From: Don Slutz <dslutz@verizon.com>
To: Andrew Cooper <andrew.cooper3@citrix.com>,
Xen-devel <xen-devel@lists.xen.org>
Cc: Tim Deegan <tim@xen.org>, Jan Beulich <JBeulich@suse.com>,
Keir Fraser <keir@xen.org>,
Ian Campbell <ian.campbell@citrix.com>,
Stefano Stabellini <stefano.stabellini@citrix.com>
Subject: Re: [PATCH v3 5/5] xen/console: Traditional console timestamps including milliseconds
Date: Thu, 06 Mar 2014 18:54:24 -0500 [thread overview]
Message-ID: <53190AB0.4020806@terremark.com> (raw)
In-Reply-To: <1394134085-22952-6-git-send-email-andrew.cooper3@citrix.com>
On 03/06/14 14:28, Andrew Cooper wrote:
> Suggested-by: Don Slutz <dslutz@verizon.com>
> Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
> CC: Keir Fraser <keir@xen.org>
> CC: Jan Beulich <JBeulich@suse.com>
> CC: Ian Campbell <ian.campbell@citrix.com>
> CC: Stefano Stabellini <stefano.stabellini@citrix.com>
> CC: Tim Deegan <tim@xen.org>
>
> ---
>
> The change in arm is only for the sake of compilation - the function is a
> no-op.
> ---
> docs/misc/xen-command-line.markdown | 4 +++-
> xen/arch/arm/time.c | 2 +-
> xen/arch/x86/time.c | 10 +++++++---
> xen/drivers/char/console.c | 11 ++++++++++-
> xen/include/xen/time.h | 2 +-
> 5 files changed, 22 insertions(+), 7 deletions(-)
>
> diff --git a/docs/misc/xen-command-line.markdown b/docs/misc/xen-command-line.markdown
> index 98c9e5e..89dc484 100644
> --- a/docs/misc/xen-command-line.markdown
> +++ b/docs/misc/xen-command-line.markdown
> @@ -275,7 +275,7 @@ cleared. This allows a single port to be shared by two subsystems
> makes sense on its own.
>
> ### console\_timestamps
> -> `= none | date | boot`
> +> `= none | date | datems | boot`
>
> > Default: `boot`
>
> @@ -284,6 +284,8 @@ Specify which timestamp format Xen should use for each console line.
> * `none`: No timestamps
> * `date`: Date and time information
> * `[YYYY-MM-DD HH:MM:SS]`
> +* `datems`: Date and time, with milliseconds
> + * `[YYYY-MM-DD HH:MM:SS.mmm]`
> * `boot`: Seconds and microseconds since boot
> * `[SSSSSS.uuuuuu]`
>
> diff --git a/xen/arch/arm/time.c b/xen/arch/arm/time.c
> index 81e3e28..22e94bb 100644
> --- a/xen/arch/arm/time.c
> +++ b/xen/arch/arm/time.c
> @@ -282,7 +282,7 @@ void domain_set_time_offset(struct domain *d, int32_t time_offset_seconds)
> /* XXX update guest visible wallclock time */
> }
>
> -struct tm wallclock_time(void)
> +struct tm wallclock_time(uint64_t *ns)
> {
Adding:
if ( ns )
*ns = 0;
Makes sense here.
> return (struct tm) { 0 };
> }
> diff --git a/xen/arch/x86/time.c b/xen/arch/x86/time.c
> index 4f4de22..1156ccc 100644
> --- a/xen/arch/x86/time.c
> +++ b/xen/arch/x86/time.c
> @@ -1646,15 +1646,19 @@ int dom0_pit_access(struct ioreq *ioreq)
> return 0;
> }
>
> -struct tm wallclock_time(void)
> +struct tm wallclock_time(uint64_t *ns)
> {
> - uint64_t seconds;
> + uint64_t seconds, nsec;
>
> if ( !wc_sec )
And here.
> return (struct tm) { 0 };
>
> seconds = NOW() + SECONDS(wc_sec) + wc_nsec;
> - do_div(seconds, 1000000000);
> + nsec = do_div(seconds, 1000000000);
> +
> + if ( *ns )
This should be just
if ( ns )
-Don Slutz
> + *ns = nsec;
> +
> return gmtime(seconds);
> }
>
> diff --git a/xen/drivers/char/console.c b/xen/drivers/char/console.c
> index 60461b9..837e8a8 100644
> --- a/xen/drivers/char/console.c
> +++ b/xen/drivers/char/console.c
> @@ -53,6 +53,7 @@ enum con_timestamp_mode
> {
> TSM_NONE, /* No timestamps */
> TSM_DATE, /* [YYYY-MM-DD HH:MM:SS] */
> + TSM_DATE_MS, /* [YYYY-MM-DD HH:MM:SS.mmm] */
> TSM_BOOT /* [SSSSSS.uuuuuu] */
> };
>
> @@ -560,6 +561,8 @@ static void __init parse_console_timestamps(char *s)
> if ( *s == '\0' || /* Compat for old booleanparam() */
> !strcmp(s, "date") )
> opt_con_timestamp_mode = TSM_DATE;
> + else if ( !strcmp(s, "datems") )
> + opt_con_timestamp_mode = TSM_DATE_MS;
> else if ( !strcmp(s, "boot") )
> opt_con_timestamp_mode = TSM_BOOT;
> else if ( !strcmp(s, "none") )
> @@ -579,7 +582,8 @@ static void printk_start_of_line(const char *prefix)
> switch ( opt_con_timestamp_mode )
> {
> case TSM_DATE:
> - tm = wallclock_time();
> + case TSM_DATE_MS:
> + tm = wallclock_time(&nsec);
>
> if ( tm.tm_mday == 0 )
> return;
> @@ -588,6 +592,11 @@ static void printk_start_of_line(const char *prefix)
> snprintf(tstr, sizeof(tstr), "[%04u-%02u-%02u %02u:%02u:%02u] ",
> 1900 + tm.tm_year, tm.tm_mon + 1, tm.tm_mday,
> tm.tm_hour, tm.tm_min, tm.tm_sec);
> + else
> + snprintf(tstr, sizeof(tstr),
> + "[%04u-%02u-%02u %02u:%02u:%02u.%03"PRIu64"] ",
> + 1900 + tm.tm_year, tm.tm_mon + 1, tm.tm_mday,
> + tm.tm_hour, tm.tm_min, tm.tm_sec, nsec / 1000000);
> break;
>
> case TSM_BOOT:
> diff --git a/xen/include/xen/time.h b/xen/include/xen/time.h
> index 3eb5b63..2703454 100644
> --- a/xen/include/xen/time.h
> +++ b/xen/include/xen/time.h
> @@ -48,7 +48,7 @@ struct tm {
> int tm_isdst; /* daylight saving time */
> };
> struct tm gmtime(unsigned long t);
> -struct tm wallclock_time(void);
> +struct tm wallclock_time(uint64_t *ns);
>
> #define SYSTEM_TIME_HZ 1000000000ULL
> #define NOW() ((s_time_t)get_s_time())
next prev parent reply other threads:[~2014-03-06 23:54 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-06 19:28 [PATCH v3 0/5] Improvements to console timestamps Andrew Cooper
2014-03-06 19:28 ` [PATCH v3 1/5] xen/time: Move wallclock_time() declaration into common code Andrew Cooper
2014-03-06 19:28 ` [PATCH v3 2/5] x86/time: Always count s_time from Xen boot Andrew Cooper
2014-03-06 19:28 ` [PATCH v3 3/5] x86/time: Initialise time earlier during start_secondary() Andrew Cooper
2014-03-06 19:28 ` [PATCH v3 4/5] xen/console: Provide timestamps as an offset since boot Andrew Cooper
2014-03-07 9:47 ` Jan Beulich
2014-03-07 10:27 ` Andrew Cooper
2014-03-06 19:28 ` [PATCH v3 5/5] xen/console: Traditional console timestamps including milliseconds Andrew Cooper
2014-03-06 23:54 ` Don Slutz [this message]
2014-03-07 0:41 ` Andrew Cooper
2014-03-07 23:33 ` Don Slutz
2014-03-11 10:43 ` Ian Campbell
2014-03-11 11:32 ` Andrew Cooper
2014-03-11 11:39 ` Tim Deegan
2014-03-11 12:47 ` Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53190AB0.4020806@terremark.com \
--to=dslutz@verizon.com \
--cc=JBeulich@suse.com \
--cc=andrew.cooper3@citrix.com \
--cc=ian.campbell@citrix.com \
--cc=keir@xen.org \
--cc=stefano.stabellini@citrix.com \
--cc=tim@xen.org \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).