From: kishore kumar <bodkekumar@gmail.com>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>,
xen-devel@lists.xensource.com, xen-users@lists.xensource.com
Subject: Re: [Xen-devel] Re: pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9
Date: Thu, 18 Mar 2010 11:16:26 -0700 [thread overview]
Message-ID: <9f975f341003181116w3501badar59252aba40adae40@mail.gmail.com> (raw)
In-Reply-To: <20100318161518.GN1878@reaktio.net>
[-- Attachment #1.1: Type: text/plain, Size: 77540 bytes --]
I did the below steps for pvops dom 0 kernel.
make menuconfig
make bzImage
make modules
make modules_install
cp -a .config /boot/config-2.6.32.10
cp -a System.map /boot/System.map-2.6.32.10
cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10
/sbin/mkinitrd -f --builtin=ahci /boot/initrd-2.6.32.10.img 2.6.32.10
I tried root=/dev/VolGroup01/LogVol00 .
On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen <pasik@iki.fi> wrote:
> On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore kumar wrote:
> > Here is the output of df -h and cat /etc/fstab of my machine.
> >
>
> Did you try both root=/dev/mapper/VolGroup01-LogVol00 and
> root=/dev/VolGroup01/LogVol00 arguments for the dom0 kernel?
>
> How did you generate the initrd image for the dom0 kernel?
>
> Anyway this sounds like a grub.conf or initrd problem, not Xen or pvops
> dom0 kernel kernel problem.
>
> -- Pasi
>
> > Please let me know your thoughts.
> >
> > [root@localhost kishore]# df -h
> >
> > Filesystem Size Used Avail Use% Mounted on
> >
> > /dev/mapper/VolGroup01-LogVol00
> >
> > 223G 29G 182G 14% /
> >
> > /dev/sda1 99M 81M 13M 87% /boot
> >
> > tmpfs 757M 0 757M 0% /dev/shm
> >
> > [root@localhost kishore]# cat /etc/fstab
> >
> > /dev/VolGroup01/LogVol00 / ext3 defaults 1 1
> >
> > LABEL=/boot /boot ext3 defaults 1 2
> >
> > tmpfs /dev/shm tmpfs defaults 0 0
> >
> > devpts /dev/pts devpts gid=5,mode=620 0 0
> >
> > sysfs /sys sysfs defaults 0 0
> >
> > proc /proc proc defaults 0 0
> >
> > /dev/VolGroup01/LogVol01 swap swap defaults 0 0
> >
> > [root@localhost kishore]#
> >
> > On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen <[1]pasik@iki.fi>
> wrote:
> >
> > On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore kumar wrote:
> > > I am not sure. Can you please let me know how to check this?
> any
> > command
> > > ??
> >
> > well simple "df -h" will show it. and also "cat /etc/fstab".
> > You can also check it from your grub configuration.. from the
> working
> > baremetal (non-Xen) entry.
> >
> > -- Pasi
> > >
> > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi Kärkkäinen
> > <[1][2]pasik@iki.fi> wrote:
> > >
> > > On Tue, Mar 16, 2010 at 03:22:50PM -0700, kishore kumar
> wrote:
> > > > attached is the log captured in with the word document
> .
> > > >
> > >
> > > Scanning logical volumes
> > > Reading all physical volumes. This may take a while...
> > > Activating logical volumes
> > > Volume group "VolGroup01" not found
> > > Trying to resume from /dev/VolGroup01/LogVol01
> > > Unable to access resume device (/dev/VolGroup01/LogVol01)
> > > Creating root device.
> > > Mounting root filesystem.
> > > mount: could not find filesystem '/dev/root'
> > > Setting up other filesystems.
> > > Setting up new root fs
> > > setuproot: moving /dev failed: No such file or directory
> > > no fstab.sys, mounting internal defaults
> > > setuproot: error mounting /proc: No such file or directory
> > > setuproot: error mounting /sys: No such file or directory
> > > Switching to new root and running init.
> > > unmounting old /dev
> > > unmounting old /proc
> > > unmounting old /sys
> > > switchroot: mount failed: No such file or directory
> > > init used greatest stack depth: 4088 bytes left
> > > Kernel panic - not syncing: Attempted to kill init!
> > >
> > > So it seems it gets all the way to executing the initrd
> image,
> > > which then fails to mount the root fs.
> > >
> > > Earlier in the log:
> > > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > > ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA, max
> UDMA/133
> > > ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32),
> AA
> > > ata1.00: configured for UDMA/133
> > > scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102
> STBO
> > PQ: 0
> > > ANSI: 5
> > > sd 0:0:0:0: Attached scsi generic sg0 type 0
> > > sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250
> GB/232
> > GiB)
> > > sd 0:0:0:0: [sda] Write Protect is off
> > > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
> > doesn't
> > > support DPO or FUA
> > > sda: sda1 sda2
> > > sd 0:0:0:0: [sda] Attached SCSI disk
> > >
> > > so /dev/sda was detected. Is your root lvm volume on /dev/sda
> ?
> > > Is /dev/VolGroup01/LogVol01 really your root fs?
> > >
> > > -- Pasi
> > >
> > > >
> > > >
> > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi Kärkkäinen
> > > <[1][2][3]pasik@iki.fi> wrote:
> > > >
> > > > On Tue, Mar 16, 2010 at 02:56:06PM -0700, kishore
> kumar
> > wrote:
> > > > > Please find the attached log file after fixing
> the
> > dom 0
> > > kernel cmd
> > > > line
> > > > > as below
> > > > >
> > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0
> > > earlyprintk=xen
> > > > nomodeset
> > > > >
> > > >
> > > > There's something wrong with the log, the dom0 kernel
> > parts are
> > > all on
> > > > one line..
> > > > It's really difficult to read it.
> > > >
> > > > -- Pasi
> > > >
> > > > > Thanks
> > > > >
> > > > >
> > > > > On Tue, Mar 16, 2010 at 2:29 PM, Pasi Kärkkäinen
> > > > <[1][2][3][4]pasik@iki.fi> wrote:
> > > > >
> > > > > On Tue, Mar 16, 2010 at 02:16:22PM -0700,
> kishore
> > kumar
> > > wrote:
> > > > > > I did below steps.
> > > > > >
> > > > > >
> > > > > > I pulled DOM 0 kernel from
> > > > > > git clone
> > > > >
> > > >
> > >
> > git://[1][2][3][4][5]
> git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > linux-2.6-xen
> > > > > >
> > > > > > cd linux-2.6-xen
> > > > > >
> > > > > > make clean
> > > > > >
> > > > > > cp -a .config .config-old
> > > > > >
> > > > > > wget -O .config
> > > > > >
> > > > >
> > > >
> > >
> > [2][3][4][5][6]
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > > > > >
> > > > > > make oldconfig
> > > > > >
> > > > > > make bzImage
> > > > > >
> > > > > > make modules
> > > > > >
> > > > > > make modules_install
> > > > > >
> > > > > > cp -a .config /boot/config-2.6.32.9
> > > > > >
> > > > > > cp -a System.map /boot/System.map-2.6.32.9
> > > > > >
> > > > > > cp -a arch/x86/boot/bzImage
> > /boot/vmlinuz-2.6.32.9
> > > > > >
> > > > > > and modified the grub.conf as below
> > > > > >
> > > > > >
> > > > > > Root(hd0,0)
> > > > > >
> > > > > > kernel /xen.gz console=vga,com1
> > com1=115200,8n1
> > > msi=1
> > > > iommu=1
> > > > > >
> > > > > > module /vmlinuz-2.6.32.9 ro
> > > root=/dev/VolGroup01/LogVo100
> > > > rhgb
> > > > > quiet
> > > > > >
> > > > > > module /initrd-2.6.32.9.img
> > > > > >
> > > > > >
> > > > > > and rebooted the machine. Then It booted
> with
> > some
> > > xen
> > > > messages
> > > > > and
> > > > > > stopped. Those were the messages captured
> > from
> > > serial
> > > > console.
> > > > > >
> > > > > > Please let me know if I did something
> wrong
> > here.
> > > > > >
> > > > >
> > > > > Please fix the kernel cmdline based on my
> earlier
> > email,
> > > and
> > > > capture and
> > > > > post the
> > > > > serial console log again!
> > > > >
> > > > > -- Pasi
> > > > > >
> > > > > >
> > > > > > On Tue, Mar 16, 2010 at 1:20 PM, Pasi
> > Kärkkäinen
> > > > > <[3][4][5][6][7]pasik@iki.fi> wrote:
> > > > > >
> > > > > > On Tue, Mar 16, 2010 at 01:16:28PM
> -0700,
> > Jeremy
> > > > Fitzhardinge
> > > > > wrote:
> > > > > > > On 03/16/2010 12:48 PM, Pasi
> Kärkkäinen
> > wrote:
> > > > > > >> On Tue, Mar 16, 2010 at 09:43:44PM
> +0200,
> > Pasi
> > > > Kärkkäinen
> > > > > wrote:
> > > > > > >>
> > > > > > >>> On Tue, Mar 16, 2010 at 10:32:17AM
> > -0700,
> > > kishore
> > > > kumar
> > > > > wrote:
> > > > > > >>>
> > > > > > >>>> Attached is the output captured
> > from
> > > serial
> > > > console.
> > > > > > >>>>
> > > > > > >>>> Machine does not boot after
> > compiling xen
> > > 3.4.3
> > > > with
> > > > > pv_ops dom
> > > > > > 0 kernel.
> > > > > > >>>>
> > > > > > >>>> Please let me know what is
> going
> > wrong
> > > here.
> > > > > > >>>>
> > > > > > >>>>
> > > > > > >>> Ok this looks like a bug that is
> already
> > being
> > > sorted
> > > > out on
> > > > > > xen-devel mailinglist.
> > > > > > >>> I added CC to xen-devel.
> > > > > > >>>
> > > > > > >>>
> > > > > > >>
> > > > > > >
> > > > > > > Those messages are not a problem in
> > themselves,
> > > but the
> > > > related
> > > > > > problem
> > > > > > > is believed to be fixed in current
> > > xen/stable-2.6.32.x.
> > > > It
> > > > > looks like
> > > > > > > the output stops there because the Xen
> > console
> > > isn't set
> > > > up
> > > > > properly
> > > > > > for
> > > > > > > some reason.
> > > > > > >
> > > > > >
> > > > > > Yeah, remove "rhgb quiet" from the
> options..
> > the
> > > dom0
> > > > kernel
> > > > > cmdline
> > > > > > should be like this:
> > > > > > ro root=/dev/VolGroup01/LogVol00
> > console=hvc0
> > > > earlyprintk=xen
> > > > > nomodeset
> > > > > > -- Pasi
> > > > > >
> > > > > > References
> > > > > >
> > > > > > Visible links
> > > > > > 1.
> > > >
> > >
> > [5][6][7][8]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 2.
> > > > >
> > > >
> > >
> > [6][7][8][9]
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > > > > > 3. mailto:[7][8][9][10]pasik@iki.fi
> > > > >
> > > > > References
> > > > >
> > > > > Visible links
> > > > > 1. mailto:[9][10][11]pasik@iki.fi
> > > > > 2.
> > > >
> > >
> > [10][11][12]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > 3.
> > > >
> > >
> > [11][12][13]
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > > > > 4. mailto:[12][13][14]pasik@iki.fi
> > > > > 5.
> > > >
> > >
> > [13][14][15]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > 6.
> > > >
> > >
> > [14][15][16]
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > > > > 7. mailto:[15][16][17]pasik@iki.fi
> > > > > Asserting Post complete GPIO!!!
> > > > > Transfer control to CSM 16-bit binary for legacy
> boot
> > > > > __ __ _____ _ _ _____ _
> _
> > > > > \ \/ /___ _ __ |___ /| || | |___ / _ __ ___|
> || |
> > _
> > > __ _
> > > > __ ___
> > > > > \ // _ \ '_ \ |_ \| || |_ |_ \ __| '__/ __|
> ||
> > |_ __|
> > > '_ \|
> > > > '__/ _ \
> > > > > / \ __/ | | | ___) |__ _| ___) |__| | |
> (__|__
> > _|__|
> > > |_) | |
> > > > | __/
> > > > > /_/\_\___|_| |_| |____(_) |_|(_)____/ |_| \___|
> |_|
> > |
> > > .__/|_|
> > > > \___|
> > > > >
> > |_|
> > > > > (XEN) Xen version 3.4.3-rc4-pre (kishore@localdomain
> )
> > (gcc
> > > version
> > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar 15 13:44:31
> PDT
> > 2010
> > > > > (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 2010
> +0000
> > > > 19924:6e72f8c3c017
> > > > > (XEN) Command line: console=vga,com1 com1=115200,8n1
> > msi=1
> > > iommu=1
> > > > > (XEN) Video information:
> > > > > (XEN) VGA is text mode 80x25, font 8x16
> > > > > (XEN) VBE/DDC methods: none; EDID transfer time: 0
> > seconds
> > > > > (XEN) EDID info not retrieved because no DDC
> retrieval
> > method
> > > > detected
> > > > > (XEN) Disc information:
> > > > > (XEN) Found 1 MBR signatures
> > > > > (XEN) Found 1 EDD information structures
> > > > > (XEN) Xen-e820 RAM map:
> > > > > (XEN) 0000000000000000 - 000000000009d000 (usable)
> > > > > (XEN) 000000000009d000 - 00000000000a0000
> (reserved)
> > > > > (XEN) 00000000000e0000 - 0000000000100000
> (reserved)
> > > > > (XEN) 0000000000100000 - 000000006d597000 (usable)
> > > > > (XEN) 000000006d597000 - 000000006d686000
> (reserved)
> > > > > (XEN) 000000006d686000 - 000000006f598000 (usable)
> > > > > (XEN) 000000006f598000 - 000000006f59a000
> (reserved)
> > > > > (XEN) 000000006f59a000 - 000000006f5af000 (ACPI
> NVS)
> > > > > (XEN) 000000006f5af000 - 000000006f5d9000
> (reserved)
> > > > > (XEN) 000000006f5d9000 - 000000006f5f9000 (ACPI
> data)
> > > > > (XEN) 000000006f5f9000 - 000000006f6df000 (ACPI
> NVS)
> > > > > (XEN) 000000006f6df000 - 000000006f700000 (ACPI
> data)
> > > > > (XEN) 000000006f700000 - 0000000080000000
> (reserved)
> > > > > (XEN) 00000000a0000000 - 00000000b0000000
> (reserved)
> > > > > (XEN) 00000000fc000000 - 00000000fd000000
> (reserved)
> > > > > (XEN) 00000000fed1c000 - 00000000fed20000
> (reserved)
> > > > > (XEN) 00000000ffc00000 - 0000000100000000
> (reserved)
> > > > > (XEN) System RAM: 1780MB (1823000kB)
> > > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL )
> > > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL THRLY
> > 0
> > > > 1000013)
> > > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL THRLY
> > 0
> > > MSFT
> > > > 100000D)
> > > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL THRLY
> > 3
> > > MSFT
> > > > 100000D)
> > > > > (XEN) ACPI: FACS 6F5F9000, 0040
> > > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL THRLY
> > 0
> > > MSFT
> > > > 100000D)
> > > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL THRLY
> > 1
> > > MSFT
> > > > 100000D)
> > > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL THRLY
> > 1
> > > MSFT
> > > > 100000D)
> > > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL THRLY
> > 1
> > > MSFT
> > > > 100000D)
> > > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL THRLY
> > 0
> > > MSFT
> > > > 100000D)
> > > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 INTEL SSDT PM
> > 4000
> > > INTL
> > > > 20061109)
> > > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL THRLY
> > 1
> > > MSFT
> > > > 100000D)
> > > > > (XEN) Domain heap initialised
> > > > > (XEN) Processor #0 6:12 APIC version 21
> > > > > (XEN) Processor #2 6:12 APIC version 21
> > > > > (XEN) Processor #4 6:12 APIC version 21
> > > > > (XEN) Processor #16 6:12 APIC version 21
> > > > > (XEN) Processor #18 6:12 APIC version 21
> > > > > (XEN) Processor #20 6:12 APIC version 21
> > > > > (XEN) Processor #1 6:12 APIC version 21
> > > > > (XEN) Processor #3 6:12 APIC version 21
> > > > > (XEN) Processor #5 6:12 APIC version 21
> > > > > (XEN) Processor #17 6:12 APIC version 21
> > > > > (XEN) Processor #19 6:12 APIC version 21
> > > > > (XEN) Processor #21 6:12 APIC version 21
> > > > > (XEN) IOAPIC[0]: apic_id 8, version 32, address
> > 0xfec00000, GSI
> > > 0-23
> > > > > (XEN) IOAPIC[1]: apic_id 9, version 32, address
> > 0xfec90000, GSI
> > > 24-47
> > > > > (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs
> > > > > (XEN) Intel VT-d DMAR tables have been parsed.
> > > > > (XEN) Using scheduler: SMP Credit Scheduler (credit)
> > > > > (XEN) Detected 3200.207 MHz processor.
> > > > > (XEN) VMX: Supported advanced features:
> > > > > (XEN) - APIC MMIO access virtualisation
> > > > > (XEN) - APIC TPR shadow
> > > > > (XEN) - Extended Page Tables (EPT)
> > > > > (XEN) - Virtual-Processor Identifiers (VPID)
> > > > > (XEN) - Virtual NMI
> > > > > (XEN) - MSR direct-access bitmap
> > > > > (XEN) VMX: EPT is available.
> > > > > (XEN) VMX: VPID is available.
> > > > > (XEN) HVM: VMX enabled
> > > > > (XEN) HVM: Hardware Assisted Paging detected.
> > > > > (XEN) CPU0: Intel Genuine Intel(R) CPU
> 000
> > @
> > > 3.20GHz
> > > > stepping 00
> > > > > (XEN) Booting processor 1/2 eip 88000
> > > > > (XEN) CPU1: Intel Genuine Intel(R) CPU
> 000
> > @
> > > 3.20GHz
> > > > stepping 00
> > > > > (XEN) Booting processor 2/4 eip 88000
> > > > > (XEN) CPU2: Intel Genuine Intel(R) CPU
> 000
> > @
> > > 3.20GHz
> > > > stepping 00
> > > > > (XEN) Booting processor 3/16 eip 88000
> > > > > (XEN) CPU3: Intel Genuine Intel(R) CPU
> 000
> > @
> > > 3.20GHz
> > > > stepping 00
> > > > > (XEN) Booting processor 4/18 eip 88000
> > > > > (XEN) CPU4: Intel Genuine Intel(R) CPU
> 000
> > @
> > > 3.20GHz
> > > > stepping 00
> > > > > (XEN) Booting processor 5/20 eip 88000
> > > > > (XEN) CPU5: Intel Genuine Intel(R) CPU
> 000
> > @
> > > 3.20GHz
> > > > stepping 00
> > > > > (XEN) Booting processor 6/1 eip 88000
> > > > > (XEN) CPU6: Intel Genuine Intel(R) CPU
> 000
> > @
> > > 3.20GHz
> > > > stepping 00
> > > > > (XEN) Booting processor 7/3 eip 88000
> > > > > (XEN) CPU7: Intel Genuine Intel(R) CPU
> 000
> > @
> > > 3.20GHz
> > > > stepping 00
> > > > > (XEN) Booting processor 8/5 eip 88000
> > > > > (XEN) CPU8: Intel Genuine Intel(R) CPU
> 000
> > @
> > > 3.20GHz
> > > > stepping 00
> > > > > (XEN) Booting processor 9/17 eip 88000
> > > > > (XEN) CPU9: Intel Genuine Intel(R) CPU
> 000
> > @
> > > 3.20GHz
> > > > stepping 00
> > > > > (XEN) Booting processor 10/19 eip 88000
> > > > > (XEN) CPU10: Intel Genuine Intel(R) CPU
> 000
> > @
> > > 3.20GHz
> > > > stepping 00
> > > > > (XEN) Booting processor 11/21 eip 88000
> > > > > (XEN) CPU11: Intel Genuine Intel(R) CPU
> 000
> > @
> > > 3.20GHz
> > > > stepping 00
> > > > > (XEN) Total of 12 processors activated.
> > > > > (XEN) ENABLING IO-APIC IRQs
> > > > > (XEN) -> Using new ACK method
> > > > > (XEN) checking TSC synchronization across 12 CPUs:
> > passed.
> > > > > (XEN) Platform timer is 14.318MHz HPET
> > > > > ?(XEN) Brought up 12 CPUs
> > > > > (XEN) Intel VT-d Snoop Control supported.
> > > > > (XEN) Intel VT-d DMA Passthrough not supported.
> > > > > (XEN) Intel VT-d Queued Invalidation supported.
> > > > > (XEN) Intel VT-d Interrupt Remapping supported.
> > > > > (XEN) I/O virtualisation enabled
> > > > > (XEN) I/O virtualisation for PV guests disabled
> > > > > (XEN) xenoprof: Initialization failed. Intel
> processor
> > model 44
> > > for P6
> > > > class family is not supported
> > > > > (XEN) *** LOADING DOMAIN 0 ***
> > > > > (XEN) Xen kernel: 64-bit, lsb, compat32
> > > > > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr
> 0x1000000 ->
> > > 0x26bb000
> > > > > (XEN) PHYSICAL MEMORY ARRANGEMENT:
> > > > > (XEN) Dom0 alloc.:
> 0000000064000000->0000000068000000
> > > (404490 pages
> > > > to be allocated)
> > > > > (XEN) VIRTUAL MEMORY ARRANGEMENT:
> > > > > (XEN) Loaded kernel:
> ffffffff81000000->ffffffff826bb000
> > > > > (XEN) Init. ramdisk:
> ffffffff826bb000->ffffffff82d0d800
> > > > > (XEN) Phys-Mach map:
> ffffffff82d0e000->ffffffff83044050
> > > > > (XEN) Start info:
> ffffffff83045000->ffffffff830454b4
> > > > > (XEN) Page tables:
> ffffffff83046000->ffffffff83063000
> > > > > (XEN) Boot stack:
> ffffffff83063000->ffffffff83064000
> > > > > (XEN) TOTAL:
> ffffffff80000000->ffffffff83400000
> > > > > (XEN) ENTRY ADDRESS: ffffffff819c1200
> > > > > (XEN) Dom0 has maximum 12 VCPUs
> > > > > (XEN) Scrubbing Free RAM: .done.
> > > > > (XEN) Xen trace buffers: disabled
> > > > > (XEN) Std. Loglevel: Errors and warnings
> > > > > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors
> and
> > > warnings)
> > > > > (XEN) Xen is relinquishing VGA console.
> > > > > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three
> > times to
> > > switch
> > > > input to Xen)
> > > > > (XEN) Freed 128kB init memory.
> > > > > mapping kernel into physical memory
> > > > > Xen: setup ISA identity maps
> > > > > about to get started...
> > > > > Initializing cgroup subsys cpuset
> > > > > Initializing cgroup subsys cpu
> > > > > Linux version 2.6.32.9
> (kishore@localhost.localdomain)
> > (gcc
> > > version
> > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 15
> > 15:16:28 PDT
> > > 2010
> > > > > Command line: ro root=/dev/VolGroup01/LogVol00
> > console=hvc0
> > > > earlyprintk=xen nomodeset
> > > > > KERNEL supported cpus:
> > > > > Intel GenuineIntel
> > > > > AMD AuthenticAMD
> > > > > Centaur CentaurHauls
> > > > > BIOS-provided physical RAM map:
> > > > > Xen: 0000000000000000 - 000000000009d000 (usable)
> > > > > Xen: 000000000009d000 - 0000000000100000 (reserved)
> > > > > Xen: 0000000000100000 - 0000000066c0a000 (usable)
> > > > > Xen: 000000006d597000 - 000000006d686000 (reserved)
> > > > > Xen: 000000006f598000 - 000000006f59a000 (reserved)
> > > > > Xen: 000000006f59a000 - 000000006f5af000 (ACPI NVS)
> > > > > Xen: 000000006f5af000 - 000000006f5d9000 (reserved)
> > > > > Xen: 000000006f5d9000 - 000000006f5f9000 (ACPI
> data)
> > > > > Xen: 000000006f5f9000 - 000000006f6df000 (ACPI NVS)
> > > > > Xen: 000000006f6df000 - 000000006f700000 (ACPI
> data)
> > > > > Xen: 000000006f700000 - 0000000080000000 (reserved)
> > > > > Xen: 00000000a0000000 - 00000000b0000000 (reserved)
> > > > > Xen: 00000000fc000000 - 00000000fd000000 (reserved)
> > > > > Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
> > > > > Xen: 00000000ffc00000 - 0000000100000000 (reserved)
> > > > > bootconsole [xenboot0] enabled
> > > > > DMI 2.4 present.
> > > > > last_pfn = 0x66c0a max_arch_pfn = 0x400000000
> > > > > init_memory_mapping:
> 0000000000000000-0000000066c0a000
> > > > > RAMDISK: 026bb000 - 02d0d800
> > > > > ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL )
> > > > > ACPI: XSDT 000000006f6fe120 00064 (v01 INTEL THRLY
> > 00000000
> > > > 01000013)
> > > > > ACPI: FACP 000000006f6fd000 000F4 (v04 INTEL THRLY
> > 00000000
> > > MSFT
> > > > 0100000D)
> > > > > ACPI: DSDT 000000006f6f5000 074F1 (v02 INTEL THRLY
> > 00000003
> > > MSFT
> > > > 0100000D)
> > > > > ACPI: FACS 000000006f5f9000 00040
> > > > > ACPI: APIC 000000006f6f4000 001CC (v02 INTEL THRLY
> > 00000000
> > > MSFT
> > > > 0100000D)
> > > > > ACPI: MCFG 000000006f6f3000 0003C (v01 INTEL THRLY
> > 00000001
> > > MSFT
> > > > 0100000D)
> > > > > ACPI: HPET 000000006f6f2000 00038 (v01 INTEL THRLY
> > 00000001
> > > MSFT
> > > > 0100000D)
> > > > > ACPI: SLIT 000000006f6f1000 00030 (v01 INTEL THRLY
> > 00000001
> > > MSFT
> > > > 0100000D)
> > > > > ACPI: WDDT 000000006f6f0000 00040 (v01 INTEL THRLY
> > 00000000
> > > MSFT
> > > > 0100000D)
> > > > > ACPI: SSDT 000000006f5d9000 1FDDC (v01 INTEL SSDT
> PM
> > 00004000
> > > INTL
> > > > 20061109)
> > > > > ACPI: 000000006f6ee000 001D0 (v01 INTEL THRLY
> > 00000001
> > > MSFT
> > > > 0100000D)
> > > > > No NUMA configuration found
> > > > > Faking a node at 0000000000000000-0000000066c0a000
> > > > > Bootmem setup node 0
> 0000000000000000-0000000066c0a000
> > > > > NODE_DATA [0000000000008000 - 000000000001ffff]
> > > > > bootmap [0000000000020000 - 000000000002cd87]
> pages d
> > > > > (9 early reservations) ==> bootmem [0000000000 -
> > 0066c0a000]
> > > > > #0 [0000000000 - 0000001000] BIOS data page ==>
> > [0000000000
> > > -
> > > > 0000001000]
> > > > > #1 [0003046000 - 0003063000] XEN PAGETABLES ==>
> > [0003046000
> > > -
> > > > 0003063000]
> > > > > #2 [0000006000 - 0000008000] TRAMPOLINE ==>
> > [0000006000
> > > -
> > > > 0000008000]
> > > > > #3 [0001000000 - 000269ae98] TEXT DATA BSS ==>
> > [0001000000
> > > -
> > > > 000269ae98]
> > > > > #4 [00026bb000 - 0002d0d800] RAMDISK ==>
> > [00026bb000
> > > -
> > > > 0002d0d800]
> > > > > #5 [0002d0e000 - 0003046000] XEN START INFO ==>
> > [0002d0e000
> > > -
> > > > 0003046000]
> > > > > #6 [000269b000 - 000269b011] BRK ==>
> > [000269b000
> > > -
> > > > 000269b011]
> > > > > #7 [0000100000 - 000041a000] PGTABLE ==>
> > [0000100000
> > > -
> > > > 000041a000]
> > > > > #8 [0000001000 - 0000001030] ACPI SLIT ==>
> > [0000001000
> > > -
> > > > 0000001030]
> > > > > found SMP MP-table at [ffff8800000fd750] fd750
> > > > > Zone PFN ranges:
> > > > > DMA 0x00000000 -> 0x00001000
> > > > > DMA32 0x00001000 -> 0x00100000
> > > > > Normal 0x00100000 -> 0x00100000
> > > > > Movable zone start PFN for each node
> > > > > early_node_map[2] active PFN ranges
> > > > > 0: 0x00000000 -> 0x0000009d
> > > > > 0: 0x00000100 -> 0x00066c0a
> > > > > ACPI: PM-Timer IO Port: 0x408
> > > > > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> > > > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
> > > > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
> > > > > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled)
> > > > > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled)
> > > > > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
> > > > > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] enabled)
> > > > > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
> > > > > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] enabled)
> > > > > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)
> > > > > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled)
> > > > > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled)
> > > > > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled)
> > > > > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled)
> > > > > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled)
> > > > > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled)
> > > > > ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled)
> > > > > ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled)
> > > > > ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled)
> > > > > ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled)
> > > > > ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled)
> > > > > ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled)
> > > > > ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled)
> > > > > ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled)
> > > > > ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1])
> > > > > ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1])
> > > > > ACPI: IOAPIC (id[0x08] address[0xfec00000]
> gsi_base[0])
> > > > > IOAPIC[0]: apic_id 8, version 0, address 0xfec00000,
> GSI
> > 0-0
> > > > > ACPI: IOAPIC (id[0x09] address[0xfec90000]
> gsi_base[24])
> > > > > IOAPIC[1]: apic_id 9, version 0, address 0xfec90000,
> GSI
> > 24-24
> > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
> dfl)
> > > > > ERROR: Unable to locate IOAPIC for GSI 2
> > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
> > level)
> > > > > ERROR: Unable to locate IOAPIC for GSI 9
> > > > > Using ACPI (MADT) for SMP configuration information
> > > > > ACPI: HPET id: 0x8086a401 base: 0xfed00000
> > > > > SMP: Allowing 12 CPUs, 0 hotplug CPUs
> > > > > PM: Registered nosave memory: 000000000009d000 -
> > > 0000000000100000
> > > > > Allocating PCI resources starting at b0000000 (gap:
> > > b0000000:4c000000)
> > > > > Booting paravirtualized kernel on Xen
> > > > > Xen version: 3.4.3-rc4-pre (preserve-AD) (dom0)
> > > > > NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12
> > nr_node_ids:1
> > > > > PERCPU: Embedded 478 pages/cpu @ffff880005ebc000
> > s1928024 r8192
> > > d21672
> > > > u1957888
> > > > > pcpu-alloc: s1928024 r8192 d21672 u1957888
> > alloc=478*4096
> > > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0]
> 05
> > [0] 06
> > > [0] 07
> > > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11
> > > > > Xen: using vcpu_info placement
> > > > > Built 1 zonelists in Node order, mobility grouping
> on.
> > Total
> > > pages:
> > > > 409291
> > > > > Policy zone: DMA32
> > > > > Kernel command line: ro
> root=/dev/VolGroup01/LogVol00
> > > console=hvc0
> > > > earlyprintk=xen nomodeset
> > > > > PID hash table entries: 4096 (order: 3, 32768 bytes)
> > > > > Initializing CPU#0
> > > > > DMA: Placing 64MB software IO TLB between
> > ffff880007525000 -
> > > > ffff88000b525000
> > > > > DMA: software IO TLB at phys 0x7525000 - 0xb525000
> > > > > xen_swiotlb_fixup: buf=ffff880007525000
> size=67108864
> > > > > xen_swiotlb_fixup: buf=ffff88000b585000 size=32768
> > > > > Memory: 1514268k/1683496k available (4654k kernel
> code,
> > 396k
> > > absent,
> > > > 168832k reserved, 3443k data, 3396k init)
> > > > > SLUB: Genslabs=14, HWalign=64, Order=0-3,
> MinObjects=0,
> > > CPUs=12,
> > > > Nodes=1
> > > > > Hierarchical RCU implementation.
> > > > > NR_IRQS:4352 nr_irqs:3072
> > > > > Already setup the GSI :0
> > > > > Already setup the GSI :1
> > > > > Already setup the GSI :2
> > > > > Already setup the GSI :3
> > > > > Already setup the GSI :4
> > > > > Already setup the GSI :5
> > > > > Already setup the GSI :6
> > > > > Already setup the GSI :7
> > > > > Already setup the GSI :8
> > > > > Already setup the GSI :9
> > > > > Already setup the GSI :10
> > > > > Already setup the GSI :11
> > > > > Already setup the GSI :12
> > > > > Already setup the GSI :13
> > > > > Already setup the GSI :14
> > > > > Already setup the GSI :15
> > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
> dfl)
> > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
> > level)
> > > > > xen: sci override: source_irq=9 global_irq=9
> trigger=c
> > > polarity=1
> > > > > xen_allocate_pirq: returning irq 9 for gsi 9
> > > > > Already setup the GSI :9
> > > > > xen: acpi sci 9
> > > > > Console: colour VGA+ 80x25
> > > > > console [hvc0] enabled, bootconsole disabled console
> > [hvc0]
> > > enabled,
> > > > bootconsole disabled
> > > > > Lock dependency validator: Copyright (c) 2006 Red
> Hat,
> > Inc.,
> > > Ingo
> > > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ...
> MAX_LOCK_DEPTH:
> > > 48
> > > > ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE:
> > > 4096 ...
> > > > MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS:
> > 32768
> > > ...
> > > > CHAINHASH_SIZE: 16384 memory used by lock
> > dependency
> > > info:
> > > > 6367 kB per task-struct memory footprint: 2688 bytes
> > allocated
> > > 17039360
> > > > bytes of page_cgroup please try
> 'cgroup_disable=memory'
> > option if
> > > you
> > > > don't want memory cgroups installing Xen timer for CPU
> 0
> > Detected
> > > > 3200.206 MHz processor. Calibrating delay loop
> (skipped),
> > value
> > > > calculated using timer frequency.. 6400.41 BogoMIPS
> > (lpj=3200206)
> > > > Security Framework initialized SELinux: Initializing.
> > Dentry
> > > cache hash
> > > > table entries: 262144 (order: 9, 2097152 bytes)
> > Inode-cache hash
> > > table
> > > > entries: 131072 (order: 8, 1048576 bytes) Mount-cache
> hash
> > table
> > > > entries: 256 Initializing cgroup subsys ns
> Initializing
> > cgroup
> > > subsys
> > > > cpuacct Initializing cgroup subsys memory Initializing
> > cgroup
> > > subsys
> > > > devices Initializing cgroup subsys freezer
> Initializing
> > cgroup
> > > subsys
> > > > net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2
> > cache: 256K
> > > CPU:
> > > > L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU: Unsupported
> > number of
> > > siblings
> > > > 32 Performance Events: unsupported p6 CPU model 44 no
> PMU
> > driver,
> > > > software events only. lockdep: fixing up alternatives.
> SMP
> > > alternatives:
> > > > switching to UP code ACPI: Core revision 20090903
> ftrace:
> > > converting
> > > > mcount calls to 0f 1f 44 00 00 ftrace: allocating
> 27971
> > entries
> > > in 110
> > > > pages installing Xen timer for CPU 1 lockdep: fixing
> up
> > > alternatives.
> > > > SMP alternatives: switching to SMP code Initializing
> CPU#1
> > CPU:
> > > L1 I
> > > > cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU:
> L3
> > cache:
> > > 12288K
> > > > CPU 1/0x0 -> Node 0 CPU: Unsupported number of
> siblings 32
> > > installing
> > > > Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I
> cache:
> > 32K, L1 D
> > > cache:
> > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU
> 2/0x0 ->
> > Node 0
> > > CPU:
> > > > Unsupported number of siblings 32 installing Xen timer
> for
> > CPU 3
> > > > Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache:
> 32K
> > CPU: L2
> > > cache:
> > > > 256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node 0 CPU:
> > Unsupported
> > > number
> > > > of siblings 32 installing Xen timer for CPU 4
> Initializing
> > CPU#4
> > > CPU: L1
> > > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU:
> L3
> > cache:
> > > 12288K
> > > > CPU 4/0x0 -> Node 0 CPU: Unsupported number of
> siblings 32
> > > installing
> > > > Xen timer for CPU 5 Initializing CPU#5 CPU: L1 I
> cache:
> > 32K, L1 D
> > > cache:
> > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU
> 5/0x0 ->
> > Node 0
> > > CPU:
> > > > Unsupported number of siblings 32 installing Xen timer
> for
> > CPU 6
> > > > Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache:
> 32K
> > CPU: L2
> > > cache:
> > > > 256K CPU: L3 cache: 12288K CPU 6/0x0 -> Node 0 CPU:
> > Unsupported
> > > number
> > > > of siblings 32 installing Xen timer for CPU 7
> Initializing
> > CPU#7
> > > CPU: L1
> > > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU:
> L3
> > cache:
> > > 12288K
> > > > CPU 7/0x0 -> Node 0 CPU: Unsupported number of
> siblings 32
> > > installing
> > > > Xen timer for CPU 8 Initializing CPU#8 CPU: L1 I
> cache:
> > 32K, L1 D
> > > cache:
> > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU
> 8/0x0 ->
> > Node 0
> > > CPU:
> > > > Unsupported number of siblings 32 installing Xen timer
> for
> > CPU 9
> > > > Initializing CPU#9 CPU: L1 I cache: 32K, L1 D cache:
> 32K
> > CPU: L2
> > > cache:
> > > > 256K CPU: L3 cache: 12288K CPU 9/0x0 -> Node 0 CPU:
> > Unsupported
> > > number
> > > > of siblings 32 installing Xen timer for CPU 10
> > Initializing
> > > CPU#10 CPU:
> > > > L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K
> CPU:
> > L3
> > > cache:
> > > > 12288K CPU 10/0x0 -> Node 0 CPU: Unsupported number of
> > siblings
> > > 32
> > > > installing Xen timer for CPU 11 Initializing CPU#11
> CPU:
> > L1 I
> > > cache:
> > > > 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3
> cache:
> > 12288K
> > > CPU
> > > > 11/0x0 -> Node 0 CPU: Unsupported number of siblings
> 32
> > Brought
> > > up 12
> > > > CPUs Grant table initialized regulator: core version
> 0.5
> > Time:
> > > 14:45:00
> > > > Date: 03/16/10 NET: Registered protocol family 16
> > > xenbus_probe_init ok
> > > > ACPI FADT declares the system doesn't support PCIe
> ASPM,
> > so
> > > disable it
> > > > ACPI: bus type pci registered PCI: MCFG configuration
> 0:
> > base
> > > a0000000
> > > > segment 0 buses 0 - 255 PCI: MCFG area at a0000000
> > reserved in
> > > E820 PCI:
> > > > Using MMCONFIG at a0000000 - afffffff PCI: Using
> > configuration
> > > type 1
> > > > for base access bio: create slab <bio-0> at 0 ACPI
> Error:
> > Field
> > > [CPB3]
> > > > at 96 exceeds Buffer [NULL] size 64 (bits)
> > > (20090903/dsopcode-596) ACPI
> > > > Error (psparse-0537): Method parse/execution failed
> > [\_SB_._OSC]
> > > (Node
> > > > ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI:
> Interpreter
> > enabled
> > > ACPI:
> > > > (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for
> interrupt
> > > routing ACPI
> > > > Warning: Incorrect checksum in table [ ] - 97,
> should
> > be DB
> > > > (20090903/tbutils-314) ACPI: No dock devices found.
> ACPI:
> > PCI
> > > Root
> > > > Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME#
> supported
> > from D0
> > > D3hot
> > > > D3cold pci 0000:00:01.0: PME# disabled pci
> 0000:00:02.0:
> > PME#
> > > supported
> > > > from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled
> pci
> > > 0000:00:03.0:
> > > > PME# supported from D0 D3hot D3cold pci 0000:00:03.0:
> PME#
> > > disabled pci
> > > > 0000:00:04.0: PME# supported from D0 D3hot D3cold pci
> > > 0000:00:04.0: PME#
> > > > disabled pci 0000:00:05.0: PME# supported from D0
> D3hot
> > D3cold
> > > pci
> > > > 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME#
> > supported from
> > > D0
> > > > D3hot D3cold pci 0000:00:06.0: PME# disabled pci
> > 0000:00:07.0:
> > > PME#
> > > > supported from D0 D3hot D3cold pci 0000:00:07.0: PME#
> > disabled
> > > pci
> > > > 0000:00:08.0: PME# supported from D0 D3hot D3cold pci
> > > 0000:00:08.0: PME#
> > > > disabled pci 0000:00:09.0: PME# supported from D0
> D3hot
> > D3cold
> > > pci
> > > > 0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME#
> > supported from
> > > D0
> > > > D3hot D3cold pci 0000:00:0a.0: PME# disabled pci
> > 0000:00:13.0:
> > > PME#
> > > > supported from D0 D3hot D3cold pci 0000:00:13.0: PME#
> > disabled
> > > pci
> > > > 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci
> > > 0000:00:1a.7: PME#
> > > > disabled pci 0000:00:1c.0: PME# supported from D0
> D3hot
> > D3cold
> > > pci
> > > > 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME#
> > supported from
> > > D0
> > > > D3hot D3cold pci 0000:00:1c.4: PME# disabled pci
> > 0000:00:1c.5:
> > > PME#
> > > > supported from D0 D3hot D3cold pci 0000:00:1c.5: PME#
> > disabled
> > > pci
> > > > 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci
> > > 0000:00:1d.7: PME#
> > > > disabled pci 0000:00:1f.0: quirk: region 0400-047f
> claimed
> > by
> > > ICH6
> > > > ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region
> 0500-053f
> > claimed
> > > by ICH6
> > > > GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1
> PIO at
> > 0680
> > > (mask
> > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2
> PIO
> > at 0ca0
> > > (mask
> > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3
> PIO
> > at 0600
> > > (mask
> > > > 001f) pci 0000:00:1f.2: PME# supported from D3hot pci
> > > 0000:00:1f.2: PME#
> > > > disabled pci 0000:01:00.0: PME# supported from D0
> D3hot
> > D3cold
> > > pci
> > > > 0000:01:00.0: PME# disabled pci 0000:01:00.1: PME#
> > supported from
> > > D0
> > > > D3hot D3cold pci 0000:01:00.1: PME# disabled pci
> > 0000:0c:00.0:
> > > disabling
> > > > ASPM on pre-1.1 PCIe device. You can enable it with
> > > 'pcie_aspm=force'
> > > > pci 0000:00:1e.0: transparent bridge ACPI: PCI Root
> Bridge
> > [PCI1]
> > > > (0000:fe) ACPI: PCI Root Bridge [PCI2] (0000:ff) ACPI:
> PCI
> > > Interrupt
> > > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI:
> PCI
> > > Interrupt Link
> > > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI
> > Interrupt
> > > Link
> > > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI
> > Interrupt
> > > Link
> > > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI
> > Interrupt
> > > Link
> > > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
> > ACPI: PCI
> > > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14
> 15)
> > ACPI:
> > > PCI
> > > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14
> 15)
> > *0,
> > > disabled.
> > > > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10
> 11
> > 12 14
> > > 15)
> > > > xenbus_probe_backend_init bus registered ok
> > > xenbus_probe_frontend_init
> > > > bus registered ok xen_balloon: Initialising balloon
> driver
> > with
> > > page
> > > > order 0. vgaarb: device added:
> > > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none
> > vgaarb:
> > > loaded
> > > > SCSI subsystem initialized usbcore: registered new
> > interface
> > > driver
> > > > usbfs usbcore: registered new interface driver hub
> > usbcore:
> > > registered
> > > > new device driver usb PCI: Using ACPI for IRQ routing
> > NetLabel:
> > > > Initializing NetLabel: domain hash size = 128
> NetLabel:
> > > protocols =
> > > > UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed
> by
> > default
> > > > Switching to clocksource xen kstop/0 used greatest
> stack
> > depth:
> > > 6568
> > > > bytes left kstop/1 used greatest stack depth: 6536
> bytes
> > left
> > > pnp: PnP
> > > > ACPI init ACPI: bus type pnp registered
> xen_allocate_pirq:
> > > returning irq
> > > > 8 for gsi 8 Already setup the GSI :8
> xen_allocate_pirq:
> > returning
> > > irq 13
> > > > for gsi 13 Already setup the GSI :13 pnp: PnP ACPI:
> found
> > 13
> > > devices
> > > > ACPI: ACPI bus type pnp unregistered system 00:07:
> ioport
> > range
> > > > 0x500-0x53f has been reserved system 00:07: ioport
> range
> > > 0x400-0x47f has
> > > > been reserved system 00:07: ioport range 0x800-0x81f
> has
> > been
> > > reserved
> > > > system 00:07: ioport range 0x2f8-0x2ff has been
> reserved
> > system
> > > 00:07:
> > > > iomem range 0xfed1c000-0xfed8bffe could not be
> reserved
> > system
> > > 00:07:
> > > > iomem range 0xff000000-0xffffffff could not be
> reserved
> > system
> > > 00:07:
> > > > iomem range 0xfee00000-0xfeefffff has been reserved
> system
> > 00:07:
> > > iomem
> > > > range 0xfe900000-0xfe90001f has been reserved system
> > 00:07: iomem
> > > range
> > > > 0xfea00000-0xfea0001f has been reserved system 00:07:
> > iomem range
> > > > 0xfed1b000-0xfed1bfff has been reserved pci
> 0000:0c:00.0:
> > BAR 6:
> > > no
> > > > parent found for of device [0xffff0000-0xffffffff] pci
> > > 0000:00:01.0: PCI
> > > > bridge, secondary bus 0000:01 pci 0000:00:01.0: IO
> > window:
> > > > 0x1000-0x1fff pci 0000:00:01.0: MEM window:
> > > 0xb1900000-0xb19fffff pci
> > > > 0000:00:01.0: PREFETCH window: disabled pci
> > 0000:00:02.0: PCI
> > > bridge,
> > > > secondary bus 0000:02 pci 0000:00:02.0: IO window:
> > disabled pci
> > > > 0000:00:02.0: MEM window: disabled pci 0000:00:02.0:
> > PREFETCH
> > > > window: disabled pci 0000:00:03.0: PCI bridge,
> secondary
> > bus
> > > 0000:03 pci
> > > > 0000:00:03.0: IO window: disabled pci 0000:00:03.0:
> > MEM
> > > window:
> > > > disabled pci 0000:00:03.0: PREFETCH window: disabled
> pci
> > > 0000:00:04.0:
> > > > PCI bridge, secondary bus 0000:04 pci 0000:00:04.0:
> IO
> > window:
> > > > disabled pci 0000:00:04.0: MEM window: disabled pci
> > > 0000:00:04.0:
> > > > PREFETCH window: disabled pci 0000:00:05.0: PCI
> bridge,
> > secondary
> > > bus
> > > > 0000:05 pci 0000:00:05.0: IO window: disabled pci
> > 0000:00:05.0:
> > > MEM
> > > > window: disabled pci 0000:00:05.0: PREFETCH window:
> > disabled
> > > pci
> > > > 0000:00:06.0: PCI bridge, secondary bus 0000:06 pci
> > 0000:00:06.0:
> > > IO
> > > > window: disabled pci 0000:00:06.0: MEM window:
> disabled
> > pci
> > > > 0000:00:06.0: PREFETCH window: disabled pci
> > 0000:00:07.0: PCI
> > > bridge,
> > > > secondary bus 0000:07 pci 0000:00:07.0: IO window:
> > disabled pci
> > > > 0000:00:07.0: MEM window: disabled pci 0000:00:07.0:
> > PREFETCH
> > > > window: disabled pci 0000:00:08.0: PCI bridge,
> secondary
> > bus
> > > 0000:08 pci
> > > > 0000:00:08.0: IO window: disabled pci 0000:00:08.0:
> > MEM
> > > window:
> > > > disabled pci 0000:00:08.0: PREFETCH window: disabled
> pci
> > > 0000:00:09.0:
> > > > PCI bridge, secondary bus 0000:09 pci 0000:00:09.0:
> IO
> > window:
> > > > 0x3000-0x3fff pci 0000:00:09.0: MEM window:
> > > 0xb1b00000-0xb1cfffff pci
> > > > 0000:00:09.0: PREFETCH window:
> > > 0x000000b1d00000-0x000000b1efffff pci
> > > > 0000:00:0a.0: PCI bridge, secondary bus 0000:0a pci
> > 0000:00:0a.0:
> > > IO
> > > > window: disabled pci 0000:00:0a.0: MEM window:
> disabled
> > pci
> > > > 0000:00:0a.0: PREFETCH window: disabled pci
> > 0000:00:1c.0: PCI
> > > bridge,
> > > > secondary bus 0000:0b pci 0000:00:1c.0: IO window:
> > disabled pci
> > > > 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0:
> > PREFETCH
> > > > window: disabled pci 0000:00:1c.4: PCI bridge,
> secondary
> > bus
> > > 0000:0c pci
> > > > 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4:
> > MEM
> > > window:
> > > > 0xb1000000-0xb18fffff pci 0000:00:1c.4: PREFETCH
> window:
> > > > 0x000000b0000000-0x000000b0ffffff pci 0000:00:1c.5:
> PCI
> > bridge,
> > > > secondary bus 0000:0d pci 0000:00:1c.5: IO window:
> > disabled pci
> > > > 0000:00:1c.5: MEM window: disabled pci 0000:00:1c.5:
> > PREFETCH
> > > > window: disabled pci 0000:00:1e.0: PCI bridge,
> secondary
> > bus
> > > 0000:0e pci
> > > > 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0:
> > MEM
> > > window:
> > > > disabled pci 0000:00:1e.0: PREFETCH window: disabled
> pci
> > > 0000:00:01.0:
> > > > PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci
> > 0000:00:02.0: PCI
> > > INT A
> > > > -> GSI 29 (level, low) -> IRQ 29 pci 0000:00:03.0: PCI
> INT
> > A ->
> > > GSI 24
> > > > (level, low) -> IRQ 24 pci 0000:00:04.0: PCI INT A ->
> GSI
> > 25
> > > (level,
> > > > low) -> IRQ 25 pci 0000:00:05.0: PCI INT A -> GSI 26
> > (level, low)
> > > -> IRQ
> > > > 26 pci 0000:00:06.0: PCI INT A -> GSI 27 (level, low)
> ->
> > IRQ 27
> > > pci
> > > > 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ
> 30
> > pci
> > > > 0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ
> 31
> > pci
> > > > 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ
> 32
> > pci
> > > > 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ
> 33
> > pci
> > > > 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ
> 16
> > > > xen_allocate_pirq: returning irq 16 for gsi 16 Already
> > setup the
> > > GSI :16
> > > > pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) ->
> IRQ
> > 16 pci
> > > > 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ
> 17
> > NET:
> > > Registered
> > > > protocol family 2 IP route cache hash table entries:
> 65536
> > > (order: 7,
> > > > 524288 bytes) TCP established hash table entries:
> 262144
> > (order:
> > > 10,
> > > > 4194304 bytes) TCP bind hash table entries: 65536
> (order:
> > 10,
> > > 4718592
> > > > bytes) TCP: Hash tables configured (established 262144
> > bind
> > > 65536) TCP
> > > > reno registered NET: Registered protocol family 1 pci
> > > 0000:01:00.0:
> > > > Disabling L0s pci 0000:01:00.1: Disabling L0s Trying
> to
> > unpack
> > > rootfs
> > > > image as initramfs... Freeing initrd memory: 6474k
> freed
> > DMA-API:
> > > > preallocated 32768 debug entries DMA-API: debugging
> > enabled by
> > > kernel
> > > > config PCI-DMA: Using software bounce buffering for IO
> > (SWIOTLB)
> > > DMA:
> > > > Placing 64MB software IO TLB between ffff880007525000
> -
> > > ffff88000b525000
> > > > DMA: software IO TLB at phys 0x7525000 - 0xb525000
> audit:
> > > initializing
> > > > netlink socket (disabled) type=2000
> > audit(1268750702.035:1):
> > > initialized
> > > > HugeTLB registered 2 MB page size, pre-allocated 0
> pages
> > VFS:
> > > Disk
> > > > quotas dquot_6.5.2 Dquot-cache hash table entries: 512
> > (order 0,
> > > 4096
> > > > bytes) msgmni has been set to 2970 cryptomgr_test used
> > greatest
> > > stack
> > > > depth: 5864 bytes left cryptomgr_test used greatest
> stack
> > depth:
> > > 5816
> > > > bytes left alg: No test for stdrng (krng) Block layer
> SCSI
> > > generic (bsg)
> > > > driver version 0.4 loaded (major 252) io scheduler
> noop
> > > registered io
> > > > scheduler anticipatory registered io scheduler
> deadline
> > > registered io
> > > > scheduler cfq registered (default) pci_hotplug: PCI
> Hot
> > Plug PCI
> > > Core
> > > > version: 0.5 pciehp 0000:00:09.0:pcie04: HPC vendor_id
> > 8086
> > > device_id
> > > > 3410 ss_vid 0 ss_did 0 pciehp: PCI Express Hot Plug
> > Controller
> > > Driver
> > > > version: 0.4 acpiphp: ACPI Hot Plug PCI Controller
> Driver
> > > version: 0.5
> > > > acpiphp_glue: Slot 2 already registered by another
> hotplug
> > driver
> > > > acpiphp_glue: Slot 2 already registered by another
> hotplug
> > driver
> > > > acpiphp_glue: Slot 2 already registered by another
> hotplug
> > driver
> > > > acpiphp_glue: Slot 2 already registered by another
> hotplug
> > driver
> > > > acpiphp_glue: Slot 2 already registered by another
> hotplug
> > driver
> > > > acpiphp_glue: Slot 2 already registered by another
> hotplug
> > driver
> > > > acpiphp_glue: Slot 2 already registered by another
> hotplug
> > driver
> > > > acpiphp_glue: Slot 2 already registered by another
> hotplug
> > driver
> > > > pci-stub: invalid id string "" input: Sleep Button as
> > > >
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
> > ACPI:
> > > Sleep
> > > > Button [SLPB] input: Power Button as
> > > > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI:
> Power
> > Button
> > > [PWRF]
> > > > registering netback hpet_acpi_add: no address or irqs
> in
> > _CRS
> > > > Non-volatile memory driver v1.3 Linux agpgart
> interface
> > v0.103
> > > Serial:
> > > > 8250/16550 driver, 4 ports, IRQ sharing enabled
> > serial8250: ttyS1
> > > at I/O
> > > > 0x2f8 (irq = 3) is a 16550A brd: module loaded loop:
> > module
> > > loaded
> > > > input: Macintosh mouse button emulation as
> > > /devices/virtual/input/input2
> > > > ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) ->
> IRQ
> > 19
> > > ahci
> > > > 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps
> 0x3f
> > impl
> > > SATA mode
> > > > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo
> pio
> > slum part
> > > ccc
> > > > ems scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 :
> ahci
> > scsi4 :
> > > ahci
> > > > scsi5 : ahci ata1: SATA max UDMA/133 irq_stat
> 0x00400040,
> > > connection
> > > > status changed irq 2996 ata2: SATA max UDMA/133 abar
> > > m2048@0xb1a00000
> > > > port 0xb1a00180 irq 2996 ata3: SATA max UDMA/133 abar
> > > m2048@0xb1a00000
> > > > port 0xb1a00200 irq 2996 ata4: SATA max UDMA/133 abar
> > > m2048@0xb1a00000
> > > > port 0xb1a00280 irq 2996 ata5: SATA max UDMA/133 abar
> > > m2048@0xb1a00000
> > > > port 0xb1a00300 irq 2996 ata6: SATA max UDMA/133 abar
> > > m2048@0xb1a00000
> > > > port 0xb1a00380 irq 2996 Fixed MDIO Bus: probed
> ehci_hcd:
> > USB 2.0
> > > > 'Enhanced' Host Controller (EHCI) Driver ehci_hcd
> > 0000:00:1a.7:
> > > PCI INT
> > > > C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd
> 0000:00:1a.7:
> > EHCI
> > > Host
> > > > Controller ehci_hcd 0000:00:1a.7: new USB bus
> registered,
> > > assigned bus
> > > > number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd
> > > 0000:00:1a.7: irq
> > > > 18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7: USB 2.0
> > started,
> > > EHCI 1.00
> > > > usb usb1: New USB device found, idVendor=1d6b,
> > idProduct=0002 usb
> > > usb1:
> > > > New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> > usb
> > > usb1:
> > > > Product: EHCI Host Controller usb usb1: Manufacturer:
> > Linux
> > > 2.6.32.9
> > > > ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb
> usb1:
> > > configuration #1
> > > > chosen from 1 choice hub 1-0:1.0: USB hub found hub
> > 1-0:1.0: 6
> > > ports
> > > > detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23
> > (level, low)
> > > -> IRQ
> > > > 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller
> ehci_hcd
> > > 0000:00:1d.7:
> > > > new USB bus registered, assigned bus number 2 ehci_hcd
> > > 0000:00:1d.7:
> > > > debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem
> > 0xb1a01000
> > > ehci_hcd
> > > > 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New
> USB
> > device
> > > found,
> > > > idVendor=1d6b, idProduct=0002 usb usb2: New USB device
> > strings:
> > > Mfr=3,
> > > > Product=2, SerialNumber=1 usb usb2: Product: EHCI Host
> > Controller
> > > usb
> > > > usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd usb usb2:
> > > SerialNumber:
> > > > 0000:00:1d.7 usb usb2: configuration #1 chosen from 1
> > choice hub
> > > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected
> > ohci_hcd:
> > > USB 1.1
> > > > 'Open' Host Controller (OHCI) Driver uhci_hcd: USB
> > Universal Host
> > > > Controller Interface driver xen_allocate_pirq:
> returning
> > irq 16
> > > for gsi
> > > > 16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0:
> PCI
> > INT A ->
> > > GSI 16
> > > > (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: UHCI
> Host
> > > Controller
> > > > uhci_hcd 0000:00:1a.0: new USB bus registered,
> assigned
> > bus
> > > number 3
> > > > uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020e0 usb
> > usb3: New
> > > USB
> > > > device found, idVendor=1d6b, idProduct=0001 usb usb3:
> New
> > USB
> > > device
> > > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb3:
> > Product: UHCI
> > > Host
> > > > Controller usb usb3: Manufacturer: Linux 2.6.32.9
> uhci_hcd
> > usb
> > > usb3:
> > > > SerialNumber: 0000:00:1a.0 usb usb3: configuration #1
> > chosen from
> > > 1
> > > > choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports
> > detected
> > > uhci_hcd
> > > > 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ
> 21
> > uhci_hcd
> > > > 0000:00:1a.1: UHCI Host Controller uhci_hcd
> 0000:00:1a.1:
> > new USB
> > > bus
> > > > registered, assigned bus number 4 uhci_hcd
> 0000:00:1a.1:
> > irq 21,
> > > io base
> > > > 0x000020c0 usb usb4: New USB device found,
> idVendor=1d6b,
> > > idProduct=0001
> > > > usb usb4: New USB device strings: Mfr=3, Product=2,
> > > SerialNumber=1 usb
> > > > usb4: Product: UHCI Host Controller usb usb4:
> > Manufacturer: Linux
> > > > 2.6.32.9 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1
> usb
> > usb4:
> > > > configuration #1 chosen from 1 choice hub 4-0:1.0: USB
> hub
> > found
> > > hub
> > > > 4-0:1.0: 2 ports detected xen_allocate_pirq: returning
> irq
> > 19 for
> > > gsi 19
> > > > Already setup the GSI :19 uhci_hcd 0000:00:1a.2: PCI
> INT D
> > -> GSI
> > > 19
> > > > (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: UHCI
> Host
> > > Controller
> > > > uhci_hcd 0000:00:1a.2: new USB bus registered,
> assigned
> > bus
> > > number 5
> > > > uhci_hcd 0000:00:1a.2: irq 19, io base 0x000020a0 usb
> > usb5: New
> > > USB
> > > > device found, idVendor=1d6b, idProduct=0001 usb usb5:
> New
> > USB
> > > device
> > > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb5:
> > Product: UHCI
> > > Host
> > > > Controller usb usb5: Manufacturer: Linux 2.6.32.9
> uhci_hcd
> > usb
> > > usb5:
> > > > SerialNumber: 0000:00:1a.2 usb usb5: configuration #1
> > chosen from
> > > 1
> > > > choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports
> > detected
> > > > xen_allocate_pirq: returning irq 23 for gsi 23 Already
> > setup the
> > > GSI :23
> > > > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level,
> low) ->
> > IRQ 23
> > > > uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd
> > > 0000:00:1d.0: new
> > > > USB bus registered, assigned bus number 6 uhci_hcd
> > 0000:00:1d.0:
> > > irq 23,
> > > > io base 0x00002080 usb usb6: New USB device found,
> > idVendor=1d6b,
> > > > idProduct=0001 usb usb6: New USB device strings:
> Mfr=3,
> > > Product=2,
> > > > SerialNumber=1 usb usb6: Product: UHCI Host Controller
> usb
> > usb6:
> > > > Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb6:
> > SerialNumber:
> > > > 0000:00:1d.0 usb usb6: configuration #1 chosen from 1
> > choice hub
> > > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected
> > > xen_allocate_pirq:
> > > > returning irq 19 for gsi 19 Already setup the GSI :19
> > uhci_hcd
> > > > 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ
> 19
> > uhci_hcd
> > > > 0000:00:1d.1: UHCI Host Controller uhci_hcd
> 0000:00:1d.1:
> > new USB
> > > bus
> > > > registered, assigned bus number 7 uhci_hcd
> 0000:00:1d.1:
> > irq 19,
> > > io base
> > > > 0x00002060 usb usb7: New USB device found,
> idVendor=1d6b,
> > > idProduct=0001
> > > > usb usb7: New USB device strings: Mfr=3, Product=2,
> > > SerialNumber=1 usb
> > > > usb7: Product: UHCI Host Controller usb usb7:
> > Manufacturer: Linux
> > > > 2.6.32.9 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1
> usb
> > usb7:
> > > > configuration #1 chosen from 1 choice hub 7-0:1.0: USB
> hub
> > found
> > > hub
> > > > 7-0:1.0: 2 ports detected xen_allocate_pirq: returning
> irq
> > 18 for
> > > gsi 18
> > > > Already setup the GSI :18 uhci_hcd 0000:00:1d.2: PCI
> INT C
> > -> GSI
> > > 18
> > > > (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI
> Host
> > > Controller
> > > > uhci_hcd 0000:00:1d.2: new USB bus registered,
> assigned
> > bus
> > > number 8
> > > > uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb
> > usb8: New
> > > USB
> > > > device found, idVendor=1d6b, idProduct=0001 usb usb8:
> New
> > USB
> > > device
> > > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb8:
> > Product: UHCI
> > > Host
> >
[-- Attachment #1.2: Type: text/html, Size: 93196 bytes --]
[-- Attachment #2: Type: text/plain, Size: 137 bytes --]
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
next prev parent reply other threads:[~2010-03-18 18:16 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <9f975f341003121546m7042e458i67822a037076b828@mail.gmail.com>
[not found] ` <20100313001842.GO1878@reaktio.net>
[not found] ` <9f975f341003121641m17e7398cnd2398a3f50a1c78a@mail.gmail.com>
[not found] ` <20100313004730.GR1878@reaktio.net>
[not found] ` <9f975f341003151701u4e8da890ve2c11f5e66a44a93@mail.gmail.com>
[not found] ` <9f975f341003161032p423b5c7cs5bc9bcfb36620033@mail.gmail.com>
[not found] ` <20100316194344.GW1878@reaktio.net>
2010-03-16 19:48 ` pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 Pasi Kärkkäinen
2010-03-16 20:16 ` [Xen-devel] " Jeremy Fitzhardinge
2010-03-16 20:20 ` Re: [Xen-users] " Pasi Kärkkäinen
2010-03-16 21:16 ` [Xen-devel] " kishore kumar
2010-03-16 21:29 ` Re: [Xen-users] " Pasi Kärkkäinen
2010-03-16 21:56 ` [SPAM] Re: [Xen-devel] " kishore kumar
2010-03-16 22:03 ` Pasi Kärkkäinen
2010-03-16 22:22 ` kishore kumar
2010-03-16 22:29 ` Re: [Xen-users] " Pasi Kärkkäinen
2010-03-16 22:40 ` [Xen-devel] " kishore kumar
2010-03-16 23:18 ` Pasi Kärkkäinen
2010-03-17 22:20 ` kishore kumar
2010-03-18 0:34 ` kishore kumar
2010-03-18 16:15 ` Pasi Kärkkäinen
2010-03-18 18:16 ` kishore kumar [this message]
2010-03-18 19:31 ` Pasi Kärkkäinen
2010-03-18 20:23 ` kishore kumar
2010-03-18 21:27 ` Pasi Kärkkäinen
2010-03-18 23:56 ` kishore kumar
2010-03-19 17:59 ` [Xen-devel] Re: pvops dom0 kernel: crash in print_all_ICs() Pasi Kärkkäinen
2010-03-19 18:22 ` Re: [Xen-users] " Jeremy Fitzhardinge
2010-03-19 19:05 ` Pasi Kärkkäinen
2010-03-19 19:57 ` [Xen-devel] " kishore kumar
2010-03-19 20:03 ` Pasi Kärkkäinen
2010-03-22 20:23 ` kishore kumar
2010-03-22 20:31 ` Pasi Kärkkäinen
2010-03-22 21:48 ` kishore kumar
2010-03-23 7:04 ` Re: [Xen-users] " Pasi Kärkkäinen
2010-03-19 20:07 ` Konrad Rzeszutek Wilk
2010-03-19 20:45 ` [Xen-devel] " Pasi Kärkkäinen
2010-03-23 15:23 ` Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 Tobias Geiger
2010-03-23 17:00 ` Jeremy Fitzhardinge
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9f975f341003181116w3501badar59252aba40adae40@mail.gmail.com \
--to=bodkekumar@gmail.com \
--cc=jeremy@goop.org \
--cc=pasik@iki.fi \
--cc=xen-devel@lists.xensource.com \
--cc=xen-users@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).