* [RFC PATCH v2, part3 07/11] PCI, xen-pcifront: use new PCI interfaces to simplify implementation [not found] <1368719459-24800-1-git-send-email-jiang.liu@huawei.com> @ 2013-05-16 15:50 ` Jiang Liu 2013-06-07 14:50 ` Konrad Rzeszutek Wilk 2013-05-16 15:50 ` [RFC PATCH v2, part3 08/11] PCI, xen-pcifront: use PCI bus lock to protect PCI device hotplug Jiang Liu 1 sibling, 1 reply; 12+ messages in thread From: Jiang Liu @ 2013-05-16 15:50 UTC (permalink / raw) To: Bjorn Helgaas, Yinghai Lu Cc: Jeremy Fitzhardinge, xen-devel, Toshi Kani, Jiang Liu, Konrad Rzeszutek Wilk, Greg Kroah-Hartman, linux-kernel, virtualization, Rafael J . Wysocki, Yijing Wang, linux-pci, Gu Zheng, Myron Stowe, Jiang Liu Use new PCI interfaces to simplify xen-pcifront implementation: 1) Use pci_create_root_bus() instead of pci_scan_bus_parented() because pci_scan_bus_parented() is marked as __deprecated.This also gets rid of a duplicated call of pci_bus_start_devices(). 2) Use pci_stop_root_bus() and pci_remove_root_bus() instead of open-coded private implementation. 3) Use pci_set_host_bridge_release() to release data structures associated with PCI root buses. 4) Use pci_bus_get()/pci_bus_put() to manage PCI root bus reference count. This is also a preparation for coming PCI bus lock enhancement. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-pci@vger.kernel.org Cc: linux-kernel@vger.kernel.org --- drivers/pci/xen-pcifront.c | 81 ++++++++++++++++++++++------------------------ 1 file changed, 39 insertions(+), 42 deletions(-) diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c index 816cf94..6aa2c0f 100644 --- a/drivers/pci/xen-pcifront.c +++ b/drivers/pci/xen-pcifront.c @@ -25,11 +25,6 @@ #define INVALID_GRANT_REF (0) #define INVALID_EVTCHN (-1) -struct pci_bus_entry { - struct list_head list; - struct pci_bus *bus; -}; - #define _PDEVB_op_active (0) #define PDEVB_op_active (1 << (_PDEVB_op_active)) @@ -47,12 +42,12 @@ struct pcifront_device { struct xen_pci_sharedinfo *sh_info; struct work_struct op_work; unsigned long flags; - }; struct pcifront_sd { int domain; struct pcifront_device *pdev; + struct resource busn_res; }; static inline struct pcifront_device * @@ -67,6 +62,12 @@ static inline void pcifront_init_sd(struct pcifront_sd *sd, { sd->domain = domain; sd->pdev = pdev; + + /* Xen pci-backend doesn't export P2P bridges */ + sd->busn_res.start = bus; + sd->busn_res.end = bus; + sd->busn_res.flags = IORESOURCE_BUS; + sd->busn_res.name = "PCI busn"; } static DEFINE_SPINLOCK(pcifront_dev_lock); @@ -441,12 +442,19 @@ static int pcifront_scan_bus(struct pcifront_device *pdev, return 0; } +static void pcifront_release_sd(struct pci_host_bridge *bridge) +{ + struct pcifront_sd *sd = bridge->release_data; + + kfree(sd); +} + static int pcifront_scan_root(struct pcifront_device *pdev, unsigned int domain, unsigned int bus) { struct pci_bus *b; struct pcifront_sd *sd = NULL; - struct pci_bus_entry *bus_entry = NULL; + LIST_HEAD(resources); int err = 0; #ifndef CONFIG_PCI_DOMAINS @@ -463,16 +471,18 @@ static int pcifront_scan_root(struct pcifront_device *pdev, dev_info(&pdev->xdev->dev, "Creating PCI Frontend Bus %04x:%02x\n", domain, bus); - bus_entry = kmalloc(sizeof(*bus_entry), GFP_KERNEL); - sd = kmalloc(sizeof(*sd), GFP_KERNEL); - if (!bus_entry || !sd) { + sd = kzalloc(sizeof(*sd), GFP_KERNEL); + if (!sd) { err = -ENOMEM; goto err_out; } pcifront_init_sd(sd, domain, bus, pdev); - b = pci_scan_bus_parented(&pdev->xdev->dev, bus, - &pcifront_bus_ops, sd); + pci_add_resource(&resources, &ioport_resource); + pci_add_resource(&resources, &iomem_resource); + pci_add_resource(&resources, &sd->busn_res); + b = pci_create_root_bus(&pdev->xdev->dev, bus, &pcifront_bus_ops, + sd, &resources); if (!b) { dev_err(&pdev->xdev->dev, "Error creating PCI Frontend Bus!\n"); @@ -480,12 +490,14 @@ static int pcifront_scan_root(struct pcifront_device *pdev, goto err_out; } - bus_entry->bus = b; + pci_set_host_bridge_release(to_pci_host_bridge(b->bridge), + pcifront_release_sd, sd); - list_add(&bus_entry->list, &pdev->root_buses); - - /* pci_scan_bus_parented skips devices which do not have a have - * devfn==0. The pcifront_scan_bus enumerates all devfn. */ + /* + * Every PCI physical device should have function 0, but that's not + * true for xen. + * So use pcifront_scan_bus() instead of pci_scan_child_bus(). + */ err = pcifront_scan_bus(pdev, domain, bus, b); /* Claim resources before going "live" with our devices */ @@ -497,7 +509,6 @@ static int pcifront_scan_root(struct pcifront_device *pdev, return err; err_out: - kfree(bus_entry); kfree(sd); return err; @@ -539,35 +550,19 @@ static int pcifront_rescan_root(struct pcifront_device *pdev, return err; } -static void free_root_bus_devs(struct pci_bus *bus) -{ - struct pci_dev *dev; - - while (!list_empty(&bus->devices)) { - dev = container_of(bus->devices.next, struct pci_dev, - bus_list); - dev_dbg(&dev->dev, "removing device\n"); - pci_stop_and_remove_bus_device(dev); - } -} - static void pcifront_free_roots(struct pcifront_device *pdev) { - struct pci_bus_entry *bus_entry, *t; + struct pcifront_sd *sd; + struct pci_bus *bus; dev_dbg(&pdev->xdev->dev, "cleaning up root buses\n"); - list_for_each_entry_safe(bus_entry, t, &pdev->root_buses, list) { - list_del(&bus_entry->list); - - free_root_bus_devs(bus_entry->bus); - - kfree(bus_entry->bus->sysdata); - - device_unregister(bus_entry->bus->bridge); - pci_remove_bus(bus_entry->bus); - - kfree(bus_entry); + for_each_pci_root_bus(bus) { + sd = bus->sysdata; + if (sd->pdev == pdev) { + pci_stop_root_bus(bus); + pci_remove_root_bus(bus); + } } } @@ -670,6 +665,7 @@ static irqreturn_t pcifront_handler_aer(int irq, void *dev) schedule_pcifront_aer_op(pdev); return IRQ_HANDLED; } + static int pcifront_connect_and_init_dma(struct pcifront_device *pdev) { int err = 0; @@ -705,6 +701,7 @@ static void pcifront_disconnect(struct pcifront_device *pdev) spin_unlock(&pcifront_dev_lock); } + static struct pcifront_device *alloc_pdev(struct xenbus_device *xdev) { struct pcifront_device *pdev; -- 1.8.1.2 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [RFC PATCH v2, part3 07/11] PCI, xen-pcifront: use new PCI interfaces to simplify implementation 2013-05-16 15:50 ` [RFC PATCH v2, part3 07/11] PCI, xen-pcifront: use new PCI interfaces to simplify implementation Jiang Liu @ 2013-06-07 14:50 ` Konrad Rzeszutek Wilk 2013-06-07 15:17 ` Jiang Liu ` (2 more replies) 0 siblings, 3 replies; 12+ messages in thread From: Konrad Rzeszutek Wilk @ 2013-06-07 14:50 UTC (permalink / raw) To: Jiang Liu Cc: Jeremy Fitzhardinge, xen-devel, Toshi Kani, Jiang Liu, Myron Stowe, Greg Kroah-Hartman, linux-kernel, virtualization, Rafael J . Wysocki, Gu Zheng, Yijing Wang, linux-pci, Bjorn Helgaas, Yinghai Lu On Thu, May 16, 2013 at 11:50:55PM +0800, Jiang Liu wrote: > Use new PCI interfaces to simplify xen-pcifront implementation: > 1) Use pci_create_root_bus() instead of pci_scan_bus_parented() > because pci_scan_bus_parented() is marked as __deprecated.This > also gets rid of a duplicated call of pci_bus_start_devices(). > 2) Use pci_stop_root_bus() and pci_remove_root_bus() instead of > open-coded private implementation. > 3) Use pci_set_host_bridge_release() to release data structures > associated with PCI root buses. > 4) Use pci_bus_get()/pci_bus_put() to manage PCI root bus reference > count. > > This is also a preparation for coming PCI bus lock enhancement. > > Signed-off-by: Jiang Liu <jiang.liu@huawei.com> > Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> > Cc: Jeremy Fitzhardinge <jeremy@goop.org> > Cc: xen-devel@lists.xensource.com > Cc: virtualization@lists.linux-foundation.org > Cc: linux-pci@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > --- > drivers/pci/xen-pcifront.c | 81 ++++++++++++++++++++++------------------------ > 1 file changed, 39 insertions(+), 42 deletions(-) > > diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c > index 816cf94..6aa2c0f 100644 > --- a/drivers/pci/xen-pcifront.c > +++ b/drivers/pci/xen-pcifront.c > @@ -25,11 +25,6 @@ > #define INVALID_GRANT_REF (0) > #define INVALID_EVTCHN (-1) > > -struct pci_bus_entry { > - struct list_head list; > - struct pci_bus *bus; > -}; > - > #define _PDEVB_op_active (0) > #define PDEVB_op_active (1 << (_PDEVB_op_active)) > > @@ -47,12 +42,12 @@ struct pcifront_device { > struct xen_pci_sharedinfo *sh_info; > struct work_struct op_work; > unsigned long flags; > - > }; > > struct pcifront_sd { > int domain; > struct pcifront_device *pdev; > + struct resource busn_res; > }; > > static inline struct pcifront_device * > @@ -67,6 +62,12 @@ static inline void pcifront_init_sd(struct pcifront_sd *sd, > { > sd->domain = domain; > sd->pdev = pdev; > + > + /* Xen pci-backend doesn't export P2P bridges */ > + sd->busn_res.start = bus; > + sd->busn_res.end = bus; > + sd->busn_res.flags = IORESOURCE_BUS; > + sd->busn_res.name = "PCI busn"; > } > > static DEFINE_SPINLOCK(pcifront_dev_lock); > @@ -441,12 +442,19 @@ static int pcifront_scan_bus(struct pcifront_device *pdev, > return 0; > } > > +static void pcifront_release_sd(struct pci_host_bridge *bridge) > +{ > + struct pcifront_sd *sd = bridge->release_data; > + > + kfree(sd); > +} > + > static int pcifront_scan_root(struct pcifront_device *pdev, > unsigned int domain, unsigned int bus) > { > struct pci_bus *b; > struct pcifront_sd *sd = NULL; > - struct pci_bus_entry *bus_entry = NULL; > + LIST_HEAD(resources); > int err = 0; > > #ifndef CONFIG_PCI_DOMAINS > @@ -463,16 +471,18 @@ static int pcifront_scan_root(struct pcifront_device *pdev, > dev_info(&pdev->xdev->dev, "Creating PCI Frontend Bus %04x:%02x\n", > domain, bus); > > - bus_entry = kmalloc(sizeof(*bus_entry), GFP_KERNEL); > - sd = kmalloc(sizeof(*sd), GFP_KERNEL); > - if (!bus_entry || !sd) { > + sd = kzalloc(sizeof(*sd), GFP_KERNEL); > + if (!sd) { > err = -ENOMEM; > goto err_out; > } > pcifront_init_sd(sd, domain, bus, pdev); > > - b = pci_scan_bus_parented(&pdev->xdev->dev, bus, > - &pcifront_bus_ops, sd); > + pci_add_resource(&resources, &ioport_resource); > + pci_add_resource(&resources, &iomem_resource); > + pci_add_resource(&resources, &sd->busn_res); > + b = pci_create_root_bus(&pdev->xdev->dev, bus, &pcifront_bus_ops, > + sd, &resources); > if (!b) { > dev_err(&pdev->xdev->dev, > "Error creating PCI Frontend Bus!\n"); > @@ -480,12 +490,14 @@ static int pcifront_scan_root(struct pcifront_device *pdev, > goto err_out; > } > > - bus_entry->bus = b; > + pci_set_host_bridge_release(to_pci_host_bridge(b->bridge), > + pcifront_release_sd, sd); > > - list_add(&bus_entry->list, &pdev->root_buses); > - > - /* pci_scan_bus_parented skips devices which do not have a have > - * devfn==0. The pcifront_scan_bus enumerates all devfn. */ > + /* > + * Every PCI physical device should have function 0, but that's not > + * true for xen. That is incorrect. There are two types of backends - one of them will start at zero, but the other might not. > + * So use pcifront_scan_bus() instead of pci_scan_child_bus(). > + */ > err = pcifront_scan_bus(pdev, domain, bus, b); > > /* Claim resources before going "live" with our devices */ > @@ -497,7 +509,6 @@ static int pcifront_scan_root(struct pcifront_device *pdev, > return err; > > err_out: > - kfree(bus_entry); > kfree(sd); > > return err; > @@ -539,35 +550,19 @@ static int pcifront_rescan_root(struct pcifront_device *pdev, > return err; > } > > -static void free_root_bus_devs(struct pci_bus *bus) > -{ > - struct pci_dev *dev; > - > - while (!list_empty(&bus->devices)) { > - dev = container_of(bus->devices.next, struct pci_dev, > - bus_list); > - dev_dbg(&dev->dev, "removing device\n"); > - pci_stop_and_remove_bus_device(dev); > - } > -} > - > static void pcifront_free_roots(struct pcifront_device *pdev) > { > - struct pci_bus_entry *bus_entry, *t; > + struct pcifront_sd *sd; > + struct pci_bus *bus; > > dev_dbg(&pdev->xdev->dev, "cleaning up root buses\n"); > > - list_for_each_entry_safe(bus_entry, t, &pdev->root_buses, list) { > - list_del(&bus_entry->list); > - > - free_root_bus_devs(bus_entry->bus); > - > - kfree(bus_entry->bus->sysdata); > - > - device_unregister(bus_entry->bus->bridge); > - pci_remove_bus(bus_entry->bus); > - > - kfree(bus_entry); > + for_each_pci_root_bus(bus) { > + sd = bus->sysdata; > + if (sd->pdev == pdev) { > + pci_stop_root_bus(bus); > + pci_remove_root_bus(bus); > + } > } > } > > @@ -670,6 +665,7 @@ static irqreturn_t pcifront_handler_aer(int irq, void *dev) > schedule_pcifront_aer_op(pdev); > return IRQ_HANDLED; > } > + Stray > static int pcifront_connect_and_init_dma(struct pcifront_device *pdev) > { > int err = 0; > @@ -705,6 +701,7 @@ static void pcifront_disconnect(struct pcifront_device *pdev) > > spin_unlock(&pcifront_dev_lock); > } > + Stray > static struct pcifront_device *alloc_pdev(struct xenbus_device *xdev) > { > struct pcifront_device *pdev; > -- > 1.8.1.2 > ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH v2, part3 07/11] PCI, xen-pcifront: use new PCI interfaces to simplify implementation 2013-06-07 14:50 ` Konrad Rzeszutek Wilk @ 2013-06-07 15:17 ` Jiang Liu 2013-06-07 15:38 ` Konrad Rzeszutek Wilk 2013-06-07 15:50 ` Jiang Liu 2 siblings, 0 replies; 12+ messages in thread From: Jiang Liu @ 2013-06-07 15:17 UTC (permalink / raw) To: Konrad Rzeszutek Wilk Cc: Jeremy Fitzhardinge, xen-devel, Toshi Kani, Jiang Liu, Myron Stowe, Greg Kroah-Hartman, linux-kernel, virtualization, Rafael J . Wysocki, Gu Zheng, Yijing Wang, linux-pci, Bjorn Helgaas, Yinghai Lu On Fri 07 Jun 2013 10:50:24 PM CST, Konrad Rzeszutek Wilk wrote: > On Thu, May 16, 2013 at 11:50:55PM +0800, Jiang Liu wrote: >> Use new PCI interfaces to simplify xen-pcifront implementation: >> 1) Use pci_create_root_bus() instead of pci_scan_bus_parented() >> because pci_scan_bus_parented() is marked as __deprecated.This >> also gets rid of a duplicated call of pci_bus_start_devices(). >> 2) Use pci_stop_root_bus() and pci_remove_root_bus() instead of >> open-coded private implementation. >> 3) Use pci_set_host_bridge_release() to release data structures >> associated with PCI root buses. >> 4) Use pci_bus_get()/pci_bus_put() to manage PCI root bus reference >> count. >> >> This is also a preparation for coming PCI bus lock enhancement. >> >> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> >> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> >> Cc: Jeremy Fitzhardinge <jeremy@goop.org> >> Cc: xen-devel@lists.xensource.com >> Cc: virtualization@lists.linux-foundation.org >> Cc: linux-pci@vger.kernel.org >> Cc: linux-kernel@vger.kernel.org >> --- >> drivers/pci/xen-pcifront.c | 81 ++++++++++++++++++++++------------------------ >> 1 file changed, 39 insertions(+), 42 deletions(-) >> >> diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c >> index 816cf94..6aa2c0f 100644 >> --- a/drivers/pci/xen-pcifront.c >> +++ b/drivers/pci/xen-pcifront.c ...... >> @@ -480,12 +490,14 @@ static int pcifront_scan_root(struct pcifront_device *pdev, >> goto err_out; >> } >> >> - bus_entry->bus = b; >> + pci_set_host_bridge_release(to_pci_host_bridge(b->bridge), >> + pcifront_release_sd, sd); >> >> - list_add(&bus_entry->list, &pdev->root_buses); >> - >> - /* pci_scan_bus_parented skips devices which do not have a have >> - * devfn==0. The pcifront_scan_bus enumerates all devfn. */ >> + /* >> + * Every PCI physical device should have function 0, but that's not >> + * true for xen. > > That is incorrect. There are two types of backends - one of them will > start at zero, but the other might not. Hi Konrad, Forgive my poor knowledge about Xen:(, so I will skip this change. Regards! Gerry ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH v2, part3 07/11] PCI, xen-pcifront: use new PCI interfaces to simplify implementation 2013-06-07 14:50 ` Konrad Rzeszutek Wilk 2013-06-07 15:17 ` Jiang Liu @ 2013-06-07 15:38 ` Konrad Rzeszutek Wilk 2013-06-07 16:50 ` Jiang Liu 2013-06-07 15:50 ` Jiang Liu 2 siblings, 1 reply; 12+ messages in thread From: Konrad Rzeszutek Wilk @ 2013-06-07 15:38 UTC (permalink / raw) To: Jiang Liu Cc: Jeremy Fitzhardinge, xen-devel, Toshi Kani, Jiang Liu, Myron Stowe, Greg Kroah-Hartman, linux-kernel, virtualization, Rafael J . Wysocki, Gu Zheng, Yijing Wang, linux-pci, Bjorn Helgaas, Yinghai Lu On Fri, Jun 07, 2013 at 10:50:24AM -0400, Konrad Rzeszutek Wilk wrote: > On Thu, May 16, 2013 at 11:50:55PM +0800, Jiang Liu wrote: > > Use new PCI interfaces to simplify xen-pcifront implementation: > > 1) Use pci_create_root_bus() instead of pci_scan_bus_parented() > > because pci_scan_bus_parented() is marked as __deprecated.This > > also gets rid of a duplicated call of pci_bus_start_devices(). > > 2) Use pci_stop_root_bus() and pci_remove_root_bus() instead of > > open-coded private implementation. > > 3) Use pci_set_host_bridge_release() to release data structures > > associated with PCI root buses. > > 4) Use pci_bus_get()/pci_bus_put() to manage PCI root bus reference > > count. > > > > This is also a preparation for coming PCI bus lock enhancement. With this patch from : Merge branch 'pci_lock_v3' of https://github.com/jiangliu/linux into testing it blows up when detaching the device. Parsing config from /vm-pv-discard.cfg Daemon running with PID 4062 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.0-rc4upstream-00172-g909fe9e-dirty (konrad@phenom.dumpdata.com) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #2 SMP Fri Jun 7 10:55:54 EDT 2013 [ 0.000000] Command line: console=hvc0 debug [ 0.000000] ACPI in unprivileged domain disabled [ 0.000000] Freeing 20000-40000 pfn range: 131072 pages freed [ 0.000000] 1-1 mapping on 20000->100000 [ 0.000000] Released 131072 pages of unused memory [ 0.000000] Set 917504 page(s) to 1-1 mapping [ 0.000000] Populating 100000-120000 pfn range: 131072 pages added [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] Xen: [mem 0x0000000020200000-0x000000003fffffff] unusable [ 0.000000] Xen: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] Xen: [mem 0x0000000040200000-0x00000000c6cd3fff] unusable [ 0.000000] Xen: [mem 0x00000000c6cd4000-0x00000000c6d1cfff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000c6d1d000-0x00000000c6d27fff] ACPI data [ 0.000000] Xen: [mem 0x00000000c6d28000-0x00000000c6d28fff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000c6d29000-0x00000000c6d49fff] reserved [ 0.000000] Xen: [mem 0x00000000c6d4a000-0x00000000c6d4bfff] unusable [ 0.000000] Xen: [mem 0x00000000c6d4c000-0x00000000c6d6cfff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000c6d6d000-0x00000000c6d8ffff] reserved [ 0.000000] Xen: [mem 0x00000000c6d90000-0x00000000c6d9cfff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000c6d9d000-0x00000000c6d9ffff] reserved [ 0.000000] Xen: [mem 0x00000000c6da0000-0x00000000c6db0fff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000c6db1000-0x00000000c6ddcfff] reserved [ 0.000000] Xen: [mem 0x00000000c6ddd000-0x00000000c6e1ffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000c6e20000-0x00000000c6ffffff] unusable [ 0.000000] Xen: [mem 0x00000000c7800000-0x00000000cf9fffff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x000000011fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] e820: last_pfn = 0x20000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x11fe00000-0x11fffffff] [ 0.000000] [mem 0x11fe00000-0x11fffffff] page 4k [ 0.000000] BRK [0x01d8a000, 0x01d8afff] PGTABLE [ 0.000000] BRK [0x01d8b000, 0x01d8bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fdfffff] [ 0.000000] [mem 0x11c000000-0x11fdfffff] page 4k [ 0.000000] BRK [0x01d8c000, 0x01d8cfff] PGTABLE [ 0.000000] BRK [0x01d8d000, 0x01d8dfff] PGTABLE [ 0.000000] BRK [0x01d8e000, 0x01d8efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x1fffffff] page 4k [ 0.000000] RAMDISK: [mem 0x02197000-0x13f67fff] [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff] [ 0.000000] NODE_DATA [mem 0x11fea2000-0x11fea5fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009ffff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x100000000-0x11fffffff] [ 0.000000] On node 0 totalpages: 262047 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1736 pages used for memmap [ 0.000000] DMA32 zone: 126976 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] No local APIC present [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000020200000 - 0000000040000000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 [ 0.000000] PM: Registered nosave memory: 0000000040200000 - 00000000c6cd4000 [ 0.000000] PM: Registered nosave memory: 00000000c6cd4000 - 00000000c6d1d000 [ 0.000000] PM: Registered nosave memory: 00000000c6d1d000 - 00000000c6d28000 [ 0.000000] PM: Registered nosave memory: 00000000c6d28000 - 00000000c6d29000 [ 0.000000] PM: Registered nosave memory: 00000000c6d29000 - 00000000c6d4a000 [ 0.000000] PM: Registered nosave memory: 00000000c6d4a000 - 00000000c6d4c000 [ 0.000000] PM: Registered nosave memory: 00000000c6d4c000 - 00000000c6d6d000 [ 0.000000] PM: Registered nosave memory: 00000000c6d6d000 - 00000000c6d90000 [ 0.000000] PM: Registered nosave memory: 00000000c6d90000 - 00000000c6d9d000 [ 0.000000] PM: Registered nosave memory: 00000000c6d9d000 - 00000000c6da0000 [ 0.000000] PM: Registered nosave memory: 00000000c6da0000 - 00000000c6db1000 [ 0.000000] PM: Registered nosave memory: 00000000c6db1000 - 00000000c6ddd000 [ 0.000000] PM: Registered nosave memory: 00000000c6ddd000 - 00000000c6e20000 [ 0.000000] PM: Registered nosave memory: 00000000c6e20000 - 00000000c7000000 [ 0.000000] PM: Registered nosave memory: 00000000c7000000 - 00000000c7800000 [ 0.000000] PM: Registered nosave memory: 00000000c7800000 - 00000000cfa00000 [ 0.000000] PM: Registered nosave memory: 00000000cfa00000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000 [ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] e820: [mem 0xcfa00000-0xfed1bfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.3-unstable (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011f800000 s85632 r8192 d20864 u1048576 [ 0.000000] pcpu-alloc: s85632 r8192 d20864 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258442 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=hvc0 debug [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 722480k/4718592k available (6698k kernel code, 3670404k absent, 325708k reserved, 4234k data, 1724k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:33024 nr_irqs:288 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [hvc0] enabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Detected 3092.926 MHz processor [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.85 BogoMIPS (lpj=3092926) [ 0.001000] pid_max: default: 32768 minimum: 301 [ 0.001000] Security Framework initialized [ 0.001000] SELinux: Initializing. [ 0.001000] SELinux: Starting in permissive mode [ 0.001000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.001000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.001000] Mount-cache hash table entries: 256 [ 0.001582] Initializing cgroup subsys freezer [ 0.001698] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.001698] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.001708] CPU: Physical Processor ID: 0 [ 0.001712] CPU: Processor Core ID: 0 [ 0.001718] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.001718] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.001718] tlb_flushall_shift: 5 [ 0.025468] cpu 0 spinlock event irq 17 [ 0.025566] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only. [ 0.026081] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.026680] installing Xen timer for CPU 1 [ 0.026723] cpu 1 spinlock event irq 24 [ 0.026793] SMP alternatives: switching to SMP code [ 0.048014] Brought up 2 CPUs [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6cd4000-0xc6d1cfff] (299008 bytes) [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6d28000-0xc6d28fff] (4096 bytes) [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6d4c000-0xc6d6cfff] (135168 bytes) [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6d90000-0xc6d9cfff] (53248 bytes) [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6da0000-0xc6db0fff] (69632 bytes) [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6ddd000-0xc6e1ffff] (274432 bytes) [ 0.051399] kworker/u4:0 (19) used greatest stack depth: 6016 bytes left [ 0.052492] Grant tables using version 2 layout. [ 0.052492] Grant table initialized [ 0.071696] RTC time: 165:165:165, date: 165/165/65 [ 0.071985] NET: Registered protocol family 16 [ 0.072173] kworker/u4:0 (22) used greatest stack depth: 5928 bytes left [ 0.073110] kworker/u4:0 (30) used greatest stack depth: 5464 bytes left [ 0.074030] dca service started, version 1.12.1 [ 0.074563] PCI: setting up Xen PCI frontend stub [ 0.074568] PCI: pci_cache_line_size set to 64 bytes [ 0.101148] bio: create slab <bio-0> at 0 [ 0.101220] ACPI: Interpreter disabled. [ 0.102003] xen/balloon: Initialising balloon driver. [ 0.103081] xen-balloon: Initialising balloon driver. [ 0.104136] vgaarb: loaded [ 0.105135] usbcore: registered new interface driver usbfs [ 0.105135] usbcore: registered new interface driver hub [ 0.105135] usbcore: registered new device driver usb [ 0.106089] pps_core: LinuxPPS API ver. 1 registered [ 0.106089] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.106089] PTP clock support registered [ 0.106089] PCI: System does not support PCI [ 0.106089] PCI: System does not support PCI [ 0.107154] NetLabel: Initializing [ 0.107154] NetLabel: domain hash size = 128 [ 0.107154] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.107175] NetLabel: unlabeled traffic allowed by default [ 0.108087] Switching to clocksource xen [ 0.125349] pnp: PnP ACPI: disabled [ 0.138965] NET: Registered protocol family 2 [ 0.139578] TCP established hash table entries: 8192 (order: 5, 131072 bytes) [ 0.139647] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) [ 0.139668] TCP: Hash tables configured (established 8192 bind 8192) [ 0.193672] TCP: reno registered [ 0.193693] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.193712] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.194030] NET: Registered protocol family 1 [ 0.194380] RPC: Registered named UNIX socket transport module. [ 0.194389] RPC: Registered udp transport module. [ 0.194394] RPC: Registered tcp transport module. [ 0.194398] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.194404] PCI: CLS 0 bytes, default 64 [ 0.194570] Unpacking initramfs... [ 0.778545] Freeing initrd memory: 292676k freed [ 0.823501] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.823855] Machine check injector initialized [ 0.825040] Scanning for low memory corruption every 60 seconds [ 0.826072] audit: initializing netlink socket (disabled) [ 0.826114] type=2000 audit(1370618465.698:1): initialized [ 0.839204] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.839673] VFS: Disk quotas dquot_6.5.2 [ 0.839760] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.840528] NFS: Registering the id_resolver key type [ 0.840553] Key type id_resolver registered [ 0.840558] Key type id_legacy registered [ 0.840587] NTFS driver 2.1.30 [Flags: R/W]. [ 0.840919] msgmni has been set to 1982 [ 0.841082] SELinux: Registering netfilter hooks [ 0.842697] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.842706] io scheduler noop registered [ 0.842710] io scheduler deadline registered [ 0.842772] io scheduler cfq registered (default) [ 0.843309] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.846284] intel_idle: does not run on family 6 model 42 [ 0.846299] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 0.847400] pcifront pci-0: Installing PCI frontend [ 0.847417] Warning: only able to allocate 4 MB for software IO TLB [ 0.850807] software IO TLB [mem 0x109000000-0x109400000] (4MB) mapped at [ffff880109000000-ffff8801093fffff] [ 0.851175] pcifront pci-0: Creating PCI Frontend Bus 0000:00 [ 0.851458] pcifront pci-0: PCI host bridge to bus 0000:00 [ 0.851469] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.851478] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] [ 0.851487] pci_bus 0000:00: root bus resource [bus 00] [ 0.852031] pci 0000:00:00.0: [8086:105e] type 00 class 0x020000 [ 0.852419] pci 0000:00:00.0: reg 0x10: [mem 0xfe4a0000-0xfe4bffff] [ 0.852631] pci 0000:00:00.0: reg 0x14: [mem 0xfe480000-0xfe49ffff] [ 0.852743] pci 0000:00:00.0: reg 0x18: [io 0xe020-0xe03f] [ 0.853905] pcifront pci-0: New device on 0000:00:00.0 found. [ 0.857483] pcifront pci-0: claiming resource 0000:00:00.0/0 [ 0.857490] pcifront pci-0: claiming resource 0000:00:00.0/1 [ 0.857495] pcifront pci-0: claiming resource 0000:00:00.0/2 [ 0.939621] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.942227] Non-volatile memory driver v1.3 [ 0.942414] Linux agpgart interface v0.103 [ 0.943295] [drm] Initialized drm 1.1.0 20060810 [ 0.947952] loop: module loaded [ 0.948577] libphy: Fixed MDIO Bus: probed [ 0.948583] tun: Universal TUN/TAP device driver, 1.6 [ 0.948588] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.948913] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.7.12-k [ 0.948921] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.950031] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.950039] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 0.950061] ehci-pci: EHCI PCI platform driver [ 0.950201] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.950207] ohci_hcd: block sizes: ed 80 td 96 [ 0.950357] uhci_hcd: USB Universal Host Controller Interface driver [ 0.950736] usbcore: registered new interface driver usblp [ 0.951285] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.960646] i8042: No controller found [ 1.960872] mousedev: PS/2 mouse device common for all mice [ 2.021775] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 2.021941] rtc_cmos: probe of rtc_cmos failed with error -38 [ 2.023233] zram: Created 1 device(s) ... [ 2.023567] Netfilter messages via NETLINK v0.30. [ 2.023612] nf_conntrack version 0.5.0 (7930 buckets, 31720 max) [ 2.023775] ctnetlink v0.93: registering with nfnetlink. [ 2.024045] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.024170] TCP: cubic registered [ 2.024177] Initializing XFRM netlink socket [ 2.024379] NET: Registered protocol family 10 [ 2.024936] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.025259] sit: IPv6 over IPv4 tunneling driver [ 2.026039] NET: Registered protocol family 17 [ 2.026320] Key type dns_resolver registered [ 2.026874] PM: Hibernation image not present or could not be loaded. [ 2.026922] registered taskstats version 1 [ 2.027005] kmemleak: Kernel memory leak detector initialized [ 2.027009] kmemleak: Automatic memory scanning thread started [ 2.027437] XENBUS: Device with no driver: device/vbd/51712 [ 2.027537] Magic number: 1:252:3141 [ 2.029169] Freeing unused kernel memory: 1724k freed [ 2.029408] Write protecting the kernel read-only data: 10240k [ 2.033649] Freeing unused kernel memory: 1480k freed [ 2.033908] Freeing unused kernel memory: 72k freed init started: BusyBox v1.14.3 (2013-06-07 10:58:39 EDT) [ 2.040621] consoletype (1038) used greatest stack depth: 5304 bytes left Mounting directories [ OK ] [ 2.059689] chmod (1044) used greatest stack depth: 4856 bytes left mount: mount point /proc/bus/usb does not exist mount: mount point /sys/kernel/config does not exist [ 2.266374] Initialising Xen virtual ethernet driver. [ 2.273190] vbd vbd-51712: blkfront:blkback_changed to state 2. [ 2.283349] vbd vbd-51712: blkfront:blkback_changed to state 4. [ 2.283356] vbd vbd-51712: blkfront_connect:/local/domain/0/backend/vbd/2/51712. [ 2.287707] blkfront: xvda: flush diskcache: enabled; persistent grants: enabled; indirect descriptors: enabled; [ 2.288337] Entered do_blkif_request [ 2.288344] Entered do_blkif_request [ 2.288821] Entered do_blkif_request [ 2.288829] do_blk_req ffff880108ec9e10: cmd ffff880108ec9f00, sec 0, (4/4) buffer:ffff880108ee6000 [read] [ 2.288839] Entered do_blkif_request [ 2.288859] Entered do_blkif_request [ 2.288864] do_blk_req ffff880108ec9cb8: cmd ffff880108ec9da8, sec 4, (4/4) buffer:ffff880108ee6800 [read] [ 2.288871] Entered do_blkif_request [ 2.292721] Entered do_blkif_request [ 2.292727] Entered do_blkif_request [ 2.292737] Entered do_blkif_request [ 2.292741] Entered do_blkif_request [ 2.292780] Entered do_blkif_request [ 2.292786] do_blk_req ffff880108ec9cb8: cmd ffff880108ec9da8, sec 8, (4/4) buffer:ffff88010f273000 [read] [ 2.292794] Entered do_blkif_request [ 2.292811] Entered do_blkif_request [ 2.292816] do_blk_req ffff880108ec9e10: cmd ffff880108ec9f00, sec c, (4/4) buffer:ffff88010f273800 [read] [ 2.292822] Entered do_blkif_request [ 2.292940] Entered do_blkif_request [ 2.292947] Entered do_blkif_request [ 2.292957] Entered do_blkif_request [ 2.292961] Entered do_blkif_request [ 2.292974] xvda: unknown partition table [ 2.385804] udevd (1099): /proc/1099/oom_adj is deprecated, please use /proc/1099/oom_score_adj instead. [ 2.444038] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 2.444061] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 2.444110] e1000e 0000:00:00.0: Disabling ASPM L1 [ 2.444232] e1000e 0000:00:00.0: enabling device (0000 -> 0002) [ 2.447244] e1000e 0000:00:00.0: Xen PCI mapped GSI16 to IRQ34 [ 2.447790] e1000e 0000:00:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode udevd-work[1106]: error opening ATTR{/sys/devices/system/cpu/cpu0/online} for writing: No such file or directory [ 2.459644] vbd vbd-51712: command: 0x5331, argument: 0x0 [ 2.560213] ip (1325) used greatest stack depth: 3760 bytes left [ 2.624581] e1000e 0000:00:00.0 eth0: (PCI Express:2.5GT/s:Width x4) 00:15:17:8f:18:a2 [ 2.624595] e1000e 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.624675] e1000e 0000:00:00.0 eth0: MAC: 0, PHY: 4, PBA No: D50868-003 Waiting for devices [ OK ] Waiting for fb [ OK ] Starting..[/dev/fb0] Could not open; err: 2 FATAL: Module agpgart_intel not found. [ 2.814571] [drm] radeon kernel modesetting enabled. WARNING: Error inserting video (/lib/modules/3.10.0-rc4upstream-00172-g909fe9e-dirty/kernel/drivers/acpi/video.ko): No such device WARNING: Error inserting mxm_wmi (/lib/modules/3.10.0-rc4upstream-00172-g909fe9e-dirty/kernel/drivers/platform/x86/mxm-wmi.ko): No such device WARNING: Error inserting drm_kms_helper (/lib/modules/3.10.0-rc4upstream-00172-g909fe9e-dirty/kernel/drivers/gpu/drm/drm_kms_helper.ko): No such device WARNING: Error inserting ttm (/lib/modules/3.10.0-rc4upstream-00172-g909fe9e-dirty/kernel/drivers/gpu/drm/ttm/ttm.ko): No such device FATAL: Error inserting nouveau (/lib/modules/3.10.0-rc4upstream-00172-g909fe9e-dirty/kernel/drivers/gpu/drm/nouveau/nouveau.ko): No such device WARNING: Error inserting drm_kms_helper (/lib/modules/3.10.0-rc4upstream-00172-g909fe9e-dirty/kernel/drivers/gpu/drm/drm_kms_helper.ko): No such device FATAL: Error inserting i915 (/lib/modules/3.10.0-rc4upstream-00172-g909fe9e-dirty/kernel/drivers/gpu/drm/i915/i915.ko): No such device Starting..[/dev/fb0] Could not open; err: 2 VGA: 0000: Waiting for network [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ 3.394987] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.397647] device eth0 entered promiscuous mode [ OK ] Bringing up interface switch: Determining IP information for switch...[ 3.452997] IPv6: ADDRCONF(NETDEV_UP): switch: link is not ready [ 5.533965] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 5.534117] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 5.534222] switch: port 1(eth0) entered forwarding state [ 5.534239] switch: port 1(eth0) entered forwarding state [ 5.534302] IPv6: ADDRCONF(NETDEV_CHANGE): switch: link becomes ready done. [ OK ] Waiting for init.custom [ OK ] Starting SSHd ... SSH started [2202] Waiting for SSHd [ OK ] WARNING: ssh currently running [2202] ignoring start request FATAL: Module dump_dma not found. ERROR: Module dump_dma does not exist in /proc/modules [ 9.129856] SCSI subsystem initialized [ 9.131318] Loading iSCSI transport class v2.0-870. [ 9.134894] iscsi: registered transport (tcp) hostname: Name or service not known iscsistart: transport class version 2.0-870. iscsid version 2.0-872 Could not get list of targets from firmware. Jun 7 15:21:14 (none) syslogd 1.5.0: restart. Running in PV context on Xen v4.3. FATAL: Module evtchn not found. [ 9.176036] Event-channel device installed. 00:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) CPU0 CPU1 16: 2600 0 xen-percpu-virq timer0 17: 0 0 xen-percpu-ipi spinlock0 18: 3473 0 xen-percpu-ipi resched0 19: 0 0 xen-percpu-ipi callfunc0 20: 0 0 xen-percpu-virq debug0 21: 237 0 xen-percpu-ipi callfuncsingle0 22: 0 0 xen-percpu-ipi irqwork0 23: 0 2560 xen-percpu-virq timer1 24: 0 0 xen-percpu-ipi spinlock1 25: 0 3833 xen-percpu-ipi resched1 26: 0 0 xen-percpu-ipi callfunc1 27: 0 0 xen-percpu-virq debug1 28: 0 271 xen-percpu-ipi callfuncsingle1 29: 0 0 xen-percpu-ipi irqwork1 30: 235 0 xen-dyn-event xenbus 31: 64 0 xen-dyn-event pcifront 32: 89 0 xen-dyn-event hvc_console 33: 4 0 xen-dyn-event blkif 35: 27 0 xen-pirq-pcifront-msi eth0 NMI: 0 0 Non-maskable interrupts LOC: 0 0 Local timer interrupts SPU: 0 0 Spurious interrupts PMI: 0 0 Performance monitoring interrupts IWI: 0 0 IRQ work interrupts RTR: 0 0 APIC ICR read retries RES: 3473 3833 Rescheduling interrupts CAL: 237 271 Function call interrupts TLB: 0 0 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts MCE: 0 0 Machine check exceptions MCP: 0 0 Machine check polls ERR: 0 MIS: 0 00000000-00000fff : reserved 00001000-0009ffff : System RAM 000a0000-000fffff : reserved 000f0000-000fffff : System ROM 00100000-1fffffff : System RAM 01000000-0168a927 : Kernel code 0168a928-01aad2bf : Kernel data 01c65000-01d74fff : Kernel bss 20200000-3fffffff : Unusable memory 40200000-c6cd3fff : Unusable memory c6cd4000-c6d1cfff : ACPI Non-volatile Storage c6d1d000-c6d27fff : ACPI Tables c6d28000-c6d28fff : ACPI Non-volatile Storage c6d4a000-c6d4bfff : Unusable memory c6d4c000-c6d6cfff : ACPI Non-volatile Storage c6d90000-c6d9cfff : ACPI Non-volatile Storage c6da0000-c6db0fff : ACPI Non-volatile Storage c6ddd000-c6e1ffff : ACPI Non-volatile Storage c6e20000-c6ffffff : Unusable memory fe480000-fe49ffff : 0000:00:00.0 fe480000-fe49ffff : e1000e fe4a0000-fe4bffff : 0000:00:00.0 fe4a0000-fe4bffff : e1000e 100000000-11fffffff : System RAM MemTotal: 1018432 kB MemFree: 641536 kB Buffers: 0 kB Cached: 310180 kB SwapCached: 0 kB Active: 19368 kB Inactive: 290652 kB Active(anon): 13120 kB Inactive(anon): 84540 kB Active(file): 6248 kB Inactive(file): 206112 kB Unevictable: 4940 kB Mlocked: 4940 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 4684 kB Mapped: 5152 kB Shmem: 94284 kB Slab: 45924 kB SReclaimable: 12804 kB SUnreclaim: 33120 kB KernelStack: 432 kB PageTables: 692 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 509216 kB Committed_AS: 102792 kB VmallocTotal: 34359738367 kB VmallocUsed: 2332 kB VmallocChunk: 34359735931 kB AnonHugePages: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 1048576 kB DirectMap2M: 0 kB Waiting for init.late [ OK ] PING build.dumpdata.com (192.168.102.1) 56(84) bytes of data. --- build.dumpdata.com ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.208/0.208/0.208/0.000 ms [ 9.336320] mount.nfs (2304) used greatest stack depth: 3320 bytes left mount.nfs: access denied by server while mounting build:/srv/results NFS done /init.late: line 13: can't create /mnt/results/dmesg/(none)-3.10.0-rc4upstream-00172-g909fe9e-dirty.dmesg: nonexistent directory [0x0->0x20000] pfn [0x0->0x20000] level entry [0x20000->0x100000] identity [0x20000->0x100000] level middle [0x100000->0x120000] pfn [0x100000->0x120000] level entry [0x120000->0x140000] level middle [0x120000->0x7cfffff] missing [0x140000->0x7cfffff] level top /init.late: line 17: can't create /mnt/results/p2m/(none)-3.10.0-rc4upstream-00172-g909fe9e-dirty.p2m: nonexistent directory libxl: error: libxl.c:87:libxl_ctx_alloc: Is xenstore daemon running? failed to stat /var/run/xenstored.pid: No such file or directory cannot init xl context [ 9.669091] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 9.670252] device-mapper: multipath: version 1.5.1 loaded PING 192.168.101.2 (192.168.101.2) 56(84) bytes of data. kill -1 1 --- 192.168.101.2 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 10000ms /init.late: line 34: boot_parameter: not found [ 20.576092] switch: port 1(eth0) entered forwarding state 7 Jun 15:21:27 ntpdate[2323]: adjust time server 17.171.4.15 offset -0.265117 sec Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. Fri Jun 7 15:21:27 UTC 2013 Jun 7 15:21:27 (none) init: starting pid 2333, tty '/dev/tty0': '/bin/sh' Jun 7 15:21:27 (none) init: starting pid 2334, tty '/dev/tty1': '/bin/sh' Jun 7 15:21:27 (none) init: starting pid 2335, tty '/dev/ttyS0': '/bin/sh' Jun 7 15:21:27 (none) init: starting pid 2336, tty '/dev/hvc0': '/bin/sh' BusyBox v1.14.3 (2013-06-07 10:58:39 EDT) built-in shell (ash) Enter 'help' for a list of built-in commands. # kill -1 1 # Jun 7 15:21:27 (none) init: reloading /etc/inittab # m\b \bdmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.0-rc4upstream-00172-g909fe9e-dirty (konrad@phenom.dumpdata.com) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #2 SMP Fri Jun 7 10:55:54 EDT 2013 [ 0.000000] Command line: console=hvc0 debug [ 0.000000] ACPI in unprivileged domain disabled [ 0.000000] Freeing 20000-40000 pfn range: 131072 pages freed [ 0.000000] 1-1 mapping on 20000->100000 [ 0.000000] Released 131072 pages of unused memory [ 0.000000] Set 917504 page(s) to 1-1 mapping [ 0.000000] Populating 100000-120000 pfn range: 131072 pages added [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] Xen: [mem 0x0000000020200000-0x000000003fffffff] unusable [ 0.000000] Xen: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] Xen: [mem 0x0000000040200000-0x00000000c6cd3fff] unusable [ 0.000000] Xen: [mem 0x00000000c6cd4000-0x00000000c6d1cfff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000c6d1d000-0x00000000c6d27fff] ACPI data [ 0.000000] Xen: [mem 0x00000000c6d28000-0x00000000c6d28fff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000c6d29000-0x00000000c6d49fff] reserved [ 0.000000] Xen: [mem 0x00000000c6d4a000-0x00000000c6d4bfff] unusable [ 0.000000] Xen: [mem 0x00000000c6d4c000-0x00000000c6d6cfff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000c6d6d000-0x00000000c6d8ffff] reserved [ 0.000000] Xen: [mem 0x00000000c6d90000-0x00000000c6d9cfff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000c6d9d000-0x00000000c6d9ffff] reserved [ 0.000000] Xen: [mem 0x00000000c6da0000-0x00000000c6db0fff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000c6db1000-0x00000000c6ddcfff] reserved [ 0.000000] Xen: [mem 0x00000000c6ddd000-0x00000000c6e1ffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000c6e20000-0x00000000c6ffffff] unusable [ 0.000000] Xen: [mem 0x00000000c7800000-0x00000000cf9fffff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x000000011fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] e820: last_pfn = 0x20000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x11fe00000-0x11fffffff] [ 0.000000] [mem 0x11fe00000-0x11fffffff] page 4k [ 0.000000] BRK [0x01d8a000, 0x01d8afff] PGTABLE [ 0.000000] BRK [0x01d8b000, 0x01d8bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fdfffff] [ 0.000000] [mem 0x11c000000-0x11fdfffff] page 4k [ 0.000000] BRK [0x01d8c000, 0x01d8cfff] PGTABLE [ 0.000000] BRK [0x01d8d000, 0x01d8dfff] PGTABLE [ 0.000000] BRK [0x01d8e000, 0x01d8efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x1fffffff] page 4k [ 0.000000] RAMDISK: [mem 0x02197000-0x13f67fff] [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff] [ 0.000000] NODE_DATA [mem 0x11fea2000-0x11fea5fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009ffff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x100000000-0x11fffffff] [ 0.000000] On node 0 totalpages: 262047 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1736 pages used for memmap [ 0.000000] DMA32 zone: 126976 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] No local APIC present [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000020200000 - 0000000040000000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 [ 0.000000] PM: Registered nosave memory: 0000000040200000 - 00000000c6cd4000 [ 0.000000] PM: Registered nosave memory: 00000000c6cd4000 - 00000000c6d1d000 [ 0.000000] PM: Registered nosave memory: 00000000c6d1d000 - 00000000c6d28000 [ 0.000000] PM: Registered nosave memory: 00000000c6d28000 - 00000000c6d29000 [ 0.000000] PM: Registered nosave memory: 00000000c6d29000 - 00000000c6d4a000 [ 0.000000] PM: Registered nosave memory: 00000000c6d4a000 - 00000000c6d4c000 [ 0.000000] PM: Registered nosave memory: 00000000c6d4c000 - 00000000c6d6d000 [ 0.000000] PM: Registered nosave memory: 00000000c6d6d000 - 00000000c6d90000 [ 0.000000] PM: Registered nosave memory: 00000000c6d90000 - 00000000c6d9d000 [ 0.000000] PM: Registered nosave memory: 00000000c6d9d000 - 00000000c6da0000 [ 0.000000] PM: Registered nosave memory: 00000000c6da0000 - 00000000c6db1000 [ 0.000000] PM: Registered nosave memory: 00000000c6db1000 - 00000000c6ddd000 [ 0.000000] PM: Registered nosave memory: 00000000c6ddd000 - 00000000c6e20000 [ 0.000000] PM: Registered nosave memory: 00000000c6e20000 - 00000000c7000000 [ 0.000000] PM: Registered nosave memory: 00000000c7000000 - 00000000c7800000 [ 0.000000] PM: Registered nosave memory: 00000000c7800000 - 00000000cfa00000 [ 0.000000] PM: Registered nosave memory: 00000000cfa00000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000 [ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] e820: [mem 0xcfa00000-0xfed1bfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.3-unstable (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011f800000 s85632 r8192 d20864 u1048576 [ 0.000000] pcpu-alloc: s85632 r8192 d20864 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258442 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=hvc0 debug [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 722480k/4718592k available (6698k kernel code, 3670404k absent, 325708k reserved, 4234k data, 1724k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:33024 nr_irqs:288 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [hvc0] enabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Detected 3092.926 MHz processor [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.85 BogoMIPS (lpj=3092926) [ 0.001000] pid_max: default: 32768 minimum: 301 [ 0.001000] Security Framework initialized [ 0.001000] SELinux: Initializing. [ 0.001000] SELinux: Starting in permissive mode [ 0.001000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.001000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.001000] Mount-cache hash table entries: 256 [ 0.001582] Initializing cgroup subsys freezer [ 0.001698] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.001698] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.001708] CPU: Physical Processor ID: 0 [ 0.001712] CPU: Processor Core ID: 0 [ 0.001718] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.001718] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.001718] tlb_flushall_shift: 5 [ 0.025468] cpu 0 spinlock event irq 17 [ 0.025566] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only. [ 0.026081] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.026680] installing Xen timer for CPU 1 [ 0.026723] cpu 1 spinlock event irq 24 [ 0.026793] SMP alternatives: switching to SMP code [ 0.048014] Brought up 2 CPUs [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6cd4000-0xc6d1cfff] (299008 bytes) [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6d28000-0xc6d28fff] (4096 bytes) [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6d4c000-0xc6d6cfff] (135168 bytes) [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6d90000-0xc6d9cfff] (53248 bytes) [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6da0000-0xc6db0fff] (69632 bytes) [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6ddd000-0xc6e1ffff] (274432 bytes) [ 0.051399] kworker/u4:0 (19) used greatest stack depth: 6016 bytes left [ 0.052492] Grant tables using version 2 layout. [ 0.052492] Grant table initialized [ 0.071696] RTC time: 165:165:165, date: 165/165/65 [ 0.071985] NET: Registered protocol family 16 [ 0.072173] kworker/u4:0 (22) used greatest stack depth: 5928 bytes left [ 0.073110] kworker/u4:0 (30) used greatest stack depth: 5464 bytes left [ 0.074030] dca service started, version 1.12.1 [ 0.074563] PCI: setting up Xen PCI frontend stub [ 0.074568] PCI: pci_cache_line_size set to 64 bytes [ 0.101148] bio: create slab <bio-0> at 0 [ 0.101220] ACPI: Interpreter disabled. [ 0.102003] xen/balloon: Initialising balloon driver. [ 0.103081] xen-balloon: Initialising balloon driver. [ 0.104136] vgaarb: loaded [ 0.105135] usbcore: registered new interface driver usbfs [ 0.105135] usbcore: registered new interface driver hub [ 0.105135] usbcore: registered new device driver usb [ 0.106089] pps_core: LinuxPPS API ver. 1 registered [ 0.106089] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.106089] PTP clock support registered [ 0.106089] PCI: System does not support PCI [ 0.106089] PCI: System does not support PCI [ 0.107154] NetLabel: Initializing [ 0.107154] NetLabel: domain hash size = 128 [ 0.107154] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.107175] NetLabel: unlabeled traffic allowed by default [ 0.108087] Switching to clocksource xen [ 0.125349] pnp: PnP ACPI: disabled [ 0.138965] NET: Registered protocol family 2 [ 0.139578] TCP established hash table entries: 8192 (order: 5, 131072 bytes) [ 0.139647] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) [ 0.139668] TCP: Hash tables configured (established 8192 bind 8192) [ 0.193672] TCP: reno registered [ 0.193693] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.193712] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.194030] NET: Registered protocol family 1 [ 0.194380] RPC: Registered named UNIX socket transport module. [ 0.194389] RPC: Registered udp transport module. [ 0.194394] RPC: Registered tcp transport module. [ 0.194398] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.194404] PCI: CLS 0 bytes, default 64 [ 0.194570] Unpacking initramfs... [ 0.778545] Freeing initrd memory: 292676k freed [ 0.823501] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.823855] Machine check injector initialized [ 0.825040] Scanning for low memory corruption every 60 seconds [ 0.826072] audit: initializing netlink socket (disabled) [ 0.826114] type=2000 audit(1370618465.698:1): initialized [ 0.839204] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.839673] VFS: Disk quotas dquot_6.5.2 [ 0.839760] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.840528] NFS: Registering the id_resolver key type [ 0.840553] Key type id_resolver registered [ 0.840558] Key type id_legacy registered [ 0.840587] NTFS driver 2.1.30 [Flags: R/W]. [ 0.840919] msgmni has been set to 1982 [ 0.841082] SELinux: Registering netfilter hooks [ 0.842697] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.842706] io scheduler noop registered [ 0.842710] io scheduler deadline registered [ 0.842772] io scheduler cfq registered (default) [ 0.843309] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.846284] intel_idle: does not run on family 6 model 42 [ 0.846299] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 0.847400] pcifront pci-0: Installing PCI frontend [ 0.847417] Warning: only able to allocate 4 MB for software IO TLB [ 0.850807] software IO TLB [mem 0x109000000-0x109400000] (4MB) mapped at [ffff880109000000-ffff8801093fffff] [ 0.851175] pcifront pci-0: Creating PCI Frontend Bus 0000:00 [ 0.851458] pcifront pci-0: PCI host bridge to bus 0000:00 [ 0.851469] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.851478] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] [ 0.851487] pci_bus 0000:00: root bus resource [bus 00] [ 0.852031] pci 0000:00:00.0: [8086:105e] type 00 class 0x020000 [ 0.852419] pci 0000:00:00.0: reg 0x10: [mem 0xfe4a0000-0xfe4bffff] [ 0.852631] pci 0000:00:00.0: reg 0x14: [mem 0xfe480000-0xfe49ffff] [ 0.852743] pci 0000:00:00.0: reg 0x18: [io 0xe020-0xe03f] [ 0.853905] pcifront pci-0: New device on 0000:00:00.0 found. [ 0.857483] pcifront pci-0: claiming resource 0000:00:00.0/0 [ 0.857490] pcifront pci-0: claiming resource 0000:00:00.0/1 [ 0.857495] pcifront pci-0: claiming resource 0000:00:00.0/2 [ 0.939621] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.942227] Non-volatile memory driver v1.3 [ 0.942414] Linux agpgart interface v0.103 [ 0.943295] [drm] Initialized drm 1.1.0 20060810 [ 0.947952] loop: module loaded [ 0.948577] libphy: Fixed MDIO Bus: probed [ 0.948583] tun: Universal TUN/TAP device driver, 1.6 [ 0.948588] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.948913] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.7.12-k [ 0.948921] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.950031] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.950039] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 0.950061] ehci-pci: EHCI PCI platform driver [ 0.950201] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.950207] ohci_hcd: block sizes: ed 80 td 96 [ 0.950357] uhci_hcd: USB Universal Host Controller Interface driver [ 0.950736] usbcore: registered new interface driver usblp [ 0.951285] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.960646] i8042: No controller found [ 1.960872] mousedev: PS/2 mouse device common for all mice [ 2.021775] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 2.021941] rtc_cmos: probe of rtc_cmos failed with error -38 [ 2.023233] zram: Created 1 device(s) ... [ 2.023567] Netfilter messages via NETLINK v0.30. [ 2.023612] nf_conntrack version 0.5.0 (7930 buckets, 31720 max) [ 2.023775] ctnetlink v0.93: registering with nfnetlink. [ 2.024045] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.024170] TCP: cubic registered [ 2.024177] Initializing XFRM netlink socket [ 2.024379] NET: Registered protocol family 10 [ 2.024936] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.025259] sit: IPv6 over IPv4 tunneling driver [ 2.026039] NET: Registered protocol family 17 [ 2.026320] Key type dns_resolver registered [ 2.026874] PM: Hibernation image not present or could not be loaded. [ 2.026922] registered taskstats version 1 [ 2.027005] kmemleak: Kernel memory leak detector initialized [ 2.027009] kmemleak: Automatic memory scanning thread started [ 2.027437] XENBUS: Device with no driver: device/vbd/51712 [ 2.027537] Magic number: 1:252:3141 [ 2.029169] Freeing unused kernel memory: 1724k freed [ 2.029408] Write protecting the kernel read-only data: 10240k [ 2.033649] Freeing unused kernel memory: 1480k freed [ 2.033908] Freeing unused kernel memory: 72k freed [ 2.040621] consoletype (1038) used greatest stack depth: 5304 bytes left [ 2.059689] chmod (1044) used greatest stack depth: 4856 bytes left [ 2.266374] Initialising Xen virtual ethernet driver. [ 2.273190] vbd vbd-51712: blkfront:blkback_changed to state 2. [ 2.283349] vbd vbd-51712: blkfront:blkback_changed to state 4. [ 2.283356] vbd vbd-51712: blkfront_connect:/local/domain/0/backend/vbd/2/51712. [ 2.287707] blkfront: xvda: flush diskcache: enabled; persistent grants: enabled; indirect descriptors: enabled; [ 2.288337] Entered do_blkif_request [ 2.288344] Entered do_blkif_request [ 2.288821] Entered do_blkif_request [ 2.288829] do_blk_req ffff880108ec9e10: cmd ffff880108ec9f00, sec 0, (4/4) buffer:ffff880108ee6000 [read] [ 2.288839] Entered do_blkif_request [ 2.288859] Entered do_blkif_request [ 2.288864] do_blk_req ffff880108ec9cb8: cmd ffff880108ec9da8, sec 4, (4/4) buffer:ffff880108ee6800 [read] [ 2.288871] Entered do_blkif_request [ 2.292721] Entered do_blkif_request [ 2.292727] Entered do_blkif_request [ 2.292737] Entered do_blkif_request [ 2.292741] Entered do_blkif_request [ 2.292780] Entered do_blkif_request [ 2.292786] do_blk_req ffff880108ec9cb8: cmd ffff880108ec9da8, sec 8, (4/4) buffer:ffff88010f273000 [read] [ 2.292794] Entered do_blkif_request [ 2.292811] Entered do_blkif_request [ 2.292816] do_blk_req ffff880108ec9e10: cmd ffff880108ec9f00, sec c, (4/4) buffer:ffff88010f273800 [read] [ 2.292822] Entered do_blkif_request [ 2.292940] Entered do_blkif_request [ 2.292947] Entered do_blkif_request [ 2.292957] Entered do_blkif_request [ 2.292961] Entered do_blkif_request [ 2.292974] xvda: unknown partition table [ 2.385804] udevd (1099): /proc/1099/oom_adj is deprecated, please use /proc/1099/oom_score_adj instead. [ 2.444038] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 2.444061] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 2.444110] e1000e 0000:00:00.0: Disabling ASPM L1 [ 2.444232] e1000e 0000:00:00.0: enabling device (0000 -> 0002) [ 2.447244] e1000e 0000:00:00.0: Xen PCI mapped GSI16 to IRQ34 [ 2.447790] e1000e 0000:00:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.459644] vbd vbd-51712: command: 0x5331, argument: 0x0 [ 2.560213] ip (1325) used greatest stack depth: 3760 bytes left [ 2.624581] e1000e 0000:00:00.0 eth0: (PCI Express:2.5GT/s:Width x4) 00:15:17:8f:18:a2 [ 2.624595] e1000e 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.624675] e1000e 0000:00:00.0 eth0: MAC: 0, PHY: 4, PBA No: D50868-003 [ 2.814571] [drm] radeon kernel modesetting enabled. [ 3.394987] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.397647] device eth0 entered promiscuous mode [ 3.452997] IPv6: ADDRCONF(NETDEV_UP): switch: link is not ready [ 5.533965] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 5.534117] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 5.534222] switch: port 1(eth0) entered forwarding state [ 5.534239] switch: port 1(eth0) entered forwarding state [ 5.534302] IPv6: ADDRCONF(NETDEV_CHANGE): switch: link becomes ready [ 9.129856] SCSI subsystem initialized [ 9.131318] Loading iSCSI transport class v2.0-870. [ 9.134894] iscsi: registered transport (tcp) [ 9.176036] Event-channel device installed. [ 9.336320] mount.nfs (2304) used greatest stack depth: 3320 bytes left [ 9.669091] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 9.670252] device-mapper: multipath: version 1.5.1 loaded [ 20.576092] switch: port 1(eth0) entered forwarding state # lspci 00:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) # ifconfig eth0 Link encap:Ethernet HWaddr 00:15:17:8F:18:A2 inet6 addr: fe80::215:17ff:fe8f:18a2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:116 errors:0 dropped:0 overruns:0 frame:0 TX packets:141 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:12017 (11.7 KiB) TX bytes:13404 (13.0 KiB) Interrupt:34 Memory:fe4a0000-fe4c0000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:520 (520.0 b) TX bytes:520 (520.0 b) switch Link encap:Ethernet HWaddr 00:15:17:8F:18:A2 inet addr:192.168.102.210 Bcast:192.168.102.255 Mask:255.255.255.0 inet6 addr: fe80::215:17ff:fe8f:18a2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:116 errors:0 dropped:0 overruns:0 frame:0 TX packets:134 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:9929 (9.6 KiB) TX bytes:12244 (11.9 KiB) # eth\b\b\b # ethtool ^[[J-i eth0 driver: e1000e version: 2.3.2-k firmware-version: 5.11-2 bus-info: 0000:00:00.0 # rmmod e1000e [ 39.032406] switch: port 1(eth0) entered disabled state [ 39.032576] device eth0 left promiscuous mode [ 39.032583] switch: port 1(eth0) entered disabled state # miod\b \b\b \b\b \bodprobe e1000e [ 42.614015] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 42.614026] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 42.614080] e1000e 0000:00:00.0: Disabling ASPM L1 [ 42.614172] xen_map_pirq_gsi: returning irq 34 for gsi 16 [ 42.614181] e1000e 0000:00:00.0: Xen PCI mapped GSI16 to IRQ34 [ 42.615024] e1000e 0000:00:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 42.790351] e1000e 0000:00:00.0 eth0: (PCI Express:2.5GT/s:Width x4) 00:15:17:8f:18:a2 [ 42.790363] e1000e 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 42.790448] e1000e 0000:00:00.0 eth0: MAC: 0, PHY: 4, PBA No: D50868-003 # [ 43.103936] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 43.106574] device eth0 entered promiscuous mode rmmod e100[ 45.190968] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 45.191117] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 45.191210] switch: port 1(eth0) entered forwarding state [ 45.191227] switch: port 1(eth0) entered forwarding state 0e [ 46.621376] switch: port 1(eth0) entered disabled state [ 46.621538] device eth0 left promiscuous mode [ 46.621547] switch: port 1(eth0) entered disabled state # DETACHING HERE.. # # [ 53.802739] pcifront pci-0: Rescanning PCI Frontend Bus 0000:00 [ 53.887894] pci_bus 0000:00: busn_res: [bus 00] is released [ 53.888042] ------------[ cut here ]------------ [ 53.888055] WARNING: at /home/konrad/linux/include/linux/kref.h:47 klist_iter_init_node+0x3e/0x50() [ 53.888073] Modules linked in: dm_multipath dm_mod xen_evtchn iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi scsi_mod libcrc32c crc32c radeon fbcon tileblit font bitblit softcursor ttm drm_kms_helper crc32c_intel xen_blkfront xen_netfront xen_fbfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_kbdfront xenfs xen_privcmd [last unloaded: e1000e] [ 53.888151] CPU: 1 PID: 26 Comm: xenwatch Not tainted 3.10.0-rc4upstream-00172-g909fe9e-dirty #2 [ 53.888158] ffffffff819392b8 ffff88011e3c1b88 ffffffff8167a27d ffff88011e3c1bc8 [ 53.888171] ffffffff8108d1eb ffff880109536a00 ffff88011e3c1c18 0000000000000000 [ 53.888186] ffffffff8131c410 0000000000000000 ffff88011e3c1e70 ffff88011e3c1bd8 [ 53.888197] Call Trace: [ 53.888203] [<ffffffff8167a27d>] dump_stack+0x19/0x1b [ 53.888212] [<ffffffff8108d1eb>] warn_slowpath_common+0x6b/0xa0 [ 53.888220] [<ffffffff8131c410>] ? pci_match_next_bus+0x10/0x10 [ 53.888227] [<ffffffff8108d235>] warn_slowpath_null+0x15/0x20 [ 53.888234] [<ffffffff81663b4e>] klist_iter_init_node+0x3e/0x50 [ 53.888242] [<ffffffff8142117d>] class_dev_iter_init+0x3d/0x50 [ 53.888248] [<ffffffff81421348>] class_find_device+0x38/0xb0 [ 53.888255] [<ffffffff8131c8aa>] pci_get_next_root_bus+0x4a/0x80 [ 53.888262] [<ffffffff8132f6a5>] pcifront_free_roots+0x25/0x60 [ 53.888268] [<ffffffff8132f6f1>] free_pdev+0x11/0x80 [ 53.888274] [<ffffffff8132f77a>] pcifront_xenbus_remove+0x1a/0x20 [ 53.888283] [<ffffffff813abae8>] xenbus_dev_remove+0x38/0x70 [ 53.888289] [<ffffffff8141ffc1>] __device_release_driver+0x61/0xd0 [ 53.888296] [<ffffffff81420148>] device_release_driver+0x28/0x40 [ 53.888302] [<ffffffff8141f296>] bus_remove_device+0x106/0x140 [ 53.888310] [<ffffffff8141d120>] device_del+0x110/0x1c0 [ 53.888316] [<ffffffff8141d1e1>] device_unregister+0x11/0x20 [ 53.888323] [<ffffffff813ab946>] xenbus_dev_changed+0x96/0x1d0 [ 53.888331] [<ffffffff81048bd6>] ? xen_spin_lock+0xa6/0x110 [ 53.888338] [<ffffffff813ad2f6>] frontend_changed+0x16/0x20 [ 53.888345] [<ffffffff813a9c5b>] xenwatch_thread+0xcb/0x190 [ 53.888352] [<ffffffff810b49d0>] ? wake_up_bit+0x40/0x40 [ 53.888359] [<ffffffff813a9b90>] ? xs_watch+0x60/0x60 [ 53.888365] [<ffffffff810b42e6>] kthread+0xc6/0xd0 [ 53.888371] [<ffffffff8103a149>] ? xen_end_context_switch+0x19/0x20 [ 53.888378] [<ffffffff810b4220>] ? kthread_freezable_should_stop+0x80/0x80 [ 53.888386] [<ffffffff8168623c>] ret_from_fork+0x7c/0xb0 [ 53.888392] [<ffffffff810b4220>] ? kthread_freezable_should_stop+0x80/0x80 [ 53.888397] ---[ end trace 918a23c9bada3aed ]--- [ 53.888402] ------------[ cut here ]------------ [ 53.888407] WARNING: at /home/konrad/linux/lib/klist.c:189 klist_release+0x112/0x120() [ 53.888412] Modules linked in: dm_multipath dm_mod xen_evtchn iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi scsi_mod libcrc32c crc32c radeon fbcon tileblit font bitblit softcursor ttm drm_kms_helper crc32c_intel xen_blkfront xen_netfront xen_fbfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_kbdfront xenfs xen_privcmd [last unloaded: e1000e] [ 53.888478] CPU: 1 PID: 26 Comm: xenwatch Tainted: G W 3.10.0-rc4upstream-00172-g909fe9e-dirty #2 [ 53.888484] ffffffff819a3648 ffff88011e3c1b18 ffffffff8167a27d ffff88011e3c1b58 [ 53.888495] ffffffff8108d1eb 0000000000000010 ffff880109533aa8 ffff880109533a90 [ 53.888506] ffffffff81421460 0000000000000000 dead000000100100 ffff88011e3c1b68 [ 53.888517] Call Trace: [ 53.888523] [<ffffffff8167a27d>] dump_stack+0x19/0x1b [ 53.888529] [<ffffffff8108d1eb>] warn_slowpath_common+0x6b/0xa0 [ 53.888536] [<ffffffff81421460>] ? class_for_each_device+0xa0/0xa0 [ 53.888543] [<ffffffff8108d235>] warn_slowpath_null+0x15/0x20 [ 53.888549] [<ffffffff81663c82>] klist_release+0x112/0x120 [ 53.888556] [<ffffffff81421460>] ? class_for_each_device+0xa0/0xa0 [ 53.888563] [<ffffffff81663cb8>] klist_dec_and_del+0x28/0x30 [ 53.888601] [<ffffffff81663eb5>] klist_next+0x45/0x140 [ 53.888608] [<ffffffff8131c410>] ? pci_match_next_bus+0x10/0x10 [ 53.888615] [<ffffffff81421108>] class_dev_iter_next+0x18/0x50 [ 53.888621] [<ffffffff81421358>] class_find_device+0x48/0xb0 [ 53.888628] [<ffffffff8131c8aa>] pci_get_next_root_bus+0x4a/0x80 [ 53.888634] [<ffffffff8132f6a5>] pcifront_free_roots+0x25/0x60 [ 53.888640] [<ffffffff8132f6f1>] free_pdev+0x11/0x80 [ 53.888646] [<ffffffff8132f77a>] pcifront_xenbus_remove+0x1a/0x20 [ 53.888653] [<ffffffff813abae8>] xenbus_dev_remove+0x38/0x70 [ 53.888660] [<ffffffff8141ffc1>] __device_release_driver+0x61/0xd0 [ 53.888667] [<ffffffff81420148>] device_release_driver+0x28/0x40 [ 53.888673] [<ffffffff8141f296>] bus_remove_device+0x106/0x140 [ 53.888680] [<ffffffff8141d120>] device_del+0x110/0x1c0 [ 53.888688] [<ffffffff8141d1e1>] device_unregister+0x11/0x20 [ 53.888694] [<ffffffff813ab946>] xenbus_dev_changed+0x96/0x1d0 [ 53.888701] [<ffffffff81048bd6>] ? xen_spin_lock+0xa6/0x110 [ 53.888708] [<ffffffff813ad2f6>] frontend_changed+0x16/0x20 [ 53.888714] [<ffffffff813a9c5b>] xenwatch_thread+0xcb/0x190 [ 53.888721] [<ffffffff810b49d0>] ? wake_up_bit+0x40/0x40 [ 53.888727] [<ffffffff813a9b90>] ? xs_watch+0x60/0x60 [ 53.888733] [<ffffffff810b42e6>] kthread+0xc6/0xd0 [ 53.888739] [<ffffffff8103a149>] ? xen_end_context_switch+0x19/0x20 [ 53.888746] [<ffffffff810b4220>] ? kthread_freezable_should_stop+0x80/0x80 [ 53.888755] [<ffffffff8168623c>] ret_from_fork+0x7c/0xb0 [ 53.888761] [<ffffffff810b4220>] ? kthread_freezable_should_stop+0x80/0x80 [ 53.888766] ---[ end trace 918a23c9bada3aee ]--- [ 53.888776] general protection fault: 0000 [#1] SMP [ 53.888783] Modules linked in: dm_multipath dm_mod xen_evtchn iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi scsi_mod libcrc32c crc32c radeon fbcon tileblit font bitblit softcursor ttm drm_kms_helper crc32c_intel xen_blkfront xen_netfront xen_fbfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_kbdfront xenfs xen_privcmd [last unloaded: e1000e] [ 53.888847] CPU: 1 PID: 26 Comm: xenwatch Tainted: G W 3.10.0-rc4upstream-00172-g909fe9e-dirty #2 [ 53.888853] task: ffff88011e2eb800 ti: ffff88011e3c0000 task.ti: ffff88011e3c0000 [ 53.888859] RIP: e030:[<ffffffff81663baa>] [<ffffffff81663baa>] klist_release+0x3a/0x120 [ 53.888867] RSP: e02b:ffff88011e3c1b78 EFLAGS: 00010292 [ 53.888872] RAX: dead000000200200 RBX: ffff880109533aa8 RCX: 0000006c3739ee67 [ 53.888877] RDX: dead000000100100 RSI: dead000000200200 RDI: dead000000100100 [ 53.888882] RBP: ffff88011e3c1b98 R08: 00000000a589f9bc R09: 0720072007200720 [ 53.888887] R10: 0720072007200720 R11: 0720072007200720 R12: ffff880109533a90 [ 53.888892] R13: ffffffff81421460 R14: 0000000000000000 R15: dead000000100100 [ 53.888900] FS: 00007fe6ef1d97a0(0000) GS:ffff88011f900000(0000) knlGS:0000000000000000 [ 53.888907] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.888912] CR2: 00007f1c4090ddd0 CR3: 000000010f0cd000 CR4: 0000000000042660 [ 53.888917] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.888923] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 53.888928] Stack: [ 53.888932] ffff880109533a90 ffff88011e3c1c18 ffff880109533a90 ffffffff81421460 [ 53.888943] ffff88011e3c1ba8 ffffffff81663cb8 ffff88011e3c1be8 ffffffff81663eb5 [ 53.888954] 0000000000000000 ffff88011e3c1c18 0000000000000000 ffffffff8131c410 [ 53.888965] Call Trace: [ 53.888971] [<ffffffff81421460>] ? class_for_each_device+0xa0/0xa0 [ 53.888978] [<ffffffff81663cb8>] klist_dec_and_del+0x28/0x30 [ 53.888985] [<ffffffff81663eb5>] klist_next+0x45/0x140 [ 53.888992] [<ffffffff8131c410>] ? pci_match_next_bus+0x10/0x10 [ 53.888999] [<ffffffff81421108>] class_dev_iter_next+0x18/0x50 [ 53.889006] [<ffffffff81421358>] class_find_device+0x48/0xb0 [ 53.889012] [<ffffffff8131c8aa>] pci_get_next_root_bus+0x4a/0x80 [ 53.889020] [<ffffffff8132f6a5>] pcifront_free_roots+0x25/0x60 [ 53.889026] [<ffffffff8132f6f1>] free_pdev+0x11/0x80 [ 53.889032] [<ffffffff8132f77a>] pcifront_xenbus_remove+0x1a/0x20 [ 53.889039] [<ffffffff813abae8>] xenbus_dev_remove+0x38/0x70 [ 53.889046] [<ffffffff8141ffc1>] __device_release_driver+0x61/0xd0 [ 53.889054] [<ffffffff81420148>] device_release_driver+0x28/0x40 [ 53.889062] [<ffffffff8141f296>] bus_remove_device+0x106/0x140 [ 53.889064] [<ffffffff8141d120>] device_del+0x110/0x1c0 [ 53.889064] [<ffffffff8141d1e1>] device_unregister+0x11/0x20 [ 53.889064] [<ffffffff813ab946>] xenbus_dev_changed+0x96/0x1d0 [ 53.889064] [<ffffffff81048bd6>] ? xen_spin_lock+0xa6/0x110 [ 53.889064] [<ffffffff813ad2f6>] frontend_changed+0x16/0x20 [ 53.889064] [<ffffffff813a9c5b>] xenwatch_thread+0xcb/0x190 [ 53.889064] [<ffffffff810b49d0>] ? wake_up_bit+0x40/0x40 [ 53.889064] [<ffffffff813a9b90>] ? xs_watch+0x60/0x60 [ 53.889064] [<ffffffff810b42e6>] kthread+0xc6/0xd0 [ 53.889064] [<ffffffff8103a149>] ? xen_end_context_switch+0x19/0x20 [ 53.889064] [<ffffffff810b4220>] ? kthread_freezable_should_stop+0x80/0x80 [ 53.889064] [<ffffffff8168623c>] ret_from_fork+0x7c/0xb0 [ 53.889064] [<ffffffff810b4220>] ? kthread_freezable_should_stop+0x80/0x80 [ 53.889064] Code: fb 48 83 ec 08 f6 47 e8 01 0f 84 e3 00 00 00 48 8b 43 f8 48 8b 53 f0 48 bf 00 01 10 00 00 00 ad de 48 be 00 02 20 00 00 00 ad de <48> 89 42 08 48 89 10 48 89 7b f0 48 89 73 f8 48 c7 c7 54 44 d7 [ 53.889064] RIP [<ffffffff81663baa>] klist_release+0x3a/0x120 [ 53.889064] RSP <ffff88011e3c1b78> [ 53.889285] ---[ end trace 918a23c9bada3aef ]--- [ 53.889290] BUG: sleeping function called from invalid context at /home/konrad/linux/kernel/rwsem.c:20 [ 53.889296] in_atomic(): 1, irqs_disabled(): 0, pid: 26, name: xenwatch [ 53.889302] CPU: 1 PID: 26 Comm: xenwatch Tainted: G D W 3.10.0-rc4upstream-00172-g909fe9e-dirty #2 [ 53.889307] 000000000000000b ffff88011e3c1928 ffffffff8167a27d ffff88011e3c1938 [ 53.889319] ffffffff810bf5a8 ffff88011e3c1958 ffffffff8167b56f 0720072007200720 [ 53.889331] ffff88011e2eb800 ffff88011e3c1998 ffffffff810a279a 0000000000000000 [ 53.889342] Call Trace: [ 53.889347] [<ffffffff8167a27d>] dump_stack+0x19/0x1b [ 53.889354] [<ffffffff810bf5a8>] __might_sleep+0xd8/0x100 [ 53.889360] [<ffffffff8167b56f>] down_read+0x1f/0x40 [ 53.889368] [<ffffffff810a279a>] exit_signals+0x2a/0x170 [ 53.889374] [<ffffffff81091ddf>] do_exit+0xaf/0xbe0 [ 53.889380] [<ffffffff8167a12e>] ? printk+0x48/0x4a [ 53.889387] [<ffffffff810423f2>] ? check_events+0x12/0x20 [ 53.889394] [<ffffffff8167f220>] oops_end+0xb0/0xf0 [ 53.889401] [<ffffffff8104da06>] die+0x56/0x90 [ 53.889407] [<ffffffff8167effc>] do_general_protection+0xdc/0x160 [ 53.889414] [<ffffffff81421460>] ? class_for_each_device+0xa0/0xa0 [ 53.889420] [<ffffffff8167e668>] general_protection+0x28/0x30 [ 53.889427] [<ffffffff81421460>] ? class_for_each_device+0xa0/0xa0 [ 53.889434] [<ffffffff81663baa>] ? klist_release+0x3a/0x120 [ 53.889441] [<ffffffff81663c82>] ? klist_release+0x112/0x120 [ 53.889447] [<ffffffff81421460>] ? class_for_each_device+0xa0/0xa0 [ 53.889454] [<ffffffff81663cb8>] klist_dec_and_del+0x28/0x30 [ 53.889461] [<ffffffff81663eb5>] klist_next+0x45/0x140 [ 53.889467] [<ffffffff8131c410>] ? pci_match_next_bus+0x10/0x10 [ 53.889473] [<ffffffff81421108>] class_dev_iter_next+0x18/0x50 [ 53.889480] [<ffffffff81421358>] class_find_device+0x48/0xb0 [ 53.889486] [<ffffffff8131c8aa>] pci_get_next_root_bus+0x4a/0x80 [ 53.889493] [<ffffffff8132f6a5>] pcifront_free_roots+0x25/0x60 [ 54.002497] [<ffffffff8132f6f1>] free_pdev+0x11/0x80 [ 54.002505] [<ffffffff8132f77a>] pcifront_xenbus_remove+0x1a/0x20 [ 54.002516] [<ffffffff813abae8>] xenbus_dev_remove+0x38/0x70 [ 54.002524] [<ffffffff8141ffc1>] __device_release_driver+0x61/0xd0 [ 54.002530] [<ffffffff81420148>] device_release_driver+0x28/0x40 [ 54.002537] [<ffffffff8141f296>] bus_remove_device+0x106/0x140 [ 54.002544] [<ffffffff8141d120>] device_del+0x110/0x1c0 [ 54.002551] [<ffffffff8141d1e1>] device_unregister+0x11/0x20 [ 54.002558] [<ffffffff813ab946>] xenbus_dev_changed+0x96/0x1d0 [ 54.002567] [<ffffffff81048bd6>] ? xen_spin_lock+0xa6/0x110 [ 54.002574] [<ffffffff813ad2f6>] frontend_changed+0x16/0x20 [ 54.002581] [<ffffffff813a9c5b>] xenwatch_thread+0xcb/0x190 [ 54.002588] [<ffffffff810b49d0>] ? wake_up_bit+0x40/0x40 [ 54.002595] [<ffffffff813a9b90>] ? xs_watch+0x60/0x60 [ 54.002601] [<ffffffff810b42e6>] kthread+0xc6/0xd0 [ 54.002607] [<ffffffff8103a149>] ? xen_end_context_switch+0x19/0x20 [ 54.002615] [<ffffffff810b4220>] ? kthread_freezable_should_stop+0x80/0x80 [ 54.002624] [<ffffffff8168623c>] ret_from_fork+0x7c/0xb0 [ 54.002630] [<ffffffff810b4220>] ? kthread_freezable_should_stop+0x80/0x80 [ 54.002637] note: xenwatch[26] exited with preempt_count 1 # # ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH v2, part3 07/11] PCI, xen-pcifront: use new PCI interfaces to simplify implementation 2013-06-07 15:38 ` Konrad Rzeszutek Wilk @ 2013-06-07 16:50 ` Jiang Liu 2013-06-07 17:07 ` Konrad Rzeszutek Wilk 0 siblings, 1 reply; 12+ messages in thread From: Jiang Liu @ 2013-06-07 16:50 UTC (permalink / raw) To: Konrad Rzeszutek Wilk Cc: Bjorn Helgaas, Yinghai Lu, Jiang Liu, Rafael J . Wysocki, Greg Kroah-Hartman, Gu Zheng, Toshi Kani, Myron Stowe, Yijing Wang, linux-pci, linux-kernel, Jeremy Fitzhardinge, xen-devel, virtualization On 06/07/2013 11:38 PM, Konrad Rzeszutek Wilk wrote: > On Fri, Jun 07, 2013 at 10:50:24AM -0400, Konrad Rzeszutek Wilk wrote: >> On Thu, May 16, 2013 at 11:50:55PM +0800, Jiang Liu wrote: >>> Use new PCI interfaces to simplify xen-pcifront implementation: >>> 1) Use pci_create_root_bus() instead of pci_scan_bus_parented() >>> because pci_scan_bus_parented() is marked as __deprecated.This >>> also gets rid of a duplicated call of pci_bus_start_devices(). >>> 2) Use pci_stop_root_bus() and pci_remove_root_bus() instead of >>> open-coded private implementation. >>> 3) Use pci_set_host_bridge_release() to release data structures >>> associated with PCI root buses. >>> 4) Use pci_bus_get()/pci_bus_put() to manage PCI root bus reference >>> count. >>> >>> This is also a preparation for coming PCI bus lock enhancement. > > With this patch from : > > Merge branch 'pci_lock_v3' of https://github.com/jiangliu/linux into testing > > > it blows up when detaching the device. Hi Konrad, Thanks for testing! According to the log messages, this issue should be related to pci bus reference counter management. Seems we have done an extra(unbalanced) release of pci bus device. Will investigate it tomorrow! Regards! Gerry > > Parsing config from /vm-pv-discard.cfg > Daemon running with PID 4062 > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Initializing cgroup subsys cpuacct > [ 0.000000] Linux version 3.10.0-rc4upstream-00172-g909fe9e-dirty (konrad@phenom.dumpdata.com) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #2 SMP Fri Jun 7 10:55:54 EDT 2013 > [ 0.000000] Command line: console=hvc0 debug > [ 0.000000] ACPI in unprivileged domain disabled > [ 0.000000] Freeing 20000-40000 pfn range: 131072 pages freed > [ 0.000000] 1-1 mapping on 20000->100000 > [ 0.000000] Released 131072 pages of unused memory > [ 0.000000] Set 917504 page(s) to 1-1 mapping > [ 0.000000] Populating 100000-120000 pfn range: 131072 pages added > [ 0.000000] e820: BIOS-provided physical RAM map: > [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable > [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved > [ 0.000000] Xen: [mem 0x0000000000100000-0x000000001fffffff] usable > [ 0.000000] Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved > [ 0.000000] Xen: [mem 0x0000000020200000-0x000000003fffffff] unusable > [ 0.000000] Xen: [mem 0x0000000040000000-0x00000000401fffff] reserved > [ 0.000000] Xen: [mem 0x0000000040200000-0x00000000c6cd3fff] unusable > [ 0.000000] Xen: [mem 0x00000000c6cd4000-0x00000000c6d1cfff] ACPI NVS > [ 0.000000] Xen: [mem 0x00000000c6d1d000-0x00000000c6d27fff] ACPI data > [ 0.000000] Xen: [mem 0x00000000c6d28000-0x00000000c6d28fff] ACPI NVS > [ 0.000000] Xen: [mem 0x00000000c6d29000-0x00000000c6d49fff] reserved > [ 0.000000] Xen: [mem 0x00000000c6d4a000-0x00000000c6d4bfff] unusable > [ 0.000000] Xen: [mem 0x00000000c6d4c000-0x00000000c6d6cfff] ACPI NVS > [ 0.000000] Xen: [mem 0x00000000c6d6d000-0x00000000c6d8ffff] reserved > [ 0.000000] Xen: [mem 0x00000000c6d90000-0x00000000c6d9cfff] ACPI NVS > [ 0.000000] Xen: [mem 0x00000000c6d9d000-0x00000000c6d9ffff] reserved > [ 0.000000] Xen: [mem 0x00000000c6da0000-0x00000000c6db0fff] ACPI NVS > [ 0.000000] Xen: [mem 0x00000000c6db1000-0x00000000c6ddcfff] reserved > [ 0.000000] Xen: [mem 0x00000000c6ddd000-0x00000000c6e1ffff] ACPI NVS > [ 0.000000] Xen: [mem 0x00000000c6e20000-0x00000000c6ffffff] unusable > [ 0.000000] Xen: [mem 0x00000000c7800000-0x00000000cf9fffff] reserved > [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved > [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved > [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved > [ 0.000000] Xen: [mem 0x0000000100000000-0x000000011fffffff] usable > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] DMI not present or invalid. > [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved > [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable > [ 0.000000] No AGP bridge found > [ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000 > [ 0.000000] e820: last_pfn = 0x20000 max_arch_pfn = 0x400000000 > [ 0.000000] Scanning 1 areas for low memory corruption > [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 24576 > [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] > [ 0.000000] [mem 0x00000000-0x000fffff] page 4k > [ 0.000000] init_memory_mapping: [mem 0x11fe00000-0x11fffffff] > [ 0.000000] [mem 0x11fe00000-0x11fffffff] page 4k > [ 0.000000] BRK [0x01d8a000, 0x01d8afff] PGTABLE > [ 0.000000] BRK [0x01d8b000, 0x01d8bfff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fdfffff] > [ 0.000000] [mem 0x11c000000-0x11fdfffff] page 4k > [ 0.000000] BRK [0x01d8c000, 0x01d8cfff] PGTABLE > [ 0.000000] BRK [0x01d8d000, 0x01d8dfff] PGTABLE > [ 0.000000] BRK [0x01d8e000, 0x01d8efff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] > [ 0.000000] [mem 0x100000000-0x11bffffff] page 4k > [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] > [ 0.000000] [mem 0x00100000-0x1fffffff] page 4k > [ 0.000000] RAMDISK: [mem 0x02197000-0x13f67fff] > [ 0.000000] NUMA turned off > [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff] > [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff] > [ 0.000000] NODE_DATA [mem 0x11fea2000-0x11fea5fff] > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x00001000-0x00ffffff] > [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] > [ 0.000000] Normal [mem 0x100000000-0x11fffffff] > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x00001000-0x0009ffff] > [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] > [ 0.000000] node 0: [mem 0x100000000-0x11fffffff] > [ 0.000000] On node 0 totalpages: 262047 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 21 pages reserved > [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 1736 pages used for memmap > [ 0.000000] DMA32 zone: 126976 pages, LIFO batch:31 > [ 0.000000] Normal zone: 1792 pages used for memmap > [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 > [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs > [ 0.000000] No local APIC present > [ 0.000000] APIC: disable apic facility > [ 0.000000] APIC: switched to apic NOOP > [ 0.000000] nr_irqs_gsi: 16 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 > [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 > [ 0.000000] PM: Registered nosave memory: 0000000020200000 - 0000000040000000 > [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 > [ 0.000000] PM: Registered nosave memory: 0000000040200000 - 00000000c6cd4000 > [ 0.000000] PM: Registered nosave memory: 00000000c6cd4000 - 00000000c6d1d000 > [ 0.000000] PM: Registered nosave memory: 00000000c6d1d000 - 00000000c6d28000 > [ 0.000000] PM: Registered nosave memory: 00000000c6d28000 - 00000000c6d29000 > [ 0.000000] PM: Registered nosave memory: 00000000c6d29000 - 00000000c6d4a000 > [ 0.000000] PM: Registered nosave memory: 00000000c6d4a000 - 00000000c6d4c000 > [ 0.000000] PM: Registered nosave memory: 00000000c6d4c000 - 00000000c6d6d000 > [ 0.000000] PM: Registered nosave memory: 00000000c6d6d000 - 00000000c6d90000 > [ 0.000000] PM: Registered nosave memory: 00000000c6d90000 - 00000000c6d9d000 > [ 0.000000] PM: Registered nosave memory: 00000000c6d9d000 - 00000000c6da0000 > [ 0.000000] PM: Registered nosave memory: 00000000c6da0000 - 00000000c6db1000 > [ 0.000000] PM: Registered nosave memory: 00000000c6db1000 - 00000000c6ddd000 > [ 0.000000] PM: Registered nosave memory: 00000000c6ddd000 - 00000000c6e20000 > [ 0.000000] PM: Registered nosave memory: 00000000c6e20000 - 00000000c7000000 > [ 0.000000] PM: Registered nosave memory: 00000000c7000000 - 00000000c7800000 > [ 0.000000] PM: Registered nosave memory: 00000000c7800000 - 00000000cfa00000 > [ 0.000000] PM: Registered nosave memory: 00000000cfa00000 - 00000000fed1c000 > [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000 > [ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fee00000 > [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 > [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 > [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 > [ 0.000000] e820: [mem 0xcfa00000-0xfed1bfff] available for PCI devices > [ 0.000000] Booting paravirtualized kernel on Xen > [ 0.000000] Xen version: 4.3-unstable (preserve-AD) > [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011f800000 s85632 r8192 d20864 u1048576 > [ 0.000000] pcpu-alloc: s85632 r8192 d20864 u1048576 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 0 1 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258442 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: console=hvc0 debug > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 > [ 0.000000] Checking aperture... > [ 0.000000] No AGP bridge found > [ 0.000000] Memory: 722480k/4718592k available (6698k kernel code, 3670404k absent, 325708k reserved, 4234k data, 1724k init) > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. > [ 0.000000] NR_IRQS:33024 nr_irqs:288 16 > [ 0.000000] Console: colour dummy device 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] console [hvc0] enabled > [ 0.000000] Xen: using vcpuop timer interface > [ 0.000000] installing Xen timer for CPU 0 > [ 0.000000] tsc: Detected 3092.926 MHz processor > [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.85 BogoMIPS (lpj=3092926) > [ 0.001000] pid_max: default: 32768 minimum: 301 > [ 0.001000] Security Framework initialized > [ 0.001000] SELinux: Initializing. > [ 0.001000] SELinux: Starting in permissive mode > [ 0.001000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) > [ 0.001000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) > [ 0.001000] Mount-cache hash table entries: 256 > [ 0.001582] Initializing cgroup subsys freezer > [ 0.001698] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' > [ 0.001698] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) > [ 0.001708] CPU: Physical Processor ID: 0 > [ 0.001712] CPU: Processor Core ID: 0 > [ 0.001718] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 > [ 0.001718] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 > [ 0.001718] tlb_flushall_shift: 5 > [ 0.025468] cpu 0 spinlock event irq 17 > [ 0.025566] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only. > [ 0.026081] NMI watchdog: disabled (cpu0): hardware events not enabled > [ 0.026680] installing Xen timer for CPU 1 > [ 0.026723] cpu 1 spinlock event irq 24 > [ 0.026793] SMP alternatives: switching to SMP code > [ 0.048014] Brought up 2 CPUs > [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6cd4000-0xc6d1cfff] (299008 bytes) > [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6d28000-0xc6d28fff] (4096 bytes) > [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6d4c000-0xc6d6cfff] (135168 bytes) > [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6d90000-0xc6d9cfff] (53248 bytes) > [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6da0000-0xc6db0fff] (69632 bytes) > [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6ddd000-0xc6e1ffff] (274432 bytes) > [ 0.051399] kworker/u4:0 (19) used greatest stack depth: 6016 bytes left > [ 0.052492] Grant tables using version 2 layout. > [ 0.052492] Grant table initialized > [ 0.071696] RTC time: 165:165:165, date: 165/165/65 > [ 0.071985] NET: Registered protocol family 16 > [ 0.072173] kworker/u4:0 (22) used greatest stack depth: 5928 bytes left > [ 0.073110] kworker/u4:0 (30) used greatest stack depth: 5464 bytes left > [ 0.074030] dca service started, version 1.12.1 > [ 0.074563] PCI: setting up Xen PCI frontend stub > [ 0.074568] PCI: pci_cache_line_size set to 64 bytes > [ 0.101148] bio: create slab <bio-0> at 0 > [ 0.101220] ACPI: Interpreter disabled. > [ 0.102003] xen/balloon: Initialising balloon driver. > [ 0.103081] xen-balloon: Initialising balloon driver. > [ 0.104136] vgaarb: loaded > [ 0.105135] usbcore: registered new interface driver usbfs > [ 0.105135] usbcore: registered new interface driver hub > [ 0.105135] usbcore: registered new device driver usb > [ 0.106089] pps_core: LinuxPPS API ver. 1 registered > [ 0.106089] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> > [ 0.106089] PTP clock support registered > [ 0.106089] PCI: System does not support PCI > [ 0.106089] PCI: System does not support PCI > [ 0.107154] NetLabel: Initializing > [ 0.107154] NetLabel: domain hash size = 128 > [ 0.107154] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.107175] NetLabel: unlabeled traffic allowed by default > [ 0.108087] Switching to clocksource xen > [ 0.125349] pnp: PnP ACPI: disabled > [ 0.138965] NET: Registered protocol family 2 > [ 0.139578] TCP established hash table entries: 8192 (order: 5, 131072 bytes) > [ 0.139647] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) > [ 0.139668] TCP: Hash tables configured (established 8192 bind 8192) > [ 0.193672] TCP: reno registered > [ 0.193693] UDP hash table entries: 512 (order: 2, 16384 bytes) > [ 0.193712] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) > [ 0.194030] NET: Registered protocol family 1 > [ 0.194380] RPC: Registered named UNIX socket transport module. > [ 0.194389] RPC: Registered udp transport module. > [ 0.194394] RPC: Registered tcp transport module. > [ 0.194398] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 0.194404] PCI: CLS 0 bytes, default 64 > [ 0.194570] Unpacking initramfs... > [ 0.778545] Freeing initrd memory: 292676k freed > [ 0.823501] platform rtc_cmos: registered platform RTC device (no PNP device found) > [ 0.823855] Machine check injector initialized > [ 0.825040] Scanning for low memory corruption every 60 seconds > [ 0.826072] audit: initializing netlink socket (disabled) > [ 0.826114] type=2000 audit(1370618465.698:1): initialized > [ 0.839204] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 0.839673] VFS: Disk quotas dquot_6.5.2 > [ 0.839760] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 0.840528] NFS: Registering the id_resolver key type > [ 0.840553] Key type id_resolver registered > [ 0.840558] Key type id_legacy registered > [ 0.840587] NTFS driver 2.1.30 [Flags: R/W]. > [ 0.840919] msgmni has been set to 1982 > [ 0.841082] SELinux: Registering netfilter hooks > [ 0.842697] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) > [ 0.842706] io scheduler noop registered > [ 0.842710] io scheduler deadline registered > [ 0.842772] io scheduler cfq registered (default) > [ 0.843309] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 0.846284] intel_idle: does not run on family 6 model 42 > [ 0.846299] ioatdma: Intel(R) QuickData Technology Driver 4.00 > [ 0.847400] pcifront pci-0: Installing PCI frontend > [ 0.847417] Warning: only able to allocate 4 MB for software IO TLB > [ 0.850807] software IO TLB [mem 0x109000000-0x109400000] (4MB) mapped at [ffff880109000000-ffff8801093fffff] > [ 0.851175] pcifront pci-0: Creating PCI Frontend Bus 0000:00 > [ 0.851458] pcifront pci-0: PCI host bridge to bus 0000:00 > [ 0.851469] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] > [ 0.851478] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] > [ 0.851487] pci_bus 0000:00: root bus resource [bus 00] > [ 0.852031] pci 0000:00:00.0: [8086:105e] type 00 class 0x020000 > [ 0.852419] pci 0000:00:00.0: reg 0x10: [mem 0xfe4a0000-0xfe4bffff] > [ 0.852631] pci 0000:00:00.0: reg 0x14: [mem 0xfe480000-0xfe49ffff] > [ 0.852743] pci 0000:00:00.0: reg 0x18: [io 0xe020-0xe03f] > [ 0.853905] pcifront pci-0: New device on 0000:00:00.0 found. > [ 0.857483] pcifront pci-0: claiming resource 0000:00:00.0/0 > [ 0.857490] pcifront pci-0: claiming resource 0000:00:00.0/1 > [ 0.857495] pcifront pci-0: claiming resource 0000:00:00.0/2 > [ 0.939621] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.942227] Non-volatile memory driver v1.3 > [ 0.942414] Linux agpgart interface v0.103 > [ 0.943295] [drm] Initialized drm 1.1.0 20060810 > [ 0.947952] loop: module loaded > [ 0.948577] libphy: Fixed MDIO Bus: probed > [ 0.948583] tun: Universal TUN/TAP device driver, 1.6 > [ 0.948588] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> > [ 0.948913] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.7.12-k > [ 0.948921] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation. > [ 0.950031] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 0.950039] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 > [ 0.950061] ehci-pci: EHCI PCI platform driver > [ 0.950201] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 0.950207] ohci_hcd: block sizes: ed 80 td 96 > [ 0.950357] uhci_hcd: USB Universal Host Controller Interface driver > [ 0.950736] usbcore: registered new interface driver usblp > [ 0.951285] i8042: PNP: No PS/2 controller found. Probing ports directly. > [ 1.960646] i8042: No controller found > [ 1.960872] mousedev: PS/2 mouse device common for all mice > [ 2.021775] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 > [ 2.021941] rtc_cmos: probe of rtc_cmos failed with error -38 > [ 2.023233] zram: Created 1 device(s) ... > [ 2.023567] Netfilter messages via NETLINK v0.30. > [ 2.023612] nf_conntrack version 0.5.0 (7930 buckets, 31720 max) > [ 2.023775] ctnetlink v0.93: registering with nfnetlink. > [ 2.024045] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 2.024170] TCP: cubic registered > [ 2.024177] Initializing XFRM netlink socket > [ 2.024379] NET: Registered protocol family 10 > [ 2.024936] ip6_tables: (C) 2000-2006 Netfilter Core Team > [ 2.025259] sit: IPv6 over IPv4 tunneling driver > [ 2.026039] NET: Registered protocol family 17 > [ 2.026320] Key type dns_resolver registered > [ 2.026874] PM: Hibernation image not present or could not be loaded. > [ 2.026922] registered taskstats version 1 > [ 2.027005] kmemleak: Kernel memory leak detector initialized > [ 2.027009] kmemleak: Automatic memory scanning thread started > [ 2.027437] XENBUS: Device with no driver: device/vbd/51712 > [ 2.027537] Magic number: 1:252:3141 > [ 2.029169] Freeing unused kernel memory: 1724k freed > [ 2.029408] Write protecting the kernel read-only data: 10240k > [ 2.033649] Freeing unused kernel memory: 1480k freed > [ 2.033908] Freeing unused kernel memory: 72k freed > > init started: BusyBox v1.14.3 (2013-06-07 10:58:39 EDT) > [ 2.040621] consoletype (1038) used greatest stack depth: 5304 bytes left > Mounting directories [ OK ] > [ 2.059689] chmod (1044) used greatest stack depth: 4856 bytes left > mount: mount point /proc/bus/usb does not exist > mount: mount point /sys/kernel/config does not exist > [ 2.266374] Initialising Xen virtual ethernet driver. > [ 2.273190] vbd vbd-51712: blkfront:blkback_changed to state 2. > [ 2.283349] vbd vbd-51712: blkfront:blkback_changed to state 4. > [ 2.283356] vbd vbd-51712: blkfront_connect:/local/domain/0/backend/vbd/2/51712. > [ 2.287707] blkfront: xvda: flush diskcache: enabled; persistent grants: enabled; indirect descriptors: enabled; > [ 2.288337] Entered do_blkif_request > [ 2.288344] Entered do_blkif_request > [ 2.288821] Entered do_blkif_request > [ 2.288829] do_blk_req ffff880108ec9e10: cmd ffff880108ec9f00, sec 0, (4/4) buffer:ffff880108ee6000 [read] > [ 2.288839] Entered do_blkif_request > [ 2.288859] Entered do_blkif_request > [ 2.288864] do_blk_req ffff880108ec9cb8: cmd ffff880108ec9da8, sec 4, (4/4) buffer:ffff880108ee6800 [read] > [ 2.288871] Entered do_blkif_request > [ 2.292721] Entered do_blkif_request > [ 2.292727] Entered do_blkif_request > [ 2.292737] Entered do_blkif_request > [ 2.292741] Entered do_blkif_request > [ 2.292780] Entered do_blkif_request > [ 2.292786] do_blk_req ffff880108ec9cb8: cmd ffff880108ec9da8, sec 8, (4/4) buffer:ffff88010f273000 [read] > [ 2.292794] Entered do_blkif_request > [ 2.292811] Entered do_blkif_request > [ 2.292816] do_blk_req ffff880108ec9e10: cmd ffff880108ec9f00, sec c, (4/4) buffer:ffff88010f273800 [read] > [ 2.292822] Entered do_blkif_request > [ 2.292940] Entered do_blkif_request > [ 2.292947] Entered do_blkif_request > [ 2.292957] Entered do_blkif_request > [ 2.292961] Entered do_blkif_request > [ 2.292974] xvda: unknown partition table > [ 2.385804] udevd (1099): /proc/1099/oom_adj is deprecated, please use /proc/1099/oom_score_adj instead. > [ 2.444038] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k > [ 2.444061] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. > [ 2.444110] e1000e 0000:00:00.0: Disabling ASPM L1 > [ 2.444232] e1000e 0000:00:00.0: enabling device (0000 -> 0002) > [ 2.447244] e1000e 0000:00:00.0: Xen PCI mapped GSI16 to IRQ34 > [ 2.447790] e1000e 0000:00:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode > udevd-work[1106]: error opening ATTR{/sys/devices/system/cpu/cpu0/online} for writing: No such file or directory > > [ 2.459644] vbd vbd-51712: command: 0x5331, argument: 0x0 > [ 2.560213] ip (1325) used greatest stack depth: 3760 bytes left > [ 2.624581] e1000e 0000:00:00.0 eth0: (PCI Express:2.5GT/s:Width x4) 00:15:17:8f:18:a2 > [ 2.624595] e1000e 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection > [ 2.624675] e1000e 0000:00:00.0 eth0: MAC: 0, PHY: 4, PBA No: D50868-003 > Waiting for devices [ OK ] > Waiting for fb [ OK ] > Starting..[/dev/fb0] > Could not open; err: 2 > FATAL: Module agpgart_intel not found. > [ 2.814571] [drm] radeon kernel modesetting enabled. > WARNING: Error inserting video (/lib/modules/3.10.0-rc4upstream-00172-g909fe9e-dirty/kernel/drivers/acpi/video.ko): No such device > WARNING: Error inserting mxm_wmi (/lib/modules/3.10.0-rc4upstream-00172-g909fe9e-dirty/kernel/drivers/platform/x86/mxm-wmi.ko): No such device > WARNING: Error inserting drm_kms_helper (/lib/modules/3.10.0-rc4upstream-00172-g909fe9e-dirty/kernel/drivers/gpu/drm/drm_kms_helper.ko): No such device > WARNING: Error inserting ttm (/lib/modules/3.10.0-rc4upstream-00172-g909fe9e-dirty/kernel/drivers/gpu/drm/ttm/ttm.ko): No such device > FATAL: Error inserting nouveau (/lib/modules/3.10.0-rc4upstream-00172-g909fe9e-dirty/kernel/drivers/gpu/drm/nouveau/nouveau.ko): No such device > WARNING: Error inserting drm_kms_helper (/lib/modules/3.10.0-rc4upstream-00172-g909fe9e-dirty/kernel/drivers/gpu/drm/drm_kms_helper.ko): No such device > FATAL: Error inserting i915 (/lib/modules/3.10.0-rc4upstream-00172-g909fe9e-dirty/kernel/drivers/gpu/drm/i915/i915.ko): No such device > Starting..[/dev/fb0] > Could not open; err: 2 > VGA: 0000: > Waiting for network [ OK ] > Bringing up loopback interface: [ OK ] > Bringing up interface eth0: [ 3.394987] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 3.397647] device eth0 entered promiscuous mode > [ OK ] > Bringing up interface switch: > Determining IP information for switch...[ 3.452997] IPv6: ADDRCONF(NETDEV_UP): switch: link is not ready > [ 5.533965] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx > [ 5.534117] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [ 5.534222] switch: port 1(eth0) entered forwarding state > [ 5.534239] switch: port 1(eth0) entered forwarding state > [ 5.534302] IPv6: ADDRCONF(NETDEV_CHANGE): switch: link becomes ready > done. > [ OK ] > Waiting for init.custom [ OK ] > > Starting SSHd ... > > SSH started [2202] > > > Waiting for SSHd [ OK ] > WARNING: ssh currently running [2202] ignoring start request > FATAL: Module dump_dma not found. > ERROR: Module dump_dma does not exist in /proc/modules > [ 9.129856] SCSI subsystem initialized > [ 9.131318] Loading iSCSI transport class v2.0-870. > [ 9.134894] iscsi: registered transport (tcp) > hostname: Name or service not known > iscsistart: transport class version 2.0-870. iscsid version 2.0-872 > Could not get list of targets from firmware. > Jun 7 15:21:14 (none) syslogd 1.5.0: restart. > Running in PV context on Xen v4.3. > FATAL: Module evtchn not found. > [ 9.176036] Event-channel device installed. > 00:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) > CPU0 CPU1 > 16: 2600 0 xen-percpu-virq timer0 > 17: 0 0 xen-percpu-ipi spinlock0 > 18: 3473 0 xen-percpu-ipi resched0 > 19: 0 0 xen-percpu-ipi callfunc0 > 20: 0 0 xen-percpu-virq debug0 > 21: 237 0 xen-percpu-ipi callfuncsingle0 > 22: 0 0 xen-percpu-ipi irqwork0 > 23: 0 2560 xen-percpu-virq timer1 > 24: 0 0 xen-percpu-ipi spinlock1 > 25: 0 3833 xen-percpu-ipi resched1 > 26: 0 0 xen-percpu-ipi callfunc1 > 27: 0 0 xen-percpu-virq debug1 > 28: 0 271 xen-percpu-ipi callfuncsingle1 > 29: 0 0 xen-percpu-ipi irqwork1 > 30: 235 0 xen-dyn-event xenbus > 31: 64 0 xen-dyn-event pcifront > 32: 89 0 xen-dyn-event hvc_console > 33: 4 0 xen-dyn-event blkif > 35: 27 0 xen-pirq-pcifront-msi eth0 > NMI: 0 0 Non-maskable interrupts > LOC: 0 0 Local timer interrupts > SPU: 0 0 Spurious interrupts > PMI: 0 0 Performance monitoring interrupts > IWI: 0 0 IRQ work interrupts > RTR: 0 0 APIC ICR read retries > RES: 3473 3833 Rescheduling interrupts > CAL: 237 271 Function call interrupts > TLB: 0 0 TLB shootdowns > TRM: 0 0 Thermal event interrupts > THR: 0 0 Threshold APIC interrupts > MCE: 0 0 Machine check exceptions > MCP: 0 0 Machine check polls > ERR: 0 > MIS: 0 > 00000000-00000fff : reserved > 00001000-0009ffff : System RAM > 000a0000-000fffff : reserved > 000f0000-000fffff : System ROM > 00100000-1fffffff : System RAM > 01000000-0168a927 : Kernel code > 0168a928-01aad2bf : Kernel data > 01c65000-01d74fff : Kernel bss > 20200000-3fffffff : Unusable memory > 40200000-c6cd3fff : Unusable memory > c6cd4000-c6d1cfff : ACPI Non-volatile Storage > c6d1d000-c6d27fff : ACPI Tables > c6d28000-c6d28fff : ACPI Non-volatile Storage > c6d4a000-c6d4bfff : Unusable memory > c6d4c000-c6d6cfff : ACPI Non-volatile Storage > c6d90000-c6d9cfff : ACPI Non-volatile Storage > c6da0000-c6db0fff : ACPI Non-volatile Storage > c6ddd000-c6e1ffff : ACPI Non-volatile Storage > c6e20000-c6ffffff : Unusable memory > fe480000-fe49ffff : 0000:00:00.0 > fe480000-fe49ffff : e1000e > fe4a0000-fe4bffff : 0000:00:00.0 > fe4a0000-fe4bffff : e1000e > 100000000-11fffffff : System RAM > MemTotal: 1018432 kB > MemFree: 641536 kB > Buffers: 0 kB > Cached: 310180 kB > SwapCached: 0 kB > Active: 19368 kB > Inactive: 290652 kB > Active(anon): 13120 kB > Inactive(anon): 84540 kB > Active(file): 6248 kB > Inactive(file): 206112 kB > Unevictable: 4940 kB > Mlocked: 4940 kB > SwapTotal: 0 kB > SwapFree: 0 kB > Dirty: 0 kB > Writeback: 0 kB > AnonPages: 4684 kB > Mapped: 5152 kB > Shmem: 94284 kB > Slab: 45924 kB > SReclaimable: 12804 kB > SUnreclaim: 33120 kB > KernelStack: 432 kB > PageTables: 692 kB > NFS_Unstable: 0 kB > Bounce: 0 kB > WritebackTmp: 0 kB > CommitLimit: 509216 kB > Committed_AS: 102792 kB > VmallocTotal: 34359738367 kB > VmallocUsed: 2332 kB > VmallocChunk: 34359735931 kB > AnonHugePages: 0 kB > HugePages_Total: 0 > HugePages_Free: 0 > HugePages_Rsvd: 0 > HugePages_Surp: 0 > Hugepagesize: 2048 kB > DirectMap4k: 1048576 kB > DirectMap2M: 0 kB > Waiting for init.late [ OK ] > PING build.dumpdata.com (192.168.102.1) 56(84) bytes of data. > > --- build.dumpdata.com ping statistics --- > 1 packets transmitted, 1 received, 0% packet loss, time 0ms > rtt min/avg/max/mdev = 0.208/0.208/0.208/0.000 ms > [ 9.336320] mount.nfs (2304) used greatest stack depth: 3320 bytes left > mount.nfs: access denied by server while mounting build:/srv/results > NFS done > /init.late: line 13: can't create /mnt/results/dmesg/(none)-3.10.0-rc4upstream-00172-g909fe9e-dirty.dmesg: nonexistent directory > [0x0->0x20000] pfn > [0x0->0x20000] level entry > [0x20000->0x100000] identity > [0x20000->0x100000] level middle > [0x100000->0x120000] pfn > [0x100000->0x120000] level entry > [0x120000->0x140000] level middle > [0x120000->0x7cfffff] missing > [0x140000->0x7cfffff] level top > /init.late: line 17: can't create /mnt/results/p2m/(none)-3.10.0-rc4upstream-00172-g909fe9e-dirty.p2m: nonexistent directory > libxl: error: libxl.c:87:libxl_ctx_alloc: Is xenstore daemon running? > failed to stat /var/run/xenstored.pid: No such file or directory > cannot init xl context > [ 9.669091] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com > [ 9.670252] device-mapper: multipath: version 1.5.1 loaded > PING 192.168.101.2 (192.168.101.2) 56(84) bytes of data. > kill -1 1 > > --- 192.168.101.2 ping statistics --- > 1 packets transmitted, 0 received, 100% packet loss, time 10000ms > > /init.late: line 34: boot_parameter: not found > [ 20.576092] switch: port 1(eth0) entered forwarding state > 7 Jun 15:21:27 ntpdate[2323]: adjust time server 17.171.4.15 offset -0.265117 sec > Cannot access the Hardware Clock via any known method. > Use the --debug option to see the details of our search for an access method. > Fri Jun 7 15:21:27 UTC 2013 > Jun 7 15:21:27 (none) init: starting pid 2333, tty '/dev/tty0': '/bin/sh' > Jun 7 15:21:27 (none) init: starting pid 2334, tty '/dev/tty1': '/bin/sh' > Jun 7 15:21:27 (none) init: starting pid 2335, tty '/dev/ttyS0': '/bin/sh' > Jun 7 15:21:27 (none) init: starting pid 2336, tty '/dev/hvc0': '/bin/sh' > > > BusyBox v1.14.3 (2013-06-07 10:58:39 EDT) built-in shell (ash) > Enter 'help' for a list of built-in commands. > > # kill -1 1 > # Jun 7 15:21:27 (none) init: reloading /etc/inittab > > # m\b \bdmesg > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Initializing cgroup subsys cpuacct > [ 0.000000] Linux version 3.10.0-rc4upstream-00172-g909fe9e-dirty (konrad@phenom.dumpdata.com) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #2 SMP Fri Jun 7 10:55:54 EDT 2013 > [ 0.000000] Command line: console=hvc0 debug > [ 0.000000] ACPI in unprivileged domain disabled > [ 0.000000] Freeing 20000-40000 pfn range: 131072 pages freed > [ 0.000000] 1-1 mapping on 20000->100000 > [ 0.000000] Released 131072 pages of unused memory > [ 0.000000] Set 917504 page(s) to 1-1 mapping > [ 0.000000] Populating 100000-120000 pfn range: 131072 pages added > [ 0.000000] e820: BIOS-provided physical RAM map: > [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable > [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved > [ 0.000000] Xen: [mem 0x0000000000100000-0x000000001fffffff] usable > [ 0.000000] Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved > [ 0.000000] Xen: [mem 0x0000000020200000-0x000000003fffffff] unusable > [ 0.000000] Xen: [mem 0x0000000040000000-0x00000000401fffff] reserved > [ 0.000000] Xen: [mem 0x0000000040200000-0x00000000c6cd3fff] unusable > [ 0.000000] Xen: [mem 0x00000000c6cd4000-0x00000000c6d1cfff] ACPI NVS > [ 0.000000] Xen: [mem 0x00000000c6d1d000-0x00000000c6d27fff] ACPI data > [ 0.000000] Xen: [mem 0x00000000c6d28000-0x00000000c6d28fff] ACPI NVS > [ 0.000000] Xen: [mem 0x00000000c6d29000-0x00000000c6d49fff] reserved > [ 0.000000] Xen: [mem 0x00000000c6d4a000-0x00000000c6d4bfff] unusable > [ 0.000000] Xen: [mem 0x00000000c6d4c000-0x00000000c6d6cfff] ACPI NVS > [ 0.000000] Xen: [mem 0x00000000c6d6d000-0x00000000c6d8ffff] reserved > [ 0.000000] Xen: [mem 0x00000000c6d90000-0x00000000c6d9cfff] ACPI NVS > [ 0.000000] Xen: [mem 0x00000000c6d9d000-0x00000000c6d9ffff] reserved > [ 0.000000] Xen: [mem 0x00000000c6da0000-0x00000000c6db0fff] ACPI NVS > [ 0.000000] Xen: [mem 0x00000000c6db1000-0x00000000c6ddcfff] reserved > [ 0.000000] Xen: [mem 0x00000000c6ddd000-0x00000000c6e1ffff] ACPI NVS > [ 0.000000] Xen: [mem 0x00000000c6e20000-0x00000000c6ffffff] unusable > [ 0.000000] Xen: [mem 0x00000000c7800000-0x00000000cf9fffff] reserved > [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved > [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved > [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved > [ 0.000000] Xen: [mem 0x0000000100000000-0x000000011fffffff] usable > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] DMI not present or invalid. > [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved > [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable > [ 0.000000] No AGP bridge found > [ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000 > [ 0.000000] e820: last_pfn = 0x20000 max_arch_pfn = 0x400000000 > [ 0.000000] Scanning 1 areas for low memory corruption > [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 24576 > [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] > [ 0.000000] [mem 0x00000000-0x000fffff] page 4k > [ 0.000000] init_memory_mapping: [mem 0x11fe00000-0x11fffffff] > [ 0.000000] [mem 0x11fe00000-0x11fffffff] page 4k > [ 0.000000] BRK [0x01d8a000, 0x01d8afff] PGTABLE > [ 0.000000] BRK [0x01d8b000, 0x01d8bfff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fdfffff] > [ 0.000000] [mem 0x11c000000-0x11fdfffff] page 4k > [ 0.000000] BRK [0x01d8c000, 0x01d8cfff] PGTABLE > [ 0.000000] BRK [0x01d8d000, 0x01d8dfff] PGTABLE > [ 0.000000] BRK [0x01d8e000, 0x01d8efff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] > [ 0.000000] [mem 0x100000000-0x11bffffff] page 4k > [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] > [ 0.000000] [mem 0x00100000-0x1fffffff] page 4k > [ 0.000000] RAMDISK: [mem 0x02197000-0x13f67fff] > [ 0.000000] NUMA turned off > [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff] > [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff] > [ 0.000000] NODE_DATA [mem 0x11fea2000-0x11fea5fff] > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x00001000-0x00ffffff] > [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] > [ 0.000000] Normal [mem 0x100000000-0x11fffffff] > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x00001000-0x0009ffff] > [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] > [ 0.000000] node 0: [mem 0x100000000-0x11fffffff] > [ 0.000000] On node 0 totalpages: 262047 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 21 pages reserved > [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 1736 pages used for memmap > [ 0.000000] DMA32 zone: 126976 pages, LIFO batch:31 > [ 0.000000] Normal zone: 1792 pages used for memmap > [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 > [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs > [ 0.000000] No local APIC present > [ 0.000000] APIC: disable apic facility > [ 0.000000] APIC: switched to apic NOOP > [ 0.000000] nr_irqs_gsi: 16 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 > [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 > [ 0.000000] PM: Registered nosave memory: 0000000020200000 - 0000000040000000 > [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 > [ 0.000000] PM: Registered nosave memory: 0000000040200000 - 00000000c6cd4000 > [ 0.000000] PM: Registered nosave memory: 00000000c6cd4000 - 00000000c6d1d000 > [ 0.000000] PM: Registered nosave memory: 00000000c6d1d000 - 00000000c6d28000 > [ 0.000000] PM: Registered nosave memory: 00000000c6d28000 - 00000000c6d29000 > [ 0.000000] PM: Registered nosave memory: 00000000c6d29000 - 00000000c6d4a000 > [ 0.000000] PM: Registered nosave memory: 00000000c6d4a000 - 00000000c6d4c000 > [ 0.000000] PM: Registered nosave memory: 00000000c6d4c000 - 00000000c6d6d000 > [ 0.000000] PM: Registered nosave memory: 00000000c6d6d000 - 00000000c6d90000 > [ 0.000000] PM: Registered nosave memory: 00000000c6d90000 - 00000000c6d9d000 > [ 0.000000] PM: Registered nosave memory: 00000000c6d9d000 - 00000000c6da0000 > [ 0.000000] PM: Registered nosave memory: 00000000c6da0000 - 00000000c6db1000 > [ 0.000000] PM: Registered nosave memory: 00000000c6db1000 - 00000000c6ddd000 > [ 0.000000] PM: Registered nosave memory: 00000000c6ddd000 - 00000000c6e20000 > [ 0.000000] PM: Registered nosave memory: 00000000c6e20000 - 00000000c7000000 > [ 0.000000] PM: Registered nosave memory: 00000000c7000000 - 00000000c7800000 > [ 0.000000] PM: Registered nosave memory: 00000000c7800000 - 00000000cfa00000 > [ 0.000000] PM: Registered nosave memory: 00000000cfa00000 - 00000000fed1c000 > [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000 > [ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fee00000 > [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 > [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 > [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 > [ 0.000000] e820: [mem 0xcfa00000-0xfed1bfff] available for PCI devices > [ 0.000000] Booting paravirtualized kernel on Xen > [ 0.000000] Xen version: 4.3-unstable (preserve-AD) > [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011f800000 s85632 r8192 d20864 u1048576 > [ 0.000000] pcpu-alloc: s85632 r8192 d20864 u1048576 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 0 1 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258442 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: console=hvc0 debug > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 > [ 0.000000] Checking aperture... > [ 0.000000] No AGP bridge found > [ 0.000000] Memory: 722480k/4718592k available (6698k kernel code, 3670404k absent, 325708k reserved, 4234k data, 1724k init) > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. > [ 0.000000] NR_IRQS:33024 nr_irqs:288 16 > [ 0.000000] Console: colour dummy device 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] console [hvc0] enabled > [ 0.000000] Xen: using vcpuop timer interface > [ 0.000000] installing Xen timer for CPU 0 > [ 0.000000] tsc: Detected 3092.926 MHz processor > [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.85 BogoMIPS (lpj=3092926) > [ 0.001000] pid_max: default: 32768 minimum: 301 > [ 0.001000] Security Framework initialized > [ 0.001000] SELinux: Initializing. > [ 0.001000] SELinux: Starting in permissive mode > [ 0.001000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) > [ 0.001000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) > [ 0.001000] Mount-cache hash table entries: 256 > [ 0.001582] Initializing cgroup subsys freezer > [ 0.001698] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' > [ 0.001698] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) > [ 0.001708] CPU: Physical Processor ID: 0 > [ 0.001712] CPU: Processor Core ID: 0 > [ 0.001718] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 > [ 0.001718] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 > [ 0.001718] tlb_flushall_shift: 5 > [ 0.025468] cpu 0 spinlock event irq 17 > [ 0.025566] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only. > [ 0.026081] NMI watchdog: disabled (cpu0): hardware events not enabled > [ 0.026680] installing Xen timer for CPU 1 > [ 0.026723] cpu 1 spinlock event irq 24 > [ 0.026793] SMP alternatives: switching to SMP code > [ 0.048014] Brought up 2 CPUs > [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6cd4000-0xc6d1cfff] (299008 bytes) > [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6d28000-0xc6d28fff] (4096 bytes) > [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6d4c000-0xc6d6cfff] (135168 bytes) > [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6d90000-0xc6d9cfff] (53248 bytes) > [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6da0000-0xc6db0fff] (69632 bytes) > [ 0.051334] PM: Registering ACPI NVS region [mem 0xc6ddd000-0xc6e1ffff] (274432 bytes) > [ 0.051399] kworker/u4:0 (19) used greatest stack depth: 6016 bytes left > [ 0.052492] Grant tables using version 2 layout. > [ 0.052492] Grant table initialized > [ 0.071696] RTC time: 165:165:165, date: 165/165/65 > [ 0.071985] NET: Registered protocol family 16 > [ 0.072173] kworker/u4:0 (22) used greatest stack depth: 5928 bytes left > [ 0.073110] kworker/u4:0 (30) used greatest stack depth: 5464 bytes left > [ 0.074030] dca service started, version 1.12.1 > [ 0.074563] PCI: setting up Xen PCI frontend stub > [ 0.074568] PCI: pci_cache_line_size set to 64 bytes > [ 0.101148] bio: create slab <bio-0> at 0 > [ 0.101220] ACPI: Interpreter disabled. > [ 0.102003] xen/balloon: Initialising balloon driver. > [ 0.103081] xen-balloon: Initialising balloon driver. > [ 0.104136] vgaarb: loaded > [ 0.105135] usbcore: registered new interface driver usbfs > [ 0.105135] usbcore: registered new interface driver hub > [ 0.105135] usbcore: registered new device driver usb > [ 0.106089] pps_core: LinuxPPS API ver. 1 registered > [ 0.106089] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> > [ 0.106089] PTP clock support registered > [ 0.106089] PCI: System does not support PCI > [ 0.106089] PCI: System does not support PCI > [ 0.107154] NetLabel: Initializing > [ 0.107154] NetLabel: domain hash size = 128 > [ 0.107154] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.107175] NetLabel: unlabeled traffic allowed by default > [ 0.108087] Switching to clocksource xen > [ 0.125349] pnp: PnP ACPI: disabled > [ 0.138965] NET: Registered protocol family 2 > [ 0.139578] TCP established hash table entries: 8192 (order: 5, 131072 bytes) > [ 0.139647] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) > [ 0.139668] TCP: Hash tables configured (established 8192 bind 8192) > [ 0.193672] TCP: reno registered > [ 0.193693] UDP hash table entries: 512 (order: 2, 16384 bytes) > [ 0.193712] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) > [ 0.194030] NET: Registered protocol family 1 > [ 0.194380] RPC: Registered named UNIX socket transport module. > [ 0.194389] RPC: Registered udp transport module. > [ 0.194394] RPC: Registered tcp transport module. > [ 0.194398] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 0.194404] PCI: CLS 0 bytes, default 64 > [ 0.194570] Unpacking initramfs... > [ 0.778545] Freeing initrd memory: 292676k freed > [ 0.823501] platform rtc_cmos: registered platform RTC device (no PNP device found) > [ 0.823855] Machine check injector initialized > [ 0.825040] Scanning for low memory corruption every 60 seconds > [ 0.826072] audit: initializing netlink socket (disabled) > [ 0.826114] type=2000 audit(1370618465.698:1): initialized > [ 0.839204] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 0.839673] VFS: Disk quotas dquot_6.5.2 > [ 0.839760] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 0.840528] NFS: Registering the id_resolver key type > [ 0.840553] Key type id_resolver registered > [ 0.840558] Key type id_legacy registered > [ 0.840587] NTFS driver 2.1.30 [Flags: R/W]. > [ 0.840919] msgmni has been set to 1982 > [ 0.841082] SELinux: Registering netfilter hooks > [ 0.842697] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) > [ 0.842706] io scheduler noop registered > [ 0.842710] io scheduler deadline registered > [ 0.842772] io scheduler cfq registered (default) > [ 0.843309] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 0.846284] intel_idle: does not run on family 6 model 42 > [ 0.846299] ioatdma: Intel(R) QuickData Technology Driver 4.00 > [ 0.847400] pcifront pci-0: Installing PCI frontend > [ 0.847417] Warning: only able to allocate 4 MB for software IO TLB > [ 0.850807] software IO TLB [mem 0x109000000-0x109400000] (4MB) mapped at [ffff880109000000-ffff8801093fffff] > [ 0.851175] pcifront pci-0: Creating PCI Frontend Bus 0000:00 > [ 0.851458] pcifront pci-0: PCI host bridge to bus 0000:00 > [ 0.851469] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] > [ 0.851478] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] > [ 0.851487] pci_bus 0000:00: root bus resource [bus 00] > [ 0.852031] pci 0000:00:00.0: [8086:105e] type 00 class 0x020000 > [ 0.852419] pci 0000:00:00.0: reg 0x10: [mem 0xfe4a0000-0xfe4bffff] > [ 0.852631] pci 0000:00:00.0: reg 0x14: [mem 0xfe480000-0xfe49ffff] > [ 0.852743] pci 0000:00:00.0: reg 0x18: [io 0xe020-0xe03f] > [ 0.853905] pcifront pci-0: New device on 0000:00:00.0 found. > [ 0.857483] pcifront pci-0: claiming resource 0000:00:00.0/0 > [ 0.857490] pcifront pci-0: claiming resource 0000:00:00.0/1 > [ 0.857495] pcifront pci-0: claiming resource 0000:00:00.0/2 > [ 0.939621] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.942227] Non-volatile memory driver v1.3 > [ 0.942414] Linux agpgart interface v0.103 > [ 0.943295] [drm] Initialized drm 1.1.0 20060810 > [ 0.947952] loop: module loaded > [ 0.948577] libphy: Fixed MDIO Bus: probed > [ 0.948583] tun: Universal TUN/TAP device driver, 1.6 > [ 0.948588] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> > [ 0.948913] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.7.12-k > [ 0.948921] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation. > [ 0.950031] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 0.950039] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 > [ 0.950061] ehci-pci: EHCI PCI platform driver > [ 0.950201] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 0.950207] ohci_hcd: block sizes: ed 80 td 96 > [ 0.950357] uhci_hcd: USB Universal Host Controller Interface driver > [ 0.950736] usbcore: registered new interface driver usblp > [ 0.951285] i8042: PNP: No PS/2 controller found. Probing ports directly. > [ 1.960646] i8042: No controller found > [ 1.960872] mousedev: PS/2 mouse device common for all mice > [ 2.021775] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 > [ 2.021941] rtc_cmos: probe of rtc_cmos failed with error -38 > [ 2.023233] zram: Created 1 device(s) ... > [ 2.023567] Netfilter messages via NETLINK v0.30. > [ 2.023612] nf_conntrack version 0.5.0 (7930 buckets, 31720 max) > [ 2.023775] ctnetlink v0.93: registering with nfnetlink. > [ 2.024045] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 2.024170] TCP: cubic registered > [ 2.024177] Initializing XFRM netlink socket > [ 2.024379] NET: Registered protocol family 10 > [ 2.024936] ip6_tables: (C) 2000-2006 Netfilter Core Team > [ 2.025259] sit: IPv6 over IPv4 tunneling driver > [ 2.026039] NET: Registered protocol family 17 > [ 2.026320] Key type dns_resolver registered > [ 2.026874] PM: Hibernation image not present or could not be loaded. > [ 2.026922] registered taskstats version 1 > [ 2.027005] kmemleak: Kernel memory leak detector initialized > [ 2.027009] kmemleak: Automatic memory scanning thread started > [ 2.027437] XENBUS: Device with no driver: device/vbd/51712 > [ 2.027537] Magic number: 1:252:3141 > [ 2.029169] Freeing unused kernel memory: 1724k freed > [ 2.029408] Write protecting the kernel read-only data: 10240k > [ 2.033649] Freeing unused kernel memory: 1480k freed > [ 2.033908] Freeing unused kernel memory: 72k freed > [ 2.040621] consoletype (1038) used greatest stack depth: 5304 bytes left > [ 2.059689] chmod (1044) used greatest stack depth: 4856 bytes left > [ 2.266374] Initialising Xen virtual ethernet driver. > [ 2.273190] vbd vbd-51712: blkfront:blkback_changed to state 2. > [ 2.283349] vbd vbd-51712: blkfront:blkback_changed to state 4. > [ 2.283356] vbd vbd-51712: blkfront_connect:/local/domain/0/backend/vbd/2/51712. > [ 2.287707] blkfront: xvda: flush diskcache: enabled; persistent grants: enabled; indirect descriptors: enabled; > [ 2.288337] Entered do_blkif_request > [ 2.288344] Entered do_blkif_request > [ 2.288821] Entered do_blkif_request > [ 2.288829] do_blk_req ffff880108ec9e10: cmd ffff880108ec9f00, sec 0, (4/4) buffer:ffff880108ee6000 [read] > [ 2.288839] Entered do_blkif_request > [ 2.288859] Entered do_blkif_request > [ 2.288864] do_blk_req ffff880108ec9cb8: cmd ffff880108ec9da8, sec 4, (4/4) buffer:ffff880108ee6800 [read] > [ 2.288871] Entered do_blkif_request > [ 2.292721] Entered do_blkif_request > [ 2.292727] Entered do_blkif_request > [ 2.292737] Entered do_blkif_request > [ 2.292741] Entered do_blkif_request > [ 2.292780] Entered do_blkif_request > [ 2.292786] do_blk_req ffff880108ec9cb8: cmd ffff880108ec9da8, sec 8, (4/4) buffer:ffff88010f273000 [read] > [ 2.292794] Entered do_blkif_request > [ 2.292811] Entered do_blkif_request > [ 2.292816] do_blk_req ffff880108ec9e10: cmd ffff880108ec9f00, sec c, (4/4) buffer:ffff88010f273800 [read] > [ 2.292822] Entered do_blkif_request > [ 2.292940] Entered do_blkif_request > [ 2.292947] Entered do_blkif_request > [ 2.292957] Entered do_blkif_request > [ 2.292961] Entered do_blkif_request > [ 2.292974] xvda: unknown partition table > [ 2.385804] udevd (1099): /proc/1099/oom_adj is deprecated, please use /proc/1099/oom_score_adj instead. > [ 2.444038] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k > [ 2.444061] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. > [ 2.444110] e1000e 0000:00:00.0: Disabling ASPM L1 > [ 2.444232] e1000e 0000:00:00.0: enabling device (0000 -> 0002) > [ 2.447244] e1000e 0000:00:00.0: Xen PCI mapped GSI16 to IRQ34 > [ 2.447790] e1000e 0000:00:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode > [ 2.459644] vbd vbd-51712: command: 0x5331, argument: 0x0 > [ 2.560213] ip (1325) used greatest stack depth: 3760 bytes left > [ 2.624581] e1000e 0000:00:00.0 eth0: (PCI Express:2.5GT/s:Width x4) 00:15:17:8f:18:a2 > [ 2.624595] e1000e 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection > [ 2.624675] e1000e 0000:00:00.0 eth0: MAC: 0, PHY: 4, PBA No: D50868-003 > [ 2.814571] [drm] radeon kernel modesetting enabled. > [ 3.394987] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 3.397647] device eth0 entered promiscuous mode > [ 3.452997] IPv6: ADDRCONF(NETDEV_UP): switch: link is not ready > [ 5.533965] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx > [ 5.534117] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [ 5.534222] switch: port 1(eth0) entered forwarding state > [ 5.534239] switch: port 1(eth0) entered forwarding state > [ 5.534302] IPv6: ADDRCONF(NETDEV_CHANGE): switch: link becomes ready > [ 9.129856] SCSI subsystem initialized > [ 9.131318] Loading iSCSI transport class v2.0-870. > [ 9.134894] iscsi: registered transport (tcp) > [ 9.176036] Event-channel device installed. > [ 9.336320] mount.nfs (2304) used greatest stack depth: 3320 bytes left > [ 9.669091] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com > [ 9.670252] device-mapper: multipath: version 1.5.1 loaded > [ 20.576092] switch: port 1(eth0) entered forwarding state > # lspci > 00:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) > # ifconfig > eth0 Link encap:Ethernet HWaddr 00:15:17:8F:18:A2 > inet6 addr: fe80::215:17ff:fe8f:18a2/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:116 errors:0 dropped:0 overruns:0 frame:0 > TX packets:141 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:12017 (11.7 KiB) TX bytes:13404 (13.0 KiB) > Interrupt:34 Memory:fe4a0000-fe4c0000 > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:65536 Metric:1 > RX packets:8 errors:0 dropped:0 overruns:0 frame:0 > TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:520 (520.0 b) TX bytes:520 (520.0 b) > > switch Link encap:Ethernet HWaddr 00:15:17:8F:18:A2 > inet addr:192.168.102.210 Bcast:192.168.102.255 Mask:255.255.255.0 > inet6 addr: fe80::215:17ff:fe8f:18a2/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:116 errors:0 dropped:0 overruns:0 frame:0 > TX packets:134 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:9929 (9.6 KiB) TX bytes:12244 (11.9 KiB) > > # eth\b\b\b > # ethtool ^[[J-i eth0 > driver: e1000e > version: 2.3.2-k > firmware-version: 5.11-2 > bus-info: 0000:00:00.0 > # rmmod e1000e > [ 39.032406] switch: port 1(eth0) entered disabled state > [ 39.032576] device eth0 left promiscuous mode > [ 39.032583] switch: port 1(eth0) entered disabled state > # miod\b \b\b \b\b \bodprobe e1000e > [ 42.614015] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k > [ 42.614026] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. > [ 42.614080] e1000e 0000:00:00.0: Disabling ASPM L1 > [ 42.614172] xen_map_pirq_gsi: returning irq 34 for gsi 16 > [ 42.614181] e1000e 0000:00:00.0: Xen PCI mapped GSI16 to IRQ34 > [ 42.615024] e1000e 0000:00:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode > [ 42.790351] e1000e 0000:00:00.0 eth0: (PCI Express:2.5GT/s:Width x4) 00:15:17:8f:18:a2 > [ 42.790363] e1000e 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection > [ 42.790448] e1000e 0000:00:00.0 eth0: MAC: 0, PHY: 4, PBA No: D50868-003 > # [ 43.103936] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 43.106574] device eth0 entered promiscuous mode > rmmod e100[ 45.190968] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx > [ 45.191117] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [ 45.191210] switch: port 1(eth0) entered forwarding state > [ 45.191227] switch: port 1(eth0) entered forwarding state > 0e > [ 46.621376] switch: port 1(eth0) entered disabled state > [ 46.621538] device eth0 left promiscuous mode > [ 46.621547] switch: port 1(eth0) entered disabled state > # > > > > DETACHING HERE.. > > # > # [ 53.802739] pcifront pci-0: Rescanning PCI Frontend Bus 0000:00 > [ 53.887894] pci_bus 0000:00: busn_res: [bus 00] is released > [ 53.888042] ------------[ cut here ]------------ > [ 53.888055] WARNING: at /home/konrad/linux/include/linux/kref.h:47 klist_iter_init_node+0x3e/0x50() > [ 53.888073] Modules linked in: dm_multipath dm_mod xen_evtchn iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi scsi_mod libcrc32c crc32c radeon fbcon tileblit font bitblit softcursor ttm drm_kms_helper crc32c_intel xen_blkfront xen_netfront xen_fbfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_kbdfront xenfs xen_privcmd [last unloaded: e1000e] > [ 53.888151] CPU: 1 PID: 26 Comm: xenwatch Not tainted 3.10.0-rc4upstream-00172-g909fe9e-dirty #2 > [ 53.888158] ffffffff819392b8 ffff88011e3c1b88 ffffffff8167a27d ffff88011e3c1bc8 > [ 53.888171] ffffffff8108d1eb ffff880109536a00 ffff88011e3c1c18 0000000000000000 > [ 53.888186] ffffffff8131c410 0000000000000000 ffff88011e3c1e70 ffff88011e3c1bd8 > [ 53.888197] Call Trace: > [ 53.888203] [<ffffffff8167a27d>] dump_stack+0x19/0x1b > [ 53.888212] [<ffffffff8108d1eb>] warn_slowpath_common+0x6b/0xa0 > [ 53.888220] [<ffffffff8131c410>] ? pci_match_next_bus+0x10/0x10 > [ 53.888227] [<ffffffff8108d235>] warn_slowpath_null+0x15/0x20 > [ 53.888234] [<ffffffff81663b4e>] klist_iter_init_node+0x3e/0x50 > [ 53.888242] [<ffffffff8142117d>] class_dev_iter_init+0x3d/0x50 > [ 53.888248] [<ffffffff81421348>] class_find_device+0x38/0xb0 > [ 53.888255] [<ffffffff8131c8aa>] pci_get_next_root_bus+0x4a/0x80 > [ 53.888262] [<ffffffff8132f6a5>] pcifront_free_roots+0x25/0x60 > [ 53.888268] [<ffffffff8132f6f1>] free_pdev+0x11/0x80 > [ 53.888274] [<ffffffff8132f77a>] pcifront_xenbus_remove+0x1a/0x20 > [ 53.888283] [<ffffffff813abae8>] xenbus_dev_remove+0x38/0x70 > [ 53.888289] [<ffffffff8141ffc1>] __device_release_driver+0x61/0xd0 > [ 53.888296] [<ffffffff81420148>] device_release_driver+0x28/0x40 > [ 53.888302] [<ffffffff8141f296>] bus_remove_device+0x106/0x140 > [ 53.888310] [<ffffffff8141d120>] device_del+0x110/0x1c0 > [ 53.888316] [<ffffffff8141d1e1>] device_unregister+0x11/0x20 > [ 53.888323] [<ffffffff813ab946>] xenbus_dev_changed+0x96/0x1d0 > [ 53.888331] [<ffffffff81048bd6>] ? xen_spin_lock+0xa6/0x110 > [ 53.888338] [<ffffffff813ad2f6>] frontend_changed+0x16/0x20 > [ 53.888345] [<ffffffff813a9c5b>] xenwatch_thread+0xcb/0x190 > [ 53.888352] [<ffffffff810b49d0>] ? wake_up_bit+0x40/0x40 > [ 53.888359] [<ffffffff813a9b90>] ? xs_watch+0x60/0x60 > [ 53.888365] [<ffffffff810b42e6>] kthread+0xc6/0xd0 > [ 53.888371] [<ffffffff8103a149>] ? xen_end_context_switch+0x19/0x20 > [ 53.888378] [<ffffffff810b4220>] ? kthread_freezable_should_stop+0x80/0x80 > [ 53.888386] [<ffffffff8168623c>] ret_from_fork+0x7c/0xb0 > [ 53.888392] [<ffffffff810b4220>] ? kthread_freezable_should_stop+0x80/0x80 > [ 53.888397] ---[ end trace 918a23c9bada3aed ]--- > [ 53.888402] ------------[ cut here ]------------ > [ 53.888407] WARNING: at /home/konrad/linux/lib/klist.c:189 klist_release+0x112/0x120() > [ 53.888412] Modules linked in: dm_multipath dm_mod xen_evtchn iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi scsi_mod libcrc32c crc32c radeon fbcon tileblit font bitblit softcursor ttm drm_kms_helper crc32c_intel xen_blkfront xen_netfront xen_fbfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_kbdfront xenfs xen_privcmd [last unloaded: e1000e] > [ 53.888478] CPU: 1 PID: 26 Comm: xenwatch Tainted: G W 3.10.0-rc4upstream-00172-g909fe9e-dirty #2 > [ 53.888484] ffffffff819a3648 ffff88011e3c1b18 ffffffff8167a27d ffff88011e3c1b58 > [ 53.888495] ffffffff8108d1eb 0000000000000010 ffff880109533aa8 ffff880109533a90 > [ 53.888506] ffffffff81421460 0000000000000000 dead000000100100 ffff88011e3c1b68 > [ 53.888517] Call Trace: > [ 53.888523] [<ffffffff8167a27d>] dump_stack+0x19/0x1b > [ 53.888529] [<ffffffff8108d1eb>] warn_slowpath_common+0x6b/0xa0 > [ 53.888536] [<ffffffff81421460>] ? class_for_each_device+0xa0/0xa0 > [ 53.888543] [<ffffffff8108d235>] warn_slowpath_null+0x15/0x20 > [ 53.888549] [<ffffffff81663c82>] klist_release+0x112/0x120 > [ 53.888556] [<ffffffff81421460>] ? class_for_each_device+0xa0/0xa0 > [ 53.888563] [<ffffffff81663cb8>] klist_dec_and_del+0x28/0x30 > [ 53.888601] [<ffffffff81663eb5>] klist_next+0x45/0x140 > [ 53.888608] [<ffffffff8131c410>] ? pci_match_next_bus+0x10/0x10 > [ 53.888615] [<ffffffff81421108>] class_dev_iter_next+0x18/0x50 > [ 53.888621] [<ffffffff81421358>] class_find_device+0x48/0xb0 > [ 53.888628] [<ffffffff8131c8aa>] pci_get_next_root_bus+0x4a/0x80 > [ 53.888634] [<ffffffff8132f6a5>] pcifront_free_roots+0x25/0x60 > [ 53.888640] [<ffffffff8132f6f1>] free_pdev+0x11/0x80 > [ 53.888646] [<ffffffff8132f77a>] pcifront_xenbus_remove+0x1a/0x20 > [ 53.888653] [<ffffffff813abae8>] xenbus_dev_remove+0x38/0x70 > [ 53.888660] [<ffffffff8141ffc1>] __device_release_driver+0x61/0xd0 > [ 53.888667] [<ffffffff81420148>] device_release_driver+0x28/0x40 > [ 53.888673] [<ffffffff8141f296>] bus_remove_device+0x106/0x140 > [ 53.888680] [<ffffffff8141d120>] device_del+0x110/0x1c0 > [ 53.888688] [<ffffffff8141d1e1>] device_unregister+0x11/0x20 > [ 53.888694] [<ffffffff813ab946>] xenbus_dev_changed+0x96/0x1d0 > [ 53.888701] [<ffffffff81048bd6>] ? xen_spin_lock+0xa6/0x110 > [ 53.888708] [<ffffffff813ad2f6>] frontend_changed+0x16/0x20 > [ 53.888714] [<ffffffff813a9c5b>] xenwatch_thread+0xcb/0x190 > [ 53.888721] [<ffffffff810b49d0>] ? wake_up_bit+0x40/0x40 > [ 53.888727] [<ffffffff813a9b90>] ? xs_watch+0x60/0x60 > [ 53.888733] [<ffffffff810b42e6>] kthread+0xc6/0xd0 > [ 53.888739] [<ffffffff8103a149>] ? xen_end_context_switch+0x19/0x20 > [ 53.888746] [<ffffffff810b4220>] ? kthread_freezable_should_stop+0x80/0x80 > [ 53.888755] [<ffffffff8168623c>] ret_from_fork+0x7c/0xb0 > [ 53.888761] [<ffffffff810b4220>] ? kthread_freezable_should_stop+0x80/0x80 > [ 53.888766] ---[ end trace 918a23c9bada3aee ]--- > [ 53.888776] general protection fault: 0000 [#1] SMP > [ 53.888783] Modules linked in: dm_multipath dm_mod xen_evtchn iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi scsi_mod libcrc32c crc32c radeon fbcon tileblit font bitblit softcursor ttm drm_kms_helper crc32c_intel xen_blkfront xen_netfront xen_fbfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_kbdfront xenfs xen_privcmd [last unloaded: e1000e] > [ 53.888847] CPU: 1 PID: 26 Comm: xenwatch Tainted: G W 3.10.0-rc4upstream-00172-g909fe9e-dirty #2 > [ 53.888853] task: ffff88011e2eb800 ti: ffff88011e3c0000 task.ti: ffff88011e3c0000 > [ 53.888859] RIP: e030:[<ffffffff81663baa>] [<ffffffff81663baa>] klist_release+0x3a/0x120 > [ 53.888867] RSP: e02b:ffff88011e3c1b78 EFLAGS: 00010292 > [ 53.888872] RAX: dead000000200200 RBX: ffff880109533aa8 RCX: 0000006c3739ee67 > [ 53.888877] RDX: dead000000100100 RSI: dead000000200200 RDI: dead000000100100 > [ 53.888882] RBP: ffff88011e3c1b98 R08: 00000000a589f9bc R09: 0720072007200720 > [ 53.888887] R10: 0720072007200720 R11: 0720072007200720 R12: ffff880109533a90 > [ 53.888892] R13: ffffffff81421460 R14: 0000000000000000 R15: dead000000100100 > [ 53.888900] FS: 00007fe6ef1d97a0(0000) GS:ffff88011f900000(0000) knlGS:0000000000000000 > [ 53.888907] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 53.888912] CR2: 00007f1c4090ddd0 CR3: 000000010f0cd000 CR4: 0000000000042660 > [ 53.888917] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 53.888923] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > [ 53.888928] Stack: > [ 53.888932] ffff880109533a90 ffff88011e3c1c18 ffff880109533a90 ffffffff81421460 > [ 53.888943] ffff88011e3c1ba8 ffffffff81663cb8 ffff88011e3c1be8 ffffffff81663eb5 > [ 53.888954] 0000000000000000 ffff88011e3c1c18 0000000000000000 ffffffff8131c410 > [ 53.888965] Call Trace: > [ 53.888971] [<ffffffff81421460>] ? class_for_each_device+0xa0/0xa0 > [ 53.888978] [<ffffffff81663cb8>] klist_dec_and_del+0x28/0x30 > [ 53.888985] [<ffffffff81663eb5>] klist_next+0x45/0x140 > [ 53.888992] [<ffffffff8131c410>] ? pci_match_next_bus+0x10/0x10 > [ 53.888999] [<ffffffff81421108>] class_dev_iter_next+0x18/0x50 > [ 53.889006] [<ffffffff81421358>] class_find_device+0x48/0xb0 > [ 53.889012] [<ffffffff8131c8aa>] pci_get_next_root_bus+0x4a/0x80 > [ 53.889020] [<ffffffff8132f6a5>] pcifront_free_roots+0x25/0x60 > [ 53.889026] [<ffffffff8132f6f1>] free_pdev+0x11/0x80 > [ 53.889032] [<ffffffff8132f77a>] pcifront_xenbus_remove+0x1a/0x20 > [ 53.889039] [<ffffffff813abae8>] xenbus_dev_remove+0x38/0x70 > [ 53.889046] [<ffffffff8141ffc1>] __device_release_driver+0x61/0xd0 > [ 53.889054] [<ffffffff81420148>] device_release_driver+0x28/0x40 > [ 53.889062] [<ffffffff8141f296>] bus_remove_device+0x106/0x140 > [ 53.889064] [<ffffffff8141d120>] device_del+0x110/0x1c0 > [ 53.889064] [<ffffffff8141d1e1>] device_unregister+0x11/0x20 > [ 53.889064] [<ffffffff813ab946>] xenbus_dev_changed+0x96/0x1d0 > [ 53.889064] [<ffffffff81048bd6>] ? xen_spin_lock+0xa6/0x110 > [ 53.889064] [<ffffffff813ad2f6>] frontend_changed+0x16/0x20 > [ 53.889064] [<ffffffff813a9c5b>] xenwatch_thread+0xcb/0x190 > [ 53.889064] [<ffffffff810b49d0>] ? wake_up_bit+0x40/0x40 > [ 53.889064] [<ffffffff813a9b90>] ? xs_watch+0x60/0x60 > [ 53.889064] [<ffffffff810b42e6>] kthread+0xc6/0xd0 > [ 53.889064] [<ffffffff8103a149>] ? xen_end_context_switch+0x19/0x20 > [ 53.889064] [<ffffffff810b4220>] ? kthread_freezable_should_stop+0x80/0x80 > [ 53.889064] [<ffffffff8168623c>] ret_from_fork+0x7c/0xb0 > [ 53.889064] [<ffffffff810b4220>] ? kthread_freezable_should_stop+0x80/0x80 > [ 53.889064] Code: fb 48 83 ec 08 f6 47 e8 01 0f 84 e3 00 00 00 48 8b 43 f8 48 8b 53 f0 48 bf 00 01 10 00 00 00 ad de 48 be 00 02 20 00 00 00 ad de <48> 89 42 08 48 89 10 48 89 7b f0 48 89 73 f8 48 c7 c7 54 44 d7 > [ 53.889064] RIP [<ffffffff81663baa>] klist_release+0x3a/0x120 > [ 53.889064] RSP <ffff88011e3c1b78> > [ 53.889285] ---[ end trace 918a23c9bada3aef ]--- > [ 53.889290] BUG: sleeping function called from invalid context at /home/konrad/linux/kernel/rwsem.c:20 > [ 53.889296] in_atomic(): 1, irqs_disabled(): 0, pid: 26, name: xenwatch > [ 53.889302] CPU: 1 PID: 26 Comm: xenwatch Tainted: G D W 3.10.0-rc4upstream-00172-g909fe9e-dirty #2 > [ 53.889307] 000000000000000b ffff88011e3c1928 ffffffff8167a27d ffff88011e3c1938 > [ 53.889319] ffffffff810bf5a8 ffff88011e3c1958 ffffffff8167b56f 0720072007200720 > [ 53.889331] ffff88011e2eb800 ffff88011e3c1998 ffffffff810a279a 0000000000000000 > [ 53.889342] Call Trace: > [ 53.889347] [<ffffffff8167a27d>] dump_stack+0x19/0x1b > [ 53.889354] [<ffffffff810bf5a8>] __might_sleep+0xd8/0x100 > [ 53.889360] [<ffffffff8167b56f>] down_read+0x1f/0x40 > [ 53.889368] [<ffffffff810a279a>] exit_signals+0x2a/0x170 > [ 53.889374] [<ffffffff81091ddf>] do_exit+0xaf/0xbe0 > [ 53.889380] [<ffffffff8167a12e>] ? printk+0x48/0x4a > [ 53.889387] [<ffffffff810423f2>] ? check_events+0x12/0x20 > [ 53.889394] [<ffffffff8167f220>] oops_end+0xb0/0xf0 > [ 53.889401] [<ffffffff8104da06>] die+0x56/0x90 > [ 53.889407] [<ffffffff8167effc>] do_general_protection+0xdc/0x160 > [ 53.889414] [<ffffffff81421460>] ? class_for_each_device+0xa0/0xa0 > [ 53.889420] [<ffffffff8167e668>] general_protection+0x28/0x30 > [ 53.889427] [<ffffffff81421460>] ? class_for_each_device+0xa0/0xa0 > [ 53.889434] [<ffffffff81663baa>] ? klist_release+0x3a/0x120 > [ 53.889441] [<ffffffff81663c82>] ? klist_release+0x112/0x120 > [ 53.889447] [<ffffffff81421460>] ? class_for_each_device+0xa0/0xa0 > [ 53.889454] [<ffffffff81663cb8>] klist_dec_and_del+0x28/0x30 > [ 53.889461] [<ffffffff81663eb5>] klist_next+0x45/0x140 > [ 53.889467] [<ffffffff8131c410>] ? pci_match_next_bus+0x10/0x10 > [ 53.889473] [<ffffffff81421108>] class_dev_iter_next+0x18/0x50 > [ 53.889480] [<ffffffff81421358>] class_find_device+0x48/0xb0 > [ 53.889486] [<ffffffff8131c8aa>] pci_get_next_root_bus+0x4a/0x80 > [ 53.889493] [<ffffffff8132f6a5>] pcifront_free_roots+0x25/0x60 > [ 54.002497] [<ffffffff8132f6f1>] free_pdev+0x11/0x80 > [ 54.002505] [<ffffffff8132f77a>] pcifront_xenbus_remove+0x1a/0x20 > [ 54.002516] [<ffffffff813abae8>] xenbus_dev_remove+0x38/0x70 > [ 54.002524] [<ffffffff8141ffc1>] __device_release_driver+0x61/0xd0 > [ 54.002530] [<ffffffff81420148>] device_release_driver+0x28/0x40 > [ 54.002537] [<ffffffff8141f296>] bus_remove_device+0x106/0x140 > [ 54.002544] [<ffffffff8141d120>] device_del+0x110/0x1c0 > [ 54.002551] [<ffffffff8141d1e1>] device_unregister+0x11/0x20 > [ 54.002558] [<ffffffff813ab946>] xenbus_dev_changed+0x96/0x1d0 > [ 54.002567] [<ffffffff81048bd6>] ? xen_spin_lock+0xa6/0x110 > [ 54.002574] [<ffffffff813ad2f6>] frontend_changed+0x16/0x20 > [ 54.002581] [<ffffffff813a9c5b>] xenwatch_thread+0xcb/0x190 > [ 54.002588] [<ffffffff810b49d0>] ? wake_up_bit+0x40/0x40 > [ 54.002595] [<ffffffff813a9b90>] ? xs_watch+0x60/0x60 > [ 54.002601] [<ffffffff810b42e6>] kthread+0xc6/0xd0 > [ 54.002607] [<ffffffff8103a149>] ? xen_end_context_switch+0x19/0x20 > [ 54.002615] [<ffffffff810b4220>] ? kthread_freezable_should_stop+0x80/0x80 > [ 54.002624] [<ffffffff8168623c>] ret_from_fork+0x7c/0xb0 > [ 54.002630] [<ffffffff810b4220>] ? kthread_freezable_should_stop+0x80/0x80 > [ 54.002637] note: xenwatch[26] exited with preempt_count 1 > > # > # > ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH v2, part3 07/11] PCI, xen-pcifront: use new PCI interfaces to simplify implementation 2013-06-07 16:50 ` Jiang Liu @ 2013-06-07 17:07 ` Konrad Rzeszutek Wilk 2013-06-09 16:50 ` Jiang Liu 0 siblings, 1 reply; 12+ messages in thread From: Konrad Rzeszutek Wilk @ 2013-06-07 17:07 UTC (permalink / raw) To: Jiang Liu Cc: Jeremy Fitzhardinge, xen-devel, Toshi Kani, Jiang Liu, Myron Stowe, Greg Kroah-Hartman, linux-kernel, virtualization, Rafael J . Wysocki, Gu Zheng, Yijing Wang, linux-pci, Bjorn Helgaas, Yinghai Lu On Sat, Jun 08, 2013 at 12:50:31AM +0800, Jiang Liu wrote: > On 06/07/2013 11:38 PM, Konrad Rzeszutek Wilk wrote: > > On Fri, Jun 07, 2013 at 10:50:24AM -0400, Konrad Rzeszutek Wilk wrote: > >> On Thu, May 16, 2013 at 11:50:55PM +0800, Jiang Liu wrote: > >>> Use new PCI interfaces to simplify xen-pcifront implementation: > >>> 1) Use pci_create_root_bus() instead of pci_scan_bus_parented() > >>> because pci_scan_bus_parented() is marked as __deprecated.This > >>> also gets rid of a duplicated call of pci_bus_start_devices(). > >>> 2) Use pci_stop_root_bus() and pci_remove_root_bus() instead of > >>> open-coded private implementation. > >>> 3) Use pci_set_host_bridge_release() to release data structures > >>> associated with PCI root buses. > >>> 4) Use pci_bus_get()/pci_bus_put() to manage PCI root bus reference > >>> count. > >>> > >>> This is also a preparation for coming PCI bus lock enhancement. > > > > With this patch from : > > > > Merge branch 'pci_lock_v3' of https://github.com/jiangliu/linux into testing > > > > > > it blows up when detaching the device. > Hi Konrad, > Thanks for testing! According to the log messages, this issue should > be related to pci bus reference counter management. Seems we have done > an extra(unbalanced) release of pci bus device. > Will investigate it tomorrow! That is quite commendable that you are willing to look over this on the weekend but I am not going to be able to rerun this test until some time in the week. You could enjoy the weekend and just look at this during the week. ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH v2, part3 07/11] PCI, xen-pcifront: use new PCI interfaces to simplify implementation 2013-06-07 17:07 ` Konrad Rzeszutek Wilk @ 2013-06-09 16:50 ` Jiang Liu 2013-06-10 16:58 ` Konrad Rzeszutek Wilk 0 siblings, 1 reply; 12+ messages in thread From: Jiang Liu @ 2013-06-09 16:50 UTC (permalink / raw) To: Konrad Rzeszutek Wilk Cc: Bjorn Helgaas, Yinghai Lu, Jiang Liu, Rafael J . Wysocki, Greg Kroah-Hartman, Gu Zheng, Toshi Kani, Myron Stowe, Yijing Wang, linux-pci, linux-kernel, Jeremy Fitzhardinge, xen-devel, virtualization On Sat 08 Jun 2013 01:07:06 AM CST, Konrad Rzeszutek Wilk wrote: > On Sat, Jun 08, 2013 at 12:50:31AM +0800, Jiang Liu wrote: >> On 06/07/2013 11:38 PM, Konrad Rzeszutek Wilk wrote: >>> On Fri, Jun 07, 2013 at 10:50:24AM -0400, Konrad Rzeszutek Wilk wrote: >>>> On Thu, May 16, 2013 at 11:50:55PM +0800, Jiang Liu wrote: >>>>> Use new PCI interfaces to simplify xen-pcifront implementation: >>>>> 1) Use pci_create_root_bus() instead of pci_scan_bus_parented() >>>>> because pci_scan_bus_parented() is marked as __deprecated.This >>>>> also gets rid of a duplicated call of pci_bus_start_devices(). >>>>> 2) Use pci_stop_root_bus() and pci_remove_root_bus() instead of >>>>> open-coded private implementation. >>>>> 3) Use pci_set_host_bridge_release() to release data structures >>>>> associated with PCI root buses. >>>>> 4) Use pci_bus_get()/pci_bus_put() to manage PCI root bus reference >>>>> count. >>>>> >>>>> This is also a preparation for coming PCI bus lock enhancement. >>> >>> With this patch from : >>> >>> Merge branch 'pci_lock_v3' of https://github.com/jiangliu/linux into testing >>> >>> >>> it blows up when detaching the device. >> Hi Konrad, >> Thanks for testing! According to the log messages, this issue should >> be related to pci bus reference counter management. Seems we have done >> an extra(unbalanced) release of pci bus device. >> Will investigate it tomorrow! > > That is quite commendable that you are willing to look over this on > the weekend but I am not going to be able to rerun this test until > some time in the week. You could enjoy the weekend and just look at > this during the week. Hi Konrad, We should have root-caused this bug, which is caused by for_each_pci_root_bus(). Current implementation doesn't support root bus deletion when walking PCI root buses by for_each_pci_root_bus(). The reference counter (pci_bus->dev.knode_class.n_ref) becomes zero after returning from pci_remove_root_bus(), so it triggers kref warnings and double-free of klist_node object when we call pci_get_next_root_bus() to get the next PCI root bus. So we will first revert to list_for_each_entry_safe(bus, temp, &pci_root_buses, node) and solve this issue in next version of for_each_pci_root_bus(). Regards! Gerry --- diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c index 6aa2c0f..6e577db 100644 --- a/drivers/pci/xen-pcifront.c +++ b/drivers/pci/xen-pcifront.c @@ -553,11 +553,11 @@ static int pcifront_rescan_root(struct pcifront_device *pdev, static void pcifront_free_roots(struct pcifront_device *pdev) { struct pcifront_sd *sd; - struct pci_bus *bus; + struct pci_bus *bus, *temp; dev_dbg(&pdev->xdev->dev, "cleaning up root buses\n"); - for_each_pci_root_bus(bus) { + list_for_each_entry_safe(bus, temp, &pci_root_buses, node) { sd = bus->sysdata; if (sd->pdev == pdev) { pci_stop_root_bus(bus); --- ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [RFC PATCH v2, part3 07/11] PCI, xen-pcifront: use new PCI interfaces to simplify implementation 2013-06-09 16:50 ` Jiang Liu @ 2013-06-10 16:58 ` Konrad Rzeszutek Wilk 2013-06-10 17:08 ` Jiang Liu 0 siblings, 1 reply; 12+ messages in thread From: Konrad Rzeszutek Wilk @ 2013-06-10 16:58 UTC (permalink / raw) To: Jiang Liu Cc: Jeremy Fitzhardinge, xen-devel, Toshi Kani, Jiang Liu, Myron Stowe, Greg Kroah-Hartman, linux-kernel, virtualization, Rafael J . Wysocki, Gu Zheng, Yijing Wang, linux-pci, Bjorn Helgaas, Yinghai Lu On Mon, Jun 10, 2013 at 12:50:46AM +0800, Jiang Liu wrote: > On Sat 08 Jun 2013 01:07:06 AM CST, Konrad Rzeszutek Wilk wrote: > > On Sat, Jun 08, 2013 at 12:50:31AM +0800, Jiang Liu wrote: > >> On 06/07/2013 11:38 PM, Konrad Rzeszutek Wilk wrote: > >>> On Fri, Jun 07, 2013 at 10:50:24AM -0400, Konrad Rzeszutek Wilk wrote: > >>>> On Thu, May 16, 2013 at 11:50:55PM +0800, Jiang Liu wrote: > >>>>> Use new PCI interfaces to simplify xen-pcifront implementation: > >>>>> 1) Use pci_create_root_bus() instead of pci_scan_bus_parented() > >>>>> because pci_scan_bus_parented() is marked as __deprecated.This > >>>>> also gets rid of a duplicated call of pci_bus_start_devices(). > >>>>> 2) Use pci_stop_root_bus() and pci_remove_root_bus() instead of > >>>>> open-coded private implementation. > >>>>> 3) Use pci_set_host_bridge_release() to release data structures > >>>>> associated with PCI root buses. > >>>>> 4) Use pci_bus_get()/pci_bus_put() to manage PCI root bus reference > >>>>> count. > >>>>> > >>>>> This is also a preparation for coming PCI bus lock enhancement. > >>> > >>> With this patch from : > >>> > >>> Merge branch 'pci_lock_v3' of https://github.com/jiangliu/linux into testing > >>> > >>> > >>> it blows up when detaching the device. > >> Hi Konrad, > >> Thanks for testing! According to the log messages, this issue should > >> be related to pci bus reference counter management. Seems we have done > >> an extra(unbalanced) release of pci bus device. > >> Will investigate it tomorrow! > > > > That is quite commendable that you are willing to look over this on > > the weekend but I am not going to be able to rerun this test until > > some time in the week. You could enjoy the weekend and just look at > > this during the week. > > Hi Konrad, > We should have root-caused this bug, which is caused by > for_each_pci_root_bus(). > Current implementation doesn't support root bus deletion when walking > PCI root > buses by for_each_pci_root_bus(). The reference counter > (pci_bus->dev.knode_class.n_ref) > becomes zero after returning from pci_remove_root_bus(), so it triggers > kref warnings > and double-free of klist_node object when we call > pci_get_next_root_bus() to get the > next PCI root bus. > So we will first revert to list_for_each_entry_safe(bus, temp, > &pci_root_buses, node) > and solve this issue in next version of for_each_pci_root_bus(). That definitly solves the issue. Thanks! I used pci_lock_v3 of https://github.com/jiangliu/linux and the fix below. Is there a new patchset you are going to be posting or a git branch that I can look over? Thanks. ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH v2, part3 07/11] PCI, xen-pcifront: use new PCI interfaces to simplify implementation 2013-06-10 16:58 ` Konrad Rzeszutek Wilk @ 2013-06-10 17:08 ` Jiang Liu 2013-06-14 18:07 ` Konrad Rzeszutek Wilk 0 siblings, 1 reply; 12+ messages in thread From: Jiang Liu @ 2013-06-10 17:08 UTC (permalink / raw) To: Konrad Rzeszutek Wilk Cc: Jeremy Fitzhardinge, xen-devel, Toshi Kani, Jiang Liu, Myron Stowe, Greg Kroah-Hartman, linux-kernel, virtualization, Rafael J . Wysocki, Gu Zheng, Yijing Wang, linux-pci, Bjorn Helgaas, Yinghai Lu On Tue 11 Jun 2013 12:58:01 AM CST, Konrad Rzeszutek Wilk wrote: > On Mon, Jun 10, 2013 at 12:50:46AM +0800, Jiang Liu wrote: >> On Sat 08 Jun 2013 01:07:06 AM CST, Konrad Rzeszutek Wilk wrote: >>> On Sat, Jun 08, 2013 at 12:50:31AM +0800, Jiang Liu wrote: >>>> On 06/07/2013 11:38 PM, Konrad Rzeszutek Wilk wrote: >>>>> On Fri, Jun 07, 2013 at 10:50:24AM -0400, Konrad Rzeszutek Wilk wrote: >>>>>> On Thu, May 16, 2013 at 11:50:55PM +0800, Jiang Liu wrote: >>>>>>> Use new PCI interfaces to simplify xen-pcifront implementation: >>>>>>> 1) Use pci_create_root_bus() instead of pci_scan_bus_parented() >>>>>>> because pci_scan_bus_parented() is marked as __deprecated.This >>>>>>> also gets rid of a duplicated call of pci_bus_start_devices(). >>>>>>> 2) Use pci_stop_root_bus() and pci_remove_root_bus() instead of >>>>>>> open-coded private implementation. >>>>>>> 3) Use pci_set_host_bridge_release() to release data structures >>>>>>> associated with PCI root buses. >>>>>>> 4) Use pci_bus_get()/pci_bus_put() to manage PCI root bus reference >>>>>>> count. >>>>>>> >>>>>>> This is also a preparation for coming PCI bus lock enhancement. >>>>> >>>>> With this patch from : >>>>> >>>>> Merge branch 'pci_lock_v3' of https://github.com/jiangliu/linux into testing >>>>> >>>>> >>>>> it blows up when detaching the device. >>>> Hi Konrad, >>>> Thanks for testing! According to the log messages, this issue should >>>> be related to pci bus reference counter management. Seems we have done >>>> an extra(unbalanced) release of pci bus device. >>>> Will investigate it tomorrow! >>> >>> That is quite commendable that you are willing to look over this on >>> the weekend but I am not going to be able to rerun this test until >>> some time in the week. You could enjoy the weekend and just look at >>> this during the week. >> >> Hi Konrad, >> We should have root-caused this bug, which is caused by >> for_each_pci_root_bus(). >> Current implementation doesn't support root bus deletion when walking >> PCI root >> buses by for_each_pci_root_bus(). The reference counter >> (pci_bus->dev.knode_class.n_ref) >> becomes zero after returning from pci_remove_root_bus(), so it triggers >> kref warnings >> and double-free of klist_node object when we call >> pci_get_next_root_bus() to get the >> next PCI root bus. >> So we will first revert to list_for_each_entry_safe(bus, temp, >> &pci_root_buses, node) >> and solve this issue in next version of for_each_pci_root_bus(). > > That definitly solves the issue. Thanks! > > I used pci_lock_v3 of https://github.com/jiangliu/linux and the fix > below. > > Is there a new patchset you are going to be posting or a git branch > that I can look over? > > Thanks. Hi Konrad, Really appreciate your support! I will try to post a new version tomorrow, but I think there won't be big changes except addressing some review comments from you. Thanks! Gerry ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH v2, part3 07/11] PCI, xen-pcifront: use new PCI interfaces to simplify implementation 2013-06-10 17:08 ` Jiang Liu @ 2013-06-14 18:07 ` Konrad Rzeszutek Wilk 0 siblings, 0 replies; 12+ messages in thread From: Konrad Rzeszutek Wilk @ 2013-06-14 18:07 UTC (permalink / raw) To: Jiang Liu Cc: Jeremy Fitzhardinge, xen-devel, Toshi Kani, Jiang Liu, Myron Stowe, Greg Kroah-Hartman, linux-kernel, virtualization, Rafael J . Wysocki, Gu Zheng, Yijing Wang, linux-pci, Bjorn Helgaas, Yinghai Lu On Tue, Jun 11, 2013 at 01:08:14AM +0800, Jiang Liu wrote: > On Tue 11 Jun 2013 12:58:01 AM CST, Konrad Rzeszutek Wilk wrote: > > On Mon, Jun 10, 2013 at 12:50:46AM +0800, Jiang Liu wrote: > >> On Sat 08 Jun 2013 01:07:06 AM CST, Konrad Rzeszutek Wilk wrote: > >>> On Sat, Jun 08, 2013 at 12:50:31AM +0800, Jiang Liu wrote: > >>>> On 06/07/2013 11:38 PM, Konrad Rzeszutek Wilk wrote: > >>>>> On Fri, Jun 07, 2013 at 10:50:24AM -0400, Konrad Rzeszutek Wilk wrote: > >>>>>> On Thu, May 16, 2013 at 11:50:55PM +0800, Jiang Liu wrote: > >>>>>>> Use new PCI interfaces to simplify xen-pcifront implementation: > >>>>>>> 1) Use pci_create_root_bus() instead of pci_scan_bus_parented() > >>>>>>> because pci_scan_bus_parented() is marked as __deprecated.This > >>>>>>> also gets rid of a duplicated call of pci_bus_start_devices(). > >>>>>>> 2) Use pci_stop_root_bus() and pci_remove_root_bus() instead of > >>>>>>> open-coded private implementation. > >>>>>>> 3) Use pci_set_host_bridge_release() to release data structures > >>>>>>> associated with PCI root buses. > >>>>>>> 4) Use pci_bus_get()/pci_bus_put() to manage PCI root bus reference > >>>>>>> count. > >>>>>>> > >>>>>>> This is also a preparation for coming PCI bus lock enhancement. > >>>>> > >>>>> With this patch from : > >>>>> > >>>>> Merge branch 'pci_lock_v3' of https://github.com/jiangliu/linux into testing > >>>>> > >>>>> > >>>>> it blows up when detaching the device. > >>>> Hi Konrad, > >>>> Thanks for testing! According to the log messages, this issue should > >>>> be related to pci bus reference counter management. Seems we have done > >>>> an extra(unbalanced) release of pci bus device. > >>>> Will investigate it tomorrow! > >>> > >>> That is quite commendable that you are willing to look over this on > >>> the weekend but I am not going to be able to rerun this test until > >>> some time in the week. You could enjoy the weekend and just look at > >>> this during the week. > >> > >> Hi Konrad, > >> We should have root-caused this bug, which is caused by > >> for_each_pci_root_bus(). > >> Current implementation doesn't support root bus deletion when walking > >> PCI root > >> buses by for_each_pci_root_bus(). The reference counter > >> (pci_bus->dev.knode_class.n_ref) > >> becomes zero after returning from pci_remove_root_bus(), so it triggers > >> kref warnings > >> and double-free of klist_node object when we call > >> pci_get_next_root_bus() to get the > >> next PCI root bus. > >> So we will first revert to list_for_each_entry_safe(bus, temp, > >> &pci_root_buses, node) > >> and solve this issue in next version of for_each_pci_root_bus(). > > > > That definitly solves the issue. Thanks! > > > > I used pci_lock_v3 of https://github.com/jiangliu/linux and the fix > > below. > > > > Is there a new patchset you are going to be posting or a git branch > > that I can look over? > > > > Thanks. > Hi Konrad, > Really appreciate your support! I will try to post a new version > tomorrow, > but I think there won't be big changes except addressing some review > comments from you. I also get this: ERROR: "pci_set_host_bridge_release" [drivers/pci/xen-pcifront.ko] undefined! ERROR: "pci_create_root_bus" [drivers/pci/xen-pcifront.ko] undefined! ERROR: "pci_remove_root_bus" [drivers/pci/xen-pcifront.ko] undefined! ERROR: "pci_stop_root_bus" [drivers/pci/xen-pcifront.ko] undefined! when building it as a module. ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH v2, part3 07/11] PCI, xen-pcifront: use new PCI interfaces to simplify implementation 2013-06-07 14:50 ` Konrad Rzeszutek Wilk 2013-06-07 15:17 ` Jiang Liu 2013-06-07 15:38 ` Konrad Rzeszutek Wilk @ 2013-06-07 15:50 ` Jiang Liu 2 siblings, 0 replies; 12+ messages in thread From: Jiang Liu @ 2013-06-07 15:50 UTC (permalink / raw) To: Konrad Rzeszutek Wilk Cc: Bjorn Helgaas, Yinghai Lu, Jiang Liu, Rafael J . Wysocki, Greg Kroah-Hartman, Gu Zheng, Toshi Kani, Myron Stowe, Yijing Wang, linux-pci, linux-kernel, Jeremy Fitzhardinge, xen-devel, virtualization On Fri 07 Jun 2013 10:50:24 PM CST, Konrad Rzeszutek Wilk wrote: > On Thu, May 16, 2013 at 11:50:55PM +0800, Jiang Liu wrote: >> Use new PCI interfaces to simplify xen-pcifront implementation: >> 1) Use pci_create_root_bus() instead of pci_scan_bus_parented() >> because pci_scan_bus_parented() is marked as __deprecated.This >> also gets rid of a duplicated call of pci_bus_start_devices(). >> 2) Use pci_stop_root_bus() and pci_remove_root_bus() instead of >> open-coded private implementation. >> 3) Use pci_set_host_bridge_release() to release data structures >> associated with PCI root buses. >> 4) Use pci_bus_get()/pci_bus_put() to manage PCI root bus reference >> count. >> >> This is also a preparation for coming PCI bus lock enhancement. >> >> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> >> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> >> Cc: Jeremy Fitzhardinge <jeremy@goop.org> >> Cc: xen-devel@lists.xensource.com >> Cc: virtualization@lists.linux-foundation.org >> Cc: linux-pci@vger.kernel.org >> Cc: linux-kernel@vger.kernel.org >> --- >> drivers/pci/xen-pcifront.c | 81 ++++++++++++++++++++++------------------------ >> 1 file changed, 39 insertions(+), 42 deletions(-) >> >> diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c >> index 816cf94..6aa2c0f 100644 >> --- a/drivers/pci/xen-pcifront.c >> +++ b/drivers/pci/xen-pcifront.c ...... >> @@ -480,12 +490,14 @@ static int pcifront_scan_root(struct pcifront_device *pdev, >> goto err_out; >> } >> >> - bus_entry->bus = b; >> + pci_set_host_bridge_release(to_pci_host_bridge(b->bridge), >> + pcifront_release_sd, sd); >> >> - list_add(&bus_entry->list, &pdev->root_buses); >> - >> - /* pci_scan_bus_parented skips devices which do not have a have >> - * devfn==0. The pcifront_scan_bus enumerates all devfn. */ >> + /* >> + * Every PCI physical device should have function 0, but that's not >> + * true for xen. > > That is incorrect. There are two types of backends - one of them will > start at zero, but the other might not. Hi Konrad, Forgive my poor knowledge about Xen:(, so I will skip this change. Regards! Gerry ^ permalink raw reply [flat|nested] 12+ messages in thread
* [RFC PATCH v2, part3 08/11] PCI, xen-pcifront: use PCI bus lock to protect PCI device hotplug [not found] <1368719459-24800-1-git-send-email-jiang.liu@huawei.com> 2013-05-16 15:50 ` [RFC PATCH v2, part3 07/11] PCI, xen-pcifront: use new PCI interfaces to simplify implementation Jiang Liu @ 2013-05-16 15:50 ` Jiang Liu 1 sibling, 0 replies; 12+ messages in thread From: Jiang Liu @ 2013-05-16 15:50 UTC (permalink / raw) To: Bjorn Helgaas, Yinghai Lu Cc: Jeremy Fitzhardinge, xen-devel, Toshi Kani, Jiang Liu, Konrad Rzeszutek Wilk, Greg Kroah-Hartman, linux-kernel, virtualization, Rafael J . Wysocki, Yijing Wang, linux-pci, Gu Zheng, Myron Stowe, Jiang Liu Use PCI bus lock to protect concurrent PCI device hotplug operations. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-pci@vger.kernel.org Cc: linux-kernel@vger.kernel.org --- drivers/pci/xen-pcifront.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c index 6aa2c0f..2b213b3 100644 --- a/drivers/pci/xen-pcifront.c +++ b/drivers/pci/xen-pcifront.c @@ -505,6 +505,7 @@ static int pcifront_scan_root(struct pcifront_device *pdev, /* Create SysFS and notify udev of the devices. Aka: "going live" */ pci_bus_add_devices(b); + pci_bus_unlock(b, true); return err; @@ -538,6 +539,11 @@ static int pcifront_rescan_root(struct pcifront_device *pdev, /* If the bus is unknown, create it. */ return pcifront_scan_root(pdev, domain, bus); + if (pci_bus_lock(b, PCI_BUS_STATE_STOPPING - 1, true) < 0) { + err = -EBUSY; + goto out; + } + err = pcifront_scan_bus(pdev, domain, bus, b); /* Claim resources before going "live" with our devices */ @@ -545,6 +551,9 @@ static int pcifront_rescan_root(struct pcifront_device *pdev, /* Create SysFS and notify udev of the devices. Aka: "going live" */ pci_bus_add_devices(b); + pci_bus_unlock(b, true); + +out: pci_bus_put(b); return err; @@ -559,8 +568,11 @@ static void pcifront_free_roots(struct pcifront_device *pdev) for_each_pci_root_bus(bus) { sd = bus->sysdata; - if (sd->pdev == pdev) { + if (sd->pdev != pdev) + continue; + if (pci_bus_lock(bus, PCI_BUS_STATE_REMOVED - 1, true) == 0) { pci_stop_root_bus(bus); + /* it also unlocks PCI buses */ pci_remove_root_bus(bus); } } @@ -1042,7 +1054,7 @@ static int pcifront_detach_devices(struct pcifront_device *pdev) domain, bus, slot, func); continue; } - pci_stop_and_remove_bus_device(pci_dev); + pci_stop_and_remove_device(pci_dev); pci_dev_put(pci_dev); dev_dbg(&pdev->xdev->dev, -- 1.8.1.2 ^ permalink raw reply related [flat|nested] 12+ messages in thread
end of thread, other threads:[~2013-06-14 18:07 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1368719459-24800-1-git-send-email-jiang.liu@huawei.com>
2013-05-16 15:50 ` [RFC PATCH v2, part3 07/11] PCI, xen-pcifront: use new PCI interfaces to simplify implementation Jiang Liu
2013-06-07 14:50 ` Konrad Rzeszutek Wilk
2013-06-07 15:17 ` Jiang Liu
2013-06-07 15:38 ` Konrad Rzeszutek Wilk
2013-06-07 16:50 ` Jiang Liu
2013-06-07 17:07 ` Konrad Rzeszutek Wilk
2013-06-09 16:50 ` Jiang Liu
2013-06-10 16:58 ` Konrad Rzeszutek Wilk
2013-06-10 17:08 ` Jiang Liu
2013-06-14 18:07 ` Konrad Rzeszutek Wilk
2013-06-07 15:50 ` Jiang Liu
2013-05-16 15:50 ` [RFC PATCH v2, part3 08/11] PCI, xen-pcifront: use PCI bus lock to protect PCI device hotplug Jiang Liu
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).