* HVM crash system on AMD APU A8-6600K
@ 2014-02-03 13:47 Vitaliy Tomin
2014-02-03 13:51 ` Andrew Cooper
0 siblings, 1 reply; 46+ messages in thread
From: Vitaliy Tomin @ 2014-02-03 13:47 UTC (permalink / raw)
To: xen-devel; +Cc: jbeulich, xiantao.zhang, suravee.suthikulpanit
[-- Attachment #1: Type: text/plain, Size: 845 bytes --]
My system based on AMD APU completely crashes when trying to use HVM
domUs. I've asked earlier on user list
http://lists.xen.org/archives/html/xen-users/2013-11/msg00063.html but
they were recommended to ask here.
I've also found same problem describer with another AMD APU here
http://lists.xen.org/archives/html/xen-devel/2013-08/msg01395.html
My system crashes every time I start HVM domU. But if I use xen
compiled with debug info it works stable at least for hours (not
tested for longer run).
My system is openSUSE 13.1 with Xen 4.4
My hardware is
ASRock FM2A75 Pro4
AMD A8-6600K APU
Gigabyte Radeon 7850
8 Gb DDR3 1600Mhz
I've tested with fresh xen 4.4 and it crash my system as well as stable xen 4.3.
I've setup with pci serial console and capture xen log ( === === lines
added by myself). Xen and dom0 dmesg logs also attached.
[-- Attachment #2: xen-serial-new.log --]
[-- Type: text/plain, Size: 18255 bytes --]
Xen 4.4.0_02-297.1
(XEN) Xen version 4.4.0_02-297.1 (abuild@) (gcc (SUSE Linux) 4.8.1 20130909 [gcc-4_8-branch revision 202388]) debug=n Tue Jan 28 16:08:48 UTC 2014
(XEN) Latest ChangeSet:
(XEN) Bootloader: GRUB2 2.00
(XEN) Command line: loglvl=all iommu=debug,verbose apic_verbosity=debug console=com1 com1=115200,8n1,pci
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 3 MBR signatures
(XEN) Found 4 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009e800 (usable)
(XEN) 000000000009e800 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000008d68b000 (usable)
(XEN) 000000008d68b000 - 000000008dd0a000 (reserved)
(XEN) 000000008dd0a000 - 000000008e05a000 (ACPI NVS)
(XEN) 000000008e05a000 - 000000008ea45000 (reserved)
(XEN) 000000008ea45000 - 000000008ea46000 (usable)
(XEN) 000000008ea46000 - 000000008ec4c000 (ACPI NVS)
(XEN) 000000008ec4c000 - 000000008f064000 (usable)
(XEN) 000000008f064000 - 000000008f7f3000 (reserved)
(XEN) 000000008f7f3000 - 000000008f800000 (usable)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fec10000 - 00000000fec11000 (reserved)
(XEN) 00000000fed00000 - 00000000fed01000 (reserved)
(XEN) 00000000fed80000 - 00000000fed90000 (reserved)
(XEN) 00000000ff800000 - 0000000100000000 (reserved)
(XEN) 0000000100001000 - 0000000250000000 (usable)
(XEN) ACPI: RSDP 000F0490, 0024 (r2 ALASKA)
(XEN) ACPI: XSDT 8E04A078, 0074 (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FACP 8E050128, 00F4 (r4 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI Warning (tbfadt-0464): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126]
(XEN) ACPI: DSDT 8E04A188, 5F9E (r2 ALASKA A M I 0 INTL 20051117)
(XEN) ACPI: FACS 8E052E80, 0040
(XEN) ACPI: APIC 8E050220, 0072 (r3 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FPDT 8E050298, 0044 (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: MCFG 8E0502E0, 003C (r1 ALASKA A M I 1072009 MSFT 10013)
(XEN) ACPI: AAFT 8E050320, 00E7 (r1 ALASKA OEMAAFT 1072009 MSFT 97)
(XEN) ACPI: HPET 8E050408, 0038 (r1 ALASKA A M I 1072009 AMI 5)
(XEN) ACPI: IVRS 8E050440, 0070 (r2 AMD ANNAPURN 1 AMD 0)
(XEN) ACPI: SSDT 8E0504B0, 0A60 (r1 AMD ANNAPURN 1 AMD 1)
(XEN) ACPI: SSDT 8E050F10, 04B7 (r2 AMD ANNAPURN 1 MSFT 4000000)
(XEN) ACPI: CRAT 8E0513C8, 02F8 (r1 AMD ANNAPURN 1 AMD 1)
(XEN) System RAM: 7642MB (7825720kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000250000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fd900
(XEN) DMI 2.7 present.
(XEN) APIC boot state is 'xapic'
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: 32/64X FACS address mismatch in FADT - 8e052e80/0000000000000000, using 32
(XEN) ACPI: wakeup_vec[8e052e8c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
(XEN) Processor #16 5:3 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
(XEN) Processor #17 5:3 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
(XEN) Processor #18 5:3 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
(XEN) Processor #19 5:3 APIC version 16
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x10228210 base: 0xfed00000
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs)
(XEN) NR_CPUS:512 nr_cpumask_bits:64
(XEN) mapped APIC to ffff82cfffbfb000 (fee00000)
(XEN) mapped IOAPIC to ffff82cfffbfa000 (fec00000)
(XEN) IRQ limits: 24 GSI, 760 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3893.022 MHz processor.
(XEN) Initing memory sharing.
(XEN) xstate_init: using cntxt_size: 0x3c0 and states: 0x4000000000000007
(XEN) AMD Fam15h machine check reporting enabled
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - ff
(XEN) PCI: Not using MCFG for segment 0000 bus 00-ff
(XEN) AMD-Vi: Found MSI capability block at 0x54
(XEN) AMD-Vi: ACPI Table:
(XEN) AMD-Vi: Signature IVRS
(XEN) AMD-Vi: Length 0x70
(XEN) AMD-Vi: Revision 0x2
(XEN) AMD-Vi: CheckSum 0xe8
(XEN) AMD-Vi: OEM_Id AMD
(XEN) AMD-Vi: OEM_Table_Id ANNAPURN
(XEN) AMD-Vi: OEM_Revision 0x1
(XEN) AMD-Vi: Creator_Id AMD
(XEN) AMD-Vi: Creator_Revision 0
(XEN) AMD-Vi: IVRS Block: type 0x10 flags 0xfe len 0x40 id 0x2
(XEN) AMD-Vi: IVHD Device Entry: type 0x3 id 0x8 flags 0
(XEN) AMD-Vi: Dev_Id Range: 0x8 -> 0xfffe
(XEN) AMD-Vi: IVHD Device Entry: type 0x43 id 0x200 flags 0
(XEN) AMD-Vi: Dev_Id Range: 0x200 -> 0x2ff alias 0xa4
(XEN) AMD-Vi: IVHD Device Entry: type 0 id 0 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x48 id 0 flags 0
(XEN) AMD-Vi: IVHD Special: 0000:00:14.0 variety 0x2 handle 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x48 id 0 flags 0xd7
(XEN) AMD-Vi: IVHD Special: 0000:00:14.0 variety 0x1 handle 0x5
(XEN) AMD-Vi: IOMMU Extended Features:
(XEN) - Prefetch Pages Command
(XEN) - Peripheral Page Service Request
(XEN) - Guest Translation
(XEN) - Invalidate All Command
(XEN) AMD-Vi: PPR Log Enabled.
(XEN) AMD-Vi: Guest Translation Enabled.
(XEN) AMD-Vi: IOMMU 0 Enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) Getting VERSION: 80050010
(XEN) Getting VERSION: 80050010
(XEN) Getting ID: 10000000
(XEN) Getting LVT0: 700
(XEN) Getting LVT1: 400
(XEN) enabled ExtINT on CPU#0
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 5-0, 5-16, 5-17, 5-18, 5-19, 5-20, 5-21, 5-22, 5-23 not connected.
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) number of MP IRQ sources: 15.
(XEN) number of IO-APIC #5 registers: 24.
(XEN) testing the IO APIC.......................
(XEN) IO APIC #5......
(XEN) .... register #00: 05000000
(XEN) ....... : physical APIC id: 05
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178021
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0021
(XEN) .... register #02: 05000000
(XEN) ....... : arbitration: 05
(XEN) .... register #03: 05018021
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 1 30
(XEN) 01 001 01 0 0 0 0 0 1 1 30
(XEN) 02 001 01 0 0 0 0 0 1 1 F0
(XEN) 03 001 01 0 0 0 0 0 1 1 38
(XEN) 04 001 01 0 0 0 0 0 1 1 40
(XEN) 05 001 01 0 0 0 0 0 1 1 48
(XEN) 06 001 01 0 0 0 0 0 1 1 50
(XEN) 07 001 01 0 0 0 0 0 1 1 58
(XEN) 08 001 01 0 0 0 0 0 1 1 60
(XEN) 09 001 01 1 1 0 1 0 1 0 00
(XEN) 0a 001 01 0 0 0 0 0 1 1 F1
(XEN) 0b 001 01 0 0 0 0 0 1 1 70
(XEN) 0c 001 01 0 0 0 0 0 1 1 78
(XEN) 0d 001 01 0 0 0 0 0 1 1 88
(XEN) 0e 001 01 0 0 0 0 0 1 1 90
(XEN) 0f 001 01 0 0 0 0 0 1 1 98
(XEN) 10 000 00 1 0 0 0 0 0 1 30
(XEN) 11 000 00 1 0 0 0 0 0 1 30
(XEN) 12 000 00 1 0 0 0 0 0 1 30
(XEN) 13 000 00 1 0 0 0 0 0 1 30
(XEN) 14 000 00 1 0 0 0 0 0 1 30
(XEN) 15 000 00 1 0 0 0 0 0 1 30
(XEN) 16 000 00 1 0 0 0 0 0 1 30
(XEN) 17 000 00 1 0 0 0 0 0 1 30
(XEN) Using vector-based indexing
(XEN) IRQ to pin mappings:
(XEN) IRQ240 -> 0:2
(XEN) IRQ48 -> 0:1
(XEN) IRQ56 -> 0:3
(XEN) IRQ64 -> 0:4
(XEN) IRQ72 -> 0:5
(XEN) IRQ80 -> 0:6
(XEN) IRQ88 -> 0:7
(XEN) IRQ96 -> 0:8
(XEN) IRQ104 -> 0:9
(XEN) IRQ241 -> 0:10
(XEN) IRQ112 -> 0:11
(XEN) IRQ120 -> 0:12
(XEN) IRQ136 -> 0:13
(XEN) IRQ144 -> 0:14
(XEN) IRQ152 -> 0:15
(XEN) .................................... done.
(XEN) Using local APIC timer interrupts.
(XEN) calibrating APIC timer ...
(XEN) ..... CPU clock speed is 3893.0033 MHz.
(XEN) ..... host bus clock speed is 99.8206 MHz.
(XEN) ..... bus_scale = 0x6639
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 32 KiB.
(XEN) HVM: ASIDs enabled.
(XEN) SVM: Supported advanced features:
(XEN) - Nested Page Tables (NPT)
(XEN) - Last Branch Record (LBR) Virtualisation
(XEN) - Next-RIP Saved on #VMEXIT
(XEN) - VMCB Clean Bits
(XEN) - DecodeAssists
(XEN) - Pause-Intercept Filter
(XEN) - TSC Rate MSR
(XEN) HVM: SVM enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) HVM: PVH mode not supported on this platform
(XEN) masked ExtINT on CPU#1
(XEN) microcode: CPU1 collect_cpu_info: patch_id=0x6001119
(XEN) masked ExtINT on CPU#2
(XEN) microcode: CPU2 collect_cpu_info: patch_id=0
(XEN) masked ExtINT on CPU#3
(XEN) microcode: CPU3 collect_cpu_info: patch_id=0
(XEN) Brought up 4 CPUs
(XEN) ACPI sleep modes: S3
(XEN) MCA: Use hw thresholding to adjust polling frequency
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) mtrr: your CPUs had inconsistent variable MTRR settings
(XEN) mtrr: probably your BIOS does not setup all CPUs.
(XEN) mtrr: corrected configuration.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0x2000 -> 0xc05000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000223000000->0000000224000000 (1742083 pages to be allocated)
(XEN) Init. ramdisk: 000000024cf75000->000000024ffffe00
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80002000->ffffffff80c05000
(XEN) Init. ramdisk: 0000000000000000->0000000000000000
(XEN) Phys-Mach map: ffffea0000000000->ffffea0000d6ac70
(XEN) Start info: ffffffff80c05000->ffffffff80c054b4
(XEN) Page tables: ffffffff80c06000->ffffffff80c11000
(XEN) Boot stack: ffffffff80c11000->ffffffff80c12000
(XEN) TOTAL: ffffffff80000000->ffffffff81000000
(XEN) ENTRY ADDRESS: ffffffff80002000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) AMD-Vi: Skipping host bridge 0000:00:00.0
(XEN) AMD-Vi: No iommu for device 0000:00:00.2
(XEN) setup 0000:00:00.2 for d0 failed (-19)
(XEN) AMD-Vi: Setup I/O page table: device id = 0x8, type = 0x1, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x9, type = 0x1, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x10, type = 0x2, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x80, type = 0x1, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x81, type = 0x1, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x88, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x90, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x92, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x98, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x9a, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xa0, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xa1, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xa3, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xa4, type = 0x5, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xa5, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xa8, type = 0x2, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xaa, type = 0x2, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xab, type = 0x2, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xc0, type = 0x6, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xc1, type = 0x6, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xc2, type = 0x6, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xc3, type = 0x6, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xc4, type = 0x6, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xc5, type = 0x6, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x100, type = 0x1, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x101, type = 0x1, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x230, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x238, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x300, type = 0x1, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x400, type = 0x1, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x500, type = 0x1, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) Scrubbing Free RAM: .done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 292kB init memory.
(XEN) traps.c:2516:d0 Domain attempted WRMSR 0000000000000413 from 0xc008000001000000 to 0x8008000001000000.
(XEN) traps.c:2516:d0 Domain attempted WRMSR 0000000000000413 from 0xc008000001000000 to 0x8008000001000000.
(XEN) traps.c:2516:d0 Domain attempted WRMSR 0000000000000413 from 0xc008000001000000 to 0x8008000001000000.
(XEN) traps.c:2516:d0 Domain attempted WRMSR 0000000000000413 from 0xc008000001000000 to 0x8008000001000000.
(XEN) PCI: Using MCFG for segment 0000 bus 00-ff
(XEN) mm.c:809: d0: Forcing read-only access to MFN e0002
(XEN) PCI add device 0000:00:00.0
(XEN) PCI add device 0000:00:00.2
(XEN) PCI add device 0000:00:01.0
(XEN) PCI add device 0000:00:01.1
(XEN) PCI add device 0000:00:02.0
(XEN) PCI add device 0000:00:10.0
(XEN) PCI add device 0000:00:10.1
(XEN) SR-IOV device 0000:00:11.0 has its virtual functions already enabled (01ab)
(XEN) PCI add device 0000:00:11.0
(XEN) PCI add device 0000:00:12.0
(XEN) PCI add device 0000:00:12.2
(XEN) PCI add device 0000:00:13.0
(XEN) PCI add device 0000:00:13.2
(XEN) PCI add device 0000:00:14.0
(XEN) PCI add device 0000:00:14.1
(XEN) PCI add device 0000:00:14.3
(XEN) PCI add device 0000:00:14.4
(XEN) PCI add device 0000:00:14.5
(XEN) PCI add device 0000:00:15.0
(XEN) PCI add device 0000:00:15.2
(XEN) PCI add device 0000:00:15.3
(XEN) PCI add device 0000:00:18.0
(XEN) PCI add device 0000:00:18.1
(XEN) PCI add device 0000:00:18.2
(XEN) PCI add device 0000:00:18.3
(XEN) PCI add device 0000:00:18.4
(XEN) PCI add device 0000:00:18.5
(XEN) PCI add device 0000:01:00.0
(XEN) PCI add device 0000:01:00.1
(XEN) PCI add device 0000:02:06.0
(XEN) PCI add device 0000:02:07.0
(XEN) PCI add device 0000:03:00.0
(XEN) PCI add device 0000:04:00.0
(XEN) PCI add device 0000:05:00.0
(XEN) IOAPIC[0]: Set PCI routing entry (5-16 -> 0xa0 -> IRQ 16 Mode:1 Active:1)
(XEN) IOAPIC[0]: Set PCI routing entry (5-17 -> 0xa8 -> IRQ 17 Mode:1 Active:1)
(XEN) IOAPIC[0]: Set PCI routing entry (5-18 -> 0xb0 -> IRQ 18 Mode:1 Active:1)
(XEN) IOAPIC[0]: Set PCI routing entry (5-19 -> 0xb8 -> IRQ 19 Mode:1 Active:1)
(XEN) IOAPIC[0]: Set PCI routing entry (5-21 -> 0xc0 -> IRQ 21 Mode:1 Active:1)
(XEN) IOAPIC[0]: Set PCI routing entry (5-22 -> 0xc8 -> IRQ 22 Mode:1 Active:1)
[ 16.262989] Unable to read sysrq code in control/sysrq
(XEN) APIC error on CPU1: 00(40)
(XEN) APIC error on CPU2: 00(40)
(XEN) APIC error on CPU3: 00(40)
(XEN) APIC error on CPU0: 00(40)
=== hvm dom started ====
(XEN) AMD-Vi: Share p2m table with iommu: p2m table = 0x100029
(XEN) AMD-Vi: Share p2m table with iommu: p2m table = 0x1001be
(XEN) AMD-Vi: Disable: device id = 0x8, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x8, type = 0x1, root table = 0x1001be000, domain = 2, paging mode = 4
(XEN) AMD-Vi: Re-assign 0000:00:01.0 from dom0 to dom2
(XEN) AMD-Vi: Disable: device id = 0x9, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x9, type = 0x1, root table = 0x1001be000, domain = 2, paging mode = 4
(XEN) AMD-Vi: Re-assign 0000:00:01.1 from dom0 to dom2
=== whole system crashed ===
[-- Attachment #3: xl4.4-dmesg --]
[-- Type: application/octet-stream, Size: 17595 bytes --]
Xen 4.4.0_02-297.1
(XEN) Xen version 4.4.0_02-297.1 (abuild@) (gcc (SUSE Linux) 4.8.1 20130909 [gcc-4_8-branch revision 202388]) debug=n Tue Jan 28 16:08:48 UTC 2014
(XEN) Latest ChangeSet:
(XEN) Bootloader: GRUB2 2.00
(XEN) Command line: loglvl=all iommu=debug,verbose apic_verbosity=debug console=com1 com1=115200,8n1,pci
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 3 MBR signatures
(XEN) Found 4 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009e800 (usable)
(XEN) 000000000009e800 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000008d68b000 (usable)
(XEN) 000000008d68b000 - 000000008dd0a000 (reserved)
(XEN) 000000008dd0a000 - 000000008e05a000 (ACPI NVS)
(XEN) 000000008e05a000 - 000000008ea45000 (reserved)
(XEN) 000000008ea45000 - 000000008ea46000 (usable)
(XEN) 000000008ea46000 - 000000008ec4c000 (ACPI NVS)
(XEN) 000000008ec4c000 - 000000008f064000 (usable)
(XEN) 000000008f064000 - 000000008f7f3000 (reserved)
(XEN) 000000008f7f3000 - 000000008f800000 (usable)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fec10000 - 00000000fec11000 (reserved)
(XEN) 00000000fed00000 - 00000000fed01000 (reserved)
(XEN) 00000000fed80000 - 00000000fed90000 (reserved)
(XEN) 00000000ff800000 - 0000000100000000 (reserved)
(XEN) 0000000100001000 - 0000000250000000 (usable)
(XEN) ACPI: RSDP 000F0490, 0024 (r2 ALASKA)
(XEN) ACPI: XSDT 8E04A078, 0074 (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FACP 8E050128, 00F4 (r4 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI Warning (tbfadt-0464): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126]
(XEN) ACPI: DSDT 8E04A188, 5F9E (r2 ALASKA A M I 0 INTL 20051117)
(XEN) ACPI: FACS 8E052E80, 0040
(XEN) ACPI: APIC 8E050220, 0072 (r3 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FPDT 8E050298, 0044 (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: MCFG 8E0502E0, 003C (r1 ALASKA A M I 1072009 MSFT 10013)
(XEN) ACPI: AAFT 8E050320, 00E7 (r1 ALASKA OEMAAFT 1072009 MSFT 97)
(XEN) ACPI: HPET 8E050408, 0038 (r1 ALASKA A M I 1072009 AMI 5)
(XEN) ACPI: IVRS 8E050440, 0070 (r2 AMD ANNAPURN 1 AMD 0)
(XEN) ACPI: SSDT 8E0504B0, 0A60 (r1 AMD ANNAPURN 1 AMD 1)
(XEN) ACPI: SSDT 8E050F10, 04B7 (r2 AMD ANNAPURN 1 MSFT 4000000)
(XEN) ACPI: CRAT 8E0513C8, 02F8 (r1 AMD ANNAPURN 1 AMD 1)
(XEN) System RAM: 7642MB (7825720kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000250000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fd900
(XEN) DMI 2.7 present.
(XEN) APIC boot state is 'xapic'
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: 32/64X FACS address mismatch in FADT - 8e052e80/0000000000000000, using 32
(XEN) ACPI: wakeup_vec[8e052e8c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
(XEN) Processor #16 5:3 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
(XEN) Processor #17 5:3 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
(XEN) Processor #18 5:3 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
(XEN) Processor #19 5:3 APIC version 16
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x10228210 base: 0xfed00000
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs)
(XEN) NR_CPUS:512 nr_cpumask_bits:64
(XEN) mapped APIC to ffff82cfffbfb000 (fee00000)
(XEN) mapped IOAPIC to ffff82cfffbfa000 (fec00000)
(XEN) IRQ limits: 24 GSI, 760 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3893.013 MHz processor.
(XEN) Initing memory sharing.
(XEN) xstate_init: using cntxt_size: 0x3c0 and states: 0x4000000000000007
(XEN) AMD Fam15h machine check reporting enabled
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - ff
(XEN) PCI: Not using MCFG for segment 0000 bus 00-ff
(XEN) AMD-Vi: Found MSI capability block at 0x54
(XEN) AMD-Vi: ACPI Table:
(XEN) AMD-Vi: Signature IVRS
(XEN) AMD-Vi: Length 0x70
(XEN) AMD-Vi: Revision 0x2
(XEN) AMD-Vi: CheckSum 0xe8
(XEN) AMD-Vi: OEM_Id AMD
(XEN) AMD-Vi: OEM_Table_Id ANNAPURN
(XEN) AMD-Vi: OEM_Revision 0x1
(XEN) AMD-Vi: Creator_Id AMD
(XEN) AMD-Vi: Creator_Revision 0
(XEN) AMD-Vi: IVRS Block: type 0x10 flags 0xfe len 0x40 id 0x2
(XEN) AMD-Vi: IVHD Device Entry: type 0x3 id 0x8 flags 0
(XEN) AMD-Vi: Dev_Id Range: 0x8 -> 0xfffe
(XEN) AMD-Vi: IVHD Device Entry: type 0x43 id 0x200 flags 0
(XEN) AMD-Vi: Dev_Id Range: 0x200 -> 0x2ff alias 0xa4
(XEN) AMD-Vi: IVHD Device Entry: type 0 id 0 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x48 id 0 flags 0
(XEN) AMD-Vi: IVHD Special: 0000:00:14.0 variety 0x2 handle 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x48 id 0 flags 0xd7
(XEN) AMD-Vi: IVHD Special: 0000:00:14.0 variety 0x1 handle 0x5
(XEN) AMD-Vi: IOMMU Extended Features:
(XEN) - Prefetch Pages Command
(XEN) - Peripheral Page Service Request
(XEN) - Guest Translation
(XEN) - Invalidate All Command
(XEN) AMD-Vi: PPR Log Enabled.
(XEN) AMD-Vi: Guest Translation Enabled.
(XEN) AMD-Vi: IOMMU 0 Enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) Getting VERSION: 80050010
(XEN) Getting VERSION: 80050010
(XEN) Getting ID: 10000000
(XEN) Getting LVT0: 700
(XEN) Getting LVT1: 400
(XEN) enabled ExtINT on CPU#0
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 5-0, 5-16, 5-17, 5-18, 5-19, 5-20, 5-21, 5-22, 5-23 not connected.
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) number of MP IRQ sources: 15.
(XEN) number of IO-APIC #5 registers: 24.
(XEN) testing the IO APIC.......................
(XEN) IO APIC #5......
(XEN) .... register #00: 05000000
(XEN) ....... : physical APIC id: 05
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178021
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0021
(XEN) .... register #02: 05000000
(XEN) ....... : arbitration: 05
(XEN) .... register #03: 05018021
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 1 30
(XEN) 01 001 01 0 0 0 0 0 1 1 30
(XEN) 02 001 01 0 0 0 0 0 1 1 F0
(XEN) 03 001 01 0 0 0 0 0 1 1 38
(XEN) 04 001 01 0 0 0 0 0 1 1 40
(XEN) 05 001 01 0 0 0 0 0 1 1 48
(XEN) 06 001 01 0 0 0 0 0 1 1 50
(XEN) 07 001 01 0 0 0 0 0 1 1 58
(XEN) 08 001 01 0 0 0 0 0 1 1 60
(XEN) 09 001 01 1 1 0 1 0 1 0 00
(XEN) 0a 001 01 0 0 0 0 0 1 1 F1
(XEN) 0b 001 01 0 0 0 0 0 1 1 70
(XEN) 0c 001 01 0 0 0 0 0 1 1 78
(XEN) 0d 001 01 0 0 0 0 0 1 1 88
(XEN) 0e 001 01 0 0 0 0 0 1 1 90
(XEN) 0f 001 01 0 0 0 0 0 1 1 98
(XEN) 10 000 00 1 0 0 0 0 0 1 30
(XEN) 11 000 00 1 0 0 0 0 0 1 30
(XEN) 12 000 00 1 0 0 0 0 0 1 30
(XEN) 13 000 00 1 0 0 0 0 0 1 30
(XEN) 14 000 00 1 0 0 0 0 0 1 30
(XEN) 15 000 00 1 0 0 0 0 0 1 30
(XEN) 16 000 00 1 0 0 0 0 0 1 30
(XEN) 17 000 00 1 0 0 0 0 0 1 30
(XEN) Using vector-based indexing
(XEN) IRQ to pin mappings:
(XEN) IRQ240 -> 0:2
(XEN) IRQ48 -> 0:1
(XEN) IRQ56 -> 0:3
(XEN) IRQ64 -> 0:4
(XEN) IRQ72 -> 0:5
(XEN) IRQ80 -> 0:6
(XEN) IRQ88 -> 0:7
(XEN) IRQ96 -> 0:8
(XEN) IRQ104 -> 0:9
(XEN) IRQ241 -> 0:10
(XEN) IRQ112 -> 0:11
(XEN) IRQ120 -> 0:12
(XEN) IRQ136 -> 0:13
(XEN) IRQ144 -> 0:14
(XEN) IRQ152 -> 0:15
(XEN) .................................... done.
(XEN) Using local APIC timer interrupts.
(XEN) calibrating APIC timer ...
(XEN) ..... CPU clock speed is 3892.9981 MHz.
(XEN) ..... host bus clock speed is 99.8204 MHz.
(XEN) ..... bus_scale = 0x6639
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 32 KiB.
(XEN) HVM: ASIDs enabled.
(XEN) SVM: Supported advanced features:
(XEN) - Nested Page Tables (NPT)
(XEN) - Last Branch Record (LBR) Virtualisation
(XEN) - Next-RIP Saved on #VMEXIT
(XEN) - VMCB Clean Bits
(XEN) - DecodeAssists
(XEN) - Pause-Intercept Filter
(XEN) - TSC Rate MSR
(XEN) HVM: SVM enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) HVM: PVH mode not supported on this platform
(XEN) masked ExtINT on CPU#1
(XEN) microcode: CPU1 collect_cpu_info: patch_id=0x6001119
(XEN) masked ExtINT on CPU#2
(XEN) microcode: CPU2 collect_cpu_info: patch_id=0
(XEN) masked ExtINT on CPU#3
(XEN) microcode: CPU3 collect_cpu_info: patch_id=0
(XEN) Brought up 4 CPUs
(XEN) ACPI sleep modes: S3
(XEN) MCA: Use hw thresholding to adjust polling frequency
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) mtrr: your CPUs had inconsistent variable MTRR settings
(XEN) mtrr: probably your BIOS does not setup all CPUs.
(XEN) mtrr: corrected configuration.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0x2000 -> 0xc05000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000223000000->0000000224000000 (1742083 pages to be allocated)
(XEN) Init. ramdisk: 000000024cf75000->000000024ffffe00
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80002000->ffffffff80c05000
(XEN) Init. ramdisk: 0000000000000000->0000000000000000
(XEN) Phys-Mach map: ffffea0000000000->ffffea0000d6ac70
(XEN) Start info: ffffffff80c05000->ffffffff80c054b4
(XEN) Page tables: ffffffff80c06000->ffffffff80c11000
(XEN) Boot stack: ffffffff80c11000->ffffffff80c12000
(XEN) TOTAL: ffffffff80000000->ffffffff81000000
(XEN) ENTRY ADDRESS: ffffffff80002000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) AMD-Vi: Skipping host bridge 0000:00:00.0
(XEN) AMD-Vi: No iommu for device 0000:00:00.2
(XEN) setup 0000:00:00.2 for d0 failed (-19)
(XEN) AMD-Vi: Setup I/O page table: device id = 0x8, type = 0x1, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x9, type = 0x1, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x10, type = 0x2, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x80, type = 0x1, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x81, type = 0x1, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x88, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x90, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x92, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x98, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x9a, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xa0, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xa1, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xa3, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xa4, type = 0x5, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xa5, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xa8, type = 0x2, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xaa, type = 0x2, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xab, type = 0x2, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xc0, type = 0x6, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xc1, type = 0x6, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xc2, type = 0x6, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xc3, type = 0x6, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xc4, type = 0x6, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xc5, type = 0x6, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x100, type = 0x1, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x101, type = 0x1, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x230, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x238, type = 0x7, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x300, type = 0x1, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x400, type = 0x1, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x500, type = 0x1, root table = 0x224fc3000, domain = 0, paging mode = 3
(XEN) Scrubbing Free RAM: .done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 292kB init memory.
(XEN) traps.c:2516:d0 Domain attempted WRMSR 0000000000000413 from 0xc008000001000000 to 0x8008000001000000.
(XEN) traps.c:2516:d0 Domain attempted WRMSR 0000000000000413 from 0xc008000001000000 to 0x8008000001000000.
(XEN) traps.c:2516:d0 Domain attempted WRMSR 0000000000000413 from 0xc008000001000000 to 0x8008000001000000.
(XEN) traps.c:2516:d0 Domain attempted WRMSR 0000000000000413 from 0xc008000001000000 to 0x8008000001000000.
(XEN) PCI: Using MCFG for segment 0000 bus 00-ff
(XEN) mm.c:809: d0: Forcing read-only access to MFN e0002
(XEN) PCI add device 0000:00:00.0
(XEN) PCI add device 0000:00:00.2
(XEN) PCI add device 0000:00:01.0
(XEN) PCI add device 0000:00:01.1
(XEN) PCI add device 0000:00:02.0
(XEN) PCI add device 0000:00:10.0
(XEN) PCI add device 0000:00:10.1
(XEN) SR-IOV device 0000:00:11.0 has its virtual functions already enabled (01ab)
(XEN) PCI add device 0000:00:11.0
(XEN) PCI add device 0000:00:12.0
(XEN) PCI add device 0000:00:12.2
(XEN) PCI add device 0000:00:13.0
(XEN) PCI add device 0000:00:13.2
(XEN) PCI add device 0000:00:14.0
(XEN) PCI add device 0000:00:14.1
(XEN) PCI add device 0000:00:14.3
(XEN) PCI add device 0000:00:14.4
(XEN) PCI add device 0000:00:14.5
(XEN) PCI add device 0000:00:15.0
(XEN) PCI add device 0000:00:15.2
(XEN) PCI add device 0000:00:15.3
(XEN) PCI add device 0000:00:18.0
(XEN) PCI add device 0000:00:18.1
(XEN) PCI add device 0000:00:18.2
(XEN) PCI add device 0000:00:18.3
(XEN) PCI add device 0000:00:18.4
(XEN) PCI add device 0000:00:18.5
(XEN) PCI add device 0000:01:00.0
(XEN) PCI add device 0000:01:00.1
(XEN) PCI add device 0000:02:06.0
(XEN) PCI add device 0000:02:07.0
(XEN) PCI add device 0000:03:00.0
(XEN) PCI add device 0000:04:00.0
(XEN) PCI add device 0000:05:00.0
(XEN) IOAPIC[0]: Set PCI routing entry (5-16 -> 0xa0 -> IRQ 16 Mode:1 Active:1)
(XEN) IOAPIC[0]: Set PCI routing entry (5-17 -> 0xa8 -> IRQ 17 Mode:1 Active:1)
(XEN) IOAPIC[0]: Set PCI routing entry (5-18 -> 0xb0 -> IRQ 18 Mode:1 Active:1)
(XEN) IOAPIC[0]: Set PCI routing entry (5-19 -> 0xb8 -> IRQ 19 Mode:1 Active:1)
(XEN) IOAPIC[0]: Set PCI routing entry (5-21 -> 0xc0 -> IRQ 21 Mode:1 Active:1)
(XEN) IOAPIC[0]: Set PCI routing entry (5-22 -> 0xc8 -> IRQ 22 Mode:1 Active:1)
(XEN) APIC error on CPU3: 00(40)
(XEN) APIC error on CPU0: 00(40)
(XEN) APIC error on CPU2: 00(40)
(XEN) APIC error on CPU1: 00(40)
(XEN) AMD-Vi: Share p2m table with iommu: p2m table = 0x1caac0
[-- Attachment #4: dom0-dmesg --]
[-- Type: application/octet-stream, Size: 62949 bytes --]
[ 0.000000] BRK [0x00add000, 0x00addfff] PUD
[ 0.000000] BRK [0x00ade000, 0x00adefff] PMD
[ 0.000000] BRK [0x00adf000, 0x00ae5fff] PTE
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.6-4-xen (geeko@buildhost) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #1 SMP Wed Oct 30 18:04:56 UTC 2013 (e6d4a27)
[ 0.000000] Command line: root=UUID=7cac86d2-796d-4fff-926e-c6d65219b54c ro quiet quiet resume=/dev/disk/by-id/ata-ST3320620AS_5QF5DRMP-part6 splash=silent quiet showopts
[ 0.000000] Xen-provided machine memory map:
[ 0.000000] BIOS: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS: [mem 0x0000000000100000-0x000000008d68afff] usable
[ 0.000000] BIOS: [mem 0x000000008d68b000-0x000000008dd09fff] reserved
[ 0.000000] BIOS: [mem 0x000000008dd0a000-0x000000008e059fff] ACPI NVS
[ 0.000000] BIOS: [mem 0x000000008e05a000-0x000000008ea44fff] reserved
[ 0.000000] BIOS: [mem 0x000000008ea45000-0x000000008ea45fff] usable
[ 0.000000] BIOS: [mem 0x000000008ea46000-0x000000008ec4bfff] ACPI NVS
[ 0.000000] BIOS: [mem 0x000000008ec4c000-0x000000008f063fff] usable
[ 0.000000] BIOS: [mem 0x000000008f064000-0x000000008f7f2fff] reserved
[ 0.000000] BIOS: [mem 0x000000008f7f3000-0x000000008f7fffff] usable
[ 0.000000] BIOS: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS: [mem 0x0000000100001000-0x000000024fffffff] usable
[ 0.000000] BIOS: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[ 0.000000] e820: Xen-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x00000001add8dfff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./FM2A75 Pro4, BIOS P2.40 07/11/2013
[ 0.000000] e820: last_pfn = 0x1add8e max_arch_pfn = 0x80000000
[ 0.000000] e820: last_pfn = 0x100000 max_arch_pfn = 0x80000000
[ 0.000000] found SMP MP-table at [mem 0x000fd900-0x000fd90f] mapped at [ffffffffff5ef900]
[ 0.000000] init_memory_mapping: [mem 0x1ad200000-0x1ad3fffff]
[ 0.000000] [mem 0x1ad200000-0x1ad3fffff] page 4k
[ 0.000000] BRK [0x00ae7000, 0x00ae7fff] PGTABLE
[ 0.000000] BRK [0x00ae8000, 0x00ae8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1ac000000-0x1ad1fffff]
[ 0.000000] [mem 0x1ac000000-0x1ad1fffff] page 4k
[ 0.000000] BRK [0x00ae9000, 0x00ae9fff] PGTABLE
[ 0.000000] BRK [0x00aea000, 0x00aeafff] PGTABLE
[ 0.000000] BRK [0x00aeb000, 0x00aebfff] PGTABLE
[ 0.000000] BRK [0x00aec000, 0x00aecfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x1abffffff]
[ 0.000000] [mem 0x180000000-0x1abffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x17fffffff]
[ 0.000000] [mem 0x00000000-0x17fffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x1ad400000-0x1add8dfff]
[ 0.000000] [mem 0x1ad400000-0x1add8dfff] page 4k
[ 0.000000] RAMDISK: [mem 0x01000000-0x0408afff]
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 000000008e04a078 00074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 000000008e050128 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130517/tbfadt-603)
[ 0.000000] ACPI: DSDT 000000008e04a188 05F9E (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 000000008e052e80 00040
[ 0.000000] ACPI: APIC 000000008e050220 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 000000008e050298 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 000000008e0502e0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: AAFT 000000008e050320 000E7 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000008e050408 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: IVRS 000000008e050440 00070 (v02 AMD ANNAPURN 00000001 AMD 00000000)
[ 0.000000] ACPI: SSDT 000000008e0504b0 00A60 (v01 AMD ANNAPURN 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 000000008e050f10 004B7 (v02 AMD ANNAPURN 00000001 MSFT 04000000)
[ 0.000000] ACPI: CRAT 000000008e0513c8 002F8 (v01 AMD ANNAPURN 00000001 AMD 00000001)
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00000000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1add8dfff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x1add8dfff]
[ 0.000000] On node 0 totalpages: 1760654
[ 0.000000] free_area_init_node: node 0, pgdat ffffffff80962440, node_mem_map ffff8801a6888000
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4096 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 1044480 pages, LIFO batch:31
[ 0.000000] Normal zone: 9736 pages used for memmap
[ 0.000000] Normal zone: 712078 pages, LIFO batch:31
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] e820: [mem 0x8f800000-0xfebfffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 19 pages/cpu @ffff8801a5800000 s48064 r8192 d21568 u524288
[ 0.000000] pcpu-alloc: s48064 r8192 d21568 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Swapping MFNs for PFN 988 and 1a5807 (MFN 223988 and 110f7)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1736582
[ 0.000000] Kernel command line: root=UUID=7cac86d2-796d-4fff-926e-c6d65219b54c ro quiet quiet resume=/dev/disk/by-id/ata-ST3320620AS_5QF5DRMP-part6 splash=silent quiet showopts
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] allocated 28170464 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Software IO TLB enabled:
Aperture: 64 megabytes
Address size: 27 bits
Kernel range: ffff88019f122000 - ffff8801a3122000
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Memory: 6731676K/7042616K available (5274K kernel code, 553K rwdata, 3876K rodata, 492K init, 868K bss, 310940K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-511.
[ 0.000000] nr_pirqs: 40
[ 0.000000] NR_IRQS:67328 nr_irqs:2792 16
[ 0.000000] Xen reported: 3893.012 MHz processor.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [xvc-1] enabled
[ 0.080001] Calibrating delay using timer specific routine.. 7893.16 BogoMIPS (lpj=15786325)
[ 0.080004] pid_max: default: 32768 minimum: 301
[ 0.080027] Security Framework initialized
[ 0.080042] AppArmor: AppArmor initialized
[ 0.080051] Mount-cache hash table entries: 256
[ 0.080187] Initializing cgroup subsys memory
[ 0.080198] Initializing cgroup subsys devices
[ 0.080200] Initializing cgroup subsys freezer
[ 0.080201] Initializing cgroup subsys net_cls
[ 0.080202] Initializing cgroup subsys blkio
[ 0.080204] Initializing cgroup subsys perf_event
[ 0.080229] mce: CPU supports 2 MCE banks
[ 0.080246] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
[ 0.109909] ACPI: Core revision 20130517
[ 0.116448] ACPI: All ACPI Tables successfully acquired
[ 0.120694] SMP alternatives: switching to SMP code
[ 0.150649] Brought up 4 CPUs
[ 0.150707] devtmpfs: initialized
[ 0.150707] RTC time: 22:29:52, date: 02/03/14
[ 0.150707] NET: Registered protocol family 16
[ 0.150707] ACPI: bus type PCI registered
[ 0.150707] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.150707] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.150707] PCI: not using MMCONFIG
[ 0.150707] PCI: Using configuration type 1 for base access
[ 0.150707] PCI: Using configuration type 1 for extended access
[ 0.152029] bio: create slab <bio-0> at 0
[ 0.152072] ACPI: Added _OSI(Module Device)
[ 0.152074] ACPI: Added _OSI(Processor Device)
[ 0.152075] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.152077] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.152892] ACPI: EC: Look up EC in DSDT
[ 0.153765] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.157373] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.158117] ACPI: Interpreter enabled
[ 0.158122] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 0.158126] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.158135] ACPI: (supports S0 S3 S5)
[ 0.158136] ACPI: Using IOAPIC for interrupt routing
[ 0.158366] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.158416] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.256777] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.256843] ACPI: No dock devices found.
[ 0.265863] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.266110] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
[ 0.266445] acpi PNP0A03:00: ACPI _OSC control (0x19) granted
[ 0.266945] PCI host bridge to bus 0000:00
[ 0.266948] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.266950] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.266951] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.266953] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.266954] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.266956] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.266958] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.266959] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xffffffff]
[ 0.266970] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.267121] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
[ 0.267289] pci 0000:00:01.0: [1002:990e] type 00 class 0x030000
[ 0.267303] pci 0000:00:01.0: reg 0x10: [mem 0xb0000000-0xbfffffff pref]
[ 0.267313] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
[ 0.267323] pci 0000:00:01.0: reg 0x18: [mem 0xff700000-0xff73ffff]
[ 0.267399] pci 0000:00:01.0: supports D1 D2
[ 0.267477] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.267490] pci 0000:00:01.1: reg 0x10: [mem 0xff740000-0xff743fff]
[ 0.267581] pci 0000:00:01.1: supports D1 D2
[ 0.267664] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
[ 0.267754] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.267809] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.267888] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
[ 0.267914] pci 0000:00:10.0: reg 0x10: [mem 0xff746000-0xff747fff 64bit]
[ 0.268005] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.268073] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.268128] pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
[ 0.268155] pci 0000:00:10.1: reg 0x10: [mem 0xff744000-0xff745fff 64bit]
[ 0.268297] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.268359] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.268411] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.268437] pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
[ 0.268450] pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
[ 0.268462] pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
[ 0.268475] pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
[ 0.268487] pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
[ 0.268500] pci 0000:00:11.0: reg 0x24: [mem 0xff74d000-0xff74d7ff]
[ 0.268637] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.268655] pci 0000:00:12.0: reg 0x10: [mem 0xff74c000-0xff74cfff]
[ 0.268775] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.268820] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.268845] pci 0000:00:12.2: reg 0x10: [mem 0xff74b000-0xff74b0ff]
[ 0.268961] pci 0000:00:12.2: supports D1 D2
[ 0.268963] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.269012] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.269056] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.269074] pci 0000:00:13.0: reg 0x10: [mem 0xff74a000-0xff74afff]
[ 0.269216] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.269261] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.269286] pci 0000:00:13.2: reg 0x10: [mem 0xff749000-0xff7490ff]
[ 0.269402] pci 0000:00:13.2: supports D1 D2
[ 0.269404] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.269454] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.269497] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.269652] pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
[ 0.269670] pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
[ 0.269683] pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
[ 0.269696] pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
[ 0.269709] pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
[ 0.269721] pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
[ 0.269825] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.270724] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.270810] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.270845] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[ 0.270863] pci 0000:00:14.5: reg 0x10: [mem 0xff748000-0xff748fff]
[ 0.270980] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.271026] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[ 0.271137] pci 0000:00:15.0: supports D1 D2
[ 0.271192] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.271235] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
[ 0.271346] pci 0000:00:15.2: supports D1 D2
[ 0.271401] pci 0000:00:15.2: System wakeup disabled by ACPI
[ 0.271441] pci 0000:00:15.3: [1022:43a3] type 01 class 0x060400
[ 0.271552] pci 0000:00:15.3: supports D1 D2
[ 0.271607] pci 0000:00:15.3: System wakeup disabled by ACPI
[ 0.271648] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.271747] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.271845] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.271941] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.272000] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.272093] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.272278] pci 0000:01:00.0: [1002:6819] type 00 class 0x030000
[ 0.272298] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.272315] pci 0000:01:00.0: reg 0x18: [mem 0xff600000-0xff63ffff 64bit]
[ 0.272326] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.272347] pci 0000:01:00.0: reg 0x30: [mem 0xff640000-0xff65ffff pref]
[ 0.272411] pci 0000:01:00.0: supports D1 D2
[ 0.272413] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.272487] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[ 0.272507] pci 0000:01:00.1: reg 0x10: [mem 0xff660000-0xff663fff 64bit]
[ 0.272619] pci 0000:01:00.1: supports D1 D2
[ 0.280032] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.280041] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.280045] pci 0000:00:02.0: bridge window [mem 0xff600000-0xff6fffff]
[ 0.280051] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.280119] pci 0000:02:06.0: [1102:0007] type 00 class 0x040100
[ 0.280153] pci 0000:02:06.0: reg 0x10: [io 0xd000-0xd01f]
[ 0.280280] pci 0000:02:06.0: supports D1 D2
[ 0.280345] pci 0000:02:07.0: [9710:9835] type 00 class 0x070002
[ 0.280368] pci 0000:02:07.0: reg 0x10: [io 0xd070-0xd077]
[ 0.280383] pci 0000:02:07.0: reg 0x14: [io 0xd060-0xd067]
[ 0.280398] pci 0000:02:07.0: reg 0x18: [io 0xd050-0xd057]
[ 0.280414] pci 0000:02:07.0: reg 0x1c: [io 0xd040-0xd047]
[ 0.280429] pci 0000:02:07.0: reg 0x20: [io 0xd030-0xd037]
[ 0.280444] pci 0000:02:07.0: reg 0x24: [io 0xd020-0xd02f]
[ 0.280551] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.280556] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 0.280564] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.280566] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.280567] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.280569] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.280570] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.280572] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.280573] pci 0000:00:14.4: bridge window [mem 0xb0000000-0xffffffff] (subtractive decode)
[ 0.280680] pci 0000:03:00.0: [1131:7160] type 00 class 0x048000
[ 0.280714] pci 0000:03:00.0: reg 0x10: [mem 0xff500000-0xff5fffff 64bit]
[ 0.280889] pci 0000:03:00.0: supports D1 D2
[ 0.280890] pci 0000:03:00.0: PME# supported from D0 D1 D2
[ 0.280954] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.280966] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.280977] pci 0000:00:15.0: bridge window [mem 0xff500000-0xff5fffff]
[ 0.281087] pci 0000:04:00.0: [1b6f:7052] type 00 class 0x0c0330
[ 0.281119] pci 0000:04:00.0: reg 0x10: [mem 0xff400000-0xff407fff 64bit]
[ 0.281299] pci 0000:04:00.0: supports D1 D2
[ 0.281300] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.288035] pci 0000:00:15.2: PCI bridge to [bus 04]
[ 0.288048] pci 0000:00:15.2: bridge window [mem 0xff400000-0xff4fffff]
[ 0.288173] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.288197] pci 0000:05:00.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.288235] pci 0000:05:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.288260] pci 0000:05:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.288366] pci 0000:05:00.0: supports D1 D2
[ 0.288367] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.296034] pci 0000:00:15.3: PCI bridge to [bus 05]
[ 0.296044] pci 0000:00:15.3: bridge window [io 0xc000-0xcfff]
[ 0.296055] pci 0000:00:15.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.296090] pci_bus 0000:00: on NUMA node 0
[ 0.296748] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.296846] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.296950] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.297059] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.297140] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.297203] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.297266] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.297329] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.297466] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.297496] Found 1 acpi root devices
[ 0.297621] pci 0000:00:00.2: GSI16: level-low
[ 0.297703] pci 0000:00:01.0: GSI17: level-low
[ 0.297785] pci 0000:00:01.1: GSI18: level-low
[ 0.298115] pci 0000:00:11.0: GSI19: level-low
[ 0.298865] pci 0000:02:06.0: GSI21: level-low
[ 0.298902] pci 0000:02:07.0: GSI22: level-low
[ 0.298991] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=mem,locks=none
[ 0.298991] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.298991] vgaarb: loaded
[ 0.298991] vgaarb: bridge control possible 0000:01:00.0
[ 0.298991] vgaarb: no bridge control possible 0000:00:01.0
[ 0.298991] xen_mem: Initialising balloon driver.
[ 0.298991] SCSI subsystem initialized
[ 0.298991] ACPI: bus type ATA registered
[ 0.298991] libata version 3.00 loaded.
[ 0.298991] PCI: Using ACPI for IRQ routing
[ 0.311771] PCI: pci_cache_line_size set to 64 bytes
[ 0.311885] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.311887] e820: reserve RAM buffer [mem 0x8d68b000-0x8fffffff]
[ 0.311889] e820: reserve RAM buffer [mem 0x8ea46000-0x8fffffff]
[ 0.311890] e820: reserve RAM buffer [mem 0x8f064000-0x8fffffff]
[ 0.311891] e820: reserve RAM buffer [mem 0x8f800000-0x8fffffff]
[ 0.311958] NetLabel: Initializing
[ 0.311959] NetLabel: domain hash size = 128
[ 0.311960] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.311968] NetLabel: unlabeled traffic allowed by default
[ 0.312000] Switched to clocksource xen
[ 0.312000] AppArmor: AppArmor Filesystem Enabled
[ 0.312000] pnp: PnP ACPI init
[ 0.312000] ACPI: bus type PNP registered
[ 0.312000] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.312000] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.312000] system 00:01: [mem 0x90000000-0xafffffff] has been reserved
[ 0.312000] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312000] system 00:02: [mem 0xfeb80000-0xfebfffff] has been reserved
[ 0.312000] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312000] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.312000] system 00:03: [io 0x040b] has been reserved
[ 0.312000] system 00:03: [io 0x04d6] has been reserved
[ 0.312000] system 00:03: [io 0x0c00-0x0c01] has been reserved
[ 0.312000] system 00:03: [io 0x0c14] has been reserved
[ 0.312000] system 00:03: [io 0x0c50-0x0c51] has been reserved
[ 0.312000] system 00:03: [io 0x0c52] has been reserved
[ 0.312000] system 00:03: [io 0x0c6c] has been reserved
[ 0.312000] system 00:03: [io 0x0c6f] has been reserved
[ 0.312000] system 00:03: [io 0x0cd0-0x0cd1] has been reserved
[ 0.312000] system 00:03: [io 0x0cd2-0x0cd3] has been reserved
[ 0.312000] system 00:03: [io 0x0cd4-0x0cd5] has been reserved
[ 0.312000] system 00:03: [io 0x0cd6-0x0cd7] has been reserved
[ 0.312000] system 00:03: [io 0x0cd8-0x0cdf] has been reserved
[ 0.312000] system 00:03: [io 0x0800-0x089f] could not be reserved
[ 0.312000] system 00:03: [io 0x0b20-0x0b3f] has been reserved
[ 0.312000] system 00:03: [io 0x0900-0x090f] has been reserved
[ 0.312000] system 00:03: [io 0x0910-0x091f] has been reserved
[ 0.312000] system 00:03: [io 0xfe00-0xfefe] has been reserved
[ 0.312000] system 00:03: [mem 0xfec00000-0xfec00fff] has been reserved
[ 0.312000] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.312000] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.312000] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.312000] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.312000] system 00:03: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.312000] system 00:03: [mem 0xff800000-0xffffffff] has been reserved
[ 0.312000] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312000] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.312000] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312000] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312000] pnp 00:06: [dma 4]
[ 0.312000] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.312000] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.312000] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.312000] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.312000] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312000] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.312000] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.312000] pnp: PnP ACPI: found 12 devices
[ 0.312000] ACPI: bus type PNP unregistered
[ 0.314083] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.314088] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.314093] pci 0000:00:02.0: bridge window [mem 0xff600000-0xff6fffff]
[ 0.314097] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.314103] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.314106] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 0.314122] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.314128] pci 0000:00:15.0: bridge window [mem 0xff500000-0xff5fffff]
[ 0.314137] pci 0000:00:15.2: PCI bridge to [bus 04]
[ 0.314143] pci 0000:00:15.2: bridge window [mem 0xff400000-0xff4fffff]
[ 0.314153] pci 0000:00:15.3: PCI bridge to [bus 05]
[ 0.314156] pci 0000:00:15.3: bridge window [io 0xc000-0xcfff]
[ 0.314164] pci 0000:00:15.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.314522] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.314524] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.314525] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.314527] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.314528] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.314530] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.314531] pci_bus 0000:00: resource 10 [mem 0xb0000000-0xffffffff]
[ 0.314533] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.314534] pci_bus 0000:01: resource 1 [mem 0xff600000-0xff6fffff]
[ 0.314536] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.314537] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.314539] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
[ 0.314540] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
[ 0.314542] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
[ 0.314543] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
[ 0.314544] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.314546] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.314547] pci_bus 0000:02: resource 10 [mem 0xb0000000-0xffffffff]
[ 0.314549] pci_bus 0000:03: resource 1 [mem 0xff500000-0xff5fffff]
[ 0.314550] pci_bus 0000:04: resource 1 [mem 0xff400000-0xff4fffff]
[ 0.314552] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 0.314553] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.314631] NET: Registered protocol family 2
[ 0.314800] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.315014] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.315237] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.315271] TCP: reno registered
[ 0.315274] UDP hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.315326] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.315473] NET: Registered protocol family 1
[ 0.315509] pci 0000:00:01.0: Boot video device
[ 0.560274] pci 0000:01:00.0: Boot video device
[ 0.560451] PCI: CLS 64 bytes, default 64
[ 0.560492] Unpacking initramfs...
[ 0.602182] Freeing initrd memory: 49708K (ffff880001000000 - ffff88000408b000)
[ 0.602514] audit: initializing netlink socket (disabled)
[ 0.602525] type=2000 audit(1391466591.600:1): initialized
[ 0.625670] zbud: loaded
[ 0.625855] VFS: Disk quotas dquot_6.5.2
[ 0.625880] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.626120] msgmni has been set to 13836
[ 0.626408] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.626451] io scheduler noop registered
[ 0.626452] io scheduler deadline registered
[ 0.626472] io scheduler cfq registered (default)
[ 0.626763] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.626773] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.626843] GHES: HEST is not enabled!
[ 0.626955] Non-volatile memory driver v1.3
[ 0.626959] Linux agpgart interface v0.103
[ 0.627388] Xen virtual console successfully installed as xvc0
[ 0.627452] ahci 0000:00:11.0: version 3.0
[ 0.627656] ahci 0000:00:11.0: irq 44 (276) ... 47 (279) for MSI
[ 0.627717] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
[ 0.627719] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part sxs
[ 0.628221] scsi0 : ahci
[ 0.628322] scsi1 : ahci
[ 0.628369] scsi2 : ahci
[ 0.628408] ata1: SATA max UDMA/133 abar m2048@0xff74d000 port 0xff74d100 irq 44
[ 0.628410] ata2: SATA max UDMA/133 abar m2048@0xff74d000 port 0xff74d180 irq 45
[ 0.628412] ata3: SATA max UDMA/133 abar m2048@0xff74d000 port 0xff74d200 irq 46
[ 0.628465] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.631157] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.631165] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.631286] mousedev: PS/2 mouse device common for all mice
[ 0.631380] rtc_cmos 00:07: RTC can wake from S4
[ 0.631520] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.631552] rtc_cmos 00:07: alarms up to one month, y3k, 114 bytes nvram
[ 0.631558] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.631571] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.631690] TCP: cubic registered
[ 0.631765] NET: Registered protocol family 10
[ 0.631898] Key type dns_resolver registered
[ 0.631979] MCE: bind virq for DOM0 logging
[ 0.631998] MCE_DOM0_LOG: enter dom0 mce vIRQ handler
[ 0.632000] MCE_DOM0_LOG: No more urgent data
[ 0.632001] MCE_DOM0_LOG: No more nonurgent data
[ 0.632127] registered taskstats version 1
[ 0.632675] Magic number: 2:460:501
[ 0.632741] rtc_cmos 00:07: setting system clock to 2014-02-03 22:29:52 UTC (1391466592)
[ 1.120101] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.120124] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.120143] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.121371] ata2.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA580, max UDMA/133
[ 1.121374] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.121736] ata1.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
[ 1.121739] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.122673] ata2.00: configured for UDMA/133
[ 1.123740] ata1.00: configured for UDMA/133
[ 1.123849] scsi 0:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5
[ 1.124027] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.124081] sd 0:0:0:0: [sda] Write Protect is off
[ 1.124084] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.124116] scsi 1:0:0:0: Direct-Access ATA Hitachi HDS5C302 ML6O PQ: 0 ANSI: 5
[ 1.124117] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.124266] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.124303] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.124310] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.124328] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.125793] sdb: sdb1
[ 1.126005] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.167230] ata3.00: HPA detected: current 625140335, native 625142448
[ 1.167235] ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
[ 1.167236] ata3.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.169189] sda: sda1 sda4 < sda5 sda6 >
[ 1.169438] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.225537] ata3.00: configured for UDMA/133
[ 1.225622] scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 1.225735] sd 2:0:0:0: [sdc] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[ 1.225779] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.225781] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.225794] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.337578] sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 > sdc3 sdc4
[ 1.338037] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.338308] Freeing unused kernel memory: 492K (ffff880000981000 - ffff8800009fc000)
[ 1.338310] Write protecting the kernel read-only data: 9164k
[ 1.386688] pciback 0000:00:01.0: seizing device
[ 1.386699] pciback 0000:00:01.1: seizing device
[ 1.416258] pciback 0000:00:01.0: enabling device (0006 -> 0007)
[ 1.448316] pciback: backend is vpci
[ 1.450697] Initialising virtual ethernet driver.
[ 1.458679] emc: device handler registered
[ 1.460755] rdac: device handler registered
[ 1.462603] hp_sw: device handler registered
[ 1.464647] alua: device handler registered
[ 1.470866] systemd-udevd[123]: starting version 208
[ 1.484449] [drm] Initialized drm 1.1.0 20060810
[ 1.492030] ACPI: bus type USB registered
[ 1.492077] usbcore: registered new interface driver usbfs
[ 1.492087] usbcore: registered new interface driver hub
[ 1.493972] usbcore: registered new device driver usb
[ 1.494671] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.494678] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 1.494715] QUIRK: Enable AMD PLL fix
[ 1.495009] xhci_hcd 0000:00:10.0: irq 49 (275) for MSI/MSI-X
[ 1.495054] xhci_hcd 0000:00:10.0: irq 50 (274) for MSI/MSI-X
[ 1.495099] xhci_hcd 0000:00:10.0: irq 51 (273) for MSI/MSI-X
[ 1.495142] xhci_hcd 0000:00:10.0: irq 52 (272) for MSI/MSI-X
[ 1.495186] xhci_hcd 0000:00:10.0: irq 53 (271) for MSI/MSI-X
[ 1.495310] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.495312] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.495314] usb usb1: Product: xHCI Host Controller
[ 1.495316] usb usb1: Manufacturer: Linux 3.11.6-4-xen xhci_hcd
[ 1.495318] usb usb1: SerialNumber: 0000:00:10.0
[ 1.495423] xHCI xhci_add_endpoint called for root hub
[ 1.495427] xHCI xhci_check_bandwidth called for root hub
[ 1.495472] hub 1-0:1.0: USB hub found
[ 1.495481] hub 1-0:1.0: 2 ports detected
[ 1.495582] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.495586] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.495943] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.496155] ehci-pci: EHCI PCI platform driver
[ 1.498312] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.498316] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.498318] usb usb2: Product: xHCI Host Controller
[ 1.498320] usb usb2: Manufacturer: Linux 3.11.6-4-xen xhci_hcd
[ 1.498321] usb usb2: SerialNumber: 0000:00:10.0
[ 1.498439] xHCI xhci_add_endpoint called for root hub
[ 1.498441] xHCI xhci_check_bandwidth called for root hub
[ 1.498464] hub 2-0:1.0: USB hub found
[ 1.498470] hub 2-0:1.0: 2 ports detected
[ 1.504602] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.505446] ohci-pci: OHCI PCI platform driver
[ 1.511056] [drm] radeon kernel modesetting enabled.
[ 1.528358] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.528367] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.528656] xhci_hcd 0000:00:10.1: irq 54 (270) for MSI/MSI-X
[ 1.528702] xhci_hcd 0000:00:10.1: irq 55 (269) for MSI/MSI-X
[ 1.528747] xhci_hcd 0000:00:10.1: irq 56 (268) for MSI/MSI-X
[ 1.528792] xhci_hcd 0000:00:10.1: irq 57 (267) for MSI/MSI-X
[ 1.528837] xhci_hcd 0000:00:10.1: irq 58 (266) for MSI/MSI-X
[ 1.528964] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.528967] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.528969] usb usb3: Product: xHCI Host Controller
[ 1.528970] usb usb3: Manufacturer: Linux 3.11.6-4-xen xhci_hcd
[ 1.528972] usb usb3: SerialNumber: 0000:00:10.1
[ 1.529043] xHCI xhci_add_endpoint called for root hub
[ 1.529045] xHCI xhci_check_bandwidth called for root hub
[ 1.529066] hub 3-0:1.0: USB hub found
[ 1.529073] hub 3-0:1.0: 2 ports detected
[ 1.529147] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.529151] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
[ 1.531970] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.531972] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.531974] usb usb4: Product: xHCI Host Controller
[ 1.531976] usb usb4: Manufacturer: Linux 3.11.6-4-xen xhci_hcd
[ 1.531977] usb usb4: SerialNumber: 0000:00:10.1
[ 1.532027] xHCI xhci_add_endpoint called for root hub
[ 1.532029] xHCI xhci_check_bandwidth called for root hub
[ 1.532049] hub 4-0:1.0: USB hub found
[ 1.532074] hub 4-0:1.0: 2 ports detected
[ 1.552404] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.552414] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5
[ 1.552420] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.552435] ehci-pci 0000:00:12.2: debug port 1
[ 1.552509] ehci-pci 0000:00:12.2: irq 17, io mem 0xff74b000
[ 1.564096] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.564123] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.564126] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.564129] usb usb5: Product: EHCI Host Controller
[ 1.564131] usb usb5: Manufacturer: Linux 3.11.6-4-xen ehci_hcd
[ 1.564132] usb usb5: SerialNumber: 0000:00:12.2
[ 1.564288] hub 5-0:1.0: USB hub found
[ 1.564292] hub 5-0:1.0: 5 ports detected
[ 1.564396] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.564409] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
[ 1.564629] xhci_hcd 0000:04:00.0: irq 59 (265) for MSI/MSI-X
[ 1.564706] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.564708] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.564710] usb usb6: Product: xHCI Host Controller
[ 1.564711] usb usb6: Manufacturer: Linux 3.11.6-4-xen xhci_hcd
[ 1.564712] usb usb6: SerialNumber: 0000:04:00.0
[ 1.564794] xHCI xhci_add_endpoint called for root hub
[ 1.564796] xHCI xhci_check_bandwidth called for root hub
[ 1.564820] hub 6-0:1.0: USB hub found
[ 1.564830] hub 6-0:1.0: 4 ports detected
[ 1.564936] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.564939] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7
[ 1.564957] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.564959] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.564960] usb usb7: Product: xHCI Host Controller
[ 1.564961] usb usb7: Manufacturer: Linux 3.11.6-4-xen xhci_hcd
[ 1.564963] usb usb7: SerialNumber: 0000:04:00.0
[ 1.564986] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.565010] xHCI xhci_add_endpoint called for root hub
[ 1.565012] xHCI xhci_check_bandwidth called for root hub
[ 1.565032] hub 7-0:1.0: USB hub found
[ 1.565041] hub 7-0:1.0: 4 ports detected
[ 1.565118] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 8
[ 1.565125] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.565141] ehci-pci 0000:00:13.2: debug port 1
[ 1.565192] ehci-pci 0000:00:13.2: irq 17, io mem 0xff749000
[ 1.576102] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.576131] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.576133] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.576135] usb usb8: Product: EHCI Host Controller
[ 1.576136] usb usb8: Manufacturer: Linux 3.11.6-4-xen ehci_hcd
[ 1.576138] usb usb8: SerialNumber: 0000:00:13.2
[ 1.576337] hub 8-0:1.0: USB hub found
[ 1.576341] hub 8-0:1.0: 5 ports detected
[ 1.576632] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.576640] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 9
[ 1.576698] ohci-pci 0000:00:12.0: irq 18, io mem 0xff74c000
[ 1.636150] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.636154] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.636156] usb usb9: Product: OHCI PCI host controller
[ 1.636157] usb usb9: Manufacturer: Linux 3.11.6-4-xen ohci_hcd
[ 1.636159] usb usb9: SerialNumber: 0000:00:12.0
[ 1.636273] hub 9-0:1.0: USB hub found
[ 1.636279] hub 9-0:1.0: 5 ports detected
[ 1.636509] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.636514] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 10
[ 1.636537] ohci-pci 0000:00:13.0: irq 18, io mem 0xff74a000
[ 1.696151] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.696155] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.696157] usb usb10: Product: OHCI PCI host controller
[ 1.696158] usb usb10: Manufacturer: Linux 3.11.6-4-xen ohci_hcd
[ 1.696160] usb usb10: SerialNumber: 0000:00:13.0
[ 1.696275] hub 10-0:1.0: USB hub found
[ 1.696281] hub 10-0:1.0: 5 ports detected
[ 1.696513] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.696518] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 11
[ 1.696540] ohci-pci 0000:00:14.5: irq 18, io mem 0xff748000
[ 1.756148] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.756152] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.756154] usb usb11: Product: OHCI PCI host controller
[ 1.756155] usb usb11: Manufacturer: Linux 3.11.6-4-xen ohci_hcd
[ 1.756156] usb usb11: SerialNumber: 0000:00:14.5
[ 1.756283] hub 11-0:1.0: USB hub found
[ 1.756289] hub 11-0:1.0: 2 ports detected
[ 1.756843] [drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6819 0x1458:0x2553).
[ 1.756984] [drm] register mmio base: 0xFF600000
[ 1.756986] [drm] register mmio size: 262144
[ 1.757217] ATOM BIOS: GV
[ 1.757284] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 1.757286] radeon 0000:01:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 1.757288] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 1.757289] [drm] RAM width 256bits DDR
[ 1.757352] [TTM] Zone kernel: Available graphics memory: 3542312 kiB
[ 1.757354] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.757355] [TTM] Initializing pool allocator
[ 1.757359] [TTM] Initializing DMA pool allocator
[ 1.757392] [drm] radeon: 2048M of VRAM memory ready
[ 1.757394] [drm] radeon: 512M of GTT memory ready.
[ 1.758505] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.759171] [drm] probing gen 2 caps for device 1022:1412 = 700d02/6
[ 1.759176] [drm] PCIE gen 2 link speeds already enabled
[ 1.766137] [drm] Loading PITCAIRN Microcode
[ 1.988093] usb 6-4: new full-speed USB device number 2 using xhci_hcd
[ 2.062106] usb 6-4: New USB device found, idVendor=045e, idProduct=0291
[ 2.062109] usb 6-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.204178] [drm] PCIE GART of 512M enabled (table at 0x0000000000276000).
[ 2.204334] radeon 0000:01:00.0: WB enabled
[ 2.204337] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88019985cc00
[ 2.204339] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88019985cc04
[ 2.204340] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88019985cc08
[ 2.204342] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88019985cc0c
[ 2.204344] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88019985cc10
[ 2.205311] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90010235a18
[ 2.205313] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.205314] [drm] Driver supports precise vblank timestamp query.
[ 2.205364] radeon 0000:01:00.0: irq 60 (264) for MSI/MSI-X
[ 2.205380] radeon 0000:01:00.0: radeon: using MSI.
[ 2.205416] [drm] radeon: irq initialized.
[ 2.227098] [drm] ring test on 0 succeeded in 3 usecs
[ 2.227105] [drm] ring test on 1 succeeded in 1 usecs
[ 2.227110] [drm] ring test on 2 succeeded in 1 usecs
[ 2.227174] [drm] ring test on 3 succeeded in 2 usecs
[ 2.227184] [drm] ring test on 4 succeeded in 1 usecs
[ 2.415392] [drm] ring test on 5 succeeded in 2 usecs
[ 2.415397] [drm] UVD initialized successfully.
[ 2.423189] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.423257] [drm] ib test on ring 1 succeeded in 0 usecs
[ 2.423319] [drm] ib test on ring 2 succeeded in 0 usecs
[ 2.423351] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.423381] [drm] ib test on ring 4 succeeded in 1 usecs
[ 2.428071] usb 8-4: new high-speed USB device number 2 using ehci-pci
[ 2.580123] [drm] ib test on ring 5 succeeded
[ 2.580831] [drm] Radeon Display Connectors
[ 2.580832] [drm] Connector 0:
[ 2.580834] [drm] DP-1
[ 2.580835] [drm] HPD4
[ 2.580836] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 2.580837] [drm] Encoders:
[ 2.580838] [drm] DFP1: INTERNAL_UNIPHY2
[ 2.580839] [drm] Connector 1:
[ 2.580839] [drm] DP-2
[ 2.580840] [drm] HPD5
[ 2.580841] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 2.580842] [drm] Encoders:
[ 2.580843] [drm] DFP2: INTERNAL_UNIPHY2
[ 2.580844] [drm] Connector 2:
[ 2.580844] [drm] HDMI-A-1
[ 2.580845] [drm] HPD1
[ 2.580846] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 2.580847] [drm] Encoders:
[ 2.580848] [drm] DFP3: INTERNAL_UNIPHY1
[ 2.580848] [drm] Connector 3:
[ 2.580849] [drm] DVI-I-1
[ 2.580850] [drm] HPD6
[ 2.580851] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[ 2.580852] [drm] Encoders:
[ 2.580852] [drm] DFP4: INTERNAL_UNIPHY
[ 2.580853] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.580909] [drm] Internal thermal controller with fan control
[ 2.580948] [drm] radeon: power management initialized
[ 2.639224] [drm] fb mappable at 0xC1388000
[ 2.639227] [drm] vram apper at 0xC0000000
[ 2.639228] [drm] size 8294400
[ 2.639229] [drm] fb depth is 24
[ 2.639230] [drm] pitch is 7680
[ 2.661425] Console: switching to colour frame buffer device 240x67
[ 2.665049] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 2.665051] radeon 0000:01:00.0: registered panic notifier
[ 2.665055] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0
[ 2.709339] usb 8-4: New USB device found, idVendor=048d, idProduct=1336
[ 2.709343] usb 8-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.709345] usb 8-4: Product: Mass Storage Device
[ 2.709346] usb 8-4: Manufacturer: Generic
[ 2.709348] usb 8-4: SerialNumber: 00000000000006
[ 2.777358] xor: measuring software checksum speed
[ 2.816057] 8regs : 16256.000 MB/sec
[ 2.844091] usb 9-3: new low-speed USB device number 2 using ohci-pci
[ 2.856057] 8regs_prefetch: 14534.000 MB/sec
[ 2.896057] 32regs : 13087.000 MB/sec
[ 2.936057] 32regs_prefetch: 10921.000 MB/sec
[ 2.976059] generic_sse: 8077.000 MB/sec
[ 3.013157] usb 9-3: New USB device found, idVendor=09da, idProduct=000a
[ 3.013161] usb 9-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.013163] usb 9-3: Product: PS/2+USB Mouse
[ 3.013164] usb 9-3: Manufacturer: A4Tech
[ 3.016019] prefetch64-sse: 8269.000 MB/sec
[ 3.020331] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:12.0/usb9/9-3/9-3:1.0/input/input0
[ 3.020533] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:12.0-3/input0
[ 3.020553] usbcore: registered new interface driver usbhid
[ 3.020554] usbhid: USB HID core driver
[ 3.056058] avx : 4124.000 MB/sec
[ 3.056060] xor: using function: 8regs (16256.000 MB/sec)
[ 3.124060] raid6: sse2x1 7241 MB/s
[ 3.148094] usb 9-4: new low-speed USB device number 3 using ohci-pci
[ 3.192059] raid6: sse2x2 11335 MB/s
[ 3.260060] raid6: sse2x4 12909 MB/s
[ 3.260061] raid6: using algorithm sse2x4 (12909 MB/s)
[ 3.260062] raid6: using ssse3x2 recovery algorithm
[ 3.263163] bio: create slab <bio-1> at 1
[ 3.263374] Btrfs loaded
[ 3.332156] usb 9-4: New USB device found, idVendor=045e, idProduct=00dd
[ 3.332164] usb 9-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.332166] usb 9-4: Product: Comfort Curve Keyboard 2000
[ 3.332167] usb 9-4: Manufacturer: Microsoft
[ 3.358210] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:12.0/usb9/9-4/9-4:1.0/input/input1
[ 3.358372] hid-generic 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:12.0-4/input0
[ 3.360248] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:12.0/usb9/9-4/9-4:1.1/input/input2
[ 3.360460] hid-generic 0003:045E:00DD.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:12.0-4/input1
[ 5.687397] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 5.985801] EXT4-fs (sdc3): re-mounted. Opts: acl,user_xattr
[ 6.821391] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 6.821446] systemd[1]: Detected virtualization 'xen'.
[ 7.116612] systemd[1]: Inserted module 'autofs4'
[ 7.129329] systemd[1]: Set hostname to <linux-b52d>.
[ 7.549784] device-mapper: uevent: version 1.0.3
[ 7.549855] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 7.550900] LVM: Activation generator successfully completed.
[ 8.537119] systemd[1]: Started Collect Read-Ahead Data.
[ 8.537131] systemd[1]: Started Replay Read-Ahead Data.
[ 8.537139] systemd[1]: Expecting device dev-xvc-1.device...
[ 8.537226] systemd[1]: Expecting device dev-xvc0.device...
[ 8.537283] systemd[1]: Starting System Time Synchronized.
[ 8.537342] systemd[1]: Reached target System Time Synchronized.
[ 8.537350] systemd[1]: Starting Remote File Systems (Pre).
[ 8.537406] systemd[1]: Reached target Remote File Systems (Pre).
[ 8.537413] systemd[1]: Starting Remote File Systems.
[ 8.537467] systemd[1]: Reached target Remote File Systems.
[ 8.537476] systemd[1]: Starting Syslog Socket.
[ 8.537566] systemd[1]: Listening on Syslog Socket.
[ 8.537575] systemd[1]: Starting Delayed Shutdown Socket.
[ 8.537645] systemd[1]: Listening on Delayed Shutdown Socket.
[ 8.537653] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 8.537725] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 8.537737] systemd[1]: Starting Journal Socket.
[ 8.537835] systemd[1]: Listening on Journal Socket.
[ 8.580070] systemd[1]: Starting Load Kernel Modules...
[ 8.581142] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 8.581771] systemd[1]: Mounting Debug File System...
[ 8.582445] systemd[1]: Mounted Huge Pages File System.
[ 8.582494] systemd[1]: Starting Setup Virtual Console...
[ 8.583200] systemd[1]: Starting Create dynamic rule for /dev/root link...
[ 8.583919] systemd[1]: Starting Journal Service...
[ 8.584716] systemd[1]: Started Journal Service.
[ 8.985823] systemd-journald[283]: Vacuuming done, freed 0 bytes
[ 9.269228] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.269258] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 9.269285] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 9.816125] EXT4-fs (sdc3): re-mounted. Opts: acl,user_xattr
[ 9.876484] systemd-udevd[320]: starting version 208
[ 10.805886] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 10.808555] scsi3 : pata_atiixp
[ 10.809055] scsi4 : pata_atiixp
[ 10.809482] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
[ 10.809484] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
[ 10.809974] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.872964] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 10.873031] ACPI: Power Button [PWRB]
[ 10.873068] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 10.873093] ACPI: Power Button [PWRF]
[ 11.238241] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 11.238547] r8169 0000:05:00.0: irq 61 (263) for MSI/MSI-X
[ 11.238694] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000002a000, bc:5f:f4:8b:26:81, XID 0c900800 IRQ 61
[ 11.238696] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 11.290939] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 11.315553] tbs6982fe: module license 'TurboSight Proprietary: www.tbsdtv.com' taints kernel.
[ 11.315557] Disabling lock debugging due to kernel taint
[ 11.372279] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[ 11.396369] 0000:02:07.0: ttyS5 at I/O 0xd060 (irq = 22) is a 16550A
[ 11.654126] usb-storage 8-4:1.0: USB Mass Storage device detected
[ 11.654223] scsi5 : usb-storage 8-4:1.0
[ 11.654287] usbcore: registered new interface driver usb-storage
[ 11.738412] input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:15.2/0000:04:00.0/usb6/6-4/6-4:1.0/input/input6
[ 11.738519] input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:15.2/0000:04:00.0/usb6/6-4/6-4:1.2/input/input7
[ 11.738592] input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:15.2/0000:04:00.0/usb6/6-4/6-4:1.4/input/input8
[ 11.738662] input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:15.2/0000:04:00.0/usb6/6-4/6-4:1.6/input/input9
[ 11.738711] usbcore: registered new interface driver xpad
[ 11.885724] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
[ 12.376096] Registered IR keymap rc-tbs-nec
[ 12.376172] input: saa716x IR (TurboSight TBS 6220) as /devices/pci0000:00/0000:00:15.0/0000:03:00.0/rc/rc0/input10
[ 12.376228] rc0: saa716x IR (TurboSight TBS 6220) as /devices/pci0000:00/0000:00:15.0/0000:03:00.0/rc/rc0
[ 12.376277] DVB: registering new adapter (SAA716x dvb adapter)
[ 12.441715] IR NEC protocol handler initialized
[ 12.454091] tda18212: NXP TDA18212HN successfully identified.
[ 12.454097] DVB: registering adapter 0 frontend 0 (Sony CXD2820R (DVB-T/T2))...
[ 12.466412] ppdev: user-space parallel port driver
[ 12.476231] systemd-udevd[345]: renamed network interface eth0 to enp5s0
[ 12.542218] IR RC5(x) protocol handler initialized
[ 12.597049] IR RC6 protocol handler initialized
[ 12.652792] scsi 5:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
[ 12.652973] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 12.656358] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[ 13.114304] IR JVC protocol handler initialized
[ 13.265170] IR Sony protocol handler initialized
[ 13.480852] ALSA hda_intel.c:3116 0000:01:00.1: Handle VGA-switcheroo audio client
[ 13.480856] ALSA hda_intel.c:3317 0000:01:00.1: Using LPIB position fix
[ 13.480857] ALSA hda_intel.c:3438 0000:01:00.1: Force to non-snoop mode
[ 13.480939] snd_hda_intel 0000:01:00.1: irq 62 (262) for MSI/MSI-X
[ 13.483589] ALSA hda_intel.c:1787 0000:01:00.1: Enable sync_write for stable communication
[ 13.589567] input: MCE IR Keyboard/Mouse (saa716x) as /devices/virtual/input/input11
[ 13.590124] IR MCE Keyboard/mouse protocol handler initialized
[ 13.651069] systemd-journald[283]: Received request to flush runtime journal from PID 1
[ 13.766691] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[ 13.766784] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[ 13.766850] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 13.766905] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 13.766965] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[ 13.767022] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[ 13.857657] lirc_dev: IR Remote Control driver registered, major 250
[ 13.864298] rc rc0: lirc_dev: driver ir-lirc-codec (saa716x) registered at minor = 0
[ 13.864301] IR LIRC bridge handler initialized
[ 14.321642] Adding 1572948k swap on /dev/sdc6. Priority:-1 extents:1 across:1572948k FS
[ 14.735596] type=1400 audit(1391466606.596:2): apparmor="STATUS" operation="profile_load" name="/{usr/,}bin/ping" pid=511 comm="apparmor_parser"
[ 14.759571] type=1400 audit(1391466606.620:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=520 comm="apparmor_parser"
[ 14.777911] type=1400 audit(1391466606.640:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=524 comm="apparmor_parser"
[ 14.801396] type=1400 audit(1391466606.664:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=528 comm="apparmor_parser"
[ 14.850257] type=1400 audit(1391466606.712:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=533 comm="apparmor_parser"
[ 14.850480] type=1400 audit(1391466606.712:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=533 comm="apparmor_parser"
[ 14.850669] type=1400 audit(1391466606.712:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=533 comm="apparmor_parser"
[ 14.850834] type=1400 audit(1391466606.712:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=533 comm="apparmor_parser"
[ 14.869055] type=1400 audit(1391466606.732:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/deliver" pid=537 comm="apparmor_parser"
[ 14.889632] type=1400 audit(1391466606.752:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/dovecot-auth" pid=541 comm="apparmor_parser"
[ 16.196444] xen:evtchn: Event-channel device installed
[ 16.773810] usbcore: registered new interface driver usbback
[ 16.876642] nbd: registered device at major 43
[ 17.184374] Unable to read sysrq code in control/sysrq
[ 19.623853] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 19.623856] vgaarb: transferring owner from PCI:0000:01:00.0 to PCI:0000:00:01.0
[ 21.650144] r8169 0000:05:00.0 enp5s0: link down
[ 21.650190] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 21.650194] r8169 0000:05:00.0 enp5s0: link down
[ 21.791566] NET: Registered protocol family 17
[ 26.477595] r8169 0000:05:00.0 enp5s0: link up
[ 26.477605] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[ 40.947517] Bridge firewalling registered
[ 40.957545] device enp5s0 entered promiscuous mode
[ 40.963106] br0: port 1(enp5s0) entered forwarding state
[ 40.963122] br0: port 1(enp5s0) entered forwarding state
[ 43.017846] Ebtables v2.0 registered
[ 43.086681] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 43.107814] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 340.682827] Bluetooth: Core ver 2.16
[ 340.682851] NET: Registered protocol family 31
[ 340.682852] Bluetooth: HCI device and connection manager initialized
[ 340.682860] Bluetooth: HCI socket layer initialized
[ 340.682862] Bluetooth: L2CAP socket layer initialized
[ 340.682870] Bluetooth: SCO socket layer initialized
[ 340.706972] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 340.706976] Bluetooth: BNEP filters: protocol multicast
[ 340.706984] Bluetooth: BNEP socket layer initialized
[ 343.825435] fuse init (API version 7.22)
[-- Attachment #5: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 46+ messages in thread* Re: HVM crash system on AMD APU A8-6600K
2014-02-03 13:47 HVM crash system on AMD APU A8-6600K Vitaliy Tomin
@ 2014-02-03 13:51 ` Andrew Cooper
2014-02-03 13:58 ` Vitaliy Tomin
0 siblings, 1 reply; 46+ messages in thread
From: Andrew Cooper @ 2014-02-03 13:51 UTC (permalink / raw)
To: Vitaliy Tomin; +Cc: suravee.suthikulpanit, xen-devel, xiantao.zhang, jbeulich
On 03/02/14 13:47, Vitaliy Tomin wrote:
> My system based on AMD APU completely crashes when trying to use HVM
> domUs. I've asked earlier on user list
> http://lists.xen.org/archives/html/xen-users/2013-11/msg00063.html but
> they were recommended to ask here.
> I've also found same problem describer with another AMD APU here
> http://lists.xen.org/archives/html/xen-devel/2013-08/msg01395.html
>
> My system crashes every time I start HVM domU. But if I use xen
> compiled with debug info it works stable at least for hours (not
> tested for longer run).
>
> My system is openSUSE 13.1 with Xen 4.4
> My hardware is
>
> ASRock FM2A75 Pro4
> AMD A8-6600K APU
> Gigabyte Radeon 7850
> 8 Gb DDR3 1600Mhz
>
> I've tested with fresh xen 4.4 and it crash my system as well as stable xen 4.3.
>
> I've setup with pci serial console and capture xen log ( === === lines
> added by myself). Xen and dom0 dmesg logs also attached.
Can you compile Xen with debug=y ? This will turn on all assertions,
which might help narrow down the issue.
Do you have an lspci -tv and -vv for the system?
~Andrew
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: HVM crash system on AMD APU A8-6600K
2014-02-03 13:51 ` Andrew Cooper
@ 2014-02-03 13:58 ` Vitaliy Tomin
2014-02-03 14:08 ` Sander Eikelenboom
2014-02-03 14:09 ` Andrew Cooper
0 siblings, 2 replies; 46+ messages in thread
From: Vitaliy Tomin @ 2014-02-03 13:58 UTC (permalink / raw)
To: xen-devel
[-- Attachment #1: Type: text/plain, Size: 1370 bytes --]
lspci output attached.
I have never managed to crash system with debug=y, but I can provide
serial log captured with debug=y and HVM domain running up.
On Mon, Feb 3, 2014 at 10:51 PM, Andrew Cooper
<andrew.cooper3@citrix.com> wrote:
> On 03/02/14 13:47, Vitaliy Tomin wrote:
>> My system based on AMD APU completely crashes when trying to use HVM
>> domUs. I've asked earlier on user list
>> http://lists.xen.org/archives/html/xen-users/2013-11/msg00063.html but
>> they were recommended to ask here.
>> I've also found same problem describer with another AMD APU here
>> http://lists.xen.org/archives/html/xen-devel/2013-08/msg01395.html
>>
>> My system crashes every time I start HVM domU. But if I use xen
>> compiled with debug info it works stable at least for hours (not
>> tested for longer run).
>>
>> My system is openSUSE 13.1 with Xen 4.4
>> My hardware is
>>
>> ASRock FM2A75 Pro4
>> AMD A8-6600K APU
>> Gigabyte Radeon 7850
>> 8 Gb DDR3 1600Mhz
>>
>> I've tested with fresh xen 4.4 and it crash my system as well as stable xen 4.3.
>>
>> I've setup with pci serial console and capture xen log ( === === lines
>> added by myself). Xen and dom0 dmesg logs also attached.
>
> Can you compile Xen with debug=y ? This will turn on all assertions,
> which might help narrow down the issue.
>
> Do you have an lspci -tv and -vv for the system?
>
> ~Andrew
>
[-- Attachment #2: lspci-tv --]
[-- Type: application/octet-stream, Size: 2528 bytes --]
-[0000:00]-+-00.0 Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
+-00.2 Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) I/O Memory Management Unit
+-01.0 Advanced Micro Devices, Inc. [AMD/ATI] Richland [Radeon HD 8570D]
+-01.1 Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller
+-02.0-[01]--+-00.0 Advanced Micro Devices, Inc. [AMD/ATI] Pitcairn PRO [Radeon HD 7850]
| \-00.1 Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
+-10.0 Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller
+-10.1 Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller
+-11.0 Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
+-12.0 Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller
+-12.2 Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller
+-13.0 Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller
+-13.2 Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller
+-14.0 Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller
+-14.1 Advanced Micro Devices, Inc. [AMD] FCH IDE Controller
+-14.3 Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge
+-14.4-[02]--+-06.0 Creative Labs CA0106 Soundblaster
| \-07.0 MosChip Semiconductor Technology Ltd. PCI 9835 Multi-I/O Controller
+-14.5 Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller
+-15.0-[03]----00.0 Philips Semiconductors SAA7160
+-15.2-[04]----00.0 Etron Technology, Inc. EJ188/EJ198 USB 3.0 Host Controller
+-15.3-[05]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
+-18.0 Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0
+-18.1 Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1
+-18.2 Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2
+-18.3 Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3
+-18.4 Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4
\-18.5 Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5
[-- Attachment #3: lspci-vv --]
[-- Type: application/octet-stream, Size: 44123 bytes --]
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
Subsystem: ASRock Incorporation Device 1410
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) I/O Memory Management Unit
Subsystem: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) I/O Memory Management Unit
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Capabilities: [40] Secure device <?>
Capabilities: [54] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4128
Capabilities: [64] HyperTransport: MSI Mapping Enable+ Fixed+
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Richland [Radeon HD 8570D] (prog-if 00 [VGA controller])
Subsystem: ASRock Incorporation Device 9901
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: Memory at b0000000 (32-bit, prefetchable) [disabled] [size=256M]
Region 1: I/O ports at f000 [size=256]
Region 2: Memory at ff700000 (32-bit, non-prefetchable) [disabled] [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pciback
Kernel modules: radeon
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller
Subsystem: ASRock Incorporation Device 9902
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at ff740000 (32-bit, non-prefetchable) [disabled] [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pciback
Kernel modules: snd_hda_intel
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: ff600000-ff6fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1234
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at ff746000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
Vector table: BAR=0 offset=00001000
PBA: BAR=0 offset=00001080
Capabilities: [a0] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR+, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Latency Tolerance Reporting
Max snoop latency: 0ns
Max no snoop latency: 0ns
Kernel driver in use: xhci_hcd
Kernel modules: xhci_hcd
00:10.1 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at ff744000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
Vector table: BAR=0 offset=00001000
PBA: BAR=0 offset=00001080
Capabilities: [a0] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR+, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Kernel driver in use: xhci_hcd
Kernel modules: xhci_hcd
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: ASRock Incorporation Device 7801
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 44
Region 0: I/O ports at f190 [size=8]
Region 1: I/O ports at f180 [size=4]
Region 2: I/O ports at f170 [size=8]
Region 3: I/O ports at f160 [size=4]
Region 4: I/O ports at f150 [size=16]
Region 5: Memory at ff74d000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [50] MSI: Enable+ Count=4/4 Maskable- 64bit+
Address: 00000000fee0800c Data: 4000
Capabilities: [70] SATA HBA v1.0 InCfgSpace
Kernel driver in use: ahci
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device 7807
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at ff74c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device 7808
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at ff74b000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device 7807
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at ff74a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device 7808
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at ff749000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14)
Subsystem: ASRock Incorporation Device 780b
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller (prog-if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation Device 780c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at f100 [size=16]
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp, pata_acpi, ata_generic
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
Subsystem: ASRock Incorporation Device 780e
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device 7809
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at ff748000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: ff500000-ff5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD] Device 0000
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: ff400000-ff4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD] Device 0000
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:15.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD] Device 0000
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Pitcairn PRO [Radeon HD 7850] (prog-if 00 [VGA controller])
Subsystem: Gigabyte Technology Co., Ltd Device 2553
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 60
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at ff600000 (64-bit, non-prefetchable) [size=256K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at ff640000 [disabled] [size=128K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0400c Data: 4000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [270 v1] #19
Capabilities: [2b0 v1] Address Translation Service (ATS)
ATSCap: Invalidate Queue Depth: 00
ATSCtl: Enable-, Smallest Translation Unit: 00
Capabilities: [2c0 v1] #13
Capabilities: [2d0 v1] #1b
Kernel driver in use: radeon
Kernel modules: radeon
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
Subsystem: Gigabyte Technology Co., Ltd Device aab0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 62
Region 0: Memory at ff660000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0200c Data: 4000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:06.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster
Subsystem: Creative Labs SB0570 [SB Audigy SE]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at d000 [size=32]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: snd_ca0106
Kernel modules: snd_ca0106
02:07.0 Serial controller: MosChip Semiconductor Technology Ltd. PCI 9835 Multi-I/O Controller (rev 01) (prog-if 02 [16550])
Subsystem: LSI Logic / Symbios Logic 2S (16C550 UART)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at d070 [size=8]
Region 1: I/O ports at d060 [size=8]
Region 2: I/O ports at d050 [size=8]
Region 3: I/O ports at d040 [size=8]
Region 4: I/O ports at d030 [size=8]
Region 5: I/O ports at d020 [size=16]
Kernel driver in use: serial
Kernel modules: 8250_pci, parport_serial
03:00.0 Multimedia controller: Philips Semiconductors SAA7160 (rev 03)
Subsystem: Device 6220:0002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ff500000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [40] MSI: Enable- Count=1/32 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [50] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [74] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Vendor Specific Information: Len=50 <?>
Capabilities: [100 v1] Vendor Specific Information: ID=0000 Rev=0 Len=088 <?>
Kernel driver in use: SAA716x TBS
Kernel modules: saa716x_tbs_dvb
04:00.0 USB controller: Etron Technology, Inc. EJ188/EJ198 USB 3.0 Host Controller (prog-if 30 [XHCI])
Subsystem: ASRock Incorporation Device 7052
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 59
Region 0: Memory at ff400000 (64-bit, non-prefetchable) [size=32K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] MSI: Enable+ Count=1/4 Maskable+ 64bit+
Address: 00000000fee0100c Data: 4000
Masking: 0000000e Pending: 00000000
Capabilities: [a0] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [190 v1] Device Serial Number 01-01-01-01-01-01-01-01
Kernel driver in use: xhci_hcd
Kernel modules: xhci_hcd
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
Subsystem: ASRock Incorporation Motherboard (one of many)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 61
Region 0: I/O ports at c000 [size=256]
Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0400c Data: 4000
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
No end tag found
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
Kernel modules: r8169
[-- Attachment #4: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 46+ messages in thread* Re: HVM crash system on AMD APU A8-6600K
2014-02-03 13:58 ` Vitaliy Tomin
@ 2014-02-03 14:08 ` Sander Eikelenboom
2014-02-03 14:09 ` Andrew Cooper
1 sibling, 0 replies; 46+ messages in thread
From: Sander Eikelenboom @ 2014-02-03 14:08 UTC (permalink / raw)
To: Vitaliy Tomin; +Cc: xen-devel
Monday, February 3, 2014, 2:58:37 PM, you wrote:
> lspci output attached.
> I have never managed to crash system with debug=y, but I can provide
> serial log captured with debug=y and HVM domain running up.
Does it start with debug=n, but without trying to passthrough the pci device (the graphics core of the apu?) to the hvm ?
> On Mon, Feb 3, 2014 at 10:51 PM, Andrew Cooper
> <andrew.cooper3@citrix.com> wrote:
>> On 03/02/14 13:47, Vitaliy Tomin wrote:
>>> My system based on AMD APU completely crashes when trying to use HVM
>>> domUs. I've asked earlier on user list
>>> http://lists.xen.org/archives/html/xen-users/2013-11/msg00063.html but
>>> they were recommended to ask here.
>>> I've also found same problem describer with another AMD APU here
>>> http://lists.xen.org/archives/html/xen-devel/2013-08/msg01395.html
>>>
>>> My system crashes every time I start HVM domU. But if I use xen
>>> compiled with debug info it works stable at least for hours (not
>>> tested for longer run).
>>>
>>> My system is openSUSE 13.1 with Xen 4.4
>>> My hardware is
>>>
>>> ASRock FM2A75 Pro4
>>> AMD A8-6600K APU
>>> Gigabyte Radeon 7850
>>> 8 Gb DDR3 1600Mhz
>>>
>>> I've tested with fresh xen 4.4 and it crash my system as well as stable xen 4.3.
>>>
>>> I've setup with pci serial console and capture xen log ( === === lines
>>> added by myself). Xen and dom0 dmesg logs also attached.
>>
>> Can you compile Xen with debug=y ? This will turn on all assertions,
>> which might help narrow down the issue.
>>
>> Do you have an lspci -tv and -vv for the system?
>>
>> ~Andrew
>>
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: HVM crash system on AMD APU A8-6600K
2014-02-03 13:58 ` Vitaliy Tomin
2014-02-03 14:08 ` Sander Eikelenboom
@ 2014-02-03 14:09 ` Andrew Cooper
[not found] ` <CABPT1LscUZR_V1TOAzVmkvSms0M_Yucjp8WtUaeOADD_G-EbHA@mail.gmail.com>
1 sibling, 1 reply; 46+ messages in thread
From: Andrew Cooper @ 2014-02-03 14:09 UTC (permalink / raw)
To: Vitaliy Tomin; +Cc: xen-devel, Jan Beulich, SuraveeSuthikulpanit
On 03/02/14 13:58, Vitaliy Tomin wrote:
> lspci output attached.
>
> I have never managed to crash system with debug=y, but I can provide
> serial log captured with debug=y and HVM domain running up.
That is a curious data point - it would imply that debug mode is doing
something which non-debug mode fails to do.
Could you provide the log please?
Can you explain "=== whole system crashed ===" a little more.
Given the lack of stack trace or any hint of a problem from Xen, is it a
system hang? Does adding "watchdog" to the Xen command line cause the
failure to change?
Looking back at the debug=n serial log in combination with the PCI topology,
(XEN) AMD-Vi: No iommu for device 0000:00:00.2
(XEN) setup 0000:00:00.2 for d0 failed (-19)
Device 00:00.2 is the IOMMU itself. I would have thought applying IOMMU
translation to the IOMMU is going to end in tears. Suravee; Can you
comment about this? is the IOMMU expected to have an IVRS entry?
~Andrew
^ permalink raw reply [flat|nested] 46+ messages in thread
* HVM crash system on AMD APU A8-6600K
@ 2013-11-02 9:51 Vitaliy Tomin
2014-04-02 14:44 ` George Dunlap
0 siblings, 1 reply; 46+ messages in thread
From: Vitaliy Tomin @ 2013-11-02 9:51 UTC (permalink / raw)
To: xen-devel
[-- Attachment #1: Type: text/plain, Size: 551 bytes --]
I have same problem described in earlier thread:
http://lists.xen.org/archives/html/xen-devel/2013-08/msg01395.html
Trying to start HVM domain leads to dom0 crash (simple cold reboot).
My system is openSUSE 13.1 RC2 with Xen 4.3.0
My hardware is
ASRock FM2A75 Pro4
AMD A8-6600K APU
Gigabyte Radeon 7850
8 Gb DDR3 1600Mhz
I have setup serial console and could provide logs your requested.
Attached logs from xl dmesg, dom0 dmesg and serial console with:
loglvl=all iommu=debug,verbose apic_verbosity=debug cpuinfo
console=com1 com1=115200,8n1,pci
[-- Attachment #2: xen-serial-crash2.log --]
[-- Type: text/plain, Size: 43482 bytes --]
__ __ _ _ _____ ___ _ _ _ _ ____
\ \/ /___ _ __ | || | |___ / / _ \ / | || | / | |___ \
\ // _ \ '_ \ | || |_ |_ \| | | | | | || |_ __| | __) |
/ \ __/ | | | |__ _| ___) | |_| | | |__ _|__| |_ / __/
/_/\_\___|_| |_| |_|(_)____(_)___/___|_| |_| |_(_)_____|
|_____|
(XEN) Xen version 4.3.0_14-1.2 (abuild@) (gcc (SUSE Linux) 4.8.1 20130909 [gcc-4_8-branch revision 202388]) debug=n Fri Oct 23
(XEN) Latest ChangeSet: 27204
(XEN) Bootloader: GRUB2 2.00
(XEN) Command line: loglvl=all iommu=debug,verbose apic_verbosity=debug cpuinfo console=com1 com1=115200,8n1,pci
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 3 MBR signatures
(XEN) Found 4 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009e800 (usable)
(XEN) 000000000009e800 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000008d68b000 (usable)
(XEN) 000000008d68b000 - 000000008dd0a000 (reserved)
(XEN) 000000008dd0a000 - 000000008e05a000 (ACPI NVS)
(XEN) 000000008e05a000 - 000000008ea45000 (reserved)
(XEN) 000000008ea45000 - 000000008ea46000 (usable)
(XEN) 000000008ea46000 - 000000008ec4c000 (ACPI NVS)
(XEN) 000000008ec4c000 - 000000008f064000 (usable)
(XEN) 000000008f064000 - 000000008f7f3000 (reserved)
(XEN) 000000008f7f3000 - 000000008f800000 (usable)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fec10000 - 00000000fec11000 (reserved)
(XEN) 00000000fed00000 - 00000000fed01000 (reserved)
(XEN) 00000000fed80000 - 00000000fed90000 (reserved)
(XEN) 00000000ff800000 - 0000000100000000 (reserved)
(XEN) 0000000100001000 - 0000000250000000 (usable)
(XEN) ACPI: RSDP 000F0490, 0024 (r2 ALASKA)
(XEN) ACPI: XSDT 8E04A078, 0074 (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FACP 8E050128, 00F4 (r4 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI Warning (tbfadt-0464): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126]
(XEN) ACPI: DSDT 8E04A188, 5F9E (r2 ALASKA A M I 0 INTL 20051117)
(XEN) ACPI: FACS 8E052E80, 0040
(XEN) ACPI: APIC 8E050220, 0072 (r3 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FPDT 8E050298, 0044 (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: MCFG 8E0502E0, 003C (r1 ALASKA A M I 1072009 MSFT 10013)
(XEN) ACPI: AAFT 8E050320, 00E7 (r1 ALASKA OEMAAFT 1072009 MSFT 97)
(XEN) ACPI: HPET 8E050408, 0038 (r1 ALASKA A M I 1072009 AMI 5)
(XEN) ACPI: IVRS 8E050440, 0070 (r2 AMD ANNAPURN 1 AMD 0)
(XEN) ACPI: SSDT 8E0504B0, 0A60 (r1 AMD ANNAPURN 1 AMD 1)
(XEN) ACPI: SSDT 8E050F10, 04B7 (r2 AMD ANNAPURN 1 MSFT 4000000)
(XEN) ACPI: CRAT 8E0513C8, 02F8 (r1 AMD ANNAPURN 1 AMD 1)
(XEN) System RAM: 7642MB (7825720kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000250000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fd900
(XEN) DMI 2.7 present.
(XEN) APIC boot state is 'xapic'
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: 32/64X FACS address mismatch in FADT - 8e052e80/0000000000000000, using 32
(XEN) ACPI: wakeup_vec[8e052e8c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
(XEN) Processor #16 5:3 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
(XEN) Processor #17 5:3 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
(XEN) Processor #18 5:3 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
(XEN) Processor #19 5:3 APIC version 16
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x10228210 base: 0xfed00000
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs)
(XEN) mapped APIC to ffff82c3ffdfb000 (fee00000)
(XEN) mapped IOAPIC to ffff82c3ffdfa000 (fec00000)
(XEN) IRQ limits: 24 GSI, 760 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 3893.049 MHz processor.
(XEN) Initing memory sharing.
(XEN) CPU: L1 I cache 64K (64 bytes/line), D cache 16K (64 bytes/line)
(XEN) CPU: L2 Cache: 2048K (64 bytes/line)
(XEN) CPU 0(4) -> Processor 0, Compute Unit 0
(XEN) xstate_init: using cntxt_size: 0x3c0 and states: 0x4000000000000007
(XEN) AMD Fam15h machine check reporting enabled
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - ff
(XEN) PCI: Not using MCFG for segment 0000 bus 00-ff
(XEN) AMD-Vi: Found MSI capability block at 0x54
(XEN) AMD-Vi: ACPI Table:
(XEN) AMD-Vi: Signature IVRS
(XEN) AMD-Vi: Length 0x70
(XEN) AMD-Vi: Revision 0x2
(XEN) AMD-Vi: CheckSum 0xe8
(XEN) AMD-Vi: OEM_Id AMD
(XEN) AMD-Vi: OEM_Table_Id ANNAPURN
(XEN) AMD-Vi: OEM_Revision 0x1
(XEN) AMD-Vi: Creator_Id AMD
(XEN) AMD-Vi: Creator_Revision 0
(XEN) AMD-Vi: IVRS Block: type 0x10 flags 0xfe len 0x40 id 0x2
(XEN) AMD-Vi: IVHD Device Entry: type 0x3 id 0x8 flags 0
(XEN) AMD-Vi: Dev_Id Range: 0x8 -> 0xfffe
(XEN) AMD-Vi: IVHD Device Entry: type 0x43 id 0x200 flags 0
(XEN) AMD-Vi: Dev_Id Range: 0x200 -> 0x2ff alias 0xa4
(XEN) AMD-Vi: IVHD Device Entry: type 0 id 0 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x48 id 0 flags 0
(XEN) AMD-Vi: IVHD Special: 0000:00:14.0 variety 0x2 handle 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x48 id 0 flags 0xd7
(XEN) AMD-Vi: IVHD Special: 0000:00:14.0 variety 0x1 handle 0x5
(XEN) AMD-Vi: IOMMU Extended Features:
(XEN) - Prefetch Pages Command
(XEN) - Peripheral Page Service Request
(XEN) - Guest Translation
(XEN) - Invalidate All Command
(XEN) AMD-Vi: PPR Log Enabled.
(XEN) AMD-Vi: Guest Translation Enabled.
(XEN) AMD-Vi: IOMMU 0 Enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) CPU0: AMD A8-6600K APU with Radeon(tm) HD Graphics stepping 01
(XEN) Getting VERSION: 80050010
(XEN) Getting VERSION: 80050010
(XEN) Getting ID: 10000000
(XEN) Getting LVT0: 700
(XEN) Getting LVT1: 400
(XEN) enabled ExtINT on CPU#0
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 5-0, 5-16, 5-17, 5-18, 5-19, 5-20, 5-21, 5-22, 5-23 not connected.
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) number of MP IRQ sources: 15.
(XEN) number of IO-APIC #5 registers: 24.
(XEN) testing the IO APIC.......................
(XEN) IO APIC #5......
(XEN) .... register #00: 05000000
(XEN) ....... : physical APIC id: 05
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178021
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0021
(XEN) .... register #02: 05000000
(XEN) ....... : arbitration: 05
(XEN) .... register #03: 05018021
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 1 30
(XEN) 01 001 01 0 0 0 0 0 1 1 30
(XEN) 02 001 01 0 0 0 0 0 1 1 F0
(XEN) 03 001 01 0 0 0 0 0 1 1 38
(XEN) 04 001 01 0 0 0 0 0 1 1 40
(XEN) 05 001 01 0 0 0 0 0 1 1 48
(XEN) 06 001 01 0 0 0 0 0 1 1 50
(XEN) 07 001 01 0 0 0 0 0 1 1 58
(XEN) 08 001 01 0 0 0 0 0 1 1 60
(XEN) 09 001 01 1 1 0 1 0 1 0 00
(XEN) 0a 001 01 0 0 0 0 0 1 1 F1
(XEN) 0b 001 01 0 0 0 0 0 1 1 70
(XEN) 0c 001 01 0 0 0 0 0 1 1 78
(XEN) 0d 001 01 0 0 0 0 0 1 1 88
(XEN) 0e 001 01 0 0 0 0 0 1 1 90
(XEN) 0f 001 01 0 0 0 0 0 1 1 98
(XEN) 10 000 00 1 0 0 0 0 0 1 30
(XEN) 11 000 00 1 0 0 0 0 0 1 30
(XEN) 12 000 00 1 0 0 0 0 0 1 30
(XEN) 13 000 00 1 0 0 0 0 0 1 30
(XEN) 14 000 00 1 0 0 0 0 0 1 30
(XEN) 15 000 00 1 0 0 0 0 0 1 30
(XEN) 16 000 00 1 0 0 0 0 0 1 30
(XEN) 17 000 00 1 0 0 0 0 0 1 30
(XEN) Using vector-based indexing
(XEN) IRQ to pin mappings:
(XEN) IRQ240 -> 0:2
(XEN) IRQ48 -> 0:1
(XEN) IRQ56 -> 0:3
(XEN) IRQ64 -> 0:4
(XEN) IRQ72 -> 0:5
(XEN) IRQ80 -> 0:6
(XEN) IRQ88 -> 0:7
(XEN) IRQ96 -> 0:8
(XEN) IRQ104 -> 0:9
(XEN) IRQ241 -> 0:10
(XEN) IRQ112 -> 0:11
(XEN) IRQ120 -> 0:12
(XEN) IRQ136 -> 0:13
(XEN) IRQ144 -> 0:14
(XEN) IRQ152 -> 0:15
(XEN) .................................... done.
(XEN) Using local APIC timer interrupts.
(XEN) calibrating APIC timer ...
(XEN) ..... CPU clock speed is 3893.0032 MHz.
(XEN) ..... host bus clock speed is 99.8205 MHz.
(XEN) ..... bus_scale = 0x6639
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 32 KiB.
(XEN) HVM: ASIDs enabled.
(XEN) SVM: Supported advanced features:
(XEN) - Nested Page Tables (NPT)
(XEN) - Last Branch Record (LBR) Virtualisation
(XEN) - Next-RIP Saved on #VMEXIT
(XEN) - VMCB Clean Bits
(XEN) - DecodeAssists
(XEN) - Pause-Intercept Filter
(XEN) - TSC Rate MSR
(XEN) HVM: SVM enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) Booting processor 1/17 eip 8e000
(XEN) Initializing CPU#1
(XEN) masked ExtINT on CPU#1
(XEN) CPU: L1 I cache 64K (64 bytes/line), D cache 16K (64 bytes/line)
(XEN) CPU: L2 Cache: 2048K (64 bytes/line)
(XEN) CPU 1(4) -> Processor 0, Compute Unit 0
(XEN) CPU1: AMD A8-6600K APU with Radeon(tm) HD Graphics stepping 01
(XEN) microcode: CPU1 collect_cpu_info: patch_id=0x6001119
(XEN) Booting processor 2/18 eip 8e000
(XEN) Initializing CPU#2
(XEN) masked ExtINT on CPU#2
(XEN) CPU: L1 I cache 64K (64 bytes/line), D cache 16K (64 bytes/line)
(XEN) CPU: L2 Cache: 2048K (64 bytes/line)
(XEN) CPU 2(4) -> Processor 0, Compute Unit 1
(XEN) CPU2: AMD A8-6600K APU with Radeon(tm) HD Graphics stepping 01
(XEN) microcode: CPU2 collect_cpu_info: patch_id=0
(XEN) Booting processor 3/19 eip 8e000
(XEN) Initializing CPU#3
(XEN) masked ExtINT on CPU#3
(XEN) CPU: L1 I cache 64K (64 bytes/line), D cache 16K (64 bytes/line)
(XEN) CPU: L2 Cache: 2048K (64 bytes/line)
(XEN) CPU 3(4) -> Processor 0, Compute Unit 1
(XEN) CPU3: AMD A8-6600K APU with Radeon(tm) HD Graphics stepping 01
(XEN) microcode: CPU3 collect_cpu_info: patch_id=0
(XEN) Brought up 4 CPUs
(XEN) ACPI sleep modes: S3
(XEN) MCA: Use hw thresholding to adjust polling frequency
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) mtrr: your CPUs had inconsistent variable MTRR settings
(XEN) mtrr: probably your BIOS does not setup all CPUs.
(XEN) mtrr: corrected configuration.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0x2000 -> 0xc05000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000224000000->0000000225000000 (1743526 pages to be allocated)
(XEN) Init. ramdisk: 000000024d4e4000->0000000250000000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80002000->ffffffff80c05000
(XEN) Init. ramdisk: 0000000000000000->0000000000000000
(XEN) Phys-Mach map: ffffea0000000000->ffffea0000d6ae10
(XEN) Start info: ffffffff80c05000->ffffffff80c054b4
(XEN) Page tables: ffffffff80c06000->ffffffff80c11000
(XEN) Boot stack: ffffffff80c11000->ffffffff80c12000
(XEN) TOTAL: ffffffff80000000->ffffffff81000000
(XEN) ENTRY ADDRESS: ffffffff80002000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) AMD-Vi: No iommu for device 0000:00:00.0
(XEN) setup 0000:00:00.0 for d0 failed (-19)
(XEN) AMD-Vi: No iommu for device 0000:00:00.2
(XEN) setup 0000:00:00.2 for d0 failed (-19)
(XEN) AMD-Vi: Setup I/O page table: device id = 0x8, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x9, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x10, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x80, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x81, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x88, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x90, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x92, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x98, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x9a, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xa0, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xa1, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xa3, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xa4, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xa5, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xa8, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xaa, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xab, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xc0, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xc1, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xc2, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xc3, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xc4, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0xc5, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x100, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x101, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x230, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x238, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x300, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x400, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) AMD-Vi: Setup I/O page table: device id = 0x500, root table = 0x225735000, domain = 0, paging mode = 3
(XEN) Scrubbing Free RAM: .done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 256kB init memory.
(XEN) traps.c:2527:d0 Domain attempted WRMSR 0000000000000413 from 0xc008000001000000 to 0x8008000001000000.
(XEN) traps.c:2527:d0 Domain attempted WRMSR 0000000000000413 from 0xc008000001000000 to 0x8008000001000000.
(XEN) traps.c:2527:d0 Domain attempted WRMSR 0000000000000413 from 0xc008000001000000 to 0x8008000001000000.
(XEN) traps.c:2527:d0 Domain attempted WRMSR 0000000000000413 from 0xc008000001000000 to 0x8008000001000000.
(XEN) PCI: Using MCFG for segment 0000 bus 00-ff
(XEN) mm.c:809: d0: Forcing read-only access to MFN e0002
(XEN) PCI add device 0000:00:00.0
(XEN) PCI add device 0000:00:00.2
(XEN) PCI add device 0000:00:01.0
(XEN) PCI add device 0000:00:01.1
(XEN) PCI add device 0000:00:02.0
(XEN) PCI add device 0000:00:10.0
(XEN) PCI add device 0000:00:10.1
(XEN) SR-IOV device 0000:00:11.0 has its virtual functions already enabled (01ab)
(XEN) PCI add device 0000:00:11.0
(XEN) PCI add device 0000:00:12.0
(XEN) PCI add device 0000:00:12.2
(XEN) PCI add device 0000:00:13.0
(XEN) PCI add device 0000:00:13.2
(XEN) PCI add device 0000:00:14.0
(XEN) PCI add device 0000:00:14.1
(XEN) PCI add device 0000:00:14.3
(XEN) PCI add device 0000:00:14.4
(XEN) PCI add device 0000:00:14.5
(XEN) PCI add device 0000:00:15.0
(XEN) PCI add device 0000:00:15.2
(XEN) PCI add device 0000:00:15.3
(XEN) PCI add device 0000:00:18.0
(XEN) PCI add device 0000:00:18.1
(XEN) PCI add device 0000:00:18.2
(XEN) PCI add device 0000:00:18.3
(XEN) PCI add device 0000:00:18.4
(XEN) PCI add device 0000:00:18.5
(XEN) PCI add device 0000:01:00.0
(XEN) PCI add device 0000:01:00.1
(XEN) PCI add device 0000:02:06.0
(XEN) PCI add device 0000:02:07.0
(XEN) PCI add device 0000:03:00.0
(XEN) PCI add device 0000:04:00.0
(XEN) PCI add device 0000:05:00.0
(XEN) IOAPIC[0]: Set PCI routing entry (5-16 -> 0xa0 -> IRQ 16 Mode:1 Active:1)
(XEN) IOAPIC[0]: Set PCI routing entry (5-17 -> 0xa8 -> IRQ 17 Mode:1 Active:1)
(XEN) IOAPIC[0]: Set PCI routing entry (5-18 -> 0xb0 -> IRQ 18 Mode:1 Active:1)
(XEN) IOAPIC[0]: Set PCI routing entry (5-19 -> 0xb8 -> IRQ 19 Mode:1 Active:1)
(XEN) IOAPIC[0]: Set PCI routing entry (5-21 -> 0xc0 -> IRQ 21 Mode:1 Active:1)
(XEN) IOAPIC[0]: Set PCI routing entry (5-22 -> 0xc8 -> IRQ 22 Mode:1 Active:1)
(XEN) physdev.c:161: dom0: wrong map_pirq type 4
(XEN) physdev.c:161: dom0: wrong map_pirq type 4
[ 16.908989] Unable to read sysrq code in control/sysrq
(XEN) APIC error on CPU0: 00(40)
(XEN) APIC error on CPU3: 00(40)
(XEN) APIC error on CPU1: 00(40)
(XEN) APIC error on CPU2: 00(40)
Welcome to openSUSE 13.1 "Bottle" - Kernel 3.11.6-3-xen (xvc0).
linux-b52d login: (XEN) AMD-Vi: Share p2m table with iommu: p2m table = 0x100077
===== machine created ===
(XEN) AMD-Vi: Share p2m table with iommu: p2m table = 0x1c566c
==== crash ===
[-- Attachment #3: xl-dmesg.log --]
[-- Type: text/plain, Size: 6422 bytes --]
__ __ _ _ _____ ___ _ _ _ _ ____
\ \/ /___ _ __ | || | |___ / / _ \ / | || | / | |___ \
\ // _ \ '_ \ | || |_ |_ \| | | | | | || |_ __| | __) |
/ \ __/ | | | |__ _| ___) | |_| | | |__ _|__| |_ / __/
/_/\_\___|_| |_| |_|(_)____(_)___/___|_| |_| |_(_)_____|
|_____|
(XEN) Xen version 4.3.0_14-1.2 (abuild@) (gcc (SUSE Linux) 4.8.1 20130909 [gcc-4_8-branch revision 202388]) debug=n Fri Oct 25 22:36:34 UTC 2013
(XEN) Latest ChangeSet: 27204
(XEN) Bootloader: GRUB2 2.00
(XEN) Command line:
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 3 MBR signatures
(XEN) Found 4 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009e800 (usable)
(XEN) 000000000009e800 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000008d68b000 (usable)
(XEN) 000000008d68b000 - 000000008dd0a000 (reserved)
(XEN) 000000008dd0a000 - 000000008e05a000 (ACPI NVS)
(XEN) 000000008e05a000 - 000000008ea45000 (reserved)
(XEN) 000000008ea45000 - 000000008ea46000 (usable)
(XEN) 000000008ea46000 - 000000008ec4c000 (ACPI NVS)
(XEN) 000000008ec4c000 - 000000008f064000 (usable)
(XEN) 000000008f064000 - 000000008f7f3000 (reserved)
(XEN) 000000008f7f3000 - 000000008f800000 (usable)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fec10000 - 00000000fec11000 (reserved)
(XEN) 00000000fed00000 - 00000000fed01000 (reserved)
(XEN) 00000000fed80000 - 00000000fed90000 (reserved)
(XEN) 00000000ff800000 - 0000000100000000 (reserved)
(XEN) 0000000100001000 - 0000000250000000 (usable)
(XEN) ACPI: RSDP 000F0490, 0024 (r2 ALASKA)
(XEN) ACPI: XSDT 8E04A078, 0074 (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FACP 8E050128, 00F4 (r4 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI Warning (tbfadt-0464): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126]
(XEN) ACPI: DSDT 8E04A188, 5F9E (r2 ALASKA A M I 0 INTL 20051117)
(XEN) ACPI: FACS 8E052E80, 0040
(XEN) ACPI: APIC 8E050220, 0072 (r3 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FPDT 8E050298, 0044 (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: MCFG 8E0502E0, 003C (r1 ALASKA A M I 1072009 MSFT 10013)
(XEN) ACPI: AAFT 8E050320, 00E7 (r1 ALASKA OEMAAFT 1072009 MSFT 97)
(XEN) ACPI: HPET 8E050408, 0038 (r1 ALASKA A M I 1072009 AMI 5)
(XEN) ACPI: IVRS 8E050440, 0070 (r2 AMD ANNAPURN 1 AMD 0)
(XEN) ACPI: SSDT 8E0504B0, 0A60 (r1 AMD ANNAPURN 1 AMD 1)
(XEN) ACPI: SSDT 8E050F10, 04B7 (r2 AMD ANNAPURN 1 MSFT 4000000)
(XEN) ACPI: CRAT 8E0513C8, 02F8 (r1 AMD ANNAPURN 1 AMD 1)
(XEN) System RAM: 7642MB (7825720kB)
(XEN) Domain heap initialised
(XEN) ACPI: 32/64X FACS address mismatch in FADT - 8e052e80/0000000000000000, using 32
(XEN) Processor #16 5:3 APIC version 16
(XEN) Processor #17 5:3 APIC version 16
(XEN) Processor #18 5:3 APIC version 16
(XEN) Processor #19 5:3 APIC version 16
(XEN) IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3893.011 MHz processor.
(XEN) Initing memory sharing.
(XEN) xstate_init: using cntxt_size: 0x3c0 and states: 0x4000000000000007
(XEN) PCI: Not using MCFG for segment 0000 bus 00-ff
(XEN) AMD-Vi: IOMMU Extended Features:
(XEN) - Prefetch Pages Command
(XEN) - Peripheral Page Service Request
(XEN) - Guest Translation
(XEN) - Invalidate All Command
(XEN) AMD-Vi: IOMMU 0 Enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 16 KiB.
(XEN) HVM: ASIDs enabled.
(XEN) SVM: Supported advanced features:
(XEN) - Nested Page Tables (NPT)
(XEN) - Last Branch Record (LBR) Virtualisation
(XEN) - Next-RIP Saved on #VMEXIT
(XEN) - VMCB Clean Bits
(XEN) - DecodeAssists
(XEN) - Pause-Intercept Filter
(XEN) - TSC Rate MSR
(XEN) HVM: SVM enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) Brought up 4 CPUs
(XEN) mtrr: your CPUs had inconsistent variable MTRR settings
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0x2000 -> 0xc05000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000224000000->0000000225000000 (1743534 pages to be allocated)
(XEN) Init. ramdisk: 000000024d4e4000->0000000250000000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80002000->ffffffff80c05000
(XEN) Init. ramdisk: 0000000000000000->0000000000000000
(XEN) Phys-Mach map: ffffea0000000000->ffffea0000d6ae50
(XEN) Start info: ffffffff80c05000->ffffffff80c054b4
(XEN) Page tables: ffffffff80c06000->ffffffff80c11000
(XEN) Boot stack: ffffffff80c11000->ffffffff80c12000
(XEN) TOTAL: ffffffff80000000->ffffffff81000000
(XEN) ENTRY ADDRESS: ffffffff80002000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) setup 0000:00:00.0 for d0 failed (-19)
(XEN) setup 0000:00:00.2 for d0 failed (-19)
(XEN) Scrubbing Free RAM: .done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 256kB init memory.
(XEN) traps.c:2527:d0 Domain attempted WRMSR 0000000000000413 from 0xc008000001000000 to 0x8008000001000000.
(XEN) traps.c:2527:d0 Domain attempted WRMSR 0000000000000413 from 0xc008000001000000 to 0x8008000001000000.
(XEN) traps.c:2527:d0 Domain attempted WRMSR 0000000000000413 from 0xc008000001000000 to 0x8008000001000000.
(XEN) traps.c:2527:d0 Domain attempted WRMSR 0000000000000413 from 0xc008000001000000 to 0x8008000001000000.
(XEN) mm.c:809: d0: Forcing read-only access to MFN e0002
(XEN) SR-IOV device 0000:00:11.0 has its virtual functions already enabled (01ab)
(XEN) physdev.c:161: dom0: wrong map_pirq type 4
[-- Attachment #4: dom0-dmesg.log --]
[-- Type: text/plain, Size: 62411 bytes --]
[ 0.000000] BRK [0x00add000, 0x00addfff] PUD
[ 0.000000] BRK [0x00ade000, 0x00adefff] PMD
[ 0.000000] BRK [0x00adf000, 0x00ae5fff] PTE
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.6-3-xen (geeko@buildhost) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #1 SMP Thu Oct 24 16:23:02 UTC 2013 (0ba01b7)
[ 0.000000] Command line: root=UUID=7cac86d2-796d-4fff-926e-c6d65219b54c ro quiet quiet resume=/dev/disk/by-id/ata-ST3320620AS_5QF5DRMP-part6 splash=silent quiet showopts
[ 0.000000] Xen-provided machine memory map:
[ 0.000000] BIOS: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS: [mem 0x0000000000100000-0x000000008d68afff] usable
[ 0.000000] BIOS: [mem 0x000000008d68b000-0x000000008dd09fff] reserved
[ 0.000000] BIOS: [mem 0x000000008dd0a000-0x000000008e059fff] ACPI NVS
[ 0.000000] BIOS: [mem 0x000000008e05a000-0x000000008ea44fff] reserved
[ 0.000000] BIOS: [mem 0x000000008ea45000-0x000000008ea45fff] usable
[ 0.000000] BIOS: [mem 0x000000008ea46000-0x000000008ec4bfff] ACPI NVS
[ 0.000000] BIOS: [mem 0x000000008ec4c000-0x000000008f063fff] usable
[ 0.000000] BIOS: [mem 0x000000008f064000-0x000000008f7f2fff] reserved
[ 0.000000] BIOS: [mem 0x000000008f7f3000-0x000000008f7fffff] usable
[ 0.000000] BIOS: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS: [mem 0x0000000100001000-0x000000024fffffff] usable
[ 0.000000] BIOS: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[ 0.000000] e820: Xen-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x00000001addc9fff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./FM2A75 Pro4, BIOS P2.40 07/11/2013
[ 0.000000] e820: last_pfn = 0x1addca max_arch_pfn = 0x80000000
[ 0.000000] e820: last_pfn = 0x100000 max_arch_pfn = 0x80000000
[ 0.000000] found SMP MP-table at [mem 0x000fd900-0x000fd90f] mapped at [ffffffffff5ef900]
[ 0.000000] init_memory_mapping: [mem 0x1ad200000-0x1ad3fffff]
[ 0.000000] [mem 0x1ad200000-0x1ad3fffff] page 4k
[ 0.000000] BRK [0x00ae7000, 0x00ae7fff] PGTABLE
[ 0.000000] BRK [0x00ae8000, 0x00ae8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1ac000000-0x1ad1fffff]
[ 0.000000] [mem 0x1ac000000-0x1ad1fffff] page 4k
[ 0.000000] BRK [0x00ae9000, 0x00ae9fff] PGTABLE
[ 0.000000] BRK [0x00aea000, 0x00aeafff] PGTABLE
[ 0.000000] BRK [0x00aeb000, 0x00aebfff] PGTABLE
[ 0.000000] BRK [0x00aec000, 0x00aecfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x1abffffff]
[ 0.000000] [mem 0x180000000-0x1abffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x17fffffff]
[ 0.000000] [mem 0x00000000-0x17fffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x1ad400000-0x1addc9fff]
[ 0.000000] [mem 0x1ad400000-0x1addc9fff] page 4k
[ 0.000000] RAMDISK: [mem 0x01000000-0x03b1bfff]
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 000000008e04a078 00074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 000000008e050128 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130517/tbfadt-603)
[ 0.000000] ACPI: DSDT 000000008e04a188 05F9E (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 000000008e052e80 00040
[ 0.000000] ACPI: APIC 000000008e050220 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 000000008e050298 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 000000008e0502e0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: AAFT 000000008e050320 000E7 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000008e050408 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: IVRS 000000008e050440 00070 (v02 AMD ANNAPURN 00000001 AMD 00000000)
[ 0.000000] ACPI: SSDT 000000008e0504b0 00A60 (v01 AMD ANNAPURN 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 000000008e050f10 004B7 (v02 AMD ANNAPURN 00000001 MSFT 04000000)
[ 0.000000] ACPI: CRAT 000000008e0513c8 002F8 (v01 AMD ANNAPURN 00000001 AMD 00000001)
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00000000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1addc9fff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x1addc9fff]
[ 0.000000] On node 0 totalpages: 1760714
[ 0.000000] free_area_init_node: node 0, pgdat ffffffff80962440, node_mem_map ffff8801a6888000
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4096 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 1044480 pages, LIFO batch:31
[ 0.000000] Normal zone: 9737 pages used for memmap
[ 0.000000] Normal zone: 712138 pages, LIFO batch:31
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] e820: [mem 0x8f800000-0xfebfffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 19 pages/cpu @ffff8801a5800000 s48064 r8192 d21568 u524288
[ 0.000000] pcpu-alloc: s48064 r8192 d21568 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Swapping MFNs for PFN 988 and 1a5807 (MFN 224988 and 110bb)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1736641
[ 0.000000] Kernel command line: root=UUID=7cac86d2-796d-4fff-926e-c6d65219b54c ro quiet quiet resume=/dev/disk/by-id/ata-ST3320620AS_5QF5DRMP-part6 splash=silent quiet showopts
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] allocated 28171424 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Software IO TLB enabled:
Aperture: 64 megabytes
Address size: 27 bits
Kernel range: ffff88019f122000 - ffff8801a3122000
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Memory: 6737480K/7042856K available (5274K kernel code, 553K rwdata, 3876K rodata, 492K init, 868K bss, 305376K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-511.
[ 0.000000] nr_pirqs: 40
[ 0.000000] NR_IRQS:67328 nr_irqs:2792 16
[ 0.000000] Xen reported: 3893.010 MHz processor.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [xvc-1] enabled
[ 0.080001] Calibrating delay using timer specific routine.. 7888.77 BogoMIPS (lpj=15777543)
[ 0.080004] pid_max: default: 32768 minimum: 301
[ 0.080028] Security Framework initialized
[ 0.080045] AppArmor: AppArmor initialized
[ 0.080054] Mount-cache hash table entries: 256
[ 0.080187] Initializing cgroup subsys memory
[ 0.080198] Initializing cgroup subsys devices
[ 0.080200] Initializing cgroup subsys freezer
[ 0.080201] Initializing cgroup subsys net_cls
[ 0.080202] Initializing cgroup subsys blkio
[ 0.080204] Initializing cgroup subsys perf_event
[ 0.080230] mce: CPU supports 2 MCE banks
[ 0.080246] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
[ 0.109254] ACPI: Core revision 20130517
[ 0.115791] ACPI: All ACPI Tables successfully acquired
[ 0.116697] SMP alternatives: switching to SMP code
[ 0.146098] Brought up 4 CPUs
[ 0.146158] devtmpfs: initialized
[ 0.146158] RTC time: 18:41:16, date: 11/02/13
[ 0.146158] NET: Registered protocol family 16
[ 0.146158] ACPI: bus type PCI registered
[ 0.146158] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.146158] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.146158] PCI: not using MMCONFIG
[ 0.146158] PCI: Using configuration type 1 for base access
[ 0.146158] PCI: Using configuration type 1 for extended access
[ 0.146158] bio: create slab <bio-0> at 0
[ 0.146158] ACPI: Added _OSI(Module Device)
[ 0.146158] ACPI: Added _OSI(Processor Device)
[ 0.146158] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.146158] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.148442] ACPI: EC: Look up EC in DSDT
[ 0.149281] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.152724] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.153447] ACPI: Interpreter enabled
[ 0.153452] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 0.153455] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.153464] ACPI: (supports S0 S3 S5)
[ 0.153466] ACPI: Using IOAPIC for interrupt routing
[ 0.153693] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.153743] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.250325] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.250391] ACPI: No dock devices found.
[ 0.257837] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.258083] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
[ 0.258424] acpi PNP0A03:00: ACPI _OSC control (0x19) granted
[ 0.258915] PCI host bridge to bus 0000:00
[ 0.258918] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.258920] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.258921] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.258923] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.258924] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.258926] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.258927] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.258929] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xffffffff]
[ 0.258940] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.259063] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
[ 0.259231] pci 0000:00:01.0: [1002:990e] type 00 class 0x030000
[ 0.259245] pci 0000:00:01.0: reg 0x10: [mem 0xb0000000-0xbfffffff pref]
[ 0.259255] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
[ 0.259264] pci 0000:00:01.0: reg 0x18: [mem 0xff700000-0xff73ffff]
[ 0.259340] pci 0000:00:01.0: supports D1 D2
[ 0.259417] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.259430] pci 0000:00:01.1: reg 0x10: [mem 0xff740000-0xff743fff]
[ 0.259520] pci 0000:00:01.1: supports D1 D2
[ 0.259603] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
[ 0.259692] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.259747] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.259826] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
[ 0.259853] pci 0000:00:10.0: reg 0x10: [mem 0xff746000-0xff747fff 64bit]
[ 0.259993] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.260007] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.260061] pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
[ 0.260088] pci 0000:00:10.1: reg 0x10: [mem 0xff744000-0xff745fff 64bit]
[ 0.260229] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.260291] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.260343] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.260368] pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
[ 0.260381] pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
[ 0.260394] pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
[ 0.260406] pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
[ 0.260419] pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
[ 0.260431] pci 0000:00:11.0: reg 0x24: [mem 0xff74d000-0xff74d7ff]
[ 0.260570] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.260588] pci 0000:00:12.0: reg 0x10: [mem 0xff74c000-0xff74cfff]
[ 0.260705] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.260749] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.260775] pci 0000:00:12.2: reg 0x10: [mem 0xff74b000-0xff74b0ff]
[ 0.260890] pci 0000:00:12.2: supports D1 D2
[ 0.260892] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.260942] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.260984] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.261001] pci 0000:00:13.0: reg 0x10: [mem 0xff74a000-0xff74afff]
[ 0.261119] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.261162] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.261188] pci 0000:00:13.2: reg 0x10: [mem 0xff749000-0xff7490ff]
[ 0.261304] pci 0000:00:13.2: supports D1 D2
[ 0.261305] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.261355] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.261398] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.261552] pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
[ 0.261570] pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
[ 0.261583] pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
[ 0.261595] pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
[ 0.261608] pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
[ 0.261620] pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
[ 0.261723] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.262596] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.262682] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.262716] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[ 0.262734] pci 0000:00:14.5: reg 0x10: [mem 0xff748000-0xff748fff]
[ 0.262851] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.262896] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[ 0.263007] pci 0000:00:15.0: supports D1 D2
[ 0.263062] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.263104] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
[ 0.263215] pci 0000:00:15.2: supports D1 D2
[ 0.263270] pci 0000:00:15.2: System wakeup disabled by ACPI
[ 0.263309] pci 0000:00:15.3: [1022:43a3] type 01 class 0x060400
[ 0.263420] pci 0000:00:15.3: supports D1 D2
[ 0.263475] pci 0000:00:15.3: System wakeup disabled by ACPI
[ 0.263515] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.263613] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.263705] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.263801] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.263909] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.264000] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.264136] pci 0000:01:00.0: [1002:6819] type 00 class 0x030000
[ 0.264156] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.264173] pci 0000:01:00.0: reg 0x18: [mem 0xff600000-0xff63ffff 64bit]
[ 0.264184] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.264205] pci 0000:01:00.0: reg 0x30: [mem 0xff640000-0xff65ffff pref]
[ 0.264270] pci 0000:01:00.0: supports D1 D2
[ 0.264271] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.264346] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[ 0.264366] pci 0000:01:00.1: reg 0x10: [mem 0xff660000-0xff663fff 64bit]
[ 0.264478] pci 0000:01:00.1: supports D1 D2
[ 0.272031] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.272041] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.272045] pci 0000:00:02.0: bridge window [mem 0xff600000-0xff6fffff]
[ 0.272051] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.272119] pci 0000:02:06.0: [1102:0007] type 00 class 0x040100
[ 0.272148] pci 0000:02:06.0: reg 0x10: [io 0xd000-0xd01f]
[ 0.272274] pci 0000:02:06.0: supports D1 D2
[ 0.272338] pci 0000:02:07.0: [9710:9835] type 00 class 0x070002
[ 0.272360] pci 0000:02:07.0: reg 0x10: [io 0xd070-0xd077]
[ 0.272375] pci 0000:02:07.0: reg 0x14: [io 0xd060-0xd067]
[ 0.272390] pci 0000:02:07.0: reg 0x18: [io 0xd050-0xd057]
[ 0.272405] pci 0000:02:07.0: reg 0x1c: [io 0xd040-0xd047]
[ 0.272421] pci 0000:02:07.0: reg 0x20: [io 0xd030-0xd037]
[ 0.272436] pci 0000:02:07.0: reg 0x24: [io 0xd020-0xd02f]
[ 0.272542] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.272547] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 0.272555] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.272557] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.272558] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.272560] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.272561] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.272563] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.272564] pci 0000:00:14.4: bridge window [mem 0xb0000000-0xffffffff] (subtractive decode)
[ 0.272671] pci 0000:03:00.0: [1131:7160] type 00 class 0x048000
[ 0.272705] pci 0000:03:00.0: reg 0x10: [mem 0xff500000-0xff5fffff 64bit]
[ 0.272880] pci 0000:03:00.0: supports D1 D2
[ 0.272882] pci 0000:03:00.0: PME# supported from D0 D1 D2
[ 0.272945] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.272957] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.272967] pci 0000:00:15.0: bridge window [mem 0xff500000-0xff5fffff]
[ 0.273078] pci 0000:04:00.0: [1b6f:7052] type 00 class 0x0c0330
[ 0.273109] pci 0000:04:00.0: reg 0x10: [mem 0xff400000-0xff407fff 64bit]
[ 0.273263] pci 0000:04:00.0: supports D1 D2
[ 0.273264] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.280033] pci 0000:00:15.2: PCI bridge to [bus 04]
[ 0.280046] pci 0000:00:15.2: bridge window [mem 0xff400000-0xff4fffff]
[ 0.280172] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.280195] pci 0000:05:00.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.280234] pci 0000:05:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.280258] pci 0000:05:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.280363] pci 0000:05:00.0: supports D1 D2
[ 0.280365] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.288034] pci 0000:00:15.3: PCI bridge to [bus 05]
[ 0.288044] pci 0000:00:15.3: bridge window [io 0xc000-0xcfff]
[ 0.288054] pci 0000:00:15.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.288089] pci_bus 0000:00: on NUMA node 0
[ 0.288747] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.288845] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.288949] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.289051] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.289132] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.289195] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.289257] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.289320] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.289458] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.289487] Found 1 acpi root devices
[ 0.289608] pci 0000:00:00.2: GSI16: level-low
[ 0.289689] pci 0000:00:01.0: GSI17: level-low
[ 0.289769] pci 0000:00:01.1: GSI18: level-low
[ 0.290070] pci 0000:00:11.0: GSI19: level-low
[ 0.290814] pci 0000:02:06.0: GSI21: level-low
[ 0.290849] pci 0000:02:07.0: GSI22: level-low
[ 0.290938] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=mem,locks=none
[ 0.290938] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.290938] vgaarb: loaded
[ 0.290938] vgaarb: bridge control possible 0000:01:00.0
[ 0.290938] vgaarb: no bridge control possible 0000:00:01.0
[ 0.290938] xen_mem: Initialising balloon driver.
[ 0.290938] SCSI subsystem initialized
[ 0.290938] ACPI: bus type ATA registered
[ 0.290938] libata version 3.00 loaded.
[ 0.290938] PCI: Using ACPI for IRQ routing
[ 0.303563] PCI: pci_cache_line_size set to 64 bytes
[ 0.303678] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.303680] e820: reserve RAM buffer [mem 0x8d68b000-0x8fffffff]
[ 0.303681] e820: reserve RAM buffer [mem 0x8ea46000-0x8fffffff]
[ 0.303682] e820: reserve RAM buffer [mem 0x8f064000-0x8fffffff]
[ 0.303683] e820: reserve RAM buffer [mem 0x8f800000-0x8fffffff]
[ 0.303750] NetLabel: Initializing
[ 0.303752] NetLabel: domain hash size = 128
[ 0.303752] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.303760] NetLabel: unlabeled traffic allowed by default
[ 0.303804] Switched to clocksource xen
[ 0.303804] AppArmor: AppArmor Filesystem Enabled
[ 0.303804] pnp: PnP ACPI init
[ 0.303804] ACPI: bus type PNP registered
[ 0.303804] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.303804] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.303804] system 00:01: [mem 0x90000000-0xafffffff] has been reserved
[ 0.303804] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303804] system 00:02: [mem 0xfeb80000-0xfebfffff] has been reserved
[ 0.303804] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303804] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.303804] system 00:03: [io 0x040b] has been reserved
[ 0.303804] system 00:03: [io 0x04d6] has been reserved
[ 0.303804] system 00:03: [io 0x0c00-0x0c01] has been reserved
[ 0.303804] system 00:03: [io 0x0c14] has been reserved
[ 0.303804] system 00:03: [io 0x0c50-0x0c51] has been reserved
[ 0.303804] system 00:03: [io 0x0c52] has been reserved
[ 0.303804] system 00:03: [io 0x0c6c] has been reserved
[ 0.303804] system 00:03: [io 0x0c6f] has been reserved
[ 0.303804] system 00:03: [io 0x0cd0-0x0cd1] has been reserved
[ 0.303804] system 00:03: [io 0x0cd2-0x0cd3] has been reserved
[ 0.303804] system 00:03: [io 0x0cd4-0x0cd5] has been reserved
[ 0.303804] system 00:03: [io 0x0cd6-0x0cd7] has been reserved
[ 0.303804] system 00:03: [io 0x0cd8-0x0cdf] has been reserved
[ 0.303804] system 00:03: [io 0x0800-0x089f] could not be reserved
[ 0.303804] system 00:03: [io 0x0b20-0x0b3f] has been reserved
[ 0.303804] system 00:03: [io 0x0900-0x090f] has been reserved
[ 0.303804] system 00:03: [io 0x0910-0x091f] has been reserved
[ 0.303804] system 00:03: [io 0xfe00-0xfefe] has been reserved
[ 0.303804] system 00:03: [mem 0xfec00000-0xfec00fff] has been reserved
[ 0.303804] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.303804] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.303804] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.303804] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.303804] system 00:03: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.303804] system 00:03: [mem 0xff800000-0xffffffff] has been reserved
[ 0.303804] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303804] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.303804] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303804] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303804] pnp 00:06: [dma 4]
[ 0.303804] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.303804] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.303804] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.303804] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.303804] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303804] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.303804] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.303804] pnp: PnP ACPI: found 12 devices
[ 0.303804] ACPI: bus type PNP unregistered
[ 0.305740] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.305744] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.305749] pci 0000:00:02.0: bridge window [mem 0xff600000-0xff6fffff]
[ 0.305753] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.305760] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.305763] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 0.305779] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.305785] pci 0000:00:15.0: bridge window [mem 0xff500000-0xff5fffff]
[ 0.305795] pci 0000:00:15.2: PCI bridge to [bus 04]
[ 0.305800] pci 0000:00:15.2: bridge window [mem 0xff400000-0xff4fffff]
[ 0.305810] pci 0000:00:15.3: PCI bridge to [bus 05]
[ 0.305813] pci 0000:00:15.3: bridge window [io 0xc000-0xcfff]
[ 0.305822] pci 0000:00:15.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.306175] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.306177] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.306179] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.306180] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.306181] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.306183] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.306184] pci_bus 0000:00: resource 10 [mem 0xb0000000-0xffffffff]
[ 0.306186] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.306187] pci_bus 0000:01: resource 1 [mem 0xff600000-0xff6fffff]
[ 0.306189] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.306191] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.306192] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
[ 0.306193] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
[ 0.306195] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
[ 0.306196] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
[ 0.306197] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.306199] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.306200] pci_bus 0000:02: resource 10 [mem 0xb0000000-0xffffffff]
[ 0.306202] pci_bus 0000:03: resource 1 [mem 0xff500000-0xff5fffff]
[ 0.306203] pci_bus 0000:04: resource 1 [mem 0xff400000-0xff4fffff]
[ 0.306205] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 0.306206] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.306294] NET: Registered protocol family 2
[ 0.306465] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.306680] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.306878] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.306912] TCP: reno registered
[ 0.306916] UDP hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.306966] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.307116] NET: Registered protocol family 1
[ 0.307153] pci 0000:00:01.0: Boot video device
[ 0.548275] pci 0000:01:00.0: Boot video device
[ 0.548453] PCI: CLS 64 bytes, default 64
[ 0.548501] Unpacking initramfs...
[ 0.584171] Freeing initrd memory: 44144K (ffff880001000000 - ffff880003b1c000)
[ 0.584480] audit: initializing netlink socket (disabled)
[ 0.584491] type=2000 audit(1383417675.584:1): initialized
[ 0.607190] zbud: loaded
[ 0.607379] VFS: Disk quotas dquot_6.5.2
[ 0.607404] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.607618] msgmni has been set to 13825
[ 0.607905] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.607950] io scheduler noop registered
[ 0.607952] io scheduler deadline registered
[ 0.607976] io scheduler cfq registered (default)
[ 0.608276] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.608287] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.608360] GHES: HEST is not enabled!
[ 0.608436] Non-volatile memory driver v1.3
[ 0.608437] Linux agpgart interface v0.103
[ 0.608844] Xen virtual console successfully installed as xvc0
[ 0.608899] ahci 0000:00:11.0: version 3.0
[ 0.609093] ahci 0000:00:11.0: irq 44 (279) for MSI/MSI-X
[ 0.609155] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
[ 0.609158] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part sxs
[ 0.609575] scsi0 : ahci
[ 0.609667] scsi1 : ahci
[ 0.609723] scsi2 : ahci
[ 0.609760] ata1: SATA max UDMA/133 abar m2048@0xff74d000 port 0xff74d100 irq 44
[ 0.609762] ata2: SATA max UDMA/133 abar m2048@0xff74d000 port 0xff74d180 irq 44
[ 0.609764] ata3: SATA max UDMA/133 abar m2048@0xff74d000 port 0xff74d200 irq 44
[ 0.609817] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.612894] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.612902] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.613057] mousedev: PS/2 mouse device common for all mice
[ 0.613151] rtc_cmos 00:07: RTC can wake from S4
[ 0.613276] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.613314] rtc_cmos 00:07: alarms up to one month, y3k, 114 bytes nvram
[ 0.613323] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.613334] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.613459] TCP: cubic registered
[ 0.613534] NET: Registered protocol family 10
[ 0.613669] Key type dns_resolver registered
[ 0.613739] MCE: bind virq for DOM0 logging
[ 0.613759] MCE_DOM0_LOG: enter dom0 mce vIRQ handler
[ 0.613761] MCE_DOM0_LOG: No more urgent data
[ 0.613762] MCE_DOM0_LOG: No more nonurgent data
[ 0.613840] registered taskstats version 1
[ 0.614347] Magic number: 5:223:695
[ 0.614368] pci 0000:00:00.0: hash matches
[ 0.614416] rtc_cmos 00:07: setting system clock to 2013-11-02 18:41:16 UTC (1383417676)
[ 1.100099] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.100122] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.100141] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.101369] ata2.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA580, max UDMA/133
[ 1.101373] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.101672] ata1.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
[ 1.101673] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.102633] ata2.00: configured for UDMA/133
[ 1.103712] ata1.00: configured for UDMA/133
[ 1.103805] scsi 0:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5
[ 1.103949] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.103980] sd 0:0:0:0: [sda] Write Protect is off
[ 1.103982] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.103995] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.104233] scsi 1:0:0:0: Direct-Access ATA Hitachi HDS5C302 ML6O PQ: 0 ANSI: 5
[ 1.104318] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.104347] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.104349] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.104362] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.112520] sdb: sdb1
[ 1.112709] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.147712] ata3.00: HPA detected: current 625140335, native 625142448
[ 1.147717] ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
[ 1.147718] ata3.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.165384] sda: sda1 sda4 < sda5 sda6 >
[ 1.165633] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.206022] ata3.00: configured for UDMA/133
[ 1.206171] scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 1.206283] sd 2:0:0:0: [sdc] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[ 1.206319] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.206321] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.206335] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.293130] sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 > sdc3 sdc4
[ 1.293486] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.293769] Freeing unused kernel memory: 492K (ffff880000981000 - ffff8800009fc000)
[ 1.293771] Write protecting the kernel read-only data: 9164k
[ 1.342320] Initialising virtual ethernet driver.
[ 1.350249] emc: device handler registered
[ 1.352286] rdac: device handler registered
[ 1.354107] hp_sw: device handler registered
[ 1.356115] alua: device handler registered
[ 1.362247] systemd-udevd[119]: starting version 208
[ 1.382120] ACPI: bus type USB registered
[ 1.382146] usbcore: registered new interface driver usbfs
[ 1.382155] usbcore: registered new interface driver hub
[ 1.382217] usbcore: registered new device driver usb
[ 1.382871] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.382879] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 1.382914] QUIRK: Enable AMD PLL fix
[ 1.383183] xhci_hcd 0000:00:10.0: irq 46 (278) for MSI/MSI-X
[ 1.383230] xhci_hcd 0000:00:10.0: irq 47 (277) for MSI/MSI-X
[ 1.383273] xhci_hcd 0000:00:10.0: irq 48 (276) for MSI/MSI-X
[ 1.383317] xhci_hcd 0000:00:10.0: irq 49 (275) for MSI/MSI-X
[ 1.383360] xhci_hcd 0000:00:10.0: irq 50 (274) for MSI/MSI-X
[ 1.383482] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.383484] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.383486] usb usb1: Product: xHCI Host Controller
[ 1.383487] usb usb1: Manufacturer: Linux 3.11.6-3-xen xhci_hcd
[ 1.383489] usb usb1: SerialNumber: 0000:00:10.0
[ 1.383576] xHCI xhci_add_endpoint called for root hub
[ 1.383579] xHCI xhci_check_bandwidth called for root hub
[ 1.383599] hub 1-0:1.0: USB hub found
[ 1.383606] hub 1-0:1.0: 2 ports detected
[ 1.383677] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.383681] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.386505] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.386508] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.386509] usb usb2: Product: xHCI Host Controller
[ 1.386511] usb usb2: Manufacturer: Linux 3.11.6-3-xen xhci_hcd
[ 1.386513] usb usb2: SerialNumber: 0000:00:10.0
[ 1.386601] xHCI xhci_add_endpoint called for root hub
[ 1.386603] xHCI xhci_check_bandwidth called for root hub
[ 1.386629] hub 2-0:1.0: USB hub found
[ 1.386637] hub 2-0:1.0: 2 ports detected
[ 1.389909] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.390091] ehci-pci: EHCI PCI platform driver
[ 1.397658] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.398470] ohci-pci: OHCI PCI platform driver
[ 1.408363] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.408371] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.408653] xhci_hcd 0000:00:10.1: irq 51 (273) for MSI/MSI-X
[ 1.408699] xhci_hcd 0000:00:10.1: irq 52 (272) for MSI/MSI-X
[ 1.408742] xhci_hcd 0000:00:10.1: irq 53 (271) for MSI/MSI-X
[ 1.408787] xhci_hcd 0000:00:10.1: irq 54 (270) for MSI/MSI-X
[ 1.408831] xhci_hcd 0000:00:10.1: irq 55 (269) for MSI/MSI-X
[ 1.408960] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.408962] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.408964] usb usb3: Product: xHCI Host Controller
[ 1.408966] usb usb3: Manufacturer: Linux 3.11.6-3-xen xhci_hcd
[ 1.408968] usb usb3: SerialNumber: 0000:00:10.1
[ 1.409039] xHCI xhci_add_endpoint called for root hub
[ 1.409041] xHCI xhci_check_bandwidth called for root hub
[ 1.409070] hub 3-0:1.0: USB hub found
[ 1.409076] hub 3-0:1.0: 2 ports detected
[ 1.409165] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.409168] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
[ 1.411978] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.411981] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.411982] usb usb4: Product: xHCI Host Controller
[ 1.411984] usb usb4: Manufacturer: Linux 3.11.6-3-xen xhci_hcd
[ 1.411986] usb usb4: SerialNumber: 0000:00:10.1
[ 1.412035] xHCI xhci_add_endpoint called for root hub
[ 1.412036] xHCI xhci_check_bandwidth called for root hub
[ 1.412072] hub 4-0:1.0: USB hub found
[ 1.412079] hub 4-0:1.0: 2 ports detected
[ 1.428302] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.428311] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
[ 1.428511] xhci_hcd 0000:04:00.0: irq 56 (268) for MSI/MSI-X
[ 1.428602] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.428604] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.428605] usb usb5: Product: xHCI Host Controller
[ 1.428606] usb usb5: Manufacturer: Linux 3.11.6-3-xen xhci_hcd
[ 1.428608] usb usb5: SerialNumber: 0000:04:00.0
[ 1.428686] xHCI xhci_add_endpoint called for root hub
[ 1.428688] xHCI xhci_check_bandwidth called for root hub
[ 1.428708] hub 5-0:1.0: USB hub found
[ 1.428717] hub 5-0:1.0: 4 ports detected
[ 1.428802] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.428805] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
[ 1.428825] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.428840] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.428842] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.428843] usb usb6: Product: xHCI Host Controller
[ 1.428845] usb usb6: Manufacturer: Linux 3.11.6-3-xen xhci_hcd
[ 1.428846] usb usb6: SerialNumber: 0000:04:00.0
[ 1.428887] xHCI xhci_add_endpoint called for root hub
[ 1.428888] xHCI xhci_check_bandwidth called for root hub
[ 1.428905] hub 6-0:1.0: USB hub found
[ 1.428914] hub 6-0:1.0: 4 ports detected
[ 1.428995] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 7
[ 1.429002] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.429020] ehci-pci 0000:00:12.2: debug port 1
[ 1.429098] ehci-pci 0000:00:12.2: irq 17, io mem 0xff74b000
[ 1.440108] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.440131] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.440133] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.440135] usb usb7: Product: EHCI Host Controller
[ 1.440136] usb usb7: Manufacturer: Linux 3.11.6-3-xen ehci_hcd
[ 1.440137] usb usb7: SerialNumber: 0000:00:12.2
[ 1.440254] hub 7-0:1.0: USB hub found
[ 1.440257] hub 7-0:1.0: 5 ports detected
[ 1.440507] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.440513] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 8
[ 1.440516] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.440530] ehci-pci 0000:00:13.2: debug port 1
[ 1.440568] ehci-pci 0000:00:13.2: irq 17, io mem 0xff749000
[ 1.452111] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.452138] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.452140] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.452142] usb usb8: Product: EHCI Host Controller
[ 1.452143] usb usb8: Manufacturer: Linux 3.11.6-3-xen ehci_hcd
[ 1.452145] usb usb8: SerialNumber: 0000:00:13.2
[ 1.452293] hub 8-0:1.0: USB hub found
[ 1.452299] hub 8-0:1.0: 5 ports detected
[ 1.452652] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.452661] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 9
[ 1.452717] ohci-pci 0000:00:12.0: irq 18, io mem 0xff74c000
[ 1.512153] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.512157] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.512159] usb usb9: Product: OHCI PCI host controller
[ 1.512160] usb usb9: Manufacturer: Linux 3.11.6-3-xen ohci_hcd
[ 1.512162] usb usb9: SerialNumber: 0000:00:12.0
[ 1.512306] hub 9-0:1.0: USB hub found
[ 1.512312] hub 9-0:1.0: 5 ports detected
[ 1.512544] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.512548] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 10
[ 1.512570] ohci-pci 0000:00:13.0: irq 18, io mem 0xff74a000
[ 1.572151] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.572155] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.572157] usb usb10: Product: OHCI PCI host controller
[ 1.572158] usb usb10: Manufacturer: Linux 3.11.6-3-xen ohci_hcd
[ 1.572159] usb usb10: SerialNumber: 0000:00:13.0
[ 1.572284] hub 10-0:1.0: USB hub found
[ 1.572292] hub 10-0:1.0: 5 ports detected
[ 1.572532] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.572537] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 11
[ 1.572564] ohci-pci 0000:00:14.5: irq 18, io mem 0xff748000
[ 1.632158] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.632161] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.632163] usb usb11: Product: OHCI PCI host controller
[ 1.632164] usb usb11: Manufacturer: Linux 3.11.6-3-xen ohci_hcd
[ 1.632166] usb usb11: SerialNumber: 0000:00:14.5
[ 1.632300] hub 11-0:1.0: USB hub found
[ 1.632306] hub 11-0:1.0: 2 ports detected
[ 1.740099] usb 5-4: new full-speed USB device number 2 using xhci_hcd
[ 1.813979] usb 5-4: New USB device found, idVendor=045e, idProduct=0291
[ 1.813982] usb 5-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.036096] usb 8-4: new high-speed USB device number 2 using ehci-pci
[ 2.317364] usb 8-4: New USB device found, idVendor=048d, idProduct=1336
[ 2.317368] usb 8-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.317370] usb 8-4: Product: Mass Storage Device
[ 2.317371] usb 8-4: Manufacturer: Generic
[ 2.317373] usb 8-4: SerialNumber: 00000000000006
[ 2.594578] xor: measuring software checksum speed
[ 2.632068] 8regs : 17086.000 MB/sec
[ 2.672055] 8regs_prefetch: 14483.000 MB/sec
[ 2.712055] 32regs : 12300.000 MB/sec
[ 2.712089] usb 9-3: new low-speed USB device number 2 using ohci-pci
[ 2.752056] 32regs_prefetch: 11129.000 MB/sec
[ 2.792056] generic_sse: 8171.000 MB/sec
[ 2.832058] prefetch64-sse: 8333.000 MB/sec
[ 2.872057] avx : 4119.000 MB/sec
[ 2.872059] xor: using function: 8regs (17086.000 MB/sec)
[ 2.881158] usb 9-3: New USB device found, idVendor=09da, idProduct=000a
[ 2.881162] usb 9-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.881164] usb 9-3: Product: PS/2+USB Mouse
[ 2.881165] usb 9-3: Manufacturer: A4Tech
[ 2.940056] raid6: sse2x1 6986 MB/s
[ 3.008058] raid6: sse2x2 11261 MB/s
[ 3.016092] usb 9-4: new low-speed USB device number 3 using ohci-pci
[ 3.076059] raid6: sse2x4 12916 MB/s
[ 3.076061] raid6: using algorithm sse2x4 (12916 MB/s)
[ 3.076062] raid6: using ssse3x2 recovery algorithm
[ 3.079040] bio: create slab <bio-1> at 1
[ 3.079268] Btrfs loaded
[ 3.168175] usbhid 9-3:1.0: can't add hid device: -62
[ 3.168250] usbhid: probe of 9-3:1.0 failed with error -62
[ 3.168277] usbcore: registered new interface driver usbhid
[ 3.168278] usbhid: USB HID core driver
[ 3.200175] usb 9-4: New USB device found, idVendor=045e, idProduct=00dd
[ 3.200179] usb 9-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.200181] usb 9-4: Product: Comfort Curve Keyboard 2000
[ 3.200182] usb 9-4: Manufacturer: Microsoft
[ 3.226204] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:12.0/usb9/9-4/9-4:1.0/input/input0
[ 3.226279] hid-generic 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:12.0-4/input0
[ 3.228287] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:12.0/usb9/9-4/9-4:1.1/input/input1
[ 3.228368] hid-generic 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:12.0-4/input1
[ 3.376114] usb 9-3: USB disconnect, device number 2
[ 3.640088] usb 9-3: new low-speed USB device number 4 using ohci-pci
[ 3.809160] usb 9-3: New USB device found, idVendor=09da, idProduct=000a
[ 3.809165] usb 9-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.809166] usb 9-3: Product: PS/2+USB Mouse
[ 3.809168] usb 9-3: Manufacturer: A4Tech
[ 3.816335] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:12.0/usb9/9-3/9-3:1.0/input/input2
[ 3.816426] a4tech 0003:09DA:000A.0003: input,hidraw2: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:12.0-3/input0
[ 6.359357] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 6.622648] EXT4-fs (sdc3): re-mounted. Opts: acl,user_xattr
[ 7.388875] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 7.388931] systemd[1]: Detected virtualization 'xen'.
[ 7.698223] systemd[1]: Inserted module 'autofs4'
[ 7.709558] systemd[1]: Set hostname to <linux-b52d>.
[ 8.102450] device-mapper: uevent: version 1.0.3
[ 8.102510] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 8.103555] LVM: Activation generator successfully completed.
[ 9.067411] systemd[1]: Started Collect Read-Ahead Data.
[ 9.067423] systemd[1]: Started Replay Read-Ahead Data.
[ 9.067431] systemd[1]: Expecting device dev-xvc-1.device...
[ 9.067669] systemd[1]: Expecting device dev-xvc0.device...
[ 9.067878] systemd[1]: Starting System Time Synchronized.
[ 9.068108] systemd[1]: Reached target System Time Synchronized.
[ 9.068116] systemd[1]: Starting Remote File Systems (Pre).
[ 9.068324] systemd[1]: Reached target Remote File Systems (Pre).
[ 9.068331] systemd[1]: Starting Remote File Systems.
[ 9.068538] systemd[1]: Reached target Remote File Systems.
[ 9.068547] systemd[1]: Starting Syslog Socket.
[ 9.068792] systemd[1]: Listening on Syslog Socket.
[ 9.068802] systemd[1]: Starting Delayed Shutdown Socket.
[ 9.069025] systemd[1]: Listening on Delayed Shutdown Socket.
[ 9.069033] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 9.069255] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 9.069267] systemd[1]: Starting Journal Socket.
[ 9.069516] systemd[1]: Listening on Journal Socket.
[ 9.095782] systemd[1]: Starting Load Kernel Modules...
[ 9.096988] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 9.097739] systemd[1]: Mounting Debug File System...
[ 9.098553] systemd[1]: Mounted Huge Pages File System.
[ 9.098604] systemd[1]: Starting Setup Virtual Console...
[ 9.099414] systemd[1]: Starting Create dynamic rule for /dev/root link...
[ 9.100265] systemd[1]: Starting Journal Service...
[ 9.101331] systemd[1]: Started Journal Service.
[ 9.567907] systemd-journald[268]: Vacuuming done, freed 0 bytes
[ 9.689519] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.689561] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 9.689585] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 10.288826] systemd-udevd[306]: starting version 208
[ 10.338340] EXT4-fs (sdc3): re-mounted. Opts: acl,user_xattr
[ 11.166441] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 11.166519] ACPI: Power Button [PWRB]
[ 11.166570] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 11.166599] ACPI: Power Button [PWRF]
[ 11.386418] scsi3 : pata_atiixp
[ 11.386850] scsi4 : pata_atiixp
[ 11.387222] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
[ 11.387224] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
[ 11.493294] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 11.617402] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[ 11.681338] 0000:02:07.0: ttyS4 at I/O 0xd070 (irq = 22) is a 16550A
[ 11.681430] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.681452] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 11.702702] 0000:02:07.0: ttyS5 at I/O 0xd060 (irq = 22) is a 16550A
[ 11.826655] [drm] Initialized drm 1.1.0 20060810
[ 12.209487] pciback 0000:00:01.0: seizing device
[ 12.209498] pciback 0000:00:01.1: seizing device
[ 12.238707] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 12.238994] r8169 0000:05:00.0: irq 57 (267) for MSI/MSI-X
[ 12.239138] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000028000, bc:5f:f4:8b:26:81, XID 0c900800 IRQ 57
[ 12.239140] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 12.240274] pciback 0000:00:01.0: enabling device (0006 -> 0007)
[ 12.272320] pciback: backend is vpci
[ 12.284278] systemd-udevd[337]: renamed network interface eth0 to enp5s0
[ 12.416312] input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:15.2/0000:04:00.0/usb5/5-4/5-4:1.0/input/input6
[ 12.416481] input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:15.2/0000:04:00.0/usb5/5-4/5-4:1.2/input/input7
[ 12.416597] input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:15.2/0000:04:00.0/usb5/5-4/5-4:1.4/input/input8
[ 12.416705] input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:15.2/0000:04:00.0/usb5/5-4/5-4:1.6/input/input9
[ 12.416794] usbcore: registered new interface driver xpad
[ 12.480111] ppdev: user-space parallel port driver
[ 12.498551] usb-storage 8-4:1.0: USB Mass Storage device detected
[ 12.498747] scsi5 : usb-storage 8-4:1.0
[ 12.498817] usbcore: registered new interface driver usb-storage
[ 12.771535] systemd-journald[268]: Received request to flush runtime journal from PID 1
[ 12.879202] [drm] radeon kernel modesetting enabled.
[ 12.879542] [drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6819 0x1458:0x2553).
[ 12.879662] [drm] register mmio base: 0xFF600000
[ 12.879663] [drm] register mmio size: 262144
[ 12.879848] ATOM BIOS: GV
[ 12.879912] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 12.879914] radeon 0000:01:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 12.879915] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 12.879916] [drm] RAM width 256bits DDR
[ 12.879998] [TTM] Zone kernel: Available graphics memory: 3539650 kiB
[ 12.880000] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 12.880001] [TTM] Initializing pool allocator
[ 12.880004] [TTM] Initializing DMA pool allocator
[ 12.880035] [drm] radeon: 2048M of VRAM memory ready
[ 12.880036] [drm] radeon: 512M of GTT memory ready.
[ 13.061956] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 13.062624] [drm] probing gen 2 caps for device 1022:1412 = 700d02/6
[ 13.062629] [drm] PCIE gen 2 link speeds already enabled
[ 13.078365] [drm] Loading PITCAIRN Microcode
[ 13.496777] scsi 5:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
[ 13.497018] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 13.500892] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[ 13.776873] [drm] PCIE GART of 512M enabled (table at 0x0000000000276000).
[ 13.777022] radeon 0000:01:00.0: WB enabled
[ 13.777025] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88019d619c00
[ 13.777027] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88019d619c04
[ 13.777029] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88019d619c08
[ 13.777031] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88019d619c0c
[ 13.777032] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88019d619c10
[ 13.777999] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90010435a18
[ 13.778001] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 13.778002] [drm] Driver supports precise vblank timestamp query.
[ 13.778051] radeon 0000:01:00.0: irq 58 (266) for MSI/MSI-X
[ 13.778067] radeon 0000:01:00.0: radeon: using MSI.
[ 13.778103] [drm] radeon: irq initialized.
[ 13.801276] [drm] ring test on 0 succeeded in 3 usecs
[ 13.801283] [drm] ring test on 1 succeeded in 1 usecs
[ 13.801288] [drm] ring test on 2 succeeded in 1 usecs
[ 13.801352] [drm] ring test on 3 succeeded in 2 usecs
[ 13.801363] [drm] ring test on 4 succeeded in 1 usecs
[ 13.989484] [drm] ring test on 5 succeeded in 2 usecs
[ 13.989490] [drm] UVD initialized successfully.
[ 13.996882] [drm] ib test on ring 0 succeeded in 0 usecs
[ 13.996946] [drm] ib test on ring 1 succeeded in 0 usecs
[ 13.997001] [drm] ib test on ring 2 succeeded in 0 usecs
[ 13.997029] [drm] ib test on ring 3 succeeded in 0 usecs
[ 13.997059] [drm] ib test on ring 4 succeeded in 1 usecs
[ 14.152106] [drm] ib test on ring 5 succeeded
[ 14.152847] [drm] Radeon Display Connectors
[ 14.152849] [drm] Connector 0:
[ 14.152851] [drm] DP-1
[ 14.152852] [drm] HPD4
[ 14.152854] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 14.152855] [drm] Encoders:
[ 14.152856] [drm] DFP1: INTERNAL_UNIPHY2
[ 14.152857] [drm] Connector 1:
[ 14.152858] [drm] DP-2
[ 14.152859] [drm] HPD5
[ 14.152861] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 14.152862] [drm] Encoders:
[ 14.152863] [drm] DFP2: INTERNAL_UNIPHY2
[ 14.152864] [drm] Connector 2:
[ 14.152865] [drm] HDMI-A-1
[ 14.152866] [drm] HPD1
[ 14.152868] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 14.152869] [drm] Encoders:
[ 14.152870] [drm] DFP3: INTERNAL_UNIPHY1
[ 14.152871] [drm] Connector 3:
[ 14.152872] [drm] DVI-I-1
[ 14.152873] [drm] HPD6
[ 14.152875] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[ 14.152876] [drm] Encoders:
[ 14.152877] [drm] DFP4: INTERNAL_UNIPHY
[ 14.152878] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 14.152934] [drm] Internal thermal controller with fan control
[ 14.152971] [drm] radeon: power management initialized
[ 14.211208] [drm] fb mappable at 0xC1388000
[ 14.211212] [drm] vram apper at 0xC0000000
[ 14.211213] [drm] size 8294400
[ 14.211214] [drm] fb depth is 24
[ 14.211216] [drm] pitch is 7680
[ 14.237421] Console: switching to colour frame buffer device 240x67
[ 14.241072] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 14.241074] radeon 0000:01:00.0: registered panic notifier
[ 14.241078] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0
[ 14.352393] Adding 1572948k swap on /dev/sdc6. Priority:-1 extents:1 across:1572948k FS
[ 14.782748] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
[ 14.885430] ALSA hda_intel.c:3116 0000:01:00.1: Handle VGA-switcheroo audio client
[ 14.885435] ALSA hda_intel.c:3317 0000:01:00.1: Using LPIB position fix
[ 14.885437] ALSA hda_intel.c:3438 0000:01:00.1: Force to non-snoop mode
[ 14.885531] snd_hda_intel 0000:01:00.1: irq 59 (265) for MSI/MSI-X
[ 14.888186] ALSA hda_intel.c:1787 0000:01:00.1: Enable sync_write for stable communication
[ 14.908667] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[ 14.908784] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[ 14.908850] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[ 14.908915] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[ 14.908984] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 14.909046] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 15.371461] type=1400 audit(1383417691.252:2): apparmor="STATUS" operation="profile_load" name="/{usr/,}bin/ping" pid=495 comm="apparmor_parser"
[ 15.409358] type=1400 audit(1383417691.292:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=504 comm="apparmor_parser"
[ 15.425523] type=1400 audit(1383417691.308:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=508 comm="apparmor_parser"
[ 15.440459] type=1400 audit(1383417691.324:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=512 comm="apparmor_parser"
[ 15.484756] type=1400 audit(1383417691.368:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=517 comm="apparmor_parser"
[ 15.484976] type=1400 audit(1383417691.368:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=517 comm="apparmor_parser"
[ 15.485167] type=1400 audit(1383417691.368:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=517 comm="apparmor_parser"
[ 15.485331] type=1400 audit(1383417691.368:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=517 comm="apparmor_parser"
[ 15.504210] type=1400 audit(1383417691.388:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/deliver" pid=521 comm="apparmor_parser"
[ 15.533829] type=1400 audit(1383417691.416:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/dovecot-auth" pid=525 comm="apparmor_parser"
[ 16.654301] xen:evtchn: Event-channel device installed
[ 16.780249] usbcore: registered new interface driver usbback
[ 16.863366] nbd: registered device at major 43
[ 17.887305] Unable to read sysrq code in control/sysrq
[ 21.128582] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 21.128586] vgaarb: transferring owner from PCI:0000:01:00.0 to PCI:0000:00:01.0
[ 22.650140] r8169 0000:05:00.0 enp5s0: link down
[ 22.650174] r8169 0000:05:00.0 enp5s0: link down
[ 22.650191] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 22.763387] NET: Registered protocol family 17
[ 29.083216] r8169 0000:05:00.0 enp5s0: link up
[ 29.083226] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[ 43.121230] Bridge firewalling registered
[ 43.131525] device enp5s0 entered promiscuous mode
[ 43.137157] br0: port 1(enp5s0) entered forwarding state
[ 43.137176] br0: port 1(enp5s0) entered forwarding state
[ 45.370242] Ebtables v2.0 registered
[ 45.487452] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 45.546944] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 47.576815] br0: port 1(enp5s0) entered disabled state
[ 47.606662] device enp5s0 left promiscuous mode
[ 47.606672] br0: port 1(enp5s0) entered disabled state
[ 60.486236] Bluetooth: Core ver 2.16
[ 60.486258] NET: Registered protocol family 31
[ 60.486259] Bluetooth: HCI device and connection manager initialized
[ 60.486269] Bluetooth: HCI socket layer initialized
[ 60.486272] Bluetooth: L2CAP socket layer initialized
[ 60.486277] Bluetooth: SCO socket layer initialized
[ 60.502246] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 60.502250] Bluetooth: BNEP filters: protocol multicast
[ 60.502258] Bluetooth: BNEP socket layer initialized
[-- Attachment #5: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 46+ messages in thread* Re: HVM crash system on AMD APU A8-6600K
2013-11-02 9:51 Vitaliy Tomin
@ 2014-04-02 14:44 ` George Dunlap
2014-04-07 14:50 ` Vitaliy Tomin
0 siblings, 1 reply; 46+ messages in thread
From: George Dunlap @ 2014-04-02 14:44 UTC (permalink / raw)
To: Vitaliy Tomin; +Cc: xen-devel@lists.xensource.com
On Sat, Nov 2, 2013 at 9:51 AM, Vitaliy Tomin <highwaystar.ru@gmail.com> wrote:
> I have same problem described in earlier thread:
> http://lists.xen.org/archives/html/xen-devel/2013-08/msg01395.html
>
> Trying to start HVM domain leads to dom0 crash (simple cold reboot).
> My system is openSUSE 13.1 RC2 with Xen 4.3.0
> My hardware is
>
> ASRock FM2A75 Pro4
> AMD A8-6600K APU
> Gigabyte Radeon 7850
> 8 Gb DDR3 1600Mhz
>
> I have setup serial console and could provide logs your requested.
> Attached logs from xl dmesg, dom0 dmesg and serial console with:
> loglvl=all iommu=debug,verbose apic_verbosity=debug cpuinfo
> console=com1 com1=115200,8n1,pci
Vitaliy,
Are you still having this issue?
-George
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: HVM crash system on AMD APU A8-6600K
2014-04-02 14:44 ` George Dunlap
@ 2014-04-07 14:50 ` Vitaliy Tomin
0 siblings, 0 replies; 46+ messages in thread
From: Vitaliy Tomin @ 2014-04-07 14:50 UTC (permalink / raw)
To: xen-devel
Yes, problem is still here. I've tested with Xen 4.4 RCs and reported
another thread in Feb 2014
http://lists.xenproject.org/archives/html/xen-devel/2014-02/msg00089.html
On Wed, Apr 2, 2014 at 11:44 PM, George Dunlap
<George.Dunlap@eu.citrix.com> wrote:
> On Sat, Nov 2, 2013 at 9:51 AM, Vitaliy Tomin <highwaystar.ru@gmail.com> wrote:
>> I have same problem described in earlier thread:
>> http://lists.xen.org/archives/html/xen-devel/2013-08/msg01395.html
>>
>> Trying to start HVM domain leads to dom0 crash (simple cold reboot).
>> My system is openSUSE 13.1 RC2 with Xen 4.3.0
>> My hardware is
>>
>> ASRock FM2A75 Pro4
>> AMD A8-6600K APU
>> Gigabyte Radeon 7850
>> 8 Gb DDR3 1600Mhz
>>
>> I have setup serial console and could provide logs your requested.
>> Attached logs from xl dmesg, dom0 dmesg and serial console with:
>> loglvl=all iommu=debug,verbose apic_verbosity=debug cpuinfo
>> console=com1 com1=115200,8n1,pci
>
> Vitaliy,
>
> Are you still having this issue?
>
> -George
^ permalink raw reply [flat|nested] 46+ messages in thread
end of thread, other threads:[~2014-05-05 15:41 UTC | newest]
Thread overview: 46+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-02-03 13:47 HVM crash system on AMD APU A8-6600K Vitaliy Tomin
2014-02-03 13:51 ` Andrew Cooper
2014-02-03 13:58 ` Vitaliy Tomin
2014-02-03 14:08 ` Sander Eikelenboom
2014-02-03 14:09 ` Andrew Cooper
[not found] ` <CABPT1LscUZR_V1TOAzVmkvSms0M_Yucjp8WtUaeOADD_G-EbHA@mail.gmail.com>
2014-02-03 14:22 ` Vitaliy Tomin
2014-02-03 14:32 ` Andrew Cooper
2014-02-03 14:36 ` Vitaliy Tomin
2014-02-03 14:41 ` Andrew Cooper
2014-02-03 14:55 ` Konrad Rzeszutek Wilk
2014-02-03 15:18 ` Vitaliy Tomin
2014-02-03 15:47 ` Boris Ostrovsky
2014-02-13 14:37 ` Vitaliy Tomin
2014-04-07 15:36 ` George Dunlap
2014-04-08 8:18 ` Jan Beulich
2014-04-08 8:40 ` Vitaliy Tomin
2014-04-08 9:14 ` Jan Beulich
2014-04-08 12:53 ` Vitaliy Tomin
2014-04-08 14:00 ` Sander Eikelenboom
2014-04-08 15:23 ` Vitaliy Tomin
2014-04-08 16:02 ` Jan Beulich
2014-04-08 15:29 ` Vitaliy Tomin
2014-04-08 16:10 ` Sander Eikelenboom
2014-04-08 16:17 ` Konrad Rzeszutek Wilk
2014-04-09 1:43 ` Vitaliy Tomin
2014-04-10 13:01 ` Vitaliy Tomin
2014-04-10 13:30 ` Andrew Cooper
2014-04-10 13:56 ` Vitaliy Tomin
2014-04-10 13:59 ` Andrew Cooper
2014-04-10 14:33 ` Jan Beulich
2014-04-10 15:21 ` Vitaliy Tomin
2014-04-10 15:23 ` Andrew Cooper
2014-04-10 15:34 ` Vitaliy Tomin
2014-04-10 15:39 ` Andrew Cooper
[not found] ` <CABPT1LuxW3cLrF74SN5FV41R6tGX6eq-5i2U7Tb712UDHStS7w@mail.gmail.com>
2014-04-10 15:59 ` Andrew Cooper
2014-04-11 11:57 ` Vitaliy Tomin
2014-04-11 13:30 ` Jan Beulich
2014-05-03 15:43 ` Vitaliy Tomin
2014-05-05 11:06 ` Andrew Cooper
2014-05-05 11:24 ` Jan Beulich
2014-05-05 15:36 ` Vitaliy Tomin
2014-05-05 15:41 ` Jan Beulich
2014-04-08 13:07 ` George Dunlap
-- strict thread matches above, loose matches on Subject: below --
2013-11-02 9:51 Vitaliy Tomin
2014-04-02 14:44 ` George Dunlap
2014-04-07 14:50 ` Vitaliy Tomin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).