* Re: PV Driver Building Error
[not found] <201103231729228326051@gmail.com>
@ 2011-03-23 9:32 ` Lars Kurth
2011-03-23 10:00 ` Re: GPLPV " Pasi Kärkkäinen
0 siblings, 1 reply; 3+ messages in thread
From: Lars Kurth @ 2011-03-23 9:32 UTC (permalink / raw)
To: mayao1986, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 931 bytes --]
Mayao,
I would raise the issue that the sources don't build with an error
description on xen-devel@lists.xensource.com
Regards
Lars
On 23/03/2011 09:29, mayao1986 wrote:
> lars：
> Hi,I'm a postgraduate in china ,doing some research in xen based on
> the source of pv driver. As instructed,I have installed the PV driver
> in my win_xp HVM. The problem happend when I'm building the sources
> downloaded from win-pvdriver.hg.
> After installing the Win DDK(latest) and nisi(latest),some errors came
> after makedist command entered, which took place at "xennet_rx.c"'s
> compileing.
> Also,win-pvdriver hg have four branches: default,wdf,wdm,scsiport. I'm
> curious about relationship among them and how to building them.
> If you can give me some advice, you wil be appreciated by me.Thanks in
> advance.
> 2011-03-23
> ------------------------------------------------------------------------
> mayao1986
[-- Attachment #1.2: Type: text/html, Size: 4323 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Re: GPLPV Driver Building Error
2011-03-23 9:32 ` PV Driver Building Error Lars Kurth
@ 2011-03-23 10:00 ` Pasi Kärkkäinen
2011-03-23 10:52 ` James Harper
0 siblings, 1 reply; 3+ messages in thread
From: Pasi Kärkkäinen @ 2011-03-23 10:00 UTC (permalink / raw)
To: Lars Kurth; +Cc: James Harper, xen-devel, mayao1986
On Wed, Mar 23, 2011 at 09:32:51AM +0000, Lars Kurth wrote:
> Mayao,
> I would raise the issue that the sources don't build with an error
> description on [1]xen-devel@lists.xensource.com
Hello,
Added James Harper as CC, he's the author of gplpv driver..
-- Pasi
> Regards
> Lars
>
> On 23/03/2011 09:29, mayao1986 wrote:
>
> lars£º
> Hi,I'm a postgraduate in china ,doing some research in xen based on the
> source of pv driver. As instructed,I have installed the PV driver in my
> win_xp HVM. The problem happend when I'm building the sources downloaded
> from win-pvdriver.hg.
> After installing the Win DDK(latest) and nisi(latest),some errors came
> after makedist command entered, which took place at "xennet_rx.c"'s
> compileing.
> Also,win-pvdriver hg have four branches: default,wdf,wdm,scsiport. I'm
> curious about relationship among them and how to building them.
> If you can give me some advice, you wil be appreciated by me.Thanks in
> advance.
> 2011-03-23
>
> --------------------------------------------------------------------------
>
> mayao1986
>
> References
>
> Visible links
> 1. mailto:xen-devel@lists.xensource.com
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: Re: GPLPV Driver Building Error
2011-03-23 10:00 ` Re: GPLPV " Pasi Kärkkäinen
@ 2011-03-23 10:52 ` James Harper
0 siblings, 0 replies; 3+ messages in thread
From: James Harper @ 2011-03-23 10:52 UTC (permalink / raw)
To: Pasi Kärkkäinen, Lars Kurth; +Cc: xen-devel, mayao1986
I must have missed the original email. My spam filter is pretty picky about a lot of things so if there is a bad address in the cc list or something I just won't see it - I regularly get probe messages from the xen-devel mailer.
Unfortunately the build docs are probably a bit dated. NSIS isn't used anymore, you need WiX to build the installer (same installer Microsoft use I believe - it's on sourceforge).
That's probably nothing to do with any compile errors you are getting in xennet_rx.c though. Can you send me the error you are getting? There should be a .err and a .wrn file created when you try and build.
James
> -----Original Message-----
> From: Pasi Kärkkäinen [mailto:pasik@iki.fi]
> Sent: Wednesday, 23 March 2011 21:00
> To: Lars Kurth
> Cc: mayao1986; xen-devel@lists.xensource.com; James Harper
> Subject: Re: [Xen-devel] Re: GPLPV Driver Building Error
>
> On Wed, Mar 23, 2011 at 09:32:51AM +0000, Lars Kurth wrote:
> > Mayao,
> > I would raise the issue that the sources don't build with an error
> > description on [1]xen-devel@lists.xensource.com
>
> Hello,
>
> Added James Harper as CC, he's the author of gplpv driver..
>
> -- Pasi
>
> > Regards
> > Lars
> >
> > On 23/03/2011 09:29, mayao1986 wrote:
> >
> > lars£º
> > Hi,I'm a postgraduate in china ,doing some research in xen based on the
> > source of pv driver. As instructed,I have installed the PV driver in my
> > win_xp HVM. The problem happend when I'm building the sources
> downloaded
> > from win-pvdriver.hg.
> > After installing the Win DDK(latest) and nisi(latest),some errors came
> > after makedist command entered, which took place at "xennet_rx.c"'s
> > compileing.
> > Also,win-pvdriver hg have four branches: default,wdf,wdm,scsiport. I'm
> > curious about relationship among them and how to building them.
> > If you can give me some advice, you wil be appreciated by me.Thanks in
> > advance.
> > 2011-03-23
> >
> > -------------------------------------------------------------------------
> -
> >
> > mayao1986
> >
> > References
> >
> > Visible links
> > 1. mailto:xen-devel@lists.xensource.com
>
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xensource.com
> > http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-03-23 10:52 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <201103231729228326051@gmail.com>
2011-03-23 9:32 ` PV Driver Building Error Lars Kurth
2011-03-23 10:00 ` Re: GPLPV " Pasi Kärkkäinen
2011-03-23 10:52 ` James Harper
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).