xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@amd.com>
To: Jan Beulich <JBeulich@suse.com>
Cc: jeremy@goop.org, xen-devel@lists.xensource.com,
	konrad.wilk@oracle.com, "Shin, Jacob" <Jacob.Shin@amd.com>,
	linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@elte.hu,
	tglx@linutronix.de
Subject: Re: [PATCH] x86/amd: fix crash as Xen Dom0 on AMD Trinity systems
Date: Wed, 30 May 2012 16:02:48 +0200	[thread overview]
Message-ID: <4FC62888.9010407@amd.com> (raw)
In-Reply-To: <4FC63DAF0200007800086DC5@nat28.tlf.novell.com>

On 05/30/2012 03:33 PM, Jan Beulich wrote:
>>>> On 30.05.12 at 15:10, Andre Przywara<andre.przywara@amd.com>  wrote:
>> Because we are behind a family check before tweaking the topology
>> bit, we can use the standard rd/wrmsr variants for the CPUID feature
>> register.
>> This fixes a crash when using the kernel as a Xen Dom0 on affected
>> Trinity systems. The wrmsrl_amd_safe is not properly paravirtualized
>> yet (this will be fixed in another patch).
>
> I'm not following: If the AMD variants (putting a special value into
> %edi) can be freely replaced by the non-AMD variants, why did
> the AMD special ones get used in the first place?

Older CPUs (K8) needed the AMD variants, starting with family 10h we can 
use the normal versions.

> Further, I can't see how checking_wrmsrl() is being paravirtualized
> any better than wrmsrl_amd_safe() - both have nothing but an
> exception handling fixup attached to the wrmsr invocation. Care
> to point out what actual crash it is that was seen?

AFAIK, the difference is between the "l" and the regs version for 
rd/wrmsr. We have a patch already here to fix this. Will send it out 
soon. Jacob, can you comment on this?

The crash dump:

[    1.601021] ------------[ cut here ]------------
[    1.601025] kernel BUG at 
/buildrepos/linux-2.6-stable/arch/x86/include/asm/paravirt.h:133!
[    1.601031] invalid opcode: 0000 [#1] SMP
[    1.601038] CPU 0
[    1.601041] Modules linked in:
[    1.601047]
[    1.601050] Pid: 0, comm: swapper/0 Not tainted 3.4.0 #1 AMD Virgo 
Platform/Annapurna
[    1.601061] RIP: e030:[<ffffffff8169b4fe>]  [<ffffffff8169b4fe>] 
init_amd+0x21d/0x603
[    1.601072] RSP: e02b:ffffffff81c01df8  EFLAGS: 00010246
[    1.601076] RAX: 0000000000000000 RBX: ffffffff81ca7500 RCX: 
0000000000000000
[    1.601081] RDX: 0000000000000020 RSI: 000000000000c000 RDI: 
ffffffff81c01e78
[    1.601086] RBP: ffffffff81c01ea8 R08: 0000000000004003 R09: 
00000000ffffffff
[    1.601090] R10: 0000000000000000 R11: 00000000ffffffff R12: 
ffffffff81ca7574
[    1.601095] R13: ffffffff81ca7514 R14: ffffffff81ca754c R15: 
ffffffff81ca756c
[    1.601103] FS:  0000000000000000(0000) GS:ffff8801ce600000(0000) 
knlGS:0000000000000000
[    1.601108] CS:  e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[    1.601112] CR2: 0000000000000000 CR3: 0000000001c0c000 CR4: 
0000000000040660
[    1.601117] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 
0000000000000000
[    1.601122] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 
0000000000000400
[    1.601127] Process swapper/0 (pid: 0, threadinfo ffffffff81c00000, 
task ffffffff81c14020)
[    1.601131] Stack:
[    1.601134]  ffffffff81c01ea8 ffffffff8169a7d8 0000001600000017 
0000000000000000
[    1.601146]  ffff8801c1c3ac00 ffff8801c1c002d0 ffffffff81c01e48 
ffffffff81140118
[    1.601157]  ffffffff811415cc ffff8801c1c04220 ffff8801c1c02480 
00000000000000d0
[    1.601169] Call Trace:
[    1.601175]  [<ffffffff8169a7d8>] ? get_cpu_cap+0x1f2/0x201
[    1.601183]  [<ffffffff81140118>] ? init_kmem_cache_cpus+0x3e/0x4d
[    1.601189]  [<ffffffff811415cc>] ? sysfs_slab_alias+0x60/0x8d
[    1.601195]  [<ffffffff8169aa3d>] identify_cpu+0x256/0x34d
[    1.601201]  [<ffffffff81141649>] ? kmem_cache_alloc+0x50/0xe4
[    1.601209]  [<ffffffff81cd1c51>] identify_boot_cpu+0x10/0x3c
[    1.601216]  [<ffffffff81cd2052>] check_bugs+0x9/0x2d
[    1.601222]  [<ffffffff81cc7e08>] start_kernel+0x445/0x461
[    1.601227]  [<ffffffff81cc77d6>] ? kernel_init+0x1d8/0x1d8
[    1.601233]  [<ffffffff81cc72cf>] x86_64_start_reservations+0xba/0xc1
[    1.601240]  [<ffffffff81041797>] ? xen_setup_runstate_info+0x2c/0x36
[    1.601247]  [<ffffffff81ccbdc4>] xen_start_kernel+0x58b/0x592
[    1.601251] Code: 0f 85 d3 00 00 00 31 c0 48 83 3d cd 5c 58 00 00 48 
8d 7d b0 b9 08 00 00 00 f3
ab c7 45 b4 05 10 01 c0 c7 45 cc 3a 20 5a 9c 75 04 <0f> 0b eb fe 4c 8d 
75 b0 4c 89 f7 ff 14 25 b0 11
c2 81 85 c0 8b
[    1.601374] RIP  [<ffffffff8169b4fe>] init_amd+0x21d/0x603
[    1.601381]  RSP <ffffffff81c01df8>
[    1.601391] ---[ end trace a7919e7f17c0a725 ]---
[    1.601397] Kernel panic - not syncing: Attempted to kill the idle task!

> Finally, I would question whether re-enabling the topology
> extensions under Xen shouldn't be skipped altogether, perhaps
> even on Dom0 (as the hypervisor is controlling this MSR, but in
> any case on DomU - the hypervisor won't allow (read: ignore,
> not fault on) the write anyway (and will log a message for each
> (v)CPU that attempts this).

This is probably right. Let me think about this.

Thanks for picking this up.

Regards,
Andre.

>
>> Signed-off-by: Andre Przywara<andre.przywara@amd.com>
>> Cc: stable@vger.kernel.org # 3.4+
>> ---
>>   arch/x86/kernel/cpu/amd.c |    4 ++--
>>   1 files changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
>> index 146bb62..80ccd99 100644
>> --- a/arch/x86/kernel/cpu/amd.c
>> +++ b/arch/x86/kernel/cpu/amd.c
>> @@ -586,9 +586,9 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
>>   	    !cpu_has(c, X86_FEATURE_TOPOEXT)) {
>>   		u64 val;
>>
>> -		if (!rdmsrl_amd_safe(0xc0011005,&val)) {
>> +		if (!rdmsrl_safe(0xc0011005,&val)) {
>>   			val |= 1ULL<<  54;
>> -			wrmsrl_amd_safe(0xc0011005, val);
>> +			checking_wrmsrl(0xc0011005, val);
>>   			rdmsrl(0xc0011005, val);
>>   			if (val&  (1ULL<<  54)) {
>>   				set_cpu_cap(c, X86_FEATURE_TOPOEXT);
>
>
>


-- 
Andre Przywara
AMD-Operating System Research Center (OSRC), Dresden, Germany

  reply	other threads:[~2012-05-30 14:02 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-30 13:10 [PATCH] x86/amd: fix crash as Xen Dom0 on AMD Trinity systems Andre Przywara
2012-05-30 13:33 ` Jan Beulich
2012-05-30 14:02   ` Andre Przywara [this message]
2012-05-30 14:23     ` Jan Beulich
2012-05-30 14:42       ` [Xen-devel] " H. Peter Anvin
2012-05-30 14:49         ` Konrad Rzeszutek Wilk
2012-05-30 15:12           ` Borislav Petkov
2012-05-30 15:40             ` Jan Beulich
2012-05-30 15:45               ` H. Peter Anvin
2012-05-30 15:58               ` Borislav Petkov
2012-05-30 14:48     ` Jacob Shin
2012-05-30 14:50       ` Konrad Rzeszutek Wilk
2012-05-30 15:03         ` Jacob Shin
2012-05-30 17:17           ` Konrad Rzeszutek Wilk
2012-05-30 17:31             ` H. Peter Anvin
2012-05-30 22:23               ` Konrad Rzeszutek Wilk
2012-05-30 17:32             ` Borislav Petkov
2012-05-30 17:47               ` [PATCH] x86, AMD: Fix " Borislav Petkov
2012-05-30 17:47               ` [Xen-devel] [PATCH] x86/amd: fix " H. Peter Anvin
2012-05-30 17:51                 ` Borislav Petkov
2012-05-30 18:00                   ` H. Peter Anvin
2012-05-30 18:17                     ` Borislav Petkov
2012-05-30 18:19                       ` Borislav Petkov
2012-05-30 18:21                         ` H. Peter Anvin
2012-05-30 18:29                           ` Borislav Petkov
2012-05-30 18:20                       ` H. Peter Anvin
2012-05-30 22:33                         ` Konrad Rzeszutek Wilk
2012-05-30 23:09                           ` H. Peter Anvin
2012-06-06  9:27                             ` Ingo Molnar
2012-06-06  9:42                               ` Borislav Petkov
2012-06-06  9:45                                 ` Ingo Molnar
2012-05-31 12:24                           ` Andre Przywara
2012-05-31 15:27                             ` [Xen-devel] " Konrad Rzeszutek Wilk
2012-05-31  7:39                       ` Jan Beulich
2012-05-31 16:55                         ` Borislav Petkov
2012-05-31  7:17             ` Jan Beulich
2012-05-31 15:59               ` H. Peter Anvin
2012-05-30 14:39 ` Konrad Rzeszutek Wilk
2012-05-30 14:50   ` H. Peter Anvin
2012-05-30 14:51     ` Konrad Rzeszutek Wilk
2012-05-30 15:08     ` Jan Beulich
2012-05-30 15:15       ` H. Peter Anvin
2012-05-30 15:35         ` Jan Beulich
2012-05-30 16:48           ` Konrad Rzeszutek Wilk
2012-05-30 14:42 ` H. Peter Anvin
2012-05-30 14:55   ` Borislav Petkov
2012-05-30 14:58     ` H. Peter Anvin
2012-05-30 15:00       ` Borislav Petkov
2012-05-30 15:01         ` H. Peter Anvin
2012-05-30 15:05           ` Borislav Petkov
2012-05-30 23:31 ` H. Peter Anvin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4FC62888.9010407@amd.com \
    --to=andre.przywara@amd.com \
    --cc=JBeulich@suse.com \
    --cc=Jacob.Shin@amd.com \
    --cc=hpa@zytor.com \
    --cc=jeremy@goop.org \
    --cc=konrad.wilk@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=tglx@linutronix.de \
    --cc=xen-devel@lists.xensource.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).