From: Suravee Suthikulanit <suravee.suthikulpanit@amd.com>
To: Jan Beulich <JBeulich@suse.com>
Cc: Tim Deegan <tim@xen.org>, xen-devel@lists.xen.org
Subject: Re: [PATCH 2/2 v5] iommu/amd: Workaround for erratum 787
Date: Mon, 17 Jun 2013 13:57:37 -0500 [thread overview]
Message-ID: <51BF5C21.9090807@amd.com> (raw)
In-Reply-To: <51B6E43B02000078000DCF70@nat28.tlf.novell.com>
On 6/11/2013 1:47 AM, Jan Beulich wrote:
> The IOMMU interrupt handling in bottom half must clear the PPR log interrupt
> and event log interrupt bits to re-enable the interrupt. This is done by
> writing 1 to the memory mapped register to clear the bit. Due to hardware bug,
> if the driver tries to clear this bit while the IOMMU hardware also setting
> this bit, the conflict will result with the bit being set. If the interrupt
> handling code does not make sure to clear this bit, subsequent changes in the
> event/PPR logs will no longer generating interrupts, and would result if
> buffer overflow. After clearing the bits, the driver must read back
> the register to verify.
>
> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>
> Adjust to apply on top of heavily modified patch 1. Adjust flow to get away
> with a single readl() in each instance of the status register checks.
>
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> v5: Moved most of what accumulated here into patch 1. Rather than looping,
> re-schedule the tasklet to work around the erratum.
> (skipped v4 to remain in sync with patch 1)
>
> --- a/xen/drivers/passthrough/amd/iommu_init.c
> +++ b/xen/drivers/passthrough/amd/iommu_init.c
> @@ -636,6 +636,14 @@ static void iommu_check_event_log(struct
> }
> }
>
> + /*
> + * Workaround for erratum787:
> + * Re-check to make sure the bit has been cleared.
> + */
> + entry = readl(iommu->mmio_base + IOMMU_STATUS_MMIO_OFFSET);
> + if ( entry & IOMMU_STATUS_EVENT_LOG_INT_MASK )
> + tasklet_schedule(&amd_iommu_irq_tasklet);
> +
> spin_unlock_irqrestore(&iommu->lock, flags);
> }
>
> @@ -717,6 +725,14 @@ static void iommu_check_ppr_log(struct a
> }
> }
>
> + /*
> + * Workaround for erratum787:
> + * Re-check to make sure the bit has been cleared.
> + */
> + entry = readl(iommu->mmio_base + IOMMU_STATUS_MMIO_OFFSET);
> + if ( entry & IOMMU_STATUS_PPR_LOG_INT_MASK )
> + tasklet_schedule(&amd_iommu_irq_tasklet);
> +
> spin_unlock_irqrestore(&iommu->lock, flags);
> }
>
>
>
>
Acked: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
next prev parent reply other threads:[~2013-06-17 18:57 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-10 5:05 [PATCH 1/2 V2] iommu/amd: Fix logic for clearing the IOMMU interrupt bits suravee.suthikulpanit
2013-06-10 5:05 ` [PATCH 2/2 V2] iommu/amd: Workaround for erratum 787 suravee.suthikulpanit
2013-06-10 9:35 ` Tim Deegan
2013-06-10 9:47 ` Jan Beulich
2013-06-10 10:40 ` Tim Deegan
2013-06-10 10:53 ` Jan Beulich
2013-06-10 12:43 ` Tim Deegan
2013-06-10 13:23 ` Jan Beulich
2013-06-10 13:41 ` Jan Beulich
2013-06-10 13:56 ` Tim Deegan
2013-06-10 13:55 ` Jan Beulich
2013-06-10 15:03 ` Jan Beulich
2013-06-10 16:31 ` Tim Deegan
2013-06-10 23:13 ` Suravee Suthikulanit
2013-06-11 6:45 ` Jan Beulich
2013-06-11 6:40 ` Jan Beulich
2013-06-11 8:53 ` Tim Deegan
2013-06-10 13:53 ` Suravee Suthikulanit
2013-06-10 13:59 ` Jan Beulich
2013-06-10 15:11 ` Suravee Suthikulanit
2013-06-10 15:21 ` Jan Beulich
2013-06-10 10:59 ` [PATCH 2/2 v3] " Jan Beulich
2013-06-11 6:47 ` [PATCH 2/2 v5] " Jan Beulich
2013-06-17 18:57 ` Suravee Suthikulanit [this message]
2013-06-10 10:05 ` [PATCH 1/2 V2] iommu/amd: Fix logic for clearing the IOMMU interrupt bits Jan Beulich
2013-06-10 10:56 ` [PATCH 1/2 v3] " Jan Beulich
2013-06-10 11:02 ` Jan Beulich
2013-06-10 12:18 ` Tim Deegan
2013-06-10 12:31 ` Jan Beulich
2013-06-10 13:58 ` Suravee Suthikulanit
2013-06-10 12:41 ` [PATCH 1/2 v4] " Jan Beulich
2013-06-10 12:46 ` Tim Deegan
2013-06-10 13:49 ` George Dunlap
2013-06-10 14:08 ` Jan Beulich
2013-06-11 6:47 ` [PATCH 1/2 v5] " Jan Beulich
2013-06-11 23:03 ` Suravee Suthikulanit
2013-06-12 6:24 ` Jan Beulich
2013-06-12 22:37 ` Suravee Suthikulpanit
2013-06-13 1:44 ` Suravee Suthikulpanit
2013-06-13 7:54 ` Jan Beulich
2013-06-13 13:48 ` Suravee Suthikulpanit
2013-06-13 14:20 ` George Dunlap
2013-06-13 14:30 ` Processed: " xen
2013-06-13 15:58 ` Jan Beulich
2013-06-13 16:34 ` Suravee Suthikulanit
2013-06-14 6:27 ` Jan Beulich
2013-06-14 6:40 ` Jan Beulich
2013-06-14 7:14 ` [PATCH] AMD IOMMU: make interrupt work again Jan Beulich
2013-06-14 16:10 ` Suravee Suthikulanit
2013-06-17 18:59 ` [PATCH 1/2 v5] iommu/amd: Fix logic for clearing the IOMMU interrupt bits Suravee Suthikulanit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51BF5C21.9090807@amd.com \
--to=suravee.suthikulpanit@amd.com \
--cc=JBeulich@suse.com \
--cc=tim@xen.org \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).