* Re: xen-unstable + pvops-kernel doesn't boot on my machine, ibm x3550M2
2010-05-26 21:09 ` Jeremy Fitzhardinge
@ 2010-05-27 16:10 ` Min Lee
2010-05-27 17:31 ` Jeremy Fitzhardinge
2010-05-27 20:25 ` Konrad Rzeszutek Wilk
0 siblings, 2 replies; 9+ messages in thread
From: Min Lee @ 2010-05-27 16:10 UTC (permalink / raw)
To: Jeremy Fitzhardinge; +Cc: Xen-devel
[-- Attachment #1: Type: text/plain, Size: 1519 bytes --]
Hi, Jeremy.
I'm attaching full boot log for both working/non-working case.
The working case is xen-unstable+linux2.6.18.8 and it boots up, at least.
Nonworking case is pvops kernel native.
it might be some stupid mistake, but I've tried many configurations, but
still it doesn't boot..so I hope I can hear from you.
Thanks!
Min
On 5/26/2010 5:09 PM, Jeremy Fitzhardinge wrote:
> On 05/26/2010 10:20 AM, Min Lee wrote:
>> Hello.
>> I've tried Xen-unstable + Jeremy's pvops kernel on ibm x3550M2 server
>> machine, but it fails to mount root fs.
>> I'm using ibm x3550M2 server with broadcom NetXtreme II network card,
>> and ibm RAID. (64bit)
>> Even running pvops-kernel without xen fails, too, and I could see this
>> booting message.
>>
>> pci 0000:01:00.0: BAR 6: no parent found for of device
>> [0xffff0000-ffffffff]
>
> Can you post the full boot log? And the boot log of a kernel which does
> succeed? If the kernel doesn't boot native you need to sort that out
> before trying to debug the Xen case.
>
> J
>
>>
>> Module for the raid (megaraid_sas.ko) is in initrd file.
>> I've also tried xen-unstable + 2.6.18-xen and it boots, but it doesn't
>> detect my network card.
>> it seems like it fails to allocate apic I/O resources.
>> Anybody who's running xen-unstable on similar configuration ??
>> Thank you for any comments or help.
>> Min
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>
>
[-- Attachment #2: log_to_jeremy.txt --]
[-- Type: text/plain, Size: 64271 bytes --]
not-working case
kernel /vmlinuz-2.6.32.13 ro root=/dev/VolGroup01/LogVol00
initrd /initrd-2.6.32.13.img
-----
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.13 (root@vmphone210.research.avayalabs.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #2 SMP Wed May 26 16:42:38 EDT 2010
[ 0.000000] Command line: ro root=/dev/VolGroup01/LogVol00 console=tty0 console=ttyS0,115200
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007d93e000 (usable)
[ 0.000000] BIOS-e820: 000000007d93e000 - 000000007d9ee000 (reserved)
[ 0.000000] BIOS-e820: 000000007d9ee000 - 000000007f68f000 (usable)
[ 0.000000] BIOS-e820: 000000007f68f000 - 000000007f6df000 (reserved)
[ 0.000000] BIOS-e820: 000000007f6df000 - 000000007f7df000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f7df000 - 000000007f7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f7ff000 - 000000007f800000 (usable)
[ 0.000000] BIOS-e820: 000000007f800000 - 0000000090000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000380000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0x380000 max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0x7f800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009c400 (usable)
[ 0.000000] modified: 000000000009c400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007d93e000 (usable)
[ 0.000000] modified: 000000007d93e000 - 000000007d9ee000 (reserved)
[ 0.000000] modified: 000000007d9ee000 - 000000007f68f000 (usable)
[ 0.000000] modified: 000000007f68f000 - 000000007f6df000 (reserved)
[ 0.000000] modified: 000000007f6df000 - 000000007f7df000 (ACPI NVS)
[ 0.000000] modified: 000000007f7df000 - 000000007f7ff000 (ACPI data)
[ 0.000000] modified: 000000007f7ff000 - 000000007f800000 (usable)
[ 0.000000] modified: 000000007f800000 - 0000000090000000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000380000000 (usable)
[ 0.000000] init_memory_mapping: 0000000000000000-000000007f800000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000380000000
[ 0.000000] RAMDISK: 37d0e000 - 37fef471
[ 0.000000] ACPI: RSDP 00000000000fdfd0 00024 (v02 IBM )
[ 0.000000] ACPI: XSDT 000000007f7fe120 0007C (v01 IBM THURLEY 00000000 01000013)
[ 0.000000] ACPI: FACP 000000007f7fb000 000F4 (v04 IBM THURLEY 00000000 IBM 01000013)
[ 0.000000] ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-607)
[ 0.000000] ACPI: DSDT 000000007f7f8000 02885 (v01 IBM THURLEY 00000003 IBM 01000013)
[ 0.000000] ACPI: FACS 000000007f735000 00040
[ 0.000000] ACPI: TCPA 000000007f7fd000 00064 (v00 00000000 00000000)
[ 0.000000] ACPI: APIC 000000007f7f7000 000DE (v02 IBM THURLEY 00000000 IBM 01000013)
[ 0.000000] ACPI: MCFG 000000007f7f6000 0003C (v01 IBM THURLEY 00000001 IBM 01000013)
[ 0.000000] ACPI: SLIC 000000007f7f5000 00176 (v01 IBM THURLEY 00000000 IBM 01000013)
[ 0.000000] ACPI: HPET 000000007f7f4000 00038 (v01 IBM THURLEY 00000001 IBM 01000013)
[ 0.000000] ACPI: SSDT 000000007f7f3000 00113 (v02 IBM CPUSCOPE 00004000 IBM 01000013)
[ 0.000000] ACPI: SSDT 000000007f7f2000 0051C (v02 IBM PSTATEPM 00004000 IBM 01000013)
[ 0.000000] ACPI: SSDT 000000007f7f1000 00362 (v02 IBM CPUCSTAT 00004000 IBM 01000013)
[ 0.000000] ACPI: ERST 000000007f7f0000 00230 (v01 IBM THURLEY 00000001 IBM 01000013)
[ 0.000000] ACPI: DMAR 000000007f7ef000 000C8 (v01 IBM THURLEY 00000001 IBM 01000013)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000380000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000380000000
[ 0.000000] NODE_DATA [0000000000013000 - 0000000000017fff]
[ 0.000000] bootmap [0000000000018000 - 0000000000087fff] pages 70
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0380000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001b135c4] TEXT DATA BSS ==> [0001000000 - 0001b135c4]
[ 0.000000] #3 [0037d0e000 - 0037fef471] RAMDISK ==> [0037d0e000 - 0037fef471]
[ 0.000000] #4 [000009c400 - 0000100000] BIOS reserved ==> [000009c400 - 0000100000]
[ 0.000000] #5 [0001b14000 - 0001b14488] BRK ==> [0001b14000 - 0001b14488]
[ 0.000000] #6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
[ 0.000000] #7 [0000009000 - 0000013000] PGTABLE ==> [0000009000 - 0000013000]
[ 0.000000] found SMP MP-table at [ffff88000009c540] 9c540
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00380000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x0007d93e
[ 0.000000] 0: 0x0007d9ee -> 0x0007f68f
[ 0.000000] 0: 0x0007f7ff -> 0x0007f800
[ 0.000000] 0: 0x00100000 -> 0x00380000
[ 0.000000] ACPI: PM-Timer IO Port: 0x588
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x11] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x13] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x15] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007d93e000 - 000000007d9ee000
[ 0.000000] PM: Registered nosave memory: 000000007f68f000 - 000000007f6df000
[ 0.000000] PM: Registered nosave memory: 000000007f6df000 - 000000007f7df000
[ 0.000000] PM: Registered nosave memory: 000000007f7df000 - 000000007f7ff000
[ 0.000000] PM: Registered nosave memory: 000000007f800000 - 0000000090000000
[ 0.000000] PM: Registered nosave memory: 0000000090000000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff800000
[ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 90000000 (gap: 90000000:6ed1c000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s90776 r8192 d23912 u131072
[ 0.000000] pcpu-alloc: s90776 r8192 d23912 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3092742
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: ro root=/dev/VolGroup01/LogVol00 console=tty0 console=ttyS0,115200
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 12317560k/14680064k available (5255k kernel code, 2107940k absent, 254564k reserved, 3589k data, 772k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2560
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 125829120 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Fast TSC calibration using PIT
[ 0.008000] Detected 2266.729 MHz processor.
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4533.45 BogoMIPS (lpj=9066916)
[ 0.010770] Security Framework initialized
[ 0.014934] SELinux: Disabled at boot.
[ 0.019876] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.030777] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.039526] Mount-cache hash table entries: 256
[ 0.044226] Initializing cgroup subsys ns
[ 0.048302] Initializing cgroup subsys cpuacct
[ 0.052811] Initializing cgroup subsys memory
[ 0.057235] Initializing cgroup subsys freezer
[ 0.063454] CPU: Physical Processor ID: 0
[ 0.067528] CPU: Processor Core ID: 0
[ 0.071262] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.076095] CPU: L2 cache: 256K
[ 0.079303] CPU: L3 cache: 8192K
[ 0.082597] CPU 0/0x0 -> Node 0
[ 0.085806] using mwait in idle threads.
[ 0.089792] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.096688] ... version: 3
[ 0.100761] ... bit width: 48
[ 0.104921] ... generic registers: 4
[ 0.108994] ... value mask: 0000ffffffffffff
[ 0.114368] ... max period: 000000007fffffff
[ 0.119741] ... fixed-purpose events: 3
[ 0.123814] ... event mask: 000000070000000f
[ 0.130198] ACPI: Core revision 20090903
[ 0.137567] Setting APIC routing to physical flat
[ 0.142832] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.188517] CPU0: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.301000] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.316227] Initializing CPU#1
[ 0.392749] CPU: Physical Processor ID: 0
[ 0.392750] CPU: Processor Core ID: 1
[ 0.392752] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.392754] CPU: L2 cache: 256K
[ 0.392755] CPU: L3 cache: 8192K
[ 0.392757] CPU 1/0x2 -> Node 0
[ 0.392856] CPU1: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.425555] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.451947] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.467065] Initializing CPU#2
[ 0.544490] CPU: Physical Processor ID: 0
[ 0.544491] CPU: Processor Core ID: 2
[ 0.544494] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.544495] CPU: L2 cache: 256K
[ 0.544496] CPU: L3 cache: 8192K
[ 0.544498] CPU 2/0x4 -> Node 0
[ 0.544593] CPU2: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.577305] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.603698] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.618817] Initializing CPU#3
[ 0.696231] CPU: Physical Processor ID: 0
[ 0.696232] CPU: Processor Core ID: 3
[ 0.696235] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.696236] CPU: L2 cache: 256K
[ 0.696237] CPU: L3 cache: 8192K
[ 0.696239] CPU 3/0x6 -> Node 0
[ 0.696245] CPU3: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.728945] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.755281] Brought up 4 CPUs
[ 0.758314] Total of 4 processors activated (18133.45 BogoMIPS).
[ 0.766211] regulator: core version 0.5
[ 0.770140] Time: 15:47:39 Date: 05/27/10
[ 0.774339] NET: Registered protocol family 16
[ 0.778921] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.786561] ACPI: bus type pci registered
[ 0.790692] PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
[ 0.797799] PCI: MCFG area at 80000000 reserved in E820
[ 0.807766] PCI: Using MMCONFIG at 80000000 - 8fffffff
[ 0.812963] PCI: Using configuration type 1 for base access
[ 0.819251] bio: create slab <bio-0> at 0
[ 0.827594] ACPI: Interpreter enabled
[ 0.831324] ACPI: (supports S0 S1 S5)
[ 0.835266] ACPI: Using IOAPIC for interrupt routing
[ 0.843806] ACPI: No dock devices found.
[ 0.847976] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.852896] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.859050] pci 0000:00:00.0: PME# disabled
[ 0.863353] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.869505] pci 0000:00:01.0: PME# disabled
[ 0.873807] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.879960] pci 0000:00:02.0: PME# disabled
[ 0.884263] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.890417] pci 0000:00:03.0: PME# disabled
[ 0.894719] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.900871] pci 0000:00:07.0: PME# disabled
[ 0.906138] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.912292] pci 0000:00:1a.7: PME# disabled
[ 0.916595] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.922749] pci 0000:00:1c.0: PME# disabled
[ 0.927055] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.933208] pci 0000:00:1c.4: PME# disabled
[ 0.937751] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.943904] pci 0000:00:1d.7: PME# disabled
[ 0.948565] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
[ 0.954718] pci 0000:0b:00.0: PME# disabled
[ 0.959057] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold
[ 0.965211] pci 0000:0b:00.1: PME# disabled
[ 0.969577] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
[ 0.975730] pci 0000:10:00.0: PME# disabled
[ 0.980074] pci 0000:10:00.1: PME# supported from D0 D3hot D3cold
[ 0.986228] pci 0000:10:00.1: PME# disabled
[ 0.990810] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.996964] pci 0000:06:00.0: PME# disabled
[ 1.001495] pci 0000:00:1e.0: transparent bridge
[ 1.012058] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 1.020350] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 1.028643] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 1.036939] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 1.045245] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 1.054811] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 1.063127] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 1.071446] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 1.080957] vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.089120] vgaarb: loaded
[ 1.091959] SCSI subsystem initialized
[ 1.095878] usbcore: registered new interface driver usbfs
[ 1.101433] usbcore: registered new interface driver hub
[ 1.106822] usbcore: registered new device driver usb
[ 1.112014] ACPI: WMI: Mapper loaded
[ 1.115654] PCI: Using ACPI for IRQ routing
[ 1.120068] Bluetooth: Core ver 2.15
[ 1.123730] NET: Registered protocol family 31
[ 1.128234] Bluetooth: HCI device and connection manager initialized
[ 1.134647] Bluetooth: HCI socket layer initialized
[ 1.139587] NET: Registered protocol family 8
[ 1.144003] NET: Registered protocol family 20
[ 1.148516] NetLabel: Initializing
[ 1.151980] NetLabel: domain hash size = 128
[ 1.156398] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.161433] NetLabel: unlabeled traffic allowed by default
[ 1.167116] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.172651] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.190562] Switching to clocksource tsc
[ 1.195814] pnp: PnP ACPI init
[ 1.198936] ACPI: bus type pnp registered
[ 1.204631] pnp: PnP ACPI: found 13 devices
[ 1.208881] ACPI: ACPI bus type pnp unregistered
[ 1.213570] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
[ 1.220765] system 00:06: ioport range 0x400-0x43f has been reserved
[ 1.227178] system 00:06: ioport range 0x440-0x45f has been reserved
[ 1.233595] system 00:06: ioport range 0x460-0x47f has been reserved
[ 1.240011] system 00:06: ioport range 0x580-0x5ff has been reserved
[ 1.246427] system 00:06: ioport range 0x5e0-0x5ff has been reserved
[ 1.252841] system 00:06: ioport range 0xcf9-0xcf9 could not be reserved
[ 1.259605] system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.266797] system 00:0a: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 1.274351] system 00:0a: iomem range 0xfee00000-0xfeefffff has been reserved
[ 1.281543] system 00:0a: iomem range 0x80000000-0x8fffffff has been reserved
[ 1.288735] system 00:0a: iomem range 0xffc00000-0xffffffff has been reserved
[ 1.295927] system 00:0a: iomem range 0xfeb00000-0xfebfffff has been reserved
[ 1.303120] system 00:0a: iomem range 0xfe710000-0xfe711fff has been reserved
[ 1.310312] system 00:0a: iomem range 0xfe800000-0xfe9fffff has been reserved
[ 1.317505] system 00:0a: iomem range 0xfc000000-0xfcffffff has been reserved
[ 1.324698] system 00:0a: iomem range 0xfea00000-0xfeafffff has been reserved
[ 1.331892] system 00:0b: ioport range 0xca0-0xca1 has been reserved
[ 1.338307] system 00:0b: ioport range 0xca4-0xca9 has been reserved
[ 1.344720] system 00:0b: ioport range 0xcaa-0xcab has been reserved
[ 1.351133] system 00:0b: ioport range 0xcac-0xccb has been reserved
[ 1.357548] system 00:0c: ioport range 0xca2-0xca2 has been reserved
[ 1.363961] system 00:0c: ioport range 0xca3-0xca3 has been reserved
[ 1.375110] pci 0000:01:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff]
[ 1.383504] pci 0000:00:01.0: PCI bridge, secondary bus 0000:0b
[ 1.389484] pci 0000:00:01.0: IO window: disabled
[ 1.394429] pci 0000:00:01.0: MEM window: 0x96000000-0x99ffffff
[ 1.400582] pci 0000:00:01.0: PREFETCH window: disabled
[ 1.406044] pci 0000:00:02.0: PCI bridge, secondary bus 0000:10
[ 1.412024] pci 0000:00:02.0: IO window: disabled
[ 1.416963] pci 0000:00:02.0: MEM window: 0x92000000-0x95ffffff
[ 1.423115] pci 0000:00:02.0: PREFETCH window: disabled
[ 1.428575] pci 0000:00:03.0: PCI bridge, secondary bus 0000:15
[ 1.434555] pci 0000:00:03.0: IO window: disabled
[ 1.439502] pci 0000:00:03.0: MEM window: disabled
[ 1.444529] pci 0000:00:03.0: PREFETCH window: disabled
[ 1.449989] pci 0000:00:07.0: PCI bridge, secondary bus 0000:1a
[ 1.455969] pci 0000:00:07.0: IO window: disabled
[ 1.460911] pci 0000:00:07.0: MEM window: disabled
[ 1.465939] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.473152] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 1.479138] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 1.484512] pci 0000:00:1c.0: MEM window: 0x9b900000-0x9b9fffff
[ 1.490666] pci 0000:00:1c.0: PREFETCH window: 0x90000000-0x901fffff
[ 1.497255] pci 0000:06:00.0: PCI bridge, secondary bus 0000:07
[ 1.503235] pci 0000:06:00.0: IO window: disabled
[ 1.508176] pci 0000:06:00.0: MEM window: 0x9b000000-0x9b8fffff
[ 1.514331] pci 0000:06:00.0: PREFETCH window: 0x9a000000-0x9affffff
[ 1.520922] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
[ 1.526901] pci 0000:00:1c.4: IO window: disabled
[ 1.531843] pci 0000:00:1c.4: MEM window: 0x9b000000-0x9b8fffff
[ 1.537997] pci 0000:00:1c.4: PREFETCH window: 0x0000009a000000-0x0000009affffff
[ 1.545641] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:1f
[ 1.551622] pci 0000:00:1e.0: IO window: disabled
[ 1.556563] pci 0000:00:1e.0: MEM window: disabled
[ 1.561590] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.567061] pci 0000:00:01.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 1.573831] pci 0000:00:02.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29
[ 1.580600] pci 0000:00:03.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 1.587371] pci 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[ 1.594140] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.600910] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.607680] pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.614500] NET: Registered protocol family 2
[ 1.619245] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.627783] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.636625] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.643539] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.650215] TCP reno registered
[ 1.653517] NET: Registered protocol family 1
[ 1.658120] Trying to unpack rootfs image as initramfs...
[ 1.716420] Freeing initrd memory: 2949k freed
[ 1.721258] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.727757] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 1.736003] DMA: software IO TLB at phys 0x20000000 - 0x24000000
[ 1.742261] Scanning for low memory corruption every 60 seconds
[ 1.748346] audit: initializing netlink socket (disabled)
[ 1.753814] type=2000 audit(1274975258.428:1): initialized
[ 1.769525] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.777023] VFS: Disk quotas dquot_6.5.2
[ 1.781059] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.788057] fuse init (API version 7.13)
[ 1.792104] msgmni has been set to 24063
[ 1.796258] alg: No test for stdrng (krng)
[ 1.800423] io scheduler noop registered
[ 1.804412] io scheduler anticipatory registered
[ 1.809091] io scheduler deadline registered
[ 1.813456] io scheduler cfq registered (default)
[ 1.818961] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.824630] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.831395] input: Power Button as /class/input/input0
[ 1.836594] ACPI: Power Button [PWRF]
[ 1.840620] processor LNXCPU:00: registered as cooling_device0
[ 1.846652] processor LNXCPU:01: registered as cooling_device1
[ 1.852679] processor LNXCPU:02: registered as cooling_device2
[ 1.858721] processor LNXCPU:03: registered as cooling_device3
[ 1.865937] xenfs: not registering filesystem on non-xen platform
[ 1.872790] Linux agpgart interface v0.103
[ 1.876952] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
ÿ[ 1.883461] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.889710] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.896089] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.901926] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.908260] brd: module loaded
[ 1.911684] loop: module loaded
[ 1.914938] input: Macintosh mouse button emulation as /class/input/input1
[ 1.921977] ata_piix 0000:00:1f.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.929173] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.934781] scsi0 : ata_piix
[ 1.937773] scsi1 : ata_piix
[ 1.940737] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x20f0 irq 14
[ 1.947762] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x20f8 irq 15
[ 1.954797] ata_piix 0000:00:1f.5: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 1.961995] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.967582] scsi2 : ata_piix
[ 1.970561] scsi3 : ata_piix
[ 1.973525] ata3: SATA max UDMA/133 cmd 0x2108 ctl 0x2124 bmdma 0x20d0 irq 21
[ 1.980718] ata4: SATA max UDMA/133 cmd 0x2100 ctl 0x2120 bmdma 0x20d8 irq 21
[ 1.988382] Fixed MDIO Bus: probed
[ 1.991851] PPP generic driver version 2.4.2
[ 1.996236] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.002837] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 2.010049] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.015366] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.022858] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.031340] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x9ba21400
[ 2.049182] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.055048] usb usb1: configuration #1 chosen from 1 choice
[ 2.060705] hub 1-0:1.0: USB hub found
[ 2.064519] hub 1-0:1.0: 6 ports detected
[ 2.068636] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.075841] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.081152] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.088637] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.097116] ehci_hcd 0000:00:1d.7: irq 17, io mem 0x9ba21000
[ 2.117070] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.122928] usb usb2: configuration #1 chosen from 1 choice
[ 2.128578] hub 2-0:1.0: USB hub found
[ 2.132392] hub 2-0:1.0: 6 ports detected
[ 2.136508] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.142758] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.149210] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.156409] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.161717] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.169225] uhci_hcd 0000:00:1a.0: irq 17, io base 0x000020a0
[ 2.175084] usb usb3: configuration #1 chosen from 1 choice
[ 2.180733] hub 3-0:1.0: USB hub found
[ 2.184547] hub 3-0:1.0: 2 ports detected
[ 2.188653] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 2.195853] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.201160] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.208653] uhci_hcd 0000:00:1a.1: irq 18, io base 0x00002080
[ 2.214516] usb usb4: configuration #1 chosen from 1 choice
[ 2.220168] hub 4-0:1.0: USB hub found
[ 2.223983] hub 4-0:1.0: 2 ports detected
[ 2.228089] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.235307] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.240621] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 2.248109] uhci_hcd 0000:00:1d.0: irq 17, io base 0x00002060
[ 2.253967] usb usb5: configuration #1 chosen from 1 choice
[ 2.259620] hub 5-0:1.0: USB hub found
[ 2.263433] hub 5-0:1.0: 2 ports detected
[ 2.267538] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 2.274743] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.280073] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 2.287581] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00002040
[ 2.293440] usb usb6: configuration #1 chosen from 1 choice
[ 2.299095] hub 6-0:1.0: USB hub found
[ 2.302910] hub 6-0:1.0: 2 ports detected
[ 2.307014] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 2.314217] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.319528] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 2.321715] ata3: SATA link down (SStatus 0 SControl 0)
[ 2.332312] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00002020
[ 2.334548] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.343647] usb usb7: configuration #1 chosen from 1 choice
[ 2.349302] hub 7-0:1.0: USB hub found
[ 2.353117] hub 7-0:1.0: 2 ports detected
[ 2.357253] usbcore: registered new interface driver libusual
[ 2.363077] usbcore: registered new interface driver usbserial
[ 2.368991] USB Serial support registered for generic
[ 2.388639] usbcore: registered new interface driver usbserial_generic
[ 2.395224] usbserial: USB Serial Driver core
[ 2.399677] PNP: No PS/2 controller found. Probing ports directly.
[ 2.606958] ata2.00: SATA link down (SStatus 0 SControl 0)
[ 2.612515] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 2.616359] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 2.656250] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.661325] mice: PS/2 mouse device common for all mice
[ 2.666668] rtc_cmos 00:02: RTC can wake from S4
[ 2.671369] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.677543] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.684483] device-mapper: uevent: version 1.0.3
[ 2.689218] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.697792] device-mapper: multipath: version 1.1.0 loaded
[ 2.703337] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.710189] cpuidle: using governor ladder
[ 2.714492] cpuidle: using governor menu
[ 2.718813] TCP cubic registered
[ 2.722265] NET: Registered protocol family 10
[ 2.727236] lo: Disabled Privacy Extensions
[ 2.731786] NET: Registered protocol family 17
[ 2.736365] Bluetooth: L2CAP ver 2.14
[ 2.740092] Bluetooth: L2CAP socket layer initialized
[ 2.745264] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.749917] Bluetooth: SCO socket layer initialized
[ 2.754944] Bluetooth: RFCOMM TTY layer initialized
[ 2.759892] Bluetooth: RFCOMM socket layer initialized
[ 2.766891] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.766894] Bluetooth: RFCOMM ver 1.11
[ 2.777220] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 2.783202] registered taskstats version 1
[ 2.788132] Magic number: 10:848:791
[ 2.792143] rtc_cmos 00:02: setting system clock to 2010-05-27 15:47:41 UTC (1274975261)
[ 2.800369] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.806565] EDD information not available.
[ 2.806958] ata1.00: ATAPI: TSSTcorp CDDVDW TS-L633B, IB03, max UDMA/100
[ 2.832097] usb 3-1: configuration #1 chosen from 1 choice
[ 2.840246] ata1.00: configured for UDMA/100
[ 2.853960] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633B IB03 PQ: 0 ANSI: 5
[ 2.877096] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.884658] Uniform CD-ROM driver Revision: 3.20
[ 2.889424] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.895033] Freeing unused kernel memory: 772k freed
[ 2.900178] Write protecting the kernel read-only data: 7536k
Red Hat nash version 5.1.19.6 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
[ 3.155403] usb 3-2: new low speed USB device using uhci_hcd and address 3
Creating block device nodes.
Loading megaraid_sas.ko module
[ 3.170189] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
[ 3.177213] megasas: 0x1000:0x0060:0x1014:0x0364: bus 1:slot 0:func 0
[ 3.183795] megaraid_sas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.191639] megasas: FW now in Ready state
[ 3.243381] scsi4 : LSI SAS based MegaRAID driver
Loading shpchp.k[ 3.248909] scsi 4:0:0:0: Direct-Access IBM-ESXS CBRCA146C3ETS0 N C274 PQ: 0 ANSI: 6
o module
[ 3.250185] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Loading dm-zero.[ 3.266049] scsi 4:0:1:0: Direct-Access IBM-ESXS CBRCA146C3ETS0 N C274 PQ: 0 ANSI: 6
ko module
[ 3.275587] scsi 4:0:2:0: Direct-Access IBM-ESXS CBRCA146C3ETS0 N C274 PQ: 0 ANSI: 6
Scanning and configuring dmraid supported devices
Scanning logical volumes
Reading all physical volumes. This may take a while...
Activating logical volum[ 3.296880] scsi 4:2:0:0: Direct-Access IBM ServeRAID-MR10i 1.40 PQ: 0 ANSI: 5
es
Volume group "VolGroup01" not found
Trying to resume from /dev/VolGroup01/LogVol01
[ 3.314763] sd 4:2:0:0: Attached scsi generic sg1 type 0
[ 3.320292] sd 4:2:0:0: [sda] 570310656 512-byte logical blocks: (291 GB/271 GiB)
[ 3.328123] sd 4:2:0:0: [sda] Write Protect is off
[ 3.333049] sd 4:2:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
Unable to access[ 3.342502] sda: resume device ( sda1/dev/VolGroup01/ sda2LogVol01)
Creat
ing root device.[ 3.351063] sd 4:2:0:0: [sda] Attached SCSI disk
Mounting root filesystem.
[ 3.396133] usb 3-2: configuration #1 chosen from 1 choice
mount: could not find filesystem '/dev/root'
Setting up other filesystems.
Setting up new root fs
setuproot: moving /dev failed: No such file or directory
no fstab.sys, mounting internal defaults
setuproot: error mounting /proc: No such file or directory
setuproot: error mounting /sys: No such file or directory
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
switchroot: mount failed: No such file or directory
[ 3.466953] Kernel panic - not syncing: Attempted to kill init!
[ 3.472991] Pid: 1, comm: init Not tainted 2.6.32.13 #2
[ 3.478335] Call Trace:
[ 3.480849] [<ffffffff8105ab80>] panic+0xa0/0x180
[ 3.485760] [<ffffffff810b5d80>] ? call_rcu_sched+0x10/0x20
[ 3.491536] [<ffffffff810b5d99>] ? call_rcu+0x9/0x10
[ 3.496708] [<ffffffff8105c9bc>] ? put_files_struct+0x7c/0xd0
[ 3.502660] [<ffffffff81065af3>] ? exit_ptrace+0x33/0x130
[ 3.508261] [<ffffffff8105ec53>] do_exit+0x743/0x7f0
[ 3.513433] [<ffffffff8105ed3c>] do_group_exit+0x3c/0xa0
[ 3.518950] [<ffffffff8105edb2>] sys_exit_group+0x12/0x20
[ 3.524562] [<ffffffff81013dc2>] system_call_fastpath+0x16/0x1b
---------------------
and this is working case below, xen-unstable + 2.6.18.8, but it doesn't detect my network card, still..
kernel /xen-4.1-unstable.gz
module /vmlinuz-2.6.18.8-xen ro root=/dev/VolGroup01/LogVol00
module /initrd-2.6.18.8-xen.img
----------------------
__ __ _ _ _ _ _ _
\ \/ /___ _ __ | || | / | _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ | || |_ | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | |__ _|| |__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |_|(_)_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 4.1-unstable (root@research.avayalabs.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) Tue May 25 11:01:01 EDT 2010
(XEN) Latest ChangeSet: Sat May 22 06:36:41 2010 +0100 21446:93410e5e4ad8
(XEN) Command line: console=vga,com1 com1=115200,8n1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009c400 (usable)
(XEN) 000000000009c400 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000007d93e000 (usable)
(XEN) 000000007d93e000 - 000000007d9ee000 (reserved)
(XEN) 000000007d9ee000 - 000000007f68f000 (usable)
(XEN) 000000007f68f000 - 000000007f6df000 (reserved)
(XEN) 000000007f6df000 - 000000007f7df000 (ACPI NVS)
(XEN) 000000007f7df000 - 000000007f7ff000 (ACPI data)
(XEN) 000000007f7ff000 - 000000007f800000 (usable)
(XEN) 000000007f800000 - 0000000090000000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
(XEN) 00000000ff800000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000380000000 (usable)
(XEN) ACPI: RSDP 000FDFD0, 0024 (r2 IBM )
(XEN) ACPI: XSDT 7F7FE120, 007C (r1 IBM THURLEY 0 1000013)
(XEN) ACPI: FACP 7F7FB000, 00F4 (r4 IBM THURLEY 0 IBM 1000013)
(XEN) ACPI: DSDT 7F7F8000, 2885 (r1 IBM THURLEY 3 IBM 1000013)
(XEN) ACPI: FACS 7F735000, 0040
(XEN) ACPI: TCPA 7F7FD000, 0064 (r0 0 0)
(XEN) ACPI: APIC 7F7F7000, 00DE (r2 IBM THURLEY 0 IBM 1000013)
(XEN) ACPI: MCFG 7F7F6000, 003C (r1 IBM THURLEY 1 IBM 1000013)
(XEN) ACPI: SLIC 7F7F5000, 0176 (r1 IBM THURLEY 0 IBM 1000013)
(XEN) ACPI: HPET 7F7F4000, 0038 (r1 IBM THURLEY 1 IBM 1000013)
(XEN) ACPI: SSDT 7F7F3000, 0113 (r2 IBM CPUSCOPE 4000 IBM 1000013)
(XEN) ACPI: SSDT 7F7F2000, 051C (r2 IBM PSTATEPM 4000 IBM 1000013)
(XEN) ACPI: SSDT 7F7F1000, 0362 (r2 IBM CPUCSTAT 4000 IBM 1000013)
(XEN) ACPI: ERST 7F7F0000, 0230 (r1 IBM THURLEY 1 IBM 1000013)
(XEN) ACPI: DMAR 7F7EF000, 00C8 (r1 IBM THURLEY 1 IBM 1000013)
(XEN) System RAM: 12277MB (12572144kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000380000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 0009c540
(XEN) DMI 2.5 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x588
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[584,0], pm1x_evt[580,0]
(XEN) ACPI: wakeup_vec[7f73500c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
(XEN) Processor #2 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
(XEN) Processor #4 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
(XEN) Processor #6 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x01] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x03] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x05] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x07] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x11] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x13] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x15] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
(XEN) ACPI: HPET id: 0x8086a301 base: 0xfed00000
(XEN) PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
(XEN) PCI: MCFG area at 80000000 reserved in E820
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2266.804 MHz processor.
(XEN) Initing memory sharing.
(XEN) Intel machine check reporting enabled
(XEN) Intel VT-d Snoop Control supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation supported.
(XEN) Intel VT-d Interrupt Remapping supported.
(XEN) I/O virtualisation enabled
(XEN) I/O virtualisation for PV guests disabled
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 14.318MHz HPET
ÿ(XEN) Allocated console ring of 32 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) EPT supports 2M super page.
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Brought up 4 CPUs
(XEN) tmem: initialized comp=0 dedup=0 tze=0 global-lock=0
(XEN) HPET's MSI mode hasn't been supported when Interrupt Remapping is enabled.
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0xffffffff80200000 memsz=0x268898
(XEN) elf_parse_binary: phdr: paddr=0xffffffff80469000 memsz=0x8c928
(XEN) elf_parse_binary: phdr: paddr=0xffffffff804f6000 memsz=0xc08
(XEN) elf_parse_binary: phdr: paddr=0xffffffff804f8000 memsz=0xd008c
(XEN) elf_parse_binary: memory: 0xffffffff80200000 -> 0xffffffff805c808c
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff80200000
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80205000
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: FEATURES = "writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xffffffff80000000
(XEN) elf_paddr_offset = 0xffffffff80000000
(XEN) virt_offset = 0x0
(XEN) virt_kstart = 0xffffffff80200000
(XEN) virt_kend = 0xffffffff805c808c
(XEN) virt_entry = 0xffffffff80200000
(XEN) p2m_base = 0xffffffffffffffff
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 -> 0xffffffff805c808c
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000370000000->0000000374000000 (3051547 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff805c808c
(XEN) Init. ramdisk: ffffffff805c9000->ffffffff80d45a00
(XEN) Phys-Mach map: ffffffff80d46000->ffffffff824ae0d8
(XEN) Start info: ffffffff824af000->ffffffff824af4b4
(XEN) Page tables: ffffffff824b0000->ffffffff824c7000
(XEN) Boot stack: ffffffff824c7000->ffffffff824c8000
(XEN) TOTAL: ffffffff80000000->ffffffff82800000
(XEN) ENTRY ADDRESS: ffffffff80200000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff80200000 -> 0xffffffff80468898
(XEN) elf_load_binary: phdr 1 at 0xffffffff80469000 -> 0xffffffff804f5928
(XEN) elf_load_binary: phdr 2 at 0xffffffff804f6000 -> 0xffffffff804f6c08
(XEN) elf_load_binary: phdr 3 at 0xffffffff804f8000 -> 0xffffffff80533188
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 200kB init memory.
kernel direct mapping tables up to 2ed81b000 @ 24d2000-3c4c000
Bootdata ok (command line is ro root=/dev/VolGroup01/LogVol00 console=tty0 console=ttyS0,115200)
Linux version 2.6.18.8-xen (root@vmphone210.research.avayalabs.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Tue May 25 13:41:49 EDT 2010
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000002ed81b000 (usable)
DMI 2.5 present.
No mptable found.
>>> ERROR: Invalid checksum
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x11] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x13] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x15] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 98000000 (gap: 90000000:6ec00000)
Built 1 zonelists. Total pages: 3028007
Kernel command line: ro root=/dev/VolGroup01/LogVol00 console=tty0 console=ttyS0,115200
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 2266.804 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: ffff88001004c000 - ffff88001404c000
Address size: 27 bits
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 11952096k/12279916k available (2046k kernel code, 318880k reserved, 900k data, 180k init)
Calibrating delay using timer specific routine.. 4540.92 BogoMIPS (lpj=22704630)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
MCE: warning: using only 9 banks
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
SMP alternatives: switching to SMP code
Initializing CPU#1
Initializing CPU#2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
MCE: warning: using only 9 banks
Brought up 4 CPUs
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
MCE: warning: using only 9 banks
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
MCE: warning: using only 9 banks
migration_cost=78
checking if image is initramfs... it is
Freeing initrd memory: 7666k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
(XEN) io_apic.c:2296:
(XEN) ioapic_guest_write: apic=0, pin=4, irq=4
(XEN) ioapic_guest_write: new_entry=000109f1
(XEN) ioapic_guest_write: old_entry=000009f1 pirq=4
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
pnp: PnP ACPI: found 13 devices
xen_mem: Initialising balloon driver.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:06: ioport range 0x400-0x43f has been reserved
pnp: 00:06: ioport range 0x440-0x45f has been reserved
pnp: 00:0b: ioport range 0xca0-0xca1 has been reserved
pnp: 00:0b: ioport range 0xca4-0xca9 has been reserved
pnp: 00:0b: ioport range 0xcaa-0xcab has been reserved
pnp: 00:0b: ioport range 0xcac-0xccb has been reserved
pnp: 00:0c: ioport range 0xca2-0xca2 has been reserved
pnp: 00:0c: ioport range 0xca3-0xca3 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: 96000000-99ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: 92000000-95ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: 1000-1fff
MEM window: 9b900000-9b9fffff
PREFETCH window: 9bb00000-9bbfffff
PCI: Ignore bogus resource 6 [0:0] of 0000:07:00.0
PCI: Bridge: 0000:06:00.0
IO window: disabled.
MEM window: 9b000000-9b8fffff
PREFETCH window: 9a000000-9affffff
PCI: Bridge: 0000:00:1c.4
IO window: disabled.
MEM window: 9b000000-9b8fffff
PREFETCH window: 9a000000-9affffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
GSI 16 sharing vector 0x10 and IRQ 16
(XEN) allocated vector a0 for irq 28
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 28 (level, low) -> IRQ 16
GSI 17 sharing vector 0x11 and IRQ 17
(XEN) allocated vector a8 for irq 29
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 29 (level, low) -> IRQ 17
GSI 18 sharing vector 0x12 and IRQ 18
(XEN) allocated vector b0 for irq 24
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 24 (level, low) -> IRQ 18
GSI 19 sharing vector 0x13 and IRQ 19
(XEN) allocated vector b8 for irq 30
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 30 (level, low) -> IRQ 19
GSI 20 sharing vector 0x14 and IRQ 20
(XEN) allocated vector c0 for irq 16
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 20
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14a-xen <tigran@veritas.com>
audit: initializing netlink socket (disabled)
audit(1274975666.567:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Non-volatile memory driver v1.2
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Xen virtual console successfully installed as xvc0
Event-channel device installed.
blktap_device_init: blktap device major 254
blktap_ring_init: blktap ring major: 253
netfront: Initialising virtual ethernet driver.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.5
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
NET: Registered protocol family 17
PCI IO multiplexer device installed.
ACPI: (supports S0 S1 S5)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 180k freed
usbcore: no version for "struct_module" found: kernel tainted.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
(XEN) PCI add device 00:1a.7
GSI 21 sharing vector 0x15 and IRQ 21
(XEN) allocated vector c8 for irq 19
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 19 (level, low) -> IRQ 21
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: irq 21, io mem 0x9ba21400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
(XEN) PCI add device 00:1d.7
GSI 22 sharing vector 0x16 and IRQ 22
(XEN) allocated vector d0 for irq 17
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 17 (level, low) -> IRQ 22
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: irq 22, io mem 0x9ba21000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v3.0
(XEN) PCI add device 00:1a.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 17 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 22, io base 0x000020a0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
(XEN) PCI add device 00:1a.1
GSI 23 sharing vector 0x17 and IRQ 23
(XEN) allocated vector d8 for irq 18
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 18 (level, low) -> IRQ 23
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 23, io base 0x00002080
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
(XEN) PCI add device 00:1d.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 22, io base 0x00002060
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
(XEN) PCI add device 00:1d.1
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 18 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 23, io base 0x00002040
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
(XEN) PCI add device 00:1d.2
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 21, io base 0x00002020
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
SCSI subsystem initialized
megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006
(XEN) PCI add device 01:00.0
megasas: 0x1000:0x0060:0x1014:0x0364: bus 1:slot 0:func 0
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
scsi0 : LSI Logic SAS based MegaRAID driver
Vendor: IBM-ESXS Model: CBRCA146C3ETS0 N Rev: C274
Type: Direct-Access ANSI SCSI revision: 06
Vendor: IBM-ESXS Model: CBRCA146C3ETS0 N Rev: C274
Type: Direct-Access ANSI SCSI revision: 06
Vendor: IBM-ESXS Model: CBRCA146C3ETS0 N Rev: C274
Type: Direct-Access ANSI SCSI revision: 06
Vendor: IBM Model: ServeRAID-MR10i Rev: 1.40
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 570310656 512-byte hdwr sectors (291999 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back, no read (daft)
SCSI device sda: 570310656 512-byte hdwr sectors (291999 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back, no read (daft)
sda: sda1 sda2
sd 0:2:0:0: Attached scsi disk sda
(XEN) PCI add device 00:1f.2
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 16 (level, low) -> IRQ 20
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x20F0 irq 14
scsi1 : ata_piix
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
ata1.00: ATAPI, max UDMA/100
ata1.00: configured for UDMA/100
Vendor: TSSTcorp Model: CDDVDW TS-L633B Rev: IB03
Type: CD-ROM ANSI SCSI revision: 05
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x20F8 irq 15
scsi2 : ata_piix
usb 3-2: new low speed USB device using uhci_hcd and address 3
ATA: abnormal status 0x7F on port 0x177
(XEN) PCI add device 00:1f.5
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
GSI 24 sharing vector 0x18 and IRQ 24
(XEN) allocated vector 21 for irq 21
ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 21 (level, low) -> IRQ 24
ata3: SATA max UDMA/133 cmd 0x2108 ctl 0x2126 bmdma 0x20D0 irq 24
ata4: SATA max UDMA/133 cmd 0x2100 ctl 0x2122 bmdma 0x20D8 irq 24
scsi3 : ata_piix
usb 3-2: configuration #1 chosen from 1 choice
ATA: abnormal status 0x7F on port 0x210F
scsi4 : ata_piix
ATA: abnormal status 0x7F on port 0x2107
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
usb 5-2: new full speed USB device using uhci_hcd and address 2
usb 5-2: configuration #1 chosen from 2 choices
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
(XEN) PCI add device 00:1f.3
(XEN) allocated vector 29 for irq 22
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
(XEN) no cpu_id for acpi_id 4
(XEN) no cpu_id for acpi_id 5
(XEN) no cpu_id for acpi_id 6
(XEN) no cpu_id for acpi_id 7
(XEN) no cpu_id for acpi_id 8
(XEN) no cpu_id for acpi_id 9
(XEN) no cpu_id for acpi_id 10
(XEN) no cpu_id for acpi_id 11
(XEN) no cpu_id for acpi_id 12
(XEN) no cpu_id for acpi_id 13
(XEN) no cpu_id for acpi_id 14
(XEN) no cpu_id for acpi_id 15
Bridge firewalling registered
(XEN) *** Serial input -> Xen (type 'CTRL-a' three times to switch input to DOM0)
(XEN) 'h' pressed -> showing installed handlers
(XEN) key '%' (ascii '25') => trap to xendbg
(XEN) key '*' (ascii '2a') => print all diagnostics
(XEN) key '0' (ascii '30') => dump Dom0 registers
(XEN) key 'A' (ascii '41') => toggle alternative key handling
(XEN) key 'C' (ascii '43') => trigger a crashdump
(XEN) key 'D' (ascii '44') => dump ept p2m table
(XEN) key 'H' (ascii '48') => dump heap info
(XEN) key 'M' (ascii '4d') => dump MSI state
(XEN) key 'N' (ascii '4e') => trigger an NMI
(XEN) key 'O' (ascii '4f') => toggle shadow audits
(XEN) key 'Q' (ascii '51') => dump PCI devices
(XEN) key 'R' (ascii '52') => reboot machine
(XEN) key 'S' (ascii '53') => reset shadow pagetables
(XEN) key 'V' (ascii '56') => dump iommu info
(XEN) key 'a' (ascii '61') => dump timer queues
(XEN) key 'c' (ascii '63') => dump ACPI Cx structures
(XEN) key 'd' (ascii '64') => dump registers
(XEN) key 'e' (ascii '65') => dump evtchn info
(XEN) key 'g' (ascii '67') => print grant table usage
(XEN) key 'h' (ascii '68') => show this message
(XEN) key 'i' (ascii '69') => dump interrupt bindings
(XEN) key 'm' (ascii '6d') => memory info
(XEN) key 'n' (ascii '6e') => NMI statistics
(XEN) key 'q' (ascii '71') => dump domain (and guest debug) info
(XEN) key 'r' (ascii '72') => dump run queues
(XEN) key 's' (ascii '73') => dump softtsc stats
(XEN) key 't' (ascii '74') => display multi-cpu clock info
(XEN) key 'u' (ascii '75') => dump numa info
(XEN) key 'v' (ascii '76') => dump Intel's VMCS
(XEN) key 'z' (ascii '7a') => print ioapic info
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 9+ messages in thread