* collecting info on platforms with VT-d BIOS problems
@ 2010-01-23 0:22 Kay, Allen M
2010-01-23 8:09 ` Fantu
` (5 more replies)
0 siblings, 6 replies; 12+ messages in thread
From: Kay, Allen M @ 2010-01-23 0:22 UTC (permalink / raw)
To: 'xen-devel@lists.xensource.com'; +Cc: Han, Weidong
We would like to collect information on platforms that have problem with VT-d PCI device passthrough using non-IGD PCI devices. Note that IGD (integrated display device) device passthrough code is still being worked on.
If you have encountered VT-d problems on a particular platform using latest xen-unstable, please provide the following information so that we can work with OEM's to get their BIOS's fixed:
(a) Platform details (OEM, Product/Model#, Other identifying info)
(b) BIOS version/number
(c) Version of Xen with which failure is seen (if not the latest xen-unstable)
(d) Specific error/failure details such as serial log
Thanks!
Allen
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: collecting info on platforms with VT-d BIOS problems
2010-01-23 0:22 collecting info on platforms with VT-d BIOS problems Kay, Allen M
@ 2010-01-23 8:09 ` Fantu
2010-01-23 13:11 ` Pasi Kärkkäinen
` (4 subsequent siblings)
5 siblings, 0 replies; 12+ messages in thread
From: Fantu @ 2010-01-23 8:09 UTC (permalink / raw)
To: xen-devel
Motherboard Asus P6T SE with last bios (0704) on xen-unstable with kernel
2.6.31.6 pv_ops
(XEN) [VT-D]dmar.c:548: Host address width 39
(XEN) [VT-D]dmar.c:557: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:374: dmaru->address = fbfff000
(XEN) [VT-D]dmar.c:326: endpoint: 0:1b.0
(XEN) [VT-D]dmar.c:557: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:374: dmaru->address = fbffe000
(XEN) [VT-D]dmar.c:331: IOAPIC: f0:1f.7
(XEN) [VT-D]dmar.c:331: IOAPIC: 0:13.0
(XEN) [VT-D]dmar.c:386: flags: INCLUDE_ALL
(XEN) [VT-D]dmar.c:561: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:446: RMRR region: base_addr ec000 end_address effff
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.1
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.2
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.7
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.1
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.2
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.7
(XEN) [VT-D]dmar.c:561: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:417: RMRR error: base_addr bf7dc000 end_address bf7dbfff
(XEN) Failed to parse ACPI DMAR. Disabling VT-d.
Kay, Allen M wrote:
>
> We would like to collect information on platforms that have problem with
> VT-d PCI device passthrough using non-IGD PCI devices. Note that IGD
> (integrated display device) device passthrough code is still being worked
> on.
>
> If you have encountered VT-d problems on a particular platform using
> latest xen-unstable, please provide the following information so that we
> can work with OEM's to get their BIOS's fixed:
>
> (a) Platform details (OEM, Product/Model#, Other identifying info)
> (b) BIOS version/number
> (c) Version of Xen with which failure is seen (if not the latest
> xen-unstable)
> (d) Specific error/failure details such as serial log
>
> Thanks!
>
> Allen
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
>
--
View this message in context: http://old.nabble.com/collecting-info-on-platforms-with-VT-d-BIOS-problems-tp27281966p27284201.html
Sent from the Xen - Dev mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: collecting info on platforms with VT-d BIOS problems
2010-01-23 0:22 collecting info on platforms with VT-d BIOS problems Kay, Allen M
2010-01-23 8:09 ` Fantu
@ 2010-01-23 13:11 ` Pasi Kärkkäinen
2010-01-25 15:25 ` Andrew Oakley
` (3 subsequent siblings)
5 siblings, 0 replies; 12+ messages in thread
From: Pasi Kärkkäinen @ 2010-01-23 13:11 UTC (permalink / raw)
To: Kay, Allen M; +Cc: 'xen-devel@lists.xensource.com', Han, Weidong
On Fri, Jan 22, 2010 at 04:22:08PM -0800, Kay, Allen M wrote:
> We would like to collect information on platforms that have problem with VT-d PCI device passthrough using non-IGD PCI devices. Note that IGD (integrated display device) device passthrough code is still being worked on.
>
> If you have encountered VT-d problems on a particular platform using latest xen-unstable, please provide the following information so that we can work with OEM's to get their BIOS's fixed:
>
> (a) Platform details (OEM, Product/Model#, Other identifying info)
> (b) BIOS version/number
> (c) Version of Xen with which failure is seen (if not the latest xen-unstable)
> (d) Specific error/failure details such as serial log
>
> Thanks!
>
I forwarded this email to xen-users.. Might get some feedback from there.
-- Pasi
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: collecting info on platforms with VT-d BIOS problems
2010-01-23 0:22 collecting info on platforms with VT-d BIOS problems Kay, Allen M
2010-01-23 8:09 ` Fantu
2010-01-23 13:11 ` Pasi Kärkkäinen
@ 2010-01-25 15:25 ` Andrew Oakley
2010-01-25 16:35 ` Sander Eikelenboom
2010-01-25 15:59 ` Christian Tramnitz
` (2 subsequent siblings)
5 siblings, 1 reply; 12+ messages in thread
From: Andrew Oakley @ 2010-01-25 15:25 UTC (permalink / raw)
To: 'xen-devel@lists.xensource.com'; +Cc: Han, Weidong
Kay, Allen M wrote:
> We would like to collect information on platforms that have problem
> with VT-d PCI device passthrough using non-IGD PCI devices. Note
> that IGD (integrated display device) device passthrough code is still
> being worked on.
>
> If you have encountered VT-d problems on a particular platform using
> latest xen-unstable, please provide the following information so that
> we can work with OEM's to get their BIOS's fixed:
I've had issues with the ASUS P5E-VM DO on the latest (0902) BIOS. I
had given up trying to get this fixed, so I don't have a Xen install on
there at the moment.
I investigated the problem in May last year and discovered that one of
the RMRR entries had a base address that was greater than its limit
address. This didn't seem to happen when using integrated graphics.
Let me know if this is sufficient information, or should I be getting
Xen booting again so you can see the log, or perhaps a dump of the DMAR
table is sufficient?
Thanks
--
Andrew Oakley
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: collecting info on platforms with VT-d BIOS problems
2010-01-25 15:25 ` Andrew Oakley
@ 2010-01-25 16:35 ` Sander Eikelenboom
2010-02-01 13:04 ` Andrew Oakley
0 siblings, 1 reply; 12+ messages in thread
From: Sander Eikelenboom @ 2010-01-25 16:35 UTC (permalink / raw)
To: Andrew Oakley; +Cc: 'xen-devel@lists.xensource.com', Han, Weidong
Hello Andrew,
Seems this problem is on a lot of Asus motherboards, i have a similar (not the same) motherboard (P5Q-EM DO), and have had the same problem.
But Weidongs recent workarounds in xen-unstable don't disable vt-d anymore but ignore the RMRR, so if you wish to give Xen and vt-d a try again, I think it will work for you as well.
--
Sander
Monday, January 25, 2010, 4:25:31 PM, you wrote:
> Kay, Allen M wrote:
>> We would like to collect information on platforms that have problem
>> with VT-d PCI device passthrough using non-IGD PCI devices. Note
>> that IGD (integrated display device) device passthrough code is still
>> being worked on.
>>
>> If you have encountered VT-d problems on a particular platform using
>> latest xen-unstable, please provide the following information so that
>> we can work with OEM's to get their BIOS's fixed:
> I've had issues with the ASUS P5E-VM DO on the latest (0902) BIOS. I
> had given up trying to get this fixed, so I don't have a Xen install on
> there at the moment.
> I investigated the problem in May last year and discovered that one of
> the RMRR entries had a base address that was greater than its limit
> address. This didn't seem to happen when using integrated graphics.
> Let me know if this is sufficient information, or should I be getting
> Xen booting again so you can see the log, or perhaps a dump of the DMAR
> table is sufficient?
> Thanks
--
Best regards,
Sander mailto:linux@eikelenboom.it
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: collecting info on platforms with VT-d BIOS problems
2010-01-25 16:35 ` Sander Eikelenboom
@ 2010-02-01 13:04 ` Andrew Oakley
0 siblings, 0 replies; 12+ messages in thread
From: Andrew Oakley @ 2010-02-01 13:04 UTC (permalink / raw)
To: Sander Eikelenboom
Cc: Kay, Allen M, 'xen-devel@lists.xensource.com',
Han, Weidong
Sander Eikelenboom wrote:
> Hello Andrew,
>
> Seems this problem is on a lot of Asus motherboards, i have a similar
> (not the same) motherboard (P5Q-EM DO), and have had the same
> problem. But Weidongs recent workarounds in xen-unstable don't
> disable vt-d anymore but ignore the RMRR, so if you wish to give Xen
> and vt-d a try again, I think it will work for you as well.
This does seem to "work" now on my board - at least Xen starts without
disabling VT-d (I haven't managed to actually use a passed through
device).
>
> -- Sander
>
>
> Monday, January 25, 2010, 4:25:31 PM, you wrote:
>
>> Kay, Allen M wrote:
>>> We would like to collect information on platforms that have
>>> problem with VT-d PCI device passthrough using non-IGD PCI
>>> devices. Note that IGD (integrated display device) device
>>> passthrough code is still being worked on.
>>>
>>> If you have encountered VT-d problems on a particular platform
>>> using latest xen-unstable, please provide the following
>>> information so that we can work with OEM's to get their BIOS's
>>> fixed:
>
>> I've had issues with the ASUS P5E-VM DO on the latest (0902) BIOS.
>> I had given up trying to get this fixed, so I don't have a Xen
>> install on there at the moment.
>
>> I investigated the problem in May last year and discovered that one
>> of the RMRR entries had a base address that was greater than its
>> limit address. This didn't seem to happen when using integrated
>> graphics.
>
>> Let me know if this is sufficient information, or should I be
>> getting Xen booting again so you can see the log, or perhaps a dump
>> of the DMAR table is sufficient?
>
>> Thanks
>
>
>
>
--
Andrew Oakley
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: collecting info on platforms with VT-d BIOS problems
2010-01-23 0:22 collecting info on platforms with VT-d BIOS problems Kay, Allen M
` (2 preceding siblings ...)
2010-01-25 15:25 ` Andrew Oakley
@ 2010-01-25 15:59 ` Christian Tramnitz
2010-01-25 16:26 ` Sander Eikelenboom
2010-03-29 7:20 ` collecting info on platforms with VT-d BIOS problems / Supermicro X7SB4 Pasi Kärkkäinen
5 siblings, 0 replies; 12+ messages in thread
From: Christian Tramnitz @ 2010-01-25 15:59 UTC (permalink / raw)
To: xen-devel
Hi Allen,
thanks for taking care of this!
You may already know those two (we have been in contact regarding the
P6T before, you provided me a beta bios that worked around this):
1)
(a) Asus P6T Deluxe
(b) all (except you provided beta BIOS) including latest 1904
(c) all (even with iommu_include_reserved)
(d) xm dmesg shows:
(XEN) Command line: dom0_mem=1024M iommu=1 iommu_include_reserved=1
...
(XEN) [VT-D]dmar.c:473: Host address width 39
(XEN) [VT-D]dmar.c:482: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:337: dmaru->address = fbfff000
(XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1b.0
(XEN) [VT-D]dmar.c:482: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:337: dmaru->address = fbffe000
(XEN) [VT-D]dmar.c:294: found IOAPIC: bdf = f0:1f.7
(XEN) [VT-D]dmar.c:294: found IOAPIC: bdf = 0:13.0
(XEN) [VT-D]dmar.c:346: found INCLUDE_ALL
(XEN) [VT-D]dmar.c:486: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1d.0
(XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1d.1
(XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1d.2
(XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1d.7
(XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1a.0
(XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1a.1
(XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1a.2
(XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1a.7
(XEN) [VT-D]dmar.c:486: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:376: RMRR error: base_addr bf7dc000 end_address bf7dbfff
(XEN) Failed to parse ACPI DMAR. Disabling VT-d.
2)
(a) Asus P5E-VM DO
(b) 0702 (latest)
(c) all (even with iommu_include_reserved)
(d) as soon as the IGD is disabled in the BIOS "xm dmesg" shows:
(XEN) ACPI: HPET id: 0xffffffff base: 0xfed00000
(XEN) [VT-D]dmar.c:485: Host address width 36
(XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:349: dmaru->address = fed90000
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1b.0
(XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:349: dmaru->address = fed92000
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:3.0
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:3.2
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:3.3
(XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:349: dmaru->address = fed93000
(XEN) [VT-D]dmar.c:358: found INCLUDE_ALL
(XEN) [VT-D]dmar.c:498: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.0
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.1
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.2
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.7
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.0
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.1
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.2
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.7
(XEN) [VT-D]dmar.c:498: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:388: RMRR error: base_addr d0000000 end_address cfffffff
(XEN) Failed to parse ACPI DMAR. Disabling VT-d.
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: collecting info on platforms with VT-d BIOS problems
2010-01-23 0:22 collecting info on platforms with VT-d BIOS problems Kay, Allen M
` (3 preceding siblings ...)
2010-01-25 15:59 ` Christian Tramnitz
@ 2010-01-25 16:26 ` Sander Eikelenboom
2010-03-29 7:20 ` collecting info on platforms with VT-d BIOS problems / Supermicro X7SB4 Pasi Kärkkäinen
5 siblings, 0 replies; 12+ messages in thread
From: Sander Eikelenboom @ 2010-01-25 16:26 UTC (permalink / raw)
To: Kay, Allen M; +Cc: 'xen-devel@lists.xensource.com', Han, Weidong
[-- Attachment #1: Type: text/plain, Size: 1925 bytes --]
Hello Allen,
My problem before Weidongs workarounds was that VT-D would be switched off due to RMRR base address > end address when using a pci-e graphics card which disables the IGD on my platform (Q45 chipset).
Since his workarounds this doesn't happen anymore though one warning remains.
So there are to issues:
- RMRR address range not in reserved memory base = 7f000000 end = 7effffff; iommu_inclusive_mapping=1 parameter may be needed.
- And as you see if it was included this RMRR is still invalid because the base address > end address (which was previously the cause that xen switched off vt-d alltogether, but this error isn't reported separately anymore)
I have attached:
- xm info output, that should satisfy (c)
- serial log booting with and without iommu_inclusive_mapping=1 option, this should satisfy (d)
- output lspci -vvvknn
Ad (a):
- Asus P5Q-EM DO
- Q45 intel chipset
- Q9400 intel processor
- Ati Radeon HD 4850 GPU
Ad (b):
- bios version (latest available): P5Q-EM DO 1102 BIOS, date 2009/06/05
Regards,
Sander
Saturday, January 23, 2010, 1:22:08 AM, you wrote:
> We would like to collect information on platforms that have problem with VT-d PCI device passthrough using non-IGD PCI devices. Note that IGD (integrated display device) device passthrough code is still being worked on.
> If you have encountered VT-d problems on a particular platform using latest xen-unstable, please provide the following information so that we can work with OEM's to get their BIOS's fixed:
> (a) Platform details (OEM, Product/Model#, Other identifying info)
> (b) BIOS version/number
> (c) Version of Xen with which failure is seen (if not the latest xen-unstable)
> (d) Specific error/failure details such as serial log
> Thanks!
> Allen
--
Best regards,
Sander mailto:linux@eikelenboom.it
[-- Attachment #2: lspci-vtd.txt --]
[-- Type: text/plain, Size: 25225 bytes --]
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e10] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e11] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: ASUSTeK Computer Inc. Device [1043:82d3]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0f00c Data: 4171
Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x16, ASPM L0s, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep- BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 75.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Capabilities: [140] Root Complex Link <?>
Kernel driver in use: pcieport-driver
00:03.0 Communication controller [0780]: Intel Corporation 4 Series Chipset HECI Controller [8086:2e14] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fe8ff000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3 Gigabit Network Connection [8086:10de] (rev 02)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 411
Region 0: Memory at fe8c0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fe8fe000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at cc00 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee0100c Data: 41a1
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c480 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #5 [8086:3a68] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at c800 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #6 [8086:3a69] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c880 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation ICH10 USB2 EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe8fd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] Vendor Specific Information <?>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation ICH10 HD Audio Controller [8086:3a6e] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:82fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe8f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation ICH10 PCI Express Port 1 [8086:3a70] (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 10.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0f00c Data: 4179
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
00:1c.4 PCI bridge [0604]: Intel Corporation ICH10 PCI Express Port 5 [8086:3a78] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 10.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0f00c Data: 4181
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #1 [8086:3a64] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at c000 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #2 [8086:3a65] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at c080 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #3 [8086:3a66] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c400 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation ICH10 USB2 EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe8fc000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] Vendor Specific Information <?>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
00:1f.0 ISA bridge [0601]: Intel Corporation ICH10 LPC Interface Controller [8086:3a14] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
00:1f.2 SATA controller [0106]: Intel Corporation ICH10 6 port SATA AHCI Controller [8086:3a02] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 412
Region 0: I/O ports at b880 [size=8]
Region 1: I/O ports at b800 [size=4]
Region 2: I/O ports at b480 [size=8]
Region 3: I/O ports at b400 [size=4]
Region 4: I/O ports at b080 [size=32]
Region 5: Memory at fe8f2000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/3 Enable+
Address: fee0100c Data: 4189
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA <?>
Capabilities: [b0] Vendor Specific Information <?>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation ICH10 SMBus Controller [8086:3a60] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe8f3000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV770 [Radeon HD 4850] [1002:9442] (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe9e0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at d000 [size=256]
Expansion ROM at fe9c0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100] Vendor Specific Information <?>
01:00.1 Audio device [0403]: ATI Technologies Inc HD48x0 audio [1002:aa30]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100] Vendor Specific Information <?>
Kernel driver in use: HDA Intel
02:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e880 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e480 [size=4]
Region 4: I/O ports at e400 [size=16]
Region 5: Memory at feaff000 (32-bit, non-prefetchable) [size=512]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 unlimited
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
04:03.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW323 [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8294]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[-- Attachment #3: xen-serial-log.txt --]
[-- Type: text/plain, Size: 40567 bytes --]
__ __ _ _ ___ ___ ____
\ \/ /___ _ __ | || | / _ \ / _ \ _ __ ___|___ \ _ __ _ __ ___
\ // _ \ '_ \ | || |_| | | | | | |__| '__/ __| __) |__| '_ \| '__/ _ \
/ \ __/ | | | |__ _| |_| | |_| |__| | | (__ / __/|__| |_) | | | __/
/_/\_\___|_| |_| |_|(_)___(_)___/ |_| \___|_____| | .__/|_| \___|
|_|
(XEN) Xen version 4.0.0-rc2-pre (root@) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) Thu Jan 21 08:45:35 CET 2010
(XEN) Latest ChangeSet: Thu Jan 21 11:27:11 2010 +0000 20836:cec57fd4565e
(XEN) Command line: dom0_mem=512M com1=115200,8n1 console=com1 loglvl=all loglvl_guest=all
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) EDID info not retrieved because of reasons unknown
(XEN) Disc information:
(XEN) Found 0 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009e800 (usable)
(XEN) 000000000009e800 - 00000000000a0000 (reserved)
(XEN) 00000000000e4000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000007ee70000 (usable)
(XEN) 000000007ee70000 - 000000007ee7e000 (ACPI data)
(XEN) 000000007ee7e000 - 000000007eed0000 (ACPI NVS)
(XEN) 000000007eed0000 - 000000007ef00000 (reserved)
(XEN) 00000000fed00000 - 00000000fed01100 (reserved)
(XEN) 00000000fed02000 - 00000000fed14c00 (reserved)
(XEN) 00000000fed20000 - 00000000fed40000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ffe00000 - 0000000100000000 (reserved)
(XEN) System RAM: 1999MB (2047104kB)
(XEN) ACPI: RSDP 000FB080, 0024 (r2 ACPIAM)
(XEN) ACPI: XSDT 7EE70100, 0064 (r1 A_M_I_ OEMXSDT 5000927 MSFT 97)
(XEN) ACPI: FACP 7EE70290, 00F4 (r3 A_M_I_ OEMFACP 5000927 MSFT 97)
(XEN) ACPI: DSDT 7EE70440, 841F (r1 A1065 A1065000 0 INTL 20060113)
(XEN) ACPI: FACS 7EE7E000, 0040
(XEN) ACPI: APIC 7EE70390, 006C (r1 A_M_I_ OEMAPIC 5000927 MSFT 97)
(XEN) ACPI: MCFG 7EE70400, 003C (r1 A_M_I_ OEMMCFG 5000927 MSFT 97)
(XEN) ACPI: OEMB 7EE7E040, 0089 (r1 A_M_I_ AMI_OEM 5000927 MSFT 97)
(XEN) ACPI: HPET 7EE78860, 0038 (r1 A_M_I_ OEMHPET 5000927 MSFT 97)
(XEN) ACPI: GSCI 7EE7E0D0, 2024 (r1 A_M_I_ GMCHSCI 5000927 MSFT 97)
(XEN) ACPI: DMAR 7EE80100, 0138 (r1 AMI OEMDMAR 1 MSFT 97)
(XEN) ACPI: SSDT 7EE811B0, 0A7C (r1 DpgPmm CpuPm 12 INTL 20060113)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-000000007ee70000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[7ee7e00c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
(XEN) Processor #2 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
(XEN) Processor #3 7:7 APIC version 20
(XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) [VT-D]dmar.c:586: Host address width 36
(XEN) [VT-D]dmar.c:595: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:374: dmaru->address = fed90000
(XEN) [VT-D]dmar.c:326: endpoint: 0:1b.0
(XEN) [VT-D]dmar.c:595: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:374: dmaru->address = fed92000
(XEN) [VT-D]dmar.c:326: endpoint: 0:3.0
(XEN) [VT-D]dmar.c:595: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:374: dmaru->address = fed93000
(XEN) [VT-D]dmar.c:386: flags: INCLUDE_ALL
(XEN) [VT-D]dmar.c:599: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.1
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.2
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.7
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.1
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.2
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.7
(XEN) [VT-D]dmar.c:490: RMRR region: base_addr ed000 end_address effff
(XEN) [VT-D]dmar.c:599: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:425: RMRR address range not in reserved memory base = 7f000000 end = 7effffff; iommu_inclusive_mapp
ing=1 parameter may be needed.
(XEN) [VT-D]dmar.c:599: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.1
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.2
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.7
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.1
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.2
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.7
(XEN) [VT-D]dmar.c:490: RMRR region: base_addr 7eee0000 end_address 7eeeffff
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: Not using MMCONFIG.
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2666.415 MHz processor.
(XEN) Initing memory sharing.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 3072K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs disabled.
(XEN) HVM: VMX enabled
(XEN) xsave_init: cpu0: cntxt_max_size: 0x240 and states: 00000000:00000003
(XEN) xsave_init: using cntxt_size: 0x240 and states: 00000000:00000003
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU0 has no CMCI support
(XEN) [VT-D]iommu.c:1062: drhd->address = fed92000
(XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff57000
(XEN) [VT-D]iommu.c:1062: drhd->address = fed90000
(XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff56000
(XEN) [VT-D]iommu.c:1062: drhd->address = fed93000
(XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff55000
(XEN) Intel VT-d Snoop Control not supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation not supported.
(XEN) Intel VT-d Interrupt Remapping not supported.
(XEN) I/O virtualisation enabled
(XEN) I/O virtualisation for PV guests disabled
(XEN) CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
(XEN) Booting processor 1/1 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 3072K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) HVM: ASIDs disabled.
(XEN) xsave_init: cpu1: cntxt_max_size: 0x240 and states: 00000000:00000003
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU1 has no CMCI support
(XEN) CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
(XEN) Booting processor 2/2 eip 8c000
(XEN) Initializing CPU#2
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 3072K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 2
(XEN) HVM: ASIDs disabled.
(XEN) xsave_init: cpu2: cntxt_max_size: 0x240 and states: 00000000:00000003
(XEN) Intel machine check reporting enabled on CPU#2.
(XEN) CPU2: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU2 has no CMCI support
(XEN) CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
(XEN) Booting processor 3/3 eip 8c000
(XEN) Initializing CPU#3
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 3072K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 3
(XEN) HVM: ASIDs disabled.
(XEN) xsave_init: cpu3: cntxt_max_size: 0x240 and states: 00000000:00000003
(XEN) Intel machine check reporting enabled on CPU#3.
(XEN) CPU3: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU3 has no CMCI support
(XEN) CPU3: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 4 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) Brought up 4 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
(XEN) HPET: 8 timers in total, 8 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:0.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:0.0: no extended config
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1.0: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:3.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:3.0: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:19.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:19.0: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1a.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.0: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1a.1
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.1: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1a.2
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.2: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1a.7
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.7: no extended config
(XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 0:1b.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1b.0: no extended config
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1c.0: no extended config
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1c.4: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.0: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.1
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.1: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.2
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.2: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.7
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.7: no extended config
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1e.0: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1f.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1f.0: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1f.2
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1f.2: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1f.3
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1f.3: no extended config
(XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 1:0.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:1:0.0: no extended config
(XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 1:0.1
(XEN) [VT-D]mmconfig-shared.c:460: next cap:1:0.1: no extended config
(XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 2:0.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:2:0.0: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 4:3.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:4:3.0: no extended config
(XEN) [VT-D]iommu.c:684: iommu_enable_translation: iommu->reg = ffff82c3fff57000
(XEN) [VT-D]iommu.c:684: iommu_enable_translation: iommu->reg = ffff82c3fff56000
(XEN) [VT-D]iommu.c:684: iommu_enable_translation: iommu->reg = ffff82c3fff55000
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x90c000
(XEN) elf_parse_binary: phdr: paddr=0x190c000 memsz=0x121fb8
(XEN) elf_parse_binary: phdr: paddr=0x1a2e000 memsz=0x888
(XEN) elf_parse_binary: phdr: paddr=0x1a2f000 memsz=0x158e0
(XEN) elf_parse_binary: phdr: paddr=0x1a448e0 memsz=0x1b2720
(XEN) elf_parse_binary: memory: 0x1000000 -> 0x1bf7000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff81a44ae0
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
(XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xffffffff80000000
(XEN) elf_paddr_offset = 0x0
(XEN) virt_offset = 0xffffffff80000000
(XEN) virt_kstart = 0xffffffff81000000
(XEN) virt_kend = 0xffffffff81bf7000
(XEN) virt_entry = 0xffffffff81a44ae0
(XEN) p2m_base = 0xffffffffffffffff
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1bf7000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000074000000->0000000078000000 (114688 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81bf7000
(XEN) Init. ramdisk: ffffffff81bf7000->ffffffff822a6a00
(XEN) Phys-Mach map: ffffffff822a7000->ffffffff823a7000
(XEN) Start info: ffffffff823a7000->ffffffff823a74b4
(XEN) Page tables: ffffffff823a8000->ffffffff823bf000
(XEN) Boot stack: ffffffff823bf000->ffffffff823c0000
(XEN) TOTAL: ffffffff80000000->ffffffff82800000
(XEN) ENTRY ADDRESS: ffffffff81a44ae0
(XEN) Dom0 has maximum 4 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff8190c000
(XEN) elf_load_binary: phdr 1 at 0xffffffff8190c000 -> 0xffffffff81a2dfb8
(XEN) elf_load_binary: phdr 2 at 0xffffffff81a2e000 -> 0xffffffff81a2e888
(XEN) elf_load_binary: phdr 3 at 0xffffffff81a2f000 -> 0xffffffff81a448e0
(XEN) elf_load_binary: phdr 4 at 0xffffffff81a448e0 -> 0xffffffff81aca000
(XEN) Scrubbing Free RAM: ..............done.
(XEN) Xen trace buffers: disabled
(XEN) tmem: initialized comp=0 global-lock=0
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 156kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31.6 (root@xentest) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #3 SMP Thu Jan 21 10:04:50
CET 2010
[ 0.000000] Command line: root=/dev/sda1 ro earlyprintk=xen console=hvc0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] xen_release_chunk: looking at area pfn 20000-7ee70
[ 0.000000] xen_release_chunk: looking at area pfn 7ef00-fec00
[ 0.000000] xen_release_chunk: looking at area pfn fec01-fed00
[ 0.000000] xen_release_chunk: looking at area pfn fed15-fed20
[ 0.000000] xen_release_chunk: looking at area pfn fed40-fee00
[ 0.000000] xen_release_chunk: looking at area pfn fee01-ffe00
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] Xen: 000000000009e800 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] Xen: 000000007ee70000 - 000000007ee7e000 (ACPI data)
[ 0.000000] Xen: 000000007ee7e000 - 000000007eed0000 (ACPI NVS)
[ 0.000000] Xen: 000000007eed0000 - 000000007ef00000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] Xen: 00000000fed00000 - 00000000fed01100 (reserved)
[ 0.000000] Xen: 00000000fed02000 - 00000000fed14c00 (reserved)
[ 0.000000] Xen: 00000000fed20000 - 00000000fed40000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] console [xenboot0] enabled
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009e800 (usable)
[ 0.000000] modified: 000000000009e800 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] modified: 000000007ee70000 - 000000007ee7e000 (ACPI data)
[ 0.000000] modified: 000000007ee7e000 - 000000007eed0000 (ACPI NVS)
[ 0.000000] modified: 000000007eed0000 - 000000007ef00000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed01100 (reserved)
[ 0.000000] modified: 00000000fed02000 - 00000000fed14c00 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000fed40000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000
[ 0.000000] RAMDISK: 01bf7000 - 022a6a00
[ 0.000000] ACPI: RSDP 00000000000fb080 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 000000007ee70100 00064 (v01 A_M_I_ OEMXSDT 05000927 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ee70290 000F4 (v03 A_M_I_ OEMFACP 05000927 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ee70440 0841F (v01 A1065 A1065000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 000000007ee7e000 00040
[ 0.000000] ACPI: APIC 000000007ee70390 0006C (v01 A_M_I_ OEMAPIC 05000927 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ee70400 0003C (v01 A_M_I_ OEMMCFG 05000927 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007ee7e040 00089 (v01 A_M_I_ AMI_OEM 05000927 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007ee78860 00038 (v01 A_M_I_ OEMHPET 05000927 MSFT 00000097)
[ 0.000000] ACPI: GSCI 000000007ee7e0d0 02024 (v01 A_M_I_ GMCHSCI 05000927 MSFT 00000097)
[ 0.000000] ACPI: 000000007ee80100 00138 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000007ee811b0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0020000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [00023a8000 - 00023bf000] XEN PAGETABLES ==> [00023a8000 - 00023bf000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001bd66f4] TEXT DATA BSS ==> [0001000000 - 0001bd66f4]
[ 0.000000] #4 [0001bf7000 - 00022a6a00] RAMDISK ==> [0001bf7000 - 00022a6a00]
[ 0.000000] #5 [00022a7000 - 00023a8000] XEN START INFO ==> [00022a7000 - 00023a8000]
[ 0.000000] #6 [0001bd7000 - 0001bd7298] BRK ==> [0001bd7000 - 0001bd7298]
[ 0.000000] #7 [0000100000 - 00001e8000] PGTABLE ==> [0000100000 - 00001e8000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=0, irq=0
(XEN) ioapic_guest_write: new_entry=00010900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=2, irq=0
(XEN) ioapic_guest_write: new_entry=00010900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) irq.c:1431: dom0: pirq 0 or irq 3 already mapped
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=4, irq=4
(XEN) ioapic_guest_write: new_entry=00010900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) irq.c:1431: dom0: pirq 0 or irq 5 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 6 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 7 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 8 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 9 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 10 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 11 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 12 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 13 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 14 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 15 already mapped
(XEN) allocated vector for irq:16
(XEN) irq.c:1431: dom0: pirq 0 or irq 16 already mapped
(XEN) allocated vector for irq:17
(XEN) irq.c:1431: dom0: pirq 0 or irq 17 already mapped
(XEN) allocated vector for irq:18
(XEN) irq.c:1431: dom0: pirq 0 or irq 18 already mapped
(XEN) allocated vector for irq:19
(XEN) irq.c:1431: dom0: pirq 0 or irq 19 already mapped
(XEN) allocated vector for irq:20
(XEN) irq.c:1431: dom0: pirq 0 or irq 20 already mapped
(XEN) allocated vector for irq:21
(XEN) irq.c:1431: dom0: pirq 0 or irq 21 already mapped
(XEN) allocated vector for irq:22
(XEN) irq.c:1431: dom0: pirq 0 or irq 22 already mapped
(XEN) allocated vector for irq:23
(XEN) irq.c:1431: dom0: pirq 0 or irq 23 already mapped
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ef00000 (gap: 7ef00000:7fd00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Allocated 22 4k pages, static data 88288 bytes
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128931
[ 0.000000] Kernel command line: root=/dev/sda1 ro earlyprintk=xen console=hvc0
[ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB)
[ 0.000000] Placing 64MB Xen software IO TLB between ffff880002ec0000 - ffff880006ec0000
[ 0.000000] Xen software IO TLB at phys 0x2ec0000 - 0x6ec0000
[ 0.000000] Memory: 427780k/524288k available (6256k kernel code, 456k absent, 95356k reserved, 4167k data, 568k init
)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=0, irq=0
(XEN) ioapic_guest_write: new_entry=00000900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[ 0.000000] xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=4, irq=4
(XEN) ioapic_guest_write: new_entry=00000904
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[ 0.000000] xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9 triggering 1 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin 10 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin 11 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin 14 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin 15 triggering 0 polarity 0
[ 0.000000] Detected 2666.414 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console handover: boot [xenboot0] -> real [hvc0]
[ 0.000999] installing Xen timer for CPU 0
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.82 BogoMIPS (lpj=2666414)
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Initializing.
[ 0.000999] Mount-cache hash table entries: 256
[ 0.000999] Initializing cgroup subsys ns
[ 0.000999] Initializing cgroup subsys cpuacct
[ 0.000999] Initializing cgroup subsys freezer
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 3072K
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 0
[ 0.000999] mce: CPU supports 6 MCE banks
[ 0.000999] Performance Counters: unsupported p6 CPU model 23 no PMU driver, software counters only.
[ 0.000999] SMP alternatives: switching to UP code
[ 0.001282] ACPI: Core revision 20090521
[ 0.014720] installing Xen timer for CPU 1
[ 0.014756] SMP alternatives: switching to SMP code
[ 0.000007] Initializing CPU#1
[ 0.000045] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000048] CPU: L2 cache: 3072K
[ 0.000051] CPU: Physical Processor ID: 0
[ 0.000052] CPU: Processor Core ID: 1
[ 0.000055] mce: CPU supports 6 MCE banks
[ 0.015158] installing Xen timer for CPU 2
[ 0.000018] Initializing CPU#2
[ 0.000071] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000074] CPU: L2 cache: 3072K
[ 0.000077] CPU: Physical Processor ID: 0
[ 0.000078] CPU: Processor Core ID: 2
[ 0.000081] mce: CPU supports 6 MCE banks
[ 0.015439] installing Xen timer for CPU 3
[ 0.000008] Initializing CPU#3
[ 0.000044] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000047] CPU: L2 cache: 3072K
[ 0.000050] CPU: Physical Processor ID: 0
[ 0.000051] CPU: Processor Core ID: 3
[ 0.000054] mce: CPU supports 6 MCE banks
[ 0.015608] Brought up 4 CPUs
[ 0.016140] Booting paravirtualized kernel on Xen
[ 0.016140] Xen version: 4.0.0-rc2-pre (preserve-AD) (dom0)
[ 0.016140] Grant tables using version 2 layout.
[ 0.016140] Grant table initialized
[ 0.016140] Time: 7:46:04 Date: 01/25/10
[ 0.016147] NET: Registered protocol family 16
[ 0.016184] xenbus_probe_init ok
[ 0.017059] ACPI: bus type pci registered
[ 0.017087] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.017087] PCI: Not using MMCONFIG.
[ 0.017087] PCI: Using configuration type 1 for base access
[ 0.030122] bio: create slab <bio-0> at 0
[ 0.048727] ACPI: Interpreter enabled
[ 0.048737] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.048777] ACPI: Using IOAPIC for interrupt routing
[ 0.048838] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.052327] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.102089] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.115155] ACPI Warning: Incorrect checksum in table [OEMB] - 93, should be 8A 20090521 tbutils-246
[ 0.116031] ACPI Warning: Incorrect checksum in table [ ] - 96, should be DA 20090521 tbutils-246
[ 0.116240] ACPI: No dock devices found.
[ 0.116421] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.116472] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.116472] pci 0000:00:01.0: PME# disabled
[ 0.116472] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.116472] pci 0000:00:03.0: PME# disabled
[ 0.116659] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.116668] pci 0000:00:19.0: PME# disabled
[ 0.117614] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.117624] pci 0000:00:1a.7: PME# disabled
[ 0.117788] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.117797] pci 0000:00:1b.0: PME# disabled
[ 0.117915] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.117923] pci 0000:00:1c.0: PME# disabled
[ 0.117982] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.117982] pci 0000:00:1c.4: PME# disabled
[ 0.118589] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.118598] pci 0000:00:1d.7: PME# disabled
[ 0.118981] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.118981] pci 0000:00:1f.2: PME# disabled
[ 0.119817] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.119831] pci 0000:02:00.0: PME# disabled
[ 0.119981] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.119981] pci 0000:04:03.0: PME# disabled
[ 0.120053] pci 0000:00:1e.0: transparent bridge
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:03.0
(XEN) PCI add device 00:19.0
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1a.1
(XEN) PCI add device 00:1a.2
(XEN) PCI add device 00:1a.7
(XEN) PCI add device 00:1b.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.4
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) PCI add device 00:1d.2
(XEN) PCI add device 00:1d.7
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 01:00.0
(XEN) PCI add device 01:00.1
(XEN) PCI add device 02:00.0
(XEN) PCI add device 04:03.0
[ 0.144299] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.145080] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.145224] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.145369] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.145511] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.145653] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.145795] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.145936] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.146034] xenbus_probe_backend_init bus registered ok
[ 0.146034] xenbus_probe_frontend_init bus registered ok
[ 0.146034] xen_balloon: Initialising balloon driver with page order 0.
[ 0.146122] SCSI subsystem initialized
[ 0.147030] usbcore: registered new interface driver usbfs
[ 0.147041] usbcore: registered new interface driver hub
[ 0.147041] usbcore: registered new device driver usb
[ 0.148032] PCI: Using ACPI for IRQ routing
[ 0.148141] IO APIC resources couldn't be allocated.
[ 0.165039] cfg80211: Using static regulatory domain info
[ 0.165039] cfg80211: Regulatory domain: US
[ 0.165039] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.165039] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.165039] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.165039] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.165039] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.165039] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.165041] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.165052] cfg80211: Calling CRDA for country: US
[ 0.165080] NetLabel: Initializing
[ 0.165080] NetLabel: domain hash size = 128
[ 0.165080] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.165080] NetLabel: unlabeled traffic allowed by default
[ 0.172022] pnp: PnP ACPI init
[ 0.172038] ACPI: bus type pnp registered
[ 0.172623] xen_allocate_pirq: returning irq 8 for gsi 8
[ 0.172631] xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0
[ 0.172804] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.172811] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0
[ 0.173613] xen_allocate_pirq: returning irq 6 for gsi 6
[ 0.173620] xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0
[ 0.175609] xen_allocate_pirq: returning irq 4 for gsi 4
[ 0.175616] xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=4, irq=4
(XEN) ioapic_guest_write: new_entry=00000904
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[ 0.176049] xen_allocate_pirq: returning irq 1 for gsi 1
[ 0.176056] xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0
[ 0.176259] xen_allocate_pirq: returning irq 12 for gsi 12
[ 0.176266] xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0
[ 0.177525] pnp: PnP ACPI: found 18 devices
[ 0.177530] ACPI: ACPI bus type pnp unregistered
[ 0.177542] system 00:01: iomem ra[ 1.041093] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.050009] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 1.357089] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.673141] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.989141] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.305139] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.316237] Freeing unused kernel memory: 568k freed
[ 2.316415] Write protecting the kernel read-only data: 9228k
Loading, please wait...
Couldnt get a file descriptor referring to the console
KDGKBMODE: Bad file descriptor
loadkeys: error reading keyboard mode
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... kinit: name_to_dev_t(/dev/sda5) = dev(8,5)
kinit: trying to resume from /dev/sda5
[ 3.107142] PM: Starting manual resume from disk
kinit: No resume image, doing normal boot...
resume: libgcrypt version: 1.4.1
done.
[ 3.177609] kjournald starting. Commit interval 5 seconds
[ 3.177640] EXT3-fs: mounted filesystem with writeback data mode.
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
SELinux: Could not open policy file <= /etc/selinux/targeted/policy/policy.24: No such file or directory
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd[ 4.606661] udevd version 125 started
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...done.
Setting the system clock.
Activating swap...[ 6.981963] Adding 3229024k swap on /dev/sda5. Priority:-1 extents:1 across:3229024k
done.
Checking root file system...fsck 1.41.3 (12-Oct-2008)
/dev/sda1: clean, 1168912/4685824 files, 12404904/18729774 blocks
done.
[ 7.254977] EXT3 FS on sda1, internal journal
Setting the system clock.
Cleaning up ifupdown....
Loading kernel modules...done.
Checking file systems...fsck 1.41.3 (12-Oct-2008)
done.
Setting kernel variables (/etc/sysctl.conf)...done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...done.
Initializing IP Masquerading...done.
Loading IP Masquerade kernel modules...done.
[ 9.908578] ADDRCONF(NETDEV_UP): eth1: link is not ready
Setting sensors limits.
Setting console screen modes and fonts.
INIT: Entering runlevel: 2
Starting enhanced syslogd: rsyslogd.
Starting ACPI services....
Starting system message bus: dbus.
[ 11.454837] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 11.454851] 0000:00:19.0: eth1: 10/100 speed: disabling TSO
[ 11.454980] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Starting OpenBSD Secure Shell server: sshd.
Starting MTA: exim4.
Your system does not have the CPU extensions required to use KVM. Not doing anything. failed!
Setting sysfs variables....
RTNETLINK answers: File exists
[ 16.461610] xenbus_probe wake_waiting
[ 16.461636] xenbus_probe wake_waiting
[ 16.462150] XENBUS: Unable to read cpu state
[ 16.462286] XENBUS: Unable to read cpu state
[ 16.462401] XENBUS: Unable to read cpu state
[ 16.462542] XENBUS: Unable to read cpu state
[ 16.462772] xenbus_probe_devices backend
[ 16.462870] xenbus_probe_devices failed xenbus_directory
[ 16.462876] backend_probe_and_watch devices probed ok
[ 16.463022] backend_probe_and_watch watch add ok ok
[ 16.463029] backend_probe_and_watch all done
[ 16.463063] xenbus_probe_devices device
[ 16.464112] xenbus_probe_devices failed xenbus_directory
[ 16.464118] frontend_probe_and_watch devices probed ok
[ 16.464239] frontend_probe_and_watch watch add ok ok
[ 16.464246] frontend_probe_and_watch all done
RTNETLINK answers: File exists
Restoring Xen domains: linhvm
An error occurred while restoring domain linhvm:
Error: not a valid guest state file: config size read
!
winhvm
An error occurred while restoring domain winhvm:
Error: not a valid guest state file: config size read
!
[done].
Starting Hardware abstraction layer: hald.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: crond.
Debian GNU/Linux 5.0 xentest hvc0
xentest login:
[-- Attachment #4: xen-serial-log-iommu_inclusive_mapping.txt --]
[-- Type: text/plain, Size: 40584 bytes --]
__ __ _ _ ___ ___ ____
\ \/ /___ _ __ | || | / _ \ / _ \ _ __ ___|___ \ _ __ _ __ ___
\ // _ \ '_ \ | || |_| | | | | | |__| '__/ __| __) |__| '_ \| '__/ _ \
/ \ __/ | | | |__ _| |_| | |_| |__| | | (__ / __/|__| |_) | | | __/
/_/\_\___|_| |_| |_|(_)___(_)___/ |_| \___|_____| | .__/|_| \___|
|_|
(XEN) Xen version 4.0.0-rc2-pre (root@) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) Thu Jan 21 08:45:35 CET 2010
(XEN) Latest ChangeSet: Thu Jan 21 11:27:11 2010 +0000 20836:cec57fd4565e
(XEN) Command line: dom0_mem=512M com1=115200,8n1 console=com1 loglvl=all loglvl_guest=all iommu_inclusive_mapping=1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) EDID info not retrieved because of reasons unknown
(XEN) Disc information:
(XEN) Found 0 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009e800 (usable)
(XEN) 000000000009e800 - 00000000000a0000 (reserved)
(XEN) 00000000000e4000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000007ee70000 (usable)
(XEN) 000000007ee70000 - 000000007ee7e000 (ACPI data)
(XEN) 000000007ee7e000 - 000000007eed0000 (ACPI NVS)
(XEN) 000000007eed0000 - 000000007ef00000 (reserved)
(XEN) 00000000fed00000 - 00000000fed01100 (reserved)
(XEN) 00000000fed02000 - 00000000fed14c00 (reserved)
(XEN) 00000000fed20000 - 00000000fed40000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ffe00000 - 0000000100000000 (reserved)
(XEN) System RAM: 1999MB (2047104kB)
(XEN) ACPI: RSDP 000FB080, 0024 (r2 ACPIAM)
(XEN) ACPI: XSDT 7EE70100, 0064 (r1 A_M_I_ OEMXSDT 5000927 MSFT 97)
(XEN) ACPI: FACP 7EE70290, 00F4 (r3 A_M_I_ OEMFACP 5000927 MSFT 97)
(XEN) ACPI: DSDT 7EE70440, 841F (r1 A1065 A1065000 0 INTL 20060113)
(XEN) ACPI: FACS 7EE7E000, 0040
(XEN) ACPI: APIC 7EE70390, 006C (r1 A_M_I_ OEMAPIC 5000927 MSFT 97)
(XEN) ACPI: MCFG 7EE70400, 003C (r1 A_M_I_ OEMMCFG 5000927 MSFT 97)
(XEN) ACPI: OEMB 7EE7E040, 0089 (r1 A_M_I_ AMI_OEM 5000927 MSFT 97)
(XEN) ACPI: HPET 7EE78860, 0038 (r1 A_M_I_ OEMHPET 5000927 MSFT 97)
(XEN) ACPI: GSCI 7EE7E0D0, 2024 (r1 A_M_I_ GMCHSCI 5000927 MSFT 97)
(XEN) ACPI: DMAR 7EE80100, 0138 (r1 AMI OEMDMAR 1 MSFT 97)
(XEN) ACPI: SSDT 7EE811B0, 0A7C (r1 DpgPmm CpuPm 12 INTL 20060113)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-000000007ee70000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[7ee7e00c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
(XEN) Processor #2 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
(XEN) Processor #3 7:7 APIC version 20
(XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) [VT-D]dmar.c:586: Host address width 36
(XEN) [VT-D]dmar.c:595: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:374: dmaru->address = fed90000
(XEN) [VT-D]dmar.c:326: endpoint: 0:1b.0
(XEN) [VT-D]dmar.c:595: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:374: dmaru->address = fed92000
(XEN) [VT-D]dmar.c:326: endpoint: 0:3.0
(XEN) [VT-D]dmar.c:595: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:374: dmaru->address = fed93000
(XEN) [VT-D]dmar.c:386: flags: INCLUDE_ALL
(XEN) [VT-D]dmar.c:599: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.1
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.2
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.7
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.1
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.2
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.7
(XEN) [VT-D]dmar.c:490: RMRR region: base_addr ed000 end_address effff
(XEN) [VT-D]dmar.c:599: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:425: RMRR address range not in reserved memory base = 7f000000 end = 7effffff; iommu_inclusive_mapp
ing=1 parameter may be needed.
(XEN) [VT-D]dmar.c:599: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.1
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.2
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.7
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.1
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.2
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.7
(XEN) [VT-D]dmar.c:490: RMRR region: base_addr 7eee0000 end_address 7eeeffff
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: Not using MMCONFIG.
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2666.419 MHz processor.
(XEN) Initing memory sharing.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 3072K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs disabled.
(XEN) HVM: VMX enabled
(XEN) xsave_init: cpu0: cntxt_max_size: 0x240 and states: 00000000:00000003
(XEN) xsave_init: using cntxt_size: 0x240 and states: 00000000:00000003
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU0 has no CMCI support
(XEN) [VT-D]iommu.c:1062: drhd->address = fed92000
(XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff57000
(XEN) [VT-D]iommu.c:1062: drhd->address = fed90000
(XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff56000
(XEN) [VT-D]iommu.c:1062: drhd->address = fed93000
(XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff55000
(XEN) Intel VT-d Snoop Control not supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation not supported.
(XEN) Intel VT-d Interrupt Remapping not supported.
(XEN) I/O virtualisation enabled
(XEN) I/O virtualisation for PV guests disabled
(XEN) CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
(XEN) Booting processor 1/1 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 3072K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) HVM: ASIDs disabled.
(XEN) xsave_init: cpu1: cntxt_max_size: 0x240 and states: 00000000:00000003
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU1 has no CMCI support
(XEN) CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
(XEN) Booting processor 2/2 eip 8c000
(XEN) Initializing CPU#2
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 3072K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 2
(XEN) HVM: ASIDs disabled.
(XEN) xsave_init: cpu2: cntxt_max_size: 0x240 and states: 00000000:00000003
(XEN) Intel machine check reporting enabled on CPU#2.
(XEN) CPU2: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU2 has no CMCI support
(XEN) CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
(XEN) Booting processor 3/3 eip 8c000
(XEN) Initializing CPU#3
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 3072K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 3
(XEN) HVM: ASIDs disabled.
(XEN) xsave_init: cpu3: cntxt_max_size: 0x240 and states: 00000000:00000003
(XEN) Intel machine check reporting enabled on CPU#3.
(XEN) CPU3: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU3 has no CMCI support
(XEN) CPU3: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 4 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) Brought up 4 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
(XEN) HPET: 8 timers in total, 8 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) [VT-D]iommc:1306:d32767 doin_context_mappi:PCI: bdf = 0:0.
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:0.0: no extended config
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1.0: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:3.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:3.0: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:19.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:19.0: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1a.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.0: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1a.1
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.1: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1a.2
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.2: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1a.7
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.7: no extended config
(XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 0:1b.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1b.0: no extended config
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1c.0: no extended config
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1c.4: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.0: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.1
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.1: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.2
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.2: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.7
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.7: no extended config
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1e.0: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1f.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1f.0: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1f.2
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1f.2: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1f.3
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1f.3: no extended config
(XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 1:0.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:1:0.0: no extended config
(XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 1:0.1
(XEN) [VT-D]mmconfig-shared.c:460: next cap:1:0.1: no extended config
(XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 2:0.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:2:0.0: no extended config
(XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 4:3.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:4:3.0: no extended config
(XEN) [VT-D]iommu.c:684: iommu_enable_translation: iommu->reg = ffff82c3fff57000
(XEN) [VT-D]iommu.c:684: iommu_enable_translation: iommu->reg = ffff82c3fff56000
(XEN) [VT-D]iommu.c:684: iommu_enable_translation: iommu->reg = ffff82c3fff55000
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x90c000
(XEN) elf_parse_binary: phdr: paddr=0x190c000 memsz=0x121fb8
(XEN) elf_parse_binary: phdr: paddr=0x1a2e000 memsz=0x888
(XEN) elf_parse_binary: phdr: paddr=0x1a2f000 memsz=0x158e0
(XEN) elf_parse_binary: phdr: paddr=0x1a448e0 memsz=0x1b2720
(XEN) elf_parse_binary: memory: 0x1000000 -> 0x1bf7000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff81a44ae0
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
(XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xffffffff80000000
(XEN) elf_paddr_offset = 0x0
(XEN) virt_offset = 0xffffffff80000000
(XEN) virt_kstart = 0xffffffff81000000
(XEN) virt_kend = 0xffffffff81bf7000
(XEN) virt_entry = 0xffffffff81a44ae0
(XEN) p2m_base = 0xffffffffffffffff
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1bf7000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000074000000->0000000078000000 (114688 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81bf7000
(XEN) Init. ramdisk: ffffffff81bf7000->ffffffff822a6a00
(XEN) Phys-Mach map: ffffffff822a7000->ffffffff823a7000
(XEN) Start info: ffffffff823a7000->ffffffff823a74b4
(XEN) Page tables: ffffffff823a8000->ffffffff823bf000
(XEN) Boot stack: ffffffff823bf000->ffffffff823c0000
(XEN) TOTAL: ffffffff80000000->ffffffff82800000
(XEN) ENTRY ADDRESS: ffffffff81a44ae0
(XEN) Dom0 has maximum 4 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff8190c000
(XEN) elf_load_binary: phdr 1 at 0xffffffff8190c000 -> 0xffffffff81a2dfb8
(XEN) elf_load_binary: phdr 2 at 0xffffffff81a2e000 -> 0xffffffff81a2e888
(XEN) elf_load_binary: phdr 3 at 0xffffffff81a2f000 -> 0xffffffff81a448e0
(XEN) elf_load_binary: phdr 4 at 0xffffffff81a448e0 -> 0xffffffff81aca000
(XEN) Scrubbing Free RAM: ..............done.
(XEN) Xen trace buffers: disabled
(XEN) tmem: initialized comp=0 global-lock=0
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 156kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31.6 (root@xentest) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #3 SMP Thu Jan 21 10:04:50
CET 2010
[ 0.000000] Command line: root=/dev/sda1 ro earlyprintk=xen console=hvc0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] xen_release_chunk: looking at area pfn 20000-7ee70
[ 0.000000] xen_release_chunk: looking at area pfn 7ef00-fec00
[ 0.000000] xen_release_chunk: looking at area pfn fec01-fed00
[ 0.000000] xen_release_chunk: looking at area pfn fed15-fed20
[ 0.000000] xen_release_chunk: looking at area pfn fed40-fee00
[ 0.000000] xen_release_chunk: looking at area pfn fee01-ffe00
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] Xen: 000000000009e800 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] Xen: 000000007ee70000 - 000000007ee7e000 (ACPI data)
[ 0.000000] Xen: 000000007ee7e000 - 000000007eed0000 (ACPI NVS)
[ 0.000000] Xen: 000000007eed0000 - 000000007ef00000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] Xen: 00000000fed00000 - 00000000fed01100 (reserved)
[ 0.000000] Xen: 00000000fed02000 - 00000000fed14c00 (reserved)
[ 0.000000] Xen: 00000000fed20000 - 00000000fed40000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] console [xenboot0] enabled
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009e800 (usable)
[ 0.000000] modified: 000000000009e800 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] modified: 000000007ee70000 - 000000007ee7e000 (ACPI data)
[ 0.000000] modified: 000000007ee7e000 - 000000007eed0000 (ACPI NVS)
[ 0.000000] modified: 000000007eed0000 - 000000007ef00000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed01100 (reserved)
[ 0.000000] modified: 00000000fed02000 - 00000000fed14c00 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000fed40000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000
[ 0.000000] RAMDISK: 01bf7000 - 022a6a00
[ 0.000000] ACPI: RSDP 00000000000fb080 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 000000007ee70100 00064 (v01 A_M_I_ OEMXSDT 05000927 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ee70290 000F4 (v03 A_M_I_ OEMFACP 05000927 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ee70440 0841F (v01 A1065 A1065000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 000000007ee7e000 00040
[ 0.000000] ACPI: APIC 000000007ee70390 0006C (v01 A_M_I_ OEMAPIC 05000927 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ee70400 0003C (v01 A_M_I_ OEMMCFG 05000927 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007ee7e040 00089 (v01 A_M_I_ AMI_OEM 05000927 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007ee78860 00038 (v01 A_M_I_ OEMHPET 05000927 MSFT 00000097)
[ 0.000000] ACPI: GSCI 000000007ee7e0d0 02024 (v01 A_M_I_ GMCHSCI 05000927 MSFT 00000097)
[ 0.000000] ACPI: 000000007ee80100 00138 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000007ee811b0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0020000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [00023a8000 - 00023bf000] XEN PAGETABLES ==> [00023a8000 - 00023bf000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001bd66f4] TEXT DATA BSS ==> [0001000000 - 0001bd66f4]
[ 0.000000] #4 [0001bf7000 - 00022a6a00] RAMDISK ==> [0001bf7000 - 00022a6a00]
[ 0.000000] #5 [00022a7000 - 00023a8000] XEN START INFO ==> [00022a7000 - 00023a8000]
[ 0.000000] #6 [0001bd7000 - 0001bd7298] BRK ==> [0001bd7000 - 0001bd7298]
[ 0.000000] #7 [0000100000 - 00001e8000] PGTABLE ==> [0000100000 - 00001e8000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=0, irq=0
(XEN) ioapic_guest_write: new_entry=00010900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=2, irq=0
(XEN) ioapic_guest_write: new_entry=00010900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) irq.c:1431: dom0: pirq 0 or irq 3 already mapped
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=4, irq=4
(XEN) ioapic_guest_write: new_entry=00010900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) irq.c:1431: dom0: pirq 0 or irq 5 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 6 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 7 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 8 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 9 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 10 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 11 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 12 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 13 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 14 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 15 already mapped
(XEN) allocated vector for irq:16
(XEN) irq.c:1431: dom0: pirq 0 or irq 16 already mapped
(XEN) allocated vector for irq:17
(XEN) irq.c:1431: dom0: pirq 0 or irq 17 already mapped
(XEN) allocated vector for irq:18
(XEN) irq.c:1431: dom0: pirq 0 or irq 18 already mapped
(XEN) allocated vector for irq:19
(XEN) irq.c:1431: dom0: pirq 0 or irq 19 already mapped
(XEN) allocated vector for irq:20
(XEN) irq.c:1431: dom0: pirq 0 or irq 20 already mapped
(XEN) allocated vector for irq:21
(XEN) irq.c:1431: dom0: pirq 0 or irq 21 already mapped
(XEN) allocated vector for irq:22
(XEN) irq.c:1431: dom0: pirq 0 or irq 22 already mapped
(XEN) allocated vector for irq:23
(XEN) irq.c:1431: dom0: pirq 0 or irq 23 already mapped
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ef00000 (gap: 7ef00000:7fd00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Allocated 22 4k pages, static data 88288 bytes
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128931
[ 0.000000] Kernel command line: root=/dev/sda1 ro earlyprintk=xen console=hvc0
[ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB)
[ 0.000000] Placing 64MB Xen software IO TLB between ffff880002ec0000 - ffff880006ec0000
[ 0.000000] Xen software IO TLB at phys 0x2ec0000 - 0x6ec0000
[ 0.000000] Memory: 427780k/524288k available (6256k kernel code, 456k absent, 95356k reserved, 4167k data, 568k init
)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=0, irq=0
(XEN) ioapic_guest_write: new_entry=00000900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[ 0.000000] xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=4, irq=4
(XEN) ioapic_guest_write: new_entry=00000904
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[ 0.000000] xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9 triggering 1 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin 10 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin 11 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin 14 triggering 0 polarity 0
[ 0.000000] xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin 15 triggering 0 polarity 0
[ 0.000000] Detected 2666.418 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console handover: boot [xenboot0] -> real [hvc0]
[ 0.000999] installing Xen timer for CPU 0
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.83 BogoMIPS (lpj=2666418)
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Initializing.
[ 0.000999] Mount-cache hash table entries: 256
[ 0.000999] Initializing cgroup subsys ns
[ 0.000999] Initializing cgroup subsys cpuacct
[ 0.000999] Initializing cgroup subsys freezer
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 3072K
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 0
[ 0.000999] mce: CPU supports 6 MCE banks
[ 0.000999] Performance Counters: unsupported p6 CPU model 23 no PMU driver, software counters only.
[ 0.000999] SMP alternatives: switching to UP code
[ 0.001256] ACPI: Core revision 20090521
[ 0.014695] installing Xen timer for CPU 1
[ 0.014739] SMP alternatives: switching to SMP code
[ 0.000008] Initializing CPU#1
[ 0.000046] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000048] CPU: L2 cache: 3072K
[ 0.000051] CPU: Physical Processor ID: 0
[ 0.000053] CPU: Processor Core ID: 1
[ 0.000055] mce: CPU supports 6 MCE banks
[ 0.015157] installing Xen timer for CPU 2
[ 0.000018] Initializing CPU#2
[ 0.000071] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000073] CPU: L2 cache: 3072K
[ 0.000076] CPU: Physical Processor ID: 0
[ 0.000078] CPU: Processor Core ID: 2
[ 0.000081] mce: CPU supports 6 MCE banks
[ 0.015412] installing Xen timer for CPU 3
[ 0.000008] Initializing CPU#3
[ 0.000044] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000046] CPU: L2 cache: 3072K
[ 0.000050] CPU: Physical Processor ID: 0
[ 0.000051] CPU: Processor Core ID: 3
[ 0.000054] mce: CPU supports 6 MCE banks
[ 0.015581] Brought up 4 CPUs
[ 0.016158] Booting paravirtualized kernel on Xen
[ 0.016158] Xen version: 4.0.0-rc2-pre (preserve-AD) (dom0)
[ 0.016158] Grant tables using version 2 layout.
[ 0.016158] Grant table initialized
[ 0.016158] Time: 7:58:55 Date: 01/25/10
[ 0.016158] NET: Registered protocol family 16
[ 0.016185] xenbus_probe_init ok
[ 0.017032] ACPI: bus type pci registered
[ 0.017057] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.017057] PCI: Not using MMCONFIG.
[ 0.0057] PCI: Using configuration type 1 for base access
[ 0.029231] bio: create slab <bio-0> at 0
[ 0.046830] ACPI: Interpreter enabled
[ 0.046840] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.046880] ACPI: Using IOAPIC for interrupt routing
[ 0.046941] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.050434] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.099984] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.113155] ACPI Warning: Incorrect checksum in table [OEMB] - 93, should be 8A 20090521 tbutils-246
[ 0.114151] ACPI Warning: Incorrect checksum in table [ ] - 96, should be DA 20090521 tbutils-246
[ 0.114356] ACPI: No dock devices found.
[ 0.114541] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.114596] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.114596] pci 0000:00:01.0: PME# disabled
[ 0.114596] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.114596] pci 0000:00:03.0: PME# disabled
[ 0.115213] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.115222] pci 0000:00:19.0: PME# disabled
[ 0.115857] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.115866] pci 0000:00:1a.7: PME# disabled
[ 0.115982] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.115982] pci 0000:00:1b.0: PME# disabled
[ 0.116087] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.116095] pci 0000:00:1c.0: PME# disabled
[ 0.116223] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.116231] pci 0000:00:1c.4: PME# disabled
[ 0.116875] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.116884] pci 0000:00:1d.7: PME# disabled
[ 0.117205] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.117213] pci 0000:00:1f.2: PME# disabled
[ 0.117982] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.117982] pci 0000:02:00.0: PME# disabled
[ 0.118238] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.118247] pci 0000:04:03.0: PME# disabled
[ 0.118335] pci 0000:00:1e.0: transparent bridge
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:03.0
(XEN) PCI add device 00:19.0
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1a.1
(XEN) PCI add device 00:1a.2
(XEN) PCI add device 00:1a.7
(XEN) PCI add device 00:1b.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.4
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) PCI add device 00:1d.2
(XEN) PCI add device 00:1d.7
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 01:00.0
(XEN) PCI add device 01:00.1
(XEN) PCI add device 02:00.0
(XEN) PCI add device 04:03.0
[ 0.142083] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.142228] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.142370] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.143099] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.143241] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.143383] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.143529] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.143677] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.144036] xenbus_probe_backend_init bus registered ok
[ 0.144036] xenbus_probe_frontend_init bus registered ok
[ 0.144036] xen_balloon: Initialising balloon driver with page order 0.
[ 0.144095] SCSI subsystem initialized
[ 0.145034] usbcore: registered new interface driver usbfs
[ 0.145034] usbcore: registered new interface driver hub
[ 0.145034] usbcore: registered new device driver usb
[ 0.145034] PCI: Using ACPI for IRQ routing
[ 0.145126] IO APIC resources couldn't be allocated.
[ 0.164041] cfg80211: Using static regulatory domain info
[ 0.164041] cfg80211: Regulatory domain: US
[ 0.164041] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.164041] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.164041] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.164041] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.164041] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.164041] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.164041] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.164051] cfg80211: Calling CRDA for country: US
[ 0.164079] NetLabel: Initializing
[ 0.164079] NetLabel: domain hash size = 128
[ 0.164079] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.164079] NetLabel: unlabeled traffic allowed by default
[ 0.171022] pnp: PnP ACPI init
[ 0.171038] ACPI: bus type pnp registered
[ 0.171614] xen_allocate_pirq: returning irq 8 for gsi 8
[ 0.171622] xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0
[ 0.171796] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.171803] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0
[ 0.172604] xen_allocate_pirq: returning irq 6 for gsi 6
[ 0.172611] xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0
[ 0.174604] xen_allocate_pirq: returning irq 4 for gsi 4
[ 0.174611] xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=4, irq=4
(XEN) ioapic_guest_write: new_entry=00000904
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[ 0.175041] xen_allocate_pirq: returning irq 1 for gsi 1
[ 0.175048] xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0
[ 0.175240] xen_allocate_pirq: returning irq 12 for gsi 12
[ 0.175247] xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0
[ 0.176541] pnp: PnP ACPI: found 18 devices
[ 0.176546] ACPI: ACPI bus type pnp unregistered
[ 0.176558] system 00:01: iomem ra[ 1.037088] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.047454] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 1.353087] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.669140] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.985140] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.301141] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.312227] Freeing unused kernel memory: 568k freed
[ 2.312413] Write protecting the kernel read-only data: 9228k
Loading, please wait...
Couldnt get a file descriptor referring to the console
KDGKBMODE: Bad file descriptor
loadkeys: error reading keyboard mode
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... kinit: name_to_dev_t(/dev/sda5) = dev(8,5)
kinit: trying to resume from /dev/sda5
[ 3.012833] PM: Starting manual resume from disk
kinit: No resume image, doing normal boot...
resume: libgcrypt version: 1.4.1
done.
[ 3.083339] kjournald starting. Commit interval 5 seconds
[ 3.083368] EXT3-fs: mounted filesystem with writeback data mode.
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
SELinux: Could not open policy file <= /etc/selinux/targeted/policy/policy.24: No such file or directory
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd[ 4.553991] udevd version 125 started
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...done.
Setting the system clock.
Activating swap...[ 6.979264] Adding 3229024k swap on /dev/sda5. Priority:-1 extents:1 across:3229024k
done.
Checking root file system...fsck 1.41.3 (12-Oct-2008)
/dev/sda1: clean, 1168912/4685824 files, 12405005/18729774 blocks
done.
[ 7.243893] EXT3 FS on sda1, internal journal
Setting the system clock.
Cleaning up ifupdown....
Loading kernel modules...done.
Checking file systems...fsck 1.41.3 (12-Oct-2008)
done.
Setting kernel variables (/etc/sysctl.conf)...done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...done.
Initializing IP Masquerading...done.
Loading IP Masquerade kernel modules...done.
Setting sensors limits[ 9.897393] ADDRCONF(NETDEV_UP): eth1: link is not ready
.
Setting console screen modes and fonts.
INIT: Entering runlevel: 2
Starting enhanced syslogd: rsyslogd.
Starting ACPI services....
Starting system message bus: dbus.
[ 11.596951] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 11.596965] 0000:00:19.0: eth1: 10/100 speed: disabling TSO
[ 11.597100] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Starting OpenBSD Secure Shell server: sshd.
Starting MTA: exim4.
Your system does not have the CPU extensions required to use KVM. Not doing anything. failed!
Setting sysfs variables....
RTNETLINK answers: File exists
[ 16.359849] xenbus_probe wake_waiting
[ 16.359875] xenbus_probe wake_waiting
[ 16.360196] XENBUS: Unable to read cpu state
[ 16.360405] XENBUS: Unable to read cpu state
[ 16.360556] XENBUS: Unable to read cpu state
[ 16.360705] XENBUS: Unable to read cpu state
[ 16.360968] xenbus_probe_devices backend
[ 16.361147] xenbus_probe_devices failed xenbus_directory
[ 16.361153] backend_probe_and_watch devices probed ok
[ 16.362268] backend_probe_and_watch watch add ok ok
[ 16.362275] backend_probe_and_watch all done
[ 16.362281] xenbus_probe_devices device
[ 16.362423] xenbus_probe_devices failed xenbus_directory
[ 16.362428] frontend_probe_and_watch devices probed ok
[ 16.362556] frontend_probe_and_watch watch add ok ok
[ 16.362561] frontend_probe_and_watch all done
RTNETLINK answers: File exists
Restoring Xen domains: linhvm
An error occurred while restoring domain linhvm:
Error: not a valid guest state file: config size read
!
winhvm
An error occurred while restoring domain winhvm:
Error: not a valid guest state file: config size read
!
[done].
Starting Hardware abstraction layer: hald.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: crond.
Debian GNU/Linux 5.0 xentest hvc0
xentest login:
[-- Attachment #5: xm-info-vtd.txt --]
[-- Type: text/plain, Size: 1369 bytes --]
host : xentest
release : 2.6.31.6
version : #3 SMP Thu Jan 21 10:04:50 CET 2010
machine : x86_64
nr_cpus : 4
nr_nodes : 1
cores_per_socket : 4
threads_per_core : 1
cpu_mhz : 2666
hw_caps : bfebfbff:20100800:00000000:00000940:0408e3fd:00000000:00000001:00000000
virt_caps : hvm hvm_directio
total_memory : 1999
free_memory : 1482
node_to_cpu : node0:0-3
node_to_memory : node0:1482
node_to_dma32_mem : node0:1482
max_node_id : 0
xen_major : 4
xen_minor : 0
xen_extra : .0-rc2-pre
xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64
xen_scheduler : credit
xen_pagesize : 4096
platform_params : virt_start=0xffff800000000000
xen_changeset : Thu Jan 21 11:27:11 2010 +0000 20836:cec57fd4565e
xen_commandline : dom0_mem=512M com1=115200,8n1 console=com1 loglvl=all loglvl_guest=all iommu_inclusive_mapping=1
cc_compiler : gcc version 4.3.2 (Debian 4.3.2-1.1)
cc_compile_by : root
cc_compile_domain :
cc_compile_date : Thu Jan 21 08:45:35 CET 2010
xend_config_format : 4
[-- Attachment #6: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: collecting info on platforms with VT-d BIOS problems / Supermicro X7SB4
2010-01-23 0:22 collecting info on platforms with VT-d BIOS problems Kay, Allen M
` (4 preceding siblings ...)
2010-01-25 16:26 ` Sander Eikelenboom
@ 2010-03-29 7:20 ` Pasi Kärkkäinen
5 siblings, 0 replies; 12+ messages in thread
From: Pasi Kärkkäinen @ 2010-03-29 7:20 UTC (permalink / raw)
To: Kay, Allen M; +Cc: 'xen-devel@lists.xensource.com', Han, Weidong
On Fri, Jan 22, 2010 at 04:22:08PM -0800, Kay, Allen M wrote:
> We would like to collect information on platforms that have problem with VT-d PCI device passthrough using non-IGD PCI devices. Note that IGD (integrated display device) device passthrough code is still being worked on.
>
> If you have encountered VT-d problems on a particular platform using latest xen-unstable, please provide the following information so that we can work with OEM's to get their BIOS's fixed:
>
> (a) Platform details (OEM, Product/Model#, Other identifying info)
> (b) BIOS version/number
> (c) Version of Xen with which failure is seen (if not the latest xen-unstable)
> (d) Specific error/failure details such as serial log
>
> Thanks!
>
I have a Supermicro motherboard with broken BIOS regarding VT-d ACPI DMAR tables.
See this thread for more information: http://lists.xensource.com/archives/html/xen-devel/2010-03/msg01477.html
Model: Supermicro X7SB4
BIOS: Version 1.2a (latest available)
Xen: 4.0.0-rc8 (latest xen-unstable)
Errors: (XEN) [VT-D]dmar.c:371: Invalid ACPI DMAR entry length: 0x0
More information about the error here: http://lists.xensource.com/archives/html/xen-devel/2010-03/msg01476.html
-- Pasi
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: collecting info on platforms with VT-d BIOS problems
@ 2010-01-29 1:26 Mark Hurenkamp
0 siblings, 0 replies; 12+ messages in thread
From: Mark Hurenkamp @ 2010-01-29 1:26 UTC (permalink / raw)
To: xen-devel
Hi,
I own an Asus P7P55D-EVO board, which has vtx and vt-d features in the
BIOS (i'm running the latest firmware 1207), however for me this
platform won't boot with iommu enabled.
Here I've included a failing boot log (iommu=1), and a lspci output
for a working boot (with iommu=0).
Let me know if there's other info you would like to see of this system.
I'd love to run this with the tuner cards in one hvm, and the graphics
card in another hvm...
Latest xen (from xen-unstable) shows the following when i boot:
__ __ _ _ ___ ___ _____
\ \/ /___ _ __ | || | / _ \ / _ \ _ __ ___|___ / _ __ _ __
___
\ // _ \ '_ \ | || |_| | | | | | |__| '__/ __| |_ \ __| '_ \|
'__/ _ \
/ \ __/ | | | |__ _| |_| | |_| |__| | | (__ ___) |__| |_) | |
| __/
/_/\_\___|_| |_| |_|(_)___(_)___/ |_| \___|____/ | .__/|_|
\___|
|_|
(XEN) Xen version 4.0.0-rc3-pre (root@karpeer.net) (gcc version 4.4.1
(Ubuntu 4.4.1-4ubuntu8) ) Thu Jan 28 22:50:42 CET 2010
(XEN) Latest ChangeSet: Tue Jan 26 15:54:40 2010 +0000
20858:2636e5619708
(XEN) Command line: com1=112500,8n1 console=com1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 000000000009fc00 - 00000000000a0000 (reserved)
(XEN) 00000000000e4000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bf670000 (usable)
(XEN) 00000000bf670000 - 00000000bf688000 (ACPI data)
(XEN) 00000000bf688000 - 00000000bf6dc000 (ACPI NVS)
(XEN) 00000000bf6dc000 - 00000000bf700000 (reserved)
(XEN) 00000000bf800000 - 00000000c0000000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ffe00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000140000000 (usable)
(XEN) ACPI: RSDP 000FB470, 0024 (r2 ACPIAM)
(XEN) ACPI: XSDT BF670100, 006C (r1 120709 XSDT1509 20091207
MSFT 97)
(XEN) ACPI: FACP BF670290, 00F4 (r3 120709 FACP1509 20091207
MSFT 97)
(XEN) ACPI: DSDT BF6704A0, EF14 (r1 A1290 A1290001 1 INTL
20060113)
(XEN) ACPI: FACS BF688000, 0040
(XEN) ACPI: APIC BF670390, 00CC (r1 120709 APIC1509 20091207
MSFT 97)
(XEN) ACPI: MCFG BF670460, 003C (r1 120709 OEMMCFG 20091207
MSFT 97)
(XEN) ACPI: OEMB BF688040, 0072 (r1 120709 OEMB1509 20091207
MSFT 97)
(XEN) ACPI: HPET BF67F7A0, 0038 (r1 120709 OEMHPET 20091207
MSFT 97)
(XEN) ACPI: DMAR BF6880C0, 0090 (r1 AMI OEMDMAR 1
MSFT 97)
(XEN) ACPI: ASPT BF67FA40, 0034 (r6 120709 PerfTune 20091207
MSFT 97)
(XEN) ACPI: OSFR BF67FA80, 00B0 (r1 120709 OEMOSFR 20091207
MSFT 97)
(XEN) ACPI: SSDT BF689760, 0363 (r1 DpgPmm CpuPm 12 INTL
20060113)
(XEN) System RAM: 3836MB (3929012kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000140000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000ff780
(XEN) DMI 2.6 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[bf68800c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
(XEN) ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) [VT-D]dmar.c:631: Host address width 36
(XEN) [VT-D]dmar.c:640: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:374: dmaru->address = fed90000
(XEN) [VT-D]dmar.c:386: flags: INCLUDE_ALL
(XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:535: RMRR region: base_addr e4000 end_address e7fff
(XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:535: RMRR region: base_addr bf6ec000 end_address
bf6fffff
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: Not using MMCONFIG.
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2675.032 MHz processor.
(XEN) Initing memory sharing.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Thermal monitoring enabled (TM1)
(XEN) [VT-D]iommu.c:1062: drhd->address = fed90000
(XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff57000
(XEN) Intel VT-d Snoop Control supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation supported.
(XEN) Intel VT-d Interrupt Remapping supported.
(XEN) ----[ Xen-4.0.0-rc3-pre x86_64 debug=y Not tainted ]----
(XEN) CPU: 0
(XEN) RIP: e008:[<ffff82c480139897>] clear_fault_bits+0x40/0xdd
(XEN) RFLAGS: 0000000000010002 CONTEXT: hypervisor
(XEN) rax: 0000000000000282 rbx: ffff83013fff3e10 rcx:
ffff82c3fff5700c
(XEN) rdx: ffff82c3fff57000 rsi: ffff82c3fff5aff8 rdi:
ffff82c3fff57008
(XEN) rbp: ffff82c4802efd88 rsp: ffff82c4802efd78 r8:
ffffffff00000000
(XEN) r9: 0000000000000004 r10: 0000000000000000 r11:
0000000000000040
(XEN) r12: ffff83013fff3e48 r13: 0000000000000018 r14:
0000000000000018
(XEN) r15: ffff82c48013a015 cr0: 000000008005003b cr4:
00000000000026f0
(XEN) cr3: 00000000bf4f4000 cr2: ffff82c3fff5aff8
(XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008
(XEN) Xen stack trace from rsp=ffff82c4802efd78:
(XEN) ffff83013fff3e10 ffff83013fff3560 ffff82c4802efde8
ffff82c48013aa32
(XEN) ffff82c4802efdb8 0000001800000010 00000000000000c0
0000000000000c00
(XEN) ffff82c4802efde8 ffff83013fff3e10 ffff82c4802388f0
ffff82c4802efe00
(XEN) 0000000000040000 ffff82c480238920 ffff82c4802efe38
ffff82c48013b698
(XEN) ffff83013fff3d80 000000000000001f ffff82c480264298
00000000ffffffed
(XEN) 0000000000000040 ffff83000008bfc0 ffff83000008bf70
ffff82c480264000
(XEN) ffff82c4802efe58 ffff82c4801377d5 0000000000000040
ffff82c4802eff28
(XEN) ffff82c4802eff18 ffff82c4802554b3 0000000000000000
0000000000000000
(XEN) 000000000f65f5c0 ffff8300bf4f5ff8 ffff83000008bfc0
0000100000000000
(XEN) ffff83000008bf70 ffff83000008bf70 0000000000000000
0000000001086001
(XEN) 000000000000000f 00000000000efced 0000000800000000
000000010000006e
(XEN) 0000000000000003 00000000000002f8 0000000000000000
0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000
0000000000000000
(XEN) 0000000000067e2c ffff82c4801000b5 0000000000000000
0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000
0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000
0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000
0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000
0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000
0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000
0000000000000000
(XEN) Xen call trace:
(XEN) [<ffff82c480139897>] clear_fault_bits+0x40/0xdd
(XEN) [<ffff82c48013aa32>] init_vtd_hw+0x17b/0x3eb
(XEN) [<ffff82c48013b698>] intel_vtd_setup+0x572/0x65c
(XEN) [<ffff82c4801377d5>] iommu_setup+0x35/0xf2
(XEN) [<ffff82c4802554b3>] __start_xen+0x2028/0x23e5
(XEN)
(XEN) Pagetable walk from ffff82c3fff5aff8:
(XEN) L4[0x105] = 00000000bf4fa027 5555555555555555
(XEN) L3[0x10f] = 00000000bf66f063 5555555555555555
(XEN) L2[0x1ff] = 00000000bf66e063 5555555555555555
(XEN) L1[0x15a] = 0000000000000000 ffffffffffffffff
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) FATAL PAGE FAULT
(XEN) [error_code=0000]
(XEN) Faulting linear address: ffff82c3fff5aff8
(XEN) ****************************************
(XEN)
(XEN) Reboot in five seconds...
Lspci after booting with iommu=0:
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] #00 [0000]
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root
Port 1 (rev 11)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fba00000-fbafffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 8383
Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit-
Queue=0/1 Enable+
Address: fee0f00c Data: 4159
Masking: 00000003 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0
<512ns, L1 <4us
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+
BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 1, PowerLimit 75.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot
+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [150] Access Controls <?>
Capabilities: [160] Vendor Specific Information <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:08.0 System peripheral: Intel Corporation Core Processor System
Management Registers (rev 11)
Subsystem: Device 0043:0083
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI
00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0
unlimited, L1 unlimited
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [100] Vendor Specific Information <?>
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore
and Scratchpad Registers (rev 11)
Subsystem: Device 0043:0083
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI
00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0
unlimited, L1 unlimited
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [100] Vendor Specific Information <?>
00:08.2 System peripheral: Intel Corporation Core Processor System
Control and Status Registers (rev 11)
Subsystem: Device 0043:0083
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI
00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0
unlimited, L1 unlimited
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [100] Vendor Specific Information <?>
00:08.3 System peripheral: Intel Corporation Core Processor
Miscellaneous Registers (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link
(rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.1 System peripheral: Intel Corporation Core Processor QPI
Routing and Protocol Registers (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller (rev 05) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fb9fe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot
+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset
High Definition Audio (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 8375
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fb9f8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot
+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI
00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0
<64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive-
BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 1 (rev 05)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<1us, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 80, PowerLimit 25.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Address: fee0f00c Data: 4161
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8383
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot
+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 5 (rev 05)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<1us, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 84, PowerLimit 25.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Address: fee0f00c Data: 4169
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8383
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot
+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 6 (rev 05)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fbc00000-fbdfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<1us, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 85, PowerLimit 10.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Address: fee0f00c Data: 4171
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8383
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot
+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 7 (rev 05)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #7, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<1us, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Address: fee0f00c Data: 4179
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8383
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot
+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.7 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 8 (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbb00000-fbbfffff
Prefetchable memory behind bridge: 00000000d3f00000-00000000d3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 87, PowerLimit 10.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Address: fee0f00c Data: 4181
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8383
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot
+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller (rev 05) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fb9fd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot
+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) (prog-
if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=08, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000d4000000-00000000dfffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device 8383
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface
Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset
4 port SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 21
Region 0: I/O ports at ac00 [size=8]
Region 1: I/O ports at a880 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a480 [size=4]
Region 4: I/O ports at a400 [size=16]
Region 5: I/O ports at a080 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCIe advanced features <?>
Kernel driver in use: ata_piix
Kernel modules: ata_generic, pata_acpi
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus
Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 15
Region 0: Memory at fb9fc000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ffe0 [size=32]
Kernel modules: i2c-i801
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset
2 port SATA IDE Controller (rev 05) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 21
Region 0: I/O ports at bc00 [size=8]
Region 1: I/O ports at b880 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at b480 [size=4]
Region 4: I/O ports at b400 [size=16]
Region 5: I/O ports at b080 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCIe advanced features <?>
Kernel driver in use: ata_piix
Kernel modules: ata_generic, pata_acpi
01:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon
HD 4350]
Subsystem: ASUSTeK Computer Inc. Device 032e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fbae0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at c000 [size=256]
Expansion ROM at fbac0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1
unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0
<64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100] Vendor Specific Information <?>
Kernel modules: radeon
01:00.1 Audio device: ATI Technologies Inc R700 Audio Device [Radeon
HD 4000 Series]
Subsystem: ASUSTeK Computer Inc. Device aa38
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fbafc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1
unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0
<64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100] Vendor Specific Information <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Subsystem: ASUSTeK Computer Inc. Device 83a3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 409
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at d3fff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d3ff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at fbbf0000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot
+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable+
Address: 00000000fee0100c Data: 4189
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1
<64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<512ns, L1 <64us
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [ac] MSI-X: Enable- Mask- TabSize=4
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data <?>
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: r8169
Kernel modules: r8169
04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885
PCI Video and Audio Decoder (rev 02)
Subsystem: Hauppauge computer works Inc. Device 8101
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbc00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<2us, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot
+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data <?>
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [200] Virtual Channel <?>
Kernel driver in use: cx23885
Kernel modules: cx23885
07:01.0 Multimedia video controller: Internext Compression Inc iTVC15
MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. Device 4000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ivtv
Kernel modules: ivtv
07:02.0 PCI bridge: Pericom Semiconductor PI7C8140A PCI-to-PCI Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Bus: primary=07, secondary=08, subordinate=08, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] CompactPCI hot-swap <?>
Kernel modules: shpchp
07:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
Subsystem: ASUSTeK Computer Inc. Device 820d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at fbeff000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at fbe00000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot
+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Vital Product Data <?>
Kernel driver in use: r8169
Kernel modules: r8169
08:08.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. Device e807
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at dc000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ivtv
Kernel modules: ivtv
08:09.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. Device e817
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ivtv
Kernel modules: ivtv
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: collecting info on platforms with VT-d BIOS problems
@ 2010-01-29 21:56 Mark Hurenkamp
0 siblings, 0 replies; 12+ messages in thread
From: Mark Hurenkamp @ 2010-01-29 21:56 UTC (permalink / raw)
To: xen-devel
Hi,
I've posted this earlier but didn't see it on the list, so i post again.
> If you have encountered VT-d problems on a particular platform using
latest xen-unstable,
> please provide the following information so that we can work with OEM's
to get their BIOS's
> fixed:
>
> (a) Platform details (OEM, Product/Model#, Other identifying info)
> (b) BIOS version/number
> (c) Version of Xen with which failure is seen (if not the latest
xen-unstable)
> (d) Specific error/failure details such as serial log
I own an Asus P7P55D-EVO board, which has vtx and vt-d features in the
BIOS (i'm running the latest firmware 1207), however for me this platform
won't boot with iommu enabled.
Here I've included a failing boot log (iommu=1), and a lspci output for a
working boot (with iommu=0).
Let me know if there's other info you would like to see of this system.
I'd love to run this with the tuner cards in one hvm, and the graphics
card in another hvm...
Recent xen (from xen-unstable) shows the following when i boot:
__ __ _ _ ___ ___ _____
\ \/ /___ _ __ | || | / _ \ / _ \ _ __ ___|___ / _ __ _ __ ___
\ // _ \ '_ \ | || |_| | | | | | |__| '__/ __| |_ \ __| '_ \| '__/ _ \
/ \ __/ | | | |__ _| |_| | |_| |__| | | (__ ___) |__| |_) | | | __/
/_/\_\___|_| |_| |_|(_)___(_)___/ |_| \___|____/ | .__/|_| \___|
|_|
(XEN) Xen version 4.0.0-rc3-pre (root@karpeer.net) (gcc version 4.4.1
(Ubuntu 4.4.1-4ubuntu8) ) Thu Jan 28 22:50:42 CET 2010
(XEN) Latest ChangeSet: Tue Jan 26 15:54:40 2010 +0000 20858:2636e5619708
(XEN) Command line: com1=112500,8n1 console=com1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 000000000009fc00 - 00000000000a0000 (reserved)
(XEN) 00000000000e4000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bf670000 (usable)
(XEN) 00000000bf670000 - 00000000bf688000 (ACPI data)
(XEN) 00000000bf688000 - 00000000bf6dc000 (ACPI NVS)
(XEN) 00000000bf6dc000 - 00000000bf700000 (reserved)
(XEN) 00000000bf800000 - 00000000c0000000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ffe00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000140000000 (usable)
(XEN) ACPI: RSDP 000FB470, 0024 (r2 ACPIAM)
(XEN) ACPI: XSDT BF670100, 006C (r1 120709 XSDT1509 20091207 MSFT 97)
(XEN) ACPI: FACP BF670290, 00F4 (r3 120709 FACP1509 20091207 MSFT 97)
(XEN) ACPI: DSDT BF6704A0, EF14 (r1 A1290 A1290001 1 INTL 20060113)
(XEN) ACPI: FACS BF688000, 0040
(XEN) ACPI: APIC BF670390, 00CC (r1 120709 APIC1509 20091207 MSFT 97)
(XEN) ACPI: MCFG BF670460, 003C (r1 120709 OEMMCFG 20091207 MSFT 97)
(XEN) ACPI: OEMB BF688040, 0072 (r1 120709 OEMB1509 20091207 MSFT 97)
(XEN) ACPI: HPET BF67F7A0, 0038 (r1 120709 OEMHPET 20091207 MSFT 97)
(XEN) ACPI: DMAR BF6880C0, 0090 (r1 AMI OEMDMAR 1 MSFT 97)
(XEN) ACPI: ASPT BF67FA40, 0034 (r6 120709 PerfTune 20091207 MSFT 97)
(XEN) ACPI: OSFR BF67FA80, 00B0 (r1 120709 OEMOSFR 20091207 MSFT 97)
(XEN) ACPI: SSDT BF689760, 0363 (r1 DpgPmm CpuPm 12 INTL 20060113)
(XEN) System RAM: 3836MB (3929012kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000140000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000ff780
(XEN) DMI 2.6 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[bf68800c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
(XEN) ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) [VT-D]dmar.c:631: Host address width 36
(XEN) [VT-D]dmar.c:640: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:374: dmaru->address = fed90000
(XEN) [VT-D]dmar.c:386: flags: INCLUDE_ALL
(XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:535: RMRR region: base_addr e4000 end_address e7fff
(XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:535: RMRR region: base_addr bf6ec000 end_address
bf6fffff
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: Not using MMCONFIG.
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2675.032 MHz processor.
(XEN) Initing memory sharing.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Thermal monitoring enabled (TM1)
(XEN) [VT-D]iommu.c:1062: drhd->address = fed90000
(XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff57000
(XEN) Intel VT-d Snoop Control supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation supported.
(XEN) Intel VT-d Interrupt Remapping supported.
(XEN) ----[ Xen-4.0.0-rc3-pre x86_64 debug=y Not tainted ]----
(XEN) CPU: 0
(XEN) RIP: e008:[<ffff82c480139897>] clear_fault_bits+0x40/0xdd
(XEN) RFLAGS: 0000000000010002 CONTEXT: hypervisor
(XEN) rax: 0000000000000282 rbx: ffff83013fff3e10 rcx: ffff82c3fff5700c
(XEN) rdx: ffff82c3fff57000 rsi: ffff82c3fff5aff8 rdi: ffff82c3fff57008
(XEN) rbp: ffff82c4802efd88 rsp: ffff82c4802efd78 r8: ffffffff00000000
(XEN) r9: 0000000000000004 r10: 0000000000000000 r11: 0000000000000040
(XEN) r12: ffff83013fff3e48 r13: 0000000000000018 r14: 0000000000000018
(XEN) r15: ffff82c48013a015 cr0: 000000008005003b cr4: 00000000000026f0
(XEN) cr3: 00000000bf4f4000 cr2: ffff82c3fff5aff8
(XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008
(XEN) Xen stack trace from rsp=ffff82c4802efd78:
(XEN) ffff83013fff3e10 ffff83013fff3560 ffff82c4802efde8 ffff82c48013aa32
(XEN) ffff82c4802efdb8 0000001800000010 00000000000000c0 0000000000000c00
(XEN) ffff82c4802efde8 ffff83013fff3e10 ffff82c4802388f0 ffff82c4802efe00
(XEN) 0000000000040000 ffff82c480238920 ffff82c4802efe38 ffff82c48013b698
(XEN) ffff83013fff3d80 000000000000001f ffff82c480264298 00000000ffffffed
(XEN) 0000000000000040 ffff83000008bfc0 ffff83000008bf70 ffff82c480264000
(XEN) ffff82c4802efe58 ffff82c4801377d5 0000000000000040 ffff82c4802eff28
(XEN) ffff82c4802eff18 ffff82c4802554b3 0000000000000000 0000000000000000
(XEN) 000000000f65f5c0 ffff8300bf4f5ff8 ffff83000008bfc0 0000100000000000
(XEN) ffff83000008bf70 ffff83000008bf70 0000000000000000 0000000001086001
(XEN) 000000000000000f 00000000000efced 0000000800000000 000000010000006e
(XEN) 0000000000000003 00000000000002f8 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000067e2c ffff82c4801000b5 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN) [<ffff82c480139897>] clear_fault_bits+0x40/0xdd
(XEN) [<ffff82c48013aa32>] init_vtd_hw+0x17b/0x3eb
(XEN) [<ffff82c48013b698>] intel_vtd_setup+0x572/0x65c
(XEN) [<ffff82c4801377d5>] iommu_setup+0x35/0xf2
(XEN) [<ffff82c4802554b3>] __start_xen+0x2028/0x23e5
(XEN)
(XEN) Pagetable walk from ffff82c3fff5aff8:
(XEN) L4[0x105] = 00000000bf4fa027 5555555555555555
(XEN) L3[0x10f] = 00000000bf66f063 5555555555555555
(XEN) L2[0x1ff] = 00000000bf66e063 5555555555555555
(XEN) L1[0x15a] = 0000000000000000 ffffffffffffffff
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) FATAL PAGE FAULT
(XEN) [error_code=0000]
(XEN) Faulting linear address: ffff82c3fff5aff8
(XEN) ****************************************
(XEN)
(XEN) Reboot in five seconds...
Lspci after booting with iommu=0:
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [40] #00 [0000]
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port
1 (rev 11)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fba00000-fbafffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 8383
Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1
Enable+
Address: fee0f00c Data: 4159
Masking: 00000003 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns,
L1 <4us
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+
BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 1, PowerLimit 75.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [150] Access Controls <?>
Capabilities: [160] Vendor Specific Information <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:08.0 System peripheral: Intel Corporation Core Processor System
Management Registers (rev 11)
Subsystem: Device 0043:0083
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0
unlimited, L1 unlimited
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [100] Vendor Specific Information <?>
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and
Scratchpad Registers (rev 11)
Subsystem: Device 0043:0083
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0
unlimited, L1 unlimited
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [100] Vendor Specific Information <?>
00:08.2 System peripheral: Intel Corporation Core Processor System Control
and Status Registers (rev 11)
Subsystem: Device 0043:0083
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0
unlimited, L1 unlimited
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [100] Vendor Specific Information <?>
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous
Registers (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing
and Protocol Registers (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller (rev 05) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fb9fe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High
Definition Audio (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 8375
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fb9f8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0
<64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive-
BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 1 (rev 05)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us,
L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 80, PowerLimit 25.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Address: fee0f00c Data: 4161
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8383
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 5 (rev 05)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us,
L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 84, PowerLimit 25.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Address: fee0f00c Data: 4169
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8383
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 6 (rev 05)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fbc00000-fbdfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us,
L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 85, PowerLimit 10.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Address: fee0f00c Data: 4171
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8383
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 7 (rev 05)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #7, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us,
L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Address: fee0f00c Data: 4179
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8383
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.7 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 8 (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbb00000-fbbfffff
Prefetchable memory behind bridge: 00000000d3f00000-00000000d3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 87, PowerLimit 10.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Address: fee0f00c Data: 4181
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8383
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller (rev 05) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fb9fd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=08, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000d4000000-00000000dfffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device 8383
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface
Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4
port SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 21
Region 0: I/O ports at ac00 [size=8]
Region 1: I/O ports at a880 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a480 [size=4]
Region 4: I/O ports at a400 [size=16]
Region 5: I/O ports at a080 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCIe advanced features <?>
Kernel driver in use: ata_piix
Kernel modules: ata_generic, pata_acpi
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus
Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 15
Region 0: Memory at fb9fc000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ffe0 [size=32]
Kernel modules: i2c-i801
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2
port SATA IDE Controller (rev 05) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device 8383
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 21
Region 0: I/O ports at bc00 [size=8]
Region 1: I/O ports at b880 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at b480 [size=4]
Region 4: I/O ports at b400 [size=16]
Region 5: I/O ports at b080 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCIe advanced features <?>
Kernel driver in use: ata_piix
Kernel modules: ata_generic, pata_acpi
01:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD
4350]
Subsystem: ASUSTeK Computer Inc. Device 032e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fbae0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at c000 [size=256]
Expansion ROM at fbac0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0
<64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100] Vendor Specific Information <?>
Kernel modules: radeon
01:00.1 Audio device: ATI Technologies Inc R700 Audio Device [Radeon HD
4000 Series]
Subsystem: ASUSTeK Computer Inc. Device aa38
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fbafc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0
<64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100] Vendor Specific Information <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B
PCI Express Gigabit Ethernet controller (rev 03)
Subsystem: ASUSTeK Computer Inc. Device 83a3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 409
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at d3fff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d3ff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at fbbf0000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable+
Address: 00000000fee0100c Data: 4189
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<512ns, L1 <64us
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [ac] MSI-X: Enable- Mask- TabSize=4
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data <?>
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: r8169
Kernel modules: r8169
04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI
Video and Audio Decoder (rev 02)
Subsystem: Hauppauge computer works Inc. Device 8101
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbc00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us,
L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data <?>
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [200] Virtual Channel <?>
Kernel driver in use: cx23885
Kernel modules: cx23885
07:01.0 Multimedia video controller: Internext Compression Inc iTVC15
MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. Device 4000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ivtv
Kernel modules: ivtv
07:02.0 PCI bridge: Pericom Semiconductor PI7C8140A PCI-to-PCI Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Bus: primary=07, secondary=08, subordinate=08, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] CompactPCI hot-swap <?>
Kernel modules: shpchp
07:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
Subsystem: ASUSTeK Computer Inc. Device 820d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at fbeff000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at fbe00000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Vital Product Data <?>
Kernel driver in use: r8169
Kernel modules: r8169
08:08.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. Device e807
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at dc000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ivtv
Kernel modules: ivtv
08:09.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. Device e817
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ivtv
Kernel modules: ivtv
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: collecting info on platforms with VT-d BIOS problems
@ 2010-01-30 21:57 Mark Hurenkamp
0 siblings, 0 replies; 12+ messages in thread
From: Mark Hurenkamp @ 2010-01-30 21:57 UTC (permalink / raw)
To: xen-devel
Hi,
I've posted this earlier but didn't see it appear on the list, so i
subscribed to the list, and now post it again.
> If you have encountered VT-d problems on a particular platform using
> latest xen-unstable, please provide the following information so that
> we can work with OEM's to get their BIOS's
> fixed:
>
> (a) Platform details (OEM, Product/Model#, Other identifying info)
> (b) BIOS version/number
> (c) Version of Xen with which failure is seen (if not the latest
> xen-unstable)
> (d) Specific error/failure details such as serial log
I own an Asus P7P55D-EVO board, which has vtx and vt-d features enabled in
the BIOS (i'm running the latest firmware 1207), however for me this
platform won't boot with iommu enabled.
Here I've included a failing boot log (iommu=1), and a lspci output for a
working boot (with iommu=0).
Let me know if there's other info you would like to see of this system.
I'd love to run this with the tuner cards in one hvm, and the graphics
card in another hvm...
Link to my board details:
http://www.asus.com/product.aspx?P_ID=YhNWZrOT1OWycIgo&templete=2
Recent xen (from xen-unstable) shows the following when i boot:
__ __ _ _ ___ ___ _____
\ \/ /___ _ __ | || | / _ \ / _ \ _ __ ___|___ / _ __ _ __ ___
\ // _ \ '_ \ | || |_| | | | | | |__| '__/ __| |_ \ __| '_ \| '__/ _ \
/ \ __/ | | | |__ _| |_| | |_| |__| | | (__ ___) |__| |_) | | | __/
/_/\_\___|_| |_| |_|(_)___(_)___/ |_| \___|____/ | .__/|_| \___|
|_|
(XEN) Xen version 4.0.0-rc3-pre (root@karpeer.net) (gcc version 4.4.1
(Ubuntu 4.4.1-4ubuntu8) ) Thu Jan 28 22:50:42 CET 2010
(XEN) Latest ChangeSet: Tue Jan 26 15:54:40 2010 +0000 20858:2636e5619708
(XEN) Command line: com1=112500,8n1 console=com1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 000000000009fc00 - 00000000000a0000 (reserved)
(XEN) 00000000000e4000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bf670000 (usable)
(XEN) 00000000bf670000 - 00000000bf688000 (ACPI data)
(XEN) 00000000bf688000 - 00000000bf6dc000 (ACPI NVS)
(XEN) 00000000bf6dc000 - 00000000bf700000 (reserved)
(XEN) 00000000bf800000 - 00000000c0000000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ffe00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000140000000 (usable)
(XEN) ACPI: RSDP 000FB470, 0024 (r2 ACPIAM)
(XEN) ACPI: XSDT BF670100, 006C (r1 120709 XSDT1509 20091207 MSFT 97)
(XEN) ACPI: FACP BF670290, 00F4 (r3 120709 FACP1509 20091207 MSFT 97)
(XEN) ACPI: DSDT BF6704A0, EF14 (r1 A1290 A1290001 1 INTL 20060113)
(XEN) ACPI: FACS BF688000, 0040
(XEN) ACPI: APIC BF670390, 00CC (r1 120709 APIC1509 20091207 MSFT 97)
(XEN) ACPI: MCFG BF670460, 003C (r1 120709 OEMMCFG 20091207 MSFT 97)
(XEN) ACPI: OEMB BF688040, 0072 (r1 120709 OEMB1509 20091207 MSFT 97)
(XEN) ACPI: HPET BF67F7A0, 0038 (r1 120709 OEMHPET 20091207 MSFT 97)
(XEN) ACPI: DMAR BF6880C0, 0090 (r1 AMI OEMDMAR 1 MSFT 97)
(XEN) ACPI: ASPT BF67FA40, 0034 (r6 120709 PerfTune 20091207 MSFT 97)
(XEN) ACPI: OSFR BF67FA80, 00B0 (r1 120709 OEMOSFR 20091207 MSFT 97)
(XEN) ACPI: SSDT BF689760, 0363 (r1 DpgPmm CpuPm 12 INTL 20060113)
(XEN) System RAM: 3836MB (3929012kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000140000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000ff780
(XEN) DMI 2.6 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[bf68800c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
(XEN) ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) [VT-D]dmar.c:631: Host address width 36
(XEN) [VT-D]dmar.c:640: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:374: dmaru->address = fed90000
(XEN) [VT-D]dmar.c:386: flags: INCLUDE_ALL
(XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:535: RMRR region: base_addr e4000 end_address e7fff
(XEN) [VT-D]dmar.c:644: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:535: RMRR region: base_addr bf6ec000 end_address
bf6fffff
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: Not using MMCONFIG.
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2675.032 MHz processor.
(XEN) Initing memory sharing.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Thermal monitoring enabled (TM1)
(XEN) [VT-D]iommu.c:1062: drhd->address = fed90000
(XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff57000
(XEN) Intel VT-d Snoop Control supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation supported.
(XEN) Intel VT-d Interrupt Remapping supported.
(XEN) ----[ Xen-4.0.0-rc3-pre x86_64 debug=y Not tainted ]----
(XEN) CPU: 0
(XEN) RIP: e008:[<ffff82c480139897>] clear_fault_bits+0x40/0xdd
(XEN) RFLAGS: 0000000000010002 CONTEXT: hypervisor
(XEN) rax: 0000000000000282 rbx: ffff83013fff3e10 rcx: ffff82c3fff5700c
(XEN) rdx: ffff82c3fff57000 rsi: ffff82c3fff5aff8 rdi: ffff82c3fff57008
(XEN) rbp: ffff82c4802efd88 rsp: ffff82c4802efd78 r8: ffffffff00000000
(XEN) r9: 0000000000000004 r10: 0000000000000000 r11: 0000000000000040
(XEN) r12: ffff83013fff3e48 r13: 0000000000000018 r14: 0000000000000018
(XEN) r15: ffff82c48013a015 cr0: 000000008005003b cr4: 00000000000026f0
(XEN) cr3: 00000000bf4f4000 cr2: ffff82c3fff5aff8
(XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008
(XEN) Xen stack trace from rsp=ffff82c4802efd78:
(XEN) ffff83013fff3e10 ffff83013fff3560 ffff82c4802efde8 ffff82c48013aa32
(XEN) ffff82c4802efdb8 0000001800000010 00000000000000c0 0000000000000c00
(XEN) ffff82c4802efde8 ffff83013fff3e10 ffff82c4802388f0 ffff82c4802efe00
(XEN) 0000000000040000 ffff82c480238920 ffff82c4802efe38 ffff82c48013b698
(XEN) ffff83013fff3d80 000000000000001f ffff82c480264298 00000000ffffffed
(XEN) 0000000000000040 ffff83000008bfc0 ffff83000008bf70 ffff82c480264000
(XEN) ffff82c4802efe58 ffff82c4801377d5 0000000000000040 ffff82c4802eff28
(XEN) ffff82c4802eff18 ffff82c4802554b3 0000000000000000 0000000000000000
(XEN) 000000000f65f5c0 ffff8300bf4f5ff8 ffff83000008bfc0 0000100000000000
(XEN) ffff83000008bf70 ffff83000008bf70 0000000000000000 0000000001086001
(XEN) 000000000000000f 00000000000efced 0000000800000000 000000010000006e
(XEN) 0000000000000003 00000000000002f8 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000067e2c ffff82c4801000b5 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN) [<ffff82c480139897>] clear_fault_bits+0x40/0xdd
(XEN) [<ffff82c48013aa32>] init_vtd_hw+0x17b/0x3eb
(XEN) [<ffff82c48013b698>] intel_vtd_setup+0x572/0x65c
(XEN) [<ffff82c4801377d5>] iommu_setup+0x35/0xf2
(XEN) [<ffff82c4802554b3>] __start_xen+0x2028/0x23e5
(XEN)
(XEN) Pagetable walk from ffff82c3fff5aff8:
(XEN) L4[0x105] = 00000000bf4fa027 5555555555555555
(XEN) L3[0x10f] = 00000000bf66f063 5555555555555555
(XEN) L2[0x1ff] = 00000000bf66e063 5555555555555555
(XEN) L1[0x15a] = 0000000000000000 ffffffffffffffff
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) FATAL PAGE FAULT
(XEN) [error_code=0000]
(XEN) Faulting linear address: ffff82c3fff5aff8
(XEN) ****************************************
(XEN)
(XEN) Reboot in five seconds...
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2010-03-29 7:20 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-01-23 0:22 collecting info on platforms with VT-d BIOS problems Kay, Allen M
2010-01-23 8:09 ` Fantu
2010-01-23 13:11 ` Pasi Kärkkäinen
2010-01-25 15:25 ` Andrew Oakley
2010-01-25 16:35 ` Sander Eikelenboom
2010-02-01 13:04 ` Andrew Oakley
2010-01-25 15:59 ` Christian Tramnitz
2010-01-25 16:26 ` Sander Eikelenboom
2010-03-29 7:20 ` collecting info on platforms with VT-d BIOS problems / Supermicro X7SB4 Pasi Kärkkäinen
-- strict thread matches above, loose matches on Subject: below --
2010-01-29 1:26 collecting info on platforms with VT-d BIOS problems Mark Hurenkamp
2010-01-29 21:56 Mark Hurenkamp
2010-01-30 21:57 Mark Hurenkamp
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).