xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] x86: don't blindly create L3 tables for the direct map
@ 2013-09-30 12:34 Jan Beulich
  2013-09-30 12:36 ` Andrew Cooper
  2013-09-30 12:58 ` Keir Fraser
  0 siblings, 2 replies; 3+ messages in thread
From: Jan Beulich @ 2013-09-30 12:34 UTC (permalink / raw)
  To: xen-devel; +Cc: Malcolm Crossley, Keir Fraser

[-- Attachment #1: Type: text/plain, Size: 3902 bytes --]

Now that the direct map area can extend all the way up to almost the
end of address space, this is wasteful.

Also fold two almost redundant messages in SRAT parsing into one.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Malcolm Crossley <malcolm.crossley@citrix.com>

--- a/xen/arch/x86/mm.c
+++ b/xen/arch/x86/mm.c
@@ -137,7 +137,7 @@ l1_pgentry_t __attribute__ ((__section__
 #define PTE_UPDATE_WITH_CMPXCHG
 #endif
 
-bool_t __read_mostly mem_hotplug = 0;
+paddr_t __read_mostly mem_hotplug;
 
 /* Private domain structs for DOMID_XEN and DOMID_IO. */
 struct domain *dom_xen, *dom_io, *dom_cow;
--- a/xen/arch/x86/srat.c
+++ b/xen/arch/x86/srat.c
@@ -113,6 +113,7 @@ static __init void bad_srat(void)
 		apicid_to_node[i] = NUMA_NO_NODE;
 	for (i = 0; i < ARRAY_SIZE(pxm2node); i++)
 		pxm2node[i] = NUMA_NO_NODE;
+	mem_hotplug = 0;
 }
 
 /*
@@ -257,13 +258,6 @@ acpi_numa_memory_affinity_init(struct ac
 		return;
 	}
 	/* It is fine to add this area to the nodes data it will be used later*/
-	if (ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE)
-	{
-		printk(KERN_INFO "SRAT: hot plug zone found %"PRIx64" - %"PRIx64" \n",
-				start, end);
-		mem_hotplug = 1;
-	}
-
 	i = conflicting_memblks(start, end);
 	if (i == node) {
 		printk(KERN_WARNING
@@ -287,8 +281,11 @@ acpi_numa_memory_affinity_init(struct ac
 		if (nd->end < end)
 			nd->end = end;
 	}
-	printk(KERN_INFO "SRAT: Node %u PXM %u %"PRIx64"-%"PRIx64"\n", node, pxm,
-	       start, end);
+	if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && end > mem_hotplug)
+		mem_hotplug = end;
+	printk(KERN_INFO "SRAT: Node %u PXM %u %"PRIx64"-%"PRIx64"%s\n",
+	       node, pxm, start, end,
+	       ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE ? " (hotplug)" : "");
 
 	node_memblk_range[num_node_memblks].start = start;
 	node_memblk_range[num_node_memblks].end = end;
--- a/xen/arch/x86/x86_64/mm.c
+++ b/xen/arch/x86/x86_64/mm.c
@@ -559,25 +559,20 @@ void __init paging_init(void)
      * We setup the L3s for 1:1 mapping if host support memory hotplug
      * to avoid sync the 1:1 mapping on page fault handler
      */
-    if ( mem_hotplug )
+    for ( va = DIRECTMAP_VIRT_START;
+          va < DIRECTMAP_VIRT_END && (void *)va < __va(mem_hotplug);
+          va += (1UL << L4_PAGETABLE_SHIFT) )
     {
-        unsigned long va;
-
-        for ( va = DIRECTMAP_VIRT_START;
-              va < DIRECTMAP_VIRT_END;
-              va += (1UL << L4_PAGETABLE_SHIFT) )
+        if ( !(l4e_get_flags(idle_pg_table[l4_table_offset(va)]) &
+              _PAGE_PRESENT) )
         {
-            if ( !(l4e_get_flags(idle_pg_table[l4_table_offset(va)]) &
-                  _PAGE_PRESENT) )
-            {
-                l3_pg = alloc_domheap_page(NULL, 0);
-                if ( !l3_pg )
-                    goto nomem;
-                l3_ro_mpt = page_to_virt(l3_pg);
-                clear_page(l3_ro_mpt);
-                l4e_write(&idle_pg_table[l4_table_offset(va)],
-                  l4e_from_page(l3_pg, __PAGE_HYPERVISOR));
-            }
+            l3_pg = alloc_domheap_page(NULL, 0);
+            if ( !l3_pg )
+                goto nomem;
+            l3_ro_mpt = page_to_virt(l3_pg);
+            clear_page(l3_ro_mpt);
+            l4e_write(&idle_pg_table[l4_table_offset(va)],
+                      l4e_from_page(l3_pg, __PAGE_HYPERVISOR));
         }
     }
 
--- a/xen/include/asm-x86/mm.h
+++ b/xen/include/asm-x86/mm.h
@@ -399,7 +399,7 @@ static inline int get_page_and_type(stru
 int check_descriptor(const struct domain *, struct desc_struct *d);
 
 extern bool_t opt_allow_superpage;
-extern bool_t mem_hotplug;
+extern paddr_t mem_hotplug;
 
 /******************************************************************************
  * With shadow pagetables, the different kinds of address start 




[-- Attachment #2: x86-mem-hotplug-boundary.patch --]
[-- Type: text/plain, Size: 3954 bytes --]

x86: don't blindly create L3 tables for the direct map

Now that the direct map area can extend all the way up to almost the
end of address space, this is wasteful.

Also fold two almost redundant messages in SRAT parsing into one.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Malcolm Crossley <malcolm.crossley@citrix.com>

--- a/xen/arch/x86/mm.c
+++ b/xen/arch/x86/mm.c
@@ -137,7 +137,7 @@ l1_pgentry_t __attribute__ ((__section__
 #define PTE_UPDATE_WITH_CMPXCHG
 #endif
 
-bool_t __read_mostly mem_hotplug = 0;
+paddr_t __read_mostly mem_hotplug;
 
 /* Private domain structs for DOMID_XEN and DOMID_IO. */
 struct domain *dom_xen, *dom_io, *dom_cow;
--- a/xen/arch/x86/srat.c
+++ b/xen/arch/x86/srat.c
@@ -113,6 +113,7 @@ static __init void bad_srat(void)
 		apicid_to_node[i] = NUMA_NO_NODE;
 	for (i = 0; i < ARRAY_SIZE(pxm2node); i++)
 		pxm2node[i] = NUMA_NO_NODE;
+	mem_hotplug = 0;
 }
 
 /*
@@ -257,13 +258,6 @@ acpi_numa_memory_affinity_init(struct ac
 		return;
 	}
 	/* It is fine to add this area to the nodes data it will be used later*/
-	if (ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE)
-	{
-		printk(KERN_INFO "SRAT: hot plug zone found %"PRIx64" - %"PRIx64" \n",
-				start, end);
-		mem_hotplug = 1;
-	}
-
 	i = conflicting_memblks(start, end);
 	if (i == node) {
 		printk(KERN_WARNING
@@ -287,8 +281,11 @@ acpi_numa_memory_affinity_init(struct ac
 		if (nd->end < end)
 			nd->end = end;
 	}
-	printk(KERN_INFO "SRAT: Node %u PXM %u %"PRIx64"-%"PRIx64"\n", node, pxm,
-	       start, end);
+	if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && end > mem_hotplug)
+		mem_hotplug = end;
+	printk(KERN_INFO "SRAT: Node %u PXM %u %"PRIx64"-%"PRIx64"%s\n",
+	       node, pxm, start, end,
+	       ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE ? " (hotplug)" : "");
 
 	node_memblk_range[num_node_memblks].start = start;
 	node_memblk_range[num_node_memblks].end = end;
--- a/xen/arch/x86/x86_64/mm.c
+++ b/xen/arch/x86/x86_64/mm.c
@@ -559,25 +559,20 @@ void __init paging_init(void)
      * We setup the L3s for 1:1 mapping if host support memory hotplug
      * to avoid sync the 1:1 mapping on page fault handler
      */
-    if ( mem_hotplug )
+    for ( va = DIRECTMAP_VIRT_START;
+          va < DIRECTMAP_VIRT_END && (void *)va < __va(mem_hotplug);
+          va += (1UL << L4_PAGETABLE_SHIFT) )
     {
-        unsigned long va;
-
-        for ( va = DIRECTMAP_VIRT_START;
-              va < DIRECTMAP_VIRT_END;
-              va += (1UL << L4_PAGETABLE_SHIFT) )
+        if ( !(l4e_get_flags(idle_pg_table[l4_table_offset(va)]) &
+              _PAGE_PRESENT) )
         {
-            if ( !(l4e_get_flags(idle_pg_table[l4_table_offset(va)]) &
-                  _PAGE_PRESENT) )
-            {
-                l3_pg = alloc_domheap_page(NULL, 0);
-                if ( !l3_pg )
-                    goto nomem;
-                l3_ro_mpt = page_to_virt(l3_pg);
-                clear_page(l3_ro_mpt);
-                l4e_write(&idle_pg_table[l4_table_offset(va)],
-                  l4e_from_page(l3_pg, __PAGE_HYPERVISOR));
-            }
+            l3_pg = alloc_domheap_page(NULL, 0);
+            if ( !l3_pg )
+                goto nomem;
+            l3_ro_mpt = page_to_virt(l3_pg);
+            clear_page(l3_ro_mpt);
+            l4e_write(&idle_pg_table[l4_table_offset(va)],
+                      l4e_from_page(l3_pg, __PAGE_HYPERVISOR));
         }
     }
 
--- a/xen/include/asm-x86/mm.h
+++ b/xen/include/asm-x86/mm.h
@@ -399,7 +399,7 @@ static inline int get_page_and_type(stru
 int check_descriptor(const struct domain *, struct desc_struct *d);
 
 extern bool_t opt_allow_superpage;
-extern bool_t mem_hotplug;
+extern paddr_t mem_hotplug;
 
 /******************************************************************************
  * With shadow pagetables, the different kinds of address start 

[-- Attachment #3: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-09-30 12:58 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-09-30 12:34 [PATCH] x86: don't blindly create L3 tables for the direct map Jan Beulich
2013-09-30 12:36 ` Andrew Cooper
2013-09-30 12:58 ` Keir Fraser

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).