From: Andrew Cooper <andrew.cooper3@citrix.com>
To: dongxiao.xu@intel.com
Cc: keir@xen.org, Ian.Campbell@citrix.com,
stefano.stabellini@eu.citrix.com, Ian.Jackson@eu.citrix.com,
xen-devel@lists.xen.org, JBeulich@suse.com,
dgdegra@tycho.nsa.gov
Subject: Re: [PATCH v3 1/7] x86: detect and initialize Cache QoS Monitoring feature
Date: Fri, 29 Nov 2013 13:59:15 +0000 [thread overview]
Message-ID: <52989DB3.4030100@citrix.com> (raw)
In-Reply-To: <1385704092-89546-2-git-send-email-dongxiao.xu@intel.com>
On 29/11/13 05:48, dongxiao.xu@intel.com wrote:
> From: Dongxiao Xu <dongxiao.xu@intel.com>
>
> Detect platform QoS feature status and enumerate the resource types,
> one of which is to monitor the L3 cache occupancy.
>
> Also introduce a Xen grub command line parameter to control the
> QoS feature status globally.
>
> Signed-off-by: Jiongxi Li <jiongxi.li@intel.com>
> Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
> ---
> xen/arch/x86/Makefile | 1 +
> xen/arch/x86/cpu/intel.c | 6 +++
> xen/arch/x86/pqos.c | 95 ++++++++++++++++++++++++++++++++++++++
> xen/arch/x86/setup.c | 3 ++
> xen/include/asm-x86/cpufeature.h | 1 +
> xen/include/asm-x86/pqos.h | 32 +++++++++++++
> 6 files changed, 138 insertions(+)
> create mode 100644 xen/arch/x86/pqos.c
> create mode 100644 xen/include/asm-x86/pqos.h
>
> diff --git a/xen/arch/x86/Makefile b/xen/arch/x86/Makefile
> index d502bdf..54962e0 100644
> --- a/xen/arch/x86/Makefile
> +++ b/xen/arch/x86/Makefile
> @@ -58,6 +58,7 @@ obj-y += crash.o
> obj-y += tboot.o
> obj-y += hpet.o
> obj-y += xstate.o
> +obj-y += pqos.o
>
> obj-$(crash_debug) += gdbstub.o
>
> diff --git a/xen/arch/x86/cpu/intel.c b/xen/arch/x86/cpu/intel.c
> index 27fe762..f0d83ea 100644
> --- a/xen/arch/x86/cpu/intel.c
> +++ b/xen/arch/x86/cpu/intel.c
> @@ -230,6 +230,12 @@ static void __devinit init_intel(struct cpuinfo_x86 *c)
> ( c->cpuid_level >= 0x00000006 ) &&
> ( cpuid_eax(0x00000006) & (1u<<2) ) )
> set_bit(X86_FEATURE_ARAT, c->x86_capability);
> +
> + /* Check platform QoS monitoring capability */
> + if ((c->cpuid_level >= 0x00000007) &&
> + (cpuid_ebx(0x00000007) & (1u<<12)))
> + set_bit(X86_FEATURE_QOSM, c->x86_capability);
> +
> }
>
> static struct cpu_dev intel_cpu_dev __cpuinitdata = {
> diff --git a/xen/arch/x86/pqos.c b/xen/arch/x86/pqos.c
> new file mode 100644
> index 0000000..e2172c4
> --- /dev/null
> +++ b/xen/arch/x86/pqos.c
> @@ -0,0 +1,95 @@
> +/*
> + * pqos.c: Platform QoS related service for guest.
> + *
> + * Copyright (c) 2013, Intel Corporation
> + * Author: Jiongxi Li <jiongxi.li@intel.com>
> + * Author: Dongxiao Xu <dongxiao.xu@intel.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
> + * Place - Suite 330, Boston, MA 02111-1307 USA.
> + */
> +#include <asm/processor.h>
> +#include <xen/init.h>
> +#include <asm/pqos.h>
> +
> +static bool_t __initdata pqos_enabled = 1;
> +boolean_param("pqos", pqos_enabled);
> +
> +static unsigned int cqm_rmid_count = 256;
> +integer_param("cqm_rmid_count", cqm_rmid_count);
> +
> +unsigned int cqm_upscaling_factor = 0;
> +bool_t cqm_enabled = 0;
> +domid_t *cqm_rmid_array = NULL;
I feel this would be more meaningful being called "rmid_to_dom" or
something similar. (but do admit that this is entirely personal taste).
~Andrew
> +
> +static void __init init_cqm(void)
> +{
> + unsigned int rmid;
> + unsigned int eax, edx;
> + unsigned int max_cqm_rmid;
> +
> + cpuid_count(0xf, 1, &eax, &cqm_upscaling_factor, &max_cqm_rmid, &edx);
> + if ( !(edx & QOS_MONITOR_EVTID_L3) )
> + return;
> +
> + cqm_rmid_count = min(cqm_rmid_count, max_cqm_rmid + 1);
> +
> + cqm_rmid_array = xzalloc_array(domid_t, cqm_rmid_count);
> + if ( !cqm_rmid_array )
> + {
> + cqm_rmid_count = 0;
> + return;
> + }
> +
> + /* Reserve RMID 0 for all domains not being monitored */
> + cqm_rmid_array[0] = DOMID_XEN;
> +
> + for ( rmid = 1; rmid < cqm_rmid_count; rmid++ )
> + cqm_rmid_array[rmid] = DOMID_INVALID;
> +
> + cqm_enabled = 1;
> +
> + printk(XENLOG_INFO "Cache QoS Monitoring Enabled.\n");
> +}
> +
> +static void __init init_qos_monitor(void)
> +{
> + unsigned int qm_features;
> + unsigned int eax, ebx, ecx;
> +
> + if ( !(boot_cpu_has(X86_FEATURE_QOSM)) )
> + return;
> +
> + cpuid_count(0xf, 0, &eax, &ebx, &ecx, &qm_features);
> +
> + if ( qm_features & QOS_MONITOR_TYPE_L3 )
> + init_cqm();
> +}
> +
> +void __init init_platform_qos(void)
> +{
> + if ( !pqos_enabled )
> + return;
> +
> + init_qos_monitor();
> +}
> +
> +/*
> + * Local variables:
> + * mode: C
> + * c-file-style: "BSD"
> + * c-basic-offset: 4
> + * tab-width: 4
> + * indent-tabs-mode: nil
> + * End:
> + */
> diff --git a/xen/arch/x86/setup.c b/xen/arch/x86/setup.c
> index 5bf4ee0..95418e4 100644
> --- a/xen/arch/x86/setup.c
> +++ b/xen/arch/x86/setup.c
> @@ -48,6 +48,7 @@
> #include <asm/setup.h>
> #include <xen/cpu.h>
> #include <asm/nmi.h>
> +#include <asm/pqos.h>
>
> /* opt_nosmp: If true, secondary processors are ignored. */
> static bool_t __initdata opt_nosmp;
> @@ -1402,6 +1403,8 @@ void __init __start_xen(unsigned long mbi_p)
>
> domain_unpause_by_systemcontroller(dom0);
>
> + init_platform_qos();
> +
> reset_stack_and_jump(init_done);
> }
>
> diff --git a/xen/include/asm-x86/cpufeature.h b/xen/include/asm-x86/cpufeature.h
> index 1cfaf94..ca59668 100644
> --- a/xen/include/asm-x86/cpufeature.h
> +++ b/xen/include/asm-x86/cpufeature.h
> @@ -147,6 +147,7 @@
> #define X86_FEATURE_ERMS (7*32+ 9) /* Enhanced REP MOVSB/STOSB */
> #define X86_FEATURE_INVPCID (7*32+10) /* Invalidate Process Context ID */
> #define X86_FEATURE_RTM (7*32+11) /* Restricted Transactional Memory */
> +#define X86_FEATURE_QOSM (7*32+12) /* Platform QoS monitoring capability */
> #define X86_FEATURE_NO_FPU_SEL (7*32+13) /* FPU CS/DS stored as zero */
> #define X86_FEATURE_SMAP (7*32+20) /* Supervisor Mode Access Prevention */
>
> diff --git a/xen/include/asm-x86/pqos.h b/xen/include/asm-x86/pqos.h
> new file mode 100644
> index 0000000..e8caca2
> --- /dev/null
> +++ b/xen/include/asm-x86/pqos.h
> @@ -0,0 +1,32 @@
> +/*
> + * pqos.h: Platform QoS related service for guest.
> + *
> + * Copyright (c) 2013, Intel Corporation
> + * Author: Jiongxi Li <jiongxi.li@intel.com>
> + * Author: Dongxiao Xu <dongxiao.xu@intel.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
> + * Place - Suite 330, Boston, MA 02111-1307 USA.
> + */
> +#ifndef ASM_PQOS_H
> +#define ASM_PQOS_H
> +
> +/* QoS Resource Type Enumeration */
> +#define QOS_MONITOR_TYPE_L3 0x2
> +
> +/* QoS Monitoring Event ID */
> +#define QOS_MONITOR_EVTID_L3 0x1
> +
> +void init_platform_qos(void);
> +
> +#endif
next prev parent reply other threads:[~2013-11-29 13:59 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-29 5:48 [PATCH v3 0/7] enable Cache QoS Monitoring (CQM) feature dongxiao.xu
2013-11-29 5:48 ` [PATCH v3 1/7] x86: detect and initialize Cache QoS Monitoring feature dongxiao.xu
2013-11-29 13:54 ` Andrew Cooper
2013-11-29 15:05 ` Jan Beulich
2013-11-30 0:41 ` Xu, Dongxiao
2013-12-02 2:17 ` Xu, Dongxiao
2013-12-02 9:22 ` Xu, Dongxiao
2013-11-29 13:59 ` Andrew Cooper [this message]
2013-11-30 0:42 ` Xu, Dongxiao
2013-11-29 5:48 ` [PATCH v3 2/7] x86: handle CQM resource when creating/destroying guests dongxiao.xu
2013-11-29 14:18 ` Andrew Cooper
2013-11-29 15:01 ` Andrew Cooper
2013-11-29 15:07 ` Jan Beulich
2013-11-29 5:48 ` [PATCH v3 3/7] x86: dynamically attach/detach CQM service for a guest dongxiao.xu
2013-11-29 14:22 ` Andrew Cooper
2013-11-29 5:48 ` [PATCH v3 4/7] x86: collect CQM information from all sockets dongxiao.xu
2013-11-29 14:53 ` Andrew Cooper
2013-11-30 1:27 ` Xu, Dongxiao
2013-11-29 5:48 ` [PATCH v3 5/7] x86: enable CQM monitoring for each domain RMID dongxiao.xu
2013-11-29 14:56 ` Andrew Cooper
2013-11-30 1:27 ` Xu, Dongxiao
2013-11-29 5:48 ` [PATCH v3 6/7] xsm: add platform QoS related xsm policies dongxiao.xu
2013-11-29 15:50 ` Daniel De Graaf
2013-11-29 5:48 ` [PATCH v3 7/7] tools: enable Cache QoS Monitoring feature for libxl/libxc dongxiao.xu
2013-11-29 15:29 ` [PATCH v3 0/7] enable Cache QoS Monitoring (CQM) feature Ian Campbell
2013-11-29 15:36 ` Jan Beulich
2013-11-29 15:41 ` Ian Campbell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52989DB3.4030100@citrix.com \
--to=andrew.cooper3@citrix.com \
--cc=Ian.Campbell@citrix.com \
--cc=Ian.Jackson@eu.citrix.com \
--cc=JBeulich@suse.com \
--cc=dgdegra@tycho.nsa.gov \
--cc=dongxiao.xu@intel.com \
--cc=keir@xen.org \
--cc=stefano.stabellini@eu.citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).