From: George Dunlap <george.dunlap@citrix.com>
To: Paulina Szubarczyk <paulinaszubarczyk@gmail.com>,
xen-devel@lists.xenproject.org, roger.pau@citrix.com,
George.Dunlap@eu.citrix.com
Cc: ian.jackson@eu.citrix.com, dario.faggioli@citrix.com,
wei.liu2@citrix.com, ian.campbell@citrix.com
Subject: Re: [PATCH v3 5/7] xl: improve main_tmem_* return codes
Date: Thu, 21 Apr 2016 10:43:02 +0100 [thread overview]
Message-ID: <5718A0A6.2090501@citrix.com> (raw)
In-Reply-To: <1461139444-12342-6-git-send-email-paulinaszubarczyk@gmail.com>
On 20/04/16 09:04, Paulina Szubarczyk wrote:
> Functions libxl_tmem_freeze(), libxl_tmem_thaw(), libxl_tmem_set() and
> libxl_tmem_shared_auth() located in libxl.c file return
> ERROR_FAIL/ERROR_INVAL or internal error codes from libxc library
> improve main_tmem_* return codes by returning EXIT_{SUCCESS/FAILURE}
> accordingly to return codes of those functions.
>
> Signed-off-by: Paulina Szubarczyk <paulinaszubarczyk@gmail.com>
> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
> Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Paulina,
These patches are all basically independent, right?
If you move as many of the patches which have suitable Acked /
Reviewed-by's to the front of the series on the next iteration, then a
committer can check in the ones which are ready to be checked in
immediately, and subsequent series (if any) can be much shorter.
Although at this point it's more complicated because they now also need
a release ack to be checked in. :-)
-George
> ---
> tools/libxl/xl_cmdimpl.c | 51 ++++++++++++++++++++++++++++--------------------
> 1 file changed, 30 insertions(+), 21 deletions(-)
>
> diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
> index 6bef201..d646927 100644
> --- a/tools/libxl/xl_cmdimpl.c
> +++ b/tools/libxl/xl_cmdimpl.c
> @@ -7817,11 +7817,11 @@ int main_tmem_list(int argc, char **argv)
>
> buf = libxl_tmem_list(ctx, domid, use_long);
> if (buf == NULL)
> - return -1;
> + return EXIT_FAILURE;
>
> printf("%s\n", buf);
> free(buf);
> - return 0;
> + return EXIT_SUCCESS;
> }
>
> int main_tmem_freeze(int argc, char **argv)
> @@ -7841,7 +7841,7 @@ int main_tmem_freeze(int argc, char **argv)
> if (!dom && all == 0) {
> fprintf(stderr, "You must specify -a or a domain id.\n\n");
> help("tmem-freeze");
> - return 1;
> + return EXIT_FAILURE;
> }
>
> if (all)
> @@ -7849,8 +7849,10 @@ int main_tmem_freeze(int argc, char **argv)
> else
> domid = find_domain(dom);
>
> - libxl_tmem_freeze(ctx, domid);
> - return 0;
> + if (libxl_tmem_freeze(ctx, domid) < 0)
> + return EXIT_FAILURE;
> +
> + return EXIT_SUCCESS;
> }
>
> int main_tmem_thaw(int argc, char **argv)
> @@ -7870,7 +7872,7 @@ int main_tmem_thaw(int argc, char **argv)
> if (!dom && all == 0) {
> fprintf(stderr, "You must specify -a or a domain id.\n\n");
> help("tmem-thaw");
> - return 1;
> + return EXIT_FAILURE;
> }
>
> if (all)
> @@ -7878,8 +7880,10 @@ int main_tmem_thaw(int argc, char **argv)
> else
> domid = find_domain(dom);
>
> - libxl_tmem_thaw(ctx, domid);
> - return 0;
> + if (libxl_tmem_thaw(ctx, domid) < 0)
> + return EXIT_FAILURE;
> +
> + return EXIT_SUCCESS;
> }
>
> int main_tmem_set(int argc, char **argv)
> @@ -7890,6 +7894,7 @@ int main_tmem_set(int argc, char **argv)
> int opt_w = 0, opt_c = 0, opt_p = 0;
> int all = 0;
> int opt;
> + int rc = 0;
>
> SWITCH_FOREACH_OPT(opt, "aw:c:p:", NULL, "tmem-set", 0) {
> case 'a':
> @@ -7913,7 +7918,7 @@ int main_tmem_set(int argc, char **argv)
> if (!dom && all == 0) {
> fprintf(stderr, "You must specify -a or a domain id.\n\n");
> help("tmem-set");
> - return 1;
> + return EXIT_FAILURE;
> }
>
> if (all)
> @@ -7924,17 +7929,20 @@ int main_tmem_set(int argc, char **argv)
> if (!opt_w && !opt_c && !opt_p) {
> fprintf(stderr, "No set value specified.\n\n");
> help("tmem-set");
> - return 1;
> + return EXIT_FAILURE;
> }
>
> if (opt_w)
> - libxl_tmem_set(ctx, domid, "weight", weight);
> + rc = libxl_tmem_set(ctx, domid, "weight", weight);
> if (opt_c)
> - libxl_tmem_set(ctx, domid, "cap", cap);
> + rc = libxl_tmem_set(ctx, domid, "cap", cap);
> if (opt_p)
> - libxl_tmem_set(ctx, domid, "compress", compress);
> + rc = libxl_tmem_set(ctx, domid, "compress", compress);
>
> - return 0;
> + if (rc < 0)
> + return EXIT_FAILURE;
> +
> + return EXIT_SUCCESS;
> }
>
> int main_tmem_shared_auth(int argc, char **argv)
> @@ -7964,7 +7972,7 @@ int main_tmem_shared_auth(int argc, char **argv)
> if (!dom && all == 0) {
> fprintf(stderr, "You must specify -a or a domain id.\n\n");
> help("tmem-shared-auth");
> - return 1;
> + return EXIT_FAILURE;
> }
>
> if (all)
> @@ -7975,18 +7983,19 @@ int main_tmem_shared_auth(int argc, char **argv)
> if (uuid == NULL || autharg == NULL) {
> fprintf(stderr, "No uuid or auth specified.\n\n");
> help("tmem-shared-auth");
> - return 1;
> + return EXIT_FAILURE;
> }
>
> auth = strtol(autharg, &endptr, 10);
> if (*endptr != '\0') {
> fprintf(stderr, "Invalid auth, valid auth are <0|1>.\n\n");
> - return 1;
> + return EXIT_FAILURE;
> }
>
> - libxl_tmem_shared_auth(ctx, domid, uuid, auth);
> + if (libxl_tmem_shared_auth(ctx, domid, uuid, auth) < 0)
> + return EXIT_FAILURE;
>
> - return 0;
> + return EXIT_SUCCESS;
> }
>
> int main_tmem_freeable(int argc, char **argv)
> @@ -8000,10 +8009,10 @@ int main_tmem_freeable(int argc, char **argv)
>
> mb = libxl_tmem_freeable(ctx);
> if (mb == -1)
> - return -1;
> + return EXIT_FAILURE;
>
> printf("%d\n", mb);
> - return 0;
> + return EXIT_SUCCESS;
> }
>
> int main_cpupoolcreate(int argc, char **argv)
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-04-21 9:44 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-20 8:03 [PATCH v3 00/10] xl: improve coding style and return more failure on Paulina Szubarczyk
2016-04-20 8:03 ` [PATCH v3 1/7] libxl: improve return codes for some pci related functions Paulina Szubarczyk
2016-04-20 20:28 ` Olaf Hering
2016-04-27 14:31 ` Wei Liu
2016-04-20 8:03 ` [PATCH v3 2/7] libxl: style cleanups in libxl_device_pci_assignable_list() Paulina Szubarczyk
2016-04-20 20:24 ` Olaf Hering
2016-04-21 7:17 ` Paulina Szubarczyk
2016-04-20 8:04 ` [PATCH v3 3/7] xl_cmdimpl: improve return codes for cd-insert commands Paulina Szubarczyk
2016-04-20 20:30 ` Olaf Hering
2016-04-20 8:04 ` [PATCH v3 4/7] xl_cmdimpl - Add return codes for pci-detach, pci-attach, pci-asssignable-add, and pci-assignable-remove Paulina Szubarczyk
2016-04-27 14:31 ` Wei Liu
2016-04-20 8:04 ` [PATCH v3 5/7] xl: improve main_tmem_* return codes Paulina Szubarczyk
2016-04-21 9:43 ` George Dunlap [this message]
2016-04-27 14:31 ` Wei Liu
2016-04-20 8:04 ` [PATCH v3 6/7] libxl: Fix libxl_set_memory_target return value Paulina Szubarczyk
2016-04-20 20:56 ` Olaf Hering
2016-04-27 14:29 ` Wei Liu
2016-05-09 8:21 ` Paulina Szubarczyk
2016-05-09 9:48 ` George Dunlap
2016-05-09 11:15 ` Wei Liu
2016-04-20 8:04 ` [PATCH v3 7/7] libxl: libxl_tmem functions improving coding style Paulina Szubarczyk
2016-04-20 21:04 ` Olaf Hering
2016-04-27 14:31 ` Wei Liu
2016-04-27 16:53 ` Dario Faggioli
2016-04-27 16:59 ` Wei Liu
2016-04-27 14:33 ` [PATCH v3 00/10] xl: improve coding style and return more failure on Wei Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5718A0A6.2090501@citrix.com \
--to=george.dunlap@citrix.com \
--cc=George.Dunlap@eu.citrix.com \
--cc=dario.faggioli@citrix.com \
--cc=ian.campbell@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=paulinaszubarczyk@gmail.com \
--cc=roger.pau@citrix.com \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).