* dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 failed with error -110" [not found] ` <fc.011fc823e66acbd03b9aca005d0d88ff.e66acbd5@estone.ca> @ 2014-05-16 8:58 ` Ian Campbell 2014-05-16 10:08 ` Jan Beulich 0 siblings, 1 reply; 24+ messages in thread From: Ian Campbell @ 2014-05-16 8:58 UTC (permalink / raw) To: Mike Egglestone, 748052; +Cc: xen-devel [-- Attachment #1: Type: text/plain, Size: 2148 bytes --] (copying xen-devel, full logs are at bugs.debian.org/748052, this is Debian Jessie, Xen 4.3.0 and Linux 3.13 Mike also reported that Debian Wheezy Xen 4.1.4 didn't work either, not clear which kernel that was with though, Wheezy's 3.2 or Jessie's 3.13) On Thu, 2014-05-15 at 10:11 -0700, Mike Egglestone wrote: > Here are some results with (now) the latest BIOS version 41. (was > version 35) > This is a fresh new install of Debian "Testing" non production server. > Just wanted to run some test domU's. > Changing USB ports, no effect. I even tried a different USB keyboard. > :) > No PS2 ports on Motherboard. > Booting into NONXEN: > root@xen-3:~# dmesg [...] > Booting into XEN: > (Did I do this correctly?) You did in the follow up. > root@xen-3:~# xl dmesg [...] > root@xen-3:~# dmesg [...] I've attached these as x (xen dom0 Linux dmesg) and nx (non-xen Linux dmesg) for easy diffing (I also stripped the kernel timestamps off to reduce the noise). I also attached xdmesg (Xen's own dmesg) from your next mail. The interesting difference seems to be that the dom0 dmesg under Xen contains: ehci-pci 0000:00:1d.0: can't setup: -110 ehci-pci 0000:00:1d.0: USB bus 2 deregistered ehci-pci 0000:00:1d.0: init 0000:00:1d.0 fail, -110 ehci-pci: probe of 0000:00:1d.0 failed with error -110 and since it doesn't see the controller it doesn't see the devices on that controller. There is another controller but given that it contains "American Megatrends, Inc. Virtual Keyboard and Mouse" I expect it is an imaginary firmware one and hence not much use. There is also a smattering of xen: registering gsi 20 triggering 0 polarity 1 Already setup the GSI :20 (four times for GSI16, once for 20 and twice for 22). The contents of /proc/interrupts under native might tell you what those other interrupts are... So it seems like dom0 is unable to (correctly) bind to some hardware interrupts. I wonder if these messages from Xen's dmesg are relevant. (XEN) Not enabling x2APIC: depends on iommu_supports_eim. (XEN) I/O virtualisation disabled (XEN) Enabled directed EOI with ioapic_ack_old on! Ian. [-- Attachment #2: x --] [-- Type: text/plain, Size: 63191 bytes --] root@xen-3:~# lsusb Bus 001 Device 003: ID 046b:ff10 American Megatrends, Inc. Virtual Keyboard and Mouse Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@xen-3:~# [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Debian 3.13.10-1 (2014-04-15) [ 0.000000] Command line: placeholder root=/dev/md0 ro loglvl=all quiet [ 0.000000] Freeing 9b-100 pfn range: 101 pages freed [ 0.000000] 1-1 mapping on 9b->100 [ 0.000000] Freeing ab9a7-bba28 pfn range: 65665 pages freed [ 0.000000] 1-1 mapping on ab9a7->bba28 [ 0.000000] Freeing bc480-bc5b6 pfn range: 310 pages freed [ 0.000000] 1-1 mapping on bc480->bc5b6 [ 0.000000] Freeing beadd-beaee pfn range: 17 pages freed [ 0.000000] 1-1 mapping on beadd->beaee [ 0.000000] Freeing bed27-befff pfn range: 728 pages freed [ 0.000000] 1-1 mapping on bed27->befff [ 0.000000] Freeing bf000-100000 pfn range: 266240 pages freed [ 0.000000] 1-1 mapping on bf000->100000 [ 0.000000] Released 333061 pages of unused memory [ 0.000000] Set 333061 page(s) to 1-1 mapping [ 0.000000] Populating 1dfa84-230f89 pfn range: 333061 pages added [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x00000000ab9a6fff] usable [ 0.000000] Xen: [mem 0x00000000ab9a7000-0x00000000bba27fff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bba28000-0x00000000bc47ffff] usable [ 0.000000] Xen: [mem 0x00000000bc480000-0x00000000bc5b5fff] reserved [ 0.000000] Xen: [mem 0x00000000bc5b6000-0x00000000beadcfff] usable [ 0.000000] Xen: [mem 0x00000000beadd000-0x00000000beaedfff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000bed26fff] usable [ 0.000000] Xen: [mem 0x00000000bed27000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000befff000-0x00000000beffffff] usable [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x000000023fffffff] usable [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation S1200BTL/S1200BTL, BIOS S1200BT.86B.02.00.0041.120520121743 12/05/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x230c00000-0x230dfffff] [ 0.000000] [mem 0x230c00000-0x230dfffff] page 4k [ 0.000000] BRK [0x01ab9000, 0x01ab9fff] PGTABLE [ 0.000000] BRK [0x01aba000, 0x01abafff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x230000000-0x230bfffff] [ 0.000000] [mem 0x230000000-0x230bfffff] page 4k [ 0.000000] BRK [0x01abb000, 0x01abbfff] PGTABLE [ 0.000000] BRK [0x01abc000, 0x01abcfff] PGTABLE [ 0.000000] BRK [0x01abd000, 0x01abdfff] PGTABLE [ 0.000000] BRK [0x01abe000, 0x01abefff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x200000000-0x22fffffff] [ 0.000000] [mem 0x200000000-0x22fffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x00100000-0xab9a6fff] [ 0.000000] [mem 0x00100000-0xab9a6fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbba28000-0xbc47ffff] [ 0.000000] [mem 0xbba28000-0xbc47ffff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbc5b6000-0xbeadcfff] [ 0.000000] [mem 0xbc5b6000-0xbeadcfff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbeaee000-0xbed26fff] [ 0.000000] [mem 0xbeaee000-0xbed26fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbefff000-0xbeffffff] [ 0.000000] [mem 0xbefff000-0xbeffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x230e00000-0x23fffffff] [ 0.000000] [mem 0x230e00000-0x23fffffff] page 4k [ 0.000000] RAMDISK: [mem 0x01ebc000-0x045ebfff] [ 0.000000] ACPI: RSDP 00000000000f0410 000024 (v02 INTEL) [ 0.000000] ACPI: XSDT 00000000beffde18 0000AC (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: FACP 00000000beffcd98 0000F4 (v04 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: DSDT 00000000befee018 00CE48 (v02 INTEL S1200BTL 00000000 INTL 20100331) [ 0.000000] ACPI: FACS 00000000beffdd40 000040 [ 0.000000] ACPI: APIC 00000000beffb698 000652 (v03 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: SPMI 00000000beffec98 000040 (v05 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: MCFG 00000000beffec18 00003C (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: WDDT 00000000beffef18 000040 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: HPET 00000000beffee98 000038 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: SSDT 00000000befeb018 0010A8 (v02 INTEL S1200BTL 00001000 INTL 20100331) [ 0.000000] ACPI: BOOT 00000000beffee18 000028 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: SSDT 00000000befe7018 000A92 (v02 INTEL S1200BTL 00003000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000befea598 00054D (v01 INTEL S1200BTL 00001000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000beffdb18 000069 (v01 INTEL S1200BTL 00001000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000befe9e18 00017B (v02 INTEL S1200BTL 00002000 INTL 20100331) [ 0.000000] ACPI: XMAR 00000000befe8f18 000078 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: HEST 00000000beffcf18 0000A8 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 00000000beffed98 000030 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 00000000befe8c98 000230 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 00000000beffc918 000130 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff] [ 0.000000] NODE_DATA [mem 0x230f84000-0x230f88fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x23fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009afff] [ 0.000000] node 0: [mem 0x00100000-0xab9a6fff] [ 0.000000] node 0: [mem 0xbba28000-0xbc47ffff] [ 0.000000] node 0: [mem 0xbc5b6000-0xbeadcfff] [ 0.000000] node 0: [mem 0xbeaee000-0xbed26fff] [ 0.000000] node 0: [mem 0xbefff000-0xbeffffff] [ 0.000000] node 0: [mem 0x100000000-0x23fffffff] [ 0.000000] On node 0 totalpages: 2026234 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3994 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9728 pages used for memmap [ 0.000000] DMA32 zone: 711520 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: X2APIC (apic_id[0x00] uid[0x00] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x01] uid[0x01] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x02] uid[0x02] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x03] uid[0x03] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x04] uid[0x04] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x05] uid[0x05] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x06] uid[0x06] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x07] uid[0x07] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x08] uid[0x08] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x09] uid[0x09] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0a] uid[0x0a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0b] uid[0x0b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0c] uid[0x0c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0d] uid[0x0d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0e] uid[0x0e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0f] uid[0x0f] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x10] uid[0x10] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x11] uid[0x11] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x12] uid[0x12] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x13] uid[0x13] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x14] uid[0x14] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x15] uid[0x15] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x16] uid[0x16] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x17] uid[0x17] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x18] uid[0x18] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x19] uid[0x19] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1a] uid[0x1a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1b] uid[0x1b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1c] uid[0x1c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1d] uid[0x1d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1e] uid[0x1e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1f] uid[0x1f] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x20] uid[0x20] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x21] uid[0x21] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x22] uid[0x22] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x23] uid[0x23] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x24] uid[0x24] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x25] uid[0x25] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x26] uid[0x26] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x27] uid[0x27] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x28] uid[0x28] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x29] uid[0x29] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2a] uid[0x2a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2b] uid[0x2b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2c] uid[0x2c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2d] uid[0x2d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2e] uid[0x2e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2f] uid[0x2f] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x30] uid[0x30] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x31] uid[0x31] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x32] uid[0x32] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x33] uid[0x33] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x34] uid[0x34] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x35] uid[0x35] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x36] uid[0x36] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x37] uid[0x37] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x38] uid[0x38] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x39] uid[0x39] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3a] uid[0x3a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3b] uid[0x3b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3c] uid[0x3c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3d] uid[0x3d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3e] uid[0x3e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3f] uid[0x3f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x21] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x22] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x23] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x24] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x25] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x26] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x27] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x28] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x29] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x30] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x31] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x32] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x33] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x34] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x35] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x36] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x37] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x38] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x39] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 128 CPUs, 124 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xab9a7000-0xbba27fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc480000-0xbc5b5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbeadd000-0xbeaedfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbed27000-0xbeddffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbede0000-0xbefdffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbefe0000-0xbeffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed18fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed19000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.3.0 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:128 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880226800000 s85824 r8192 d20672 u131072 [ 0.000000] pcpu-alloc: s85824 r8192 d20672 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 000 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 [ 0.000000] pcpu-alloc: [0] 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 [ 0.000000] pcpu-alloc: [0] 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 [ 0.000000] pcpu-alloc: [0] 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 [ 0.000000] pcpu-alloc: [0] 064 065 066 067 068 069 070 071 072 073 074 075 076 077 078 079 [ 0.000000] pcpu-alloc: [0] 080 081 082 083 084 085 086 087 088 089 090 091 092 093 094 095 [ 0.000000] pcpu-alloc: [0] 096 097 098 099 100 101 102 103 104 105 106 107 108 109 110 111 [ 0.000000] pcpu-alloc: [0] 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 [ 1.916116] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1998509 [ 1.916118] Policy zone: Normal [ 1.916119] Kernel command line: placeholder root=/dev/md0 ro loglvl=all quiet [ 1.916301] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 1.916336] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 1.945423] software IO TLB [mem 0x222800000-0x226800000] (64MB) mapped at [ffff880222800000-ffff8802267fffff] [ 1.974910] Memory: 7582480K/8104936K available (4811K kernel code, 693K rwdata, 1620K rodata, 984K init, 952K bss, 522456K reserved) [ 1.974962] Hierarchical RCU implementation. [ 1.974963] RCU dyntick-idle grace-period acceleration is enabled. [ 1.974964] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 1.974968] NR_IRQS:33024 nr_irqs:712 16 [ 1.975018] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 1.975020] xen: registering gsi 9 triggering 0 polarity 0 [ 1.975029] xen: --> pirq=9 -> irq=9 (gsi=9) [ 1.975048] xen: acpi sci 9 [ 1.975050] xen: --> pirq=1 -> irq=1 (gsi=1) [ 1.975052] xen: --> pirq=2 -> irq=2 (gsi=2) [ 1.975054] xen: --> pirq=3 -> irq=3 (gsi=3) [ 1.975055] xen: --> pirq=4 -> irq=4 (gsi=4) [ 1.975056] xen: --> pirq=5 -> irq=5 (gsi=5) [ 1.975058] xen: --> pirq=6 -> irq=6 (gsi=6) [ 1.975060] xen: --> pirq=7 -> irq=7 (gsi=7) [ 1.975061] xen: --> pirq=8 -> irq=8 (gsi=8) [ 1.975063] xen: --> pirq=10 -> irq=10 (gsi=10) [ 1.975064] xen: --> pirq=11 -> irq=11 (gsi=11) [ 1.975066] xen: --> pirq=12 -> irq=12 (gsi=12) [ 1.975068] xen: --> pirq=13 -> irq=13 (gsi=13) [ 1.975071] xen: --> pirq=14 -> irq=14 (gsi=14) [ 1.975072] xen: --> pirq=15 -> irq=15 (gsi=15) [ 1.983593] Console: colour VGA+ 80x25 [ 1.983674] console [tty0] enabled [ 1.983696] Xen: using vcpuop timer interface [ 1.983699] installing Xen timer for CPU 0 [ 1.983717] tsc: Detected 3292.636 MHz processor [ 1.983720] Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.27 BogoMIPS (lpj=13170544) [ 1.983722] pid_max: default: 32768 minimum: 301 [ 1.983740] Security Framework initialized [ 1.983743] AppArmor: AppArmor disabled by boot time parameter [ 1.983744] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.984535] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 1.986622] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 1.987486] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 1.987499] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 1.987681] Initializing cgroup subsys memory [ 1.987686] Initializing cgroup subsys devices [ 1.987687] Initializing cgroup subsys freezer [ 1.987688] Initializing cgroup subsys blkio [ 1.987689] Initializing cgroup subsys perf_event [ 1.987733] CPU: Physical Processor ID: 0 [ 1.987734] CPU: Processor Core ID: 0 [ 1.988023] mce: CPU supports 2 MCE banks [ 1.988036] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 1.988036] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 1.988036] tlb_flushall_shift: 2 [ 1.988102] Freeing SMP alternatives memory: 20K (ffffffff819a5000 - ffffffff819aa000) [ 1.988917] ACPI: Core revision 20131115 [ 1.992975] ACPI: All ACPI Tables successfully acquired [ 1.995293] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 1.995446] NMI watchdog: disabled (cpu0): hardware events not enabled [ 1.995503] installing Xen timer for CPU 1 [ 1.996003] installing Xen timer for CPU 2 [ 1.996529] installing Xen timer for CPU 3 [ 1.997006] x86: Booted up 1 node, 4 CPUs [ 1.997287] devtmpfs: initialized [ 1.999255] PM: Registering ACPI NVS region [mem 0xab9a7000-0xbba27fff] (268963840 bytes) [ 2.002691] PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 2.002827] xen:grant_table: Grant tables using version 2 layout [ 2.002837] Grant table initialized [ 2.002876] NET: Registered protocol family 16 [ 2.003070] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 2.003072] ACPI: bus type PCI registered [ 2.003074] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 2.003189] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 2.003191] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 2.011415] PCI: Using configuration type 1 for base access [ 2.011926] bio: create slab <bio-0> at 0 [ 2.012043] ACPI: Added _OSI(Module Device) [ 2.012044] ACPI: Added _OSI(Processor Device) [ 2.012045] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.012046] ACPI: Added _OSI(Processor Aggregator Device) [ 2.014090] ACPI: Executed 1 blocks of module-level executable AML code [ 2.036501] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 2.036904] ACPI Error: [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 2.036908] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PDC] (Node ffff8802218e5da8), AE_NOT_FOUND (20131115/psparse-536) [ 2.037051] ACPI: SSDT 00000000bedbad98 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 2.037284] ACPI: Dynamic OEM Table Load: [ 2.037286] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 2.049109] ACPI: Interpreter enabled [ 2.049117] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 2.049123] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580) [ 2.049127] ACPI: (supports S0 S1 S3 S5) [ 2.049128] ACPI: Using IOAPIC for interrupt routing [ 2.049165] HEST: Table parsing has been initialized. [ 2.049167] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.049347] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 2.053416] ACPI: Power Resource [FN00] (off) [ 2.053469] ACPI: Power Resource [FN01] (off) [ 2.053519] ACPI: Power Resource [FN02] (off) [ 2.053567] ACPI: Power Resource [FN03] (off) [ 2.053618] ACPI: Power Resource [FN04] (off) [ 2.054005] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 2.054009] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 2.054298] acpi PNP0A08:00: _OSC: platform does not support [AER] [ 2.054618] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 2.055102] PCI host bridge to bus 0000:00 [ 2.055104] pci_bus 0000:00: root bus resource [bus 00-3e] [ 2.055105] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 2.055107] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 2.055108] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 2.055109] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff] [ 2.055110] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 2.055111] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 2.055112] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 2.055113] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 2.055114] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 2.055116] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 2.055117] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff] [ 2.055118] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 2.055128] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 [ 2.055315] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 2.055356] pci 0000:00:19.0: reg 0x10: [mem 0xc2500000-0xc251ffff] [ 2.055374] pci 0000:00:19.0: reg 0x14: [mem 0xc2570000-0xc2570fff] [ 2.055391] pci 0000:00:19.0: reg 0x18: [io 0x5040-0x505f] [ 2.055542] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 2.055590] pci 0000:00:19.0: System wakeup disabled by ACPI [ 2.055638] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 2.055680] pci 0000:00:1a.0: reg 0x10: [mem 0xc2560000-0xc25603ff] [ 2.055864] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.055923] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 2.055967] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 2.056139] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.056193] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 2.056241] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 2.056413] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 2.056466] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 2.056505] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400 [ 2.056677] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 2.056729] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 2.056786] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 2.056825] pci 0000:00:1d.0: reg 0x10: [mem 0xc2550000-0xc25503ff] [ 2.057010] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.057069] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 2.057109] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.057259] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 2.057298] pci 0000:00:1f.0: [8086:1c54] type 00 class 0x060100 [ 2.057560] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 2.057604] pci 0000:00:1f.2: reg 0x10: [io 0x5090-0x5097] [ 2.057622] pci 0000:00:1f.2: reg 0x14: [io 0x5080-0x5083] [ 2.057639] pci 0000:00:1f.2: reg 0x18: [io 0x5070-0x5077] [ 2.057656] pci 0000:00:1f.2: reg 0x1c: [io 0x5060-0x5063] [ 2.057674] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f] [ 2.057690] pci 0000:00:1f.2: reg 0x24: [mem 0xc2540000-0xc25407ff] [ 2.057808] pci 0000:00:1f.2: PME# supported from D3hot [ 2.057886] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 2.057920] pci 0000:00:1f.3: reg 0x10: [mem 0xc2530000-0xc25300ff 64bit] [ 2.057968] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f] [ 2.058164] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 2.058170] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 2.058176] pci 0000:00:1c.0: bridge window [mem 0xc1900000-0xc22fffff] [ 2.058187] pci 0000:00:1c.0: bridge window [mem 0xc2600000-0xc2ffffff 64bit pref] [ 2.058349] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 [ 2.058393] pci 0000:02:00.0: reg 0x10: [mem 0xc2400000-0xc241ffff] [ 2.058452] pci 0000:02:00.0: reg 0x18: [io 0x3000-0x301f] [ 2.058483] pci 0000:02:00.0: reg 0x1c: [mem 0xc2420000-0xc2423fff] [ 2.058744] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 2.058817] pci 0000:02:00.0: System wakeup disabled by ACPI [ 2.064973] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 2.064980] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 2.064986] pci 0000:00:1c.4: bridge window [mem 0xc2400000-0xc24fffff] [ 2.065143] pci 0000:03:00.0: [102b:0522] type 00 class 0x030000 [ 2.065177] pci 0000:03:00.0: reg 0x10: [mem 0xc0000000-0xc0ffffff] [ 2.065201] pci 0000:03:00.0: reg 0x14: [mem 0xc1810000-0xc1813fff] [ 2.065225] pci 0000:03:00.0: reg 0x18: [mem 0xc1000000-0xc17fffff] [ 2.065315] pci 0000:03:00.0: reg 0x30: [mem 0xc1800000-0xc180ffff pref] [ 2.065470] pci 0000:03:00.0: System wakeup disabled by ACPI [ 2.073106] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 2.073118] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc18fffff] [ 2.073210] pci 0000:04:00.0: [8086:100e] type 00 class 0x020000 [ 2.073248] pci 0000:04:00.0: reg 0x10: [mem 0xc2340000-0xc235ffff] [ 2.073265] pci 0000:04:00.0: reg 0x14: [mem 0xc2320000-0xc233ffff] [ 2.073283] pci 0000:04:00.0: reg 0x18: [io 0x2000-0x203f] [ 2.073349] pci 0000:04:00.0: reg 0x30: [mem 0xc2300000-0xc231ffff pref] [ 2.073436] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 2.073561] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 2.073566] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] [ 2.073572] pci 0000:00:1e.0: bridge window [mem 0xc2300000-0xc23fffff] [ 2.073582] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 2.073584] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 2.073585] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 2.073586] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode) [ 2.073587] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 2.073588] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 2.073589] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 2.073591] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 2.073592] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 2.073593] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 2.073594] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode) [ 2.073595] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) [ 2.073649] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 2.074047] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.074089] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.074128] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.074167] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.074205] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 10 11 12 14 15) [ 2.074243] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.074281] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 2.074319] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15) [ 2.074539] ACPI: Enabled 7 GPEs in block 00 to 3F [ 2.074543] ACPI: \_SB_.PCI0: notify handler is installed [ 2.074578] Found 1 acpi root devices [ 2.074604] xen:balloon: Initialising balloon driver [ 2.075334] xen_balloon: Initialising balloon driver [ 2.075473] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 2.075474] vgaarb: loaded [ 2.075475] vgaarb: bridge control possible 0000:03:00.0 [ 2.075506] PCI: Using ACPI for IRQ routing [ 2.079771] PCI: pci_cache_line_size set to 64 bytes [ 2.079846] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 2.079848] e820: reserve RAM buffer [mem 0xab9a7000-0xabffffff] [ 2.079849] e820: reserve RAM buffer [mem 0xbc480000-0xbfffffff] [ 2.079850] e820: reserve RAM buffer [mem 0xbeadd000-0xbfffffff] [ 2.079851] e820: reserve RAM buffer [mem 0xbed27000-0xbfffffff] [ 2.079852] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff] [ 2.079966] Switched to clocksource xen [ 2.081013] pnp: PnP ACPI init [ 2.081019] ACPI: bus type PNP registered [ 2.081052] pnp 00:00: [dma 4] [ 2.081065] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 2.081078] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 2.081140] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 2.081146] xen: registering gsi 13 triggering 1 polarity 0 [ 2.081180] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 2.081208] system 00:04: [io 0x0680-0x069f] has been reserved [ 2.081210] system 00:04: [io 0xffff] has been reserved [ 2.081211] system 00:04: [io 0xffff] has been reserved [ 2.081212] system 00:04: [io 0xffff] has been reserved [ 2.081214] system 00:04: [io 0x0400-0x0453] could not be reserved [ 2.081215] system 00:04: [io 0x0458-0x047f] has been reserved [ 2.081216] system 00:04: [io 0x0500-0x057f] has been reserved [ 2.081218] system 00:04: [io 0x164e-0x164f] has been reserved [ 2.081219] system 00:04: [io 0x0900-0x090f] has been reserved [ 2.081220] system 00:04: [io 0x0295-0x0296] has been reserved [ 2.081222] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.081226] xen: registering gsi 8 triggering 1 polarity 0 [ 2.081250] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.081279] system 00:06: [io 0x0454-0x0457] has been reserved [ 2.081281] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 2.081441] pnp 00:07: Plug and Play ACPI device, IDs IPI0001 (active) [ 2.081555] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.081557] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 2.081558] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.081560] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.081561] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 2.081562] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.081563] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved [ 2.081565] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 2.081566] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved [ 2.081567] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 2.081569] system 00:08: [mem 0xc2590000-0xc2590fff] has been reserved [ 2.081570] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.081739] system 00:09: [mem 0x00000000-0x0009cfff] could not be reserved [ 2.081740] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.081773] pnp: PnP ACPI: found 10 devices [ 2.081774] ACPI: bus type PNP unregistered [ 2.086657] PM-Timer failed consistency check (0xffffff) - aborting. [ 2.086721] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 2.086725] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 2.086733] pci 0000:00:1c.0: bridge window [mem 0xc1900000-0xc22fffff] [ 2.086739] pci 0000:00:1c.0: bridge window [mem 0xc2600000-0xc2ffffff 64bit pref] [ 2.086749] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 2.086753] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 2.086761] pci 0000:00:1c.4: bridge window [mem 0xc2400000-0xc24fffff] [ 2.086776] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 2.086784] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc18fffff] [ 2.086799] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 2.086802] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] [ 2.086810] pci 0000:00:1e.0: bridge window [mem 0xc2300000-0xc23fffff] [ 2.086823] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.086825] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.086826] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.086827] pci_bus 0000:00: resource 7 [mem 0x000cc000-0x000cffff] [ 2.086828] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000d3fff] [ 2.086829] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff] [ 2.086830] pci_bus 0000:00: resource 10 [mem 0x000d8000-0x000dbfff] [ 2.086831] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000dffff] [ 2.086832] pci_bus 0000:00: resource 12 [mem 0x000e0000-0x000e3fff] [ 2.086833] pci_bus 0000:00: resource 13 [mem 0x000e4000-0x000e7fff] [ 2.086834] pci_bus 0000:00: resource 14 [mem 0xc0000000-0xfeafffff] [ 2.086835] pci_bus 0000:00: resource 15 [mem 0xfed40000-0xfed44fff] [ 2.086837] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 2.086838] pci_bus 0000:01: resource 1 [mem 0xc1900000-0xc22fffff] [ 2.086839] pci_bus 0000:01: resource 2 [mem 0xc2600000-0xc2ffffff 64bit pref] [ 2.086840] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 2.086841] pci_bus 0000:02: resource 1 [mem 0xc2400000-0xc24fffff] [ 2.086842] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc18fffff] [ 2.086843] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 2.086845] pci_bus 0000:04: resource 1 [mem 0xc2300000-0xc23fffff] [ 2.086846] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 2.086847] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 2.086848] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 2.086849] pci_bus 0000:04: resource 7 [mem 0x000cc000-0x000cffff] [ 2.086850] pci_bus 0000:04: resource 8 [mem 0x000d0000-0x000d3fff] [ 2.086851] pci_bus 0000:04: resource 9 [mem 0x000d4000-0x000d7fff] [ 2.086852] pci_bus 0000:04: resource 10 [mem 0x000d8000-0x000dbfff] [ 2.086853] pci_bus 0000:04: resource 11 [mem 0x000dc000-0x000dffff] [ 2.086854] pci_bus 0000:04: resource 12 [mem 0x000e0000-0x000e3fff] [ 2.086855] pci_bus 0000:04: resource 13 [mem 0x000e4000-0x000e7fff] [ 2.086856] pci_bus 0000:04: resource 14 [mem 0xc0000000-0xfeafffff] [ 2.086857] pci_bus 0000:04: resource 15 [mem 0xfed40000-0xfed44fff] [ 2.086924] NET: Registered protocol family 2 [ 2.087094] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 2.087303] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.087511] TCP: Hash tables configured (established 65536 bind 65536) [ 2.087530] TCP: reno registered [ 2.087546] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 2.087585] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 2.087664] NET: Registered protocol family 1 [ 2.087722] xen: registering gsi 22 triggering 0 polarity 1 [ 2.087731] xen: --> pirq=22 -> irq=22 (gsi=22) [ 2.100161] xen: registering gsi 20 triggering 0 polarity 1 [ 2.100166] xen: --> pirq=20 -> irq=20 (gsi=20) [ 2.118150] pci 0000:03:00.0: Boot video device [ 2.118159] PCI: CLS 64 bytes, default 64 [ 2.118192] Unpacking initramfs... [ 2.144855] Freeing initrd memory: 40128K (ffff880001ebc000 - ffff8800045ec000) [ 2.144981] Simple Boot Flag at 0x4f set to 0x1 [ 2.145317] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 2.145560] audit: initializing netlink socket (disabled) [ 2.145575] type=2000 audit(1400171707.139:1): initialized [ 2.155216] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.155472] VFS: Disk quotas dquot_6.5.2 [ 2.155490] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.155544] msgmni has been set to 14887 [ 2.155769] alg: No test for stdrng (krng) [ 2.155791] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.155822] io scheduler noop registered [ 2.155823] io scheduler deadline registered [ 2.155835] io scheduler cfq registered (default) [ 2.155943] xen: registering gsi 16 triggering 0 polarity 1 [ 2.155954] xen: --> pirq=16 -> irq=16 (gsi=16) [ 2.156190] xen: registering gsi 16 triggering 0 polarity 1 [ 2.156192] Already setup the GSI :16 [ 2.156374] xen: registering gsi 16 triggering 0 polarity 1 [ 2.156375] Already setup the GSI :16 [ 2.156559] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 2.156566] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 2.156591] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 2.156592] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 2.156598] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 2.156622] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 2.156623] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 2.156629] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 2.156636] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.156668] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 1c10 ss_vid 8086 ss_did 7270 [ 2.156701] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded [ 2.156703] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.156723] intel_idle: MWAIT substates: 0x1120 [ 2.156724] intel_idle: v0.4 model 0x3A [ 2.156725] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.156748] intel_idle: intel_idle yielding to none [ 2.156794] ERST: Error Record Serialization Table (ERST) support is initialized. [ 2.156799] pstore: Registered erst as persistent store backend [ 2.156933] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 2.157224] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.157528] hpet_acpi_add: no address or irqs in _CRS [ 2.157539] Linux agpgart interface v0.103 [ 2.157590] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 3.203091] i8042: No controller found [ 3.203297] mousedev: PS/2 mouse device common for all mice [ 3.203330] rtc_cmos 00:05: RTC can wake from S4 [ 3.203501] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 3.203554] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram [ 3.203561] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> [ 3.203561] AMD IOMMUv2 functionality not available on this system [ 3.203655] TCP: cubic registered [ 3.203754] NET: Registered protocol family 10 [ 3.203889] mip6: Mobile IPv6 [ 3.203891] NET: Registered protocol family 17 [ 3.203893] mpls_gso: MPLS GSO support [ 3.204053] registered taskstats version 1 [ 3.204531] rtc_cmos 00:05: setting system clock to 2014-05-15 16:35:07 UTC (1400171707) [ 3.204557] PM: Hibernation image not present or could not be loaded. [ 3.204761] Freeing unused kernel memory: 984K (ffffffff818af000 - ffffffff819a5000) [ 3.204762] Write protecting the kernel read-only data: 8192k [ 3.206100] Freeing unused kernel memory: 1324K (ffff8800014b5000 - ffff880001600000) [ 3.206234] Freeing unused kernel memory: 428K (ffff880001795000 - ffff880001800000) [ 3.221312] systemd-udevd[71]: starting version 204 [ 3.237944] ACPI: bus type USB registered [ 3.237963] usbcore: registered new interface driver usbfs [ 3.237968] usbcore: registered new interface driver hub [ 3.242389] usbcore: registered new device driver usb [ 3.242636] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.242748] ehci-pci: EHCI PCI platform driver [ 3.242829] xen: registering gsi 22 triggering 0 polarity 1 [ 3.242833] Already setup the GSI :22 [ 3.242867] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.242871] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.242890] ehci-pci 0000:00:1a.0: debug port 2 [ 3.244581] pps_core: LinuxPPS API ver. 1 registered [ 3.244582] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 3.244812] PTP clock support registered [ 3.245302] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 3.245303] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 3.246801] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 3.246847] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc2560000 [ 3.256290] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.256330] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.256332] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.256333] usb usb1: Product: EHCI Host Controller [ 3.256334] usb usb1: Manufacturer: Linux 3.13-1-amd64 ehci_hcd [ 3.256335] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.256426] hub 1-0:1.0: USB hub found [ 3.256433] hub 1-0:1.0: 2 ports detected [ 3.256571] xen: registering gsi 20 triggering 0 polarity 1 [ 3.256574] Already setup the GSI :20 [ 3.256603] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.256608] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.256630] ehci-pci 0000:00:1d.0: debug port 2 [ 3.257883] ACPI: Fan [FAN0] (off) [ 3.257910] ACPI: Fan [FAN1] (off) [ 3.257931] ACPI: Fan [FAN2] (off) [ 3.257949] ACPI: Fan [FAN3] (off) [ 3.257967] ACPI: Fan [FAN4] (off) [ 3.261898] ehci-pci 0000:00:1d.0: can't setup: -110 [ 3.261989] ehci-pci 0000:00:1d.0: USB bus 2 deregistered [ 3.262042] ehci-pci 0000:00:1d.0: init 0000:00:1d.0 fail, -110 [ 3.262139] ehci-pci: probe of 0000:00:1d.0 failed with error -110 [ 3.262213] xen: registering gsi 19 triggering 0 polarity 1 [ 3.262226] xen: --> pirq=19 -> irq=19 (gsi=19) [ 3.262357] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.264434] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.264435] ACPI: Thermal Zone [TZ00] (28 C) [ 3.264563] thermal LNXTHERM:01: registered as thermal_zone1 [ 3.264564] ACPI: Thermal Zone [TZ01] (30 C) [ 3.266045] SCSI subsystem initialized [ 3.268760] libata version 3.00 loaded. [ 3.277886] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3.277887] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3.277968] xen: registering gsi 16 triggering 0 polarity 1 [ 3.277971] Already setup the GSI :16 [ 3.527296] e1000e 0000:00:19.0 eth0: registered PHC clock [ 3.527299] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:55:62:65 [ 3.527300] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.527333] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF [ 3.527362] ahci 0000:00:1f.2: version 3.0 [ 3.527387] xen: registering gsi 16 triggering 0 polarity 1 [ 3.527389] Already setup the GSI :16 [ 3.527432] xen: registering gsi 21 triggering 0 polarity 1 [ 3.527443] xen: --> pirq=21 -> irq=21 (gsi=21) [ 3.527577] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.540151] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode [ 3.540154] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 3.564418] scsi0 : ahci [ 3.564552] scsi1 : ahci [ 3.564633] scsi2 : ahci [ 3.564692] scsi3 : ahci [ 3.564739] scsi4 : ahci [ 3.564789] scsi5 : ahci [ 3.564823] ata1: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540100 irq 71 [ 3.564827] ata2: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540180 irq 71 [ 3.564829] ata3: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540200 irq 71 [ 3.564832] ata4: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540280 irq 71 [ 3.564832] ata5: DUMMY [ 3.564833] ata6: DUMMY [ 3.569259] e1000 0000:04:00.0 eth1: (PCI:33MHz:32-bit) 00:0e:0c:7f:a5:ce [ 3.569262] e1000 0000:04:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 3.572052] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.645075] e1000e 0000:02:00.0 eth2: registered PHC clock [ 3.645077] e1000e 0000:02:00.0 eth2: (PCI Express:2.5GT/s:Width x1) 00:1e:67:55:62:64 [ 3.645078] e1000e 0000:02:00.0 eth2: Intel(R) PRO/1000 Network Connection [ 3.645163] e1000e 0000:02:00.0 eth2: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 3.704497] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.704502] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.704722] hub 1-1:1.0: USB hub found [ 3.704823] hub 1-1:1.0: 6 ports detected [ 3.884067] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.884099] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.884116] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.885628] ata3.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 3.885630] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.885639] ata4.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 3.885641] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.885812] ata2.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 3.885814] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.887131] ata4.00: configured for UDMA/133 [ 3.887142] ata3.00: configured for UDMA/133 [ 3.887531] ata2.00: configured for UDMA/133 [ 3.892046] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.893803] ata1.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 3.893808] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.895698] ata1.00: configured for UDMA/133 [ 3.895882] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 3.896138] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 3.896329] scsi 2:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 3.896460] scsi 3:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 3.901809] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.901814] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.901821] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.901837] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.901838] sd 0:0:0:0: [sda] Write Protect is off [ 3.901840] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.901841] sd 1:0:0:0: [sdb] Write Protect is off [ 3.901842] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.901850] sd 2:0:0:0: [sdc] Write Protect is off [ 3.901852] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.901853] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.901855] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.901868] sd 3:0:0:0: [sdd] Write Protect is off [ 3.901869] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.901892] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.901912] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.912801] sdc: sdc1 sdc2 sdc3 [ 3.912945] sdb: sdb1 sdb2 sdb3 [ 3.913083] sd 2:0:0:0: [sdc] Attached SCSI disk [ 3.913190] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.913216] sdd: sdd1 sdd2 sdd3 [ 3.913440] sd 3:0:0:0: [sdd] Attached SCSI disk [ 3.913996] sda: sda1 sda2 sda3 [ 3.914245] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.916218] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.916258] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.916285] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.916314] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 3.976144] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 4.038652] md: md0 stopped. [ 4.041372] md: bind<sdc1> [ 4.041542] md: bind<sdd1> [ 4.041706] md: bind<sda1> [ 4.041875] md: bind<sdb1> [ 4.042920] md: raid1 personality registered for level 1 [ 4.043180] md/raid1:md0: active with 4 out of 4 mirrors [ 4.043191] md0: detected capacity change from 0 to 998703104 [ 4.043205] RAID1 conf printout: [ 4.043207] --- wd:4 rd:4 [ 4.043208] disk 0, wo:0, o:1, dev:sdb1 [ 4.043209] disk 1, wo:0, o:1, dev:sdc1 [ 4.043210] disk 2, wo:0, o:1, dev:sdd1 [ 4.043211] disk 3, wo:0, o:1, dev:sda1 [ 4.044728] md0: unknown partition table [ 4.048450] random: nonblocking pool is initialized [ 4.062703] md: md1 stopped. [ 4.064437] md: bind<sda2> [ 4.064577] md: bind<sdd2> [ 4.065249] md: bind<sdc2> [ 4.066031] md: bind<sdb2> [ 4.067336] md: raid10 personality registered for level 10 [ 4.067590] md/raid10:md1: active with 4 out of 4 devices [ 4.067602] md1: detected capacity change from 0 to 2004877312 [ 4.067615] RAID10 conf printout: [ 4.067616] --- wd:4 rd:4 [ 4.067617] disk 0, wo:0, o:1, dev:sdb2 [ 4.067617] disk 1, wo:0, o:1, dev:sda2 [ 4.067618] disk 2, wo:0, o:1, dev:sdd2 [ 4.067618] disk 3, wo:0, o:1, dev:sdc2 [ 4.069446] usb 1-1.1: New USB device found, idVendor=046b, idProduct=ff10 [ 4.069451] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.069453] usb 1-1.1: Product: Virtual Keyboard and Mouse [ 4.069455] usb 1-1.1: Manufacturer: American Megatrends Inc. [ 4.069457] usb 1-1.1: SerialNumber: serial [ 4.072158] hidraw: raw HID events driver (C) Jiri Kosina [ 4.073683] usbcore: registered new interface driver usbhid [ 4.073684] usbhid: USB HID core driver [ 4.075564] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input0 [ 4.075607] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.1/input0 [ 4.075701] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input1 [ 4.075763] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.1/input1 [ 4.076398] md1: unknown partition table [ 4.085627] md: md2 stopped. [ 4.086393] md: bind<sdb3> [ 4.086597] md: bind<sdc3> [ 4.086797] md: bind<sdd3> [ 4.086920] md: bind<sda3> [ 4.088275] md/raid10:md2: active with 4 out of 4 devices [ 4.088286] md2: detected capacity change from 0 to 19983761408 [ 4.088300] RAID10 conf printout: [ 4.088303] --- wd:4 rd:4 [ 4.088304] disk 0, wo:0, o:1, dev:sda3 [ 4.088304] disk 1, wo:0, o:1, dev:sdb3 [ 4.088305] disk 2, wo:0, o:1, dev:sdc3 [ 4.088305] disk 3, wo:0, o:1, dev:sdd3 [ 4.100620] md2: unknown partition table [ 4.120931] EXT4-fs (md0): INFO: recovery required on readonly filesystem [ 4.120936] EXT4-fs (md0): write access will be enabled during recovery [ 4.219719] EXT4-fs (md0): recovery complete [ 4.227948] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 4.962001] systemd-udevd[422]: starting version 204 [ 5.159938] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 5.159943] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.159947] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 5.159949] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.159950] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 5.159951] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.159952] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 5.159954] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SI_.SIOR 2 (20131115/utaddress-251) [ 5.159956] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.159956] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.169251] xen: registering gsi 22 triggering 0 polarity 1 [ 5.169255] Already setup the GSI :22 [ 5.169262] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251) [ 5.169265] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.195104] ipmi message handler version 39.2 [ 5.197621] IPMI System Interface driver. [ 5.197635] ipmi_si: probing via ACPI [ 5.197645] ipmi_si 00:07: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0 [ 5.197646] ipmi_si: Adding ACPI-specified kcs state machine [ 5.197655] ipmi_si: probing via SMBIOS [ 5.197656] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 5.197657] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface [ 5.197659] ipmi_si: probing via SPMI [ 5.197659] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0 [ 5.197660] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface [ 5.197661] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 5.238983] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 5.239021] ACPI: Sleep Button [SLPB] [ 5.239049] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 5.239074] ACPI: Power Button [PWRF] [ 5.239978] ACPI Error: [\_PR_.CPU0._CST] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 5.239983] ACPI Error: Method parse/execution failed [\_PR_.CPU1._CST] (Node ffff8802218fedf8), AE_NOT_FOUND (20131115/psparse-536) [ 5.240436] ACPI Error: [\_PR_.CPU0._CST] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 5.240439] ACPI Error: Method parse/execution failed [\_PR_.CPU2._CST] (Node ffff8802218febf0), AE_NOT_FOUND (20131115/psparse-536) [ 5.240537] ACPI Error: [\_PR_.CPU0._CST] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 5.240541] ACPI Error: Method parse/execution failed [\_PR_.CPU3._CST] (Node ffff8802218fec18), AE_NOT_FOUND (20131115/psparse-536) [ 5.240573] Warning: Processor Platform Limit not supported. [ 5.308120] systemd-udevd[461]: renamed network interface eth2 to rename4 [ 5.342206] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 5.375684] iTCO_vendor_support: vendor-support=0 [ 5.376009] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 5.376033] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 5.378460] systemd-udevd[480]: renamed network interface eth1 to eth2 [ 5.388220] ipmi_si 00:07: Found new BMC (man_id: 0x000157, prod_id: 0x0048, dev_id: 0x21) [ 5.388228] ipmi_si 00:07: IPMI kcs interface initialized [ 5.389004] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 5.412563] alg: No test for crc32 (crc32-pclmul) [ 5.420153] systemd-udevd[461]: renamed network interface rename4 to eth1 [ 5.604757] intel_rapl: domain uncore energy ctr 0:0 not working, skip [ 6.076163] EXT4-fs (md0): re-mounted. Opts: (null) [ 6.190184] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro [ 6.342971] loop: module loaded [ 6.704448] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 7.772251] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.772857] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 7.776410] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 7.776582] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 7.815940] xen:xen_evtchn: Event-channel device installed [-- Attachment #3: nx --] [-- Type: text/plain, Size: 64875 bytes --] Bus 002 Device 003: ID 413c:2107 Dell Computer Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 046b:ff10 American Megatrends, Inc. Virtual Keyboard and Mouse Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@xen-3:~# root@xen-3:~# dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Debian 3.13.10-1 (2014-04-15) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=/dev/md0 ro loglvl=all quiet [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ab9a6fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ab9a7000-0x00000000bba27fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bba28000-0x00000000bc47cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc47d000-0x00000000bc5b2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bc5b3000-0x00000000beadcfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000beadd000-0x00000000beaedfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000beaee000-0x00000000bed26fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bed27000-0x00000000beddffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation S1200BTL/S1200BTL, BIOS S1200BT.86B.02.00.0041.120520121743 12/05/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 100000000 mask F00000000 write-back [ 0.000000] 3 base 200000000 mask FC0000000 write-back [ 0.000000] 4 base 0FF800000 mask FFF800000 write-protect [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fc8e0-0x000fc8ef] mapped at [ffff8800000fc8e0] [ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01a9a000, 0x01a9afff] PGTABLE [ 0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE [ 0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23fe00000-0x23fffffff] [ 0.000000] [mem 0x23fe00000-0x23fffffff] page 2M [ 0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fdfffff] [ 0.000000] [mem 0x23c000000-0x23fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff] [ 0.000000] [mem 0x200000000-0x23bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xab9a6fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xab7fffff] page 2M [ 0.000000] [mem 0xab800000-0xab9a6fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbba28000-0xbc47cfff] [ 0.000000] [mem 0xbba28000-0xbbbfffff] page 4k [ 0.000000] [mem 0xbbc00000-0xbc3fffff] page 2M [ 0.000000] [mem 0xbc400000-0xbc47cfff] page 4k [ 0.000000] BRK [0x01a9e000, 0x01a9efff] PGTABLE [ 0.000000] BRK [0x01a9f000, 0x01a9ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbc5b3000-0xbeadcfff] [ 0.000000] [mem 0xbc5b3000-0xbc5fffff] page 4k [ 0.000000] [mem 0xbc600000-0xbe9fffff] page 2M [ 0.000000] [mem 0xbea00000-0xbeadcfff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbeaee000-0xbed26fff] [ 0.000000] [mem 0xbeaee000-0xbed26fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbefff000-0xbeffffff] [ 0.000000] [mem 0xbefff000-0xbeffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x36602000-0x372f8fff] [ 0.000000] ACPI: RSDP 00000000000f0410 000024 (v02 INTEL) [ 0.000000] ACPI: XSDT 00000000beffde18 0000AC (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: FACP 00000000beffcd98 0000F4 (v04 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: DSDT 00000000befee018 00CE48 (v02 INTEL S1200BTL 00000000 INTL 20100331) [ 0.000000] ACPI: FACS 00000000beffdd40 000040 [ 0.000000] ACPI: APIC 00000000beffb698 000652 (v03 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: SPMI 00000000beffec98 000040 (v05 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: MCFG 00000000beffec18 00003C (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: WDDT 00000000beffef18 000040 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: HPET 00000000beffee98 000038 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: SSDT 00000000befeb018 0010A8 (v02 INTEL S1200BTL 00001000 INTL 20100331) [ 0.000000] ACPI: BOOT 00000000beffee18 000028 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: SSDT 00000000befe7018 000A92 (v02 INTEL S1200BTL 00003000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000befea598 00054D (v01 INTEL S1200BTL 00001000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000beffdb18 000069 (v01 INTEL S1200BTL 00001000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000befe9e18 00017B (v02 INTEL S1200BTL 00002000 INTL 20100331) [ 0.000000] ACPI: DMAR 00000000befe8f18 000078 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: HEST 00000000beffcf18 0000A8 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 00000000beffed98 000030 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 00000000befe8c98 000230 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 00000000beffc918 000130 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff] [ 0.000000] NODE_DATA [mem 0x23fff1000-0x23fff5fff] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237800000-ffff88023e7fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x23fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009afff] [ 0.000000] node 0: [mem 0x00100000-0xab9a6fff] [ 0.000000] node 0: [mem 0xbba28000-0xbc47cfff] [ 0.000000] node 0: [mem 0xbc5b3000-0xbeadcfff] [ 0.000000] node 0: [mem 0xbeaee000-0xbed26fff] [ 0.000000] node 0: [mem 0xbefff000-0xbeffffff] [ 0.000000] node 0: [mem 0x100000000-0x23fffffff] [ 0.000000] On node 0 totalpages: 2026234 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3994 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9728 pages used for memmap [ 0.000000] DMA32 zone: 711520 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: X2APIC (apic_id[0x00] uid[0x00] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x01] uid[0x01] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x02] uid[0x02] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x03] uid[0x03] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x04] uid[0x04] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x05] uid[0x05] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x06] uid[0x06] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x07] uid[0x07] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x08] uid[0x08] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x09] uid[0x09] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0a] uid[0x0a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0b] uid[0x0b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0c] uid[0x0c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0d] uid[0x0d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0e] uid[0x0e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0f] uid[0x0f] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x10] uid[0x10] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x11] uid[0x11] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x12] uid[0x12] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x13] uid[0x13] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x14] uid[0x14] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x15] uid[0x15] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x16] uid[0x16] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x17] uid[0x17] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x18] uid[0x18] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x19] uid[0x19] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1a] uid[0x1a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1b] uid[0x1b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1c] uid[0x1c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1d] uid[0x1d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1e] uid[0x1e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1f] uid[0x1f] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x20] uid[0x20] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x21] uid[0x21] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x22] uid[0x22] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x23] uid[0x23] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x24] uid[0x24] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x25] uid[0x25] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x26] uid[0x26] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x27] uid[0x27] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x28] uid[0x28] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x29] uid[0x29] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2a] uid[0x2a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2b] uid[0x2b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2c] uid[0x2c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2d] uid[0x2d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2e] uid[0x2e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2f] uid[0x2f] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x30] uid[0x30] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x31] uid[0x31] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x32] uid[0x32] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x33] uid[0x33] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x34] uid[0x34] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x35] uid[0x35] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x36] uid[0x36] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x37] uid[0x37] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x38] uid[0x38] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x39] uid[0x39] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3a] uid[0x3a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3b] uid[0x3b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3c] uid[0x3c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3d] uid[0x3d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3e] uid[0x3e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3f] uid[0x3f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x21] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x22] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x23] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x24] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x25] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x26] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x27] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x28] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x29] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x30] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x31] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x32] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x33] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x34] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x35] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x36] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x37] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x38] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x39] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 128 CPUs, 124 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xab9a7000-0xbba27fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc47d000-0xbc5b2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbeadd000-0xbeaedfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbed27000-0xbeddffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbede0000-0xbefdffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbefe0000-0xbeffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed18fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed19000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:128 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880236800000 s85824 r8192 d20672 u131072 [ 0.000000] pcpu-alloc: s85824 r8192 d20672 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 000 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 [ 0.000000] pcpu-alloc: [0] 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 [ 0.000000] pcpu-alloc: [0] 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 [ 0.000000] pcpu-alloc: [0] 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 [ 0.000000] pcpu-alloc: [0] 064 065 066 067 068 069 070 071 072 073 074 075 076 077 078 079 [ 0.000000] pcpu-alloc: [0] 080 081 082 083 084 085 086 087 088 089 090 091 092 093 094 095 [ 0.000000] pcpu-alloc: [0] 096 097 098 099 100 101 102 103 104 105 106 107 108 109 110 111 [ 0.000000] pcpu-alloc: [0] 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1998509 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=/dev/md0 ro loglvl=all quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7885308K/8104936K available (4811K kernel code, 693K rwdata, 1620K rodata, 984K init, 952K bss, 219628K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=128. [ 0.000000] NR_IRQS:33024 nr_irqs:1704 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3292.673 MHz processor [ 0.000009] Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.34 BogoMIPS (lpj=13170692) [ 0.000011] pid_max: default: 131072 minimum: 1024 [ 0.000035] Security Framework initialized [ 0.000038] AppArmor: AppArmor disabled by boot time parameter [ 0.000039] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.000364] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002225] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003081] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003088] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003337] Initializing cgroup subsys memory [ 0.003347] Initializing cgroup subsys devices [ 0.003348] Initializing cgroup subsys freezer [ 0.003349] Initializing cgroup subsys blkio [ 0.003350] Initializing cgroup subsys perf_event [ 0.003373] CPU: Physical Processor ID: 0 [ 0.003374] CPU: Processor Core ID: 0 [ 0.003646] mce: CPU supports 9 MCE banks [ 0.003656] CPU0: Thermal monitoring enabled (TM1) [ 0.003662] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.003662] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.003662] tlb_flushall_shift: 2 [ 0.003748] Freeing SMP alternatives memory: 20K (ffffffff819a5000 - ffffffff819aa000) [ 0.004508] ACPI: Core revision 20131115 [ 0.008702] ACPI: All ACPI Tables successfully acquired [ 0.010977] dmar: Host address width 36 [ 0.010979] dmar: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.010984] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f010da [ 0.010984] dmar: RMRR base: 0x000000bedbe000 end: 0x000000bedd1fff [ 0.011054] IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0 [ 0.011055] HPET id 0 under DRHD base 0xfed90000 [ 0.011171] Enabled IRQ remapping in x2apic mode [ 0.011172] Enabling x2apic [ 0.011173] Enabled x2apic [ 0.011177] Switched APIC routing to cluster x2apic. [ 0.011610] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.051293] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz (fam: 06, model: 3a, stepping: 09) [ 0.051299] TSC deadline timer enabled [ 0.051328] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.051333] ... version: 3 [ 0.051333] ... bit width: 48 [ 0.051334] ... generic registers: 8 [ 0.051334] ... value mask: 0000ffffffffffff [ 0.051335] ... max period: 0000ffffffffffff [ 0.051336] ... fixed-purpose events: 3 [ 0.051336] ... event mask: 00000007000000ff [ 0.052200] x86: Booting SMP configuration: [ 0.066165] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.052201] .... node #0, CPUs: #1 #2 #3 [ 0.093060] x86: Booted up 1 node, 4 CPUs [ 0.093063] smpboot: Total of 4 processors activated (26341.38 BogoMIPS) [ 0.096071] devtmpfs: initialized [ 0.097988] PM: Registering ACPI NVS region [mem 0xab9a7000-0xbba27fff] (268963840 bytes) [ 0.101650] PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 0.101872] NET: Registered protocol family 16 [ 0.101942] cpuidle: using governor ladder [ 0.101943] cpuidle: using governor menu [ 0.101962] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.101963] ACPI: bus type PCI registered [ 0.101964] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.102037] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.102039] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.106926] PCI: Using configuration type 1 for base access [ 0.107045] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.107045] mtrr: probably your BIOS does not setup all CPUs. [ 0.107046] mtrr: corrected configuration. [ 0.107382] bio: create slab <bio-0> at 0 [ 0.107602] ACPI: Added _OSI(Module Device) [ 0.107603] ACPI: Added _OSI(Processor Device) [ 0.107604] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.107605] ACPI: Added _OSI(Processor Aggregator Device) [ 0.109626] ACPI: Executed 1 blocks of module-level executable AML code [ 0.133067] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.133400] ACPI Error: [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 0.133403] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PDC] (Node ffff8802360f7da8), AE_NOT_FOUND (20131115/psparse-536) [ 0.133552] ACPI: SSDT 00000000bedbad98 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 0.133788] ACPI: Dynamic OEM Table Load: [ 0.133789] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 0.145495] ACPI: Interpreter enabled [ 0.145501] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.145507] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580) [ 0.145511] ACPI: (supports S0 S1 S3 S5) [ 0.145512] ACPI: Using IOAPIC for interrupt routing [ 0.145543] HEST: Table parsing has been initialized. [ 0.145545] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.145741] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.149948] ACPI: Power Resource [FN00] (off) [ 0.150003] ACPI: Power Resource [FN01] (off) [ 0.150056] ACPI: Power Resource [FN02] (off) [ 0.150109] ACPI: Power Resource [FN03] (off) [ 0.150162] ACPI: Power Resource [FN04] (off) [ 0.150536] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.150540] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.150777] acpi PNP0A08:00: _OSC: platform does not support [AER] [ 0.151029] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 0.151466] PCI host bridge to bus 0000:00 [ 0.151469] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.151470] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.151471] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.151472] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.151473] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff] [ 0.151474] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.151476] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.151477] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.151478] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.151479] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.151480] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.151481] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff] [ 0.151483] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.151488] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 [ 0.151575] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.151593] pci 0000:00:19.0: reg 0x10: [mem 0xc2500000-0xc251ffff] [ 0.151601] pci 0000:00:19.0: reg 0x14: [mem 0xc2570000-0xc2570fff] [ 0.151609] pci 0000:00:19.0: reg 0x18: [io 0x5040-0x505f] [ 0.151666] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.151702] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.151730] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.151749] pci 0000:00:1a.0: reg 0x10: [mem 0xc2560000-0xc25603ff] [ 0.151832] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.151877] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.151904] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.151976] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.152015] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.152040] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.152111] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.152150] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.152173] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400 [ 0.152244] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.152282] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.152310] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.152329] pci 0000:00:1d.0: reg 0x10: [mem 0xc2550000-0xc25503ff] [ 0.152412] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.152457] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.152478] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.152550] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.152573] pci 0000:00:1f.0: [8086:1c54] type 00 class 0x060100 [ 0.152721] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 0.152737] pci 0000:00:1f.2: reg 0x10: [io 0x5090-0x5097] [ 0.152744] pci 0000:00:1f.2: reg 0x14: [io 0x5080-0x5083] [ 0.152751] pci 0000:00:1f.2: reg 0x18: [io 0x5070-0x5077] [ 0.152758] pci 0000:00:1f.2: reg 0x1c: [io 0x5060-0x5063] [ 0.152766] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f] [ 0.152772] pci 0000:00:1f.2: reg 0x24: [mem 0xc2540000-0xc25407ff] [ 0.152813] pci 0000:00:1f.2: PME# supported from D3hot [ 0.152864] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.152878] pci 0000:00:1f.3: reg 0x10: [mem 0xc2530000-0xc25300ff 64bit] [ 0.152896] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f] [ 0.153004] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.153008] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.153011] pci 0000:00:1c.0: bridge window [mem 0xc1900000-0xc22fffff] [ 0.153017] pci 0000:00:1c.0: bridge window [mem 0xc2600000-0xc2ffffff 64bit pref] [ 0.153119] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 [ 0.153151] pci 0000:02:00.0: reg 0x10: [mem 0xc2400000-0xc241ffff] [ 0.153196] pci 0000:02:00.0: reg 0x18: [io 0x3000-0x301f] [ 0.153220] pci 0000:02:00.0: reg 0x1c: [mem 0xc2420000-0xc2423fff] [ 0.153413] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.153465] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.161087] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.161092] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.161097] pci 0000:00:1c.4: bridge window [mem 0xc2400000-0xc24fffff] [ 0.161200] pci 0000:03:00.0: [102b:0522] type 00 class 0x030000 [ 0.161228] pci 0000:03:00.0: reg 0x10: [mem 0xc0000000-0xc0ffffff] [ 0.161246] pci 0000:03:00.0: reg 0x14: [mem 0xc1810000-0xc1813fff] [ 0.161265] pci 0000:03:00.0: reg 0x18: [mem 0xc1000000-0xc17fffff] [ 0.161340] pci 0000:03:00.0: reg 0x30: [mem 0xc1800000-0xc180ffff pref] [ 0.161465] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.169085] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 0.169093] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc18fffff] [ 0.169159] pci 0000:04:00.0: [8086:100e] type 00 class 0x020000 [ 0.169177] pci 0000:04:00.0: reg 0x10: [mem 0xc2340000-0xc235ffff] [ 0.169187] pci 0000:04:00.0: reg 0x14: [mem 0xc2320000-0xc233ffff] [ 0.169196] pci 0000:04:00.0: reg 0x18: [io 0x2000-0x203f] [ 0.169227] pci 0000:04:00.0: reg 0x30: [mem 0xc2300000-0xc231ffff pref] [ 0.169270] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.169330] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 0.169334] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] [ 0.169337] pci 0000:00:1e.0: bridge window [mem 0xc2300000-0xc23fffff] [ 0.169343] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.169344] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.169345] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.169346] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode) [ 0.169347] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.169348] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.169350] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.169351] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.169352] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.169353] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.169354] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode) [ 0.169356] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) [ 0.169381] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.169773] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.169812] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.169848] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.169884] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.169920] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.169955] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.169991] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.170027] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.170220] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.170224] ACPI: \_SB_.PCI0: notify handler is installed [ 0.170262] Found 1 acpi root devices [ 0.170317] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.170318] vgaarb: loaded [ 0.170319] vgaarb: bridge control possible 0000:03:00.0 [ 0.170340] PCI: Using ACPI for IRQ routing [ 0.171708] PCI: pci_cache_line_size set to 64 bytes [ 0.171750] e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff] [ 0.171751] e820: reserve RAM buffer [mem 0xab9a7000-0xabffffff] [ 0.171752] e820: reserve RAM buffer [mem 0xbc47d000-0xbfffffff] [ 0.171753] e820: reserve RAM buffer [mem 0xbeadd000-0xbfffffff] [ 0.171754] e820: reserve RAM buffer [mem 0xbed27000-0xbfffffff] [ 0.171755] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff] [ 0.171843] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.171847] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.173881] Switched to clocksource hpet [ 0.175287] pnp: PnP ACPI init [ 0.175294] ACPI: bus type PNP registered [ 0.175321] pnp 00:00: [dma 4] [ 0.175333] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.175345] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.175404] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.175424] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.175449] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.175450] system 00:04: [io 0xffff] has been reserved [ 0.175451] system 00:04: [io 0xffff] has been reserved [ 0.175453] system 00:04: [io 0xffff] has been reserved [ 0.175454] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.175455] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.175456] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.175458] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.175459] system 00:04: [io 0x0900-0x090f] has been reserved [ 0.175460] system 00:04: [io 0x0295-0x0296] has been reserved [ 0.175462] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.175478] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.175506] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.175508] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.175663] pnp 00:07: Plug and Play ACPI device, IDs IPI0001 (active) [ 0.175771] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.175773] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.175774] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.175775] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.175777] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.175778] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.175780] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.175781] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.175783] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved [ 0.175784] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.175785] system 00:08: [mem 0xc2590000-0xc2590fff] has been reserved [ 0.175787] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.175950] system 00:09: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.175951] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.175986] pnp: PnP ACPI: found 10 devices [ 0.175986] ACPI: bus type PNP unregistered [ 0.181636] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.181639] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.181644] pci 0000:00:1c.0: bridge window [mem 0xc1900000-0xc22fffff] [ 0.181648] pci 0000:00:1c.0: bridge window [mem 0xc2600000-0xc2ffffff 64bit pref] [ 0.181654] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.181656] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.181661] pci 0000:00:1c.4: bridge window [mem 0xc2400000-0xc24fffff] [ 0.181668] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 0.181673] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc18fffff] [ 0.181680] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 0.181683] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] [ 0.181687] pci 0000:00:1e.0: bridge window [mem 0xc2300000-0xc23fffff] [ 0.181695] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.181696] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.181697] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.181698] pci_bus 0000:00: resource 7 [mem 0x000cc000-0x000cffff] [ 0.181699] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000d3fff] [ 0.181700] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff] [ 0.181701] pci_bus 0000:00: resource 10 [mem 0x000d8000-0x000dbfff] [ 0.181703] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000dffff] [ 0.181704] pci_bus 0000:00: resource 12 [mem 0x000e0000-0x000e3fff] [ 0.181705] pci_bus 0000:00: resource 13 [mem 0x000e4000-0x000e7fff] [ 0.181706] pci_bus 0000:00: resource 14 [mem 0xc0000000-0xfeafffff] [ 0.181707] pci_bus 0000:00: resource 15 [mem 0xfed40000-0xfed44fff] [ 0.181708] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.181709] pci_bus 0000:01: resource 1 [mem 0xc1900000-0xc22fffff] [ 0.181710] pci_bus 0000:01: resource 2 [mem 0xc2600000-0xc2ffffff 64bit pref] [ 0.181711] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.181712] pci_bus 0000:02: resource 1 [mem 0xc2400000-0xc24fffff] [ 0.181714] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc18fffff] [ 0.181715] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 0.181716] pci_bus 0000:04: resource 1 [mem 0xc2300000-0xc23fffff] [ 0.181717] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.181718] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.181719] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.181720] pci_bus 0000:04: resource 7 [mem 0x000cc000-0x000cffff] [ 0.181721] pci_bus 0000:04: resource 8 [mem 0x000d0000-0x000d3fff] [ 0.181722] pci_bus 0000:04: resource 9 [mem 0x000d4000-0x000d7fff] [ 0.181723] pci_bus 0000:04: resource 10 [mem 0x000d8000-0x000dbfff] [ 0.181724] pci_bus 0000:04: resource 11 [mem 0x000dc000-0x000dffff] [ 0.181726] pci_bus 0000:04: resource 12 [mem 0x000e0000-0x000e3fff] [ 0.181727] pci_bus 0000:04: resource 13 [mem 0x000e4000-0x000e7fff] [ 0.181728] pci_bus 0000:04: resource 14 [mem 0xc0000000-0xfeafffff] [ 0.181729] pci_bus 0000:04: resource 15 [mem 0xfed40000-0xfed44fff] [ 0.181771] NET: Registered protocol family 2 [ 0.181979] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.182130] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.182336] TCP: Hash tables configured (established 65536 bind 65536) [ 0.182354] TCP: reno registered [ 0.182364] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.182396] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.182612] NET: Registered protocol family 1 [ 0.213980] pci 0000:03:00.0: Boot video device [ 0.213987] PCI: CLS 64 bytes, default 64 [ 0.214017] Unpacking initramfs... [ 0.382260] Freeing initrd memory: 13276K (ffff880036602000 - ffff8800372f9000) [ 0.382275] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.382277] software IO TLB [mem 0xa79a7000-0xab9a7000] (64MB) mapped at [ffff8800a79a7000-ffff8800ab9a6fff] [ 0.382297] Simple Boot Flag at 0x4f set to 0x1 [ 0.382547] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x15 [ 0.382553] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x15 [ 0.382558] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x15 [ 0.382564] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x15 [ 0.382616] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.383428] audit: initializing netlink socket (disabled) [ 0.383439] type=2000 audit(1400172208.384:1): initialized [ 0.392890] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.393281] VFS: Disk quotas dquot_6.5.2 [ 0.393315] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.393395] msgmni has been set to 15426 [ 0.393631] alg: No test for stdrng (krng) [ 0.393648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.393703] io scheduler noop registered [ 0.393704] io scheduler deadline registered [ 0.393717] io scheduler cfq registered (default) [ 0.393878] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.393998] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X [ 0.394106] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X [ 0.394175] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.394179] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.394190] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 0.394192] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.394195] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 0.394206] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 0.394208] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.394211] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 0.394217] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.394240] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 1c10 ss_vid 8086 ss_did 7270 [ 0.394289] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded [ 0.394292] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.394310] intel_idle: MWAIT substates: 0x1120 [ 0.394311] intel_idle: v0.4 model 0x3A [ 0.394311] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.394416] ERST: Error Record Serialization Table (ERST) support is initialized. [ 0.394420] pstore: Registered erst as persistent store backend [ 0.394549] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 0.394584] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.394856] Linux agpgart interface v0.103 [ 0.394905] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.381901] tsc: Refined TSC clocksource calibration: 3292.520 MHz [ 1.431526] i8042: No controller found [ 1.431707] mousedev: PS/2 mouse device common for all mice [ 1.431732] rtc_cmos 00:05: RTC can wake from S4 [ 1.431875] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.431900] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.431906] Intel P-state driver initializing. [ 1.431912] Intel pstate controlling: cpu 0 [ 1.431920] Intel pstate controlling: cpu 1 [ 1.431926] Intel pstate controlling: cpu 2 [ 1.431932] Intel pstate controlling: cpu 3 [ 1.431945] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> [ 1.431946] AMD IOMMUv2 functionality not available on this system [ 1.432039] TCP: cubic registered [ 1.432121] NET: Registered protocol family 10 [ 1.432377] mip6: Mobile IPv6 [ 1.432379] NET: Registered protocol family 17 [ 1.432380] mpls_gso: MPLS GSO support [ 1.432536] registered taskstats version 1 [ 1.433254] rtc_cmos 00:05: setting system clock to 2014-05-15 16:43:29 UTC (1400172209) [ 1.433280] PM: Hibernation image not present or could not be loaded. [ 1.433692] Freeing unused kernel memory: 984K (ffffffff818af000 - ffffffff819a5000) [ 1.433693] Write protecting the kernel read-only data: 8192k [ 1.435671] Freeing unused kernel memory: 1324K (ffff8800014b5000 - ffff880001600000) [ 1.436331] Freeing unused kernel memory: 428K (ffff880001795000 - ffff880001800000) [ 1.443198] systemd-udevd[67]: starting version 204 [ 1.452316] pps_core: LinuxPPS API ver. 1 registered [ 1.452318] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.452455] PTP clock support registered [ 1.453391] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.453392] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 1.453544] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.453566] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 1.459500] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.459502] ACPI: Thermal Zone [TZ00] (28 C) [ 1.459613] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.459614] ACPI: Thermal Zone [TZ01] (30 C) [ 1.460072] ACPI: Fan [FAN0] (off) [ 1.460095] ACPI: Fan [FAN1] (off) [ 1.460116] ACPI: Fan [FAN2] (off) [ 1.460318] ACPI: Fan [FAN3] (off) [ 1.460343] ACPI: Fan [FAN4] (off) [ 1.463195] ACPI: bus type USB registered [ 1.463210] usbcore: registered new interface driver usbfs [ 1.463215] usbcore: registered new interface driver hub [ 1.464324] usbcore: registered new device driver usb [ 1.464620] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.464806] ehci-pci: EHCI PCI platform driver [ 1.465567] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.465568] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.467474] SCSI subsystem initialized [ 1.468174] libata version 3.00 loaded. [ 1.720816] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.720819] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:55:62:65 [ 1.720820] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.720857] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF [ 1.721013] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.721018] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.721050] ehci-pci 0000:00:1a.0: debug port 2 [ 1.721075] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.721108] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 1.721117] e1000e 0000:02:00.0: irq 46 for MSI/MSI-X [ 1.721125] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X [ 1.724936] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.724948] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc2560000 [ 1.733869] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.733913] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.733915] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.733916] usb usb1: Product: EHCI Host Controller [ 1.733917] usb usb1: Manufacturer: Linux 3.13-1-amd64 ehci_hcd [ 1.733918] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.734028] hub 1-0:1.0: USB hub found [ 1.734034] hub 1-0:1.0: 2 ports detected [ 1.734152] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.734155] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.734166] ehci-pci 0000:00:1d.0: debug port 2 [ 1.738056] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.738067] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc2550000 [ 1.749852] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.749873] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.749875] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.749876] usb usb2: Product: EHCI Host Controller [ 1.749877] usb usb2: Manufacturer: Linux 3.13-1-amd64 ehci_hcd [ 1.749878] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.749998] hub 2-0:1.0: USB hub found [ 1.750003] hub 2-0:1.0: 2 ports detected [ 1.750080] ahci 0000:00:1f.2: version 3.0 [ 1.750169] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X [ 1.755143] e1000 0000:04:00.0 eth1: (PCI:33MHz:32-bit) 00:0e:0c:7f:a5:ce [ 1.755145] e1000 0000:04:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.765895] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode [ 1.765900] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 1.790199] scsi0 : ahci [ 1.790361] scsi1 : ahci [ 1.790482] scsi2 : ahci [ 1.790580] scsi3 : ahci [ 1.790680] scsi4 : ahci [ 1.790780] scsi5 : ahci [ 1.790812] ata1: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540100 irq 48 [ 1.790814] ata2: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540180 irq 48 [ 1.790817] ata3: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540200 irq 48 [ 1.790819] ata4: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540280 irq 48 [ 1.790820] ata5: DUMMY [ 1.790821] ata6: DUMMY [ 1.834875] e1000e 0000:02:00.0 eth2: registered PHC clock [ 1.834877] e1000e 0000:02:00.0 eth2: (PCI Express:2.5GT/s:Width x1) 00:1e:67:55:62:64 [ 1.834879] e1000e 0000:02:00.0 eth2: Intel(R) PRO/1000 Network Connection [ 1.834964] e1000e 0000:02:00.0 eth2: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 2.045921] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.109873] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.109909] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.109928] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.109946] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.111378] ata4.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 2.111380] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.111407] ata3.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 2.111409] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.111660] ata1.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 2.111665] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.111710] ata2.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 2.111712] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.112865] ata4.00: configured for UDMA/133 [ 2.113869] ata3.00: configured for UDMA/133 [ 2.114400] ata1.00: configured for UDMA/133 [ 2.114425] ata2.00: configured for UDMA/133 [ 2.114575] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 2.114840] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 2.115029] scsi 2:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 2.115210] scsi 3:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 2.118349] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.118372] sd 0:0:0:0: [sda] Write Protect is off [ 2.118373] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.118381] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.118383] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.118397] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.118413] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.118445] sd 1:0:0:0: [sdb] Write Protect is off [ 2.118447] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.118464] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.118466] sd 2:0:0:0: [sdc] Write Protect is off [ 2.118468] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.118495] sd 3:0:0:0: [sdd] Write Protect is off [ 2.118496] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.118503] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.118536] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.124671] sdb: sdb1 sdb2 sdb3 [ 2.124910] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.128539] sdc: sdc1 sdc2 sdc3 [ 2.128841] sd 2:0:0:0: [sdc] Attached SCSI disk [ 2.129635] sdd: sdd1 sdd2 sdd3 [ 2.129945] sd 3:0:0:0: [sdd] Attached SCSI disk [ 2.129980] sda: sda1 sda2 sda3 [ 2.130135] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.131001] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.131033] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.131061] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.131089] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 2.178241] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.178243] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.178493] hub 1-1:1.0: USB hub found [ 2.178639] hub 1-1:1.0: 6 ports detected [ 2.250993] md: md0 stopped. [ 2.252101] md: bind<sdc1> [ 2.252260] md: bind<sdd1> [ 2.252419] md: bind<sda1> [ 2.252575] md: bind<sdb1> [ 2.253257] md: raid1 personality registered for level 1 [ 2.253565] md/raid1:md0: active with 4 out of 4 mirrors [ 2.253576] md0: detected capacity change from 0 to 998703104 [ 2.253588] RAID1 conf printout: [ 2.253590] --- wd:4 rd:4 [ 2.253591] disk 0, wo:0, o:1, dev:sdb1 [ 2.253592] disk 1, wo:0, o:1, dev:sdc1 [ 2.253593] disk 2, wo:0, o:1, dev:sdd1 [ 2.253594] disk 3, wo:0, o:1, dev:sda1 [ 2.261204] md0: unknown partition table [ 2.271623] md: md1 stopped. [ 2.272471] md: bind<sda2> [ 2.273259] md: bind<sdd2> [ 2.273376] md: bind<sdc2> [ 2.273491] md: bind<sdb2> [ 2.274153] md: raid10 personality registered for level 10 [ 2.274447] md/raid10:md1: active with 4 out of 4 devices [ 2.274455] md1: detected capacity change from 0 to 2004877312 [ 2.274472] RAID10 conf printout: [ 2.274472] --- wd:4 rd:4 [ 2.274473] disk 0, wo:0, o:1, dev:sdb2 [ 2.274474] disk 1, wo:0, o:1, dev:sda2 [ 2.274474] disk 2, wo:0, o:1, dev:sdd2 [ 2.274475] disk 3, wo:0, o:1, dev:sdc2 [ 2.275274] md1: unknown partition table [ 2.277211] md: md2 stopped. [ 2.277847] md: bind<sdb3> [ 2.277965] md: bind<sdc3> [ 2.278078] md: bind<sdd3> [ 2.278190] md: bind<sda3> [ 2.278732] md/raid10:md2: active with 4 out of 4 devices [ 2.278741] md2: detected capacity change from 0 to 19983761408 [ 2.278752] RAID10 conf printout: [ 2.278752] --- wd:4 rd:4 [ 2.278753] disk 0, wo:0, o:1, dev:sda3 [ 2.278754] disk 1, wo:0, o:1, dev:sdb3 [ 2.278754] disk 2, wo:0, o:1, dev:sdc3 [ 2.278754] disk 3, wo:0, o:1, dev:sdd3 [ 2.289853] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.291579] md2: unknown partition table [ 2.322858] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 2.381981] Switched to clocksource tsc [ 2.422215] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.422217] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.422367] hub 2-1:1.0: USB hub found [ 2.422465] hub 2-1:1.0: 6 ports detected [ 2.473726] random: nonblocking pool is initialized [ 2.494010] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 2.587506] usb 1-1.1: New USB device found, idVendor=046b, idProduct=ff10 [ 2.587511] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.587513] usb 1-1.1: Product: Virtual Keyboard and Mouse [ 2.587515] usb 1-1.1: Manufacturer: American Megatrends Inc. [ 2.587517] usb 1-1.1: SerialNumber: serial [ 2.693957] usb 2-1.4: new low-speed USB device number 3 using ehci-pci [ 2.791371] usb 2-1.4: New USB device found, idVendor=413c, idProduct=2107 [ 2.791376] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.791378] usb 2-1.4: Product: Dell USB Entry Keyboard [ 2.791381] usb 2-1.4: Manufacturer: DELL [ 3.015014] systemd-udevd[415]: starting version 204 [ 3.207647] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251) [ 3.207652] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.267123] hidraw: raw HID events driver (C) Jiri Kosina [ 3.278234] ipmi message handler version 39.2 [ 3.300766] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 3.300771] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.300774] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 3.300776] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.300777] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 3.300778] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.300779] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 3.300781] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SI_.SIOR 2 (20131115/utaddress-251) [ 3.300783] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.300783] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 3.304224] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 3.304229] ACPI: Sleep Button [SLPB] [ 3.304254] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 3.304255] ACPI: Power Button [PWRF] [ 3.305036] IPMI System Interface driver. [ 3.305048] ipmi_si: probing via ACPI [ 3.305059] ipmi_si 00:07: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0 [ 3.305059] ipmi_si: Adding ACPI-specified kcs state machine [ 3.305068] ipmi_si: probing via SMBIOS [ 3.305069] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 3.305069] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface [ 3.305071] ipmi_si: probing via SPMI [ 3.305072] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0 [ 3.305072] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface [ 3.305074] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 3.305953] systemd-udevd[458]: renamed network interface eth2 to rename4 [ 3.306118] usbcore: registered new interface driver usbhid [ 3.306119] usbhid: USB HID core driver [ 3.350023] systemd-udevd[469]: renamed network interface eth1 to eth2 [ 3.354723] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 3.377986] systemd-udevd[458]: renamed network interface rename4 to eth1 [ 3.378048] iTCO_vendor_support: vendor-support=0 [ 3.378347] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 3.378368] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 3.389121] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input3 [ 3.389177] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.1/input0 [ 3.389249] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input4 [ 3.389311] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.1/input1 [ 3.389400] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5 [ 3.389945] hid-generic 0003:413C:2107.0003: input,hidraw2: USB HID v1.10 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:1d.0-1.4/input0 [ 3.424331] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 3.435655] alg: No test for crc32 (crc32-pclmul) [ 3.454557] ipmi_si 00:07: Found new BMC (man_id: 0x000157, prod_id: 0x0048, dev_id: 0x21) [ 3.454562] ipmi_si 00:07: IPMI kcs interface initialized [ 3.707660] intel_rapl: domain uncore energy ctr 0:0 not working, skip [ 4.085565] EXT4-fs (md0): re-mounted. Opts: (null) [ 4.182009] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro [ 4.283728] loop: module loaded [ 4.438220] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 5.629834] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 5.733816] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 5.733968] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.734631] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 5.738128] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 5.738298] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [-- Attachment #4: xdmesg --] [-- Type: text/plain, Size: 15847 bytes --] (XEN) Xen version 4.3.0 (Debian 4.3.0-3+b1) (buildd-binet@buildd.debian.org) (gcc (Debian 4.8.2-8) 4.8.2) debug=n Wed Dec 4 07:43:54 UTC 2013 (XEN) Bootloader: GRUB 2.00-22 (XEN) Command line: placeholder loglvl=all (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 4 MBR signatures (XEN) Found 4 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009bc00 (usable) (XEN) 000000000009bc00 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000ab9a7000 (usable) (XEN) 00000000ab9a7000 - 00000000bba28000 (ACPI NVS) (XEN) 00000000bba28000 - 00000000bc483000 (usable) (XEN) 00000000bc483000 - 00000000bc5b9000 (reserved) (XEN) 00000000bc5b9000 - 00000000beadd000 (usable) (XEN) 00000000beadd000 - 00000000beaee000 (reserved) (XEN) 00000000beaee000 - 00000000bed27000 (usable) (XEN) 00000000bed27000 - 00000000bede0000 (reserved) (XEN) 00000000bede0000 - 00000000befe0000 (ACPI NVS) (XEN) 00000000befe0000 - 00000000befff000 (ACPI data) (XEN) 00000000befff000 - 00000000bf000000 (usable) (XEN) 00000000bf000000 - 00000000c0000000 (reserved) (XEN) 00000000f8000000 - 00000000fc000000 (reserved) (XEN) 00000000fec00000 - 00000000fec01000 (reserved) (XEN) 00000000fed19000 - 00000000fed1a000 (reserved) (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffa00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000240000000 (usable) (XEN) ACPI: RSDP 000F0410, 0024 (r2 INTEL) (XEN) ACPI: XSDT BEFFDE18, 00AC (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: FACP BEFFCD98, 00F4 (r4 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: DSDT BEFEE018, CE48 (r2 INTEL S1200BTL 0 INTL 20100331) (XEN) ACPI: FACS BEFFDD40, 0040 (XEN) ACPI: APIC BEFFB018, 0652 (r3 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: SPMI BEFFEC98, 0040 (r5 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: MCFG BEFFEC18, 003C (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: WDDT BEFFEF18, 0040 (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: HPET BEFFEE98, 0038 (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: SSDT BEFEB018, 10A8 (r2 INTEL S1200BTL 1000 INTL 20100331) (XEN) ACPI: BOOT BEFFEE18, 0028 (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: SSDT BEFE7698, 05E0 (r2 INTEL S1200BTL 3000 INTL 20100331) (XEN) ACPI: SSDT BEFE6018, 0A92 (r2 INTEL S1200BTL 3000 INTL 20100331) (XEN) ACPI: SSDT BEFEA598, 054D (r1 INTEL S1200BTL 1000 INTL 20100331) (XEN) ACPI: SSDT BEFFDC18, 0069 (r1 INTEL S1200BTL 1000 INTL 20100331) (XEN) ACPI: SSDT BEFE9E18, 017B (r2 INTEL S1200BTL 2000 INTL 20100331) (XEN) ACPI: HEST BEFE8F18, 00A8 (r1 INTEL S1200BTL 1 INTL 1) (XEN) ACPI: BERT BEFFED98, 0030 (r1 INTEL S1200BTL 1 INTL 1) (XEN) ACPI: ERST BEFE8C98, 0230 (r1 INTEL S1200BTL 1 INTL 1) (XEN) ACPI: EINJ BEFFC918, 0130 (r1 INTEL S1200BTL 1 INTL 1) (XEN) System RAM: 7914MB (8104940kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000240000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000fc8e0 (XEN) DMI 2.6 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x408 (XEN) ACPI: SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0] (XEN) ACPI: 32/64X FACS address mismatch in FADT - beffdd40/0000000000000000, using 32 (XEN) ACPI: wakeup_vec[beffdd4c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) (XEN) Processor #2 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) (XEN) Processor #4 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) (XEN) Processor #6 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) (XEN) Processor #1 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) (XEN) Processor #3 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) (XEN) Processor #5 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) (XEN) Processor #7 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x21] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x22] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x23] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x24] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x25] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x26] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x27] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x28] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x29] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2a] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2b] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2c] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2d] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2e] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2f] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x30] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x31] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x32] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x33] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x34] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x35] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x36] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x37] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x38] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x39] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3a] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3b] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3c] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3d] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3e] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3f] lapic_id[0xff] disabled) (XEN) ACPI: X2APIC (apic_id[0x00] uid[0x00] disabled) (XEN) ACPI: X2APIC (apic_id[0x01] uid[0x01] disabled) (XEN) ACPI: X2APIC (apic_id[0x02] uid[0x02] disabled) (XEN) ACPI: X2APIC (apic_id[0x03] uid[0x03] disabled) (XEN) ACPI: X2APIC (apic_id[0x04] uid[0x04] disabled) (XEN) ACPI: X2APIC (apic_id[0x05] uid[0x05] disabled) (XEN) ACPI: X2APIC (apic_id[0x06] uid[0x06] disabled) (XEN) ACPI: X2APIC (apic_id[0x07] uid[0x07] disabled) (XEN) ACPI: X2APIC (apic_id[0x08] uid[0x08] disabled) (XEN) ACPI: X2APIC (apic_id[0x09] uid[0x09] disabled) (XEN) ACPI: X2APIC (apic_id[0x0a] uid[0x0a] disabled) (XEN) ACPI: X2APIC (apic_id[0x0b] uid[0x0b] disabled) (XEN) ACPI: X2APIC (apic_id[0x0c] uid[0x0c] disabled) (XEN) ACPI: X2APIC (apic_id[0x0d] uid[0x0d] disabled) (XEN) ACPI: X2APIC (apic_id[0x0e] uid[0x0e] disabled) (XEN) ACPI: X2APIC (apic_id[0x0f] uid[0x0f] disabled) (XEN) ACPI: X2APIC (apic_id[0x10] uid[0x10] disabled) (XEN) ACPI: X2APIC (apic_id[0x11] uid[0x11] disabled) (XEN) ACPI: X2APIC (apic_id[0x12] uid[0x12] disabled) (XEN) ACPI: X2APIC (apic_id[0x13] uid[0x13] disabled) (XEN) ACPI: X2APIC (apic_id[0x14] uid[0x14] disabled) (XEN) ACPI: X2APIC (apic_id[0x15] uid[0x15] disabled) (XEN) ACPI: X2APIC (apic_id[0x16] uid[0x16] disabled) (XEN) ACPI: X2APIC (apic_id[0x17] uid[0x17] disabled) (XEN) ACPI: X2APIC (apic_id[0x18] uid[0x18] disabled) (XEN) ACPI: X2APIC (apic_id[0x19] uid[0x19] disabled) (XEN) ACPI: X2APIC (apic_id[0x1a] uid[0x1a] disabled) (XEN) ACPI: X2APIC (apic_id[0x1b] uid[0x1b] disabled) (XEN) ACPI: X2APIC (apic_id[0x1c] uid[0x1c] disabled) (XEN) ACPI: X2APIC (apic_id[0x1d] uid[0x1d] disabled) (XEN) ACPI: X2APIC (apic_id[0x1e] uid[0x1e] disabled) (XEN) ACPI: X2APIC (apic_id[0x1f] uid[0x1f] disabled) (XEN) ACPI: X2APIC (apic_id[0x20] uid[0x20] disabled) (XEN) ACPI: X2APIC (apic_id[0x21] uid[0x21] disabled) (XEN) ACPI: X2APIC (apic_id[0x22] uid[0x22] disabled) (XEN) ACPI: X2APIC (apic_id[0x23] uid[0x23] disabled) (XEN) ACPI: X2APIC (apic_id[0x24] uid[0x24] disabled) (XEN) ACPI: X2APIC (apic_id[0x25] uid[0x25] disabled) (XEN) ACPI: X2APIC (apic_id[0x26] uid[0x26] disabled) (XEN) ACPI: X2APIC (apic_id[0x27] uid[0x27] disabled) (XEN) ACPI: X2APIC (apic_id[0x28] uid[0x28] disabled) (XEN) ACPI: X2APIC (apic_id[0x29] uid[0x29] disabled) (XEN) ACPI: X2APIC (apic_id[0x2a] uid[0x2a] disabled) (XEN) ACPI: X2APIC (apic_id[0x2b] uid[0x2b] disabled) (XEN) ACPI: X2APIC (apic_id[0x2c] uid[0x2c] disabled) (XEN) ACPI: X2APIC (apic_id[0x2d] uid[0x2d] disabled) (XEN) ACPI: X2APIC (apic_id[0x2e] uid[0x2e] disabled) (XEN) ACPI: X2APIC (apic_id[0x2f] uid[0x2f] disabled) (XEN) ACPI: X2APIC (apic_id[0x30] uid[0x30] disabled) (XEN) ACPI: X2APIC (apic_id[0x31] uid[0x31] disabled) (XEN) ACPI: X2APIC (apic_id[0x32] uid[0x32] disabled) (XEN) ACPI: X2APIC (apic_id[0x33] uid[0x33] disabled) (XEN) ACPI: X2APIC (apic_id[0x34] uid[0x34] disabled) (XEN) ACPI: X2APIC (apic_id[0x35] uid[0x35] disabled) (XEN) ACPI: X2APIC (apic_id[0x36] uid[0x36] disabled) (XEN) ACPI: X2APIC (apic_id[0x37] uid[0x37] disabled) (XEN) ACPI: X2APIC (apic_id[0x38] uid[0x38] disabled) (XEN) ACPI: X2APIC (apic_id[0x39] uid[0x39] disabled) (XEN) ACPI: X2APIC (apic_id[0x3a] uid[0x3a] disabled) (XEN) ACPI: X2APIC (apic_id[0x3b] uid[0x3b] disabled) (XEN) ACPI: X2APIC (apic_id[0x3c] uid[0x3c] disabled) (XEN) ACPI: X2APIC (apic_id[0x3d] uid[0x3d] disabled) (XEN) ACPI: X2APIC (apic_id[0x3e] uid[0x3e] disabled) (XEN) ACPI: X2APIC (apic_id[0x3f] uid[0x3f] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 (XEN) Xen ERST support is initialized. (XEN) Using ACPI (MADT) for SMP configuration information (XEN) SMP: Allowing 128 CPUs (120 hotplug CPUs) (XEN) IRQ limits: 24 GSI, 1528 MSI/MSI-X (XEN) Not enabling x2APIC: depends on iommu_supports_eim. (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 3292.659 MHz processor. (XEN) Initing memory sharing. (XEN) xstate_init: using cntxt_size: 0x340 and states: 0x7 (XEN) mce_intel.c:717: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0 (XEN) Intel machine check reporting enabled (XEN) PCI: MCFG configuration 0: base f8000000 segment 0000 buses 00 - 3f (XEN) PCI: MCFG area at f8000000 reserved in E820 (XEN) PCI: Using MCFG for segment 0000 bus 00-3f (XEN) I/O virtualisation disabled (XEN) Enabled directed EOI with ioapic_ack_old on! (XEN) ENABLING IO-APIC IRQs (XEN) -> Using old ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) TSC deadline timer enabled (XEN) Platform timer is 14.318MHz HPET (XEN) Allocated console ring of 64 KiB. (XEN) mwait-idle: MWAIT substates: 0x1120 (XEN) mwait-idle: v0.4 model 0x3a (XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff (XEN) CPU0: VMX disabled by BIOS. (XEN) VMX: failed to initialise. (XEN) Brought up 8 CPUs (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) mtrr: your CPUs had inconsistent variable MTRR settings (XEN) mtrr: probably your BIOS does not setup all CPUs. (XEN) mtrr: corrected configuration. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1ebc000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000230000000->0000000234000000 (1943361 pages to be allocated) (XEN) Init. ramdisk: 000000023da18000->000000023ffffa00 (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81ebc000 (XEN) Init. ramdisk: ffffffff81ebc000->ffffffff844a3a00 (XEN) Phys-Mach map: ffffffff844a4000->ffffffff853aa948 (XEN) Start info: ffffffff853ab000->ffffffff853ab4b4 (XEN) Page tables: ffffffff853ac000->ffffffff853db000 (XEN) Boot stack: ffffffff853db000->ffffffff853dc000 (XEN) TOTAL: ffffffff80000000->ffffffff85800000 (XEN) ENTRY ADDRESS: ffffffff818c41f0 (XEN) Dom0 has maximum 8 VCPUs (XEN) Scrubbing Free RAM: .done. (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Std. Loglevel: All (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 260kB init memory. (XEN) PCI add device 0000:00:00.0 (XEN) PCI add device 0000:00:19.0 (XEN) PCI add device 0000:00:1a.0 (XEN) PCI add device 0000:00:1c.0 (XEN) PCI add device 0000:00:1c.4 (XEN) PCI add device 0000:00:1c.5 (XEN) PCI add device 0000:00:1d.0 (XEN) PCI add device 0000:00:1e.0 (XEN) PCI add device 0000:00:1f.0 (XEN) PCI add device 0000:00:1f.2 (XEN) PCI add device 0000:00:1f.3 (XEN) PCI add device 0000:02:00.0 (XEN) PCI add device 0000:03:00.0 (XEN) PCI add device 0000:04:00.0 (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa (XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa [-- Attachment #5: Type: text/plain, Size: 126 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 failed with error -110" 2014-05-16 8:58 ` dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 failed with error -110" Ian Campbell @ 2014-05-16 10:08 ` Jan Beulich 2014-05-16 10:14 ` Andrew Cooper ` (2 more replies) 0 siblings, 3 replies; 24+ messages in thread From: Jan Beulich @ 2014-05-16 10:08 UTC (permalink / raw) To: Mike Egglestone, Ian Campbell; +Cc: 748052, xen-devel >>> On 16.05.14 at 10:58, <ijc@hellion.org.uk> wrote: > So it seems like dom0 is unable to (correctly) bind to some hardware > interrupts. I wonder if these messages from Xen's dmesg are relevant. > (XEN) Not enabling x2APIC: depends on iommu_supports_eim. > (XEN) I/O virtualisation disabled > (XEN) Enabled directed EOI with ioapic_ack_old on! The last one certainly isn't, and the first two shouldn't (albeit the non-Xen kernel is running in x2APIC mode). That difference is likely because the Xen and non-Xen boots are with differing BIOS configurations, or on different machines: The non-Xen boot shows a DMAR ACPI table, while the Xen one doesn't. Or wait, no, the hypervisor and kernel-under-Xen logs differ in that respect too. We clearly need a consistent set of logs. The one clearly odd thing in the hypervisor logs are these two lines (XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa (XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa Can at least the left side address please be associated back with a symbol (with the help of xen-syms perhaps)? And finally, looking at the IRQ usage, this [ 2.087722] xen: registering gsi 22 triggering 0 polarity 1 [ 2.087731] xen: --> pirq=22 -> irq=22 (gsi=22) [ 2.100161] xen: registering gsi 20 triggering 0 polarity 1 [ 2.100166] xen: --> pirq=20 -> irq=20 (gsi=20) happens rather early - it's not clear to me in which context that is. And there's no problem with GSI 22 used by the other EHCI HC, so a fundamental question is what other device(s) is/are using GSI 20 (not visible from the non-Xen kernel log). Jan ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 failed with error -110" 2014-05-16 10:08 ` Jan Beulich @ 2014-05-16 10:14 ` Andrew Cooper 2014-05-16 14:48 ` Ross Philipson 2014-05-16 15:31 ` Ian Campbell 2 siblings, 0 replies; 24+ messages in thread From: Andrew Cooper @ 2014-05-16 10:14 UTC (permalink / raw) To: Jan Beulich; +Cc: 748052, xen-devel, Mike Egglestone, Ian Campbell On 16/05/14 11:08, Jan Beulich wrote: >>>> On 16.05.14 at 10:58, <ijc@hellion.org.uk> wrote: >> So it seems like dom0 is unable to (correctly) bind to some hardware >> interrupts. I wonder if these messages from Xen's dmesg are relevant. >> (XEN) Not enabling x2APIC: depends on iommu_supports_eim. >> (XEN) I/O virtualisation disabled >> (XEN) Enabled directed EOI with ioapic_ack_old on! > The last one certainly isn't, and the first two shouldn't (albeit the > non-Xen kernel is running in x2APIC mode). That difference is likely > because the Xen and non-Xen boots are with differing BIOS > configurations, or on different machines: The non-Xen boot shows > a DMAR ACPI table, while the Xen one doesn't. Or wait, no, the > hypervisor and kernel-under-Xen logs differ in that respect too. We > clearly need a consistent set of logs. > > The one clearly odd thing in the hypervisor logs are these two lines > > (XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa > (XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa > > Can at least the left side address please be associated back with a > symbol (with the help of xen-syms perhaps)? As this is a debug message anyway, it would be sensible for the extable handler to print %pS of the left hand address. It would avoid needing to refer back to xen-syms in cases like this. ~Andrew ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 failed with error -110" 2014-05-16 10:08 ` Jan Beulich 2014-05-16 10:14 ` Andrew Cooper @ 2014-05-16 14:48 ` Ross Philipson 2014-05-16 15:18 ` Jan Beulich 2014-05-16 15:31 ` Ian Campbell 2 siblings, 1 reply; 24+ messages in thread From: Ross Philipson @ 2014-05-16 14:48 UTC (permalink / raw) To: Jan Beulich, Mike Egglestone, Ian Campbell Cc: 748052@bugs.debian.org, xen-devel On 05/16/2014 06:08 AM, Jan Beulich wrote: >>>> On 16.05.14 at 10:58, <ijc@hellion.org.uk> wrote: >> So it seems like dom0 is unable to (correctly) bind to some hardware >> interrupts. I wonder if these messages from Xen's dmesg are relevant. >> (XEN) Not enabling x2APIC: depends on iommu_supports_eim. >> (XEN) I/O virtualisation disabled >> (XEN) Enabled directed EOI with ioapic_ack_old on! > > The last one certainly isn't, and the first two shouldn't (albeit the > non-Xen kernel is running in x2APIC mode). That difference is likely > because the Xen and non-Xen boots are with differing BIOS > configurations, or on different machines: The non-Xen boot shows > a DMAR ACPI table, while the Xen one doesn't. Doesn't Xen hide the DMAR from dom0 on purpose? I think it renames it to XMAR IIRC. > Or wait, no, the > hypervisor and kernel-under-Xen logs differ in that respect too. We > clearly need a consistent set of logs. > > The one clearly odd thing in the hypervisor logs are these two lines > > (XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa > (XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa > > Can at least the left side address please be associated back with a > symbol (with the help of xen-syms perhaps)? > > And finally, looking at the IRQ usage, this > > [ 2.087722] xen: registering gsi 22 triggering 0 polarity 1 > [ 2.087731] xen: --> pirq=22 -> irq=22 (gsi=22) > [ 2.100161] xen: registering gsi 20 triggering 0 polarity 1 > [ 2.100166] xen: --> pirq=20 -> irq=20 (gsi=20) > > happens rather early - it's not clear to me in which context that is. > And there's no problem with GSI 22 used by the other EHCI HC, so > a fundamental question is what other device(s) is/are using GSI 20 > (not visible from the non-Xen kernel log). > > Jan > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xen.org > http://lists.xen.org/xen-devel > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2014.0.4577 / Virus Database: 3950/7484 - Release Date: 05/12/14 > -- Ross Philipson ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 failed with error -110" 2014-05-16 14:48 ` Ross Philipson @ 2014-05-16 15:18 ` Jan Beulich 0 siblings, 0 replies; 24+ messages in thread From: Jan Beulich @ 2014-05-16 15:18 UTC (permalink / raw) To: Ross Philipson Cc: 748052@bugs.debian.org, xen-devel, Mike Egglestone, IanCampbell >>> On 16.05.14 at 16:48, <ross.philipson@citrix.com> wrote: > On 05/16/2014 06:08 AM, Jan Beulich wrote: >>>>> On 16.05.14 at 10:58, <ijc@hellion.org.uk> wrote: >>> So it seems like dom0 is unable to (correctly) bind to some hardware >>> interrupts. I wonder if these messages from Xen's dmesg are relevant. >>> (XEN) Not enabling x2APIC: depends on iommu_supports_eim. >>> (XEN) I/O virtualisation disabled >>> (XEN) Enabled directed EOI with ioapic_ack_old on! >> >> The last one certainly isn't, and the first two shouldn't (albeit the >> non-Xen kernel is running in x2APIC mode). That difference is likely >> because the Xen and non-Xen boots are with differing BIOS >> configurations, or on different machines: The non-Xen boot shows >> a DMAR ACPI table, while the Xen one doesn't. > > Doesn't Xen hide the DMAR from dom0 on purpose? I think it renames it to > XMAR IIRC. Sure. It's XMAR in the kernel-on-Xen log, but there's no DMAR in the Xen one. Jan ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 failed with error -110" 2014-05-16 10:08 ` Jan Beulich 2014-05-16 10:14 ` Andrew Cooper 2014-05-16 14:48 ` Ross Philipson @ 2014-05-16 15:31 ` Ian Campbell 2014-05-16 15:51 ` Jan Beulich ` (3 more replies) 2 siblings, 4 replies; 24+ messages in thread From: Ian Campbell @ 2014-05-16 15:31 UTC (permalink / raw) To: Jan Beulich; +Cc: 748052, Mike Egglestone, xen-devel On Fri, 2014-05-16 at 11:08 +0100, Jan Beulich wrote: Thanks for taking a look. FYI Mike has since mentioned on the bug report that 4.1 worked. I've asked for logs of Xen 4.1 + Linux 3.13 and Xen 4.3 + Linux 3.13 for comparison. > >>> On 16.05.14 at 10:58, <ijc@hellion.org.uk> wrote: > > So it seems like dom0 is unable to (correctly) bind to some hardware > > interrupts. I wonder if these messages from Xen's dmesg are relevant. > > (XEN) Not enabling x2APIC: depends on iommu_supports_eim. > > (XEN) I/O virtualisation disabled > > (XEN) Enabled directed EOI with ioapic_ack_old on! > > The last one certainly isn't, and the first two shouldn't (albeit the > non-Xen kernel is running in x2APIC mode). That difference is likely > because the Xen and non-Xen boots are with differing BIOS > configurations, or on different machines: The non-Xen boot shows > a DMAR ACPI table, while the Xen one doesn't. Or wait, no, the > hypervisor and kernel-under-Xen logs differ in that respect too. We > clearly need a consistent set of logs. Mike -- did both of the logs with Xen come from the same system? Since you resent the Xen ones I expect it wasn't the same boot, but at least the same machine, right? > The one clearly odd thing in the hypervisor logs are these two lines > > (XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa > (XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa > > Can at least the left side address please be associated back with a > symbol (with the help of xen-syms perhaps)? Sadly I don't think the Debian packages currently retain these. Mike, the easiest way to gather these might be apt-get source xen=<pkg-version> cd xen-XXX make -C xen Then boot with the resulting xen/xen.gz. Then xen/xen-syms is the symbol file which Jan refers to. > > And finally, looking at the IRQ usage, this > > [ 2.087722] xen: registering gsi 22 triggering 0 polarity 1 > [ 2.087731] xen: --> pirq=22 -> irq=22 (gsi=22) > [ 2.100161] xen: registering gsi 20 triggering 0 polarity 1 > [ 2.100166] xen: --> pirq=20 -> irq=20 (gsi=20) > > happens rather early - it's not clear to me in which context that is. > And there's no problem with GSI 22 used by the other EHCI HC, so > a fundamental question is what other device(s) is/are using GSI 20 > (not visible from the non-Xen kernel log). Would this be visible in /proc/interrupts when not running under Xen? Ian. ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 failed with error -110" 2014-05-16 15:31 ` Ian Campbell @ 2014-05-16 15:51 ` Jan Beulich 2014-05-16 16:04 ` dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile Mike Egglestone [not found] ` <fc.011fc823e66acc6f3b9aca005d0d88ff.e66acc76@estone.ca> 2014-05-16 15:55 ` dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 failed with error -110" Jan Beulich ` (2 subsequent siblings) 3 siblings, 2 replies; 24+ messages in thread From: Jan Beulich @ 2014-05-16 15:51 UTC (permalink / raw) To: Ian Campbell; +Cc: 748052, Mike Egglestone, xen-devel >>> On 16.05.14 at 17:31, <ijc@hellion.org.uk> wrote: > On Fri, 2014-05-16 at 11:08 +0100, Jan Beulich wrote: >> And finally, looking at the IRQ usage, this >> >> [ 2.087722] xen: registering gsi 22 triggering 0 polarity 1 >> [ 2.087731] xen: --> pirq=22 -> irq=22 (gsi=22) >> [ 2.100161] xen: registering gsi 20 triggering 0 polarity 1 >> [ 2.100166] xen: --> pirq=20 -> irq=20 (gsi=20) >> >> happens rather early - it's not clear to me in which context that is. >> And there's no problem with GSI 22 used by the other EHCI HC, so >> a fundamental question is what other device(s) is/are using GSI 20 >> (not visible from the non-Xen kernel log). > > Would this be visible in /proc/interrupts when not running under Xen? Possibly, but not necessarily (the fact that these messages show up so early, without any connection to a driver being loaded, kind of puzzle me - I wonder whether they're associated with one of the PCI bridges, which lspci may be able to tell us). Jan ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile 2014-05-16 15:51 ` Jan Beulich @ 2014-05-16 16:04 ` Mike Egglestone [not found] ` <fc.011fc823e66acc6f3b9aca005d0d88ff.e66acc76@estone.ca> 1 sibling, 0 replies; 24+ messages in thread From: Mike Egglestone @ 2014-05-16 16:04 UTC (permalink / raw) To: 748052, xen-devel [-- Attachment #1.1: Type: text/plain, Size: 259 bytes --] Attached are the most recent boot logs. All tests have been on the same system, an Intel S1200BTL motherboard. I did 2 boots, both with kernel 3.13. First one into xen 4.3 and the 2nd into xen 4.1. The keyboard works on xen 4.1, not on 4.3. Cheers, Mike [-- Attachment #1.2: Type: text/html, Size: 1898 bytes --] [-- Attachment #2: xen4.1dmesg.txt --] [-- Type: text/plain, Size: 62393 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Debian 3.13.10-1 (2014-04-15) [ 0.000000] Command line: placeholder root=UUID=24e080dd-79b1-444c-8a7d-36e54ed2f4ca ro quiet [ 0.000000] Freeing 9b-100 pfn range: 101 pages freed [ 0.000000] 1-1 mapping on 9b->100 [ 0.000000] Freeing ab9a7-bba28 pfn range: 65665 pages freed [ 0.000000] 1-1 mapping on ab9a7->bba28 [ 0.000000] Freeing bc483-bc5b9 pfn range: 310 pages freed [ 0.000000] 1-1 mapping on bc483->bc5b9 [ 0.000000] Freeing beadd-beaee pfn range: 17 pages freed [ 0.000000] 1-1 mapping on beadd->beaee [ 0.000000] Freeing bed27-befff pfn range: 728 pages freed [ 0.000000] 1-1 mapping on bed27->befff [ 0.000000] Freeing bf000-100000 pfn range: 266240 pages freed [ 0.000000] 1-1 mapping on bf000->100000 [ 0.000000] Released 333061 pages of unused memory [ 0.000000] Set 333061 page(s) to 1-1 mapping [ 0.000000] Populating 1dfa33-230f38 pfn range: 333061 pages added [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x00000000ab9a6fff] usable [ 0.000000] Xen: [mem 0x00000000ab9a7000-0x00000000bba27fff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bba28000-0x00000000bc482fff] usable [ 0.000000] Xen: [mem 0x00000000bc483000-0x00000000bc5b8fff] reserved [ 0.000000] Xen: [mem 0x00000000bc5b9000-0x00000000beadcfff] usable [ 0.000000] Xen: [mem 0x00000000beadd000-0x00000000beaedfff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000bed26fff] usable [ 0.000000] Xen: [mem 0x00000000bed27000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000befff000-0x00000000beffffff] usable [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x000000023fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation S1200BTL/S1200BTL, BIOS S1200BT.86B.02.00.0041.120520121743 12/05/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x230c00000-0x230dfffff] [ 0.000000] [mem 0x230c00000-0x230dfffff] page 4k [ 0.000000] BRK [0x01ab9000, 0x01ab9fff] PGTABLE [ 0.000000] BRK [0x01aba000, 0x01abafff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x230000000-0x230bfffff] [ 0.000000] [mem 0x230000000-0x230bfffff] page 4k [ 0.000000] BRK [0x01abb000, 0x01abbfff] PGTABLE [ 0.000000] BRK [0x01abc000, 0x01abcfff] PGTABLE [ 0.000000] BRK [0x01abd000, 0x01abdfff] PGTABLE [ 0.000000] BRK [0x01abe000, 0x01abefff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x200000000-0x22fffffff] [ 0.000000] [mem 0x200000000-0x22fffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x00100000-0xab9a6fff] [ 0.000000] [mem 0x00100000-0xab9a6fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbba28000-0xbc482fff] [ 0.000000] [mem 0xbba28000-0xbc482fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbc5b9000-0xbeadcfff] [ 0.000000] [mem 0xbc5b9000-0xbeadcfff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbeaee000-0xbed26fff] [ 0.000000] [mem 0xbeaee000-0xbed26fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbefff000-0xbeffffff] [ 0.000000] [mem 0xbefff000-0xbeffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x230e00000-0x23fffffff] [ 0.000000] [mem 0x230e00000-0x23fffffff] page 4k [ 0.000000] RAMDISK: [mem 0x01ebc000-0x044a3fff] [ 0.000000] ACPI: RSDP 00000000000f0410 000024 (v02 INTEL) [ 0.000000] ACPI: XSDT 00000000beffde18 0000B4 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: FACP 00000000beffcd98 0000F4 (v04 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: DSDT 00000000befee018 00CE48 (v02 INTEL S1200BTL 00000000 INTL 20100331) [ 0.000000] ACPI: FACS 00000000beffdd40 000040 [ 0.000000] ACPI: APIC 00000000beffb018 000652 (v03 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: SPMI 00000000beffec98 000040 (v05 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: MCFG 00000000beffec18 00003C (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: WDDT 00000000beffef18 000040 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: HPET 00000000beffee98 000038 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: SSDT 00000000befeb018 0010A8 (v02 INTEL S1200BTL 00001000 INTL 20100331) [ 0.000000] ACPI: BOOT 00000000beffee18 000028 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: SSDT 00000000befe7698 0005E0 (v02 INTEL S1200BTL 00003000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000befe6018 000A92 (v02 INTEL S1200BTL 00003000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000befea598 00054D (v01 INTEL S1200BTL 00001000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000beffdb18 000069 (v01 INTEL S1200BTL 00001000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000befe9e18 00017B (v02 INTEL S1200BTL 00002000 INTL 20100331) [ 0.000000] ACPI: XMAR 00000000befe8f18 000078 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: HEST 00000000beffcf18 0000A8 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 00000000beffed98 000030 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 00000000befe8c98 000230 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 00000000beffc918 000130 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff] [ 0.000000] NODE_DATA [mem 0x230f33000-0x230f37fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x23fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009afff] [ 0.000000] node 0: [mem 0x00100000-0xab9a6fff] [ 0.000000] node 0: [mem 0xbba28000-0xbc482fff] [ 0.000000] node 0: [mem 0xbc5b9000-0xbeadcfff] [ 0.000000] node 0: [mem 0xbeaee000-0xbed26fff] [ 0.000000] node 0: [mem 0xbefff000-0xbeffffff] [ 0.000000] node 0: [mem 0x100000000-0x23fffffff] [ 0.000000] On node 0 totalpages: 2026234 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3994 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9728 pages used for memmap [ 0.000000] DMA32 zone: 711520 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: X2APIC (apic_id[0x00] uid[0x00] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x01] uid[0x01] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x02] uid[0x02] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x03] uid[0x03] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x04] uid[0x04] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x05] uid[0x05] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x06] uid[0x06] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x07] uid[0x07] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x08] uid[0x08] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x09] uid[0x09] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0a] uid[0x0a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0b] uid[0x0b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0c] uid[0x0c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0d] uid[0x0d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0e] uid[0x0e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0f] uid[0x0f] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x10] uid[0x10] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x11] uid[0x11] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x12] uid[0x12] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x13] uid[0x13] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x14] uid[0x14] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x15] uid[0x15] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x16] uid[0x16] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x17] uid[0x17] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x18] uid[0x18] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x19] uid[0x19] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1a] uid[0x1a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1b] uid[0x1b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1c] uid[0x1c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1d] uid[0x1d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1e] uid[0x1e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1f] uid[0x1f] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x20] uid[0x20] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x21] uid[0x21] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x22] uid[0x22] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x23] uid[0x23] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x24] uid[0x24] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x25] uid[0x25] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x26] uid[0x26] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x27] uid[0x27] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x28] uid[0x28] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x29] uid[0x29] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2a] uid[0x2a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2b] uid[0x2b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2c] uid[0x2c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2d] uid[0x2d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2e] uid[0x2e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2f] uid[0x2f] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x30] uid[0x30] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x31] uid[0x31] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x32] uid[0x32] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x33] uid[0x33] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x34] uid[0x34] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x35] uid[0x35] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x36] uid[0x36] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x37] uid[0x37] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x38] uid[0x38] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x39] uid[0x39] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3a] uid[0x3a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3b] uid[0x3b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3c] uid[0x3c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3d] uid[0x3d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3e] uid[0x3e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3f] uid[0x3f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x21] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x22] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x23] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x24] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x25] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x26] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x27] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x28] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x29] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x30] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x31] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x32] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x33] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x34] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x35] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x36] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x37] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x38] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x39] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 128 CPUs, 120 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xab9a7000-0xbba27fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc483000-0xbc5b8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbeadd000-0xbeaedfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbed27000-0xbeddffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbede0000-0xbefdffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbefe0000-0xbeffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed18fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed19000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1.4 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:128 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880226800000 s85824 r8192 d20672 u131072 [ 0.000000] pcpu-alloc: s85824 r8192 d20672 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 000 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 [ 0.000000] pcpu-alloc: [0] 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 [ 0.000000] pcpu-alloc: [0] 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 [ 0.000000] pcpu-alloc: [0] 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 [ 0.000000] pcpu-alloc: [0] 064 065 066 067 068 069 070 071 072 073 074 075 076 077 078 079 [ 0.000000] pcpu-alloc: [0] 080 081 082 083 084 085 086 087 088 089 090 091 092 093 094 095 [ 0.000000] pcpu-alloc: [0] 096 097 098 099 100 101 102 103 104 105 106 107 108 109 110 111 [ 0.000000] pcpu-alloc: [0] 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 [ 2.146777] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1998509 [ 2.146778] Policy zone: Normal [ 2.146780] Kernel command line: placeholder root=UUID=24e080dd-79b1-444c-8a7d-36e54ed2f4ca ro quiet [ 2.146954] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 2.175484] software IO TLB [mem 0x222800000-0x226800000] (64MB) mapped at [ffff880222800000-ffff8802267fffff] [ 2.204973] Memory: 7583472K/8104936K available (4811K kernel code, 693K rwdata, 1620K rodata, 984K init, 952K bss, 521464K reserved) [ 2.205027] Hierarchical RCU implementation. [ 2.205028] RCU dyntick-idle grace-period acceleration is enabled. [ 2.205028] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 2.205034] NR_IRQS:33024 nr_irqs:744 16 [ 2.205085] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 2.205087] xen: registering gsi 9 triggering 0 polarity 0 [ 2.205094] xen: --> pirq=9 -> irq=9 (gsi=9) [ 2.205112] xen: acpi sci 9 [ 2.205114] xen: --> pirq=1 -> irq=1 (gsi=1) [ 2.205116] xen: --> pirq=2 -> irq=2 (gsi=2) [ 2.205118] xen: --> pirq=3 -> irq=3 (gsi=3) [ 2.205119] xen: --> pirq=4 -> irq=4 (gsi=4) [ 2.205120] xen: --> pirq=5 -> irq=5 (gsi=5) [ 2.205122] xen: --> pirq=6 -> irq=6 (gsi=6) [ 2.205123] xen: --> pirq=7 -> irq=7 (gsi=7) [ 2.205124] xen: --> pirq=8 -> irq=8 (gsi=8) [ 2.205126] xen: --> pirq=10 -> irq=10 (gsi=10) [ 2.205127] xen: --> pirq=11 -> irq=11 (gsi=11) [ 2.205129] xen: --> pirq=12 -> irq=12 (gsi=12) [ 2.205130] xen: --> pirq=13 -> irq=13 (gsi=13) [ 2.205131] xen: --> pirq=14 -> irq=14 (gsi=14) [ 2.205133] xen: --> pirq=15 -> irq=15 (gsi=15) [ 2.213648] Console: colour VGA+ 80x25 [ 2.213730] console [tty0] enabled [ 2.213751] Xen: using vcpuop timer interface [ 2.213754] installing Xen timer for CPU 0 [ 2.213771] tsc: Detected 3292.650 MHz processor [ 2.213775] Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.30 BogoMIPS (lpj=13170600) [ 2.213777] pid_max: default: 32768 minimum: 301 [ 2.213794] Security Framework initialized [ 2.213797] AppArmor: AppArmor disabled by boot time parameter [ 2.213798] Yama: disabled by default; enable with sysctl kernel.yama.* [ 2.214586] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 2.216672] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 2.217537] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 2.217550] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 2.217731] Initializing cgroup subsys memory [ 2.217736] Initializing cgroup subsys devices [ 2.217737] Initializing cgroup subsys freezer [ 2.217738] Initializing cgroup subsys blkio [ 2.217739] Initializing cgroup subsys perf_event [ 2.217783] CPU: Physical Processor ID: 0 [ 2.217784] CPU: Processor Core ID: 0 [ 2.218072] mce: CPU supports 9 MCE banks [ 2.218095] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 2.218095] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 2.218095] tlb_flushall_shift: 2 [ 2.218156] Freeing SMP alternatives memory: 20K (ffffffff819a5000 - ffffffff819aa000) [ 2.218974] ACPI: Core revision 20131115 [ 2.223266] ACPI: All ACPI Tables successfully acquired [ 2.225586] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 2.225757] NMI watchdog: disabled (cpu0): hardware events not enabled [ 2.225811] installing Xen timer for CPU 1 [ 2.226289] installing Xen timer for CPU 2 [ 2.226719] installing Xen timer for CPU 3 [ 2.227138] installing Xen timer for CPU 4 [ 2.227577] installing Xen timer for CPU 5 [ 2.228007] installing Xen timer for CPU 6 [ 2.228447] installing Xen timer for CPU 7 [ 2.228835] x86: Booted up 1 node, 8 CPUs [ 2.229029] devtmpfs: initialized [ 2.231042] PM: Registering ACPI NVS region [mem 0xab9a7000-0xbba27fff] (268963840 bytes) [ 2.234446] PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 2.234610] xen:grant_table: Grant tables using version 2 layout [ 2.234619] Grant table initialized [ 2.234671] NET: Registered protocol family 16 [ 2.234803] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 2.234804] ACPI: bus type PCI registered [ 2.234806] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 2.234952] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 2.234954] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 2.242897] PCI: Using configuration type 1 for base access [ 2.243427] bio: create slab <bio-0> at 0 [ 2.243605] ACPI: Added _OSI(Module Device) [ 2.243607] ACPI: Added _OSI(Processor Device) [ 2.243608] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.243608] ACPI: Added _OSI(Processor Aggregator Device) [ 2.245655] ACPI: Executed 1 blocks of module-level executable AML code [ 2.270579] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 2.271097] ACPI: SSDT 00000000bedbb018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 2.271340] ACPI: Dynamic OEM Table Load: [ 2.271341] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 2.282900] ACPI: SSDT 00000000bedbca98 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 2.283161] ACPI: Dynamic OEM Table Load: [ 2.283162] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 2.294979] ACPI: SSDT 00000000bedbad98 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 2.295216] ACPI: Dynamic OEM Table Load: [ 2.295217] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 2.307901] ACPI: Interpreter enabled [ 2.307909] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 2.307914] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580) [ 2.307918] ACPI: (supports S0 S1 S3 S5) [ 2.307919] ACPI: Using IOAPIC for interrupt routing [ 2.307953] HEST: Table parsing has been initialized. [ 2.307955] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.308135] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 2.312296] ACPI: Power Resource [FN00] (off) [ 2.312348] ACPI: Power Resource [FN01] (off) [ 2.312397] ACPI: Power Resource [FN02] (off) [ 2.312447] ACPI: Power Resource [FN03] (off) [ 2.312495] ACPI: Power Resource [FN04] (off) [ 2.312893] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 2.312897] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 2.313184] acpi PNP0A08:00: _OSC: platform does not support [AER] [ 2.313502] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 2.313984] PCI host bridge to bus 0000:00 [ 2.313986] pci_bus 0000:00: root bus resource [bus 00-3e] [ 2.313988] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 2.313989] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 2.313990] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 2.313991] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff] [ 2.313992] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 2.313993] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 2.313994] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 2.313995] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 2.313996] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 2.313998] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 2.313999] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff] [ 2.314000] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 2.314010] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 [ 2.314197] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 2.314237] pci 0000:00:19.0: reg 0x10: [mem 0xc2500000-0xc251ffff] [ 2.314255] pci 0000:00:19.0: reg 0x14: [mem 0xc2570000-0xc2570fff] [ 2.314272] pci 0000:00:19.0: reg 0x18: [io 0x5040-0x505f] [ 2.314422] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 2.314471] pci 0000:00:19.0: System wakeup disabled by ACPI [ 2.314516] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 2.314556] pci 0000:00:1a.0: reg 0x10: [mem 0xc2560000-0xc25603ff] [ 2.314738] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.314797] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 2.314837] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 2.315005] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.315059] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 2.315102] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 2.315277] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 2.315332] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 2.315369] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400 [ 2.315538] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 2.315592] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 2.315639] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 2.315680] pci 0000:00:1d.0: reg 0x10: [mem 0xc2550000-0xc25503ff] [ 2.315860] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.315918] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 2.315953] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.316103] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 2.316137] pci 0000:00:1f.0: [8086:1c54] type 00 class 0x060100 [ 2.316397] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 2.316442] pci 0000:00:1f.2: reg 0x10: [io 0x5090-0x5097] [ 2.316459] pci 0000:00:1f.2: reg 0x14: [io 0x5080-0x5083] [ 2.316474] pci 0000:00:1f.2: reg 0x18: [io 0x5070-0x5077] [ 2.316491] pci 0000:00:1f.2: reg 0x1c: [io 0x5060-0x5063] [ 2.316508] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f] [ 2.316525] pci 0000:00:1f.2: reg 0x24: [mem 0xc2540000-0xc25407ff] [ 2.316640] pci 0000:00:1f.2: PME# supported from D3hot [ 2.316717] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 2.316747] pci 0000:00:1f.3: reg 0x10: [mem 0xc2530000-0xc25300ff 64bit] [ 2.316796] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f] [ 2.316989] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 2.316995] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 2.317001] pci 0000:00:1c.0: bridge window [mem 0xc1900000-0xc22fffff] [ 2.317011] pci 0000:00:1c.0: bridge window [mem 0xc2600000-0xc2ffffff 64bit pref] [ 2.317175] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 [ 2.317219] pci 0000:02:00.0: reg 0x10: [mem 0xc2400000-0xc241ffff] [ 2.317278] pci 0000:02:00.0: reg 0x18: [io 0x3000-0x301f] [ 2.317309] pci 0000:02:00.0: reg 0x1c: [mem 0xc2420000-0xc2423fff] [ 2.317570] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 2.317640] pci 0000:02:00.0: System wakeup disabled by ACPI [ 2.323316] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 2.323326] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 2.323335] pci 0000:00:1c.4: bridge window [mem 0xc2400000-0xc24fffff] [ 2.323494] pci 0000:03:00.0: [102b:0522] type 00 class 0x030000 [ 2.323527] pci 0000:03:00.0: reg 0x10: [mem 0xc0000000-0xc0ffffff] [ 2.323550] pci 0000:03:00.0: reg 0x14: [mem 0xc1810000-0xc1813fff] [ 2.323574] pci 0000:03:00.0: reg 0x18: [mem 0xc1000000-0xc17fffff] [ 2.323665] pci 0000:03:00.0: reg 0x30: [mem 0xc1800000-0xc180ffff pref] [ 2.323817] pci 0000:03:00.0: System wakeup disabled by ACPI [ 2.331423] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 2.331439] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc18fffff] [ 2.331535] pci 0000:04:00.0: [8086:100e] type 00 class 0x020000 [ 2.331572] pci 0000:04:00.0: reg 0x10: [mem 0xc2340000-0xc235ffff] [ 2.331589] pci 0000:04:00.0: reg 0x14: [mem 0xc2320000-0xc233ffff] [ 2.331606] pci 0000:04:00.0: reg 0x18: [io 0x2000-0x203f] [ 2.331672] pci 0000:04:00.0: reg 0x30: [mem 0xc2300000-0xc231ffff pref] [ 2.331757] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 2.331869] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 2.331875] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] [ 2.331881] pci 0000:00:1e.0: bridge window [mem 0xc2300000-0xc23fffff] [ 2.331891] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 2.331892] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 2.331893] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 2.331895] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode) [ 2.331896] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 2.331897] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 2.331898] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 2.331899] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 2.331900] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 2.331901] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 2.331903] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode) [ 2.331904] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) [ 2.331956] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 2.332337] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.332377] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.332415] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.332454] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.332496] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.332535] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10 11 12 14 15) [ 2.332574] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 2.332612] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.332830] ACPI: Enabled 7 GPEs in block 00 to 3F [ 2.332835] ACPI: \_SB_.PCI0: notify handler is installed [ 2.332869] Found 1 acpi root devices [ 2.332896] xen:balloon: Initialising balloon driver [ 2.333631] xen_balloon: Initialising balloon driver [ 2.333690] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 2.333691] vgaarb: loaded [ 2.333691] vgaarb: bridge control possible 0000:03:00.0 [ 2.333716] PCI: Using ACPI for IRQ routing [ 2.337973] PCI: pci_cache_line_size set to 64 bytes [ 2.338050] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 2.338051] e820: reserve RAM buffer [mem 0xab9a7000-0xabffffff] [ 2.338052] e820: reserve RAM buffer [mem 0xbc483000-0xbfffffff] [ 2.338053] e820: reserve RAM buffer [mem 0xbeadd000-0xbfffffff] [ 2.338054] e820: reserve RAM buffer [mem 0xbed27000-0xbfffffff] [ 2.338055] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff] [ 2.338141] Switched to clocksource xen [ 2.339204] pnp: PnP ACPI init [ 2.339211] ACPI: bus type PNP registered [ 2.339241] pnp 00:00: [dma 4] [ 2.339252] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 2.339266] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 2.339325] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 2.339331] xen: registering gsi 13 triggering 1 polarity 0 [ 2.339357] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 2.339383] system 00:04: [io 0x0680-0x069f] has been reserved [ 2.339385] system 00:04: [io 0xffff] has been reserved [ 2.339386] system 00:04: [io 0xffff] has been reserved [ 2.339387] system 00:04: [io 0xffff] has been reserved [ 2.339389] system 00:04: [io 0x0400-0x0453] could not be reserved [ 2.339390] system 00:04: [io 0x0458-0x047f] has been reserved [ 2.339391] system 00:04: [io 0x0500-0x057f] has been reserved [ 2.339393] system 00:04: [io 0x164e-0x164f] has been reserved [ 2.339394] system 00:04: [io 0x0900-0x090f] has been reserved [ 2.339396] system 00:04: [io 0x0295-0x0296] has been reserved [ 2.339397] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.339402] xen: registering gsi 8 triggering 1 polarity 0 [ 2.339425] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.339453] system 00:06: [io 0x0454-0x0457] has been reserved [ 2.339455] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 2.339617] xen: registering gsi 4 triggering 1 polarity 0 [ 2.339633] pnp 00:07: [dma 0 disabled] [ 2.339667] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.339795] xen: registering gsi 3 triggering 1 polarity 0 [ 2.339811] pnp 00:08: [dma 0 disabled] [ 2.339842] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.339970] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.339972] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 2.339973] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.339975] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.339976] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 2.339977] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.339978] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 2.339980] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 2.339981] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 2.339983] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 2.339984] system 00:09: [mem 0xc2590000-0xc2590fff] has been reserved [ 2.339985] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.340152] system 00:0a: [mem 0x00000000-0x0009cfff] could not be reserved [ 2.340154] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.340187] pnp: PnP ACPI: found 11 devices [ 2.340188] ACPI: bus type PNP unregistered [ 2.344896] PM-Timer failed consistency check (0xffffff) - aborting. [ 2.344959] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 2.344962] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 2.344970] pci 0000:00:1c.0: bridge window [mem 0xc1900000-0xc22fffff] [ 2.344975] pci 0000:00:1c.0: bridge window [mem 0xc2600000-0xc2ffffff 64bit pref] [ 2.344985] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 2.344989] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 2.344997] pci 0000:00:1c.4: bridge window [mem 0xc2400000-0xc24fffff] [ 2.345011] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 2.345019] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc18fffff] [ 2.345034] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 2.345037] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] [ 2.345045] pci 0000:00:1e.0: bridge window [mem 0xc2300000-0xc23fffff] [ 2.345060] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.345061] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.345062] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.345064] pci_bus 0000:00: resource 7 [mem 0x000cc000-0x000cffff] [ 2.345065] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000d3fff] [ 2.345066] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff] [ 2.345067] pci_bus 0000:00: resource 10 [mem 0x000d8000-0x000dbfff] [ 2.345068] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000dffff] [ 2.345069] pci_bus 0000:00: resource 12 [mem 0x000e0000-0x000e3fff] [ 2.345070] pci_bus 0000:00: resource 13 [mem 0x000e4000-0x000e7fff] [ 2.345071] pci_bus 0000:00: resource 14 [mem 0xc0000000-0xfeafffff] [ 2.345072] pci_bus 0000:00: resource 15 [mem 0xfed40000-0xfed44fff] [ 2.345073] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 2.345074] pci_bus 0000:01: resource 1 [mem 0xc1900000-0xc22fffff] [ 2.345076] pci_bus 0000:01: resource 2 [mem 0xc2600000-0xc2ffffff 64bit pref] [ 2.345077] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 2.345078] pci_bus 0000:02: resource 1 [mem 0xc2400000-0xc24fffff] [ 2.345079] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc18fffff] [ 2.345080] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 2.345081] pci_bus 0000:04: resource 1 [mem 0xc2300000-0xc23fffff] [ 2.345082] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 2.345083] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 2.345085] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 2.345086] pci_bus 0000:04: resource 7 [mem 0x000cc000-0x000cffff] [ 2.345087] pci_bus 0000:04: resource 8 [mem 0x000d0000-0x000d3fff] [ 2.345088] pci_bus 0000:04: resource 9 [mem 0x000d4000-0x000d7fff] [ 2.345089] pci_bus 0000:04: resource 10 [mem 0x000d8000-0x000dbfff] [ 2.345090] pci_bus 0000:04: resource 11 [mem 0x000dc000-0x000dffff] [ 2.345091] pci_bus 0000:04: resource 12 [mem 0x000e0000-0x000e3fff] [ 2.345092] pci_bus 0000:04: resource 13 [mem 0x000e4000-0x000e7fff] [ 2.345093] pci_bus 0000:04: resource 14 [mem 0xc0000000-0xfeafffff] [ 2.345094] pci_bus 0000:04: resource 15 [mem 0xfed40000-0xfed44fff] [ 2.345163] NET: Registered protocol family 2 [ 2.345367] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 2.345574] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.345781] TCP: Hash tables configured (established 65536 bind 65536) [ 2.345800] TCP: reno registered [ 2.345816] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 2.345856] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 2.345953] NET: Registered protocol family 1 [ 2.346008] xen: registering gsi 22 triggering 0 polarity 1 [ 2.346015] xen: --> pirq=22 -> irq=22 (gsi=22) [ 2.362333] xen: registering gsi 20 triggering 0 polarity 1 [ 2.362340] xen: --> pirq=20 -> irq=20 (gsi=20) [ 2.378311] pci 0000:03:00.0: Boot video device [ 2.378318] PCI: CLS 64 bytes, default 64 [ 2.378349] Unpacking initramfs... [ 2.406903] Freeing initrd memory: 38816K (ffff880001ebc000 - ffff8800044a4000) [ 2.407031] Simple Boot Flag at 0x4f set to 0x1 [ 2.407293] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 2.407498] audit: initializing netlink socket (disabled) [ 2.407507] type=2000 audit(1400255464.401:1): initialized [ 2.417065] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.417307] VFS: Disk quotas dquot_6.5.2 [ 2.417330] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.417391] msgmni has been set to 14887 [ 2.417633] alg: No test for stdrng (krng) [ 2.417658] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.417698] io scheduler noop registered [ 2.417699] io scheduler deadline registered [ 2.417720] io scheduler cfq registered (default) [ 2.417826] xen: registering gsi 16 triggering 0 polarity 1 [ 2.417836] xen: --> pirq=16 -> irq=16 (gsi=16) [ 2.418071] xen: registering gsi 16 triggering 0 polarity 1 [ 2.418073] Already setup the GSI :16 [ 2.418264] xen: registering gsi 16 triggering 0 polarity 1 [ 2.418266] Already setup the GSI :16 [ 2.418457] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 2.418464] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 2.418492] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 2.418493] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 2.418499] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 2.418526] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 2.418527] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 2.418533] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 2.418541] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.418572] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 1c10 ss_vid 8086 ss_did 7270 [ 2.418611] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded [ 2.418614] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.418635] intel_idle: does not run on family 6 model 58 [ 2.418680] ERST: Error Record Serialization Table (ERST) support is initialized. [ 2.418682] pstore: Registered erst as persistent store backend [ 2.418814] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 2.419114] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.439941] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.460771] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.461002] hpet_acpi_add: no address or irqs in _CRS [ 2.461015] Linux agpgart interface v0.103 [ 2.461075] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.977671] i8042: Can't read CTR while initializing i8042 [ 2.977754] i8042: probe of i8042 failed with error -5 [ 2.977817] mousedev: PS/2 mouse device common for all mice [ 2.977858] rtc_cmos 00:05: RTC can wake from S4 [ 2.978021] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.978080] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram [ 2.978087] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> [ 2.978088] AMD IOMMUv2 functionality not available on this system [ 2.978165] TCP: cubic registered [ 2.978236] NET: Registered protocol family 10 [ 2.978376] mip6: Mobile IPv6 [ 2.978377] NET: Registered protocol family 17 [ 2.978379] mpls_gso: MPLS GSO support [ 2.978572] registered taskstats version 1 [ 2.979063] rtc_cmos 00:05: setting system clock to 2014-05-16 15:51:04 UTC (1400255464) [ 2.979090] PM: Hibernation image not present or could not be loaded. [ 2.979378] Freeing unused kernel memory: 984K (ffffffff818af000 - ffffffff819a5000) [ 2.979379] Write protecting the kernel read-only data: 8192k [ 2.981249] Freeing unused kernel memory: 1324K (ffff8800014b5000 - ffff880001600000) [ 2.981399] Freeing unused kernel memory: 428K (ffff880001795000 - ffff880001800000) [ 2.996428] systemd-udevd[90]: starting version 204 [ 3.014282] ACPI: bus type USB registered [ 3.014314] usbcore: registered new interface driver usbfs [ 3.014325] usbcore: registered new interface driver hub [ 3.014400] pps_core: LinuxPPS API ver. 1 registered [ 3.014402] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 3.014706] PTP clock support registered [ 3.014849] usbcore: registered new device driver usb [ 3.015277] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.015499] ehci-pci: EHCI PCI platform driver [ 3.015661] xen: registering gsi 22 triggering 0 polarity 1 [ 3.015668] Already setup the GSI :22 [ 3.015713] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.015718] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.015743] ehci-pci 0000:00:1a.0: debug port 2 [ 3.015934] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 3.015936] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 3.019673] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 3.019732] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc2560000 [ 3.028526] ACPI: Fan [FAN0] (off) [ 3.028569] ACPI: Fan [FAN1] (off) [ 3.028609] ACPI: Fan [FAN2] (off) [ 3.028647] ACPI: Fan [FAN3] (off) [ 3.028684] ACPI: Fan [FAN4] (off) [ 3.029244] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.029247] ACPI: Thermal Zone [TZ00] (28 C) [ 3.029463] thermal LNXTHERM:01: registered as thermal_zone1 [ 3.029467] ACPI: Thermal Zone [TZ01] (30 C) [ 3.030211] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.030271] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.030275] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.030277] usb usb1: Product: EHCI Host Controller [ 3.030280] usb usb1: Manufacturer: Linux 3.13-1-amd64 ehci_hcd [ 3.030282] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.030436] hub 1-0:1.0: USB hub found [ 3.030451] hub 1-0:1.0: 2 ports detected [ 3.030700] xen: registering gsi 20 triggering 0 polarity 1 [ 3.030706] Already setup the GSI :20 [ 3.030750] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.030758] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.030785] ehci-pci 0000:00:1d.0: debug port 2 [ 3.034408] SCSI subsystem initialized [ 3.034719] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 3.034801] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc2550000 [ 3.035863] libata version 3.00 loaded. [ 3.039854] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3.039858] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3.039964] xen: registering gsi 16 triggering 0 polarity 1 [ 3.039970] Already setup the GSI :16 [ 3.046218] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.046389] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.046391] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.046392] usb usb2: Product: EHCI Host Controller [ 3.046393] usb usb2: Manufacturer: Linux 3.13-1-amd64 ehci_hcd [ 3.046394] usb usb2: SerialNumber: 0000:00:1d.0 [ 3.046493] hub 2-0:1.0: USB hub found [ 3.046506] hub 2-0:1.0: 2 ports detected [ 3.046681] xen: registering gsi 19 triggering 0 polarity 1 [ 3.046691] xen: --> pirq=19 -> irq=19 (gsi=19) [ 3.046839] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.313321] e1000e 0000:00:19.0 eth0: registered PHC clock [ 3.313323] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:55:62:65 [ 3.313324] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.313357] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF [ 3.313381] ahci 0000:00:1f.2: version 3.0 [ 3.313414] xen: registering gsi 16 triggering 0 polarity 1 [ 3.313417] Already setup the GSI :16 [ 3.313467] xen: registering gsi 21 triggering 0 polarity 1 [ 3.313479] xen: --> pirq=21 -> irq=21 (gsi=21) [ 3.313614] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.313799] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 3.313802] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 3.331410] e1000 0000:04:00.0 eth1: (PCI:33MHz:32-bit) 00:0e:0c:7f:a5:ce [ 3.331412] e1000 0000:04:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 3.342238] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.350522] scsi0 : ahci [ 3.350603] scsi1 : ahci [ 3.350655] scsi2 : ahci [ 3.350704] scsi3 : ahci [ 3.350757] scsi4 : ahci [ 3.350806] scsi5 : ahci [ 3.350830] ata1: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540100 irq 95 [ 3.350832] ata2: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540180 irq 95 [ 3.350835] ata3: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540200 irq 95 [ 3.350837] ata4: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540280 irq 95 [ 3.350839] ata5: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540300 irq 95 [ 3.350841] ata6: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540380 irq 95 [ 3.431152] e1000e 0000:02:00.0 eth2: registered PHC clock [ 3.431154] e1000e 0000:02:00.0 eth2: (PCI Express:2.5GT/s:Width x1) 00:1e:67:55:62:64 [ 3.431156] e1000e 0000:02:00.0 eth2: Intel(R) PRO/1000 Network Connection [ 3.431240] e1000e 0000:02:00.0 eth2: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 3.474511] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.474515] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.474642] hub 1-1:1.0: USB hub found [ 3.474759] hub 1-1:1.0: 6 ports detected [ 3.586230] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.670216] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.670241] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.670271] ata5: SATA link down (SStatus 0 SControl 300) [ 3.670291] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.670307] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.670322] ata6: SATA link down (SStatus 0 SControl 300) [ 3.671628] ata3.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 3.671631] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.671641] ata4.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 3.671644] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.671968] ata1.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 3.671971] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.671978] ata2.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 3.671981] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.673092] ata3.00: configured for UDMA/133 [ 3.673103] ata4.00: configured for UDMA/133 [ 3.673703] ata2.00: configured for UDMA/133 [ 3.674114] ata1.00: configured for UDMA/133 [ 3.674240] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 3.674389] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 3.674523] scsi 2:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 3.674630] scsi 3:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 3.680171] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.680178] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.680208] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.680212] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.680248] sd 0:0:0:0: [sda] Write Protect is off [ 3.680249] sd 1:0:0:0: [sdb] Write Protect is off [ 3.680252] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.680253] sd 2:0:0:0: [sdc] Write Protect is off [ 3.680255] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.680258] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.680260] sd 3:0:0:0: [sdd] Write Protect is off [ 3.680263] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.680267] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.680283] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.680293] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.680298] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.690700] sdd: sdd1 sdd2 sdd3 [ 3.690991] sd 3:0:0:0: [sdd] Attached SCSI disk [ 3.694277] sdb: sdb1 sdb2 sdb3 [ 3.694457] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.694755] sdc: sdc1 sdc2 sdc3 [ 3.694971] sda: sda1 [ 3.695037] sd 2:0:0:0: [sdc] Attached SCSI disk [ 3.695165] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.697270] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.697317] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.697358] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.697397] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 3.718541] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.718546] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.718808] hub 2-1:1.0: USB hub found [ 3.718918] hub 2-1:1.0: 6 ports detected [ 3.768713] random: nonblocking pool is initialized [ 3.790310] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 3.883537] usb 1-1.1: New USB device found, idVendor=046b, idProduct=ff10 [ 3.883543] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.883545] usb 1-1.1: Product: Virtual Keyboard and Mouse [ 3.883548] usb 1-1.1: Manufacturer: American Megatrends Inc. [ 3.883550] usb 1-1.1: SerialNumber: serial [ 3.886896] hidraw: raw HID events driver (C) Jiri Kosina [ 3.887868] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.888609] usbcore: registered new interface driver usbhid [ 3.888611] usbhid: USB HID core driver [ 3.890687] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input0 [ 3.890733] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.1/input0 [ 3.890818] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input1 [ 3.890887] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.1/input1 [ 3.990289] usb 2-1.4: new low-speed USB device number 3 using ehci-pci [ 4.088028] usb 2-1.4: New USB device found, idVendor=413c, idProduct=2107 [ 4.088031] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.088034] usb 2-1.4: Product: Dell USB Entry Keyboard [ 4.088036] usb 2-1.4: Manufacturer: DELL [ 4.091238] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input2 [ 4.091277] hid-generic 0003:413C:2107.0003: input,hidraw2: USB HID v1.10 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:1d.0-1.4/input0 [ 4.686809] systemd-udevd[419]: starting version 204 [ 5.067152] systemd-udevd[460]: renamed network interface eth0 to rename2 [ 5.150839] systemd-udevd[482]: renamed network interface eth1 to eth0 [ 5.173739] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 5.182337] systemd-udevd[460]: renamed network interface rename2 to eth1 [ 5.203191] xen: registering gsi 22 triggering 0 polarity 1 [ 5.203197] Already setup the GSI :22 [ 5.203205] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251) [ 5.203209] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.212368] alg: No test for crc32 (crc32-pclmul) [ 5.217691] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 5.231805] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 [ 5.231846] ACPI: Sleep Button [SLPB] [ 5.231876] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 5.231911] ACPI: Power Button [PWRF] [ 5.244055] Warning: Processor Platform Limit not supported. [ 5.262724] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 5.262728] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.262732] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 5.262734] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.262735] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 5.262736] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.262737] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 5.262739] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SI_.SIOR 2 (20131115/utaddress-251) [ 5.262741] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.262741] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.281370] iTCO_vendor_support: vendor-support=0 [ 5.281775] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 5.281793] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 5.452945] intel_rapl: domain uncore energy ctr 0:0 not working, skip [ 5.971489] EXT4-fs (sda1): re-mounted. Opts: (null) [ 6.076036] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 6.301851] loop: module loaded [ 7.679888] xen:xen_evtchn: Event-channel device installed [ 7.723524] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.726583] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 7.726752] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [-- Attachment #3: xen4.3dmesg.txt --] [-- Type: text/plain, Size: 61478 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Debian 3.13.10-1 (2014-04-15) [ 0.000000] Command line: placeholder root=UUID=24e080dd-79b1-444c-8a7d-36e54ed2f4ca ro quiet [ 0.000000] Freeing 9b-100 pfn range: 101 pages freed [ 0.000000] 1-1 mapping on 9b->100 [ 0.000000] Freeing ab9a7-bba28 pfn range: 65665 pages freed [ 0.000000] 1-1 mapping on ab9a7->bba28 [ 0.000000] Freeing bc483-bc5b9 pfn range: 310 pages freed [ 0.000000] 1-1 mapping on bc483->bc5b9 [ 0.000000] Freeing beadd-beaee pfn range: 17 pages freed [ 0.000000] 1-1 mapping on beadd->beaee [ 0.000000] Freeing bed27-befff pfn range: 728 pages freed [ 0.000000] 1-1 mapping on bed27->befff [ 0.000000] Freeing bf000-100000 pfn range: 266240 pages freed [ 0.000000] 1-1 mapping on bf000->100000 [ 0.000000] Released 333061 pages of unused memory [ 0.000000] Set 333061 page(s) to 1-1 mapping [ 0.000000] Populating 1dfa0a-230f0f pfn range: 333061 pages added [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x00000000ab9a6fff] usable [ 0.000000] Xen: [mem 0x00000000ab9a7000-0x00000000bba27fff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bba28000-0x00000000bc482fff] usable [ 0.000000] Xen: [mem 0x00000000bc483000-0x00000000bc5b8fff] reserved [ 0.000000] Xen: [mem 0x00000000bc5b9000-0x00000000beadcfff] usable [ 0.000000] Xen: [mem 0x00000000beadd000-0x00000000beaedfff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000bed26fff] usable [ 0.000000] Xen: [mem 0x00000000bed27000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000befff000-0x00000000beffffff] usable [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x000000023fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation S1200BTL/S1200BTL, BIOS S1200BT.86B.02.00.0041.120520121743 12/05/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x230c00000-0x230dfffff] [ 0.000000] [mem 0x230c00000-0x230dfffff] page 4k [ 0.000000] BRK [0x01ab9000, 0x01ab9fff] PGTABLE [ 0.000000] BRK [0x01aba000, 0x01abafff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x230000000-0x230bfffff] [ 0.000000] [mem 0x230000000-0x230bfffff] page 4k [ 0.000000] BRK [0x01abb000, 0x01abbfff] PGTABLE [ 0.000000] BRK [0x01abc000, 0x01abcfff] PGTABLE [ 0.000000] BRK [0x01abd000, 0x01abdfff] PGTABLE [ 0.000000] BRK [0x01abe000, 0x01abefff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x200000000-0x22fffffff] [ 0.000000] [mem 0x200000000-0x22fffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x00100000-0xab9a6fff] [ 0.000000] [mem 0x00100000-0xab9a6fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbba28000-0xbc482fff] [ 0.000000] [mem 0xbba28000-0xbc482fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbc5b9000-0xbeadcfff] [ 0.000000] [mem 0xbc5b9000-0xbeadcfff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbeaee000-0xbed26fff] [ 0.000000] [mem 0xbeaee000-0xbed26fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbefff000-0xbeffffff] [ 0.000000] [mem 0xbefff000-0xbeffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x230e00000-0x23fffffff] [ 0.000000] [mem 0x230e00000-0x23fffffff] page 4k [ 0.000000] RAMDISK: [mem 0x01ebc000-0x044a3fff] [ 0.000000] ACPI: RSDP 00000000000f0410 000024 (v02 INTEL) [ 0.000000] ACPI: XSDT 00000000beffde18 0000B4 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: FACP 00000000beffcd98 0000F4 (v04 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: DSDT 00000000befee018 00CE48 (v02 INTEL S1200BTL 00000000 INTL 20100331) [ 0.000000] ACPI: FACS 00000000beffdd40 000040 [ 0.000000] ACPI: APIC 00000000beffb018 000652 (v03 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: SPMI 00000000beffec98 000040 (v05 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: MCFG 00000000beffec18 00003C (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: WDDT 00000000beffef18 000040 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: HPET 00000000beffee98 000038 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: SSDT 00000000befeb018 0010A8 (v02 INTEL S1200BTL 00001000 INTL 20100331) [ 0.000000] ACPI: BOOT 00000000beffee18 000028 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: SSDT 00000000befe7698 0005E0 (v02 INTEL S1200BTL 00003000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000befe6018 000A92 (v02 INTEL S1200BTL 00003000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000befea598 00054D (v01 INTEL S1200BTL 00001000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000beffdb18 000069 (v01 INTEL S1200BTL 00001000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000befe9e18 00017B (v02 INTEL S1200BTL 00002000 INTL 20100331) [ 0.000000] ACPI: XMAR 00000000befe8f18 000078 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: HEST 00000000beffcf18 0000A8 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 00000000beffed98 000030 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 00000000befe8c98 000230 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 00000000beffc918 000130 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff] [ 0.000000] NODE_DATA [mem 0x230f0a000-0x230f0efff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x23fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009afff] [ 0.000000] node 0: [mem 0x00100000-0xab9a6fff] [ 0.000000] node 0: [mem 0xbba28000-0xbc482fff] [ 0.000000] node 0: [mem 0xbc5b9000-0xbeadcfff] [ 0.000000] node 0: [mem 0xbeaee000-0xbed26fff] [ 0.000000] node 0: [mem 0xbefff000-0xbeffffff] [ 0.000000] node 0: [mem 0x100000000-0x23fffffff] [ 0.000000] On node 0 totalpages: 2026234 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3994 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9728 pages used for memmap [ 0.000000] DMA32 zone: 711520 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: X2APIC (apic_id[0x00] uid[0x00] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x01] uid[0x01] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x02] uid[0x02] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x03] uid[0x03] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x04] uid[0x04] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x05] uid[0x05] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x06] uid[0x06] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x07] uid[0x07] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x08] uid[0x08] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x09] uid[0x09] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0a] uid[0x0a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0b] uid[0x0b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0c] uid[0x0c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0d] uid[0x0d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0e] uid[0x0e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0f] uid[0x0f] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x10] uid[0x10] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x11] uid[0x11] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x12] uid[0x12] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x13] uid[0x13] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x14] uid[0x14] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x15] uid[0x15] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x16] uid[0x16] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x17] uid[0x17] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x18] uid[0x18] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x19] uid[0x19] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1a] uid[0x1a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1b] uid[0x1b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1c] uid[0x1c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1d] uid[0x1d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1e] uid[0x1e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1f] uid[0x1f] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x20] uid[0x20] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x21] uid[0x21] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x22] uid[0x22] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x23] uid[0x23] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x24] uid[0x24] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x25] uid[0x25] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x26] uid[0x26] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x27] uid[0x27] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x28] uid[0x28] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x29] uid[0x29] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2a] uid[0x2a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2b] uid[0x2b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2c] uid[0x2c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2d] uid[0x2d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2e] uid[0x2e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2f] uid[0x2f] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x30] uid[0x30] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x31] uid[0x31] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x32] uid[0x32] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x33] uid[0x33] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x34] uid[0x34] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x35] uid[0x35] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x36] uid[0x36] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x37] uid[0x37] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x38] uid[0x38] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x39] uid[0x39] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3a] uid[0x3a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3b] uid[0x3b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3c] uid[0x3c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3d] uid[0x3d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3e] uid[0x3e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3f] uid[0x3f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x21] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x22] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x23] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x24] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x25] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x26] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x27] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x28] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x29] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x30] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x31] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x32] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x33] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x34] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x35] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x36] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x37] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x38] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x39] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 128 CPUs, 120 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xab9a7000-0xbba27fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc483000-0xbc5b8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbeadd000-0xbeaedfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbed27000-0xbeddffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbede0000-0xbefdffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbefe0000-0xbeffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed18fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed19000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.3.0 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:128 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880226800000 s85824 r8192 d20672 u131072 [ 0.000000] pcpu-alloc: s85824 r8192 d20672 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 000 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 [ 0.000000] pcpu-alloc: [0] 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 [ 0.000000] pcpu-alloc: [0] 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 [ 0.000000] pcpu-alloc: [0] 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 [ 0.000000] pcpu-alloc: [0] 064 065 066 067 068 069 070 071 072 073 074 075 076 077 078 079 [ 0.000000] pcpu-alloc: [0] 080 081 082 083 084 085 086 087 088 089 090 091 092 093 094 095 [ 0.000000] pcpu-alloc: [0] 096 097 098 099 100 101 102 103 104 105 106 107 108 109 110 111 [ 0.000000] pcpu-alloc: [0] 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 [ 2.387970] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1998509 [ 2.387972] Policy zone: Normal [ 2.387973] Kernel command line: placeholder root=UUID=24e080dd-79b1-444c-8a7d-36e54ed2f4ca ro quiet [ 2.388147] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 2.388181] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 2.417298] software IO TLB [mem 0x222800000-0x226800000] (64MB) mapped at [ffff880222800000-ffff8802267fffff] [ 2.446796] Memory: 7583304K/8104936K available (4811K kernel code, 693K rwdata, 1620K rodata, 984K init, 952K bss, 521632K reserved) [ 2.446849] Hierarchical RCU implementation. [ 2.446850] RCU dyntick-idle grace-period acceleration is enabled. [ 2.446851] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 2.446856] NR_IRQS:33024 nr_irqs:744 16 [ 2.446908] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 2.446909] xen: registering gsi 9 triggering 0 polarity 0 [ 2.446920] xen: --> pirq=9 -> irq=9 (gsi=9) [ 2.446939] xen: acpi sci 9 [ 2.446942] xen: --> pirq=1 -> irq=1 (gsi=1) [ 2.446943] xen: --> pirq=2 -> irq=2 (gsi=2) [ 2.446947] xen: --> pirq=3 -> irq=3 (gsi=3) [ 2.446948] xen: --> pirq=4 -> irq=4 (gsi=4) [ 2.446950] xen: --> pirq=5 -> irq=5 (gsi=5) [ 2.446951] xen: --> pirq=6 -> irq=6 (gsi=6) [ 2.446953] xen: --> pirq=7 -> irq=7 (gsi=7) [ 2.446955] xen: --> pirq=8 -> irq=8 (gsi=8) [ 2.446956] xen: --> pirq=10 -> irq=10 (gsi=10) [ 2.446958] xen: --> pirq=11 -> irq=11 (gsi=11) [ 2.446959] xen: --> pirq=12 -> irq=12 (gsi=12) [ 2.446961] xen: --> pirq=13 -> irq=13 (gsi=13) [ 2.446963] xen: --> pirq=14 -> irq=14 (gsi=14) [ 2.446964] xen: --> pirq=15 -> irq=15 (gsi=15) [ 2.455521] Console: colour VGA+ 80x25 [ 2.455603] console [tty0] enabled [ 2.455626] Xen: using vcpuop timer interface [ 2.455629] installing Xen timer for CPU 0 [ 2.455646] tsc: Detected 3292.640 MHz processor [ 2.455650] Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.28 BogoMIPS (lpj=13170560) [ 2.455652] pid_max: default: 32768 minimum: 301 [ 2.455669] Security Framework initialized [ 2.455673] AppArmor: AppArmor disabled by boot time parameter [ 2.455673] Yama: disabled by default; enable with sysctl kernel.yama.* [ 2.456461] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 2.458548] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 2.459410] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 2.459423] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 2.459603] Initializing cgroup subsys memory [ 2.459607] Initializing cgroup subsys devices [ 2.459609] Initializing cgroup subsys freezer [ 2.459610] Initializing cgroup subsys blkio [ 2.459611] Initializing cgroup subsys perf_event [ 2.459654] CPU: Physical Processor ID: 0 [ 2.459655] CPU: Processor Core ID: 0 [ 2.459943] mce: CPU supports 2 MCE banks [ 2.459956] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 2.459956] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 2.459956] tlb_flushall_shift: 2 [ 2.460027] Freeing SMP alternatives memory: 20K (ffffffff819a5000 - ffffffff819aa000) [ 2.460847] ACPI: Core revision 20131115 [ 2.465121] ACPI: All ACPI Tables successfully acquired [ 2.467464] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 2.467639] NMI watchdog: disabled (cpu0): hardware events not enabled [ 2.467697] installing Xen timer for CPU 1 [ 2.468229] installing Xen timer for CPU 2 [ 2.468754] installing Xen timer for CPU 3 [ 2.469263] installing Xen timer for CPU 4 [ 2.469769] installing Xen timer for CPU 5 [ 2.470238] installing Xen timer for CPU 6 [ 2.470711] installing Xen timer for CPU 7 [ 2.471097] x86: Booted up 1 node, 8 CPUs [ 2.471300] devtmpfs: initialized [ 2.473332] PM: Registering ACPI NVS region [mem 0xab9a7000-0xbba27fff] (268963840 bytes) [ 2.476724] PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 2.476882] xen:grant_table: Grant tables using version 2 layout [ 2.476891] Grant table initialized [ 2.476946] NET: Registered protocol family 16 [ 2.477079] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 2.477081] ACPI: bus type PCI registered [ 2.477082] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 2.477233] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 2.477235] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 2.485479] PCI: Using configuration type 1 for base access [ 2.486081] bio: create slab <bio-0> at 0 [ 2.486285] ACPI: Added _OSI(Module Device) [ 2.486287] ACPI: Added _OSI(Processor Device) [ 2.486288] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.486289] ACPI: Added _OSI(Processor Aggregator Device) [ 2.488345] ACPI: Executed 1 blocks of module-level executable AML code [ 2.512548] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 2.513172] ACPI: SSDT 00000000bedbb018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 2.513415] ACPI: Dynamic OEM Table Load: [ 2.513417] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 2.524888] ACPI: SSDT 00000000bedbca98 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 2.525150] ACPI: Dynamic OEM Table Load: [ 2.525152] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 2.536998] ACPI: SSDT 00000000bedbad98 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 2.537238] ACPI: Dynamic OEM Table Load: [ 2.537239] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 2.549958] ACPI: Interpreter enabled [ 2.549967] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 2.549973] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580) [ 2.549977] ACPI: (supports S0 S1 S3 S5) [ 2.549978] ACPI: Using IOAPIC for interrupt routing [ 2.550015] HEST: Table parsing has been initialized. [ 2.550017] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.550199] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 2.554365] ACPI: Power Resource [FN00] (off) [ 2.554417] ACPI: Power Resource [FN01] (off) [ 2.554470] ACPI: Power Resource [FN02] (off) [ 2.554525] ACPI: Power Resource [FN03] (off) [ 2.554574] ACPI: Power Resource [FN04] (off) [ 2.554976] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 2.554980] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 2.555267] acpi PNP0A08:00: _OSC: platform does not support [AER] [ 2.555585] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 2.556069] PCI host bridge to bus 0000:00 [ 2.556071] pci_bus 0000:00: root bus resource [bus 00-3e] [ 2.556072] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 2.556073] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 2.556074] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 2.556076] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff] [ 2.556077] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 2.556078] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 2.556079] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 2.556080] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 2.556081] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 2.556082] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 2.556083] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff] [ 2.556084] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 2.556095] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 [ 2.556285] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 2.556326] pci 0000:00:19.0: reg 0x10: [mem 0xc2500000-0xc251ffff] [ 2.556344] pci 0000:00:19.0: reg 0x14: [mem 0xc2570000-0xc2570fff] [ 2.556361] pci 0000:00:19.0: reg 0x18: [io 0x5040-0x505f] [ 2.556512] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 2.556560] pci 0000:00:19.0: System wakeup disabled by ACPI [ 2.556610] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 2.556651] pci 0000:00:1a.0: reg 0x10: [mem 0xc2560000-0xc25603ff] [ 2.556836] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.556895] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 2.556940] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 2.557112] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.557166] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 2.557221] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 2.557393] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 2.557446] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 2.557488] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400 [ 2.557656] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 2.557709] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 2.557761] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 2.557801] pci 0000:00:1d.0: reg 0x10: [mem 0xc2550000-0xc25503ff] [ 2.557986] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.558044] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 2.558084] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.558236] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 2.558274] pci 0000:00:1f.0: [8086:1c54] type 00 class 0x060100 [ 2.558540] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 2.558585] pci 0000:00:1f.2: reg 0x10: [io 0x5090-0x5097] [ 2.558602] pci 0000:00:1f.2: reg 0x14: [io 0x5080-0x5083] [ 2.558620] pci 0000:00:1f.2: reg 0x18: [io 0x5070-0x5077] [ 2.558637] pci 0000:00:1f.2: reg 0x1c: [io 0x5060-0x5063] [ 2.558655] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f] [ 2.558671] pci 0000:00:1f.2: reg 0x24: [mem 0xc2540000-0xc25407ff] [ 2.558788] pci 0000:00:1f.2: PME# supported from D3hot [ 2.558868] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 2.558903] pci 0000:00:1f.3: reg 0x10: [mem 0xc2530000-0xc25300ff 64bit] [ 2.558949] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f] [ 2.559150] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 2.559156] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 2.559162] pci 0000:00:1c.0: bridge window [mem 0xc1900000-0xc22fffff] [ 2.559172] pci 0000:00:1c.0: bridge window [mem 0xc2600000-0xc2ffffff 64bit pref] [ 2.559335] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 [ 2.559379] pci 0000:02:00.0: reg 0x10: [mem 0xc2400000-0xc241ffff] [ 2.559439] pci 0000:02:00.0: reg 0x18: [io 0x3000-0x301f] [ 2.559470] pci 0000:02:00.0: reg 0x1c: [mem 0xc2420000-0xc2423fff] [ 2.559732] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 2.559803] pci 0000:02:00.0: System wakeup disabled by ACPI [ 2.565403] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 2.565410] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 2.565416] pci 0000:00:1c.4: bridge window [mem 0xc2400000-0xc24fffff] [ 2.565575] pci 0000:03:00.0: [102b:0522] type 00 class 0x030000 [ 2.565608] pci 0000:03:00.0: reg 0x10: [mem 0xc0000000-0xc0ffffff] [ 2.565633] pci 0000:03:00.0: reg 0x14: [mem 0xc1810000-0xc1813fff] [ 2.565656] pci 0000:03:00.0: reg 0x18: [mem 0xc1000000-0xc17fffff] [ 2.565747] pci 0000:03:00.0: reg 0x30: [mem 0xc1800000-0xc180ffff pref] [ 2.565902] pci 0000:03:00.0: System wakeup disabled by ACPI [ 2.573535] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 2.573544] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc18fffff] [ 2.573637] pci 0000:04:00.0: [8086:100e] type 00 class 0x020000 [ 2.573674] pci 0000:04:00.0: reg 0x10: [mem 0xc2340000-0xc235ffff] [ 2.573691] pci 0000:04:00.0: reg 0x14: [mem 0xc2320000-0xc233ffff] [ 2.573708] pci 0000:04:00.0: reg 0x18: [io 0x2000-0x203f] [ 2.573775] pci 0000:04:00.0: reg 0x30: [mem 0xc2300000-0xc231ffff pref] [ 2.573862] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 2.573987] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 2.573993] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] [ 2.573999] pci 0000:00:1e.0: bridge window [mem 0xc2300000-0xc23fffff] [ 2.574010] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 2.574011] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 2.574012] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 2.574013] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode) [ 2.574015] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 2.574016] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 2.574017] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 2.574018] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 2.574019] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 2.574020] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 2.574022] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode) [ 2.574023] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) [ 2.574075] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 2.574464] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.574505] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.574543] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.574582] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.574620] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.574658] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10 11 12 14 15) [ 2.574697] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 2.574735] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.574961] ACPI: Enabled 7 GPEs in block 00 to 3F [ 2.574966] ACPI: \_SB_.PCI0: notify handler is installed [ 2.575000] Found 1 acpi root devices [ 2.575027] xen:balloon: Initialising balloon driver [ 2.575779] xen_balloon: Initialising balloon driver [ 2.575898] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 2.575900] vgaarb: loaded [ 2.575901] vgaarb: bridge control possible 0000:03:00.0 [ 2.575930] PCI: Using ACPI for IRQ routing [ 2.580204] PCI: pci_cache_line_size set to 64 bytes [ 2.580281] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 2.580282] e820: reserve RAM buffer [mem 0xab9a7000-0xabffffff] [ 2.580283] e820: reserve RAM buffer [mem 0xbc483000-0xbfffffff] [ 2.580285] e820: reserve RAM buffer [mem 0xbeadd000-0xbfffffff] [ 2.580286] e820: reserve RAM buffer [mem 0xbed27000-0xbfffffff] [ 2.580286] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff] [ 2.580406] Switched to clocksource xen [ 2.581507] pnp: PnP ACPI init [ 2.581513] ACPI: bus type PNP registered [ 2.581545] pnp 00:00: [dma 4] [ 2.581557] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 2.581570] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 2.581642] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 2.581648] xen: registering gsi 13 triggering 1 polarity 0 [ 2.581675] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 2.581702] system 00:04: [io 0x0680-0x069f] has been reserved [ 2.581704] system 00:04: [io 0xffff] has been reserved [ 2.581705] system 00:04: [io 0xffff] has been reserved [ 2.581706] system 00:04: [io 0xffff] has been reserved [ 2.581707] system 00:04: [io 0x0400-0x0453] could not be reserved [ 2.581709] system 00:04: [io 0x0458-0x047f] has been reserved [ 2.581710] system 00:04: [io 0x0500-0x057f] has been reserved [ 2.581712] system 00:04: [io 0x164e-0x164f] has been reserved [ 2.581713] system 00:04: [io 0x0900-0x090f] has been reserved [ 2.581714] system 00:04: [io 0x0295-0x0296] has been reserved [ 2.581716] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.581721] xen: registering gsi 8 triggering 1 polarity 0 [ 2.581745] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.581773] system 00:06: [io 0x0454-0x0457] has been reserved [ 2.581775] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 2.581931] xen: registering gsi 4 triggering 1 polarity 0 [ 2.581948] pnp 00:07: [dma 0 disabled] [ 2.581980] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.582109] xen: registering gsi 3 triggering 1 polarity 0 [ 2.582125] pnp 00:08: [dma 0 disabled] [ 2.582156] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.582286] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.582288] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 2.582289] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.582291] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.582292] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 2.582293] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.582295] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 2.582296] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 2.582297] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 2.582299] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 2.582300] system 00:09: [mem 0xc2590000-0xc2590fff] has been reserved [ 2.582301] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.582468] system 00:0a: [mem 0x00000000-0x0009cfff] could not be reserved [ 2.582470] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.582503] pnp: PnP ACPI: found 11 devices [ 2.582504] ACPI: bus type PNP unregistered [ 2.587334] PM-Timer failed consistency check (0xffffff) - aborting. [ 2.587399] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 2.587403] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 2.587411] pci 0000:00:1c.0: bridge window [mem 0xc1900000-0xc22fffff] [ 2.587416] pci 0000:00:1c.0: bridge window [mem 0xc2600000-0xc2ffffff 64bit pref] [ 2.587426] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 2.587429] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 2.587438] pci 0000:00:1c.4: bridge window [mem 0xc2400000-0xc24fffff] [ 2.587452] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 2.587460] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc18fffff] [ 2.587475] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 2.587479] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] [ 2.587487] pci 0000:00:1e.0: bridge window [mem 0xc2300000-0xc23fffff] [ 2.587502] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.587503] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.587505] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.587506] pci_bus 0000:00: resource 7 [mem 0x000cc000-0x000cffff] [ 2.587507] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000d3fff] [ 2.587508] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff] [ 2.587509] pci_bus 0000:00: resource 10 [mem 0x000d8000-0x000dbfff] [ 2.587510] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000dffff] [ 2.587511] pci_bus 0000:00: resource 12 [mem 0x000e0000-0x000e3fff] [ 2.587512] pci_bus 0000:00: resource 13 [mem 0x000e4000-0x000e7fff] [ 2.587513] pci_bus 0000:00: resource 14 [mem 0xc0000000-0xfeafffff] [ 2.587514] pci_bus 0000:00: resource 15 [mem 0xfed40000-0xfed44fff] [ 2.587516] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 2.587517] pci_bus 0000:01: resource 1 [mem 0xc1900000-0xc22fffff] [ 2.587518] pci_bus 0000:01: resource 2 [mem 0xc2600000-0xc2ffffff 64bit pref] [ 2.587519] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 2.587520] pci_bus 0000:02: resource 1 [mem 0xc2400000-0xc24fffff] [ 2.587521] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc18fffff] [ 2.587522] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 2.587524] pci_bus 0000:04: resource 1 [mem 0xc2300000-0xc23fffff] [ 2.587525] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 2.587526] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 2.587527] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 2.587528] pci_bus 0000:04: resource 7 [mem 0x000cc000-0x000cffff] [ 2.587529] pci_bus 0000:04: resource 8 [mem 0x000d0000-0x000d3fff] [ 2.587530] pci_bus 0000:04: resource 9 [mem 0x000d4000-0x000d7fff] [ 2.587531] pci_bus 0000:04: resource 10 [mem 0x000d8000-0x000dbfff] [ 2.587532] pci_bus 0000:04: resource 11 [mem 0x000dc000-0x000dffff] [ 2.587533] pci_bus 0000:04: resource 12 [mem 0x000e0000-0x000e3fff] [ 2.587535] pci_bus 0000:04: resource 13 [mem 0x000e4000-0x000e7fff] [ 2.587536] pci_bus 0000:04: resource 14 [mem 0xc0000000-0xfeafffff] [ 2.587537] pci_bus 0000:04: resource 15 [mem 0xfed40000-0xfed44fff] [ 2.587680] NET: Registered protocol family 2 [ 2.587900] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 2.588111] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.588317] TCP: Hash tables configured (established 65536 bind 65536) [ 2.588337] TCP: reno registered [ 2.588353] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 2.588392] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 2.588497] NET: Registered protocol family 1 [ 2.588557] xen: registering gsi 22 triggering 0 polarity 1 [ 2.588565] xen: --> pirq=22 -> irq=22 (gsi=22) [ 2.604602] xen: registering gsi 20 triggering 0 polarity 1 [ 2.604608] xen: --> pirq=20 -> irq=20 (gsi=20) [ 2.622570] pci 0000:03:00.0: Boot video device [ 2.622577] PCI: CLS 64 bytes, default 64 [ 2.622608] Unpacking initramfs... [ 2.651225] Freeing initrd memory: 38816K (ffff880001ebc000 - ffff8800044a4000) [ 2.651357] Simple Boot Flag at 0x4f set to 0x1 [ 2.651919] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 2.652182] audit: initializing netlink socket (disabled) [ 2.652192] type=2000 audit(1400255284.643:1): initialized [ 2.661830] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.662150] VFS: Disk quotas dquot_6.5.2 [ 2.662174] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.662235] msgmni has been set to 14886 [ 2.662487] alg: No test for stdrng (krng) [ 2.662512] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.662550] io scheduler noop registered [ 2.662551] io scheduler deadline registered [ 2.662574] io scheduler cfq registered (default) [ 2.662691] xen: registering gsi 16 triggering 0 polarity 1 [ 2.662703] xen: --> pirq=16 -> irq=16 (gsi=16) [ 2.662932] xen: registering gsi 16 triggering 0 polarity 1 [ 2.662934] Already setup the GSI :16 [ 2.663118] xen: registering gsi 16 triggering 0 polarity 1 [ 2.663119] Already setup the GSI :16 [ 2.663304] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 2.663311] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 2.663336] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 2.663338] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 2.663344] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 2.663368] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 2.663370] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 2.663375] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 2.663383] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.663415] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 1c10 ss_vid 8086 ss_did 7270 [ 2.663453] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded [ 2.663457] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.663477] intel_idle: MWAIT substates: 0x1120 [ 2.663477] intel_idle: v0.4 model 0x3A [ 2.663478] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.663512] intel_idle: intel_idle yielding to none [ 2.663559] ERST: Error Record Serialization Table (ERST) support is initialized. [ 2.663564] pstore: Registered erst as persistent store backend [ 2.663702] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 2.664005] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.684866] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.705696] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.705925] hpet_acpi_add: no address or irqs in _CRS [ 2.705938] Linux agpgart interface v0.103 [ 2.705997] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 3.222666] i8042: Can't read CTR while initializing i8042 [ 3.222748] i8042: probe of i8042 failed with error -5 [ 3.222877] mousedev: PS/2 mouse device common for all mice [ 3.222920] rtc_cmos 00:05: RTC can wake from S4 [ 3.223094] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 3.223148] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram [ 3.223157] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> [ 3.223158] AMD IOMMUv2 functionality not available on this system [ 3.223257] TCP: cubic registered [ 3.223398] NET: Registered protocol family 10 [ 3.223544] mip6: Mobile IPv6 [ 3.223546] NET: Registered protocol family 17 [ 3.223548] mpls_gso: MPLS GSO support [ 3.223738] registered taskstats version 1 [ 3.224234] rtc_cmos 00:05: setting system clock to 2014-05-16 15:48:04 UTC (1400255284) [ 3.224262] PM: Hibernation image not present or could not be loaded. [ 3.224560] Freeing unused kernel memory: 984K (ffffffff818af000 - ffffffff819a5000) [ 3.224561] Write protecting the kernel read-only data: 8192k [ 3.226462] Freeing unused kernel memory: 1324K (ffff8800014b5000 - ffff880001600000) [ 3.226614] Freeing unused kernel memory: 428K (ffff880001795000 - ffff880001800000) [ 3.241533] systemd-udevd[90]: starting version 204 [ 3.259354] pps_core: LinuxPPS API ver. 1 registered [ 3.259359] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 3.259876] PTP clock support registered [ 3.261003] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 3.261005] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 3.261115] xen: registering gsi 19 triggering 0 polarity 1 [ 3.261132] xen: --> pirq=19 -> irq=19 (gsi=19) [ 3.261317] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.266508] ACPI: bus type USB registered [ 3.266543] usbcore: registered new interface driver usbfs [ 3.266555] usbcore: registered new interface driver hub [ 3.266592] usbcore: registered new device driver usb [ 3.267046] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.267355] ehci-pci: EHCI PCI platform driver [ 3.273512] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.273515] ACPI: Thermal Zone [TZ00] (28 C) [ 3.273559] ACPI: Fan [FAN0] (off) [ 3.273794] thermal LNXTHERM:01: registered as thermal_zone1 [ 3.273796] ACPI: Thermal Zone [TZ01] (30 C) [ 3.273841] ACPI: Fan [FAN1] (off) [ 3.273868] ACPI: Fan [FAN2] (off) [ 3.273889] ACPI: Fan [FAN3] (off) [ 3.273911] ACPI: Fan [FAN4] (off) [ 3.279377] SCSI subsystem initialized [ 3.282414] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3.282417] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3.282564] xen: registering gsi 16 triggering 0 polarity 1 [ 3.282572] Already setup the GSI :16 [ 3.282758] libata version 3.00 loaded. [ 3.523740] e1000e 0000:00:19.0 eth0: registered PHC clock [ 3.523743] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:55:62:65 [ 3.523744] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.523778] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF [ 3.523846] xen: registering gsi 16 triggering 0 polarity 1 [ 3.523849] Already setup the GSI :16 [ 3.523888] xen: registering gsi 22 triggering 0 polarity 1 [ 3.523891] Already setup the GSI :22 [ 3.523941] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.523945] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.523991] ehci-pci 0000:00:1a.0: debug port 2 [ 3.524056] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.527930] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 3.527972] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc2560000 [ 3.536473] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.536501] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.536502] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.536503] usb usb1: Product: EHCI Host Controller [ 3.536504] usb usb1: Manufacturer: Linux 3.13-1-amd64 ehci_hcd [ 3.536505] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.536629] hub 1-0:1.0: USB hub found [ 3.536636] hub 1-0:1.0: 2 ports detected [ 3.536739] xen: registering gsi 20 triggering 0 polarity 1 [ 3.536741] Already setup the GSI :20 [ 3.536767] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.536770] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.536788] ehci-pci 0000:00:1d.0: debug port 2 [ 3.541789] ehci-pci 0000:00:1d.0: can't setup: -110 [ 3.541868] ehci-pci 0000:00:1d.0: USB bus 2 deregistered [ 3.541912] ehci-pci 0000:00:1d.0: init 0000:00:1d.0 fail, -110 [ 3.541993] ehci-pci: probe of 0000:00:1d.0 failed with error -110 [ 3.542060] ahci 0000:00:1f.2: version 3.0 [ 3.542119] xen: registering gsi 21 triggering 0 polarity 1 [ 3.542128] xen: --> pirq=21 -> irq=21 (gsi=21) [ 3.556583] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 3.556586] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 3.573760] e1000 0000:04:00.0 eth1: (PCI:33MHz:32-bit) 00:0e:0c:7f:a5:ce [ 3.573763] e1000 0000:04:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 3.596895] scsi0 : ahci [ 3.597101] scsi1 : ahci [ 3.597169] scsi2 : ahci [ 3.597224] scsi3 : ahci [ 3.597275] scsi4 : ahci [ 3.597328] scsi5 : ahci [ 3.597358] ata1: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540100 irq 98 [ 3.597361] ata2: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540180 irq 98 [ 3.597363] ata3: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540200 irq 98 [ 3.597365] ata4: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540280 irq 98 [ 3.597368] ata5: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540300 irq 98 [ 3.597370] ata6: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540380 irq 98 [ 3.641478] e1000e 0000:02:00.0 eth2: registered PHC clock [ 3.641480] e1000e 0000:02:00.0 eth2: (PCI Express:2.5GT/s:Width x1) 00:1e:67:55:62:64 [ 3.641482] e1000e 0000:02:00.0 eth2: Intel(R) PRO/1000 Network Connection [ 3.641566] e1000e 0000:02:00.0 eth2: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 3.848549] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.916501] ata6: SATA link down (SStatus 0 SControl 300) [ 3.916530] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.916569] ata5: SATA link down (SStatus 0 SControl 300) [ 3.916590] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.918225] ata3.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 3.918229] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.918759] ata4.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 3.918764] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.919741] ata3.00: configured for UDMA/133 [ 3.920217] ata4.00: configured for UDMA/133 [ 3.924485] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.924507] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.926280] ata1.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 3.926285] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.926317] ata2.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 3.926320] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.928731] ata1.00: configured for UDMA/133 [ 3.928932] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 3.928969] ata2.00: configured for UDMA/133 [ 3.929197] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 3.929451] scsi 2:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 3.929603] scsi 3:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 3.935079] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.935083] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.935094] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.935114] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.935129] sd 2:0:0:0: [sdc] Write Protect is off [ 3.935131] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.935146] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.935173] sd 0:0:0:0: [sda] Write Protect is off [ 3.935176] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.935177] sd 1:0:0:0: [sdb] Write Protect is off [ 3.935181] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.935202] sd 3:0:0:0: [sdd] Write Protect is off [ 3.935204] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.935207] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.935214] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.935233] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.944593] sdb: sdb1 sdb2 sdb3 [ 3.944865] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.946584] sdc: sdc1 sdc2 sdc3 [ 3.946592] sda: sda1 [ 3.946796] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.946803] sd 2:0:0:0: [sdc] Attached SCSI disk [ 3.950607] sdd: sdd1 sdd2 sdd3 [ 3.950871] sd 3:0:0:0: [sdd] Attached SCSI disk [ 3.952910] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.952949] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.952983] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.953016] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 3.980826] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.980830] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.981090] hub 1-1:1.0: USB hub found [ 3.981197] hub 1-1:1.0: 6 ports detected [ 4.019346] random: nonblocking pool is initialized [ 4.156207] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.252731] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 4.345817] usb 1-1.1: New USB device found, idVendor=046b, idProduct=ff10 [ 4.345822] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.345824] usb 1-1.1: Product: Virtual Keyboard and Mouse [ 4.345826] usb 1-1.1: Manufacturer: American Megatrends Inc. [ 4.345828] usb 1-1.1: SerialNumber: serial [ 4.946709] systemd-udevd[413]: starting version 204 [ 5.216566] systemd-udevd[504]: renamed network interface eth1 to rename3 [ 5.233452] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 5.233459] ACPI: Sleep Button [SLPB] [ 5.233505] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 5.233507] ACPI: Power Button [PWRF] [ 5.236913] systemd-udevd[454]: renamed network interface eth0 to eth1 [ 5.304587] systemd-udevd[504]: renamed network interface rename3 to eth0 [ 5.400185] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 5.434465] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 5.434470] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.434474] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 5.434476] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.434476] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 5.434478] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.434479] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 5.434481] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SI_.SIOR 2 (20131115/utaddress-251) [ 5.434482] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.434483] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.435758] alg: No test for crc32 (crc32-pclmul) [ 5.477737] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 5.487980] xen: registering gsi 22 triggering 0 polarity 1 [ 5.487984] Already setup the GSI :22 [ 5.487991] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251) [ 5.487994] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.501828] hidraw: raw HID events driver (C) Jiri Kosina [ 5.508684] Monitor-Mwait will be used to enter C-1 state [ 5.508699] Monitor-Mwait will be used to enter C-2 state [ 5.508711] Monitor-Mwait will be used to enter C-3 state [ 5.510237] Warning: Processor Platform Limit not supported. [ 5.545652] usbcore: registered new interface driver usbhid [ 5.545654] usbhid: USB HID core driver [ 5.568533] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input3 [ 5.568610] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.1/input0 [ 5.568711] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input4 [ 5.568790] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.1/input1 [ 5.574665] iTCO_vendor_support: vendor-support=0 [ 5.602280] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 5.602315] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 5.771848] intel_rapl: domain uncore energy ctr 0:0 not working, skip [ 6.206501] EXT4-fs (sda1): re-mounted. Opts: (null) [ 6.319383] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 6.546424] loop: module loaded [ 7.882578] xen:xen_evtchn: Event-channel device installed [ 8.167242] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.168881] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 8.169052] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [-- Attachment #4: xen4.3xldmesg.txt --] [-- Type: text/plain, Size: 16905 bytes --] (XEN) Xen version 4.3.0 (Debian 4.3.0-3+b1) (buildd-binet@buildd.debian.org) (gcc (Debian 4.8.2-8) 4.8.2) debug=n Wed Dec 4 07:43:54 UTC 2013 (XEN) Bootloader: GRUB 2.00-22 (XEN) Command line: placeholder loglvl=all (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 4 MBR signatures (XEN) Found 4 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009bc00 (usable) (XEN) 000000000009bc00 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000ab9a7000 (usable) (XEN) 00000000ab9a7000 - 00000000bba28000 (ACPI NVS) (XEN) 00000000bba28000 - 00000000bc483000 (usable) (XEN) 00000000bc483000 - 00000000bc5b9000 (reserved) (XEN) 00000000bc5b9000 - 00000000beadd000 (usable) (XEN) 00000000beadd000 - 00000000beaee000 (reserved) (XEN) 00000000beaee000 - 00000000bed27000 (usable) (XEN) 00000000bed27000 - 00000000bede0000 (reserved) (XEN) 00000000bede0000 - 00000000befe0000 (ACPI NVS) (XEN) 00000000befe0000 - 00000000befff000 (ACPI data) (XEN) 00000000befff000 - 00000000bf000000 (usable) (XEN) 00000000bf000000 - 00000000c0000000 (reserved) (XEN) 00000000f8000000 - 00000000fc000000 (reserved) (XEN) 00000000fec00000 - 00000000fec01000 (reserved) (XEN) 00000000fed19000 - 00000000fed1a000 (reserved) (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffa00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000240000000 (usable) (XEN) ACPI: RSDP 000F0410, 0024 (r2 INTEL) (XEN) ACPI: XSDT BEFFDE18, 00B4 (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: FACP BEFFCD98, 00F4 (r4 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: DSDT BEFEE018, CE48 (r2 INTEL S1200BTL 0 INTL 20100331) (XEN) ACPI: FACS BEFFDD40, 0040 (XEN) ACPI: APIC BEFFB018, 0652 (r3 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: SPMI BEFFEC98, 0040 (r5 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: MCFG BEFFEC18, 003C (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: WDDT BEFFEF18, 0040 (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: HPET BEFFEE98, 0038 (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: SSDT BEFEB018, 10A8 (r2 INTEL S1200BTL 1000 INTL 20100331) (XEN) ACPI: BOOT BEFFEE18, 0028 (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: SSDT BEFE7698, 05E0 (r2 INTEL S1200BTL 3000 INTL 20100331) (XEN) ACPI: SSDT BEFE6018, 0A92 (r2 INTEL S1200BTL 3000 INTL 20100331) (XEN) ACPI: SSDT BEFEA598, 054D (r1 INTEL S1200BTL 1000 INTL 20100331) (XEN) ACPI: SSDT BEFFDB18, 0069 (r1 INTEL S1200BTL 1000 INTL 20100331) (XEN) ACPI: SSDT BEFE9E18, 017B (r2 INTEL S1200BTL 2000 INTL 20100331) (XEN) ACPI: DMAR BEFE8F18, 0078 (r1 INTEL S1200BTL 1 INTL 1) (XEN) ACPI: HEST BEFFCF18, 00A8 (r1 INTEL S1200BTL 1 INTL 1) (XEN) ACPI: BERT BEFFED98, 0030 (r1 INTEL S1200BTL 1 INTL 1) (XEN) ACPI: ERST BEFE8C98, 0230 (r1 INTEL S1200BTL 1 INTL 1) (XEN) ACPI: EINJ BEFFC918, 0130 (r1 INTEL S1200BTL 1 INTL 1) (XEN) System RAM: 7914MB (8104940kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000240000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000fc8e0 (XEN) DMI 2.6 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x408 (XEN) ACPI: SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0] (XEN) ACPI: 32/64X FACS address mismatch in FADT - beffdd40/0000000000000000, using 32 (XEN) ACPI: wakeup_vec[beffdd4c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) (XEN) Processor #2 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) (XEN) Processor #4 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) (XEN) Processor #6 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) (XEN) Processor #1 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) (XEN) Processor #3 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) (XEN) Processor #5 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) (XEN) Processor #7 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x21] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x22] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x23] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x24] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x25] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x26] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x27] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x28] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x29] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2a] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2b] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2c] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2d] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2e] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2f] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x30] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x31] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x32] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x33] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x34] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x35] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x36] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x37] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x38] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x39] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3a] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3b] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3c] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3d] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3e] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3f] lapic_id[0xff] disabled) (XEN) ACPI: X2APIC (apic_id[0x00] uid[0x00] disabled) (XEN) ACPI: X2APIC (apic_id[0x01] uid[0x01] disabled) (XEN) ACPI: X2APIC (apic_id[0x02] uid[0x02] disabled) (XEN) ACPI: X2APIC (apic_id[0x03] uid[0x03] disabled) (XEN) ACPI: X2APIC (apic_id[0x04] uid[0x04] disabled) (XEN) ACPI: X2APIC (apic_id[0x05] uid[0x05] disabled) (XEN) ACPI: X2APIC (apic_id[0x06] uid[0x06] disabled) (XEN) ACPI: X2APIC (apic_id[0x07] uid[0x07] disabled) (XEN) ACPI: X2APIC (apic_id[0x08] uid[0x08] disabled) (XEN) ACPI: X2APIC (apic_id[0x09] uid[0x09] disabled) (XEN) ACPI: X2APIC (apic_id[0x0a] uid[0x0a] disabled) (XEN) ACPI: X2APIC (apic_id[0x0b] uid[0x0b] disabled) (XEN) ACPI: X2APIC (apic_id[0x0c] uid[0x0c] disabled) (XEN) ACPI: X2APIC (apic_id[0x0d] uid[0x0d] disabled) (XEN) ACPI: X2APIC (apic_id[0x0e] uid[0x0e] disabled) (XEN) ACPI: X2APIC (apic_id[0x0f] uid[0x0f] disabled) (XEN) ACPI: X2APIC (apic_id[0x10] uid[0x10] disabled) (XEN) ACPI: X2APIC (apic_id[0x11] uid[0x11] disabled) (XEN) ACPI: X2APIC (apic_id[0x12] uid[0x12] disabled) (XEN) ACPI: X2APIC (apic_id[0x13] uid[0x13] disabled) (XEN) ACPI: X2APIC (apic_id[0x14] uid[0x14] disabled) (XEN) ACPI: X2APIC (apic_id[0x15] uid[0x15] disabled) (XEN) ACPI: X2APIC (apic_id[0x16] uid[0x16] disabled) (XEN) ACPI: X2APIC (apic_id[0x17] uid[0x17] disabled) (XEN) ACPI: X2APIC (apic_id[0x18] uid[0x18] disabled) (XEN) ACPI: X2APIC (apic_id[0x19] uid[0x19] disabled) (XEN) ACPI: X2APIC (apic_id[0x1a] uid[0x1a] disabled) (XEN) ACPI: X2APIC (apic_id[0x1b] uid[0x1b] disabled) (XEN) ACPI: X2APIC (apic_id[0x1c] uid[0x1c] disabled) (XEN) ACPI: X2APIC (apic_id[0x1d] uid[0x1d] disabled) (XEN) ACPI: X2APIC (apic_id[0x1e] uid[0x1e] disabled) (XEN) ACPI: X2APIC (apic_id[0x1f] uid[0x1f] disabled) (XEN) ACPI: X2APIC (apic_id[0x20] uid[0x20] disabled) (XEN) ACPI: X2APIC (apic_id[0x21] uid[0x21] disabled) (XEN) ACPI: X2APIC (apic_id[0x22] uid[0x22] disabled) (XEN) ACPI: X2APIC (apic_id[0x23] uid[0x23] disabled) (XEN) ACPI: X2APIC (apic_id[0x24] uid[0x24] disabled) (XEN) ACPI: X2APIC (apic_id[0x25] uid[0x25] disabled) (XEN) ACPI: X2APIC (apic_id[0x26] uid[0x26] disabled) (XEN) ACPI: X2APIC (apic_id[0x27] uid[0x27] disabled) (XEN) ACPI: X2APIC (apic_id[0x28] uid[0x28] disabled) (XEN) ACPI: X2APIC (apic_id[0x29] uid[0x29] disabled) (XEN) ACPI: X2APIC (apic_id[0x2a] uid[0x2a] disabled) (XEN) ACPI: X2APIC (apic_id[0x2b] uid[0x2b] disabled) (XEN) ACPI: X2APIC (apic_id[0x2c] uid[0x2c] disabled) (XEN) ACPI: X2APIC (apic_id[0x2d] uid[0x2d] disabled) (XEN) ACPI: X2APIC (apic_id[0x2e] uid[0x2e] disabled) (XEN) ACPI: X2APIC (apic_id[0x2f] uid[0x2f] disabled) (XEN) ACPI: X2APIC (apic_id[0x30] uid[0x30] disabled) (XEN) ACPI: X2APIC (apic_id[0x31] uid[0x31] disabled) (XEN) ACPI: X2APIC (apic_id[0x32] uid[0x32] disabled) (XEN) ACPI: X2APIC (apic_id[0x33] uid[0x33] disabled) (XEN) ACPI: X2APIC (apic_id[0x34] uid[0x34] disabled) (XEN) ACPI: X2APIC (apic_id[0x35] uid[0x35] disabled) (XEN) ACPI: X2APIC (apic_id[0x36] uid[0x36] disabled) (XEN) ACPI: X2APIC (apic_id[0x37] uid[0x37] disabled) (XEN) ACPI: X2APIC (apic_id[0x38] uid[0x38] disabled) (XEN) ACPI: X2APIC (apic_id[0x39] uid[0x39] disabled) (XEN) ACPI: X2APIC (apic_id[0x3a] uid[0x3a] disabled) (XEN) ACPI: X2APIC (apic_id[0x3b] uid[0x3b] disabled) (XEN) ACPI: X2APIC (apic_id[0x3c] uid[0x3c] disabled) (XEN) ACPI: X2APIC (apic_id[0x3d] uid[0x3d] disabled) (XEN) ACPI: X2APIC (apic_id[0x3e] uid[0x3e] disabled) (XEN) ACPI: X2APIC (apic_id[0x3f] uid[0x3f] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 (XEN) Xen ERST support is initialized. (XEN) Using ACPI (MADT) for SMP configuration information (XEN) SMP: Allowing 128 CPUs (120 hotplug CPUs) (XEN) IRQ limits: 24 GSI, 1528 MSI/MSI-X (XEN) Switched to APIC driver x2apic_cluster. (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 3292.640 MHz processor. (XEN) Initing memory sharing. (XEN) xstate_init: using cntxt_size: 0x340 and states: 0x7 (XEN) mce_intel.c:717: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0 (XEN) Intel machine check reporting enabled (XEN) PCI: MCFG configuration 0: base f8000000 segment 0000 buses 00 - 3f (XEN) PCI: MCFG area at f8000000 reserved in E820 (XEN) PCI: Using MCFG for segment 0000 bus 00-3f (XEN) Intel VT-d iommu 0 supported page sizes: 4kB. (XEN) Intel VT-d Snoop Control enabled. (XEN) Intel VT-d Dom0 DMA Passthrough not enabled. (XEN) Intel VT-d Queued Invalidation enabled. (XEN) Intel VT-d Interrupt Remapping enabled. (XEN) Intel VT-d Shared EPT tables not enabled. (XEN) I/O virtualisation enabled (XEN) - Dom0 mode: Relaxed (XEN) Interrupt remapping enabled (XEN) Enabled directed EOI with ioapic_ack_old on! (XEN) ENABLING IO-APIC IRQs (XEN) -> Using old ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) TSC deadline timer enabled (XEN) Platform timer is 14.318MHz HPET (XEN) Allocated console ring of 64 KiB. (XEN) mwait-idle: MWAIT substates: 0x1120 (XEN) mwait-idle: v0.4 model 0x3a (XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) - Unrestricted Guest (XEN) HVM: ASIDs enabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging (HAP) detected (XEN) HVM: HAP page sizes: 4kB, 2MB (XEN) Brought up 8 CPUs (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) mtrr: your CPUs had inconsistent variable MTRR settings (XEN) mtrr: probably your BIOS does not setup all CPUs. (XEN) mtrr: corrected configuration. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1ebc000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000230000000->0000000234000000 (1938466 pages to be allocated) (XEN) Init. ramdisk: 000000023da18000->000000023ffffa00 (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81ebc000 (XEN) Init. ramdisk: ffffffff81ebc000->ffffffff844a3a00 (XEN) Phys-Mach map: ffffffff844a4000->ffffffff853a1050 (XEN) Start info: ffffffff853a2000->ffffffff853a24b4 (XEN) Page tables: ffffffff853a3000->ffffffff853d2000 (XEN) Boot stack: ffffffff853d2000->ffffffff853d3000 (XEN) TOTAL: ffffffff80000000->ffffffff85800000 (XEN) ENTRY ADDRESS: ffffffff818c41f0 (XEN) Dom0 has maximum 8 VCPUs (XEN) Scrubbing Free RAM: .done. (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Std. Loglevel: All (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 260kB init memory. (XEN) PCI add device 0000:00:00.0 (XEN) PCI add device 0000:00:19.0 (XEN) PCI add device 0000:00:1a.0 (XEN) PCI add device 0000:00:1c.0 (XEN) PCI add device 0000:00:1c.4 (XEN) PCI add device 0000:00:1c.5 (XEN) PCI add device 0000:00:1d.0 (XEN) PCI add device 0000:00:1e.0 (XEN) PCI add device 0000:00:1f.0 (XEN) PCI add device 0000:00:1f.2 (XEN) PCI add device 0000:00:1f.3 (XEN) PCI add device 0000:02:00.0 (XEN) PCI add device 0000:03:00.0 (XEN) PCI add device 0000:04:00.0 (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa (XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa [-- Attachment #5: xen4.1xldmesg.txt --] [-- Type: text/plain, Size: 15639 bytes --] (XEN) Xen version 4.1.4 (Debian 4.1.4-3+deb7u1) (carnil@debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) Sun May 5 14:44:49 UTC 2013 (XEN) Bootloader: GRUB 2.00-22 (XEN) Command line: placeholder loglvl=all (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 0 MBR signatures (XEN) Found 4 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009bc00 (usable) (XEN) 000000000009bc00 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000ab9a7000 (usable) (XEN) 00000000ab9a7000 - 00000000bba28000 (ACPI NVS) (XEN) 00000000bba28000 - 00000000bc483000 (usable) (XEN) 00000000bc483000 - 00000000bc5b9000 (reserved) (XEN) 00000000bc5b9000 - 00000000beadd000 (usable) (XEN) 00000000beadd000 - 00000000beaee000 (reserved) (XEN) 00000000beaee000 - 00000000bed27000 (usable) (XEN) 00000000bed27000 - 00000000bede0000 (reserved) (XEN) 00000000bede0000 - 00000000befe0000 (ACPI NVS) (XEN) 00000000befe0000 - 00000000befff000 (ACPI data) (XEN) 00000000befff000 - 00000000bf000000 (usable) (XEN) 00000000bf000000 - 00000000c0000000 (reserved) (XEN) 00000000f8000000 - 00000000fc000000 (reserved) (XEN) 00000000fec00000 - 00000000fec01000 (reserved) (XEN) 00000000fed19000 - 00000000fed1a000 (reserved) (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffa00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000240000000 (usable) (XEN) ACPI: RSDP 000F0410, 0024 (r2 INTEL) (XEN) ACPI: XSDT BEFFDE18, 00B4 (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: FACP BEFFCD98, 00F4 (r4 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: DSDT BEFEE018, CE48 (r2 INTEL S1200BTL 0 INTL 20100331) (XEN) ACPI: FACS BEFFDD40, 0040 (XEN) ACPI: APIC BEFFB018, 0652 (r3 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: SPMI BEFFEC98, 0040 (r5 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: MCFG BEFFEC18, 003C (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: WDDT BEFFEF18, 0040 (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: HPET BEFFEE98, 0038 (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: SSDT BEFEB018, 10A8 (r2 INTEL S1200BTL 1000 INTL 20100331) (XEN) ACPI: BOOT BEFFEE18, 0028 (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: SSDT BEFE7698, 05E0 (r2 INTEL S1200BTL 3000 INTL 20100331) (XEN) ACPI: SSDT BEFE6018, 0A92 (r2 INTEL S1200BTL 3000 INTL 20100331) (XEN) ACPI: SSDT BEFEA598, 054D (r1 INTEL S1200BTL 1000 INTL 20100331) (XEN) ACPI: SSDT BEFFDB18, 0069 (r1 INTEL S1200BTL 1000 INTL 20100331) (XEN) ACPI: SSDT BEFE9E18, 017B (r2 INTEL S1200BTL 2000 INTL 20100331) (XEN) ACPI: DMAR BEFE8F18, 0078 (r1 INTEL S1200BTL 1 INTL 1) (XEN) ACPI: HEST BEFFCF18, 00A8 (r1 INTEL S1200BTL 1 INTL 1) (XEN) ACPI: BERT BEFFED98, 0030 (r1 INTEL S1200BTL 1 INTL 1) (XEN) ACPI: ERST BEFE8C98, 0230 (r1 INTEL S1200BTL 1 INTL 1) (XEN) ACPI: EINJ BEFFC918, 0130 (r1 INTEL S1200BTL 1 INTL 1) (XEN) System RAM: 7914MB (8104940kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000240000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000fc8e0 (XEN) DMI 2.6 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x408 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0] (XEN) ACPI: 32/64X FACS address mismatch in FADT - beffdd40/0000000000000000, using 32 (XEN) ACPI: wakeup_vec[beffdd4c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) (XEN) Processor #2 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) (XEN) Processor #4 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) (XEN) Processor #6 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) (XEN) Processor #1 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) (XEN) Processor #3 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) (XEN) Processor #5 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) (XEN) Processor #7 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x21] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x22] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x23] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x24] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x25] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x26] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x27] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x28] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x29] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2a] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2b] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2c] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2d] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2e] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2f] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x30] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x31] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x32] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x33] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x34] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x35] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x36] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x37] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x38] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x39] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3a] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3b] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3c] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3d] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3e] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3f] lapic_id[0xff] disabled) (XEN) ACPI: X2APIC (apic_id[0x00] uid[0x00] disabled) (XEN) ACPI: X2APIC (apic_id[0x01] uid[0x01] disabled) (XEN) ACPI: X2APIC (apic_id[0x02] uid[0x02] disabled) (XEN) ACPI: X2APIC (apic_id[0x03] uid[0x03] disabled) (XEN) ACPI: X2APIC (apic_id[0x04] uid[0x04] disabled) (XEN) ACPI: X2APIC (apic_id[0x05] uid[0x05] disabled) (XEN) ACPI: X2APIC (apic_id[0x06] uid[0x06] disabled) (XEN) ACPI: X2APIC (apic_id[0x07] uid[0x07] disabled) (XEN) ACPI: X2APIC (apic_id[0x08] uid[0x08] disabled) (XEN) ACPI: X2APIC (apic_id[0x09] uid[0x09] disabled) (XEN) ACPI: X2APIC (apic_id[0x0a] uid[0x0a] disabled) (XEN) ACPI: X2APIC (apic_id[0x0b] uid[0x0b] disabled) (XEN) ACPI: X2APIC (apic_id[0x0c] uid[0x0c] disabled) (XEN) ACPI: X2APIC (apic_id[0x0d] uid[0x0d] disabled) (XEN) ACPI: X2APIC (apic_id[0x0e] uid[0x0e] disabled) (XEN) ACPI: X2APIC (apic_id[0x0f] uid[0x0f] disabled) (XEN) ACPI: X2APIC (apic_id[0x10] uid[0x10] disabled) (XEN) ACPI: X2APIC (apic_id[0x11] uid[0x11] disabled) (XEN) ACPI: X2APIC (apic_id[0x12] uid[0x12] disabled) (XEN) ACPI: X2APIC (apic_id[0x13] uid[0x13] disabled) (XEN) ACPI: X2APIC (apic_id[0x14] uid[0x14] disabled) (XEN) ACPI: X2APIC (apic_id[0x15] uid[0x15] disabled) (XEN) ACPI: X2APIC (apic_id[0x16] uid[0x16] disabled) (XEN) ACPI: X2APIC (apic_id[0x17] uid[0x17] disabled) (XEN) ACPI: X2APIC (apic_id[0x18] uid[0x18] disabled) (XEN) ACPI: X2APIC (apic_id[0x19] uid[0x19] disabled) (XEN) ACPI: X2APIC (apic_id[0x1a] uid[0x1a] disabled) (XEN) ACPI: X2APIC (apic_id[0x1b] uid[0x1b] disabled) (XEN) ACPI: X2APIC (apic_id[0x1c] uid[0x1c] disabled) (XEN) ACPI: X2APIC (apic_id[0x1d] uid[0x1d] disabled) (XEN) ACPI: X2APIC (apic_id[0x1e] uid[0x1e] disabled) (XEN) ACPI: X2APIC (apic_id[0x1f] uid[0x1f] disabled) (XEN) ACPI: X2APIC (apic_id[0x20] uid[0x20] disabled) (XEN) ACPI: X2APIC (apic_id[0x21] uid[0x21] disabled) (XEN) ACPI: X2APIC (apic_id[0x22] uid[0x22] disabled) (XEN) ACPI: X2APIC (apic_id[0x23] uid[0x23] disabled) (XEN) ACPI: X2APIC (apic_id[0x24] uid[0x24] disabled) (XEN) ACPI: X2APIC (apic_id[0x25] uid[0x25] disabled) (XEN) ACPI: X2APIC (apic_id[0x26] uid[0x26] disabled) (XEN) ACPI: X2APIC (apic_id[0x27] uid[0x27] disabled) (XEN) ACPI: X2APIC (apic_id[0x28] uid[0x28] disabled) (XEN) ACPI: X2APIC (apic_id[0x29] uid[0x29] disabled) (XEN) ACPI: X2APIC (apic_id[0x2a] uid[0x2a] disabled) (XEN) ACPI: X2APIC (apic_id[0x2b] uid[0x2b] disabled) (XEN) ACPI: X2APIC (apic_id[0x2c] uid[0x2c] disabled) (XEN) ACPI: X2APIC (apic_id[0x2d] uid[0x2d] disabled) (XEN) ACPI: X2APIC (apic_id[0x2e] uid[0x2e] disabled) (XEN) ACPI: X2APIC (apic_id[0x2f] uid[0x2f] disabled) (XEN) ACPI: X2APIC (apic_id[0x30] uid[0x30] disabled) (XEN) ACPI: X2APIC (apic_id[0x31] uid[0x31] disabled) (XEN) ACPI: X2APIC (apic_id[0x32] uid[0x32] disabled) (XEN) ACPI: X2APIC (apic_id[0x33] uid[0x33] disabled) (XEN) ACPI: X2APIC (apic_id[0x34] uid[0x34] disabled) (XEN) ACPI: X2APIC (apic_id[0x35] uid[0x35] disabled) (XEN) ACPI: X2APIC (apic_id[0x36] uid[0x36] disabled) (XEN) ACPI: X2APIC (apic_id[0x37] uid[0x37] disabled) (XEN) ACPI: X2APIC (apic_id[0x38] uid[0x38] disabled) (XEN) ACPI: X2APIC (apic_id[0x39] uid[0x39] disabled) (XEN) ACPI: X2APIC (apic_id[0x3a] uid[0x3a] disabled) (XEN) ACPI: X2APIC (apic_id[0x3b] uid[0x3b] disabled) (XEN) ACPI: X2APIC (apic_id[0x3c] uid[0x3c] disabled) (XEN) ACPI: X2APIC (apic_id[0x3d] uid[0x3d] disabled) (XEN) ACPI: X2APIC (apic_id[0x3e] uid[0x3e] disabled) (XEN) ACPI: X2APIC (apic_id[0x3f] uid[0x3f] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 (XEN) PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 (XEN) PCI: MCFG area at f8000000 reserved in E820 (XEN) Xen ERST support is initialized. (XEN) Using ACPI (MADT) for SMP configuration information (XEN) IRQ limits: 24 GSI, 1528 MSI/MSI-X (XEN) Switched to APIC driver x2apic_cluster. (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 3292.651 MHz processor. (XEN) Initing memory sharing. (XEN) mce_intel.c:1162: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0 (XEN) Intel machine check reporting enabled (XEN) Intel VT-d supported page sizes: 4kB. (XEN) Intel VT-d Snoop Control enabled. (XEN) Intel VT-d Dom0 DMA Passthrough not enabled. (XEN) Intel VT-d Queued Invalidation enabled. (XEN) Intel VT-d Interrupt Remapping enabled. (XEN) Intel VT-d Shared EPT tables not enabled. (XEN) I/O virtualisation enabled (XEN) - Dom0 mode: Relaxed (XEN) Enabled directed EOI with ioapic_ack_old on! (XEN) ENABLING IO-APIC IRQs (XEN) -> Using old ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) TSC deadline timer enabled (XEN) Platform timer is 14.318MHz HPET (XEN) Allocated console ring of 64 KiB. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) - Unrestricted Guest (XEN) HVM: ASIDs enabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging (HAP) detected (XEN) HVM: HAP page sizes: 4kB, 2MB (XEN) Brought up 8 CPUs (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) mtrr: your CPUs had inconsistent variable MTRR settings (XEN) mtrr: probably your BIOS does not setup all CPUs. (XEN) mtrr: corrected configuration. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1ebc000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000230000000->0000000234000000 (1938507 pages to be allocated) (XEN) Init. ramdisk: 000000023da18000->000000023ffffa00 (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81ebc000 (XEN) Init. ramdisk: ffffffff81ebc000->ffffffff844a3a00 (XEN) Phys-Mach map: ffffffff844a4000->ffffffff853a1198 (XEN) Start info: ffffffff853a2000->ffffffff853a24b4 (XEN) Page tables: ffffffff853a3000->ffffffff853d2000 (XEN) Boot stack: ffffffff853d2000->ffffffff853d3000 (XEN) TOTAL: ffffffff80000000->ffffffff85800000 (XEN) ENTRY ADDRESS: ffffffff818c41f0 (XEN) Dom0 has maximum 8 VCPUs (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 244kB init memory. (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:19.0 (XEN) PCI add device 00:1a.0 (XEN) PCI add device 00:1c.0 (XEN) PCI add device 00:1c.4 (XEN) PCI add device 00:1c.5 (XEN) PCI add device 00:1d.0 (XEN) PCI add device 00:1e.0 (XEN) PCI add device 00:1f.0 (XEN) PCI add device 00:1f.2 (XEN) PCI add device 00:1f.3 (XEN) PCI add device 02:00.0 (XEN) PCI add device 03:00.0 (XEN) PCI add device 04:00.0 (XEN) physdev.c:168: dom0: wrong map_pirq type 3 (XEN) traps.c:3068: GPF (0000): ffff82c48017f1e0 -> ffff82c480201e7c (XEN) traps.c:3068: GPF (0000): ffff82c48017f1e0 -> ffff82c480201e7c [-- Attachment #6: Type: text/plain, Size: 126 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 24+ messages in thread
[parent not found: <fc.011fc823e66acc6f3b9aca005d0d88ff.e66acc76@estone.ca>]
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile [not found] ` <fc.011fc823e66acc6f3b9aca005d0d88ff.e66acc76@estone.ca> @ 2014-05-19 10:56 ` Jan Beulich 0 siblings, 0 replies; 24+ messages in thread From: Jan Beulich @ 2014-05-19 10:56 UTC (permalink / raw) To: Mike Egglestone; +Cc: 748052, xen-devel >>> On 16.05.14 at 18:04, <mike@estone.ca> wrote: > Attached are the most recent boot logs. > All tests have been on the same system, an Intel S1200BTL motherboard. > > I did 2 boots, both with kernel 3.13. > First one into xen 4.3 and the 2nd into xen 4.1. > The keyboard works on xen 4.1, not on 4.3. Following some driver inspection using the messages you provided, I guess the only possible failure location is ehci_setup() -> ehci_halt() -> ehci_handshake(), but of course I can't really guess what's going wrong here. There are a few other pieces of information still missing that we asked for before, plus - I'm not sure whether it was mentioned - the hypervisor still is being run without "iommu=debug" in place on its command line. Jan ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 failed with error -110" 2014-05-16 15:31 ` Ian Campbell 2014-05-16 15:51 ` Jan Beulich @ 2014-05-16 15:55 ` Jan Beulich 2014-05-16 17:05 ` dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile Mike Egglestone [not found] ` <fc.011fc823e66acc853b9aca005d0d88ff.e66acc88@estone.ca> 2014-05-21 17:44 ` Mike Egglestone [not found] ` <fc.011fc823e66ace343b9aca005d0d88ff.e66ace35@estone.ca> 3 siblings, 2 replies; 24+ messages in thread From: Jan Beulich @ 2014-05-16 15:55 UTC (permalink / raw) To: Mike Egglestone, Ian Campbell; +Cc: 748052, xen-devel >>> On 16.05.14 at 17:31, <ijc@hellion.org.uk> wrote: > On Fri, 2014-05-16 at 11:08 +0100, Jan Beulich wrote: >> And finally, looking at the IRQ usage, this >> >> [ 2.087722] xen: registering gsi 22 triggering 0 polarity 1 >> [ 2.087731] xen: --> pirq=22 -> irq=22 (gsi=22) >> [ 2.100161] xen: registering gsi 20 triggering 0 polarity 1 >> [ 2.100166] xen: --> pirq=20 -> irq=20 (gsi=20) >> >> happens rather early - it's not clear to me in which context that is. >> And there's no problem with GSI 22 used by the other EHCI HC, so >> a fundamental question is what other device(s) is/are using GSI 20 >> (not visible from the non-Xen kernel log). What occurred to me right after sending the previous reply - I think it was said earlier that it doesn't matter which port the keyboard was plugged in. Does that hold if it gets plugged into a port connected to the other EHCI HC? I.e. does the failure then occur during the other driver initialization instance? Jan ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile 2014-05-16 15:55 ` dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 failed with error -110" Jan Beulich @ 2014-05-16 17:05 ` Mike Egglestone [not found] ` <fc.011fc823e66acc853b9aca005d0d88ff.e66acc88@estone.ca> 1 sibling, 0 replies; 24+ messages in thread From: Mike Egglestone @ 2014-05-16 17:05 UTC (permalink / raw) To: JBeulich; +Cc: 748052, xen-devel, ijc [-- Attachment #1.1: Type: text/plain, Size: 455 bytes --] Here's some more info: I went into the BIOS, Advanced Tab-->USB Configuration and set the following: USB Controller [Enabled] Legacy USB Support [Disabled] Port 60/64 Emulation [Disabled] Make USB Devices Non-Bootable [Disasbled] Device Reset timeout [20 sec] I then rebooted into xen4.3 kernel 3.13. The keyboard does NOT work at the grub menu. But 5 seconds pass and the system boots. Once at the login console, then keyboard works! [-- Attachment #1.2: Type: text/html, Size: 3481 bytes --] [-- Attachment #2: dmesgnolegacyusb.txt --] [-- Type: text/plain, Size: 62801 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Debian 3.13.10-1 (2014-04-15) [ 0.000000] Command line: placeholder root=UUID=24e080dd-79b1-444c-8a7d-36e54ed2f4ca ro quiet [ 0.000000] Freeing 9b-100 pfn range: 101 pages freed [ 0.000000] 1-1 mapping on 9b->100 [ 0.000000] Freeing ab9a7-bba28 pfn range: 65665 pages freed [ 0.000000] 1-1 mapping on ab9a7->bba28 [ 0.000000] Freeing bc483-bc5b9 pfn range: 310 pages freed [ 0.000000] 1-1 mapping on bc483->bc5b9 [ 0.000000] Freeing beadd-beaee pfn range: 17 pages freed [ 0.000000] 1-1 mapping on beadd->beaee [ 0.000000] Freeing bed27-befff pfn range: 728 pages freed [ 0.000000] 1-1 mapping on bed27->befff [ 0.000000] Freeing bf000-100000 pfn range: 266240 pages freed [ 0.000000] 1-1 mapping on bf000->100000 [ 0.000000] Released 333061 pages of unused memory [ 0.000000] Set 333061 page(s) to 1-1 mapping [ 0.000000] Populating 1dfa0a-230f0f pfn range: 333061 pages added [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x00000000ab9a6fff] usable [ 0.000000] Xen: [mem 0x00000000ab9a7000-0x00000000bba27fff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bba28000-0x00000000bc482fff] usable [ 0.000000] Xen: [mem 0x00000000bc483000-0x00000000bc5b8fff] reserved [ 0.000000] Xen: [mem 0x00000000bc5b9000-0x00000000beadcfff] usable [ 0.000000] Xen: [mem 0x00000000beadd000-0x00000000beaedfff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000bed26fff] usable [ 0.000000] Xen: [mem 0x00000000bed27000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000befff000-0x00000000beffffff] usable [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x000000023fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation S1200BTL/S1200BTL, BIOS S1200BT.86B.02.00.0041.120520121743 12/05/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x230c00000-0x230dfffff] [ 0.000000] [mem 0x230c00000-0x230dfffff] page 4k [ 0.000000] BRK [0x01ab9000, 0x01ab9fff] PGTABLE [ 0.000000] BRK [0x01aba000, 0x01abafff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x230000000-0x230bfffff] [ 0.000000] [mem 0x230000000-0x230bfffff] page 4k [ 0.000000] BRK [0x01abb000, 0x01abbfff] PGTABLE [ 0.000000] BRK [0x01abc000, 0x01abcfff] PGTABLE [ 0.000000] BRK [0x01abd000, 0x01abdfff] PGTABLE [ 0.000000] BRK [0x01abe000, 0x01abefff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x200000000-0x22fffffff] [ 0.000000] [mem 0x200000000-0x22fffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x00100000-0xab9a6fff] [ 0.000000] [mem 0x00100000-0xab9a6fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbba28000-0xbc482fff] [ 0.000000] [mem 0xbba28000-0xbc482fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbc5b9000-0xbeadcfff] [ 0.000000] [mem 0xbc5b9000-0xbeadcfff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbeaee000-0xbed26fff] [ 0.000000] [mem 0xbeaee000-0xbed26fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbefff000-0xbeffffff] [ 0.000000] [mem 0xbefff000-0xbeffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x230e00000-0x23fffffff] [ 0.000000] [mem 0x230e00000-0x23fffffff] page 4k [ 0.000000] RAMDISK: [mem 0x01ebc000-0x044a3fff] [ 0.000000] ACPI: RSDP 00000000000f0410 000024 (v02 INTEL) [ 0.000000] ACPI: XSDT 00000000beffde18 0000B4 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: FACP 00000000beffcd98 0000F4 (v04 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: DSDT 00000000befee018 00CE48 (v02 INTEL S1200BTL 00000000 INTL 20100331) [ 0.000000] ACPI: FACS 00000000beffdd40 000040 [ 0.000000] ACPI: APIC 00000000beffb018 000652 (v03 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: SPMI 00000000beffec98 000040 (v05 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: MCFG 00000000beffec18 00003C (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: WDDT 00000000beffef18 000040 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: HPET 00000000beffee98 000038 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: SSDT 00000000befeb018 0010A8 (v02 INTEL S1200BTL 00001000 INTL 20100331) [ 0.000000] ACPI: BOOT 00000000beffee18 000028 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: SSDT 00000000befe7698 0005E0 (v02 INTEL S1200BTL 00003000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000befe6018 000A92 (v02 INTEL S1200BTL 00003000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000befea598 00054D (v01 INTEL S1200BTL 00001000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000beffdb18 000069 (v01 INTEL S1200BTL 00001000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000befe9e18 00017B (v02 INTEL S1200BTL 00002000 INTL 20100331) [ 0.000000] ACPI: XMAR 00000000befe8f18 000078 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: HEST 00000000beffcf18 0000A8 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 00000000beffed98 000030 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 00000000befe8c98 000230 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 00000000beffc918 000130 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff] [ 0.000000] NODE_DATA [mem 0x230f0a000-0x230f0efff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x23fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009afff] [ 0.000000] node 0: [mem 0x00100000-0xab9a6fff] [ 0.000000] node 0: [mem 0xbba28000-0xbc482fff] [ 0.000000] node 0: [mem 0xbc5b9000-0xbeadcfff] [ 0.000000] node 0: [mem 0xbeaee000-0xbed26fff] [ 0.000000] node 0: [mem 0xbefff000-0xbeffffff] [ 0.000000] node 0: [mem 0x100000000-0x23fffffff] [ 0.000000] On node 0 totalpages: 2026234 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3994 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9728 pages used for memmap [ 0.000000] DMA32 zone: 711520 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: X2APIC (apic_id[0x00] uid[0x00] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x01] uid[0x01] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x02] uid[0x02] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x03] uid[0x03] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x04] uid[0x04] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x05] uid[0x05] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x06] uid[0x06] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x07] uid[0x07] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x08] uid[0x08] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x09] uid[0x09] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0a] uid[0x0a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0b] uid[0x0b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0c] uid[0x0c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0d] uid[0x0d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0e] uid[0x0e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0f] uid[0x0f] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x10] uid[0x10] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x11] uid[0x11] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x12] uid[0x12] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x13] uid[0x13] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x14] uid[0x14] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x15] uid[0x15] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x16] uid[0x16] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x17] uid[0x17] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x18] uid[0x18] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x19] uid[0x19] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1a] uid[0x1a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1b] uid[0x1b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1c] uid[0x1c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1d] uid[0x1d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1e] uid[0x1e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1f] uid[0x1f] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x20] uid[0x20] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x21] uid[0x21] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x22] uid[0x22] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x23] uid[0x23] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x24] uid[0x24] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x25] uid[0x25] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x26] uid[0x26] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x27] uid[0x27] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x28] uid[0x28] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x29] uid[0x29] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2a] uid[0x2a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2b] uid[0x2b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2c] uid[0x2c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2d] uid[0x2d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2e] uid[0x2e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2f] uid[0x2f] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x30] uid[0x30] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x31] uid[0x31] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x32] uid[0x32] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x33] uid[0x33] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x34] uid[0x34] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x35] uid[0x35] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x36] uid[0x36] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x37] uid[0x37] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x38] uid[0x38] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x39] uid[0x39] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3a] uid[0x3a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3b] uid[0x3b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3c] uid[0x3c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3d] uid[0x3d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3e] uid[0x3e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3f] uid[0x3f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x21] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x22] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x23] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x24] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x25] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x26] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x27] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x28] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x29] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x30] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x31] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x32] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x33] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x34] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x35] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x36] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x37] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x38] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x39] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 128 CPUs, 120 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xab9a7000-0xbba27fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc483000-0xbc5b8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbeadd000-0xbeaedfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbed27000-0xbeddffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbede0000-0xbefdffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbefe0000-0xbeffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed18fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed19000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.3.0 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:128 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880226800000 s85824 r8192 d20672 u131072 [ 0.000000] pcpu-alloc: s85824 r8192 d20672 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 000 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 [ 0.000000] pcpu-alloc: [0] 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 [ 0.000000] pcpu-alloc: [0] 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 [ 0.000000] pcpu-alloc: [0] 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 [ 0.000000] pcpu-alloc: [0] 064 065 066 067 068 069 070 071 072 073 074 075 076 077 078 079 [ 0.000000] pcpu-alloc: [0] 080 081 082 083 084 085 086 087 088 089 090 091 092 093 094 095 [ 0.000000] pcpu-alloc: [0] 096 097 098 099 100 101 102 103 104 105 106 107 108 109 110 111 [ 0.000000] pcpu-alloc: [0] 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 [ 2.511920] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1998509 [ 2.511921] Policy zone: Normal [ 2.511923] Kernel command line: placeholder root=UUID=24e080dd-79b1-444c-8a7d-36e54ed2f4ca ro quiet [ 2.512097] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 2.512131] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 2.541370] software IO TLB [mem 0x222800000-0x226800000] (64MB) mapped at [ffff880222800000-ffff8802267fffff] [ 2.570860] Memory: 7583304K/8104936K available (4811K kernel code, 693K rwdata, 1620K rodata, 984K init, 952K bss, 521632K reserved) [ 2.570914] Hierarchical RCU implementation. [ 2.570915] RCU dyntick-idle grace-period acceleration is enabled. [ 2.570916] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 2.570921] NR_IRQS:33024 nr_irqs:744 16 [ 2.570972] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 2.570974] xen: registering gsi 9 triggering 0 polarity 0 [ 2.570984] xen: --> pirq=9 -> irq=9 (gsi=9) [ 2.571004] xen: acpi sci 9 [ 2.571006] xen: --> pirq=1 -> irq=1 (gsi=1) [ 2.571008] xen: --> pirq=2 -> irq=2 (gsi=2) [ 2.571011] xen: --> pirq=3 -> irq=3 (gsi=3) [ 2.571012] xen: --> pirq=4 -> irq=4 (gsi=4) [ 2.571014] xen: --> pirq=5 -> irq=5 (gsi=5) [ 2.571015] xen: --> pirq=6 -> irq=6 (gsi=6) [ 2.571017] xen: --> pirq=7 -> irq=7 (gsi=7) [ 2.571019] xen: --> pirq=8 -> irq=8 (gsi=8) [ 2.571020] xen: --> pirq=10 -> irq=10 (gsi=10) [ 2.571022] xen: --> pirq=11 -> irq=11 (gsi=11) [ 2.571023] xen: --> pirq=12 -> irq=12 (gsi=12) [ 2.571025] xen: --> pirq=13 -> irq=13 (gsi=13) [ 2.571027] xen: --> pirq=14 -> irq=14 (gsi=14) [ 2.571028] xen: --> pirq=15 -> irq=15 (gsi=15) [ 2.579471] Console: colour VGA+ 80x25 [ 2.579552] console [tty0] enabled [ 2.579574] Xen: using vcpuop timer interface [ 2.579577] installing Xen timer for CPU 0 [ 2.579594] tsc: Detected 3292.612 MHz processor [ 2.579598] Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.22 BogoMIPS (lpj=13170448) [ 2.579599] pid_max: default: 32768 minimum: 301 [ 2.579616] Security Framework initialized [ 2.579619] AppArmor: AppArmor disabled by boot time parameter [ 2.579620] Yama: disabled by default; enable with sysctl kernel.yama.* [ 2.580412] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 2.582641] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 2.583502] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 2.583515] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 2.583716] Initializing cgroup subsys memory [ 2.583720] Initializing cgroup subsys devices [ 2.583722] Initializing cgroup subsys freezer [ 2.583723] Initializing cgroup subsys blkio [ 2.583724] Initializing cgroup subsys perf_event [ 2.583767] CPU: Physical Processor ID: 0 [ 2.583768] CPU: Processor Core ID: 0 [ 2.584036] mce: CPU supports 2 MCE banks [ 2.584049] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 2.584049] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 2.584049] tlb_flushall_shift: 2 [ 2.584120] Freeing SMP alternatives memory: 20K (ffffffff819a5000 - ffffffff819aa000) [ 2.584936] ACPI: Core revision 20131115 [ 2.589218] ACPI: All ACPI Tables successfully acquired [ 2.591514] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 2.591692] NMI watchdog: disabled (cpu0): hardware events not enabled [ 2.591749] installing Xen timer for CPU 1 [ 2.592288] installing Xen timer for CPU 2 [ 2.592813] installing Xen timer for CPU 3 [ 2.593329] installing Xen timer for CPU 4 [ 2.593845] installing Xen timer for CPU 5 [ 2.594352] installing Xen timer for CPU 6 [ 2.594841] installing Xen timer for CPU 7 [ 2.595244] x86: Booted up 1 node, 8 CPUs [ 2.595448] devtmpfs: initialized [ 2.597544] PM: Registering ACPI NVS region [mem 0xab9a7000-0xbba27fff] (268963840 bytes) [ 2.600995] PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 2.601167] xen:grant_table: Grant tables using version 2 layout [ 2.601176] Grant table initialized [ 2.601231] NET: Registered protocol family 16 [ 2.601368] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 2.601370] ACPI: bus type PCI registered [ 2.601371] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 2.601522] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 2.601524] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 2.609763] PCI: Using configuration type 1 for base access [ 2.610364] bio: create slab <bio-0> at 0 [ 2.610560] ACPI: Added _OSI(Module Device) [ 2.610561] ACPI: Added _OSI(Processor Device) [ 2.610562] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.610563] ACPI: Added _OSI(Processor Aggregator Device) [ 2.612620] ACPI: Executed 1 blocks of module-level executable AML code [ 2.636575] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 2.637209] ACPI: SSDT 00000000bedbb018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 2.637453] ACPI: Dynamic OEM Table Load: [ 2.637454] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 2.648936] ACPI: SSDT 00000000bedbca98 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 2.649199] ACPI: Dynamic OEM Table Load: [ 2.649200] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 2.661074] ACPI: SSDT 00000000bedbad98 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 2.661315] ACPI: Dynamic OEM Table Load: [ 2.661316] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 2.674063] ACPI: Interpreter enabled [ 2.674072] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 2.674078] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580) [ 2.674082] ACPI: (supports S0 S1 S3 S5) [ 2.674083] ACPI: Using IOAPIC for interrupt routing [ 2.674119] HEST: Table parsing has been initialized. [ 2.674121] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.674303] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 2.678476] ACPI: Power Resource [FN00] (off) [ 2.678535] ACPI: Power Resource [FN01] (off) [ 2.678586] ACPI: Power Resource [FN02] (off) [ 2.678636] ACPI: Power Resource [FN03] (off) [ 2.678685] ACPI: Power Resource [FN04] (off) [ 2.679086] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 2.679090] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 2.679380] acpi PNP0A08:00: _OSC: platform does not support [AER] [ 2.679700] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 2.680184] PCI host bridge to bus 0000:00 [ 2.680187] pci_bus 0000:00: root bus resource [bus 00-3e] [ 2.680188] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 2.680189] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 2.680190] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 2.680192] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff] [ 2.680193] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 2.680194] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 2.680195] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 2.680196] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 2.680197] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 2.680198] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 2.680199] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff] [ 2.680200] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 2.680211] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 [ 2.680400] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 2.680442] pci 0000:00:19.0: reg 0x10: [mem 0xc2500000-0xc251ffff] [ 2.680459] pci 0000:00:19.0: reg 0x14: [mem 0xc2570000-0xc2570fff] [ 2.680477] pci 0000:00:19.0: reg 0x18: [io 0x5040-0x505f] [ 2.680629] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 2.680678] pci 0000:00:19.0: System wakeup disabled by ACPI [ 2.680728] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 2.680769] pci 0000:00:1a.0: reg 0x10: [mem 0xc2560000-0xc25603ff] [ 2.680956] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.681015] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 2.681060] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 2.681232] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.681286] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 2.681340] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 2.681513] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 2.681567] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 2.681609] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400 [ 2.681781] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 2.681834] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 2.681887] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 2.681928] pci 0000:00:1d.0: reg 0x10: [mem 0xc2550000-0xc25503ff] [ 2.682114] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.682173] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 2.682213] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.682367] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 2.682405] pci 0000:00:1f.0: [8086:1c54] type 00 class 0x060100 [ 2.682673] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 2.682719] pci 0000:00:1f.2: reg 0x10: [io 0x5090-0x5097] [ 2.682736] pci 0000:00:1f.2: reg 0x14: [io 0x5080-0x5083] [ 2.682753] pci 0000:00:1f.2: reg 0x18: [io 0x5070-0x5077] [ 2.682771] pci 0000:00:1f.2: reg 0x1c: [io 0x5060-0x5063] [ 2.682788] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f] [ 2.682805] pci 0000:00:1f.2: reg 0x24: [mem 0xc2540000-0xc25407ff] [ 2.682922] pci 0000:00:1f.2: PME# supported from D3hot [ 2.683004] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 2.683038] pci 0000:00:1f.3: reg 0x10: [mem 0xc2530000-0xc25300ff 64bit] [ 2.683088] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f] [ 2.683289] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 2.683295] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 2.683301] pci 0000:00:1c.0: bridge window [mem 0xc1900000-0xc22fffff] [ 2.683312] pci 0000:00:1c.0: bridge window [mem 0xc2600000-0xc2ffffff 64bit pref] [ 2.683477] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 [ 2.683520] pci 0000:02:00.0: reg 0x10: [mem 0xc2400000-0xc241ffff] [ 2.683581] pci 0000:02:00.0: reg 0x18: [io 0x3000-0x301f] [ 2.683612] pci 0000:02:00.0: reg 0x1c: [mem 0xc2420000-0xc2423fff] [ 2.683874] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 2.683945] pci 0000:02:00.0: System wakeup disabled by ACPI [ 2.689525] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 2.689533] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 2.689539] pci 0000:00:1c.4: bridge window [mem 0xc2400000-0xc24fffff] [ 2.689699] pci 0000:03:00.0: [102b:0522] type 00 class 0x030000 [ 2.689732] pci 0000:03:00.0: reg 0x10: [mem 0xc0000000-0xc0ffffff] [ 2.689757] pci 0000:03:00.0: reg 0x14: [mem 0xc1810000-0xc1813fff] [ 2.689780] pci 0000:03:00.0: reg 0x18: [mem 0xc1000000-0xc17fffff] [ 2.689871] pci 0000:03:00.0: reg 0x30: [mem 0xc1800000-0xc180ffff pref] [ 2.690026] pci 0000:03:00.0: System wakeup disabled by ACPI [ 2.697679] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 2.697691] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc18fffff] [ 2.697783] pci 0000:04:00.0: [8086:100e] type 00 class 0x020000 [ 2.697821] pci 0000:04:00.0: reg 0x10: [mem 0xc2340000-0xc235ffff] [ 2.697839] pci 0000:04:00.0: reg 0x14: [mem 0xc2320000-0xc233ffff] [ 2.697856] pci 0000:04:00.0: reg 0x18: [io 0x2000-0x203f] [ 2.697923] pci 0000:04:00.0: reg 0x30: [mem 0xc2300000-0xc231ffff pref] [ 2.698010] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 2.698136] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 2.698142] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] [ 2.698148] pci 0000:00:1e.0: bridge window [mem 0xc2300000-0xc23fffff] [ 2.698158] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 2.698159] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 2.698160] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 2.698162] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode) [ 2.698163] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 2.698164] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 2.698165] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 2.698166] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 2.698167] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 2.698169] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 2.698170] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode) [ 2.698171] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) [ 2.698225] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 2.698613] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.698653] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.698692] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.698730] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.698768] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.698807] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10 11 12 14 15) [ 2.698853] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 2.698892] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.699111] ACPI: Enabled 7 GPEs in block 00 to 3F [ 2.699116] ACPI: \_SB_.PCI0: notify handler is installed [ 2.699150] Found 1 acpi root devices [ 2.699178] xen:balloon: Initialising balloon driver [ 2.700012] xen_balloon: Initialising balloon driver [ 2.700095] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 2.700096] vgaarb: loaded [ 2.700097] vgaarb: bridge control possible 0000:03:00.0 [ 2.700122] PCI: Using ACPI for IRQ routing [ 2.704466] PCI: pci_cache_line_size set to 64 bytes [ 2.704543] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 2.704544] e820: reserve RAM buffer [mem 0xab9a7000-0xabffffff] [ 2.704545] e820: reserve RAM buffer [mem 0xbc483000-0xbfffffff] [ 2.704546] e820: reserve RAM buffer [mem 0xbeadd000-0xbfffffff] [ 2.704547] e820: reserve RAM buffer [mem 0xbed27000-0xbfffffff] [ 2.704548] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff] [ 2.704662] Switched to clocksource xen [ 2.705795] pnp: PnP ACPI init [ 2.705801] ACPI: bus type PNP registered [ 2.705831] pnp 00:00: [dma 4] [ 2.705842] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 2.705855] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 2.705916] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 2.705922] xen: registering gsi 13 triggering 1 polarity 0 [ 2.705949] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 2.705975] system 00:04: [io 0x0680-0x069f] has been reserved [ 2.705977] system 00:04: [io 0xffff] has been reserved [ 2.705978] system 00:04: [io 0xffff] has been reserved [ 2.705979] system 00:04: [io 0xffff] has been reserved [ 2.705980] system 00:04: [io 0x0400-0x0453] could not be reserved [ 2.705982] system 00:04: [io 0x0458-0x047f] has been reserved [ 2.705983] system 00:04: [io 0x0500-0x057f] has been reserved [ 2.705985] system 00:04: [io 0x164e-0x164f] has been reserved [ 2.705986] system 00:04: [io 0x0900-0x090f] has been reserved [ 2.705987] system 00:04: [io 0x0295-0x0296] has been reserved [ 2.705989] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.705994] xen: registering gsi 8 triggering 1 polarity 0 [ 2.706017] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.706045] system 00:06: [io 0x0454-0x0457] has been reserved [ 2.706047] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 2.706201] xen: registering gsi 4 triggering 1 polarity 0 [ 2.706218] pnp 00:07: [dma 0 disabled] [ 2.706251] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.706380] xen: registering gsi 3 triggering 1 polarity 0 [ 2.706396] pnp 00:08: [dma 0 disabled] [ 2.706428] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.706557] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.706559] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 2.706560] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.706561] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.706562] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 2.706564] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.706565] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 2.706566] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 2.706568] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 2.706569] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 2.706570] system 00:09: [mem 0xc2590000-0xc2590fff] has been reserved [ 2.706572] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.706740] system 00:0a: [mem 0x00000000-0x0009cfff] could not be reserved [ 2.706742] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.706775] pnp: PnP ACPI: found 11 devices [ 2.706776] ACPI: bus type PNP unregistered [ 2.711618] PM-Timer failed consistency check (0xffffff) - aborting. [ 2.711682] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 2.711686] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 2.711695] pci 0000:00:1c.0: bridge window [mem 0xc1900000-0xc22fffff] [ 2.711700] pci 0000:00:1c.0: bridge window [mem 0xc2600000-0xc2ffffff 64bit pref] [ 2.711711] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 2.711714] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 2.711722] pci 0000:00:1c.4: bridge window [mem 0xc2400000-0xc24fffff] [ 2.711737] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 2.711745] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc18fffff] [ 2.711760] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 2.711764] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] [ 2.711772] pci 0000:00:1e.0: bridge window [mem 0xc2300000-0xc23fffff] [ 2.711787] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.711788] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.711790] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.711791] pci_bus 0000:00: resource 7 [mem 0x000cc000-0x000cffff] [ 2.711792] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000d3fff] [ 2.711793] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff] [ 2.711794] pci_bus 0000:00: resource 10 [mem 0x000d8000-0x000dbfff] [ 2.711795] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000dffff] [ 2.711796] pci_bus 0000:00: resource 12 [mem 0x000e0000-0x000e3fff] [ 2.711797] pci_bus 0000:00: resource 13 [mem 0x000e4000-0x000e7fff] [ 2.711798] pci_bus 0000:00: resource 14 [mem 0xc0000000-0xfeafffff] [ 2.711799] pci_bus 0000:00: resource 15 [mem 0xfed40000-0xfed44fff] [ 2.711801] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 2.711802] pci_bus 0000:01: resource 1 [mem 0xc1900000-0xc22fffff] [ 2.711803] pci_bus 0000:01: resource 2 [mem 0xc2600000-0xc2ffffff 64bit pref] [ 2.711804] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 2.711805] pci_bus 0000:02: resource 1 [mem 0xc2400000-0xc24fffff] [ 2.711806] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc18fffff] [ 2.711807] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 2.711808] pci_bus 0000:04: resource 1 [mem 0xc2300000-0xc23fffff] [ 2.711809] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 2.711810] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 2.711811] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 2.711813] pci_bus 0000:04: resource 7 [mem 0x000cc000-0x000cffff] [ 2.711814] pci_bus 0000:04: resource 8 [mem 0x000d0000-0x000d3fff] [ 2.711815] pci_bus 0000:04: resource 9 [mem 0x000d4000-0x000d7fff] [ 2.711816] pci_bus 0000:04: resource 10 [mem 0x000d8000-0x000dbfff] [ 2.711817] pci_bus 0000:04: resource 11 [mem 0x000dc000-0x000dffff] [ 2.711818] pci_bus 0000:04: resource 12 [mem 0x000e0000-0x000e3fff] [ 2.711819] pci_bus 0000:04: resource 13 [mem 0x000e4000-0x000e7fff] [ 2.711820] pci_bus 0000:04: resource 14 [mem 0xc0000000-0xfeafffff] [ 2.711821] pci_bus 0000:04: resource 15 [mem 0xfed40000-0xfed44fff] [ 2.711953] NET: Registered protocol family 2 [ 2.712167] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 2.712379] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.712587] TCP: Hash tables configured (established 65536 bind 65536) [ 2.712606] TCP: reno registered [ 2.712623] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 2.712662] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 2.712770] NET: Registered protocol family 1 [ 2.712826] xen: registering gsi 22 triggering 0 polarity 1 [ 2.712834] xen: --> pirq=22 -> irq=22 (gsi=22) [ 2.712957] xen: registering gsi 20 triggering 0 polarity 1 [ 2.712962] xen: --> pirq=20 -> irq=20 (gsi=20) [ 2.713058] pci 0000:03:00.0: Boot video device [ 2.713065] PCI: CLS 64 bytes, default 64 [ 2.713096] Unpacking initramfs... [ 2.741784] Freeing initrd memory: 38816K (ffff880001ebc000 - ffff8800044a4000) [ 2.741859] Simple Boot Flag at 0x4f set to 0x1 [ 2.742356] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 2.742592] audit: initializing netlink socket (disabled) [ 2.742604] type=2000 audit(1400259597.735:1): initialized [ 2.752078] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.752379] VFS: Disk quotas dquot_6.5.2 [ 2.752402] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.752468] msgmni has been set to 14886 [ 2.752757] alg: No test for stdrng (krng) [ 2.752783] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.752827] io scheduler noop registered [ 2.752828] io scheduler deadline registered [ 2.752852] io scheduler cfq registered (default) [ 2.752966] xen: registering gsi 16 triggering 0 polarity 1 [ 2.752978] xen: --> pirq=16 -> irq=16 (gsi=16) [ 2.753204] xen: registering gsi 16 triggering 0 polarity 1 [ 2.753206] Already setup the GSI :16 [ 2.753389] xen: registering gsi 16 triggering 0 polarity 1 [ 2.753391] Already setup the GSI :16 [ 2.753576] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 2.753582] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 2.753608] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 2.753609] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 2.753615] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 2.753639] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 2.753641] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 2.753646] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 2.753653] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.753685] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 1c10 ss_vid 8086 ss_did 7270 [ 2.753727] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded [ 2.753730] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.753749] intel_idle: MWAIT substates: 0x1120 [ 2.753750] intel_idle: v0.4 model 0x3A [ 2.753750] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.753784] intel_idle: intel_idle yielding to none [ 2.753831] ERST: Error Record Serialization Table (ERST) support is initialized. [ 2.753837] pstore: Registered erst as persistent store backend [ 2.753976] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 2.754277] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.775095] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.795922] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.796263] hpet_acpi_add: no address or irqs in _CRS [ 2.796277] Linux agpgart interface v0.103 [ 2.796334] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 3.841270] i8042: No controller found [ 3.841475] mousedev: PS/2 mouse device common for all mice [ 3.841508] rtc_cmos 00:05: RTC can wake from S4 [ 3.841678] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 3.841731] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram [ 3.841739] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> [ 3.841740] AMD IOMMUv2 functionality not available on this system [ 3.841842] TCP: cubic registered [ 3.841985] NET: Registered protocol family 10 [ 3.842131] mip6: Mobile IPv6 [ 3.842133] NET: Registered protocol family 17 [ 3.842135] mpls_gso: MPLS GSO support [ 3.842326] registered taskstats version 1 [ 3.842815] rtc_cmos 00:05: setting system clock to 2014-05-16 16:59:58 UTC (1400259598) [ 3.842842] PM: Hibernation image not present or could not be loaded. [ 3.843133] Freeing unused kernel memory: 984K (ffffffff818af000 - ffffffff819a5000) [ 3.843134] Write protecting the kernel read-only data: 8192k [ 3.845040] Freeing unused kernel memory: 1324K (ffff8800014b5000 - ffff880001600000) [ 3.845192] Freeing unused kernel memory: 428K (ffff880001795000 - ffff880001800000) [ 3.860150] systemd-udevd[93]: starting version 204 [ 3.879347] pps_core: LinuxPPS API ver. 1 registered [ 3.879352] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 3.879663] PTP clock support registered [ 3.880980] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 3.880982] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 3.881086] xen: registering gsi 19 triggering 0 polarity 1 [ 3.881104] xen: --> pirq=19 -> irq=19 (gsi=19) [ 3.881300] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.883989] ACPI: bus type USB registered [ 3.884019] usbcore: registered new interface driver usbfs [ 3.884026] usbcore: registered new interface driver hub [ 3.884066] usbcore: registered new device driver usb [ 3.885148] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.885661] ehci-pci: EHCI PCI platform driver [ 3.894950] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.894955] ACPI: Thermal Zone [TZ00] (28 C) [ 3.895002] ACPI: Fan [FAN0] (off) [ 3.895044] ACPI: Fan [FAN1] (off) [ 3.895101] ACPI: Fan [FAN2] (off) [ 3.895147] ACPI: Fan [FAN3] (off) [ 3.895196] ACPI: Fan [FAN4] (off) [ 3.895562] thermal LNXTHERM:01: registered as thermal_zone1 [ 3.895565] ACPI: Thermal Zone [TZ01] (30 C) [ 3.901928] SCSI subsystem initialized [ 3.903236] libata version 3.00 loaded. [ 3.906061] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3.906064] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3.906163] xen: registering gsi 16 triggering 0 polarity 1 [ 3.906168] Already setup the GSI :16 [ 4.147945] e1000e 0000:00:19.0 eth0: registered PHC clock [ 4.147948] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:55:62:65 [ 4.147949] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 4.147983] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF [ 4.148071] xen: registering gsi 22 triggering 0 polarity 1 [ 4.148074] Already setup the GSI :22 [ 4.148087] xen: registering gsi 16 triggering 0 polarity 1 [ 4.148089] Already setup the GSI :16 [ 4.148122] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 4.148127] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 4.148178] ehci-pci 0000:00:1a.0: debug port 2 [ 4.148292] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.152133] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 4.152178] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc2560000 [ 4.160729] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 4.160767] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.160769] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.160770] usb usb1: Product: EHCI Host Controller [ 4.160771] usb usb1: Manufacturer: Linux 3.13-1-amd64 ehci_hcd [ 4.160772] usb usb1: SerialNumber: 0000:00:1a.0 [ 4.160921] hub 1-0:1.0: USB hub found [ 4.160927] hub 1-0:1.0: 2 ports detected [ 4.161030] xen: registering gsi 20 triggering 0 polarity 1 [ 4.161032] Already setup the GSI :20 [ 4.161056] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 4.161060] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 4.161078] ehci-pci 0000:00:1d.0: debug port 2 [ 4.165009] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 4.165045] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc2550000 [ 4.176764] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 4.176816] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.176818] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.176819] usb usb2: Product: EHCI Host Controller [ 4.176820] usb usb2: Manufacturer: Linux 3.13-1-amd64 ehci_hcd [ 4.176821] usb usb2: SerialNumber: 0000:00:1d.0 [ 4.176958] hub 2-0:1.0: USB hub found [ 4.176966] hub 2-0:1.0: 2 ports detected [ 4.177070] ahci 0000:00:1f.2: version 3.0 [ 4.177133] xen: registering gsi 21 triggering 0 polarity 1 [ 4.177141] xen: --> pirq=21 -> irq=21 (gsi=21) [ 4.192757] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 4.192760] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 4.197933] e1000 0000:04:00.0 eth1: (PCI:33MHz:32-bit) 00:0e:0c:7f:a5:ce [ 4.197935] e1000 0000:04:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 4.233140] scsi0 : ahci [ 4.233307] scsi1 : ahci [ 4.233377] scsi2 : ahci [ 4.233429] scsi3 : ahci [ 4.233479] scsi4 : ahci [ 4.233532] scsi5 : ahci [ 4.233560] ata1: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540100 irq 98 [ 4.233562] ata2: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540180 irq 98 [ 4.233565] ata3: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540200 irq 98 [ 4.233567] ata4: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540280 irq 98 [ 4.233570] ata5: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540300 irq 98 [ 4.233572] ata6: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540380 irq 98 [ 4.265764] e1000e 0000:02:00.0 eth2: registered PHC clock [ 4.265767] e1000e 0000:02:00.0 eth2: (PCI Express:2.5GT/s:Width x1) 00:1e:67:55:62:64 [ 4.265769] e1000e 0000:02:00.0 eth2: Intel(R) PRO/1000 Network Connection [ 4.265855] e1000e 0000:02:00.0 eth2: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 4.472818] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 4.552745] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.552771] ata5: SATA link down (SStatus 0 SControl 300) [ 4.552807] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.552823] ata6: SATA link down (SStatus 0 SControl 300) [ 4.554306] ata3.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 4.554308] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.554330] ata4.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 4.554332] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.555777] ata3.00: configured for UDMA/133 [ 4.555836] ata4.00: configured for UDMA/133 [ 4.560746] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.560767] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.562455] ata1.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 4.562458] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.562586] ata2.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 4.562588] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.564300] ata2.00: configured for UDMA/133 [ 4.564533] ata1.00: configured for UDMA/133 [ 4.564751] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 4.565045] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 4.565265] scsi 2:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 4.565388] scsi 3:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 4.570988] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.571005] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.571007] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.571025] sd 0:0:0:0: [sda] Write Protect is off [ 4.571027] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.571038] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.571044] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.571046] sd 2:0:0:0: [sdc] Write Protect is off [ 4.571048] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 4.571056] sd 1:0:0:0: [sdb] Write Protect is off [ 4.571059] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.571064] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.571090] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.571118] sd 3:0:0:0: [sdd] Write Protect is off [ 4.571121] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 4.571160] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.584099] sdc: sdc1 sdc2 sdc3 [ 4.584301] sd 2:0:0:0: [sdc] Attached SCSI disk [ 4.584725] sdd: sdd1 sdd2 sdd3 [ 4.584990] sdb: sdb1 sdb2 sdb3 [ 4.585006] sd 3:0:0:0: [sdd] Attached SCSI disk [ 4.585233] sd 1:0:0:0: [sdb] Attached SCSI disk [ 4.587856] sda: sda1 [ 4.587991] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.590039] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.590070] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 4.590097] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 4.590125] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 4.605088] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 4.605093] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.605348] hub 1-1:1.0: USB hub found [ 4.605461] hub 1-1:1.0: 6 ports detected [ 4.632661] random: nonblocking pool is initialized [ 4.716763] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 4.797427] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.849157] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 4.849162] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.849389] hub 2-1:1.0: USB hub found [ 4.849485] hub 2-1:1.0: 6 ports detected [ 4.920894] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 5.014600] usb 1-1.1: New USB device found, idVendor=046b, idProduct=ff10 [ 5.014603] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.014604] usb 1-1.1: Product: Virtual Keyboard and Mouse [ 5.014606] usb 1-1.1: Manufacturer: American Megatrends Inc. [ 5.014606] usb 1-1.1: SerialNumber: serial [ 5.120890] usb 2-1.4: new low-speed USB device number 3 using ehci-pci [ 5.218604] usb 2-1.4: New USB device found, idVendor=413c, idProduct=2107 [ 5.218608] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.218611] usb 2-1.4: Product: Dell USB Entry Keyboard [ 5.218613] usb 2-1.4: Manufacturer: DELL [ 5.604691] systemd-udevd[418]: starting version 204 [ 5.774782] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 5.774788] ACPI: Sleep Button [SLPB] [ 5.774824] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 5.774826] ACPI: Power Button [PWRF] [ 5.869647] systemd-udevd[469]: renamed network interface eth1 to rename3 [ 5.924836] systemd-udevd[459]: renamed network interface eth0 to rename2 [ 5.940328] systemd-udevd[469]: renamed network interface rename3 to eth0 [ 5.958614] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 5.958619] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.958622] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 5.958624] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.958625] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 5.958626] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.958627] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 5.958629] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SI_.SIOR 2 (20131115/utaddress-251) [ 5.958630] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.958631] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.985728] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 5.994604] systemd-udevd[459]: renamed network interface rename2 to eth1 [ 5.996020] xen: registering gsi 22 triggering 0 polarity 1 [ 5.996024] Already setup the GSI :22 [ 5.996034] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251) [ 5.996039] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.015557] Monitor-Mwait will be used to enter C-1 state [ 6.015580] Monitor-Mwait will be used to enter C-2 state [ 6.015598] Monitor-Mwait will be used to enter C-3 state [ 6.017824] Warning: Processor Platform Limit not supported. [ 6.143213] hidraw: raw HID events driver (C) Jiri Kosina [ 6.148198] usbcore: registered new interface driver usbhid [ 6.148200] usbhid: USB HID core driver [ 6.191002] iTCO_vendor_support: vendor-support=0 [ 6.191421] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 6.191443] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 6.234866] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input3 [ 6.234956] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.1/input0 [ 6.235047] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input4 [ 6.235131] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.1/input1 [ 6.235247] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5 [ 6.235327] hid-generic 0003:413C:2107.0003: input,hidraw2: USB HID v1.10 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:1d.0-1.4/input0 [ 6.291440] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 6.313430] alg: No test for crc32 (crc32-pclmul) [ 6.508184] intel_rapl: domain uncore energy ctr 0:0 not working, skip [ 6.922752] EXT4-fs (sda1): re-mounted. Opts: (null) [ 7.019174] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 7.252197] loop: module loaded [ 8.756649] xen:xen_evtchn: Event-channel device installed [ 8.808309] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.809100] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 8.809268] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [-- Attachment #3: Type: text/plain, Size: 126 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 24+ messages in thread
[parent not found: <fc.011fc823e66acc853b9aca005d0d88ff.e66acc88@estone.ca>]
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile [not found] ` <fc.011fc823e66acc853b9aca005d0d88ff.e66acc88@estone.ca> @ 2014-05-19 9:01 ` Ian Campbell [not found] ` <1400490091.32311.16.camel@kazak.uk.xensource.com> 1 sibling, 0 replies; 24+ messages in thread From: Ian Campbell @ 2014-05-19 9:01 UTC (permalink / raw) To: Mike Egglestone; +Cc: 748052, JBeulich, xen-devel On Fri, 2014-05-16 at 10:05 -0700, Mike Egglestone wrote: > Here's some more info: > > I went into the BIOS, Advanced Tab-->USB Configuration > and set the following: > > USB Controller [Enabled] > Legacy USB Support [Disabled] > Port 60/64 Emulation [Disabled] > > Make USB Devices Non-Bootable [Disasbled] > > Device Reset timeout [20 sec] > > > I then rebooted into xen4.3 kernel 3.13. > The keyboard does NOT work at the grub menu. > But 5 seconds pass and the system boots. > Once at the login console, then keyboard works! Interesting. Not having grub is hardly ideal though... What were the previous settings (the ones which worked for grub but not Xen)? Do these new settings work with native Linux? Given the change in behaviour my gut feeling is that either the Legacy USB Support option or the 60/64 emulation ones are the one which matters out of that set. Ian. ^ permalink raw reply [flat|nested] 24+ messages in thread
[parent not found: <1400490091.32311.16.camel@kazak.uk.xensource.com>]
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile [not found] ` <1400490091.32311.16.camel@kazak.uk.xensource.com> @ 2014-05-20 16:25 ` Mike Egglestone [not found] ` <fc.011fc823e66acdde3b9aca005d0d88ff.e66acde1@estone.ca> 1 sibling, 0 replies; 24+ messages in thread From: Mike Egglestone @ 2014-05-20 16:25 UTC (permalink / raw) To: 748052, xen-devel [-- Attachment #1.1: Type: text/plain, Size: 681 bytes --] Ian Campbell <ijc@hellion.org.uk> writes: #What were the previous settings (the ones which worked for grub but not #Xen)? Do these new settings work with native Linux? # #Given the change in behaviour my gut feeling is that either the Legacy #USB Support option or the 60/64 emulation ones are the one which matters #out of that set. The default and previous settings were everything enabled, which works normally under native linux. As long as "legacy" usb is turned on, the XEN 4.3 booted keyboard does not work. I've added iommu=debug to the XEN CMD Line under grub. Attached is the xl dmesg log and system dmesg. What else did I miss that could be useful info? Thanks, [-- Attachment #1.2: Type: text/html, Size: 3439 bytes --] [-- Attachment #2: dmesg.txt --] [-- Type: text/plain, Size: 61478 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Debian 3.13.10-1 (2014-04-15) [ 0.000000] Command line: placeholder root=UUID=24e080dd-79b1-444c-8a7d-36e54ed2f4ca ro quiet [ 0.000000] Freeing 9b-100 pfn range: 101 pages freed [ 0.000000] 1-1 mapping on 9b->100 [ 0.000000] Freeing ab9a7-bba28 pfn range: 65665 pages freed [ 0.000000] 1-1 mapping on ab9a7->bba28 [ 0.000000] Freeing bc483-bc5b9 pfn range: 310 pages freed [ 0.000000] 1-1 mapping on bc483->bc5b9 [ 0.000000] Freeing beadd-beaee pfn range: 17 pages freed [ 0.000000] 1-1 mapping on beadd->beaee [ 0.000000] Freeing bed27-befff pfn range: 728 pages freed [ 0.000000] 1-1 mapping on bed27->befff [ 0.000000] Freeing bf000-100000 pfn range: 266240 pages freed [ 0.000000] 1-1 mapping on bf000->100000 [ 0.000000] Released 333061 pages of unused memory [ 0.000000] Set 333061 page(s) to 1-1 mapping [ 0.000000] Populating 1dfa0a-230f0f pfn range: 333061 pages added [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x00000000ab9a6fff] usable [ 0.000000] Xen: [mem 0x00000000ab9a7000-0x00000000bba27fff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bba28000-0x00000000bc482fff] usable [ 0.000000] Xen: [mem 0x00000000bc483000-0x00000000bc5b8fff] reserved [ 0.000000] Xen: [mem 0x00000000bc5b9000-0x00000000beadcfff] usable [ 0.000000] Xen: [mem 0x00000000beadd000-0x00000000beaedfff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000bed26fff] usable [ 0.000000] Xen: [mem 0x00000000bed27000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000befff000-0x00000000beffffff] usable [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x000000023fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation S1200BTL/S1200BTL, BIOS S1200BT.86B.02.00.0041.120520121743 12/05/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x230c00000-0x230dfffff] [ 0.000000] [mem 0x230c00000-0x230dfffff] page 4k [ 0.000000] BRK [0x01ab9000, 0x01ab9fff] PGTABLE [ 0.000000] BRK [0x01aba000, 0x01abafff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x230000000-0x230bfffff] [ 0.000000] [mem 0x230000000-0x230bfffff] page 4k [ 0.000000] BRK [0x01abb000, 0x01abbfff] PGTABLE [ 0.000000] BRK [0x01abc000, 0x01abcfff] PGTABLE [ 0.000000] BRK [0x01abd000, 0x01abdfff] PGTABLE [ 0.000000] BRK [0x01abe000, 0x01abefff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x200000000-0x22fffffff] [ 0.000000] [mem 0x200000000-0x22fffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x00100000-0xab9a6fff] [ 0.000000] [mem 0x00100000-0xab9a6fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbba28000-0xbc482fff] [ 0.000000] [mem 0xbba28000-0xbc482fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbc5b9000-0xbeadcfff] [ 0.000000] [mem 0xbc5b9000-0xbeadcfff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbeaee000-0xbed26fff] [ 0.000000] [mem 0xbeaee000-0xbed26fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbefff000-0xbeffffff] [ 0.000000] [mem 0xbefff000-0xbeffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x230e00000-0x23fffffff] [ 0.000000] [mem 0x230e00000-0x23fffffff] page 4k [ 0.000000] RAMDISK: [mem 0x01ebc000-0x044a3fff] [ 0.000000] ACPI: RSDP 00000000000f0410 000024 (v02 INTEL) [ 0.000000] ACPI: XSDT 00000000beffde18 0000B4 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: FACP 00000000beffcd98 0000F4 (v04 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: DSDT 00000000befee018 00CE48 (v02 INTEL S1200BTL 00000000 INTL 20100331) [ 0.000000] ACPI: FACS 00000000beffdd40 000040 [ 0.000000] ACPI: APIC 00000000beffb018 000652 (v03 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: SPMI 00000000beffec98 000040 (v05 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: MCFG 00000000beffec18 00003C (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: WDDT 00000000beffef18 000040 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: HPET 00000000beffee98 000038 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: SSDT 00000000befeb018 0010A8 (v02 INTEL S1200BTL 00001000 INTL 20100331) [ 0.000000] ACPI: BOOT 00000000beffee18 000028 (v01 INTEL S1200BTL 06222004 INTL 20090903) [ 0.000000] ACPI: SSDT 00000000befe7698 0005E0 (v02 INTEL S1200BTL 00003000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000befe6018 000A92 (v02 INTEL S1200BTL 00003000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000befea598 00054D (v01 INTEL S1200BTL 00001000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000beffdb18 000069 (v01 INTEL S1200BTL 00001000 INTL 20100331) [ 0.000000] ACPI: SSDT 00000000befe9e18 00017B (v02 INTEL S1200BTL 00002000 INTL 20100331) [ 0.000000] ACPI: XMAR 00000000befe8f18 000078 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: HEST 00000000beffcf18 0000A8 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 00000000beffed98 000030 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 00000000befe8c98 000230 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 00000000beffc918 000130 (v01 INTEL S1200BTL 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff] [ 0.000000] NODE_DATA [mem 0x230f0a000-0x230f0efff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x23fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009afff] [ 0.000000] node 0: [mem 0x00100000-0xab9a6fff] [ 0.000000] node 0: [mem 0xbba28000-0xbc482fff] [ 0.000000] node 0: [mem 0xbc5b9000-0xbeadcfff] [ 0.000000] node 0: [mem 0xbeaee000-0xbed26fff] [ 0.000000] node 0: [mem 0xbefff000-0xbeffffff] [ 0.000000] node 0: [mem 0x100000000-0x23fffffff] [ 0.000000] On node 0 totalpages: 2026234 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3994 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9728 pages used for memmap [ 0.000000] DMA32 zone: 711520 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: X2APIC (apic_id[0x00] uid[0x00] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x01] uid[0x01] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x02] uid[0x02] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x03] uid[0x03] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x04] uid[0x04] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x05] uid[0x05] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x06] uid[0x06] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x07] uid[0x07] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x08] uid[0x08] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x09] uid[0x09] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0a] uid[0x0a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0b] uid[0x0b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0c] uid[0x0c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0d] uid[0x0d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0e] uid[0x0e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x0f] uid[0x0f] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x10] uid[0x10] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x11] uid[0x11] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x12] uid[0x12] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x13] uid[0x13] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x14] uid[0x14] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x15] uid[0x15] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x16] uid[0x16] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x17] uid[0x17] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x18] uid[0x18] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x19] uid[0x19] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1a] uid[0x1a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1b] uid[0x1b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1c] uid[0x1c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1d] uid[0x1d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1e] uid[0x1e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x1f] uid[0x1f] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x20] uid[0x20] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x21] uid[0x21] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x22] uid[0x22] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x23] uid[0x23] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x24] uid[0x24] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x25] uid[0x25] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x26] uid[0x26] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x27] uid[0x27] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x28] uid[0x28] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x29] uid[0x29] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2a] uid[0x2a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2b] uid[0x2b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2c] uid[0x2c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2d] uid[0x2d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2e] uid[0x2e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x2f] uid[0x2f] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x30] uid[0x30] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x31] uid[0x31] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x32] uid[0x32] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x33] uid[0x33] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x34] uid[0x34] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x35] uid[0x35] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x36] uid[0x36] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x37] uid[0x37] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x38] uid[0x38] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x39] uid[0x39] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3a] uid[0x3a] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3b] uid[0x3b] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3c] uid[0x3c] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3d] uid[0x3d] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3e] uid[0x3e] disabled) [ 0.000000] ACPI: X2APIC (apic_id[0x3f] uid[0x3f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x21] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x22] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x23] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x24] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x25] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x26] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x27] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x28] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x29] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x2f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x30] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x31] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x32] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x33] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x34] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x35] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x36] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x37] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x38] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x39] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x3f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 128 CPUs, 120 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xab9a7000-0xbba27fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc483000-0xbc5b8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbeadd000-0xbeaedfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbed27000-0xbeddffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbede0000-0xbefdffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbefe0000-0xbeffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed18fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed19000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.3.0 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:128 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880226800000 s85824 r8192 d20672 u131072 [ 0.000000] pcpu-alloc: s85824 r8192 d20672 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 000 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 [ 0.000000] pcpu-alloc: [0] 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 [ 0.000000] pcpu-alloc: [0] 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 [ 0.000000] pcpu-alloc: [0] 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 [ 0.000000] pcpu-alloc: [0] 064 065 066 067 068 069 070 071 072 073 074 075 076 077 078 079 [ 0.000000] pcpu-alloc: [0] 080 081 082 083 084 085 086 087 088 089 090 091 092 093 094 095 [ 0.000000] pcpu-alloc: [0] 096 097 098 099 100 101 102 103 104 105 106 107 108 109 110 111 [ 0.000000] pcpu-alloc: [0] 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 [ 1.965344] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1998509 [ 1.965345] Policy zone: Normal [ 1.965346] Kernel command line: placeholder root=UUID=24e080dd-79b1-444c-8a7d-36e54ed2f4ca ro quiet [ 1.965520] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 1.965553] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 1.994812] software IO TLB [mem 0x222800000-0x226800000] (64MB) mapped at [ffff880222800000-ffff8802267fffff] [ 2.024316] Memory: 7583304K/8104936K available (4811K kernel code, 693K rwdata, 1620K rodata, 984K init, 952K bss, 521632K reserved) [ 2.024370] Hierarchical RCU implementation. [ 2.024371] RCU dyntick-idle grace-period acceleration is enabled. [ 2.024372] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 2.024377] NR_IRQS:33024 nr_irqs:744 16 [ 2.024429] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 2.024430] xen: registering gsi 9 triggering 0 polarity 0 [ 2.024440] xen: --> pirq=9 -> irq=9 (gsi=9) [ 2.024459] xen: acpi sci 9 [ 2.024462] xen: --> pirq=1 -> irq=1 (gsi=1) [ 2.024464] xen: --> pirq=2 -> irq=2 (gsi=2) [ 2.024467] xen: --> pirq=3 -> irq=3 (gsi=3) [ 2.024468] xen: --> pirq=4 -> irq=4 (gsi=4) [ 2.024470] xen: --> pirq=5 -> irq=5 (gsi=5) [ 2.024471] xen: --> pirq=6 -> irq=6 (gsi=6) [ 2.024473] xen: --> pirq=7 -> irq=7 (gsi=7) [ 2.024475] xen: --> pirq=8 -> irq=8 (gsi=8) [ 2.024476] xen: --> pirq=10 -> irq=10 (gsi=10) [ 2.024478] xen: --> pirq=11 -> irq=11 (gsi=11) [ 2.024479] xen: --> pirq=12 -> irq=12 (gsi=12) [ 2.024481] xen: --> pirq=13 -> irq=13 (gsi=13) [ 2.024483] xen: --> pirq=14 -> irq=14 (gsi=14) [ 2.024484] xen: --> pirq=15 -> irq=15 (gsi=15) [ 2.032877] Console: colour VGA+ 80x25 [ 2.033104] console [tty0] enabled [ 2.033128] Xen: using vcpuop timer interface [ 2.033131] installing Xen timer for CPU 0 [ 2.033149] tsc: Detected 3292.630 MHz processor [ 2.033152] Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.26 BogoMIPS (lpj=13170520) [ 2.033154] pid_max: default: 32768 minimum: 301 [ 2.033171] Security Framework initialized [ 2.033174] AppArmor: AppArmor disabled by boot time parameter [ 2.033175] Yama: disabled by default; enable with sysctl kernel.yama.* [ 2.033962] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 2.036047] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 2.036910] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 2.036923] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 2.037104] Initializing cgroup subsys memory [ 2.037109] Initializing cgroup subsys devices [ 2.037110] Initializing cgroup subsys freezer [ 2.037112] Initializing cgroup subsys blkio [ 2.037113] Initializing cgroup subsys perf_event [ 2.037157] CPU: Physical Processor ID: 0 [ 2.037157] CPU: Processor Core ID: 0 [ 2.037445] mce: CPU supports 2 MCE banks [ 2.037458] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 2.037458] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 2.037458] tlb_flushall_shift: 2 [ 2.037530] Freeing SMP alternatives memory: 20K (ffffffff819a5000 - ffffffff819aa000) [ 2.038344] ACPI: Core revision 20131115 [ 2.042624] ACPI: All ACPI Tables successfully acquired [ 2.044920] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 2.045096] NMI watchdog: disabled (cpu0): hardware events not enabled [ 2.045153] installing Xen timer for CPU 1 [ 2.045685] installing Xen timer for CPU 2 [ 2.046212] installing Xen timer for CPU 3 [ 2.046731] installing Xen timer for CPU 4 [ 2.047247] installing Xen timer for CPU 5 [ 2.047738] installing Xen timer for CPU 6 [ 2.048218] installing Xen timer for CPU 7 [ 2.048621] x86: Booted up 1 node, 8 CPUs [ 2.048825] devtmpfs: initialized [ 2.050888] PM: Registering ACPI NVS region [mem 0xab9a7000-0xbba27fff] (268963840 bytes) [ 2.054281] PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 2.054452] xen:grant_table: Grant tables using version 2 layout [ 2.054462] Grant table initialized [ 2.054517] NET: Registered protocol family 16 [ 2.054651] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 2.054653] ACPI: bus type PCI registered [ 2.054654] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 2.054811] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 2.054813] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 2.063056] PCI: Using configuration type 1 for base access [ 2.063638] bio: create slab <bio-0> at 0 [ 2.063837] ACPI: Added _OSI(Module Device) [ 2.063839] ACPI: Added _OSI(Processor Device) [ 2.063839] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.063840] ACPI: Added _OSI(Processor Aggregator Device) [ 2.065896] ACPI: Executed 1 blocks of module-level executable AML code [ 2.090043] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 2.090633] ACPI: SSDT 00000000bedbb018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 2.090877] ACPI: Dynamic OEM Table Load: [ 2.090879] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 2.102384] ACPI: SSDT 00000000bedbca98 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 2.102646] ACPI: Dynamic OEM Table Load: [ 2.102648] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 2.114493] ACPI: SSDT 00000000bedbad98 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 2.114733] ACPI: Dynamic OEM Table Load: [ 2.114734] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 2.127453] ACPI: Interpreter enabled [ 2.127462] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 2.127468] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580) [ 2.127472] ACPI: (supports S0 S1 S3 S5) [ 2.127473] ACPI: Using IOAPIC for interrupt routing [ 2.127509] HEST: Table parsing has been initialized. [ 2.127512] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.127693] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 2.131855] ACPI: Power Resource [FN00] (off) [ 2.131906] ACPI: Power Resource [FN01] (off) [ 2.131964] ACPI: Power Resource [FN02] (off) [ 2.132015] ACPI: Power Resource [FN03] (off) [ 2.132063] ACPI: Power Resource [FN04] (off) [ 2.132464] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 2.132468] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 2.132757] acpi PNP0A08:00: _OSC: platform does not support [AER] [ 2.133074] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 2.133559] PCI host bridge to bus 0000:00 [ 2.133561] pci_bus 0000:00: root bus resource [bus 00-3e] [ 2.133563] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 2.133564] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 2.133565] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 2.133566] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff] [ 2.133567] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 2.133569] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 2.133570] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 2.133571] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 2.133572] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 2.133573] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 2.133574] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff] [ 2.133575] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 2.133586] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 [ 2.133774] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 2.133816] pci 0000:00:19.0: reg 0x10: [mem 0xc2500000-0xc251ffff] [ 2.133834] pci 0000:00:19.0: reg 0x14: [mem 0xc2570000-0xc2570fff] [ 2.133851] pci 0000:00:19.0: reg 0x18: [io 0x5040-0x505f] [ 2.134001] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 2.134050] pci 0000:00:19.0: System wakeup disabled by ACPI [ 2.134100] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 2.134140] pci 0000:00:1a.0: reg 0x10: [mem 0xc2560000-0xc25603ff] [ 2.134327] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.134386] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 2.134431] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 2.134604] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.134657] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 2.134711] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 2.134880] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 2.134936] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 2.134977] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400 [ 2.135149] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 2.135202] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 2.135253] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 2.135294] pci 0000:00:1d.0: reg 0x10: [mem 0xc2550000-0xc25503ff] [ 2.135480] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.135538] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 2.135578] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.135729] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 2.135767] pci 0000:00:1f.0: [8086:1c54] type 00 class 0x060100 [ 2.136037] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 2.136082] pci 0000:00:1f.2: reg 0x10: [io 0x5090-0x5097] [ 2.136100] pci 0000:00:1f.2: reg 0x14: [io 0x5080-0x5083] [ 2.136117] pci 0000:00:1f.2: reg 0x18: [io 0x5070-0x5077] [ 2.136133] pci 0000:00:1f.2: reg 0x1c: [io 0x5060-0x5063] [ 2.136150] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f] [ 2.136168] pci 0000:00:1f.2: reg 0x24: [mem 0xc2540000-0xc25407ff] [ 2.136284] pci 0000:00:1f.2: PME# supported from D3hot [ 2.136365] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 2.136397] pci 0000:00:1f.3: reg 0x10: [mem 0xc2530000-0xc25300ff 64bit] [ 2.136447] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f] [ 2.136646] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 2.136652] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 2.136658] pci 0000:00:1c.0: bridge window [mem 0xc1900000-0xc22fffff] [ 2.136668] pci 0000:00:1c.0: bridge window [mem 0xc2600000-0xc2ffffff 64bit pref] [ 2.136834] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 [ 2.136876] pci 0000:02:00.0: reg 0x10: [mem 0xc2400000-0xc241ffff] [ 2.136936] pci 0000:02:00.0: reg 0x18: [io 0x3000-0x301f] [ 2.136967] pci 0000:02:00.0: reg 0x1c: [mem 0xc2420000-0xc2423fff] [ 2.137227] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 2.137297] pci 0000:02:00.0: System wakeup disabled by ACPI [ 2.142895] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 2.142903] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 2.142908] pci 0000:00:1c.4: bridge window [mem 0xc2400000-0xc24fffff] [ 2.143066] pci 0000:03:00.0: [102b:0522] type 00 class 0x030000 [ 2.143100] pci 0000:03:00.0: reg 0x10: [mem 0xc0000000-0xc0ffffff] [ 2.143124] pci 0000:03:00.0: reg 0x14: [mem 0xc1810000-0xc1813fff] [ 2.143148] pci 0000:03:00.0: reg 0x18: [mem 0xc1000000-0xc17fffff] [ 2.143239] pci 0000:03:00.0: reg 0x30: [mem 0xc1800000-0xc180ffff pref] [ 2.143394] pci 0000:03:00.0: System wakeup disabled by ACPI [ 2.151027] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 2.151039] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc18fffff] [ 2.151131] pci 0000:04:00.0: [8086:100e] type 00 class 0x020000 [ 2.151168] pci 0000:04:00.0: reg 0x10: [mem 0xc2340000-0xc235ffff] [ 2.151186] pci 0000:04:00.0: reg 0x14: [mem 0xc2320000-0xc233ffff] [ 2.151204] pci 0000:04:00.0: reg 0x18: [io 0x2000-0x203f] [ 2.151269] pci 0000:04:00.0: reg 0x30: [mem 0xc2300000-0xc231ffff pref] [ 2.151357] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 2.151482] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 2.151488] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] [ 2.151494] pci 0000:00:1e.0: bridge window [mem 0xc2300000-0xc23fffff] [ 2.151502] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 2.151503] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 2.151504] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 2.151506] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode) [ 2.151507] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 2.151508] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 2.151509] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 2.151510] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 2.151511] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 2.151512] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 2.151514] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode) [ 2.151515] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) [ 2.151569] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 2.151957] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.151998] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.152037] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.152075] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.152114] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.152152] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10 11 12 14 15) [ 2.152190] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 2.152229] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.152456] ACPI: Enabled 7 GPEs in block 00 to 3F [ 2.152461] ACPI: \_SB_.PCI0: notify handler is installed [ 2.152495] Found 1 acpi root devices [ 2.152523] xen:balloon: Initialising balloon driver [ 2.153393] xen_balloon: Initialising balloon driver [ 2.153505] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 2.153507] vgaarb: loaded [ 2.153508] vgaarb: bridge control possible 0000:03:00.0 [ 2.153538] PCI: Using ACPI for IRQ routing [ 2.157814] PCI: pci_cache_line_size set to 64 bytes [ 2.157890] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 2.157892] e820: reserve RAM buffer [mem 0xab9a7000-0xabffffff] [ 2.157893] e820: reserve RAM buffer [mem 0xbc483000-0xbfffffff] [ 2.157894] e820: reserve RAM buffer [mem 0xbeadd000-0xbfffffff] [ 2.157895] e820: reserve RAM buffer [mem 0xbed27000-0xbfffffff] [ 2.157896] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff] [ 2.158015] Switched to clocksource xen [ 2.159146] pnp: PnP ACPI init [ 2.159152] ACPI: bus type PNP registered [ 2.159185] pnp 00:00: [dma 4] [ 2.159196] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 2.159209] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 2.159269] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 2.159276] xen: registering gsi 13 triggering 1 polarity 0 [ 2.159303] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 2.159330] system 00:04: [io 0x0680-0x069f] has been reserved [ 2.159332] system 00:04: [io 0xffff] has been reserved [ 2.159333] system 00:04: [io 0xffff] has been reserved [ 2.159334] system 00:04: [io 0xffff] has been reserved [ 2.159335] system 00:04: [io 0x0400-0x0453] could not be reserved [ 2.159337] system 00:04: [io 0x0458-0x047f] has been reserved [ 2.159338] system 00:04: [io 0x0500-0x057f] has been reserved [ 2.159340] system 00:04: [io 0x164e-0x164f] has been reserved [ 2.159341] system 00:04: [io 0x0900-0x090f] has been reserved [ 2.159342] system 00:04: [io 0x0295-0x0296] has been reserved [ 2.159344] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.159349] xen: registering gsi 8 triggering 1 polarity 0 [ 2.159373] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.159401] system 00:06: [io 0x0454-0x0457] has been reserved [ 2.159403] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 2.159560] xen: registering gsi 4 triggering 1 polarity 0 [ 2.159577] pnp 00:07: [dma 0 disabled] [ 2.159610] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.159738] xen: registering gsi 3 triggering 1 polarity 0 [ 2.159754] pnp 00:08: [dma 0 disabled] [ 2.159785] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.159916] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.159918] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 2.159919] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.159921] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.159922] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 2.159923] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.159925] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 2.159926] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 2.159927] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 2.159929] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 2.159930] system 00:09: [mem 0xc2590000-0xc2590fff] has been reserved [ 2.159931] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.160101] system 00:0a: [mem 0x00000000-0x0009cfff] could not be reserved [ 2.160103] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.160136] pnp: PnP ACPI: found 11 devices [ 2.160137] ACPI: bus type PNP unregistered [ 2.164978] PM-Timer failed consistency check (0xffffff) - aborting. [ 2.165041] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 2.165045] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 2.165054] pci 0000:00:1c.0: bridge window [mem 0xc1900000-0xc22fffff] [ 2.165059] pci 0000:00:1c.0: bridge window [mem 0xc2600000-0xc2ffffff 64bit pref] [ 2.165070] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 2.165074] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 2.165082] pci 0000:00:1c.4: bridge window [mem 0xc2400000-0xc24fffff] [ 2.165097] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 2.165105] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc18fffff] [ 2.165120] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 2.165122] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] [ 2.165130] pci 0000:00:1e.0: bridge window [mem 0xc2300000-0xc23fffff] [ 2.165145] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.165146] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.165148] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.165149] pci_bus 0000:00: resource 7 [mem 0x000cc000-0x000cffff] [ 2.165150] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000d3fff] [ 2.165151] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff] [ 2.165152] pci_bus 0000:00: resource 10 [mem 0x000d8000-0x000dbfff] [ 2.165153] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000dffff] [ 2.165154] pci_bus 0000:00: resource 12 [mem 0x000e0000-0x000e3fff] [ 2.165155] pci_bus 0000:00: resource 13 [mem 0x000e4000-0x000e7fff] [ 2.165156] pci_bus 0000:00: resource 14 [mem 0xc0000000-0xfeafffff] [ 2.165157] pci_bus 0000:00: resource 15 [mem 0xfed40000-0xfed44fff] [ 2.165158] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 2.165159] pci_bus 0000:01: resource 1 [mem 0xc1900000-0xc22fffff] [ 2.165161] pci_bus 0000:01: resource 2 [mem 0xc2600000-0xc2ffffff 64bit pref] [ 2.165162] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 2.165163] pci_bus 0000:02: resource 1 [mem 0xc2400000-0xc24fffff] [ 2.165164] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc18fffff] [ 2.165165] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 2.165166] pci_bus 0000:04: resource 1 [mem 0xc2300000-0xc23fffff] [ 2.165167] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 2.165168] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 2.165169] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 2.165170] pci_bus 0000:04: resource 7 [mem 0x000cc000-0x000cffff] [ 2.165171] pci_bus 0000:04: resource 8 [mem 0x000d0000-0x000d3fff] [ 2.165173] pci_bus 0000:04: resource 9 [mem 0x000d4000-0x000d7fff] [ 2.165174] pci_bus 0000:04: resource 10 [mem 0x000d8000-0x000dbfff] [ 2.165175] pci_bus 0000:04: resource 11 [mem 0x000dc000-0x000dffff] [ 2.165176] pci_bus 0000:04: resource 12 [mem 0x000e0000-0x000e3fff] [ 2.165177] pci_bus 0000:04: resource 13 [mem 0x000e4000-0x000e7fff] [ 2.165178] pci_bus 0000:04: resource 14 [mem 0xc0000000-0xfeafffff] [ 2.165179] pci_bus 0000:04: resource 15 [mem 0xfed40000-0xfed44fff] [ 2.165310] NET: Registered protocol family 2 [ 2.165523] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 2.165733] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.165939] TCP: Hash tables configured (established 65536 bind 65536) [ 2.165959] TCP: reno registered [ 2.165976] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 2.166015] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 2.166123] NET: Registered protocol family 1 [ 2.166181] xen: registering gsi 22 triggering 0 polarity 1 [ 2.166189] xen: --> pirq=22 -> irq=22 (gsi=22) [ 2.190208] xen: registering gsi 20 triggering 0 polarity 1 [ 2.190215] xen: --> pirq=20 -> irq=20 (gsi=20) [ 2.208168] pci 0000:03:00.0: Boot video device [ 2.208176] PCI: CLS 64 bytes, default 64 [ 2.208207] Unpacking initramfs... [ 2.236860] Freeing initrd memory: 38816K (ffff880001ebc000 - ffff8800044a4000) [ 2.236967] Simple Boot Flag at 0x4f set to 0x1 [ 2.237573] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 2.237828] audit: initializing netlink socket (disabled) [ 2.237841] type=2000 audit(1400602639.229:1): initialized [ 2.247508] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.247772] VFS: Disk quotas dquot_6.5.2 [ 2.247797] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.247860] msgmni has been set to 14886 [ 2.248112] alg: No test for stdrng (krng) [ 2.248137] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.248180] io scheduler noop registered [ 2.248181] io scheduler deadline registered [ 2.248204] io scheduler cfq registered (default) [ 2.248317] xen: registering gsi 16 triggering 0 polarity 1 [ 2.248329] xen: --> pirq=16 -> irq=16 (gsi=16) [ 2.248561] xen: registering gsi 16 triggering 0 polarity 1 [ 2.248562] Already setup the GSI :16 [ 2.248746] xen: registering gsi 16 triggering 0 polarity 1 [ 2.248747] Already setup the GSI :16 [ 2.248934] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 2.248941] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 2.248965] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 2.248967] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 2.248973] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 2.248996] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 2.248998] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 2.249004] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 2.249011] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.249042] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 1c10 ss_vid 8086 ss_did 7270 [ 2.249085] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded [ 2.249088] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.249108] intel_idle: MWAIT substates: 0x1120 [ 2.249109] intel_idle: v0.4 model 0x3A [ 2.249109] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.249143] intel_idle: intel_idle yielding to none [ 2.249192] ERST: Error Record Serialization Table (ERST) support is initialized. [ 2.249196] pstore: Registered erst as persistent store backend [ 2.249334] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 2.249622] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.270443] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.291266] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.291491] hpet_acpi_add: no address or irqs in _CRS [ 2.291504] Linux agpgart interface v0.103 [ 2.291561] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.808299] i8042: Can't read CTR while initializing i8042 [ 2.808379] i8042: probe of i8042 failed with error -5 [ 2.808572] mousedev: PS/2 mouse device common for all mice [ 2.808610] rtc_cmos 00:05: RTC can wake from S4 [ 2.808785] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.808837] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram [ 2.808845] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> [ 2.808846] AMD IOMMUv2 functionality not available on this system [ 2.808946] TCP: cubic registered [ 2.809059] NET: Registered protocol family 10 [ 2.809204] mip6: Mobile IPv6 [ 2.809206] NET: Registered protocol family 17 [ 2.809208] mpls_gso: MPLS GSO support [ 2.809397] registered taskstats version 1 [ 2.809875] rtc_cmos 00:05: setting system clock to 2014-05-20 16:17:19 UTC (1400602639) [ 2.809903] PM: Hibernation image not present or could not be loaded. [ 2.810204] Freeing unused kernel memory: 984K (ffffffff818af000 - ffffffff819a5000) [ 2.810205] Write protecting the kernel read-only data: 8192k [ 2.812105] Freeing unused kernel memory: 1324K (ffff8800014b5000 - ffff880001600000) [ 2.812256] Freeing unused kernel memory: 428K (ffff880001795000 - ffff880001800000) [ 2.827163] systemd-udevd[92]: starting version 204 [ 2.844560] pps_core: LinuxPPS API ver. 1 registered [ 2.844564] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 2.844816] PTP clock support registered [ 2.845876] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 2.845878] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 2.845999] xen: registering gsi 19 triggering 0 polarity 1 [ 2.846016] xen: --> pirq=19 -> irq=19 (gsi=19) [ 2.846207] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.850979] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.850982] ACPI: Thermal Zone [TZ00] (28 C) [ 2.851032] ACPI: bus type USB registered [ 2.851058] usbcore: registered new interface driver usbfs [ 2.851067] usbcore: registered new interface driver hub [ 2.851185] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.851187] ACPI: Thermal Zone [TZ01] (30 C) [ 2.851422] ACPI: Fan [FAN0] (off) [ 2.851465] ACPI: Fan [FAN1] (off) [ 2.851523] ACPI: Fan [FAN2] (off) [ 2.851567] ACPI: Fan [FAN3] (off) [ 2.851619] ACPI: Fan [FAN4] (off) [ 2.851674] usbcore: registered new device driver usb [ 2.852200] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.852403] ehci-pci: EHCI PCI platform driver [ 2.864787] SCSI subsystem initialized [ 2.865915] libata version 3.00 loaded. [ 2.866284] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 2.866286] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.866399] xen: registering gsi 16 triggering 0 polarity 1 [ 2.866403] Already setup the GSI :16 [ 3.113309] e1000e 0000:00:19.0 eth0: registered PHC clock [ 3.113312] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:55:62:65 [ 3.113313] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.113347] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF [ 3.113414] xen: registering gsi 16 triggering 0 polarity 1 [ 3.113417] Already setup the GSI :16 [ 3.113458] xen: registering gsi 22 triggering 0 polarity 1 [ 3.113461] Already setup the GSI :22 [ 3.113514] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.113518] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.113565] ehci-pci 0000:00:1a.0: debug port 2 [ 3.113623] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.117496] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 3.117540] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc2560000 [ 3.126103] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.126150] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.126151] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.126152] usb usb1: Product: EHCI Host Controller [ 3.126153] usb usb1: Manufacturer: Linux 3.13-1-amd64 ehci_hcd [ 3.126154] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.126249] hub 1-0:1.0: USB hub found [ 3.126255] hub 1-0:1.0: 2 ports detected [ 3.126355] xen: registering gsi 20 triggering 0 polarity 1 [ 3.126357] Already setup the GSI :20 [ 3.126382] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.126385] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.126403] ehci-pci 0000:00:1d.0: debug port 2 [ 3.131434] ehci-pci 0000:00:1d.0: can't setup: -110 [ 3.131513] ehci-pci 0000:00:1d.0: USB bus 2 deregistered [ 3.131558] ehci-pci 0000:00:1d.0: init 0000:00:1d.0 fail, -110 [ 3.131640] ehci-pci: probe of 0000:00:1d.0 failed with error -110 [ 3.131709] ahci 0000:00:1f.2: version 3.0 [ 3.131772] xen: registering gsi 21 triggering 0 polarity 1 [ 3.131782] xen: --> pirq=21 -> irq=21 (gsi=21) [ 3.146127] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 3.146132] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 3.159348] e1000 0000:04:00.0 eth1: (PCI:33MHz:32-bit) 00:0e:0c:7f:a5:ce [ 3.159351] e1000 0000:04:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 3.186483] scsi0 : ahci [ 3.186656] scsi1 : ahci [ 3.186747] scsi2 : ahci [ 3.186826] scsi3 : ahci [ 3.186878] scsi4 : ahci [ 3.186926] scsi5 : ahci [ 3.186951] ata1: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540100 irq 98 [ 3.186953] ata2: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540180 irq 98 [ 3.186956] ata3: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540200 irq 98 [ 3.186958] ata4: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540280 irq 98 [ 3.186960] ata5: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540300 irq 98 [ 3.186963] ata6: SATA max UDMA/133 abar m2048@0xc2540000 port 0xc2540380 irq 98 [ 3.227131] e1000e 0000:02:00.0 eth2: registered PHC clock [ 3.227134] e1000e 0000:02:00.0 eth2: (PCI Express:2.5GT/s:Width x1) 00:1e:67:55:62:64 [ 3.227135] e1000e 0000:02:00.0 eth2: Intel(R) PRO/1000 Network Connection [ 3.227220] e1000e 0000:02:00.0 eth2: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 3.438158] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.506113] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.506147] ata5: SATA link down (SStatus 0 SControl 300) [ 3.506168] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.506184] ata6: SATA link down (SStatus 0 SControl 300) [ 3.507672] ata3.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 3.507674] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.507697] ata4.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 3.507699] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.509425] ata4.00: configured for UDMA/133 [ 3.509632] ata3.00: configured for UDMA/133 [ 3.514096] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.514116] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.515796] ata1.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 3.515798] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.515911] ata2.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133 [ 3.515913] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.517632] ata2.00: configured for UDMA/133 [ 3.518061] ata1.00: configured for UDMA/133 [ 3.518225] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 3.518456] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 3.518616] scsi 2:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 3.518849] scsi 3:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5 [ 3.524457] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.524468] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.524480] sd 1:0:0:0: [sdb] Write Protect is off [ 3.524482] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.524492] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.524506] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.524527] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.524544] sd 0:0:0:0: [sda] Write Protect is off [ 3.524546] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.524568] sd 2:0:0:0: [sdc] Write Protect is off [ 3.524570] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.524585] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.524595] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.524640] sd 3:0:0:0: [sdd] Write Protect is off [ 3.524642] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.524682] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.533464] sdd: sdd1 sdd2 sdd3 [ 3.533532] sda: sda1 [ 3.533751] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.533765] sd 3:0:0:0: [sdd] Attached SCSI disk [ 3.537032] sdc: sdc1 sdc2 sdc3 [ 3.537338] sd 2:0:0:0: [sdc] Attached SCSI disk [ 3.537490] sdb: sdb1 sdb2 sdb3 [ 3.537682] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.539735] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.539774] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.539810] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.539846] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 3.570409] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.570414] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.570687] hub 1-1:1.0: USB hub found [ 3.570781] hub 1-1:1.0: 6 ports detected [ 3.608735] random: nonblocking pool is initialized [ 3.743107] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.842362] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 3.935896] usb 1-1.1: New USB device found, idVendor=046b, idProduct=ff10 [ 3.935900] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.935903] usb 1-1.1: Product: Virtual Keyboard and Mouse [ 3.935905] usb 1-1.1: Manufacturer: American Megatrends Inc. [ 3.935907] usb 1-1.1: SerialNumber: serial [ 4.550370] systemd-udevd[415]: starting version 204 [ 4.770201] systemd-udevd[456]: renamed network interface eth0 to rename2 [ 4.841681] xen: registering gsi 22 triggering 0 polarity 1 [ 4.841687] Already setup the GSI :22 [ 4.841696] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251) [ 4.841701] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.873050] input: PC Speaker as /devices/platform/pcspkr/input/input0 [ 4.895381] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 4.895386] ACPI: Sleep Button [SLPB] [ 4.895417] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 4.895419] ACPI: Power Button [PWRF] [ 5.022133] hidraw: raw HID events driver (C) Jiri Kosina [ 5.024742] usbcore: registered new interface driver usbhid [ 5.024743] usbhid: USB HID core driver [ 5.034262] Monitor-Mwait will be used to enter C-1 state [ 5.034279] Monitor-Mwait will be used to enter C-2 state [ 5.034293] Monitor-Mwait will be used to enter C-3 state [ 5.036031] Warning: Processor Platform Limit not supported. [ 5.055503] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input3 [ 5.055595] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.1/input0 [ 5.055707] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input4 [ 5.055812] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.1/input1 [ 5.070679] systemd-udevd[493]: renamed network interface eth1 to eth0 [ 5.070857] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 5.070862] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.070865] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 5.070867] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.070868] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 5.070870] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.070870] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 5.070872] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SI_.SIOR 2 (20131115/utaddress-251) [ 5.070874] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.070874] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.082671] systemd-udevd[456]: renamed network interface rename2 to eth1 [ 5.086706] iTCO_vendor_support: vendor-support=0 [ 5.087114] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 5.087137] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 5.103769] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 5.109352] alg: No test for crc32 (crc32-pclmul) [ 5.360267] intel_rapl: domain uncore energy ctr 0:0 not working, skip [ 5.826774] EXT4-fs (sda1): re-mounted. Opts: (null) [ 5.948423] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 6.173620] loop: module loaded [ 7.568692] xen:xen_evtchn: Event-channel device installed [ 7.620432] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.622445] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 7.622615] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [-- Attachment #3: xldmesg.txt --] [-- Type: text/plain, Size: 18179 bytes --] (XEN) Xen version 4.3.0 (Debian 4.3.0-3+b1) (buildd-binet@buildd.debian.org) (gcc (Debian 4.8.2-8) 4.8.2) debug=n Wed Dec 4 07:43:54 UTC 2013 (XEN) Bootloader: GRUB 2.00-22 (XEN) Command line: placeholder loglvl=all iommu=debug (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 4 MBR signatures (XEN) Found 4 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009bc00 (usable) (XEN) 000000000009bc00 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000ab9a7000 (usable) (XEN) 00000000ab9a7000 - 00000000bba28000 (ACPI NVS) (XEN) 00000000bba28000 - 00000000bc483000 (usable) (XEN) 00000000bc483000 - 00000000bc5b9000 (reserved) (XEN) 00000000bc5b9000 - 00000000beadd000 (usable) (XEN) 00000000beadd000 - 00000000beaee000 (reserved) (XEN) 00000000beaee000 - 00000000bed27000 (usable) (XEN) 00000000bed27000 - 00000000bede0000 (reserved) (XEN) 00000000bede0000 - 00000000befe0000 (ACPI NVS) (XEN) 00000000befe0000 - 00000000befff000 (ACPI data) (XEN) 00000000befff000 - 00000000bf000000 (usable) (XEN) 00000000bf000000 - 00000000c0000000 (reserved) (XEN) 00000000f8000000 - 00000000fc000000 (reserved) (XEN) 00000000fec00000 - 00000000fec01000 (reserved) (XEN) 00000000fed19000 - 00000000fed1a000 (reserved) (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffa00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000240000000 (usable) (XEN) ACPI: RSDP 000F0410, 0024 (r2 INTEL) (XEN) ACPI: XSDT BEFFDE18, 00B4 (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: FACP BEFFCD98, 00F4 (r4 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: DSDT BEFEE018, CE48 (r2 INTEL S1200BTL 0 INTL 20100331) (XEN) ACPI: FACS BEFFDD40, 0040 (XEN) ACPI: APIC BEFFB018, 0652 (r3 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: SPMI BEFFEC98, 0040 (r5 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: MCFG BEFFEC18, 003C (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: WDDT BEFFEF18, 0040 (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: HPET BEFFEE98, 0038 (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: SSDT BEFEB018, 10A8 (r2 INTEL S1200BTL 1000 INTL 20100331) (XEN) ACPI: BOOT BEFFEE18, 0028 (r1 INTEL S1200BTL 6222004 INTL 20090903) (XEN) ACPI: SSDT BEFE7698, 05E0 (r2 INTEL S1200BTL 3000 INTL 20100331) (XEN) ACPI: SSDT BEFE6018, 0A92 (r2 INTEL S1200BTL 3000 INTL 20100331) (XEN) ACPI: SSDT BEFEA598, 054D (r1 INTEL S1200BTL 1000 INTL 20100331) (XEN) ACPI: SSDT BEFFDB18, 0069 (r1 INTEL S1200BTL 1000 INTL 20100331) (XEN) ACPI: SSDT BEFE9E18, 017B (r2 INTEL S1200BTL 2000 INTL 20100331) (XEN) ACPI: DMAR BEFE8F18, 0078 (r1 INTEL S1200BTL 1 INTL 1) (XEN) ACPI: HEST BEFFCF18, 00A8 (r1 INTEL S1200BTL 1 INTL 1) (XEN) ACPI: BERT BEFFED98, 0030 (r1 INTEL S1200BTL 1 INTL 1) (XEN) ACPI: ERST BEFE8C98, 0230 (r1 INTEL S1200BTL 1 INTL 1) (XEN) ACPI: EINJ BEFFC918, 0130 (r1 INTEL S1200BTL 1 INTL 1) (XEN) System RAM: 7914MB (8104940kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000240000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000fc8e0 (XEN) DMI 2.6 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x408 (XEN) ACPI: SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0] (XEN) ACPI: 32/64X FACS address mismatch in FADT - beffdd40/0000000000000000, using 32 (XEN) ACPI: wakeup_vec[beffdd4c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) (XEN) Processor #2 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) (XEN) Processor #4 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) (XEN) Processor #6 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) (XEN) Processor #1 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) (XEN) Processor #3 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) (XEN) Processor #5 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) (XEN) Processor #7 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x21] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x22] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x23] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x24] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x25] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x26] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x27] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x28] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x29] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2a] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2b] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2c] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2d] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2e] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x2f] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x30] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x31] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x32] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x33] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x34] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x35] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x36] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x37] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x38] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x39] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3a] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3b] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3c] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3d] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3e] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x3f] lapic_id[0xff] disabled) (XEN) ACPI: X2APIC (apic_id[0x00] uid[0x00] disabled) (XEN) ACPI: X2APIC (apic_id[0x01] uid[0x01] disabled) (XEN) ACPI: X2APIC (apic_id[0x02] uid[0x02] disabled) (XEN) ACPI: X2APIC (apic_id[0x03] uid[0x03] disabled) (XEN) ACPI: X2APIC (apic_id[0x04] uid[0x04] disabled) (XEN) ACPI: X2APIC (apic_id[0x05] uid[0x05] disabled) (XEN) ACPI: X2APIC (apic_id[0x06] uid[0x06] disabled) (XEN) ACPI: X2APIC (apic_id[0x07] uid[0x07] disabled) (XEN) ACPI: X2APIC (apic_id[0x08] uid[0x08] disabled) (XEN) ACPI: X2APIC (apic_id[0x09] uid[0x09] disabled) (XEN) ACPI: X2APIC (apic_id[0x0a] uid[0x0a] disabled) (XEN) ACPI: X2APIC (apic_id[0x0b] uid[0x0b] disabled) (XEN) ACPI: X2APIC (apic_id[0x0c] uid[0x0c] disabled) (XEN) ACPI: X2APIC (apic_id[0x0d] uid[0x0d] disabled) (XEN) ACPI: X2APIC (apic_id[0x0e] uid[0x0e] disabled) (XEN) ACPI: X2APIC (apic_id[0x0f] uid[0x0f] disabled) (XEN) ACPI: X2APIC (apic_id[0x10] uid[0x10] disabled) (XEN) ACPI: X2APIC (apic_id[0x11] uid[0x11] disabled) (XEN) ACPI: X2APIC (apic_id[0x12] uid[0x12] disabled) (XEN) ACPI: X2APIC (apic_id[0x13] uid[0x13] disabled) (XEN) ACPI: X2APIC (apic_id[0x14] uid[0x14] disabled) (XEN) ACPI: X2APIC (apic_id[0x15] uid[0x15] disabled) (XEN) ACPI: X2APIC (apic_id[0x16] uid[0x16] disabled) (XEN) ACPI: X2APIC (apic_id[0x17] uid[0x17] disabled) (XEN) ACPI: X2APIC (apic_id[0x18] uid[0x18] disabled) (XEN) ACPI: X2APIC (apic_id[0x19] uid[0x19] disabled) (XEN) ACPI: X2APIC (apic_id[0x1a] uid[0x1a] disabled) (XEN) ACPI: X2APIC (apic_id[0x1b] uid[0x1b] disabled) (XEN) ACPI: X2APIC (apic_id[0x1c] uid[0x1c] disabled) (XEN) ACPI: X2APIC (apic_id[0x1d] uid[0x1d] disabled) (XEN) ACPI: X2APIC (apic_id[0x1e] uid[0x1e] disabled) (XEN) ACPI: X2APIC (apic_id[0x1f] uid[0x1f] disabled) (XEN) ACPI: X2APIC (apic_id[0x20] uid[0x20] disabled) (XEN) ACPI: X2APIC (apic_id[0x21] uid[0x21] disabled) (XEN) ACPI: X2APIC (apic_id[0x22] uid[0x22] disabled) (XEN) ACPI: X2APIC (apic_id[0x23] uid[0x23] disabled) (XEN) ACPI: X2APIC (apic_id[0x24] uid[0x24] disabled) (XEN) ACPI: X2APIC (apic_id[0x25] uid[0x25] disabled) (XEN) ACPI: X2APIC (apic_id[0x26] uid[0x26] disabled) (XEN) ACPI: X2APIC (apic_id[0x27] uid[0x27] disabled) (XEN) ACPI: X2APIC (apic_id[0x28] uid[0x28] disabled) (XEN) ACPI: X2APIC (apic_id[0x29] uid[0x29] disabled) (XEN) ACPI: X2APIC (apic_id[0x2a] uid[0x2a] disabled) (XEN) ACPI: X2APIC (apic_id[0x2b] uid[0x2b] disabled) (XEN) ACPI: X2APIC (apic_id[0x2c] uid[0x2c] disabled) (XEN) ACPI: X2APIC (apic_id[0x2d] uid[0x2d] disabled) (XEN) ACPI: X2APIC (apic_id[0x2e] uid[0x2e] disabled) (XEN) ACPI: X2APIC (apic_id[0x2f] uid[0x2f] disabled) (XEN) ACPI: X2APIC (apic_id[0x30] uid[0x30] disabled) (XEN) ACPI: X2APIC (apic_id[0x31] uid[0x31] disabled) (XEN) ACPI: X2APIC (apic_id[0x32] uid[0x32] disabled) (XEN) ACPI: X2APIC (apic_id[0x33] uid[0x33] disabled) (XEN) ACPI: X2APIC (apic_id[0x34] uid[0x34] disabled) (XEN) ACPI: X2APIC (apic_id[0x35] uid[0x35] disabled) (XEN) ACPI: X2APIC (apic_id[0x36] uid[0x36] disabled) (XEN) ACPI: X2APIC (apic_id[0x37] uid[0x37] disabled) (XEN) ACPI: X2APIC (apic_id[0x38] uid[0x38] disabled) (XEN) ACPI: X2APIC (apic_id[0x39] uid[0x39] disabled) (XEN) ACPI: X2APIC (apic_id[0x3a] uid[0x3a] disabled) (XEN) ACPI: X2APIC (apic_id[0x3b] uid[0x3b] disabled) (XEN) ACPI: X2APIC (apic_id[0x3c] uid[0x3c] disabled) (XEN) ACPI: X2APIC (apic_id[0x3d] uid[0x3d] disabled) (XEN) ACPI: X2APIC (apic_id[0x3e] uid[0x3e] disabled) (XEN) ACPI: X2APIC (apic_id[0x3f] uid[0x3f] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 (XEN) [VT-D]dmar.c:767: Host address width 36 (XEN) [VT-D]dmar.c:781: found ACPI_DMAR_DRHD: (XEN) [VT-D]dmar.c:461: dmaru->address = fed90000 (XEN) [VT-D]iommu.c:1158: drhd->address = fed90000 iommu->reg = ffff82c3ffd54000 (XEN) [VT-D]iommu.c:1160: cap = c9008020660262 ecap = f010da (XEN) [VT-D]dmar.c:396: IOAPIC: 0000:f0:1f.0 (XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.0 (XEN) [VT-D]dmar.c:475: flags: INCLUDE_ALL (XEN) [VT-D]dmar.c:786: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:382: endpoint: 0000:00:1d.0 (XEN) [VT-D]dmar.c:382: endpoint: 0000:00:1a.0 (XEN) [VT-D]dmar.c:655: RMRR region: base_addr bedbe000 end_address bedd1fff (XEN) Xen ERST support is initialized. (XEN) Using ACPI (MADT) for SMP configuration information (XEN) SMP: Allowing 128 CPUs (120 hotplug CPUs) (XEN) IRQ limits: 24 GSI, 1528 MSI/MSI-X (XEN) Switched to APIC driver x2apic_cluster. (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 3292.631 MHz processor. (XEN) Initing memory sharing. (XEN) xstate_init: using cntxt_size: 0x340 and states: 0x7 (XEN) mce_intel.c:717: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0 (XEN) Intel machine check reporting enabled (XEN) PCI: MCFG configuration 0: base f8000000 segment 0000 buses 00 - 3f (XEN) PCI: MCFG area at f8000000 reserved in E820 (XEN) PCI: Using MCFG for segment 0000 bus 00-3f (XEN) Intel VT-d iommu 0 supported page sizes: 4kB. (XEN) Intel VT-d Snoop Control enabled. (XEN) Intel VT-d Dom0 DMA Passthrough not enabled. (XEN) Intel VT-d Queued Invalidation enabled. (XEN) Intel VT-d Interrupt Remapping enabled. (XEN) Intel VT-d Shared EPT tables not enabled. (XEN) I/O virtualisation enabled (XEN) - Dom0 mode: Relaxed (XEN) Interrupt remapping enabled (XEN) Enabled directed EOI with ioapic_ack_old on! (XEN) ENABLING IO-APIC IRQs (XEN) -> Using old ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) TSC deadline timer enabled (XEN) Platform timer is 14.318MHz HPET (XEN) Allocated console ring of 64 KiB. (XEN) mwait-idle: MWAIT substates: 0x1120 (XEN) mwait-idle: v0.4 model 0x3a (XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) - Unrestricted Guest (XEN) HVM: ASIDs enabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging (HAP) detected (XEN) HVM: HAP page sizes: 4kB, 2MB (XEN) Brought up 8 CPUs (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) mtrr: your CPUs had inconsistent variable MTRR settings (XEN) mtrr: probably your BIOS does not setup all CPUs. (XEN) mtrr: corrected configuration. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1ebc000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000230000000->0000000234000000 (1938466 pages to be allocated) (XEN) Init. ramdisk: 000000023da18000->000000023ffffa00 (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81ebc000 (XEN) Init. ramdisk: ffffffff81ebc000->ffffffff844a3a00 (XEN) Phys-Mach map: ffffffff844a4000->ffffffff853a1050 (XEN) Start info: ffffffff853a2000->ffffffff853a24b4 (XEN) Page tables: ffffffff853a3000->ffffffff853d2000 (XEN) Boot stack: ffffffff853d2000->ffffffff853d3000 (XEN) TOTAL: ffffffff80000000->ffffffff85800000 (XEN) ENTRY ADDRESS: ffffffff818c41f0 (XEN) Dom0 has maximum 8 VCPUs (XEN) [VT-D]iommu.c:1453: d0:PCI: map 0000:00:00.0 (XEN) [VT-D]iommu.c:1453: d0:PCI: map 0000:00:19.0 (XEN) [VT-D]iommu.c:1453: d0:PCI: map 0000:00:1a.0 (XEN) [VT-D]iommu.c:1453: d0:PCI: map 0000:00:1d.0 (XEN) [VT-D]iommu.c:1453: d0:PCI: map 0000:00:1f.0 (XEN) [VT-D]iommu.c:1453: d0:PCI: map 0000:00:1f.2 (XEN) [VT-D]iommu.c:1453: d0:PCI: map 0000:00:1f.3 (XEN) [VT-D]iommu.c:1441: d0:PCIe: map 0000:02:00.0 (XEN) [VT-D]iommu.c:1441: d0:PCIe: map 0000:03:00.0 (XEN) [VT-D]iommu.c:1453: d0:PCI: map 0000:04:00.0 (XEN) [VT-D]iommu.c:755: iommu_enable_translation: iommu->reg = ffff82c3ffd54000 (XEN) Scrubbing Free RAM: .done. (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Std. Loglevel: All (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 260kB init memory. (XEN) PCI add device 0000:00:00.0 (XEN) PCI add device 0000:00:19.0 (XEN) PCI add device 0000:00:1a.0 (XEN) PCI add device 0000:00:1c.0 (XEN) PCI add device 0000:00:1c.4 (XEN) PCI add device 0000:00:1c.5 (XEN) PCI add device 0000:00:1d.0 (XEN) PCI add device 0000:00:1e.0 (XEN) PCI add device 0000:00:1f.0 (XEN) PCI add device 0000:00:1f.2 (XEN) PCI add device 0000:00:1f.3 (XEN) PCI add device 0000:02:00.0 (XEN) PCI add device 0000:03:00.0 (XEN) PCI add device 0000:04:00.0 (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from 0x000000000010005f to 0x000000000010005d. (XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa (XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa [-- Attachment #4: Type: text/plain, Size: 126 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 24+ messages in thread
[parent not found: <fc.011fc823e66acdde3b9aca005d0d88ff.e66acde1@estone.ca>]
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile [not found] ` <fc.011fc823e66acdde3b9aca005d0d88ff.e66acde1@estone.ca> @ 2014-05-21 8:32 ` Jan Beulich 2014-05-22 17:19 ` Mike Egglestone [not found] ` <fc.011fc823e66aced13b9aca005d0d88ff.e66aced4@estone.ca> 0 siblings, 2 replies; 24+ messages in thread From: Jan Beulich @ 2014-05-21 8:32 UTC (permalink / raw) To: Mike Egglestone; +Cc: 748052, xen-devel >>> On 20.05.14 at 18:25, <mike@estone.ca> wrote: > I've added iommu=debug to the XEN CMD Line under grub. > Attached is the xl dmesg log and system dmesg. Okay, this at least clarifies there is a (relatively big) RMRR. There is a change to the handling of these among the ones that'll become 4.3.3 - mind giving http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=6c63041428cc348bcb2887afabd606bc4bd5523f a try on top of your 4.3.2 (or trying the tip of the stable-4.3 branch)? > What else did I miss that could be useful info? At least the resolution of these addresses (XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa (XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa into (symbol,offset) pairs, so we can at least make a first guess at whether these are in any way related to your problem. Jan ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile 2014-05-21 8:32 ` Jan Beulich @ 2014-05-22 17:19 ` Mike Egglestone [not found] ` <fc.011fc823e66aced13b9aca005d0d88ff.e66aced4@estone.ca> 1 sibling, 0 replies; 24+ messages in thread From: Mike Egglestone @ 2014-05-22 17:19 UTC (permalink / raw) To: 748052, xen-devel [-- Attachment #1.1: Type: text/plain, Size: 2258 bytes --] "Jan Beulich" <JBeulich@suse.com> writes: #Okay, this at least clarifies there is a (relatively big) RMRR. There is #a change to the handling of these among the ones that'll become #4.3.3 - mind giving #http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=6c63041428cc348bcb2887afabd606bc4bd5523f #a try on top of your 4.3.2 (or trying the tip of the stable-4.3 branch)? # #> What else did I miss that could be useful info? # #At least the resolution of these addresses # #(XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa #(XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa # #into (symbol,offset) pairs, so we can at least make a first guess at #whether these are in any way related to your problem. Booted into xen compiled with xen-syms. Hope this is right. :) root@xen-3:~# xl dmesg |grep trap |grep GPF (XEN) traps.c:3061: GPF (0000): ffff82c4c0186ae1 -> ffff82c4c0218e3a (XEN) traps.c:3061: GPF (0000): ffff82c4c0186ae1 -> ffff82c4c0218e3a root@xen-3:~# gdb xen-4.3.0/xen/xen-syms GNU gdb (GDB) 7.6.2 (Debian 7.6.2-1.1) Copyright (C) 2013 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /root/xen-4.3.0/xen/xen-syms...done. (gdb) list *0xffff82c4c0186ae1 0xffff82c4c0186ae1 is in do_general_protection (traps.c:2597). 2592 case MSR_EFER: 2593 rdmsr_normal: 2594 /* Everyone can read the MSR space. */ 2595 /* gdprintk(XENLOG_WARNING,"Domain attempted RDMSR %p.\n", 2596 _p(regs->ecx));*/ 2597 if ( rdmsr_safe(regs->ecx, msr_content) ) 2598 goto fail; 2599 regs->eax = (uint32_t)msr_content; 2600 regs->edx = (uint32_t)(msr_content >> 32); 2601 break; (gdb) quit root@xen-3:~# I am a noob when working with source code. How do I bump my xen up to 4.3.3? Thanks, [-- Attachment #1.2: Type: text/html, Size: 11598 bytes --] [-- Attachment #2: Type: text/plain, Size: 126 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 24+ messages in thread
[parent not found: <fc.011fc823e66aced13b9aca005d0d88ff.e66aced4@estone.ca>]
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile [not found] ` <fc.011fc823e66aced13b9aca005d0d88ff.e66aced4@estone.ca> @ 2014-05-23 7:52 ` Jan Beulich [not found] ` <537F1A700200007800015391@mail.emea.novell.com> 1 sibling, 0 replies; 24+ messages in thread From: Jan Beulich @ 2014-05-23 7:52 UTC (permalink / raw) To: Mike Egglestone; +Cc: 748052, xen-devel >>> On 22.05.14 at 19:19, <mike@estone.ca> wrote: > "Jan Beulich" <JBeulich@suse.com> writes: > #Okay, this at least clarifies there is a (relatively big) RMRR. There is > #a change to the handling of these among the ones that'll become > #4.3.3 - mind giving > #http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=6c63041428cc348bcb2 > 887afabd606bc4bd5523f > #a try on top of your 4.3.2 (or trying the tip of the stable-4.3 branch)? > # > #> What else did I miss that could be useful info? > # > #At least the resolution of these addresses > # > #(XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa > #(XEN) traps.c:3061: GPF (0000): ffff82c4c0186a91 -> ffff82c4c0218daa > # > #into (symbol,offset) pairs, so we can at least make a first guess at > #whether these are in any way related to your problem. > > Booted into xen compiled with xen-syms. > Hope this is right. :) > > root@xen-3:~# xl dmesg |grep trap |grep GPF > (XEN) traps.c:3061: GPF (0000): ffff82c4c0186ae1 -> ffff82c4c0218e3a > (XEN) traps.c:3061: GPF (0000): ffff82c4c0186ae1 -> ffff82c4c0218e3a > root@xen-3:~# gdb xen-4.3.0/xen/xen-syms > GNU gdb (GDB) 7.6.2 (Debian 7.6.2-1.1) > Copyright (C) 2013 Free Software Foundation, Inc. > License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> > This is free software: you are free to change and redistribute it. > There is NO WARRANTY, to the extent permitted by law. Type "show copying" > and "show warranty" for details. > This GDB was configured as "x86_64-linux-gnu". > For bug reporting instructions, please see: > <http://www.gnu.org/software/gdb/bugs/>... > Reading symbols from /root/xen-4.3.0/xen/xen-syms...done. > (gdb) list *0xffff82c4c0186ae1 > 0xffff82c4c0186ae1 is in do_general_protection (traps.c:2597). > 2592 case MSR_EFER: > 2593 rdmsr_normal: > 2594 /* Everyone can read the MSR space. */ > 2595 /* gdprintk(XENLOG_WARNING,"Domain attempted RDMSR > %p.\n", > 2596 _p(regs->ecx));*/ > 2597 if ( rdmsr_safe(regs->ecx, msr_content) ) > 2598 goto fail; > 2599 regs->eax = (uint32_t)msr_content; > 2600 regs->edx = (uint32_t)(msr_content >> 32); > 2601 break; Thanks. We can then pretty much rule out a connection of these with the issue at hand. > I am a noob when working with source code. How do I bump my xen up to 4.3.3? I guess this http://wiki.xenproject.org/wiki/Compiling_Xen_From_Source should help you. Jan ^ permalink raw reply [flat|nested] 24+ messages in thread
[parent not found: <537F1A700200007800015391@mail.emea.novell.com>]
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile [not found] ` <537F1A700200007800015391@mail.emea.novell.com> @ 2014-05-23 9:21 ` Ian Campbell 2014-05-23 9:35 ` Jan Beulich ` (2 more replies) 0 siblings, 3 replies; 24+ messages in thread From: Ian Campbell @ 2014-05-23 9:21 UTC (permalink / raw) To: Jan Beulich; +Cc: 748052, Mike Egglestone, xen-devel On Fri, 2014-05-23 at 08:52 +0100, Jan Beulich wrote: > > I am a noob when working with source code. How do I bump my xen up to 4.3.3? > > I guess this > http://wiki.xenproject.org/wiki/Compiling_Xen_From_Source > should help you. Since this only needs a new hypervisor binary and not a full set of tools etc to reproduce I think it can be simplified to replacing the previous "apt-get source" with git clone -b staging-4.3 git://xenbits.xen.org/xen.git cd xen Then "make -C xen", install the xen.gz and boot it as you did previously. Ian ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile 2014-05-23 9:21 ` Ian Campbell @ 2014-05-23 9:35 ` Jan Beulich 2014-05-23 10:08 ` Ian Campbell 2014-05-23 18:53 ` Mike Egglestone 2014-05-23 20:00 ` Mike Egglestone 2 siblings, 1 reply; 24+ messages in thread From: Jan Beulich @ 2014-05-23 9:35 UTC (permalink / raw) To: Ian Campbell, Mike Egglestone; +Cc: 748052, xen-devel >>> On 23.05.14 at 11:21, <Ian.Campbell@citrix.com> wrote: > On Fri, 2014-05-23 at 08:52 +0100, Jan Beulich wrote: >> > I am a noob when working with source code. How do I bump my xen up to > 4.3.3? >> >> I guess this >> http://wiki.xenproject.org/wiki/Compiling_Xen_From_Source >> should help you. > > Since this only needs a new hypervisor binary and not a full set of > tools etc to reproduce I think it can be simplified to replacing the > previous "apt-get source" with > git clone -b staging-4.3 git://xenbits.xen.org/xen.git > cd xen > > Then "make -C xen", install the xen.gz and boot it as you did > previously. Right, I should have remembered to mention that. The above seems slightly incorrect in that you need to either "cd xen" or pass "-C xen" to make. Jan ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile 2014-05-23 9:35 ` Jan Beulich @ 2014-05-23 10:08 ` Ian Campbell 2014-05-23 10:14 ` Jan Beulich 0 siblings, 1 reply; 24+ messages in thread From: Ian Campbell @ 2014-05-23 10:08 UTC (permalink / raw) To: Jan Beulich; +Cc: 748052, Mike Egglestone, xen-devel On Fri, 2014-05-23 at 10:35 +0100, Jan Beulich wrote: > >>> On 23.05.14 at 11:21, <Ian.Campbell@citrix.com> wrote: > > On Fri, 2014-05-23 at 08:52 +0100, Jan Beulich wrote: > >> > I am a noob when working with source code. How do I bump my xen up to > > 4.3.3? > >> > >> I guess this > >> http://wiki.xenproject.org/wiki/Compiling_Xen_From_Source > >> should help you. > > > > Since this only needs a new hypervisor binary and not a full set of > > tools etc to reproduce I think it can be simplified to replacing the > > previous "apt-get source" with > > git clone -b staging-4.3 git://xenbits.xen.org/xen.git > > cd xen > > > > Then "make -C xen", install the xen.gz and boot it as you did > > previously. > > Right, I should have remembered to mention that. The above > seems slightly incorrect in that you need to either "cd xen" or pass > "-C xen" to make. The "cd xen" is to move into the cloned tree, the "-C xen" to to only build the hypervisor subtree of that directory, so both are needed. (IOW you could also make -C xen/xen) Ian. ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile 2014-05-23 10:08 ` Ian Campbell @ 2014-05-23 10:14 ` Jan Beulich 0 siblings, 0 replies; 24+ messages in thread From: Jan Beulich @ 2014-05-23 10:14 UTC (permalink / raw) To: Ian Campbell; +Cc: 748052, Mike Egglestone, xen-devel >>> On 23.05.14 at 12:08, <Ian.Campbell@citrix.com> wrote: > On Fri, 2014-05-23 at 10:35 +0100, Jan Beulich wrote: >> >>> On 23.05.14 at 11:21, <Ian.Campbell@citrix.com> wrote: >> > On Fri, 2014-05-23 at 08:52 +0100, Jan Beulich wrote: >> >> > I am a noob when working with source code. How do I bump my xen up to >> > 4.3.3? >> >> >> >> I guess this >> >> http://wiki.xenproject.org/wiki/Compiling_Xen_From_Source >> >> should help you. >> > >> > Since this only needs a new hypervisor binary and not a full set of >> > tools etc to reproduce I think it can be simplified to replacing the >> > previous "apt-get source" with >> > git clone -b staging-4.3 git://xenbits.xen.org/xen.git >> > cd xen >> > >> > Then "make -C xen", install the xen.gz and boot it as you did >> > previously. >> >> Right, I should have remembered to mention that. The above >> seems slightly incorrect in that you need to either "cd xen" or pass >> "-C xen" to make. > > The "cd xen" is to move into the cloned tree, the "-C xen" to to only > build the hypervisor subtree of that directory, so both are needed. Urgh - having hidden most of the "git clone"s I run in scripts, I keep forgetting that this clones into a subdirectory. Sorry for the noise. Jan ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile 2014-05-23 9:21 ` Ian Campbell 2014-05-23 9:35 ` Jan Beulich @ 2014-05-23 18:53 ` Mike Egglestone 2014-05-23 20:00 ` Mike Egglestone 2 siblings, 0 replies; 24+ messages in thread From: Mike Egglestone @ 2014-05-23 18:53 UTC (permalink / raw) To: 748052, xen-devel [-- Attachment #1.1: Type: text/plain, Size: 553 bytes --] Ian Campbell <Ian.Campbell@citrix.com> writes: #Since this only needs a new hypervisor binary and not a full set of #tools etc to reproduce I think it can be simplified to replacing the #previous "apt-get source" with # git clone -b staging-4.3 git://xenbits.xen.org/xen.git # cd xen # #Then "make -C xen", install the xen.gz and boot it as you did #previously. Did that, rebooted and still no keyboard. FWIW, I pulled the drive out and slapped it into a Dell Optiplex 7010 I have as a spare workstation, booted it and keyboard works. Cheers, Mike [-- Attachment #1.2: Type: text/html, Size: 3718 bytes --] [-- Attachment #2: Type: text/plain, Size: 126 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile 2014-05-23 9:21 ` Ian Campbell 2014-05-23 9:35 ` Jan Beulich 2014-05-23 18:53 ` Mike Egglestone @ 2014-05-23 20:00 ` Mike Egglestone 2 siblings, 0 replies; 24+ messages in thread From: Mike Egglestone @ 2014-05-23 20:00 UTC (permalink / raw) To: 748052, xen-devel [-- Attachment #1.1: Type: text/plain, Size: 1412 bytes --] Mike Egglestone writes: #Did that, rebooted and still no keyboard. # #FWIW, I pulled the drive out and slapped it into a Dell Optiplex 7010 I have as a spare #workstation, booted it and keyboard works. Further to this, I went back to stock everything. 3.13 kernel with debian's xen 4.3.0. Moved the internal USB connector to the other port on the motherboard. (This wire connects the 2 front USB connectors on the front panel of the chassis) and rebooted with the USB keyboard plugged into the front panel. Keyboard works! Moved the keyboard back to any of the 4 rear onboard USB ports, and keyboard does not work. Either of the 2 front side USB ports worked. Downed the server, moved the internal USB connector back to the first USB slot it was plugged into originally, plugged the keyboard into one of the 2 front panel usb ports and booted it up. Keyboard does not work. Keyboard works in all cases and ports at the grub prompt. (unless bios usb legacy is disabled) This is so strange. I found a server with an Intel S2600CP board in it, slapped the drive into that and booted into xen, keyboard works. (plugged into rear onboard usb ports) Either it's this particular model of Intel board(S1200BTL), or just this one board that I have. If I can find another S1200BTL board, I will try it, but I'm happy to close this bug and just blame the board, the BMC or the C204 chipset. :) Cheers, Mike [-- Attachment #1.2: Type: text/html, Size: 6184 bytes --] [-- Attachment #2: Type: text/plain, Size: 126 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile 2014-05-16 15:31 ` Ian Campbell 2014-05-16 15:51 ` Jan Beulich 2014-05-16 15:55 ` dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 failed with error -110" Jan Beulich @ 2014-05-21 17:44 ` Mike Egglestone [not found] ` <fc.011fc823e66ace343b9aca005d0d88ff.e66ace35@estone.ca> 3 siblings, 0 replies; 24+ messages in thread From: Mike Egglestone @ 2014-05-21 17:44 UTC (permalink / raw) To: ijc; +Cc: 748052, JBeulich, xen-devel [-- Attachment #1.1: Type: text/plain, Size: 663 bytes --] Ian Campbell <ijc@hellion.org.uk> writes: #Sadly I don't think the Debian packages currently retain these. # #Mike, the easiest way to gather these might be # apt-get source xen=<pkg-version> # cd xen-XXX # make -C xen # #Then boot with the resulting xen/xen.gz. Then xen/xen-syms is the symbol #file which Jan refers to. Forgive me as I'm not that familiar with source code. I've run apt-get source xen and downloaded the xen-4.3.0 code. I've run Make -C xen and it compiled fine. How now do I boot with the xen.gz? Also Jan mentioned that I could try one of the newer xen's. Should I patch this source code, or upgrade it first before booting it? Thanks, [-- Attachment #1.2: Type: text/html, Size: 4282 bytes --] [-- Attachment #2: Type: text/plain, Size: 126 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 24+ messages in thread
[parent not found: <fc.011fc823e66ace343b9aca005d0d88ff.e66ace35@estone.ca>]
* Re: dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile [not found] ` <fc.011fc823e66ace343b9aca005d0d88ff.e66ace35@estone.ca> @ 2014-05-21 18:42 ` Ian Campbell 0 siblings, 0 replies; 24+ messages in thread From: Ian Campbell @ 2014-05-21 18:42 UTC (permalink / raw) To: Mike Egglestone; +Cc: 748052, JBeulich, xen-devel On Wed, 2014-05-21 at 10:44 -0700, Mike Egglestone wrote: > I've run Make -C xen and it compiled fine. > How now do I boot with the xen.gz? Copy xen/xen.gz to /boot and add an entry to your grub config (/boot/grub/grub.cfg) which references it, you can just copy one of the existing Xen entries and change the path. > Also Jan mentioned that I could try one of the newer xen's. > Should I patch this source code, or upgrade it first before booting > it? Probably best/easiest to boot with something like what you are using already but built yourself first before starting to change things. So I'd suggest starting with the xen.gz which you've just built. Ian. ^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2014-05-23 20:00 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20140513155528.2659.84403.reportbug@xen-3>
[not found] ` <1400084844.26934.6.camel@kazak.uk.xensource.com>
[not found] ` <fc.011fc823e66acb533b9aca005d0d88ff.e66acb56@estone.ca>
[not found] ` <1400148065.4386.11.camel@kazak.uk.xensource.com>
[not found] ` <1400149218.4386.24.camel@kazak.uk.xensource.com>
[not found] ` <fc.011fc823e66acbd03b9aca005d0d88ff.e66acbd5@estone.ca>
2014-05-16 8:58 ` dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 failed with error -110" Ian Campbell
2014-05-16 10:08 ` Jan Beulich
2014-05-16 10:14 ` Andrew Cooper
2014-05-16 14:48 ` Ross Philipson
2014-05-16 15:18 ` Jan Beulich
2014-05-16 15:31 ` Ian Campbell
2014-05-16 15:51 ` Jan Beulich
2014-05-16 16:04 ` dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile Mike Egglestone
[not found] ` <fc.011fc823e66acc6f3b9aca005d0d88ff.e66acc76@estone.ca>
2014-05-19 10:56 ` Jan Beulich
2014-05-16 15:55 ` dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 failed with error -110" Jan Beulich
2014-05-16 17:05 ` dom0 USB failing with "ehci-pci: probe of 0000:00:1d.0 faile Mike Egglestone
[not found] ` <fc.011fc823e66acc853b9aca005d0d88ff.e66acc88@estone.ca>
2014-05-19 9:01 ` Ian Campbell
[not found] ` <1400490091.32311.16.camel@kazak.uk.xensource.com>
2014-05-20 16:25 ` Mike Egglestone
[not found] ` <fc.011fc823e66acdde3b9aca005d0d88ff.e66acde1@estone.ca>
2014-05-21 8:32 ` Jan Beulich
2014-05-22 17:19 ` Mike Egglestone
[not found] ` <fc.011fc823e66aced13b9aca005d0d88ff.e66aced4@estone.ca>
2014-05-23 7:52 ` Jan Beulich
[not found] ` <537F1A700200007800015391@mail.emea.novell.com>
2014-05-23 9:21 ` Ian Campbell
2014-05-23 9:35 ` Jan Beulich
2014-05-23 10:08 ` Ian Campbell
2014-05-23 10:14 ` Jan Beulich
2014-05-23 18:53 ` Mike Egglestone
2014-05-23 20:00 ` Mike Egglestone
2014-05-21 17:44 ` Mike Egglestone
[not found] ` <fc.011fc823e66ace343b9aca005d0d88ff.e66ace35@estone.ca>
2014-05-21 18:42 ` Ian Campbell
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).