xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Cooper <andrew.cooper3@citrix.com>
To: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>,
	Ian Jackson <Ian.Jackson@eu.citrix.com>,
	Ian Campbell <Ian.Campbell@citrix.com>,
	Xen-devel <xen-devel@lists.xen.org>
Subject: Re: [Patch 2/2] tools/libxc: Prevent erroneous success from xc_domain_restore
Date: Tue, 4 Feb 2014 17:16:59 +0000	[thread overview]
Message-ID: <52F1208B.6040809@citrix.com> (raw)
In-Reply-To: <1390839925-28088-3-git-send-email-andrew.cooper3@citrix.com>

On 27/01/14 16:25, Andrew Cooper wrote:
> The variable 'rc' is set to 1 at the top of xc_domain_restore, and for the
> most part is left alone until success, at which point it is set to 0.
>
> There is a separate 'frc' which for the most part is used to check function
> calls, keeping errors separate from 'rc'.
>
> For a toolstack which sets callbacks->toolstack_restore(), and the function
> returns 0, any subsequent error will end up with code flow going to "out;",
> resulting in the migration being declared a success.
>
> For consistency, update the callsites of xc_dom_gnttab{,_hvm}_seed() to use
> 'frc', even though their use of 'rc' is currently safe.
>
> Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
> CC: Ian Campbell <Ian.Campbell@citrix.com>
> CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
> CC: George Dunlap <george.dunlap@eu.citrix.com>

Ping?

>
> ---
>
> Regarding 4.4: If the two "for consistency" changes to
> xc_dom_gnttab{,_hvm}_seed() are considered too risky, they can be dropped
> without affecting the bugfix nature of the patch, but I would argue that
> leaving some examples of "rc = function_call()" leaves a bad precident which
> is likely to lead to similar bugs in the future.
> ---
>  tools/libxc/xc_domain_restore.c |   19 +++++++++----------
>  1 file changed, 9 insertions(+), 10 deletions(-)
>
> diff --git a/tools/libxc/xc_domain_restore.c b/tools/libxc/xc_domain_restore.c
> index 5ba47d7..817054d 100644
> --- a/tools/libxc/xc_domain_restore.c
> +++ b/tools/libxc/xc_domain_restore.c
> @@ -2240,9 +2240,9 @@ int xc_domain_restore(xc_interface *xch, int io_fd, uint32_t dom,
>          memcpy(ctx->live_p2m, ctx->p2m, dinfo->p2m_size * sizeof(xen_pfn_t));
>      munmap(ctx->live_p2m, P2M_FL_ENTRIES * PAGE_SIZE);
>  
> -    rc = xc_dom_gnttab_seed(xch, dom, *console_mfn, *store_mfn,
> -                            console_domid, store_domid);
> -    if (rc != 0)
> +    frc = xc_dom_gnttab_seed(xch, dom, *console_mfn, *store_mfn,
> +                             console_domid, store_domid);
> +    if (frc != 0)
>      {
>          ERROR("error seeding grant table");
>          goto out;
> @@ -2257,16 +2257,15 @@ int xc_domain_restore(xc_interface *xch, int io_fd, uint32_t dom,
>      {
>          if ( callbacks != NULL && callbacks->toolstack_restore != NULL )
>          {
> -            rc = callbacks->toolstack_restore(dom, tdata.data, tdata.len,
> -                        callbacks->data);
> +            frc = callbacks->toolstack_restore(dom, tdata.data, tdata.len,
> +                                               callbacks->data);
>              free(tdata.data);
> -            if ( rc < 0 )
> +            if ( frc < 0 )
>              {
>                  PERROR("error calling toolstack_restore");
>                  goto out;
>              }
>          } else {
> -            rc = -1;
>              ERROR("toolstack data available but no callback provided\n");
>              free(tdata.data);
>              goto out;
> @@ -2326,9 +2325,9 @@ int xc_domain_restore(xc_interface *xch, int io_fd, uint32_t dom,
>          goto out;
>      }
>  
> -    rc = xc_dom_gnttab_hvm_seed(xch, dom, *console_mfn, *store_mfn,
> -                                console_domid, store_domid);
> -    if (rc != 0)
> +    frc = xc_dom_gnttab_hvm_seed(xch, dom, *console_mfn, *store_mfn,
> +                                 console_domid, store_domid);
> +    if (frc != 0)
>      {
>          ERROR("error seeding grant table");
>          goto out;

  reply	other threads:[~2014-02-04 17:16 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-27 16:25 [Xen-devel Patch 0/2] Prevent xc_domain_restore() returning success despite errors Andrew Cooper
2014-01-27 16:25 ` [Patch 1/2] tools/libxc: goto correct label on error paths Andrew Cooper
2014-01-28 11:41   ` George Dunlap
2014-02-04 15:55     ` Ian Campbell
2014-01-27 16:25 ` [Patch 2/2] tools/libxc: Prevent erroneous success from xc_domain_restore Andrew Cooper
2014-02-04 17:16   ` Andrew Cooper [this message]
2014-02-04 17:22     ` Ian Campbell
2014-02-04 17:26       ` Andrew Cooper
2014-02-04 17:43         ` Ian Campbell
2014-02-04 18:01           ` [PATCH v2] " Andrew Cooper
2014-02-05  9:21             ` Ian Campbell
2014-02-05 14:55             ` George Dunlap
2014-02-06 12:37               ` Ian Campbell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52F1208B.6040809@citrix.com \
    --to=andrew.cooper3@citrix.com \
    --cc=Ian.Campbell@citrix.com \
    --cc=Ian.Jackson@eu.citrix.com \
    --cc=george.dunlap@eu.citrix.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).