From: Julien Grall <julien.grall@arm.com>
To: Jan Beulich <JBeulich@suse.com>, wei.liu2@citrix.com
Cc: tim@xen.org, sstabellini@kernel.org, andrew.cooper3@citrix.com,
Ian.Jackson@eu.citrix.com, george.dunlap@citrix.com,
xen-devel@lists.xen.org, shannon.zhao@linaro.org
Subject: Re: [for-4.7 1/2] xen: XENMEM_add_physmap_batch: Mark 'foreign_id' as reserved for dev_mmio
Date: Wed, 25 May 2016 15:28:34 +0100 [thread overview]
Message-ID: <5745B692.7030003@arm.com> (raw)
In-Reply-To: <5745C0DE02000078000EEADC@prv-mh.provo.novell.com>
Hi Jan,
On 25/05/16 14:12, Jan Beulich wrote:
>>>> On 25.05.16 at 13:41, <julien.grall@arm.com> wrote:
>> --- a/xen/arch/arm/mm.c
>> +++ b/xen/arch/arm/mm.c
>> @@ -1143,6 +1143,10 @@ int xenmem_add_to_physmap_one(
>> break;
>> }
>> case XENMAPSPACE_dev_mmio:
>> + /* The field 'foreign_domid' is reserved for future use */
>> + if ( foreign_domid )
>> + return -ENOSYS;
>
> This should return -EINVAL or maybe -EOPNOTSUPP, but
> definitely not -ENOSYS.
I will use -EOPNOTSUPP.
>
>> --- a/xen/common/memory.c
>> +++ b/xen/common/memory.c
>> @@ -639,9 +639,11 @@ static int xenmem_add_to_physmap(struct domain *d,
>> {
>> unsigned int done = 0;
>> long rc = 0;
>> + /* The field 'foreign_id' should be 0 when mapping MMIO. */
>> + domid_t inv = (xatp->space != XENMAPSPACE_dev_mmio) ? DOMID_INVALID : 0;
>
> This is a bad type for something that now isn't a domain ID anymore.
> Please use u16 or even better unsigned int. Eventually we should
> fix xenmem_add_to_physmap_one()'s respective parameter type
> accordingly.
>
> Also I think the condition would better be space == gmfn_foreign.
Ok.
>
>> @@ -658,7 +660,7 @@ static int xenmem_add_to_physmap(struct domain *d,
>>
>> while ( xatp->size > done )
>> {
>> - rc = xenmem_add_to_physmap_one(d, xatp->space, DOMID_INVALID,
>> + rc = xenmem_add_to_physmap_one(d, xatp->space, inv,
>> xatp->idx, xatp->gpfn);
>
> This instance you could actually leave alone (as it's dealing with
> XENMAPSPACE_gmfn_range only).
>
>> --- a/xen/include/public/memory.h
>> +++ b/xen/include/public/memory.h
>> @@ -259,7 +259,7 @@ struct xen_add_to_physmap_batch {
>>
>> /* Number of pages to go through */
>> uint16_t size;
>> - domid_t foreign_domid; /* IFF gmfn_foreign */
>> + domid_t foreign_domid; /* IFF gmfn_foreign. Should be 0 for other spaces. */
>
> I wonder whether we shouldn't fix up the structure here right away,
> instead of deferring that to after 4.7. After all, as above, we don't
> really want a domain ID here generally anymore, so this should
> either become "u16 aux" (or some such) or a union (all of course only
> for new enough __XEN_INTERFACE_VERSION__).
>
> Plus I think we will want this to be IN/OUT, such that if the
> implementation, rather than failing, uses a replacement attribute,
> that could be communicated back. Of course that would matter
> only if we don't go the union route mentioned above.
I will give a look to use an union.
Regards,
--
Julien Grall
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-05-25 14:28 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-25 11:41 [for-4.7 0/2] xen: Julien Grall
2016-05-25 11:41 ` [for-4.7 1/2] xen: XENMEM_add_physmap_batch: Mark 'foreign_id' as reserved for dev_mmio Julien Grall
2016-05-25 13:12 ` Jan Beulich
2016-05-25 14:04 ` Wei Liu
2016-05-25 14:28 ` Julien Grall [this message]
2016-05-25 11:41 ` [for-4.7 2/2] xen/arm: Document the behavior of XENMAPSPACE_dev_mmio Julien Grall
2016-05-25 13:14 ` Jan Beulich
2016-05-25 14:43 ` Julien Grall
2016-05-25 14:53 ` Jan Beulich
2016-05-26 9:18 ` Stefano Stabellini
2016-05-26 9:28 ` Julien Grall
2016-05-25 11:42 ` xen: XENMEM_add_physmap_batch: Mark 'foreign_is' as reserved for dev_mmio (WAS Re: [for-4.7 0/2] xen:) Julien Grall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5745B692.7030003@arm.com \
--to=julien.grall@arm.com \
--cc=Ian.Jackson@eu.citrix.com \
--cc=JBeulich@suse.com \
--cc=andrew.cooper3@citrix.com \
--cc=george.dunlap@citrix.com \
--cc=shannon.zhao@linaro.org \
--cc=sstabellini@kernel.org \
--cc=tim@xen.org \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).