* Re: vTPM setup problem on the emulator [not found] <36a97c6a.ff69.13c1e887f12.Coremail.gbtux@126.com> @ 2013-01-09 19:33 ` Matthew Fioravante 2013-01-10 2:17 ` Bei Guan 0 siblings, 1 reply; 7+ messages in thread From: Matthew Fioravante @ 2013-01-09 19:33 UTC (permalink / raw) To: xen-devel [-- Attachment #1.1.1: Type: text/plain, Size: 2758 bytes --] On 01/09/2013 03:58 AM, gavin wrote: > Hi, > > I tried to install the vTPM in Xen-4.1.0 + Dom0 kernel 2.6.18.8 + DomU > kernel 2.6.18.8. The device is TPM emulator. > However, I encountered several problems. > > 1. In DomU, I run "modprobe tpm_xenu" successfully. But it doesn't > creates the /dev/tpm0 device as our had expected. So, the trousers > cannot be started. An old thread in Xen mail-list can do > this,(http://old-list-archives.xen.org/xense-devel/2006-12/msg00002.html) > but it helps little to me. > Is there any problem with my vTPM front driver? The tpm related > modules and other info in DomU is list here. > *[root@gavin-pv ~]# lsmod | grep tpm* > tpm_xenu 15752 0 [permanent] > tpm 17952 1 tpm_xenu > tpm_bios 10112 1 tpm > *[root@gavin-pv ~]# tcsd -f* > TCSD TDDL ERROR: Could not find a device to open! Any relevant output in dmesg? Also does your domu config file have a vtpm device specified? > 2. In Dom0, I run "modprobe tpmd_dev" and "modprobe tpmbk" also > successfully and I can get the devices /dev/tpm, /dev/tpm0, and > /dev/vtpm. However, I cannot start the tpm emulator (# ./tpmd -f clear > pvm 1) and vtpm manager (# vtpm_managerd). The related info and output > error from Dom0 is also list here. So you want to use the TPM emulator on dom0 instead of a physical TPM? I see you listed /dev/tpm and /dev/tpm0. I believe the old manager is hard coded to use the second one. Is tpmd creating both? > *[root@localhost tpmd]# lsmod | grep tpm* > tpmd_dev 10416 0 > tpmbk 19516 0 [permanent] > *[root@localhost tpmd]# ./tpmd -f clear pvm 1* > VTPMD[0]: tpmd.c:766: Info: starting TPM Emulator daemon > VTPMD[0]: tpmd.c:369: Info: parsing options > VTPMD[1]: tpmd.c:478: Info: openening random device /dev/urandom > VTPMD[1]: tpmd.c:621: Info: staring main loop > Loading NVM. > Error in read_from_file:301 > VTPMD[1]: ../tpm/tpm_data.c:83: Info: initializing TPM data to default > values > VTPMD[1]: ../tpm/tpm_startup.c:30: Info: TPM_Init() > VTPMD[1]: ../tpm/tpm_testing.c:242: Info: TPM_SelfTestFull() > VTPMD[1]: ../tpm/tpm_testing.c:260: Info: Self-Test succeeded > VTPMD[1]: ../tpm/tpm_startup.c:44: Info: TPM_Startup(1) > VTPMD[1]: tpmd.c:661: Error: Failed to open devices to listen to guest. > > *[root@localhost vtpm]# vtpm_managerd* > INFO[VTPM]: Starting VTPM. > INFO[TCS]: Constructing new TCS: > ERROR[TXDATA]: TPM open failedERROR in VTPM_Init_Manager at > vtpm_manager.c:205 code: > TPM_IOERROR. > ERROR[VTPM]: Closing vtpmd due to error during startup. > > > Thanks in advance for your any reply. > > -- > Best Regards, > Gavin > > [-- Attachment #1.1.2: Type: text/html, Size: 5430 bytes --] [-- Attachment #1.2: S/MIME Cryptographic Signature --] [-- Type: application/pkcs7-signature, Size: 1459 bytes --] [-- Attachment #2: Type: text/plain, Size: 126 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: vTPM setup problem on the emulator 2013-01-09 19:33 ` vTPM setup problem on the emulator Matthew Fioravante @ 2013-01-10 2:17 ` Bei Guan 2013-01-10 15:51 ` Matthew Fioravante 0 siblings, 1 reply; 7+ messages in thread From: Bei Guan @ 2013-01-10 2:17 UTC (permalink / raw) To: Matthew Fioravante; +Cc: xen-users, xen-devel [-- Attachment #1.1: Type: text/plain, Size: 4517 bytes --] Hi Matthew, Thank you for your reply. 2013/1/10 Matthew Fioravante <matthew.fioravante@jhuapl.edu> > On 01/09/2013 03:58 AM, gavin wrote: > > Hi, > > I tried to install the vTPM in Xen-4.1.0 + Dom0 kernel 2.6.18.8 + DomU > kernel 2.6.18.8. The device is TPM emulator. > However, I encountered several problems. > > 1. In DomU, I run "modprobe tpm_xenu" successfully. But it doesn't creates > the /dev/tpm0 device as our had expected. So, the trousers cannot be > started. An old thread in Xen mail-list can do this,( > http://old-list-archives.xen.org/xense-devel/2006-12/msg00002.html) but > it helps little to me. > Is there any problem with my vTPM front driver? The tpm related modules > and other info in DomU is list here. > > *[root@gavin-pv ~]# lsmod | grep tpm* > tpm_xenu 15752 0 [permanent] > tpm 17952 1 tpm_xenu > tpm_bios 10112 1 tpm*[root@gavin-pv ~]# tcsd -f* > TCSD TDDL ERROR: Could not find a device to open! > > Any relevant output in dmesg? Also does your domu config file have a > vtpm device specified? > When I run "insmod tpm_xenu.ko" at the first time in DomU, there is no special message in dmesg except for this "xen_tpm_fr: Initialising the vTPM driver." Then, I reload the tpm_xenu module after removing it using "rmmod tpm_xenu.ko -f". I get the following message in dmesg. ... xen_tpm_fr: Initialising the vTPM driver. kobject_add failed for vtpm with -EEXIST, don't try to register things with the same name in the same directory. [<c01ea4ea>] kobject_add+0x11a/0x1a0 [<c01ea691>] kobject_register+0x21/0x50 [<c02400fd>] bus_add_driver+0x7d/0x140 [<c02856f9>] xenbus_register_driver_common+0x39/0x60 [<c0285740>] xenbus_register_frontend+0x20/0x40 [<e1227050>] tpmif_init+0x50/0x62 [tpm_xenu] [<c0143b08>] sys_init_module+0x148/0x1b40 [<c01187fc>] do_page_fault+0x10c/0xc6f [<c010845e>] do_syscall_trace+0x1ee/0x205 [<c01059bf>] syscall_call+0x7/0xb In the DomUconfig file, I use vtpm = ['backend=0']. But there is no vtpm device in Dom0 and DomU. See the following info. Dom0: [root@localhost fc8_new]# ls /sys/devices/xen-backend/ console-3-0 power uevent vbd-3-2049 vfb-3-0 vif-3-0 vkbd-3-0 DomU: [root@gavin-pv tpm]# ls /sys/devices/xen power uevent vbd-2049 vfb-0 vif-0 vkbd-0 > > 2. In Dom0, I run "modprobe tpmd_dev" and "modprobe tpmbk" also > successfully and I can get the devices /dev/tpm, /dev/tpm0, and /dev/vtpm. > However, I cannot start the tpm emulator (# ./tpmd -f clear pvm 1) and vtpm > manager (# vtpm_managerd). The related info and output error from Dom0 is > also list here. > > So you want to use the TPM emulator on dom0 instead of a physical TPM? > Yes, I try to use TPM emulator right now. In fact, there is a physical TPM chip in my laptop. But I'm not sure how to make it work in fedora8. So, when the vTPM works well on emulator, I will try to abandon the emulator and use the physical TPM. > > I see you listed /dev/tpm and /dev/tpm0. I believe the old manager is hard > coded to use the second one. Is tpmd creating both? > Yes. When modprobe the tpmd_dev module, these two devices are created. Thanks again. > > > *[root@localhost tpmd]# lsmod | grep tpm* > tpmd_dev 10416 0 > tpmbk 19516 0 [permanent] > > *[root@localhost tpmd]# ./tpmd -f clear pvm 1* > VTPMD[0]: tpmd.c:766: Info: starting TPM Emulator daemon > VTPMD[0]: tpmd.c:369: Info: parsing options > VTPMD[1]: tpmd.c:478: Info: openening random device /dev/urandom > VTPMD[1]: tpmd.c:621: Info: staring main loop > Loading NVM. > Error in read_from_file:301 > VTPMD[1]: ../tpm/tpm_data.c:83: Info: initializing TPM data to default > values > VTPMD[1]: ../tpm/tpm_startup.c:30: Info: TPM_Init() > VTPMD[1]: ../tpm/tpm_testing.c:242: Info: TPM_SelfTestFull() > VTPMD[1]: ../tpm/tpm_testing.c:260: Info: Self-Test succeeded > VTPMD[1]: ../tpm/tpm_startup.c:44: Info: TPM_Startup(1) > VTPMD[1]: tpmd.c:661: Error: Failed to open devices to listen to guest. > > > > > *[root@localhost vtpm]# vtpm_managerd* > INFO[VTPM]: Starting VTPM. > INFO[TCS]: Constructing new TCS: > ERROR[TXDATA]: TPM open failedERROR in VTPM_Init_Manager at > vtpm_manager.c:205 code: > TPM_IOERROR. > ERROR[VTPM]: Closing vtpmd due to error during startup. > > > Thanks in advance for your any reply. > > -- > Best Regards, > Gavin > > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xen.org > http://lists.xen.org/xen-devel > > [-- Attachment #1.2: Type: text/html, Size: 8080 bytes --] [-- Attachment #2: Type: text/plain, Size: 126 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: vTPM setup problem on the emulator 2013-01-10 2:17 ` Bei Guan @ 2013-01-10 15:51 ` Matthew Fioravante 2013-01-11 3:11 ` Bei Guan 0 siblings, 1 reply; 7+ messages in thread From: Matthew Fioravante @ 2013-01-10 15:51 UTC (permalink / raw) To: Bei Guan; +Cc: xen-users@lists.xen.org, xen-devel [-- Attachment #1.1.1: Type: text/plain, Size: 6314 bytes --] On 01/09/2013 09:17 PM, Bei Guan wrote: > Hi Matthew, > > Thank you for your reply. > > > > 2013/1/10 Matthew Fioravante <matthew.fioravante@jhuapl.edu > <mailto:matthew.fioravante@jhuapl.edu>> > > On 01/09/2013 03:58 AM, gavin wrote: >> Hi, >> >> I tried to install the vTPM in Xen-4.1.0 + Dom0 kernel 2.6.18.8 + >> DomU kernel 2.6.18.8. The device is TPM emulator. >> However, I encountered several problems. >> >> 1. In DomU, I run "modprobe tpm_xenu" successfully. But it >> doesn't creates the /dev/tpm0 device as our had expected. So, the >> trousers cannot be started. An old thread in Xen mail-list can do >> this,(http://old-list-archives.xen.org/xense-devel/2006-12/msg00002.html) >> but it helps little to me. >> Is there any problem with my vTPM front driver? The tpm related >> modules and other info in DomU is list here. >> *[root@gavin-pv ~]# lsmod | grep tpm* >> tpm_xenu 15752 0 [permanent] >> tpm 17952 1 tpm_xenu >> tpm_bios 10112 1 tpm >> *[root@gavin-pv ~]# tcsd -f* >> TCSD TDDL ERROR: Could not find a device to open! > Any relevant output in dmesg? Also does your domu config file have > a vtpm device specified? > > > When I run "insmod tpm_xenu.ko" at the first time in DomU, there is > no special message in dmesg except for this "xen_tpm_fr: Initialising > the vTPM driver." > Then, I reload the tpm_xenu module after removing it using "rmmod > tpm_xenu.ko -f". I get the following message in dmesg. > ... > xen_tpm_fr: Initialising the vTPM driver. > kobject_add failed for vtpm with -EEXIST, don't try to register things > with the same > name in the same directory. > [<c01ea4ea>] kobject_add+0x11a/0x1a0 > [<c01ea691>] kobject_register+0x21/0x50 > [<c02400fd>] bus_add_driver+0x7d/0x140 > [<c02856f9>] xenbus_register_driver_common+0x39/0x60 > [<c0285740>] xenbus_register_frontend+0x20/0x40 > [<e1227050>] tpmif_init+0x50/0x62 [tpm_xenu] > [<c0143b08>] sys_init_module+0x148/0x1b40 > [<c01187fc>] do_page_fault+0x10c/0xc6f > [<c010845e>] do_syscall_trace+0x1ee/0x205 > [<c01059bf>] syscall_call+0x7/0xb > > In the DomUconfig file, I use vtpm = ['backend=0']. > But there is no vtpm device in Dom0 and DomU. See the following info. The domU is PVM correct? You can also try just compiling in tpm_xenu instead of using it as a module. > > Dom0: > [root@localhost fc8_new]# ls /sys/devices/xen-backend/ > console-3-0 power uevent vbd-3-2049 vfb-3-0 vif-3-0 vkbd-3-0 > > DomU: > [root@gavin-pv tpm]# ls /sys/devices/xen > power uevent vbd-2049 vfb-0 vif-0 vkbd-0 > > >> 2. In Dom0, I run "modprobe tpmd_dev" and "modprobe tpmbk" also >> successfully and I can get the devices /dev/tpm, /dev/tpm0, and >> /dev/vtpm. However, I cannot start the tpm emulator (# ./tpmd -f >> clear pvm 1) and vtpm manager (# vtpm_managerd). The related info >> and output error from Dom0 is also list here. > So you want to use the TPM emulator on dom0 instead of a physical > TPM? > > Yes, I try to use TPM emulator right now. > In fact, there is a physical TPM chip in my laptop. But I'm not sure > how to make it work in fedora8. So, when the vTPM works well on > emulator, I will try to abandon the emulator and use the physical TPM. In that case you might want to make sure the TPM is disabled in the BIOS if you want to use the emulator. Your dom0 kernel might have tpm drivers built in which could cause a possible conflict with the emulator. Using the tpm emulator in dom0 has its own collection of issues. You might want to get the physical tpm working first and then play with vtpms. We used TPM successfully on Fedora 8. Try this: Reboot your machine and get into the bios. Clear the TPM and then activiate it. You might not have that option to clear if its disabled, in that case just activiate it. In fedora install trousers and tpm_tools. Start tcsd and try tpm_version or some other command to ensure your TPM is working. If not, make sure all of the TPM drivers are either compiled into the kernel or loaded as modules. > > > I see you listed /dev/tpm and /dev/tpm0. I believe the old manager > is hard coded to use the second one. Is tpmd creating both? > > Yes. When modprobe the tpmd_dev module, these two devices are created. > > > Thanks again. > > > >> *[root@localhost tpmd]# lsmod | grep tpm* >> tpmd_dev 10416 0 >> tpmbk 19516 0 [permanent] >> *[root@localhost tpmd]# ./tpmd -f clear pvm 1* >> VTPMD[0]: tpmd.c:766: Info: starting TPM Emulator daemon >> VTPMD[0]: tpmd.c:369: Info: parsing options >> VTPMD[1]: tpmd.c:478: Info: openening random device /dev/urandom >> VTPMD[1]: tpmd.c:621: Info: staring main loop >> Loading NVM. >> Error in read_from_file:301 >> VTPMD[1]: ../tpm/tpm_data.c:83: Info: initializing TPM data to >> default values >> VTPMD[1]: ../tpm/tpm_startup.c:30: Info: TPM_Init() >> VTPMD[1]: ../tpm/tpm_testing.c:242: Info: TPM_SelfTestFull() >> VTPMD[1]: ../tpm/tpm_testing.c:260: Info: Self-Test succeeded >> VTPMD[1]: ../tpm/tpm_startup.c:44: Info: TPM_Startup(1) >> VTPMD[1]: tpmd.c:661: Error: Failed to open devices to listen to >> guest. > > >> >> *[root@localhost vtpm]# vtpm_managerd* >> INFO[VTPM]: Starting VTPM. >> INFO[TCS]: Constructing new TCS: >> ERROR[TXDATA]: TPM open failedERROR in VTPM_Init_Manager at >> vtpm_manager.c:205 code: >> TPM_IOERROR. >> ERROR[VTPM]: Closing vtpmd due to error during startup. >> >> >> Thanks in advance for your any reply. >> >> -- >> Best Regards, >> Gavin >> >> > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xen.org <mailto:Xen-devel@lists.xen.org> > http://lists.xen.org/xen-devel > > > Keep in mind that the old vTPM system is deprecated and I can only provide limited support. If you can't get it to work I would suggest pulling the latest xen-unstable and my latest patch set on here and trying to use that. [-- Attachment #1.1.2: Type: text/html, Size: 13923 bytes --] [-- Attachment #1.2: S/MIME Cryptographic Signature --] [-- Type: application/pkcs7-signature, Size: 1459 bytes --] [-- Attachment #2: Type: text/plain, Size: 126 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: vTPM setup problem on the emulator 2013-01-10 15:51 ` Matthew Fioravante @ 2013-01-11 3:11 ` Bei Guan 2013-01-14 21:11 ` Matthew Fioravante 0 siblings, 1 reply; 7+ messages in thread From: Bei Guan @ 2013-01-11 3:11 UTC (permalink / raw) To: Matthew Fioravante; +Cc: xen-users@lists.xen.org, xen-devel [-- Attachment #1.1: Type: text/plain, Size: 7917 bytes --] 2013/1/10 Matthew Fioravante <matthew.fioravante@jhuapl.edu> > On 01/09/2013 09:17 PM, Bei Guan wrote: > > Hi Matthew, > > Thank you for your reply. > > > > 2013/1/10 Matthew Fioravante <matthew.fioravante@jhuapl.edu> > >> On 01/09/2013 03:58 AM, gavin wrote: >> >> Hi, >> >> I tried to install the vTPM in Xen-4.1.0 + Dom0 kernel 2.6.18.8 + DomU >> kernel 2.6.18.8. The device is TPM emulator. >> However, I encountered several problems. >> >> 1. In DomU, I run "modprobe tpm_xenu" successfully. But it doesn't >> creates the /dev/tpm0 device as our had expected. So, the trousers cannot >> be started. An old thread in Xen mail-list can do this,( >> http://old-list-archives.xen.org/xense-devel/2006-12/msg00002.html) but >> it helps little to me. >> Is there any problem with my vTPM front driver? The tpm related modules >> and other info in DomU is list here. >> >> *[root@gavin-pv ~]# lsmod | grep tpm* >> tpm_xenu 15752 0 [permanent] >> tpm 17952 1 tpm_xenu >> tpm_bios 10112 1 tpm*[root@gavin-pv ~]# tcsd -f* >> TCSD TDDL ERROR: Could not find a device to open! >> >> Any relevant output in dmesg? Also does your domu config file have a >> vtpm device specified? >> > > When I run "insmod tpm_xenu.ko" at the first time in DomU, there is > no special message in dmesg except for this "xen_tpm_fr: Initialising the > vTPM driver." > Then, I reload the tpm_xenu module after removing it using "rmmod > tpm_xenu.ko -f". I get the following message in dmesg. > ... > xen_tpm_fr: Initialising the vTPM driver. > kobject_add failed for vtpm with -EEXIST, don't try to register things > with the same > name in the same directory. > [<c01ea4ea>] kobject_add+0x11a/0x1a0 > [<c01ea691>] kobject_register+0x21/0x50 > [<c02400fd>] bus_add_driver+0x7d/0x140 > [<c02856f9>] xenbus_register_driver_common+0x39/0x60 > [<c0285740>] xenbus_register_frontend+0x20/0x40 > [<e1227050>] tpmif_init+0x50/0x62 [tpm_xenu] > [<c0143b08>] sys_init_module+0x148/0x1b40 > [<c01187fc>] do_page_fault+0x10c/0xc6f > [<c010845e>] do_syscall_trace+0x1ee/0x205 > [<c01059bf>] syscall_call+0x7/0xb > > In the DomUconfig file, I use vtpm = ['backend=0']. > But there is no vtpm device in Dom0 and DomU. See the following info. > > The domU is PVM correct? You can also try just compiling in tpm_xenu > instead of using it as a module. > Yes, it's DomU. Now, I try vTPM in Xen-4.0.2, Dom0 and DomU are still with kernel 2.6.18.8. I can get the device /dev/tpm0 in DomU after modprobe tpm_xenu. (Perhaps this problem has something to do with the hardware and the Xen version) However, When I run tcsd in DomU, there is an error: *root@ubuntu:~/vtpm/trousers-0.3.4/src/tcsd# tcsd -f* TCSD resetting mode of /usr/local/var/lib/tpm from 40755 to: 700 TCSD TDDL ioctl: (25) Inappropriate ioctl for device TCSD TDDL Falling back to Read/Write device support. TCSD TCS ERROR: TCS GetCapability failed with result = 0x9 Is this because vtpm_managerd is not running in Dom0 or physical TPM does not work well in Dom0? > > > Dom0: > [root@localhost fc8_new]# ls /sys/devices/xen-backend/ > console-3-0 power uevent vbd-3-2049 vfb-3-0 vif-3-0 vkbd-3-0 > > DomU: > [root@gavin-pv tpm]# ls /sys/devices/xen > power uevent vbd-2049 vfb-0 vif-0 vkbd-0 > > > >> >> 2. In Dom0, I run "modprobe tpmd_dev" and "modprobe tpmbk" also >> successfully and I can get the devices /dev/tpm, /dev/tpm0, and /dev/vtpm. >> However, I cannot start the tpm emulator (# ./tpmd -f clear pvm 1) and vtpm >> manager (# vtpm_managerd). The related info and output error from Dom0 is >> also list here. >> >> So you want to use the TPM emulator on dom0 instead of a physical TPM? >> > Yes, I try to use TPM emulator right now. > In fact, there is a physical TPM chip in my laptop. But I'm not sure how > to make it work in fedora8. So, when the vTPM works well on emulator, I > will try to abandon the emulator and use the physical TPM. > > In that case you might want to make sure the TPM is disabled in the BIOS > if you want to use the emulator. Your dom0 kernel might have tpm drivers > built in which could cause a possible conflict with the emulator. > > Using the tpm emulator in dom0 has its own collection of issues. You might > want to get the physical tpm working first and then play with vtpms. We > used TPM successfully on Fedora 8. > > Try this: > Reboot your machine and get into the bios. Clear the TPM and then > activiate it. You might not have that option to clear if its disabled, in > that case just activiate it. In fedora install trousers and tpm_tools. > Start tcsd and try tpm_version or some other command to ensure your TPM is > working. If not, make sure all of the TPM drivers are either compiled into > the kernel or loaded as modules. > Now, I try to use physical TPM directly instead of an emulator. I try to make the physical TPM work firstly. I did what you suggested above, but I still encountered some problems. The TPM relevant modules in Dom0 are loaded like this. modprobe tpm_bios modprobe tpm modprobe tpm_tis force=1 Then, I got the /dev/tpm0. However, I cannot start tcsd and vtpm_managerd in Dom0. The output is as the following. *[root@localhost Xen]# tcsd -f* TCSD TDDL ioctl: (25) Inappropriate ioctl for device TCSD TDDL Falling back to Read/Write device support. TCSD TDDL ERROR: read from device /dev/tpm0 failed: Input/output error TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087 *[root@localhost vtpm_manager]# vtpm_managerd* INFO[VTPM]: Starting VTPM. INFO[TCS]: Constructing new TCS: INFO[TCS]: Calling TCS_OpenContext: ERROR[TXDATA]: read() failed*** ERRORDIE in TDDL_TransmitData at transmit.c: 89 ERROR in VTPM_Init_Manager at vtpm_manager.c:215 code: TPM_FAIL. ERROR[VTPM]: Closing vtpmd due to error during startup. I searched in google for a while, but I still cannot resolve it. Do you have any suggestions on these problems? Thanks in advance. > > > > >> >> I see you listed /dev/tpm and /dev/tpm0. I believe the old manager is >> hard coded to use the second one. Is tpmd creating both? >> > Yes. When modprobe the tpmd_dev module, these two devices are created. > > > Thanks again. > > > >> >> >> *[root@localhost tpmd]# lsmod | grep tpm* >> tpmd_dev 10416 0 >> tpmbk 19516 0 [permanent] >> >> *[root@localhost tpmd]# ./tpmd -f clear pvm 1* >> VTPMD[0]: tpmd.c:766: Info: starting TPM Emulator daemon >> VTPMD[0]: tpmd.c:369: Info: parsing options >> VTPMD[1]: tpmd.c:478: Info: openening random device /dev/urandom >> VTPMD[1]: tpmd.c:621: Info: staring main loop >> Loading NVM. >> Error in read_from_file:301 >> VTPMD[1]: ../tpm/tpm_data.c:83: Info: initializing TPM data to default >> values >> VTPMD[1]: ../tpm/tpm_startup.c:30: Info: TPM_Init() >> VTPMD[1]: ../tpm/tpm_testing.c:242: Info: TPM_SelfTestFull() >> VTPMD[1]: ../tpm/tpm_testing.c:260: Info: Self-Test succeeded >> VTPMD[1]: ../tpm/tpm_startup.c:44: Info: TPM_Startup(1) >> VTPMD[1]: tpmd.c:661: Error: Failed to open devices to listen to guest. >> >> >> >> >> *[root@localhost vtpm]# vtpm_managerd* >> INFO[VTPM]: Starting VTPM. >> INFO[TCS]: Constructing new TCS: >> ERROR[TXDATA]: TPM open failedERROR in VTPM_Init_Manager at >> vtpm_manager.c:205 code: >> TPM_IOERROR. >> ERROR[VTPM]: Closing vtpmd due to error during startup. >> >> >> Thanks in advance for your any reply. >> >> -- >> Best Regards, >> Gavin >> >> >> >> >> _______________________________________________ >> Xen-devel mailing list >> Xen-devel@lists.xen.org >> http://lists.xen.org/xen-devel >> >> > > > Keep in mind that the old vTPM system is deprecated and I can only provide > limited support. If you can't get it to work I would suggest pulling the > latest xen-unstable and my latest patch set on here and trying to use that. > Well, it's very nice. I think maybe I need to try it later. -- Best Regards, Gavin [-- Attachment #1.2: Type: text/html, Size: 16407 bytes --] [-- Attachment #2: Type: text/plain, Size: 126 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: vTPM setup problem on the emulator 2013-01-11 3:11 ` Bei Guan @ 2013-01-14 21:11 ` Matthew Fioravante 2013-01-16 17:45 ` Bei Guan 0 siblings, 1 reply; 7+ messages in thread From: Matthew Fioravante @ 2013-01-14 21:11 UTC (permalink / raw) To: Bei Guan; +Cc: xen-users@lists.xen.org, xen-devel [-- Attachment #1.1.1: Type: text/plain, Size: 9758 bytes --] On 01/10/2013 10:11 PM, Bei Guan wrote: > > > 2013/1/10 Matthew Fioravante <matthew.fioravante@jhuapl.edu > <mailto:matthew.fioravante@jhuapl.edu>> > > On 01/09/2013 09:17 PM, Bei Guan wrote: >> Hi Matthew, >> >> Thank you for your reply. >> >> >> >> 2013/1/10 Matthew Fioravante <matthew.fioravante@jhuapl.edu >> <mailto:matthew.fioravante@jhuapl.edu>> >> >> On 01/09/2013 03:58 AM, gavin wrote: >>> Hi, >>> >>> I tried to install the vTPM in Xen-4.1.0 + Dom0 kernel >>> 2.6.18.8 + DomU kernel 2.6.18.8. The device is TPM emulator. >>> However, I encountered several problems. >>> >>> 1. In DomU, I run "modprobe tpm_xenu" successfully. But it >>> doesn't creates the /dev/tpm0 device as our had expected. >>> So, the trousers cannot be started. An old thread in Xen >>> mail-list can do >>> this,(http://old-list-archives.xen.org/xense-devel/2006-12/msg00002.html) >>> but it helps little to me. >>> Is there any problem with my vTPM front driver? The tpm >>> related modules and other info in DomU is list here. >>> *[root@gavin-pv ~]# lsmod | grep tpm* >>> tpm_xenu 15752 0 [permanent] >>> tpm 17952 1 tpm_xenu >>> tpm_bios 10112 1 tpm >>> *[root@gavin-pv ~]# tcsd -f* >>> TCSD TDDL ERROR: Could not find a device to open! >> Any relevant output in dmesg? Also does your domu config file >> have a vtpm device specified? >> >> >> When I run "insmod tpm_xenu.ko" at the first time in DomU, there >> is no special message in dmesg except for this "xen_tpm_fr: >> Initialising the vTPM driver." >> Then, I reload the tpm_xenu module after removing it using "rmmod >> tpm_xenu.ko -f". I get the following message in dmesg. >> ... >> xen_tpm_fr: Initialising the vTPM driver. >> kobject_add failed for vtpm with -EEXIST, don't try to register >> things with the same >> name in the same directory. >> [<c01ea4ea>] kobject_add+0x11a/0x1a0 >> [<c01ea691>] kobject_register+0x21/0x50 >> [<c02400fd>] bus_add_driver+0x7d/0x140 >> [<c02856f9>] xenbus_register_driver_common+0x39/0x60 >> [<c0285740>] xenbus_register_frontend+0x20/0x40 >> [<e1227050>] tpmif_init+0x50/0x62 [tpm_xenu] >> [<c0143b08>] sys_init_module+0x148/0x1b40 >> [<c01187fc>] do_page_fault+0x10c/0xc6f >> [<c010845e>] do_syscall_trace+0x1ee/0x205 >> [<c01059bf>] syscall_call+0x7/0xb >> >> In the DomUconfig file, I use vtpm = ['backend=0']. >> But there is no vtpm device in Dom0 and DomU. See the following info. > The domU is PVM correct? You can also try just compiling in > tpm_xenu instead of using it as a module. > > Yes, it's DomU. > Now, I try vTPM in Xen-4.0.2, Dom0 and DomU are still with kernel > 2.6.18.8. I can get the device /dev/tpm0 in DomU after modprobe tpm_xenu. > (Perhaps this problem has something to do with the hardware and the > Xen version) > > However, When I run tcsd in DomU, there is an error: > *root@ubuntu:~/vtpm/trousers-0.3.4/src/tcsd# tcsd -f* > TCSD resetting mode of /usr/local/var/lib/tpm from 40755 to: 700 > TCSD TDDL ioctl: (25) Inappropriate ioctl for device > TCSD TDDL Falling back to Read/Write device support. > TCSD TCS ERROR: TCS GetCapability failed with result = 0x9 > > Is this because vtpm_managerd is not running in Dom0 or physical TPM > does not work well in Dom0? > What does the output of the vtpm say? You have to have the manager running before you start the domU otherwise it wont work. > > >> >> Dom0: >> [root@localhost fc8_new]# ls /sys/devices/xen-backend/ >> console-3-0 power uevent vbd-3-2049 vfb-3-0 vif-3-0 vkbd-3-0 >> >> DomU: >> [root@gavin-pv tpm]# ls /sys/devices/xen >> power uevent vbd-2049 vfb-0 vif-0 vkbd-0 >> >> >>> 2. In Dom0, I run "modprobe tpmd_dev" and "modprobe tpmbk" >>> also successfully and I can get the devices /dev/tpm, >>> /dev/tpm0, and /dev/vtpm. However, I cannot start the tpm >>> emulator (# ./tpmd -f clear pvm 1) and vtpm manager (# >>> vtpm_managerd). The related info and output error from Dom0 >>> is also list here. >> So you want to use the TPM emulator on dom0 instead of a >> physical TPM? >> >> Yes, I try to use TPM emulator right now. >> In fact, there is a physical TPM chip in my laptop. But I'm not >> sure how to make it work in fedora8. So, when the vTPM works well >> on emulator, I will try to abandon the emulator and use the >> physical TPM. > In that case you might want to make sure the TPM is disabled in > the BIOS if you want to use the emulator. Your dom0 kernel might > have tpm drivers built in which could cause a possible conflict > with the emulator. > > Using the tpm emulator in dom0 has its own collection of issues. > You might want to get the physical tpm working first and then play > with vtpms. We used TPM successfully on Fedora 8. > > Try this: > Reboot your machine and get into the bios. Clear the TPM and then > activiate it. You might not have that option to clear if its > disabled, in that case just activiate it. In fedora install > trousers and tpm_tools. Start tcsd and try tpm_version or some > other command to ensure your TPM is working. If not, make sure all > of the TPM drivers are either compiled into the kernel or loaded > as modules. > > Now, I try to use physical TPM directly instead of an emulator. I try > to make the physical TPM work firstly. I did what you suggested above, > but I still encountered some problems. > The TPM relevant modules in Dom0 are loaded like this. > > modprobe tpm_bios > modprobe tpm > modprobe tpm_tis force=1 > > Then, I got the /dev/tpm0. > However, I cannot start tcsd and vtpm_managerd in Dom0. The output is > as the following. > > *[root@localhost Xen]# tcsd -f* > TCSD TDDL ioctl: (25) Inappropriate ioctl for device > TCSD TDDL Falling back to Read/Write device support. > TCSD TDDL ERROR: read from device /dev/tpm0 failed: Input/output error > TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087 > > *[root@localhost vtpm_manager]# vtpm_managerd* > INFO[VTPM]: Starting VTPM. > INFO[TCS]: Constructing new TCS: > INFO[TCS]: Calling TCS_OpenContext: > ERROR[TXDATA]: read() failed*** ERRORDIE in TDDL_TransmitData at > transmit.c: 89 > ERROR in VTPM_Init_Manager at vtpm_manager.c:215 code: TPM_FAIL. > ERROR[VTPM]: Closing vtpmd due to error during startup. > > > I searched in google for a while, but I still cannot resolve it. > Do you have any suggestions on these problems? Thanks in advance. You can't run tcsd and vtpm manager at the same time. Only use tcsd to test if your tpm if working and then kill the process and disable it from starting on boot (chkconfig tcsd off). Make sure tcsd is not already running in the background before you try running it yourself (ps -ef | grep tcsd). If you try 2 instances of tcsd it will fail. > > >> >> >> I see you listed /dev/tpm and /dev/tpm0. I believe the old >> manager is hard coded to use the second one. Is tpmd creating >> both? >> >> Yes. When modprobe the tpmd_dev module, these two devices are >> created. >> >> >> Thanks again. >> >> >> >>> *[root@localhost tpmd]# lsmod | grep tpm* >>> tpmd_dev 10416 0 >>> tpmbk 19516 0 [permanent] >>> *[root@localhost tpmd]# ./tpmd -f clear pvm 1* >>> VTPMD[0]: tpmd.c:766: Info: starting TPM Emulator daemon >>> VTPMD[0]: tpmd.c:369: Info: parsing options >>> VTPMD[1]: tpmd.c:478: Info: openening random device /dev/urandom >>> VTPMD[1]: tpmd.c:621: Info: staring main loop >>> Loading NVM. >>> Error in read_from_file:301 >>> VTPMD[1]: ../tpm/tpm_data.c:83: Info: initializing TPM data >>> to default values >>> VTPMD[1]: ../tpm/tpm_startup.c:30: Info: TPM_Init() >>> VTPMD[1]: ../tpm/tpm_testing.c:242: Info: TPM_SelfTestFull() >>> VTPMD[1]: ../tpm/tpm_testing.c:260: Info: Self-Test succeeded >>> VTPMD[1]: ../tpm/tpm_startup.c:44: Info: TPM_Startup(1) >>> VTPMD[1]: tpmd.c:661: Error: Failed to open devices to >>> listen to guest. >> >> >>> >>> *[root@localhost vtpm]# vtpm_managerd* >>> INFO[VTPM]: Starting VTPM. >>> INFO[TCS]: Constructing new TCS: >>> ERROR[TXDATA]: TPM open failedERROR in VTPM_Init_Manager at >>> vtpm_manager.c:205 code: >>> TPM_IOERROR. >>> ERROR[VTPM]: Closing vtpmd due to error during startup. >>> >>> >>> Thanks in advance for your any reply. >>> >>> -- >>> Best Regards, >>> Gavin >>> >>> >> >> >> _______________________________________________ >> Xen-devel mailing list >> Xen-devel@lists.xen.org <mailto:Xen-devel@lists.xen.org> >> http://lists.xen.org/xen-devel >> >> >> > > Keep in mind that the old vTPM system is deprecated and I can only > provide limited support. If you can't get it to work I would > suggest pulling the latest xen-unstable and my latest patch set on > here and trying to use that. > > Well, it's very nice. I think maybe I need to try it later. > > > > -- > Best Regards, > Gavin > [-- Attachment #1.1.2: Type: text/html, Size: 23998 bytes --] [-- Attachment #1.2: S/MIME Cryptographic Signature --] [-- Type: application/pkcs7-signature, Size: 1459 bytes --] [-- Attachment #2: Type: text/plain, Size: 126 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: vTPM setup problem on the emulator 2013-01-14 21:11 ` Matthew Fioravante @ 2013-01-16 17:45 ` Bei Guan 0 siblings, 0 replies; 7+ messages in thread From: Bei Guan @ 2013-01-16 17:45 UTC (permalink / raw) To: Matthew Fioravante; +Cc: xen-users@lists.xen.org, xen-devel [-- Attachment #1.1: Type: text/plain, Size: 23579 bytes --] 2013/1/15 Matthew Fioravante <matthew.fioravante@jhuapl.edu> > On 01/10/2013 10:11 PM, Bei Guan wrote: > > > > 2013/1/10 Matthew Fioravante <matthew.fioravante@jhuapl.edu> > >> On 01/09/2013 09:17 PM, Bei Guan wrote: >> >> Hi Matthew, >> >> Thank you for your reply. >> >> >> >> 2013/1/10 Matthew Fioravante <matthew.fioravante@jhuapl.edu> >> >>> On 01/09/2013 03:58 AM, gavin wrote: >>> >>> Hi, >>> >>> I tried to install the vTPM in Xen-4.1.0 + Dom0 kernel 2.6.18.8 + DomU >>> kernel 2.6.18.8. The device is TPM emulator. >>> However, I encountered several problems. >>> >>> 1. In DomU, I run "modprobe tpm_xenu" successfully. But it doesn't >>> creates the /dev/tpm0 device as our had expected. So, the trousers cannot >>> be started. An old thread in Xen mail-list can do this,( >>> http://old-list-archives.xen.org/xense-devel/2006-12/msg00002.html) but >>> it helps little to me. >>> Is there any problem with my vTPM front driver? The tpm related modules >>> and other info in DomU is list here. >>> >>> *[root@gavin-pv ~]# lsmod | grep tpm* >>> tpm_xenu 15752 0 [permanent] >>> tpm 17952 1 tpm_xenu >>> tpm_bios 10112 1 tpm*[root@gavin-pv ~]# tcsd -f* >>> TCSD TDDL ERROR: Could not find a device to open! >>> >>> Any relevant output in dmesg? Also does your domu config file have a >>> vtpm device specified? >>> >> >> When I run "insmod tpm_xenu.ko" at the first time in DomU, there is >> no special message in dmesg except for this "xen_tpm_fr: Initialising the >> vTPM driver." >> Then, I reload the tpm_xenu module after removing it using "rmmod >> tpm_xenu.ko -f". I get the following message in dmesg. >> ... >> xen_tpm_fr: Initialising the vTPM driver. >> kobject_add failed for vtpm with -EEXIST, don't try to register things >> with the same >> name in the same directory. >> [<c01ea4ea>] kobject_add+0x11a/0x1a0 >> [<c01ea691>] kobject_register+0x21/0x50 >> [<c02400fd>] bus_add_driver+0x7d/0x140 >> [<c02856f9>] xenbus_register_driver_common+0x39/0x60 >> [<c0285740>] xenbus_register_frontend+0x20/0x40 >> [<e1227050>] tpmif_init+0x50/0x62 [tpm_xenu] >> [<c0143b08>] sys_init_module+0x148/0x1b40 >> [<c01187fc>] do_page_fault+0x10c/0xc6f >> [<c010845e>] do_syscall_trace+0x1ee/0x205 >> [<c01059bf>] syscall_call+0x7/0xb >> >> In the DomUconfig file, I use vtpm = ['backend=0']. >> But there is no vtpm device in Dom0 and DomU. See the following info. >> >> The domU is PVM correct? You can also try just compiling in tpm_xenu >> instead of using it as a module. >> > Yes, it's DomU. > Now, I try vTPM in Xen-4.0.2, Dom0 and DomU are still with kernel > 2.6.18.8. I can get the device /dev/tpm0 in DomU after modprobe tpm_xenu. > (Perhaps this problem has something to do with the hardware and the Xen > version) > > However, When I run tcsd in DomU, there is an error: > *root@ubuntu:~/vtpm/trousers-0.3.4/src/tcsd# tcsd -f* > TCSD resetting mode of /usr/local/var/lib/tpm from 40755 to: 700 > TCSD TDDL ioctl: (25) Inappropriate ioctl for device > TCSD TDDL Falling back to Read/Write device support. > TCSD TCS ERROR: TCS GetCapability failed with result = 0x9 > > > Is this because vtpm_managerd is not running in Dom0 or physical TPM > does not work well in Dom0? > > What does the output of the vtpm say? You have to have the manager > running before you start the domU otherwise it wont work. > Hi Matthew, I don't think vtpm_managerd in Xen-4.0.2 can start on the tpm emulator. Because there's no code in the vtpmd (and its patch vtpm-0.5.1.patch) to create a fifo (#define TPM_TX_FNAME "/var/tpm/tpm_in.fifo") that needs to be shared by vtpm_managerd (tcs/transmit.c) However, can I use the vtpmd code from Xen-3.4.4 in Xen-4.0.2? That version of vtpmd can create the fifo needed by vtpm_managerd. I tried to use that version of vtpmd in Xen-4.0.2. It seems tpm_emulator works well, but vtpm_managerd still cannot start to run. The output is as following. I think maybe it needs to change something in the code of vtpm_managerd. [root@localhost tools]*# vtpm_managerd * INFO[VTPM]: Starting VTPM. INFO[TCS]: Constructing new TCS: INFO[TCS]: INFO[TCS]: Calling TCS_OpenContext: INFO[VTSP]: OIAP. INFO[VTSP]: Loading Key into TPM. ERROR[TCS]: TCSP_LoadKeyByBlob Failed with return code TPM_INVALID_KEYHANDLE ERROR in VTSP_LoadKey at vtsp.c:634 code: TPM_INVALID_KEYHANDLE. ERROR in VTPM_LoadManagerData at securestorage.c:453 code: TPM_INVALID_KEYHANDLE. ERROR[VTPM]: Failed to load service data with error = TPM_INVALID_KEYHANDLE ERROR[VTPM]: Failed to read existing manager file [root@localhost vtpm]*# tpm_emulator clear* Initializing tpm: clear TPMD: tpm/tpm_cmd_handler.c:4137: Debug: tpm_emulator_init() TPMD: tpm/tpm_startup.c:30: Info: TPM_Init() TPMD: tpm/tpm_testing.c:242: Info: TPM_SelfTestFull() TPMD: tpm/tpm_testing.c:42: Debug: tpm_test_prng() TPMD: tpm/tpm_testing.c:70: Debug: Monobit: 9995 TPMD: tpm/tpm_testing.c:71: Debug: Poker: 9.7 TPMD: tpm/tpm_testing.c:72: Debug: run_1: 2507, 2481 TPMD: tpm/tpm_testing.c:73: Debug: run_2: 1210, 1273 TPMD: tpm/tpm_testing.c:74: Debug: run_3: 659, 619 TPMD: tpm/tpm_testing.c:75: Debug: run_4: 310, 309 TPMD: tpm/tpm_testing.c:76: Debug: run_5: 145, 169 TPMD: tpm/tpm_testing.c:77: Debug: run_6+: 166, 147 TPMD: tpm/tpm_testing.c:78: Debug: run_34: 0 TPMD: tpm/tpm_testing.c:112: Debug: tpm_test_sha1() TPMD: tpm/tpm_testing.c:156: Debug: tpm_test_hmac() TPMD: tpm/tpm_testing.c:183: Debug: tpm_test_rsa_EK() TPMD: tpm/tpm_testing.c:185: Debug: rsa_generate_key() TPMD: tpm/tpm_testing.c:190: Debug: testing endorsement key TPMD: tpm/tpm_testing.c:196: Debug: rsa_sign(RSA_SSA_PKCS1_SHA1) TPMD: tpm/tpm_testing.c:199: Debug: rsa_verify(RSA_SSA_PKCS1_SHA1) TPMD: tpm/tpm_testing.c:202: Debug: rsa_sign(RSA_SSA_PKCS1_DER) TPMD: tpm/tpm_testing.c:205: Debug: rsa_verify(RSA_SSA_PKCS1_DER) TPMD: tpm/tpm_testing.c:209: Debug: rsa_encrypt(RSA_ES_PKCSV15) TPMD: tpm/tpm_testing.c:213: Debug: rsa_decrypt(RSA_ES_PKCSV15) TPMD: tpm/tpm_testing.c:217: Debug: verify plain text TPMD: tpm/tpm_testing.c:220: Debug: rsa_encrypt(RSA_ES_OAEP_SHA1) TPMD: tpm/tpm_testing.c:224: Debug: rsa_decrypt(RSA_ES_OAEP_SHA1) TPMD: tpm/tpm_testing.c:228: Debug: verify plain text TPMD: tpm/tpm_testing.c:260: Info: Self-Test succeeded TPMD: tpm/tpm_startup.c:45: Info: TPM_Startup(1) Recv[14]: 0x0 c1 0 0 0 e 0 0 0 46 0 0 1 0 TPMD: tpm/tpm_cmd_handler.c:4156: Debug: tpm_handle_command() TPMD: tpm/tpm_cmd_handler.c:3467: Debug: [TPM_TAG_RQU_COMMAND] TPMD: tpm/tpm_cmd_handler.c:3768: Debug: [TPM_ORD_GetRandom] TPMD: tpm/tpm_crypto.c:159: Info: TPM_GetRandom() TPMD: tpm/tpm_cmd_handler.c:4111: Info: TPM command succeeded Sent[270]: 0 c4 0 0 1 e 0 0 0 0 0 0 1 0 17 d1 99 9b 5c 67 19 2b c0 7d 22 96 65 3a 84 3f ee 19 32 f2 db 7c d8 a7 3b ac 5d ad 62 db 6a 2c c3 c8 12 6f c2 3c 51 9c a1 81 76 7b fe 52 1c 50 5c 8d ac c9 6d f3 16 de 95 7e b1 52 2f c5 73 88 ce 7d bb f8 de 1 7a 6e 74 2e 29 2 fd 77 f4 7b 4a cb 36 34 a1 52 b2 31 25 dc 71 98 da a3 c3 94 b7 d0 32 82 7a 1d 6e cb a6 e8 c3 91 41 75 9a 58 90 2d f4 6d f4 38 2c 8e 5 f1 c3 c6 c9 7b 3 d7 1d f9 c 7b 4f d5 e5 b2 a6 a1 5c 41 b4 a7 b7 1 70 6d 9f 53 87 ca a9 62 c5 c7 26 19 f0 4d db 45 f fd 7e 5a 4e 39 34 6d 73 2b 3f 7f 27 b7 a7 ca bb 9b 35 ed 5c 57 fa 70 ec c a9 c3 51 4 21 44 7d fd 7d bc b5 40 8 81 57 36 fa ea 83 34 3f d8 9c ca bd e 4c 44 99 5d cc c0 75 55 7e d8 e6 8d 98 7 a3 94 b4 2a f8 97 5b b7 b2 b0 f4 d2 34 5b d2 bb e1 d7 75 9d f8 d6 8a 87 75 61 82 f 48 24 Recv[10]: 0x0 c1 0 0 0 a 0 0 0 a TPMD: tpm/tpm_cmd_handler.c:4156: Debug: tpm_handle_command() TPMD: tpm/tpm_cmd_handler.c:3467: Debug: [TPM_TAG_RQU_COMMAND] TPMD: tpm/tpm_cmd_handler.c:3863: Debug: [TPM_ORD_OIAP] TPMD: tpm/tpm_authorization.c:182: Info: TPM_OIAP() TPMD: tpm/tpm_cmd_handler.c:4111: Info: TPM command succeeded Sent[34]: 0 c4 0 0 0 22 0 0 0 0 2 0 0 0 67 b6 9f ae 94 75 28 ef 8f b0 62 29 b7 1e 18 dc b8 35 53 8f Recv[618]: 0x0 c2 0 0 2 6a 0 0 0 20 40 0 0 0 1 1 0 0 0 14 0 0 0 0 1 0 0 0 1 0 3 0 1 0 0 0 c 0 0 8 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 1 0 ba bc 11 5b 90 50 db b 66 1b f4 81 64 72 eb 89 59 c3 27 a7 55 ea 16 c1 14 a0 96 45 20 94 f0 5 86 76 a1 40 1a d3 67 16 2d c9 73 32 e6 cf d5 ee e8 f5 1c f1 b5 9f 55 f7 6c d2 9b 98 32 ad e1 36 e5 2e fb c4 ac f6 8a aa c2 2d 72 dc ac fd af f5 c2 6e da db ab fb 53 fc 86 c1 33 c7 96 d2 1e da f 50 2d ed 3a 66 f8 da db 2f 3d bb c3 b5 70 c3 9 83 bf e7 ba 44 5d 9f 22 29 b1 c5 40 cf 77 8b 5d d9 8c e0 1b 3b a2 c0 8c 51 d0 4f 8c ef d9 3a ea 17 a6 d5 88 aa a4 c4 77 27 d3 6 d9 38 c5 ba 91 a5 1b b6 10 ed 23 ac 1e dd f3 54 cf 1d 14 8b 59 1b 20 3b 13 40 4 74 39 c 72 18 b 12 fb b2 e2 9a 1d b5 34 19 be b7 e6 75 c3 c8 e4 ed 14 b0 24 31 45 f9 a1 a3 1c c4 a9 8d d5 57 49 95 a6 26 e8 3f eb 99 3e 86 26 a0 d0 5f 4 d b6 7 18 b5 81 70 73 86 2c 0 66 f5 75 96 e0 c3 33 c8 64 ef 0 0 1 0 82 1 36 f6 be de be 82 57 4b a9 fd a9 ad a 1d af 1e 93 7a 94 86 50 b1 8b cd 2d ad 88 ef 37 a3 d3 d5 e2 54 43 6a 7b 11 69 99 ed 67 dd 11 cd a2 a9 ee 8e 7b e6 49 48 5 e8 b8 20 25 b8 a5 c7 84 e8 92 dd b5 fa 3c 67 a5 9c 7d 64 eb aa 2c 9d 36 5f f 53 81 d5 7b e2 7b 1f 26 49 73 1c 60 bd ca 8 7e 4d 2e dd a8 fa ba a5 2d 52 e2 a7 4b 6e b7 95 70 31 57 6d 66 d8 d 72 af 10 e 9f 9b 71 db df 9b 27 fb 9e e4 75 35 e5 34 b3 ff 3e 98 40 b1 a 63 6f 67 e6 8b 9c 4 5d c8 3a a2 63 fa 43 7a df 31 f8 24 db 75 f8 d9 af 8b 26 e 2c e9 e7 f9 97 af 1b 80 db 9b 88 28 8e 9e 2c a0 97 a4 9d ea b9 a7 7f b1 0 dc 61 6a 5e b2 a2 8f da 68 8e 5b e0 f8 5e 33 11 72 bf 4f d0 5b 44 c8 a 78 b1 27 6d d 50 2f af 5a ba 8b 8 6e 96 8b 27 5a c7 74 2d 66 7c 12 3 22 63 fe 62 f8 72 de be 3b af 77 2 0 0 0 cf 4e 6f 5a 4a 47 50 4 22 7a 51 1c 99 71 f9 90 b3 fc 2d db 1 e5 43 f4 9 ca 8f e5 53 93 9d e5 9c 3 da 3c f3 2f fa 39 a1 TPMD: tpm/tpm_cmd_handler.c:4156: Debug: tpm_handle_command() TPMD: tpm/tpm_cmd_handler.c:3460: Debug: [TPM_TAG_RQU_AUTH1_COMMAND] TPMD: tpm/tpm_cmd_handler.c:3648: Debug: [TPM_ORD_LoadKey] TPMD: tpm/tpm_storage.c:526: Info: TPM_LoadKey() TPMD: tpm/tpm_storage.c:528: Debug: [ parentHandle=40000000 ] TPMD: tpm/tpm_cmd_handler.c:4104: Info: TPM command failed: (0x0c) The key handle presented was invalid. TPMD: tpm/tpm_eviction.c:56: Info: TPM_FlushSpecific() TPMD: tpm/tpm_eviction.c:57: Debug: [ handle=02000000 resourceType=00000002 ] Sent[10]: 0 c4 0 0 0 a 0 0 0 c Recv[0] to small: 0xRecv[14]: 0x0 c1 0 0 0 e 0 0 0 46 0 0 1 0 TPMD: tpm/tpm_cmd_handler.c:4156: Debug: tpm_handle_command() TPMD: tpm/tpm_cmd_handler.c:3467: Debug: [TPM_TAG_RQU_COMMAND] TPMD: tpm/tpm_cmd_handler.c:3768: Debug: [TPM_ORD_GetRandom] TPMD: tpm/tpm_crypto.c:159: Info: TPM_GetRandom() TPMD: tpm/tpm_cmd_handler.c:4111: Info: TPM command succeeded Sent[270]: 0 c4 0 0 1 e 0 0 0 0 0 0 1 0 c6 f4 37 65 55 c1 d7 7d 12 1 86 7b 6d 29 84 79 c 12 74 c6 65 3c a4 fd ff 88 79 13 99 67 24 da d2 4 b fc 7e f a7 2b 50 cf aa 2a 64 b0 e4 3c d3 2 54 a8 56 ec ff 88 af 62 4 14 db 12 8 b0 23 c3 77 8c 4f 5b 69 65 0 c e0 1e 13 45 63 12 a2 4d 4d 5e f9 65 60 e8 a1 41 96 a8 a8 90 13 cb e5 e8 71 61 80 8f 7f b1 a1 3 ae dd a9 ec 83 96 f2 0 7e 1f ad 5f 8c 80 85 67 c5 c1 42 41 5f ac 62 89 61 52 25 73 8 3 a9 e2 d5 8b f3 67 3b e3 c0 61 ec af 2 4f 92 78 86 8 e1 3b 48 57 29 2e f2 2d 23 b6 e7 8e 52 c2 50 e6 97 13 1b 23 59 7e ab e3 92 db 42 72 b6 12 76 64 ee 29 70 d 36 41 f1 83 3a dd 54 65 8a 64 85 2c c3 d c1 1f 9b a0 ba 95 51 ed 98 b0 9f cc 60 db f1 3f 93 b2 21 90 6 b d1 b0 a8 22 38 4d 9f 89 12 94 1c 3e 96 84 a3 e5 6c eb b0 ec 74 f4 ef 2e 1d 23 95 35 61 20 Recv[10]: 0x0 c1 0 0 0 a 0 0 0 a TPMD: tpm/tpm_cmd_handler.c:4156: Debug: tpm_handle_command() TPMD: tpm/tpm_cmd_handler.c:3467: Debug: [TPM_TAG_RQU_COMMAND] TPMD: tpm/tpm_cmd_handler.c:3863: Debug: [TPM_ORD_OIAP] TPMD: tpm/tpm_authorization.c:182: Info: TPM_OIAP() TPMD: tpm/tpm_cmd_handler.c:4111: Info: TPM command succeeded Sent[34]: 0 c4 0 0 0 22 0 0 0 0 2 0 0 0 75 5d b3 d2 fd 85 ef 5b 21 23 6f 77 d0 23 79 b4 7b d2 ba 6a Recv[618]: 0x0 c2 0 0 2 6a 0 0 0 20 40 0 0 0 1 1 0 0 0 14 0 0 0 0 1 0 0 0 1 0 3 0 1 0 0 0 c 0 0 8 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 1 0 ba bc 11 5b 90 50 db b 66 1b f4 81 64 72 eb 89 59 c3 27 a7 55 ea 16 c1 14 a0 96 45 20 94 f0 5 86 76 a1 40 1a d3 67 16 2d c9 73 32 e6 cf d5 ee e8 f5 1c f1 b5 9f 55 f7 6c d2 9b 98 32 ad e1 36 e5 2e fb c4 ac f6 8a aa c2 2d 72 dc ac fd af f5 c2 6e da db ab fb 53 fc 86 c1 33 c7 96 d2 1e da f 50 2d ed 3a 66 f8 da db 2f 3d bb c3 b5 70 c3 9 83 bf e7 ba 44 5d 9f 22 29 b1 c5 40 cf 77 8b 5d d9 8c e0 1b 3b a2 c0 8c 51 d0 4f 8c ef d9 3a ea 17 a6 d5 88 aa a4 c4 77 27 d3 6 d9 38 c5 ba 91 a5 1b b6 10 ed 23 ac 1e dd f3 54 cf 1d 14 8b 59 1b 20 3b 13 40 4 74 39 c 72 18 b 12 fb b2 e2 9a 1d b5 34 19 be b7 e6 75 c3 c8 e4 ed 14 b0 24 31 45 f9 a1 a3 1c c4 a9 8d d5 57 49 95 a6 26 e8 3f eb 99 3e 86 26 a0 d0 5f 4 d b6 7 18 b5 81 70 73 86 2c 0 66 f5 75 96 e0 c3 33 c8 64 ef 0 0 1 0 82 1 36 f6 be de be 82 57 4b a9 fd a9 ad a 1d af 1e 93 7a 94 86 50 b1 8b cd 2d ad 88 ef 37 a3 d3 d5 e2 54 43 6a 7b 11 69 99 ed 67 dd 11 cd a2 a9 ee 8e 7b e6 49 48 5 e8 b8 20 25 b8 a5 c7 84 e8 92 dd b5 fa 3c 67 a5 9c 7d 64 eb aa 2c 9d 36 5f f 53 81 d5 7b e2 7b 1f 26 49 73 1c 60 bd ca 8 7e 4d 2e dd a8 fa ba a5 2d 52 e2 a7 4b 6e b7 95 70 31 57 6d 66 d8 d 72 af 10 e 9f 9b 71 db df 9b 27 fb 9e e4 75 35 e5 34 b3 ff 3e 98 40 b1 a 63 6f 67 e6 8b 9c 4 5d c8 3a a2 63 fa 43 7a df 31 f8 24 db 75 f8 d9 af 8b 26 e 2c e9 e7 f9 97 af 1b 80 db 9b 88 28 8e 9e 2c a0 97 a4 9d ea b9 a7 7f b1 0 dc 61 6a 5e b2 a2 8f da 68 8e 5b e0 f8 5e 33 11 72 bf 4f d0 5b 44 c8 a 78 b1 27 6d d 50 2f af 5a ba 8b 8 6e 96 8b 27 5a c7 74 2d 66 7c 12 3 22 63 fe 62 f8 72 de be 3b af 77 2 0 0 0 31 ec ee 35 32 51 b0 30 84 5d 12 5f 93 a0 ff ac 5d 66 5 2b 1 ca 51 db 20 6e 69 51 25 d1 f1 8d 26 16 70 26 d1 ca bc 49 26 TPMD: tpm/tpm_cmd_handler.c:4156: Debug: tpm_handle_command() TPMD: tpm/tpm_cmd_handler.c:3460: Debug: [TPM_TAG_RQU_AUTH1_COMMAND] TPMD: tpm/tpm_cmd_handler.c:3648: Debug: [TPM_ORD_LoadKey] TPMD: tpm/tpm_storage.c:526: Info: TPM_LoadKey() TPMD: tpm/tpm_storage.c:528: Debug: [ parentHandle=40000000 ] TPMD: tpm/tpm_cmd_handler.c:4104: Info: TPM command failed: (0x0c) The key handle presented was invalid. TPMD: tpm/tpm_eviction.c:56: Info: TPM_FlushSpecific() TPMD: tpm/tpm_eviction.c:57: Debug: [ handle=02000000 resourceType=00000002 ] Sent[10]: 0 c4 0 0 0 a 0 0 0 c Recv[0] to small: 0xRecv[14]: 0x0 c1 0 0 0 e 0 0 0 46 0 0 1 0 TPMD: tpm/tpm_cmd_handler.c:4156: Debug: tpm_handle_command() TPMD: tpm/tpm_cmd_handler.c:3467: Debug: [TPM_TAG_RQU_COMMAND] TPMD: tpm/tpm_cmd_handler.c:3768: Debug: [TPM_ORD_GetRandom] TPMD: tpm/tpm_crypto.c:159: Info: TPM_GetRandom() TPMD: tpm/tpm_cmd_handler.c:4111: Info: TPM command succeeded Sent[270]: 0 c4 0 0 1 e 0 0 0 0 0 0 1 0 1b 40 4a bf 9e 23 1a 91 7c 4f c7 a5 3d 7e ac 4d db 23 28 f2 56 d6 52 e 5c 17 d7 f1 cb ad 57 8d 23 45 7b a8 6e 48 22 e3 a e3 aa 2a 65 61 6d e7 70 f2 a e7 c6 35 ff 3d cd d9 a 6c 4c 1a 66 c3 bc d5 ec 4a fb 77 31 81 48 d9 51 ce 70 c8 65 12 b2 a5 e5 f1 a6 fa d4 c9 48 4a 6d c3 4e 16 de 74 48 27 77 70 32 e3 c7 65 21 51 d2 c3 7c 21 d 8c dd eb 86 d6 46 fc ca e2 d8 11 41 48 ff 7c 3b e4 af 4e dc f4 66 d9 8d 8c 2b 47 a0 3e f2 f0 4d 28 94 1b 55 a2 c9 dc 41 60 df 4a f5 40 86 5 1 83 8f 1b ee 60 26 c1 70 3e 6d 2b 1e 38 d6 ec 81 9a a3 87 34 13 6c 8 c6 99 7a cc 2a e0 1f 54 f3 78 4c e3 c2 a2 5d 22 65 b1 65 7f d4 4 47 6 72 17 47 ef 71 b ce d7 a1 f5 df dd f 2f f8 54 41 ff d6 28 57 35 c8 f8 9a e9 35 e4 85 72 af e0 8a 9f 8 c2 13 54 86 75 3 74 7c 65 d8 1a 9b ff a6 87 Recv[10]: 0x0 c1 0 0 0 a 0 0 0 a TPMD: tpm/tpm_cmd_handler.c:4156: Debug: tpm_handle_command() TPMD: tpm/tpm_cmd_handler.c:3467: Debug: [TPM_TAG_RQU_COMMAND] TPMD: tpm/tpm_cmd_handler.c:3863: Debug: [TPM_ORD_OIAP] TPMD: tpm/tpm_authorization.c:182: Info: TPM_OIAP() TPMD: tpm/tpm_cmd_handler.c:4111: Info: TPM command succeeded Sent[34]: 0 c4 0 0 0 22 0 0 0 0 2 0 0 0 23 e1 c5 fe d5 78 d3 1f 60 9d b5 ad d0 71 2c 80 7 aa 9f bb Recv[618]: 0x0 c2 0 0 2 6a 0 0 0 20 40 0 0 0 1 1 0 0 0 14 0 0 0 0 1 0 0 0 1 0 3 0 1 0 0 0 c 0 0 8 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 1 0 ba bc 11 5b 90 50 db b 66 1b f4 81 64 72 eb 89 59 c3 27 a7 55 ea 16 c1 14 a0 96 45 20 94 f0 5 86 76 a1 40 1a d3 67 16 2d c9 73 32 e6 cf d5 ee e8 f5 1c f1 b5 9f 55 f7 6c d2 9b 98 32 ad e1 36 e5 2e fb c4 ac f6 8a aa c2 2d 72 dc ac fd af f5 c2 6e da db ab fb 53 fc 86 c1 33 c7 96 d2 1e da f 50 2d ed 3a 66 f8 da db 2f 3d bb c3 b5 70 c3 9 83 bf e7 ba 44 5d 9f 22 29 b1 c5 40 cf 77 8b 5d d9 8c e0 1b 3b a2 c0 8c 51 d0 4f 8c ef d9 3a ea 17 a6 d5 88 aa a4 c4 77 27 d3 6 d9 38 c5 ba 91 a5 1b b6 10 ed 23 ac 1e dd f3 54 cf 1d 14 8b 59 1b 20 3b 13 40 4 74 39 c 72 18 b 12 fb b2 e2 9a 1d b5 34 19 be b7 e6 75 c3 c8 e4 ed 14 b0 24 31 45 f9 a1 a3 1c c4 a9 8d d5 57 49 95 a6 26 e8 3f eb 99 3e 86 26 a0 d0 5f 4 d b6 7 18 b5 81 70 73 86 2c 0 66 f5 75 96 e0 c3 33 c8 64 ef 0 0 1 0 82 1 36 f6 be de be 82 57 4b a9 fd a9 ad a 1d af 1e 93 7a 94 86 50 b1 8b cd 2d ad 88 ef 37 a3 d3 d5 e2 54 43 6a 7b 11 69 99 ed 67 dd 11 cd a2 a9 ee 8e 7b e6 49 48 5 e8 b8 20 25 b8 a5 c7 84 e8 92 dd b5 fa 3c 67 a5 9c 7d 64 eb aa 2c 9d 36 5f f 53 81 d5 7b e2 7b 1f 26 49 73 1c 60 bd ca 8 7e 4d 2e dd a8 fa ba a5 2d 52 e2 a7 4b 6e b7 95 70 31 57 6d 66 d8 d 72 af 10 e 9f 9b 71 db df 9b 27 fb 9e e4 75 35 e5 34 b3 ff 3e 98 40 b1 a 63 6f 67 e6 8b 9c 4 5d c8 3a a2 63 fa 43 7a df 31 f8 24 db 75 f8 d9 af 8b 26 e 2c e9 e7 f9 97 af 1b 80 db 9b 88 28 8e 9e 2c a0 97 a4 9d ea b9 a7 7f b1 0 dc 61 6a 5e b2 a2 8f da 68 8e 5b e0 f8 5e 33 11 72 bf 4f d0 5b 44 c8 a 78 b1 27 6d d 50 2f af 5a ba 8b 8 6e 96 8b 27 5a c7 74 2d 66 7c 12 3 22 63 fe 62 f8 72 de be 3b af 77 2 0 0 0 16 c4 31 17 c6 e2 d1 7b 6e 7d 37 f 45 6a a8 40 53 c9 b8 23 1 c d9 6f 49 c4 bc 38 68 e4 e2 8b 36 cd 22 35 66 ee 54 d 23 TPMD: tpm/tpm_cmd_handler.c:4156: Debug: tpm_handle_command() TPMD: tpm/tpm_cmd_handler.c:3460: Debug: [TPM_TAG_RQU_AUTH1_COMMAND] TPMD: tpm/tpm_cmd_handler.c:3648: Debug: [TPM_ORD_LoadKey] TPMD: tpm/tpm_storage.c:526: Info: TPM_LoadKey() TPMD: tpm/tpm_storage.c:528: Debug: [ parentHandle=40000000 ] TPMD: tpm/tpm_cmd_handler.c:4104: Info: TPM command failed: (0x0c) The key handle presented was invalid. TPMD: tpm/tpm_eviction.c:56: Info: TPM_FlushSpecific() TPMD: tpm/tpm_eviction.c:57: Debug: [ handle=02000000 resourceType=00000002 ] Sent[10]: 0 c4 0 0 0 a 0 0 0 c Thank you very much. -- Best Regards, Gavin > > > >> >> >> Dom0: >> [root@localhost fc8_new]# ls /sys/devices/xen-backend/ >> console-3-0 power uevent vbd-3-2049 vfb-3-0 vif-3-0 vkbd-3-0 >> >> DomU: >> [root@gavin-pv tpm]# ls /sys/devices/xen >> power uevent vbd-2049 vfb-0 vif-0 vkbd-0 >> >> >> >>> >>> 2. In Dom0, I run "modprobe tpmd_dev" and "modprobe tpmbk" also >>> successfully and I can get the devices /dev/tpm, /dev/tpm0, and /dev/vtpm. >>> However, I cannot start the tpm emulator (# ./tpmd -f clear pvm 1) and vtpm >>> manager (# vtpm_managerd). The related info and output error from Dom0 is >>> also list here. >>> >>> So you want to use the TPM emulator on dom0 instead of a physical TPM? >>> >> Yes, I try to use TPM emulator right now. >> In fact, there is a physical TPM chip in my laptop. But I'm not sure how >> to make it work in fedora8. So, when the vTPM works well on emulator, I >> will try to abandon the emulator and use the physical TPM. >> >> In that case you might want to make sure the TPM is disabled in the >> BIOS if you want to use the emulator. Your dom0 kernel might have tpm >> drivers built in which could cause a possible conflict with the emulator. >> >> Using the tpm emulator in dom0 has its own collection of issues. You >> might want to get the physical tpm working first and then play with vtpms. >> We used TPM successfully on Fedora 8. >> >> Try this: >> Reboot your machine and get into the bios. Clear the TPM and then >> activiate it. You might not have that option to clear if its disabled, in >> that case just activiate it. In fedora install trousers and tpm_tools. >> Start tcsd and try tpm_version or some other command to ensure your TPM is >> working. If not, make sure all of the TPM drivers are either compiled into >> the kernel or loaded as modules. >> > Now, I try to use physical TPM directly instead of an emulator. I try to > make the physical TPM work firstly. I did what you suggested above, but I > still encountered some problems. > The TPM relevant modules in Dom0 are loaded like this. > > modprobe tpm_bios > modprobe tpm > modprobe tpm_tis force=1 > > Then, I got the /dev/tpm0. > However, I cannot start tcsd and vtpm_managerd in Dom0. The output is as > the following. > > *[root@localhost Xen]# tcsd -f* > TCSD TDDL ioctl: (25) Inappropriate ioctl for device > TCSD TDDL Falling back to Read/Write device support. > TCSD TDDL ERROR: read from device /dev/tpm0 failed: Input/output error > TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087 > > *[root@localhost vtpm_manager]# vtpm_managerd* > INFO[VTPM]: Starting VTPM. > INFO[TCS]: Constructing new TCS: > INFO[TCS]: Calling TCS_OpenContext: > ERROR[TXDATA]: read() failed*** ERRORDIE in TDDL_TransmitData at > transmit.c: 89 > ERROR in VTPM_Init_Manager at vtpm_manager.c:215 code: TPM_FAIL. > ERROR[VTPM]: Closing vtpmd due to error during startup. > > > I searched in google for a while, but I still cannot resolve it. > Do you have any suggestions on these problems? Thanks in advance. > > You can't run tcsd and vtpm manager at the same time. Only use tcsd to > test if your tpm if working and then kill the process and disable it from > starting on boot (chkconfig tcsd off). Make sure tcsd is not already > running in the background before you try running it yourself (ps -ef | grep > tcsd). If you try 2 instances of tcsd it will fail. > > > > >> >> >> >> >>> >>> I see you listed /dev/tpm and /dev/tpm0. I believe the old manager is >>> hard coded to use the second one. Is tpmd creating both? >>> >> Yes. When modprobe the tpmd_dev module, these two devices are created. >> >> >> Thanks again. >> >> >> >>> >>> >>> *[root@localhost tpmd]# lsmod | grep tpm* >>> tpmd_dev 10416 0 >>> tpmbk 19516 0 [permanent] >>> >>> *[root@localhost tpmd]# ./tpmd -f clear pvm 1* >>> VTPMD[0]: tpmd.c:766: Info: starting TPM Emulator daemon >>> VTPMD[0]: tpmd.c:369: Info: parsing options >>> VTPMD[1]: tpmd.c:478: Info: openening random device /dev/urandom >>> VTPMD[1]: tpmd.c:621: Info: staring main loop >>> Loading NVM. >>> Error in read_from_file:301 >>> VTPMD[1]: ../tpm/tpm_data.c:83: Info: initializing TPM data to default >>> values >>> VTPMD[1]: ../tpm/tpm_startup.c:30: Info: TPM_Init() >>> VTPMD[1]: ../tpm/tpm_testing.c:242: Info: TPM_SelfTestFull() >>> VTPMD[1]: ../tpm/tpm_testing.c:260: Info: Self-Test succeeded >>> VTPMD[1]: ../tpm/tpm_startup.c:44: Info: TPM_Startup(1) >>> VTPMD[1]: tpmd.c:661: Error: Failed to open devices to listen to guest. >>> >>> >>> >>> >>> *[root@localhost vtpm]# vtpm_managerd* >>> INFO[VTPM]: Starting VTPM. >>> INFO[TCS]: Constructing new TCS: >>> ERROR[TXDATA]: TPM open failedERROR in VTPM_Init_Manager at >>> vtpm_manager.c:205 code: >>> TPM_IOERROR. >>> ERROR[VTPM]: Closing vtpmd due to error during startup. >>> >>> >>> Thanks in advance for your any reply. >>> >>> -- >>> Best Regards, >>> Gavin >>> >>> >>> >>> >>> _______________________________________________ >>> Xen-devel mailing list >>> Xen-devel@lists.xen.org >>> http://lists.xen.org/xen-devel >>> >>> >> >> >> Keep in mind that the old vTPM system is deprecated and I can only >> provide limited support. If you can't get it to work I would suggest >> pulling the latest xen-unstable and my latest patch set on here and trying >> to use that. >> > Well, it's very nice. I think maybe I need to try it later. > > > > -- > Best Regards, > Gavin > > [-- Attachment #1.2: Type: text/html, Size: 40514 bytes --] [-- Attachment #2: Type: text/plain, Size: 126 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 7+ messages in thread
* vTPM setup problem on the emulator @ 2013-01-09 8:58 gavin 0 siblings, 0 replies; 7+ messages in thread From: gavin @ 2013-01-09 8:58 UTC (permalink / raw) To: xen-users; +Cc: xen-devel [-- Attachment #1.1: Type: text/plain, Size: 2227 bytes --] Hi, I tried to install the vTPM in Xen-4.1.0 + Dom0 kernel 2.6.18.8 + DomU kernel 2.6.18.8. The device is TPM emulator. However, I encountered several problems. 1. In DomU, I run "modprobe tpm_xenu" successfully. But it doesn't creates the /dev/tpm0 device as our had expected. So, the trousers cannot be started. An old thread in Xen mail-list can do this,(http://old-list-archives.xen.org/xense-devel/2006-12/msg00002.html) but it helps little to me. Is there any problem with my vTPM front driver? The tpm related modules and other info in DomU is list here. [root@gavin-pv ~]# lsmod | grep tpm tpm_xenu 15752 0 [permanent] tpm 17952 1 tpm_xenu tpm_bios 10112 1 tpm [root@gavin-pv ~]# tcsd -f TCSD TDDL ERROR: Could not find a device to open! 2. In Dom0, I run "modprobe tpmd_dev" and "modprobe tpmbk" also successfully and I can get the devices /dev/tpm, /dev/tpm0, and /dev/vtpm. However, I cannot start the tpm emulator (# ./tpmd -f clear pvm 1) and vtpm manager (# vtpm_managerd). The related info and output error from Dom0 is also list here. [root@localhost tpmd]# lsmod | grep tpm tpmd_dev 10416 0 tpmbk 19516 0 [permanent] [root@localhost tpmd]# ./tpmd -f clear pvm 1 VTPMD[0]: tpmd.c:766: Info: starting TPM Emulator daemon VTPMD[0]: tpmd.c:369: Info: parsing options VTPMD[1]: tpmd.c:478: Info: openening random device /dev/urandom VTPMD[1]: tpmd.c:621: Info: staring main loop Loading NVM. Error in read_from_file:301 VTPMD[1]: ../tpm/tpm_data.c:83: Info: initializing TPM data to default values VTPMD[1]: ../tpm/tpm_startup.c:30: Info: TPM_Init() VTPMD[1]: ../tpm/tpm_testing.c:242: Info: TPM_SelfTestFull() VTPMD[1]: ../tpm/tpm_testing.c:260: Info: Self-Test succeeded VTPMD[1]: ../tpm/tpm_startup.c:44: Info: TPM_Startup(1) VTPMD[1]: tpmd.c:661: Error: Failed to open devices to listen to guest. [root@localhost vtpm]# vtpm_managerd INFO[VTPM]: Starting VTPM. INFO[TCS]: Constructing new TCS: ERROR[TXDATA]: TPM open failedERROR in VTPM_Init_Manager at vtpm_manager.c:205 code: TPM_IOERROR. ERROR[VTPM]: Closing vtpmd due to error during startup. Thanks in advance for your any reply. -- Best Regards, Gavin [-- Attachment #1.2: Type: text/html, Size: 2737 bytes --] [-- Attachment #2: Type: text/plain, Size: 126 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2013-01-16 17:45 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <36a97c6a.ff69.13c1e887f12.Coremail.gbtux@126.com>
2013-01-09 19:33 ` vTPM setup problem on the emulator Matthew Fioravante
2013-01-10 2:17 ` Bei Guan
2013-01-10 15:51 ` Matthew Fioravante
2013-01-11 3:11 ` Bei Guan
2013-01-14 21:11 ` Matthew Fioravante
2013-01-16 17:45 ` Bei Guan
2013-01-09 8:58 gavin
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).