* Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful?
@ 2012-10-27 14:59 Teo En Ming (Zhang Enming)
2012-10-27 15:35 ` Teo En Ming (Zhang Enming)
0 siblings, 1 reply; 3+ messages in thread
From: Teo En Ming (Zhang Enming) @ 2012-10-27 14:59 UTC (permalink / raw)
To: xen-users@lists.xen.org, xen-devel@lists.xen.org,
Teo En Ming (Zhang Enming), Dariusz Krempa, Casey DeLorme,
Tobias Geiger
Hi,
I have just passed through my NVIDIA Geforce GTX 560 to CentOS 6.3
x86-64 HVM domU. I am wondering whether the Xen VGA Passthrough is
successful.
The following information is obtained from inside CentOS 6.3 x86-64 HVM
domU:
00:05.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX
560] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device 3527
Physical Slot: 5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 36
Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at d8000000 (64-bit, prefetchable) [size=64M]
Region 5: I/O ports at e000 [size=128]
[virtual] Expansion ROM at f1080000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us,
L1 <64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1,
Latency L0 <256ns, L1 <4us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [b4] Vendor Specific Information <?>
Kernel driver in use: nouveau
Kernel modules: nvidia, nouveau, nvidiafb
[root@centos63 ~]# lsmod | grep nouveau
nouveau 791165 2
ttm 82562 1 nouveau
drm_kms_helper 34122 1 nouveau
drm 250067 4 nouveau,ttm,drm_kms_helper
i2c_core 31276 14
tuner_simple,tda9887,tda8290,wm8775,tuner,cx25840,pvrusb2,v4l2_common,videodev,tveeprom,i2c_piix4,nouveau,drm_kms_helper,drm
mxm_wmi 1925 1 nouveau
video 21032 1 nouveau
wmi 6287 2 nouveau,mxm_wmi
Notice that the nouveau VGA driver is loaded and is in use. Is Xen VGA
Passthrough 100% successful? I have successfully installed the NVIDIA
driver but I couldn't get it to load, so I reverted back to the nouveau
driver.
I have such tough time getting Xen VGA Passthrough to work successfully
on Windows HVM domU that I am giving up on Xen VGA Passthrough to
Windows HVM domU!!! Windows 7 and Windows 8 HVM domU device manager
always report error code 43 with a yellow triangle. Windows XP HVM domU
device manager always report error code 10 with a yellow circle.
--
Yours sincerely,
Mr. Teo En Ming (Zhang Enming)
Singapore
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful? 2012-10-27 14:59 Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful? Teo En Ming (Zhang Enming) @ 2012-10-27 15:35 ` Teo En Ming (Zhang Enming) 2012-10-27 15:40 ` Teo En Ming (Zhang Enming) 0 siblings, 1 reply; 3+ messages in thread From: Teo En Ming (Zhang Enming) @ 2012-10-27 15:35 UTC (permalink / raw) To: Teo En Ming (Zhang Enming) Cc: xen-users@lists.xen.org, xen-devel@lists.xen.org My CentOS 6.3 x86-64 HVM domU configuration: # This configuration file will only work with Xen 4.1.3-rc1-pre and NOT # Xen 4.2-unstable due to the disk parameter. # # XL domain configuration file for Ubuntu 12.04 Precise Pangolin Beta 1 amd64 HVM domU # Please refer to "man xl.cfg" for further explanations. # See also docs/misc/xl-network-configuration.markdown and # docs/misc/xl-disk-configuration.txt # Written by Teo En Ming (Zhang Enming) # Email #1: teo.en.ming@gmail.com # Email #2: teo-en-ming@teo-en-ming.com # Mobile Phone: +65-8369-2618 # Country: Singapore # Date: 20 Mar 2012 Tue name="CentOS" builder="hvm" vcpus=2 memory=1024 on_poweroff="destroy" on_reboot="restart" on_crash="destroy" # Format compatible with Xen 4.2-unstable changeset 25070 only. disk=[ 'format=raw, vdev=hda, access=rw, target=/etc/xen/images/centos63.img', 'format=raw, vdev=hdc, access=ro, devtype=cdrom, target=/home/teo-en-ming/CentOS-6.3-x86_64-bin-DVD1.iso' ] # Format compatible with Xen 4.1.3-rc1-pre only. #disk=[ 'file:/var/lib/libvirt/images/Ubuntu-12.04-beta1-amd64.img,hda,w', 'file:/home/teo-en-ming/Downloads/ubuntu-12.04-beta1-dvd-amd64.iso,hdc:cdrom,r' ] vif=[ 'bridge=eth0,type=ioemu,model=e1000' ] #boot=[c|d|n] #Selects the emulated virtual device to boot from. Options are hard disk (c), cd-rom (d) or network/PXE (n). #Multiple options can be given and will be attempted in the order they are given. e.g. to boot from cd-rom #but fallback to the hard disk you can give dc. The default is cd. #boot="dc" boot="c" acpi=1 #xen_platform_pci=1 #viridian=1 stdvga=0 vnc=1 vnclisten="localhost" vncdisplay=0 vncunused=1 vncpasswd="" sdl=0 usb=1 usbdevice="tablet" gfx_passthru=1 # VGA Passthrough Gigabyte Geforce GTX 560 1 GB GDDR5 PCI Express x16 VGA card. pci = [ '01:00.0','01:00.1','00:1b.0','00:1a.0','00:1a.1','00:1a.2','00:1a.7','00:1d.0','00:1d.1','00:1d.2','00:1d.7' ] -- Yours sincerely, Mr. Teo En Ming (Zhang Enming) Singapore On 10/27/2012 10:59 PM, Teo En Ming (Zhang Enming) wrote: > Hi, > > I have just passed through my NVIDIA Geforce GTX 560 to CentOS 6.3 > x86-64 HVM domU. I am wondering whether the Xen VGA Passthrough is > successful. > > The following information is obtained from inside CentOS 6.3 x86-64 > HVM domU: > > 00:05.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce > GTX 560] (rev a1) (prog-if 00 [VGA controller]) > Subsystem: Giga-byte Technology Device 3527 > Physical Slot: 5 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Interrupt: pin A routed to IRQ 36 > Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] > Region 1: Memory at d0000000 (64-bit, prefetchable) [size=128M] > Region 3: Memory at d8000000 (64-bit, prefetchable) [size=64M] > Region 5: I/O ports at e000 [size=128] > [virtual] Expansion ROM at f1080000 [disabled] [size=512K] > Capabilities: [60] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > <4us, L1 <64us > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- > TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, > Latency L0 <256ns, L1 <4us > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- > CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > Capabilities: [b4] Vendor Specific Information <?> > Kernel driver in use: nouveau > Kernel modules: nvidia, nouveau, nvidiafb > > > > [root@centos63 ~]# lsmod | grep nouveau > nouveau 791165 2 > ttm 82562 1 nouveau > drm_kms_helper 34122 1 nouveau > drm 250067 4 nouveau,ttm,drm_kms_helper > i2c_core 31276 14 > tuner_simple,tda9887,tda8290,wm8775,tuner,cx25840,pvrusb2,v4l2_common,videodev,tveeprom,i2c_piix4,nouveau,drm_kms_helper,drm > mxm_wmi 1925 1 nouveau > video 21032 1 nouveau > wmi 6287 2 nouveau,mxm_wmi > > > > > Notice that the nouveau VGA driver is loaded and is in use. Is Xen VGA > Passthrough 100% successful? I have successfully installed the NVIDIA > driver but I couldn't get it to load, so I reverted back to the > nouveau driver. > > I have such tough time getting Xen VGA Passthrough to work > successfully on Windows HVM domU that I am giving up on Xen VGA > Passthrough to Windows HVM domU!!! Windows 7 and Windows 8 HVM domU > device manager always report error code 43 with a yellow triangle. > Windows XP HVM domU device manager always report error code 10 with a > yellow circle. > ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful? 2012-10-27 15:35 ` Teo En Ming (Zhang Enming) @ 2012-10-27 15:40 ` Teo En Ming (Zhang Enming) 0 siblings, 0 replies; 3+ messages in thread From: Teo En Ming (Zhang Enming) @ 2012-10-27 15:40 UTC (permalink / raw) To: Teo En Ming (Zhang Enming) Cc: xen-users@lists.xen.org, xen-devel@lists.xen.org [-- Attachment #1: Type: text/plain, Size: 2200 bytes --] Attached CentOS 6.3 x86-64 HVM domU configuration file. -- Yours sincerely, Mr. Teo En Ming (Zhang Enming) Singapore On 10/27/2012 11:35 PM, Teo En Ming (Zhang Enming) wrote: > My CentOS 6.3 x86-64 HVM domU configuration: > > # This configuration file will only work with Xen 4.1.3-rc1-pre and NOT > # Xen 4.2-unstable due to the disk parameter. > # > # XL domain configuration file for Ubuntu 12.04 Precise Pangolin Beta > 1 amd64 HVM domU > # Please refer to "man xl.cfg" for further explanations. > # See also docs/misc/xl-network-configuration.markdown and > # docs/misc/xl-disk-configuration.txt > # Written by Teo En Ming (Zhang Enming) > # Email #1: teo.en.ming@gmail.com > # Email #2: teo-en-ming@teo-en-ming.com > # Mobile Phone: +65-8369-2618 > # Country: Singapore > # Date: 20 Mar 2012 Tue > name="CentOS" > builder="hvm" > vcpus=2 > memory=1024 > on_poweroff="destroy" > on_reboot="restart" > on_crash="destroy" > # Format compatible with Xen 4.2-unstable changeset 25070 only. > disk=[ 'format=raw, vdev=hda, access=rw, > target=/etc/xen/images/centos63.img', 'format=raw, vdev=hdc, > access=ro, devtype=cdrom, > target=/home/teo-en-ming/CentOS-6.3-x86_64-bin-DVD1.iso' ] > # Format compatible with Xen 4.1.3-rc1-pre only. > #disk=[ > 'file:/var/lib/libvirt/images/Ubuntu-12.04-beta1-amd64.img,hda,w', > 'file:/home/teo-en-ming/Downloads/ubuntu-12.04-beta1-dvd-amd64.iso,hdc:cdrom,r' > ] > vif=[ 'bridge=eth0,type=ioemu,model=e1000' ] > #boot=[c|d|n] > #Selects the emulated virtual device to boot from. Options are hard > disk (c), cd-rom (d) or network/PXE (n). > #Multiple options can be given and will be attempted in the order they > are given. e.g. to boot from cd-rom > #but fallback to the hard disk you can give dc. The default is cd. > #boot="dc" > boot="c" > acpi=1 > #xen_platform_pci=1 > #viridian=1 > stdvga=0 > vnc=1 > vnclisten="localhost" > vncdisplay=0 > vncunused=1 > vncpasswd="" > sdl=0 > usb=1 > usbdevice="tablet" > gfx_passthru=1 > # VGA Passthrough Gigabyte Geforce GTX 560 1 GB GDDR5 PCI Express x16 > VGA card. > pci = [ > '01:00.0','01:00.1','00:1b.0','00:1a.0','00:1a.1','00:1a.2','00:1a.7','00:1d.0','00:1d.1','00:1d.2','00:1d.7' > ] > [-- Attachment #2: centos --] [-- Type: text/plain, Size: 1841 bytes --] # This configuration file will only work with Xen 4.1.3-rc1-pre and NOT # Xen 4.2-unstable due to the disk parameter. # # XL domain configuration file for Ubuntu 12.04 Precise Pangolin Beta 1 amd64 HVM domU # Please refer to "man xl.cfg" for further explanations. # See also docs/misc/xl-network-configuration.markdown and # docs/misc/xl-disk-configuration.txt # Written by Teo En Ming (Zhang Enming) # Email #1: teo.en.ming@gmail.com # Email #2: teo-en-ming@teo-en-ming.com # Mobile Phone: +65-8369-2618 # Country: Singapore # Date: 20 Mar 2012 Tue name="CentOS" builder="hvm" vcpus=2 memory=1024 on_poweroff="destroy" on_reboot="restart" on_crash="destroy" # Format compatible with Xen 4.2-unstable changeset 25070 only. disk=[ 'format=raw, vdev=hda, access=rw, target=/etc/xen/images/centos63.img', 'format=raw, vdev=hdc, access=ro, devtype=cdrom, target=/home/teo-en-ming/CentOS-6.3-x86_64-bin-DVD1.iso' ] # Format compatible with Xen 4.1.3-rc1-pre only. #disk=[ 'file:/var/lib/libvirt/images/Ubuntu-12.04-beta1-amd64.img,hda,w', 'file:/home/teo-en-ming/Downloads/ubuntu-12.04-beta1-dvd-amd64.iso,hdc:cdrom,r' ] vif=[ 'bridge=eth0,type=ioemu,model=e1000' ] #boot=[c|d|n] #Selects the emulated virtual device to boot from. Options are hard disk (c), cd-rom (d) or network/PXE (n). #Multiple options can be given and will be attempted in the order they are given. e.g. to boot from cd-rom #but fallback to the hard disk you can give dc. The default is cd. #boot="dc" boot="c" acpi=1 #xen_platform_pci=1 #viridian=1 stdvga=0 vnc=1 vnclisten="localhost" vncdisplay=0 vncunused=1 vncpasswd="" sdl=0 usb=1 usbdevice="tablet" #gfx_passthru=1 # VGA Passthrough Gigabyte Geforce GTX 560 1 GB GDDR5 PCI Express x16 VGA card. #pci = [ '01:00.0','01:00.1','00:1b.0','00:1a.0','00:1a.1','00:1a.2','00:1a.7','00:1d.0','00:1d.1','00:1d.2','00:1d.7' ] [-- Attachment #3: Type: text/plain, Size: 126 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-10-27 15:40 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-10-27 14:59 Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful? Teo En Ming (Zhang Enming) 2012-10-27 15:35 ` Teo En Ming (Zhang Enming) 2012-10-27 15:40 ` Teo En Ming (Zhang Enming)
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).