From: Jean Baptiste Favre <xen-devel@jbfavre.org>
To: xen-devel@lists.xensource.com
Subject: Re: PCI passthrough issue
Date: Wed, 02 Feb 2011 12:33:04 +0100 [thread overview]
Message-ID: <4D4940F0.602@jbfavre.org> (raw)
In-Reply-To: <1296644379.13091.368.camel@zakaz.uk.xensource.com>
[-- Attachment #1: Type: text/plain, Size: 2831 bytes --]
Hello,
Le 02/02/2011 11:59, Ian Campbell a écrit :
> [...]
> >>> No sure I've ever posted that logs. But I can redo my tests :)
> >>
> >> yes, please do that.
> > Please find attached both console startup logs with 256M and 512M:
> > 256M_domU_console_logs.txt
> > 512M_domU_console_logs.txt
>
> Thanks, I stripped the timestamps and cleaned up some differences due to
> missing carriage returns, those versions are attached.
>
> Interesting bits of diff (- == 256, + == 512) are:
> -Allocating PCI resources starting at 10800000 (gap:
> 10800000:ef800000)
> +Allocating PCI resources starting at 20800000 (gap:
> 20800000:df800000)
>
> So the PCI resources are higher and smaller in the 512MB case.
>
> -Placing 64MB software IO TLB between cbd7ee40 - cfd7ee40
> -software IO TLB at phys 0xbd7ee40 - 0xfd7ee40
> +Placing 64MB software IO TLB between dbb1a000 - dfb1a000
> +software IO TLB at phys 0x1bb1a000 - 0x1fb1a000
>
> Fair enough?
>
> sky2: driver version 1.28
> -sky2 0000:00:00.0: BAR 0: set to [mem 0xfeb00000-0xfeb03fff
> 64bit] (PCI address [0xfeb00000-0xfeb03fff])
> -sky2 0000:00:00.0: BAR 2: set to [io 0xe800-0xe8ff] (PCI
> address [0xe800-0xe8ff])
> -sky2 0000:00:00.0: enabling device (0000 -> 0003)
> sky2 0000:00:00.0: Xen PCI enabling IRQ: 18
> sky2 0000:00:00.0: Yukon-2 EC Ultra chip revision 3
> sky2 0000:00:00.0: eth0: addr 00:1f:c6:eb:71:43
>
> So there is some sort of remapping going on in the 256MB case? (or the
> 512MB logs are missing a bit, which can happen). Can you post the
> content of domU's /proc/{interrupts,iomem,ioports} for both cases?
Please find them attached.
I also join last full console logs for both 256M and 512M: I saw "Call
Trace" for 256M I did not had last time.
> >> Please can you also collect and post the information from ifconfig and
> >> ethtool -S which I asked for earlier.
> > Attached as well:
> > 256_domU_ifconfig_ping_ethtool.txt
> > 512_domU_ifconfig_ping_ethtool.txt
>
> Thanks. The interesting bit here is that the 256MB case is registering
> RX dropped frames. 512_domU_ifconfig_ping_ethtool.txt did not include an
> ifconfig after the experiment but I assume the dropped frames are not
> present there.
I did not include second ifconfig for 512M as ping always works with
512M memory.
As far as I can remember, I did not noticed anything special.
> The rx_dropped statistic is only cranked in a small number of places,
> once in the driver and a handful in the networking core, only one of the
> core cases looks likely to be relevant. The following patch should help
> us figure out where the frames are dropped...
Let's patch Debian 2.6.37 32bits kernel so :)
Regards,
JB
[-- Attachment #2: 256M_domU_proc_outputs.txt --]
[-- Type: text/plain, Size: 1733 bytes --]
# cat /proc/interrupts
CPU0
55: 8 xen-pirq-pcifront-msi sky2@pci:0000:00:00.0
1271: 946 xen-dyn-event blkif
1272: 133 xen-dyn-event hvc_console
1273: 0 xen-dyn-event pcifront
1274: 259 xen-dyn-event xenbus
1275: 0 xen-percpu-ipi callfuncsingle0
1276: 0 xen-percpu-virq debug0
1277: 0 xen-percpu-ipi callfunc0
1278: 0 xen-percpu-ipi resched0
1279: 761 xen-percpu-virq timer0
NMI: 0 Non-maskable interrupts
LOC: 0 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 0 Performance monitoring interrupts
IWI: 0 IRQ work interrupts
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 0 Machine check polls
ERR: 0
MIS: 0
# cat /proc/iomem
00000000-0000ffff : reserved
00010000-0009ffff : System RAM
000a0000-000fffff : reserved
000f0000-000fffff : System ROM
00100000-107fffff : System RAM
01000000-012a3d3f : Kernel code
012a3d40-014046df : Kernel data
01470000-015215ab : Kernel bss
feb00000-feb03fff : 0000:00:00.0
feb00000-feb03fff : sky2
# cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0071 : rtc_cmos
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
e800-e8ff : 0000:00:00.0
e800-e8ff : sky2
[-- Attachment #3: 512M_domU_console_logs_2.txt --]
[-- Type: text/plain, Size: 15584 bytes --]
# xm create /cluster/xen/xps-106.cfg -c
Using config file "/cluster/xen/xps-106.cfg".
[219194.082018] pciback 0000:04:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
Started domain xps-106 (id=25)
(XEN) traps.c:2308:d25 Domain attempted WRMSR 00000000c0010004 from 0000c0b2:cbfa8461 to 00000000:0000abcd.
[ 0.000000] Reserving virtual address space above 0xf5800000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.37-trunk-686-bigmem (Debian 2.6.37-1~experimental.1) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-10) ) #1 SMP Thu Jan 6 15:21:44 UTC 2011
[ 0.000000] ACPI in unprivileged domain disabled
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000020800000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI not present or invalid.
[ 0.000000] last_pfn = 0x20800 max_arch_pfn = 0x1000000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000020800000
[ 0.000000] RAMDISK: 01793000 - 02ecc000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 520MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 20800000
[ 0.000000] low ram: 0 - 20800000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00020800
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00020800
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20800000 (gap: 20800000:df800000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.1 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @dfbde000 s30336 r0 d22912 u53248
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 131968
[ 0.000000] Kernel command line: root=/dev/mapper/xps--106-root ro iommu=soft swiotlb=force console=hvc0 xencons=tty
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Placing 64MB software IO TLB between dbb1a000 - dfb1a000
[ 0.000000] software IO TLB at phys 0x1bb1a000 - 0x1fb1a000
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 422200k/532480k available (2703k kernel code, 109832k reserved, 1410k data, 412k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xf5536000 - 0xf57ff000 (2852 kB)
[ 0.000000] pkmap : 0xf5200000 - 0xf5400000 (2048 kB)
[ 0.000000] vmalloc : 0xe1000000 - 0xf51fe000 ( 321 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0800000 ( 520 MB)
[ 0.000000] .init : 0xc1405000 - 0xc146c000 ( 412 kB)
[ 0.000000] .data : 0xc12a3d40 - 0xc14046e0 (1410 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12a3d40 (2703 kB)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 2506.222 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5012.44 BogoMIPS (lpj=10024888)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys devices
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] Initializing cgroup subsys blkio
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] Performance Events:
[ 0.004000] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.004000] no hardware sampling interrupt available.
[ 0.004000] Broken PMU hardware detected, software events only.
[ 0.004000] SMP alternatives: switching to UP code
[ 0.014434] Freeing SMP alternatives: 16k freed
[ 0.014650] NMI watchdog disabled for cpu0: unable to create perf event: -2
[ 0.014726] Brought up 1 CPUs
[ 0.014806] devtmpfs: initialized
[ 0.015100] Grant table initialized
[ 0.015107] regulator: core version 0.5
[ 0.015161] regulator: dummy:
[ 0.015207] NET: Registered protocol family 16
[ 0.015410] PCI: setting up Xen PCI frontend stub
[ 0.016503] bio: create slab <bio-0> at 0
[ 0.016570] ACPI: Interpreter disabled.
[ 0.016596] xen_balloon: Initialising balloon driver.
[ 0.016596] last_pfn = 0x20800 max_arch_pfn = 0x1000000
[ 0.016596] vgaarb: loaded
[ 0.016596] PCI: System does not support PCI
[ 0.016596] PCI: System does not support PCI
[ 0.016596] Switching to clocksource xen
[ 0.017420] pnp: PnP ACPI: disabled
[ 0.017427] PnPBIOS: Disabled
[ 0.019619] NET: Registered protocol family 2
[ 0.019667] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.019847] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.019964] TCP bind hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.020091] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.020098] TCP reno registered
[ 0.020104] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.020119] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.020217] NET: Registered protocol family 1
[ 0.020275] Unpacking initramfs...
[ 0.046676] Freeing initrd memory: 23780k freed
[ 0.054687] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.054923] audit: initializing netlink socket (disabled)
[ 0.054940] type=2000 audit(1296645473.960:1): initialized
[ 0.063287] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.065699] VFS: Disk quotas dquot_6.5.2
[ 0.065764] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.065859] msgmni has been set to 871
[ 0.066056] alg: No test for stdrng (krng)
[ 0.066121] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.066130] io scheduler noop registered
[ 0.066136] io scheduler deadline registered
[ 0.066153] io scheduler cfq registered (default)
[ 0.163208] isapnp: Scanning for PnP cards...
[ 0.515462] isapnp: No Plug & Play device found
[ 0.520929] Linux agpgart interface v0.103
[ 0.521028] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.521307] PNP: No PS/2 controller found. Probing ports directly.
[ 0.522128] i8042.c: No controller found.
[ 0.522198] mice: PS/2 mouse device common for all mice
[ 0.522291] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.522342] rtc_cmos: probe of rtc_cmos failed with error -38
[ 0.522368] cpuidle: using governor ladder
[ 0.522373] cpuidle: using governor menu
[ 0.522627] pcifront pci-0: Installing PCI frontend
[ 0.522639] TCP cubic registered
[ 0.522804] NET: Registered protocol family 10
[ 0.522843] pcifront pci-0: Creating PCI Frontend Bus 0000:00
[ 0.527895] pcifront pci-0: claiming resource 0000:00:00.0/0
[ 0.527904] pcifront pci-0: claiming resource 0000:00:00.0/2
[ 0.528255] lo: Disabled Privacy Extensions
[ 0.528454] Mobile IPv6
[ 0.528460] NET: Registered protocol family 17
[ 0.528468] Registering the dns_resolver key type
[ 0.528502] Using IPI No-Shortcut mode
[ 0.528608] registered taskstats version 1
[ 0.628031] XENBUS: Device with no driver: device/vbd/51712
[ 0.628040] XENBUS: Device with no driver: device/console/0
[ 0.628061] /build/buildd-linux-2.6_2.6.37-1~experimental.1-i386-rePuD0/linux-2.6-2.6.37/debian/build/source_i386_none/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 0.628086] Initalizing network drop monitor service
[ 0.628172] Freeing unused kernel memory: 412k freed
[ 0.628969] Write protecting the kernel text: 2704k
[ 0.629233] Write protecting the kernel read-only data: 1016k
Loading, please wait...
[ 0.660285] udev[46]: starting version 164
[ 0.725951] sky2: driver version 1.28
[ 0.741101] sky2 0000:00:00.0: BAR 0: set to [mem 0xfeb00000-0xfeb03fff 64bit] (PCI address [0xfeb00000-0xfeb03fff])
[ 0.741187] sky2 0000:00:00.0: BAR 2: set to [io 0xe800-0xe8ff] (PCI address [0xe800-0xe8ff])
[ 0.741258] sky2 0000:00:00.0: enabling device (0000 -> 0003)
[ 0.741382] sky2 0000:00:00.0: Xen PCI enabling IRQ: 18
[ 0.741554] sky2 0000:00:00.0: Yukon-2 EC Ultra chip revision 3
[ 0.742751] sky2 0000:00:00.0: eth0: addr 00:1f:c6:eb:71:43
[ 0.751244] blkfront: xvda: barriers enabled
[ 0.753096] xvda: xvda1 xvda2
[ 0.871721] ------------[ cut here ]------------
[ 0.871737] WARNING: at /build/buildd-linux-2.6_2.6.37-1~experimental.1-i386-rePuD0/linux-2.6-2.6.37/debian/build/source_i386_none/block/blk-core.c:337 blk_start_queue+0x1d/0x31()
[ 0.871750] Modules linked in: sky2 xen_blkfront
[ 0.871763] Pid: 0, comm: swapper Not tainted 2.6.37-trunk-686-bigmem #1
[ 0.871769] Call Trace:
[ 0.871778] [<c1036005>] ? warn_slowpath_common+0x6a/0x7b
[ 0.871785] [<c1139fd9>] ? blk_start_queue+0x1d/0x31
[ 0.871792] [<c1036023>] ? warn_slowpath_null+0xd/0x10
[ 0.871800] [<c1139fd9>] ? blk_start_queue+0x1d/0x31
[ 0.871808] [<e102a723>] ? kick_pending_request_queues+0x19/0x27 [xen_blkfront]
[ 0.871817] [<e102a925>] ? blkif_interrupt+0x1c8/0x1e3 [xen_blkfront]
[ 0.871827] [<c10753dc>] ? handle_IRQ_event+0x45/0xef
[ 0.871835] [<c1076c3d>] ? handle_fasteoi_irq+0x80/0xb1
[ 0.871843] [<c11a85d1>] ? __xen_evtchn_do_upcall+0xd0/0x155
[ 0.871851] [<c11a8cce>] ? xen_evtchn_do_upcall+0x18/0x26
[ 0.871858] [<c1009117>] ? xen_do_upcall+0x7/0xc
[ 0.871865] [<c10023a7>] ? hypercall_page+0x3a7/0x1001
[ 0.871873] [<c1006246>] ? xen_safe_halt+0xf/0x1b
[ 0.871879] [<c100e276>] ? default_idle+0x3f/0x5d
[ 0.871886] [<c1007dc4>] ? cpu_idle+0x98/0xdc
[ 0.871893] [<c14058a0>] ? start_kernel+0x320/0x325
[ 0.871900] [<c1407479>] ? xen_start_kernel+0x5a1/0x5a8
[ 0.871907] [<c1409046>] ? trap_init+0x1fe/0x367
[ 0.871913] ---[ end trace 4924792c31d7209b ]---
[ 0.871919] ------------[ cut here ]------------
[ 0.871925] WARNING: at /build/buildd-linux-2.6_2.6.37-1~experimental.1-i386-rePuD0/linux-2.6-2.6.37/debian/build/source_i386_none/block/blk-core.c:245 blk_remove_plug+0x1d/0x78()
[ 0.871937] Modules linked in: sky2 xen_blkfront
[ 0.871948] Pid: 0, comm: swapper Tainted: G W 2.6.37-trunk-686-bigmem #1
[ 0.871955] Call Trace:
[ 0.871960] [<c1036005>] ? warn_slowpath_common+0x6a/0x7b
[ 0.871967] [<c1139e6e>] ? blk_remove_plug+0x1d/0x78
[ 0.871974] [<c1036023>] ? warn_slowpath_null+0xd/0x10
[ 0.871981] [<c1139e6e>] ? blk_remove_plug+0x1d/0x78
[ 0.871990] [<c1139ed1>] ? __blk_run_queue+0x8/0x5b
[ 0.871997] [<e102a723>] ? kick_pending_request_queues+0x19/0x27 [xen_blkfront]
[ 0.872007] [<e102a925>] ? blkif_interrupt+0x1c8/0x1e3 [xen_blkfront]
[ 0.872015] [<c10753dc>] ? handle_IRQ_event+0x45/0xef
[ 0.872022] [<c1076c3d>] ? handle_fasteoi_irq+0x80/0xb1
[ 0.872029] [<c11a85d1>] ? __xen_evtchn_do_upcall+0xd0/0x155
[ 0.872037] [<c11a8cce>] ? xen_evtchn_do_upcall+0x18/0x26
[ 0.872044] [<c1009117>] ? xen_do_upcall+0x7/0xc
[ 0.872050] [<c10023a7>] ? hypercall_page+0x3a7/0x1001
[ 0.872057] [<c1006246>] ? xen_safe_halt+0xf/0x1b
[ 0.872063] [<c100e276>] ? default_idle+0x3f/0x5d
[ 0.872071] [<c1007dc4>] ? cpu_idle+0x98/0xdc
[ 0.872078] [<c14058a0>] ? start_kernel+0x320/0x325
[ 0.872087] [<c1407479>] ? xen_start_kernel+0x5a1/0x5a8
[ 0.872098] [<c1409046>] ? trap_init+0x1fe/0x367
[ 0.872104] ---[ end trace 4924792c31d7209c ]---
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... [ 0.986899] device-mapper: uevent: version 1.0.3
[ 0.987478] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
done.
Begin: Running /scripts/local-premount ... done.
[ 1.121342] EXT3-fs: barriers not enabled
[ 1.121674] kjournald starting. Commit interval 5 seconds
[ 1.121691] EXT3-fs (dm-0): mounted filesystem with ordered data mode
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd[ 1.897070] udev[161]: starting version 164
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 2.183288] input: PC Speaker as /devices/platform/pcspkr/input/input0
done.
Activating swap...done.
[ 5.581677] EXT3-fs (dm-0): warning: maximal mount count reached, running e2fsck is recommended
[ 5.624960] EXT3-fs (dm-0): using internal journal
Loading kernel modules...done.
Cleaning up ifupdown....
Setting up networking....
Activating lvm and md swap...done.
Checking file systems...fsck from util-linux-ng 2.17.2
done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Cleaning up temporary files....
Setting kernel variables ...done.
Configuring network interfaces...[ 6.098215] sky2 0000:00:00.0: eth0: enabling interface
[ 6.098298] ADDRCONF(NETDEV_UP): eth0: link is not ready
done.
Cleaning up temporary files....
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.
Starting enhanced syslogd: rsyslogd.
Starting periodic command scheduler: cron.
Debian GNU/Linux 6.0 xps-106 hvc0
xps-106 login: [ 8.916909] sky2 0000:00:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both
[ 8.916977] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[-- Attachment #4: 512M_domU_proc_outputs.txt --]
[-- Type: text/plain, Size: 1733 bytes --]
# cat /proc/interrupts
CPU0
55: 12 xen-pirq-pcifront-msi sky2@pci:0000:00:00.0
1271: 972 xen-dyn-event blkif
1272: 139 xen-dyn-event hvc_console
1273: 1 xen-dyn-event pcifront
1274: 260 xen-dyn-event xenbus
1275: 0 xen-percpu-ipi callfuncsingle0
1276: 0 xen-percpu-virq debug0
1277: 0 xen-percpu-ipi callfunc0
1278: 0 xen-percpu-ipi resched0
1279: 1895 xen-percpu-virq timer0
NMI: 0 Non-maskable interrupts
LOC: 0 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 0 Performance monitoring interrupts
IWI: 0 IRQ work interrupts
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 0 Machine check polls
ERR: 0
MIS: 0
# cat /proc/iomem
00000000-0000ffff : reserved
00010000-0009ffff : System RAM
000a0000-000fffff : reserved
000f0000-000fffff : System ROM
00100000-207fffff : System RAM
01000000-012a3d3f : Kernel code
012a3d40-014046df : Kernel data
01470000-015215ab : Kernel bss
feb00000-feb03fff : 0000:00:00.0
feb00000-feb03fff : sky2
# cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0071 : rtc_cmos
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
e800-e8ff : 0000:00:00.0
e800-e8ff : sky2
[-- Attachment #5: 256M_domU_console_logs_2.txt --]
[-- Type: text/plain, Size: 15291 bytes --]
# xm create /cluster/xen/xps-106.cfg -c
Using config file "/cluster/xen/xps-106.cfg".
[218927.183880] pciback 0000:04:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
Started domain xps-106 (id=24)
(XEN) traps.c:2308:d24 Domain attempted WRMSR 00000000c0010004 from 0000c0b2:cbfa8461 to 00000000:0000abcd.
[ 0.000000] Reserving virtual address space above 0xf5800000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.37-trunk-686-bigmem (Debian 2.6.37-1~experimental.1) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-10) ) #1 SMP Thu Jan 6 15:21:44 UTC 2011
[ 0.000000] ACPI in unprivileged domain disabled
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000010800000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI not present or invalid.
[ 0.000000] last_pfn = 0x10800 max_arch_pfn = 0x1000000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000010800000
[ 0.000000] RAMDISK: 01793000 - 02ecc000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 264MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 10800000
[ 0.000000] low ram: 0 - 10800000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00010800
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00010800
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10800000 (gap: 10800000:ef800000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.1 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @cfddf000 s30336 r0 d22912 u53248
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 66944
[ 0.000000] Kernel command line: root=/dev/mapper/xps--106-root ro iommu=soft swiotlb=force console=hvc0 xencons=tty
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Placing 64MB software IO TLB between cbd7ee40 - cfd7ee40
[ 0.000000] software IO TLB at phys 0xbd7ee40 - 0xfd7ee40
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 163268k/270336k available (2703k kernel code, 106620k reserved, 1410k data, 412k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xf5536000 - 0xf57ff000 (2852 kB)
[ 0.000000] pkmap : 0xf5200000 - 0xf5400000 (2048 kB)
[ 0.000000] vmalloc : 0xd1000000 - 0xf51fe000 ( 577 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0800000 ( 264 MB)
[ 0.000000] .init : 0xc1405000 - 0xc146c000 ( 412 kB)
[ 0.000000] .data : 0xc12a3d40 - 0xc14046e0 (1410 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12a3d40 (2703 kB)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 2506.222 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5012.44 BogoMIPS (lpj=10024888)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys devices
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] Initializing cgroup subsys blkio
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] Performance Events:
[ 0.004000] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.004000] no hardware sampling interrupt available.
[ 0.004000] Broken PMU hardware detected, software events only.
[ 0.004000] SMP alternatives: switching to UP code
[ 0.016000] Freeing SMP alternatives: 16k freed
[ 0.016233] NMI watchdog disabled for cpu0: unable to create perf event: -2
[ 0.016345] Brought up 1 CPUs
[ 0.016428] devtmpfs: initialized
[ 0.016745] Grant table initialized
[ 0.016753] regulator: core version 0.5
[ 0.016807] regulator: dummy:
[ 0.016854] NET: Registered protocol family 16
[ 0.017058] PCI: setting up Xen PCI frontend stub
[ 0.017058] bio: create slab <bio-0> at 0
[ 0.017058] ACPI: Interpreter disabled.
[ 0.017058] xen_balloon: Initialising balloon driver.
[ 0.017058] last_pfn = 0x10800 max_arch_pfn = 0x1000000
[ 0.017058] vgaarb: loaded
[ 0.017058] PCI: System does not support PCI
[ 0.017058] PCI: System does not support PCI
[ 0.017058] Switching to clocksource xen
[ 0.017417] pnp: PnP ACPI: disabled
[ 0.017425] PnPBIOS: Disabled
[ 0.019715] NET: Registered protocol family 2
[ 0.019763] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.019948] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.020022] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.020083] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.020091] TCP reno registered
[ 0.020097] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.020107] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.020173] NET: Registered protocol family 1
[ 0.020230] Unpacking initramfs...
[ 0.046821] Freeing initrd memory: 23780k freed
[ 0.054855] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.055094] audit: initializing netlink socket (disabled)
[ 0.055112] type=2000 audit(1296645206.868:1): initialized
[ 0.063463] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.065902] VFS: Disk quotas dquot_6.5.2
[ 0.065967] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.066064] msgmni has been set to 365
[ 0.066254] alg: No test for stdrng (krng)
[ 0.066324] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.066333] io scheduler noop registered
[ 0.066338] io scheduler deadline registered
[ 0.066354] io scheduler cfq registered (default)
[ 0.066589] isapnp: Scanning for PnP cards...
[ 0.515649] isapnp: No Plug & Play device found
[ 0.521110] Linux agpgart interface v0.103
[ 0.521204] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.521479] PNP: No PS/2 controller found. Probing ports directly.
[ 0.522297] i8042.c: No controller found.
[ 0.522371] mice: PS/2 mouse device common for all mice
[ 0.522460] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.522509] rtc_cmos: probe of rtc_cmos failed with error -38
[ 0.522537] cpuidle: using governor ladder
[ 0.522543] cpuidle: using governor menu
[ 0.522819] pcifront pci-0: Installing PCI frontend
[ 0.522830] TCP cubic registered
[ 0.522998] NET: Registered protocol family 10
[ 0.523038] pcifront pci-0: Creating PCI Frontend Bus 0000:00
[ 0.539171] lo: Disabled Privacy Extensions
[ 0.539379] Mobile IPv6
[ 0.539385] NET: Registered protocol family 17
[ 0.539394] Registering the dns_resolver key type
[ 0.539411] Using IPI No-Shortcut mode
[ 0.539534] registered taskstats version 1
[ 0.541437] pcifront pci-0: claiming resource 0000:00:00.0/0
[ 0.541445] pcifront pci-0: claiming resource 0000:00:00.0/2
[ 0.636034] XENBUS: Device with no driver: device/vbd/51712
[ 0.636043] XENBUS: Device with no driver: device/console/0
[ 0.636064] /build/buildd-linux-2.6_2.6.37-1~experimental.1-i386-rePuD0/linux-2.6-2.6.37/debian/build/source_i386_none/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 0.636089] Initalizing network drop monitor service
[ 0.636174] Freeing unused kernel memory: 412k freed
[ 0.636935] Write protecting the kernel text: 2704k
[ 0.637179] Write protecting the kernel read-only data: 1016k
Loading, please wait...
[ 0.668289] udev[46]: starting version 164
[ 0.719079] sky2: driver version 1.28
[ 0.719174] sky2 0000:00:00.0: Xen PCI enabling IRQ: 18
[ 0.719346] sky2 0000:00:00.0: Yukon-2 EC Ultra chip revision 3
[ 0.733989] sky2 0000:00:00.0: eth0: addr 00:1f:c6:eb:71:43
[ 0.743630] blkfront: xvda: barriers enabled
[ 0.745505] xvda: xvda1 xvda2
[ 0.865767] ------------[ cut here ]------------
[ 0.865782] WARNING: at /build/buildd-linux-2.6_2.6.37-1~experimental.1-i386-rePuD0/linux-2.6-2.6.37/debian/build/source_i386_none/block/blk-core.c:337 blk_start_queue+0x1d/0x31()
[ 0.865796] Modules linked in: sky2 xen_blkfront
[ 0.865808] Pid: 0, comm: swapper Not tainted 2.6.37-trunk-686-bigmem #1
[ 0.865815] Call Trace:
[ 0.865824] [<c1036005>] ? warn_slowpath_common+0x6a/0x7b
[ 0.865832] [<c1139fd9>] ? blk_start_queue+0x1d/0x31
[ 0.865839] [<c1036023>] ? warn_slowpath_null+0xd/0x10
[ 0.865847] [<c1139fd9>] ? blk_start_queue+0x1d/0x31
[ 0.865855] [<d102a723>] ? kick_pending_request_queues+0x19/0x27 [xen_blkfront]
[ 0.865865] [<d102a925>] ? blkif_interrupt+0x1c8/0x1e3 [xen_blkfront]
[ 0.865875] [<c10753dc>] ? handle_IRQ_event+0x45/0xef
[ 0.865883] [<c1076c3d>] ? handle_fasteoi_irq+0x80/0xb1
[ 0.865892] [<c11a85d1>] ? __xen_evtchn_do_upcall+0xd0/0x155
[ 0.865900] [<c11a8cce>] ? xen_evtchn_do_upcall+0x18/0x26
[ 0.865910] [<c1009117>] ? xen_do_upcall+0x7/0xc
[ 0.865918] [<c10023a7>] ? hypercall_page+0x3a7/0x1001
[ 0.865926] [<c1006246>] ? xen_safe_halt+0xf/0x1b
[ 0.865933] [<c100e276>] ? default_idle+0x3f/0x5d
[ 0.865940] [<c1007dc4>] ? cpu_idle+0x98/0xdc
[ 0.865948] [<c14058a0>] ? start_kernel+0x320/0x325
[ 0.865955] [<c1407479>] ? xen_start_kernel+0x5a1/0x5a8
[ 0.865962] [<c1409046>] ? trap_init+0x1fe/0x367
[ 0.865969] ---[ end trace b6935cbfedb011b5 ]---
[ 0.865974] ------------[ cut here ]------------
[ 0.865981] WARNING: at /build/buildd-linux-2.6_2.6.37-1~experimental.1-i386-rePuD0/linux-2.6-2.6.37/debian/build/source_i386_none/block/blk-core.c:245 blk_remove_plug+0x1d/0x78()
[ 0.865993] Modules linked in: sky2 xen_blkfront
[ 0.866005] Pid: 0, comm: swapper Tainted: G W 2.6.37-trunk-686-bigmem #1
[ 0.866012] Call Trace:
[ 0.866018] [<c1036005>] ? warn_slowpath_common+0x6a/0x7b
[ 0.866025] [<c1139e6e>] ? blk_remove_plug+0x1d/0x78
[ 0.866032] [<c1036023>] ? warn_slowpath_null+0xd/0x10
[ 0.866040] [<c1139e6e>] ? blk_remove_plug+0x1d/0x78
[ 0.866047] [<c1139ed1>] ? __blk_run_queue+0x8/0x5b
[ 0.866054] [<d102a723>] ? kick_pending_request_queues+0x19/0x27 [xen_blkfront]
[ 0.866064] [<d102a925>] ? blkif_interrupt+0x1c8/0x1e3 [xen_blkfront]
[ 0.866076] [<c10753dc>] ? handle_IRQ_event+0x45/0xef
[ 0.866083] [<c1076c3d>] ? handle_fasteoi_irq+0x80/0xb1
[ 0.866091] [<c11a85d1>] ? __xen_evtchn_do_upcall+0xd0/0x155
[ 0.866098] [<c11a8cce>] ? xen_evtchn_do_upcall+0x18/0x26
[ 0.866108] [<c1009117>] ? xen_do_upcall+0x7/0xc
[ 0.866115] [<c10023a7>] ? hypercall_page+0x3a7/0x1001
[ 0.866122] [<c1006246>] ? xen_safe_halt+0xf/0x1b
[ 0.866129] [<c100e276>] ? default_idle+0x3f/0x5d
[ 0.866135] [<c1007dc4>] ? cpu_idle+0x98/0xdc
[ 0.866142] [<c14058a0>] ? start_kernel+0x320/0x325
[ 0.866150] [<c1407479>] ? xen_start_kernel+0x5a1/0x5a8
[ 0.866157] [<c1409046>] ? trap_init+0x1fe/0x367
[ 0.866162] ---[ end trace b6935cbfedb011b6 ]---
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... [ 0.977508] device-mapper: uevent: version 1.0.3
[ 0.978078] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
done.
Begin: Running /scripts/local-premount ... done.
[ 1.125678] EXT3-fs: barriers not enabled
[ 1.131378] kjournald starting. Commit interval 5 seconds
[ 1.131395] EXT3-fs (dm-0): mounted filesystem with ordered data mode
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd[ 1.957027] udev[160]: starting version 164
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 2.239895] input: PC Speaker as /devices/platform/pcspkr/input/input0
done.
Activating swap...done.
[ 5.367412] EXT3-fs (dm-0): warning: maximal mount count reached, running e2fsck is recommended
[ 5.408349] EXT3-fs (dm-0): using internal journal
Cleaning up ifupdown....
Loading kernel modules...done.
Setting up networking....
Activating lvm and md swap...done.
Checking file systems...fsck from util-linux-ng 2.17.2
done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Cleaning up temporary files....
Setting kernel variables ...done.
Configuring network interfaces...[ 5.895422] sky2 0000:00:00.0: eth0: enabling interface
[ 5.895488] ADDRCONF(NETDEV_UP): eth0: link is not ready
done.
Cleaning up temporary files....
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.
Starting enhanced syslogd: rsyslogd.
Starting periodic command scheduler: cron.
Debian GNU/Linux 6.0 xps-106 hvc0
xps-106 login: [ 8.332107] sky2 0000:00:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both
[ 8.332161] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[-- Attachment #6: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
next prev parent reply other threads:[~2011-02-02 11:33 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-12 15:38 PCI passthrough issue Jean Baptiste Favre
2011-01-12 15:43 ` Konrad Rzeszutek Wilk
2011-01-12 15:53 ` Jean Baptiste Favre
2011-01-12 16:09 ` Jean Baptiste Favre
2011-01-12 16:36 ` Konrad Rzeszutek Wilk
2011-01-12 16:56 ` Jean Baptiste Favre
2011-01-12 17:26 ` Konrad Rzeszutek Wilk
2011-01-12 17:44 ` Jean Baptiste Favre
2011-01-12 18:32 ` Konrad Rzeszutek Wilk
2011-01-12 20:07 ` Jean Baptiste Favre
2011-01-12 21:40 ` Konrad Rzeszutek Wilk
2011-01-12 21:46 ` Jean Baptiste Favre
2011-01-12 22:18 ` Jean Baptiste Favre
2011-01-13 11:28 ` Jean Baptiste Favre
2011-01-13 19:18 ` Jean Baptiste Favre
2011-01-13 20:19 ` Konrad Rzeszutek Wilk
2011-01-13 20:44 ` Jean Baptiste Favre
2011-01-14 14:53 ` Konrad Rzeszutek Wilk
2011-01-14 23:29 ` Jean Baptiste Favre
2011-01-17 8:59 ` Jean Baptiste Favre
2011-01-17 13:58 ` Jean Baptiste Favre
2011-01-22 10:22 ` Jean Baptiste Favre
2011-01-27 20:27 ` Konrad Rzeszutek Wilk
2011-01-27 21:47 ` Jean Baptiste Favre
2011-01-28 15:47 ` Jean Baptiste Favre
2011-02-01 11:34 ` Ian Campbell
2011-02-01 12:17 ` Jean Baptiste Favre
2011-02-01 13:20 ` Ian Campbell
2011-02-01 14:12 ` Jean Baptiste Favre
2011-02-01 14:18 ` Ian Campbell
2011-02-01 15:14 ` Jean Baptiste Favre
2011-02-01 15:38 ` Jean Baptiste Favre
2011-02-01 16:23 ` Ian Campbell
2011-02-01 19:37 ` Konrad Rzeszutek Wilk
2011-02-01 22:06 ` Jean Baptiste Favre
2011-02-02 9:12 ` Ian Campbell
2011-02-01 23:01 ` Jean Baptiste Favre
2011-02-02 9:44 ` Ian Campbell
2011-02-02 15:38 ` Konrad Rzeszutek Wilk
2011-02-02 15:55 ` Ian Campbell
2011-02-02 15:56 ` Jean Baptiste Favre
2011-02-01 22:04 ` Jean Baptiste Favre
2011-02-02 9:27 ` Ian Campbell
2011-02-02 10:24 ` Jean Baptiste Favre
2011-02-02 10:59 ` Ian Campbell
2011-02-02 11:33 ` Jean Baptiste Favre [this message]
2011-02-02 17:42 ` Konrad Rzeszutek Wilk
2011-02-04 8:43 ` Jean Baptiste Favre
2011-02-04 8:53 ` Ian Campbell
2011-02-04 8:54 ` Jean Baptiste Favre
2011-02-04 10:12 ` Jean Baptiste Favre
2011-02-04 11:04 ` Ian Campbell
2011-02-04 11:25 ` Jean Baptiste Favre
2011-02-04 11:28 ` Ian Campbell
2011-02-04 13:15 ` Jean Baptiste Favre
2011-02-04 13:50 ` Ian Campbell
2011-02-04 14:01 ` Jean Baptiste Favre
2011-02-09 9:59 ` Jean Baptiste Favre
2011-02-18 21:14 ` Jean Baptiste Favre
2011-02-25 14:40 ` Konrad Rzeszutek Wilk
2011-02-28 10:00 ` Jean Baptiste Favre
2011-02-28 12:18 ` Jean Baptiste Favre
2011-02-28 15:01 ` Konrad Rzeszutek Wilk
2011-02-28 15:17 ` Jean Baptiste Favre
[not found] ` <4D6CB851.40103@jbfavre.org>
2011-03-03 22:12 ` Konrad Rzeszutek Wilk
2011-03-03 22:47 ` Jean Baptiste Favre
2011-03-03 22:58 ` Konrad Rzeszutek Wilk
2011-03-04 7:25 ` Jean Baptiste Favre
2011-03-16 3:14 ` Konrad Rzeszutek Wilk
2011-03-25 13:06 ` Jean Baptiste Favre
2011-02-01 15:38 ` Ian Campbell
2011-02-01 16:16 ` Jean Baptiste Favre
2011-01-12 21:44 ` Jean Baptiste Favre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D4940F0.602@jbfavre.org \
--to=xen-devel@jbfavre.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).