From: Julien Grall <julien.grall@linaro.org>
To: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: xen-devel@lists.xenproject.org, stefano.stabellini@citrix.com,
ian.campbell@citrix.com, tim@xen.org
Subject: Re: [RFC 07/19] xen/dts: Use unsigned int for MMIO and IRQ index
Date: Thu, 19 Jun 2014 12:42:26 +0100 [thread overview]
Message-ID: <53A2CCA2.9020304@linaro.org> (raw)
In-Reply-To: <alpine.DEB.2.02.1406181953160.13771@kaball.uk.xensource.com>
Hi Stefano,
On 06/18/2014 07:54 PM, Stefano Stabellini wrote:
> On Mon, 16 Jun 2014, Julien Grall wrote:
>> There is no reason to use signed integer for an index. Futhermore, this will
>> avoid possible issue when theses functions will be exposed to the guest
>> via new hypercalls.
>>
>> Signed-off-by: Julien Grall <julien.grall@linaro.org>
>> ---
>> xen/common/device_tree.c | 10 +++++-----
>> xen/include/xen/device_tree.h | 7 ++++---
>> 2 files changed, 9 insertions(+), 8 deletions(-)
>>
>> diff --git a/xen/common/device_tree.c b/xen/common/device_tree.c
>> index f0b17a3..4736e0d 100644
>> --- a/xen/common/device_tree.c
>> +++ b/xen/common/device_tree.c
>> @@ -876,7 +876,7 @@ static const struct dt_bus *dt_match_bus(const struct dt_device_node *np)
>> }
>>
>> static const __be32 *dt_get_address(const struct dt_device_node *dev,
>> - int index, u64 *size,
>> + unsigned index, u64 *size,
>
> It is the same thing but you might as well use unsigned int.
I forgot to add int here. I will do in the next version.
>> unsigned int *flags)
>> {
>> const __be32 *prop;
>> @@ -1063,7 +1063,7 @@ bail:
>> }
>>
>> /* dt_device_address - Translate device tree address and return it */
>> -int dt_device_get_address(const struct dt_device_node *dev, int index,
>> +int dt_device_get_address(const struct dt_device_node *dev, unsigned int index,
>> u64 *addr, u64 *size)
>> {
>> const __be32 *addrp;
>> @@ -1386,7 +1386,7 @@ fail:
>> return -EINVAL;
>> }
>>
>> -int dt_device_get_raw_irq(const struct dt_device_node *device, int index,
>> +int dt_device_get_raw_irq(const struct dt_device_node *device, uint32_t index,
>
> Why are you changing the other indexes to unsigned int and this one to
> uint32_t?
I don't remember. I will change it to unsigned int.
>> struct dt_raw_irq *out_irq)
>> {
>> const struct dt_device_node *p;
>> @@ -1394,7 +1394,7 @@ int dt_device_get_raw_irq(const struct dt_device_node *device, int index,
>> u32 intsize, intlen;
>> int res = -EINVAL;
>>
>> - dt_dprintk("dt_device_get_raw_irq: dev=%s, index=%d\n",
>> + dt_dprintk("dt_device_get_raw_irq: dev=%s, index=%u\n",
>> device->full_name, index);
>>
>> /* Get the interrupts property */
>> @@ -1445,7 +1445,7 @@ int dt_irq_translate(const struct dt_raw_irq *raw,
>> &out_irq->irq, &out_irq->type);
>> }
>>
>> -int dt_device_get_irq(const struct dt_device_node *device, int index,
>> +int dt_device_get_irq(const struct dt_device_node *device, uint32_t index,
>
> ditto
Same here :/.
Regards,
--
Julien Grall
next prev parent reply other threads:[~2014-06-19 11:42 UTC|newest]
Thread overview: 122+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-16 16:17 [RFC 00/19] xe/arm: Add support for non-pci passthrough Julien Grall
2014-06-16 16:17 ` [RFC 01/19] xen/arm: guest_physmap_remove_page: Print a warning if we fail to unmap the page Julien Grall
2014-06-18 15:03 ` Stefano Stabellini
2014-07-03 10:52 ` Ian Campbell
2014-07-03 11:17 ` Julien Grall
2014-06-16 16:17 ` [RFC 02/19] xen: guestcopy: Provide an helper to copy string from guest Julien Grall
2014-06-17 8:01 ` Jan Beulich
2014-06-17 9:09 ` Julien Grall
2014-06-17 9:17 ` Jan Beulich
2014-06-17 9:23 ` Julien Grall
2014-06-17 22:43 ` Daniel De Graaf
2014-06-18 11:59 ` Jan Beulich
2014-06-18 12:22 ` Julien Grall
2014-06-18 12:49 ` Jan Beulich
2014-06-18 12:53 ` Julien Grall
2014-06-18 13:01 ` Jan Beulich
2014-06-24 14:58 ` Julien Grall
2014-06-16 16:17 ` [RFC 03/19] xen/arm: follow-up to allow DOM0 manage IRQ and MMIO Julien Grall
2014-06-18 20:21 ` Stefano Stabellini
2014-06-18 20:32 ` Julien Grall
2014-07-03 11:02 ` Ian Campbell
2014-07-03 11:23 ` Julien Grall
2014-07-03 12:12 ` Ian Campbell
2014-06-16 16:17 ` [RFC 04/19] xen/arm: route_irq_to_guest: Check validity of the IRQ Julien Grall
2014-06-18 18:52 ` Stefano Stabellini
2014-06-18 19:03 ` Julien Grall
2014-07-03 11:04 ` Ian Campbell
2014-07-03 11:47 ` Julien Grall
2014-06-16 16:17 ` [RFC 05/19] xen/arm: Release IRQ routed to a domain when it's destroying Julien Grall
2014-06-18 18:08 ` Stefano Stabellini
2014-06-18 18:26 ` Julien Grall
2014-06-18 18:48 ` Stefano Stabellini
2014-06-18 18:54 ` Julien Grall
2014-06-18 19:06 ` Stefano Stabellini
2014-06-18 19:09 ` Julien Grall
2014-06-16 16:17 ` [RFC 06/19] xen/arm: Implement hypercall PHYSDEVOP_map_pirq Julien Grall
2014-06-18 19:24 ` Stefano Stabellini
2014-06-19 11:39 ` Julien Grall
2014-06-19 12:29 ` Stefano Stabellini
2014-07-03 11:27 ` Ian Campbell
2014-07-03 12:02 ` Julien Grall
2014-07-03 12:53 ` Ian Campbell
2014-07-15 13:01 ` Julien Grall
2014-07-15 13:03 ` Ian Campbell
2014-08-18 19:20 ` Andrii Tseglytskyi
2014-08-18 21:55 ` Julien Grall
2014-08-19 9:11 ` Andrii Tseglytskyi
2014-08-19 14:24 ` Julien Grall
2014-06-16 16:17 ` [RFC 07/19] xen/dts: Use unsigned int for MMIO and IRQ index Julien Grall
2014-06-18 18:54 ` Stefano Stabellini
2014-06-19 11:42 ` Julien Grall [this message]
2014-06-16 16:17 ` [RFC 08/19] xen/dts: Provide an helper to get a DT node from a path provided by a guest Julien Grall
2014-07-03 11:30 ` Ian Campbell
2014-07-03 11:49 ` Julien Grall
2014-07-03 12:13 ` Ian Campbell
2014-07-03 12:22 ` Julien Grall
2014-06-16 16:17 ` [RFC 09/19] xen/dts: Add hypercalls to retrieve device node information Julien Grall
2014-06-18 19:38 ` Stefano Stabellini
2014-06-19 11:58 ` Julien Grall
2014-06-19 12:21 ` Stefano Stabellini
2014-06-19 12:25 ` Julien Grall
2014-07-03 11:40 ` Ian Campbell
2014-06-24 8:46 ` Christoffer Dall
2014-07-03 11:34 ` Ian Campbell
2014-07-03 11:33 ` Ian Campbell
2014-07-03 11:51 ` Julien Grall
2014-07-03 12:13 ` Ian Campbell
2014-06-16 16:17 ` [RFC 10/19] xen/passthrough: Introduce iommu_buildup Julien Grall
2014-07-03 11:45 ` Ian Campbell
2014-07-03 11:55 ` Julien Grall
2014-06-16 16:17 ` [RFC 11/19] xen/passthrough: Call arch_iommu_domain_destroy before calling iommu_teardown Julien Grall
2014-06-17 8:07 ` Jan Beulich
2014-06-17 9:18 ` Julien Grall
2014-06-17 9:29 ` Jan Beulich
2014-06-17 12:38 ` Julien Grall
2014-06-17 13:04 ` Jan Beulich
2014-06-18 12:24 ` Julien Grall
2014-06-18 12:50 ` Jan Beulich
2014-06-16 16:17 ` [RFC 12/19] xen/passthrough: iommu_deassign_device_dt: By default reassign device to nobody Julien Grall
2014-06-18 19:28 ` Stefano Stabellini
2014-07-03 11:48 ` Ian Campbell
2014-07-03 12:07 ` Julien Grall
2014-07-03 12:53 ` Ian Campbell
2014-07-03 13:01 ` Julien Grall
2014-07-03 13:42 ` Ian Campbell
2014-07-03 13:51 ` Julien Grall
2014-07-03 14:04 ` Ian Campbell
2014-07-03 14:09 ` Julien Grall
2014-06-16 16:18 ` [RFC 13/19] xen/iommu: arm: Wire iommu DOMCTL for ARM Julien Grall
2014-06-17 8:24 ` Jan Beulich
2014-06-17 13:05 ` Julien Grall
2014-06-16 16:18 ` [RFC 14/19] xen/passthrough: dt: Add new domctl XEN_DOMCTL_assign_dt_device Julien Grall
2014-06-17 8:34 ` Jan Beulich
2014-06-17 13:23 ` Julien Grall
2014-06-17 13:30 ` Jan Beulich
2014-06-17 13:48 ` Julien Grall
2014-06-17 13:55 ` Jan Beulich
2014-07-03 11:54 ` Ian Campbell
2014-06-16 16:18 ` [RFC 15/19] xen/arm: Reserve region in guest memory for device passthrough Julien Grall
2014-06-18 15:12 ` Stefano Stabellini
2014-06-18 15:23 ` Julien Grall
2014-06-18 15:26 ` Ian Campbell
2014-06-18 17:48 ` Stefano Stabellini
2014-06-18 17:54 ` Julien Grall
2014-06-18 18:14 ` Stefano Stabellini
2014-06-18 18:33 ` Julien Grall
2014-06-18 18:55 ` Stefano Stabellini
2014-07-03 11:56 ` Ian Campbell
2014-06-16 16:18 ` [RFC 16/19] libxl/arm: Introduce DT_IRQ_TYPE_* Julien Grall
2014-07-03 11:56 ` Ian Campbell
2014-06-16 16:18 ` [RFC 17/19] libxl/arm: Rename set_interrupt_ppi to set_interrupt and handle SPIs Julien Grall
2014-07-03 11:58 ` Ian Campbell
2014-07-03 12:04 ` Julien Grall
2014-07-03 14:04 ` Ian Campbell
2014-06-16 16:18 ` [RFC 18/19] libxl: Add support for non-PCI passthrough Julien Grall
2014-06-16 17:19 ` Wei Liu
2014-06-18 12:26 ` Julien Grall
2014-06-16 16:18 ` [RFC 19/19] xl: Add new option dtdev Julien Grall
2014-06-16 17:19 ` Wei Liu
2014-06-18 13:40 ` Julien Grall
2014-06-18 13:43 ` Wei Liu
2014-06-18 13:46 ` Julien Grall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53A2CCA2.9020304@linaro.org \
--to=julien.grall@linaro.org \
--cc=ian.campbell@citrix.com \
--cc=stefano.stabellini@citrix.com \
--cc=stefano.stabellini@eu.citrix.com \
--cc=tim@xen.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).