From: "Chen, Tiejun" <tiejun.chen@intel.com>
To: George Dunlap <George.Dunlap@eu.citrix.com>
Cc: Keir Fraser <keir@xen.org>,
Ian Campbell <ian.campbell@citrix.com>,
Stefano Stabellini <stefano.stabellini@eu.citrix.com>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Ian Jackson <ian.jackson@eu.citrix.com>,
"xen-devel@lists.xen.org" <xen-devel@lists.xen.org>,
Jan Beulich <jbeulich@suse.com>, Wei Liu <wei.liu2@citrix.com>
Subject: Re: [v8][PATCH 07/16] hvmloader/e820: construct guest e820 table
Date: Thu, 16 Jul 2015 21:12:12 +0800 [thread overview]
Message-ID: <55A7ADAC.1010004@intel.com> (raw)
In-Reply-To: <CAFLBxZZVMifw5CTLPQOtqOsWq6YGMjCS6T8BdH7-0280txV3mQ@mail.gmail.com>
>> + /*
>> + * And then we also need to adjust highmem.
>> + */
>> + if ( add_high_mem )
>> + {
>> + for ( i = 0; i < nr; i++ )
>> + {
>> + if ( e820[i].type == E820_RAM &&
>> + e820[i].addr == (1ull << 32))
>> + {
>> + e820[i].size += add_high_mem;
>> + add_high_mem = 0;
>> + break;
>> + }
>> + }
>> + }
>> +
>> + /* Or this is just populated by hvmloader itself. */
>
> This should probably say something like:
>
> "If there was no highmem region, we need to create one."
Okay, "If there was no highmem entry, we need to create one."
>
>> + if ( add_high_mem )
>> + {
>> + /*
>> + * hvmloader should always update hvm_info->high_mem_pgend
>> + * when it relocates RAM anywhere.
>> + */
>> + BUG_ON( !hvm_info->high_mem_pgend );
>> +
>> e820[nr].addr = ((uint64_t)1 << 32);
>> e820[nr].size =
>> ((uint64_t)hvm_info->high_mem_pgend << PAGE_SHIFT) - e820[nr].addr;
>
> In theory add_high_mem and hvm_info->high_mem_pgend << PAGE_SHIFT -
> 4GiB is the same, but it seems like asking for trouble to assume so
No, its not true in the first if( add_high_mem ) conditional.
Before we enter hvmloader, there are two cases:
#1. hvm_info->high_mem_pgend == 0
So we wouldn't have a highmem entry in e820. But hvmloader may relocate
RAM upward highmem (add_high_mem) to get sufficient mmio, so
hvm_info->high_mem_pgend is expanded somewhere (4GiB + add_high_mem).
Then we would fall into the second if( add_high_mem ) conditional.
#2. hvm_info->high_mem_pgend != 0
We always walk into the first if( add_high_mem ) conditional. But here
"add_high_mem" just represents that highmem section expanded by
hvmloader, its really not the whole higmem:(hvm_info->high_mem_pgend <<
PAGE_SHIFT - 4GiB).
Thanks
Tiejun
> without checking.
>
> Perhaps in the first if( add_high_mem ) conditional, you can
> BUG_ON(add_high_mem != ((hvm_info->high_mem_pgend << PAGE_SHIFT) -
> (ull1 << 32))) ?
>
> Other than that, this looks good, thanks.
>
> -George
>
next prev parent reply other threads:[~2015-07-16 13:12 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-17 0:45 [v9][PATCH 00/16] Fix RMRR Tiejun Chen
2015-07-17 0:45 ` [v9][PATCH 01/16] xen: introduce XENMEM_reserved_device_memory_map Tiejun Chen
2015-07-17 0:45 ` [v9][PATCH 02/16] xen/vtd: create RMRR mapping Tiejun Chen
2015-07-17 0:45 ` [v9][PATCH 03/16] xen/passthrough: extend hypercall to support rdm reservation policy Tiejun Chen
2015-07-17 6:48 ` Jan Beulich
2015-07-20 1:12 ` Tian, Kevin
2015-07-17 0:45 ` [v9][PATCH 04/16] xen: enable XENMEM_memory_map in hvm Tiejun Chen
2015-07-17 0:45 ` [v9][PATCH 05/16] hvmloader: get guest memory map into memory_map[] Tiejun Chen
2015-07-17 0:45 ` [v9][PATCH 06/16] hvmloader/pci: disable all pci devices conflicting with rdm Tiejun Chen
2015-07-17 13:59 ` Jan Beulich
2015-07-17 14:24 ` Chen, Tiejun
2015-07-17 0:45 ` [v9][PATCH 07/16] hvmloader/e820: construct guest e820 table Tiejun Chen
2015-07-17 7:40 ` Jan Beulich
2015-07-17 9:09 ` Chen, Tiejun
2015-07-17 10:50 ` Jan Beulich
2015-07-17 15:22 ` Chen, Tiejun
2015-07-17 15:31 ` Jan Beulich
2015-07-17 15:54 ` Chen, Tiejun
2015-07-17 16:06 ` Jan Beulich
2015-07-17 16:10 ` Chen, Tiejun
2015-07-18 12:35 ` George Dunlap
2015-07-20 6:19 ` Chen, Tiejun
2015-07-17 9:27 ` Chen, Tiejun
2015-07-17 10:53 ` Jan Beulich
2015-07-17 0:45 ` [v9][PATCH 08/16] tools/libxc: Expose new hypercall xc_reserved_device_memory_map Tiejun Chen
2015-07-17 0:45 ` [v9][PATCH 09/16] tools: extend xc_assign_device() to support rdm reservation policy Tiejun Chen
2015-07-17 0:45 ` [v9][PATCH 10/16] tools: introduce some new parameters to set rdm policy Tiejun Chen
2015-07-17 0:45 ` [v9][PATCH 11/16] tools/libxl: detect and avoid conflicts with RDM Tiejun Chen
2015-07-17 0:45 ` [v9][PATCH 12/16] tools: introduce a new parameter to set a predefined rdm boundary Tiejun Chen
2015-07-17 0:45 ` [v9][PATCH 13/16] libxl: construct e820 map with RDM information for HVM guest Tiejun Chen
2015-07-16 6:52 ` [v8][PATCH 00/16] Fix RMRR Tiejun Chen
2015-07-16 6:52 ` [v8][PATCH 01/16] xen: introduce XENMEM_reserved_device_memory_map Tiejun Chen
2015-07-16 6:52 ` [v8][PATCH 02/16] xen/vtd: create RMRR mapping Tiejun Chen
2015-07-16 6:52 ` [v8][PATCH 03/16] xen/passthrough: extend hypercall to support rdm reservation policy Tiejun Chen
2015-07-16 7:40 ` Jan Beulich
2015-07-16 7:48 ` Chen, Tiejun
2015-07-16 7:58 ` Jan Beulich
2015-07-16 11:09 ` George Dunlap
2015-07-16 6:52 ` [v8][PATCH 04/16] xen: enable XENMEM_memory_map in hvm Tiejun Chen
2015-07-16 6:52 ` [v8][PATCH 05/16] hvmloader: get guest memory map into memory_map[] Tiejun Chen
2015-07-16 9:18 ` Jan Beulich
2015-07-16 11:15 ` George Dunlap
2015-07-16 6:52 ` [v8][PATCH 06/16] hvmloader/pci: disable all pci devices conflicting with rdm Tiejun Chen
2015-07-16 11:32 ` George Dunlap
2015-07-16 11:52 ` Chen, Tiejun
2015-07-16 13:02 ` George Dunlap
2015-07-16 13:21 ` Chen, Tiejun
2015-07-16 13:32 ` Jan Beulich
2015-07-16 13:48 ` Chen, Tiejun
2015-07-16 14:54 ` Jan Beulich
2015-07-16 15:20 ` Chen, Tiejun
2015-07-16 15:39 ` George Dunlap
2015-07-16 16:08 ` Chen, Tiejun
2015-07-16 16:40 ` George Dunlap
2015-07-16 21:24 ` Chen, Tiejun
2015-07-16 16:18 ` George Dunlap
2015-07-16 16:31 ` George Dunlap
2015-07-16 21:15 ` Chen, Tiejun
2015-07-17 9:26 ` George Dunlap
2015-07-17 10:55 ` Jan Beulich
2015-07-16 6:52 ` [v8][PATCH 07/16] hvmloader/e820: construct guest e820 table Tiejun Chen
2015-07-16 11:47 ` George Dunlap
2015-07-16 13:12 ` Chen, Tiejun [this message]
2015-07-16 14:29 ` George Dunlap
2015-07-16 15:04 ` Chen, Tiejun
2015-07-16 15:16 ` George Dunlap
2015-07-16 15:29 ` Chen, Tiejun
2015-07-16 15:33 ` George Dunlap
2015-07-16 15:42 ` Chen, Tiejun
2015-07-16 6:52 ` [v8][PATCH 08/16] tools/libxc: Expose new hypercall xc_reserved_device_memory_map Tiejun Chen
2015-07-16 6:52 ` [v8][PATCH 09/16] tools: extend xc_assign_device() to support rdm reservation policy Tiejun Chen
2015-07-16 6:52 ` [v8][PATCH 10/16] tools: introduce some new parameters to set rdm policy Tiejun Chen
2015-07-16 6:52 ` [v8][PATCH 11/16] tools/libxl: detect and avoid conflicts with RDM Tiejun Chen
2015-07-16 6:52 ` [v8][PATCH 12/16] tools: introduce a new parameter to set a predefined rdm boundary Tiejun Chen
2015-07-16 6:52 ` [v8][PATCH 13/16] libxl: construct e820 map with RDM information for HVM guest Tiejun Chen
2015-07-22 13:55 ` [v8][PATCH 13/16] libxl: construct e820 map with RDM information for HVM guest [and 1 more messages] Ian Jackson
2015-07-16 6:53 ` [v8][PATCH 14/16] xen/vtd: enable USB device assignment Tiejun Chen
2015-07-16 6:53 ` [v8][PATCH 15/16] xen/vtd: prevent from assign the device with shared rmrr Tiejun Chen
2015-07-16 7:42 ` Jan Beulich
2015-07-16 6:53 ` [v8][PATCH 16/16] tools: parse to enable new rdm policy parameters Tiejun Chen
2015-07-17 0:45 ` [v9][PATCH 14/16] xen/vtd: enable USB device assignment Tiejun Chen
2015-07-17 0:45 ` [v9][PATCH 15/16] xen/vtd: prevent from assign the device with shared rmrr Tiejun Chen
2015-07-17 0:45 ` [v9][PATCH 16/16] tools: parse to enable new rdm policy parameters Tiejun Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55A7ADAC.1010004@intel.com \
--to=tiejun.chen@intel.com \
--cc=George.Dunlap@eu.citrix.com \
--cc=andrew.cooper3@citrix.com \
--cc=ian.campbell@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=keir@xen.org \
--cc=stefano.stabellini@eu.citrix.com \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).