From: kishore kumar <bodkekumar@gmail.com>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>,
xen-devel@lists.xensource.com, xen-users@lists.xensource.com
Subject: Re: [Xen-devel] Re: pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9
Date: Wed, 17 Mar 2010 17:34:36 -0700 [thread overview]
Message-ID: <9f975f341003171734n6baad14ai11a5292cf8f40806@mail.gmail.com> (raw)
In-Reply-To: <9f975f341003171520t5d609ae6r9908cc4abb22ff5f@mail.gmail.com>
[-- Attachment #1.1: Type: text/plain, Size: 84293 bytes --]
Attached is the newly captured file after compiling the new pvops dom 0
kernel 2.6.32.10 .
Machine still does not boot up.
Can any one let me know please??
On Wed, Mar 17, 2010 at 3:20 PM, kishore kumar <bodkekumar@gmail.com> wrote:
> Here is the output of df -h and cat /etc/fstab of my machine.
>
> Please let me know your thoughts.
>
> [root@localhost kishore]# df -h
>
> Filesystem Size Used Avail Use% Mounted on
>
> /dev/mapper/VolGroup01-LogVol00
>
> 223G 29G 182G 14% /
>
> /dev/sda1 99M 81M 13M 87% /boot
>
> tmpfs 757M 0 757M 0% /dev/shm
>
> [root@localhost kishore]# cat /etc/fstab
>
> /dev/VolGroup01/LogVol00 / ext3 defaults 1 1
>
> LABEL=/boot /boot ext3 defaults 1 2
>
> tmpfs /dev/shm tmpfs defaults 0 0
>
> devpts /dev/pts devpts gid=5,mode=620 0 0
>
> sysfs /sys sysfs defaults 0 0
>
> proc /proc proc defaults 0 0
>
> /dev/VolGroup01/LogVol01 swap swap defaults 0 0
>
> [root@localhost kishore]#
>
>
> On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote:
>
>> On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore kumar wrote:
>> > I am not sure. Can you please let me know how to check this? any
>> command
>> > ??
>>
>> well simple "df -h" will show it. and also "cat /etc/fstab".
>> You can also check it from your grub configuration.. from the working
>> baremetal (non-Xen) entry.
>>
>> -- Pasi
>>
>> >
>> > On Tue, Mar 16, 2010 at 3:29 PM, Pasi Kärkkäinen <[1]pasik@iki.fi>
>> wrote:
>> >
>> > On Tue, Mar 16, 2010 at 03:22:50PM -0700, kishore kumar wrote:
>> > > attached is the log captured in with the word document .
>> > >
>> >
>> > Scanning logical volumes
>> > Reading all physical volumes. This may take a while...
>> > Activating logical volumes
>> > Volume group "VolGroup01" not found
>> > Trying to resume from /dev/VolGroup01/LogVol01
>> > Unable to access resume device (/dev/VolGroup01/LogVol01)
>> > Creating root device.
>> > Mounting root filesystem.
>> > mount: could not find filesystem '/dev/root'
>> > Setting up other filesystems.
>> > Setting up new root fs
>> > setuproot: moving /dev failed: No such file or directory
>> > no fstab.sys, mounting internal defaults
>> > setuproot: error mounting /proc: No such file or directory
>> > setuproot: error mounting /sys: No such file or directory
>> > Switching to new root and running init.
>> > unmounting old /dev
>> > unmounting old /proc
>> > unmounting old /sys
>> > switchroot: mount failed: No such file or directory
>> > init used greatest stack depth: 4088 bytes left
>> > Kernel panic - not syncing: Attempted to kill init!
>> >
>> > So it seems it gets all the way to executing the initrd image,
>> > which then fails to mount the root fs.
>> >
>> > Earlier in the log:
>> > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> > ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA, max UDMA/133
>> > ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>> > ata1.00: configured for UDMA/133
>> > scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ:
>> 0
>> > ANSI: 5
>> > sd 0:0:0:0: Attached scsi generic sg0 type 0
>> > sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232
>> GiB)
>> > sd 0:0:0:0: [sda] Write Protect is off
>> > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
>> doesn't
>> > support DPO or FUA
>> > sda: sda1 sda2
>> > sd 0:0:0:0: [sda] Attached SCSI disk
>> >
>> > so /dev/sda was detected. Is your root lvm volume on /dev/sda ?
>> > Is /dev/VolGroup01/LogVol01 really your root fs?
>> >
>> > -- Pasi
>> >
>> > >
>> > >
>> > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi Kärkkäinen
>> > <[1][2]pasik@iki.fi> wrote:
>> > >
>> > > On Tue, Mar 16, 2010 at 02:56:06PM -0700, kishore kumar
>> wrote:
>> > > > Please find the attached log file after fixing the dom
>> 0
>> > kernel cmd
>> > > line
>> > > > as below
>> > > >
>> > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0
>> > earlyprintk=xen
>> > > nomodeset
>> > > >
>> > >
>> > > There's something wrong with the log, the dom0 kernel parts
>> are
>> > all on
>> > > one line..
>> > > It's really difficult to read it.
>> > >
>> > > -- Pasi
>> > >
>> > > > Thanks
>> > > >
>> > > >
>> > > > On Tue, Mar 16, 2010 at 2:29 PM, Pasi Kärkkäinen
>> > > <[1][2][3]pasik@iki.fi> wrote:
>> > > >
>> > > > On Tue, Mar 16, 2010 at 02:16:22PM -0700, kishore
>> kumar
>> > wrote:
>> > > > > I did below steps.
>> > > > >
>> > > > >
>> > > > > I pulled DOM 0 kernel from
>> > > > > git clone
>> > > >
>> > >
>> > git://[1][2][3][4]
>> git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>> > > > > linux-2.6-xen
>> > > > >
>> > > > > cd linux-2.6-xen
>> > > > >
>> > > > > make clean
>> > > > >
>> > > > > cp -a .config .config-old
>> > > > >
>> > > > > wget -O .config
>> > > > >
>> > > >
>> > >
>> > [2][3][4][5]
>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>> > > > >
>> > > > > make oldconfig
>> > > > >
>> > > > > make bzImage
>> > > > >
>> > > > > make modules
>> > > > >
>> > > > > make modules_install
>> > > > >
>> > > > > cp -a .config /boot/config-2.6.32.9
>> > > > >
>> > > > > cp -a System.map /boot/System.map-2.6.32.9
>> > > > >
>> > > > > cp -a arch/x86/boot/bzImage
>> /boot/vmlinuz-2.6.32.9
>> > > > >
>> > > > > and modified the grub.conf as below
>> > > > >
>> > > > >
>> > > > > Root(hd0,0)
>> > > > >
>> > > > > kernel /xen.gz console=vga,com1 com1=115200,8n1
>> > msi=1
>> > > iommu=1
>> > > > >
>> > > > > module /vmlinuz-2.6.32.9 ro
>> > root=/dev/VolGroup01/LogVo100
>> > > rhgb
>> > > > quiet
>> > > > >
>> > > > > module /initrd-2.6.32.9.img
>> > > > >
>> > > > >
>> > > > > and rebooted the machine. Then It booted with
>> some
>> > xen
>> > > messages
>> > > > and
>> > > > > stopped. Those were the messages captured from
>> > serial
>> > > console.
>> > > > >
>> > > > > Please let me know if I did something wrong
>> here.
>> > > > >
>> > > >
>> > > > Please fix the kernel cmdline based on my earlier
>> email,
>> > and
>> > > capture and
>> > > > post the
>> > > > serial console log again!
>> > > >
>> > > > -- Pasi
>> > > > >
>> > > > >
>> > > > > On Tue, Mar 16, 2010 at 1:20 PM, Pasi Kärkkäinen
>> > > > <[3][4][5][6]pasik@iki.fi> wrote:
>> > > > >
>> > > > > On Tue, Mar 16, 2010 at 01:16:28PM -0700,
>> Jeremy
>> > > Fitzhardinge
>> > > > wrote:
>> > > > > > On 03/16/2010 12:48 PM, Pasi Kärkkäinen
>> wrote:
>> > > > > >> On Tue, Mar 16, 2010 at 09:43:44PM +0200,
>> Pasi
>> > > Kärkkäinen
>> > > > wrote:
>> > > > > >>
>> > > > > >>> On Tue, Mar 16, 2010 at 10:32:17AM -0700,
>> > kishore
>> > > kumar
>> > > > wrote:
>> > > > > >>>
>> > > > > >>>> Attached is the output captured from
>> > serial
>> > > console.
>> > > > > >>>>
>> > > > > >>>> Machine does not boot after compiling
>> xen
>> > 3.4.3
>> > > with
>> > > > pv_ops dom
>> > > > > 0 kernel.
>> > > > > >>>>
>> > > > > >>>> Please let me know what is going
>> wrong
>> > here.
>> > > > > >>>>
>> > > > > >>>>
>> > > > > >>> Ok this looks like a bug that is already
>> being
>> > sorted
>> > > out on
>> > > > > xen-devel mailinglist.
>> > > > > >>> I added CC to xen-devel.
>> > > > > >>>
>> > > > > >>>
>> > > > > >>
>> > > > > >
>> > > > > > Those messages are not a problem in
>> themselves,
>> > but the
>> > > related
>> > > > > problem
>> > > > > > is believed to be fixed in current
>> > xen/stable-2.6.32.x.
>> > > It
>> > > > looks like
>> > > > > > the output stops there because the Xen
>> console
>> > isn't set
>> > > up
>> > > > properly
>> > > > > for
>> > > > > > some reason.
>> > > > > >
>> > > > >
>> > > > > Yeah, remove "rhgb quiet" from the options..
>> the
>> > dom0
>> > > kernel
>> > > > cmdline
>> > > > > should be like this:
>> > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0
>> > > earlyprintk=xen
>> > > > nomodeset
>> > > > > -- Pasi
>> > > > >
>> > > > > References
>> > > > >
>> > > > > Visible links
>> > > > > 1.
>> > >
>> > [5][6][7]
>> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>> > > > > 2.
>> > > >
>> > >
>> > [6][7][8]
>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>> > > > > 3. mailto:[7][8][9]pasik@iki.fi
>> > > >
>> > > > References
>> > > >
>> > > > Visible links
>> > > > 1. mailto:[9][10]pasik@iki.fi
>> > > > 2.
>> > >
>> > [10][11]
>> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>> > > > 3.
>> > >
>> > [11][12]
>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>> > > > 4. mailto:[12][13]pasik@iki.fi
>> > > > 5.
>> > >
>> > [13][14]
>> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>> > > > 6.
>> > >
>> > [14][15]
>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>> > > > 7. mailto:[15][16]pasik@iki.fi
>> > > > Asserting Post complete GPIO!!!
>> > > > Transfer control to CSM 16-bit binary for legacy boot
>> > > > __ __ _____ _ _ _____ _ _
>> > > > \ \/ /___ _ __ |___ /| || | |___ / _ __ ___| || |
>> _
>> > __ _
>> > > __ ___
>> > > > \ // _ \ '_ \ |_ \| || |_ |_ \ __| '__/ __| || |_
>> __|
>> > '_ \|
>> > > '__/ _ \
>> > > > / \ __/ | | | ___) |__ _| ___) |__| | | (__|__
>> _|__|
>> > |_) | |
>> > > | __/
>> > > > /_/\_\___|_| |_| |____(_) |_|(_)____/ |_| \___| |_|
>> |
>> > .__/|_|
>> > > \___|
>> > > >
>> |_|
>> > > > (XEN) Xen version 3.4.3-rc4-pre (kishore@localdomain)
>> (gcc
>> > version
>> > > 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar 15 13:44:31 PDT
>> 2010
>> > > > (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 2010 +0000
>> > > 19924:6e72f8c3c017
>> > > > (XEN) Command line: console=vga,com1 com1=115200,8n1 msi=1
>> > iommu=1
>> > > > (XEN) Video information:
>> > > > (XEN) VGA is text mode 80x25, font 8x16
>> > > > (XEN) VBE/DDC methods: none; EDID transfer time: 0
>> seconds
>> > > > (XEN) EDID info not retrieved because no DDC retrieval
>> method
>> > > detected
>> > > > (XEN) Disc information:
>> > > > (XEN) Found 1 MBR signatures
>> > > > (XEN) Found 1 EDD information structures
>> > > > (XEN) Xen-e820 RAM map:
>> > > > (XEN) 0000000000000000 - 000000000009d000 (usable)
>> > > > (XEN) 000000000009d000 - 00000000000a0000 (reserved)
>> > > > (XEN) 00000000000e0000 - 0000000000100000 (reserved)
>> > > > (XEN) 0000000000100000 - 000000006d597000 (usable)
>> > > > (XEN) 000000006d597000 - 000000006d686000 (reserved)
>> > > > (XEN) 000000006d686000 - 000000006f598000 (usable)
>> > > > (XEN) 000000006f598000 - 000000006f59a000 (reserved)
>> > > > (XEN) 000000006f59a000 - 000000006f5af000 (ACPI NVS)
>> > > > (XEN) 000000006f5af000 - 000000006f5d9000 (reserved)
>> > > > (XEN) 000000006f5d9000 - 000000006f5f9000 (ACPI data)
>> > > > (XEN) 000000006f5f9000 - 000000006f6df000 (ACPI NVS)
>> > > > (XEN) 000000006f6df000 - 000000006f700000 (ACPI data)
>> > > > (XEN) 000000006f700000 - 0000000080000000 (reserved)
>> > > > (XEN) 00000000a0000000 - 00000000b0000000 (reserved)
>> > > > (XEN) 00000000fc000000 - 00000000fd000000 (reserved)
>> > > > (XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
>> > > > (XEN) 00000000ffc00000 - 0000000100000000 (reserved)
>> > > > (XEN) System RAM: 1780MB (1823000kB)
>> > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL )
>> > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL THRLY
>> 0
>> > > 1000013)
>> > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL THRLY
>> 0
>> > MSFT
>> > > 100000D)
>> > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL THRLY
>> 3
>> > MSFT
>> > > 100000D)
>> > > > (XEN) ACPI: FACS 6F5F9000, 0040
>> > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL THRLY
>> 0
>> > MSFT
>> > > 100000D)
>> > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL THRLY
>> 1
>> > MSFT
>> > > 100000D)
>> > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL THRLY
>> 1
>> > MSFT
>> > > 100000D)
>> > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL THRLY
>> 1
>> > MSFT
>> > > 100000D)
>> > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL THRLY
>> 0
>> > MSFT
>> > > 100000D)
>> > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 INTEL SSDT PM
>> 4000
>> > INTL
>> > > 20061109)
>> > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL THRLY
>> 1
>> > MSFT
>> > > 100000D)
>> > > > (XEN) Domain heap initialised
>> > > > (XEN) Processor #0 6:12 APIC version 21
>> > > > (XEN) Processor #2 6:12 APIC version 21
>> > > > (XEN) Processor #4 6:12 APIC version 21
>> > > > (XEN) Processor #16 6:12 APIC version 21
>> > > > (XEN) Processor #18 6:12 APIC version 21
>> > > > (XEN) Processor #20 6:12 APIC version 21
>> > > > (XEN) Processor #1 6:12 APIC version 21
>> > > > (XEN) Processor #3 6:12 APIC version 21
>> > > > (XEN) Processor #5 6:12 APIC version 21
>> > > > (XEN) Processor #17 6:12 APIC version 21
>> > > > (XEN) Processor #19 6:12 APIC version 21
>> > > > (XEN) Processor #21 6:12 APIC version 21
>> > > > (XEN) IOAPIC[0]: apic_id 8, version 32, address
>> 0xfec00000, GSI
>> > 0-23
>> > > > (XEN) IOAPIC[1]: apic_id 9, version 32, address
>> 0xfec90000, GSI
>> > 24-47
>> > > > (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs
>> > > > (XEN) Intel VT-d DMAR tables have been parsed.
>> > > > (XEN) Using scheduler: SMP Credit Scheduler (credit)
>> > > > (XEN) Detected 3200.207 MHz processor.
>> > > > (XEN) VMX: Supported advanced features:
>> > > > (XEN) - APIC MMIO access virtualisation
>> > > > (XEN) - APIC TPR shadow
>> > > > (XEN) - Extended Page Tables (EPT)
>> > > > (XEN) - Virtual-Processor Identifiers (VPID)
>> > > > (XEN) - Virtual NMI
>> > > > (XEN) - MSR direct-access bitmap
>> > > > (XEN) VMX: EPT is available.
>> > > > (XEN) VMX: VPID is available.
>> > > > (XEN) HVM: VMX enabled
>> > > > (XEN) HVM: Hardware Assisted Paging detected.
>> > > > (XEN) CPU0: Intel Genuine Intel(R) CPU 000 @
>> > 3.20GHz
>> > > stepping 00
>> > > > (XEN) Booting processor 1/2 eip 88000
>> > > > (XEN) CPU1: Intel Genuine Intel(R) CPU 000 @
>> > 3.20GHz
>> > > stepping 00
>> > > > (XEN) Booting processor 2/4 eip 88000
>> > > > (XEN) CPU2: Intel Genuine Intel(R) CPU 000 @
>> > 3.20GHz
>> > > stepping 00
>> > > > (XEN) Booting processor 3/16 eip 88000
>> > > > (XEN) CPU3: Intel Genuine Intel(R) CPU 000 @
>> > 3.20GHz
>> > > stepping 00
>> > > > (XEN) Booting processor 4/18 eip 88000
>> > > > (XEN) CPU4: Intel Genuine Intel(R) CPU 000 @
>> > 3.20GHz
>> > > stepping 00
>> > > > (XEN) Booting processor 5/20 eip 88000
>> > > > (XEN) CPU5: Intel Genuine Intel(R) CPU 000 @
>> > 3.20GHz
>> > > stepping 00
>> > > > (XEN) Booting processor 6/1 eip 88000
>> > > > (XEN) CPU6: Intel Genuine Intel(R) CPU 000 @
>> > 3.20GHz
>> > > stepping 00
>> > > > (XEN) Booting processor 7/3 eip 88000
>> > > > (XEN) CPU7: Intel Genuine Intel(R) CPU 000 @
>> > 3.20GHz
>> > > stepping 00
>> > > > (XEN) Booting processor 8/5 eip 88000
>> > > > (XEN) CPU8: Intel Genuine Intel(R) CPU 000 @
>> > 3.20GHz
>> > > stepping 00
>> > > > (XEN) Booting processor 9/17 eip 88000
>> > > > (XEN) CPU9: Intel Genuine Intel(R) CPU 000 @
>> > 3.20GHz
>> > > stepping 00
>> > > > (XEN) Booting processor 10/19 eip 88000
>> > > > (XEN) CPU10: Intel Genuine Intel(R) CPU 000 @
>> > 3.20GHz
>> > > stepping 00
>> > > > (XEN) Booting processor 11/21 eip 88000
>> > > > (XEN) CPU11: Intel Genuine Intel(R) CPU 000 @
>> > 3.20GHz
>> > > stepping 00
>> > > > (XEN) Total of 12 processors activated.
>> > > > (XEN) ENABLING IO-APIC IRQs
>> > > > (XEN) -> Using new ACK method
>> > > > (XEN) checking TSC synchronization across 12 CPUs: passed.
>> > > > (XEN) Platform timer is 14.318MHz HPET
>> > > > ?(XEN) Brought up 12 CPUs
>> > > > (XEN) Intel VT-d Snoop Control supported.
>> > > > (XEN) Intel VT-d DMA Passthrough not supported.
>> > > > (XEN) Intel VT-d Queued Invalidation supported.
>> > > > (XEN) Intel VT-d Interrupt Remapping supported.
>> > > > (XEN) I/O virtualisation enabled
>> > > > (XEN) I/O virtualisation for PV guests disabled
>> > > > (XEN) xenoprof: Initialization failed. Intel processor
>> model 44
>> > for P6
>> > > class family is not supported
>> > > > (XEN) *** LOADING DOMAIN 0 ***
>> > > > (XEN) Xen kernel: 64-bit, lsb, compat32
>> > > > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 ->
>> > 0x26bb000
>> > > > (XEN) PHYSICAL MEMORY ARRANGEMENT:
>> > > > (XEN) Dom0 alloc.: 0000000064000000->0000000068000000
>> > (404490 pages
>> > > to be allocated)
>> > > > (XEN) VIRTUAL MEMORY ARRANGEMENT:
>> > > > (XEN) Loaded kernel: ffffffff81000000->ffffffff826bb000
>> > > > (XEN) Init. ramdisk: ffffffff826bb000->ffffffff82d0d800
>> > > > (XEN) Phys-Mach map: ffffffff82d0e000->ffffffff83044050
>> > > > (XEN) Start info: ffffffff83045000->ffffffff830454b4
>> > > > (XEN) Page tables: ffffffff83046000->ffffffff83063000
>> > > > (XEN) Boot stack: ffffffff83063000->ffffffff83064000
>> > > > (XEN) TOTAL: ffffffff80000000->ffffffff83400000
>> > > > (XEN) ENTRY ADDRESS: ffffffff819c1200
>> > > > (XEN) Dom0 has maximum 12 VCPUs
>> > > > (XEN) Scrubbing Free RAM: .done.
>> > > > (XEN) Xen trace buffers: disabled
>> > > > (XEN) Std. Loglevel: Errors and warnings
>> > > > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and
>> > warnings)
>> > > > (XEN) Xen is relinquishing VGA console.
>> > > > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times
>> to
>> > switch
>> > > input to Xen)
>> > > > (XEN) Freed 128kB init memory.
>> > > > mapping kernel into physical memory
>> > > > Xen: setup ISA identity maps
>> > > > about to get started...
>> > > > Initializing cgroup subsys cpuset
>> > > > Initializing cgroup subsys cpu
>> > > > Linux version 2.6.32.9 (kishore@localhost.localdomain)
>> (gcc
>> > version
>> > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 15
>> 15:16:28 PDT
>> > 2010
>> > > > Command line: ro root=/dev/VolGroup01/LogVol00
>> console=hvc0
>> > > earlyprintk=xen nomodeset
>> > > > KERNEL supported cpus:
>> > > > Intel GenuineIntel
>> > > > AMD AuthenticAMD
>> > > > Centaur CentaurHauls
>> > > > BIOS-provided physical RAM map:
>> > > > Xen: 0000000000000000 - 000000000009d000 (usable)
>> > > > Xen: 000000000009d000 - 0000000000100000 (reserved)
>> > > > Xen: 0000000000100000 - 0000000066c0a000 (usable)
>> > > > Xen: 000000006d597000 - 000000006d686000 (reserved)
>> > > > Xen: 000000006f598000 - 000000006f59a000 (reserved)
>> > > > Xen: 000000006f59a000 - 000000006f5af000 (ACPI NVS)
>> > > > Xen: 000000006f5af000 - 000000006f5d9000 (reserved)
>> > > > Xen: 000000006f5d9000 - 000000006f5f9000 (ACPI data)
>> > > > Xen: 000000006f5f9000 - 000000006f6df000 (ACPI NVS)
>> > > > Xen: 000000006f6df000 - 000000006f700000 (ACPI data)
>> > > > Xen: 000000006f700000 - 0000000080000000 (reserved)
>> > > > Xen: 00000000a0000000 - 00000000b0000000 (reserved)
>> > > > Xen: 00000000fc000000 - 00000000fd000000 (reserved)
>> > > > Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
>> > > > Xen: 00000000ffc00000 - 0000000100000000 (reserved)
>> > > > bootconsole [xenboot0] enabled
>> > > > DMI 2.4 present.
>> > > > last_pfn = 0x66c0a max_arch_pfn = 0x400000000
>> > > > init_memory_mapping: 0000000000000000-0000000066c0a000
>> > > > RAMDISK: 026bb000 - 02d0d800
>> > > > ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL )
>> > > > ACPI: XSDT 000000006f6fe120 00064 (v01 INTEL THRLY
>> 00000000
>> > > 01000013)
>> > > > ACPI: FACP 000000006f6fd000 000F4 (v04 INTEL THRLY
>> 00000000
>> > MSFT
>> > > 0100000D)
>> > > > ACPI: DSDT 000000006f6f5000 074F1 (v02 INTEL THRLY
>> 00000003
>> > MSFT
>> > > 0100000D)
>> > > > ACPI: FACS 000000006f5f9000 00040
>> > > > ACPI: APIC 000000006f6f4000 001CC (v02 INTEL THRLY
>> 00000000
>> > MSFT
>> > > 0100000D)
>> > > > ACPI: MCFG 000000006f6f3000 0003C (v01 INTEL THRLY
>> 00000001
>> > MSFT
>> > > 0100000D)
>> > > > ACPI: HPET 000000006f6f2000 00038 (v01 INTEL THRLY
>> 00000001
>> > MSFT
>> > > 0100000D)
>> > > > ACPI: SLIT 000000006f6f1000 00030 (v01 INTEL THRLY
>> 00000001
>> > MSFT
>> > > 0100000D)
>> > > > ACPI: WDDT 000000006f6f0000 00040 (v01 INTEL THRLY
>> 00000000
>> > MSFT
>> > > 0100000D)
>> > > > ACPI: SSDT 000000006f5d9000 1FDDC (v01 INTEL SSDT PM
>> 00004000
>> > INTL
>> > > 20061109)
>> > > > ACPI: 000000006f6ee000 001D0 (v01 INTEL THRLY
>> 00000001
>> > MSFT
>> > > 0100000D)
>> > > > No NUMA configuration found
>> > > > Faking a node at 0000000000000000-0000000066c0a000
>> > > > Bootmem setup node 0 0000000000000000-0000000066c0a000
>> > > > NODE_DATA [0000000000008000 - 000000000001ffff]
>> > > > bootmap [0000000000020000 - 000000000002cd87] pages d
>> > > > (9 early reservations) ==> bootmem [0000000000 -
>> 0066c0a000]
>> > > > #0 [0000000000 - 0000001000] BIOS data page ==>
>> [0000000000
>> > -
>> > > 0000001000]
>> > > > #1 [0003046000 - 0003063000] XEN PAGETABLES ==>
>> [0003046000
>> > -
>> > > 0003063000]
>> > > > #2 [0000006000 - 0000008000] TRAMPOLINE ==>
>> [0000006000
>> > -
>> > > 0000008000]
>> > > > #3 [0001000000 - 000269ae98] TEXT DATA BSS ==>
>> [0001000000
>> > -
>> > > 000269ae98]
>> > > > #4 [00026bb000 - 0002d0d800] RAMDISK ==>
>> [00026bb000
>> > -
>> > > 0002d0d800]
>> > > > #5 [0002d0e000 - 0003046000] XEN START INFO ==>
>> [0002d0e000
>> > -
>> > > 0003046000]
>> > > > #6 [000269b000 - 000269b011] BRK ==>
>> [000269b000
>> > -
>> > > 000269b011]
>> > > > #7 [0000100000 - 000041a000] PGTABLE ==>
>> [0000100000
>> > -
>> > > 000041a000]
>> > > > #8 [0000001000 - 0000001030] ACPI SLIT ==>
>> [0000001000
>> > -
>> > > 0000001030]
>> > > > found SMP MP-table at [ffff8800000fd750] fd750
>> > > > Zone PFN ranges:
>> > > > DMA 0x00000000 -> 0x00001000
>> > > > DMA32 0x00001000 -> 0x00100000
>> > > > Normal 0x00100000 -> 0x00100000
>> > > > Movable zone start PFN for each node
>> > > > early_node_map[2] active PFN ranges
>> > > > 0: 0x00000000 -> 0x0000009d
>> > > > 0: 0x00000100 -> 0x00066c0a
>> > > > ACPI: PM-Timer IO Port: 0x408
>> > > > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>> > > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
>> > > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
>> > > > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled)
>> > > > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled)
>> > > > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
>> > > > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] enabled)
>> > > > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
>> > > > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] enabled)
>> > > > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)
>> > > > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled)
>> > > > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled)
>> > > > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled)
>> > > > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled)
>> > > > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled)
>> > > > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled)
>> > > > ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled)
>> > > > ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled)
>> > > > ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled)
>> > > > ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled)
>> > > > ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled)
>> > > > ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled)
>> > > > ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled)
>> > > > ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled)
>> > > > ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1])
>> > > > ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1])
>> > > > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>> > > > IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI
>> 0-0
>> > > > ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24])
>> > > > IOAPIC[1]: apic_id 9, version 0, address 0xfec90000, GSI
>> 24-24
>> > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> > > > ERROR: Unable to locate IOAPIC for GSI 2
>> > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
>> level)
>> > > > ERROR: Unable to locate IOAPIC for GSI 9
>> > > > Using ACPI (MADT) for SMP configuration information
>> > > > ACPI: HPET id: 0x8086a401 base: 0xfed00000
>> > > > SMP: Allowing 12 CPUs, 0 hotplug CPUs
>> > > > PM: Registered nosave memory: 000000000009d000 -
>> > 0000000000100000
>> > > > Allocating PCI resources starting at b0000000 (gap:
>> > b0000000:4c000000)
>> > > > Booting paravirtualized kernel on Xen
>> > > > Xen version: 3.4.3-rc4-pre (preserve-AD) (dom0)
>> > > > NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12
>> nr_node_ids:1
>> > > > PERCPU: Embedded 478 pages/cpu @ffff880005ebc000 s1928024
>> r8192
>> > d21672
>> > > u1957888
>> > > > pcpu-alloc: s1928024 r8192 d21672 u1957888 alloc=478*4096
>> > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0]
>> 06
>> > [0] 07
>> > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11
>> > > > Xen: using vcpu_info placement
>> > > > Built 1 zonelists in Node order, mobility grouping on.
>> Total
>> > pages:
>> > > 409291
>> > > > Policy zone: DMA32
>> > > > Kernel command line: ro root=/dev/VolGroup01/LogVol00
>> > console=hvc0
>> > > earlyprintk=xen nomodeset
>> > > > PID hash table entries: 4096 (order: 3, 32768 bytes)
>> > > > Initializing CPU#0
>> > > > DMA: Placing 64MB software IO TLB between ffff880007525000
>> -
>> > > ffff88000b525000
>> > > > DMA: software IO TLB at phys 0x7525000 - 0xb525000
>> > > > xen_swiotlb_fixup: buf=ffff880007525000 size=67108864
>> > > > xen_swiotlb_fixup: buf=ffff88000b585000 size=32768
>> > > > Memory: 1514268k/1683496k available (4654k kernel code,
>> 396k
>> > absent,
>> > > 168832k reserved, 3443k data, 3396k init)
>> > > > SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
>> > CPUs=12,
>> > > Nodes=1
>> > > > Hierarchical RCU implementation.
>> > > > NR_IRQS:4352 nr_irqs:3072
>> > > > Already setup the GSI :0
>> > > > Already setup the GSI :1
>> > > > Already setup the GSI :2
>> > > > Already setup the GSI :3
>> > > > Already setup the GSI :4
>> > > > Already setup the GSI :5
>> > > > Already setup the GSI :6
>> > > > Already setup the GSI :7
>> > > > Already setup the GSI :8
>> > > > Already setup the GSI :9
>> > > > Already setup the GSI :10
>> > > > Already setup the GSI :11
>> > > > Already setup the GSI :12
>> > > > Already setup the GSI :13
>> > > > Already setup the GSI :14
>> > > > Already setup the GSI :15
>> > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
>> level)
>> > > > xen: sci override: source_irq=9 global_irq=9 trigger=c
>> > polarity=1
>> > > > xen_allocate_pirq: returning irq 9 for gsi 9
>> > > > Already setup the GSI :9
>> > > > xen: acpi sci 9
>> > > > Console: colour VGA+ 80x25
>> > > > console [hvc0] enabled, bootconsole disabled console
>> [hvc0]
>> > enabled,
>> > > bootconsole disabled
>> > > > Lock dependency validator: Copyright (c) 2006 Red Hat,
>> Inc.,
>> > Ingo
>> > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH:
>> > 48
>> > > ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE:
>> > 4096 ...
>> > > MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS:
>> 32768
>> > ...
>> > > CHAINHASH_SIZE: 16384 memory used by lock
>> dependency
>> > info:
>> > > 6367 kB per task-struct memory footprint: 2688 bytes
>> allocated
>> > 17039360
>> > > bytes of page_cgroup please try 'cgroup_disable=memory'
>> option if
>> > you
>> > > don't want memory cgroups installing Xen timer for CPU 0
>> Detected
>> > > 3200.206 MHz processor. Calibrating delay loop (skipped),
>> value
>> > > calculated using timer frequency.. 6400.41 BogoMIPS
>> (lpj=3200206)
>> > > Security Framework initialized SELinux: Initializing.
>> Dentry
>> > cache hash
>> > > table entries: 262144 (order: 9, 2097152 bytes) Inode-cache
>> hash
>> > table
>> > > entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash
>> table
>> > > entries: 256 Initializing cgroup subsys ns Initializing
>> cgroup
>> > subsys
>> > > cpuacct Initializing cgroup subsys memory Initializing
>> cgroup
>> > subsys
>> > > devices Initializing cgroup subsys freezer Initializing
>> cgroup
>> > subsys
>> > > net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache:
>> 256K
>> > CPU:
>> > > L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU: Unsupported number
>> of
>> > siblings
>> > > 32 Performance Events: unsupported p6 CPU model 44 no PMU
>> driver,
>> > > software events only. lockdep: fixing up alternatives. SMP
>> > alternatives:
>> > > switching to UP code ACPI: Core revision 20090903 ftrace:
>> > converting
>> > > mcount calls to 0f 1f 44 00 00 ftrace: allocating 27971
>> entries
>> > in 110
>> > > pages installing Xen timer for CPU 1 lockdep: fixing up
>> > alternatives.
>> > > SMP alternatives: switching to SMP code Initializing CPU#1
>> CPU:
>> > L1 I
>> > > cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3
>> cache:
>> > 12288K
>> > > CPU 1/0x0 -> Node 0 CPU: Unsupported number of siblings 32
>> > installing
>> > > Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I cache: 32K,
>> L1 D
>> > cache:
>> > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 2/0x0 ->
>> Node 0
>> > CPU:
>> > > Unsupported number of siblings 32 installing Xen timer for
>> CPU 3
>> > > Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K
>> CPU: L2
>> > cache:
>> > > 256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node 0 CPU:
>> Unsupported
>> > number
>> > > of siblings 32 installing Xen timer for CPU 4 Initializing
>> CPU#4
>> > CPU: L1
>> > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3
>> cache:
>> > 12288K
>> > > CPU 4/0x0 -> Node 0 CPU: Unsupported number of siblings 32
>> > installing
>> > > Xen timer for CPU 5 Initializing CPU#5 CPU: L1 I cache: 32K,
>> L1 D
>> > cache:
>> > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 5/0x0 ->
>> Node 0
>> > CPU:
>> > > Unsupported number of siblings 32 installing Xen timer for
>> CPU 6
>> > > Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K
>> CPU: L2
>> > cache:
>> > > 256K CPU: L3 cache: 12288K CPU 6/0x0 -> Node 0 CPU:
>> Unsupported
>> > number
>> > > of siblings 32 installing Xen timer for CPU 7 Initializing
>> CPU#7
>> > CPU: L1
>> > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3
>> cache:
>> > 12288K
>> > > CPU 7/0x0 -> Node 0 CPU: Unsupported number of siblings 32
>> > installing
>> > > Xen timer for CPU 8 Initializing CPU#8 CPU: L1 I cache: 32K,
>> L1 D
>> > cache:
>> > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 8/0x0 ->
>> Node 0
>> > CPU:
>> > > Unsupported number of siblings 32 installing Xen timer for
>> CPU 9
>> > > Initializing CPU#9 CPU: L1 I cache: 32K, L1 D cache: 32K
>> CPU: L2
>> > cache:
>> > > 256K CPU: L3 cache: 12288K CPU 9/0x0 -> Node 0 CPU:
>> Unsupported
>> > number
>> > > of siblings 32 installing Xen timer for CPU 10 Initializing
>> > CPU#10 CPU:
>> > > L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3
>> > cache:
>> > > 12288K CPU 10/0x0 -> Node 0 CPU: Unsupported number of
>> siblings
>> > 32
>> > > installing Xen timer for CPU 11 Initializing CPU#11 CPU: L1
>> I
>> > cache:
>> > > 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache:
>> 12288K
>> > CPU
>> > > 11/0x0 -> Node 0 CPU: Unsupported number of siblings 32
>> Brought
>> > up 12
>> > > CPUs Grant table initialized regulator: core version 0.5
>> Time:
>> > 14:45:00
>> > > Date: 03/16/10 NET: Registered protocol family 16
>> > xenbus_probe_init ok
>> > > ACPI FADT declares the system doesn't support PCIe ASPM, so
>> > disable it
>> > > ACPI: bus type pci registered PCI: MCFG configuration 0:
>> base
>> > a0000000
>> > > segment 0 buses 0 - 255 PCI: MCFG area at a0000000 reserved
>> in
>> > E820 PCI:
>> > > Using MMCONFIG at a0000000 - afffffff PCI: Using
>> configuration
>> > type 1
>> > > for base access bio: create slab <bio-0> at 0 ACPI Error:
>> Field
>> > [CPB3]
>> > > at 96 exceeds Buffer [NULL] size 64 (bits)
>> > (20090903/dsopcode-596) ACPI
>> > > Error (psparse-0537): Method parse/execution failed
>> [\_SB_._OSC]
>> > (Node
>> > > ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI: Interpreter
>> enabled
>> > ACPI:
>> > > (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt
>> > routing ACPI
>> > > Warning: Incorrect checksum in table [ ] - 97, should be
>> DB
>> > > (20090903/tbutils-314) ACPI: No dock devices found. ACPI:
>> PCI
>> > Root
>> > > Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported
>> from D0
>> > D3hot
>> > > D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0:
>> PME#
>> > supported
>> > > from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci
>> > 0000:00:03.0:
>> > > PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME#
>> > disabled pci
>> > > 0000:00:04.0: PME# supported from D0 D3hot D3cold pci
>> > 0000:00:04.0: PME#
>> > > disabled pci 0000:00:05.0: PME# supported from D0 D3hot
>> D3cold
>> > pci
>> > > 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported
>> from
>> > D0
>> > > D3hot D3cold pci 0000:00:06.0: PME# disabled pci
>> 0000:00:07.0:
>> > PME#
>> > > supported from D0 D3hot D3cold pci 0000:00:07.0: PME#
>> disabled
>> > pci
>> > > 0000:00:08.0: PME# supported from D0 D3hot D3cold pci
>> > 0000:00:08.0: PME#
>> > > disabled pci 0000:00:09.0: PME# supported from D0 D3hot
>> D3cold
>> > pci
>> > > 0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME# supported
>> from
>> > D0
>> > > D3hot D3cold pci 0000:00:0a.0: PME# disabled pci
>> 0000:00:13.0:
>> > PME#
>> > > supported from D0 D3hot D3cold pci 0000:00:13.0: PME#
>> disabled
>> > pci
>> > > 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci
>> > 0000:00:1a.7: PME#
>> > > disabled pci 0000:00:1c.0: PME# supported from D0 D3hot
>> D3cold
>> > pci
>> > > 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported
>> from
>> > D0
>> > > D3hot D3cold pci 0000:00:1c.4: PME# disabled pci
>> 0000:00:1c.5:
>> > PME#
>> > > supported from D0 D3hot D3cold pci 0000:00:1c.5: PME#
>> disabled
>> > pci
>> > > 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci
>> > 0000:00:1d.7: PME#
>> > > disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed
>> by
>> > ICH6
>> > > ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f
>> claimed
>> > by ICH6
>> > > GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at
>> 0680
>> > (mask
>> > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at
>> 0ca0
>> > (mask
>> > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at
>> 0600
>> > (mask
>> > > 001f) pci 0000:00:1f.2: PME# supported from D3hot pci
>> > 0000:00:1f.2: PME#
>> > > disabled pci 0000:01:00.0: PME# supported from D0 D3hot
>> D3cold
>> > pci
>> > > 0000:01:00.0: PME# disabled pci 0000:01:00.1: PME# supported
>> from
>> > D0
>> > > D3hot D3cold pci 0000:01:00.1: PME# disabled pci
>> 0000:0c:00.0:
>> > disabling
>> > > ASPM on pre-1.1 PCIe device. You can enable it with
>> > 'pcie_aspm=force'
>> > > pci 0000:00:1e.0: transparent bridge ACPI: PCI Root Bridge
>> [PCI1]
>> > > (0000:fe) ACPI: PCI Root Bridge [PCI2] (0000:ff) ACPI: PCI
>> > Interrupt
>> > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI
>> > Interrupt Link
>> > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI
>> Interrupt
>> > Link
>> > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI
>> Interrupt
>> > Link
>> > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI
>> Interrupt
>> > Link
>> > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI:
>> PCI
>> > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>> ACPI:
>> > PCI
>> > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>> > disabled.
>> > > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12
>> 14
>> > 15)
>> > > xenbus_probe_backend_init bus registered ok
>> > xenbus_probe_frontend_init
>> > > bus registered ok xen_balloon: Initialising balloon driver
>> with
>> > page
>> > > order 0. vgaarb: device added:
>> > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none
>> vgaarb:
>> > loaded
>> > > SCSI subsystem initialized usbcore: registered new interface
>> > driver
>> > > usbfs usbcore: registered new interface driver hub usbcore:
>> > registered
>> > > new device driver usb PCI: Using ACPI for IRQ routing
>> NetLabel:
>> > > Initializing NetLabel: domain hash size = 128 NetLabel:
>> > protocols =
>> > > UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by
>> default
>> > > Switching to clocksource xen kstop/0 used greatest stack
>> depth:
>> > 6568
>> > > bytes left kstop/1 used greatest stack depth: 6536 bytes
>> left
>> > pnp: PnP
>> > > ACPI init ACPI: bus type pnp registered xen_allocate_pirq:
>> > returning irq
>> > > 8 for gsi 8 Already setup the GSI :8 xen_allocate_pirq:
>> returning
>> > irq 13
>> > > for gsi 13 Already setup the GSI :13 pnp: PnP ACPI: found 13
>> > devices
>> > > ACPI: ACPI bus type pnp unregistered system 00:07: ioport
>> range
>> > > 0x500-0x53f has been reserved system 00:07: ioport range
>> > 0x400-0x47f has
>> > > been reserved system 00:07: ioport range 0x800-0x81f has
>> been
>> > reserved
>> > > system 00:07: ioport range 0x2f8-0x2ff has been reserved
>> system
>> > 00:07:
>> > > iomem range 0xfed1c000-0xfed8bffe could not be reserved
>> system
>> > 00:07:
>> > > iomem range 0xff000000-0xffffffff could not be reserved
>> system
>> > 00:07:
>> > > iomem range 0xfee00000-0xfeefffff has been reserved system
>> 00:07:
>> > iomem
>> > > range 0xfe900000-0xfe90001f has been reserved system 00:07:
>> iomem
>> > range
>> > > 0xfea00000-0xfea0001f has been reserved system 00:07: iomem
>> range
>> > > 0xfed1b000-0xfed1bfff has been reserved pci 0000:0c:00.0:
>> BAR 6:
>> > no
>> > > parent found for of device [0xffff0000-0xffffffff] pci
>> > 0000:00:01.0: PCI
>> > > bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window:
>> > > 0x1000-0x1fff pci 0000:00:01.0: MEM window:
>> > 0xb1900000-0xb19fffff pci
>> > > 0000:00:01.0: PREFETCH window: disabled pci 0000:00:02.0:
>> PCI
>> > bridge,
>> > > secondary bus 0000:02 pci 0000:00:02.0: IO window:
>> disabled pci
>> > > 0000:00:02.0: MEM window: disabled pci 0000:00:02.0:
>> PREFETCH
>> > > window: disabled pci 0000:00:03.0: PCI bridge, secondary bus
>> > 0000:03 pci
>> > > 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM
>> > window:
>> > > disabled pci 0000:00:03.0: PREFETCH window: disabled pci
>> > 0000:00:04.0:
>> > > PCI bridge, secondary bus 0000:04 pci 0000:00:04.0: IO
>> window:
>> > > disabled pci 0000:00:04.0: MEM window: disabled pci
>> > 0000:00:04.0:
>> > > PREFETCH window: disabled pci 0000:00:05.0: PCI bridge,
>> secondary
>> > bus
>> > > 0000:05 pci 0000:00:05.0: IO window: disabled pci
>> 0000:00:05.0:
>> > MEM
>> > > window: disabled pci 0000:00:05.0: PREFETCH window:
>> disabled
>> > pci
>> > > 0000:00:06.0: PCI bridge, secondary bus 0000:06 pci
>> 0000:00:06.0:
>> > IO
>> > > window: disabled pci 0000:00:06.0: MEM window: disabled
>> pci
>> > > 0000:00:06.0: PREFETCH window: disabled pci 0000:00:07.0:
>> PCI
>> > bridge,
>> > > secondary bus 0000:07 pci 0000:00:07.0: IO window:
>> disabled pci
>> > > 0000:00:07.0: MEM window: disabled pci 0000:00:07.0:
>> PREFETCH
>> > > window: disabled pci 0000:00:08.0: PCI bridge, secondary bus
>> > 0000:08 pci
>> > > 0000:00:08.0: IO window: disabled pci 0000:00:08.0: MEM
>> > window:
>> > > disabled pci 0000:00:08.0: PREFETCH window: disabled pci
>> > 0000:00:09.0:
>> > > PCI bridge, secondary bus 0000:09 pci 0000:00:09.0: IO
>> window:
>> > > 0x3000-0x3fff pci 0000:00:09.0: MEM window:
>> > 0xb1b00000-0xb1cfffff pci
>> > > 0000:00:09.0: PREFETCH window:
>> > 0x000000b1d00000-0x000000b1efffff pci
>> > > 0000:00:0a.0: PCI bridge, secondary bus 0000:0a pci
>> 0000:00:0a.0:
>> > IO
>> > > window: disabled pci 0000:00:0a.0: MEM window: disabled
>> pci
>> > > 0000:00:0a.0: PREFETCH window: disabled pci 0000:00:1c.0:
>> PCI
>> > bridge,
>> > > secondary bus 0000:0b pci 0000:00:1c.0: IO window:
>> disabled pci
>> > > 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0:
>> PREFETCH
>> > > window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus
>> > 0000:0c pci
>> > > 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM
>> > window:
>> > > 0xb1000000-0xb18fffff pci 0000:00:1c.4: PREFETCH window:
>> > > 0x000000b0000000-0x000000b0ffffff pci 0000:00:1c.5: PCI
>> bridge,
>> > > secondary bus 0000:0d pci 0000:00:1c.5: IO window:
>> disabled pci
>> > > 0000:00:1c.5: MEM window: disabled pci 0000:00:1c.5:
>> PREFETCH
>> > > window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus
>> > 0000:0e pci
>> > > 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM
>> > window:
>> > > disabled pci 0000:00:1e.0: PREFETCH window: disabled pci
>> > 0000:00:01.0:
>> > > PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci 0000:00:02.0:
>> PCI
>> > INT A
>> > > -> GSI 29 (level, low) -> IRQ 29 pci 0000:00:03.0: PCI INT A
>> ->
>> > GSI 24
>> > > (level, low) -> IRQ 24 pci 0000:00:04.0: PCI INT A -> GSI 25
>> > (level,
>> > > low) -> IRQ 25 pci 0000:00:05.0: PCI INT A -> GSI 26 (level,
>> low)
>> > -> IRQ
>> > > 26 pci 0000:00:06.0: PCI INT A -> GSI 27 (level, low) -> IRQ
>> 27
>> > pci
>> > > 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 pci
>> > > 0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 pci
>> > > 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci
>> > > 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 pci
>> > > 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>> > > xen_allocate_pirq: returning irq 16 for gsi 16 Already setup
>> the
>> > GSI :16
>> > > pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>> pci
>> > > 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>> NET:
>> > Registered
>> > > protocol family 2 IP route cache hash table entries: 65536
>> > (order: 7,
>> > > 524288 bytes) TCP established hash table entries: 262144
>> (order:
>> > 10,
>> > > 4194304 bytes) TCP bind hash table entries: 65536 (order:
>> 10,
>> > 4718592
>> > > bytes) TCP: Hash tables configured (established 262144 bind
>> > 65536) TCP
>> > > reno registered NET: Registered protocol family 1 pci
>> > 0000:01:00.0:
>> > > Disabling L0s pci 0000:01:00.1: Disabling L0s Trying to
>> unpack
>> > rootfs
>> > > image as initramfs... Freeing initrd memory: 6474k freed
>> DMA-API:
>> > > preallocated 32768 debug entries DMA-API: debugging enabled
>> by
>> > kernel
>> > > config PCI-DMA: Using software bounce buffering for IO
>> (SWIOTLB)
>> > DMA:
>> > > Placing 64MB software IO TLB between ffff880007525000 -
>> > ffff88000b525000
>> > > DMA: software IO TLB at phys 0x7525000 - 0xb525000 audit:
>> > initializing
>> > > netlink socket (disabled) type=2000 audit(1268750702.035:1):
>> > initialized
>> > > HugeTLB registered 2 MB page size, pre-allocated 0 pages
>> VFS:
>> > Disk
>> > > quotas dquot_6.5.2 Dquot-cache hash table entries: 512
>> (order 0,
>> > 4096
>> > > bytes) msgmni has been set to 2970 cryptomgr_test used
>> greatest
>> > stack
>> > > depth: 5864 bytes left cryptomgr_test used greatest stack
>> depth:
>> > 5816
>> > > bytes left alg: No test for stdrng (krng) Block layer SCSI
>> > generic (bsg)
>> > > driver version 0.4 loaded (major 252) io scheduler noop
>> > registered io
>> > > scheduler anticipatory registered io scheduler deadline
>> > registered io
>> > > scheduler cfq registered (default) pci_hotplug: PCI Hot Plug
>> PCI
>> > Core
>> > > version: 0.5 pciehp 0000:00:09.0:pcie04: HPC vendor_id 8086
>> > device_id
>> > > 3410 ss_vid 0 ss_did 0 pciehp: PCI Express Hot Plug
>> Controller
>> > Driver
>> > > version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver
>> > version: 0.5
>> > > acpiphp_glue: Slot 2 already registered by another hotplug
>> driver
>> > > acpiphp_glue: Slot 2 already registered by another hotplug
>> driver
>> > > acpiphp_glue: Slot 2 already registered by another hotplug
>> driver
>> > > acpiphp_glue: Slot 2 already registered by another hotplug
>> driver
>> > > acpiphp_glue: Slot 2 already registered by another hotplug
>> driver
>> > > acpiphp_glue: Slot 2 already registered by another hotplug
>> driver
>> > > acpiphp_glue: Slot 2 already registered by another hotplug
>> driver
>> > > acpiphp_glue: Slot 2 already registered by another hotplug
>> driver
>> > > pci-stub: invalid id string "" input: Sleep Button as
>> > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
>> ACPI:
>> > Sleep
>> > > Button [SLPB] input: Power Button as
>> > > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power
>> Button
>> > [PWRF]
>> > > registering netback hpet_acpi_add: no address or irqs in
>> _CRS
>> > > Non-volatile memory driver v1.3 Linux agpgart interface
>> v0.103
>> > Serial:
>> > > 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250:
>> ttyS1
>> > at I/O
>> > > 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module
>> > loaded
>> > > input: Macintosh mouse button emulation as
>> > /devices/virtual/input/input2
>> > > ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ
>> 19
>> > ahci
>> > > 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f
>> impl
>> > SATA mode
>> > > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum
>> part
>> > ccc
>> > > ems scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci
>> scsi4 :
>> > ahci
>> > > scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040,
>> > connection
>> > > status changed irq 2996 ata2: SATA max UDMA/133 abar
>> > m2048@0xb1a00000
>> > > port 0xb1a00180 irq 2996 ata3: SATA max UDMA/133 abar
>> > m2048@0xb1a00000
>> > > port 0xb1a00200 irq 2996 ata4: SATA max UDMA/133 abar
>> > m2048@0xb1a00000
>> > > port 0xb1a00280 irq 2996 ata5: SATA max UDMA/133 abar
>> > m2048@0xb1a00000
>> > > port 0xb1a00300 irq 2996 ata6: SATA max UDMA/133 abar
>> > m2048@0xb1a00000
>> > > port 0xb1a00380 irq 2996 Fixed MDIO Bus: probed ehci_hcd:
>> USB 2.0
>> > > 'Enhanced' Host Controller (EHCI) Driver ehci_hcd
>> 0000:00:1a.7:
>> > PCI INT
>> > > C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7:
>> EHCI
>> > Host
>> > > Controller ehci_hcd 0000:00:1a.7: new USB bus registered,
>> > assigned bus
>> > > number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd
>> > 0000:00:1a.7: irq
>> > > 18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7: USB 2.0
>> started,
>> > EHCI 1.00
>> > > usb usb1: New USB device found, idVendor=1d6b,
>> idProduct=0002 usb
>> > usb1:
>> > > New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb
>> > usb1:
>> > > Product: EHCI Host Controller usb usb1: Manufacturer: Linux
>> > 2.6.32.9
>> > > ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1:
>> > configuration #1
>> > > chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0:
>> 6
>> > ports
>> > > detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level,
>> low)
>> > -> IRQ
>> > > 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd
>> > 0000:00:1d.7:
>> > > new USB bus registered, assigned bus number 2 ehci_hcd
>> > 0000:00:1d.7:
>> > > debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem
>> 0xb1a01000
>> > ehci_hcd
>> > > 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB
>> device
>> > found,
>> > > idVendor=1d6b, idProduct=0002 usb usb2: New USB device
>> strings:
>> > Mfr=3,
>> > > Product=2, SerialNumber=1 usb usb2: Product: EHCI Host
>> Controller
>> > usb
>> > > usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd usb usb2:
>> > SerialNumber:
>> > > 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice
>> hub
>> > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected
>> ohci_hcd:
>> > USB 1.1
>> > > 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal
>> Host
>> > > Controller Interface driver xen_allocate_pirq: returning irq
>> 16
>> > for gsi
>> > > 16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0: PCI INT
>> A ->
>> > GSI 16
>> > > (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: UHCI Host
>> > Controller
>> > > uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
>> > number 3
>> > > uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020e0 usb usb3:
>> New
>> > USB
>> > > device found, idVendor=1d6b, idProduct=0001 usb usb3: New
>> USB
>> > device
>> > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product:
>> UHCI
>> > Host
>> > > Controller usb usb3: Manufacturer: Linux 2.6.32.9 uhci_hcd
>> usb
>> > usb3:
>> > > SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen
>> from
>> > 1
>> > > choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports
>> detected
>> > uhci_hcd
>> > > 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>> uhci_hcd
>> > > 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1:
>> new USB
>> > bus
>> > > registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq
>> 21,
>> > io base
>> > > 0x000020c0 usb usb4: New USB device found, idVendor=1d6b,
>> > idProduct=0001
>> > > usb usb4: New USB device strings: Mfr=3, Product=2,
>> > SerialNumber=1 usb
>> > > usb4: Product: UHCI Host Controller usb usb4: Manufacturer:
>> Linux
>> > > 2.6.32.9 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb
>> usb4:
>> > > configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub
>> found
>> > hub
>> > > 4-0:1.0: 2 ports detected xen_allocate_pirq: returning irq
>> 19 for
>> > gsi 19
>> > > Already setup the GSI :19 uhci_hcd 0000:00:1a.2: PCI INT D
>> -> GSI
>> > 19
>> > > (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: UHCI Host
>> > Controller
>> > > uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
>> > number 5
>> > > uhci_hcd 0000:00:1a.2: irq 19, io base 0x000020a0 usb usb5:
>> New
>> > USB
>> > > device found, idVendor=1d6b, idProduct=0001 usb usb5: New
>> USB
>> > device
>> > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product:
>> UHCI
>> > Host
>> > > Controller usb usb5: Manufacturer: Linux 2.6.32.9 uhci_hcd
>> usb
>> > usb5:
>> > > SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen
>> from
>> > 1
>> > > choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports
>> detected
>> > > xen_allocate_pirq: returning irq 23 for gsi 23 Already setup
>> the
>> > GSI :23
>> > > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) ->
>> IRQ 23
>> > > uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd
>> > 0000:00:1d.0: new
>> > > USB bus registered, assigned bus number 6 uhci_hcd
>> 0000:00:1d.0:
>> > irq 23,
>> > > io base 0x00002080 usb usb6: New USB device found,
>> idVendor=1d6b,
>> > > idProduct=0001 usb usb6: New USB device strings: Mfr=3,
>> > Product=2,
>> > > SerialNumber=1 usb usb6: Product: UHCI Host Controller usb
>> usb6:
>> > > Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb6:
>> SerialNumber:
>> > > 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice
>> hub
>> > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected
>> > xen_allocate_pirq:
>> > > returning irq 19 for gsi 19 Already setup the GSI :19
>> uhci_hcd
>> > > 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>> uhci_hcd
>> > > 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1:
>> new USB
>> > bus
>> > > registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq
>> 19,
>> > io base
>> > > 0x00002060 usb usb7: New USB device found, idVendor=1d6b,
>> > idProduct=0001
>> > > usb usb7: New USB device strings: Mfr=3, Product=2,
>> > SerialNumber=1 usb
>> > > usb7: Product: UHCI Host Controller usb usb7: Manufacturer:
>> Linux
>> > > 2.6.32.9 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb
>> usb7:
>> > > configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub
>> found
>> > hub
>> > > 7-0:1.0: 2 ports detected xen_allocate_pirq: returning irq
>> 18 for
>> > gsi 18
>> > > Already setup the GSI :18 uhci_hcd 0000:00:1d.2: PCI INT C
>> -> GSI
>> > 18
>> > > (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI Host
>> > Controller
>> > > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
>> > number 8
>> > > uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb usb8:
>> New
>> > USB
>> > > device found, idVendor=1d6b, idProduct=0001 usb usb8: New
>> USB
>> > device
>> > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product:
>> UHCI
>> > Host
>> > > Controller usb usb8: Manufacturer: Linux 2.6.32.9 uhci_hcd
>> usb
>> > usb8:
>> > > SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen
>> from
>> > 1
>> > > choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports
>> detected
>> > PNP: No
>> > > PS/2 controller found. Probing ports directly. i8042.c: No
>> > controller
>> > > found. mice: PS/2 mouse device common for all mice rtc_cmos
>> > 00:03: RTC
>> > > can wake from S4 rtc_cmos 00:03: rtc core: registered
>> rtc_cmos as
>> > rtc0
>> > > rtc0: alarms up to one month, y3k, 114 bytes nvram
>> device-mapper:
>> > > uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl
>> > (2009-04-01)
>> > > initialised: [16][17]dm-devel@redhat.com cpuidle: using
>> governor
>> > ladder
>> > > cpuidle: using governor menu usbcore: registered new
>> interface
>> > driver
>> > > hiddev usbcore: registered new interface driver usbhid
>> usbhid:
>> > v2.6:USB
>> > > HID core driver nf_conntrack version 0.5.0 (16384 buckets,
>> 65536
>> > max)
>> > > CONFIG_NF_CT_ACCT is deprecated and will be removed soon.
>> Please
>> > use
>> > > nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack
>> module
>> > option
>> > > or sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>> > ip_tables: (C)
>> > > 2000-2006 Netfilter Core Team TCP cubic registered
>> Initializing
>> > XFRM
>> > > netlink socket NET: Registered protocol family 17 registered
>> > taskstats
>> > > version 1 No TPM chip found, activating TPM-bypass! Magic
>> > number:
>> > > 2:902:788 pci 0000:00:16.6: hash matches rtc_cmos 00:03:
>> setting
>> > system
>> > > clock to 2010-03-16 14:45:05 UTC (1268750705) Initalizing
>> network
>> > drop
>> > > monitor service ata2: SATA link down (SStatus 0 SControl
>> 300)
>> > ata4: SATA
>> > > link down (SStatus 0 SControl 300) ata6: SATA link down
>> (SStatus
>> > 0
>> > > SControl 300) ata5: SATA link down (SStatus 0 SControl 300)
>> ata3:
>> > SATA
>> > > link down (SStatus 0 SControl 300) usb 7-1: new low speed
>> USB
>> > device
>> > > using uhci_hcd and address 2
>> > > ====================================================== [
>> INFO:
>> > > SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]
>> 2.6.32.9 #1
>> > > ------------------------------------------------------
>> khubd/100
>> > > [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
>> > (&retval->lock){......},
>> > > at: [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 and this
>> task
>> > is
>> > > already holding: (&uhci->lock){..-...}, at:
>> [<ffffffff8137aedd>]
>> > > uhci_urb_enqueue+0x46/0x7e3 which would create a new lock
>> > dependency:
>> > > (&uhci->lock){..-...} -> (&retval->lock){......} but this
>> new
>> > > dependency connects a SOFTIRQ-irq-safe lock:
>> > (&uhci->lock){..-...} ...
>> > > which became SOFTIRQ-irq-safe at: [<ffffffff8108ea6d>]
>> > > __lock_acquire+0x2d2/0xc07 [<ffffffff8108f46f>]
>> > lock_acquire+0xcd/0xf2
>> > > [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86
>> > > [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c
>> > > [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a
>> > > [<ffffffff8135a479>] rh_timer_func+0xe/0x10
>> > [<ffffffff810693bd>]
>> > > run_timer_softirq+0x1a6/0x257 [<ffffffff810627e4>]
>> > > __do_softirq+0xe6/0x1bc [<ffffffff81013fac>]
>> > call_softirq+0x1c/0x30
>> > > [<ffffffff81015794>] do_softirq+0x4b/0xa7
>> [<ffffffff81062229>]
>> > > irq_exit+0x4a/0x89 [<ffffffff812bf9d9>]
>> > > xen_evtchn_do_upcall+0x156/0x172 [<ffffffff81013ffe>]
>> > > xen_do_hypervisor_callback+0x1e/0x30 to a
>> SOFTIRQ-irq-unsafe
>> > lock:
>> > > (purge_lock){+.+...} ... which became SOFTIRQ-irq-unsafe
>> at: ...
>> > > [<ffffffff8108eadc>] __lock_acquire+0x341/0xc07
>> > [<ffffffff8108f46f>]
>> > > lock_acquire+0xcd/0xf2 [<ffffffff814853bc>]
>> > _spin_lock+0x36/0x6b
>> > > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a
>> > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176
>> > [<ffffffff8100e58c>]
>> > > xen_alloc_ptpage+0x51/0x82 [<ffffffff8100e5d0>]
>> > > xen_alloc_pud+0x13/0x15 [<ffffffff810fe3cf>]
>> > __pud_alloc+0x79/0xb3
>> > > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264
>> > > [<ffffffff8110c161>] vmap_page_range+0xe/0x10
>> > [<ffffffff8110c197>]
>> > > map_vm_area+0x34/0x47 [<ffffffff8110c2cf>]
>> > > __vmalloc_area_node+0x125/0x14d [<ffffffff8110c379>]
>> > > __vmalloc_node+0x82/0x91 [<ffffffff8110c4e9>]
>> > __vmalloc+0x20/0x22
>> > > [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe
>> > > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d
>> > [<ffffffff819c1d99>]
>> > > start_kernel+0x3de/0x426 [<ffffffff819c12c3>]
>> > > x86_64_start_reservations+0xae/0xb2 [<ffffffff819c4d5d>]
>> > > xen_start_kernel+0x4b9/0x4c0 other info that might help us
>> debug
>> > this:
>> > > 2 locks held by khubd/100: #0:
>> (usb_address0_mutex){+.+...},
>> > at:
>> > > [<ffffffff81354f5f>] hub_port_init+0x81/0x7e4 #1:
>> > > (&uhci->lock){..-...}, at: [<ffffffff8137aedd>]
>> > > uhci_urb_enqueue+0x46/0x7e3 the dependencies between
>> > SOFTIRQ-irq-safe
>> > > lock and the holding lock: -> (&uhci->lock){..-...} ops: 0 {
>> > > IN-SOFTIRQ-W at:
>> [<ffffffff8108ea6d>]
>> > > __lock_acquire+0x2d2/0xc07
>> > [<ffffffff8108f46f>]
>> > > lock_acquire+0xcd/0xf2
>> > [<ffffffff81485526>]
>> > > _spin_lock_irqsave+0x4f/0x86
>> > > [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c
>> > > [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a
>> > > [<ffffffff8135a479>] rh_timer_func+0xe/0x10
>> > > [<ffffffff810693bd>] run_timer_softirq+0x1a6/0x257
>> > > [<ffffffff810627e4>] __do_softirq+0xe6/0x1bc
>> > > [<ffffffff81013fac>] call_softirq+0x1c/0x30
>> > > [<ffffffff81015794>] do_softirq+0x4b/0xa7
>> > > [<ffffffff81062229>] irq_exit+0x4a/0x89
>> > > [<ffffffff812bf9d9>] xen_evtchn_do_upcall+0x156/0x172
>> > > [<ffffffff81013ffe>]
>> xen_do_hypervisor_callback+0x1e/0x30
>> > > INITIAL USE at: [<ffffffff8108eb29>]
>> > > __lock_acquire+0x38e/0xc07
>> > [<ffffffff8108f46f>]
>> > > lock_acquire+0xcd/0xf2
>> > [<ffffffff81485526>]
>> > > _spin_lock_irqsave+0x4f/0x86
>> > [<ffffffff8137c3d7>]
>> > > uhci_hub_control+0x74/0x401
>> > [<ffffffff8135bdac>]
>> > > usb_hcd_submit_urb+0x7a6/0xa1e
>> > > [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1
>> > > [<ffffffff8135d51f>] usb_start_wait_urb+0x54/0x1b1
>> > > [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113
>> > > [<ffffffff81358922>] hub_probe+0x37c/0xfaa
>> > > [<ffffffff81360a35>] usb_probe_interface+0x15a/0x1f7
>> > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218
>> > > [<ffffffff813077fa>] __device_attach+0x28/0x31
>> > > [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85
>> > > [<ffffffff81307891>] device_attach+0x65/0x7c
>> > > [<ffffffff8130667e>] bus_probe_device+0x27/0x3e
>> > > [<ffffffff813045b3>] device_add+0x3ab/0x57d
>> > > [<ffffffff8135e3ca>] usb_set_configuration+0x5b9/0x677
>> > > [<ffffffff81367b85>] generic_probe+0x67/0xae
>> > > [<ffffffff813607b1>] usb_probe_device+0x7f/0x87
>> > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218
>> > > [<ffffffff813077fa>] __device_attach+0x28/0x31
>> > > [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85
>> > > [<ffffffff81307891>] device_attach+0x65/0x7c
>> > > [<ffffffff8130667e>] bus_probe_device+0x27/0x3e
>> > > [<ffffffff813045b3>] device_add+0x3ab/0x57d
>> > > [<ffffffff8135616e>] usb_new_device+0x154/0x201
>> > > [<ffffffff8135b42e>] usb_add_hcd+0x4c5/0x69d
>> > > [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1
>> > > [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b
>> > > [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7
>> > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218
>> > > [<ffffffff813077ae>] __driver_attach+0x59/0x7d
>> > > [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83
>> > > [<ffffffff813073fd>] driver_attach+0x21/0x23
>> > > [<ffffffff81306487>] bus_add_driver+0xe1/0x26b
>> > > [<ffffffff81307ad5>] driver_register+0xa3/0x11a
>> > > [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2
>> > > [<ffffffff819f403b>] uhci_hcd_init+0x88/0xc1
>> > > [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b
>> > > [<ffffffff819c1961>] kernel_init+0x172/0x1cc
>> > > [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key
>> at:
>> > > [<ffffffff8268de38>] __key.33456+0x0/0x8 ... acquired at:
>> > > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5
>> > [<ffffffff8108f128>]
>> > > __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>]
>> > > lock_acquire+0xcd/0xf2 [<ffffffff81485526>]
>> > > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>]
>> > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>]
>> > > uhci_alloc_qh+0x33/0x146 [<ffffffff8137af66>]
>> > > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>]
>> > > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>]
>> > > usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>]
>> > > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>]
>> > > usb_control_msg+0xee/0x113 [<ffffffff813551fb>]
>> > > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>]
>> > > hub_events+0x91e/0x11a2 [<ffffffff81358432>]
>> > hub_thread+0x25/0x199
>> > > [<ffffffff8107b8fd>] kthread+0x6e/0x76
>> [<ffffffff81013eaa>]
>> > > child_rip+0xa/0x20 the dependencies between the lock to be
>> > acquired
>> > > and SOFTIRQ-irq-unsafe lock: -> (purge_lock){+.+...} ops: 0
>> {
>> > > HARDIRQ-ON-W at:
>> [<ffffffff8108eaba>]
>> > > __lock_acquire+0x31f/0xc07
>> > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2
>> > > [<ffffffff814853bc>] _spin_lock+0x36/0x6b
>> > > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a
>> > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176
>> > > [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82
>> > > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15
>> > > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3
>> > > [<ffffffff8110bf76>]
>> vmap_page_range_noflush+0x9a/0x264
>> > > [<ffffffff8110c161>]
>> vmap_page_range+0xe/0x10
>> > > [<ffffffff8110c197>] map_vm_area+0x34/0x47
>> > > [<ffffffff8110c2cf>]
>> > __vmalloc_area_node+0x125/0x14d
>> > > [<ffffffff8110c379>]
>> __vmalloc_node+0x82/0x91
>> > > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22
>> > > [<ffffffff819dfef1>]
>> > alloc_large_system_hash+0x150/0x1fe
>> > > [<ffffffff819e28c5>]
>> > vfs_caches_init+0xa9/0x11d
>> > > [<ffffffff819c1d99>]
>> > start_kernel+0x3de/0x426
>> > > [<ffffffff819c12c3>]
>> > > x86_64_start_reservations+0xae/0xb2
>> > > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0
>> > SOFTIRQ-ON-W at:
>> > > [<ffffffff8108eadc>]
>> > __lock_acquire+0x341/0xc07
>> > > [<ffffffff8108f46f>]
>> > lock_acquire+0xcd/0xf2
>> > > [<ffffffff814853bc>]
>> _spin_lock+0x36/0x6b
>> > > [<ffffffff8110aa20>]
>> > > __purge_vmap_area_lazy+0x54/0x18a
>> > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176
>> > > [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82
>> > > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15
>> > > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3
>> > > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264
>> > > [<ffffffff8110c161>] vmap_page_range+0xe/0x10
>> > > [<ffffffff8110c197>] map_vm_area+0x34/0x47
>> > > [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d
>> > > [<ffffffff8110c379>] __vmalloc_node+0x82/0x91
>> > > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22
>> > > [<ffffffff819dfef1>]
>> alloc_large_system_hash+0x150/0x1fe
>> > > [<ffffffff819e28c5>]
>> vfs_caches_init+0xa9/0x11d
>> > > [<ffffffff819c1d99>]
>> start_kernel+0x3de/0x426
>> > > [<ffffffff819c12c3>]
>> > > x86_64_start_reservations+0xae/0xb2
>> > > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0
>> INITIAL USE
>> > at:
>> > > [<ffffffff8108eb29>]
>> > __lock_acquire+0x38e/0xc07
>> > > [<ffffffff8108f46f>]
>> > lock_acquire+0xcd/0xf2
>> > > [<ffffffff814853bc>] _spin_lock+0x36/0x6b
>> > > [<ffffffff8110aa20>]
>> > __purge_vmap_area_lazy+0x54/0x18a
>> > > [<ffffffff8110c82f>]
>> > vm_unmap_aliases+0x167/0x176
>> > > [<ffffffff8100e58c>]
>> > xen_alloc_ptpage+0x51/0x82
>> > > [<ffffffff8100e5d0>]
>> > xen_alloc_pud+0x13/0x15
>> > > [<ffffffff810fe3cf>]
>> __pud_alloc+0x79/0xb3
>> > > [<ffffffff8110bf76>]
>> > vmap_page_range_noflush+0x9a/0x264
>> > > [<ffffffff8110c161>]
>> > vmap_page_range+0xe/0x10
>> > > [<ffffffff8110c197>]
>> map_vm_area+0x34/0x47
>> > > [<ffffffff8110c2cf>]
>> > __vmalloc_area_node+0x125/0x14d
>> > > [<ffffffff8110c379>]
>> > __vmalloc_node+0x82/0x91
>> > > [<ffffffff8110c4e9>]
>> __vmalloc+0x20/0x22
>> > > [<ffffffff819dfef1>]
>> > > alloc_large_system_hash+0x150/0x1fe
>> > > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d
>> > > [<ffffffff819c1d99>] start_kernel+0x3de/0x426
>> > > [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2
>> > > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0
>> }
>> > ...
>> > > key at: [<ffffffff81741ef8>] purge_lock.27226+0x18/0x40
>> > ...
>> > > acquired at: [<ffffffff8108f20c>]
>> __lock_acquire+0xa71/0xc07
>> > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2
>> > [<ffffffff814853bc>]
>> > > _spin_lock+0x36/0x6b [<ffffffff8110aa20>]
>> > > __purge_vmap_area_lazy+0x54/0x18a [<ffffffff8110c82f>]
>> > > vm_unmap_aliases+0x167/0x176 [<ffffffff8100d7ca>]
>> > > xen_create_contiguous_region+0x51/0x106
>> [<ffffffff81250d84>]
>> > > xen_swiotlb_alloc_coherent+0x62/0xa6 [<ffffffff8111188c>]
>> > > dma_pool_alloc+0x136/0x2a8 [<ffffffff81370efe>]
>> > > ehci_qh_alloc+0x44/0x107 [<ffffffff81373f5d>]
>> > > ehci_pci_setup+0x22a/0x9c1 [<ffffffff8135b18e>]
>> > > usb_add_hcd+0x225/0x69d [<ffffffff8136907b>]
>> > > usb_hcd_pci_probe+0x270/0x3b1 [<ffffffff8125a8ad>]
>> > > local_pci_probe+0x17/0x1b [<ffffffff8125b4c4>]
>> > > pci_device_probe+0xcb/0xf7 [<ffffffff81307635>]
>> > > driver_probe_device+0xf8/0x218 [<ffffffff813077ae>]
>> > > __driver_attach+0x59/0x7d [<ffffffff813069e1>]
>> > > bus_for_each_dev+0x54/0x83 [<ffffffff813073fd>]
>> > > driver_attach+0x21/0x23 [<ffffffff81306487>]
>> > > bus_add_driver+0xe1/0x26b [<ffffffff81307ad5>]
>> > > driver_register+0xa3/0x11a [<ffffffff8125b71b>]
>> > > __pci_register_driver+0x65/0xc2 [<ff
>>
>
[-- Attachment #1.2: Type: text/html, Size: 96219 bytes --]
[-- Attachment #2: CAPTURE.doc --]
[-- Type: application/msword, Size: 11619 bytes --]
[-- Attachment #3: Type: text/plain, Size: 137 bytes --]
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
next prev parent reply other threads:[~2010-03-18 0:34 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <9f975f341003121546m7042e458i67822a037076b828@mail.gmail.com>
[not found] ` <20100313001842.GO1878@reaktio.net>
[not found] ` <9f975f341003121641m17e7398cnd2398a3f50a1c78a@mail.gmail.com>
[not found] ` <20100313004730.GR1878@reaktio.net>
[not found] ` <9f975f341003151701u4e8da890ve2c11f5e66a44a93@mail.gmail.com>
[not found] ` <9f975f341003161032p423b5c7cs5bc9bcfb36620033@mail.gmail.com>
[not found] ` <20100316194344.GW1878@reaktio.net>
2010-03-16 19:48 ` pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 Pasi Kärkkäinen
2010-03-16 20:16 ` [Xen-devel] " Jeremy Fitzhardinge
2010-03-16 20:20 ` Re: [Xen-users] " Pasi Kärkkäinen
2010-03-16 21:16 ` [Xen-devel] " kishore kumar
2010-03-16 21:29 ` Re: [Xen-users] " Pasi Kärkkäinen
2010-03-16 21:56 ` [SPAM] Re: [Xen-devel] " kishore kumar
2010-03-16 22:03 ` Pasi Kärkkäinen
2010-03-16 22:22 ` kishore kumar
2010-03-16 22:29 ` Re: [Xen-users] " Pasi Kärkkäinen
2010-03-16 22:40 ` [Xen-devel] " kishore kumar
2010-03-16 23:18 ` Pasi Kärkkäinen
2010-03-17 22:20 ` kishore kumar
2010-03-18 0:34 ` kishore kumar [this message]
2010-03-18 16:15 ` Pasi Kärkkäinen
2010-03-18 18:16 ` kishore kumar
2010-03-18 19:31 ` Pasi Kärkkäinen
2010-03-18 20:23 ` kishore kumar
2010-03-18 21:27 ` Pasi Kärkkäinen
2010-03-18 23:56 ` kishore kumar
2010-03-19 17:59 ` [Xen-devel] Re: pvops dom0 kernel: crash in print_all_ICs() Pasi Kärkkäinen
2010-03-19 18:22 ` Re: [Xen-users] " Jeremy Fitzhardinge
2010-03-19 19:05 ` Pasi Kärkkäinen
2010-03-19 19:57 ` [Xen-devel] " kishore kumar
2010-03-19 20:03 ` Pasi Kärkkäinen
2010-03-22 20:23 ` kishore kumar
2010-03-22 20:31 ` Pasi Kärkkäinen
2010-03-22 21:48 ` kishore kumar
2010-03-23 7:04 ` Re: [Xen-users] " Pasi Kärkkäinen
2010-03-19 20:07 ` Konrad Rzeszutek Wilk
2010-03-19 20:45 ` [Xen-devel] " Pasi Kärkkäinen
2010-03-23 15:23 ` Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 Tobias Geiger
2010-03-23 17:00 ` Jeremy Fitzhardinge
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9f975f341003171734n6baad14ai11a5292cf8f40806@mail.gmail.com \
--to=bodkekumar@gmail.com \
--cc=jeremy@goop.org \
--cc=pasik@iki.fi \
--cc=xen-devel@lists.xensource.com \
--cc=xen-users@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).