From: Anthony Wright <anthony@overnetdata.com>
To: Konrad Rzeszutek Wilk <konrad@darnok.org>
Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>
Subject: Re: VGA Passthrough crashes machine
Date: Mon, 19 Dec 2011 15:32:51 +0000 [thread overview]
Message-ID: <4EEF5923.1050307@overnetdata.com> (raw)
In-Reply-To: <20111215211218.GA15407@andromeda.dapyr.net>
[-- Attachment #1: Type: text/plain, Size: 3534 bytes --]
On 15/12/2011 21:12, Konrad Rzeszutek Wilk wrote:
> On Thu, Dec 15, 2011 at 03:54:00PM +0000, Anthony Wright wrote:
>> On 14/12/2011 21:38, Konrad Rzeszutek Wilk wrote:
>>> On Thu, Dec 08, 2011 at 12:00:07PM +0000, Anthony Wright wrote:
>>>> I've just had my first attempt at getting VGA passthrough to work, and
>>>> it crashed the machine. I'm trying to understand whether this is a
>>>> problem with my hardware, configuration or a software problem.
>>>>
>>>> I'm running Xen 4.1.2 with Linux 3.1.2
>>>>
>>>>
>>>> The CPU is an Intel Core i5-650
>>>> http://ark.intel.com/products/43546/Intel-Core-i5-650-Processor-%284M-Cache-3_20-GHz%29
>>> And what is your motherboard? Does it have VT-d?
>> That was the important question... I'd missed the BIOS option to enable
>> VT-d which was disabled by default. I enabled the BIOS option and
>> everything worked, and it's very cool. :-)
>>
>> This does beg a couple of other questions though....
>>
>> Shouldn't I get a nice(ish) error message if I try to start a VGA
>> passthrough VM on hardware that doesn't support it rather than crashing
>> the machine?
>
> There is this http://wiki.xen.org/xenwiki/VTdHowTo which gives you a
> nice idea of what works.
Unfortunately I spoke a little too soon. I'm running with a Windows 7
Pro, 32 bit iso image, to install a new version of windows into the VM.
It seems to start nicely and I get a pulsing windows logo on the screen,
but it never progresses to the next page, and the VM consumes a huge
amount of CPU. If I run it purely in a VNC session, everything runs
smoothly and quickly. We noticed that there are a lot of VT-d features
disabled, and wondered if this might be the cause. The motherboard is an
intel DQ57TM, and the processor is an Intel Core i5-650, I have enabled
VT-d and FLR within the motherboard which seem to be the only relevant
motherboard switches.
Inside xl dmesg all the additional VT-d features are not enabled (Snoop
Control, Dom0 DMA Passthrough, Queued Invalidation, Interrupt Remapping,
Shared EPT tables) and I wondered if this was the problem. I tried
starting with iommu=1 on the xen command line and without it. The output
from xl dmesg is very similar and the VM behaves the same in both cases,
but I get a number of iommu.c errors messages when the 'iommu=1'
parameter is present. In both cases Xen also outputs a number of mm.c
errors which is similar to a problem I reported a while ago. I have
attach xl dmesg logs from both cases.
>> Can I tell whether hardware will support VGA passthrough without trying
>> to start a VM that uses it?
>>
>> Also when I shut down the VM I have to use 'xl destroy' as I'm testing
>> with Windows. After issuing the 'xl destroy' there is a long pause and
>> then the error:
>>
>> libxl: error: libxl_device.c:470:libxl__wait_for_device_model Device
>> Model not ready
>> libxl: error: libxl_pci.c:892:do_pci_remove Device Model didn't
>> respond in time
>>
>> If I pass through more than one device, I get the pause and the message
>> for each device.
> Hm, it looks to be sending 'pci-rem' to the XenStore, but I am not sure
> if QEMU understands it. Did you compile Xen 4.1.2 by yourself? Did it
> compile with CONFIG_PASSTHROUGH?
>
> You should see some messages in the qemu.log about hot-remove and such.
Yes I compiled Xen 4.1.2 by myself, but I don't know is
CONFIG_PASSTHROUGH is enabled or not - there's no mention of it in the
build logs. I see a hot-remove entry in the qemu log, and have attached
the whole log as it's not very long.
Anthony.
[-- Attachment #2: qemu-dm-16-2.log --]
[-- Type: text/plain, Size: 7323 bytes --]
domid: 1
Using file /dev/Master/Disk-root-16-0001 in read-write mode
Strip off blktap sub-type prefix to /workspace/agent/appliance/861ae470cd891983dbad195388406b86/1/win7-pro-32.iso (drv 'aio')
Using file /workspace/agent/appliance/861ae470cd891983dbad195388406b86/1/win7-pro-32.iso in read-only mode
Watching /local/domain/0/device-model/1/logdirty/cmd
Watching /local/domain/0/device-model/1/command
Watching /local/domain/1/cpu
char device redirected to /dev/pts/2
qemu_map_cache_init nr_buckets = 4000 size 327680
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = 8c233cf4-fd06-4471-a242-0795bb7ca56e
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/1/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error. /vm/8c233cf4-fd06-4471-a242-0795bb7ca56e/vncpasswd.
medium change watch on `hdb' (index: 1): aio:/workspace/agent/appliance/861ae470cd891983dbad195388406b86/1/win7-pro-32.iso
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
vcpu-set: watch node error.
xs_read(/local/domain/1/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/1/log-throttling'
medium change watch on `/local/domain/1/log-throttling' - unknown device, ignored
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 00:02.0 ...
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x0:0x2.0x0
pt_register_regions: IO region registered (size=0x00400000 base_addr=0xfe000004)
pt_register_regions: IO region registered (size=0x10000000 base_addr=0xd000000c)
pt_register_regions: IO region registered (size=0x00000008 base_addr=0x0000f161)
setup_vga_pt: vga bios checksum is adjusted!
pt_msi_setup: msi mapped with pirq 37
pci_intx: intx=1
register_real_device: Real physical device 00:02.0 registered successfuly!
IRQ type = MSI-INTx
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=2 val=ffff8086
igd_pci_read: pci_config_read: 0:0.0: addr=2 len=2 val=ffff0040
pt_iomem_map: e_phys=e0000000 maddr=d0000000 type=8 len=268435456 index=2 first_map=1
pt_iomem_map: e_phys=f1000000 maddr=fe000000 type=0 len=4194304 index=0 first_map=1
pt_ioport_map: e_phys=c330 pio_base=f160 len=8 index=4 first_map=1
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=2 val=ffff8086
igd_pci_read: pci_config_read: 0:0.0: addr=2 len=2 val=ffff0040
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=2 val=ffff8086
igd_pci_read: pci_config_read: 0:0.0: addr=2 len=2 val=ffff0040
igd_pci_read: pci_config_read: 0:0.0: addr=52 len=2 val=ffff0b50
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.
igd_pci_read: pci_config_read: 0:0.0: addr=2 len=2 val=ffff0040
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=2 val=ffff8086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=2 val=ffff8086
igd_pci_read: pci_config_read: 0:0.0: addr=2 len=2 val=ffff0040
pt_iomem_map: e_phys=ffffffff maddr=fe000000 type=0 len=4194304 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=d0000000 type=8 len=268435456 index=2 first_map=0
pt_ioport_map: e_phys=ffff pio_base=f160 len=8 index=4 first_map=0
pt_iomem_map: e_phys=f1000000 maddr=fe000000 type=0 len=4194304 index=0 first_map=0
pt_iomem_map: e_phys=e0000000 maddr=d0000000 type=8 len=268435456 index=2 first_map=0
pt_ioport_map: e_phys=c330 pio_base=f160 len=8 index=4 first_map=0
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=2 val=ffff8086
igd_pci_read: pci_config_read: 0:0.0: addr=2 len=2 val=ffff0040
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=2 val=ffff8086
igd_pci_read: pci_config_read: 0:0.0: addr=2 len=2 val=ffff0040
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=2 val=ffff8086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=2 val=ffff8086
igd_pci_read: pci_config_read: 0:0.0: addr=2 len=2 val=ffff0040
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=4 val=408086
dm-command: hot remove pass-through pci dev
generate a sci for PHP.
deassert due to disable GPE bit.
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=2 val=ffff8086
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=2 val=ffff8086
igd_pci_read: pci_config_read: 0:0.0: addr=2 len=2 val=ffff0040
[-- Attachment #3: xl-dmesg-blank --]
[-- Type: text/plain, Size: 5970 bytes --]
__ __ _ _ _ ____
\ \/ /___ _ __ | || | / | |___ \
\ // _ \ '_ \ | || |_ | | __) |
/ \ __/ | | | |__ _|| |_ / __/
/_/\_\___|_| |_| |_|(_)_(_)_____|
(XEN) Xen version 4.1.2 (@[unknown]) (gcc version 4.4.3 (GCC) ) Thu Dec 8 10:35:43 GMT 2011
(XEN) Latest ChangeSet: unavailable
(XEN) Bootloader: GNU GRUB 0.97
(XEN) Command line: dom0_mem=800M sched=credit
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009c000 (usable)
(XEN) 000000000009c000 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cb40c000 (usable)
(XEN) 00000000cb40c000 - 00000000cb44f000 (ACPI NVS)
(XEN) 00000000cb44f000 - 00000000cb4dd000 (reserved)
(XEN) 00000000cb4dd000 - 00000000cb4f1000 (ACPI NVS)
(XEN) 00000000cb4f1000 - 00000000cb4f3000 (usable)
(XEN) 00000000cb4f3000 - 00000000cb5f9000 (reserved)
(XEN) 00000000cb5f9000 - 00000000cb5fa000 (usable)
(XEN) 00000000cb5fa000 - 00000000cb5ff000 (reserved)
(XEN) 00000000cb5ff000 - 00000000cb600000 (ACPI NVS)
(XEN) 00000000cb600000 - 00000000cb608000 (ACPI data)
(XEN) 00000000cb608000 - 00000000cb609000 (ACPI NVS)
(XEN) 00000000cb609000 - 00000000cb60b000 (ACPI data)
(XEN) 00000000cb60b000 - 00000000cb624000 (ACPI NVS)
(XEN) 00000000cb624000 - 00000000cb645000 (reserved)
(XEN) 00000000cb645000 - 00000000cb688000 (ACPI NVS)
(XEN) 00000000cb688000 - 00000000cb800000 (usable)
(XEN) 00000000cdc00000 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000e4000000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed40000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 00000001fc000000 (usable)
(XEN) 00000001fc000000 - 0000000200000000 (reserved)
(XEN) 0000000200000000 - 000000022c000000 (usable)
(XEN) System RAM: 7989MB (8180876kB)
(XEN) ACPI: RSDP 000F0410, 0024 (r2 INTEL)
(XEN) ACPI: XSDT CB609E18, 005C (r1 INTEL DQ57TM 1072009 MSFT 10013)
(XEN) ACPI: FACP CB607D98, 00F4 (r4 INTEL DQ57TM 1072009 MSFT 10013)
(XEN) ACPI: DSDT CB600018, 6CEA (r1 INTEL DQ57TM 0 INTL 20051117)
(XEN) ACPI: FACS CB608E40, 0040
(XEN) ACPI: APIC CB607F18, 00CC (r2 INTEL DQ57TM 1072009 MSFT 10013)
(XEN) ACPI: SSDT CB607C18, 014E (r1 INTEL DQ57TM 1 MSFT 3000001)
(XEN) ACPI: MCFG CB60AF18, 003C (r1 INTEL DQ57TM 1072009 MSFT 97)
(XEN) ACPI: ASF! CB609C18, 00A0 (r32 INTEL DQ57TM 1 TFSM F4240)
(XEN) ACPI: TCPA CB60AE98, 0032 (r2 INTEL DQ57TM 1 MSFT 1000013)
(XEN) ACPI: DMAR CB609B18, 00B8 (r1 INTEL DQ57TM 1 INTL 1)
(XEN) Xen heap: 9MB (9784kB)
(XEN) Domain heap initialised
(XEN) ACPI: 32/64X FACS address mismatch in FADT - cb608f40/00000000cb608e40, using 32
(XEN) Processor #0 6:5 APIC version 21
(XEN) Processor #1 6:5 APIC version 21
(XEN) Processor #4 6:5 APIC version 21
(XEN) Processor #5 6:5 APIC version 21
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Table is not found!
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3192.077 MHz processor.
(XEN) Intel VT-d Snoop Control not enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation not enabled.
(XEN) Intel VT-d Interrupt Remapping not enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) Platform timer is 3.579MHz ACPI PM Timer
(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) EPT supports 2MB super page.
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Brought up 4 CPUs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 32-bit, PAE, lsb
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x1000000 -> 0x1b76000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000224000000->0000000226000000 (194067 pages to be allocated)
(XEN) Init. ramdisk: 000000022b613000->000000022bfffb85
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c1000000->c1b76000
(XEN) Init. ramdisk: c1b76000->c2562b85
(XEN) Phys-Mach map: c2563000->c262b000
(XEN) Start info: c262b000->c262b47c
(XEN) Page tables: c262c000->c2645000
(XEN) Boot stack: c2645000->c2646000
(XEN) TOTAL: c0000000->c2800000
(XEN) ENTRY ADDRESS: c1779000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) Scrubbing Free RAM: .......................................................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 176kB init memory.
(XEN) mm.c:907:d0 Error getting mfn 2409c (pfn 55555555) from L1 entry 000000002409c023 for l1e_owner=0, pg_owner=0
(XEN) mm.c:907:d0 Error getting mfn 2409d (pfn 55555555) from L1 entry 000000002409d023 for l1e_owner=0, pg_owner=0
(XEN) mm.c:907:d0 Error getting mfn 2409e (pfn 55555555) from L1 entry 000000002409e023 for l1e_owner=0, pg_owner=0
(XEN) mm.c:907:d0 Error getting mfn 2409f (pfn 55555555) from L1 entry 000000002409f023 for l1e_owner=0, pg_owner=0
[-- Attachment #4: xl-dmesg-iommu --]
[-- Type: text/plain, Size: 6273 bytes --]
__ __ _ _ _ ____
\ \/ /___ _ __ | || | / | |___ \
\ // _ \ '_ \ | || |_ | | __) |
/ \ __/ | | | |__ _|| |_ / __/
/_/\_\___|_| |_| |_|(_)_(_)_____|
(XEN) Xen version 4.1.2 (@[unknown]) (gcc version 4.4.3 (GCC) ) Thu Dec 8 10:35:43 GMT 2011
(XEN) Latest ChangeSet: unavailable
(XEN) Bootloader: GNU GRUB 0.97
(XEN) Command line: dom0_mem=800M sched=credit iommu=1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009c000 (usable)
(XEN) 000000000009c000 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cb40c000 (usable)
(XEN) 00000000cb40c000 - 00000000cb44f000 (ACPI NVS)
(XEN) 00000000cb44f000 - 00000000cb4dd000 (reserved)
(XEN) 00000000cb4dd000 - 00000000cb4f1000 (ACPI NVS)
(XEN) 00000000cb4f1000 - 00000000cb4f3000 (usable)
(XEN) 00000000cb4f3000 - 00000000cb5f9000 (reserved)
(XEN) 00000000cb5f9000 - 00000000cb5fa000 (usable)
(XEN) 00000000cb5fa000 - 00000000cb5ff000 (reserved)
(XEN) 00000000cb5ff000 - 00000000cb600000 (ACPI NVS)
(XEN) 00000000cb600000 - 00000000cb608000 (ACPI data)
(XEN) 00000000cb608000 - 00000000cb609000 (ACPI NVS)
(XEN) 00000000cb609000 - 00000000cb60b000 (ACPI data)
(XEN) 00000000cb60b000 - 00000000cb624000 (ACPI NVS)
(XEN) 00000000cb624000 - 00000000cb645000 (reserved)
(XEN) 00000000cb645000 - 00000000cb688000 (ACPI NVS)
(XEN) 00000000cb688000 - 00000000cb800000 (usable)
(XEN) 00000000cdc00000 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000e4000000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed40000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 00000001fc000000 (usable)
(XEN) 00000001fc000000 - 0000000200000000 (reserved)
(XEN) 0000000200000000 - 000000022c000000 (usable)
(XEN) System RAM: 7989MB (8180876kB)
(XEN) ACPI: RSDP 000F0410, 0024 (r2 INTEL)
(XEN) ACPI: XSDT CB609E18, 005C (r1 INTEL DQ57TM 1072009 MSFT 10013)
(XEN) ACPI: FACP CB607D98, 00F4 (r4 INTEL DQ57TM 1072009 MSFT 10013)
(XEN) ACPI: DSDT CB600018, 6CEA (r1 INTEL DQ57TM 0 INTL 20051117)
(XEN) ACPI: FACS CB608E40, 0040
(XEN) ACPI: APIC CB607F18, 00CC (r2 INTEL DQ57TM 1072009 MSFT 10013)
(XEN) ACPI: SSDT CB607C18, 014E (r1 INTEL DQ57TM 1 MSFT 3000001)
(XEN) ACPI: MCFG CB60AF18, 003C (r1 INTEL DQ57TM 1072009 MSFT 97)
(XEN) ACPI: ASF! CB609C18, 00A0 (r32 INTEL DQ57TM 1 TFSM F4240)
(XEN) ACPI: TCPA CB60AE98, 0032 (r2 INTEL DQ57TM 1 MSFT 1000013)
(XEN) ACPI: DMAR CB609B18, 00B8 (r1 INTEL DQ57TM 1 INTL 1)
(XEN) Xen heap: 9MB (9784kB)
(XEN) Domain heap initialised
(XEN) ACPI: 32/64X FACS address mismatch in FADT - cb608f40/00000000cb608e40, using 32
(XEN) Processor #0 6:5 APIC version 21
(XEN) Processor #1 6:5 APIC version 21
(XEN) Processor #4 6:5 APIC version 21
(XEN) Processor #5 6:5 APIC version 21
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Table is not found!
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3192.100 MHz processor.
(XEN) Intel VT-d Snoop Control not enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation not enabled.
(XEN) Intel VT-d Interrupt Remapping not enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) Platform timer is 3.579MHz ACPI PM Timer
(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) EPT supports 2MB super page.
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Brought up 4 CPUs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 32-bit, PAE, lsb
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x1000000 -> 0x1b76000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000224000000->0000000226000000 (194067 pages to be allocated)
(XEN) Init. ramdisk: 000000022b613000->000000022bfffb85
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c1000000->c1b76000
(XEN) Init. ramdisk: c1b76000->c2562b85
(XEN) Phys-Mach map: c2563000->c262b000
(XEN) Start info: c262b000->c262b47c
(XEN) Page tables: c262c000->c2645000
(XEN) Boot stack: c2645000->c2646000
(XEN) TOTAL: c0000000->c2800000
(XEN) ENTRY ADDRESS: c1779000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) [VT-D]iommu.c:853: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:856: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:831: DMAR:[DMA Write] Request device [00:02.0] fault addr 400000000, iommu reg = fff16000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) Scrubbing Free RAM: .......................................................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 176kB init memory.
(XEN) mm.c:907:d0 Error getting mfn 2409c (pfn 55555555) from L1 entry 000000002409c023 for l1e_owner=0, pg_owner=0
(XEN) mm.c:907:d0 Error getting mfn 2409d (pfn 55555555) from L1 entry 000000002409d023 for l1e_owner=0, pg_owner=0
(XEN) mm.c:907:d0 Error getting mfn 2409e (pfn 55555555) from L1 entry 000000002409e023 for l1e_owner=0, pg_owner=0
(XEN) mm.c:907:d0 Error getting mfn 2409f (pfn 55555555) from L1 entry 000000002409f023 for l1e_owner=0, pg_owner=0
[-- Attachment #5: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
next prev parent reply other threads:[~2011-12-19 15:32 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-08 12:00 VGA Passthrough crashes machine Anthony Wright
2011-12-14 21:38 ` Konrad Rzeszutek Wilk
2011-12-15 15:54 ` Anthony Wright
2011-12-15 21:12 ` Konrad Rzeszutek Wilk
2011-12-19 15:32 ` Anthony Wright [this message]
2012-01-03 15:04 ` Konrad Rzeszutek Wilk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EEF5923.1050307@overnetdata.com \
--to=anthony@overnetdata.com \
--cc=konrad@darnok.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).