* Xen-unstable: Xen panic when shutting down HVM guest with PCI passthrough: RIP: e008:[<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf
@ 2014-06-05 14:54 Sander Eikelenboom
2014-06-05 15:03 ` Andrew Cooper
0 siblings, 1 reply; 12+ messages in thread
From: Sander Eikelenboom @ 2014-06-05 14:54 UTC (permalink / raw)
To: xen-devel, Jan Beulich
[-- Attachment #1: Type: text/plain, Size: 5242 bytes --]
Hi,
When shutting down a HVM guest with PCI passthrough Xen panics with the panic
below (complete xl-dmesg attached).
# addr2line -e xen-syms ffff82d0801099b1
/usr/src/new/xen-unstable/xen/common/event_channel.c:1326
which is:
pirq_set_affinity(d, chn->u.pirq.irq, mask);
(XEN) [2014-06-05 14:10:54.290] AMD-Vi: Disable: device id = 0x700, domain = 1, paging mode = 4
(XEN) [2014-06-05 14:10:54.290] AMD-Vi: Setup I/O page table: device id = 0x700, type = 0x1, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:10:54.290] AMD-Vi: Re-assign 0000:07:00.0 from dom1 to dom0
(XEN) [2014-06-05 14:10:54.650] ----[ Xen-4.5-unstable x86_64 debug=y Not tainted ]----
(XEN) [2014-06-05 14:10:54.650] CPU: 5
(XEN) [2014-06-05 14:10:54.650] RIP: e008:[<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf
(XEN) [2014-06-05 14:10:54.650] RFLAGS: 0000000000010202 CONTEXT: hypervisor
(XEN) [2014-06-05 14:10:54.650] rax: 0000000000000019 rbx: 0000000000000320 rcx: 0000000000000001
(XEN) [2014-06-05 14:10:54.650] rdx: ffff83054ef86020 rsi: 0000000000000200 rdi: ffff8305416eb0bc
(XEN) [2014-06-05 14:10:54.650] rbp: ffff83054ef7fce8 rsp: ffff83054ef7fcc8 r8: 0000000000000001
(XEN) [2014-06-05 14:10:54.650] r9: 000000000000003a r10: ffff82e008e31940 r11: 0000000000000001
(XEN) [2014-06-05 14:10:54.650] r12: ffff8305416eb000 r13: ffff82d08023d740 r14: ffff8305416eb0b8
(XEN) [2014-06-05 14:10:54.650] r15: ffffffffffffffff cr0: 000000008005003b cr4: 00000000000006f0
(XEN) [2014-06-05 14:10:54.650] cr3: 0000000537296000 cr2: 0000000000000328
(XEN) [2014-06-05 14:10:54.650] ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e010 cs: e008
(XEN) [2014-06-05 14:10:54.650] Xen stack trace from rsp=ffff83054ef7fcc8:
(XEN) [2014-06-05 14:10:54.650] ffff83009faf7000 0000000000000000 ffff830546cb6ee0 ffff83054eff8d00
(XEN) [2014-06-05 14:10:54.650] ffff83054ef7fd68 ffff82d080126e2f ffff83054ef7fd48 ffff830546df8ef0
(XEN) [2014-06-05 14:10:54.650] 00000000416eb1c0 ffff830546333870 ffff8305416eb000 ffff82d080320d60
(XEN) [2014-06-05 14:10:54.650] ffff82d080277d20 ffff83054eff1068 0000000000000000 ffff8305416eb000
(XEN) [2014-06-05 14:10:54.650] ffff8305416eb000 0000000000000000 0000000000000000 0000000000000011
(XEN) [2014-06-05 14:10:54.650] ffff83054ef7fd98 ffff82d080105dcc ffff82d080129dcf ffff8305416eb000
(XEN) [2014-06-05 14:10:54.650] ffffffffffffffff 00007f9b40a0b004 ffff83054ef7fef8 ffff82d080103926
(XEN) [2014-06-05 14:10:54.650] ffff83054ef913a0 0000000000000282 ffff8305480e1010 ffff83009fd27000
(XEN) [2014-06-05 14:10:54.650] 0000000000000000 ffff83009fd2718c 0000000000000246 0000000000000011
(XEN) [2014-06-05 14:10:54.650] ffff83054ef7fdf8 0000000000000206 ffff83054ef7fe18 ffff82d08012c757
(XEN) [2014-06-05 14:10:54.650] ffff83009fd27060 0000000000000005 ffff83054ef7fe68 0000000000000206
(XEN) [2014-06-05 14:10:54.650] ffff83009fd27088 0000000000000286 0000000a00000002 0000000000000001
(XEN) [2014-06-05 14:10:54.650] 0000000001eb2168 0000000001eb16a0 00007f9b4037c000 00007f9b407fc9f2
(XEN) [2014-06-05 14:10:54.650] 35622d6200000005 0000000000000000 00007fff2b72c740 00007f9b40158620
(XEN) [2014-06-05 14:10:54.650] 0000000000000010 0000000001ea8330 00007fff2b72c7b0 0000000001eb1e40
(XEN) [2014-06-05 14:10:54.650] 0000000000000001 00007f9b40802a55 0000000000000000 00007f9b3fa753c7
(XEN) [2014-06-05 14:10:54.650] ffff83054ef7fed8 ffff83009fd27000 0000000000000011 ffff88004d45ab98
(XEN) [2014-06-05 14:10:54.650] 00007fff2b72c650 0000000000000011 00007cfab10800c7 ffff82d08022ca8b
(XEN) [2014-06-05 14:10:54.651] ffffffff8100148a 0000000000000024 0000000000000011 00007fff2b72c650
(XEN) [2014-06-05 14:10:54.651] ffff88004d45ab98 0000000000000011 ffff88004a14be98 00007fff2b72c650
(XEN) [2014-06-05 14:10:54.651] Xen call trace:
(XEN) [2014-06-05 14:10:54.651] [<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf
(XEN) [2014-06-05 14:10:54.651] [<ffff82d080126e2f>] sched_move_domain+0x2c1/0x3ea
(XEN) [2014-06-05 14:10:54.651] [<ffff82d080105dcc>] domain_kill+0xd0/0x159
(XEN) [2014-06-05 14:10:54.651] [<ffff82d080103926>] do_domctl+0xab8/0x1542
(XEN) [2014-06-05 14:10:54.651] [<ffff82d08022ca8b>] syscall_enter+0xeb/0x145
(XEN) [2014-06-05 14:10:54.651]
(XEN) [2014-06-05 14:10:54.651] Pagetable walk from 0000000000000328:
(XEN) [2014-06-05 14:10:54.651] L4[0x000] = 0000000544e38067 0000000000057fc5
(XEN) [2014-06-05 14:10:54.651] L3[0x000] = 000000053cc28067 000000000004fdd5
(XEN) [2014-06-05 14:10:54.651] L2[0x000] = 0000000000000000 ffffffffffffffff
(XEN) [2014-06-05 14:10:55.709]
(XEN) [2014-06-05 14:10:55.718] ****************************************
(XEN) [2014-06-05 14:10:55.737] Panic on CPU 5:
(XEN) [2014-06-05 14:10:55.750] FATAL PAGE FAULT
(XEN) [2014-06-05 14:10:55.763] [error_code=0000]
(XEN) [2014-06-05 14:10:55.776] Faulting linear address: 0000000000000328
(XEN) [2014-06-05 14:10:55.796] ****************************************
(XEN) [2014-06-05 14:10:55.815]
(XEN) [2014-06-05 14:10:55.824] Reboot in five seconds...
(XEN) [2014-06-05 14:10:55.839] APIC error on CPU0: 00(08)
(XEN) [2014-06-05 14:10:55.855] APIC error on CPU0: 08(08)
[-- Attachment #2: xl-dmesg.txt --]
[-- Type: text/plain, Size: 88791 bytes --]
__ __ _ _ ____ _ _ _
\ \/ /___ _ __ | || | | ___| _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ | || |_ |___ \ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | |__ _| ___) |__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |_|(_)____/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 4.5-unstable (root@dyndns.org) (gcc-4.7.real (Debian 4.7.2-5) 4.7.2) debug=y Wed Jun 4 18:09:18 CEST 2014
(XEN) Latest ChangeSet: Wed Jun 4 14:58:38 2014 +0100 git:278283c-dirty
(XEN) Bootloader: GRUB 1.99-27+deb7u2
(XEN) Command line: dom0_mem=1536M,max:1536M loglvl=all loglvl_guest=all console_timestamps=datems vga=gfx-1280x1024x32 cpuidle cpufreq=xen debug lapic=debug apic_verbosity=debug apic=debug iommu=on,verbose,debug,amd-iommu-debug ivrs_ioapic[6]=00:14.0 ivrs_hpet[0]=00:14.0 com1=38400,8n1 console=vga,com1
(XEN) Video information:
(XEN) VGA is graphics mode 1280x1024, 32 bpp
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 0000000000099800 (usable)
(XEN) 0000000000099800 - 00000000000a0000 (reserved)
(XEN) 00000000000e4000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000009ff90000 (usable)
(XEN) 000000009ff90000 - 000000009ff9e000 (ACPI data)
(XEN) 000000009ff9e000 - 000000009ffe0000 (ACPI NVS)
(XEN) 000000009ffe0000 - 00000000a0000000 (reserved)
(XEN) 00000000ffe00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000560000000 (usable)
(XEN) ACPI: RSDP 000FB100, 0014 (r0 ACPIAM)
(XEN) ACPI: RSDT 9FF90000, 0048 (r1 MSI OEMSLIC 20100913 MSFT 97)
(XEN) ACPI: FACP 9FF90200, 0084 (r1 7640MS A7640100 20100913 MSFT 97)
(XEN) ACPI: DSDT 9FF905E0, 9427 (r1 A7640 A7640100 100 INTL 20051117)
(XEN) ACPI: FACS 9FF9E000, 0040
(XEN) ACPI: APIC 9FF90390, 0088 (r1 7640MS A7640100 20100913 MSFT 97)
(XEN) ACPI: MCFG 9FF90420, 003C (r1 7640MS OEMMCFG 20100913 MSFT 97)
(XEN) ACPI: SLIC 9FF90460, 0176 (r1 MSI OEMSLIC 20100913 MSFT 97)
(XEN) ACPI: OEMB 9FF9E040, 0072 (r1 7640MS A7640100 20100913 MSFT 97)
(XEN) ACPI: SRAT 9FF9A5E0, 0108 (r3 AMD FAM_F_10 2 AMD 1)
(XEN) ACPI: HPET 9FF9A6F0, 0038 (r1 7640MS OEMHPET 20100913 MSFT 97)
(XEN) ACPI: IVRS 9FF9A730, 0110 (r1 AMD RD890S 202031 AMD 0)
(XEN) ACPI: SSDT 9FF9A840, 0DA4 (r1 A M I POWERNOW 1 AMD 1)
(XEN) System RAM: 20479MB (20970660kB)
(XEN) SRAT: PXM 0 -> APIC 0 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 1 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 2 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 3 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 4 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 5 -> Node 0
(XEN) SRAT: Node 0 PXM 0 0-a0000
(XEN) SRAT: Node 0 PXM 0 100000-a0000000
(XEN) SRAT: Node 0 PXM 0 100000000-560000000
(XEN) NUMA: Allocated memnodemap from 55d102000 - 55d108000
(XEN) NUMA: Using 8 for the hash shift.
(XEN) Domain heap initialised
(XEN) vesafb: framebuffer at 0xd0000000, mapped to 0xffff82c000201000, using 6144k, total 16384k
(XEN) vesafb: mode is 1280x1024x32, linelength=5120, font 8x16
(XEN) vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) APIC boot state is 'xapic'
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: SLEEP INFO: pm1x_cnt[1:804,1:0], pm1x_evt[1:800,1:0]
(XEN) ACPI: wakeup_vec[9ff9e00c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
(XEN) Processor #2 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
(XEN) Processor #3 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
(XEN) Processor #4 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
(XEN) Processor #5 0:10 APIC version 16
(XEN) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
(XEN) ACPI: HPET id: 0x8300 base: 0xfed00000
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 6 CPUs (0 hotplug CPUs)
(XEN) mapped APIC to ffff82cfffdfb000 (fee00000)
(XEN) mapped IOAPIC to ffff82cfffdfa000 (fec00000)
(XEN) mapped IOAPIC to ffff82cfffdf9000 (fec20000)
(XEN) IRQ limits: 56 GSI, 1112 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3200.187 MHz processor.
(XEN) Initing memory sharing.
(XEN) AMD Fam10h machine check reporting enabled
(XEN) alt table ffff82d0802d0c50 -> ffff82d0802d18b0
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - ff
(XEN) PCI: Not using MCFG for segment 0000 bus 00-ff
(XEN) AMD-Vi: Found MSI capability block at 0x54
(XEN) AMD-Vi: ACPI Table:
(XEN) AMD-Vi: Signature IVRS
(XEN) AMD-Vi: Length 0x110
(XEN) AMD-Vi: Revision 0x1
(XEN) AMD-Vi: CheckSum 0xda
(XEN) AMD-Vi: OEM_Id AMD
(XEN) AMD-Vi: OEM_Table_Id RD890S
(XEN) AMD-Vi: OEM_Revision 0x202031
(XEN) AMD-Vi: Creator_Id AMD
(XEN) AMD-Vi: Creator_Revision 0
(XEN) AMD-Vi: IVRS Block: type 0x10 flags 0x3e len 0xe0 id 0x2
(XEN) AMD-Vi: IVHD Device Entry: type 0x3 id 0 flags 0
(XEN) AMD-Vi: Dev_Id Range: 0 -> 0x2
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0x10 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x3 id 0xd00 flags 0
(XEN) AMD-Vi: Dev_Id Range: 0xd00 -> 0xd01
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0x18 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x3 id 0xc00 flags 0
(XEN) AMD-Vi: Dev_Id Range: 0xc00 -> 0xc01
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0x28 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0xb00 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0x30 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0xa00 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0x48 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0x900 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0x50 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0x800 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0x58 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x3 id 0x700 flags 0
(XEN) AMD-Vi: Dev_Id Range: 0x700 -> 0x701
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0x60 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0x500 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0 id 0 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x43 id 0x608 flags 0
(XEN) AMD-Vi: Dev_Id Range: 0x608 -> 0x6ff alias 0x600
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0x68 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0x400 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0x88 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x3 id 0x90 flags 0
(XEN) AMD-Vi: Dev_Id Range: 0x90 -> 0x92
(XEN) AMD-Vi: IVHD Device Entry: type 0x3 id 0x98 flags 0
(XEN) AMD-Vi: Dev_Id Range: 0x98 -> 0x9a
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0xa0 flags 0xd7
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0xa2 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0xa3 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0xa4 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x43 id 0x300 flags 0
(XEN) AMD-Vi: Dev_Id Range: 0x300 -> 0x3ff alias 0xa4
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0xa5 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0xa8 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0xa9 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x2 id 0x100 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x3 id 0xb0 flags 0
(XEN) AMD-Vi: Dev_Id Range: 0xb0 -> 0xb2
(XEN) AMD-Vi: IVHD Device Entry: type 0 id 0 flags 0
(XEN) AMD-Vi: IVHD Device Entry: type 0x48 id 0 flags 0xd7
(XEN) AMD-Vi: IVHD Special: 0000:00:14.0 variety 0x2 handle 0
(XEN) AMD-Vi: IVHD: Command line override present for HPET 0 (IVRS: 0 devID 0000:00:14.0)
(XEN) AMD-Vi: IVHD Device Entry: type 0x48 id 0 flags 0
(XEN) AMD-Vi: IVHD Special: 0000:00:00.1 variety 0x1 handle 0x7
(XEN) AMD-Vi: IOMMU 0 Enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) Getting VERSION: 80050010
(XEN) Getting VERSION: 80050010
(XEN) Getting ID: 0
(XEN) Getting LVT0: 700
(XEN) Getting LVT1: 400
(XEN) enabled ExtINT on CPU#0
(XEN) ESR value before enabling vector: 0x4 after: 0
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 6-0, 6-16, 6-17, 6-18, 6-19, 6-20, 6-21, 6-22, 6-23, 7-0, 7-1, 7-2, 7-3, 7-4, 7-5, 7-6, 7-7, 7-8, 7-9, 7-10, 7-11, 7-12, 7-13, 7-14, 7-15, 7-16, 7-17, 7-18, 7-19, 7-20, 7-21, 7-22, 7-23, 7-24, 7-25, 7-26, 7-27, 7-28, 7-29, 7-30, 7-31 not connected.
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) number of MP IRQ sources: 15.
(XEN) number of IO-APIC #6 registers: 24.
(XEN) number of IO-APIC #7 registers: 32.
(XEN) testing the IO APIC.......................
(XEN) IO APIC #6......
(XEN) .... register #00: 06000000
(XEN) ....... : physical APIC id: 06
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178021
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0021
(XEN) .... register #02: 06000000
(XEN) ....... : arbitration: 06
(XEN) .... register #03: 07000000
(XEN) ....... : Boot DT : 0
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 1 30
(XEN) 01 001 01 0 0 0 0 0 1 1 30
(XEN) 02 001 01 0 0 0 0 0 1 1 F0
(XEN) 03 001 01 0 0 0 0 0 1 1 38
(XEN) 04 001 01 0 0 0 0 0 1 1 F1
(XEN) 05 001 01 0 0 0 0 0 1 1 40
(XEN) 06 001 01 0 0 0 0 0 1 1 48
(XEN) 07 001 01 0 0 0 0 0 1 1 50
(XEN) 08 001 01 0 0 0 0 0 1 1 58
(XEN) 09 001 01 1 1 0 1 0 1 0 00
(XEN) 0a 001 01 0 0 0 0 0 1 1 68
(XEN) 0b 001 01 0 0 0 0 0 1 1 70
(XEN) 0c 001 01 0 0 0 0 0 1 1 78
(XEN) 0d 001 01 0 0 0 0 0 1 1 88
(XEN) 0e 001 01 0 0 0 0 0 1 1 90
(XEN) 0f 001 01 0 0 0 0 0 1 1 98
(XEN) 10 000 00 1 0 0 0 0 0 1 30
(XEN) 11 000 00 1 0 0 0 0 0 1 30
(XEN) 12 000 00 1 0 0 0 0 0 1 30
(XEN) 13 000 00 1 0 0 0 0 0 1 30
(XEN) 14 000 00 1 0 0 0 0 0 1 30
(XEN) 15 000 00 1 0 0 0 0 0 1 30
(XEN) 16 000 00 1 0 0 0 0 0 1 30
(XEN) 17 000 00 1 0 0 0 0 0 1 30
(XEN) IO APIC #7......
(XEN) .... register #00: 07000000
(XEN) ....... : physical APIC id: 07
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 001F8021
(XEN) ....... : max redirection entries: 001F
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0021
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) 18 000 00 1 0 0 0 0 0 0 00
(XEN) 19 000 00 1 0 0 0 0 0 0 00
(XEN) 1a 000 00 1 0 0 0 0 0 0 00
(XEN) 1b 000 00 1 0 0 0 0 0 0 00
(XEN) 1c 000 00 1 0 0 0 0 0 0 00
(XEN) 1d 000 00 1 0 0 0 0 0 0 00
(XEN) 1e 000 00 1 0 0 0 0 0 0 00
(XEN) 1f 000 00 1 0 0 0 0 0 0 00
(XEN) Using vector-based indexing
(XEN) IRQ to pin mappings:
(XEN) IRQ240 -> 0:2
(XEN) IRQ48 -> 0:1
(XEN) IRQ56 -> 0:3
(XEN) IRQ241 -> 0:4
(XEN) IRQ64 -> 0:5
(XEN) IRQ72 -> 0:6
(XEN) IRQ80 -> 0:7
(XEN) IRQ88 -> 0:8
(XEN) IRQ96 -> 0:9
(XEN) IRQ104 -> 0:10
(XEN) IRQ112 -> 0:11
(XEN) IRQ120 -> 0:12
(XEN) IRQ136 -> 0:13
(XEN) IRQ144 -> 0:14
(XEN) IRQ152 -> 0:15
(XEN) .................................... done.
(XEN) Using local APIC timer interrupts.
(XEN) calibrating APIC timer ...
(XEN) ..... CPU clock speed is 3200.1421 MHz.
(XEN) ..... host bus clock speed is 200.0088 MHz.
(XEN) ..... bus_scale = 0xccd7
(XEN) [2014-06-05 14:04:56.663] Platform timer is 14.318MHz HPET
(XEN) [2014-06-05 14:04:56.684] Allocated console ring of 64 KiB.
(XEN) [2014-06-05 14:04:56.690] HVM: ASIDs enabled.
(XEN) [2014-06-05 14:04:56.696] SVM: Supported advanced features:
(XEN) [2014-06-05 14:04:56.702] - Nested Page Tables (NPT)
(XEN) [2014-06-05 14:04:56.708] - Last Branch Record (LBR) Virtualisation
(XEN) [2014-06-05 14:04:56.714] - Next-RIP Saved on #VMEXIT
(XEN) [2014-06-05 14:04:56.720] - Pause-Intercept Filter
(XEN) [2014-06-05 14:04:56.726] HVM: SVM enabled
(XEN) [2014-06-05 14:04:56.732] HVM: Hardware Assisted Paging (HAP) detected
(XEN) [2014-06-05 14:04:56.739] HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) [2014-06-05 14:04:56.745] HVM: PVH mode not supported on this platform
(XEN) [2014-06-05 14:04:56.771] masked ExtINT on CPU#1
(XEN) [2014-06-05 14:04:56.798] masked ExtINT on CPU#2
(XEN) [2014-06-05 14:04:56.824] masked ExtINT on CPU#3
(XEN) [2014-06-05 14:04:56.851] masked ExtINT on CPU#4
(XEN) [2014-06-05 14:04:56.877] masked ExtINT on CPU#5
(XEN) [2014-06-05 14:04:56.884] Brought up 6 CPUs
(XEN) [2014-06-05 14:04:56.894] AMD-Vi: Failed to setup HPET MSI remapping. Wrong HPET.
(XEN) [2014-06-05 14:04:56.900] AMD-Vi: Failed to setup HPET MSI remapping. Wrong HPET.
(XEN) [2014-06-05 14:04:56.907] AMD-Vi: Failed to setup HPET MSI remapping. Wrong HPET.
(XEN) [2014-06-05 14:04:56.914] HPET: 3 timers usable for broadcast (3 total)
(XEN) [2014-06-05 14:04:56.941] ACPI sleep modes: S3
(XEN) [2014-06-05 14:04:56.948] MCA: Use hw thresholding to adjust polling frequency
(XEN) [2014-06-05 14:04:56.954] mcheck_poll: Machine check polling timer started.
(XEN) [2014-06-05 14:04:56.962] Xenoprofile: Failed to setup IBS LVT offset, IBSCTL = 0xffffffff
(XEN) [2014-06-05 14:04:56.969] *** LOADING DOMAIN 0 ***
(XEN) [2014-06-05 14:04:57.142] elf_parse_binary: phdr: paddr=0x1000000 memsz=0x10a3000
(XEN) [2014-06-05 14:04:57.149] elf_parse_binary: phdr: paddr=0x2200000 memsz=0x136000
(XEN) [2014-06-05 14:04:57.157] elf_parse_binary: phdr: paddr=0x2336000 memsz=0x15500
(XEN) [2014-06-05 14:04:57.164] elf_parse_binary: phdr: paddr=0x234c000 memsz=0x13ab000
(XEN) [2014-06-05 14:04:57.172] elf_parse_binary: memory: 0x1000000 -> 0x36f7000
(XEN) [2014-06-05 14:04:57.179] elf_xen_parse_note: GUEST_OS = "linux"
(XEN) [2014-06-05 14:04:57.187] elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) [2014-06-05 14:04:57.194] elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) [2014-06-05 14:04:57.202] elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) [2014-06-05 14:04:57.209] elf_xen_parse_note: ENTRY = 0xffffffff8234c1f0
(XEN) [2014-06-05 14:04:57.217] elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000
(XEN) [2014-06-05 14:04:57.225] elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb|writable_descriptor_tables|auto_translated_physmap|supervisor_mode_kernel"
(XEN) [2014-06-05 14:04:57.241] elf_xen_parse_note: SUPPORTED_FEATURES = 0x90d
(XEN) [2014-06-05 14:04:57.249] elf_xen_parse_note: PAE_MODE = "yes"
(XEN) [2014-06-05 14:04:57.258] elf_xen_parse_note: LOADER = "generic"
(XEN) [2014-06-05 14:04:57.266] elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) [2014-06-05 14:04:57.275] elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) [2014-06-05 14:04:57.283] elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) [2014-06-05 14:04:57.292] elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) [2014-06-05 14:04:57.301] elf_xen_addr_calc_check: addresses:
(XEN) [2014-06-05 14:04:57.310] virt_base = 0xffffffff80000000
(XEN) [2014-06-05 14:04:57.320] elf_paddr_offset = 0x0
(XEN) [2014-06-05 14:04:57.329] virt_offset = 0xffffffff80000000
(XEN) [2014-06-05 14:04:57.338] virt_kstart = 0xffffffff81000000
(XEN) [2014-06-05 14:04:57.348] virt_kend = 0xffffffff836f7000
(XEN) [2014-06-05 14:04:57.358] virt_entry = 0xffffffff8234c1f0
(XEN) [2014-06-05 14:04:57.368] p2m_base = 0xffffffffffffffff
(XEN) [2014-06-05 14:04:57.378] Xen kernel: 64-bit, lsb, compat32
(XEN) [2014-06-05 14:04:57.388] Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x36f7000
(XEN) [2014-06-05 14:04:57.398] PHYSICAL MEMORY ARRANGEMENT:
(XEN) [2014-06-05 14:04:57.408] Dom0 alloc.: 0000000548000000->000000054c000000 (373216 pages to be allocated)
(XEN) [2014-06-05 14:04:57.419] Init. ramdisk: 000000055f1e0000->000000055ffff400
(XEN) [2014-06-05 14:04:57.430] VIRTUAL MEMORY ARRANGEMENT:
(XEN) [2014-06-05 14:04:57.441] Loaded kernel: ffffffff81000000->ffffffff836f7000
(XEN) [2014-06-05 14:04:57.451] Init. ramdisk: ffffffff836f7000->ffffffff84516400
(XEN) [2014-06-05 14:04:57.462] Phys-Mach map: ffffffff84517000->ffffffff84817000
(XEN) [2014-06-05 14:04:57.473] Start info: ffffffff84817000->ffffffff848174b4
(XEN) [2014-06-05 14:04:57.484] Page tables: ffffffff84818000->ffffffff84841000
(XEN) [2014-06-05 14:04:57.495] Boot stack: ffffffff84841000->ffffffff84842000
(XEN) [2014-06-05 14:04:57.506] TOTAL: ffffffff80000000->ffffffff84c00000
(XEN) [2014-06-05 14:04:57.517] ENTRY ADDRESS: ffffffff8234c1f0
(XEN) [2014-06-05 14:04:57.529] Dom0 has maximum 6 VCPUs
(XEN) [2014-06-05 14:04:57.540] elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff820a3000
(XEN) [2014-06-05 14:04:57.558] elf_load_binary: phdr 1 at 0xffffffff82200000 -> 0xffffffff82336000
(XEN) [2014-06-05 14:04:57.570] elf_load_binary: phdr 2 at 0xffffffff82336000 -> 0xffffffff8234b500
(XEN) [2014-06-05 14:04:57.581] elf_load_binary: phdr 3 at 0xffffffff8234c000 -> 0xffffffff824b9000
(XEN) [2014-06-05 14:04:58.747] AMD-Vi: Setup I/O page table: device id = 0, type = 0x6, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:58.759] AMD-Vi: Setup I/O page table: device id = 0x2, type = 0x7, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:58.771] AMD-Vi: Setup I/O page table: device id = 0x10, type = 0x2, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:58.783] AMD-Vi: Setup I/O page table: device id = 0x18, type = 0x2, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:58.796] AMD-Vi: Setup I/O page table: device id = 0x28, type = 0x2, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:58.808] AMD-Vi: Setup I/O page table: device id = 0x30, type = 0x2, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:58.821] AMD-Vi: Setup I/O page table: device id = 0x48, type = 0x2, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:58.834] AMD-Vi: Setup I/O page table: device id = 0x50, type = 0x2, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:58.847] AMD-Vi: Setup I/O page table: device id = 0x58, type = 0x2, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:58.861] AMD-Vi: Setup I/O page table: device id = 0x60, type = 0x2, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:58.874] AMD-Vi: Setup I/O page table: device id = 0x68, type = 0x2, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:58.888] AMD-Vi: Setup I/O page table: device id = 0x88, type = 0x7, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:58.902] AMD-Vi: Setup I/O page table: device id = 0x90, type = 0x7, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:58.916] AMD-Vi: Setup I/O page table: device id = 0x92, type = 0x7, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:58.930] AMD-Vi: Setup I/O page table: device id = 0x98, type = 0x7, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:58.944] AMD-Vi: Setup I/O page table: device id = 0x9a, type = 0x7, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:58.958] AMD-Vi: Setup I/O page table: device id = 0xa0, type = 0x7, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:58.973] AMD-Vi: Setup I/O page table: device id = 0xa2, type = 0x7, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:58.987] AMD-Vi: Setup I/O page table: device id = 0xa3, type = 0x7, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:59.002] AMD-Vi: Setup I/O page table: device id = 0xa4, type = 0x5, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:59.017] AMD-Vi: Setup I/O page table: device id = 0xa5, type = 0x7, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:59.032] AMD-Vi: Setup I/O page table: device id = 0xa8, type = 0x2, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:59.047] AMD-Vi: Setup I/O page table: device id = 0xb0, type = 0x7, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:59.063] AMD-Vi: Setup I/O page table: device id = 0xb2, type = 0x7, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:59.078] AMD-Vi: Skipping host bridge 0000:00:18.0
(XEN) [2014-06-05 14:04:59.094] AMD-Vi: Skipping host bridge 0000:00:18.1
(XEN) [2014-06-05 14:04:59.109] AMD-Vi: Skipping host bridge 0000:00:18.2
(XEN) [2014-06-05 14:04:59.124] AMD-Vi: Skipping host bridge 0000:00:18.3
(XEN) [2014-06-05 14:04:59.140] AMD-Vi: Skipping host bridge 0000:00:18.4
(XEN) [2014-06-05 14:04:59.155] AMD-Vi: Setup I/O page table: device id = 0x400, type = 0x1, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:59.170] AMD-Vi: Setup I/O page table: device id = 0x500, type = 0x3, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:59.186] AMD-Vi: Setup I/O page table: device id = 0x600, type = 0x7, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:59.202] AMD-Vi: Setup I/O page table: device id = 0x700, type = 0x1, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:59.218] AMD-Vi: Setup I/O page table: device id = 0x701, type = 0x1, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:59.234] AMD-Vi: Setup I/O page table: device id = 0x800, type = 0x1, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:59.251] AMD-Vi: Setup I/O page table: device id = 0x900, type = 0x1, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:59.267] AMD-Vi: Setup I/O page table: device id = 0xa00, type = 0x1, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:59.284] AMD-Vi: Setup I/O page table: device id = 0xb00, type = 0x1, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:59.301] AMD-Vi: Setup I/O page table: device id = 0xc00, type = 0x1, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:59.318] AMD-Vi: Setup I/O page table: device id = 0xc01, type = 0x1, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:59.335] AMD-Vi: Setup I/O page table: device id = 0xd00, type = 0x1, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:59.353] AMD-Vi: Setup I/O page table: device id = 0xd01, type = 0x1, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:04:59.375] Scrubbing Free RAM: ...........................................................................................................................................................................................done.
(XEN) [2014-06-05 14:05:04.461] Initial low memory virq threshold set at 0x4000 pages.
(XEN) [2014-06-05 14:05:04.479] Std. Loglevel: All
(XEN) [2014-06-05 14:05:04.496] Guest Loglevel: All
(XEN) [2014-06-05 14:05:04.514] Xen is relinquishing VGA console.
(XEN) [2014-06-05 14:05:04.616] *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) [2014-06-05 14:05:04.616] Freed 284kB init memory.
mapping kernel into physical memory
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.0-rc8-20140604-tip-next-zoltan+ (root@serveerstertje) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Thu Jun 5 00:02:45 CEST 2014
[ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro verbose earlyprintk=xen mem=1536M console=hvc0 console=tty0 vga=794 video=vesafb r8169.use_dac=1 acpi_enforce_resources=lax max_loop=30 loop_max_part=10 debug loglevel=10 nomodeset xen-pciback.hide=(03:06.0)(04:00.*)(06:01.*)(07:00.*)(08:00.*)(0c:00.*) r8169.use_dac=1
[ 0.000000] Freeing 99-100 pfn range: 103 pages freed
[ 0.000000] Released 103 pages of unused memory
[ 0.000000] Set 128975063 page(s) to 1-1 mapping
[ 0.000000] Populating 60000-60067 pfn range: 103 pages added
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000098fff] usable
[ 0.000000] Xen: [mem 0x0000000000099800-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x0000000060066fff] usable
[ 0.000000] Xen: [mem 0x0000000060067000-0x000000009ff8ffff] unusable
[ 0.000000] Xen: [mem 0x000000009ff90000-0x000000009ff9dfff] ACPI data
[ 0.000000] Xen: [mem 0x000000009ff9e000-0x000000009ffdffff] ACPI NVS
[ 0.000000] Xen: [mem 0x000000009ffe0000-0x000000009fffffff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x000000055fffffff] unusable
[ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: user-defined physical RAM map:
[ 0.000000] user: [mem 0x0000000000000000-0x0000000000098fff] usable
[ 0.000000] user: [mem 0x0000000000099800-0x00000000000fffff] reserved
[ 0.000000] user: [mem 0x0000000000100000-0x000000005fffffff] usable
[ 0.000000] user: [mem 0x0000000060067000-0x000000009ff8ffff] unusable
[ 0.000000] user: [mem 0x000000009ff90000-0x000000009ff9dfff] ACPI data
[ 0.000000] user: [mem 0x000000009ff9e000-0x000000009ffdffff] ACPI NVS
[ 0.000000] user: [mem 0x000000009ffe0000-0x000000009fffffff] reserved
[ 0.000000] user: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] user: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] user: [mem 0x0000000100000000-0x000000055fffffff] unusable
[ 0.000000] user: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x60000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000093000] 93000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x5fe00000-0x5fffffff]
[ 0.000000] [mem 0x5fe00000-0x5fffffff] page 4k
[ 0.000000] BRK [0x032ea000, 0x032eafff] PGTABLE
[ 0.000000] BRK [0x032eb000, 0x032ebfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x5c000000-0x5fdfffff]
[ 0.000000] [mem 0x5c000000-0x5fdfffff] page 4k
[ 0.000000] BRK [0x032ec000, 0x032ecfff] PGTABLE
[ 0.000000] BRK [0x032ed000, 0x032edfff] PGTABLE
[ 0.000000] BRK [0x032ee000, 0x032eefff] PGTABLE
[ 0.000000] BRK [0x032ef000, 0x032effff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x5bffffff]
[ 0.000000] [mem 0x00100000-0x5bffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x036f7000-0x04516fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FB100 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x000000009FF90000 000048 (v01 MSI OEMSLIC 20100913 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000009FF90200 000084 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000009FF905E0 009427 (v01 A7640 A7640100 00000100 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009FF9E000 000040
[ 0.000000] ACPI: APIC 0x000000009FF90390 000088 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x000000009FF90420 00003C (v01 7640MS OEMMCFG 20100913 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x000000009FF90460 000176 (v01 MSI OEMSLIC 20100913 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000009FF9E040 000072 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: SRAT 0x000000009FF9A5E0 000108 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 0x000000009FF9A6F0 000038 (v01 7640MS OEMHPET 20100913 MSFT 00000097)
[ 0.000000] ACPI: IVRS 0x000000009FF9A730 000110 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x000000009FF9A840 000DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000005fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x5fffffff]
[ 0.000000] NODE_DATA [mem 0x5fd20000-0x5fd2afff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00098fff]
[ 0.000000] node 0: [mem 0x00100000-0x5fffffff]
[ 0.000000] On node 0 totalpages: 393112
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3992 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6080 pages used for memmap
[ 0.000000] DMA32 zone: 389120 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] e820: [mem 0xa0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.5-unstable (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88005f600000 s87296 r8192 d23296 u262144
[ 0.000000] pcpu-alloc: s87296 r8192 d23296 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] xen: PV spinlocks enabled
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 386947
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro verbose earlyprintk=xen mem=1536M console=hvc0 console=tty0 vga=794 video=vesafb r8169.use_dac=1 acpi_enforce_resources=lax max_loop=30 loop_max_part=10 debug loglevel=10 nomodeset xen-pciback.hide=(03:06.0)(04:00.*)(06:01.*)(07:00.*)(08:00.*)(0c:00.*) r8169.use_dac=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] software IO TLB [mem 0x59c00000-0x5dc00000] (64MB) mapped at [ffff880059c00000-ffff88005dbfffff]
[ 0.000000] Memory: 1424452K/1572448K available (11920K kernel code, 1234K rwdata, 4748K rodata, 1512K init, 14436K bss, 147996K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS:4352 nr_irqs:1272 16
[ 0.000000] xen:events: Using FIFO-based ABI
[ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=1
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 1
[ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
(XEN) [2014-06-05 14:05:04.940] IOAPIC[0]: Set PCI routing entry (6-9 -> 0x60 -> IRQ 9 Mode:1 Active:1)
[ 0.000000] xen: acpi sci 9
[ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10)
[ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11)
[ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14)
[ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15)
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [xenboot0] disabled
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.0-rc8-20140604-tip-next-zoltan+ (root@serveerstertje) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Thu Jun 5 00:02:45 CEST 2014
[ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro verbose earlyprintk=xen mem=1536M console=hvc0 console=tty0 vga=794 video=vesafb r8169.use_dac=1 acpi_enforce_resources=lax max_loop=30 loop_max_part=10 debug loglevel=10 nomodeset xen-pciback.hide=(03:06.0)(04:00.*)(06:01.*)(07:00.*)(08:00.*)(0c:00.*) r8169.use_dac=1
[ 0.000000] Freeing 99-100 pfn range: 103 pages freed
[ 0.000000] 1-1 mapping on 99->100
[ 0.000000] 1-1 mapping on 9ff90->100000
[ 0.000000] 1-1 mapping on 560000->8000000
[ 0.000000] Released 103 pages of unused memory
[ 0.000000] Set 128975063 page(s) to 1-1 mapping
[ 0.000000] Populating 60000-60067 pfn range: 103 pages added
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000098fff] usable
[ 0.000000] Xen: [mem 0x0000000000099800-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x0000000060066fff] usable
[ 0.000000] Xen: [mem 0x0000000060067000-0x000000009ff8ffff] unusable
[ 0.000000] Xen: [mem 0x000000009ff90000-0x000000009ff9dfff] ACPI data
[ 0.000000] Xen: [mem 0x000000009ff9e000-0x000000009ffdffff] ACPI NVS
[ 0.000000] Xen: [mem 0x000000009ffe0000-0x000000009fffffff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x000000055fffffff] unusable
[ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] e820: remove [mem 0x60000000-0xfffffffffffffffe] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: user-defined physical RAM map:
[ 0.000000] user: [mem 0x0000000000000000-0x0000000000098fff] usable
[ 0.000000] user: [mem 0x0000000000099800-0x00000000000fffff] reserved
[ 0.000000] user: [mem 0x0000000000100000-0x000000005fffffff] usable
[ 0.000000] user: [mem 0x0000000060067000-0x000000009ff8ffff] unusable
[ 0.000000] user: [mem 0x000000009ff90000-0x000000009ff9dfff] ACPI data
[ 0.000000] user: [mem 0x000000009ff9e000-0x000000009ffdffff] ACPI NVS
[ 0.000000] user: [mem 0x000000009ffe0000-0x000000009fffffff] reserved
[ 0.000000] user: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] user: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] user: [mem 0x0000000100000000-0x000000055fffffff] unusable
[ 0.000000] user: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x60000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000093000] 93000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x5fe00000-0x5fffffff]
[ 0.000000] [mem 0x5fe00000-0x5fffffff] page 4k
[ 0.000000] BRK [0x032ea000, 0x032eafff] PGTABLE
[ 0.000000] BRK [0x032eb000, 0x032ebfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x5c000000-0x5fdfffff]
[ 0.000000] [mem 0x5c000000-0x5fdfffff] page 4k
[ 0.000000] BRK [0x032ec000, 0x032ecfff] PGTABLE
[ 0.000000] BRK [0x032ed000, 0x032edfff] PGTABLE
[ 0.000000] BRK [0x032ee000, 0x032eefff] PGTABLE
[ 0.000000] BRK [0x032ef000, 0x032effff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x5bffffff]
[ 0.000000] [mem 0x00100000-0x5bffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x036f7000-0x04516fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FB100 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x000000009FF90000 000048 (v01 MSI OEMSLIC 20100913 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000009FF90200 000084 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000009FF905E0 009427 (v01 A7640 A7640100 00000100 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009FF9E000 000040
[ 0.000000] ACPI: APIC 0x000000009FF90390 000088 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x000000009FF90420 00003C (v01 7640MS OEMMCFG 20100913 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x000000009FF90460 000176 (v01 MSI OEMSLIC 20100913 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000009FF9E040 000072 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: SRAT 0x000000009FF9A5E0 000108 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 0x000000009FF9A6F0 000038 (v01 7640MS OEMHPET 20100913 MSFT 00000097)
[ 0.000000] ACPI: IVRS 0x000000009FF9A730 000110 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x000000009FF9A840 000DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000005fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x5fffffff]
[ 0.000000] NODE_DATA [mem 0x5fd20000-0x5fd2afff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00098fff]
[ 0.000000] node 0: [mem 0x00100000-0x5fffffff]
[ 0.000000] On node 0 totalpages: 393112
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3992 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6080 pages used for memmap
[ 0.000000] DMA32 zone: 389120 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0[ 17.018892] crc32c_combine: 8373 self tests passed
[ 17.021657] xen: registering gsi 52 triggering 0 polarity 1
[ 17.021705] xen: --> pirq=52 -> irq=52 (gsi=52)
(XEN) [2014-06-05 14:05:07.191] IOAPIC[1]: Set PCI routing entry (7-28 -> 0x41 -> IRQ 52 Mode:1 Active:1)
[ 17.023898] xen: registering gsi 52 triggering 0 polarity 1
[ 17.023907] Already setup the GSI :52
[ 17.025943] xen: registering gsi 52 triggering 0 polarity 1
[ 17.025950] Already setup the GSI :52
[ 17.028059] xen: registering gsi 53 triggering 0 polarity 1
[ 17.028065] Already setup the GSI :53
[ 17.030436] xen: registering gsi 54 triggering 0 polarity 1
[ 17.030443] Already setup the GSI :54
[ 17.032485] xen: registering gsi 54 triggering 0 polarity 1
[ 17.032491] Already setup the GSI :54
[ 17.035313] xen: registering gsi 16 triggering 0 polarity 1
[ 17.035338] xen: --> pirq=16 -> irq=16 (gsi=16)
(XEN) [2014-06-05 14:05:07.205] IOAPIC[0]: Set PCI routing entry (6-16 -> 0x91 -> IRQ 16 Mode:1 Active:1)
[ 17.036495] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.036825] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 17.036831] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
[ 17.036838] cpcihp_generic: not configured, disabling.
[ 17.037167] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.062617] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
[ 17.063367] usbcore: registered new interface driver udlfb
[ 17.063461] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 17.063466] vesafb: scrolling: redraw
[ 17.063470] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 17.064538] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010580000, using 10240k, total 16384k
[ 17.086913] Console: switching to colour frame buffer device 160x64
[ 17.107234] fb0: VESA VGA frame buffer device
[ 17.108340] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 17.108588] ACPI: Power Button [PWRB]
[ 17.109322] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 17.109512] ACPI: Power Button [PWRF]
[ 17.113165] Warning: Processor Platform Limit not supported.
[ 17.114838] xen:xen_evtchn: Event-channel device installed
[ 17.116752] xen: registering gsi 22 triggering 0 polarity 1
[ 17.116934] xen: --> pirq=22 -> irq=22 (gsi=22)
(XEN) [2014-06-05 14:05:07.287] IOAPIC[0]: Set PCI routing entry (6-22 -> 0xa1 -> IRQ 22 Mode:1 Active:1)
[ 17.142510] xen: registering gsi 40 triggering 0 polarity 1
[ 17.142651] Already setup the GSI :40
[ 18.151456] pciback 0000:04:00.0: restoring config space at offset 0x3c (was 0x100, writing 0x10a)
[ 18.151697] pciback 0000:04:00.0: restoring config space at offset 0x10 (was 0x4, writing 0xfdffe004)
[ 18.151926] pciback 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0x10)
[ 18.152140] pciback 0000:04:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100102)
[ 18.153341] xen: registering gsi 39 triggering 0 polarity 1
[ 18.153479] Already setup the GSI :39
[ 18.178115] pciback 0000:06:01.2: restoring config space at offset 0x4 (was 0x2100000, writing 0x2100112)
[ 18.179336] xen: registering gsi 38 triggering 0 polarity 1
[ 18.179474] Already setup the GSI :38
[ 18.204762] pciback 0000:06:01.1: restoring config space at offset 0x4 (was 0x2100000, writing 0x2100112)
[ 18.205988] xen: registering gsi 37 triggering 0 polarity 1
[ 18.206127] Already setup the GSI :37
[ 18.231407] pciback 0000:06:01.0: restoring config space at offset 0x4 (was 0x2100000, writing 0x2100112)
[ 18.232602] xen: registering gsi 33 triggering 0 polarity 1
[ 18.232760] xen: --> pirq=33 -> irq=33 (gsi=33)
(XEN) [2014-06-05 14:05:08.403] IOAPIC[1]: Set PCI routing entry (7-9 -> 0xa9 -> IRQ 33 Mode:1 Active:1)
[ 18.258673] pciback 0000:07:00.0: enabling device (0000 -> 0003)
[ 18.259211] xen: registering gsi 32 triggering 0 polarity 1
[ 18.259367] xen: --> pirq=32 -> irq=32 (gsi=32)
(XEN) [2014-06-05 14:05:08.429] IOAPIC[1]: Set PCI routing entry (7-8 -> 0xb1 -> IRQ 32 Mode:1 Active:1)
[ 18.285697] xen: registering gsi 47 triggering 0 polarity 1
[ 18.285857] xen: --> pirq=47 -> irq=47 (gsi=47)
(XEN) [2014-06-05 14:05:08.456] IOAPIC[1]: Set PCI routing entry (7-23 -> 0xb9 -> IRQ 47 Mode:1 Active:1)
[ 19.294761] pciback 0000:08:00.0: restoring config space at offset 0x3c (was 0x100, writing 0x10a)
[ 19.295007] pciback 0000:08:00.0: restoring config space at offset 0x10 (was 0x4, writing 0xfe200004)
[ 19.295237] pciback 0000:08:00.0: restoring config space at offset 0xc (was 0x0, writing 0x10)
[ 19.302255] pciback 0000:08:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100106)
[ 19.310213] xen: registering gsi 29 triggering 0 polarity 1
[ 19.317230] xen: --> pirq=29 -> irq=29 (gsi=29)
(XEN) [2014-06-05 14:05:09.494] IOAPIC[1]: Set PCI routing entry (7-5 -> 0xc1 -> IRQ 29 Mode:1 Active:1)
[ 19.348625] pciback 0000:0c:00.0: enabling device (0000 -> 0003)
[ 19.356031] xen: registering gsi 28 triggering 0 polarity 1
[ 19.363073] xen: --> pirq=28 -> irq=28 (gsi=28)
(XEN) [2014-06-05 14:05:09.540] IOAPIC[1]: Set PCI routing entry (7-4 -> 0xc9 -> IRQ 28 Mode:1 Active:1)
[ 19.395461] xen_pciback: backend is vpci
[ 19.405257] xen_acpi_processor: Uploading Xen processor PM info
[ 19.418286] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 19.430679] hpet_acpi_add: no address or irqs in _CRS
[ 19.438227] Linux agpgart interface v0.103
[ 19.447230] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 19.454425] Hangcheck: Using getrawmonotonic().
[ 19.461643] [drm] Initialized drm 1.1.0 20060810
[ 19.468855] [drm] VGACON disable radeon kernel modesetting.
[ 19.475892] [drm:radeon_init] *ERROR* No UMS support in radeon module!
[ 19.503707] brd: module loaded
[ 19.551856] loop: module loaded
[ 19.561212] ahci 0000:00:11.0: version 3.0
[ 19.569799] xen: registering gsi 19 triggering 0 polarity 1
[ 19.576757] xen: --> pirq=19 -> irq=19 (gsi=19)
(XEN) [2014-06-05 14:05:09.753] IOAPIC[0]: Set PCI routing entry (6-19 -> 0xd1 -> IRQ 19 Mode:1 Active:1)
[ 19.584277] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 19.591276] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 19.609423] scsi0 : ahci
[ 19.619320] scsi1 : ahci
[ 19.627412] scsi2 : ahci
[ 19.635480] scsi3 : ahci
[ 19.643502] scsi4 : ahci
[ 19.651470] scsi5 : ahci
[ 19.658535] ata1: SATA max UDMA/133 abar m1024@0xfddff000 port 0xfddff100 irq 127
[ 19.664869] ata2: SATA max UDMA/133 abar m1024@0xfddff000 port 0xfddff180 irq 128
[ 19.671115] ata3: SATA max UDMA/133 abar m1024@0xfddff000 port 0xfddff200 irq 129
[ 19.677301] ata4: SATA max UDMA/133 abar m1024@0xfddff000 port 0xfddff280 irq 130
[ 19.683388] ata5: SATA max UDMA/133 abar m1024@0xfddff000 port 0xfddff300 irq 131
[ 19.689438] ata6: SATA max UDMA/133 abar m1024@0xfddff000 port 0xfddff380 irq 132
[ 19.696021] tun: Universal TUN/TAP device driver, 1.6
[ 19.701944] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 19.708240] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 19.714272] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 19.720595] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 19.726577] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 19.732725] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
[ 19.738659] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 19.744743] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
[ 19.750684] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 19.756831] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 19.763186] xen: registering gsi 46 triggering 0 polarity 1
[ 19.769057] xen: --> pirq=46 -> irq=46 (gsi=46)
(XEN) [2014-06-05 14:05:09.945] IOAPIC[1]: Set PCI routing entry (7-22 -> 0x5a -> IRQ 46 Mode:1 Active:1)
[ 19.774781] r8169 0000:0b:00.0: enabling Mem-Wr-Inval
[ 19.782443] r8169 0000:0b:00.0 eth0: RTL8168d/8111d at 0xffffc90000362000, 40:61:86:f4:67:d9, XID 081000c0 IRQ 135
[ 19.788290] r8169 0000:0b:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 19.794198] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 19.800633] xen: registering gsi 51 triggering 0 polarity 1
[ 19.806445] xen: --> pirq=51 -> irq=51 (gsi=51)
(XEN) [2014-06-05 14:05:09.982] IOAPIC[1]: Set PCI routing entry (7-27 -> 0x6a -> IRQ 51 Mode:1 Active:1)
[ 19.812246] r8169 0000:0a:00.0: enabling Mem-Wr-Inval
[ 19.819829] r8169 0000:0a:00.0 eth1: RTL8168d/8111d at 0xffffc90000364000, 40:61:86:f4:67:d8, XID 081000c0 IRQ 136
[ 19.825773] r8169 0000:0a:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 19.831912] xen_netfront: Initialising Xen virtual ethernet driver
[ 19.838750] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 19.844835] ehci-pci: EHCI PCI platform driver
[ 19.852533] xen: registering gsi 17 triggering 0 polarity 1
[ 19.858522] Already setup the GSI :17
[ 19.864539] QUIRK: Enable AMD PLL fix
[ 19.870419] ehci-pci 0000:00:12.2: enabling bus mastering
[ 19.876411] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 19.883059] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 19.889023] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 19.895046] ehci-pci 0000:00:12.2: debug port 1
[ 19.901241] ehci-pci 0000:00:12.2: enabling Mem-Wr-Inval
[ 19.907346] ehci-pci 0000:00:12.2: irq 17, io mem 0xfddff400
[ 19.921414] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 19.927642] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 19.933390] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.939188] usb usb1: Product: EHCI Host Controller
[ 19.944932] usb usb1: Manufacturer: Linux 3.15.0-rc8-20140604-tip-next-zoltan+ ehci_hcd
[ 19.950741] usb usb1: SerialNumber: 0000:00:12.2
[ 19.958538] hub 1-0:1.0: USB hub found
[ 19.964442] hub 1-0:1.0: 5 ports detected
[ 19.973731] xen: registering gsi 17 triggering 0 polarity 1
[ 19.979566] Already setup the GSI :17
[ 19.985332] ehci-pci 0000:00:13.2: enabling bus mastering
[ 19.991080] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 19.997231] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 20.003061] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 20.009038] ehci-pci 0000:00:13.2: debug port 1
[ 20.014692] ata2: SATA link down (SStatus 0 SControl 300)
[ 20.014801] ata6: SATA link down (SStatus 0 SControl 300)
[ 20.014856] ata5: SATA link down (SStatus 0 SControl 300)
[ 20.014946] ata4: SATA link down (SStatus 0 SControl 300)
[ 20.039100] ehci-pci 0000:00:13.2: enabling Mem-Wr-Inval
[ 20.045112] ehci-pci 0000:00:13.2: irq 17, io mem 0xfddff800
[ 20.058038] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 20.064542] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 20.070765] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.076997] usb usb2: Product: EHCI Host Controller
[ 20.083150] usb usb2: Manufacturer: Linux 3.15.0-rc8-20140604-tip-next-zoltan+ ehci_hcd
[ 20.089380] usb usb2: SerialNumber: 0000:00:13.2
[ 20.097275] hub 2-0:1.0: USB hub found
[ 20.103483] hub 2-0:1.0: 5 ports detected
[ 20.112746] xen: registering gsi 17 triggering 0 polarity 1
[ 20.118827] Already setup the GSI :17
[ 20.124923] ehci-pci 0000:00:16.2: enabling bus mastering
[ 20.130964] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 20.137388] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 20.137563] random: nonblocking pool is initialized
[ 20.149204] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 20.155295] ehci-pci 0000:00:16.2: debug port 1
[ 20.161489] ehci-pci 0000:00:16.2: enabling Mem-Wr-Inval
[ 20.167441] ehci-pci 0000:00:16.2: irq 17, io mem 0xfddffc00
[ 20.181456] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 20.181499] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 20.182007] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 20.182008] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.182009] usb usb3: Product: EHCI Host Controller
[ 20.182010] usb usb3: Manufacturer: Linux 3.15.0-rc8-20140604-tip-next-zoltan+ ehci_hcd
[ 20.182011] usb usb3: SerialNumber: 0000:00:16.2
[ 20.183668] hub 3-0:1.0: USB hub found
[ 20.183753] hub 3-0:1.0: 4 ports detected
[ 20.185371] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 20.185390] ohci-pci: OHCI PCI platform driver
[ 20.187195] xen: registering gsi 18 triggering 0 polarity 1
[ 20.187199] Already setup the GSI :18
[ 20.187281] ohci-pci 0000:00:12.0: enabling bus mastering
[ 20.187294] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 20.187797] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 20.188151] ohci-pci 0000:00:12.0: irq 18, io mem 0xfddf7000
[ 20.245792] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.245794] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.245795] usb usb4: Product: OHCI PCI host controller
[ 20.245796] usb usb4: Manufacturer: Linux 3.15.0-rc8-20140604-tip-next-zoltan+ ohci_hcd
[ 20.245796] usb usb4: SerialNumber: 0000:00:12.0
[ 20.247469] hub 4-0:1.0: USB hub found
[ 20.247557] hub 4-0:1.0: 5 ports detected
[ 20.250961] xen: registering gsi 18 triggering 0 polarity 1
[ 20.250964] Already setup the GSI :18
[ 20.251046] ohci-pci 0000:00:13.0: enabling bus mastering
[ 20.251051] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 20.251570] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 20.251749] ohci-pci 0000:00:13.0: irq 18, io mem 0xfddfc000
[ 20.309018] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.309019] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.309020] usb usb5: Product: OHCI PCI host controller
[ 20.309021] usb usb5: Manufacturer: Linux 3.15.0-rc8-20140604-tip-next-zoltan+ ohci_hcd
[ 20.309022] usb usb5: SerialNumber: 0000:00:13.0
[ 20.310639] hub 5-0:1.0: USB hub found
[ 20.310725] hub 5-0:1.0: 5 ports detected
[ 20.314043] xen: registering gsi 18 triggering 0 polarity 1
[ 20.314046] Already setup the GSI :18
[ 20.314126] ohci-pci 0000:00:14.5: enabling bus mastering
[ 20.314133] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 20.314638] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 20.314803] ohci-pci 0000:00:14.5: irq 18, io mem 0xfddfd000
[ 20.372416] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.372418] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.372419] usb usb6: Product: OHCI PCI host controller
[ 20.372420] usb usb6: Manufacturer: Linux 3.15.0-rc8-20140604-tip-next-zoltan+ ohci_hcd
[ 20.372421] usb usb6: SerialNumber: 0000:00:14.5
[ 20.374049] hub 6-0:1.0: USB hub found
[ 20.374135] hub 6-0:1.0: 2 ports detected
[ 20.376934] xen: registering gsi 18 triggering 0 polarity 1
[ 20.376937] Already setup the GSI :18
[ 20.377018] ohci-pci 0000:00:16.0: enabling bus mastering
[ 20.377024] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 20.377525] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 20.377737] ohci-pci 0000:00:16.0: irq 18, io mem 0xfddfe000
[ 20.432455] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.432456] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.432457] usb usb7: Product: OHCI PCI host controller
[ 20.432458] usb usb7: Manufacturer: Linux 3.15.0-rc8-20140604-tip-next-zoltan+ ohci_hcd
[ 20.432459] usb usb7: SerialNumber: 0000:00:16.0
[ 20.434092] hub 7-0:1.0: USB hub found
[ 20.434177] hub 7-0:1.0: 4 ports detected
[ 20.435792] uhci_hcd: USB Universal Host Controller Interface driver
[ 20.437295] xen: registering gsi 48 triggering 0 polarity 1
[ 20.437298] Already setup the GSI :48
[ 20.437345] xhci_hcd 0000:09:00.0: enabling bus mastering
[ 20.437350] xhci_hcd 0000:09:00.0: xHCI Host Controller
[ 20.437912] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 8
[ 20.438340] xhci_hcd 0000:09:00.0: enabling Mem-Wr-Inval
[ 20.440687] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 20.440688] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.440689] usb usb8: Product: xHCI Host Controller
[ 20.440690] usb usb8: Manufacturer: Linux 3.15.0-rc8-20140604-tip-next-zoltan+ xhci_hcd
[ 20.440691] usb usb8: SerialNumber: 0000:09:00.0
[ 20.442467] hub 8-0:1.0: USB hub found
[ 20.442591] hub 8-0:1.0: 2 ports detected
[ 20.443773] xhci_hcd 0000:09:00.0: xHCI Host Controller
[ 20.444273] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 9
[ 20.444874] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 20.444875] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.444876] usb usb9: Product: xHCI Host Controller
[ 20.444877] usb usb9: Manufacturer: Linux 3.15.0-rc8-20140604-tip-next-zoltan+ xhci_hcd
[ 20.444878] usb usb9: SerialNumber: 0000:09:00.0
[ 20.446773] hub 9-0:1.0: USB hub found
[ 20.446872] hub 9-0:1.0: 2 ports detected
[ 20.448566] usbcore: registered new interface driver usblp
[ 20.448799] usbcore: registered new interface driver usb-storage
[ 20.449131] usbcore: registered new interface driver usbserial
[ 20.449259] usbcore: registered new interface driver cp210x
[ 20.449499] usbserial: USB Serial support registered for cp210x
[ 20.449630] usbcore: registered new interface driver cypress_m8
[ 20.449750] usbserial: USB Serial support registered for DeLorme Earthmate USB
[ 20.449868] usbserial: USB Serial support registered for HID->COM RS232 Adapter
[ 20.450008] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
[ 20.450135] usbcore: registered new interface driver mos7720
[ 20.450256] usbserial: USB Serial support registered for Moschip 2 port adapter
[ 20.450387] usbcore: registered new interface driver mos7840
[ 20.450512] usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[ 20.450873] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 20.451870] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.451962] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 20.453408] mousedev: PS/2 mouse device common for all mice
[ 20.455101] rtc_cmos 00:02: RTC can wake from S4
[ 20.456071] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 20.456178] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[ 20.457225] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SOR1) (20140424/utaddress-258)
[ 20.457233] ACPI: This conflict may cause random problems and system instability
[ 20.457234] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.457257] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 20.457646] ACPI Warning: SystemIO range 0x0000000000000b20-0x0000000000000b27 conflicts with OpRegion 0x0000000000000b20-0x0000000000000b2f (\SOR2) (20140424/utaddress-258)
[ 20.457652] ACPI: This conflict may cause random problems and system instability
[ 20.457652] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.457659] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 20.458926] lirc_dev: IR Remote Control driver registered, major 248
[ 20.458945] IR NEC protocol handler initialized
[ 20.458946] IR RC5(x) protocol handler initialized
[ 20.458947] IR RC6 protocol handler initialized
[ 20.458948] IR JVC protocol handler initialized
[ 20.458948] IR Sony protocol handler initialized
[ 20.458949] IR RC5 (streamzap) protocol handler initialized
[ 20.458950] IR SANYO protocol handler initialized
[ 20.458950] IR Sharp protocol handler initialized
[ 20.458951] IR MCE Keyboard/mouse protocol handler initialized
[ 20.458952] IR LIRC bridge handler initialized
[ 20.458952] cx25821: driver version 0.0.106 loaded
[ 20.459649] usbcore: registered new interface driver pvrusb2
[ 20.459650] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner
[ 20.459651] pvrusb2: Debug mask is 31 (0x1f)
[ 20.459816] f71805f: Unsupported Fintek device, skipping
[ 20.459917] f71882fg: Found f71889ed chip at 0x600, revision 16
[ 20.460058] ACPI Warning: SystemIO range 0x0000000000000600-0x0000000000000607 conflicts with OpRegion 0x0000000000000605-0x0000000000000606 (\HMOR) (20140424/utaddress-258)
[ 20.460063] ACPI: This conflict may cause random problems and system instability
[ 20.460063] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.461309] f71882fg f71882fg.1536: Fan: 1 is in duty-cycle mode
[ 20.461697] f71882fg f71882fg.1536: Fan: 2 is in duty-cycle mode
[ 20.462047] f71882fg f71882fg.1536: Fan: 3 is in duty-cycle mode
[ 20.595421] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 20.595770] sp5100_tco: PCI Revision ID: 0x41
[ 20.595853] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 20.595888] sp5100_tco: Last reboot was not triggered by watchdog.
[ 20.596298] sp5100_tco: initialized (0xffffc9000037ab00). heartbeat=60 sec (nowayout=0)
[ 20.596303] xen_wdt: Xen WatchDog Timer Driver v0.01
[ 20.596654] xen_wdt: cannot register miscdev on minor=130 (-16)
[ 20.596686] wdt: probe of wdt failed with error -16
[ 20.600476] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 20.604428] device-mapper: cache-policy-mq: version 1.2.0 loaded
[ 20.604429] device-mapper: cache cleaner: version 1.0.0 loaded
[ 20.604430] Bluetooth: Virtual HCI driver ver 1.4
[ 20.604875] Bluetooth: HCI UART driver ver 2.2
[ 20.604878] Bluetooth: HCI H4 protocol initialized
[ 20.604879] Bluetooth: HCI BCSP protocol initialized
[ 20.604879] Bluetooth: HCILL protocol initialized
[ 20.604880] Bluetooth: HCIATH3K protocol initialized
[ 20.604880] Bluetooth: HCI Three-wire UART (H5) protocol initialized
[ 20.605094] usbcore: registered new interface driver bcm203x
[ 20.605322] usbcore: registered new interface driver bpa10x
[ 20.605528] usbcore: registered new interface driver bfusb
[ 20.605759] usbcore: registered new interface driver btusb
[ 20.605967] usbcore: registered new interface driver ath3k
[ 20.701480] usb 4-5: new full-speed USB device number 2 using ohci-pci
[ 21.128581] usb 4-5: New USB device found, idVendor=0a12, idProduct=0001
[ 21.128583] usb 4-5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 21.128585] usb 4-5: Product: EDRClassone
[ 21.215130] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
(XEN) [2014-06-05 14:05:11.394] IOAPIC[1]: Set PCI routing entry (7-1 -> 0xba -> IRQ 25 Mode:1 Active:1)
[ 21.215185] hidraw: raw HID events driver (C) Jiri Kosina
[ 21.216987] usbcore: registered new interface driver usbhid
[ 21.216988] usbhid: USB HID core driver
[ 21.222406] xen: registering gsi 16 triggering 0 polarity 1
[ 21.222412] Already setup the GSI :16
[ 21.223784] xen: registering gsi 25 triggering 0 polarity 1
[ 21.223825] xen: --> pirq=25 -> irq=25 (gsi=25)
[ 21.225178] usbcore: registered new interface driver snd-usb-audio
[ 21.225411] usbcore: registered new interface driver snd-ua101
[ 21.225715] usbcore: registered new interface driver snd-usb-usx2y
[ 21.226006] usbcore: registered new interface driver snd-usb-caiaq
[ 21.226257] usbcore: registered new interface driver snd-usb-6fire
[ 21.226356] Netfilter messages via NETLINK v0.30.[ 27.241649] udevd[2030]: starting version 175
[ 28.448146] ata1.00: configured for UDMA/133
[ 28.454517] ata1: EH complete
[ 29.981612] ata1.00: configured for UDMA/133
[ 29.987838] ata1: EH complete
[ 31.261666] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 31.946679] EXT4-fs (dm-0): re-mounted. Opts: barrier=1,errors=remount-ro
[ 43.303960] Adding 2097148k swap on /dev/mapper/serveerstertje-swap. Priority:-1 extents:1 across:2097148k
[ 63.931862] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro
[ 66.676020] r8169 0000:0b:00.0 eth0: link down
[ 66.676189] r8169 0000:0b:00.0 eth0: link down
[ 67.266014] r8169 0000:0a:00.0 eth1: link down
[ 67.266040] r8169 0000:0a:00.0 eth1: link down
[ 68.599859] r8169 0000:0b:00.0 eth0: link up
[ 69.862774] r8169 0000:0a:00.0 eth1: link up
[ 87.119802] ipt_ULOG: ULOG is deprecated and it will be removed soon, use NFLOG instead
[ 119.005981] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro
[ 128.165631] EXT4-fs (dm-43): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro
[ 139.129292] EXT4-fs (dm-44): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro
[ 148.528852] EXT4-fs (dm-45): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro
[ 157.895988] EXT4-fs (dm-46): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro
[ 167.222959] EXT4-fs (dm-47): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro
[ 177.027586] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro
(XEN) [2014-06-05 14:08:59.784] AMD-Vi: Share p2m table with iommu: p2m table = 0x546331
[ 250.806868] device vif1.0 entered promiscuous mode
[ 251.222701] device vif1.0-emu entered promiscuous mode
[ 251.243006] xen_bridge: port 2(vif1.0-emu) entered forwarding state
[ 251.253870] xen_bridge: port 2(vif1.0-emu) entered forwarding state
[ 251.391776] pciback 0000:07:00.0: restoring config space at offset 0x4 (was 0x100400, writing 0x100000)
(XEN) [2014-06-05 14:09:01.292] io.c:280: d1: bind: m_gsi=32 g_gsi=36 device=5 intx=0
(XEN) [2014-06-05 14:09:01.299] AMD-Vi: Disable: device id = 0x700, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:09:01.299] AMD-Vi: Setup I/O page table: device id = 0x700, type = 0x1, root table = 0x546331000, domain = 1, paging mode = 4
(XEN) [2014-06-05 14:09:01.299] AMD-Vi: Re-assign 0000:07:00.0 from dom0 to dom1
[ 251.458649] xen_pciback: vpci: 0000:07:00.0: assign to virtual slot 0
(d1) [2014-06-05 14:09:01.342] HVM Loader
(d1) [2014-06-05 14:09:01.342] Detected Xen v4.5-unstable
(d1) [2014-06-05 14:09:01.342] Xenbus rings @0xfeffc000, event channel 1
(d1) [2014-06-05 14:09:01.343] System requested SeaBIOS
(d1) [2014-06-05 14:09:01.343] CPU speed is 3200 MHz
(d1) [2014-06-05 14:09:01.343] Relocating guest memory for lowmem MMIO space disabled
(XEN) [2014-06-05 14:09:01.343] irq.c:270: Dom1 PCI link 0 changed 0 -> 5
(d1) [2014-06-05 14:09:01.343] PCI-ISA link 0 routed to IRQ5
(XEN) [2014-06-05 14:09:01.344] irq.c:270: Dom1 PCI link 1 changed 0 -> 10
(d1) [2014-06-05 14:09:01.344] PCI-ISA link 1 routed to IRQ10
(XEN) [2014-06-05 14:09:01.344] irq.c:270: Dom1 PCI link 2 changed 0 -> 11
(d1) [2014-06-05 14:09:01.344] PCI-ISA link 2 routed to IRQ11
(XEN) [2014-06-05 14:09:01.344] irq.c:270: Dom1 PCI link 3 changed 0 -> 5
(d1) [2014-06-05 14:09:01.345] PCI-ISA link 3 routed to IRQ5
(d1) [2014-06-05 14:09:01.372] pci dev 01:2 INTD->IRQ5
(d1) [2014-06-05 14:09:01.379] pci dev 01:3 INTA->IRQ10
(d1) [2014-06-05 14:09:01.385] pci dev 02:0 INTA->IRQ11
(d1) [2014-06-05 14:09:01.398] pci dev 04:0 INTA->IRQ5
(d1) [2014-06-05 14:09:01.405] pci dev 05:0 INTA->IRQ10
(d1) [2014-06-05 14:09:01.466] No RAM in high memory; setting high_mem resource base to 100000000
(d1) [2014-06-05 14:09:01.466] pci dev 05:0 bar 10 size 010000000: 0e000000c
(XEN) [2014-06-05 14:09:01.466] memory_map:add: dom1 gfn=e0000 mfn=a0000 nr=10000
(d1) [2014-06-05 14:09:01.527] pci dev 03:0 bar 10 size 002000000: 0f0000008
(d1) [2014-06-05 14:09:01.529] pci dev 02:0 bar 14 size 001000000: 0f2000008
(d1) [2014-06-05 14:09:01.530] pci dev 04:0 bar 30 size 000040000: 0f3000000
(d1) [2014-06-05 14:09:01.533] pci dev 04:0 bar 10 size 000020000: 0f3040000
(XEN) [2014-06-05 14:09:01.533] memory_map:add: dom1 gfn=f3060 mfn=fe1c0 nr=20
(d1) [2014-06-05 14:09:01.537] pci dev 05:0 bar 18 size 000020000: 0f3060004
(d1) [2014-06-05 14:09:01.537] pci dev 05:0 bar 30 size 000020000: 0f3080000
(d1) [2014-06-05 14:09:01.538] pci dev 03:0 bar 30 size 000010000: 0f30a0000
(d1) [2014-06-05 14:09:01.540] pci dev 03:0 bar 14 size 000001000: 0f30b0000
(d1) [2014-06-05 14:09:01.540] pci dev 02:0 bar 10 size 000000100: 00000c001
(d1) [2014-06-05 14:09:01.543] pci dev 05:0 bar 20 size 000000100: 00000c101
(XEN) [2014-06-05 14:09:01.543] ioport_map:add: dom1 gport=c100 mport=a000 nr=100
(d1) [2014-06-05 14:09:01.547] pci dev 04:0 bar 14 size 000000040: 00000c201
(d1) [2014-06-05 14:09:01.549] pci dev 01:2 bar 20 size 000000020: 00000c241
(d1) [2014-06-05 14:09:01.552] pci dev 01:1 bar 20 size 000000010: 00000c261
(d1) [2014-06-05 14:09:01.554] Multiprocessor initialisation:
(d1) [2014-06-05 14:09:01.575] - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs [1/8] ... done.
(d1) [2014-06-05 14:09:01.596] - CPU1 ... 48-bit phys ... fixed MTRRs ... var MTRRs [1/8] ... done.
(d1) [2014-06-05 14:09:01.621] - CPU2 ... 48-bit phys ... fixed MTRRs ... var MTRRs [1/8] ... done.
(d1) [2014-06-05 14:09:01.621] Testing HVM environment:
(d1) [2014-06-05 14:09:01.629] - REP INSB across page boundaries ... passed
(d1) [2014-06-05 14:09:01.633] - GS base MSRs and SWAPGS ... passed
(d1) [2014-06-05 14:09:01.633] Passed 2 of 2 tests
(d1) [2014-06-05 14:09:01.633] Writing SMBIOS tables ...
(d1) [2014-06-05 14:09:01.634] Loading SeaBIOS ...
(d1) [2014-06-05 14:09:01.634] Creating MP tables ...
(d1) [2014-06-05 14:09:01.634] Loading ACPI ...
(d1) [2014-06-05 14:09:01.635] vm86 TSS at fc00a200
(d1) [2014-06-05 14:09:01.636] BIOS map:
(d1) [2014-06-05 14:09:01.636] 10000-100d3: Scratch space
(d1) [2014-06-05 14:09:01.636] c0000-fffff: Main BIOS
(d1) [2014-06-05 14:09:01.636] E820 table:
(d1) [2014-06-05 14:09:01.636] [00]: 00000000:00000000 - 00000000:000a0000: RAM
(d1) [2014-06-05 14:09:01.636] HOLE: 00000000:000a0000 - 00000000:000c0000
(d1) [2014-06-05 14:09:01.636] [01]: 00000000:000c0000 - 00000000:00100000: RESERVED
(d1) [2014-06-05 14:09:01.636] [02]: 00000000:00100000 - 00000000:3f800000: RAM
(d1) [2014-06-05 14:09:01.636] HOLE: 00000000:3f800000 - 00000000:fc000000
(d1) [2014-06-05 14:09:01.636] [03]: 00000000:fc000000 - 00000001:00000000: RESERVED
(d1) [2014-06-05 14:09:01.636] Invoking SeaBIOS ...
(d1) [2014-06-05 14:09:01.640] SeaBIOS (version rel-1.7.5-0-ge51488c-20140604_174715-serveerstertje)
(d1) [2014-06-05 14:09:01.640]
(d1) [2014-06-05 14:09:01.640] Found Xen hypervisor signature at 40000000
(d1) [2014-06-05 14:09:01.640] Running on QEMU (i440fx)
(d1) [2014-06-05 14:09:01.640] xen: copy e820...
(d1) [2014-06-05 14:09:01.640] Relocating init from 0x000df629 to 0x3f7ae600 (size 71995)
(d1) [2014-06-05 14:09:01.643] CPU Mhz=3201
(d1) [2014-06-05 14:09:01.650] Found 9 PCI devices (max PCI bus is 00)
(d1) [2014-06-05 14:09:01.650] Allocated Xen hypercall page at 3f7ff000
(d1) [2014-06-05 14:09:01.650] Detected Xen v4.5-unstable
(d1) [2014-06-05 14:09:01.650] xen: copy BIOS tables...
(d1) [2014-06-05 14:09:01.650] Copying SMBIOS entry point from 0x00010010 to 0x000f0f50
(d1) [2014-06-05 14:09:01.650] Copying MPTABLE from 0xfc001190/fc0011a0 to 0x000f0e40
(d1) [2014-06-05 14:09:01.650] Copying PIR from 0x00010030 to 0x000f0dc0
(d1) [2014-06-05 14:09:01.650] Copying ACPI RSDP from 0x000100b0 to 0x000f0d90
(d1) [2014-06-05 14:09:01.650] Using pmtimer, ioport 0xb008
(d1) [2014-06-05 14:09:01.650] Scan for VGA option rom
(d1) [2014-06-05 14:09:01.665] Running option rom at c000:0003
(XEN) [2014-06-05 14:09:01.678] stdvga.c:147:d1v0 entering stdvga and caching modes
(d1) [2014-06-05 14:09:01.698] pmm call arg1=0
(d1) [2014-06-05 14:09:01.699] Turning on vga text mode console
(d1) [2014-06-05 14:09:01.828] SeaBIOS (version rel-1.7.5-0-ge51488c-20140604_174715-serveerstertje)
(d1) [2014-06-05 14:09:01.844] Machine UUID 29d477db-b545-45b7-86f5-0622757f3fce
(d1) [2014-06-05 14:09:01.845] UHCI init on dev 00:01.2 (io=c240)
(d1) [2014-06-05 14:09:01.847] Found 0 lpt ports
(d1) [2014-06-05 14:09:01.848] Found 1 serial ports
(d1) [2014-06-05 14:09:01.848] ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
(d1) [2014-06-05 14:09:01.849] ATA controller 2 at 170/374/0 (irq 15 dev 9)
(d1) [2014-06-05 14:09:01.853] ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (20480 MiBytes)
(d1) [2014-06-05 14:09:01.853] Searching bootorder for: /pci@i0cf8/*@1,1/drive@0/disk@0
(d1) [2014-06-05 14:09:01.953] PS2 keyboard initialized
(d1) [2014-06-05 14:09:01.953] All threads complete.
(d1) [2014-06-05 14:09:01.953] Scan for option roms
(d1) [2014-06-05 14:09:01.976] Running option rom at c980:0003
(d1) [2014-06-05 14:09:01.984] pmm call arg1=1
(d1) [2014-06-05 14:09:01.984] pmm call arg1=0
(d1) [2014-06-05 14:09:01.986] pmm call arg1=1
(d1) [2014-06-05 14:09:01.986] pmm call arg1=0
(d1) [2014-06-05 14:09:02.007] Searching bootorder for: /pci@i0cf8/*@4
(d1) [2014-06-05 14:09:02.007]
(d1) [2014-06-05 14:09:02.015] Press F12 for boot menu.
(d1) [2014-06-05 14:09:02.016]
(d1) [2014-06-05 14:09:04.554] Searching bootorder for: HALT
(d1) [2014-06-05 14:09:04.554] drive 0x000f0d40: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=41943040
(d1) [2014-06-05 14:09:04.555] Space available for UMB: ca800-ef000, f0000-f0d40
(d1) [2014-06-05 14:09:04.555] Returned 258048 bytes of ZoneHigh
(d1) [2014-06-05 14:09:04.555] e820 map has 6 items:
(d1) [2014-06-05 14:09:04.555] 0: 0000000000000000 - 000000000009fc00 = 1 RAM
(d1) [2014-06-05 14:09:04.555] 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
(d1) [2014-06-05 14:09:04.555] 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
(d1) [2014-06-05 14:09:04.556] 3: 0000000000100000 - 000000003f7ff000 = 1 RAM
(d1) [2014-06-05 14:09:04.556] 4: 000000003f7ff000 - 000000003f800000 = 2 RESERVED
(d1) [2014-06-05 14:09:04.556] 5: 00000000fc000000 - 0000000100000000 = 2 RESERVED
(d1) [2014-06-05 14:09:04.559] enter handle_19:
(d1) [2014-06-05 14:09:04.559] NULL
(d1) [2014-06-05 14:09:04.585] Booting from Hard Disk...
(d1) [2014-06-05 14:09:04.587] Booting from 0000:7c00
[ 266.272439] xen_bridge: port 2(vif1.0-emu) entered forwarding state
(XEN) [2014-06-05 14:09:35.418] irq.c:374: Dom1 callback via changed to Direct Vector 0xf3
(XEN) [2014-06-05 14:09:41.953] memory_map:remove: dom1 gfn=e0000 mfn=a0000 nr=10000
(XEN) [2014-06-05 14:09:42.095] memory_map:remove: dom1 gfn=f3060 mfn=fe1c0 nr=20
(XEN) [2014-06-05 14:09:42.098] ioport_map:remove: dom1 gport=c100 mport=a000 nr=100
(XEN) [2014-06-05 14:09:42.102] memory_map:add: dom1 gfn=e0000 mfn=a0000 nr=10000
(XEN) [2014-06-05 14:09:42.176] memory_map:add: dom1 gfn=f3060 mfn=fe1c0 nr=20
(XEN) [2014-06-05 14:09:42.178] ioport_map:add: dom1 gport=c100 mport=a000 nr=100
(XEN) [2014-06-05 14:09:42.182] memory_map:remove: dom1 gfn=e0000 mfn=a0000 nr=10000
(XEN) [2014-06-05 14:09:42.322] memory_map:remove: dom1 gfn=f3060 mfn=fe1c0 nr=20
(XEN) [2014-06-05 14:09:42.324] ioport_map:remove: dom1 gport=c100 mport=a000 nr=100
(XEN) [2014-06-05 14:09:42.328] memory_map:add: dom1 gfn=e0000 mfn=a0000 nr=10000
(XEN) [2014-06-05 14:09:42.389] memory_map:add: dom1 gfn=f3060 mfn=fe1c0 nr=20
(XEN) [2014-06-05 14:09:42.391] ioport_map:add: dom1 gport=c100 mport=a000 nr=100
(XEN) [2014-06-05 14:09:42.395] memory_map:remove: dom1 gfn=e0000 mfn=a0000 nr=10000
(XEN) [2014-06-05 14:09:42.526] memory_map:remove: dom1 gfn=f3060 mfn=fe1c0 nr=20
(XEN) [2014-06-05 14:09:42.528] ioport_map:remove: dom1 gport=c100 mport=a000 nr=100
(XEN) [2014-06-05 14:09:42.533] memory_map:add: dom1 gfn=e0000 mfn=a0000 nr=10000
(XEN) [2014-06-05 14:09:42.607] memory_map:add: dom1 gfn=f3060 mfn=fe1c0 nr=20
(XEN) [2014-06-05 14:09:42.610] ioport_map:add: dom1 gport=c100 mport=a000 nr=100
(XEN) [2014-06-05 14:09:42.613] memory_map:remove: dom1 gfn=e0000 mfn=a0000 nr=10000
(XEN) [2014-06-05 14:09:42.741] memory_map:remove: dom1 gfn=f3060 mfn=fe1c0 nr=20
(XEN) [2014-06-05 14:09:42.744] ioport_map:remove: dom1 gport=c100 mport=a000 nr=100
(XEN) [2014-06-05 14:09:42.748] memory_map:add: dom1 gfn=e0000 mfn=a0000 nr=10000
(XEN) [2014-06-05 14:09:42.812] memory_map:add: dom1 gfn=f3060 mfn=fe1c0 nr=20
(XEN) [2014-06-05 14:09:42.814] ioport_map:add: dom1 gport=c100 mport=a000 nr=100
(XEN) [2014-06-05 14:09:42.818] memory_map:remove: dom1 gfn=e0000 mfn=a0000 nr=10000
(XEN) [2014-06-05 14:09:42.949] memory_map:remove: dom1 gfn=f3060 mfn=fe1c0 nr=20
(XEN) [2014-06-05 14:09:42.952] ioport_map:remove: dom1 gport=c100 mport=a000 nr=100
(XEN) [2014-06-05 14:09:42.957] memory_map:add: dom1 gfn=e0000 mfn=a0000 nr=10000
(XEN) [2014-06-05 14:09:43.031] memory_map:add: dom1 gfn=f3060 mfn=fe1c0 nr=20
(XEN) [2014-06-05 14:09:43.033] ioport_map:add: dom1 gport=c100 mport=a000 nr=100
(XEN) [2014-06-05 14:09:43.074] irq.c:270: Dom1 PCI link 0 changed 5 -> 0
(XEN) [2014-06-05 14:09:43.097] irq.c:270: Dom1 PCI link 1 changed 10 -> 0
(XEN) [2014-06-05 14:09:43.121] irq.c:270: Dom1 PCI link 2 changed 11 -> 0
(XEN) [2014-06-05 14:09:43.145] irq.c:270: Dom1 PCI link 3 changed 5 -> 0
(XEN) [2014-06-05 14:09:45.767] memory_map:add: dom1 gfn=f3080 mfn=fe1a0 nr=20
(XEN) [2014-06-05 14:09:45.892] memory_map:remove: dom1 gfn=f3080 mfn=fe1a0 nr=20
[ 297.999064] xen-blkback:ring-ref 8, event-channel 26, protocol 1 (x86_64-abi) persistent grants
[ 299.471196] xen_bridge: port 1(vif1.0) entered forwarding state
[ 299.481670] xen_bridge: port 1(vif1.0) entered forwarding state
[ 314.509935] xen_bridge: port 1(vif1.0) entered forwarding state
[ 362.158625] xen_bridge: port 1(vif1.0) entered disabled state
(XEN) [2014-06-05 14:10:52.042] io.c:305: d1: unbind: m_gsi=87 g_gsi=16 device=0 intx=0
(XEN) [2014-06-05 14:10:52.042] io.c:363: d1 unmap: m_irq=87 device=0 intx=0
[ 362.213940] xen_bridge: port 2(vif1.0-emu) entered disabled state
[ 362.224200] device vif1.0-emu left promiscuous mode
[ 362.233915] xen_bridge: port 2(vif1.0-emu) entered disabled state
[ 362.312678] xen_bridge: port 1(vif1.0) entered disabled state
[ 362.330860] device vif1.0 left promiscuous mode
[ 362.340738] xen_bridge: port 1(vif1.0) entered disabled state
[ 362.417490] pciback 0000:07:00.0: restoring config space at offset 0x4 (was 0x100400, writing 0x100007)
(XEN) [2014-06-05 14:10:54.290] AMD-Vi: Disable: device id = 0x700, domain = 1, paging mode = 4
(XEN) [2014-06-05 14:10:54.290] AMD-Vi: Setup I/O page table: device id = 0x700, type = 0x1, root table = 0x54ef41000, domain = 0, paging mode = 3
(XEN) [2014-06-05 14:10:54.290] AMD-Vi: Re-assign 0000:07:00.0 from dom1 to dom0
(XEN) [2014-06-05 14:10:54.650] ----[ Xen-4.5-unstable x86_64 debug=y Not tainted ]----
(XEN) [2014-06-05 14:10:54.650] CPU: 5
(XEN) [2014-06-05 14:10:54.650] RIP: e008:[<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf
(XEN) [2014-06-05 14:10:54.650] RFLAGS: 0000000000010202 CONTEXT: hypervisor
(XEN) [2014-06-05 14:10:54.650] rax: 0000000000000019 rbx: 0000000000000320 rcx: 0000000000000001
(XEN) [2014-06-05 14:10:54.650] rdx: ffff83054ef86020 rsi: 0000000000000200 rdi: ffff8305416eb0bc
(XEN) [2014-06-05 14:10:54.650] rbp: ffff83054ef7fce8 rsp: ffff83054ef7fcc8 r8: 0000000000000001
(XEN) [2014-06-05 14:10:54.650] r9: 000000000000003a r10: ffff82e008e31940 r11: 0000000000000001
(XEN) [2014-06-05 14:10:54.650] r12: ffff8305416eb000 r13: ffff82d08023d740 r14: ffff8305416eb0b8
(XEN) [2014-06-05 14:10:54.650] r15: ffffffffffffffff cr0: 000000008005003b cr4: 00000000000006f0
(XEN) [2014-06-05 14:10:54.650] cr3: 0000000537296000 cr2: 0000000000000328
(XEN) [2014-06-05 14:10:54.650] ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e010 cs: e008
(XEN) [2014-06-05 14:10:54.650] Xen stack trace from rsp=ffff83054ef7fcc8:
(XEN) [2014-06-05 14:10:54.650] ffff83009faf7000 0000000000000000 ffff830546cb6ee0 ffff83054eff8d00
(XEN) [2014-06-05 14:10:54.650] ffff83054ef7fd68 ffff82d080126e2f ffff83054ef7fd48 ffff830546df8ef0
(XEN) [2014-06-05 14:10:54.650] 00000000416eb1c0 ffff830546333870 ffff8305416eb000 ffff82d080320d60
(XEN) [2014-06-05 14:10:54.650] ffff82d080277d20 ffff83054eff1068 0000000000000000 ffff8305416eb000
(XEN) [2014-06-05 14:10:54.650] ffff8305416eb000 0000000000000000 0000000000000000 0000000000000011
(XEN) [2014-06-05 14:10:54.650] ffff83054ef7fd98 ffff82d080105dcc ffff82d080129dcf ffff8305416eb000
(XEN) [2014-06-05 14:10:54.650] ffffffffffffffff 00007f9b40a0b004 ffff83054ef7fef8 ffff82d080103926
(XEN) [2014-06-05 14:10:54.650] ffff83054ef913a0 0000000000000282 ffff8305480e1010 ffff83009fd27000
(XEN) [2014-06-05 14:10:54.650] 0000000000000000 ffff83009fd2718c 0000000000000246 0000000000000011
(XEN) [2014-06-05 14:10:54.650] ffff83054ef7fdf8 0000000000000206 ffff83054ef7fe18 ffff82d08012c757
(XEN) [2014-06-05 14:10:54.650] ffff83009fd27060 0000000000000005 ffff83054ef7fe68 0000000000000206
(XEN) [2014-06-05 14:10:54.650] ffff83009fd27088 0000000000000286 0000000a00000002 0000000000000001
(XEN) [2014-06-05 14:10:54.650] 0000000001eb2168 0000000001eb16a0 00007f9b4037c000 00007f9b407fc9f2
(XEN) [2014-06-05 14:10:54.650] 35622d6200000005 0000000000000000 00007fff2b72c740 00007f9b40158620
(XEN) [2014-06-05 14:10:54.650] 0000000000000010 0000000001ea8330 00007fff2b72c7b0 0000000001eb1e40
(XEN) [2014-06-05 14:10:54.650] 0000000000000001 00007f9b40802a55 0000000000000000 00007f9b3fa753c7
(XEN) [2014-06-05 14:10:54.650] ffff83054ef7fed8 ffff83009fd27000 0000000000000011 ffff88004d45ab98
(XEN) [2014-06-05 14:10:54.650] 00007fff2b72c650 0000000000000011 00007cfab10800c7 ffff82d08022ca8b
(XEN) [2014-06-05 14:10:54.651] ffffffff8100148a 0000000000000024 0000000000000011 00007fff2b72c650
(XEN) [2014-06-05 14:10:54.651] ffff88004d45ab98 0000000000000011 ffff88004a14be98 00007fff2b72c650
(XEN) [2014-06-05 14:10:54.651] Xen call trace:
(XEN) [2014-06-05 14:10:54.651] [<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf
(XEN) [2014-06-05 14:10:54.651] [<ffff82d080126e2f>] sched_move_domain+0x2c1/0x3ea
(XEN) [2014-06-05 14:10:54.651] [<ffff82d080105dcc>] domain_kill+0xd0/0x159
(XEN) [2014-06-05 14:10:54.651] [<ffff82d080103926>] do_domctl+0xab8/0x1542
(XEN) [2014-06-05 14:10:54.651] [<ffff82d08022ca8b>] syscall_enter+0xeb/0x145
(XEN) [2014-06-05 14:10:54.651]
(XEN) [2014-06-05 14:10:54.651] Pagetable walk from 0000000000000328:
(XEN) [2014-06-05 14:10:54.651] L4[0x000] = 0000000544e38067 0000000000057fc5
(XEN) [2014-06-05 14:10:54.651] L3[0x000] = 000000053cc28067 000000000004fdd5
(XEN) [2014-06-05 14:10:54.651] L2[0x000] = 0000000000000000 ffffffffffffffff
(XEN) [2014-06-05 14:10:55.709]
(XEN) [2014-06-05 14:10:55.718] ****************************************
(XEN) [2014-06-05 14:10:55.737] Panic on CPU 5:
(XEN) [2014-06-05 14:10:55.750] FATAL PAGE FAULT
(XEN) [2014-06-05 14:10:55.763] [error_code=0000]
(XEN) [2014-06-05 14:10:55.776] Faulting linear address: 0000000000000328
(XEN) [2014-06-05 14:10:55.796] ****************************************
(XEN) [2014-06-05 14:10:55.815]
(XEN) [2014-06-05 14:10:55.824] Reboot in five seconds...
(XEN) [2014-06-05 14:10:55.839] APIC error on CPU0: 00(08)
(XEN) [2014-06-05 14:10:55.855] APIC error on CPU0: 08(08)
[-- Attachment #3: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: Xen-unstable: Xen panic when shutting down HVM guest with PCI passthrough: RIP: e008:[<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf
2014-06-05 14:54 Xen-unstable: Xen panic when shutting down HVM guest with PCI passthrough: RIP: e008:[<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf Sander Eikelenboom
@ 2014-06-05 15:03 ` Andrew Cooper
2014-06-05 16:03 ` Sander Eikelenboom
0 siblings, 1 reply; 12+ messages in thread
From: Andrew Cooper @ 2014-06-05 15:03 UTC (permalink / raw)
To: Sander Eikelenboom; +Cc: xen-devel, Jan Beulich
[-- Attachment #1.1: Type: text/plain, Size: 5664 bytes --]
On 05/06/14 15:54, Sander Eikelenboom wrote:
> Hi,
>
> When shutting down a HVM guest with PCI passthrough Xen panics with the panic
> below (complete xl-dmesg attached).
>
> # addr2line -e xen-syms ffff82d0801099b1
> /usr/src/new/xen-unstable/xen/common/event_channel.c:1326
>
> which is:
> pirq_set_affinity(d, chn->u.pirq.irq, mask);
This is presumably an ordering issue on destroy.
Does reverting bac6334b5 fix the problem?
~Andrew
>
> (XEN) [2014-06-05 14:10:54.290] AMD-Vi: Disable: device id = 0x700, domain = 1, paging mode = 4
> (XEN) [2014-06-05 14:10:54.290] AMD-Vi: Setup I/O page table: device id = 0x700, type = 0x1, root table = 0x54ef41000, domain = 0, paging mode = 3
> (XEN) [2014-06-05 14:10:54.290] AMD-Vi: Re-assign 0000:07:00.0 from dom1 to dom0
> (XEN) [2014-06-05 14:10:54.650] ----[ Xen-4.5-unstable x86_64 debug=y Not tainted ]----
> (XEN) [2014-06-05 14:10:54.650] CPU: 5
> (XEN) [2014-06-05 14:10:54.650] RIP: e008:[<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf
> (XEN) [2014-06-05 14:10:54.650] RFLAGS: 0000000000010202 CONTEXT: hypervisor
> (XEN) [2014-06-05 14:10:54.650] rax: 0000000000000019 rbx: 0000000000000320 rcx: 0000000000000001
> (XEN) [2014-06-05 14:10:54.650] rdx: ffff83054ef86020 rsi: 0000000000000200 rdi: ffff8305416eb0bc
> (XEN) [2014-06-05 14:10:54.650] rbp: ffff83054ef7fce8 rsp: ffff83054ef7fcc8 r8: 0000000000000001
> (XEN) [2014-06-05 14:10:54.650] r9: 000000000000003a r10: ffff82e008e31940 r11: 0000000000000001
> (XEN) [2014-06-05 14:10:54.650] r12: ffff8305416eb000 r13: ffff82d08023d740 r14: ffff8305416eb0b8
> (XEN) [2014-06-05 14:10:54.650] r15: ffffffffffffffff cr0: 000000008005003b cr4: 00000000000006f0
> (XEN) [2014-06-05 14:10:54.650] cr3: 0000000537296000 cr2: 0000000000000328
> (XEN) [2014-06-05 14:10:54.650] ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e010 cs: e008
> (XEN) [2014-06-05 14:10:54.650] Xen stack trace from rsp=ffff83054ef7fcc8:
> (XEN) [2014-06-05 14:10:54.650] ffff83009faf7000 0000000000000000 ffff830546cb6ee0 ffff83054eff8d00
> (XEN) [2014-06-05 14:10:54.650] ffff83054ef7fd68 ffff82d080126e2f ffff83054ef7fd48 ffff830546df8ef0
> (XEN) [2014-06-05 14:10:54.650] 00000000416eb1c0 ffff830546333870 ffff8305416eb000 ffff82d080320d60
> (XEN) [2014-06-05 14:10:54.650] ffff82d080277d20 ffff83054eff1068 0000000000000000 ffff8305416eb000
> (XEN) [2014-06-05 14:10:54.650] ffff8305416eb000 0000000000000000 0000000000000000 0000000000000011
> (XEN) [2014-06-05 14:10:54.650] ffff83054ef7fd98 ffff82d080105dcc ffff82d080129dcf ffff8305416eb000
> (XEN) [2014-06-05 14:10:54.650] ffffffffffffffff 00007f9b40a0b004 ffff83054ef7fef8 ffff82d080103926
> (XEN) [2014-06-05 14:10:54.650] ffff83054ef913a0 0000000000000282 ffff8305480e1010 ffff83009fd27000
> (XEN) [2014-06-05 14:10:54.650] 0000000000000000 ffff83009fd2718c 0000000000000246 0000000000000011
> (XEN) [2014-06-05 14:10:54.650] ffff83054ef7fdf8 0000000000000206 ffff83054ef7fe18 ffff82d08012c757
> (XEN) [2014-06-05 14:10:54.650] ffff83009fd27060 0000000000000005 ffff83054ef7fe68 0000000000000206
> (XEN) [2014-06-05 14:10:54.650] ffff83009fd27088 0000000000000286 0000000a00000002 0000000000000001
> (XEN) [2014-06-05 14:10:54.650] 0000000001eb2168 0000000001eb16a0 00007f9b4037c000 00007f9b407fc9f2
> (XEN) [2014-06-05 14:10:54.650] 35622d6200000005 0000000000000000 00007fff2b72c740 00007f9b40158620
> (XEN) [2014-06-05 14:10:54.650] 0000000000000010 0000000001ea8330 00007fff2b72c7b0 0000000001eb1e40
> (XEN) [2014-06-05 14:10:54.650] 0000000000000001 00007f9b40802a55 0000000000000000 00007f9b3fa753c7
> (XEN) [2014-06-05 14:10:54.650] ffff83054ef7fed8 ffff83009fd27000 0000000000000011 ffff88004d45ab98
> (XEN) [2014-06-05 14:10:54.650] 00007fff2b72c650 0000000000000011 00007cfab10800c7 ffff82d08022ca8b
> (XEN) [2014-06-05 14:10:54.651] ffffffff8100148a 0000000000000024 0000000000000011 00007fff2b72c650
> (XEN) [2014-06-05 14:10:54.651] ffff88004d45ab98 0000000000000011 ffff88004a14be98 00007fff2b72c650
> (XEN) [2014-06-05 14:10:54.651] Xen call trace:
> (XEN) [2014-06-05 14:10:54.651] [<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf
> (XEN) [2014-06-05 14:10:54.651] [<ffff82d080126e2f>] sched_move_domain+0x2c1/0x3ea
> (XEN) [2014-06-05 14:10:54.651] [<ffff82d080105dcc>] domain_kill+0xd0/0x159
> (XEN) [2014-06-05 14:10:54.651] [<ffff82d080103926>] do_domctl+0xab8/0x1542
> (XEN) [2014-06-05 14:10:54.651] [<ffff82d08022ca8b>] syscall_enter+0xeb/0x145
> (XEN) [2014-06-05 14:10:54.651]
> (XEN) [2014-06-05 14:10:54.651] Pagetable walk from 0000000000000328:
> (XEN) [2014-06-05 14:10:54.651] L4[0x000] = 0000000544e38067 0000000000057fc5
> (XEN) [2014-06-05 14:10:54.651] L3[0x000] = 000000053cc28067 000000000004fdd5
> (XEN) [2014-06-05 14:10:54.651] L2[0x000] = 0000000000000000 ffffffffffffffff
> (XEN) [2014-06-05 14:10:55.709]
> (XEN) [2014-06-05 14:10:55.718] ****************************************
> (XEN) [2014-06-05 14:10:55.737] Panic on CPU 5:
> (XEN) [2014-06-05 14:10:55.750] FATAL PAGE FAULT
> (XEN) [2014-06-05 14:10:55.763] [error_code=0000]
> (XEN) [2014-06-05 14:10:55.776] Faulting linear address: 0000000000000328
> (XEN) [2014-06-05 14:10:55.796] ****************************************
> (XEN) [2014-06-05 14:10:55.815]
> (XEN) [2014-06-05 14:10:55.824] Reboot in five seconds...
> (XEN) [2014-06-05 14:10:55.839] APIC error on CPU0: 00(08)
> (XEN) [2014-06-05 14:10:55.855] APIC error on CPU0: 08(08)
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 6361 bytes --]
[-- Attachment #2: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Xen-unstable: Xen panic when shutting down HVM guest with PCI passthrough: RIP: e008:[<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf
2014-06-05 15:03 ` Andrew Cooper
@ 2014-06-05 16:03 ` Sander Eikelenboom
2014-06-05 16:22 ` Andrew Cooper
0 siblings, 1 reply; 12+ messages in thread
From: Sander Eikelenboom @ 2014-06-05 16:03 UTC (permalink / raw)
To: Andrew Cooper; +Cc: xen-devel, Jan Beulich
Thursday, June 5, 2014, 5:03:24 PM, you wrote:
> On 05/06/14 15:54, Sander Eikelenboom wrote:
>
> Hi,
> When shutting down a HVM guest with PCI passthrough Xen panics with the panic
> below (complete xl-dmesg attached).
> # addr2line -e xen-syms ffff82d0801099b1
> /usr/src/new/xen-unstable/xen/common/event_channel.c:1326
> which is:
> pirq_set_affinity(d, chn->u.pirq.irq, mask);
>
>
> This is presumably an ordering issue on destroy.
>
> Does reverting bac6334b5 fix the problem?
>
> ~Andrew
Hi Andrew,
That seems to have been a good hunch, after reverting that commit i have been
able to repeatedly create and shutdown the guest with passthrough, without a crash.
--
Sander
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Xen-unstable: Xen panic when shutting down HVM guest with PCI passthrough: RIP: e008:[<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf
2014-06-05 16:03 ` Sander Eikelenboom
@ 2014-06-05 16:22 ` Andrew Cooper
2014-06-06 4:43 ` Jürgen Groß
0 siblings, 1 reply; 12+ messages in thread
From: Andrew Cooper @ 2014-06-05 16:22 UTC (permalink / raw)
To: Sander Eikelenboom; +Cc: George Dunlap, xen-devel, Juergen Gross, Jan Beulich
On 05/06/14 17:03, Sander Eikelenboom wrote:
> Thursday, June 5, 2014, 5:03:24 PM, you wrote:
>
>> On 05/06/14 15:54, Sander Eikelenboom wrote:
>>
>> Hi,
>> When shutting down a HVM guest with PCI passthrough Xen panics with the panic
>> below (complete xl-dmesg attached).
>> # addr2line -e xen-syms ffff82d0801099b1
>> /usr/src/new/xen-unstable/xen/common/event_channel.c:1326
>> which is:
>> pirq_set_affinity(d, chn->u.pirq.irq, mask);
>>
>>
>> This is presumably an ordering issue on destroy.
>>
>> Does reverting bac6334b5 fix the problem?
>>
>> ~Andrew
> Hi Andrew,
>
> That seems to have been a good hunch, after reverting that commit i have been
> able to repeatedly create and shutdown the guest with passthrough, without a crash.
>
> --
> Sander
>
CC'ing George and Juergen as the authors of the identified patch
c/s bac6334b5 "move domain to cpupool0 before destroying it" appears to
cause the crash identified the root of this thread.
It appears to now move event channels after having torn parts of the
event channel infrastructure.
~Andrew
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Xen-unstable: Xen panic when shutting down HVM guest with PCI passthrough: RIP: e008:[<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf
2014-06-05 16:22 ` Andrew Cooper
@ 2014-06-06 4:43 ` Jürgen Groß
2014-06-06 8:15 ` Sander Eikelenboom
2014-06-06 10:32 ` Jan Beulich
0 siblings, 2 replies; 12+ messages in thread
From: Jürgen Groß @ 2014-06-06 4:43 UTC (permalink / raw)
To: Andrew Cooper, Sander Eikelenboom; +Cc: George Dunlap, xen-devel, Jan Beulich
On 06/05/2014 06:22 PM, Andrew Cooper wrote:
> On 05/06/14 17:03, Sander Eikelenboom wrote:
>> Thursday, June 5, 2014, 5:03:24 PM, you wrote:
>>
>>> On 05/06/14 15:54, Sander Eikelenboom wrote:
>>>
>>> Hi,
>>> When shutting down a HVM guest with PCI passthrough Xen panics with the panic
>>> below (complete xl-dmesg attached).
>>> # addr2line -e xen-syms ffff82d0801099b1
>>> /usr/src/new/xen-unstable/xen/common/event_channel.c:1326
>>> which is:
>>> pirq_set_affinity(d, chn->u.pirq.irq, mask);
>>>
>>>
>>> This is presumably an ordering issue on destroy.
>>>
>>> Does reverting bac6334b5 fix the problem?
>>>
>>> ~Andrew
>> Hi Andrew,
>>
>> That seems to have been a good hunch, after reverting that commit i have been
>> able to repeatedly create and shutdown the guest with passthrough, without a crash.
>>
>> --
>> Sander
>>
>
> CC'ing George and Juergen as the authors of the identified patch
>
> c/s bac6334b5 "move domain to cpupool0 before destroying it" appears to
> cause the crash identified the root of this thread.
>
> It appears to now move event channels after having torn parts of the
> event channel infrastructure.
Hmm, does the following patch fix it?
Juergen
diff --git a/xen/common/schedule.c b/xen/common/schedule.c
index c174c41..3ea9fc8 100644
--- a/xen/common/schedule.c
+++ b/xen/common/schedule.c
@@ -297,7 +297,8 @@ int sched_move_domain(struct domain *d, struct
cpupool *c)
spin_unlock_irq(lock);
v->sched_priv = vcpu_priv[v->vcpu_id];
- evtchn_move_pirqs(v);
+ if ( !d->is_dying )
+ evtchn_move_pirqs(v);
new_p = cpumask_cycle(new_p, c->cpu_valid);
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: Xen-unstable: Xen panic when shutting down HVM guest with PCI passthrough: RIP: e008:[<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf
2014-06-06 4:43 ` Jürgen Groß
@ 2014-06-06 8:15 ` Sander Eikelenboom
2014-06-06 8:35 ` Jan Beulich
2014-06-06 10:32 ` Jan Beulich
1 sibling, 1 reply; 12+ messages in thread
From: Sander Eikelenboom @ 2014-06-06 8:15 UTC (permalink / raw)
To: Jürgen Groß
Cc: George Dunlap, Andrew Cooper, Jan Beulich, xen-devel
Friday, June 6, 2014, 6:43:28 AM, you wrote:
> On 06/05/2014 06:22 PM, Andrew Cooper wrote:
>> On 05/06/14 17:03, Sander Eikelenboom wrote:
>>> Thursday, June 5, 2014, 5:03:24 PM, you wrote:
>>>
>>>> On 05/06/14 15:54, Sander Eikelenboom wrote:
>>>>
>>>> Hi,
>>>> When shutting down a HVM guest with PCI passthrough Xen panics with the panic
>>>> below (complete xl-dmesg attached).
>>>> # addr2line -e xen-syms ffff82d0801099b1
>>>> /usr/src/new/xen-unstable/xen/common/event_channel.c:1326
>>>> which is:
>>>> pirq_set_affinity(d, chn->u.pirq.irq, mask);
>>>>
>>>>
>>>> This is presumably an ordering issue on destroy.
>>>>
>>>> Does reverting bac6334b5 fix the problem?
>>>>
>>>> ~Andrew
>>> Hi Andrew,
>>>
>>> That seems to have been a good hunch, after reverting that commit i have been
>>> able to repeatedly create and shutdown the guest with passthrough, without a crash.
>>>
>>> --
>>> Sander
>>>
>>
>> CC'ing George and Juergen as the authors of the identified patch
>>
>> c/s bac6334b5 "move domain to cpupool0 before destroying it" appears to
>> cause the crash identified the root of this thread.
>>
>> It appears to now move event channels after having torn parts of the
>> event channel infrastructure.
> Hmm, does the following patch fix it?
> Juergen
> diff --git a/xen/common/schedule.c b/xen/common/schedule.c
> index c174c41..3ea9fc8 100644
> --- a/xen/common/schedule.c
> +++ b/xen/common/schedule.c
> @@ -297,7 +297,8 @@ int sched_move_domain(struct domain *d, struct
> cpupool *c)
> spin_unlock_irq(lock);
> v->sched_priv = vcpu_priv[v->vcpu_id];
> - evtchn_move_pirqs(v);
+ if ( !d->>is_dying )
> + evtchn_move_pirqs(v);
> new_p = cpumask_cycle(new_p, c->cpu_valid);
Hi Jürgen,
Tried that one, it prevents the host panic, but immediately after i do get a:
[ 658.222311] irq 16: nobody cared (try booting with the "irqpoll" option)
[ 658.229069] CPU: 0 PID: 17104 Comm: smtp Not tainted 3.15.0-rc8-20140602-net-xendev-bt-mq+ #1
[ 658.235996] Hardware name: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010
[ 658.243234] ffff880054b00718 ffff88005f603d98 ffffffff81b93243 ffff88002e4e9330
[ 658.250342] ffff880054b00690 ffff88005f603dc8 ffffffff8112306d ffff88005f603dc8
[ 658.257411] ffff880054b00690 0000000000000010 0000000000000000 ffff88005f603e18
[ 658.264362] Call Trace:
[ 658.271128] <IRQ> [<ffffffff81b93243>] dump_stack+0x46/0x58
[ 658.278096] [<ffffffff8112306d>] __report_bad_irq+0x3d/0xe0
[ 658.285175] [<ffffffff8112355f>] note_interrupt+0x1bf/0x210
[ 658.292210] [<ffffffff81120ca5>] handle_irq_event_percpu+0xb5/0x1e0
[ 658.299135] [<ffffffff81120e18>] handle_irq_event+0x48/0x70
[ 658.306032] [<ffffffff8112411f>] ? handle_fasteoi_irq+0x2f/0x150
[ 658.312935] [<ffffffff8112417c>] handle_fasteoi_irq+0x8c/0x150
[ 658.319847] [<ffffffff811204f2>] generic_handle_irq+0x22/0x40
[ 658.326627] [<ffffffff8157dfb7>] evtchn_fifo_handle_events+0x137/0x140
[ 658.333370] [<ffffffff8157aef0>] __xen_evtchn_do_upcall+0x50/0xa0
[ 658.340061] [<ffffffff8157cc37>] xen_evtchn_do_upcall+0x37/0x50
[ 658.346575] [<ffffffff81b9ff5e>] xen_do_hypervisor_callback+0x1e/0x30
[ 658.353214] <EOI>
[ 658.353264] handlers:
[ 658.366234] [<ffffffff819a2440>] azx_interrupt
[ 658.372806] Disabling IRQ #16
Which could be related ?
--
Sander
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Xen-unstable: Xen panic when shutting down HVM guest with PCI passthrough: RIP: e008:[<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf
2014-06-06 8:15 ` Sander Eikelenboom
@ 2014-06-06 8:35 ` Jan Beulich
2014-06-06 9:44 ` Sander Eikelenboom
0 siblings, 1 reply; 12+ messages in thread
From: Jan Beulich @ 2014-06-06 8:35 UTC (permalink / raw)
To: Sander Eikelenboom, Juergen Gross; +Cc: George Dunlap, Andrew Cooper, xen-devel
>>> On 06.06.14 at 10:15, <linux@eikelenboom.it> wrote:
>> Hmm, does the following patch fix it?
>
>
>> Juergen
>
>> diff --git a/xen/common/schedule.c b/xen/common/schedule.c
>> index c174c41..3ea9fc8 100644
>> --- a/xen/common/schedule.c
>> +++ b/xen/common/schedule.c
>> @@ -297,7 +297,8 @@ int sched_move_domain(struct domain *d, struct
>> cpupool *c)
>> spin_unlock_irq(lock);
>
>> v->sched_priv = vcpu_priv[v->vcpu_id];
>> - evtchn_move_pirqs(v);
> + if ( !d->>is_dying )
>> + evtchn_move_pirqs(v);
>
>> new_p = cpumask_cycle(new_p, c->cpu_valid);
>
> Hi Jürgen,
>
> Tried that one, it prevents the host panic, but immediately after i do get
> a:
>
> [ 658.222311] irq 16: nobody cared (try booting with the "irqpoll" option)
> [ 658.229069] CPU: 0 PID: 17104 Comm: smtp Not tainted
> 3.15.0-rc8-20140602-net-xendev-bt-mq+ #1
> [ 658.235996] Hardware name: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010
> [ 658.243234] ffff880054b00718 ffff88005f603d98 ffffffff81b93243 ffff88002e4e9330
> [ 658.250342] ffff880054b00690 ffff88005f603dc8 ffffffff8112306d ffff88005f603dc8
> [ 658.257411] ffff880054b00690 0000000000000010 0000000000000000 ffff88005f603e18
> [ 658.264362] Call Trace:
> [ 658.271128] <IRQ> [<ffffffff81b93243>] dump_stack+0x46/0x58
> [ 658.278096] [<ffffffff8112306d>] __report_bad_irq+0x3d/0xe0
> [ 658.285175] [<ffffffff8112355f>] note_interrupt+0x1bf/0x210
> [ 658.292210] [<ffffffff81120ca5>] handle_irq_event_percpu+0xb5/0x1e0
> [ 658.299135] [<ffffffff81120e18>] handle_irq_event+0x48/0x70
> [ 658.306032] [<ffffffff8112411f>] ? handle_fasteoi_irq+0x2f/0x150
> [ 658.312935] [<ffffffff8112417c>] handle_fasteoi_irq+0x8c/0x150
> [ 658.319847] [<ffffffff811204f2>] generic_handle_irq+0x22/0x40
> [ 658.326627] [<ffffffff8157dfb7>] evtchn_fifo_handle_events+0x137/0x140
> [ 658.333370] [<ffffffff8157aef0>] __xen_evtchn_do_upcall+0x50/0xa0
> [ 658.340061] [<ffffffff8157cc37>] xen_evtchn_do_upcall+0x37/0x50
> [ 658.346575] [<ffffffff81b9ff5e>] xen_do_hypervisor_callback+0x1e/0x30
> [ 658.353214] <EOI>
> [ 658.353264] handlers:
> [ 658.366234] [<ffffffff819a2440>] azx_interrupt
> [ 658.372806] Disabling IRQ #16
>
> Which could be related ?
evtchn_move_pirqs() is an entirely optional thing, trying to keep the
IRQs at CPUs where they would also get serviced. So from an
abstract pov making the call conditional upon an alive domain should
be unrelated. Otoh I suppose you would have told us if with the
commit reverted that Andrew suggested you also saw this...
Is the passed through device also sitting on IRQ 16 (the one getting
disabled)? In which case the question would be whether the passed
through device gets properly shut down when the guest terminates.
Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Xen-unstable: Xen panic when shutting down HVM guest with PCI passthrough: RIP: e008:[<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf
2014-06-06 8:35 ` Jan Beulich
@ 2014-06-06 9:44 ` Sander Eikelenboom
2014-06-06 10:03 ` Jan Beulich
0 siblings, 1 reply; 12+ messages in thread
From: Sander Eikelenboom @ 2014-06-06 9:44 UTC (permalink / raw)
To: Jan Beulich; +Cc: Juergen Gross, Andrew Cooper, George Dunlap, xen-devel
Friday, June 6, 2014, 10:35:05 AM, you wrote:
>>>> On 06.06.14 at 10:15, <linux@eikelenboom.it> wrote:
>>> Hmm, does the following patch fix it?
>>
>>
>>> Juergen
>>
>>> diff --git a/xen/common/schedule.c b/xen/common/schedule.c
>>> index c174c41..3ea9fc8 100644
>>> --- a/xen/common/schedule.c
>>> +++ b/xen/common/schedule.c
>>> @@ -297,7 +297,8 @@ int sched_move_domain(struct domain *d, struct
>>> cpupool *c)
>>> spin_unlock_irq(lock);
>>
>>> v->sched_priv = vcpu_priv[v->vcpu_id];
>>> - evtchn_move_pirqs(v);
>> + if ( !d->>is_dying )
>>> + evtchn_move_pirqs(v);
>>
>>> new_p = cpumask_cycle(new_p, c->cpu_valid);
>>
>> Hi Jürgen,
>>
>> Tried that one, it prevents the host panic, but immediately after i do get
>> a:
>>
>> [ 658.222311] irq 16: nobody cared (try booting with the "irqpoll" option)
>> [ 658.229069] CPU: 0 PID: 17104 Comm: smtp Not tainted
>> 3.15.0-rc8-20140602-net-xendev-bt-mq+ #1
>> [ 658.235996] Hardware name: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010
>> [ 658.243234] ffff880054b00718 ffff88005f603d98 ffffffff81b93243 ffff88002e4e9330
>> [ 658.250342] ffff880054b00690 ffff88005f603dc8 ffffffff8112306d ffff88005f603dc8
>> [ 658.257411] ffff880054b00690 0000000000000010 0000000000000000 ffff88005f603e18
>> [ 658.264362] Call Trace:
>> [ 658.271128] <IRQ> [<ffffffff81b93243>] dump_stack+0x46/0x58
>> [ 658.278096] [<ffffffff8112306d>] __report_bad_irq+0x3d/0xe0
>> [ 658.285175] [<ffffffff8112355f>] note_interrupt+0x1bf/0x210
>> [ 658.292210] [<ffffffff81120ca5>] handle_irq_event_percpu+0xb5/0x1e0
>> [ 658.299135] [<ffffffff81120e18>] handle_irq_event+0x48/0x70
>> [ 658.306032] [<ffffffff8112411f>] ? handle_fasteoi_irq+0x2f/0x150
>> [ 658.312935] [<ffffffff8112417c>] handle_fasteoi_irq+0x8c/0x150
>> [ 658.319847] [<ffffffff811204f2>] generic_handle_irq+0x22/0x40
>> [ 658.326627] [<ffffffff8157dfb7>] evtchn_fifo_handle_events+0x137/0x140
>> [ 658.333370] [<ffffffff8157aef0>] __xen_evtchn_do_upcall+0x50/0xa0
>> [ 658.340061] [<ffffffff8157cc37>] xen_evtchn_do_upcall+0x37/0x50
>> [ 658.346575] [<ffffffff81b9ff5e>] xen_do_hypervisor_callback+0x1e/0x30
>> [ 658.353214] <EOI>
>> [ 658.353264] handlers:
>> [ 658.366234] [<ffffffff819a2440>] azx_interrupt
>> [ 658.372806] Disabling IRQ #16
>>
>> Which could be related ?
> evtchn_move_pirqs() is an entirely optional thing, trying to keep the
> IRQs at CPUs where they would also get serviced. So from an
> abstract pov making the call conditional upon an alive domain should
> be unrelated. Otoh I suppose you would have told us if with the
> commit reverted that Andrew suggested you also saw this...
OK did some more testing:
Nope i didn't see it before .. but I can't seem to trigger it again ..
so the patch seems to be OK.
( Oh and when being stubborn and trying to restart the guest with passthrough after this message
causes a complete machine freeze (without any stacktrace on serial console
(without sync_console though)
)
> Is the passed through device also sitting on IRQ 16 (the one getting
> disabled)? In which case the question would be whether the passed
> through device gets properly shut down when the guest terminates.
Under the assumption that the devices get the same irq after reboot (which seems
to be the case) ..
it wasn't .. it was the onboard soundcontroller which was still assigned to dom0 (and not in active use).
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
Subsystem: Micro-Star International Co., Ltd. Device 7640
Flags: bus master, slow devsel, latency 64, IRQ 16
Memory at fddf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Kernel driver in use: snd_hda_intel
Will keep an eye on it .. and try to use the debug keys to dump irq states etc from serial console when i spot it again.
--
Sander
> Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: Xen-unstable: Xen panic when shutting down HVM guest with PCI passthrough: RIP: e008:[<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf
2014-06-06 9:44 ` Sander Eikelenboom
@ 2014-06-06 10:03 ` Jan Beulich
2014-06-06 10:14 ` Sander Eikelenboom
0 siblings, 1 reply; 12+ messages in thread
From: Jan Beulich @ 2014-06-06 10:03 UTC (permalink / raw)
To: Sander Eikelenboom; +Cc: George Dunlap, Andrew Cooper, Juergen Gross, xen-devel
>>> On 06.06.14 at 11:44, <linux@eikelenboom.it> wrote:
> OK did some more testing:
>
> Nope i didn't see it before .. but I can't seem to trigger it again ..
> so the patch seems to be OK.
Good.
> ( Oh and when being stubborn and trying to restart the guest with
> passthrough after this message
> causes a complete machine freeze (without any stacktrace on serial console
> (without sync_console though)
> )
That's concerning, but would require to be reproducible in order to
investigate.
>> Is the passed through device also sitting on IRQ 16 (the one getting
>> disabled)? In which case the question would be whether the passed
>> through device gets properly shut down when the guest terminates.
>
> Under the assumption that the devices get the same irq after reboot (which
> seems
> to be the case) ..
> it wasn't .. it was the onboard soundcontroller which was still assigned to
> dom0 (and not in active use).
>
> 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia
> (Intel HDA) (rev 40)
> Subsystem: Micro-Star International Co., Ltd. Device 7640
> Flags: bus master, slow devsel, latency 64, IRQ 16
> Memory at fddf8000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Kernel driver in use: snd_hda_intel
That the in-Dom0 device was a sound controller was clear from the
kernel messages. The question was what IRQ(s) the passed through
device is using.
> Will keep an eye on it .. and try to use the debug keys to dump irq states
> etc from serial console when i spot it again.
Thanks.
Jan
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Xen-unstable: Xen panic when shutting down HVM guest with PCI passthrough: RIP: e008:[<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf
2014-06-06 10:03 ` Jan Beulich
@ 2014-06-06 10:14 ` Sander Eikelenboom
2014-06-06 10:31 ` Jan Beulich
0 siblings, 1 reply; 12+ messages in thread
From: Sander Eikelenboom @ 2014-06-06 10:14 UTC (permalink / raw)
To: Jan Beulich; +Cc: George Dunlap, Andrew Cooper, Juergen Gross, xen-devel
Friday, June 6, 2014, 12:03:20 PM, you wrote:
>>>> On 06.06.14 at 11:44, <linux@eikelenboom.it> wrote:
>> OK did some more testing:
>>
>> Nope i didn't see it before .. but I can't seem to trigger it again ..
>> so the patch seems to be OK.
> Good.
>> ( Oh and when being stubborn and trying to restart the guest with
>> passthrough after this message
>> causes a complete machine freeze (without any stacktrace on serial console
>> (without sync_console though)
>> )
> That's concerning, but would require to be reproducible in order to
> investigate.
Will try to gather as much info as i can when i spot it again.
>>> Is the passed through device also sitting on IRQ 16 (the one getting
>>> disabled)? In which case the question would be whether the passed
>>> through device gets properly shut down when the guest terminates.
>>
>> Under the assumption that the devices get the same irq after reboot (which
>> seems
>> to be the case) ..
>> it wasn't .. it was the onboard soundcontroller which was still assigned to
>> dom0 (and not in active use).
>>
>> 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia
>> (Intel HDA) (rev 40)
>> Subsystem: Micro-Star International Co., Ltd. Device 7640
>> Flags: bus master, slow devsel, latency 64, IRQ 16
>> Memory at fddf8000 (64-bit, non-prefetchable) [size=16K]
>> Capabilities: [50] Power Management version 2
>> Kernel driver in use: snd_hda_intel
> That the in-Dom0 device was a sound controller was clear from the
> kernel messages. The question was what IRQ(s) the passed through
> device is using.
07:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Turks [Radeon HD 6570] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Device e193
Flags: fast devsel, IRQ 32
Memory at a0000000 (64-bit, prefetchable) [disabled] [size=256M]
Memory at fe1c0000 (64-bit, non-prefetchable) [disabled] [size=128K]
I/O ports at a000 [disabled] [size=256]
Expansion ROM at fe1a0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150] Advanced Error Reporting
Kernel driver in use: pciback
>> Will keep an eye on it .. and try to use the debug keys to dump irq states
>> etc from serial console when i spot it again.
> Thanks.
> Jan
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: Xen-unstable: Xen panic when shutting down HVM guest with PCI passthrough: RIP: e008:[<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf
2014-06-06 10:14 ` Sander Eikelenboom
@ 2014-06-06 10:31 ` Jan Beulich
0 siblings, 0 replies; 12+ messages in thread
From: Jan Beulich @ 2014-06-06 10:31 UTC (permalink / raw)
To: Sander Eikelenboom; +Cc: George Dunlap, Andrew Cooper, Juergen Gross, xen-devel
>>> On 06.06.14 at 12:14, <linux@eikelenboom.it> wrote:
>>> 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia
>>> (Intel HDA) (rev 40)
>>> Subsystem: Micro-Star International Co., Ltd. Device 7640
>>> Flags: bus master, slow devsel, latency 64, IRQ 16
>>> Memory at fddf8000 (64-bit, non-prefetchable) [size=16K]
>>> Capabilities: [50] Power Management version 2
>>> Kernel driver in use: snd_hda_intel
>
>> That the in-Dom0 device was a sound controller was clear from the
>> kernel messages. The question was what IRQ(s) the passed through
>> device is using.
>
> 07:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI
> Turks [Radeon HD 6570] (prog-if 00 [VGA controller])
> Subsystem: PC Partner Limited Device e193
> Flags: fast devsel, IRQ 32
> Memory at a0000000 (64-bit, prefetchable) [disabled] [size=256M]
> Memory at fe1c0000 (64-bit, non-prefetchable) [disabled] [size=128K]
> I/O ports at a000 [disabled] [size=256]
> Expansion ROM at fe1a0000 [disabled] [size=128K]
> Capabilities: [50] Power Management version 3
> Capabilities: [58] Express Legacy Endpoint, MSI 00
> Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
> Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
> Capabilities: [150] Advanced Error Reporting
> Kernel driver in use: pciback
Okay, different IRQ indeed. So either vectors collided badly (which
shouldn't happen), or some other (likely kernel side) issue popped
up at exactly the wrong moment.
Jan
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Xen-unstable: Xen panic when shutting down HVM guest with PCI passthrough: RIP: e008:[<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf
2014-06-06 4:43 ` Jürgen Groß
2014-06-06 8:15 ` Sander Eikelenboom
@ 2014-06-06 10:32 ` Jan Beulich
1 sibling, 0 replies; 12+ messages in thread
From: Jan Beulich @ 2014-06-06 10:32 UTC (permalink / raw)
To: Juergen Gross; +Cc: George Dunlap, Andrew Cooper, xen-devel, Sander Eikelenboom
>>> On 06.06.14 at 06:43, <JGross@suse.com> wrote:
> On 06/05/2014 06:22 PM, Andrew Cooper wrote:
>> c/s bac6334b5 "move domain to cpupool0 before destroying it" appears to
>> cause the crash identified the root of this thread.
>>
>> It appears to now move event channels after having torn parts of the
>> event channel infrastructure.
>
> Hmm, does the following patch fix it?
>
>
> Juergen
>
> diff --git a/xen/common/schedule.c b/xen/common/schedule.c
> index c174c41..3ea9fc8 100644
> --- a/xen/common/schedule.c
> +++ b/xen/common/schedule.c
> @@ -297,7 +297,8 @@ int sched_move_domain(struct domain *d, struct
> cpupool *c)
> spin_unlock_irq(lock);
>
> v->sched_priv = vcpu_priv[v->vcpu_id];
> - evtchn_move_pirqs(v);
> + if ( !d->is_dying )
> + evtchn_move_pirqs(v);
>
> new_p = cpumask_cycle(new_p, c->cpu_valid);
Now that the patch was largely confirmed to help, would you mind
submitting it in proper shape?
Thanks, Jan
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2014-06-06 10:32 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-06-05 14:54 Xen-unstable: Xen panic when shutting down HVM guest with PCI passthrough: RIP: e008:[<ffff82d0801099b1>] evtchn_move_pirqs+0x90/0xbf Sander Eikelenboom
2014-06-05 15:03 ` Andrew Cooper
2014-06-05 16:03 ` Sander Eikelenboom
2014-06-05 16:22 ` Andrew Cooper
2014-06-06 4:43 ` Jürgen Groß
2014-06-06 8:15 ` Sander Eikelenboom
2014-06-06 8:35 ` Jan Beulich
2014-06-06 9:44 ` Sander Eikelenboom
2014-06-06 10:03 ` Jan Beulich
2014-06-06 10:14 ` Sander Eikelenboom
2014-06-06 10:31 ` Jan Beulich
2014-06-06 10:32 ` Jan Beulich
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).