From: Julien Grall <julien.grall@citrix.com>
To: Gihun Jung <gihun.jung@gmail.com>
Cc: Anthony Perard <anthony.perard@citrix.com>,
"xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>
Subject: Re: Can not boot Dom0 when using Anthony's new XenARM source for Arndale.
Date: Wed, 27 Mar 2013 11:53:10 +0000 [thread overview]
Message-ID: <5152DDA6.6060909@citrix.com> (raw)
In-Reply-To: <CALnjYg6RV9nNhuC5eLXiPqd7ERLZkr5H4jvD2dpdUB4UfwhMAQ@mail.gmail.com>
On 03/27/2013 08:15 AM, Gihun Jung wrote:
> 2013/3/27 Julien Grall <julien.grall@citrix.com>:
>> On 03/25/2013 10:35 AM, Gihun Jung wrote:
>>
>>> Hi Xen Developers,
>>
>> Hello,
>>
>>
>>> I had tested new XenARM for Arndale board that is updated in Anthony's
>>> tree from 2 days ago.
>>>
>>> I expected that will be working. But, I can not boot Dom0 Kernel.
>>> I used kernel and XenARM both are from Xen
>>> Wiki(http://wiki.xen.org/wiki/Xen_ARM_with_Virtualization_Extensions/Arndale).
>>>
>>> It (seems) stopped after "(XEN) Freed 212kB init memory" message. When
>>> I changed serial input to Xen ('ctrl-a' 3 times) and dump state, it
>>> show we are in Undefined processor mode or sometimes in Abort mode.
>>>
>>> Does anyone else have the same problem? or Am I doing something wrong?
>>
>> I have updated the wiki page and the linux git.
>> Could you retry with the new instructions? If you still have this issue,
>> could you send serial output?
>>
>> Thanks,
>>
>> Julien
>>
>
>
> Thanks for your reply. It is pleasure to read updated wiki!
> I have solved this issues with changing the load address of zImage by
> u-boot to 0x60000000 from 0x40007000.
> In that case, we should change "reg" of "module@0" node, which
> described xen,multiboot-module as compatible from
> exynos5250-ardale.dts.
> The default value is reg = <0x40007000, 0x40000>. Am I doing right to
> change 0x40007000 to 0x60000000?. It succeed to boot when i change it.
> However, when I just leave it as a default and loaded zImage at
> 0x60000000, it was not working: Xen could not find zImage.
> I think you will mention about this matter on wiki for clearing this
> situation if it is right.
I made a commit yesterday evening to change module@0 base address. I
don't have access to Anthony's git so I have created a new git:
http://xenbits.xen.org/gitweb/?p=people/julieng/linux-arm.git;a=summary
The wiki should point to the new git.
Cheers,
Julien
next prev parent reply other threads:[~2013-03-27 11:53 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-25 10:35 Can not boot Dom0 when using Anthony's new XenARM source for Arndale Gihun Jung
2013-03-26 19:35 ` Julien Grall
2013-03-27 3:03 ` Chen Baozi
2013-03-27 12:21 ` Julien Grall
2013-03-27 8:15 ` Gihun Jung
2013-03-27 11:53 ` Julien Grall [this message]
-- strict thread matches above, loose matches on Subject: below --
2013-03-25 10:43 Gihun Jung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5152DDA6.6060909@citrix.com \
--to=julien.grall@citrix.com \
--cc=anthony.perard@citrix.com \
--cc=gihun.jung@gmail.com \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).