I tried another thing. After compilation,  I did "make modules_install" in
xcp ddk in order to use following command

mkinitrd -f ./initrd-2.6.32.img 2.6.32

I get following errors...

modinfo: could not find module ide-disk
No module ide-disk found for kernel 2.6.32, aborting

My boot disk is ide and looking into .config didn't give me any ideas as to
what has to be enabled.

Thanks

On Sat, Mar 27, 2010 at 6:32 PM, Ritu kaur <ritu.kaur.us@gmail.com> wrote:

> Thanks Pasi. I had used following command to regenerate initrd image in xcp
> ddk
>
> mkinitrd -f ./initrd-2.6.32.img  2.6.27.42-0.1.1.xs0.1.1.737.1065xen
>
> it doesn't work either. While booting screen goes blank immediately after I
> see
>
> ...
>  Booting:MBI=0x00010120, entry=0x00100000
>
> and next thing I see is BIOS setup, so not sure connecting serial cable
> will reveal anything more. Inputs appreciated.
>
> Thanks
>
>
> On Sat, Mar 27, 2010 at 11:43 AM, Pasi Kärkkäinen <pasik@iki.fi> wrote:
>
>> On Sat, Mar 27, 2010 at 11:28:12AM -0700, Ritu kaur wrote:
>> >    Any inputs on this? I compiled xen/next kernel in Debian Lenny and
>> booted
>> >    successfully as a domU(I am using same .config file which I used to
>> build
>> >    under xcp-ddk). Looks to me xen/next doesn't work with xcp0.1.1.
>> >
>>
>> You need to re-generate the dom0 kernel initrd to match your kernel.
>> You cannot use the default xcp initrd image.
>>
>> Please provide the full serial console boot log so we can troubleshoot it:
>> http://wiki.xensource.com/xenwiki/XenSerialConsole
>>
>> -- Pasi
>>
>> >    Thanks
>> >
>> >    On Fri, Mar 26, 2010 at 12:11 PM, Ritu kaur <[1]ritu.kaur.us@[2]
>> gmail.com>
>> >    wrote:
>> >
>> >      Hi Pasi,
>> >
>> >      Messages seen with not-working case
>> >
>> >
>>  /***********************************************************************************
>> >      kernel:/boot/xen.3.4.3.gz dom0-mem=752M lowmem-emergency-pool=1M
>> >      crashkernel=64M@32M console=comX vga=mode-0x0311
>> >      loading /boot/xen.3.4.3.gz..........
>> >      Module:/boot/vmlinuz-2.6.32 root=LABEL=root-mhycetek ro Xencons=hvc
>> >      console=hvc0 console=tty0 quiet vga=785 splash
>> >      Loading /boot/vmlinuz-2.6.32.........
>> >      Module:/boot/initrd-2.6-xen.img
>> >      Loading
>> >
>>  /boot/initrd-2.6-xen.img...............................................................................................
>> >      Booting:MBI=0x00010120, entry=0x00100000
>> >
>>  ***************************************************************************************/
>> >
>> >      Screen is blank after these messages and system returns to BIOS
>> setup.
>> >
>> >      Messages seen with working case
>> >
>>  /***********************************************************************************
>> >      kernel:/boot/xen.gz dom0-mem=752M lowmem-emergency-pool=1M
>> >      crashkernel=64M@32M comsole=comX vga=mode-0x0311
>> >      loading /boot/xen.gz..........
>> >      Module:/boot/vmlinuz-2.6.xen root=LABEL=root-mhycetek ro
>> Xencons=hvc
>> >      console=hvc0 console=tty0 quiet vga=785 splash
>> >      Loading /boot/vmlinuz-2.6.xen.........
>> >      Module:/boot/initrd-2.6-xen.img
>> >      Loading
>> >
>>  /boot/initrd-2.6-xen.img...............................................................................................
>> >      Booting:MBI=0x00010120, entry=0x00100000
>> >
>>  ***************************************************************************************/
>> >
>> >      Versions used in Non-working case
>> >
>> >      xen - 3.4.3/4.0.0
>> >      kernel - xen/next
>> >      initrd - default one which came with xcp0.1.1 download.(Ps note, in
>> xcp
>> >      ddk cannot build initrd image)
>> >
>> >      in Working case
>> >
>> >      xen - 3.4.2
>> >      kernel - xcp 0.1.1
>> >      initrd - one that came with xcp 0.1.1
>> >
>> >      Checked in my .config and changed CONFIG_PHYSICAL_START to
>> 0x00100000
>> >      and CONFIG_PHYSICAL_ALIGN=0x100000, didn't help.
>> >
>> >      Inputs appreciated.
>> >
>> >      Thanks
>> >
>> > References
>> >
>> >    Visible links
>> >    1. http://ritu.kaur.us/
>> >    2. http://gmail.com/
>>
>> > _______________________________________________
>> > Xen-devel mailing list
>> > Xen-devel@lists.xensource.com
>> > http://lists.xensource.com/xen-devel
>>
>>
>