* [ANNOUNCE] Third release candidates for 4.0.4 and 4.1.3 @ 2012-07-22 15:42 Keir Fraser 2012-07-26 10:04 ` Ren, Yongjie 2012-08-10 11:49 ` Lars Kurth 0 siblings, 2 replies; 9+ messages in thread From: Keir Fraser @ 2012-07-22 15:42 UTC (permalink / raw) To: xen-devel Folks, I have just tagged 3rd release candidates for 4.0.4 and 4.1.3: http://xenbits.xen.org/staging/xen-4.0-testing.hg (tag 4.0.4-rc3) http://xenbits.xen.org/staging/xen-4.1-testing.hg (tag 4.1.3-rc3) Please test! Assuming nothing crops up, we will make these the official point releases at the end of this month. -- Keir ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [ANNOUNCE] Third release candidates for 4.0.4 and 4.1.3 2012-07-22 15:42 [ANNOUNCE] Third release candidates for 4.0.4 and 4.1.3 Keir Fraser @ 2012-07-26 10:04 ` Ren, Yongjie 2012-07-26 10:12 ` Ian Campbell 2012-07-26 14:18 ` Konrad Rzeszutek Wilk 2012-08-10 11:49 ` Lars Kurth 1 sibling, 2 replies; 9+ messages in thread From: Ren, Yongjie @ 2012-07-26 10:04 UTC (permalink / raw) To: Keir Fraser, xen-devel@lists.xen.org; +Cc: Konrad Rzeszutek Wilk I did a testing for 4.1.3-rc3 with Linux 3.4.6 as dom0. I met the following 3 issues. (1) Can't get deep C-state status via "xenpm" command. (2) Can't get P-state info via "xenpm" command. (3) HVM S3 resume error. No. 1 and No. 2 exists on 4.1.3-rc3, but don't exist on latest xen-unstable tree. No. 3 issue exists on both 4.1.3-rc3 and latest xen-unstable tree. CCed Konrad. As for the PM features, could it be the reason that xen 4.1.3 can't work very well with Linux 3.4.6 as Dom0? Details: (1) C-state issue Only C0 and C1 C-state via "xenpm get-cpuidle-states" command line; no info for C2 or C3. But xen-unstable tree (CS #25643) can have C0, C1, C2, C3. ----log here for 4.1.3------ [root@vt-nhm7 ~]# xenpm get-cpuidle-states 1 Max C-state: C7 cpu id : 1 total C-states : 2 idle time(ms) : 477336 C0 : transition [00000000000000000001] residency [00000000000000008629 ms] C1 : transition [00000000000000000001] residency [00000000000000477336 ms] pc3 : [00000000000000000000 ms] pc6 : [00000000000000000000 ms] pc7 : [00000000000000000000 ms] cc3 : [00000000000000000000 ms] cc6 : [00000000000000000000 ms] ------------ ---log for 4.2-unstable tree ---- [root@vt-nhm7 ~]# xenpm get-cpuidle-states 1 Max possible C-state: C7 cpu id : 1 total C-states : 4 idle time(ms) : 139164 C0 : transition [ 3189] residency [ 67719 ms] C1 : transition [ 162] residency [ 4739 ms] C2 : transition [ 9] residency [ 44 ms] C3 : transition [ 3018] residency [ 75951 ms] pc2 : [ 0 ms] pc3 : [ 758 ms] pc6 : [ 28187 ms] pc7 : [ 0 ms] cc3 : [ 1335 ms] cc6 : [ 71613 ms] cc7 : [ 0 ms] ---- (2) P-state issue No P-state info via "xenpm get-cpufreq-states" command line. But xen-unstable tree (CS#25643 ) works fine for P-state. --- log here for 4.1.3-- [root@vt-nhm7 ~]# xenpm get-cpufreq-states 1 [root@vt-nhm7 ~]# -------------- --- log for 4.2-unstable ----- [root@vt-nhm7 ~]# xenpm get-cpufreq-states 1 cpu id : 1 total P-states : 10 usable P-states : 10 current frequency : 1596 MHz P0 [2794 MHz]: transition [ 1] residency [ 0 ms] P1 [2793 MHz]: transition [ 0] residency [ 0 ms] P2 [2660 MHz]: transition [ 0] residency [ 0 ms] P3 [2527 MHz]: transition [ 0] residency [ 0 ms] P4 [2394 MHz]: transition [ 0] residency [ 0 ms] P5 [2261 MHz]: transition [ 0] residency [ 0 ms] P6 [2128 MHz]: transition [ 0] residency [ 0 ms] P7 [1995 MHz]: transition [ 0] residency [ 0 ms] P8 [1862 MHz]: transition [ 0] residency [ 0 ms] *P9 [1596 MHz]: transition [ 1] residency [ 7 ms] ----------- (3) HVM S3 resume issue Error occurred when resuming from S3. Both 4.1.3 and xen-unstable tree have the same issue. -----console log for S3 resume ------------ Red Hat Enterprise Linux Server release 6.2 (Santiago) Kernel 2.6.32-220.el6.x86_64 on an x86_64 rhel6u2-GA.guest login: eth0: no IPv6 routers present PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. Suspending console(s) (use no_console_suspend to debug) ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... Back to C! ACPI: Waking up from system sleep state S3 ata_piix 0000:00:01.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005) xen-platform-pci 0000:00:03.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 WARNING: g.e. still in use! WARNING: leaking g.e. and page still in use! WARNING: g.e. still in use! WARNING: leaking g.e. and page still in use! WARNING: g.e. still in use! WARNING: leaking g.e. and page still in use! pm_op(): platform_pm_resume+0x0/0x50 returns -19 PM: Device i8042 failed to resume: error -19 Restarting tasks ... done. ---------if I use keyboard to type some keys and "Ctrl+C" after resume, it will show the following call trace----------- INFO: task flush-202:0:342 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. flush-202:0 D 0000000000000000 0 342 2 0x00000000 ffff88003d83b5b0 0000000000000046 ffff88003d83b620 ffffffff811238a1 ffff8800000106c0 ffff880000000001 ffff88003adf8100 ffff88003d83b748 ffff880037c45b38 ffff88003d83bfd8 000000000000f4e8 ffff880037c45b38 Call Trace: [<ffffffff811238a1>] ? __alloc_pages_nodemask+0x111/0x940 [<ffffffff81090ede>] ? prepare_to_wait+0x4e/0x80 [<ffffffffa006009d>] do_get_write_access+0x29d/0x520 [jbd2] [<ffffffff81090c30>] ? wake_bit_function+0x0/0x50 [<ffffffffa0060471>] jbd2_journal_get_write_access+0x31/0x50 [jbd2] [<ffffffffa00b4b88>] __ext4_journal_get_write_access+0x38/0x80 [ext4] [<ffffffffa00b6a42>] ext4_mb_mark_diskspace_used+0xf2/0x300 [ext4] [<ffffffffa00bdc19>] ext4_mb_new_blocks+0x2a9/0x560 [ext4] [<ffffffffa00b0f1e>] ? ext4_ext_find_extent+0x2be/0x320 [ext4] [<ffffffffa00b3fd3>] ext4_ext_get_blocks+0x1113/0x1a10 [ext4] [<ffffffff81250132>] ? generic_make_request+0x2b2/0x5c0 [<ffffffffa0091335>] ext4_get_blocks+0xf5/0x2a0 [ext4] [<ffffffff811271a5>] ? pagevec_lookup_tag+0x25/0x40 [<ffffffffa00922fc>] mpage_da_map_blocks+0xac/0x450 [ext4] [<ffffffffa005f3c5>] ? jbd2_journal_start+0xb5/0x100 [jbd2] [<ffffffffa0092f37>] ext4_da_writepages+0x2f7/0x660 [ext4] [<ffffffff81126351>] do_writepages+0x21/0x40 [<ffffffff811a046d>] writeback_single_inode+0xdd/0x2c0 [<ffffffff811a08ae>] writeback_sb_inodes+0xce/0x180 [<ffffffff811a0a0b>] writeback_inodes_wb+0xab/0x1b0 [<ffffffff811a0dab>] wb_writeback+0x29b/0x3f0 [<ffffffff814eca40>] ? thread_return+0x4e/0x77e [<ffffffff8107cc02>] ? del_timer_sync+0x22/0x30 [<ffffffff811a1099>] wb_do_writeback+0x199/0x240 [<ffffffff811a11a3>] bdi_writeback_task+0x63/0x1b0 [<ffffffff81090ab7>] ? bit_waitqueue+0x17/0xd0 [<ffffffff81134d40>] ? bdi_start_fn+0x0/0x100 [<ffffffff81134dc6>] bdi_start_fn+0x86/0x100 [<ffffffff81134d40>] ? bdi_start_fn+0x0/0x100 [<ffffffff81090886>] kthread+0x96/0xa0 [<ffffffff8100c14a>] child_rip+0xa/0x20 [<ffffffff810907f0>] ? kthread+0x0/0xa0 [<ffffffff8100c140>] ? child_rip+0x0/0x20 ------------------------- (END of this email.) Best Regards, Yongjie (Jay) > -----Original Message----- > From: xen-devel-bounces@lists.xen.org > [mailto:xen-devel-bounces@lists.xen.org] On Behalf Of Keir Fraser > Sent: Sunday, July 22, 2012 11:42 PM > To: xen-devel@lists.xen.org > Subject: [Xen-devel] [ANNOUNCE] Third release candidates for 4.0.4 and > 4.1.3 > > Folks, > > I have just tagged 3rd release candidates for 4.0.4 and 4.1.3: > > http://xenbits.xen.org/staging/xen-4.0-testing.hg (tag 4.0.4-rc3) > http://xenbits.xen.org/staging/xen-4.1-testing.hg (tag 4.1.3-rc3) > > Please test! Assuming nothing crops up, we will make these the official > point releases at the end of this month. > > -- Keir > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xen.org > http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [ANNOUNCE] Third release candidates for 4.0.4 and 4.1.3 2012-07-26 10:04 ` Ren, Yongjie @ 2012-07-26 10:12 ` Ian Campbell 2012-07-26 10:20 ` Ren, Yongjie 2012-07-26 14:18 ` Konrad Rzeszutek Wilk 1 sibling, 1 reply; 9+ messages in thread From: Ian Campbell @ 2012-07-26 10:12 UTC (permalink / raw) To: Ren, Yongjie Cc: Konrad Rzeszutek Wilk, Keir (Xen.org), xen-devel@lists.xen.org On Thu, 2012-07-26 at 11:04 +0100, Ren, Yongjie wrote: > I did a testing for 4.1.3-rc3 with Linux 3.4.6 as dom0. > I met the following 3 issues. > (1) Can't get deep C-state status via "xenpm" command. > (2) Can't get P-state info via "xenpm" command. > (3) HVM S3 resume error. > No. 1 and No. 2 exists on 4.1.3-rc3, but don't exist on latest xen-unstable tree. > No. 3 issue exists on both 4.1.3-rc3 and latest xen-unstable tree. What was the status of these 3 in 4.1.2? i.e. is this a regression in the 4.1.x branch or not? > CCed Konrad. > As for the PM features, could it be the reason that xen 4.1.3 can't work very well with Linux 3.4.6 as Dom0? > > Details: > (1) C-state issue > Only C0 and C1 C-state via "xenpm get-cpuidle-states" command line; no info for C2 or C3. > But xen-unstable tree (CS #25643) can have C0, C1, C2, C3. > ----log here for 4.1.3------ > [root@vt-nhm7 ~]# xenpm get-cpuidle-states 1 > Max C-state: C7 > > cpu id : 1 > total C-states : 2 > idle time(ms) : 477336 > C0 : transition [00000000000000000001] > residency [00000000000000008629 ms] > C1 : transition [00000000000000000001] > residency [00000000000000477336 ms] > pc3 : [00000000000000000000 ms] > pc6 : [00000000000000000000 ms] > pc7 : [00000000000000000000 ms] > cc3 : [00000000000000000000 ms] > cc6 : [00000000000000000000 ms] > ------------ > ---log for 4.2-unstable tree ---- > [root@vt-nhm7 ~]# xenpm get-cpuidle-states 1 > Max possible C-state: C7 > > cpu id : 1 > total C-states : 4 > idle time(ms) : 139164 > C0 : transition [ 3189] > residency [ 67719 ms] > C1 : transition [ 162] > residency [ 4739 ms] > C2 : transition [ 9] > residency [ 44 ms] > C3 : transition [ 3018] > residency [ 75951 ms] > pc2 : [ 0 ms] > pc3 : [ 758 ms] > pc6 : [ 28187 ms] > pc7 : [ 0 ms] > cc3 : [ 1335 ms] > cc6 : [ 71613 ms] > cc7 : [ 0 ms] > ---- > > (2) P-state issue > No P-state info via "xenpm get-cpufreq-states" command line. > But xen-unstable tree (CS#25643 ) works fine for P-state. > --- log here for 4.1.3-- > [root@vt-nhm7 ~]# xenpm get-cpufreq-states 1 > [root@vt-nhm7 ~]# > -------------- > > --- log for 4.2-unstable ----- > [root@vt-nhm7 ~]# xenpm get-cpufreq-states 1 > cpu id : 1 > total P-states : 10 > usable P-states : 10 > current frequency : 1596 MHz > P0 [2794 MHz]: transition [ 1] > residency [ 0 ms] > P1 [2793 MHz]: transition [ 0] > residency [ 0 ms] > P2 [2660 MHz]: transition [ 0] > residency [ 0 ms] > P3 [2527 MHz]: transition [ 0] > residency [ 0 ms] > P4 [2394 MHz]: transition [ 0] > residency [ 0 ms] > P5 [2261 MHz]: transition [ 0] > residency [ 0 ms] > P6 [2128 MHz]: transition [ 0] > residency [ 0 ms] > P7 [1995 MHz]: transition [ 0] > residency [ 0 ms] > P8 [1862 MHz]: transition [ 0] > residency [ 0 ms] > *P9 [1596 MHz]: transition [ 1] > residency [ 7 ms] > ----------- > > (3) HVM S3 resume issue > Error occurred when resuming from S3. > Both 4.1.3 and xen-unstable tree have the same issue. > -----console log for S3 resume ------------ > Red Hat Enterprise Linux Server release 6.2 (Santiago) > Kernel 2.6.32-220.el6.x86_64 on an x86_64 > > rhel6u2-GA.guest login: eth0: no IPv6 routers present > PM: Syncing filesystems ... done. > Freezing user space processes ... (elapsed 0.00 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. > Suspending console(s) (use no_console_suspend to debug) > ACPI: Preparing to enter system sleep state S3 > Disabling non-boot CPUs ... > Back to C! > ACPI: Waking up from system sleep state S3 > ata_piix 0000:00:01.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005) > xen-platform-pci 0000:00:03.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 > WARNING: g.e. still in use! > WARNING: leaking g.e. and page still in use! > WARNING: g.e. still in use! > WARNING: leaking g.e. and page still in use! > WARNING: g.e. still in use! > WARNING: leaking g.e. and page still in use! > pm_op(): platform_pm_resume+0x0/0x50 returns -19 > PM: Device i8042 failed to resume: error -19 > Restarting tasks ... done. > ---------if I use keyboard to type some keys and "Ctrl+C" after resume, it will show the following call trace----------- > INFO: task flush-202:0:342 blocked for more than 120 seconds. > "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. > flush-202:0 D 0000000000000000 0 342 2 0x00000000 > ffff88003d83b5b0 0000000000000046 ffff88003d83b620 ffffffff811238a1 > ffff8800000106c0 ffff880000000001 ffff88003adf8100 ffff88003d83b748 > ffff880037c45b38 ffff88003d83bfd8 000000000000f4e8 ffff880037c45b38 > Call Trace: > [<ffffffff811238a1>] ? __alloc_pages_nodemask+0x111/0x940 > [<ffffffff81090ede>] ? prepare_to_wait+0x4e/0x80 > [<ffffffffa006009d>] do_get_write_access+0x29d/0x520 [jbd2] > [<ffffffff81090c30>] ? wake_bit_function+0x0/0x50 > [<ffffffffa0060471>] jbd2_journal_get_write_access+0x31/0x50 [jbd2] > [<ffffffffa00b4b88>] __ext4_journal_get_write_access+0x38/0x80 [ext4] > [<ffffffffa00b6a42>] ext4_mb_mark_diskspace_used+0xf2/0x300 [ext4] > [<ffffffffa00bdc19>] ext4_mb_new_blocks+0x2a9/0x560 [ext4] > [<ffffffffa00b0f1e>] ? ext4_ext_find_extent+0x2be/0x320 [ext4] > [<ffffffffa00b3fd3>] ext4_ext_get_blocks+0x1113/0x1a10 [ext4] > [<ffffffff81250132>] ? generic_make_request+0x2b2/0x5c0 > [<ffffffffa0091335>] ext4_get_blocks+0xf5/0x2a0 [ext4] > [<ffffffff811271a5>] ? pagevec_lookup_tag+0x25/0x40 > [<ffffffffa00922fc>] mpage_da_map_blocks+0xac/0x450 [ext4] > [<ffffffffa005f3c5>] ? jbd2_journal_start+0xb5/0x100 [jbd2] > [<ffffffffa0092f37>] ext4_da_writepages+0x2f7/0x660 [ext4] > [<ffffffff81126351>] do_writepages+0x21/0x40 > [<ffffffff811a046d>] writeback_single_inode+0xdd/0x2c0 > [<ffffffff811a08ae>] writeback_sb_inodes+0xce/0x180 > [<ffffffff811a0a0b>] writeback_inodes_wb+0xab/0x1b0 > [<ffffffff811a0dab>] wb_writeback+0x29b/0x3f0 > [<ffffffff814eca40>] ? thread_return+0x4e/0x77e > [<ffffffff8107cc02>] ? del_timer_sync+0x22/0x30 > [<ffffffff811a1099>] wb_do_writeback+0x199/0x240 > [<ffffffff811a11a3>] bdi_writeback_task+0x63/0x1b0 > [<ffffffff81090ab7>] ? bit_waitqueue+0x17/0xd0 > [<ffffffff81134d40>] ? bdi_start_fn+0x0/0x100 > [<ffffffff81134dc6>] bdi_start_fn+0x86/0x100 > [<ffffffff81134d40>] ? bdi_start_fn+0x0/0x100 > [<ffffffff81090886>] kthread+0x96/0xa0 > [<ffffffff8100c14a>] child_rip+0xa/0x20 > [<ffffffff810907f0>] ? kthread+0x0/0xa0 > [<ffffffff8100c140>] ? child_rip+0x0/0x20 > ------------------------- > (END of this email.) > > > Best Regards, > Yongjie (Jay) > > > -----Original Message----- > > From: xen-devel-bounces@lists.xen.org > > [mailto:xen-devel-bounces@lists.xen.org] On Behalf Of Keir Fraser > > Sent: Sunday, July 22, 2012 11:42 PM > > To: xen-devel@lists.xen.org > > Subject: [Xen-devel] [ANNOUNCE] Third release candidates for 4.0.4 and > > 4.1.3 > > > > Folks, > > > > I have just tagged 3rd release candidates for 4.0.4 and 4.1.3: > > > > http://xenbits.xen.org/staging/xen-4.0-testing.hg (tag 4.0.4-rc3) > > http://xenbits.xen.org/staging/xen-4.1-testing.hg (tag 4.1.3-rc3) > > > > Please test! Assuming nothing crops up, we will make these the official > > point releases at the end of this month. > > > > -- Keir > > > > > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xen.org > > http://lists.xen.org/xen-devel > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xen.org > http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [ANNOUNCE] Third release candidates for 4.0.4 and 4.1.3 2012-07-26 10:12 ` Ian Campbell @ 2012-07-26 10:20 ` Ren, Yongjie 2012-07-26 10:38 ` Jan Beulich 0 siblings, 1 reply; 9+ messages in thread From: Ren, Yongjie @ 2012-07-26 10:20 UTC (permalink / raw) To: Ian Campbell Cc: Konrad Rzeszutek Wilk, Keir (Xen.org), xen-devel@lists.xen.org > -----Original Message----- > From: Ian Campbell [mailto:Ian.Campbell@citrix.com] > Sent: Thursday, July 26, 2012 6:13 PM > To: Ren, Yongjie > Cc: Keir (Xen.org); xen-devel@lists.xen.org; Konrad Rzeszutek Wilk > Subject: Re: [Xen-devel] [ANNOUNCE] Third release candidates for 4.0.4 > and 4.1.3 > > On Thu, 2012-07-26 at 11:04 +0100, Ren, Yongjie wrote: > > I did a testing for 4.1.3-rc3 with Linux 3.4.6 as dom0. > > I met the following 3 issues. > > (1) Can't get deep C-state status via "xenpm" command. > > (2) Can't get P-state info via "xenpm" command. > > (3) HVM S3 resume error. > > No. 1 and No. 2 exists on 4.1.3-rc3, but don't exist on latest xen-unstable > tree. > > No. 3 issue exists on both 4.1.3-rc3 and latest xen-unstable tree. > > What was the status of these 3 in 4.1.2? i.e. is this a regression in > the 4.1.x branch or not? > No. 1 and 2 should be a regression, because we have automatic test cases to cover the 2 issues. I also need a double check and will reply later. > > CCed Konrad. > > As for the PM features, could it be the reason that xen 4.1.3 can't work > very well with Linux 3.4.6 as Dom0? > > > > Details: > > (1) C-state issue > > Only C0 and C1 C-state via "xenpm get-cpuidle-states" command line; no > info for C2 or C3. > > But xen-unstable tree (CS #25643) can have C0, C1, C2, C3. > > ----log here for 4.1.3------ > > [root@vt-nhm7 ~]# xenpm get-cpuidle-states 1 > > Max C-state: C7 > > > > cpu id : 1 > > total C-states : 2 > > idle time(ms) : 477336 > > C0 : transition [00000000000000000001] > > residency [00000000000000008629 ms] > > C1 : transition [00000000000000000001] > > residency [00000000000000477336 ms] > > pc3 : [00000000000000000000 ms] > > pc6 : [00000000000000000000 ms] > > pc7 : [00000000000000000000 ms] > > cc3 : [00000000000000000000 ms] > > cc6 : [00000000000000000000 ms] > > ------------ > > ---log for 4.2-unstable tree ---- > > [root@vt-nhm7 ~]# xenpm get-cpuidle-states 1 > > Max possible C-state: C7 > > > > cpu id : 1 > > total C-states : 4 > > idle time(ms) : 139164 > > C0 : transition [ 3189] > > residency [ 67719 ms] > > C1 : transition [ 162] > > residency [ 4739 ms] > > C2 : transition [ 9] > > residency [ 44 ms] > > C3 : transition [ 3018] > > residency [ 75951 ms] > > pc2 : [ 0 ms] > > pc3 : [ 758 ms] > > pc6 : [ 28187 ms] > > pc7 : [ 0 ms] > > cc3 : [ 1335 ms] > > cc6 : [ 71613 ms] > > cc7 : [ 0 ms] > > ---- > > > > (2) P-state issue > > No P-state info via "xenpm get-cpufreq-states" command line. > > But xen-unstable tree (CS#25643 ) works fine for P-state. > > --- log here for 4.1.3-- > > [root@vt-nhm7 ~]# xenpm get-cpufreq-states 1 > > [root@vt-nhm7 ~]# > > -------------- > > > > --- log for 4.2-unstable ----- > > [root@vt-nhm7 ~]# xenpm get-cpufreq-states 1 > > cpu id : 1 > > total P-states : 10 > > usable P-states : 10 > > current frequency : 1596 MHz > > P0 [2794 MHz]: transition [ 1] > > residency [ 0 ms] > > P1 [2793 MHz]: transition [ 0] > > residency [ 0 ms] > > P2 [2660 MHz]: transition [ 0] > > residency [ 0 ms] > > P3 [2527 MHz]: transition [ 0] > > residency [ 0 ms] > > P4 [2394 MHz]: transition [ 0] > > residency [ 0 ms] > > P5 [2261 MHz]: transition [ 0] > > residency [ 0 ms] > > P6 [2128 MHz]: transition [ 0] > > residency [ 0 ms] > > P7 [1995 MHz]: transition [ 0] > > residency [ 0 ms] > > P8 [1862 MHz]: transition [ 0] > > residency [ 0 ms] > > *P9 [1596 MHz]: transition [ 1] > > residency [ 7 ms] > > ----------- > > > > (3) HVM S3 resume issue > > Error occurred when resuming from S3. > > Both 4.1.3 and xen-unstable tree have the same issue. > > -----console log for S3 resume ------------ > > Red Hat Enterprise Linux Server release 6.2 (Santiago) > > Kernel 2.6.32-220.el6.x86_64 on an x86_64 > > > > rhel6u2-GA.guest login: eth0: no IPv6 routers present > > PM: Syncing filesystems ... done. > > Freezing user space processes ... (elapsed 0.00 seconds) done. > > Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. > > Suspending console(s) (use no_console_suspend to debug) > > ACPI: Preparing to enter system sleep state S3 > > Disabling non-boot CPUs ... > > Back to C! > > ACPI: Waking up from system sleep state S3 > > ata_piix 0000:00:01.1: restoring config space at offset 0x1 (was > 0x2800000, writing 0x2800005) > > xen-platform-pci 0000:00:03.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 > > WARNING: g.e. still in use! > > WARNING: leaking g.e. and page still in use! > > WARNING: g.e. still in use! > > WARNING: leaking g.e. and page still in use! > > WARNING: g.e. still in use! > > WARNING: leaking g.e. and page still in use! > > pm_op(): platform_pm_resume+0x0/0x50 returns -19 > > PM: Device i8042 failed to resume: error -19 > > Restarting tasks ... done. > > ---------if I use keyboard to type some keys and "Ctrl+C" after resume, it > will show the following call trace----------- > > INFO: task flush-202:0:342 blocked for more than 120 seconds. > > "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this > message. > > flush-202:0 D 0000000000000000 0 342 2 0x00000000 > > ffff88003d83b5b0 0000000000000046 ffff88003d83b620 > ffffffff811238a1 > > ffff8800000106c0 ffff880000000001 ffff88003adf8100 > ffff88003d83b748 > > ffff880037c45b38 ffff88003d83bfd8 000000000000f4e8 > ffff880037c45b38 > > Call Trace: > > [<ffffffff811238a1>] ? __alloc_pages_nodemask+0x111/0x940 > > [<ffffffff81090ede>] ? prepare_to_wait+0x4e/0x80 > > [<ffffffffa006009d>] do_get_write_access+0x29d/0x520 [jbd2] > > [<ffffffff81090c30>] ? wake_bit_function+0x0/0x50 > > [<ffffffffa0060471>] jbd2_journal_get_write_access+0x31/0x50 [jbd2] > > [<ffffffffa00b4b88>] __ext4_journal_get_write_access+0x38/0x80 > [ext4] > > [<ffffffffa00b6a42>] ext4_mb_mark_diskspace_used+0xf2/0x300 [ext4] > > [<ffffffffa00bdc19>] ext4_mb_new_blocks+0x2a9/0x560 [ext4] > > [<ffffffffa00b0f1e>] ? ext4_ext_find_extent+0x2be/0x320 [ext4] > > [<ffffffffa00b3fd3>] ext4_ext_get_blocks+0x1113/0x1a10 [ext4] > > [<ffffffff81250132>] ? generic_make_request+0x2b2/0x5c0 > > [<ffffffffa0091335>] ext4_get_blocks+0xf5/0x2a0 [ext4] > > [<ffffffff811271a5>] ? pagevec_lookup_tag+0x25/0x40 > > [<ffffffffa00922fc>] mpage_da_map_blocks+0xac/0x450 [ext4] > > [<ffffffffa005f3c5>] ? jbd2_journal_start+0xb5/0x100 [jbd2] > > [<ffffffffa0092f37>] ext4_da_writepages+0x2f7/0x660 [ext4] > > [<ffffffff81126351>] do_writepages+0x21/0x40 > > [<ffffffff811a046d>] writeback_single_inode+0xdd/0x2c0 > > [<ffffffff811a08ae>] writeback_sb_inodes+0xce/0x180 > > [<ffffffff811a0a0b>] writeback_inodes_wb+0xab/0x1b0 > > [<ffffffff811a0dab>] wb_writeback+0x29b/0x3f0 > > [<ffffffff814eca40>] ? thread_return+0x4e/0x77e > > [<ffffffff8107cc02>] ? del_timer_sync+0x22/0x30 > > [<ffffffff811a1099>] wb_do_writeback+0x199/0x240 > > [<ffffffff811a11a3>] bdi_writeback_task+0x63/0x1b0 > > [<ffffffff81090ab7>] ? bit_waitqueue+0x17/0xd0 > > [<ffffffff81134d40>] ? bdi_start_fn+0x0/0x100 > > [<ffffffff81134dc6>] bdi_start_fn+0x86/0x100 > > [<ffffffff81134d40>] ? bdi_start_fn+0x0/0x100 > > [<ffffffff81090886>] kthread+0x96/0xa0 > > [<ffffffff8100c14a>] child_rip+0xa/0x20 > > [<ffffffff810907f0>] ? kthread+0x0/0xa0 > > [<ffffffff8100c140>] ? child_rip+0x0/0x20 > > ------------------------- > > (END of this email.) > > > > > > Best Regards, > > Yongjie (Jay) > > > > > -----Original Message----- > > > From: xen-devel-bounces@lists.xen.org > > > [mailto:xen-devel-bounces@lists.xen.org] On Behalf Of Keir Fraser > > > Sent: Sunday, July 22, 2012 11:42 PM > > > To: xen-devel@lists.xen.org > > > Subject: [Xen-devel] [ANNOUNCE] Third release candidates for 4.0.4 > and > > > 4.1.3 > > > > > > Folks, > > > > > > I have just tagged 3rd release candidates for 4.0.4 and 4.1.3: > > > > > > http://xenbits.xen.org/staging/xen-4.0-testing.hg (tag 4.0.4-rc3) > > > http://xenbits.xen.org/staging/xen-4.1-testing.hg (tag 4.1.3-rc3) > > > > > > Please test! Assuming nothing crops up, we will make these the official > > > point releases at the end of this month. > > > > > > -- Keir > > > > > > > > > > > > _______________________________________________ > > > Xen-devel mailing list > > > Xen-devel@lists.xen.org > > > http://lists.xen.org/xen-devel > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xen.org > > http://lists.xen.org/xen-devel > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [ANNOUNCE] Third release candidates for 4.0.4 and 4.1.3 2012-07-26 10:20 ` Ren, Yongjie @ 2012-07-26 10:38 ` Jan Beulich 2012-07-26 12:09 ` Ren, Yongjie 0 siblings, 1 reply; 9+ messages in thread From: Jan Beulich @ 2012-07-26 10:38 UTC (permalink / raw) To: Yongjie Ren Cc: Konrad Rzeszutek Wilk, Keir (Xen.org), Ian Campbell, xen-devel@lists.xen.org >>> On 26.07.12 at 12:20, "Ren, Yongjie" <yongjie.ren@intel.com> wrote: >> From: Ian Campbell [mailto:Ian.Campbell@citrix.com] >> On Thu, 2012-07-26 at 11:04 +0100, Ren, Yongjie wrote: >> > I did a testing for 4.1.3-rc3 with Linux 3.4.6 as dom0. >> > I met the following 3 issues. >> > (1) Can't get deep C-state status via "xenpm" command. >> > (2) Can't get P-state info via "xenpm" command. >> > (3) HVM S3 resume error. >> > No. 1 and No. 2 exists on 4.1.3-rc3, but don't exist on latest xen-unstable >> tree. >> > No. 3 issue exists on both 4.1.3-rc3 and latest xen-unstable tree. >> >> What was the status of these 3 in 4.1.2? i.e. is this a regression in >> the 4.1.x branch or not? >> > No. 1 and 2 should be a regression, because we have automatic test cases to > cover the 2 issues. This sort of contradicts your own suspicion that 3.4.x may not interact well with 4.1.x - is the known working case perhaps with some other kernel version used in Dom0 (albeit the support for this isn't that old yet in pv-ops)? Jan ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [ANNOUNCE] Third release candidates for 4.0.4 and 4.1.3 2012-07-26 10:38 ` Jan Beulich @ 2012-07-26 12:09 ` Ren, Yongjie 0 siblings, 0 replies; 9+ messages in thread From: Ren, Yongjie @ 2012-07-26 12:09 UTC (permalink / raw) To: Jan Beulich Cc: Konrad Rzeszutek Wilk, Keir (Xen.org), Ian Campbell, xen-devel@lists.xen.org > -----Original Message----- > From: Jan Beulich [mailto:JBeulich@suse.com] > Sent: Thursday, July 26, 2012 6:39 PM > To: Ren, Yongjie > Cc: Ian Campbell; xen-devel@lists.xen.org; Konrad Rzeszutek Wilk; Keir > (Xen.org) > Subject: Re: [Xen-devel] [ANNOUNCE] Third release candidates for 4.0.4 > and 4.1.3 > > >>> On 26.07.12 at 12:20, "Ren, Yongjie" <yongjie.ren@intel.com> wrote: > >> From: Ian Campbell [mailto:Ian.Campbell@citrix.com] > >> On Thu, 2012-07-26 at 11:04 +0100, Ren, Yongjie wrote: > >> > I did a testing for 4.1.3-rc3 with Linux 3.4.6 as dom0. > >> > I met the following 3 issues. > >> > (1) Can't get deep C-state status via "xenpm" command. > >> > (2) Can't get P-state info via "xenpm" command. > >> > (3) HVM S3 resume error. > >> > No. 1 and No. 2 exists on 4.1.3-rc3, but don't exist on latest > xen-unstable > >> tree. > >> > No. 3 issue exists on both 4.1.3-rc3 and latest xen-unstable tree. > >> > >> What was the status of these 3 in 4.1.2? i.e. is this a regression in > >> the 4.1.x branch or not? > >> > > No. 1 and 2 should be a regression, because we have automatic test > cases to > > cover the 2 issues. > > This sort of contradicts your own suspicion that 3.4.x may not > interact well with 4.1.x - is the known working case perhaps > with some other kernel version used in Dom0 (albeit the support > for this isn't that old yet in pv-ops)? > Finally, I did a test with an old dom0(2.6.32.57) in the following tree. git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git My first suspicion is right. :-) Issue 1 and 2 (C-state and P-state) can work well with 4.1.3-rc3 and old dom0. And issue 3 still exists. I think it doesn't block the release of xen 4.1.3. If using Xen 4.1.3 with Linux 3.4.x dom0, you may meet some small bugs. :-) Both 4.1.3-rc3 and 4.2-unstable tree have the following issues. A. HVM S3 issue as I mentioned. (I'll file a bug to track this.) B. a VGA display issue with a SR-IOV hot-plug case http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1812 ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [ANNOUNCE] Third release candidates for 4.0.4 and 4.1.3 2012-07-26 10:04 ` Ren, Yongjie 2012-07-26 10:12 ` Ian Campbell @ 2012-07-26 14:18 ` Konrad Rzeszutek Wilk 1 sibling, 0 replies; 9+ messages in thread From: Konrad Rzeszutek Wilk @ 2012-07-26 14:18 UTC (permalink / raw) To: Ren, Yongjie; +Cc: Keir Fraser, xen-devel@lists.xen.org On Thu, Jul 26, 2012 at 10:04:49AM +0000, Ren, Yongjie wrote: > I did a testing for 4.1.3-rc3 with Linux 3.4.6 as dom0. > I met the following 3 issues. > (1) Can't get deep C-state status via "xenpm" command. That might be due to the CONFIG_ACPI_PROCESSOR_AGGREGATOR being compiled in your kernel (df88b2d96e36d9a9e325bfcd12eb45671cbbc937). If you don't have CONFIG_ACPI_PROCESSOR_AGGREG.. as either module or built-in can you get to lower C-states? > (2) Can't get P-state info via "xenpm" command. That is strange. I seem to be able to get that. Using 4.1.3: (XEN) Latest ChangeSet: Sun Jul 22 16:39:00 2012 +0100 23324:e89be0dedeb4 This is on i3-2100 box (MSI MS-7680/H61M-P23 (MS-7680), BIOS V17.0 03/14/2011): cpu id : 0 total P-states : 16 usable P-states : 16 current frequency : 1600 MHz P0 : freq [3100 MHz] transition [00000000000000000015] residency [00000000000000000813 ms] P1 : freq [3000 MHz] transition [00000000000000000001] residency [00000000000000000007 ms] P2 : freq [2900 MHz] transition [00000000000000000001] residency [00000000000000000018 ms] P3 : freq [2800 MHz] transition [00000000000000000000] residency [00000000000000000000 ms] P4 : freq [2700 MHz] transition [00000000000000000000] residency [00000000000000000000 ms] P5 : freq [2600 MHz] transition [00000000000000000000] residency [00000000000000000000 ms] P6 : freq [2500 MHz] transition [00000000000000000000] residency [00000000000000000000 ms] P7 : freq [2400 MHz] transition [00000000000000000000] residency [00000000000000000000 ms] P8 : freq [2300 MHz] transition [00000000000000000000] residency [00000000000000000000 ms] P9 : freq [2200 MHz] transition [00000000000000000001] residency [00000000000000000020 ms] P10 : freq [2100 MHz] transition [00000000000000000000] residency [00000000000000000000 ms] P11 : freq [2000 MHz] transition [00000000000000000002] residency [00000000000000000015 ms] P12 : freq [1900 MHz] transition [00000000000000000000] residency [00000000000000000000 ms] P13 : freq [1800 MHz] transition [00000000000000000001] residency [00000000000000000000 ms] P14 : freq [1700 MHz] transition [00000000000000000001] residency [00000000000000000000 ms] *P15 : freq [1600 MHz] transition [00000000000000000013] residency [00000000000000001666 ms] .. and more > (3) HVM S3 resume error. > No. 1 and No. 2 exists on 4.1.3-rc3, but don't exist on latest xen-unstable tree. > No. 3 issue exists on both 4.1.3-rc3 and latest xen-unstable tree. > CCed Konrad. > As for the PM features, could it be the reason that xen 4.1.3 can't work very well with Linux 3.4.6 as Dom0? Could be, but in 3.4 was when the xen-acpi-processor was introduced so it _should_ be working. The only thought I have for the low C-states is the acpi_pad, but nothing else. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [ANNOUNCE] Third release candidates for 4.0.4 and 4.1.3 2012-07-22 15:42 [ANNOUNCE] Third release candidates for 4.0.4 and 4.1.3 Keir Fraser 2012-07-26 10:04 ` Ren, Yongjie @ 2012-08-10 11:49 ` Lars Kurth 2012-08-10 12:12 ` Keir Fraser 1 sibling, 1 reply; 9+ messages in thread From: Lars Kurth @ 2012-08-10 11:49 UTC (permalink / raw) To: xen-devel Keir, do we have a list of what has gone into these (worth highlighting). I can't see any CVE and XSA numbers and the check-in descriptions don't tell me an awful lot Lars On 22/07/2012 16:42, Keir Fraser wrote: > Folks, > > I have just tagged 3rd release candidates for 4.0.4 and 4.1.3: > > http://xenbits.xen.org/staging/xen-4.0-testing.hg (tag 4.0.4-rc3) > http://xenbits.xen.org/staging/xen-4.1-testing.hg (tag 4.1.3-rc3) > > Please test! Assuming nothing crops up, we will make these the official > point releases at the end of this month. > > -- Keir > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xen.org > http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [ANNOUNCE] Third release candidates for 4.0.4 and 4.1.3 2012-08-10 11:49 ` Lars Kurth @ 2012-08-10 12:12 ` Keir Fraser 0 siblings, 0 replies; 9+ messages in thread From: Keir Fraser @ 2012-08-10 12:12 UTC (permalink / raw) To: lars.kurth, xen-devel All of XSA-7 through XSA-11 are fixed in 4.1.3 and 4.0.4. So there's a good security argument for everyone to upgrade, quite apart from the various other fixes (e.g., there are over 100 patches in 4.1 branch since 4.1.2) -- libxl bug fixes, and a bunch of hypervisor stuff, fixing for particular systems, or particular minority usage cases, for example... There's no broader generalisation than that to be made really, each patch fixes some usually fairly minor issue, but they add up to a big bag of small fixes! XSA-7 to XSA-11 *are* called out explicitly in their respective changeset comments in both 4.0 and 4.1 repositories by the way. If you can't see them you may not be looking at the right thing. ;-) -- Keir On 10/08/2012 12:49, "Lars Kurth" <lars.kurth@xen.org> wrote: > Keir, > do we have a list of what has gone into these (worth highlighting). I > can't see any CVE and XSA numbers and the check-in descriptions don't > tell me an awful lot > Lars > > On 22/07/2012 16:42, Keir Fraser wrote: >> Folks, >> >> I have just tagged 3rd release candidates for 4.0.4 and 4.1.3: >> >> http://xenbits.xen.org/staging/xen-4.0-testing.hg (tag 4.0.4-rc3) >> http://xenbits.xen.org/staging/xen-4.1-testing.hg (tag 4.1.3-rc3) >> >> Please test! Assuming nothing crops up, we will make these the official >> point releases at the end of this month. >> >> -- Keir >> >> >> >> _______________________________________________ >> Xen-devel mailing list >> Xen-devel@lists.xen.org >> http://lists.xen.org/xen-devel > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xen.org > http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2012-08-10 12:12 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-07-22 15:42 [ANNOUNCE] Third release candidates for 4.0.4 and 4.1.3 Keir Fraser 2012-07-26 10:04 ` Ren, Yongjie 2012-07-26 10:12 ` Ian Campbell 2012-07-26 10:20 ` Ren, Yongjie 2012-07-26 10:38 ` Jan Beulich 2012-07-26 12:09 ` Ren, Yongjie 2012-07-26 14:18 ` Konrad Rzeszutek Wilk 2012-08-10 11:49 ` Lars Kurth 2012-08-10 12:12 ` Keir Fraser
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).