From: Andrew Cooper <andrew.cooper3@citrix.com>
To: Benjamin Sanda <ben.sanda@dornerworks.com>,
xen-devel@lists.xenproject.org
Cc: Wei Liu <wei.liu2@citrix.com>,
George Dunlap <george.dunlap@eu.citrix.com>,
Tim Deegan <tim@xen.org>, Ian Jackson <ian.jackson@eu.citrix.com>,
Julien Grall <julien.grall@arm.com>,
Stefano Stabellini <stefano.stabellini@citrix.com>,
Jan Beulich <jbeulich@suse.com>, Keir Fraser <keir@xen.org>
Subject: Re: [PATCH v3 1/5] xentrace: Common Support for get_pg_owner/put_pg_owner on ARM and x86
Date: Tue, 5 Apr 2016 00:05:06 +0100 [thread overview]
Message-ID: <5702F322.6090604@citrix.com> (raw)
In-Reply-To: <1459795727-3116-2-git-send-email-ben.sanda@dornerworks.com>
On 04/04/2016 19:48, Benjamin Sanda wrote:
> Moved get_pg_owner() and put_pg_owner() from the arch specific x86
> mm.c source files into the common page_alloc.c source. This was done
> as theses functions are now needed by both architectures to support
> xentrace on the ARM platform. Forward declarations were added to mm.h.
>
> One conditional compilation check was added in get_pg_owner() for the
> is_pvh_domain(curr) check which is only valid to perform on x86
> platforms.
>
> Signed-off-by: Benjamin Sanda <ben.sanda@dornerworks.com>
>
> ---
> Changed since v2:
> * Combined patches 3-5 from v2 into one patch for v3. No code change.
> ---
> xen/arch/x86/mm.c | 48 ----------------------------------------------
> xen/common/page_alloc.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++
> xen/include/xen/mm.h | 2 ++
> 3 files changed, 53 insertions(+), 48 deletions(-)
>
> diff --git a/xen/arch/x86/mm.c b/xen/arch/x86/mm.c
> index c997b53..0d695dd 100644
> --- a/xen/arch/x86/mm.c
> +++ b/xen/arch/x86/mm.c
> @@ -2998,54 +2998,6 @@ int new_guest_cr3(unsigned long mfn)
> return rc;
> }
>
> -static struct domain *get_pg_owner(domid_t domid)
> -{
> - struct domain *pg_owner = NULL, *curr = current->domain;
> -
> - if ( likely(domid == DOMID_SELF) )
> - {
> - pg_owner = rcu_lock_current_domain();
> - goto out;
> - }
> -
> - if ( unlikely(domid == curr->domain_id) )
> - {
> - MEM_LOG("Cannot specify itself as foreign domain");
> - goto out;
> - }
> -
> - if ( !is_pvh_domain(curr) && unlikely(paging_mode_translate(curr)) )
> - {
> - MEM_LOG("Cannot mix foreign mappings with translated domains");
> - goto out;
> - }
> -
> - switch ( domid )
> - {
> - case DOMID_IO:
> - pg_owner = rcu_lock_domain(dom_io);
> - break;
> - case DOMID_XEN:
> - pg_owner = rcu_lock_domain(dom_xen);
> - break;
> - default:
> - if ( (pg_owner = rcu_lock_domain_by_id(domid)) == NULL )
> - {
> - MEM_LOG("Unknown domain '%u'", domid);
> - break;
> - }
> - break;
> - }
> -
> - out:
> - return pg_owner;
> -}
> -
> -static void put_pg_owner(struct domain *pg_owner)
> -{
> - rcu_unlock_domain(pg_owner);
> -}
> -
> static inline int vcpumask_to_pcpumask(
> struct domain *d, XEN_GUEST_HANDLE_PARAM(const_void) bmap, cpumask_t *pmask)
> {
> diff --git a/xen/common/page_alloc.c b/xen/common/page_alloc.c
> index 98e30e5..8fe9c03 100644
> --- a/xen/common/page_alloc.c
> +++ b/xen/common/page_alloc.c
> @@ -145,6 +145,7 @@
> #ifdef CONFIG_X86
> #include <asm/p2m.h>
> #include <asm/setup.h> /* for highmem_start only */
> +#include <asm/paging.h>
> #else
> #define p2m_pod_offline_or_broken_hit(pg) 0
> #define p2m_pod_offline_or_broken_replace(pg) BUG_ON(pg != NULL)
> @@ -1996,6 +1997,56 @@ static __init int register_heap_trigger(void)
> }
> __initcall(register_heap_trigger);
>
> +struct domain *get_pg_owner(domid_t domid)
> +{
> + struct domain *pg_owner = NULL, *curr = current->domain;
> +
> + if ( likely(domid == DOMID_SELF) )
> + {
> + pg_owner = rcu_lock_current_domain();
> + goto out;
> + }
> +
> + if ( unlikely(domid == curr->domain_id) )
> + {
> + gdprintk(XENLOG_WARNING,"Cannot specify itself as foreign domain");
> + goto out;
> + }
> +
> +#ifdef CONFIG_X86
> + if ( !is_pvh_domain(curr) && unlikely(paging_mode_translate(curr)) )
> + {
> + gdprintk(XENLOG_WARNING,"Cannot mix foreign mappings with translated domains");
Space after comma.
> + goto out;
> + }
> +#endif
> +
> + switch ( domid )
> + {
> + case DOMID_IO:
> + pg_owner = rcu_lock_domain(dom_io);
> + break;
> + case DOMID_XEN:
> + pg_owner = rcu_lock_domain(dom_xen);
> + break;
> + default:
> + if ( (pg_owner = rcu_lock_domain_by_id(domid)) == NULL )
> + {
> + gdprintk(XENLOG_WARNING,"Unknown domain '%u'", domid);
While changing this code, please use d%d for the domain id, to be
consistent with the newer style.
With these two minor issues fixed, Reviewed-by: Andrew Cooper
<andrew.cooper3@citrix.com>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-04-04 23:05 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-04 18:48 [PATCH v3 0/5] xentrace/xenalyze Support on ARM Benjamin Sanda
2016-04-04 18:48 ` [PATCH v3 1/5] xentrace: Common Support for get_pg_owner/put_pg_owner on ARM and x86 Benjamin Sanda
2016-04-04 23:05 ` Andrew Cooper [this message]
2016-04-05 8:12 ` Jan Beulich
2016-04-14 19:59 ` Ben Sanda
2016-04-17 7:58 ` Jan Beulich
2016-04-04 18:48 ` [PATCH v3 2/5] xentrace: Memory/Page Mapping support for DOMID_XEN on ARM Benjamin Sanda
2016-04-08 10:42 ` Julien Grall
2016-04-08 15:49 ` Jan Beulich
2016-04-08 17:58 ` Andrew Cooper
2016-04-11 9:52 ` George Dunlap
2016-04-12 15:53 ` Julien Grall
2016-04-14 19:52 ` Ben Sanda
2016-04-20 12:48 ` Julien Grall
2016-04-22 9:42 ` Stefano Stabellini
2016-04-22 17:01 ` Julien Grall
2016-04-04 18:48 ` [PATCH v3 3/5] xentrace: Timestamp support for ARM platform Benjamin Sanda
2016-04-08 10:50 ` Julien Grall
2016-04-11 14:56 ` Konrad Rzeszutek Wilk
2016-04-04 18:48 ` [PATCH v3 4/5] xentrace: Trace Buffer Initialization on ARM Benjamin Sanda
2016-04-08 10:53 ` Julien Grall
2016-04-04 18:48 ` [PATCH v3 5/5] xenalyze: Build for Both ARM and x86 Platforms Benjamin Sanda
2016-04-05 8:09 ` [PATCH v3 0/5] xentrace/xenalyze Support on ARM Jan Beulich
2016-04-06 16:51 ` Ben Sanda
2016-04-06 16:59 ` Andrew Cooper
2016-04-06 17:03 ` Ben Sanda
2016-04-08 14:44 ` George Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5702F322.6090604@citrix.com \
--to=andrew.cooper3@citrix.com \
--cc=ben.sanda@dornerworks.com \
--cc=george.dunlap@eu.citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=julien.grall@arm.com \
--cc=keir@xen.org \
--cc=stefano.stabellini@citrix.com \
--cc=tim@xen.org \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).