From: "MadLoisae@gmx.net" <MadLoisae@gmx.net>
To: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Keir Fraser <keir.xen@gmail.com>, xen-devel@lists.xensource.com
Subject: Re: on starting HVM-domU whole system freezes with "soft lockup - CPU X stuck for XXs! [qemu-dm:...]" [xen 4.0, xen 4.1]
Date: Tue, 19 Apr 2011 00:23:11 +0200 [thread overview]
Message-ID: <4DACB9CF.1000303@gmx.net> (raw)
In-Reply-To: <20110418210230.GA8003@dumpdata.com>
[-- Attachment #1: Type: text/plain, Size: 1516 bytes --]
Hi Konrad,
thank you.
I've read in a small howto that touching the virtual disk is enough. So
it isn't, I've filled it not with 2048MBytes.
I have now attached the virt-install command (i hope this is what you
expect by ".xm").
Also I discovered now a behaviour: only initializing the vm needs so
much time and stalls the machine, as soon as I can see i.e. the
boot-screen from the iso the dom0 is back. The initialisation needs
nearly 5 minutes (so wairing and hoping this 5 minutes ;) ).
I can see in "Bios"-Bootscreen and also in xm dmesg log IDE timeouts.
Maybe they point to the reason?
I've attached xm dmesg and dom0 dmesg again after creating and booting
the machine with the attached command and waiting for the iso-bootprompt.
Alois
On 04/18/2011 11:02 PM, Konrad Rzeszutek Wilk wrote:
> On Sat, Apr 16, 2011 at 12:11:34AM +0200, MadLoisae@gmx.net wrote:
>
>> I just saw that I made two threads instead of one ... hopefully this
>> email now receives in the correct one. ;)
>>
> The log file is a bit stange. The HVM says:
>
> (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk ( 0 MBytes)
>
> Is your /home/guest1.dsk really 0 megabytes? Have you
> tried to use a physical device (say LVM logical volume) just to eliminate
> it being the blktap at fault here? (there was a bug in the blktap
> driver that Daniel posted recently here).
>
> Instead of using the configuration with the sxp expression can you just
> post the .xm one please? They are much easier to read.
>
>
>
[-- Attachment #2: dmesg_dom0_amd64xen41_loglvl=all_HVM-booted --]
[-- Type: text/plain, Size: 70395 bytes --]
[ 0.000000] Reserving virtual address space above 0xffc00000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-xen-686 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Mar 9 01:27:54 UTC 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] Xen: 000000007f690000 - 000000007f6e0000 (reserved)
[ 0.000000] Xen: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS)
[ 0.000000] Xen: 000000007f6e3000 - 000000007f6f0000 (ACPI data)
[ 0.000000] Xen: 000000007f6f0000 - 000000007f700000 (reserved)
[ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.2 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 037ff000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 100000-2bf000
[ 0.000000] RAMDISK: 01651000 - 02c50c00
[ 0.000000] ACPI: RSDP 000f7c90 00014 (v00 IntelR)
[ 0.000000] ACPI: RSDT 7f6e3000 00038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 7f6e3080 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 7f6e3100 05122 (v01 INTELR AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 7f6e0000 00040
[ 0.000000] ACPI: IDTS 7f6e82c0 00028 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: MCFG 7f6e8300 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 7f6e8240 00068 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 7f6e89a0 00482 (v01 PmRef CpuPm 00003000 INTL 20050930)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 140MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00010000 - 00016e80
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0002d54000 - 0002d72000] XEN PAGETABLES ==> [0002d54000 - 0002d72000]
[ 0.000000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #4 [0001000000 - 000152b8f4] TEXT DATA BSS ==> [0001000000 - 000152b8f4]
[ 0.000000] #5 [0001651000 - 0002c50c00] RAMDISK ==> [0001651000 - 0002c50c00]
[ 0.000000] #6 [0002c51000 - 0002d54000] XEN START INFO ==> [0002c51000 - 0002d54000]
[ 0.000000] #7 [000152c000 - 000152c0a6] BRK ==> [000152c000 - 000152c0a6]
[ 0.000000] #8 [0000100000 - 00002a1000] PGTABLE ==> [0000100000 - 00002a1000]
[ 0.000000] #9 [0000010000 - 0000017000] BOOTMAP ==> [0000010000 - 0000017000]
[ 0.000000] found SMP MP-table at [c00f38d0] f38d0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x00040000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00040000
[ 0.000000] On node 0 totalpages: 262031
[ 0.000000] free_area_init_node: node 0, pgdat c13f4d00, node_mem_map c2d72200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 281 pages used for memmap
[ 0.000000] HighMem zone: 35561 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 256
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7f700000 (gap: 7f700000:60900000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.1.0 (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @c3579000 s37688 r0 d23752 u65536
[ 0.000000] pcpu-alloc: s37688 r0 d23752 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] trying to map vcpu_info 0 at c357a010, mfn 7bf7a, offset 16
[ 0.000000] cpu 0 using vcpu_info at c357a010
[ 0.000000] trying to map vcpu_info 1 at c358a010, mfn 7bf8a, offset 16
[ 0.000000] cpu 1 using vcpu_info at c358a010
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259982
[ 0.000000] Kernel command line: placeholder root=UUID=d2f5597b-9c57-4df6-8653-29bb3160cf66 ro acpi_enforce_resources=lax vga=0x31A profile=2 panic=300
[ 0.000000] kernel profiling enabled (shift: 2)
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between c365d000 - c765d000
[ 0.000000] DMA: software IO TLB at phys 0x365d000 - 0x765d000
[ 0.000000] xen_swiotlb_fixup: buf=c365d000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=c76bd000 size=32768
[ 0.000000] Initializing HighMem for node 0 (000373fe:00040000)
[ 0.000000] Memory: 941852k/1048576k available (2635k kernel code, 105756k reserved, 1455k data, 404k init, 143368k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xff956000 - 0xffbff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff600000 (2048 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13ff000 - 0xc1464000 ( 404 kB)
[ 0.000000] .data : 0xc1292d81 - 0xc13feb18 (1455 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1292d81 (2635 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1536
[ 0.000000] xen: --> irq=0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen: --> irq=2
[ 0.000000] xen: --> irq=3
[ 0.000000] xen: --> irq=4
[ 0.000000] xen: --> irq=5
[ 0.000000] xen: --> irq=6
[ 0.000000] xen: --> irq=7
[ 0.000000] xen: --> irq=8
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: --> irq=10
[ 0.000000] xen: --> irq=11
[ 0.000000] xen: --> irq=12
[ 0.000000] xen: --> irq=13
[ 0.000000] xen: --> irq=14
[ 0.000000] xen: --> irq=15
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 0
[ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: acpi sci 9
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 1995.059 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.11 BogoMIPS (lpj=7980236)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys devices
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only.
[ 0.004000] SMP alternatives: switching to UP code
[ 0.004000] ACPI: Core revision 20090903
[ 0.016438] installing Xen timer for CPU 1
[ 0.016534] SMP alternatives: switching to SMP code
[ 0.004000] Initializing CPU#1
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.020136] Brought up 2 CPUs
[ 0.020446] CPU0 attaching sched-domain:
[ 0.020451] domain 0: span 0-1 level CPU
[ 0.020458] groups: 0 1
[ 0.020471] CPU1 attaching sched-domain:
[ 0.020476] domain 0: span 0-1 level CPU
[ 0.020482] groups: 1 0
[ 0.020580] devtmpfs: initialized
[ 0.020580] Grant table initialized
[ 0.020580] regulator: core version 0.5
[ 0.020580] NET: Registered protocol family 16
[ 0.020580] ACPI: bus type pci registered
[ 0.020580] sync cpu 0 get result 1 max_id 1
[ 0.020580] sync cpu 1 get result 1 max_id 1
[ 0.020580] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.020580] PCI: MCFG area at e0000000 reserved in E820
[ 0.020580] PCI: Using MMCONFIG for extended config space
[ 0.020580] PCI: Using configuration type 1 for base access
[ 0.021353] bio: create slab <bio-0> at 0
[ 0.026749] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.026842] ACPI: EC: Look up EC in DSDT
[ 0.047105] ACPI: Interpreter enabled
[ 0.047162] ACPI: (supports S0 S1 S4 S5)
[ 0.047385] ACPI: Using IOAPIC for interrupt routing
[ 0.061447] ACPI: No dock devices found.
[ 0.061681] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.062004] pci 0000:00:02.0: reg 10 32bit mmio: [0xfdf00000-0xfdf7ffff]
[ 0.062019] pci 0000:00:02.0: reg 14 io port: [0xff00-0xff07]
[ 0.062034] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.062049] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfdf80000-0xfdfbffff]
[ 0.062317] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff]
[ 0.062447] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.062513] pci 0000:00:1b.0: PME# disabled
[ 0.062766] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.062831] pci 0000:00:1c.0: PME# disabled
[ 0.063089] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.063154] pci 0000:00:1c.1: PME# disabled
[ 0.063412] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.063477] pci 0000:00:1c.2: PME# disabled
[ 0.063735] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.063800] pci 0000:00:1c.3: PME# disabled
[ 0.063991] pci 0000:00:1d.0: reg 20 io port: [0xfe00-0xfe1f]
[ 0.064001] pci 0000:00:1d.1: reg 20 io port: [0xfd00-0xfd1f]
[ 0.064001] pci 0000:00:1d.2: reg 20 io port: [0xfc00-0xfc1f]
[ 0.064001] pci 0000:00:1d.3: reg 20 io port: [0xfb00-0xfb1f]
[ 0.064001] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]
[ 0.064001] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.064001] pci 0000:00:1d.7: PME# disabled
[ 0.064001] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.064001] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.064001] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.064001] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
[ 0.064001] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.064050] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.064067] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.064084] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.064101] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.064118] pci 0000:00:1f.1: reg 20 io port: [0xfa00-0xfa0f]
[ 0.064237] pci 0000:00:1f.2: reg 10 io port: [0xf900-0xf907]
[ 0.064254] pci 0000:00:1f.2: reg 14 io port: [0xf800-0xf803]
[ 0.064271] pci 0000:00:1f.2: reg 18 io port: [0xf700-0xf707]
[ 0.064288] pci 0000:00:1f.2: reg 1c io port: [0xf600-0xf603]
[ 0.064304] pci 0000:00:1f.2: reg 20 io port: [0xf500-0xf50f]
[ 0.064321] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffe000-0xfdffe3ff]
[ 0.064385] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.064448] pci 0000:00:1f.2: PME# disabled
[ 0.064618] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.064816] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd8e0000-0xfd8fffff]
[ 0.064856] pci 0000:01:00.0: reg 18 io port: [0xbf00-0xbf1f]
[ 0.065027] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.065095] pci 0000:01:00.0: PME# disabled
[ 0.065233] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.065516] pci 0000:00:1c.0: bridge io port: [0xb000-0xbfff]
[ 0.065527] pci 0000:00:1c.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff]
[ 0.065545] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfd500000-0xfd5fffff]
[ 0.065682] pci 0000:02:00.0: reg 10 32bit mmio: [0xfdee0000-0xfdefffff]
[ 0.065722] pci 0000:02:00.0: reg 18 io port: [0xaf00-0xaf1f]
[ 0.065892] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.065960] pci 0000:02:00.0: PME# disabled
[ 0.066097] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.066380] pci 0000:00:1c.1: bridge io port: [0xa000-0xafff]
[ 0.066391] pci 0000:00:1c.1: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.066408] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff]
[ 0.066548] pci 0000:03:00.0: reg 10 32bit mmio: [0xfdce0000-0xfdcfffff]
[ 0.066588] pci 0000:03:00.0: reg 18 io port: [0xef00-0xef1f]
[ 0.066757] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.066825] pci 0000:03:00.0: PME# disabled
[ 0.066962] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.067244] pci 0000:00:1c.2: bridge io port: [0xe000-0xefff]
[ 0.067254] pci 0000:00:1c.2: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.067272] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
[ 0.067408] pci 0000:04:00.0: reg 10 32bit mmio: [0xfdae0000-0xfdafffff]
[ 0.067448] pci 0000:04:00.0: reg 18 io port: [0xdf00-0xdf1f]
[ 0.067618] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.067686] pci 0000:04:00.0: PME# disabled
[ 0.067823] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.068001] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
[ 0.068001] pci 0000:00:1c.3: bridge 32bit mmio: [0xfda00000-0xfdafffff]
[ 0.068001] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff]
[ 0.068001] pci 0000:05:00.0: reg 10 32bit mmio: [0xfd7ff000-0xfd7ff1ff]
[ 0.068001] pci 0000:05:02.0: reg 10 32bit mmio: [0xfd7e0000-0xfd7effff]
[ 0.068001] pci 0000:05:02.0: PME# supported from D0 D3hot
[ 0.068001] pci 0000:05:02.0: PME# disabled
[ 0.068001] pci 0000:00:1e.0: transparent bridge
[ 0.068001] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[ 0.068001] pci 0000:00:1e.0: bridge 32bit mmio: [0xfd700000-0xfd7fffff]
[ 0.068001] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfd600000-0xfd6fffff]
[ 0.068001] pci_bus 0000:00: on NUMA node 0
[ 0.068001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.068001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.068001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.068001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.068001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.068001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.101252] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.101831] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.102409] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.102987] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15)
[ 0.103562] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.104137] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.104783] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.105430] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[ 0.105943] xen_balloon: Initialising balloon driver with page order 0.
[ 0.106090] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.106199] vgaarb: loaded
[ 0.106299] PCI: Using ACPI for IRQ routing
[ 0.106299] Switching to clocksource xen
[ 0.106921] pnp: PnP ACPI init
[ 0.106991] ACPI: bus type pnp registered
[ 0.108016] xen: registering gsi 8 triggering 1 polarity 0
[ 0.108022] xen_allocate_pirq: returning irq 8 for gsi 8
[ 0.108079] xen: --> irq=8
[ 0.108245] xen: registering gsi 13 triggering 1 polarity 0
[ 0.108250] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.108309] xen: --> irq=13
[ 0.109353] xen: registering gsi 4 triggering 1 polarity 0
[ 0.109357] xen_allocate_pirq: returning irq 4 for gsi 4
[ 0.109415] xen: --> irq=4
[ 0.110814] xen: registering gsi 1 triggering 1 polarity 0
[ 0.110819] xen_allocate_pirq: returning irq 1 for gsi 1
[ 0.110877] xen: --> irq=1
[ 0.113453] pnp: PnP ACPI: found 12 devices
[ 0.113509] ACPI: ACPI bus type pnp unregistered
[ 0.113566] PnPBIOS: Disabled
[ 0.113632] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.113693] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.113754] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.113824] system 00:08: ioport range 0x400-0x4bf could not be reserved
[ 0.113892] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.113962] system 00:0b: iomem range 0xf0000-0xfffff could not be reserved
[ 0.114025] system 00:0b: iomem range 0x7f6e0000-0x7f6fffff could not be reserved
[ 0.114107] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.114169] system 00:0b: iomem range 0x100000-0x7f6dffff could not be reserved
[ 0.114250] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.114332] system 00:0b: iomem range 0xfed13000-0xfed1dfff has been reserved
[ 0.114394] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.114457] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.114520] system 00:0b: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.114582] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.114646] system 00:0b: iomem range 0xe0000-0xeffff could not be reserved
[ 0.121072] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.121270] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.121333] pci 0000:00:1c.0: IO window: 0xb000-0xbfff
[ 0.121399] pci 0000:00:1c.0: MEM window: 0xfd800000-0xfd8fffff
[ 0.121464] pci 0000:00:1c.0: PREFETCH window: 0x000000fd500000-0x000000fd5fffff
[ 0.121555] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.121617] pci 0000:00:1c.1: IO window: 0xa000-0xafff
[ 0.121684] pci 0000:00:1c.1: MEM window: 0xfde00000-0xfdefffff
[ 0.121749] pci 0000:00:1c.1: PREFETCH window: 0x000000fdd00000-0x000000fddfffff
[ 0.121840] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[ 0.121901] pci 0000:00:1c.2: IO window: 0xe000-0xefff
[ 0.121968] pci 0000:00:1c.2: MEM window: 0xfdc00000-0xfdcfffff
[ 0.122033] pci 0000:00:1c.2: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[ 0.122124] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
[ 0.122186] pci 0000:00:1c.3: IO window: 0xd000-0xdfff
[ 0.122252] pci 0000:00:1c.3: MEM window: 0xfda00000-0xfdafffff
[ 0.122317] pci 0000:00:1c.3: PREFETCH window: 0x000000fd900000-0x000000fd9fffff
[ 0.122409] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.122471] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 0.122537] pci 0000:00:1e.0: MEM window: 0xfd700000-0xfd7fffff
[ 0.122602] pci 0000:00:1e.0: PREFETCH window: 0x000000fd600000-0x000000fd6fffff
[ 0.122710] xen: registering gsi 16 triggering 0 polarity 1
[ 0.122728] xen: --> irq=16
[ 0.122738] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.122805] pci 0000:00:1c.0: setting latency timer to 64
[ 0.122828] xen: registering gsi 17 triggering 0 polarity 1
[ 0.122836] xen: --> irq=17
[ 0.122843] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.122910] pci 0000:00:1c.1: setting latency timer to 64
[ 0.122933] xen: registering gsi 18 triggering 0 polarity 1
[ 0.122941] xen: --> irq=18
[ 0.122949] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.123016] pci 0000:00:1c.2: setting latency timer to 64
[ 0.123038] xen: registering gsi 19 triggering 0 polarity 1
[ 0.123047] xen: --> irq=19
[ 0.123054] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.123121] pci 0000:00:1c.3: setting latency timer to 64
[ 0.123140] pci 0000:00:1e.0: setting latency timer to 64
[ 0.123148] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.123154] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.123159] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.123164] pci_bus 0000:01: resource 1 mem: [0xfd800000-0xfd8fffff]
[ 0.123169] pci_bus 0000:01: resource 2 pref mem [0xfd500000-0xfd5fffff]
[ 0.123174] pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
[ 0.123179] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.123184] pci_bus 0000:02: resource 2 pref mem [0xfdd00000-0xfddfffff]
[ 0.123189] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.123194] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff]
[ 0.123199] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff]
[ 0.123204] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.123209] pci_bus 0000:04: resource 1 mem: [0xfda00000-0xfdafffff]
[ 0.123214] pci_bus 0000:04: resource 2 pref mem [0xfd900000-0xfd9fffff]
[ 0.123219] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff]
[ 0.123223] pci_bus 0000:05: resource 1 mem: [0xfd700000-0xfd7fffff]
[ 0.123228] pci_bus 0000:05: resource 2 pref mem [0xfd600000-0xfd6fffff]
[ 0.123233] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.123238] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.123270] NET: Registered protocol family 2
[ 0.123414] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.123814] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.124467] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.124800] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.124861] TCP reno registered
[ 0.125004] NET: Registered protocol family 1
[ 0.125055] pci 0000:00:02.0: Boot video device
[ 0.125377] Unpacking initramfs...
[ 0.214490] Freeing initrd memory: 22527k freed
[ 0.229643] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.229720] DMA: Placing 64MB software IO TLB between c365d000 - c765d000
[ 0.229780] DMA: software IO TLB at phys 0x365d000 - 0x765d000
[ 0.230442] audit: initializing netlink socket (disabled)
[ 0.230525] type=2000 audit(1303162962.694:1): initialized
[ 0.234489] highmem bounce pool size: 64 pages
[ 0.234550] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.237003] VFS: Disk quotas dquot_6.5.2
[ 0.237146] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.237352] msgmni has been set to 1604
[ 0.237786] alg: No test for stdrng (krng)
[ 0.237927] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.238008] io scheduler noop registered
[ 0.238062] io scheduler anticipatory registered
[ 0.238118] io scheduler deadline registered
[ 0.238223] io scheduler cfq registered (default)
[ 0.238682] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.239041] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.239402] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.239757] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.240177] isapnp: Scanning for PnP cards...
[ 0.596344] isapnp: No Plug & Play device found
[ 0.602939] registering netback
[ 0.605624] Linux agpgart interface v0.103
[ 0.605811] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 0.607957] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 0.611317] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.611499] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.611730] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.612288] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.612589] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.612649] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.613061] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.613806] mice: PS/2 mouse device common for all mice
[ 0.613951] rtc_cmos 00:03: RTC can wake from S4
[ 0.614074] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.614178] rtc0: alarms up to one month, 242 bytes nvram
[ 0.614251] cpuidle: using governor ladder
[ 0.614306] cpuidle: using governor menu
[ 0.614364] No iBFT detected.
[ 0.614760] TCP cubic registered
[ 0.615028] NET: Registered protocol family 10
[ 0.615881] Mobile IPv6
[ 0.615934] NET: Registered protocol family 17
[ 0.616005] Using IPI No-Shortcut mode
[ 0.616166] PM: Resume from disk failed.
[ 0.616187] registered taskstats version 1
[ 0.617275] rtc_cmos 00:03: setting system clock to 2011-04-18 21:42:42 UTC (1303162962)
[ 0.617406] Initalizing network drop monitor service
[ 0.617508] Freeing unused kernel memory: 404k freed
[ 0.618704] Write protecting the kernel text: 2636k
[ 0.619135] Write protecting the kernel read-only data: 968k
[ 0.638577] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.665160] udev[62]: starting version 164
[ 0.757819] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.757900] ACPI: Thermal Zone [TZ00] (58 C)
[ 0.758876] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.758952] ACPI: Thermal Zone [THRM] (40 C)
[ 0.885605] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 0.885672] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 0.885822] xen: registering gsi 16 triggering 0 polarity 1
[ 0.885828] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.885885] xen: --> irq=16
[ 0.885894] Already setup the GSI :16
[ 0.885949] e1000e 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.886076] e1000e 0000:01:00.0: setting latency timer to 64
[ 0.891852] usbcore: registered new interface driver usbfs
[ 0.891945] usbcore: registered new interface driver hub
[ 0.892077] usbcore: registered new device driver usb
[ 0.905174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.905281] xen: registering gsi 23 triggering 0 polarity 1
[ 0.905298] xen: --> irq=23
[ 0.905309] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.906349] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.906357] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.906449] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.906596] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.906677] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.910625] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.912855] SCSI subsystem initialized
[ 0.922260] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 0.936318] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.936426] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.936488] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.936567] usb usb1: Product: EHCI Host Controller
[ 0.936624] usb usb1: Manufacturer: Linux 2.6.32-5-xen-686 ehci_hcd
[ 0.936683] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.936846] usb usb1: configuration #1 chosen from 1 choice
[ 0.936953] hub 1-0:1.0: USB hub found
[ 0.937034] hub 1-0:1.0: 8 ports detected
[ 0.945040] fan PNP0C0B:00: registered as cooling_device0
[ 0.945111] ACPI: Fan [FAN] (on)
[ 0.947888] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.947995] xen: registering gsi 23 triggering 0 polarity 1
[ 0.948000] xen_allocate_pirq: returning irq 23 for gsi 23
[ 0.948057] xen: --> irq=23
[ 0.948081] Already setup the GSI :23
[ 0.948136] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.948209] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.948218] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.948287] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.948413] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
[ 0.948570] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.948631] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.948710] usb usb2: Product: UHCI Host Controller
[ 0.948766] usb usb2: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[ 0.948825] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.948980] usb usb2: configuration #1 chosen from 1 choice
[ 0.949087] hub 2-0:1.0: USB hub found
[ 0.949162] hub 2-0:1.0: 2 ports detected
[ 0.949307] xen: registering gsi 19 triggering 0 polarity 1
[ 0.949312] xen_allocate_pirq: returning irq 19 for gsi 19
[ 0.949370] xen: --> irq=19
[ 0.949375] Already setup the GSI :19
[ 0.949430] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.949500] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.949509] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.949576] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.949720] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
[ 0.949873] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.949939] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.950022] usb usb3: Product: UHCI Host Controller
[ 0.950082] usb usb3: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[ 0.950143] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.950300] usb usb3: configuration #1 chosen from 1 choice
[ 0.950405] hub 3-0:1.0: USB hub found
[ 0.950478] hub 3-0:1.0: 2 ports detected
[ 0.950621] xen: registering gsi 18 triggering 0 polarity 1
[ 0.950626] xen_allocate_pirq: returning irq 18 for gsi 18
[ 0.950683] xen: --> irq=18
[ 0.950689] Already setup the GSI :18
[ 0.950743] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.950814] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.950822] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.950891] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.951029] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
[ 0.951180] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.951243] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.951322] usb usb4: Product: UHCI Host Controller
[ 0.951378] usb usb4: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[ 0.951437] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.951586] usb usb4: configuration #1 chosen from 1 choice
[ 0.951691] hub 4-0:1.0: USB hub found
[ 0.951765] hub 4-0:1.0: 2 ports detected
[ 0.951905] xen: registering gsi 16 triggering 0 polarity 1
[ 0.951909] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.951967] xen: --> irq=16
[ 0.951973] Already setup the GSI :16
[ 0.952026] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.952071] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.952071] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.952071] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.952551] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
[ 0.952703] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.952766] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.952845] usb usb5: Product: UHCI Host Controller
[ 0.952900] usb usb5: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[ 0.952959] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.953115] usb usb5: configuration #1 chosen from 1 choice
[ 0.953221] hub 5-0:1.0: USB hub found
[ 0.953295] hub 5-0:1.0: 2 ports detected
[ 0.954491] libata version 3.00 loaded.
[ 0.957795] ata_piix 0000:00:1f.1: version 2.13
[ 0.957816] xen: registering gsi 18 triggering 0 polarity 1
[ 0.957820] xen_allocate_pirq: returning irq 18 for gsi 18
[ 0.957880] xen: --> irq=18
[ 0.957886] Already setup the GSI :18
[ 0.957943] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.958068] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.958209] scsi0 : ata_piix
[ 0.958504] scsi1 : ata_piix
[ 0.960611] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 0.960678] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 0.960897] xen: registering gsi 19 triggering 0 polarity 1
[ 0.960902] xen_allocate_pirq: returning irq 19 for gsi 19
[ 0.960965] xen: --> irq=19
[ 0.960972] Already setup the GSI :19
[ 0.961040] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.961302] ata_piix 0000:00:1f.2: MAP [
[ 0.961337] ata2: port disabled. ignoring.
[ 0.961387] P0 P2 -- -- ]
[ 1.001031] 0000:01:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:06:4f:8f:96:f7
[ 1.001115] 0000:01:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.001247] 0000:01:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
[ 1.001401] xen: registering gsi 17 triggering 0 polarity 1
[ 1.001406] xen_allocate_pirq: returning irq 17 for gsi 17
[ 1.001464] xen: --> irq=17
[ 1.001470] Already setup the GSI :17
[ 1.001525] e1000e 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.001649] e1000e 0000:02:00.0: setting latency timer to 64
[ 1.116818] 0000:02:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:06:4f:8f:96:f8
[ 1.116899] 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 1.117031] 0000:02:00.0: eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff
[ 1.117094] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.117171] xen: registering gsi 18 triggering 0 polarity 1
[ 1.117175] xen_allocate_pirq: returning irq 18 for gsi 18
[ 1.117207] scsi2 : ata_piix
[ 1.117285] xen: --> irq=18
[ 1.117293] Already setup the GSI :18
[ 1.117320] scsi3 : ata_piix
[ 1.117399] e1000e 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.117664] e1000e 0000:03:00.0: setting latency timer to 64
[ 1.119020] ata3: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19
[ 1.119093] ata4: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19
[ 1.146438] ata1.00: CFA: TRANSCEND, 20091215, max UDMA/66
[ 1.146497] ata1.00: 31293360 sectors, multi 0: LBA
[ 1.192284] ata1.01: ATA-8: WDC WD3200BEVE-00A0HT0, 11.01A11, max UDMA/100
[ 1.192371] ata1.01: 625142448 sectors, multi 16: LBA48
[ 1.208466] ata1.00: configured for UDMA/66
[ 1.217596] ata1.01: configured for UDMA/100
[ 1.232461] ata1.00: configured for UDMA/66
[ 1.241338] 0000:03:00.0: eth2: (PCI Express:2.5GB/s:Width x1) 00:06:4f:8f:96:f9
[ 1.241419] 0000:03:00.0: eth2: Intel(R) PRO/1000 Network Connection
[ 1.241557] 0000:03:00.0: eth2: MAC: 2, PHY: 2, PBA No: ffffff-0ff
[ 1.241684] xen: registering gsi 19 triggering 0 polarity 1
[ 1.241689] xen_allocate_pirq: returning irq 19 for gsi 19
[ 1.241747] xen: --> irq=19
[ 1.241753] Already setup the GSI :19
[ 1.241807] e1000e 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.241928] e1000e 0000:04:00.0: setting latency timer to 64
[ 1.249597] ata1.01: configured for UDMA/100
[ 1.249680] ata1: EH complete
[ 1.250027] scsi 0:0:0:0: Direct-Access ATA TRANSCEND 2009 PQ: 0 ANSI: 5
[ 1.250556] scsi 0:0:1:0: Direct-Access ATA WDC WD3200BEVE-0 11.0 PQ: 0 ANSI: 5
[ 1.311392] sd 0:0:0:0: [sda] 31293360 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 1.311500] sd 0:0:1:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.311852] sd 0:0:1:0: [sdb] Write Protect is off
[ 1.311910] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.311978] sd 0:0:0:0: [sda] Write Protect is off
[ 1.312035] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.312140] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.312305] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1.312886] sdb:
[ 1.319688] sda: sdb1 sdb2 sdb3 sdb4
[ 1.320472] sda1
[ 1.321037] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.321290] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 1.366003] 0000:04:00.0: eth3: (PCI Express:2.5GB/s:Width x1) 00:06:4f:8f:96:fa
[ 1.366089] 0000:04:00.0: eth3: Intel(R) PRO/1000 Network Connection
[ 1.366226] 0000:04:00.0: eth3: MAC: 2, PHY: 2, PBA No: ffffff-0ff
[ 1.852799] device-mapper: uevent: version 1.0.3
[ 1.853054] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.885659] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 1.885747] EXT3-fs: write access will be enabled during recovery.
[ 14.704893] kjournald starting. Commit interval 5 seconds
[ 14.704920] EXT3-fs: recovery complete.
[ 14.707519] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.079319] udev[328]: starting version 164
[ 15.209838] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 15.209929] ACPI: Power Button [PWRB]
[ 15.210073] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 15.210167] ACPI: Sleep Button [SLPB]
[ 15.211271] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 15.211354] ACPI: Power Button [PWRF]
[ 15.213824] ACPI: SSDT 7f6e8380 002AE (v01 PmRef Cpu0Ist 00003000 INTL 20050930)
[ 15.271605] ACPI: SSDT 7f6e8840 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20050930)
[ 15.474905] xen: registering gsi 19 triggering 0 polarity 1
[ 15.474911] xen_allocate_pirq: returning irq 19 for gsi 19
[ 15.474971] xen: --> irq=19
[ 15.474979] Already setup the GSI :19
[ 15.475034] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 15.500975] [drm] Initialized drm 1.1.0 20060810
[ 15.505991] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 15.506661] intel_rng: Firmware space is locked read-only. If you can't or
[ 15.506663] intel_rng: don't want to disable this in firmware setup, and if
[ 15.506665] intel_rng: you are certain that your system has a functional
[ 15.506667] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 15.577594] cfg80211: Using static regulatory domain info
[ 15.577658] cfg80211: Regulatory domain: US
[ 15.577714] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 15.577796] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 15.577861] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 15.577927] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 15.577989] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 15.578050] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 15.578112] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 15.578184] cfg80211: Calling CRDA for country: US
[ 15.578268] cfg80211: Calling CRDA for country: AT
[ 16.105282] xen: registering gsi 16 triggering 0 polarity 1
[ 16.105288] xen_allocate_pirq: returning irq 16 for gsi 16
[ 16.105349] xen: --> irq=16
[ 16.105357] Already setup the GSI :16
[ 16.105411] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.105479] i915 0000:00:02.0: setting latency timer to 64
[ 16.118160] [drm] set up 7M of stolen space
[ 16.121140] [drm] initialized overlay support
[ 16.163350] xen: registering gsi 18 triggering 0 polarity 1
[ 16.163357] xen_allocate_pirq: returning irq 18 for gsi 18
[ 16.163417] xen: --> irq=18
[ 16.163425] Already setup the GSI :18
[ 16.163479] ath9k 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 16.165671] Linux video capture interface: v2.00
[ 16.421085] Console: switching to colour frame buffer device 128x48
[ 16.424968] fb0: inteldrmfb frame buffer device
[ 16.425005] registered panic notifier
[ 16.425044] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 17.728936] ath: EEPROM regdomain: 0x809c
[ 17.728940] ath: EEPROM indicates we should expect a country code
[ 17.728945] ath: doing EEPROM country->regdmn map search
[ 17.728949] ath: country maps to regdmn code: 0x52
[ 17.728953] ath: Country alpha2 being used: CN
[ 17.728957] ath: Regpair used: 0x52
[ 17.812597] saa7146: register extension 'budget_av'.
[ 17.823531] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 17.824416] Registered led device: ath9k-phy0::radio
[ 17.824501] Registered led device: ath9k-phy0::assoc
[ 17.824571] Registered led device: ath9k-phy0::tx
[ 17.824639] Registered led device: ath9k-phy0::rx
[ 17.824687] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf8220000, irq=18
[ 17.825316] cfg80211: Calling CRDA for country: CN
[ 17.825406] xen: registering gsi 16 triggering 0 polarity 1
[ 17.825412] xen_allocate_pirq: returning irq 16 for gsi 16
[ 17.825458] xen: --> irq=16
[ 17.825466] Already setup the GSI :16
[ 17.825499] budget_av 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.825563] budget_av 0000:05:00.0: setting latency timer to 64
[ 17.825596] IRQ 16/: IRQF_DISABLED is not guaranteed on shared IRQs
[ 17.825687] saa7146: found saa7146 @ mem f7f32000 (revision 1, irq 16) (0x153b,0x1156).
[ 17.825762] saa7146 (0): dma buffer size 1347584
[ 17.825801] DVB: registering new adapter (Terratec Cinergy 1200 DVB-C)
[ 17.862664] adapter failed MAC signature check
[ 17.862711] encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
[ 17.962975] xen: registering gsi 16 triggering 0 polarity 1
[ 17.962981] xen_allocate_pirq: returning irq 16 for gsi 16
[ 17.963037] xen: --> irq=16
[ 17.963045] Already setup the GSI :16
[ 17.963077] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.963177] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 18.132504] KNC1-0: MAC addr = 00:0a:ac:01:da:a5
[ 18.284848] TDA10021: i2c-addr = 0x0c, id = 0x7c
[ 18.286766] DVB: registering adapter 0 frontend 0 (Philips TDA10021 DVB-C)...
[ 18.289344] budget-av: ci interface initialised.
[ 19.014817] EXT3 FS on sda1, internal journal
[ 19.148103] it87: Found IT8712F chip at 0x290, revision 7
[ 19.149942] ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region IP__ [0x295-0x296]
[ 19.151763] ACPI: This conflict may cause random problems and system instability
[ 19.152068] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.155852] it87 it87.656: Detected broken BIOS defaults, disabling PWM interface
[ 21.049232] EXT4-fs (sdb1): mounted filesystem with ordered data mode
[ 21.183675] EXT4-fs (sdb2): mounted filesystem with ordered data mode
[ 21.293167] EXT4-fs (sdb3): mounted filesystem with ordered data mode
[ 21.466009] EXT4-fs (sdb4): mounted filesystem with ordered data mode
[ 22.150222] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.698632] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 23.701681] 0000:01:00.0: eth0: 10/100 speed: disabling TSO
[ 23.705199] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.553281] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 30.673331] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 31.038121] fuse init (API version 7.13)
[ 32.090719] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 32.092055] 0000:02:00.0: eth1: 10/100 speed: disabling TSO
[ 32.094300] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 34.404071] eth0: no IPv6 routers present
[ 42.436064] eth1: no IPv6 routers present
[ 42.513064] wlan0: no IPv6 routers present
[ 72.001525] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 72.058421] nf_conntrack version 0.5.0 (16314 buckets, 65256 max)
[ 72.061192] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 72.063049] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 72.064347] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 89.793700] RPC: Registered udp transport module.
[ 89.795495] RPC: Registered tcp transport module.
[ 89.797240] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 89.854877] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 89.902551] svc: failed to register lockdv1 RPC service (errno 97).
[ 89.906995] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 89.910855] NFSD: starting 90-second grace period
[ 90.320108] Event-channel device installed.
[ 90.364283] XENBUS: Unable to read cpu state
[ 90.366462] XENBUS: Unable to read cpu state
[ 90.811765] Bridge firewalling registered
[ 91.121936] ADDRCONF(NETDEV_UP): peth1: link is not ready
[ 92.715640] e1000e: peth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 92.717062] 0000:02:00.0: peth1: 10/100 speed: disabling TSO
[ 92.723814] ADDRCONF(NETDEV_CHANGE): peth1: link becomes ready
[ 93.152206] device peth1 entered promiscuous mode
[ 93.198488] eth1: port 1(peth1) entering forwarding state
[ 103.044076] peth1: no IPv6 routers present
[ 103.881072] eth1: no IPv6 routers present
[ 126.166460] virbr0: starting userspace STP failed, starting kernel STP
[ 126.759180] Ebtables v2.0 registered
[ 127.114265] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 905.904174] device vif1.0 entered promiscuous mode
[ 905.909892] virbr0: topology change detected, propagating
[ 905.911757] virbr0: port 1(vif1.0) entering forwarding state
[ 905.917870] loop: module loaded
[ 915.921065] vif1.0: no IPv6 routers present
[ 916.895537] blkback: ring-ref 770, event-channel 9, protocol 3 (x86_64-abi)
[ 930.460719] virbr0: port 1(vif1.0) entering disabled state
[ 930.468400] virbr0: port 1(vif1.0) entering disabled state
[ 1169.220399] tun: Universal TUN/TAP device driver, 1.6
[ 1169.222114] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1169.264429] device tap2.0 entered promiscuous mode
[ 1169.279477] virbr0: topology change detected, propagating
[ 1169.281058] virbr0: port 1(tap2.0) entering forwarding state
[ 1169.443943] device vif2.0 entered promiscuous mode
[ 1169.457219] virbr0: port 1(tap2.0) entering disabled state
[ 1169.464390] virbr0: topology change detected, propagating
[ 1169.466185] virbr0: port 2(vif2.0) entering forwarding state
[ 1169.484657] virbr0: topology change detected, propagating
[ 1169.486488] virbr0: port 1(tap2.0) entering forwarding state
[ 1172.848056] hrtimer: interrupt took 2283856125 ns
[ 1175.458370] saa7146 (0) vpeirq: used 1 times >80% of buffer (1113900 bytes now)
[ 1210.374613] vif2.0: no IPv6 routers present
[ 1210.374619] tap2.0: no IPv6 routers present
[ 1210.376281] saa7146 (0) vpeirq: used 2 times >80% of buffer (575092 bytes now)
[ 1260.137497] saa7146 (0) vpeirq: used 2 times >80% of buffer (740908 bytes now)
[ 1297.648393] saa7146 (0) vpeirq: used 1 times >80% of buffer (85352 bytes now)
[ 1311.985216] virbr0: port 1(tap2.0) entering disabled state
[ 1312.000599] virbr0: port 1(tap2.0) entering disabled state
[ 1312.244630] virbr0: port 2(vif2.0) entering disabled state
[ 1312.256479] virbr0: port 2(vif2.0) entering disabled state
[ 1326.424963] saa7146 (0) vpeirq: used 2 times >80% of buffer (65048 bytes now)
[ 1416.275503] device tap3.0 entered promiscuous mode
[ 1416.277060] virbr0: topology change detected, propagating
[ 1416.277060] virbr0: port 1(tap3.0) entering forwarding state
[ 1416.492615] virbr0: port 1(tap3.0) entering disabled state
[ 1416.526143] virbr0: topology change detected, propagating
[ 1416.527796] virbr0: port 1(tap3.0) entering forwarding state
[ 1416.553710] device vif3.0 entered promiscuous mode
[ 1416.562676] virbr0: topology change detected, propagating
[ 1416.564318] virbr0: port 2(vif3.0) entering forwarding state
[ 1424.220546] saa7146 (0) vpeirq: used 1 times >80% of buffer (1345328 bytes now)
[ 1430.479973] vif3.0: no IPv6 routers present
[ 1440.046405] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1454.108787] saa7146 (0) vpeirq: used 10 times >80% of buffer (1244560 bytes now)
[ 1454.435359] tap3.0: no IPv6 routers present
[ 1467.745323] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1467.985651] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1468.226131] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1468.346413] DVB: TDA10021: tda10021_readreg: readreg error (ret == -5)
[ 1468.466672] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1468.706852] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1468.947740] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1469.187644] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1469.307792] DVB: TDA10021: tda10021_readreg: readreg error (ret == -5)
[ 1469.427962] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1469.668459] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1469.908705] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1470.149577] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1470.269517] tda10021: lock tuner fails
[ 1470.389697] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1470.630039] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1470.870956] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1471.110741] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1471.351494] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1471.591513] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1471.831835] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1472.072259] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1472.192420] tda10021: unlock tuner fails
[ 1472.312646] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1472.553549] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1472.793546] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1473.033812] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1473.154701] DVB: TDA10021(0): _tda10021_writereg, writereg error (reg == 0x03, val == 0x0a, ret == -5)
[ 1473.394290] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1473.634730] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1473.875316] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1474.115438] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1474.235813] DVB: TDA10021(0): _tda10021_writereg, writereg error (reg == 0x0a, val == 0xc4, ret == -5)
[ 1474.476057] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1474.716431] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1474.957672] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1475.197371] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1475.317568] DVB: TDA10021(0): _tda10021_writereg, writereg error (reg == 0x0b, val == 0x6d, ret == -5)
[ 1475.557776] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1527.377284] saa7146 (0) vpeirq: used 1 times >80% of buffer (1229896 bytes now)
[ 1565.293135] BUG: soft lockup - CPU#0 stuck for 63s! [qemu-dm:10941]
[ 1565.293135] Modules linked in: tun xt_physdev loop ip6table_filter ip6_tables ebtable_nat ebtables ipt_REJECT bridge stp xen_evtchn xenfs nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs xt_recent ipt_MASQUERADE xt_tcpudp xt_state iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables x_tables fuse ext4 jbd2 crc16 it87 hwmon_vid coretemp tda10021 snd_hda_codec_via snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi budget_av arc4 snd_rawmidi ecb snd_seq_midi_event snd_seq saa7146_vv videodev ath9k v4l1_compat mac80211 videobuf_dma_sg snd_timer videobuf_core ath budget_core snd_seq_device i915 dvb_core cfg80211 rfkill saa7146 drm_kms_helper ttpci_eeprom led_class pcspkr rng_core snd evdev i2c_i801 drm i2c_algo_bit soundcore snd_page_alloc i2c_core button processor video output acpi_processor ext3 jbd mbcache dm_mod sd_mod crc_t10dif ata_generic ata_piix uhci_hcd fan libata ehci_hcd scsi_mod e1000e usbcore nls_base thermal thermal_sys [last unloaded: scsi_wait_scan]
[ 1565.293135]
[ 1565.293135] Pid: 10941, comm: qemu-dm Not tainted (2.6.32-5-xen-686 #1) 945GM/E-ITE8712
[ 1565.293135] EIP: 0061:[<c1002227>] EFLAGS: 00200246 CPU: 0
[ 1565.293135] EIP is at hypercall_page+0x227/0x1001
[ 1565.293135] EAX: 00040001 EBX: 00000000 ECX: 00000000 EDX: c357d7b4
[ 1565.293135] ESI: 00000009 EDI: 00000028 EBP: c13959e4 ESP: dc879ac0
[ 1565.293135] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0069
[ 1565.293135] CR0: 8005003b CR2: b7815000 CR3: 1c993000 CR4: 00002660
[ 1565.297135] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 1565.297135] DR6: ffff0ff0 DR7: 00000400
[ 1565.297135] Call Trace:
[ 1565.297135] [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[ 1565.297135] [<c1006778>] ? check_events+0x8/0xc
[ 1565.297135] [<c1006737>] ? xen_irq_enable_direct_end+0x0/0x1
[ 1565.297135] [<c103c80b>] ? __do_softirq+0x4b/0x156
[ 1565.297135] [<c103c947>] ? do_softirq+0x31/0x3c
[ 1565.297135] [<c103ca21>] ? irq_exit+0x26/0x58
[ 1565.297135] [<c1199a16>] ? xen_evtchn_do_upcall+0x22/0x2c
[ 1565.297135] [<c1009b5f>] ? xen_do_upcall+0x7/0xc
[ 1565.297135] [<c10bc8b8>] ? fget_light+0x4b/0x77
[ 1565.297135] [<c10c79f5>] ? do_select+0x25e/0x42d
[ 1565.297135] [<c10c7f6a>] ? __pollwait+0x0/0xa5
[ 1565.297135] [<c10c800f>] ? pollwake+0x0/0x65
[ 1565.297135] [<c10c800f>] ? pollwake+0x0/0x65
[ 1565.297135] [<c10c800f>] ? pollwake+0x0/0x65
[ 1565.297135] [<c10c800f>] ? pollwake+0x0/0x65
[ 1565.297135] [<c10c800f>] ? pollwake+0x0/0x65
[ 1565.297135] [<c10c800f>] ? pollwake+0x0/0x65
[ 1565.297135] [<c1055fc0>] ? tick_program_event+0x1f/0x23
[ 1565.297135] [<c104de2d>] ? hrtimer_interrupt+0x117/0x1cf
[ 1565.297135] [<c10065af>] ? xen_timer_interrupt+0x248/0x257
[ 1565.297135] [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[ 1565.297135] [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[ 1565.297135] [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[ 1565.297135] [<c1006778>] ? check_events+0x8/0xc
[ 1565.297135] [<c100676f>] ? xen_restore_fl_direct_end+0x0/0x1
[ 1565.297135] [<c107653f>] ? check_for_new_grace_period+0x80/0x89
[ 1565.297135] [<c100676f>] ? xen_restore_fl_direct_end+0x0/0x1
[ 1565.297135] [<c107648f>] ? rcu_process_gp_end+0x33/0x63
[ 1565.297135] [<c107683d>] ? __rcu_process_callbacks+0x6c/0x227
[ 1565.297135] [<c1076a2b>] ? rcu_process_callbacks+0x33/0x39
[ 1565.297135] [<c103c8e8>] ? __do_softirq+0x128/0x156
[ 1565.297135] [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[ 1565.297135] [<c1006778>] ? check_events+0x8/0xc
[ 1565.297135] [<c100676f>] ? xen_restore_fl_direct_end+0x0/0x1
[ 1565.297135] [<c103c94f>] ? do_softirq+0x39/0x3c
[ 1565.297135] [<c103ca31>] ? irq_exit+0x36/0x58
[ 1565.297135] [<c1199a16>] ? xen_evtchn_do_upcall+0x22/0x2c
[ 1565.297135] [<c1009b5f>] ? xen_do_upcall+0x7/0xc
[ 1565.297135] [<c10c7d02>] ? core_sys_select+0x13e/0x1c2
[ 1565.297135] [<c100676f>] ? xen_restore_fl_direct_end+0x0/0x1
[ 1565.297135] [<c109330d>] ? get_page_from_freelist+0x2ab/0x3c7
[ 1565.297135] [<c1144853>] ? copy_from_user+0x27/0x10e
[ 1565.297135] [<f8978d43>] ? privcmd_ioctl+0x6f/0x34e [xenfs]
[ 1565.297135] [<f8bc7015>] ? HYPERVISOR_event_channel_op+0x15/0x4c [xen_evtchn]
[ 1565.297135] [<f8bc74d9>] ? evtchn_ioctl+0x283/0x28c [xen_evtchn]
[ 1565.297135] [<c1021407>] ? pvclock_clocksource_read+0xf9/0x10f
[ 1565.297135] [<c10526bc>] ? ktime_get_ts+0xcd/0xd5
[ 1565.297135] [<c10c7f49>] ? sys_select+0x6e/0x8f
[ 1565.297135] [<c1008ebb>] ? sysenter_do_call+0x12/0x28
[ 1565.455372] saa7146 (0) vpeirq: used 1 times >80% of buffer (616828 bytes now)
[ 1582.434416] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1583.936868] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1586.941631] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1588.804591] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1599.621480] saa7146 (0) vpeirq: used 1 times >80% of buffer (1130820 bytes now)
[ 1628.343801] DVB: TDA10021: tda10021_readreg: readreg error (ret == -5)
[ 1628.464993] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1628.704177] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1628.944676] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1629.184982] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1629.305264] tda10021: lock tuner fails
[ 1629.426010] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1629.666341] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1629.906212] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1630.146553] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1630.386937] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1630.627439] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1630.868188] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1631.108182] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1631.228365] tda10021: unlock tuner fails
[ 1631.348687] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1631.588925] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1631.829496] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1632.069754] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1632.190510] DVB: TDA10021(0): _tda10021_writereg, writereg error (reg == 0x03, val == 0x0a, ret == -5)
[ 1632.430375] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1632.670718] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1632.911639] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1633.151503] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1633.271732] DVB: TDA10021(0): _tda10021_writereg, writereg error (reg == 0x0a, val == 0xc4, ret == -5)
[ 1633.512786] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1633.752430] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1633.993019] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1634.233253] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1634.353902] DVB: TDA10021(0): _tda10021_writereg, writereg error (reg == 0x0b, val == 0x6d, ret == -5)
[ 1634.593772] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1634.834171] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1635.075061] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1635.314891] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1635.435181] DVB: TDA10021(0): _tda10021_writereg, writereg error (reg == 0x0c, val == 0x1e, ret == -5)
[ 1635.675464] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1635.915814] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1636.156389] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1636.396591] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
[ 1636.517254] DVB: TDA10021(0): _tda10021_writereg, writereg error (reg == 0x0d, val == 0x87, ret == -5)
[ 1636.400327] BUG: soft lockup - CPU#0 stuck for 66s! [qemu-dm:10941]
[ 1636.400327] Modules linked in: tun xt_physdev loop ip6table_filter ip6_tables ebtable_nat ebtables ipt_REJECT bridge stp xen_evtchn xenfs nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs xt_recent ipt_MASQUERADE xt_tcpudp xt_state iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables x_tables fuse ext4 jbd2 crc16 it87 hwmon_vid coretemp tda10021 snd_hda_codec_via snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi budget_av arc4 snd_rawmidi ecb snd_seq_midi_event snd_seq saa7146_vv videodev ath9k v4l1_compat mac80211 videobuf_dma_sg snd_timer videobuf_core ath budget_core snd_seq_device i915 dvb_core cfg80211 rfkill saa7146 drm_kms_helper ttpci_eeprom led_class pcspkr rng_core snd evdev i2c_i801 drm i2c_algo_bit soundcore snd_page_alloc i2c_core button processor video output acpi_processor ext3 jbd mbcache dm_mod sd_mod crc_t10dif ata_generic ata_piix uhci_hcd fan libata ehci_hcd scsi_mod e1000e usbcore nls_base thermal thermal_sys [last unloaded: scsi_wait_scan]
[ 1636.400327]
[ 1636.400327] Pid: 10941, comm: qemu-dm Not tainted (2.6.32-5-xen-686 #1) 945GM/E-ITE8712
[ 1636.400327] EIP: 0061:[<c128f20a>] EFLAGS: 00200297 CPU: 0
[ 1636.400327] EIP is at _spin_lock+0x12/0x15
[ 1636.400327] EAX: c2a2bcc8 EBX: f8682000 ECX: 000002e4 EDX: 00003f3e
[ 1636.400327] ESI: c2a2badc EDI: 000002e4 EBP: 000000bc ESP: dc879a58
[ 1636.400327] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0069
[ 1636.400327] CR0: 8005003b CR2: 08cf204c CR3: 1c993000 CR4: 00002660
[ 1636.400327] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 1636.400327] DR6: ffff0ff0 DR7: 00000400
[ 1636.400327] Call Trace:
[ 1636.400327] [<f7f6b50d>] ? dvb_dmx_swfilter_packets+0x14/0x3b [dvb_core]
[ 1636.400327] [<f7df6b96>] ? vpeirq+0x107/0x16c [budget_core]
[ 1636.400327] [<c103b702>] ? tasklet_action+0x67/0xad
[ 1636.400327] [<c103c86a>] ? __do_softirq+0xaa/0x156
[ 1636.400327] [<c103c947>] ? do_softirq+0x31/0x3c
[ 1636.400327] [<c103ca21>] ? irq_exit+0x26/0x58
[ 1636.400327] [<c1199a16>] ? xen_evtchn_do_upcall+0x22/0x2c
[ 1636.400327] [<c1009b5f>] ? xen_do_upcall+0x7/0xc
[ 1636.400327] [<c1002227>] ? hypercall_page+0x227/0x1001
[ 1636.400327] [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[ 1636.400327] [<c1006778>] ? check_events+0x8/0xc
[ 1636.400327] [<c100676f>] ? xen_restore_fl_direct_end+0x0/0x1
[ 1636.400327] [<c128f229>] ? _spin_unlock_irqrestore+0xd/0xf
[ 1636.400327] [<c121e99b>] ? tcp_poll+0x15/0x134
[ 1636.400327] [<c11eb4a9>] ? sock_poll+0xc/0xe
[ 1636.400327] [<c10c7a38>] ? do_select+0x2a1/0x42d
[ 1636.400327] [<c10c7f6a>] ? __pollwait+0x0/0xa5
[ 1636.400327] [<c10c800f>] ? pollwake+0x0/0x65
[ 1636.400327] [<c10c800f>] ? pollwake+0x0/0x65
[ 1636.400327] [<c10c800f>] ? pollwake+0x0/0x65
[ 1636.400327] [<c10c800f>] ? pollwake+0x0/0x65
[ 1636.400327] [<c10c800f>] ? pollwake+0x0/0x65
[ 1636.400327] [<c10c800f>] ? pollwake+0x0/0x65
[ 1636.400327] [<c1026b2c>] ? resched_task+0x58/0x5a
[ 1636.400327] [<c102c2e1>] ? check_preempt_wakeup+0x196/0x202
[ 1636.400327] [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[ 1636.400327] [<c1006778>] ? check_events+0x8/0xc
[ 1636.400327] [<c100676f>] ? xen_restore_fl_direct_end+0x0/0x1
[ 1636.400327] [<c128f229>] ? _spin_unlock_irqrestore+0xd/0xf
[ 1636.400327] [<c1034572>] ? try_to_wake_up+0x2a7/0x2b3
[ 1636.400327] [<c10c806b>] ? pollwake+0x5c/0x65
[ 1636.400327] [<c103457e>] ? default_wake_function+0x0/0x8
[ 1636.400327] [<c10278dd>] ? __wake_up_common+0x34/0x59
[ 1636.400327] [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[ 1636.400327] [<c1006778>] ? check_events+0x8/0xc
[ 1636.400327] [<c100676f>] ? xen_restore_fl_direct_end+0x0/0x1
[ 1636.400327] [<c128f229>] ? _spin_unlock_irqrestore+0xd/0xf
[ 1636.400327] [<f7f6979f>] ? dvb_dmxdev_ts_callback+0x93/0x9c [dvb_core]
[ 1636.400327] [<f7f6b009>] ? dvb_dmx_swfilter_packet+0x20e/0x3cf [dvb_core]
[ 1636.400327] [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[ 1636.400327] [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[ 1636.400327] [<c1006778>] ? check_events+0x8/0xc
[ 1636.400327] [<f8bc7828>] ? evtchn_interrupt+0xa6/0xc2 [xen_evtchn]
[ 1636.400327] [<c1073c62>] ? handle_IRQ_event+0xf7/0x101
[ 1636.400327] [<c1144853>] ? copy_from_user+0x27/0x10e
[ 1636.400327] [<c10c7d02>] ? core_sys_select+0x13e/0x1c2
[ 1636.400327] [<c100676f>] ? xen_restore_fl_direct_end+0x0/0x1
[ 1636.400327] [<c109330d>] ? get_page_from_freelist+0x2ab/0x3c7
[ 1636.400327] [<c1144853>] ? copy_from_user+0x27/0x10e
[ 1636.400327] [<f8978d43>] ? privcmd_ioctl+0x6f/0x34e [xenfs]
[ 1636.400327] [<f8bc7015>] ? HYPERVISOR_event_channel_op+0x15/0x4c [xen_evtchn]
[ 1636.400327] [<f8bc74d9>] ? evtchn_ioctl+0x283/0x28c [xen_evtchn]
[ 1636.400327] [<c1021407>] ? pvclock_clocksource_read+0xf9/0x10f
[ 1636.400327] [<c10526bc>] ? ktime_get_ts+0xcd/0xd5
[ 1636.400327] [<c10c7f49>] ? sys_select+0x6e/0x8f
[ 1636.400327] [<c1008ebb>] ? sysenter_do_call+0x12/0x28
[ 1636.907386] saa7146 (0) vpeirq: used 1 times >80% of buffer (1208464 bytes now)
[ 1666.883364] saa7146 (0) vpeirq: used 1 times >80% of buffer (46812 bytes now)
[-- Attachment #3: xm_dmesg_4.1_amd64_loglvl=all_HVM-booted --]
[-- Type: text/plain, Size: 11070 bytes --]
(XEN) Xen version 4.1.0 (Debian 4.1.0-1) (waldi@debian.org) (gcc version 4.5.2 (Debian 4.5.2-7) ) Sun Mar 27 18:23:30 UTC 2011
(XEN) Bootloader: GRUB 1.98+20100804-14
(XEN) Command line: placeholder cpufreq=xen cpuidle dom0_mem=1024M loglvl=all guest_loglvl=all
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009f000 (usable)
(XEN) 000000000009f000 - 00000000000a0000 (reserved)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000007f690000 (usable)
(XEN) 000000007f690000 - 000000007f6e0000 (reserved)
(XEN) 000000007f6e0000 - 000000007f6e3000 (ACPI NVS)
(XEN) 000000007f6e3000 - 000000007f6f0000 (ACPI data)
(XEN) 000000007f6f0000 - 000000007f700000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 0000000100000000 (reserved)
(XEN) System RAM: 2038MB (2087100kB)
(XEN) ACPI: RSDP 000F7C90, 0014 (r0 IntelR)
(XEN) ACPI: RSDT 7F6E3000, 0038 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
(XEN) ACPI: FACP 7F6E3080, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
(XEN) ACPI: DSDT 7F6E3100, 5122 (r1 INTELR AWRDACPI 1000 MSFT 3000000)
(XEN) ACPI: FACS 7F6E0000, 0040
(XEN) ACPI: IDTS 7F6E82C0, 0028 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
(XEN) ACPI: MCFG 7F6E8300, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
(XEN) ACPI: APIC 7F6E8240, 0068 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
(XEN) ACPI: SSDT 7F6E89A0, 0482 (r1 PmRef CpuPm 3000 INTL 20050930)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-000000007f690000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f38d0
(XEN) DMI 2.2 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x408
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0]
(XEN) ACPI: wakeup_vec[7f6e000c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 6:15 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) Table is not found!
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) IRQ limits: 24 GSI, 376 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 1995.059 MHz processor.
(XEN) Initing memory sharing.
(XEN) mce_intel.c:1162: MCA Capability: BCAST 1 SER 0 CMCI 0 firstbank 1 extended MCE MSR 0
(XEN) Intel machine check reporting enabled
(XEN) I/O virtualisation disabled
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 3.579MHz ACPI PM Timer
(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC TPR shadow
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs disabled.
(XEN) HVM: VMX enabled
(XEN) Brought up 2 CPUs
(XEN) HPET broadcast init failed, turn to PIT broadcast.
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x1000000 -> 0x1651000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000007a000000->000000007c000000 (248320 pages to be allocated)
(XEN) Init. ramdisk: 000000007dc00000->000000007f1ffc00
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: 00000000c1000000->00000000c1651000
(XEN) Init. ramdisk: 00000000c1651000->00000000c2c50c00
(XEN) Phys-Mach map: 00000000c2c51000->00000000c2d51000
(XEN) Start info: 00000000c2d51000->00000000c2d514b4
(XEN) Page tables: 00000000c2d52000->00000000c2d70000
(XEN) Boot stack: 00000000c2d70000->00000000c2d71000
(XEN) TOTAL: 00000000c0000000->00000000c3000000
(XEN) ENTRY ADDRESS: 00000000c13ff000
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM: .........done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 220kB init memory.
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:02.0
(XEN) PCI add device 00:1b.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.1
(XEN) PCI add device 00:1c.2
(XEN) PCI add device 00:1c.3
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) PCI add device 00:1d.2
(XEN) PCI add device 00:1d.3
(XEN) PCI add device 00:1d.7
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.1
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 01:00.0
(XEN) PCI add device 02:00.0
(XEN) PCI add device 03:00.0
(XEN) PCI add device 04:00.0
(XEN) PCI add device 05:00.0
(XEN) PCI add device 05:02.0
(XEN) HVM2: HVM Loader
(XEN) HVM2: Detected Xen v4.1.0
(XEN) HVM2: CPU speed is 1995 MHz
(XEN) irq.c:258: Dom2 PCI link 0 changed 0 -> 5
(XEN) HVM2: PCI-ISA link 0 routed to IRQ5
(XEN) irq.c:258: Dom2 PCI link 1 changed 0 -> 10
(XEN) HVM2: PCI-ISA link 1 routed to IRQ10
(XEN) irq.c:258: Dom2 PCI link 2 changed 0 -> 11
(XEN) HVM2: PCI-ISA link 2 routed to IRQ11
(XEN) irq.c:258: Dom2 PCI link 3 changed 0 -> 5
(XEN) HVM2: PCI-ISA link 3 routed to IRQ5
(XEN) HVM2: pci dev 01:2 INTD->IRQ5
(XEN) HVM2: pci dev 01:3 INTA->IRQ10
(XEN) HVM2: pci dev 03:0 INTA->IRQ5
(XEN) HVM2: pci dev 04:0 INTA->IRQ5
(XEN) HVM2: pci dev 02:0 bar 10 size 02000000: f0000008
(XEN) HVM2: pci dev 03:0 bar 14 size 01000000: f2000008
(XEN) HVM2: pci dev 02:0 bar 14 size 00001000: f3000000
(XEN) HVM2: pci dev 03:0 bar 10 size 00000100: 0000c001
(XEN) HVM2: pci dev 04:0 bar 10 size 00000100: 0000c101
(XEN) HVM2: pci dev 04:0 bar 14 size 00000100: f3001000
(XEN) HVM2: pci dev 01:2 bar 20 size 00000020: 0000c201
(XEN) HVM2: pci dev 01:1 bar 20 size 00000010: 0000c221
(XEN) HVM2: Multiprocessor initialisation:
(XEN) HVM2: - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs [2/8] ... done.
(XEN) HVM2: Writing SMBIOS tables ...
(XEN) HVM2: Loading ROMBIOS ...
(XEN) HVM2: 10588 bytes of ROMBIOS high-memory extensions:
(XEN) HVM2: Relocating to 0xfc000000-0xfc00295c ... done
(XEN) HVM2: Creating MP tables ...
(XEN) HVM2: Loading Cirrus VGABIOS ...
(XEN) HVM2: Loading PCI Option ROM ...
(XEN) HVM2: - Manufacturer: http://etherboot.org
(XEN) HVM2: - Product name: gPXE
(XEN) HVM2: Loading ACPI ...
(XEN) HVM2: - Lo data: 000ea020-000ea04f
(XEN) HVM2: - Hi data: fc002c00-fc012d1f
(XEN) HVM2: vm86 TSS at fc013000
(XEN) HVM2: BIOS map:
(XEN) HVM2: c0000-c8fff: VGA BIOS
(XEN) HVM2: c9000-d57ff: Etherboot ROM
(XEN) HVM2: eb000-eb140: SMBIOS tables
(XEN) HVM2: f0000-fffff: Main BIOS
(XEN) HVM2: Invoking ROMBIOS ...
(XEN) HVM2: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
(XEN) stdvga.c:147:d2 entering stdvga and caching modes
(XEN) HVM2: VGABios $Id: vgabios.c,v 1.67 2008/01/27 09:44:12 vruppert Exp $
(XEN) HVM2: Bochs BIOS - build: 06/23/99
(XEN) HVM2: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
(XEN) HVM2: Options: apmbios pcibios eltorito PMM
(XEN) HVM2:
(XEN) HVM2: ata0-0: PCHS=4161/16/63 translation=lba LCHS=520/128/63
(XEN) HVM2: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (2048 MBytes)
(XEN) HVM2: IDE time out
(XEN) HVM2: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom
(XEN) HVM2: IDE time out
(XEN) HVM2:
(XEN) HVM2:
(XEN) HVM2:
(XEN) HVM2: Press F12 for boot menu.
(XEN) HVM2:
(XEN) HVM2: Booting from CD-Rom...
(XEN) HVM2: 605MB medium detected
(XEN) HVM2: Booting from 0000:7c00
(XEN) HVM3: HVM Loader
(XEN) HVM3: Detected Xen v4.1.0
(XEN) HVM3: CPU speed is 1995 MHz
(XEN) irq.c:258: Dom3 PCI link 0 changed 0 -> 5
(XEN) HVM3: PCI-ISA link 0 routed to IRQ5
(XEN) irq.c:258: Dom3 PCI link 1 changed 0 -> 10
(XEN) HVM3: PCI-ISA link 1 routed to IRQ10
(XEN) irq.c:258: Dom3 PCI link 2 changed 0 -> 11
(XEN) HVM3: PCI-ISA link 2 routed to IRQ11
(XEN) irq.c:258: Dom3 PCI link 3 changed 0 -> 5
(XEN) HVM3: PCI-ISA link 3 routed to IRQ5
(XEN) HVM3: pci dev 01:2 INTD->IRQ5
(XEN) HVM3: pci dev 01:3 INTA->IRQ10
(XEN) HVM3: pci dev 03:0 INTA->IRQ5
(XEN) HVM3: pci dev 04:0 INTA->IRQ5
(XEN) HVM3: pci dev 02:0 bar 10 size 02000000: f0000008
(XEN) HVM3: pci dev 03:0 bar 14 size 01000000: f2000008
(XEN) HVM3: pci dev 02:0 bar 14 size 00001000: f3000000
(XEN) HVM3: pci dev 03:0 bar 10 size 00000100: 0000c001
(XEN) HVM3: pci dev 04:0 bar 10 size 00000100: 0000c101
(XEN) HVM3: pci dev 04:0 bar 14 size 00000100: f3001000
(XEN) HVM3: pci dev 01:2 bar 20 size 00000020: 0000c201
(XEN) HVM3: pci dev 01:1 bar 20 size 00000010: 0000c221
(XEN) HVM3: Multiprocessor initialisation:
(XEN) HVM3: - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs [2/8] ... done.
(XEN) HVM3: Writing SMBIOS tables ...
(XEN) HVM3: Loading ROMBIOS ...
(XEN) HVM3: 10588 bytes of ROMBIOS high-memory extensions:
(XEN) HVM3: Relocating to 0xfc000000-0xfc00295c ... done
(XEN) HVM3: Creating MP tables ...
(XEN) HVM3: Loading Cirrus VGABIOS ...
(XEN) HVM3: Loading PCI Option ROM ...
(XEN) HVM3: - Manufacturer: http://etherboot.org
(XEN) HVM3: - Product name: gPXE
(XEN) HVM3: Loading ACPI ...
(XEN) HVM3: - Lo data: 000ea020-000ea04f
(XEN) HVM3: - Hi data: fc002c00-fc012d1f
(XEN) HVM3: vm86 TSS at fc013000
(XEN) HVM3: BIOS map:
(XEN) HVM3: c0000-c8fff: VGA BIOS
(XEN) HVM3: c9000-d57ff: Etherboot ROM
(XEN) HVM3: eb000-eb140: SMBIOS tables
(XEN) HVM3: f0000-fffff: Main BIOS
(XEN) HVM3: Invoking ROMBIOS ...
(XEN) HVM3: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
(XEN) stdvga.c:147:d3 entering stdvga and caching modes
(XEN) HVM3: VGABios $Id: vgabios.c,v 1.67 2008/01/27 09:44:12 vruppert Exp $
(XEN) HVM3: Bochs BIOS - build: 06/23/99
(XEN) HVM3: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
(XEN) HVM3: Options: apmbios pcibios eltorito PMM
(XEN) HVM3:
(XEN) HVM3: ata0-0: PCHS=4161/16/63 translation=lba LCHS=520/128/63
(XEN) HVM3: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (2048 MBytes)
(XEN) HVM3: IDE time out
(XEN) HVM3: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom
(XEN) HVM3: IDE time out
(XEN) HVM3:
(XEN) HVM3:
(XEN) HVM3:
(XEN) HVM3: Press F12 for boot menu.
(XEN) HVM3:
(XEN) HVM3: Booting from CD-Rom...
(XEN) HVM3: 605MB medium detected
(XEN) HVM3: Booting from 0000:7c00
[-- Attachment #4: virt-install-command --]
[-- Type: text/plain, Size: 158 bytes --]
virt-install --hvm --connect xen:/// --name AK-edge --ram 512 --file /home/guest1.dsk --network network:default --cdrom /home/GWAY-4.2.15-037-BarracudaNG.iso
[-- Attachment #5: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
next prev parent reply other threads:[~2011-04-18 22:23 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-13 18:20 on starting HVM-domU whole system freezes with "soft lockup - CPU X stuck for XXs! [qemu-dm:...]" [xen 4.0, xen 4.1] MadLoisae
2011-04-13 18:44 ` Keir Fraser
2011-04-13 21:38 ` MadLoisae
2011-04-13 22:04 ` Keir Fraser
2011-04-14 13:23 ` Konrad Rzeszutek Wilk
2011-04-15 22:11 ` MadLoisae
2011-04-18 21:02 ` Konrad Rzeszutek Wilk
2011-04-18 22:23 ` MadLoisae [this message]
2011-04-18 22:35 ` MadLoisae
2011-04-19 13:28 ` Konrad Rzeszutek Wilk
2011-04-19 19:16 ` MadLoisae
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DACB9CF.1000303@gmx.net \
--to=madloisae@gmx.net \
--cc=keir.xen@gmail.com \
--cc=konrad.wilk@oracle.com \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).