xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Yang Hongyang <yanghy@cn.fujitsu.com>
To: Andrew Cooper <andrew.cooper3@citrix.com>,
	Xen-devel <xen-devel@lists.xen.org>
Cc: Wei Liu <wei.liu2@citrix.com>,
	Ian Jackson <Ian.Jackson@eu.citrix.com>,
	Ian Campbell <Ian.Campbell@citrix.com>,
	Ross Lagerwall <ross.lagerwall@citrix.com>
Subject: Re: [PATCH 20/27] tools/libxl: Infrastructure for writing a v2 stream
Date: Wed, 17 Jun 2015 15:38:24 +0800	[thread overview]
Message-ID: <558123F0.4020508@cn.fujitsu.com> (raw)
In-Reply-To: <1434375880-30914-21-git-send-email-andrew.cooper3@citrix.com>



On 06/15/2015 09:44 PM, Andrew Cooper wrote:
[...]
> +
> +static void stream_success(libxl__egc *egc,
> +                           libxl__stream_write_state *stream);
> +static void stream_failed(libxl__egc *egc,
> +                          libxl__stream_write_state *stream, int ret);
> +static void stream_done(libxl__egc *egc,
> +                        libxl__stream_write_state *stream);
> +
> +static void check_stream_finished(libxl__egc *egc,
> +                                  libxl__domain_suspend_state *dcs,

s/dcs/dss/

> +                                  int rc, const char *what);
> +
> +/* Event callbacks for plain VM. */
> +static void stream_header_done(libxl__egc *egc,
> +                               libxl__datacopier_state *dc,
> +                               int onwrite, int errnoval);
> +static void libxc_header_done(libxl__egc *egc,
> +                              libxl__datacopier_state *dc,
> +                              int onwrite, int errnoval);
> +/* libxl__xc_domain_save_done() lives here, event-order wise. */
> +static void write_toolstack_record(libxl__egc *egc,
> +                                   libxl__stream_write_state *stream);
> +static void toolstack_record_done(libxl__egc *egc,
> +                                  libxl__datacopier_state *dc,
> +                                  int onwrite, int errnoval);
> +static void write_emulator_record(libxl__egc *egc,
> +                                  libxl__stream_write_state *stream);
> +static void emulator_body_done(libxl__egc *egc,
> +                               libxl__datacopier_state *dc,
> +                               int onwrite, int errnoval);
> +static void emulator_padding_done(libxl__egc *egc,
> +                                  libxl__datacopier_state *dc,
> +                                  int onwrite, int errnoval);
> +static void write_end_record(libxl__egc *egc,
> +                             libxl__stream_write_state *stream);
> +static void end_record_done(libxl__egc *egc,
> +                            libxl__datacopier_state *dc,
> +                            int onwrite, int errnoval);
> +
> +void libxl__stream_write_start(libxl__egc *egc,
> +                               libxl__stream_write_state *stream)
> +{
> +    libxl__datacopier_state *dc = &stream->dc;
> +    STATE_AO_GC(stream->ao);
> +    struct libxl_sr_hdr hdr = { 0 };
> +    int ret = 0;
> +
> +    assert(!stream->running);
> +    stream->running = true;
> +
> +    memset(dc, 0, sizeof(*dc));
> +    dc->readwhat = "";
> +    dc->copywhat = "suspend header";
> +    dc->writewhat = "save/migration stream";
> +    dc->ao = ao;
> +    dc->readfd = -1;
> +    dc->writefd = stream->fd;
> +    dc->maxsz = INT_MAX;
> +    dc->bytes_to_read = INT_MAX;
> +    dc->callback = stream_header_done;
> +
> +    ret = libxl__datacopier_start(dc);
> +    if (ret)
> +        goto err;
> +
> +    hdr.ident   = htobe64(RESTORE_STREAM_IDENT);
> +    hdr.version = htobe32(RESTORE_STREAM_VERSION);
> +    hdr.options = htobe32(0);
> +
> +    libxl__datacopier_prefixdata(egc, dc, &hdr, sizeof(hdr));
> +    return;
> +
> + err:
> +    assert(ret);
> +    stream_failed(egc, stream, ret);
> +}
> +
> +void libxl__stream_write_abort(libxl__egc *egc,
> +                               libxl__stream_write_state *stream, int rc)
> +{
> +    stream_failed(egc, stream, rc);
> +}
> +
> +static void stream_success(libxl__egc *egc, libxl__stream_write_state *stream)
> +{
> +    stream->rc = 0;
> +    stream->running = false;
> +
> +    stream_done(egc, stream);
> +}
> +
> +static void stream_failed(libxl__egc *egc,
> +                          libxl__stream_write_state *stream, int rc)
> +{
> +    assert(rc);
> +    stream->rc = rc;
> +
> +    if (stream->running) {
> +        stream->running = false;
> +        stream_done(egc, stream);
> +    }
> +}
> +
> +static void stream_done(libxl__egc *egc,
> +                        libxl__stream_write_state *stream)
> +{
> +    libxl__domain_suspend_state *dss = CONTAINER_OF(stream, *dss, sws);
> +
> +    assert(!stream->running);
> +
> +    check_stream_finished(egc, dss, stream->rc, "stream");
> +}
> +
> +static void check_stream_finished(libxl__egc *egc,
> +                                  libxl__domain_suspend_state *dss,
> +                                  int rc, const char *what)
> +{
> +    libxl__stream_write_state *stream = &dss->sws;
> +    STATE_AO_GC(dss->ao);
> +
> +    LOG(INFO, "Task '%s' joining (rc %d)", what, rc);
> +
> +    if (rc && !stream->joined_rc) {
> +        bool skip = false;
> +        /* First reported failure from joining tasks.  Tear everything down */
> +        stream->joined_rc = rc;
> +
> +        if (libxl__stream_write_inuse(&dss->sws)) {
> +            skip = true;
> +            libxl__stream_write_abort(egc, &dss->sws, rc);
> +        }
> +
> +        if (libxl__save_helper_inuse(&dss->shs)) {
> +            skip = true;
> +            libxl__save_helper_abort(egc, &dss->shs);
> +        }
> +
> +        /* There is at least one more active task to join - wait for its
> +           callback */
> +        if ( skip )
> +            return;
> +    }
> +
> +    if (libxl__stream_write_inuse(&dss->sws))
> +        LOG(DEBUG, "stream still in use");
> +    else if (libxl__save_helper_inuse(&dss->shs))
> +        LOG(DEBUG, "save/restore still in use");
> +    else {
> +        LOG(INFO, "Join complete: result %d", stream->joined_rc);
> +        stream->completion_callback(egc, dss, stream->joined_rc);
> +    }
> +}
> +
> +static void stream_header_done(libxl__egc *egc,
> +                               libxl__datacopier_state *dc,
> +                               int onwrite, int errnoval)
> +{
> +    libxl__stream_write_state *stream = CONTAINER_OF(dc, *stream, dc);
> +    STATE_AO_GC(stream->ao);
> +    struct libxl_sr_rec_hdr rec = { REC_TYPE_LIBXC_CONTEXT, 0 };
> +    int ret = 0;
> +
> +    if (onwrite || errnoval) {
> +        ret = ERROR_FAIL;
> +        goto err;
> +    }
> +
> +    dc->copywhat = "suspend footer";
> +    dc->writewhat = "save/migration stream";
> +    dc->callback = libxc_header_done;
> +
> +    ret = libxl__datacopier_start(dc);
> +    if (ret)
> +        goto err;
> +
> +    libxl__datacopier_prefixdata(egc, dc, &rec, sizeof(rec));
> +    return;
> +
> + err:
> +    assert(ret);
> +    stream_failed(egc, stream, ret);
> +}
> +
> +static void libxc_header_done(libxl__egc *egc,
> +                              libxl__datacopier_state *dc,
> +                              int onwrite, int errnoval)
> +{
> +    libxl__stream_write_state *stream = CONTAINER_OF(dc, *stream, dc);
> +    libxl__domain_suspend_state *dss = CONTAINER_OF(stream, *dss, sws);
> +    STATE_AO_GC(stream->ao);
> +    int ret = 0;
> +
> +    if (onwrite || errnoval) {
> +        ret = ERROR_FAIL;
> +        goto err;
> +    }
> +
> +    libxl__xc_domain_save(egc, dss);
> +    return;
> +
> + err:
> +    assert(ret);
> +    stream_failed(egc, stream, ret);
> +}
> +
> +static void __attribute__((used))
> +will_be_libxl__xc_domain_save_done(libxl__egc *egc, void *dss_void,
> +                                int rc, int retval, int errnoval)
> +{
> +    libxl__domain_suspend_state *dss = dss_void;
> +    libxl__stream_write_state *stream = &dss->sws;
> +    STATE_AO_GC(dss->ao);
> +
> +    if (rc)
> +        goto err;
> +
> +    if (retval) {
> +        LOGEV(ERROR, errnoval, "saving domain: %s",
> +                         dss->guest_responded ?
> +                         "domain responded to suspend request" :
> +                         "domain did not respond to suspend request");
> +        if ( !dss->guest_responded )
> +            rc = ERROR_GUEST_TIMEDOUT;
> +        else
> +            rc = ERROR_FAIL;
> +        goto err;
> +    }
> +
> +    write_toolstack_record(egc, stream);
> +    return;
> +
> + err:
> +    assert(rc);
> +    check_stream_finished(egc, dss, rc, "save/restore helper");
> +}
> +
> +static void write_toolstack_record(libxl__egc *egc,
> +                                   libxl__stream_write_state *stream)
> +{
> +    libxl__domain_suspend_state *dss = CONTAINER_OF(stream, *dss, sws);
> +    libxl__datacopier_state *dc = &stream->dc;
> +    STATE_AO_GC(stream->ao);
> +    struct libxl_sr_rec_hdr rec = { REC_TYPE_XENSTORE_DATA, 0 };
> +    int ret = 0;
> +    uint8_t *toolstack_buf = NULL; /* We must free this. */
> +    uint32_t toolstack_len, padding_len;
> +
> +    ret = libxl__toolstack_save(dss->domid, &toolstack_buf,
> +                                &toolstack_len, dss);
> +    if (ret)
> +        goto err;
> +
> +    dc->copywhat = "toolstack record";
> +    dc->writewhat = "save/migration stream";
> +    dc->callback = toolstack_record_done;
> +
> +    ret = libxl__datacopier_start(dc);
> +    if (ret)
> +        goto err;
> +
> +    rec.length = toolstack_len;
> +
> +    libxl__datacopier_prefixdata(egc, dc, &rec, sizeof(rec));
> +    libxl__datacopier_prefixdata(egc, dc, toolstack_buf, toolstack_len);
> +
> +    padding_len = ROUNDUP(rec.length, REC_ALIGN_ORDER) - rec.length;
> +    if (padding_len)
> +        libxl__datacopier_prefixdata(egc, dc, zero_padding, padding_len);
> +
> +    free(toolstack_buf);
> +    return;
> +
> + err:
> +    assert(ret);
> +    free(toolstack_buf);
> +    stream_failed(egc, stream, ret);
> +}
> +
> +static void toolstack_record_done(libxl__egc *egc,
> +                                  libxl__datacopier_state *dc,
> +                                  int onwrite, int errnoval)
> +{
> +    libxl__stream_write_state *stream = CONTAINER_OF(dc, *stream, dc);
> +    libxl__domain_suspend_state *dss = CONTAINER_OF(stream, *dss, sws);
> +    STATE_AO_GC(stream->ao);
> +    int ret = 0;
> +
> +    if (onwrite || errnoval) {
> +        ret = ERROR_FAIL;
> +        goto err;
> +    }
> +
> +    if (dss->type == LIBXL_DOMAIN_TYPE_HVM)
> +        write_emulator_record(egc, stream);
> +    else
> +        write_end_record(egc, stream);
> +
> +    return;
> +
> + err:
> +    assert(ret);
> +    stream_failed(egc, stream, ret);
> +}
> +
> +static void write_emulator_record(libxl__egc *egc,
> +                                  libxl__stream_write_state *stream)
> +{
> +    libxl__domain_suspend_state *dss = CONTAINER_OF(stream, *dss, sws);
> +    libxl__datacopier_state *dc = &stream->dc;
> +    STATE_AO_GC(stream->ao);
> +    struct libxl_sr_rec_hdr rec = { REC_TYPE_EMULATOR_CONTEXT, 0 };
> +    struct libxl_sr_emulator_hdr ehdr = { 0 };
> +    struct stat st;
> +    int ret = 0;
> +    uint32_t qemu_state_len;
> +
> +    assert(dss->type == LIBXL_DOMAIN_TYPE_HVM);
> +
> +    /* Convenience aliases */
> +    const char *const filename = dss->dm_savefile;
> +    const uint32_t domid = dss->domid;
> +
> +    switch(libxl__device_model_version_running(gc, domid)) {
> +    case LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN_TRADITIONAL:
> +        ehdr.id = EMULATOR_QEMU_TRADITIONAL;
> +        break;
> +
> +    case LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN:
> +        ehdr.id = EMULATOR_QEMU_UPSTREAM;
> +        break;
> +
> +    default:
> +        ret = ERROR_FAIL;
> +        goto err;
> +    }
> +
> +    ret = libxl__domain_suspend_device_model(gc, dss);
> +    if (ret)
> +        goto err;
> +
> +    dc->readwhat = GCSPRINTF("qemu save file %s", filename);
> +    dc->copywhat = "emulator record";
> +    dc->writewhat = "save/migration stream";
> +    dc->callback = emulator_body_done;
> +
> +    dc->readfd = open(filename, O_RDONLY);
> +    if (dc->readfd < 0) {
> +        LOGE(ERROR, "unable to open %s", dc->readwhat);
> +        goto err;
> +    }
> +
> +    if (fstat(dc->readfd, &st))
> +    {
> +        LOGE(ERROR, "unable to fstat %s", dc->readwhat);
> +        goto err;
> +    }
> +
> +    if (!S_ISREG(st.st_mode)) {
> +        LOG(ERROR, "%s is not a plain file!", dc->readwhat);
> +        goto err;
> +    }
> +
> +    qemu_state_len = st.st_size;
> +    rec.length = qemu_state_len + sizeof(ehdr);
> +
> +    ret = libxl__datacopier_start(dc);
> +    if (ret)
> +        goto err;
> +
> +    libxl__datacopier_prefixdata(egc, dc, &rec, sizeof(rec));
> +    libxl__datacopier_prefixdata(egc, dc, &ehdr, sizeof(ehdr));
> +
> +    stream->padding = ROUNDUP(qemu_state_len, REC_ALIGN_ORDER) - qemu_state_len;
> +    return;
> +
> + err:
> +    assert(ret);
> +    stream_failed(egc, stream, ret);
> +}
> +
> +static void emulator_body_done(libxl__egc *egc,
> +                               libxl__datacopier_state *dc,
> +                               int onwrite, int errnoval)
> +{
> +    libxl__stream_write_state *stream = CONTAINER_OF(dc, *stream, dc);
> +    STATE_AO_GC(stream->ao);
> +    int ret = 0;
> +
> +    if (onwrite || errnoval) {
> +        ret = ERROR_FAIL;
> +        goto err;
> +    }
> +
> +    dc->readwhat = "";
> +    dc->readfd = -1;
> +
> +    if (stream->padding) {
> +        assert(stream->padding < (1U << REC_ALIGN_ORDER));
> +
> +        dc->copywhat = "emulator padding";
> +        dc->writewhat = "save/migration stream";
> +        dc->callback = emulator_padding_done;
> +
> +        ret = libxl__datacopier_start(dc);
> +        if (ret)
> +            goto err;
> +
> +        libxl__datacopier_prefixdata(egc, dc, zero_padding, stream->padding);
> +        return;
> +    }
> +
> +    emulator_padding_done(egc, dc, 0, 0);
> +    return;
> +
> + err:
> +    assert(ret);
> +    stream_failed(egc, stream, ret);
> +}
> +
> +static void emulator_padding_done(libxl__egc *egc,
> +                                  libxl__datacopier_state *dc,
> +                                  int onwrite, int errnoval)
> +{
> +    libxl__stream_write_state *stream = CONTAINER_OF(dc, *stream, dc);
> +    STATE_AO_GC(stream->ao);
> +    int ret = 0;
> +
> +    if (onwrite || errnoval) {
> +        ret = ERROR_FAIL;
> +        goto err;
> +    }
> +
> +    write_end_record(egc, stream);
> +    return;
> +
> + err:
> +    assert(ret);
> +    stream_failed(egc, stream, ret);
> +}
> +
> +static void write_end_record(libxl__egc *egc,
> +                             libxl__stream_write_state *stream)
> +{
> +    libxl__datacopier_state *dc = &stream->dc;
> +    STATE_AO_GC(stream->ao);
> +    struct libxl_sr_rec_hdr rec = { REC_TYPE_END, 0 };
> +    int ret = 0;
> +
> +    dc->copywhat = "suspend footer";
> +    dc->writewhat = "save/migration stream";
> +    dc->callback = end_record_done;
> +
> +    ret = libxl__datacopier_start(dc);
> +    if (ret)
> +        goto err;
> +
> +    libxl__datacopier_prefixdata(egc, dc, &rec, sizeof(rec));
> +    return;
> +
> + err:
> +    assert(ret);
> +    stream_failed(egc, stream, ret);
> +}
> +
> +static void end_record_done(libxl__egc *egc,
> +                            libxl__datacopier_state *dc,
> +                            int onwrite, int errnoval)
> +{
> +    libxl__stream_write_state *stream = CONTAINER_OF(dc, *stream, dc);
> +    STATE_AO_GC(stream->ao);
> +    int ret = 0;
> +
> +    if (onwrite || errnoval) {
> +        ret = ERROR_FAIL;
> +        goto err;
> +    }
> +
> +    stream_success(egc, stream);
> +    return;
> +
> + err:
> +    assert(ret);
> +    stream_failed(egc, stream, ret);
> +}
> +
> +/*
> + * Local variables:
> + * mode: C
> + * c-basic-offset: 4
> + * indent-tabs-mode: nil
> + * End:
> + */
>

-- 
Thanks,
Yang.

  parent reply	other threads:[~2015-06-17  7:38 UTC|newest]

Thread overview: 107+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-15 13:44 [PATCH 00/27] Libxl migration v2 Andrew Cooper
2015-06-15 13:44 ` [PATCH 01/27] tools/libxl: Fix libxl__ev_child_inuse() check for not-yet-initialised children Andrew Cooper
2015-06-16 13:21   ` Ian Campbell
2015-06-16 13:36     ` Andrew Cooper
2015-06-16 13:47       ` Ian Jackson
2015-06-16 14:05         ` Andrew Cooper
2015-06-16 15:26           ` Ian Campbell
2015-06-16 15:24       ` Ian Campbell
2015-06-16 13:39     ` Ian Jackson
2015-06-15 13:44 ` [PATCH 02/27] tools/libxc: Always compile the compat qemu variables into xc_sr_context Andrew Cooper
2015-06-16 13:22   ` Ian Campbell
2015-06-15 13:44 ` [PATCH 03/27] tools/libxl: Stash all restore parameters in domain_create_state Andrew Cooper
2015-06-16 13:37   ` Ian Campbell
2015-06-16 14:09     ` Andrew Cooper
2015-06-18  2:32   ` Yang Hongyang
2015-06-15 13:44 ` [PATCH 04/27] tools/xl: Mandatory flag indicating the format of the migration stream Andrew Cooper
2015-06-16 13:39   ` Ian Campbell
2015-06-16 14:10     ` Andrew Cooper
2015-06-15 13:44 ` [PATCH 05/27] tools/libxl: Introduce ROUNDUP() Andrew Cooper
2015-06-16 13:39   ` Ian Campbell
2015-06-15 13:44 ` [PATCH 06/27] libxl: cancellation: Preparations for save/restore cancellation Andrew Cooper
2015-06-15 13:44 ` [PATCH 07/27] libxl: cancellation: Handle SIGTERM in save/restore helper Andrew Cooper
2015-06-15 13:44 ` [PATCH 08/27] tools/libxl: Extra APIs for the save helper Andrew Cooper
2015-06-16 13:50   ` Ian Campbell
2015-06-16 15:03     ` Andrew Cooper
2015-06-15 13:44 ` [PATCH 09/27] tools/libxl: Pass restore_fd as a parameter to libxl__xc_domain_restore() Andrew Cooper
2015-06-16 13:53   ` Ian Campbell
2015-06-15 13:44 ` [PATCH 10/27] docs: Libxl migration v2 stream specification Andrew Cooper
2015-06-16 13:58   ` Ian Campbell
2015-07-08 13:49     ` Andrew Cooper
2015-07-08 13:58       ` Ian Campbell
2015-06-15 13:44 ` [PATCH 11/27] tools/python: Libxc migration v2 infrastructure Andrew Cooper
2015-06-16 14:01   ` Ian Campbell
2015-06-15 13:44 ` [PATCH 12/27] tools/python: Libxl " Andrew Cooper
2015-06-15 13:44 ` [PATCH 13/27] tools/python: Verification utility for v2 stream spec compliance Andrew Cooper
2015-06-15 13:44 ` [PATCH 14/27] tools/python: Conversion utility for legacy migration streams Andrew Cooper
2015-06-16 14:01   ` Ian Campbell
2015-06-15 13:44 ` [PATCH 15/27] tools/libxl: Migration v2 stream format Andrew Cooper
2015-06-16 14:04   ` Ian Campbell
2015-06-15 13:44 ` [PATCH 16/27] tools/libxl: Infrastructure for reading a libxl migration v2 stream Andrew Cooper
2015-06-16 14:31   ` Ian Campbell
2015-06-16 15:01     ` Andrew Cooper
2015-06-16 15:35       ` Ian Campbell
2015-06-16 15:46         ` Andrew Cooper
2015-06-17  3:09   ` Wen Congyang
2015-06-17 10:15     ` Ian Campbell
2015-06-17 10:49       ` Wen Congyang
2015-06-17 10:55         ` Ian Campbell
2015-06-17  6:03   ` Wen Congyang
2015-06-17  9:47     ` Andrew Cooper
2015-06-17  7:57   ` Wen Congyang
2015-06-17  9:50     ` Andrew Cooper
2015-06-17 10:01       ` Wen Congyang
2015-06-17 10:48         ` Andrew Cooper
2015-06-15 13:44 ` [PATCH 17/27] tools/libxl: Support converting a legacy stream to a " Andrew Cooper
2015-06-16 14:38   ` Ian Campbell
2015-06-16 15:13     ` Andrew Cooper
2015-06-16 15:38       ` Ian Campbell
2015-06-15 13:44 ` [PATCH 18/27] tools/libxl: Convert a legacy stream if needed Andrew Cooper
2015-06-15 13:44 ` [PATCH 19/27] tools/libxc+libxl+xl: Restore v2 streams Andrew Cooper
2015-06-16 14:53   ` Ian Campbell
2015-06-16 15:23     ` Andrew Cooper
2015-06-16 15:39       ` Ian Campbell
2015-06-15 13:44 ` [PATCH 20/27] tools/libxl: Infrastructure for writing a v2 stream Andrew Cooper
2015-06-16 14:57   ` Ian Campbell
2015-06-16 15:28     ` Andrew Cooper
2015-06-17  1:31   ` Yang Hongyang
2015-06-17  9:51     ` Andrew Cooper
2015-06-17  1:39   ` Wen Congyang
2015-06-17  2:24   ` Wen Congyang
2015-06-17  7:38   ` Yang Hongyang [this message]
2015-06-17 10:14   ` Wen Congyang
2015-07-10 10:55   ` Ian Campbell
2015-07-10 11:03     ` Andrew Cooper
2015-07-10 11:05       ` Ian Campbell
2015-06-15 13:44 ` [PATCH 21/27] tools/libxc+libxl+xl: Save v2 streams Andrew Cooper
2015-06-16 14:59   ` Ian Campbell
2015-06-15 13:44 ` [PATCH 22/27] docs/libxl: [RFC] Introduce CHECKPOINT_END to support migration v2 remus streams Andrew Cooper
2015-06-16 15:00   ` Ian Campbell
2015-06-16 15:30     ` Andrew Cooper
2015-06-17  3:30   ` Wen Congyang
2015-06-15 13:44 ` [PATCH 23/27] tools/libxl: [RFC] Write checkpoint records into the stream Andrew Cooper
2015-06-16 15:03   ` Ian Campbell
2015-06-16 15:53     ` Andrew Cooper
2015-06-17  7:30       ` Ian Campbell
2015-06-17  9:55         ` Andrew Cooper
2015-06-18  3:13   ` Wen Congyang
2015-06-18  9:44     ` Andrew Cooper
2015-06-15 13:44 ` [PATCH 24/27] tools/libx{c, l}: [RFC] Introduce restore_callbacks.checkpoint() Andrew Cooper
2015-06-16  2:23   ` Yang Hongyang
2015-06-17  8:20   ` Yang Hongyang
2015-06-15 13:44 ` [PATCH 25/27] tools/libxl: [RFC] Handle checkpoint records in a libxl migration v2 stream Andrew Cooper
2015-06-17  7:28   ` Wen Congyang
2015-06-15 13:44 ` [PATCH 26/27] tools/libxc: Drop all XG_LIBXL_HVM_COMPAT code from libxc Andrew Cooper
2015-06-16 15:03   ` Ian Campbell
2015-06-15 13:44 ` [PATCH 27/27] tools/libxl: Drop all knowledge of toolstack callbacks Andrew Cooper
2015-06-16 15:04   ` Ian Campbell
2015-06-16 15:06     ` Andrew Cooper
2015-06-17 10:14       ` Ian Campbell
2015-06-17 10:43         ` Andrew Cooper
2015-06-17 10:53           ` Ian Campbell
2015-06-16  2:21 ` [PATCH 00/27] Libxl migration v2 Yang Hongyang
2015-06-17  1:55 ` Wen Congyang
2015-06-17  9:45   ` Andrew Cooper
2015-07-02  7:33 ` Yang Hongyang
2015-07-02  9:26   ` Andrew Cooper
2015-07-02  9:33     ` Yang Hongyang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=558123F0.4020508@cn.fujitsu.com \
    --to=yanghy@cn.fujitsu.com \
    --cc=Ian.Campbell@citrix.com \
    --cc=Ian.Jackson@eu.citrix.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=ross.lagerwall@citrix.com \
    --cc=wei.liu2@citrix.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).