* Error Compiling Xen-unstable Changeset 26004
@ 2013-07-12 18:06 Singapore Citizen Mr. Teo En Ming (Zhang Enming)
2013-07-13 5:32 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
0 siblings, 1 reply; 6+ messages in thread
From: Singapore Citizen Mr. Teo En Ming (Zhang Enming) @ 2013-07-12 18:06 UTC (permalink / raw)
To: xen-devel@lists.xen.org, Ian Campbell, Konrad Rzeszutek Wilk,
Teo En Ming (Zhang Enming)
Dear Ian and Konrad,
I encountered an error when compiling Xen-unstable changeset 26004.
The error is reproduced as follows:
/usr/bin/ld: vl.o: undefined reference to symbol
'timer_settime@@GLIBC_2.3.3'
/usr/bin/ld: note: 'timer_settime@@GLIBC_2.3.3' is defined in DSO
/lib/x86_64-linux-gnu/librt.so.1 so try adding it to the linker command line
/lib/x86_64-linux-gnu/librt.so.1: could not read symbols: Invalid operation
collect2: error: ld returned 1 exit status
make[5]: *** [qemu-dm] Error 1
make[5]: Leaving directory
`/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough/tools/qemu-xen-traditional-dir-remote/i386-dm'
make[4]: *** [subdir-i386-dm] Error 2
make[4]: Leaving directory
`/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough/tools/qemu-xen-traditional-dir-remote'
make[3]: *** [subdir-install-qemu-xen-traditional-dir] Error 2
make[3]: Leaving directory
`/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough/tools'
make[2]: *** [subdirs-install] Error 2
make[2]: Leaving directory
`/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough/tools'
make[1]: *** [install-tools] Error 2
make[1]: Leaving directory
`/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough'
make: *** [world] Error 2
How do I solve this problem?
Thank you very much.
--
Yours sincerely,
Singapore Citizen Mr. Teo En Ming (Zhang Enming)
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error Compiling Xen-unstable Changeset 26004
2013-07-12 18:06 Error Compiling Xen-unstable Changeset 26004 Singapore Citizen Mr. Teo En Ming (Zhang Enming)
@ 2013-07-13 5:32 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
2013-07-13 9:45 ` Ian Campbell
0 siblings, 1 reply; 6+ messages in thread
From: Singapore Citizen Mr. Teo En Ming (Zhang Enming) @ 2013-07-13 5:32 UTC (permalink / raw)
To: singapore.mr.teo.en.ming; +Cc: Ian Campbell, xen-devel@lists.xen.org
On 13/07/2013 02:06, Singapore Citizen Mr. Teo En Ming (Zhang Enming) wrote:
> Dear Ian and Konrad,
>
> I encountered an error when compiling Xen-unstable changeset 26004.
>
> The error is reproduced as follows:
>
> /usr/bin/ld: vl.o: undefined reference to symbol
> 'timer_settime@@GLIBC_2.3.3'
> /usr/bin/ld: note: 'timer_settime@@GLIBC_2.3.3' is defined in DSO
> /lib/x86_64-linux-gnu/librt.so.1 so try adding it to the linker
> command line
> /lib/x86_64-linux-gnu/librt.so.1: could not read symbols: Invalid
> operation
> collect2: error: ld returned 1 exit status
> make[5]: *** [qemu-dm] Error 1
> make[5]: Leaving directory
> `/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough/tools/qemu-xen-traditional-dir-remote/i386-dm'
> make[4]: *** [subdir-i386-dm] Error 2
> make[4]: Leaving directory
> `/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough/tools/qemu-xen-traditional-dir-remote'
> make[3]: *** [subdir-install-qemu-xen-traditional-dir] Error 2
> make[3]: Leaving directory
> `/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough/tools'
> make[2]: *** [subdirs-install] Error 2
> make[2]: Leaving directory
> `/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough/tools'
> make[1]: *** [install-tools] Error 2
> make[1]: Leaving directory
> `/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough'
> make: *** [world] Error 2
>
> How do I solve this problem?
>
> Thank you very much.
>
Dear Ian and Konrad,
Please help me solve this problem.
Thank you very much.
--
Yours sincerely,
Singapore Citizen Mr. Teo En Ming (Zhang Enming)
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error Compiling Xen-unstable Changeset 26004
2013-07-13 5:32 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
@ 2013-07-13 9:45 ` Ian Campbell
2013-07-13 10:33 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
0 siblings, 1 reply; 6+ messages in thread
From: Ian Campbell @ 2013-07-13 9:45 UTC (permalink / raw)
To: singapore.mr.teo.en.ming; +Cc: xen-devel@lists.xen.org
On Sat, 2013-07-13 at 13:32 +0800, Singapore Citizen Mr. Teo En Ming
(Zhang Enming) wrote:
> On 13/07/2013 02:06, Singapore Citizen Mr. Teo En Ming (Zhang Enming) wrote:
Please wait more than half a day before sending ping messages. You
should give it at least one or two *working* days.
> > Dear Ian and Konrad,
> >
> > I encountered an error when compiling Xen-unstable changeset 26004.
This is very old, from about nine months ago. Please either run a stable
release or keep more up to date with xen unstable.
> > The error is reproduced as follows:
> >
> > /usr/bin/ld: vl.o: undefined reference to symbol
> > 'timer_settime@@GLIBC_2.3.3'
> > /usr/bin/ld: note: 'timer_settime@@GLIBC_2.3.3' is defined in DSO
> > /lib/x86_64-linux-gnu/librt.so.1 so try adding it to the linker
> > command line
> > /lib/x86_64-linux-gnu/librt.so.1: could not read symbols: Invalid
> > operation
> > collect2: error: ld returned 1 exit status
This was fixed by commit 70992304dc8c to the qemu-xen-traditional
tree.
Ian.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error Compiling Xen-unstable Changeset 26004
2013-07-13 9:45 ` Ian Campbell
@ 2013-07-13 10:33 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
2013-07-13 13:00 ` Pasi Kärkkäinen
0 siblings, 1 reply; 6+ messages in thread
From: Singapore Citizen Mr. Teo En Ming (Zhang Enming) @ 2013-07-13 10:33 UTC (permalink / raw)
To: Ian Campbell; +Cc: Teo En Ming (Zhang Enming), xen-devel@lists.xen.org
On 13/07/2013 17:45, Ian Campbell wrote:
> On Sat, 2013-07-13 at 13:32 +0800, Singapore Citizen Mr. Teo En Ming
> (Zhang Enming) wrote:
>> On 13/07/2013 02:06, Singapore Citizen Mr. Teo En Ming (Zhang Enming) wrote:
> Please wait more than half a day before sending ping messages. You
> should give it at least one or two *working* days.
>
>>> Dear Ian and Konrad,
>>>
>>> I encountered an error when compiling Xen-unstable changeset 26004.
> This is very old, from about nine months ago. Please either run a stable
> release or keep more up to date with xen unstable.
>
>>> The error is reproduced as follows:
>>>
>>> /usr/bin/ld: vl.o: undefined reference to symbol
>>> 'timer_settime@@GLIBC_2.3.3'
>>> /usr/bin/ld: note: 'timer_settime@@GLIBC_2.3.3' is defined in DSO
>>> /lib/x86_64-linux-gnu/librt.so.1 so try adding it to the linker
>>> command line
>>> /lib/x86_64-linux-gnu/librt.so.1: could not read symbols: Invalid
>>> operation
>>> collect2: error: ld returned 1 exit status
> This was fixed by commit 70992304dc8c to the qemu-xen-traditional
> tree.
>
> Ian.
>
>
Dear Ian,
If I still wanted to use changeset 26004 (for reasons of VGA
passthrough), how should I overcome the problem as stated above?
Thank you very much.
--
Yours sincerely,
Singapore Citizen Mr. Teo En Ming (Zhang Enming)
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error Compiling Xen-unstable Changeset 26004
2013-07-13 10:33 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
@ 2013-07-13 13:00 ` Pasi Kärkkäinen
2013-07-13 13:08 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
0 siblings, 1 reply; 6+ messages in thread
From: Pasi Kärkkäinen @ 2013-07-13 13:00 UTC (permalink / raw)
To: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
Cc: Ian Campbell, xen-devel@lists.xen.org
On Sat, Jul 13, 2013 at 06:33:04PM +0800, Singapore Citizen Mr. Teo En Ming (Zhang Enming) wrote:
> On 13/07/2013 17:45, Ian Campbell wrote:
> >On Sat, 2013-07-13 at 13:32 +0800, Singapore Citizen Mr. Teo En Ming
> >(Zhang Enming) wrote:
> >>On 13/07/2013 02:06, Singapore Citizen Mr. Teo En Ming (Zhang Enming) wrote:
> >Please wait more than half a day before sending ping messages. You
> >should give it at least one or two *working* days.
> >
> >>>Dear Ian and Konrad,
> >>>
> >>>I encountered an error when compiling Xen-unstable changeset 26004.
> >This is very old, from about nine months ago. Please either run a stable
> >release or keep more up to date with xen unstable.
> >
> >>>The error is reproduced as follows:
> >>>
> >>>/usr/bin/ld: vl.o: undefined reference to symbol
> >>>'timer_settime@@GLIBC_2.3.3'
> >>>/usr/bin/ld: note: 'timer_settime@@GLIBC_2.3.3' is defined in DSO
> >>>/lib/x86_64-linux-gnu/librt.so.1 so try adding it to the linker
> >>>command line
> >>>/lib/x86_64-linux-gnu/librt.so.1: could not read symbols: Invalid
> >>>operation
> >>>collect2: error: ld returned 1 exit status
> >This was fixed by commit 70992304dc8c to the qemu-xen-traditional
> >tree.
> >
> >Ian.
> >
> >
>
> Dear Ian,
>
> If I still wanted to use changeset 26004 (for reasons of VGA
> passthrough), how should I overcome the problem as stated above?
>
> Thank you very much.
>
You fix it by applying the patch from commit 70992304dc8c, as stated above.
-- Pasi
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error Compiling Xen-unstable Changeset 26004
2013-07-13 13:00 ` Pasi Kärkkäinen
@ 2013-07-13 13:08 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
0 siblings, 0 replies; 6+ messages in thread
From: Singapore Citizen Mr. Teo En Ming (Zhang Enming) @ 2013-07-13 13:08 UTC (permalink / raw)
To: Pasi Kärkkäinen; +Cc: Ian Campbell, xen-devel@lists.xen.org
On 13/07/2013 21:00, Pasi Kärkkäinen wrote:
> On Sat, Jul 13, 2013 at 06:33:04PM +0800, Singapore Citizen Mr. Teo En Ming (Zhang Enming) wrote:
>> On 13/07/2013 17:45, Ian Campbell wrote:
>>> On Sat, 2013-07-13 at 13:32 +0800, Singapore Citizen Mr. Teo En Ming
>>> (Zhang Enming) wrote:
>>>> On 13/07/2013 02:06, Singapore Citizen Mr. Teo En Ming (Zhang Enming) wrote:
>>> Please wait more than half a day before sending ping messages. You
>>> should give it at least one or two *working* days.
>>>
>>>>> Dear Ian and Konrad,
>>>>>
>>>>> I encountered an error when compiling Xen-unstable changeset 26004.
>>> This is very old, from about nine months ago. Please either run a stable
>>> release or keep more up to date with xen unstable.
>>>
>>>>> The error is reproduced as follows:
>>>>>
>>>>> /usr/bin/ld: vl.o: undefined reference to symbol
>>>>> 'timer_settime@@GLIBC_2.3.3'
>>>>> /usr/bin/ld: note: 'timer_settime@@GLIBC_2.3.3' is defined in DSO
>>>>> /lib/x86_64-linux-gnu/librt.so.1 so try adding it to the linker
>>>>> command line
>>>>> /lib/x86_64-linux-gnu/librt.so.1: could not read symbols: Invalid
>>>>> operation
>>>>> collect2: error: ld returned 1 exit status
>>> This was fixed by commit 70992304dc8c to the qemu-xen-traditional
>>> tree.
>>>
>>> Ian.
>>>
>>>
>> Dear Ian,
>>
>> If I still wanted to use changeset 26004 (for reasons of VGA
>> passthrough), how should I overcome the problem as stated above?
>>
>> Thank you very much.
>>
> You fix it by applying the patch from commit 70992304dc8c, as stated above.
>
> -- Pasi
>
>
Dear Pasi,
How do I do that? Could you list out the steps?
Thank you very much.
--
Yours sincerely,
Singapore Citizen Mr. Teo En Ming (Zhang Enming)
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-07-13 13:08 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-07-12 18:06 Error Compiling Xen-unstable Changeset 26004 Singapore Citizen Mr. Teo En Ming (Zhang Enming)
2013-07-13 5:32 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
2013-07-13 9:45 ` Ian Campbell
2013-07-13 10:33 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
2013-07-13 13:00 ` Pasi Kärkkäinen
2013-07-13 13:08 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).