From mboxrd@z Thu Jan 1 00:00:00 1970 From: Min Lee Subject: Re: xen-unstable + pvops-kernel doesn't boot on my machine, ibm x3550M2 Date: Thu, 27 May 2010 12:35:35 -0400 Message-ID: <4BFE9F57.9060206@gatech.edu> References: <4BFD5867.7090104@gatech.edu> <20100526194545.GA13362@phenom.dumpdata.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20100526194545.GA13362@phenom.dumpdata.com> List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , Sender: xen-devel-bounces@lists.xensource.com Errors-To: xen-devel-bounces@lists.xensource.com To: Xen-devel@lists.xensource.com List-Id: xen-devel@lists.xenproject.org Hi, thanks I'm using centos 5 and it was valuable information, but it still doesn't boot. I think the issue is not in the distribution, but I'll try Ubuntu. full serial boot log is attached to below one to Jeremy's response. thanks! Min On 5/26/2010 3:45 PM, Konrad Rzeszutek Wilk wrote: > On Wed, May 26, 2010 at 01:20:39PM -0400, Min Lee wrote: >> Hello. >> I've tried Xen-unstable + Jeremy's pvops kernel on ibm x3550M2 server >> machine, but it fails to mount root fs. > > What is the distro you have? If it is RHEL5 look also: > http://wiki.xensource.com/xenwiki/2.6.18-to-2.6.31-and-higher > >> I'm using ibm x3550M2 server with broadcom NetXtreme II network card, and >> ibm RAID. (64bit) >> Even running pvops-kernel without xen fails, too, and I could see this >> booting message. >> >> pci 0000:01:00.0: BAR 6: no parent found for of device [0xffff0000-ffffffff] >> >> Module for the raid (megaraid_sas.ko) is in initrd file. >> I've also tried xen-unstable + 2.6.18-xen and it boots, but it doesn't >> detect my network card. >> it seems like it fails to allocate apic I/O resources. >> Anybody who's running xen-unstable on similar configuration ?? > > Please follow http://wiki.xensource.com/xenwiki/XenParavirtOps the > 'Troubleshooting..' section and also the > "Are there more debugging options I could enable to troubleshoot booting > problems?" > > Please attach the full debug serial console. I belive that machine has > an IPMI BMC, so you should be able to use SOL. Look for details on: > http://wiki.xensource.com/xenwiki/XenSerialConsole > >> Thank you for any comments or help. >> Min >> >> _______________________________________________ >> Xen-devel mailing list >> Xen-devel@lists.xensource.com >> http://lists.xensource.com/xen-devel >