* Re: [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2
[not found] ` <4EF0B034.1090708@gmx.de>
@ 2011-12-21 23:49 ` Florian Manschwetus
2011-12-22 9:32 ` Jan Beulich
2011-12-22 12:54 ` Igor Mammedov
0 siblings, 2 replies; 9+ messages in thread
From: Florian Manschwetus @ 2011-12-21 23:49 UTC (permalink / raw)
To: xen-devel@lists.xensource.com; +Cc: xen-users
[-- Attachment #1.1: Type: text/plain, Size: 8990 bytes --]
Sending to devel, maybe a BUG?
Here are the details to the used mobo:
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: 1004
Release Date: 03/26/2008
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Targeted content distribution is supported
BIOS Revision: 8.12
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: ASUSTeK Computer INC.
Product Name: M2N-MX
Version: Rev 1.xx
Serial Number: MB-xxxxxxxxxx
Asset Tag: To Be Filled By O.E.M.
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To Be Filled By O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Am 20.12.2011 16:56, schrieb Florian Manschwetus:
> Ok, I setup a serial so I can, give you a full copy of output (also
> added some debug options I found)
>
> Booting a command list
>
> Loading Xen 4.1.2 ...
> Loading Linux x86_64-3.1.5-gentoo ...
> Loading initial ramdisk ...
> __ __ _ _ _ ____
> \ \/ /___ _ __ | || | / | |___ \
> \ // _ \ '_ \ | || |_ | | __) |
> / \ __/ | | | |__ _|| |_ / __/
> /_/\_\___|_| |_| |_|(_)_(_)_____|
>
> (XEN) Xen version 4.1.2 (@) (gcc-Version 4.6.2 (Gentoo 4.6.2 p1.0,
> pie-0.4.5) ) Thu Dec 15 17:51:19 CET 2011
> (XEN) Latest ChangeSet: unavailable
> (XEN) Console output is synchronous.
> (XEN) Bootloader: GRUB 1.99
> (XEN) Command line: placeholder sync_console console_to_ring
> com1=115200,8n1 console=com1,vga loglvl=all lapic=debug
> apic_verbosity=debug apic=debug
> (XEN) Video information:
> (XEN) VGA is text mode 80x25, font 8x16
> (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
> (XEN) EDID info not retrieved because no DDC retrieval method detected
> (XEN) Disc information:
> (XEN) Found 1 MBR signatures
> (XEN) Found 1 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN) 0000000000000000 - 000000000009fc00 (usable)
> (XEN) 000000000009fc00 - 00000000000a0000 (reserved)
> (XEN) 00000000000e0000 - 0000000000100000 (reserved)
> (XEN) 0000000000100000 - 00000000bffc0000 (usable)
> (XEN) 00000000bffc0000 - 00000000bffce000 (ACPI data)
> (XEN) 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
> (XEN) 00000000bfff0000 - 00000000c0000000 (reserved)
> (XEN) 00000000fec00000 - 00000000fec01000 (reserved)
> (XEN) 00000000fee00000 - 00000000fef00000 (reserved)
> (XEN) 00000000ff780000 - 0000000100000000 (reserved)
> (XEN) 0000000100000000 - 0000000140000000 (usable)
> (XEN) ACPI: RSDP 000FB840, 0024 (r2 ACPIAM)
> (XEN) ACPI: XSDT BFFC0100, 004C (r1 A_M_I_ OEMXSDT 3000826 MSFT 97)
> (XEN) ACPI: FACP BFFC0290, 00F4 (r3 A_M_I_ OEMFACP 3000826 MSFT 97)
> (XEN) ACPI: DSDT BFFC05C0, 4E38 (r1 A0557 A0557000 0 INTL 20051117)
> (XEN) ACPI: FACS BFFCE000, 0040
> (XEN) ACPI: APIC BFFC0390, 0070 (r1 A_M_I_ OEMAPIC 3000826 MSFT 97)
> (XEN) ACPI: MCFG BFFC0400, 003C (r1 A_M_I_ OEMMCFG 3000826 MSFT 97)
> (XEN) ACPI: OEMB BFFCE040, 0060 (r1 A_M_I_ AMI_OEM 3000826 MSFT 97)
> (XEN) ACPI: HPET BFFC5400, 0038 (r1 A_M_I_ OEMHPET0 3000826 MSFT 97)
> (XEN) System RAM: 4095MB (4193660kB)
> (XEN) No NUMA configuration found
> (XEN) Faking a node at 0000000000000000-0000000140000000
> (XEN) Domain heap initialised
> (XEN) found SMP MP-table at 000ff780
> (XEN) DMI present.
> (XEN) APIC boot state is 'xapic'
> (XEN) Using APIC driver default
> (XEN) ACPI: PM-Timer IO Port: 0x508
> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[504,0], pm1x_evt[500,0]
> (XEN) ACPI: wakeup_vec[bffce00c], vec_size[20]
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> (XEN) Processor #0 15:3 APIC version 16
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> (XEN) Processor #1 15:3 APIC version 16
> (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> (XEN) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ9 used by override.
> (XEN) ACPI: IRQ14 used by override.
> (XEN) ACPI: IRQ15 used by override.
> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
> (XEN) ACPI: HPET id: 0x10de8201 base: 0xfed00000
> (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
> (XEN) PCI: Not using MMCONFIG.
> (XEN) Table is not found!
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) mapped APIC to ffff82c3ffffe000 (fee00000)
> (XEN) mapped IOAPIC to ffff82c3ffffd000 (fec00000)
> (XEN) IRQ limits: 24 GSI, 376 MSI/MSI-X
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Detected 2611.867 MHz processor.
> (XEN) Initing memory sharing.
> (XEN) AMD K8 machine check reporting enabled
> (XEN) AMD-Vi: IOMMU not found!
> (XEN) I/O virtualisation disabled
> (XEN) Getting VERSION: 80050010
> (XEN) Getting VERSION: 80050010
> (XEN) Getting ID: 0
> (XEN) Getting LVT0: 700
> (XEN) Getting LVT1: 400
> (XEN) enabled ExtINT on CPU#0
> (XEN) ESR value before enabling vector: 0x00000004 after: 0x00000000
> (XEN) ENABLING IO-APIC IRQs
> (XEN) -> Using new ACK method
> (XEN) init IO_APIC IRQs
> (XEN) IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22,
> 2-23 not connected.
> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=0 apic2=-1 pin2=-1
> (XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> (XEN) ...trying to set up timer (IRQ0) through the 8259A ... failed.
> (XEN) ...trying to set up timer as Virtual Wire IRQ... failed.
> (XEN) ...trying to set up timer as ExtINT IRQ... failed :(.
> (XEN)
> (XEN) ****************************************
> (XEN) Panic on CPU 0:
> (XEN) IO-APIC + timer doesn't work! Boot with apic_verbosity=debug and
> send a report. Then try booting with the 'noapic'
> option****************************************
> (XEN)
> (XEN) Reboot in five seconds...
>
>
>
> Am 20.12.2011 12:01, schrieb Florian Manschwetus:
>> Adding apic_verbosity=debug gives me that (hope nothing miss-typed as I
>> have no serial console on this box). I found a lot of suggested
>> workarounds:
>> - noapic as suggested in output gives an noapic isn't support
>> - acpi_skip_timer_override has no effect at all
>>
>> Thx,
>> Florian
>>
>> (XEN) Initing memory sharing.
>> (XEN) AMD-Vi: IOMMU not found!
>> (XEN) I/O virtualisation disabled
>> (XEN) Getting VERSION: 8005010
>> (XEN) Getting VERSION: 8005010
>> (XEN) Getting ID: 0
>> (XEN) Getting LVT0: 700
>> (XEN) Getting LVT1: 400
>> (XEN) enabled ExtINT on CPU#0
>> (XEN) ESR value before enabling vector: 0x00000004 after: 0x0000000
>> (XEN) ENABLING IO-APIC IRQs
>> (XEN) -> Using new ACK method
>> (XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
>> (XEN)
>> (XEN) *****************************************************
>> (XEN) Panic on CPU 0:
>> (XEN) IO-APIC + timer doesn't work! Boot with apic_verbosity=debug and
>> send a report. Then try booting with hte 'noapic'
>> option****************************
>>
>>
>>
>> _______________________________________________
>> Xen-users mailing list
>> Xen-users@lists.xensource.com
>> http://lists.xensource.com/xen-users
>
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users
[-- Attachment #1.2: S/MIME Kryptografische Unterschrift --]
[-- Type: application/pkcs7-signature, Size: 2332 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2
2011-12-21 23:49 ` [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2 Florian Manschwetus
@ 2011-12-22 9:32 ` Jan Beulich
2011-12-22 9:49 ` Florian Manschwetus
[not found] ` <4EF2FCED.8010402@gmx.de>
2011-12-22 12:54 ` Igor Mammedov
1 sibling, 2 replies; 9+ messages in thread
From: Jan Beulich @ 2011-12-22 9:32 UTC (permalink / raw)
To: Florian Manschwetus; +Cc: xen-devel@lists.xensource.com
>>> On 22.12.11 at 00:49, Florian Manschwetus <florianmanschwetus@gmx.de> wrote:
> Sending to devel, maybe a BUG?
Unlikely, perhaps rather the lack of a necessary command line option
("acpi_skip_timer_override"). If you don't need this option when booting
Linux on that system, you can verify this by looking at whether the
native kernel logs a respective message and/or one saying
"BIOS IRQ0 pin2 override ignored".
Jan
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2
2011-12-22 9:32 ` Jan Beulich
@ 2011-12-22 9:49 ` Florian Manschwetus
[not found] ` <4EF2FCED.8010402@gmx.de>
1 sibling, 0 replies; 9+ messages in thread
From: Florian Manschwetus @ 2011-12-22 9:49 UTC (permalink / raw)
To: xen-devel
[-- Attachment #1.1.1: Type: text/plain, Size: 817 bytes --]
Am 22.12.2011 10:32, schrieb Jan Beulich:
>>>> On 22.12.11 at 00:49, Florian Manschwetus<florianmanschwetus@gmx.de> wrote:
>> Sending to devel, maybe a BUG?
>
> Unlikely, perhaps rather the lack of a necessary command line option
> ("acpi_skip_timer_override"). If you don't need this option when booting
> Linux on that system, you can verify this by looking at whether the
> native kernel logs a respective message and/or one saying
> "BIOS IRQ0 pin2 override ignored".
>
> Jan
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
Ok, I think I got the output. But I see nothing really helpful in there.
I have attached the boot-log, maybe it gives you the needed information.
Thx,
Florian
[-- Attachment #1.1.2: kernel-boot --]
[-- Type: text/plain, Size: 31309 bytes --]
Loading Linux x86_64-3.1.5-gentoo ...
Loading initial ramdisk ...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.5-gentoo (root@turing.algo.informatik.tu-darmstadt.de) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #2 SMP Tue Dec 20 16:08:28 CET 2011
[ 0.000000] Command line: BOOT_IMAGE=/kernel-genkernel-x86_64-3.1.5-gentoo ro init=/linuxrc splash=silent,theme:sabayon vga=791 console=tty1 domdadm resume=swap:/dev/mapper/vg_turing-lv_swap real_resume=/dev/mapper/vg_turing-lv_swap dolvm root=/dev/mapper/vg_turing-lv_root docrypt console=ttyS0,115200n8
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
[ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbffc0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bffc0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] RAMDISK: 36b68000 - 375ac000
[ 0.000000] ACPI: RSDP 00000000000fb840 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bffc0100 0004C (v01 A_M_I_ OEMXSDT 03000826 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bffc0290 000F4 (v03 A_M_I_ OEMFACP 03000826 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bffc05c0 04E38 (v01 A0557 A0557000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bffce000 00040
[ 0.000000] ACPI: APIC 00000000bffc0390 00070 (v01 A_M_I_ OEMAPIC 03000826 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bffc0400 0003C (v01 A_M_I_ OEMMCFG 03000826 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bffce040 00060 (v01 A_M_I_ AMI_OEM 03000826 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bffc5400 00038 (v01 A_M_I_ OEMHPET0 03000826 MSFT 00000097)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bffc0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bffc0000 - 00000000bffce000
[ 0.000000] PM: Registered nosave memory: 00000000bffce000 - 00000000bfff0000
[ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff780000
[ 0.000000] PM: Registered nosave memory: 00000000ff780000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88013fc00000 s74688 r8192 d23616 u1048576
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027914
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-3.1.5-gentoo ro init=/linuxrc splash=silent,theme:sabayon vga=791 console=tty1 domdadm resume=swap:/dev/mapper/vg_turing-lv_swap real_resume=/dev/mapper/vg_turing-lv_swap dolvm root=/dev/mapper/vg_turing-lv_root docrypt console=ttyS0,115200n8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ b4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
[ 0.000000] Memory: 3972508k/5242880k available (7229k kernel code, 1049284k absent, 221088k reserved, 4408k data, 748k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty1] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2611.707 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.003999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5223.41 BogoMIPS (lpj=2611707)
[ 0.005002] pid_max: default: 32768 minimum: 301
[ 0.006028] Security Framework initialized
[ 0.007005] AppArmor: AppArmor disabled by boot time parameter
[ 0.008406] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010954] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012068] Mount-cache hash table entries: 256
[ 0.013148] Initializing cgroup subsys debug
[ 0.014003] Initializing cgroup subsys memory
[ 0.015011] Initializing cgroup subsys devices
[ 0.016002] Initializing cgroup subsys freezer
[ 0.017002] Initializing cgroup subsys blkio
[ 0.018009] Initializing cgroup subsys perf_event
[ 0.019039] CPU: Physical Processor ID: 0
[ 0.020001] CPU: Processor Core ID: 0
[ 0.021002] mce: CPU supports 5 MCE banks
[ 0.022009] using AMD E400 aware idle routine
[ 0.025543] ACPI: Core revision 20110623
[ 0.028998] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.029997] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.029997] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.029997] ..... (found apic 0 pin 0) ...
[ 0.040381] ....... works.
[ 0.040998] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 03
[ 0.044996] Performance Events: AMD PMU driver.
[ 0.045999] ... version: 0
[ 0.046997] ... bit width: 48
[ 0.047997] ... generic registers: 4
[ 0.048997] ... value mask: 0000ffffffffffff
[ 0.049997] ... max period: 00007fffffffffff
[ 0.050997] ... fixed-purpose events: 0
[ 0.051997] ... event mask: 000000000000000f
[ 0.053077] MCE: In-kernel MCE decoding enabled.
[ 0.054069] Booting Node 0, Processors #1 Ok.
[ 0.127031] Brought up 2 CPUs
[ 0.127990] Total of 2 processors activated (10446.80 BogoMIPS).
[ 0.129469] devtmpfs: initialized
[ 0.131709] PM: Registering ACPI NVS region at bffce000 (139264 bytes)
[ 0.138025] xor: automatically using best checksumming function: generic_sse
[ 0.149948] generic_sse: 8052.000 MB/sec
[ 0.153986] xor: using function: generic_sse (8052.000 MB/sec)
[ 0.160052] print_constraints: dummy:
[ 0.164032] NET: Registered protocol family 16
[ 0.168989] TOM: 00000000c0000000 aka 3072M
[ 0.173005] TOM2: 0000000140000000 aka 5120M
[ 0.177004] ACPI: bus type pci registered
[ 0.181020] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.191002] PCI: not using MMCONFIG
[ 0.193981] PCI: Using configuration type 1 for base access
[ 0.217136] bio: create slab <bio-0> at 0
[ 0.234953] raid6: int64x1 2171 MB/s
[ 0.254954] raid6: int64x2 2777 MB/s
[ 0.274953] raid6: int64x4 2027 MB/s
[ 0.294948] raid6: int64x8 1468 MB/s
[ 0.314925] raid6: sse2x1 3664 MB/s
[ 0.334930] raid6: sse2x2 4839 MB/s
[ 0.354929] raid6: sse2x4 5023 MB/s
[ 0.357956] raid6: using algorithm sse2x4 (5023 MB/s)
[ 0.362983] ACPI: Added _OSI(Module Device)
[ 0.368075] ACPI: Added _OSI(Processor Device)
[ 0.371985] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.376973] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.385172] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.393578] ACPI: Interpreter enabled
[ 0.396952] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.401514] ACPI: Using IOAPIC for interrupt routing
[ 0.405967] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.416987] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.456060] ACPI: No dock devices found.
[ 0.459963] HEST: Table not found.
[ 0.463963] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.472998] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.479039] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.485965] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.491949] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.499935] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.506934] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xff77ffff]
[ 0.515776] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.524938] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.529958] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[ 0.534948] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[ 0.540180] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.545929] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.554926] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.565157] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.573178] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.580180] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.587174] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.594983] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.602174] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 0.609172] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.616169] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11
[ 0.623172] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
[ 0.629534] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[ 0.635978] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[ 0.642165] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 0.648641] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 0.655974] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 0.663164] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.669636] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.676971] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[ 0.683161] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
[ 0.689555] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.696931] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.704909] vgaarb: loaded
[ 0.707902] vgaarb: bridge control possible 0000:02:00.0
[ 0.712968] SCSI subsystem initialized
[ 0.716940] usbcore: registered new interface driver usbfs
[ 0.717932] usbcore: registered new interface driver hub
[ 0.718915] usbcore: registered new device driver usb
[ 0.724943] wmi: Mapper loaded
[ 0.725931] PCI: Using ACPI for IRQ routing
[ 0.733376] NetLabel: Initializing
[ 0.733899] NetLabel: domain hash size = 128
[ 0.734898] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.735908] NetLabel: unlabeled traffic allowed by default
[ 0.736926] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.737912] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.740087] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.743925] Switching to clocksource hpet
[ 0.745795] Switched to NOHz mode on CPU #0
[ 0.745831] Switched to NOHz mode on CPU #1
[ 0.758811] pnp: PnP ACPI init
[ 0.761880] ACPI: bus type pnp registered
[ 0.768493] pnp 00:07: disabling [io 0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
[ 0.778577] pnp 00:07: disabling [io 0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
[ 0.789016] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.794937] system 00:07: [io 0x0800-0x080f] has been reserved
[ 0.800888] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.806809] system 00:07: [io 0x0580-0x05ff] has been reserved
[ 0.812747] system 00:07: [io 0x0800-0x087f] could not be reserved
[ 0.819020] system 00:07: [io 0x0880-0x08ff] has been reserved
[ 0.824940] system 00:07: [io 0x0d00-0x0d7f] has been reserved
[ 0.830857] system 00:07: [io 0x0d80-0x0dff] has been reserved
[ 0.836778] system 00:07: [io 0x2000-0x207f] has been reserved
[ 0.842697] system 00:07: [io 0x2080-0x20ff] has been reserved
[ 0.848685] system 00:07: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.855906] system 00:07: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.863124] system 00:07: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.870344] system 00:07: [mem 0xfefe0000-0xfefe01ff] has been reserved
[ 0.876955] system 00:07: [mem 0xfefe1000-0xfefe1fff] has been reserved
[ 0.883568] system 00:07: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.890182] system 00:07: [mem 0xffb80000-0xffffffff] has been reserved
[ 0.896794] system 00:07: [mem 0xff300000-0xff3fffff] has been reserved
[ 0.903682] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.910783] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.917734] system 00:0b: [io 0x0230-0x023f] has been reserved
[ 0.923659] system 00:0b: [io 0x0290-0x029f] has been reserved
[ 0.929579] system 00:0b: [io 0x0a00-0x0a0f] has been reserved
[ 0.935502] system 00:0b: [io 0x0a10-0x0a1f] has been reserved
[ 0.942144] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.948997] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.955963] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.962935] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.969897] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.976945] system 00:0e: [mem 0xff780000-0xffffffff] could not be reserved
[ 0.984185] pnp: PnP ACPI: found 15 devices
[ 0.988375] ACPI: ACPI bus type pnp unregistered
[ 0.998454] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 1.003693] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 1.008923] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
[ 1.015019] pci 0000:00:09.0: bridge window [mem 0xdc000000-0xdfffffff]
[ 1.021809] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.029568] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[ 1.034795] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[ 1.040256] NET: Registered protocol family 2
[ 1.044747] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.053461] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.064520] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.071748] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.078363] TCP reno registered
[ 1.081523] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.087577] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.094139] NET: Registered protocol family 1
[ 1.673093] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.678626] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.684170] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.689708] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.695245] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.700786] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.706335] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.711885] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.717442] Trying to unpack rootfs image as initramfs...
[ 1.871811] Freeing initrd memory: 10512k freed
[ 1.883027] PCI-DMA: Disabling AGP.
[ 1.886613] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 1.892188] PCI-DMA: using GART IOMMU.
[ 1.895940] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.907445] audit: initializing netlink socket (disabled)
[ 1.912903] type=2000 audit(1324547036.911:1): initialized
[ 1.933398] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.973772] VFS: Disk quotas dquot_6.5.2
[ 1.977939] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.984492] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.990915] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 1.995336] QNX4 filesystem 0.2.3 registered.
[ 2.000588] Btrfs loaded
[ 2.003134] msgmni has been set to 7908
[ 2.007397] async_tx: api initialized (async)
[ 2.011915] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.019349] io scheduler noop registered
[ 2.023282] io scheduler deadline registered
[ 2.027664] io scheduler cfq registered (default)
[ 2.033318] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
�[ 2.304133] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.387672] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.402444] Linux agpgart interface v0.103
[ 2.406692] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[ 2.412787] vesafb: scrolling: redraw
[ 2.416459] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 2.422191] vesafb: framebuffer at 0xdd000000, mapped to 0xffffc90011100000, using 1536k, total 1536k
[ 2.435631] Console: switching to colour frame buffer device 128x48
[ 2.446153] fb0: VESA VGA frame buffer device
[ 2.456177] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 2.464421] ACPI: Power Button [PWRB]
[ 2.468194] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.475654] ACPI: Power Button [PWRF]
[ 2.482017] ERST: Table is not found!
[ 2.485730] GHES: HEST is not enabled!
[ 2.489638] XENFS: not registering filesystem on non-xen platform
[ 2.498035] brd: module loaded
[ 2.502340] loop: module loaded
[ 2.505544] Compaq SMART2 Driver (v 2.6.0)
[ 2.509779] HP CISS Driver (v 3.6.26)
[ 2.513888] MM: desc_per_page = 128
[ 2.517673] Loading iSCSI transport class v2.0-870.
[ 2.522596] fbcondecor: console 0 using theme 'sabayon'
[ 2.530014] fnic: Cisco FCoE HBA Driver, ver 1.5.0.2
[ 2.535365] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[ 2.541023] Detecting Adaptec I2O RAID controllers...
[ 2.546340] Adaptec aacraid driver 1.1-7[28000]-ms
[ 2.562908] fbcondecor: switched decor state to 'on' on console 0
[ 2.570582] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 2.579043] isci: Intel(R) C600 SAS Controller Driver - version 1.0.0
[ 2.587223] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.07-k.
[ 2.597680] iscsi: registered transport (qla4xxx)
[ 2.603962] QLogic iSCSI HBA Driver
[ 2.608909] Emulex LightPulse Fibre Channel SCSI driver 8.3.25
[ 2.616212] Copyright(c) 2004-2009 Emulex. All rights reserved.
[ 2.623989] DC390: clustering now enabled by default. If you get problems load
[ 2.632758] with "disable_clustering=1" and report to maintainers
[ 2.641154] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 2.650120] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 2.658711] megasas: 00.00.05.40-rc1 Tue. Jul. 26 17:00:00 PDT 2011
[ 2.666605] mpt2sas version 09.100.00.00 loaded
[ 2.672894] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 2.680711] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 2.689234] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 2.698184] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[ 2.707598] ipr: IBM Power RAID SCSI Device Driver version: 2.5.2 (April 27, 2011)
[ 2.716823] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[ 2.724488] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[ 2.732296] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[ 2.741616] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
[ 2.750128] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
[ 2.757506] iscsi: registered transport (cxgb3i)
[ 2.763694] Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
[ 2.771091] iscsi: registered transport (cxgb4i)
[ 2.777285] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.0.3 (Jun 15, 2011)
[ 2.785995] iscsi: registered transport (bnx2i)
[ 2.792203] VMware PVSCSI driver - version 1.0.1.0-k
[ 2.798865] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 2.806874] osst :I: Tape driver with OnStream support version 0.99.4
[ 2.806875] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 2.824383] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 2.831832] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 2.842347] scsi0 : sata_nv
[ 2.847012] scsi1 : sata_nv
[ 2.851689] ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 23
[ 2.860511] ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 23
[ 2.869498] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[ 2.876971] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[ 2.887543] scsi2 : sata_nv
[ 2.892239] scsi3 : sata_nv
[ 2.896962] ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 22
[ 2.905848] ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 22
[ 2.915861] scsi4 : pata_amd
[ 2.920573] scsi5 : pata_amd
[ 2.925602] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 2.934247] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 2.945422] Fixed MDIO Bus: probed
[ 2.950710] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011)
[ 2.959857] I2O subsystem v1.325
[ 2.964718] i2o: max drivers = 8
[ 2.969762] I2O Configuration OSM v1.323
[ 2.975429] I2O Bus Adapter OSM v1.317
[ 2.980809] I2O Block Device OSM v1.325
[ 2.986398] I2O SCSI Peripheral OSM v1.316
[ 2.992074] I2O ProcFS OSM v1.316
[ 2.996939] Fusion MPT base driver 3.04.19
[ 3.002520] Copyright (c) 1999-2008 LSI Corporation
[ 3.008861] Fusion MPT SPI Host driver 3.04.19
[ 3.014833] Fusion MPT FC Host driver 3.04.19
[ 3.020702] Fusion MPT SAS Host driver 3.04.19
[ 3.026628] Fusion MPT misc device (ioctl) driver 3.04.19
[ 3.033523] mptctl: Registered with Fusion MPT base driver
[ 3.040400] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 3.046911] Fusion MPT LAN driver 3.04.19
[ 3.052496] Initializing USB Mass Storage driver...
[ 3.058819] usbcore: registered new interface driver usb-storage
[ 3.066186] USB Mass Storage support registered.
[ 3.072219] usbcore: registered new interface driver libusual
[ 3.079398] usbcore: registered new interface driver ums-alauda
[ 3.086717] usbcore: registered new interface driver ums-cypress
[ 3.105090] usbcore: registered new interface driver ums-datafab
[ 3.112462] usbcore: registered new interface driver ums-freecom
[ 3.119789] usbcore: registered new interface driver ums-isd200
[ 3.126992] usbcore: registered new interface driver ums-jumpshot
[ 3.134331] usbcore: registered new interface driver ums-karma
[ 3.141421] usbcore: registered new interface driver ums-onetouch
[ 3.148730] usbcore: registered new interface driver ums-sddr09
[ 3.155860] usbcore: registered new interface driver ums-sddr55
[ 3.162946] usbcore: registered new interface driver ums-usbat
[ 3.169973] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 3.177831] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.189426] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.195871] mousedev: PS/2 mouse device common for all mice
[ 3.203218] rtc_cmos 00:02: RTC can wake from S4
[ 3.209200] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.216538] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 3.224468] md: linear personality registered for level -1
[ 3.231145] md: raid0 personality registered for level 0
[ 3.237631] md: raid1 personality registered for level 1
[ 3.244079] md: raid10 personality registered for level 10
[ 3.250682] md: raid6 personality registered for level 6
[ 3.250758] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 3.266905] md: raid5 personality registered for level 5
[ 3.273415] md: raid4 personality registered for level 4
[ 3.279915] md: multipath personality registered for level -4
[ 3.286863] md: faulty personality registered for level -5
[ 3.293858] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[ 3.303861] cpuidle: using governor ladder
[ 3.309246] cpuidle: using governor menu
[ 3.314563] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 3.324981] usbcore: registered new interface driver usbhid
[ 3.328052] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.339381] usbhid: USB HID core driver
[ 3.344747] TCP bic registered
[ 3.349158] NET: Registered protocol family 17
[ 3.355056] Registering the dns_resolver key type
[ 3.373036] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.380554] ata1.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
[ 3.383170] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB00, max UDMA/100
[ 3.389164] ata3.00: configured for UDMA/100
[ 3.401097] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.448321] ata1.00: configured for UDMA/133
[ 3.454155] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 3.464039] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.473052] sd 0:0:0:0: [sda] Write Protect is off
[ 3.479363] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.479366] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.513012] sda: sda1 sda2
[ 3.517835] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.950053] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.014122] ata2.00: ATAPI: TSSTcorpDVD-ROM SH-D163B, SB00, max UDMA/33
[ 4.066114] ata2.00: configured for UDMA/33
[ 4.073557] scsi 1:0:0:0: CD-ROM TSSTcorp DVD-ROM SH-D163B SB00 PQ: 0 ANSI: 5
[ 4.085485] sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
[ 4.093176] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.100400] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.108241] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB00 PQ: 0 ANSI: 5
[ 4.120617] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.130111] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 4.450307] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.457449] registered taskstats version 1
[ 4.478066] rtc_cmos 00:02: setting system clock to 2011-12-22 09:44:00 UTC (1324547040)
[ 4.487864] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2 cpu cores) (version 2.20.00)
[ 4.499680] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 4.499682] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 4.517194] Freeing unused kernel memory: 748k freed
[-- Attachment #1.2: S/MIME Kryptografische Unterschrift --]
[-- Type: application/pkcs7-signature, Size: 2332 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2
[not found] ` <4EF2FCED.8010402@gmx.de>
@ 2011-12-22 12:28 ` Jan Beulich
2011-12-22 13:11 ` Florian Manschwetus
0 siblings, 1 reply; 9+ messages in thread
From: Jan Beulich @ 2011-12-22 12:28 UTC (permalink / raw)
To: Florian Manschwetus; +Cc: xen-devel@lists.xensource.com
>>> On 22.12.11 at 10:48, Florian Manschwetus <florianmanschwetus@gmx.de> wrote:
> Ok, I think I got the output. But I see nothing really helpful in there.
> I have attached the boot-log, maybe it gives you the needed information.
[ 0.028998] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.029997] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.029997] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.029997] ..... (found apic 0 pin 0) ...
[ 0.040381] ....... works.
shows that the kernel has no pre-defined workaround (and you'd
likely be better of using the same command line option as I
recommended for Xen here too).
The question why what works on Linux doesn't work on Xen is not
very interesting unless the suggested command line option doesn't
help.
Jan
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2
2011-12-21 23:49 ` [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2 Florian Manschwetus
2011-12-22 9:32 ` Jan Beulich
@ 2011-12-22 12:54 ` Igor Mammedov
2011-12-22 13:16 ` Florian Manschwetus
1 sibling, 1 reply; 9+ messages in thread
From: Igor Mammedov @ 2011-12-22 12:54 UTC (permalink / raw)
To: xen-devel
On 12/22/2011 12:49 AM, Florian Manschwetus wrote:
>> (XEN) AMD-Vi: IOMMU not found!
>> (XEN) I/O virtualisation disabled
I've seen the same issue on a AMD system with upstream xen and
host booted after iommu=off was added to xen's cmd line..
Although log says that there isn't iommu, but it worth the shot.
--
Thanks,
Igor
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2
2011-12-22 12:28 ` Jan Beulich
@ 2011-12-22 13:11 ` Florian Manschwetus
2011-12-22 13:28 ` Jan Beulich
0 siblings, 1 reply; 9+ messages in thread
From: Florian Manschwetus @ 2011-12-22 13:11 UTC (permalink / raw)
To: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 6293 bytes --]
Looks acpi_skip_timer_override is not the solution:
Loading Xen 4.1.2 ...
Loading Linux x86_64-3.1.5-gentoo ...
Loading initial ramdisk ...
__ __ _ _ _ ____
\ \/ /___ _ __ | || | / | |___ \
\ // _ \ '_ \ | || |_ | | __) |
/ \ __/ | | | |__ _|| |_ / __/
/_/\_\___|_| |_| |_|(_)_(_)_____|
(XEN) Xen version 4.1.2 (@) (gcc-Version 4.6.2 (Gentoo 4.6.2 p1.0,
pie-0.4.5) ) Thu Dec 15 17:51:19 CET 2011
(XEN) Latest ChangeSet: unavailable
(XEN) Console output is synchronous.
(XEN) Bootloader: GRUB 1.99
(XEN) Command line: placeholder sync_console console_to_ring
com1=115200,8n1 console=com1,vga loglvl=all lapic=debug
apic_verbosity=debug apic=debug acpi_skip_timer_override
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 000000000009fc00 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bffc0000 (usable)
(XEN) 00000000bffc0000 - 00000000bffce000 (ACPI data)
(XEN) 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
(XEN) 00000000bfff0000 - 00000000c0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fee00000 - 00000000fef00000 (reserved)
(XEN) 00000000ff780000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000140000000 (usable)
(XEN) ACPI: RSDP 000FB840, 0024 (r2 ACPIAM)
(XEN) ACPI: XSDT BFFC0100, 004C (r1 A_M_I_ OEMXSDT 3000826 MSFT 97)
(XEN) ACPI: FACP BFFC0290, 00F4 (r3 A_M_I_ OEMFACP 3000826 MSFT 97)
(XEN) ACPI: DSDT BFFC05C0, 4E38 (r1 A0557 A0557000 0 INTL 20051117)
(XEN) ACPI: FACS BFFCE000, 0040
(XEN) ACPI: APIC BFFC0390, 0070 (r1 A_M_I_ OEMAPIC 3000826 MSFT 97)
(XEN) ACPI: MCFG BFFC0400, 003C (r1 A_M_I_ OEMMCFG 3000826 MSFT 97)
(XEN) ACPI: OEMB BFFCE040, 0060 (r1 A_M_I_ AMI_OEM 3000826 MSFT 97)
(XEN) ACPI: HPET BFFC5400, 0038 (r1 A_M_I_ OEMHPET0 3000826 MSFT 97)
(XEN) System RAM: 4095MB (4193660kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000140000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) APIC boot state is 'xapic'
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x508
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[504,0], pm1x_evt[500,0]
(XEN) ACPI: wakeup_vec[bffce00c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 15:3 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 15:3 APIC version 16
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) ACPI: IRQ14 used by override.
(XEN) ACPI: IRQ15 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x10de8201 base: 0xfed00000
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: Not using MMCONFIG.
(XEN) Table is not found!
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) mapped APIC to ffff82c3ffffe000 (fee00000)
(XEN) mapped IOAPIC to ffff82c3ffffd000 (fec00000)
(XEN) IRQ limits: 24 GSI, 376 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2611.923 MHz processor.
(XEN) Initing memory sharing.
(XEN) AMD K8 machine check reporting enabled
(XEN) AMD-Vi: IOMMU not found!
(XEN) I/O virtualisation disabled
(XEN) Getting VERSION: 80050010
(XEN) Getting VERSION: 80050010
(XEN) Getting ID: 0
(XEN) Getting LVT0: 700
(XEN) Getting LVT1: 400
(XEN) enabled ExtINT on CPU#0
(XEN) ESR value before enabling vector: 0x00000004 after: 0x00000000
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22,
2-23 not connected.
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=0 apic2=-1 pin2=-1
(XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
(XEN) ...trying to set up timer (IRQ0) through the 8259A ... failed.
(XEN) ...trying to set up timer as Virtual Wire IRQ... failed.
(XEN) ...trying to set up timer as ExtINT IRQ... failed :(.
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) IO-APIC + timer doesn't work! Boot with apic_verbosity=debug and
send a report. Then try booting with the 'noapic'
option****************************************
(XEN)
(XEN) Reboot in five seconds...
Am 22.12.2011 13:28, schrieb Jan Beulich:
>>>> On 22.12.11 at 10:48, Florian Manschwetus<florianmanschwetus@gmx.de> wrote:
>> Ok, I think I got the output. But I see nothing really helpful in there.
>> I have attached the boot-log, maybe it gives you the needed information.
>
> [ 0.028998] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
> [ 0.029997] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> [ 0.029997] ...trying to set up timer (IRQ0) through the 8259A ...
> [ 0.029997] ..... (found apic 0 pin 0) ...
> [ 0.040381] ....... works.
>
> shows that the kernel has no pre-defined workaround (and you'd
> likely be better of using the same command line option as I
> recommended for Xen here too).
>
> The question why what works on Linux doesn't work on Xen is not
> very interesting unless the suggested command line option doesn't
> help.
>
> Jan
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
[-- Attachment #1.2: S/MIME Kryptografische Unterschrift --]
[-- Type: application/pkcs7-signature, Size: 2332 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2
2011-12-22 12:54 ` Igor Mammedov
@ 2011-12-22 13:16 ` Florian Manschwetus
0 siblings, 0 replies; 9+ messages in thread
From: Florian Manschwetus @ 2011-12-22 13:16 UTC (permalink / raw)
To: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 5545 bytes --]
Am 22.12.2011 13:54, schrieb Igor Mammedov:
> On 12/22/2011 12:49 AM, Florian Manschwetus wrote:
>>> (XEN) AMD-Vi: IOMMU not found!
>>> (XEN) I/O virtualisation disabled
>
> I've seen the same issue on a AMD system with upstream xen and
> host booted after iommu=off was added to xen's cmd line..
> Although log says that there isn't iommu, but it worth the shot.
>
Same, here doesn't fix :(
Thx,
Florian
Loading Xen 4.1.2 ...
Loading Linux x86_64-3.1.5-gentoo ...
Loading initial ramdisk ...
__ __ _ _ _ ____
\ \/ /___ _ __ | || | / | |___ \
\ // _ \ '_ \ | || |_ | | __) |
/ \ __/ | | | |__ _|| |_ / __/
/_/\_\___|_| |_| |_|(_)_(_)_____|
(XEN) Xen version 4.1.2 (@) (gcc-Version 4.6.2 (Gentoo 4.6.2 p1.0,
pie-0.4.5) ) Thu Dec 15 17:51:19 CET 2011
(XEN) Latest ChangeSet: unavailable
(XEN) Console output is synchronous.
(XEN) Bootloader: GRUB 1.99
(XEN) Command line: placeholder sync_console console_to_ring
com1=115200,8n1 console=com1,vga loglvl=all lapic=debug
apic_verbosity=debug apic=debug iommu=off
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 000000000009fc00 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bffc0000 (usable)
(XEN) 00000000bffc0000 - 00000000bffce000 (ACPI data)
(XEN) 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
(XEN) 00000000bfff0000 - 00000000c0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fee00000 - 00000000fef00000 (reserved)
(XEN) 00000000ff780000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000140000000 (usable)
(XEN) ACPI: RSDP 000FB840, 0024 (r2 ACPIAM)
(XEN) ACPI: XSDT BFFC0100, 004C (r1 A_M_I_ OEMXSDT 3000826 MSFT 97)
(XEN) ACPI: FACP BFFC0290, 00F4 (r3 A_M_I_ OEMFACP 3000826 MSFT 97)
(XEN) ACPI: DSDT BFFC05C0, 4E38 (r1 A0557 A0557000 0 INTL 20051117)
(XEN) ACPI: FACS BFFCE000, 0040
(XEN) ACPI: APIC BFFC0390, 0070 (r1 A_M_I_ OEMAPIC 3000826 MSFT 97)
(XEN) ACPI: MCFG BFFC0400, 003C (r1 A_M_I_ OEMMCFG 3000826 MSFT 97)
(XEN) ACPI: OEMB BFFCE040, 0060 (r1 A_M_I_ AMI_OEM 3000826 MSFT 97)
(XEN) ACPI: HPET BFFC5400, 0038 (r1 A_M_I_ OEMHPET0 3000826 MSFT 97)
(XEN) System RAM: 4095MB (4193660kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000140000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) APIC boot state is 'xapic'
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x508
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[504,0], pm1x_evt[500,0]
(XEN) ACPI: wakeup_vec[bffce00c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 15:3 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 15:3 APIC version 16
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) ACPI: IRQ14 used by override.
(XEN) ACPI: IRQ15 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x10de8201 base: 0xfed00000
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: Not using MMCONFIG.
(XEN) Table is not found!
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) mapped APIC to ffff82c3ffffe000 (fee00000)
(XEN) mapped IOAPIC to ffff82c3ffffd000 (fec00000)
(XEN) IRQ limits: 24 GSI, 376 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2611.851 MHz processor.
(XEN) Initing memory sharing.
(XEN) AMD K8 machine check reporting enabled
(XEN) I/O virtualisation disabled
(XEN) Getting VERSION: 80050010
(XEN) Getting VERSION: 80050010
(XEN) Getting ID: 0
(XEN) Getting LVT0: 700
(XEN) Getting LVT1: 400
(XEN) enabled ExtINT on CPU#0
(XEN) ESR value before enabling vector: 0x00000004 after: 0x00000000
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22,
2-23 not connected.
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=0 apic2=-1 pin2=-1
(XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
(XEN) ...trying to set up timer (IRQ0) through the 8259A ... failed.
(XEN) ...trying to set up timer as Virtual Wire IRQ... failed.
(XEN) ...trying to set up timer as ExtINT IRQ... failed :(.
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) IO-APIC + timer doesn't work! Boot with apic_verbosity=debug and
send a report. Then try booting with the 'noapic'
option****************************************
(XEN)
(XEN) Reboot in five seconds...
[-- Attachment #1.2: S/MIME Kryptografische Unterschrift --]
[-- Type: application/pkcs7-signature, Size: 2332 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2
2011-12-22 13:11 ` Florian Manschwetus
@ 2011-12-22 13:28 ` Jan Beulich
2011-12-22 13:32 ` Florian Manschwetus
0 siblings, 1 reply; 9+ messages in thread
From: Jan Beulich @ 2011-12-22 13:28 UTC (permalink / raw)
To: Florian Manschwetus; +Cc: xen-devel
>>> On 22.12.11 at 14:11, Florian Manschwetus <florianmanschwetus@gmx.de> wrote:
> Looks acpi_skip_timer_override is not the solution:
That's unfortunate. Next thing for us to know is whether you have
been told any workaround on the native Linux side to make the
respective messages disappear (i.e. to consider porting over those
bits, if they exist).
If there's no solution known on native Linux, then some debugging
will need to be done with that system (a first guess would then be
that the system is actually reporting the wrong override
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
meaning to actually specify global_irq as 2, which would be pretty
strait forward to hack in for an experiment).
Jan
> Loading Xen 4.1.2 ...
> Loading Linux x86_64-3.1.5-gentoo ...
> Loading initial ramdisk ...
> __ __ _ _ _ ____
> \ \/ /___ _ __ | || | / | |___ \
> \ // _ \ '_ \ | || |_ | | __) |
> / \ __/ | | | |__ _|| |_ / __/
> /_/\_\___|_| |_| |_|(_)_(_)_____|
>
> (XEN) Xen version 4.1.2 (@) (gcc-Version 4.6.2 (Gentoo 4.6.2 p1.0,
> pie-0.4.5) ) Thu Dec 15 17:51:19 CET 2011
> (XEN) Latest ChangeSet: unavailable
> (XEN) Console output is synchronous.
> (XEN) Bootloader: GRUB 1.99
> (XEN) Command line: placeholder sync_console console_to_ring
> com1=115200,8n1 console=com1,vga loglvl=all lapic=debug
> apic_verbosity=debug apic=debug acpi_skip_timer_override
> (XEN) Video information:
> (XEN) VGA is text mode 80x25, font 8x16
> (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
> (XEN) EDID info not retrieved because no DDC retrieval method detected
> (XEN) Disc information:
> (XEN) Found 1 MBR signatures
> (XEN) Found 1 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN) 0000000000000000 - 000000000009fc00 (usable)
> (XEN) 000000000009fc00 - 00000000000a0000 (reserved)
> (XEN) 00000000000e0000 - 0000000000100000 (reserved)
> (XEN) 0000000000100000 - 00000000bffc0000 (usable)
> (XEN) 00000000bffc0000 - 00000000bffce000 (ACPI data)
> (XEN) 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
> (XEN) 00000000bfff0000 - 00000000c0000000 (reserved)
> (XEN) 00000000fec00000 - 00000000fec01000 (reserved)
> (XEN) 00000000fee00000 - 00000000fef00000 (reserved)
> (XEN) 00000000ff780000 - 0000000100000000 (reserved)
> (XEN) 0000000100000000 - 0000000140000000 (usable)
> (XEN) ACPI: RSDP 000FB840, 0024 (r2 ACPIAM)
> (XEN) ACPI: XSDT BFFC0100, 004C (r1 A_M_I_ OEMXSDT 3000826 MSFT 97)
> (XEN) ACPI: FACP BFFC0290, 00F4 (r3 A_M_I_ OEMFACP 3000826 MSFT 97)
> (XEN) ACPI: DSDT BFFC05C0, 4E38 (r1 A0557 A0557000 0 INTL 20051117)
> (XEN) ACPI: FACS BFFCE000, 0040
> (XEN) ACPI: APIC BFFC0390, 0070 (r1 A_M_I_ OEMAPIC 3000826 MSFT 97)
> (XEN) ACPI: MCFG BFFC0400, 003C (r1 A_M_I_ OEMMCFG 3000826 MSFT 97)
> (XEN) ACPI: OEMB BFFCE040, 0060 (r1 A_M_I_ AMI_OEM 3000826 MSFT 97)
> (XEN) ACPI: HPET BFFC5400, 0038 (r1 A_M_I_ OEMHPET0 3000826 MSFT 97)
> (XEN) System RAM: 4095MB (4193660kB)
> (XEN) No NUMA configuration found
> (XEN) Faking a node at 0000000000000000-0000000140000000
> (XEN) Domain heap initialised
> (XEN) found SMP MP-table at 000ff780
> (XEN) DMI present.
> (XEN) APIC boot state is 'xapic'
> (XEN) Using APIC driver default
> (XEN) ACPI: PM-Timer IO Port: 0x508
> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[504,0], pm1x_evt[500,0]
> (XEN) ACPI: wakeup_vec[bffce00c], vec_size[20]
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> (XEN) Processor #0 15:3 APIC version 16
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> (XEN) Processor #1 15:3 APIC version 16
> (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> (XEN) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ9 used by override.
> (XEN) ACPI: IRQ14 used by override.
> (XEN) ACPI: IRQ15 used by override.
> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
> (XEN) ACPI: HPET id: 0x10de8201 base: 0xfed00000
> (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
> (XEN) PCI: Not using MMCONFIG.
> (XEN) Table is not found!
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) mapped APIC to ffff82c3ffffe000 (fee00000)
> (XEN) mapped IOAPIC to ffff82c3ffffd000 (fec00000)
> (XEN) IRQ limits: 24 GSI, 376 MSI/MSI-X
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Detected 2611.923 MHz processor.
> (XEN) Initing memory sharing.
> (XEN) AMD K8 machine check reporting enabled
> (XEN) AMD-Vi: IOMMU not found!
> (XEN) I/O virtualisation disabled
> (XEN) Getting VERSION: 80050010
> (XEN) Getting VERSION: 80050010
> (XEN) Getting ID: 0
> (XEN) Getting LVT0: 700
> (XEN) Getting LVT1: 400
> (XEN) enabled ExtINT on CPU#0
> (XEN) ESR value before enabling vector: 0x00000004 after: 0x00000000
> (XEN) ENABLING IO-APIC IRQs
> (XEN) -> Using new ACK method
> (XEN) init IO_APIC IRQs
> (XEN) IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22,
> 2-23 not connected.
> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=0 apic2=-1 pin2=-1
> (XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> (XEN) ...trying to set up timer (IRQ0) through the 8259A ... failed.
> (XEN) ...trying to set up timer as Virtual Wire IRQ... failed.
> (XEN) ...trying to set up timer as ExtINT IRQ... failed :(.
> (XEN)
> (XEN) ****************************************
> (XEN) Panic on CPU 0:
> (XEN) IO-APIC + timer doesn't work! Boot with apic_verbosity=debug and
> send a report. Then try booting with the 'noapic'
> option****************************************
> (XEN)
> (XEN) Reboot in five seconds...
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2
2011-12-22 13:28 ` Jan Beulich
@ 2011-12-22 13:32 ` Florian Manschwetus
0 siblings, 0 replies; 9+ messages in thread
From: Florian Manschwetus @ 2011-12-22 13:32 UTC (permalink / raw)
To: Jan Beulich; +Cc: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 1208 bytes --]
Am 22.12.2011 14:28, schrieb Jan Beulich:
>>>> On 22.12.11 at 14:11, Florian Manschwetus<florianmanschwetus@gmx.de> wrote:
>> Looks acpi_skip_timer_override is not the solution:
>
> That's unfortunate. Next thing for us to know is whether you have
> been told any workaround on the native Linux side to make the
> respective messages disappear (i.e. to consider porting over those
> bits, if they exist).
I not used any workaround to get the linux booting, it is an kde sabayon
amd64, where I installed using portage gentoo-sources, xen, xen-tools,
openvswitch
Then gentoo sources compiled following the sabayon custom kernel howto
using genkernel, with a slightly modified default config (read as the
config of the original sabayon kernel binary) to support dom0.
Thx,
Florian
>
> If there's no solution known on native Linux, then some debugging
> will need to be done with that system (a first guess would then be
> that the system is actually reporting the wrong override
>
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
>
> meaning to actually specify global_irq as 2, which would be pretty
> strait forward to hack in for an experiment).
>
> Jan
[-- Attachment #1.2: S/MIME Kryptografische Unterschrift --]
[-- Type: application/pkcs7-signature, Size: 2332 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2011-12-22 13:32 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <4EF06B14.4070106@gmx.de>
[not found] ` <4EF0B034.1090708@gmx.de>
2011-12-21 23:49 ` [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2 Florian Manschwetus
2011-12-22 9:32 ` Jan Beulich
2011-12-22 9:49 ` Florian Manschwetus
[not found] ` <4EF2FCED.8010402@gmx.de>
2011-12-22 12:28 ` Jan Beulich
2011-12-22 13:11 ` Florian Manschwetus
2011-12-22 13:28 ` Jan Beulich
2011-12-22 13:32 ` Florian Manschwetus
2011-12-22 12:54 ` Igor Mammedov
2011-12-22 13:16 ` Florian Manschwetus
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).