* Re: [Xen-users] nestedhvm. [not found] ` <537AD1A0.50702@netvel.net> @ 2014-05-20 8:56 ` Ian Campbell 2014-05-20 12:47 ` Alvin Starr 2014-05-20 16:37 ` Tim Deegan 0 siblings, 2 replies; 9+ messages in thread From: Ian Campbell @ 2014-05-20 8:56 UTC (permalink / raw) To: Alvin Starr, xen-devel; +Cc: Tim Deegan, Andres Lagar-Cavilla, xen-users Adding xen-devel and some relevant maintainers. > On 05/19/2014 11:40 AM, Ian Campbell wrote: > > On Sun, 2014-05-18 at 08:02 -0400, Alvin Starr wrote: > >> I am trying to run nested hypervisors to do some openstack experiments. > >> I seem to be able to run xen-on-xen with no problems but if i try to run > >> kvm-on-xen the system seems to spontaneously reboot. > >> I get the same results with xen 4.3 or 4.4. > >> The dom0 is running fedora-20 > >> The experiment environment is Centos6 with RDO On Mon, 2014-05-19 at 23:53 -0400, Alvin Starr wrote: > Here is the serial port output. > boot log along with panic. Which contains: (XEN) mm locking order violation: 260 > 222 (XEN) Xen BUG at mm-locks.h:118 (full stack trace is below) That lead me to http://lists.xen.org/archives/html/xen-devel/2013-02/msg01372.html but not to a patch. Was there one? I've grepped the git logs for hints but not found it... Ian. (XEN) ----[ Xen-4.3.2 x86_64 debug=n Not tainted ]---- (XEN) CPU: 23 (XEN) RIP: e008:[<ffff82c4c01ec7bb>] p2m_flush_table+0x1db/0x1f0 (XEN) RFLAGS: 0000000000010286 CONTEXT: hypervisor (XEN) rax: ffff8308299ed020 rbx: ffff831835cb0540 rcx: 0000000000000000 (XEN) rdx: ffff8308299e0000 rsi: 000000000000000a rdi: ffff82c4c027d658 (XEN) rbp: ffff82c4c031b648 rsp: ffff8308299e7998 r8: 0000000000000004 (XEN) r9: 0000000000000000 r10: ffff82c4c022ce64 r11: 0000000000000003 (XEN) r12: ffff83202cf99000 r13: 0000000000000000 r14: 0000000000000009 (XEN) r15: 0000000000000000 cr0: 0000000080050033 cr4: 00000000000406f0 (XEN) cr3: 0000001834178000 cr2: 0000000000000000 (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008 (XEN) Xen stack trace from rsp=ffff8308299e7998: (XEN) 0000000000000008 ffff83202cf99000 0000000000000006 0000000000000000 (XEN) 0000000000000009 ffff82c4c01f0431 0000000000000000 ffff831835cb0010 (XEN) 0000000000371600 ffff82c4c01f1dc5 2000000000000000 00000000016e8400 (XEN) ffff831836e38c58 ffff8308299e7a08 0000000001836e38 ffff831836e38000 (XEN) 0000000000000000 0000000000000000 0000000000000000 ffff831835cb0010 (XEN) 00000000000ee200 0000000000000000 0000000000000200 ffff831835cb0010 (XEN) 0000000000000001 0000000000371600 0000000000000200 ffff82c4c01ecf50 (XEN) ffff83202cf99000 0000000700000006 0000000001836e37 ffff831835cb0010 (XEN) ffff83202cf99000 ffff8308299e7af0 0000000000000200 0000000000371600 (XEN) 00000000016e8400 ffff82c4c01f3c8f ffff8308299e7aec 0000000035cb0010 (XEN) 0000000000000001 00000000016e8400 0000000000000200 ffff82c400000007 (XEN) ffff83202cf99000 0000000700000000 ffff83040e4402c4 ffff831835cb0010 (XEN) 0000000000000009 0000000000f9f600 00000000000ee200 0000000000000200 (XEN) ffff83202cf99000 ffff82c4c01f6019 00000000000ee200 ffff830800000200 (XEN) ffff831835cb04f8 ffff8308299e7f18 0000000000000003 ffff8308299e7c68 (XEN) 0000000000000010 ffff82c4c01bcf83 ffff8308299e7ba0 ffff82c4c01f1222 (XEN) 6000001800000000 ffffffff810402c4 ffff8308299e7c50 ffff8300aebdd000 (XEN) ffff8308299e7c50 ffff8300aebdd000 0000000000000000 ffff82c4c01c85dc (XEN) ffffffff81039e63 0a9b00100000000f 00000000ffffffff 0000000000000000 (XEN) 00000000ffffffff 0000000000000000 00000000ffffffff ffff831835cb0010 (XEN) Xen call trace: (XEN) [<ffff82c4c01ec7bb>] p2m_flush_table+0x1db/0x1f0 (XEN) [<ffff82c4c01f0431>] p2m_flush_nestedp2m+0x21/0x30 (XEN) [<ffff82c4c01f1dc5>] p2m_set_entry+0x565/0x650 (XEN) [<ffff82c4c01ecf50>] set_p2m_entry+0x90/0x130 (XEN) [<ffff82c4c01f3c8f>] p2m_pod_zero_check_superpage+0x21f/0x460 (XEN) [<ffff82c4c01f6019>] p2m_pod_demand_populate+0x699/0x890 (XEN) [<ffff82c4c01bcf83>] hvm_emulate_one+0xc3/0x1f0 (XEN) [<ffff82c4c01f1222>] p2m_gfn_to_mfn+0x392/0x3c0 (XEN) [<ffff82c4c01c85dc>] handle_mmio+0x7c/0x1e0 (XEN) [<ffff82c4c01f10e1>] p2m_gfn_to_mfn+0x251/0x3c0 (XEN) [<ffff82c4c01eca58>] __get_gfn_type_access+0x68/0x210 (XEN) [<ffff82c4c01c1843>] hvm_hap_nested_page_fault+0xc3/0x510 (XEN) [<ffff82c4c011a447>] csched_vcpu_wake+0x367/0x580 > >> > >> Any hints on what the problem may be or a good place to start to look to > >> diagnose it? > > You'll need to gather some logs I think. Ideally a serial console log or > > if not try using "noreboot" on your hypervisor command line to try and > > see the last messages before it reboots. > > > > Ian. > > > > > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xen-users] nestedhvm. 2014-05-20 8:56 ` [Xen-users] nestedhvm Ian Campbell @ 2014-05-20 12:47 ` Alvin Starr 2014-05-20 16:37 ` Tim Deegan 1 sibling, 0 replies; 9+ messages in thread From: Alvin Starr @ 2014-05-20 12:47 UTC (permalink / raw) To: Ian Campbell, xen-devel; +Cc: Tim Deegan, Andres Lagar-Cavilla, xen-users Not sure if it helps or not but the nested domUs have vcpus = 3 each. On 05/20/2014 04:56 AM, Ian Campbell wrote: > Adding xen-devel and some relevant maintainers. > >> On 05/19/2014 11:40 AM, Ian Campbell wrote: >>> On Sun, 2014-05-18 at 08:02 -0400, Alvin Starr wrote: >>>> I am trying to run nested hypervisors to do some openstack experiments. >>>> I seem to be able to run xen-on-xen with no problems but if i try to run >>>> kvm-on-xen the system seems to spontaneously reboot. >>>> I get the same results with xen 4.3 or 4.4. >>>> The dom0 is running fedora-20 >>>> The experiment environment is Centos6 with RDO > On Mon, 2014-05-19 at 23:53 -0400, Alvin Starr wrote: >> Here is the serial port output. >> boot log along with panic. > Which contains: > (XEN) mm locking order violation: 260 > 222 > (XEN) Xen BUG at mm-locks.h:118 > (full stack trace is below) > > That lead me to > http://lists.xen.org/archives/html/xen-devel/2013-02/msg01372.html but > not to a patch. Was there one? I've grepped the git logs for hints but > not found it... > > Ian. > > (XEN) ----[ Xen-4.3.2 x86_64 debug=n Not tainted ]---- > (XEN) CPU: 23 > (XEN) RIP: e008:[<ffff82c4c01ec7bb>] p2m_flush_table+0x1db/0x1f0 > (XEN) RFLAGS: 0000000000010286 CONTEXT: hypervisor > (XEN) rax: ffff8308299ed020 rbx: ffff831835cb0540 rcx: 0000000000000000 > (XEN) rdx: ffff8308299e0000 rsi: 000000000000000a rdi: ffff82c4c027d658 > (XEN) rbp: ffff82c4c031b648 rsp: ffff8308299e7998 r8: 0000000000000004 > (XEN) r9: 0000000000000000 r10: ffff82c4c022ce64 r11: 0000000000000003 > (XEN) r12: ffff83202cf99000 r13: 0000000000000000 r14: 0000000000000009 > (XEN) r15: 0000000000000000 cr0: 0000000080050033 cr4: 00000000000406f0 > (XEN) cr3: 0000001834178000 cr2: 0000000000000000 > (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008 > (XEN) Xen stack trace from rsp=ffff8308299e7998: > (XEN) 0000000000000008 ffff83202cf99000 0000000000000006 0000000000000000 > (XEN) 0000000000000009 ffff82c4c01f0431 0000000000000000 ffff831835cb0010 > (XEN) 0000000000371600 ffff82c4c01f1dc5 2000000000000000 00000000016e8400 > (XEN) ffff831836e38c58 ffff8308299e7a08 0000000001836e38 ffff831836e38000 > (XEN) 0000000000000000 0000000000000000 0000000000000000 ffff831835cb0010 > (XEN) 00000000000ee200 0000000000000000 0000000000000200 ffff831835cb0010 > (XEN) 0000000000000001 0000000000371600 0000000000000200 ffff82c4c01ecf50 > (XEN) ffff83202cf99000 0000000700000006 0000000001836e37 ffff831835cb0010 > (XEN) ffff83202cf99000 ffff8308299e7af0 0000000000000200 0000000000371600 > (XEN) 00000000016e8400 ffff82c4c01f3c8f ffff8308299e7aec 0000000035cb0010 > (XEN) 0000000000000001 00000000016e8400 0000000000000200 ffff82c400000007 > (XEN) ffff83202cf99000 0000000700000000 ffff83040e4402c4 ffff831835cb0010 > (XEN) 0000000000000009 0000000000f9f600 00000000000ee200 0000000000000200 > (XEN) ffff83202cf99000 ffff82c4c01f6019 00000000000ee200 ffff830800000200 > (XEN) ffff831835cb04f8 ffff8308299e7f18 0000000000000003 ffff8308299e7c68 > (XEN) 0000000000000010 ffff82c4c01bcf83 ffff8308299e7ba0 ffff82c4c01f1222 > (XEN) 6000001800000000 ffffffff810402c4 ffff8308299e7c50 ffff8300aebdd000 > (XEN) ffff8308299e7c50 ffff8300aebdd000 0000000000000000 ffff82c4c01c85dc > (XEN) ffffffff81039e63 0a9b00100000000f 00000000ffffffff 0000000000000000 > (XEN) 00000000ffffffff 0000000000000000 00000000ffffffff ffff831835cb0010 > (XEN) Xen call trace: > (XEN) [<ffff82c4c01ec7bb>] p2m_flush_table+0x1db/0x1f0 > (XEN) [<ffff82c4c01f0431>] p2m_flush_nestedp2m+0x21/0x30 > (XEN) [<ffff82c4c01f1dc5>] p2m_set_entry+0x565/0x650 > (XEN) [<ffff82c4c01ecf50>] set_p2m_entry+0x90/0x130 > (XEN) [<ffff82c4c01f3c8f>] p2m_pod_zero_check_superpage+0x21f/0x460 > (XEN) [<ffff82c4c01f6019>] p2m_pod_demand_populate+0x699/0x890 > (XEN) [<ffff82c4c01bcf83>] hvm_emulate_one+0xc3/0x1f0 > (XEN) [<ffff82c4c01f1222>] p2m_gfn_to_mfn+0x392/0x3c0 > (XEN) [<ffff82c4c01c85dc>] handle_mmio+0x7c/0x1e0 > (XEN) [<ffff82c4c01f10e1>] p2m_gfn_to_mfn+0x251/0x3c0 > (XEN) [<ffff82c4c01eca58>] __get_gfn_type_access+0x68/0x210 > (XEN) [<ffff82c4c01c1843>] hvm_hap_nested_page_fault+0xc3/0x510 > (XEN) [<ffff82c4c011a447>] csched_vcpu_wake+0x367/0x580 > >>>> Any hints on what the problem may be or a good place to start to look to >>>> diagnose it? >>> You'll need to gather some logs I think. Ideally a serial console log or >>> if not try using "noreboot" on your hypervisor command line to try and >>> see the last messages before it reboots. >>> >>> Ian. >>> >>> >> > -- Alvin Starr || voice: (905)513-7688 Netvel Inc. || Cell: (416)806-0133 alvin@netvel.net || ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xen-users] nestedhvm. 2014-05-20 8:56 ` [Xen-users] nestedhvm Ian Campbell 2014-05-20 12:47 ` Alvin Starr @ 2014-05-20 16:37 ` Tim Deegan 2014-05-20 16:59 ` Andres Lagar-Cavilla 1 sibling, 1 reply; 9+ messages in thread From: Tim Deegan @ 2014-05-20 16:37 UTC (permalink / raw) To: Ian Campbell; +Cc: xen-users, Alvin Starr, Andres Lagar-Cavilla, xen-devel At 09:56 +0100 on 20 May (1400576182), Ian Campbell wrote: > Adding xen-devel and some relevant maintainers. > > > On 05/19/2014 11:40 AM, Ian Campbell wrote: > > > On Sun, 2014-05-18 at 08:02 -0400, Alvin Starr wrote: > > >> I am trying to run nested hypervisors to do some openstack experiments. > > >> I seem to be able to run xen-on-xen with no problems but if i try to run > > >> kvm-on-xen the system seems to spontaneously reboot. > > > >> I get the same results with xen 4.3 or 4.4. > > >> The dom0 is running fedora-20 > > >> The experiment environment is Centos6 with RDO > > On Mon, 2014-05-19 at 23:53 -0400, Alvin Starr wrote: > > Here is the serial port output. > > boot log along with panic. > > Which contains: > (XEN) mm locking order violation: 260 > 222 > (XEN) Xen BUG at mm-locks.h:118 > (full stack trace is below) > > That lead me to > http://lists.xen.org/archives/html/xen-devel/2013-02/msg01372.html but > not to a patch. Was there one? I've grepped the git logs for hints but > not found it... I don't believe there was, no. I'm not convinced that making shadow code do locked p2m lookups is the right answer, anyway, though I suppose it would stop this particular crash. In the meantime, at least it suggests a workaround, which is to boot the KVM VM with max-mem == memory (or however Openstack expresses that). Tim. > (XEN) ----[ Xen-4.3.2 x86_64 debug=n Not tainted ]---- > (XEN) CPU: 23 > (XEN) RIP: e008:[<ffff82c4c01ec7bb>] p2m_flush_table+0x1db/0x1f0 > (XEN) RFLAGS: 0000000000010286 CONTEXT: hypervisor > (XEN) rax: ffff8308299ed020 rbx: ffff831835cb0540 rcx: 0000000000000000 > (XEN) rdx: ffff8308299e0000 rsi: 000000000000000a rdi: ffff82c4c027d658 > (XEN) rbp: ffff82c4c031b648 rsp: ffff8308299e7998 r8: 0000000000000004 > (XEN) r9: 0000000000000000 r10: ffff82c4c022ce64 r11: 0000000000000003 > (XEN) r12: ffff83202cf99000 r13: 0000000000000000 r14: 0000000000000009 > (XEN) r15: 0000000000000000 cr0: 0000000080050033 cr4: 00000000000406f0 > (XEN) cr3: 0000001834178000 cr2: 0000000000000000 > (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008 > (XEN) Xen stack trace from rsp=ffff8308299e7998: > (XEN) 0000000000000008 ffff83202cf99000 0000000000000006 0000000000000000 > (XEN) 0000000000000009 ffff82c4c01f0431 0000000000000000 ffff831835cb0010 > (XEN) 0000000000371600 ffff82c4c01f1dc5 2000000000000000 00000000016e8400 > (XEN) ffff831836e38c58 ffff8308299e7a08 0000000001836e38 ffff831836e38000 > (XEN) 0000000000000000 0000000000000000 0000000000000000 ffff831835cb0010 > (XEN) 00000000000ee200 0000000000000000 0000000000000200 ffff831835cb0010 > (XEN) 0000000000000001 0000000000371600 0000000000000200 ffff82c4c01ecf50 > (XEN) ffff83202cf99000 0000000700000006 0000000001836e37 ffff831835cb0010 > (XEN) ffff83202cf99000 ffff8308299e7af0 0000000000000200 0000000000371600 > (XEN) 00000000016e8400 ffff82c4c01f3c8f ffff8308299e7aec 0000000035cb0010 > (XEN) 0000000000000001 00000000016e8400 0000000000000200 ffff82c400000007 > (XEN) ffff83202cf99000 0000000700000000 ffff83040e4402c4 ffff831835cb0010 > (XEN) 0000000000000009 0000000000f9f600 00000000000ee200 0000000000000200 > (XEN) ffff83202cf99000 ffff82c4c01f6019 00000000000ee200 ffff830800000200 > (XEN) ffff831835cb04f8 ffff8308299e7f18 0000000000000003 ffff8308299e7c68 > (XEN) 0000000000000010 ffff82c4c01bcf83 ffff8308299e7ba0 ffff82c4c01f1222 > (XEN) 6000001800000000 ffffffff810402c4 ffff8308299e7c50 ffff8300aebdd000 > (XEN) ffff8308299e7c50 ffff8300aebdd000 0000000000000000 ffff82c4c01c85dc > (XEN) ffffffff81039e63 0a9b00100000000f 00000000ffffffff 0000000000000000 > (XEN) 00000000ffffffff 0000000000000000 00000000ffffffff ffff831835cb0010 > (XEN) Xen call trace: > (XEN) [<ffff82c4c01ec7bb>] p2m_flush_table+0x1db/0x1f0 > (XEN) [<ffff82c4c01f0431>] p2m_flush_nestedp2m+0x21/0x30 > (XEN) [<ffff82c4c01f1dc5>] p2m_set_entry+0x565/0x650 > (XEN) [<ffff82c4c01ecf50>] set_p2m_entry+0x90/0x130 > (XEN) [<ffff82c4c01f3c8f>] p2m_pod_zero_check_superpage+0x21f/0x460 > (XEN) [<ffff82c4c01f6019>] p2m_pod_demand_populate+0x699/0x890 > (XEN) [<ffff82c4c01bcf83>] hvm_emulate_one+0xc3/0x1f0 > (XEN) [<ffff82c4c01f1222>] p2m_gfn_to_mfn+0x392/0x3c0 > (XEN) [<ffff82c4c01c85dc>] handle_mmio+0x7c/0x1e0 > (XEN) [<ffff82c4c01f10e1>] p2m_gfn_to_mfn+0x251/0x3c0 > (XEN) [<ffff82c4c01eca58>] __get_gfn_type_access+0x68/0x210 > (XEN) [<ffff82c4c01c1843>] hvm_hap_nested_page_fault+0xc3/0x510 > (XEN) [<ffff82c4c011a447>] csched_vcpu_wake+0x367/0x580 > > > >> > > >> Any hints on what the problem may be or a good place to start to look to > > >> diagnose it? > > > You'll need to gather some logs I think. Ideally a serial console log or > > > if not try using "noreboot" on your hypervisor command line to try and > > > see the last messages before it reboots. > > > > > > Ian. > > > > > > > > > > > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xen-users] nestedhvm. 2014-05-20 16:37 ` Tim Deegan @ 2014-05-20 16:59 ` Andres Lagar-Cavilla 2014-05-20 17:32 ` Alvin Starr ` (2 more replies) 0 siblings, 3 replies; 9+ messages in thread From: Andres Lagar-Cavilla @ 2014-05-20 16:59 UTC (permalink / raw) To: Tim Deegan Cc: xen-users, Alvin Starr, Ian Campbell, Andres Lagar-Cavilla, xen-devel On May 20, 2014, at 12:37 PM, Tim Deegan <tim@xen.org> wrote: > At 09:56 +0100 on 20 May (1400576182), Ian Campbell wrote: >> Adding xen-devel and some relevant maintainers. >> >>> On 05/19/2014 11:40 AM, Ian Campbell wrote: >>>> On Sun, 2014-05-18 at 08:02 -0400, Alvin Starr wrote: >>>>> I am trying to run nested hypervisors to do some openstack experiments. >>>>> I seem to be able to run xen-on-xen with no problems but if i try to run >>>>> kvm-on-xen the system seems to spontaneously reboot. >> >>>>> I get the same results with xen 4.3 or 4.4. >>>>> The dom0 is running fedora-20 >>>>> The experiment environment is Centos6 with RDO >> >> On Mon, 2014-05-19 at 23:53 -0400, Alvin Starr wrote: >>> Here is the serial port output. >>> boot log along with panic. >> >> Which contains: >> (XEN) mm locking order violation: 260 > 222 >> (XEN) Xen BUG at mm-locks.h:118 >> (full stack trace is below) >> >> That lead me to >> http://lists.xen.org/archives/html/xen-devel/2013-02/msg01372.html but >> not to a patch. Was there one? I've grepped the git logs for hints but >> not found it... > > I don't believe there was, no. I'm not convinced that making shadow > code do locked p2m lookups is the right answer, anyway, though I > suppose it would stop this particular crash. > > In the meantime, at least it suggests a workaround, which is to boot > the KVM VM with max-mem == memory (or however Openstack expresses that). The problem arises from the use of PoD in L1 in combination with nested. L1 being the first level VM which runs the nested hypervisor. PoD being populate on demand covering the gap between maxmem and real memory. It might be that you need a small tweak to nova.conf. Kinda curious as to how you got to run openstack with new Xen, since a lot of production I've seen uses traditional xenserver. A different topic though. Andres > > Tim. > >> (XEN) ----[ Xen-4.3.2 x86_64 debug=n Not tainted ]---- >> (XEN) CPU: 23 >> (XEN) RIP: e008:[<ffff82c4c01ec7bb>] p2m_flush_table+0x1db/0x1f0 >> (XEN) RFLAGS: 0000000000010286 CONTEXT: hypervisor >> (XEN) rax: ffff8308299ed020 rbx: ffff831835cb0540 rcx: 0000000000000000 >> (XEN) rdx: ffff8308299e0000 rsi: 000000000000000a rdi: ffff82c4c027d658 >> (XEN) rbp: ffff82c4c031b648 rsp: ffff8308299e7998 r8: 0000000000000004 >> (XEN) r9: 0000000000000000 r10: ffff82c4c022ce64 r11: 0000000000000003 >> (XEN) r12: ffff83202cf99000 r13: 0000000000000000 r14: 0000000000000009 >> (XEN) r15: 0000000000000000 cr0: 0000000080050033 cr4: 00000000000406f0 >> (XEN) cr3: 0000001834178000 cr2: 0000000000000000 >> (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008 >> (XEN) Xen stack trace from rsp=ffff8308299e7998: >> (XEN) 0000000000000008 ffff83202cf99000 0000000000000006 0000000000000000 >> (XEN) 0000000000000009 ffff82c4c01f0431 0000000000000000 ffff831835cb0010 >> (XEN) 0000000000371600 ffff82c4c01f1dc5 2000000000000000 00000000016e8400 >> (XEN) ffff831836e38c58 ffff8308299e7a08 0000000001836e38 ffff831836e38000 >> (XEN) 0000000000000000 0000000000000000 0000000000000000 ffff831835cb0010 >> (XEN) 00000000000ee200 0000000000000000 0000000000000200 ffff831835cb0010 >> (XEN) 0000000000000001 0000000000371600 0000000000000200 ffff82c4c01ecf50 >> (XEN) ffff83202cf99000 0000000700000006 0000000001836e37 ffff831835cb0010 >> (XEN) ffff83202cf99000 ffff8308299e7af0 0000000000000200 0000000000371600 >> (XEN) 00000000016e8400 ffff82c4c01f3c8f ffff8308299e7aec 0000000035cb0010 >> (XEN) 0000000000000001 00000000016e8400 0000000000000200 ffff82c400000007 >> (XEN) ffff83202cf99000 0000000700000000 ffff83040e4402c4 ffff831835cb0010 >> (XEN) 0000000000000009 0000000000f9f600 00000000000ee200 0000000000000200 >> (XEN) ffff83202cf99000 ffff82c4c01f6019 00000000000ee200 ffff830800000200 >> (XEN) ffff831835cb04f8 ffff8308299e7f18 0000000000000003 ffff8308299e7c68 >> (XEN) 0000000000000010 ffff82c4c01bcf83 ffff8308299e7ba0 ffff82c4c01f1222 >> (XEN) 6000001800000000 ffffffff810402c4 ffff8308299e7c50 ffff8300aebdd000 >> (XEN) ffff8308299e7c50 ffff8300aebdd000 0000000000000000 ffff82c4c01c85dc >> (XEN) ffffffff81039e63 0a9b00100000000f 00000000ffffffff 0000000000000000 >> (XEN) 00000000ffffffff 0000000000000000 00000000ffffffff ffff831835cb0010 >> (XEN) Xen call trace: >> (XEN) [<ffff82c4c01ec7bb>] p2m_flush_table+0x1db/0x1f0 >> (XEN) [<ffff82c4c01f0431>] p2m_flush_nestedp2m+0x21/0x30 >> (XEN) [<ffff82c4c01f1dc5>] p2m_set_entry+0x565/0x650 >> (XEN) [<ffff82c4c01ecf50>] set_p2m_entry+0x90/0x130 >> (XEN) [<ffff82c4c01f3c8f>] p2m_pod_zero_check_superpage+0x21f/0x460 >> (XEN) [<ffff82c4c01f6019>] p2m_pod_demand_populate+0x699/0x890 >> (XEN) [<ffff82c4c01bcf83>] hvm_emulate_one+0xc3/0x1f0 >> (XEN) [<ffff82c4c01f1222>] p2m_gfn_to_mfn+0x392/0x3c0 >> (XEN) [<ffff82c4c01c85dc>] handle_mmio+0x7c/0x1e0 >> (XEN) [<ffff82c4c01f10e1>] p2m_gfn_to_mfn+0x251/0x3c0 >> (XEN) [<ffff82c4c01eca58>] __get_gfn_type_access+0x68/0x210 >> (XEN) [<ffff82c4c01c1843>] hvm_hap_nested_page_fault+0xc3/0x510 >> (XEN) [<ffff82c4c011a447>] csched_vcpu_wake+0x367/0x580 >> >>>>> >>>>> Any hints on what the problem may be or a good place to start to look to >>>>> diagnose it? >>>> You'll need to gather some logs I think. Ideally a serial console log or >>>> if not try using "noreboot" on your hypervisor command line to try and >>>> see the last messages before it reboots. >>>> >>>> Ian. >>>> >>>> >>> >>> >> >> ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xen-users] nestedhvm. 2014-05-20 16:59 ` Andres Lagar-Cavilla @ 2014-05-20 17:32 ` Alvin Starr 2014-05-21 2:05 ` Alvin Starr 2014-05-21 9:09 ` Ian Campbell 2 siblings, 0 replies; 9+ messages in thread From: Alvin Starr @ 2014-05-20 17:32 UTC (permalink / raw) To: Andres Lagar-Cavilla, Tim Deegan Cc: xen-users, Ian Campbell, Andres Lagar-Cavilla, xen-devel I have not gotten as far as running xen directly from openstack. That is still a desire and I hope to work towards that. Right now I am booting these with xl. I will try to set the mem to max=mem and see what happens. On 05/20/2014 12:59 PM, Andres Lagar-Cavilla wrote: > On May 20, 2014, at 12:37 PM, Tim Deegan <tim@xen.org> wrote: > >> At 09:56 +0100 on 20 May (1400576182), Ian Campbell wrote: >>> Adding xen-devel and some relevant maintainers. >>> >>>> On 05/19/2014 11:40 AM, Ian Campbell wrote: >>>>> On Sun, 2014-05-18 at 08:02 -0400, Alvin Starr wrote: >>>>>> I am trying to run nested hypervisors to do some openstack experiments. >>>>>> I seem to be able to run xen-on-xen with no problems but if i try to run >>>>>> kvm-on-xen the system seems to spontaneously reboot. >>>>>> I get the same results with xen 4.3 or 4.4. >>>>>> The dom0 is running fedora-20 >>>>>> The experiment environment is Centos6 with RDO >>> On Mon, 2014-05-19 at 23:53 -0400, Alvin Starr wrote: >>>> Here is the serial port output. >>>> boot log along with panic. >>> Which contains: >>> (XEN) mm locking order violation: 260 > 222 >>> (XEN) Xen BUG at mm-locks.h:118 >>> (full stack trace is below) >>> >>> That lead me to >>> http://lists.xen.org/archives/html/xen-devel/2013-02/msg01372.html but >>> not to a patch. Was there one? I've grepped the git logs for hints but >>> not found it... >> I don't believe there was, no. I'm not convinced that making shadow >> code do locked p2m lookups is the right answer, anyway, though I >> suppose it would stop this particular crash. >> >> In the meantime, at least it suggests a workaround, which is to boot >> the KVM VM with max-mem == memory (or however Openstack expresses that). > The problem arises from the use of PoD in L1 in combination with nested. L1 being the first level VM which runs the nested hypervisor. PoD being populate on demand covering the gap between maxmem and real memory. > > It might be that you need a small tweak to nova.conf. Kinda curious as to how you got to run openstack with new Xen, since a lot of production I've seen uses traditional xenserver. A different topic though. > > Andres >> Tim. >> >>> (XEN) ----[ Xen-4.3.2 x86_64 debug=n Not tainted ]---- >>> (XEN) CPU: 23 >>> (XEN) RIP: e008:[<ffff82c4c01ec7bb>] p2m_flush_table+0x1db/0x1f0 >>> (XEN) RFLAGS: 0000000000010286 CONTEXT: hypervisor >>> (XEN) rax: ffff8308299ed020 rbx: ffff831835cb0540 rcx: 0000000000000000 >>> (XEN) rdx: ffff8308299e0000 rsi: 000000000000000a rdi: ffff82c4c027d658 >>> (XEN) rbp: ffff82c4c031b648 rsp: ffff8308299e7998 r8: 0000000000000004 >>> (XEN) r9: 0000000000000000 r10: ffff82c4c022ce64 r11: 0000000000000003 >>> (XEN) r12: ffff83202cf99000 r13: 0000000000000000 r14: 0000000000000009 >>> (XEN) r15: 0000000000000000 cr0: 0000000080050033 cr4: 00000000000406f0 >>> (XEN) cr3: 0000001834178000 cr2: 0000000000000000 >>> (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008 >>> (XEN) Xen stack trace from rsp=ffff8308299e7998: >>> (XEN) 0000000000000008 ffff83202cf99000 0000000000000006 0000000000000000 >>> (XEN) 0000000000000009 ffff82c4c01f0431 0000000000000000 ffff831835cb0010 >>> (XEN) 0000000000371600 ffff82c4c01f1dc5 2000000000000000 00000000016e8400 >>> (XEN) ffff831836e38c58 ffff8308299e7a08 0000000001836e38 ffff831836e38000 >>> (XEN) 0000000000000000 0000000000000000 0000000000000000 ffff831835cb0010 >>> (XEN) 00000000000ee200 0000000000000000 0000000000000200 ffff831835cb0010 >>> (XEN) 0000000000000001 0000000000371600 0000000000000200 ffff82c4c01ecf50 >>> (XEN) ffff83202cf99000 0000000700000006 0000000001836e37 ffff831835cb0010 >>> (XEN) ffff83202cf99000 ffff8308299e7af0 0000000000000200 0000000000371600 >>> (XEN) 00000000016e8400 ffff82c4c01f3c8f ffff8308299e7aec 0000000035cb0010 >>> (XEN) 0000000000000001 00000000016e8400 0000000000000200 ffff82c400000007 >>> (XEN) ffff83202cf99000 0000000700000000 ffff83040e4402c4 ffff831835cb0010 >>> (XEN) 0000000000000009 0000000000f9f600 00000000000ee200 0000000000000200 >>> (XEN) ffff83202cf99000 ffff82c4c01f6019 00000000000ee200 ffff830800000200 >>> (XEN) ffff831835cb04f8 ffff8308299e7f18 0000000000000003 ffff8308299e7c68 >>> (XEN) 0000000000000010 ffff82c4c01bcf83 ffff8308299e7ba0 ffff82c4c01f1222 >>> (XEN) 6000001800000000 ffffffff810402c4 ffff8308299e7c50 ffff8300aebdd000 >>> (XEN) ffff8308299e7c50 ffff8300aebdd000 0000000000000000 ffff82c4c01c85dc >>> (XEN) ffffffff81039e63 0a9b00100000000f 00000000ffffffff 0000000000000000 >>> (XEN) 00000000ffffffff 0000000000000000 00000000ffffffff ffff831835cb0010 >>> (XEN) Xen call trace: >>> (XEN) [<ffff82c4c01ec7bb>] p2m_flush_table+0x1db/0x1f0 >>> (XEN) [<ffff82c4c01f0431>] p2m_flush_nestedp2m+0x21/0x30 >>> (XEN) [<ffff82c4c01f1dc5>] p2m_set_entry+0x565/0x650 >>> (XEN) [<ffff82c4c01ecf50>] set_p2m_entry+0x90/0x130 >>> (XEN) [<ffff82c4c01f3c8f>] p2m_pod_zero_check_superpage+0x21f/0x460 >>> (XEN) [<ffff82c4c01f6019>] p2m_pod_demand_populate+0x699/0x890 >>> (XEN) [<ffff82c4c01bcf83>] hvm_emulate_one+0xc3/0x1f0 >>> (XEN) [<ffff82c4c01f1222>] p2m_gfn_to_mfn+0x392/0x3c0 >>> (XEN) [<ffff82c4c01c85dc>] handle_mmio+0x7c/0x1e0 >>> (XEN) [<ffff82c4c01f10e1>] p2m_gfn_to_mfn+0x251/0x3c0 >>> (XEN) [<ffff82c4c01eca58>] __get_gfn_type_access+0x68/0x210 >>> (XEN) [<ffff82c4c01c1843>] hvm_hap_nested_page_fault+0xc3/0x510 >>> (XEN) [<ffff82c4c011a447>] csched_vcpu_wake+0x367/0x580 >>> >>>>>> Any hints on what the problem may be or a good place to start to look to >>>>>> diagnose it? >>>>> You'll need to gather some logs I think. Ideally a serial console log or >>>>> if not try using "noreboot" on your hypervisor command line to try and >>>>> see the last messages before it reboots. >>>>> >>>>> Ian. >>>>> >>>>> >>>> >>> -- Alvin Starr || voice: (905)513-7688 Netvel Inc. || Cell: (416)806-0133 alvin@netvel.net || ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xen-users] nestedhvm. 2014-05-20 16:59 ` Andres Lagar-Cavilla 2014-05-20 17:32 ` Alvin Starr @ 2014-05-21 2:05 ` Alvin Starr 2014-05-21 9:09 ` Ian Campbell 2 siblings, 0 replies; 9+ messages in thread From: Alvin Starr @ 2014-05-21 2:05 UTC (permalink / raw) To: Andres Lagar-Cavilla, Tim Deegan Cc: xen-users, Ian Campbell, Andres Lagar-Cavilla, xen-devel making mem == maxmem does make the xen panic go away but I am seeing . Now I am seeing "io.c:204:d3 MMIO emulation failed @ a9b9:b80c: 09 01 00 00 00 00 00 00 99 3a" and the domU trying to run kvm tends to just reboot. On 05/20/2014 12:59 PM, Andres Lagar-Cavilla wrote: > On May 20, 2014, at 12:37 PM, Tim Deegan <tim@xen.org> wrote: > >> At 09:56 +0100 on 20 May (1400576182), Ian Campbell wrote: >>> Adding xen-devel and some relevant maintainers. >>> >>>> On 05/19/2014 11:40 AM, Ian Campbell wrote: >>>>> On Sun, 2014-05-18 at 08:02 -0400, Alvin Starr wrote: >>>>>> I am trying to run nested hypervisors to do some openstack experiments. >>>>>> I seem to be able to run xen-on-xen with no problems but if i try to run >>>>>> kvm-on-xen the system seems to spontaneously reboot. >>>>>> I get the same results with xen 4.3 or 4.4. >>>>>> The dom0 is running fedora-20 >>>>>> The experiment environment is Centos6 with RDO >>> On Mon, 2014-05-19 at 23:53 -0400, Alvin Starr wrote: >>>> Here is the serial port output. >>>> boot log along with panic. >>> Which contains: >>> (XEN) mm locking order violation: 260 > 222 >>> (XEN) Xen BUG at mm-locks.h:118 >>> (full stack trace is below) >>> >>> That lead me to >>> http://lists.xen.org/archives/html/xen-devel/2013-02/msg01372.html but >>> not to a patch. Was there one? I've grepped the git logs for hints but >>> not found it... >> I don't believe there was, no. I'm not convinced that making shadow >> code do locked p2m lookups is the right answer, anyway, though I >> suppose it would stop this particular crash. >> >> In the meantime, at least it suggests a workaround, which is to boot >> the KVM VM with max-mem == memory (or however Openstack expresses that). > The problem arises from the use of PoD in L1 in combination with nested. L1 being the first level VM which runs the nested hypervisor. PoD being populate on demand covering the gap between maxmem and real memory. > > It might be that you need a small tweak to nova.conf. Kinda curious as to how you got to run openstack with new Xen, since a lot of production I've seen uses traditional xenserver. A different topic though. > > Andres >> Tim. >> >>> (XEN) ----[ Xen-4.3.2 x86_64 debug=n Not tainted ]---- >>> (XEN) CPU: 23 >>> (XEN) RIP: e008:[<ffff82c4c01ec7bb>] p2m_flush_table+0x1db/0x1f0 >>> (XEN) RFLAGS: 0000000000010286 CONTEXT: hypervisor >>> (XEN) rax: ffff8308299ed020 rbx: ffff831835cb0540 rcx: 0000000000000000 >>> (XEN) rdx: ffff8308299e0000 rsi: 000000000000000a rdi: ffff82c4c027d658 >>> (XEN) rbp: ffff82c4c031b648 rsp: ffff8308299e7998 r8: 0000000000000004 >>> (XEN) r9: 0000000000000000 r10: ffff82c4c022ce64 r11: 0000000000000003 >>> (XEN) r12: ffff83202cf99000 r13: 0000000000000000 r14: 0000000000000009 >>> (XEN) r15: 0000000000000000 cr0: 0000000080050033 cr4: 00000000000406f0 >>> (XEN) cr3: 0000001834178000 cr2: 0000000000000000 >>> (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008 >>> (XEN) Xen stack trace from rsp=ffff8308299e7998: >>> (XEN) 0000000000000008 ffff83202cf99000 0000000000000006 0000000000000000 >>> (XEN) 0000000000000009 ffff82c4c01f0431 0000000000000000 ffff831835cb0010 >>> (XEN) 0000000000371600 ffff82c4c01f1dc5 2000000000000000 00000000016e8400 >>> (XEN) ffff831836e38c58 ffff8308299e7a08 0000000001836e38 ffff831836e38000 >>> (XEN) 0000000000000000 0000000000000000 0000000000000000 ffff831835cb0010 >>> (XEN) 00000000000ee200 0000000000000000 0000000000000200 ffff831835cb0010 >>> (XEN) 0000000000000001 0000000000371600 0000000000000200 ffff82c4c01ecf50 >>> (XEN) ffff83202cf99000 0000000700000006 0000000001836e37 ffff831835cb0010 >>> (XEN) ffff83202cf99000 ffff8308299e7af0 0000000000000200 0000000000371600 >>> (XEN) 00000000016e8400 ffff82c4c01f3c8f ffff8308299e7aec 0000000035cb0010 >>> (XEN) 0000000000000001 00000000016e8400 0000000000000200 ffff82c400000007 >>> (XEN) ffff83202cf99000 0000000700000000 ffff83040e4402c4 ffff831835cb0010 >>> (XEN) 0000000000000009 0000000000f9f600 00000000000ee200 0000000000000200 >>> (XEN) ffff83202cf99000 ffff82c4c01f6019 00000000000ee200 ffff830800000200 >>> (XEN) ffff831835cb04f8 ffff8308299e7f18 0000000000000003 ffff8308299e7c68 >>> (XEN) 0000000000000010 ffff82c4c01bcf83 ffff8308299e7ba0 ffff82c4c01f1222 >>> (XEN) 6000001800000000 ffffffff810402c4 ffff8308299e7c50 ffff8300aebdd000 >>> (XEN) ffff8308299e7c50 ffff8300aebdd000 0000000000000000 ffff82c4c01c85dc >>> (XEN) ffffffff81039e63 0a9b00100000000f 00000000ffffffff 0000000000000000 >>> (XEN) 00000000ffffffff 0000000000000000 00000000ffffffff ffff831835cb0010 >>> (XEN) Xen call trace: >>> (XEN) [<ffff82c4c01ec7bb>] p2m_flush_table+0x1db/0x1f0 >>> (XEN) [<ffff82c4c01f0431>] p2m_flush_nestedp2m+0x21/0x30 >>> (XEN) [<ffff82c4c01f1dc5>] p2m_set_entry+0x565/0x650 >>> (XEN) [<ffff82c4c01ecf50>] set_p2m_entry+0x90/0x130 >>> (XEN) [<ffff82c4c01f3c8f>] p2m_pod_zero_check_superpage+0x21f/0x460 >>> (XEN) [<ffff82c4c01f6019>] p2m_pod_demand_populate+0x699/0x890 >>> (XEN) [<ffff82c4c01bcf83>] hvm_emulate_one+0xc3/0x1f0 >>> (XEN) [<ffff82c4c01f1222>] p2m_gfn_to_mfn+0x392/0x3c0 >>> (XEN) [<ffff82c4c01c85dc>] handle_mmio+0x7c/0x1e0 >>> (XEN) [<ffff82c4c01f10e1>] p2m_gfn_to_mfn+0x251/0x3c0 >>> (XEN) [<ffff82c4c01eca58>] __get_gfn_type_access+0x68/0x210 >>> (XEN) [<ffff82c4c01c1843>] hvm_hap_nested_page_fault+0xc3/0x510 >>> (XEN) [<ffff82c4c011a447>] csched_vcpu_wake+0x367/0x580 >>> >>>>>> Any hints on what the problem may be or a good place to start to look to >>>>>> diagnose it? >>>>> You'll need to gather some logs I think. Ideally a serial console log or >>>>> if not try using "noreboot" on your hypervisor command line to try and >>>>> see the last messages before it reboots. >>>>> >>>>> Ian. >>>>> >>>>> >>>> >>> -- Alvin Starr || voice: (905)513-7688 Netvel Inc. || Cell: (416)806-0133 alvin@netvel.net || ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xen-users] nestedhvm. 2014-05-20 16:59 ` Andres Lagar-Cavilla 2014-05-20 17:32 ` Alvin Starr 2014-05-21 2:05 ` Alvin Starr @ 2014-05-21 9:09 ` Ian Campbell 2014-05-21 11:20 ` Alvin Starr 2014-05-26 19:20 ` Alvin Starr 2 siblings, 2 replies; 9+ messages in thread From: Ian Campbell @ 2014-05-21 9:09 UTC (permalink / raw) To: Andres Lagar-Cavilla Cc: xen-users, Alvin Starr, Tim Deegan, Andres Lagar-Cavilla, xen-devel On Tue, 2014-05-20 at 12:59 -0400, Andres Lagar-Cavilla wrote: > On May 20, 2014, at 12:37 PM, Tim Deegan <tim@xen.org> wrote: > > In the meantime, at least it suggests a workaround, which is to boot > > the KVM VM with max-mem == memory (or however Openstack expresses that). > The problem arises from the use of PoD in L1 in combination with nested. Ah yes, this rings a bell, and it's even documented in http://wiki.xenproject.org/wiki/Nested_Virtualization_in_Xen#Know_Issues Ian. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xen-users] nestedhvm. 2014-05-21 9:09 ` Ian Campbell @ 2014-05-21 11:20 ` Alvin Starr 2014-05-26 19:20 ` Alvin Starr 1 sibling, 0 replies; 9+ messages in thread From: Alvin Starr @ 2014-05-21 11:20 UTC (permalink / raw) To: Ian Campbell, Andres Lagar-Cavilla Cc: xen-users, Tim Deegan, Andres Lagar-Cavilla, xen-devel In checking out the referenced URL I am left with the question "Is nested virtualization supported under AMD?" On 05/21/2014 05:09 AM, Ian Campbell wrote: > On Tue, 2014-05-20 at 12:59 -0400, Andres Lagar-Cavilla wrote: >> On May 20, 2014, at 12:37 PM, Tim Deegan <tim@xen.org> wrote: >>> In the meantime, at least it suggests a workaround, which is to boot >>> the KVM VM with max-mem == memory (or however Openstack expresses that). >> The problem arises from the use of PoD in L1 in combination with nested. > > Ah yes, this rings a bell, and it's even documented in > http://wiki.xenproject.org/wiki/Nested_Virtualization_in_Xen#Know_Issues > > Ian. > -- Alvin Starr || voice: (905)513-7688 Netvel Inc. || Cell: (416)806-0133 alvin@netvel.net || ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xen-users] nestedhvm. 2014-05-21 9:09 ` Ian Campbell 2014-05-21 11:20 ` Alvin Starr @ 2014-05-26 19:20 ` Alvin Starr 1 sibling, 0 replies; 9+ messages in thread From: Alvin Starr @ 2014-05-26 19:20 UTC (permalink / raw) To: Ian Campbell, Andres Lagar-Cavilla Cc: xen-users, Tim Deegan, Andres Lagar-Cavilla, xen-devel I found I also needed cpuid="host,svm_npt=0" I am wondering if max-mem and memory need to be forced to be equal in the case of a nested HVM. Or do not allow for the creation of the domain if the values are not eauql. On 05/21/2014 05:09 AM, Ian Campbell wrote: > On Tue, 2014-05-20 at 12:59 -0400, Andres Lagar-Cavilla wrote: >> On May 20, 2014, at 12:37 PM, Tim Deegan <tim@xen.org> wrote: >>> In the meantime, at least it suggests a workaround, which is to boot >>> the KVM VM with max-mem == memory (or however Openstack expresses that). >> The problem arises from the use of PoD in L1 in combination with nested. > > Ah yes, this rings a bell, and it's even documented in > http://wiki.xenproject.org/wiki/Nested_Virtualization_in_Xen#Know_Issues > > Ian. > -- Alvin Starr || voice: (905)513-7688 Netvel Inc. || Cell: (416)806-0133 alvin@netvel.net || ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2014-05-26 19:20 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <5378A14F.5@netvel.net>
[not found] ` <1400514018.6114.19.camel@kazak.uk.xensource.com>
[not found] ` <537AD1A0.50702@netvel.net>
2014-05-20 8:56 ` [Xen-users] nestedhvm Ian Campbell
2014-05-20 12:47 ` Alvin Starr
2014-05-20 16:37 ` Tim Deegan
2014-05-20 16:59 ` Andres Lagar-Cavilla
2014-05-20 17:32 ` Alvin Starr
2014-05-21 2:05 ` Alvin Starr
2014-05-21 9:09 ` Ian Campbell
2014-05-21 11:20 ` Alvin Starr
2014-05-26 19:20 ` Alvin Starr
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).