From: Manish Jaggi <mjaggi@caviumnetworks.com>
To: xen-devel@lists.xen.org
Cc: Prasun.kapoor@cavium.com, "Kumar,
Vijaya" <Vijaya.Kumar@caviumnetworks.com>,
Julien Grall <julien.grall@linaro.org>,
"Stefano Stabellini (Stefano.Stabellini@citrix.com)"
<stefano.stabellini@citrix.com>,
Ian Campbell <ian.campbell@citrix.com>
Subject: RFC: [PATCH 1/3] Enhance platform support for PCI
Date: Fri, 20 Feb 2015 17:04:54 +0530 [thread overview]
Message-ID: <54E71BDE.5020106@caviumnetworks.com> (raw)
The platform APIs are enhanced to provide support for parsing pci device
tree nodes and storing the config-space address which is later used for
pci_read/pci_write config calls.
---
xen/arch/arm/platform.c | 27 +++++++++++++++++++++++++++
xen/include/asm-arm/platform.h | 18 +++++++++++++++++-
2 files changed, 44 insertions(+), 1 deletion(-)
diff --git a/xen/arch/arm/platform.c b/xen/arch/arm/platform.c
index cb4cda8..25f07d2 100644
--- a/xen/arch/arm/platform.c
+++ b/xen/arch/arm/platform.c
@@ -128,6 +128,33 @@ int __init platform_smp_init(void)
}
#endif
+int platform_pci_dt_node_init(struct dt_device_node *node, const void *data)
+{
+ if(platform->pci_dt_node_init)
+ return platform->pci_dt_node_init(node, data);
+ return -1;
+}
+
+int platform_pci_write_config(unsigned int seg, unsigned int bus,
+ unsigned int dev, unsigned int func,
+ int reg, int size, uint32_t val)
+{
+ if(platform->pci_write_config)
+ return platform->pci_write_config(seg, bus, dev, func, reg, size, val);
+
+ return -1;
+}
+
+int platform_pci_read_config(unsigned int seg, unsigned int bus,
+ unsigned int dev, unsigned int func,
+ int reg, int size, uint32_t *val)
+{
+ if(platform->pci_read_config)
+ return platform->pci_read_config(seg, bus, dev, func, reg, size, val);
+
+ return -1;
+}
+
void platform_reset(void)
{
if ( platform && platform->reset )
diff --git a/xen/include/asm-arm/platform.h b/xen/include/asm-arm/platform.h
index eefaca6..da3cc63 100644
--- a/xen/include/asm-arm/platform.h
+++ b/xen/include/asm-arm/platform.h
@@ -26,6 +26,16 @@ struct platform_desc {
void (*reset)(void);
/* Platform power-off */
void (*poweroff)(void);
+ /* PCI callback when a pci device tree node is found */
+ int (*pci_dt_node_init)(struct dt_device_node *node, const void *data);
+ /* PCI configspace read and write */
+ int (*pci_read_config)(unsigned int seg, unsigned int bus,
+ unsigned int dev, unsigned int func,
+ int reg, int size, uint32_t *val);
+
+ int (*pci_write_config)(unsigned int seg, unsigned int bus,
+ unsigned int dev, unsigned int func,
+ int reg, int size, uint32_t val);
/*
* Platform quirks
* Defined has a function because a platform can support multiple
@@ -73,7 +83,13 @@ bool_t platform_has_quirk(uint32_t quirk);
bool_t platform_device_is_blacklisted(const struct dt_device_node *node);
unsigned int platform_dom0_evtchn_ppi(void);
void platform_dom0_gnttab(paddr_t *start, paddr_t *size);
-
+int platform_pci_dt_node_init(struct dt_device_node *node, const void *data);
+int platform_pci_write_config(unsigned int seg, unsigned int bus,
+ unsigned int dev, unsigned int func,
+ int reg, int size, uint32_t val);
+int platform_pci_read_config(unsigned int seg, unsigned int bus,
+ unsigned int dev, unsigned int func,
+ int reg, int size, uint32_t *val);
#define PLATFORM_START(_name, _namestr) \
static const struct platform_desc __plat_desc_##_name __used \
__attribute__((__section__(".arch.info"))) = { \
--
1.9.1
next reply other threads:[~2015-02-20 11:34 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-20 11:34 Manish Jaggi [this message]
2015-02-20 12:03 ` RFC: [PATCH 1/3] Enhance platform support for PCI Julien Grall
2015-02-20 12:10 ` Manish Jaggi
2015-02-20 12:20 ` Julien Grall
2015-02-20 12:34 ` Manish Jaggi
2015-02-20 13:01 ` Manish Jaggi
2015-02-20 13:45 ` Ian Campbell
2015-02-20 14:11 ` Jan Beulich
2015-02-20 14:26 ` Ian Campbell
2015-02-20 14:39 ` Jan Beulich
2015-02-20 15:01 ` Ian Campbell
2015-02-20 15:13 ` Manish Jaggi
2015-02-20 15:15 ` Julien Grall
2015-02-20 15:15 ` Jan Beulich
2015-02-20 17:33 ` Ian Campbell
2015-02-23 8:43 ` Jan Beulich
2015-02-23 12:45 ` Ian Campbell
2015-02-23 14:07 ` Jan Beulich
2015-02-23 14:33 ` Ian Campbell
2015-02-23 14:45 ` Jan Beulich
2015-02-23 15:02 ` Ian Campbell
2015-02-23 15:27 ` Jan Beulich
2015-02-23 15:46 ` Ian Campbell
2015-02-23 16:20 ` Jan Beulich
2015-02-26 10:09 ` Manish Jaggi
2015-02-26 10:30 ` Jan Beulich
2015-02-26 11:05 ` Ian Campbell
2015-02-27 14:33 ` Stefano Stabellini
2015-02-27 14:42 ` Ian Campbell
2015-02-27 14:54 ` Stefano Stabellini
2015-02-27 15:24 ` Ian Campbell
2015-02-27 15:29 ` Ian Campbell
2015-02-27 16:35 ` Jan Beulich
2015-02-27 16:50 ` Ian Campbell
2015-02-27 17:15 ` Stefano Stabellini
2015-03-02 11:48 ` Ian Campbell
2015-03-03 9:19 ` Manish Jaggi
2015-03-17 5:26 ` Manish Jaggi
2015-03-17 7:28 ` Jan Beulich
2015-03-17 12:06 ` Manish Jaggi
2015-03-17 12:31 ` Jan Beulich
2015-03-18 4:05 ` Manish Jaggi
2015-03-17 13:17 ` Konrad Rzeszutek Wilk
2015-03-11 18:26 ` Stefano Stabellini
2015-03-12 9:16 ` Jan Beulich
2015-03-12 10:33 ` Stefano Stabellini
2015-03-12 11:28 ` Jan Beulich
2015-03-12 9:30 ` Ian Campbell
2015-02-20 14:14 ` Manish Jaggi
2015-02-20 14:39 ` Ian Campbell
2015-02-23 10:59 ` Manish Jaggi
2015-02-23 11:14 ` Julien Grall
2015-02-23 11:50 ` Manish Jaggi
2015-02-23 15:15 ` Julien Grall
2015-02-23 17:12 ` Manish Jaggi
2015-02-23 21:39 ` Julien Grall
2015-02-24 0:23 ` Manish Jaggi
2015-02-24 13:43 ` Julien Grall
2015-02-25 2:33 ` Manish Jaggi
2015-02-25 10:20 ` Ian Campbell
2015-02-26 10:49 ` Vijay Kilari
2015-02-26 11:12 ` Ian Campbell
2015-02-26 13:58 ` Julien Grall
2015-02-26 14:46 ` Pranavkumar Sawargaonkar
2015-02-26 15:17 ` Julien Grall
2015-02-27 10:11 ` Pranavkumar Sawargaonkar
2015-02-27 10:38 ` Ian Campbell
2015-02-27 13:22 ` Ian Campbell
2015-02-27 13:59 ` Vijay Kilari
2015-02-20 13:37 ` Ian Campbell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54E71BDE.5020106@caviumnetworks.com \
--to=mjaggi@caviumnetworks.com \
--cc=Prasun.kapoor@cavium.com \
--cc=Vijaya.Kumar@caviumnetworks.com \
--cc=ian.campbell@citrix.com \
--cc=julien.grall@linaro.org \
--cc=stefano.stabellini@citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox