From: David Vrabel <david.vrabel@citrix.com>
To: David Vrabel <david.vrabel@citrix.com>,
Juergen Gross <jgross@suse.com>, Jan Beulich <JBeulich@suse.com>
Cc: Kevin Moraga <kmoragas@riseup.net>,
Boris Ostrovsky <boris.ostrovsky@oracle.com>,
xen-devel@lists.xen.org
Subject: Re: crash on boot with 4.6.1 on fedora 24
Date: Thu, 26 May 2016 11:24:59 +0100 [thread overview]
Message-ID: <5746CEFB.7020403@citrix.com> (raw)
In-Reply-To: <573B3484.1080603@citrix.com>
On 17/05/16 16:11, David Vrabel wrote:
> On 11/05/16 11:16, David Vrabel wrote:
>>
>> Why don't we get the RW bits correct when making the pteval when we
>> already have the pfn, instead trying to fix it up afterwards.
>
> Kevin, can you try this patch.
>
> David
>
> 8<-----------------
> x86/xen: avoid m2p lookup when setting early page table entries
>
> When page tables entries are set using xen_set_pte_init() during early
> boot there is no page fault handler that could handle a fault when
> performing an M2P lookup.
>
> In 64 guest (usually dom0) early_ioremap() would fault in
> xen_set_pte_init() because an M2P lookup faults because the MFN is in
> MMIO space and not mapped in the M2P. This lookup is done to see if
> the PFN in in the range used for the initial page table pages, so that
> the PTE may be set as read-only.
>
> The M2P lookup can be avoided by moving the check (and clear of RW)
> earlier when the PFN is still available.
>
> [ Not entirely happy with this as the 32/64 bit paths diverge even
> more. Is there some way to unify them instead? ]
Boris, Juergen, any opinion on this patch?
David
> --- a/arch/x86/xen/mmu.c
> +++ b/arch/x86/xen/mmu.c
> @@ -1562,7 +1562,7 @@ static pte_t __init mask_rw_pte(pte_t *ptep, pte_t
> pte)
> return pte;
> }
> #else /* CONFIG_X86_64 */
> -static pte_t __init mask_rw_pte(pte_t *ptep, pte_t pte)
> +static pteval_t __init mask_rw_pte(pteval_t pte)
> {
> unsigned long pfn;
>
> @@ -1577,10 +1577,10 @@ static pte_t __init mask_rw_pte(pte_t *ptep,
> pte_t pte)
> * page tables for mapping the p2m list, too, and page tables MUST be
> * mapped read-only.
> */
> - pfn = pte_pfn(pte);
> + pfn = (pte & PTE_PFN_MASK) >> PAGE_SHIFT;
> if (pfn >= xen_start_info->first_p2m_pfn &&
> pfn < xen_start_info->first_p2m_pfn + xen_start_info->nr_p2m_frames)
> - pte = __pte_ma(pte_val_ma(pte) & ~_PAGE_RW);
> + pte &= ~_PAGE_RW;
>
> return pte;
> }
> @@ -1600,13 +1600,26 @@ static pte_t __init mask_rw_pte(pte_t *ptep,
> pte_t pte)
> * so always write the PTE directly and rely on Xen trapping and
> * emulating any updates as necessary.
> */
> +__visible __init pte_t xen_make_pte_init(pteval_t pte)
> +{
> +#ifdef CONFIG_X86_64
> + pte = mask_rw_pte(pte);
> +#endif
> + pte = pte_pfn_to_mfn(pte);
> +
> + if ((pte & PTE_PFN_MASK) >> PAGE_SHIFT == INVALID_P2M_ENTRY)
> + pte = 0;
> +
> + return native_make_pte(pte);
> +}
> +PV_CALLEE_SAVE_REGS_THUNK(xen_make_pte_init);
> +
> static void __init xen_set_pte_init(pte_t *ptep, pte_t pte)
> {
> +#ifdef CONFIG_X86_32
> if (pte_mfn(pte) != INVALID_P2M_ENTRY)
> pte = mask_rw_pte(ptep, pte);
> - else
> - pte = __pte_ma(0);
> -
> +#endif
> native_set_pte(ptep, pte);
> }
>
> @@ -2407,6 +2420,7 @@ static void __init xen_post_allocator_init(void)
> pv_mmu_ops.alloc_pud = xen_alloc_pud;
> pv_mmu_ops.release_pud = xen_release_pud;
> #endif
> + pv_mmu_ops.make_pte = PV_CALLEE_SAVE(xen_make_pte);
>
> #ifdef CONFIG_X86_64
> pv_mmu_ops.write_cr3 = &xen_write_cr3;
> @@ -2455,7 +2469,7 @@ static const struct pv_mmu_ops xen_mmu_ops
> __initconst = {
> .pte_val = PV_CALLEE_SAVE(xen_pte_val),
> .pgd_val = PV_CALLEE_SAVE(xen_pgd_val),
>
> - .make_pte = PV_CALLEE_SAVE(xen_make_pte),
> + .make_pte = PV_CALLEE_SAVE(xen_make_pte_init),
> .make_pgd = PV_CALLEE_SAVE(xen_make_pgd),
>
> #ifdef CONFIG_X86_PAE
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-05-26 10:24 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-08 22:51 crash on boot with 4.6.1 on fedora 24 Kevin Moraga
2016-05-09 7:23 ` Andrew Cooper
2016-05-09 10:05 ` Jan Beulich
2016-05-09 10:08 ` Jan Beulich
2016-05-09 14:52 ` Kevin Moraga
2016-05-09 15:53 ` Jan Beulich
2016-05-09 16:40 ` Kevin Moraga
2016-05-09 17:15 ` Boris Ostrovsky
2016-05-09 17:22 ` Kevin Moraga
2016-05-09 18:40 ` Boris Ostrovsky
2016-05-10 7:23 ` Jan Beulich
2016-05-10 13:39 ` Boris Ostrovsky
2016-05-10 13:57 ` Jan Beulich
2016-05-10 15:19 ` Juergen Gross
2016-05-10 15:35 ` Jan Beulich
[not found] ` <57321BFA02000078000EA3C2@suse.com>
2016-05-10 15:43 ` Juergen Gross
2016-05-10 16:35 ` Boris Ostrovsky
2016-05-11 5:49 ` Juergen Gross
2016-05-11 6:35 ` Jan Beulich
[not found] ` <5732EEBF02000078000EA613@suse.com>
2016-05-11 7:00 ` Juergen Gross
2016-05-11 7:15 ` Jan Beulich
[not found] ` <5732F83D02000078000EA6A2@suse.com>
2016-05-11 9:57 ` Juergen Gross
2016-05-11 10:03 ` Jan Beulich
[not found] ` <57331FA002000078000EA831@suse.com>
2016-05-11 10:10 ` Juergen Gross
2016-05-11 12:09 ` Jan Beulich
2016-05-11 10:16 ` David Vrabel
2016-05-11 12:21 ` Jan Beulich
2016-05-11 12:48 ` David Vrabel
2016-05-11 13:13 ` Jan Beulich
2016-05-11 13:15 ` Juergen Gross
2016-05-17 15:11 ` David Vrabel
2016-05-17 20:58 ` Kevin Moraga
2016-05-26 10:24 ` David Vrabel [this message]
2016-05-26 14:05 ` Boris Ostrovsky
2016-05-26 15:24 ` David Vrabel
2016-06-01 16:12 ` Martin Cerveny
2016-06-01 16:23 ` Martin Cerveny
2016-06-01 19:32 ` Boris Ostrovsky
2016-06-01 21:01 ` Martin Cerveny
2016-06-01 22:37 ` Boris Ostrovsky
2016-06-02 6:04 ` Martin Cerveny
2016-06-02 13:15 ` Martin Cerveny
2016-06-02 9:54 ` David Vrabel
2016-05-10 16:11 ` Kevin Moraga
2016-05-10 20:11 ` Boris Ostrovsky
2016-05-12 4:52 ` Kevin Moraga
-- strict thread matches above, loose matches on Subject: below --
2016-03-28 17:00 Michael Young
2016-03-29 10:07 ` Jan Beulich
2016-03-29 17:50 ` Konrad Rzeszutek Wilk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5746CEFB.7020403@citrix.com \
--to=david.vrabel@citrix.com \
--cc=JBeulich@suse.com \
--cc=boris.ostrovsky@oracle.com \
--cc=jgross@suse.com \
--cc=kmoragas@riseup.net \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).