* Xen-4.0.0-rc1 root Device ca01 and console hvc0
@ 2010-01-30 16:40 Stefan Kuhne
2010-01-31 11:22 ` Stefan Kuhne
0 siblings, 1 reply; 3+ messages in thread
From: Stefan Kuhne @ 2010-01-30 16:40 UTC (permalink / raw)
To: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 205 bytes --]
Hello,
i test Xen-4.0.0-rc1 and have solved some problems.
But why i have to set root to "ca01"?
Can i set console to tty1 instead of hvc0?
My Disks are maped to hdax.
Regards,
Stefan Kuhne
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 552 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Xen-4.0.0-rc1 root Device ca01 and console hvc0
2010-01-30 16:40 Xen-4.0.0-rc1 root Device ca01 and console hvc0 Stefan Kuhne
@ 2010-01-31 11:22 ` Stefan Kuhne
2010-01-31 19:13 ` Marc - A. Dahlhaus
0 siblings, 1 reply; 3+ messages in thread
From: Stefan Kuhne @ 2010-01-31 11:22 UTC (permalink / raw)
To: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 276 bytes --]
Am 30.01.2010 17:40, schrieb Stefan Kuhne:
Hello,
> Can i set console to tty1 instead of hvc0?
>
How can i get informations about /dev/hvc0?
I must modify my initrd for it.
Because of these two lines:
exec >/dev/tty1
exec 2>/dev/tty1
Regards,
Stefan Kuhne
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 552 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Xen-4.0.0-rc1 root Device ca01 and console hvc0
2010-01-31 11:22 ` Stefan Kuhne
@ 2010-01-31 19:13 ` Marc - A. Dahlhaus
0 siblings, 0 replies; 3+ messages in thread
From: Marc - A. Dahlhaus @ 2010-01-31 19:13 UTC (permalink / raw)
To: xen-devel, stefan.kuhne
Hello Stefan,
Am 31.01.2010 12:22, schrieb Stefan Kuhne:
> Am 30.01.2010 17:40, schrieb Stefan Kuhne:
> Hello,
>
>> Can i set console to tty1 instead of hvc0?
>>
> How can i get informations about /dev/hvc0?
> I must modify my initrd for it.
>
> Because of these two lines:
> exec>/dev/tty1
> exec 2>/dev/tty1
You can try to replace your lines with the following one (from dracut)
to get attached to whatever default console was defined on kernel
commandline:
exec 0<>/dev/console 1<>/dev/console 2<>/dev/console
Marc
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-01-31 19:13 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-01-30 16:40 Xen-4.0.0-rc1 root Device ca01 and console hvc0 Stefan Kuhne
2010-01-31 11:22 ` Stefan Kuhne
2010-01-31 19:13 ` Marc - A. Dahlhaus
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).