* Re: pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 [not found] ` <20100316194344.GW1878@reaktio.net> @ 2010-03-16 19:48 ` Pasi Kärkkäinen 2010-03-16 20:16 ` [Xen-devel] " Jeremy Fitzhardinge 0 siblings, 1 reply; 32+ messages in thread From: Pasi Kärkkäinen @ 2010-03-16 19:48 UTC (permalink / raw) To: kishore kumar; +Cc: xen-devel, xen-users On Tue, Mar 16, 2010 at 09:43:44PM +0200, Pasi Kärkkäinen wrote: > On Tue, Mar 16, 2010 at 10:32:17AM -0700, kishore kumar wrote: > > Attached is the output captured from serial console. > > > > Machine does not boot after compiling xen 3.4.3 with pv_ops dom 0 kernel. > > > > Please let me know what is going wrong here. > > > > Ok this looks like a bug that is already being sorted out on xen-devel mailinglist. > I added CC to xen-devel. > Now added the CC for real :) -- Pasi > > > Thanks > > > > > Asserting Post complete GPIO!!! > > Transfer control to CSM 16-bit binary for legacy boot > > __ __ _____ _ _ _____ _ _ > > \ \/ /___ _ __ |___ /| || | |___ / _ __ ___| || | _ __ _ __ ___ > > \ // _ \ '_ \ |_ \| || |_ |_ \ __| '__/ __| || |_ __| '_ \| '__/ _ \ > > / \ __/ | | | ___) |__ _| ___) |__| | | (__|__ _|__| |_) | | | __/ > > /_/\_\___|_| |_| |____(_) |_|(_)____/ |_| \___| |_| | .__/|_| \___| > > |_| > > (XEN) Xen version 3.4.3-rc4-pre (kishore@localdomain) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar 15 13:44:31 PDT 2010 > > (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 2010 +0000 19924:6e72f8c3c017 > > (XEN) Command line: console=vga,com1 com1=115200,8n1 msi=1 iommu=1 > > (XEN) Video information: > > (XEN) VGA is text mode 80x25, font 8x16 > > (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds > > (XEN) EDID info not retrieved because no DDC retrieval method detected > > (XEN) Disc information: > > (XEN) Found 1 MBR signatures > > (XEN) Found 1 EDD information structures > > (XEN) Xen-e820 RAM map: > > (XEN) 0000000000000000 - 000000000009d000 (usable) > > (XEN) 000000000009d000 - 00000000000a0000 (reserved) > > (XEN) 00000000000e0000 - 0000000000100000 (reserved) > > (XEN) 0000000000100000 - 000000006d597000 (usable) > > (XEN) 000000006d597000 - 000000006d686000 (reserved) > > (XEN) 000000006d686000 - 000000006f598000 (usable) > > (XEN) 000000006f598000 - 000000006f59a000 (reserved) > > (XEN) 000000006f59a000 - 000000006f5af000 (ACPI NVS) > > (XEN) 000000006f5af000 - 000000006f5d9000 (reserved) > > (XEN) 000000006f5d9000 - 000000006f5f9000 (ACPI data) > > (XEN) 000000006f5f9000 - 000000006f6df000 (ACPI NVS) > > (XEN) 000000006f6df000 - 000000006f700000 (ACPI data) > > (XEN) 000000006f700000 - 0000000080000000 (reserved) > > (XEN) 00000000a0000000 - 00000000b0000000 (reserved) > > (XEN) 00000000fc000000 - 00000000fd000000 (reserved) > > (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) > > (XEN) 00000000ffc00000 - 0000000100000000 (reserved) > > (XEN) System RAM: 1780MB (1823000kB) > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL ) > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL THRLY 0 1000013) > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL THRLY 0 MSFT 100000D) > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL THRLY 3 MSFT 100000D) > > (XEN) ACPI: FACS 6F5F9000, 0040 > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL THRLY 0 MSFT 100000D) > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL THRLY 1 MSFT 100000D) > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL THRLY 1 MSFT 100000D) > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL THRLY 1 MSFT 100000D) > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL THRLY 0 MSFT 100000D) > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 INTEL SSDT PM 4000 INTL 20061109) > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL THRLY 1 MSFT 100000D) > > (XEN) Domain heap initialised > > (XEN) Processor #0 6:12 APIC version 21 > > (XEN) Processor #2 6:12 APIC version 21 > > (XEN) Processor #4 6:12 APIC version 21 > > (XEN) Processor #16 6:12 APIC version 21 > > (XEN) Processor #18 6:12 APIC version 21 > > (XEN) Processor #20 6:12 APIC version 21 > > (XEN) Processor #1 6:12 APIC version 21 > > (XEN) Processor #3 6:12 APIC version 21 > > (XEN) Processor #5 6:12 APIC version 21 > > (XEN) Processor #17 6:12 APIC version 21 > > (XEN) Processor #19 6:12 APIC version 21 > > (XEN) Processor #21 6:12 APIC version 21 > > (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > > (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec90000, GSI 24-47 > > (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs > > (XEN) Intel VT-d DMAR tables have been parsed. > > (XEN) Using scheduler: SMP Credit Scheduler (credit) > > (XEN) Detected 3200.163 MHz processor. > > (XEN) VMX: Supported advanced features: > > (XEN) - APIC MMIO access virtualisation > > (XEN) - APIC TPR shadow > > (XEN) - Extended Page Tables (EPT) > > (XEN) - Virtual-Processor Identifiers (VPID) > > (XEN) - Virtual NMI > > (XEN) - MSR direct-access bitmap > > (XEN) VMX: EPT is available. > > (XEN) VMX: VPID is available. > > (XEN) HVM: VMX enabled > > (XEN) HVM: Hardware Assisted Paging detected. > > (XEN) CPU0: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > > (XEN) Booting processor 1/2 eip 88000 > > (XEN) CPU1: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > > (XEN) Booting processor 2/4 eip 88000 > > (XEN) CPU2: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > > (XEN) Booting processor 3/16 eip 88000 > > (XEN) CPU3: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > > (XEN) Booting processor 4/18 eip 88000 > > (XEN) CPU4: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > > (XEN) Booting processor 5/20 eip 88000 > > (XEN) CPU5: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > > (XEN) Booting processor 6/1 eip 88000 > > (XEN) CPU6: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > > (XEN) Booting processor 7/3 eip 88000 > > (XEN) CPU7: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > > (XEN) Booting processor 8/5 eip 88000 > > (XEN) CPU8: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > > (XEN) Booting processor 9/17 eip 88000 > > (XEN) CPU9: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > > (XEN) Booting processor 10/19 eip 88000 > > (XEN) CPU10: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > > (XEN) Booting processor 11/21 eip 88000 > > (XEN) CPU11: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > > (XEN) Total of 12 processors activated. > > (XEN) ENABLING IO-APIC IRQs > > (XEN) -> Using new ACK method > > (XEN) checking TSC synchronization across 12 CPUs: passed. > > (XEN) Platform timer is 14.318MHz HPET > > ?(XEN) Brought up 12 CPUs > > (XEN) Intel VT-d Snoop Control supported. > > (XEN) Intel VT-d DMA Passthrough not supported. > > (XEN) Intel VT-d Queued Invalidation supported. > > (XEN) Intel VT-d Interrupt Remapping supported. > > (XEN) I/O virtualisation enabled > > (XEN) I/O virtualisation for PV guests disabled > > (XEN) xenoprof: Initialization failed. Intel processor model 44 for P6 class family is not supported > > (XEN) *** LOADING DOMAIN 0 *** > > (XEN) Xen kernel: 64-bit, lsb, compat32 > > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x26bb000 > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > (XEN) Dom0 alloc.: 0000000064000000->0000000068000000 (404490 pages to be allocated) > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > (XEN) Loaded kernel: ffffffff81000000->ffffffff826bb000 > > (XEN) Init. ramdisk: ffffffff826bb000->ffffffff82d0d800 > > (XEN) Phys-Mach map: ffffffff82d0e000->ffffffff83044050 > > (XEN) Start info: ffffffff83045000->ffffffff830454b4 > > (XEN) Page tables: ffffffff83046000->ffffffff83063000 > > (XEN) Boot stack: ffffffff83063000->ffffffff83064000 > > (XEN) TOTAL: ffffffff80000000->ffffffff83400000 > > (XEN) ENTRY ADDRESS: ffffffff819c1200 > > (XEN) Dom0 has maximum 12 VCPUs > > (XEN) Scrubbing Free RAM: .done. > > (XEN) Xen trace buffers: disabled > > (XEN) Std. Loglevel: Errors and warnings > > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) > > (XEN) Xen is relinquishing VGA console. > > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) > > (XEN) Freed 128kB init memory. > > mapping kernel into physical memory > > Xen: setup ISA identity maps > > about to get started... > > Initializing cgroup subsys cpuset > > Initializing cgroup subsys cpu > > Linux version 2.6.32.9 (kishore@localhost.localdomain) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 15 15:16:28 PDT 2010 > > Command line: ro root=/dev/VolGroup01/LogVol00 earlyprintk=xen nomodeset rhgb quiet > > KERNEL supported cpus: > > Intel GenuineIntel > > AMD AuthenticAMD > > Centaur CentaurHauls > > BIOS-provided physical RAM map: > > Xen: 0000000000000000 - 000000000009d000 (usable) > > Xen: 000000000009d000 - 0000000000100000 (reserved) > > Xen: 0000000000100000 - 0000000066c0a000 (usable) > > Xen: 000000006d597000 - 000000006d686000 (reserved) > > Xen: 000000006f598000 - 000000006f59a000 (reserved) > > Xen: 000000006f59a000 - 000000006f5af000 (ACPI NVS) > > Xen: 000000006f5af000 - 000000006f5d9000 (reserved) > > Xen: 000000006f5d9000 - 000000006f5f9000 (ACPI data) > > Xen: 000000006f5f9000 - 000000006f6df000 (ACPI NVS) > > Xen: 000000006f6df000 - 000000006f700000 (ACPI data) > > Xen: 000000006f700000 - 0000000080000000 (reserved) > > Xen: 00000000a0000000 - 00000000b0000000 (reserved) > > Xen: 00000000fc000000 - 00000000fd000000 (reserved) > > Xen: 00000000fed1c000 - 00000000fed20000 (reserved) > > Xen: 00000000ffc00000 - 0000000100000000 (reserved) > > bootconsole [xenboot0] enabled > > ERROR: Unable to locate IOAPIC for GSI 2 > > ERROR: Unable to locate IOAPIC for GSI 9 > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-16 19:48 ` pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 Pasi Kärkkäinen @ 2010-03-16 20:16 ` Jeremy Fitzhardinge 2010-03-16 20:20 ` Re: [Xen-users] " Pasi Kärkkäinen 0 siblings, 1 reply; 32+ messages in thread From: Jeremy Fitzhardinge @ 2010-03-16 20:16 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: xen-devel, xen-users, kishore kumar On 03/16/2010 12:48 PM, Pasi Kärkkäinen wrote: > On Tue, Mar 16, 2010 at 09:43:44PM +0200, Pasi Kärkkäinen wrote: > >> On Tue, Mar 16, 2010 at 10:32:17AM -0700, kishore kumar wrote: >> >>> Attached is the output captured from serial console. >>> >>> Machine does not boot after compiling xen 3.4.3 with pv_ops dom 0 kernel. >>> >>> Please let me know what is going wrong here. >>> >>> >> Ok this looks like a bug that is already being sorted out on xen-devel mailinglist. >> I added CC to xen-devel. >> >> > Those messages are not a problem in themselves, but the related problem is believed to be fixed in current xen/stable-2.6.32.x. It looks like the output stops there because the Xen console isn't set up properly for some reason. What is the full description of the problem? What versions, if any, did work as expected? J > Now added the CC for real :) > > -- Pasi > > >> >> >>> Thanks >>> >>> >> >>> Asserting Post complete GPIO!!! >>> Transfer control to CSM 16-bit binary for legacy boot >>> __ __ _____ _ _ _____ _ _ >>> \ \/ /___ _ __ |___ /| || | |___ / _ __ ___| || | _ __ _ __ ___ >>> \ // _ \ '_ \ |_ \| || |_ |_ \ __| '__/ __| || |_ __| '_ \| '__/ _ \ >>> / \ __/ | | | ___) |__ _| ___) |__| | | (__|__ _|__| |_) | | | __/ >>> /_/\_\___|_| |_| |____(_) |_|(_)____/ |_| \___| |_| | .__/|_| \___| >>> |_| >>> (XEN) Xen version 3.4.3-rc4-pre (kishore@localdomain) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar 15 13:44:31 PDT 2010 >>> (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 2010 +0000 19924:6e72f8c3c017 >>> (XEN) Command line: console=vga,com1 com1=115200,8n1 msi=1 iommu=1 >>> (XEN) Video information: >>> (XEN) VGA is text mode 80x25, font 8x16 >>> (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds >>> (XEN) EDID info not retrieved because no DDC retrieval method detected >>> (XEN) Disc information: >>> (XEN) Found 1 MBR signatures >>> (XEN) Found 1 EDD information structures >>> (XEN) Xen-e820 RAM map: >>> (XEN) 0000000000000000 - 000000000009d000 (usable) >>> (XEN) 000000000009d000 - 00000000000a0000 (reserved) >>> (XEN) 00000000000e0000 - 0000000000100000 (reserved) >>> (XEN) 0000000000100000 - 000000006d597000 (usable) >>> (XEN) 000000006d597000 - 000000006d686000 (reserved) >>> (XEN) 000000006d686000 - 000000006f598000 (usable) >>> (XEN) 000000006f598000 - 000000006f59a000 (reserved) >>> (XEN) 000000006f59a000 - 000000006f5af000 (ACPI NVS) >>> (XEN) 000000006f5af000 - 000000006f5d9000 (reserved) >>> (XEN) 000000006f5d9000 - 000000006f5f9000 (ACPI data) >>> (XEN) 000000006f5f9000 - 000000006f6df000 (ACPI NVS) >>> (XEN) 000000006f6df000 - 000000006f700000 (ACPI data) >>> (XEN) 000000006f700000 - 0000000080000000 (reserved) >>> (XEN) 00000000a0000000 - 00000000b0000000 (reserved) >>> (XEN) 00000000fc000000 - 00000000fd000000 (reserved) >>> (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) >>> (XEN) 00000000ffc00000 - 0000000100000000 (reserved) >>> (XEN) System RAM: 1780MB (1823000kB) >>> (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL ) >>> (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL THRLY 0 1000013) >>> (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL THRLY 0 MSFT 100000D) >>> (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL THRLY 3 MSFT 100000D) >>> (XEN) ACPI: FACS 6F5F9000, 0040 >>> (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL THRLY 0 MSFT 100000D) >>> (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL THRLY 1 MSFT 100000D) >>> (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL THRLY 1 MSFT 100000D) >>> (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL THRLY 1 MSFT 100000D) >>> (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL THRLY 0 MSFT 100000D) >>> (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 INTEL SSDT PM 4000 INTL 20061109) >>> (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL THRLY 1 MSFT 100000D) >>> (XEN) Domain heap initialised >>> (XEN) Processor #0 6:12 APIC version 21 >>> (XEN) Processor #2 6:12 APIC version 21 >>> (XEN) Processor #4 6:12 APIC version 21 >>> (XEN) Processor #16 6:12 APIC version 21 >>> (XEN) Processor #18 6:12 APIC version 21 >>> (XEN) Processor #20 6:12 APIC version 21 >>> (XEN) Processor #1 6:12 APIC version 21 >>> (XEN) Processor #3 6:12 APIC version 21 >>> (XEN) Processor #5 6:12 APIC version 21 >>> (XEN) Processor #17 6:12 APIC version 21 >>> (XEN) Processor #19 6:12 APIC version 21 >>> (XEN) Processor #21 6:12 APIC version 21 >>> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 >>> (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec90000, GSI 24-47 >>> (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs >>> (XEN) Intel VT-d DMAR tables have been parsed. >>> (XEN) Using scheduler: SMP Credit Scheduler (credit) >>> (XEN) Detected 3200.163 MHz processor. >>> (XEN) VMX: Supported advanced features: >>> (XEN) - APIC MMIO access virtualisation >>> (XEN) - APIC TPR shadow >>> (XEN) - Extended Page Tables (EPT) >>> (XEN) - Virtual-Processor Identifiers (VPID) >>> (XEN) - Virtual NMI >>> (XEN) - MSR direct-access bitmap >>> (XEN) VMX: EPT is available. >>> (XEN) VMX: VPID is available. >>> (XEN) HVM: VMX enabled >>> (XEN) HVM: Hardware Assisted Paging detected. >>> (XEN) CPU0: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 >>> (XEN) Booting processor 1/2 eip 88000 >>> (XEN) CPU1: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 >>> (XEN) Booting processor 2/4 eip 88000 >>> (XEN) CPU2: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 >>> (XEN) Booting processor 3/16 eip 88000 >>> (XEN) CPU3: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 >>> (XEN) Booting processor 4/18 eip 88000 >>> (XEN) CPU4: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 >>> (XEN) Booting processor 5/20 eip 88000 >>> (XEN) CPU5: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 >>> (XEN) Booting processor 6/1 eip 88000 >>> (XEN) CPU6: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 >>> (XEN) Booting processor 7/3 eip 88000 >>> (XEN) CPU7: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 >>> (XEN) Booting processor 8/5 eip 88000 >>> (XEN) CPU8: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 >>> (XEN) Booting processor 9/17 eip 88000 >>> (XEN) CPU9: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 >>> (XEN) Booting processor 10/19 eip 88000 >>> (XEN) CPU10: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 >>> (XEN) Booting processor 11/21 eip 88000 >>> (XEN) CPU11: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 >>> (XEN) Total of 12 processors activated. >>> (XEN) ENABLING IO-APIC IRQs >>> (XEN) -> Using new ACK method >>> (XEN) checking TSC synchronization across 12 CPUs: passed. >>> (XEN) Platform timer is 14.318MHz HPET >>> ?(XEN) Brought up 12 CPUs >>> (XEN) Intel VT-d Snoop Control supported. >>> (XEN) Intel VT-d DMA Passthrough not supported. >>> (XEN) Intel VT-d Queued Invalidation supported. >>> (XEN) Intel VT-d Interrupt Remapping supported. >>> (XEN) I/O virtualisation enabled >>> (XEN) I/O virtualisation for PV guests disabled >>> (XEN) xenoprof: Initialization failed. Intel processor model 44 for P6 class family is not supported >>> (XEN) *** LOADING DOMAIN 0 *** >>> (XEN) Xen kernel: 64-bit, lsb, compat32 >>> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x26bb000 >>> (XEN) PHYSICAL MEMORY ARRANGEMENT: >>> (XEN) Dom0 alloc.: 0000000064000000->0000000068000000 (404490 pages to be allocated) >>> (XEN) VIRTUAL MEMORY ARRANGEMENT: >>> (XEN) Loaded kernel: ffffffff81000000->ffffffff826bb000 >>> (XEN) Init. ramdisk: ffffffff826bb000->ffffffff82d0d800 >>> (XEN) Phys-Mach map: ffffffff82d0e000->ffffffff83044050 >>> (XEN) Start info: ffffffff83045000->ffffffff830454b4 >>> (XEN) Page tables: ffffffff83046000->ffffffff83063000 >>> (XEN) Boot stack: ffffffff83063000->ffffffff83064000 >>> (XEN) TOTAL: ffffffff80000000->ffffffff83400000 >>> (XEN) ENTRY ADDRESS: ffffffff819c1200 >>> (XEN) Dom0 has maximum 12 VCPUs >>> (XEN) Scrubbing Free RAM: .done. >>> (XEN) Xen trace buffers: disabled >>> (XEN) Std. Loglevel: Errors and warnings >>> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) >>> (XEN) Xen is relinquishing VGA console. >>> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) >>> (XEN) Freed 128kB init memory. >>> mapping kernel into physical memory >>> Xen: setup ISA identity maps >>> about to get started... >>> Initializing cgroup subsys cpuset >>> Initializing cgroup subsys cpu >>> Linux version 2.6.32.9 (kishore@localhost.localdomain) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 15 15:16:28 PDT 2010 >>> Command line: ro root=/dev/VolGroup01/LogVol00 earlyprintk=xen nomodeset rhgb quiet >>> KERNEL supported cpus: >>> Intel GenuineIntel >>> AMD AuthenticAMD >>> Centaur CentaurHauls >>> BIOS-provided physical RAM map: >>> Xen: 0000000000000000 - 000000000009d000 (usable) >>> Xen: 000000000009d000 - 0000000000100000 (reserved) >>> Xen: 0000000000100000 - 0000000066c0a000 (usable) >>> Xen: 000000006d597000 - 000000006d686000 (reserved) >>> Xen: 000000006f598000 - 000000006f59a000 (reserved) >>> Xen: 000000006f59a000 - 000000006f5af000 (ACPI NVS) >>> Xen: 000000006f5af000 - 000000006f5d9000 (reserved) >>> Xen: 000000006f5d9000 - 000000006f5f9000 (ACPI data) >>> Xen: 000000006f5f9000 - 000000006f6df000 (ACPI NVS) >>> Xen: 000000006f6df000 - 000000006f700000 (ACPI data) >>> Xen: 000000006f700000 - 0000000080000000 (reserved) >>> Xen: 00000000a0000000 - 00000000b0000000 (reserved) >>> Xen: 00000000fc000000 - 00000000fd000000 (reserved) >>> Xen: 00000000fed1c000 - 00000000fed20000 (reserved) >>> Xen: 00000000ffc00000 - 0000000100000000 (reserved) >>> bootconsole [xenboot0] enabled >>> ERROR: Unable to locate IOAPIC for GSI 2 >>> ERROR: Unable to locate IOAPIC for GSI 9 >>> >> >> _______________________________________________ >> Xen-users mailing list >> Xen-users@lists.xensource.com >> http://lists.xensource.com/xen-users >> > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-16 20:16 ` [Xen-devel] " Jeremy Fitzhardinge @ 2010-03-16 20:20 ` Pasi Kärkkäinen 2010-03-16 21:16 ` [Xen-devel] " kishore kumar 0 siblings, 1 reply; 32+ messages in thread From: Pasi Kärkkäinen @ 2010-03-16 20:20 UTC (permalink / raw) To: Jeremy Fitzhardinge; +Cc: xen-devel, xen-users, kishore kumar On Tue, Mar 16, 2010 at 01:16:28PM -0700, Jeremy Fitzhardinge wrote: > On 03/16/2010 12:48 PM, Pasi Kärkkäinen wrote: >> On Tue, Mar 16, 2010 at 09:43:44PM +0200, Pasi Kärkkäinen wrote: >> >>> On Tue, Mar 16, 2010 at 10:32:17AM -0700, kishore kumar wrote: >>> >>>> Attached is the output captured from serial console. >>>> >>>> Machine does not boot after compiling xen 3.4.3 with pv_ops dom 0 kernel. >>>> >>>> Please let me know what is going wrong here. >>>> >>>> >>> Ok this looks like a bug that is already being sorted out on xen-devel mailinglist. >>> I added CC to xen-devel. >>> >>> >> > > Those messages are not a problem in themselves, but the related problem > is believed to be fixed in current xen/stable-2.6.32.x. It looks like > the output stops there because the Xen console isn't set up properly for > some reason. > Yeah, remove "rhgb quiet" from the options.. the dom0 kernel cmdline should be like this: ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset -- Pasi ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-16 20:20 ` Re: [Xen-users] " Pasi Kärkkäinen @ 2010-03-16 21:16 ` kishore kumar 2010-03-16 21:29 ` Re: [Xen-users] " Pasi Kärkkäinen 0 siblings, 1 reply; 32+ messages in thread From: kishore kumar @ 2010-03-16 21:16 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users [-- Attachment #1.1: Type: text/plain, Size: 2149 bytes --] I did below steps. I pulled DOM 0 kernel from git clone git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git linux-2.6-xen cd linux-2.6-xen make clean cp -a .config .config-old wget -O .config http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 make oldconfig make bzImage make modules make modules_install cp -a .config /boot/config-2.6.32.9 cp -a System.map /boot/System.map-2.6.32.9 cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.9 and modified the grub.conf as below Root(hd0,0) kernel /xen.gz console=vga,com1 com1=115200,8n1 msi=1 iommu=1 module /vmlinuz-2.6.32.9 ro root=/dev/VolGroup01/LogVo100 rhgb quiet module /initrd-2.6.32.9.img and rebooted the machine. Then It booted with some xen messages and stopped. Those were the messages captured from serial console. Please let me know if I did something wrong here. On Tue, Mar 16, 2010 at 1:20 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote: > On Tue, Mar 16, 2010 at 01:16:28PM -0700, Jeremy Fitzhardinge wrote: > > On 03/16/2010 12:48 PM, Pasi Kärkkäinen wrote: > >> On Tue, Mar 16, 2010 at 09:43:44PM +0200, Pasi Kärkkäinen wrote: > >> > >>> On Tue, Mar 16, 2010 at 10:32:17AM -0700, kishore kumar wrote: > >>> > >>>> Attached is the output captured from serial console. > >>>> > >>>> Machine does not boot after compiling xen 3.4.3 with pv_ops dom 0 > kernel. > >>>> > >>>> Please let me know what is going wrong here. > >>>> > >>>> > >>> Ok this looks like a bug that is already being sorted out on xen-devel > mailinglist. > >>> I added CC to xen-devel. > >>> > >>> > >> > > > > Those messages are not a problem in themselves, but the related problem > > is believed to be fixed in current xen/stable-2.6.32.x. It looks like > > the output stops there because the Xen console isn't set up properly for > > some reason. > > > > Yeah, remove "rhgb quiet" from the options.. the dom0 kernel cmdline should > be like this: > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset > > -- Pasi > > > [-- Attachment #1.2: Type: text/html, Size: 4842 bytes --] [-- Attachment #2: Type: text/plain, Size: 137 bytes --] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-16 21:16 ` [Xen-devel] " kishore kumar @ 2010-03-16 21:29 ` Pasi Kärkkäinen 2010-03-16 21:56 ` [SPAM] Re: [Xen-devel] " kishore kumar 0 siblings, 1 reply; 32+ messages in thread From: Pasi Kärkkäinen @ 2010-03-16 21:29 UTC (permalink / raw) To: kishore kumar; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users On Tue, Mar 16, 2010 at 02:16:22PM -0700, kishore kumar wrote: > I did below steps. > > > I pulled DOM 0 kernel from > git clone git://[1]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > linux-2.6-xen > > cd linux-2.6-xen > > make clean > > cp -a .config .config-old > > wget -O .config > [2]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > make oldconfig > > make bzImage > > make modules > > make modules_install > > cp -a .config /boot/config-2.6.32.9 > > cp -a System.map /boot/System.map-2.6.32.9 > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.9 > > and modified the grub.conf as below > > > Root(hd0,0) > > kernel /xen.gz console=vga,com1 com1=115200,8n1 msi=1 iommu=1 > > module /vmlinuz-2.6.32.9 ro root=/dev/VolGroup01/LogVo100 rhgb quiet > > module /initrd-2.6.32.9.img > > > and rebooted the machine. Then It booted with some xen messages and > stopped. Those were the messages captured from serial console. > > Please let me know if I did something wrong here. > Please fix the kernel cmdline based on my earlier email, and capture and post the serial console log again! -- Pasi > > > On Tue, Mar 16, 2010 at 1:20 PM, Pasi Kärkkäinen <[3]pasik@iki.fi> wrote: > > On Tue, Mar 16, 2010 at 01:16:28PM -0700, Jeremy Fitzhardinge wrote: > > On 03/16/2010 12:48 PM, Pasi Kärkkäinen wrote: > >> On Tue, Mar 16, 2010 at 09:43:44PM +0200, Pasi Kärkkäinen wrote: > >> > >>> On Tue, Mar 16, 2010 at 10:32:17AM -0700, kishore kumar wrote: > >>> > >>>> Attached is the output captured from serial console. > >>>> > >>>> Machine does not boot after compiling xen 3.4.3 with pv_ops dom > 0 kernel. > >>>> > >>>> Please let me know what is going wrong here. > >>>> > >>>> > >>> Ok this looks like a bug that is already being sorted out on > xen-devel mailinglist. > >>> I added CC to xen-devel. > >>> > >>> > >> > > > > Those messages are not a problem in themselves, but the related > problem > > is believed to be fixed in current xen/stable-2.6.32.x. It looks like > > the output stops there because the Xen console isn't set up properly > for > > some reason. > > > > Yeah, remove "rhgb quiet" from the options.. the dom0 kernel cmdline > should be like this: > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset > -- Pasi > > References > > Visible links > 1. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 2. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 3. mailto:pasik@iki.fi ^ permalink raw reply [flat|nested] 32+ messages in thread
* [SPAM] Re: [Xen-devel] Re: pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-16 21:29 ` Re: [Xen-users] " Pasi Kärkkäinen @ 2010-03-16 21:56 ` kishore kumar 2010-03-16 22:03 ` Pasi Kärkkäinen 0 siblings, 1 reply; 32+ messages in thread From: kishore kumar @ 2010-03-16 21:56 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users [-- Attachment #1.1: Type: text/plain, Size: 3367 bytes --] Please find the attached log file after fixing the dom 0 kernel cmd line as below ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset Thanks On Tue, Mar 16, 2010 at 2:29 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote: > On Tue, Mar 16, 2010 at 02:16:22PM -0700, kishore kumar wrote: > > I did below steps. > > > > > > I pulled DOM 0 kernel from > > git clone git://[1] > git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > linux-2.6-xen > > > > cd linux-2.6-xen > > > > make clean > > > > cp -a .config .config-old > > > > wget -O .config > > [2] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > make oldconfig > > > > make bzImage > > > > make modules > > > > make modules_install > > > > cp -a .config /boot/config-2.6.32.9 > > > > cp -a System.map /boot/System.map-2.6.32.9 > > > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.9 > > > > and modified the grub.conf as below > > > > > > Root(hd0,0) > > > > kernel /xen.gz console=vga,com1 com1=115200,8n1 msi=1 iommu=1 > > > > module /vmlinuz-2.6.32.9 ro root=/dev/VolGroup01/LogVo100 rhgb quiet > > > > module /initrd-2.6.32.9.img > > > > > > and rebooted the machine. Then It booted with some xen messages and > > stopped. Those were the messages captured from serial console. > > > > Please let me know if I did something wrong here. > > > > Please fix the kernel cmdline based on my earlier email, and capture and > post the > serial console log again! > > -- Pasi > > > > > > > On Tue, Mar 16, 2010 at 1:20 PM, Pasi Kärkkäinen <[3]pasik@iki.fi> > wrote: > > > > On Tue, Mar 16, 2010 at 01:16:28PM -0700, Jeremy Fitzhardinge wrote: > > > On 03/16/2010 12:48 PM, Pasi Kärkkäinen wrote: > > >> On Tue, Mar 16, 2010 at 09:43:44PM +0200, Pasi Kärkkäinen wrote: > > >> > > >>> On Tue, Mar 16, 2010 at 10:32:17AM -0700, kishore kumar wrote: > > >>> > > >>>> Attached is the output captured from serial console. > > >>>> > > >>>> Machine does not boot after compiling xen 3.4.3 with pv_ops > dom > > 0 kernel. > > >>>> > > >>>> Please let me know what is going wrong here. > > >>>> > > >>>> > > >>> Ok this looks like a bug that is already being sorted out on > > xen-devel mailinglist. > > >>> I added CC to xen-devel. > > >>> > > >>> > > >> > > > > > > Those messages are not a problem in themselves, but the related > > problem > > > is believed to be fixed in current xen/stable-2.6.32.x. It looks > like > > > the output stops there because the Xen console isn't set up > properly > > for > > > some reason. > > > > > > > Yeah, remove "rhgb quiet" from the options.. the dom0 kernel cmdline > > should be like this: > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen > nomodeset > > -- Pasi > > > > References > > > > Visible links > > 1. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 2. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 3. mailto:pasik@iki.fi > [-- Attachment #1.2: Type: text/html, Size: 4720 bytes --] [-- Attachment #2: mar_16_log_2.txt --] [-- Type: text/plain, Size: 59998 bytes --] Asserting Post complete GPIO!!! Transfer control to CSM 16-bit binary for legacy boot __ __ _____ _ _ _____ _ _ \ \/ /___ _ __ |___ /| || | |___ / _ __ ___| || | _ __ _ __ ___ \ // _ \ '_ \ |_ \| || |_ |_ \ __| '__/ __| || |_ __| '_ \| '__/ _ \ / \ __/ | | | ___) |__ _| ___) |__| | | (__|__ _|__| |_) | | | __/ /_/\_\___|_| |_| |____(_) |_|(_)____/ |_| \___| |_| | .__/|_| \___| |_| (XEN) Xen version 3.4.3-rc4-pre (kishore@localdomain) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar 15 13:44:31 PDT 2010 (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 2010 +0000 19924:6e72f8c3c017 (XEN) Command line: console=vga,com1 com1=115200,8n1 msi=1 iommu=1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009d000 (usable) (XEN) 000000000009d000 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000006d597000 (usable) (XEN) 000000006d597000 - 000000006d686000 (reserved) (XEN) 000000006d686000 - 000000006f598000 (usable) (XEN) 000000006f598000 - 000000006f59a000 (reserved) (XEN) 000000006f59a000 - 000000006f5af000 (ACPI NVS) (XEN) 000000006f5af000 - 000000006f5d9000 (reserved) (XEN) 000000006f5d9000 - 000000006f5f9000 (ACPI data) (XEN) 000000006f5f9000 - 000000006f6df000 (ACPI NVS) (XEN) 000000006f6df000 - 000000006f700000 (ACPI data) (XEN) 000000006f700000 - 0000000080000000 (reserved) (XEN) 00000000a0000000 - 00000000b0000000 (reserved) (XEN) 00000000fc000000 - 00000000fd000000 (reserved) (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) (XEN) 00000000ffc00000 - 0000000100000000 (reserved) (XEN) System RAM: 1780MB (1823000kB) (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL ) (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL THRLY 0 1000013) (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL THRLY 0 MSFT 100000D) (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL THRLY 3 MSFT 100000D) (XEN) ACPI: FACS 6F5F9000, 0040 (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL THRLY 0 MSFT 100000D) (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL THRLY 1 MSFT 100000D) (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL THRLY 1 MSFT 100000D) (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL THRLY 1 MSFT 100000D) (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL THRLY 0 MSFT 100000D) (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 INTEL SSDT PM 4000 INTL 20061109) (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL THRLY 1 MSFT 100000D) (XEN) Domain heap initialised (XEN) Processor #0 6:12 APIC version 21 (XEN) Processor #2 6:12 APIC version 21 (XEN) Processor #4 6:12 APIC version 21 (XEN) Processor #16 6:12 APIC version 21 (XEN) Processor #18 6:12 APIC version 21 (XEN) Processor #20 6:12 APIC version 21 (XEN) Processor #1 6:12 APIC version 21 (XEN) Processor #3 6:12 APIC version 21 (XEN) Processor #5 6:12 APIC version 21 (XEN) Processor #17 6:12 APIC version 21 (XEN) Processor #19 6:12 APIC version 21 (XEN) Processor #21 6:12 APIC version 21 (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec90000, GSI 24-47 (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs (XEN) Intel VT-d DMAR tables have been parsed. (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 3200.207 MHz processor. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) VMX: EPT is available. (XEN) VMX: VPID is available. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging detected. (XEN) CPU0: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 (XEN) Booting processor 1/2 eip 88000 (XEN) CPU1: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 (XEN) Booting processor 2/4 eip 88000 (XEN) CPU2: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 (XEN) Booting processor 3/16 eip 88000 (XEN) CPU3: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 (XEN) Booting processor 4/18 eip 88000 (XEN) CPU4: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 (XEN) Booting processor 5/20 eip 88000 (XEN) CPU5: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 (XEN) Booting processor 6/1 eip 88000 (XEN) CPU6: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 (XEN) Booting processor 7/3 eip 88000 (XEN) CPU7: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 (XEN) Booting processor 8/5 eip 88000 (XEN) CPU8: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 (XEN) Booting processor 9/17 eip 88000 (XEN) CPU9: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 (XEN) Booting processor 10/19 eip 88000 (XEN) CPU10: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 (XEN) Booting processor 11/21 eip 88000 (XEN) CPU11: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 (XEN) Total of 12 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) checking TSC synchronization across 12 CPUs: passed. (XEN) Platform timer is 14.318MHz HPET я(XEN) Brought up 12 CPUs (XEN) Intel VT-d Snoop Control supported. (XEN) Intel VT-d DMA Passthrough not supported. (XEN) Intel VT-d Queued Invalidation supported. (XEN) Intel VT-d Interrupt Remapping supported. (XEN) I/O virtualisation enabled (XEN) I/O virtualisation for PV guests disabled (XEN) xenoprof: Initialization failed. Intel processor model 44 for P6 class family is not supported (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x26bb000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000064000000->0000000068000000 (404490 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff826bb000 (XEN) Init. ramdisk: ffffffff826bb000->ffffffff82d0d800 (XEN) Phys-Mach map: ffffffff82d0e000->ffffffff83044050 (XEN) Start info: ffffffff83045000->ffffffff830454b4 (XEN) Page tables: ffffffff83046000->ffffffff83063000 (XEN) Boot stack: ffffffff83063000->ffffffff83064000 (XEN) TOTAL: ffffffff80000000->ffffffff83400000 (XEN) ENTRY ADDRESS: ffffffff819c1200 (XEN) Dom0 has maximum 12 VCPUs (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 128kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32.9 (kishore@localhost.localdomain) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 15 15:16:28 PDT 2010 Command line: ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009d000 (usable) Xen: 000000000009d000 - 0000000000100000 (reserved) Xen: 0000000000100000 - 0000000066c0a000 (usable) Xen: 000000006d597000 - 000000006d686000 (reserved) Xen: 000000006f598000 - 000000006f59a000 (reserved) Xen: 000000006f59a000 - 000000006f5af000 (ACPI NVS) Xen: 000000006f5af000 - 000000006f5d9000 (reserved) Xen: 000000006f5d9000 - 000000006f5f9000 (ACPI data) Xen: 000000006f5f9000 - 000000006f6df000 (ACPI NVS) Xen: 000000006f6df000 - 000000006f700000 (ACPI data) Xen: 000000006f700000 - 0000000080000000 (reserved) Xen: 00000000a0000000 - 00000000b0000000 (reserved) Xen: 00000000fc000000 - 00000000fd000000 (reserved) Xen: 00000000fed1c000 - 00000000fed20000 (reserved) Xen: 00000000ffc00000 - 0000000100000000 (reserved) bootconsole [xenboot0] enabled DMI 2.4 present. last_pfn = 0x66c0a max_arch_pfn = 0x400000000 init_memory_mapping: 0000000000000000-0000000066c0a000 RAMDISK: 026bb000 - 02d0d800 ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL ) ACPI: XSDT 000000006f6fe120 00064 (v01 INTEL THRLY 00000000 01000013) ACPI: FACP 000000006f6fd000 000F4 (v04 INTEL THRLY 00000000 MSFT 0100000D) ACPI: DSDT 000000006f6f5000 074F1 (v02 INTEL THRLY 00000003 MSFT 0100000D) ACPI: FACS 000000006f5f9000 00040 ACPI: APIC 000000006f6f4000 001CC (v02 INTEL THRLY 00000000 MSFT 0100000D) ACPI: MCFG 000000006f6f3000 0003C (v01 INTEL THRLY 00000001 MSFT 0100000D) ACPI: HPET 000000006f6f2000 00038 (v01 INTEL THRLY 00000001 MSFT 0100000D) ACPI: SLIT 000000006f6f1000 00030 (v01 INTEL THRLY 00000001 MSFT 0100000D) ACPI: WDDT 000000006f6f0000 00040 (v01 INTEL THRLY 00000000 MSFT 0100000D) ACPI: SSDT 000000006f5d9000 1FDDC (v01 INTEL SSDT PM 00004000 INTL 20061109) ACPI: 000000006f6ee000 001D0 (v01 INTEL THRLY 00000001 MSFT 0100000D) No NUMA configuration found Faking a node at 0000000000000000-0000000066c0a000 Bootmem setup node 0 0000000000000000-0000000066c0a000 NODE_DATA [0000000000008000 - 000000000001ffff] bootmap [0000000000020000 - 000000000002cd87] pages d (9 early reservations) ==> bootmem [0000000000 - 0066c0a000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0003046000 - 0003063000] XEN PAGETABLES ==> [0003046000 - 0003063000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #3 [0001000000 - 000269ae98] TEXT DATA BSS ==> [0001000000 - 000269ae98] #4 [00026bb000 - 0002d0d800] RAMDISK ==> [00026bb000 - 0002d0d800] #5 [0002d0e000 - 0003046000] XEN START INFO ==> [0002d0e000 - 0003046000] #6 [000269b000 - 000269b011] BRK ==> [000269b000 - 000269b011] #7 [0000100000 - 000041a000] PGTABLE ==> [0000100000 - 000041a000] #8 [0000001000 - 0000001030] ACPI SLIT ==> [0000001000 - 0000001030] found SMP MP-table at [ffff8800000fd750] fd750 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x00066c0a ACPI: PM-Timer IO Port: 0x408 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 0, address 0xfec90000, GSI 24-24 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ERROR: Unable to locate IOAPIC for GSI 2 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ERROR: Unable to locate IOAPIC for GSI 9 Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a401 base: 0xfed00000 SMP: Allowing 12 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009d000 - 0000000000100000 Allocating PCI resources starting at b0000000 (gap: b0000000:4c000000) Booting paravirtualized kernel on Xen Xen version: 3.4.3-rc4-pre (preserve-AD) (dom0) NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1 PERCPU: Embedded 478 pages/cpu @ffff880005ebc000 s1928024 r8192 d21672 u1957888 pcpu-alloc: s1928024 r8192 d21672 u1957888 alloc=478*4096 pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 Xen: using vcpu_info placement Built 1 zonelists in Node order, mobility grouping on. Total pages: 409291 Policy zone: DMA32 Kernel command line: ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 DMA: Placing 64MB software IO TLB between ffff880007525000 - ffff88000b525000 DMA: software IO TLB at phys 0x7525000 - 0xb525000 xen_swiotlb_fixup: buf=ffff880007525000 size=67108864 xen_swiotlb_fixup: buf=ffff88000b585000 size=32768 Memory: 1514268k/1683496k available (4654k kernel code, 396k absent, 168832k reserved, 3443k data, 3396k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:3072 Already setup the GSI :0 Already setup the GSI :1 Already setup the GSI :2 Already setup the GSI :3 Already setup the GSI :4 Already setup the GSI :5 Already setup the GSI :6 Already setup the GSI :7 Already setup the GSI :8 Already setup the GSI :9 Already setup the GSI :10 Already setup the GSI :11 Already setup the GSI :12 Already setup the GSI :13 Already setup the GSI :14 Already setup the GSI :15 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 xen_allocate_pirq: returning irq 9 for gsi 9 Already setup the GSI :9 xen: acpi sci 9 Console: colour VGA+ 80x25 console [hvc0] enabled, bootconsole disabled console [hvc0] enabled, bootconsole disabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 6367 kB per task-struct memory footprint: 2688 bytes allocated 17039360 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups installing Xen timer for CPU 0 Detected 3200.206 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.41 BogoMIPS (lpj=3200206) Security Framework initialized SELinux: Initializing. Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU: Unsupported number of siblings 32 Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only. lockdep: fixing up alternatives. SMP alternatives: switching to UP code ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 27971 entries in 110 pages installing Xen timer for CPU 1 lockdep: fixing up alternatives. SMP alternatives: switching to SMP code Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 1/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 2/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 3 Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 4 Initializing CPU#4 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 4/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 5 Initializing CPU#5 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 5/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 6 Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 6/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 7 Initializing CPU#7 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 7/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 8 Initializing CPU#8 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 8/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 9 Initializing CPU#9 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 9/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 10 Initializing CPU#10 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 10/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 11 Initializing CPU#11 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 11/0x0 -> Node 0 CPU: Unsupported number of siblings 32 Brought up 12 CPUs Grant table initialized regulator: core version 0.5 Time: 14:45:00 Date: 03/16/10 NET: Registered protocol family 16 xenbus_probe_init ok ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base a0000000 segment 0 buses 0 - 255 PCI: MCFG area at a0000000 reserved in E820 PCI: Using MMCONFIG at a0000000 - afffffff PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI Error: Field [CPB3] at 96 exceeds Buffer [NULL] size 64 (bits) (20090903/dsopcode-596) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI Warning: Incorrect checksum in table [ ] - 97, should be DB (20090903/tbutils-314) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:08.0: PME# supported from D0 D3hot D3cold pci 0000:00:08.0: PME# disabled pci 0000:00:09.0: PME# supported from D0 D3hot D3cold pci 0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:13.0: PME# supported from D0 D3hot D3cold pci 0000:00:13.0: PME# disabled pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0600 (mask 001f) pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:01:00.1: PME# supported from D0 D3hot D3cold pci 0000:01:00.1: PME# disabled pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1e.0: transparent bridge ACPI: PCI Root Bridge [PCI1] (0000:fe) ACPI: PCI Root Bridge [PCI2] (0000:ff) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) xenbus_probe_backend_init bus registered ok xenbus_probe_frontend_init bus registered ok xen_balloon: Initialising balloon driver with page order 0. vgaarb: device added: PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource xen kstop/0 used greatest stack depth: 6568 bytes left kstop/1 used greatest stack depth: 6536 bytes left pnp: PnP ACPI init ACPI: bus type pnp registered xen_allocate_pirq: returning irq 8 for gsi 8 Already setup the GSI :8 xen_allocate_pirq: returning irq 13 for gsi 13 Already setup the GSI :13 pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:07: ioport range 0x500-0x53f has been reserved system 00:07: ioport range 0x400-0x47f has been reserved system 00:07: ioport range 0x800-0x81f has been reserved system 00:07: ioport range 0x2f8-0x2ff has been reserved system 00:07: iomem range 0xfed1c000-0xfed8bffe could not be reserved system 00:07: iomem range 0xff000000-0xffffffff could not be reserved system 00:07: iomem range 0xfee00000-0xfeefffff has been reserved system 00:07: iomem range 0xfe900000-0xfe90001f has been reserved system 00:07: iomem range 0xfea00000-0xfea0001f has been reserved system 00:07: iomem range 0xfed1b000-0xfed1bfff has been reserved pci 0000:0c:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x1000-0x1fff pci 0000:00:01.0: MEM window: 0xb1900000-0xb19fffff pci 0000:00:01.0: PREFETCH window: disabled pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 pci 0000:00:02.0: IO window: disabled pci 0000:00:02.0: MEM window: disabled pci 0000:00:02.0: PREFETCH window: disabled pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 pci 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM window: disabled pci 0000:00:03.0: PREFETCH window: disabled pci 0000:00:04.0: PCI bridge, secondary bus 0000:04 pci 0000:00:04.0: IO window: disabled pci 0000:00:04.0: MEM window: disabled pci 0000:00:04.0: PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, secondary bus 0000:05 pci 0000:00:05.0: IO window: disabled pci 0000:00:05.0: MEM window: disabled pci 0000:00:05.0: PREFETCH window: disabled pci 0000:00:06.0: PCI bridge, secondary bus 0000:06 pci 0000:00:06.0: IO window: disabled pci 0000:00:06.0: MEM window: disabled pci 0000:00:06.0: PREFETCH window: disabled pci 0000:00:07.0: PCI bridge, secondary bus 0000:07 pci 0000:00:07.0: IO window: disabled pci 0000:00:07.0: MEM window: disabled pci 0000:00:07.0: PREFETCH window: disabled pci 0000:00:08.0: PCI bridge, secondary bus 0000:08 pci 0000:00:08.0: IO window: disabled pci 0000:00:08.0: MEM window: disabled pci 0000:00:08.0: PREFETCH window: disabled pci 0000:00:09.0: PCI bridge, secondary bus 0000:09 pci 0000:00:09.0: IO window: 0x3000-0x3fff pci 0000:00:09.0: MEM window: 0xb1b00000-0xb1cfffff pci 0000:00:09.0: PREFETCH window: 0x000000b1d00000-0x000000b1efffff pci 0000:00:0a.0: PCI bridge, secondary bus 0000:0a pci 0000:00:0a.0: IO window: disabled pci 0000:00:0a.0: MEM window: disabled pci 0000:00:0a.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: 0xb1000000-0xb18fffff pci 0000:00:1c.4: PREFETCH window: 0x000000b0000000-0x000000b0ffffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0d pci 0000:00:1c.5: IO window: disabled pci 0000:00:1c.5: MEM window: disabled pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0e pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci 0000:00:02.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29 pci 0000:00:03.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 pci 0000:00:04.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25 pci 0000:00:05.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 pci 0000:00:06.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27 pci 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 pci 0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 pci 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 xen_allocate_pirq: returning irq 16 for gsi 16 Already setup the GSI :16 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 10, 4718592 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:01:00.0: Disabling L0s pci 0000:01:00.1: Disabling L0s Trying to unpack rootfs image as initramfs... Freeing initrd memory: 6474k freed DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config PCI-DMA: Using software bounce buffering for IO (SWIOTLB) DMA: Placing 64MB software IO TLB between ffff880007525000 - ffff88000b525000 DMA: software IO TLB at phys 0x7525000 - 0xb525000 audit: initializing netlink socket (disabled) type=2000 audit(1268750702.035:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 2970 cryptomgr_test used greatest stack depth: 5864 bytes left cryptomgr_test used greatest stack depth: 5816 bytes left alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp 0000:00:09.0:pcie04: HPC vendor_id 8086 device_id 3410 ss_vid 0 ss_did 0 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: Slot 2 already registered by another hotplug driver acpiphp_glue: Slot 2 already registered by another hotplug driver acpiphp_glue: Slot 2 already registered by another hotplug driver acpiphp_glue: Slot 2 already registered by another hotplug driver acpiphp_glue: Slot 2 already registered by another hotplug driver acpiphp_glue: Slot 2 already registered by another hotplug driver acpiphp_glue: Slot 2 already registered by another hotplug driver acpiphp_glue: Slot 2 already registered by another hotplug driver pci-stub: invalid id string "" input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] registering netback hpet_acpi_add: no address or irqs in _CRS Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 2996 ata2: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00180 irq 2996 ata3: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00200 irq 2996 ata4: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00280 irq 2996 ata5: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00300 irq 2996 ata6: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00380 irq 2996 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32.9 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb1a01000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver xen_allocate_pirq: returning irq 16 for gsi 16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020e0 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x000020c0 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 19 for gsi 19 Already setup the GSI :19 uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x000020a0 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 23 for gsi 23 Already setup the GSI :23 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 19 for gsi 19 Already setup the GSI :19 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 18 for gsi 18 Already setup the GSI :18 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 2:902:788 pci 0000:00:16.6: hash matches rtc_cmos 00:03: setting system clock to 2010-03-16 14:45:05 UTC (1268750705) Initalizing network drop monitor service ata2: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) usb 7-1: new low speed USB device using uhci_hcd and address 2 ====================================================== [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] 2.6.32.9 #1 ------------------------------------------------------ khubd/100 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (&retval->lock){......}, at: [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 and this task is already holding: (&uhci->lock){..-...}, at: [<ffffffff8137aedd>] uhci_urb_enqueue+0x46/0x7e3 which would create a new lock dependency: (&uhci->lock){..-...} -> (&retval->lock){......} but this new dependency connects a SOFTIRQ-irq-safe lock: (&uhci->lock){..-...} ... which became SOFTIRQ-irq-safe at: [<ffffffff8108ea6d>] __lock_acquire+0x2d2/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a [<ffffffff8135a479>] rh_timer_func+0xe/0x10 [<ffffffff810693bd>] run_timer_softirq+0x1a6/0x257 [<ffffffff810627e4>] __do_softirq+0xe6/0x1bc [<ffffffff81013fac>] call_softirq+0x1c/0x30 [<ffffffff81015794>] do_softirq+0x4b/0xa7 [<ffffffff81062229>] irq_exit+0x4a/0x89 [<ffffffff812bf9d9>] xen_evtchn_do_upcall+0x156/0x172 [<ffffffff81013ffe>] xen_do_hypervisor_callback+0x1e/0x30 to a SOFTIRQ-irq-unsafe lock: (purge_lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: ... [<ffffffff8108eadc>] __lock_acquire+0x341/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] _spin_lock+0x36/0x6b [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 [<ffffffff8110c161>] vmap_page_range+0xe/0x10 [<ffffffff8110c197>] map_vm_area+0x34/0x47 [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d [<ffffffff819c1d99>] start_kernel+0x3de/0x426 [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2 [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 other info that might help us debug this: 2 locks held by khubd/100: #0: (usb_address0_mutex){+.+...}, at: [<ffffffff81354f5f>] hub_port_init+0x81/0x7e4 #1: (&uhci->lock){..-...}, at: [<ffffffff8137aedd>] uhci_urb_enqueue+0x46/0x7e3 the dependencies between SOFTIRQ-irq-safe lock and the holding lock: -> (&uhci->lock){..-...} ops: 0 { IN-SOFTIRQ-W at: [<ffffffff8108ea6d>] __lock_acquire+0x2d2/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a [<ffffffff8135a479>] rh_timer_func+0xe/0x10 [<ffffffff810693bd>] run_timer_softirq+0x1a6/0x257 [<ffffffff810627e4>] __do_softirq+0xe6/0x1bc [<ffffffff81013fac>] call_softirq+0x1c/0x30 [<ffffffff81015794>] do_softirq+0x4b/0xa7 [<ffffffff81062229>] irq_exit+0x4a/0x89 [<ffffffff812bf9d9>] xen_evtchn_do_upcall+0x156/0x172 [<ffffffff81013ffe>] xen_do_hypervisor_callback+0x1e/0x30 INITIAL USE at: [<ffffffff8108eb29>] __lock_acquire+0x38e/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 [<ffffffff8137c3d7>] uhci_hub_control+0x74/0x401 [<ffffffff8135bdac>] usb_hcd_submit_urb+0x7a6/0xa1e [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113 [<ffffffff81358922>] hub_probe+0x37c/0xfaa [<ffffffff81360a35>] usb_probe_interface+0x15a/0x1f7 [<ffffffff81307635>] driver_probe_device+0xf8/0x218 [<ffffffff813077fa>] __device_attach+0x28/0x31 [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 [<ffffffff81307891>] device_attach+0x65/0x7c [<ffffffff8130667e>] bus_probe_device+0x27/0x3e [<ffffffff813045b3>] device_add+0x3ab/0x57d [<ffffffff8135e3ca>] usb_set_configuration+0x5b9/0x677 [<ffffffff81367b85>] generic_probe+0x67/0xae [<ffffffff813607b1>] usb_probe_device+0x7f/0x87 [<ffffffff81307635>] driver_probe_device+0xf8/0x218 [<ffffffff813077fa>] __device_attach+0x28/0x31 [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 [<ffffffff81307891>] device_attach+0x65/0x7c [<ffffffff8130667e>] bus_probe_device+0x27/0x3e [<ffffffff813045b3>] device_add+0x3ab/0x57d [<ffffffff8135616e>] usb_new_device+0x154/0x201 [<ffffffff8135b42e>] usb_add_hcd+0x4c5/0x69d [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 [<ffffffff81307635>] driver_probe_device+0xf8/0x218 [<ffffffff813077ae>] __driver_attach+0x59/0x7d [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 [<ffffffff813073fd>] driver_attach+0x21/0x23 [<ffffffff81306487>] bus_add_driver+0xe1/0x26b [<ffffffff81307ad5>] driver_register+0xa3/0x11a [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 [<ffffffff819f403b>] uhci_hcd_init+0x88/0xc1 [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b [<ffffffff819c1961>] kernel_init+0x172/0x1cc [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key at: [<ffffffff8268de38>] __key.33456+0x0/0x8 ... acquired at: [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 [<ffffffff8108f128>] __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>] uhci_alloc_qh+0x33/0x146 [<ffffffff8137af66>] uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>] usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113 [<ffffffff813551fb>] hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] hub_events+0x91e/0x11a2 [<ffffffff81358432>] hub_thread+0x25/0x199 [<ffffffff8107b8fd>] kthread+0x6e/0x76 [<ffffffff81013eaa>] child_rip+0xa/0x20 the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: -> (purge_lock){+.+...} ops: 0 { HARDIRQ-ON-W at: [<ffffffff8108eaba>] __lock_acquire+0x31f/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] _spin_lock+0x36/0x6b [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 [<ffffffff8110c161>] vmap_page_range+0xe/0x10 [<ffffffff8110c197>] map_vm_area+0x34/0x47 [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d [<ffffffff819c1d99>] start_kernel+0x3de/0x426 [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2 [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 SOFTIRQ-ON-W at: [<ffffffff8108eadc>] __lock_acquire+0x341/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] _spin_lock+0x36/0x6b [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 [<ffffffff8110c161>] vmap_page_range+0xe/0x10 [<ffffffff8110c197>] map_vm_area+0x34/0x47 [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d [<ffffffff819c1d99>] start_kernel+0x3de/0x426 [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2 [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 INITIAL USE at: [<ffffffff8108eb29>] __lock_acquire+0x38e/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] _spin_lock+0x36/0x6b [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 [<ffffffff8110c161>] vmap_page_range+0xe/0x10 [<ffffffff8110c197>] map_vm_area+0x34/0x47 [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d [<ffffffff819c1d99>] start_kernel+0x3de/0x426 [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2 [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 } ... key at: [<ffffffff81741ef8>] purge_lock.27226+0x18/0x40 ... acquired at: [<ffffffff8108f20c>] __lock_acquire+0xa71/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] _spin_lock+0x36/0x6b [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 [<ffffffff8100d7ca>] xen_create_contiguous_region+0x51/0x106 [<ffffffff81250d84>] xen_swiotlb_alloc_coherent+0x62/0xa6 [<ffffffff8111188c>] dma_pool_alloc+0x136/0x2a8 [<ffffffff81370efe>] ehci_qh_alloc+0x44/0x107 [<ffffffff81373f5d>] ehci_pci_setup+0x22a/0x9c1 [<ffffffff8135b18e>] usb_add_hcd+0x225/0x69d [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 [<ffffffff81307635>] driver_probe_device+0xf8/0x218 [<ffffffff813077ae>] __driver_attach+0x59/0x7d [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 [<ffffffff813073fd>] driver_attach+0x21/0x23 [<ffffffff81306487>] bus_add_driver+0xe1/0x26b [<ffffffff81307ad5>] driver_register+0xa3/0x11a [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 [<ffffffff819f3ee0>] ehci_hcd_init+0x7f/0xc0 [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b [<ffffffff819c1961>] kernel_init+0x172/0x1cc [<ffffffff81013eaa>] child_rip+0xa/0x20 -> (&retval->lock){......} ops: 0 { INITIAL USE at: [<ffffffff8108eb29>] __lock_acquire+0x38e/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 [<ffffffff81370efe>] ehci_qh_alloc+0x44/0x107 [<ffffffff81373f5d>] ehci_pci_setup+0x22a/0x9c1 [<ffffffff8135b18e>] usb_add_hcd+0x225/0x69d [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 [<ffffffff81307635>] driver_probe_device+0xf8/0x218 [<ffffffff813077ae>] __driver_attach+0x59/0x7d [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 [<ffffffff813073fd>] driver_attach+0x21/0x23 [<ffffffff81306487>] bus_add_driver+0xe1/0x26b [<ffffffff81307ad5>] driver_register+0xa3/0x11a [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 [<ffffffff819f3ee0>] ehci_hcd_init+0x7f/0xc0 [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b [<ffffffff819c1961>] kernel_init+0x172/0x1cc [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key at: [<ffffffff824dc3c4>] __key.24188+0x0/0x1c ... acquired at: [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 [<ffffffff8108f128>] __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>] uhci_alloc_qh+0x33/0x146 [<ffffffff8137af66>] uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>] usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113 [<ffffffff813551fb>] hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] hub_events+0x91e/0x11a2 [<ffffffff81358432>] hub_thread+0x25/0x199 [<ffffffff8107b8fd>] kthread+0x6e/0x76 [<ffffffff81013eaa>] child_rip+0xa/0x20 stack backtrace: Pid: 100, comm: khubd Not tainted 2.6.32.9 #1 Call Trace: [<ffffffff8108cd50>] check_usage+0x331/0x345 [<ffffffff81032d79>] ? pvclock_clocksource_read+0x47/0x80 [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 [<ffffffff8108f128>] __lock_acquire+0x98d/0xc07 [<ffffffff8111008c>] ? sys_swapoff+0x870/0x9d0 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff8111178c>] ? dma_pool_alloc+0x36/0x2a8 [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] ? dma_pool_alloc+0x36/0x2a8 [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 [<ffffffff8111a986>] ? init_object+0x73/0x7b [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf [<ffffffff8100f452>] ? check_events+0x12/0x20 [<ffffffff8137aa7b>] uhci_alloc_qh+0x33/0x146 [<ffffffff8111dda9>] ? kmem_cache_alloc+0xd9/0x150 [<ffffffff8137af66>] uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135a29c>] ? dma_map_single_attrs+0xb4/0xc6 [<ffffffff8135be92>] usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf [<ffffffff8100f452>] ? check_events+0x12/0x20 [<ffffffff8108b9ea>] ? lockdep_init_map+0x9f/0x115 [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1 [<ffffffff8107beb6>] ? __init_waitqueue_head+0x3a/0x4c [<ffffffff8135d51f>] usb_start_wait_urb+0x54/0x1b1 [<ffffffff8100f452>] ? check_events+0x12/0x20 [<ffffffff8135c939>] ? usb_alloc_urb+0x21/0x4b [<ffffffff8135c907>] ? usb_init_urb+0x2a/0x3b [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113 [<ffffffff8111c5ef>] ? kmem_cache_alloc_notrace+0xe8/0x111 [<ffffffff8135517a>] ? hub_port_init+0x29c/0x7e4 [<ffffffff813551fb>] hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] hub_events+0x91e/0x11a2 [<ffffffff8135840d>] ? hub_thread+0x0/0x199 [<ffffffff81358432>] hub_thread+0x25/0x199 [<ffffffff8107bb4f>] ? autoremove_wake_function+0x0/0x3d [<ffffffff8107b8fd>] kthread+0x6e/0x76 [<ffffffff81013eaa>] child_rip+0xa/0x20 [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc [<ffffffff81013810>] ? restore_args+0x0/0x30 [<ffffffff8107b9f2>] ? kthreadd+0xed/0x10f [<ffffffff81013ea0>] ? child_rip+0x0/0x20 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA, max UDMA/133 ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 3396k freed Write protecting the kernel read-only data: 6988k Red Hat nash version 5.1.19.6 starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. usb 7-1: New USB device found, idVendor=0458, idProduct=0007 usb 7-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 usb 7-1: Product: Optical Mouse usb 7-1: Manufacturer: KYE usb 7-1: configuration #1 chosen from 1 choice input: KYE Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input3 generic-usb 0003:0458:0007.0001: input,hidraw0: USB HID v1.10 Mouse [KYE Optical Mouse] on usb-0000:00:1d.1-1/input0 Creating block device nodes. Loading aacraid.ko module Adaptec aacraid driver 1.1-5[2461]-ms Scanning and configuring dmraid supported devices Scanning logical volumes Reading all physical volumes. This may take a while... Activating logical volumes Volume group "VolGroup01" not found Trying to resume from /dev/VolGroup01/LogVol01 Unable to access resume device (/dev/VolGroup01/LogVol01) Creating root device. Mounting root filesystem. mount: could not find filesystem '/dev/root' Setting up other filesystems. Setting up new root fs setuproot: moving /dev failed: No such file or directory no fstab.sys, mounting internal defaults setuproot: error mounting /proc: No such file or directory setuproot: error mounting /sys: No such file or directory Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys switchroot: mount failed: No such file or directory init used greatest stack depth: 4088 bytes left Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.32.9 #1 Call Trace: [<ffffffff8105b73f>] panic+0xa5/0x167 [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf [<ffffffff8105f2ab>] ? do_exit+0x38a/0x701 [<ffffffff8100f43f>] ? xen_restore_fl_direct_end+0x0/0x1 [<ffffffff8108f81b>] ? lock_release+0x179/0x184 [<ffffffff8108ca1d>] ? trace_hardirqs_on+0xd/0xf [<ffffffff81484fcf>] ? _write_unlock_irq+0x37/0x3c [<ffffffff8105ef9f>] do_exit+0x7e/0x701 [<ffffffff8105f6be>] sys_exit_group+0x0/0x1b [<ffffffff8105f6d5>] sys_exit_group+0x17/0x1b [<ffffffff81012d72>] system_call_fastpath+0x16/0x1b [-- Attachment #3: Type: text/plain, Size: 137 bytes --] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-16 21:56 ` [SPAM] Re: [Xen-devel] " kishore kumar @ 2010-03-16 22:03 ` Pasi Kärkkäinen 2010-03-16 22:22 ` kishore kumar 0 siblings, 1 reply; 32+ messages in thread From: Pasi Kärkkäinen @ 2010-03-16 22:03 UTC (permalink / raw) To: kishore kumar; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users On Tue, Mar 16, 2010 at 02:56:06PM -0700, kishore kumar wrote: > Please find the attached log file after fixing the dom 0 kernel cmd line > as below > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset > There's something wrong with the log, the dom0 kernel parts are all on one line.. It's really difficult to read it. -- Pasi > Thanks > > > On Tue, Mar 16, 2010 at 2:29 PM, Pasi Kärkkäinen <[1]pasik@iki.fi> wrote: > > On Tue, Mar 16, 2010 at 02:16:22PM -0700, kishore kumar wrote: > > I did below steps. > > > > > > I pulled DOM 0 kernel from > > git clone > git://[1][2]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > linux-2.6-xen > > > > cd linux-2.6-xen > > > > make clean > > > > cp -a .config .config-old > > > > wget -O .config > > > [2][3]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > make oldconfig > > > > make bzImage > > > > make modules > > > > make modules_install > > > > cp -a .config /boot/config-2.6.32.9 > > > > cp -a System.map /boot/System.map-2.6.32.9 > > > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.9 > > > > and modified the grub.conf as below > > > > > > Root(hd0,0) > > > > kernel /xen.gz console=vga,com1 com1=115200,8n1 msi=1 iommu=1 > > > > module /vmlinuz-2.6.32.9 ro root=/dev/VolGroup01/LogVo100 rhgb > quiet > > > > module /initrd-2.6.32.9.img > > > > > > and rebooted the machine. Then It booted with some xen messages > and > > stopped. Those were the messages captured from serial console. > > > > Please let me know if I did something wrong here. > > > > Please fix the kernel cmdline based on my earlier email, and capture and > post the > serial console log again! > > -- Pasi > > > > > > On Tue, Mar 16, 2010 at 1:20 PM, Pasi Kärkkäinen > <[3][4]pasik@iki.fi> wrote: > > > > On Tue, Mar 16, 2010 at 01:16:28PM -0700, Jeremy Fitzhardinge > wrote: > > > On 03/16/2010 12:48 PM, Pasi Kärkkäinen wrote: > > >> On Tue, Mar 16, 2010 at 09:43:44PM +0200, Pasi Kärkkäinen > wrote: > > >> > > >>> On Tue, Mar 16, 2010 at 10:32:17AM -0700, kishore kumar > wrote: > > >>> > > >>>> Attached is the output captured from serial console. > > >>>> > > >>>> Machine does not boot after compiling xen 3.4.3 with > pv_ops dom > > 0 kernel. > > >>>> > > >>>> Please let me know what is going wrong here. > > >>>> > > >>>> > > >>> Ok this looks like a bug that is already being sorted out on > > xen-devel mailinglist. > > >>> I added CC to xen-devel. > > >>> > > >>> > > >> > > > > > > Those messages are not a problem in themselves, but the related > > problem > > > is believed to be fixed in current xen/stable-2.6.32.x. It > looks like > > > the output stops there because the Xen console isn't set up > properly > > for > > > some reason. > > > > > > > Yeah, remove "rhgb quiet" from the options.. the dom0 kernel > cmdline > > should be like this: > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen > nomodeset > > -- Pasi > > > > References > > > > Visible links > > 1. [5]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 2. > [6]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 3. mailto:[7]pasik@iki.fi > > References > > Visible links > 1. mailto:pasik@iki.fi > 2. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 3. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 4. mailto:pasik@iki.fi > 5. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 6. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 7. mailto:pasik@iki.fi > Asserting Post complete GPIO!!! > Transfer control to CSM 16-bit binary for legacy boot > __ __ _____ _ _ _____ _ _ > \ \/ /___ _ __ |___ /| || | |___ / _ __ ___| || | _ __ _ __ ___ > \ // _ \ '_ \ |_ \| || |_ |_ \ __| '__/ __| || |_ __| '_ \| '__/ _ \ > / \ __/ | | | ___) |__ _| ___) |__| | | (__|__ _|__| |_) | | | __/ > /_/\_\___|_| |_| |____(_) |_|(_)____/ |_| \___| |_| | .__/|_| \___| > |_| > (XEN) Xen version 3.4.3-rc4-pre (kishore@localdomain) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar 15 13:44:31 PDT 2010 > (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 2010 +0000 19924:6e72f8c3c017 > (XEN) Command line: console=vga,com1 com1=115200,8n1 msi=1 iommu=1 > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds > (XEN) EDID info not retrieved because no DDC retrieval method detected > (XEN) Disc information: > (XEN) Found 1 MBR signatures > (XEN) Found 1 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009d000 (usable) > (XEN) 000000000009d000 - 00000000000a0000 (reserved) > (XEN) 00000000000e0000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 000000006d597000 (usable) > (XEN) 000000006d597000 - 000000006d686000 (reserved) > (XEN) 000000006d686000 - 000000006f598000 (usable) > (XEN) 000000006f598000 - 000000006f59a000 (reserved) > (XEN) 000000006f59a000 - 000000006f5af000 (ACPI NVS) > (XEN) 000000006f5af000 - 000000006f5d9000 (reserved) > (XEN) 000000006f5d9000 - 000000006f5f9000 (ACPI data) > (XEN) 000000006f5f9000 - 000000006f6df000 (ACPI NVS) > (XEN) 000000006f6df000 - 000000006f700000 (ACPI data) > (XEN) 000000006f700000 - 0000000080000000 (reserved) > (XEN) 00000000a0000000 - 00000000b0000000 (reserved) > (XEN) 00000000fc000000 - 00000000fd000000 (reserved) > (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) > (XEN) 00000000ffc00000 - 0000000100000000 (reserved) > (XEN) System RAM: 1780MB (1823000kB) > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL ) > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL THRLY 0 1000013) > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL THRLY 0 MSFT 100000D) > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL THRLY 3 MSFT 100000D) > (XEN) ACPI: FACS 6F5F9000, 0040 > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL THRLY 0 MSFT 100000D) > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL THRLY 1 MSFT 100000D) > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL THRLY 1 MSFT 100000D) > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL THRLY 1 MSFT 100000D) > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL THRLY 0 MSFT 100000D) > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 INTEL SSDT PM 4000 INTL 20061109) > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL THRLY 1 MSFT 100000D) > (XEN) Domain heap initialised > (XEN) Processor #0 6:12 APIC version 21 > (XEN) Processor #2 6:12 APIC version 21 > (XEN) Processor #4 6:12 APIC version 21 > (XEN) Processor #16 6:12 APIC version 21 > (XEN) Processor #18 6:12 APIC version 21 > (XEN) Processor #20 6:12 APIC version 21 > (XEN) Processor #1 6:12 APIC version 21 > (XEN) Processor #3 6:12 APIC version 21 > (XEN) Processor #5 6:12 APIC version 21 > (XEN) Processor #17 6:12 APIC version 21 > (XEN) Processor #19 6:12 APIC version 21 > (XEN) Processor #21 6:12 APIC version 21 > (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec90000, GSI 24-47 > (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs > (XEN) Intel VT-d DMAR tables have been parsed. > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 3200.207 MHz processor. > (XEN) VMX: Supported advanced features: > (XEN) - APIC MMIO access virtualisation > (XEN) - APIC TPR shadow > (XEN) - Extended Page Tables (EPT) > (XEN) - Virtual-Processor Identifiers (VPID) > (XEN) - Virtual NMI > (XEN) - MSR direct-access bitmap > (XEN) VMX: EPT is available. > (XEN) VMX: VPID is available. > (XEN) HVM: VMX enabled > (XEN) HVM: Hardware Assisted Paging detected. > (XEN) CPU0: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > (XEN) Booting processor 1/2 eip 88000 > (XEN) CPU1: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > (XEN) Booting processor 2/4 eip 88000 > (XEN) CPU2: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > (XEN) Booting processor 3/16 eip 88000 > (XEN) CPU3: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > (XEN) Booting processor 4/18 eip 88000 > (XEN) CPU4: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > (XEN) Booting processor 5/20 eip 88000 > (XEN) CPU5: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > (XEN) Booting processor 6/1 eip 88000 > (XEN) CPU6: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > (XEN) Booting processor 7/3 eip 88000 > (XEN) CPU7: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > (XEN) Booting processor 8/5 eip 88000 > (XEN) CPU8: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > (XEN) Booting processor 9/17 eip 88000 > (XEN) CPU9: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > (XEN) Booting processor 10/19 eip 88000 > (XEN) CPU10: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > (XEN) Booting processor 11/21 eip 88000 > (XEN) CPU11: Intel Genuine Intel(R) CPU 000 @ 3.20GHz stepping 00 > (XEN) Total of 12 processors activated. > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) checking TSC synchronization across 12 CPUs: passed. > (XEN) Platform timer is 14.318MHz HPET > ?(XEN) Brought up 12 CPUs > (XEN) Intel VT-d Snoop Control supported. > (XEN) Intel VT-d DMA Passthrough not supported. > (XEN) Intel VT-d Queued Invalidation supported. > (XEN) Intel VT-d Interrupt Remapping supported. > (XEN) I/O virtualisation enabled > (XEN) I/O virtualisation for PV guests disabled > (XEN) xenoprof: Initialization failed. Intel processor model 44 for P6 class family is not supported > (XEN) *** LOADING DOMAIN 0 *** > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x26bb000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000064000000->0000000068000000 (404490 pages to be allocated) > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff81000000->ffffffff826bb000 > (XEN) Init. ramdisk: ffffffff826bb000->ffffffff82d0d800 > (XEN) Phys-Mach map: ffffffff82d0e000->ffffffff83044050 > (XEN) Start info: ffffffff83045000->ffffffff830454b4 > (XEN) Page tables: ffffffff83046000->ffffffff83063000 > (XEN) Boot stack: ffffffff83063000->ffffffff83064000 > (XEN) TOTAL: ffffffff80000000->ffffffff83400000 > (XEN) ENTRY ADDRESS: ffffffff819c1200 > (XEN) Dom0 has maximum 12 VCPUs > (XEN) Scrubbing Free RAM: .done. > (XEN) Xen trace buffers: disabled > (XEN) Std. Loglevel: Errors and warnings > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) > (XEN) Xen is relinquishing VGA console. > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) > (XEN) Freed 128kB init memory. > mapping kernel into physical memory > Xen: setup ISA identity maps > about to get started... > Initializing cgroup subsys cpuset > Initializing cgroup subsys cpu > Linux version 2.6.32.9 (kishore@localhost.localdomain) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 15 15:16:28 PDT 2010 > Command line: ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset > KERNEL supported cpus: > Intel GenuineIntel > AMD AuthenticAMD > Centaur CentaurHauls > BIOS-provided physical RAM map: > Xen: 0000000000000000 - 000000000009d000 (usable) > Xen: 000000000009d000 - 0000000000100000 (reserved) > Xen: 0000000000100000 - 0000000066c0a000 (usable) > Xen: 000000006d597000 - 000000006d686000 (reserved) > Xen: 000000006f598000 - 000000006f59a000 (reserved) > Xen: 000000006f59a000 - 000000006f5af000 (ACPI NVS) > Xen: 000000006f5af000 - 000000006f5d9000 (reserved) > Xen: 000000006f5d9000 - 000000006f5f9000 (ACPI data) > Xen: 000000006f5f9000 - 000000006f6df000 (ACPI NVS) > Xen: 000000006f6df000 - 000000006f700000 (ACPI data) > Xen: 000000006f700000 - 0000000080000000 (reserved) > Xen: 00000000a0000000 - 00000000b0000000 (reserved) > Xen: 00000000fc000000 - 00000000fd000000 (reserved) > Xen: 00000000fed1c000 - 00000000fed20000 (reserved) > Xen: 00000000ffc00000 - 0000000100000000 (reserved) > bootconsole [xenboot0] enabled > DMI 2.4 present. > last_pfn = 0x66c0a max_arch_pfn = 0x400000000 > init_memory_mapping: 0000000000000000-0000000066c0a000 > RAMDISK: 026bb000 - 02d0d800 > ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL ) > ACPI: XSDT 000000006f6fe120 00064 (v01 INTEL THRLY 00000000 01000013) > ACPI: FACP 000000006f6fd000 000F4 (v04 INTEL THRLY 00000000 MSFT 0100000D) > ACPI: DSDT 000000006f6f5000 074F1 (v02 INTEL THRLY 00000003 MSFT 0100000D) > ACPI: FACS 000000006f5f9000 00040 > ACPI: APIC 000000006f6f4000 001CC (v02 INTEL THRLY 00000000 MSFT 0100000D) > ACPI: MCFG 000000006f6f3000 0003C (v01 INTEL THRLY 00000001 MSFT 0100000D) > ACPI: HPET 000000006f6f2000 00038 (v01 INTEL THRLY 00000001 MSFT 0100000D) > ACPI: SLIT 000000006f6f1000 00030 (v01 INTEL THRLY 00000001 MSFT 0100000D) > ACPI: WDDT 000000006f6f0000 00040 (v01 INTEL THRLY 00000000 MSFT 0100000D) > ACPI: SSDT 000000006f5d9000 1FDDC (v01 INTEL SSDT PM 00004000 INTL 20061109) > ACPI: 000000006f6ee000 001D0 (v01 INTEL THRLY 00000001 MSFT 0100000D) > No NUMA configuration found > Faking a node at 0000000000000000-0000000066c0a000 > Bootmem setup node 0 0000000000000000-0000000066c0a000 > NODE_DATA [0000000000008000 - 000000000001ffff] > bootmap [0000000000020000 - 000000000002cd87] pages d > (9 early reservations) ==> bootmem [0000000000 - 0066c0a000] > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > #1 [0003046000 - 0003063000] XEN PAGETABLES ==> [0003046000 - 0003063000] > #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] > #3 [0001000000 - 000269ae98] TEXT DATA BSS ==> [0001000000 - 000269ae98] > #4 [00026bb000 - 0002d0d800] RAMDISK ==> [00026bb000 - 0002d0d800] > #5 [0002d0e000 - 0003046000] XEN START INFO ==> [0002d0e000 - 0003046000] > #6 [000269b000 - 000269b011] BRK ==> [000269b000 - 000269b011] > #7 [0000100000 - 000041a000] PGTABLE ==> [0000100000 - 000041a000] > #8 [0000001000 - 0000001030] ACPI SLIT ==> [0000001000 - 0000001030] > found SMP MP-table at [ffff8800000fd750] fd750 > Zone PFN ranges: > DMA 0x00000000 -> 0x00001000 > DMA32 0x00001000 -> 0x00100000 > Normal 0x00100000 -> 0x00100000 > Movable zone start PFN for each node > early_node_map[2] active PFN ranges > 0: 0x00000000 -> 0x0000009d > 0: 0x00000100 -> 0x00066c0a > ACPI: PM-Timer IO Port: 0x408 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled) > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] enabled) > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled) > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled) > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled) > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) > ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) > ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) > ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) > ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) > ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) > ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) > ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) > ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1]) > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 > ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24]) > IOAPIC[1]: apic_id 9, version 0, address 0xfec90000, GSI 24-24 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ERROR: Unable to locate IOAPIC for GSI 2 > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ERROR: Unable to locate IOAPIC for GSI 9 > Using ACPI (MADT) for SMP configuration information > ACPI: HPET id: 0x8086a401 base: 0xfed00000 > SMP: Allowing 12 CPUs, 0 hotplug CPUs > PM: Registered nosave memory: 000000000009d000 - 0000000000100000 > Allocating PCI resources starting at b0000000 (gap: b0000000:4c000000) > Booting paravirtualized kernel on Xen > Xen version: 3.4.3-rc4-pre (preserve-AD) (dom0) > NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1 > PERCPU: Embedded 478 pages/cpu @ffff880005ebc000 s1928024 r8192 d21672 u1957888 > pcpu-alloc: s1928024 r8192 d21672 u1957888 alloc=478*4096 > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 > Xen: using vcpu_info placement > Built 1 zonelists in Node order, mobility grouping on. Total pages: 409291 > Policy zone: DMA32 > Kernel command line: ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset > PID hash table entries: 4096 (order: 3, 32768 bytes) > Initializing CPU#0 > DMA: Placing 64MB software IO TLB between ffff880007525000 - ffff88000b525000 > DMA: software IO TLB at phys 0x7525000 - 0xb525000 > xen_swiotlb_fixup: buf=ffff880007525000 size=67108864 > xen_swiotlb_fixup: buf=ffff88000b585000 size=32768 > Memory: 1514268k/1683496k available (4654k kernel code, 396k absent, 168832k reserved, 3443k data, 3396k init) > SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 > Hierarchical RCU implementation. > NR_IRQS:4352 nr_irqs:3072 > Already setup the GSI :0 > Already setup the GSI :1 > Already setup the GSI :2 > Already setup the GSI :3 > Already setup the GSI :4 > Already setup the GSI :5 > Already setup the GSI :6 > Already setup the GSI :7 > Already setup the GSI :8 > Already setup the GSI :9 > Already setup the GSI :10 > Already setup the GSI :11 > Already setup the GSI :12 > Already setup the GSI :13 > Already setup the GSI :14 > Already setup the GSI :15 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 > xen_allocate_pirq: returning irq 9 for gsi 9 > Already setup the GSI :9 > xen: acpi sci 9 > Console: colour VGA+ 80x25 > console [hvc0] enabled, bootconsole disabled console [hvc0] enabled, bootconsole disabled > Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 6367 kB per task-struct memory footprint: 2688 bytes allocated 17039360 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups installing Xen timer for CPU 0 Detected 3200.206 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.41 BogoMIPS (lpj=3200206) Security Framework initialized SELinux: Initializing. Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU: Unsupported number of siblings 32 Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only. lockdep: fixing up alternatives. SMP alternatives: switching to UP code ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 27971 entries in 110 pages installing Xen timer for CPU 1 lockdep: fixing up alternatives. SMP alternatives: switching to SMP code Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 1/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 2/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 3 Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 4 Initializing CPU#4 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 4/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 5 Initializing CPU#5 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 5/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 6 Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 6/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 7 Initializing CPU#7 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 7/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 8 Initializing CPU#8 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 8/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 9 Initializing CPU#9 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 9/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 10 Initializing CPU#10 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 10/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer for CPU 11 Initializing CPU#11 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 11/0x0 -> Node 0 CPU: Unsupported number of siblings 32 Brought up 12 CPUs Grant table initialized regulator: core version 0.5 Time: 14:45:00 Date: 03/16/10 NET: Registered protocol family 16 xenbus_probe_init ok ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base a0000000 segment 0 buses 0 - 255 PCI: MCFG area at a0000000 reserved in E820 PCI: Using MMCONFIG at a0000000 - afffffff PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI Error: Field [CPB3] at 96 exceeds Buffer [NULL] size 64 (bits) (20090903/dsopcode-596) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI Warning: Incorrect checksum in table [ ] - 97, should be DB (20090903/tbutils-314) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:08.0: PME# supported from D0 D3hot D3cold pci 0000:00:08.0: PME# disabled pci 0000:00:09.0: PME# supported from D0 D3hot D3cold pci 0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:13.0: PME# supported from D0 D3hot D3cold pci 0000:00:13.0: PME# disabled pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0600 (mask 001f) pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:01:00.1: PME# supported from D0 D3hot D3cold pci 0000:01:00.1: PME# disabled pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1e.0: transparent bridge ACPI: PCI Root Bridge [PCI1] (0000:fe) ACPI: PCI Root Bridge [PCI2] (0000:ff) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) xenbus_probe_backend_init bus registered ok xenbus_probe_frontend_init bus registered ok xen_balloon: Initialising balloon driver with page order 0. vgaarb: device added: PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource xen kstop/0 used greatest stack depth: 6568 bytes left kstop/1 used greatest stack depth: 6536 bytes left pnp: PnP ACPI init ACPI: bus type pnp registered xen_allocate_pirq: returning irq 8 for gsi 8 Already setup the GSI :8 xen_allocate_pirq: returning irq 13 for gsi 13 Already setup the GSI :13 pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:07: ioport range 0x500-0x53f has been reserved system 00:07: ioport range 0x400-0x47f has been reserved system 00:07: ioport range 0x800-0x81f has been reserved system 00:07: ioport range 0x2f8-0x2ff has been reserved system 00:07: iomem range 0xfed1c000-0xfed8bffe could not be reserved system 00:07: iomem range 0xff000000-0xffffffff could not be reserved system 00:07: iomem range 0xfee00000-0xfeefffff has been reserved system 00:07: iomem range 0xfe900000-0xfe90001f has been reserved system 00:07: iomem range 0xfea00000-0xfea0001f has been reserved system 00:07: iomem range 0xfed1b000-0xfed1bfff has been reserved pci 0000:0c:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x1000-0x1fff pci 0000:00:01.0: MEM window: 0xb1900000-0xb19fffff pci 0000:00:01.0: PREFETCH window: disabled pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 pci 0000:00:02.0: IO window: disabled pci 0000:00:02.0: MEM window: disabled pci 0000:00:02.0: PREFETCH window: disabled pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 pci 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM window: disabled pci 0000:00:03.0: PREFETCH window: disabled pci 0000:00:04.0: PCI bridge, secondary bus 0000:04 pci 0000:00:04.0: IO window: disabled pci 0000:00:04.0: MEM window: disabled pci 0000:00:04.0: PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, secondary bus 0000:05 pci 0000:00:05.0: IO window: disabled pci 0000:00:05.0: MEM window: disabled pci 0000:00:05.0: PREFETCH window: disabled pci 0000:00:06.0: PCI bridge, secondary bus 0000:06 pci 0000:00:06.0: IO window: disabled pci 0000:00:06.0: MEM window: disabled pci 0000:00:06.0: PREFETCH window: disabled pci 0000:00:07.0: PCI bridge, secondary bus 0000:07 pci 0000:00:07.0: IO window: disabled pci 0000:00:07.0: MEM window: disabled pci 0000:00:07.0: PREFETCH window: disabled pci 0000:00:08.0: PCI bridge, secondary bus 0000:08 pci 0000:00:08.0: IO window: disabled pci 0000:00:08.0: MEM window: disabled pci 0000:00:08.0: PREFETCH window: disabled pci 0000:00:09.0: PCI bridge, secondary bus 0000:09 pci 0000:00:09.0: IO window: 0x3000-0x3fff pci 0000:00:09.0: MEM window: 0xb1b00000-0xb1cfffff pci 0000:00:09.0: PREFETCH window: 0x000000b1d00000-0x000000b1efffff pci 0000:00:0a.0: PCI bridge, secondary bus 0000:0a pci 0000:00:0a.0: IO window: disabled pci 0000:00:0a.0: MEM window: disabled pci 0000:00:0a.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: 0xb1000000-0xb18fffff pci 0000:00:1c.4: PREFETCH window: 0x000000b0000000-0x000000b0ffffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0d pci 0000:00:1c.5: IO window: disabled pci 0000:00:1c.5: MEM window: disabled pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0e pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci 0000:00:02.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29 pci 0000:00:03.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 pci 0000:00:04.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25 pci 0000:00:05.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 pci 0000:00:06.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27 pci 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 pci 0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 pci 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 xen_allocate_pirq: returning irq 16 for gsi 16 Already setup the GSI :16 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 10, 4718592 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:01:00.0: Disabling L0s pci 0000:01:00.1: Disabling L0s Trying to unpack rootfs image as initramfs... Freeing initrd memory: 6474k freed DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config PCI-DMA: Using software bounce buffering for IO (SWIOTLB) DMA: Placing 64MB software IO TLB between ffff880007525000 - ffff88000b525000 DMA: software IO TLB at phys 0x7525000 - 0xb525000 audit: initializing netlink socket (disabled) type=2000 audit(1268750702.035:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 2970 cryptomgr_test used greatest stack depth: 5864 bytes left cryptomgr_test used greatest stack depth: 5816 bytes left alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp 0000:00:09.0:pcie04: HPC vendor_id 8086 device_id 3410 ss_vid 0 ss_did 0 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: Slot 2 already registered by another hotplug driver acpiphp_glue: Slot 2 already registered by another hotplug driver acpiphp_glue: Slot 2 already registered by another hotplug driver acpiphp_glue: Slot 2 already registered by another hotplug driver acpiphp_glue: Slot 2 already registered by another hotplug driver acpiphp_glue: Slot 2 already registered by another hotplug driver acpiphp_glue: Slot 2 already registered by another hotplug driver acpiphp_glue: Slot 2 already registered by another hotplug driver pci-stub: invalid id string "" input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] registering netback hpet_acpi_add: no address or irqs in _CRS Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 2996 ata2: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00180 irq 2996 ata3: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00200 irq 2996 ata4: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00280 irq 2996 ata5: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00300 irq 2996 ata6: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00380 irq 2996 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32.9 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb1a01000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver xen_allocate_pirq: returning irq 16 for gsi 16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020e0 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x000020c0 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 19 for gsi 19 Already setup the GSI :19 uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x000020a0 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 23 for gsi 23 Already setup the GSI :23 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 19 for gsi 19 Already setup the GSI :19 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 18 for gsi 18 Already setup the GSI :18 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 2:902:788 pci 0000:00:16.6: hash matches rtc_cmos 00:03: setting system clock to 2010-03-16 14:45:05 UTC (1268750705) Initalizing network drop monitor service ata2: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) usb 7-1: new low speed USB device using uhci_hcd and address 2 ====================================================== [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] 2.6.32.9 #1 ------------------------------------------------------ khubd/100 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (&retval->lock){......}, at: [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 and this task is already holding: (&uhci->lock){..-...}, at: [<ffffffff8137aedd>] uhci_urb_enqueue+0x46/0x7e3 which would create a new lock dependency: (&uhci->lock){..-...} -> (&retval->lock){......} but this new dependency connects a SOFTIRQ-irq-safe lock: (&uhci->lock){..-...} ... which became SOFTIRQ-irq-safe at: [<ffffffff8108ea6d>] __lock_acquire+0x2d2/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a [<ffffffff8135a479>] rh_timer_func+0xe/0x10 [<ffffffff810693bd>] run_timer_softirq+0x1a6/0x257 [<ffffffff810627e4>] __do_softirq+0xe6/0x1bc [<ffffffff81013fac>] call_softirq+0x1c/0x30 [<ffffffff81015794>] do_softirq+0x4b/0xa7 [<ffffffff81062229>] irq_exit+0x4a/0x89 [<ffffffff812bf9d9>] xen_evtchn_do_upcall+0x156/0x172 [<ffffffff81013ffe>] xen_do_hypervisor_callback+0x1e/0x30 to a SOFTIRQ-irq-unsafe lock: (purge_lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: ... [<ffffffff8108eadc>] __lock_acquire+0x341/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] _spin_lock+0x36/0x6b [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 [<ffffffff8110c161>] vmap_page_range+0xe/0x10 [<ffffffff8110c197>] map_vm_area+0x34/0x47 [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d [<ffffffff819c1d99>] start_kernel+0x3de/0x426 [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2 [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 other info that might help us debug this: 2 locks held by khubd/100: #0: (usb_address0_mutex){+.+...}, at: [<ffffffff81354f5f>] hub_port_init+0x81/0x7e4 #1: (&uhci->lock){..-...}, at: [<ffffffff8137aedd>] uhci_urb_enqueue+0x46/0x7e3 the dependencies between SOFTIRQ-irq-safe lock and the holding lock: -> (&uhci->lock){..-...} ops: 0 { IN-SOFTIRQ-W at: [<ffffffff8108ea6d>] __lock_acquire+0x2d2/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a [<ffffffff8135a479>] rh_timer_func+0xe/0x10 [<ffffffff810693bd>] run_timer_softirq+0x1a6/0x257 [<ffffffff810627e4>] __do_softirq+0xe6/0x1bc [<ffffffff81013fac>] call_softirq+0x1c/0x30 [<ffffffff81015794>] do_softirq+0x4b/0xa7 [<ffffffff81062229>] irq_exit+0x4a/0x89 [<ffffffff812bf9d9>] xen_evtchn_do_upcall+0x156/0x172 [<ffffffff81013ffe>] xen_do_hypervisor_callback+0x1e/0x30 INITIAL USE at: [<ffffffff8108eb29>] __lock_acquire+0x38e/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 [<ffffffff8137c3d7>] uhci_hub_control+0x74/0x401 [<ffffffff8135bdac>] usb_hcd_submit_urb+0x7a6/0xa1e [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113 [<ffffffff81358922>] hub_probe+0x37c/0xfaa [<ffffffff81360a35>] usb_probe_interface+0x15a/0x1f7 [<ffffffff81307635>] driver_probe_device+0xf8/0x218 [<ffffffff813077fa>] __device_attach+0x28/0x31 [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 [<ffffffff81307891>] device_attach+0x65/0x7c [<ffffffff8130667e>] bus_probe_device+0x27/0x3e [<ffffffff813045b3>] device_add+0x3ab/0x57d [<ffffffff8135e3ca>] usb_set_configuration+0x5b9/0x677 [<ffffffff81367b85>] generic_probe+0x67/0xae [<ffffffff813607b1>] usb_probe_device+0x7f/0x87 [<ffffffff81307635>] driver_probe_device+0xf8/0x218 [<ffffffff813077fa>] __device_attach+0x28/0x31 [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 [<ffffffff81307891>] device_attach+0x65/0x7c [<ffffffff8130667e>] bus_probe_device+0x27/0x3e [<ffffffff813045b3>] device_add+0x3ab/0x57d [<ffffffff8135616e>] usb_new_device+0x154/0x201 [<ffffffff8135b42e>] usb_add_hcd+0x4c5/0x69d [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 [<ffffffff81307635>] driver_probe_device+0xf8/0x218 [<ffffffff813077ae>] __driver_attach+0x59/0x7d [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 [<ffffffff813073fd>] driver_attach+0x21/0x23 [<ffffffff81306487>] bus_add_driver+0xe1/0x26b [<ffffffff81307ad5>] driver_register+0xa3/0x11a [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 [<ffffffff819f403b>] uhci_hcd_init+0x88/0xc1 [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b [<ffffffff819c1961>] kernel_init+0x172/0x1cc [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key at: [<ffffffff8268de38>] __key.33456+0x0/0x8 ... acquired at: [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 [<ffffffff8108f128>] __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>] uhci_alloc_qh+0x33/0x146 [<ffffffff8137af66>] uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>] usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113 [<ffffffff813551fb>] hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] hub_events+0x91e/0x11a2 [<ffffffff81358432>] hub_thread+0x25/0x199 [<ffffffff8107b8fd>] kthread+0x6e/0x76 [<ffffffff81013eaa>] child_rip+0xa/0x20 the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: -> (purge_lock){+.+...} ops: 0 { HARDIRQ-ON-W at: [<ffffffff8108eaba>] __lock_acquire+0x31f/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] _spin_lock+0x36/0x6b [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 [<ffffffff8110c161>] vmap_page_range+0xe/0x10 [<ffffffff8110c197>] map_vm_area+0x34/0x47 [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d [<ffffffff819c1d99>] start_kernel+0x3de/0x426 [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2 [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 SOFTIRQ-ON-W at: [<ffffffff8108eadc>] __lock_acquire+0x341/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] _spin_lock+0x36/0x6b [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 [<ffffffff8110c161>] vmap_page_range+0xe/0x10 [<ffffffff8110c197>] map_vm_area+0x34/0x47 [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d [<ffffffff819c1d99>] start_kernel+0x3de/0x426 [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2 [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 INITIAL USE at: [<ffffffff8108eb29>] __lock_acquire+0x38e/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] _spin_lock+0x36/0x6b [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 [<ffffffff8110c161>] vmap_page_range+0xe/0x10 [<ffffffff8110c197>] map_vm_area+0x34/0x47 [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d [<ffffffff819c1d99>] start_kernel+0x3de/0x426 [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2 [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 } ... key at: [<ffffffff81741ef8>] purge_lock.27226+0x18/0x40 ... acquired at: [<ffffffff8108f20c>] __lock_acquire+0xa71/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] _spin_lock+0x36/0x6b [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 [<ffffffff8100d7ca>] xen_create_contiguous_region+0x51/0x106 [<ffffffff81250d84>] xen_swiotlb_alloc_coherent+0x62/0xa6 [<ffffffff8111188c>] dma_pool_alloc+0x136/0x2a8 [<ffffffff81370efe>] ehci_qh_alloc+0x44/0x107 [<ffffffff81373f5d>] ehci_pci_setup+0x22a/0x9c1 [<ffffffff8135b18e>] usb_add_hcd+0x225/0x69d [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 [<ffffffff81307635>] driver_probe_device+0xf8/0x218 [<ffffffff813077ae>] __driver_attach+0x59/0x7d [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 [<ffffffff813073fd>] driver_attach+0x21/0x23 [<ffffffff81306487>] bus_add_driver+0xe1/0x26b [<ffffffff81307ad5>] driver_register+0xa3/0x11a [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 [<ffffffff819f3ee0>] ehci_hcd_init+0x7f/0xc0 [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b [<ffffffff819c1961>] kernel_init+0x172/0x1cc [<ffffffff81013eaa>] child_rip+0xa/0x20 -> (&retval->lock){......} ops: 0 { INITIAL USE at: [<ffffffff8108eb29>] __lock_acquire+0x38e/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 [<ffffffff81370efe>] ehci_qh_alloc+0x44/0x107 [<ffffffff81373f5d>] ehci_pci_setup+0x22a/0x9c1 [<ffffffff8135b18e>] usb_add_hcd+0x225/0x69d [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 [<ffffffff81307635>] driver_probe_device+0xf8/0x218 [<ffffffff813077ae>] __driver_attach+0x59/0x7d [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 [<ffffffff813073fd>] driver_attach+0x21/0x23 [<ffffffff81306487>] bus_add_driver+0xe1/0x26b [<ffffffff81307ad5>] driver_register+0xa3/0x11a [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 [<ffffffff819f3ee0>] ehci_hcd_init+0x7f/0xc0 [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b [<ffffffff819c1961>] kernel_init+0x172/0x1cc [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key at: [<ffffffff824dc3c4>] __key.24188+0x0/0x1c ... acquired at: [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 [<ffffffff8108f128>] __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>] uhci_alloc_qh+0x33/0x146 [<ffffffff8137af66>] uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>] usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113 [<ffffffff813551fb>] hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] hub_events+0x91e/0x11a2 [<ffffffff81358432>] hub_thread+0x25/0x199 [<ffffffff8107b8fd>] kthread+0x6e/0x76 [<ffffffff81013eaa>] child_rip+0xa/0x20 stack backtrace: Pid: 100, comm: khubd Not tainted 2.6.32.9 #1 Call Trace: [<ffffffff8108cd50>] check_usage+0x331/0x345 [<ffffffff81032d79>] ? pvclock_clocksource_read+0x47/0x80 [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 [<ffffffff8108f128>] __lock_acquire+0x98d/0xc07 [<ffffffff8111008c>] ? sys_swapoff+0x870/0x9d0 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff8111178c>] ? dma_pool_alloc+0x36/0x2a8 [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] ? dma_pool_alloc+0x36/0x2a8 [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 [<ffffffff8111a986>] ? init_object+0x73/0x7b [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf [<ffffffff8100f452>] ? check_events+0x12/0x20 [<ffffffff8137aa7b>] uhci_alloc_qh+0x33/0x146 [<ffffffff8111dda9>] ? kmem_cache_alloc+0xd9/0x150 [<ffffffff8137af66>] uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135a29c>] ? dma_map_single_attrs+0xb4/0xc6 [<ffffffff8135be92>] usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf [<ffffffff8100f452>] ? check_events+0x12/0x20 [<ffffffff8108b9ea>] ? lockdep_init_map+0x9f/0x115 [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1 [<ffffffff8107beb6>] ? __init_waitqueue_head+0x3a/0x4c [<ffffffff8135d51f>] usb_start_wait_urb+0x54/0x1b1 [<ffffffff8100f452>] ? check_events+0x12/0x20 [<ffffffff8135c939>] ? usb_alloc_urb+0x21/0x4b [<ffffffff8135c907>] ? usb_init_urb+0x2a/0x3b [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113 [<ffffffff8111c5ef>] ? kmem_cache_alloc_notrace+0xe8/0x111 [<ffffffff8135517a>] ? hub_port_init+0x29c/0x7e4 [<ffffffff813551fb>] hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] hub_events+0x91e/0x11a2 [<ffffffff8135840d>] ? hub_thread+0x0/0x199 [<ffffffff81358432>] hub_thread+0x25/0x199 [<ffffffff8107bb4f>] ? autoremove_wake_function+0x0/0x3d [<ffffffff8107b8fd>] kthread+0x6e/0x76 [<ffffffff81013eaa>] child_rip+0xa/0x20 [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc [<ffffffff81013810>] ? restore_args+0x0/0x30 [<ffffffff8107b9f2>] ? kthreadd+0xed/0x10f [<ffffffff81013ea0>] ? child_rip+0x0/0x20 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA, max UDMA/133 ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 3396k freed Write protecting the kernel read-only data: 6988k Red Hat nash version 5.1.19.6 starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. usb 7-1: New USB device found, idVendor=0458, idProduct=0007 usb 7-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 usb 7-1: Product: Optical Mouse usb 7-1: Manufacturer: KYE usb 7-1: configuration #1 chosen from 1 choice input: KYE Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input3 generic-usb 0003:0458:0007.0001: input,hidraw0: USB HID v1.10 Mouse [KYE Optical Mouse] on usb-0000:00:1d.1-1/input0 Creating block device nodes. Loading aacraid.ko module Adaptec aacraid driver 1.1-5[2461]-ms Scanning and configuring dmraid supported devices Scanning logical volumes Reading all physical volumes. This may take a while... Activating logical volumes Volume group "VolGroup01" not found Trying to resume from /dev/VolGroup01/LogVol01 Unable to access resume device (/dev/VolGroup01/LogVol01) Creating root device. Mounting root filesystem. mount: could not find filesystem '/dev/root' Setting up other filesystems. Setting up new root fs setuproot: moving /dev failed: No such file or directory no fstab.sys, mounting internal defaults setuproot: error mounting /proc: No such file or directory setuproot: error mounting /sys: No such file or directory Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys switchroot: mount failed: No such file or directory init used greatest stack depth: 4088 bytes left Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.32.9 #1 Call Trace: [<ffffffff8105b73f>] panic+0xa5/0x167 [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf [<ffffffff8105f2ab>] ? do_exit+0x38a/0x701 [<ffffffff8100f43f>] ? xen_restore_fl_direct_end+0x0/0x1 [<ffffffff8108f81b>] ? lock_release+0x179/0x184 [<ffffffff8108ca1d>] ? trace_hardirqs_on+0xd/0xf [<ffffffff81484fcf>] ? _write_unlock_irq+0x37/0x3c [<ffffffff8105ef9f>] do_exit+0x7e/0x701 [<ffffffff8105f6be>] sys_exit_group+0x0/0x1b [<ffffffff8105f6d5>] sys_exit_group+0x17/0x1b [<ffffffff81012d72>] system_call_fastpath+0x16/0x1b ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-16 22:03 ` Pasi Kärkkäinen @ 2010-03-16 22:22 ` kishore kumar 2010-03-16 22:29 ` Re: [Xen-users] " Pasi Kärkkäinen 0 siblings, 1 reply; 32+ messages in thread From: kishore kumar @ 2010-03-16 22:22 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users [-- Attachment #1.1: Type: text/plain, Size: 65737 bytes --] attached is the log captured in with the word document . On Tue, Mar 16, 2010 at 3:03 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote: > On Tue, Mar 16, 2010 at 02:56:06PM -0700, kishore kumar wrote: > > Please find the attached log file after fixing the dom 0 kernel cmd > line > > as below > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen > nomodeset > > > > There's something wrong with the log, the dom0 kernel parts are all on one > line.. > It's really difficult to read it. > > -- Pasi > > > Thanks > > > > > > On Tue, Mar 16, 2010 at 2:29 PM, Pasi Kärkkäinen <[1]pasik@iki.fi> > wrote: > > > > On Tue, Mar 16, 2010 at 02:16:22PM -0700, kishore kumar wrote: > > > I did below steps. > > > > > > > > > I pulled DOM 0 kernel from > > > git clone > > git://[1][2]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > linux-2.6-xen > > > > > > cd linux-2.6-xen > > > > > > make clean > > > > > > cp -a .config .config-old > > > > > > wget -O .config > > > > > [2][3] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > make oldconfig > > > > > > make bzImage > > > > > > make modules > > > > > > make modules_install > > > > > > cp -a .config /boot/config-2.6.32.9 > > > > > > cp -a System.map /boot/System.map-2.6.32.9 > > > > > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.9 > > > > > > and modified the grub.conf as below > > > > > > > > > Root(hd0,0) > > > > > > kernel /xen.gz console=vga,com1 com1=115200,8n1 msi=1 iommu=1 > > > > > > module /vmlinuz-2.6.32.9 ro root=/dev/VolGroup01/LogVo100 > rhgb > > quiet > > > > > > module /initrd-2.6.32.9.img > > > > > > > > > and rebooted the machine. Then It booted with some xen > messages > > and > > > stopped. Those were the messages captured from serial console. > > > > > > Please let me know if I did something wrong here. > > > > > > > Please fix the kernel cmdline based on my earlier email, and capture > and > > post the > > serial console log again! > > > > -- Pasi > > > > > > > > > On Tue, Mar 16, 2010 at 1:20 PM, Pasi Kärkkäinen > > <[3][4]pasik@iki.fi> wrote: > > > > > > On Tue, Mar 16, 2010 at 01:16:28PM -0700, Jeremy Fitzhardinge > > wrote: > > > > On 03/16/2010 12:48 PM, Pasi Kärkkäinen wrote: > > > >> On Tue, Mar 16, 2010 at 09:43:44PM +0200, Pasi Kärkkäinen > > wrote: > > > >> > > > >>> On Tue, Mar 16, 2010 at 10:32:17AM -0700, kishore kumar > > wrote: > > > >>> > > > >>>> Attached is the output captured from serial console. > > > >>>> > > > >>>> Machine does not boot after compiling xen 3.4.3 with > > pv_ops dom > > > 0 kernel. > > > >>>> > > > >>>> Please let me know what is going wrong here. > > > >>>> > > > >>>> > > > >>> Ok this looks like a bug that is already being sorted out > on > > > xen-devel mailinglist. > > > >>> I added CC to xen-devel. > > > >>> > > > >>> > > > >> > > > > > > > > Those messages are not a problem in themselves, but the > related > > > problem > > > > is believed to be fixed in current xen/stable-2.6.32.x. It > > looks like > > > > the output stops there because the Xen console isn't set up > > properly > > > for > > > > some reason. > > > > > > > > > > Yeah, remove "rhgb quiet" from the options.. the dom0 kernel > > cmdline > > > should be like this: > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen > > nomodeset > > > -- Pasi > > > > > > References > > > > > > Visible links > > > 1. [5] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 2. > > [6] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 3. mailto:[7]pasik@iki.fi > > > > References > > > > Visible links > > 1. mailto:pasik@iki.fi > > 2. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 3. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 4. mailto:pasik@iki.fi > > 5. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 6. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 7. mailto:pasik@iki.fi > > > Asserting Post complete GPIO!!! > > Transfer control to CSM 16-bit binary for legacy boot > > __ __ _____ _ _ _____ _ _ > > \ \/ /___ _ __ |___ /| || | |___ / _ __ ___| || | _ __ _ __ > ___ > > \ // _ \ '_ \ |_ \| || |_ |_ \ __| '__/ __| || |_ __| '_ \| '__/ > _ \ > > / \ __/ | | | ___) |__ _| ___) |__| | | (__|__ _|__| |_) | | | > __/ > > /_/\_\___|_| |_| |____(_) |_|(_)____/ |_| \___| |_| | .__/|_| > \___| > > |_| > > (XEN) Xen version 3.4.3-rc4-pre (kishore@localdomain) (gcc version 4.1.2 > 20080704 (Red Hat 4.1.2-46)) Mon Mar 15 13:44:31 PDT 2010 > > (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 2010 +0000 19924:6e72f8c3c017 > > (XEN) Command line: console=vga,com1 com1=115200,8n1 msi=1 iommu=1 > > (XEN) Video information: > > (XEN) VGA is text mode 80x25, font 8x16 > > (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds > > (XEN) EDID info not retrieved because no DDC retrieval method detected > > (XEN) Disc information: > > (XEN) Found 1 MBR signatures > > (XEN) Found 1 EDD information structures > > (XEN) Xen-e820 RAM map: > > (XEN) 0000000000000000 - 000000000009d000 (usable) > > (XEN) 000000000009d000 - 00000000000a0000 (reserved) > > (XEN) 00000000000e0000 - 0000000000100000 (reserved) > > (XEN) 0000000000100000 - 000000006d597000 (usable) > > (XEN) 000000006d597000 - 000000006d686000 (reserved) > > (XEN) 000000006d686000 - 000000006f598000 (usable) > > (XEN) 000000006f598000 - 000000006f59a000 (reserved) > > (XEN) 000000006f59a000 - 000000006f5af000 (ACPI NVS) > > (XEN) 000000006f5af000 - 000000006f5d9000 (reserved) > > (XEN) 000000006f5d9000 - 000000006f5f9000 (ACPI data) > > (XEN) 000000006f5f9000 - 000000006f6df000 (ACPI NVS) > > (XEN) 000000006f6df000 - 000000006f700000 (ACPI data) > > (XEN) 000000006f700000 - 0000000080000000 (reserved) > > (XEN) 00000000a0000000 - 00000000b0000000 (reserved) > > (XEN) 00000000fc000000 - 00000000fd000000 (reserved) > > (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) > > (XEN) 00000000ffc00000 - 0000000100000000 (reserved) > > (XEN) System RAM: 1780MB (1823000kB) > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL ) > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL THRLY 0 > 1000013) > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL THRLY 0 MSFT > 100000D) > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL THRLY 3 MSFT > 100000D) > > (XEN) ACPI: FACS 6F5F9000, 0040 > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL THRLY 0 MSFT > 100000D) > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL THRLY 1 MSFT > 100000D) > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL THRLY 1 MSFT > 100000D) > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL THRLY 1 MSFT > 100000D) > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL THRLY 0 MSFT > 100000D) > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 INTEL SSDT PM 4000 INTL > 20061109) > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL THRLY 1 MSFT > 100000D) > > (XEN) Domain heap initialised > > (XEN) Processor #0 6:12 APIC version 21 > > (XEN) Processor #2 6:12 APIC version 21 > > (XEN) Processor #4 6:12 APIC version 21 > > (XEN) Processor #16 6:12 APIC version 21 > > (XEN) Processor #18 6:12 APIC version 21 > > (XEN) Processor #20 6:12 APIC version 21 > > (XEN) Processor #1 6:12 APIC version 21 > > (XEN) Processor #3 6:12 APIC version 21 > > (XEN) Processor #5 6:12 APIC version 21 > > (XEN) Processor #17 6:12 APIC version 21 > > (XEN) Processor #19 6:12 APIC version 21 > > (XEN) Processor #21 6:12 APIC version 21 > > (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > > (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec90000, GSI 24-47 > > (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs > > (XEN) Intel VT-d DMAR tables have been parsed. > > (XEN) Using scheduler: SMP Credit Scheduler (credit) > > (XEN) Detected 3200.207 MHz processor. > > (XEN) VMX: Supported advanced features: > > (XEN) - APIC MMIO access virtualisation > > (XEN) - APIC TPR shadow > > (XEN) - Extended Page Tables (EPT) > > (XEN) - Virtual-Processor Identifiers (VPID) > > (XEN) - Virtual NMI > > (XEN) - MSR direct-access bitmap > > (XEN) VMX: EPT is available. > > (XEN) VMX: VPID is available. > > (XEN) HVM: VMX enabled > > (XEN) HVM: Hardware Assisted Paging detected. > > (XEN) CPU0: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 1/2 eip 88000 > > (XEN) CPU1: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 2/4 eip 88000 > > (XEN) CPU2: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 3/16 eip 88000 > > (XEN) CPU3: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 4/18 eip 88000 > > (XEN) CPU4: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 5/20 eip 88000 > > (XEN) CPU5: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 6/1 eip 88000 > > (XEN) CPU6: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 7/3 eip 88000 > > (XEN) CPU7: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 8/5 eip 88000 > > (XEN) CPU8: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 9/17 eip 88000 > > (XEN) CPU9: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 10/19 eip 88000 > > (XEN) CPU10: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 11/21 eip 88000 > > (XEN) CPU11: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Total of 12 processors activated. > > (XEN) ENABLING IO-APIC IRQs > > (XEN) -> Using new ACK method > > (XEN) checking TSC synchronization across 12 CPUs: passed. > > (XEN) Platform timer is 14.318MHz HPET > > ?(XEN) Brought up 12 CPUs > > (XEN) Intel VT-d Snoop Control supported. > > (XEN) Intel VT-d DMA Passthrough not supported. > > (XEN) Intel VT-d Queued Invalidation supported. > > (XEN) Intel VT-d Interrupt Remapping supported. > > (XEN) I/O virtualisation enabled > > (XEN) I/O virtualisation for PV guests disabled > > (XEN) xenoprof: Initialization failed. Intel processor model 44 for P6 > class family is not supported > > (XEN) *** LOADING DOMAIN 0 *** > > (XEN) Xen kernel: 64-bit, lsb, compat32 > > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x26bb000 > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > (XEN) Dom0 alloc.: 0000000064000000->0000000068000000 (404490 pages to > be allocated) > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > (XEN) Loaded kernel: ffffffff81000000->ffffffff826bb000 > > (XEN) Init. ramdisk: ffffffff826bb000->ffffffff82d0d800 > > (XEN) Phys-Mach map: ffffffff82d0e000->ffffffff83044050 > > (XEN) Start info: ffffffff83045000->ffffffff830454b4 > > (XEN) Page tables: ffffffff83046000->ffffffff83063000 > > (XEN) Boot stack: ffffffff83063000->ffffffff83064000 > > (XEN) TOTAL: ffffffff80000000->ffffffff83400000 > > (XEN) ENTRY ADDRESS: ffffffff819c1200 > > (XEN) Dom0 has maximum 12 VCPUs > > (XEN) Scrubbing Free RAM: .done. > > (XEN) Xen trace buffers: disabled > > (XEN) Std. Loglevel: Errors and warnings > > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) > > (XEN) Xen is relinquishing VGA console. > > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input > to Xen) > > (XEN) Freed 128kB init memory. > > mapping kernel into physical memory > > Xen: setup ISA identity maps > > about to get started... > > Initializing cgroup subsys cpuset > > Initializing cgroup subsys cpu > > Linux version 2.6.32.9 (kishore@localhost.localdomain) (gcc version > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 15 15:16:28 PDT 2010 > > Command line: ro root=/dev/VolGroup01/LogVol00 console=hvc0 > earlyprintk=xen nomodeset > > KERNEL supported cpus: > > Intel GenuineIntel > > AMD AuthenticAMD > > Centaur CentaurHauls > > BIOS-provided physical RAM map: > > Xen: 0000000000000000 - 000000000009d000 (usable) > > Xen: 000000000009d000 - 0000000000100000 (reserved) > > Xen: 0000000000100000 - 0000000066c0a000 (usable) > > Xen: 000000006d597000 - 000000006d686000 (reserved) > > Xen: 000000006f598000 - 000000006f59a000 (reserved) > > Xen: 000000006f59a000 - 000000006f5af000 (ACPI NVS) > > Xen: 000000006f5af000 - 000000006f5d9000 (reserved) > > Xen: 000000006f5d9000 - 000000006f5f9000 (ACPI data) > > Xen: 000000006f5f9000 - 000000006f6df000 (ACPI NVS) > > Xen: 000000006f6df000 - 000000006f700000 (ACPI data) > > Xen: 000000006f700000 - 0000000080000000 (reserved) > > Xen: 00000000a0000000 - 00000000b0000000 (reserved) > > Xen: 00000000fc000000 - 00000000fd000000 (reserved) > > Xen: 00000000fed1c000 - 00000000fed20000 (reserved) > > Xen: 00000000ffc00000 - 0000000100000000 (reserved) > > bootconsole [xenboot0] enabled > > DMI 2.4 present. > > last_pfn = 0x66c0a max_arch_pfn = 0x400000000 > > init_memory_mapping: 0000000000000000-0000000066c0a000 > > RAMDISK: 026bb000 - 02d0d800 > > ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL ) > > ACPI: XSDT 000000006f6fe120 00064 (v01 INTEL THRLY 00000000 > 01000013) > > ACPI: FACP 000000006f6fd000 000F4 (v04 INTEL THRLY 00000000 MSFT > 0100000D) > > ACPI: DSDT 000000006f6f5000 074F1 (v02 INTEL THRLY 00000003 MSFT > 0100000D) > > ACPI: FACS 000000006f5f9000 00040 > > ACPI: APIC 000000006f6f4000 001CC (v02 INTEL THRLY 00000000 MSFT > 0100000D) > > ACPI: MCFG 000000006f6f3000 0003C (v01 INTEL THRLY 00000001 MSFT > 0100000D) > > ACPI: HPET 000000006f6f2000 00038 (v01 INTEL THRLY 00000001 MSFT > 0100000D) > > ACPI: SLIT 000000006f6f1000 00030 (v01 INTEL THRLY 00000001 MSFT > 0100000D) > > ACPI: WDDT 000000006f6f0000 00040 (v01 INTEL THRLY 00000000 MSFT > 0100000D) > > ACPI: SSDT 000000006f5d9000 1FDDC (v01 INTEL SSDT PM 00004000 INTL > 20061109) > > ACPI: 000000006f6ee000 001D0 (v01 INTEL THRLY 00000001 MSFT > 0100000D) > > No NUMA configuration found > > Faking a node at 0000000000000000-0000000066c0a000 > > Bootmem setup node 0 0000000000000000-0000000066c0a000 > > NODE_DATA [0000000000008000 - 000000000001ffff] > > bootmap [0000000000020000 - 000000000002cd87] pages d > > (9 early reservations) ==> bootmem [0000000000 - 0066c0a000] > > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - > 0000001000] > > #1 [0003046000 - 0003063000] XEN PAGETABLES ==> [0003046000 - > 0003063000] > > #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - > 0000008000] > > #3 [0001000000 - 000269ae98] TEXT DATA BSS ==> [0001000000 - > 000269ae98] > > #4 [00026bb000 - 0002d0d800] RAMDISK ==> [00026bb000 - > 0002d0d800] > > #5 [0002d0e000 - 0003046000] XEN START INFO ==> [0002d0e000 - > 0003046000] > > #6 [000269b000 - 000269b011] BRK ==> [000269b000 - > 000269b011] > > #7 [0000100000 - 000041a000] PGTABLE ==> [0000100000 - > 000041a000] > > #8 [0000001000 - 0000001030] ACPI SLIT ==> [0000001000 - > 0000001030] > > found SMP MP-table at [ffff8800000fd750] fd750 > > Zone PFN ranges: > > DMA 0x00000000 -> 0x00001000 > > DMA32 0x00001000 -> 0x00100000 > > Normal 0x00100000 -> 0x00100000 > > Movable zone start PFN for each node > > early_node_map[2] active PFN ranges > > 0: 0x00000000 -> 0x0000009d > > 0: 0x00000100 -> 0x00066c0a > > ACPI: PM-Timer IO Port: 0x408 > > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) > > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled) > > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled) > > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) > > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] enabled) > > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) > > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] enabled) > > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled) > > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled) > > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled) > > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) > > ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1]) > > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > > IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 > > ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24]) > > IOAPIC[1]: apic_id 9, version 0, address 0xfec90000, GSI 24-24 > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > ERROR: Unable to locate IOAPIC for GSI 2 > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > > ERROR: Unable to locate IOAPIC for GSI 9 > > Using ACPI (MADT) for SMP configuration information > > ACPI: HPET id: 0x8086a401 base: 0xfed00000 > > SMP: Allowing 12 CPUs, 0 hotplug CPUs > > PM: Registered nosave memory: 000000000009d000 - 0000000000100000 > > Allocating PCI resources starting at b0000000 (gap: b0000000:4c000000) > > Booting paravirtualized kernel on Xen > > Xen version: 3.4.3-rc4-pre (preserve-AD) (dom0) > > NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1 > > PERCPU: Embedded 478 pages/cpu @ffff880005ebc000 s1928024 r8192 d21672 > u1957888 > > pcpu-alloc: s1928024 r8192 d21672 u1957888 alloc=478*4096 > > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 > > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 > > Xen: using vcpu_info placement > > Built 1 zonelists in Node order, mobility grouping on. Total pages: > 409291 > > Policy zone: DMA32 > > Kernel command line: ro root=/dev/VolGroup01/LogVol00 console=hvc0 > earlyprintk=xen nomodeset > > PID hash table entries: 4096 (order: 3, 32768 bytes) > > Initializing CPU#0 > > DMA: Placing 64MB software IO TLB between ffff880007525000 - > ffff88000b525000 > > DMA: software IO TLB at phys 0x7525000 - 0xb525000 > > xen_swiotlb_fixup: buf=ffff880007525000 size=67108864 > > xen_swiotlb_fixup: buf=ffff88000b585000 size=32768 > > Memory: 1514268k/1683496k available (4654k kernel code, 396k absent, > 168832k reserved, 3443k data, 3396k init) > > SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 > > Hierarchical RCU implementation. > > NR_IRQS:4352 nr_irqs:3072 > > Already setup the GSI :0 > > Already setup the GSI :1 > > Already setup the GSI :2 > > Already setup the GSI :3 > > Already setup the GSI :4 > > Already setup the GSI :5 > > Already setup the GSI :6 > > Already setup the GSI :7 > > Already setup the GSI :8 > > Already setup the GSI :9 > > Already setup the GSI :10 > > Already setup the GSI :11 > > Already setup the GSI :12 > > Already setup the GSI :13 > > Already setup the GSI :14 > > Already setup the GSI :15 > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > > xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 > > xen_allocate_pirq: returning irq 9 for gsi 9 > > Already setup the GSI :9 > > xen: acpi sci 9 > > Console: colour VGA+ 80x25 > > console [hvc0] enabled, bootconsole disabled console [hvc0] enabled, > bootconsole disabled > > Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar > ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... > MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... > MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... > CHAINHASH_SIZE: 16384 memory used by lock dependency info: 6367 kB > per task-struct memory footprint: 2688 bytes allocated 17039360 bytes of > page_cgroup please try 'cgroup_disable=memory' option if you don't want > memory cgroups installing Xen timer for CPU 0 Detected 3200.206 MHz > processor. Calibrating delay loop (skipped), value calculated using timer > frequency.. 6400.41 BogoMIPS (lpj=3200206) Security Framework initialized > SELinux: Initializing. Dentry cache hash table entries: 262144 (order: 9, > 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 > bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns > Initializing cgroup subsys cpuacct Initializing cgroup subsys memory > Initializing cgroup subsys devices Initializing cgroup subsys freezer > Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU: > Unsupported number of siblings 32 Performance Events: unsupported p6 CPU > model 44 no PMU driver, software events only. lockdep: fixing up > alternatives. SMP alternatives: switching to UP code ACPI: Core revision > 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: > allocating 27971 entries in 110 pages installing Xen timer for CPU 1 > lockdep: fixing up alternatives. SMP alternatives: switching to SMP code > Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K > CPU: L3 cache: 12288K CPU 1/0x0 -> Node 0 CPU: Unsupported number of > siblings 32 installing Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I > cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU > 2/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer > for CPU 3 Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 > cache: 256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node 0 CPU: Unsupported > number of siblings 32 installing Xen timer for CPU 4 Initializing CPU#4 CPU: > L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K > CPU 4/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen > timer for CPU 5 Initializing CPU#5 CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 5/0x0 -> Node 0 CPU: > Unsupported number of siblings 32 installing Xen timer for CPU 6 > Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K > CPU: L3 cache: 12288K CPU 6/0x0 -> Node 0 CPU: Unsupported number of > siblings 32 installing Xen timer for CPU 7 Initializing CPU#7 CPU: L1 I > cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU > 7/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen timer > for CPU 8 Initializing CPU#8 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 > cache: 256K CPU: L3 cache: 12288K CPU 8/0x0 -> Node 0 CPU: Unsupported > number of siblings 32 installing Xen timer for CPU 9 Initializing CPU#9 CPU: > L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K > CPU 9/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing Xen > timer for CPU 10 Initializing CPU#10 CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 10/0x0 -> Node 0 CPU: > Unsupported number of siblings 32 installing Xen timer for CPU 11 > Initializing CPU#11 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: > 256K CPU: L3 cache: 12288K CPU 11/0x0 -> Node 0 CPU: Unsupported number of > siblings 32 Brought up 12 CPUs Grant table initialized regulator: core > version 0.5 Time: 14:45:00 Date: 03/16/10 NET: Registered protocol family > 16 xenbus_probe_init ok ACPI FADT declares the system doesn't support PCIe > ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: > base a0000000 segment 0 buses 0 - 255 PCI: MCFG area at a0000000 reserved in > E820 PCI: Using MMCONFIG at a0000000 - afffffff PCI: Using configuration > type 1 for base access bio: create slab <bio-0> at 0 ACPI Error: Field > [CPB3] at 96 exceeds Buffer [NULL] size 64 (bits) (20090903/dsopcode-596) > ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node > ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI: Interpreter enabled ACPI: > (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI > Warning: Incorrect checksum in table [ ] - 97, should be DB > (20090903/tbutils-314) ACPI: No dock devices found. ACPI: PCI Root Bridge > [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci > 0000:00:01.0: PME# disabled pci 0000:00:02.0: PME# supported from D0 D3hot > D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from > D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:04.0: PME# > supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci > 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# > disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci > 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot > D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:08.0: PME# supported from > D0 D3hot D3cold pci 0000:00:08.0: PME# disabled pci 0000:00:09.0: PME# > supported from D0 D3hot D3cold pci 0000:00:09.0: PME# disabled pci > 0000:00:0a.0: PME# supported from D0 D3hot D3cold pci 0000:00:0a.0: PME# > disabled pci 0000:00:13.0: PME# supported from D0 D3hot D3cold pci > 0000:00:13.0: PME# disabled pci 0000:00:1a.7: PME# supported from D0 D3hot > D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1c.0: PME# supported from > D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# > supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci > 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# > disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci > 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f > claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f > claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at > 0680 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 > (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0600 (mask > 001f) pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# > disabled pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci > 0000:01:00.0: PME# disabled pci 0000:01:00.1: PME# supported from D0 D3hot > D3cold pci 0000:01:00.1: PME# disabled pci 0000:0c:00.0: disabling ASPM on > pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci > 0000:00:1e.0: transparent bridge ACPI: PCI Root Bridge [PCI1] (0000:fe) > ACPI: PCI Root Bridge [PCI2] (0000:ff) ACPI: PCI Interrupt Link [LNKA] (IRQs > 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 > 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 > 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, > disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, > disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) > xenbus_probe_backend_init bus registered ok xenbus_probe_frontend_init bus > registered ok xen_balloon: Initialising balloon driver with page order 0. > vgaarb: device added: PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none > vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface > driver usbfs usbcore: registered new interface driver hub usbcore: > registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: > Initializing NetLabel: domain hash size = 128 NetLabel: protocols = > UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching > to clocksource xen kstop/0 used greatest stack depth: 6568 bytes left > kstop/1 used greatest stack depth: 6536 bytes left pnp: PnP ACPI init ACPI: > bus type pnp registered xen_allocate_pirq: returning irq 8 for gsi 8 Already > setup the GSI :8 xen_allocate_pirq: returning irq 13 for gsi 13 Already > setup the GSI :13 pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp > unregistered system 00:07: ioport range 0x500-0x53f has been reserved system > 00:07: ioport range 0x400-0x47f has been reserved system 00:07: ioport range > 0x800-0x81f has been reserved system 00:07: ioport range 0x2f8-0x2ff has > been reserved system 00:07: iomem range 0xfed1c000-0xfed8bffe could not be > reserved system 00:07: iomem range 0xff000000-0xffffffff could not be > reserved system 00:07: iomem range 0xfee00000-0xfeefffff has been reserved > system 00:07: iomem range 0xfe900000-0xfe90001f has been reserved system > 00:07: iomem range 0xfea00000-0xfea0001f has been reserved system 00:07: > iomem range 0xfed1b000-0xfed1bfff has been reserved pci 0000:0c:00.0: BAR 6: > no parent found for of device [0xffff0000-0xffffffff] pci 0000:00:01.0: PCI > bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x1000-0x1fff > pci 0000:00:01.0: MEM window: 0xb1900000-0xb19fffff pci 0000:00:01.0: > PREFETCH window: disabled pci 0000:00:02.0: PCI bridge, secondary bus > 0000:02 pci 0000:00:02.0: IO window: disabled pci 0000:00:02.0: MEM > window: disabled pci 0000:00:02.0: PREFETCH window: disabled pci > 0000:00:03.0: PCI bridge, secondary bus 0000:03 pci 0000:00:03.0: IO > window: disabled pci 0000:00:03.0: MEM window: disabled pci 0000:00:03.0: > PREFETCH window: disabled pci 0000:00:04.0: PCI bridge, secondary bus > 0000:04 pci 0000:00:04.0: IO window: disabled pci 0000:00:04.0: MEM > window: disabled pci 0000:00:04.0: PREFETCH window: disabled pci > 0000:00:05.0: PCI bridge, secondary bus 0000:05 pci 0000:00:05.0: IO > window: disabled pci 0000:00:05.0: MEM window: disabled pci 0000:00:05.0: > PREFETCH window: disabled pci 0000:00:06.0: PCI bridge, secondary bus > 0000:06 pci 0000:00:06.0: IO window: disabled pci 0000:00:06.0: MEM > window: disabled pci 0000:00:06.0: PREFETCH window: disabled pci > 0000:00:07.0: PCI bridge, secondary bus 0000:07 pci 0000:00:07.0: IO > window: disabled pci 0000:00:07.0: MEM window: disabled pci 0000:00:07.0: > PREFETCH window: disabled pci 0000:00:08.0: PCI bridge, secondary bus > 0000:08 pci 0000:00:08.0: IO window: disabled pci 0000:00:08.0: MEM > window: disabled pci 0000:00:08.0: PREFETCH window: disabled pci > 0000:00:09.0: PCI bridge, secondary bus 0000:09 pci 0000:00:09.0: IO > window: 0x3000-0x3fff pci 0000:00:09.0: MEM window: 0xb1b00000-0xb1cfffff > pci 0000:00:09.0: PREFETCH window: 0x000000b1d00000-0x000000b1efffff pci > 0000:00:0a.0: PCI bridge, secondary bus 0000:0a pci 0000:00:0a.0: IO > window: disabled pci 0000:00:0a.0: MEM window: disabled pci 0000:00:0a.0: > PREFETCH window: disabled pci 0000:00:1c.0: PCI bridge, secondary bus > 0000:0b pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM > window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci > 0000:00:1c.4: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.4: IO > window: disabled pci 0000:00:1c.4: MEM window: 0xb1000000-0xb18fffff pci > 0000:00:1c.4: PREFETCH window: 0x000000b0000000-0x000000b0ffffff pci > 0000:00:1c.5: PCI bridge, secondary bus 0000:0d pci 0000:00:1c.5: IO > window: disabled pci 0000:00:1c.5: MEM window: disabled pci 0000:00:1c.5: > PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus > 0000:0e pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM > window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci > 0000:00:01.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci 0000:00:02.0: > PCI INT A -> GSI 29 (level, low) -> IRQ 29 pci 0000:00:03.0: PCI INT A -> > GSI 24 (level, low) -> IRQ 24 pci 0000:00:04.0: PCI INT A -> GSI 25 (level, > low) -> IRQ 25 pci 0000:00:05.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 > pci 0000:00:06.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27 pci > 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 pci 0000:00:08.0: > PCI INT A -> GSI 31 (level, low) -> IRQ 31 pci 0000:00:09.0: PCI INT A -> > GSI 32 (level, low) -> IRQ 32 pci 0000:00:0a.0: PCI INT A -> GSI 33 (level, > low) -> IRQ 33 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > xen_allocate_pirq: returning irq 16 for gsi 16 Already setup the GSI :16 pci > 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: > PCI INT B -> GSI 17 (level, low) -> IRQ 17 NET: Registered protocol family 2 > IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP > established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind > hash table entries: 65536 (order: 10, 4718592 bytes) TCP: Hash tables > configured (established 262144 bind 65536) TCP reno registered NET: > Registered protocol family 1 pci 0000:01:00.0: Disabling L0s pci > 0000:01:00.1: Disabling L0s Trying to unpack rootfs image as initramfs... > Freeing initrd memory: 6474k freed DMA-API: preallocated 32768 debug entries > DMA-API: debugging enabled by kernel config PCI-DMA: Using software bounce > buffering for IO (SWIOTLB) DMA: Placing 64MB software IO TLB between > ffff880007525000 - ffff88000b525000 DMA: software IO TLB at phys 0x7525000 - > 0xb525000 audit: initializing netlink socket (disabled) type=2000 > audit(1268750702.035:1): initialized HugeTLB registered 2 MB page size, > pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table > entries: 512 (order 0, 4096 bytes) msgmni has been set to 2970 > cryptomgr_test used greatest stack depth: 5864 bytes left cryptomgr_test > used greatest stack depth: 5816 bytes left alg: No test for stdrng (krng) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io > scheduler noop registered io scheduler anticipatory registered io scheduler > deadline registered io scheduler cfq registered (default) pci_hotplug: PCI > Hot Plug PCI Core version: 0.5 pciehp 0000:00:09.0:pcie04: HPC vendor_id > 8086 device_id 3410 ss_vid 0 ss_did 0 pciehp: PCI Express Hot Plug > Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver > version: 0.5 acpiphp_glue: Slot 2 already registered by another hotplug > driver acpiphp_glue: Slot 2 already registered by another hotplug driver > acpiphp_glue: Slot 2 already registered by another hotplug driver > acpiphp_glue: Slot 2 already registered by another hotplug driver > acpiphp_glue: Slot 2 already registered by another hotplug driver > acpiphp_glue: Slot 2 already registered by another hotplug driver > acpiphp_glue: Slot 2 already registered by another hotplug driver > acpiphp_glue: Slot 2 already registered by another hotplug driver pci-stub: > invalid id string "" input: Sleep Button as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 ACPI: Sleep Button > [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > ACPI: Power Button [PWRF] registering netback hpet_acpi_add: no address or > irqs in _CRS Non-volatile memory driver v1.3 Linux agpgart interface v0.103 > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS1 at > I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded > input: Macintosh mouse button emulation as /devices/virtual/input/input2 > ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ahci > 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems > scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : > ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed > irq 2996 ata2: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00180 irq > 2996 ata3: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00200 irq > 2996 ata4: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00280 irq > 2996 ata5: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00300 irq > 2996 ata6: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00380 irq > 2996 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller > (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ > 18 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new > USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port > 1 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7: > USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, > idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: > Manufacturer: Linux 2.6.32.9 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 > usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found > hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 > (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd > 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd > 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb1a01000 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device > found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: > Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb > usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd usb usb2: SerialNumber: > 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: > USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host > Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface > driver xen_allocate_pirq: returning irq 16 for gsi 16 Already setup the GSI > :16 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB > bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base > 0x000020e0 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb > usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: > Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32.9 > uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 > chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports > detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB > bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base > 0x000020c0 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb > usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: > Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32.9 > uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 > chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports > detected xen_allocate_pirq: returning irq 19 for gsi 19 Already setup the > GSI :19 uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB > bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base > 0x000020a0 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb > usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: > Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32.9 > uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 > chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports > detected xen_allocate_pirq: returning irq 23 for gsi 23 Already setup the > GSI :23 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB > bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base > 0x00002080 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb > usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: > Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.32.9 > uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 usb usb6: configuration #1 > chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports > detected xen_allocate_pirq: returning irq 19 for gsi 19 Already setup the > GSI :19 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB > bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base > 0x00002060 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb > usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: > Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.32.9 > uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: configuration #1 > chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports > detected xen_allocate_pirq: returning irq 18 for gsi 18 Already setup the > GSI :18 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB > bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base > 0x00002040 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb > usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: > Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.32.9 > uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 > chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports > detected PNP: No PS/2 controller found. Probing ports directly. i8042.c: No > controller found. mice: PS/2 mouse device common for all mice rtc_cmos > 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as > rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram device-mapper: > uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) > initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: > using governor menu usbcore: registered new interface driver hiddev usbcore: > registered new interface driver usbhid usbhid: v2.6:USB HID core driver > nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is > deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel > parameter, acct=1 nf_conntrack module option or sysctl > net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 > Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket > NET: Registered protocol family 17 registered taskstats version 1 No TPM > chip found, activating TPM-bypass! Magic number: 2:902:788 pci > 0000:00:16.6: hash matches rtc_cmos 00:03: setting system clock to > 2010-03-16 14:45:05 UTC (1268750705) Initalizing network drop monitor > service ata2: SATA link down (SStatus 0 SControl 300) ata4: SATA link down > (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata5: > SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 > SControl 300) usb 7-1: new low speed USB device using uhci_hcd and address 2 > ====================================================== [ INFO: SOFTIRQ-safe > -> SOFTIRQ-unsafe lock order detected ] 2.6.32.9 #1 > ------------------------------------------------------ khubd/100 > [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (&retval->lock){......}, at: > [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 and this task is already > holding: (&uhci->lock){..-...}, at: [<ffffffff8137aedd>] > uhci_urb_enqueue+0x46/0x7e3 which would create a new lock dependency: > (&uhci->lock){..-...} -> (&retval->lock){......} but this new dependency > connects a SOFTIRQ-irq-safe lock: (&uhci->lock){..-...} ... which became > SOFTIRQ-irq-safe at: [<ffffffff8108ea6d>] __lock_acquire+0x2d2/0xc07 > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff81485526>] > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8137b6ac>] > uhci_hub_status_data+0x32/0x17c [<ffffffff8135a361>] > usb_hcd_poll_rh_status+0x50/0x15a [<ffffffff8135a479>] > rh_timer_func+0xe/0x10 [<ffffffff810693bd>] run_timer_softirq+0x1a6/0x257 > [<ffffffff810627e4>] __do_softirq+0xe6/0x1bc [<ffffffff81013fac>] > call_softirq+0x1c/0x30 [<ffffffff81015794>] do_softirq+0x4b/0xa7 > [<ffffffff81062229>] irq_exit+0x4a/0x89 [<ffffffff812bf9d9>] > xen_evtchn_do_upcall+0x156/0x172 [<ffffffff81013ffe>] > xen_do_hypervisor_callback+0x1e/0x30 to a SOFTIRQ-irq-unsafe lock: > (purge_lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: ... > [<ffffffff8108eadc>] __lock_acquire+0x341/0xc07 [<ffffffff8108f46f>] > lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] _spin_lock+0x36/0x6b > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 [<ffffffff8100e58c>] > xen_alloc_ptpage+0x51/0x82 [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 [<ffffffff8110bf76>] > vmap_page_range_noflush+0x9a/0x264 [<ffffffff8110c161>] > vmap_page_range+0xe/0x10 [<ffffffff8110c197>] map_vm_area+0x34/0x47 > [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d [<ffffffff8110c379>] > __vmalloc_node+0x82/0x91 [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 > [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d [<ffffffff819c1d99>] > start_kernel+0x3de/0x426 [<ffffffff819c12c3>] > x86_64_start_reservations+0xae/0xb2 [<ffffffff819c4d5d>] > xen_start_kernel+0x4b9/0x4c0 other info that might help us debug this: 2 > locks held by khubd/100: #0: (usb_address0_mutex){+.+...}, at: > [<ffffffff81354f5f>] hub_port_init+0x81/0x7e4 #1: (&uhci->lock){..-...}, > at: [<ffffffff8137aedd>] uhci_urb_enqueue+0x46/0x7e3 the dependencies > between SOFTIRQ-irq-safe lock and the holding lock: -> (&uhci->lock){..-...} > ops: 0 { IN-SOFTIRQ-W at: [<ffffffff8108ea6d>] > __lock_acquire+0x2d2/0xc07 [<ffffffff8108f46f>] > lock_acquire+0xcd/0xf2 [<ffffffff81485526>] > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8137b6ac>] > uhci_hub_status_data+0x32/0x17c [<ffffffff8135a361>] > usb_hcd_poll_rh_status+0x50/0x15a > [<ffffffff8135a479>] rh_timer_func+0xe/0x10 > [<ffffffff810693bd>] run_timer_softirq+0x1a6/0x257 > [<ffffffff810627e4>] __do_softirq+0xe6/0x1bc > [<ffffffff81013fac>] call_softirq+0x1c/0x30 > [<ffffffff81015794>] do_softirq+0x4b/0xa7 > [<ffffffff81062229>] irq_exit+0x4a/0x89 > [<ffffffff812bf9d9>] xen_evtchn_do_upcall+0x156/0x172 > [<ffffffff81013ffe>] xen_do_hypervisor_callback+0x1e/0x30 INITIAL USE > at: [<ffffffff8108eb29>] __lock_acquire+0x38e/0xc07 > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 > [<ffffffff8137c3d7>] uhci_hub_control+0x74/0x401 > [<ffffffff8135bdac>] usb_hcd_submit_urb+0x7a6/0xa1e > [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1 > [<ffffffff8135d51f>] usb_start_wait_urb+0x54/0x1b1 > [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113 > [<ffffffff81358922>] hub_probe+0x37c/0xfaa > [<ffffffff81360a35>] usb_probe_interface+0x15a/0x1f7 > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > [<ffffffff813077fa>] __device_attach+0x28/0x31 > [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 > [<ffffffff81307891>] device_attach+0x65/0x7c > [<ffffffff8130667e>] bus_probe_device+0x27/0x3e > [<ffffffff813045b3>] device_add+0x3ab/0x57d > [<ffffffff8135e3ca>] usb_set_configuration+0x5b9/0x677 > [<ffffffff81367b85>] generic_probe+0x67/0xae > [<ffffffff813607b1>] usb_probe_device+0x7f/0x87 > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > [<ffffffff813077fa>] __device_attach+0x28/0x31 > [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 > [<ffffffff81307891>] device_attach+0x65/0x7c > [<ffffffff8130667e>] bus_probe_device+0x27/0x3e > [<ffffffff813045b3>] device_add+0x3ab/0x57d > [<ffffffff8135616e>] usb_new_device+0x154/0x201 > [<ffffffff8135b42e>] usb_add_hcd+0x4c5/0x69d > [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 > [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b > [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > [<ffffffff813077ae>] __driver_attach+0x59/0x7d > [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 > [<ffffffff813073fd>] driver_attach+0x21/0x23 > [<ffffffff81306487>] bus_add_driver+0xe1/0x26b > [<ffffffff81307ad5>] driver_register+0xa3/0x11a > [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 > [<ffffffff819f403b>] uhci_hcd_init+0x88/0xc1 > [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > [<ffffffff819c1961>] kernel_init+0x172/0x1cc > [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key at: > [<ffffffff8268de38>] __key.33456+0x0/0x8 ... acquired at: > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 [<ffffffff8108f128>] > __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] > dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>] uhci_alloc_qh+0x33/0x146 > [<ffffffff8137af66>] uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>] > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>] > usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] > usb_control_msg+0xee/0x113 [<ffffffff813551fb>] hub_port_init+0x31d/0x7e4 > [<ffffffff81356d68>] hub_events+0x91e/0x11a2 [<ffffffff81358432>] > hub_thread+0x25/0x199 [<ffffffff8107b8fd>] kthread+0x6e/0x76 > [<ffffffff81013eaa>] child_rip+0xa/0x20 the dependencies between the lock > to be acquired and SOFTIRQ-irq-unsafe lock: -> (purge_lock){+.+...} ops: 0 > { HARDIRQ-ON-W at: [<ffffffff8108eaba>] > __lock_acquire+0x31f/0xc07 [<ffffffff8108f46f>] > lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] > _spin_lock+0x36/0x6b [<ffffffff8110aa20>] > __purge_vmap_area_lazy+0x54/0x18a > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 > [<ffffffff8110c197>] map_vm_area+0x34/0x47 > [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d > [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 > [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d > [<ffffffff819c1d99>] start_kernel+0x3de/0x426 > [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2 > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 SOFTIRQ-ON-W at: > [<ffffffff8108eadc>] __lock_acquire+0x341/0xc07 > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > [<ffffffff814853bc>] _spin_lock+0x36/0x6b > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 > [<ffffffff8110c197>] map_vm_area+0x34/0x47 > [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d > [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 > [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d > [<ffffffff819c1d99>] start_kernel+0x3de/0x426 > [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2 > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 INITIAL USE at: > [<ffffffff8108eb29>] __lock_acquire+0x38e/0xc07 > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > [<ffffffff814853bc>] _spin_lock+0x36/0x6b > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 > [<ffffffff8110c197>] map_vm_area+0x34/0x47 > [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d > [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 > [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d > [<ffffffff819c1d99>] start_kernel+0x3de/0x426 > [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2 > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 } ... key > at: [<ffffffff81741ef8>] purge_lock.27226+0x18/0x40 ... acquired at: > [<ffffffff8108f20c>] __lock_acquire+0xa71/0xc07 [<ffffffff8108f46f>] > lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] _spin_lock+0x36/0x6b > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 [<ffffffff8100d7ca>] > xen_create_contiguous_region+0x51/0x106 [<ffffffff81250d84>] > xen_swiotlb_alloc_coherent+0x62/0xa6 [<ffffffff8111188c>] > dma_pool_alloc+0x136/0x2a8 [<ffffffff81370efe>] ehci_qh_alloc+0x44/0x107 > [<ffffffff81373f5d>] ehci_pci_setup+0x22a/0x9c1 [<ffffffff8135b18e>] > usb_add_hcd+0x225/0x69d [<ffffffff8136907b>] > usb_hcd_pci_probe+0x270/0x3b1 [<ffffffff8125a8ad>] > local_pci_probe+0x17/0x1b [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > [<ffffffff813077ae>] __driver_attach+0x59/0x7d [<ffffffff813069e1>] > bus_for_each_dev+0x54/0x83 [<ffffffff813073fd>] driver_attach+0x21/0x23 > [<ffffffff81306487>] bus_add_driver+0xe1/0x26b [<ffffffff81307ad5>] > driver_register+0xa3/0x11a [<ffffffff8125b71b>] > __pci_register_driver+0x65/0xc2 [<ffffffff819f3ee0>] > ehci_hcd_init+0x7f/0xc0 [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > [<ffffffff819c1961>] kernel_init+0x172/0x1cc [<ffffffff81013eaa>] > child_rip+0xa/0x20 -> (&retval->lock){......} ops: 0 { INITIAL USE at: > [<ffffffff8108eb29>] __lock_acquire+0x38e/0xc07 > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 > [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 > [<ffffffff81370efe>] ehci_qh_alloc+0x44/0x107 > [<ffffffff81373f5d>] ehci_pci_setup+0x22a/0x9c1 > [<ffffffff8135b18e>] usb_add_hcd+0x225/0x69d > [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 > [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b > [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > [<ffffffff813077ae>] __driver_attach+0x59/0x7d > [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 > [<ffffffff813073fd>] driver_attach+0x21/0x23 > [<ffffffff81306487>] bus_add_driver+0xe1/0x26b > [<ffffffff81307ad5>] driver_register+0xa3/0x11a > [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 > [<ffffffff819f3ee0>] ehci_hcd_init+0x7f/0xc0 > [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > [<ffffffff819c1961>] kernel_init+0x172/0x1cc > [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key at: > [<ffffffff824dc3c4>] __key.24188+0x0/0x1c ... acquired at: > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 [<ffffffff8108f128>] > __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] > dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>] uhci_alloc_qh+0x33/0x146 > [<ffffffff8137af66>] uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>] > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>] > usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] > usb_control_msg+0xee/0x113 [<ffffffff813551fb>] hub_port_init+0x31d/0x7e4 > [<ffffffff81356d68>] hub_events+0x91e/0x11a2 [<ffffffff81358432>] > hub_thread+0x25/0x199 [<ffffffff8107b8fd>] kthread+0x6e/0x76 > [<ffffffff81013eaa>] child_rip+0xa/0x20 stack backtrace: Pid: 100, comm: > khubd Not tainted 2.6.32.9 #1 Call Trace: [<ffffffff8108cd50>] > check_usage+0x331/0x345 [<ffffffff81032d79>] ? > pvclock_clocksource_read+0x47/0x80 [<ffffffff8108cdc5>] > check_irq_usage+0x61/0xc5 [<ffffffff8108f128>] __lock_acquire+0x98d/0xc07 > [<ffffffff8111008c>] ? sys_swapoff+0x870/0x9d0 [<ffffffff8108f46f>] > lock_acquire+0xcd/0xf2 [<ffffffff8111178c>] ? dma_pool_alloc+0x36/0x2a8 > [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] ? > dma_pool_alloc+0x36/0x2a8 [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 > [<ffffffff8111a986>] ? init_object+0x73/0x7b [<ffffffff8100ed81>] ? > xen_force_evtchn_callback+0xd/0xf [<ffffffff8100f452>] ? > check_events+0x12/0x20 [<ffffffff8137aa7b>] uhci_alloc_qh+0x33/0x146 > [<ffffffff8111dda9>] ? kmem_cache_alloc+0xd9/0x150 [<ffffffff8137af66>] > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135a29c>] ? > dma_map_single_attrs+0xb4/0xc6 [<ffffffff8135be92>] > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8100ed81>] ? > xen_force_evtchn_callback+0xd/0xf [<ffffffff8100ed81>] ? > xen_force_evtchn_callback+0xd/0xf [<ffffffff8100f452>] ? > check_events+0x12/0x20 [<ffffffff8108b9ea>] ? lockdep_init_map+0x9f/0x115 > [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1 [<ffffffff8107beb6>] ? > __init_waitqueue_head+0x3a/0x4c [<ffffffff8135d51f>] > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8100f452>] ? check_events+0x12/0x20 > [<ffffffff8135c939>] ? usb_alloc_urb+0x21/0x4b [<ffffffff8135c907>] ? > usb_init_urb+0x2a/0x3b [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113 > [<ffffffff8111c5ef>] ? kmem_cache_alloc_notrace+0xe8/0x111 > [<ffffffff8135517a>] ? hub_port_init+0x29c/0x7e4 [<ffffffff813551fb>] > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] hub_events+0x91e/0x11a2 > [<ffffffff8135840d>] ? hub_thread+0x0/0x199 [<ffffffff81358432>] > hub_thread+0x25/0x199 [<ffffffff8107bb4f>] ? > autoremove_wake_function+0x0/0x3d [<ffffffff8107b8fd>] kthread+0x6e/0x76 > [<ffffffff81013eaa>] child_rip+0xa/0x20 [<ffffffff8104edcf>] ? > finish_task_switch+0x0/0xcc [<ffffffff81013810>] ? restore_args+0x0/0x30 > [<ffffffff8107b9f2>] ? kthreadd+0xed/0x10f [<ffffffff81013ea0>] ? > child_rip+0x0/0x20 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA, max UDMA/133 ata1.00: > 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured > for UDMA/133 scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO > PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 > GB/232 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] > Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: > [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk Freeing unused kernel > memory: 3396k freed Write protecting the kernel read-only data: 6988k Red > Hat nash version 5.1.19.6 starting Mounting proc filesystem Mounting sysfs > filesystem Creating /dev Creating initial device nodes Setting up hotplug. > usb 7-1: New USB device found, idVendor=0458, idProduct=0007 usb 7-1: New > USB device strings: Mfr=2, Product=1, SerialNumber=0 usb 7-1: Product: > Optical Mouse usb 7-1: Manufacturer: KYE usb 7-1: configuration #1 chosen > from 1 choice input: KYE Optical Mouse as > /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input3 generic-usb > 0003:0458:0007.0001: input,hidraw0: USB HID v1.10 Mouse [KYE Optical Mouse] > on usb-0000:00:1d.1-1/input0 Creating block device nodes. Loading aacraid.ko > module Adaptec aacraid driver 1.1-5[2461]-ms Scanning and configuring dmraid > supported devices Scanning logical volumes Reading all physical volumes. > This may take a while... Activating logical volumes Volume group > "VolGroup01" not found Trying to resume from /dev/VolGroup01/LogVol01 Unable > to access resume device (/dev/VolGroup01/LogVol01) Creating root device. > Mounting root filesystem. mount: could not find filesystem '/dev/root' > Setting up other filesystems. Setting up new root fs setuproot: moving /dev > failed: No such file or directory no fstab.sys, mounting internal defaults > setuproot: error mounting /proc: No such file or directory setuproot: error > mounting /sys: No such file or directory Switching to new root and running > init. unmounting old /dev unmounting old /proc unmounting old /sys > switchroot: mount failed: No such file or directory init used greatest stack > depth: 4088 bytes left Kernel panic - not syncing: Attempted to kill init! > Pid: 1, comm: init Not tainted 2.6.32.9 #1 Call Trace: [<ffffffff8105b73f>] > panic+0xa5/0x167 [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf > [<ffffffff8105f2ab>] ? do_exit+0x38a/0x701 [<ffffffff8100f43f>] ? > xen_restore_fl_direct_end+0x0/0x1 [<ffffffff8108f81b>] ? > lock_release+0x179/0x184 [<ffffffff8108ca1d>] ? trace_hardirqs_on+0xd/0xf > [<ffffffff81484fcf>] ? _write_unlock_irq+0x37/0x3c [<ffffffff8105ef9f>] > do_exit+0x7e/0x701 [<ffffffff8105f6be>] sys_exit_group+0x0/0x1b > [<ffffffff8105f6d5>] sys_exit_group+0x17/0x1b [<ffffffff81012d72>] > system_call_fastpath+0x16/0x1b > [-- Attachment #1.2: Type: text/html, Size: 72136 bytes --] [-- Attachment #2: New_Log_3.docx --] [-- Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document, Size: 37481 bytes --] [-- Attachment #3: Type: text/plain, Size: 137 bytes --] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-16 22:22 ` kishore kumar @ 2010-03-16 22:29 ` Pasi Kärkkäinen 2010-03-16 22:40 ` [Xen-devel] " kishore kumar 0 siblings, 1 reply; 32+ messages in thread From: Pasi Kärkkäinen @ 2010-03-16 22:29 UTC (permalink / raw) To: kishore kumar; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users On Tue, Mar 16, 2010 at 03:22:50PM -0700, kishore kumar wrote: > attached is the log captured in with the word document . > Scanning logical volumes Reading all physical volumes. This may take a while... Activating logical volumes Volume group "VolGroup01" not found Trying to resume from /dev/VolGroup01/LogVol01 Unable to access resume device (/dev/VolGroup01/LogVol01) Creating root device. Mounting root filesystem. mount: could not find filesystem '/dev/root' Setting up other filesystems. Setting up new root fs setuproot: moving /dev failed: No such file or directory no fstab.sys, mounting internal defaults setuproot: error mounting /proc: No such file or directory setuproot: error mounting /sys: No such file or directory Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys switchroot: mount failed: No such file or directory init used greatest stack depth: 4088 bytes left Kernel panic - not syncing: Attempted to kill init! So it seems it gets all the way to executing the initrd image, which then fails to mount the root fs. Earlier in the log: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA, max UDMA/133 ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk so /dev/sda was detected. Is your root lvm volume on /dev/sda ? Is /dev/VolGroup01/LogVol01 really your root fs? -- Pasi > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi Kärkkäinen <[1]pasik@iki.fi> wrote: > > On Tue, Mar 16, 2010 at 02:56:06PM -0700, kishore kumar wrote: > > Please find the attached log file after fixing the dom 0 kernel cmd > line > > as below > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen > nomodeset > > > > There's something wrong with the log, the dom0 kernel parts are all on > one line.. > It's really difficult to read it. > > -- Pasi > > > Thanks > > > > > > On Tue, Mar 16, 2010 at 2:29 PM, Pasi Kärkkäinen > <[1][2]pasik@iki.fi> wrote: > > > > On Tue, Mar 16, 2010 at 02:16:22PM -0700, kishore kumar wrote: > > > I did below steps. > > > > > > > > > I pulled DOM 0 kernel from > > > git clone > > > git://[1][2][3]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > linux-2.6-xen > > > > > > cd linux-2.6-xen > > > > > > make clean > > > > > > cp -a .config .config-old > > > > > > wget -O .config > > > > > > [2][3][4]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > make oldconfig > > > > > > make bzImage > > > > > > make modules > > > > > > make modules_install > > > > > > cp -a .config /boot/config-2.6.32.9 > > > > > > cp -a System.map /boot/System.map-2.6.32.9 > > > > > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.9 > > > > > > and modified the grub.conf as below > > > > > > > > > Root(hd0,0) > > > > > > kernel /xen.gz console=vga,com1 com1=115200,8n1 msi=1 > iommu=1 > > > > > > module /vmlinuz-2.6.32.9 ro root=/dev/VolGroup01/LogVo100 > rhgb > > quiet > > > > > > module /initrd-2.6.32.9.img > > > > > > > > > and rebooted the machine. Then It booted with some xen > messages > > and > > > stopped. Those were the messages captured from serial > console. > > > > > > Please let me know if I did something wrong here. > > > > > > > Please fix the kernel cmdline based on my earlier email, and > capture and > > post the > > serial console log again! > > > > -- Pasi > > > > > > > > > On Tue, Mar 16, 2010 at 1:20 PM, Pasi Kärkkäinen > > <[3][4][5]pasik@iki.fi> wrote: > > > > > > On Tue, Mar 16, 2010 at 01:16:28PM -0700, Jeremy > Fitzhardinge > > wrote: > > > > On 03/16/2010 12:48 PM, Pasi Kärkkäinen wrote: > > > >> On Tue, Mar 16, 2010 at 09:43:44PM +0200, Pasi > Kärkkäinen > > wrote: > > > >> > > > >>> On Tue, Mar 16, 2010 at 10:32:17AM -0700, kishore > kumar > > wrote: > > > >>> > > > >>>> Attached is the output captured from serial > console. > > > >>>> > > > >>>> Machine does not boot after compiling xen 3.4.3 > with > > pv_ops dom > > > 0 kernel. > > > >>>> > > > >>>> Please let me know what is going wrong here. > > > >>>> > > > >>>> > > > >>> Ok this looks like a bug that is already being sorted > out on > > > xen-devel mailinglist. > > > >>> I added CC to xen-devel. > > > >>> > > > >>> > > > >> > > > > > > > > Those messages are not a problem in themselves, but the > related > > > problem > > > > is believed to be fixed in current xen/stable-2.6.32.x. > It > > looks like > > > > the output stops there because the Xen console isn't set > up > > properly > > > for > > > > some reason. > > > > > > > > > > Yeah, remove "rhgb quiet" from the options.. the dom0 > kernel > > cmdline > > > should be like this: > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 > earlyprintk=xen > > nomodeset > > > -- Pasi > > > > > > References > > > > > > Visible links > > > 1. > [5][6]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 2. > > > [6][7]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 3. mailto:[7][8]pasik@iki.fi > > > > References > > > > Visible links > > 1. mailto:[9]pasik@iki.fi > > 2. > [10]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 3. > [11]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 4. mailto:[12]pasik@iki.fi > > 5. > [13]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 6. > [14]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 7. mailto:[15]pasik@iki.fi > > Asserting Post complete GPIO!!! > > Transfer control to CSM 16-bit binary for legacy boot > > __ __ _____ _ _ _____ _ _ > > \ \/ /___ _ __ |___ /| || | |___ / _ __ ___| || | _ __ _ > __ ___ > > \ // _ \ '_ \ |_ \| || |_ |_ \ __| '__/ __| || |_ __| '_ \| > '__/ _ \ > > / \ __/ | | | ___) |__ _| ___) |__| | | (__|__ _|__| |_) | | > | __/ > > /_/\_\___|_| |_| |____(_) |_|(_)____/ |_| \___| |_| | .__/|_| > \___| > > |_| > > (XEN) Xen version 3.4.3-rc4-pre (kishore@localdomain) (gcc version > 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar 15 13:44:31 PDT 2010 > > (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 2010 +0000 > 19924:6e72f8c3c017 > > (XEN) Command line: console=vga,com1 com1=115200,8n1 msi=1 iommu=1 > > (XEN) Video information: > > (XEN) VGA is text mode 80x25, font 8x16 > > (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds > > (XEN) EDID info not retrieved because no DDC retrieval method > detected > > (XEN) Disc information: > > (XEN) Found 1 MBR signatures > > (XEN) Found 1 EDD information structures > > (XEN) Xen-e820 RAM map: > > (XEN) 0000000000000000 - 000000000009d000 (usable) > > (XEN) 000000000009d000 - 00000000000a0000 (reserved) > > (XEN) 00000000000e0000 - 0000000000100000 (reserved) > > (XEN) 0000000000100000 - 000000006d597000 (usable) > > (XEN) 000000006d597000 - 000000006d686000 (reserved) > > (XEN) 000000006d686000 - 000000006f598000 (usable) > > (XEN) 000000006f598000 - 000000006f59a000 (reserved) > > (XEN) 000000006f59a000 - 000000006f5af000 (ACPI NVS) > > (XEN) 000000006f5af000 - 000000006f5d9000 (reserved) > > (XEN) 000000006f5d9000 - 000000006f5f9000 (ACPI data) > > (XEN) 000000006f5f9000 - 000000006f6df000 (ACPI NVS) > > (XEN) 000000006f6df000 - 000000006f700000 (ACPI data) > > (XEN) 000000006f700000 - 0000000080000000 (reserved) > > (XEN) 00000000a0000000 - 00000000b0000000 (reserved) > > (XEN) 00000000fc000000 - 00000000fd000000 (reserved) > > (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) > > (XEN) 00000000ffc00000 - 0000000100000000 (reserved) > > (XEN) System RAM: 1780MB (1823000kB) > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL ) > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL THRLY 0 > 1000013) > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL THRLY 0 MSFT > 100000D) > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL THRLY 3 MSFT > 100000D) > > (XEN) ACPI: FACS 6F5F9000, 0040 > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL THRLY 0 MSFT > 100000D) > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL THRLY 1 MSFT > 100000D) > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL THRLY 1 MSFT > 100000D) > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL THRLY 1 MSFT > 100000D) > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL THRLY 0 MSFT > 100000D) > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 INTEL SSDT PM 4000 INTL > 20061109) > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL THRLY 1 MSFT > 100000D) > > (XEN) Domain heap initialised > > (XEN) Processor #0 6:12 APIC version 21 > > (XEN) Processor #2 6:12 APIC version 21 > > (XEN) Processor #4 6:12 APIC version 21 > > (XEN) Processor #16 6:12 APIC version 21 > > (XEN) Processor #18 6:12 APIC version 21 > > (XEN) Processor #20 6:12 APIC version 21 > > (XEN) Processor #1 6:12 APIC version 21 > > (XEN) Processor #3 6:12 APIC version 21 > > (XEN) Processor #5 6:12 APIC version 21 > > (XEN) Processor #17 6:12 APIC version 21 > > (XEN) Processor #19 6:12 APIC version 21 > > (XEN) Processor #21 6:12 APIC version 21 > > (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > > (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec90000, GSI 24-47 > > (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs > > (XEN) Intel VT-d DMAR tables have been parsed. > > (XEN) Using scheduler: SMP Credit Scheduler (credit) > > (XEN) Detected 3200.207 MHz processor. > > (XEN) VMX: Supported advanced features: > > (XEN) - APIC MMIO access virtualisation > > (XEN) - APIC TPR shadow > > (XEN) - Extended Page Tables (EPT) > > (XEN) - Virtual-Processor Identifiers (VPID) > > (XEN) - Virtual NMI > > (XEN) - MSR direct-access bitmap > > (XEN) VMX: EPT is available. > > (XEN) VMX: VPID is available. > > (XEN) HVM: VMX enabled > > (XEN) HVM: Hardware Assisted Paging detected. > > (XEN) CPU0: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 1/2 eip 88000 > > (XEN) CPU1: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 2/4 eip 88000 > > (XEN) CPU2: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 3/16 eip 88000 > > (XEN) CPU3: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 4/18 eip 88000 > > (XEN) CPU4: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 5/20 eip 88000 > > (XEN) CPU5: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 6/1 eip 88000 > > (XEN) CPU6: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 7/3 eip 88000 > > (XEN) CPU7: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 8/5 eip 88000 > > (XEN) CPU8: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 9/17 eip 88000 > > (XEN) CPU9: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 10/19 eip 88000 > > (XEN) CPU10: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Booting processor 11/21 eip 88000 > > (XEN) CPU11: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > stepping 00 > > (XEN) Total of 12 processors activated. > > (XEN) ENABLING IO-APIC IRQs > > (XEN) -> Using new ACK method > > (XEN) checking TSC synchronization across 12 CPUs: passed. > > (XEN) Platform timer is 14.318MHz HPET > > ?(XEN) Brought up 12 CPUs > > (XEN) Intel VT-d Snoop Control supported. > > (XEN) Intel VT-d DMA Passthrough not supported. > > (XEN) Intel VT-d Queued Invalidation supported. > > (XEN) Intel VT-d Interrupt Remapping supported. > > (XEN) I/O virtualisation enabled > > (XEN) I/O virtualisation for PV guests disabled > > (XEN) xenoprof: Initialization failed. Intel processor model 44 for P6 > class family is not supported > > (XEN) *** LOADING DOMAIN 0 *** > > (XEN) Xen kernel: 64-bit, lsb, compat32 > > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x26bb000 > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > (XEN) Dom0 alloc.: 0000000064000000->0000000068000000 (404490 pages > to be allocated) > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > (XEN) Loaded kernel: ffffffff81000000->ffffffff826bb000 > > (XEN) Init. ramdisk: ffffffff826bb000->ffffffff82d0d800 > > (XEN) Phys-Mach map: ffffffff82d0e000->ffffffff83044050 > > (XEN) Start info: ffffffff83045000->ffffffff830454b4 > > (XEN) Page tables: ffffffff83046000->ffffffff83063000 > > (XEN) Boot stack: ffffffff83063000->ffffffff83064000 > > (XEN) TOTAL: ffffffff80000000->ffffffff83400000 > > (XEN) ENTRY ADDRESS: ffffffff819c1200 > > (XEN) Dom0 has maximum 12 VCPUs > > (XEN) Scrubbing Free RAM: .done. > > (XEN) Xen trace buffers: disabled > > (XEN) Std. Loglevel: Errors and warnings > > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) > > (XEN) Xen is relinquishing VGA console. > > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch > input to Xen) > > (XEN) Freed 128kB init memory. > > mapping kernel into physical memory > > Xen: setup ISA identity maps > > about to get started... > > Initializing cgroup subsys cpuset > > Initializing cgroup subsys cpu > > Linux version 2.6.32.9 (kishore@localhost.localdomain) (gcc version > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 15 15:16:28 PDT 2010 > > Command line: ro root=/dev/VolGroup01/LogVol00 console=hvc0 > earlyprintk=xen nomodeset > > KERNEL supported cpus: > > Intel GenuineIntel > > AMD AuthenticAMD > > Centaur CentaurHauls > > BIOS-provided physical RAM map: > > Xen: 0000000000000000 - 000000000009d000 (usable) > > Xen: 000000000009d000 - 0000000000100000 (reserved) > > Xen: 0000000000100000 - 0000000066c0a000 (usable) > > Xen: 000000006d597000 - 000000006d686000 (reserved) > > Xen: 000000006f598000 - 000000006f59a000 (reserved) > > Xen: 000000006f59a000 - 000000006f5af000 (ACPI NVS) > > Xen: 000000006f5af000 - 000000006f5d9000 (reserved) > > Xen: 000000006f5d9000 - 000000006f5f9000 (ACPI data) > > Xen: 000000006f5f9000 - 000000006f6df000 (ACPI NVS) > > Xen: 000000006f6df000 - 000000006f700000 (ACPI data) > > Xen: 000000006f700000 - 0000000080000000 (reserved) > > Xen: 00000000a0000000 - 00000000b0000000 (reserved) > > Xen: 00000000fc000000 - 00000000fd000000 (reserved) > > Xen: 00000000fed1c000 - 00000000fed20000 (reserved) > > Xen: 00000000ffc00000 - 0000000100000000 (reserved) > > bootconsole [xenboot0] enabled > > DMI 2.4 present. > > last_pfn = 0x66c0a max_arch_pfn = 0x400000000 > > init_memory_mapping: 0000000000000000-0000000066c0a000 > > RAMDISK: 026bb000 - 02d0d800 > > ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL ) > > ACPI: XSDT 000000006f6fe120 00064 (v01 INTEL THRLY 00000000 > 01000013) > > ACPI: FACP 000000006f6fd000 000F4 (v04 INTEL THRLY 00000000 MSFT > 0100000D) > > ACPI: DSDT 000000006f6f5000 074F1 (v02 INTEL THRLY 00000003 MSFT > 0100000D) > > ACPI: FACS 000000006f5f9000 00040 > > ACPI: APIC 000000006f6f4000 001CC (v02 INTEL THRLY 00000000 MSFT > 0100000D) > > ACPI: MCFG 000000006f6f3000 0003C (v01 INTEL THRLY 00000001 MSFT > 0100000D) > > ACPI: HPET 000000006f6f2000 00038 (v01 INTEL THRLY 00000001 MSFT > 0100000D) > > ACPI: SLIT 000000006f6f1000 00030 (v01 INTEL THRLY 00000001 MSFT > 0100000D) > > ACPI: WDDT 000000006f6f0000 00040 (v01 INTEL THRLY 00000000 MSFT > 0100000D) > > ACPI: SSDT 000000006f5d9000 1FDDC (v01 INTEL SSDT PM 00004000 INTL > 20061109) > > ACPI: 000000006f6ee000 001D0 (v01 INTEL THRLY 00000001 MSFT > 0100000D) > > No NUMA configuration found > > Faking a node at 0000000000000000-0000000066c0a000 > > Bootmem setup node 0 0000000000000000-0000000066c0a000 > > NODE_DATA [0000000000008000 - 000000000001ffff] > > bootmap [0000000000020000 - 000000000002cd87] pages d > > (9 early reservations) ==> bootmem [0000000000 - 0066c0a000] > > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - > 0000001000] > > #1 [0003046000 - 0003063000] XEN PAGETABLES ==> [0003046000 - > 0003063000] > > #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - > 0000008000] > > #3 [0001000000 - 000269ae98] TEXT DATA BSS ==> [0001000000 - > 000269ae98] > > #4 [00026bb000 - 0002d0d800] RAMDISK ==> [00026bb000 - > 0002d0d800] > > #5 [0002d0e000 - 0003046000] XEN START INFO ==> [0002d0e000 - > 0003046000] > > #6 [000269b000 - 000269b011] BRK ==> [000269b000 - > 000269b011] > > #7 [0000100000 - 000041a000] PGTABLE ==> [0000100000 - > 000041a000] > > #8 [0000001000 - 0000001030] ACPI SLIT ==> [0000001000 - > 0000001030] > > found SMP MP-table at [ffff8800000fd750] fd750 > > Zone PFN ranges: > > DMA 0x00000000 -> 0x00001000 > > DMA32 0x00001000 -> 0x00100000 > > Normal 0x00100000 -> 0x00100000 > > Movable zone start PFN for each node > > early_node_map[2] active PFN ranges > > 0: 0x00000000 -> 0x0000009d > > 0: 0x00000100 -> 0x00066c0a > > ACPI: PM-Timer IO Port: 0x408 > > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) > > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled) > > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled) > > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) > > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] enabled) > > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) > > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] enabled) > > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled) > > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled) > > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled) > > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) > > ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) > > ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1]) > > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > > IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 > > ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24]) > > IOAPIC[1]: apic_id 9, version 0, address 0xfec90000, GSI 24-24 > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > ERROR: Unable to locate IOAPIC for GSI 2 > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > > ERROR: Unable to locate IOAPIC for GSI 9 > > Using ACPI (MADT) for SMP configuration information > > ACPI: HPET id: 0x8086a401 base: 0xfed00000 > > SMP: Allowing 12 CPUs, 0 hotplug CPUs > > PM: Registered nosave memory: 000000000009d000 - 0000000000100000 > > Allocating PCI resources starting at b0000000 (gap: b0000000:4c000000) > > Booting paravirtualized kernel on Xen > > Xen version: 3.4.3-rc4-pre (preserve-AD) (dom0) > > NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1 > > PERCPU: Embedded 478 pages/cpu @ffff880005ebc000 s1928024 r8192 d21672 > u1957888 > > pcpu-alloc: s1928024 r8192 d21672 u1957888 alloc=478*4096 > > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 > > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 > > Xen: using vcpu_info placement > > Built 1 zonelists in Node order, mobility grouping on. Total pages: > 409291 > > Policy zone: DMA32 > > Kernel command line: ro root=/dev/VolGroup01/LogVol00 console=hvc0 > earlyprintk=xen nomodeset > > PID hash table entries: 4096 (order: 3, 32768 bytes) > > Initializing CPU#0 > > DMA: Placing 64MB software IO TLB between ffff880007525000 - > ffff88000b525000 > > DMA: software IO TLB at phys 0x7525000 - 0xb525000 > > xen_swiotlb_fixup: buf=ffff880007525000 size=67108864 > > xen_swiotlb_fixup: buf=ffff88000b585000 size=32768 > > Memory: 1514268k/1683496k available (4654k kernel code, 396k absent, > 168832k reserved, 3443k data, 3396k init) > > SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=12, > Nodes=1 > > Hierarchical RCU implementation. > > NR_IRQS:4352 nr_irqs:3072 > > Already setup the GSI :0 > > Already setup the GSI :1 > > Already setup the GSI :2 > > Already setup the GSI :3 > > Already setup the GSI :4 > > Already setup the GSI :5 > > Already setup the GSI :6 > > Already setup the GSI :7 > > Already setup the GSI :8 > > Already setup the GSI :9 > > Already setup the GSI :10 > > Already setup the GSI :11 > > Already setup the GSI :12 > > Already setup the GSI :13 > > Already setup the GSI :14 > > Already setup the GSI :15 > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > > xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 > > xen_allocate_pirq: returning irq 9 for gsi 9 > > Already setup the GSI :9 > > xen: acpi sci 9 > > Console: colour VGA+ 80x25 > > console [hvc0] enabled, bootconsole disabled console [hvc0] enabled, > bootconsole disabled > > Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 > ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... > MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... > CHAINHASH_SIZE: 16384 memory used by lock dependency info: > 6367 kB per task-struct memory footprint: 2688 bytes allocated 17039360 > bytes of page_cgroup please try 'cgroup_disable=memory' option if you > don't want memory cgroups installing Xen timer for CPU 0 Detected > 3200.206 MHz processor. Calibrating delay loop (skipped), value > calculated using timer frequency.. 6400.41 BogoMIPS (lpj=3200206) > Security Framework initialized SELinux: Initializing. Dentry cache hash > table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table > entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table > entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys > cpuacct Initializing cgroup subsys memory Initializing cgroup subsys > devices Initializing cgroup subsys freezer Initializing cgroup subsys > net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: > L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU: Unsupported number of siblings > 32 Performance Events: unsupported p6 CPU model 44 no PMU driver, > software events only. lockdep: fixing up alternatives. SMP alternatives: > switching to UP code ACPI: Core revision 20090903 ftrace: converting > mcount calls to 0f 1f 44 00 00 ftrace: allocating 27971 entries in 110 > pages installing Xen timer for CPU 1 lockdep: fixing up alternatives. > SMP alternatives: switching to SMP code Initializing CPU#1 CPU: L1 I > cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K > CPU 1/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing > Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I cache: 32K, L1 D cache: > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 2/0x0 -> Node 0 CPU: > Unsupported number of siblings 32 installing Xen timer for CPU 3 > Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: > 256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node 0 CPU: Unsupported number > of siblings 32 installing Xen timer for CPU 4 Initializing CPU#4 CPU: L1 > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K > CPU 4/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing > Xen timer for CPU 5 Initializing CPU#5 CPU: L1 I cache: 32K, L1 D cache: > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 5/0x0 -> Node 0 CPU: > Unsupported number of siblings 32 installing Xen timer for CPU 6 > Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: > 256K CPU: L3 cache: 12288K CPU 6/0x0 -> Node 0 CPU: Unsupported number > of siblings 32 installing Xen timer for CPU 7 Initializing CPU#7 CPU: L1 > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K > CPU 7/0x0 -> Node 0 CPU: Unsupported number of siblings 32 installing > Xen timer for CPU 8 Initializing CPU#8 CPU: L1 I cache: 32K, L1 D cache: > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 8/0x0 -> Node 0 CPU: > Unsupported number of siblings 32 installing Xen timer for CPU 9 > Initializing CPU#9 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: > 256K CPU: L3 cache: 12288K CPU 9/0x0 -> Node 0 CPU: Unsupported number > of siblings 32 installing Xen timer for CPU 10 Initializing CPU#10 CPU: > L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: > 12288K CPU 10/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > installing Xen timer for CPU 11 Initializing CPU#11 CPU: L1 I cache: > 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU > 11/0x0 -> Node 0 CPU: Unsupported number of siblings 32 Brought up 12 > CPUs Grant table initialized regulator: core version 0.5 Time: 14:45:00 > Date: 03/16/10 NET: Registered protocol family 16 xenbus_probe_init ok > ACPI FADT declares the system doesn't support PCIe ASPM, so disable it > ACPI: bus type pci registered PCI: MCFG configuration 0: base a0000000 > segment 0 buses 0 - 255 PCI: MCFG area at a0000000 reserved in E820 PCI: > Using MMCONFIG at a0000000 - afffffff PCI: Using configuration type 1 > for base access bio: create slab <bio-0> at 0 ACPI Error: Field [CPB3] > at 96 exceeds Buffer [NULL] size 64 (bits) (20090903/dsopcode-596) ACPI > Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node > ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI: Interpreter enabled ACPI: > (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI > Warning: Incorrect checksum in table [ ] - 97, should be DB > (20090903/tbutils-314) ACPI: No dock devices found. ACPI: PCI Root > Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot > D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: PME# supported > from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: > PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci > 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# > disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci > 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 > D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# > supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci > 0000:00:08.0: PME# supported from D0 D3hot D3cold pci 0000:00:08.0: PME# > disabled pci 0000:00:09.0: PME# supported from D0 D3hot D3cold pci > 0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME# supported from D0 > D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:13.0: PME# > supported from D0 D3hot D3cold pci 0000:00:13.0: PME# disabled pci > 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# > disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci > 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 > D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# > supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci > 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# > disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 > ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 > GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0600 (mask > 001f) pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# > disabled pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci > 0000:01:00.0: PME# disabled pci 0000:01:00.1: PME# supported from D0 > D3hot D3cold pci 0000:01:00.1: PME# disabled pci 0000:0c:00.0: disabling > ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' > pci 0000:00:1e.0: transparent bridge ACPI: PCI Root Bridge [PCI1] > (0000:fe) ACPI: PCI Root Bridge [PCI2] (0000:ff) ACPI: PCI Interrupt > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) > xenbus_probe_backend_init bus registered ok xenbus_probe_frontend_init > bus registered ok xen_balloon: Initialising balloon driver with page > order 0. vgaarb: device added: > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded > SCSI subsystem initialized usbcore: registered new interface driver > usbfs usbcore: registered new interface driver hub usbcore: registered > new device driver usb PCI: Using ACPI for IRQ routing NetLabel: > Initializing NetLabel: domain hash size = 128 NetLabel: protocols = > UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default > Switching to clocksource xen kstop/0 used greatest stack depth: 6568 > bytes left kstop/1 used greatest stack depth: 6536 bytes left pnp: PnP > ACPI init ACPI: bus type pnp registered xen_allocate_pirq: returning irq > 8 for gsi 8 Already setup the GSI :8 xen_allocate_pirq: returning irq 13 > for gsi 13 Already setup the GSI :13 pnp: PnP ACPI: found 13 devices > ACPI: ACPI bus type pnp unregistered system 00:07: ioport range > 0x500-0x53f has been reserved system 00:07: ioport range 0x400-0x47f has > been reserved system 00:07: ioport range 0x800-0x81f has been reserved > system 00:07: ioport range 0x2f8-0x2ff has been reserved system 00:07: > iomem range 0xfed1c000-0xfed8bffe could not be reserved system 00:07: > iomem range 0xff000000-0xffffffff could not be reserved system 00:07: > iomem range 0xfee00000-0xfeefffff has been reserved system 00:07: iomem > range 0xfe900000-0xfe90001f has been reserved system 00:07: iomem range > 0xfea00000-0xfea0001f has been reserved system 00:07: iomem range > 0xfed1b000-0xfed1bfff has been reserved pci 0000:0c:00.0: BAR 6: no > parent found for of device [0xffff0000-0xffffffff] pci 0000:00:01.0: PCI > bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: > 0x1000-0x1fff pci 0000:00:01.0: MEM window: 0xb1900000-0xb19fffff pci > 0000:00:01.0: PREFETCH window: disabled pci 0000:00:02.0: PCI bridge, > secondary bus 0000:02 pci 0000:00:02.0: IO window: disabled pci > 0000:00:02.0: MEM window: disabled pci 0000:00:02.0: PREFETCH > window: disabled pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 pci > 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM window: > disabled pci 0000:00:03.0: PREFETCH window: disabled pci 0000:00:04.0: > PCI bridge, secondary bus 0000:04 pci 0000:00:04.0: IO window: > disabled pci 0000:00:04.0: MEM window: disabled pci 0000:00:04.0: > PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, secondary bus > 0000:05 pci 0000:00:05.0: IO window: disabled pci 0000:00:05.0: MEM > window: disabled pci 0000:00:05.0: PREFETCH window: disabled pci > 0000:00:06.0: PCI bridge, secondary bus 0000:06 pci 0000:00:06.0: IO > window: disabled pci 0000:00:06.0: MEM window: disabled pci > 0000:00:06.0: PREFETCH window: disabled pci 0000:00:07.0: PCI bridge, > secondary bus 0000:07 pci 0000:00:07.0: IO window: disabled pci > 0000:00:07.0: MEM window: disabled pci 0000:00:07.0: PREFETCH > window: disabled pci 0000:00:08.0: PCI bridge, secondary bus 0000:08 pci > 0000:00:08.0: IO window: disabled pci 0000:00:08.0: MEM window: > disabled pci 0000:00:08.0: PREFETCH window: disabled pci 0000:00:09.0: > PCI bridge, secondary bus 0000:09 pci 0000:00:09.0: IO window: > 0x3000-0x3fff pci 0000:00:09.0: MEM window: 0xb1b00000-0xb1cfffff pci > 0000:00:09.0: PREFETCH window: 0x000000b1d00000-0x000000b1efffff pci > 0000:00:0a.0: PCI bridge, secondary bus 0000:0a pci 0000:00:0a.0: IO > window: disabled pci 0000:00:0a.0: MEM window: disabled pci > 0000:00:0a.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI bridge, > secondary bus 0000:0b pci 0000:00:1c.0: IO window: disabled pci > 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH > window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0c pci > 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: > 0xb1000000-0xb18fffff pci 0000:00:1c.4: PREFETCH window: > 0x000000b0000000-0x000000b0ffffff pci 0000:00:1c.5: PCI bridge, > secondary bus 0000:0d pci 0000:00:1c.5: IO window: disabled pci > 0000:00:1c.5: MEM window: disabled pci 0000:00:1c.5: PREFETCH > window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0e pci > 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: > disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: > PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci 0000:00:02.0: PCI INT A > -> GSI 29 (level, low) -> IRQ 29 pci 0000:00:03.0: PCI INT A -> GSI 24 > (level, low) -> IRQ 24 pci 0000:00:04.0: PCI INT A -> GSI 25 (level, > low) -> IRQ 25 pci 0000:00:05.0: PCI INT A -> GSI 26 (level, low) -> IRQ > 26 pci 0000:00:06.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27 pci > 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 pci > 0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 pci > 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci > 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 pci > 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > xen_allocate_pirq: returning irq 16 for gsi 16 Already setup the GSI :16 > pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci > 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 NET: Registered > protocol family 2 IP route cache hash table entries: 65536 (order: 7, > 524288 bytes) TCP established hash table entries: 262144 (order: 10, > 4194304 bytes) TCP bind hash table entries: 65536 (order: 10, 4718592 > bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP > reno registered NET: Registered protocol family 1 pci 0000:01:00.0: > Disabling L0s pci 0000:01:00.1: Disabling L0s Trying to unpack rootfs > image as initramfs... Freeing initrd memory: 6474k freed DMA-API: > preallocated 32768 debug entries DMA-API: debugging enabled by kernel > config PCI-DMA: Using software bounce buffering for IO (SWIOTLB) DMA: > Placing 64MB software IO TLB between ffff880007525000 - ffff88000b525000 > DMA: software IO TLB at phys 0x7525000 - 0xb525000 audit: initializing > netlink socket (disabled) type=2000 audit(1268750702.035:1): initialized > HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk > quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 > bytes) msgmni has been set to 2970 cryptomgr_test used greatest stack > depth: 5864 bytes left cryptomgr_test used greatest stack depth: 5816 > bytes left alg: No test for stdrng (krng) Block layer SCSI generic (bsg) > driver version 0.4 loaded (major 252) io scheduler noop registered io > scheduler anticipatory registered io scheduler deadline registered io > scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core > version: 0.5 pciehp 0000:00:09.0:pcie04: HPC vendor_id 8086 device_id > 3410 ss_vid 0 ss_did 0 pciehp: PCI Express Hot Plug Controller Driver > version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > acpiphp_glue: Slot 2 already registered by another hotplug driver > acpiphp_glue: Slot 2 already registered by another hotplug driver > acpiphp_glue: Slot 2 already registered by another hotplug driver > acpiphp_glue: Slot 2 already registered by another hotplug driver > acpiphp_glue: Slot 2 already registered by another hotplug driver > acpiphp_glue: Slot 2 already registered by another hotplug driver > acpiphp_glue: Slot 2 already registered by another hotplug driver > acpiphp_glue: Slot 2 already registered by another hotplug driver > pci-stub: invalid id string "" input: Sleep Button as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 ACPI: Sleep > Button [SLPB] input: Power Button as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] > registering netback hpet_acpi_add: no address or irqs in _CRS > Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: > 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS1 at I/O > 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded > input: Macintosh mouse button emulation as /devices/virtual/input/input2 > ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ahci > 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc > ems scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci > scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection > status changed irq 2996 ata2: SATA max UDMA/133 abar m2048@0xb1a00000 > port 0xb1a00180 irq 2996 ata3: SATA max UDMA/133 abar m2048@0xb1a00000 > port 0xb1a00200 irq 2996 ata4: SATA max UDMA/133 abar m2048@0xb1a00000 > port 0xb1a00280 irq 2996 ata5: SATA max UDMA/133 abar m2048@0xb1a00000 > port 0xb1a00300 irq 2996 ata6: SATA max UDMA/133 abar m2048@0xb1a00000 > port 0xb1a00380 irq 2996 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 > 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT > C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: EHCI Host > Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus > number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: irq > 18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: > New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: > Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32.9 > ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 > chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports > detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ > 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: > new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: > debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb1a01000 ehci_hcd > 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, > idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, > Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb > usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd usb usb2: SerialNumber: > 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub > 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 > 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host > Controller Interface driver xen_allocate_pirq: returning irq 16 for gsi > 16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 > (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: UHCI Host Controller > uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020e0 usb usb3: New USB > device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device > strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host > Controller usb usb3: Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb3: > SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 > choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd > 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd > 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus > registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base > 0x000020c0 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb > usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux > 2.6.32.9 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: > configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub > 4-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 19 for gsi 19 > Already setup the GSI :19 uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 > (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: UHCI Host Controller > uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1a.2: irq 19, io base 0x000020a0 usb usb5: New USB > device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device > strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host > Controller usb usb5: Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb5: > SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 > choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected > xen_allocate_pirq: returning irq 23 for gsi 23 Already setup the GSI :23 > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new > USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, > io base 0x00002080 usb usb6: New USB device found, idVendor=1d6b, > idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: > Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb6: SerialNumber: > 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub > 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected xen_allocate_pirq: > returning irq 19 for gsi 19 Already setup the GSI :19 uhci_hcd > 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd > 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus > registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base > 0x00002060 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb > usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux > 2.6.32.9 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: > configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub > 7-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 18 for gsi 18 > Already setup the GSI :18 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 > (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 > uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb usb8: New USB > device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device > strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host > Controller usb usb8: Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb8: > SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 > choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PNP: No > PS/2 controller found. Probing ports directly. i8042.c: No controller > found. mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC > can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one month, y3k, 114 bytes nvram device-mapper: > uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) > initialised: [16]dm-devel@redhat.com cpuidle: using governor ladder > cpuidle: using governor menu usbcore: registered new interface driver > hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB > HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use > nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option > or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) > 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM > netlink socket NET: Registered protocol family 17 registered taskstats > version 1 No TPM chip found, activating TPM-bypass! Magic number: > 2:902:788 pci 0000:00:16.6: hash matches rtc_cmos 00:03: setting system > clock to 2010-03-16 14:45:05 UTC (1268750705) Initalizing network drop > monitor service ata2: SATA link down (SStatus 0 SControl 300) ata4: SATA > link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 > SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata3: SATA > link down (SStatus 0 SControl 300) usb 7-1: new low speed USB device > using uhci_hcd and address 2 > ====================================================== [ INFO: > SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] 2.6.32.9 #1 > ------------------------------------------------------ khubd/100 > [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (&retval->lock){......}, > at: [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 and this task is > already holding: (&uhci->lock){..-...}, at: [<ffffffff8137aedd>] > uhci_urb_enqueue+0x46/0x7e3 which would create a new lock dependency: > (&uhci->lock){..-...} -> (&retval->lock){......} but this new > dependency connects a SOFTIRQ-irq-safe lock: (&uhci->lock){..-...} ... > which became SOFTIRQ-irq-safe at: [<ffffffff8108ea6d>] > __lock_acquire+0x2d2/0xc07 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 > [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c > [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a > [<ffffffff8135a479>] rh_timer_func+0xe/0x10 [<ffffffff810693bd>] > run_timer_softirq+0x1a6/0x257 [<ffffffff810627e4>] > __do_softirq+0xe6/0x1bc [<ffffffff81013fac>] call_softirq+0x1c/0x30 > [<ffffffff81015794>] do_softirq+0x4b/0xa7 [<ffffffff81062229>] > irq_exit+0x4a/0x89 [<ffffffff812bf9d9>] > xen_evtchn_do_upcall+0x156/0x172 [<ffffffff81013ffe>] > xen_do_hypervisor_callback+0x1e/0x30 to a SOFTIRQ-irq-unsafe lock: > (purge_lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: ... > [<ffffffff8108eadc>] __lock_acquire+0x341/0xc07 [<ffffffff8108f46f>] > lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] _spin_lock+0x36/0x6b > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 [<ffffffff8100e58c>] > xen_alloc_ptpage+0x51/0x82 [<ffffffff8100e5d0>] > xen_alloc_pud+0x13/0x15 [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 [<ffffffff8110c197>] > map_vm_area+0x34/0x47 [<ffffffff8110c2cf>] > __vmalloc_area_node+0x125/0x14d [<ffffffff8110c379>] > __vmalloc_node+0x82/0x91 [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 > [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d [<ffffffff819c1d99>] > start_kernel+0x3de/0x426 [<ffffffff819c12c3>] > x86_64_start_reservations+0xae/0xb2 [<ffffffff819c4d5d>] > xen_start_kernel+0x4b9/0x4c0 other info that might help us debug this: > 2 locks held by khubd/100: #0: (usb_address0_mutex){+.+...}, at: > [<ffffffff81354f5f>] hub_port_init+0x81/0x7e4 #1: > (&uhci->lock){..-...}, at: [<ffffffff8137aedd>] > uhci_urb_enqueue+0x46/0x7e3 the dependencies between SOFTIRQ-irq-safe > lock and the holding lock: -> (&uhci->lock){..-...} ops: 0 { > IN-SOFTIRQ-W at: [<ffffffff8108ea6d>] > __lock_acquire+0x2d2/0xc07 [<ffffffff8108f46f>] > lock_acquire+0xcd/0xf2 [<ffffffff81485526>] > _spin_lock_irqsave+0x4f/0x86 > [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c > [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a > [<ffffffff8135a479>] rh_timer_func+0xe/0x10 > [<ffffffff810693bd>] run_timer_softirq+0x1a6/0x257 > [<ffffffff810627e4>] __do_softirq+0xe6/0x1bc > [<ffffffff81013fac>] call_softirq+0x1c/0x30 > [<ffffffff81015794>] do_softirq+0x4b/0xa7 > [<ffffffff81062229>] irq_exit+0x4a/0x89 > [<ffffffff812bf9d9>] xen_evtchn_do_upcall+0x156/0x172 > [<ffffffff81013ffe>] xen_do_hypervisor_callback+0x1e/0x30 > INITIAL USE at: [<ffffffff8108eb29>] > __lock_acquire+0x38e/0xc07 [<ffffffff8108f46f>] > lock_acquire+0xcd/0xf2 [<ffffffff81485526>] > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8137c3d7>] > uhci_hub_control+0x74/0x401 [<ffffffff8135bdac>] > usb_hcd_submit_urb+0x7a6/0xa1e > [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1 > [<ffffffff8135d51f>] usb_start_wait_urb+0x54/0x1b1 > [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113 > [<ffffffff81358922>] hub_probe+0x37c/0xfaa > [<ffffffff81360a35>] usb_probe_interface+0x15a/0x1f7 > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > [<ffffffff813077fa>] __device_attach+0x28/0x31 > [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 > [<ffffffff81307891>] device_attach+0x65/0x7c > [<ffffffff8130667e>] bus_probe_device+0x27/0x3e > [<ffffffff813045b3>] device_add+0x3ab/0x57d > [<ffffffff8135e3ca>] usb_set_configuration+0x5b9/0x677 > [<ffffffff81367b85>] generic_probe+0x67/0xae > [<ffffffff813607b1>] usb_probe_device+0x7f/0x87 > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > [<ffffffff813077fa>] __device_attach+0x28/0x31 > [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 > [<ffffffff81307891>] device_attach+0x65/0x7c > [<ffffffff8130667e>] bus_probe_device+0x27/0x3e > [<ffffffff813045b3>] device_add+0x3ab/0x57d > [<ffffffff8135616e>] usb_new_device+0x154/0x201 > [<ffffffff8135b42e>] usb_add_hcd+0x4c5/0x69d > [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 > [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b > [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > [<ffffffff813077ae>] __driver_attach+0x59/0x7d > [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 > [<ffffffff813073fd>] driver_attach+0x21/0x23 > [<ffffffff81306487>] bus_add_driver+0xe1/0x26b > [<ffffffff81307ad5>] driver_register+0xa3/0x11a > [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 > [<ffffffff819f403b>] uhci_hcd_init+0x88/0xc1 > [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > [<ffffffff819c1961>] kernel_init+0x172/0x1cc > [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key at: > [<ffffffff8268de38>] __key.33456+0x0/0x8 ... acquired at: > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 [<ffffffff8108f128>] > __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>] > lock_acquire+0xcd/0xf2 [<ffffffff81485526>] > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] > dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>] > uhci_alloc_qh+0x33/0x146 [<ffffffff8137af66>] > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>] > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>] > usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] > usb_control_msg+0xee/0x113 [<ffffffff813551fb>] > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] > hub_events+0x91e/0x11a2 [<ffffffff81358432>] hub_thread+0x25/0x199 > [<ffffffff8107b8fd>] kthread+0x6e/0x76 [<ffffffff81013eaa>] > child_rip+0xa/0x20 the dependencies between the lock to be acquired > and SOFTIRQ-irq-unsafe lock: -> (purge_lock){+.+...} ops: 0 { > HARDIRQ-ON-W at: [<ffffffff8108eaba>] > __lock_acquire+0x31f/0xc07 > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > [<ffffffff814853bc>] _spin_lock+0x36/0x6b > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 > [<ffffffff8110c197>] map_vm_area+0x34/0x47 > [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d > [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 > [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d > [<ffffffff819c1d99>] start_kernel+0x3de/0x426 > [<ffffffff819c12c3>] > x86_64_start_reservations+0xae/0xb2 > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 SOFTIRQ-ON-W at: > [<ffffffff8108eadc>] __lock_acquire+0x341/0xc07 > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > [<ffffffff814853bc>] _spin_lock+0x36/0x6b > [<ffffffff8110aa20>] > __purge_vmap_area_lazy+0x54/0x18a > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 > [<ffffffff8110c197>] map_vm_area+0x34/0x47 > [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d > [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 > [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d > [<ffffffff819c1d99>] start_kernel+0x3de/0x426 > [<ffffffff819c12c3>] > x86_64_start_reservations+0xae/0xb2 > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 INITIAL USE at: > [<ffffffff8108eb29>] __lock_acquire+0x38e/0xc07 > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > [<ffffffff814853bc>] _spin_lock+0x36/0x6b > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 > [<ffffffff8110c197>] map_vm_area+0x34/0x47 > [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d > [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 > [<ffffffff819dfef1>] > alloc_large_system_hash+0x150/0x1fe > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d > [<ffffffff819c1d99>] start_kernel+0x3de/0x426 > [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2 > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 } ... > key at: [<ffffffff81741ef8>] purge_lock.27226+0x18/0x40 ... > acquired at: [<ffffffff8108f20c>] __lock_acquire+0xa71/0xc07 > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] > _spin_lock+0x36/0x6b [<ffffffff8110aa20>] > __purge_vmap_area_lazy+0x54/0x18a [<ffffffff8110c82f>] > vm_unmap_aliases+0x167/0x176 [<ffffffff8100d7ca>] > xen_create_contiguous_region+0x51/0x106 [<ffffffff81250d84>] > xen_swiotlb_alloc_coherent+0x62/0xa6 [<ffffffff8111188c>] > dma_pool_alloc+0x136/0x2a8 [<ffffffff81370efe>] > ehci_qh_alloc+0x44/0x107 [<ffffffff81373f5d>] > ehci_pci_setup+0x22a/0x9c1 [<ffffffff8135b18e>] > usb_add_hcd+0x225/0x69d [<ffffffff8136907b>] > usb_hcd_pci_probe+0x270/0x3b1 [<ffffffff8125a8ad>] > local_pci_probe+0x17/0x1b [<ffffffff8125b4c4>] > pci_device_probe+0xcb/0xf7 [<ffffffff81307635>] > driver_probe_device+0xf8/0x218 [<ffffffff813077ae>] > __driver_attach+0x59/0x7d [<ffffffff813069e1>] > bus_for_each_dev+0x54/0x83 [<ffffffff813073fd>] > driver_attach+0x21/0x23 [<ffffffff81306487>] > bus_add_driver+0xe1/0x26b [<ffffffff81307ad5>] > driver_register+0xa3/0x11a [<ffffffff8125b71b>] > __pci_register_driver+0x65/0xc2 [<ffffffff819f3ee0>] > ehci_hcd_init+0x7f/0xc0 [<ffffffff8100a07e>] > do_one_initcall+0x73/0x18b [<ffffffff819c1961>] > kernel_init+0x172/0x1cc [<ffffffff81013eaa>] child_rip+0xa/0x20 -> > (&retval->lock){......} ops: 0 { INITIAL USE at: > [<ffffffff8108eb29>] __lock_acquire+0x38e/0xc07 > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 > [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 > [<ffffffff81370efe>] ehci_qh_alloc+0x44/0x107 > [<ffffffff81373f5d>] ehci_pci_setup+0x22a/0x9c1 > [<ffffffff8135b18e>] usb_add_hcd+0x225/0x69d > [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 > [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b > [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > [<ffffffff813077ae>] __driver_attach+0x59/0x7d > [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 > [<ffffffff813073fd>] driver_attach+0x21/0x23 > [<ffffffff81306487>] bus_add_driver+0xe1/0x26b > [<ffffffff81307ad5>] driver_register+0xa3/0x11a > [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 > [<ffffffff819f3ee0>] ehci_hcd_init+0x7f/0xc0 > [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > [<ffffffff819c1961>] kernel_init+0x172/0x1cc > [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key at: > [<ffffffff824dc3c4>] __key.24188+0x0/0x1c ... acquired at: > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 [<ffffffff8108f128>] > __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>] > lock_acquire+0xcd/0xf2 [<ffffffff81485526>] > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] > dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>] > uhci_alloc_qh+0x33/0x146 [<ffffffff8137af66>] > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>] > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>] > usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] > usb_control_msg+0xee/0x113 [<ffffffff813551fb>] > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] > hub_events+0x91e/0x11a2 [<ffffffff81358432>] hub_thread+0x25/0x199 > [<ffffffff8107b8fd>] kthread+0x6e/0x76 [<ffffffff81013eaa>] > child_rip+0xa/0x20 stack backtrace: Pid: 100, comm: khubd Not tainted > 2.6.32.9 #1 Call Trace: [<ffffffff8108cd50>] check_usage+0x331/0x345 > [<ffffffff81032d79>] ? pvclock_clocksource_read+0x47/0x80 > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 [<ffffffff8108f128>] > __lock_acquire+0x98d/0xc07 [<ffffffff8111008c>] ? > sys_swapoff+0x870/0x9d0 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > [<ffffffff8111178c>] ? dma_pool_alloc+0x36/0x2a8 [<ffffffff81485526>] > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] ? > dma_pool_alloc+0x36/0x2a8 [<ffffffff8111178c>] > dma_pool_alloc+0x36/0x2a8 [<ffffffff8111a986>] ? init_object+0x73/0x7b > [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf > [<ffffffff8100f452>] ? check_events+0x12/0x20 [<ffffffff8137aa7b>] > uhci_alloc_qh+0x33/0x146 [<ffffffff8111dda9>] ? > kmem_cache_alloc+0xd9/0x150 [<ffffffff8137af66>] > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135a29c>] ? > dma_map_single_attrs+0xb4/0xc6 [<ffffffff8135be92>] > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8100ed81>] ? > xen_force_evtchn_callback+0xd/0xf [<ffffffff8100ed81>] ? > xen_force_evtchn_callback+0xd/0xf [<ffffffff8100f452>] ? > check_events+0x12/0x20 [<ffffffff8108b9ea>] ? > lockdep_init_map+0x9f/0x115 [<ffffffff8135c6b2>] > usb_submit_urb+0x297/0x2f1 [<ffffffff8107beb6>] ? > __init_waitqueue_head+0x3a/0x4c [<ffffffff8135d51f>] > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8100f452>] ? > check_events+0x12/0x20 [<ffffffff8135c939>] ? usb_alloc_urb+0x21/0x4b > [<ffffffff8135c907>] ? usb_init_urb+0x2a/0x3b [<ffffffff8135d8a1>] > usb_control_msg+0xee/0x113 [<ffffffff8111c5ef>] ? > kmem_cache_alloc_notrace+0xe8/0x111 [<ffffffff8135517a>] ? > hub_port_init+0x29c/0x7e4 [<ffffffff813551fb>] > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] hub_events+0x91e/0x11a2 > [<ffffffff8135840d>] ? hub_thread+0x0/0x199 [<ffffffff81358432>] > hub_thread+0x25/0x199 [<ffffffff8107bb4f>] ? > autoremove_wake_function+0x0/0x3d [<ffffffff8107b8fd>] > kthread+0x6e/0x76 [<ffffffff81013eaa>] child_rip+0xa/0x20 > [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > [<ffffffff81013810>] ? restore_args+0x0/0x30 [<ffffffff8107b9f2>] ? > kthreadd+0xed/0x10f [<ffffffff81013ea0>] ? child_rip+0x0/0x20 ata1: > SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: Hitachi > HDT721025SLA380, STBOA3AA, max UDMA/133 ata1.00: 488397168 sectors, > multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 > scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 > ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 > GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] > Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd > 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk > Freeing unused kernel memory: 3396k freed Write protecting the kernel > read-only data: 6988k Red Hat nash version 5.1.19.6 starting Mounting > proc filesystem Mounting sysfs filesystem Creating /dev Creating initial > device nodes Setting up hotplug. usb 7-1: New USB device found, > idVendor=0458, idProduct=0007 usb 7-1: New USB device strings: Mfr=2, > Product=1, SerialNumber=0 usb 7-1: Product: Optical Mouse usb 7-1: > Manufacturer: KYE usb 7-1: configuration #1 chosen from 1 choice input: > KYE Optical Mouse as > /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input3 > generic-usb 0003:0458:0007.0001: input,hidraw0: USB HID v1.10 Mouse [KYE > Optical Mouse] on usb-0000:00:1d.1-1/input0 Creating block device nodes. > Loading aacraid.ko module Adaptec aacraid driver 1.1-5[2461]-ms Scanning > and configuring dmraid supported devices Scanning logical volumes > Reading all physical volumes. This may take a while... Activating > logical volumes Volume group "VolGroup01" not found Trying to resume > from /dev/VolGroup01/LogVol01 Unable to access resume device > (/dev/VolGroup01/LogVol01) Creating root device. Mounting root > filesystem. mount: could not find filesystem '/dev/root' Setting up > other filesystems. Setting up new root fs setuproot: moving /dev failed: > No such file or directory no fstab.sys, mounting internal defaults > setuproot: error mounting /proc: No such file or directory setuproot: > error mounting /sys: No such file or directory Switching to new root and > running init. unmounting old /dev unmounting old /proc unmounting old > /sys switchroot: mount failed: No such file or directory init used > greatest stack depth: 4088 bytes left Kernel panic - not syncing: > Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.32.9 #1 Call > Trace: [<ffffffff8105b73f>] panic+0xa5/0x167 [<ffffffff8100ed81>] ? > xen_force_evtchn_callback+0xd/0xf [<ffffffff8105f2ab>] ? > do_exit+0x38a/0x701 [<ffffffff8100f43f>] ? > xen_restore_fl_direct_end+0x0/0x1 [<ffffffff8108f81b>] ? > lock_release+0x179/0x184 [<ffffffff8108ca1d>] ? > trace_hardirqs_on+0xd/0xf [<ffffffff81484fcf>] ? > _write_unlock_irq+0x37/0x3c [<ffffffff8105ef9f>] do_exit+0x7e/0x701 > [<ffffffff8105f6be>] sys_exit_group+0x0/0x1b [<ffffffff8105f6d5>] > sys_exit_group+0x17/0x1b [<ffffffff81012d72>] > system_call_fastpath+0x16/0x1b > > References > > Visible links > 1. mailto:pasik@iki.fi > 2. mailto:pasik@iki.fi > 3. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 4. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 5. mailto:pasik@iki.fi > 6. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 7. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 8. mailto:pasik@iki.fi > 9. mailto:pasik@iki.fi > 10. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 11. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 12. mailto:pasik@iki.fi > 13. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 14. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 15. mailto:pasik@iki.fi > 16. mailto:dm-devel@redhat.com ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-16 22:29 ` Re: [Xen-users] " Pasi Kärkkäinen @ 2010-03-16 22:40 ` kishore kumar 2010-03-16 23:18 ` Pasi Kärkkäinen 0 siblings, 1 reply; 32+ messages in thread From: kishore kumar @ 2010-03-16 22:40 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users [-- Attachment #1.1: Type: text/plain, Size: 78676 bytes --] I am not sure. Can you please let me know how to check this? any command ?? On Tue, Mar 16, 2010 at 3:29 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote: > On Tue, Mar 16, 2010 at 03:22:50PM -0700, kishore kumar wrote: > > attached is the log captured in with the word document . > > > > Scanning logical volumes > Reading all physical volumes. This may take a while... > Activating logical volumes > Volume group "VolGroup01" not found > Trying to resume from /dev/VolGroup01/LogVol01 > Unable to access resume device (/dev/VolGroup01/LogVol01) > Creating root device. > Mounting root filesystem. > mount: could not find filesystem '/dev/root' > Setting up other filesystems. > Setting up new root fs > setuproot: moving /dev failed: No such file or directory > no fstab.sys, mounting internal defaults > setuproot: error mounting /proc: No such file or directory > setuproot: error mounting /sys: No such file or directory > Switching to new root and running init. > unmounting old /dev > unmounting old /proc > unmounting old /sys > switchroot: mount failed: No such file or directory > init used greatest stack depth: 4088 bytes left > Kernel panic - not syncing: Attempted to kill init! > > So it seems it gets all the way to executing the initrd image, > which then fails to mount the root fs. > > Earlier in the log: > > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA, max UDMA/133 > ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA > ata1.00: configured for UDMA/133 > scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 ANSI: > 5 > sd 0:0:0:0: Attached scsi generic sg0 type 0 > sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sda: sda1 sda2 > sd 0:0:0:0: [sda] Attached SCSI disk > > so /dev/sda was detected. Is your root lvm volume on /dev/sda ? > Is /dev/VolGroup01/LogVol01 really your root fs? > > -- Pasi > > > > > > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi Kärkkäinen <[1]pasik@iki.fi> > wrote: > > > > On Tue, Mar 16, 2010 at 02:56:06PM -0700, kishore kumar wrote: > > > Please find the attached log file after fixing the dom 0 kernel > cmd > > line > > > as below > > > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen > > nomodeset > > > > > > > There's something wrong with the log, the dom0 kernel parts are all > on > > one line.. > > It's really difficult to read it. > > > > -- Pasi > > > > > Thanks > > > > > > > > > On Tue, Mar 16, 2010 at 2:29 PM, Pasi Kärkkäinen > > <[1][2]pasik@iki.fi> wrote: > > > > > > On Tue, Mar 16, 2010 at 02:16:22PM -0700, kishore kumar > wrote: > > > > I did below steps. > > > > > > > > > > > > I pulled DOM 0 kernel from > > > > git clone > > > > > git://[1][2][3] > git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > linux-2.6-xen > > > > > > > > cd linux-2.6-xen > > > > > > > > make clean > > > > > > > > cp -a .config .config-old > > > > > > > > wget -O .config > > > > > > > > > [2][3][4] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > make oldconfig > > > > > > > > make bzImage > > > > > > > > make modules > > > > > > > > make modules_install > > > > > > > > cp -a .config /boot/config-2.6.32.9 > > > > > > > > cp -a System.map /boot/System.map-2.6.32.9 > > > > > > > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.9 > > > > > > > > and modified the grub.conf as below > > > > > > > > > > > > Root(hd0,0) > > > > > > > > kernel /xen.gz console=vga,com1 com1=115200,8n1 msi=1 > > iommu=1 > > > > > > > > module /vmlinuz-2.6.32.9 ro > root=/dev/VolGroup01/LogVo100 > > rhgb > > > quiet > > > > > > > > module /initrd-2.6.32.9.img > > > > > > > > > > > > and rebooted the machine. Then It booted with some xen > > messages > > > and > > > > stopped. Those were the messages captured from serial > > console. > > > > > > > > Please let me know if I did something wrong here. > > > > > > > > > > Please fix the kernel cmdline based on my earlier email, and > > capture and > > > post the > > > serial console log again! > > > > > > -- Pasi > > > > > > > > > > > > On Tue, Mar 16, 2010 at 1:20 PM, Pasi Kärkkäinen > > > <[3][4][5]pasik@iki.fi> wrote: > > > > > > > > On Tue, Mar 16, 2010 at 01:16:28PM -0700, Jeremy > > Fitzhardinge > > > wrote: > > > > > On 03/16/2010 12:48 PM, Pasi Kärkkäinen wrote: > > > > >> On Tue, Mar 16, 2010 at 09:43:44PM +0200, Pasi > > Kärkkäinen > > > wrote: > > > > >> > > > > >>> On Tue, Mar 16, 2010 at 10:32:17AM -0700, kishore > > kumar > > > wrote: > > > > >>> > > > > >>>> Attached is the output captured from serial > > console. > > > > >>>> > > > > >>>> Machine does not boot after compiling xen > 3.4.3 > > with > > > pv_ops dom > > > > 0 kernel. > > > > >>>> > > > > >>>> Please let me know what is going wrong here. > > > > >>>> > > > > >>>> > > > > >>> Ok this looks like a bug that is already being > sorted > > out on > > > > xen-devel mailinglist. > > > > >>> I added CC to xen-devel. > > > > >>> > > > > >>> > > > > >> > > > > > > > > > > Those messages are not a problem in themselves, but > the > > related > > > > problem > > > > > is believed to be fixed in current > xen/stable-2.6.32.x. > > It > > > looks like > > > > > the output stops there because the Xen console isn't > set > > up > > > properly > > > > for > > > > > some reason. > > > > > > > > > > > > > Yeah, remove "rhgb quiet" from the options.. the dom0 > > kernel > > > cmdline > > > > should be like this: > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 > > earlyprintk=xen > > > nomodeset > > > > -- Pasi > > > > > > > > References > > > > > > > > Visible links > > > > 1. > > [5][6]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > 2. > > > > > [6][7] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > 3. mailto:[7][8]pasik@iki.fi > > > > > > References > > > > > > Visible links > > > 1. mailto:[9]pasik@iki.fi > > > 2. > > [10]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 3. > > [11] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 4. mailto:[12]pasik@iki.fi > > > 5. > > [13]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 6. > > [14] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 7. mailto:[15]pasik@iki.fi > > > Asserting Post complete GPIO!!! > > > Transfer control to CSM 16-bit binary for legacy boot > > > __ __ _____ _ _ _____ _ _ > > > \ \/ /___ _ __ |___ /| || | |___ / _ __ ___| || | _ __ > _ > > __ ___ > > > \ // _ \ '_ \ |_ \| || |_ |_ \ __| '__/ __| || |_ __| '_ > \| > > '__/ _ \ > > > / \ __/ | | | ___) |__ _| ___) |__| | | (__|__ _|__| |_) > | | > > | __/ > > > /_/\_\___|_| |_| |____(_) |_|(_)____/ |_| \___| |_| | > .__/|_| > > \___| > > > |_| > > > (XEN) Xen version 3.4.3-rc4-pre (kishore@localdomain) (gcc > version > > 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar 15 13:44:31 PDT 2010 > > > (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 2010 +0000 > > 19924:6e72f8c3c017 > > > (XEN) Command line: console=vga,com1 com1=115200,8n1 msi=1 iommu=1 > > > (XEN) Video information: > > > (XEN) VGA is text mode 80x25, font 8x16 > > > (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds > > > (XEN) EDID info not retrieved because no DDC retrieval method > > detected > > > (XEN) Disc information: > > > (XEN) Found 1 MBR signatures > > > (XEN) Found 1 EDD information structures > > > (XEN) Xen-e820 RAM map: > > > (XEN) 0000000000000000 - 000000000009d000 (usable) > > > (XEN) 000000000009d000 - 00000000000a0000 (reserved) > > > (XEN) 00000000000e0000 - 0000000000100000 (reserved) > > > (XEN) 0000000000100000 - 000000006d597000 (usable) > > > (XEN) 000000006d597000 - 000000006d686000 (reserved) > > > (XEN) 000000006d686000 - 000000006f598000 (usable) > > > (XEN) 000000006f598000 - 000000006f59a000 (reserved) > > > (XEN) 000000006f59a000 - 000000006f5af000 (ACPI NVS) > > > (XEN) 000000006f5af000 - 000000006f5d9000 (reserved) > > > (XEN) 000000006f5d9000 - 000000006f5f9000 (ACPI data) > > > (XEN) 000000006f5f9000 - 000000006f6df000 (ACPI NVS) > > > (XEN) 000000006f6df000 - 000000006f700000 (ACPI data) > > > (XEN) 000000006f700000 - 0000000080000000 (reserved) > > > (XEN) 00000000a0000000 - 00000000b0000000 (reserved) > > > (XEN) 00000000fc000000 - 00000000fd000000 (reserved) > > > (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) > > > (XEN) 00000000ffc00000 - 0000000100000000 (reserved) > > > (XEN) System RAM: 1780MB (1823000kB) > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL ) > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL THRLY 0 > > 1000013) > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL THRLY 0 MSFT > > 100000D) > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL THRLY 3 MSFT > > 100000D) > > > (XEN) ACPI: FACS 6F5F9000, 0040 > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL THRLY 0 MSFT > > 100000D) > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL THRLY 1 MSFT > > 100000D) > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL THRLY 1 MSFT > > 100000D) > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL THRLY 1 MSFT > > 100000D) > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL THRLY 0 MSFT > > 100000D) > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 INTEL SSDT PM 4000 INTL > > 20061109) > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL THRLY 1 MSFT > > 100000D) > > > (XEN) Domain heap initialised > > > (XEN) Processor #0 6:12 APIC version 21 > > > (XEN) Processor #2 6:12 APIC version 21 > > > (XEN) Processor #4 6:12 APIC version 21 > > > (XEN) Processor #16 6:12 APIC version 21 > > > (XEN) Processor #18 6:12 APIC version 21 > > > (XEN) Processor #20 6:12 APIC version 21 > > > (XEN) Processor #1 6:12 APIC version 21 > > > (XEN) Processor #3 6:12 APIC version 21 > > > (XEN) Processor #5 6:12 APIC version 21 > > > (XEN) Processor #17 6:12 APIC version 21 > > > (XEN) Processor #19 6:12 APIC version 21 > > > (XEN) Processor #21 6:12 APIC version 21 > > > (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI > 0-23 > > > (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec90000, GSI > 24-47 > > > (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs > > > (XEN) Intel VT-d DMAR tables have been parsed. > > > (XEN) Using scheduler: SMP Credit Scheduler (credit) > > > (XEN) Detected 3200.207 MHz processor. > > > (XEN) VMX: Supported advanced features: > > > (XEN) - APIC MMIO access virtualisation > > > (XEN) - APIC TPR shadow > > > (XEN) - Extended Page Tables (EPT) > > > (XEN) - Virtual-Processor Identifiers (VPID) > > > (XEN) - Virtual NMI > > > (XEN) - MSR direct-access bitmap > > > (XEN) VMX: EPT is available. > > > (XEN) VMX: VPID is available. > > > (XEN) HVM: VMX enabled > > > (XEN) HVM: Hardware Assisted Paging detected. > > > (XEN) CPU0: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > > stepping 00 > > > (XEN) Booting processor 1/2 eip 88000 > > > (XEN) CPU1: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > > stepping 00 > > > (XEN) Booting processor 2/4 eip 88000 > > > (XEN) CPU2: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > > stepping 00 > > > (XEN) Booting processor 3/16 eip 88000 > > > (XEN) CPU3: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > > stepping 00 > > > (XEN) Booting processor 4/18 eip 88000 > > > (XEN) CPU4: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > > stepping 00 > > > (XEN) Booting processor 5/20 eip 88000 > > > (XEN) CPU5: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > > stepping 00 > > > (XEN) Booting processor 6/1 eip 88000 > > > (XEN) CPU6: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > > stepping 00 > > > (XEN) Booting processor 7/3 eip 88000 > > > (XEN) CPU7: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > > stepping 00 > > > (XEN) Booting processor 8/5 eip 88000 > > > (XEN) CPU8: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > > stepping 00 > > > (XEN) Booting processor 9/17 eip 88000 > > > (XEN) CPU9: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > > stepping 00 > > > (XEN) Booting processor 10/19 eip 88000 > > > (XEN) CPU10: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > > stepping 00 > > > (XEN) Booting processor 11/21 eip 88000 > > > (XEN) CPU11: Intel Genuine Intel(R) CPU 000 @ 3.20GHz > > stepping 00 > > > (XEN) Total of 12 processors activated. > > > (XEN) ENABLING IO-APIC IRQs > > > (XEN) -> Using new ACK method > > > (XEN) checking TSC synchronization across 12 CPUs: passed. > > > (XEN) Platform timer is 14.318MHz HPET > > > ?(XEN) Brought up 12 CPUs > > > (XEN) Intel VT-d Snoop Control supported. > > > (XEN) Intel VT-d DMA Passthrough not supported. > > > (XEN) Intel VT-d Queued Invalidation supported. > > > (XEN) Intel VT-d Interrupt Remapping supported. > > > (XEN) I/O virtualisation enabled > > > (XEN) I/O virtualisation for PV guests disabled > > > (XEN) xenoprof: Initialization failed. Intel processor model 44 > for P6 > > class family is not supported > > > (XEN) *** LOADING DOMAIN 0 *** > > > (XEN) Xen kernel: 64-bit, lsb, compat32 > > > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x26bb000 > > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > > (XEN) Dom0 alloc.: 0000000064000000->0000000068000000 (404490 > pages > > to be allocated) > > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > > (XEN) Loaded kernel: ffffffff81000000->ffffffff826bb000 > > > (XEN) Init. ramdisk: ffffffff826bb000->ffffffff82d0d800 > > > (XEN) Phys-Mach map: ffffffff82d0e000->ffffffff83044050 > > > (XEN) Start info: ffffffff83045000->ffffffff830454b4 > > > (XEN) Page tables: ffffffff83046000->ffffffff83063000 > > > (XEN) Boot stack: ffffffff83063000->ffffffff83064000 > > > (XEN) TOTAL: ffffffff80000000->ffffffff83400000 > > > (XEN) ENTRY ADDRESS: ffffffff819c1200 > > > (XEN) Dom0 has maximum 12 VCPUs > > > (XEN) Scrubbing Free RAM: .done. > > > (XEN) Xen trace buffers: disabled > > > (XEN) Std. Loglevel: Errors and warnings > > > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) > > > (XEN) Xen is relinquishing VGA console. > > > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to > switch > > input to Xen) > > > (XEN) Freed 128kB init memory. > > > mapping kernel into physical memory > > > Xen: setup ISA identity maps > > > about to get started... > > > Initializing cgroup subsys cpuset > > > Initializing cgroup subsys cpu > > > Linux version 2.6.32.9 (kishore@localhost.localdomain) (gcc > version > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 15 15:16:28 PDT > 2010 > > > Command line: ro root=/dev/VolGroup01/LogVol00 console=hvc0 > > earlyprintk=xen nomodeset > > > KERNEL supported cpus: > > > Intel GenuineIntel > > > AMD AuthenticAMD > > > Centaur CentaurHauls > > > BIOS-provided physical RAM map: > > > Xen: 0000000000000000 - 000000000009d000 (usable) > > > Xen: 000000000009d000 - 0000000000100000 (reserved) > > > Xen: 0000000000100000 - 0000000066c0a000 (usable) > > > Xen: 000000006d597000 - 000000006d686000 (reserved) > > > Xen: 000000006f598000 - 000000006f59a000 (reserved) > > > Xen: 000000006f59a000 - 000000006f5af000 (ACPI NVS) > > > Xen: 000000006f5af000 - 000000006f5d9000 (reserved) > > > Xen: 000000006f5d9000 - 000000006f5f9000 (ACPI data) > > > Xen: 000000006f5f9000 - 000000006f6df000 (ACPI NVS) > > > Xen: 000000006f6df000 - 000000006f700000 (ACPI data) > > > Xen: 000000006f700000 - 0000000080000000 (reserved) > > > Xen: 00000000a0000000 - 00000000b0000000 (reserved) > > > Xen: 00000000fc000000 - 00000000fd000000 (reserved) > > > Xen: 00000000fed1c000 - 00000000fed20000 (reserved) > > > Xen: 00000000ffc00000 - 0000000100000000 (reserved) > > > bootconsole [xenboot0] enabled > > > DMI 2.4 present. > > > last_pfn = 0x66c0a max_arch_pfn = 0x400000000 > > > init_memory_mapping: 0000000000000000-0000000066c0a000 > > > RAMDISK: 026bb000 - 02d0d800 > > > ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL ) > > > ACPI: XSDT 000000006f6fe120 00064 (v01 INTEL THRLY 00000000 > > 01000013) > > > ACPI: FACP 000000006f6fd000 000F4 (v04 INTEL THRLY 00000000 > MSFT > > 0100000D) > > > ACPI: DSDT 000000006f6f5000 074F1 (v02 INTEL THRLY 00000003 > MSFT > > 0100000D) > > > ACPI: FACS 000000006f5f9000 00040 > > > ACPI: APIC 000000006f6f4000 001CC (v02 INTEL THRLY 00000000 > MSFT > > 0100000D) > > > ACPI: MCFG 000000006f6f3000 0003C (v01 INTEL THRLY 00000001 > MSFT > > 0100000D) > > > ACPI: HPET 000000006f6f2000 00038 (v01 INTEL THRLY 00000001 > MSFT > > 0100000D) > > > ACPI: SLIT 000000006f6f1000 00030 (v01 INTEL THRLY 00000001 > MSFT > > 0100000D) > > > ACPI: WDDT 000000006f6f0000 00040 (v01 INTEL THRLY 00000000 > MSFT > > 0100000D) > > > ACPI: SSDT 000000006f5d9000 1FDDC (v01 INTEL SSDT PM 00004000 > INTL > > 20061109) > > > ACPI: 000000006f6ee000 001D0 (v01 INTEL THRLY 00000001 > MSFT > > 0100000D) > > > No NUMA configuration found > > > Faking a node at 0000000000000000-0000000066c0a000 > > > Bootmem setup node 0 0000000000000000-0000000066c0a000 > > > NODE_DATA [0000000000008000 - 000000000001ffff] > > > bootmap [0000000000020000 - 000000000002cd87] pages d > > > (9 early reservations) ==> bootmem [0000000000 - 0066c0a000] > > > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - > > 0000001000] > > > #1 [0003046000 - 0003063000] XEN PAGETABLES ==> [0003046000 - > > 0003063000] > > > #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - > > 0000008000] > > > #3 [0001000000 - 000269ae98] TEXT DATA BSS ==> [0001000000 - > > 000269ae98] > > > #4 [00026bb000 - 0002d0d800] RAMDISK ==> [00026bb000 - > > 0002d0d800] > > > #5 [0002d0e000 - 0003046000] XEN START INFO ==> [0002d0e000 - > > 0003046000] > > > #6 [000269b000 - 000269b011] BRK ==> [000269b000 - > > 000269b011] > > > #7 [0000100000 - 000041a000] PGTABLE ==> [0000100000 - > > 000041a000] > > > #8 [0000001000 - 0000001030] ACPI SLIT ==> [0000001000 - > > 0000001030] > > > found SMP MP-table at [ffff8800000fd750] fd750 > > > Zone PFN ranges: > > > DMA 0x00000000 -> 0x00001000 > > > DMA32 0x00001000 -> 0x00100000 > > > Normal 0x00100000 -> 0x00100000 > > > Movable zone start PFN for each node > > > early_node_map[2] active PFN ranges > > > 0: 0x00000000 -> 0x0000009d > > > 0: 0x00000100 -> 0x00066c0a > > > ACPI: PM-Timer IO Port: 0x408 > > > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) > > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) > > > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled) > > > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled) > > > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) > > > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] enabled) > > > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) > > > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] enabled) > > > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled) > > > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled) > > > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled) > > > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) > > > ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1]) > > > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > > > IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 > > > ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24]) > > > IOAPIC[1]: apic_id 9, version 0, address 0xfec90000, GSI 24-24 > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > > ERROR: Unable to locate IOAPIC for GSI 2 > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > > > ERROR: Unable to locate IOAPIC for GSI 9 > > > Using ACPI (MADT) for SMP configuration information > > > ACPI: HPET id: 0x8086a401 base: 0xfed00000 > > > SMP: Allowing 12 CPUs, 0 hotplug CPUs > > > PM: Registered nosave memory: 000000000009d000 - 0000000000100000 > > > Allocating PCI resources starting at b0000000 (gap: > b0000000:4c000000) > > > Booting paravirtualized kernel on Xen > > > Xen version: 3.4.3-rc4-pre (preserve-AD) (dom0) > > > NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1 > > > PERCPU: Embedded 478 pages/cpu @ffff880005ebc000 s1928024 r8192 > d21672 > > u1957888 > > > pcpu-alloc: s1928024 r8192 d21672 u1957888 alloc=478*4096 > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] > 07 > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 > > > Xen: using vcpu_info placement > > > Built 1 zonelists in Node order, mobility grouping on. Total > pages: > > 409291 > > > Policy zone: DMA32 > > > Kernel command line: ro root=/dev/VolGroup01/LogVol00 console=hvc0 > > earlyprintk=xen nomodeset > > > PID hash table entries: 4096 (order: 3, 32768 bytes) > > > Initializing CPU#0 > > > DMA: Placing 64MB software IO TLB between ffff880007525000 - > > ffff88000b525000 > > > DMA: software IO TLB at phys 0x7525000 - 0xb525000 > > > xen_swiotlb_fixup: buf=ffff880007525000 size=67108864 > > > xen_swiotlb_fixup: buf=ffff88000b585000 size=32768 > > > Memory: 1514268k/1683496k available (4654k kernel code, 396k > absent, > > 168832k reserved, 3443k data, 3396k init) > > > SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=12, > > Nodes=1 > > > Hierarchical RCU implementation. > > > NR_IRQS:4352 nr_irqs:3072 > > > Already setup the GSI :0 > > > Already setup the GSI :1 > > > Already setup the GSI :2 > > > Already setup the GSI :3 > > > Already setup the GSI :4 > > > Already setup the GSI :5 > > > Already setup the GSI :6 > > > Already setup the GSI :7 > > > Already setup the GSI :8 > > > Already setup the GSI :9 > > > Already setup the GSI :10 > > > Already setup the GSI :11 > > > Already setup the GSI :12 > > > Already setup the GSI :13 > > > Already setup the GSI :14 > > > Already setup the GSI :15 > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > > > xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 > > > xen_allocate_pirq: returning irq 9 for gsi 9 > > > Already setup the GSI :9 > > > xen: acpi sci 9 > > > Console: colour VGA+ 80x25 > > > console [hvc0] enabled, bootconsole disabled console [hvc0] > enabled, > > bootconsole disabled > > > Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: > 48 > > ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 > ... > > MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 > ... > > CHAINHASH_SIZE: 16384 memory used by lock dependency info: > > 6367 kB per task-struct memory footprint: 2688 bytes allocated > 17039360 > > bytes of page_cgroup please try 'cgroup_disable=memory' option if > you > > don't want memory cgroups installing Xen timer for CPU 0 Detected > > 3200.206 MHz processor. Calibrating delay loop (skipped), value > > calculated using timer frequency.. 6400.41 BogoMIPS (lpj=3200206) > > Security Framework initialized SELinux: Initializing. Dentry cache > hash > > table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash > table > > entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table > > entries: 256 Initializing cgroup subsys ns Initializing cgroup > subsys > > cpuacct Initializing cgroup subsys memory Initializing cgroup subsys > > devices Initializing cgroup subsys freezer Initializing cgroup > subsys > > net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K > CPU: > > L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU: Unsupported number of > siblings > > 32 Performance Events: unsupported p6 CPU model 44 no PMU driver, > > software events only. lockdep: fixing up alternatives. SMP > alternatives: > > switching to UP code ACPI: Core revision 20090903 ftrace: converting > > mcount calls to 0f 1f 44 00 00 ftrace: allocating 27971 entries in > 110 > > pages installing Xen timer for CPU 1 lockdep: fixing up > alternatives. > > SMP alternatives: switching to SMP code Initializing CPU#1 CPU: L1 I > > cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: > 12288K > > CPU 1/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > installing > > Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I cache: 32K, L1 D > cache: > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 2/0x0 -> Node 0 > CPU: > > Unsupported number of siblings 32 installing Xen timer for CPU 3 > > Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 > cache: > > 256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node 0 CPU: Unsupported > number > > of siblings 32 installing Xen timer for CPU 4 Initializing CPU#4 > CPU: L1 > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: > 12288K > > CPU 4/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > installing > > Xen timer for CPU 5 Initializing CPU#5 CPU: L1 I cache: 32K, L1 D > cache: > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 5/0x0 -> Node 0 > CPU: > > Unsupported number of siblings 32 installing Xen timer for CPU 6 > > Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 > cache: > > 256K CPU: L3 cache: 12288K CPU 6/0x0 -> Node 0 CPU: Unsupported > number > > of siblings 32 installing Xen timer for CPU 7 Initializing CPU#7 > CPU: L1 > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: > 12288K > > CPU 7/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > installing > > Xen timer for CPU 8 Initializing CPU#8 CPU: L1 I cache: 32K, L1 D > cache: > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 8/0x0 -> Node 0 > CPU: > > Unsupported number of siblings 32 installing Xen timer for CPU 9 > > Initializing CPU#9 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 > cache: > > 256K CPU: L3 cache: 12288K CPU 9/0x0 -> Node 0 CPU: Unsupported > number > > of siblings 32 installing Xen timer for CPU 10 Initializing CPU#10 > CPU: > > L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: > > 12288K CPU 10/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > > installing Xen timer for CPU 11 Initializing CPU#11 CPU: L1 I cache: > > 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU > > 11/0x0 -> Node 0 CPU: Unsupported number of siblings 32 Brought up > 12 > > CPUs Grant table initialized regulator: core version 0.5 Time: > 14:45:00 > > Date: 03/16/10 NET: Registered protocol family 16 xenbus_probe_init > ok > > ACPI FADT declares the system doesn't support PCIe ASPM, so disable > it > > ACPI: bus type pci registered PCI: MCFG configuration 0: base > a0000000 > > segment 0 buses 0 - 255 PCI: MCFG area at a0000000 reserved in E820 > PCI: > > Using MMCONFIG at a0000000 - afffffff PCI: Using configuration type > 1 > > for base access bio: create slab <bio-0> at 0 ACPI Error: Field > [CPB3] > > at 96 exceeds Buffer [NULL] size 64 (bits) (20090903/dsopcode-596) > ACPI > > Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] > (Node > > ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI: Interpreter enabled > ACPI: > > (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing > ACPI > > Warning: Incorrect checksum in table [ ] - 97, should be DB > > (20090903/tbutils-314) ACPI: No dock devices found. ACPI: PCI Root > > Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 > D3hot > > D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: PME# > supported > > from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci > 0000:00:03.0: > > PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled > pci > > 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: > PME# > > disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci > > 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 > > D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# > > supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci > > 0000:00:08.0: PME# supported from D0 D3hot D3cold pci 0000:00:08.0: > PME# > > disabled pci 0000:00:09.0: PME# supported from D0 D3hot D3cold pci > > 0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME# supported from D0 > > D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:13.0: PME# > > supported from D0 D3hot D3cold pci 0000:00:13.0: PME# disabled pci > > 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: > PME# > > disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci > > 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 > > D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# > > supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci > > 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: > PME# > > disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 > > ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by > ICH6 > > GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 > (mask > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 > (mask > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0600 > (mask > > 001f) pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: > PME# > > disabled pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci > > 0000:01:00.0: PME# disabled pci 0000:01:00.1: PME# supported from D0 > > D3hot D3cold pci 0000:01:00.1: PME# disabled pci 0000:0c:00.0: > disabling > > ASPM on pre-1.1 PCIe device. You can enable it with > 'pcie_aspm=force' > > pci 0000:00:1e.0: transparent bridge ACPI: PCI Root Bridge [PCI1] > > (0000:fe) ACPI: PCI Root Bridge [PCI2] (0000:ff) ACPI: PCI Interrupt > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt > Link > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, > disabled. > > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) > > xenbus_probe_backend_init bus registered ok > xenbus_probe_frontend_init > > bus registered ok xen_balloon: Initialising balloon driver with page > > order 0. vgaarb: device added: > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: > loaded > > SCSI subsystem initialized usbcore: registered new interface driver > > usbfs usbcore: registered new interface driver hub usbcore: > registered > > new device driver usb PCI: Using ACPI for IRQ routing NetLabel: > > Initializing NetLabel: domain hash size = 128 NetLabel: protocols > = > > UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default > > Switching to clocksource xen kstop/0 used greatest stack depth: 6568 > > bytes left kstop/1 used greatest stack depth: 6536 bytes left pnp: > PnP > > ACPI init ACPI: bus type pnp registered xen_allocate_pirq: returning > irq > > 8 for gsi 8 Already setup the GSI :8 xen_allocate_pirq: returning > irq 13 > > for gsi 13 Already setup the GSI :13 pnp: PnP ACPI: found 13 devices > > ACPI: ACPI bus type pnp unregistered system 00:07: ioport range > > 0x500-0x53f has been reserved system 00:07: ioport range 0x400-0x47f > has > > been reserved system 00:07: ioport range 0x800-0x81f has been > reserved > > system 00:07: ioport range 0x2f8-0x2ff has been reserved system > 00:07: > > iomem range 0xfed1c000-0xfed8bffe could not be reserved system > 00:07: > > iomem range 0xff000000-0xffffffff could not be reserved system > 00:07: > > iomem range 0xfee00000-0xfeefffff has been reserved system 00:07: > iomem > > range 0xfe900000-0xfe90001f has been reserved system 00:07: iomem > range > > 0xfea00000-0xfea0001f has been reserved system 00:07: iomem range > > 0xfed1b000-0xfed1bfff has been reserved pci 0000:0c:00.0: BAR 6: no > > parent found for of device [0xffff0000-0xffffffff] pci 0000:00:01.0: > PCI > > bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: > > 0x1000-0x1fff pci 0000:00:01.0: MEM window: 0xb1900000-0xb19fffff > pci > > 0000:00:01.0: PREFETCH window: disabled pci 0000:00:02.0: PCI > bridge, > > secondary bus 0000:02 pci 0000:00:02.0: IO window: disabled pci > > 0000:00:02.0: MEM window: disabled pci 0000:00:02.0: PREFETCH > > window: disabled pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 > pci > > 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM window: > > disabled pci 0000:00:03.0: PREFETCH window: disabled pci > 0000:00:04.0: > > PCI bridge, secondary bus 0000:04 pci 0000:00:04.0: IO window: > > disabled pci 0000:00:04.0: MEM window: disabled pci 0000:00:04.0: > > PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, secondary > bus > > 0000:05 pci 0000:00:05.0: IO window: disabled pci 0000:00:05.0: > MEM > > window: disabled pci 0000:00:05.0: PREFETCH window: disabled pci > > 0000:00:06.0: PCI bridge, secondary bus 0000:06 pci 0000:00:06.0: > IO > > window: disabled pci 0000:00:06.0: MEM window: disabled pci > > 0000:00:06.0: PREFETCH window: disabled pci 0000:00:07.0: PCI > bridge, > > secondary bus 0000:07 pci 0000:00:07.0: IO window: disabled pci > > 0000:00:07.0: MEM window: disabled pci 0000:00:07.0: PREFETCH > > window: disabled pci 0000:00:08.0: PCI bridge, secondary bus 0000:08 > pci > > 0000:00:08.0: IO window: disabled pci 0000:00:08.0: MEM window: > > disabled pci 0000:00:08.0: PREFETCH window: disabled pci > 0000:00:09.0: > > PCI bridge, secondary bus 0000:09 pci 0000:00:09.0: IO window: > > 0x3000-0x3fff pci 0000:00:09.0: MEM window: 0xb1b00000-0xb1cfffff > pci > > 0000:00:09.0: PREFETCH window: 0x000000b1d00000-0x000000b1efffff > pci > > 0000:00:0a.0: PCI bridge, secondary bus 0000:0a pci 0000:00:0a.0: > IO > > window: disabled pci 0000:00:0a.0: MEM window: disabled pci > > 0000:00:0a.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI > bridge, > > secondary bus 0000:0b pci 0000:00:1c.0: IO window: disabled pci > > 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH > > window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0c > pci > > 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: > > 0xb1000000-0xb18fffff pci 0000:00:1c.4: PREFETCH window: > > 0x000000b0000000-0x000000b0ffffff pci 0000:00:1c.5: PCI bridge, > > secondary bus 0000:0d pci 0000:00:1c.5: IO window: disabled pci > > 0000:00:1c.5: MEM window: disabled pci 0000:00:1c.5: PREFETCH > > window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0e > pci > > 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: > > disabled pci 0000:00:1e.0: PREFETCH window: disabled pci > 0000:00:01.0: > > PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci 0000:00:02.0: PCI INT > A > > -> GSI 29 (level, low) -> IRQ 29 pci 0000:00:03.0: PCI INT A -> GSI > 24 > > (level, low) -> IRQ 24 pci 0000:00:04.0: PCI INT A -> GSI 25 (level, > > low) -> IRQ 25 pci 0000:00:05.0: PCI INT A -> GSI 26 (level, low) -> > IRQ > > 26 pci 0000:00:06.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27 pci > > 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 pci > > 0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 pci > > 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci > > 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 pci > > 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > xen_allocate_pirq: returning irq 16 for gsi 16 Already setup the GSI > :16 > > pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci > > 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 NET: > Registered > > protocol family 2 IP route cache hash table entries: 65536 (order: > 7, > > 524288 bytes) TCP established hash table entries: 262144 (order: 10, > > 4194304 bytes) TCP bind hash table entries: 65536 (order: 10, > 4718592 > > bytes) TCP: Hash tables configured (established 262144 bind 65536) > TCP > > reno registered NET: Registered protocol family 1 pci 0000:01:00.0: > > Disabling L0s pci 0000:01:00.1: Disabling L0s Trying to unpack > rootfs > > image as initramfs... Freeing initrd memory: 6474k freed DMA-API: > > preallocated 32768 debug entries DMA-API: debugging enabled by > kernel > > config PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > DMA: > > Placing 64MB software IO TLB between ffff880007525000 - > ffff88000b525000 > > DMA: software IO TLB at phys 0x7525000 - 0xb525000 audit: > initializing > > netlink socket (disabled) type=2000 audit(1268750702.035:1): > initialized > > HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk > > quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, > 4096 > > bytes) msgmni has been set to 2970 cryptomgr_test used greatest > stack > > depth: 5864 bytes left cryptomgr_test used greatest stack depth: > 5816 > > bytes left alg: No test for stdrng (krng) Block layer SCSI generic > (bsg) > > driver version 0.4 loaded (major 252) io scheduler noop registered > io > > scheduler anticipatory registered io scheduler deadline registered > io > > scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI > Core > > version: 0.5 pciehp 0000:00:09.0:pcie04: HPC vendor_id 8086 > device_id > > 3410 ss_vid 0 ss_did 0 pciehp: PCI Express Hot Plug Controller > Driver > > version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: > 0.5 > > acpiphp_glue: Slot 2 already registered by another hotplug driver > > acpiphp_glue: Slot 2 already registered by another hotplug driver > > acpiphp_glue: Slot 2 already registered by another hotplug driver > > acpiphp_glue: Slot 2 already registered by another hotplug driver > > acpiphp_glue: Slot 2 already registered by another hotplug driver > > acpiphp_glue: Slot 2 already registered by another hotplug driver > > acpiphp_glue: Slot 2 already registered by another hotplug driver > > acpiphp_glue: Slot 2 already registered by another hotplug driver > > pci-stub: invalid id string "" input: Sleep Button as > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 ACPI: Sleep > > Button [SLPB] input: Power Button as > > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button > [PWRF] > > registering netback hpet_acpi_add: no address or irqs in _CRS > > Non-volatile memory driver v1.3 Linux agpgart interface v0.103 > Serial: > > 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS1 at > I/O > > 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded > > input: Macintosh mouse button emulation as > /devices/virtual/input/input2 > > ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ahci > > 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA > mode > > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part > ccc > > ems scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : > ahci > > scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection > > status changed irq 2996 ata2: SATA max UDMA/133 abar > m2048@0xb1a00000 > > port 0xb1a00180 irq 2996 ata3: SATA max UDMA/133 abar > m2048@0xb1a00000 > > port 0xb1a00200 irq 2996 ata4: SATA max UDMA/133 abar > m2048@0xb1a00000 > > port 0xb1a00280 irq 2996 ata5: SATA max UDMA/133 abar > m2048@0xb1a00000 > > port 0xb1a00300 irq 2996 ata6: SATA max UDMA/133 abar > m2048@0xb1a00000 > > port 0xb1a00380 irq 2996 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 > > 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI > INT > > C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: EHCI Host > > Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned > bus > > number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: > irq > > 18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI > 1.00 > > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb > usb1: > > New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: > > Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32.9 > > ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: > configuration #1 > > chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports > > detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> > IRQ > > 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd > 0000:00:1d.7: > > new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: > > debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb1a01000 > ehci_hcd > > 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device > found, > > idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: > Mfr=3, > > Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller > usb > > usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd usb usb2: SerialNumber: > > 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB > 1.1 > > 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host > > Controller Interface driver xen_allocate_pirq: returning irq 16 for > gsi > > 16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI > 16 > > (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: UHCI Host Controller > > uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 > > uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020e0 usb usb3: New USB > > device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI > Host > > Controller usb usb3: Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb3: > > SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 > > choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected > uhci_hcd > > 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd > > 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB > bus > > registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io > base > > 0x000020c0 usb usb4: New USB device found, idVendor=1d6b, > idProduct=0001 > > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb > > usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux > > 2.6.32.9 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: > > configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub > > 4-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 19 for > gsi 19 > > Already setup the GSI :19 uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 > > (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: UHCI Host Controller > > uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 > > uhci_hcd 0000:00:1a.2: irq 19, io base 0x000020a0 usb usb5: New USB > > device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI > Host > > Controller usb usb5: Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb5: > > SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 > > choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected > > xen_allocate_pirq: returning irq 23 for gsi 23 Already setup the GSI > :23 > > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > > uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: > new > > USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq > 23, > > io base 0x00002080 usb usb6: New USB device found, idVendor=1d6b, > > idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, > > SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: > > Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb6: SerialNumber: > > 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected > xen_allocate_pirq: > > returning irq 19 for gsi 19 Already setup the GSI :19 uhci_hcd > > 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd > > 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB > bus > > registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io > base > > 0x00002060 usb usb7: New USB device found, idVendor=1d6b, > idProduct=0001 > > usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb > > usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux > > 2.6.32.9 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: > > configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub > > 7-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 18 for > gsi 18 > > Already setup the GSI :18 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 > > (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI Host Controller > > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 > > uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb usb8: New USB > > device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI > Host > > Controller usb usb8: Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb8: > > SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 > > choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PNP: > No > > PS/2 controller found. Probing ports directly. i8042.c: No > controller > > found. mice: PS/2 mouse device common for all mice rtc_cmos 00:03: > RTC > > can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as > rtc0 > > rtc0: alarms up to one month, y3k, 114 bytes nvram device-mapper: > > uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl > (2009-04-01) > > initialised: [16]dm-devel@redhat.com cpuidle: using governor ladder > > cpuidle: using governor menu usbcore: registered new interface > driver > > hiddev usbcore: registered new interface driver usbhid usbhid: > v2.6:USB > > HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 > max) > > CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use > > nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module > option > > or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: > (C) > > 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM > > netlink socket NET: Registered protocol family 17 registered > taskstats > > version 1 No TPM chip found, activating TPM-bypass! Magic number: > > 2:902:788 pci 0000:00:16.6: hash matches rtc_cmos 00:03: setting > system > > clock to 2010-03-16 14:45:05 UTC (1268750705) Initalizing network > drop > > monitor service ata2: SATA link down (SStatus 0 SControl 300) ata4: > SATA > > link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 > > SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata3: > SATA > > link down (SStatus 0 SControl 300) usb 7-1: new low speed USB device > > using uhci_hcd and address 2 > > ====================================================== [ INFO: > > SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] 2.6.32.9 #1 > > ------------------------------------------------------ khubd/100 > > [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: > (&retval->lock){......}, > > at: [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 and this task is > > already holding: (&uhci->lock){..-...}, at: [<ffffffff8137aedd>] > > uhci_urb_enqueue+0x46/0x7e3 which would create a new lock > dependency: > > (&uhci->lock){..-...} -> (&retval->lock){......} but this new > > dependency connects a SOFTIRQ-irq-safe lock: (&uhci->lock){..-...} > ... > > which became SOFTIRQ-irq-safe at: [<ffffffff8108ea6d>] > > __lock_acquire+0x2d2/0xc07 [<ffffffff8108f46f>] > lock_acquire+0xcd/0xf2 > > [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 > > [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c > > [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a > > [<ffffffff8135a479>] rh_timer_func+0xe/0x10 [<ffffffff810693bd>] > > run_timer_softirq+0x1a6/0x257 [<ffffffff810627e4>] > > __do_softirq+0xe6/0x1bc [<ffffffff81013fac>] > call_softirq+0x1c/0x30 > > [<ffffffff81015794>] do_softirq+0x4b/0xa7 [<ffffffff81062229>] > > irq_exit+0x4a/0x89 [<ffffffff812bf9d9>] > > xen_evtchn_do_upcall+0x156/0x172 [<ffffffff81013ffe>] > > xen_do_hypervisor_callback+0x1e/0x30 to a SOFTIRQ-irq-unsafe lock: > > (purge_lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: ... > > [<ffffffff8108eadc>] __lock_acquire+0x341/0xc07 > [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] _spin_lock+0x36/0x6b > > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > [<ffffffff8100e58c>] > > xen_alloc_ptpage+0x51/0x82 [<ffffffff8100e5d0>] > > xen_alloc_pud+0x13/0x15 [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 > > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 [<ffffffff8110c197>] > > map_vm_area+0x34/0x47 [<ffffffff8110c2cf>] > > __vmalloc_area_node+0x125/0x14d [<ffffffff8110c379>] > > __vmalloc_node+0x82/0x91 [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 > > [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe > > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d > [<ffffffff819c1d99>] > > start_kernel+0x3de/0x426 [<ffffffff819c12c3>] > > x86_64_start_reservations+0xae/0xb2 [<ffffffff819c4d5d>] > > xen_start_kernel+0x4b9/0x4c0 other info that might help us debug > this: > > 2 locks held by khubd/100: #0: (usb_address0_mutex){+.+...}, at: > > [<ffffffff81354f5f>] hub_port_init+0x81/0x7e4 #1: > > (&uhci->lock){..-...}, at: [<ffffffff8137aedd>] > > uhci_urb_enqueue+0x46/0x7e3 the dependencies between > SOFTIRQ-irq-safe > > lock and the holding lock: -> (&uhci->lock){..-...} ops: 0 { > > IN-SOFTIRQ-W at: [<ffffffff8108ea6d>] > > __lock_acquire+0x2d2/0xc07 > [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 [<ffffffff81485526>] > > _spin_lock_irqsave+0x4f/0x86 > > [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c > > [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a > > [<ffffffff8135a479>] rh_timer_func+0xe/0x10 > > [<ffffffff810693bd>] run_timer_softirq+0x1a6/0x257 > > [<ffffffff810627e4>] __do_softirq+0xe6/0x1bc > > [<ffffffff81013fac>] call_softirq+0x1c/0x30 > > [<ffffffff81015794>] do_softirq+0x4b/0xa7 > > [<ffffffff81062229>] irq_exit+0x4a/0x89 > > [<ffffffff812bf9d9>] xen_evtchn_do_upcall+0x156/0x172 > > [<ffffffff81013ffe>] xen_do_hypervisor_callback+0x1e/0x30 > > INITIAL USE at: [<ffffffff8108eb29>] > > __lock_acquire+0x38e/0xc07 > [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 [<ffffffff81485526>] > > _spin_lock_irqsave+0x4f/0x86 > [<ffffffff8137c3d7>] > > uhci_hub_control+0x74/0x401 > [<ffffffff8135bdac>] > > usb_hcd_submit_urb+0x7a6/0xa1e > > [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1 > > [<ffffffff8135d51f>] usb_start_wait_urb+0x54/0x1b1 > > [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113 > > [<ffffffff81358922>] hub_probe+0x37c/0xfaa > > [<ffffffff81360a35>] usb_probe_interface+0x15a/0x1f7 > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > [<ffffffff813077fa>] __device_attach+0x28/0x31 > > [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 > > [<ffffffff81307891>] device_attach+0x65/0x7c > > [<ffffffff8130667e>] bus_probe_device+0x27/0x3e > > [<ffffffff813045b3>] device_add+0x3ab/0x57d > > [<ffffffff8135e3ca>] usb_set_configuration+0x5b9/0x677 > > [<ffffffff81367b85>] generic_probe+0x67/0xae > > [<ffffffff813607b1>] usb_probe_device+0x7f/0x87 > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > [<ffffffff813077fa>] __device_attach+0x28/0x31 > > [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 > > [<ffffffff81307891>] device_attach+0x65/0x7c > > [<ffffffff8130667e>] bus_probe_device+0x27/0x3e > > [<ffffffff813045b3>] device_add+0x3ab/0x57d > > [<ffffffff8135616e>] usb_new_device+0x154/0x201 > > [<ffffffff8135b42e>] usb_add_hcd+0x4c5/0x69d > > [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 > > [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b > > [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > [<ffffffff813077ae>] __driver_attach+0x59/0x7d > > [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 > > [<ffffffff813073fd>] driver_attach+0x21/0x23 > > [<ffffffff81306487>] bus_add_driver+0xe1/0x26b > > [<ffffffff81307ad5>] driver_register+0xa3/0x11a > > [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 > > [<ffffffff819f403b>] uhci_hcd_init+0x88/0xc1 > > [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > [<ffffffff819c1961>] kernel_init+0x172/0x1cc > > [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key at: > > [<ffffffff8268de38>] __key.33456+0x0/0x8 ... acquired at: > > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 > [<ffffffff8108f128>] > > __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 [<ffffffff81485526>] > > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>] > > uhci_alloc_qh+0x33/0x146 [<ffffffff8137af66>] > > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>] > > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>] > > usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] > > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] > > usb_control_msg+0xee/0x113 [<ffffffff813551fb>] > > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] > > hub_events+0x91e/0x11a2 [<ffffffff81358432>] > hub_thread+0x25/0x199 > > [<ffffffff8107b8fd>] kthread+0x6e/0x76 [<ffffffff81013eaa>] > > child_rip+0xa/0x20 the dependencies between the lock to be > acquired > > and SOFTIRQ-irq-unsafe lock: -> (purge_lock){+.+...} ops: 0 { > > HARDIRQ-ON-W at: [<ffffffff8108eaba>] > > __lock_acquire+0x31f/0xc07 > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > > [<ffffffff814853bc>] _spin_lock+0x36/0x6b > > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > > [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 > > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 > > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 > > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 > > [<ffffffff8110c197>] map_vm_area+0x34/0x47 > > [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d > > [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 > > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 > > [<ffffffff819dfef1>] > alloc_large_system_hash+0x150/0x1fe > > [<ffffffff819e28c5>] > vfs_caches_init+0xa9/0x11d > > [<ffffffff819c1d99>] > start_kernel+0x3de/0x426 > > [<ffffffff819c12c3>] > > x86_64_start_reservations+0xae/0xb2 > > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 SOFTIRQ-ON-W > at: > > [<ffffffff8108eadc>] > __lock_acquire+0x341/0xc07 > > [<ffffffff8108f46f>] > lock_acquire+0xcd/0xf2 > > [<ffffffff814853bc>] _spin_lock+0x36/0x6b > > [<ffffffff8110aa20>] > > __purge_vmap_area_lazy+0x54/0x18a > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > > [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 > > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 > > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 > > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 > > [<ffffffff8110c197>] map_vm_area+0x34/0x47 > > [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d > > [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 > > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 > > [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe > > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d > > [<ffffffff819c1d99>] start_kernel+0x3de/0x426 > > [<ffffffff819c12c3>] > > x86_64_start_reservations+0xae/0xb2 > > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 INITIAL USE > at: > > [<ffffffff8108eb29>] > __lock_acquire+0x38e/0xc07 > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > > [<ffffffff814853bc>] _spin_lock+0x36/0x6b > > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a > > [<ffffffff8110c82f>] > vm_unmap_aliases+0x167/0x176 > > [<ffffffff8100e58c>] > xen_alloc_ptpage+0x51/0x82 > > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 > > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > > [<ffffffff8110bf76>] > vmap_page_range_noflush+0x9a/0x264 > > [<ffffffff8110c161>] > vmap_page_range+0xe/0x10 > > [<ffffffff8110c197>] map_vm_area+0x34/0x47 > > [<ffffffff8110c2cf>] > __vmalloc_area_node+0x125/0x14d > > [<ffffffff8110c379>] > __vmalloc_node+0x82/0x91 > > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 > > [<ffffffff819dfef1>] > > alloc_large_system_hash+0x150/0x1fe > > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d > > [<ffffffff819c1d99>] start_kernel+0x3de/0x426 > > [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2 > > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 } > ... > > key at: [<ffffffff81741ef8>] purge_lock.27226+0x18/0x40 ... > > acquired at: [<ffffffff8108f20c>] __lock_acquire+0xa71/0xc07 > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] > > _spin_lock+0x36/0x6b [<ffffffff8110aa20>] > > __purge_vmap_area_lazy+0x54/0x18a [<ffffffff8110c82f>] > > vm_unmap_aliases+0x167/0x176 [<ffffffff8100d7ca>] > > xen_create_contiguous_region+0x51/0x106 [<ffffffff81250d84>] > > xen_swiotlb_alloc_coherent+0x62/0xa6 [<ffffffff8111188c>] > > dma_pool_alloc+0x136/0x2a8 [<ffffffff81370efe>] > > ehci_qh_alloc+0x44/0x107 [<ffffffff81373f5d>] > > ehci_pci_setup+0x22a/0x9c1 [<ffffffff8135b18e>] > > usb_add_hcd+0x225/0x69d [<ffffffff8136907b>] > > usb_hcd_pci_probe+0x270/0x3b1 [<ffffffff8125a8ad>] > > local_pci_probe+0x17/0x1b [<ffffffff8125b4c4>] > > pci_device_probe+0xcb/0xf7 [<ffffffff81307635>] > > driver_probe_device+0xf8/0x218 [<ffffffff813077ae>] > > __driver_attach+0x59/0x7d [<ffffffff813069e1>] > > bus_for_each_dev+0x54/0x83 [<ffffffff813073fd>] > > driver_attach+0x21/0x23 [<ffffffff81306487>] > > bus_add_driver+0xe1/0x26b [<ffffffff81307ad5>] > > driver_register+0xa3/0x11a [<ffffffff8125b71b>] > > __pci_register_driver+0x65/0xc2 [<ffffffff819f3ee0>] > > ehci_hcd_init+0x7f/0xc0 [<ffffffff8100a07e>] > > do_one_initcall+0x73/0x18b [<ffffffff819c1961>] > > kernel_init+0x172/0x1cc [<ffffffff81013eaa>] child_rip+0xa/0x20 > -> > > (&retval->lock){......} ops: 0 { INITIAL USE at: > > [<ffffffff8108eb29>] __lock_acquire+0x38e/0xc07 > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > > [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 > > [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 > > [<ffffffff81370efe>] ehci_qh_alloc+0x44/0x107 > > [<ffffffff81373f5d>] ehci_pci_setup+0x22a/0x9c1 > > [<ffffffff8135b18e>] usb_add_hcd+0x225/0x69d > > [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 > > [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b > > [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > [<ffffffff813077ae>] __driver_attach+0x59/0x7d > > [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 > > [<ffffffff813073fd>] driver_attach+0x21/0x23 > > [<ffffffff81306487>] bus_add_driver+0xe1/0x26b > > [<ffffffff81307ad5>] driver_register+0xa3/0x11a > > [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 > > [<ffffffff819f3ee0>] ehci_hcd_init+0x7f/0xc0 > > [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > [<ffffffff819c1961>] kernel_init+0x172/0x1cc > > [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key at: > > [<ffffffff824dc3c4>] __key.24188+0x0/0x1c ... acquired at: > > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 > [<ffffffff8108f128>] > > __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 [<ffffffff81485526>] > > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>] > > uhci_alloc_qh+0x33/0x146 [<ffffffff8137af66>] > > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>] > > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>] > > usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] > > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] > > usb_control_msg+0xee/0x113 [<ffffffff813551fb>] > > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] > > hub_events+0x91e/0x11a2 [<ffffffff81358432>] > hub_thread+0x25/0x199 > > [<ffffffff8107b8fd>] kthread+0x6e/0x76 [<ffffffff81013eaa>] > > child_rip+0xa/0x20 stack backtrace: Pid: 100, comm: khubd Not > tainted > > 2.6.32.9 #1 Call Trace: [<ffffffff8108cd50>] > check_usage+0x331/0x345 > > [<ffffffff81032d79>] ? pvclock_clocksource_read+0x47/0x80 > > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 > [<ffffffff8108f128>] > > __lock_acquire+0x98d/0xc07 [<ffffffff8111008c>] ? > > sys_swapoff+0x870/0x9d0 [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > > [<ffffffff8111178c>] ? dma_pool_alloc+0x36/0x2a8 > [<ffffffff81485526>] > > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] ? > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8111178c>] > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8111a986>] ? > init_object+0x73/0x7b > > [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf > > [<ffffffff8100f452>] ? check_events+0x12/0x20 [<ffffffff8137aa7b>] > > uhci_alloc_qh+0x33/0x146 [<ffffffff8111dda9>] ? > > kmem_cache_alloc+0xd9/0x150 [<ffffffff8137af66>] > > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135a29c>] ? > > dma_map_single_attrs+0xb4/0xc6 [<ffffffff8135be92>] > > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8100ed81>] ? > > xen_force_evtchn_callback+0xd/0xf [<ffffffff8100ed81>] ? > > xen_force_evtchn_callback+0xd/0xf [<ffffffff8100f452>] ? > > check_events+0x12/0x20 [<ffffffff8108b9ea>] ? > > lockdep_init_map+0x9f/0x115 [<ffffffff8135c6b2>] > > usb_submit_urb+0x297/0x2f1 [<ffffffff8107beb6>] ? > > __init_waitqueue_head+0x3a/0x4c [<ffffffff8135d51f>] > > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8100f452>] ? > > check_events+0x12/0x20 [<ffffffff8135c939>] ? > usb_alloc_urb+0x21/0x4b > > [<ffffffff8135c907>] ? usb_init_urb+0x2a/0x3b [<ffffffff8135d8a1>] > > usb_control_msg+0xee/0x113 [<ffffffff8111c5ef>] ? > > kmem_cache_alloc_notrace+0xe8/0x111 [<ffffffff8135517a>] ? > > hub_port_init+0x29c/0x7e4 [<ffffffff813551fb>] > > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] > hub_events+0x91e/0x11a2 > > [<ffffffff8135840d>] ? hub_thread+0x0/0x199 [<ffffffff81358432>] > > hub_thread+0x25/0x199 [<ffffffff8107bb4f>] ? > > autoremove_wake_function+0x0/0x3d [<ffffffff8107b8fd>] > > kthread+0x6e/0x76 [<ffffffff81013eaa>] child_rip+0xa/0x20 > > [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > > [<ffffffff81013810>] ? restore_args+0x0/0x30 [<ffffffff8107b9f2>] > ? > > kthreadd+0xed/0x10f [<ffffffff81013ea0>] ? child_rip+0x0/0x20 ata1: > > SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: > Hitachi > > HDT721025SLA380, STBOA3AA, max UDMA/133 ata1.00: 488397168 sectors, > > multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for > UDMA/133 > > scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 > > ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 > GB/232 > > GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] > > Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd > > 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > > support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI > disk > > Freeing unused kernel memory: 3396k freed Write protecting the > kernel > > read-only data: 6988k Red Hat nash version 5.1.19.6 starting > Mounting > > proc filesystem Mounting sysfs filesystem Creating /dev Creating > initial > > device nodes Setting up hotplug. usb 7-1: New USB device found, > > idVendor=0458, idProduct=0007 usb 7-1: New USB device strings: > Mfr=2, > > Product=1, SerialNumber=0 usb 7-1: Product: Optical Mouse usb 7-1: > > Manufacturer: KYE usb 7-1: configuration #1 chosen from 1 choice > input: > > KYE Optical Mouse as > > /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input3 > > generic-usb 0003:0458:0007.0001: input,hidraw0: USB HID v1.10 Mouse > [KYE > > Optical Mouse] on usb-0000:00:1d.1-1/input0 Creating block device > nodes. > > Loading aacraid.ko module Adaptec aacraid driver 1.1-5[2461]-ms > Scanning > > and configuring dmraid supported devices Scanning logical volumes > > Reading all physical volumes. This may take a while... Activating > > logical volumes Volume group "VolGroup01" not found Trying to > resume > > from /dev/VolGroup01/LogVol01 Unable to access resume device > > (/dev/VolGroup01/LogVol01) Creating root device. Mounting root > > filesystem. mount: could not find filesystem '/dev/root' Setting up > > other filesystems. Setting up new root fs setuproot: moving /dev > failed: > > No such file or directory no fstab.sys, mounting internal defaults > > setuproot: error mounting /proc: No such file or directory > setuproot: > > error mounting /sys: No such file or directory Switching to new root > and > > running init. unmounting old /dev unmounting old /proc unmounting > old > > /sys switchroot: mount failed: No such file or directory init used > > greatest stack depth: 4088 bytes left Kernel panic - not syncing: > > Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.32.9 #1 > Call > > Trace: [<ffffffff8105b73f>] panic+0xa5/0x167 [<ffffffff8100ed81>] > ? > > xen_force_evtchn_callback+0xd/0xf [<ffffffff8105f2ab>] ? > > do_exit+0x38a/0x701 [<ffffffff8100f43f>] ? > > xen_restore_fl_direct_end+0x0/0x1 [<ffffffff8108f81b>] ? > > lock_release+0x179/0x184 [<ffffffff8108ca1d>] ? > > trace_hardirqs_on+0xd/0xf [<ffffffff81484fcf>] ? > > _write_unlock_irq+0x37/0x3c [<ffffffff8105ef9f>] do_exit+0x7e/0x701 > > [<ffffffff8105f6be>] sys_exit_group+0x0/0x1b [<ffffffff8105f6d5>] > > sys_exit_group+0x17/0x1b [<ffffffff81012d72>] > > system_call_fastpath+0x16/0x1b > > > > References > > > > Visible links > > 1. mailto:pasik@iki.fi > > 2. mailto:pasik@iki.fi > > 3. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 4. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 5. mailto:pasik@iki.fi > > 6. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 7. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 8. mailto:pasik@iki.fi > > 9. mailto:pasik@iki.fi > > 10. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 11. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 12. mailto:pasik@iki.fi > > 13. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 14. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 15. mailto:pasik@iki.fi > > 16. mailto:dm-devel@redhat.com > > > [-- Attachment #1.2: Type: text/html, Size: 89135 bytes --] [-- Attachment #2: Type: text/plain, Size: 137 bytes --] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-16 22:40 ` [Xen-devel] " kishore kumar @ 2010-03-16 23:18 ` Pasi Kärkkäinen 2010-03-17 22:20 ` kishore kumar 0 siblings, 1 reply; 32+ messages in thread From: Pasi Kärkkäinen @ 2010-03-16 23:18 UTC (permalink / raw) To: kishore kumar; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore kumar wrote: > I am not sure. Can you please let me know how to check this? any command > ?? well simple "df -h" will show it. and also "cat /etc/fstab". You can also check it from your grub configuration.. from the working baremetal (non-Xen) entry. -- Pasi > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi Kärkkäinen <[1]pasik@iki.fi> wrote: > > On Tue, Mar 16, 2010 at 03:22:50PM -0700, kishore kumar wrote: > > attached is the log captured in with the word document . > > > > Scanning logical volumes > Reading all physical volumes. This may take a while... > Activating logical volumes > Volume group "VolGroup01" not found > Trying to resume from /dev/VolGroup01/LogVol01 > Unable to access resume device (/dev/VolGroup01/LogVol01) > Creating root device. > Mounting root filesystem. > mount: could not find filesystem '/dev/root' > Setting up other filesystems. > Setting up new root fs > setuproot: moving /dev failed: No such file or directory > no fstab.sys, mounting internal defaults > setuproot: error mounting /proc: No such file or directory > setuproot: error mounting /sys: No such file or directory > Switching to new root and running init. > unmounting old /dev > unmounting old /proc > unmounting old /sys > switchroot: mount failed: No such file or directory > init used greatest stack depth: 4088 bytes left > Kernel panic - not syncing: Attempted to kill init! > > So it seems it gets all the way to executing the initrd image, > which then fails to mount the root fs. > > Earlier in the log: > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA, max UDMA/133 > ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA > ata1.00: configured for UDMA/133 > scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 > ANSI: 5 > sd 0:0:0:0: Attached scsi generic sg0 type 0 > sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sda: sda1 sda2 > sd 0:0:0:0: [sda] Attached SCSI disk > > so /dev/sda was detected. Is your root lvm volume on /dev/sda ? > Is /dev/VolGroup01/LogVol01 really your root fs? > > -- Pasi > > > > > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi Kärkkäinen > <[1][2]pasik@iki.fi> wrote: > > > > On Tue, Mar 16, 2010 at 02:56:06PM -0700, kishore kumar wrote: > > > Please find the attached log file after fixing the dom 0 > kernel cmd > > line > > > as below > > > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 > earlyprintk=xen > > nomodeset > > > > > > > There's something wrong with the log, the dom0 kernel parts are > all on > > one line.. > > It's really difficult to read it. > > > > -- Pasi > > > > > Thanks > > > > > > > > > On Tue, Mar 16, 2010 at 2:29 PM, Pasi Kärkkäinen > > <[1][2][3]pasik@iki.fi> wrote: > > > > > > On Tue, Mar 16, 2010 at 02:16:22PM -0700, kishore kumar > wrote: > > > > I did below steps. > > > > > > > > > > > > I pulled DOM 0 kernel from > > > > git clone > > > > > > git://[1][2][3][4]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > linux-2.6-xen > > > > > > > > cd linux-2.6-xen > > > > > > > > make clean > > > > > > > > cp -a .config .config-old > > > > > > > > wget -O .config > > > > > > > > > > [2][3][4][5]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > make oldconfig > > > > > > > > make bzImage > > > > > > > > make modules > > > > > > > > make modules_install > > > > > > > > cp -a .config /boot/config-2.6.32.9 > > > > > > > > cp -a System.map /boot/System.map-2.6.32.9 > > > > > > > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.9 > > > > > > > > and modified the grub.conf as below > > > > > > > > > > > > Root(hd0,0) > > > > > > > > kernel /xen.gz console=vga,com1 com1=115200,8n1 > msi=1 > > iommu=1 > > > > > > > > module /vmlinuz-2.6.32.9 ro > root=/dev/VolGroup01/LogVo100 > > rhgb > > > quiet > > > > > > > > module /initrd-2.6.32.9.img > > > > > > > > > > > > and rebooted the machine. Then It booted with some > xen > > messages > > > and > > > > stopped. Those were the messages captured from > serial > > console. > > > > > > > > Please let me know if I did something wrong here. > > > > > > > > > > Please fix the kernel cmdline based on my earlier email, > and > > capture and > > > post the > > > serial console log again! > > > > > > -- Pasi > > > > > > > > > > > > On Tue, Mar 16, 2010 at 1:20 PM, Pasi Kärkkäinen > > > <[3][4][5][6]pasik@iki.fi> wrote: > > > > > > > > On Tue, Mar 16, 2010 at 01:16:28PM -0700, Jeremy > > Fitzhardinge > > > wrote: > > > > > On 03/16/2010 12:48 PM, Pasi Kärkkäinen wrote: > > > > >> On Tue, Mar 16, 2010 at 09:43:44PM +0200, Pasi > > Kärkkäinen > > > wrote: > > > > >> > > > > >>> On Tue, Mar 16, 2010 at 10:32:17AM -0700, > kishore > > kumar > > > wrote: > > > > >>> > > > > >>>> Attached is the output captured from > serial > > console. > > > > >>>> > > > > >>>> Machine does not boot after compiling xen > 3.4.3 > > with > > > pv_ops dom > > > > 0 kernel. > > > > >>>> > > > > >>>> Please let me know what is going wrong > here. > > > > >>>> > > > > >>>> > > > > >>> Ok this looks like a bug that is already being > sorted > > out on > > > > xen-devel mailinglist. > > > > >>> I added CC to xen-devel. > > > > >>> > > > > >>> > > > > >> > > > > > > > > > > Those messages are not a problem in themselves, > but the > > related > > > > problem > > > > > is believed to be fixed in current > xen/stable-2.6.32.x. > > It > > > looks like > > > > > the output stops there because the Xen console > isn't set > > up > > > properly > > > > for > > > > > some reason. > > > > > > > > > > > > > Yeah, remove "rhgb quiet" from the options.. the > dom0 > > kernel > > > cmdline > > > > should be like this: > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 > > earlyprintk=xen > > > nomodeset > > > > -- Pasi > > > > > > > > References > > > > > > > > Visible links > > > > 1. > > > [5][6][7]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > 2. > > > > > > [6][7][8]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > 3. mailto:[7][8][9]pasik@iki.fi > > > > > > References > > > > > > Visible links > > > 1. mailto:[9][10]pasik@iki.fi > > > 2. > > > [10][11]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 3. > > > [11][12]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 4. mailto:[12][13]pasik@iki.fi > > > 5. > > > [13][14]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 6. > > > [14][15]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 7. mailto:[15][16]pasik@iki.fi > > > Asserting Post complete GPIO!!! > > > Transfer control to CSM 16-bit binary for legacy boot > > > __ __ _____ _ _ _____ _ _ > > > \ \/ /___ _ __ |___ /| || | |___ / _ __ ___| || | _ > __ _ > > __ ___ > > > \ // _ \ '_ \ |_ \| || |_ |_ \ __| '__/ __| || |_ __| > '_ \| > > '__/ _ \ > > > / \ __/ | | | ___) |__ _| ___) |__| | | (__|__ _|__| > |_) | | > > | __/ > > > /_/\_\___|_| |_| |____(_) |_|(_)____/ |_| \___| |_| | > .__/|_| > > \___| > > > |_| > > > (XEN) Xen version 3.4.3-rc4-pre (kishore@localdomain) (gcc > version > > 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar 15 13:44:31 PDT 2010 > > > (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 2010 +0000 > > 19924:6e72f8c3c017 > > > (XEN) Command line: console=vga,com1 com1=115200,8n1 msi=1 > iommu=1 > > > (XEN) Video information: > > > (XEN) VGA is text mode 80x25, font 8x16 > > > (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds > > > (XEN) EDID info not retrieved because no DDC retrieval method > > detected > > > (XEN) Disc information: > > > (XEN) Found 1 MBR signatures > > > (XEN) Found 1 EDD information structures > > > (XEN) Xen-e820 RAM map: > > > (XEN) 0000000000000000 - 000000000009d000 (usable) > > > (XEN) 000000000009d000 - 00000000000a0000 (reserved) > > > (XEN) 00000000000e0000 - 0000000000100000 (reserved) > > > (XEN) 0000000000100000 - 000000006d597000 (usable) > > > (XEN) 000000006d597000 - 000000006d686000 (reserved) > > > (XEN) 000000006d686000 - 000000006f598000 (usable) > > > (XEN) 000000006f598000 - 000000006f59a000 (reserved) > > > (XEN) 000000006f59a000 - 000000006f5af000 (ACPI NVS) > > > (XEN) 000000006f5af000 - 000000006f5d9000 (reserved) > > > (XEN) 000000006f5d9000 - 000000006f5f9000 (ACPI data) > > > (XEN) 000000006f5f9000 - 000000006f6df000 (ACPI NVS) > > > (XEN) 000000006f6df000 - 000000006f700000 (ACPI data) > > > (XEN) 000000006f700000 - 0000000080000000 (reserved) > > > (XEN) 00000000a0000000 - 00000000b0000000 (reserved) > > > (XEN) 00000000fc000000 - 00000000fd000000 (reserved) > > > (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) > > > (XEN) 00000000ffc00000 - 0000000100000000 (reserved) > > > (XEN) System RAM: 1780MB (1823000kB) > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL ) > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL THRLY 0 > > 1000013) > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL THRLY 0 > MSFT > > 100000D) > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL THRLY 3 > MSFT > > 100000D) > > > (XEN) ACPI: FACS 6F5F9000, 0040 > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL THRLY 0 > MSFT > > 100000D) > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL THRLY 1 > MSFT > > 100000D) > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL THRLY 1 > MSFT > > 100000D) > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL THRLY 1 > MSFT > > 100000D) > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL THRLY 0 > MSFT > > 100000D) > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 INTEL SSDT PM 4000 > INTL > > 20061109) > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL THRLY 1 > MSFT > > 100000D) > > > (XEN) Domain heap initialised > > > (XEN) Processor #0 6:12 APIC version 21 > > > (XEN) Processor #2 6:12 APIC version 21 > > > (XEN) Processor #4 6:12 APIC version 21 > > > (XEN) Processor #16 6:12 APIC version 21 > > > (XEN) Processor #18 6:12 APIC version 21 > > > (XEN) Processor #20 6:12 APIC version 21 > > > (XEN) Processor #1 6:12 APIC version 21 > > > (XEN) Processor #3 6:12 APIC version 21 > > > (XEN) Processor #5 6:12 APIC version 21 > > > (XEN) Processor #17 6:12 APIC version 21 > > > (XEN) Processor #19 6:12 APIC version 21 > > > (XEN) Processor #21 6:12 APIC version 21 > > > (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI > 0-23 > > > (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec90000, GSI > 24-47 > > > (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs > > > (XEN) Intel VT-d DMAR tables have been parsed. > > > (XEN) Using scheduler: SMP Credit Scheduler (credit) > > > (XEN) Detected 3200.207 MHz processor. > > > (XEN) VMX: Supported advanced features: > > > (XEN) - APIC MMIO access virtualisation > > > (XEN) - APIC TPR shadow > > > (XEN) - Extended Page Tables (EPT) > > > (XEN) - Virtual-Processor Identifiers (VPID) > > > (XEN) - Virtual NMI > > > (XEN) - MSR direct-access bitmap > > > (XEN) VMX: EPT is available. > > > (XEN) VMX: VPID is available. > > > (XEN) HVM: VMX enabled > > > (XEN) HVM: Hardware Assisted Paging detected. > > > (XEN) CPU0: Intel Genuine Intel(R) CPU 000 @ > 3.20GHz > > stepping 00 > > > (XEN) Booting processor 1/2 eip 88000 > > > (XEN) CPU1: Intel Genuine Intel(R) CPU 000 @ > 3.20GHz > > stepping 00 > > > (XEN) Booting processor 2/4 eip 88000 > > > (XEN) CPU2: Intel Genuine Intel(R) CPU 000 @ > 3.20GHz > > stepping 00 > > > (XEN) Booting processor 3/16 eip 88000 > > > (XEN) CPU3: Intel Genuine Intel(R) CPU 000 @ > 3.20GHz > > stepping 00 > > > (XEN) Booting processor 4/18 eip 88000 > > > (XEN) CPU4: Intel Genuine Intel(R) CPU 000 @ > 3.20GHz > > stepping 00 > > > (XEN) Booting processor 5/20 eip 88000 > > > (XEN) CPU5: Intel Genuine Intel(R) CPU 000 @ > 3.20GHz > > stepping 00 > > > (XEN) Booting processor 6/1 eip 88000 > > > (XEN) CPU6: Intel Genuine Intel(R) CPU 000 @ > 3.20GHz > > stepping 00 > > > (XEN) Booting processor 7/3 eip 88000 > > > (XEN) CPU7: Intel Genuine Intel(R) CPU 000 @ > 3.20GHz > > stepping 00 > > > (XEN) Booting processor 8/5 eip 88000 > > > (XEN) CPU8: Intel Genuine Intel(R) CPU 000 @ > 3.20GHz > > stepping 00 > > > (XEN) Booting processor 9/17 eip 88000 > > > (XEN) CPU9: Intel Genuine Intel(R) CPU 000 @ > 3.20GHz > > stepping 00 > > > (XEN) Booting processor 10/19 eip 88000 > > > (XEN) CPU10: Intel Genuine Intel(R) CPU 000 @ > 3.20GHz > > stepping 00 > > > (XEN) Booting processor 11/21 eip 88000 > > > (XEN) CPU11: Intel Genuine Intel(R) CPU 000 @ > 3.20GHz > > stepping 00 > > > (XEN) Total of 12 processors activated. > > > (XEN) ENABLING IO-APIC IRQs > > > (XEN) -> Using new ACK method > > > (XEN) checking TSC synchronization across 12 CPUs: passed. > > > (XEN) Platform timer is 14.318MHz HPET > > > ?(XEN) Brought up 12 CPUs > > > (XEN) Intel VT-d Snoop Control supported. > > > (XEN) Intel VT-d DMA Passthrough not supported. > > > (XEN) Intel VT-d Queued Invalidation supported. > > > (XEN) Intel VT-d Interrupt Remapping supported. > > > (XEN) I/O virtualisation enabled > > > (XEN) I/O virtualisation for PV guests disabled > > > (XEN) xenoprof: Initialization failed. Intel processor model 44 > for P6 > > class family is not supported > > > (XEN) *** LOADING DOMAIN 0 *** > > > (XEN) Xen kernel: 64-bit, lsb, compat32 > > > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> > 0x26bb000 > > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > > (XEN) Dom0 alloc.: 0000000064000000->0000000068000000 > (404490 pages > > to be allocated) > > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > > (XEN) Loaded kernel: ffffffff81000000->ffffffff826bb000 > > > (XEN) Init. ramdisk: ffffffff826bb000->ffffffff82d0d800 > > > (XEN) Phys-Mach map: ffffffff82d0e000->ffffffff83044050 > > > (XEN) Start info: ffffffff83045000->ffffffff830454b4 > > > (XEN) Page tables: ffffffff83046000->ffffffff83063000 > > > (XEN) Boot stack: ffffffff83063000->ffffffff83064000 > > > (XEN) TOTAL: ffffffff80000000->ffffffff83400000 > > > (XEN) ENTRY ADDRESS: ffffffff819c1200 > > > (XEN) Dom0 has maximum 12 VCPUs > > > (XEN) Scrubbing Free RAM: .done. > > > (XEN) Xen trace buffers: disabled > > > (XEN) Std. Loglevel: Errors and warnings > > > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and > warnings) > > > (XEN) Xen is relinquishing VGA console. > > > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to > switch > > input to Xen) > > > (XEN) Freed 128kB init memory. > > > mapping kernel into physical memory > > > Xen: setup ISA identity maps > > > about to get started... > > > Initializing cgroup subsys cpuset > > > Initializing cgroup subsys cpu > > > Linux version 2.6.32.9 (kishore@localhost.localdomain) (gcc > version > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 15 15:16:28 PDT > 2010 > > > Command line: ro root=/dev/VolGroup01/LogVol00 console=hvc0 > > earlyprintk=xen nomodeset > > > KERNEL supported cpus: > > > Intel GenuineIntel > > > AMD AuthenticAMD > > > Centaur CentaurHauls > > > BIOS-provided physical RAM map: > > > Xen: 0000000000000000 - 000000000009d000 (usable) > > > Xen: 000000000009d000 - 0000000000100000 (reserved) > > > Xen: 0000000000100000 - 0000000066c0a000 (usable) > > > Xen: 000000006d597000 - 000000006d686000 (reserved) > > > Xen: 000000006f598000 - 000000006f59a000 (reserved) > > > Xen: 000000006f59a000 - 000000006f5af000 (ACPI NVS) > > > Xen: 000000006f5af000 - 000000006f5d9000 (reserved) > > > Xen: 000000006f5d9000 - 000000006f5f9000 (ACPI data) > > > Xen: 000000006f5f9000 - 000000006f6df000 (ACPI NVS) > > > Xen: 000000006f6df000 - 000000006f700000 (ACPI data) > > > Xen: 000000006f700000 - 0000000080000000 (reserved) > > > Xen: 00000000a0000000 - 00000000b0000000 (reserved) > > > Xen: 00000000fc000000 - 00000000fd000000 (reserved) > > > Xen: 00000000fed1c000 - 00000000fed20000 (reserved) > > > Xen: 00000000ffc00000 - 0000000100000000 (reserved) > > > bootconsole [xenboot0] enabled > > > DMI 2.4 present. > > > last_pfn = 0x66c0a max_arch_pfn = 0x400000000 > > > init_memory_mapping: 0000000000000000-0000000066c0a000 > > > RAMDISK: 026bb000 - 02d0d800 > > > ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL ) > > > ACPI: XSDT 000000006f6fe120 00064 (v01 INTEL THRLY 00000000 > > 01000013) > > > ACPI: FACP 000000006f6fd000 000F4 (v04 INTEL THRLY 00000000 > MSFT > > 0100000D) > > > ACPI: DSDT 000000006f6f5000 074F1 (v02 INTEL THRLY 00000003 > MSFT > > 0100000D) > > > ACPI: FACS 000000006f5f9000 00040 > > > ACPI: APIC 000000006f6f4000 001CC (v02 INTEL THRLY 00000000 > MSFT > > 0100000D) > > > ACPI: MCFG 000000006f6f3000 0003C (v01 INTEL THRLY 00000001 > MSFT > > 0100000D) > > > ACPI: HPET 000000006f6f2000 00038 (v01 INTEL THRLY 00000001 > MSFT > > 0100000D) > > > ACPI: SLIT 000000006f6f1000 00030 (v01 INTEL THRLY 00000001 > MSFT > > 0100000D) > > > ACPI: WDDT 000000006f6f0000 00040 (v01 INTEL THRLY 00000000 > MSFT > > 0100000D) > > > ACPI: SSDT 000000006f5d9000 1FDDC (v01 INTEL SSDT PM 00004000 > INTL > > 20061109) > > > ACPI: 000000006f6ee000 001D0 (v01 INTEL THRLY 00000001 > MSFT > > 0100000D) > > > No NUMA configuration found > > > Faking a node at 0000000000000000-0000000066c0a000 > > > Bootmem setup node 0 0000000000000000-0000000066c0a000 > > > NODE_DATA [0000000000008000 - 000000000001ffff] > > > bootmap [0000000000020000 - 000000000002cd87] pages d > > > (9 early reservations) ==> bootmem [0000000000 - 0066c0a000] > > > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 > - > > 0000001000] > > > #1 [0003046000 - 0003063000] XEN PAGETABLES ==> [0003046000 > - > > 0003063000] > > > #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 > - > > 0000008000] > > > #3 [0001000000 - 000269ae98] TEXT DATA BSS ==> [0001000000 > - > > 000269ae98] > > > #4 [00026bb000 - 0002d0d800] RAMDISK ==> [00026bb000 > - > > 0002d0d800] > > > #5 [0002d0e000 - 0003046000] XEN START INFO ==> [0002d0e000 > - > > 0003046000] > > > #6 [000269b000 - 000269b011] BRK ==> [000269b000 > - > > 000269b011] > > > #7 [0000100000 - 000041a000] PGTABLE ==> [0000100000 > - > > 000041a000] > > > #8 [0000001000 - 0000001030] ACPI SLIT ==> [0000001000 > - > > 0000001030] > > > found SMP MP-table at [ffff8800000fd750] fd750 > > > Zone PFN ranges: > > > DMA 0x00000000 -> 0x00001000 > > > DMA32 0x00001000 -> 0x00100000 > > > Normal 0x00100000 -> 0x00100000 > > > Movable zone start PFN for each node > > > early_node_map[2] active PFN ranges > > > 0: 0x00000000 -> 0x0000009d > > > 0: 0x00000100 -> 0x00066c0a > > > ACPI: PM-Timer IO Port: 0x408 > > > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) > > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) > > > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled) > > > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled) > > > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) > > > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] enabled) > > > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) > > > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] enabled) > > > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled) > > > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled) > > > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled) > > > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) > > > ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) > > > ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1]) > > > ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1]) > > > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > > > IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 > > > ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24]) > > > IOAPIC[1]: apic_id 9, version 0, address 0xfec90000, GSI 24-24 > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > > ERROR: Unable to locate IOAPIC for GSI 2 > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > > > ERROR: Unable to locate IOAPIC for GSI 9 > > > Using ACPI (MADT) for SMP configuration information > > > ACPI: HPET id: 0x8086a401 base: 0xfed00000 > > > SMP: Allowing 12 CPUs, 0 hotplug CPUs > > > PM: Registered nosave memory: 000000000009d000 - > 0000000000100000 > > > Allocating PCI resources starting at b0000000 (gap: > b0000000:4c000000) > > > Booting paravirtualized kernel on Xen > > > Xen version: 3.4.3-rc4-pre (preserve-AD) (dom0) > > > NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1 > > > PERCPU: Embedded 478 pages/cpu @ffff880005ebc000 s1928024 r8192 > d21672 > > u1957888 > > > pcpu-alloc: s1928024 r8192 d21672 u1957888 alloc=478*4096 > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 > [0] 07 > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 > > > Xen: using vcpu_info placement > > > Built 1 zonelists in Node order, mobility grouping on. Total > pages: > > 409291 > > > Policy zone: DMA32 > > > Kernel command line: ro root=/dev/VolGroup01/LogVol00 > console=hvc0 > > earlyprintk=xen nomodeset > > > PID hash table entries: 4096 (order: 3, 32768 bytes) > > > Initializing CPU#0 > > > DMA: Placing 64MB software IO TLB between ffff880007525000 - > > ffff88000b525000 > > > DMA: software IO TLB at phys 0x7525000 - 0xb525000 > > > xen_swiotlb_fixup: buf=ffff880007525000 size=67108864 > > > xen_swiotlb_fixup: buf=ffff88000b585000 size=32768 > > > Memory: 1514268k/1683496k available (4654k kernel code, 396k > absent, > > 168832k reserved, 3443k data, 3396k init) > > > SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, > CPUs=12, > > Nodes=1 > > > Hierarchical RCU implementation. > > > NR_IRQS:4352 nr_irqs:3072 > > > Already setup the GSI :0 > > > Already setup the GSI :1 > > > Already setup the GSI :2 > > > Already setup the GSI :3 > > > Already setup the GSI :4 > > > Already setup the GSI :5 > > > Already setup the GSI :6 > > > Already setup the GSI :7 > > > Already setup the GSI :8 > > > Already setup the GSI :9 > > > Already setup the GSI :10 > > > Already setup the GSI :11 > > > Already setup the GSI :12 > > > Already setup the GSI :13 > > > Already setup the GSI :14 > > > Already setup the GSI :15 > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > > > xen: sci override: source_irq=9 global_irq=9 trigger=c > polarity=1 > > > xen_allocate_pirq: returning irq 9 for gsi 9 > > > Already setup the GSI :9 > > > xen: acpi sci 9 > > > Console: colour VGA+ 80x25 > > > console [hvc0] enabled, bootconsole disabled console [hvc0] > enabled, > > bootconsole disabled > > > Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., > Ingo > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: > 48 > > ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: > 4096 ... > > MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 > ... > > CHAINHASH_SIZE: 16384 memory used by lock dependency > info: > > 6367 kB per task-struct memory footprint: 2688 bytes allocated > 17039360 > > bytes of page_cgroup please try 'cgroup_disable=memory' option if > you > > don't want memory cgroups installing Xen timer for CPU 0 Detected > > 3200.206 MHz processor. Calibrating delay loop (skipped), value > > calculated using timer frequency.. 6400.41 BogoMIPS (lpj=3200206) > > Security Framework initialized SELinux: Initializing. Dentry > cache hash > > table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash > table > > entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table > > entries: 256 Initializing cgroup subsys ns Initializing cgroup > subsys > > cpuacct Initializing cgroup subsys memory Initializing cgroup > subsys > > devices Initializing cgroup subsys freezer Initializing cgroup > subsys > > net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K > CPU: > > L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU: Unsupported number of > siblings > > 32 Performance Events: unsupported p6 CPU model 44 no PMU driver, > > software events only. lockdep: fixing up alternatives. SMP > alternatives: > > switching to UP code ACPI: Core revision 20090903 ftrace: > converting > > mcount calls to 0f 1f 44 00 00 ftrace: allocating 27971 entries > in 110 > > pages installing Xen timer for CPU 1 lockdep: fixing up > alternatives. > > SMP alternatives: switching to SMP code Initializing CPU#1 CPU: > L1 I > > cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: > 12288K > > CPU 1/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > installing > > Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I cache: 32K, L1 D > cache: > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 2/0x0 -> Node 0 > CPU: > > Unsupported number of siblings 32 installing Xen timer for CPU 3 > > Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 > cache: > > 256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node 0 CPU: Unsupported > number > > of siblings 32 installing Xen timer for CPU 4 Initializing CPU#4 > CPU: L1 > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: > 12288K > > CPU 4/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > installing > > Xen timer for CPU 5 Initializing CPU#5 CPU: L1 I cache: 32K, L1 D > cache: > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 5/0x0 -> Node 0 > CPU: > > Unsupported number of siblings 32 installing Xen timer for CPU 6 > > Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 > cache: > > 256K CPU: L3 cache: 12288K CPU 6/0x0 -> Node 0 CPU: Unsupported > number > > of siblings 32 installing Xen timer for CPU 7 Initializing CPU#7 > CPU: L1 > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: > 12288K > > CPU 7/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > installing > > Xen timer for CPU 8 Initializing CPU#8 CPU: L1 I cache: 32K, L1 D > cache: > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 8/0x0 -> Node 0 > CPU: > > Unsupported number of siblings 32 installing Xen timer for CPU 9 > > Initializing CPU#9 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 > cache: > > 256K CPU: L3 cache: 12288K CPU 9/0x0 -> Node 0 CPU: Unsupported > number > > of siblings 32 installing Xen timer for CPU 10 Initializing > CPU#10 CPU: > > L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 > cache: > > 12288K CPU 10/0x0 -> Node 0 CPU: Unsupported number of siblings > 32 > > installing Xen timer for CPU 11 Initializing CPU#11 CPU: L1 I > cache: > > 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K > CPU > > 11/0x0 -> Node 0 CPU: Unsupported number of siblings 32 Brought > up 12 > > CPUs Grant table initialized regulator: core version 0.5 Time: > 14:45:00 > > Date: 03/16/10 NET: Registered protocol family 16 > xenbus_probe_init ok > > ACPI FADT declares the system doesn't support PCIe ASPM, so > disable it > > ACPI: bus type pci registered PCI: MCFG configuration 0: base > a0000000 > > segment 0 buses 0 - 255 PCI: MCFG area at a0000000 reserved in > E820 PCI: > > Using MMCONFIG at a0000000 - afffffff PCI: Using configuration > type 1 > > for base access bio: create slab <bio-0> at 0 ACPI Error: Field > [CPB3] > > at 96 exceeds Buffer [NULL] size 64 (bits) > (20090903/dsopcode-596) ACPI > > Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] > (Node > > ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI: Interpreter enabled > ACPI: > > (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt > routing ACPI > > Warning: Incorrect checksum in table [ ] - 97, should be DB > > (20090903/tbutils-314) ACPI: No dock devices found. ACPI: PCI > Root > > Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 > D3hot > > D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: PME# > supported > > from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci > 0000:00:03.0: > > PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# > disabled pci > > 0000:00:04.0: PME# supported from D0 D3hot D3cold pci > 0000:00:04.0: PME# > > disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold > pci > > 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported from > D0 > > D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: > PME# > > supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled > pci > > 0000:00:08.0: PME# supported from D0 D3hot D3cold pci > 0000:00:08.0: PME# > > disabled pci 0000:00:09.0: PME# supported from D0 D3hot D3cold > pci > > 0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME# supported from > D0 > > D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:13.0: > PME# > > supported from D0 D3hot D3cold pci 0000:00:13.0: PME# disabled > pci > > 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci > 0000:00:1a.7: PME# > > disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > pci > > 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from > D0 > > D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: > PME# > > supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled > pci > > 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci > 0000:00:1d.7: PME# > > disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by > ICH6 > > ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed > by ICH6 > > GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 > (mask > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 > (mask > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0600 > (mask > > 001f) pci 0000:00:1f.2: PME# supported from D3hot pci > 0000:00:1f.2: PME# > > disabled pci 0000:01:00.0: PME# supported from D0 D3hot D3cold > pci > > 0000:01:00.0: PME# disabled pci 0000:01:00.1: PME# supported from > D0 > > D3hot D3cold pci 0000:01:00.1: PME# disabled pci 0000:0c:00.0: > disabling > > ASPM on pre-1.1 PCIe device. You can enable it with > 'pcie_aspm=force' > > pci 0000:00:1e.0: transparent bridge ACPI: PCI Root Bridge [PCI1] > > (0000:fe) ACPI: PCI Root Bridge [PCI2] (0000:ff) ACPI: PCI > Interrupt > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI > Interrupt Link > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt > Link > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt > Link > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt > Link > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: > PCI > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, > disabled. > > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 > 15) > > xenbus_probe_backend_init bus registered ok > xenbus_probe_frontend_init > > bus registered ok xen_balloon: Initialising balloon driver with > page > > order 0. vgaarb: device added: > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: > loaded > > SCSI subsystem initialized usbcore: registered new interface > driver > > usbfs usbcore: registered new interface driver hub usbcore: > registered > > new device driver usb PCI: Using ACPI for IRQ routing NetLabel: > > Initializing NetLabel: domain hash size = 128 NetLabel: > protocols = > > UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default > > Switching to clocksource xen kstop/0 used greatest stack depth: > 6568 > > bytes left kstop/1 used greatest stack depth: 6536 bytes left > pnp: PnP > > ACPI init ACPI: bus type pnp registered xen_allocate_pirq: > returning irq > > 8 for gsi 8 Already setup the GSI :8 xen_allocate_pirq: returning > irq 13 > > for gsi 13 Already setup the GSI :13 pnp: PnP ACPI: found 13 > devices > > ACPI: ACPI bus type pnp unregistered system 00:07: ioport range > > 0x500-0x53f has been reserved system 00:07: ioport range > 0x400-0x47f has > > been reserved system 00:07: ioport range 0x800-0x81f has been > reserved > > system 00:07: ioport range 0x2f8-0x2ff has been reserved system > 00:07: > > iomem range 0xfed1c000-0xfed8bffe could not be reserved system > 00:07: > > iomem range 0xff000000-0xffffffff could not be reserved system > 00:07: > > iomem range 0xfee00000-0xfeefffff has been reserved system 00:07: > iomem > > range 0xfe900000-0xfe90001f has been reserved system 00:07: iomem > range > > 0xfea00000-0xfea0001f has been reserved system 00:07: iomem range > > 0xfed1b000-0xfed1bfff has been reserved pci 0000:0c:00.0: BAR 6: > no > > parent found for of device [0xffff0000-0xffffffff] pci > 0000:00:01.0: PCI > > bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: > > 0x1000-0x1fff pci 0000:00:01.0: MEM window: > 0xb1900000-0xb19fffff pci > > 0000:00:01.0: PREFETCH window: disabled pci 0000:00:02.0: PCI > bridge, > > secondary bus 0000:02 pci 0000:00:02.0: IO window: disabled pci > > 0000:00:02.0: MEM window: disabled pci 0000:00:02.0: PREFETCH > > window: disabled pci 0000:00:03.0: PCI bridge, secondary bus > 0000:03 pci > > 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM > window: > > disabled pci 0000:00:03.0: PREFETCH window: disabled pci > 0000:00:04.0: > > PCI bridge, secondary bus 0000:04 pci 0000:00:04.0: IO window: > > disabled pci 0000:00:04.0: MEM window: disabled pci > 0000:00:04.0: > > PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, secondary > bus > > 0000:05 pci 0000:00:05.0: IO window: disabled pci 0000:00:05.0: > MEM > > window: disabled pci 0000:00:05.0: PREFETCH window: disabled > pci > > 0000:00:06.0: PCI bridge, secondary bus 0000:06 pci 0000:00:06.0: > IO > > window: disabled pci 0000:00:06.0: MEM window: disabled pci > > 0000:00:06.0: PREFETCH window: disabled pci 0000:00:07.0: PCI > bridge, > > secondary bus 0000:07 pci 0000:00:07.0: IO window: disabled pci > > 0000:00:07.0: MEM window: disabled pci 0000:00:07.0: PREFETCH > > window: disabled pci 0000:00:08.0: PCI bridge, secondary bus > 0000:08 pci > > 0000:00:08.0: IO window: disabled pci 0000:00:08.0: MEM > window: > > disabled pci 0000:00:08.0: PREFETCH window: disabled pci > 0000:00:09.0: > > PCI bridge, secondary bus 0000:09 pci 0000:00:09.0: IO window: > > 0x3000-0x3fff pci 0000:00:09.0: MEM window: > 0xb1b00000-0xb1cfffff pci > > 0000:00:09.0: PREFETCH window: > 0x000000b1d00000-0x000000b1efffff pci > > 0000:00:0a.0: PCI bridge, secondary bus 0000:0a pci 0000:00:0a.0: > IO > > window: disabled pci 0000:00:0a.0: MEM window: disabled pci > > 0000:00:0a.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI > bridge, > > secondary bus 0000:0b pci 0000:00:1c.0: IO window: disabled pci > > 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH > > window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus > 0000:0c pci > > 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM > window: > > 0xb1000000-0xb18fffff pci 0000:00:1c.4: PREFETCH window: > > 0x000000b0000000-0x000000b0ffffff pci 0000:00:1c.5: PCI bridge, > > secondary bus 0000:0d pci 0000:00:1c.5: IO window: disabled pci > > 0000:00:1c.5: MEM window: disabled pci 0000:00:1c.5: PREFETCH > > window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus > 0000:0e pci > > 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM > window: > > disabled pci 0000:00:1e.0: PREFETCH window: disabled pci > 0000:00:01.0: > > PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci 0000:00:02.0: PCI > INT A > > -> GSI 29 (level, low) -> IRQ 29 pci 0000:00:03.0: PCI INT A -> > GSI 24 > > (level, low) -> IRQ 24 pci 0000:00:04.0: PCI INT A -> GSI 25 > (level, > > low) -> IRQ 25 pci 0000:00:05.0: PCI INT A -> GSI 26 (level, low) > -> IRQ > > 26 pci 0000:00:06.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27 > pci > > 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 pci > > 0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 pci > > 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci > > 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 pci > > 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > xen_allocate_pirq: returning irq 16 for gsi 16 Already setup the > GSI :16 > > pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci > > 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 NET: > Registered > > protocol family 2 IP route cache hash table entries: 65536 > (order: 7, > > 524288 bytes) TCP established hash table entries: 262144 (order: > 10, > > 4194304 bytes) TCP bind hash table entries: 65536 (order: 10, > 4718592 > > bytes) TCP: Hash tables configured (established 262144 bind > 65536) TCP > > reno registered NET: Registered protocol family 1 pci > 0000:01:00.0: > > Disabling L0s pci 0000:01:00.1: Disabling L0s Trying to unpack > rootfs > > image as initramfs... Freeing initrd memory: 6474k freed DMA-API: > > preallocated 32768 debug entries DMA-API: debugging enabled by > kernel > > config PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > DMA: > > Placing 64MB software IO TLB between ffff880007525000 - > ffff88000b525000 > > DMA: software IO TLB at phys 0x7525000 - 0xb525000 audit: > initializing > > netlink socket (disabled) type=2000 audit(1268750702.035:1): > initialized > > HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: > Disk > > quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, > 4096 > > bytes) msgmni has been set to 2970 cryptomgr_test used greatest > stack > > depth: 5864 bytes left cryptomgr_test used greatest stack depth: > 5816 > > bytes left alg: No test for stdrng (krng) Block layer SCSI > generic (bsg) > > driver version 0.4 loaded (major 252) io scheduler noop > registered io > > scheduler anticipatory registered io scheduler deadline > registered io > > scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI > Core > > version: 0.5 pciehp 0000:00:09.0:pcie04: HPC vendor_id 8086 > device_id > > 3410 ss_vid 0 ss_did 0 pciehp: PCI Express Hot Plug Controller > Driver > > version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver > version: 0.5 > > acpiphp_glue: Slot 2 already registered by another hotplug driver > > acpiphp_glue: Slot 2 already registered by another hotplug driver > > acpiphp_glue: Slot 2 already registered by another hotplug driver > > acpiphp_glue: Slot 2 already registered by another hotplug driver > > acpiphp_glue: Slot 2 already registered by another hotplug driver > > acpiphp_glue: Slot 2 already registered by another hotplug driver > > acpiphp_glue: Slot 2 already registered by another hotplug driver > > acpiphp_glue: Slot 2 already registered by another hotplug driver > > pci-stub: invalid id string "" input: Sleep Button as > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 ACPI: > Sleep > > Button [SLPB] input: Power Button as > > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button > [PWRF] > > registering netback hpet_acpi_add: no address or irqs in _CRS > > Non-volatile memory driver v1.3 Linux agpgart interface v0.103 > Serial: > > 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS1 > at I/O > > 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module > loaded > > input: Macintosh mouse button emulation as > /devices/virtual/input/input2 > > ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > ahci > > 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl > SATA mode > > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part > ccc > > ems scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : > ahci > > scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, > connection > > status changed irq 2996 ata2: SATA max UDMA/133 abar > m2048@0xb1a00000 > > port 0xb1a00180 irq 2996 ata3: SATA max UDMA/133 abar > m2048@0xb1a00000 > > port 0xb1a00200 irq 2996 ata4: SATA max UDMA/133 abar > m2048@0xb1a00000 > > port 0xb1a00280 irq 2996 ata5: SATA max UDMA/133 abar > m2048@0xb1a00000 > > port 0xb1a00300 irq 2996 ata6: SATA max UDMA/133 abar > m2048@0xb1a00000 > > port 0xb1a00380 irq 2996 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 > > 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: > PCI INT > > C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: EHCI > Host > > Controller ehci_hcd 0000:00:1a.7: new USB bus registered, > assigned bus > > number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd > 0000:00:1a.7: irq > > 18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7: USB 2.0 started, > EHCI 1.00 > > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb > usb1: > > New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb > usb1: > > Product: EHCI Host Controller usb usb1: Manufacturer: Linux > 2.6.32.9 > > ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: > configuration #1 > > chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 > ports > > detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) > -> IRQ > > 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd > 0000:00:1d.7: > > new USB bus registered, assigned bus number 2 ehci_hcd > 0000:00:1d.7: > > debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb1a01000 > ehci_hcd > > 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device > found, > > idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: > Mfr=3, > > Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller > usb > > usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd usb usb2: > SerialNumber: > > 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: > USB 1.1 > > 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host > > Controller Interface driver xen_allocate_pirq: returning irq 16 > for gsi > > 16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0: PCI INT A -> > GSI 16 > > (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: UHCI Host > Controller > > uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus > number 3 > > uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020e0 usb usb3: New > USB > > device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB > device > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI > Host > > Controller usb usb3: Manufacturer: Linux 2.6.32.9 uhci_hcd usb > usb3: > > SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from > 1 > > choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected > uhci_hcd > > 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd > > 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB > bus > > registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, > io base > > 0x000020c0 usb usb4: New USB device found, idVendor=1d6b, > idProduct=0001 > > usb usb4: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 usb > > usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux > > 2.6.32.9 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: > > configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found > hub > > 4-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 19 for > gsi 19 > > Already setup the GSI :19 uhci_hcd 0000:00:1a.2: PCI INT D -> GSI > 19 > > (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: UHCI Host > Controller > > uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus > number 5 > > uhci_hcd 0000:00:1a.2: irq 19, io base 0x000020a0 usb usb5: New > USB > > device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB > device > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI > Host > > Controller usb usb5: Manufacturer: Linux 2.6.32.9 uhci_hcd usb > usb5: > > SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from > 1 > > choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected > > xen_allocate_pirq: returning irq 23 for gsi 23 Already setup the > GSI :23 > > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > > uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd > 0000:00:1d.0: new > > USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: > irq 23, > > io base 0x00002080 usb usb6: New USB device found, idVendor=1d6b, > > idProduct=0001 usb usb6: New USB device strings: Mfr=3, > Product=2, > > SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: > > Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb6: SerialNumber: > > 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected > xen_allocate_pirq: > > returning irq 19 for gsi 19 Already setup the GSI :19 uhci_hcd > > 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd > > 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB > bus > > registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, > io base > > 0x00002060 usb usb7: New USB device found, idVendor=1d6b, > idProduct=0001 > > usb usb7: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 usb > > usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux > > 2.6.32.9 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: > > configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found > hub > > 7-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 18 for > gsi 18 > > Already setup the GSI :18 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI > 18 > > (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI Host > Controller > > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus > number 8 > > uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb usb8: New > USB > > device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB > device > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI > Host > > Controller usb usb8: Manufacturer: Linux 2.6.32.9 uhci_hcd usb > usb8: > > SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from > 1 > > choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected > PNP: No > > PS/2 controller found. Probing ports directly. i8042.c: No > controller > > found. mice: PS/2 mouse device common for all mice rtc_cmos > 00:03: RTC > > can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as > rtc0 > > rtc0: alarms up to one month, y3k, 114 bytes nvram device-mapper: > > uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl > (2009-04-01) > > initialised: [16][17]dm-devel@redhat.com cpuidle: using governor > ladder > > cpuidle: using governor menu usbcore: registered new interface > driver > > hiddev usbcore: registered new interface driver usbhid usbhid: > v2.6:USB > > HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 > max) > > CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please > use > > nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module > option > > or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. > ip_tables: (C) > > 2000-2006 Netfilter Core Team TCP cubic registered Initializing > XFRM > > netlink socket NET: Registered protocol family 17 registered > taskstats > > version 1 No TPM chip found, activating TPM-bypass! Magic > number: > > 2:902:788 pci 0000:00:16.6: hash matches rtc_cmos 00:03: setting > system > > clock to 2010-03-16 14:45:05 UTC (1268750705) Initalizing network > drop > > monitor service ata2: SATA link down (SStatus 0 SControl 300) > ata4: SATA > > link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus > 0 > > SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata3: > SATA > > link down (SStatus 0 SControl 300) usb 7-1: new low speed USB > device > > using uhci_hcd and address 2 > > ====================================================== [ INFO: > > SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] 2.6.32.9 #1 > > ------------------------------------------------------ khubd/100 > > [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: > (&retval->lock){......}, > > at: [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 and this task > is > > already holding: (&uhci->lock){..-...}, at: [<ffffffff8137aedd>] > > uhci_urb_enqueue+0x46/0x7e3 which would create a new lock > dependency: > > (&uhci->lock){..-...} -> (&retval->lock){......} but this new > > dependency connects a SOFTIRQ-irq-safe lock: > (&uhci->lock){..-...} ... > > which became SOFTIRQ-irq-safe at: [<ffffffff8108ea6d>] > > __lock_acquire+0x2d2/0xc07 [<ffffffff8108f46f>] > lock_acquire+0xcd/0xf2 > > [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 > > [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c > > [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a > > [<ffffffff8135a479>] rh_timer_func+0xe/0x10 > [<ffffffff810693bd>] > > run_timer_softirq+0x1a6/0x257 [<ffffffff810627e4>] > > __do_softirq+0xe6/0x1bc [<ffffffff81013fac>] > call_softirq+0x1c/0x30 > > [<ffffffff81015794>] do_softirq+0x4b/0xa7 [<ffffffff81062229>] > > irq_exit+0x4a/0x89 [<ffffffff812bf9d9>] > > xen_evtchn_do_upcall+0x156/0x172 [<ffffffff81013ffe>] > > xen_do_hypervisor_callback+0x1e/0x30 to a SOFTIRQ-irq-unsafe > lock: > > (purge_lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: ... > > [<ffffffff8108eadc>] __lock_acquire+0x341/0xc07 > [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] > _spin_lock+0x36/0x6b > > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > [<ffffffff8100e58c>] > > xen_alloc_ptpage+0x51/0x82 [<ffffffff8100e5d0>] > > xen_alloc_pud+0x13/0x15 [<ffffffff810fe3cf>] > __pud_alloc+0x79/0xb3 > > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 > > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 > [<ffffffff8110c197>] > > map_vm_area+0x34/0x47 [<ffffffff8110c2cf>] > > __vmalloc_area_node+0x125/0x14d [<ffffffff8110c379>] > > __vmalloc_node+0x82/0x91 [<ffffffff8110c4e9>] > __vmalloc+0x20/0x22 > > [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe > > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d > [<ffffffff819c1d99>] > > start_kernel+0x3de/0x426 [<ffffffff819c12c3>] > > x86_64_start_reservations+0xae/0xb2 [<ffffffff819c4d5d>] > > xen_start_kernel+0x4b9/0x4c0 other info that might help us debug > this: > > 2 locks held by khubd/100: #0: (usb_address0_mutex){+.+...}, > at: > > [<ffffffff81354f5f>] hub_port_init+0x81/0x7e4 #1: > > (&uhci->lock){..-...}, at: [<ffffffff8137aedd>] > > uhci_urb_enqueue+0x46/0x7e3 the dependencies between > SOFTIRQ-irq-safe > > lock and the holding lock: -> (&uhci->lock){..-...} ops: 0 { > > IN-SOFTIRQ-W at: [<ffffffff8108ea6d>] > > __lock_acquire+0x2d2/0xc07 > [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 > [<ffffffff81485526>] > > _spin_lock_irqsave+0x4f/0x86 > > [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c > > [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a > > [<ffffffff8135a479>] rh_timer_func+0xe/0x10 > > [<ffffffff810693bd>] run_timer_softirq+0x1a6/0x257 > > [<ffffffff810627e4>] __do_softirq+0xe6/0x1bc > > [<ffffffff81013fac>] call_softirq+0x1c/0x30 > > [<ffffffff81015794>] do_softirq+0x4b/0xa7 > > [<ffffffff81062229>] irq_exit+0x4a/0x89 > > [<ffffffff812bf9d9>] xen_evtchn_do_upcall+0x156/0x172 > > [<ffffffff81013ffe>] xen_do_hypervisor_callback+0x1e/0x30 > > INITIAL USE at: [<ffffffff8108eb29>] > > __lock_acquire+0x38e/0xc07 > [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 > [<ffffffff81485526>] > > _spin_lock_irqsave+0x4f/0x86 > [<ffffffff8137c3d7>] > > uhci_hub_control+0x74/0x401 > [<ffffffff8135bdac>] > > usb_hcd_submit_urb+0x7a6/0xa1e > > [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1 > > [<ffffffff8135d51f>] usb_start_wait_urb+0x54/0x1b1 > > [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113 > > [<ffffffff81358922>] hub_probe+0x37c/0xfaa > > [<ffffffff81360a35>] usb_probe_interface+0x15a/0x1f7 > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > [<ffffffff813077fa>] __device_attach+0x28/0x31 > > [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 > > [<ffffffff81307891>] device_attach+0x65/0x7c > > [<ffffffff8130667e>] bus_probe_device+0x27/0x3e > > [<ffffffff813045b3>] device_add+0x3ab/0x57d > > [<ffffffff8135e3ca>] usb_set_configuration+0x5b9/0x677 > > [<ffffffff81367b85>] generic_probe+0x67/0xae > > [<ffffffff813607b1>] usb_probe_device+0x7f/0x87 > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > [<ffffffff813077fa>] __device_attach+0x28/0x31 > > [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 > > [<ffffffff81307891>] device_attach+0x65/0x7c > > [<ffffffff8130667e>] bus_probe_device+0x27/0x3e > > [<ffffffff813045b3>] device_add+0x3ab/0x57d > > [<ffffffff8135616e>] usb_new_device+0x154/0x201 > > [<ffffffff8135b42e>] usb_add_hcd+0x4c5/0x69d > > [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 > > [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b > > [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > [<ffffffff813077ae>] __driver_attach+0x59/0x7d > > [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 > > [<ffffffff813073fd>] driver_attach+0x21/0x23 > > [<ffffffff81306487>] bus_add_driver+0xe1/0x26b > > [<ffffffff81307ad5>] driver_register+0xa3/0x11a > > [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 > > [<ffffffff819f403b>] uhci_hcd_init+0x88/0xc1 > > [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > [<ffffffff819c1961>] kernel_init+0x172/0x1cc > > [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key at: > > [<ffffffff8268de38>] __key.33456+0x0/0x8 ... acquired at: > > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 > [<ffffffff8108f128>] > > __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 [<ffffffff81485526>] > > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>] > > uhci_alloc_qh+0x33/0x146 [<ffffffff8137af66>] > > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>] > > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>] > > usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] > > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] > > usb_control_msg+0xee/0x113 [<ffffffff813551fb>] > > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] > > hub_events+0x91e/0x11a2 [<ffffffff81358432>] > hub_thread+0x25/0x199 > > [<ffffffff8107b8fd>] kthread+0x6e/0x76 [<ffffffff81013eaa>] > > child_rip+0xa/0x20 the dependencies between the lock to be > acquired > > and SOFTIRQ-irq-unsafe lock: -> (purge_lock){+.+...} ops: 0 { > > HARDIRQ-ON-W at: [<ffffffff8108eaba>] > > __lock_acquire+0x31f/0xc07 > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > > [<ffffffff814853bc>] _spin_lock+0x36/0x6b > > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > > [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 > > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 > > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 > > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 > > [<ffffffff8110c197>] map_vm_area+0x34/0x47 > > [<ffffffff8110c2cf>] > __vmalloc_area_node+0x125/0x14d > > [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 > > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 > > [<ffffffff819dfef1>] > alloc_large_system_hash+0x150/0x1fe > > [<ffffffff819e28c5>] > vfs_caches_init+0xa9/0x11d > > [<ffffffff819c1d99>] > start_kernel+0x3de/0x426 > > [<ffffffff819c12c3>] > > x86_64_start_reservations+0xae/0xb2 > > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 > SOFTIRQ-ON-W at: > > [<ffffffff8108eadc>] > __lock_acquire+0x341/0xc07 > > [<ffffffff8108f46f>] > lock_acquire+0xcd/0xf2 > > [<ffffffff814853bc>] _spin_lock+0x36/0x6b > > [<ffffffff8110aa20>] > > __purge_vmap_area_lazy+0x54/0x18a > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > > [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 > > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 > > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 > > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 > > [<ffffffff8110c197>] map_vm_area+0x34/0x47 > > [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d > > [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 > > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 > > [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe > > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d > > [<ffffffff819c1d99>] start_kernel+0x3de/0x426 > > [<ffffffff819c12c3>] > > x86_64_start_reservations+0xae/0xb2 > > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 INITIAL USE > at: > > [<ffffffff8108eb29>] > __lock_acquire+0x38e/0xc07 > > [<ffffffff8108f46f>] > lock_acquire+0xcd/0xf2 > > [<ffffffff814853bc>] _spin_lock+0x36/0x6b > > [<ffffffff8110aa20>] > __purge_vmap_area_lazy+0x54/0x18a > > [<ffffffff8110c82f>] > vm_unmap_aliases+0x167/0x176 > > [<ffffffff8100e58c>] > xen_alloc_ptpage+0x51/0x82 > > [<ffffffff8100e5d0>] > xen_alloc_pud+0x13/0x15 > > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > > [<ffffffff8110bf76>] > vmap_page_range_noflush+0x9a/0x264 > > [<ffffffff8110c161>] > vmap_page_range+0xe/0x10 > > [<ffffffff8110c197>] map_vm_area+0x34/0x47 > > [<ffffffff8110c2cf>] > __vmalloc_area_node+0x125/0x14d > > [<ffffffff8110c379>] > __vmalloc_node+0x82/0x91 > > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 > > [<ffffffff819dfef1>] > > alloc_large_system_hash+0x150/0x1fe > > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d > > [<ffffffff819c1d99>] start_kernel+0x3de/0x426 > > [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2 > > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 } > ... > > key at: [<ffffffff81741ef8>] purge_lock.27226+0x18/0x40 > ... > > acquired at: [<ffffffff8108f20c>] __lock_acquire+0xa71/0xc07 > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > [<ffffffff814853bc>] > > _spin_lock+0x36/0x6b [<ffffffff8110aa20>] > > __purge_vmap_area_lazy+0x54/0x18a [<ffffffff8110c82f>] > > vm_unmap_aliases+0x167/0x176 [<ffffffff8100d7ca>] > > xen_create_contiguous_region+0x51/0x106 [<ffffffff81250d84>] > > xen_swiotlb_alloc_coherent+0x62/0xa6 [<ffffffff8111188c>] > > dma_pool_alloc+0x136/0x2a8 [<ffffffff81370efe>] > > ehci_qh_alloc+0x44/0x107 [<ffffffff81373f5d>] > > ehci_pci_setup+0x22a/0x9c1 [<ffffffff8135b18e>] > > usb_add_hcd+0x225/0x69d [<ffffffff8136907b>] > > usb_hcd_pci_probe+0x270/0x3b1 [<ffffffff8125a8ad>] > > local_pci_probe+0x17/0x1b [<ffffffff8125b4c4>] > > pci_device_probe+0xcb/0xf7 [<ffffffff81307635>] > > driver_probe_device+0xf8/0x218 [<ffffffff813077ae>] > > __driver_attach+0x59/0x7d [<ffffffff813069e1>] > > bus_for_each_dev+0x54/0x83 [<ffffffff813073fd>] > > driver_attach+0x21/0x23 [<ffffffff81306487>] > > bus_add_driver+0xe1/0x26b [<ffffffff81307ad5>] > > driver_register+0xa3/0x11a [<ffffffff8125b71b>] > > __pci_register_driver+0x65/0xc2 [<ffffffff819f3ee0>] > > ehci_hcd_init+0x7f/0xc0 [<ffffffff8100a07e>] > > do_one_initcall+0x73/0x18b [<ffffffff819c1961>] > > kernel_init+0x172/0x1cc [<ffffffff81013eaa>] > child_rip+0xa/0x20 -> > > (&retval->lock){......} ops: 0 { INITIAL USE at: > > [<ffffffff8108eb29>] __lock_acquire+0x38e/0xc07 > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > > [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 > > [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 > > [<ffffffff81370efe>] ehci_qh_alloc+0x44/0x107 > > [<ffffffff81373f5d>] ehci_pci_setup+0x22a/0x9c1 > > [<ffffffff8135b18e>] usb_add_hcd+0x225/0x69d > > [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 > > [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b > > [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > [<ffffffff813077ae>] __driver_attach+0x59/0x7d > > [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 > > [<ffffffff813073fd>] driver_attach+0x21/0x23 > > [<ffffffff81306487>] bus_add_driver+0xe1/0x26b > > [<ffffffff81307ad5>] driver_register+0xa3/0x11a > > [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 > > [<ffffffff819f3ee0>] ehci_hcd_init+0x7f/0xc0 > > [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > [<ffffffff819c1961>] kernel_init+0x172/0x1cc > > [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key at: > > [<ffffffff824dc3c4>] __key.24188+0x0/0x1c ... acquired at: > > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 > [<ffffffff8108f128>] > > __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 [<ffffffff81485526>] > > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>] > > uhci_alloc_qh+0x33/0x146 [<ffffffff8137af66>] > > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>] > > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>] > > usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] > > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] > > usb_control_msg+0xee/0x113 [<ffffffff813551fb>] > > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] > > hub_events+0x91e/0x11a2 [<ffffffff81358432>] > hub_thread+0x25/0x199 > > [<ffffffff8107b8fd>] kthread+0x6e/0x76 [<ffffffff81013eaa>] > > child_rip+0xa/0x20 stack backtrace: Pid: 100, comm: khubd Not > tainted > > 2.6.32.9 #1 Call Trace: [<ffffffff8108cd50>] > check_usage+0x331/0x345 > > [<ffffffff81032d79>] ? pvclock_clocksource_read+0x47/0x80 > > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 > [<ffffffff8108f128>] > > __lock_acquire+0x98d/0xc07 [<ffffffff8111008c>] ? > > sys_swapoff+0x870/0x9d0 [<ffffffff8108f46f>] > lock_acquire+0xcd/0xf2 > > [<ffffffff8111178c>] ? dma_pool_alloc+0x36/0x2a8 > [<ffffffff81485526>] > > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] ? > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8111178c>] > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8111a986>] ? > init_object+0x73/0x7b > > [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf > > [<ffffffff8100f452>] ? check_events+0x12/0x20 > [<ffffffff8137aa7b>] > > uhci_alloc_qh+0x33/0x146 [<ffffffff8111dda9>] ? > > kmem_cache_alloc+0xd9/0x150 [<ffffffff8137af66>] > > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135a29c>] ? > > dma_map_single_attrs+0xb4/0xc6 [<ffffffff8135be92>] > > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8100ed81>] ? > > xen_force_evtchn_callback+0xd/0xf [<ffffffff8100ed81>] ? > > xen_force_evtchn_callback+0xd/0xf [<ffffffff8100f452>] ? > > check_events+0x12/0x20 [<ffffffff8108b9ea>] ? > > lockdep_init_map+0x9f/0x115 [<ffffffff8135c6b2>] > > usb_submit_urb+0x297/0x2f1 [<ffffffff8107beb6>] ? > > __init_waitqueue_head+0x3a/0x4c [<ffffffff8135d51f>] > > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8100f452>] ? > > check_events+0x12/0x20 [<ffffffff8135c939>] ? > usb_alloc_urb+0x21/0x4b > > [<ffffffff8135c907>] ? usb_init_urb+0x2a/0x3b > [<ffffffff8135d8a1>] > > usb_control_msg+0xee/0x113 [<ffffffff8111c5ef>] ? > > kmem_cache_alloc_notrace+0xe8/0x111 [<ffffffff8135517a>] ? > > hub_port_init+0x29c/0x7e4 [<ffffffff813551fb>] > > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] > hub_events+0x91e/0x11a2 > > [<ffffffff8135840d>] ? hub_thread+0x0/0x199 > [<ffffffff81358432>] > > hub_thread+0x25/0x199 [<ffffffff8107bb4f>] ? > > autoremove_wake_function+0x0/0x3d [<ffffffff8107b8fd>] > > kthread+0x6e/0x76 [<ffffffff81013eaa>] child_rip+0xa/0x20 > > [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > > [<ffffffff81013810>] ? restore_args+0x0/0x30 > [<ffffffff8107b9f2>] ? > > kthreadd+0xed/0x10f [<ffffffff81013ea0>] ? child_rip+0x0/0x20 > ata1: > > SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: > Hitachi > > HDT721025SLA380, STBOA3AA, max UDMA/133 ata1.00: 488397168 > sectors, > > multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for > UDMA/133 > > scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO > PQ: 0 > > ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 > GB/232 > > GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: > [sda] > > Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd > > 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > > support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached > SCSI disk > > Freeing unused kernel memory: 3396k freed Write protecting the > kernel > > read-only data: 6988k Red Hat nash version 5.1.19.6 starting > Mounting > > proc filesystem Mounting sysfs filesystem Creating /dev Creating > initial > > device nodes Setting up hotplug. usb 7-1: New USB device found, > > idVendor=0458, idProduct=0007 usb 7-1: New USB device strings: > Mfr=2, > > Product=1, SerialNumber=0 usb 7-1: Product: Optical Mouse usb > 7-1: > > Manufacturer: KYE usb 7-1: configuration #1 chosen from 1 choice > input: > > KYE Optical Mouse as > > /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input3 > > generic-usb 0003:0458:0007.0001: input,hidraw0: USB HID v1.10 > Mouse [KYE > > Optical Mouse] on usb-0000:00:1d.1-1/input0 Creating block device > nodes. > > Loading aacraid.ko module Adaptec aacraid driver 1.1-5[2461]-ms > Scanning > > and configuring dmraid supported devices Scanning logical volumes > > Reading all physical volumes. This may take a while... > Activating > > logical volumes Volume group "VolGroup01" not found Trying to > resume > > from /dev/VolGroup01/LogVol01 Unable to access resume device > > (/dev/VolGroup01/LogVol01) Creating root device. Mounting root > > filesystem. mount: could not find filesystem '/dev/root' Setting > up > > other filesystems. Setting up new root fs setuproot: moving /dev > failed: > > No such file or directory no fstab.sys, mounting internal > defaults > > setuproot: error mounting /proc: No such file or directory > setuproot: > > error mounting /sys: No such file or directory Switching to new > root and > > running init. unmounting old /dev unmounting old /proc unmounting > old > > /sys switchroot: mount failed: No such file or directory init > used > > greatest stack depth: 4088 bytes left Kernel panic - not syncing: > > Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.32.9 > #1 Call > > Trace: [<ffffffff8105b73f>] panic+0xa5/0x167 > [<ffffffff8100ed81>] ? > > xen_force_evtchn_callback+0xd/0xf [<ffffffff8105f2ab>] ? > > do_exit+0x38a/0x701 [<ffffffff8100f43f>] ? > > xen_restore_fl_direct_end+0x0/0x1 [<ffffffff8108f81b>] ? > > lock_release+0x179/0x184 [<ffffffff8108ca1d>] ? > > trace_hardirqs_on+0xd/0xf [<ffffffff81484fcf>] ? > > _write_unlock_irq+0x37/0x3c [<ffffffff8105ef9f>] > do_exit+0x7e/0x701 > > [<ffffffff8105f6be>] sys_exit_group+0x0/0x1b > [<ffffffff8105f6d5>] > > sys_exit_group+0x17/0x1b [<ffffffff81012d72>] > > system_call_fastpath+0x16/0x1b > > > > References > > > > Visible links > > 1. mailto:[18]pasik@iki.fi > > 2. mailto:[19]pasik@iki.fi > > 3. > [20]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 4. > [21]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 5. mailto:[22]pasik@iki.fi > > 6. > [23]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 7. > [24]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 8. mailto:[25]pasik@iki.fi > > 9. mailto:[26]pasik@iki.fi > > 10. > [27]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 11. > [28]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 12. mailto:[29]pasik@iki.fi > > 13. > [30]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 14. > [31]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 15. mailto:[32]pasik@iki.fi > > 16. mailto:[33]dm-devel@redhat.com > > References > > Visible links > 1. mailto:pasik@iki.fi > 2. mailto:pasik@iki.fi > 3. mailto:pasik@iki.fi > 4. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 5. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 6. mailto:pasik@iki.fi > 7. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 8. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 9. mailto:pasik@iki.fi > 10. mailto:pasik@iki.fi > 11. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 12. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 13. mailto:pasik@iki.fi > 14. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 15. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 16. mailto:pasik@iki.fi > 17. mailto:dm-devel@redhat.com > 18. mailto:pasik@iki.fi > 19. mailto:pasik@iki.fi > 20. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 21. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 22. mailto:pasik@iki.fi > 23. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 24. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 25. mailto:pasik@iki.fi > 26. mailto:pasik@iki.fi > 27. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 28. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 29. mailto:pasik@iki.fi > 30. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 31. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 32. mailto:pasik@iki.fi > 33. mailto:dm-devel@redhat.com ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-16 23:18 ` Pasi Kärkkäinen @ 2010-03-17 22:20 ` kishore kumar 2010-03-18 0:34 ` kishore kumar 2010-03-18 16:15 ` Pasi Kärkkäinen 0 siblings, 2 replies; 32+ messages in thread From: kishore kumar @ 2010-03-17 22:20 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users [-- Attachment #1.1: Type: text/plain, Size: 95105 bytes --] Here is the output of df -h and cat /etc/fstab of my machine. Please let me know your thoughts. [root@localhost kishore]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup01-LogVol00 223G 29G 182G 14% / /dev/sda1 99M 81M 13M 87% /boot tmpfs 757M 0 757M 0% /dev/shm [root@localhost kishore]# cat /etc/fstab /dev/VolGroup01/LogVol00 / ext3 defaults 1 1 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/VolGroup01/LogVol01 swap swap defaults 0 0 [root@localhost kishore]# On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote: > On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore kumar wrote: > > I am not sure. Can you please let me know how to check this? any > command > > ?? > > well simple "df -h" will show it. and also "cat /etc/fstab". > You can also check it from your grub configuration.. from the working > baremetal (non-Xen) entry. > > -- Pasi > > > > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi Kärkkäinen <[1]pasik@iki.fi> > wrote: > > > > On Tue, Mar 16, 2010 at 03:22:50PM -0700, kishore kumar wrote: > > > attached is the log captured in with the word document . > > > > > > > Scanning logical volumes > > Reading all physical volumes. This may take a while... > > Activating logical volumes > > Volume group "VolGroup01" not found > > Trying to resume from /dev/VolGroup01/LogVol01 > > Unable to access resume device (/dev/VolGroup01/LogVol01) > > Creating root device. > > Mounting root filesystem. > > mount: could not find filesystem '/dev/root' > > Setting up other filesystems. > > Setting up new root fs > > setuproot: moving /dev failed: No such file or directory > > no fstab.sys, mounting internal defaults > > setuproot: error mounting /proc: No such file or directory > > setuproot: error mounting /sys: No such file or directory > > Switching to new root and running init. > > unmounting old /dev > > unmounting old /proc > > unmounting old /sys > > switchroot: mount failed: No such file or directory > > init used greatest stack depth: 4088 bytes left > > Kernel panic - not syncing: Attempted to kill init! > > > > So it seems it gets all the way to executing the initrd image, > > which then fails to mount the root fs. > > > > Earlier in the log: > > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > > ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA, max UDMA/133 > > ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA > > ata1.00: configured for UDMA/133 > > scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 > > ANSI: 5 > > sd 0:0:0:0: Attached scsi generic sg0 type 0 > > sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 > GiB) > > sd 0:0:0:0: [sda] Write Protect is off > > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > > support DPO or FUA > > sda: sda1 sda2 > > sd 0:0:0:0: [sda] Attached SCSI disk > > > > so /dev/sda was detected. Is your root lvm volume on /dev/sda ? > > Is /dev/VolGroup01/LogVol01 really your root fs? > > > > -- Pasi > > > > > > > > > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi Kärkkäinen > > <[1][2]pasik@iki.fi> wrote: > > > > > > On Tue, Mar 16, 2010 at 02:56:06PM -0700, kishore kumar > wrote: > > > > Please find the attached log file after fixing the dom 0 > > kernel cmd > > > line > > > > as below > > > > > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 > > earlyprintk=xen > > > nomodeset > > > > > > > > > > There's something wrong with the log, the dom0 kernel parts > are > > all on > > > one line.. > > > It's really difficult to read it. > > > > > > -- Pasi > > > > > > > Thanks > > > > > > > > > > > > On Tue, Mar 16, 2010 at 2:29 PM, Pasi Kärkkäinen > > > <[1][2][3]pasik@iki.fi> wrote: > > > > > > > > On Tue, Mar 16, 2010 at 02:16:22PM -0700, kishore > kumar > > wrote: > > > > > I did below steps. > > > > > > > > > > > > > > > I pulled DOM 0 kernel from > > > > > git clone > > > > > > > > > git://[1][2][3][4] > git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > linux-2.6-xen > > > > > > > > > > cd linux-2.6-xen > > > > > > > > > > make clean > > > > > > > > > > cp -a .config .config-old > > > > > > > > > > wget -O .config > > > > > > > > > > > > > > [2][3][4][5] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > > > make oldconfig > > > > > > > > > > make bzImage > > > > > > > > > > make modules > > > > > > > > > > make modules_install > > > > > > > > > > cp -a .config /boot/config-2.6.32.9 > > > > > > > > > > cp -a System.map /boot/System.map-2.6.32.9 > > > > > > > > > > cp -a arch/x86/boot/bzImage > /boot/vmlinuz-2.6.32.9 > > > > > > > > > > and modified the grub.conf as below > > > > > > > > > > > > > > > Root(hd0,0) > > > > > > > > > > kernel /xen.gz console=vga,com1 com1=115200,8n1 > > msi=1 > > > iommu=1 > > > > > > > > > > module /vmlinuz-2.6.32.9 ro > > root=/dev/VolGroup01/LogVo100 > > > rhgb > > > > quiet > > > > > > > > > > module /initrd-2.6.32.9.img > > > > > > > > > > > > > > > and rebooted the machine. Then It booted with > some > > xen > > > messages > > > > and > > > > > stopped. Those were the messages captured from > > serial > > > console. > > > > > > > > > > Please let me know if I did something wrong here. > > > > > > > > > > > > > Please fix the kernel cmdline based on my earlier > email, > > and > > > capture and > > > > post the > > > > serial console log again! > > > > > > > > -- Pasi > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 1:20 PM, Pasi Kärkkäinen > > > > <[3][4][5][6]pasik@iki.fi> wrote: > > > > > > > > > > On Tue, Mar 16, 2010 at 01:16:28PM -0700, > Jeremy > > > Fitzhardinge > > > > wrote: > > > > > > On 03/16/2010 12:48 PM, Pasi Kärkkäinen > wrote: > > > > > >> On Tue, Mar 16, 2010 at 09:43:44PM +0200, > Pasi > > > Kärkkäinen > > > > wrote: > > > > > >> > > > > > >>> On Tue, Mar 16, 2010 at 10:32:17AM -0700, > > kishore > > > kumar > > > > wrote: > > > > > >>> > > > > > >>>> Attached is the output captured from > > serial > > > console. > > > > > >>>> > > > > > >>>> Machine does not boot after compiling > xen > > 3.4.3 > > > with > > > > pv_ops dom > > > > > 0 kernel. > > > > > >>>> > > > > > >>>> Please let me know what is going wrong > > here. > > > > > >>>> > > > > > >>>> > > > > > >>> Ok this looks like a bug that is already > being > > sorted > > > out on > > > > > xen-devel mailinglist. > > > > > >>> I added CC to xen-devel. > > > > > >>> > > > > > >>> > > > > > >> > > > > > > > > > > > > Those messages are not a problem in > themselves, > > but the > > > related > > > > > problem > > > > > > is believed to be fixed in current > > xen/stable-2.6.32.x. > > > It > > > > looks like > > > > > > the output stops there because the Xen > console > > isn't set > > > up > > > > properly > > > > > for > > > > > > some reason. > > > > > > > > > > > > > > > > Yeah, remove "rhgb quiet" from the options.. > the > > dom0 > > > kernel > > > > cmdline > > > > > should be like this: > > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 > > > earlyprintk=xen > > > > nomodeset > > > > > -- Pasi > > > > > > > > > > References > > > > > > > > > > Visible links > > > > > 1. > > > > > [5][6][7] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > 2. > > > > > > > > > [6][7][8] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > 3. mailto:[7][8][9]pasik@iki.fi > > > > > > > > References > > > > > > > > Visible links > > > > 1. mailto:[9][10]pasik@iki.fi > > > > 2. > > > > > [10][11] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > 3. > > > > > [11][12] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > 4. mailto:[12][13]pasik@iki.fi > > > > 5. > > > > > [13][14] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > 6. > > > > > [14][15] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > 7. mailto:[15][16]pasik@iki.fi > > > > Asserting Post complete GPIO!!! > > > > Transfer control to CSM 16-bit binary for legacy boot > > > > __ __ _____ _ _ _____ _ _ > > > > \ \/ /___ _ __ |___ /| || | |___ / _ __ ___| || | > _ > > __ _ > > > __ ___ > > > > \ // _ \ '_ \ |_ \| || |_ |_ \ __| '__/ __| || |_ > __| > > '_ \| > > > '__/ _ \ > > > > / \ __/ | | | ___) |__ _| ___) |__| | | (__|__ > _|__| > > |_) | | > > > | __/ > > > > /_/\_\___|_| |_| |____(_) |_|(_)____/ |_| \___| |_| > | > > .__/|_| > > > \___| > > > > > |_| > > > > (XEN) Xen version 3.4.3-rc4-pre (kishore@localdomain) (gcc > > version > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar 15 13:44:31 PDT > 2010 > > > > (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 2010 +0000 > > > 19924:6e72f8c3c017 > > > > (XEN) Command line: console=vga,com1 com1=115200,8n1 msi=1 > > iommu=1 > > > > (XEN) Video information: > > > > (XEN) VGA is text mode 80x25, font 8x16 > > > > (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds > > > > (XEN) EDID info not retrieved because no DDC retrieval > method > > > detected > > > > (XEN) Disc information: > > > > (XEN) Found 1 MBR signatures > > > > (XEN) Found 1 EDD information structures > > > > (XEN) Xen-e820 RAM map: > > > > (XEN) 0000000000000000 - 000000000009d000 (usable) > > > > (XEN) 000000000009d000 - 00000000000a0000 (reserved) > > > > (XEN) 00000000000e0000 - 0000000000100000 (reserved) > > > > (XEN) 0000000000100000 - 000000006d597000 (usable) > > > > (XEN) 000000006d597000 - 000000006d686000 (reserved) > > > > (XEN) 000000006d686000 - 000000006f598000 (usable) > > > > (XEN) 000000006f598000 - 000000006f59a000 (reserved) > > > > (XEN) 000000006f59a000 - 000000006f5af000 (ACPI NVS) > > > > (XEN) 000000006f5af000 - 000000006f5d9000 (reserved) > > > > (XEN) 000000006f5d9000 - 000000006f5f9000 (ACPI data) > > > > (XEN) 000000006f5f9000 - 000000006f6df000 (ACPI NVS) > > > > (XEN) 000000006f6df000 - 000000006f700000 (ACPI data) > > > > (XEN) 000000006f700000 - 0000000080000000 (reserved) > > > > (XEN) 00000000a0000000 - 00000000b0000000 (reserved) > > > > (XEN) 00000000fc000000 - 00000000fd000000 (reserved) > > > > (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) > > > > (XEN) 00000000ffc00000 - 0000000100000000 (reserved) > > > > (XEN) System RAM: 1780MB (1823000kB) > > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL ) > > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL THRLY > 0 > > > 1000013) > > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL THRLY > 0 > > MSFT > > > 100000D) > > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL THRLY > 3 > > MSFT > > > 100000D) > > > > (XEN) ACPI: FACS 6F5F9000, 0040 > > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL THRLY > 0 > > MSFT > > > 100000D) > > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL THRLY > 1 > > MSFT > > > 100000D) > > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL THRLY > 1 > > MSFT > > > 100000D) > > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL THRLY > 1 > > MSFT > > > 100000D) > > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL THRLY > 0 > > MSFT > > > 100000D) > > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 INTEL SSDT PM > 4000 > > INTL > > > 20061109) > > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL THRLY > 1 > > MSFT > > > 100000D) > > > > (XEN) Domain heap initialised > > > > (XEN) Processor #0 6:12 APIC version 21 > > > > (XEN) Processor #2 6:12 APIC version 21 > > > > (XEN) Processor #4 6:12 APIC version 21 > > > > (XEN) Processor #16 6:12 APIC version 21 > > > > (XEN) Processor #18 6:12 APIC version 21 > > > > (XEN) Processor #20 6:12 APIC version 21 > > > > (XEN) Processor #1 6:12 APIC version 21 > > > > (XEN) Processor #3 6:12 APIC version 21 > > > > (XEN) Processor #5 6:12 APIC version 21 > > > > (XEN) Processor #17 6:12 APIC version 21 > > > > (XEN) Processor #19 6:12 APIC version 21 > > > > (XEN) Processor #21 6:12 APIC version 21 > > > > (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, > GSI > > 0-23 > > > > (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec90000, > GSI > > 24-47 > > > > (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs > > > > (XEN) Intel VT-d DMAR tables have been parsed. > > > > (XEN) Using scheduler: SMP Credit Scheduler (credit) > > > > (XEN) Detected 3200.207 MHz processor. > > > > (XEN) VMX: Supported advanced features: > > > > (XEN) - APIC MMIO access virtualisation > > > > (XEN) - APIC TPR shadow > > > > (XEN) - Extended Page Tables (EPT) > > > > (XEN) - Virtual-Processor Identifiers (VPID) > > > > (XEN) - Virtual NMI > > > > (XEN) - MSR direct-access bitmap > > > > (XEN) VMX: EPT is available. > > > > (XEN) VMX: VPID is available. > > > > (XEN) HVM: VMX enabled > > > > (XEN) HVM: Hardware Assisted Paging detected. > > > > (XEN) CPU0: Intel Genuine Intel(R) CPU 000 @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 1/2 eip 88000 > > > > (XEN) CPU1: Intel Genuine Intel(R) CPU 000 @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 2/4 eip 88000 > > > > (XEN) CPU2: Intel Genuine Intel(R) CPU 000 @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 3/16 eip 88000 > > > > (XEN) CPU3: Intel Genuine Intel(R) CPU 000 @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 4/18 eip 88000 > > > > (XEN) CPU4: Intel Genuine Intel(R) CPU 000 @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 5/20 eip 88000 > > > > (XEN) CPU5: Intel Genuine Intel(R) CPU 000 @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 6/1 eip 88000 > > > > (XEN) CPU6: Intel Genuine Intel(R) CPU 000 @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 7/3 eip 88000 > > > > (XEN) CPU7: Intel Genuine Intel(R) CPU 000 @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 8/5 eip 88000 > > > > (XEN) CPU8: Intel Genuine Intel(R) CPU 000 @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 9/17 eip 88000 > > > > (XEN) CPU9: Intel Genuine Intel(R) CPU 000 @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 10/19 eip 88000 > > > > (XEN) CPU10: Intel Genuine Intel(R) CPU 000 @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 11/21 eip 88000 > > > > (XEN) CPU11: Intel Genuine Intel(R) CPU 000 @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Total of 12 processors activated. > > > > (XEN) ENABLING IO-APIC IRQs > > > > (XEN) -> Using new ACK method > > > > (XEN) checking TSC synchronization across 12 CPUs: passed. > > > > (XEN) Platform timer is 14.318MHz HPET > > > > ?(XEN) Brought up 12 CPUs > > > > (XEN) Intel VT-d Snoop Control supported. > > > > (XEN) Intel VT-d DMA Passthrough not supported. > > > > (XEN) Intel VT-d Queued Invalidation supported. > > > > (XEN) Intel VT-d Interrupt Remapping supported. > > > > (XEN) I/O virtualisation enabled > > > > (XEN) I/O virtualisation for PV guests disabled > > > > (XEN) xenoprof: Initialization failed. Intel processor > model 44 > > for P6 > > > class family is not supported > > > > (XEN) *** LOADING DOMAIN 0 *** > > > > (XEN) Xen kernel: 64-bit, lsb, compat32 > > > > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> > > 0x26bb000 > > > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > > > (XEN) Dom0 alloc.: 0000000064000000->0000000068000000 > > (404490 pages > > > to be allocated) > > > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > > > (XEN) Loaded kernel: ffffffff81000000->ffffffff826bb000 > > > > (XEN) Init. ramdisk: ffffffff826bb000->ffffffff82d0d800 > > > > (XEN) Phys-Mach map: ffffffff82d0e000->ffffffff83044050 > > > > (XEN) Start info: ffffffff83045000->ffffffff830454b4 > > > > (XEN) Page tables: ffffffff83046000->ffffffff83063000 > > > > (XEN) Boot stack: ffffffff83063000->ffffffff83064000 > > > > (XEN) TOTAL: ffffffff80000000->ffffffff83400000 > > > > (XEN) ENTRY ADDRESS: ffffffff819c1200 > > > > (XEN) Dom0 has maximum 12 VCPUs > > > > (XEN) Scrubbing Free RAM: .done. > > > > (XEN) Xen trace buffers: disabled > > > > (XEN) Std. Loglevel: Errors and warnings > > > > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and > > warnings) > > > > (XEN) Xen is relinquishing VGA console. > > > > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times > to > > switch > > > input to Xen) > > > > (XEN) Freed 128kB init memory. > > > > mapping kernel into physical memory > > > > Xen: setup ISA identity maps > > > > about to get started... > > > > Initializing cgroup subsys cpuset > > > > Initializing cgroup subsys cpu > > > > Linux version 2.6.32.9 (kishore@localhost.localdomain) > (gcc > > version > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 15 15:16:28 > PDT > > 2010 > > > > Command line: ro root=/dev/VolGroup01/LogVol00 console=hvc0 > > > earlyprintk=xen nomodeset > > > > KERNEL supported cpus: > > > > Intel GenuineIntel > > > > AMD AuthenticAMD > > > > Centaur CentaurHauls > > > > BIOS-provided physical RAM map: > > > > Xen: 0000000000000000 - 000000000009d000 (usable) > > > > Xen: 000000000009d000 - 0000000000100000 (reserved) > > > > Xen: 0000000000100000 - 0000000066c0a000 (usable) > > > > Xen: 000000006d597000 - 000000006d686000 (reserved) > > > > Xen: 000000006f598000 - 000000006f59a000 (reserved) > > > > Xen: 000000006f59a000 - 000000006f5af000 (ACPI NVS) > > > > Xen: 000000006f5af000 - 000000006f5d9000 (reserved) > > > > Xen: 000000006f5d9000 - 000000006f5f9000 (ACPI data) > > > > Xen: 000000006f5f9000 - 000000006f6df000 (ACPI NVS) > > > > Xen: 000000006f6df000 - 000000006f700000 (ACPI data) > > > > Xen: 000000006f700000 - 0000000080000000 (reserved) > > > > Xen: 00000000a0000000 - 00000000b0000000 (reserved) > > > > Xen: 00000000fc000000 - 00000000fd000000 (reserved) > > > > Xen: 00000000fed1c000 - 00000000fed20000 (reserved) > > > > Xen: 00000000ffc00000 - 0000000100000000 (reserved) > > > > bootconsole [xenboot0] enabled > > > > DMI 2.4 present. > > > > last_pfn = 0x66c0a max_arch_pfn = 0x400000000 > > > > init_memory_mapping: 0000000000000000-0000000066c0a000 > > > > RAMDISK: 026bb000 - 02d0d800 > > > > ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL ) > > > > ACPI: XSDT 000000006f6fe120 00064 (v01 INTEL THRLY > 00000000 > > > 01000013) > > > > ACPI: FACP 000000006f6fd000 000F4 (v04 INTEL THRLY > 00000000 > > MSFT > > > 0100000D) > > > > ACPI: DSDT 000000006f6f5000 074F1 (v02 INTEL THRLY > 00000003 > > MSFT > > > 0100000D) > > > > ACPI: FACS 000000006f5f9000 00040 > > > > ACPI: APIC 000000006f6f4000 001CC (v02 INTEL THRLY > 00000000 > > MSFT > > > 0100000D) > > > > ACPI: MCFG 000000006f6f3000 0003C (v01 INTEL THRLY > 00000001 > > MSFT > > > 0100000D) > > > > ACPI: HPET 000000006f6f2000 00038 (v01 INTEL THRLY > 00000001 > > MSFT > > > 0100000D) > > > > ACPI: SLIT 000000006f6f1000 00030 (v01 INTEL THRLY > 00000001 > > MSFT > > > 0100000D) > > > > ACPI: WDDT 000000006f6f0000 00040 (v01 INTEL THRLY > 00000000 > > MSFT > > > 0100000D) > > > > ACPI: SSDT 000000006f5d9000 1FDDC (v01 INTEL SSDT PM > 00004000 > > INTL > > > 20061109) > > > > ACPI: 000000006f6ee000 001D0 (v01 INTEL THRLY > 00000001 > > MSFT > > > 0100000D) > > > > No NUMA configuration found > > > > Faking a node at 0000000000000000-0000000066c0a000 > > > > Bootmem setup node 0 0000000000000000-0000000066c0a000 > > > > NODE_DATA [0000000000008000 - 000000000001ffff] > > > > bootmap [0000000000020000 - 000000000002cd87] pages d > > > > (9 early reservations) ==> bootmem [0000000000 - > 0066c0a000] > > > > #0 [0000000000 - 0000001000] BIOS data page ==> > [0000000000 > > - > > > 0000001000] > > > > #1 [0003046000 - 0003063000] XEN PAGETABLES ==> > [0003046000 > > - > > > 0003063000] > > > > #2 [0000006000 - 0000008000] TRAMPOLINE ==> > [0000006000 > > - > > > 0000008000] > > > > #3 [0001000000 - 000269ae98] TEXT DATA BSS ==> > [0001000000 > > - > > > 000269ae98] > > > > #4 [00026bb000 - 0002d0d800] RAMDISK ==> > [00026bb000 > > - > > > 0002d0d800] > > > > #5 [0002d0e000 - 0003046000] XEN START INFO ==> > [0002d0e000 > > - > > > 0003046000] > > > > #6 [000269b000 - 000269b011] BRK ==> > [000269b000 > > - > > > 000269b011] > > > > #7 [0000100000 - 000041a000] PGTABLE ==> > [0000100000 > > - > > > 000041a000] > > > > #8 [0000001000 - 0000001030] ACPI SLIT ==> > [0000001000 > > - > > > 0000001030] > > > > found SMP MP-table at [ffff8800000fd750] fd750 > > > > Zone PFN ranges: > > > > DMA 0x00000000 -> 0x00001000 > > > > DMA32 0x00001000 -> 0x00100000 > > > > Normal 0x00100000 -> 0x00100000 > > > > Movable zone start PFN for each node > > > > early_node_map[2] active PFN ranges > > > > 0: 0x00000000 -> 0x0000009d > > > > 0: 0x00000100 -> 0x00066c0a > > > > ACPI: PM-Timer IO Port: 0x408 > > > > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > > > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) > > > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) > > > > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled) > > > > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled) > > > > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) > > > > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] enabled) > > > > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) > > > > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] enabled) > > > > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled) > > > > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled) > > > > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled) > > > > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) > > > > ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1]) > > > > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > > > > IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI > 0-0 > > > > ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24]) > > > > IOAPIC[1]: apic_id 9, version 0, address 0xfec90000, GSI > 24-24 > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > > > ERROR: Unable to locate IOAPIC for GSI 2 > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > > > > ERROR: Unable to locate IOAPIC for GSI 9 > > > > Using ACPI (MADT) for SMP configuration information > > > > ACPI: HPET id: 0x8086a401 base: 0xfed00000 > > > > SMP: Allowing 12 CPUs, 0 hotplug CPUs > > > > PM: Registered nosave memory: 000000000009d000 - > > 0000000000100000 > > > > Allocating PCI resources starting at b0000000 (gap: > > b0000000:4c000000) > > > > Booting paravirtualized kernel on Xen > > > > Xen version: 3.4.3-rc4-pre (preserve-AD) (dom0) > > > > NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1 > > > > PERCPU: Embedded 478 pages/cpu @ffff880005ebc000 s1928024 > r8192 > > d21672 > > > u1957888 > > > > pcpu-alloc: s1928024 r8192 d21672 u1957888 alloc=478*4096 > > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] > 06 > > [0] 07 > > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 > > > > Xen: using vcpu_info placement > > > > Built 1 zonelists in Node order, mobility grouping on. > Total > > pages: > > > 409291 > > > > Policy zone: DMA32 > > > > Kernel command line: ro root=/dev/VolGroup01/LogVol00 > > console=hvc0 > > > earlyprintk=xen nomodeset > > > > PID hash table entries: 4096 (order: 3, 32768 bytes) > > > > Initializing CPU#0 > > > > DMA: Placing 64MB software IO TLB between ffff880007525000 > - > > > ffff88000b525000 > > > > DMA: software IO TLB at phys 0x7525000 - 0xb525000 > > > > xen_swiotlb_fixup: buf=ffff880007525000 size=67108864 > > > > xen_swiotlb_fixup: buf=ffff88000b585000 size=32768 > > > > Memory: 1514268k/1683496k available (4654k kernel code, > 396k > > absent, > > > 168832k reserved, 3443k data, 3396k init) > > > > SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, > > CPUs=12, > > > Nodes=1 > > > > Hierarchical RCU implementation. > > > > NR_IRQS:4352 nr_irqs:3072 > > > > Already setup the GSI :0 > > > > Already setup the GSI :1 > > > > Already setup the GSI :2 > > > > Already setup the GSI :3 > > > > Already setup the GSI :4 > > > > Already setup the GSI :5 > > > > Already setup the GSI :6 > > > > Already setup the GSI :7 > > > > Already setup the GSI :8 > > > > Already setup the GSI :9 > > > > Already setup the GSI :10 > > > > Already setup the GSI :11 > > > > Already setup the GSI :12 > > > > Already setup the GSI :13 > > > > Already setup the GSI :14 > > > > Already setup the GSI :15 > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > > > > xen: sci override: source_irq=9 global_irq=9 trigger=c > > polarity=1 > > > > xen_allocate_pirq: returning irq 9 for gsi 9 > > > > Already setup the GSI :9 > > > > xen: acpi sci 9 > > > > Console: colour VGA+ 80x25 > > > > console [hvc0] enabled, bootconsole disabled console [hvc0] > > enabled, > > > bootconsole disabled > > > > Lock dependency validator: Copyright (c) 2006 Red Hat, > Inc., > > Ingo > > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: > > 48 > > > ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: > > 4096 ... > > > MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: > 32768 > > ... > > > CHAINHASH_SIZE: 16384 memory used by lock > dependency > > info: > > > 6367 kB per task-struct memory footprint: 2688 bytes > allocated > > 17039360 > > > bytes of page_cgroup please try 'cgroup_disable=memory' > option if > > you > > > don't want memory cgroups installing Xen timer for CPU 0 > Detected > > > 3200.206 MHz processor. Calibrating delay loop (skipped), > value > > > calculated using timer frequency.. 6400.41 BogoMIPS > (lpj=3200206) > > > Security Framework initialized SELinux: Initializing. Dentry > > cache hash > > > table entries: 262144 (order: 9, 2097152 bytes) Inode-cache > hash > > table > > > entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash > table > > > entries: 256 Initializing cgroup subsys ns Initializing > cgroup > > subsys > > > cpuacct Initializing cgroup subsys memory Initializing cgroup > > subsys > > > devices Initializing cgroup subsys freezer Initializing > cgroup > > subsys > > > net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: > 256K > > CPU: > > > L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU: Unsupported number > of > > siblings > > > 32 Performance Events: unsupported p6 CPU model 44 no PMU > driver, > > > software events only. lockdep: fixing up alternatives. SMP > > alternatives: > > > switching to UP code ACPI: Core revision 20090903 ftrace: > > converting > > > mcount calls to 0f 1f 44 00 00 ftrace: allocating 27971 > entries > > in 110 > > > pages installing Xen timer for CPU 1 lockdep: fixing up > > alternatives. > > > SMP alternatives: switching to SMP code Initializing CPU#1 > CPU: > > L1 I > > > cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 > cache: > > 12288K > > > CPU 1/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > > installing > > > Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I cache: 32K, > L1 D > > cache: > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 2/0x0 -> > Node 0 > > CPU: > > > Unsupported number of siblings 32 installing Xen timer for > CPU 3 > > > Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: > L2 > > cache: > > > 256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node 0 CPU: > Unsupported > > number > > > of siblings 32 installing Xen timer for CPU 4 Initializing > CPU#4 > > CPU: L1 > > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 > cache: > > 12288K > > > CPU 4/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > > installing > > > Xen timer for CPU 5 Initializing CPU#5 CPU: L1 I cache: 32K, > L1 D > > cache: > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 5/0x0 -> > Node 0 > > CPU: > > > Unsupported number of siblings 32 installing Xen timer for > CPU 6 > > > Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: > L2 > > cache: > > > 256K CPU: L3 cache: 12288K CPU 6/0x0 -> Node 0 CPU: > Unsupported > > number > > > of siblings 32 installing Xen timer for CPU 7 Initializing > CPU#7 > > CPU: L1 > > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 > cache: > > 12288K > > > CPU 7/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > > installing > > > Xen timer for CPU 8 Initializing CPU#8 CPU: L1 I cache: 32K, > L1 D > > cache: > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 8/0x0 -> > Node 0 > > CPU: > > > Unsupported number of siblings 32 installing Xen timer for > CPU 9 > > > Initializing CPU#9 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: > L2 > > cache: > > > 256K CPU: L3 cache: 12288K CPU 9/0x0 -> Node 0 CPU: > Unsupported > > number > > > of siblings 32 installing Xen timer for CPU 10 Initializing > > CPU#10 CPU: > > > L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 > > cache: > > > 12288K CPU 10/0x0 -> Node 0 CPU: Unsupported number of > siblings > > 32 > > > installing Xen timer for CPU 11 Initializing CPU#11 CPU: L1 I > > cache: > > > 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: > 12288K > > CPU > > > 11/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > Brought > > up 12 > > > CPUs Grant table initialized regulator: core version 0.5 > Time: > > 14:45:00 > > > Date: 03/16/10 NET: Registered protocol family 16 > > xenbus_probe_init ok > > > ACPI FADT declares the system doesn't support PCIe ASPM, so > > disable it > > > ACPI: bus type pci registered PCI: MCFG configuration 0: base > > a0000000 > > > segment 0 buses 0 - 255 PCI: MCFG area at a0000000 reserved > in > > E820 PCI: > > > Using MMCONFIG at a0000000 - afffffff PCI: Using > configuration > > type 1 > > > for base access bio: create slab <bio-0> at 0 ACPI Error: > Field > > [CPB3] > > > at 96 exceeds Buffer [NULL] size 64 (bits) > > (20090903/dsopcode-596) ACPI > > > Error (psparse-0537): Method parse/execution failed > [\_SB_._OSC] > > (Node > > > ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI: Interpreter > enabled > > ACPI: > > > (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt > > routing ACPI > > > Warning: Incorrect checksum in table [ ] - 97, should be > DB > > > (20090903/tbutils-314) ACPI: No dock devices found. ACPI: PCI > > Root > > > Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from > D0 > > D3hot > > > D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: PME# > > supported > > > from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci > > 0000:00:03.0: > > > PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# > > disabled pci > > > 0000:00:04.0: PME# supported from D0 D3hot D3cold pci > > 0000:00:04.0: PME# > > > disabled pci 0000:00:05.0: PME# supported from D0 D3hot > D3cold > > pci > > > 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported > from > > D0 > > > D3hot D3cold pci 0000:00:06.0: PME# disabled pci > 0000:00:07.0: > > PME# > > > supported from D0 D3hot D3cold pci 0000:00:07.0: PME# > disabled > > pci > > > 0000:00:08.0: PME# supported from D0 D3hot D3cold pci > > 0000:00:08.0: PME# > > > disabled pci 0000:00:09.0: PME# supported from D0 D3hot > D3cold > > pci > > > 0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME# supported > from > > D0 > > > D3hot D3cold pci 0000:00:0a.0: PME# disabled pci > 0000:00:13.0: > > PME# > > > supported from D0 D3hot D3cold pci 0000:00:13.0: PME# > disabled > > pci > > > 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci > > 0000:00:1a.7: PME# > > > disabled pci 0000:00:1c.0: PME# supported from D0 D3hot > D3cold > > pci > > > 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported > from > > D0 > > > D3hot D3cold pci 0000:00:1c.4: PME# disabled pci > 0000:00:1c.5: > > PME# > > > supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# > disabled > > pci > > > 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci > > 0000:00:1d.7: PME# > > > disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by > > ICH6 > > > ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f > claimed > > by ICH6 > > > GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at > 0680 > > (mask > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at > 0ca0 > > (mask > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at > 0600 > > (mask > > > 001f) pci 0000:00:1f.2: PME# supported from D3hot pci > > 0000:00:1f.2: PME# > > > disabled pci 0000:01:00.0: PME# supported from D0 D3hot > D3cold > > pci > > > 0000:01:00.0: PME# disabled pci 0000:01:00.1: PME# supported > from > > D0 > > > D3hot D3cold pci 0000:01:00.1: PME# disabled pci > 0000:0c:00.0: > > disabling > > > ASPM on pre-1.1 PCIe device. You can enable it with > > 'pcie_aspm=force' > > > pci 0000:00:1e.0: transparent bridge ACPI: PCI Root Bridge > [PCI1] > > > (0000:fe) ACPI: PCI Root Bridge [PCI2] (0000:ff) ACPI: PCI > > Interrupt > > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI > > Interrupt Link > > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt > > Link > > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt > > Link > > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt > > Link > > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: > PCI > > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > ACPI: > > PCI > > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, > > disabled. > > > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 > 14 > > 15) > > > xenbus_probe_backend_init bus registered ok > > xenbus_probe_frontend_init > > > bus registered ok xen_balloon: Initialising balloon driver > with > > page > > > order 0. vgaarb: device added: > > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none > vgaarb: > > loaded > > > SCSI subsystem initialized usbcore: registered new interface > > driver > > > usbfs usbcore: registered new interface driver hub usbcore: > > registered > > > new device driver usb PCI: Using ACPI for IRQ routing > NetLabel: > > > Initializing NetLabel: domain hash size = 128 NetLabel: > > protocols = > > > UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by > default > > > Switching to clocksource xen kstop/0 used greatest stack > depth: > > 6568 > > > bytes left kstop/1 used greatest stack depth: 6536 bytes left > > pnp: PnP > > > ACPI init ACPI: bus type pnp registered xen_allocate_pirq: > > returning irq > > > 8 for gsi 8 Already setup the GSI :8 xen_allocate_pirq: > returning > > irq 13 > > > for gsi 13 Already setup the GSI :13 pnp: PnP ACPI: found 13 > > devices > > > ACPI: ACPI bus type pnp unregistered system 00:07: ioport > range > > > 0x500-0x53f has been reserved system 00:07: ioport range > > 0x400-0x47f has > > > been reserved system 00:07: ioport range 0x800-0x81f has been > > reserved > > > system 00:07: ioport range 0x2f8-0x2ff has been reserved > system > > 00:07: > > > iomem range 0xfed1c000-0xfed8bffe could not be reserved > system > > 00:07: > > > iomem range 0xff000000-0xffffffff could not be reserved > system > > 00:07: > > > iomem range 0xfee00000-0xfeefffff has been reserved system > 00:07: > > iomem > > > range 0xfe900000-0xfe90001f has been reserved system 00:07: > iomem > > range > > > 0xfea00000-0xfea0001f has been reserved system 00:07: iomem > range > > > 0xfed1b000-0xfed1bfff has been reserved pci 0000:0c:00.0: BAR > 6: > > no > > > parent found for of device [0xffff0000-0xffffffff] pci > > 0000:00:01.0: PCI > > > bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: > > > 0x1000-0x1fff pci 0000:00:01.0: MEM window: > > 0xb1900000-0xb19fffff pci > > > 0000:00:01.0: PREFETCH window: disabled pci 0000:00:02.0: > PCI > > bridge, > > > secondary bus 0000:02 pci 0000:00:02.0: IO window: disabled > pci > > > 0000:00:02.0: MEM window: disabled pci 0000:00:02.0: > PREFETCH > > > window: disabled pci 0000:00:03.0: PCI bridge, secondary bus > > 0000:03 pci > > > 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM > > window: > > > disabled pci 0000:00:03.0: PREFETCH window: disabled pci > > 0000:00:04.0: > > > PCI bridge, secondary bus 0000:04 pci 0000:00:04.0: IO > window: > > > disabled pci 0000:00:04.0: MEM window: disabled pci > > 0000:00:04.0: > > > PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, > secondary > > bus > > > 0000:05 pci 0000:00:05.0: IO window: disabled pci > 0000:00:05.0: > > MEM > > > window: disabled pci 0000:00:05.0: PREFETCH window: > disabled > > pci > > > 0000:00:06.0: PCI bridge, secondary bus 0000:06 pci > 0000:00:06.0: > > IO > > > window: disabled pci 0000:00:06.0: MEM window: disabled pci > > > 0000:00:06.0: PREFETCH window: disabled pci 0000:00:07.0: > PCI > > bridge, > > > secondary bus 0000:07 pci 0000:00:07.0: IO window: disabled > pci > > > 0000:00:07.0: MEM window: disabled pci 0000:00:07.0: > PREFETCH > > > window: disabled pci 0000:00:08.0: PCI bridge, secondary bus > > 0000:08 pci > > > 0000:00:08.0: IO window: disabled pci 0000:00:08.0: MEM > > window: > > > disabled pci 0000:00:08.0: PREFETCH window: disabled pci > > 0000:00:09.0: > > > PCI bridge, secondary bus 0000:09 pci 0000:00:09.0: IO > window: > > > 0x3000-0x3fff pci 0000:00:09.0: MEM window: > > 0xb1b00000-0xb1cfffff pci > > > 0000:00:09.0: PREFETCH window: > > 0x000000b1d00000-0x000000b1efffff pci > > > 0000:00:0a.0: PCI bridge, secondary bus 0000:0a pci > 0000:00:0a.0: > > IO > > > window: disabled pci 0000:00:0a.0: MEM window: disabled pci > > > 0000:00:0a.0: PREFETCH window: disabled pci 0000:00:1c.0: > PCI > > bridge, > > > secondary bus 0000:0b pci 0000:00:1c.0: IO window: disabled > pci > > > 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: > PREFETCH > > > window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus > > 0000:0c pci > > > 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM > > window: > > > 0xb1000000-0xb18fffff pci 0000:00:1c.4: PREFETCH window: > > > 0x000000b0000000-0x000000b0ffffff pci 0000:00:1c.5: PCI > bridge, > > > secondary bus 0000:0d pci 0000:00:1c.5: IO window: disabled > pci > > > 0000:00:1c.5: MEM window: disabled pci 0000:00:1c.5: > PREFETCH > > > window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus > > 0000:0e pci > > > 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM > > window: > > > disabled pci 0000:00:1e.0: PREFETCH window: disabled pci > > 0000:00:01.0: > > > PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci 0000:00:02.0: > PCI > > INT A > > > -> GSI 29 (level, low) -> IRQ 29 pci 0000:00:03.0: PCI INT A > -> > > GSI 24 > > > (level, low) -> IRQ 24 pci 0000:00:04.0: PCI INT A -> GSI 25 > > (level, > > > low) -> IRQ 25 pci 0000:00:05.0: PCI INT A -> GSI 26 (level, > low) > > -> IRQ > > > 26 pci 0000:00:06.0: PCI INT A -> GSI 27 (level, low) -> IRQ > 27 > > pci > > > 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 pci > > > 0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 pci > > > 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci > > > 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 pci > > > 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > > xen_allocate_pirq: returning irq 16 for gsi 16 Already setup > the > > GSI :16 > > > pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci > > > 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 NET: > > Registered > > > protocol family 2 IP route cache hash table entries: 65536 > > (order: 7, > > > 524288 bytes) TCP established hash table entries: 262144 > (order: > > 10, > > > 4194304 bytes) TCP bind hash table entries: 65536 (order: 10, > > 4718592 > > > bytes) TCP: Hash tables configured (established 262144 bind > > 65536) TCP > > > reno registered NET: Registered protocol family 1 pci > > 0000:01:00.0: > > > Disabling L0s pci 0000:01:00.1: Disabling L0s Trying to > unpack > > rootfs > > > image as initramfs... Freeing initrd memory: 6474k freed > DMA-API: > > > preallocated 32768 debug entries DMA-API: debugging enabled > by > > kernel > > > config PCI-DMA: Using software bounce buffering for IO > (SWIOTLB) > > DMA: > > > Placing 64MB software IO TLB between ffff880007525000 - > > ffff88000b525000 > > > DMA: software IO TLB at phys 0x7525000 - 0xb525000 audit: > > initializing > > > netlink socket (disabled) type=2000 audit(1268750702.035:1): > > initialized > > > HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: > > Disk > > > quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order > 0, > > 4096 > > > bytes) msgmni has been set to 2970 cryptomgr_test used > greatest > > stack > > > depth: 5864 bytes left cryptomgr_test used greatest stack > depth: > > 5816 > > > bytes left alg: No test for stdrng (krng) Block layer SCSI > > generic (bsg) > > > driver version 0.4 loaded (major 252) io scheduler noop > > registered io > > > scheduler anticipatory registered io scheduler deadline > > registered io > > > scheduler cfq registered (default) pci_hotplug: PCI Hot Plug > PCI > > Core > > > version: 0.5 pciehp 0000:00:09.0:pcie04: HPC vendor_id 8086 > > device_id > > > 3410 ss_vid 0 ss_did 0 pciehp: PCI Express Hot Plug > Controller > > Driver > > > version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver > > version: 0.5 > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > pci-stub: invalid id string "" input: Sleep Button as > > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 > ACPI: > > Sleep > > > Button [SLPB] input: Power Button as > > > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power > Button > > [PWRF] > > > registering netback hpet_acpi_add: no address or irqs in _CRS > > > Non-volatile memory driver v1.3 Linux agpgart interface > v0.103 > > Serial: > > > 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: > ttyS1 > > at I/O > > > 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module > > loaded > > > input: Macintosh mouse button emulation as > > /devices/virtual/input/input2 > > > ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > > ahci > > > 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f > impl > > SATA mode > > > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum > part > > ccc > > > ems scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci > scsi4 : > > ahci > > > scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, > > connection > > > status changed irq 2996 ata2: SATA max UDMA/133 abar > > m2048@0xb1a00000 > > > port 0xb1a00180 irq 2996 ata3: SATA max UDMA/133 abar > > m2048@0xb1a00000 > > > port 0xb1a00200 irq 2996 ata4: SATA max UDMA/133 abar > > m2048@0xb1a00000 > > > port 0xb1a00280 irq 2996 ata5: SATA max UDMA/133 abar > > m2048@0xb1a00000 > > > port 0xb1a00300 irq 2996 ata6: SATA max UDMA/133 abar > > m2048@0xb1a00000 > > > port 0xb1a00380 irq 2996 Fixed MDIO Bus: probed ehci_hcd: USB > 2.0 > > > 'Enhanced' Host Controller (EHCI) Driver ehci_hcd > 0000:00:1a.7: > > PCI INT > > > C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: > EHCI > > Host > > > Controller ehci_hcd 0000:00:1a.7: new USB bus registered, > > assigned bus > > > number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd > > 0000:00:1a.7: irq > > > 18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7: USB 2.0 started, > > EHCI 1.00 > > > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > usb > > usb1: > > > New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb > > usb1: > > > Product: EHCI Host Controller usb usb1: Manufacturer: Linux > > 2.6.32.9 > > > ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: > > configuration #1 > > > chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: > 6 > > ports > > > detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, > low) > > -> IRQ > > > 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd > > 0000:00:1d.7: > > > new USB bus registered, assigned bus number 2 ehci_hcd > > 0000:00:1d.7: > > > debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb1a01000 > > ehci_hcd > > > 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB > device > > found, > > > idVendor=1d6b, idProduct=0002 usb usb2: New USB device > strings: > > Mfr=3, > > > Product=2, SerialNumber=1 usb usb2: Product: EHCI Host > Controller > > usb > > > usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd usb usb2: > > SerialNumber: > > > 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice > hub > > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected > ohci_hcd: > > USB 1.1 > > > 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal > Host > > > Controller Interface driver xen_allocate_pirq: returning irq > 16 > > for gsi > > > 16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0: PCI INT A > -> > > GSI 16 > > > (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: UHCI Host > > Controller > > > uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus > > number 3 > > > uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020e0 usb usb3: > New > > USB > > > device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB > > device > > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: > UHCI > > Host > > > Controller usb usb3: Manufacturer: Linux 2.6.32.9 uhci_hcd > usb > > usb3: > > > SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen > from > > 1 > > > choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports > detected > > uhci_hcd > > > 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd > > > 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new > USB > > bus > > > registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq > 21, > > io base > > > 0x000020c0 usb usb4: New USB device found, idVendor=1d6b, > > idProduct=0001 > > > usb usb4: New USB device strings: Mfr=3, Product=2, > > SerialNumber=1 usb > > > usb4: Product: UHCI Host Controller usb usb4: Manufacturer: > Linux > > > 2.6.32.9 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb > usb4: > > > configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub > found > > hub > > > 4-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 19 > for > > gsi 19 > > > Already setup the GSI :19 uhci_hcd 0000:00:1a.2: PCI INT D -> > GSI > > 19 > > > (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: UHCI Host > > Controller > > > uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus > > number 5 > > > uhci_hcd 0000:00:1a.2: irq 19, io base 0x000020a0 usb usb5: > New > > USB > > > device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB > > device > > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: > UHCI > > Host > > > Controller usb usb5: Manufacturer: Linux 2.6.32.9 uhci_hcd > usb > > usb5: > > > SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen > from > > 1 > > > choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports > detected > > > xen_allocate_pirq: returning irq 23 for gsi 23 Already setup > the > > GSI :23 > > > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> > IRQ 23 > > > uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd > > 0000:00:1d.0: new > > > USB bus registered, assigned bus number 6 uhci_hcd > 0000:00:1d.0: > > irq 23, > > > io base 0x00002080 usb usb6: New USB device found, > idVendor=1d6b, > > > idProduct=0001 usb usb6: New USB device strings: Mfr=3, > > Product=2, > > > SerialNumber=1 usb usb6: Product: UHCI Host Controller usb > usb6: > > > Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb6: SerialNumber: > > > 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice > hub > > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected > > xen_allocate_pirq: > > > returning irq 19 for gsi 19 Already setup the GSI :19 > uhci_hcd > > > 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd > > > 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new > USB > > bus > > > registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq > 19, > > io base > > > 0x00002060 usb usb7: New USB device found, idVendor=1d6b, > > idProduct=0001 > > > usb usb7: New USB device strings: Mfr=3, Product=2, > > SerialNumber=1 usb > > > usb7: Product: UHCI Host Controller usb usb7: Manufacturer: > Linux > > > 2.6.32.9 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb > usb7: > > > configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub > found > > hub > > > 7-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 18 > for > > gsi 18 > > > Already setup the GSI :18 uhci_hcd 0000:00:1d.2: PCI INT C -> > GSI > > 18 > > > (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI Host > > Controller > > > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus > > number 8 > > > uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb usb8: > New > > USB > > > device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB > > device > > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: > UHCI > > Host > > > Controller usb usb8: Manufacturer: Linux 2.6.32.9 uhci_hcd > usb > > usb8: > > > SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen > from > > 1 > > > choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports > detected > > PNP: No > > > PS/2 controller found. Probing ports directly. i8042.c: No > > controller > > > found. mice: PS/2 mouse device common for all mice rtc_cmos > > 00:03: RTC > > > can wake from S4 rtc_cmos 00:03: rtc core: registered > rtc_cmos as > > rtc0 > > > rtc0: alarms up to one month, y3k, 114 bytes nvram > device-mapper: > > > uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl > > (2009-04-01) > > > initialised: [16][17]dm-devel@redhat.com cpuidle: using > governor > > ladder > > > cpuidle: using governor menu usbcore: registered new > interface > > driver > > > hiddev usbcore: registered new interface driver usbhid > usbhid: > > v2.6:USB > > > HID core driver nf_conntrack version 0.5.0 (16384 buckets, > 65536 > > max) > > > CONFIG_NF_CT_ACCT is deprecated and will be removed soon. > Please > > use > > > nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack > module > > option > > > or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. > > ip_tables: (C) > > > 2000-2006 Netfilter Core Team TCP cubic registered > Initializing > > XFRM > > > netlink socket NET: Registered protocol family 17 registered > > taskstats > > > version 1 No TPM chip found, activating TPM-bypass! Magic > > number: > > > 2:902:788 pci 0000:00:16.6: hash matches rtc_cmos 00:03: > setting > > system > > > clock to 2010-03-16 14:45:05 UTC (1268750705) Initalizing > network > > drop > > > monitor service ata2: SATA link down (SStatus 0 SControl 300) > > ata4: SATA > > > link down (SStatus 0 SControl 300) ata6: SATA link down > (SStatus > > 0 > > > SControl 300) ata5: SATA link down (SStatus 0 SControl 300) > ata3: > > SATA > > > link down (SStatus 0 SControl 300) usb 7-1: new low speed USB > > device > > > using uhci_hcd and address 2 > > > ====================================================== [ > INFO: > > > SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] 2.6.32.9 > #1 > > > ------------------------------------------------------ > khubd/100 > > > [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: > > (&retval->lock){......}, > > > at: [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 and this > task > > is > > > already holding: (&uhci->lock){..-...}, at: > [<ffffffff8137aedd>] > > > uhci_urb_enqueue+0x46/0x7e3 which would create a new lock > > dependency: > > > (&uhci->lock){..-...} -> (&retval->lock){......} but this > new > > > dependency connects a SOFTIRQ-irq-safe lock: > > (&uhci->lock){..-...} ... > > > which became SOFTIRQ-irq-safe at: [<ffffffff8108ea6d>] > > > __lock_acquire+0x2d2/0xc07 [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 > > > [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 > > > [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c > > > [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a > > > [<ffffffff8135a479>] rh_timer_func+0xe/0x10 > > [<ffffffff810693bd>] > > > run_timer_softirq+0x1a6/0x257 [<ffffffff810627e4>] > > > __do_softirq+0xe6/0x1bc [<ffffffff81013fac>] > > call_softirq+0x1c/0x30 > > > [<ffffffff81015794>] do_softirq+0x4b/0xa7 > [<ffffffff81062229>] > > > irq_exit+0x4a/0x89 [<ffffffff812bf9d9>] > > > xen_evtchn_do_upcall+0x156/0x172 [<ffffffff81013ffe>] > > > xen_do_hypervisor_callback+0x1e/0x30 to a SOFTIRQ-irq-unsafe > > lock: > > > (purge_lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: > ... > > > [<ffffffff8108eadc>] __lock_acquire+0x341/0xc07 > > [<ffffffff8108f46f>] > > > lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] > > _spin_lock+0x36/0x6b > > > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a > > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > > [<ffffffff8100e58c>] > > > xen_alloc_ptpage+0x51/0x82 [<ffffffff8100e5d0>] > > > xen_alloc_pud+0x13/0x15 [<ffffffff810fe3cf>] > > __pud_alloc+0x79/0xb3 > > > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 > > > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 > > [<ffffffff8110c197>] > > > map_vm_area+0x34/0x47 [<ffffffff8110c2cf>] > > > __vmalloc_area_node+0x125/0x14d [<ffffffff8110c379>] > > > __vmalloc_node+0x82/0x91 [<ffffffff8110c4e9>] > > __vmalloc+0x20/0x22 > > > [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe > > > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d > > [<ffffffff819c1d99>] > > > start_kernel+0x3de/0x426 [<ffffffff819c12c3>] > > > x86_64_start_reservations+0xae/0xb2 [<ffffffff819c4d5d>] > > > xen_start_kernel+0x4b9/0x4c0 other info that might help us > debug > > this: > > > 2 locks held by khubd/100: #0: > (usb_address0_mutex){+.+...}, > > at: > > > [<ffffffff81354f5f>] hub_port_init+0x81/0x7e4 #1: > > > (&uhci->lock){..-...}, at: [<ffffffff8137aedd>] > > > uhci_urb_enqueue+0x46/0x7e3 the dependencies between > > SOFTIRQ-irq-safe > > > lock and the holding lock: -> (&uhci->lock){..-...} ops: 0 { > > > IN-SOFTIRQ-W at: > [<ffffffff8108ea6d>] > > > __lock_acquire+0x2d2/0xc07 > > [<ffffffff8108f46f>] > > > lock_acquire+0xcd/0xf2 > > [<ffffffff81485526>] > > > _spin_lock_irqsave+0x4f/0x86 > > > [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c > > > [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a > > > [<ffffffff8135a479>] rh_timer_func+0xe/0x10 > > > [<ffffffff810693bd>] run_timer_softirq+0x1a6/0x257 > > > [<ffffffff810627e4>] __do_softirq+0xe6/0x1bc > > > [<ffffffff81013fac>] call_softirq+0x1c/0x30 > > > [<ffffffff81015794>] do_softirq+0x4b/0xa7 > > > [<ffffffff81062229>] irq_exit+0x4a/0x89 > > > [<ffffffff812bf9d9>] xen_evtchn_do_upcall+0x156/0x172 > > > [<ffffffff81013ffe>] > xen_do_hypervisor_callback+0x1e/0x30 > > > INITIAL USE at: [<ffffffff8108eb29>] > > > __lock_acquire+0x38e/0xc07 > > [<ffffffff8108f46f>] > > > lock_acquire+0xcd/0xf2 > > [<ffffffff81485526>] > > > _spin_lock_irqsave+0x4f/0x86 > > [<ffffffff8137c3d7>] > > > uhci_hub_control+0x74/0x401 > > [<ffffffff8135bdac>] > > > usb_hcd_submit_urb+0x7a6/0xa1e > > > [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1 > > > [<ffffffff8135d51f>] usb_start_wait_urb+0x54/0x1b1 > > > [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113 > > > [<ffffffff81358922>] hub_probe+0x37c/0xfaa > > > [<ffffffff81360a35>] usb_probe_interface+0x15a/0x1f7 > > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > > [<ffffffff813077fa>] __device_attach+0x28/0x31 > > > [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 > > > [<ffffffff81307891>] device_attach+0x65/0x7c > > > [<ffffffff8130667e>] bus_probe_device+0x27/0x3e > > > [<ffffffff813045b3>] device_add+0x3ab/0x57d > > > [<ffffffff8135e3ca>] usb_set_configuration+0x5b9/0x677 > > > [<ffffffff81367b85>] generic_probe+0x67/0xae > > > [<ffffffff813607b1>] usb_probe_device+0x7f/0x87 > > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > > [<ffffffff813077fa>] __device_attach+0x28/0x31 > > > [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 > > > [<ffffffff81307891>] device_attach+0x65/0x7c > > > [<ffffffff8130667e>] bus_probe_device+0x27/0x3e > > > [<ffffffff813045b3>] device_add+0x3ab/0x57d > > > [<ffffffff8135616e>] usb_new_device+0x154/0x201 > > > [<ffffffff8135b42e>] usb_add_hcd+0x4c5/0x69d > > > [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 > > > [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b > > > [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 > > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > > [<ffffffff813077ae>] __driver_attach+0x59/0x7d > > > [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 > > > [<ffffffff813073fd>] driver_attach+0x21/0x23 > > > [<ffffffff81306487>] bus_add_driver+0xe1/0x26b > > > [<ffffffff81307ad5>] driver_register+0xa3/0x11a > > > [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 > > > [<ffffffff819f403b>] uhci_hcd_init+0x88/0xc1 > > > [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > > [<ffffffff819c1961>] kernel_init+0x172/0x1cc > > > [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key at: > > > [<ffffffff8268de38>] __key.33456+0x0/0x8 ... acquired at: > > > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 > > [<ffffffff8108f128>] > > > __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>] > > > lock_acquire+0xcd/0xf2 [<ffffffff81485526>] > > > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] > > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>] > > > uhci_alloc_qh+0x33/0x146 [<ffffffff8137af66>] > > > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>] > > > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>] > > > usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] > > > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] > > > usb_control_msg+0xee/0x113 [<ffffffff813551fb>] > > > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] > > > hub_events+0x91e/0x11a2 [<ffffffff81358432>] > > hub_thread+0x25/0x199 > > > [<ffffffff8107b8fd>] kthread+0x6e/0x76 > [<ffffffff81013eaa>] > > > child_rip+0xa/0x20 the dependencies between the lock to be > > acquired > > > and SOFTIRQ-irq-unsafe lock: -> (purge_lock){+.+...} ops: 0 > { > > > HARDIRQ-ON-W at: > [<ffffffff8108eaba>] > > > __lock_acquire+0x31f/0xc07 > > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > > > [<ffffffff814853bc>] _spin_lock+0x36/0x6b > > > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a > > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > > > [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 > > > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 > > > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > > > [<ffffffff8110bf76>] > vmap_page_range_noflush+0x9a/0x264 > > > [<ffffffff8110c161>] > vmap_page_range+0xe/0x10 > > > [<ffffffff8110c197>] map_vm_area+0x34/0x47 > > > [<ffffffff8110c2cf>] > > __vmalloc_area_node+0x125/0x14d > > > [<ffffffff8110c379>] > __vmalloc_node+0x82/0x91 > > > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 > > > [<ffffffff819dfef1>] > > alloc_large_system_hash+0x150/0x1fe > > > [<ffffffff819e28c5>] > > vfs_caches_init+0xa9/0x11d > > > [<ffffffff819c1d99>] > > start_kernel+0x3de/0x426 > > > [<ffffffff819c12c3>] > > > x86_64_start_reservations+0xae/0xb2 > > > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 > > SOFTIRQ-ON-W at: > > > [<ffffffff8108eadc>] > > __lock_acquire+0x341/0xc07 > > > [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 > > > [<ffffffff814853bc>] > _spin_lock+0x36/0x6b > > > [<ffffffff8110aa20>] > > > __purge_vmap_area_lazy+0x54/0x18a > > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > > > [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 > > > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 > > > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > > > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 > > > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 > > > [<ffffffff8110c197>] map_vm_area+0x34/0x47 > > > [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d > > > [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 > > > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 > > > [<ffffffff819dfef1>] > alloc_large_system_hash+0x150/0x1fe > > > [<ffffffff819e28c5>] > vfs_caches_init+0xa9/0x11d > > > [<ffffffff819c1d99>] > start_kernel+0x3de/0x426 > > > [<ffffffff819c12c3>] > > > x86_64_start_reservations+0xae/0xb2 > > > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 INITIAL > USE > > at: > > > [<ffffffff8108eb29>] > > __lock_acquire+0x38e/0xc07 > > > [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 > > > [<ffffffff814853bc>] _spin_lock+0x36/0x6b > > > [<ffffffff8110aa20>] > > __purge_vmap_area_lazy+0x54/0x18a > > > [<ffffffff8110c82f>] > > vm_unmap_aliases+0x167/0x176 > > > [<ffffffff8100e58c>] > > xen_alloc_ptpage+0x51/0x82 > > > [<ffffffff8100e5d0>] > > xen_alloc_pud+0x13/0x15 > > > [<ffffffff810fe3cf>] > __pud_alloc+0x79/0xb3 > > > [<ffffffff8110bf76>] > > vmap_page_range_noflush+0x9a/0x264 > > > [<ffffffff8110c161>] > > vmap_page_range+0xe/0x10 > > > [<ffffffff8110c197>] > map_vm_area+0x34/0x47 > > > [<ffffffff8110c2cf>] > > __vmalloc_area_node+0x125/0x14d > > > [<ffffffff8110c379>] > > __vmalloc_node+0x82/0x91 > > > [<ffffffff8110c4e9>] > __vmalloc+0x20/0x22 > > > [<ffffffff819dfef1>] > > > alloc_large_system_hash+0x150/0x1fe > > > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d > > > [<ffffffff819c1d99>] start_kernel+0x3de/0x426 > > > [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2 > > > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 > } > > ... > > > key at: [<ffffffff81741ef8>] purge_lock.27226+0x18/0x40 > > ... > > > acquired at: [<ffffffff8108f20c>] > __lock_acquire+0xa71/0xc07 > > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > > [<ffffffff814853bc>] > > > _spin_lock+0x36/0x6b [<ffffffff8110aa20>] > > > __purge_vmap_area_lazy+0x54/0x18a [<ffffffff8110c82f>] > > > vm_unmap_aliases+0x167/0x176 [<ffffffff8100d7ca>] > > > xen_create_contiguous_region+0x51/0x106 > [<ffffffff81250d84>] > > > xen_swiotlb_alloc_coherent+0x62/0xa6 [<ffffffff8111188c>] > > > dma_pool_alloc+0x136/0x2a8 [<ffffffff81370efe>] > > > ehci_qh_alloc+0x44/0x107 [<ffffffff81373f5d>] > > > ehci_pci_setup+0x22a/0x9c1 [<ffffffff8135b18e>] > > > usb_add_hcd+0x225/0x69d [<ffffffff8136907b>] > > > usb_hcd_pci_probe+0x270/0x3b1 [<ffffffff8125a8ad>] > > > local_pci_probe+0x17/0x1b [<ffffffff8125b4c4>] > > > pci_device_probe+0xcb/0xf7 [<ffffffff81307635>] > > > driver_probe_device+0xf8/0x218 [<ffffffff813077ae>] > > > __driver_attach+0x59/0x7d [<ffffffff813069e1>] > > > bus_for_each_dev+0x54/0x83 [<ffffffff813073fd>] > > > driver_attach+0x21/0x23 [<ffffffff81306487>] > > > bus_add_driver+0xe1/0x26b [<ffffffff81307ad5>] > > > driver_register+0xa3/0x11a [<ffffffff8125b71b>] > > > __pci_register_driver+0x65/0xc2 [<ffffffff819f3ee0>] > > > ehci_hcd_init+0x7f/0xc0 [<ffffffff8100a07e>] > > > do_one_initcall+0x73/0x18b [<ffffffff819c1961>] > > > kernel_init+0x172/0x1cc [<ffffffff81013eaa>] > > child_rip+0xa/0x20 -> > > > (&retval->lock){......} ops: 0 { INITIAL USE at: > > > [<ffffffff8108eb29>] __lock_acquire+0x38e/0xc07 > > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > > > [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 > > > [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 > > > [<ffffffff81370efe>] ehci_qh_alloc+0x44/0x107 > > > [<ffffffff81373f5d>] ehci_pci_setup+0x22a/0x9c1 > > > [<ffffffff8135b18e>] usb_add_hcd+0x225/0x69d > > > [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 > > > [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b > > > [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 > > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > > [<ffffffff813077ae>] __driver_attach+0x59/0x7d > > > [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 > > > [<ffffffff813073fd>] driver_attach+0x21/0x23 > > > [<ffffffff81306487>] bus_add_driver+0xe1/0x26b > > > [<ffffffff81307ad5>] driver_register+0xa3/0x11a > > > [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 > > > [<ffffffff819f3ee0>] ehci_hcd_init+0x7f/0xc0 > > > [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > > [<ffffffff819c1961>] kernel_init+0x172/0x1cc > > > [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key at: > > > [<ffffffff824dc3c4>] __key.24188+0x0/0x1c ... acquired at: > > > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 > > [<ffffffff8108f128>] > > > __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>] > > > lock_acquire+0xcd/0xf2 [<ffffffff81485526>] > > > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] > > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>] > > > uhci_alloc_qh+0x33/0x146 [<ffffffff8137af66>] > > > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>] > > > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>] > > > usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] > > > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] > > > usb_control_msg+0xee/0x113 [<ffffffff813551fb>] > > > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] > > > hub_events+0x91e/0x11a2 [<ffffffff81358432>] > > hub_thread+0x25/0x199 > > > [<ffffffff8107b8fd>] kthread+0x6e/0x76 > [<ffffffff81013eaa>] > > > child_rip+0xa/0x20 stack backtrace: Pid: 100, comm: khubd > Not > > tainted > > > 2.6.32.9 #1 Call Trace: [<ffffffff8108cd50>] > > check_usage+0x331/0x345 > > > [<ffffffff81032d79>] ? pvclock_clocksource_read+0x47/0x80 > > > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 > > [<ffffffff8108f128>] > > > __lock_acquire+0x98d/0xc07 [<ffffffff8111008c>] ? > > > sys_swapoff+0x870/0x9d0 [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 > > > [<ffffffff8111178c>] ? dma_pool_alloc+0x36/0x2a8 > > [<ffffffff81485526>] > > > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] ? > > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8111178c>] > > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8111a986>] ? > > init_object+0x73/0x7b > > > [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf > > > [<ffffffff8100f452>] ? check_events+0x12/0x20 > > [<ffffffff8137aa7b>] > > > uhci_alloc_qh+0x33/0x146 [<ffffffff8111dda9>] ? > > > kmem_cache_alloc+0xd9/0x150 [<ffffffff8137af66>] > > > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135a29c>] ? > > > dma_map_single_attrs+0xb4/0xc6 [<ffffffff8135be92>] > > > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8100ed81>] ? > > > xen_force_evtchn_callback+0xd/0xf [<ffffffff8100ed81>] ? > > > xen_force_evtchn_callback+0xd/0xf [<ffffffff8100f452>] ? > > > check_events+0x12/0x20 [<ffffffff8108b9ea>] ? > > > lockdep_init_map+0x9f/0x115 [<ffffffff8135c6b2>] > > > usb_submit_urb+0x297/0x2f1 [<ffffffff8107beb6>] ? > > > __init_waitqueue_head+0x3a/0x4c [<ffffffff8135d51f>] > > > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8100f452>] ? > > > check_events+0x12/0x20 [<ffffffff8135c939>] ? > > usb_alloc_urb+0x21/0x4b > > > [<ffffffff8135c907>] ? usb_init_urb+0x2a/0x3b > > [<ffffffff8135d8a1>] > > > usb_control_msg+0xee/0x113 [<ffffffff8111c5ef>] ? > > > kmem_cache_alloc_notrace+0xe8/0x111 [<ffffffff8135517a>] ? > > > hub_port_init+0x29c/0x7e4 [<ffffffff813551fb>] > > > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] > > hub_events+0x91e/0x11a2 > > > [<ffffffff8135840d>] ? hub_thread+0x0/0x199 > > [<ffffffff81358432>] > > > hub_thread+0x25/0x199 [<ffffffff8107bb4f>] ? > > > autoremove_wake_function+0x0/0x3d [<ffffffff8107b8fd>] > > > kthread+0x6e/0x76 [<ffffffff81013eaa>] child_rip+0xa/0x20 > > > [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > > > [<ffffffff81013810>] ? restore_args+0x0/0x30 > > [<ffffffff8107b9f2>] ? > > > kthreadd+0xed/0x10f [<ffffffff81013ea0>] ? > child_rip+0x0/0x20 > > ata1: > > > SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: > ATA-8: > > Hitachi > > > HDT721025SLA380, STBOA3AA, max UDMA/133 ata1.00: 488397168 > > sectors, > > > multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for > > UDMA/133 > > > scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 > STBO > > PQ: 0 > > > ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: > (250 > > GB/232 > > > GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: > > [sda] > > > Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 > 00 sd > > > 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't > > > support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached > > SCSI disk > > > Freeing unused kernel memory: 3396k freed Write protecting > the > > kernel > > > read-only data: 6988k Red Hat nash version 5.1.19.6 starting > > Mounting > > > proc filesystem Mounting sysfs filesystem Creating /dev > Creating > > initial > > > device nodes Setting up hotplug. usb 7-1: New USB device > found, > > > idVendor=0458, idProduct=0007 usb 7-1: New USB device > strings: > > Mfr=2, > > > Product=1, SerialNumber=0 usb 7-1: Product: Optical Mouse usb > > 7-1: > > > Manufacturer: KYE usb 7-1: configuration #1 chosen from 1 > choice > > input: > > > KYE Optical Mouse as > > > > /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input3 > > > generic-usb 0003:0458:0007.0001: input,hidraw0: USB HID v1.10 > > Mouse [KYE > > > Optical Mouse] on usb-0000:00:1d.1-1/input0 Creating block > device > > nodes. > > > Loading aacraid.ko module Adaptec aacraid driver > 1.1-5[2461]-ms > > Scanning > > > and configuring dmraid supported devices Scanning logical > volumes > > > Reading all physical volumes. This may take a while... > > Activating > > > logical volumes Volume group "VolGroup01" not found Trying > to > > resume > > > from /dev/VolGroup01/LogVol01 Unable to access resume device > > > (/dev/VolGroup01/LogVol01) Creating root device. Mounting > root > > > filesystem. mount: could not find filesystem '/dev/root' > Setting > > up > > > other filesystems. Setting up new root fs setuproot: moving > /dev > > failed: > > > No such file or directory no fstab.sys, mounting internal > > defaults > > > setuproot: error mounting /proc: No such file or directory > > setuproot: > > > error mounting /sys: No such file or directory Switching to > new > > root and > > > running init. unmounting old /dev unmounting old /proc > unmounting > > old > > > /sys switchroot: mount failed: No such file or directory init > > used > > > greatest stack depth: 4088 bytes left Kernel panic - not > syncing: > > > Attempted to kill init! Pid: 1, comm: init Not tainted > 2.6.32.9 > > #1 Call > > > Trace: [<ffffffff8105b73f>] panic+0xa5/0x167 > > [<ffffffff8100ed81>] ? > > > xen_force_evtchn_callback+0xd/0xf [<ffffffff8105f2ab>] ? > > > do_exit+0x38a/0x701 [<ffffffff8100f43f>] ? > > > xen_restore_fl_direct_end+0x0/0x1 [<ffffffff8108f81b>] ? > > > lock_release+0x179/0x184 [<ffffffff8108ca1d>] ? > > > trace_hardirqs_on+0xd/0xf [<ffffffff81484fcf>] ? > > > _write_unlock_irq+0x37/0x3c [<ffffffff8105ef9f>] > > do_exit+0x7e/0x701 > > > [<ffffffff8105f6be>] sys_exit_group+0x0/0x1b > > [<ffffffff8105f6d5>] > > > sys_exit_group+0x17/0x1b [<ffffffff81012d72>] > > > system_call_fastpath+0x16/0x1b > > > > > > References > > > > > > Visible links > > > 1. mailto:[18]pasik@iki.fi > > > 2. mailto:[19]pasik@iki.fi > > > 3. > > [20]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 4. > > [21] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 5. mailto:[22]pasik@iki.fi > > > 6. > > [23]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 7. > > [24] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 8. mailto:[25]pasik@iki.fi > > > 9. mailto:[26]pasik@iki.fi > > > 10. > > [27]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 11. > > [28] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 12. mailto:[29]pasik@iki.fi > > > 13. > > [30]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 14. > > [31] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 15. mailto:[32]pasik@iki.fi > > > 16. mailto:[33]dm-devel@redhat.com > > > > References > > > > Visible links > > 1. mailto:pasik@iki.fi > > 2. mailto:pasik@iki.fi > > 3. mailto:pasik@iki.fi > > 4. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 5. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 6. mailto:pasik@iki.fi > > 7. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 8. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 9. mailto:pasik@iki.fi > > 10. mailto:pasik@iki.fi > > 11. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 12. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 13. mailto:pasik@iki.fi > > 14. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 15. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 16. mailto:pasik@iki.fi > > 17. mailto:dm-devel@redhat.com > > 18. mailto:pasik@iki.fi > > 19. mailto:pasik@iki.fi > > 20. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 21. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 22. mailto:pasik@iki.fi > > 23. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 24. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 25. mailto:pasik@iki.fi > > 26. mailto:pasik@iki.fi > > 27. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 28. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 29. mailto:pasik@iki.fi > > 30. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 31. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 32. mailto:pasik@iki.fi > > 33. mailto:dm-devel@redhat.com > [-- Attachment #1.2: Type: text/html, Size: 113507 bytes --] [-- Attachment #2: Type: text/plain, Size: 137 bytes --] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-17 22:20 ` kishore kumar @ 2010-03-18 0:34 ` kishore kumar 2010-03-18 16:15 ` Pasi Kärkkäinen 1 sibling, 0 replies; 32+ messages in thread From: kishore kumar @ 2010-03-18 0:34 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users [-- Attachment #1.1: Type: text/plain, Size: 84293 bytes --] Attached is the newly captured file after compiling the new pvops dom 0 kernel 2.6.32.10 . Machine still does not boot up. Can any one let me know please?? On Wed, Mar 17, 2010 at 3:20 PM, kishore kumar <bodkekumar@gmail.com> wrote: > Here is the output of df -h and cat /etc/fstab of my machine. > > Please let me know your thoughts. > > [root@localhost kishore]# df -h > > Filesystem Size Used Avail Use% Mounted on > > /dev/mapper/VolGroup01-LogVol00 > > 223G 29G 182G 14% / > > /dev/sda1 99M 81M 13M 87% /boot > > tmpfs 757M 0 757M 0% /dev/shm > > [root@localhost kishore]# cat /etc/fstab > > /dev/VolGroup01/LogVol00 / ext3 defaults 1 1 > > LABEL=/boot /boot ext3 defaults 1 2 > > tmpfs /dev/shm tmpfs defaults 0 0 > > devpts /dev/pts devpts gid=5,mode=620 0 0 > > sysfs /sys sysfs defaults 0 0 > > proc /proc proc defaults 0 0 > > /dev/VolGroup01/LogVol01 swap swap defaults 0 0 > > [root@localhost kishore]# > > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote: > >> On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore kumar wrote: >> > I am not sure. Can you please let me know how to check this? any >> command >> > ?? >> >> well simple "df -h" will show it. and also "cat /etc/fstab". >> You can also check it from your grub configuration.. from the working >> baremetal (non-Xen) entry. >> >> -- Pasi >> >> > >> > On Tue, Mar 16, 2010 at 3:29 PM, Pasi Kärkkäinen <[1]pasik@iki.fi> >> wrote: >> > >> > On Tue, Mar 16, 2010 at 03:22:50PM -0700, kishore kumar wrote: >> > > attached is the log captured in with the word document . >> > > >> > >> > Scanning logical volumes >> > Reading all physical volumes. This may take a while... >> > Activating logical volumes >> > Volume group "VolGroup01" not found >> > Trying to resume from /dev/VolGroup01/LogVol01 >> > Unable to access resume device (/dev/VolGroup01/LogVol01) >> > Creating root device. >> > Mounting root filesystem. >> > mount: could not find filesystem '/dev/root' >> > Setting up other filesystems. >> > Setting up new root fs >> > setuproot: moving /dev failed: No such file or directory >> > no fstab.sys, mounting internal defaults >> > setuproot: error mounting /proc: No such file or directory >> > setuproot: error mounting /sys: No such file or directory >> > Switching to new root and running init. >> > unmounting old /dev >> > unmounting old /proc >> > unmounting old /sys >> > switchroot: mount failed: No such file or directory >> > init used greatest stack depth: 4088 bytes left >> > Kernel panic - not syncing: Attempted to kill init! >> > >> > So it seems it gets all the way to executing the initrd image, >> > which then fails to mount the root fs. >> > >> > Earlier in the log: >> > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> > ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA, max UDMA/133 >> > ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA >> > ata1.00: configured for UDMA/133 >> > scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: >> 0 >> > ANSI: 5 >> > sd 0:0:0:0: Attached scsi generic sg0 type 0 >> > sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 >> GiB) >> > sd 0:0:0:0: [sda] Write Protect is off >> > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >> > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, >> doesn't >> > support DPO or FUA >> > sda: sda1 sda2 >> > sd 0:0:0:0: [sda] Attached SCSI disk >> > >> > so /dev/sda was detected. Is your root lvm volume on /dev/sda ? >> > Is /dev/VolGroup01/LogVol01 really your root fs? >> > >> > -- Pasi >> > >> > > >> > > >> > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi Kärkkäinen >> > <[1][2]pasik@iki.fi> wrote: >> > > >> > > On Tue, Mar 16, 2010 at 02:56:06PM -0700, kishore kumar >> wrote: >> > > > Please find the attached log file after fixing the dom >> 0 >> > kernel cmd >> > > line >> > > > as below >> > > > >> > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 >> > earlyprintk=xen >> > > nomodeset >> > > > >> > > >> > > There's something wrong with the log, the dom0 kernel parts >> are >> > all on >> > > one line.. >> > > It's really difficult to read it. >> > > >> > > -- Pasi >> > > >> > > > Thanks >> > > > >> > > > >> > > > On Tue, Mar 16, 2010 at 2:29 PM, Pasi Kärkkäinen >> > > <[1][2][3]pasik@iki.fi> wrote: >> > > > >> > > > On Tue, Mar 16, 2010 at 02:16:22PM -0700, kishore >> kumar >> > wrote: >> > > > > I did below steps. >> > > > > >> > > > > >> > > > > I pulled DOM 0 kernel from >> > > > > git clone >> > > > >> > > >> > git://[1][2][3][4] >> git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > > > > linux-2.6-xen >> > > > > >> > > > > cd linux-2.6-xen >> > > > > >> > > > > make clean >> > > > > >> > > > > cp -a .config .config-old >> > > > > >> > > > > wget -O .config >> > > > > >> > > > >> > > >> > [2][3][4][5] >> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > > > > >> > > > > make oldconfig >> > > > > >> > > > > make bzImage >> > > > > >> > > > > make modules >> > > > > >> > > > > make modules_install >> > > > > >> > > > > cp -a .config /boot/config-2.6.32.9 >> > > > > >> > > > > cp -a System.map /boot/System.map-2.6.32.9 >> > > > > >> > > > > cp -a arch/x86/boot/bzImage >> /boot/vmlinuz-2.6.32.9 >> > > > > >> > > > > and modified the grub.conf as below >> > > > > >> > > > > >> > > > > Root(hd0,0) >> > > > > >> > > > > kernel /xen.gz console=vga,com1 com1=115200,8n1 >> > msi=1 >> > > iommu=1 >> > > > > >> > > > > module /vmlinuz-2.6.32.9 ro >> > root=/dev/VolGroup01/LogVo100 >> > > rhgb >> > > > quiet >> > > > > >> > > > > module /initrd-2.6.32.9.img >> > > > > >> > > > > >> > > > > and rebooted the machine. Then It booted with >> some >> > xen >> > > messages >> > > > and >> > > > > stopped. Those were the messages captured from >> > serial >> > > console. >> > > > > >> > > > > Please let me know if I did something wrong >> here. >> > > > > >> > > > >> > > > Please fix the kernel cmdline based on my earlier >> email, >> > and >> > > capture and >> > > > post the >> > > > serial console log again! >> > > > >> > > > -- Pasi >> > > > > >> > > > > >> > > > > On Tue, Mar 16, 2010 at 1:20 PM, Pasi Kärkkäinen >> > > > <[3][4][5][6]pasik@iki.fi> wrote: >> > > > > >> > > > > On Tue, Mar 16, 2010 at 01:16:28PM -0700, >> Jeremy >> > > Fitzhardinge >> > > > wrote: >> > > > > > On 03/16/2010 12:48 PM, Pasi Kärkkäinen >> wrote: >> > > > > >> On Tue, Mar 16, 2010 at 09:43:44PM +0200, >> Pasi >> > > Kärkkäinen >> > > > wrote: >> > > > > >> >> > > > > >>> On Tue, Mar 16, 2010 at 10:32:17AM -0700, >> > kishore >> > > kumar >> > > > wrote: >> > > > > >>> >> > > > > >>>> Attached is the output captured from >> > serial >> > > console. >> > > > > >>>> >> > > > > >>>> Machine does not boot after compiling >> xen >> > 3.4.3 >> > > with >> > > > pv_ops dom >> > > > > 0 kernel. >> > > > > >>>> >> > > > > >>>> Please let me know what is going >> wrong >> > here. >> > > > > >>>> >> > > > > >>>> >> > > > > >>> Ok this looks like a bug that is already >> being >> > sorted >> > > out on >> > > > > xen-devel mailinglist. >> > > > > >>> I added CC to xen-devel. >> > > > > >>> >> > > > > >>> >> > > > > >> >> > > > > > >> > > > > > Those messages are not a problem in >> themselves, >> > but the >> > > related >> > > > > problem >> > > > > > is believed to be fixed in current >> > xen/stable-2.6.32.x. >> > > It >> > > > looks like >> > > > > > the output stops there because the Xen >> console >> > isn't set >> > > up >> > > > properly >> > > > > for >> > > > > > some reason. >> > > > > > >> > > > > >> > > > > Yeah, remove "rhgb quiet" from the options.. >> the >> > dom0 >> > > kernel >> > > > cmdline >> > > > > should be like this: >> > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 >> > > earlyprintk=xen >> > > > nomodeset >> > > > > -- Pasi >> > > > > >> > > > > References >> > > > > >> > > > > Visible links >> > > > > 1. >> > > >> > [5][6][7] >> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > > > > 2. >> > > > >> > > >> > [6][7][8] >> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > > > > 3. mailto:[7][8][9]pasik@iki.fi >> > > > >> > > > References >> > > > >> > > > Visible links >> > > > 1. mailto:[9][10]pasik@iki.fi >> > > > 2. >> > > >> > [10][11] >> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > > > 3. >> > > >> > [11][12] >> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > > > 4. mailto:[12][13]pasik@iki.fi >> > > > 5. >> > > >> > [13][14] >> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > > > 6. >> > > >> > [14][15] >> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > > > 7. mailto:[15][16]pasik@iki.fi >> > > > Asserting Post complete GPIO!!! >> > > > Transfer control to CSM 16-bit binary for legacy boot >> > > > __ __ _____ _ _ _____ _ _ >> > > > \ \/ /___ _ __ |___ /| || | |___ / _ __ ___| || | >> _ >> > __ _ >> > > __ ___ >> > > > \ // _ \ '_ \ |_ \| || |_ |_ \ __| '__/ __| || |_ >> __| >> > '_ \| >> > > '__/ _ \ >> > > > / \ __/ | | | ___) |__ _| ___) |__| | | (__|__ >> _|__| >> > |_) | | >> > > | __/ >> > > > /_/\_\___|_| |_| |____(_) |_|(_)____/ |_| \___| |_| >> | >> > .__/|_| >> > > \___| >> > > > >> |_| >> > > > (XEN) Xen version 3.4.3-rc4-pre (kishore@localdomain) >> (gcc >> > version >> > > 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar 15 13:44:31 PDT >> 2010 >> > > > (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 2010 +0000 >> > > 19924:6e72f8c3c017 >> > > > (XEN) Command line: console=vga,com1 com1=115200,8n1 msi=1 >> > iommu=1 >> > > > (XEN) Video information: >> > > > (XEN) VGA is text mode 80x25, font 8x16 >> > > > (XEN) VBE/DDC methods: none; EDID transfer time: 0 >> seconds >> > > > (XEN) EDID info not retrieved because no DDC retrieval >> method >> > > detected >> > > > (XEN) Disc information: >> > > > (XEN) Found 1 MBR signatures >> > > > (XEN) Found 1 EDD information structures >> > > > (XEN) Xen-e820 RAM map: >> > > > (XEN) 0000000000000000 - 000000000009d000 (usable) >> > > > (XEN) 000000000009d000 - 00000000000a0000 (reserved) >> > > > (XEN) 00000000000e0000 - 0000000000100000 (reserved) >> > > > (XEN) 0000000000100000 - 000000006d597000 (usable) >> > > > (XEN) 000000006d597000 - 000000006d686000 (reserved) >> > > > (XEN) 000000006d686000 - 000000006f598000 (usable) >> > > > (XEN) 000000006f598000 - 000000006f59a000 (reserved) >> > > > (XEN) 000000006f59a000 - 000000006f5af000 (ACPI NVS) >> > > > (XEN) 000000006f5af000 - 000000006f5d9000 (reserved) >> > > > (XEN) 000000006f5d9000 - 000000006f5f9000 (ACPI data) >> > > > (XEN) 000000006f5f9000 - 000000006f6df000 (ACPI NVS) >> > > > (XEN) 000000006f6df000 - 000000006f700000 (ACPI data) >> > > > (XEN) 000000006f700000 - 0000000080000000 (reserved) >> > > > (XEN) 00000000a0000000 - 00000000b0000000 (reserved) >> > > > (XEN) 00000000fc000000 - 00000000fd000000 (reserved) >> > > > (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) >> > > > (XEN) 00000000ffc00000 - 0000000100000000 (reserved) >> > > > (XEN) System RAM: 1780MB (1823000kB) >> > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL ) >> > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL THRLY >> 0 >> > > 1000013) >> > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL THRLY >> 0 >> > MSFT >> > > 100000D) >> > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL THRLY >> 3 >> > MSFT >> > > 100000D) >> > > > (XEN) ACPI: FACS 6F5F9000, 0040 >> > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL THRLY >> 0 >> > MSFT >> > > 100000D) >> > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL THRLY >> 1 >> > MSFT >> > > 100000D) >> > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL THRLY >> 1 >> > MSFT >> > > 100000D) >> > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL THRLY >> 1 >> > MSFT >> > > 100000D) >> > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL THRLY >> 0 >> > MSFT >> > > 100000D) >> > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 INTEL SSDT PM >> 4000 >> > INTL >> > > 20061109) >> > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL THRLY >> 1 >> > MSFT >> > > 100000D) >> > > > (XEN) Domain heap initialised >> > > > (XEN) Processor #0 6:12 APIC version 21 >> > > > (XEN) Processor #2 6:12 APIC version 21 >> > > > (XEN) Processor #4 6:12 APIC version 21 >> > > > (XEN) Processor #16 6:12 APIC version 21 >> > > > (XEN) Processor #18 6:12 APIC version 21 >> > > > (XEN) Processor #20 6:12 APIC version 21 >> > > > (XEN) Processor #1 6:12 APIC version 21 >> > > > (XEN) Processor #3 6:12 APIC version 21 >> > > > (XEN) Processor #5 6:12 APIC version 21 >> > > > (XEN) Processor #17 6:12 APIC version 21 >> > > > (XEN) Processor #19 6:12 APIC version 21 >> > > > (XEN) Processor #21 6:12 APIC version 21 >> > > > (XEN) IOAPIC[0]: apic_id 8, version 32, address >> 0xfec00000, GSI >> > 0-23 >> > > > (XEN) IOAPIC[1]: apic_id 9, version 32, address >> 0xfec90000, GSI >> > 24-47 >> > > > (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs >> > > > (XEN) Intel VT-d DMAR tables have been parsed. >> > > > (XEN) Using scheduler: SMP Credit Scheduler (credit) >> > > > (XEN) Detected 3200.207 MHz processor. >> > > > (XEN) VMX: Supported advanced features: >> > > > (XEN) - APIC MMIO access virtualisation >> > > > (XEN) - APIC TPR shadow >> > > > (XEN) - Extended Page Tables (EPT) >> > > > (XEN) - Virtual-Processor Identifiers (VPID) >> > > > (XEN) - Virtual NMI >> > > > (XEN) - MSR direct-access bitmap >> > > > (XEN) VMX: EPT is available. >> > > > (XEN) VMX: VPID is available. >> > > > (XEN) HVM: VMX enabled >> > > > (XEN) HVM: Hardware Assisted Paging detected. >> > > > (XEN) CPU0: Intel Genuine Intel(R) CPU 000 @ >> > 3.20GHz >> > > stepping 00 >> > > > (XEN) Booting processor 1/2 eip 88000 >> > > > (XEN) CPU1: Intel Genuine Intel(R) CPU 000 @ >> > 3.20GHz >> > > stepping 00 >> > > > (XEN) Booting processor 2/4 eip 88000 >> > > > (XEN) CPU2: Intel Genuine Intel(R) CPU 000 @ >> > 3.20GHz >> > > stepping 00 >> > > > (XEN) Booting processor 3/16 eip 88000 >> > > > (XEN) CPU3: Intel Genuine Intel(R) CPU 000 @ >> > 3.20GHz >> > > stepping 00 >> > > > (XEN) Booting processor 4/18 eip 88000 >> > > > (XEN) CPU4: Intel Genuine Intel(R) CPU 000 @ >> > 3.20GHz >> > > stepping 00 >> > > > (XEN) Booting processor 5/20 eip 88000 >> > > > (XEN) CPU5: Intel Genuine Intel(R) CPU 000 @ >> > 3.20GHz >> > > stepping 00 >> > > > (XEN) Booting processor 6/1 eip 88000 >> > > > (XEN) CPU6: Intel Genuine Intel(R) CPU 000 @ >> > 3.20GHz >> > > stepping 00 >> > > > (XEN) Booting processor 7/3 eip 88000 >> > > > (XEN) CPU7: Intel Genuine Intel(R) CPU 000 @ >> > 3.20GHz >> > > stepping 00 >> > > > (XEN) Booting processor 8/5 eip 88000 >> > > > (XEN) CPU8: Intel Genuine Intel(R) CPU 000 @ >> > 3.20GHz >> > > stepping 00 >> > > > (XEN) Booting processor 9/17 eip 88000 >> > > > (XEN) CPU9: Intel Genuine Intel(R) CPU 000 @ >> > 3.20GHz >> > > stepping 00 >> > > > (XEN) Booting processor 10/19 eip 88000 >> > > > (XEN) CPU10: Intel Genuine Intel(R) CPU 000 @ >> > 3.20GHz >> > > stepping 00 >> > > > (XEN) Booting processor 11/21 eip 88000 >> > > > (XEN) CPU11: Intel Genuine Intel(R) CPU 000 @ >> > 3.20GHz >> > > stepping 00 >> > > > (XEN) Total of 12 processors activated. >> > > > (XEN) ENABLING IO-APIC IRQs >> > > > (XEN) -> Using new ACK method >> > > > (XEN) checking TSC synchronization across 12 CPUs: passed. >> > > > (XEN) Platform timer is 14.318MHz HPET >> > > > ?(XEN) Brought up 12 CPUs >> > > > (XEN) Intel VT-d Snoop Control supported. >> > > > (XEN) Intel VT-d DMA Passthrough not supported. >> > > > (XEN) Intel VT-d Queued Invalidation supported. >> > > > (XEN) Intel VT-d Interrupt Remapping supported. >> > > > (XEN) I/O virtualisation enabled >> > > > (XEN) I/O virtualisation for PV guests disabled >> > > > (XEN) xenoprof: Initialization failed. Intel processor >> model 44 >> > for P6 >> > > class family is not supported >> > > > (XEN) *** LOADING DOMAIN 0 *** >> > > > (XEN) Xen kernel: 64-bit, lsb, compat32 >> > > > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> >> > 0x26bb000 >> > > > (XEN) PHYSICAL MEMORY ARRANGEMENT: >> > > > (XEN) Dom0 alloc.: 0000000064000000->0000000068000000 >> > (404490 pages >> > > to be allocated) >> > > > (XEN) VIRTUAL MEMORY ARRANGEMENT: >> > > > (XEN) Loaded kernel: ffffffff81000000->ffffffff826bb000 >> > > > (XEN) Init. ramdisk: ffffffff826bb000->ffffffff82d0d800 >> > > > (XEN) Phys-Mach map: ffffffff82d0e000->ffffffff83044050 >> > > > (XEN) Start info: ffffffff83045000->ffffffff830454b4 >> > > > (XEN) Page tables: ffffffff83046000->ffffffff83063000 >> > > > (XEN) Boot stack: ffffffff83063000->ffffffff83064000 >> > > > (XEN) TOTAL: ffffffff80000000->ffffffff83400000 >> > > > (XEN) ENTRY ADDRESS: ffffffff819c1200 >> > > > (XEN) Dom0 has maximum 12 VCPUs >> > > > (XEN) Scrubbing Free RAM: .done. >> > > > (XEN) Xen trace buffers: disabled >> > > > (XEN) Std. Loglevel: Errors and warnings >> > > > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and >> > warnings) >> > > > (XEN) Xen is relinquishing VGA console. >> > > > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times >> to >> > switch >> > > input to Xen) >> > > > (XEN) Freed 128kB init memory. >> > > > mapping kernel into physical memory >> > > > Xen: setup ISA identity maps >> > > > about to get started... >> > > > Initializing cgroup subsys cpuset >> > > > Initializing cgroup subsys cpu >> > > > Linux version 2.6.32.9 (kishore@localhost.localdomain) >> (gcc >> > version >> > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 15 >> 15:16:28 PDT >> > 2010 >> > > > Command line: ro root=/dev/VolGroup01/LogVol00 >> console=hvc0 >> > > earlyprintk=xen nomodeset >> > > > KERNEL supported cpus: >> > > > Intel GenuineIntel >> > > > AMD AuthenticAMD >> > > > Centaur CentaurHauls >> > > > BIOS-provided physical RAM map: >> > > > Xen: 0000000000000000 - 000000000009d000 (usable) >> > > > Xen: 000000000009d000 - 0000000000100000 (reserved) >> > > > Xen: 0000000000100000 - 0000000066c0a000 (usable) >> > > > Xen: 000000006d597000 - 000000006d686000 (reserved) >> > > > Xen: 000000006f598000 - 000000006f59a000 (reserved) >> > > > Xen: 000000006f59a000 - 000000006f5af000 (ACPI NVS) >> > > > Xen: 000000006f5af000 - 000000006f5d9000 (reserved) >> > > > Xen: 000000006f5d9000 - 000000006f5f9000 (ACPI data) >> > > > Xen: 000000006f5f9000 - 000000006f6df000 (ACPI NVS) >> > > > Xen: 000000006f6df000 - 000000006f700000 (ACPI data) >> > > > Xen: 000000006f700000 - 0000000080000000 (reserved) >> > > > Xen: 00000000a0000000 - 00000000b0000000 (reserved) >> > > > Xen: 00000000fc000000 - 00000000fd000000 (reserved) >> > > > Xen: 00000000fed1c000 - 00000000fed20000 (reserved) >> > > > Xen: 00000000ffc00000 - 0000000100000000 (reserved) >> > > > bootconsole [xenboot0] enabled >> > > > DMI 2.4 present. >> > > > last_pfn = 0x66c0a max_arch_pfn = 0x400000000 >> > > > init_memory_mapping: 0000000000000000-0000000066c0a000 >> > > > RAMDISK: 026bb000 - 02d0d800 >> > > > ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL ) >> > > > ACPI: XSDT 000000006f6fe120 00064 (v01 INTEL THRLY >> 00000000 >> > > 01000013) >> > > > ACPI: FACP 000000006f6fd000 000F4 (v04 INTEL THRLY >> 00000000 >> > MSFT >> > > 0100000D) >> > > > ACPI: DSDT 000000006f6f5000 074F1 (v02 INTEL THRLY >> 00000003 >> > MSFT >> > > 0100000D) >> > > > ACPI: FACS 000000006f5f9000 00040 >> > > > ACPI: APIC 000000006f6f4000 001CC (v02 INTEL THRLY >> 00000000 >> > MSFT >> > > 0100000D) >> > > > ACPI: MCFG 000000006f6f3000 0003C (v01 INTEL THRLY >> 00000001 >> > MSFT >> > > 0100000D) >> > > > ACPI: HPET 000000006f6f2000 00038 (v01 INTEL THRLY >> 00000001 >> > MSFT >> > > 0100000D) >> > > > ACPI: SLIT 000000006f6f1000 00030 (v01 INTEL THRLY >> 00000001 >> > MSFT >> > > 0100000D) >> > > > ACPI: WDDT 000000006f6f0000 00040 (v01 INTEL THRLY >> 00000000 >> > MSFT >> > > 0100000D) >> > > > ACPI: SSDT 000000006f5d9000 1FDDC (v01 INTEL SSDT PM >> 00004000 >> > INTL >> > > 20061109) >> > > > ACPI: 000000006f6ee000 001D0 (v01 INTEL THRLY >> 00000001 >> > MSFT >> > > 0100000D) >> > > > No NUMA configuration found >> > > > Faking a node at 0000000000000000-0000000066c0a000 >> > > > Bootmem setup node 0 0000000000000000-0000000066c0a000 >> > > > NODE_DATA [0000000000008000 - 000000000001ffff] >> > > > bootmap [0000000000020000 - 000000000002cd87] pages d >> > > > (9 early reservations) ==> bootmem [0000000000 - >> 0066c0a000] >> > > > #0 [0000000000 - 0000001000] BIOS data page ==> >> [0000000000 >> > - >> > > 0000001000] >> > > > #1 [0003046000 - 0003063000] XEN PAGETABLES ==> >> [0003046000 >> > - >> > > 0003063000] >> > > > #2 [0000006000 - 0000008000] TRAMPOLINE ==> >> [0000006000 >> > - >> > > 0000008000] >> > > > #3 [0001000000 - 000269ae98] TEXT DATA BSS ==> >> [0001000000 >> > - >> > > 000269ae98] >> > > > #4 [00026bb000 - 0002d0d800] RAMDISK ==> >> [00026bb000 >> > - >> > > 0002d0d800] >> > > > #5 [0002d0e000 - 0003046000] XEN START INFO ==> >> [0002d0e000 >> > - >> > > 0003046000] >> > > > #6 [000269b000 - 000269b011] BRK ==> >> [000269b000 >> > - >> > > 000269b011] >> > > > #7 [0000100000 - 000041a000] PGTABLE ==> >> [0000100000 >> > - >> > > 000041a000] >> > > > #8 [0000001000 - 0000001030] ACPI SLIT ==> >> [0000001000 >> > - >> > > 0000001030] >> > > > found SMP MP-table at [ffff8800000fd750] fd750 >> > > > Zone PFN ranges: >> > > > DMA 0x00000000 -> 0x00001000 >> > > > DMA32 0x00001000 -> 0x00100000 >> > > > Normal 0x00100000 -> 0x00100000 >> > > > Movable zone start PFN for each node >> > > > early_node_map[2] active PFN ranges >> > > > 0: 0x00000000 -> 0x0000009d >> > > > 0: 0x00000100 -> 0x00066c0a >> > > > ACPI: PM-Timer IO Port: 0x408 >> > > > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >> > > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) >> > > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) >> > > > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled) >> > > > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled) >> > > > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) >> > > > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] enabled) >> > > > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) >> > > > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] enabled) >> > > > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled) >> > > > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled) >> > > > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled) >> > > > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) >> > > > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) >> > > > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) >> > > > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) >> > > > ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) >> > > > ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) >> > > > ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) >> > > > ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) >> > > > ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) >> > > > ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) >> > > > ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) >> > > > ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) >> > > > ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1]) >> > > > ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1]) >> > > > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) >> > > > IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI >> 0-0 >> > > > ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24]) >> > > > IOAPIC[1]: apic_id 9, version 0, address 0xfec90000, GSI >> 24-24 >> > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> > > > ERROR: Unable to locate IOAPIC for GSI 2 >> > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high >> level) >> > > > ERROR: Unable to locate IOAPIC for GSI 9 >> > > > Using ACPI (MADT) for SMP configuration information >> > > > ACPI: HPET id: 0x8086a401 base: 0xfed00000 >> > > > SMP: Allowing 12 CPUs, 0 hotplug CPUs >> > > > PM: Registered nosave memory: 000000000009d000 - >> > 0000000000100000 >> > > > Allocating PCI resources starting at b0000000 (gap: >> > b0000000:4c000000) >> > > > Booting paravirtualized kernel on Xen >> > > > Xen version: 3.4.3-rc4-pre (preserve-AD) (dom0) >> > > > NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 >> nr_node_ids:1 >> > > > PERCPU: Embedded 478 pages/cpu @ffff880005ebc000 s1928024 >> r8192 >> > d21672 >> > > u1957888 >> > > > pcpu-alloc: s1928024 r8192 d21672 u1957888 alloc=478*4096 >> > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] >> 06 >> > [0] 07 >> > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 >> > > > Xen: using vcpu_info placement >> > > > Built 1 zonelists in Node order, mobility grouping on. >> Total >> > pages: >> > > 409291 >> > > > Policy zone: DMA32 >> > > > Kernel command line: ro root=/dev/VolGroup01/LogVol00 >> > console=hvc0 >> > > earlyprintk=xen nomodeset >> > > > PID hash table entries: 4096 (order: 3, 32768 bytes) >> > > > Initializing CPU#0 >> > > > DMA: Placing 64MB software IO TLB between ffff880007525000 >> - >> > > ffff88000b525000 >> > > > DMA: software IO TLB at phys 0x7525000 - 0xb525000 >> > > > xen_swiotlb_fixup: buf=ffff880007525000 size=67108864 >> > > > xen_swiotlb_fixup: buf=ffff88000b585000 size=32768 >> > > > Memory: 1514268k/1683496k available (4654k kernel code, >> 396k >> > absent, >> > > 168832k reserved, 3443k data, 3396k init) >> > > > SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, >> > CPUs=12, >> > > Nodes=1 >> > > > Hierarchical RCU implementation. >> > > > NR_IRQS:4352 nr_irqs:3072 >> > > > Already setup the GSI :0 >> > > > Already setup the GSI :1 >> > > > Already setup the GSI :2 >> > > > Already setup the GSI :3 >> > > > Already setup the GSI :4 >> > > > Already setup the GSI :5 >> > > > Already setup the GSI :6 >> > > > Already setup the GSI :7 >> > > > Already setup the GSI :8 >> > > > Already setup the GSI :9 >> > > > Already setup the GSI :10 >> > > > Already setup the GSI :11 >> > > > Already setup the GSI :12 >> > > > Already setup the GSI :13 >> > > > Already setup the GSI :14 >> > > > Already setup the GSI :15 >> > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high >> level) >> > > > xen: sci override: source_irq=9 global_irq=9 trigger=c >> > polarity=1 >> > > > xen_allocate_pirq: returning irq 9 for gsi 9 >> > > > Already setup the GSI :9 >> > > > xen: acpi sci 9 >> > > > Console: colour VGA+ 80x25 >> > > > console [hvc0] enabled, bootconsole disabled console >> [hvc0] >> > enabled, >> > > bootconsole disabled >> > > > Lock dependency validator: Copyright (c) 2006 Red Hat, >> Inc., >> > Ingo >> > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: >> > 48 >> > > ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: >> > 4096 ... >> > > MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: >> 32768 >> > ... >> > > CHAINHASH_SIZE: 16384 memory used by lock >> dependency >> > info: >> > > 6367 kB per task-struct memory footprint: 2688 bytes >> allocated >> > 17039360 >> > > bytes of page_cgroup please try 'cgroup_disable=memory' >> option if >> > you >> > > don't want memory cgroups installing Xen timer for CPU 0 >> Detected >> > > 3200.206 MHz processor. Calibrating delay loop (skipped), >> value >> > > calculated using timer frequency.. 6400.41 BogoMIPS >> (lpj=3200206) >> > > Security Framework initialized SELinux: Initializing. >> Dentry >> > cache hash >> > > table entries: 262144 (order: 9, 2097152 bytes) Inode-cache >> hash >> > table >> > > entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash >> table >> > > entries: 256 Initializing cgroup subsys ns Initializing >> cgroup >> > subsys >> > > cpuacct Initializing cgroup subsys memory Initializing >> cgroup >> > subsys >> > > devices Initializing cgroup subsys freezer Initializing >> cgroup >> > subsys >> > > net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: >> 256K >> > CPU: >> > > L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU: Unsupported number >> of >> > siblings >> > > 32 Performance Events: unsupported p6 CPU model 44 no PMU >> driver, >> > > software events only. lockdep: fixing up alternatives. SMP >> > alternatives: >> > > switching to UP code ACPI: Core revision 20090903 ftrace: >> > converting >> > > mcount calls to 0f 1f 44 00 00 ftrace: allocating 27971 >> entries >> > in 110 >> > > pages installing Xen timer for CPU 1 lockdep: fixing up >> > alternatives. >> > > SMP alternatives: switching to SMP code Initializing CPU#1 >> CPU: >> > L1 I >> > > cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 >> cache: >> > 12288K >> > > CPU 1/0x0 -> Node 0 CPU: Unsupported number of siblings 32 >> > installing >> > > Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I cache: 32K, >> L1 D >> > cache: >> > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 2/0x0 -> >> Node 0 >> > CPU: >> > > Unsupported number of siblings 32 installing Xen timer for >> CPU 3 >> > > Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K >> CPU: L2 >> > cache: >> > > 256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node 0 CPU: >> Unsupported >> > number >> > > of siblings 32 installing Xen timer for CPU 4 Initializing >> CPU#4 >> > CPU: L1 >> > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 >> cache: >> > 12288K >> > > CPU 4/0x0 -> Node 0 CPU: Unsupported number of siblings 32 >> > installing >> > > Xen timer for CPU 5 Initializing CPU#5 CPU: L1 I cache: 32K, >> L1 D >> > cache: >> > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 5/0x0 -> >> Node 0 >> > CPU: >> > > Unsupported number of siblings 32 installing Xen timer for >> CPU 6 >> > > Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K >> CPU: L2 >> > cache: >> > > 256K CPU: L3 cache: 12288K CPU 6/0x0 -> Node 0 CPU: >> Unsupported >> > number >> > > of siblings 32 installing Xen timer for CPU 7 Initializing >> CPU#7 >> > CPU: L1 >> > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 >> cache: >> > 12288K >> > > CPU 7/0x0 -> Node 0 CPU: Unsupported number of siblings 32 >> > installing >> > > Xen timer for CPU 8 Initializing CPU#8 CPU: L1 I cache: 32K, >> L1 D >> > cache: >> > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 8/0x0 -> >> Node 0 >> > CPU: >> > > Unsupported number of siblings 32 installing Xen timer for >> CPU 9 >> > > Initializing CPU#9 CPU: L1 I cache: 32K, L1 D cache: 32K >> CPU: L2 >> > cache: >> > > 256K CPU: L3 cache: 12288K CPU 9/0x0 -> Node 0 CPU: >> Unsupported >> > number >> > > of siblings 32 installing Xen timer for CPU 10 Initializing >> > CPU#10 CPU: >> > > L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 >> > cache: >> > > 12288K CPU 10/0x0 -> Node 0 CPU: Unsupported number of >> siblings >> > 32 >> > > installing Xen timer for CPU 11 Initializing CPU#11 CPU: L1 >> I >> > cache: >> > > 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: >> 12288K >> > CPU >> > > 11/0x0 -> Node 0 CPU: Unsupported number of siblings 32 >> Brought >> > up 12 >> > > CPUs Grant table initialized regulator: core version 0.5 >> Time: >> > 14:45:00 >> > > Date: 03/16/10 NET: Registered protocol family 16 >> > xenbus_probe_init ok >> > > ACPI FADT declares the system doesn't support PCIe ASPM, so >> > disable it >> > > ACPI: bus type pci registered PCI: MCFG configuration 0: >> base >> > a0000000 >> > > segment 0 buses 0 - 255 PCI: MCFG area at a0000000 reserved >> in >> > E820 PCI: >> > > Using MMCONFIG at a0000000 - afffffff PCI: Using >> configuration >> > type 1 >> > > for base access bio: create slab <bio-0> at 0 ACPI Error: >> Field >> > [CPB3] >> > > at 96 exceeds Buffer [NULL] size 64 (bits) >> > (20090903/dsopcode-596) ACPI >> > > Error (psparse-0537): Method parse/execution failed >> [\_SB_._OSC] >> > (Node >> > > ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI: Interpreter >> enabled >> > ACPI: >> > > (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt >> > routing ACPI >> > > Warning: Incorrect checksum in table [ ] - 97, should be >> DB >> > > (20090903/tbutils-314) ACPI: No dock devices found. ACPI: >> PCI >> > Root >> > > Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported >> from D0 >> > D3hot >> > > D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: >> PME# >> > supported >> > > from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci >> > 0000:00:03.0: >> > > PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# >> > disabled pci >> > > 0000:00:04.0: PME# supported from D0 D3hot D3cold pci >> > 0000:00:04.0: PME# >> > > disabled pci 0000:00:05.0: PME# supported from D0 D3hot >> D3cold >> > pci >> > > 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported >> from >> > D0 >> > > D3hot D3cold pci 0000:00:06.0: PME# disabled pci >> 0000:00:07.0: >> > PME# >> > > supported from D0 D3hot D3cold pci 0000:00:07.0: PME# >> disabled >> > pci >> > > 0000:00:08.0: PME# supported from D0 D3hot D3cold pci >> > 0000:00:08.0: PME# >> > > disabled pci 0000:00:09.0: PME# supported from D0 D3hot >> D3cold >> > pci >> > > 0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME# supported >> from >> > D0 >> > > D3hot D3cold pci 0000:00:0a.0: PME# disabled pci >> 0000:00:13.0: >> > PME# >> > > supported from D0 D3hot D3cold pci 0000:00:13.0: PME# >> disabled >> > pci >> > > 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci >> > 0000:00:1a.7: PME# >> > > disabled pci 0000:00:1c.0: PME# supported from D0 D3hot >> D3cold >> > pci >> > > 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported >> from >> > D0 >> > > D3hot D3cold pci 0000:00:1c.4: PME# disabled pci >> 0000:00:1c.5: >> > PME# >> > > supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# >> disabled >> > pci >> > > 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci >> > 0000:00:1d.7: PME# >> > > disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed >> by >> > ICH6 >> > > ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f >> claimed >> > by ICH6 >> > > GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at >> 0680 >> > (mask >> > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at >> 0ca0 >> > (mask >> > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at >> 0600 >> > (mask >> > > 001f) pci 0000:00:1f.2: PME# supported from D3hot pci >> > 0000:00:1f.2: PME# >> > > disabled pci 0000:01:00.0: PME# supported from D0 D3hot >> D3cold >> > pci >> > > 0000:01:00.0: PME# disabled pci 0000:01:00.1: PME# supported >> from >> > D0 >> > > D3hot D3cold pci 0000:01:00.1: PME# disabled pci >> 0000:0c:00.0: >> > disabling >> > > ASPM on pre-1.1 PCIe device. You can enable it with >> > 'pcie_aspm=force' >> > > pci 0000:00:1e.0: transparent bridge ACPI: PCI Root Bridge >> [PCI1] >> > > (0000:fe) ACPI: PCI Root Bridge [PCI2] (0000:ff) ACPI: PCI >> > Interrupt >> > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI >> > Interrupt Link >> > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI >> Interrupt >> > Link >> > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI >> Interrupt >> > Link >> > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI >> Interrupt >> > Link >> > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: >> PCI >> > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) >> ACPI: >> > PCI >> > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, >> > disabled. >> > > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 >> 14 >> > 15) >> > > xenbus_probe_backend_init bus registered ok >> > xenbus_probe_frontend_init >> > > bus registered ok xen_balloon: Initialising balloon driver >> with >> > page >> > > order 0. vgaarb: device added: >> > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none >> vgaarb: >> > loaded >> > > SCSI subsystem initialized usbcore: registered new interface >> > driver >> > > usbfs usbcore: registered new interface driver hub usbcore: >> > registered >> > > new device driver usb PCI: Using ACPI for IRQ routing >> NetLabel: >> > > Initializing NetLabel: domain hash size = 128 NetLabel: >> > protocols = >> > > UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by >> default >> > > Switching to clocksource xen kstop/0 used greatest stack >> depth: >> > 6568 >> > > bytes left kstop/1 used greatest stack depth: 6536 bytes >> left >> > pnp: PnP >> > > ACPI init ACPI: bus type pnp registered xen_allocate_pirq: >> > returning irq >> > > 8 for gsi 8 Already setup the GSI :8 xen_allocate_pirq: >> returning >> > irq 13 >> > > for gsi 13 Already setup the GSI :13 pnp: PnP ACPI: found 13 >> > devices >> > > ACPI: ACPI bus type pnp unregistered system 00:07: ioport >> range >> > > 0x500-0x53f has been reserved system 00:07: ioport range >> > 0x400-0x47f has >> > > been reserved system 00:07: ioport range 0x800-0x81f has >> been >> > reserved >> > > system 00:07: ioport range 0x2f8-0x2ff has been reserved >> system >> > 00:07: >> > > iomem range 0xfed1c000-0xfed8bffe could not be reserved >> system >> > 00:07: >> > > iomem range 0xff000000-0xffffffff could not be reserved >> system >> > 00:07: >> > > iomem range 0xfee00000-0xfeefffff has been reserved system >> 00:07: >> > iomem >> > > range 0xfe900000-0xfe90001f has been reserved system 00:07: >> iomem >> > range >> > > 0xfea00000-0xfea0001f has been reserved system 00:07: iomem >> range >> > > 0xfed1b000-0xfed1bfff has been reserved pci 0000:0c:00.0: >> BAR 6: >> > no >> > > parent found for of device [0xffff0000-0xffffffff] pci >> > 0000:00:01.0: PCI >> > > bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: >> > > 0x1000-0x1fff pci 0000:00:01.0: MEM window: >> > 0xb1900000-0xb19fffff pci >> > > 0000:00:01.0: PREFETCH window: disabled pci 0000:00:02.0: >> PCI >> > bridge, >> > > secondary bus 0000:02 pci 0000:00:02.0: IO window: >> disabled pci >> > > 0000:00:02.0: MEM window: disabled pci 0000:00:02.0: >> PREFETCH >> > > window: disabled pci 0000:00:03.0: PCI bridge, secondary bus >> > 0000:03 pci >> > > 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM >> > window: >> > > disabled pci 0000:00:03.0: PREFETCH window: disabled pci >> > 0000:00:04.0: >> > > PCI bridge, secondary bus 0000:04 pci 0000:00:04.0: IO >> window: >> > > disabled pci 0000:00:04.0: MEM window: disabled pci >> > 0000:00:04.0: >> > > PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, >> secondary >> > bus >> > > 0000:05 pci 0000:00:05.0: IO window: disabled pci >> 0000:00:05.0: >> > MEM >> > > window: disabled pci 0000:00:05.0: PREFETCH window: >> disabled >> > pci >> > > 0000:00:06.0: PCI bridge, secondary bus 0000:06 pci >> 0000:00:06.0: >> > IO >> > > window: disabled pci 0000:00:06.0: MEM window: disabled >> pci >> > > 0000:00:06.0: PREFETCH window: disabled pci 0000:00:07.0: >> PCI >> > bridge, >> > > secondary bus 0000:07 pci 0000:00:07.0: IO window: >> disabled pci >> > > 0000:00:07.0: MEM window: disabled pci 0000:00:07.0: >> PREFETCH >> > > window: disabled pci 0000:00:08.0: PCI bridge, secondary bus >> > 0000:08 pci >> > > 0000:00:08.0: IO window: disabled pci 0000:00:08.0: MEM >> > window: >> > > disabled pci 0000:00:08.0: PREFETCH window: disabled pci >> > 0000:00:09.0: >> > > PCI bridge, secondary bus 0000:09 pci 0000:00:09.0: IO >> window: >> > > 0x3000-0x3fff pci 0000:00:09.0: MEM window: >> > 0xb1b00000-0xb1cfffff pci >> > > 0000:00:09.0: PREFETCH window: >> > 0x000000b1d00000-0x000000b1efffff pci >> > > 0000:00:0a.0: PCI bridge, secondary bus 0000:0a pci >> 0000:00:0a.0: >> > IO >> > > window: disabled pci 0000:00:0a.0: MEM window: disabled >> pci >> > > 0000:00:0a.0: PREFETCH window: disabled pci 0000:00:1c.0: >> PCI >> > bridge, >> > > secondary bus 0000:0b pci 0000:00:1c.0: IO window: >> disabled pci >> > > 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: >> PREFETCH >> > > window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus >> > 0000:0c pci >> > > 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM >> > window: >> > > 0xb1000000-0xb18fffff pci 0000:00:1c.4: PREFETCH window: >> > > 0x000000b0000000-0x000000b0ffffff pci 0000:00:1c.5: PCI >> bridge, >> > > secondary bus 0000:0d pci 0000:00:1c.5: IO window: >> disabled pci >> > > 0000:00:1c.5: MEM window: disabled pci 0000:00:1c.5: >> PREFETCH >> > > window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus >> > 0000:0e pci >> > > 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM >> > window: >> > > disabled pci 0000:00:1e.0: PREFETCH window: disabled pci >> > 0000:00:01.0: >> > > PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci 0000:00:02.0: >> PCI >> > INT A >> > > -> GSI 29 (level, low) -> IRQ 29 pci 0000:00:03.0: PCI INT A >> -> >> > GSI 24 >> > > (level, low) -> IRQ 24 pci 0000:00:04.0: PCI INT A -> GSI 25 >> > (level, >> > > low) -> IRQ 25 pci 0000:00:05.0: PCI INT A -> GSI 26 (level, >> low) >> > -> IRQ >> > > 26 pci 0000:00:06.0: PCI INT A -> GSI 27 (level, low) -> IRQ >> 27 >> > pci >> > > 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 pci >> > > 0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 pci >> > > 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci >> > > 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 pci >> > > 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >> > > xen_allocate_pirq: returning irq 16 for gsi 16 Already setup >> the >> > GSI :16 >> > > pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >> pci >> > > 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >> NET: >> > Registered >> > > protocol family 2 IP route cache hash table entries: 65536 >> > (order: 7, >> > > 524288 bytes) TCP established hash table entries: 262144 >> (order: >> > 10, >> > > 4194304 bytes) TCP bind hash table entries: 65536 (order: >> 10, >> > 4718592 >> > > bytes) TCP: Hash tables configured (established 262144 bind >> > 65536) TCP >> > > reno registered NET: Registered protocol family 1 pci >> > 0000:01:00.0: >> > > Disabling L0s pci 0000:01:00.1: Disabling L0s Trying to >> unpack >> > rootfs >> > > image as initramfs... Freeing initrd memory: 6474k freed >> DMA-API: >> > > preallocated 32768 debug entries DMA-API: debugging enabled >> by >> > kernel >> > > config PCI-DMA: Using software bounce buffering for IO >> (SWIOTLB) >> > DMA: >> > > Placing 64MB software IO TLB between ffff880007525000 - >> > ffff88000b525000 >> > > DMA: software IO TLB at phys 0x7525000 - 0xb525000 audit: >> > initializing >> > > netlink socket (disabled) type=2000 audit(1268750702.035:1): >> > initialized >> > > HugeTLB registered 2 MB page size, pre-allocated 0 pages >> VFS: >> > Disk >> > > quotas dquot_6.5.2 Dquot-cache hash table entries: 512 >> (order 0, >> > 4096 >> > > bytes) msgmni has been set to 2970 cryptomgr_test used >> greatest >> > stack >> > > depth: 5864 bytes left cryptomgr_test used greatest stack >> depth: >> > 5816 >> > > bytes left alg: No test for stdrng (krng) Block layer SCSI >> > generic (bsg) >> > > driver version 0.4 loaded (major 252) io scheduler noop >> > registered io >> > > scheduler anticipatory registered io scheduler deadline >> > registered io >> > > scheduler cfq registered (default) pci_hotplug: PCI Hot Plug >> PCI >> > Core >> > > version: 0.5 pciehp 0000:00:09.0:pcie04: HPC vendor_id 8086 >> > device_id >> > > 3410 ss_vid 0 ss_did 0 pciehp: PCI Express Hot Plug >> Controller >> > Driver >> > > version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver >> > version: 0.5 >> > > acpiphp_glue: Slot 2 already registered by another hotplug >> driver >> > > acpiphp_glue: Slot 2 already registered by another hotplug >> driver >> > > acpiphp_glue: Slot 2 already registered by another hotplug >> driver >> > > acpiphp_glue: Slot 2 already registered by another hotplug >> driver >> > > acpiphp_glue: Slot 2 already registered by another hotplug >> driver >> > > acpiphp_glue: Slot 2 already registered by another hotplug >> driver >> > > acpiphp_glue: Slot 2 already registered by another hotplug >> driver >> > > acpiphp_glue: Slot 2 already registered by another hotplug >> driver >> > > pci-stub: invalid id string "" input: Sleep Button as >> > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 >> ACPI: >> > Sleep >> > > Button [SLPB] input: Power Button as >> > > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power >> Button >> > [PWRF] >> > > registering netback hpet_acpi_add: no address or irqs in >> _CRS >> > > Non-volatile memory driver v1.3 Linux agpgart interface >> v0.103 >> > Serial: >> > > 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: >> ttyS1 >> > at I/O >> > > 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module >> > loaded >> > > input: Macintosh mouse button emulation as >> > /devices/virtual/input/input2 >> > > ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ >> 19 >> > ahci >> > > 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f >> impl >> > SATA mode >> > > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum >> part >> > ccc >> > > ems scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci >> scsi4 : >> > ahci >> > > scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, >> > connection >> > > status changed irq 2996 ata2: SATA max UDMA/133 abar >> > m2048@0xb1a00000 >> > > port 0xb1a00180 irq 2996 ata3: SATA max UDMA/133 abar >> > m2048@0xb1a00000 >> > > port 0xb1a00200 irq 2996 ata4: SATA max UDMA/133 abar >> > m2048@0xb1a00000 >> > > port 0xb1a00280 irq 2996 ata5: SATA max UDMA/133 abar >> > m2048@0xb1a00000 >> > > port 0xb1a00300 irq 2996 ata6: SATA max UDMA/133 abar >> > m2048@0xb1a00000 >> > > port 0xb1a00380 irq 2996 Fixed MDIO Bus: probed ehci_hcd: >> USB 2.0 >> > > 'Enhanced' Host Controller (EHCI) Driver ehci_hcd >> 0000:00:1a.7: >> > PCI INT >> > > C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: >> EHCI >> > Host >> > > Controller ehci_hcd 0000:00:1a.7: new USB bus registered, >> > assigned bus >> > > number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd >> > 0000:00:1a.7: irq >> > > 18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7: USB 2.0 >> started, >> > EHCI 1.00 >> > > usb usb1: New USB device found, idVendor=1d6b, >> idProduct=0002 usb >> > usb1: >> > > New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb >> > usb1: >> > > Product: EHCI Host Controller usb usb1: Manufacturer: Linux >> > 2.6.32.9 >> > > ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: >> > configuration #1 >> > > chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: >> 6 >> > ports >> > > detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, >> low) >> > -> IRQ >> > > 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd >> > 0000:00:1d.7: >> > > new USB bus registered, assigned bus number 2 ehci_hcd >> > 0000:00:1d.7: >> > > debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem >> 0xb1a01000 >> > ehci_hcd >> > > 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB >> device >> > found, >> > > idVendor=1d6b, idProduct=0002 usb usb2: New USB device >> strings: >> > Mfr=3, >> > > Product=2, SerialNumber=1 usb usb2: Product: EHCI Host >> Controller >> > usb >> > > usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd usb usb2: >> > SerialNumber: >> > > 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice >> hub >> > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected >> ohci_hcd: >> > USB 1.1 >> > > 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal >> Host >> > > Controller Interface driver xen_allocate_pirq: returning irq >> 16 >> > for gsi >> > > 16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0: PCI INT >> A -> >> > GSI 16 >> > > (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: UHCI Host >> > Controller >> > > uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus >> > number 3 >> > > uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020e0 usb usb3: >> New >> > USB >> > > device found, idVendor=1d6b, idProduct=0001 usb usb3: New >> USB >> > device >> > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: >> UHCI >> > Host >> > > Controller usb usb3: Manufacturer: Linux 2.6.32.9 uhci_hcd >> usb >> > usb3: >> > > SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen >> from >> > 1 >> > > choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports >> detected >> > uhci_hcd >> > > 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 >> uhci_hcd >> > > 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: >> new USB >> > bus >> > > registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq >> 21, >> > io base >> > > 0x000020c0 usb usb4: New USB device found, idVendor=1d6b, >> > idProduct=0001 >> > > usb usb4: New USB device strings: Mfr=3, Product=2, >> > SerialNumber=1 usb >> > > usb4: Product: UHCI Host Controller usb usb4: Manufacturer: >> Linux >> > > 2.6.32.9 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb >> usb4: >> > > configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub >> found >> > hub >> > > 4-0:1.0: 2 ports detected xen_allocate_pirq: returning irq >> 19 for >> > gsi 19 >> > > Already setup the GSI :19 uhci_hcd 0000:00:1a.2: PCI INT D >> -> GSI >> > 19 >> > > (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: UHCI Host >> > Controller >> > > uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus >> > number 5 >> > > uhci_hcd 0000:00:1a.2: irq 19, io base 0x000020a0 usb usb5: >> New >> > USB >> > > device found, idVendor=1d6b, idProduct=0001 usb usb5: New >> USB >> > device >> > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: >> UHCI >> > Host >> > > Controller usb usb5: Manufacturer: Linux 2.6.32.9 uhci_hcd >> usb >> > usb5: >> > > SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen >> from >> > 1 >> > > choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports >> detected >> > > xen_allocate_pirq: returning irq 23 for gsi 23 Already setup >> the >> > GSI :23 >> > > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> >> IRQ 23 >> > > uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd >> > 0000:00:1d.0: new >> > > USB bus registered, assigned bus number 6 uhci_hcd >> 0000:00:1d.0: >> > irq 23, >> > > io base 0x00002080 usb usb6: New USB device found, >> idVendor=1d6b, >> > > idProduct=0001 usb usb6: New USB device strings: Mfr=3, >> > Product=2, >> > > SerialNumber=1 usb usb6: Product: UHCI Host Controller usb >> usb6: >> > > Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb6: >> SerialNumber: >> > > 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice >> hub >> > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected >> > xen_allocate_pirq: >> > > returning irq 19 for gsi 19 Already setup the GSI :19 >> uhci_hcd >> > > 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 >> uhci_hcd >> > > 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: >> new USB >> > bus >> > > registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq >> 19, >> > io base >> > > 0x00002060 usb usb7: New USB device found, idVendor=1d6b, >> > idProduct=0001 >> > > usb usb7: New USB device strings: Mfr=3, Product=2, >> > SerialNumber=1 usb >> > > usb7: Product: UHCI Host Controller usb usb7: Manufacturer: >> Linux >> > > 2.6.32.9 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb >> usb7: >> > > configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub >> found >> > hub >> > > 7-0:1.0: 2 ports detected xen_allocate_pirq: returning irq >> 18 for >> > gsi 18 >> > > Already setup the GSI :18 uhci_hcd 0000:00:1d.2: PCI INT C >> -> GSI >> > 18 >> > > (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI Host >> > Controller >> > > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus >> > number 8 >> > > uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb usb8: >> New >> > USB >> > > device found, idVendor=1d6b, idProduct=0001 usb usb8: New >> USB >> > device >> > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: >> UHCI >> > Host >> > > Controller usb usb8: Manufacturer: Linux 2.6.32.9 uhci_hcd >> usb >> > usb8: >> > > SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen >> from >> > 1 >> > > choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports >> detected >> > PNP: No >> > > PS/2 controller found. Probing ports directly. i8042.c: No >> > controller >> > > found. mice: PS/2 mouse device common for all mice rtc_cmos >> > 00:03: RTC >> > > can wake from S4 rtc_cmos 00:03: rtc core: registered >> rtc_cmos as >> > rtc0 >> > > rtc0: alarms up to one month, y3k, 114 bytes nvram >> device-mapper: >> > > uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl >> > (2009-04-01) >> > > initialised: [16][17]dm-devel@redhat.com cpuidle: using >> governor >> > ladder >> > > cpuidle: using governor menu usbcore: registered new >> interface >> > driver >> > > hiddev usbcore: registered new interface driver usbhid >> usbhid: >> > v2.6:USB >> > > HID core driver nf_conntrack version 0.5.0 (16384 buckets, >> 65536 >> > max) >> > > CONFIG_NF_CT_ACCT is deprecated and will be removed soon. >> Please >> > use >> > > nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack >> module >> > option >> > > or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. >> > ip_tables: (C) >> > > 2000-2006 Netfilter Core Team TCP cubic registered >> Initializing >> > XFRM >> > > netlink socket NET: Registered protocol family 17 registered >> > taskstats >> > > version 1 No TPM chip found, activating TPM-bypass! Magic >> > number: >> > > 2:902:788 pci 0000:00:16.6: hash matches rtc_cmos 00:03: >> setting >> > system >> > > clock to 2010-03-16 14:45:05 UTC (1268750705) Initalizing >> network >> > drop >> > > monitor service ata2: SATA link down (SStatus 0 SControl >> 300) >> > ata4: SATA >> > > link down (SStatus 0 SControl 300) ata6: SATA link down >> (SStatus >> > 0 >> > > SControl 300) ata5: SATA link down (SStatus 0 SControl 300) >> ata3: >> > SATA >> > > link down (SStatus 0 SControl 300) usb 7-1: new low speed >> USB >> > device >> > > using uhci_hcd and address 2 >> > > ====================================================== [ >> INFO: >> > > SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] >> 2.6.32.9 #1 >> > > ------------------------------------------------------ >> khubd/100 >> > > [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: >> > (&retval->lock){......}, >> > > at: [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 and this >> task >> > is >> > > already holding: (&uhci->lock){..-...}, at: >> [<ffffffff8137aedd>] >> > > uhci_urb_enqueue+0x46/0x7e3 which would create a new lock >> > dependency: >> > > (&uhci->lock){..-...} -> (&retval->lock){......} but this >> new >> > > dependency connects a SOFTIRQ-irq-safe lock: >> > (&uhci->lock){..-...} ... >> > > which became SOFTIRQ-irq-safe at: [<ffffffff8108ea6d>] >> > > __lock_acquire+0x2d2/0xc07 [<ffffffff8108f46f>] >> > lock_acquire+0xcd/0xf2 >> > > [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 >> > > [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c >> > > [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a >> > > [<ffffffff8135a479>] rh_timer_func+0xe/0x10 >> > [<ffffffff810693bd>] >> > > run_timer_softirq+0x1a6/0x257 [<ffffffff810627e4>] >> > > __do_softirq+0xe6/0x1bc [<ffffffff81013fac>] >> > call_softirq+0x1c/0x30 >> > > [<ffffffff81015794>] do_softirq+0x4b/0xa7 >> [<ffffffff81062229>] >> > > irq_exit+0x4a/0x89 [<ffffffff812bf9d9>] >> > > xen_evtchn_do_upcall+0x156/0x172 [<ffffffff81013ffe>] >> > > xen_do_hypervisor_callback+0x1e/0x30 to a >> SOFTIRQ-irq-unsafe >> > lock: >> > > (purge_lock){+.+...} ... which became SOFTIRQ-irq-unsafe >> at: ... >> > > [<ffffffff8108eadc>] __lock_acquire+0x341/0xc07 >> > [<ffffffff8108f46f>] >> > > lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] >> > _spin_lock+0x36/0x6b >> > > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a >> > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 >> > [<ffffffff8100e58c>] >> > > xen_alloc_ptpage+0x51/0x82 [<ffffffff8100e5d0>] >> > > xen_alloc_pud+0x13/0x15 [<ffffffff810fe3cf>] >> > __pud_alloc+0x79/0xb3 >> > > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 >> > > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 >> > [<ffffffff8110c197>] >> > > map_vm_area+0x34/0x47 [<ffffffff8110c2cf>] >> > > __vmalloc_area_node+0x125/0x14d [<ffffffff8110c379>] >> > > __vmalloc_node+0x82/0x91 [<ffffffff8110c4e9>] >> > __vmalloc+0x20/0x22 >> > > [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe >> > > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d >> > [<ffffffff819c1d99>] >> > > start_kernel+0x3de/0x426 [<ffffffff819c12c3>] >> > > x86_64_start_reservations+0xae/0xb2 [<ffffffff819c4d5d>] >> > > xen_start_kernel+0x4b9/0x4c0 other info that might help us >> debug >> > this: >> > > 2 locks held by khubd/100: #0: >> (usb_address0_mutex){+.+...}, >> > at: >> > > [<ffffffff81354f5f>] hub_port_init+0x81/0x7e4 #1: >> > > (&uhci->lock){..-...}, at: [<ffffffff8137aedd>] >> > > uhci_urb_enqueue+0x46/0x7e3 the dependencies between >> > SOFTIRQ-irq-safe >> > > lock and the holding lock: -> (&uhci->lock){..-...} ops: 0 { >> > > IN-SOFTIRQ-W at: >> [<ffffffff8108ea6d>] >> > > __lock_acquire+0x2d2/0xc07 >> > [<ffffffff8108f46f>] >> > > lock_acquire+0xcd/0xf2 >> > [<ffffffff81485526>] >> > > _spin_lock_irqsave+0x4f/0x86 >> > > [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c >> > > [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a >> > > [<ffffffff8135a479>] rh_timer_func+0xe/0x10 >> > > [<ffffffff810693bd>] run_timer_softirq+0x1a6/0x257 >> > > [<ffffffff810627e4>] __do_softirq+0xe6/0x1bc >> > > [<ffffffff81013fac>] call_softirq+0x1c/0x30 >> > > [<ffffffff81015794>] do_softirq+0x4b/0xa7 >> > > [<ffffffff81062229>] irq_exit+0x4a/0x89 >> > > [<ffffffff812bf9d9>] xen_evtchn_do_upcall+0x156/0x172 >> > > [<ffffffff81013ffe>] >> xen_do_hypervisor_callback+0x1e/0x30 >> > > INITIAL USE at: [<ffffffff8108eb29>] >> > > __lock_acquire+0x38e/0xc07 >> > [<ffffffff8108f46f>] >> > > lock_acquire+0xcd/0xf2 >> > [<ffffffff81485526>] >> > > _spin_lock_irqsave+0x4f/0x86 >> > [<ffffffff8137c3d7>] >> > > uhci_hub_control+0x74/0x401 >> > [<ffffffff8135bdac>] >> > > usb_hcd_submit_urb+0x7a6/0xa1e >> > > [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1 >> > > [<ffffffff8135d51f>] usb_start_wait_urb+0x54/0x1b1 >> > > [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113 >> > > [<ffffffff81358922>] hub_probe+0x37c/0xfaa >> > > [<ffffffff81360a35>] usb_probe_interface+0x15a/0x1f7 >> > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 >> > > [<ffffffff813077fa>] __device_attach+0x28/0x31 >> > > [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 >> > > [<ffffffff81307891>] device_attach+0x65/0x7c >> > > [<ffffffff8130667e>] bus_probe_device+0x27/0x3e >> > > [<ffffffff813045b3>] device_add+0x3ab/0x57d >> > > [<ffffffff8135e3ca>] usb_set_configuration+0x5b9/0x677 >> > > [<ffffffff81367b85>] generic_probe+0x67/0xae >> > > [<ffffffff813607b1>] usb_probe_device+0x7f/0x87 >> > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 >> > > [<ffffffff813077fa>] __device_attach+0x28/0x31 >> > > [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 >> > > [<ffffffff81307891>] device_attach+0x65/0x7c >> > > [<ffffffff8130667e>] bus_probe_device+0x27/0x3e >> > > [<ffffffff813045b3>] device_add+0x3ab/0x57d >> > > [<ffffffff8135616e>] usb_new_device+0x154/0x201 >> > > [<ffffffff8135b42e>] usb_add_hcd+0x4c5/0x69d >> > > [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 >> > > [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b >> > > [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 >> > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 >> > > [<ffffffff813077ae>] __driver_attach+0x59/0x7d >> > > [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 >> > > [<ffffffff813073fd>] driver_attach+0x21/0x23 >> > > [<ffffffff81306487>] bus_add_driver+0xe1/0x26b >> > > [<ffffffff81307ad5>] driver_register+0xa3/0x11a >> > > [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 >> > > [<ffffffff819f403b>] uhci_hcd_init+0x88/0xc1 >> > > [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b >> > > [<ffffffff819c1961>] kernel_init+0x172/0x1cc >> > > [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key >> at: >> > > [<ffffffff8268de38>] __key.33456+0x0/0x8 ... acquired at: >> > > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 >> > [<ffffffff8108f128>] >> > > __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>] >> > > lock_acquire+0xcd/0xf2 [<ffffffff81485526>] >> > > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] >> > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>] >> > > uhci_alloc_qh+0x33/0x146 [<ffffffff8137af66>] >> > > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>] >> > > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>] >> > > usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] >> > > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] >> > > usb_control_msg+0xee/0x113 [<ffffffff813551fb>] >> > > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] >> > > hub_events+0x91e/0x11a2 [<ffffffff81358432>] >> > hub_thread+0x25/0x199 >> > > [<ffffffff8107b8fd>] kthread+0x6e/0x76 >> [<ffffffff81013eaa>] >> > > child_rip+0xa/0x20 the dependencies between the lock to be >> > acquired >> > > and SOFTIRQ-irq-unsafe lock: -> (purge_lock){+.+...} ops: 0 >> { >> > > HARDIRQ-ON-W at: >> [<ffffffff8108eaba>] >> > > __lock_acquire+0x31f/0xc07 >> > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 >> > > [<ffffffff814853bc>] _spin_lock+0x36/0x6b >> > > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a >> > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 >> > > [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 >> > > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 >> > > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 >> > > [<ffffffff8110bf76>] >> vmap_page_range_noflush+0x9a/0x264 >> > > [<ffffffff8110c161>] >> vmap_page_range+0xe/0x10 >> > > [<ffffffff8110c197>] map_vm_area+0x34/0x47 >> > > [<ffffffff8110c2cf>] >> > __vmalloc_area_node+0x125/0x14d >> > > [<ffffffff8110c379>] >> __vmalloc_node+0x82/0x91 >> > > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 >> > > [<ffffffff819dfef1>] >> > alloc_large_system_hash+0x150/0x1fe >> > > [<ffffffff819e28c5>] >> > vfs_caches_init+0xa9/0x11d >> > > [<ffffffff819c1d99>] >> > start_kernel+0x3de/0x426 >> > > [<ffffffff819c12c3>] >> > > x86_64_start_reservations+0xae/0xb2 >> > > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 >> > SOFTIRQ-ON-W at: >> > > [<ffffffff8108eadc>] >> > __lock_acquire+0x341/0xc07 >> > > [<ffffffff8108f46f>] >> > lock_acquire+0xcd/0xf2 >> > > [<ffffffff814853bc>] >> _spin_lock+0x36/0x6b >> > > [<ffffffff8110aa20>] >> > > __purge_vmap_area_lazy+0x54/0x18a >> > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 >> > > [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 >> > > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 >> > > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 >> > > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 >> > > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 >> > > [<ffffffff8110c197>] map_vm_area+0x34/0x47 >> > > [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d >> > > [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 >> > > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 >> > > [<ffffffff819dfef1>] >> alloc_large_system_hash+0x150/0x1fe >> > > [<ffffffff819e28c5>] >> vfs_caches_init+0xa9/0x11d >> > > [<ffffffff819c1d99>] >> start_kernel+0x3de/0x426 >> > > [<ffffffff819c12c3>] >> > > x86_64_start_reservations+0xae/0xb2 >> > > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 >> INITIAL USE >> > at: >> > > [<ffffffff8108eb29>] >> > __lock_acquire+0x38e/0xc07 >> > > [<ffffffff8108f46f>] >> > lock_acquire+0xcd/0xf2 >> > > [<ffffffff814853bc>] _spin_lock+0x36/0x6b >> > > [<ffffffff8110aa20>] >> > __purge_vmap_area_lazy+0x54/0x18a >> > > [<ffffffff8110c82f>] >> > vm_unmap_aliases+0x167/0x176 >> > > [<ffffffff8100e58c>] >> > xen_alloc_ptpage+0x51/0x82 >> > > [<ffffffff8100e5d0>] >> > xen_alloc_pud+0x13/0x15 >> > > [<ffffffff810fe3cf>] >> __pud_alloc+0x79/0xb3 >> > > [<ffffffff8110bf76>] >> > vmap_page_range_noflush+0x9a/0x264 >> > > [<ffffffff8110c161>] >> > vmap_page_range+0xe/0x10 >> > > [<ffffffff8110c197>] >> map_vm_area+0x34/0x47 >> > > [<ffffffff8110c2cf>] >> > __vmalloc_area_node+0x125/0x14d >> > > [<ffffffff8110c379>] >> > __vmalloc_node+0x82/0x91 >> > > [<ffffffff8110c4e9>] >> __vmalloc+0x20/0x22 >> > > [<ffffffff819dfef1>] >> > > alloc_large_system_hash+0x150/0x1fe >> > > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d >> > > [<ffffffff819c1d99>] start_kernel+0x3de/0x426 >> > > [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2 >> > > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 >> } >> > ... >> > > key at: [<ffffffff81741ef8>] purge_lock.27226+0x18/0x40 >> > ... >> > > acquired at: [<ffffffff8108f20c>] >> __lock_acquire+0xa71/0xc07 >> > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 >> > [<ffffffff814853bc>] >> > > _spin_lock+0x36/0x6b [<ffffffff8110aa20>] >> > > __purge_vmap_area_lazy+0x54/0x18a [<ffffffff8110c82f>] >> > > vm_unmap_aliases+0x167/0x176 [<ffffffff8100d7ca>] >> > > xen_create_contiguous_region+0x51/0x106 >> [<ffffffff81250d84>] >> > > xen_swiotlb_alloc_coherent+0x62/0xa6 [<ffffffff8111188c>] >> > > dma_pool_alloc+0x136/0x2a8 [<ffffffff81370efe>] >> > > ehci_qh_alloc+0x44/0x107 [<ffffffff81373f5d>] >> > > ehci_pci_setup+0x22a/0x9c1 [<ffffffff8135b18e>] >> > > usb_add_hcd+0x225/0x69d [<ffffffff8136907b>] >> > > usb_hcd_pci_probe+0x270/0x3b1 [<ffffffff8125a8ad>] >> > > local_pci_probe+0x17/0x1b [<ffffffff8125b4c4>] >> > > pci_device_probe+0xcb/0xf7 [<ffffffff81307635>] >> > > driver_probe_device+0xf8/0x218 [<ffffffff813077ae>] >> > > __driver_attach+0x59/0x7d [<ffffffff813069e1>] >> > > bus_for_each_dev+0x54/0x83 [<ffffffff813073fd>] >> > > driver_attach+0x21/0x23 [<ffffffff81306487>] >> > > bus_add_driver+0xe1/0x26b [<ffffffff81307ad5>] >> > > driver_register+0xa3/0x11a [<ffffffff8125b71b>] >> > > __pci_register_driver+0x65/0xc2 [<ff >> > [-- Attachment #1.2: Type: text/html, Size: 96219 bytes --] [-- Attachment #2: CAPTURE.doc --] [-- Type: application/msword, Size: 11619 bytes --] [-- Attachment #3: Type: text/plain, Size: 137 bytes --] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-17 22:20 ` kishore kumar 2010-03-18 0:34 ` kishore kumar @ 2010-03-18 16:15 ` Pasi Kärkkäinen 2010-03-18 18:16 ` kishore kumar 1 sibling, 1 reply; 32+ messages in thread From: Pasi Kärkkäinen @ 2010-03-18 16:15 UTC (permalink / raw) To: kishore kumar; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore kumar wrote: > Here is the output of df -h and cat /etc/fstab of my machine. > Did you try both root=/dev/mapper/VolGroup01-LogVol00 and root=/dev/VolGroup01/LogVol00 arguments for the dom0 kernel? How did you generate the initrd image for the dom0 kernel? Anyway this sounds like a grub.conf or initrd problem, not Xen or pvops dom0 kernel kernel problem. -- Pasi > Please let me know your thoughts. > > [root@localhost kishore]# df -h > > Filesystem Size Used Avail Use% Mounted on > > /dev/mapper/VolGroup01-LogVol00 > > 223G 29G 182G 14% / > > /dev/sda1 99M 81M 13M 87% /boot > > tmpfs 757M 0 757M 0% /dev/shm > > [root@localhost kishore]# cat /etc/fstab > > /dev/VolGroup01/LogVol00 / ext3 defaults 1 1 > > LABEL=/boot /boot ext3 defaults 1 2 > > tmpfs /dev/shm tmpfs defaults 0 0 > > devpts /dev/pts devpts gid=5,mode=620 0 0 > > sysfs /sys sysfs defaults 0 0 > > proc /proc proc defaults 0 0 > > /dev/VolGroup01/LogVol01 swap swap defaults 0 0 > > [root@localhost kishore]# > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen <[1]pasik@iki.fi> wrote: > > On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore kumar wrote: > > I am not sure. Can you please let me know how to check this? any > command > > ?? > > well simple "df -h" will show it. and also "cat /etc/fstab". > You can also check it from your grub configuration.. from the working > baremetal (non-Xen) entry. > > -- Pasi > > > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi Kärkkäinen > <[1][2]pasik@iki.fi> wrote: > > > > On Tue, Mar 16, 2010 at 03:22:50PM -0700, kishore kumar wrote: > > > attached is the log captured in with the word document . > > > > > > > Scanning logical volumes > > Reading all physical volumes. This may take a while... > > Activating logical volumes > > Volume group "VolGroup01" not found > > Trying to resume from /dev/VolGroup01/LogVol01 > > Unable to access resume device (/dev/VolGroup01/LogVol01) > > Creating root device. > > Mounting root filesystem. > > mount: could not find filesystem '/dev/root' > > Setting up other filesystems. > > Setting up new root fs > > setuproot: moving /dev failed: No such file or directory > > no fstab.sys, mounting internal defaults > > setuproot: error mounting /proc: No such file or directory > > setuproot: error mounting /sys: No such file or directory > > Switching to new root and running init. > > unmounting old /dev > > unmounting old /proc > > unmounting old /sys > > switchroot: mount failed: No such file or directory > > init used greatest stack depth: 4088 bytes left > > Kernel panic - not syncing: Attempted to kill init! > > > > So it seems it gets all the way to executing the initrd image, > > which then fails to mount the root fs. > > > > Earlier in the log: > > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > > ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA, max UDMA/133 > > ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA > > ata1.00: configured for UDMA/133 > > scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO > PQ: 0 > > ANSI: 5 > > sd 0:0:0:0: Attached scsi generic sg0 type 0 > > sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 > GiB) > > sd 0:0:0:0: [sda] Write Protect is off > > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't > > support DPO or FUA > > sda: sda1 sda2 > > sd 0:0:0:0: [sda] Attached SCSI disk > > > > so /dev/sda was detected. Is your root lvm volume on /dev/sda ? > > Is /dev/VolGroup01/LogVol01 really your root fs? > > > > -- Pasi > > > > > > > > > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi Kärkkäinen > > <[1][2][3]pasik@iki.fi> wrote: > > > > > > On Tue, Mar 16, 2010 at 02:56:06PM -0700, kishore kumar > wrote: > > > > Please find the attached log file after fixing the > dom 0 > > kernel cmd > > > line > > > > as below > > > > > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 > > earlyprintk=xen > > > nomodeset > > > > > > > > > > There's something wrong with the log, the dom0 kernel > parts are > > all on > > > one line.. > > > It's really difficult to read it. > > > > > > -- Pasi > > > > > > > Thanks > > > > > > > > > > > > On Tue, Mar 16, 2010 at 2:29 PM, Pasi Kärkkäinen > > > <[1][2][3][4]pasik@iki.fi> wrote: > > > > > > > > On Tue, Mar 16, 2010 at 02:16:22PM -0700, kishore > kumar > > wrote: > > > > > I did below steps. > > > > > > > > > > > > > > > I pulled DOM 0 kernel from > > > > > git clone > > > > > > > > > > git://[1][2][3][4][5]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > linux-2.6-xen > > > > > > > > > > cd linux-2.6-xen > > > > > > > > > > make clean > > > > > > > > > > cp -a .config .config-old > > > > > > > > > > wget -O .config > > > > > > > > > > > > > > > [2][3][4][5][6]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > > > make oldconfig > > > > > > > > > > make bzImage > > > > > > > > > > make modules > > > > > > > > > > make modules_install > > > > > > > > > > cp -a .config /boot/config-2.6.32.9 > > > > > > > > > > cp -a System.map /boot/System.map-2.6.32.9 > > > > > > > > > > cp -a arch/x86/boot/bzImage > /boot/vmlinuz-2.6.32.9 > > > > > > > > > > and modified the grub.conf as below > > > > > > > > > > > > > > > Root(hd0,0) > > > > > > > > > > kernel /xen.gz console=vga,com1 > com1=115200,8n1 > > msi=1 > > > iommu=1 > > > > > > > > > > module /vmlinuz-2.6.32.9 ro > > root=/dev/VolGroup01/LogVo100 > > > rhgb > > > > quiet > > > > > > > > > > module /initrd-2.6.32.9.img > > > > > > > > > > > > > > > and rebooted the machine. Then It booted with > some > > xen > > > messages > > > > and > > > > > stopped. Those were the messages captured > from > > serial > > > console. > > > > > > > > > > Please let me know if I did something wrong > here. > > > > > > > > > > > > > Please fix the kernel cmdline based on my earlier > email, > > and > > > capture and > > > > post the > > > > serial console log again! > > > > > > > > -- Pasi > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 1:20 PM, Pasi > Kärkkäinen > > > > <[3][4][5][6][7]pasik@iki.fi> wrote: > > > > > > > > > > On Tue, Mar 16, 2010 at 01:16:28PM -0700, > Jeremy > > > Fitzhardinge > > > > wrote: > > > > > > On 03/16/2010 12:48 PM, Pasi Kärkkäinen > wrote: > > > > > >> On Tue, Mar 16, 2010 at 09:43:44PM +0200, > Pasi > > > Kärkkäinen > > > > wrote: > > > > > >> > > > > > >>> On Tue, Mar 16, 2010 at 10:32:17AM > -0700, > > kishore > > > kumar > > > > wrote: > > > > > >>> > > > > > >>>> Attached is the output captured > from > > serial > > > console. > > > > > >>>> > > > > > >>>> Machine does not boot after > compiling xen > > 3.4.3 > > > with > > > > pv_ops dom > > > > > 0 kernel. > > > > > >>>> > > > > > >>>> Please let me know what is going > wrong > > here. > > > > > >>>> > > > > > >>>> > > > > > >>> Ok this looks like a bug that is already > being > > sorted > > > out on > > > > > xen-devel mailinglist. > > > > > >>> I added CC to xen-devel. > > > > > >>> > > > > > >>> > > > > > >> > > > > > > > > > > > > Those messages are not a problem in > themselves, > > but the > > > related > > > > > problem > > > > > > is believed to be fixed in current > > xen/stable-2.6.32.x. > > > It > > > > looks like > > > > > > the output stops there because the Xen > console > > isn't set > > > up > > > > properly > > > > > for > > > > > > some reason. > > > > > > > > > > > > > > > > Yeah, remove "rhgb quiet" from the options.. > the > > dom0 > > > kernel > > > > cmdline > > > > > should be like this: > > > > > ro root=/dev/VolGroup01/LogVol00 > console=hvc0 > > > earlyprintk=xen > > > > nomodeset > > > > > -- Pasi > > > > > > > > > > References > > > > > > > > > > Visible links > > > > > 1. > > > > > > [5][6][7][8]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > 2. > > > > > > > > > > [6][7][8][9]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > 3. mailto:[7][8][9][10]pasik@iki.fi > > > > > > > > References > > > > > > > > Visible links > > > > 1. mailto:[9][10][11]pasik@iki.fi > > > > 2. > > > > > > [10][11][12]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > 3. > > > > > > [11][12][13]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > 4. mailto:[12][13][14]pasik@iki.fi > > > > 5. > > > > > > [13][14][15]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > 6. > > > > > > [14][15][16]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > 7. mailto:[15][16][17]pasik@iki.fi > > > > Asserting Post complete GPIO!!! > > > > Transfer control to CSM 16-bit binary for legacy boot > > > > __ __ _____ _ _ _____ _ _ > > > > \ \/ /___ _ __ |___ /| || | |___ / _ __ ___| || | > _ > > __ _ > > > __ ___ > > > > \ // _ \ '_ \ |_ \| || |_ |_ \ __| '__/ __| || > |_ __| > > '_ \| > > > '__/ _ \ > > > > / \ __/ | | | ___) |__ _| ___) |__| | | (__|__ > _|__| > > |_) | | > > > | __/ > > > > /_/\_\___|_| |_| |____(_) |_|(_)____/ |_| \___| |_| > | > > .__/|_| > > > \___| > > > > > |_| > > > > (XEN) Xen version 3.4.3-rc4-pre (kishore@localdomain) > (gcc > > version > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar 15 13:44:31 PDT > 2010 > > > > (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 2010 +0000 > > > 19924:6e72f8c3c017 > > > > (XEN) Command line: console=vga,com1 com1=115200,8n1 > msi=1 > > iommu=1 > > > > (XEN) Video information: > > > > (XEN) VGA is text mode 80x25, font 8x16 > > > > (XEN) VBE/DDC methods: none; EDID transfer time: 0 > seconds > > > > (XEN) EDID info not retrieved because no DDC retrieval > method > > > detected > > > > (XEN) Disc information: > > > > (XEN) Found 1 MBR signatures > > > > (XEN) Found 1 EDD information structures > > > > (XEN) Xen-e820 RAM map: > > > > (XEN) 0000000000000000 - 000000000009d000 (usable) > > > > (XEN) 000000000009d000 - 00000000000a0000 (reserved) > > > > (XEN) 00000000000e0000 - 0000000000100000 (reserved) > > > > (XEN) 0000000000100000 - 000000006d597000 (usable) > > > > (XEN) 000000006d597000 - 000000006d686000 (reserved) > > > > (XEN) 000000006d686000 - 000000006f598000 (usable) > > > > (XEN) 000000006f598000 - 000000006f59a000 (reserved) > > > > (XEN) 000000006f59a000 - 000000006f5af000 (ACPI NVS) > > > > (XEN) 000000006f5af000 - 000000006f5d9000 (reserved) > > > > (XEN) 000000006f5d9000 - 000000006f5f9000 (ACPI data) > > > > (XEN) 000000006f5f9000 - 000000006f6df000 (ACPI NVS) > > > > (XEN) 000000006f6df000 - 000000006f700000 (ACPI data) > > > > (XEN) 000000006f700000 - 0000000080000000 (reserved) > > > > (XEN) 00000000a0000000 - 00000000b0000000 (reserved) > > > > (XEN) 00000000fc000000 - 00000000fd000000 (reserved) > > > > (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) > > > > (XEN) 00000000ffc00000 - 0000000100000000 (reserved) > > > > (XEN) System RAM: 1780MB (1823000kB) > > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL ) > > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL THRLY > 0 > > > 1000013) > > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL THRLY > 0 > > MSFT > > > 100000D) > > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL THRLY > 3 > > MSFT > > > 100000D) > > > > (XEN) ACPI: FACS 6F5F9000, 0040 > > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL THRLY > 0 > > MSFT > > > 100000D) > > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL THRLY > 1 > > MSFT > > > 100000D) > > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL THRLY > 1 > > MSFT > > > 100000D) > > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL THRLY > 1 > > MSFT > > > 100000D) > > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL THRLY > 0 > > MSFT > > > 100000D) > > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 INTEL SSDT PM > 4000 > > INTL > > > 20061109) > > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL THRLY > 1 > > MSFT > > > 100000D) > > > > (XEN) Domain heap initialised > > > > (XEN) Processor #0 6:12 APIC version 21 > > > > (XEN) Processor #2 6:12 APIC version 21 > > > > (XEN) Processor #4 6:12 APIC version 21 > > > > (XEN) Processor #16 6:12 APIC version 21 > > > > (XEN) Processor #18 6:12 APIC version 21 > > > > (XEN) Processor #20 6:12 APIC version 21 > > > > (XEN) Processor #1 6:12 APIC version 21 > > > > (XEN) Processor #3 6:12 APIC version 21 > > > > (XEN) Processor #5 6:12 APIC version 21 > > > > (XEN) Processor #17 6:12 APIC version 21 > > > > (XEN) Processor #19 6:12 APIC version 21 > > > > (XEN) Processor #21 6:12 APIC version 21 > > > > (XEN) IOAPIC[0]: apic_id 8, version 32, address > 0xfec00000, GSI > > 0-23 > > > > (XEN) IOAPIC[1]: apic_id 9, version 32, address > 0xfec90000, GSI > > 24-47 > > > > (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs > > > > (XEN) Intel VT-d DMAR tables have been parsed. > > > > (XEN) Using scheduler: SMP Credit Scheduler (credit) > > > > (XEN) Detected 3200.207 MHz processor. > > > > (XEN) VMX: Supported advanced features: > > > > (XEN) - APIC MMIO access virtualisation > > > > (XEN) - APIC TPR shadow > > > > (XEN) - Extended Page Tables (EPT) > > > > (XEN) - Virtual-Processor Identifiers (VPID) > > > > (XEN) - Virtual NMI > > > > (XEN) - MSR direct-access bitmap > > > > (XEN) VMX: EPT is available. > > > > (XEN) VMX: VPID is available. > > > > (XEN) HVM: VMX enabled > > > > (XEN) HVM: Hardware Assisted Paging detected. > > > > (XEN) CPU0: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 1/2 eip 88000 > > > > (XEN) CPU1: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 2/4 eip 88000 > > > > (XEN) CPU2: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 3/16 eip 88000 > > > > (XEN) CPU3: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 4/18 eip 88000 > > > > (XEN) CPU4: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 5/20 eip 88000 > > > > (XEN) CPU5: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 6/1 eip 88000 > > > > (XEN) CPU6: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 7/3 eip 88000 > > > > (XEN) CPU7: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 8/5 eip 88000 > > > > (XEN) CPU8: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 9/17 eip 88000 > > > > (XEN) CPU9: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 10/19 eip 88000 > > > > (XEN) CPU10: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 11/21 eip 88000 > > > > (XEN) CPU11: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Total of 12 processors activated. > > > > (XEN) ENABLING IO-APIC IRQs > > > > (XEN) -> Using new ACK method > > > > (XEN) checking TSC synchronization across 12 CPUs: > passed. > > > > (XEN) Platform timer is 14.318MHz HPET > > > > ?(XEN) Brought up 12 CPUs > > > > (XEN) Intel VT-d Snoop Control supported. > > > > (XEN) Intel VT-d DMA Passthrough not supported. > > > > (XEN) Intel VT-d Queued Invalidation supported. > > > > (XEN) Intel VT-d Interrupt Remapping supported. > > > > (XEN) I/O virtualisation enabled > > > > (XEN) I/O virtualisation for PV guests disabled > > > > (XEN) xenoprof: Initialization failed. Intel processor > model 44 > > for P6 > > > class family is not supported > > > > (XEN) *** LOADING DOMAIN 0 *** > > > > (XEN) Xen kernel: 64-bit, lsb, compat32 > > > > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> > > 0x26bb000 > > > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > > > (XEN) Dom0 alloc.: 0000000064000000->0000000068000000 > > (404490 pages > > > to be allocated) > > > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > > > (XEN) Loaded kernel: ffffffff81000000->ffffffff826bb000 > > > > (XEN) Init. ramdisk: ffffffff826bb000->ffffffff82d0d800 > > > > (XEN) Phys-Mach map: ffffffff82d0e000->ffffffff83044050 > > > > (XEN) Start info: ffffffff83045000->ffffffff830454b4 > > > > (XEN) Page tables: ffffffff83046000->ffffffff83063000 > > > > (XEN) Boot stack: ffffffff83063000->ffffffff83064000 > > > > (XEN) TOTAL: ffffffff80000000->ffffffff83400000 > > > > (XEN) ENTRY ADDRESS: ffffffff819c1200 > > > > (XEN) Dom0 has maximum 12 VCPUs > > > > (XEN) Scrubbing Free RAM: .done. > > > > (XEN) Xen trace buffers: disabled > > > > (XEN) Std. Loglevel: Errors and warnings > > > > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and > > warnings) > > > > (XEN) Xen is relinquishing VGA console. > > > > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three > times to > > switch > > > input to Xen) > > > > (XEN) Freed 128kB init memory. > > > > mapping kernel into physical memory > > > > Xen: setup ISA identity maps > > > > about to get started... > > > > Initializing cgroup subsys cpuset > > > > Initializing cgroup subsys cpu > > > > Linux version 2.6.32.9 (kishore@localhost.localdomain) > (gcc > > version > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 15 > 15:16:28 PDT > > 2010 > > > > Command line: ro root=/dev/VolGroup01/LogVol00 > console=hvc0 > > > earlyprintk=xen nomodeset > > > > KERNEL supported cpus: > > > > Intel GenuineIntel > > > > AMD AuthenticAMD > > > > Centaur CentaurHauls > > > > BIOS-provided physical RAM map: > > > > Xen: 0000000000000000 - 000000000009d000 (usable) > > > > Xen: 000000000009d000 - 0000000000100000 (reserved) > > > > Xen: 0000000000100000 - 0000000066c0a000 (usable) > > > > Xen: 000000006d597000 - 000000006d686000 (reserved) > > > > Xen: 000000006f598000 - 000000006f59a000 (reserved) > > > > Xen: 000000006f59a000 - 000000006f5af000 (ACPI NVS) > > > > Xen: 000000006f5af000 - 000000006f5d9000 (reserved) > > > > Xen: 000000006f5d9000 - 000000006f5f9000 (ACPI data) > > > > Xen: 000000006f5f9000 - 000000006f6df000 (ACPI NVS) > > > > Xen: 000000006f6df000 - 000000006f700000 (ACPI data) > > > > Xen: 000000006f700000 - 0000000080000000 (reserved) > > > > Xen: 00000000a0000000 - 00000000b0000000 (reserved) > > > > Xen: 00000000fc000000 - 00000000fd000000 (reserved) > > > > Xen: 00000000fed1c000 - 00000000fed20000 (reserved) > > > > Xen: 00000000ffc00000 - 0000000100000000 (reserved) > > > > bootconsole [xenboot0] enabled > > > > DMI 2.4 present. > > > > last_pfn = 0x66c0a max_arch_pfn = 0x400000000 > > > > init_memory_mapping: 0000000000000000-0000000066c0a000 > > > > RAMDISK: 026bb000 - 02d0d800 > > > > ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL ) > > > > ACPI: XSDT 000000006f6fe120 00064 (v01 INTEL THRLY > 00000000 > > > 01000013) > > > > ACPI: FACP 000000006f6fd000 000F4 (v04 INTEL THRLY > 00000000 > > MSFT > > > 0100000D) > > > > ACPI: DSDT 000000006f6f5000 074F1 (v02 INTEL THRLY > 00000003 > > MSFT > > > 0100000D) > > > > ACPI: FACS 000000006f5f9000 00040 > > > > ACPI: APIC 000000006f6f4000 001CC (v02 INTEL THRLY > 00000000 > > MSFT > > > 0100000D) > > > > ACPI: MCFG 000000006f6f3000 0003C (v01 INTEL THRLY > 00000001 > > MSFT > > > 0100000D) > > > > ACPI: HPET 000000006f6f2000 00038 (v01 INTEL THRLY > 00000001 > > MSFT > > > 0100000D) > > > > ACPI: SLIT 000000006f6f1000 00030 (v01 INTEL THRLY > 00000001 > > MSFT > > > 0100000D) > > > > ACPI: WDDT 000000006f6f0000 00040 (v01 INTEL THRLY > 00000000 > > MSFT > > > 0100000D) > > > > ACPI: SSDT 000000006f5d9000 1FDDC (v01 INTEL SSDT PM > 00004000 > > INTL > > > 20061109) > > > > ACPI: 000000006f6ee000 001D0 (v01 INTEL THRLY > 00000001 > > MSFT > > > 0100000D) > > > > No NUMA configuration found > > > > Faking a node at 0000000000000000-0000000066c0a000 > > > > Bootmem setup node 0 0000000000000000-0000000066c0a000 > > > > NODE_DATA [0000000000008000 - 000000000001ffff] > > > > bootmap [0000000000020000 - 000000000002cd87] pages d > > > > (9 early reservations) ==> bootmem [0000000000 - > 0066c0a000] > > > > #0 [0000000000 - 0000001000] BIOS data page ==> > [0000000000 > > - > > > 0000001000] > > > > #1 [0003046000 - 0003063000] XEN PAGETABLES ==> > [0003046000 > > - > > > 0003063000] > > > > #2 [0000006000 - 0000008000] TRAMPOLINE ==> > [0000006000 > > - > > > 0000008000] > > > > #3 [0001000000 - 000269ae98] TEXT DATA BSS ==> > [0001000000 > > - > > > 000269ae98] > > > > #4 [00026bb000 - 0002d0d800] RAMDISK ==> > [00026bb000 > > - > > > 0002d0d800] > > > > #5 [0002d0e000 - 0003046000] XEN START INFO ==> > [0002d0e000 > > - > > > 0003046000] > > > > #6 [000269b000 - 000269b011] BRK ==> > [000269b000 > > - > > > 000269b011] > > > > #7 [0000100000 - 000041a000] PGTABLE ==> > [0000100000 > > - > > > 000041a000] > > > > #8 [0000001000 - 0000001030] ACPI SLIT ==> > [0000001000 > > - > > > 0000001030] > > > > found SMP MP-table at [ffff8800000fd750] fd750 > > > > Zone PFN ranges: > > > > DMA 0x00000000 -> 0x00001000 > > > > DMA32 0x00001000 -> 0x00100000 > > > > Normal 0x00100000 -> 0x00100000 > > > > Movable zone start PFN for each node > > > > early_node_map[2] active PFN ranges > > > > 0: 0x00000000 -> 0x0000009d > > > > 0: 0x00000100 -> 0x00066c0a > > > > ACPI: PM-Timer IO Port: 0x408 > > > > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > > > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) > > > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) > > > > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled) > > > > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled) > > > > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) > > > > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] enabled) > > > > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) > > > > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] enabled) > > > > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled) > > > > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled) > > > > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled) > > > > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) > > > > ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1]) > > > > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > > > > IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI > 0-0 > > > > ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24]) > > > > IOAPIC[1]: apic_id 9, version 0, address 0xfec90000, GSI > 24-24 > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > > > ERROR: Unable to locate IOAPIC for GSI 2 > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high > level) > > > > ERROR: Unable to locate IOAPIC for GSI 9 > > > > Using ACPI (MADT) for SMP configuration information > > > > ACPI: HPET id: 0x8086a401 base: 0xfed00000 > > > > SMP: Allowing 12 CPUs, 0 hotplug CPUs > > > > PM: Registered nosave memory: 000000000009d000 - > > 0000000000100000 > > > > Allocating PCI resources starting at b0000000 (gap: > > b0000000:4c000000) > > > > Booting paravirtualized kernel on Xen > > > > Xen version: 3.4.3-rc4-pre (preserve-AD) (dom0) > > > > NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 > nr_node_ids:1 > > > > PERCPU: Embedded 478 pages/cpu @ffff880005ebc000 > s1928024 r8192 > > d21672 > > > u1957888 > > > > pcpu-alloc: s1928024 r8192 d21672 u1957888 > alloc=478*4096 > > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 > [0] 06 > > [0] 07 > > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 > > > > Xen: using vcpu_info placement > > > > Built 1 zonelists in Node order, mobility grouping on. > Total > > pages: > > > 409291 > > > > Policy zone: DMA32 > > > > Kernel command line: ro root=/dev/VolGroup01/LogVol00 > > console=hvc0 > > > earlyprintk=xen nomodeset > > > > PID hash table entries: 4096 (order: 3, 32768 bytes) > > > > Initializing CPU#0 > > > > DMA: Placing 64MB software IO TLB between > ffff880007525000 - > > > ffff88000b525000 > > > > DMA: software IO TLB at phys 0x7525000 - 0xb525000 > > > > xen_swiotlb_fixup: buf=ffff880007525000 size=67108864 > > > > xen_swiotlb_fixup: buf=ffff88000b585000 size=32768 > > > > Memory: 1514268k/1683496k available (4654k kernel code, > 396k > > absent, > > > 168832k reserved, 3443k data, 3396k init) > > > > SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, > > CPUs=12, > > > Nodes=1 > > > > Hierarchical RCU implementation. > > > > NR_IRQS:4352 nr_irqs:3072 > > > > Already setup the GSI :0 > > > > Already setup the GSI :1 > > > > Already setup the GSI :2 > > > > Already setup the GSI :3 > > > > Already setup the GSI :4 > > > > Already setup the GSI :5 > > > > Already setup the GSI :6 > > > > Already setup the GSI :7 > > > > Already setup the GSI :8 > > > > Already setup the GSI :9 > > > > Already setup the GSI :10 > > > > Already setup the GSI :11 > > > > Already setup the GSI :12 > > > > Already setup the GSI :13 > > > > Already setup the GSI :14 > > > > Already setup the GSI :15 > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high > level) > > > > xen: sci override: source_irq=9 global_irq=9 trigger=c > > polarity=1 > > > > xen_allocate_pirq: returning irq 9 for gsi 9 > > > > Already setup the GSI :9 > > > > xen: acpi sci 9 > > > > Console: colour VGA+ 80x25 > > > > console [hvc0] enabled, bootconsole disabled console > [hvc0] > > enabled, > > > bootconsole disabled > > > > Lock dependency validator: Copyright (c) 2006 Red Hat, > Inc., > > Ingo > > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: > > 48 > > > ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: > > 4096 ... > > > MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: > 32768 > > ... > > > CHAINHASH_SIZE: 16384 memory used by lock > dependency > > info: > > > 6367 kB per task-struct memory footprint: 2688 bytes > allocated > > 17039360 > > > bytes of page_cgroup please try 'cgroup_disable=memory' > option if > > you > > > don't want memory cgroups installing Xen timer for CPU 0 > Detected > > > 3200.206 MHz processor. Calibrating delay loop (skipped), > value > > > calculated using timer frequency.. 6400.41 BogoMIPS > (lpj=3200206) > > > Security Framework initialized SELinux: Initializing. > Dentry > > cache hash > > > table entries: 262144 (order: 9, 2097152 bytes) > Inode-cache hash > > table > > > entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash > table > > > entries: 256 Initializing cgroup subsys ns Initializing > cgroup > > subsys > > > cpuacct Initializing cgroup subsys memory Initializing > cgroup > > subsys > > > devices Initializing cgroup subsys freezer Initializing > cgroup > > subsys > > > net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 > cache: 256K > > CPU: > > > L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU: Unsupported > number of > > siblings > > > 32 Performance Events: unsupported p6 CPU model 44 no PMU > driver, > > > software events only. lockdep: fixing up alternatives. SMP > > alternatives: > > > switching to UP code ACPI: Core revision 20090903 ftrace: > > converting > > > mcount calls to 0f 1f 44 00 00 ftrace: allocating 27971 > entries > > in 110 > > > pages installing Xen timer for CPU 1 lockdep: fixing up > > alternatives. > > > SMP alternatives: switching to SMP code Initializing CPU#1 > CPU: > > L1 I > > > cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 > cache: > > 12288K > > > CPU 1/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > > installing > > > Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I cache: > 32K, L1 D > > cache: > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 2/0x0 -> > Node 0 > > CPU: > > > Unsupported number of siblings 32 installing Xen timer for > CPU 3 > > > Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 > > cache: > > > 256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node 0 CPU: > Unsupported > > number > > > of siblings 32 installing Xen timer for CPU 4 Initializing > CPU#4 > > CPU: L1 > > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 > cache: > > 12288K > > > CPU 4/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > > installing > > > Xen timer for CPU 5 Initializing CPU#5 CPU: L1 I cache: > 32K, L1 D > > cache: > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 5/0x0 -> > Node 0 > > CPU: > > > Unsupported number of siblings 32 installing Xen timer for > CPU 6 > > > Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 > > cache: > > > 256K CPU: L3 cache: 12288K CPU 6/0x0 -> Node 0 CPU: > Unsupported > > number > > > of siblings 32 installing Xen timer for CPU 7 Initializing > CPU#7 > > CPU: L1 > > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 > cache: > > 12288K > > > CPU 7/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > > installing > > > Xen timer for CPU 8 Initializing CPU#8 CPU: L1 I cache: > 32K, L1 D > > cache: > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 8/0x0 -> > Node 0 > > CPU: > > > Unsupported number of siblings 32 installing Xen timer for > CPU 9 > > > Initializing CPU#9 CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 > > cache: > > > 256K CPU: L3 cache: 12288K CPU 9/0x0 -> Node 0 CPU: > Unsupported > > number > > > of siblings 32 installing Xen timer for CPU 10 > Initializing > > CPU#10 CPU: > > > L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: > L3 > > cache: > > > 12288K CPU 10/0x0 -> Node 0 CPU: Unsupported number of > siblings > > 32 > > > installing Xen timer for CPU 11 Initializing CPU#11 CPU: > L1 I > > cache: > > > 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: > 12288K > > CPU > > > 11/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > Brought > > up 12 > > > CPUs Grant table initialized regulator: core version 0.5 > Time: > > 14:45:00 > > > Date: 03/16/10 NET: Registered protocol family 16 > > xenbus_probe_init ok > > > ACPI FADT declares the system doesn't support PCIe ASPM, > so > > disable it > > > ACPI: bus type pci registered PCI: MCFG configuration 0: > base > > a0000000 > > > segment 0 buses 0 - 255 PCI: MCFG area at a0000000 > reserved in > > E820 PCI: > > > Using MMCONFIG at a0000000 - afffffff PCI: Using > configuration > > type 1 > > > for base access bio: create slab <bio-0> at 0 ACPI Error: > Field > > [CPB3] > > > at 96 exceeds Buffer [NULL] size 64 (bits) > > (20090903/dsopcode-596) ACPI > > > Error (psparse-0537): Method parse/execution failed > [\_SB_._OSC] > > (Node > > > ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI: Interpreter > enabled > > ACPI: > > > (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt > > routing ACPI > > > Warning: Incorrect checksum in table [ ] - 97, should > be DB > > > (20090903/tbutils-314) ACPI: No dock devices found. ACPI: > PCI > > Root > > > Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported > from D0 > > D3hot > > > D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: > PME# > > supported > > > from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci > > 0000:00:03.0: > > > PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# > > disabled pci > > > 0000:00:04.0: PME# supported from D0 D3hot D3cold pci > > 0000:00:04.0: PME# > > > disabled pci 0000:00:05.0: PME# supported from D0 D3hot > D3cold > > pci > > > 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# > supported from > > D0 > > > D3hot D3cold pci 0000:00:06.0: PME# disabled pci > 0000:00:07.0: > > PME# > > > supported from D0 D3hot D3cold pci 0000:00:07.0: PME# > disabled > > pci > > > 0000:00:08.0: PME# supported from D0 D3hot D3cold pci > > 0000:00:08.0: PME# > > > disabled pci 0000:00:09.0: PME# supported from D0 D3hot > D3cold > > pci > > > 0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME# > supported from > > D0 > > > D3hot D3cold pci 0000:00:0a.0: PME# disabled pci > 0000:00:13.0: > > PME# > > > supported from D0 D3hot D3cold pci 0000:00:13.0: PME# > disabled > > pci > > > 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci > > 0000:00:1a.7: PME# > > > disabled pci 0000:00:1c.0: PME# supported from D0 D3hot > D3cold > > pci > > > 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# > supported from > > D0 > > > D3hot D3cold pci 0000:00:1c.4: PME# disabled pci > 0000:00:1c.5: > > PME# > > > supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# > disabled > > pci > > > 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci > > 0000:00:1d.7: PME# > > > disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed > by > > ICH6 > > > ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f > claimed > > by ICH6 > > > GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at > 0680 > > (mask > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO > at 0ca0 > > (mask > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO > at 0600 > > (mask > > > 001f) pci 0000:00:1f.2: PME# supported from D3hot pci > > 0000:00:1f.2: PME# > > > disabled pci 0000:01:00.0: PME# supported from D0 D3hot > D3cold > > pci > > > 0000:01:00.0: PME# disabled pci 0000:01:00.1: PME# > supported from > > D0 > > > D3hot D3cold pci 0000:01:00.1: PME# disabled pci > 0000:0c:00.0: > > disabling > > > ASPM on pre-1.1 PCIe device. You can enable it with > > 'pcie_aspm=force' > > > pci 0000:00:1e.0: transparent bridge ACPI: PCI Root Bridge > [PCI1] > > > (0000:fe) ACPI: PCI Root Bridge [PCI2] (0000:ff) ACPI: PCI > > Interrupt > > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI > > Interrupt Link > > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI > Interrupt > > Link > > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI > Interrupt > > Link > > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI > Interrupt > > Link > > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. > ACPI: PCI > > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > ACPI: > > PCI > > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) > *0, > > disabled. > > > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 > 12 14 > > 15) > > > xenbus_probe_backend_init bus registered ok > > xenbus_probe_frontend_init > > > bus registered ok xen_balloon: Initialising balloon driver > with > > page > > > order 0. vgaarb: device added: > > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none > vgaarb: > > loaded > > > SCSI subsystem initialized usbcore: registered new > interface > > driver > > > usbfs usbcore: registered new interface driver hub > usbcore: > > registered > > > new device driver usb PCI: Using ACPI for IRQ routing > NetLabel: > > > Initializing NetLabel: domain hash size = 128 NetLabel: > > protocols = > > > UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by > default > > > Switching to clocksource xen kstop/0 used greatest stack > depth: > > 6568 > > > bytes left kstop/1 used greatest stack depth: 6536 bytes > left > > pnp: PnP > > > ACPI init ACPI: bus type pnp registered xen_allocate_pirq: > > returning irq > > > 8 for gsi 8 Already setup the GSI :8 xen_allocate_pirq: > returning > > irq 13 > > > for gsi 13 Already setup the GSI :13 pnp: PnP ACPI: found > 13 > > devices > > > ACPI: ACPI bus type pnp unregistered system 00:07: ioport > range > > > 0x500-0x53f has been reserved system 00:07: ioport range > > 0x400-0x47f has > > > been reserved system 00:07: ioport range 0x800-0x81f has > been > > reserved > > > system 00:07: ioport range 0x2f8-0x2ff has been reserved > system > > 00:07: > > > iomem range 0xfed1c000-0xfed8bffe could not be reserved > system > > 00:07: > > > iomem range 0xff000000-0xffffffff could not be reserved > system > > 00:07: > > > iomem range 0xfee00000-0xfeefffff has been reserved system > 00:07: > > iomem > > > range 0xfe900000-0xfe90001f has been reserved system > 00:07: iomem > > range > > > 0xfea00000-0xfea0001f has been reserved system 00:07: > iomem range > > > 0xfed1b000-0xfed1bfff has been reserved pci 0000:0c:00.0: > BAR 6: > > no > > > parent found for of device [0xffff0000-0xffffffff] pci > > 0000:00:01.0: PCI > > > bridge, secondary bus 0000:01 pci 0000:00:01.0: IO > window: > > > 0x1000-0x1fff pci 0000:00:01.0: MEM window: > > 0xb1900000-0xb19fffff pci > > > 0000:00:01.0: PREFETCH window: disabled pci > 0000:00:02.0: PCI > > bridge, > > > secondary bus 0000:02 pci 0000:00:02.0: IO window: > disabled pci > > > 0000:00:02.0: MEM window: disabled pci 0000:00:02.0: > PREFETCH > > > window: disabled pci 0000:00:03.0: PCI bridge, secondary > bus > > 0000:03 pci > > > 0000:00:03.0: IO window: disabled pci 0000:00:03.0: > MEM > > window: > > > disabled pci 0000:00:03.0: PREFETCH window: disabled pci > > 0000:00:04.0: > > > PCI bridge, secondary bus 0000:04 pci 0000:00:04.0: IO > window: > > > disabled pci 0000:00:04.0: MEM window: disabled pci > > 0000:00:04.0: > > > PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, > secondary > > bus > > > 0000:05 pci 0000:00:05.0: IO window: disabled pci > 0000:00:05.0: > > MEM > > > window: disabled pci 0000:00:05.0: PREFETCH window: > disabled > > pci > > > 0000:00:06.0: PCI bridge, secondary bus 0000:06 pci > 0000:00:06.0: > > IO > > > window: disabled pci 0000:00:06.0: MEM window: disabled > pci > > > 0000:00:06.0: PREFETCH window: disabled pci > 0000:00:07.0: PCI > > bridge, > > > secondary bus 0000:07 pci 0000:00:07.0: IO window: > disabled pci > > > 0000:00:07.0: MEM window: disabled pci 0000:00:07.0: > PREFETCH > > > window: disabled pci 0000:00:08.0: PCI bridge, secondary > bus > > 0000:08 pci > > > 0000:00:08.0: IO window: disabled pci 0000:00:08.0: > MEM > > window: > > > disabled pci 0000:00:08.0: PREFETCH window: disabled pci > > 0000:00:09.0: > > > PCI bridge, secondary bus 0000:09 pci 0000:00:09.0: IO > window: > > > 0x3000-0x3fff pci 0000:00:09.0: MEM window: > > 0xb1b00000-0xb1cfffff pci > > > 0000:00:09.0: PREFETCH window: > > 0x000000b1d00000-0x000000b1efffff pci > > > 0000:00:0a.0: PCI bridge, secondary bus 0000:0a pci > 0000:00:0a.0: > > IO > > > window: disabled pci 0000:00:0a.0: MEM window: disabled > pci > > > 0000:00:0a.0: PREFETCH window: disabled pci > 0000:00:1c.0: PCI > > bridge, > > > secondary bus 0000:0b pci 0000:00:1c.0: IO window: > disabled pci > > > 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: > PREFETCH > > > window: disabled pci 0000:00:1c.4: PCI bridge, secondary > bus > > 0000:0c pci > > > 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: > MEM > > window: > > > 0xb1000000-0xb18fffff pci 0000:00:1c.4: PREFETCH window: > > > 0x000000b0000000-0x000000b0ffffff pci 0000:00:1c.5: PCI > bridge, > > > secondary bus 0000:0d pci 0000:00:1c.5: IO window: > disabled pci > > > 0000:00:1c.5: MEM window: disabled pci 0000:00:1c.5: > PREFETCH > > > window: disabled pci 0000:00:1e.0: PCI bridge, secondary > bus > > 0000:0e pci > > > 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: > MEM > > window: > > > disabled pci 0000:00:1e.0: PREFETCH window: disabled pci > > 0000:00:01.0: > > > PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci > 0000:00:02.0: PCI > > INT A > > > -> GSI 29 (level, low) -> IRQ 29 pci 0000:00:03.0: PCI INT > A -> > > GSI 24 > > > (level, low) -> IRQ 24 pci 0000:00:04.0: PCI INT A -> GSI > 25 > > (level, > > > low) -> IRQ 25 pci 0000:00:05.0: PCI INT A -> GSI 26 > (level, low) > > -> IRQ > > > 26 pci 0000:00:06.0: PCI INT A -> GSI 27 (level, low) -> > IRQ 27 > > pci > > > 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 > pci > > > 0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 > pci > > > 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 > pci > > > 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 > pci > > > 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > > xen_allocate_pirq: returning irq 16 for gsi 16 Already > setup the > > GSI :16 > > > pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ > 16 pci > > > 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > NET: > > Registered > > > protocol family 2 IP route cache hash table entries: 65536 > > (order: 7, > > > 524288 bytes) TCP established hash table entries: 262144 > (order: > > 10, > > > 4194304 bytes) TCP bind hash table entries: 65536 (order: > 10, > > 4718592 > > > bytes) TCP: Hash tables configured (established 262144 > bind > > 65536) TCP > > > reno registered NET: Registered protocol family 1 pci > > 0000:01:00.0: > > > Disabling L0s pci 0000:01:00.1: Disabling L0s Trying to > unpack > > rootfs > > > image as initramfs... Freeing initrd memory: 6474k freed > DMA-API: > > > preallocated 32768 debug entries DMA-API: debugging > enabled by > > kernel > > > config PCI-DMA: Using software bounce buffering for IO > (SWIOTLB) > > DMA: > > > Placing 64MB software IO TLB between ffff880007525000 - > > ffff88000b525000 > > > DMA: software IO TLB at phys 0x7525000 - 0xb525000 audit: > > initializing > > > netlink socket (disabled) type=2000 > audit(1268750702.035:1): > > initialized > > > HugeTLB registered 2 MB page size, pre-allocated 0 pages > VFS: > > Disk > > > quotas dquot_6.5.2 Dquot-cache hash table entries: 512 > (order 0, > > 4096 > > > bytes) msgmni has been set to 2970 cryptomgr_test used > greatest > > stack > > > depth: 5864 bytes left cryptomgr_test used greatest stack > depth: > > 5816 > > > bytes left alg: No test for stdrng (krng) Block layer SCSI > > generic (bsg) > > > driver version 0.4 loaded (major 252) io scheduler noop > > registered io > > > scheduler anticipatory registered io scheduler deadline > > registered io > > > scheduler cfq registered (default) pci_hotplug: PCI Hot > Plug PCI > > Core > > > version: 0.5 pciehp 0000:00:09.0:pcie04: HPC vendor_id > 8086 > > device_id > > > 3410 ss_vid 0 ss_did 0 pciehp: PCI Express Hot Plug > Controller > > Driver > > > version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver > > version: 0.5 > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > pci-stub: invalid id string "" input: Sleep Button as > > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 > ACPI: > > Sleep > > > Button [SLPB] input: Power Button as > > > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power > Button > > [PWRF] > > > registering netback hpet_acpi_add: no address or irqs in > _CRS > > > Non-volatile memory driver v1.3 Linux agpgart interface > v0.103 > > Serial: > > > 8250/16550 driver, 4 ports, IRQ sharing enabled > serial8250: ttyS1 > > at I/O > > > 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: > module > > loaded > > > input: Macintosh mouse button emulation as > > /devices/virtual/input/input2 > > > ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ > 19 > > ahci > > > 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f > impl > > SATA mode > > > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio > slum part > > ccc > > > ems scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci > scsi4 : > > ahci > > > scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, > > connection > > > status changed irq 2996 ata2: SATA max UDMA/133 abar > > m2048@0xb1a00000 > > > port 0xb1a00180 irq 2996 ata3: SATA max UDMA/133 abar > > m2048@0xb1a00000 > > > port 0xb1a00200 irq 2996 ata4: SATA max UDMA/133 abar > > m2048@0xb1a00000 > > > port 0xb1a00280 irq 2996 ata5: SATA max UDMA/133 abar > > m2048@0xb1a00000 > > > port 0xb1a00300 irq 2996 ata6: SATA max UDMA/133 abar > > m2048@0xb1a00000 > > > port 0xb1a00380 irq 2996 Fixed MDIO Bus: probed ehci_hcd: > USB 2.0 > > > 'Enhanced' Host Controller (EHCI) Driver ehci_hcd > 0000:00:1a.7: > > PCI INT > > > C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: > EHCI > > Host > > > Controller ehci_hcd 0000:00:1a.7: new USB bus registered, > > assigned bus > > > number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd > > 0000:00:1a.7: irq > > > 18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7: USB 2.0 > started, > > EHCI 1.00 > > > usb usb1: New USB device found, idVendor=1d6b, > idProduct=0002 usb > > usb1: > > > New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb > > usb1: > > > Product: EHCI Host Controller usb usb1: Manufacturer: > Linux > > 2.6.32.9 > > > ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: > > configuration #1 > > > chosen from 1 choice hub 1-0:1.0: USB hub found hub > 1-0:1.0: 6 > > ports > > > detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 > (level, low) > > -> IRQ > > > 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd > > 0000:00:1d.7: > > > new USB bus registered, assigned bus number 2 ehci_hcd > > 0000:00:1d.7: > > > debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem > 0xb1a01000 > > ehci_hcd > > > 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB > device > > found, > > > idVendor=1d6b, idProduct=0002 usb usb2: New USB device > strings: > > Mfr=3, > > > Product=2, SerialNumber=1 usb usb2: Product: EHCI Host > Controller > > usb > > > usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd usb usb2: > > SerialNumber: > > > 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 > choice hub > > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected > ohci_hcd: > > USB 1.1 > > > 'Open' Host Controller (OHCI) Driver uhci_hcd: USB > Universal Host > > > Controller Interface driver xen_allocate_pirq: returning > irq 16 > > for gsi > > > 16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0: PCI > INT A -> > > GSI 16 > > > (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: UHCI Host > > Controller > > > uhci_hcd 0000:00:1a.0: new USB bus registered, assigned > bus > > number 3 > > > uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020e0 usb > usb3: New > > USB > > > device found, idVendor=1d6b, idProduct=0001 usb usb3: New > USB > > device > > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: > Product: UHCI > > Host > > > Controller usb usb3: Manufacturer: Linux 2.6.32.9 uhci_hcd > usb > > usb3: > > > SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 > chosen from > > 1 > > > choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports > detected > > uhci_hcd > > > 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd > > > 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: > new USB > > bus > > > registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: > irq 21, > > io base > > > 0x000020c0 usb usb4: New USB device found, idVendor=1d6b, > > idProduct=0001 > > > usb usb4: New USB device strings: Mfr=3, Product=2, > > SerialNumber=1 usb > > > usb4: Product: UHCI Host Controller usb usb4: > Manufacturer: Linux > > > 2.6.32.9 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb > usb4: > > > configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub > found > > hub > > > 4-0:1.0: 2 ports detected xen_allocate_pirq: returning irq > 19 for > > gsi 19 > > > Already setup the GSI :19 uhci_hcd 0000:00:1a.2: PCI INT D > -> GSI > > 19 > > > (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: UHCI Host > > Controller > > > uhci_hcd 0000:00:1a.2: new USB bus registered, assigned > bus > > number 5 > > > uhci_hcd 0000:00:1a.2: irq 19, io base 0x000020a0 usb > usb5: New > > USB > > > device found, idVendor=1d6b, idProduct=0001 usb usb5: New > USB > > device > > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: > Product: UHCI > > Host > > > Controller usb usb5: Manufacturer: Linux 2.6.32.9 uhci_hcd > usb > > usb5: > > > SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 > chosen from > > 1 > > > choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports > detected > > > xen_allocate_pirq: returning irq 23 for gsi 23 Already > setup the > > GSI :23 > > > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> > IRQ 23 > > > uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd > > 0000:00:1d.0: new > > > USB bus registered, assigned bus number 6 uhci_hcd > 0000:00:1d.0: > > irq 23, > > > io base 0x00002080 usb usb6: New USB device found, > idVendor=1d6b, > > > idProduct=0001 usb usb6: New USB device strings: Mfr=3, > > Product=2, > > > SerialNumber=1 usb usb6: Product: UHCI Host Controller usb > usb6: > > > Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb6: > SerialNumber: > > > 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 > choice hub > > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected > > xen_allocate_pirq: > > > returning irq 19 for gsi 19 Already setup the GSI :19 > uhci_hcd > > > 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd > > > 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: > new USB > > bus > > > registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: > irq 19, > > io base > > > 0x00002060 usb usb7: New USB device found, idVendor=1d6b, > > idProduct=0001 > > > usb usb7: New USB device strings: Mfr=3, Product=2, > > SerialNumber=1 usb > > > usb7: Product: UHCI Host Controller usb usb7: > Manufacturer: Linux > > > 2.6.32.9 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb > usb7: > > > configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub > found > > hub > > > 7-0:1.0: 2 ports detected xen_allocate_pirq: returning irq > 18 for > > gsi 18 > > > Already setup the GSI :18 uhci_hcd 0000:00:1d.2: PCI INT C > -> GSI > > 18 > > > (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI Host > > Controller > > > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned > bus > > number 8 > > > uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb > usb8: New > > USB > > > device found, idVendor=1d6b, idProduct=0001 usb usb8: New > USB > > device > > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: > Product: UHCI > > Host > > > Controller usb usb8: Manufacturer: Linux 2.6.32.9 uhci_hcd > usb > > usb8: > > > SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 > chosen from > > 1 > > > choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports > detected > > PNP: No > > > PS/2 controller found. Probing ports directly. i8042.c: No > > controller > > > found. mice: PS/2 mouse device common for all mice > rtc_cmos > > 00:03: RTC > > > can wake from S4 rtc_cmos 00:03: rtc core: registered > rtc_cmos as > > rtc0 > > > rtc0: alarms up to one month, y3k, 114 bytes nvram > device-mapper: > > > uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl > > (2009-04-01) > > > initialised: [16][17][18]dm-devel@redhat.com cpuidle: > using governor > > ladder > > > cpuidle: using governor menu usbcore: registered new > interface > > driver > > > hiddev usbcore: registered new interface driver usbhid > usbhid: > > v2.6:USB > > > HID core driver nf_conntrack version 0.5.0 (16384 buckets, > 65536 > > max) > > > CONFIG_NF_CT_ACCT is deprecated and will be removed soon. > Please > > use > > > nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack > module > > option > > > or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. > > ip_tables: (C) > > > 2000-2006 Netfilter Core Team TCP cubic registered > Initializing > > XFRM > > > netlink socket NET: Registered protocol family 17 > registered > > taskstats > > > version 1 No TPM chip found, activating TPM-bypass! > Magic > > number: > > > 2:902:788 pci 0000:00:16.6: hash matches rtc_cmos 00:03: > setting > > system > > > clock to 2010-03-16 14:45:05 UTC (1268750705) Initalizing > network > > drop > > > monitor service ata2: SATA link down (SStatus 0 SControl > 300) > > ata4: SATA > > > link down (SStatus 0 SControl 300) ata6: SATA link down > (SStatus > > 0 > > > SControl 300) ata5: SATA link down (SStatus 0 SControl > 300) ata3: > > SATA > > > link down (SStatus 0 SControl 300) usb 7-1: new low speed > USB > > device > > > using uhci_hcd and address 2 > > > ====================================================== [ > INFO: > > > SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] > 2.6.32.9 #1 > > > ------------------------------------------------------ > khubd/100 > > > [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: > > (&retval->lock){......}, > > > at: [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 and > this task > > is > > > already holding: (&uhci->lock){..-...}, at: > [<ffffffff8137aedd>] > > > uhci_urb_enqueue+0x46/0x7e3 which would create a new lock > > dependency: > > > (&uhci->lock){..-...} -> (&retval->lock){......} but > this new > > > dependency connects a SOFTIRQ-irq-safe lock: > > (&uhci->lock){..-...} ... > > > which became SOFTIRQ-irq-safe at: [<ffffffff8108ea6d>] > > > __lock_acquire+0x2d2/0xc07 [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 > > > [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 > > > [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c > > > [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a > > > [<ffffffff8135a479>] rh_timer_func+0xe/0x10 > > [<ffffffff810693bd>] > > > run_timer_softirq+0x1a6/0x257 [<ffffffff810627e4>] > > > __do_softirq+0xe6/0x1bc [<ffffffff81013fac>] > > call_softirq+0x1c/0x30 > > > [<ffffffff81015794>] do_softirq+0x4b/0xa7 > [<ffffffff81062229>] > > > irq_exit+0x4a/0x89 [<ffffffff812bf9d9>] > > > xen_evtchn_do_upcall+0x156/0x172 [<ffffffff81013ffe>] > > > xen_do_hypervisor_callback+0x1e/0x30 to a > SOFTIRQ-irq-unsafe > > lock: > > > (purge_lock){+.+...} ... which became SOFTIRQ-irq-unsafe > at: ... > > > [<ffffffff8108eadc>] __lock_acquire+0x341/0xc07 > > [<ffffffff8108f46f>] > > > lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] > > _spin_lock+0x36/0x6b > > > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a > > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > > [<ffffffff8100e58c>] > > > xen_alloc_ptpage+0x51/0x82 [<ffffffff8100e5d0>] > > > xen_alloc_pud+0x13/0x15 [<ffffffff810fe3cf>] > > __pud_alloc+0x79/0xb3 > > > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 > > > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 > > [<ffffffff8110c197>] > > > map_vm_area+0x34/0x47 [<ffffffff8110c2cf>] > > > __vmalloc_area_node+0x125/0x14d [<ffffffff8110c379>] > > > __vmalloc_node+0x82/0x91 [<ffffffff8110c4e9>] > > __vmalloc+0x20/0x22 > > > [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe > > > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d > > [<ffffffff819c1d99>] > > > start_kernel+0x3de/0x426 [<ffffffff819c12c3>] > > > x86_64_start_reservations+0xae/0xb2 [<ffffffff819c4d5d>] > > > xen_start_kernel+0x4b9/0x4c0 other info that might help > us debug > > this: > > > 2 locks held by khubd/100: #0: > (usb_address0_mutex){+.+...}, > > at: > > > [<ffffffff81354f5f>] hub_port_init+0x81/0x7e4 #1: > > > (&uhci->lock){..-...}, at: [<ffffffff8137aedd>] > > > uhci_urb_enqueue+0x46/0x7e3 the dependencies between > > SOFTIRQ-irq-safe > > > lock and the holding lock: -> (&uhci->lock){..-...} ops: 0 > { > > > IN-SOFTIRQ-W at: > [<ffffffff8108ea6d>] > > > __lock_acquire+0x2d2/0xc07 > > [<ffffffff8108f46f>] > > > lock_acquire+0xcd/0xf2 > > [<ffffffff81485526>] > > > _spin_lock_irqsave+0x4f/0x86 > > > [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c > > > [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a > > > [<ffffffff8135a479>] rh_timer_func+0xe/0x10 > > > [<ffffffff810693bd>] run_timer_softirq+0x1a6/0x257 > > > [<ffffffff810627e4>] __do_softirq+0xe6/0x1bc > > > [<ffffffff81013fac>] call_softirq+0x1c/0x30 > > > [<ffffffff81015794>] do_softirq+0x4b/0xa7 > > > [<ffffffff81062229>] irq_exit+0x4a/0x89 > > > [<ffffffff812bf9d9>] xen_evtchn_do_upcall+0x156/0x172 > > > [<ffffffff81013ffe>] > xen_do_hypervisor_callback+0x1e/0x30 > > > INITIAL USE at: > [<ffffffff8108eb29>] > > > __lock_acquire+0x38e/0xc07 > > [<ffffffff8108f46f>] > > > lock_acquire+0xcd/0xf2 > > [<ffffffff81485526>] > > > _spin_lock_irqsave+0x4f/0x86 > > [<ffffffff8137c3d7>] > > > uhci_hub_control+0x74/0x401 > > [<ffffffff8135bdac>] > > > usb_hcd_submit_urb+0x7a6/0xa1e > > > [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1 > > > [<ffffffff8135d51f>] usb_start_wait_urb+0x54/0x1b1 > > > [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113 > > > [<ffffffff81358922>] hub_probe+0x37c/0xfaa > > > [<ffffffff81360a35>] usb_probe_interface+0x15a/0x1f7 > > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > > [<ffffffff813077fa>] __device_attach+0x28/0x31 > > > [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 > > > [<ffffffff81307891>] device_attach+0x65/0x7c > > > [<ffffffff8130667e>] bus_probe_device+0x27/0x3e > > > [<ffffffff813045b3>] device_add+0x3ab/0x57d > > > [<ffffffff8135e3ca>] usb_set_configuration+0x5b9/0x677 > > > [<ffffffff81367b85>] generic_probe+0x67/0xae > > > [<ffffffff813607b1>] usb_probe_device+0x7f/0x87 > > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > > [<ffffffff813077fa>] __device_attach+0x28/0x31 > > > [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 > > > [<ffffffff81307891>] device_attach+0x65/0x7c > > > [<ffffffff8130667e>] bus_probe_device+0x27/0x3e > > > [<ffffffff813045b3>] device_add+0x3ab/0x57d > > > [<ffffffff8135616e>] usb_new_device+0x154/0x201 > > > [<ffffffff8135b42e>] usb_add_hcd+0x4c5/0x69d > > > [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 > > > [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b > > > [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 > > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > > [<ffffffff813077ae>] __driver_attach+0x59/0x7d > > > [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 > > > [<ffffffff813073fd>] driver_attach+0x21/0x23 > > > [<ffffffff81306487>] bus_add_driver+0xe1/0x26b > > > [<ffffffff81307ad5>] driver_register+0xa3/0x11a > > > [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 > > > [<ffffffff819f403b>] uhci_hcd_init+0x88/0xc1 > > > [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > > [<ffffffff819c1961>] kernel_init+0x172/0x1cc > > > [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key > at: > > > [<ffffffff8268de38>] __key.33456+0x0/0x8 ... acquired at: > > > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 > > [<ffffffff8108f128>] > > > __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>] > > > lock_acquire+0xcd/0xf2 [<ffffffff81485526>] > > > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] > > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>] > > > uhci_alloc_qh+0x33/0x146 [<ffffffff8137af66>] > > > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>] > > > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>] > > > usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] > > > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] > > > usb_control_msg+0xee/0x113 [<ffffffff813551fb>] > > > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] > > > hub_events+0x91e/0x11a2 [<ffffffff81358432>] > > hub_thread+0x25/0x199 > > > [<ffffffff8107b8fd>] kthread+0x6e/0x76 > [<ffffffff81013eaa>] > > > child_rip+0xa/0x20 the dependencies between the lock to > be > > acquired > > > and SOFTIRQ-irq-unsafe lock: -> (purge_lock){+.+...} ops: > 0 { > > > HARDIRQ-ON-W at: > [<ffffffff8108eaba>] > > > __lock_acquire+0x31f/0xc07 > > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > > > [<ffffffff814853bc>] _spin_lock+0x36/0x6b > > > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a > > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > > > [<ffffffff8100e58c>] > xen_alloc_ptpage+0x51/0x82 > > > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 > > > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > > > [<ffffffff8110bf76>] > vmap_page_range_noflush+0x9a/0x264 > > > [<ffffffff8110c161>] > vmap_page_range+0xe/0x10 > > > [<ffffffff8110c197>] > map_vm_area+0x34/0x47 > > > [<ffffffff8110c2cf>] > > __vmalloc_area_node+0x125/0x14d > > > [<ffffffff8110c379>] > __vmalloc_node+0x82/0x91 > > > [<ffffffff8110c4e9>] > __vmalloc+0x20/0x22 > > > [<ffffffff819dfef1>] > > alloc_large_system_hash+0x150/0x1fe > > > [<ffffffff819e28c5>] > > vfs_caches_init+0xa9/0x11d > > > [<ffffffff819c1d99>] > > start_kernel+0x3de/0x426 > > > [<ffffffff819c12c3>] > > > x86_64_start_reservations+0xae/0xb2 > > > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 > > SOFTIRQ-ON-W at: > > > [<ffffffff8108eadc>] > > __lock_acquire+0x341/0xc07 > > > [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 > > > [<ffffffff814853bc>] > _spin_lock+0x36/0x6b > > > [<ffffffff8110aa20>] > > > __purge_vmap_area_lazy+0x54/0x18a > > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > > > [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 > > > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 > > > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > > > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 > > > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 > > > [<ffffffff8110c197>] map_vm_area+0x34/0x47 > > > [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d > > > [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 > > > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 > > > [<ffffffff819dfef1>] > alloc_large_system_hash+0x150/0x1fe > > > [<ffffffff819e28c5>] > vfs_caches_init+0xa9/0x11d > > > [<ffffffff819c1d99>] > start_kernel+0x3de/0x426 > > > [<ffffffff819c12c3>] > > > x86_64_start_reservations+0xae/0xb2 > > > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 > INITIAL USE > > at: > > > [<ffffffff8108eb29>] > > __lock_acquire+0x38e/0xc07 > > > [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 > > > [<ffffffff814853bc>] > _spin_lock+0x36/0x6b > > > [<ffffffff8110aa20>] > > __purge_vmap_area_lazy+0x54/0x18a > > > [<ffffffff8110c82f>] > > vm_unmap_aliases+0x167/0x176 > > > [<ffffffff8100e58c>] > > xen_alloc_ptpage+0x51/0x82 > > > [<ffffffff8100e5d0>] > > xen_alloc_pud+0x13/0x15 > > > [<ffffffff810fe3cf>] > __pud_alloc+0x79/0xb3 > > > [<ffffffff8110bf76>] > > vmap_page_range_noflush+0x9a/0x264 > > > [<ffffffff8110c161>] > > vmap_page_range+0xe/0x10 > > > [<ffffffff8110c197>] > map_vm_area+0x34/0x47 > > > [<ffffffff8110c2cf>] > > __vmalloc_area_node+0x125/0x14d > > > [<ffffffff8110c379>] > > __vmalloc_node+0x82/0x91 > > > [<ffffffff8110c4e9>] > __vmalloc+0x20/0x22 > > > [<ffffffff819dfef1>] > > > alloc_large_system_hash+0x150/0x1fe > > > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d > > > [<ffffffff819c1d99>] start_kernel+0x3de/0x426 > > > [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2 > > > [<ffffffff819c4d5d>] > xen_start_kernel+0x4b9/0x4c0 } > > ... > > > key at: [<ffffffff81741ef8>] > purge_lock.27226+0x18/0x40 > > ... > > > acquired at: [<ffffffff8108f20c>] > __lock_acquire+0xa71/0xc07 > > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > > [<ffffffff814853bc>] > > > _spin_lock+0x36/0x6b [<ffffffff8110aa20>] > > > __purge_vmap_area_lazy+0x54/0x18a [<ffffffff8110c82f>] > > > vm_unmap_aliases+0x167/0x176 [<ffffffff8100d7ca>] > > > xen_create_contiguous_region+0x51/0x106 > [<ffffffff81250d84>] > > > xen_swiotlb_alloc_coherent+0x62/0xa6 > [<ffffffff8111188c>] > > > dma_pool_alloc+0x136/0x2a8 [<ffffffff81370efe>] > > > ehci_qh_alloc+0x44/0x107 [<ffffffff81373f5d>] > > > ehci_pci_setup+0x22a/0x9c1 [<ffffffff8135b18e>] > > > usb_add_hcd+0x225/0x69d [<ffffffff8136907b>] > > > usb_hcd_pci_probe+0x270/0x3b1 [<ffffffff8125a8ad>] > > > local_pci_probe+0x17/0x1b [<ffffffff8125b4c4>] > > > pci_device_probe+0xcb/0xf7 [<ffffffff81307635>] > > > driver_probe_device+0xf8/0x218 [<ffffffff813077ae>] > > > __driver_attach+0x59/0x7d [<ffffffff813069e1>] > > > bus_for_each_dev+0x54/0x83 [<ffffffff813073fd>] > > > driver_attach+0x21/0x23 [<ffffffff81306487>] > > > bus_add_driver+0xe1/0x26b [<ffffffff81307ad5>] > > > driver_register+0xa3/0x11a [<ffffffff8125b71b>] > > > __pci_register_driver+0x65/0xc2 [<ffffffff819f3ee0>] > > > ehci_hcd_init+0x7f/0xc0 [<ffffffff8100a07e>] > > > do_one_initcall+0x73/0x18b [<ffffffff819c1961>] > > > kernel_init+0x172/0x1cc [<ffffffff81013eaa>] > > child_rip+0xa/0x20 -> > > > (&retval->lock){......} ops: 0 { INITIAL USE at: > > > [<ffffffff8108eb29>] __lock_acquire+0x38e/0xc07 > > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > > > [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 > > > [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 > > > [<ffffffff81370efe>] ehci_qh_alloc+0x44/0x107 > > > [<ffffffff81373f5d>] ehci_pci_setup+0x22a/0x9c1 > > > [<ffffffff8135b18e>] usb_add_hcd+0x225/0x69d > > > [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 > > > [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b > > > [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 > > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > > [<ffffffff813077ae>] __driver_attach+0x59/0x7d > > > [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 > > > [<ffffffff813073fd>] driver_attach+0x21/0x23 > > > [<ffffffff81306487>] bus_add_driver+0xe1/0x26b > > > [<ffffffff81307ad5>] driver_register+0xa3/0x11a > > > [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 > > > [<ffffffff819f3ee0>] ehci_hcd_init+0x7f/0xc0 > > > [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > > [<ffffffff819c1961>] kernel_init+0x172/0x1cc > > > [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key > at: > > > [<ffffffff824dc3c4>] __key.24188+0x0/0x1c ... acquired > at: > > > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 > > [<ffffffff8108f128>] > > > __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>] > > > lock_acquire+0xcd/0xf2 [<ffffffff81485526>] > > > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] > > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>] > > > uhci_alloc_qh+0x33/0x146 [<ffffffff8137af66>] > > > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>] > > > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>] > > > usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] > > > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] > > > usb_control_msg+0xee/0x113 [<ffffffff813551fb>] > > > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] > > > hub_events+0x91e/0x11a2 [<ffffffff81358432>] > > hub_thread+0x25/0x199 > > > [<ffffffff8107b8fd>] kthread+0x6e/0x76 > [<ffffffff81013eaa>] > > > child_rip+0xa/0x20 stack backtrace: Pid: 100, comm: > khubd Not > > tainted > > > 2.6.32.9 #1 Call Trace: [<ffffffff8108cd50>] > > check_usage+0x331/0x345 > > > [<ffffffff81032d79>] ? pvclock_clocksource_read+0x47/0x80 > > > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 > > [<ffffffff8108f128>] > > > __lock_acquire+0x98d/0xc07 [<ffffffff8111008c>] ? > > > sys_swapoff+0x870/0x9d0 [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 > > > [<ffffffff8111178c>] ? dma_pool_alloc+0x36/0x2a8 > > [<ffffffff81485526>] > > > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] ? > > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8111178c>] > > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8111a986>] ? > > init_object+0x73/0x7b > > > [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf > > > [<ffffffff8100f452>] ? check_events+0x12/0x20 > > [<ffffffff8137aa7b>] > > > uhci_alloc_qh+0x33/0x146 [<ffffffff8111dda9>] ? > > > kmem_cache_alloc+0xd9/0x150 [<ffffffff8137af66>] > > > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135a29c>] ? > > > dma_map_single_attrs+0xb4/0xc6 [<ffffffff8135be92>] > > > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8100ed81>] ? > > > xen_force_evtchn_callback+0xd/0xf [<ffffffff8100ed81>] ? > > > xen_force_evtchn_callback+0xd/0xf [<ffffffff8100f452>] ? > > > check_events+0x12/0x20 [<ffffffff8108b9ea>] ? > > > lockdep_init_map+0x9f/0x115 [<ffffffff8135c6b2>] > > > usb_submit_urb+0x297/0x2f1 [<ffffffff8107beb6>] ? > > > __init_waitqueue_head+0x3a/0x4c [<ffffffff8135d51f>] > > > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8100f452>] ? > > > check_events+0x12/0x20 [<ffffffff8135c939>] ? > > usb_alloc_urb+0x21/0x4b > > > [<ffffffff8135c907>] ? usb_init_urb+0x2a/0x3b > > [<ffffffff8135d8a1>] > > > usb_control_msg+0xee/0x113 [<ffffffff8111c5ef>] ? > > > kmem_cache_alloc_notrace+0xe8/0x111 [<ffffffff8135517a>] > ? > > > hub_port_init+0x29c/0x7e4 [<ffffffff813551fb>] > > > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] > > hub_events+0x91e/0x11a2 > > > [<ffffffff8135840d>] ? hub_thread+0x0/0x199 > > [<ffffffff81358432>] > > > hub_thread+0x25/0x199 [<ffffffff8107bb4f>] ? > > > autoremove_wake_function+0x0/0x3d [<ffffffff8107b8fd>] > > > kthread+0x6e/0x76 [<ffffffff81013eaa>] child_rip+0xa/0x20 > > > [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > > > [<ffffffff81013810>] ? restore_args+0x0/0x30 > > [<ffffffff8107b9f2>] ? > > > kthreadd+0xed/0x10f [<ffffffff81013ea0>] ? > child_rip+0x0/0x20 > > ata1: > > > SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: > ATA-8: > > Hitachi > > > HDT721025SLA380, STBOA3AA, max UDMA/133 ata1.00: 488397168 > > sectors, > > > multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured > for > > UDMA/133 > > > scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 > STBO > > PQ: 0 > > > ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte logical > blocks: (250 > > GB/232 > > > GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd > 0:0:0:0: > > [sda] > > > Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a > 00 00 sd > > > 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't > > > support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] > Attached > > SCSI disk > > > Freeing unused kernel memory: 3396k freed Write protecting > the > > kernel > > > read-only data: 6988k Red Hat nash version 5.1.19.6 > starting > > Mounting > > > proc filesystem Mounting sysfs filesystem Creating /dev > Creating > > initial > > > device nodes Setting up hotplug. usb 7-1: New USB device > found, > > > idVendor=0458, idProduct=0007 usb 7-1: New USB device > strings: > > Mfr=2, > > > Product=1, SerialNumber=0 usb 7-1: Product: Optical Mouse > usb > > 7-1: > > > Manufacturer: KYE usb 7-1: configuration #1 chosen from 1 > choice > > input: > > > KYE Optical Mouse as > > > > /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input3 > > > generic-usb 0003:0458:0007.0001: input,hidraw0: USB HID > v1.10 > > Mouse [KYE > > > Optical Mouse] on usb-0000:00:1d.1-1/input0 Creating block > device > > nodes. > > > Loading aacraid.ko module Adaptec aacraid driver > 1.1-5[2461]-ms > > Scanning > > > and configuring dmraid supported devices Scanning logical > volumes > > > Reading all physical volumes. This may take a while... > > Activating > > > logical volumes Volume group "VolGroup01" not found > Trying to > > resume > > > from /dev/VolGroup01/LogVol01 Unable to access resume > device > > > (/dev/VolGroup01/LogVol01) Creating root device. Mounting > root > > > filesystem. mount: could not find filesystem '/dev/root' > Setting > > up > > > other filesystems. Setting up new root fs setuproot: > moving /dev > > failed: > > > No such file or directory no fstab.sys, mounting internal > > defaults > > > setuproot: error mounting /proc: No such file or directory > > setuproot: > > > error mounting /sys: No such file or directory Switching > to new > > root and > > > running init. unmounting old /dev unmounting old /proc > unmounting > > old > > > /sys switchroot: mount failed: No such file or directory > init > > used > > > greatest stack depth: 4088 bytes left Kernel panic - not > syncing: > > > Attempted to kill init! Pid: 1, comm: init Not tainted > 2.6.32.9 > > #1 Call > > > Trace: [<ffffffff8105b73f>] panic+0xa5/0x167 > > [<ffffffff8100ed81>] ? > > > xen_force_evtchn_callback+0xd/0xf [<ffffffff8105f2ab>] ? > > > do_exit+0x38a/0x701 [<ffffffff8100f43f>] ? > > > xen_restore_fl_direct_end+0x0/0x1 [<ffffffff8108f81b>] ? > > > lock_release+0x179/0x184 [<ffffffff8108ca1d>] ? > > > trace_hardirqs_on+0xd/0xf [<ffffffff81484fcf>] ? > > > _write_unlock_irq+0x37/0x3c [<ffffffff8105ef9f>] > > do_exit+0x7e/0x701 > > > [<ffffffff8105f6be>] sys_exit_group+0x0/0x1b > > [<ffffffff8105f6d5>] > > > sys_exit_group+0x17/0x1b [<ffffffff81012d72>] > > > system_call_fastpath+0x16/0x1b > > > > > > References > > > > > > Visible links > > > 1. mailto:[18][19]pasik@iki.fi > > > 2. mailto:[19][20]pasik@iki.fi > > > 3. > > > [20][21]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 4. > > > [21][22]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 5. mailto:[22][23]pasik@iki.fi > > > 6. > > > [23][24]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 7. > > > [24][25]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 8. mailto:[25][26]pasik@iki.fi > > > 9. mailto:[26][27]pasik@iki.fi > > > 10. > > > [27][28]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 11. > > > [28][29]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 12. mailto:[29][30]pasik@iki.fi > > > 13. > > > [30][31]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 14. > > > [31][32]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 15. mailto:[32][33]pasik@iki.fi > > > 16. mailto:[33][34]dm-devel@redhat.com > > > > References > > > > Visible links > > 1. mailto:[35]pasik@iki.fi > > 2. mailto:[36]pasik@iki.fi > > 3. mailto:[37]pasik@iki.fi > > 4. > [38]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 5. > [39]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 6. mailto:[40]pasik@iki.fi > > 7. > [41]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 8. > [42]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 9. mailto:[43]pasik@iki.fi > > 10. mailto:[44]pasik@iki.fi > > 11. > [45]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 12. > [46]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 13. mailto:[47]pasik@iki.fi > > 14. > [48]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 15. > [49]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 16. mailto:[50]pasik@iki.fi > > 17. mailto:[51]dm-devel@redhat.com > > 18. mailto:[52]pasik@iki.fi > > 19. mailto:[53]pasik@iki.fi > > 20. > [54]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 21. > [55]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 22. mailto:[56]pasik@iki.fi > > 23. > [57]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 24. > [58]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 25. mailto:[59]pasik@iki.fi > > 26. mailto:[60]pasik@iki.fi > > 27. > [61]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 28. > [62]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 29. mailto:[63]pasik@iki.fi > > 30. > [64]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 31. > [65]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 32. mailto:[66]pasik@iki.fi > > 33. mailto:[67]dm-devel@redhat.com > > References > > Visible links > 1. mailto:pasik@iki.fi > 2. mailto:pasik@iki.fi > 3. mailto:pasik@iki.fi > 4. mailto:pasik@iki.fi > 5. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 6. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 7. mailto:pasik@iki.fi > 8. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 9. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 10. mailto:pasik@iki.fi > 11. mailto:pasik@iki.fi > 12. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 13. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 14. mailto:pasik@iki.fi > 15. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 16. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 17. mailto:pasik@iki.fi > 18. mailto:dm-devel@redhat.com > 19. mailto:pasik@iki.fi > 20. mailto:pasik@iki.fi > 21. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 22. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 23. mailto:pasik@iki.fi > 24. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 25. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 26. mailto:pasik@iki.fi > 27. mailto:pasik@iki.fi > 28. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 29. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 30. mailto:pasik@iki.fi > 31. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 32. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 33. mailto:pasik@iki.fi > 34. mailto:dm-devel@redhat.com > 35. mailto:pasik@iki.fi > 36. mailto:pasik@iki.fi > 37. mailto:pasik@iki.fi > 38. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 39. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 40. mailto:pasik@iki.fi > 41. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 42. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 43. mailto:pasik@iki.fi > 44. mailto:pasik@iki.fi > 45. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 46. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 47. mailto:pasik@iki.fi > 48. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 49. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 50. mailto:pasik@iki.fi > 51. mailto:dm-devel@redhat.com > 52. mailto:pasik@iki.fi > 53. mailto:pasik@iki.fi > 54. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 55. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 56. mailto:pasik@iki.fi > 57. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 58. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 59. mailto:pasik@iki.fi > 60. mailto:pasik@iki.fi > 61. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 62. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 63. mailto:pasik@iki.fi > 64. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 65. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 66. mailto:pasik@iki.fi > 67. mailto:dm-devel@redhat.com ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-18 16:15 ` Pasi Kärkkäinen @ 2010-03-18 18:16 ` kishore kumar 2010-03-18 19:31 ` Pasi Kärkkäinen 0 siblings, 1 reply; 32+ messages in thread From: kishore kumar @ 2010-03-18 18:16 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users [-- Attachment #1.1: Type: text/plain, Size: 77540 bytes --] I did the below steps for pvops dom 0 kernel. make menuconfig make bzImage make modules make modules_install cp -a .config /boot/config-2.6.32.10 cp -a System.map /boot/System.map-2.6.32.10 cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10 /sbin/mkinitrd -f --builtin=ahci /boot/initrd-2.6.32.10.img 2.6.32.10 I tried root=/dev/VolGroup01/LogVol00 . On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen <pasik@iki.fi> wrote: > On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore kumar wrote: > > Here is the output of df -h and cat /etc/fstab of my machine. > > > > Did you try both root=/dev/mapper/VolGroup01-LogVol00 and > root=/dev/VolGroup01/LogVol00 arguments for the dom0 kernel? > > How did you generate the initrd image for the dom0 kernel? > > Anyway this sounds like a grub.conf or initrd problem, not Xen or pvops > dom0 kernel kernel problem. > > -- Pasi > > > Please let me know your thoughts. > > > > [root@localhost kishore]# df -h > > > > Filesystem Size Used Avail Use% Mounted on > > > > /dev/mapper/VolGroup01-LogVol00 > > > > 223G 29G 182G 14% / > > > > /dev/sda1 99M 81M 13M 87% /boot > > > > tmpfs 757M 0 757M 0% /dev/shm > > > > [root@localhost kishore]# cat /etc/fstab > > > > /dev/VolGroup01/LogVol00 / ext3 defaults 1 1 > > > > LABEL=/boot /boot ext3 defaults 1 2 > > > > tmpfs /dev/shm tmpfs defaults 0 0 > > > > devpts /dev/pts devpts gid=5,mode=620 0 0 > > > > sysfs /sys sysfs defaults 0 0 > > > > proc /proc proc defaults 0 0 > > > > /dev/VolGroup01/LogVol01 swap swap defaults 0 0 > > > > [root@localhost kishore]# > > > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen <[1]pasik@iki.fi> > wrote: > > > > On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore kumar wrote: > > > I am not sure. Can you please let me know how to check this? > any > > command > > > ?? > > > > well simple "df -h" will show it. and also "cat /etc/fstab". > > You can also check it from your grub configuration.. from the > working > > baremetal (non-Xen) entry. > > > > -- Pasi > > > > > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi Kärkkäinen > > <[1][2]pasik@iki.fi> wrote: > > > > > > On Tue, Mar 16, 2010 at 03:22:50PM -0700, kishore kumar > wrote: > > > > attached is the log captured in with the word document > . > > > > > > > > > > Scanning logical volumes > > > Reading all physical volumes. This may take a while... > > > Activating logical volumes > > > Volume group "VolGroup01" not found > > > Trying to resume from /dev/VolGroup01/LogVol01 > > > Unable to access resume device (/dev/VolGroup01/LogVol01) > > > Creating root device. > > > Mounting root filesystem. > > > mount: could not find filesystem '/dev/root' > > > Setting up other filesystems. > > > Setting up new root fs > > > setuproot: moving /dev failed: No such file or directory > > > no fstab.sys, mounting internal defaults > > > setuproot: error mounting /proc: No such file or directory > > > setuproot: error mounting /sys: No such file or directory > > > Switching to new root and running init. > > > unmounting old /dev > > > unmounting old /proc > > > unmounting old /sys > > > switchroot: mount failed: No such file or directory > > > init used greatest stack depth: 4088 bytes left > > > Kernel panic - not syncing: Attempted to kill init! > > > > > > So it seems it gets all the way to executing the initrd > image, > > > which then fails to mount the root fs. > > > > > > Earlier in the log: > > > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > > > ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA, max > UDMA/133 > > > ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), > AA > > > ata1.00: configured for UDMA/133 > > > scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 > STBO > > PQ: 0 > > > ANSI: 5 > > > sd 0:0:0:0: Attached scsi generic sg0 type 0 > > > sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 > GB/232 > > GiB) > > > sd 0:0:0:0: [sda] Write Protect is off > > > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, > > doesn't > > > support DPO or FUA > > > sda: sda1 sda2 > > > sd 0:0:0:0: [sda] Attached SCSI disk > > > > > > so /dev/sda was detected. Is your root lvm volume on /dev/sda > ? > > > Is /dev/VolGroup01/LogVol01 really your root fs? > > > > > > -- Pasi > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi Kärkkäinen > > > <[1][2][3]pasik@iki.fi> wrote: > > > > > > > > On Tue, Mar 16, 2010 at 02:56:06PM -0700, kishore > kumar > > wrote: > > > > > Please find the attached log file after fixing > the > > dom 0 > > > kernel cmd > > > > line > > > > > as below > > > > > > > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 > > > earlyprintk=xen > > > > nomodeset > > > > > > > > > > > > > There's something wrong with the log, the dom0 kernel > > parts are > > > all on > > > > one line.. > > > > It's really difficult to read it. > > > > > > > > -- Pasi > > > > > > > > > Thanks > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 2:29 PM, Pasi Kärkkäinen > > > > <[1][2][3][4]pasik@iki.fi> wrote: > > > > > > > > > > On Tue, Mar 16, 2010 at 02:16:22PM -0700, > kishore > > kumar > > > wrote: > > > > > > I did below steps. > > > > > > > > > > > > > > > > > > I pulled DOM 0 kernel from > > > > > > git clone > > > > > > > > > > > > > > git://[1][2][3][4][5] > git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > linux-2.6-xen > > > > > > > > > > > > cd linux-2.6-xen > > > > > > > > > > > > make clean > > > > > > > > > > > > cp -a .config .config-old > > > > > > > > > > > > wget -O .config > > > > > > > > > > > > > > > > > > > > [2][3][4][5][6] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > > > > > make oldconfig > > > > > > > > > > > > make bzImage > > > > > > > > > > > > make modules > > > > > > > > > > > > make modules_install > > > > > > > > > > > > cp -a .config /boot/config-2.6.32.9 > > > > > > > > > > > > cp -a System.map /boot/System.map-2.6.32.9 > > > > > > > > > > > > cp -a arch/x86/boot/bzImage > > /boot/vmlinuz-2.6.32.9 > > > > > > > > > > > > and modified the grub.conf as below > > > > > > > > > > > > > > > > > > Root(hd0,0) > > > > > > > > > > > > kernel /xen.gz console=vga,com1 > > com1=115200,8n1 > > > msi=1 > > > > iommu=1 > > > > > > > > > > > > module /vmlinuz-2.6.32.9 ro > > > root=/dev/VolGroup01/LogVo100 > > > > rhgb > > > > > quiet > > > > > > > > > > > > module /initrd-2.6.32.9.img > > > > > > > > > > > > > > > > > > and rebooted the machine. Then It booted > with > > some > > > xen > > > > messages > > > > > and > > > > > > stopped. Those were the messages captured > > from > > > serial > > > > console. > > > > > > > > > > > > Please let me know if I did something > wrong > > here. > > > > > > > > > > > > > > > > Please fix the kernel cmdline based on my > earlier > > email, > > > and > > > > capture and > > > > > post the > > > > > serial console log again! > > > > > > > > > > -- Pasi > > > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 1:20 PM, Pasi > > Kärkkäinen > > > > > <[3][4][5][6][7]pasik@iki.fi> wrote: > > > > > > > > > > > > On Tue, Mar 16, 2010 at 01:16:28PM > -0700, > > Jeremy > > > > Fitzhardinge > > > > > wrote: > > > > > > > On 03/16/2010 12:48 PM, Pasi > Kärkkäinen > > wrote: > > > > > > >> On Tue, Mar 16, 2010 at 09:43:44PM > +0200, > > Pasi > > > > Kärkkäinen > > > > > wrote: > > > > > > >> > > > > > > >>> On Tue, Mar 16, 2010 at 10:32:17AM > > -0700, > > > kishore > > > > kumar > > > > > wrote: > > > > > > >>> > > > > > > >>>> Attached is the output captured > > from > > > serial > > > > console. > > > > > > >>>> > > > > > > >>>> Machine does not boot after > > compiling xen > > > 3.4.3 > > > > with > > > > > pv_ops dom > > > > > > 0 kernel. > > > > > > >>>> > > > > > > >>>> Please let me know what is > going > > wrong > > > here. > > > > > > >>>> > > > > > > >>>> > > > > > > >>> Ok this looks like a bug that is > already > > being > > > sorted > > > > out on > > > > > > xen-devel mailinglist. > > > > > > >>> I added CC to xen-devel. > > > > > > >>> > > > > > > >>> > > > > > > >> > > > > > > > > > > > > > > Those messages are not a problem in > > themselves, > > > but the > > > > related > > > > > > problem > > > > > > > is believed to be fixed in current > > > xen/stable-2.6.32.x. > > > > It > > > > > looks like > > > > > > > the output stops there because the Xen > > console > > > isn't set > > > > up > > > > > properly > > > > > > for > > > > > > > some reason. > > > > > > > > > > > > > > > > > > > Yeah, remove "rhgb quiet" from the > options.. > > the > > > dom0 > > > > kernel > > > > > cmdline > > > > > > should be like this: > > > > > > ro root=/dev/VolGroup01/LogVol00 > > console=hvc0 > > > > earlyprintk=xen > > > > > nomodeset > > > > > > -- Pasi > > > > > > > > > > > > References > > > > > > > > > > > > Visible links > > > > > > 1. > > > > > > > > > [5][6][7][8] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > 2. > > > > > > > > > > > > > > [6][7][8][9] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > 3. mailto:[7][8][9][10]pasik@iki.fi > > > > > > > > > > References > > > > > > > > > > Visible links > > > > > 1. mailto:[9][10][11]pasik@iki.fi > > > > > 2. > > > > > > > > > [10][11][12] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > 3. > > > > > > > > > [11][12][13] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > 4. mailto:[12][13][14]pasik@iki.fi > > > > > 5. > > > > > > > > > [13][14][15] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > 6. > > > > > > > > > [14][15][16] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > 7. mailto:[15][16][17]pasik@iki.fi > > > > > Asserting Post complete GPIO!!! > > > > > Transfer control to CSM 16-bit binary for legacy > boot > > > > > __ __ _____ _ _ _____ _ > _ > > > > > \ \/ /___ _ __ |___ /| || | |___ / _ __ ___| > || | > > _ > > > __ _ > > > > __ ___ > > > > > \ // _ \ '_ \ |_ \| || |_ |_ \ __| '__/ __| > || > > |_ __| > > > '_ \| > > > > '__/ _ \ > > > > > / \ __/ | | | ___) |__ _| ___) |__| | | > (__|__ > > _|__| > > > |_) | | > > > > | __/ > > > > > /_/\_\___|_| |_| |____(_) |_|(_)____/ |_| \___| > |_| > > | > > > .__/|_| > > > > \___| > > > > > > > |_| > > > > > (XEN) Xen version 3.4.3-rc4-pre (kishore@localdomain > ) > > (gcc > > > version > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar 15 13:44:31 > PDT > > 2010 > > > > > (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 2010 > +0000 > > > > 19924:6e72f8c3c017 > > > > > (XEN) Command line: console=vga,com1 com1=115200,8n1 > > msi=1 > > > iommu=1 > > > > > (XEN) Video information: > > > > > (XEN) VGA is text mode 80x25, font 8x16 > > > > > (XEN) VBE/DDC methods: none; EDID transfer time: 0 > > seconds > > > > > (XEN) EDID info not retrieved because no DDC > retrieval > > method > > > > detected > > > > > (XEN) Disc information: > > > > > (XEN) Found 1 MBR signatures > > > > > (XEN) Found 1 EDD information structures > > > > > (XEN) Xen-e820 RAM map: > > > > > (XEN) 0000000000000000 - 000000000009d000 (usable) > > > > > (XEN) 000000000009d000 - 00000000000a0000 > (reserved) > > > > > (XEN) 00000000000e0000 - 0000000000100000 > (reserved) > > > > > (XEN) 0000000000100000 - 000000006d597000 (usable) > > > > > (XEN) 000000006d597000 - 000000006d686000 > (reserved) > > > > > (XEN) 000000006d686000 - 000000006f598000 (usable) > > > > > (XEN) 000000006f598000 - 000000006f59a000 > (reserved) > > > > > (XEN) 000000006f59a000 - 000000006f5af000 (ACPI > NVS) > > > > > (XEN) 000000006f5af000 - 000000006f5d9000 > (reserved) > > > > > (XEN) 000000006f5d9000 - 000000006f5f9000 (ACPI > data) > > > > > (XEN) 000000006f5f9000 - 000000006f6df000 (ACPI > NVS) > > > > > (XEN) 000000006f6df000 - 000000006f700000 (ACPI > data) > > > > > (XEN) 000000006f700000 - 0000000080000000 > (reserved) > > > > > (XEN) 00000000a0000000 - 00000000b0000000 > (reserved) > > > > > (XEN) 00000000fc000000 - 00000000fd000000 > (reserved) > > > > > (XEN) 00000000fed1c000 - 00000000fed20000 > (reserved) > > > > > (XEN) 00000000ffc00000 - 0000000100000000 > (reserved) > > > > > (XEN) System RAM: 1780MB (1823000kB) > > > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL ) > > > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL THRLY > > 0 > > > > 1000013) > > > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL THRLY > > 0 > > > MSFT > > > > 100000D) > > > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL THRLY > > 3 > > > MSFT > > > > 100000D) > > > > > (XEN) ACPI: FACS 6F5F9000, 0040 > > > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL THRLY > > 0 > > > MSFT > > > > 100000D) > > > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL THRLY > > 1 > > > MSFT > > > > 100000D) > > > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL THRLY > > 1 > > > MSFT > > > > 100000D) > > > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL THRLY > > 1 > > > MSFT > > > > 100000D) > > > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL THRLY > > 0 > > > MSFT > > > > 100000D) > > > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 INTEL SSDT PM > > 4000 > > > INTL > > > > 20061109) > > > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL THRLY > > 1 > > > MSFT > > > > 100000D) > > > > > (XEN) Domain heap initialised > > > > > (XEN) Processor #0 6:12 APIC version 21 > > > > > (XEN) Processor #2 6:12 APIC version 21 > > > > > (XEN) Processor #4 6:12 APIC version 21 > > > > > (XEN) Processor #16 6:12 APIC version 21 > > > > > (XEN) Processor #18 6:12 APIC version 21 > > > > > (XEN) Processor #20 6:12 APIC version 21 > > > > > (XEN) Processor #1 6:12 APIC version 21 > > > > > (XEN) Processor #3 6:12 APIC version 21 > > > > > (XEN) Processor #5 6:12 APIC version 21 > > > > > (XEN) Processor #17 6:12 APIC version 21 > > > > > (XEN) Processor #19 6:12 APIC version 21 > > > > > (XEN) Processor #21 6:12 APIC version 21 > > > > > (XEN) IOAPIC[0]: apic_id 8, version 32, address > > 0xfec00000, GSI > > > 0-23 > > > > > (XEN) IOAPIC[1]: apic_id 9, version 32, address > > 0xfec90000, GSI > > > 24-47 > > > > > (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs > > > > > (XEN) Intel VT-d DMAR tables have been parsed. > > > > > (XEN) Using scheduler: SMP Credit Scheduler (credit) > > > > > (XEN) Detected 3200.207 MHz processor. > > > > > (XEN) VMX: Supported advanced features: > > > > > (XEN) - APIC MMIO access virtualisation > > > > > (XEN) - APIC TPR shadow > > > > > (XEN) - Extended Page Tables (EPT) > > > > > (XEN) - Virtual-Processor Identifiers (VPID) > > > > > (XEN) - Virtual NMI > > > > > (XEN) - MSR direct-access bitmap > > > > > (XEN) VMX: EPT is available. > > > > > (XEN) VMX: VPID is available. > > > > > (XEN) HVM: VMX enabled > > > > > (XEN) HVM: Hardware Assisted Paging detected. > > > > > (XEN) CPU0: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 1/2 eip 88000 > > > > > (XEN) CPU1: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 2/4 eip 88000 > > > > > (XEN) CPU2: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 3/16 eip 88000 > > > > > (XEN) CPU3: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 4/18 eip 88000 > > > > > (XEN) CPU4: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 5/20 eip 88000 > > > > > (XEN) CPU5: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 6/1 eip 88000 > > > > > (XEN) CPU6: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 7/3 eip 88000 > > > > > (XEN) CPU7: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 8/5 eip 88000 > > > > > (XEN) CPU8: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 9/17 eip 88000 > > > > > (XEN) CPU9: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 10/19 eip 88000 > > > > > (XEN) CPU10: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 11/21 eip 88000 > > > > > (XEN) CPU11: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Total of 12 processors activated. > > > > > (XEN) ENABLING IO-APIC IRQs > > > > > (XEN) -> Using new ACK method > > > > > (XEN) checking TSC synchronization across 12 CPUs: > > passed. > > > > > (XEN) Platform timer is 14.318MHz HPET > > > > > ?(XEN) Brought up 12 CPUs > > > > > (XEN) Intel VT-d Snoop Control supported. > > > > > (XEN) Intel VT-d DMA Passthrough not supported. > > > > > (XEN) Intel VT-d Queued Invalidation supported. > > > > > (XEN) Intel VT-d Interrupt Remapping supported. > > > > > (XEN) I/O virtualisation enabled > > > > > (XEN) I/O virtualisation for PV guests disabled > > > > > (XEN) xenoprof: Initialization failed. Intel > processor > > model 44 > > > for P6 > > > > class family is not supported > > > > > (XEN) *** LOADING DOMAIN 0 *** > > > > > (XEN) Xen kernel: 64-bit, lsb, compat32 > > > > > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr > 0x1000000 -> > > > 0x26bb000 > > > > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > > > > (XEN) Dom0 alloc.: > 0000000064000000->0000000068000000 > > > (404490 pages > > > > to be allocated) > > > > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > > > > (XEN) Loaded kernel: > ffffffff81000000->ffffffff826bb000 > > > > > (XEN) Init. ramdisk: > ffffffff826bb000->ffffffff82d0d800 > > > > > (XEN) Phys-Mach map: > ffffffff82d0e000->ffffffff83044050 > > > > > (XEN) Start info: > ffffffff83045000->ffffffff830454b4 > > > > > (XEN) Page tables: > ffffffff83046000->ffffffff83063000 > > > > > (XEN) Boot stack: > ffffffff83063000->ffffffff83064000 > > > > > (XEN) TOTAL: > ffffffff80000000->ffffffff83400000 > > > > > (XEN) ENTRY ADDRESS: ffffffff819c1200 > > > > > (XEN) Dom0 has maximum 12 VCPUs > > > > > (XEN) Scrubbing Free RAM: .done. > > > > > (XEN) Xen trace buffers: disabled > > > > > (XEN) Std. Loglevel: Errors and warnings > > > > > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors > and > > > warnings) > > > > > (XEN) Xen is relinquishing VGA console. > > > > > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three > > times to > > > switch > > > > input to Xen) > > > > > (XEN) Freed 128kB init memory. > > > > > mapping kernel into physical memory > > > > > Xen: setup ISA identity maps > > > > > about to get started... > > > > > Initializing cgroup subsys cpuset > > > > > Initializing cgroup subsys cpu > > > > > Linux version 2.6.32.9 > (kishore@localhost.localdomain) > > (gcc > > > version > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 15 > > 15:16:28 PDT > > > 2010 > > > > > Command line: ro root=/dev/VolGroup01/LogVol00 > > console=hvc0 > > > > earlyprintk=xen nomodeset > > > > > KERNEL supported cpus: > > > > > Intel GenuineIntel > > > > > AMD AuthenticAMD > > > > > Centaur CentaurHauls > > > > > BIOS-provided physical RAM map: > > > > > Xen: 0000000000000000 - 000000000009d000 (usable) > > > > > Xen: 000000000009d000 - 0000000000100000 (reserved) > > > > > Xen: 0000000000100000 - 0000000066c0a000 (usable) > > > > > Xen: 000000006d597000 - 000000006d686000 (reserved) > > > > > Xen: 000000006f598000 - 000000006f59a000 (reserved) > > > > > Xen: 000000006f59a000 - 000000006f5af000 (ACPI NVS) > > > > > Xen: 000000006f5af000 - 000000006f5d9000 (reserved) > > > > > Xen: 000000006f5d9000 - 000000006f5f9000 (ACPI > data) > > > > > Xen: 000000006f5f9000 - 000000006f6df000 (ACPI NVS) > > > > > Xen: 000000006f6df000 - 000000006f700000 (ACPI > data) > > > > > Xen: 000000006f700000 - 0000000080000000 (reserved) > > > > > Xen: 00000000a0000000 - 00000000b0000000 (reserved) > > > > > Xen: 00000000fc000000 - 00000000fd000000 (reserved) > > > > > Xen: 00000000fed1c000 - 00000000fed20000 (reserved) > > > > > Xen: 00000000ffc00000 - 0000000100000000 (reserved) > > > > > bootconsole [xenboot0] enabled > > > > > DMI 2.4 present. > > > > > last_pfn = 0x66c0a max_arch_pfn = 0x400000000 > > > > > init_memory_mapping: > 0000000000000000-0000000066c0a000 > > > > > RAMDISK: 026bb000 - 02d0d800 > > > > > ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL ) > > > > > ACPI: XSDT 000000006f6fe120 00064 (v01 INTEL THRLY > > 00000000 > > > > 01000013) > > > > > ACPI: FACP 000000006f6fd000 000F4 (v04 INTEL THRLY > > 00000000 > > > MSFT > > > > 0100000D) > > > > > ACPI: DSDT 000000006f6f5000 074F1 (v02 INTEL THRLY > > 00000003 > > > MSFT > > > > 0100000D) > > > > > ACPI: FACS 000000006f5f9000 00040 > > > > > ACPI: APIC 000000006f6f4000 001CC (v02 INTEL THRLY > > 00000000 > > > MSFT > > > > 0100000D) > > > > > ACPI: MCFG 000000006f6f3000 0003C (v01 INTEL THRLY > > 00000001 > > > MSFT > > > > 0100000D) > > > > > ACPI: HPET 000000006f6f2000 00038 (v01 INTEL THRLY > > 00000001 > > > MSFT > > > > 0100000D) > > > > > ACPI: SLIT 000000006f6f1000 00030 (v01 INTEL THRLY > > 00000001 > > > MSFT > > > > 0100000D) > > > > > ACPI: WDDT 000000006f6f0000 00040 (v01 INTEL THRLY > > 00000000 > > > MSFT > > > > 0100000D) > > > > > ACPI: SSDT 000000006f5d9000 1FDDC (v01 INTEL SSDT > PM > > 00004000 > > > INTL > > > > 20061109) > > > > > ACPI: 000000006f6ee000 001D0 (v01 INTEL THRLY > > 00000001 > > > MSFT > > > > 0100000D) > > > > > No NUMA configuration found > > > > > Faking a node at 0000000000000000-0000000066c0a000 > > > > > Bootmem setup node 0 > 0000000000000000-0000000066c0a000 > > > > > NODE_DATA [0000000000008000 - 000000000001ffff] > > > > > bootmap [0000000000020000 - 000000000002cd87] > pages d > > > > > (9 early reservations) ==> bootmem [0000000000 - > > 0066c0a000] > > > > > #0 [0000000000 - 0000001000] BIOS data page ==> > > [0000000000 > > > - > > > > 0000001000] > > > > > #1 [0003046000 - 0003063000] XEN PAGETABLES ==> > > [0003046000 > > > - > > > > 0003063000] > > > > > #2 [0000006000 - 0000008000] TRAMPOLINE ==> > > [0000006000 > > > - > > > > 0000008000] > > > > > #3 [0001000000 - 000269ae98] TEXT DATA BSS ==> > > [0001000000 > > > - > > > > 000269ae98] > > > > > #4 [00026bb000 - 0002d0d800] RAMDISK ==> > > [00026bb000 > > > - > > > > 0002d0d800] > > > > > #5 [0002d0e000 - 0003046000] XEN START INFO ==> > > [0002d0e000 > > > - > > > > 0003046000] > > > > > #6 [000269b000 - 000269b011] BRK ==> > > [000269b000 > > > - > > > > 000269b011] > > > > > #7 [0000100000 - 000041a000] PGTABLE ==> > > [0000100000 > > > - > > > > 000041a000] > > > > > #8 [0000001000 - 0000001030] ACPI SLIT ==> > > [0000001000 > > > - > > > > 0000001030] > > > > > found SMP MP-table at [ffff8800000fd750] fd750 > > > > > Zone PFN ranges: > > > > > DMA 0x00000000 -> 0x00001000 > > > > > DMA32 0x00001000 -> 0x00100000 > > > > > Normal 0x00100000 -> 0x00100000 > > > > > Movable zone start PFN for each node > > > > > early_node_map[2] active PFN ranges > > > > > 0: 0x00000000 -> 0x0000009d > > > > > 0: 0x00000100 -> 0x00066c0a > > > > > ACPI: PM-Timer IO Port: 0x408 > > > > > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > > > > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) > > > > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) > > > > > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled) > > > > > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled) > > > > > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) > > > > > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] enabled) > > > > > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) > > > > > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] enabled) > > > > > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled) > > > > > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled) > > > > > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled) > > > > > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) > > > > > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) > > > > > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) > > > > > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) > > > > > ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) > > > > > ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) > > > > > ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) > > > > > ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) > > > > > ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) > > > > > ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) > > > > > ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) > > > > > ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) > > > > > ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1]) > > > > > ACPI: IOAPIC (id[0x08] address[0xfec00000] > gsi_base[0]) > > > > > IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, > GSI > > 0-0 > > > > > ACPI: IOAPIC (id[0x09] address[0xfec90000] > gsi_base[24]) > > > > > IOAPIC[1]: apic_id 9, version 0, address 0xfec90000, > GSI > > 24-24 > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl > dfl) > > > > > ERROR: Unable to locate IOAPIC for GSI 2 > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high > > level) > > > > > ERROR: Unable to locate IOAPIC for GSI 9 > > > > > Using ACPI (MADT) for SMP configuration information > > > > > ACPI: HPET id: 0x8086a401 base: 0xfed00000 > > > > > SMP: Allowing 12 CPUs, 0 hotplug CPUs > > > > > PM: Registered nosave memory: 000000000009d000 - > > > 0000000000100000 > > > > > Allocating PCI resources starting at b0000000 (gap: > > > b0000000:4c000000) > > > > > Booting paravirtualized kernel on Xen > > > > > Xen version: 3.4.3-rc4-pre (preserve-AD) (dom0) > > > > > NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 > > nr_node_ids:1 > > > > > PERCPU: Embedded 478 pages/cpu @ffff880005ebc000 > > s1928024 r8192 > > > d21672 > > > > u1957888 > > > > > pcpu-alloc: s1928024 r8192 d21672 u1957888 > > alloc=478*4096 > > > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] > 05 > > [0] 06 > > > [0] 07 > > > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 > > > > > Xen: using vcpu_info placement > > > > > Built 1 zonelists in Node order, mobility grouping > on. > > Total > > > pages: > > > > 409291 > > > > > Policy zone: DMA32 > > > > > Kernel command line: ro > root=/dev/VolGroup01/LogVol00 > > > console=hvc0 > > > > earlyprintk=xen nomodeset > > > > > PID hash table entries: 4096 (order: 3, 32768 bytes) > > > > > Initializing CPU#0 > > > > > DMA: Placing 64MB software IO TLB between > > ffff880007525000 - > > > > ffff88000b525000 > > > > > DMA: software IO TLB at phys 0x7525000 - 0xb525000 > > > > > xen_swiotlb_fixup: buf=ffff880007525000 > size=67108864 > > > > > xen_swiotlb_fixup: buf=ffff88000b585000 size=32768 > > > > > Memory: 1514268k/1683496k available (4654k kernel > code, > > 396k > > > absent, > > > > 168832k reserved, 3443k data, 3396k init) > > > > > SLUB: Genslabs=14, HWalign=64, Order=0-3, > MinObjects=0, > > > CPUs=12, > > > > Nodes=1 > > > > > Hierarchical RCU implementation. > > > > > NR_IRQS:4352 nr_irqs:3072 > > > > > Already setup the GSI :0 > > > > > Already setup the GSI :1 > > > > > Already setup the GSI :2 > > > > > Already setup the GSI :3 > > > > > Already setup the GSI :4 > > > > > Already setup the GSI :5 > > > > > Already setup the GSI :6 > > > > > Already setup the GSI :7 > > > > > Already setup the GSI :8 > > > > > Already setup the GSI :9 > > > > > Already setup the GSI :10 > > > > > Already setup the GSI :11 > > > > > Already setup the GSI :12 > > > > > Already setup the GSI :13 > > > > > Already setup the GSI :14 > > > > > Already setup the GSI :15 > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl > dfl) > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high > > level) > > > > > xen: sci override: source_irq=9 global_irq=9 > trigger=c > > > polarity=1 > > > > > xen_allocate_pirq: returning irq 9 for gsi 9 > > > > > Already setup the GSI :9 > > > > > xen: acpi sci 9 > > > > > Console: colour VGA+ 80x25 > > > > > console [hvc0] enabled, bootconsole disabled console > > [hvc0] > > > enabled, > > > > bootconsole disabled > > > > > Lock dependency validator: Copyright (c) 2006 Red > Hat, > > Inc., > > > Ingo > > > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... > MAX_LOCK_DEPTH: > > > 48 > > > > ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: > > > 4096 ... > > > > MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: > > 32768 > > > ... > > > > CHAINHASH_SIZE: 16384 memory used by lock > > dependency > > > info: > > > > 6367 kB per task-struct memory footprint: 2688 bytes > > allocated > > > 17039360 > > > > bytes of page_cgroup please try > 'cgroup_disable=memory' > > option if > > > you > > > > don't want memory cgroups installing Xen timer for CPU > 0 > > Detected > > > > 3200.206 MHz processor. Calibrating delay loop > (skipped), > > value > > > > calculated using timer frequency.. 6400.41 BogoMIPS > > (lpj=3200206) > > > > Security Framework initialized SELinux: Initializing. > > Dentry > > > cache hash > > > > table entries: 262144 (order: 9, 2097152 bytes) > > Inode-cache hash > > > table > > > > entries: 131072 (order: 8, 1048576 bytes) Mount-cache > hash > > table > > > > entries: 256 Initializing cgroup subsys ns > Initializing > > cgroup > > > subsys > > > > cpuacct Initializing cgroup subsys memory Initializing > > cgroup > > > subsys > > > > devices Initializing cgroup subsys freezer > Initializing > > cgroup > > > subsys > > > > net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 > > cache: 256K > > > CPU: > > > > L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU: Unsupported > > number of > > > siblings > > > > 32 Performance Events: unsupported p6 CPU model 44 no > PMU > > driver, > > > > software events only. lockdep: fixing up alternatives. > SMP > > > alternatives: > > > > switching to UP code ACPI: Core revision 20090903 > ftrace: > > > converting > > > > mcount calls to 0f 1f 44 00 00 ftrace: allocating > 27971 > > entries > > > in 110 > > > > pages installing Xen timer for CPU 1 lockdep: fixing > up > > > alternatives. > > > > SMP alternatives: switching to SMP code Initializing > CPU#1 > > CPU: > > > L1 I > > > > cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: > L3 > > cache: > > > 12288K > > > > CPU 1/0x0 -> Node 0 CPU: Unsupported number of > siblings 32 > > > installing > > > > Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I > cache: > > 32K, L1 D > > > cache: > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU > 2/0x0 -> > > Node 0 > > > CPU: > > > > Unsupported number of siblings 32 installing Xen timer > for > > CPU 3 > > > > Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: > 32K > > CPU: L2 > > > cache: > > > > 256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node 0 CPU: > > Unsupported > > > number > > > > of siblings 32 installing Xen timer for CPU 4 > Initializing > > CPU#4 > > > CPU: L1 > > > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: > L3 > > cache: > > > 12288K > > > > CPU 4/0x0 -> Node 0 CPU: Unsupported number of > siblings 32 > > > installing > > > > Xen timer for CPU 5 Initializing CPU#5 CPU: L1 I > cache: > > 32K, L1 D > > > cache: > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU > 5/0x0 -> > > Node 0 > > > CPU: > > > > Unsupported number of siblings 32 installing Xen timer > for > > CPU 6 > > > > Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: > 32K > > CPU: L2 > > > cache: > > > > 256K CPU: L3 cache: 12288K CPU 6/0x0 -> Node 0 CPU: > > Unsupported > > > number > > > > of siblings 32 installing Xen timer for CPU 7 > Initializing > > CPU#7 > > > CPU: L1 > > > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: > L3 > > cache: > > > 12288K > > > > CPU 7/0x0 -> Node 0 CPU: Unsupported number of > siblings 32 > > > installing > > > > Xen timer for CPU 8 Initializing CPU#8 CPU: L1 I > cache: > > 32K, L1 D > > > cache: > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU > 8/0x0 -> > > Node 0 > > > CPU: > > > > Unsupported number of siblings 32 installing Xen timer > for > > CPU 9 > > > > Initializing CPU#9 CPU: L1 I cache: 32K, L1 D cache: > 32K > > CPU: L2 > > > cache: > > > > 256K CPU: L3 cache: 12288K CPU 9/0x0 -> Node 0 CPU: > > Unsupported > > > number > > > > of siblings 32 installing Xen timer for CPU 10 > > Initializing > > > CPU#10 CPU: > > > > L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K > CPU: > > L3 > > > cache: > > > > 12288K CPU 10/0x0 -> Node 0 CPU: Unsupported number of > > siblings > > > 32 > > > > installing Xen timer for CPU 11 Initializing CPU#11 > CPU: > > L1 I > > > cache: > > > > 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 > cache: > > 12288K > > > CPU > > > > 11/0x0 -> Node 0 CPU: Unsupported number of siblings > 32 > > Brought > > > up 12 > > > > CPUs Grant table initialized regulator: core version > 0.5 > > Time: > > > 14:45:00 > > > > Date: 03/16/10 NET: Registered protocol family 16 > > > xenbus_probe_init ok > > > > ACPI FADT declares the system doesn't support PCIe > ASPM, > > so > > > disable it > > > > ACPI: bus type pci registered PCI: MCFG configuration > 0: > > base > > > a0000000 > > > > segment 0 buses 0 - 255 PCI: MCFG area at a0000000 > > reserved in > > > E820 PCI: > > > > Using MMCONFIG at a0000000 - afffffff PCI: Using > > configuration > > > type 1 > > > > for base access bio: create slab <bio-0> at 0 ACPI > Error: > > Field > > > [CPB3] > > > > at 96 exceeds Buffer [NULL] size 64 (bits) > > > (20090903/dsopcode-596) ACPI > > > > Error (psparse-0537): Method parse/execution failed > > [\_SB_._OSC] > > > (Node > > > > ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI: > Interpreter > > enabled > > > ACPI: > > > > (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for > interrupt > > > routing ACPI > > > > Warning: Incorrect checksum in table [ ] - 97, > should > > be DB > > > > (20090903/tbutils-314) ACPI: No dock devices found. > ACPI: > > PCI > > > Root > > > > Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# > supported > > from D0 > > > D3hot > > > > D3cold pci 0000:00:01.0: PME# disabled pci > 0000:00:02.0: > > PME# > > > supported > > > > from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled > pci > > > 0000:00:03.0: > > > > PME# supported from D0 D3hot D3cold pci 0000:00:03.0: > PME# > > > disabled pci > > > > 0000:00:04.0: PME# supported from D0 D3hot D3cold pci > > > 0000:00:04.0: PME# > > > > disabled pci 0000:00:05.0: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# > > supported from > > > D0 > > > > D3hot D3cold pci 0000:00:06.0: PME# disabled pci > > 0000:00:07.0: > > > PME# > > > > supported from D0 D3hot D3cold pci 0000:00:07.0: PME# > > disabled > > > pci > > > > 0000:00:08.0: PME# supported from D0 D3hot D3cold pci > > > 0000:00:08.0: PME# > > > > disabled pci 0000:00:09.0: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > 0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME# > > supported from > > > D0 > > > > D3hot D3cold pci 0000:00:0a.0: PME# disabled pci > > 0000:00:13.0: > > > PME# > > > > supported from D0 D3hot D3cold pci 0000:00:13.0: PME# > > disabled > > > pci > > > > 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci > > > 0000:00:1a.7: PME# > > > > disabled pci 0000:00:1c.0: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# > > supported from > > > D0 > > > > D3hot D3cold pci 0000:00:1c.4: PME# disabled pci > > 0000:00:1c.5: > > > PME# > > > > supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# > > disabled > > > pci > > > > 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci > > > 0000:00:1d.7: PME# > > > > disabled pci 0000:00:1f.0: quirk: region 0400-047f > claimed > > by > > > ICH6 > > > > ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region > 0500-053f > > claimed > > > by ICH6 > > > > GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 > PIO at > > 0680 > > > (mask > > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 > PIO > > at 0ca0 > > > (mask > > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 > PIO > > at 0600 > > > (mask > > > > 001f) pci 0000:00:1f.2: PME# supported from D3hot pci > > > 0000:00:1f.2: PME# > > > > disabled pci 0000:01:00.0: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > 0000:01:00.0: PME# disabled pci 0000:01:00.1: PME# > > supported from > > > D0 > > > > D3hot D3cold pci 0000:01:00.1: PME# disabled pci > > 0000:0c:00.0: > > > disabling > > > > ASPM on pre-1.1 PCIe device. You can enable it with > > > 'pcie_aspm=force' > > > > pci 0000:00:1e.0: transparent bridge ACPI: PCI Root > Bridge > > [PCI1] > > > > (0000:fe) ACPI: PCI Root Bridge [PCI2] (0000:ff) ACPI: > PCI > > > Interrupt > > > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: > PCI > > > Interrupt Link > > > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI > > Interrupt > > > Link > > > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI > > Interrupt > > > Link > > > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI > > Interrupt > > > Link > > > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. > > ACPI: PCI > > > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 > 15) > > ACPI: > > > PCI > > > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 > 15) > > *0, > > > disabled. > > > > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 > 11 > > 12 14 > > > 15) > > > > xenbus_probe_backend_init bus registered ok > > > xenbus_probe_frontend_init > > > > bus registered ok xen_balloon: Initialising balloon > driver > > with > > > page > > > > order 0. vgaarb: device added: > > > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none > > vgaarb: > > > loaded > > > > SCSI subsystem initialized usbcore: registered new > > interface > > > driver > > > > usbfs usbcore: registered new interface driver hub > > usbcore: > > > registered > > > > new device driver usb PCI: Using ACPI for IRQ routing > > NetLabel: > > > > Initializing NetLabel: domain hash size = 128 > NetLabel: > > > protocols = > > > > UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed > by > > default > > > > Switching to clocksource xen kstop/0 used greatest > stack > > depth: > > > 6568 > > > > bytes left kstop/1 used greatest stack depth: 6536 > bytes > > left > > > pnp: PnP > > > > ACPI init ACPI: bus type pnp registered > xen_allocate_pirq: > > > returning irq > > > > 8 for gsi 8 Already setup the GSI :8 > xen_allocate_pirq: > > returning > > > irq 13 > > > > for gsi 13 Already setup the GSI :13 pnp: PnP ACPI: > found > > 13 > > > devices > > > > ACPI: ACPI bus type pnp unregistered system 00:07: > ioport > > range > > > > 0x500-0x53f has been reserved system 00:07: ioport > range > > > 0x400-0x47f has > > > > been reserved system 00:07: ioport range 0x800-0x81f > has > > been > > > reserved > > > > system 00:07: ioport range 0x2f8-0x2ff has been > reserved > > system > > > 00:07: > > > > iomem range 0xfed1c000-0xfed8bffe could not be > reserved > > system > > > 00:07: > > > > iomem range 0xff000000-0xffffffff could not be > reserved > > system > > > 00:07: > > > > iomem range 0xfee00000-0xfeefffff has been reserved > system > > 00:07: > > > iomem > > > > range 0xfe900000-0xfe90001f has been reserved system > > 00:07: iomem > > > range > > > > 0xfea00000-0xfea0001f has been reserved system 00:07: > > iomem range > > > > 0xfed1b000-0xfed1bfff has been reserved pci > 0000:0c:00.0: > > BAR 6: > > > no > > > > parent found for of device [0xffff0000-0xffffffff] pci > > > 0000:00:01.0: PCI > > > > bridge, secondary bus 0000:01 pci 0000:00:01.0: IO > > window: > > > > 0x1000-0x1fff pci 0000:00:01.0: MEM window: > > > 0xb1900000-0xb19fffff pci > > > > 0000:00:01.0: PREFETCH window: disabled pci > > 0000:00:02.0: PCI > > > bridge, > > > > secondary bus 0000:02 pci 0000:00:02.0: IO window: > > disabled pci > > > > 0000:00:02.0: MEM window: disabled pci 0000:00:02.0: > > PREFETCH > > > > window: disabled pci 0000:00:03.0: PCI bridge, > secondary > > bus > > > 0000:03 pci > > > > 0000:00:03.0: IO window: disabled pci 0000:00:03.0: > > MEM > > > window: > > > > disabled pci 0000:00:03.0: PREFETCH window: disabled > pci > > > 0000:00:04.0: > > > > PCI bridge, secondary bus 0000:04 pci 0000:00:04.0: > IO > > window: > > > > disabled pci 0000:00:04.0: MEM window: disabled pci > > > 0000:00:04.0: > > > > PREFETCH window: disabled pci 0000:00:05.0: PCI > bridge, > > secondary > > > bus > > > > 0000:05 pci 0000:00:05.0: IO window: disabled pci > > 0000:00:05.0: > > > MEM > > > > window: disabled pci 0000:00:05.0: PREFETCH window: > > disabled > > > pci > > > > 0000:00:06.0: PCI bridge, secondary bus 0000:06 pci > > 0000:00:06.0: > > > IO > > > > window: disabled pci 0000:00:06.0: MEM window: > disabled > > pci > > > > 0000:00:06.0: PREFETCH window: disabled pci > > 0000:00:07.0: PCI > > > bridge, > > > > secondary bus 0000:07 pci 0000:00:07.0: IO window: > > disabled pci > > > > 0000:00:07.0: MEM window: disabled pci 0000:00:07.0: > > PREFETCH > > > > window: disabled pci 0000:00:08.0: PCI bridge, > secondary > > bus > > > 0000:08 pci > > > > 0000:00:08.0: IO window: disabled pci 0000:00:08.0: > > MEM > > > window: > > > > disabled pci 0000:00:08.0: PREFETCH window: disabled > pci > > > 0000:00:09.0: > > > > PCI bridge, secondary bus 0000:09 pci 0000:00:09.0: > IO > > window: > > > > 0x3000-0x3fff pci 0000:00:09.0: MEM window: > > > 0xb1b00000-0xb1cfffff pci > > > > 0000:00:09.0: PREFETCH window: > > > 0x000000b1d00000-0x000000b1efffff pci > > > > 0000:00:0a.0: PCI bridge, secondary bus 0000:0a pci > > 0000:00:0a.0: > > > IO > > > > window: disabled pci 0000:00:0a.0: MEM window: > disabled > > pci > > > > 0000:00:0a.0: PREFETCH window: disabled pci > > 0000:00:1c.0: PCI > > > bridge, > > > > secondary bus 0000:0b pci 0000:00:1c.0: IO window: > > disabled pci > > > > 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: > > PREFETCH > > > > window: disabled pci 0000:00:1c.4: PCI bridge, > secondary > > bus > > > 0000:0c pci > > > > 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: > > MEM > > > window: > > > > 0xb1000000-0xb18fffff pci 0000:00:1c.4: PREFETCH > window: > > > > 0x000000b0000000-0x000000b0ffffff pci 0000:00:1c.5: > PCI > > bridge, > > > > secondary bus 0000:0d pci 0000:00:1c.5: IO window: > > disabled pci > > > > 0000:00:1c.5: MEM window: disabled pci 0000:00:1c.5: > > PREFETCH > > > > window: disabled pci 0000:00:1e.0: PCI bridge, > secondary > > bus > > > 0000:0e pci > > > > 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: > > MEM > > > window: > > > > disabled pci 0000:00:1e.0: PREFETCH window: disabled > pci > > > 0000:00:01.0: > > > > PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci > > 0000:00:02.0: PCI > > > INT A > > > > -> GSI 29 (level, low) -> IRQ 29 pci 0000:00:03.0: PCI > INT > > A -> > > > GSI 24 > > > > (level, low) -> IRQ 24 pci 0000:00:04.0: PCI INT A -> > GSI > > 25 > > > (level, > > > > low) -> IRQ 25 pci 0000:00:05.0: PCI INT A -> GSI 26 > > (level, low) > > > -> IRQ > > > > 26 pci 0000:00:06.0: PCI INT A -> GSI 27 (level, low) > -> > > IRQ 27 > > > pci > > > > 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ > 30 > > pci > > > > 0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ > 31 > > pci > > > > 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ > 32 > > pci > > > > 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ > 33 > > pci > > > > 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ > 16 > > > > xen_allocate_pirq: returning irq 16 for gsi 16 Already > > setup the > > > GSI :16 > > > > pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> > IRQ > > 16 pci > > > > 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ > 17 > > NET: > > > Registered > > > > protocol family 2 IP route cache hash table entries: > 65536 > > > (order: 7, > > > > 524288 bytes) TCP established hash table entries: > 262144 > > (order: > > > 10, > > > > 4194304 bytes) TCP bind hash table entries: 65536 > (order: > > 10, > > > 4718592 > > > > bytes) TCP: Hash tables configured (established 262144 > > bind > > > 65536) TCP > > > > reno registered NET: Registered protocol family 1 pci > > > 0000:01:00.0: > > > > Disabling L0s pci 0000:01:00.1: Disabling L0s Trying > to > > unpack > > > rootfs > > > > image as initramfs... Freeing initrd memory: 6474k > freed > > DMA-API: > > > > preallocated 32768 debug entries DMA-API: debugging > > enabled by > > > kernel > > > > config PCI-DMA: Using software bounce buffering for IO > > (SWIOTLB) > > > DMA: > > > > Placing 64MB software IO TLB between ffff880007525000 > - > > > ffff88000b525000 > > > > DMA: software IO TLB at phys 0x7525000 - 0xb525000 > audit: > > > initializing > > > > netlink socket (disabled) type=2000 > > audit(1268750702.035:1): > > > initialized > > > > HugeTLB registered 2 MB page size, pre-allocated 0 > pages > > VFS: > > > Disk > > > > quotas dquot_6.5.2 Dquot-cache hash table entries: 512 > > (order 0, > > > 4096 > > > > bytes) msgmni has been set to 2970 cryptomgr_test used > > greatest > > > stack > > > > depth: 5864 bytes left cryptomgr_test used greatest > stack > > depth: > > > 5816 > > > > bytes left alg: No test for stdrng (krng) Block layer > SCSI > > > generic (bsg) > > > > driver version 0.4 loaded (major 252) io scheduler > noop > > > registered io > > > > scheduler anticipatory registered io scheduler > deadline > > > registered io > > > > scheduler cfq registered (default) pci_hotplug: PCI > Hot > > Plug PCI > > > Core > > > > version: 0.5 pciehp 0000:00:09.0:pcie04: HPC vendor_id > > 8086 > > > device_id > > > > 3410 ss_vid 0 ss_did 0 pciehp: PCI Express Hot Plug > > Controller > > > Driver > > > > version: 0.4 acpiphp: ACPI Hot Plug PCI Controller > Driver > > > version: 0.5 > > > > acpiphp_glue: Slot 2 already registered by another > hotplug > > driver > > > > acpiphp_glue: Slot 2 already registered by another > hotplug > > driver > > > > acpiphp_glue: Slot 2 already registered by another > hotplug > > driver > > > > acpiphp_glue: Slot 2 already registered by another > hotplug > > driver > > > > acpiphp_glue: Slot 2 already registered by another > hotplug > > driver > > > > acpiphp_glue: Slot 2 already registered by another > hotplug > > driver > > > > acpiphp_glue: Slot 2 already registered by another > hotplug > > driver > > > > acpiphp_glue: Slot 2 already registered by another > hotplug > > driver > > > > pci-stub: invalid id string "" input: Sleep Button as > > > > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 > > ACPI: > > > Sleep > > > > Button [SLPB] input: Power Button as > > > > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: > Power > > Button > > > [PWRF] > > > > registering netback hpet_acpi_add: no address or irqs > in > > _CRS > > > > Non-volatile memory driver v1.3 Linux agpgart > interface > > v0.103 > > > Serial: > > > > 8250/16550 driver, 4 ports, IRQ sharing enabled > > serial8250: ttyS1 > > > at I/O > > > > 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: > > module > > > loaded > > > > input: Macintosh mouse button emulation as > > > /devices/virtual/input/input2 > > > > ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> > IRQ > > 19 > > > ahci > > > > 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps > 0x3f > > impl > > > SATA mode > > > > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo > pio > > slum part > > > ccc > > > > ems scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : > ahci > > scsi4 : > > > ahci > > > > scsi5 : ahci ata1: SATA max UDMA/133 irq_stat > 0x00400040, > > > connection > > > > status changed irq 2996 ata2: SATA max UDMA/133 abar > > > m2048@0xb1a00000 > > > > port 0xb1a00180 irq 2996 ata3: SATA max UDMA/133 abar > > > m2048@0xb1a00000 > > > > port 0xb1a00200 irq 2996 ata4: SATA max UDMA/133 abar > > > m2048@0xb1a00000 > > > > port 0xb1a00280 irq 2996 ata5: SATA max UDMA/133 abar > > > m2048@0xb1a00000 > > > > port 0xb1a00300 irq 2996 ata6: SATA max UDMA/133 abar > > > m2048@0xb1a00000 > > > > port 0xb1a00380 irq 2996 Fixed MDIO Bus: probed > ehci_hcd: > > USB 2.0 > > > > 'Enhanced' Host Controller (EHCI) Driver ehci_hcd > > 0000:00:1a.7: > > > PCI INT > > > > C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd > 0000:00:1a.7: > > EHCI > > > Host > > > > Controller ehci_hcd 0000:00:1a.7: new USB bus > registered, > > > assigned bus > > > > number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd > > > 0000:00:1a.7: irq > > > > 18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7: USB 2.0 > > started, > > > EHCI 1.00 > > > > usb usb1: New USB device found, idVendor=1d6b, > > idProduct=0002 usb > > > usb1: > > > > New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > > usb > > > usb1: > > > > Product: EHCI Host Controller usb usb1: Manufacturer: > > Linux > > > 2.6.32.9 > > > > ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb > usb1: > > > configuration #1 > > > > chosen from 1 choice hub 1-0:1.0: USB hub found hub > > 1-0:1.0: 6 > > > ports > > > > detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 > > (level, low) > > > -> IRQ > > > > 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd > > > 0000:00:1d.7: > > > > new USB bus registered, assigned bus number 2 ehci_hcd > > > 0000:00:1d.7: > > > > debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem > > 0xb1a01000 > > > ehci_hcd > > > > 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New > USB > > device > > > found, > > > > idVendor=1d6b, idProduct=0002 usb usb2: New USB device > > strings: > > > Mfr=3, > > > > Product=2, SerialNumber=1 usb usb2: Product: EHCI Host > > Controller > > > usb > > > > usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd usb usb2: > > > SerialNumber: > > > > 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 > > choice hub > > > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected > > ohci_hcd: > > > USB 1.1 > > > > 'Open' Host Controller (OHCI) Driver uhci_hcd: USB > > Universal Host > > > > Controller Interface driver xen_allocate_pirq: > returning > > irq 16 > > > for gsi > > > > 16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0: > PCI > > INT A -> > > > GSI 16 > > > > (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: UHCI > Host > > > Controller > > > > uhci_hcd 0000:00:1a.0: new USB bus registered, > assigned > > bus > > > number 3 > > > > uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020e0 usb > > usb3: New > > > USB > > > > device found, idVendor=1d6b, idProduct=0001 usb usb3: > New > > USB > > > device > > > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: > > Product: UHCI > > > Host > > > > Controller usb usb3: Manufacturer: Linux 2.6.32.9 > uhci_hcd > > usb > > > usb3: > > > > SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 > > chosen from > > > 1 > > > > choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports > > detected > > > uhci_hcd > > > > 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ > 21 > > uhci_hcd > > > > 0000:00:1a.1: UHCI Host Controller uhci_hcd > 0000:00:1a.1: > > new USB > > > bus > > > > registered, assigned bus number 4 uhci_hcd > 0000:00:1a.1: > > irq 21, > > > io base > > > > 0x000020c0 usb usb4: New USB device found, > idVendor=1d6b, > > > idProduct=0001 > > > > usb usb4: New USB device strings: Mfr=3, Product=2, > > > SerialNumber=1 usb > > > > usb4: Product: UHCI Host Controller usb usb4: > > Manufacturer: Linux > > > > 2.6.32.9 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 > usb > > usb4: > > > > configuration #1 chosen from 1 choice hub 4-0:1.0: USB > hub > > found > > > hub > > > > 4-0:1.0: 2 ports detected xen_allocate_pirq: returning > irq > > 19 for > > > gsi 19 > > > > Already setup the GSI :19 uhci_hcd 0000:00:1a.2: PCI > INT D > > -> GSI > > > 19 > > > > (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: UHCI > Host > > > Controller > > > > uhci_hcd 0000:00:1a.2: new USB bus registered, > assigned > > bus > > > number 5 > > > > uhci_hcd 0000:00:1a.2: irq 19, io base 0x000020a0 usb > > usb5: New > > > USB > > > > device found, idVendor=1d6b, idProduct=0001 usb usb5: > New > > USB > > > device > > > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: > > Product: UHCI > > > Host > > > > Controller usb usb5: Manufacturer: Linux 2.6.32.9 > uhci_hcd > > usb > > > usb5: > > > > SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 > > chosen from > > > 1 > > > > choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports > > detected > > > > xen_allocate_pirq: returning irq 23 for gsi 23 Already > > setup the > > > GSI :23 > > > > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, > low) -> > > IRQ 23 > > > > uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd > > > 0000:00:1d.0: new > > > > USB bus registered, assigned bus number 6 uhci_hcd > > 0000:00:1d.0: > > > irq 23, > > > > io base 0x00002080 usb usb6: New USB device found, > > idVendor=1d6b, > > > > idProduct=0001 usb usb6: New USB device strings: > Mfr=3, > > > Product=2, > > > > SerialNumber=1 usb usb6: Product: UHCI Host Controller > usb > > usb6: > > > > Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb6: > > SerialNumber: > > > > 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 > > choice hub > > > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected > > > xen_allocate_pirq: > > > > returning irq 19 for gsi 19 Already setup the GSI :19 > > uhci_hcd > > > > 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ > 19 > > uhci_hcd > > > > 0000:00:1d.1: UHCI Host Controller uhci_hcd > 0000:00:1d.1: > > new USB > > > bus > > > > registered, assigned bus number 7 uhci_hcd > 0000:00:1d.1: > > irq 19, > > > io base > > > > 0x00002060 usb usb7: New USB device found, > idVendor=1d6b, > > > idProduct=0001 > > > > usb usb7: New USB device strings: Mfr=3, Product=2, > > > SerialNumber=1 usb > > > > usb7: Product: UHCI Host Controller usb usb7: > > Manufacturer: Linux > > > > 2.6.32.9 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 > usb > > usb7: > > > > configuration #1 chosen from 1 choice hub 7-0:1.0: USB > hub > > found > > > hub > > > > 7-0:1.0: 2 ports detected xen_allocate_pirq: returning > irq > > 18 for > > > gsi 18 > > > > Already setup the GSI :18 uhci_hcd 0000:00:1d.2: PCI > INT C > > -> GSI > > > 18 > > > > (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI > Host > > > Controller > > > > uhci_hcd 0000:00:1d.2: new USB bus registered, > assigned > > bus > > > number 8 > > > > uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb > > usb8: New > > > USB > > > > device found, idVendor=1d6b, idProduct=0001 usb usb8: > New > > USB > > > device > > > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: > > Product: UHCI > > > Host > > [-- Attachment #1.2: Type: text/html, Size: 93196 bytes --] [-- Attachment #2: Type: text/plain, Size: 137 bytes --] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-18 18:16 ` kishore kumar @ 2010-03-18 19:31 ` Pasi Kärkkäinen 2010-03-18 20:23 ` kishore kumar 0 siblings, 1 reply; 32+ messages in thread From: Pasi Kärkkäinen @ 2010-03-18 19:31 UTC (permalink / raw) To: kishore kumar; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore kumar wrote: > I did the below steps for pvops dom 0 kernel. > > make menuconfig > make bzImage > make modules > make modules_install > cp -a .config /boot/config-2.6.32.10 > cp -a System.map /boot/System.map-2.6.32.10 > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10 > /sbin/mkinitrd -f --builtin=ahci /boot/initrd-2.6.32.10.img 2.6.32.10 > I tried root=/dev/VolGroup01/LogVol00 . > Ok. Please run "pvdisplay" to see which actual partition is the LVM PV for your volume group. Also if you're running Fedora 12 you could try generating an initrd image with dracut instead of mkinitrd. -- Pasi > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen <[1]pasik@iki.fi> wrote: > > On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore kumar wrote: > > Here is the output of df -h and cat /etc/fstab of my machine. > > > > Did you try both root=/dev/mapper/VolGroup01-LogVol00 and > root=/dev/VolGroup01/LogVol00 arguments for the dom0 kernel? > > How did you generate the initrd image for the dom0 kernel? > > Anyway this sounds like a grub.conf or initrd problem, not Xen or pvops > dom0 kernel kernel problem. > > -- Pasi > > > Please let me know your thoughts. > > > > [root@localhost kishore]# df -h > > > > Filesystem Size Used Avail Use% Mounted on > > > > /dev/mapper/VolGroup01-LogVol00 > > > > 223G 29G 182G 14% / > > > > /dev/sda1 99M 81M 13M 87% /boot > > > > tmpfs 757M 0 757M 0% /dev/shm > > > > [root@localhost kishore]# cat /etc/fstab > > > > /dev/VolGroup01/LogVol00 / ext3 defaults 1 1 > > > > LABEL=/boot /boot ext3 defaults 1 2 > > > > tmpfs /dev/shm tmpfs defaults 0 0 > > > > devpts /dev/pts devpts gid=5,mode=620 0 0 > > > > sysfs /sys sysfs defaults 0 0 > > > > proc /proc proc defaults 0 0 > > > > /dev/VolGroup01/LogVol01 swap swap defaults 0 0 > > > > [root@localhost kishore]# > > > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen > <[1][2]pasik@iki.fi> wrote: > > > > On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore kumar wrote: > > > I am not sure. Can you please let me know how to check > this? any > > command > > > ?? > > > > well simple "df -h" will show it. and also "cat /etc/fstab". > > You can also check it from your grub configuration.. from the > working > > baremetal (non-Xen) entry. > > > > -- Pasi > > > > > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi Kärkkäinen > > <[1][2][3]pasik@iki.fi> wrote: > > > > > > On Tue, Mar 16, 2010 at 03:22:50PM -0700, kishore kumar > wrote: > > > > attached is the log captured in with the word > document . > > > > > > > > > > Scanning logical volumes > > > Reading all physical volumes. This may take a while... > > > Activating logical volumes > > > Volume group "VolGroup01" not found > > > Trying to resume from /dev/VolGroup01/LogVol01 > > > Unable to access resume device (/dev/VolGroup01/LogVol01) > > > Creating root device. > > > Mounting root filesystem. > > > mount: could not find filesystem '/dev/root' > > > Setting up other filesystems. > > > Setting up new root fs > > > setuproot: moving /dev failed: No such file or directory > > > no fstab.sys, mounting internal defaults > > > setuproot: error mounting /proc: No such file or directory > > > setuproot: error mounting /sys: No such file or directory > > > Switching to new root and running init. > > > unmounting old /dev > > > unmounting old /proc > > > unmounting old /sys > > > switchroot: mount failed: No such file or directory > > > init used greatest stack depth: 4088 bytes left > > > Kernel panic - not syncing: Attempted to kill init! > > > > > > So it seems it gets all the way to executing the initrd > image, > > > which then fails to mount the root fs. > > > > > > Earlier in the log: > > > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > > > ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA, max > UDMA/133 > > > ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth > 31/32), AA > > > ata1.00: configured for UDMA/133 > > > scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 > STBO > > PQ: 0 > > > ANSI: 5 > > > sd 0:0:0:0: Attached scsi generic sg0 type 0 > > > sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 > GB/232 > > GiB) > > > sd 0:0:0:0: [sda] Write Protect is off > > > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > > sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, > > doesn't > > > support DPO or FUA > > > sda: sda1 sda2 > > > sd 0:0:0:0: [sda] Attached SCSI disk > > > > > > so /dev/sda was detected. Is your root lvm volume on > /dev/sda ? > > > Is /dev/VolGroup01/LogVol01 really your root fs? > > > > > > -- Pasi > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi Kärkkäinen > > > <[1][2][3][4]pasik@iki.fi> wrote: > > > > > > > > On Tue, Mar 16, 2010 at 02:56:06PM -0700, kishore > kumar > > wrote: > > > > > Please find the attached log file after fixing > the > > dom 0 > > > kernel cmd > > > > line > > > > > as below > > > > > > > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 > > > earlyprintk=xen > > > > nomodeset > > > > > > > > > > > > > There's something wrong with the log, the dom0 > kernel > > parts are > > > all on > > > > one line.. > > > > It's really difficult to read it. > > > > > > > > -- Pasi > > > > > > > > > Thanks > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 2:29 PM, Pasi > Kärkkäinen > > > > <[1][2][3][4][5]pasik@iki.fi> wrote: > > > > > > > > > > On Tue, Mar 16, 2010 at 02:16:22PM -0700, > kishore > > kumar > > > wrote: > > > > > > I did below steps. > > > > > > > > > > > > > > > > > > I pulled DOM 0 kernel from > > > > > > git clone > > > > > > > > > > > > > > > git://[1][2][3][4][5][6]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > linux-2.6-xen > > > > > > > > > > > > cd linux-2.6-xen > > > > > > > > > > > > make clean > > > > > > > > > > > > cp -a .config .config-old > > > > > > > > > > > > wget -O .config > > > > > > > > > > > > > > > > > > > > > [2][3][4][5][6][7]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > > > > > make oldconfig > > > > > > > > > > > > make bzImage > > > > > > > > > > > > make modules > > > > > > > > > > > > make modules_install > > > > > > > > > > > > cp -a .config /boot/config-2.6.32.9 > > > > > > > > > > > > cp -a System.map > /boot/System.map-2.6.32.9 > > > > > > > > > > > > cp -a arch/x86/boot/bzImage > > /boot/vmlinuz-2.6.32.9 > > > > > > > > > > > > and modified the grub.conf as below > > > > > > > > > > > > > > > > > > Root(hd0,0) > > > > > > > > > > > > kernel /xen.gz console=vga,com1 > > com1=115200,8n1 > > > msi=1 > > > > iommu=1 > > > > > > > > > > > > module /vmlinuz-2.6.32.9 ro > > > root=/dev/VolGroup01/LogVo100 > > > > rhgb > > > > > quiet > > > > > > > > > > > > module /initrd-2.6.32.9.img > > > > > > > > > > > > > > > > > > and rebooted the machine. Then It > booted with > > some > > > xen > > > > messages > > > > > and > > > > > > stopped. Those were the messages > captured > > from > > > serial > > > > console. > > > > > > > > > > > > Please let me know if I did something > wrong > > here. > > > > > > > > > > > > > > > > Please fix the kernel cmdline based on my > earlier > > email, > > > and > > > > capture and > > > > > post the > > > > > serial console log again! > > > > > > > > > > -- Pasi > > > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 1:20 PM, Pasi > > Kärkkäinen > > > > > <[3][4][5][6][7][8]pasik@iki.fi> wrote: > > > > > > > > > > > > On Tue, Mar 16, 2010 at 01:16:28PM > -0700, > > Jeremy > > > > Fitzhardinge > > > > > wrote: > > > > > > > On 03/16/2010 12:48 PM, Pasi > Kärkkäinen > > wrote: > > > > > > >> On Tue, Mar 16, 2010 at 09:43:44PM > +0200, > > Pasi > > > > Kärkkäinen > > > > > wrote: > > > > > > >> > > > > > > >>> On Tue, Mar 16, 2010 at > 10:32:17AM > > -0700, > > > kishore > > > > kumar > > > > > wrote: > > > > > > >>> > > > > > > >>>> Attached is the output > captured > > from > > > serial > > > > console. > > > > > > >>>> > > > > > > >>>> Machine does not boot after > > compiling xen > > > 3.4.3 > > > > with > > > > > pv_ops dom > > > > > > 0 kernel. > > > > > > >>>> > > > > > > >>>> Please let me know what is > going > > wrong > > > here. > > > > > > >>>> > > > > > > >>>> > > > > > > >>> Ok this looks like a bug that is > already > > being > > > sorted > > > > out on > > > > > > xen-devel mailinglist. > > > > > > >>> I added CC to xen-devel. > > > > > > >>> > > > > > > >>> > > > > > > >> > > > > > > > > > > > > > > Those messages are not a problem in > > themselves, > > > but the > > > > related > > > > > > problem > > > > > > > is believed to be fixed in current > > > xen/stable-2.6.32.x. > > > > It > > > > > looks like > > > > > > > the output stops there because the > Xen > > console > > > isn't set > > > > up > > > > > properly > > > > > > for > > > > > > > some reason. > > > > > > > > > > > > > > > > > > > Yeah, remove "rhgb quiet" from the > options.. > > the > > > dom0 > > > > kernel > > > > > cmdline > > > > > > should be like this: > > > > > > ro root=/dev/VolGroup01/LogVol00 > > console=hvc0 > > > > earlyprintk=xen > > > > > nomodeset > > > > > > -- Pasi > > > > > > > > > > > > References > > > > > > > > > > > > Visible links > > > > > > 1. > > > > > > > > > > [5][6][7][8][9]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > 2. > > > > > > > > > > > > > > > [6][7][8][9][10]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > 3. mailto:[7][8][9][10][11]pasik@iki.fi > > > > > > > > > > References > > > > > > > > > > Visible links > > > > > 1. mailto:[9][10][11][12]pasik@iki.fi > > > > > 2. > > > > > > > > > > [10][11][12][13]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > 3. > > > > > > > > > > [11][12][13][14]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > 4. mailto:[12][13][14][15]pasik@iki.fi > > > > > 5. > > > > > > > > > > [13][14][15][16]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > 6. > > > > > > > > > > [14][15][16][17]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > 7. mailto:[15][16][17][18]pasik@iki.fi > > > > > Asserting Post complete GPIO!!! > > > > > Transfer control to CSM 16-bit binary for legacy > boot > > > > > __ __ _____ _ _ _____ > _ _ > > > > > \ \/ /___ _ __ |___ /| || | |___ / _ __ > ___| || | > > _ > > > __ _ > > > > __ ___ > > > > > \ // _ \ '_ \ |_ \| || |_ |_ \ __| '__/ > __| || > > |_ __| > > > '_ \| > > > > '__/ _ \ > > > > > / \ __/ | | | ___) |__ _| ___) |__| | | > (__|__ > > _|__| > > > |_) | | > > > > | __/ > > > > > /_/\_\___|_| |_| |____(_) |_|(_)____/ |_| > \___| |_| > > | > > > .__/|_| > > > > \___| > > > > > > > |_| > > > > > (XEN) Xen version 3.4.3-rc4-pre > (kishore@localdomain) > > (gcc > > > version > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar 15 > 13:44:31 PDT > > 2010 > > > > > (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 2010 > +0000 > > > > 19924:6e72f8c3c017 > > > > > (XEN) Command line: console=vga,com1 > com1=115200,8n1 > > msi=1 > > > iommu=1 > > > > > (XEN) Video information: > > > > > (XEN) VGA is text mode 80x25, font 8x16 > > > > > (XEN) VBE/DDC methods: none; EDID transfer time: > 0 > > seconds > > > > > (XEN) EDID info not retrieved because no DDC > retrieval > > method > > > > detected > > > > > (XEN) Disc information: > > > > > (XEN) Found 1 MBR signatures > > > > > (XEN) Found 1 EDD information structures > > > > > (XEN) Xen-e820 RAM map: > > > > > (XEN) 0000000000000000 - 000000000009d000 > (usable) > > > > > (XEN) 000000000009d000 - 00000000000a0000 > (reserved) > > > > > (XEN) 00000000000e0000 - 0000000000100000 > (reserved) > > > > > (XEN) 0000000000100000 - 000000006d597000 > (usable) > > > > > (XEN) 000000006d597000 - 000000006d686000 > (reserved) > > > > > (XEN) 000000006d686000 - 000000006f598000 > (usable) > > > > > (XEN) 000000006f598000 - 000000006f59a000 > (reserved) > > > > > (XEN) 000000006f59a000 - 000000006f5af000 (ACPI > NVS) > > > > > (XEN) 000000006f5af000 - 000000006f5d9000 > (reserved) > > > > > (XEN) 000000006f5d9000 - 000000006f5f9000 (ACPI > data) > > > > > (XEN) 000000006f5f9000 - 000000006f6df000 (ACPI > NVS) > > > > > (XEN) 000000006f6df000 - 000000006f700000 (ACPI > data) > > > > > (XEN) 000000006f700000 - 0000000080000000 > (reserved) > > > > > (XEN) 00000000a0000000 - 00000000b0000000 > (reserved) > > > > > (XEN) 00000000fc000000 - 00000000fd000000 > (reserved) > > > > > (XEN) 00000000fed1c000 - 00000000fed20000 > (reserved) > > > > > (XEN) 00000000ffc00000 - 0000000100000000 > (reserved) > > > > > (XEN) System RAM: 1780MB (1823000kB) > > > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL ) > > > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL THRLY > > 0 > > > > 1000013) > > > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL THRLY > > 0 > > > MSFT > > > > 100000D) > > > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL THRLY > > 3 > > > MSFT > > > > 100000D) > > > > > (XEN) ACPI: FACS 6F5F9000, 0040 > > > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL THRLY > > 0 > > > MSFT > > > > 100000D) > > > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL THRLY > > 1 > > > MSFT > > > > 100000D) > > > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL THRLY > > 1 > > > MSFT > > > > 100000D) > > > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL THRLY > > 1 > > > MSFT > > > > 100000D) > > > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL THRLY > > 0 > > > MSFT > > > > 100000D) > > > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 INTEL SSDT > PM > > 4000 > > > INTL > > > > 20061109) > > > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL THRLY > > 1 > > > MSFT > > > > 100000D) > > > > > (XEN) Domain heap initialised > > > > > (XEN) Processor #0 6:12 APIC version 21 > > > > > (XEN) Processor #2 6:12 APIC version 21 > > > > > (XEN) Processor #4 6:12 APIC version 21 > > > > > (XEN) Processor #16 6:12 APIC version 21 > > > > > (XEN) Processor #18 6:12 APIC version 21 > > > > > (XEN) Processor #20 6:12 APIC version 21 > > > > > (XEN) Processor #1 6:12 APIC version 21 > > > > > (XEN) Processor #3 6:12 APIC version 21 > > > > > (XEN) Processor #5 6:12 APIC version 21 > > > > > (XEN) Processor #17 6:12 APIC version 21 > > > > > (XEN) Processor #19 6:12 APIC version 21 > > > > > (XEN) Processor #21 6:12 APIC version 21 > > > > > (XEN) IOAPIC[0]: apic_id 8, version 32, address > > 0xfec00000, GSI > > > 0-23 > > > > > (XEN) IOAPIC[1]: apic_id 9, version 32, address > > 0xfec90000, GSI > > > 24-47 > > > > > (XEN) Enabling APIC mode: Phys. Using 2 I/O > APICs > > > > > (XEN) Intel VT-d DMAR tables have been parsed. > > > > > (XEN) Using scheduler: SMP Credit Scheduler > (credit) > > > > > (XEN) Detected 3200.207 MHz processor. > > > > > (XEN) VMX: Supported advanced features: > > > > > (XEN) - APIC MMIO access virtualisation > > > > > (XEN) - APIC TPR shadow > > > > > (XEN) - Extended Page Tables (EPT) > > > > > (XEN) - Virtual-Processor Identifiers (VPID) > > > > > (XEN) - Virtual NMI > > > > > (XEN) - MSR direct-access bitmap > > > > > (XEN) VMX: EPT is available. > > > > > (XEN) VMX: VPID is available. > > > > > (XEN) HVM: VMX enabled > > > > > (XEN) HVM: Hardware Assisted Paging detected. > > > > > (XEN) CPU0: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 1/2 eip 88000 > > > > > (XEN) CPU1: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 2/4 eip 88000 > > > > > (XEN) CPU2: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 3/16 eip 88000 > > > > > (XEN) CPU3: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 4/18 eip 88000 > > > > > (XEN) CPU4: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 5/20 eip 88000 > > > > > (XEN) CPU5: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 6/1 eip 88000 > > > > > (XEN) CPU6: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 7/3 eip 88000 > > > > > (XEN) CPU7: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 8/5 eip 88000 > > > > > (XEN) CPU8: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 9/17 eip 88000 > > > > > (XEN) CPU9: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 10/19 eip 88000 > > > > > (XEN) CPU10: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Booting processor 11/21 eip 88000 > > > > > (XEN) CPU11: Intel Genuine Intel(R) CPU > 000 > > @ > > > 3.20GHz > > > > stepping 00 > > > > > (XEN) Total of 12 processors activated. > > > > > (XEN) ENABLING IO-APIC IRQs > > > > > (XEN) -> Using new ACK method > > > > > (XEN) checking TSC synchronization across 12 > CPUs: > > passed. > > > > > (XEN) Platform timer is 14.318MHz HPET > > > > > ?(XEN) Brought up 12 CPUs > > > > > (XEN) Intel VT-d Snoop Control supported. > > > > > (XEN) Intel VT-d DMA Passthrough not supported. > > > > > (XEN) Intel VT-d Queued Invalidation supported. > > > > > (XEN) Intel VT-d Interrupt Remapping supported. > > > > > (XEN) I/O virtualisation enabled > > > > > (XEN) I/O virtualisation for PV guests disabled > > > > > (XEN) xenoprof: Initialization failed. Intel > processor > > model 44 > > > for P6 > > > > class family is not supported > > > > > (XEN) *** LOADING DOMAIN 0 *** > > > > > (XEN) Xen kernel: 64-bit, lsb, compat32 > > > > > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr > 0x1000000 -> > > > 0x26bb000 > > > > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > > > > (XEN) Dom0 alloc.: > 0000000064000000->0000000068000000 > > > (404490 pages > > > > to be allocated) > > > > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > > > > (XEN) Loaded kernel: > ffffffff81000000->ffffffff826bb000 > > > > > (XEN) Init. ramdisk: > ffffffff826bb000->ffffffff82d0d800 > > > > > (XEN) Phys-Mach map: > ffffffff82d0e000->ffffffff83044050 > > > > > (XEN) Start info: > ffffffff83045000->ffffffff830454b4 > > > > > (XEN) Page tables: > ffffffff83046000->ffffffff83063000 > > > > > (XEN) Boot stack: > ffffffff83063000->ffffffff83064000 > > > > > (XEN) TOTAL: > ffffffff80000000->ffffffff83400000 > > > > > (XEN) ENTRY ADDRESS: ffffffff819c1200 > > > > > (XEN) Dom0 has maximum 12 VCPUs > > > > > (XEN) Scrubbing Free RAM: .done. > > > > > (XEN) Xen trace buffers: disabled > > > > > (XEN) Std. Loglevel: Errors and warnings > > > > > (XEN) Guest Loglevel: Nothing (Rate-limited: > Errors and > > > warnings) > > > > > (XEN) Xen is relinquishing VGA console. > > > > > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' > three > > times to > > > switch > > > > input to Xen) > > > > > (XEN) Freed 128kB init memory. > > > > > mapping kernel into physical memory > > > > > Xen: setup ISA identity maps > > > > > about to get started... > > > > > Initializing cgroup subsys cpuset > > > > > Initializing cgroup subsys cpu > > > > > Linux version 2.6.32.9 > (kishore@localhost.localdomain) > > (gcc > > > version > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar > 15 > > 15:16:28 PDT > > > 2010 > > > > > Command line: ro root=/dev/VolGroup01/LogVol00 > > console=hvc0 > > > > earlyprintk=xen nomodeset > > > > > KERNEL supported cpus: > > > > > Intel GenuineIntel > > > > > AMD AuthenticAMD > > > > > Centaur CentaurHauls > > > > > BIOS-provided physical RAM map: > > > > > Xen: 0000000000000000 - 000000000009d000 > (usable) > > > > > Xen: 000000000009d000 - 0000000000100000 > (reserved) > > > > > Xen: 0000000000100000 - 0000000066c0a000 > (usable) > > > > > Xen: 000000006d597000 - 000000006d686000 > (reserved) > > > > > Xen: 000000006f598000 - 000000006f59a000 > (reserved) > > > > > Xen: 000000006f59a000 - 000000006f5af000 (ACPI > NVS) > > > > > Xen: 000000006f5af000 - 000000006f5d9000 > (reserved) > > > > > Xen: 000000006f5d9000 - 000000006f5f9000 (ACPI > data) > > > > > Xen: 000000006f5f9000 - 000000006f6df000 (ACPI > NVS) > > > > > Xen: 000000006f6df000 - 000000006f700000 (ACPI > data) > > > > > Xen: 000000006f700000 - 0000000080000000 > (reserved) > > > > > Xen: 00000000a0000000 - 00000000b0000000 > (reserved) > > > > > Xen: 00000000fc000000 - 00000000fd000000 > (reserved) > > > > > Xen: 00000000fed1c000 - 00000000fed20000 > (reserved) > > > > > Xen: 00000000ffc00000 - 0000000100000000 > (reserved) > > > > > bootconsole [xenboot0] enabled > > > > > DMI 2.4 present. > > > > > last_pfn = 0x66c0a max_arch_pfn = 0x400000000 > > > > > init_memory_mapping: > 0000000000000000-0000000066c0a000 > > > > > RAMDISK: 026bb000 - 02d0d800 > > > > > ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL ) > > > > > ACPI: XSDT 000000006f6fe120 00064 (v01 INTEL > THRLY > > 00000000 > > > > 01000013) > > > > > ACPI: FACP 000000006f6fd000 000F4 (v04 INTEL > THRLY > > 00000000 > > > MSFT > > > > 0100000D) > > > > > ACPI: DSDT 000000006f6f5000 074F1 (v02 INTEL > THRLY > > 00000003 > > > MSFT > > > > 0100000D) > > > > > ACPI: FACS 000000006f5f9000 00040 > > > > > ACPI: APIC 000000006f6f4000 001CC (v02 INTEL > THRLY > > 00000000 > > > MSFT > > > > 0100000D) > > > > > ACPI: MCFG 000000006f6f3000 0003C (v01 INTEL > THRLY > > 00000001 > > > MSFT > > > > 0100000D) > > > > > ACPI: HPET 000000006f6f2000 00038 (v01 INTEL > THRLY > > 00000001 > > > MSFT > > > > 0100000D) > > > > > ACPI: SLIT 000000006f6f1000 00030 (v01 INTEL > THRLY > > 00000001 > > > MSFT > > > > 0100000D) > > > > > ACPI: WDDT 000000006f6f0000 00040 (v01 INTEL > THRLY > > 00000000 > > > MSFT > > > > 0100000D) > > > > > ACPI: SSDT 000000006f5d9000 1FDDC (v01 INTEL > SSDT PM > > 00004000 > > > INTL > > > > 20061109) > > > > > ACPI: 000000006f6ee000 001D0 (v01 INTEL > THRLY > > 00000001 > > > MSFT > > > > 0100000D) > > > > > No NUMA configuration found > > > > > Faking a node at > 0000000000000000-0000000066c0a000 > > > > > Bootmem setup node 0 > 0000000000000000-0000000066c0a000 > > > > > NODE_DATA [0000000000008000 - 000000000001ffff] > > > > > bootmap [0000000000020000 - 000000000002cd87] > pages d > > > > > (9 early reservations) ==> bootmem [0000000000 - > > 0066c0a000] > > > > > #0 [0000000000 - 0000001000] BIOS data page > ==> > > [0000000000 > > > - > > > > 0000001000] > > > > > #1 [0003046000 - 0003063000] XEN PAGETABLES > ==> > > [0003046000 > > > - > > > > 0003063000] > > > > > #2 [0000006000 - 0000008000] TRAMPOLINE > ==> > > [0000006000 > > > - > > > > 0000008000] > > > > > #3 [0001000000 - 000269ae98] TEXT DATA BSS > ==> > > [0001000000 > > > - > > > > 000269ae98] > > > > > #4 [00026bb000 - 0002d0d800] RAMDISK > ==> > > [00026bb000 > > > - > > > > 0002d0d800] > > > > > #5 [0002d0e000 - 0003046000] XEN START INFO > ==> > > [0002d0e000 > > > - > > > > 0003046000] > > > > > #6 [000269b000 - 000269b011] BRK > ==> > > [000269b000 > > > - > > > > 000269b011] > > > > > #7 [0000100000 - 000041a000] PGTABLE > ==> > > [0000100000 > > > - > > > > 000041a000] > > > > > #8 [0000001000 - 0000001030] ACPI SLIT > ==> > > [0000001000 > > > - > > > > 0000001030] > > > > > found SMP MP-table at [ffff8800000fd750] fd750 > > > > > Zone PFN ranges: > > > > > DMA 0x00000000 -> 0x00001000 > > > > > DMA32 0x00001000 -> 0x00100000 > > > > > Normal 0x00100000 -> 0x00100000 > > > > > Movable zone start PFN for each node > > > > > early_node_map[2] active PFN ranges > > > > > 0: 0x00000000 -> 0x0000009d > > > > > 0: 0x00000100 -> 0x00066c0a > > > > > ACPI: PM-Timer IO Port: 0x408 > > > > > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] > enabled) > > > > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] > enabled) > > > > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] > enabled) > > > > > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] > enabled) > > > > > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] > enabled) > > > > > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] > enabled) > > > > > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] > enabled) > > > > > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] > enabled) > > > > > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] > enabled) > > > > > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] > enabled) > > > > > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] > enabled) > > > > > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] > enabled) > > > > > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] > disabled) > > > > > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] > disabled) > > > > > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] > disabled) > > > > > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] > disabled) > > > > > ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] > disabled) > > > > > ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] > disabled) > > > > > ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] > disabled) > > > > > ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] > disabled) > > > > > ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] > disabled) > > > > > ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] > disabled) > > > > > ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] > disabled) > > > > > ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] > disabled) > > > > > ACPI: LAPIC_NMI (acpi_id[0x00] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x01] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x02] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x03] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x04] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x05] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x06] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x07] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x08] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x09] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x10] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x11] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x12] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x13] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x14] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x15] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x16] high level > lint[0x1]) > > > > > ACPI: LAPIC_NMI (acpi_id[0x17] high level > lint[0x1]) > > > > > ACPI: IOAPIC (id[0x08] address[0xfec00000] > gsi_base[0]) > > > > > IOAPIC[0]: apic_id 8, version 0, address > 0xfec00000, GSI > > 0-0 > > > > > ACPI: IOAPIC (id[0x09] address[0xfec90000] > gsi_base[24]) > > > > > IOAPIC[1]: apic_id 9, version 0, address > 0xfec90000, GSI > > 24-24 > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 > dfl dfl) > > > > > ERROR: Unable to locate IOAPIC for GSI 2 > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 > high > > level) > > > > > ERROR: Unable to locate IOAPIC for GSI 9 > > > > > Using ACPI (MADT) for SMP configuration > information > > > > > ACPI: HPET id: 0x8086a401 base: 0xfed00000 > > > > > SMP: Allowing 12 CPUs, 0 hotplug CPUs > > > > > PM: Registered nosave memory: 000000000009d000 - > > > 0000000000100000 > > > > > Allocating PCI resources starting at b0000000 > (gap: > > > b0000000:4c000000) > > > > > Booting paravirtualized kernel on Xen > > > > > Xen version: 3.4.3-rc4-pre (preserve-AD) (dom0) > > > > > NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 > > nr_node_ids:1 > > > > > PERCPU: Embedded 478 pages/cpu @ffff880005ebc000 > > s1928024 r8192 > > > d21672 > > > > u1957888 > > > > > pcpu-alloc: s1928024 r8192 d21672 u1957888 > > alloc=478*4096 > > > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 > [0] 05 > > [0] 06 > > > [0] 07 > > > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 > > > > > Xen: using vcpu_info placement > > > > > Built 1 zonelists in Node order, mobility > grouping on. > > Total > > > pages: > > > > 409291 > > > > > Policy zone: DMA32 > > > > > Kernel command line: ro > root=/dev/VolGroup01/LogVol00 > > > console=hvc0 > > > > earlyprintk=xen nomodeset > > > > > PID hash table entries: 4096 (order: 3, 32768 > bytes) > > > > > Initializing CPU#0 > > > > > DMA: Placing 64MB software IO TLB between > > ffff880007525000 - > > > > ffff88000b525000 > > > > > DMA: software IO TLB at phys 0x7525000 - > 0xb525000 > > > > > xen_swiotlb_fixup: buf=ffff880007525000 > size=67108864 > > > > > xen_swiotlb_fixup: buf=ffff88000b585000 > size=32768 > > > > > Memory: 1514268k/1683496k available (4654k kernel > code, > > 396k > > > absent, > > > > 168832k reserved, 3443k data, 3396k init) > > > > > SLUB: Genslabs=14, HWalign=64, Order=0-3, > MinObjects=0, > > > CPUs=12, > > > > Nodes=1 > > > > > Hierarchical RCU implementation. > > > > > NR_IRQS:4352 nr_irqs:3072 > > > > > Already setup the GSI :0 > > > > > Already setup the GSI :1 > > > > > Already setup the GSI :2 > > > > > Already setup the GSI :3 > > > > > Already setup the GSI :4 > > > > > Already setup the GSI :5 > > > > > Already setup the GSI :6 > > > > > Already setup the GSI :7 > > > > > Already setup the GSI :8 > > > > > Already setup the GSI :9 > > > > > Already setup the GSI :10 > > > > > Already setup the GSI :11 > > > > > Already setup the GSI :12 > > > > > Already setup the GSI :13 > > > > > Already setup the GSI :14 > > > > > Already setup the GSI :15 > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 > dfl dfl) > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 > high > > level) > > > > > xen: sci override: source_irq=9 global_irq=9 > trigger=c > > > polarity=1 > > > > > xen_allocate_pirq: returning irq 9 for gsi 9 > > > > > Already setup the GSI :9 > > > > > xen: acpi sci 9 > > > > > Console: colour VGA+ 80x25 > > > > > console [hvc0] enabled, bootconsole disabled > console > > [hvc0] > > > enabled, > > > > bootconsole disabled > > > > > Lock dependency validator: Copyright (c) 2006 Red > Hat, > > Inc., > > > Ingo > > > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... > MAX_LOCK_DEPTH: > > > 48 > > > > ... MAX_LOCKDEP_KEYS: 8191 ... > CLASSHASH_SIZE: > > > 4096 ... > > > > MAX_LOCKDEP_ENTRIES: 16384 ... > MAX_LOCKDEP_CHAINS: > > 32768 > > > ... > > > > CHAINHASH_SIZE: 16384 memory used by lock > > dependency > > > info: > > > > 6367 kB per task-struct memory footprint: 2688 > bytes > > allocated > > > 17039360 > > > > bytes of page_cgroup please try > 'cgroup_disable=memory' > > option if > > > you > > > > don't want memory cgroups installing Xen timer for > CPU 0 > > Detected > > > > 3200.206 MHz processor. Calibrating delay loop > (skipped), > > value > > > > calculated using timer frequency.. 6400.41 BogoMIPS > > (lpj=3200206) > > > > Security Framework initialized SELinux: > Initializing. > > Dentry > > > cache hash > > > > table entries: 262144 (order: 9, 2097152 bytes) > > Inode-cache hash > > > table > > > > entries: 131072 (order: 8, 1048576 bytes) > Mount-cache hash > > table > > > > entries: 256 Initializing cgroup subsys ns > Initializing > > cgroup > > > subsys > > > > cpuacct Initializing cgroup subsys memory > Initializing > > cgroup > > > subsys > > > > devices Initializing cgroup subsys freezer > Initializing > > cgroup > > > subsys > > > > net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: > L2 > > cache: 256K > > > CPU: > > > > L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU: > Unsupported > > number of > > > siblings > > > > 32 Performance Events: unsupported p6 CPU model 44 > no PMU > > driver, > > > > software events only. lockdep: fixing up > alternatives. SMP > > > alternatives: > > > > switching to UP code ACPI: Core revision 20090903 > ftrace: > > > converting > > > > mcount calls to 0f 1f 44 00 00 ftrace: allocating > 27971 > > entries > > > in 110 > > > > pages installing Xen timer for CPU 1 lockdep: > fixing up > > > alternatives. > > > > SMP alternatives: switching to SMP code > Initializing CPU#1 > > CPU: > > > L1 I > > > > cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K > CPU: L3 > > cache: > > > 12288K > > > > CPU 1/0x0 -> Node 0 CPU: Unsupported number of > siblings 32 > > > installing > > > > Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I > cache: > > 32K, L1 D > > > cache: > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU > 2/0x0 -> > > Node 0 > > > CPU: > > > > Unsupported number of siblings 32 installing Xen > timer for > > CPU 3 > > > > Initializing CPU#3 CPU: L1 I cache: 32K, L1 D > cache: 32K > > CPU: L2 > > > cache: > > > > 256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node 0 CPU: > > Unsupported > > > number > > > > of siblings 32 installing Xen timer for CPU 4 > Initializing > > CPU#4 > > > CPU: L1 > > > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K > CPU: L3 > > cache: > > > 12288K > > > > CPU 4/0x0 -> Node 0 CPU: Unsupported number of > siblings 32 > > > installing > > > > Xen timer for CPU 5 Initializing CPU#5 CPU: L1 I > cache: > > 32K, L1 D > > > cache: > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU > 5/0x0 -> > > Node 0 > > > CPU: > > > > Unsupported number of siblings 32 installing Xen > timer for > > CPU 6 > > > > Initializing CPU#6 CPU: L1 I cache: 32K, L1 D > cache: 32K > > CPU: L2 > > > cache: > > > > 256K CPU: L3 cache: 12288K CPU 6/0x0 -> Node 0 CPU: > > Unsupported > > > number > > > > of siblings 32 installing Xen timer for CPU 7 > Initializing > > CPU#7 > > > CPU: L1 > > > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K > CPU: L3 > > cache: > > > 12288K > > > > CPU 7/0x0 -> Node 0 CPU: Unsupported number of > siblings 32 > > > installing > > > > Xen timer for CPU 8 Initializing CPU#8 CPU: L1 I > cache: > > 32K, L1 D > > > cache: > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU > 8/0x0 -> > > Node 0 > > > CPU: > > > > Unsupported number of siblings 32 installing Xen > timer for > > CPU 9 > > > > Initializing CPU#9 CPU: L1 I cache: 32K, L1 D > cache: 32K > > CPU: L2 > > > cache: > > > > 256K CPU: L3 cache: 12288K CPU 9/0x0 -> Node 0 CPU: > > Unsupported > > > number > > > > of siblings 32 installing Xen timer for CPU 10 > > Initializing > > > CPU#10 CPU: > > > > L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: > 256K CPU: > > L3 > > > cache: > > > > 12288K CPU 10/0x0 -> Node 0 CPU: Unsupported number > of > > siblings > > > 32 > > > > installing Xen timer for CPU 11 Initializing CPU#11 > CPU: > > L1 I > > > cache: > > > > 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 > cache: > > 12288K > > > CPU > > > > 11/0x0 -> Node 0 CPU: Unsupported number of > siblings 32 > > Brought > > > up 12 > > > > CPUs Grant table initialized regulator: core > version 0.5 > > Time: > > > 14:45:00 > > > > Date: 03/16/10 NET: Registered protocol family 16 > > > xenbus_probe_init ok > > > > ACPI FADT declares the system doesn't support PCIe > ASPM, > > so > > > disable it > > > > ACPI: bus type pci registered PCI: MCFG > configuration 0: > > base > > > a0000000 > > > > segment 0 buses 0 - 255 PCI: MCFG area at a0000000 > > reserved in > > > E820 PCI: > > > > Using MMCONFIG at a0000000 - afffffff PCI: Using > > configuration > > > type 1 > > > > for base access bio: create slab <bio-0> at 0 ACPI > Error: > > Field > > > [CPB3] > > > > at 96 exceeds Buffer [NULL] size 64 (bits) > > > (20090903/dsopcode-596) ACPI > > > > Error (psparse-0537): Method parse/execution failed > > [\_SB_._OSC] > > > (Node > > > > ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI: > Interpreter > > enabled > > > ACPI: > > > > (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for > interrupt > > > routing ACPI > > > > Warning: Incorrect checksum in table [ ] - 97, > should > > be DB > > > > (20090903/tbutils-314) ACPI: No dock devices found. > ACPI: > > PCI > > > Root > > > > Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# > supported > > from D0 > > > D3hot > > > > D3cold pci 0000:00:01.0: PME# disabled pci > 0000:00:02.0: > > PME# > > > supported > > > > from D0 D3hot D3cold pci 0000:00:02.0: PME# > disabled pci > > > 0000:00:03.0: > > > > PME# supported from D0 D3hot D3cold pci > 0000:00:03.0: PME# > > > disabled pci > > > > 0000:00:04.0: PME# supported from D0 D3hot D3cold > pci > > > 0000:00:04.0: PME# > > > > disabled pci 0000:00:05.0: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# > > supported from > > > D0 > > > > D3hot D3cold pci 0000:00:06.0: PME# disabled pci > > 0000:00:07.0: > > > PME# > > > > supported from D0 D3hot D3cold pci 0000:00:07.0: > PME# > > disabled > > > pci > > > > 0000:00:08.0: PME# supported from D0 D3hot D3cold > pci > > > 0000:00:08.0: PME# > > > > disabled pci 0000:00:09.0: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > 0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME# > > supported from > > > D0 > > > > D3hot D3cold pci 0000:00:0a.0: PME# disabled pci > > 0000:00:13.0: > > > PME# > > > > supported from D0 D3hot D3cold pci 0000:00:13.0: > PME# > > disabled > > > pci > > > > 0000:00:1a.7: PME# supported from D0 D3hot D3cold > pci > > > 0000:00:1a.7: PME# > > > > disabled pci 0000:00:1c.0: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# > > supported from > > > D0 > > > > D3hot D3cold pci 0000:00:1c.4: PME# disabled pci > > 0000:00:1c.5: > > > PME# > > > > supported from D0 D3hot D3cold pci 0000:00:1c.5: > PME# > > disabled > > > pci > > > > 0000:00:1d.7: PME# supported from D0 D3hot D3cold > pci > > > 0000:00:1d.7: PME# > > > > disabled pci 0000:00:1f.0: quirk: region 0400-047f > claimed > > by > > > ICH6 > > > > ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region > 0500-053f > > claimed > > > by ICH6 > > > > GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 > PIO at > > 0680 > > > (mask > > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode > 2 PIO > > at 0ca0 > > > (mask > > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode > 3 PIO > > at 0600 > > > (mask > > > > 001f) pci 0000:00:1f.2: PME# supported from D3hot > pci > > > 0000:00:1f.2: PME# > > > > disabled pci 0000:01:00.0: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > 0000:01:00.0: PME# disabled pci 0000:01:00.1: PME# > > supported from > > > D0 > > > > D3hot D3cold pci 0000:01:00.1: PME# disabled pci > > 0000:0c:00.0: > > > disabling > > > > ASPM on pre-1.1 PCIe device. You can enable it > with > > > 'pcie_aspm=force' > > > > pci 0000:00:1e.0: transparent bridge ACPI: PCI Root > Bridge > > [PCI1] > > > > (0000:fe) ACPI: PCI Root Bridge [PCI2] (0000:ff) > ACPI: PCI > > > Interrupt > > > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > ACPI: PCI > > > Interrupt Link > > > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI > > Interrupt > > > Link > > > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI > > Interrupt > > > Link > > > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI > > Interrupt > > > Link > > > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, > disabled. > > ACPI: PCI > > > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 > 14 15) > > ACPI: > > > PCI > > > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 > 15) > > *0, > > > disabled. > > > > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 > *10 11 > > 12 14 > > > 15) > > > > xenbus_probe_backend_init bus registered ok > > > xenbus_probe_frontend_init > > > > bus registered ok xen_balloon: Initialising balloon > driver > > with > > > page > > > > order 0. vgaarb: device added: > > > > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none > > vgaarb: > > > loaded > > > > SCSI subsystem initialized usbcore: registered new > > interface > > > driver > > > > usbfs usbcore: registered new interface driver hub > > usbcore: > > > registered > > > > new device driver usb PCI: Using ACPI for IRQ > routing > > NetLabel: > > > > Initializing NetLabel: domain hash size = 128 > NetLabel: > > > protocols = > > > > UNLABELED CIPSOv4 NetLabel: unlabeled traffic > allowed by > > default > > > > Switching to clocksource xen kstop/0 used greatest > stack > > depth: > > > 6568 > > > > bytes left kstop/1 used greatest stack depth: 6536 > bytes > > left > > > pnp: PnP > > > > ACPI init ACPI: bus type pnp registered > xen_allocate_pirq: > > > returning irq > > > > 8 for gsi 8 Already setup the GSI :8 > xen_allocate_pirq: > > returning > > > irq 13 > > > > for gsi 13 Already setup the GSI :13 pnp: PnP ACPI: > found > > 13 > > > devices > > > > ACPI: ACPI bus type pnp unregistered system 00:07: > ioport > > range > > > > 0x500-0x53f has been reserved system 00:07: ioport > range > > > 0x400-0x47f has > > > > been reserved system 00:07: ioport range > 0x800-0x81f has > > been > > > reserved > > > > system 00:07: ioport range 0x2f8-0x2ff has been > reserved > > system > > > 00:07: > > > > iomem range 0xfed1c000-0xfed8bffe could not be > reserved > > system > > > 00:07: > > > > iomem range 0xff000000-0xffffffff could not be > reserved > > system > > > 00:07: > > > > iomem range 0xfee00000-0xfeefffff has been reserved > system > > 00:07: > > > iomem > > > > range 0xfe900000-0xfe90001f has been reserved > system > > 00:07: iomem > > > range > > > > 0xfea00000-0xfea0001f has been reserved system > 00:07: > > iomem range > > > > 0xfed1b000-0xfed1bfff has been reserved pci > 0000:0c:00.0: > > BAR 6: > > > no > > > > parent found for of device [0xffff0000-0xffffffff] > pci > > > 0000:00:01.0: PCI > > > > bridge, secondary bus 0000:01 pci 0000:00:01.0: > IO > > window: > > > > 0x1000-0x1fff pci 0000:00:01.0: MEM window: > > > 0xb1900000-0xb19fffff pci > > > > 0000:00:01.0: PREFETCH window: disabled pci > > 0000:00:02.0: PCI > > > bridge, > > > > secondary bus 0000:02 pci 0000:00:02.0: IO > window: > > disabled pci > > > > 0000:00:02.0: MEM window: disabled pci > 0000:00:02.0: > > PREFETCH > > > > window: disabled pci 0000:00:03.0: PCI bridge, > secondary > > bus > > > 0000:03 pci > > > > 0000:00:03.0: IO window: disabled pci > 0000:00:03.0: > > MEM > > > window: > > > > disabled pci 0000:00:03.0: PREFETCH window: > disabled pci > > > 0000:00:04.0: > > > > PCI bridge, secondary bus 0000:04 pci 0000:00:04.0: > IO > > window: > > > > disabled pci 0000:00:04.0: MEM window: disabled > pci > > > 0000:00:04.0: > > > > PREFETCH window: disabled pci 0000:00:05.0: PCI > bridge, > > secondary > > > bus > > > > 0000:05 pci 0000:00:05.0: IO window: disabled pci > > 0000:00:05.0: > > > MEM > > > > window: disabled pci 0000:00:05.0: PREFETCH > window: > > disabled > > > pci > > > > 0000:00:06.0: PCI bridge, secondary bus 0000:06 pci > > 0000:00:06.0: > > > IO > > > > window: disabled pci 0000:00:06.0: MEM window: > disabled > > pci > > > > 0000:00:06.0: PREFETCH window: disabled pci > > 0000:00:07.0: PCI > > > bridge, > > > > secondary bus 0000:07 pci 0000:00:07.0: IO > window: > > disabled pci > > > > 0000:00:07.0: MEM window: disabled pci > 0000:00:07.0: > > PREFETCH > > > > window: disabled pci 0000:00:08.0: PCI bridge, > secondary > > bus > > > 0000:08 pci > > > > 0000:00:08.0: IO window: disabled pci > 0000:00:08.0: > > MEM > > > window: > > > > disabled pci 0000:00:08.0: PREFETCH window: > disabled pci > > > 0000:00:09.0: > > > > PCI bridge, secondary bus 0000:09 pci 0000:00:09.0: > IO > > window: > > > > 0x3000-0x3fff pci 0000:00:09.0: MEM window: > > > 0xb1b00000-0xb1cfffff pci > > > > 0000:00:09.0: PREFETCH window: > > > 0x000000b1d00000-0x000000b1efffff pci > > > > 0000:00:0a.0: PCI bridge, secondary bus 0000:0a pci > > 0000:00:0a.0: > > > IO > > > > window: disabled pci 0000:00:0a.0: MEM window: > disabled > > pci > > > > 0000:00:0a.0: PREFETCH window: disabled pci > > 0000:00:1c.0: PCI > > > bridge, > > > > secondary bus 0000:0b pci 0000:00:1c.0: IO > window: > > disabled pci > > > > 0000:00:1c.0: MEM window: disabled pci > 0000:00:1c.0: > > PREFETCH > > > > window: disabled pci 0000:00:1c.4: PCI bridge, > secondary > > bus > > > 0000:0c pci > > > > 0000:00:1c.4: IO window: disabled pci > 0000:00:1c.4: > > MEM > > > window: > > > > 0xb1000000-0xb18fffff pci 0000:00:1c.4: PREFETCH > window: > > > > 0x000000b0000000-0x000000b0ffffff pci 0000:00:1c.5: > PCI > > bridge, > > > > secondary bus 0000:0d pci 0000:00:1c.5: IO > window: > > disabled pci > > > > 0000:00:1c.5: MEM window: disabled pci > 0000:00:1c.5: > > PREFETCH > > > > window: disabled pci 0000:00:1e.0: PCI bridge, > secondary > > bus > > > 0000:0e pci > > > > 0000:00:1e.0: IO window: disabled pci > 0000:00:1e.0: > > MEM > > > window: > > > > disabled pci 0000:00:1e.0: PREFETCH window: > disabled pci > > > 0000:00:01.0: > > > > PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci > > 0000:00:02.0: PCI > > > INT A > > > > -> GSI 29 (level, low) -> IRQ 29 pci 0000:00:03.0: > PCI INT > > A -> > > > GSI 24 > > > > (level, low) -> IRQ 24 pci 0000:00:04.0: PCI INT A > -> GSI > > 25 > > > (level, > > > > low) -> IRQ 25 pci 0000:00:05.0: PCI INT A -> GSI > 26 > > (level, low) > > > -> IRQ > > > > 26 pci 0000:00:06.0: PCI INT A -> GSI 27 (level, > low) -> > > IRQ 27 > > > pci > > > > 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> > IRQ 30 > > pci > > > > 0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> > IRQ 31 > > pci > > > > 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> > IRQ 32 > > pci > > > > 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> > IRQ 33 > > pci > > > > 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> > IRQ 16 > > > > xen_allocate_pirq: returning irq 16 for gsi 16 > Already > > setup the > > > GSI :16 > > > > pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) > -> IRQ > > 16 pci > > > > 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> > IRQ 17 > > NET: > > > Registered > > > > protocol family 2 IP route cache hash table > entries: 65536 > > > (order: 7, > > > > 524288 bytes) TCP established hash table entries: > 262144 > > (order: > > > 10, > > > > 4194304 bytes) TCP bind hash table entries: 65536 > (order: > > 10, > > > 4718592 > > > > bytes) TCP: Hash tables configured (established > 262144 > > bind > > > 65536) TCP > > > > reno registered NET: Registered protocol family 1 > pci > > > 0000:01:00.0: > > > > Disabling L0s pci 0000:01:00.1: Disabling L0s > Trying to > > unpack > > > rootfs > > > > image as initramfs... Freeing initrd memory: 6474k > freed > > DMA-API: > > > > preallocated 32768 debug entries DMA-API: debugging > > enabled by > > > kernel > > > > config PCI-DMA: Using software bounce buffering for > IO > > (SWIOTLB) > > > DMA: > > > > Placing 64MB software IO TLB between > ffff880007525000 - > > > ffff88000b525000 > > > > DMA: software IO TLB at phys 0x7525000 - 0xb525000 > audit: > > > initializing > > > > netlink socket (disabled) type=2000 > > audit(1268750702.035:1): > > > initialized > > > > HugeTLB registered 2 MB page size, pre-allocated 0 > pages > > VFS: > > > Disk > > > > quotas dquot_6.5.2 Dquot-cache hash table entries: > 512 > > (order 0, > > > 4096 > > > > bytes) msgmni has been set to 2970 cryptomgr_test > used > > greatest > > > stack > > > > depth: 5864 bytes left cryptomgr_test used greatest > stack > > depth: > > > 5816 > > > > bytes left alg: No test for stdrng (krng) Block > layer SCSI > > > generic (bsg) > > > > driver version 0.4 loaded (major 252) io scheduler > noop > > > registered io > > > > scheduler anticipatory registered io scheduler > deadline > > > registered io > > > > scheduler cfq registered (default) pci_hotplug: PCI > Hot > > Plug PCI > > > Core > > > > version: 0.5 pciehp 0000:00:09.0:pcie04: HPC > vendor_id > > 8086 > > > device_id > > > > 3410 ss_vid 0 ss_did 0 pciehp: PCI Express Hot Plug > > Controller > > > Driver > > > > version: 0.4 acpiphp: ACPI Hot Plug PCI Controller > Driver > > > version: 0.5 > > > > acpiphp_glue: Slot 2 already registered by another > hotplug > > driver > > > > acpiphp_glue: Slot 2 already registered by another > hotplug > > driver > > > > acpiphp_glue: Slot 2 already registered by another > hotplug > > driver > > > > acpiphp_glue: Slot 2 already registered by another > hotplug > > driver > > > > acpiphp_glue: Slot 2 already registered by another > hotplug > > driver > > > > acpiphp_glue: Slot 2 already registered by another > hotplug > > driver > > > > acpiphp_glue: Slot 2 already registered by another > hotplug > > driver > > > > acpiphp_glue: Slot 2 already registered by another > hotplug > > driver > > > > pci-stub: invalid id string "" input: Sleep Button > as > > > > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 > > ACPI: > > > Sleep > > > > Button [SLPB] input: Power Button as > > > > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: > Power > > Button > > > [PWRF] > > > > registering netback hpet_acpi_add: no address or > irqs in > > _CRS > > > > Non-volatile memory driver v1.3 Linux agpgart > interface > > v0.103 > > > Serial: > > > > 8250/16550 driver, 4 ports, IRQ sharing enabled > > serial8250: ttyS1 > > > at I/O > > > > 0x2f8 (irq = 3) is a 16550A brd: module loaded > loop: > > module > > > loaded > > > > input: Macintosh mouse button emulation as > > > /devices/virtual/input/input2 > > > > ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) > -> IRQ > > 19 > > > ahci > > > > 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 > Gbps 0x3f > > impl > > > SATA mode > > > > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo > pio > > slum part > > > ccc > > > > ems scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : > ahci > > scsi4 : > > > ahci > > > > scsi5 : ahci ata1: SATA max UDMA/133 irq_stat > 0x00400040, > > > connection > > > > status changed irq 2996 ata2: SATA max UDMA/133 > abar > > > m2048@0xb1a00000 > > > > port 0xb1a00180 irq 2996 ata3: SATA max UDMA/133 > abar > > > m2048@0xb1a00000 > > > > port 0xb1a00200 irq 2996 ata4: SATA max UDMA/133 > abar > > > m2048@0xb1a00000 > > > > port 0xb1a00280 irq 2996 ata5: SATA max UDMA/133 > abar > > > m2048@0xb1a00000 > > > > port 0xb1a00300 irq 2996 ata6: SATA max UDMA/133 > abar > > > m2048@0xb1a00000 > > > > port 0xb1a00380 irq 2996 Fixed MDIO Bus: probed > ehci_hcd: > > USB 2.0 > > > > 'Enhanced' Host Controller (EHCI) Driver ehci_hcd > > 0000:00:1a.7: > > > PCI INT > > > > C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd > 0000:00:1a.7: > > EHCI > > > Host > > > > Controller ehci_hcd 0000:00:1a.7: new USB bus > registered, > > > assigned bus > > > > number 1 ehci_hcd 0000:00:1a.7: debug port 1 > ehci_hcd > > > 0000:00:1a.7: irq > > > > 18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7: USB > 2.0 > > started, > > > EHCI 1.00 > > > > usb usb1: New USB device found, idVendor=1d6b, > > idProduct=0002 usb > > > usb1: > > > > New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > > usb > > > usb1: > > > > Product: EHCI Host Controller usb usb1: > Manufacturer: > > Linux > > > 2.6.32.9 > > > > ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb > usb1: > > > configuration #1 > > > > chosen from 1 choice hub 1-0:1.0: USB hub found hub > > 1-0:1.0: 6 > > > ports > > > > detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 > > (level, low) > > > -> IRQ > > > > 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd > > > 0000:00:1d.7: > > > > new USB bus registered, assigned bus number 2 > ehci_hcd > > > 0000:00:1d.7: > > > > debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem > > 0xb1a01000 > > > ehci_hcd > > > > 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: > New USB > > device > > > found, > > > > idVendor=1d6b, idProduct=0002 usb usb2: New USB > device > > strings: > > > Mfr=3, > > > > Product=2, SerialNumber=1 usb usb2: Product: EHCI > Host > > Controller > > > usb > > > > usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd usb > usb2: > > > SerialNumber: > > > > 0000:00:1d.7 usb usb2: configuration #1 chosen from > 1 > > choice hub > > > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports > detected > > ohci_hcd: > > > USB 1.1 > > > > 'Open' Host Controller (OHCI) Driver uhci_hcd: USB > > Universal Host > > > > Controller Interface driver xen_allocate_pirq: > returning > > irq 16 > > > for gsi > > > > 16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0: > PCI > > INT A -> > > > GSI 16 > > > > (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: UHCI > Host > > > Controller > > > > uhci_hcd 0000:00:1a.0: new USB bus registered, > assigned > > bus > > > number 3 > > > > uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020e0 > usb > > usb3: New > > > USB > > > > device found, idVendor=1d6b, idProduct=0001 usb > usb3: New > > USB > > > device > > > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: > > Product: UHCI > > > Host > > > > Controller usb usb3: Manufacturer: Linux 2.6.32.9 > uhci_hcd > > usb > > > usb3: > > > > SerialNumber: 0000:00:1a.0 usb usb3: configuration > #1 > > chosen from > > > 1 > > > > choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 > ports > > detected > > > uhci_hcd > > > > 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> > IRQ 21 > > uhci_hcd > > > > 0000:00:1a.1: UHCI Host Controller uhci_hcd > 0000:00:1a.1: > > new USB > > > bus > > > > registered, assigned bus number 4 uhci_hcd > 0000:00:1a.1: > > irq 21, > > > io base > > > > 0x000020c0 usb usb4: New USB device found, > idVendor=1d6b, > > > idProduct=0001 > > > > usb usb4: New USB device strings: Mfr=3, Product=2, > > > SerialNumber=1 usb > > > > usb4: Product: UHCI Host Controller usb usb4: > > Manufacturer: Linux > > > > 2.6.32.9 uhci_hcd usb usb4: SerialNumber: > 0000:00:1a.1 usb > > usb4: > > > > configuration #1 chosen from 1 choice hub 4-0:1.0: > USB hub > > found > > > hub > > > > 4-0:1.0: 2 ports detected xen_allocate_pirq: > returning irq > > 19 for > > > gsi 19 > > > > Already setup the GSI :19 uhci_hcd 0000:00:1a.2: > PCI INT D > > -> GSI > > > 19 > > > > (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: UHCI > Host > > > Controller > > > > uhci_hcd 0000:00:1a.2: new USB bus registered, > assigned > > bus > > > number 5 > > > > uhci_hcd 0000:00:1a.2: irq 19, io base 0x000020a0 > usb > > usb5: New > > > USB > > > > device found, idVendor=1d6b, idProduct=0001 usb > usb5: New > > USB > > > device > > > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: > > Product: UHCI > > > Host > > > > Controller usb usb5: Manufacturer: Linux 2.6.32.9 > uhci_hcd > > usb > > > usb5: > > > > SerialNumber: 0000:00:1a.2 usb usb5: configuration > #1 > > chosen from > > > 1 > > > > choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 > ports > > detected > > > > xen_allocate_pirq: returning irq 23 for gsi 23 > Already > > setup the > > > GSI :23 > > > > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, > low) -> > > IRQ 23 > > > > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd > > > 0000:00:1d.0: new > > > > USB bus registered, assigned bus number 6 uhci_hcd > > 0000:00:1d.0: > > > irq 23, > > > > io base 0x00002080 usb usb6: New USB device found, > > idVendor=1d6b, > > > > idProduct=0001 usb usb6: New USB device strings: > Mfr=3, > > > Product=2, > > > > SerialNumber=1 usb usb6: Product: UHCI Host > Controller usb > > usb6: > > > > Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb6: > > SerialNumber: > > > > 0000:00:1d.0 usb usb6: configuration #1 chosen from > 1 > > choice hub > > > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports > detected > > > xen_allocate_pirq: > > > > returning irq 19 for gsi 19 Already setup the GSI > :19 > > uhci_hcd > > > > 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> > IRQ 19 > > uhci_hcd > > > > 0000:00:1d.1: UHCI Host Controller uhci_hcd > 0000:00:1d.1: > > new USB > > > bus > > > > registered, assigned bus number 7 uhci_hcd > 0000:00:1d.1: > > irq 19, > > > io base > > > > 0x00002060 usb usb7: New USB device found, > idVendor=1d6b, > > > idProduct=0001 > > > > usb usb7: New USB device strings: Mfr=3, Product=2, > > > SerialNumber=1 usb > > > > usb7: Product: UHCI Host Controller usb usb7: > > Manufacturer: Linux > > > > 2.6.32.9 uhci_hcd usb usb7: SerialNumber: > 0000:00:1d.1 usb > > usb7: > > > > configuration #1 chosen from 1 choice hub 7-0:1.0: > USB hub > > found > > > hub > > > > 7-0:1.0: 2 ports detected xen_allocate_pirq: > returning irq > > 18 for > > > gsi 18 > > > > Already setup the GSI :18 uhci_hcd 0000:00:1d.2: > PCI INT C > > -> GSI > > > 18 > > > > (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI > Host > > > Controller > > > > uhci_hcd 0000:00:1d.2: new USB bus registered, > assigned > > bus > > > number 8 > > > > uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 > usb > > usb8: New > > > USB > > > > device found, idVendor=1d6b, idProduct=0001 usb > usb8: New > > USB > > > device > > > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: > > Product: UHCI > > > Host > > > > References > > Visible links > 1. mailto:pasik@iki.fi > 2. mailto:pasik@iki.fi > 3. mailto:pasik@iki.fi > 4. mailto:pasik@iki.fi > 5. mailto:pasik@iki.fi > 6. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 7. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 8. mailto:pasik@iki.fi > 9. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 10. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 11. mailto:pasik@iki.fi > 12. mailto:pasik@iki.fi > 13. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 14. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 15. mailto:pasik@iki.fi > 16. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 17. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 18. mailto:pasik@iki.fi ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-18 19:31 ` Pasi Kärkkäinen @ 2010-03-18 20:23 ` kishore kumar 2010-03-18 21:27 ` Pasi Kärkkäinen 0 siblings, 1 reply; 32+ messages in thread From: kishore kumar @ 2010-03-18 20:23 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users [-- Attachment #1.1: Type: text/plain, Size: 95314 bytes --] pvdisplay does not work in my RHEL machine. I did pvscan. below is the output. PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free] Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no VG: 0 [0 ] On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote: > On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore kumar wrote: > > I did the below steps for pvops dom 0 kernel. > > > > make menuconfig > > make bzImage > > make modules > > make modules_install > > cp -a .config /boot/config-2.6.32.10 > > cp -a System.map /boot/System.map-2.6.32.10 > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10 > > /sbin/mkinitrd -f --builtin=ahci /boot/initrd-2.6.32.10.img 2.6.32.10 > > I tried root=/dev/VolGroup01/LogVol00 . > > > > Ok. > > Please run "pvdisplay" to see which actual partition is the LVM PV for your > volume group. > > Also if you're running Fedora 12 you could try generating an initrd image > with dracut instead of mkinitrd. > > -- Pasi > > > > > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen <[1]pasik@iki.fi> > wrote: > > > > On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore kumar wrote: > > > Here is the output of df -h and cat /etc/fstab of my machine. > > > > > > > Did you try both root=/dev/mapper/VolGroup01-LogVol00 and > > root=/dev/VolGroup01/LogVol00 arguments for the dom0 kernel? > > > > How did you generate the initrd image for the dom0 kernel? > > > > Anyway this sounds like a grub.conf or initrd problem, not Xen or > pvops > > dom0 kernel kernel problem. > > > > -- Pasi > > > > > Please let me know your thoughts. > > > > > > [root@localhost kishore]# df -h > > > > > > Filesystem Size Used Avail Use% Mounted on > > > > > > /dev/mapper/VolGroup01-LogVol00 > > > > > > 223G 29G 182G 14% / > > > > > > /dev/sda1 99M 81M 13M 87% /boot > > > > > > tmpfs 757M 0 757M 0% /dev/shm > > > > > > [root@localhost kishore]# cat /etc/fstab > > > > > > /dev/VolGroup01/LogVol00 / ext3 defaults 1 1 > > > > > > LABEL=/boot /boot ext3 defaults 1 2 > > > > > > tmpfs /dev/shm tmpfs defaults 0 0 > > > > > > devpts /dev/pts devpts gid=5,mode=620 0 0 > > > > > > sysfs /sys sysfs defaults 0 0 > > > > > > proc /proc proc defaults 0 0 > > > > > > /dev/VolGroup01/LogVol01 swap swap defaults 0 0 > > > > > > [root@localhost kishore]# > > > > > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen > > <[1][2]pasik@iki.fi> wrote: > > > > > > On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore kumar > wrote: > > > > I am not sure. Can you please let me know how to check > > this? any > > > command > > > > ?? > > > > > > well simple "df -h" will show it. and also "cat /etc/fstab". > > > You can also check it from your grub configuration.. from the > > working > > > baremetal (non-Xen) entry. > > > > > > -- Pasi > > > > > > > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi Kärkkäinen > > > <[1][2][3]pasik@iki.fi> wrote: > > > > > > > > On Tue, Mar 16, 2010 at 03:22:50PM -0700, kishore > kumar > > wrote: > > > > > attached is the log captured in with the word > > document . > > > > > > > > > > > > > Scanning logical volumes > > > > Reading all physical volumes. This may take a > while... > > > > Activating logical volumes > > > > Volume group "VolGroup01" not found > > > > Trying to resume from /dev/VolGroup01/LogVol01 > > > > Unable to access resume device > (/dev/VolGroup01/LogVol01) > > > > Creating root device. > > > > Mounting root filesystem. > > > > mount: could not find filesystem '/dev/root' > > > > Setting up other filesystems. > > > > Setting up new root fs > > > > setuproot: moving /dev failed: No such file or > directory > > > > no fstab.sys, mounting internal defaults > > > > setuproot: error mounting /proc: No such file or > directory > > > > setuproot: error mounting /sys: No such file or > directory > > > > Switching to new root and running init. > > > > unmounting old /dev > > > > unmounting old /proc > > > > unmounting old /sys > > > > switchroot: mount failed: No such file or directory > > > > init used greatest stack depth: 4088 bytes left > > > > Kernel panic - not syncing: Attempted to kill init! > > > > > > > > So it seems it gets all the way to executing the > initrd > > image, > > > > which then fails to mount the root fs. > > > > > > > > Earlier in the log: > > > > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > > > > ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA, max > > UDMA/133 > > > > ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth > > 31/32), AA > > > > ata1.00: configured for UDMA/133 > > > > scsi 0:0:0:0: Direct-Access ATA Hitachi > HDT72102 > > STBO > > > PQ: 0 > > > > ANSI: 5 > > > > sd 0:0:0:0: Attached scsi generic sg0 type 0 > > > > sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: > (250 > > GB/232 > > > GiB) > > > > sd 0:0:0:0: [sda] Write Protect is off > > > > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > > > sd 0:0:0:0: [sda] Write cache: enabled, read cache: > > enabled, > > > doesn't > > > > support DPO or FUA > > > > sda: sda1 sda2 > > > > sd 0:0:0:0: [sda] Attached SCSI disk > > > > > > > > so /dev/sda was detected. Is your root lvm volume on > > /dev/sda ? > > > > Is /dev/VolGroup01/LogVol01 really your root fs? > > > > > > > > -- Pasi > > > > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi Kärkkäinen > > > > <[1][2][3][4]pasik@iki.fi> wrote: > > > > > > > > > > On Tue, Mar 16, 2010 at 02:56:06PM -0700, > kishore > > kumar > > > wrote: > > > > > > Please find the attached log file after > fixing > > the > > > dom 0 > > > > kernel cmd > > > > > line > > > > > > as below > > > > > > > > > > > > ro root=/dev/VolGroup01/LogVol00 > console=hvc0 > > > > earlyprintk=xen > > > > > nomodeset > > > > > > > > > > > > > > > > There's something wrong with the log, the dom0 > > kernel > > > parts are > > > > all on > > > > > one line.. > > > > > It's really difficult to read it. > > > > > > > > > > -- Pasi > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 2:29 PM, Pasi > > Kärkkäinen > > > > > <[1][2][3][4][5]pasik@iki.fi> wrote: > > > > > > > > > > > > On Tue, Mar 16, 2010 at 02:16:22PM > -0700, > > kishore > > > kumar > > > > wrote: > > > > > > > I did below steps. > > > > > > > > > > > > > > > > > > > > > I pulled DOM 0 kernel from > > > > > > > git clone > > > > > > > > > > > > > > > > > > > > git://[1][2][3][4][5][6] > git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > > linux-2.6-xen > > > > > > > > > > > > > > cd linux-2.6-xen > > > > > > > > > > > > > > make clean > > > > > > > > > > > > > > cp -a .config .config-old > > > > > > > > > > > > > > wget -O .config > > > > > > > > > > > > > > > > > > > > > > > > > > > [2][3][4][5][6][7] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > > > > > > > make oldconfig > > > > > > > > > > > > > > make bzImage > > > > > > > > > > > > > > make modules > > > > > > > > > > > > > > make modules_install > > > > > > > > > > > > > > cp -a .config /boot/config-2.6.32.9 > > > > > > > > > > > > > > cp -a System.map > > /boot/System.map-2.6.32.9 > > > > > > > > > > > > > > cp -a arch/x86/boot/bzImage > > > /boot/vmlinuz-2.6.32.9 > > > > > > > > > > > > > > and modified the grub.conf as below > > > > > > > > > > > > > > > > > > > > > Root(hd0,0) > > > > > > > > > > > > > > kernel /xen.gz console=vga,com1 > > > com1=115200,8n1 > > > > msi=1 > > > > > iommu=1 > > > > > > > > > > > > > > module /vmlinuz-2.6.32.9 ro > > > > root=/dev/VolGroup01/LogVo100 > > > > > rhgb > > > > > > quiet > > > > > > > > > > > > > > module /initrd-2.6.32.9.img > > > > > > > > > > > > > > > > > > > > > and rebooted the machine. Then It > > booted with > > > some > > > > xen > > > > > messages > > > > > > and > > > > > > > stopped. Those were the messages > > captured > > > from > > > > serial > > > > > console. > > > > > > > > > > > > > > Please let me know if I did > something > > wrong > > > here. > > > > > > > > > > > > > > > > > > > Please fix the kernel cmdline based on > my > > earlier > > > email, > > > > and > > > > > capture and > > > > > > post the > > > > > > serial console log again! > > > > > > > > > > > > -- Pasi > > > > > > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 1:20 PM, > Pasi > > > Kärkkäinen > > > > > > <[3][4][5][6][7][8]pasik@iki.fi> > wrote: > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at > 01:16:28PM > > -0700, > > > Jeremy > > > > > Fitzhardinge > > > > > > wrote: > > > > > > > > On 03/16/2010 12:48 PM, Pasi > > Kärkkäinen > > > wrote: > > > > > > > >> On Tue, Mar 16, 2010 at > 09:43:44PM > > +0200, > > > Pasi > > > > > Kärkkäinen > > > > > > wrote: > > > > > > > >> > > > > > > > >>> On Tue, Mar 16, 2010 at > > 10:32:17AM > > > -0700, > > > > kishore > > > > > kumar > > > > > > wrote: > > > > > > > >>> > > > > > > > >>>> Attached is the output > > captured > > > from > > > > serial > > > > > console. > > > > > > > >>>> > > > > > > > >>>> Machine does not boot > after > > > compiling xen > > > > 3.4.3 > > > > > with > > > > > > pv_ops dom > > > > > > > 0 kernel. > > > > > > > >>>> > > > > > > > >>>> Please let me know what > is > > going > > > wrong > > > > here. > > > > > > > >>>> > > > > > > > >>>> > > > > > > > >>> Ok this looks like a bug that > is > > already > > > being > > > > sorted > > > > > out on > > > > > > > xen-devel mailinglist. > > > > > > > >>> I added CC to xen-devel. > > > > > > > >>> > > > > > > > >>> > > > > > > > >> > > > > > > > > > > > > > > > > Those messages are not a > problem in > > > themselves, > > > > but the > > > > > related > > > > > > > problem > > > > > > > > is believed to be fixed in > current > > > > xen/stable-2.6.32.x. > > > > > It > > > > > > looks like > > > > > > > > the output stops there because > the > > Xen > > > console > > > > isn't set > > > > > up > > > > > > properly > > > > > > > for > > > > > > > > some reason. > > > > > > > > > > > > > > > > > > > > > > Yeah, remove "rhgb quiet" from > the > > options.. > > > the > > > > dom0 > > > > > kernel > > > > > > cmdline > > > > > > > should be like this: > > > > > > > ro root=/dev/VolGroup01/LogVol00 > > > console=hvc0 > > > > > earlyprintk=xen > > > > > > nomodeset > > > > > > > -- Pasi > > > > > > > > > > > > > > References > > > > > > > > > > > > > > Visible links > > > > > > > 1. > > > > > > > > > > > > > > [5][6][7][8][9] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > > 2. > > > > > > > > > > > > > > > > > > > > [6][7][8][9][10] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > 3. mailto:[7][8][9][10][11] > pasik@iki.fi > > > > > > > > > > > > References > > > > > > > > > > > > Visible links > > > > > > 1. mailto:[9][10][11][12]pasik@iki.fi > > > > > > 2. > > > > > > > > > > > > > > [10][11][12][13] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > 3. > > > > > > > > > > > > > > [11][12][13][14] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > 4. mailto:[12][13][14][15]pasik@iki.fi > > > > > > 5. > > > > > > > > > > > > > > [13][14][15][16] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > 6. > > > > > > > > > > > > > > [14][15][16][17] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > 7. mailto:[15][16][17][18]pasik@iki.fi > > > > > > Asserting Post complete GPIO!!! > > > > > > Transfer control to CSM 16-bit binary for > legacy > > boot > > > > > > __ __ _____ _ _ _____ > > _ _ > > > > > > \ \/ /___ _ __ |___ /| || | |___ / _ > __ > > ___| || | > > > _ > > > > __ _ > > > > > __ ___ > > > > > > \ // _ \ '_ \ |_ \| || |_ |_ \ __| > '__/ > > __| || > > > |_ __| > > > > '_ \| > > > > > '__/ _ \ > > > > > > / \ __/ | | | ___) |__ _| ___) |__| | > | > > (__|__ > > > _|__| > > > > |_) | | > > > > > | __/ > > > > > > /_/\_\___|_| |_| |____(_) |_|(_)____/ |_| > > \___| |_| > > > | > > > > .__/|_| > > > > > \___| > > > > > > > > > |_| > > > > > > (XEN) Xen version 3.4.3-rc4-pre > > (kishore@localdomain) > > > (gcc > > > > version > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar 15 > > 13:44:31 PDT > > > 2010 > > > > > > (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 > 2010 > > +0000 > > > > > 19924:6e72f8c3c017 > > > > > > (XEN) Command line: console=vga,com1 > > com1=115200,8n1 > > > msi=1 > > > > iommu=1 > > > > > > (XEN) Video information: > > > > > > (XEN) VGA is text mode 80x25, font 8x16 > > > > > > (XEN) VBE/DDC methods: none; EDID transfer > time: > > 0 > > > seconds > > > > > > (XEN) EDID info not retrieved because no DDC > > retrieval > > > method > > > > > detected > > > > > > (XEN) Disc information: > > > > > > (XEN) Found 1 MBR signatures > > > > > > (XEN) Found 1 EDD information structures > > > > > > (XEN) Xen-e820 RAM map: > > > > > > (XEN) 0000000000000000 - 000000000009d000 > > (usable) > > > > > > (XEN) 000000000009d000 - 00000000000a0000 > > (reserved) > > > > > > (XEN) 00000000000e0000 - 0000000000100000 > > (reserved) > > > > > > (XEN) 0000000000100000 - 000000006d597000 > > (usable) > > > > > > (XEN) 000000006d597000 - 000000006d686000 > > (reserved) > > > > > > (XEN) 000000006d686000 - 000000006f598000 > > (usable) > > > > > > (XEN) 000000006f598000 - 000000006f59a000 > > (reserved) > > > > > > (XEN) 000000006f59a000 - 000000006f5af000 > (ACPI > > NVS) > > > > > > (XEN) 000000006f5af000 - 000000006f5d9000 > > (reserved) > > > > > > (XEN) 000000006f5d9000 - 000000006f5f9000 > (ACPI > > data) > > > > > > (XEN) 000000006f5f9000 - 000000006f6df000 > (ACPI > > NVS) > > > > > > (XEN) 000000006f6df000 - 000000006f700000 > (ACPI > > data) > > > > > > (XEN) 000000006f700000 - 0000000080000000 > > (reserved) > > > > > > (XEN) 00000000a0000000 - 00000000b0000000 > > (reserved) > > > > > > (XEN) 00000000fc000000 - 00000000fd000000 > > (reserved) > > > > > > (XEN) 00000000fed1c000 - 00000000fed20000 > > (reserved) > > > > > > (XEN) 00000000ffc00000 - 0000000100000000 > > (reserved) > > > > > > (XEN) System RAM: 1780MB (1823000kB) > > > > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL ) > > > > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL > THRLY > > > 0 > > > > > 1000013) > > > > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL > THRLY > > > 0 > > > > MSFT > > > > > 100000D) > > > > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL > THRLY > > > 3 > > > > MSFT > > > > > 100000D) > > > > > > (XEN) ACPI: FACS 6F5F9000, 0040 > > > > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL > THRLY > > > 0 > > > > MSFT > > > > > 100000D) > > > > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL > THRLY > > > 1 > > > > MSFT > > > > > 100000D) > > > > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL > THRLY > > > 1 > > > > MSFT > > > > > 100000D) > > > > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL > THRLY > > > 1 > > > > MSFT > > > > > 100000D) > > > > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL > THRLY > > > 0 > > > > MSFT > > > > > 100000D) > > > > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 INTEL > SSDT > > PM > > > 4000 > > > > INTL > > > > > 20061109) > > > > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL > THRLY > > > 1 > > > > MSFT > > > > > 100000D) > > > > > > (XEN) Domain heap initialised > > > > > > (XEN) Processor #0 6:12 APIC version 21 > > > > > > (XEN) Processor #2 6:12 APIC version 21 > > > > > > (XEN) Processor #4 6:12 APIC version 21 > > > > > > (XEN) Processor #16 6:12 APIC version 21 > > > > > > (XEN) Processor #18 6:12 APIC version 21 > > > > > > (XEN) Processor #20 6:12 APIC version 21 > > > > > > (XEN) Processor #1 6:12 APIC version 21 > > > > > > (XEN) Processor #3 6:12 APIC version 21 > > > > > > (XEN) Processor #5 6:12 APIC version 21 > > > > > > (XEN) Processor #17 6:12 APIC version 21 > > > > > > (XEN) Processor #19 6:12 APIC version 21 > > > > > > (XEN) Processor #21 6:12 APIC version 21 > > > > > > (XEN) IOAPIC[0]: apic_id 8, version 32, > address > > > 0xfec00000, GSI > > > > 0-23 > > > > > > (XEN) IOAPIC[1]: apic_id 9, version 32, > address > > > 0xfec90000, GSI > > > > 24-47 > > > > > > (XEN) Enabling APIC mode: Phys. Using 2 I/O > > APICs > > > > > > (XEN) Intel VT-d DMAR tables have been > parsed. > > > > > > (XEN) Using scheduler: SMP Credit Scheduler > > (credit) > > > > > > (XEN) Detected 3200.207 MHz processor. > > > > > > (XEN) VMX: Supported advanced features: > > > > > > (XEN) - APIC MMIO access virtualisation > > > > > > (XEN) - APIC TPR shadow > > > > > > (XEN) - Extended Page Tables (EPT) > > > > > > (XEN) - Virtual-Processor Identifiers (VPID) > > > > > > (XEN) - Virtual NMI > > > > > > (XEN) - MSR direct-access bitmap > > > > > > (XEN) VMX: EPT is available. > > > > > > (XEN) VMX: VPID is available. > > > > > > (XEN) HVM: VMX enabled > > > > > > (XEN) HVM: Hardware Assisted Paging detected. > > > > > > (XEN) CPU0: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 1/2 eip 88000 > > > > > > (XEN) CPU1: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 2/4 eip 88000 > > > > > > (XEN) CPU2: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 3/16 eip 88000 > > > > > > (XEN) CPU3: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 4/18 eip 88000 > > > > > > (XEN) CPU4: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 5/20 eip 88000 > > > > > > (XEN) CPU5: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 6/1 eip 88000 > > > > > > (XEN) CPU6: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 7/3 eip 88000 > > > > > > (XEN) CPU7: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 8/5 eip 88000 > > > > > > (XEN) CPU8: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 9/17 eip 88000 > > > > > > (XEN) CPU9: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 10/19 eip 88000 > > > > > > (XEN) CPU10: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 11/21 eip 88000 > > > > > > (XEN) CPU11: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Total of 12 processors activated. > > > > > > (XEN) ENABLING IO-APIC IRQs > > > > > > (XEN) -> Using new ACK method > > > > > > (XEN) checking TSC synchronization across 12 > > CPUs: > > > passed. > > > > > > (XEN) Platform timer is 14.318MHz HPET > > > > > > ?(XEN) Brought up 12 CPUs > > > > > > (XEN) Intel VT-d Snoop Control supported. > > > > > > (XEN) Intel VT-d DMA Passthrough not > supported. > > > > > > (XEN) Intel VT-d Queued Invalidation > supported. > > > > > > (XEN) Intel VT-d Interrupt Remapping > supported. > > > > > > (XEN) I/O virtualisation enabled > > > > > > (XEN) I/O virtualisation for PV guests > disabled > > > > > > (XEN) xenoprof: Initialization failed. Intel > > processor > > > model 44 > > > > for P6 > > > > > class family is not supported > > > > > > (XEN) *** LOADING DOMAIN 0 *** > > > > > > (XEN) Xen kernel: 64-bit, lsb, compat32 > > > > > > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr > > 0x1000000 -> > > > > 0x26bb000 > > > > > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > > > > > (XEN) Dom0 alloc.: > > 0000000064000000->0000000068000000 > > > > (404490 pages > > > > > to be allocated) > > > > > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > > > > > (XEN) Loaded kernel: > > ffffffff81000000->ffffffff826bb000 > > > > > > (XEN) Init. ramdisk: > > ffffffff826bb000->ffffffff82d0d800 > > > > > > (XEN) Phys-Mach map: > > ffffffff82d0e000->ffffffff83044050 > > > > > > (XEN) Start info: > > ffffffff83045000->ffffffff830454b4 > > > > > > (XEN) Page tables: > > ffffffff83046000->ffffffff83063000 > > > > > > (XEN) Boot stack: > > ffffffff83063000->ffffffff83064000 > > > > > > (XEN) TOTAL: > > ffffffff80000000->ffffffff83400000 > > > > > > (XEN) ENTRY ADDRESS: ffffffff819c1200 > > > > > > (XEN) Dom0 has maximum 12 VCPUs > > > > > > (XEN) Scrubbing Free RAM: .done. > > > > > > (XEN) Xen trace buffers: disabled > > > > > > (XEN) Std. Loglevel: Errors and warnings > > > > > > (XEN) Guest Loglevel: Nothing (Rate-limited: > > Errors and > > > > warnings) > > > > > > (XEN) Xen is relinquishing VGA console. > > > > > > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' > > three > > > times to > > > > switch > > > > > input to Xen) > > > > > > (XEN) Freed 128kB init memory. > > > > > > mapping kernel into physical memory > > > > > > Xen: setup ISA identity maps > > > > > > about to get started... > > > > > > Initializing cgroup subsys cpuset > > > > > > Initializing cgroup subsys cpu > > > > > > Linux version 2.6.32.9 > > (kishore@localhost.localdomain) > > > (gcc > > > > version > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon > Mar > > 15 > > > 15:16:28 PDT > > > > 2010 > > > > > > Command line: ro > root=/dev/VolGroup01/LogVol00 > > > console=hvc0 > > > > > earlyprintk=xen nomodeset > > > > > > KERNEL supported cpus: > > > > > > Intel GenuineIntel > > > > > > AMD AuthenticAMD > > > > > > Centaur CentaurHauls > > > > > > BIOS-provided physical RAM map: > > > > > > Xen: 0000000000000000 - 000000000009d000 > > (usable) > > > > > > Xen: 000000000009d000 - 0000000000100000 > > (reserved) > > > > > > Xen: 0000000000100000 - 0000000066c0a000 > > (usable) > > > > > > Xen: 000000006d597000 - 000000006d686000 > > (reserved) > > > > > > Xen: 000000006f598000 - 000000006f59a000 > > (reserved) > > > > > > Xen: 000000006f59a000 - 000000006f5af000 > (ACPI > > NVS) > > > > > > Xen: 000000006f5af000 - 000000006f5d9000 > > (reserved) > > > > > > Xen: 000000006f5d9000 - 000000006f5f9000 > (ACPI > > data) > > > > > > Xen: 000000006f5f9000 - 000000006f6df000 > (ACPI > > NVS) > > > > > > Xen: 000000006f6df000 - 000000006f700000 > (ACPI > > data) > > > > > > Xen: 000000006f700000 - 0000000080000000 > > (reserved) > > > > > > Xen: 00000000a0000000 - 00000000b0000000 > > (reserved) > > > > > > Xen: 00000000fc000000 - 00000000fd000000 > > (reserved) > > > > > > Xen: 00000000fed1c000 - 00000000fed20000 > > (reserved) > > > > > > Xen: 00000000ffc00000 - 0000000100000000 > > (reserved) > > > > > > bootconsole [xenboot0] enabled > > > > > > DMI 2.4 present. > > > > > > last_pfn = 0x66c0a max_arch_pfn = 0x400000000 > > > > > > init_memory_mapping: > > 0000000000000000-0000000066c0a000 > > > > > > RAMDISK: 026bb000 - 02d0d800 > > > > > > ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL > ) > > > > > > ACPI: XSDT 000000006f6fe120 00064 (v01 INTEL > > THRLY > > > 00000000 > > > > > 01000013) > > > > > > ACPI: FACP 000000006f6fd000 000F4 (v04 INTEL > > THRLY > > > 00000000 > > > > MSFT > > > > > 0100000D) > > > > > > ACPI: DSDT 000000006f6f5000 074F1 (v02 INTEL > > THRLY > > > 00000003 > > > > MSFT > > > > > 0100000D) > > > > > > ACPI: FACS 000000006f5f9000 00040 > > > > > > ACPI: APIC 000000006f6f4000 001CC (v02 INTEL > > THRLY > > > 00000000 > > > > MSFT > > > > > 0100000D) > > > > > > ACPI: MCFG 000000006f6f3000 0003C (v01 INTEL > > THRLY > > > 00000001 > > > > MSFT > > > > > 0100000D) > > > > > > ACPI: HPET 000000006f6f2000 00038 (v01 INTEL > > THRLY > > > 00000001 > > > > MSFT > > > > > 0100000D) > > > > > > ACPI: SLIT 000000006f6f1000 00030 (v01 INTEL > > THRLY > > > 00000001 > > > > MSFT > > > > > 0100000D) > > > > > > ACPI: WDDT 000000006f6f0000 00040 (v01 INTEL > > THRLY > > > 00000000 > > > > MSFT > > > > > 0100000D) > > > > > > ACPI: SSDT 000000006f5d9000 1FDDC (v01 INTEL > > SSDT PM > > > 00004000 > > > > INTL > > > > > 20061109) > > > > > > ACPI: 000000006f6ee000 001D0 (v01 INTEL > > THRLY > > > 00000001 > > > > MSFT > > > > > 0100000D) > > > > > > No NUMA configuration found > > > > > > Faking a node at > > 0000000000000000-0000000066c0a000 > > > > > > Bootmem setup node 0 > > 0000000000000000-0000000066c0a000 > > > > > > NODE_DATA [0000000000008000 - > 000000000001ffff] > > > > > > bootmap [0000000000020000 - > 000000000002cd87] > > pages d > > > > > > (9 early reservations) ==> bootmem > [0000000000 - > > > 0066c0a000] > > > > > > #0 [0000000000 - 0000001000] BIOS data > page > > ==> > > > [0000000000 > > > > - > > > > > 0000001000] > > > > > > #1 [0003046000 - 0003063000] XEN > PAGETABLES > > ==> > > > [0003046000 > > > > - > > > > > 0003063000] > > > > > > #2 [0000006000 - 0000008000] > TRAMPOLINE > > ==> > > > [0000006000 > > > > - > > > > > 0000008000] > > > > > > #3 [0001000000 - 000269ae98] TEXT DATA > BSS > > ==> > > > [0001000000 > > > > - > > > > > 000269ae98] > > > > > > #4 [00026bb000 - 0002d0d800] > RAMDISK > > ==> > > > [00026bb000 > > > > - > > > > > 0002d0d800] > > > > > > #5 [0002d0e000 - 0003046000] XEN START > INFO > > ==> > > > [0002d0e000 > > > > - > > > > > 0003046000] > > > > > > #6 [000269b000 - 000269b011] > BRK > > ==> > > > [000269b000 > > > > - > > > > > 000269b011] > > > > > > #7 [0000100000 - 000041a000] > PGTABLE > > ==> > > > [0000100000 > > > > - > > > > > 000041a000] > > > > > > #8 [0000001000 - 0000001030] ACPI > SLIT > > ==> > > > [0000001000 > > > > - > > > > > 0000001030] > > > > > > found SMP MP-table at [ffff8800000fd750] > fd750 > > > > > > Zone PFN ranges: > > > > > > DMA 0x00000000 -> 0x00001000 > > > > > > DMA32 0x00001000 -> 0x00100000 > > > > > > Normal 0x00100000 -> 0x00100000 > > > > > > Movable zone start PFN for each node > > > > > > early_node_map[2] active PFN ranges > > > > > > 0: 0x00000000 -> 0x0000009d > > > > > > 0: 0x00000100 -> 0x00066c0a > > > > > > ACPI: PM-Timer IO Port: 0x408 > > > > > > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x00] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x01] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x02] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x03] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x04] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x05] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x06] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x07] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x08] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x09] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x10] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x11] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x12] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x13] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x14] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x15] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x16] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x17] high level > > lint[0x1]) > > > > > > ACPI: IOAPIC (id[0x08] address[0xfec00000] > > gsi_base[0]) > > > > > > IOAPIC[0]: apic_id 8, version 0, address > > 0xfec00000, GSI > > > 0-0 > > > > > > ACPI: IOAPIC (id[0x09] address[0xfec90000] > > gsi_base[24]) > > > > > > IOAPIC[1]: apic_id 9, version 0, address > > 0xfec90000, GSI > > > 24-24 > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq > 2 > > dfl dfl) > > > > > > ERROR: Unable to locate IOAPIC for GSI 2 > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq > 9 > > high > > > level) > > > > > > ERROR: Unable to locate IOAPIC for GSI 9 > > > > > > Using ACPI (MADT) for SMP configuration > > information > > > > > > ACPI: HPET id: 0x8086a401 base: 0xfed00000 > > > > > > SMP: Allowing 12 CPUs, 0 hotplug CPUs > > > > > > PM: Registered nosave memory: > 000000000009d000 - > > > > 0000000000100000 > > > > > > Allocating PCI resources starting at b0000000 > > (gap: > > > > b0000000:4c000000) > > > > > > Booting paravirtualized kernel on Xen > > > > > > Xen version: 3.4.3-rc4-pre (preserve-AD) > (dom0) > > > > > > NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 > > > nr_node_ids:1 > > > > > > PERCPU: Embedded 478 pages/cpu > @ffff880005ebc000 > > > s1928024 r8192 > > > > d21672 > > > > > u1957888 > > > > > > pcpu-alloc: s1928024 r8192 d21672 u1957888 > > > alloc=478*4096 > > > > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] > 04 > > [0] 05 > > > [0] 06 > > > > [0] 07 > > > > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 > > > > > > Xen: using vcpu_info placement > > > > > > Built 1 zonelists in Node order, mobility > > grouping on. > > > Total > > > > pages: > > > > > 409291 > > > > > > Policy zone: DMA32 > > > > > > Kernel command line: ro > > root=/dev/VolGroup01/LogVol00 > > > > console=hvc0 > > > > > earlyprintk=xen nomodeset > > > > > > PID hash table entries: 4096 (order: 3, 32768 > > bytes) > > > > > > Initializing CPU#0 > > > > > > DMA: Placing 64MB software IO TLB between > > > ffff880007525000 - > > > > > ffff88000b525000 > > > > > > DMA: software IO TLB at phys 0x7525000 - > > 0xb525000 > > > > > > xen_swiotlb_fixup: buf=ffff880007525000 > > size=67108864 > > > > > > xen_swiotlb_fixup: buf=ffff88000b585000 > > size=32768 > > > > > > Memory: 1514268k/1683496k available (4654k > kernel > > code, > > > 396k > > > > absent, > > > > > 168832k reserved, 3443k data, 3396k init) > > > > > > SLUB: Genslabs=14, HWalign=64, Order=0-3, > > MinObjects=0, > > > > CPUs=12, > > > > > Nodes=1 > > > > > > Hierarchical RCU implementation. > > > > > > NR_IRQS:4352 nr_irqs:3072 > > > > > > Already setup the GSI :0 > > > > > > Already setup the GSI :1 > > > > > > Already setup the GSI :2 > > > > > > Already setup the GSI :3 > > > > > > Already setup the GSI :4 > > > > > > Already setup the GSI :5 > > > > > > Already setup the GSI :6 > > > > > > Already setup the GSI :7 > > > > > > Already setup the GSI :8 > > > > > > Already setup the GSI :9 > > > > > > Already setup the GSI :10 > > > > > > Already setup the GSI :11 > > > > > > Already setup the GSI :12 > > > > > > Already setup the GSI :13 > > > > > > Already setup the GSI :14 > > > > > > Already setup the GSI :15 > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq > 2 > > dfl dfl) > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq > 9 > > high > > > level) > > > > > > xen: sci override: source_irq=9 global_irq=9 > > trigger=c > > > > polarity=1 > > > > > > xen_allocate_pirq: returning irq 9 for gsi 9 > > > > > > Already setup the GSI :9 > > > > > > xen: acpi sci 9 > > > > > > Console: colour VGA+ 80x25 > > > > > > console [hvc0] enabled, bootconsole disabled > > console > > > [hvc0] > > > > enabled, > > > > > bootconsole disabled > > > > > > Lock dependency validator: Copyright (c) 2006 > Red > > Hat, > > > Inc., > > > > Ingo > > > > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... > > MAX_LOCK_DEPTH: > > > > 48 > > > > > ... MAX_LOCKDEP_KEYS: 8191 ... > > CLASSHASH_SIZE: > > > > 4096 ... > > > > > MAX_LOCKDEP_ENTRIES: 16384 ... > > MAX_LOCKDEP_CHAINS: > > > 32768 > > > > ... > > > > > CHAINHASH_SIZE: 16384 memory used by > lock > > > dependency > > > > info: > > > > > 6367 kB per task-struct memory footprint: 2688 > > bytes > > > allocated > > > > 17039360 > > > > > bytes of page_cgroup please try > > 'cgroup_disable=memory' > > > option if > > > > you > > > > > don't want memory cgroups installing Xen timer > for > > CPU 0 > > > Detected > > > > > 3200.206 MHz processor. Calibrating delay loop > > (skipped), > > > value > > > > > calculated using timer frequency.. 6400.41 > BogoMIPS > > > (lpj=3200206) > > > > > Security Framework initialized SELinux: > > Initializing. > > > Dentry > > > > cache hash > > > > > table entries: 262144 (order: 9, 2097152 bytes) > > > Inode-cache hash > > > > table > > > > > entries: 131072 (order: 8, 1048576 bytes) > > Mount-cache hash > > > table > > > > > entries: 256 Initializing cgroup subsys ns > > Initializing > > > cgroup > > > > subsys > > > > > cpuacct Initializing cgroup subsys memory > > Initializing > > > cgroup > > > > subsys > > > > > devices Initializing cgroup subsys freezer > > Initializing > > > cgroup > > > > subsys > > > > > net_cls CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: > > L2 > > > cache: 256K > > > > CPU: > > > > > L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU: > > Unsupported > > > number of > > > > siblings > > > > > 32 Performance Events: unsupported p6 CPU model > 44 > > no PMU > > > driver, > > > > > software events only. lockdep: fixing up > > alternatives. SMP > > > > alternatives: > > > > > switching to UP code ACPI: Core revision > 20090903 > > ftrace: > > > > converting > > > > > mcount calls to 0f 1f 44 00 00 ftrace: > allocating > > 27971 > > > entries > > > > in 110 > > > > > pages installing Xen timer for CPU 1 lockdep: > > fixing up > > > > alternatives. > > > > > SMP alternatives: switching to SMP code > > Initializing CPU#1 > > > CPU: > > > > L1 I > > > > > cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K > > CPU: L3 > > > cache: > > > > 12288K > > > > > CPU 1/0x0 -> Node 0 CPU: Unsupported number of > > siblings 32 > > > > installing > > > > > Xen timer for CPU 2 Initializing CPU#2 CPU: L1 > I > > cache: > > > 32K, L1 D > > > > cache: > > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K > CPU > > 2/0x0 -> > > > Node 0 > > > > CPU: > > > > > Unsupported number of siblings 32 installing > Xen > > timer for > > > CPU 3 > > > > > Initializing CPU#3 CPU: L1 I cache: 32K, L1 D > > cache: 32K > > > CPU: L2 > > > > cache: > > > > > 256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node 0 > CPU: > > > Unsupported > > > > number > > > > > of siblings 32 installing Xen timer for CPU 4 > > Initializing > > > CPU#4 > > > > CPU: L1 > > > > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: > 256K > > CPU: L3 > > > cache: > > > > 12288K > > > > > CPU 4/0x0 -> Node 0 CPU: Unsupported number of > > siblings 32 > > > > installing > > > > > Xen timer for CPU 5 Initializing CPU#5 CPU: L1 > I > > cache: > > > 32K, L1 D > > > > cache: > > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K > CPU > > 5/0x0 -> > > > Node 0 > > > > CPU: > > > > > Unsupported number of siblings 32 installing > Xen > > timer for > > > CPU 6 > > > > > Initializing CPU#6 CPU: L1 I cache: 32K, L1 D > > cache: 32K > > > CPU: L2 > > > > cache: > > > > > 256K CPU: L3 cache: 12288K CPU 6/0x0 -> Node 0 > CPU: > > > Unsupported > > > > number > > > > > of siblings 32 installing Xen timer for CPU 7 > > Initializing > > > CPU#7 > > > > CPU: L1 > > > > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: > 256K > > CPU: L3 > > > cache: > > > > 12288K > > > > > CPU 7/0x0 -> Node 0 CPU: Unsupported number of > > siblings 32 > > > > installing > > > > > Xen timer for CPU 8 Initializing CPU#8 CPU: L1 > I > > cache: > > > 32K, L1 D > > > > cache: > > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K > CPU > > 8/0x0 -> > > > Node 0 > > > > CPU: > > > > > Unsupported number of siblings 32 installing > Xen > > timer for > > > CPU 9 > > > > > Initializing CPU#9 CPU: L1 I cache: 32K, L1 D > > cache: 32K > > > CPU: L2 > > > > cache: > > > > > 256K CPU: L3 cache: 12288K CPU 9/0x0 -> Node 0 > CPU: > > > Unsupported > > > > number > > > > > of siblings 32 installing Xen timer for CPU 10 > > > Initializing > > > > CPU#10 CPU: > > > > > L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: > > 256K CPU: > > > L3 > > > > cache: > > > > > 12288K CPU 10/0x0 -> Node 0 CPU: Unsupported > number > > of > > > siblings > > > > 32 > > > > > installing Xen timer for CPU 11 Initializing > CPU#11 > > CPU: > > > L1 I > > > > cache: > > > > > 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: > L3 > > cache: > > > 12288K > > > > CPU > > > > > 11/0x0 -> Node 0 CPU: Unsupported number of > > siblings 32 > > > Brought > > > > up 12 > > > > > CPUs Grant table initialized regulator: core > > version 0.5 > > > Time: > > > > 14:45:00 > > > > > Date: 03/16/10 NET: Registered protocol family > 16 > > > > xenbus_probe_init ok > > > > > ACPI FADT declares the system doesn't support > PCIe > > ASPM, > > > so > > > > disable it > > > > > ACPI: bus type pci registered PCI: MCFG > > configuration 0: > > > base > > > > a0000000 > > > > > segment 0 buses 0 - 255 PCI: MCFG area at > a0000000 > > > reserved in > > > > E820 PCI: > > > > > Using MMCONFIG at a0000000 - afffffff PCI: > Using > > > configuration > > > > type 1 > > > > > for base access bio: create slab <bio-0> at 0 > ACPI > > Error: > > > Field > > > > [CPB3] > > > > > at 96 exceeds Buffer [NULL] size 64 (bits) > > > > (20090903/dsopcode-596) ACPI > > > > > Error (psparse-0537): Method parse/execution > failed > > > [\_SB_._OSC] > > > > (Node > > > > > ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI: > > Interpreter > > > enabled > > > > ACPI: > > > > > (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC > for > > interrupt > > > > routing ACPI > > > > > Warning: Incorrect checksum in table [ ] - > 97, > > should > > > be DB > > > > > (20090903/tbutils-314) ACPI: No dock devices > found. > > ACPI: > > > PCI > > > > Root > > > > > Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# > > supported > > > from D0 > > > > D3hot > > > > > D3cold pci 0000:00:01.0: PME# disabled pci > > 0000:00:02.0: > > > PME# > > > > supported > > > > > from D0 D3hot D3cold pci 0000:00:02.0: PME# > > disabled pci > > > > 0000:00:03.0: > > > > > PME# supported from D0 D3hot D3cold pci > > 0000:00:03.0: PME# > > > > disabled pci > > > > > 0000:00:04.0: PME# supported from D0 D3hot > D3cold > > pci > > > > 0000:00:04.0: PME# > > > > > disabled pci 0000:00:05.0: PME# supported from > D0 > > D3hot > > > D3cold > > > > pci > > > > > 0000:00:05.0: PME# disabled pci 0000:00:06.0: > PME# > > > supported from > > > > D0 > > > > > D3hot D3cold pci 0000:00:06.0: PME# disabled > pci > > > 0000:00:07.0: > > > > PME# > > > > > supported from D0 D3hot D3cold pci > 0000:00:07.0: > > PME# > > > disabled > > > > pci > > > > > 0000:00:08.0: PME# supported from D0 D3hot > D3cold > > pci > > > > 0000:00:08.0: PME# > > > > > disabled pci 0000:00:09.0: PME# supported from > D0 > > D3hot > > > D3cold > > > > pci > > > > > 0000:00:09.0: PME# disabled pci 0000:00:0a.0: > PME# > > > supported from > > > > D0 > > > > > D3hot D3cold pci 0000:00:0a.0: PME# disabled > pci > > > 0000:00:13.0: > > > > PME# > > > > > supported from D0 D3hot D3cold pci > 0000:00:13.0: > > PME# > > > disabled > > > > pci > > > > > 0000:00:1a.7: PME# supported from D0 D3hot > D3cold > > pci > > > > 0000:00:1a.7: PME# > > > > > disabled pci 0000:00:1c.0: PME# supported from > D0 > > D3hot > > > D3cold > > > > pci > > > > > 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: > PME# > > > supported from > > > > D0 > > > > > D3hot D3cold pci 0000:00:1c.4: PME# disabled > pci > > > 0000:00:1c.5: > > > > PME# > > > > > supported from D0 D3hot D3cold pci > 0000:00:1c.5: > > PME# > > > disabled > > > > pci > > > > > 0000:00:1d.7: PME# supported from D0 D3hot > D3cold > > pci > > > > 0000:00:1d.7: PME# > > > > > disabled pci 0000:00:1f.0: quirk: region > 0400-047f > > claimed > > > by > > > > ICH6 > > > > > ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region > > 0500-053f > > > claimed > > > > by ICH6 > > > > > GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO > decode 1 > > PIO at > > > 0680 > > > > (mask > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO > decode > > 2 PIO > > > at 0ca0 > > > > (mask > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO > decode > > 3 PIO > > > at 0600 > > > > (mask > > > > > 001f) pci 0000:00:1f.2: PME# supported from > D3hot > > pci > > > > 0000:00:1f.2: PME# > > > > > disabled pci 0000:01:00.0: PME# supported from > D0 > > D3hot > > > D3cold > > > > pci > > > > > 0000:01:00.0: PME# disabled pci 0000:01:00.1: > PME# > > > supported from > > > > D0 > > > > > D3hot D3cold pci 0000:01:00.1: PME# disabled > pci > > > 0000:0c:00.0: > > > > disabling > > > > > ASPM on pre-1.1 PCIe device. You can enable it > > with > > > > 'pcie_aspm=force' > > > > > pci 0000:00:1e.0: transparent bridge ACPI: PCI > Root > > Bridge > > > [PCI1] > > > > > (0000:fe) ACPI: PCI Root Bridge [PCI2] > (0000:ff) > > ACPI: PCI > > > > Interrupt > > > > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > > ACPI: PCI > > > > Interrupt Link > > > > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: > PCI > > > Interrupt > > > > Link > > > > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: > PCI > > > Interrupt > > > > Link > > > > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: > PCI > > > Interrupt > > > > Link > > > > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, > > disabled. > > > ACPI: PCI > > > > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 > 12 > > 14 15) > > > ACPI: > > > > PCI > > > > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 > 12 14 > > 15) > > > *0, > > > > disabled. > > > > > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 > 9 > > *10 11 > > > 12 14 > > > > 15) > > > > > xenbus_probe_backend_init bus registered ok > > > > xenbus_probe_frontend_init > > > > > bus registered ok xen_balloon: Initialising > balloon > > driver > > > with > > > > page > > > > > order 0. vgaarb: device added: > > > > > > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none > > > vgaarb: > > > > loaded > > > > > SCSI subsystem initialized usbcore: registered > new > > > interface > > > > driver > > > > > usbfs usbcore: registered new interface driver > hub > > > usbcore: > > > > registered > > > > > new device driver usb PCI: Using ACPI for IRQ > > routing > > > NetLabel: > > > > > Initializing NetLabel: domain hash size = 128 > > NetLabel: > > > > protocols = > > > > > UNLABELED CIPSOv4 NetLabel: unlabeled traffic > > allowed by > > > default > > > > > Switching to clocksource xen kstop/0 used > greatest > > stack > > > depth: > > > > 6568 > > > > > bytes left kstop/1 used greatest stack depth: > 6536 > > bytes > > > left > > > > pnp: PnP > > > > > ACPI init ACPI: bus type pnp registered > > xen_allocate_pirq: > > > > returning irq > > > > > 8 for gsi 8 Already setup the GSI :8 > > xen_allocate_pirq: > > > returning > > > > irq 13 > > > > > for gsi 13 Already setup the GSI :13 pnp: PnP > ACPI: > > found > > > 13 > > > > devices > > > > > ACPI: ACPI bus type pnp unregistered system > 00:07: > > ioport > > > range > > > > > 0x500-0x53f has been reserved system 00:07: > ioport > > range > > > > 0x400-0x47f has > > > > > been reserved system 00:07: ioport range > > 0x800-0x81f has > > > been > > > > reserved > > > > > system 00:07: ioport range 0x2f8-0x2ff has been > > reserved > > > system > > > > 00:07: > > > > > iomem range 0xfed1c000-0xfed8bffe could not be > > reserved > > > system > > > > 00:07: > > > > > iomem range 0xff000000-0xffffffff could not be > > reserved > > > system > > > > 00:07: > > > > > iomem range 0xfee00000-0xfeefffff has been > reserved > > system > > > 00:07: > > > > iomem > > > > > range 0xfe900000-0xfe90001f has been reserved > > system > > > 00:07: iomem > > > > range > > > > > 0xfea00000-0xfea0001f has been reserved system > > 00:07: > > > iomem range > > > > > 0xfed1b000-0xfed1bfff has been reserved pci > > 0000:0c:00.0: > > > BAR 6: > > > > no > > > > > parent found for of device > [0xffff0000-0xffffffff] > > pci > > > > 0000:00:01.0: PCI > > > > > bridge, secondary bus 0000:01 pci 0000:00:01.0: > > IO > > > window: > > > > > 0x1000-0x1fff pci 0000:00:01.0: MEM window: > > > > 0xb1900000-0xb19fffff pci > > > > > 0000:00:01.0: PREFETCH window: disabled pci > > > 0000:00:02.0: PCI > > > > bridge, > > > > > secondary bus 0000:02 pci 0000:00:02.0: IO > > window: > > > disabled pci > > > > > 0000:00:02.0: MEM window: disabled pci > > 0000:00:02.0: > > > PREFETCH > > > > > window: disabled pci 0000:00:03.0: PCI bridge, > > secondary > > > bus > > > > 0000:03 pci > > > > > 0000:00:03.0: IO window: disabled pci > > 0000:00:03.0: > > > MEM > > > > window: > > > > > disabled pci 0000:00:03.0: PREFETCH window: > > disabled pci > > > > 0000:00:04.0: > > > > > PCI bridge, secondary bus 0000:04 pci > 0000:00:04.0: > > IO > > > window: > > > > > disabled pci 0000:00:04.0: MEM window: > disabled > > pci > > > > 0000:00:04.0: > > > > > PREFETCH window: disabled pci 0000:00:05.0: PCI > > bridge, > > > secondary > > > > bus > > > > > 0000:05 pci 0000:00:05.0: IO window: disabled > pci > > > 0000:00:05.0: > > > > MEM > > > > > window: disabled pci 0000:00:05.0: PREFETCH > > window: > > > disabled > > > > pci > > > > > 0000:00:06.0: PCI bridge, secondary bus 0000:06 > pci > > > 0000:00:06.0: > > > > IO > > > > > window: disabled pci 0000:00:06.0: MEM > window: > > disabled > > > pci > > > > > 0000:00:06.0: PREFETCH window: disabled pci > > > 0000:00:07.0: PCI > > > > bridge, > > > > > secondary bus 0000:07 pci 0000:00:07.0: IO > > window: > > > disabled pci > > > > > 0000:00:07.0: MEM window: disabled pci > > 0000:00:07.0: > > > PREFETCH > > > > > window: disabled pci 0000:00:08.0: PCI bridge, > > secondary > > > bus > > > > 0000:08 pci > > > > > 0000:00:08.0: IO window: disabled pci > > 0000:00:08.0: > > > MEM > > > > window: > > > > > disabled pci 0000:00:08.0: PREFETCH window: > > disabled pci > > > > 0000:00:09.0: > > > > > PCI bridge, secondary bus 0000:09 pci > 0000:00:09.0: > > IO > > > window: > > > > > 0x3000-0x3fff pci 0000:00:09.0: MEM window: > > > > 0xb1b00000-0xb1cfffff pci > > > > > 0000:00:09.0: PREFETCH window: > > > > 0x000000b1d00000-0x000000b1efffff pci > > > > > 0000:00:0a.0: PCI bridge, secondary bus 0000:0a > pci > > > 0000:00:0a.0: > > > > IO > > > > > window: disabled pci 0000:00:0a.0: MEM > window: > > disabled > > > pci > > > > > 0000:00:0a.0: PREFETCH window: disabled pci > > > 0000:00:1c.0: PCI > > > > bridge, > > > > > secondary bus 0000:0b pci 0000:00:1c.0: IO > > window: > > > disabled pci > > > > > 0000:00:1c.0: MEM window: disabled pci > > 0000:00:1c.0: > > > PREFETCH > > > > > window: disabled pci 0000:00:1c.4: PCI bridge, > > secondary > > > bus > > > > 0000:0c pci > > > > > 0000:00:1c.4: IO window: disabled pci > > 0000:00:1c.4: > > > MEM > > > > window: > > > > > 0xb1000000-0xb18fffff pci 0000:00:1c.4: > PREFETCH > > window: > > > > > 0x000000b0000000-0x000000b0ffffff pci > 0000:00:1c.5: > > PCI > > > bridge, > > > > > secondary bus 0000:0d pci 0000:00:1c.5: IO > > window: > > > disabled pci > > > > > 0000:00:1c.5: MEM window: disabled pci > > 0000:00:1c.5: > > > PREFETCH > > > > > window: disabled pci 0000:00:1e.0: PCI bridge, > > secondary > > > bus > > > > 0000:0e pci > > > > > 0000:00:1e.0: IO window: disabled pci > > 0000:00:1e.0: > > > MEM > > > > window: > > > > > disabled pci 0000:00:1e.0: PREFETCH window: > > disabled pci > > > > 0000:00:01.0: > > > > > PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci > > > 0000:00:02.0: PCI > > > > INT A > > > > > -> GSI 29 (level, low) -> IRQ 29 pci > 0000:00:03.0: > > PCI INT > > > A -> > > > > GSI 24 > > > > > (level, low) -> IRQ 24 pci 0000:00:04.0: PCI > INT A > > -> GSI > > > 25 > > > > (level, > > > > > low) -> IRQ 25 pci 0000:00:05.0: PCI INT A -> > GSI > > 26 > > > (level, low) > > > > -> IRQ > > > > > 26 pci 0000:00:06.0: PCI INT A -> GSI 27 > (level, > > low) -> > > > IRQ 27 > > > > pci > > > > > 0000:00:07.0: PCI INT A -> GSI 30 (level, low) > -> > > IRQ 30 > > > pci > > > > > 0000:00:08.0: PCI INT A -> GSI 31 (level, low) > -> > > IRQ 31 > > > pci > > > > > 0000:00:09.0: PCI INT A -> GSI 32 (level, low) > -> > > IRQ 32 > > > pci > > > > > 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) > -> > > IRQ 33 > > > pci > > > > > 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) > -> > > IRQ 16 > > > > > xen_allocate_pirq: returning irq 16 for gsi 16 > > Already > > > setup the > > > > GSI :16 > > > > > pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, > low) > > -> IRQ > > > 16 pci > > > > > 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) > -> > > IRQ 17 > > > NET: > > > > Registered > > > > > protocol family 2 IP route cache hash table > > entries: 65536 > > > > (order: 7, > > > > > 524288 bytes) TCP established hash table > entries: > > 262144 > > > (order: > > > > 10, > > > > > 4194304 bytes) TCP bind hash table entries: > 65536 > > (order: > > > 10, > > > > 4718592 > > > > > bytes) TCP: Hash tables configured (established > > 262144 > > > bind > > > > 65536) TCP > > > > > reno registered NET: Registered protocol family > 1 > > pci > > > > 0000:01:00.0: > > > > > Disabling L0s pci 0000:01:00.1: Disabling L0s > > Trying to > > > unpack > > > > rootfs > > > > > image as initramfs... Freeing initrd memory: > 6474k > > freed > > > DMA-API: > > > > > preallocated 32768 debug entries DMA-API: > debugging > > > enabled by > > > > kernel > > > > > config PCI-DMA: Using software bounce buffering > for > > IO > > > (SWIOTLB) > > > > DMA: > > > > > Placing 64MB software IO TLB between > > ffff880007525000 - > > > > ffff88000b525000 > > > > > DMA: software IO TLB at phys 0x7525000 - > 0xb525000 > > audit: > > > > initializing > > > > > netlink socket (disabled) type=2000 > > > audit(1268750702.035:1): > > > > initialized > > > > > HugeTLB registered 2 MB page size, > pre-allocated 0 > > pages > > > VFS: > > > > Disk > > > > > quotas dquot_6.5.2 Dquot-cache hash table > entries: > > 512 > > > (order 0, > > > > 4096 > > > > > bytes) msgmni has been set to 2970 > cryptomgr_test > > used > > > greatest > > > > stack > > > > > depth: 5864 bytes left cryptomgr_test used > greatest > > stack > > > depth: > > > > 5816 > > > > > bytes left alg: No test for stdrng (krng) Block > > layer SCSI > > > > generic (bsg) > > > > > driver version 0.4 loaded (major 252) io > scheduler > > noop > > > > registered io > > > > > scheduler anticipatory registered io scheduler > > deadline > > > > registered io > > > > > scheduler cfq registered (default) pci_hotplug: > PCI > > Hot > > > Plug PCI > > > > Core > > > > > version: 0.5 pciehp 0000:00:09.0:pcie04: HPC > > vendor_id > > > 8086 > > > > device_id > > > > > 3410 ss_vid 0 ss_did 0 pciehp: PCI Express Hot > Plug > > > Controller > > > > Driver > > > > > version: 0.4 acpiphp: ACPI Hot Plug PCI > Controller > > Driver > > > > version: 0.5 > > > > > acpiphp_glue: Slot 2 already registered by > another > > hotplug > > > driver > > > > > acpiphp_glue: Slot 2 already registered by > another > > hotplug > > > driver > > > > > acpiphp_glue: Slot 2 already registered by > another > > hotplug > > > driver > > > > > acpiphp_glue: Slot 2 already registered by > another > > hotplug > > > driver > > > > > acpiphp_glue: Slot 2 already registered by > another > > hotplug > > > driver > > > > > acpiphp_glue: Slot 2 already registered by > another > > hotplug > > > driver > > > > > acpiphp_glue: Slot 2 already registered by > another > > hotplug > > > driver > > > > > acpiphp_glue: Slot 2 already registered by > another > > hotplug > > > driver > > > > > pci-stub: invalid id string "" input: Sleep > Button > > as > > > > > > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 > > > ACPI: > > > > Sleep > > > > > Button [SLPB] input: Power Button as > > > > > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > ACPI: > > Power > > > Button > > > > [PWRF] > > > > > registering netback hpet_acpi_add: no address > or > > irqs in > > > _CRS > > > > > Non-volatile memory driver v1.3 Linux agpgart > > interface > > > v0.103 > > > > Serial: > > > > > 8250/16550 driver, 4 ports, IRQ sharing enabled > > > serial8250: ttyS1 > > > > at I/O > > > > > 0x2f8 (irq = 3) is a 16550A brd: module loaded > > loop: > > > module > > > > loaded > > > > > input: Macintosh mouse button emulation as > > > > /devices/virtual/input/input2 > > > > > ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, > low) > > -> IRQ > > > 19 > > > > ahci > > > > > 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 > > Gbps 0x3f > > > impl > > > > SATA mode > > > > > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led > clo > > pio > > > slum part > > > > ccc > > > > > ems scsi0 : ahci scsi1 : ahci scsi2 : ahci > scsi3 : > > ahci > > > scsi4 : > > > > ahci > > > > > scsi5 : ahci ata1: SATA max UDMA/133 irq_stat > > 0x00400040, > > > > connection > > > > > status changed irq 2996 ata2: SATA max UDMA/133 > > abar > > > > m2048@0xb1a00000 > > > > > port 0xb1a00180 irq 2996 ata3: SATA max > UDMA/133 > > abar > > > > m2048@0xb1a00000 > > > > > port 0xb1a00200 irq 2996 ata4: SATA max > UDMA/133 > > abar > > > > m2048@0xb1a00000 > > > > > port 0xb1a00280 irq 2996 ata5: SATA max > UDMA/133 > > abar > > > > m2048@0xb1a00000 > > > > > port 0xb1a00300 irq 2996 ata6: SATA max > UDMA/133 > > abar > > > > m2048@0xb1a00000 > > > > > port 0xb1a00380 irq 2996 Fixed MDIO Bus: probed > > ehci_hcd: > > > USB 2.0 > > > > > 'Enhanced' Host Controller (EHCI) Driver > ehci_hcd > > > 0000:00:1a.7: > > > > PCI INT > > > > > C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd > > 0000:00:1a.7: > > > EHCI > > > > Host > > > > > Controller ehci_hcd 0000:00:1a.7: new USB bus > > registered, > > > > assigned bus > > > > > number 1 ehci_hcd 0000:00:1a.7: debug port 1 > > ehci_hcd > > > > 0000:00:1a.7: irq > > > > > 18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7: > USB > > 2.0 > > > started, > > > > EHCI 1.00 > > > > > usb usb1: New USB device found, idVendor=1d6b, > > > idProduct=0002 usb > > > > usb1: > > > > > New USB device strings: Mfr=3, Product=2, > > SerialNumber=1 > > > usb > > > > usb1: > > > > > Product: EHCI Host Controller usb usb1: > > Manufacturer: > > > Linux > > > > 2.6.32.9 > > > > > ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 > usb > > usb1: > > > > configuration #1 > > > > > chosen from 1 choice hub 1-0:1.0: USB hub found > hub > > > 1-0:1.0: 6 > > > > ports > > > > > detected ehci_hcd 0000:00:1d.7: PCI INT A -> > GSI 23 > > > (level, low) > > > > -> IRQ > > > > > 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller > > ehci_hcd > > > > 0000:00:1d.7: > > > > > new USB bus registered, assigned bus number 2 > > ehci_hcd > > > > 0000:00:1d.7: > > > > > debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io > mem > > > 0xb1a01000 > > > > ehci_hcd > > > > > 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb > usb2: > > New USB > > > device > > > > found, > > > > > idVendor=1d6b, idProduct=0002 usb usb2: New USB > > device > > > strings: > > > > Mfr=3, > > > > > Product=2, SerialNumber=1 usb usb2: Product: > EHCI > > Host > > > Controller > > > > usb > > > > > usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd usb > > usb2: > > > > SerialNumber: > > > > > 0000:00:1d.7 usb usb2: configuration #1 chosen > from > > 1 > > > choice hub > > > > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports > > detected > > > ohci_hcd: > > > > USB 1.1 > > > > > 'Open' Host Controller (OHCI) Driver uhci_hcd: > USB > > > Universal Host > > > > > Controller Interface driver xen_allocate_pirq: > > returning > > > irq 16 > > > > for gsi > > > > > 16 Already setup the GSI :16 uhci_hcd > 0000:00:1a.0: > > PCI > > > INT A -> > > > > GSI 16 > > > > > (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: > UHCI > > Host > > > > Controller > > > > > uhci_hcd 0000:00:1a.0: new USB bus registered, > > assigned > > > bus > > > > number 3 > > > > > uhci_hcd 0000:00:1a.0: irq 16, io base > 0x000020e0 > > usb > > > usb3: New > > > > USB > > > > > device found, idVendor=1d6b, idProduct=0001 usb > > usb3: New > > > USB > > > > device > > > > > strings: Mfr=3, Product=2, SerialNumber=1 usb > usb3: > > > Product: UHCI > > > > Host > > > > > Controller usb usb3: Manufacturer: Linux > 2.6.32.9 > > uhci_hcd > > > usb > > > > usb3: > > > > > SerialNumber: 0000:00:1a.0 usb usb3: > configuration > > #1 > > > chosen from > > > > 1 > > > > > choice hub 3-0:1.0: USB hub found hub 3-0:1.0: > 2 > > ports > > > detected > > > > uhci_hcd > > > > > 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) > -> > > IRQ 21 > > > uhci_hcd > > > > > 0000:00:1a.1: UHCI Host Controller uhci_hcd > > 0000:00:1a.1: > > > new USB > > > > bus > > > > > registered, assigned bus number 4 uhci_hcd > > 0000:00:1a.1: > > > irq 21, > > > > io base > > > > > 0x000020c0 usb usb4: New USB device found, > > idVendor=1d6b, > > > > idProduct=0001 > > > > > usb usb4: New USB device strings: Mfr=3, > Product=2, > > > > SerialNumber=1 usb > > > > > usb4: Product: UHCI Host Controller usb usb4: > > > Manufacturer: Linux > > > > > 2.6.32.9 uhci_hcd usb usb4: SerialNumber: > > 0000:00:1a.1 usb > > > usb4: > > > > > configuration #1 chosen from 1 choice hub > 4-0:1.0: > > USB hub > > > found > > > > hub > > > > > 4-0:1.0: 2 ports detected xen_allocate_pirq: > > returning irq > > > 19 for > > > > gsi 19 > > > > > Already setup the GSI :19 uhci_hcd > 0000:00:1a.2: > > PCI INT D > > > -> GSI > > > > 19 > > > > > (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: > UHCI > > Host > > > > Controller > > > > > uhci_hcd 0000:00:1a.2: new USB bus registered, > > assigned > > > bus > > > > number 5 > > > > > uhci_hcd 0000:00:1a.2: irq 19, io base > 0x000020a0 > > usb > > > usb5: New > > > > USB > > > > > device found, idVendor=1d6b, idProduct=0001 usb > > usb5: New > > > USB > > > > device > > > > > strings: Mfr=3, Product=2, SerialNumber=1 usb > usb5: > > > Product: UHCI > > > > Host > > > > > Controller usb usb5: Manufacturer: Linux > 2.6.32.9 > > uhci_hcd > > > usb > > > > usb5: > > > > > SerialNumber: 0000:00:1a.2 usb usb5: > configuration > > #1 > > > chosen from > > > > 1 > > > > > choice hub 5-0:1.0: USB hub found hub 5-0:1.0: > 2 > > ports > > > detected > > > > > xen_allocate_pirq: returning irq 23 for gsi 23 > > Already > > > setup the > > > > GSI :23 > > > > > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 > (level, > > low) -> > > > IRQ 23 > > > > > uhci_hcd 0000:00:1d.0: UHCI Host Controller > > uhci_hcd > > > > 0000:00:1d.0: new > > > > > USB bus registered, assigned bus number 6 > uhci_hcd > > > 0000:00:1d.0: > > > > irq 23, > > > > > io base 0x00002080 usb usb6: New USB device > found, > > > idVendor=1d6b, > > > > > idProduct=0001 usb usb6: New USB device > strings: > > Mfr=3, > > > > Product=2, > > > > > SerialNumber=1 usb usb6: Product: UHCI Host > > Controller usb > > > usb6: > > > > > Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb6: > > > SerialNumber: > > > > > 0000:00:1d.0 usb usb6: configuration #1 chosen > from > > 1 > > > choice hub > > > > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports > > detected > > > > xen_allocate_pirq: > > > > > returning irq 19 for gsi 19 Already setup the > GSI > > :19 > > > uhci_hcd > > > > > 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) > -> > > IRQ 19 > > > uhci_hcd > > > > > 0000:00:1d.1: UHCI Host Controller uhci_hcd > > 0000:00:1d.1: > > > new USB > > > > bus > > > > > registered, assigned bus number 7 uhci_hcd > > 0000:00:1d.1: > > > irq 19, > > > > io base > > > > > 0x00002060 usb usb7: New USB device found, > > idVendor=1d6b, > > > > idProduct=0001 > > > > > usb usb7: New USB device strings: Mfr=3, > Product=2, > > > > SerialNumber=1 usb > > > > > usb7: Product: UHCI Host Controller usb usb7: > > > Manufacturer: Linux > > > > > 2.6.32.9 uhci_hcd usb usb7: SerialNumber: > > 0000:00:1d.1 usb > > > usb7: > > > > > configuration #1 chosen from 1 choice hub > 7-0:1.0: > > USB hub > > > found > > > > hub > > > > > 7-0:1.0: 2 ports detected xen_allocate_pirq: > > returning irq > > > 18 for > > > > gsi 18 > > > > > Already setup the GSI :18 uhci_hcd > 0000:00:1d.2: > > PCI INT C > > > -> GSI > > > > 18 > > > > > (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: > UHCI > > Host > > > > Controller > > > > > uhci_hcd 0000:00:1d.2: new USB bus registered, > > assigned > > > bus > > > > number 8 > > > > > uhci_hcd 0000:00:1d.2: irq 18, io base > 0x00002040 > > usb > > > usb8: New > > > > USB > > > > > device found, idVendor=1d6b, idProduct=0001 usb > > usb8: New > > > USB > > > > device > > > > > strings: Mfr=3, Product=2, SerialNumber=1 usb > usb8: > > > Product: UHCI > > > > Host > > > > > > > References > > > > Visible links > > 1. mailto:pasik@iki.fi > > 2. mailto:pasik@iki.fi > > 3. mailto:pasik@iki.fi > > 4. mailto:pasik@iki.fi > > 5. mailto:pasik@iki.fi > > 6. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 7. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 8. mailto:pasik@iki.fi > > 9. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 10. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 11. mailto:pasik@iki.fi > > 12. mailto:pasik@iki.fi > > 13. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 14. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 15. mailto:pasik@iki.fi > > 16. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 17. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 18. mailto:pasik@iki.fi > [-- Attachment #1.2: Type: text/html, Size: 118535 bytes --] [-- Attachment #2: Type: text/plain, Size: 137 bytes --] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-18 20:23 ` kishore kumar @ 2010-03-18 21:27 ` Pasi Kärkkäinen 2010-03-18 23:56 ` kishore kumar 2010-03-23 15:23 ` Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 Tobias Geiger 0 siblings, 2 replies; 32+ messages in thread From: Pasi Kärkkäinen @ 2010-03-18 21:27 UTC (permalink / raw) To: kishore kumar; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar wrote: > pvdisplay does not work in my RHEL machine. > > I did pvscan. > below is the output. > > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free] > > Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no VG: 0 [0 ] > Ok so /dev/sda2 is the correct device holding the VolGroup01. Looking at your latest capture.doc I see this: Command line: ro root=/dev/vg00/lv01 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug swiotlb=force apic=debug loglevel=10 So your root= parameter is wrong! Edit grub.conf and replace it with the actual root device: root=/dev/VolGroup01/LogVol00 -- Pasi > On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen <[1]pasik@iki.fi> wrote: > > On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore kumar wrote: > > I did the below steps for pvops dom 0 kernel. > > > > make menuconfig > > make bzImage > > make modules > > make modules_install > > cp -a .config /boot/config-2.6.32.10 > > cp -a System.map /boot/System.map-2.6.32.10 > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10 > > /sbin/mkinitrd -f --builtin=ahci /boot/initrd-2.6.32.10.img > 2.6.32.10 > > I tried root=/dev/VolGroup01/LogVol00 . > > > > Ok. > > Please run "pvdisplay" to see which actual partition is the LVM PV for > your > volume group. > > Also if you're running Fedora 12 you could try generating an initrd > image > with dracut instead of mkinitrd. > > -- Pasi > > > > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen > <[1][2]pasik@iki.fi> wrote: > > > > On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore kumar wrote: > > > Here is the output of df -h and cat /etc/fstab of my > machine. > > > > > > > Did you try both root=/dev/mapper/VolGroup01-LogVol00 and > > root=/dev/VolGroup01/LogVol00 arguments for the dom0 kernel? > > > > How did you generate the initrd image for the dom0 kernel? > > > > Anyway this sounds like a grub.conf or initrd problem, not Xen or > pvops > > dom0 kernel kernel problem. > > > > -- Pasi > > > > > Please let me know your thoughts. > > > > > > [root@localhost kishore]# df -h > > > > > > Filesystem Size Used Avail Use% Mounted on > > > > > > /dev/mapper/VolGroup01-LogVol00 > > > > > > 223G 29G 182G 14% / > > > > > > /dev/sda1 99M 81M 13M 87% /boot > > > > > > tmpfs 757M 0 757M 0% /dev/shm > > > > > > [root@localhost kishore]# cat /etc/fstab > > > > > > /dev/VolGroup01/LogVol00 / ext3 defaults 1 1 > > > > > > LABEL=/boot /boot ext3 defaults 1 2 > > > > > > tmpfs /dev/shm tmpfs defaults 0 0 > > > > > > devpts /dev/pts devpts gid=5,mode=620 0 0 > > > > > > sysfs /sys sysfs defaults 0 0 > > > > > > proc /proc proc defaults 0 0 > > > > > > /dev/VolGroup01/LogVol01 swap swap defaults 0 0 > > > > > > [root@localhost kishore]# > > > > > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen > > <[1][2][3]pasik@iki.fi> wrote: > > > > > > On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore kumar > wrote: > > > > I am not sure. Can you please let me know how to > check > > this? any > > > command > > > > ?? > > > > > > well simple "df -h" will show it. and also "cat > /etc/fstab". > > > You can also check it from your grub configuration.. from > the > > working > > > baremetal (non-Xen) entry. > > > > > > -- Pasi > > > > > > > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi Kärkkäinen > > > <[1][2][3][4]pasik@iki.fi> wrote: > > > > > > > > On Tue, Mar 16, 2010 at 03:22:50PM -0700, kishore > kumar > > wrote: > > > > > attached is the log captured in with the word > > document . > > > > > > > > > > > > > Scanning logical volumes > > > > Reading all physical volumes. This may take a > while... > > > > Activating logical volumes > > > > Volume group "VolGroup01" not found > > > > Trying to resume from /dev/VolGroup01/LogVol01 > > > > Unable to access resume device > (/dev/VolGroup01/LogVol01) > > > > Creating root device. > > > > Mounting root filesystem. > > > > mount: could not find filesystem '/dev/root' > > > > Setting up other filesystems. > > > > Setting up new root fs > > > > setuproot: moving /dev failed: No such file or > directory > > > > no fstab.sys, mounting internal defaults > > > > setuproot: error mounting /proc: No such file or > directory > > > > setuproot: error mounting /sys: No such file or > directory > > > > Switching to new root and running init. > > > > unmounting old /dev > > > > unmounting old /proc > > > > unmounting old /sys > > > > switchroot: mount failed: No such file or directory > > > > init used greatest stack depth: 4088 bytes left > > > > Kernel panic - not syncing: Attempted to kill init! > > > > > > > > So it seems it gets all the way to executing the > initrd > > image, > > > > which then fails to mount the root fs. > > > > > > > > Earlier in the log: > > > > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl > 300) > > > > ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA, > max > > UDMA/133 > > > > ata1.00: 488397168 sectors, multi 0: LBA48 NCQ > (depth > > 31/32), AA > > > > ata1.00: configured for UDMA/133 > > > > scsi 0:0:0:0: Direct-Access ATA Hitachi > HDT72102 > > STBO > > > PQ: 0 > > > > ANSI: 5 > > > > sd 0:0:0:0: Attached scsi generic sg0 type 0 > > > > sd 0:0:0:0: [sda] 488397168 512-byte logical > blocks: (250 > > GB/232 > > > GiB) > > > > sd 0:0:0:0: [sda] Write Protect is off > > > > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > > > sd 0:0:0:0: [sda] Write cache: enabled, read cache: > > enabled, > > > doesn't > > > > support DPO or FUA > > > > sda: sda1 sda2 > > > > sd 0:0:0:0: [sda] Attached SCSI disk > > > > > > > > so /dev/sda was detected. Is your root lvm volume > on > > /dev/sda ? > > > > Is /dev/VolGroup01/LogVol01 really your root fs? > > > > > > > > -- Pasi > > > > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi > Kärkkäinen > > > > <[1][2][3][4][5]pasik@iki.fi> wrote: > > > > > > > > > > On Tue, Mar 16, 2010 at 02:56:06PM -0700, > kishore > > kumar > > > wrote: > > > > > > Please find the attached log file after > fixing > > the > > > dom 0 > > > > kernel cmd > > > > > line > > > > > > as below > > > > > > > > > > > > ro root=/dev/VolGroup01/LogVol00 > console=hvc0 > > > > earlyprintk=xen > > > > > nomodeset > > > > > > > > > > > > > > > > There's something wrong with the log, the > dom0 > > kernel > > > parts are > > > > all on > > > > > one line.. > > > > > It's really difficult to read it. > > > > > > > > > > -- Pasi > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 2:29 PM, Pasi > > Kärkkäinen > > > > > <[1][2][3][4][5][6]pasik@iki.fi> wrote: > > > > > > > > > > > > On Tue, Mar 16, 2010 at 02:16:22PM > -0700, > > kishore > > > kumar > > > > wrote: > > > > > > > I did below steps. > > > > > > > > > > > > > > > > > > > > > I pulled DOM 0 kernel from > > > > > > > git clone > > > > > > > > > > > > > > > > > > > > > git://[1][2][3][4][5][6][7]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > > linux-2.6-xen > > > > > > > > > > > > > > cd linux-2.6-xen > > > > > > > > > > > > > > make clean > > > > > > > > > > > > > > cp -a .config .config-old > > > > > > > > > > > > > > wget -O .config > > > > > > > > > > > > > > > > > > > > > > > > > > > > [2][3][4][5][6][7][8]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > > > > > > > make oldconfig > > > > > > > > > > > > > > make bzImage > > > > > > > > > > > > > > make modules > > > > > > > > > > > > > > make modules_install > > > > > > > > > > > > > > cp -a .config > /boot/config-2.6.32.9 > > > > > > > > > > > > > > cp -a System.map > > /boot/System.map-2.6.32.9 > > > > > > > > > > > > > > cp -a arch/x86/boot/bzImage > > > /boot/vmlinuz-2.6.32.9 > > > > > > > > > > > > > > and modified the grub.conf as > below > > > > > > > > > > > > > > > > > > > > > Root(hd0,0) > > > > > > > > > > > > > > kernel /xen.gz console=vga,com1 > > > com1=115200,8n1 > > > > msi=1 > > > > > iommu=1 > > > > > > > > > > > > > > module /vmlinuz-2.6.32.9 ro > > > > root=/dev/VolGroup01/LogVo100 > > > > > rhgb > > > > > > quiet > > > > > > > > > > > > > > module /initrd-2.6.32.9.img > > > > > > > > > > > > > > > > > > > > > and rebooted the machine. Then > It > > booted with > > > some > > > > xen > > > > > messages > > > > > > and > > > > > > > stopped. Those were the > messages > > captured > > > from > > > > serial > > > > > console. > > > > > > > > > > > > > > Please let me know if I did > something > > wrong > > > here. > > > > > > > > > > > > > > > > > > > Please fix the kernel cmdline based > on my > > earlier > > > email, > > > > and > > > > > capture and > > > > > > post the > > > > > > serial console log again! > > > > > > > > > > > > -- Pasi > > > > > > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 1:20 PM, > Pasi > > > Kärkkäinen > > > > > > <[3][4][5][6][7][8][9]pasik@iki.fi> > wrote: > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at > 01:16:28PM > > -0700, > > > Jeremy > > > > > Fitzhardinge > > > > > > wrote: > > > > > > > > On 03/16/2010 12:48 PM, Pasi > > Kärkkäinen > > > wrote: > > > > > > > >> On Tue, Mar 16, 2010 at > 09:43:44PM > > +0200, > > > Pasi > > > > > Kärkkäinen > > > > > > wrote: > > > > > > > >> > > > > > > > >>> On Tue, Mar 16, 2010 at > > 10:32:17AM > > > -0700, > > > > kishore > > > > > kumar > > > > > > wrote: > > > > > > > >>> > > > > > > > >>>> Attached is the > output > > captured > > > from > > > > serial > > > > > console. > > > > > > > >>>> > > > > > > > >>>> Machine does not boot > after > > > compiling xen > > > > 3.4.3 > > > > > with > > > > > > pv_ops dom > > > > > > > 0 kernel. > > > > > > > >>>> > > > > > > > >>>> Please let me know > what is > > going > > > wrong > > > > here. > > > > > > > >>>> > > > > > > > >>>> > > > > > > > >>> Ok this looks like a bug > that is > > already > > > being > > > > sorted > > > > > out on > > > > > > > xen-devel mailinglist. > > > > > > > >>> I added CC to xen-devel. > > > > > > > >>> > > > > > > > >>> > > > > > > > >> > > > > > > > > > > > > > > > > Those messages are not a > problem in > > > themselves, > > > > but the > > > > > related > > > > > > > problem > > > > > > > > is believed to be fixed in > current > > > > xen/stable-2.6.32.x. > > > > > It > > > > > > looks like > > > > > > > > the output stops there > because the > > Xen > > > console > > > > isn't set > > > > > up > > > > > > properly > > > > > > > for > > > > > > > > some reason. > > > > > > > > > > > > > > > > > > > > > > Yeah, remove "rhgb quiet" from > the > > options.. > > > the > > > > dom0 > > > > > kernel > > > > > > cmdline > > > > > > > should be like this: > > > > > > > ro > root=/dev/VolGroup01/LogVol00 > > > console=hvc0 > > > > > earlyprintk=xen > > > > > > nomodeset > > > > > > > -- Pasi > > > > > > > > > > > > > > References > > > > > > > > > > > > > > Visible links > > > > > > > 1. > > > > > > > > > > > > > > > [5][6][7][8][9][10]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > > 2. > > > > > > > > > > > > > > > > > > > > > [6][7][8][9][10][11]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > 3. > mailto:[7][8][9][10][11][12]pasik@iki.fi > > > > > > > > > > > > References > > > > > > > > > > > > Visible links > > > > > > 1. > mailto:[9][10][11][12][13]pasik@iki.fi > > > > > > 2. > > > > > > > > > > > > > > > [10][11][12][13][14]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > 3. > > > > > > > > > > > > > > > [11][12][13][14][15]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > 4. > mailto:[12][13][14][15][16]pasik@iki.fi > > > > > > 5. > > > > > > > > > > > > > > > [13][14][15][16][17]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > 6. > > > > > > > > > > > > > > > [14][15][16][17][18]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > 7. > mailto:[15][16][17][18][19]pasik@iki.fi > > > > > > Asserting Post complete GPIO!!! > > > > > > Transfer control to CSM 16-bit binary for > legacy > > boot > > > > > > __ __ _____ _ _ _____ > > _ _ > > > > > > \ \/ /___ _ __ |___ /| || | |___ / > _ __ > > ___| || | > > > _ > > > > __ _ > > > > > __ ___ > > > > > > \ // _ \ '_ \ |_ \| || |_ |_ \ __| > '__/ > > __| || > > > |_ __| > > > > '_ \| > > > > > '__/ _ \ > > > > > > / \ __/ | | | ___) |__ _| ___) |__| > | | > > (__|__ > > > _|__| > > > > |_) | | > > > > > | __/ > > > > > > /_/\_\___|_| |_| |____(_) |_|(_)____/ > |_| > > \___| |_| > > > | > > > > .__/|_| > > > > > \___| > > > > > > > > > |_| > > > > > > (XEN) Xen version 3.4.3-rc4-pre > > (kishore@localdomain) > > > (gcc > > > > version > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar > 15 > > 13:44:31 PDT > > > 2010 > > > > > > (XEN) Latest ChangeSet: Tue Mar 09 > 18:15:52 2010 > > +0000 > > > > > 19924:6e72f8c3c017 > > > > > > (XEN) Command line: console=vga,com1 > > com1=115200,8n1 > > > msi=1 > > > > iommu=1 > > > > > > (XEN) Video information: > > > > > > (XEN) VGA is text mode 80x25, font 8x16 > > > > > > (XEN) VBE/DDC methods: none; EDID > transfer time: > > 0 > > > seconds > > > > > > (XEN) EDID info not retrieved because no > DDC > > retrieval > > > method > > > > > detected > > > > > > (XEN) Disc information: > > > > > > (XEN) Found 1 MBR signatures > > > > > > (XEN) Found 1 EDD information structures > > > > > > (XEN) Xen-e820 RAM map: > > > > > > (XEN) 0000000000000000 - 000000000009d000 > > (usable) > > > > > > (XEN) 000000000009d000 - 00000000000a0000 > > (reserved) > > > > > > (XEN) 00000000000e0000 - 0000000000100000 > > (reserved) > > > > > > (XEN) 0000000000100000 - 000000006d597000 > > (usable) > > > > > > (XEN) 000000006d597000 - 000000006d686000 > > (reserved) > > > > > > (XEN) 000000006d686000 - 000000006f598000 > > (usable) > > > > > > (XEN) 000000006f598000 - 000000006f59a000 > > (reserved) > > > > > > (XEN) 000000006f59a000 - 000000006f5af000 > (ACPI > > NVS) > > > > > > (XEN) 000000006f5af000 - 000000006f5d9000 > > (reserved) > > > > > > (XEN) 000000006f5d9000 - 000000006f5f9000 > (ACPI > > data) > > > > > > (XEN) 000000006f5f9000 - 000000006f6df000 > (ACPI > > NVS) > > > > > > (XEN) 000000006f6df000 - 000000006f700000 > (ACPI > > data) > > > > > > (XEN) 000000006f700000 - 0000000080000000 > > (reserved) > > > > > > (XEN) 00000000a0000000 - 00000000b0000000 > > (reserved) > > > > > > (XEN) 00000000fc000000 - 00000000fd000000 > > (reserved) > > > > > > (XEN) 00000000fed1c000 - 00000000fed20000 > > (reserved) > > > > > > (XEN) 00000000ffc00000 - 0000000100000000 > > (reserved) > > > > > > (XEN) System RAM: 1780MB (1823000kB) > > > > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL > ) > > > > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL > THRLY > > > 0 > > > > > 1000013) > > > > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL > THRLY > > > 0 > > > > MSFT > > > > > 100000D) > > > > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL > THRLY > > > 3 > > > > MSFT > > > > > 100000D) > > > > > > (XEN) ACPI: FACS 6F5F9000, 0040 > > > > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL > THRLY > > > 0 > > > > MSFT > > > > > 100000D) > > > > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL > THRLY > > > 1 > > > > MSFT > > > > > 100000D) > > > > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL > THRLY > > > 1 > > > > MSFT > > > > > 100000D) > > > > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL > THRLY > > > 1 > > > > MSFT > > > > > 100000D) > > > > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL > THRLY > > > 0 > > > > MSFT > > > > > 100000D) > > > > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 > INTEL SSDT > > PM > > > 4000 > > > > INTL > > > > > 20061109) > > > > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL > THRLY > > > 1 > > > > MSFT > > > > > 100000D) > > > > > > (XEN) Domain heap initialised > > > > > > (XEN) Processor #0 6:12 APIC version 21 > > > > > > (XEN) Processor #2 6:12 APIC version 21 > > > > > > (XEN) Processor #4 6:12 APIC version 21 > > > > > > (XEN) Processor #16 6:12 APIC version 21 > > > > > > (XEN) Processor #18 6:12 APIC version 21 > > > > > > (XEN) Processor #20 6:12 APIC version 21 > > > > > > (XEN) Processor #1 6:12 APIC version 21 > > > > > > (XEN) Processor #3 6:12 APIC version 21 > > > > > > (XEN) Processor #5 6:12 APIC version 21 > > > > > > (XEN) Processor #17 6:12 APIC version 21 > > > > > > (XEN) Processor #19 6:12 APIC version 21 > > > > > > (XEN) Processor #21 6:12 APIC version 21 > > > > > > (XEN) IOAPIC[0]: apic_id 8, version 32, > address > > > 0xfec00000, GSI > > > > 0-23 > > > > > > (XEN) IOAPIC[1]: apic_id 9, version 32, > address > > > 0xfec90000, GSI > > > > 24-47 > > > > > > (XEN) Enabling APIC mode: Phys. Using 2 > I/O > > APICs > > > > > > (XEN) Intel VT-d DMAR tables have been > parsed. > > > > > > (XEN) Using scheduler: SMP Credit > Scheduler > > (credit) > > > > > > (XEN) Detected 3200.207 MHz processor. > > > > > > (XEN) VMX: Supported advanced features: > > > > > > (XEN) - APIC MMIO access virtualisation > > > > > > (XEN) - APIC TPR shadow > > > > > > (XEN) - Extended Page Tables (EPT) > > > > > > (XEN) - Virtual-Processor Identifiers > (VPID) > > > > > > (XEN) - Virtual NMI > > > > > > (XEN) - MSR direct-access bitmap > > > > > > (XEN) VMX: EPT is available. > > > > > > (XEN) VMX: VPID is available. > > > > > > (XEN) HVM: VMX enabled > > > > > > (XEN) HVM: Hardware Assisted Paging > detected. > > > > > > (XEN) CPU0: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 1/2 eip 88000 > > > > > > (XEN) CPU1: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 2/4 eip 88000 > > > > > > (XEN) CPU2: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 3/16 eip 88000 > > > > > > (XEN) CPU3: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 4/18 eip 88000 > > > > > > (XEN) CPU4: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 5/20 eip 88000 > > > > > > (XEN) CPU5: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 6/1 eip 88000 > > > > > > (XEN) CPU6: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 7/3 eip 88000 > > > > > > (XEN) CPU7: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 8/5 eip 88000 > > > > > > (XEN) CPU8: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 9/17 eip 88000 > > > > > > (XEN) CPU9: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 10/19 eip 88000 > > > > > > (XEN) CPU10: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Booting processor 11/21 eip 88000 > > > > > > (XEN) CPU11: Intel Genuine Intel(R) CPU > > 000 > > > @ > > > > 3.20GHz > > > > > stepping 00 > > > > > > (XEN) Total of 12 processors activated. > > > > > > (XEN) ENABLING IO-APIC IRQs > > > > > > (XEN) -> Using new ACK method > > > > > > (XEN) checking TSC synchronization across > 12 > > CPUs: > > > passed. > > > > > > (XEN) Platform timer is 14.318MHz HPET > > > > > > ?(XEN) Brought up 12 CPUs > > > > > > (XEN) Intel VT-d Snoop Control supported. > > > > > > (XEN) Intel VT-d DMA Passthrough not > supported. > > > > > > (XEN) Intel VT-d Queued Invalidation > supported. > > > > > > (XEN) Intel VT-d Interrupt Remapping > supported. > > > > > > (XEN) I/O virtualisation enabled > > > > > > (XEN) I/O virtualisation for PV guests > disabled > > > > > > (XEN) xenoprof: Initialization failed. > Intel > > processor > > > model 44 > > > > for P6 > > > > > class family is not supported > > > > > > (XEN) *** LOADING DOMAIN 0 *** > > > > > > (XEN) Xen kernel: 64-bit, lsb, compat32 > > > > > > (XEN) Dom0 kernel: 64-bit, PAE, lsb, > paddr > > 0x1000000 -> > > > > 0x26bb000 > > > > > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > > > > > (XEN) Dom0 alloc.: > > 0000000064000000->0000000068000000 > > > > (404490 pages > > > > > to be allocated) > > > > > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > > > > > (XEN) Loaded kernel: > > ffffffff81000000->ffffffff826bb000 > > > > > > (XEN) Init. ramdisk: > > ffffffff826bb000->ffffffff82d0d800 > > > > > > (XEN) Phys-Mach map: > > ffffffff82d0e000->ffffffff83044050 > > > > > > (XEN) Start info: > > ffffffff83045000->ffffffff830454b4 > > > > > > (XEN) Page tables: > > ffffffff83046000->ffffffff83063000 > > > > > > (XEN) Boot stack: > > ffffffff83063000->ffffffff83064000 > > > > > > (XEN) TOTAL: > > ffffffff80000000->ffffffff83400000 > > > > > > (XEN) ENTRY ADDRESS: ffffffff819c1200 > > > > > > (XEN) Dom0 has maximum 12 VCPUs > > > > > > (XEN) Scrubbing Free RAM: .done. > > > > > > (XEN) Xen trace buffers: disabled > > > > > > (XEN) Std. Loglevel: Errors and warnings > > > > > > (XEN) Guest Loglevel: Nothing > (Rate-limited: > > Errors and > > > > warnings) > > > > > > (XEN) Xen is relinquishing VGA console. > > > > > > (XEN) *** Serial input -> DOM0 (type > 'CTRL-a' > > three > > > times to > > > > switch > > > > > input to Xen) > > > > > > (XEN) Freed 128kB init memory. > > > > > > mapping kernel into physical memory > > > > > > Xen: setup ISA identity maps > > > > > > about to get started... > > > > > > Initializing cgroup subsys cpuset > > > > > > Initializing cgroup subsys cpu > > > > > > Linux version 2.6.32.9 > > (kishore@localhost.localdomain) > > > (gcc > > > > version > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP > Mon Mar > > 15 > > > 15:16:28 PDT > > > > 2010 > > > > > > Command line: ro > root=/dev/VolGroup01/LogVol00 > > > console=hvc0 > > > > > earlyprintk=xen nomodeset > > > > > > KERNEL supported cpus: > > > > > > Intel GenuineIntel > > > > > > AMD AuthenticAMD > > > > > > Centaur CentaurHauls > > > > > > BIOS-provided physical RAM map: > > > > > > Xen: 0000000000000000 - 000000000009d000 > > (usable) > > > > > > Xen: 000000000009d000 - 0000000000100000 > > (reserved) > > > > > > Xen: 0000000000100000 - 0000000066c0a000 > > (usable) > > > > > > Xen: 000000006d597000 - 000000006d686000 > > (reserved) > > > > > > Xen: 000000006f598000 - 000000006f59a000 > > (reserved) > > > > > > Xen: 000000006f59a000 - 000000006f5af000 > (ACPI > > NVS) > > > > > > Xen: 000000006f5af000 - 000000006f5d9000 > > (reserved) > > > > > > Xen: 000000006f5d9000 - 000000006f5f9000 > (ACPI > > data) > > > > > > Xen: 000000006f5f9000 - 000000006f6df000 > (ACPI > > NVS) > > > > > > Xen: 000000006f6df000 - 000000006f700000 > (ACPI > > data) > > > > > > Xen: 000000006f700000 - 0000000080000000 > > (reserved) > > > > > > Xen: 00000000a0000000 - 00000000b0000000 > > (reserved) > > > > > > Xen: 00000000fc000000 - 00000000fd000000 > > (reserved) > > > > > > Xen: 00000000fed1c000 - 00000000fed20000 > > (reserved) > > > > > > Xen: 00000000ffc00000 - 0000000100000000 > > (reserved) > > > > > > bootconsole [xenboot0] enabled > > > > > > DMI 2.4 present. > > > > > > last_pfn = 0x66c0a max_arch_pfn = > 0x400000000 > > > > > > init_memory_mapping: > > 0000000000000000-0000000066c0a000 > > > > > > RAMDISK: 026bb000 - 02d0d800 > > > > > > ACPI: RSDP 00000000000f03f0 00024 (v02 > INTEL ) > > > > > > ACPI: XSDT 000000006f6fe120 00064 (v01 > INTEL > > THRLY > > > 00000000 > > > > > 01000013) > > > > > > ACPI: FACP 000000006f6fd000 000F4 (v04 > INTEL > > THRLY > > > 00000000 > > > > MSFT > > > > > 0100000D) > > > > > > ACPI: DSDT 000000006f6f5000 074F1 (v02 > INTEL > > THRLY > > > 00000003 > > > > MSFT > > > > > 0100000D) > > > > > > ACPI: FACS 000000006f5f9000 00040 > > > > > > ACPI: APIC 000000006f6f4000 001CC (v02 > INTEL > > THRLY > > > 00000000 > > > > MSFT > > > > > 0100000D) > > > > > > ACPI: MCFG 000000006f6f3000 0003C (v01 > INTEL > > THRLY > > > 00000001 > > > > MSFT > > > > > 0100000D) > > > > > > ACPI: HPET 000000006f6f2000 00038 (v01 > INTEL > > THRLY > > > 00000001 > > > > MSFT > > > > > 0100000D) > > > > > > ACPI: SLIT 000000006f6f1000 00030 (v01 > INTEL > > THRLY > > > 00000001 > > > > MSFT > > > > > 0100000D) > > > > > > ACPI: WDDT 000000006f6f0000 00040 (v01 > INTEL > > THRLY > > > 00000000 > > > > MSFT > > > > > 0100000D) > > > > > > ACPI: SSDT 000000006f5d9000 1FDDC (v01 > INTEL > > SSDT PM > > > 00004000 > > > > INTL > > > > > 20061109) > > > > > > ACPI: 000000006f6ee000 001D0 (v01 > INTEL > > THRLY > > > 00000001 > > > > MSFT > > > > > 0100000D) > > > > > > No NUMA configuration found > > > > > > Faking a node at > > 0000000000000000-0000000066c0a000 > > > > > > Bootmem setup node 0 > > 0000000000000000-0000000066c0a000 > > > > > > NODE_DATA [0000000000008000 - > 000000000001ffff] > > > > > > bootmap [0000000000020000 - > 000000000002cd87] > > pages d > > > > > > (9 early reservations) ==> bootmem > [0000000000 - > > > 0066c0a000] > > > > > > #0 [0000000000 - 0000001000] BIOS data > page > > ==> > > > [0000000000 > > > > - > > > > > 0000001000] > > > > > > #1 [0003046000 - 0003063000] XEN > PAGETABLES > > ==> > > > [0003046000 > > > > - > > > > > 0003063000] > > > > > > #2 [0000006000 - 0000008000] > TRAMPOLINE > > ==> > > > [0000006000 > > > > - > > > > > 0000008000] > > > > > > #3 [0001000000 - 000269ae98] TEXT > DATA BSS > > ==> > > > [0001000000 > > > > - > > > > > 000269ae98] > > > > > > #4 [00026bb000 - 0002d0d800] > RAMDISK > > ==> > > > [00026bb000 > > > > - > > > > > 0002d0d800] > > > > > > #5 [0002d0e000 - 0003046000] XEN START > INFO > > ==> > > > [0002d0e000 > > > > - > > > > > 0003046000] > > > > > > #6 [000269b000 - 000269b011] > BRK > > ==> > > > [000269b000 > > > > - > > > > > 000269b011] > > > > > > #7 [0000100000 - 000041a000] > PGTABLE > > ==> > > > [0000100000 > > > > - > > > > > 000041a000] > > > > > > #8 [0000001000 - 0000001030] ACPI > SLIT > > ==> > > > [0000001000 > > > > - > > > > > 0000001030] > > > > > > found SMP MP-table at [ffff8800000fd750] > fd750 > > > > > > Zone PFN ranges: > > > > > > DMA 0x00000000 -> 0x00001000 > > > > > > DMA32 0x00001000 -> 0x00100000 > > > > > > Normal 0x00100000 -> 0x00100000 > > > > > > Movable zone start PFN for each node > > > > > > early_node_map[2] active PFN ranges > > > > > > 0: 0x00000000 -> 0x0000009d > > > > > > 0: 0x00000100 -> 0x00066c0a > > > > > > ACPI: PM-Timer IO Port: 0x408 > > > > > > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] > > enabled) > > > > > > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] > > disabled) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x00] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x01] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x02] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x03] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x04] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x05] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x06] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x07] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x08] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x09] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x10] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x11] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x12] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x13] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x14] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x15] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x16] high level > > lint[0x1]) > > > > > > ACPI: LAPIC_NMI (acpi_id[0x17] high level > > lint[0x1]) > > > > > > ACPI: IOAPIC (id[0x08] address[0xfec00000] > > gsi_base[0]) > > > > > > IOAPIC[0]: apic_id 8, version 0, address > > 0xfec00000, GSI > > > 0-0 > > > > > > ACPI: IOAPIC (id[0x09] address[0xfec90000] > > gsi_base[24]) > > > > > > IOAPIC[1]: apic_id 9, version 0, address > > 0xfec90000, GSI > > > 24-24 > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 > global_irq 2 > > dfl dfl) > > > > > > ERROR: Unable to locate IOAPIC for GSI 2 > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 > global_irq 9 > > high > > > level) > > > > > > ERROR: Unable to locate IOAPIC for GSI 9 > > > > > > Using ACPI (MADT) for SMP configuration > > information > > > > > > ACPI: HPET id: 0x8086a401 base: 0xfed00000 > > > > > > SMP: Allowing 12 CPUs, 0 hotplug CPUs > > > > > > PM: Registered nosave memory: > 000000000009d000 - > > > > 0000000000100000 > > > > > > Allocating PCI resources starting at > b0000000 > > (gap: > > > > b0000000:4c000000) > > > > > > Booting paravirtualized kernel on Xen > > > > > > Xen version: 3.4.3-rc4-pre (preserve-AD) > (dom0) > > > > > > NR_CPUS:512 nr_cpumask_bits:512 > nr_cpu_ids:12 > > > nr_node_ids:1 > > > > > > PERCPU: Embedded 478 pages/cpu > @ffff880005ebc000 > > > s1928024 r8192 > > > > d21672 > > > > > u1957888 > > > > > > pcpu-alloc: s1928024 r8192 d21672 u1957888 > > > alloc=478*4096 > > > > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 > [0] 04 > > [0] 05 > > > [0] 06 > > > > [0] 07 > > > > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 > > > > > > Xen: using vcpu_info placement > > > > > > Built 1 zonelists in Node order, mobility > > grouping on. > > > Total > > > > pages: > > > > > 409291 > > > > > > Policy zone: DMA32 > > > > > > Kernel command line: ro > > root=/dev/VolGroup01/LogVol00 > > > > console=hvc0 > > > > > earlyprintk=xen nomodeset > > > > > > PID hash table entries: 4096 (order: 3, > 32768 > > bytes) > > > > > > Initializing CPU#0 > > > > > > DMA: Placing 64MB software IO TLB between > > > ffff880007525000 - > > > > > ffff88000b525000 > > > > > > DMA: software IO TLB at phys 0x7525000 - > > 0xb525000 > > > > > > xen_swiotlb_fixup: buf=ffff880007525000 > > size=67108864 > > > > > > xen_swiotlb_fixup: buf=ffff88000b585000 > > size=32768 > > > > > > Memory: 1514268k/1683496k available (4654k > kernel > > code, > > > 396k > > > > absent, > > > > > 168832k reserved, 3443k data, 3396k init) > > > > > > SLUB: Genslabs=14, HWalign=64, Order=0-3, > > MinObjects=0, > > > > CPUs=12, > > > > > Nodes=1 > > > > > > Hierarchical RCU implementation. > > > > > > NR_IRQS:4352 nr_irqs:3072 > > > > > > Already setup the GSI :0 > > > > > > Already setup the GSI :1 > > > > > > Already setup the GSI :2 > > > > > > Already setup the GSI :3 > > > > > > Already setup the GSI :4 > > > > > > Already setup the GSI :5 > > > > > > Already setup the GSI :6 > > > > > > Already setup the GSI :7 > > > > > > Already setup the GSI :8 > > > > > > Already setup the GSI :9 > > > > > > Already setup the GSI :10 > > > > > > Already setup the GSI :11 > > > > > > Already setup the GSI :12 > > > > > > Already setup the GSI :13 > > > > > > Already setup the GSI :14 > > > > > > Already setup the GSI :15 > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 > global_irq 2 > > dfl dfl) > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 > global_irq 9 > > high > > > level) > > > > > > xen: sci override: source_irq=9 > global_irq=9 > > trigger=c > > > > polarity=1 > > > > > > xen_allocate_pirq: returning irq 9 for gsi > 9 > > > > > > Already setup the GSI :9 > > > > > > xen: acpi sci 9 > > > > > > Console: colour VGA+ 80x25 > > > > > > console [hvc0] enabled, bootconsole > disabled > > console > > > [hvc0] > > > > enabled, > > > > > bootconsole disabled > > > > > > Lock dependency validator: Copyright (c) > 2006 Red > > Hat, > > > Inc., > > > > Ingo > > > > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... > > MAX_LOCK_DEPTH: > > > > 48 > > > > > ... MAX_LOCKDEP_KEYS: 8191 ... > > CLASSHASH_SIZE: > > > > 4096 ... > > > > > MAX_LOCKDEP_ENTRIES: 16384 ... > > MAX_LOCKDEP_CHAINS: > > > 32768 > > > > ... > > > > > CHAINHASH_SIZE: 16384 memory used > by lock > > > dependency > > > > info: > > > > > 6367 kB per task-struct memory footprint: > 2688 > > bytes > > > allocated > > > > 17039360 > > > > > bytes of page_cgroup please try > > 'cgroup_disable=memory' > > > option if > > > > you > > > > > don't want memory cgroups installing Xen > timer for > > CPU 0 > > > Detected > > > > > 3200.206 MHz processor. Calibrating delay > loop > > (skipped), > > > value > > > > > calculated using timer frequency.. 6400.41 > BogoMIPS > > > (lpj=3200206) > > > > > Security Framework initialized SELinux: > > Initializing. > > > Dentry > > > > cache hash > > > > > table entries: 262144 (order: 9, 2097152 > bytes) > > > Inode-cache hash > > > > table > > > > > entries: 131072 (order: 8, 1048576 bytes) > > Mount-cache hash > > > table > > > > > entries: 256 Initializing cgroup subsys ns > > Initializing > > > cgroup > > > > subsys > > > > > cpuacct Initializing cgroup subsys memory > > Initializing > > > cgroup > > > > subsys > > > > > devices Initializing cgroup subsys freezer > > Initializing > > > cgroup > > > > subsys > > > > > net_cls CPU: L1 I cache: 32K, L1 D cache: > 32K CPU: > > L2 > > > cache: 256K > > > > CPU: > > > > > L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU: > > Unsupported > > > number of > > > > siblings > > > > > 32 Performance Events: unsupported p6 CPU > model 44 > > no PMU > > > driver, > > > > > software events only. lockdep: fixing up > > alternatives. SMP > > > > alternatives: > > > > > switching to UP code ACPI: Core revision > 20090903 > > ftrace: > > > > converting > > > > > mcount calls to 0f 1f 44 00 00 ftrace: > allocating > > 27971 > > > entries > > > > in 110 > > > > > pages installing Xen timer for CPU 1 > lockdep: > > fixing up > > > > alternatives. > > > > > SMP alternatives: switching to SMP code > > Initializing CPU#1 > > > CPU: > > > > L1 I > > > > > cache: 32K, L1 D cache: 32K CPU: L2 cache: > 256K > > CPU: L3 > > > cache: > > > > 12288K > > > > > CPU 1/0x0 -> Node 0 CPU: Unsupported number > of > > siblings 32 > > > > installing > > > > > Xen timer for CPU 2 Initializing CPU#2 CPU: > L1 I > > cache: > > > 32K, L1 D > > > > cache: > > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: > 12288K CPU > > 2/0x0 -> > > > Node 0 > > > > CPU: > > > > > Unsupported number of siblings 32 installing > Xen > > timer for > > > CPU 3 > > > > > Initializing CPU#3 CPU: L1 I cache: 32K, L1 > D > > cache: 32K > > > CPU: L2 > > > > cache: > > > > > 256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node > 0 CPU: > > > Unsupported > > > > number > > > > > of siblings 32 installing Xen timer for CPU > 4 > > Initializing > > > CPU#4 > > > > CPU: L1 > > > > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: > 256K > > CPU: L3 > > > cache: > > > > 12288K > > > > > CPU 4/0x0 -> Node 0 CPU: Unsupported number > of > > siblings 32 > > > > installing > > > > > Xen timer for CPU 5 Initializing CPU#5 CPU: > L1 I > > cache: > > > 32K, L1 D > > > > cache: > > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: > 12288K CPU > > 5/0x0 -> > > > Node 0 > > > > CPU: > > > > > Unsupported number of siblings 32 installing > Xen > > timer for > > > CPU 6 > > > > > Initializing CPU#6 CPU: L1 I cache: 32K, L1 > D > > cache: 32K > > > CPU: L2 > > > > cache: > > > > > 256K CPU: L3 cache: 12288K CPU 6/0x0 -> Node > 0 CPU: > > > Unsupported > > > > number > > > > > of siblings 32 installing Xen timer for CPU > 7 > > Initializing > > > CPU#7 > > > > CPU: L1 > > > > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: > 256K > > CPU: L3 > > > cache: > > > > 12288K > > > > > CPU 7/0x0 -> Node 0 CPU: Unsupported number > of > > siblings 32 > > > > installing > > > > > Xen timer for CPU 8 Initializing CPU#8 CPU: > L1 I > > cache: > > > 32K, L1 D > > > > cache: > > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: > 12288K CPU > > 8/0x0 -> > > > Node 0 > > > > CPU: > > > > > Unsupported number of siblings 32 installing > Xen > > timer for > > > CPU 9 > > > > > Initializing CPU#9 CPU: L1 I cache: 32K, L1 > D > > cache: 32K > > > CPU: L2 > > > > cache: > > > > > 256K CPU: L3 cache: 12288K CPU 9/0x0 -> Node > 0 CPU: > > > Unsupported > > > > number > > > > > of siblings 32 installing Xen timer for CPU > 10 > > > Initializing > > > > CPU#10 CPU: > > > > > L1 I cache: 32K, L1 D cache: 32K CPU: L2 > cache: > > 256K CPU: > > > L3 > > > > cache: > > > > > 12288K CPU 10/0x0 -> Node 0 CPU: Unsupported > number > > of > > > siblings > > > > 32 > > > > > installing Xen timer for CPU 11 Initializing > CPU#11 > > CPU: > > > L1 I > > > > cache: > > > > > 32K, L1 D cache: 32K CPU: L2 cache: 256K > CPU: L3 > > cache: > > > 12288K > > > > CPU > > > > > 11/0x0 -> Node 0 CPU: Unsupported number of > > siblings 32 > > > Brought > > > > up 12 > > > > > CPUs Grant table initialized regulator: core > > version 0.5 > > > Time: > > > > 14:45:00 > > > > > Date: 03/16/10 NET: Registered protocol > family 16 > > > > xenbus_probe_init ok > > > > > ACPI FADT declares the system doesn't > support PCIe > > ASPM, > > > so > > > > disable it > > > > > ACPI: bus type pci registered PCI: MCFG > > configuration 0: > > > base > > > > a0000000 > > > > > segment 0 buses 0 - 255 PCI: MCFG area at > a0000000 > > > reserved in > > > > E820 PCI: > > > > > Using MMCONFIG at a0000000 - afffffff PCI: > Using > > > configuration > > > > type 1 > > > > > for base access bio: create slab <bio-0> at > 0 ACPI > > Error: > > > Field > > > > [CPB3] > > > > > at 96 exceeds Buffer [NULL] size 64 (bits) > > > > (20090903/dsopcode-596) ACPI > > > > > Error (psparse-0537): Method parse/execution > failed > > > [\_SB_._OSC] > > > > (Node > > > > > ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI: > > Interpreter > > > enabled > > > > ACPI: > > > > > (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC > for > > interrupt > > > > routing ACPI > > > > > Warning: Incorrect checksum in table [ ] > - 97, > > should > > > be DB > > > > > (20090903/tbutils-314) ACPI: No dock devices > found. > > ACPI: > > > PCI > > > > Root > > > > > Bridge [PCI0] (0000:00) pci 0000:00:01.0: > PME# > > supported > > > from D0 > > > > D3hot > > > > > D3cold pci 0000:00:01.0: PME# disabled pci > > 0000:00:02.0: > > > PME# > > > > supported > > > > > from D0 D3hot D3cold pci 0000:00:02.0: PME# > > disabled pci > > > > 0000:00:03.0: > > > > > PME# supported from D0 D3hot D3cold pci > > 0000:00:03.0: PME# > > > > disabled pci > > > > > 0000:00:04.0: PME# supported from D0 D3hot > D3cold > > pci > > > > 0000:00:04.0: PME# > > > > > disabled pci 0000:00:05.0: PME# supported > from D0 > > D3hot > > > D3cold > > > > pci > > > > > 0000:00:05.0: PME# disabled pci > 0000:00:06.0: PME# > > > supported from > > > > D0 > > > > > D3hot D3cold pci 0000:00:06.0: PME# disabled > pci > > > 0000:00:07.0: > > > > PME# > > > > > supported from D0 D3hot D3cold pci > 0000:00:07.0: > > PME# > > > disabled > > > > pci > > > > > 0000:00:08.0: PME# supported from D0 D3hot > D3cold > > pci > > > > 0000:00:08.0: PME# > > > > > disabled pci 0000:00:09.0: PME# supported > from D0 > > D3hot > > > D3cold > > > > pci > > > > > 0000:00:09.0: PME# disabled pci > 0000:00:0a.0: PME# > > > supported from > > > > D0 > > > > > D3hot D3cold pci 0000:00:0a.0: PME# disabled > pci > > > 0000:00:13.0: > > > > PME# > > > > > supported from D0 D3hot D3cold pci > 0000:00:13.0: > > PME# > > > disabled > > > > pci > > > > > 0000:00:1a.7: PME# supported from D0 D3hot > D3cold > > pci > > > > 0000:00:1a.7: PME# > > > > > disabled pci 0000:00:1c.0: PME# supported > from D0 > > D3hot > > > D3cold > > > > pci > > > > > 0000:00:1c.0: PME# disabled pci > 0000:00:1c.4: PME# > > > supported from > > > > D0 > > > > > D3hot D3cold pci 0000:00:1c.4: PME# disabled > pci > > > 0000:00:1c.5: > > > > PME# > > > > > supported from D0 D3hot D3cold pci > 0000:00:1c.5: > > PME# > > > disabled > > > > pci > > > > > 0000:00:1d.7: PME# supported from D0 D3hot > D3cold > > pci > > > > 0000:00:1d.7: PME# > > > > > disabled pci 0000:00:1f.0: quirk: region > 0400-047f > > claimed > > > by > > > > ICH6 > > > > > ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: > region > > 0500-053f > > > claimed > > > > by ICH6 > > > > > GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO > decode 1 > > PIO at > > > 0680 > > > > (mask > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO > decode > > 2 PIO > > > at 0ca0 > > > > (mask > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO > decode > > 3 PIO > > > at 0600 > > > > (mask > > > > > 001f) pci 0000:00:1f.2: PME# supported from > D3hot > > pci > > > > 0000:00:1f.2: PME# > > > > > disabled pci 0000:01:00.0: PME# supported > from D0 > > D3hot > > > D3cold > > > > pci > > > > > 0000:01:00.0: PME# disabled pci > 0000:01:00.1: PME# > > > supported from > > > > D0 > > > > > D3hot D3cold pci 0000:01:00.1: PME# disabled > pci > > > 0000:0c:00.0: > > > > disabling > > > > > ASPM on pre-1.1 PCIe device. You can enable > it > > with > > > > 'pcie_aspm=force' > > > > > pci 0000:00:1e.0: transparent bridge ACPI: > PCI Root > > Bridge > > > [PCI1] > > > > > (0000:fe) ACPI: PCI Root Bridge [PCI2] > (0000:ff) > > ACPI: PCI > > > > Interrupt > > > > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 > 15) > > ACPI: PCI > > > > Interrupt Link > > > > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) > ACPI: PCI > > > Interrupt > > > > Link > > > > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) > ACPI: PCI > > > Interrupt > > > > Link > > > > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) > ACPI: PCI > > > Interrupt > > > > Link > > > > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, > > disabled. > > > ACPI: PCI > > > > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 > *11 12 > > 14 15) > > > ACPI: > > > > PCI > > > > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 > 11 12 14 > > 15) > > > *0, > > > > disabled. > > > > > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 > 6 7 9 > > *10 11 > > > 12 14 > > > > 15) > > > > > xenbus_probe_backend_init bus registered ok > > > > xenbus_probe_frontend_init > > > > > bus registered ok xen_balloon: Initialising > balloon > > driver > > > with > > > > page > > > > > order 0. vgaarb: device added: > > > > > > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none > > > vgaarb: > > > > loaded > > > > > SCSI subsystem initialized usbcore: > registered new > > > interface > > > > driver > > > > > usbfs usbcore: registered new interface > driver hub > > > usbcore: > > > > registered > > > > > new device driver usb PCI: Using ACPI for > IRQ > > routing > > > NetLabel: > > > > > Initializing NetLabel: domain hash size = > 128 > > NetLabel: > > > > protocols = > > > > > UNLABELED CIPSOv4 NetLabel: unlabeled > traffic > > allowed by > > > default > > > > > Switching to clocksource xen kstop/0 used > greatest > > stack > > > depth: > > > > 6568 > > > > > bytes left kstop/1 used greatest stack > depth: 6536 > > bytes > > > left > > > > pnp: PnP > > > > > ACPI init ACPI: bus type pnp registered > > xen_allocate_pirq: > > > > returning irq > > > > > 8 for gsi 8 Already setup the GSI :8 > > xen_allocate_pirq: > > > returning > > > > irq 13 > > > > > for gsi 13 Already setup the GSI :13 pnp: > PnP ACPI: > > found > > > 13 > > > > devices > > > > > ACPI: ACPI bus type pnp unregistered system > 00:07: > > ioport > > > range > > > > > 0x500-0x53f has been reserved system 00:07: > ioport > > range > > > > 0x400-0x47f has > > > > > been reserved system 00:07: ioport range > > 0x800-0x81f has > > > been > > > > reserved > > > > > system 00:07: ioport range 0x2f8-0x2ff has > been > > reserved > > > system > > > > 00:07: > > > > > iomem range 0xfed1c000-0xfed8bffe could not > be > > reserved > > > system > > > > 00:07: > > > > > iomem range 0xff000000-0xffffffff could not > be > > reserved > > > system > > > > 00:07: > > > > > iomem range 0xfee00000-0xfeefffff has been > reserved > > system > > > 00:07: > > > > iomem > > > > > range 0xfe900000-0xfe90001f has been > reserved > > system > > > 00:07: iomem > > > > range > > > > > 0xfea00000-0xfea0001f has been reserved > system > > 00:07: > > > iomem range > > > > > 0xfed1b000-0xfed1bfff has been reserved pci > > 0000:0c:00.0: > > > BAR 6: > > > > no > > > > > parent found for of device > [0xffff0000-0xffffffff] > > pci > > > > 0000:00:01.0: PCI > > > > > bridge, secondary bus 0000:01 pci > 0000:00:01.0: > > IO > > > window: > > > > > 0x1000-0x1fff pci 0000:00:01.0: MEM > window: > > > > 0xb1900000-0xb19fffff pci > > > > > 0000:00:01.0: PREFETCH window: disabled > pci > > > 0000:00:02.0: PCI > > > > bridge, > > > > > secondary bus 0000:02 pci 0000:00:02.0: IO > > window: > > > disabled pci > > > > > 0000:00:02.0: MEM window: disabled pci > > 0000:00:02.0: > > > PREFETCH > > > > > window: disabled pci 0000:00:03.0: PCI > bridge, > > secondary > > > bus > > > > 0000:03 pci > > > > > 0000:00:03.0: IO window: disabled pci > > 0000:00:03.0: > > > MEM > > > > window: > > > > > disabled pci 0000:00:03.0: PREFETCH > window: > > disabled pci > > > > 0000:00:04.0: > > > > > PCI bridge, secondary bus 0000:04 pci > 0000:00:04.0: > > IO > > > window: > > > > > disabled pci 0000:00:04.0: MEM window: > disabled > > pci > > > > 0000:00:04.0: > > > > > PREFETCH window: disabled pci 0000:00:05.0: > PCI > > bridge, > > > secondary > > > > bus > > > > > 0000:05 pci 0000:00:05.0: IO window: > disabled pci > > > 0000:00:05.0: > > > > MEM > > > > > window: disabled pci 0000:00:05.0: > PREFETCH > > window: > > > disabled > > > > pci > > > > > 0000:00:06.0: PCI bridge, secondary bus > 0000:06 pci > > > 0000:00:06.0: > > > > IO > > > > > window: disabled pci 0000:00:06.0: MEM > window: > > disabled > > > pci > > > > > 0000:00:06.0: PREFETCH window: disabled > pci > > > 0000:00:07.0: PCI > > > > bridge, > > > > > secondary bus 0000:07 pci 0000:00:07.0: IO > > window: > > > disabled pci > > > > > 0000:00:07.0: MEM window: disabled pci > > 0000:00:07.0: > > > PREFETCH > > > > > window: disabled pci 0000:00:08.0: PCI > bridge, > > secondary > > > bus > > > > 0000:08 pci > > > > > 0000:00:08.0: IO window: disabled pci > > 0000:00:08.0: > > > MEM > > > > window: > > > > > disabled pci 0000:00:08.0: PREFETCH > window: > > disabled pci > > > > 0000:00:09.0: > > > > > PCI bridge, secondary bus 0000:09 pci > 0000:00:09.0: > > IO > > > window: > > > > > 0x3000-0x3fff pci 0000:00:09.0: MEM > window: > > > > 0xb1b00000-0xb1cfffff pci > > > > > 0000:00:09.0: PREFETCH window: > > > > 0x000000b1d00000-0x000000b1efffff pci > > > > > 0000:00:0a.0: PCI bridge, secondary bus > 0000:0a pci > > > 0000:00:0a.0: > > > > IO > > > > > window: disabled pci 0000:00:0a.0: MEM > window: > > disabled > > > pci > > > > > 0000:00:0a.0: PREFETCH window: disabled > pci > > > 0000:00:1c.0: PCI > > > > bridge, > > > > > secondary bus 0000:0b pci 0000:00:1c.0: IO > > window: > > > disabled pci > > > > > 0000:00:1c.0: MEM window: disabled pci > > 0000:00:1c.0: > > > PREFETCH > > > > > window: disabled pci 0000:00:1c.4: PCI > bridge, > > secondary > > > bus > > > > 0000:0c pci > > > > > 0000:00:1c.4: IO window: disabled pci > > 0000:00:1c.4: > > > MEM > > > > window: > > > > > 0xb1000000-0xb18fffff pci 0000:00:1c.4: > PREFETCH > > window: > > > > > 0x000000b0000000-0x000000b0ffffff pci > 0000:00:1c.5: > > PCI > > > bridge, > > > > > secondary bus 0000:0d pci 0000:00:1c.5: IO > > window: > > > disabled pci > > > > > 0000:00:1c.5: MEM window: disabled pci > > 0000:00:1c.5: > > > PREFETCH > > > > > window: disabled pci 0000:00:1e.0: PCI > bridge, > > secondary > > > bus > > > > 0000:0e pci > > > > > 0000:00:1e.0: IO window: disabled pci > > 0000:00:1e.0: > > > MEM > > > > window: > > > > > disabled pci 0000:00:1e.0: PREFETCH > window: > > disabled pci > > > > 0000:00:01.0: > > > > > PCI INT A -> GSI 28 (level, low) -> IRQ 28 > pci > > > 0000:00:02.0: PCI > > > > INT A > > > > > -> GSI 29 (level, low) -> IRQ 29 pci > 0000:00:03.0: > > PCI INT > > > A -> > > > > GSI 24 > > > > > (level, low) -> IRQ 24 pci 0000:00:04.0: PCI > INT A > > -> GSI > > > 25 > > > > (level, > > > > > low) -> IRQ 25 pci 0000:00:05.0: PCI INT A > -> GSI > > 26 > > > (level, low) > > > > -> IRQ > > > > > 26 pci 0000:00:06.0: PCI INT A -> GSI 27 > (level, > > low) -> > > > IRQ 27 > > > > pci > > > > > 0000:00:07.0: PCI INT A -> GSI 30 (level, > low) -> > > IRQ 30 > > > pci > > > > > 0000:00:08.0: PCI INT A -> GSI 31 (level, > low) -> > > IRQ 31 > > > pci > > > > > 0000:00:09.0: PCI INT A -> GSI 32 (level, > low) -> > > IRQ 32 > > > pci > > > > > 0000:00:0a.0: PCI INT A -> GSI 33 (level, > low) -> > > IRQ 33 > > > pci > > > > > 0000:00:1c.0: PCI INT A -> GSI 16 (level, > low) -> > > IRQ 16 > > > > > xen_allocate_pirq: returning irq 16 for gsi > 16 > > Already > > > setup the > > > > GSI :16 > > > > > pci 0000:00:1c.4: PCI INT A -> GSI 16 > (level, low) > > -> IRQ > > > 16 pci > > > > > 0000:00:1c.5: PCI INT B -> GSI 17 (level, > low) -> > > IRQ 17 > > > NET: > > > > Registered > > > > > protocol family 2 IP route cache hash table > > entries: 65536 > > > > (order: 7, > > > > > 524288 bytes) TCP established hash table > entries: > > 262144 > > > (order: > > > > 10, > > > > > 4194304 bytes) TCP bind hash table entries: > 65536 > > (order: > > > 10, > > > > 4718592 > > > > > bytes) TCP: Hash tables configured > (established > > 262144 > > > bind > > > > 65536) TCP > > > > > reno registered NET: Registered protocol > family 1 > > pci > > > > 0000:01:00.0: > > > > > Disabling L0s pci 0000:01:00.1: Disabling > L0s > > Trying to > > > unpack > > > > rootfs > > > > > image as initramfs... Freeing initrd memory: > 6474k > > freed > > > DMA-API: > > > > > preallocated 32768 debug entries DMA-API: > debugging > > > enabled by > > > > kernel > > > > > config PCI-DMA: Using software bounce > buffering for > > IO > > > (SWIOTLB) > > > > DMA: > > > > > Placing 64MB software IO TLB between > > ffff880007525000 - > > > > ffff88000b525000 > > > > > DMA: software IO TLB at phys 0x7525000 - > 0xb525000 > > audit: > > > > initializing > > > > > netlink socket (disabled) type=2000 > > > audit(1268750702.035:1): > > > > initialized > > > > > HugeTLB registered 2 MB page size, > pre-allocated 0 > > pages > > > VFS: > > > > Disk > > > > > quotas dquot_6.5.2 Dquot-cache hash table > entries: > > 512 > > > (order 0, > > > > 4096 > > > > > bytes) msgmni has been set to 2970 > cryptomgr_test > > used > > > greatest > > > > stack > > > > > depth: 5864 bytes left cryptomgr_test used > greatest > > stack > > > depth: > > > > 5816 > > > > > bytes left alg: No test for stdrng (krng) > Block > > layer SCSI > > > > generic (bsg) > > > > > driver version 0.4 loaded (major 252) io > scheduler > > noop > > > > registered io > > > > > scheduler anticipatory registered io > scheduler > > deadline > > > > registered io > > > > > scheduler cfq registered (default) > pci_hotplug: PCI > > Hot > > > Plug PCI > > > > Core > > > > > version: 0.5 pciehp 0000:00:09.0:pcie04: HPC > > vendor_id > > > 8086 > > > > device_id > > > > > 3410 ss_vid 0 ss_did 0 pciehp: PCI Express > Hot Plug > > > Controller > > > > Driver > > > > > version: 0.4 acpiphp: ACPI Hot Plug PCI > Controller > > Driver > > > > version: 0.5 > > > > > acpiphp_glue: Slot 2 already registered by > another > > hotplug > > > driver > > > > > acpiphp_glue: Slot 2 already registered by > another > > hotplug > > > driver > > > > > acpiphp_glue: Slot 2 already registered by > another > > hotplug > > > driver > > > > > acpiphp_glue: Slot 2 already registered by > another > > hotplug > > > driver > > > > > acpiphp_glue: Slot 2 already registered by > another > > hotplug > > > driver > > > > > acpiphp_glue: Slot 2 already registered by > another > > hotplug > > > driver > > > > > acpiphp_glue: Slot 2 already registered by > another > > hotplug > > > driver > > > > > acpiphp_glue: Slot 2 already registered by > another > > hotplug > > > driver > > > > > pci-stub: invalid id string "" input: Sleep > Button > > as > > > > > > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 > > > ACPI: > > > > Sleep > > > > > Button [SLPB] input: Power Button as > > > > > > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: > > Power > > > Button > > > > [PWRF] > > > > > registering netback hpet_acpi_add: no > address or > > irqs in > > > _CRS > > > > > Non-volatile memory driver v1.3 Linux > agpgart > > interface > > > v0.103 > > > > Serial: > > > > > 8250/16550 driver, 4 ports, IRQ sharing > enabled > > > serial8250: ttyS1 > > > > at I/O > > > > > 0x2f8 (irq = 3) is a 16550A brd: module > loaded > > loop: > > > module > > > > loaded > > > > > input: Macintosh mouse button emulation as > > > > /devices/virtual/input/input2 > > > > > ahci 0000:00:1f.2: PCI INT A -> GSI 19 > (level, low) > > -> IRQ > > > 19 > > > > ahci > > > > > 0000:00:1f.2: AHCI 0001.0200 32 slots 6 > ports 3 > > Gbps 0x3f > > > impl > > > > SATA mode > > > > > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm > led clo > > pio > > > slum part > > > > ccc > > > > > ems scsi0 : ahci scsi1 : ahci scsi2 : ahci > scsi3 : > > ahci > > > scsi4 : > > > > ahci > > > > > scsi5 : ahci ata1: SATA max UDMA/133 > irq_stat > > 0x00400040, > > > > connection > > > > > status changed irq 2996 ata2: SATA max > UDMA/133 > > abar > > > > m2048@0xb1a00000 > > > > > port 0xb1a00180 irq 2996 ata3: SATA max > UDMA/133 > > abar > > > > m2048@0xb1a00000 > > > > > port 0xb1a00200 irq 2996 ata4: SATA max > UDMA/133 > > abar > > > > m2048@0xb1a00000 > > > > > port 0xb1a00280 irq 2996 ata5: SATA max > UDMA/133 > > abar > > > > m2048@0xb1a00000 > > > > > port 0xb1a00300 irq 2996 ata6: SATA max > UDMA/133 > > abar > > > > m2048@0xb1a00000 > > > > > port 0xb1a00380 irq 2996 Fixed MDIO Bus: > probed > > ehci_hcd: > > > USB 2.0 > > > > > 'Enhanced' Host Controller (EHCI) Driver > ehci_hcd > > > 0000:00:1a.7: > > > > PCI INT > > > > > C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd > > 0000:00:1a.7: > > > EHCI > > > > Host > > > > > Controller ehci_hcd 0000:00:1a.7: new USB > bus > > registered, > > > > assigned bus > > > > > number 1 ehci_hcd 0000:00:1a.7: debug port 1 > > ehci_hcd > > > > 0000:00:1a.7: irq > > > > > 18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7: > USB > > 2.0 > > > started, > > > > EHCI 1.00 > > > > > usb usb1: New USB device found, > idVendor=1d6b, > > > idProduct=0002 usb > > > > usb1: > > > > > New USB device strings: Mfr=3, Product=2, > > SerialNumber=1 > > > usb > > > > usb1: > > > > > Product: EHCI Host Controller usb usb1: > > Manufacturer: > > > Linux > > > > 2.6.32.9 > > > > > ehci_hcd usb usb1: SerialNumber: > 0000:00:1a.7 usb > > usb1: > > > > configuration #1 > > > > > chosen from 1 choice hub 1-0:1.0: USB hub > found hub > > > 1-0:1.0: 6 > > > > ports > > > > > detected ehci_hcd 0000:00:1d.7: PCI INT A -> > GSI 23 > > > (level, low) > > > > -> IRQ > > > > > 23 ehci_hcd 0000:00:1d.7: EHCI Host > Controller > > ehci_hcd > > > > 0000:00:1d.7: > > > > > new USB bus registered, assigned bus number > 2 > > ehci_hcd > > > > 0000:00:1d.7: > > > > > debug port 1 ehci_hcd 0000:00:1d.7: irq 23, > io mem > > > 0xb1a01000 > > > > ehci_hcd > > > > > 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb > usb2: > > New USB > > > device > > > > found, > > > > > idVendor=1d6b, idProduct=0002 usb usb2: New > USB > > device > > > strings: > > > > Mfr=3, > > > > > Product=2, SerialNumber=1 usb usb2: Product: > EHCI > > Host > > > Controller > > > > usb > > > > > usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd > usb > > usb2: > > > > SerialNumber: > > > > > 0000:00:1d.7 usb usb2: configuration #1 > chosen from > > 1 > > > choice hub > > > > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports > > detected > > > ohci_hcd: > > > > USB 1.1 > > > > > 'Open' Host Controller (OHCI) Driver > uhci_hcd: USB > > > Universal Host > > > > > Controller Interface driver > xen_allocate_pirq: > > returning > > > irq 16 > > > > for gsi > > > > > 16 Already setup the GSI :16 uhci_hcd > 0000:00:1a.0: > > PCI > > > INT A -> > > > > GSI 16 > > > > > (level, low) -> IRQ 16 uhci_hcd > 0000:00:1a.0: UHCI > > Host > > > > Controller > > > > > uhci_hcd 0000:00:1a.0: new USB bus > registered, > > assigned > > > bus > > > > number 3 > > > > > uhci_hcd 0000:00:1a.0: irq 16, io base > 0x000020e0 > > usb > > > usb3: New > > > > USB > > > > > device found, idVendor=1d6b, idProduct=0001 > usb > > usb3: New > > > USB > > > > device > > > > > strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: > > > Product: UHCI > > > > Host > > > > > Controller usb usb3: Manufacturer: Linux > 2.6.32.9 > > uhci_hcd > > > usb > > > > usb3: > > > > > SerialNumber: 0000:00:1a.0 usb usb3: > configuration > > #1 > > > chosen from > > > > 1 > > > > > choice hub 3-0:1.0: USB hub found hub > 3-0:1.0: 2 > > ports > > > detected > > > > uhci_hcd > > > > > 0000:00:1a.1: PCI INT B -> GSI 21 (level, > low) -> > > IRQ 21 > > > uhci_hcd > > > > > 0000:00:1a.1: UHCI Host Controller uhci_hcd > > 0000:00:1a.1: > > > new USB > > > > bus > > > > > registered, assigned bus number 4 uhci_hcd > > 0000:00:1a.1: > > > irq 21, > > > > io base > > > > > 0x000020c0 usb usb4: New USB device found, > > idVendor=1d6b, > > > > idProduct=0001 > > > > > usb usb4: New USB device strings: Mfr=3, > Product=2, > > > > SerialNumber=1 usb > > > > > usb4: Product: UHCI Host Controller usb > usb4: > > > Manufacturer: Linux > > > > > 2.6.32.9 uhci_hcd usb usb4: SerialNumber: > > 0000:00:1a.1 usb > > > usb4: > > > > > configuration #1 chosen from 1 choice hub > 4-0:1.0: > > USB hub > > > found > > > > hub > > > > > 4-0:1.0: 2 ports detected xen_allocate_pirq: > > returning irq > > > 19 for > > > > gsi 19 > > > > > Already setup the GSI :19 uhci_hcd > 0000:00:1a.2: > > PCI INT D > > > -> GSI > > > > 19 > > > > > (level, low) -> IRQ 19 uhci_hcd > 0000:00:1a.2: UHCI > > Host > > > > Controller > > > > > uhci_hcd 0000:00:1a.2: new USB bus > registered, > > assigned > > > bus > > > > number 5 > > > > > uhci_hcd 0000:00:1a.2: irq 19, io base > 0x000020a0 > > usb > > > usb5: New > > > > USB > > > > > device found, idVendor=1d6b, idProduct=0001 > usb > > usb5: New > > > USB > > > > device > > > > > strings: Mfr=3, Product=2, SerialNumber=1 > usb usb5: > > > Product: UHCI > > > > Host > > > > > Controller usb usb5: Manufacturer: Linux > 2.6.32.9 > > uhci_hcd > > > usb > > > > usb5: > > > > > SerialNumber: 0000:00:1a.2 usb usb5: > configuration > > #1 > > > chosen from > > > > 1 > > > > > choice hub 5-0:1.0: USB hub found hub > 5-0:1.0: 2 > > ports > > > detected > > > > > xen_allocate_pirq: returning irq 23 for gsi > 23 > > Already > > > setup the > > > > GSI :23 > > > > > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 > (level, > > low) -> > > > IRQ 23 > > > > > uhci_hcd 0000:00:1d.0: UHCI Host Controller > > uhci_hcd > > > > 0000:00:1d.0: new > > > > > USB bus registered, assigned bus number 6 > uhci_hcd > > > 0000:00:1d.0: > > > > irq 23, > > > > > io base 0x00002080 usb usb6: New USB device > found, > > > idVendor=1d6b, > > > > > idProduct=0001 usb usb6: New USB device > strings: > > Mfr=3, > > > > Product=2, > > > > > SerialNumber=1 usb usb6: Product: UHCI Host > > Controller usb > > > usb6: > > > > > Manufacturer: Linux 2.6.32.9 uhci_hcd usb > usb6: > > > SerialNumber: > > > > > 0000:00:1d.0 usb usb6: configuration #1 > chosen from > > 1 > > > choice hub > > > > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports > > detected > > > > xen_allocate_pirq: > > > > > returning irq 19 for gsi 19 Already setup > the GSI > > :19 > > > uhci_hcd > > > > > 0000:00:1d.1: PCI INT B -> GSI 19 (level, > low) -> > > IRQ 19 > > > uhci_hcd > > > > > 0000:00:1d.1: UHCI Host Controller uhci_hcd > > 0000:00:1d.1: > > > new USB > > > > bus > > > > > registered, assigned bus number 7 uhci_hcd > > 0000:00:1d.1: > > > irq 19, > > > > io base > > > > > 0x00002060 usb usb7: New USB device found, > > idVendor=1d6b, > > > > idProduct=0001 > > > > > usb usb7: New USB device strings: Mfr=3, > Product=2, > > > > SerialNumber=1 usb > > > > > usb7: Product: UHCI Host Controller usb > usb7: > > > Manufacturer: Linux > > > > > 2.6.32.9 uhci_hcd usb usb7: SerialNumber: > > 0000:00:1d.1 usb > > > usb7: > > > > > configuration #1 chosen from 1 choice hub > 7-0:1.0: > > USB hub > > > found > > > > hub > > > > > 7-0:1.0: 2 ports detected xen_allocate_pirq: > > returning irq > > > 18 for > > > > gsi 18 > > > > > Already setup the GSI :18 uhci_hcd > 0000:00:1d.2: > > PCI INT C > > > -> GSI > > > > 18 > > > > > (level, low) -> IRQ 18 uhci_hcd > 0000:00:1d.2: UHCI > > Host > > > > Controller > > > > > uhci_hcd 0000:00:1d.2: new USB bus > registered, > > assigned > > > bus > > > > number 8 > > > > > uhci_hcd 0000:00:1d.2: irq 18, io base > 0x00002040 > > usb > > > usb8: New > > > > USB > > > > > device found, idVendor=1d6b, idProduct=0001 > usb > > usb8: New > > > USB > > > > device > > > > > strings: Mfr=3, Product=2, SerialNumber=1 > usb usb8: > > > Product: UHCI > > > > Host > > > > > > > References > > > > Visible links > > 1. mailto:[20]pasik@iki.fi > > 2. mailto:[21]pasik@iki.fi > > 3. mailto:[22]pasik@iki.fi > > 4. mailto:[23]pasik@iki.fi > > 5. mailto:[24]pasik@iki.fi > > 6. > [25]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 7. > [26]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 8. mailto:[27]pasik@iki.fi > > 9. > [28]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 10. > [29]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 11. mailto:[30]pasik@iki.fi > > 12. mailto:[31]pasik@iki.fi > > 13. > [32]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 14. > [33]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 15. mailto:[34]pasik@iki.fi > > 16. > [35]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 17. > [36]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 18. mailto:[37]pasik@iki.fi > > References > > Visible links > 1. mailto:pasik@iki.fi > 2. mailto:pasik@iki.fi > 3. mailto:pasik@iki.fi > 4. mailto:pasik@iki.fi > 5. mailto:pasik@iki.fi > 6. mailto:pasik@iki.fi > 7. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 8. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 9. mailto:pasik@iki.fi > 10. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 11. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 12. mailto:pasik@iki.fi > 13. mailto:pasik@iki.fi > 14. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 15. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 16. mailto:pasik@iki.fi > 17. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 18. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 19. mailto:pasik@iki.fi > 20. mailto:pasik@iki.fi > 21. mailto:pasik@iki.fi > 22. mailto:pasik@iki.fi > 23. mailto:pasik@iki.fi > 24. mailto:pasik@iki.fi > 25. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 26. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 27. mailto:pasik@iki.fi > 28. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 29. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 30. mailto:pasik@iki.fi > 31. mailto:pasik@iki.fi > 32. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 33. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 34. mailto:pasik@iki.fi > 35. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 36. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 37. mailto:pasik@iki.fi ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-18 21:27 ` Pasi Kärkkäinen @ 2010-03-18 23:56 ` kishore kumar 2010-03-19 17:59 ` [Xen-devel] Re: pvops dom0 kernel: crash in print_all_ICs() Pasi Kärkkäinen 2010-03-23 15:23 ` Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 Tobias Geiger 1 sibling, 1 reply; 32+ messages in thread From: kishore kumar @ 2010-03-18 23:56 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users [-- Attachment #1.1: Type: text/plain, Size: 117648 bytes --] Attached is the capture log after changing the grub.conf to ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug swiotlb=force apic=debug loglevel=10 for the dom 0 kernel command line. On Thu, Mar 18, 2010 at 2:27 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote: > On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar wrote: > > pvdisplay does not work in my RHEL machine. > > > > I did pvscan. > > below is the output. > > > > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free] > > > > Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no VG: 0 [0 ] > > > > Ok so /dev/sda2 is the correct device holding the VolGroup01. > > Looking at your latest capture.doc I see this: > > Command line: ro root=/dev/vg00/lv01 console=hvc0 earlyprintk=xen > nomodeset initcall_debug debug swiotlb=force apic=debug loglevel=10 > > So your root= parameter is wrong! Edit grub.conf and replace it with the > actual root device: > root=/dev/VolGroup01/LogVol00 > > -- Pasi > > > On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen <[1]pasik@iki.fi> > wrote: > > > > On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore kumar wrote: > > > I did the below steps for pvops dom 0 kernel. > > > > > > make menuconfig > > > make bzImage > > > make modules > > > make modules_install > > > cp -a .config /boot/config-2.6.32.10 > > > cp -a System.map /boot/System.map-2.6.32.10 > > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10 > > > /sbin/mkinitrd -f --builtin=ahci /boot/initrd-2.6.32.10.img > > 2.6.32.10 > > > I tried root=/dev/VolGroup01/LogVol00 . > > > > > > > Ok. > > > > Please run "pvdisplay" to see which actual partition is the LVM PV > for > > your > > volume group. > > > > Also if you're running Fedora 12 you could try generating an initrd > > image > > with dracut instead of mkinitrd. > > > > -- Pasi > > > > > > > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen > > <[1][2]pasik@iki.fi> wrote: > > > > > > On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore kumar > wrote: > > > > Here is the output of df -h and cat /etc/fstab of my > > machine. > > > > > > > > > > Did you try both root=/dev/mapper/VolGroup01-LogVol00 and > > > root=/dev/VolGroup01/LogVol00 arguments for the dom0 kernel? > > > > > > How did you generate the initrd image for the dom0 kernel? > > > > > > Anyway this sounds like a grub.conf or initrd problem, not > Xen or > > pvops > > > dom0 kernel kernel problem. > > > > > > -- Pasi > > > > > > > Please let me know your thoughts. > > > > > > > > [root@localhost kishore]# df -h > > > > > > > > Filesystem Size Used Avail Use% Mounted on > > > > > > > > /dev/mapper/VolGroup01-LogVol00 > > > > > > > > 223G 29G 182G 14% / > > > > > > > > /dev/sda1 99M 81M 13M 87% /boot > > > > > > > > tmpfs 757M 0 757M 0% /dev/shm > > > > > > > > [root@localhost kishore]# cat /etc/fstab > > > > > > > > /dev/VolGroup01/LogVol00 / ext3 defaults 1 1 > > > > > > > > LABEL=/boot /boot ext3 defaults 1 2 > > > > > > > > tmpfs /dev/shm tmpfs defaults 0 0 > > > > > > > > devpts /dev/pts devpts gid=5,mode=620 0 0 > > > > > > > > sysfs /sys sysfs defaults 0 0 > > > > > > > > proc /proc proc defaults 0 0 > > > > > > > > /dev/VolGroup01/LogVol01 swap swap defaults 0 0 > > > > > > > > [root@localhost kishore]# > > > > > > > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen > > > <[1][2][3]pasik@iki.fi> wrote: > > > > > > > > On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore > kumar > > wrote: > > > > > I am not sure. Can you please let me know how to > > check > > > this? any > > > > command > > > > > ?? > > > > > > > > well simple "df -h" will show it. and also "cat > > /etc/fstab". > > > > You can also check it from your grub configuration.. > from > > the > > > working > > > > baremetal (non-Xen) entry. > > > > > > > > -- Pasi > > > > > > > > > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi Kärkkäinen > > > > <[1][2][3][4]pasik@iki.fi> wrote: > > > > > > > > > > On Tue, Mar 16, 2010 at 03:22:50PM -0700, > kishore > > kumar > > > wrote: > > > > > > attached is the log captured in with the > word > > > document . > > > > > > > > > > > > > > > > Scanning logical volumes > > > > > Reading all physical volumes. This may take a > > while... > > > > > Activating logical volumes > > > > > Volume group "VolGroup01" not found > > > > > Trying to resume from /dev/VolGroup01/LogVol01 > > > > > Unable to access resume device > > (/dev/VolGroup01/LogVol01) > > > > > Creating root device. > > > > > Mounting root filesystem. > > > > > mount: could not find filesystem '/dev/root' > > > > > Setting up other filesystems. > > > > > Setting up new root fs > > > > > setuproot: moving /dev failed: No such file or > > directory > > > > > no fstab.sys, mounting internal defaults > > > > > setuproot: error mounting /proc: No such file > or > > directory > > > > > setuproot: error mounting /sys: No such file or > > directory > > > > > Switching to new root and running init. > > > > > unmounting old /dev > > > > > unmounting old /proc > > > > > unmounting old /sys > > > > > switchroot: mount failed: No such file or > directory > > > > > init used greatest stack depth: 4088 bytes left > > > > > Kernel panic - not syncing: Attempted to kill > init! > > > > > > > > > > So it seems it gets all the way to executing > the > > initrd > > > image, > > > > > which then fails to mount the root fs. > > > > > > > > > > Earlier in the log: > > > > > ata1: SATA link up 3.0 Gbps (SStatus 123 > SControl > > 300) > > > > > ata1.00: ATA-8: Hitachi HDT721025SLA380, > STBOA3AA, > > max > > > UDMA/133 > > > > > ata1.00: 488397168 sectors, multi 0: LBA48 NCQ > > (depth > > > 31/32), AA > > > > > ata1.00: configured for UDMA/133 > > > > > scsi 0:0:0:0: Direct-Access ATA > Hitachi > > HDT72102 > > > STBO > > > > PQ: 0 > > > > > ANSI: 5 > > > > > sd 0:0:0:0: Attached scsi generic sg0 type 0 > > > > > sd 0:0:0:0: [sda] 488397168 512-byte logical > > blocks: (250 > > > GB/232 > > > > GiB) > > > > > sd 0:0:0:0: [sda] Write Protect is off > > > > > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > > > > sd 0:0:0:0: [sda] Write cache: enabled, read > cache: > > > enabled, > > > > doesn't > > > > > support DPO or FUA > > > > > sda: sda1 sda2 > > > > > sd 0:0:0:0: [sda] Attached SCSI disk > > > > > > > > > > so /dev/sda was detected. Is your root lvm > volume > > on > > > /dev/sda ? > > > > > Is /dev/VolGroup01/LogVol01 really your root > fs? > > > > > > > > > > -- Pasi > > > > > > > > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi > > Kärkkäinen > > > > > <[1][2][3][4][5]pasik@iki.fi> wrote: > > > > > > > > > > > > On Tue, Mar 16, 2010 at 02:56:06PM > -0700, > > kishore > > > kumar > > > > wrote: > > > > > > > Please find the attached log file > after > > fixing > > > the > > > > dom 0 > > > > > kernel cmd > > > > > > line > > > > > > > as below > > > > > > > > > > > > > > ro root=/dev/VolGroup01/LogVol00 > > console=hvc0 > > > > > earlyprintk=xen > > > > > > nomodeset > > > > > > > > > > > > > > > > > > > There's something wrong with the log, > the > > dom0 > > > kernel > > > > parts are > > > > > all on > > > > > > one line.. > > > > > > It's really difficult to read it. > > > > > > > > > > > > -- Pasi > > > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 2:29 PM, > Pasi > > > Kärkkäinen > > > > > > <[1][2][3][4][5][6]pasik@iki.fi> wrote: > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at > 02:16:22PM > > -0700, > > > kishore > > > > kumar > > > > > wrote: > > > > > > > > I did below steps. > > > > > > > > > > > > > > > > > > > > > > > > I pulled DOM 0 kernel from > > > > > > > > git clone > > > > > > > > > > > > > > > > > > > > > > > > > > > git://[1][2][3][4][5][6][7] > git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > > > linux-2.6-xen > > > > > > > > > > > > > > > > cd linux-2.6-xen > > > > > > > > > > > > > > > > make clean > > > > > > > > > > > > > > > > cp -a .config .config-old > > > > > > > > > > > > > > > > wget -O .config > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [2][3][4][5][6][7][8] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > > > > > > > > > make oldconfig > > > > > > > > > > > > > > > > make bzImage > > > > > > > > > > > > > > > > make modules > > > > > > > > > > > > > > > > make modules_install > > > > > > > > > > > > > > > > cp -a .config > > /boot/config-2.6.32.9 > > > > > > > > > > > > > > > > cp -a System.map > > > /boot/System.map-2.6.32.9 > > > > > > > > > > > > > > > > cp -a arch/x86/boot/bzImage > > > > /boot/vmlinuz-2.6.32.9 > > > > > > > > > > > > > > > > and modified the grub.conf > as > > below > > > > > > > > > > > > > > > > > > > > > > > > Root(hd0,0) > > > > > > > > > > > > > > > > kernel /xen.gz > console=vga,com1 > > > > com1=115200,8n1 > > > > > msi=1 > > > > > > iommu=1 > > > > > > > > > > > > > > > > module /vmlinuz-2.6.32.9 ro > > > > > root=/dev/VolGroup01/LogVo100 > > > > > > rhgb > > > > > > > quiet > > > > > > > > > > > > > > > > module /initrd-2.6.32.9.img > > > > > > > > > > > > > > > > > > > > > > > > and rebooted the machine. > Then > > It > > > booted with > > > > some > > > > > xen > > > > > > messages > > > > > > > and > > > > > > > > stopped. Those were the > > messages > > > captured > > > > from > > > > > serial > > > > > > console. > > > > > > > > > > > > > > > > Please let me know if I did > > something > > > wrong > > > > here. > > > > > > > > > > > > > > > > > > > > > > Please fix the kernel cmdline > based > > on my > > > earlier > > > > email, > > > > > and > > > > > > capture and > > > > > > > post the > > > > > > > serial console log again! > > > > > > > > > > > > > > -- Pasi > > > > > > > > > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 1:20 > PM, > > Pasi > > > > Kärkkäinen > > > > > > > <[3][4][5][6][7][8][9] > pasik@iki.fi> > > wrote: > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at > > 01:16:28PM > > > -0700, > > > > Jeremy > > > > > > Fitzhardinge > > > > > > > wrote: > > > > > > > > > On 03/16/2010 12:48 PM, > Pasi > > > Kärkkäinen > > > > wrote: > > > > > > > > >> On Tue, Mar 16, 2010 at > > 09:43:44PM > > > +0200, > > > > Pasi > > > > > > Kärkkäinen > > > > > > > wrote: > > > > > > > > >> > > > > > > > > >>> On Tue, Mar 16, 2010 > at > > > 10:32:17AM > > > > -0700, > > > > > kishore > > > > > > kumar > > > > > > > wrote: > > > > > > > > >>> > > > > > > > > >>>> Attached is the > > output > > > captured > > > > from > > > > > serial > > > > > > console. > > > > > > > > >>>> > > > > > > > > >>>> Machine does not > boot > > after > > > > compiling xen > > > > > 3.4.3 > > > > > > with > > > > > > > pv_ops dom > > > > > > > > 0 kernel. > > > > > > > > >>>> > > > > > > > > >>>> Please let me > know > > what is > > > going > > > > wrong > > > > > here. > > > > > > > > >>>> > > > > > > > > >>>> > > > > > > > > >>> Ok this looks like a > bug > > that is > > > already > > > > being > > > > > sorted > > > > > > out on > > > > > > > > xen-devel mailinglist. > > > > > > > > >>> I added CC to > xen-devel. > > > > > > > > >>> > > > > > > > > >>> > > > > > > > > >> > > > > > > > > > > > > > > > > > > Those messages are not a > > problem in > > > > themselves, > > > > > but the > > > > > > related > > > > > > > > problem > > > > > > > > > is believed to be fixed > in > > current > > > > > xen/stable-2.6.32.x. > > > > > > It > > > > > > > looks like > > > > > > > > > the output stops there > > because the > > > Xen > > > > console > > > > > isn't set > > > > > > up > > > > > > > properly > > > > > > > > for > > > > > > > > > some reason. > > > > > > > > > > > > > > > > > > > > > > > > > Yeah, remove "rhgb quiet" > from > > the > > > options.. > > > > the > > > > > dom0 > > > > > > kernel > > > > > > > cmdline > > > > > > > > should be like this: > > > > > > > > ro > > root=/dev/VolGroup01/LogVol00 > > > > console=hvc0 > > > > > > earlyprintk=xen > > > > > > > nomodeset > > > > > > > > -- Pasi > > > > > > > > > > > > > > > > References > > > > > > > > > > > > > > > > Visible links > > > > > > > > 1. > > > > > > > > > > > > > > > > > > > > [5][6][7][8][9][10] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > > > 2. > > > > > > > > > > > > > > > > > > > > > > > > > > > [6][7][8][9][10][11] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > 3. > > mailto:[7][8][9][10][11][12]pasik@iki.fi > > > > > > > > > > > > > > References > > > > > > > > > > > > > > Visible links > > > > > > > 1. > > mailto:[9][10][11][12][13]pasik@iki.fi > > > > > > > 2. > > > > > > > > > > > > > > > > > > > > [10][11][12][13][14] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > > 3. > > > > > > > > > > > > > > > > > > > > [11][12][13][14][15] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > 4. > > mailto:[12][13][14][15][16]pasik@iki.fi > > > > > > > 5. > > > > > > > > > > > > > > > > > > > > [13][14][15][16][17] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > > 6. > > > > > > > > > > > > > > > > > > > > [14][15][16][17][18] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > 7. > > mailto:[15][16][17][18][19]pasik@iki.fi > > > > > > > Asserting Post complete GPIO!!! > > > > > > > Transfer control to CSM 16-bit binary > for > > legacy > > > boot > > > > > > > __ __ _____ _ _ _____ > > > _ _ > > > > > > > \ \/ /___ _ __ |___ /| || | |___ / > > _ __ > > > ___| || | > > > > _ > > > > > __ _ > > > > > > __ ___ > > > > > > > \ // _ \ '_ \ |_ \| || |_ |_ \ > __| > > '__/ > > > __| || > > > > |_ __| > > > > > '_ \| > > > > > > '__/ _ \ > > > > > > > / \ __/ | | | ___) |__ _| ___) > |__| > > | | > > > (__|__ > > > > _|__| > > > > > |_) | | > > > > > > | __/ > > > > > > > /_/\_\___|_| |_| |____(_) |_|(_)____/ > > |_| > > > \___| |_| > > > > | > > > > > .__/|_| > > > > > > \___| > > > > > > > > > > > |_| > > > > > > > (XEN) Xen version 3.4.3-rc4-pre > > > (kishore@localdomain) > > > > (gcc > > > > > version > > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon > Mar > > 15 > > > 13:44:31 PDT > > > > 2010 > > > > > > > (XEN) Latest ChangeSet: Tue Mar 09 > > 18:15:52 2010 > > > +0000 > > > > > > 19924:6e72f8c3c017 > > > > > > > (XEN) Command line: console=vga,com1 > > > com1=115200,8n1 > > > > msi=1 > > > > > iommu=1 > > > > > > > (XEN) Video information: > > > > > > > (XEN) VGA is text mode 80x25, font > 8x16 > > > > > > > (XEN) VBE/DDC methods: none; EDID > > transfer time: > > > 0 > > > > seconds > > > > > > > (XEN) EDID info not retrieved because > no > > DDC > > > retrieval > > > > method > > > > > > detected > > > > > > > (XEN) Disc information: > > > > > > > (XEN) Found 1 MBR signatures > > > > > > > (XEN) Found 1 EDD information > structures > > > > > > > (XEN) Xen-e820 RAM map: > > > > > > > (XEN) 0000000000000000 - > 000000000009d000 > > > (usable) > > > > > > > (XEN) 000000000009d000 - > 00000000000a0000 > > > (reserved) > > > > > > > (XEN) 00000000000e0000 - > 0000000000100000 > > > (reserved) > > > > > > > (XEN) 0000000000100000 - > 000000006d597000 > > > (usable) > > > > > > > (XEN) 000000006d597000 - > 000000006d686000 > > > (reserved) > > > > > > > (XEN) 000000006d686000 - > 000000006f598000 > > > (usable) > > > > > > > (XEN) 000000006f598000 - > 000000006f59a000 > > > (reserved) > > > > > > > (XEN) 000000006f59a000 - > 000000006f5af000 > > (ACPI > > > NVS) > > > > > > > (XEN) 000000006f5af000 - > 000000006f5d9000 > > > (reserved) > > > > > > > (XEN) 000000006f5d9000 - > 000000006f5f9000 > > (ACPI > > > data) > > > > > > > (XEN) 000000006f5f9000 - > 000000006f6df000 > > (ACPI > > > NVS) > > > > > > > (XEN) 000000006f6df000 - > 000000006f700000 > > (ACPI > > > data) > > > > > > > (XEN) 000000006f700000 - > 0000000080000000 > > > (reserved) > > > > > > > (XEN) 00000000a0000000 - > 00000000b0000000 > > > (reserved) > > > > > > > (XEN) 00000000fc000000 - > 00000000fd000000 > > > (reserved) > > > > > > > (XEN) 00000000fed1c000 - > 00000000fed20000 > > > (reserved) > > > > > > > (XEN) 00000000ffc00000 - > 0000000100000000 > > > (reserved) > > > > > > > (XEN) System RAM: 1780MB (1823000kB) > > > > > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 > INTEL > > ) > > > > > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 > INTEL > > THRLY > > > > 0 > > > > > > 1000013) > > > > > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 > INTEL > > THRLY > > > > 0 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 > INTEL > > THRLY > > > > 3 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: FACS 6F5F9000, 0040 > > > > > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 > INTEL > > THRLY > > > > 0 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 > INTEL > > THRLY > > > > 1 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 > INTEL > > THRLY > > > > 1 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 > INTEL > > THRLY > > > > 1 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 > INTEL > > THRLY > > > > 0 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 > > INTEL SSDT > > > PM > > > > 4000 > > > > > INTL > > > > > > 20061109) > > > > > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 > INTEL > > THRLY > > > > 1 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) Domain heap initialised > > > > > > > (XEN) Processor #0 6:12 APIC version > 21 > > > > > > > (XEN) Processor #2 6:12 APIC version > 21 > > > > > > > (XEN) Processor #4 6:12 APIC version > 21 > > > > > > > (XEN) Processor #16 6:12 APIC version > 21 > > > > > > > (XEN) Processor #18 6:12 APIC version > 21 > > > > > > > (XEN) Processor #20 6:12 APIC version > 21 > > > > > > > (XEN) Processor #1 6:12 APIC version > 21 > > > > > > > (XEN) Processor #3 6:12 APIC version > 21 > > > > > > > (XEN) Processor #5 6:12 APIC version > 21 > > > > > > > (XEN) Processor #17 6:12 APIC version > 21 > > > > > > > (XEN) Processor #19 6:12 APIC version > 21 > > > > > > > (XEN) Processor #21 6:12 APIC version > 21 > > > > > > > (XEN) IOAPIC[0]: apic_id 8, version > 32, > > address > > > > 0xfec00000, GSI > > > > > 0-23 > > > > > > > (XEN) IOAPIC[1]: apic_id 9, version > 32, > > address > > > > 0xfec90000, GSI > > > > > 24-47 > > > > > > > (XEN) Enabling APIC mode: Phys. > Using 2 > > I/O > > > APICs > > > > > > > (XEN) Intel VT-d DMAR tables have been > > parsed. > > > > > > > (XEN) Using scheduler: SMP Credit > > Scheduler > > > (credit) > > > > > > > (XEN) Detected 3200.207 MHz processor. > > > > > > > (XEN) VMX: Supported advanced > features: > > > > > > > (XEN) - APIC MMIO access > virtualisation > > > > > > > (XEN) - APIC TPR shadow > > > > > > > (XEN) - Extended Page Tables (EPT) > > > > > > > (XEN) - Virtual-Processor Identifiers > > (VPID) > > > > > > > (XEN) - Virtual NMI > > > > > > > (XEN) - MSR direct-access bitmap > > > > > > > (XEN) VMX: EPT is available. > > > > > > > (XEN) VMX: VPID is available. > > > > > > > (XEN) HVM: VMX enabled > > > > > > > (XEN) HVM: Hardware Assisted Paging > > detected. > > > > > > > (XEN) CPU0: Intel Genuine Intel(R) CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 1/2 eip 88000 > > > > > > > (XEN) CPU1: Intel Genuine Intel(R) CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 2/4 eip 88000 > > > > > > > (XEN) CPU2: Intel Genuine Intel(R) CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 3/16 eip 88000 > > > > > > > (XEN) CPU3: Intel Genuine Intel(R) CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 4/18 eip 88000 > > > > > > > (XEN) CPU4: Intel Genuine Intel(R) CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 5/20 eip 88000 > > > > > > > (XEN) CPU5: Intel Genuine Intel(R) CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 6/1 eip 88000 > > > > > > > (XEN) CPU6: Intel Genuine Intel(R) CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 7/3 eip 88000 > > > > > > > (XEN) CPU7: Intel Genuine Intel(R) CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 8/5 eip 88000 > > > > > > > (XEN) CPU8: Intel Genuine Intel(R) CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 9/17 eip 88000 > > > > > > > (XEN) CPU9: Intel Genuine Intel(R) CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 10/19 eip > 88000 > > > > > > > (XEN) CPU10: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 11/21 eip > 88000 > > > > > > > (XEN) CPU11: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Total of 12 processors > activated. > > > > > > > (XEN) ENABLING IO-APIC IRQs > > > > > > > (XEN) -> Using new ACK method > > > > > > > (XEN) checking TSC synchronization > across > > 12 > > > CPUs: > > > > passed. > > > > > > > (XEN) Platform timer is 14.318MHz HPET > > > > > > > ?(XEN) Brought up 12 CPUs > > > > > > > (XEN) Intel VT-d Snoop Control > supported. > > > > > > > (XEN) Intel VT-d DMA Passthrough not > > supported. > > > > > > > (XEN) Intel VT-d Queued Invalidation > > supported. > > > > > > > (XEN) Intel VT-d Interrupt Remapping > > supported. > > > > > > > (XEN) I/O virtualisation enabled > > > > > > > (XEN) I/O virtualisation for PV guests > > disabled > > > > > > > (XEN) xenoprof: Initialization failed. > > Intel > > > processor > > > > model 44 > > > > > for P6 > > > > > > class family is not supported > > > > > > > (XEN) *** LOADING DOMAIN 0 *** > > > > > > > (XEN) Xen kernel: 64-bit, lsb, > compat32 > > > > > > > (XEN) Dom0 kernel: 64-bit, PAE, lsb, > > paddr > > > 0x1000000 -> > > > > > 0x26bb000 > > > > > > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > > > > > > (XEN) Dom0 alloc.: > > > 0000000064000000->0000000068000000 > > > > > (404490 pages > > > > > > to be allocated) > > > > > > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > > > > > > (XEN) Loaded kernel: > > > ffffffff81000000->ffffffff826bb000 > > > > > > > (XEN) Init. ramdisk: > > > ffffffff826bb000->ffffffff82d0d800 > > > > > > > (XEN) Phys-Mach map: > > > ffffffff82d0e000->ffffffff83044050 > > > > > > > (XEN) Start info: > > > ffffffff83045000->ffffffff830454b4 > > > > > > > (XEN) Page tables: > > > ffffffff83046000->ffffffff83063000 > > > > > > > (XEN) Boot stack: > > > ffffffff83063000->ffffffff83064000 > > > > > > > (XEN) TOTAL: > > > ffffffff80000000->ffffffff83400000 > > > > > > > (XEN) ENTRY ADDRESS: ffffffff819c1200 > > > > > > > (XEN) Dom0 has maximum 12 VCPUs > > > > > > > (XEN) Scrubbing Free RAM: .done. > > > > > > > (XEN) Xen trace buffers: disabled > > > > > > > (XEN) Std. Loglevel: Errors and > warnings > > > > > > > (XEN) Guest Loglevel: Nothing > > (Rate-limited: > > > Errors and > > > > > warnings) > > > > > > > (XEN) Xen is relinquishing VGA > console. > > > > > > > (XEN) *** Serial input -> DOM0 (type > > 'CTRL-a' > > > three > > > > times to > > > > > switch > > > > > > input to Xen) > > > > > > > (XEN) Freed 128kB init memory. > > > > > > > mapping kernel into physical memory > > > > > > > Xen: setup ISA identity maps > > > > > > > about to get started... > > > > > > > Initializing cgroup subsys cpuset > > > > > > > Initializing cgroup subsys cpu > > > > > > > Linux version 2.6.32.9 > > > (kishore@localhost.localdomain) > > > > (gcc > > > > > version > > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 > SMP > > Mon Mar > > > 15 > > > > 15:16:28 PDT > > > > > 2010 > > > > > > > Command line: ro > > root=/dev/VolGroup01/LogVol00 > > > > console=hvc0 > > > > > > earlyprintk=xen nomodeset > > > > > > > KERNEL supported cpus: > > > > > > > Intel GenuineIntel > > > > > > > AMD AuthenticAMD > > > > > > > Centaur CentaurHauls > > > > > > > BIOS-provided physical RAM map: > > > > > > > Xen: 0000000000000000 - > 000000000009d000 > > > (usable) > > > > > > > Xen: 000000000009d000 - > 0000000000100000 > > > (reserved) > > > > > > > Xen: 0000000000100000 - > 0000000066c0a000 > > > (usable) > > > > > > > Xen: 000000006d597000 - > 000000006d686000 > > > (reserved) > > > > > > > Xen: 000000006f598000 - > 000000006f59a000 > > > (reserved) > > > > > > > Xen: 000000006f59a000 - > 000000006f5af000 > > (ACPI > > > NVS) > > > > > > > Xen: 000000006f5af000 - > 000000006f5d9000 > > > (reserved) > > > > > > > Xen: 000000006f5d9000 - > 000000006f5f9000 > > (ACPI > > > data) > > > > > > > Xen: 000000006f5f9000 - > 000000006f6df000 > > (ACPI > > > NVS) > > > > > > > Xen: 000000006f6df000 - > 000000006f700000 > > (ACPI > > > data) > > > > > > > Xen: 000000006f700000 - > 0000000080000000 > > > (reserved) > > > > > > > Xen: 00000000a0000000 - > 00000000b0000000 > > > (reserved) > > > > > > > Xen: 00000000fc000000 - > 00000000fd000000 > > > (reserved) > > > > > > > Xen: 00000000fed1c000 - > 00000000fed20000 > > > (reserved) > > > > > > > Xen: 00000000ffc00000 - > 0000000100000000 > > > (reserved) > > > > > > > bootconsole [xenboot0] enabled > > > > > > > DMI 2.4 present. > > > > > > > last_pfn = 0x66c0a max_arch_pfn = > > 0x400000000 > > > > > > > init_memory_mapping: > > > 0000000000000000-0000000066c0a000 > > > > > > > RAMDISK: 026bb000 - 02d0d800 > > > > > > > ACPI: RSDP 00000000000f03f0 00024 (v02 > > INTEL ) > > > > > > > ACPI: XSDT 000000006f6fe120 00064 (v01 > > INTEL > > > THRLY > > > > 00000000 > > > > > > 01000013) > > > > > > > ACPI: FACP 000000006f6fd000 000F4 (v04 > > INTEL > > > THRLY > > > > 00000000 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: DSDT 000000006f6f5000 074F1 (v02 > > INTEL > > > THRLY > > > > 00000003 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: FACS 000000006f5f9000 00040 > > > > > > > ACPI: APIC 000000006f6f4000 001CC (v02 > > INTEL > > > THRLY > > > > 00000000 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: MCFG 000000006f6f3000 0003C (v01 > > INTEL > > > THRLY > > > > 00000001 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: HPET 000000006f6f2000 00038 (v01 > > INTEL > > > THRLY > > > > 00000001 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: SLIT 000000006f6f1000 00030 (v01 > > INTEL > > > THRLY > > > > 00000001 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: WDDT 000000006f6f0000 00040 (v01 > > INTEL > > > THRLY > > > > 00000000 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: SSDT 000000006f5d9000 1FDDC (v01 > > INTEL > > > SSDT PM > > > > 00004000 > > > > > INTL > > > > > > 20061109) > > > > > > > ACPI: 000000006f6ee000 001D0 (v01 > > INTEL > > > THRLY > > > > 00000001 > > > > > MSFT > > > > > > 0100000D) > > > > > > > No NUMA configuration found > > > > > > > Faking a node at > > > 0000000000000000-0000000066c0a000 > > > > > > > Bootmem setup node 0 > > > 0000000000000000-0000000066c0a000 > > > > > > > NODE_DATA [0000000000008000 - > > 000000000001ffff] > > > > > > > bootmap [0000000000020000 - > > 000000000002cd87] > > > pages d > > > > > > > (9 early reservations) ==> bootmem > > [0000000000 - > > > > 0066c0a000] > > > > > > > #0 [0000000000 - 0000001000] BIOS > data > > page > > > ==> > > > > [0000000000 > > > > > - > > > > > > 0000001000] > > > > > > > #1 [0003046000 - 0003063000] XEN > > PAGETABLES > > > ==> > > > > [0003046000 > > > > > - > > > > > > 0003063000] > > > > > > > #2 [0000006000 - 0000008000] > > TRAMPOLINE > > > ==> > > > > [0000006000 > > > > > - > > > > > > 0000008000] > > > > > > > #3 [0001000000 - 000269ae98] TEXT > > DATA BSS > > > ==> > > > > [0001000000 > > > > > - > > > > > > 000269ae98] > > > > > > > #4 [00026bb000 - 0002d0d800] > > RAMDISK > > > ==> > > > > [00026bb000 > > > > > - > > > > > > 0002d0d800] > > > > > > > #5 [0002d0e000 - 0003046000] XEN > START > > INFO > > > ==> > > > > [0002d0e000 > > > > > - > > > > > > 0003046000] > > > > > > > #6 [000269b000 - 000269b011] > > BRK > > > ==> > > > > [000269b000 > > > > > - > > > > > > 000269b011] > > > > > > > #7 [0000100000 - 000041a000] > > PGTABLE > > > ==> > > > > [0000100000 > > > > > - > > > > > > 000041a000] > > > > > > > #8 [0000001000 - 0000001030] > ACPI > > SLIT > > > ==> > > > > [0000001000 > > > > > - > > > > > > 0000001030] > > > > > > > found SMP MP-table at > [ffff8800000fd750] > > fd750 > > > > > > > Zone PFN ranges: > > > > > > > DMA 0x00000000 -> 0x00001000 > > > > > > > DMA32 0x00001000 -> 0x00100000 > > > > > > > Normal 0x00100000 -> 0x00100000 > > > > > > > Movable zone start PFN for each node > > > > > > > early_node_map[2] active PFN ranges > > > > > > > 0: 0x00000000 -> 0x0000009d > > > > > > > 0: 0x00000100 -> 0x00066c0a > > > > > > > ACPI: PM-Timer IO Port: 0x408 > > > > > > > ACPI: LAPIC (acpi_id[0x00] > lapic_id[0x00] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x01] > lapic_id[0x02] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x02] > lapic_id[0x04] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x03] > lapic_id[0x10] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x04] > lapic_id[0x12] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x05] > lapic_id[0x14] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x06] > lapic_id[0x01] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x07] > lapic_id[0x03] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x08] > lapic_id[0x05] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x09] > lapic_id[0x11] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x0a] > lapic_id[0x13] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x0b] > lapic_id[0x15] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x0c] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x0d] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x0e] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x0f] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x10] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x11] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x12] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x13] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x14] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x15] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x16] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x17] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x00] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x01] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x02] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x03] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x04] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x05] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x06] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x07] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x08] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x09] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x10] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x11] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x12] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x13] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x14] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x15] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x16] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x17] high > level > > > lint[0x1]) > > > > > > > ACPI: IOAPIC (id[0x08] > address[0xfec00000] > > > gsi_base[0]) > > > > > > > IOAPIC[0]: apic_id 8, version 0, > address > > > 0xfec00000, GSI > > > > 0-0 > > > > > > > ACPI: IOAPIC (id[0x09] > address[0xfec90000] > > > gsi_base[24]) > > > > > > > IOAPIC[1]: apic_id 9, version 0, > address > > > 0xfec90000, GSI > > > > 24-24 > > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 > > global_irq 2 > > > dfl dfl) > > > > > > > ERROR: Unable to locate IOAPIC for GSI > 2 > > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 > > global_irq 9 > > > high > > > > level) > > > > > > > ERROR: Unable to locate IOAPIC for GSI > 9 > > > > > > > Using ACPI (MADT) for SMP > configuration > > > information > > > > > > > ACPI: HPET id: 0x8086a401 base: > 0xfed00000 > > > > > > > SMP: Allowing 12 CPUs, 0 hotplug CPUs > > > > > > > PM: Registered nosave memory: > > 000000000009d000 - > > > > > 0000000000100000 > > > > > > > Allocating PCI resources starting at > > b0000000 > > > (gap: > > > > > b0000000:4c000000) > > > > > > > Booting paravirtualized kernel on Xen > > > > > > > Xen version: 3.4.3-rc4-pre > (preserve-AD) > > (dom0) > > > > > > > NR_CPUS:512 nr_cpumask_bits:512 > > nr_cpu_ids:12 > > > > nr_node_ids:1 > > > > > > > PERCPU: Embedded 478 pages/cpu > > @ffff880005ebc000 > > > > s1928024 r8192 > > > > > d21672 > > > > > > u1957888 > > > > > > > pcpu-alloc: s1928024 r8192 d21672 > u1957888 > > > > alloc=478*4096 > > > > > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] > 03 > > [0] 04 > > > [0] 05 > > > > [0] 06 > > > > > [0] 07 > > > > > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] > 11 > > > > > > > Xen: using vcpu_info placement > > > > > > > Built 1 zonelists in Node order, > mobility > > > grouping on. > > > > Total > > > > > pages: > > > > > > 409291 > > > > > > > Policy zone: DMA32 > > > > > > > Kernel command line: ro > > > root=/dev/VolGroup01/LogVol00 > > > > > console=hvc0 > > > > > > earlyprintk=xen nomodeset > > > > > > > PID hash table entries: 4096 (order: > 3, > > 32768 > > > bytes) > > > > > > > Initializing CPU#0 > > > > > > > DMA: Placing 64MB software IO TLB > between > > > > ffff880007525000 - > > > > > > ffff88000b525000 > > > > > > > DMA: software IO TLB at phys 0x7525000 > - > > > 0xb525000 > > > > > > > xen_swiotlb_fixup: > buf=ffff880007525000 > > > size=67108864 > > > > > > > xen_swiotlb_fixup: > buf=ffff88000b585000 > > > size=32768 > > > > > > > Memory: 1514268k/1683496k available > (4654k > > kernel > > > code, > > > > 396k > > > > > absent, > > > > > > 168832k reserved, 3443k data, 3396k > init) > > > > > > > SLUB: Genslabs=14, HWalign=64, > Order=0-3, > > > MinObjects=0, > > > > > CPUs=12, > > > > > > Nodes=1 > > > > > > > Hierarchical RCU implementation. > > > > > > > NR_IRQS:4352 nr_irqs:3072 > > > > > > > Already setup the GSI :0 > > > > > > > Already setup the GSI :1 > > > > > > > Already setup the GSI :2 > > > > > > > Already setup the GSI :3 > > > > > > > Already setup the GSI :4 > > > > > > > Already setup the GSI :5 > > > > > > > Already setup the GSI :6 > > > > > > > Already setup the GSI :7 > > > > > > > Already setup the GSI :8 > > > > > > > Already setup the GSI :9 > > > > > > > Already setup the GSI :10 > > > > > > > Already setup the GSI :11 > > > > > > > Already setup the GSI :12 > > > > > > > Already setup the GSI :13 > > > > > > > Already setup the GSI :14 > > > > > > > Already setup the GSI :15 > > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 > > global_irq 2 > > > dfl dfl) > > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 > > global_irq 9 > > > high > > > > level) > > > > > > > xen: sci override: source_irq=9 > > global_irq=9 > > > trigger=c > > > > > polarity=1 > > > > > > > xen_allocate_pirq: returning irq 9 for > gsi > > 9 > > > > > > > Already setup the GSI :9 > > > > > > > xen: acpi sci 9 > > > > > > > Console: colour VGA+ 80x25 > > > > > > > console [hvc0] enabled, bootconsole > > disabled > > > console > > > > [hvc0] > > > > > enabled, > > > > > > bootconsole disabled > > > > > > > Lock dependency validator: Copyright > (c) > > 2006 Red > > > Hat, > > > > Inc., > > > > > Ingo > > > > > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 > ... > > > MAX_LOCK_DEPTH: > > > > > 48 > > > > > > ... MAX_LOCKDEP_KEYS: 8191 ... > > > CLASSHASH_SIZE: > > > > > 4096 ... > > > > > > MAX_LOCKDEP_ENTRIES: 16384 ... > > > MAX_LOCKDEP_CHAINS: > > > > 32768 > > > > > ... > > > > > > CHAINHASH_SIZE: 16384 memory > used > > by lock > > > > dependency > > > > > info: > > > > > > 6367 kB per task-struct memory > footprint: > > 2688 > > > bytes > > > > allocated > > > > > 17039360 > > > > > > bytes of page_cgroup please try > > > 'cgroup_disable=memory' > > > > option if > > > > > you > > > > > > don't want memory cgroups installing Xen > > timer for > > > CPU 0 > > > > Detected > > > > > > 3200.206 MHz processor. Calibrating > delay > > loop > > > (skipped), > > > > value > > > > > > calculated using timer frequency.. > 6400.41 > > BogoMIPS > > > > (lpj=3200206) > > > > > > Security Framework initialized SELinux: > > > Initializing. > > > > Dentry > > > > > cache hash > > > > > > table entries: 262144 (order: 9, 2097152 > > bytes) > > > > Inode-cache hash > > > > > table > > > > > > entries: 131072 (order: 8, 1048576 > bytes) > > > Mount-cache hash > > > > table > > > > > > entries: 256 Initializing cgroup subsys > ns > > > Initializing > > > > cgroup > > > > > subsys > > > > > > cpuacct Initializing cgroup subsys > memory > > > Initializing > > > > cgroup > > > > > subsys > > > > > > devices Initializing cgroup subsys > freezer > > > Initializing > > > > cgroup > > > > > subsys > > > > > > net_cls CPU: L1 I cache: 32K, L1 D > cache: > > 32K CPU: > > > L2 > > > > cache: 256K > > > > > CPU: > > > > > > L3 cache: 12288K CPU 0/0x0 -> Node 0 > CPU: > > > Unsupported > > > > number of > > > > > siblings > > > > > > 32 Performance Events: unsupported p6 > CPU > > model 44 > > > no PMU > > > > driver, > > > > > > software events only. lockdep: fixing up > > > alternatives. SMP > > > > > alternatives: > > > > > > switching to UP code ACPI: Core revision > > 20090903 > > > ftrace: > > > > > converting > > > > > > mcount calls to 0f 1f 44 00 00 ftrace: > > allocating > > > 27971 > > > > entries > > > > > in 110 > > > > > > pages installing Xen timer for CPU 1 > > lockdep: > > > fixing up > > > > > alternatives. > > > > > > SMP alternatives: switching to SMP code > > > Initializing CPU#1 > > > > CPU: > > > > > L1 I > > > > > > cache: 32K, L1 D cache: 32K CPU: L2 > cache: > > 256K > > > CPU: L3 > > > > cache: > > > > > 12288K > > > > > > CPU 1/0x0 -> Node 0 CPU: Unsupported > number > > of > > > siblings 32 > > > > > installing > > > > > > Xen timer for CPU 2 Initializing CPU#2 > CPU: > > L1 I > > > cache: > > > > 32K, L1 D > > > > > cache: > > > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: > > 12288K CPU > > > 2/0x0 -> > > > > Node 0 > > > > > CPU: > > > > > > Unsupported number of siblings 32 > installing > > Xen > > > timer for > > > > CPU 3 > > > > > > Initializing CPU#3 CPU: L1 I cache: 32K, > L1 > > D > > > cache: 32K > > > > CPU: L2 > > > > > cache: > > > > > > 256K CPU: L3 cache: 12288K CPU 3/0x0 -> > Node > > 0 CPU: > > > > Unsupported > > > > > number > > > > > > of siblings 32 installing Xen timer for > CPU > > 4 > > > Initializing > > > > CPU#4 > > > > > CPU: L1 > > > > > > I cache: 32K, L1 D cache: 32K CPU: L2 > cache: > > 256K > > > CPU: L3 > > > > cache: > > > > > 12288K > > > > > > CPU 4/0x0 -> Node 0 CPU: Unsupported > number > > of > > > siblings 32 > > > > > installing > > > > > > Xen timer for CPU 5 Initializing CPU#5 > CPU: > > L1 I > > > cache: > > > > 32K, L1 D > > > > > cache: > > > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: > > 12288K CPU > > > 5/0x0 -> > > > > Node 0 > > > > > CPU: > > > > > > Unsupported number of siblings 32 > installing > > Xen > > > timer for > > > > CPU 6 > > > > > > Initializing CPU#6 CPU: L1 I cache: 32K, > L1 > > D > > > cache: 32K > > > > CPU: L2 > > > > > cache: > > > > > > 256K CPU: L3 cache: 12288K CPU 6/0x0 -> > Node > > 0 CPU: > > > > Unsupported > > > > > number > > > > > > of siblings 32 installing Xen timer for > CPU > > 7 > > > Initializing > > > > CPU#7 > > > > > CPU: L1 > > > > > > I cache: 32K, L1 D cache: 32K CPU: L2 > cache: > > 256K > > > CPU: L3 > > > > cache: > > > > > 12288K > > > > > > CPU 7/0x0 -> Node 0 CPU: Unsupported > number > > of > > > siblings 32 > > > > > installing > > > > > > Xen timer for CPU 8 Initializing CPU#8 > CPU: > > L1 I > > > cache: > > > > 32K, L1 D > > > > > cache: > > > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: > > 12288K CPU > > > 8/0x0 -> > > > > Node 0 > > > > > CPU: > > > > > > Unsupported number of siblings 32 > installing > > Xen > > > timer for > > > > CPU 9 > > > > > > Initializing CPU#9 CPU: L1 I cache: 32K, > L1 > > D > > > cache: 32K > > > > CPU: L2 > > > > > cache: > > > > > > 256K CPU: L3 cache: 12288K CPU 9/0x0 -> > Node > > 0 CPU: > > > > Unsupported > > > > > number > > > > > > of siblings 32 installing Xen timer for > CPU > > 10 > > > > Initializing > > > > > CPU#10 CPU: > > > > > > L1 I cache: 32K, L1 D cache: 32K CPU: L2 > > cache: > > > 256K CPU: > > > > L3 > > > > > cache: > > > > > > 12288K CPU 10/0x0 -> Node 0 CPU: > Unsupported > > number > > > of > > > > siblings > > > > > 32 > > > > > > installing Xen timer for CPU 11 > Initializing > > CPU#11 > > > CPU: > > > > L1 I > > > > > cache: > > > > > > 32K, L1 D cache: 32K CPU: L2 cache: 256K > > CPU: L3 > > > cache: > > > > 12288K > > > > > CPU > > > > > > 11/0x0 -> Node 0 CPU: Unsupported number > of > > > siblings 32 > > > > Brought > > > > > up 12 > > > > > > CPUs Grant table initialized regulator: > core > > > version 0.5 > > > > Time: > > > > > 14:45:00 > > > > > > Date: 03/16/10 NET: Registered protocol > > family 16 > > > > > xenbus_probe_init ok > > > > > > ACPI FADT declares the system doesn't > > support PCIe > > > ASPM, > > > > so > > > > > disable it > > > > > > ACPI: bus type pci registered PCI: MCFG > > > configuration 0: > > > > base > > > > > a0000000 > > > > > > segment 0 buses 0 - 255 PCI: MCFG area > at > > a0000000 > > > > reserved in > > > > > E820 PCI: > > > > > > Using MMCONFIG at a0000000 - afffffff > PCI: > > Using > > > > configuration > > > > > type 1 > > > > > > for base access bio: create slab <bio-0> > at > > 0 ACPI > > > Error: > > > > Field > > > > > [CPB3] > > > > > > at 96 exceeds Buffer [NULL] size 64 > (bits) > > > > > (20090903/dsopcode-596) ACPI > > > > > > Error (psparse-0537): Method > parse/execution > > failed > > > > [\_SB_._OSC] > > > > > (Node > > > > > > ffff880064e00c98), AE_AML_BUFFER_LIMIT > ACPI: > > > Interpreter > > > > enabled > > > > > ACPI: > > > > > > (supports S0 S1 S3 S4 S5) ACPI: Using > IOAPIC > > for > > > interrupt > > > > > routing ACPI > > > > > > Warning: Incorrect checksum in table [ > ] > > - 97, > > > should > > > > be DB > > > > > > (20090903/tbutils-314) ACPI: No dock > devices > > found. > > > ACPI: > > > > PCI > > > > > Root > > > > > > Bridge [PCI0] (0000:00) pci > 0000:00:01.0: > > PME# > > > supported > > > > from D0 > > > > > D3hot > > > > > > D3cold pci 0000:00:01.0: PME# disabled > pci > > > 0000:00:02.0: > > > > PME# > > > > > supported > > > > > > from D0 D3hot D3cold pci 0000:00:02.0: > PME# > > > disabled pci > > > > > 0000:00:03.0: > > > > > > PME# supported from D0 D3hot D3cold pci > > > 0000:00:03.0: PME# > > > > > disabled pci > > > > > > 0000:00:04.0: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > > 0000:00:04.0: PME# > > > > > > disabled pci 0000:00:05.0: PME# > supported > > from D0 > > > D3hot > > > > D3cold > > > > > pci > > > > > > 0000:00:05.0: PME# disabled pci > > 0000:00:06.0: PME# > > > > supported from > > > > > D0 > > > > > > D3hot D3cold pci 0000:00:06.0: PME# > disabled > > pci > > > > 0000:00:07.0: > > > > > PME# > > > > > > supported from D0 D3hot D3cold pci > > 0000:00:07.0: > > > PME# > > > > disabled > > > > > pci > > > > > > 0000:00:08.0: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > > 0000:00:08.0: PME# > > > > > > disabled pci 0000:00:09.0: PME# > supported > > from D0 > > > D3hot > > > > D3cold > > > > > pci > > > > > > 0000:00:09.0: PME# disabled pci > > 0000:00:0a.0: PME# > > > > supported from > > > > > D0 > > > > > > D3hot D3cold pci 0000:00:0a.0: PME# > disabled > > pci > > > > 0000:00:13.0: > > > > > PME# > > > > > > supported from D0 D3hot D3cold pci > > 0000:00:13.0: > > > PME# > > > > disabled > > > > > pci > > > > > > 0000:00:1a.7: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > > 0000:00:1a.7: PME# > > > > > > disabled pci 0000:00:1c.0: PME# > supported > > from D0 > > > D3hot > > > > D3cold > > > > > pci > > > > > > 0000:00:1c.0: PME# disabled pci > > 0000:00:1c.4: PME# > > > > supported from > > > > > D0 > > > > > > D3hot D3cold pci 0000:00:1c.4: PME# > disabled > > pci > > > > 0000:00:1c.5: > > > > > PME# > > > > > > supported from D0 D3hot D3cold pci > > 0000:00:1c.5: > > > PME# > > > > disabled > > > > > pci > > > > > > 0000:00:1d.7: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > > 0000:00:1d.7: PME# > > > > > > disabled pci 0000:00:1f.0: quirk: region > > 0400-047f > > > claimed > > > > by > > > > > ICH6 > > > > > > ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: > > region > > > 0500-053f > > > > claimed > > > > > by ICH6 > > > > > > GPIO pci 0000:00:1f.0: ICH7 LPC Generic > IO > > decode 1 > > > PIO at > > > > 0680 > > > > > (mask > > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic > IO > > decode > > > 2 PIO > > > > at 0ca0 > > > > > (mask > > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic > IO > > decode > > > 3 PIO > > > > at 0600 > > > > > (mask > > > > > > 001f) pci 0000:00:1f.2: PME# supported > from > > D3hot > > > pci > > > > > 0000:00:1f.2: PME# > > > > > > disabled pci 0000:01:00.0: PME# > supported > > from D0 > > > D3hot > > > > D3cold > > > > > pci > > > > > > 0000:01:00.0: PME# disabled pci > > 0000:01:00.1: PME# > > > > supported from > > > > > D0 > > > > > > D3hot D3cold pci 0000:01:00.1: PME# > disabled > > pci > > > > 0000:0c:00.0: > > > > > disabling > > > > > > ASPM on pre-1.1 PCIe device. You can > enable > > it > > > with > > > > > 'pcie_aspm=force' > > > > > > pci 0000:00:1e.0: transparent bridge > ACPI: > > PCI Root > > > Bridge > > > > [PCI1] > > > > > > (0000:fe) ACPI: PCI Root Bridge [PCI2] > > (0000:ff) > > > ACPI: PCI > > > > > Interrupt > > > > > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 > 14 > > 15) > > > ACPI: PCI > > > > > Interrupt Link > > > > > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 > 15) > > ACPI: PCI > > > > Interrupt > > > > > Link > > > > > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 > 15) > > ACPI: PCI > > > > Interrupt > > > > > Link > > > > > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 > 15) > > ACPI: PCI > > > > Interrupt > > > > > Link > > > > > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) > *0, > > > disabled. > > > > ACPI: PCI > > > > > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 > 10 > > *11 12 > > > 14 15) > > > > ACPI: > > > > > PCI > > > > > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 > 10 > > 11 12 14 > > > 15) > > > > *0, > > > > > disabled. > > > > > > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 > 4 5 > > 6 7 9 > > > *10 11 > > > > 12 14 > > > > > 15) > > > > > > xenbus_probe_backend_init bus registered > ok > > > > > xenbus_probe_frontend_init > > > > > > bus registered ok xen_balloon: > Initialising > > balloon > > > driver > > > > with > > > > > page > > > > > > order 0. vgaarb: device added: > > > > > > > > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none > > > > vgaarb: > > > > > loaded > > > > > > SCSI subsystem initialized usbcore: > > registered new > > > > interface > > > > > driver > > > > > > usbfs usbcore: registered new interface > > driver hub > > > > usbcore: > > > > > registered > > > > > > new device driver usb PCI: Using ACPI > for > > IRQ > > > routing > > > > NetLabel: > > > > > > Initializing NetLabel: domain hash size > = > > 128 > > > NetLabel: > > > > > protocols = > > > > > > UNLABELED CIPSOv4 NetLabel: unlabeled > > traffic > > > allowed by > > > > default > > > > > > Switching to clocksource xen kstop/0 > used > > greatest > > > stack > > > > depth: > > > > > 6568 > > > > > > bytes left kstop/1 used greatest stack > > depth: 6536 > > > bytes > > > > left > > > > > pnp: PnP > > > > > > ACPI init ACPI: bus type pnp registered > > > xen_allocate_pirq: > > > > > returning irq > > > > > > 8 for gsi 8 Already setup the GSI :8 > > > xen_allocate_pirq: > > > > returning > > > > > irq 13 > > > > > > for gsi 13 Already setup the GSI :13 > pnp: > > PnP ACPI: > > > found > > > > 13 > > > > > devices > > > > > > ACPI: ACPI bus type pnp unregistered > system > > 00:07: > > > ioport > > > > range > > > > > > 0x500-0x53f has been reserved system > 00:07: > > ioport > > > range > > > > > 0x400-0x47f has > > > > > > been reserved system 00:07: ioport range > > > 0x800-0x81f has > > > > been > > > > > reserved > > > > > > system 00:07: ioport range 0x2f8-0x2ff > has > > been > > > reserved > > > > system > > > > > 00:07: > > > > > > iomem range 0xfed1c000-0xfed8bffe could > not > > be > > > reserved > > > > system > > > > > 00:07: > > > > > > iomem range 0xff000000-0xffffffff could > not > > be > > > reserved > > > > system > > > > > 00:07: > > > > > > iomem range 0xfee00000-0xfeefffff has > been > > reserved > > > system > > > > 00:07: > > > > > iomem > > > > > > range 0xfe900000-0xfe90001f has been > > reserved > > > system > > > > 00:07: iomem > > > > > range > > > > > > 0xfea00000-0xfea0001f has been reserved > > system > > > 00:07: > > > > iomem range > > > > > > 0xfed1b000-0xfed1bfff has been reserved > pci > > > 0000:0c:00.0: > > > > BAR 6: > > > > > no > > > > > > parent found for of device > > [0xffff0000-0xffffffff] > > > pci > > > > > 0000:00:01.0: PCI > > > > > > bridge, secondary bus 0000:01 pci > > 0000:00:01.0: > > > IO > > > > window: > > > > > > 0x1000-0x1fff pci 0000:00:01.0: MEM > > window: > > > > > 0xb1900000-0xb19fffff pci > > > > > > 0000:00:01.0: PREFETCH window: > disabled > > pci > > > > 0000:00:02.0: PCI > > > > > bridge, > > > > > > secondary bus 0000:02 pci 0000:00:02.0: > IO > > > window: > > > > disabled pci > > > > > > 0000:00:02.0: MEM window: disabled pci > > > 0000:00:02.0: > > > > PREFETCH > > > > > > window: disabled pci 0000:00:03.0: PCI > > bridge, > > > secondary > > > > bus > > > > > 0000:03 pci > > > > > > 0000:00:03.0: IO window: disabled pci > > > 0000:00:03.0: > > > > MEM > > > > > window: > > > > > > disabled pci 0000:00:03.0: PREFETCH > > window: > > > disabled pci > > > > > 0000:00:04.0: > > > > > > PCI bridge, secondary bus 0000:04 pci > > 0000:00:04.0: > > > IO > > > > window: > > > > > > disabled pci 0000:00:04.0: MEM window: > > disabled > > > pci > > > > > 0000:00:04.0: > > > > > > PREFETCH window: disabled pci > 0000:00:05.0: > > PCI > > > bridge, > > > > secondary > > > > > bus > > > > > > 0000:05 pci 0000:00:05.0: IO window: > > disabled pci > > > > 0000:00:05.0: > > > > > MEM > > > > > > window: disabled pci 0000:00:05.0: > > PREFETCH > > > window: > > > > disabled > > > > > pci > > > > > > 0000:00:06.0: PCI bridge, secondary bus > > 0000:06 pci > > > > 0000:00:06.0: > > > > > IO > > > > > > window: disabled pci 0000:00:06.0: MEM > > window: > > > disabled > > > > pci > > > > > > 0000:00:06.0: PREFETCH window: > disabled > > pci > > > > 0000:00:07.0: PCI > > > > > bridge, > > > > > > secondary bus 0000:07 pci 0000:00:07.0: > IO > > > window: > > > > disabled pci > > > > > > 0000:00:07.0: MEM window: disabled pci > > > 0000:00:07.0: > > > > PREFETCH > > > > > > window: disabled pci 0000:00:08.0: PCI > > bridge, > > > secondary > > > > bus > > > > > 0000:08 pci > > > > > > 0000:00:08.0: IO window: disabled pci > > > 0000:00:08.0: > > > > MEM > > > > > window: > > > > > > disabled pci 0000:00:08.0: PREFETCH > > window: > > > disabled pci > > > > > 0000:00:09.0: > > > > > > PCI bridge, secondary bus 0000:09 pci > > 0000:00:09.0: > > > IO > > > > window: > > > > > > 0x3000-0x3fff pci 0000:00:09.0: MEM > > window: > > > > > 0xb1b00000-0xb1cfffff pci > > > > > > 0000:00:09.0: PREFETCH window: > > > > > 0x000000b1d00000-0x000000b1efffff pci > > > > > > 0000:00:0a.0: PCI bridge, secondary bus > > 0000:0a pci > > > > 0000:00:0a.0: > > > > > IO > > > > > > window: disabled pci 0000:00:0a.0: MEM > > window: > > > disabled > > > > pci > > > > > > 0000:00:0a.0: PREFETCH window: > disabled > > pci > > > > 0000:00:1c.0: PCI > > > > > bridge, > > > > > > secondary bus 0000:0b pci 0000:00:1c.0: > IO > > > window: > > > > disabled pci > > > > > > 0000:00:1c.0: MEM window: disabled pci > > > 0000:00:1c.0: > > > > PREFETCH > > > > > > window: disabled pci 0000:00:1c.4: PCI > > bridge, > > > secondary > > > > bus > > > > > 0000:0c pci > > > > > > 0000:00:1c.4: IO window: disabled pci > > > 0000:00:1c.4: > > > > MEM > > > > > window: > > > > > > 0xb1000000-0xb18fffff pci 0000:00:1c.4: > > PREFETCH > > > window: > > > > > > 0x000000b0000000-0x000000b0ffffff pci > > 0000:00:1c.5: > > > PCI > > > > bridge, > > > > > > secondary bus 0000:0d pci 0000:00:1c.5: > IO > > > window: > > > > disabled pci > > > > > > 0000:00:1c.5: MEM window: disabled pci > > > 0000:00:1c.5: > > > > PREFETCH > > > > > > window: disabled pci 0000:00:1e.0: PCI > > bridge, > > > secondary > > > > bus > > > > > 0000:0e pci > > > > > > 0000:00:1e.0: IO window: disabled pci > > > 0000:00:1e.0: > > > > MEM > > > > > window: > > > > > > disabled pci 0000:00:1e.0: PREFETCH > > window: > > > disabled pci > > > > > 0000:00:01.0: > > > > > > PCI INT A -> GSI 28 (level, low) -> IRQ > 28 > > pci > > > > 0000:00:02.0: PCI > > > > > INT A > > > > > > -> GSI 29 (level, low) -> IRQ 29 pci > > 0000:00:03.0: > > > PCI INT > > > > A -> > > > > > GSI 24 > > > > > > (level, low) -> IRQ 24 pci 0000:00:04.0: > PCI > > INT A > > > -> GSI > > > > 25 > > > > > (level, > > > > > > low) -> IRQ 25 pci 0000:00:05.0: PCI INT > A > > -> GSI > > > 26 > > > > (level, low) > > > > > -> IRQ > > > > > > 26 pci 0000:00:06.0: PCI INT A -> GSI 27 > > (level, > > > low) -> > > > > IRQ 27 > > > > > pci > > > > > > 0000:00:07.0: PCI INT A -> GSI 30 > (level, > > low) -> > > > IRQ 30 > > > > pci > > > > > > 0000:00:08.0: PCI INT A -> GSI 31 > (level, > > low) -> > > > IRQ 31 > > > > pci > > > > > > 0000:00:09.0: PCI INT A -> GSI 32 > (level, > > low) -> > > > IRQ 32 > > > > pci > > > > > > 0000:00:0a.0: PCI INT A -> GSI 33 > (level, > > low) -> > > > IRQ 33 > > > > pci > > > > > > 0000:00:1c.0: PCI INT A -> GSI 16 > (level, > > low) -> > > > IRQ 16 > > > > > > xen_allocate_pirq: returning irq 16 for > gsi > > 16 > > > Already > > > > setup the > > > > > GSI :16 > > > > > > pci 0000:00:1c.4: PCI INT A -> GSI 16 > > (level, low) > > > -> IRQ > > > > 16 pci > > > > > > 0000:00:1c.5: PCI INT B -> GSI 17 > (level, > > low) -> > > > IRQ 17 > > > > NET: > > > > > Registered > > > > > > protocol family 2 IP route cache hash > table > > > entries: 65536 > > > > > (order: 7, > > > > > > 524288 bytes) TCP established hash table > > entries: > > > 262144 > > > > (order: > > > > > 10, > > > > > > 4194304 bytes) TCP bind hash table > entries: > > 65536 > > > (order: > > > > 10, > > > > > 4718592 > > > > > > bytes) TCP: Hash tables configured > > (established > > > 262144 > > > > bind > > > > > 65536) TCP > > > > > > reno registered NET: Registered protocol > > family 1 > > > pci > > > > > 0000:01:00.0: > > > > > > Disabling L0s pci 0000:01:00.1: > Disabling > > L0s > > > Trying to > > > > unpack > > > > > rootfs > > > > > > image as initramfs... Freeing initrd > memory: > > 6474k > > > freed > > > > DMA-API: > > > > > > preallocated 32768 debug entries > DMA-API: > > debugging > > > > enabled by > > > > > kernel > > > > > > config PCI-DMA: Using software bounce > > buffering for > > > IO > > > > (SWIOTLB) > > > > > DMA: > > > > > > Placing 64MB software IO TLB between > > > ffff880007525000 - > > > > > ffff88000b525000 > > > > > > DMA: software IO TLB at phys 0x7525000 - > > 0xb525000 > > > audit: > > > > > initializing > > > > > > netlink socket (disabled) type=2000 > > > > audit(1268750702.035:1): > > > > > initialized > > > > > > HugeTLB registered 2 MB page size, > > pre-allocated 0 > > > pages > > > > VFS: > > > > > Disk > > > > > > quotas dquot_6.5.2 Dquot-cache hash > table > > entries: > > > 512 > > > > (order 0, > > > > > 4096 > > > > > > bytes) msgmni has been set to 2970 > > cryptomgr_test > > > used > > > > greatest > > > > > stack > > > > > > depth: 5864 bytes left cryptomgr_test > used > > greatest > > > stack > > > > depth: > > > > > 5816 > > > > > > bytes left alg: No test for stdrng > (krng) > > Block > > > layer SCSI > > > > > generic (bsg) > > > > > > driver version 0.4 loaded (major 252) io > > scheduler > > > noop > > > > > registered io > > > > > > scheduler anticipatory registered io > > scheduler > > > deadline > > > > > registered io > > > > > > scheduler cfq registered (default) > > pci_hotplug: PCI > > > Hot > > > > Plug PCI > > > > > Core > > > > > > version: 0.5 pciehp 0000:00:09.0:pcie04: > HPC > > > vendor_id > > > > 8086 > > > > > device_id > > > > > > 3410 ss_vid 0 ss_did 0 pciehp: PCI > Express > > Hot Plug > > > > Controller > > > > > Driver > > > > > > version: 0.4 acpiphp: ACPI Hot Plug PCI > > Controller > > > Driver > > > > > version: 0.5 > > > > > > acpiphp_glue: Slot 2 already registered > by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already registered > by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already registered > by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already registered > by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already registered > by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already registered > by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already registered > by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already registered > by > > another > > > hotplug > > > > driver > > > > > > pci-stub: invalid id string "" input: > Sleep > > Button > > > as > > > > > > > > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 > > > > ACPI: > > > > > Sleep > > > > > > Button [SLPB] input: Power Button as > > > > > > > > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: > > > Power > > > > Button > > > > > [PWRF] > > > > > > registering netback hpet_acpi_add: no > > address or > > > irqs in > > > > _CRS > > > > > > Non-volatile memory driver v1.3 Linux > > agpgart > > > interface > > > > v0.103 > > > > > Serial: > > > > > > 8250/16550 driver, 4 ports, IRQ sharing > > enabled > > > > serial8250: ttyS1 > > > > > at I/O > > > > > > 0x2f8 (irq = 3) is a 16550A brd: module > > loaded > > > loop: > > > > module > > > > > loaded > > > > > > input: Macintosh mouse button emulation > as > > > > > /devices/virtual/input/input2 > > > > > > ahci 0000:00:1f.2: PCI INT A -> GSI 19 > > (level, low) > > > -> IRQ > > > > 19 > > > > > ahci > > > > > > 0000:00:1f.2: AHCI 0001.0200 32 slots 6 > > ports 3 > > > Gbps 0x3f > > > > impl > > > > > SATA mode > > > > > > ahci 0000:00:1f.2: flags: 64bit ncq sntf > pm > > led clo > > > pio > > > > slum part > > > > > ccc > > > > > > ems scsi0 : ahci scsi1 : ahci scsi2 : > ahci > > scsi3 : > > > ahci > > > > scsi4 : > > > > > ahci > > > > > > scsi5 : ahci ata1: SATA max UDMA/133 > > irq_stat > > > 0x00400040, > > > > > connection > > > > > > status changed irq 2996 ata2: SATA max > > UDMA/133 > > > abar > > > > > m2048@0xb1a00000 > > > > > > port 0xb1a00180 irq 2996 ata3: SATA max > > UDMA/133 > > > abar > > > > > m2048@0xb1a00000 > > > > > > port 0xb1a00200 irq 2996 ata4: SATA max > > UDMA/133 > > > abar > > > > > m2048@0xb1a00000 > > > > > > port 0xb1a00280 irq 2996 ata5: SATA max > > UDMA/133 > > > abar > > > > > m2048@0xb1a00000 > > > > > > port 0xb1a00300 irq 2996 ata6: SATA max > > UDMA/133 > > > abar > > > > > m2048@0xb1a00000 > > > > > > port 0xb1a00380 irq 2996 Fixed MDIO Bus: > > probed > > > ehci_hcd: > > > > USB 2.0 > > > > > > 'Enhanced' Host Controller (EHCI) Driver > > ehci_hcd > > > > 0000:00:1a.7: > > > > > PCI INT > > > > > > C -> GSI 18 (level, low) -> IRQ 18 > ehci_hcd > > > 0000:00:1a.7: > > > > EHCI > > > > > Host > > > > > > Controller ehci_hcd 0000:00:1a.7: new > USB > > bus > > > registered, > > > > > assigned bus > > > > > > number 1 ehci_hcd 0000:00:1a.7: debug > port 1 > > > ehci_hcd > > > > > 0000:00:1a.7: irq > > > > > > 18, io mem 0xb1a02000 ehci_hcd > 0000:00:1a.7: > > USB > > > 2.0 > > > > started, > > > > > EHCI 1.00 > > > > > > usb usb1: New USB device found, > > idVendor=1d6b, > > > > idProduct=0002 usb > > > > > usb1: > > > > > > New USB device strings: Mfr=3, > Product=2, > > > SerialNumber=1 > > > > usb > > > > > usb1: > > > > > > Product: EHCI Host Controller usb usb1: > > > Manufacturer: > > > > Linux > > > > > 2.6.32.9 > > > > > > ehci_hcd usb usb1: SerialNumber: > > 0000:00:1a.7 usb > > > usb1: > > > > > configuration #1 > > > > > > chosen from 1 choice hub 1-0:1.0: USB > hub > > found hub > > > > 1-0:1.0: 6 > > > > > ports > > > > > > detected ehci_hcd 0000:00:1d.7: PCI INT > A -> > > GSI 23 > > > > (level, low) > > > > > -> IRQ > > > > > > 23 ehci_hcd 0000:00:1d.7: EHCI Host > > Controller > > > ehci_hcd > > > > > 0000:00:1d.7: > > > > > > new USB bus registered, assigned bus > number > > 2 > > > ehci_hcd > > > > > 0000:00:1d.7: > > > > > > debug port 1 ehci_hcd 0000:00:1d.7: irq > 23, > > io mem > > > > 0xb1a01000 > > > > > ehci_hcd > > > > > > 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > usb > > usb2: > > > New USB > > > > device > > > > > found, > > > > > > idVendor=1d6b, idProduct=0002 usb usb2: > New > > USB > > > device > > > > strings: > > > > > Mfr=3, > > > > > > Product=2, SerialNumber=1 usb usb2: > Product: > > EHCI > > > Host > > > > Controller > > > > > usb > > > > > > usb2: Manufacturer: Linux 2.6.32.9 > ehci_hcd > > usb > > > usb2: > > > > > SerialNumber: > > > > > > 0000:00:1d.7 usb usb2: configuration #1 > > chosen from > > > 1 > > > > choice hub > > > > > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 > ports > > > detected > > > > ohci_hcd: > > > > > USB 1.1 > > > > > > 'Open' Host Controller (OHCI) Driver > > uhci_hcd: USB > > > > Universal Host > > > > > > Controller Interface driver > > xen_allocate_pirq: > > > returning > > > > irq 16 > > > > > for gsi > > > > > > 16 Already setup the GSI :16 uhci_hcd > > 0000:00:1a.0: > > > PCI > > > > INT A -> > > > > > GSI 16 > > > > > > (level, low) -> IRQ 16 uhci_hcd > > 0000:00:1a.0: UHCI > > > Host > > > > > Controller > > > > > > uhci_hcd 0000:00:1a.0: new USB bus > > registered, > > > assigned > > > > bus > > > > > number 3 > > > > > > uhci_hcd 0000:00:1a.0: irq 16, io base > > 0x000020e0 > > > usb > > > > usb3: New > > > > > USB > > > > > > device found, idVendor=1d6b, > idProduct=0001 > > usb > > > usb3: New > > > > USB > > > > > device > > > > > > strings: Mfr=3, Product=2, > SerialNumber=1 > > usb usb3: > > > > Product: UHCI > > > > > Host > > > > > > Controller usb usb3: Manufacturer: Linux > > 2.6.32.9 > > > uhci_hcd > > > > usb > > > > > usb3: > > > > > > SerialNumber: 0000:00:1a.0 usb usb3: > > configuration > > > #1 > > > > chosen from > > > > > 1 > > > > > > choice hub 3-0:1.0: USB hub found hub > > 3-0:1.0: 2 > > > ports > > > > detected > > > > > uhci_hcd > > > > > > 0000:00:1a.1: PCI INT B -> GSI 21 > (level, > > low) -> > > > IRQ 21 > > > > uhci_hcd > > > > > > 0000:00:1a.1: UHCI Host Controller > uhci_hcd > > > 0000:00:1a.1: > > > > new USB > > > > > bus > > > > > > registered, assigned bus number 4 > uhci_hcd > > > 0000:00:1a.1: > > > > irq 21, > > > > > io base > > > > > > 0x000020c0 usb usb4: New USB device > found, > > > idVendor=1d6b, > > > > > idProduct=0001 > > > > > > usb usb4: New USB device strings: Mfr=3, > > Product=2, > > > > > SerialNumber=1 usb > > > > > > usb4: Product: UHCI Host Controller usb > > usb4: > > > > Manufacturer: Linux > > > > > > 2.6.32.9 uhci_hcd usb usb4: > SerialNumber: > > > 0000:00:1a.1 usb > > > > usb4: > > > > > > configuration #1 chosen from 1 choice > hub > > 4-0:1.0: > > > USB hub > > > > found > > > > > hub > > > > > > 4-0:1.0: 2 ports detected > xen_allocate_pirq: > > > returning irq > > > > 19 for > > > > > gsi 19 > > > > > > Already setup the GSI :19 uhci_hcd > > 0000:00:1a.2: > > > PCI INT D > > > > -> GSI > > > > > 19 > > > > > > (level, low) -> IRQ 19 uhci_hcd > > 0000:00:1a.2: UHCI > > > Host > > > > > Controller > > > > > > uhci_hcd 0000:00:1a.2: new USB bus > > registered, > > > assigned > > > > bus > > > > > number 5 > > > > > > uhci_hcd 0000:00:1a.2: irq 19, io base > > 0x000020a0 > > > usb > > > > usb5: New > > > > > USB > > > > > > device found, idVendor=1d6b, > idProduct=0001 > > usb > > > usb5: New > > > > USB > > > > > device > > > > > > strings: Mfr=3, Product=2, > SerialNumber=1 > > usb usb5: > > > > Product: UHCI > > > > > Host > > > > > > Controller usb usb5: Manufacturer: Linux > > 2.6.32.9 > > > uhci_hcd > > > > usb > > > > > usb5: > > > > > > SerialNumber: 0000:00:1a.2 usb usb5: > > configuration > > > #1 > > > > chosen from > > > > > 1 > > > > > > choice hub 5-0:1.0: USB hub found hub > > 5-0:1.0: 2 > > > ports > > > > detected > > > > > > xen_allocate_pirq: returning irq 23 for > gsi > > 23 > > > Already > > > > setup the > > > > > GSI :23 > > > > > > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI > 23 > > (level, > > > low) -> > > > > IRQ 23 > > > > > > uhci_hcd 0000:00:1d.0: UHCI Host > Controller > > > uhci_hcd > > > > > 0000:00:1d.0: new > > > > > > USB bus registered, assigned bus number > 6 > > uhci_hcd > > > > 0000:00:1d.0: > > > > > irq 23, > > > > > > io base 0x00002080 usb usb6: New USB > device > > found, > > > > idVendor=1d6b, > > > > > > idProduct=0001 usb usb6: New USB device > > strings: > > > Mfr=3, > > > > > Product=2, > > > > > > SerialNumber=1 usb usb6: Product: UHCI > Host > > > Controller usb > > > > usb6: > > > > > > Manufacturer: Linux 2.6.32.9 uhci_hcd > usb > > usb6: > > > > SerialNumber: > > > > > > 0000:00:1d.0 usb usb6: configuration #1 > > chosen from > > > 1 > > > > choice hub > > > > > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 > ports > > > detected > > > > > xen_allocate_pirq: > > > > > > returning irq 19 for gsi 19 Already > setup > > the GSI > > > :19 > > > > uhci_hcd > > > > > > 0000:00:1d.1: PCI INT B -> GSI 19 > (level, > > low) -> > > > IRQ 19 > > > > uhci_hcd > > > > > > 0000:00:1d.1: UHCI Host Controller > uhci_hcd > > > 0000:00:1d.1: > > > > new USB > > > > > bus > > > > > > registered, assigned bus number 7 > uhci_hcd > > > 0000:00:1d.1: > > > > irq 19, > > > > > io base > > > > > > 0x00002060 usb usb7: New USB device > found, > > > idVendor=1d6b, > > > > > idProduct=0001 > > > > > > usb usb7: New USB device strings: Mfr=3, > > Product=2, > > > > > SerialNumber=1 usb > > > > > > usb7: Product: UHCI Host Controller usb > > usb7: > > > > Manufacturer: Linux > > > > > > 2.6.32.9 uhci_hcd usb usb7: > SerialNumber: > > > 0000:00:1d.1 usb > > > > usb7: > > > > > > configuration #1 chosen from 1 choice > hub > > 7-0:1.0: > > > USB hub > > > > found > > > > > hub > > > > > > 7-0:1.0: 2 ports detected > xen_allocate_pirq: > > > returning irq > > > > 18 for > > > > > gsi 18 > > > > > > Already setup the GSI :18 uhci_hcd > > 0000:00:1d.2: > > > PCI INT C > > > > -> GSI > > > > > 18 > > > > > > (level, low) -> IRQ 18 uhci_hcd > > 0000:00:1d.2: UHCI > > > Host > > > > > Controller > > > > > > uhci_hcd 0000:00:1d.2: new USB bus > > registered, > > > assigned > > > > bus > > > > > number 8 > > > > > > uhci_hcd 0000:00:1d.2: irq 18, io base > > 0x00002040 > > > usb > > > > usb8: New > > > > > USB > > > > > > device found, idVendor=1d6b, > idProduct=0001 > > usb > > > usb8: New > > > > USB > > > > > device > > > > > > strings: Mfr=3, Product=2, > SerialNumber=1 > > usb usb8: > > > > Product: UHCI > > > > > Host > > > > > > > > > > References > > > > > > Visible links > > > 1. mailto:[20]pasik@iki.fi > > > 2. mailto:[21]pasik@iki.fi > > > 3. mailto:[22]pasik@iki.fi > > > 4. mailto:[23]pasik@iki.fi > > > 5. mailto:[24]pasik@iki.fi > > > 6. > > [25]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 7. > > [26] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 8. mailto:[27]pasik@iki.fi > > > 9. > > [28]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 10. > > [29] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 11. mailto:[30]pasik@iki.fi > > > 12. mailto:[31]pasik@iki.fi > > > 13. > > [32]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 14. > > [33] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 15. mailto:[34]pasik@iki.fi > > > 16. > > [35]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 17. > > [36] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 18. mailto:[37]pasik@iki.fi > > > > References > > > > Visible links > > 1. mailto:pasik@iki.fi > > 2. mailto:pasik@iki.fi > > 3. mailto:pasik@iki.fi > > 4. mailto:pasik@iki.fi > > 5. mailto:pasik@iki.fi > > 6. mailto:pasik@iki.fi > > 7. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 8. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 9. mailto:pasik@iki.fi > > 10. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 11. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 12. mailto:pasik@iki.fi > > 13. mailto:pasik@iki.fi > > 14. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 15. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 16. mailto:pasik@iki.fi > > 17. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 18. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 19. mailto:pasik@iki.fi > > 20. mailto:pasik@iki.fi > > 21. mailto:pasik@iki.fi > > 22. mailto:pasik@iki.fi > > 23. mailto:pasik@iki.fi > > 24. mailto:pasik@iki.fi > > 25. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 26. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 27. mailto:pasik@iki.fi > > 28. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 29. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 30. mailto:pasik@iki.fi > > 31. mailto:pasik@iki.fi > > 32. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 33. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 34. mailto:pasik@iki.fi > > 35. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 36. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 37. mailto:pasik@iki.fi > [-- Attachment #1.2: Type: text/html, Size: 150440 bytes --] [-- Attachment #2: 18.doc --] [-- Type: application/msword, Size: 83337 bytes --] [-- Attachment #3: Type: text/plain, Size: 137 bytes --] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: crash in print_all_ICs() 2010-03-18 23:56 ` kishore kumar @ 2010-03-19 17:59 ` Pasi Kärkkäinen 2010-03-19 18:22 ` Re: [Xen-users] " Jeremy Fitzhardinge 2010-03-19 20:07 ` Konrad Rzeszutek Wilk 0 siblings, 2 replies; 32+ messages in thread From: Pasi Kärkkäinen @ 2010-03-19 17:59 UTC (permalink / raw) To: kishore kumar; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar wrote: > Attached is the capture log after changing the grub.conf to > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset > initcall_debug debug swiotlb=force apic=debug loglevel=10 > > for the dom 0 kernel command line. > Hmm, interesting. Now it seems to crash in a different place. Jeremy: Have you seen this one earlier? .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 0 0 0 0 0 0 0 00 IRQ to pin mappings: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 PGD 0 Oops: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.32.10 #2 RIP: e030:[<ffffffff819bf0e0>] [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 RSP: e02b:ffff880064edbe20 EFLAGS: 00010286 RAX: ffffffff816ed2c0 RBX: 0000000000000000 RCX: 000000000f640f01 RDX: ffff880066808000 RSI: ffff880064edbd40 RDI: 0000000000000000 RBP: ffff880064edbea0 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000000000000 R11: ffff880064edbce0 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880005ec8000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff880064eda000, task ffff880064ee0000) Stack: ffff880000000000 ffffffff00000000 ffff880000000000 ffffffff811ebee8 <0> ffff880064edbe60 0000000181083e7c 000000ff00000002 0000000000000002 <0> ffff880000000000 ffffffff810846f0 ffffffff817ce660 00000000291fd332 Call Trace: [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e [<ffffffff810846f0>] ? ktime_get+0x78/0x93 [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b [<ffffffff819ae961>] kernel_init+0x172/0x1cc [<ffffffff81013eaa>] child_rip+0xa/0x20 [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc [<ffffffff81013810>] ? restore_args+0x0/0x30 [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 [<ffffffff81013ea0>] ? child_rip+0x0/0x20 Code: 45 b0 0f 8c 5b fd ff ff 48 c7 c7 34 40 60 81 31 c0 45 31 e4 e8 11 d5 69 ff 31 ff e8 67 b5 6f ff eb 5a 48 85 c0 74 4a 48 8b 58 40 <48> 83 3b 00 74 40 44 89 e6 48 c7 c7 4d 40 60 81 31 c0 e8 e8 d4 RIP [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 RSP <ffff880064edbe20> CR2: 0000000000000000 ---[ end trace 0007ad9d59420718 ]--- swapper used greatest stack depth: 4168 bytes left Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: swapper Tainted: G D 2.6.32.10 #2 Call Trace: [<ffffffff8105b747>] panic+0xa5/0x167 [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf [<ffffffff8105f2b3>] ? do_exit+0x38a/0x701 [<ffffffff8100f43f>] ? xen_restore_fl_direct_end+0x0/0x1 [<ffffffff8108f823>] ? lock_release+0x179/0x184 [<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf [<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c [<ffffffff8105efa7>] do_exit+0x7e/0x701 [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef [<ffffffff8147764c>] oops_end+0xbf/0xc7 [<ffffffff81038a02>] no_context+0x1f1/0x200 [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef [<ffffffff81038c61>] __bad_area_nosemaphore+0x191/0x1b4 [<ffffffff8100f452>] ? check_events+0x12/0x20 [<ffffffff81038d0e>] bad_area_nosemaphore+0x13/0x15 [<ffffffff81478b20>] do_page_fault+0x16d/0x2a2 [<ffffffff814769d5>] page_fault+0x25/0x30 [<ffffffff819bf0e0>] ? print_all_ICs+0x487/0x500 [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e [<ffffffff810846f0>] ? ktime_get+0x78/0x93 [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b [<ffffffff819ae961>] kernel_init+0x172/0x1cc [<ffffffff81013eaa>] child_rip+0xa/0x20 [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc [<ffffffff81013810>] ? restore_args+0x0/0x30 [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 [<ffffffff81013ea0>] ? child_rip+0x0/0x20 -- Pasi > > > On Thu, Mar 18, 2010 at 2:27 PM, Pasi Kärkkäinen <[1]pasik@iki.fi> wrote: > > On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar wrote: > > pvdisplay does not work in my RHEL machine. > > > > I did pvscan. > > below is the output. > > > > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free] > > > > Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no VG: 0 [0 ] > > > > Ok so /dev/sda2 is the correct device holding the VolGroup01. > > Looking at your latest capture.doc I see this: > > Command line: ro root=/dev/vg00/lv01 console=hvc0 earlyprintk=xen > nomodeset initcall_debug debug swiotlb=force apic=debug loglevel=10 > > So your root= parameter is wrong! Edit grub.conf and replace it with the > actual root device: > root=/dev/VolGroup01/LogVol00 > > -- Pasi > > > On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen > <[1][2]pasik@iki.fi> wrote: > > > > On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore kumar wrote: > > > I did the below steps for pvops dom 0 kernel. > > > > > > make menuconfig > > > make bzImage > > > make modules > > > make modules_install > > > cp -a .config /boot/config-2.6.32.10 > > > cp -a System.map /boot/System.map-2.6.32.10 > > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10 > > > /sbin/mkinitrd -f --builtin=ahci /boot/initrd-2.6.32.10.img > > 2.6.32.10 > > > I tried root=/dev/VolGroup01/LogVol00 . > > > > > > > Ok. > > > > Please run "pvdisplay" to see which actual partition is the LVM > PV for > > your > > volume group. > > > > Also if you're running Fedora 12 you could try generating an > initrd > > image > > with dracut instead of mkinitrd. > > > > -- Pasi > > > > > > > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen > > <[1][2][3]pasik@iki.fi> wrote: > > > > > > On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore kumar > wrote: > > > > Here is the output of df -h and cat /etc/fstab of my > > machine. > > > > > > > > > > Did you try both root=/dev/mapper/VolGroup01-LogVol00 and > > > root=/dev/VolGroup01/LogVol00 arguments for the dom0 > kernel? > > > > > > How did you generate the initrd image for the dom0 kernel? > > > > > > Anyway this sounds like a grub.conf or initrd problem, not > Xen or > > pvops > > > dom0 kernel kernel problem. > > > > > > -- Pasi > > > > > > > Please let me know your thoughts. > > > > > > > > [root@localhost kishore]# df -h > > > > > > > > Filesystem Size Used Avail Use% Mounted on > > > > > > > > /dev/mapper/VolGroup01-LogVol00 > > > > > > > > 223G 29G 182G 14% > / > > > > > > > > /dev/sda1 99M 81M 13M 87% /boot > > > > > > > > tmpfs 757M 0 757M 0% /dev/shm > > > > > > > > [root@localhost kishore]# cat /etc/fstab > > > > > > > > /dev/VolGroup01/LogVol00 / ext3 defaults 1 1 > > > > > > > > LABEL=/boot /boot ext3 defaults 1 2 > > > > > > > > tmpfs /dev/shm tmpfs defaults 0 0 > > > > > > > > devpts /dev/pts devpts gid=5,mode=620 0 0 > > > > > > > > sysfs /sys sysfs defaults 0 0 > > > > > > > > proc /proc proc defaults 0 0 > > > > > > > > /dev/VolGroup01/LogVol01 swap swap defaults 0 0 > > > > > > > > [root@localhost kishore]# > > > > > > > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen > > > <[1][2][3][4]pasik@iki.fi> wrote: > > > > > > > > On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore > kumar > > wrote: > > > > > I am not sure. Can you please let me know how > to > > check > > > this? any > > > > command > > > > > ?? > > > > > > > > well simple "df -h" will show it. and also "cat > > /etc/fstab". > > > > You can also check it from your grub > configuration.. from > > the > > > working > > > > baremetal (non-Xen) entry. > > > > > > > > -- Pasi > > > > > > > > > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi > Kärkkäinen > > > > <[1][2][3][4][5]pasik@iki.fi> wrote: > > > > > > > > > > On Tue, Mar 16, 2010 at 03:22:50PM -0700, > kishore > > kumar > > > wrote: > > > > > > attached is the log captured in with > the word > > > document . > > > > > > > > > > > > > > > > Scanning logical volumes > > > > > Reading all physical volumes. This may > take a > > while... > > > > > Activating logical volumes > > > > > Volume group "VolGroup01" not found > > > > > Trying to resume from > /dev/VolGroup01/LogVol01 > > > > > Unable to access resume device > > (/dev/VolGroup01/LogVol01) > > > > > Creating root device. > > > > > Mounting root filesystem. > > > > > mount: could not find filesystem '/dev/root' > > > > > Setting up other filesystems. > > > > > Setting up new root fs > > > > > setuproot: moving /dev failed: No such file > or > > directory > > > > > no fstab.sys, mounting internal defaults > > > > > setuproot: error mounting /proc: No such > file or > > directory > > > > > setuproot: error mounting /sys: No such file > or > > directory > > > > > Switching to new root and running init. > > > > > unmounting old /dev > > > > > unmounting old /proc > > > > > unmounting old /sys > > > > > switchroot: mount failed: No such file or > directory > > > > > init used greatest stack depth: 4088 bytes > left > > > > > Kernel panic - not syncing: Attempted to > kill init! > > > > > > > > > > So it seems it gets all the way to executing > the > > initrd > > > image, > > > > > which then fails to mount the root fs. > > > > > > > > > > Earlier in the log: > > > > > ata1: SATA link up 3.0 Gbps (SStatus 123 > SControl > > 300) > > > > > ata1.00: ATA-8: Hitachi HDT721025SLA380, > STBOA3AA, > > max > > > UDMA/133 > > > > > ata1.00: 488397168 sectors, multi 0: LBA48 > NCQ > > (depth > > > 31/32), AA > > > > > ata1.00: configured for UDMA/133 > > > > > scsi 0:0:0:0: Direct-Access ATA > Hitachi > > HDT72102 > > > STBO > > > > PQ: 0 > > > > > ANSI: 5 > > > > > sd 0:0:0:0: Attached scsi generic sg0 type 0 > > > > > sd 0:0:0:0: [sda] 488397168 512-byte logical > > blocks: (250 > > > GB/232 > > > > GiB) > > > > > sd 0:0:0:0: [sda] Write Protect is off > > > > > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > > > > sd 0:0:0:0: [sda] Write cache: enabled, read > cache: > > > enabled, > > > > doesn't > > > > > support DPO or FUA > > > > > sda: sda1 sda2 > > > > > sd 0:0:0:0: [sda] Attached SCSI disk > > > > > > > > > > so /dev/sda was detected. Is your root lvm > volume > > on > > > /dev/sda ? > > > > > Is /dev/VolGroup01/LogVol01 really your root > fs? > > > > > > > > > > -- Pasi > > > > > > > > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi > > Kärkkäinen > > > > > <[1][2][3][4][5][6]pasik@iki.fi> wrote: > > > > > > > > > > > > On Tue, Mar 16, 2010 at 02:56:06PM > -0700, > > kishore > > > kumar > > > > wrote: > > > > > > > Please find the attached log > file after > > fixing > > > the > > > > dom 0 > > > > > kernel cmd > > > > > > line > > > > > > > as below > > > > > > > > > > > > > > ro root=/dev/VolGroup01/LogVol00 > > console=hvc0 > > > > > earlyprintk=xen > > > > > > nomodeset > > > > > > > > > > > > > > > > > > > There's something wrong with the log, > the > > dom0 > > > kernel > > > > parts are > > > > > all on > > > > > > one line.. > > > > > > It's really difficult to read it. > > > > > > > > > > > > -- Pasi > > > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 2:29 PM, > Pasi > > > Kärkkäinen > > > > > > <[1][2][3][4][5][6][7]pasik@iki.fi> > wrote: > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at > 02:16:22PM > > -0700, > > > kishore > > > > kumar > > > > > wrote: > > > > > > > > I did below steps. > > > > > > > > > > > > > > > > > > > > > > > > I pulled DOM 0 kernel > from > > > > > > > > git clone > > > > > > > > > > > > > > > > > > > > > > > > > > > > git://[1][2][3][4][5][6][7][8]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > > > linux-2.6-xen > > > > > > > > > > > > > > > > cd linux-2.6-xen > > > > > > > > > > > > > > > > make clean > > > > > > > > > > > > > > > > cp -a .config .config-old > > > > > > > > > > > > > > > > wget -O .config > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [2][3][4][5][6][7][8][9]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > > > > > > > > > make oldconfig > > > > > > > > > > > > > > > > make bzImage > > > > > > > > > > > > > > > > make modules > > > > > > > > > > > > > > > > make modules_install > > > > > > > > > > > > > > > > cp -a .config > > /boot/config-2.6.32.9 > > > > > > > > > > > > > > > > cp -a System.map > > > /boot/System.map-2.6.32.9 > > > > > > > > > > > > > > > > cp -a > arch/x86/boot/bzImage > > > > /boot/vmlinuz-2.6.32.9 > > > > > > > > > > > > > > > > and modified the > grub.conf as > > below > > > > > > > > > > > > > > > > > > > > > > > > Root(hd0,0) > > > > > > > > > > > > > > > > kernel /xen.gz > console=vga,com1 > > > > com1=115200,8n1 > > > > > msi=1 > > > > > > iommu=1 > > > > > > > > > > > > > > > > module /vmlinuz-2.6.32.9 > ro > > > > > root=/dev/VolGroup01/LogVo100 > > > > > > rhgb > > > > > > > quiet > > > > > > > > > > > > > > > > module > /initrd-2.6.32.9.img > > > > > > > > > > > > > > > > > > > > > > > > and rebooted the machine. > Then > > It > > > booted with > > > > some > > > > > xen > > > > > > messages > > > > > > > and > > > > > > > > stopped. Those were the > > messages > > > captured > > > > from > > > > > serial > > > > > > console. > > > > > > > > > > > > > > > > Please let me know if I > did > > something > > > wrong > > > > here. > > > > > > > > > > > > > > > > > > > > > > Please fix the kernel cmdline > based > > on my > > > earlier > > > > email, > > > > > and > > > > > > capture and > > > > > > > post the > > > > > > > serial console log again! > > > > > > > > > > > > > > -- Pasi > > > > > > > > > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at > 1:20 PM, > > Pasi > > > > Kärkkäinen > > > > > > > > <[3][4][5][6][7][8][9][10]pasik@iki.fi> > > wrote: > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at > > 01:16:28PM > > > -0700, > > > > Jeremy > > > > > > Fitzhardinge > > > > > > > wrote: > > > > > > > > > On 03/16/2010 12:48 > PM, Pasi > > > Kärkkäinen > > > > wrote: > > > > > > > > >> On Tue, Mar 16, 2010 > at > > 09:43:44PM > > > +0200, > > > > Pasi > > > > > > Kärkkäinen > > > > > > > wrote: > > > > > > > > >> > > > > > > > > >>> On Tue, Mar 16, > 2010 at > > > 10:32:17AM > > > > -0700, > > > > > kishore > > > > > > kumar > > > > > > > wrote: > > > > > > > > >>> > > > > > > > > >>>> Attached is > the > > output > > > captured > > > > from > > > > > serial > > > > > > console. > > > > > > > > >>>> > > > > > > > > >>>> Machine does > not boot > > after > > > > compiling xen > > > > > 3.4.3 > > > > > > with > > > > > > > pv_ops dom > > > > > > > > 0 kernel. > > > > > > > > >>>> > > > > > > > > >>>> Please let me > know > > what is > > > going > > > > wrong > > > > > here. > > > > > > > > >>>> > > > > > > > > >>>> > > > > > > > > >>> Ok this looks like > a bug > > that is > > > already > > > > being > > > > > sorted > > > > > > out on > > > > > > > > xen-devel mailinglist. > > > > > > > > >>> I added CC to > xen-devel. > > > > > > > > >>> > > > > > > > > >>> > > > > > > > > >> > > > > > > > > > > > > > > > > > > Those messages are > not a > > problem in > > > > themselves, > > > > > but the > > > > > > related > > > > > > > > problem > > > > > > > > > is believed to be > fixed in > > current > > > > > xen/stable-2.6.32.x. > > > > > > It > > > > > > > looks like > > > > > > > > > the output stops > there > > because the > > > Xen > > > > console > > > > > isn't set > > > > > > up > > > > > > > properly > > > > > > > > for > > > > > > > > > some reason. > > > > > > > > > > > > > > > > > > > > > > > > > Yeah, remove "rhgb > quiet" from > > the > > > options.. > > > > the > > > > > dom0 > > > > > > kernel > > > > > > > cmdline > > > > > > > > should be like this: > > > > > > > > ro > > root=/dev/VolGroup01/LogVol00 > > > > console=hvc0 > > > > > > earlyprintk=xen > > > > > > > nomodeset > > > > > > > > -- Pasi > > > > > > > > > > > > > > > > References > > > > > > > > > > > > > > > > Visible links > > > > > > > > 1. > > > > > > > > > > > > > > > > > > > > > [5][6][7][8][9][10][11]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > > > 2. > > > > > > > > > > > > > > > > > > > > > > > > > > > > [6][7][8][9][10][11][12]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > 3. > > mailto:[7][8][9][10][11][12][13]pasik@iki.fi > > > > > > > > > > > > > > References > > > > > > > > > > > > > > Visible links > > > > > > > 1. > > mailto:[9][10][11][12][13][14]pasik@iki.fi > > > > > > > 2. > > > > > > > > > > > > > > > > > > > > > [10][11][12][13][14][15]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > > 3. > > > > > > > > > > > > > > > > > > > > > [11][12][13][14][15][16]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > 4. > > mailto:[12][13][14][15][16][17]pasik@iki.fi > > > > > > > 5. > > > > > > > > > > > > > > > > > > > > > [13][14][15][16][17][18]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > > 6. > > > > > > > > > > > > > > > > > > > > > [14][15][16][17][18][19]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > 7. > > mailto:[15][16][17][18][19][20]pasik@iki.fi > > > > > > > Asserting Post complete GPIO!!! > > > > > > > Transfer control to CSM 16-bit > binary for > > legacy > > > boot > > > > > > > __ __ _____ _ _ > _____ > > > _ _ > > > > > > > \ \/ /___ _ __ |___ /| || | > |___ / > > _ __ > > > ___| || | > > > > _ > > > > > __ _ > > > > > > __ ___ > > > > > > > \ // _ \ '_ \ |_ \| || |_ > |_ \ __| > > '__/ > > > __| || > > > > |_ __| > > > > > '_ \| > > > > > > '__/ _ \ > > > > > > > / \ __/ | | | ___) |__ _| > ___) |__| > > | | > > > (__|__ > > > > _|__| > > > > > |_) | | > > > > > > | __/ > > > > > > > /_/\_\___|_| |_| |____(_) > |_|(_)____/ > > |_| > > > \___| |_| > > > > | > > > > > .__/|_| > > > > > > \___| > > > > > > > > > > > |_| > > > > > > > (XEN) Xen version 3.4.3-rc4-pre > > > (kishore@localdomain) > > > > (gcc > > > > > version > > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) > Mon Mar > > 15 > > > 13:44:31 PDT > > > > 2010 > > > > > > > (XEN) Latest ChangeSet: Tue Mar 09 > > 18:15:52 2010 > > > +0000 > > > > > > 19924:6e72f8c3c017 > > > > > > > (XEN) Command line: > console=vga,com1 > > > com1=115200,8n1 > > > > msi=1 > > > > > iommu=1 > > > > > > > (XEN) Video information: > > > > > > > (XEN) VGA is text mode 80x25, font > 8x16 > > > > > > > (XEN) VBE/DDC methods: none; EDID > > transfer time: > > > 0 > > > > seconds > > > > > > > (XEN) EDID info not retrieved > because no > > DDC > > > retrieval > > > > method > > > > > > detected > > > > > > > (XEN) Disc information: > > > > > > > (XEN) Found 1 MBR signatures > > > > > > > (XEN) Found 1 EDD information > structures > > > > > > > (XEN) Xen-e820 RAM map: > > > > > > > (XEN) 0000000000000000 - > 000000000009d000 > > > (usable) > > > > > > > (XEN) 000000000009d000 - > 00000000000a0000 > > > (reserved) > > > > > > > (XEN) 00000000000e0000 - > 0000000000100000 > > > (reserved) > > > > > > > (XEN) 0000000000100000 - > 000000006d597000 > > > (usable) > > > > > > > (XEN) 000000006d597000 - > 000000006d686000 > > > (reserved) > > > > > > > (XEN) 000000006d686000 - > 000000006f598000 > > > (usable) > > > > > > > (XEN) 000000006f598000 - > 000000006f59a000 > > > (reserved) > > > > > > > (XEN) 000000006f59a000 - > 000000006f5af000 > > (ACPI > > > NVS) > > > > > > > (XEN) 000000006f5af000 - > 000000006f5d9000 > > > (reserved) > > > > > > > (XEN) 000000006f5d9000 - > 000000006f5f9000 > > (ACPI > > > data) > > > > > > > (XEN) 000000006f5f9000 - > 000000006f6df000 > > (ACPI > > > NVS) > > > > > > > (XEN) 000000006f6df000 - > 000000006f700000 > > (ACPI > > > data) > > > > > > > (XEN) 000000006f700000 - > 0000000080000000 > > > (reserved) > > > > > > > (XEN) 00000000a0000000 - > 00000000b0000000 > > > (reserved) > > > > > > > (XEN) 00000000fc000000 - > 00000000fd000000 > > > (reserved) > > > > > > > (XEN) 00000000fed1c000 - > 00000000fed20000 > > > (reserved) > > > > > > > (XEN) 00000000ffc00000 - > 0000000100000000 > > > (reserved) > > > > > > > (XEN) System RAM: 1780MB > (1823000kB) > > > > > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 > INTEL > > ) > > > > > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 > INTEL > > THRLY > > > > 0 > > > > > > 1000013) > > > > > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 > INTEL > > THRLY > > > > 0 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 > INTEL > > THRLY > > > > 3 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: FACS 6F5F9000, 0040 > > > > > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 > INTEL > > THRLY > > > > 0 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 > INTEL > > THRLY > > > > 1 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 > INTEL > > THRLY > > > > 1 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 > INTEL > > THRLY > > > > 1 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 > INTEL > > THRLY > > > > 0 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC > (r1 > > INTEL SSDT > > > PM > > > > 4000 > > > > > INTL > > > > > > 20061109) > > > > > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 > INTEL > > THRLY > > > > 1 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) Domain heap initialised > > > > > > > (XEN) Processor #0 6:12 APIC > version 21 > > > > > > > (XEN) Processor #2 6:12 APIC > version 21 > > > > > > > (XEN) Processor #4 6:12 APIC > version 21 > > > > > > > (XEN) Processor #16 6:12 APIC > version 21 > > > > > > > (XEN) Processor #18 6:12 APIC > version 21 > > > > > > > (XEN) Processor #20 6:12 APIC > version 21 > > > > > > > (XEN) Processor #1 6:12 APIC > version 21 > > > > > > > (XEN) Processor #3 6:12 APIC > version 21 > > > > > > > (XEN) Processor #5 6:12 APIC > version 21 > > > > > > > (XEN) Processor #17 6:12 APIC > version 21 > > > > > > > (XEN) Processor #19 6:12 APIC > version 21 > > > > > > > (XEN) Processor #21 6:12 APIC > version 21 > > > > > > > (XEN) IOAPIC[0]: apic_id 8, version > 32, > > address > > > > 0xfec00000, GSI > > > > > 0-23 > > > > > > > (XEN) IOAPIC[1]: apic_id 9, version > 32, > > address > > > > 0xfec90000, GSI > > > > > 24-47 > > > > > > > (XEN) Enabling APIC mode: Phys. > Using 2 > > I/O > > > APICs > > > > > > > (XEN) Intel VT-d DMAR tables have > been > > parsed. > > > > > > > (XEN) Using scheduler: SMP Credit > > Scheduler > > > (credit) > > > > > > > (XEN) Detected 3200.207 MHz > processor. > > > > > > > (XEN) VMX: Supported advanced > features: > > > > > > > (XEN) - APIC MMIO access > virtualisation > > > > > > > (XEN) - APIC TPR shadow > > > > > > > (XEN) - Extended Page Tables (EPT) > > > > > > > (XEN) - Virtual-Processor > Identifiers > > (VPID) > > > > > > > (XEN) - Virtual NMI > > > > > > > (XEN) - MSR direct-access bitmap > > > > > > > (XEN) VMX: EPT is available. > > > > > > > (XEN) VMX: VPID is available. > > > > > > > (XEN) HVM: VMX enabled > > > > > > > (XEN) HVM: Hardware Assisted Paging > > detected. > > > > > > > (XEN) CPU0: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 1/2 eip > 88000 > > > > > > > (XEN) CPU1: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 2/4 eip > 88000 > > > > > > > (XEN) CPU2: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 3/16 eip > 88000 > > > > > > > (XEN) CPU3: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 4/18 eip > 88000 > > > > > > > (XEN) CPU4: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 5/20 eip > 88000 > > > > > > > (XEN) CPU5: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 6/1 eip > 88000 > > > > > > > (XEN) CPU6: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 7/3 eip > 88000 > > > > > > > (XEN) CPU7: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 8/5 eip > 88000 > > > > > > > (XEN) CPU8: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 9/17 eip > 88000 > > > > > > > (XEN) CPU9: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 10/19 eip > 88000 > > > > > > > (XEN) CPU10: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 11/21 eip > 88000 > > > > > > > (XEN) CPU11: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Total of 12 processors > activated. > > > > > > > (XEN) ENABLING IO-APIC IRQs > > > > > > > (XEN) -> Using new ACK method > > > > > > > (XEN) checking TSC synchronization > across > > 12 > > > CPUs: > > > > passed. > > > > > > > (XEN) Platform timer is 14.318MHz > HPET > > > > > > > ?(XEN) Brought up 12 CPUs > > > > > > > (XEN) Intel VT-d Snoop Control > supported. > > > > > > > (XEN) Intel VT-d DMA Passthrough > not > > supported. > > > > > > > (XEN) Intel VT-d Queued > Invalidation > > supported. > > > > > > > (XEN) Intel VT-d Interrupt > Remapping > > supported. > > > > > > > (XEN) I/O virtualisation enabled > > > > > > > (XEN) I/O virtualisation for PV > guests > > disabled > > > > > > > (XEN) xenoprof: Initialization > failed. > > Intel > > > processor > > > > model 44 > > > > > for P6 > > > > > > class family is not supported > > > > > > > (XEN) *** LOADING DOMAIN 0 *** > > > > > > > (XEN) Xen kernel: 64-bit, lsb, > compat32 > > > > > > > (XEN) Dom0 kernel: 64-bit, PAE, > lsb, > > paddr > > > 0x1000000 -> > > > > > 0x26bb000 > > > > > > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > > > > > > (XEN) Dom0 alloc.: > > > 0000000064000000->0000000068000000 > > > > > (404490 pages > > > > > > to be allocated) > > > > > > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > > > > > > (XEN) Loaded kernel: > > > ffffffff81000000->ffffffff826bb000 > > > > > > > (XEN) Init. ramdisk: > > > ffffffff826bb000->ffffffff82d0d800 > > > > > > > (XEN) Phys-Mach map: > > > ffffffff82d0e000->ffffffff83044050 > > > > > > > (XEN) Start info: > > > ffffffff83045000->ffffffff830454b4 > > > > > > > (XEN) Page tables: > > > ffffffff83046000->ffffffff83063000 > > > > > > > (XEN) Boot stack: > > > ffffffff83063000->ffffffff83064000 > > > > > > > (XEN) TOTAL: > > > ffffffff80000000->ffffffff83400000 > > > > > > > (XEN) ENTRY ADDRESS: > ffffffff819c1200 > > > > > > > (XEN) Dom0 has maximum 12 VCPUs > > > > > > > (XEN) Scrubbing Free RAM: .done. > > > > > > > (XEN) Xen trace buffers: disabled > > > > > > > (XEN) Std. Loglevel: Errors and > warnings > > > > > > > (XEN) Guest Loglevel: Nothing > > (Rate-limited: > > > Errors and > > > > > warnings) > > > > > > > (XEN) Xen is relinquishing VGA > console. > > > > > > > (XEN) *** Serial input -> DOM0 > (type > > 'CTRL-a' > > > three > > > > times to > > > > > switch > > > > > > input to Xen) > > > > > > > (XEN) Freed 128kB init memory. > > > > > > > mapping kernel into physical memory > > > > > > > Xen: setup ISA identity maps > > > > > > > about to get started... > > > > > > > Initializing cgroup subsys cpuset > > > > > > > Initializing cgroup subsys cpu > > > > > > > Linux version 2.6.32.9 > > > (kishore@localhost.localdomain) > > > > (gcc > > > > > version > > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 > SMP > > Mon Mar > > > 15 > > > > 15:16:28 PDT > > > > > 2010 > > > > > > > Command line: ro > > root=/dev/VolGroup01/LogVol00 > > > > console=hvc0 > > > > > > earlyprintk=xen nomodeset > > > > > > > KERNEL supported cpus: > > > > > > > Intel GenuineIntel > > > > > > > AMD AuthenticAMD > > > > > > > Centaur CentaurHauls > > > > > > > BIOS-provided physical RAM map: > > > > > > > Xen: 0000000000000000 - > 000000000009d000 > > > (usable) > > > > > > > Xen: 000000000009d000 - > 0000000000100000 > > > (reserved) > > > > > > > Xen: 0000000000100000 - > 0000000066c0a000 > > > (usable) > > > > > > > Xen: 000000006d597000 - > 000000006d686000 > > > (reserved) > > > > > > > Xen: 000000006f598000 - > 000000006f59a000 > > > (reserved) > > > > > > > Xen: 000000006f59a000 - > 000000006f5af000 > > (ACPI > > > NVS) > > > > > > > Xen: 000000006f5af000 - > 000000006f5d9000 > > > (reserved) > > > > > > > Xen: 000000006f5d9000 - > 000000006f5f9000 > > (ACPI > > > data) > > > > > > > Xen: 000000006f5f9000 - > 000000006f6df000 > > (ACPI > > > NVS) > > > > > > > Xen: 000000006f6df000 - > 000000006f700000 > > (ACPI > > > data) > > > > > > > Xen: 000000006f700000 - > 0000000080000000 > > > (reserved) > > > > > > > Xen: 00000000a0000000 - > 00000000b0000000 > > > (reserved) > > > > > > > Xen: 00000000fc000000 - > 00000000fd000000 > > > (reserved) > > > > > > > Xen: 00000000fed1c000 - > 00000000fed20000 > > > (reserved) > > > > > > > Xen: 00000000ffc00000 - > 0000000100000000 > > > (reserved) > > > > > > > bootconsole [xenboot0] enabled > > > > > > > DMI 2.4 present. > > > > > > > last_pfn = 0x66c0a max_arch_pfn = > > 0x400000000 > > > > > > > init_memory_mapping: > > > 0000000000000000-0000000066c0a000 > > > > > > > RAMDISK: 026bb000 - 02d0d800 > > > > > > > ACPI: RSDP 00000000000f03f0 00024 > (v02 > > INTEL ) > > > > > > > ACPI: XSDT 000000006f6fe120 00064 > (v01 > > INTEL > > > THRLY > > > > 00000000 > > > > > > 01000013) > > > > > > > ACPI: FACP 000000006f6fd000 000F4 > (v04 > > INTEL > > > THRLY > > > > 00000000 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: DSDT 000000006f6f5000 074F1 > (v02 > > INTEL > > > THRLY > > > > 00000003 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: FACS 000000006f5f9000 00040 > > > > > > > ACPI: APIC 000000006f6f4000 001CC > (v02 > > INTEL > > > THRLY > > > > 00000000 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: MCFG 000000006f6f3000 0003C > (v01 > > INTEL > > > THRLY > > > > 00000001 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: HPET 000000006f6f2000 00038 > (v01 > > INTEL > > > THRLY > > > > 00000001 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: SLIT 000000006f6f1000 00030 > (v01 > > INTEL > > > THRLY > > > > 00000001 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: WDDT 000000006f6f0000 00040 > (v01 > > INTEL > > > THRLY > > > > 00000000 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: SSDT 000000006f5d9000 1FDDC > (v01 > > INTEL > > > SSDT PM > > > > 00004000 > > > > > INTL > > > > > > 20061109) > > > > > > > ACPI: 000000006f6ee000 001D0 > (v01 > > INTEL > > > THRLY > > > > 00000001 > > > > > MSFT > > > > > > 0100000D) > > > > > > > No NUMA configuration found > > > > > > > Faking a node at > > > 0000000000000000-0000000066c0a000 > > > > > > > Bootmem setup node 0 > > > 0000000000000000-0000000066c0a000 > > > > > > > NODE_DATA [0000000000008000 - > > 000000000001ffff] > > > > > > > bootmap [0000000000020000 - > > 000000000002cd87] > > > pages d > > > > > > > (9 early reservations) ==> bootmem > > [0000000000 - > > > > 0066c0a000] > > > > > > > #0 [0000000000 - 0000001000] > BIOS data > > page > > > ==> > > > > [0000000000 > > > > > - > > > > > > 0000001000] > > > > > > > #1 [0003046000 - 0003063000] > XEN > > PAGETABLES > > > ==> > > > > [0003046000 > > > > > - > > > > > > 0003063000] > > > > > > > #2 [0000006000 - 0000008000] > > TRAMPOLINE > > > ==> > > > > [0000006000 > > > > > - > > > > > > 0000008000] > > > > > > > #3 [0001000000 - 000269ae98] > TEXT > > DATA BSS > > > ==> > > > > [0001000000 > > > > > - > > > > > > 000269ae98] > > > > > > > #4 [00026bb000 - 0002d0d800] > > RAMDISK > > > ==> > > > > [00026bb000 > > > > > - > > > > > > 0002d0d800] > > > > > > > #5 [0002d0e000 - 0003046000] > XEN START > > INFO > > > ==> > > > > [0002d0e000 > > > > > - > > > > > > 0003046000] > > > > > > > #6 [000269b000 - 000269b011] > > BRK > > > ==> > > > > [000269b000 > > > > > - > > > > > > 000269b011] > > > > > > > #7 [0000100000 - 000041a000] > > PGTABLE > > > ==> > > > > [0000100000 > > > > > - > > > > > > 000041a000] > > > > > > > #8 [0000001000 - 0000001030] > ACPI > > SLIT > > > ==> > > > > [0000001000 > > > > > - > > > > > > 0000001030] > > > > > > > found SMP MP-table at > [ffff8800000fd750] > > fd750 > > > > > > > Zone PFN ranges: > > > > > > > DMA 0x00000000 -> 0x00001000 > > > > > > > DMA32 0x00001000 -> 0x00100000 > > > > > > > Normal 0x00100000 -> 0x00100000 > > > > > > > Movable zone start PFN for each > node > > > > > > > early_node_map[2] active PFN ranges > > > > > > > 0: 0x00000000 -> 0x0000009d > > > > > > > 0: 0x00000100 -> 0x00066c0a > > > > > > > ACPI: PM-Timer IO Port: 0x408 > > > > > > > ACPI: LAPIC (acpi_id[0x00] > lapic_id[0x00] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x01] > lapic_id[0x02] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x02] > lapic_id[0x04] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x03] > lapic_id[0x10] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x04] > lapic_id[0x12] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x05] > lapic_id[0x14] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x06] > lapic_id[0x01] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x07] > lapic_id[0x03] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x08] > lapic_id[0x05] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x09] > lapic_id[0x11] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x0a] > lapic_id[0x13] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x0b] > lapic_id[0x15] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x0c] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x0d] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x0e] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x0f] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x10] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x11] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x12] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x13] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x14] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x15] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x16] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x17] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x00] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x01] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x02] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x03] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x04] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x05] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x06] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x07] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x08] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x09] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x10] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x11] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x12] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x13] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x14] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x15] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x16] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x17] high > level > > > lint[0x1]) > > > > > > > ACPI: IOAPIC (id[0x08] > address[0xfec00000] > > > gsi_base[0]) > > > > > > > IOAPIC[0]: apic_id 8, version 0, > address > > > 0xfec00000, GSI > > > > 0-0 > > > > > > > ACPI: IOAPIC (id[0x09] > address[0xfec90000] > > > gsi_base[24]) > > > > > > > IOAPIC[1]: apic_id 9, version 0, > address > > > 0xfec90000, GSI > > > > 24-24 > > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 > > global_irq 2 > > > dfl dfl) > > > > > > > ERROR: Unable to locate IOAPIC for > GSI 2 > > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 > > global_irq 9 > > > high > > > > level) > > > > > > > ERROR: Unable to locate IOAPIC for > GSI 9 > > > > > > > Using ACPI (MADT) for SMP > configuration > > > information > > > > > > > ACPI: HPET id: 0x8086a401 base: > 0xfed00000 > > > > > > > SMP: Allowing 12 CPUs, 0 hotplug > CPUs > > > > > > > PM: Registered nosave memory: > > 000000000009d000 - > > > > > 0000000000100000 > > > > > > > Allocating PCI resources starting > at > > b0000000 > > > (gap: > > > > > b0000000:4c000000) > > > > > > > Booting paravirtualized kernel on > Xen > > > > > > > Xen version: 3.4.3-rc4-pre > (preserve-AD) > > (dom0) > > > > > > > NR_CPUS:512 nr_cpumask_bits:512 > > nr_cpu_ids:12 > > > > nr_node_ids:1 > > > > > > > PERCPU: Embedded 478 pages/cpu > > @ffff880005ebc000 > > > > s1928024 r8192 > > > > > d21672 > > > > > > u1957888 > > > > > > > pcpu-alloc: s1928024 r8192 d21672 > u1957888 > > > > alloc=478*4096 > > > > > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 > [0] 03 > > [0] 04 > > > [0] 05 > > > > [0] 06 > > > > > [0] 07 > > > > > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 > [0] 11 > > > > > > > Xen: using vcpu_info placement > > > > > > > Built 1 zonelists in Node order, > mobility > > > grouping on. > > > > Total > > > > > pages: > > > > > > 409291 > > > > > > > Policy zone: DMA32 > > > > > > > Kernel command line: ro > > > root=/dev/VolGroup01/LogVol00 > > > > > console=hvc0 > > > > > > earlyprintk=xen nomodeset > > > > > > > PID hash table entries: 4096 > (order: 3, > > 32768 > > > bytes) > > > > > > > Initializing CPU#0 > > > > > > > DMA: Placing 64MB software IO TLB > between > > > > ffff880007525000 - > > > > > > ffff88000b525000 > > > > > > > DMA: software IO TLB at phys > 0x7525000 - > > > 0xb525000 > > > > > > > xen_swiotlb_fixup: > buf=ffff880007525000 > > > size=67108864 > > > > > > > xen_swiotlb_fixup: > buf=ffff88000b585000 > > > size=32768 > > > > > > > Memory: 1514268k/1683496k available > (4654k > > kernel > > > code, > > > > 396k > > > > > absent, > > > > > > 168832k reserved, 3443k data, 3396k > init) > > > > > > > SLUB: Genslabs=14, HWalign=64, > Order=0-3, > > > MinObjects=0, > > > > > CPUs=12, > > > > > > Nodes=1 > > > > > > > Hierarchical RCU implementation. > > > > > > > NR_IRQS:4352 nr_irqs:3072 > > > > > > > Already setup the GSI :0 > > > > > > > Already setup the GSI :1 > > > > > > > Already setup the GSI :2 > > > > > > > Already setup the GSI :3 > > > > > > > Already setup the GSI :4 > > > > > > > Already setup the GSI :5 > > > > > > > Already setup the GSI :6 > > > > > > > Already setup the GSI :7 > > > > > > > Already setup the GSI :8 > > > > > > > Already setup the GSI :9 > > > > > > > Already setup the GSI :10 > > > > > > > Already setup the GSI :11 > > > > > > > Already setup the GSI :12 > > > > > > > Already setup the GSI :13 > > > > > > > Already setup the GSI :14 > > > > > > > Already setup the GSI :15 > > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 > > global_irq 2 > > > dfl dfl) > > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 > > global_irq 9 > > > high > > > > level) > > > > > > > xen: sci override: source_irq=9 > > global_irq=9 > > > trigger=c > > > > > polarity=1 > > > > > > > xen_allocate_pirq: returning irq 9 > for gsi > > 9 > > > > > > > Already setup the GSI :9 > > > > > > > xen: acpi sci 9 > > > > > > > Console: colour VGA+ 80x25 > > > > > > > console [hvc0] enabled, bootconsole > > disabled > > > console > > > > [hvc0] > > > > > enabled, > > > > > > bootconsole disabled > > > > > > > Lock dependency validator: > Copyright (c) > > 2006 Red > > > Hat, > > > > Inc., > > > > > Ingo > > > > > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 > ... > > > MAX_LOCK_DEPTH: > > > > > 48 > > > > > > ... MAX_LOCKDEP_KEYS: 8191 ... > > > CLASSHASH_SIZE: > > > > > 4096 ... > > > > > > MAX_LOCKDEP_ENTRIES: 16384 ... > > > MAX_LOCKDEP_CHAINS: > > > > 32768 > > > > > ... > > > > > > CHAINHASH_SIZE: 16384 > memory used > > by lock > > > > dependency > > > > > info: > > > > > > 6367 kB per task-struct memory > footprint: > > 2688 > > > bytes > > > > allocated > > > > > 17039360 > > > > > > bytes of page_cgroup please try > > > 'cgroup_disable=memory' > > > > option if > > > > > you > > > > > > don't want memory cgroups installing > Xen > > timer for > > > CPU 0 > > > > Detected > > > > > > 3200.206 MHz processor. Calibrating > delay > > loop > > > (skipped), > > > > value > > > > > > calculated using timer frequency.. > 6400.41 > > BogoMIPS > > > > (lpj=3200206) > > > > > > Security Framework initialized > SELinux: > > > Initializing. > > > > Dentry > > > > > cache hash > > > > > > table entries: 262144 (order: 9, > 2097152 > > bytes) > > > > Inode-cache hash > > > > > table > > > > > > entries: 131072 (order: 8, 1048576 > bytes) > > > Mount-cache hash > > > > table > > > > > > entries: 256 Initializing cgroup > subsys ns > > > Initializing > > > > cgroup > > > > > subsys > > > > > > cpuacct Initializing cgroup subsys > memory > > > Initializing > > > > cgroup > > > > > subsys > > > > > > devices Initializing cgroup subsys > freezer > > > Initializing > > > > cgroup > > > > > subsys > > > > > > net_cls CPU: L1 I cache: 32K, L1 D > cache: > > 32K CPU: > > > L2 > > > > cache: 256K > > > > > CPU: > > > > > > L3 cache: 12288K CPU 0/0x0 -> Node 0 > CPU: > > > Unsupported > > > > number of > > > > > siblings > > > > > > 32 Performance Events: unsupported p6 > CPU > > model 44 > > > no PMU > > > > driver, > > > > > > software events only. lockdep: fixing > up > > > alternatives. SMP > > > > > alternatives: > > > > > > switching to UP code ACPI: Core > revision > > 20090903 > > > ftrace: > > > > > converting > > > > > > mcount calls to 0f 1f 44 00 00 > ftrace: > > allocating > > > 27971 > > > > entries > > > > > in 110 > > > > > > pages installing Xen timer for CPU 1 > > lockdep: > > > fixing up > > > > > alternatives. > > > > > > SMP alternatives: switching to SMP > code > > > Initializing CPU#1 > > > > CPU: > > > > > L1 I > > > > > > cache: 32K, L1 D cache: 32K CPU: L2 > cache: > > 256K > > > CPU: L3 > > > > cache: > > > > > 12288K > > > > > > CPU 1/0x0 -> Node 0 CPU: Unsupported > number > > of > > > siblings 32 > > > > > installing > > > > > > Xen timer for CPU 2 Initializing > CPU#2 CPU: > > L1 I > > > cache: > > > > 32K, L1 D > > > > > cache: > > > > > > 32K CPU: L2 cache: 256K CPU: L3 > cache: > > 12288K CPU > > > 2/0x0 -> > > > > Node 0 > > > > > CPU: > > > > > > Unsupported number of siblings 32 > installing > > Xen > > > timer for > > > > CPU 3 > > > > > > Initializing CPU#3 CPU: L1 I cache: > 32K, L1 > > D > > > cache: 32K > > > > CPU: L2 > > > > > cache: > > > > > > 256K CPU: L3 cache: 12288K CPU 3/0x0 > -> Node > > 0 CPU: > > > > Unsupported > > > > > number > > > > > > of siblings 32 installing Xen timer > for CPU > > 4 > > > Initializing > > > > CPU#4 > > > > > CPU: L1 > > > > > > I cache: 32K, L1 D cache: 32K CPU: L2 > cache: > > 256K > > > CPU: L3 > > > > cache: > > > > > 12288K > > > > > > CPU 4/0x0 -> Node 0 CPU: Unsupported > number > > of > > > siblings 32 > > > > > installing > > > > > > Xen timer for CPU 5 Initializing > CPU#5 CPU: > > L1 I > > > cache: > > > > 32K, L1 D > > > > > cache: > > > > > > 32K CPU: L2 cache: 256K CPU: L3 > cache: > > 12288K CPU > > > 5/0x0 -> > > > > Node 0 > > > > > CPU: > > > > > > Unsupported number of siblings 32 > installing > > Xen > > > timer for > > > > CPU 6 > > > > > > Initializing CPU#6 CPU: L1 I cache: > 32K, L1 > > D > > > cache: 32K > > > > CPU: L2 > > > > > cache: > > > > > > 256K CPU: L3 cache: 12288K CPU 6/0x0 > -> Node > > 0 CPU: > > > > Unsupported > > > > > number > > > > > > of siblings 32 installing Xen timer > for CPU > > 7 > > > Initializing > > > > CPU#7 > > > > > CPU: L1 > > > > > > I cache: 32K, L1 D cache: 32K CPU: L2 > cache: > > 256K > > > CPU: L3 > > > > cache: > > > > > 12288K > > > > > > CPU 7/0x0 -> Node 0 CPU: Unsupported > number > > of > > > siblings 32 > > > > > installing > > > > > > Xen timer for CPU 8 Initializing > CPU#8 CPU: > > L1 I > > > cache: > > > > 32K, L1 D > > > > > cache: > > > > > > 32K CPU: L2 cache: 256K CPU: L3 > cache: > > 12288K CPU > > > 8/0x0 -> > > > > Node 0 > > > > > CPU: > > > > > > Unsupported number of siblings 32 > installing > > Xen > > > timer for > > > > CPU 9 > > > > > > Initializing CPU#9 CPU: L1 I cache: > 32K, L1 > > D > > > cache: 32K > > > > CPU: L2 > > > > > cache: > > > > > > 256K CPU: L3 cache: 12288K CPU 9/0x0 > -> Node > > 0 CPU: > > > > Unsupported > > > > > number > > > > > > of siblings 32 installing Xen timer > for CPU > > 10 > > > > Initializing > > > > > CPU#10 CPU: > > > > > > L1 I cache: 32K, L1 D cache: 32K CPU: > L2 > > cache: > > > 256K CPU: > > > > L3 > > > > > cache: > > > > > > 12288K CPU 10/0x0 -> Node 0 CPU: > Unsupported > > number > > > of > > > > siblings > > > > > 32 > > > > > > installing Xen timer for CPU 11 > Initializing > > CPU#11 > > > CPU: > > > > L1 I > > > > > cache: > > > > > > 32K, L1 D cache: 32K CPU: L2 cache: > 256K > > CPU: L3 > > > cache: > > > > 12288K > > > > > CPU > > > > > > 11/0x0 -> Node 0 CPU: Unsupported > number of > > > siblings 32 > > > > Brought > > > > > up 12 > > > > > > CPUs Grant table initialized > regulator: core > > > version 0.5 > > > > Time: > > > > > 14:45:00 > > > > > > Date: 03/16/10 NET: Registered > protocol > > family 16 > > > > > xenbus_probe_init ok > > > > > > ACPI FADT declares the system doesn't > > support PCIe > > > ASPM, > > > > so > > > > > disable it > > > > > > ACPI: bus type pci registered PCI: > MCFG > > > configuration 0: > > > > base > > > > > a0000000 > > > > > > segment 0 buses 0 - 255 PCI: MCFG > area at > > a0000000 > > > > reserved in > > > > > E820 PCI: > > > > > > Using MMCONFIG at a0000000 - afffffff > PCI: > > Using > > > > configuration > > > > > type 1 > > > > > > for base access bio: create slab > <bio-0> at > > 0 ACPI > > > Error: > > > > Field > > > > > [CPB3] > > > > > > at 96 exceeds Buffer [NULL] size 64 > (bits) > > > > > (20090903/dsopcode-596) ACPI > > > > > > Error (psparse-0537): Method > parse/execution > > failed > > > > [\_SB_._OSC] > > > > > (Node > > > > > > ffff880064e00c98), > AE_AML_BUFFER_LIMIT ACPI: > > > Interpreter > > > > enabled > > > > > ACPI: > > > > > > (supports S0 S1 S3 S4 S5) ACPI: Using > IOAPIC > > for > > > interrupt > > > > > routing ACPI > > > > > > Warning: Incorrect checksum in table > [ ] > > - 97, > > > should > > > > be DB > > > > > > (20090903/tbutils-314) ACPI: No dock > devices > > found. > > > ACPI: > > > > PCI > > > > > Root > > > > > > Bridge [PCI0] (0000:00) pci > 0000:00:01.0: > > PME# > > > supported > > > > from D0 > > > > > D3hot > > > > > > D3cold pci 0000:00:01.0: PME# > disabled pci > > > 0000:00:02.0: > > > > PME# > > > > > supported > > > > > > from D0 D3hot D3cold pci > 0000:00:02.0: PME# > > > disabled pci > > > > > 0000:00:03.0: > > > > > > PME# supported from D0 D3hot D3cold > pci > > > 0000:00:03.0: PME# > > > > > disabled pci > > > > > > 0000:00:04.0: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > > 0000:00:04.0: PME# > > > > > > disabled pci 0000:00:05.0: PME# > supported > > from D0 > > > D3hot > > > > D3cold > > > > > pci > > > > > > 0000:00:05.0: PME# disabled pci > > 0000:00:06.0: PME# > > > > supported from > > > > > D0 > > > > > > D3hot D3cold pci 0000:00:06.0: PME# > disabled > > pci > > > > 0000:00:07.0: > > > > > PME# > > > > > > supported from D0 D3hot D3cold pci > > 0000:00:07.0: > > > PME# > > > > disabled > > > > > pci > > > > > > 0000:00:08.0: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > > 0000:00:08.0: PME# > > > > > > disabled pci 0000:00:09.0: PME# > supported > > from D0 > > > D3hot > > > > D3cold > > > > > pci > > > > > > 0000:00:09.0: PME# disabled pci > > 0000:00:0a.0: PME# > > > > supported from > > > > > D0 > > > > > > D3hot D3cold pci 0000:00:0a.0: PME# > disabled > > pci > > > > 0000:00:13.0: > > > > > PME# > > > > > > supported from D0 D3hot D3cold pci > > 0000:00:13.0: > > > PME# > > > > disabled > > > > > pci > > > > > > 0000:00:1a.7: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > > 0000:00:1a.7: PME# > > > > > > disabled pci 0000:00:1c.0: PME# > supported > > from D0 > > > D3hot > > > > D3cold > > > > > pci > > > > > > 0000:00:1c.0: PME# disabled pci > > 0000:00:1c.4: PME# > > > > supported from > > > > > D0 > > > > > > D3hot D3cold pci 0000:00:1c.4: PME# > disabled > > pci > > > > 0000:00:1c.5: > > > > > PME# > > > > > > supported from D0 D3hot D3cold pci > > 0000:00:1c.5: > > > PME# > > > > disabled > > > > > pci > > > > > > 0000:00:1d.7: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > > 0000:00:1d.7: PME# > > > > > > disabled pci 0000:00:1f.0: quirk: > region > > 0400-047f > > > claimed > > > > by > > > > > ICH6 > > > > > > ACPI/GPIO/TCO pci 0000:00:1f.0: > quirk: > > region > > > 0500-053f > > > > claimed > > > > > by ICH6 > > > > > > GPIO pci 0000:00:1f.0: ICH7 LPC > Generic IO > > decode 1 > > > PIO at > > > > 0680 > > > > > (mask > > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC > Generic IO > > decode > > > 2 PIO > > > > at 0ca0 > > > > > (mask > > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC > Generic IO > > decode > > > 3 PIO > > > > at 0600 > > > > > (mask > > > > > > 001f) pci 0000:00:1f.2: PME# > supported from > > D3hot > > > pci > > > > > 0000:00:1f.2: PME# > > > > > > disabled pci 0000:01:00.0: PME# > supported > > from D0 > > > D3hot > > > > D3cold > > > > > pci > > > > > > 0000:01:00.0: PME# disabled pci > > 0000:01:00.1: PME# > > > > supported from > > > > > D0 > > > > > > D3hot D3cold pci 0000:01:00.1: PME# > disabled > > pci > > > > 0000:0c:00.0: > > > > > disabling > > > > > > ASPM on pre-1.1 PCIe device. You can > enable > > it > > > with > > > > > 'pcie_aspm=force' > > > > > > pci 0000:00:1e.0: transparent bridge > ACPI: > > PCI Root > > > Bridge > > > > [PCI1] > > > > > > (0000:fe) ACPI: PCI Root Bridge > [PCI2] > > (0000:ff) > > > ACPI: PCI > > > > > Interrupt > > > > > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 > 12 14 > > 15) > > > ACPI: PCI > > > > > Interrupt Link > > > > > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 > 15) > > ACPI: PCI > > > > Interrupt > > > > > Link > > > > > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 > 15) > > ACPI: PCI > > > > Interrupt > > > > > Link > > > > > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 > 15) > > ACPI: PCI > > > > Interrupt > > > > > Link > > > > > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 > 15) *0, > > > disabled. > > > > ACPI: PCI > > > > > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 > 9 10 > > *11 12 > > > 14 15) > > > > ACPI: > > > > > PCI > > > > > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 > 9 10 > > 11 12 14 > > > 15) > > > > *0, > > > > > disabled. > > > > > > ACPI: PCI Interrupt Link [LNKH] (IRQs > 3 4 5 > > 6 7 9 > > > *10 11 > > > > 12 14 > > > > > 15) > > > > > > xenbus_probe_backend_init bus > registered ok > > > > > xenbus_probe_frontend_init > > > > > > bus registered ok xen_balloon: > Initialising > > balloon > > > driver > > > > with > > > > > page > > > > > > order 0. vgaarb: device added: > > > > > > > > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none > > > > vgaarb: > > > > > loaded > > > > > > SCSI subsystem initialized usbcore: > > registered new > > > > interface > > > > > driver > > > > > > usbfs usbcore: registered new > interface > > driver hub > > > > usbcore: > > > > > registered > > > > > > new device driver usb PCI: Using ACPI > for > > IRQ > > > routing > > > > NetLabel: > > > > > > Initializing NetLabel: domain hash > size = > > 128 > > > NetLabel: > > > > > protocols = > > > > > > UNLABELED CIPSOv4 NetLabel: > unlabeled > > traffic > > > allowed by > > > > default > > > > > > Switching to clocksource xen kstop/0 > used > > greatest > > > stack > > > > depth: > > > > > 6568 > > > > > > bytes left kstop/1 used greatest > stack > > depth: 6536 > > > bytes > > > > left > > > > > pnp: PnP > > > > > > ACPI init ACPI: bus type pnp > registered > > > xen_allocate_pirq: > > > > > returning irq > > > > > > 8 for gsi 8 Already setup the GSI :8 > > > xen_allocate_pirq: > > > > returning > > > > > irq 13 > > > > > > for gsi 13 Already setup the GSI :13 > pnp: > > PnP ACPI: > > > found > > > > 13 > > > > > devices > > > > > > ACPI: ACPI bus type pnp unregistered > system > > 00:07: > > > ioport > > > > range > > > > > > 0x500-0x53f has been reserved system > 00:07: > > ioport > > > range > > > > > 0x400-0x47f has > > > > > > been reserved system 00:07: ioport > range > > > 0x800-0x81f has > > > > been > > > > > reserved > > > > > > system 00:07: ioport range > 0x2f8-0x2ff has > > been > > > reserved > > > > system > > > > > 00:07: > > > > > > iomem range 0xfed1c000-0xfed8bffe > could not > > be > > > reserved > > > > system > > > > > 00:07: > > > > > > iomem range 0xff000000-0xffffffff > could not > > be > > > reserved > > > > system > > > > > 00:07: > > > > > > iomem range 0xfee00000-0xfeefffff has > been > > reserved > > > system > > > > 00:07: > > > > > iomem > > > > > > range 0xfe900000-0xfe90001f has been > > reserved > > > system > > > > 00:07: iomem > > > > > range > > > > > > 0xfea00000-0xfea0001f has been > reserved > > system > > > 00:07: > > > > iomem range > > > > > > 0xfed1b000-0xfed1bfff has been > reserved pci > > > 0000:0c:00.0: > > > > BAR 6: > > > > > no > > > > > > parent found for of device > > [0xffff0000-0xffffffff] > > > pci > > > > > 0000:00:01.0: PCI > > > > > > bridge, secondary bus 0000:01 pci > > 0000:00:01.0: > > > IO > > > > window: > > > > > > 0x1000-0x1fff pci 0000:00:01.0: MEM > > window: > > > > > 0xb1900000-0xb19fffff pci > > > > > > 0000:00:01.0: PREFETCH window: > disabled > > pci > > > > 0000:00:02.0: PCI > > > > > bridge, > > > > > > secondary bus 0000:02 pci > 0000:00:02.0: IO > > > window: > > > > disabled pci > > > > > > 0000:00:02.0: MEM window: disabled > pci > > > 0000:00:02.0: > > > > PREFETCH > > > > > > window: disabled pci 0000:00:03.0: > PCI > > bridge, > > > secondary > > > > bus > > > > > 0000:03 pci > > > > > > 0000:00:03.0: IO window: disabled > pci > > > 0000:00:03.0: > > > > MEM > > > > > window: > > > > > > disabled pci 0000:00:03.0: PREFETCH > > window: > > > disabled pci > > > > > 0000:00:04.0: > > > > > > PCI bridge, secondary bus 0000:04 pci > > 0000:00:04.0: > > > IO > > > > window: > > > > > > disabled pci 0000:00:04.0: MEM > window: > > disabled > > > pci > > > > > 0000:00:04.0: > > > > > > PREFETCH window: disabled pci > 0000:00:05.0: > > PCI > > > bridge, > > > > secondary > > > > > bus > > > > > > 0000:05 pci 0000:00:05.0: IO > window: > > disabled pci > > > > 0000:00:05.0: > > > > > MEM > > > > > > window: disabled pci 0000:00:05.0: > > PREFETCH > > > window: > > > > disabled > > > > > pci > > > > > > 0000:00:06.0: PCI bridge, secondary > bus > > 0000:06 pci > > > > 0000:00:06.0: > > > > > IO > > > > > > window: disabled pci 0000:00:06.0: > MEM > > window: > > > disabled > > > > pci > > > > > > 0000:00:06.0: PREFETCH window: > disabled > > pci > > > > 0000:00:07.0: PCI > > > > > bridge, > > > > > > secondary bus 0000:07 pci > 0000:00:07.0: IO > > > window: > > > > disabled pci > > > > > > 0000:00:07.0: MEM window: disabled > pci > > > 0000:00:07.0: > > > > PREFETCH > > > > > > window: disabled pci 0000:00:08.0: > PCI > > bridge, > > > secondary > > > > bus > > > > > 0000:08 pci > > > > > > 0000:00:08.0: IO window: disabled > pci > > > 0000:00:08.0: > > > > MEM > > > > > window: > > > > > > disabled pci 0000:00:08.0: PREFETCH > > window: > > > disabled pci > > > > > 0000:00:09.0: > > > > > > PCI bridge, secondary bus 0000:09 pci > > 0000:00:09.0: > > > IO > > > > window: > > > > > > 0x3000-0x3fff pci 0000:00:09.0: MEM > > window: > > > > > 0xb1b00000-0xb1cfffff pci > > > > > > 0000:00:09.0: PREFETCH window: > > > > > 0x000000b1d00000-0x000000b1efffff pci > > > > > > 0000:00:0a.0: PCI bridge, secondary > bus > > 0000:0a pci > > > > 0000:00:0a.0: > > > > > IO > > > > > > window: disabled pci 0000:00:0a.0: > MEM > > window: > > > disabled > > > > pci > > > > > > 0000:00:0a.0: PREFETCH window: > disabled > > pci > > > > 0000:00:1c.0: PCI > > > > > bridge, > > > > > > secondary bus 0000:0b pci > 0000:00:1c.0: IO > > > window: > > > > disabled pci > > > > > > 0000:00:1c.0: MEM window: disabled > pci > > > 0000:00:1c.0: > > > > PREFETCH > > > > > > window: disabled pci 0000:00:1c.4: > PCI > > bridge, > > > secondary > > > > bus > > > > > 0000:0c pci > > > > > > 0000:00:1c.4: IO window: disabled > pci > > > 0000:00:1c.4: > > > > MEM > > > > > window: > > > > > > 0xb1000000-0xb18fffff pci > 0000:00:1c.4: > > PREFETCH > > > window: > > > > > > 0x000000b0000000-0x000000b0ffffff pci > > 0000:00:1c.5: > > > PCI > > > > bridge, > > > > > > secondary bus 0000:0d pci > 0000:00:1c.5: IO > > > window: > > > > disabled pci > > > > > > 0000:00:1c.5: MEM window: disabled > pci > > > 0000:00:1c.5: > > > > PREFETCH > > > > > > window: disabled pci 0000:00:1e.0: > PCI > > bridge, > > > secondary > > > > bus > > > > > 0000:0e pci > > > > > > 0000:00:1e.0: IO window: disabled > pci > > > 0000:00:1e.0: > > > > MEM > > > > > window: > > > > > > disabled pci 0000:00:1e.0: PREFETCH > > window: > > > disabled pci > > > > > 0000:00:01.0: > > > > > > PCI INT A -> GSI 28 (level, low) -> > IRQ 28 > > pci > > > > 0000:00:02.0: PCI > > > > > INT A > > > > > > -> GSI 29 (level, low) -> IRQ 29 pci > > 0000:00:03.0: > > > PCI INT > > > > A -> > > > > > GSI 24 > > > > > > (level, low) -> IRQ 24 pci > 0000:00:04.0: PCI > > INT A > > > -> GSI > > > > 25 > > > > > (level, > > > > > > low) -> IRQ 25 pci 0000:00:05.0: PCI > INT A > > -> GSI > > > 26 > > > > (level, low) > > > > > -> IRQ > > > > > > 26 pci 0000:00:06.0: PCI INT A -> GSI > 27 > > (level, > > > low) -> > > > > IRQ 27 > > > > > pci > > > > > > 0000:00:07.0: PCI INT A -> GSI 30 > (level, > > low) -> > > > IRQ 30 > > > > pci > > > > > > 0000:00:08.0: PCI INT A -> GSI 31 > (level, > > low) -> > > > IRQ 31 > > > > pci > > > > > > 0000:00:09.0: PCI INT A -> GSI 32 > (level, > > low) -> > > > IRQ 32 > > > > pci > > > > > > 0000:00:0a.0: PCI INT A -> GSI 33 > (level, > > low) -> > > > IRQ 33 > > > > pci > > > > > > 0000:00:1c.0: PCI INT A -> GSI 16 > (level, > > low) -> > > > IRQ 16 > > > > > > xen_allocate_pirq: returning irq 16 > for gsi > > 16 > > > Already > > > > setup the > > > > > GSI :16 > > > > > > pci 0000:00:1c.4: PCI INT A -> GSI 16 > > (level, low) > > > -> IRQ > > > > 16 pci > > > > > > 0000:00:1c.5: PCI INT B -> GSI 17 > (level, > > low) -> > > > IRQ 17 > > > > NET: > > > > > Registered > > > > > > protocol family 2 IP route cache hash > table > > > entries: 65536 > > > > > (order: 7, > > > > > > 524288 bytes) TCP established hash > table > > entries: > > > 262144 > > > > (order: > > > > > 10, > > > > > > 4194304 bytes) TCP bind hash table > entries: > > 65536 > > > (order: > > > > 10, > > > > > 4718592 > > > > > > bytes) TCP: Hash tables configured > > (established > > > 262144 > > > > bind > > > > > 65536) TCP > > > > > > reno registered NET: Registered > protocol > > family 1 > > > pci > > > > > 0000:01:00.0: > > > > > > Disabling L0s pci 0000:01:00.1: > Disabling > > L0s > > > Trying to > > > > unpack > > > > > rootfs > > > > > > image as initramfs... Freeing initrd > memory: > > 6474k > > > freed > > > > DMA-API: > > > > > > preallocated 32768 debug entries > DMA-API: > > debugging > > > > enabled by > > > > > kernel > > > > > > config PCI-DMA: Using software bounce > > buffering for > > > IO > > > > (SWIOTLB) > > > > > DMA: > > > > > > Placing 64MB software IO TLB between > > > ffff880007525000 - > > > > > ffff88000b525000 > > > > > > DMA: software IO TLB at phys > 0x7525000 - > > 0xb525000 > > > audit: > > > > > initializing > > > > > > netlink socket (disabled) type=2000 > > > > audit(1268750702.035:1): > > > > > initialized > > > > > > HugeTLB registered 2 MB page size, > > pre-allocated 0 > > > pages > > > > VFS: > > > > > Disk > > > > > > quotas dquot_6.5.2 Dquot-cache hash > table > > entries: > > > 512 > > > > (order 0, > > > > > 4096 > > > > > > bytes) msgmni has been set to 2970 > > cryptomgr_test > > > used > > > > greatest > > > > > stack > > > > > > depth: 5864 bytes left cryptomgr_test > used > > greatest > > > stack > > > > depth: > > > > > 5816 > > > > > > bytes left alg: No test for stdrng > (krng) > > Block > > > layer SCSI > > > > > generic (bsg) > > > > > > driver version 0.4 loaded (major 252) > io > > scheduler > > > noop > > > > > registered io > > > > > > scheduler anticipatory registered io > > scheduler > > > deadline > > > > > registered io > > > > > > scheduler cfq registered (default) > > pci_hotplug: PCI > > > Hot > > > > Plug PCI > > > > > Core > > > > > > version: 0.5 pciehp > 0000:00:09.0:pcie04: HPC > > > vendor_id > > > > 8086 > > > > > device_id > > > > > > 3410 ss_vid 0 ss_did 0 pciehp: PCI > Express > > Hot Plug > > > > Controller > > > > > Driver > > > > > > version: 0.4 acpiphp: ACPI Hot Plug > PCI > > Controller > > > Driver > > > > > version: 0.5 > > > > > > acpiphp_glue: Slot 2 already > registered by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already > registered by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already > registered by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already > registered by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already > registered by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already > registered by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already > registered by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already > registered by > > another > > > hotplug > > > > driver > > > > > > pci-stub: invalid id string "" input: > Sleep > > Button > > > as > > > > > > > > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 > > > > ACPI: > > > > > Sleep > > > > > > Button [SLPB] input: Power Button as > > > > > > > > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: > > > Power > > > > Button > > > > > [PWRF] > > > > > > registering netback hpet_acpi_add: no > > address or > > > irqs in > > > > _CRS > > > > > > Non-volatile memory driver v1.3 Linux > > agpgart > > > interface > > > > v0.103 > > > > > Serial: > > > > > > 8250/16550 driver, 4 ports, IRQ > sharing > > enabled > > > > serial8250: ttyS1 > > > > > at I/O > > > > > > 0x2f8 (irq = 3) is a 16550A brd: > module > > loaded > > > loop: > > > > module > > > > > loaded > > > > > > input: Macintosh mouse button > emulation as > > > > > /devices/virtual/input/input2 > > > > > > ahci 0000:00:1f.2: PCI INT A -> GSI > 19 > > (level, low) > > > -> IRQ > > > > 19 > > > > > ahci > > > > > > 0000:00:1f.2: AHCI 0001.0200 32 slots > 6 > > ports 3 > > > Gbps 0x3f > > > > impl > > > > > SATA mode > > > > > > ahci 0000:00:1f.2: flags: 64bit ncq > sntf pm > > led clo > > > pio > > > > slum part > > > > > ccc > > > > > > ems scsi0 : ahci scsi1 : ahci scsi2 > : ahci > > scsi3 : > > > ahci > > > > scsi4 : > > > > > ahci > > > > > > scsi5 : ahci ata1: SATA max UDMA/133 > > irq_stat > > > 0x00400040, > > > > > connection > > > > > > status changed irq 2996 ata2: SATA > max > > UDMA/133 > > > abar > > > > > m2048@0xb1a00000 > > > > > > port 0xb1a00180 irq 2996 ata3: SATA > max > > UDMA/133 > > > abar > > > > > m2048@0xb1a00000 > > > > > > port 0xb1a00200 irq 2996 ata4: SATA > max > > UDMA/133 > > > abar > > > > > m2048@0xb1a00000 > > > > > > port 0xb1a00280 irq 2996 ata5: SATA > max > > UDMA/133 > > > abar > > > > > m2048@0xb1a00000 > > > > > > port 0xb1a00300 irq 2996 ata6: SATA > max > > UDMA/133 > > > abar > > > > > m2048@0xb1a00000 > > > > > > port 0xb1a00380 irq 2996 Fixed MDIO > Bus: > > probed > > > ehci_hcd: > > > > USB 2.0 > > > > > > 'Enhanced' Host Controller (EHCI) > Driver > > ehci_hcd > > > > 0000:00:1a.7: > > > > > PCI INT > > > > > > C -> GSI 18 (level, low) -> IRQ 18 > ehci_hcd > > > 0000:00:1a.7: > > > > EHCI > > > > > Host > > > > > > Controller ehci_hcd 0000:00:1a.7: new > USB > > bus > > > registered, > > > > > assigned bus > > > > > > number 1 ehci_hcd 0000:00:1a.7: debug > port 1 > > > ehci_hcd > > > > > 0000:00:1a.7: irq > > > > > > 18, io mem 0xb1a02000 ehci_hcd > 0000:00:1a.7: > > USB > > > 2.0 > > > > started, > > > > > EHCI 1.00 > > > > > > usb usb1: New USB device found, > > idVendor=1d6b, > > > > idProduct=0002 usb > > > > > usb1: > > > > > > New USB device strings: Mfr=3, > Product=2, > > > SerialNumber=1 > > > > usb > > > > > usb1: > > > > > > Product: EHCI Host Controller usb > usb1: > > > Manufacturer: > > > > Linux > > > > > 2.6.32.9 > > > > > > ehci_hcd usb usb1: SerialNumber: > > 0000:00:1a.7 usb > > > usb1: > > > > > configuration #1 > > > > > > chosen from 1 choice hub 1-0:1.0: USB > hub > > found hub > > > > 1-0:1.0: 6 > > > > > ports > > > > > > detected ehci_hcd 0000:00:1d.7: PCI > INT A -> > > GSI 23 > > > > (level, low) > > > > > -> IRQ > > > > > > 23 ehci_hcd 0000:00:1d.7: EHCI Host > > Controller > > > ehci_hcd > > > > > 0000:00:1d.7: > > > > > > new USB bus registered, assigned bus > number > > 2 > > > ehci_hcd > > > > > 0000:00:1d.7: > > > > > > debug port 1 ehci_hcd 0000:00:1d.7: > irq 23, > > io mem > > > > 0xb1a01000 > > > > > ehci_hcd > > > > > > 0000:00:1d.7: USB 2.0 started, EHCI > 1.00 usb > > usb2: > > > New USB > > > > device > > > > > found, > > > > > > idVendor=1d6b, idProduct=0002 usb > usb2: New > > USB > > > device > > > > strings: > > > > > Mfr=3, > > > > > > Product=2, SerialNumber=1 usb usb2: > Product: > > EHCI > > > Host > > > > Controller > > > > > usb > > > > > > usb2: Manufacturer: Linux 2.6.32.9 > ehci_hcd > > usb > > > usb2: > > > > > SerialNumber: > > > > > > 0000:00:1d.7 usb usb2: configuration > #1 > > chosen from > > > 1 > > > > choice hub > > > > > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 > ports > > > detected > > > > ohci_hcd: > > > > > USB 1.1 > > > > > > 'Open' Host Controller (OHCI) Driver > > uhci_hcd: USB > > > > Universal Host > > > > > > Controller Interface driver > > xen_allocate_pirq: > > > returning > > > > irq 16 > > > > > for gsi > > > > > > 16 Already setup the GSI :16 uhci_hcd > > 0000:00:1a.0: > > > PCI > > > > INT A -> > > > > > GSI 16 > > > > > > (level, low) -> IRQ 16 uhci_hcd > > 0000:00:1a.0: UHCI > > > Host > > > > > Controller > > > > > > uhci_hcd 0000:00:1a.0: new USB bus > > registered, > > > assigned > > > > bus > > > > > number 3 > > > > > > uhci_hcd 0000:00:1a.0: irq 16, io > base > > 0x000020e0 > > > usb > > > > usb3: New > > > > > USB > > > > > > device found, idVendor=1d6b, > idProduct=0001 > > usb > > > usb3: New > > > > USB > > > > > device > > > > > > strings: Mfr=3, Product=2, > SerialNumber=1 > > usb usb3: > > > > Product: UHCI > > > > > Host > > > > > > Controller usb usb3: Manufacturer: > Linux > > 2.6.32.9 > > > uhci_hcd > > > > usb > > > > > usb3: > > > > > > SerialNumber: 0000:00:1a.0 usb usb3: > > configuration > > > #1 > > > > chosen from > > > > > 1 > > > > > > choice hub 3-0:1.0: USB hub found hub > > 3-0:1.0: 2 > > > ports > > > > detected > > > > > uhci_hcd > > > > > > 0000:00:1a.1: PCI INT B -> GSI 21 > (level, > > low) -> > > > IRQ 21 > > > > uhci_hcd > > > > > > 0000:00:1a.1: UHCI Host Controller > uhci_hcd > > > 0000:00:1a.1: > > > > new USB > > > > > bus > > > > > > registered, assigned bus number 4 > uhci_hcd > > > 0000:00:1a.1: > > > > irq 21, > > > > > io base > > > > > > 0x000020c0 usb usb4: New USB device > found, > > > idVendor=1d6b, > > > > > idProduct=0001 > > > > > > usb usb4: New USB device strings: > Mfr=3, > > Product=2, > > > > > SerialNumber=1 usb > > > > > > usb4: Product: UHCI Host Controller > usb > > usb4: > > > > Manufacturer: Linux > > > > > > 2.6.32.9 uhci_hcd usb usb4: > SerialNumber: > > > 0000:00:1a.1 usb > > > > usb4: > > > > > > configuration #1 chosen from 1 choice > hub > > 4-0:1.0: > > > USB hub > > > > found > > > > > hub > > > > > > 4-0:1.0: 2 ports detected > xen_allocate_pirq: > > > returning irq > > > > 19 for > > > > > gsi 19 > > > > > > Already setup the GSI :19 uhci_hcd > > 0000:00:1a.2: > > > PCI INT D > > > > -> GSI > > > > > 19 > > > > > > (level, low) -> IRQ 19 uhci_hcd > > 0000:00:1a.2: UHCI > > > Host > > > > > Controller > > > > > > uhci_hcd 0000:00:1a.2: new USB bus > > registered, > > > assigned > > > > bus > > > > > number 5 > > > > > > uhci_hcd 0000:00:1a.2: irq 19, io > base > > 0x000020a0 > > > usb > > > > usb5: New > > > > > USB > > > > > > device found, idVendor=1d6b, > idProduct=0001 > > usb > > > usb5: New > > > > USB > > > > > device > > > > > > strings: Mfr=3, Product=2, > SerialNumber=1 > > usb usb5: > > > > Product: UHCI > > > > > Host > > > > > > Controller usb usb5: Manufacturer: > Linux > > 2.6.32.9 > > > uhci_hcd > > > > usb > > > > > usb5: > > > > > > SerialNumber: 0000:00:1a.2 usb usb5: > > configuration > > > #1 > > > > chosen from > > > > > 1 > > > > > > choice hub 5-0:1.0: USB hub found hub > > 5-0:1.0: 2 > > > ports > > > > detected > > > > > > xen_allocate_pirq: returning irq 23 > for gsi > > 23 > > > Already > > > > setup the > > > > > GSI :23 > > > > > > uhci_hcd 0000:00:1d.0: PCI INT A -> > GSI 23 > > (level, > > > low) -> > > > > IRQ 23 > > > > > > uhci_hcd 0000:00:1d.0: UHCI Host > Controller > > > uhci_hcd > > > > > 0000:00:1d.0: new > > > > > > USB bus registered, assigned bus > number 6 > > uhci_hcd > > > > 0000:00:1d.0: > > > > > irq 23, > > > > > > io base 0x00002080 usb usb6: New USB > device > > found, > > > > idVendor=1d6b, > > > > > > idProduct=0001 usb usb6: New USB > device > > strings: > > > Mfr=3, > > > > > Product=2, > > > > > > SerialNumber=1 usb usb6: Product: > UHCI Host > > > Controller usb > > > > usb6: > > > > > > Manufacturer: Linux 2.6.32.9 uhci_hcd > usb > > usb6: > > > > SerialNumber: > > > > > > 0000:00:1d.0 usb usb6: configuration > #1 > > chosen from > > > 1 > > > > choice hub > > > > > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 > ports > > > detected > > > > > xen_allocate_pirq: > > > > > > returning irq 19 for gsi 19 Already > setup > > the GSI > > > :19 > > > > uhci_hcd > > > > > > 0000:00:1d.1: PCI INT B -> GSI 19 > (level, > > low) -> > > > IRQ 19 > > > > uhci_hcd > > > > > > 0000:00:1d.1: UHCI Host Controller > uhci_hcd > > > 0000:00:1d.1: > > > > new USB > > > > > bus > > > > > > registered, assigned bus number 7 > uhci_hcd > > > 0000:00:1d.1: > > > > irq 19, > > > > > io base > > > > > > 0x00002060 usb usb7: New USB device > found, > > > idVendor=1d6b, > > > > > idProduct=0001 > > > > > > usb usb7: New USB device strings: > Mfr=3, > > Product=2, > > > > > SerialNumber=1 usb > > > > > > usb7: Product: UHCI Host Controller > usb > > usb7: > > > > Manufacturer: Linux > > > > > > 2.6.32.9 uhci_hcd usb usb7: > SerialNumber: > > > 0000:00:1d.1 usb > > > > usb7: > > > > > > configuration #1 chosen from 1 choice > hub > > 7-0:1.0: > > > USB hub > > > > found > > > > > hub > > > > > > 7-0:1.0: 2 ports detected > xen_allocate_pirq: > > > returning irq > > > > 18 for > > > > > gsi 18 > > > > > > Already setup the GSI :18 uhci_hcd > > 0000:00:1d.2: > > > PCI INT C > > > > -> GSI > > > > > 18 > > > > > > (level, low) -> IRQ 18 uhci_hcd > > 0000:00:1d.2: UHCI > > > Host > > > > > Controller > > > > > > uhci_hcd 0000:00:1d.2: new USB bus > > registered, > > > assigned > > > > bus > > > > > number 8 > > > > > > uhci_hcd 0000:00:1d.2: irq 18, io > base > > 0x00002040 > > > usb > > > > usb8: New > > > > > USB > > > > > > device found, idVendor=1d6b, > idProduct=0001 > > usb > > > usb8: New > > > > USB > > > > > device > > > > > > strings: Mfr=3, Product=2, > SerialNumber=1 > > usb usb8: > > > > Product: UHCI > > > > > Host > > > > > > > > > > References > > > > > > Visible links > > > 1. mailto:[20][21]pasik@iki.fi > > > 2. mailto:[21][22]pasik@iki.fi > > > 3. mailto:[22][23]pasik@iki.fi > > > 4. mailto:[23][24]pasik@iki.fi > > > 5. mailto:[24][25]pasik@iki.fi > > > 6. > > > [25][26]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 7. > > > [26][27]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 8. mailto:[27][28]pasik@iki.fi > > > 9. > > > [28][29]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 10. > > > [29][30]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 11. mailto:[30][31]pasik@iki.fi > > > 12. mailto:[31][32]pasik@iki.fi > > > 13. > > > [32][33]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 14. > > > [33][34]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 15. mailto:[34][35]pasik@iki.fi > > > 16. > > > [35][36]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 17. > > > [36][37]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 18. mailto:[37][38]pasik@iki.fi > > > > References > > > > Visible links > > 1. mailto:[39]pasik@iki.fi > > 2. mailto:[40]pasik@iki.fi > > 3. mailto:[41]pasik@iki.fi > > 4. mailto:[42]pasik@iki.fi > > 5. mailto:[43]pasik@iki.fi > > 6. mailto:[44]pasik@iki.fi > > 7. > [45]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 8. > [46]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 9. mailto:[47]pasik@iki.fi > > 10. > [48]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 11. > [49]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 12. mailto:[50]pasik@iki.fi > > 13. mailto:[51]pasik@iki.fi > > 14. > [52]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 15. > [53]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 16. mailto:[54]pasik@iki.fi > > 17. > [55]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 18. > [56]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 19. mailto:[57]pasik@iki.fi > > 20. mailto:[58]pasik@iki.fi > > 21. mailto:[59]pasik@iki.fi > > 22. mailto:[60]pasik@iki.fi > > 23. mailto:[61]pasik@iki.fi > > 24. mailto:[62]pasik@iki.fi > > 25. > [63]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 26. > [64]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 27. mailto:[65]pasik@iki.fi > > 28. > [66]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 29. > [67]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 30. mailto:[68]pasik@iki.fi > > 31. mailto:[69]pasik@iki.fi > > 32. > [70]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 33. > [71]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 34. mailto:[72]pasik@iki.fi > > 35. > [73]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 36. > [74]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 37. mailto:[75]pasik@iki.fi > > References > > Visible links > 1. mailto:pasik@iki.fi > 2. mailto:pasik@iki.fi > 3. mailto:pasik@iki.fi > 4. mailto:pasik@iki.fi > 5. mailto:pasik@iki.fi > 6. mailto:pasik@iki.fi > 7. mailto:pasik@iki.fi > 8. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 9. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 10. mailto:pasik@iki.fi > 11. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 12. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 13. mailto:pasik@iki.fi > 14. mailto:pasik@iki.fi > 15. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 16. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 17. mailto:pasik@iki.fi > 18. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 19. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 20. mailto:pasik@iki.fi > 21. mailto:pasik@iki.fi > 22. mailto:pasik@iki.fi > 23. mailto:pasik@iki.fi > 24. mailto:pasik@iki.fi > 25. mailto:pasik@iki.fi > 26. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 27. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 28. mailto:pasik@iki.fi > 29. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 30. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 31. mailto:pasik@iki.fi > 32. mailto:pasik@iki.fi > 33. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 34. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 35. mailto:pasik@iki.fi > 36. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 37. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 38. mailto:pasik@iki.fi > 39. mailto:pasik@iki.fi > 40. mailto:pasik@iki.fi > 41. mailto:pasik@iki.fi > 42. mailto:pasik@iki.fi > 43. mailto:pasik@iki.fi > 44. mailto:pasik@iki.fi > 45. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 46. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 47. mailto:pasik@iki.fi > 48. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 49. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 50. mailto:pasik@iki.fi > 51. mailto:pasik@iki.fi > 52. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 53. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 54. mailto:pasik@iki.fi > 55. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 56. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 57. mailto:pasik@iki.fi > 58. mailto:pasik@iki.fi > 59. mailto:pasik@iki.fi > 60. mailto:pasik@iki.fi > 61. mailto:pasik@iki.fi > 62. mailto:pasik@iki.fi > 63. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 64. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 65. mailto:pasik@iki.fi > 66. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 67. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 68. mailto:pasik@iki.fi > 69. mailto:pasik@iki.fi > 70. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 71. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 72. mailto:pasik@iki.fi > 73. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 74. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 75. mailto:pasik@iki.fi ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs() 2010-03-19 17:59 ` [Xen-devel] Re: pvops dom0 kernel: crash in print_all_ICs() Pasi Kärkkäinen @ 2010-03-19 18:22 ` Jeremy Fitzhardinge 2010-03-19 19:05 ` Pasi Kärkkäinen 2010-03-19 20:07 ` Konrad Rzeszutek Wilk 1 sibling, 1 reply; 32+ messages in thread From: Jeremy Fitzhardinge @ 2010-03-19 18:22 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: xen-devel, xen-users, kishore kumar On 03/19/2010 10:59 AM, Pasi Kärkkäinen wrote: > On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar wrote: > >> Attached is the capture log after changing the grub.conf to >> >> ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset >> initcall_debug debug swiotlb=force apic=debug loglevel=10 >> >> for the dom 0 kernel command line. >> >> > Hmm, interesting. Now it seems to crash in a different place. > > Jeremy: Have you seen this one earlier? > No, but it looks like the result of "apic=debug" on the kernel command line. That won't do anything useful (the kernel has no APICs, they all belong to Xen), and can only cause harm. As it appears to have done. J > .... IRQ redirection table: > NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: > 00 000 0 0 0 0 0 0 0 00 > IRQ to pin mappings: > BUG: unable to handle kernel NULL pointer dereference at (null) > IP: [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 > PGD 0 > Oops: 0000 [#1] SMP > last sysfs file: > CPU 0 > Modules linked in: > Pid: 1, comm: swapper Not tainted 2.6.32.10 #2 > RIP: e030:[<ffffffff819bf0e0>] [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 > RSP: e02b:ffff880064edbe20 EFLAGS: 00010286 > RAX: ffffffff816ed2c0 RBX: 0000000000000000 RCX: 000000000f640f01 > RDX: ffff880066808000 RSI: ffff880064edbd40 RDI: 0000000000000000 > RBP: ffff880064edbea0 R08: 0000000000000002 R09: 0000000000000000 > R10: 0000000000000000 R11: ffff880064edbce0 R12: 0000000000000000 > R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 > FS: 0000000000000000(0000) GS:ffff880005ec8000(0000) knlGS:0000000000000000 > CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b > CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002660 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process swapper (pid: 1, threadinfo ffff880064eda000, task ffff880064ee0000) > Stack: > ffff880000000000 ffffffff00000000 ffff880000000000 ffffffff811ebee8 > <0> ffff880064edbe60 0000000181083e7c 000000ff00000002 0000000000000002 > <0> ffff880000000000 ffffffff810846f0 ffffffff817ce660 00000000291fd332 > Call Trace: > [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e > [<ffffffff810846f0>] ? ktime_get+0x78/0x93 > [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 > [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > [<ffffffff819ae961>] kernel_init+0x172/0x1cc > [<ffffffff81013eaa>] child_rip+0xa/0x20 > [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > [<ffffffff81013810>] ? restore_args+0x0/0x30 > [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 > [<ffffffff81013ea0>] ? child_rip+0x0/0x20 > Code: 45 b0 0f 8c 5b fd ff ff 48 c7 c7 34 40 60 81 31 c0 45 31 e4 e8 11 d5 69 ff 31 ff e8 67 b5 6f ff eb 5a 48 85 c0 74 4a 48 8b 58 40<48> 83 3b 00 74 40 44 89 e6 48 c7 c7 4d 40 60 81 31 c0 e8 e8 d4 > RIP [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 > RSP<ffff880064edbe20> > CR2: 0000000000000000 > ---[ end trace 0007ad9d59420718 ]--- > swapper used greatest stack depth: 4168 bytes left > Kernel panic - not syncing: Attempted to kill init! > Pid: 1, comm: swapper Tainted: G D 2.6.32.10 #2 > Call Trace: > [<ffffffff8105b747>] panic+0xa5/0x167 > [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf > [<ffffffff8105f2b3>] ? do_exit+0x38a/0x701 > [<ffffffff8100f43f>] ? xen_restore_fl_direct_end+0x0/0x1 > [<ffffffff8108f823>] ? lock_release+0x179/0x184 > [<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf > [<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c > [<ffffffff8105efa7>] do_exit+0x7e/0x701 > [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef > [<ffffffff8147764c>] oops_end+0xbf/0xc7 > [<ffffffff81038a02>] no_context+0x1f1/0x200 > [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef > [<ffffffff81038c61>] __bad_area_nosemaphore+0x191/0x1b4 > [<ffffffff8100f452>] ? check_events+0x12/0x20 > [<ffffffff81038d0e>] bad_area_nosemaphore+0x13/0x15 > [<ffffffff81478b20>] do_page_fault+0x16d/0x2a2 > [<ffffffff814769d5>] page_fault+0x25/0x30 > [<ffffffff819bf0e0>] ? print_all_ICs+0x487/0x500 > [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e > [<ffffffff810846f0>] ? ktime_get+0x78/0x93 > [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 > [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > [<ffffffff819ae961>] kernel_init+0x172/0x1cc > [<ffffffff81013eaa>] child_rip+0xa/0x20 > [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > [<ffffffff81013810>] ? restore_args+0x0/0x30 > [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 > [<ffffffff81013ea0>] ? child_rip+0x0/0x20 > > > -- Pasi > > > >> >> On Thu, Mar 18, 2010 at 2:27 PM, Pasi Kärkkäinen<[1]pasik@iki.fi> wrote: >> >> On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar wrote: >> > pvdisplay does not work in my RHEL machine. >> > >> > I did pvscan. >> > below is the output. >> > >> > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free] >> > >> > Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no VG: 0 [0 ] >> > >> >> Ok so /dev/sda2 is the correct device holding the VolGroup01. >> >> Looking at your latest capture.doc I see this: >> >> Command line: ro root=/dev/vg00/lv01 console=hvc0 earlyprintk=xen >> nomodeset initcall_debug debug swiotlb=force apic=debug loglevel=10 >> >> So your root= parameter is wrong! Edit grub.conf and replace it with the >> actual root device: >> root=/dev/VolGroup01/LogVol00 >> >> -- Pasi >> >> > On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen >> <[1][2]pasik@iki.fi> wrote: >> > >> > On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore kumar wrote: >> > > I did the below steps for pvops dom 0 kernel. >> > > >> > > make menuconfig >> > > make bzImage >> > > make modules >> > > make modules_install >> > > cp -a .config /boot/config-2.6.32.10 >> > > cp -a System.map /boot/System.map-2.6.32.10 >> > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10 >> > > /sbin/mkinitrd -f --builtin=ahci /boot/initrd-2.6.32.10.img >> > 2.6.32.10 >> > > I tried root=/dev/VolGroup01/LogVol00 . >> > > >> > >> > Ok. >> > >> > Please run "pvdisplay" to see which actual partition is the LVM >> PV for >> > your >> > volume group. >> > >> > Also if you're running Fedora 12 you could try generating an >> initrd >> > image >> > with dracut instead of mkinitrd. >> > >> > -- Pasi >> > >> > > >> > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen >> > <[1][2][3]pasik@iki.fi> wrote: >> > > >> > > On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore kumar >> wrote: >> > > > Here is the output of df -h and cat /etc/fstab of my >> > machine. >> > > > >> > > >> > > Did you try both root=/dev/mapper/VolGroup01-LogVol00 and >> > > root=/dev/VolGroup01/LogVol00 arguments for the dom0 >> kernel? >> > > >> > > How did you generate the initrd image for the dom0 kernel? >> > > >> > > Anyway this sounds like a grub.conf or initrd problem, not >> Xen or >> > pvops >> > > dom0 kernel kernel problem. >> > > >> > > -- Pasi >> > > >> > > > Please let me know your thoughts. >> > > > >> > > > [root@localhost kishore]# df -h >> > > > >> > > > Filesystem Size Used Avail Use% Mounted on >> > > > >> > > > /dev/mapper/VolGroup01-LogVol00 >> > > > >> > > > 223G 29G 182G 14% >> / >> > > > >> > > > /dev/sda1 99M 81M 13M 87% /boot >> > > > >> > > > tmpfs 757M 0 757M 0% /dev/shm >> > > > >> > > > [root@localhost kishore]# cat /etc/fstab >> > > > >> > > > /dev/VolGroup01/LogVol00 / ext3 defaults 1 1 >> > > > >> > > > LABEL=/boot /boot ext3 defaults 1 2 >> > > > >> > > > tmpfs /dev/shm tmpfs defaults 0 0 >> > > > >> > > > devpts /dev/pts devpts gid=5,mode=620 0 0 >> > > > >> > > > sysfs /sys sysfs defaults 0 0 >> > > > >> > > > proc /proc proc defaults 0 0 >> > > > >> > > > /dev/VolGroup01/LogVol01 swap swap defaults 0 0 >> > > > >> > > > [root@localhost kishore]# >> > > > >> > > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen >> > > <[1][2][3][4]pasik@iki.fi> wrote: >> > > > >> > > > On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore >> kumar >> > wrote: >> > > > > I am not sure. Can you please let me know how >> to >> > check >> > > this? any >> > > > command >> > > > > ?? >> > > > >> > > > well simple "df -h" will show it. and also "cat >> > /etc/fstab". >> > > > You can also check it from your grub >> configuration.. from >> > the >> > > working >> > > > baremetal (non-Xen) entry. >> > > > >> > > > -- Pasi >> > > > > >> > > > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi >> Kärkkäinen >> > > > <[1][2][3][4][5]pasik@iki.fi> wrote: >> > > > > >> > > > > On Tue, Mar 16, 2010 at 03:22:50PM -0700, >> kishore >> > kumar >> > > wrote: >> > > > > > attached is the log captured in with >> the word >> > > document . >> > > > > > >> > > > > >> > > > > Scanning logical volumes >> > > > > Reading all physical volumes. This may >> take a >> > while... >> > > > > Activating logical volumes >> > > > > Volume group "VolGroup01" not found >> > > > > Trying to resume from >> /dev/VolGroup01/LogVol01 >> > > > > Unable to access resume device >> > (/dev/VolGroup01/LogVol01) >> > > > > Creating root device. >> > > > > Mounting root filesystem. >> > > > > mount: could not find filesystem '/dev/root' >> > > > > Setting up other filesystems. >> > > > > Setting up new root fs >> > > > > setuproot: moving /dev failed: No such file >> or >> > directory >> > > > > no fstab.sys, mounting internal defaults >> > > > > setuproot: error mounting /proc: No such >> file or >> > directory >> > > > > setuproot: error mounting /sys: No such file >> or >> > directory >> > > > > Switching to new root and running init. >> > > > > unmounting old /dev >> > > > > unmounting old /proc >> > > > > unmounting old /sys >> > > > > switchroot: mount failed: No such file or >> directory >> > > > > init used greatest stack depth: 4088 bytes >> left >> > > > > Kernel panic - not syncing: Attempted to >> kill init! >> > > > > >> > > > > So it seems it gets all the way to executing >> the >> > initrd >> > > image, >> > > > > which then fails to mount the root fs. >> > > > > >> > > > > Earlier in the log: >> > > > > ata1: SATA link up 3.0 Gbps (SStatus 123 >> SControl >> > 300) >> > > > > ata1.00: ATA-8: Hitachi HDT721025SLA380, >> STBOA3AA, >> > max >> > > UDMA/133 >> > > > > ata1.00: 488397168 sectors, multi 0: LBA48 >> NCQ >> > (depth >> > > 31/32), AA >> > > > > ata1.00: configured for UDMA/133 >> > > > > scsi 0:0:0:0: Direct-Access ATA >> Hitachi >> > HDT72102 >> > > STBO >> > > > PQ: 0 >> > > > > ANSI: 5 >> > > > > sd 0:0:0:0: Attached scsi generic sg0 type 0 >> > > > > sd 0:0:0:0: [sda] 488397168 512-byte logical >> > blocks: (250 >> > > GB/232 >> > > > GiB) >> > > > > sd 0:0:0:0: [sda] Write Protect is off >> > > > > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >> > > > > sd 0:0:0:0: [sda] Write cache: enabled, read >> cache: >> > > enabled, >> > > > doesn't >> > > > > support DPO or FUA >> > > > > sda: sda1 sda2 >> > > > > sd 0:0:0:0: [sda] Attached SCSI disk >> > > > > >> > > > > so /dev/sda was detected. Is your root lvm >> volume >> > on >> > > /dev/sda ? >> > > > > Is /dev/VolGroup01/LogVol01 really your root >> fs? >> > > > > >> > > > > -- Pasi >> > > > > >> > > > > > >> > > > > > >> > > > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi >> > Kärkkäinen >> > > > > <[1][2][3][4][5][6]pasik@iki.fi> wrote: >> > > > > > >> > > > > > On Tue, Mar 16, 2010 at 02:56:06PM >> -0700, >> > kishore >> > > kumar >> > > > wrote: >> > > > > > > Please find the attached log >> file after >> > fixing >> > > the >> > > > dom 0 >> > > > > kernel cmd >> > > > > > line >> > > > > > > as below >> > > > > > > >> > > > > > > ro root=/dev/VolGroup01/LogVol00 >> > console=hvc0 >> > > > > earlyprintk=xen >> > > > > > nomodeset >> > > > > > > >> > > > > > >> > > > > > There's something wrong with the log, >> the >> > dom0 >> > > kernel >> > > > parts are >> > > > > all on >> > > > > > one line.. >> > > > > > It's really difficult to read it. >> > > > > > >> > > > > > -- Pasi >> > > > > > >> > > > > > > Thanks >> > > > > > > >> > > > > > > >> > > > > > > On Tue, Mar 16, 2010 at 2:29 PM, >> Pasi >> > > Kärkkäinen >> > > > > > <[1][2][3][4][5][6][7]pasik@iki.fi> >> wrote: >> > > > > > > >> > > > > > > On Tue, Mar 16, 2010 at >> 02:16:22PM >> > -0700, >> > > kishore >> > > > kumar >> > > > > wrote: >> > > > > > > > I did below steps. >> > > > > > > > >> > > > > > > > >> > > > > > > > I pulled DOM 0 kernel >> from >> > > > > > > > git clone >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > >> > >> git://[1][2][3][4][5][6][7][8]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > > > > > > > linux-2.6-xen >> > > > > > > > >> > > > > > > > cd linux-2.6-xen >> > > > > > > > >> > > > > > > > make clean >> > > > > > > > >> > > > > > > > cp -a .config .config-old >> > > > > > > > >> > > > > > > > wget -O .config >> > > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > >> > >> [2][3][4][5][6][7][8][9]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > > > > > > > >> > > > > > > > make oldconfig >> > > > > > > > >> > > > > > > > make bzImage >> > > > > > > > >> > > > > > > > make modules >> > > > > > > > >> > > > > > > > make modules_install >> > > > > > > > >> > > > > > > > cp -a .config >> > /boot/config-2.6.32.9 >> > > > > > > > >> > > > > > > > cp -a System.map >> > > /boot/System.map-2.6.32.9 >> > > > > > > > >> > > > > > > > cp -a >> arch/x86/boot/bzImage >> > > > /boot/vmlinuz-2.6.32.9 >> > > > > > > > >> > > > > > > > and modified the >> grub.conf as >> > below >> > > > > > > > >> > > > > > > > >> > > > > > > > Root(hd0,0) >> > > > > > > > >> > > > > > > > kernel /xen.gz >> console=vga,com1 >> > > > com1=115200,8n1 >> > > > > msi=1 >> > > > > > iommu=1 >> > > > > > > > >> > > > > > > > module /vmlinuz-2.6.32.9 >> ro >> > > > > root=/dev/VolGroup01/LogVo100 >> > > > > > rhgb >> > > > > > > quiet >> > > > > > > > >> > > > > > > > module >> /initrd-2.6.32.9.img >> > > > > > > > >> > > > > > > > >> > > > > > > > and rebooted the machine. >> Then >> > It >> > > booted with >> > > > some >> > > > > xen >> > > > > > messages >> > > > > > > and >> > > > > > > > stopped. Those were the >> > messages >> > > captured >> > > > from >> > > > > serial >> > > > > > console. >> > > > > > > > >> > > > > > > > Please let me know if I >> did >> > something >> > > wrong >> > > > here. >> > > > > > > > >> > > > > > > >> > > > > > > Please fix the kernel cmdline >> based >> > on my >> > > earlier >> > > > email, >> > > > > and >> > > > > > capture and >> > > > > > > post the >> > > > > > > serial console log again! >> > > > > > > >> > > > > > > -- Pasi >> > > > > > > > >> > > > > > > > >> > > > > > > > On Tue, Mar 16, 2010 at >> 1:20 PM, >> > Pasi >> > > > Kärkkäinen >> > > > > > > >> <[3][4][5][6][7][8][9][10]pasik@iki.fi> >> > wrote: >> > > > > > > > >> > > > > > > > On Tue, Mar 16, 2010 at >> > 01:16:28PM >> > > -0700, >> > > > Jeremy >> > > > > > Fitzhardinge >> > > > > > > wrote: >> > > > > > > > > On 03/16/2010 12:48 >> PM, Pasi >> > > Kärkkäinen >> > > > wrote: >> > > > > > > > >> On Tue, Mar 16, 2010 >> at >> > 09:43:44PM >> > > +0200, >> > > > Pasi >> > > > > > Kärkkäinen >> > > > > > > wrote: >> > > > > > > > >> >> > > > > > > > >>> On Tue, Mar 16, >> 2010 at >> > > 10:32:17AM >> > > > -0700, >> > > > > kishore >> > > > > > kumar >> > > > > > > wrote: >> > > > > > > > >>> >> > > > > > > > >>>> Attached is >> the >> > output >> > > captured >> > > > from >> > > > > serial >> > > > > > console. >> > > > > > > > >>>> >> > > > > > > > >>>> Machine does >> not boot >> > after >> > > > compiling xen >> > > > > 3.4.3 >> > > > > > with >> > > > > > > pv_ops dom >> > > > > > > > 0 kernel. >> > > > > > > > >>>> >> > > > > > > > >>>> Please let me >> know >> > what is >> > > going >> > > > wrong >> > > > > here. >> > > > > > > > >>>> >> > > > > > > > >>>> >> > > > > > > > >>> Ok this looks like >> a bug >> > that is >> > > already >> > > > being >> > > > > sorted >> > > > > > out on >> > > > > > > > xen-devel mailinglist. >> > > > > > > > >>> I added CC to >> xen-devel. >> > > > > > > > >>> >> > > > > > > > >>> >> > > > > > > > >> >> > > > > > > > > >> > > > > > > > > Those messages are >> not a >> > problem in >> > > > themselves, >> > > > > but the >> > > > > > related >> > > > > > > > problem >> > > > > > > > > is believed to be >> fixed in >> > current >> > > > > xen/stable-2.6.32.x. >> > > > > > It >> > > > > > > looks like >> > > > > > > > > the output stops >> there >> > because the >> > > Xen >> > > > console >> > > > > isn't set >> > > > > > up >> > > > > > > properly >> > > > > > > > for >> > > > > > > > > some reason. >> > > > > > > > > >> > > > > > > > >> > > > > > > > Yeah, remove "rhgb >> quiet" from >> > the >> > > options.. >> > > > the >> > > > > dom0 >> > > > > > kernel >> > > > > > > cmdline >> > > > > > > > should be like this: >> > > > > > > > ro >> > root=/dev/VolGroup01/LogVol00 >> > > > console=hvc0 >> > > > > > earlyprintk=xen >> > > > > > > nomodeset >> > > > > > > > -- Pasi >> > > > > > > > >> > > > > > > > References >> > > > > > > > >> > > > > > > > Visible links >> > > > > > > > 1. >> > > > > > >> > > > > >> > > > >> > > >> > >> [5][6][7][8][9][10][11]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > > > > > > > 2. >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > >> > >> [6][7][8][9][10][11][12]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > > > > > > > 3. >> > mailto:[7][8][9][10][11][12][13]pasik@iki.fi >> > > > > > > >> > > > > > > References >> > > > > > > >> > > > > > > Visible links >> > > > > > > 1. >> > mailto:[9][10][11][12][13][14]pasik@iki.fi >> > > > > > > 2. >> > > > > > >> > > > > >> > > > >> > > >> > >> [10][11][12][13][14][15]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > > > > > > 3. >> > > > > > >> > > > > >> > > > >> > > >> > >> [11][12][13][14][15][16]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > > > > > > 4. >> > mailto:[12][13][14][15][16][17]pasik@iki.fi >> > > > > > > 5. >> > > > > > >> > > > > >> > > > >> > > >> > >> [13][14][15][16][17][18]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > > > > > > 6. >> > > > > > >> > > > > >> > > > >> > > >> > >> [14][15][16][17][18][19]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > > > > > > 7. >> > mailto:[15][16][17][18][19][20]pasik@iki.fi >> > > > > > > Asserting Post complete GPIO!!! >> > > > > > > Transfer control to CSM 16-bit >> binary for >> > legacy >> > > boot >> > > > > > > __ __ _____ _ _ >> _____ >> > > _ _ >> > > > > > > \ \/ /___ _ __ |___ /| || | >> |___ / >> > _ __ >> > > ___| || | >> > > > _ >> > > > > __ _ >> > > > > > __ ___ >> > > > > > > \ // _ \ '_ \ |_ \| || |_ >> |_ \ __| >> > '__/ >> > > __| || >> > > > |_ __| >> > > > > '_ \| >> > > > > > '__/ _ \ >> > > > > > > / \ __/ | | | ___) |__ _| >> ___) |__| >> > | | >> > > (__|__ >> > > > _|__| >> > > > > |_) | | >> > > > > > | __/ >> > > > > > > /_/\_\___|_| |_| |____(_) >> |_|(_)____/ >> > |_| >> > > \___| |_| >> > > > | >> > > > > .__/|_| >> > > > > > \___| >> > > > > > > >> > > > |_| >> > > > > > > (XEN) Xen version 3.4.3-rc4-pre >> > > (kishore@localdomain) >> > > > (gcc >> > > > > version >> > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) >> Mon Mar >> > 15 >> > > 13:44:31 PDT >> > > > 2010 >> > > > > > > (XEN) Latest ChangeSet: Tue Mar 09 >> > 18:15:52 2010 >> > > +0000 >> > > > > > 19924:6e72f8c3c017 >> > > > > > > (XEN) Command line: >> console=vga,com1 >> > > com1=115200,8n1 >> > > > msi=1 >> > > > > iommu=1 >> > > > > > > (XEN) Video information: >> > > > > > > (XEN) VGA is text mode 80x25, font >> 8x16 >> > > > > > > (XEN) VBE/DDC methods: none; EDID >> > transfer time: >> > > 0 >> > > > seconds >> > > > > > > (XEN) EDID info not retrieved >> because no >> > DDC >> > > retrieval >> > > > method >> > > > > > detected >> > > > > > > (XEN) Disc information: >> > > > > > > (XEN) Found 1 MBR signatures >> > > > > > > (XEN) Found 1 EDD information >> structures >> > > > > > > (XEN) Xen-e820 RAM map: >> > > > > > > (XEN) 0000000000000000 - >> 000000000009d000 >> > > (usable) >> > > > > > > (XEN) 000000000009d000 - >> 00000000000a0000 >> > > (reserved) >> > > > > > > (XEN) 00000000000e0000 - >> 0000000000100000 >> > > (reserved) >> > > > > > > (XEN) 0000000000100000 - >> 000000006d597000 >> > > (usable) >> > > > > > > (XEN) 000000006d597000 - >> 000000006d686000 >> > > (reserved) >> > > > > > > (XEN) 000000006d686000 - >> 000000006f598000 >> > > (usable) >> > > > > > > (XEN) 000000006f598000 - >> 000000006f59a000 >> > > (reserved) >> > > > > > > (XEN) 000000006f59a000 - >> 000000006f5af000 >> > (ACPI >> > > NVS) >> > > > > > > (XEN) 000000006f5af000 - >> 000000006f5d9000 >> > > (reserved) >> > > > > > > (XEN) 000000006f5d9000 - >> 000000006f5f9000 >> > (ACPI >> > > data) >> > > > > > > (XEN) 000000006f5f9000 - >> 000000006f6df000 >> > (ACPI >> > > NVS) >> > > > > > > (XEN) 000000006f6df000 - >> 000000006f700000 >> > (ACPI >> > > data) >> > > > > > > (XEN) 000000006f700000 - >> 0000000080000000 >> > > (reserved) >> > > > > > > (XEN) 00000000a0000000 - >> 00000000b0000000 >> > > (reserved) >> > > > > > > (XEN) 00000000fc000000 - >> 00000000fd000000 >> > > (reserved) >> > > > > > > (XEN) 00000000fed1c000 - >> 00000000fed20000 >> > > (reserved) >> > > > > > > (XEN) 00000000ffc00000 - >> 0000000100000000 >> > > (reserved) >> > > > > > > (XEN) System RAM: 1780MB >> (1823000kB) >> > > > > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 >> INTEL >> > ) >> > > > > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 >> INTEL >> > THRLY >> > > > 0 >> > > > > > 1000013) >> > > > > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 >> INTEL >> > THRLY >> > > > 0 >> > > > > MSFT >> > > > > > 100000D) >> > > > > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 >> INTEL >> > THRLY >> > > > 3 >> > > > > MSFT >> > > > > > 100000D) >> > > > > > > (XEN) ACPI: FACS 6F5F9000, 0040 >> > > > > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 >> INTEL >> > THRLY >> > > > 0 >> > > > > MSFT >> > > > > > 100000D) >> > > > > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 >> INTEL >> > THRLY >> > > > 1 >> > > > > MSFT >> > > > > > 100000D) >> > > > > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 >> INTEL >> > THRLY >> > > > 1 >> > > > > MSFT >> > > > > > 100000D) >> > > > > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 >> INTEL >> > THRLY >> > > > 1 >> > > > > MSFT >> > > > > > 100000D) >> > > > > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 >> INTEL >> > THRLY >> > > > 0 >> > > > > MSFT >> > > > > > 100000D) >> > > > > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC >> (r1 >> > INTEL SSDT >> > > PM >> > > > 4000 >> > > > > INTL >> > > > > > 20061109) >> > > > > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 >> INTEL >> > THRLY >> > > > 1 >> > > > > MSFT >> > > > > > 100000D) >> > > > > > > (XEN) Domain heap initialised >> > > > > > > (XEN) Processor #0 6:12 APIC >> version 21 >> > > > > > > (XEN) Processor #2 6:12 APIC >> version 21 >> > > > > > > (XEN) Processor #4 6:12 APIC >> version 21 >> > > > > > > (XEN) Processor #16 6:12 APIC >> version 21 >> > > > > > > (XEN) Processor #18 6:12 APIC >> version 21 >> > > > > > > (XEN) Processor #20 6:12 APIC >> version 21 >> > > > > > > (XEN) Processor #1 6:12 APIC >> version 21 >> > > > > > > (XEN) Processor #3 6:12 APIC >> version 21 >> > > > > > > (XEN) Processor #5 6:12 APIC >> version 21 >> > > > > > > (XEN) Processor #17 6:12 APIC >> version 21 >> > > > > > > (XEN) Processor #19 6:12 APIC >> version 21 >> > > > > > > (XEN) Processor #21 6:12 APIC >> version 21 >> > > > > > > (XEN) IOAPIC[0]: apic_id 8, version >> 32, >> > address >> > > > 0xfec00000, GSI >> > > > > 0-23 >> > > > > > > (XEN) IOAPIC[1]: apic_id 9, version >> 32, >> > address >> > > > 0xfec90000, GSI >> > > > > 24-47 >> > > > > > > (XEN) Enabling APIC mode: Phys. >> Using 2 >> > I/O >> > > APICs >> > > > > > > (XEN) Intel VT-d DMAR tables have >> been >> > parsed. >> > > > > > > (XEN) Using scheduler: SMP Credit >> > Scheduler >> > > (credit) >> > > > > > > (XEN) Detected 3200.207 MHz >> processor. >> > > > > > > (XEN) VMX: Supported advanced >> features: >> > > > > > > (XEN) - APIC MMIO access >> virtualisation >> > > > > > > (XEN) - APIC TPR shadow >> > > > > > > (XEN) - Extended Page Tables (EPT) >> > > > > > > (XEN) - Virtual-Processor >> Identifiers >> > (VPID) >> > > > > > > (XEN) - Virtual NMI >> > > > > > > (XEN) - MSR direct-access bitmap >> > > > > > > (XEN) VMX: EPT is available. >> > > > > > > (XEN) VMX: VPID is available. >> > > > > > > (XEN) HVM: VMX enabled >> > > > > > > (XEN) HVM: Hardware Assisted Paging >> > detected. >> > > > > > > (XEN) CPU0: Intel Genuine Intel(R) >> CPU >> > > 000 >> > > > @ >> > > > > 3.20GHz >> > > > > > stepping 00 >> > > > > > > (XEN) Booting processor 1/2 eip >> 88000 >> > > > > > > (XEN) CPU1: Intel Genuine Intel(R) >> CPU >> > > 000 >> > > > @ >> > > > > 3.20GHz >> > > > > > stepping 00 >> > > > > > > (XEN) Booting processor 2/4 eip >> 88000 >> > > > > > > (XEN) CPU2: Intel Genuine Intel(R) >> CPU >> > > 000 >> > > > @ >> > > > > 3.20GHz >> > > > > > stepping 00 >> > > > > > > (XEN) Booting processor 3/16 eip >> 88000 >> > > > > > > (XEN) CPU3: Intel Genuine Intel(R) >> CPU >> > > 000 >> > > > @ >> > > > > 3.20GHz >> > > > > > stepping 00 >> > > > > > > (XEN) Booting processor 4/18 eip >> 88000 >> > > > > > > (XEN) CPU4: Intel Genuine Intel(R) >> CPU >> > > 000 >> > > > @ >> > > > > 3.20GHz >> > > > > > stepping 00 >> > > > > > > (XEN) Booting processor 5/20 eip >> 88000 >> > > > > > > (XEN) CPU5: Intel Genuine Intel(R) >> CPU >> > > 000 >> > > > @ >> > > > > 3.20GHz >> > > > > > stepping 00 >> > > > > > > (XEN) Booting processor 6/1 eip >> 88000 >> > > > > > > (XEN) CPU6: Intel Genuine Intel(R) >> CPU >> > > 000 >> > > > @ >> > > > > 3.20GHz >> > > > > > stepping 00 >> > > > > > > (XEN) Booting processor 7/3 eip >> 88000 >> > > > > > > (XEN) CPU7: Intel Genuine Intel(R) >> CPU >> > > 000 >> > > > @ >> > > > > 3.20GHz >> > > > > > stepping 00 >> > > > > > > (XEN) Booting processor 8/5 eip >> 88000 >> > > > > > > (XEN) CPU8: Intel Genuine Intel(R) >> CPU >> > > 000 >> > > > @ >> > > > > 3.20GHz >> > > > > > stepping 00 >> > > > > > > (XEN) Booting processor 9/17 eip >> 88000 >> > > > > > > (XEN) CPU9: Intel Genuine Intel(R) >> CPU >> > > 000 >> > > > @ >> > > > > 3.20GHz >> > > > > > stepping 00 >> > > > > > > (XEN) Booting processor 10/19 eip >> 88000 >> > > > > > > (XEN) CPU10: Intel Genuine Intel(R) >> CPU >> > > 000 >> > > > @ >> > > > > 3.20GHz >> > > > > > stepping 00 >> > > > > > > (XEN) Booting processor 11/21 eip >> 88000 >> > > > > > > (XEN) CPU11: Intel Genuine Intel(R) >> CPU >> > > 000 >> > > > @ >> > > > > 3.20GHz >> > > > > > stepping 00 >> > > > > > > (XEN) Total of 12 processors >> activated. >> > > > > > > (XEN) ENABLING IO-APIC IRQs >> > > > > > > (XEN) -> Using new ACK method >> > > > > > > (XEN) checking TSC synchronization >> across >> > 12 >> > > CPUs: >> > > > passed. >> > > > > > > (XEN) Platform timer is 14.318MHz >> HPET >> > > > > > > ?(XEN) Brought up 12 CPUs >> > > > > > > (XEN) Intel VT-d Snoop Control >> supported. >> > > > > > > (XEN) Intel VT-d DMA Passthrough >> not >> > supported. >> > > > > > > (XEN) Intel VT-d Queued >> Invalidation >> > supported. >> > > > > > > (XEN) Intel VT-d Interrupt >> Remapping >> > supported. >> > > > > > > (XEN) I/O virtualisation enabled >> > > > > > > (XEN) I/O virtualisation for PV >> guests >> > disabled >> > > > > > > (XEN) xenoprof: Initialization >> failed. >> > Intel >> > > processor >> > > > model 44 >> > > > > for P6 >> > > > > > class family is not supported >> > > > > > > (XEN) *** LOADING DOMAIN 0 *** >> > > > > > > (XEN) Xen kernel: 64-bit, lsb, >> compat32 >> > > > > > > (XEN) Dom0 kernel: 64-bit, PAE, >> lsb, >> > paddr >> > > 0x1000000 -> >> > > > > 0x26bb000 >> > > > > > > (XEN) PHYSICAL MEMORY ARRANGEMENT: >> > > > > > > (XEN) Dom0 alloc.: >> > > 0000000064000000->0000000068000000 >> > > > > (404490 pages >> > > > > > to be allocated) >> > > > > > > (XEN) VIRTUAL MEMORY ARRANGEMENT: >> > > > > > > (XEN) Loaded kernel: >> > > ffffffff81000000->ffffffff826bb000 >> > > > > > > (XEN) Init. ramdisk: >> > > ffffffff826bb000->ffffffff82d0d800 >> > > > > > > (XEN) Phys-Mach map: >> > > ffffffff82d0e000->ffffffff83044050 >> > > > > > > (XEN) Start info: >> > > ffffffff83045000->ffffffff830454b4 >> > > > > > > (XEN) Page tables: >> > > ffffffff83046000->ffffffff83063000 >> > > > > > > (XEN) Boot stack: >> > > ffffffff83063000->ffffffff83064000 >> > > > > > > (XEN) TOTAL: >> > > ffffffff80000000->ffffffff83400000 >> > > > > > > (XEN) ENTRY ADDRESS: >> ffffffff819c1200 >> > > > > > > (XEN) Dom0 has maximum 12 VCPUs >> > > > > > > (XEN) Scrubbing Free RAM: .done. >> > > > > > > (XEN) Xen trace buffers: disabled >> > > > > > > (XEN) Std. Loglevel: Errors and >> warnings >> > > > > > > (XEN) Guest Loglevel: Nothing >> > (Rate-limited: >> > > Errors and >> > > > > warnings) >> > > > > > > (XEN) Xen is relinquishing VGA >> console. >> > > > > > > (XEN) *** Serial input -> DOM0 >> (type >> > 'CTRL-a' >> > > three >> > > > times to >> > > > > switch >> > > > > > input to Xen) >> > > > > > > (XEN) Freed 128kB init memory. >> > > > > > > mapping kernel into physical memory >> > > > > > > Xen: setup ISA identity maps >> > > > > > > about to get started... >> > > > > > > Initializing cgroup subsys cpuset >> > > > > > > Initializing cgroup subsys cpu >> > > > > > > Linux version 2.6.32.9 >> > > (kishore@localhost.localdomain) >> > > > (gcc >> > > > > version >> > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 >> SMP >> > Mon Mar >> > > 15 >> > > > 15:16:28 PDT >> > > > > 2010 >> > > > > > > Command line: ro >> > root=/dev/VolGroup01/LogVol00 >> > > > console=hvc0 >> > > > > > earlyprintk=xen nomodeset >> > > > > > > KERNEL supported cpus: >> > > > > > > Intel GenuineIntel >> > > > > > > AMD AuthenticAMD >> > > > > > > Centaur CentaurHauls >> > > > > > > BIOS-provided physical RAM map: >> > > > > > > Xen: 0000000000000000 - >> 000000000009d000 >> > > (usable) >> > > > > > > Xen: 000000000009d000 - >> 0000000000100000 >> > > (reserved) >> > > > > > > Xen: 0000000000100000 - >> 0000000066c0a000 >> > > (usable) >> > > > > > > Xen: 000000006d597000 - >> 000000006d686000 >> > > (reserved) >> > > > > > > Xen: 000000006f598000 - >> 000000006f59a000 >> > > (reserved) >> > > > > > > Xen: 000000006f59a000 - >> 000000006f5af000 >> > (ACPI >> > > NVS) >> > > > > > > Xen: 000000006f5af000 - >> 000000006f5d9000 >> > > (reserved) >> > > > > > > Xen: 000000006f5d9000 - >> 000000006f5f9000 >> > (ACPI >> > > data) >> > > > > > > Xen: 000000006f5f9000 - >> 000000006f6df000 >> > (ACPI >> > > NVS) >> > > > > > > Xen: 000000006f6df000 - >> 000000006f700000 >> > (ACPI >> > > data) >> > > > > > > Xen: 000000006f700000 - >> 0000000080000000 >> > > (reserved) >> > > > > > > Xen: 00000000a0000000 - >> 00000000b0000000 >> > > (reserved) >> > > > > > > Xen: 00000000fc000000 - >> 00000000fd000000 >> > > (reserved) >> > > > > > > Xen: 00000000fed1c000 - >> 00000000fed20000 >> > > (reserved) >> > > > > > > Xen: 00000000ffc00000 - >> 0000000100000000 >> > > (reserved) >> > > > > > > bootconsole [xenboot0] enabled >> > > > > > > DMI 2.4 present. >> > > > > > > last_pfn = 0x66c0a max_arch_pfn = >> > 0x400000000 >> > > > > > > init_memory_mapping: >> > > 0000000000000000-0000000066c0a000 >> > > > > > > RAMDISK: 026bb000 - 02d0d800 >> > > > > > > ACPI: RSDP 00000000000f03f0 00024 >> (v02 >> > INTEL ) >> > > > > > > ACPI: XSDT 000000006f6fe120 00064 >> (v01 >> > INTEL >> > > THRLY >> > > > 00000000 >> > > > > > 01000013) >> > > > > > > ACPI: FACP 000000006f6fd000 000F4 >> (v04 >> > INTEL >> > > THRLY >> > > > 00000000 >> > > > > MSFT >> > > > > > 0100000D) >> > > > > > > ACPI: DSDT 000000006f6f5000 074F1 >> (v02 >> > INTEL >> > > THRLY >> > > > 00000003 >> > > > > MSFT >> > > > > > 0100000D) >> > > > > > > ACPI: FACS 000000006f5f9000 00040 >> > > > > > > ACPI: APIC 000000006f6f4000 001CC >> (v02 >> > INTEL >> > > THRLY >> > > > 00000000 >> > > > > MSFT >> > > > > > 0100000D) >> > > > > > > ACPI: MCFG 000000006f6f3000 0003C >> (v01 >> > INTEL >> > > THRLY >> > > > 00000001 >> > > > > MSFT >> > > > > > 0100000D) >> > > > > > > ACPI: HPET 000000006f6f2000 00038 >> (v01 >> > INTEL >> > > THRLY >> > > > 00000001 >> > > > > MSFT >> > > > > > 0100000D) >> > > > > > > ACPI: SLIT 000000006f6f1000 00030 >> (v01 >> > INTEL >> > > THRLY >> > > > 00000001 >> > > > > MSFT >> > > > > > 0100000D) >> > > > > > > ACPI: WDDT 000000006f6f0000 00040 >> (v01 >> > INTEL >> > > THRLY >> > > > 00000000 >> > > > > MSFT >> > > > > > 0100000D) >> > > > > > > ACPI: SSDT 000000006f5d9000 1FDDC >> (v01 >> > INTEL >> > > SSDT PM >> > > > 00004000 >> > > > > INTL >> > > > > > 20061109) >> > > > > > > ACPI: 000000006f6ee000 001D0 >> (v01 >> > INTEL >> > > THRLY >> > > > 00000001 >> > > > > MSFT >> > > > > > 0100000D) >> > > > > > > No NUMA configuration found >> > > > > > > Faking a node at >> > > 0000000000000000-0000000066c0a000 >> > > > > > > Bootmem setup node 0 >> > > 0000000000000000-0000000066c0a000 >> > > > > > > NODE_DATA [0000000000008000 - >> > 000000000001ffff] >> > > > > > > bootmap [0000000000020000 - >> > 000000000002cd87] >> > > pages d >> > > > > > > (9 early reservations) ==> bootmem >> > [0000000000 - >> > > > 0066c0a000] >> > > > > > > #0 [0000000000 - 0000001000] >> BIOS data >> > page >> > > ==> >> > > > [0000000000 >> > > > > - >> > > > > > 0000001000] >> > > > > > > #1 [0003046000 - 0003063000] >> XEN >> > PAGETABLES >> > > ==> >> > > > [0003046000 >> > > > > - >> > > > > > 0003063000] >> > > > > > > #2 [0000006000 - 0000008000] >> > TRAMPOLINE >> > > ==> >> > > > [0000006000 >> > > > > - >> > > > > > 0000008000] >> > > > > > > #3 [0001000000 - 000269ae98] >> TEXT >> > DATA BSS >> > > ==> >> > > > [0001000000 >> > > > > - >> > > > > > 000269ae98] >> > > > > > > #4 [00026bb000 - 0002d0d800] >> > RAMDISK >> > > ==> >> > > > [00026bb000 >> > > > > - >> > > > > > 0002d0d800] >> > > > > > > #5 [0002d0e000 - 0003046000] >> XEN START >> > INFO >> > > ==> >> > > > [0002d0e000 >> > > > > - >> > > > > > 0003046000] >> > > > > > > #6 [000269b000 - 000269b011] >> > BRK >> > > ==> >> > > > [000269b000 >> > > > > - >> > > > > > 000269b011] >> > > > > > > #7 [0000100000 - 000041a000] >> > PGTABLE >> > > ==> >> > > > [0000100000 >> > > > > - >> > > > > > 000041a000] >> > > > > > > #8 [0000001000 - 0000001030] >> ACPI >> > SLIT >> > > ==> >> > > > [0000001000 >> > > > > - >> > > > > > 0000001030] >> > > > > > > found SMP MP-table at >> [ffff8800000fd750] >> > fd750 >> > > > > > > Zone PFN ranges: >> > > > > > > DMA 0x00000000 -> 0x00001000 >> > > > > > > DMA32 0x00001000 -> 0x00100000 >> > > > > > > Normal 0x00100000 -> 0x00100000 >> > > > > > > Movable zone start PFN for each >> node >> > > > > > > early_node_map[2] active PFN ranges >> > > > > > > 0: 0x00000000 -> 0x0000009d >> > > > > > > 0: 0x00000100 -> 0x00066c0a >> > > > > > > ACPI: PM-Timer IO Port: 0x408 >> > > > > > > ACPI: LAPIC (acpi_id[0x00] >> lapic_id[0x00] >> > > enabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x01] >> lapic_id[0x02] >> > > enabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x02] >> lapic_id[0x04] >> > > enabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x03] >> lapic_id[0x10] >> > > enabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x04] >> lapic_id[0x12] >> > > enabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x05] >> lapic_id[0x14] >> > > enabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x06] >> lapic_id[0x01] >> > > enabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x07] >> lapic_id[0x03] >> > > enabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x08] >> lapic_id[0x05] >> > > enabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x09] >> lapic_id[0x11] >> > > enabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x0a] >> lapic_id[0x13] >> > > enabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x0b] >> lapic_id[0x15] >> > > enabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x0c] >> lapic_id[0xff] >> > > disabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x0d] >> lapic_id[0xff] >> > > disabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x0e] >> lapic_id[0xff] >> > > disabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x0f] >> lapic_id[0xff] >> > > disabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x10] >> lapic_id[0xff] >> > > disabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x11] >> lapic_id[0xff] >> > > disabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x12] >> lapic_id[0xff] >> > > disabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x13] >> lapic_id[0xff] >> > > disabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x14] >> lapic_id[0xff] >> > > disabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x15] >> lapic_id[0xff] >> > > disabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x16] >> lapic_id[0xff] >> > > disabled) >> > > > > > > ACPI: LAPIC (acpi_id[0x17] >> lapic_id[0xff] >> > > disabled) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x00] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x01] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x02] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x03] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x04] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x05] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x06] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x07] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x08] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x09] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x10] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x11] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x12] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x13] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x14] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x15] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x16] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x17] high >> level >> > > lint[0x1]) >> > > > > > > ACPI: IOAPIC (id[0x08] >> address[0xfec00000] >> > > gsi_base[0]) >> > > > > > > IOAPIC[0]: apic_id 8, version 0, >> address >> > > 0xfec00000, GSI >> > > > 0-0 >> > > > > > > ACPI: IOAPIC (id[0x09] >> address[0xfec90000] >> > > gsi_base[24]) >> > > > > > > IOAPIC[1]: apic_id 9, version 0, >> address >> > > 0xfec90000, GSI >> > > > 24-24 >> > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 >> > global_irq 2 >> > > dfl dfl) >> > > > > > > ERROR: Unable to locate IOAPIC for >> GSI 2 >> > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 >> > global_irq 9 >> > > high >> > > > level) >> > > > > > > ERROR: Unable to locate IOAPIC for >> GSI 9 >> > > > > > > Using ACPI (MADT) for SMP >> configuration >> > > information >> > > > > > > ACPI: HPET id: 0x8086a401 base: >> 0xfed00000 >> > > > > > > SMP: Allowing 12 CPUs, 0 hotplug >> CPUs >> > > > > > > PM: Registered nosave memory: >> > 000000000009d000 - >> > > > > 0000000000100000 >> > > > > > > Allocating PCI resources starting >> at >> > b0000000 >> > > (gap: >> > > > > b0000000:4c000000) >> > > > > > > Booting paravirtualized kernel on >> Xen >> > > > > > > Xen version: 3.4.3-rc4-pre >> (preserve-AD) >> > (dom0) >> > > > > > > NR_CPUS:512 nr_cpumask_bits:512 >> > nr_cpu_ids:12 >> > > > nr_node_ids:1 >> > > > > > > PERCPU: Embedded 478 pages/cpu >> > @ffff880005ebc000 >> > > > s1928024 r8192 >> > > > > d21672 >> > > > > > u1957888 >> > > > > > > pcpu-alloc: s1928024 r8192 d21672 >> u1957888 >> > > > alloc=478*4096 >> > > > > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 >> [0] 03 >> > [0] 04 >> > > [0] 05 >> > > > [0] 06 >> > > > > [0] 07 >> > > > > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 >> [0] 11 >> > > > > > > Xen: using vcpu_info placement >> > > > > > > Built 1 zonelists in Node order, >> mobility >> > > grouping on. >> > > > Total >> > > > > pages: >> > > > > > 409291 >> > > > > > > Policy zone: DMA32 >> > > > > > > Kernel command line: ro >> > > root=/dev/VolGroup01/LogVol00 >> > > > > console=hvc0 >> > > > > > earlyprintk=xen nomodeset >> > > > > > > PID hash table entries: 4096 >> (order: 3, >> > 32768 >> > > bytes) >> > > > > > > Initializing CPU#0 >> > > > > > > DMA: Placing 64MB software IO TLB >> between >> > > > ffff880007525000 - >> > > > > > ffff88000b525000 >> > > > > > > DMA: software IO TLB at phys >> 0x7525000 - >> > > 0xb525000 >> > > > > > > xen_swiotlb_fixup: >> buf=ffff880007525000 >> > > size=67108864 >> > > > > > > xen_swiotlb_fixup: >> buf=ffff88000b585000 >> > > size=32768 >> > > > > > > Memory: 1514268k/1683496k available >> (4654k >> > kernel >> > > code, >> > > > 396k >> > > > > absent, >> > > > > > 168832k reserved, 3443k data, 3396k >> init) >> > > > > > > SLUB: Genslabs=14, HWalign=64, >> Order=0-3, >> > > MinObjects=0, >> > > > > CPUs=12, >> > > > > > Nodes=1 >> > > > > > > Hierarchical RCU implementation. >> > > > > > > NR_IRQS:4352 nr_irqs:3072 >> > > > > > > Already setup the GSI :0 >> > > > > > > Already setup the GSI :1 >> > > > > > > Already setup the GSI :2 >> > > > > > > Already setup the GSI :3 >> > > > > > > Already setup the GSI :4 >> > > > > > > Already setup the GSI :5 >> > > > > > > Already setup the GSI :6 >> > > > > > > Already setup the GSI :7 >> > > > > > > Already setup the GSI :8 >> > > > > > > Already setup the GSI :9 >> > > > > > > Already setup the GSI :10 >> > > > > > > Already setup the GSI :11 >> > > > > > > Already setup the GSI :12 >> > > > > > > Already setup the GSI :13 >> > > > > > > Already setup the GSI :14 >> > > > > > > Already setup the GSI :15 >> > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 >> > global_irq 2 >> > > dfl dfl) >> > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 >> > global_irq 9 >> > > high >> > > > level) >> > > > > > > xen: sci override: source_irq=9 >> > global_irq=9 >> > > trigger=c >> > > > > polarity=1 >> > > > > > > xen_allocate_pirq: returning irq 9 >> for gsi >> > 9 >> > > > > > > Already setup the GSI :9 >> > > > > > > xen: acpi sci 9 >> > > > > > > Console: colour VGA+ 80x25 >> > > > > > > console [hvc0] enabled, bootconsole >> > disabled >> > > console >> > > > [hvc0] >> > > > > enabled, >> > > > > > bootconsole disabled >> > > > > > > Lock dependency validator: >> Copyright (c) >> > 2006 Red >> > > Hat, >> > > > Inc., >> > > > > Ingo >> > > > > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 >> ... >> > > MAX_LOCK_DEPTH: >> > > > > 48 >> > > > > > ... MAX_LOCKDEP_KEYS: 8191 ... >> > > CLASSHASH_SIZE: >> > > > > 4096 ... >> > > > > > MAX_LOCKDEP_ENTRIES: 16384 ... >> > > MAX_LOCKDEP_CHAINS: >> > > > 32768 >> > > > > ... >> > > > > > CHAINHASH_SIZE: 16384 >> memory used >> > by lock >> > > > dependency >> > > > > info: >> > > > > > 6367 kB per task-struct memory >> footprint: >> > 2688 >> > > bytes >> > > > allocated >> > > > > 17039360 >> > > > > > bytes of page_cgroup please try >> > > 'cgroup_disable=memory' >> > > > option if >> > > > > you >> > > > > > don't want memory cgroups installing >> Xen >> > timer for >> > > CPU 0 >> > > > Detected >> > > > > > 3200.206 MHz processor. Calibrating >> delay >> > loop >> > > (skipped), >> > > > value >> > > > > > calculated using timer frequency.. >> 6400.41 >> > BogoMIPS >> > > > (lpj=3200206) >> > > > > > Security Framework initialized >> SELinux: >> > > Initializing. >> > > > Dentry >> > > > > cache hash >> > > > > > table entries: 262144 (order: 9, >> 2097152 >> > bytes) >> > > > Inode-cache hash >> > > > > table >> > > > > > entries: 131072 (order: 8, 1048576 >> bytes) >> > > Mount-cache hash >> > > > table >> > > > > > entries: 256 Initializing cgroup >> subsys ns >> > > Initializing >> > > > cgroup >> > > > > subsys >> > > > > > cpuacct Initializing cgroup subsys >> memory >> > > Initializing >> > > > cgroup >> > > > > subsys >> > > > > > devices Initializing cgroup subsys >> freezer >> > > Initializing >> > > > cgroup >> > > > > subsys >> > > > > > net_cls CPU: L1 I cache: 32K, L1 D >> cache: >> > 32K CPU: >> > > L2 >> > > > cache: 256K >> > > > > CPU: >> > > > > > L3 cache: 12288K CPU 0/0x0 -> Node 0 >> CPU: >> > > Unsupported >> > > > number of >> > > > > siblings >> > > > > > 32 Performance Events: unsupported p6 >> CPU >> > model 44 >> > > no PMU >> > > > driver, >> > > > > > software events only. lockdep: fixing >> up >> > > alternatives. SMP >> > > > > alternatives: >> > > > > > switching to UP code ACPI: Core >> revision >> > 20090903 >> > > ftrace: >> > > > > converting >> > > > > > mcount calls to 0f 1f 44 00 00 >> ftrace: >> > allocating >> > > 27971 >> > > > entries >> > > > > in 110 >> > > > > > pages installing Xen timer for CPU 1 >> > lockdep: >> > > fixing up >> > > > > alternatives. >> > > > > > SMP alternatives: switching to SMP >> code >> > > Initializing CPU#1 >> > > > CPU: >> > > > > L1 I >> > > > > > cache: 32K, L1 D cache: 32K CPU: L2 >> cache: >> > 256K >> > > CPU: L3 >> > > > cache: >> > > > > 12288K >> > > > > > CPU 1/0x0 -> Node 0 CPU: Unsupported >> number >> > of >> > > siblings 32 >> > > > > installing >> > > > > > Xen timer for CPU 2 Initializing >> CPU#2 CPU: >> > L1 I >> > > cache: >> > > > 32K, L1 D >> > > > > cache: >> > > > > > 32K CPU: L2 cache: 256K CPU: L3 >> cache: >> > 12288K CPU >> > > 2/0x0 -> >> > > > Node 0 >> > > > > CPU: >> > > > > > Unsupported number of siblings 32 >> installing >> > Xen >> > > timer for >> > > > CPU 3 >> > > > > > Initializing CPU#3 CPU: L1 I cache: >> 32K, L1 >> > D >> > > cache: 32K >> > > > CPU: L2 >> > > > > cache: >> > > > > > 256K CPU: L3 cache: 12288K CPU 3/0x0 >> -> Node >> > 0 CPU: >> > > > Unsupported >> > > > > number >> > > > > > of siblings 32 installing Xen timer >> for CPU >> > 4 >> > > Initializing >> > > > CPU#4 >> > > > > CPU: L1 >> > > > > > I cache: 32K, L1 D cache: 32K CPU: L2 >> cache: >> > 256K >> > > CPU: L3 >> > > > cache: >> > > > > 12288K >> > > > > > CPU 4/0x0 -> Node 0 CPU: Unsupported >> number >> > of >> > > siblings 32 >> > > > > installing >> > > > > > Xen timer for CPU 5 Initializing >> CPU#5 CPU: >> > L1 I >> > > cache: >> > > > 32K, L1 D >> > > > > cache: >> > > > > > 32K CPU: L2 cache: 256K CPU: L3 >> cache: >> > 12288K CPU >> > > 5/0x0 -> >> > > > Node 0 >> > > > > CPU: >> > > > > > Unsupported number of siblings 32 >> installing >> > Xen >> > > timer for >> > > > CPU 6 >> > > > > > Initializing CPU#6 CPU: L1 I cache: >> 32K, L1 >> > D >> > > cache: 32K >> > > > CPU: L2 >> > > > > cache: >> > > > > > 256K CPU: L3 cache: 12288K CPU 6/0x0 >> -> Node >> > 0 CPU: >> > > > Unsupported >> > > > > number >> > > > > > of siblings 32 installing Xen timer >> for CPU >> > 7 >> > > Initializing >> > > > CPU#7 >> > > > > CPU: L1 >> > > > > > I cache: 32K, L1 D cache: 32K CPU: L2 >> cache: >> > 256K >> > > CPU: L3 >> > > > cache: >> > > > > 12288K >> > > > > > CPU 7/0x0 -> Node 0 CPU: Unsupported >> number >> > of >> > > siblings 32 >> > > > > installing >> > > > > > Xen timer for CPU 8 Initializing >> CPU#8 CPU: >> > L1 I >> > > cache: >> > > > 32K, L1 D >> > > > > cache: >> > > > > > 32K CPU: L2 cache: 256K CPU: L3 >> cache: >> > 12288K CPU >> > > 8/0x0 -> >> > > > Node 0 >> > > > > CPU: >> > > > > > Unsupported number of siblings 32 >> installing >> > Xen >> > > timer for >> > > > CPU 9 >> > > > > > Initializing CPU#9 CPU: L1 I cache: >> 32K, L1 >> > D >> > > cache: 32K >> > > > CPU: L2 >> > > > > cache: >> > > > > > 256K CPU: L3 cache: 12288K CPU 9/0x0 >> -> Node >> > 0 CPU: >> > > > Unsupported >> > > > > number >> > > > > > of siblings 32 installing Xen timer >> for CPU >> > 10 >> > > > Initializing >> > > > > CPU#10 CPU: >> > > > > > L1 I cache: 32K, L1 D cache: 32K CPU: >> L2 >> > cache: >> > > 256K CPU: >> > > > L3 >> > > > > cache: >> > > > > > 12288K CPU 10/0x0 -> Node 0 CPU: >> Unsupported >> > number >> > > of >> > > > siblings >> > > > > 32 >> > > > > > installing Xen timer for CPU 11 >> Initializing >> > CPU#11 >> > > CPU: >> > > > L1 I >> > > > > cache: >> > > > > > 32K, L1 D cache: 32K CPU: L2 cache: >> 256K >> > CPU: L3 >> > > cache: >> > > > 12288K >> > > > > CPU >> > > > > > 11/0x0 -> Node 0 CPU: Unsupported >> number of >> > > siblings 32 >> > > > Brought >> > > > > up 12 >> > > > > > CPUs Grant table initialized >> regulator: core >> > > version 0.5 >> > > > Time: >> > > > > 14:45:00 >> > > > > > Date: 03/16/10 NET: Registered >> protocol >> > family 16 >> > > > > xenbus_probe_init ok >> > > > > > ACPI FADT declares the system doesn't >> > support PCIe >> > > ASPM, >> > > > so >> > > > > disable it >> > > > > > ACPI: bus type pci registered PCI: >> MCFG >> > > configuration 0: >> > > > base >> > > > > a0000000 >> > > > > > segment 0 buses 0 - 255 PCI: MCFG >> area at >> > a0000000 >> > > > reserved in >> > > > > E820 PCI: >> > > > > > Using MMCONFIG at a0000000 - afffffff >> PCI: >> > Using >> > > > configuration >> > > > > type 1 >> > > > > > for base access bio: create slab >> <bio-0> at >> > 0 ACPI >> > > Error: >> > > > Field >> > > > > [CPB3] >> > > > > > at 96 exceeds Buffer [NULL] size 64 >> (bits) >> > > > > (20090903/dsopcode-596) ACPI >> > > > > > Error (psparse-0537): Method >> parse/execution >> > failed >> > > > [\_SB_._OSC] >> > > > > (Node >> > > > > > ffff880064e00c98), >> AE_AML_BUFFER_LIMIT ACPI: >> > > Interpreter >> > > > enabled >> > > > > ACPI: >> > > > > > (supports S0 S1 S3 S4 S5) ACPI: Using >> IOAPIC >> > for >> > > interrupt >> > > > > routing ACPI >> > > > > > Warning: Incorrect checksum in table >> [ ] >> > - 97, >> > > should >> > > > be DB >> > > > > > (20090903/tbutils-314) ACPI: No dock >> devices >> > found. >> > > ACPI: >> > > > PCI >> > > > > Root >> > > > > > Bridge [PCI0] (0000:00) pci >> 0000:00:01.0: >> > PME# >> > > supported >> > > > from D0 >> > > > > D3hot >> > > > > > D3cold pci 0000:00:01.0: PME# >> disabled pci >> > > 0000:00:02.0: >> > > > PME# >> > > > > supported >> > > > > > from D0 D3hot D3cold pci >> 0000:00:02.0: PME# >> > > disabled pci >> > > > > 0000:00:03.0: >> > > > > > PME# supported from D0 D3hot D3cold >> pci >> > > 0000:00:03.0: PME# >> > > > > disabled pci >> > > > > > 0000:00:04.0: PME# supported from D0 >> D3hot >> > D3cold >> > > pci >> > > > > 0000:00:04.0: PME# >> > > > > > disabled pci 0000:00:05.0: PME# >> supported >> > from D0 >> > > D3hot >> > > > D3cold >> > > > > pci >> > > > > > 0000:00:05.0: PME# disabled pci >> > 0000:00:06.0: PME# >> > > > supported from >> > > > > D0 >> > > > > > D3hot D3cold pci 0000:00:06.0: PME# >> disabled >> > pci >> > > > 0000:00:07.0: >> > > > > PME# >> > > > > > supported from D0 D3hot D3cold pci >> > 0000:00:07.0: >> > > PME# >> > > > disabled >> > > > > pci >> > > > > > 0000:00:08.0: PME# supported from D0 >> D3hot >> > D3cold >> > > pci >> > > > > 0000:00:08.0: PME# >> > > > > > disabled pci 0000:00:09.0: PME# >> supported >> > from D0 >> > > D3hot >> > > > D3cold >> > > > > pci >> > > > > > 0000:00:09.0: PME# disabled pci >> > 0000:00:0a.0: PME# >> > > > supported from >> > > > > D0 >> > > > > > D3hot D3cold pci 0000:00:0a.0: PME# >> disabled >> > pci >> > > > 0000:00:13.0: >> > > > > PME# >> > > > > > supported from D0 D3hot D3cold pci >> > 0000:00:13.0: >> > > PME# >> > > > disabled >> > > > > pci >> > > > > > 0000:00:1a.7: PME# supported from D0 >> D3hot >> > D3cold >> > > pci >> > > > > 0000:00:1a.7: PME# >> > > > > > disabled pci 0000:00:1c.0: PME# >> supported >> > from D0 >> > > D3hot >> > > > D3cold >> > > > > pci >> > > > > > 0000:00:1c.0: PME# disabled pci >> > 0000:00:1c.4: PME# >> > > > supported from >> > > > > D0 >> > > > > > D3hot D3cold pci 0000:00:1c.4: PME# >> disabled >> > pci >> > > > 0000:00:1c.5: >> > > > > PME# >> > > > > > supported from D0 D3hot D3cold pci >> > 0000:00:1c.5: >> > > PME# >> > > > disabled >> > > > > pci >> > > > > > 0000:00:1d.7: PME# supported from D0 >> D3hot >> > D3cold >> > > pci >> > > > > 0000:00:1d.7: PME# >> > > > > > disabled pci 0000:00:1f.0: quirk: >> region >> > 0400-047f >> > > claimed >> > > > by >> > > > > ICH6 >> > > > > > ACPI/GPIO/TCO pci 0000:00:1f.0: >> quirk: >> > region >> > > 0500-053f >> > > > claimed >> > > > > by ICH6 >> > > > > > GPIO pci 0000:00:1f.0: ICH7 LPC >> Generic IO >> > decode 1 >> > > PIO at >> > > > 0680 >> > > > > (mask >> > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC >> Generic IO >> > decode >> > > 2 PIO >> > > > at 0ca0 >> > > > > (mask >> > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC >> Generic IO >> > decode >> > > 3 PIO >> > > > at 0600 >> > > > > (mask >> > > > > > 001f) pci 0000:00:1f.2: PME# >> supported from >> > D3hot >> > > pci >> > > > > 0000:00:1f.2: PME# >> > > > > > disabled pci 0000:01:00.0: PME# >> supported >> > from D0 >> > > D3hot >> > > > D3cold >> > > > > pci >> > > > > > 0000:01:00.0: PME# disabled pci >> > 0000:01:00.1: PME# >> > > > supported from >> > > > > D0 >> > > > > > D3hot D3cold pci 0000:01:00.1: PME# >> disabled >> > pci >> > > > 0000:0c:00.0: >> > > > > disabling >> > > > > > ASPM on pre-1.1 PCIe device. You can >> enable >> > it >> > > with >> > > > > 'pcie_aspm=force' >> > > > > > pci 0000:00:1e.0: transparent bridge >> ACPI: >> > PCI Root >> > > Bridge >> > > > [PCI1] >> > > > > > (0000:fe) ACPI: PCI Root Bridge >> [PCI2] >> > (0000:ff) >> > > ACPI: PCI >> > > > > Interrupt >> > > > > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 >> 12 14 >> > 15) >> > > ACPI: PCI >> > > > > Interrupt Link >> > > > > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 >> 15) >> > ACPI: PCI >> > > > Interrupt >> > > > > Link >> > > > > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 >> 15) >> > ACPI: PCI >> > > > Interrupt >> > > > > Link >> > > > > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 >> 15) >> > ACPI: PCI >> > > > Interrupt >> > > > > Link >> > > > > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 >> 15) *0, >> > > disabled. >> > > > ACPI: PCI >> > > > > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 >> 9 10 >> > *11 12 >> > > 14 15) >> > > > ACPI: >> > > > > PCI >> > > > > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 >> 9 10 >> > 11 12 14 >> > > 15) >> > > > *0, >> > > > > disabled. >> > > > > > ACPI: PCI Interrupt Link [LNKH] (IRQs >> 3 4 5 >> > 6 7 9 >> > > *10 11 >> > > > 12 14 >> > > > > 15) >> > > > > > xenbus_probe_backend_init bus >> registered ok >> > > > > xenbus_probe_frontend_init >> > > > > > bus registered ok xen_balloon: >> Initialising >> > balloon >> > > driver >> > > > with >> > > > > page >> > > > > > order 0. vgaarb: device added: >> > > > > > >> > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none >> > > > vgaarb: >> > > > > loaded >> > > > > > SCSI subsystem initialized usbcore: >> > registered new >> > > > interface >> > > > > driver >> > > > > > usbfs usbcore: registered new >> interface >> > driver hub >> > > > usbcore: >> > > > > registered >> > > > > > new device driver usb PCI: Using ACPI >> for >> > IRQ >> > > routing >> > > > NetLabel: >> > > > > > Initializing NetLabel: domain hash >> size = >> > 128 >> > > NetLabel: >> > > > > protocols = >> > > > > > UNLABELED CIPSOv4 NetLabel: >> unlabeled >> > traffic >> > > allowed by >> > > > default >> > > > > > Switching to clocksource xen kstop/0 >> used >> > greatest >> > > stack >> > > > depth: >> > > > > 6568 >> > > > > > bytes left kstop/1 used greatest >> stack >> > depth: 6536 >> > > bytes >> > > > left >> > > > > pnp: PnP >> > > > > > ACPI init ACPI: bus type pnp >> registered >> > > xen_allocate_pirq: >> > > > > returning irq >> > > > > > 8 for gsi 8 Already setup the GSI :8 >> > > xen_allocate_pirq: >> > > > returning >> > > > > irq 13 >> > > > > > for gsi 13 Already setup the GSI :13 >> pnp: >> > PnP ACPI: >> > > found >> > > > 13 >> > > > > devices >> > > > > > ACPI: ACPI bus type pnp unregistered >> system >> > 00:07: >> > > ioport >> > > > range >> > > > > > 0x500-0x53f has been reserved system >> 00:07: >> > ioport >> > > range >> > > > > 0x400-0x47f has >> > > > > > been reserved system 00:07: ioport >> range >> > > 0x800-0x81f has >> > > > been >> > > > > reserved >> > > > > > system 00:07: ioport range >> 0x2f8-0x2ff has >> > been >> > > reserved >> > > > system >> > > > > 00:07: >> > > > > > iomem range 0xfed1c000-0xfed8bffe >> could not >> > be >> > > reserved >> > > > system >> > > > > 00:07: >> > > > > > iomem range 0xff000000-0xffffffff >> could not >> > be >> > > reserved >> > > > system >> > > > > 00:07: >> > > > > > iomem range 0xfee00000-0xfeefffff has >> been >> > reserved >> > > system >> > > > 00:07: >> > > > > iomem >> > > > > > range 0xfe900000-0xfe90001f has been >> > reserved >> > > system >> > > > 00:07: iomem >> > > > > range >> > > > > > 0xfea00000-0xfea0001f has been >> reserved >> > system >> > > 00:07: >> > > > iomem range >> > > > > > 0xfed1b000-0xfed1bfff has been >> reserved pci >> > > 0000:0c:00.0: >> > > > BAR 6: >> > > > > no >> > > > > > parent found for of device >> > [0xffff0000-0xffffffff] >> > > pci >> > > > > 0000:00:01.0: PCI >> > > > > > bridge, secondary bus 0000:01 pci >> > 0000:00:01.0: >> > > IO >> > > > window: >> > > > > > 0x1000-0x1fff pci 0000:00:01.0: MEM >> > window: >> > > > > 0xb1900000-0xb19fffff pci >> > > > > > 0000:00:01.0: PREFETCH window: >> disabled >> > pci >> > > > 0000:00:02.0: PCI >> > > > > bridge, >> > > > > > secondary bus 0000:02 pci >> 0000:00:02.0: IO >> > > window: >> > > > disabled pci >> > > > > > 0000:00:02.0: MEM window: disabled >> pci >> > > 0000:00:02.0: >> > > > PREFETCH >> > > > > > window: disabled pci 0000:00:03.0: >> PCI >> > bridge, >> > > secondary >> > > > bus >> > > > > 0000:03 pci >> > > > > > 0000:00:03.0: IO window: disabled >> pci >> > > 0000:00:03.0: >> > > > MEM >> > > > > window: >> > > > > > disabled pci 0000:00:03.0: PREFETCH >> > window: >> > > disabled pci >> > > > > 0000:00:04.0: >> > > > > > PCI bridge, secondary bus 0000:04 pci >> > 0000:00:04.0: >> > > IO >> > > > window: >> > > > > > disabled pci 0000:00:04.0: MEM >> window: >> > disabled >> > > pci >> > > > > 0000:00:04.0: >> > > > > > PREFETCH window: disabled pci >> 0000:00:05.0: >> > PCI >> > > bridge, >> > > > secondary >> > > > > bus >> > > > > > 0000:05 pci 0000:00:05.0: IO >> window: >> > disabled pci >> > > > 0000:00:05.0: >> > > > > MEM >> > > > > > window: disabled pci 0000:00:05.0: >> > PREFETCH >> > > window: >> > > > disabled >> > > > > pci >> > > > > > 0000:00:06.0: PCI bridge, secondary >> bus >> > 0000:06 pci >> > > > 0000:00:06.0: >> > > > > IO >> > > > > > window: disabled pci 0000:00:06.0: >> MEM >> > window: >> > > disabled >> > > > pci >> > > > > > 0000:00:06.0: PREFETCH window: >> disabled >> > pci >> > > > 0000:00:07.0: PCI >> > > > > bridge, >> > > > > > secondary bus 0000:07 pci >> 0000:00:07.0: IO >> > > window: >> > > > disabled pci >> > > > > > 0000:00:07.0: MEM window: disabled >> pci >> > > 0000:00:07.0: >> > > > PREFETCH >> > > > > > window: disabled pci 0000:00:08.0: >> PCI >> > bridge, >> > > secondary >> > > > bus >> > > > > 0000:08 pci >> > > > > > 0000:00:08.0: IO window: disabled >> pci >> > > 0000:00:08.0: >> > > > MEM >> > > > > window: >> > > > > > disabled pci 0000:00:08.0: PREFETCH >> > window: >> > > disabled pci >> > > > > 0000:00:09.0: >> > > > > > PCI bridge, secondary bus 0000:09 pci >> > 0000:00:09.0: >> > > IO >> > > > window: >> > > > > > 0x3000-0x3fff pci 0000:00:09.0: MEM >> > window: >> > > > > 0xb1b00000-0xb1cfffff pci >> > > > > > 0000:00:09.0: PREFETCH window: >> > > > > 0x000000b1d00000-0x000000b1efffff pci >> > > > > > 0000:00:0a.0: PCI bridge, secondary >> bus >> > 0000:0a pci >> > > > 0000:00:0a.0: >> > > > > IO >> > > > > > window: disabled pci 0000:00:0a.0: >> MEM >> > window: >> > > disabled >> > > > pci >> > > > > > 0000:00:0a.0: PREFETCH window: >> disabled >> > pci >> > > > 0000:00:1c.0: PCI >> > > > > bridge, >> > > > > > secondary bus 0000:0b pci >> 0000:00:1c.0: IO >> > > window: >> > > > disabled pci >> > > > > > 0000:00:1c.0: MEM window: disabled >> pci >> > > 0000:00:1c.0: >> > > > PREFETCH >> > > > > > window: disabled pci 0000:00:1c.4: >> PCI >> > bridge, >> > > secondary >> > > > bus >> > > > > 0000:0c pci >> > > > > > 0000:00:1c.4: IO window: disabled >> pci >> > > 0000:00:1c.4: >> > > > MEM >> > > > > window: >> > > > > > 0xb1000000-0xb18fffff pci >> 0000:00:1c.4: >> > PREFETCH >> > > window: >> > > > > > 0x000000b0000000-0x000000b0ffffff pci >> > 0000:00:1c.5: >> > > PCI >> > > > bridge, >> > > > > > secondary bus 0000:0d pci >> 0000:00:1c.5: IO >> > > window: >> > > > disabled pci >> > > > > > 0000:00:1c.5: MEM window: disabled >> pci >> > > 0000:00:1c.5: >> > > > PREFETCH >> > > > > > window: disabled pci 0000:00:1e.0: >> PCI >> > bridge, >> > > secondary >> > > > bus >> > > > > 0000:0e pci >> > > > > > 0000:00:1e.0: IO window: disabled >> pci >> > > 0000:00:1e.0: >> > > > MEM >> > > > > window: >> > > > > > disabled pci 0000:00:1e.0: PREFETCH >> > window: >> > > disabled pci >> > > > > 0000:00:01.0: >> > > > > > PCI INT A -> GSI 28 (level, low) -> >> IRQ 28 >> > pci >> > > > 0000:00:02.0: PCI >> > > > > INT A >> > > > > > -> GSI 29 (level, low) -> IRQ 29 pci >> > 0000:00:03.0: >> > > PCI INT >> > > > A -> >> > > > > GSI 24 >> > > > > > (level, low) -> IRQ 24 pci >> 0000:00:04.0: PCI >> > INT A >> > > -> GSI >> > > > 25 >> > > > > (level, >> > > > > > low) -> IRQ 25 pci 0000:00:05.0: PCI >> INT A >> > -> GSI >> > > 26 >> > > > (level, low) >> > > > > -> IRQ >> > > > > > 26 pci 0000:00:06.0: PCI INT A -> GSI >> 27 >> > (level, >> > > low) -> >> > > > IRQ 27 >> > > > > pci >> > > > > > 0000:00:07.0: PCI INT A -> GSI 30 >> (level, >> > low) -> >> > > IRQ 30 >> > > > pci >> > > > > > 0000:00:08.0: PCI INT A -> GSI 31 >> (level, >> > low) -> >> > > IRQ 31 >> > > > pci >> > > > > > 0000:00:09.0: PCI INT A -> GSI 32 >> (level, >> > low) -> >> > > IRQ 32 >> > > > pci >> > > > > > 0000:00:0a.0: PCI INT A -> GSI 33 >> (level, >> > low) -> >> > > IRQ 33 >> > > > pci >> > > > > > 0000:00:1c.0: PCI INT A -> GSI 16 >> (level, >> > low) -> >> > > IRQ 16 >> > > > > > xen_allocate_pirq: returning irq 16 >> for gsi >> > 16 >> > > Already >> > > > setup the >> > > > > GSI :16 >> > > > > > pci 0000:00:1c.4: PCI INT A -> GSI 16 >> > (level, low) >> > > -> IRQ >> > > > 16 pci >> > > > > > 0000:00:1c.5: PCI INT B -> GSI 17 >> (level, >> > low) -> >> > > IRQ 17 >> > > > NET: >> > > > > Registered >> > > > > > protocol family 2 IP route cache hash >> table >> > > entries: 65536 >> > > > > (order: 7, >> > > > > > 524288 bytes) TCP established hash >> table >> > entries: >> > > 262144 >> > > > (order: >> > > > > 10, >> > > > > > 4194304 bytes) TCP bind hash table >> entries: >> > 65536 >> > > (order: >> > > > 10, >> > > > > 4718592 >> > > > > > bytes) TCP: Hash tables configured >> > (established >> > > 262144 >> > > > bind >> > > > > 65536) TCP >> > > > > > reno registered NET: Registered >> protocol >> > family 1 >> > > pci >> > > > > 0000:01:00.0: >> > > > > > Disabling L0s pci 0000:01:00.1: >> Disabling >> > L0s >> > > Trying to >> > > > unpack >> > > > > rootfs >> > > > > > image as initramfs... Freeing initrd >> memory: >> > 6474k >> > > freed >> > > > DMA-API: >> > > > > > preallocated 32768 debug entries >> DMA-API: >> > debugging >> > > > enabled by >> > > > > kernel >> > > > > > config PCI-DMA: Using software bounce >> > buffering for >> > > IO >> > > > (SWIOTLB) >> > > > > DMA: >> > > > > > Placing 64MB software IO TLB between >> > > ffff880007525000 - >> > > > > ffff88000b525000 >> > > > > > DMA: software IO TLB at phys >> 0x7525000 - >> > 0xb525000 >> > > audit: >> > > > > initializing >> > > > > > netlink socket (disabled) type=2000 >> > > > audit(1268750702.035:1): >> > > > > initialized >> > > > > > HugeTLB registered 2 MB page size, >> > pre-allocated 0 >> > > pages >> > > > VFS: >> > > > > Disk >> > > > > > quotas dquot_6.5.2 Dquot-cache hash >> table >> > entries: >> > > 512 >> > > > (order 0, >> > > > > 4096 >> > > > > > bytes) msgmni has been set to 2970 >> > cryptomgr_test >> > > used >> > > > greatest >> > > > > stack >> > > > > > depth: 5864 bytes left cryptomgr_test >> used >> > greatest >> > > stack >> > > > depth: >> > > > > 5816 >> > > > > > bytes left alg: No test for stdrng >> (krng) >> > Block >> > > layer SCSI >> > > > > generic (bsg) >> > > > > > driver version 0.4 loaded (major 252) >> io >> > scheduler >> > > noop >> > > > > registered io >> > > > > > scheduler anticipatory registered io >> > scheduler >> > > deadline >> > > > > registered io >> > > > > > scheduler cfq registered (default) >> > pci_hotplug: PCI >> > > Hot >> > > > Plug PCI >> > > > > Core >> > > > > > version: 0.5 pciehp >> 0000:00:09.0:pcie04: HPC >> > > vendor_id >> > > > 8086 >> > > > > device_id >> > > > > > 3410 ss_vid 0 ss_did 0 pciehp: PCI >> Express >> > Hot Plug >> > > > Controller >> > > > > Driver >> > > > > > version: 0.4 acpiphp: ACPI Hot Plug >> PCI >> > Controller >> > > Driver >> > > > > version: 0.5 >> > > > > > acpiphp_glue: Slot 2 already >> registered by >> > another >> > > hotplug >> > > > driver >> > > > > > acpiphp_glue: Slot 2 already >> registered by >> > another >> > > hotplug >> > > > driver >> > > > > > acpiphp_glue: Slot 2 already >> registered by >> > another >> > > hotplug >> > > > driver >> > > > > > acpiphp_glue: Slot 2 already >> registered by >> > another >> > > hotplug >> > > > driver >> > > > > > acpiphp_glue: Slot 2 already >> registered by >> > another >> > > hotplug >> > > > driver >> > > > > > acpiphp_glue: Slot 2 already >> registered by >> > another >> > > hotplug >> > > > driver >> > > > > > acpiphp_glue: Slot 2 already >> registered by >> > another >> > > hotplug >> > > > driver >> > > > > > acpiphp_glue: Slot 2 already >> registered by >> > another >> > > hotplug >> > > > driver >> > > > > > pci-stub: invalid id string "" input: >> Sleep >> > Button >> > > as >> > > > > > >> > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 >> > > > ACPI: >> > > > > Sleep >> > > > > > Button [SLPB] input: Power Button as >> > > > > > >> > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: >> > > Power >> > > > Button >> > > > > [PWRF] >> > > > > > registering netback hpet_acpi_add: no >> > address or >> > > irqs in >> > > > _CRS >> > > > > > Non-volatile memory driver v1.3 Linux >> > agpgart >> > > interface >> > > > v0.103 >> > > > > Serial: >> > > > > > 8250/16550 driver, 4 ports, IRQ >> sharing >> > enabled >> > > > serial8250: ttyS1 >> > > > > at I/O >> > > > > > 0x2f8 (irq = 3) is a 16550A brd: >> module >> > loaded >> > > loop: >> > > > module >> > > > > loaded >> > > > > > input: Macintosh mouse button >> emulation as >> > > > > /devices/virtual/input/input2 >> > > > > > ahci 0000:00:1f.2: PCI INT A -> GSI >> 19 >> > (level, low) >> > > -> IRQ >> > > > 19 >> > > > > ahci >> > > > > > 0000:00:1f.2: AHCI 0001.0200 32 slots >> 6 >> > ports 3 >> > > Gbps 0x3f >> > > > impl >> > > > > SATA mode >> > > > > > ahci 0000:00:1f.2: flags: 64bit ncq >> sntf pm >> > led clo >> > > pio >> > > > slum part >> > > > > ccc >> > > > > > ems scsi0 : ahci scsi1 : ahci scsi2 >> : ahci >> > scsi3 : >> > > ahci >> > > > scsi4 : >> > > > > ahci >> > > > > > scsi5 : ahci ata1: SATA max UDMA/133 >> > irq_stat >> > > 0x00400040, >> > > > > connection >> > > > > > status changed irq 2996 ata2: SATA >> max >> > UDMA/133 >> > > abar >> > > > > m2048@0xb1a00000 >> > > > > > port 0xb1a00180 irq 2996 ata3: SATA >> max >> > UDMA/133 >> > > abar >> > > > > m2048@0xb1a00000 >> > > > > > port 0xb1a00200 irq 2996 ata4: SATA >> max >> > UDMA/133 >> > > abar >> > > > > m2048@0xb1a00000 >> > > > > > port 0xb1a00280 irq 2996 ata5: SATA >> max >> > UDMA/133 >> > > abar >> > > > > m2048@0xb1a00000 >> > > > > > port 0xb1a00300 irq 2996 ata6: SATA >> max >> > UDMA/133 >> > > abar >> > > > > m2048@0xb1a00000 >> > > > > > port 0xb1a00380 irq 2996 Fixed MDIO >> Bus: >> > probed >> > > ehci_hcd: >> > > > USB 2.0 >> > > > > > 'Enhanced' Host Controller (EHCI) >> Driver >> > ehci_hcd >> > > > 0000:00:1a.7: >> > > > > PCI INT >> > > > > > C -> GSI 18 (level, low) -> IRQ 18 >> ehci_hcd >> > > 0000:00:1a.7: >> > > > EHCI >> > > > > Host >> > > > > > Controller ehci_hcd 0000:00:1a.7: new >> USB >> > bus >> > > registered, >> > > > > assigned bus >> > > > > > number 1 ehci_hcd 0000:00:1a.7: debug >> port 1 >> > > ehci_hcd >> > > > > 0000:00:1a.7: irq >> > > > > > 18, io mem 0xb1a02000 ehci_hcd >> 0000:00:1a.7: >> > USB >> > > 2.0 >> > > > started, >> > > > > EHCI 1.00 >> > > > > > usb usb1: New USB device found, >> > idVendor=1d6b, >> > > > idProduct=0002 usb >> > > > > usb1: >> > > > > > New USB device strings: Mfr=3, >> Product=2, >> > > SerialNumber=1 >> > > > usb >> > > > > usb1: >> > > > > > Product: EHCI Host Controller usb >> usb1: >> > > Manufacturer: >> > > > Linux >> > > > > 2.6.32.9 >> > > > > > ehci_hcd usb usb1: SerialNumber: >> > 0000:00:1a.7 usb >> > > usb1: >> > > > > configuration #1 >> > > > > > chosen from 1 choice hub 1-0:1.0: USB >> hub >> > found hub >> > > > 1-0:1.0: 6 >> > > > > ports >> > > > > > detected ehci_hcd 0000:00:1d.7: PCI >> INT A -> >> > GSI 23 >> > > > (level, low) >> > > > > -> IRQ >> > > > > > 23 ehci_hcd 0000:00:1d.7: EHCI Host >> > Controller >> > > ehci_hcd >> > > > > 0000:00:1d.7: >> > > > > > new USB bus registered, assigned bus >> number >> > 2 >> > > ehci_hcd >> > > > > 0000:00:1d.7: >> > > > > > debug port 1 ehci_hcd 0000:00:1d.7: >> irq 23, >> > io mem >> > > > 0xb1a01000 >> > > > > ehci_hcd >> > > > > > 0000:00:1d.7: USB 2.0 started, EHCI >> 1.00 usb >> > usb2: >> > > New USB >> > > > device >> > > > > found, >> > > > > > idVendor=1d6b, idProduct=0002 usb >> usb2: New >> > USB >> > > device >> > > > strings: >> > > > > Mfr=3, >> > > > > > Product=2, SerialNumber=1 usb usb2: >> Product: >> > EHCI >> > > Host >> > > > Controller >> > > > > usb >> > > > > > usb2: Manufacturer: Linux 2.6.32.9 >> ehci_hcd >> > usb >> > > usb2: >> > > > > SerialNumber: >> > > > > > 0000:00:1d.7 usb usb2: configuration >> #1 >> > chosen from >> > > 1 >> > > > choice hub >> > > > > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 >> ports >> > > detected >> > > > ohci_hcd: >> > > > > USB 1.1 >> > > > > > 'Open' Host Controller (OHCI) Driver >> > uhci_hcd: USB >> > > > Universal Host >> > > > > > Controller Interface driver >> > xen_allocate_pirq: >> > > returning >> > > > irq 16 >> > > > > for gsi >> > > > > > 16 Already setup the GSI :16 uhci_hcd >> > 0000:00:1a.0: >> > > PCI >> > > > INT A -> >> > > > > GSI 16 >> > > > > > (level, low) -> IRQ 16 uhci_hcd >> > 0000:00:1a.0: UHCI >> > > Host >> > > > > Controller >> > > > > > uhci_hcd 0000:00:1a.0: new USB bus >> > registered, >> > > assigned >> > > > bus >> > > > > number 3 >> > > > > > uhci_hcd 0000:00:1a.0: irq 16, io >> base >> > 0x000020e0 >> > > usb >> > > > usb3: New >> > > > > USB >> > > > > > device found, idVendor=1d6b, >> idProduct=0001 >> > usb >> > > usb3: New >> > > > USB >> > > > > device >> > > > > > strings: Mfr=3, Product=2, >> SerialNumber=1 >> > usb usb3: >> > > > Product: UHCI >> > > > > Host >> > > > > > Controller usb usb3: Manufacturer: >> Linux >> > 2.6.32.9 >> > > uhci_hcd >> > > > usb >> > > > > usb3: >> > > > > > SerialNumber: 0000:00:1a.0 usb usb3: >> > configuration >> > > #1 >> > > > chosen from >> > > > > 1 >> > > > > > choice hub 3-0:1.0: USB hub found hub >> > 3-0:1.0: 2 >> > > ports >> > > > detected >> > > > > uhci_hcd >> > > > > > 0000:00:1a.1: PCI INT B -> GSI 21 >> (level, >> > low) -> >> > > IRQ 21 >> > > > uhci_hcd >> > > > > > 0000:00:1a.1: UHCI Host Controller >> uhci_hcd >> > > 0000:00:1a.1: >> > > > new USB >> > > > > bus >> > > > > > registered, assigned bus number 4 >> uhci_hcd >> > > 0000:00:1a.1: >> > > > irq 21, >> > > > > io base >> > > > > > 0x000020c0 usb usb4: New USB device >> found, >> > > idVendor=1d6b, >> > > > > idProduct=0001 >> > > > > > usb usb4: New USB device strings: >> Mfr=3, >> > Product=2, >> > > > > SerialNumber=1 usb >> > > > > > usb4: Product: UHCI Host Controller >> usb >> > usb4: >> > > > Manufacturer: Linux >> > > > > > 2.6.32.9 uhci_hcd usb usb4: >> SerialNumber: >> > > 0000:00:1a.1 usb >> > > > usb4: >> > > > > > configuration #1 chosen from 1 choice >> hub >> > 4-0:1.0: >> > > USB hub >> > > > found >> > > > > hub >> > > > > > 4-0:1.0: 2 ports detected >> xen_allocate_pirq: >> > > returning irq >> > > > 19 for >> > > > > gsi 19 >> > > > > > Already setup the GSI :19 uhci_hcd >> > 0000:00:1a.2: >> > > PCI INT D >> > > > -> GSI >> > > > > 19 >> > > > > > (level, low) -> IRQ 19 uhci_hcd >> > 0000:00:1a.2: UHCI >> > > Host >> > > > > Controller >> > > > > > uhci_hcd 0000:00:1a.2: new USB bus >> > registered, >> > > assigned >> > > > bus >> > > > > number 5 >> > > > > > uhci_hcd 0000:00:1a.2: irq 19, io >> base >> > 0x000020a0 >> > > usb >> > > > usb5: New >> > > > > USB >> > > > > > device found, idVendor=1d6b, >> idProduct=0001 >> > usb >> > > usb5: New >> > > > USB >> > > > > device >> > > > > > strings: Mfr=3, Product=2, >> SerialNumber=1 >> > usb usb5: >> > > > Product: UHCI >> > > > > Host >> > > > > > Controller usb usb5: Manufacturer: >> Linux >> > 2.6.32.9 >> > > uhci_hcd >> > > > usb >> > > > > usb5: >> > > > > > SerialNumber: 0000:00:1a.2 usb usb5: >> > configuration >> > > #1 >> > > > chosen from >> > > > > 1 >> > > > > > choice hub 5-0:1.0: USB hub found hub >> > 5-0:1.0: 2 >> > > ports >> > > > detected >> > > > > > xen_allocate_pirq: returning irq 23 >> for gsi >> > 23 >> > > Already >> > > > setup the >> > > > > GSI :23 >> > > > > > uhci_hcd 0000:00:1d.0: PCI INT A -> >> GSI 23 >> > (level, >> > > low) -> >> > > > IRQ 23 >> > > > > > uhci_hcd 0000:00:1d.0: UHCI Host >> Controller >> > > uhci_hcd >> > > > > 0000:00:1d.0: new >> > > > > > USB bus registered, assigned bus >> number 6 >> > uhci_hcd >> > > > 0000:00:1d.0: >> > > > > irq 23, >> > > > > > io base 0x00002080 usb usb6: New USB >> device >> > found, >> > > > idVendor=1d6b, >> > > > > > idProduct=0001 usb usb6: New USB >> device >> > strings: >> > > Mfr=3, >> > > > > Product=2, >> > > > > > SerialNumber=1 usb usb6: Product: >> UHCI Host >> > > Controller usb >> > > > usb6: >> > > > > > Manufacturer: Linux 2.6.32.9 uhci_hcd >> usb >> > usb6: >> > > > SerialNumber: >> > > > > > 0000:00:1d.0 usb usb6: configuration >> #1 >> > chosen from >> > > 1 >> > > > choice hub >> > > > > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 >> ports >> > > detected >> > > > > xen_allocate_pirq: >> > > > > > returning irq 19 for gsi 19 Already >> setup >> > the GSI >> > > :19 >> > > > uhci_hcd >> > > > > > 0000:00:1d.1: PCI INT B -> GSI 19 >> (level, >> > low) -> >> > > IRQ 19 >> > > > uhci_hcd >> > > > > > 0000:00:1d.1: UHCI Host Controller >> uhci_hcd >> > > 0000:00:1d.1: >> > > > new USB >> > > > > bus >> > > > > > registered, assigned bus number 7 >> uhci_hcd >> > > 0000:00:1d.1: >> > > > irq 19, >> > > > > io base >> > > > > > 0x00002060 usb usb7: New USB device >> found, >> > > idVendor=1d6b, >> > > > > idProduct=0001 >> > > > > > usb usb7: New USB device strings: >> Mfr=3, >> > Product=2, >> > > > > SerialNumber=1 usb >> > > > > > usb7: Product: UHCI Host Controller >> usb >> > usb7: >> > > > Manufacturer: Linux >> > > > > > 2.6.32.9 uhci_hcd usb usb7: >> SerialNumber: >> > > 0000:00:1d.1 usb >> > > > usb7: >> > > > > > configuration #1 chosen from 1 choice >> hub >> > 7-0:1.0: >> > > USB hub >> > > > found >> > > > > hub >> > > > > > 7-0:1.0: 2 ports detected >> xen_allocate_pirq: >> > > returning irq >> > > > 18 for >> > > > > gsi 18 >> > > > > > Already setup the GSI :18 uhci_hcd >> > 0000:00:1d.2: >> > > PCI INT C >> > > > -> GSI >> > > > > 18 >> > > > > > (level, low) -> IRQ 18 uhci_hcd >> > 0000:00:1d.2: UHCI >> > > Host >> > > > > Controller >> > > > > > uhci_hcd 0000:00:1d.2: new USB bus >> > registered, >> > > assigned >> > > > bus >> > > > > number 8 >> > > > > > uhci_hcd 0000:00:1d.2: irq 18, io >> base >> > 0x00002040 >> > > usb >> > > > usb8: New >> > > > > USB >> > > > > > device found, idVendor=1d6b, >> idProduct=0001 >> > usb >> > > usb8: New >> > > > USB >> > > > > device >> > > > > > strings: Mfr=3, Product=2, >> SerialNumber=1 >> > usb usb8: >> > > > Product: UHCI >> > > > > Host >> > > > >> > > >> > > References >> > > >> > > Visible links >> > > 1. mailto:[20][21]pasik@iki.fi >> > > 2. mailto:[21][22]pasik@iki.fi >> > > 3. mailto:[22][23]pasik@iki.fi >> > > 4. mailto:[23][24]pasik@iki.fi >> > > 5. mailto:[24][25]pasik@iki.fi >> > > 6. >> > >> [25][26]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > > 7. >> > >> [26][27]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > > 8. mailto:[27][28]pasik@iki.fi >> > > 9. >> > >> [28][29]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > > 10. >> > >> [29][30]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > > 11. mailto:[30][31]pasik@iki.fi >> > > 12. mailto:[31][32]pasik@iki.fi >> > > 13. >> > >> [32][33]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > > 14. >> > >> [33][34]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > > 15. mailto:[34][35]pasik@iki.fi >> > > 16. >> > >> [35][36]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > > 17. >> > >> [36][37]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > > 18. mailto:[37][38]pasik@iki.fi >> > >> > References >> > >> > Visible links >> > 1. mailto:[39]pasik@iki.fi >> > 2. mailto:[40]pasik@iki.fi >> > 3. mailto:[41]pasik@iki.fi >> > 4. mailto:[42]pasik@iki.fi >> > 5. mailto:[43]pasik@iki.fi >> > 6. mailto:[44]pasik@iki.fi >> > 7. >> [45]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > 8. >> [46]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > 9. mailto:[47]pasik@iki.fi >> > 10. >> [48]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > 11. >> [49]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > 12. mailto:[50]pasik@iki.fi >> > 13. mailto:[51]pasik@iki.fi >> > 14. >> [52]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > 15. >> [53]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > 16. mailto:[54]pasik@iki.fi >> > 17. >> [55]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > 18. >> [56]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > 19. mailto:[57]pasik@iki.fi >> > 20. mailto:[58]pasik@iki.fi >> > 21. mailto:[59]pasik@iki.fi >> > 22. mailto:[60]pasik@iki.fi >> > 23. mailto:[61]pasik@iki.fi >> > 24. mailto:[62]pasik@iki.fi >> > 25. >> [63]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > 26. >> [64]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > 27. mailto:[65]pasik@iki.fi >> > 28. >> [66]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > 29. >> [67]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > 30. mailto:[68]pasik@iki.fi >> > 31. mailto:[69]pasik@iki.fi >> > 32. >> [70]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > 33. >> [71]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > 34. mailto:[72]pasik@iki.fi >> > 35. >> [73]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > 36. >> [74]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> > 37. mailto:[75]pasik@iki.fi >> >> References >> >> Visible links >> 1. mailto:pasik@iki.fi >> 2. mailto:pasik@iki.fi >> 3. mailto:pasik@iki.fi >> 4. mailto:pasik@iki.fi >> 5. mailto:pasik@iki.fi >> 6. mailto:pasik@iki.fi >> 7. mailto:pasik@iki.fi >> 8. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> 9. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> 10. mailto:pasik@iki.fi >> 11. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> 12. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> 13. mailto:pasik@iki.fi >> 14. mailto:pasik@iki.fi >> 15. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> 16. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> 17. mailto:pasik@iki.fi >> 18. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> 19. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> 20. mailto:pasik@iki.fi >> 21. mailto:pasik@iki.fi >> 22. mailto:pasik@iki.fi >> 23. mailto:pasik@iki.fi >> 24. mailto:pasik@iki.fi >> 25. mailto:pasik@iki.fi >> 26. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> 27. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> 28. mailto:pasik@iki.fi >> 29. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> 30. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> 31. mailto:pasik@iki.fi >> 32. mailto:pasik@iki.fi >> 33. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> 34. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> 35. mailto:pasik@iki.fi >> 36. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> 37. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> 38. mailto:pasik@iki.fi >> 39. mailto:pasik@iki.fi >> 40. mailto:pasik@iki.fi >> 41. mailto:pasik@iki.fi >> 42. mailto:pasik@iki.fi >> 43. mailto:pasik@iki.fi >> 44. mailto:pasik@iki.fi >> 45. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> 46. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> 47. mailto:pasik@iki.fi >> 48. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> 49. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> 50. mailto:pasik@iki.fi >> 51. mailto:pasik@iki.fi >> 52. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> 53. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> 54. mailto:pasik@iki.fi >> 55. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> 56. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> 57. mailto:pasik@iki.fi >> 58. mailto:pasik@iki.fi >> 59. mailto:pasik@iki.fi >> 60. mailto:pasik@iki.fi >> 61. mailto:pasik@iki.fi >> 62. mailto:pasik@iki.fi >> 63. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> 64. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> 65. mailto:pasik@iki.fi >> 66. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> 67. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> 68. mailto:pasik@iki.fi >> 69. mailto:pasik@iki.fi >> 70. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> 71. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> 72. mailto:pasik@iki.fi >> 73. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> 74. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >> 75. mailto:pasik@iki.fi >> > > ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs() 2010-03-19 18:22 ` Re: [Xen-users] " Jeremy Fitzhardinge @ 2010-03-19 19:05 ` Pasi Kärkkäinen 2010-03-19 19:57 ` [Xen-devel] " kishore kumar 0 siblings, 1 reply; 32+ messages in thread From: Pasi Kärkkäinen @ 2010-03-19 19:05 UTC (permalink / raw) To: Jeremy Fitzhardinge; +Cc: xen-devel, xen-users, kishore kumar On Fri, Mar 19, 2010 at 11:22:54AM -0700, Jeremy Fitzhardinge wrote: > On 03/19/2010 10:59 AM, Pasi Kärkkäinen wrote: >> On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar wrote: >> >>> Attached is the capture log after changing the grub.conf to >>> >>> ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset >>> initcall_debug debug swiotlb=force apic=debug loglevel=10 >>> >>> for the dom 0 kernel command line. >>> >>> >> Hmm, interesting. Now it seems to crash in a different place. >> >> Jeremy: Have you seen this one earlier? >> > > No, but it looks like the result of "apic=debug" on the kernel command > line. That won't do anything useful (the kernel has no APICs, they all > belong to Xen), and can only cause harm. As it appears to have done. > Ok, my bad. So please remove the "apic=debug" from the dom0 kernel cmdline and try again. It should look like this: ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10 -- Pasi > J > >> .... IRQ redirection table: >> NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: >> 00 000 0 0 0 0 0 0 0 00 >> IRQ to pin mappings: >> BUG: unable to handle kernel NULL pointer dereference at (null) >> IP: [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 >> PGD 0 >> Oops: 0000 [#1] SMP >> last sysfs file: >> CPU 0 >> Modules linked in: >> Pid: 1, comm: swapper Not tainted 2.6.32.10 #2 >> RIP: e030:[<ffffffff819bf0e0>] [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 >> RSP: e02b:ffff880064edbe20 EFLAGS: 00010286 >> RAX: ffffffff816ed2c0 RBX: 0000000000000000 RCX: 000000000f640f01 >> RDX: ffff880066808000 RSI: ffff880064edbd40 RDI: 0000000000000000 >> RBP: ffff880064edbea0 R08: 0000000000000002 R09: 0000000000000000 >> R10: 0000000000000000 R11: ffff880064edbce0 R12: 0000000000000000 >> R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 >> FS: 0000000000000000(0000) GS:ffff880005ec8000(0000) knlGS:0000000000000000 >> CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b >> CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002660 >> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 >> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 >> Process swapper (pid: 1, threadinfo ffff880064eda000, task ffff880064ee0000) >> Stack: >> ffff880000000000 ffffffff00000000 ffff880000000000 ffffffff811ebee8 >> <0> ffff880064edbe60 0000000181083e7c 000000ff00000002 0000000000000002 >> <0> ffff880000000000 ffffffff810846f0 ffffffff817ce660 00000000291fd332 >> Call Trace: >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93 >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc >> [<ffffffff81013eaa>] child_rip+0xa/0x20 >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc >> [<ffffffff81013810>] ? restore_args+0x0/0x30 >> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20 >> Code: 45 b0 0f 8c 5b fd ff ff 48 c7 c7 34 40 60 81 31 c0 45 31 e4 e8 11 d5 69 ff 31 ff e8 67 b5 6f ff eb 5a 48 85 c0 74 4a 48 8b 58 40<48> 83 3b 00 74 40 44 89 e6 48 c7 c7 4d 40 60 81 31 c0 e8 e8 d4 >> RIP [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 >> RSP<ffff880064edbe20> >> CR2: 0000000000000000 >> ---[ end trace 0007ad9d59420718 ]--- >> swapper used greatest stack depth: 4168 bytes left >> Kernel panic - not syncing: Attempted to kill init! >> Pid: 1, comm: swapper Tainted: G D 2.6.32.10 #2 >> Call Trace: >> [<ffffffff8105b747>] panic+0xa5/0x167 >> [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf >> [<ffffffff8105f2b3>] ? do_exit+0x38a/0x701 >> [<ffffffff8100f43f>] ? xen_restore_fl_direct_end+0x0/0x1 >> [<ffffffff8108f823>] ? lock_release+0x179/0x184 >> [<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf >> [<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c >> [<ffffffff8105efa7>] do_exit+0x7e/0x701 >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef >> [<ffffffff8147764c>] oops_end+0xbf/0xc7 >> [<ffffffff81038a02>] no_context+0x1f1/0x200 >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef >> [<ffffffff81038c61>] __bad_area_nosemaphore+0x191/0x1b4 >> [<ffffffff8100f452>] ? check_events+0x12/0x20 >> [<ffffffff81038d0e>] bad_area_nosemaphore+0x13/0x15 >> [<ffffffff81478b20>] do_page_fault+0x16d/0x2a2 >> [<ffffffff814769d5>] page_fault+0x25/0x30 >> [<ffffffff819bf0e0>] ? print_all_ICs+0x487/0x500 >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93 >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc >> [<ffffffff81013eaa>] child_rip+0xa/0x20 >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc >> [<ffffffff81013810>] ? restore_args+0x0/0x30 >> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20 >> >> >> -- Pasi >> >> >> >>> >>> On Thu, Mar 18, 2010 at 2:27 PM, Pasi Kärkkäinen<[1]pasik@iki.fi> wrote: >>> >>> On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar wrote: >>> > pvdisplay does not work in my RHEL machine. >>> > >>> > I did pvscan. >>> > below is the output. >>> > >>> > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free] >>> > >>> > Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no VG: 0 [0 ] >>> > >>> >>> Ok so /dev/sda2 is the correct device holding the VolGroup01. >>> >>> Looking at your latest capture.doc I see this: >>> >>> Command line: ro root=/dev/vg00/lv01 console=hvc0 earlyprintk=xen >>> nomodeset initcall_debug debug swiotlb=force apic=debug loglevel=10 >>> >>> So your root= parameter is wrong! Edit grub.conf and replace it with the >>> actual root device: >>> root=/dev/VolGroup01/LogVol00 >>> >>> -- Pasi >>> >>> > On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen >>> <[1][2]pasik@iki.fi> wrote: >>> > >>> > On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore kumar wrote: >>> > > I did the below steps for pvops dom 0 kernel. >>> > > >>> > > make menuconfig >>> > > make bzImage >>> > > make modules >>> > > make modules_install >>> > > cp -a .config /boot/config-2.6.32.10 >>> > > cp -a System.map /boot/System.map-2.6.32.10 >>> > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10 >>> > > /sbin/mkinitrd -f --builtin=ahci /boot/initrd-2.6.32.10.img >>> > 2.6.32.10 >>> > > I tried root=/dev/VolGroup01/LogVol00 . >>> > > >>> > >>> > Ok. >>> > >>> > Please run "pvdisplay" to see which actual partition is the LVM >>> PV for >>> > your >>> > volume group. >>> > >>> > Also if you're running Fedora 12 you could try generating an >>> initrd >>> > image >>> > with dracut instead of mkinitrd. >>> > >>> > -- Pasi >>> > >>> > > >>> > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen >>> > <[1][2][3]pasik@iki.fi> wrote: >>> > > >>> > > On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore kumar >>> wrote: >>> > > > Here is the output of df -h and cat /etc/fstab of my >>> > machine. >>> > > > >>> > > >>> > > Did you try both root=/dev/mapper/VolGroup01-LogVol00 and >>> > > root=/dev/VolGroup01/LogVol00 arguments for the dom0 >>> kernel? >>> > > >>> > > How did you generate the initrd image for the dom0 kernel? >>> > > >>> > > Anyway this sounds like a grub.conf or initrd problem, not >>> Xen or >>> > pvops >>> > > dom0 kernel kernel problem. >>> > > >>> > > -- Pasi >>> > > >>> > > > Please let me know your thoughts. >>> > > > >>> > > > [root@localhost kishore]# df -h >>> > > > >>> > > > Filesystem Size Used Avail Use% Mounted on >>> > > > >>> > > > /dev/mapper/VolGroup01-LogVol00 >>> > > > >>> > > > 223G 29G 182G 14% >>> / >>> > > > >>> > > > /dev/sda1 99M 81M 13M 87% /boot >>> > > > >>> > > > tmpfs 757M 0 757M 0% /dev/shm >>> > > > >>> > > > [root@localhost kishore]# cat /etc/fstab >>> > > > >>> > > > /dev/VolGroup01/LogVol00 / ext3 defaults 1 1 >>> > > > >>> > > > LABEL=/boot /boot ext3 defaults 1 2 >>> > > > >>> > > > tmpfs /dev/shm tmpfs defaults 0 0 >>> > > > >>> > > > devpts /dev/pts devpts gid=5,mode=620 0 0 >>> > > > >>> > > > sysfs /sys sysfs defaults 0 0 >>> > > > >>> > > > proc /proc proc defaults 0 0 >>> > > > >>> > > > /dev/VolGroup01/LogVol01 swap swap defaults 0 0 >>> > > > >>> > > > [root@localhost kishore]# >>> > > > >>> > > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen >>> > > <[1][2][3][4]pasik@iki.fi> wrote: >>> > > > >>> > > > On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore >>> kumar >>> > wrote: >>> > > > > I am not sure. Can you please let me know how >>> to >>> > check >>> > > this? any >>> > > > command >>> > > > > ?? >>> > > > >>> > > > well simple "df -h" will show it. and also "cat >>> > /etc/fstab". >>> > > > You can also check it from your grub >>> configuration.. from >>> > the >>> > > working >>> > > > baremetal (non-Xen) entry. >>> > > > >>> > > > -- Pasi >>> > > > > >>> > > > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi >>> Kärkkäinen >>> > > > <[1][2][3][4][5]pasik@iki.fi> wrote: >>> > > > > >>> > > > > On Tue, Mar 16, 2010 at 03:22:50PM -0700, >>> kishore >>> > kumar >>> > > wrote: >>> > > > > > attached is the log captured in with >>> the word >>> > > document . >>> > > > > > >>> > > > > >>> > > > > Scanning logical volumes >>> > > > > Reading all physical volumes. This may >>> take a >>> > while... >>> > > > > Activating logical volumes >>> > > > > Volume group "VolGroup01" not found >>> > > > > Trying to resume from >>> /dev/VolGroup01/LogVol01 >>> > > > > Unable to access resume device >>> > (/dev/VolGroup01/LogVol01) >>> > > > > Creating root device. >>> > > > > Mounting root filesystem. >>> > > > > mount: could not find filesystem '/dev/root' >>> > > > > Setting up other filesystems. >>> > > > > Setting up new root fs >>> > > > > setuproot: moving /dev failed: No such file >>> or >>> > directory >>> > > > > no fstab.sys, mounting internal defaults >>> > > > > setuproot: error mounting /proc: No such >>> file or >>> > directory >>> > > > > setuproot: error mounting /sys: No such file >>> or >>> > directory >>> > > > > Switching to new root and running init. >>> > > > > unmounting old /dev >>> > > > > unmounting old /proc >>> > > > > unmounting old /sys >>> > > > > switchroot: mount failed: No such file or >>> directory >>> > > > > init used greatest stack depth: 4088 bytes >>> left >>> > > > > Kernel panic - not syncing: Attempted to >>> kill init! >>> > > > > >>> > > > > So it seems it gets all the way to executing >>> the >>> > initrd >>> > > image, >>> > > > > which then fails to mount the root fs. >>> > > > > >>> > > > > Earlier in the log: >>> > > > > ata1: SATA link up 3.0 Gbps (SStatus 123 >>> SControl >>> > 300) >>> > > > > ata1.00: ATA-8: Hitachi HDT721025SLA380, >>> STBOA3AA, >>> > max >>> > > UDMA/133 >>> > > > > ata1.00: 488397168 sectors, multi 0: LBA48 >>> NCQ >>> > (depth >>> > > 31/32), AA >>> > > > > ata1.00: configured for UDMA/133 >>> > > > > scsi 0:0:0:0: Direct-Access ATA >>> Hitachi >>> > HDT72102 >>> > > STBO >>> > > > PQ: 0 >>> > > > > ANSI: 5 >>> > > > > sd 0:0:0:0: Attached scsi generic sg0 type 0 >>> > > > > sd 0:0:0:0: [sda] 488397168 512-byte logical >>> > blocks: (250 >>> > > GB/232 >>> > > > GiB) >>> > > > > sd 0:0:0:0: [sda] Write Protect is off >>> > > > > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>> > > > > sd 0:0:0:0: [sda] Write cache: enabled, read >>> cache: >>> > > enabled, >>> > > > doesn't >>> > > > > support DPO or FUA >>> > > > > sda: sda1 sda2 >>> > > > > sd 0:0:0:0: [sda] Attached SCSI disk >>> > > > > >>> > > > > so /dev/sda was detected. Is your root lvm >>> volume >>> > on >>> > > /dev/sda ? >>> > > > > Is /dev/VolGroup01/LogVol01 really your root >>> fs? >>> > > > > >>> > > > > -- Pasi >>> > > > > >>> > > > > > >>> > > > > > >>> > > > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi >>> > Kärkkäinen >>> > > > > <[1][2][3][4][5][6]pasik@iki.fi> wrote: >>> > > > > > >>> > > > > > On Tue, Mar 16, 2010 at 02:56:06PM >>> -0700, >>> > kishore >>> > > kumar >>> > > > wrote: >>> > > > > > > Please find the attached log >>> file after >>> > fixing >>> > > the >>> > > > dom 0 >>> > > > > kernel cmd >>> > > > > > line >>> > > > > > > as below >>> > > > > > > >>> > > > > > > ro root=/dev/VolGroup01/LogVol00 >>> > console=hvc0 >>> > > > > earlyprintk=xen >>> > > > > > nomodeset >>> > > > > > > >>> > > > > > >>> > > > > > There's something wrong with the log, >>> the >>> > dom0 >>> > > kernel >>> > > > parts are >>> > > > > all on >>> > > > > > one line.. >>> > > > > > It's really difficult to read it. >>> > > > > > >>> > > > > > -- Pasi >>> > > > > > >>> > > > > > > Thanks >>> > > > > > > >>> > > > > > > >>> > > > > > > On Tue, Mar 16, 2010 at 2:29 PM, >>> Pasi >>> > > Kärkkäinen >>> > > > > > <[1][2][3][4][5][6][7]pasik@iki.fi> >>> wrote: >>> > > > > > > >>> > > > > > > On Tue, Mar 16, 2010 at >>> 02:16:22PM >>> > -0700, >>> > > kishore >>> > > > kumar >>> > > > > wrote: >>> > > > > > > > I did below steps. >>> > > > > > > > >>> > > > > > > > >>> > > > > > > > I pulled DOM 0 kernel >>> from >>> > > > > > > > git clone >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > >>> git://[1][2][3][4][5][6][7][8]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > > > > > > > linux-2.6-xen >>> > > > > > > > >>> > > > > > > > cd linux-2.6-xen >>> > > > > > > > >>> > > > > > > > make clean >>> > > > > > > > >>> > > > > > > > cp -a .config .config-old >>> > > > > > > > >>> > > > > > > > wget -O .config >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > >>> [2][3][4][5][6][7][8][9]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > > > > > > > >>> > > > > > > > make oldconfig >>> > > > > > > > >>> > > > > > > > make bzImage >>> > > > > > > > >>> > > > > > > > make modules >>> > > > > > > > >>> > > > > > > > make modules_install >>> > > > > > > > >>> > > > > > > > cp -a .config >>> > /boot/config-2.6.32.9 >>> > > > > > > > >>> > > > > > > > cp -a System.map >>> > > /boot/System.map-2.6.32.9 >>> > > > > > > > >>> > > > > > > > cp -a >>> arch/x86/boot/bzImage >>> > > > /boot/vmlinuz-2.6.32.9 >>> > > > > > > > >>> > > > > > > > and modified the >>> grub.conf as >>> > below >>> > > > > > > > >>> > > > > > > > >>> > > > > > > > Root(hd0,0) >>> > > > > > > > >>> > > > > > > > kernel /xen.gz >>> console=vga,com1 >>> > > > com1=115200,8n1 >>> > > > > msi=1 >>> > > > > > iommu=1 >>> > > > > > > > >>> > > > > > > > module /vmlinuz-2.6.32.9 >>> ro >>> > > > > root=/dev/VolGroup01/LogVo100 >>> > > > > > rhgb >>> > > > > > > quiet >>> > > > > > > > >>> > > > > > > > module >>> /initrd-2.6.32.9.img >>> > > > > > > > >>> > > > > > > > >>> > > > > > > > and rebooted the machine. >>> Then >>> > It >>> > > booted with >>> > > > some >>> > > > > xen >>> > > > > > messages >>> > > > > > > and >>> > > > > > > > stopped. Those were the >>> > messages >>> > > captured >>> > > > from >>> > > > > serial >>> > > > > > console. >>> > > > > > > > >>> > > > > > > > Please let me know if I >>> did >>> > something >>> > > wrong >>> > > > here. >>> > > > > > > > >>> > > > > > > >>> > > > > > > Please fix the kernel cmdline >>> based >>> > on my >>> > > earlier >>> > > > email, >>> > > > > and >>> > > > > > capture and >>> > > > > > > post the >>> > > > > > > serial console log again! >>> > > > > > > >>> > > > > > > -- Pasi >>> > > > > > > > >>> > > > > > > > >>> > > > > > > > On Tue, Mar 16, 2010 at >>> 1:20 PM, >>> > Pasi >>> > > > Kärkkäinen >>> > > > > > > >>> <[3][4][5][6][7][8][9][10]pasik@iki.fi> >>> > wrote: >>> > > > > > > > >>> > > > > > > > On Tue, Mar 16, 2010 at >>> > 01:16:28PM >>> > > -0700, >>> > > > Jeremy >>> > > > > > Fitzhardinge >>> > > > > > > wrote: >>> > > > > > > > > On 03/16/2010 12:48 >>> PM, Pasi >>> > > Kärkkäinen >>> > > > wrote: >>> > > > > > > > >> On Tue, Mar 16, 2010 >>> at >>> > 09:43:44PM >>> > > +0200, >>> > > > Pasi >>> > > > > > Kärkkäinen >>> > > > > > > wrote: >>> > > > > > > > >> >>> > > > > > > > >>> On Tue, Mar 16, >>> 2010 at >>> > > 10:32:17AM >>> > > > -0700, >>> > > > > kishore >>> > > > > > kumar >>> > > > > > > wrote: >>> > > > > > > > >>> >>> > > > > > > > >>>> Attached is >>> the >>> > output >>> > > captured >>> > > > from >>> > > > > serial >>> > > > > > console. >>> > > > > > > > >>>> >>> > > > > > > > >>>> Machine does >>> not boot >>> > after >>> > > > compiling xen >>> > > > > 3.4.3 >>> > > > > > with >>> > > > > > > pv_ops dom >>> > > > > > > > 0 kernel. >>> > > > > > > > >>>> >>> > > > > > > > >>>> Please let me >>> know >>> > what is >>> > > going >>> > > > wrong >>> > > > > here. >>> > > > > > > > >>>> >>> > > > > > > > >>>> >>> > > > > > > > >>> Ok this looks like >>> a bug >>> > that is >>> > > already >>> > > > being >>> > > > > sorted >>> > > > > > out on >>> > > > > > > > xen-devel mailinglist. >>> > > > > > > > >>> I added CC to >>> xen-devel. >>> > > > > > > > >>> >>> > > > > > > > >>> >>> > > > > > > > >> >>> > > > > > > > > >>> > > > > > > > > Those messages are >>> not a >>> > problem in >>> > > > themselves, >>> > > > > but the >>> > > > > > related >>> > > > > > > > problem >>> > > > > > > > > is believed to be >>> fixed in >>> > current >>> > > > > xen/stable-2.6.32.x. >>> > > > > > It >>> > > > > > > looks like >>> > > > > > > > > the output stops >>> there >>> > because the >>> > > Xen >>> > > > console >>> > > > > isn't set >>> > > > > > up >>> > > > > > > properly >>> > > > > > > > for >>> > > > > > > > > some reason. >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > > Yeah, remove "rhgb >>> quiet" from >>> > the >>> > > options.. >>> > > > the >>> > > > > dom0 >>> > > > > > kernel >>> > > > > > > cmdline >>> > > > > > > > should be like this: >>> > > > > > > > ro >>> > root=/dev/VolGroup01/LogVol00 >>> > > > console=hvc0 >>> > > > > > earlyprintk=xen >>> > > > > > > nomodeset >>> > > > > > > > -- Pasi >>> > > > > > > > >>> > > > > > > > References >>> > > > > > > > >>> > > > > > > > Visible links >>> > > > > > > > 1. >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > >>> [5][6][7][8][9][10][11]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > > > > > > > 2. >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > >>> [6][7][8][9][10][11][12]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > > > > > > > 3. >>> > mailto:[7][8][9][10][11][12][13]pasik@iki.fi >>> > > > > > > >>> > > > > > > References >>> > > > > > > >>> > > > > > > Visible links >>> > > > > > > 1. >>> > mailto:[9][10][11][12][13][14]pasik@iki.fi >>> > > > > > > 2. >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > >>> [10][11][12][13][14][15]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > > > > > > 3. >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > >>> [11][12][13][14][15][16]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > > > > > > 4. >>> > mailto:[12][13][14][15][16][17]pasik@iki.fi >>> > > > > > > 5. >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > >>> [13][14][15][16][17][18]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > > > > > > 6. >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > >>> [14][15][16][17][18][19]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > > > > > > 7. >>> > mailto:[15][16][17][18][19][20]pasik@iki.fi >>> > > > > > > Asserting Post complete GPIO!!! >>> > > > > > > Transfer control to CSM 16-bit >>> binary for >>> > legacy >>> > > boot >>> > > > > > > __ __ _____ _ _ >>> _____ >>> > > _ _ >>> > > > > > > \ \/ /___ _ __ |___ /| || | >>> |___ / >>> > _ __ >>> > > ___| || | >>> > > > _ >>> > > > > __ _ >>> > > > > > __ ___ >>> > > > > > > \ // _ \ '_ \ |_ \| || |_ >>> |_ \ __| >>> > '__/ >>> > > __| || >>> > > > |_ __| >>> > > > > '_ \| >>> > > > > > '__/ _ \ >>> > > > > > > / \ __/ | | | ___) |__ _| >>> ___) |__| >>> > | | >>> > > (__|__ >>> > > > _|__| >>> > > > > |_) | | >>> > > > > > | __/ >>> > > > > > > /_/\_\___|_| |_| |____(_) >>> |_|(_)____/ >>> > |_| >>> > > \___| |_| >>> > > > | >>> > > > > .__/|_| >>> > > > > > \___| >>> > > > > > > >>> > > > |_| >>> > > > > > > (XEN) Xen version 3.4.3-rc4-pre >>> > > (kishore@localdomain) >>> > > > (gcc >>> > > > > version >>> > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) >>> Mon Mar >>> > 15 >>> > > 13:44:31 PDT >>> > > > 2010 >>> > > > > > > (XEN) Latest ChangeSet: Tue Mar 09 >>> > 18:15:52 2010 >>> > > +0000 >>> > > > > > 19924:6e72f8c3c017 >>> > > > > > > (XEN) Command line: >>> console=vga,com1 >>> > > com1=115200,8n1 >>> > > > msi=1 >>> > > > > iommu=1 >>> > > > > > > (XEN) Video information: >>> > > > > > > (XEN) VGA is text mode 80x25, font >>> 8x16 >>> > > > > > > (XEN) VBE/DDC methods: none; EDID >>> > transfer time: >>> > > 0 >>> > > > seconds >>> > > > > > > (XEN) EDID info not retrieved >>> because no >>> > DDC >>> > > retrieval >>> > > > method >>> > > > > > detected >>> > > > > > > (XEN) Disc information: >>> > > > > > > (XEN) Found 1 MBR signatures >>> > > > > > > (XEN) Found 1 EDD information >>> structures >>> > > > > > > (XEN) Xen-e820 RAM map: >>> > > > > > > (XEN) 0000000000000000 - >>> 000000000009d000 >>> > > (usable) >>> > > > > > > (XEN) 000000000009d000 - >>> 00000000000a0000 >>> > > (reserved) >>> > > > > > > (XEN) 00000000000e0000 - >>> 0000000000100000 >>> > > (reserved) >>> > > > > > > (XEN) 0000000000100000 - >>> 000000006d597000 >>> > > (usable) >>> > > > > > > (XEN) 000000006d597000 - >>> 000000006d686000 >>> > > (reserved) >>> > > > > > > (XEN) 000000006d686000 - >>> 000000006f598000 >>> > > (usable) >>> > > > > > > (XEN) 000000006f598000 - >>> 000000006f59a000 >>> > > (reserved) >>> > > > > > > (XEN) 000000006f59a000 - >>> 000000006f5af000 >>> > (ACPI >>> > > NVS) >>> > > > > > > (XEN) 000000006f5af000 - >>> 000000006f5d9000 >>> > > (reserved) >>> > > > > > > (XEN) 000000006f5d9000 - >>> 000000006f5f9000 >>> > (ACPI >>> > > data) >>> > > > > > > (XEN) 000000006f5f9000 - >>> 000000006f6df000 >>> > (ACPI >>> > > NVS) >>> > > > > > > (XEN) 000000006f6df000 - >>> 000000006f700000 >>> > (ACPI >>> > > data) >>> > > > > > > (XEN) 000000006f700000 - >>> 0000000080000000 >>> > > (reserved) >>> > > > > > > (XEN) 00000000a0000000 - >>> 00000000b0000000 >>> > > (reserved) >>> > > > > > > (XEN) 00000000fc000000 - >>> 00000000fd000000 >>> > > (reserved) >>> > > > > > > (XEN) 00000000fed1c000 - >>> 00000000fed20000 >>> > > (reserved) >>> > > > > > > (XEN) 00000000ffc00000 - >>> 0000000100000000 >>> > > (reserved) >>> > > > > > > (XEN) System RAM: 1780MB >>> (1823000kB) >>> > > > > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 >>> INTEL >>> > ) >>> > > > > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 >>> INTEL >>> > THRLY >>> > > > 0 >>> > > > > > 1000013) >>> > > > > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 >>> INTEL >>> > THRLY >>> > > > 0 >>> > > > > MSFT >>> > > > > > 100000D) >>> > > > > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 >>> INTEL >>> > THRLY >>> > > > 3 >>> > > > > MSFT >>> > > > > > 100000D) >>> > > > > > > (XEN) ACPI: FACS 6F5F9000, 0040 >>> > > > > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 >>> INTEL >>> > THRLY >>> > > > 0 >>> > > > > MSFT >>> > > > > > 100000D) >>> > > > > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 >>> INTEL >>> > THRLY >>> > > > 1 >>> > > > > MSFT >>> > > > > > 100000D) >>> > > > > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 >>> INTEL >>> > THRLY >>> > > > 1 >>> > > > > MSFT >>> > > > > > 100000D) >>> > > > > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 >>> INTEL >>> > THRLY >>> > > > 1 >>> > > > > MSFT >>> > > > > > 100000D) >>> > > > > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 >>> INTEL >>> > THRLY >>> > > > 0 >>> > > > > MSFT >>> > > > > > 100000D) >>> > > > > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC >>> (r1 >>> > INTEL SSDT >>> > > PM >>> > > > 4000 >>> > > > > INTL >>> > > > > > 20061109) >>> > > > > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 >>> INTEL >>> > THRLY >>> > > > 1 >>> > > > > MSFT >>> > > > > > 100000D) >>> > > > > > > (XEN) Domain heap initialised >>> > > > > > > (XEN) Processor #0 6:12 APIC >>> version 21 >>> > > > > > > (XEN) Processor #2 6:12 APIC >>> version 21 >>> > > > > > > (XEN) Processor #4 6:12 APIC >>> version 21 >>> > > > > > > (XEN) Processor #16 6:12 APIC >>> version 21 >>> > > > > > > (XEN) Processor #18 6:12 APIC >>> version 21 >>> > > > > > > (XEN) Processor #20 6:12 APIC >>> version 21 >>> > > > > > > (XEN) Processor #1 6:12 APIC >>> version 21 >>> > > > > > > (XEN) Processor #3 6:12 APIC >>> version 21 >>> > > > > > > (XEN) Processor #5 6:12 APIC >>> version 21 >>> > > > > > > (XEN) Processor #17 6:12 APIC >>> version 21 >>> > > > > > > (XEN) Processor #19 6:12 APIC >>> version 21 >>> > > > > > > (XEN) Processor #21 6:12 APIC >>> version 21 >>> > > > > > > (XEN) IOAPIC[0]: apic_id 8, version >>> 32, >>> > address >>> > > > 0xfec00000, GSI >>> > > > > 0-23 >>> > > > > > > (XEN) IOAPIC[1]: apic_id 9, version >>> 32, >>> > address >>> > > > 0xfec90000, GSI >>> > > > > 24-47 >>> > > > > > > (XEN) Enabling APIC mode: Phys. >>> Using 2 >>> > I/O >>> > > APICs >>> > > > > > > (XEN) Intel VT-d DMAR tables have >>> been >>> > parsed. >>> > > > > > > (XEN) Using scheduler: SMP Credit >>> > Scheduler >>> > > (credit) >>> > > > > > > (XEN) Detected 3200.207 MHz >>> processor. >>> > > > > > > (XEN) VMX: Supported advanced >>> features: >>> > > > > > > (XEN) - APIC MMIO access >>> virtualisation >>> > > > > > > (XEN) - APIC TPR shadow >>> > > > > > > (XEN) - Extended Page Tables (EPT) >>> > > > > > > (XEN) - Virtual-Processor >>> Identifiers >>> > (VPID) >>> > > > > > > (XEN) - Virtual NMI >>> > > > > > > (XEN) - MSR direct-access bitmap >>> > > > > > > (XEN) VMX: EPT is available. >>> > > > > > > (XEN) VMX: VPID is available. >>> > > > > > > (XEN) HVM: VMX enabled >>> > > > > > > (XEN) HVM: Hardware Assisted Paging >>> > detected. >>> > > > > > > (XEN) CPU0: Intel Genuine Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor 1/2 eip >>> 88000 >>> > > > > > > (XEN) CPU1: Intel Genuine Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor 2/4 eip >>> 88000 >>> > > > > > > (XEN) CPU2: Intel Genuine Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor 3/16 eip >>> 88000 >>> > > > > > > (XEN) CPU3: Intel Genuine Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor 4/18 eip >>> 88000 >>> > > > > > > (XEN) CPU4: Intel Genuine Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor 5/20 eip >>> 88000 >>> > > > > > > (XEN) CPU5: Intel Genuine Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor 6/1 eip >>> 88000 >>> > > > > > > (XEN) CPU6: Intel Genuine Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor 7/3 eip >>> 88000 >>> > > > > > > (XEN) CPU7: Intel Genuine Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor 8/5 eip >>> 88000 >>> > > > > > > (XEN) CPU8: Intel Genuine Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor 9/17 eip >>> 88000 >>> > > > > > > (XEN) CPU9: Intel Genuine Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor 10/19 eip >>> 88000 >>> > > > > > > (XEN) CPU10: Intel Genuine Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor 11/21 eip >>> 88000 >>> > > > > > > (XEN) CPU11: Intel Genuine Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Total of 12 processors >>> activated. >>> > > > > > > (XEN) ENABLING IO-APIC IRQs >>> > > > > > > (XEN) -> Using new ACK method >>> > > > > > > (XEN) checking TSC synchronization >>> across >>> > 12 >>> > > CPUs: >>> > > > passed. >>> > > > > > > (XEN) Platform timer is 14.318MHz >>> HPET >>> > > > > > > ?(XEN) Brought up 12 CPUs >>> > > > > > > (XEN) Intel VT-d Snoop Control >>> supported. >>> > > > > > > (XEN) Intel VT-d DMA Passthrough >>> not >>> > supported. >>> > > > > > > (XEN) Intel VT-d Queued >>> Invalidation >>> > supported. >>> > > > > > > (XEN) Intel VT-d Interrupt >>> Remapping >>> > supported. >>> > > > > > > (XEN) I/O virtualisation enabled >>> > > > > > > (XEN) I/O virtualisation for PV >>> guests >>> > disabled >>> > > > > > > (XEN) xenoprof: Initialization >>> failed. >>> > Intel >>> > > processor >>> > > > model 44 >>> > > > > for P6 >>> > > > > > class family is not supported >>> > > > > > > (XEN) *** LOADING DOMAIN 0 *** >>> > > > > > > (XEN) Xen kernel: 64-bit, lsb, >>> compat32 >>> > > > > > > (XEN) Dom0 kernel: 64-bit, PAE, >>> lsb, >>> > paddr >>> > > 0x1000000 -> >>> > > > > 0x26bb000 >>> > > > > > > (XEN) PHYSICAL MEMORY ARRANGEMENT: >>> > > > > > > (XEN) Dom0 alloc.: >>> > > 0000000064000000->0000000068000000 >>> > > > > (404490 pages >>> > > > > > to be allocated) >>> > > > > > > (XEN) VIRTUAL MEMORY ARRANGEMENT: >>> > > > > > > (XEN) Loaded kernel: >>> > > ffffffff81000000->ffffffff826bb000 >>> > > > > > > (XEN) Init. ramdisk: >>> > > ffffffff826bb000->ffffffff82d0d800 >>> > > > > > > (XEN) Phys-Mach map: >>> > > ffffffff82d0e000->ffffffff83044050 >>> > > > > > > (XEN) Start info: >>> > > ffffffff83045000->ffffffff830454b4 >>> > > > > > > (XEN) Page tables: >>> > > ffffffff83046000->ffffffff83063000 >>> > > > > > > (XEN) Boot stack: >>> > > ffffffff83063000->ffffffff83064000 >>> > > > > > > (XEN) TOTAL: >>> > > ffffffff80000000->ffffffff83400000 >>> > > > > > > (XEN) ENTRY ADDRESS: >>> ffffffff819c1200 >>> > > > > > > (XEN) Dom0 has maximum 12 VCPUs >>> > > > > > > (XEN) Scrubbing Free RAM: .done. >>> > > > > > > (XEN) Xen trace buffers: disabled >>> > > > > > > (XEN) Std. Loglevel: Errors and >>> warnings >>> > > > > > > (XEN) Guest Loglevel: Nothing >>> > (Rate-limited: >>> > > Errors and >>> > > > > warnings) >>> > > > > > > (XEN) Xen is relinquishing VGA >>> console. >>> > > > > > > (XEN) *** Serial input -> DOM0 >>> (type >>> > 'CTRL-a' >>> > > three >>> > > > times to >>> > > > > switch >>> > > > > > input to Xen) >>> > > > > > > (XEN) Freed 128kB init memory. >>> > > > > > > mapping kernel into physical memory >>> > > > > > > Xen: setup ISA identity maps >>> > > > > > > about to get started... >>> > > > > > > Initializing cgroup subsys cpuset >>> > > > > > > Initializing cgroup subsys cpu >>> > > > > > > Linux version 2.6.32.9 >>> > > (kishore@localhost.localdomain) >>> > > > (gcc >>> > > > > version >>> > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 >>> SMP >>> > Mon Mar >>> > > 15 >>> > > > 15:16:28 PDT >>> > > > > 2010 >>> > > > > > > Command line: ro >>> > root=/dev/VolGroup01/LogVol00 >>> > > > console=hvc0 >>> > > > > > earlyprintk=xen nomodeset >>> > > > > > > KERNEL supported cpus: >>> > > > > > > Intel GenuineIntel >>> > > > > > > AMD AuthenticAMD >>> > > > > > > Centaur CentaurHauls >>> > > > > > > BIOS-provided physical RAM map: >>> > > > > > > Xen: 0000000000000000 - >>> 000000000009d000 >>> > > (usable) >>> > > > > > > Xen: 000000000009d000 - >>> 0000000000100000 >>> > > (reserved) >>> > > > > > > Xen: 0000000000100000 - >>> 0000000066c0a000 >>> > > (usable) >>> > > > > > > Xen: 000000006d597000 - >>> 000000006d686000 >>> > > (reserved) >>> > > > > > > Xen: 000000006f598000 - >>> 000000006f59a000 >>> > > (reserved) >>> > > > > > > Xen: 000000006f59a000 - >>> 000000006f5af000 >>> > (ACPI >>> > > NVS) >>> > > > > > > Xen: 000000006f5af000 - >>> 000000006f5d9000 >>> > > (reserved) >>> > > > > > > Xen: 000000006f5d9000 - >>> 000000006f5f9000 >>> > (ACPI >>> > > data) >>> > > > > > > Xen: 000000006f5f9000 - >>> 000000006f6df000 >>> > (ACPI >>> > > NVS) >>> > > > > > > Xen: 000000006f6df000 - >>> 000000006f700000 >>> > (ACPI >>> > > data) >>> > > > > > > Xen: 000000006f700000 - >>> 0000000080000000 >>> > > (reserved) >>> > > > > > > Xen: 00000000a0000000 - >>> 00000000b0000000 >>> > > (reserved) >>> > > > > > > Xen: 00000000fc000000 - >>> 00000000fd000000 >>> > > (reserved) >>> > > > > > > Xen: 00000000fed1c000 - >>> 00000000fed20000 >>> > > (reserved) >>> > > > > > > Xen: 00000000ffc00000 - >>> 0000000100000000 >>> > > (reserved) >>> > > > > > > bootconsole [xenboot0] enabled >>> > > > > > > DMI 2.4 present. >>> > > > > > > last_pfn = 0x66c0a max_arch_pfn = >>> > 0x400000000 >>> > > > > > > init_memory_mapping: >>> > > 0000000000000000-0000000066c0a000 >>> > > > > > > RAMDISK: 026bb000 - 02d0d800 >>> > > > > > > ACPI: RSDP 00000000000f03f0 00024 >>> (v02 >>> > INTEL ) >>> > > > > > > ACPI: XSDT 000000006f6fe120 00064 >>> (v01 >>> > INTEL >>> > > THRLY >>> > > > 00000000 >>> > > > > > 01000013) >>> > > > > > > ACPI: FACP 000000006f6fd000 000F4 >>> (v04 >>> > INTEL >>> > > THRLY >>> > > > 00000000 >>> > > > > MSFT >>> > > > > > 0100000D) >>> > > > > > > ACPI: DSDT 000000006f6f5000 074F1 >>> (v02 >>> > INTEL >>> > > THRLY >>> > > > 00000003 >>> > > > > MSFT >>> > > > > > 0100000D) >>> > > > > > > ACPI: FACS 000000006f5f9000 00040 >>> > > > > > > ACPI: APIC 000000006f6f4000 001CC >>> (v02 >>> > INTEL >>> > > THRLY >>> > > > 00000000 >>> > > > > MSFT >>> > > > > > 0100000D) >>> > > > > > > ACPI: MCFG 000000006f6f3000 0003C >>> (v01 >>> > INTEL >>> > > THRLY >>> > > > 00000001 >>> > > > > MSFT >>> > > > > > 0100000D) >>> > > > > > > ACPI: HPET 000000006f6f2000 00038 >>> (v01 >>> > INTEL >>> > > THRLY >>> > > > 00000001 >>> > > > > MSFT >>> > > > > > 0100000D) >>> > > > > > > ACPI: SLIT 000000006f6f1000 00030 >>> (v01 >>> > INTEL >>> > > THRLY >>> > > > 00000001 >>> > > > > MSFT >>> > > > > > 0100000D) >>> > > > > > > ACPI: WDDT 000000006f6f0000 00040 >>> (v01 >>> > INTEL >>> > > THRLY >>> > > > 00000000 >>> > > > > MSFT >>> > > > > > 0100000D) >>> > > > > > > ACPI: SSDT 000000006f5d9000 1FDDC >>> (v01 >>> > INTEL >>> > > SSDT PM >>> > > > 00004000 >>> > > > > INTL >>> > > > > > 20061109) >>> > > > > > > ACPI: 000000006f6ee000 001D0 >>> (v01 >>> > INTEL >>> > > THRLY >>> > > > 00000001 >>> > > > > MSFT >>> > > > > > 0100000D) >>> > > > > > > No NUMA configuration found >>> > > > > > > Faking a node at >>> > > 0000000000000000-0000000066c0a000 >>> > > > > > > Bootmem setup node 0 >>> > > 0000000000000000-0000000066c0a000 >>> > > > > > > NODE_DATA [0000000000008000 - >>> > 000000000001ffff] >>> > > > > > > bootmap [0000000000020000 - >>> > 000000000002cd87] >>> > > pages d >>> > > > > > > (9 early reservations) ==> bootmem >>> > [0000000000 - >>> > > > 0066c0a000] >>> > > > > > > #0 [0000000000 - 0000001000] >>> BIOS data >>> > page >>> > > ==> >>> > > > [0000000000 >>> > > > > - >>> > > > > > 0000001000] >>> > > > > > > #1 [0003046000 - 0003063000] >>> XEN >>> > PAGETABLES >>> > > ==> >>> > > > [0003046000 >>> > > > > - >>> > > > > > 0003063000] >>> > > > > > > #2 [0000006000 - 0000008000] >>> > TRAMPOLINE >>> > > ==> >>> > > > [0000006000 >>> > > > > - >>> > > > > > 0000008000] >>> > > > > > > #3 [0001000000 - 000269ae98] >>> TEXT >>> > DATA BSS >>> > > ==> >>> > > > [0001000000 >>> > > > > - >>> > > > > > 000269ae98] >>> > > > > > > #4 [00026bb000 - 0002d0d800] >>> > RAMDISK >>> > > ==> >>> > > > [00026bb000 >>> > > > > - >>> > > > > > 0002d0d800] >>> > > > > > > #5 [0002d0e000 - 0003046000] >>> XEN START >>> > INFO >>> > > ==> >>> > > > [0002d0e000 >>> > > > > - >>> > > > > > 0003046000] >>> > > > > > > #6 [000269b000 - 000269b011] >>> > BRK >>> > > ==> >>> > > > [000269b000 >>> > > > > - >>> > > > > > 000269b011] >>> > > > > > > #7 [0000100000 - 000041a000] >>> > PGTABLE >>> > > ==> >>> > > > [0000100000 >>> > > > > - >>> > > > > > 000041a000] >>> > > > > > > #8 [0000001000 - 0000001030] >>> ACPI >>> > SLIT >>> > > ==> >>> > > > [0000001000 >>> > > > > - >>> > > > > > 0000001030] >>> > > > > > > found SMP MP-table at >>> [ffff8800000fd750] >>> > fd750 >>> > > > > > > Zone PFN ranges: >>> > > > > > > DMA 0x00000000 -> 0x00001000 >>> > > > > > > DMA32 0x00001000 -> 0x00100000 >>> > > > > > > Normal 0x00100000 -> 0x00100000 >>> > > > > > > Movable zone start PFN for each >>> node >>> > > > > > > early_node_map[2] active PFN ranges >>> > > > > > > 0: 0x00000000 -> 0x0000009d >>> > > > > > > 0: 0x00000100 -> 0x00066c0a >>> > > > > > > ACPI: PM-Timer IO Port: 0x408 >>> > > > > > > ACPI: LAPIC (acpi_id[0x00] >>> lapic_id[0x00] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x01] >>> lapic_id[0x02] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x02] >>> lapic_id[0x04] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x03] >>> lapic_id[0x10] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x04] >>> lapic_id[0x12] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x05] >>> lapic_id[0x14] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x06] >>> lapic_id[0x01] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x07] >>> lapic_id[0x03] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x08] >>> lapic_id[0x05] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x09] >>> lapic_id[0x11] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x0a] >>> lapic_id[0x13] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x0b] >>> lapic_id[0x15] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x0c] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x0d] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x0e] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x0f] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x10] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x11] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x12] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x13] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x14] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x15] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x16] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x17] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x00] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x01] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x02] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x03] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x04] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x05] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x06] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x07] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x08] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x09] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x10] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x11] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x12] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x13] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x14] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x15] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x16] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x17] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: IOAPIC (id[0x08] >>> address[0xfec00000] >>> > > gsi_base[0]) >>> > > > > > > IOAPIC[0]: apic_id 8, version 0, >>> address >>> > > 0xfec00000, GSI >>> > > > 0-0 >>> > > > > > > ACPI: IOAPIC (id[0x09] >>> address[0xfec90000] >>> > > gsi_base[24]) >>> > > > > > > IOAPIC[1]: apic_id 9, version 0, >>> address >>> > > 0xfec90000, GSI >>> > > > 24-24 >>> > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 >>> > global_irq 2 >>> > > dfl dfl) >>> > > > > > > ERROR: Unable to locate IOAPIC for >>> GSI 2 >>> > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 >>> > global_irq 9 >>> > > high >>> > > > level) >>> > > > > > > ERROR: Unable to locate IOAPIC for >>> GSI 9 >>> > > > > > > Using ACPI (MADT) for SMP >>> configuration >>> > > information >>> > > > > > > ACPI: HPET id: 0x8086a401 base: >>> 0xfed00000 >>> > > > > > > SMP: Allowing 12 CPUs, 0 hotplug >>> CPUs >>> > > > > > > PM: Registered nosave memory: >>> > 000000000009d000 - >>> > > > > 0000000000100000 >>> > > > > > > Allocating PCI resources starting >>> at >>> > b0000000 >>> > > (gap: >>> > > > > b0000000:4c000000) >>> > > > > > > Booting paravirtualized kernel on >>> Xen >>> > > > > > > Xen version: 3.4.3-rc4-pre >>> (preserve-AD) >>> > (dom0) >>> > > > > > > NR_CPUS:512 nr_cpumask_bits:512 >>> > nr_cpu_ids:12 >>> > > > nr_node_ids:1 >>> > > > > > > PERCPU: Embedded 478 pages/cpu >>> > @ffff880005ebc000 >>> > > > s1928024 r8192 >>> > > > > d21672 >>> > > > > > u1957888 >>> > > > > > > pcpu-alloc: s1928024 r8192 d21672 >>> u1957888 >>> > > > alloc=478*4096 >>> > > > > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 >>> [0] 03 >>> > [0] 04 >>> > > [0] 05 >>> > > > [0] 06 >>> > > > > [0] 07 >>> > > > > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 >>> [0] 11 >>> > > > > > > Xen: using vcpu_info placement >>> > > > > > > Built 1 zonelists in Node order, >>> mobility >>> > > grouping on. >>> > > > Total >>> > > > > pages: >>> > > > > > 409291 >>> > > > > > > Policy zone: DMA32 >>> > > > > > > Kernel command line: ro >>> > > root=/dev/VolGroup01/LogVol00 >>> > > > > console=hvc0 >>> > > > > > earlyprintk=xen nomodeset >>> > > > > > > PID hash table entries: 4096 >>> (order: 3, >>> > 32768 >>> > > bytes) >>> > > > > > > Initializing CPU#0 >>> > > > > > > DMA: Placing 64MB software IO TLB >>> between >>> > > > ffff880007525000 - >>> > > > > > ffff88000b525000 >>> > > > > > > DMA: software IO TLB at phys >>> 0x7525000 - >>> > > 0xb525000 >>> > > > > > > xen_swiotlb_fixup: >>> buf=ffff880007525000 >>> > > size=67108864 >>> > > > > > > xen_swiotlb_fixup: >>> buf=ffff88000b585000 >>> > > size=32768 >>> > > > > > > Memory: 1514268k/1683496k available >>> (4654k >>> > kernel >>> > > code, >>> > > > 396k >>> > > > > absent, >>> > > > > > 168832k reserved, 3443k data, 3396k >>> init) >>> > > > > > > SLUB: Genslabs=14, HWalign=64, >>> Order=0-3, >>> > > MinObjects=0, >>> > > > > CPUs=12, >>> > > > > > Nodes=1 >>> > > > > > > Hierarchical RCU implementation. >>> > > > > > > NR_IRQS:4352 nr_irqs:3072 >>> > > > > > > Already setup the GSI :0 >>> > > > > > > Already setup the GSI :1 >>> > > > > > > Already setup the GSI :2 >>> > > > > > > Already setup the GSI :3 >>> > > > > > > Already setup the GSI :4 >>> > > > > > > Already setup the GSI :5 >>> > > > > > > Already setup the GSI :6 >>> > > > > > > Already setup the GSI :7 >>> > > > > > > Already setup the GSI :8 >>> > > > > > > Already setup the GSI :9 >>> > > > > > > Already setup the GSI :10 >>> > > > > > > Already setup the GSI :11 >>> > > > > > > Already setup the GSI :12 >>> > > > > > > Already setup the GSI :13 >>> > > > > > > Already setup the GSI :14 >>> > > > > > > Already setup the GSI :15 >>> > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 >>> > global_irq 2 >>> > > dfl dfl) >>> > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 >>> > global_irq 9 >>> > > high >>> > > > level) >>> > > > > > > xen: sci override: source_irq=9 >>> > global_irq=9 >>> > > trigger=c >>> > > > > polarity=1 >>> > > > > > > xen_allocate_pirq: returning irq 9 >>> for gsi >>> > 9 >>> > > > > > > Already setup the GSI :9 >>> > > > > > > xen: acpi sci 9 >>> > > > > > > Console: colour VGA+ 80x25 >>> > > > > > > console [hvc0] enabled, bootconsole >>> > disabled >>> > > console >>> > > > [hvc0] >>> > > > > enabled, >>> > > > > > bootconsole disabled >>> > > > > > > Lock dependency validator: >>> Copyright (c) >>> > 2006 Red >>> > > Hat, >>> > > > Inc., >>> > > > > Ingo >>> > > > > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 >>> ... >>> > > MAX_LOCK_DEPTH: >>> > > > > 48 >>> > > > > > ... MAX_LOCKDEP_KEYS: 8191 ... >>> > > CLASSHASH_SIZE: >>> > > > > 4096 ... >>> > > > > > MAX_LOCKDEP_ENTRIES: 16384 ... >>> > > MAX_LOCKDEP_CHAINS: >>> > > > 32768 >>> > > > > ... >>> > > > > > CHAINHASH_SIZE: 16384 >>> memory used >>> > by lock >>> > > > dependency >>> > > > > info: >>> > > > > > 6367 kB per task-struct memory >>> footprint: >>> > 2688 >>> > > bytes >>> > > > allocated >>> > > > > 17039360 >>> > > > > > bytes of page_cgroup please try >>> > > 'cgroup_disable=memory' >>> > > > option if >>> > > > > you >>> > > > > > don't want memory cgroups installing >>> Xen >>> > timer for >>> > > CPU 0 >>> > > > Detected >>> > > > > > 3200.206 MHz processor. Calibrating >>> delay >>> > loop >>> > > (skipped), >>> > > > value >>> > > > > > calculated using timer frequency.. >>> 6400.41 >>> > BogoMIPS >>> > > > (lpj=3200206) >>> > > > > > Security Framework initialized >>> SELinux: >>> > > Initializing. >>> > > > Dentry >>> > > > > cache hash >>> > > > > > table entries: 262144 (order: 9, >>> 2097152 >>> > bytes) >>> > > > Inode-cache hash >>> > > > > table >>> > > > > > entries: 131072 (order: 8, 1048576 >>> bytes) >>> > > Mount-cache hash >>> > > > table >>> > > > > > entries: 256 Initializing cgroup >>> subsys ns >>> > > Initializing >>> > > > cgroup >>> > > > > subsys >>> > > > > > cpuacct Initializing cgroup subsys >>> memory >>> > > Initializing >>> > > > cgroup >>> > > > > subsys >>> > > > > > devices Initializing cgroup subsys >>> freezer >>> > > Initializing >>> > > > cgroup >>> > > > > subsys >>> > > > > > net_cls CPU: L1 I cache: 32K, L1 D >>> cache: >>> > 32K CPU: >>> > > L2 >>> > > > cache: 256K >>> > > > > CPU: >>> > > > > > L3 cache: 12288K CPU 0/0x0 -> Node 0 >>> CPU: >>> > > Unsupported >>> > > > number of >>> > > > > siblings >>> > > > > > 32 Performance Events: unsupported p6 >>> CPU >>> > model 44 >>> > > no PMU >>> > > > driver, >>> > > > > > software events only. lockdep: fixing >>> up >>> > > alternatives. SMP >>> > > > > alternatives: >>> > > > > > switching to UP code ACPI: Core >>> revision >>> > 20090903 >>> > > ftrace: >>> > > > > converting >>> > > > > > mcount calls to 0f 1f 44 00 00 >>> ftrace: >>> > allocating >>> > > 27971 >>> > > > entries >>> > > > > in 110 >>> > > > > > pages installing Xen timer for CPU 1 >>> > lockdep: >>> > > fixing up >>> > > > > alternatives. >>> > > > > > SMP alternatives: switching to SMP >>> code >>> > > Initializing CPU#1 >>> > > > CPU: >>> > > > > L1 I >>> > > > > > cache: 32K, L1 D cache: 32K CPU: L2 >>> cache: >>> > 256K >>> > > CPU: L3 >>> > > > cache: >>> > > > > 12288K >>> > > > > > CPU 1/0x0 -> Node 0 CPU: Unsupported >>> number >>> > of >>> > > siblings 32 >>> > > > > installing >>> > > > > > Xen timer for CPU 2 Initializing >>> CPU#2 CPU: >>> > L1 I >>> > > cache: >>> > > > 32K, L1 D >>> > > > > cache: >>> > > > > > 32K CPU: L2 cache: 256K CPU: L3 >>> cache: >>> > 12288K CPU >>> > > 2/0x0 -> >>> > > > Node 0 >>> > > > > CPU: >>> > > > > > Unsupported number of siblings 32 >>> installing >>> > Xen >>> > > timer for >>> > > > CPU 3 >>> > > > > > Initializing CPU#3 CPU: L1 I cache: >>> 32K, L1 >>> > D >>> > > cache: 32K >>> > > > CPU: L2 >>> > > > > cache: >>> > > > > > 256K CPU: L3 cache: 12288K CPU 3/0x0 >>> -> Node >>> > 0 CPU: >>> > > > Unsupported >>> > > > > number >>> > > > > > of siblings 32 installing Xen timer >>> for CPU >>> > 4 >>> > > Initializing >>> > > > CPU#4 >>> > > > > CPU: L1 >>> > > > > > I cache: 32K, L1 D cache: 32K CPU: L2 >>> cache: >>> > 256K >>> > > CPU: L3 >>> > > > cache: >>> > > > > 12288K >>> > > > > > CPU 4/0x0 -> Node 0 CPU: Unsupported >>> number >>> > of >>> > > siblings 32 >>> > > > > installing >>> > > > > > Xen timer for CPU 5 Initializing >>> CPU#5 CPU: >>> > L1 I >>> > > cache: >>> > > > 32K, L1 D >>> > > > > cache: >>> > > > > > 32K CPU: L2 cache: 256K CPU: L3 >>> cache: >>> > 12288K CPU >>> > > 5/0x0 -> >>> > > > Node 0 >>> > > > > CPU: >>> > > > > > Unsupported number of siblings 32 >>> installing >>> > Xen >>> > > timer for >>> > > > CPU 6 >>> > > > > > Initializing CPU#6 CPU: L1 I cache: >>> 32K, L1 >>> > D >>> > > cache: 32K >>> > > > CPU: L2 >>> > > > > cache: >>> > > > > > 256K CPU: L3 cache: 12288K CPU 6/0x0 >>> -> Node >>> > 0 CPU: >>> > > > Unsupported >>> > > > > number >>> > > > > > of siblings 32 installing Xen timer >>> for CPU >>> > 7 >>> > > Initializing >>> > > > CPU#7 >>> > > > > CPU: L1 >>> > > > > > I cache: 32K, L1 D cache: 32K CPU: L2 >>> cache: >>> > 256K >>> > > CPU: L3 >>> > > > cache: >>> > > > > 12288K >>> > > > > > CPU 7/0x0 -> Node 0 CPU: Unsupported >>> number >>> > of >>> > > siblings 32 >>> > > > > installing >>> > > > > > Xen timer for CPU 8 Initializing >>> CPU#8 CPU: >>> > L1 I >>> > > cache: >>> > > > 32K, L1 D >>> > > > > cache: >>> > > > > > 32K CPU: L2 cache: 256K CPU: L3 >>> cache: >>> > 12288K CPU >>> > > 8/0x0 -> >>> > > > Node 0 >>> > > > > CPU: >>> > > > > > Unsupported number of siblings 32 >>> installing >>> > Xen >>> > > timer for >>> > > > CPU 9 >>> > > > > > Initializing CPU#9 CPU: L1 I cache: >>> 32K, L1 >>> > D >>> > > cache: 32K >>> > > > CPU: L2 >>> > > > > cache: >>> > > > > > 256K CPU: L3 cache: 12288K CPU 9/0x0 >>> -> Node >>> > 0 CPU: >>> > > > Unsupported >>> > > > > number >>> > > > > > of siblings 32 installing Xen timer >>> for CPU >>> > 10 >>> > > > Initializing >>> > > > > CPU#10 CPU: >>> > > > > > L1 I cache: 32K, L1 D cache: 32K CPU: >>> L2 >>> > cache: >>> > > 256K CPU: >>> > > > L3 >>> > > > > cache: >>> > > > > > 12288K CPU 10/0x0 -> Node 0 CPU: >>> Unsupported >>> > number >>> > > of >>> > > > siblings >>> > > > > 32 >>> > > > > > installing Xen timer for CPU 11 >>> Initializing >>> > CPU#11 >>> > > CPU: >>> > > > L1 I >>> > > > > cache: >>> > > > > > 32K, L1 D cache: 32K CPU: L2 cache: >>> 256K >>> > CPU: L3 >>> > > cache: >>> > > > 12288K >>> > > > > CPU >>> > > > > > 11/0x0 -> Node 0 CPU: Unsupported >>> number of >>> > > siblings 32 >>> > > > Brought >>> > > > > up 12 >>> > > > > > CPUs Grant table initialized >>> regulator: core >>> > > version 0.5 >>> > > > Time: >>> > > > > 14:45:00 >>> > > > > > Date: 03/16/10 NET: Registered >>> protocol >>> > family 16 >>> > > > > xenbus_probe_init ok >>> > > > > > ACPI FADT declares the system doesn't >>> > support PCIe >>> > > ASPM, >>> > > > so >>> > > > > disable it >>> > > > > > ACPI: bus type pci registered PCI: >>> MCFG >>> > > configuration 0: >>> > > > base >>> > > > > a0000000 >>> > > > > > segment 0 buses 0 - 255 PCI: MCFG >>> area at >>> > a0000000 >>> > > > reserved in >>> > > > > E820 PCI: >>> > > > > > Using MMCONFIG at a0000000 - afffffff >>> PCI: >>> > Using >>> > > > configuration >>> > > > > type 1 >>> > > > > > for base access bio: create slab >>> <bio-0> at >>> > 0 ACPI >>> > > Error: >>> > > > Field >>> > > > > [CPB3] >>> > > > > > at 96 exceeds Buffer [NULL] size 64 >>> (bits) >>> > > > > (20090903/dsopcode-596) ACPI >>> > > > > > Error (psparse-0537): Method >>> parse/execution >>> > failed >>> > > > [\_SB_._OSC] >>> > > > > (Node >>> > > > > > ffff880064e00c98), >>> AE_AML_BUFFER_LIMIT ACPI: >>> > > Interpreter >>> > > > enabled >>> > > > > ACPI: >>> > > > > > (supports S0 S1 S3 S4 S5) ACPI: Using >>> IOAPIC >>> > for >>> > > interrupt >>> > > > > routing ACPI >>> > > > > > Warning: Incorrect checksum in table >>> [ ] >>> > - 97, >>> > > should >>> > > > be DB >>> > > > > > (20090903/tbutils-314) ACPI: No dock >>> devices >>> > found. >>> > > ACPI: >>> > > > PCI >>> > > > > Root >>> > > > > > Bridge [PCI0] (0000:00) pci >>> 0000:00:01.0: >>> > PME# >>> > > supported >>> > > > from D0 >>> > > > > D3hot >>> > > > > > D3cold pci 0000:00:01.0: PME# >>> disabled pci >>> > > 0000:00:02.0: >>> > > > PME# >>> > > > > supported >>> > > > > > from D0 D3hot D3cold pci >>> 0000:00:02.0: PME# >>> > > disabled pci >>> > > > > 0000:00:03.0: >>> > > > > > PME# supported from D0 D3hot D3cold >>> pci >>> > > 0000:00:03.0: PME# >>> > > > > disabled pci >>> > > > > > 0000:00:04.0: PME# supported from D0 >>> D3hot >>> > D3cold >>> > > pci >>> > > > > 0000:00:04.0: PME# >>> > > > > > disabled pci 0000:00:05.0: PME# >>> supported >>> > from D0 >>> > > D3hot >>> > > > D3cold >>> > > > > pci >>> > > > > > 0000:00:05.0: PME# disabled pci >>> > 0000:00:06.0: PME# >>> > > > supported from >>> > > > > D0 >>> > > > > > D3hot D3cold pci 0000:00:06.0: PME# >>> disabled >>> > pci >>> > > > 0000:00:07.0: >>> > > > > PME# >>> > > > > > supported from D0 D3hot D3cold pci >>> > 0000:00:07.0: >>> > > PME# >>> > > > disabled >>> > > > > pci >>> > > > > > 0000:00:08.0: PME# supported from D0 >>> D3hot >>> > D3cold >>> > > pci >>> > > > > 0000:00:08.0: PME# >>> > > > > > disabled pci 0000:00:09.0: PME# >>> supported >>> > from D0 >>> > > D3hot >>> > > > D3cold >>> > > > > pci >>> > > > > > 0000:00:09.0: PME# disabled pci >>> > 0000:00:0a.0: PME# >>> > > > supported from >>> > > > > D0 >>> > > > > > D3hot D3cold pci 0000:00:0a.0: PME# >>> disabled >>> > pci >>> > > > 0000:00:13.0: >>> > > > > PME# >>> > > > > > supported from D0 D3hot D3cold pci >>> > 0000:00:13.0: >>> > > PME# >>> > > > disabled >>> > > > > pci >>> > > > > > 0000:00:1a.7: PME# supported from D0 >>> D3hot >>> > D3cold >>> > > pci >>> > > > > 0000:00:1a.7: PME# >>> > > > > > disabled pci 0000:00:1c.0: PME# >>> supported >>> > from D0 >>> > > D3hot >>> > > > D3cold >>> > > > > pci >>> > > > > > 0000:00:1c.0: PME# disabled pci >>> > 0000:00:1c.4: PME# >>> > > > supported from >>> > > > > D0 >>> > > > > > D3hot D3cold pci 0000:00:1c.4: PME# >>> disabled >>> > pci >>> > > > 0000:00:1c.5: >>> > > > > PME# >>> > > > > > supported from D0 D3hot D3cold pci >>> > 0000:00:1c.5: >>> > > PME# >>> > > > disabled >>> > > > > pci >>> > > > > > 0000:00:1d.7: PME# supported from D0 >>> D3hot >>> > D3cold >>> > > pci >>> > > > > 0000:00:1d.7: PME# >>> > > > > > disabled pci 0000:00:1f.0: quirk: >>> region >>> > 0400-047f >>> > > claimed >>> > > > by >>> > > > > ICH6 >>> > > > > > ACPI/GPIO/TCO pci 0000:00:1f.0: >>> quirk: >>> > region >>> > > 0500-053f >>> > > > claimed >>> > > > > by ICH6 >>> > > > > > GPIO pci 0000:00:1f.0: ICH7 LPC >>> Generic IO >>> > decode 1 >>> > > PIO at >>> > > > 0680 >>> > > > > (mask >>> > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC >>> Generic IO >>> > decode >>> > > 2 PIO >>> > > > at 0ca0 >>> > > > > (mask >>> > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC >>> Generic IO >>> > decode >>> > > 3 PIO >>> > > > at 0600 >>> > > > > (mask >>> > > > > > 001f) pci 0000:00:1f.2: PME# >>> supported from >>> > D3hot >>> > > pci >>> > > > > 0000:00:1f.2: PME# >>> > > > > > disabled pci 0000:01:00.0: PME# >>> supported >>> > from D0 >>> > > D3hot >>> > > > D3cold >>> > > > > pci >>> > > > > > 0000:01:00.0: PME# disabled pci >>> > 0000:01:00.1: PME# >>> > > > supported from >>> > > > > D0 >>> > > > > > D3hot D3cold pci 0000:01:00.1: PME# >>> disabled >>> > pci >>> > > > 0000:0c:00.0: >>> > > > > disabling >>> > > > > > ASPM on pre-1.1 PCIe device. You can >>> enable >>> > it >>> > > with >>> > > > > 'pcie_aspm=force' >>> > > > > > pci 0000:00:1e.0: transparent bridge >>> ACPI: >>> > PCI Root >>> > > Bridge >>> > > > [PCI1] >>> > > > > > (0000:fe) ACPI: PCI Root Bridge >>> [PCI2] >>> > (0000:ff) >>> > > ACPI: PCI >>> > > > > Interrupt >>> > > > > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 >>> 12 14 >>> > 15) >>> > > ACPI: PCI >>> > > > > Interrupt Link >>> > > > > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 >>> 15) >>> > ACPI: PCI >>> > > > Interrupt >>> > > > > Link >>> > > > > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 >>> 15) >>> > ACPI: PCI >>> > > > Interrupt >>> > > > > Link >>> > > > > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 >>> 15) >>> > ACPI: PCI >>> > > > Interrupt >>> > > > > Link >>> > > > > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 >>> 15) *0, >>> > > disabled. >>> > > > ACPI: PCI >>> > > > > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 >>> 9 10 >>> > *11 12 >>> > > 14 15) >>> > > > ACPI: >>> > > > > PCI >>> > > > > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 >>> 9 10 >>> > 11 12 14 >>> > > 15) >>> > > > *0, >>> > > > > disabled. >>> > > > > > ACPI: PCI Interrupt Link [LNKH] (IRQs >>> 3 4 5 >>> > 6 7 9 >>> > > *10 11 >>> > > > 12 14 >>> > > > > 15) >>> > > > > > xenbus_probe_backend_init bus >>> registered ok >>> > > > > xenbus_probe_frontend_init >>> > > > > > bus registered ok xen_balloon: >>> Initialising >>> > balloon >>> > > driver >>> > > > with >>> > > > > page >>> > > > > > order 0. vgaarb: device added: >>> > > > > > >>> > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none >>> > > > vgaarb: >>> > > > > loaded >>> > > > > > SCSI subsystem initialized usbcore: >>> > registered new >>> > > > interface >>> > > > > driver >>> > > > > > usbfs usbcore: registered new >>> interface >>> > driver hub >>> > > > usbcore: >>> > > > > registered >>> > > > > > new device driver usb PCI: Using ACPI >>> for >>> > IRQ >>> > > routing >>> > > > NetLabel: >>> > > > > > Initializing NetLabel: domain hash >>> size = >>> > 128 >>> > > NetLabel: >>> > > > > protocols = >>> > > > > > UNLABELED CIPSOv4 NetLabel: >>> unlabeled >>> > traffic >>> > > allowed by >>> > > > default >>> > > > > > Switching to clocksource xen kstop/0 >>> used >>> > greatest >>> > > stack >>> > > > depth: >>> > > > > 6568 >>> > > > > > bytes left kstop/1 used greatest >>> stack >>> > depth: 6536 >>> > > bytes >>> > > > left >>> > > > > pnp: PnP >>> > > > > > ACPI init ACPI: bus type pnp >>> registered >>> > > xen_allocate_pirq: >>> > > > > returning irq >>> > > > > > 8 for gsi 8 Already setup the GSI :8 >>> > > xen_allocate_pirq: >>> > > > returning >>> > > > > irq 13 >>> > > > > > for gsi 13 Already setup the GSI :13 >>> pnp: >>> > PnP ACPI: >>> > > found >>> > > > 13 >>> > > > > devices >>> > > > > > ACPI: ACPI bus type pnp unregistered >>> system >>> > 00:07: >>> > > ioport >>> > > > range >>> > > > > > 0x500-0x53f has been reserved system >>> 00:07: >>> > ioport >>> > > range >>> > > > > 0x400-0x47f has >>> > > > > > been reserved system 00:07: ioport >>> range >>> > > 0x800-0x81f has >>> > > > been >>> > > > > reserved >>> > > > > > system 00:07: ioport range >>> 0x2f8-0x2ff has >>> > been >>> > > reserved >>> > > > system >>> > > > > 00:07: >>> > > > > > iomem range 0xfed1c000-0xfed8bffe >>> could not >>> > be >>> > > reserved >>> > > > system >>> > > > > 00:07: >>> > > > > > iomem range 0xff000000-0xffffffff >>> could not >>> > be >>> > > reserved >>> > > > system >>> > > > > 00:07: >>> > > > > > iomem range 0xfee00000-0xfeefffff has >>> been >>> > reserved >>> > > system >>> > > > 00:07: >>> > > > > iomem >>> > > > > > range 0xfe900000-0xfe90001f has been >>> > reserved >>> > > system >>> > > > 00:07: iomem >>> > > > > range >>> > > > > > 0xfea00000-0xfea0001f has been >>> reserved >>> > system >>> > > 00:07: >>> > > > iomem range >>> > > > > > 0xfed1b000-0xfed1bfff has been >>> reserved pci >>> > > 0000:0c:00.0: >>> > > > BAR 6: >>> > > > > no >>> > > > > > parent found for of device >>> > [0xffff0000-0xffffffff] >>> > > pci >>> > > > > 0000:00:01.0: PCI >>> > > > > > bridge, secondary bus 0000:01 pci >>> > 0000:00:01.0: >>> > > IO >>> > > > window: >>> > > > > > 0x1000-0x1fff pci 0000:00:01.0: MEM >>> > window: >>> > > > > 0xb1900000-0xb19fffff pci >>> > > > > > 0000:00:01.0: PREFETCH window: >>> disabled >>> > pci >>> > > > 0000:00:02.0: PCI >>> > > > > bridge, >>> > > > > > secondary bus 0000:02 pci >>> 0000:00:02.0: IO >>> > > window: >>> > > > disabled pci >>> > > > > > 0000:00:02.0: MEM window: disabled >>> pci >>> > > 0000:00:02.0: >>> > > > PREFETCH >>> > > > > > window: disabled pci 0000:00:03.0: >>> PCI >>> > bridge, >>> > > secondary >>> > > > bus >>> > > > > 0000:03 pci >>> > > > > > 0000:00:03.0: IO window: disabled >>> pci >>> > > 0000:00:03.0: >>> > > > MEM >>> > > > > window: >>> > > > > > disabled pci 0000:00:03.0: PREFETCH >>> > window: >>> > > disabled pci >>> > > > > 0000:00:04.0: >>> > > > > > PCI bridge, secondary bus 0000:04 pci >>> > 0000:00:04.0: >>> > > IO >>> > > > window: >>> > > > > > disabled pci 0000:00:04.0: MEM >>> window: >>> > disabled >>> > > pci >>> > > > > 0000:00:04.0: >>> > > > > > PREFETCH window: disabled pci >>> 0000:00:05.0: >>> > PCI >>> > > bridge, >>> > > > secondary >>> > > > > bus >>> > > > > > 0000:05 pci 0000:00:05.0: IO >>> window: >>> > disabled pci >>> > > > 0000:00:05.0: >>> > > > > MEM >>> > > > > > window: disabled pci 0000:00:05.0: >>> > PREFETCH >>> > > window: >>> > > > disabled >>> > > > > pci >>> > > > > > 0000:00:06.0: PCI bridge, secondary >>> bus >>> > 0000:06 pci >>> > > > 0000:00:06.0: >>> > > > > IO >>> > > > > > window: disabled pci 0000:00:06.0: >>> MEM >>> > window: >>> > > disabled >>> > > > pci >>> > > > > > 0000:00:06.0: PREFETCH window: >>> disabled >>> > pci >>> > > > 0000:00:07.0: PCI >>> > > > > bridge, >>> > > > > > secondary bus 0000:07 pci >>> 0000:00:07.0: IO >>> > > window: >>> > > > disabled pci >>> > > > > > 0000:00:07.0: MEM window: disabled >>> pci >>> > > 0000:00:07.0: >>> > > > PREFETCH >>> > > > > > window: disabled pci 0000:00:08.0: >>> PCI >>> > bridge, >>> > > secondary >>> > > > bus >>> > > > > 0000:08 pci >>> > > > > > 0000:00:08.0: IO window: disabled >>> pci >>> > > 0000:00:08.0: >>> > > > MEM >>> > > > > window: >>> > > > > > disabled pci 0000:00:08.0: PREFETCH >>> > window: >>> > > disabled pci >>> > > > > 0000:00:09.0: >>> > > > > > PCI bridge, secondary bus 0000:09 pci >>> > 0000:00:09.0: >>> > > IO >>> > > > window: >>> > > > > > 0x3000-0x3fff pci 0000:00:09.0: MEM >>> > window: >>> > > > > 0xb1b00000-0xb1cfffff pci >>> > > > > > 0000:00:09.0: PREFETCH window: >>> > > > > 0x000000b1d00000-0x000000b1efffff pci >>> > > > > > 0000:00:0a.0: PCI bridge, secondary >>> bus >>> > 0000:0a pci >>> > > > 0000:00:0a.0: >>> > > > > IO >>> > > > > > window: disabled pci 0000:00:0a.0: >>> MEM >>> > window: >>> > > disabled >>> > > > pci >>> > > > > > 0000:00:0a.0: PREFETCH window: >>> disabled >>> > pci >>> > > > 0000:00:1c.0: PCI >>> > > > > bridge, >>> > > > > > secondary bus 0000:0b pci >>> 0000:00:1c.0: IO >>> > > window: >>> > > > disabled pci >>> > > > > > 0000:00:1c.0: MEM window: disabled >>> pci >>> > > 0000:00:1c.0: >>> > > > PREFETCH >>> > > > > > window: disabled pci 0000:00:1c.4: >>> PCI >>> > bridge, >>> > > secondary >>> > > > bus >>> > > > > 0000:0c pci >>> > > > > > 0000:00:1c.4: IO window: disabled >>> pci >>> > > 0000:00:1c.4: >>> > > > MEM >>> > > > > window: >>> > > > > > 0xb1000000-0xb18fffff pci >>> 0000:00:1c.4: >>> > PREFETCH >>> > > window: >>> > > > > > 0x000000b0000000-0x000000b0ffffff pci >>> > 0000:00:1c.5: >>> > > PCI >>> > > > bridge, >>> > > > > > secondary bus 0000:0d pci >>> 0000:00:1c.5: IO >>> > > window: >>> > > > disabled pci >>> > > > > > 0000:00:1c.5: MEM window: disabled >>> pci >>> > > 0000:00:1c.5: >>> > > > PREFETCH >>> > > > > > window: disabled pci 0000:00:1e.0: >>> PCI >>> > bridge, >>> > > secondary >>> > > > bus >>> > > > > 0000:0e pci >>> > > > > > 0000:00:1e.0: IO window: disabled >>> pci >>> > > 0000:00:1e.0: >>> > > > MEM >>> > > > > window: >>> > > > > > disabled pci 0000:00:1e.0: PREFETCH >>> > window: >>> > > disabled pci >>> > > > > 0000:00:01.0: >>> > > > > > PCI INT A -> GSI 28 (level, low) -> >>> IRQ 28 >>> > pci >>> > > > 0000:00:02.0: PCI >>> > > > > INT A >>> > > > > > -> GSI 29 (level, low) -> IRQ 29 pci >>> > 0000:00:03.0: >>> > > PCI INT >>> > > > A -> >>> > > > > GSI 24 >>> > > > > > (level, low) -> IRQ 24 pci >>> 0000:00:04.0: PCI >>> > INT A >>> > > -> GSI >>> > > > 25 >>> > > > > (level, >>> > > > > > low) -> IRQ 25 pci 0000:00:05.0: PCI >>> INT A >>> > -> GSI >>> > > 26 >>> > > > (level, low) >>> > > > > -> IRQ >>> > > > > > 26 pci 0000:00:06.0: PCI INT A -> GSI >>> 27 >>> > (level, >>> > > low) -> >>> > > > IRQ 27 >>> > > > > pci >>> > > > > > 0000:00:07.0: PCI INT A -> GSI 30 >>> (level, >>> > low) -> >>> > > IRQ 30 >>> > > > pci >>> > > > > > 0000:00:08.0: PCI INT A -> GSI 31 >>> (level, >>> > low) -> >>> > > IRQ 31 >>> > > > pci >>> > > > > > 0000:00:09.0: PCI INT A -> GSI 32 >>> (level, >>> > low) -> >>> > > IRQ 32 >>> > > > pci >>> > > > > > 0000:00:0a.0: PCI INT A -> GSI 33 >>> (level, >>> > low) -> >>> > > IRQ 33 >>> > > > pci >>> > > > > > 0000:00:1c.0: PCI INT A -> GSI 16 >>> (level, >>> > low) -> >>> > > IRQ 16 >>> > > > > > xen_allocate_pirq: returning irq 16 >>> for gsi >>> > 16 >>> > > Already >>> > > > setup the >>> > > > > GSI :16 >>> > > > > > pci 0000:00:1c.4: PCI INT A -> GSI 16 >>> > (level, low) >>> > > -> IRQ >>> > > > 16 pci >>> > > > > > 0000:00:1c.5: PCI INT B -> GSI 17 >>> (level, >>> > low) -> >>> > > IRQ 17 >>> > > > NET: >>> > > > > Registered >>> > > > > > protocol family 2 IP route cache hash >>> table >>> > > entries: 65536 >>> > > > > (order: 7, >>> > > > > > 524288 bytes) TCP established hash >>> table >>> > entries: >>> > > 262144 >>> > > > (order: >>> > > > > 10, >>> > > > > > 4194304 bytes) TCP bind hash table >>> entries: >>> > 65536 >>> > > (order: >>> > > > 10, >>> > > > > 4718592 >>> > > > > > bytes) TCP: Hash tables configured >>> > (established >>> > > 262144 >>> > > > bind >>> > > > > 65536) TCP >>> > > > > > reno registered NET: Registered >>> protocol >>> > family 1 >>> > > pci >>> > > > > 0000:01:00.0: >>> > > > > > Disabling L0s pci 0000:01:00.1: >>> Disabling >>> > L0s >>> > > Trying to >>> > > > unpack >>> > > > > rootfs >>> > > > > > image as initramfs... Freeing initrd >>> memory: >>> > 6474k >>> > > freed >>> > > > DMA-API: >>> > > > > > preallocated 32768 debug entries >>> DMA-API: >>> > debugging >>> > > > enabled by >>> > > > > kernel >>> > > > > > config PCI-DMA: Using software bounce >>> > buffering for >>> > > IO >>> > > > (SWIOTLB) >>> > > > > DMA: >>> > > > > > Placing 64MB software IO TLB between >>> > > ffff880007525000 - >>> > > > > ffff88000b525000 >>> > > > > > DMA: software IO TLB at phys >>> 0x7525000 - >>> > 0xb525000 >>> > > audit: >>> > > > > initializing >>> > > > > > netlink socket (disabled) type=2000 >>> > > > audit(1268750702.035:1): >>> > > > > initialized >>> > > > > > HugeTLB registered 2 MB page size, >>> > pre-allocated 0 >>> > > pages >>> > > > VFS: >>> > > > > Disk >>> > > > > > quotas dquot_6.5.2 Dquot-cache hash >>> table >>> > entries: >>> > > 512 >>> > > > (order 0, >>> > > > > 4096 >>> > > > > > bytes) msgmni has been set to 2970 >>> > cryptomgr_test >>> > > used >>> > > > greatest >>> > > > > stack >>> > > > > > depth: 5864 bytes left cryptomgr_test >>> used >>> > greatest >>> > > stack >>> > > > depth: >>> > > > > 5816 >>> > > > > > bytes left alg: No test for stdrng >>> (krng) >>> > Block >>> > > layer SCSI >>> > > > > generic (bsg) >>> > > > > > driver version 0.4 loaded (major 252) >>> io >>> > scheduler >>> > > noop >>> > > > > registered io >>> > > > > > scheduler anticipatory registered io >>> > scheduler >>> > > deadline >>> > > > > registered io >>> > > > > > scheduler cfq registered (default) >>> > pci_hotplug: PCI >>> > > Hot >>> > > > Plug PCI >>> > > > > Core >>> > > > > > version: 0.5 pciehp >>> 0000:00:09.0:pcie04: HPC >>> > > vendor_id >>> > > > 8086 >>> > > > > device_id >>> > > > > > 3410 ss_vid 0 ss_did 0 pciehp: PCI >>> Express >>> > Hot Plug >>> > > > Controller >>> > > > > Driver >>> > > > > > version: 0.4 acpiphp: ACPI Hot Plug >>> PCI >>> > Controller >>> > > Driver >>> > > > > version: 0.5 >>> > > > > > acpiphp_glue: Slot 2 already >>> registered by >>> > another >>> > > hotplug >>> > > > driver >>> > > > > > acpiphp_glue: Slot 2 already >>> registered by >>> > another >>> > > hotplug >>> > > > driver >>> > > > > > acpiphp_glue: Slot 2 already >>> registered by >>> > another >>> > > hotplug >>> > > > driver >>> > > > > > acpiphp_glue: Slot 2 already >>> registered by >>> > another >>> > > hotplug >>> > > > driver >>> > > > > > acpiphp_glue: Slot 2 already >>> registered by >>> > another >>> > > hotplug >>> > > > driver >>> > > > > > acpiphp_glue: Slot 2 already >>> registered by >>> > another >>> > > hotplug >>> > > > driver >>> > > > > > acpiphp_glue: Slot 2 already >>> registered by >>> > another >>> > > hotplug >>> > > > driver >>> > > > > > acpiphp_glue: Slot 2 already >>> registered by >>> > another >>> > > hotplug >>> > > > driver >>> > > > > > pci-stub: invalid id string "" input: >>> Sleep >>> > Button >>> > > as >>> > > > > > >>> > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 >>> > > > ACPI: >>> > > > > Sleep >>> > > > > > Button [SLPB] input: Power Button as >>> > > > > > >>> > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: >>> > > Power >>> > > > Button >>> > > > > [PWRF] >>> > > > > > registering netback hpet_acpi_add: no >>> > address or >>> > > irqs in >>> > > > _CRS >>> > > > > > Non-volatile memory driver v1.3 Linux >>> > agpgart >>> > > interface >>> > > > v0.103 >>> > > > > Serial: >>> > > > > > 8250/16550 driver, 4 ports, IRQ >>> sharing >>> > enabled >>> > > > serial8250: ttyS1 >>> > > > > at I/O >>> > > > > > 0x2f8 (irq = 3) is a 16550A brd: >>> module >>> > loaded >>> > > loop: >>> > > > module >>> > > > > loaded >>> > > > > > input: Macintosh mouse button >>> emulation as >>> > > > > /devices/virtual/input/input2 >>> > > > > > ahci 0000:00:1f.2: PCI INT A -> GSI >>> 19 >>> > (level, low) >>> > > -> IRQ >>> > > > 19 >>> > > > > ahci >>> > > > > > 0000:00:1f.2: AHCI 0001.0200 32 slots >>> 6 >>> > ports 3 >>> > > Gbps 0x3f >>> > > > impl >>> > > > > SATA mode >>> > > > > > ahci 0000:00:1f.2: flags: 64bit ncq >>> sntf pm >>> > led clo >>> > > pio >>> > > > slum part >>> > > > > ccc >>> > > > > > ems scsi0 : ahci scsi1 : ahci scsi2 >>> : ahci >>> > scsi3 : >>> > > ahci >>> > > > scsi4 : >>> > > > > ahci >>> > > > > > scsi5 : ahci ata1: SATA max UDMA/133 >>> > irq_stat >>> > > 0x00400040, >>> > > > > connection >>> > > > > > status changed irq 2996 ata2: SATA >>> max >>> > UDMA/133 >>> > > abar >>> > > > > m2048@0xb1a00000 >>> > > > > > port 0xb1a00180 irq 2996 ata3: SATA >>> max >>> > UDMA/133 >>> > > abar >>> > > > > m2048@0xb1a00000 >>> > > > > > port 0xb1a00200 irq 2996 ata4: SATA >>> max >>> > UDMA/133 >>> > > abar >>> > > > > m2048@0xb1a00000 >>> > > > > > port 0xb1a00280 irq 2996 ata5: SATA >>> max >>> > UDMA/133 >>> > > abar >>> > > > > m2048@0xb1a00000 >>> > > > > > port 0xb1a00300 irq 2996 ata6: SATA >>> max >>> > UDMA/133 >>> > > abar >>> > > > > m2048@0xb1a00000 >>> > > > > > port 0xb1a00380 irq 2996 Fixed MDIO >>> Bus: >>> > probed >>> > > ehci_hcd: >>> > > > USB 2.0 >>> > > > > > 'Enhanced' Host Controller (EHCI) >>> Driver >>> > ehci_hcd >>> > > > 0000:00:1a.7: >>> > > > > PCI INT >>> > > > > > C -> GSI 18 (level, low) -> IRQ 18 >>> ehci_hcd >>> > > 0000:00:1a.7: >>> > > > EHCI >>> > > > > Host >>> > > > > > Controller ehci_hcd 0000:00:1a.7: new >>> USB >>> > bus >>> > > registered, >>> > > > > assigned bus >>> > > > > > number 1 ehci_hcd 0000:00:1a.7: debug >>> port 1 >>> > > ehci_hcd >>> > > > > 0000:00:1a.7: irq >>> > > > > > 18, io mem 0xb1a02000 ehci_hcd >>> 0000:00:1a.7: >>> > USB >>> > > 2.0 >>> > > > started, >>> > > > > EHCI 1.00 >>> > > > > > usb usb1: New USB device found, >>> > idVendor=1d6b, >>> > > > idProduct=0002 usb >>> > > > > usb1: >>> > > > > > New USB device strings: Mfr=3, >>> Product=2, >>> > > SerialNumber=1 >>> > > > usb >>> > > > > usb1: >>> > > > > > Product: EHCI Host Controller usb >>> usb1: >>> > > Manufacturer: >>> > > > Linux >>> > > > > 2.6.32.9 >>> > > > > > ehci_hcd usb usb1: SerialNumber: >>> > 0000:00:1a.7 usb >>> > > usb1: >>> > > > > configuration #1 >>> > > > > > chosen from 1 choice hub 1-0:1.0: USB >>> hub >>> > found hub >>> > > > 1-0:1.0: 6 >>> > > > > ports >>> > > > > > detected ehci_hcd 0000:00:1d.7: PCI >>> INT A -> >>> > GSI 23 >>> > > > (level, low) >>> > > > > -> IRQ >>> > > > > > 23 ehci_hcd 0000:00:1d.7: EHCI Host >>> > Controller >>> > > ehci_hcd >>> > > > > 0000:00:1d.7: >>> > > > > > new USB bus registered, assigned bus >>> number >>> > 2 >>> > > ehci_hcd >>> > > > > 0000:00:1d.7: >>> > > > > > debug port 1 ehci_hcd 0000:00:1d.7: >>> irq 23, >>> > io mem >>> > > > 0xb1a01000 >>> > > > > ehci_hcd >>> > > > > > 0000:00:1d.7: USB 2.0 started, EHCI >>> 1.00 usb >>> > usb2: >>> > > New USB >>> > > > device >>> > > > > found, >>> > > > > > idVendor=1d6b, idProduct=0002 usb >>> usb2: New >>> > USB >>> > > device >>> > > > strings: >>> > > > > Mfr=3, >>> > > > > > Product=2, SerialNumber=1 usb usb2: >>> Product: >>> > EHCI >>> > > Host >>> > > > Controller >>> > > > > usb >>> > > > > > usb2: Manufacturer: Linux 2.6.32.9 >>> ehci_hcd >>> > usb >>> > > usb2: >>> > > > > SerialNumber: >>> > > > > > 0000:00:1d.7 usb usb2: configuration >>> #1 >>> > chosen from >>> > > 1 >>> > > > choice hub >>> > > > > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 >>> ports >>> > > detected >>> > > > ohci_hcd: >>> > > > > USB 1.1 >>> > > > > > 'Open' Host Controller (OHCI) Driver >>> > uhci_hcd: USB >>> > > > Universal Host >>> > > > > > Controller Interface driver >>> > xen_allocate_pirq: >>> > > returning >>> > > > irq 16 >>> > > > > for gsi >>> > > > > > 16 Already setup the GSI :16 uhci_hcd >>> > 0000:00:1a.0: >>> > > PCI >>> > > > INT A -> >>> > > > > GSI 16 >>> > > > > > (level, low) -> IRQ 16 uhci_hcd >>> > 0000:00:1a.0: UHCI >>> > > Host >>> > > > > Controller >>> > > > > > uhci_hcd 0000:00:1a.0: new USB bus >>> > registered, >>> > > assigned >>> > > > bus >>> > > > > number 3 >>> > > > > > uhci_hcd 0000:00:1a.0: irq 16, io >>> base >>> > 0x000020e0 >>> > > usb >>> > > > usb3: New >>> > > > > USB >>> > > > > > device found, idVendor=1d6b, >>> idProduct=0001 >>> > usb >>> > > usb3: New >>> > > > USB >>> > > > > device >>> > > > > > strings: Mfr=3, Product=2, >>> SerialNumber=1 >>> > usb usb3: >>> > > > Product: UHCI >>> > > > > Host >>> > > > > > Controller usb usb3: Manufacturer: >>> Linux >>> > 2.6.32.9 >>> > > uhci_hcd >>> > > > usb >>> > > > > usb3: >>> > > > > > SerialNumber: 0000:00:1a.0 usb usb3: >>> > configuration >>> > > #1 >>> > > > chosen from >>> > > > > 1 >>> > > > > > choice hub 3-0:1.0: USB hub found hub >>> > 3-0:1.0: 2 >>> > > ports >>> > > > detected >>> > > > > uhci_hcd >>> > > > > > 0000:00:1a.1: PCI INT B -> GSI 21 >>> (level, >>> > low) -> >>> > > IRQ 21 >>> > > > uhci_hcd >>> > > > > > 0000:00:1a.1: UHCI Host Controller >>> uhci_hcd >>> > > 0000:00:1a.1: >>> > > > new USB >>> > > > > bus >>> > > > > > registered, assigned bus number 4 >>> uhci_hcd >>> > > 0000:00:1a.1: >>> > > > irq 21, >>> > > > > io base >>> > > > > > 0x000020c0 usb usb4: New USB device >>> found, >>> > > idVendor=1d6b, >>> > > > > idProduct=0001 >>> > > > > > usb usb4: New USB device strings: >>> Mfr=3, >>> > Product=2, >>> > > > > SerialNumber=1 usb >>> > > > > > usb4: Product: UHCI Host Controller >>> usb >>> > usb4: >>> > > > Manufacturer: Linux >>> > > > > > 2.6.32.9 uhci_hcd usb usb4: >>> SerialNumber: >>> > > 0000:00:1a.1 usb >>> > > > usb4: >>> > > > > > configuration #1 chosen from 1 choice >>> hub >>> > 4-0:1.0: >>> > > USB hub >>> > > > found >>> > > > > hub >>> > > > > > 4-0:1.0: 2 ports detected >>> xen_allocate_pirq: >>> > > returning irq >>> > > > 19 for >>> > > > > gsi 19 >>> > > > > > Already setup the GSI :19 uhci_hcd >>> > 0000:00:1a.2: >>> > > PCI INT D >>> > > > -> GSI >>> > > > > 19 >>> > > > > > (level, low) -> IRQ 19 uhci_hcd >>> > 0000:00:1a.2: UHCI >>> > > Host >>> > > > > Controller >>> > > > > > uhci_hcd 0000:00:1a.2: new USB bus >>> > registered, >>> > > assigned >>> > > > bus >>> > > > > number 5 >>> > > > > > uhci_hcd 0000:00:1a.2: irq 19, io >>> base >>> > 0x000020a0 >>> > > usb >>> > > > usb5: New >>> > > > > USB >>> > > > > > device found, idVendor=1d6b, >>> idProduct=0001 >>> > usb >>> > > usb5: New >>> > > > USB >>> > > > > device >>> > > > > > strings: Mfr=3, Product=2, >>> SerialNumber=1 >>> > usb usb5: >>> > > > Product: UHCI >>> > > > > Host >>> > > > > > Controller usb usb5: Manufacturer: >>> Linux >>> > 2.6.32.9 >>> > > uhci_hcd >>> > > > usb >>> > > > > usb5: >>> > > > > > SerialNumber: 0000:00:1a.2 usb usb5: >>> > configuration >>> > > #1 >>> > > > chosen from >>> > > > > 1 >>> > > > > > choice hub 5-0:1.0: USB hub found hub >>> > 5-0:1.0: 2 >>> > > ports >>> > > > detected >>> > > > > > xen_allocate_pirq: returning irq 23 >>> for gsi >>> > 23 >>> > > Already >>> > > > setup the >>> > > > > GSI :23 >>> > > > > > uhci_hcd 0000:00:1d.0: PCI INT A -> >>> GSI 23 >>> > (level, >>> > > low) -> >>> > > > IRQ 23 >>> > > > > > uhci_hcd 0000:00:1d.0: UHCI Host >>> Controller >>> > > uhci_hcd >>> > > > > 0000:00:1d.0: new >>> > > > > > USB bus registered, assigned bus >>> number 6 >>> > uhci_hcd >>> > > > 0000:00:1d.0: >>> > > > > irq 23, >>> > > > > > io base 0x00002080 usb usb6: New USB >>> device >>> > found, >>> > > > idVendor=1d6b, >>> > > > > > idProduct=0001 usb usb6: New USB >>> device >>> > strings: >>> > > Mfr=3, >>> > > > > Product=2, >>> > > > > > SerialNumber=1 usb usb6: Product: >>> UHCI Host >>> > > Controller usb >>> > > > usb6: >>> > > > > > Manufacturer: Linux 2.6.32.9 uhci_hcd >>> usb >>> > usb6: >>> > > > SerialNumber: >>> > > > > > 0000:00:1d.0 usb usb6: configuration >>> #1 >>> > chosen from >>> > > 1 >>> > > > choice hub >>> > > > > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 >>> ports >>> > > detected >>> > > > > xen_allocate_pirq: >>> > > > > > returning irq 19 for gsi 19 Already >>> setup >>> > the GSI >>> > > :19 >>> > > > uhci_hcd >>> > > > > > 0000:00:1d.1: PCI INT B -> GSI 19 >>> (level, >>> > low) -> >>> > > IRQ 19 >>> > > > uhci_hcd >>> > > > > > 0000:00:1d.1: UHCI Host Controller >>> uhci_hcd >>> > > 0000:00:1d.1: >>> > > > new USB >>> > > > > bus >>> > > > > > registered, assigned bus number 7 >>> uhci_hcd >>> > > 0000:00:1d.1: >>> > > > irq 19, >>> > > > > io base >>> > > > > > 0x00002060 usb usb7: New USB device >>> found, >>> > > idVendor=1d6b, >>> > > > > idProduct=0001 >>> > > > > > usb usb7: New USB device strings: >>> Mfr=3, >>> > Product=2, >>> > > > > SerialNumber=1 usb >>> > > > > > usb7: Product: UHCI Host Controller >>> usb >>> > usb7: >>> > > > Manufacturer: Linux >>> > > > > > 2.6.32.9 uhci_hcd usb usb7: >>> SerialNumber: >>> > > 0000:00:1d.1 usb >>> > > > usb7: >>> > > > > > configuration #1 chosen from 1 choice >>> hub >>> > 7-0:1.0: >>> > > USB hub >>> > > > found >>> > > > > hub >>> > > > > > 7-0:1.0: 2 ports detected >>> xen_allocate_pirq: >>> > > returning irq >>> > > > 18 for >>> > > > > gsi 18 >>> > > > > > Already setup the GSI :18 uhci_hcd >>> > 0000:00:1d.2: >>> > > PCI INT C >>> > > > -> GSI >>> > > > > 18 >>> > > > > > (level, low) -> IRQ 18 uhci_hcd >>> > 0000:00:1d.2: UHCI >>> > > Host >>> > > > > Controller >>> > > > > > uhci_hcd 0000:00:1d.2: new USB bus >>> > registered, >>> > > assigned >>> > > > bus >>> > > > > number 8 >>> > > > > > uhci_hcd 0000:00:1d.2: irq 18, io >>> base >>> > 0x00002040 >>> > > usb >>> > > > usb8: New >>> > > > > USB >>> > > > > > device found, idVendor=1d6b, >>> idProduct=0001 >>> > usb >>> > > usb8: New >>> > > > USB >>> > > > > device >>> > > > > > strings: Mfr=3, Product=2, >>> SerialNumber=1 >>> > usb usb8: >>> > > > Product: UHCI >>> > > > > Host >>> > > > >>> > > >>> > > References >>> > > >>> > > Visible links >>> > > 1. mailto:[20][21]pasik@iki.fi >>> > > 2. mailto:[21][22]pasik@iki.fi >>> > > 3. mailto:[22][23]pasik@iki.fi >>> > > 4. mailto:[23][24]pasik@iki.fi >>> > > 5. mailto:[24][25]pasik@iki.fi >>> > > 6. >>> > >>> [25][26]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > > 7. >>> > >>> [26][27]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > > 8. mailto:[27][28]pasik@iki.fi >>> > > 9. >>> > >>> [28][29]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > > 10. >>> > >>> [29][30]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > > 11. mailto:[30][31]pasik@iki.fi >>> > > 12. mailto:[31][32]pasik@iki.fi >>> > > 13. >>> > >>> [32][33]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > > 14. >>> > >>> [33][34]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > > 15. mailto:[34][35]pasik@iki.fi >>> > > 16. >>> > >>> [35][36]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > > 17. >>> > >>> [36][37]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > > 18. mailto:[37][38]pasik@iki.fi >>> > >>> > References >>> > >>> > Visible links >>> > 1. mailto:[39]pasik@iki.fi >>> > 2. mailto:[40]pasik@iki.fi >>> > 3. mailto:[41]pasik@iki.fi >>> > 4. mailto:[42]pasik@iki.fi >>> > 5. mailto:[43]pasik@iki.fi >>> > 6. mailto:[44]pasik@iki.fi >>> > 7. >>> [45]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > 8. >>> [46]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > 9. mailto:[47]pasik@iki.fi >>> > 10. >>> [48]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > 11. >>> [49]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > 12. mailto:[50]pasik@iki.fi >>> > 13. mailto:[51]pasik@iki.fi >>> > 14. >>> [52]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > 15. >>> [53]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > 16. mailto:[54]pasik@iki.fi >>> > 17. >>> [55]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > 18. >>> [56]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > 19. mailto:[57]pasik@iki.fi >>> > 20. mailto:[58]pasik@iki.fi >>> > 21. mailto:[59]pasik@iki.fi >>> > 22. mailto:[60]pasik@iki.fi >>> > 23. mailto:[61]pasik@iki.fi >>> > 24. mailto:[62]pasik@iki.fi >>> > 25. >>> [63]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > 26. >>> [64]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > 27. mailto:[65]pasik@iki.fi >>> > 28. >>> [66]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > 29. >>> [67]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > 30. mailto:[68]pasik@iki.fi >>> > 31. mailto:[69]pasik@iki.fi >>> > 32. >>> [70]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > 33. >>> [71]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > 34. mailto:[72]pasik@iki.fi >>> > 35. >>> [73]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > 36. >>> [74]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > 37. mailto:[75]pasik@iki.fi >>> >>> References >>> >>> Visible links >>> 1. mailto:pasik@iki.fi >>> 2. mailto:pasik@iki.fi >>> 3. mailto:pasik@iki.fi >>> 4. mailto:pasik@iki.fi >>> 5. mailto:pasik@iki.fi >>> 6. mailto:pasik@iki.fi >>> 7. mailto:pasik@iki.fi >>> 8. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 9. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 10. mailto:pasik@iki.fi >>> 11. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 12. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 13. mailto:pasik@iki.fi >>> 14. mailto:pasik@iki.fi >>> 15. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 16. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 17. mailto:pasik@iki.fi >>> 18. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 19. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 20. mailto:pasik@iki.fi >>> 21. mailto:pasik@iki.fi >>> 22. mailto:pasik@iki.fi >>> 23. mailto:pasik@iki.fi >>> 24. mailto:pasik@iki.fi >>> 25. mailto:pasik@iki.fi >>> 26. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 27. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 28. mailto:pasik@iki.fi >>> 29. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 30. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 31. mailto:pasik@iki.fi >>> 32. mailto:pasik@iki.fi >>> 33. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 34. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 35. mailto:pasik@iki.fi >>> 36. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 37. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 38. mailto:pasik@iki.fi >>> 39. mailto:pasik@iki.fi >>> 40. mailto:pasik@iki.fi >>> 41. mailto:pasik@iki.fi >>> 42. mailto:pasik@iki.fi >>> 43. mailto:pasik@iki.fi >>> 44. mailto:pasik@iki.fi >>> 45. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 46. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 47. mailto:pasik@iki.fi >>> 48. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 49. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 50. mailto:pasik@iki.fi >>> 51. mailto:pasik@iki.fi >>> 52. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 53. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 54. mailto:pasik@iki.fi >>> 55. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 56. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 57. mailto:pasik@iki.fi >>> 58. mailto:pasik@iki.fi >>> 59. mailto:pasik@iki.fi >>> 60. mailto:pasik@iki.fi >>> 61. mailto:pasik@iki.fi >>> 62. mailto:pasik@iki.fi >>> 63. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 64. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 65. mailto:pasik@iki.fi >>> 66. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 67. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 68. mailto:pasik@iki.fi >>> 69. mailto:pasik@iki.fi >>> 70. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 71. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 72. mailto:pasik@iki.fi >>> 73. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 74. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 75. mailto:pasik@iki.fi >>> >> >> > ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: crash in print_all_ICs() 2010-03-19 19:05 ` Pasi Kärkkäinen @ 2010-03-19 19:57 ` kishore kumar 2010-03-19 20:03 ` Pasi Kärkkäinen 0 siblings, 1 reply; 32+ messages in thread From: kishore kumar @ 2010-03-19 19:57 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users [-- Attachment #1.1: Type: text/plain, Size: 170905 bytes --] Attached is the captured file. Now the machine booted up. :) 2.6.32.10 is booted. But I dont see xen up and running. Whe I open Virtual Machine Manager I dont see xen running. (ATTACHED IS THE SCREEN SHOT). On Fri, Mar 19, 2010 at 12:05 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote: > On Fri, Mar 19, 2010 at 11:22:54AM -0700, Jeremy Fitzhardinge wrote: > > On 03/19/2010 10:59 AM, Pasi Kärkkäinen wrote: > >> On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar wrote: > >> > >>> Attached is the capture log after changing the grub.conf to > >>> > >>> ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen > nomodeset > >>> initcall_debug debug swiotlb=force apic=debug loglevel=10 > >>> > >>> for the dom 0 kernel command line. > >>> > >>> > >> Hmm, interesting. Now it seems to crash in a different place. > >> > >> Jeremy: Have you seen this one earlier? > >> > > > > No, but it looks like the result of "apic=debug" on the kernel command > > line. That won't do anything useful (the kernel has no APICs, they all > > belong to Xen), and can only cause harm. As it appears to have done. > > > > Ok, my bad. > > So please remove the "apic=debug" from the dom0 kernel cmdline and try > again. > It should look like this: > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset > initcall_debug debug loglevel=10 > > -- Pasi > > > J > > > >> .... IRQ redirection table: > >> NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: > >> 00 000 0 0 0 0 0 0 0 00 > >> IRQ to pin mappings: > >> BUG: unable to handle kernel NULL pointer dereference at (null) > >> IP: [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 > >> PGD 0 > >> Oops: 0000 [#1] SMP > >> last sysfs file: > >> CPU 0 > >> Modules linked in: > >> Pid: 1, comm: swapper Not tainted 2.6.32.10 #2 > >> RIP: e030:[<ffffffff819bf0e0>] [<ffffffff819bf0e0>] > print_all_ICs+0x487/0x500 > >> RSP: e02b:ffff880064edbe20 EFLAGS: 00010286 > >> RAX: ffffffff816ed2c0 RBX: 0000000000000000 RCX: 000000000f640f01 > >> RDX: ffff880066808000 RSI: ffff880064edbd40 RDI: 0000000000000000 > >> RBP: ffff880064edbea0 R08: 0000000000000002 R09: 0000000000000000 > >> R10: 0000000000000000 R11: ffff880064edbce0 R12: 0000000000000000 > >> R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 > >> FS: 0000000000000000(0000) GS:ffff880005ec8000(0000) > knlGS:0000000000000000 > >> CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b > >> CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002660 > >> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > >> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > >> Process swapper (pid: 1, threadinfo ffff880064eda000, task > ffff880064ee0000) > >> Stack: > >> ffff880000000000 ffffffff00000000 ffff880000000000 ffffffff811ebee8 > >> <0> ffff880064edbe60 0000000181083e7c 000000ff00000002 0000000000000002 > >> <0> ffff880000000000 ffffffff810846f0 ffffffff817ce660 00000000291fd332 > >> Call Trace: > >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e > >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93 > >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 > >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc > >> [<ffffffff81013eaa>] child_rip+0xa/0x20 > >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > >> [<ffffffff81013810>] ? restore_args+0x0/0x30 > >> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 > >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20 > >> Code: 45 b0 0f 8c 5b fd ff ff 48 c7 c7 34 40 60 81 31 c0 45 31 e4 e8 11 > d5 69 ff 31 ff e8 67 b5 6f ff eb 5a 48 85 c0 74 4a 48 8b 58 40<48> 83 3b 00 > 74 40 44 89 e6 48 c7 c7 4d 40 60 81 31 c0 e8 e8 d4 > >> RIP [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 > >> RSP<ffff880064edbe20> > >> CR2: 0000000000000000 > >> ---[ end trace 0007ad9d59420718 ]--- > >> swapper used greatest stack depth: 4168 bytes left > >> Kernel panic - not syncing: Attempted to kill init! > >> Pid: 1, comm: swapper Tainted: G D 2.6.32.10 #2 > >> Call Trace: > >> [<ffffffff8105b747>] panic+0xa5/0x167 > >> [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf > >> [<ffffffff8105f2b3>] ? do_exit+0x38a/0x701 > >> [<ffffffff8100f43f>] ? xen_restore_fl_direct_end+0x0/0x1 > >> [<ffffffff8108f823>] ? lock_release+0x179/0x184 > >> [<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf > >> [<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c > >> [<ffffffff8105efa7>] do_exit+0x7e/0x701 > >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef > >> [<ffffffff8147764c>] oops_end+0xbf/0xc7 > >> [<ffffffff81038a02>] no_context+0x1f1/0x200 > >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef > >> [<ffffffff81038c61>] __bad_area_nosemaphore+0x191/0x1b4 > >> [<ffffffff8100f452>] ? check_events+0x12/0x20 > >> [<ffffffff81038d0e>] bad_area_nosemaphore+0x13/0x15 > >> [<ffffffff81478b20>] do_page_fault+0x16d/0x2a2 > >> [<ffffffff814769d5>] page_fault+0x25/0x30 > >> [<ffffffff819bf0e0>] ? print_all_ICs+0x487/0x500 > >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e > >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93 > >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 > >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc > >> [<ffffffff81013eaa>] child_rip+0xa/0x20 > >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > >> [<ffffffff81013810>] ? restore_args+0x0/0x30 > >> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 > >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20 > >> > >> > >> -- Pasi > >> > >> > >> > >>> > >>> On Thu, Mar 18, 2010 at 2:27 PM, Pasi Kärkkäinen<[1]pasik@iki.fi> > wrote: > >>> > >>> On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar wrote: > >>> > pvdisplay does not work in my RHEL machine. > >>> > > >>> > I did pvscan. > >>> > below is the output. > >>> > > >>> > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free] > >>> > > >>> > Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no VG: 0 > [0 ] > >>> > > >>> > >>> Ok so /dev/sda2 is the correct device holding the VolGroup01. > >>> > >>> Looking at your latest capture.doc I see this: > >>> > >>> Command line: ro root=/dev/vg00/lv01 console=hvc0 > earlyprintk=xen > >>> nomodeset initcall_debug debug swiotlb=force apic=debug > loglevel=10 > >>> > >>> So your root= parameter is wrong! Edit grub.conf and replace it > with the > >>> actual root device: > >>> root=/dev/VolGroup01/LogVol00 > >>> > >>> -- Pasi > >>> > >>> > On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen > >>> <[1][2]pasik@iki.fi> wrote: > >>> > > >>> > On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore kumar > wrote: > >>> > > I did the below steps for pvops dom 0 kernel. > >>> > > > >>> > > make menuconfig > >>> > > make bzImage > >>> > > make modules > >>> > > make modules_install > >>> > > cp -a .config /boot/config-2.6.32.10 > >>> > > cp -a System.map /boot/System.map-2.6.32.10 > >>> > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10 > >>> > > /sbin/mkinitrd -f --builtin=ahci > /boot/initrd-2.6.32.10.img > >>> > 2.6.32.10 > >>> > > I tried root=/dev/VolGroup01/LogVol00 . > >>> > > > >>> > > >>> > Ok. > >>> > > >>> > Please run "pvdisplay" to see which actual partition is > the LVM > >>> PV for > >>> > your > >>> > volume group. > >>> > > >>> > Also if you're running Fedora 12 you could try generating > an > >>> initrd > >>> > image > >>> > with dracut instead of mkinitrd. > >>> > > >>> > -- Pasi > >>> > > >>> > > > >>> > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen > >>> > <[1][2][3]pasik@iki.fi> wrote: > >>> > > > >>> > > On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore > kumar > >>> wrote: > >>> > > > Here is the output of df -h and cat > /etc/fstab of my > >>> > machine. > >>> > > > > >>> > > > >>> > > Did you try both > root=/dev/mapper/VolGroup01-LogVol00 and > >>> > > root=/dev/VolGroup01/LogVol00 arguments for the > dom0 > >>> kernel? > >>> > > > >>> > > How did you generate the initrd image for the > dom0 kernel? > >>> > > > >>> > > Anyway this sounds like a grub.conf or initrd > problem, not > >>> Xen or > >>> > pvops > >>> > > dom0 kernel kernel problem. > >>> > > > >>> > > -- Pasi > >>> > > > >>> > > > Please let me know your thoughts. > >>> > > > > >>> > > > [root@localhost kishore]# df -h > >>> > > > > >>> > > > Filesystem Size Used Avail Use% Mounted on > >>> > > > > >>> > > > /dev/mapper/VolGroup01-LogVol00 > >>> > > > > >>> > > > 223G > 29G 182G 14% > >>> / > >>> > > > > >>> > > > /dev/sda1 99M 81M 13M 87% /boot > >>> > > > > >>> > > > tmpfs 757M 0 757M 0% /dev/shm > >>> > > > > >>> > > > [root@localhost kishore]# cat /etc/fstab > >>> > > > > >>> > > > /dev/VolGroup01/LogVol00 / ext3 defaults 1 > 1 > >>> > > > > >>> > > > LABEL=/boot /boot ext3 defaults 1 2 > >>> > > > > >>> > > > tmpfs /dev/shm tmpfs defaults 0 0 > >>> > > > > >>> > > > devpts /dev/pts devpts gid=5,mode=620 0 0 > >>> > > > > >>> > > > sysfs /sys sysfs defaults 0 0 > >>> > > > > >>> > > > proc /proc proc defaults 0 0 > >>> > > > > >>> > > > /dev/VolGroup01/LogVol01 swap swap defaults > 0 0 > >>> > > > > >>> > > > [root@localhost kishore]# > >>> > > > > >>> > > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi > Kärkkäinen > >>> > > <[1][2][3][4]pasik@iki.fi> wrote: > >>> > > > > >>> > > > On Tue, Mar 16, 2010 at 03:40:46PM -0700, > kishore > >>> kumar > >>> > wrote: > >>> > > > > I am not sure. Can you please let > me know how > >>> to > >>> > check > >>> > > this? any > >>> > > > command > >>> > > > > ?? > >>> > > > > >>> > > > well simple "df -h" will show it. and > also "cat > >>> > /etc/fstab". > >>> > > > You can also check it from your grub > >>> configuration.. from > >>> > the > >>> > > working > >>> > > > baremetal (non-Xen) entry. > >>> > > > > >>> > > > -- Pasi > >>> > > > > > >>> > > > > On Tue, Mar 16, 2010 at 3:29 PM, > Pasi > >>> Kärkkäinen > >>> > > > <[1][2][3][4][5]pasik@iki.fi> wrote: > >>> > > > > > >>> > > > > On Tue, Mar 16, 2010 at > 03:22:50PM -0700, > >>> kishore > >>> > kumar > >>> > > wrote: > >>> > > > > > attached is the log > captured in with > >>> the word > >>> > > document . > >>> > > > > > > >>> > > > > > >>> > > > > Scanning logical volumes > >>> > > > > Reading all physical volumes. > This may > >>> take a > >>> > while... > >>> > > > > Activating logical volumes > >>> > > > > Volume group "VolGroup01" not > found > >>> > > > > Trying to resume from > >>> /dev/VolGroup01/LogVol01 > >>> > > > > Unable to access resume device > >>> > (/dev/VolGroup01/LogVol01) > >>> > > > > Creating root device. > >>> > > > > Mounting root filesystem. > >>> > > > > mount: could not find filesystem > '/dev/root' > >>> > > > > Setting up other filesystems. > >>> > > > > Setting up new root fs > >>> > > > > setuproot: moving /dev failed: No > such file > >>> or > >>> > directory > >>> > > > > no fstab.sys, mounting internal > defaults > >>> > > > > setuproot: error mounting /proc: > No such > >>> file or > >>> > directory > >>> > > > > setuproot: error mounting /sys: > No such file > >>> or > >>> > directory > >>> > > > > Switching to new root and running > init. > >>> > > > > unmounting old /dev > >>> > > > > unmounting old /proc > >>> > > > > unmounting old /sys > >>> > > > > switchroot: mount failed: No such > file or > >>> directory > >>> > > > > init used greatest stack depth: > 4088 bytes > >>> left > >>> > > > > Kernel panic - not syncing: > Attempted to > >>> kill init! > >>> > > > > > >>> > > > > So it seems it gets all the way > to executing > >>> the > >>> > initrd > >>> > > image, > >>> > > > > which then fails to mount the > root fs. > >>> > > > > > >>> > > > > Earlier in the log: > >>> > > > > ata1: SATA link up 3.0 Gbps > (SStatus 123 > >>> SControl > >>> > 300) > >>> > > > > ata1.00: ATA-8: Hitachi > HDT721025SLA380, > >>> STBOA3AA, > >>> > max > >>> > > UDMA/133 > >>> > > > > ata1.00: 488397168 sectors, multi > 0: LBA48 > >>> NCQ > >>> > (depth > >>> > > 31/32), AA > >>> > > > > ata1.00: configured for UDMA/133 > >>> > > > > scsi 0:0:0:0: Direct-Access > ATA > >>> Hitachi > >>> > HDT72102 > >>> > > STBO > >>> > > > PQ: 0 > >>> > > > > ANSI: 5 > >>> > > > > sd 0:0:0:0: Attached scsi generic > sg0 type 0 > >>> > > > > sd 0:0:0:0: [sda] 488397168 > 512-byte logical > >>> > blocks: (250 > >>> > > GB/232 > >>> > > > GiB) > >>> > > > > sd 0:0:0:0: [sda] Write Protect > is off > >>> > > > > sd 0:0:0:0: [sda] Mode Sense: 00 > 3a 00 00 > >>> > > > > sd 0:0:0:0: [sda] Write cache: > enabled, read > >>> cache: > >>> > > enabled, > >>> > > > doesn't > >>> > > > > support DPO or FUA > >>> > > > > sda: sda1 sda2 > >>> > > > > sd 0:0:0:0: [sda] Attached SCSI > disk > >>> > > > > > >>> > > > > so /dev/sda was detected. Is your > root lvm > >>> volume > >>> > on > >>> > > /dev/sda ? > >>> > > > > Is /dev/VolGroup01/LogVol01 > really your root > >>> fs? > >>> > > > > > >>> > > > > -- Pasi > >>> > > > > > >>> > > > > > > >>> > > > > > > >>> > > > > > On Tue, Mar 16, 2010 at > 3:03 PM, Pasi > >>> > Kärkkäinen > >>> > > > > <[1][2][3][4][5][6]pasik@iki.fi> > wrote: > >>> > > > > > > >>> > > > > > On Tue, Mar 16, 2010 at > 02:56:06PM > >>> -0700, > >>> > kishore > >>> > > kumar > >>> > > > wrote: > >>> > > > > > > Please find the > attached log > >>> file after > >>> > fixing > >>> > > the > >>> > > > dom 0 > >>> > > > > kernel cmd > >>> > > > > > line > >>> > > > > > > as below > >>> > > > > > > > >>> > > > > > > ro > root=/dev/VolGroup01/LogVol00 > >>> > console=hvc0 > >>> > > > > earlyprintk=xen > >>> > > > > > nomodeset > >>> > > > > > > > >>> > > > > > > >>> > > > > > There's something wrong > with the log, > >>> the > >>> > dom0 > >>> > > kernel > >>> > > > parts are > >>> > > > > all on > >>> > > > > > one line.. > >>> > > > > > It's really difficult to > read it. > >>> > > > > > > >>> > > > > > -- Pasi > >>> > > > > > > >>> > > > > > > Thanks > >>> > > > > > > > >>> > > > > > > > >>> > > > > > > On Tue, Mar 16, > 2010 at 2:29 PM, > >>> Pasi > >>> > > Kärkkäinen > >>> > > > > > <[1][2][3][4][5][6][7] > pasik@iki.fi> > >>> wrote: > >>> > > > > > > > >>> > > > > > > On Tue, Mar 16, > 2010 at > >>> 02:16:22PM > >>> > -0700, > >>> > > kishore > >>> > > > kumar > >>> > > > > wrote: > >>> > > > > > > > I did below > steps. > >>> > > > > > > > > >>> > > > > > > > > >>> > > > > > > > I pulled > DOM 0 kernel > >>> from > >>> > > > > > > > git clone > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> git://[1][2][3][4][5][6][7][8] > git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > > > > > > > > linux-2.6-xen > >>> > > > > > > > > >>> > > > > > > > cd > linux-2.6-xen > >>> > > > > > > > > >>> > > > > > > > make clean > >>> > > > > > > > > >>> > > > > > > > cp -a > .config .config-old > >>> > > > > > > > > >>> > > > > > > > wget -O > .config > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> [2][3][4][5][6][7][8][9] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > > > > > > > > >>> > > > > > > > make > oldconfig > >>> > > > > > > > > >>> > > > > > > > make > bzImage > >>> > > > > > > > > >>> > > > > > > > make > modules > >>> > > > > > > > > >>> > > > > > > > make > modules_install > >>> > > > > > > > > >>> > > > > > > > cp -a > .config > >>> > /boot/config-2.6.32.9 > >>> > > > > > > > > >>> > > > > > > > cp -a > System.map > >>> > > /boot/System.map-2.6.32.9 > >>> > > > > > > > > >>> > > > > > > > cp -a > >>> arch/x86/boot/bzImage > >>> > > > /boot/vmlinuz-2.6.32.9 > >>> > > > > > > > > >>> > > > > > > > and > modified the > >>> grub.conf as > >>> > below > >>> > > > > > > > > >>> > > > > > > > > >>> > > > > > > > Root(hd0,0) > >>> > > > > > > > > >>> > > > > > > > kernel > /xen.gz > >>> console=vga,com1 > >>> > > > com1=115200,8n1 > >>> > > > > msi=1 > >>> > > > > > iommu=1 > >>> > > > > > > > > >>> > > > > > > > module > /vmlinuz-2.6.32.9 > >>> ro > >>> > > > > root=/dev/VolGroup01/LogVo100 > >>> > > > > > rhgb > >>> > > > > > > quiet > >>> > > > > > > > > >>> > > > > > > > module > >>> /initrd-2.6.32.9.img > >>> > > > > > > > > >>> > > > > > > > > >>> > > > > > > > and > rebooted the machine. > >>> Then > >>> > It > >>> > > booted with > >>> > > > some > >>> > > > > xen > >>> > > > > > messages > >>> > > > > > > and > >>> > > > > > > > stopped. > Those were the > >>> > messages > >>> > > captured > >>> > > > from > >>> > > > > serial > >>> > > > > > console. > >>> > > > > > > > > >>> > > > > > > > Please let > me know if I > >>> did > >>> > something > >>> > > wrong > >>> > > > here. > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > Please fix the > kernel cmdline > >>> based > >>> > on my > >>> > > earlier > >>> > > > email, > >>> > > > > and > >>> > > > > > capture and > >>> > > > > > > post the > >>> > > > > > > serial console > log again! > >>> > > > > > > > >>> > > > > > > -- Pasi > >>> > > > > > > > > >>> > > > > > > > > >>> > > > > > > > On Tue, Mar > 16, 2010 at > >>> 1:20 PM, > >>> > Pasi > >>> > > > Kärkkäinen > >>> > > > > > > > >>> <[3][4][5][6][7][8][9][10]pasik@iki.fi> > >>> > wrote: > >>> > > > > > > > > >>> > > > > > > > On Tue, > Mar 16, 2010 at > >>> > 01:16:28PM > >>> > > -0700, > >>> > > > Jeremy > >>> > > > > > Fitzhardinge > >>> > > > > > > wrote: > >>> > > > > > > > > On > 03/16/2010 12:48 > >>> PM, Pasi > >>> > > Kärkkäinen > >>> > > > wrote: > >>> > > > > > > > >> On > Tue, Mar 16, 2010 > >>> at > >>> > 09:43:44PM > >>> > > +0200, > >>> > > > Pasi > >>> > > > > > Kärkkäinen > >>> > > > > > > wrote: > >>> > > > > > > > >> > >>> > > > > > > > >>> On > Tue, Mar 16, > >>> 2010 at > >>> > > 10:32:17AM > >>> > > > -0700, > >>> > > > > kishore > >>> > > > > > kumar > >>> > > > > > > wrote: > >>> > > > > > > > >>> > >>> > > > > > > > >>>> > Attached is > >>> the > >>> > output > >>> > > captured > >>> > > > from > >>> > > > > serial > >>> > > > > > console. > >>> > > > > > > > >>>> > >>> > > > > > > > >>>> > Machine does > >>> not boot > >>> > after > >>> > > > compiling xen > >>> > > > > 3.4.3 > >>> > > > > > with > >>> > > > > > > pv_ops dom > >>> > > > > > > > 0 kernel. > >>> > > > > > > > >>>> > >>> > > > > > > > >>>> > Please let me > >>> know > >>> > what is > >>> > > going > >>> > > > wrong > >>> > > > > here. > >>> > > > > > > > >>>> > >>> > > > > > > > >>>> > >>> > > > > > > > >>> Ok > this looks like > >>> a bug > >>> > that is > >>> > > already > >>> > > > being > >>> > > > > sorted > >>> > > > > > out on > >>> > > > > > > > xen-devel > mailinglist. > >>> > > > > > > > >>> I > added CC to > >>> xen-devel. > >>> > > > > > > > >>> > >>> > > > > > > > >>> > >>> > > > > > > > >> > >>> > > > > > > > > > >>> > > > > > > > > Those > messages are > >>> not a > >>> > problem in > >>> > > > themselves, > >>> > > > > but the > >>> > > > > > related > >>> > > > > > > > problem > >>> > > > > > > > > is > believed to be > >>> fixed in > >>> > current > >>> > > > > xen/stable-2.6.32.x. > >>> > > > > > It > >>> > > > > > > looks like > >>> > > > > > > > > the > output stops > >>> there > >>> > because the > >>> > > Xen > >>> > > > console > >>> > > > > isn't set > >>> > > > > > up > >>> > > > > > > properly > >>> > > > > > > > for > >>> > > > > > > > > some > reason. > >>> > > > > > > > > > >>> > > > > > > > > >>> > > > > > > > Yeah, > remove "rhgb > >>> quiet" from > >>> > the > >>> > > options.. > >>> > > > the > >>> > > > > dom0 > >>> > > > > > kernel > >>> > > > > > > cmdline > >>> > > > > > > > should be > like this: > >>> > > > > > > > ro > >>> > root=/dev/VolGroup01/LogVol00 > >>> > > > console=hvc0 > >>> > > > > > earlyprintk=xen > >>> > > > > > > nomodeset > >>> > > > > > > > -- Pasi > >>> > > > > > > > > >>> > > > > > > > References > >>> > > > > > > > > >>> > > > > > > > Visible > links > >>> > > > > > > > 1. > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> [5][6][7][8][9][10][11] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > > > > > > > 2. > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> [6][7][8][9][10][11][12] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > > > > > > > 3. > >>> > mailto:[7][8][9][10][11][12][13]pasik@iki.fi > >>> > > > > > > > >>> > > > > > > References > >>> > > > > > > > >>> > > > > > > Visible links > >>> > > > > > > 1. > >>> > mailto:[9][10][11][12][13][14]pasik@iki.fi > >>> > > > > > > 2. > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> [10][11][12][13][14][15] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > > > > > > 3. > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> [11][12][13][14][15][16] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > > > > > > 4. > >>> > mailto:[12][13][14][15][16][17]pasik@iki.fi > >>> > > > > > > 5. > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> [13][14][15][16][17][18] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > > > > > > 6. > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> [14][15][16][17][18][19] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > > > > > > 7. > >>> > mailto:[15][16][17][18][19][20]pasik@iki.fi > >>> > > > > > > Asserting Post > complete GPIO!!! > >>> > > > > > > Transfer control to > CSM 16-bit > >>> binary for > >>> > legacy > >>> > > boot > >>> > > > > > > __ __ > _____ _ _ > >>> _____ > >>> > > _ _ > >>> > > > > > > \ \/ /___ _ __ |___ > /| || | > >>> |___ / > >>> > _ __ > >>> > > ___| || | > >>> > > > _ > >>> > > > > __ _ > >>> > > > > > __ ___ > >>> > > > > > > \ // _ \ '_ \ |_ > \| || |_ > >>> |_ \ __| > >>> > '__/ > >>> > > __| || > >>> > > > |_ __| > >>> > > > > '_ \| > >>> > > > > > '__/ _ \ > >>> > > > > > > / \ __/ | | | > ___) |__ _| > >>> ___) |__| > >>> > | | > >>> > > (__|__ > >>> > > > _|__| > >>> > > > > |_) | | > >>> > > > > > | __/ > >>> > > > > > > /_/\_\___|_| |_| > |____(_) > >>> |_|(_)____/ > >>> > |_| > >>> > > \___| |_| > >>> > > > | > >>> > > > > .__/|_| > >>> > > > > > \___| > >>> > > > > > > > >>> > > > |_| > >>> > > > > > > (XEN) Xen version > 3.4.3-rc4-pre > >>> > > (kishore@localdomain) > >>> > > > (gcc > >>> > > > > version > >>> > > > > > 4.1.2 20080704 (Red Hat > 4.1.2-46)) > >>> Mon Mar > >>> > 15 > >>> > > 13:44:31 PDT > >>> > > > 2010 > >>> > > > > > > (XEN) Latest > ChangeSet: Tue Mar 09 > >>> > 18:15:52 2010 > >>> > > +0000 > >>> > > > > > 19924:6e72f8c3c017 > >>> > > > > > > (XEN) Command line: > >>> console=vga,com1 > >>> > > com1=115200,8n1 > >>> > > > msi=1 > >>> > > > > iommu=1 > >>> > > > > > > (XEN) Video > information: > >>> > > > > > > (XEN) VGA is text > mode 80x25, font > >>> 8x16 > >>> > > > > > > (XEN) VBE/DDC > methods: none; EDID > >>> > transfer time: > >>> > > 0 > >>> > > > seconds > >>> > > > > > > (XEN) EDID info not > retrieved > >>> because no > >>> > DDC > >>> > > retrieval > >>> > > > method > >>> > > > > > detected > >>> > > > > > > (XEN) Disc > information: > >>> > > > > > > (XEN) Found 1 MBR > signatures > >>> > > > > > > (XEN) Found 1 EDD > information > >>> structures > >>> > > > > > > (XEN) Xen-e820 RAM > map: > >>> > > > > > > (XEN) > 0000000000000000 - > >>> 000000000009d000 > >>> > > (usable) > >>> > > > > > > (XEN) > 000000000009d000 - > >>> 00000000000a0000 > >>> > > (reserved) > >>> > > > > > > (XEN) > 00000000000e0000 - > >>> 0000000000100000 > >>> > > (reserved) > >>> > > > > > > (XEN) > 0000000000100000 - > >>> 000000006d597000 > >>> > > (usable) > >>> > > > > > > (XEN) > 000000006d597000 - > >>> 000000006d686000 > >>> > > (reserved) > >>> > > > > > > (XEN) > 000000006d686000 - > >>> 000000006f598000 > >>> > > (usable) > >>> > > > > > > (XEN) > 000000006f598000 - > >>> 000000006f59a000 > >>> > > (reserved) > >>> > > > > > > (XEN) > 000000006f59a000 - > >>> 000000006f5af000 > >>> > (ACPI > >>> > > NVS) > >>> > > > > > > (XEN) > 000000006f5af000 - > >>> 000000006f5d9000 > >>> > > (reserved) > >>> > > > > > > (XEN) > 000000006f5d9000 - > >>> 000000006f5f9000 > >>> > (ACPI > >>> > > data) > >>> > > > > > > (XEN) > 000000006f5f9000 - > >>> 000000006f6df000 > >>> > (ACPI > >>> > > NVS) > >>> > > > > > > (XEN) > 000000006f6df000 - > >>> 000000006f700000 > >>> > (ACPI > >>> > > data) > >>> > > > > > > (XEN) > 000000006f700000 - > >>> 0000000080000000 > >>> > > (reserved) > >>> > > > > > > (XEN) > 00000000a0000000 - > >>> 00000000b0000000 > >>> > > (reserved) > >>> > > > > > > (XEN) > 00000000fc000000 - > >>> 00000000fd000000 > >>> > > (reserved) > >>> > > > > > > (XEN) > 00000000fed1c000 - > >>> 00000000fed20000 > >>> > > (reserved) > >>> > > > > > > (XEN) > 00000000ffc00000 - > >>> 0000000100000000 > >>> > > (reserved) > >>> > > > > > > (XEN) System RAM: > 1780MB > >>> (1823000kB) > >>> > > > > > > (XEN) ACPI: RSDP > 000F03F0, 0024 (r2 > >>> INTEL > >>> > ) > >>> > > > > > > (XEN) ACPI: XSDT > 6F6FE120, 0064 (r1 > >>> INTEL > >>> > THRLY > >>> > > > 0 > >>> > > > > > 1000013) > >>> > > > > > > (XEN) ACPI: FACP > 6F6FD000, 00F4 (r4 > >>> INTEL > >>> > THRLY > >>> > > > 0 > >>> > > > > MSFT > >>> > > > > > 100000D) > >>> > > > > > > (XEN) ACPI: DSDT > 6F6F5000, 74F1 (r2 > >>> INTEL > >>> > THRLY > >>> > > > 3 > >>> > > > > MSFT > >>> > > > > > 100000D) > >>> > > > > > > (XEN) ACPI: FACS > 6F5F9000, 0040 > >>> > > > > > > (XEN) ACPI: APIC > 6F6F4000, 01CC (r2 > >>> INTEL > >>> > THRLY > >>> > > > 0 > >>> > > > > MSFT > >>> > > > > > 100000D) > >>> > > > > > > (XEN) ACPI: MCFG > 6F6F3000, 003C (r1 > >>> INTEL > >>> > THRLY > >>> > > > 1 > >>> > > > > MSFT > >>> > > > > > 100000D) > >>> > > > > > > (XEN) ACPI: HPET > 6F6F2000, 0038 (r1 > >>> INTEL > >>> > THRLY > >>> > > > 1 > >>> > > > > MSFT > >>> > > > > > 100000D) > >>> > > > > > > (XEN) ACPI: SLIT > 6F6F1000, 0030 (r1 > >>> INTEL > >>> > THRLY > >>> > > > 1 > >>> > > > > MSFT > >>> > > > > > 100000D) > >>> > > > > > > (XEN) ACPI: WDDT > 6F6F0000, 0040 (r1 > >>> INTEL > >>> > THRLY > >>> > > > 0 > >>> > > > > MSFT > >>> > > > > > 100000D) > >>> > > > > > > (XEN) ACPI: SSDT > 6F5D9000, 1FDDC > >>> (r1 > >>> > INTEL SSDT > >>> > > PM > >>> > > > 4000 > >>> > > > > INTL > >>> > > > > > 20061109) > >>> > > > > > > (XEN) ACPI: DMAR > 6F6EE000, 01D0 (r1 > >>> INTEL > >>> > THRLY > >>> > > > 1 > >>> > > > > MSFT > >>> > > > > > 100000D) > >>> > > > > > > (XEN) Domain heap > initialised > >>> > > > > > > (XEN) Processor #0 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #2 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #4 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #16 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #18 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #20 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #1 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #3 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #5 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #17 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #19 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #21 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) IOAPIC[0]: > apic_id 8, version > >>> 32, > >>> > address > >>> > > > 0xfec00000, GSI > >>> > > > > 0-23 > >>> > > > > > > (XEN) IOAPIC[1]: > apic_id 9, version > >>> 32, > >>> > address > >>> > > > 0xfec90000, GSI > >>> > > > > 24-47 > >>> > > > > > > (XEN) Enabling APIC > mode: Phys. > >>> Using 2 > >>> > I/O > >>> > > APICs > >>> > > > > > > (XEN) Intel VT-d DMAR > tables have > >>> been > >>> > parsed. > >>> > > > > > > (XEN) Using scheduler: > SMP Credit > >>> > Scheduler > >>> > > (credit) > >>> > > > > > > (XEN) Detected > 3200.207 MHz > >>> processor. > >>> > > > > > > (XEN) VMX: Supported > advanced > >>> features: > >>> > > > > > > (XEN) - APIC MMIO > access > >>> virtualisation > >>> > > > > > > (XEN) - APIC TPR > shadow > >>> > > > > > > (XEN) - Extended Page > Tables (EPT) > >>> > > > > > > (XEN) - > Virtual-Processor > >>> Identifiers > >>> > (VPID) > >>> > > > > > > (XEN) - Virtual NMI > >>> > > > > > > (XEN) - MSR > direct-access bitmap > >>> > > > > > > (XEN) VMX: EPT is > available. > >>> > > > > > > (XEN) VMX: VPID is > available. > >>> > > > > > > (XEN) HVM: VMX enabled > >>> > > > > > > (XEN) HVM: Hardware > Assisted Paging > >>> > detected. > >>> > > > > > > (XEN) CPU0: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 1/2 eip > >>> 88000 > >>> > > > > > > (XEN) CPU1: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 2/4 eip > >>> 88000 > >>> > > > > > > (XEN) CPU2: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 3/16 eip > >>> 88000 > >>> > > > > > > (XEN) CPU3: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 4/18 eip > >>> 88000 > >>> > > > > > > (XEN) CPU4: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 5/20 eip > >>> 88000 > >>> > > > > > > (XEN) CPU5: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 6/1 eip > >>> 88000 > >>> > > > > > > (XEN) CPU6: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 7/3 eip > >>> 88000 > >>> > > > > > > (XEN) CPU7: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 8/5 eip > >>> 88000 > >>> > > > > > > (XEN) CPU8: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 9/17 eip > >>> 88000 > >>> > > > > > > (XEN) CPU9: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 10/19 eip > >>> 88000 > >>> > > > > > > (XEN) CPU10: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 11/21 eip > >>> 88000 > >>> > > > > > > (XEN) CPU11: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Total of 12 > processors > >>> activated. > >>> > > > > > > (XEN) ENABLING IO-APIC > IRQs > >>> > > > > > > (XEN) -> Using new > ACK method > >>> > > > > > > (XEN) checking TSC > synchronization > >>> across > >>> > 12 > >>> > > CPUs: > >>> > > > passed. > >>> > > > > > > (XEN) Platform timer > is 14.318MHz > >>> HPET > >>> > > > > > > ?(XEN) Brought up 12 > CPUs > >>> > > > > > > (XEN) Intel VT-d Snoop > Control > >>> supported. > >>> > > > > > > (XEN) Intel VT-d DMA > Passthrough > >>> not > >>> > supported. > >>> > > > > > > (XEN) Intel VT-d > Queued > >>> Invalidation > >>> > supported. > >>> > > > > > > (XEN) Intel VT-d > Interrupt > >>> Remapping > >>> > supported. > >>> > > > > > > (XEN) I/O > virtualisation enabled > >>> > > > > > > (XEN) I/O > virtualisation for PV > >>> guests > >>> > disabled > >>> > > > > > > (XEN) xenoprof: > Initialization > >>> failed. > >>> > Intel > >>> > > processor > >>> > > > model 44 > >>> > > > > for P6 > >>> > > > > > class family is not > supported > >>> > > > > > > (XEN) *** LOADING > DOMAIN 0 *** > >>> > > > > > > (XEN) Xen kernel: > 64-bit, lsb, > >>> compat32 > >>> > > > > > > (XEN) Dom0 kernel: > 64-bit, PAE, > >>> lsb, > >>> > paddr > >>> > > 0x1000000 -> > >>> > > > > 0x26bb000 > >>> > > > > > > (XEN) PHYSICAL MEMORY > ARRANGEMENT: > >>> > > > > > > (XEN) Dom0 alloc.: > >>> > > 0000000064000000->0000000068000000 > >>> > > > > (404490 pages > >>> > > > > > to be allocated) > >>> > > > > > > (XEN) VIRTUAL MEMORY > ARRANGEMENT: > >>> > > > > > > (XEN) Loaded kernel: > >>> > > ffffffff81000000->ffffffff826bb000 > >>> > > > > > > (XEN) Init. ramdisk: > >>> > > ffffffff826bb000->ffffffff82d0d800 > >>> > > > > > > (XEN) Phys-Mach map: > >>> > > ffffffff82d0e000->ffffffff83044050 > >>> > > > > > > (XEN) Start info: > >>> > > ffffffff83045000->ffffffff830454b4 > >>> > > > > > > (XEN) Page tables: > >>> > > ffffffff83046000->ffffffff83063000 > >>> > > > > > > (XEN) Boot stack: > >>> > > ffffffff83063000->ffffffff83064000 > >>> > > > > > > (XEN) TOTAL: > >>> > > ffffffff80000000->ffffffff83400000 > >>> > > > > > > (XEN) ENTRY ADDRESS: > >>> ffffffff819c1200 > >>> > > > > > > (XEN) Dom0 has maximum > 12 VCPUs > >>> > > > > > > (XEN) Scrubbing Free > RAM: .done. > >>> > > > > > > (XEN) Xen trace > buffers: disabled > >>> > > > > > > (XEN) Std. Loglevel: > Errors and > >>> warnings > >>> > > > > > > (XEN) Guest Loglevel: > Nothing > >>> > (Rate-limited: > >>> > > Errors and > >>> > > > > warnings) > >>> > > > > > > (XEN) Xen is > relinquishing VGA > >>> console. > >>> > > > > > > (XEN) *** Serial input > -> DOM0 > >>> (type > >>> > 'CTRL-a' > >>> > > three > >>> > > > times to > >>> > > > > switch > >>> > > > > > input to Xen) > >>> > > > > > > (XEN) Freed 128kB init > memory. > >>> > > > > > > mapping kernel into > physical memory > >>> > > > > > > Xen: setup ISA > identity maps > >>> > > > > > > about to get > started... > >>> > > > > > > Initializing cgroup > subsys cpuset > >>> > > > > > > Initializing cgroup > subsys cpu > >>> > > > > > > Linux version 2.6.32.9 > >>> > > (kishore@localhost.localdomain) > >>> > > > (gcc > >>> > > > > version > >>> > > > > > 4.1.2 20080704 (Red Hat > 4.1.2-46)) #1 > >>> SMP > >>> > Mon Mar > >>> > > 15 > >>> > > > 15:16:28 PDT > >>> > > > > 2010 > >>> > > > > > > Command line: ro > >>> > root=/dev/VolGroup01/LogVol00 > >>> > > > console=hvc0 > >>> > > > > > earlyprintk=xen nomodeset > >>> > > > > > > KERNEL supported cpus: > >>> > > > > > > Intel GenuineIntel > >>> > > > > > > AMD AuthenticAMD > >>> > > > > > > Centaur CentaurHauls > >>> > > > > > > BIOS-provided physical > RAM map: > >>> > > > > > > Xen: 0000000000000000 > - > >>> 000000000009d000 > >>> > > (usable) > >>> > > > > > > Xen: 000000000009d000 > - > >>> 0000000000100000 > >>> > > (reserved) > >>> > > > > > > Xen: 0000000000100000 > - > >>> 0000000066c0a000 > >>> > > (usable) > >>> > > > > > > Xen: 000000006d597000 > - > >>> 000000006d686000 > >>> > > (reserved) > >>> > > > > > > Xen: 000000006f598000 > - > >>> 000000006f59a000 > >>> > > (reserved) > >>> > > > > > > Xen: 000000006f59a000 > - > >>> 000000006f5af000 > >>> > (ACPI > >>> > > NVS) > >>> > > > > > > Xen: 000000006f5af000 > - > >>> 000000006f5d9000 > >>> > > (reserved) > >>> > > > > > > Xen: 000000006f5d9000 > - > >>> 000000006f5f9000 > >>> > (ACPI > >>> > > data) > >>> > > > > > > Xen: 000000006f5f9000 > - > >>> 000000006f6df000 > >>> > (ACPI > >>> > > NVS) > >>> > > > > > > Xen: 000000006f6df000 > - > >>> 000000006f700000 > >>> > (ACPI > >>> > > data) > >>> > > > > > > Xen: 000000006f700000 > - > >>> 0000000080000000 > >>> > > (reserved) > >>> > > > > > > Xen: 00000000a0000000 > - > >>> 00000000b0000000 > >>> > > (reserved) > >>> > > > > > > Xen: 00000000fc000000 > - > >>> 00000000fd000000 > >>> > > (reserved) > >>> > > > > > > Xen: 00000000fed1c000 > - > >>> 00000000fed20000 > >>> > > (reserved) > >>> > > > > > > Xen: 00000000ffc00000 > - > >>> 0000000100000000 > >>> > > (reserved) > >>> > > > > > > bootconsole [xenboot0] > enabled > >>> > > > > > > DMI 2.4 present. > >>> > > > > > > last_pfn = 0x66c0a > max_arch_pfn = > >>> > 0x400000000 > >>> > > > > > > init_memory_mapping: > >>> > > 0000000000000000-0000000066c0a000 > >>> > > > > > > RAMDISK: 026bb000 - > 02d0d800 > >>> > > > > > > ACPI: RSDP > 00000000000f03f0 00024 > >>> (v02 > >>> > INTEL ) > >>> > > > > > > ACPI: XSDT > 000000006f6fe120 00064 > >>> (v01 > >>> > INTEL > >>> > > THRLY > >>> > > > 00000000 > >>> > > > > > 01000013) > >>> > > > > > > ACPI: FACP > 000000006f6fd000 000F4 > >>> (v04 > >>> > INTEL > >>> > > THRLY > >>> > > > 00000000 > >>> > > > > MSFT > >>> > > > > > 0100000D) > >>> > > > > > > ACPI: DSDT > 000000006f6f5000 074F1 > >>> (v02 > >>> > INTEL > >>> > > THRLY > >>> > > > 00000003 > >>> > > > > MSFT > >>> > > > > > 0100000D) > >>> > > > > > > ACPI: FACS > 000000006f5f9000 00040 > >>> > > > > > > ACPI: APIC > 000000006f6f4000 001CC > >>> (v02 > >>> > INTEL > >>> > > THRLY > >>> > > > 00000000 > >>> > > > > MSFT > >>> > > > > > 0100000D) > >>> > > > > > > ACPI: MCFG > 000000006f6f3000 0003C > >>> (v01 > >>> > INTEL > >>> > > THRLY > >>> > > > 00000001 > >>> > > > > MSFT > >>> > > > > > 0100000D) > >>> > > > > > > ACPI: HPET > 000000006f6f2000 00038 > >>> (v01 > >>> > INTEL > >>> > > THRLY > >>> > > > 00000001 > >>> > > > > MSFT > >>> > > > > > 0100000D) > >>> > > > > > > ACPI: SLIT > 000000006f6f1000 00030 > >>> (v01 > >>> > INTEL > >>> > > THRLY > >>> > > > 00000001 > >>> > > > > MSFT > >>> > > > > > 0100000D) > >>> > > > > > > ACPI: WDDT > 000000006f6f0000 00040 > >>> (v01 > >>> > INTEL > >>> > > THRLY > >>> > > > 00000000 > >>> > > > > MSFT > >>> > > > > > 0100000D) > >>> > > > > > > ACPI: SSDT > 000000006f5d9000 1FDDC > >>> (v01 > >>> > INTEL > >>> > > SSDT PM > >>> > > > 00004000 > >>> > > > > INTL > >>> > > > > > 20061109) > >>> > > > > > > ACPI: > 000000006f6ee000 001D0 > >>> (v01 > >>> > INTEL > >>> > > THRLY > >>> > > > 00000001 > >>> > > > > MSFT > >>> > > > > > 0100000D) > >>> > > > > > > No NUMA configuration > found > >>> > > > > > > Faking a node at > >>> > > 0000000000000000-0000000066c0a000 > >>> > > > > > > Bootmem setup node 0 > >>> > > 0000000000000000-0000000066c0a000 > >>> > > > > > > NODE_DATA > [0000000000008000 - > >>> > 000000000001ffff] > >>> > > > > > > bootmap > [0000000000020000 - > >>> > 000000000002cd87] > >>> > > pages d > >>> > > > > > > (9 early reservations) > ==> bootmem > >>> > [0000000000 - > >>> > > > 0066c0a000] > >>> > > > > > > #0 [0000000000 - > 0000001000] > >>> BIOS data > >>> > page > >>> > > ==> > >>> > > > [0000000000 > >>> > > > > - > >>> > > > > > 0000001000] > >>> > > > > > > #1 [0003046000 - > 0003063000] > >>> XEN > >>> > PAGETABLES > >>> > > ==> > >>> > > > [0003046000 > >>> > > > > - > >>> > > > > > 0003063000] > >>> > > > > > > #2 [0000006000 - > 0000008000] > >>> > TRAMPOLINE > >>> > > ==> > >>> > > > [0000006000 > >>> > > > > - > >>> > > > > > 0000008000] > >>> > > > > > > #3 [0001000000 - > 000269ae98] > >>> TEXT > >>> > DATA BSS > >>> > > ==> > >>> > > > [0001000000 > >>> > > > > - > >>> > > > > > 000269ae98] > >>> > > > > > > #4 [00026bb000 - > 0002d0d800] > >>> > RAMDISK > >>> > > ==> > >>> > > > [00026bb000 > >>> > > > > - > >>> > > > > > 0002d0d800] > >>> > > > > > > #5 [0002d0e000 - > 0003046000] > >>> XEN START > >>> > INFO > >>> > > ==> > >>> > > > [0002d0e000 > >>> > > > > - > >>> > > > > > 0003046000] > >>> > > > > > > #6 [000269b000 - > 000269b011] > >>> > BRK > >>> > > ==> > >>> > > > [000269b000 > >>> > > > > - > >>> > > > > > 000269b011] > >>> > > > > > > #7 [0000100000 - > 000041a000] > >>> > PGTABLE > >>> > > ==> > >>> > > > [0000100000 > >>> > > > > - > >>> > > > > > 000041a000] > >>> > > > > > > #8 [0000001000 - > 0000001030] > >>> ACPI > >>> > SLIT > >>> > > ==> > >>> > > > [0000001000 > >>> > > > > - > >>> > > > > > 0000001030] > >>> > > > > > > found SMP MP-table at > >>> [ffff8800000fd750] > >>> > fd750 > >>> > > > > > > Zone PFN ranges: > >>> > > > > > > DMA 0x00000000 > -> 0x00001000 > >>> > > > > > > DMA32 0x00001000 > -> 0x00100000 > >>> > > > > > > Normal 0x00100000 > -> 0x00100000 > >>> > > > > > > Movable zone start PFN > for each > >>> node > >>> > > > > > > early_node_map[2] > active PFN ranges > >>> > > > > > > 0: 0x00000000 -> > 0x0000009d > >>> > > > > > > 0: 0x00000100 -> > 0x00066c0a > >>> > > > > > > ACPI: PM-Timer IO > Port: 0x408 > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x00] > >>> lapic_id[0x00] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x01] > >>> lapic_id[0x02] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x02] > >>> lapic_id[0x04] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x03] > >>> lapic_id[0x10] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x04] > >>> lapic_id[0x12] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x05] > >>> lapic_id[0x14] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x06] > >>> lapic_id[0x01] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x07] > >>> lapic_id[0x03] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x08] > >>> lapic_id[0x05] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x09] > >>> lapic_id[0x11] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x0a] > >>> lapic_id[0x13] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x0b] > >>> lapic_id[0x15] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x0c] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x0d] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x0e] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x0f] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x10] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x11] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x12] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x13] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x14] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x15] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x16] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x17] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x00] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x01] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x02] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x03] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x04] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x05] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x06] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x07] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x08] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x09] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x0a] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x0b] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x0c] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x0d] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x0e] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x0f] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x10] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x11] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x12] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x13] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x14] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x15] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x16] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x17] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: IOAPIC (id[0x08] > >>> address[0xfec00000] > >>> > > gsi_base[0]) > >>> > > > > > > IOAPIC[0]: apic_id 8, > version 0, > >>> address > >>> > > 0xfec00000, GSI > >>> > > > 0-0 > >>> > > > > > > ACPI: IOAPIC (id[0x09] > >>> address[0xfec90000] > >>> > > gsi_base[24]) > >>> > > > > > > IOAPIC[1]: apic_id 9, > version 0, > >>> address > >>> > > 0xfec90000, GSI > >>> > > > 24-24 > >>> > > > > > > ACPI: INT_SRC_OVR (bus > 0 bus_irq 0 > >>> > global_irq 2 > >>> > > dfl dfl) > >>> > > > > > > ERROR: Unable to > locate IOAPIC for > >>> GSI 2 > >>> > > > > > > ACPI: INT_SRC_OVR (bus > 0 bus_irq 9 > >>> > global_irq 9 > >>> > > high > >>> > > > level) > >>> > > > > > > ERROR: Unable to > locate IOAPIC for > >>> GSI 9 > >>> > > > > > > Using ACPI (MADT) for > SMP > >>> configuration > >>> > > information > >>> > > > > > > ACPI: HPET id: > 0x8086a401 base: > >>> 0xfed00000 > >>> > > > > > > SMP: Allowing 12 CPUs, > 0 hotplug > >>> CPUs > >>> > > > > > > PM: Registered nosave > memory: > >>> > 000000000009d000 - > >>> > > > > 0000000000100000 > >>> > > > > > > Allocating PCI > resources starting > >>> at > >>> > b0000000 > >>> > > (gap: > >>> > > > > b0000000:4c000000) > >>> > > > > > > Booting > paravirtualized kernel on > >>> Xen > >>> > > > > > > Xen version: > 3.4.3-rc4-pre > >>> (preserve-AD) > >>> > (dom0) > >>> > > > > > > NR_CPUS:512 > nr_cpumask_bits:512 > >>> > nr_cpu_ids:12 > >>> > > > nr_node_ids:1 > >>> > > > > > > PERCPU: Embedded 478 > pages/cpu > >>> > @ffff880005ebc000 > >>> > > > s1928024 r8192 > >>> > > > > d21672 > >>> > > > > > u1957888 > >>> > > > > > > pcpu-alloc: s1928024 > r8192 d21672 > >>> u1957888 > >>> > > > alloc=478*4096 > >>> > > > > > > pcpu-alloc: [0] 00 [0] > 01 [0] 02 > >>> [0] 03 > >>> > [0] 04 > >>> > > [0] 05 > >>> > > > [0] 06 > >>> > > > > [0] 07 > >>> > > > > > > pcpu-alloc: [0] 08 [0] > 09 [0] 10 > >>> [0] 11 > >>> > > > > > > Xen: using vcpu_info > placement > >>> > > > > > > Built 1 zonelists in > Node order, > >>> mobility > >>> > > grouping on. > >>> > > > Total > >>> > > > > pages: > >>> > > > > > 409291 > >>> > > > > > > Policy zone: DMA32 > >>> > > > > > > Kernel command line: > ro > >>> > > root=/dev/VolGroup01/LogVol00 > >>> > > > > console=hvc0 > >>> > > > > > earlyprintk=xen nomodeset > >>> > > > > > > PID hash table > entries: 4096 > >>> (order: 3, > >>> > 32768 > >>> > > bytes) > >>> > > > > > > Initializing CPU#0 > >>> > > > > > > DMA: Placing 64MB > software IO TLB > >>> between > >>> > > > ffff880007525000 - > >>> > > > > > ffff88000b525000 > >>> > > > > > > DMA: software IO TLB > at phys > >>> 0x7525000 - > >>> > > 0xb525000 > >>> > > > > > > xen_swiotlb_fixup: > >>> buf=ffff880007525000 > >>> > > size=67108864 > >>> > > > > > > xen_swiotlb_fixup: > >>> buf=ffff88000b585000 > >>> > > size=32768 > >>> > > > > > > Memory: > 1514268k/1683496k available > >>> (4654k > >>> > kernel > >>> > > code, > >>> > > > 396k > >>> > > > > absent, > >>> > > > > > 168832k reserved, 3443k > data, 3396k > >>> init) > >>> > > > > > > SLUB: Genslabs=14, > HWalign=64, > >>> Order=0-3, > >>> > > MinObjects=0, > >>> > > > > CPUs=12, > >>> > > > > > Nodes=1 > >>> > > > > > > Hierarchical RCU > implementation. > >>> > > > > > > NR_IRQS:4352 > nr_irqs:3072 > >>> > > > > > > Already setup the GSI > :0 > >>> > > > > > > Already setup the GSI > :1 > >>> > > > > > > Already setup the GSI > :2 > >>> > > > > > > Already setup the GSI > :3 > >>> > > > > > > Already setup the GSI > :4 > >>> > > > > > > Already setup the GSI > :5 > >>> > > > > > > Already setup the GSI > :6 > >>> > > > > > > Already setup the GSI > :7 > >>> > > > > > > Already setup the GSI > :8 > >>> > > > > > > Already setup the GSI > :9 > >>> > > > > > > Already setup the GSI > :10 > >>> > > > > > > Already setup the GSI > :11 > >>> > > > > > > Already setup the GSI > :12 > >>> > > > > > > Already setup the GSI > :13 > >>> > > > > > > Already setup the GSI > :14 > >>> > > > > > > Already setup the GSI > :15 > >>> > > > > > > ACPI: INT_SRC_OVR (bus > 0 bus_irq 0 > >>> > global_irq 2 > >>> > > dfl dfl) > >>> > > > > > > ACPI: INT_SRC_OVR (bus > 0 bus_irq 9 > >>> > global_irq 9 > >>> > > high > >>> > > > level) > >>> > > > > > > xen: sci override: > source_irq=9 > >>> > global_irq=9 > >>> > > trigger=c > >>> > > > > polarity=1 > >>> > > > > > > xen_allocate_pirq: > returning irq 9 > >>> for gsi > >>> > 9 > >>> > > > > > > Already setup the GSI > :9 > >>> > > > > > > xen: acpi sci 9 > >>> > > > > > > Console: colour VGA+ > 80x25 > >>> > > > > > > console [hvc0] > enabled, bootconsole > >>> > disabled > >>> > > console > >>> > > > [hvc0] > >>> > > > > enabled, > >>> > > > > > bootconsole disabled > >>> > > > > > > Lock dependency > validator: > >>> Copyright (c) > >>> > 2006 Red > >>> > > Hat, > >>> > > > Inc., > >>> > > > > Ingo > >>> > > > > > Molnar ... > MAX_LOCKDEP_SUBCLASSES: 8 > >>> ... > >>> > > MAX_LOCK_DEPTH: > >>> > > > > 48 > >>> > > > > > ... MAX_LOCKDEP_KEYS: > 8191 ... > >>> > > CLASSHASH_SIZE: > >>> > > > > 4096 ... > >>> > > > > > MAX_LOCKDEP_ENTRIES: > 16384 ... > >>> > > MAX_LOCKDEP_CHAINS: > >>> > > > 32768 > >>> > > > > ... > >>> > > > > > CHAINHASH_SIZE: > 16384 > >>> memory used > >>> > by lock > >>> > > > dependency > >>> > > > > info: > >>> > > > > > 6367 kB per task-struct > memory > >>> footprint: > >>> > 2688 > >>> > > bytes > >>> > > > allocated > >>> > > > > 17039360 > >>> > > > > > bytes of page_cgroup > please try > >>> > > 'cgroup_disable=memory' > >>> > > > option if > >>> > > > > you > >>> > > > > > don't want memory cgroups > installing > >>> Xen > >>> > timer for > >>> > > CPU 0 > >>> > > > Detected > >>> > > > > > 3200.206 MHz processor. > Calibrating > >>> delay > >>> > loop > >>> > > (skipped), > >>> > > > value > >>> > > > > > calculated using timer > frequency.. > >>> 6400.41 > >>> > BogoMIPS > >>> > > > (lpj=3200206) > >>> > > > > > Security Framework > initialized > >>> SELinux: > >>> > > Initializing. > >>> > > > Dentry > >>> > > > > cache hash > >>> > > > > > table entries: 262144 > (order: 9, > >>> 2097152 > >>> > bytes) > >>> > > > Inode-cache hash > >>> > > > > table > >>> > > > > > entries: 131072 (order: > 8, 1048576 > >>> bytes) > >>> > > Mount-cache hash > >>> > > > table > >>> > > > > > entries: 256 Initializing > cgroup > >>> subsys ns > >>> > > Initializing > >>> > > > cgroup > >>> > > > > subsys > >>> > > > > > cpuacct Initializing > cgroup subsys > >>> memory > >>> > > Initializing > >>> > > > cgroup > >>> > > > > subsys > >>> > > > > > devices Initializing > cgroup subsys > >>> freezer > >>> > > Initializing > >>> > > > cgroup > >>> > > > > subsys > >>> > > > > > net_cls CPU: L1 I cache: > 32K, L1 D > >>> cache: > >>> > 32K CPU: > >>> > > L2 > >>> > > > cache: 256K > >>> > > > > CPU: > >>> > > > > > L3 cache: 12288K CPU > 0/0x0 -> Node 0 > >>> CPU: > >>> > > Unsupported > >>> > > > number of > >>> > > > > siblings > >>> > > > > > 32 Performance Events: > unsupported p6 > >>> CPU > >>> > model 44 > >>> > > no PMU > >>> > > > driver, > >>> > > > > > software events only. > lockdep: fixing > >>> up > >>> > > alternatives. SMP > >>> > > > > alternatives: > >>> > > > > > switching to UP code > ACPI: Core > >>> revision > >>> > 20090903 > >>> > > ftrace: > >>> > > > > converting > >>> > > > > > mcount calls to 0f 1f 44 > 00 00 > >>> ftrace: > >>> > allocating > >>> > > 27971 > >>> > > > entries > >>> > > > > in 110 > >>> > > > > > pages installing Xen > timer for CPU 1 > >>> > lockdep: > >>> > > fixing up > >>> > > > > alternatives. > >>> > > > > > SMP alternatives: > switching to SMP > >>> code > >>> > > Initializing CPU#1 > >>> > > > CPU: > >>> > > > > L1 I > >>> > > > > > cache: 32K, L1 D cache: > 32K CPU: L2 > >>> cache: > >>> > 256K > >>> > > CPU: L3 > >>> > > > cache: > >>> > > > > 12288K > >>> > > > > > CPU 1/0x0 -> Node 0 CPU: > Unsupported > >>> number > >>> > of > >>> > > siblings 32 > >>> > > > > installing > >>> > > > > > Xen timer for CPU 2 > Initializing > >>> CPU#2 CPU: > >>> > L1 I > >>> > > cache: > >>> > > > 32K, L1 D > >>> > > > > cache: > >>> > > > > > 32K CPU: L2 cache: 256K > CPU: L3 > >>> cache: > >>> > 12288K CPU > >>> > > 2/0x0 -> > >>> > > > Node 0 > >>> > > > > CPU: > >>> > > > > > Unsupported number of > siblings 32 > >>> installing > >>> > Xen > >>> > > timer for > >>> > > > CPU 3 > >>> > > > > > Initializing CPU#3 CPU: > L1 I cache: > >>> 32K, L1 > >>> > D > >>> > > cache: 32K > >>> > > > CPU: L2 > >>> > > > > cache: > >>> > > > > > 256K CPU: L3 cache: > 12288K CPU 3/0x0 > >>> -> Node > >>> > 0 CPU: > >>> > > > Unsupported > >>> > > > > number > >>> > > > > > of siblings 32 installing > Xen timer > >>> for CPU > >>> > 4 > >>> > > Initializing > >>> > > > CPU#4 > >>> > > > > CPU: L1 > >>> > > > > > I cache: 32K, L1 D cache: > 32K CPU: L2 > >>> cache: > >>> > 256K > >>> > > CPU: L3 > >>> > > > cache: > >>> > > > > 12288K > >>> > > > > > CPU 4/0x0 -> Node 0 CPU: > Unsupported > >>> number > >>> > of > >>> > > siblings 32 > >>> > > > > installing > >>> > > > > > Xen timer for CPU 5 > Initializing > >>> CPU#5 CPU: > >>> > L1 I > >>> > > cache: > >>> > > > 32K, L1 D > >>> > > > > cache: > >>> > > > > > 32K CPU: L2 cache: 256K > CPU: L3 > >>> cache: > >>> > 12288K CPU > >>> > > 5/0x0 -> > >>> > > > Node 0 > >>> > > > > CPU: > >>> > > > > > Unsupported number of > siblings 32 > >>> installing > >>> > Xen > >>> > > timer for > >>> > > > CPU 6 > >>> > > > > > Initializing CPU#6 CPU: > L1 I cache: > >>> 32K, L1 > >>> > D > >>> > > cache: 32K > >>> > > > CPU: L2 > >>> > > > > cache: > >>> > > > > > 256K CPU: L3 cache: > 12288K CPU 6/0x0 > >>> -> Node > >>> > 0 CPU: > >>> > > > Unsupported > >>> > > > > number > >>> > > > > > of siblings 32 installing > Xen timer > >>> for CPU > >>> > 7 > >>> > > Initializing > >>> > > > CPU#7 > >>> > > > > CPU: L1 > >>> > > > > > I cache: 32K, L1 D cache: > 32K CPU: L2 > >>> cache: > >>> > 256K > >>> > > CPU: L3 > >>> > > > cache: > >>> > > > > 12288K > >>> > > > > > CPU 7/0x0 -> Node 0 CPU: > Unsupported > >>> number > >>> > of > >>> > > siblings 32 > >>> > > > > installing > >>> > > > > > Xen timer for CPU 8 > Initializing > >>> CPU#8 CPU: > >>> > L1 I > >>> > > cache: > >>> > > > 32K, L1 D > >>> > > > > cache: > >>> > > > > > 32K CPU: L2 cache: 256K > CPU: L3 > >>> cache: > >>> > 12288K CPU > >>> > > 8/0x0 -> > >>> > > > Node 0 > >>> > > > > CPU: > >>> > > > > > Unsupported number of > siblings 32 > >>> installing > >>> > Xen > >>> > > timer for > >>> > > > CPU 9 > >>> > > > > > Initializing CPU#9 CPU: > L1 I cache: > >>> 32K, L1 > >>> > D > >>> > > cache: 32K > >>> > > > CPU: L2 > >>> > > > > cache: > >>> > > > > > 256K CPU: L3 cache: > 12288K CPU 9/0x0 > >>> -> Node > >>> > 0 CPU: > >>> > > > Unsupported > >>> > > > > number > >>> > > > > > of siblings 32 installing > Xen timer > >>> for CPU > >>> > 10 > >>> > > > Initializing > >>> > > > > CPU#10 CPU: > >>> > > > > > L1 I cache: 32K, L1 D > cache: 32K CPU: > >>> L2 > >>> > cache: > >>> > > 256K CPU: > >>> > > > L3 > >>> > > > > cache: > >>> > > > > > 12288K CPU 10/0x0 -> > Node 0 CPU: > >>> Unsupported > >>> > number > >>> > > of > >>> > > > siblings > >>> > > > > 32 > >>> > > > > > installing Xen timer for > CPU 11 > >>> Initializing > >>> > CPU#11 > >>> > > CPU: > >>> > > > L1 I > >>> > > > > cache: > >>> > > > > > 32K, L1 D cache: 32K CPU: > L2 cache: > >>> 256K > >>> > CPU: L3 > >>> > > cache: > >>> > > > 12288K > >>> > > > > CPU > >>> > > > > > 11/0x0 -> Node 0 CPU: > Unsupported > >>> number of > >>> > > siblings 32 > >>> > > > Brought > >>> > > > > up 12 > >>> > > > > > CPUs Grant table > initialized > >>> regulator: core > >>> > > version 0.5 > >>> > > > Time: > >>> > > > > 14:45:00 > >>> > > > > > Date: 03/16/10 NET: > Registered > >>> protocol > >>> > family 16 > >>> > > > > xenbus_probe_init ok > >>> > > > > > ACPI FADT declares the > system doesn't > >>> > support PCIe > >>> > > ASPM, > >>> > > > so > >>> > > > > disable it > >>> > > > > > ACPI: bus type pci > registered PCI: > >>> MCFG > >>> > > configuration 0: > >>> > > > base > >>> > > > > a0000000 > >>> > > > > > segment 0 buses 0 - 255 > PCI: MCFG > >>> area at > >>> > a0000000 > >>> > > > reserved in > >>> > > > > E820 PCI: > >>> > > > > > Using MMCONFIG at > a0000000 - afffffff > >>> PCI: > >>> > Using > >>> > > > configuration > >>> > > > > type 1 > >>> > > > > > for base access bio: > create slab > >>> <bio-0> at > >>> > 0 ACPI > >>> > > Error: > >>> > > > Field > >>> > > > > [CPB3] > >>> > > > > > at 96 exceeds Buffer > [NULL] size 64 > >>> (bits) > >>> > > > > (20090903/dsopcode-596) ACPI > >>> > > > > > Error (psparse-0537): > Method > >>> parse/execution > >>> > failed > >>> > > > [\_SB_._OSC] > >>> > > > > (Node > >>> > > > > > ffff880064e00c98), > >>> AE_AML_BUFFER_LIMIT ACPI: > >>> > > Interpreter > >>> > > > enabled > >>> > > > > ACPI: > >>> > > > > > (supports S0 S1 S3 S4 S5) > ACPI: Using > >>> IOAPIC > >>> > for > >>> > > interrupt > >>> > > > > routing ACPI > >>> > > > > > Warning: Incorrect > checksum in table > >>> [ ] > >>> > - 97, > >>> > > should > >>> > > > be DB > >>> > > > > > (20090903/tbutils-314) > ACPI: No dock > >>> devices > >>> > found. > >>> > > ACPI: > >>> > > > PCI > >>> > > > > Root > >>> > > > > > Bridge [PCI0] (0000:00) > pci > >>> 0000:00:01.0: > >>> > PME# > >>> > > supported > >>> > > > from D0 > >>> > > > > D3hot > >>> > > > > > D3cold pci 0000:00:01.0: > PME# > >>> disabled pci > >>> > > 0000:00:02.0: > >>> > > > PME# > >>> > > > > supported > >>> > > > > > from D0 D3hot D3cold pci > >>> 0000:00:02.0: PME# > >>> > > disabled pci > >>> > > > > 0000:00:03.0: > >>> > > > > > PME# supported from D0 > D3hot D3cold > >>> pci > >>> > > 0000:00:03.0: PME# > >>> > > > > disabled pci > >>> > > > > > 0000:00:04.0: PME# > supported from D0 > >>> D3hot > >>> > D3cold > >>> > > pci > >>> > > > > 0000:00:04.0: PME# > >>> > > > > > disabled pci > 0000:00:05.0: PME# > >>> supported > >>> > from D0 > >>> > > D3hot > >>> > > > D3cold > >>> > > > > pci > >>> > > > > > 0000:00:05.0: PME# > disabled pci > >>> > 0000:00:06.0: PME# > >>> > > > supported from > >>> > > > > D0 > >>> > > > > > D3hot D3cold pci > 0000:00:06.0: PME# > >>> disabled > >>> > pci > >>> > > > 0000:00:07.0: > >>> > > > > PME# > >>> > > > > > supported from D0 D3hot > D3cold pci > >>> > 0000:00:07.0: > >>> > > PME# > >>> > > > disabled > >>> > > > > pci > >>> > > > > > 0000:00:08.0: PME# > supported from D0 > >>> D3hot > >>> > D3cold > >>> > > pci > >>> > > > > 0000:00:08.0: PME# > >>> > > > > > disabled pci > 0000:00:09.0: PME# > >>> supported > >>> > from D0 > >>> > > D3hot > >>> > > > D3cold > >>> > > > > pci > >>> > > > > > 0000:00:09.0: PME# > disabled pci > >>> > 0000:00:0a.0: PME# > >>> > > > supported from > >>> > > > > D0 > >>> > > > > > D3hot D3cold pci > 0000:00:0a.0: PME# > >>> disabled > >>> > pci > >>> > > > 0000:00:13.0: > >>> > > > > PME# > >>> > > > > > supported from D0 D3hot > D3cold pci > >>> > 0000:00:13.0: > >>> > > PME# > >>> > > > disabled > >>> > > > > pci > >>> > > > > > 0000:00:1a.7: PME# > supported from D0 > >>> D3hot > >>> > D3cold > >>> > > pci > >>> > > > > 0000:00:1a.7: PME# > >>> > > > > > disabled pci > 0000:00:1c.0: PME# > >>> supported > >>> > from D0 > >>> > > D3hot > >>> > > > D3cold > >>> > > > > pci > >>> > > > > > 0000:00:1c.0: PME# > disabled pci > >>> > 0000:00:1c.4: PME# > >>> > > > supported from > >>> > > > > D0 > >>> > > > > > D3hot D3cold pci > 0000:00:1c.4: PME# > >>> disabled > >>> > pci > >>> > > > 0000:00:1c.5: > >>> > > > > PME# > >>> > > > > > supported from D0 D3hot > D3cold pci > >>> > 0000:00:1c.5: > >>> > > PME# > >>> > > > disabled > >>> > > > > pci > >>> > > > > > 0000:00:1d.7: PME# > supported from D0 > >>> D3hot > >>> > D3cold > >>> > > pci > >>> > > > > 0000:00:1d.7: PME# > >>> > > > > > disabled pci > 0000:00:1f.0: quirk: > >>> region > >>> > 0400-047f > >>> > > claimed > >>> > > > by > >>> > > > > ICH6 > >>> > > > > > ACPI/GPIO/TCO pci > 0000:00:1f.0: > >>> quirk: > >>> > region > >>> > > 0500-053f > >>> > > > claimed > >>> > > > > by ICH6 > >>> > > > > > GPIO pci 0000:00:1f.0: > ICH7 LPC > >>> Generic IO > >>> > decode 1 > >>> > > PIO at > >>> > > > 0680 > >>> > > > > (mask > >>> > > > > > 000f) pci 0000:00:1f.0: > ICH7 LPC > >>> Generic IO > >>> > decode > >>> > > 2 PIO > >>> > > > at 0ca0 > >>> > > > > (mask > >>> > > > > > 000f) pci 0000:00:1f.0: > ICH7 LPC > >>> Generic IO > >>> > decode > >>> > > 3 PIO > >>> > > > at 0600 > >>> > > > > (mask > >>> > > > > > 001f) pci 0000:00:1f.2: > PME# > >>> supported from > >>> > D3hot > >>> > > pci > >>> > > > > 0000:00:1f.2: PME# > >>> > > > > > disabled pci > 0000:01:00.0: PME# > >>> supported > >>> > from D0 > >>> > > D3hot > >>> > > > D3cold > >>> > > > > pci > >>> > > > > > 0000:01:00.0: PME# > disabled pci > >>> > 0000:01:00.1: PME# > >>> > > > supported from > >>> > > > > D0 > >>> > > > > > D3hot D3cold pci > 0000:01:00.1: PME# > >>> disabled > >>> > pci > >>> > > > 0000:0c:00.0: > >>> > > > > disabling > >>> > > > > > ASPM on pre-1.1 PCIe > device. You can > >>> enable > >>> > it > >>> > > with > >>> > > > > 'pcie_aspm=force' > >>> > > > > > pci 0000:00:1e.0: > transparent bridge > >>> ACPI: > >>> > PCI Root > >>> > > Bridge > >>> > > > [PCI1] > >>> > > > > > (0000:fe) ACPI: PCI Root > Bridge > >>> [PCI2] > >>> > (0000:ff) > >>> > > ACPI: PCI > >>> > > > > Interrupt > >>> > > > > > Link [LNKA] (IRQs 3 4 5 6 > 7 9 10 *11 > >>> 12 14 > >>> > 15) > >>> > > ACPI: PCI > >>> > > > > Interrupt Link > >>> > > > > > [LNKB] (IRQs 3 4 5 6 7 9 > *10 11 12 14 > >>> 15) > >>> > ACPI: PCI > >>> > > > Interrupt > >>> > > > > Link > >>> > > > > > [LNKC] (IRQs 3 4 5 6 7 *9 > 10 11 12 14 > >>> 15) > >>> > ACPI: PCI > >>> > > > Interrupt > >>> > > > > Link > >>> > > > > > [LNKD] (IRQs 3 4 *5 6 7 9 > 10 11 12 14 > >>> 15) > >>> > ACPI: PCI > >>> > > > Interrupt > >>> > > > > Link > >>> > > > > > [LNKE] (IRQs 3 4 5 6 7 9 > 10 11 12 14 > >>> 15) *0, > >>> > > disabled. > >>> > > > ACPI: PCI > >>> > > > > > Interrupt Link [LNKF] > (IRQs 3 4 5 6 7 > >>> 9 10 > >>> > *11 12 > >>> > > 14 15) > >>> > > > ACPI: > >>> > > > > PCI > >>> > > > > > Interrupt Link [LNKG] > (IRQs 3 4 5 6 7 > >>> 9 10 > >>> > 11 12 14 > >>> > > 15) > >>> > > > *0, > >>> > > > > disabled. > >>> > > > > > ACPI: PCI Interrupt Link > [LNKH] (IRQs > >>> 3 4 5 > >>> > 6 7 9 > >>> > > *10 11 > >>> > > > 12 14 > >>> > > > > 15) > >>> > > > > > xenbus_probe_backend_init > bus > >>> registered ok > >>> > > > > xenbus_probe_frontend_init > >>> > > > > > bus registered ok > xen_balloon: > >>> Initialising > >>> > balloon > >>> > > driver > >>> > > > with > >>> > > > > page > >>> > > > > > order 0. vgaarb: device > added: > >>> > > > > > > >>> > > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none > >>> > > > vgaarb: > >>> > > > > loaded > >>> > > > > > SCSI subsystem > initialized usbcore: > >>> > registered new > >>> > > > interface > >>> > > > > driver > >>> > > > > > usbfs usbcore: registered > new > >>> interface > >>> > driver hub > >>> > > > usbcore: > >>> > > > > registered > >>> > > > > > new device driver usb > PCI: Using ACPI > >>> for > >>> > IRQ > >>> > > routing > >>> > > > NetLabel: > >>> > > > > > Initializing NetLabel: > domain hash > >>> size = > >>> > 128 > >>> > > NetLabel: > >>> > > > > protocols = > >>> > > > > > UNLABELED CIPSOv4 > NetLabel: > >>> unlabeled > >>> > traffic > >>> > > allowed by > >>> > > > default > >>> > > > > > Switching to clocksource > xen kstop/0 > >>> used > >>> > greatest > >>> > > stack > >>> > > > depth: > >>> > > > > 6568 > >>> > > > > > bytes left kstop/1 used > greatest > >>> stack > >>> > depth: 6536 > >>> > > bytes > >>> > > > left > >>> > > > > pnp: PnP > >>> > > > > > ACPI init ACPI: bus type > pnp > >>> registered > >>> > > xen_allocate_pirq: > >>> > > > > returning irq > >>> > > > > > 8 for gsi 8 Already setup > the GSI :8 > >>> > > xen_allocate_pirq: > >>> > > > returning > >>> > > > > irq 13 > >>> > > > > > for gsi 13 Already setup > the GSI :13 > >>> pnp: > >>> > PnP ACPI: > >>> > > found > >>> > > > 13 > >>> > > > > devices > >>> > > > > > ACPI: ACPI bus type pnp > unregistered > >>> system > >>> > 00:07: > >>> > > ioport > >>> > > > range > >>> > > > > > 0x500-0x53f has been > reserved system > >>> 00:07: > >>> > ioport > >>> > > range > >>> > > > > 0x400-0x47f has > >>> > > > > > been reserved system > 00:07: ioport > >>> range > >>> > > 0x800-0x81f has > >>> > > > been > >>> > > > > reserved > >>> > > > > > system 00:07: ioport > range > >>> 0x2f8-0x2ff has > >>> > been > >>> > > reserved > >>> > > > system > >>> > > > > 00:07: > >>> > > > > > iomem range > 0xfed1c000-0xfed8bffe > >>> could not > >>> > be > >>> > > reserved > >>> > > > system > >>> > > > > 00:07: > >>> > > > > > iomem range > 0xff000000-0xffffffff > >>> could not > >>> > be > >>> > > reserved > >>> > > > system > >>> > > > > 00:07: > >>> > > > > > iomem range > 0xfee00000-0xfeefffff has > >>> been > >>> > reserved > >>> > > system > >>> > > > 00:07: > >>> > > > > iomem > >>> > > > > > range > 0xfe900000-0xfe90001f has been > >>> > reserved > >>> > > system > >>> > > > 00:07: iomem > >>> > > > > range > >>> > > > > > 0xfea00000-0xfea0001f has > been > >>> reserved > >>> > system > >>> > > 00:07: > >>> > > > iomem range > >>> > > > > > 0xfed1b000-0xfed1bfff has > been > >>> reserved pci > >>> > > 0000:0c:00.0: > >>> > > > BAR 6: > >>> > > > > no > >>> > > > > > parent found for of > device > >>> > [0xffff0000-0xffffffff] > >>> > > pci > >>> > > > > 0000:00:01.0: PCI > >>> > > > > > bridge, secondary bus > 0000:01 pci > >>> > 0000:00:01.0: > >>> > > IO > >>> > > > window: > >>> > > > > > 0x1000-0x1fff pci > 0000:00:01.0: MEM > >>> > window: > >>> > > > > 0xb1900000-0xb19fffff pci > >>> > > > > > 0000:00:01.0: PREFETCH > window: > >>> disabled > >>> > pci > >>> > > > 0000:00:02.0: PCI > >>> > > > > bridge, > >>> > > > > > secondary bus 0000:02 pci > >>> 0000:00:02.0: IO > >>> > > window: > >>> > > > disabled pci > >>> > > > > > 0000:00:02.0: MEM > window: disabled > >>> pci > >>> > > 0000:00:02.0: > >>> > > > PREFETCH > >>> > > > > > window: disabled pci > 0000:00:03.0: > >>> PCI > >>> > bridge, > >>> > > secondary > >>> > > > bus > >>> > > > > 0000:03 pci > >>> > > > > > 0000:00:03.0: IO > window: disabled > >>> pci > >>> > > 0000:00:03.0: > >>> > > > MEM > >>> > > > > window: > >>> > > > > > disabled pci > 0000:00:03.0: PREFETCH > >>> > window: > >>> > > disabled pci > >>> > > > > 0000:00:04.0: > >>> > > > > > PCI bridge, secondary bus > 0000:04 pci > >>> > 0000:00:04.0: > >>> > > IO > >>> > > > window: > >>> > > > > > disabled pci > 0000:00:04.0: MEM > >>> window: > >>> > disabled > >>> > > pci > >>> > > > > 0000:00:04.0: > >>> > > > > > PREFETCH window: disabled > pci > >>> 0000:00:05.0: > >>> > PCI > >>> > > bridge, > >>> > > > secondary > >>> > > > > bus > >>> > > > > > 0000:05 pci 0000:00:05.0: > IO > >>> window: > >>> > disabled pci > >>> > > > 0000:00:05.0: > >>> > > > > MEM > >>> > > > > > window: disabled pci > 0000:00:05.0: > >>> > PREFETCH > >>> > > window: > >>> > > > disabled > >>> > > > > pci > >>> > > > > > 0000:00:06.0: PCI bridge, > secondary > >>> bus > >>> > 0000:06 pci > >>> > > > 0000:00:06.0: > >>> > > > > IO > >>> > > > > > window: disabled pci > 0000:00:06.0: > >>> MEM > >>> > window: > >>> > > disabled > >>> > > > pci > >>> > > > > > 0000:00:06.0: PREFETCH > window: > >>> disabled > >>> > pci > >>> > > > 0000:00:07.0: PCI > >>> > > > > bridge, > >>> > > > > > secondary bus 0000:07 pci > >>> 0000:00:07.0: IO > >>> > > window: > >>> > > > disabled pci > >>> > > > > > 0000:00:07.0: MEM > window: disabled > >>> pci > >>> > > 0000:00:07.0: > >>> > > > PREFETCH > >>> > > > > > window: disabled pci > 0000:00:08.0: > >>> PCI > >>> > bridge, > >>> > > secondary > >>> > > > bus > >>> > > > > 0000:08 pci > >>> > > > > > 0000:00:08.0: IO > window: disabled > >>> pci > >>> > > 0000:00:08.0: > >>> > > > MEM > >>> > > > > window: > >>> > > > > > disabled pci > 0000:00:08.0: PREFETCH > >>> > window: > >>> > > disabled pci > >>> > > > > 0000:00:09.0: > >>> > > > > > PCI bridge, secondary bus > 0000:09 pci > >>> > 0000:00:09.0: > >>> > > IO > >>> > > > window: > >>> > > > > > 0x3000-0x3fff pci > 0000:00:09.0: MEM > >>> > window: > >>> > > > > 0xb1b00000-0xb1cfffff pci > >>> > > > > > 0000:00:09.0: PREFETCH > window: > >>> > > > > 0x000000b1d00000-0x000000b1efffff > pci > >>> > > > > > 0000:00:0a.0: PCI bridge, > secondary > >>> bus > >>> > 0000:0a pci > >>> > > > 0000:00:0a.0: > >>> > > > > IO > >>> > > > > > window: disabled pci > 0000:00:0a.0: > >>> MEM > >>> > window: > >>> > > disabled > >>> > > > pci > >>> > > > > > 0000:00:0a.0: PREFETCH > window: > >>> disabled > >>> > pci > >>> > > > 0000:00:1c.0: PCI > >>> > > > > bridge, > >>> > > > > > secondary bus 0000:0b pci > >>> 0000:00:1c.0: IO > >>> > > window: > >>> > > > disabled pci > >>> > > > > > 0000:00:1c.0: MEM > window: disabled > >>> pci > >>> > > 0000:00:1c.0: > >>> > > > PREFETCH > >>> > > > > > window: disabled pci > 0000:00:1c.4: > >>> PCI > >>> > bridge, > >>> > > secondary > >>> > > > bus > >>> > > > > 0000:0c pci > >>> > > > > > 0000:00:1c.4: IO > window: disabled > >>> pci > >>> > > 0000:00:1c.4: > >>> > > > MEM > >>> > > > > window: > >>> > > > > > 0xb1000000-0xb18fffff pci > >>> 0000:00:1c.4: > >>> > PREFETCH > >>> > > window: > >>> > > > > > > 0x000000b0000000-0x000000b0ffffff pci > >>> > 0000:00:1c.5: > >>> > > PCI > >>> > > > bridge, > >>> > > > > > secondary bus 0000:0d pci > >>> 0000:00:1c.5: IO > >>> > > window: > >>> > > > disabled pci > >>> > > > > > 0000:00:1c.5: MEM > window: disabled > >>> pci > >>> > > 0000:00:1c.5: > >>> > > > PREFETCH > >>> > > > > > window: disabled pci > 0000:00:1e.0: > >>> PCI > >>> > bridge, > >>> > > secondary > >>> > > > bus > >>> > > > > 0000:0e pci > >>> > > > > > 0000:00:1e.0: IO > window: disabled > >>> pci > >>> > > 0000:00:1e.0: > >>> > > > MEM > >>> > > > > window: > >>> > > > > > disabled pci > 0000:00:1e.0: PREFETCH > >>> > window: > >>> > > disabled pci > >>> > > > > 0000:00:01.0: > >>> > > > > > PCI INT A -> GSI 28 > (level, low) -> > >>> IRQ 28 > >>> > pci > >>> > > > 0000:00:02.0: PCI > >>> > > > > INT A > >>> > > > > > -> GSI 29 (level, low) > -> IRQ 29 pci > >>> > 0000:00:03.0: > >>> > > PCI INT > >>> > > > A -> > >>> > > > > GSI 24 > >>> > > > > > (level, low) -> IRQ 24 > pci > >>> 0000:00:04.0: PCI > >>> > INT A > >>> > > -> GSI > >>> > > > 25 > >>> > > > > (level, > >>> > > > > > low) -> IRQ 25 pci > 0000:00:05.0: PCI > >>> INT A > >>> > -> GSI > >>> > > 26 > >>> > > > (level, low) > >>> > > > > -> IRQ > >>> > > > > > 26 pci 0000:00:06.0: PCI > INT A -> GSI > >>> 27 > >>> > (level, > >>> > > low) -> > >>> > > > IRQ 27 > >>> > > > > pci > >>> > > > > > 0000:00:07.0: PCI INT A > -> GSI 30 > >>> (level, > >>> > low) -> > >>> > > IRQ 30 > >>> > > > pci > >>> > > > > > 0000:00:08.0: PCI INT A > -> GSI 31 > >>> (level, > >>> > low) -> > >>> > > IRQ 31 > >>> > > > pci > >>> > > > > > 0000:00:09.0: PCI INT A > -> GSI 32 > >>> (level, > >>> > low) -> > >>> > > IRQ 32 > >>> > > > pci > >>> > > > > > 0000:00:0a.0: PCI INT A > -> GSI 33 > >>> (level, > >>> > low) -> > >>> > > IRQ 33 > >>> > > > pci > >>> > > > > > 0000:00:1c.0: PCI INT A > -> GSI 16 > >>> (level, > >>> > low) -> > >>> > > IRQ 16 > >>> > > > > > xen_allocate_pirq: > returning irq 16 > >>> for gsi > >>> > 16 > >>> > > Already > >>> > > > setup the > >>> > > > > GSI :16 > >>> > > > > > pci 0000:00:1c.4: PCI INT > A -> GSI 16 > >>> > (level, low) > >>> > > -> IRQ > >>> > > > 16 pci > >>> > > > > > 0000:00:1c.5: PCI INT B > -> GSI 17 > >>> (level, > >>> > low) -> > >>> > > IRQ 17 > >>> > > > NET: > >>> > > > > Registered > >>> > > > > > protocol family 2 IP > route cache hash > >>> table > >>> > > entries: 65536 > >>> > > > > (order: 7, > >>> > > > > > 524288 bytes) TCP > established hash > >>> table > >>> > entries: > >>> > > 262144 > >>> > > > (order: > >>> > > > > 10, > >>> > > > > > 4194304 bytes) TCP bind > hash table > >>> entries: > >>> > 65536 > >>> > > (order: > >>> > > > 10, > >>> > > > > 4718592 > >>> > > > > > bytes) TCP: Hash tables > configured > >>> > (established > >>> > > 262144 > >>> > > > bind > >>> > > > > 65536) TCP > >>> > > > > > reno registered NET: > Registered > >>> protocol > >>> > family 1 > >>> > > pci > >>> > > > > 0000:01:00.0: > >>> > > > > > Disabling L0s pci > 0000:01:00.1: > >>> Disabling > >>> > L0s > >>> > > Trying to > >>> > > > unpack > >>> > > > > rootfs > >>> > > > > > image as initramfs... > Freeing initrd > >>> memory: > >>> > 6474k > >>> > > freed > >>> > > > DMA-API: > >>> > > > > > preallocated 32768 debug > entries > >>> DMA-API: > >>> > debugging > >>> > > > enabled by > >>> > > > > kernel > >>> > > > > > config PCI-DMA: Using > software bounce > >>> > buffering for > >>> > > IO > >>> > > > (SWIOTLB) > >>> > > > > DMA: > >>> > > > > > Placing 64MB software IO > TLB between > >>> > > ffff880007525000 - > >>> > > > > ffff88000b525000 > >>> > > > > > DMA: software IO TLB at > phys > >>> 0x7525000 - > >>> > 0xb525000 > >>> > > audit: > >>> > > > > initializing > >>> > > > > > netlink socket (disabled) > type=2000 > >>> > > > audit(1268750702.035:1): > >>> > > > > initialized > >>> > > > > > HugeTLB registered 2 MB > page size, > >>> > pre-allocated 0 > >>> > > pages > >>> > > > VFS: > >>> > > > > Disk > >>> > > > > > quotas dquot_6.5.2 > Dquot-cache hash > >>> table > >>> > entries: > >>> > > 512 > >>> > > > (order 0, > >>> > > > > 4096 > >>> > > > > > bytes) msgmni has been > set to 2970 > >>> > cryptomgr_test > >>> > > used > >>> > > > greatest > >>> > > > > stack > >>> > > > > > depth: 5864 bytes left > cryptomgr_test > >>> used > >>> > greatest > >>> > > stack > >>> > > > depth: > >>> > > > > 5816 > >>> > > > > > bytes left alg: No test > for stdrng > >>> (krng) > >>> > Block > >>> > > layer SCSI > >>> > > > > generic (bsg) > >>> > > > > > driver version 0.4 loaded > (major 252) > >>> io > >>> > scheduler > >>> > > noop > >>> > > > > registered io > >>> > > > > > scheduler anticipatory > registered io > >>> > scheduler > >>> > > deadline > >>> > > > > registered io > >>> > > > > > scheduler cfq registered > (default) > >>> > pci_hotplug: PCI > >>> > > Hot > >>> > > > Plug PCI > >>> > > > > Core > >>> > > > > > version: 0.5 pciehp > >>> 0000:00:09.0:pcie04: HPC > >>> > > vendor_id > >>> > > > 8086 > >>> > > > > device_id > >>> > > > > > 3410 ss_vid 0 ss_did 0 > pciehp: PCI > >>> Express > >>> > Hot Plug > >>> > > > Controller > >>> > > > > Driver > >>> > > > > > version: 0.4 acpiphp: > ACPI Hot Plug > >>> PCI > >>> > Controller > >>> > > Driver > >>> > > > > version: 0.5 > >>> > > > > > acpiphp_glue: Slot 2 > already > >>> registered by > >>> > another > >>> > > hotplug > >>> > > > driver > >>> > > > > > acpiphp_glue: Slot 2 > already > >>> registered by > >>> > another > >>> > > hotplug > >>> > > > driver > >>> > > > > > acpiphp_glue: Slot 2 > already > >>> registered by > >>> > another > >>> > > hotplug > >>> > > > driver > >>> > > > > > acpiphp_glue: Slot 2 > already > >>> registered by > >>> > another > >>> > > hotplug > >>> > > > driver > >>> > > > > > acpiphp_glue: Slot 2 > already > >>> registered by > >>> > another > >>> > > hotplug > >>> > > > driver > >>> > > > > > acpiphp_glue: Slot 2 > already > >>> registered by > >>> > another > >>> > > hotplug > >>> > > > driver > >>> > > > > > acpiphp_glue: Slot 2 > already > >>> registered by > >>> > another > >>> > > hotplug > >>> > > > driver > >>> > > > > > acpiphp_glue: Slot 2 > already > >>> registered by > >>> > another > >>> > > hotplug > >>> > > > driver > >>> > > > > > pci-stub: invalid id > string "" input: > >>> Sleep > >>> > Button > >>> > > as > >>> > > > > > > >>> > > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 > >>> > > > ACPI: > >>> > > > > Sleep > >>> > > > > > Button [SLPB] input: > Power Button as > >>> > > > > > > >>> > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: > >>> > > Power > >>> > > > Button > >>> > > > > [PWRF] > >>> > > > > > registering netback > hpet_acpi_add: no > >>> > address or > >>> > > irqs in > >>> > > > _CRS > >>> > > > > > Non-volatile memory > driver v1.3 Linux > >>> > agpgart > >>> > > interface > >>> > > > v0.103 > >>> > > > > Serial: > >>> > > > > > 8250/16550 driver, 4 > ports, IRQ > >>> sharing > >>> > enabled > >>> > > > serial8250: ttyS1 > >>> > > > > at I/O > >>> > > > > > 0x2f8 (irq = 3) is a > 16550A brd: > >>> module > >>> > loaded > >>> > > loop: > >>> > > > module > >>> > > > > loaded > >>> > > > > > input: Macintosh mouse > button > >>> emulation as > >>> > > > > /devices/virtual/input/input2 > >>> > > > > > ahci 0000:00:1f.2: PCI > INT A -> GSI > >>> 19 > >>> > (level, low) > >>> > > -> IRQ > >>> > > > 19 > >>> > > > > ahci > >>> > > > > > 0000:00:1f.2: AHCI > 0001.0200 32 slots > >>> 6 > >>> > ports 3 > >>> > > Gbps 0x3f > >>> > > > impl > >>> > > > > SATA mode > >>> > > > > > ahci 0000:00:1f.2: flags: > 64bit ncq > >>> sntf pm > >>> > led clo > >>> > > pio > >>> > > > slum part > >>> > > > > ccc > >>> > > > > > ems scsi0 : ahci scsi1 : > ahci scsi2 > >>> : ahci > >>> > scsi3 : > >>> > > ahci > >>> > > > scsi4 : > >>> > > > > ahci > >>> > > > > > scsi5 : ahci ata1: SATA > max UDMA/133 > >>> > irq_stat > >>> > > 0x00400040, > >>> > > > > connection > >>> > > > > > status changed irq 2996 > ata2: SATA > >>> max > >>> > UDMA/133 > >>> > > abar > >>> > > > > m2048@0xb1a00000 > >>> > > > > > port 0xb1a00180 irq 2996 > ata3: SATA > >>> max > >>> > UDMA/133 > >>> > > abar > >>> > > > > m2048@0xb1a00000 > >>> > > > > > port 0xb1a00200 irq 2996 > ata4: SATA > >>> max > >>> > UDMA/133 > >>> > > abar > >>> > > > > m2048@0xb1a00000 > >>> > > > > > port 0xb1a00280 irq 2996 > ata5: SATA > >>> max > >>> > UDMA/133 > >>> > > abar > >>> > > > > m2048@0xb1a00000 > >>> > > > > > port 0xb1a00300 irq 2996 > ata6: SATA > >>> max > >>> > UDMA/133 > >>> > > abar > >>> > > > > m2048@0xb1a00000 > >>> > > > > > port 0xb1a00380 irq 2996 > Fixed MDIO > >>> Bus: > >>> > probed > >>> > > ehci_hcd: > >>> > > > USB 2.0 > >>> > > > > > 'Enhanced' Host > Controller (EHCI) > >>> Driver > >>> > ehci_hcd > >>> > > > 0000:00:1a.7: > >>> > > > > PCI INT > >>> > > > > > C -> GSI 18 (level, low) > -> IRQ 18 > >>> ehci_hcd > >>> > > 0000:00:1a.7: > >>> > > > EHCI > >>> > > > > Host > >>> > > > > > Controller ehci_hcd > 0000:00:1a.7: new > >>> USB > >>> > bus > >>> > > registered, > >>> > > > > assigned bus > >>> > > > > > number 1 ehci_hcd > 0000:00:1a.7: debug > >>> port 1 > >>> > > ehci_hcd > >>> > > > > 0000:00:1a.7: irq > >>> > > > > > 18, io mem 0xb1a02000 > ehci_hcd > >>> 0000:00:1a.7: > >>> > USB > >>> > > 2.0 > >>> > > > started, > >>> > > > > EHCI 1.00 > >>> > > > > > usb usb1: New USB device > found, > >>> > idVendor=1d6b, > >>> > > > idProduct=0002 usb > >>> > > > > usb1: > >>> > > > > > New USB device strings: > Mfr=3, > >>> Product=2, > >>> > > SerialNumber=1 > >>> > > > usb > >>> > > > > usb1: > >>> > > > > > Product: EHCI Host > Controller usb > >>> usb1: > >>> > > Manufacturer: > >>> > > > Linux > >>> > > > > 2.6.32.9 > >>> > > > > > ehci_hcd usb usb1: > SerialNumber: > >>> > 0000:00:1a.7 usb > >>> > > usb1: > >>> > > > > configuration #1 > >>> > > > > > chosen from 1 choice hub > 1-0:1.0: USB > >>> hub > >>> > found hub > >>> > > > 1-0:1.0: 6 > >>> > > > > ports > >>> > > > > > detected ehci_hcd > 0000:00:1d.7: PCI > >>> INT A -> > >>> > GSI 23 > >>> > > > (level, low) > >>> > > > > -> IRQ > >>> > > > > > 23 ehci_hcd 0000:00:1d.7: > EHCI Host > >>> > Controller > >>> > > ehci_hcd > >>> > > > > 0000:00:1d.7: > >>> > > > > > new USB bus registered, > assigned bus > >>> number > >>> > 2 > >>> > > ehci_hcd > >>> > > > > 0000:00:1d.7: > >>> > > > > > debug port 1 ehci_hcd > 0000:00:1d.7: > >>> irq 23, > >>> > io mem > >>> > > > 0xb1a01000 > >>> > > > > ehci_hcd > >>> > > > > > 0000:00:1d.7: USB 2.0 > started, EHCI > >>> 1.00 usb > >>> > usb2: > >>> > > New USB > >>> > > > device > >>> > > > > found, > >>> > > > > > idVendor=1d6b, > idProduct=0002 usb > >>> usb2: New > >>> > USB > >>> > > device > >>> > > > strings: > >>> > > > > Mfr=3, > >>> > > > > > Product=2, SerialNumber=1 > usb usb2: > >>> Product: > >>> > EHCI > >>> > > Host > >>> > > > Controller > >>> > > > > usb > >>> > > > > > usb2: Manufacturer: Linux > 2.6.32.9 > >>> ehci_hcd > >>> > usb > >>> > > usb2: > >>> > > > > SerialNumber: > >>> > > > > > 0000:00:1d.7 usb usb2: > configuration > >>> #1 > >>> > chosen from > >>> > > 1 > >>> > > > choice hub > >>> > > > > > 2-0:1.0: USB hub found > hub 2-0:1.0: 6 > >>> ports > >>> > > detected > >>> > > > ohci_hcd: > >>> > > > > USB 1.1 > >>> > > > > > 'Open' Host Controller > (OHCI) Driver > >>> > uhci_hcd: USB > >>> > > > Universal Host > >>> > > > > > Controller Interface > driver > >>> > xen_allocate_pirq: > >>> > > returning > >>> > > > irq 16 > >>> > > > > for gsi > >>> > > > > > 16 Already setup the GSI > :16 uhci_hcd > >>> > 0000:00:1a.0: > >>> > > PCI > >>> > > > INT A -> > >>> > > > > GSI 16 > >>> > > > > > (level, low) -> IRQ 16 > uhci_hcd > >>> > 0000:00:1a.0: UHCI > >>> > > Host > >>> > > > > Controller > >>> > > > > > uhci_hcd 0000:00:1a.0: > new USB bus > >>> > registered, > >>> > > assigned > >>> > > > bus > >>> > > > > number 3 > >>> > > > > > uhci_hcd 0000:00:1a.0: > irq 16, io > >>> base > >>> > 0x000020e0 > >>> > > usb > >>> > > > usb3: New > >>> > > > > USB > >>> > > > > > device found, > idVendor=1d6b, > >>> idProduct=0001 > >>> > usb > >>> > > usb3: New > >>> > > > USB > >>> > > > > device > >>> > > > > > strings: Mfr=3, > Product=2, > >>> SerialNumber=1 > >>> > usb usb3: > >>> > > > Product: UHCI > >>> > > > > Host > >>> > > > > > Controller usb usb3: > Manufacturer: > >>> Linux > >>> > 2.6.32.9 > >>> > > uhci_hcd > >>> > > > usb > >>> > > > > usb3: > >>> > > > > > SerialNumber: > 0000:00:1a.0 usb usb3: > >>> > configuration > >>> > > #1 > >>> > > > chosen from > >>> > > > > 1 > >>> > > > > > choice hub 3-0:1.0: USB > hub found hub > >>> > 3-0:1.0: 2 > >>> > > ports > >>> > > > detected > >>> > > > > uhci_hcd > >>> > > > > > 0000:00:1a.1: PCI INT B > -> GSI 21 > >>> (level, > >>> > low) -> > >>> > > IRQ 21 > >>> > > > uhci_hcd > >>> > > > > > 0000:00:1a.1: UHCI Host > Controller > >>> uhci_hcd > >>> > > 0000:00:1a.1: > >>> > > > new USB > >>> > > > > bus > >>> > > > > > registered, assigned bus > number 4 > >>> uhci_hcd > >>> > > 0000:00:1a.1: > >>> > > > irq 21, > >>> > > > > io base > >>> > > > > > 0x000020c0 usb usb4: New > USB device > >>> found, > >>> > > idVendor=1d6b, > >>> > > > > idProduct=0001 > >>> > > > > > usb usb4: New USB device > strings: > >>> Mfr=3, > >>> > Product=2, > >>> > > > > SerialNumber=1 usb > >>> > > > > > usb4: Product: UHCI Host > Controller > >>> usb > >>> > usb4: > >>> > > > Manufacturer: Linux > >>> > > > > > 2.6.32.9 uhci_hcd usb > usb4: > >>> SerialNumber: > >>> > > 0000:00:1a.1 usb > >>> > > > usb4: > >>> > > > > > configuration #1 chosen > from 1 choice > >>> hub > >>> > 4-0:1.0: > >>> > > USB hub > >>> > > > found > >>> > > > > hub > >>> > > > > > 4-0:1.0: 2 ports detected > >>> xen_allocate_pirq: > >>> > > returning irq > >>> > > > 19 for > >>> > > > > gsi 19 > >>> > > > > > Already setup the GSI :19 > uhci_hcd > >>> > 0000:00:1a.2: > >>> > > PCI INT D > >>> > > > -> GSI > >>> > > > > 19 > >>> > > > > > (level, low) -> IRQ 19 > uhci_hcd > >>> > 0000:00:1a.2: UHCI > >>> > > Host > >>> > > > > Controller > >>> > > > > > uhci_hcd 0000:00:1a.2: > new USB bus > >>> > registered, > >>> > > assigned > >>> > > > bus > >>> > > > > number 5 > >>> > > > > > uhci_hcd 0000:00:1a.2: > irq 19, io > >>> base > >>> > 0x000020a0 > >>> > > usb > >>> > > > usb5: New > >>> > > > > USB > >>> > > > > > device found, > idVendor=1d6b, > >>> idProduct=0001 > >>> > usb > >>> > > usb5: New > >>> > > > USB > >>> > > > > device > >>> > > > > > strings: Mfr=3, > Product=2, > >>> SerialNumber=1 > >>> > usb usb5: > >>> > > > Product: UHCI > >>> > > > > Host > >>> > > > > > Controller usb usb5: > Manufacturer: > >>> Linux > >>> > 2.6.32.9 > >>> > > uhci_hcd > >>> > > > usb > >>> > > > > usb5: > >>> > > > > > SerialNumber: > 0000:00:1a.2 usb usb5: > >>> > configuration > >>> > > #1 > >>> > > > chosen from > >>> > > > > 1 > >>> > > > > > choice hub 5-0:1.0: USB > hub found hub > >>> > 5-0:1.0: 2 > >>> > > ports > >>> > > > detected > >>> > > > > > xen_allocate_pirq: > returning irq 23 > >>> for gsi > >>> > 23 > >>> > > Already > >>> > > > setup the > >>> > > > > GSI :23 > >>> > > > > > uhci_hcd 0000:00:1d.0: > PCI INT A -> > >>> GSI 23 > >>> > (level, > >>> > > low) -> > >>> > > > IRQ 23 > >>> > > > > > uhci_hcd 0000:00:1d.0: > UHCI Host > >>> Controller > >>> > > uhci_hcd > >>> > > > > 0000:00:1d.0: new > >>> > > > > > USB bus registered, > assigned bus > >>> number 6 > >>> > uhci_hcd > >>> > > > 0000:00:1d.0: > >>> > > > > irq 23, > >>> > > > > > io base 0x00002080 usb > usb6: New USB > >>> device > >>> > found, > >>> > > > idVendor=1d6b, > >>> > > > > > idProduct=0001 usb usb6: > New USB > >>> device > >>> > strings: > >>> > > Mfr=3, > >>> > > > > Product=2, > >>> > > > > > SerialNumber=1 usb usb6: > Product: > >>> UHCI Host > >>> > > Controller usb > >>> > > > usb6: > >>> > > > > > Manufacturer: Linux > 2.6.32.9 uhci_hcd > >>> usb > >>> > usb6: > >>> > > > SerialNumber: > >>> > > > > > 0000:00:1d.0 usb usb6: > configuration > >>> #1 > >>> > chosen from > >>> > > 1 > >>> > > > choice hub > >>> > > > > > 6-0:1.0: USB hub found > hub 6-0:1.0: 2 > >>> ports > >>> > > detected > >>> > > > > xen_allocate_pirq: > >>> > > > > > returning irq 19 for gsi > 19 Already > >>> setup > >>> > the GSI > >>> > > :19 > >>> > > > uhci_hcd > >>> > > > > > 0000:00:1d.1: PCI INT B > -> GSI 19 > >>> (level, > >>> > low) -> > >>> > > IRQ 19 > >>> > > > uhci_hcd > >>> > > > > > 0000:00:1d.1: UHCI Host > Controller > >>> uhci_hcd > >>> > > 0000:00:1d.1: > >>> > > > new USB > >>> > > > > bus > >>> > > > > > registered, assigned bus > number 7 > >>> uhci_hcd > >>> > > 0000:00:1d.1: > >>> > > > irq 19, > >>> > > > > io base > >>> > > > > > 0x00002060 usb usb7: New > USB device > >>> found, > >>> > > idVendor=1d6b, > >>> > > > > idProduct=0001 > >>> > > > > > usb usb7: New USB device > strings: > >>> Mfr=3, > >>> > Product=2, > >>> > > > > SerialNumber=1 usb > >>> > > > > > usb7: Product: UHCI Host > Controller > >>> usb > >>> > usb7: > >>> > > > Manufacturer: Linux > >>> > > > > > 2.6.32.9 uhci_hcd usb > usb7: > >>> SerialNumber: > >>> > > 0000:00:1d.1 usb > >>> > > > usb7: > >>> > > > > > configuration #1 chosen > from 1 choice > >>> hub > >>> > 7-0:1.0: > >>> > > USB hub > >>> > > > found > >>> > > > > hub > >>> > > > > > 7-0:1.0: 2 ports detected > >>> xen_allocate_pirq: > >>> > > returning irq > >>> > > > 18 for > >>> > > > > gsi 18 > >>> > > > > > Already setup the GSI :18 > uhci_hcd > >>> > 0000:00:1d.2: > >>> > > PCI INT C > >>> > > > -> GSI > >>> > > > > 18 > >>> > > > > > (level, low) -> IRQ 18 > uhci_hcd > >>> > 0000:00:1d.2: UHCI > >>> > > Host > >>> > > > > Controller > >>> > > > > > uhci_hcd 0000:00:1d.2: > new USB bus > >>> > registered, > >>> > > assigned > >>> > > > bus > >>> > > > > number 8 > >>> > > > > > uhci_hcd 0000:00:1d.2: > irq 18, io > >>> base > >>> > 0x00002040 > >>> > > usb > >>> > > > usb8: New > >>> > > > > USB > >>> > > > > > device found, > idVendor=1d6b, > >>> idProduct=0001 > >>> > usb > >>> > > usb8: New > >>> > > > USB > >>> > > > > device > >>> > > > > > strings: Mfr=3, > Product=2, > >>> SerialNumber=1 > >>> > usb usb8: > >>> > > > Product: UHCI > >>> > > > > Host > >>> > > > > >>> > > > >>> > > References > >>> > > > >>> > > Visible links > >>> > > 1. mailto:[20][21]pasik@iki.fi > >>> > > 2. mailto:[21][22]pasik@iki.fi > >>> > > 3. mailto:[22][23]pasik@iki.fi > >>> > > 4. mailto:[23][24]pasik@iki.fi > >>> > > 5. mailto:[24][25]pasik@iki.fi > >>> > > 6. > >>> > > >>> [25][26] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > > 7. > >>> > > >>> [26][27] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > > 8. mailto:[27][28]pasik@iki.fi > >>> > > 9. > >>> > > >>> [28][29] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > > 10. > >>> > > >>> [29][30] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > > 11. mailto:[30][31]pasik@iki.fi > >>> > > 12. mailto:[31][32]pasik@iki.fi > >>> > > 13. > >>> > > >>> [32][33] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > > 14. > >>> > > >>> [33][34] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > > 15. mailto:[34][35]pasik@iki.fi > >>> > > 16. > >>> > > >>> [35][36] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > > 17. > >>> > > >>> [36][37] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > > 18. mailto:[37][38]pasik@iki.fi > >>> > > >>> > References > >>> > > >>> > Visible links > >>> > 1. mailto:[39]pasik@iki.fi > >>> > 2. mailto:[40]pasik@iki.fi > >>> > 3. mailto:[41]pasik@iki.fi > >>> > 4. mailto:[42]pasik@iki.fi > >>> > 5. mailto:[43]pasik@iki.fi > >>> > 6. mailto:[44]pasik@iki.fi > >>> > 7. > >>> [45] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > 8. > >>> [46] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > 9. mailto:[47]pasik@iki.fi > >>> > 10. > >>> [48] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > 11. > >>> [49] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > 12. mailto:[50]pasik@iki.fi > >>> > 13. mailto:[51]pasik@iki.fi > >>> > 14. > >>> [52] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > 15. > >>> [53] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > 16. mailto:[54]pasik@iki.fi > >>> > 17. > >>> [55] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > 18. > >>> [56] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > 19. mailto:[57]pasik@iki.fi > >>> > 20. mailto:[58]pasik@iki.fi > >>> > 21. mailto:[59]pasik@iki.fi > >>> > 22. mailto:[60]pasik@iki.fi > >>> > 23. mailto:[61]pasik@iki.fi > >>> > 24. mailto:[62]pasik@iki.fi > >>> > 25. > >>> [63] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > 26. > >>> [64] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > 27. mailto:[65]pasik@iki.fi > >>> > 28. > >>> [66] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > 29. > >>> [67] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > 30. mailto:[68]pasik@iki.fi > >>> > 31. mailto:[69]pasik@iki.fi > >>> > 32. > >>> [70] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > 33. > >>> [71] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > 34. mailto:[72]pasik@iki.fi > >>> > 35. > >>> [73] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > 36. > >>> [74] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > 37. mailto:[75]pasik@iki.fi > >>> > >>> References > >>> > >>> Visible links > >>> 1. mailto:pasik@iki.fi > >>> 2. mailto:pasik@iki.fi > >>> 3. mailto:pasik@iki.fi > >>> 4. mailto:pasik@iki.fi > >>> 5. mailto:pasik@iki.fi > >>> 6. mailto:pasik@iki.fi > >>> 7. mailto:pasik@iki.fi > >>> 8. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 9. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 10. mailto:pasik@iki.fi > >>> 11. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 12. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 13. mailto:pasik@iki.fi > >>> 14. mailto:pasik@iki.fi > >>> 15. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 16. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 17. mailto:pasik@iki.fi > >>> 18. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 19. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 20. mailto:pasik@iki.fi > >>> 21. mailto:pasik@iki.fi > >>> 22. mailto:pasik@iki.fi > >>> 23. mailto:pasik@iki.fi > >>> 24. mailto:pasik@iki.fi > >>> 25. mailto:pasik@iki.fi > >>> 26. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 27. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 28. mailto:pasik@iki.fi > >>> 29. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 30. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 31. mailto:pasik@iki.fi > >>> 32. mailto:pasik@iki.fi > >>> 33. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 34. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 35. mailto:pasik@iki.fi > >>> 36. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 37. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 38. mailto:pasik@iki.fi > >>> 39. mailto:pasik@iki.fi > >>> 40. mailto:pasik@iki.fi > >>> 41. mailto:pasik@iki.fi > >>> 42. mailto:pasik@iki.fi > >>> 43. mailto:pasik@iki.fi > >>> 44. mailto:pasik@iki.fi > >>> 45. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 46. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 47. mailto:pasik@iki.fi > >>> 48. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 49. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 50. mailto:pasik@iki.fi > >>> 51. mailto:pasik@iki.fi > >>> 52. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 53. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 54. mailto:pasik@iki.fi > >>> 55. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 56. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 57. mailto:pasik@iki.fi > >>> 58. mailto:pasik@iki.fi > >>> 59. mailto:pasik@iki.fi > >>> 60. mailto:pasik@iki.fi > >>> 61. mailto:pasik@iki.fi > >>> 62. mailto:pasik@iki.fi > >>> 63. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 64. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 65. mailto:pasik@iki.fi > >>> 66. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 67. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 68. mailto:pasik@iki.fi > >>> 69. mailto:pasik@iki.fi > >>> 70. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 71. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 72. mailto:pasik@iki.fi > >>> 73. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 74. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 75. mailto:pasik@iki.fi > >>> > >> > >> > > > [-- Attachment #1.2: Type: text/html, Size: 238294 bytes --] [-- Attachment #2: mar_19.doc --] [-- Type: application/msword, Size: 161020 bytes --] [-- Attachment #3: Screenshot.png --] [-- Type: image/png, Size: 392691 bytes --] [-- Attachment #4: Type: text/plain, Size: 137 bytes --] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: crash in print_all_ICs() 2010-03-19 19:57 ` [Xen-devel] " kishore kumar @ 2010-03-19 20:03 ` Pasi Kärkkäinen 2010-03-22 20:23 ` kishore kumar 0 siblings, 1 reply; 32+ messages in thread From: Pasi Kärkkäinen @ 2010-03-19 20:03 UTC (permalink / raw) To: kishore kumar; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users On Fri, Mar 19, 2010 at 12:57:58PM -0700, kishore kumar wrote: > Attached is the captured file. > > Now the machine booted up. :) 2.6.32.10 is booted. > > But I dont see xen up and running. > > Whe I open Virtual Machine Manager I dont see xen running. (ATTACHED IS > THE SCREEN SHOT). > - Do you have /proc/xen (xenfs) mounted? - Do you have xen-evtchn driver module loaded in dom0? - Do you have xend running? Please see and read this wiki page: http://wiki.xensource.com/xenwiki/XenParavirtOps It explains the other configurations you need to do for Xen/xend to actually work. Anyway, the problem for you was wrong grub.conf root= option for the dom0 kernel. -- Pasi > On Fri, Mar 19, 2010 at 12:05 PM, Pasi Kärkkäinen <[1]pasik@iki.fi> wrote: > > On Fri, Mar 19, 2010 at 11:22:54AM -0700, Jeremy Fitzhardinge wrote: > > On 03/19/2010 10:59 AM, Pasi Kärkkäinen wrote: > >> On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar wrote: > >> > >>> Attached is the capture log after changing the grub.conf to > >>> > >>> ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen > nomodeset > >>> initcall_debug debug swiotlb=force apic=debug loglevel=10 > >>> > >>> for the dom 0 kernel command line. > >>> > >>> > >> Hmm, interesting. Now it seems to crash in a different place. > >> > >> Jeremy: Have you seen this one earlier? > >> > > > > No, but it looks like the result of "apic=debug" on the kernel command > > line. That won't do anything useful (the kernel has no APICs, they > all > > belong to Xen), and can only cause harm. As it appears to have done. > > > > Ok, my bad. > > So please remove the "apic=debug" from the dom0 kernel cmdline and try > again. > It should look like this: > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset > initcall_debug debug loglevel=10 > > -- Pasi > > > J > > > >> .... IRQ redirection table: > >> NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: > >> 00 000 0 0 0 0 0 0 0 00 > >> IRQ to pin mappings: > >> BUG: unable to handle kernel NULL pointer dereference at (null) > >> IP: [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 > >> PGD 0 > >> Oops: 0000 [#1] SMP > >> last sysfs file: > >> CPU 0 > >> Modules linked in: > >> Pid: 1, comm: swapper Not tainted 2.6.32.10 #2 > >> RIP: e030:[<ffffffff819bf0e0>] [<ffffffff819bf0e0>] > print_all_ICs+0x487/0x500 > >> RSP: e02b:ffff880064edbe20 EFLAGS: 00010286 > >> RAX: ffffffff816ed2c0 RBX: 0000000000000000 RCX: 000000000f640f01 > >> RDX: ffff880066808000 RSI: ffff880064edbd40 RDI: 0000000000000000 > >> RBP: ffff880064edbea0 R08: 0000000000000002 R09: 0000000000000000 > >> R10: 0000000000000000 R11: ffff880064edbce0 R12: 0000000000000000 > >> R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 > >> FS: 0000000000000000(0000) GS:ffff880005ec8000(0000) > knlGS:0000000000000000 > >> CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b > >> CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002660 > >> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > >> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > >> Process swapper (pid: 1, threadinfo ffff880064eda000, task > ffff880064ee0000) > >> Stack: > >> ffff880000000000 ffffffff00000000 ffff880000000000 ffffffff811ebee8 > >> <0> ffff880064edbe60 0000000181083e7c 000000ff00000002 > 0000000000000002 > >> <0> ffff880000000000 ffffffff810846f0 ffffffff817ce660 > 00000000291fd332 > >> Call Trace: > >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e > >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93 > >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 > >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc > >> [<ffffffff81013eaa>] child_rip+0xa/0x20 > >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > >> [<ffffffff81013810>] ? restore_args+0x0/0x30 > >> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 > >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20 > >> Code: 45 b0 0f 8c 5b fd ff ff 48 c7 c7 34 40 60 81 31 c0 45 31 e4 e8 > 11 d5 69 ff 31 ff e8 67 b5 6f ff eb 5a 48 85 c0 74 4a 48 8b 58 40<48> > 83 3b 00 74 40 44 89 e6 48 c7 c7 4d 40 60 81 31 c0 e8 e8 d4 > >> RIP [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 > >> RSP<ffff880064edbe20> > >> CR2: 0000000000000000 > >> ---[ end trace 0007ad9d59420718 ]--- > >> swapper used greatest stack depth: 4168 bytes left > >> Kernel panic - not syncing: Attempted to kill init! > >> Pid: 1, comm: swapper Tainted: G D 2.6.32.10 #2 > >> Call Trace: > >> [<ffffffff8105b747>] panic+0xa5/0x167 > >> [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf > >> [<ffffffff8105f2b3>] ? do_exit+0x38a/0x701 > >> [<ffffffff8100f43f>] ? xen_restore_fl_direct_end+0x0/0x1 > >> [<ffffffff8108f823>] ? lock_release+0x179/0x184 > >> [<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf > >> [<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c > >> [<ffffffff8105efa7>] do_exit+0x7e/0x701 > >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef > >> [<ffffffff8147764c>] oops_end+0xbf/0xc7 > >> [<ffffffff81038a02>] no_context+0x1f1/0x200 > >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef > >> [<ffffffff81038c61>] __bad_area_nosemaphore+0x191/0x1b4 > >> [<ffffffff8100f452>] ? check_events+0x12/0x20 > >> [<ffffffff81038d0e>] bad_area_nosemaphore+0x13/0x15 > >> [<ffffffff81478b20>] do_page_fault+0x16d/0x2a2 > >> [<ffffffff814769d5>] page_fault+0x25/0x30 > >> [<ffffffff819bf0e0>] ? print_all_ICs+0x487/0x500 > >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e > >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93 > >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 > >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc > >> [<ffffffff81013eaa>] child_rip+0xa/0x20 > >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > >> [<ffffffff81013810>] ? restore_args+0x0/0x30 > >> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 > >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20 > >> > >> > >> -- Pasi > >> > >> > >> > >>> > >>> On Thu, Mar 18, 2010 at 2:27 PM, Pasi > Kärkkäinen<[1][2]pasik@iki.fi> wrote: > >>> > >>> On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar wrote: > >>> > pvdisplay does not work in my RHEL machine. > >>> > > >>> > I did pvscan. > >>> > below is the output. > >>> > > >>> > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free] > >>> > > >>> > Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no VG: > 0 [0 ] > >>> > > >>> > >>> Ok so /dev/sda2 is the correct device holding the VolGroup01. > >>> > >>> Looking at your latest capture.doc I see this: > >>> > >>> Command line: ro root=/dev/vg00/lv01 console=hvc0 > earlyprintk=xen > >>> nomodeset initcall_debug debug swiotlb=force apic=debug > loglevel=10 > >>> > >>> So your root= parameter is wrong! Edit grub.conf and replace > it with the > >>> actual root device: > >>> root=/dev/VolGroup01/LogVol00 > >>> > >>> -- Pasi > >>> > >>> > On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen > >>> <[1][2][3]pasik@iki.fi> wrote: > >>> > > >>> > On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore > kumar wrote: > >>> > > I did the below steps for pvops dom 0 kernel. > >>> > > > >>> > > make menuconfig > >>> > > make bzImage > >>> > > make modules > >>> > > make modules_install > >>> > > cp -a .config /boot/config-2.6.32.10 > >>> > > cp -a System.map /boot/System.map-2.6.32.10 > >>> > > cp -a arch/x86/boot/bzImage > /boot/vmlinuz-2.6.32.10 > >>> > > /sbin/mkinitrd -f --builtin=ahci > /boot/initrd-2.6.32.10.img > >>> > 2.6.32.10 > >>> > > I tried root=/dev/VolGroup01/LogVol00 . > >>> > > > >>> > > >>> > Ok. > >>> > > >>> > Please run "pvdisplay" to see which actual partition > is the LVM > >>> PV for > >>> > your > >>> > volume group. > >>> > > >>> > Also if you're running Fedora 12 you could try > generating an > >>> initrd > >>> > image > >>> > with dracut instead of mkinitrd. > >>> > > >>> > -- Pasi > >>> > > >>> > > > >>> > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen > >>> > <[1][2][3][4]pasik@iki.fi> wrote: > >>> > > > >>> > > On Wed, Mar 17, 2010 at 03:20:13PM -0700, > kishore kumar > >>> wrote: > >>> > > > Here is the output of df -h and cat > /etc/fstab of my > >>> > machine. > >>> > > > > >>> > > > >>> > > Did you try both > root=/dev/mapper/VolGroup01-LogVol00 and > >>> > > root=/dev/VolGroup01/LogVol00 arguments for > the dom0 > >>> kernel? > >>> > > > >>> > > How did you generate the initrd image for the > dom0 kernel? > >>> > > > >>> > > Anyway this sounds like a grub.conf or initrd > problem, not > >>> Xen or > >>> > pvops > >>> > > dom0 kernel kernel problem. > >>> > > > >>> > > -- Pasi > >>> > > > >>> > > > Please let me know your thoughts. > >>> > > > > >>> > > > [root@localhost kishore]# df -h > >>> > > > > >>> > > > Filesystem Size Used Avail Use% Mounted > on > >>> > > > > >>> > > > /dev/mapper/VolGroup01-LogVol00 > >>> > > > > >>> > > > 223G > 29G 182G 14% > >>> / > >>> > > > > >>> > > > /dev/sda1 99M 81M 13M 87% /boot > >>> > > > > >>> > > > tmpfs 757M 0 757M 0% /dev/shm > >>> > > > > >>> > > > [root@localhost kishore]# cat /etc/fstab > >>> > > > > >>> > > > /dev/VolGroup01/LogVol00 / ext3 defaults > 1 1 > >>> > > > > >>> > > > LABEL=/boot /boot ext3 defaults 1 2 > >>> > > > > >>> > > > tmpfs /dev/shm tmpfs defaults 0 0 > >>> > > > > >>> > > > devpts /dev/pts devpts gid=5,mode=620 0 > 0 > >>> > > > > >>> > > > sysfs /sys sysfs defaults 0 0 > >>> > > > > >>> > > > proc /proc proc defaults 0 0 > >>> > > > > >>> > > > /dev/VolGroup01/LogVol01 swap swap > defaults 0 0 > >>> > > > > >>> > > > [root@localhost kishore]# > >>> > > > > >>> > > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi > Kärkkäinen > >>> > > <[1][2][3][4][5]pasik@iki.fi> wrote: > >>> > > > > >>> > > > On Tue, Mar 16, 2010 at 03:40:46PM > -0700, kishore > >>> kumar > >>> > wrote: > >>> > > > > I am not sure. Can you please > let me know how > >>> to > >>> > check > >>> > > this? any > >>> > > > command > >>> > > > > ?? > >>> > > > > >>> > > > well simple "df -h" will show it. and > also "cat > >>> > /etc/fstab". > >>> > > > You can also check it from your grub > >>> configuration.. from > >>> > the > >>> > > working > >>> > > > baremetal (non-Xen) entry. > >>> > > > > >>> > > > -- Pasi > >>> > > > > > >>> > > > > On Tue, Mar 16, 2010 at 3:29 PM, > Pasi > >>> Kärkkäinen > >>> > > > <[1][2][3][4][5][6]pasik@iki.fi> > wrote: > >>> > > > > > >>> > > > > On Tue, Mar 16, 2010 at > 03:22:50PM -0700, > >>> kishore > >>> > kumar > >>> > > wrote: > >>> > > > > > attached is the log > captured in with > >>> the word > >>> > > document . > >>> > > > > > > >>> > > > > > >>> > > > > Scanning logical volumes > >>> > > > > Reading all physical volumes. > This may > >>> take a > >>> > while... > >>> > > > > Activating logical volumes > >>> > > > > Volume group "VolGroup01" not > found > >>> > > > > Trying to resume from > >>> /dev/VolGroup01/LogVol01 > >>> > > > > Unable to access resume device > >>> > (/dev/VolGroup01/LogVol01) > >>> > > > > Creating root device. > >>> > > > > Mounting root filesystem. > >>> > > > > mount: could not find > filesystem '/dev/root' > >>> > > > > Setting up other filesystems. > >>> > > > > Setting up new root fs > >>> > > > > setuproot: moving /dev failed: > No such file > >>> or > >>> > directory > >>> > > > > no fstab.sys, mounting > internal defaults > >>> > > > > setuproot: error mounting > /proc: No such > >>> file or > >>> > directory > >>> > > > > setuproot: error mounting > /sys: No such file > >>> or > >>> > directory > >>> > > > > Switching to new root and > running init. > >>> > > > > unmounting old /dev > >>> > > > > unmounting old /proc > >>> > > > > unmounting old /sys > >>> > > > > switchroot: mount failed: No > such file or > >>> directory > >>> > > > > init used greatest stack > depth: 4088 bytes > >>> left > >>> > > > > Kernel panic - not syncing: > Attempted to > >>> kill init! > >>> > > > > > >>> > > > > So it seems it gets all the > way to executing > >>> the > >>> > initrd > >>> > > image, > >>> > > > > which then fails to mount the > root fs. > >>> > > > > > >>> > > > > Earlier in the log: > >>> > > > > ata1: SATA link up 3.0 Gbps > (SStatus 123 > >>> SControl > >>> > 300) > >>> > > > > ata1.00: ATA-8: Hitachi > HDT721025SLA380, > >>> STBOA3AA, > >>> > max > >>> > > UDMA/133 > >>> > > > > ata1.00: 488397168 sectors, > multi 0: LBA48 > >>> NCQ > >>> > (depth > >>> > > 31/32), AA > >>> > > > > ata1.00: configured for > UDMA/133 > >>> > > > > scsi 0:0:0:0: Direct-Access > ATA > >>> Hitachi > >>> > HDT72102 > >>> > > STBO > >>> > > > PQ: 0 > >>> > > > > ANSI: 5 > >>> > > > > sd 0:0:0:0: Attached scsi > generic sg0 type 0 > >>> > > > > sd 0:0:0:0: [sda] 488397168 > 512-byte logical > >>> > blocks: (250 > >>> > > GB/232 > >>> > > > GiB) > >>> > > > > sd 0:0:0:0: [sda] Write > Protect is off > >>> > > > > sd 0:0:0:0: [sda] Mode Sense: > 00 3a 00 00 > >>> > > > > sd 0:0:0:0: [sda] Write cache: > enabled, read > >>> cache: > >>> > > enabled, > >>> > > > doesn't > >>> > > > > support DPO or FUA > >>> > > > > sda: sda1 sda2 > >>> > > > > sd 0:0:0:0: [sda] Attached > SCSI disk > >>> > > > > > >>> > > > > so /dev/sda was detected. Is > your root lvm > >>> volume > >>> > on > >>> > > /dev/sda ? > >>> > > > > Is /dev/VolGroup01/LogVol01 > really your root > >>> fs? > >>> > > > > > >>> > > > > -- Pasi > >>> > > > > > >>> > > > > > > >>> > > > > > > >>> > > > > > On Tue, Mar 16, 2010 at > 3:03 PM, Pasi > >>> > Kärkkäinen > >>> > > > > > <[1][2][3][4][5][6][7]pasik@iki.fi> wrote: > >>> > > > > > > >>> > > > > > On Tue, Mar 16, 2010 > at 02:56:06PM > >>> -0700, > >>> > kishore > >>> > > kumar > >>> > > > wrote: > >>> > > > > > > Please find the > attached log > >>> file after > >>> > fixing > >>> > > the > >>> > > > dom 0 > >>> > > > > kernel cmd > >>> > > > > > line > >>> > > > > > > as below > >>> > > > > > > > >>> > > > > > > ro > root=/dev/VolGroup01/LogVol00 > >>> > console=hvc0 > >>> > > > > earlyprintk=xen > >>> > > > > > nomodeset > >>> > > > > > > > >>> > > > > > > >>> > > > > > There's something > wrong with the log, > >>> the > >>> > dom0 > >>> > > kernel > >>> > > > parts are > >>> > > > > all on > >>> > > > > > one line.. > >>> > > > > > It's really difficult > to read it. > >>> > > > > > > >>> > > > > > -- Pasi > >>> > > > > > > >>> > > > > > > Thanks > >>> > > > > > > > >>> > > > > > > > >>> > > > > > > On Tue, Mar 16, > 2010 at 2:29 PM, > >>> Pasi > >>> > > Kärkkäinen > >>> > > > > > > <[1][2][3][4][5][6][7][8]pasik@iki.fi> > >>> wrote: > >>> > > > > > > > >>> > > > > > > On Tue, Mar > 16, 2010 at > >>> 02:16:22PM > >>> > -0700, > >>> > > kishore > >>> > > > kumar > >>> > > > > wrote: > >>> > > > > > > > I did > below steps. > >>> > > > > > > > > >>> > > > > > > > > >>> > > > > > > > I > pulled DOM 0 kernel > >>> from > >>> > > > > > > > git > clone > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > git://[1][2][3][4][5][6][7][8][9]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > > > > > > > > linux-2.6-xen > >>> > > > > > > > > >>> > > > > > > > cd > linux-2.6-xen > >>> > > > > > > > > >>> > > > > > > > make > clean > >>> > > > > > > > > >>> > > > > > > > cp -a > .config .config-old > >>> > > > > > > > > >>> > > > > > > > wget -O > .config > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > [2][3][4][5][6][7][8][9][10]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > > > > > > > > >>> > > > > > > > make > oldconfig > >>> > > > > > > > > >>> > > > > > > > make > bzImage > >>> > > > > > > > > >>> > > > > > > > make > modules > >>> > > > > > > > > >>> > > > > > > > make > modules_install > >>> > > > > > > > > >>> > > > > > > > cp -a > .config > >>> > /boot/config-2.6.32.9 > >>> > > > > > > > > >>> > > > > > > > cp -a > System.map > >>> > > /boot/System.map-2.6.32.9 > >>> > > > > > > > > >>> > > > > > > > cp -a > >>> arch/x86/boot/bzImage > >>> > > > /boot/vmlinuz-2.6.32.9 > >>> > > > > > > > > >>> > > > > > > > and > modified the > >>> grub.conf as > >>> > below > >>> > > > > > > > > >>> > > > > > > > > >>> > > > > > > > > Root(hd0,0) > >>> > > > > > > > > >>> > > > > > > > kernel > /xen.gz > >>> console=vga,com1 > >>> > > > com1=115200,8n1 > >>> > > > > msi=1 > >>> > > > > > iommu=1 > >>> > > > > > > > > >>> > > > > > > > module > /vmlinuz-2.6.32.9 > >>> ro > >>> > > > > root=/dev/VolGroup01/LogVo100 > >>> > > > > > rhgb > >>> > > > > > > quiet > >>> > > > > > > > > >>> > > > > > > > module > >>> /initrd-2.6.32.9.img > >>> > > > > > > > > >>> > > > > > > > > >>> > > > > > > > and > rebooted the machine. > >>> Then > >>> > It > >>> > > booted with > >>> > > > some > >>> > > > > xen > >>> > > > > > messages > >>> > > > > > > and > >>> > > > > > > > stopped. > Those were the > >>> > messages > >>> > > captured > >>> > > > from > >>> > > > > serial > >>> > > > > > console. > >>> > > > > > > > > >>> > > > > > > > Please > let me know if I > >>> did > >>> > something > >>> > > wrong > >>> > > > here. > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > Please fix the > kernel cmdline > >>> based > >>> > on my > >>> > > earlier > >>> > > > email, > >>> > > > > and > >>> > > > > > capture and > >>> > > > > > > post the > >>> > > > > > > serial console > log again! > >>> > > > > > > > >>> > > > > > > -- Pasi > >>> > > > > > > > > >>> > > > > > > > > >>> > > > > > > > On Tue, > Mar 16, 2010 at > >>> 1:20 PM, > >>> > Pasi > >>> > > > Kärkkäinen > >>> > > > > > > > >>> <[3][4][5][6][7][8][9][10][11]pasik@iki.fi> > >>> > wrote: > >>> > > > > > > > > >>> > > > > > > > On > Tue, Mar 16, 2010 at > >>> > 01:16:28PM > >>> > > -0700, > >>> > > > Jeremy > >>> > > > > > Fitzhardinge > >>> > > > > > > wrote: > >>> > > > > > > > > On > 03/16/2010 12:48 > >>> PM, Pasi > >>> > > Kärkkäinen > >>> > > > wrote: > >>> > > > > > > > >> On > Tue, Mar 16, 2010 > >>> at > >>> > 09:43:44PM > >>> > > +0200, > >>> > > > Pasi > >>> > > > > > Kärkkäinen > >>> > > > > > > wrote: > >>> > > > > > > > >> > >>> > > > > > > > >>> > On Tue, Mar 16, > >>> 2010 at > >>> > > 10:32:17AM > >>> > > > -0700, > >>> > > > > kishore > >>> > > > > > kumar > >>> > > > > > > wrote: > >>> > > > > > > > >>> > >>> > > > > > > > >>>> > Attached is > >>> the > >>> > output > >>> > > captured > >>> > > > from > >>> > > > > serial > >>> > > > > > console. > >>> > > > > > > > >>>> > >>> > > > > > > > >>>> > Machine does > >>> not boot > >>> > after > >>> > > > compiling xen > >>> > > > > 3.4.3 > >>> > > > > > with > >>> > > > > > > pv_ops dom > >>> > > > > > > > 0 > kernel. > >>> > > > > > > > >>>> > >>> > > > > > > > >>>> > Please let me > >>> know > >>> > what is > >>> > > going > >>> > > > wrong > >>> > > > > here. > >>> > > > > > > > >>>> > >>> > > > > > > > >>>> > >>> > > > > > > > >>> > Ok this looks like > >>> a bug > >>> > that is > >>> > > already > >>> > > > being > >>> > > > > sorted > >>> > > > > > out on > >>> > > > > > > > > xen-devel mailinglist. > >>> > > > > > > > >>> I > added CC to > >>> xen-devel. > >>> > > > > > > > >>> > >>> > > > > > > > >>> > >>> > > > > > > > >> > >>> > > > > > > > > > >>> > > > > > > > > > Those messages are > >>> not a > >>> > problem in > >>> > > > themselves, > >>> > > > > but the > >>> > > > > > related > >>> > > > > > > > > problem > >>> > > > > > > > > is > believed to be > >>> fixed in > >>> > current > >>> > > > > xen/stable-2.6.32.x. > >>> > > > > > It > >>> > > > > > > looks like > >>> > > > > > > > > the > output stops > >>> there > >>> > because the > >>> > > Xen > >>> > > > console > >>> > > > > isn't set > >>> > > > > > up > >>> > > > > > > properly > >>> > > > > > > > for > >>> > > > > > > > > > some reason. > >>> > > > > > > > > > >>> > > > > > > > > >>> > > > > > > > Yeah, > remove "rhgb > >>> quiet" from > >>> > the > >>> > > options.. > >>> > > > the > >>> > > > > dom0 > >>> > > > > > kernel > >>> > > > > > > cmdline > >>> > > > > > > > should > be like this: > >>> > > > > > > > ro > >>> > root=/dev/VolGroup01/LogVol00 > >>> > > > console=hvc0 > >>> > > > > > earlyprintk=xen > >>> > > > > > > nomodeset > >>> > > > > > > > -- > Pasi > >>> > > > > > > > > >>> > > > > > > > References > >>> > > > > > > > > >>> > > > > > > > Visible > links > >>> > > > > > > > 1. > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > [5][6][7][8][9][10][11][12]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > > > > > > > 2. > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > [6][7][8][9][10][11][12][13]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > > > > > > > 3. > >>> > mailto:[7][8][9][10][11][12][13][14]pasik@iki.fi > >>> > > > > > > > >>> > > > > > > References > >>> > > > > > > > >>> > > > > > > Visible links > >>> > > > > > > 1. > >>> > mailto:[9][10][11][12][13][14][15]pasik@iki.fi > >>> > > > > > > 2. > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > [10][11][12][13][14][15][16]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > > > > > > 3. > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > [11][12][13][14][15][16][17]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > > > > > > 4. > >>> > mailto:[12][13][14][15][16][17][18]pasik@iki.fi > >>> > > > > > > 5. > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > [13][14][15][16][17][18][19]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > > > > > > 6. > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > [14][15][16][17][18][19][20]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > > > > > > 7. > >>> > mailto:[15][16][17][18][19][20][21]pasik@iki.fi > >>> > > > > > > Asserting Post > complete GPIO!!! > >>> > > > > > > Transfer control to > CSM 16-bit > >>> binary for > >>> > legacy > >>> > > boot > >>> > > > > > > __ __ > _____ _ _ > >>> _____ > >>> > > _ _ > >>> > > > > > > \ \/ /___ _ __ > |___ /| || | > >>> |___ / > >>> > _ __ > >>> > > ___| || | > >>> > > > _ > >>> > > > > __ _ > >>> > > > > > __ ___ > >>> > > > > > > \ // _ \ '_ \ > |_ \| || |_ > >>> |_ \ __| > >>> > '__/ > >>> > > __| || > >>> > > > |_ __| > >>> > > > > '_ \| > >>> > > > > > '__/ _ \ > >>> > > > > > > / \ __/ | | | > ___) |__ _| > >>> ___) |__| > >>> > | | > >>> > > (__|__ > >>> > > > _|__| > >>> > > > > |_) | | > >>> > > > > > | __/ > >>> > > > > > > /_/\_\___|_| |_| > |____(_) > >>> |_|(_)____/ > >>> > |_| > >>> > > \___| |_| > >>> > > > | > >>> > > > > .__/|_| > >>> > > > > > \___| > >>> > > > > > > > >>> > > > |_| > >>> > > > > > > (XEN) Xen version > 3.4.3-rc4-pre > >>> > > (kishore@localdomain) > >>> > > > (gcc > >>> > > > > version > >>> > > > > > 4.1.2 20080704 (Red > Hat 4.1.2-46)) > >>> Mon Mar > >>> > 15 > >>> > > 13:44:31 PDT > >>> > > > 2010 > >>> > > > > > > (XEN) Latest > ChangeSet: Tue Mar 09 > >>> > 18:15:52 2010 > >>> > > +0000 > >>> > > > > > 19924:6e72f8c3c017 > >>> > > > > > > (XEN) Command line: > >>> console=vga,com1 > >>> > > com1=115200,8n1 > >>> > > > msi=1 > >>> > > > > iommu=1 > >>> > > > > > > (XEN) Video > information: > >>> > > > > > > (XEN) VGA is text > mode 80x25, font > >>> 8x16 > >>> > > > > > > (XEN) VBE/DDC > methods: none; EDID > >>> > transfer time: > >>> > > 0 > >>> > > > seconds > >>> > > > > > > (XEN) EDID info > not retrieved > >>> because no > >>> > DDC > >>> > > retrieval > >>> > > > method > >>> > > > > > detected > >>> > > > > > > (XEN) Disc > information: > >>> > > > > > > (XEN) Found 1 MBR > signatures > >>> > > > > > > (XEN) Found 1 EDD > information > >>> structures > >>> > > > > > > (XEN) Xen-e820 RAM > map: > >>> > > > > > > (XEN) > 0000000000000000 - > >>> 000000000009d000 > >>> > > (usable) > >>> > > > > > > (XEN) > 000000000009d000 - > >>> 00000000000a0000 > >>> > > (reserved) > >>> > > > > > > (XEN) > 00000000000e0000 - > >>> 0000000000100000 > >>> > > (reserved) > >>> > > > > > > (XEN) > 0000000000100000 - > >>> 000000006d597000 > >>> > > (usable) > >>> > > > > > > (XEN) > 000000006d597000 - > >>> 000000006d686000 > >>> > > (reserved) > >>> > > > > > > (XEN) > 000000006d686000 - > >>> 000000006f598000 > >>> > > (usable) > >>> > > > > > > (XEN) > 000000006f598000 - > >>> 000000006f59a000 > >>> > > (reserved) > >>> > > > > > > (XEN) > 000000006f59a000 - > >>> 000000006f5af000 > >>> > (ACPI > >>> > > NVS) > >>> > > > > > > (XEN) > 000000006f5af000 - > >>> 000000006f5d9000 > >>> > > (reserved) > >>> > > > > > > (XEN) > 000000006f5d9000 - > >>> 000000006f5f9000 > >>> > (ACPI > >>> > > data) > >>> > > > > > > (XEN) > 000000006f5f9000 - > >>> 000000006f6df000 > >>> > (ACPI > >>> > > NVS) > >>> > > > > > > (XEN) > 000000006f6df000 - > >>> 000000006f700000 > >>> > (ACPI > >>> > > data) > >>> > > > > > > (XEN) > 000000006f700000 - > >>> 0000000080000000 > >>> > > (reserved) > >>> > > > > > > (XEN) > 00000000a0000000 - > >>> 00000000b0000000 > >>> > > (reserved) > >>> > > > > > > (XEN) > 00000000fc000000 - > >>> 00000000fd000000 > >>> > > (reserved) > >>> > > > > > > (XEN) > 00000000fed1c000 - > >>> 00000000fed20000 > >>> > > (reserved) > >>> > > > > > > (XEN) > 00000000ffc00000 - > >>> 0000000100000000 > >>> > > (reserved) > >>> > > > > > > (XEN) System RAM: > 1780MB > >>> (1823000kB) > >>> > > > > > > (XEN) ACPI: RSDP > 000F03F0, 0024 (r2 > >>> INTEL > >>> > ) > >>> > > > > > > (XEN) ACPI: XSDT > 6F6FE120, 0064 (r1 > >>> INTEL > >>> > THRLY > >>> > > > 0 > >>> > > > > > 1000013) > >>> > > > > > > (XEN) ACPI: FACP > 6F6FD000, 00F4 (r4 > >>> INTEL > >>> > THRLY > >>> > > > 0 > >>> > > > > MSFT > >>> > > > > > 100000D) > >>> > > > > > > (XEN) ACPI: DSDT > 6F6F5000, 74F1 (r2 > >>> INTEL > >>> > THRLY > >>> > > > 3 > >>> > > > > MSFT > >>> > > > > > 100000D) > >>> > > > > > > (XEN) ACPI: FACS > 6F5F9000, 0040 > >>> > > > > > > (XEN) ACPI: APIC > 6F6F4000, 01CC (r2 > >>> INTEL > >>> > THRLY > >>> > > > 0 > >>> > > > > MSFT > >>> > > > > > 100000D) > >>> > > > > > > (XEN) ACPI: MCFG > 6F6F3000, 003C (r1 > >>> INTEL > >>> > THRLY > >>> > > > 1 > >>> > > > > MSFT > >>> > > > > > 100000D) > >>> > > > > > > (XEN) ACPI: HPET > 6F6F2000, 0038 (r1 > >>> INTEL > >>> > THRLY > >>> > > > 1 > >>> > > > > MSFT > >>> > > > > > 100000D) > >>> > > > > > > (XEN) ACPI: SLIT > 6F6F1000, 0030 (r1 > >>> INTEL > >>> > THRLY > >>> > > > 1 > >>> > > > > MSFT > >>> > > > > > 100000D) > >>> > > > > > > (XEN) ACPI: WDDT > 6F6F0000, 0040 (r1 > >>> INTEL > >>> > THRLY > >>> > > > 0 > >>> > > > > MSFT > >>> > > > > > 100000D) > >>> > > > > > > (XEN) ACPI: SSDT > 6F5D9000, 1FDDC > >>> (r1 > >>> > INTEL SSDT > >>> > > PM > >>> > > > 4000 > >>> > > > > INTL > >>> > > > > > 20061109) > >>> > > > > > > (XEN) ACPI: DMAR > 6F6EE000, 01D0 (r1 > >>> INTEL > >>> > THRLY > >>> > > > 1 > >>> > > > > MSFT > >>> > > > > > 100000D) > >>> > > > > > > (XEN) Domain heap > initialised > >>> > > > > > > (XEN) Processor #0 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #2 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #4 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #16 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #18 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #20 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #1 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #3 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #5 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #17 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #19 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) Processor #21 > 6:12 APIC > >>> version 21 > >>> > > > > > > (XEN) IOAPIC[0]: > apic_id 8, version > >>> 32, > >>> > address > >>> > > > 0xfec00000, GSI > >>> > > > > 0-23 > >>> > > > > > > (XEN) IOAPIC[1]: > apic_id 9, version > >>> 32, > >>> > address > >>> > > > 0xfec90000, GSI > >>> > > > > 24-47 > >>> > > > > > > (XEN) Enabling APIC > mode: Phys. > >>> Using 2 > >>> > I/O > >>> > > APICs > >>> > > > > > > (XEN) Intel VT-d > DMAR tables have > >>> been > >>> > parsed. > >>> > > > > > > (XEN) Using > scheduler: SMP Credit > >>> > Scheduler > >>> > > (credit) > >>> > > > > > > (XEN) Detected > 3200.207 MHz > >>> processor. > >>> > > > > > > (XEN) VMX: > Supported advanced > >>> features: > >>> > > > > > > (XEN) - APIC MMIO > access > >>> virtualisation > >>> > > > > > > (XEN) - APIC TPR > shadow > >>> > > > > > > (XEN) - Extended > Page Tables (EPT) > >>> > > > > > > (XEN) - > Virtual-Processor > >>> Identifiers > >>> > (VPID) > >>> > > > > > > (XEN) - Virtual > NMI > >>> > > > > > > (XEN) - MSR > direct-access bitmap > >>> > > > > > > (XEN) VMX: EPT is > available. > >>> > > > > > > (XEN) VMX: VPID is > available. > >>> > > > > > > (XEN) HVM: VMX > enabled > >>> > > > > > > (XEN) HVM: Hardware > Assisted Paging > >>> > detected. > >>> > > > > > > (XEN) CPU0: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 1/2 eip > >>> 88000 > >>> > > > > > > (XEN) CPU1: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 2/4 eip > >>> 88000 > >>> > > > > > > (XEN) CPU2: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 3/16 eip > >>> 88000 > >>> > > > > > > (XEN) CPU3: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 4/18 eip > >>> 88000 > >>> > > > > > > (XEN) CPU4: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 5/20 eip > >>> 88000 > >>> > > > > > > (XEN) CPU5: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 6/1 eip > >>> 88000 > >>> > > > > > > (XEN) CPU6: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 7/3 eip > >>> 88000 > >>> > > > > > > (XEN) CPU7: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 8/5 eip > >>> 88000 > >>> > > > > > > (XEN) CPU8: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 9/17 eip > >>> 88000 > >>> > > > > > > (XEN) CPU9: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 10/19 eip > >>> 88000 > >>> > > > > > > (XEN) CPU10: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Booting > processor 11/21 eip > >>> 88000 > >>> > > > > > > (XEN) CPU11: Intel > Genuine Intel(R) > >>> CPU > >>> > > 000 > >>> > > > @ > >>> > > > > 3.20GHz > >>> > > > > > stepping 00 > >>> > > > > > > (XEN) Total of 12 > processors > >>> activated. > >>> > > > > > > (XEN) ENABLING > IO-APIC IRQs > >>> > > > > > > (XEN) -> Using > new ACK method > >>> > > > > > > (XEN) checking TSC > synchronization > >>> across > >>> > 12 > >>> > > CPUs: > >>> > > > passed. > >>> > > > > > > (XEN) Platform > timer is 14.318MHz > >>> HPET > >>> > > > > > > ?(XEN) Brought up > 12 CPUs > >>> > > > > > > (XEN) Intel VT-d > Snoop Control > >>> supported. > >>> > > > > > > (XEN) Intel VT-d > DMA Passthrough > >>> not > >>> > supported. > >>> > > > > > > (XEN) Intel VT-d > Queued > >>> Invalidation > >>> > supported. > >>> > > > > > > (XEN) Intel VT-d > Interrupt > >>> Remapping > >>> > supported. > >>> > > > > > > (XEN) I/O > virtualisation enabled > >>> > > > > > > (XEN) I/O > virtualisation for PV > >>> guests > >>> > disabled > >>> > > > > > > (XEN) xenoprof: > Initialization > >>> failed. > >>> > Intel > >>> > > processor > >>> > > > model 44 > >>> > > > > for P6 > >>> > > > > > class family is not > supported > >>> > > > > > > (XEN) *** LOADING > DOMAIN 0 *** > >>> > > > > > > (XEN) Xen kernel: > 64-bit, lsb, > >>> compat32 > >>> > > > > > > (XEN) Dom0 kernel: > 64-bit, PAE, > >>> lsb, > >>> > paddr > >>> > > 0x1000000 -> > >>> > > > > 0x26bb000 > >>> > > > > > > (XEN) PHYSICAL > MEMORY ARRANGEMENT: > >>> > > > > > > (XEN) Dom0 alloc.: > >>> > > 0000000064000000->0000000068000000 > >>> > > > > (404490 pages > >>> > > > > > to be allocated) > >>> > > > > > > (XEN) VIRTUAL > MEMORY ARRANGEMENT: > >>> > > > > > > (XEN) Loaded > kernel: > >>> > > ffffffff81000000->ffffffff826bb000 > >>> > > > > > > (XEN) Init. > ramdisk: > >>> > > ffffffff826bb000->ffffffff82d0d800 > >>> > > > > > > (XEN) Phys-Mach > map: > >>> > > ffffffff82d0e000->ffffffff83044050 > >>> > > > > > > (XEN) Start info: > >>> > > ffffffff83045000->ffffffff830454b4 > >>> > > > > > > (XEN) Page tables: > >>> > > ffffffff83046000->ffffffff83063000 > >>> > > > > > > (XEN) Boot stack: > >>> > > ffffffff83063000->ffffffff83064000 > >>> > > > > > > (XEN) TOTAL: > >>> > > ffffffff80000000->ffffffff83400000 > >>> > > > > > > (XEN) ENTRY > ADDRESS: > >>> ffffffff819c1200 > >>> > > > > > > (XEN) Dom0 has > maximum 12 VCPUs > >>> > > > > > > (XEN) Scrubbing > Free RAM: .done. > >>> > > > > > > (XEN) Xen trace > buffers: disabled > >>> > > > > > > (XEN) Std. > Loglevel: Errors and > >>> warnings > >>> > > > > > > (XEN) Guest > Loglevel: Nothing > >>> > (Rate-limited: > >>> > > Errors and > >>> > > > > warnings) > >>> > > > > > > (XEN) Xen is > relinquishing VGA > >>> console. > >>> > > > > > > (XEN) *** Serial > input -> DOM0 > >>> (type > >>> > 'CTRL-a' > >>> > > three > >>> > > > times to > >>> > > > > switch > >>> > > > > > input to Xen) > >>> > > > > > > (XEN) Freed 128kB > init memory. > >>> > > > > > > mapping kernel into > physical memory > >>> > > > > > > Xen: setup ISA > identity maps > >>> > > > > > > about to get > started... > >>> > > > > > > Initializing cgroup > subsys cpuset > >>> > > > > > > Initializing cgroup > subsys cpu > >>> > > > > > > Linux version > 2.6.32.9 > >>> > > (kishore@localhost.localdomain) > >>> > > > (gcc > >>> > > > > version > >>> > > > > > 4.1.2 20080704 (Red > Hat 4.1.2-46)) #1 > >>> SMP > >>> > Mon Mar > >>> > > 15 > >>> > > > 15:16:28 PDT > >>> > > > > 2010 > >>> > > > > > > Command line: ro > >>> > root=/dev/VolGroup01/LogVol00 > >>> > > > console=hvc0 > >>> > > > > > earlyprintk=xen > nomodeset > >>> > > > > > > KERNEL supported > cpus: > >>> > > > > > > Intel > GenuineIntel > >>> > > > > > > AMD AuthenticAMD > >>> > > > > > > Centaur > CentaurHauls > >>> > > > > > > BIOS-provided > physical RAM map: > >>> > > > > > > Xen: > 0000000000000000 - > >>> 000000000009d000 > >>> > > (usable) > >>> > > > > > > Xen: > 000000000009d000 - > >>> 0000000000100000 > >>> > > (reserved) > >>> > > > > > > Xen: > 0000000000100000 - > >>> 0000000066c0a000 > >>> > > (usable) > >>> > > > > > > Xen: > 000000006d597000 - > >>> 000000006d686000 > >>> > > (reserved) > >>> > > > > > > Xen: > 000000006f598000 - > >>> 000000006f59a000 > >>> > > (reserved) > >>> > > > > > > Xen: > 000000006f59a000 - > >>> 000000006f5af000 > >>> > (ACPI > >>> > > NVS) > >>> > > > > > > Xen: > 000000006f5af000 - > >>> 000000006f5d9000 > >>> > > (reserved) > >>> > > > > > > Xen: > 000000006f5d9000 - > >>> 000000006f5f9000 > >>> > (ACPI > >>> > > data) > >>> > > > > > > Xen: > 000000006f5f9000 - > >>> 000000006f6df000 > >>> > (ACPI > >>> > > NVS) > >>> > > > > > > Xen: > 000000006f6df000 - > >>> 000000006f700000 > >>> > (ACPI > >>> > > data) > >>> > > > > > > Xen: > 000000006f700000 - > >>> 0000000080000000 > >>> > > (reserved) > >>> > > > > > > Xen: > 00000000a0000000 - > >>> 00000000b0000000 > >>> > > (reserved) > >>> > > > > > > Xen: > 00000000fc000000 - > >>> 00000000fd000000 > >>> > > (reserved) > >>> > > > > > > Xen: > 00000000fed1c000 - > >>> 00000000fed20000 > >>> > > (reserved) > >>> > > > > > > Xen: > 00000000ffc00000 - > >>> 0000000100000000 > >>> > > (reserved) > >>> > > > > > > bootconsole > [xenboot0] enabled > >>> > > > > > > DMI 2.4 present. > >>> > > > > > > last_pfn = 0x66c0a > max_arch_pfn = > >>> > 0x400000000 > >>> > > > > > > > init_memory_mapping: > >>> > > 0000000000000000-0000000066c0a000 > >>> > > > > > > RAMDISK: 026bb000 - > 02d0d800 > >>> > > > > > > ACPI: RSDP > 00000000000f03f0 00024 > >>> (v02 > >>> > INTEL ) > >>> > > > > > > ACPI: XSDT > 000000006f6fe120 00064 > >>> (v01 > >>> > INTEL > >>> > > THRLY > >>> > > > 00000000 > >>> > > > > > 01000013) > >>> > > > > > > ACPI: FACP > 000000006f6fd000 000F4 > >>> (v04 > >>> > INTEL > >>> > > THRLY > >>> > > > 00000000 > >>> > > > > MSFT > >>> > > > > > 0100000D) > >>> > > > > > > ACPI: DSDT > 000000006f6f5000 074F1 > >>> (v02 > >>> > INTEL > >>> > > THRLY > >>> > > > 00000003 > >>> > > > > MSFT > >>> > > > > > 0100000D) > >>> > > > > > > ACPI: FACS > 000000006f5f9000 00040 > >>> > > > > > > ACPI: APIC > 000000006f6f4000 001CC > >>> (v02 > >>> > INTEL > >>> > > THRLY > >>> > > > 00000000 > >>> > > > > MSFT > >>> > > > > > 0100000D) > >>> > > > > > > ACPI: MCFG > 000000006f6f3000 0003C > >>> (v01 > >>> > INTEL > >>> > > THRLY > >>> > > > 00000001 > >>> > > > > MSFT > >>> > > > > > 0100000D) > >>> > > > > > > ACPI: HPET > 000000006f6f2000 00038 > >>> (v01 > >>> > INTEL > >>> > > THRLY > >>> > > > 00000001 > >>> > > > > MSFT > >>> > > > > > 0100000D) > >>> > > > > > > ACPI: SLIT > 000000006f6f1000 00030 > >>> (v01 > >>> > INTEL > >>> > > THRLY > >>> > > > 00000001 > >>> > > > > MSFT > >>> > > > > > 0100000D) > >>> > > > > > > ACPI: WDDT > 000000006f6f0000 00040 > >>> (v01 > >>> > INTEL > >>> > > THRLY > >>> > > > 00000000 > >>> > > > > MSFT > >>> > > > > > 0100000D) > >>> > > > > > > ACPI: SSDT > 000000006f5d9000 1FDDC > >>> (v01 > >>> > INTEL > >>> > > SSDT PM > >>> > > > 00004000 > >>> > > > > INTL > >>> > > > > > 20061109) > >>> > > > > > > ACPI: > 000000006f6ee000 001D0 > >>> (v01 > >>> > INTEL > >>> > > THRLY > >>> > > > 00000001 > >>> > > > > MSFT > >>> > > > > > 0100000D) > >>> > > > > > > No NUMA > configuration found > >>> > > > > > > Faking a node at > >>> > > 0000000000000000-0000000066c0a000 > >>> > > > > > > Bootmem setup node > 0 > >>> > > 0000000000000000-0000000066c0a000 > >>> > > > > > > NODE_DATA > [0000000000008000 - > >>> > 000000000001ffff] > >>> > > > > > > bootmap > [0000000000020000 - > >>> > 000000000002cd87] > >>> > > pages d > >>> > > > > > > (9 early > reservations) ==> bootmem > >>> > [0000000000 - > >>> > > > 0066c0a000] > >>> > > > > > > #0 [0000000000 - > 0000001000] > >>> BIOS data > >>> > page > >>> > > ==> > >>> > > > [0000000000 > >>> > > > > - > >>> > > > > > 0000001000] > >>> > > > > > > #1 [0003046000 - > 0003063000] > >>> XEN > >>> > PAGETABLES > >>> > > ==> > >>> > > > [0003046000 > >>> > > > > - > >>> > > > > > 0003063000] > >>> > > > > > > #2 [0000006000 - > 0000008000] > >>> > TRAMPOLINE > >>> > > ==> > >>> > > > [0000006000 > >>> > > > > - > >>> > > > > > 0000008000] > >>> > > > > > > #3 [0001000000 - > 000269ae98] > >>> TEXT > >>> > DATA BSS > >>> > > ==> > >>> > > > [0001000000 > >>> > > > > - > >>> > > > > > 000269ae98] > >>> > > > > > > #4 [00026bb000 - > 0002d0d800] > >>> > RAMDISK > >>> > > ==> > >>> > > > [00026bb000 > >>> > > > > - > >>> > > > > > 0002d0d800] > >>> > > > > > > #5 [0002d0e000 - > 0003046000] > >>> XEN START > >>> > INFO > >>> > > ==> > >>> > > > [0002d0e000 > >>> > > > > - > >>> > > > > > 0003046000] > >>> > > > > > > #6 [000269b000 - > 000269b011] > >>> > BRK > >>> > > ==> > >>> > > > [000269b000 > >>> > > > > - > >>> > > > > > 000269b011] > >>> > > > > > > #7 [0000100000 - > 000041a000] > >>> > PGTABLE > >>> > > ==> > >>> > > > [0000100000 > >>> > > > > - > >>> > > > > > 000041a000] > >>> > > > > > > #8 [0000001000 - > 0000001030] > >>> ACPI > >>> > SLIT > >>> > > ==> > >>> > > > [0000001000 > >>> > > > > - > >>> > > > > > 0000001030] > >>> > > > > > > found SMP MP-table > at > >>> [ffff8800000fd750] > >>> > fd750 > >>> > > > > > > Zone PFN ranges: > >>> > > > > > > DMA > 0x00000000 -> 0x00001000 > >>> > > > > > > DMA32 > 0x00001000 -> 0x00100000 > >>> > > > > > > Normal > 0x00100000 -> 0x00100000 > >>> > > > > > > Movable zone start > PFN for each > >>> node > >>> > > > > > > early_node_map[2] > active PFN ranges > >>> > > > > > > 0: 0x00000000 > -> 0x0000009d > >>> > > > > > > 0: 0x00000100 > -> 0x00066c0a > >>> > > > > > > ACPI: PM-Timer IO > Port: 0x408 > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x00] > >>> lapic_id[0x00] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x01] > >>> lapic_id[0x02] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x02] > >>> lapic_id[0x04] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x03] > >>> lapic_id[0x10] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x04] > >>> lapic_id[0x12] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x05] > >>> lapic_id[0x14] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x06] > >>> lapic_id[0x01] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x07] > >>> lapic_id[0x03] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x08] > >>> lapic_id[0x05] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x09] > >>> lapic_id[0x11] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x0a] > >>> lapic_id[0x13] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x0b] > >>> lapic_id[0x15] > >>> > > enabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x0c] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x0d] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x0e] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x0f] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x10] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x11] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x12] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x13] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x14] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x15] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x16] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC > (acpi_id[0x17] > >>> lapic_id[0xff] > >>> > > disabled) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x00] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x01] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x02] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x03] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x04] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x05] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x06] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x07] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x08] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x09] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x0a] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x0b] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x0c] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x0d] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x0e] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x0f] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x10] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x11] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x12] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x13] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x14] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x15] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x16] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: LAPIC_NMI > (acpi_id[0x17] high > >>> level > >>> > > lint[0x1]) > >>> > > > > > > ACPI: IOAPIC > (id[0x08] > >>> address[0xfec00000] > >>> > > gsi_base[0]) > >>> > > > > > > IOAPIC[0]: apic_id > 8, version 0, > >>> address > >>> > > 0xfec00000, GSI > >>> > > > 0-0 > >>> > > > > > > ACPI: IOAPIC > (id[0x09] > >>> address[0xfec90000] > >>> > > gsi_base[24]) > >>> > > > > > > IOAPIC[1]: apic_id > 9, version 0, > >>> address > >>> > > 0xfec90000, GSI > >>> > > > 24-24 > >>> > > > > > > ACPI: INT_SRC_OVR > (bus 0 bus_irq 0 > >>> > global_irq 2 > >>> > > dfl dfl) > >>> > > > > > > ERROR: Unable to > locate IOAPIC for > >>> GSI 2 > >>> > > > > > > ACPI: INT_SRC_OVR > (bus 0 bus_irq 9 > >>> > global_irq 9 > >>> > > high > >>> > > > level) > >>> > > > > > > ERROR: Unable to > locate IOAPIC for > >>> GSI 9 > >>> > > > > > > Using ACPI (MADT) > for SMP > >>> configuration > >>> > > information > >>> > > > > > > ACPI: HPET id: > 0x8086a401 base: > >>> 0xfed00000 > >>> > > > > > > SMP: Allowing 12 > CPUs, 0 hotplug > >>> CPUs > >>> > > > > > > PM: Registered > nosave memory: > >>> > 000000000009d000 - > >>> > > > > 0000000000100000 > >>> > > > > > > Allocating PCI > resources starting > >>> at > >>> > b0000000 > >>> > > (gap: > >>> > > > > b0000000:4c000000) > >>> > > > > > > Booting > paravirtualized kernel on > >>> Xen > >>> > > > > > > Xen version: > 3.4.3-rc4-pre > >>> (preserve-AD) > >>> > (dom0) > >>> > > > > > > NR_CPUS:512 > nr_cpumask_bits:512 > >>> > nr_cpu_ids:12 > >>> > > > nr_node_ids:1 > >>> > > > > > > PERCPU: Embedded > 478 pages/cpu > >>> > @ffff880005ebc000 > >>> > > > s1928024 r8192 > >>> > > > > d21672 > >>> > > > > > u1957888 > >>> > > > > > > pcpu-alloc: > s1928024 r8192 d21672 > >>> u1957888 > >>> > > > alloc=478*4096 > >>> > > > > > > pcpu-alloc: [0] 00 > [0] 01 [0] 02 > >>> [0] 03 > >>> > [0] 04 > >>> > > [0] 05 > >>> > > > [0] 06 > >>> > > > > [0] 07 > >>> > > > > > > pcpu-alloc: [0] 08 > [0] 09 [0] 10 > >>> [0] 11 > >>> > > > > > > Xen: using > vcpu_info placement > >>> > > > > > > Built 1 zonelists > in Node order, > >>> mobility > >>> > > grouping on. > >>> > > > Total > >>> > > > > pages: > >>> > > > > > 409291 > >>> > > > > > > Policy zone: DMA32 > >>> > > > > > > Kernel command > line: ro > >>> > > root=/dev/VolGroup01/LogVol00 > >>> > > > > console=hvc0 > >>> > > > > > earlyprintk=xen > nomodeset > >>> > > > > > > PID hash table > entries: 4096 > >>> (order: 3, > >>> > 32768 > >>> > > bytes) > >>> > > > > > > Initializing CPU#0 > >>> > > > > > > DMA: Placing 64MB > software IO TLB > >>> between > >>> > > > ffff880007525000 - > >>> > > > > > ffff88000b525000 > >>> > > > > > > DMA: software IO > TLB at phys > >>> 0x7525000 - > >>> > > 0xb525000 > >>> > > > > > > xen_swiotlb_fixup: > >>> buf=ffff880007525000 > >>> > > size=67108864 > >>> > > > > > > xen_swiotlb_fixup: > >>> buf=ffff88000b585000 > >>> > > size=32768 > >>> > > > > > > Memory: > 1514268k/1683496k available > >>> (4654k > >>> > kernel > >>> > > code, > >>> > > > 396k > >>> > > > > absent, > >>> > > > > > 168832k reserved, > 3443k data, 3396k > >>> init) > >>> > > > > > > SLUB: Genslabs=14, > HWalign=64, > >>> Order=0-3, > >>> > > MinObjects=0, > >>> > > > > CPUs=12, > >>> > > > > > Nodes=1 > >>> > > > > > > Hierarchical RCU > implementation. > >>> > > > > > > NR_IRQS:4352 > nr_irqs:3072 > >>> > > > > > > Already setup the > GSI :0 > >>> > > > > > > Already setup the > GSI :1 > >>> > > > > > > Already setup the > GSI :2 > >>> > > > > > > Already setup the > GSI :3 > >>> > > > > > > Already setup the > GSI :4 > >>> > > > > > > Already setup the > GSI :5 > >>> > > > > > > Already setup the > GSI :6 > >>> > > > > > > Already setup the > GSI :7 > >>> > > > > > > Already setup the > GSI :8 > >>> > > > > > > Already setup the > GSI :9 > >>> > > > > > > Already setup the > GSI :10 > >>> > > > > > > Already setup the > GSI :11 > >>> > > > > > > Already setup the > GSI :12 > >>> > > > > > > Already setup the > GSI :13 > >>> > > > > > > Already setup the > GSI :14 > >>> > > > > > > Already setup the > GSI :15 > >>> > > > > > > ACPI: INT_SRC_OVR > (bus 0 bus_irq 0 > >>> > global_irq 2 > >>> > > dfl dfl) > >>> > > > > > > ACPI: INT_SRC_OVR > (bus 0 bus_irq 9 > >>> > global_irq 9 > >>> > > high > >>> > > > level) > >>> > > > > > > xen: sci override: > source_irq=9 > >>> > global_irq=9 > >>> > > trigger=c > >>> > > > > polarity=1 > >>> > > > > > > xen_allocate_pirq: > returning irq 9 > >>> for gsi > >>> > 9 > >>> > > > > > > Already setup the > GSI :9 > >>> > > > > > > xen: acpi sci 9 > >>> > > > > > > Console: colour > VGA+ 80x25 > >>> > > > > > > console [hvc0] > enabled, bootconsole > >>> > disabled > >>> > > console > >>> > > > [hvc0] > >>> > > > > enabled, > >>> > > > > > bootconsole disabled > >>> > > > > > > Lock dependency > validator: > >>> Copyright (c) > >>> > 2006 Red > >>> > > Hat, > >>> > > > Inc., > >>> > > > > Ingo > >>> > > > > > Molnar ... > MAX_LOCKDEP_SUBCLASSES: 8 > >>> ... > >>> > > MAX_LOCK_DEPTH: > >>> > > > > 48 > >>> > > > > > ... MAX_LOCKDEP_KEYS: > 8191 ... > >>> > > CLASSHASH_SIZE: > >>> > > > > 4096 ... > >>> > > > > > MAX_LOCKDEP_ENTRIES: > 16384 ... > >>> > > MAX_LOCKDEP_CHAINS: > >>> > > > 32768 > >>> > > > > ... > >>> > > > > > CHAINHASH_SIZE: > 16384 > >>> memory used > >>> > by lock > >>> > > > dependency > >>> > > > > info: > >>> > > > > > 6367 kB per > task-struct memory > >>> footprint: > >>> > 2688 > >>> > > bytes > >>> > > > allocated > >>> > > > > 17039360 > >>> > > > > > bytes of page_cgroup > please try > >>> > > 'cgroup_disable=memory' > >>> > > > option if > >>> > > > > you > >>> > > > > > don't want memory > cgroups installing > >>> Xen > >>> > timer for > >>> > > CPU 0 > >>> > > > Detected > >>> > > > > > 3200.206 MHz > processor. Calibrating > >>> delay > >>> > loop > >>> > > (skipped), > >>> > > > value > >>> > > > > > calculated using timer > frequency.. > >>> 6400.41 > >>> > BogoMIPS > >>> > > > (lpj=3200206) > >>> > > > > > Security Framework > initialized > >>> SELinux: > >>> > > Initializing. > >>> > > > Dentry > >>> > > > > cache hash > >>> > > > > > table entries: 262144 > (order: 9, > >>> 2097152 > >>> > bytes) > >>> > > > Inode-cache hash > >>> > > > > table > >>> > > > > > entries: 131072 > (order: 8, 1048576 > >>> bytes) > >>> > > Mount-cache hash > >>> > > > table > >>> > > > > > entries: 256 > Initializing cgroup > >>> subsys ns > >>> > > Initializing > >>> > > > cgroup > >>> > > > > subsys > >>> > > > > > cpuacct Initializing > cgroup subsys > >>> memory > >>> > > Initializing > >>> > > > cgroup > >>> > > > > subsys > >>> > > > > > devices Initializing > cgroup subsys > >>> freezer > >>> > > Initializing > >>> > > > cgroup > >>> > > > > subsys > >>> > > > > > net_cls CPU: L1 I > cache: 32K, L1 D > >>> cache: > >>> > 32K CPU: > >>> > > L2 > >>> > > > cache: 256K > >>> > > > > CPU: > >>> > > > > > L3 cache: 12288K CPU > 0/0x0 -> Node 0 > >>> CPU: > >>> > > Unsupported > >>> > > > number of > >>> > > > > siblings > >>> > > > > > 32 Performance Events: > unsupported p6 > >>> CPU > >>> > model 44 > >>> > > no PMU > >>> > > > driver, > >>> > > > > > software events only. > lockdep: fixing > >>> up > >>> > > alternatives. SMP > >>> > > > > alternatives: > >>> > > > > > switching to UP code > ACPI: Core > >>> revision > >>> > 20090903 > >>> > > ftrace: > >>> > > > > converting > >>> > > > > > mcount calls to 0f 1f > 44 00 00 > >>> ftrace: > >>> > allocating > >>> > > 27971 > >>> > > > entries > >>> > > > > in 110 > >>> > > > > > pages installing Xen > timer for CPU 1 > >>> > lockdep: > >>> > > fixing up > >>> > > > > alternatives. > >>> > > > > > SMP alternatives: > switching to SMP > >>> code > >>> > > Initializing CPU#1 > >>> > > > CPU: > >>> > > > > L1 I > >>> > > > > > cache: 32K, L1 D > cache: 32K CPU: L2 > >>> cache: > >>> > 256K > >>> > > CPU: L3 > >>> > > > cache: > >>> > > > > 12288K > >>> > > > > > CPU 1/0x0 -> Node 0 > CPU: Unsupported > >>> number > >>> > of > >>> > > siblings 32 > >>> > > > > installing > >>> > > > > > Xen timer for CPU 2 > Initializing > >>> CPU#2 CPU: > >>> > L1 I > >>> > > cache: > >>> > > > 32K, L1 D > >>> > > > > cache: > >>> > > > > > 32K CPU: L2 cache: > 256K CPU: L3 > >>> cache: > >>> > 12288K CPU > >>> > > 2/0x0 -> > >>> > > > Node 0 > >>> > > > > CPU: > >>> > > > > > Unsupported number of > siblings 32 > >>> installing > >>> > Xen > >>> > > timer for > >>> > > > CPU 3 > >>> > > > > > Initializing CPU#3 > CPU: L1 I cache: > >>> 32K, L1 > >>> > D > >>> > > cache: 32K > >>> > > > CPU: L2 > >>> > > > > cache: > >>> > > > > > 256K CPU: L3 cache: > 12288K CPU 3/0x0 > >>> -> Node > >>> > 0 CPU: > >>> > > > Unsupported > >>> > > > > number > >>> > > > > > of siblings 32 > installing Xen timer > >>> for CPU > >>> > 4 > >>> > > Initializing > >>> > > > CPU#4 > >>> > > > > CPU: L1 > >>> > > > > > I cache: 32K, L1 D > cache: 32K CPU: L2 > >>> cache: > >>> > 256K > >>> > > CPU: L3 > >>> > > > cache: > >>> > > > > 12288K > >>> > > > > > CPU 4/0x0 -> Node 0 > CPU: Unsupported > >>> number > >>> > of > >>> > > siblings 32 > >>> > > > > installing > >>> > > > > > Xen timer for CPU 5 > Initializing > >>> CPU#5 CPU: > >>> > L1 I > >>> > > cache: > >>> > > > 32K, L1 D > >>> > > > > cache: > >>> > > > > > 32K CPU: L2 cache: > 256K CPU: L3 > >>> cache: > >>> > 12288K CPU > >>> > > 5/0x0 -> > >>> > > > Node 0 > >>> > > > > CPU: > >>> > > > > > Unsupported number of > siblings 32 > >>> installing > >>> > Xen > >>> > > timer for > >>> > > > CPU 6 > >>> > > > > > Initializing CPU#6 > CPU: L1 I cache: > >>> 32K, L1 > >>> > D > >>> > > cache: 32K > >>> > > > CPU: L2 > >>> > > > > cache: > >>> > > > > > 256K CPU: L3 cache: > 12288K CPU 6/0x0 > >>> -> Node > >>> > 0 CPU: > >>> > > > Unsupported > >>> > > > > number > >>> > > > > > of siblings 32 > installing Xen timer > >>> for CPU > >>> > 7 > >>> > > Initializing > >>> > > > CPU#7 > >>> > > > > CPU: L1 > >>> > > > > > I cache: 32K, L1 D > cache: 32K CPU: L2 > >>> cache: > >>> > 256K > >>> > > CPU: L3 > >>> > > > cache: > >>> > > > > 12288K > >>> > > > > > CPU 7/0x0 -> Node 0 > CPU: Unsupported > >>> number > >>> > of > >>> > > siblings 32 > >>> > > > > installing > >>> > > > > > Xen timer for CPU 8 > Initializing > >>> CPU#8 CPU: > >>> > L1 I > >>> > > cache: > >>> > > > 32K, L1 D > >>> > > > > cache: > >>> > > > > > 32K CPU: L2 cache: > 256K CPU: L3 > >>> cache: > >>> > 12288K CPU > >>> > > 8/0x0 -> > >>> > > > Node 0 > >>> > > > > CPU: > >>> > > > > > Unsupported number of > siblings 32 > >>> installing > >>> > Xen > >>> > > timer for > >>> > > > CPU 9 > >>> > > > > > Initializing CPU#9 > CPU: L1 I cache: > >>> 32K, L1 > >>> > D > >>> > > cache: 32K > >>> > > > CPU: L2 > >>> > > > > cache: > >>> > > > > > 256K CPU: L3 cache: > 12288K CPU 9/0x0 > >>> -> Node > >>> > 0 CPU: > >>> > > > Unsupported > >>> > > > > number > >>> > > > > > of siblings 32 > installing Xen timer > >>> for CPU > >>> > 10 > >>> > > > Initializing > >>> > > > > CPU#10 CPU: > >>> > > > > > L1 I cache: 32K, L1 D > cache: 32K CPU: > >>> L2 > >>> > cache: > >>> > > 256K CPU: > >>> > > > L3 > >>> > > > > cache: > >>> > > > > > 12288K CPU 10/0x0 -> > Node 0 CPU: > >>> Unsupported > >>> > number > >>> > > of > >>> > > > siblings > >>> > > > > 32 > >>> > > > > > installing Xen timer > for CPU 11 > >>> Initializing > >>> > CPU#11 > >>> > > CPU: > >>> > > > L1 I > >>> > > > > cache: > >>> > > > > > 32K, L1 D cache: 32K > CPU: L2 cache: > >>> 256K > >>> > CPU: L3 > >>> > > cache: > >>> > > > 12288K > >>> > > > > CPU > >>> > > > > > 11/0x0 -> Node 0 CPU: > Unsupported > >>> number of > >>> > > siblings 32 > >>> > > > Brought > >>> > > > > up 12 > >>> > > > > > CPUs Grant table > initialized > >>> regulator: core > >>> > > version 0.5 > >>> > > > Time: > >>> > > > > 14:45:00 > >>> > > > > > Date: 03/16/10 NET: > Registered > >>> protocol > >>> > family 16 > >>> > > > > xenbus_probe_init ok > >>> > > > > > ACPI FADT declares the > system doesn't > >>> > support PCIe > >>> > > ASPM, > >>> > > > so > >>> > > > > disable it > >>> > > > > > ACPI: bus type pci > registered PCI: > >>> MCFG > >>> > > configuration 0: > >>> > > > base > >>> > > > > a0000000 > >>> > > > > > segment 0 buses 0 - > 255 PCI: MCFG > >>> area at > >>> > a0000000 > >>> > > > reserved in > >>> > > > > E820 PCI: > >>> > > > > > Using MMCONFIG at > a0000000 - afffffff > >>> PCI: > >>> > Using > >>> > > > configuration > >>> > > > > type 1 > >>> > > > > > for base access bio: > create slab > >>> <bio-0> at > >>> > 0 ACPI > >>> > > Error: > >>> > > > Field > >>> > > > > [CPB3] > >>> > > > > > at 96 exceeds Buffer > [NULL] size 64 > >>> (bits) > >>> > > > > (20090903/dsopcode-596) ACPI > >>> > > > > > Error (psparse-0537): > Method > >>> parse/execution > >>> > failed > >>> > > > [\_SB_._OSC] > >>> > > > > (Node > >>> > > > > > ffff880064e00c98), > >>> AE_AML_BUFFER_LIMIT ACPI: > >>> > > Interpreter > >>> > > > enabled > >>> > > > > ACPI: > >>> > > > > > (supports S0 S1 S3 S4 > S5) ACPI: Using > >>> IOAPIC > >>> > for > >>> > > interrupt > >>> > > > > routing ACPI > >>> > > > > > Warning: Incorrect > checksum in table > >>> [ ] > >>> > - 97, > >>> > > should > >>> > > > be DB > >>> > > > > > (20090903/tbutils-314) > ACPI: No dock > >>> devices > >>> > found. > >>> > > ACPI: > >>> > > > PCI > >>> > > > > Root > >>> > > > > > Bridge [PCI0] > (0000:00) pci > >>> 0000:00:01.0: > >>> > PME# > >>> > > supported > >>> > > > from D0 > >>> > > > > D3hot > >>> > > > > > D3cold pci > 0000:00:01.0: PME# > >>> disabled pci > >>> > > 0000:00:02.0: > >>> > > > PME# > >>> > > > > supported > >>> > > > > > from D0 D3hot D3cold > pci > >>> 0000:00:02.0: PME# > >>> > > disabled pci > >>> > > > > 0000:00:03.0: > >>> > > > > > PME# supported from D0 > D3hot D3cold > >>> pci > >>> > > 0000:00:03.0: PME# > >>> > > > > disabled pci > >>> > > > > > 0000:00:04.0: PME# > supported from D0 > >>> D3hot > >>> > D3cold > >>> > > pci > >>> > > > > 0000:00:04.0: PME# > >>> > > > > > disabled pci > 0000:00:05.0: PME# > >>> supported > >>> > from D0 > >>> > > D3hot > >>> > > > D3cold > >>> > > > > pci > >>> > > > > > 0000:00:05.0: PME# > disabled pci > >>> > 0000:00:06.0: PME# > >>> > > > supported from > >>> > > > > D0 > >>> > > > > > D3hot D3cold pci > 0000:00:06.0: PME# > >>> disabled > >>> > pci > >>> > > > 0000:00:07.0: > >>> > > > > PME# > >>> > > > > > supported from D0 > D3hot D3cold pci > >>> > 0000:00:07.0: > >>> > > PME# > >>> > > > disabled > >>> > > > > pci > >>> > > > > > 0000:00:08.0: PME# > supported from D0 > >>> D3hot > >>> > D3cold > >>> > > pci > >>> > > > > 0000:00:08.0: PME# > >>> > > > > > disabled pci > 0000:00:09.0: PME# > >>> supported > >>> > from D0 > >>> > > D3hot > >>> > > > D3cold > >>> > > > > pci > >>> > > > > > 0000:00:09.0: PME# > disabled pci > >>> > 0000:00:0a.0: PME# > >>> > > > supported from > >>> > > > > D0 > >>> > > > > > D3hot D3cold pci > 0000:00:0a.0: PME# > >>> disabled > >>> > pci > >>> > > > 0000:00:13.0: > >>> > > > > PME# > >>> > > > > > supported from D0 > D3hot D3cold pci > >>> > 0000:00:13.0: > >>> > > PME# > >>> > > > disabled > >>> > > > > pci > >>> > > > > > 0000:00:1a.7: PME# > supported from D0 > >>> D3hot > >>> > D3cold > >>> > > pci > >>> > > > > 0000:00:1a.7: PME# > >>> > > > > > disabled pci > 0000:00:1c.0: PME# > >>> supported > >>> > from D0 > >>> > > D3hot > >>> > > > D3cold > >>> > > > > pci > >>> > > > > > 0000:00:1c.0: PME# > disabled pci > >>> > 0000:00:1c.4: PME# > >>> > > > supported from > >>> > > > > D0 > >>> > > > > > D3hot D3cold pci > 0000:00:1c.4: PME# > >>> disabled > >>> > pci > >>> > > > 0000:00:1c.5: > >>> > > > > PME# > >>> > > > > > supported from D0 > D3hot D3cold pci > >>> > 0000:00:1c.5: > >>> > > PME# > >>> > > > disabled > >>> > > > > pci > >>> > > > > > 0000:00:1d.7: PME# > supported from D0 > >>> D3hot > >>> > D3cold > >>> > > pci > >>> > > > > 0000:00:1d.7: PME# > >>> > > > > > disabled pci > 0000:00:1f.0: quirk: > >>> region > >>> > 0400-047f > >>> > > claimed > >>> > > > by > >>> > > > > ICH6 > >>> > > > > > ACPI/GPIO/TCO pci > 0000:00:1f.0: > >>> quirk: > >>> > region > >>> > > 0500-053f > >>> > > > claimed > >>> > > > > by ICH6 > >>> > > > > > GPIO pci 0000:00:1f.0: > ICH7 LPC > >>> Generic IO > >>> > decode 1 > >>> > > PIO at > >>> > > > 0680 > >>> > > > > (mask > >>> > > > > > 000f) pci > 0000:00:1f.0: ICH7 LPC > >>> Generic IO > >>> > decode > >>> > > 2 PIO > >>> > > > at 0ca0 > >>> > > > > (mask > >>> > > > > > 000f) pci > 0000:00:1f.0: ICH7 LPC > >>> Generic IO > >>> > decode > >>> > > 3 PIO > >>> > > > at 0600 > >>> > > > > (mask > >>> > > > > > 001f) pci > 0000:00:1f.2: PME# > >>> supported from > >>> > D3hot > >>> > > pci > >>> > > > > 0000:00:1f.2: PME# > >>> > > > > > disabled pci > 0000:01:00.0: PME# > >>> supported > >>> > from D0 > >>> > > D3hot > >>> > > > D3cold > >>> > > > > pci > >>> > > > > > 0000:01:00.0: PME# > disabled pci > >>> > 0000:01:00.1: PME# > >>> > > > supported from > >>> > > > > D0 > >>> > > > > > D3hot D3cold pci > 0000:01:00.1: PME# > >>> disabled > >>> > pci > >>> > > > 0000:0c:00.0: > >>> > > > > disabling > >>> > > > > > ASPM on pre-1.1 PCIe > device. You can > >>> enable > >>> > it > >>> > > with > >>> > > > > 'pcie_aspm=force' > >>> > > > > > pci 0000:00:1e.0: > transparent bridge > >>> ACPI: > >>> > PCI Root > >>> > > Bridge > >>> > > > [PCI1] > >>> > > > > > (0000:fe) ACPI: PCI > Root Bridge > >>> [PCI2] > >>> > (0000:ff) > >>> > > ACPI: PCI > >>> > > > > Interrupt > >>> > > > > > Link [LNKA] (IRQs 3 4 > 5 6 7 9 10 *11 > >>> 12 14 > >>> > 15) > >>> > > ACPI: PCI > >>> > > > > Interrupt Link > >>> > > > > > [LNKB] (IRQs 3 4 5 6 7 > 9 *10 11 12 14 > >>> 15) > >>> > ACPI: PCI > >>> > > > Interrupt > >>> > > > > Link > >>> > > > > > [LNKC] (IRQs 3 4 5 6 7 > *9 10 11 12 14 > >>> 15) > >>> > ACPI: PCI > >>> > > > Interrupt > >>> > > > > Link > >>> > > > > > [LNKD] (IRQs 3 4 *5 6 > 7 9 10 11 12 14 > >>> 15) > >>> > ACPI: PCI > >>> > > > Interrupt > >>> > > > > Link > >>> > > > > > [LNKE] (IRQs 3 4 5 6 7 > 9 10 11 12 14 > >>> 15) *0, > >>> > > disabled. > >>> > > > ACPI: PCI > >>> > > > > > Interrupt Link [LNKF] > (IRQs 3 4 5 6 7 > >>> 9 10 > >>> > *11 12 > >>> > > 14 15) > >>> > > > ACPI: > >>> > > > > PCI > >>> > > > > > Interrupt Link [LNKG] > (IRQs 3 4 5 6 7 > >>> 9 10 > >>> > 11 12 14 > >>> > > 15) > >>> > > > *0, > >>> > > > > disabled. > >>> > > > > > ACPI: PCI Interrupt > Link [LNKH] (IRQs > >>> 3 4 5 > >>> > 6 7 9 > >>> > > *10 11 > >>> > > > 12 14 > >>> > > > > 15) > >>> > > > > > > xenbus_probe_backend_init bus > >>> registered ok > >>> > > > > xenbus_probe_frontend_init > >>> > > > > > bus registered ok > xen_balloon: > >>> Initialising > >>> > balloon > >>> > > driver > >>> > > > with > >>> > > > > page > >>> > > > > > order 0. vgaarb: > device added: > >>> > > > > > > >>> > > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none > >>> > > > vgaarb: > >>> > > > > loaded > >>> > > > > > SCSI subsystem > initialized usbcore: > >>> > registered new > >>> > > > interface > >>> > > > > driver > >>> > > > > > usbfs usbcore: > registered new > >>> interface > >>> > driver hub > >>> > > > usbcore: > >>> > > > > registered > >>> > > > > > new device driver usb > PCI: Using ACPI > >>> for > >>> > IRQ > >>> > > routing > >>> > > > NetLabel: > >>> > > > > > Initializing NetLabel: > domain hash > >>> size = > >>> > 128 > >>> > > NetLabel: > >>> > > > > protocols = > >>> > > > > > UNLABELED CIPSOv4 > NetLabel: > >>> unlabeled > >>> > traffic > >>> > > allowed by > >>> > > > default > >>> > > > > > Switching to > clocksource xen kstop/0 > >>> used > >>> > greatest > >>> > > stack > >>> > > > depth: > >>> > > > > 6568 > >>> > > > > > bytes left kstop/1 > used greatest > >>> stack > >>> > depth: 6536 > >>> > > bytes > >>> > > > left > >>> > > > > pnp: PnP > >>> > > > > > ACPI init ACPI: bus > type pnp > >>> registered > >>> > > xen_allocate_pirq: > >>> > > > > returning irq > >>> > > > > > 8 for gsi 8 Already > setup the GSI :8 > >>> > > xen_allocate_pirq: > >>> > > > returning > >>> > > > > irq 13 > >>> > > > > > for gsi 13 Already > setup the GSI :13 > >>> pnp: > >>> > PnP ACPI: > >>> > > found > >>> > > > 13 > >>> > > > > devices > >>> > > > > > ACPI: ACPI bus type > pnp unregistered > >>> system > >>> > 00:07: > >>> > > ioport > >>> > > > range > >>> > > > > > 0x500-0x53f has been > reserved system > >>> 00:07: > >>> > ioport > >>> > > range > >>> > > > > 0x400-0x47f has > >>> > > > > > been reserved system > 00:07: ioport > >>> range > >>> > > 0x800-0x81f has > >>> > > > been > >>> > > > > reserved > >>> > > > > > system 00:07: ioport > range > >>> 0x2f8-0x2ff has > >>> > been > >>> > > reserved > >>> > > > system > >>> > > > > 00:07: > >>> > > > > > iomem range > 0xfed1c000-0xfed8bffe > >>> could not > >>> > be > >>> > > reserved > >>> > > > system > >>> > > > > 00:07: > >>> > > > > > iomem range > 0xff000000-0xffffffff > >>> could not > >>> > be > >>> > > reserved > >>> > > > system > >>> > > > > 00:07: > >>> > > > > > iomem range > 0xfee00000-0xfeefffff has > >>> been > >>> > reserved > >>> > > system > >>> > > > 00:07: > >>> > > > > iomem > >>> > > > > > range > 0xfe900000-0xfe90001f has been > >>> > reserved > >>> > > system > >>> > > > 00:07: iomem > >>> > > > > range > >>> > > > > > 0xfea00000-0xfea0001f > has been > >>> reserved > >>> > system > >>> > > 00:07: > >>> > > > iomem range > >>> > > > > > 0xfed1b000-0xfed1bfff > has been > >>> reserved pci > >>> > > 0000:0c:00.0: > >>> > > > BAR 6: > >>> > > > > no > >>> > > > > > parent found for of > device > >>> > [0xffff0000-0xffffffff] > >>> > > pci > >>> > > > > 0000:00:01.0: PCI > >>> > > > > > bridge, secondary bus > 0000:01 pci > >>> > 0000:00:01.0: > >>> > > IO > >>> > > > window: > >>> > > > > > 0x1000-0x1fff pci > 0000:00:01.0: MEM > >>> > window: > >>> > > > > 0xb1900000-0xb19fffff pci > >>> > > > > > 0000:00:01.0: > PREFETCH window: > >>> disabled > >>> > pci > >>> > > > 0000:00:02.0: PCI > >>> > > > > bridge, > >>> > > > > > secondary bus 0000:02 > pci > >>> 0000:00:02.0: IO > >>> > > window: > >>> > > > disabled pci > >>> > > > > > 0000:00:02.0: MEM > window: disabled > >>> pci > >>> > > 0000:00:02.0: > >>> > > > PREFETCH > >>> > > > > > window: disabled pci > 0000:00:03.0: > >>> PCI > >>> > bridge, > >>> > > secondary > >>> > > > bus > >>> > > > > 0000:03 pci > >>> > > > > > 0000:00:03.0: IO > window: disabled > >>> pci > >>> > > 0000:00:03.0: > >>> > > > MEM > >>> > > > > window: > >>> > > > > > disabled pci > 0000:00:03.0: PREFETCH > >>> > window: > >>> > > disabled pci > >>> > > > > 0000:00:04.0: > >>> > > > > > PCI bridge, secondary > bus 0000:04 pci > >>> > 0000:00:04.0: > >>> > > IO > >>> > > > window: > >>> > > > > > disabled pci > 0000:00:04.0: MEM > >>> window: > >>> > disabled > >>> > > pci > >>> > > > > 0000:00:04.0: > >>> > > > > > PREFETCH window: > disabled pci > >>> 0000:00:05.0: > >>> > PCI > >>> > > bridge, > >>> > > > secondary > >>> > > > > bus > >>> > > > > > 0000:05 pci > 0000:00:05.0: IO > >>> window: > >>> > disabled pci > >>> > > > 0000:00:05.0: > >>> > > > > MEM > >>> > > > > > window: disabled pci > 0000:00:05.0: > >>> > PREFETCH > >>> > > window: > >>> > > > disabled > >>> > > > > pci > >>> > > > > > 0000:00:06.0: PCI > bridge, secondary > >>> bus > >>> > 0000:06 pci > >>> > > > 0000:00:06.0: > >>> > > > > IO > >>> > > > > > window: disabled pci > 0000:00:06.0: > >>> MEM > >>> > window: > >>> > > disabled > >>> > > > pci > >>> > > > > > 0000:00:06.0: > PREFETCH window: > >>> disabled > >>> > pci > >>> > > > 0000:00:07.0: PCI > >>> > > > > bridge, > >>> > > > > > secondary bus 0000:07 > pci > >>> 0000:00:07.0: IO > >>> > > window: > >>> > > > disabled pci > >>> > > > > > 0000:00:07.0: MEM > window: disabled > >>> pci > >>> > > 0000:00:07.0: > >>> > > > PREFETCH > >>> > > > > > window: disabled pci > 0000:00:08.0: > >>> PCI > >>> > bridge, > >>> > > secondary > >>> > > > bus > >>> > > > > 0000:08 pci > >>> > > > > > 0000:00:08.0: IO > window: disabled > >>> pci > >>> > > 0000:00:08.0: > >>> > > > MEM > >>> > > > > window: > >>> > > > > > disabled pci > 0000:00:08.0: PREFETCH > >>> > window: > >>> > > disabled pci > >>> > > > > 0000:00:09.0: > >>> > > > > > PCI bridge, secondary > bus 0000:09 pci > >>> > 0000:00:09.0: > >>> > > IO > >>> > > > window: > >>> > > > > > 0x3000-0x3fff pci > 0000:00:09.0: MEM > >>> > window: > >>> > > > > 0xb1b00000-0xb1cfffff pci > >>> > > > > > 0000:00:09.0: > PREFETCH window: > >>> > > > > > 0x000000b1d00000-0x000000b1efffff pci > >>> > > > > > 0000:00:0a.0: PCI > bridge, secondary > >>> bus > >>> > 0000:0a pci > >>> > > > 0000:00:0a.0: > >>> > > > > IO > >>> > > > > > window: disabled pci > 0000:00:0a.0: > >>> MEM > >>> > window: > >>> > > disabled > >>> > > > pci > >>> > > > > > 0000:00:0a.0: > PREFETCH window: > >>> disabled > >>> > pci > >>> > > > 0000:00:1c.0: PCI > >>> > > > > bridge, > >>> > > > > > secondary bus 0000:0b > pci > >>> 0000:00:1c.0: IO > >>> > > window: > >>> > > > disabled pci > >>> > > > > > 0000:00:1c.0: MEM > window: disabled > >>> pci > >>> > > 0000:00:1c.0: > >>> > > > PREFETCH > >>> > > > > > window: disabled pci > 0000:00:1c.4: > >>> PCI > >>> > bridge, > >>> > > secondary > >>> > > > bus > >>> > > > > 0000:0c pci > >>> > > > > > 0000:00:1c.4: IO > window: disabled > >>> pci > >>> > > 0000:00:1c.4: > >>> > > > MEM > >>> > > > > window: > >>> > > > > > 0xb1000000-0xb18fffff > pci > >>> 0000:00:1c.4: > >>> > PREFETCH > >>> > > window: > >>> > > > > > > 0x000000b0000000-0x000000b0ffffff pci > >>> > 0000:00:1c.5: > >>> > > PCI > >>> > > > bridge, > >>> > > > > > secondary bus 0000:0d > pci > >>> 0000:00:1c.5: IO > >>> > > window: > >>> > > > disabled pci > >>> > > > > > 0000:00:1c.5: MEM > window: disabled > >>> pci > >>> > > 0000:00:1c.5: > >>> > > > PREFETCH > >>> > > > > > window: disabled pci > 0000:00:1e.0: > >>> PCI > >>> > bridge, > >>> > > secondary > >>> > > > bus > >>> > > > > 0000:0e pci > >>> > > > > > 0000:00:1e.0: IO > window: disabled > >>> pci > >>> > > 0000:00:1e.0: > >>> > > > MEM > >>> > > > > window: > >>> > > > > > disabled pci > 0000:00:1e.0: PREFETCH > >>> > window: > >>> > > disabled pci > >>> > > > > 0000:00:01.0: > >>> > > > > > PCI INT A -> GSI 28 > (level, low) -> > >>> IRQ 28 > >>> > pci > >>> > > > 0000:00:02.0: PCI > >>> > > > > INT A > >>> > > > > > -> GSI 29 (level, > low) -> IRQ 29 pci > >>> > 0000:00:03.0: > >>> > > PCI INT > >>> > > > A -> > >>> > > > > GSI 24 > >>> > > > > > (level, low) -> IRQ > 24 pci > >>> 0000:00:04.0: PCI > >>> > INT A > >>> > > -> GSI > >>> > > > 25 > >>> > > > > (level, > >>> > > > > > low) -> IRQ 25 pci > 0000:00:05.0: PCI > >>> INT A > >>> > -> GSI > >>> > > 26 > >>> > > > (level, low) > >>> > > > > -> IRQ > >>> > > > > > 26 pci 0000:00:06.0: > PCI INT A -> GSI > >>> 27 > >>> > (level, > >>> > > low) -> > >>> > > > IRQ 27 > >>> > > > > pci > >>> > > > > > 0000:00:07.0: PCI INT > A -> GSI 30 > >>> (level, > >>> > low) -> > >>> > > IRQ 30 > >>> > > > pci > >>> > > > > > 0000:00:08.0: PCI INT > A -> GSI 31 > >>> (level, > >>> > low) -> > >>> > > IRQ 31 > >>> > > > pci > >>> > > > > > 0000:00:09.0: PCI INT > A -> GSI 32 > >>> (level, > >>> > low) -> > >>> > > IRQ 32 > >>> > > > pci > >>> > > > > > 0000:00:0a.0: PCI INT > A -> GSI 33 > >>> (level, > >>> > low) -> > >>> > > IRQ 33 > >>> > > > pci > >>> > > > > > 0000:00:1c.0: PCI INT > A -> GSI 16 > >>> (level, > >>> > low) -> > >>> > > IRQ 16 > >>> > > > > > xen_allocate_pirq: > returning irq 16 > >>> for gsi > >>> > 16 > >>> > > Already > >>> > > > setup the > >>> > > > > GSI :16 > >>> > > > > > pci 0000:00:1c.4: PCI > INT A -> GSI 16 > >>> > (level, low) > >>> > > -> IRQ > >>> > > > 16 pci > >>> > > > > > 0000:00:1c.5: PCI INT > B -> GSI 17 > >>> (level, > >>> > low) -> > >>> > > IRQ 17 > >>> > > > NET: > >>> > > > > Registered > >>> > > > > > protocol family 2 IP > route cache hash > >>> table > >>> > > entries: 65536 > >>> > > > > (order: 7, > >>> > > > > > 524288 bytes) TCP > established hash > >>> table > >>> > entries: > >>> > > 262144 > >>> > > > (order: > >>> > > > > 10, > >>> > > > > > 4194304 bytes) TCP > bind hash table > >>> entries: > >>> > 65536 > >>> > > (order: > >>> > > > 10, > >>> > > > > 4718592 > >>> > > > > > bytes) TCP: Hash > tables configured > >>> > (established > >>> > > 262144 > >>> > > > bind > >>> > > > > 65536) TCP > >>> > > > > > reno registered NET: > Registered > >>> protocol > >>> > family 1 > >>> > > pci > >>> > > > > 0000:01:00.0: > >>> > > > > > Disabling L0s pci > 0000:01:00.1: > >>> Disabling > >>> > L0s > >>> > > Trying to > >>> > > > unpack > >>> > > > > rootfs > >>> > > > > > image as initramfs... > Freeing initrd > >>> memory: > >>> > 6474k > >>> > > freed > >>> > > > DMA-API: > >>> > > > > > preallocated 32768 > debug entries > >>> DMA-API: > >>> > debugging > >>> > > > enabled by > >>> > > > > kernel > >>> > > > > > config PCI-DMA: Using > software bounce > >>> > buffering for > >>> > > IO > >>> > > > (SWIOTLB) > >>> > > > > DMA: > >>> > > > > > Placing 64MB software > IO TLB between > >>> > > ffff880007525000 - > >>> > > > > ffff88000b525000 > >>> > > > > > DMA: software IO TLB > at phys > >>> 0x7525000 - > >>> > 0xb525000 > >>> > > audit: > >>> > > > > initializing > >>> > > > > > netlink socket > (disabled) type=2000 > >>> > > > audit(1268750702.035:1): > >>> > > > > initialized > >>> > > > > > HugeTLB registered 2 > MB page size, > >>> > pre-allocated 0 > >>> > > pages > >>> > > > VFS: > >>> > > > > Disk > >>> > > > > > quotas dquot_6.5.2 > Dquot-cache hash > >>> table > >>> > entries: > >>> > > 512 > >>> > > > (order 0, > >>> > > > > 4096 > >>> > > > > > bytes) msgmni has been > set to 2970 > >>> > cryptomgr_test > >>> > > used > >>> > > > greatest > >>> > > > > stack > >>> > > > > > depth: 5864 bytes left > cryptomgr_test > >>> used > >>> > greatest > >>> > > stack > >>> > > > depth: > >>> > > > > 5816 > >>> > > > > > bytes left alg: No > test for stdrng > >>> (krng) > >>> > Block > >>> > > layer SCSI > >>> > > > > generic (bsg) > >>> > > > > > driver version 0.4 > loaded (major 252) > >>> io > >>> > scheduler > >>> > > noop > >>> > > > > registered io > >>> > > > > > scheduler anticipatory > registered io > >>> > scheduler > >>> > > deadline > >>> > > > > registered io > >>> > > > > > scheduler cfq > registered (default) > >>> > pci_hotplug: PCI > >>> > > Hot > >>> > > > Plug PCI > >>> > > > > Core > >>> > > > > > version: 0.5 pciehp > >>> 0000:00:09.0:pcie04: HPC > >>> > > vendor_id > >>> > > > 8086 > >>> > > > > device_id > >>> > > > > > 3410 ss_vid 0 ss_did 0 > pciehp: PCI > >>> Express > >>> > Hot Plug > >>> > > > Controller > >>> > > > > Driver > >>> > > > > > version: 0.4 acpiphp: > ACPI Hot Plug > >>> PCI > >>> > Controller > >>> > > Driver > >>> > > > > version: 0.5 > >>> > > > > > acpiphp_glue: Slot 2 > already > >>> registered by > >>> > another > >>> > > hotplug > >>> > > > driver > >>> > > > > > acpiphp_glue: Slot 2 > already > >>> registered by > >>> > another > >>> > > hotplug > >>> > > > driver > >>> > > > > > acpiphp_glue: Slot 2 > already > >>> registered by > >>> > another > >>> > > hotplug > >>> > > > driver > >>> > > > > > acpiphp_glue: Slot 2 > already > >>> registered by > >>> > another > >>> > > hotplug > >>> > > > driver > >>> > > > > > acpiphp_glue: Slot 2 > already > >>> registered by > >>> > another > >>> > > hotplug > >>> > > > driver > >>> > > > > > acpiphp_glue: Slot 2 > already > >>> registered by > >>> > another > >>> > > hotplug > >>> > > > driver > >>> > > > > > acpiphp_glue: Slot 2 > already > >>> registered by > >>> > another > >>> > > hotplug > >>> > > > driver > >>> > > > > > acpiphp_glue: Slot 2 > already > >>> registered by > >>> > another > >>> > > hotplug > >>> > > > driver > >>> > > > > > pci-stub: invalid id > string "" input: > >>> Sleep > >>> > Button > >>> > > as > >>> > > > > > > >>> > > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 > >>> > > > ACPI: > >>> > > > > Sleep > >>> > > > > > Button [SLPB] input: > Power Button as > >>> > > > > > > >>> > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: > >>> > > Power > >>> > > > Button > >>> > > > > [PWRF] > >>> > > > > > registering netback > hpet_acpi_add: no > >>> > address or > >>> > > irqs in > >>> > > > _CRS > >>> > > > > > Non-volatile memory > driver v1.3 Linux > >>> > agpgart > >>> > > interface > >>> > > > v0.103 > >>> > > > > Serial: > >>> > > > > > 8250/16550 driver, 4 > ports, IRQ > >>> sharing > >>> > enabled > >>> > > > serial8250: ttyS1 > >>> > > > > at I/O > >>> > > > > > 0x2f8 (irq = 3) is a > 16550A brd: > >>> module > >>> > loaded > >>> > > loop: > >>> > > > module > >>> > > > > loaded > >>> > > > > > input: Macintosh mouse > button > >>> emulation as > >>> > > > > /devices/virtual/input/input2 > >>> > > > > > ahci 0000:00:1f.2: PCI > INT A -> GSI > >>> 19 > >>> > (level, low) > >>> > > -> IRQ > >>> > > > 19 > >>> > > > > ahci > >>> > > > > > 0000:00:1f.2: AHCI > 0001.0200 32 slots > >>> 6 > >>> > ports 3 > >>> > > Gbps 0x3f > >>> > > > impl > >>> > > > > SATA mode > >>> > > > > > ahci 0000:00:1f.2: > flags: 64bit ncq > >>> sntf pm > >>> > led clo > >>> > > pio > >>> > > > slum part > >>> > > > > ccc > >>> > > > > > ems scsi0 : ahci > scsi1 : ahci scsi2 > >>> : ahci > >>> > scsi3 : > >>> > > ahci > >>> > > > scsi4 : > >>> > > > > ahci > >>> > > > > > scsi5 : ahci ata1: > SATA max UDMA/133 > >>> > irq_stat > >>> > > 0x00400040, > >>> > > > > connection > >>> > > > > > status changed irq > 2996 ata2: SATA > >>> max > >>> > UDMA/133 > >>> > > abar > >>> > > > > m2048@0xb1a00000 > >>> > > > > > port 0xb1a00180 irq > 2996 ata3: SATA > >>> max > >>> > UDMA/133 > >>> > > abar > >>> > > > > m2048@0xb1a00000 > >>> > > > > > port 0xb1a00200 irq > 2996 ata4: SATA > >>> max > >>> > UDMA/133 > >>> > > abar > >>> > > > > m2048@0xb1a00000 > >>> > > > > > port 0xb1a00280 irq > 2996 ata5: SATA > >>> max > >>> > UDMA/133 > >>> > > abar > >>> > > > > m2048@0xb1a00000 > >>> > > > > > port 0xb1a00300 irq > 2996 ata6: SATA > >>> max > >>> > UDMA/133 > >>> > > abar > >>> > > > > m2048@0xb1a00000 > >>> > > > > > port 0xb1a00380 irq > 2996 Fixed MDIO > >>> Bus: > >>> > probed > >>> > > ehci_hcd: > >>> > > > USB 2.0 > >>> > > > > > 'Enhanced' Host > Controller (EHCI) > >>> Driver > >>> > ehci_hcd > >>> > > > 0000:00:1a.7: > >>> > > > > PCI INT > >>> > > > > > C -> GSI 18 (level, > low) -> IRQ 18 > >>> ehci_hcd > >>> > > 0000:00:1a.7: > >>> > > > EHCI > >>> > > > > Host > >>> > > > > > Controller ehci_hcd > 0000:00:1a.7: new > >>> USB > >>> > bus > >>> > > registered, > >>> > > > > assigned bus > >>> > > > > > number 1 ehci_hcd > 0000:00:1a.7: debug > >>> port 1 > >>> > > ehci_hcd > >>> > > > > 0000:00:1a.7: irq > >>> > > > > > 18, io mem 0xb1a02000 > ehci_hcd > >>> 0000:00:1a.7: > >>> > USB > >>> > > 2.0 > >>> > > > started, > >>> > > > > EHCI 1.00 > >>> > > > > > usb usb1: New USB > device found, > >>> > idVendor=1d6b, > >>> > > > idProduct=0002 usb > >>> > > > > usb1: > >>> > > > > > New USB device > strings: Mfr=3, > >>> Product=2, > >>> > > SerialNumber=1 > >>> > > > usb > >>> > > > > usb1: > >>> > > > > > Product: EHCI Host > Controller usb > >>> usb1: > >>> > > Manufacturer: > >>> > > > Linux > >>> > > > > 2.6.32.9 > >>> > > > > > ehci_hcd usb usb1: > SerialNumber: > >>> > 0000:00:1a.7 usb > >>> > > usb1: > >>> > > > > configuration #1 > >>> > > > > > chosen from 1 choice > hub 1-0:1.0: USB > >>> hub > >>> > found hub > >>> > > > 1-0:1.0: 6 > >>> > > > > ports > >>> > > > > > detected ehci_hcd > 0000:00:1d.7: PCI > >>> INT A -> > >>> > GSI 23 > >>> > > > (level, low) > >>> > > > > -> IRQ > >>> > > > > > 23 ehci_hcd > 0000:00:1d.7: EHCI Host > >>> > Controller > >>> > > ehci_hcd > >>> > > > > 0000:00:1d.7: > >>> > > > > > new USB bus > registered, assigned bus > >>> number > >>> > 2 > >>> > > ehci_hcd > >>> > > > > 0000:00:1d.7: > >>> > > > > > debug port 1 ehci_hcd > 0000:00:1d.7: > >>> irq 23, > >>> > io mem > >>> > > > 0xb1a01000 > >>> > > > > ehci_hcd > >>> > > > > > 0000:00:1d.7: USB 2.0 > started, EHCI > >>> 1.00 usb > >>> > usb2: > >>> > > New USB > >>> > > > device > >>> > > > > found, > >>> > > > > > idVendor=1d6b, > idProduct=0002 usb > >>> usb2: New > >>> > USB > >>> > > device > >>> > > > strings: > >>> > > > > Mfr=3, > >>> > > > > > Product=2, > SerialNumber=1 usb usb2: > >>> Product: > >>> > EHCI > >>> > > Host > >>> > > > Controller > >>> > > > > usb > >>> > > > > > usb2: Manufacturer: > Linux 2.6.32.9 > >>> ehci_hcd > >>> > usb > >>> > > usb2: > >>> > > > > SerialNumber: > >>> > > > > > 0000:00:1d.7 usb usb2: > configuration > >>> #1 > >>> > chosen from > >>> > > 1 > >>> > > > choice hub > >>> > > > > > 2-0:1.0: USB hub found > hub 2-0:1.0: 6 > >>> ports > >>> > > detected > >>> > > > ohci_hcd: > >>> > > > > USB 1.1 > >>> > > > > > 'Open' Host Controller > (OHCI) Driver > >>> > uhci_hcd: USB > >>> > > > Universal Host > >>> > > > > > Controller Interface > driver > >>> > xen_allocate_pirq: > >>> > > returning > >>> > > > irq 16 > >>> > > > > for gsi > >>> > > > > > 16 Already setup the > GSI :16 uhci_hcd > >>> > 0000:00:1a.0: > >>> > > PCI > >>> > > > INT A -> > >>> > > > > GSI 16 > >>> > > > > > (level, low) -> IRQ > 16 uhci_hcd > >>> > 0000:00:1a.0: UHCI > >>> > > Host > >>> > > > > Controller > >>> > > > > > uhci_hcd 0000:00:1a.0: > new USB bus > >>> > registered, > >>> > > assigned > >>> > > > bus > >>> > > > > number 3 > >>> > > > > > uhci_hcd 0000:00:1a.0: > irq 16, io > >>> base > >>> > 0x000020e0 > >>> > > usb > >>> > > > usb3: New > >>> > > > > USB > >>> > > > > > device found, > idVendor=1d6b, > >>> idProduct=0001 > >>> > usb > >>> > > usb3: New > >>> > > > USB > >>> > > > > device > >>> > > > > > strings: Mfr=3, > Product=2, > >>> SerialNumber=1 > >>> > usb usb3: > >>> > > > Product: UHCI > >>> > > > > Host > >>> > > > > > Controller usb usb3: > Manufacturer: > >>> Linux > >>> > 2.6.32.9 > >>> > > uhci_hcd > >>> > > > usb > >>> > > > > usb3: > >>> > > > > > SerialNumber: > 0000:00:1a.0 usb usb3: > >>> > configuration > >>> > > #1 > >>> > > > chosen from > >>> > > > > 1 > >>> > > > > > choice hub 3-0:1.0: > USB hub found hub > >>> > 3-0:1.0: 2 > >>> > > ports > >>> > > > detected > >>> > > > > uhci_hcd > >>> > > > > > 0000:00:1a.1: PCI INT > B -> GSI 21 > >>> (level, > >>> > low) -> > >>> > > IRQ 21 > >>> > > > uhci_hcd > >>> > > > > > 0000:00:1a.1: UHCI > Host Controller > >>> uhci_hcd > >>> > > 0000:00:1a.1: > >>> > > > new USB > >>> > > > > bus > >>> > > > > > registered, assigned > bus number 4 > >>> uhci_hcd > >>> > > 0000:00:1a.1: > >>> > > > irq 21, > >>> > > > > io base > >>> > > > > > 0x000020c0 usb usb4: > New USB device > >>> found, > >>> > > idVendor=1d6b, > >>> > > > > idProduct=0001 > >>> > > > > > usb usb4: New USB > device strings: > >>> Mfr=3, > >>> > Product=2, > >>> > > > > SerialNumber=1 usb > >>> > > > > > usb4: Product: UHCI > Host Controller > >>> usb > >>> > usb4: > >>> > > > Manufacturer: Linux > >>> > > > > > 2.6.32.9 uhci_hcd usb > usb4: > >>> SerialNumber: > >>> > > 0000:00:1a.1 usb > >>> > > > usb4: > >>> > > > > > configuration #1 > chosen from 1 choice > >>> hub > >>> > 4-0:1.0: > >>> > > USB hub > >>> > > > found > >>> > > > > hub > >>> > > > > > 4-0:1.0: 2 ports > detected > >>> xen_allocate_pirq: > >>> > > returning irq > >>> > > > 19 for > >>> > > > > gsi 19 > >>> > > > > > Already setup the GSI > :19 uhci_hcd > >>> > 0000:00:1a.2: > >>> > > PCI INT D > >>> > > > -> GSI > >>> > > > > 19 > >>> > > > > > (level, low) -> IRQ > 19 uhci_hcd > >>> > 0000:00:1a.2: UHCI > >>> > > Host > >>> > > > > Controller > >>> > > > > > uhci_hcd 0000:00:1a.2: > new USB bus > >>> > registered, > >>> > > assigned > >>> > > > bus > >>> > > > > number 5 > >>> > > > > > uhci_hcd 0000:00:1a.2: > irq 19, io > >>> base > >>> > 0x000020a0 > >>> > > usb > >>> > > > usb5: New > >>> > > > > USB > >>> > > > > > device found, > idVendor=1d6b, > >>> idProduct=0001 > >>> > usb > >>> > > usb5: New > >>> > > > USB > >>> > > > > device > >>> > > > > > strings: Mfr=3, > Product=2, > >>> SerialNumber=1 > >>> > usb usb5: > >>> > > > Product: UHCI > >>> > > > > Host > >>> > > > > > Controller usb usb5: > Manufacturer: > >>> Linux > >>> > 2.6.32.9 > >>> > > uhci_hcd > >>> > > > usb > >>> > > > > usb5: > >>> > > > > > SerialNumber: > 0000:00:1a.2 usb usb5: > >>> > configuration > >>> > > #1 > >>> > > > chosen from > >>> > > > > 1 > >>> > > > > > choice hub 5-0:1.0: > USB hub found hub > >>> > 5-0:1.0: 2 > >>> > > ports > >>> > > > detected > >>> > > > > > xen_allocate_pirq: > returning irq 23 > >>> for gsi > >>> > 23 > >>> > > Already > >>> > > > setup the > >>> > > > > GSI :23 > >>> > > > > > uhci_hcd 0000:00:1d.0: > PCI INT A -> > >>> GSI 23 > >>> > (level, > >>> > > low) -> > >>> > > > IRQ 23 > >>> > > > > > uhci_hcd 0000:00:1d.0: > UHCI Host > >>> Controller > >>> > > uhci_hcd > >>> > > > > 0000:00:1d.0: new > >>> > > > > > USB bus registered, > assigned bus > >>> number 6 > >>> > uhci_hcd > >>> > > > 0000:00:1d.0: > >>> > > > > irq 23, > >>> > > > > > io base 0x00002080 usb > usb6: New USB > >>> device > >>> > found, > >>> > > > idVendor=1d6b, > >>> > > > > > idProduct=0001 usb > usb6: New USB > >>> device > >>> > strings: > >>> > > Mfr=3, > >>> > > > > Product=2, > >>> > > > > > SerialNumber=1 usb > usb6: Product: > >>> UHCI Host > >>> > > Controller usb > >>> > > > usb6: > >>> > > > > > Manufacturer: Linux > 2.6.32.9 uhci_hcd > >>> usb > >>> > usb6: > >>> > > > SerialNumber: > >>> > > > > > 0000:00:1d.0 usb usb6: > configuration > >>> #1 > >>> > chosen from > >>> > > 1 > >>> > > > choice hub > >>> > > > > > 6-0:1.0: USB hub found > hub 6-0:1.0: 2 > >>> ports > >>> > > detected > >>> > > > > xen_allocate_pirq: > >>> > > > > > returning irq 19 for > gsi 19 Already > >>> setup > >>> > the GSI > >>> > > :19 > >>> > > > uhci_hcd > >>> > > > > > 0000:00:1d.1: PCI INT > B -> GSI 19 > >>> (level, > >>> > low) -> > >>> > > IRQ 19 > >>> > > > uhci_hcd > >>> > > > > > 0000:00:1d.1: UHCI > Host Controller > >>> uhci_hcd > >>> > > 0000:00:1d.1: > >>> > > > new USB > >>> > > > > bus > >>> > > > > > registered, assigned > bus number 7 > >>> uhci_hcd > >>> > > 0000:00:1d.1: > >>> > > > irq 19, > >>> > > > > io base > >>> > > > > > 0x00002060 usb usb7: > New USB device > >>> found, > >>> > > idVendor=1d6b, > >>> > > > > idProduct=0001 > >>> > > > > > usb usb7: New USB > device strings: > >>> Mfr=3, > >>> > Product=2, > >>> > > > > SerialNumber=1 usb > >>> > > > > > usb7: Product: UHCI > Host Controller > >>> usb > >>> > usb7: > >>> > > > Manufacturer: Linux > >>> > > > > > 2.6.32.9 uhci_hcd usb > usb7: > >>> SerialNumber: > >>> > > 0000:00:1d.1 usb > >>> > > > usb7: > >>> > > > > > configuration #1 > chosen from 1 choice > >>> hub > >>> > 7-0:1.0: > >>> > > USB hub > >>> > > > found > >>> > > > > hub > >>> > > > > > 7-0:1.0: 2 ports > detected > >>> xen_allocate_pirq: > >>> > > returning irq > >>> > > > 18 for > >>> > > > > gsi 18 > >>> > > > > > Already setup the GSI > :18 uhci_hcd > >>> > 0000:00:1d.2: > >>> > > PCI INT C > >>> > > > -> GSI > >>> > > > > 18 > >>> > > > > > (level, low) -> IRQ > 18 uhci_hcd > >>> > 0000:00:1d.2: UHCI > >>> > > Host > >>> > > > > Controller > >>> > > > > > uhci_hcd 0000:00:1d.2: > new USB bus > >>> > registered, > >>> > > assigned > >>> > > > bus > >>> > > > > number 8 > >>> > > > > > uhci_hcd 0000:00:1d.2: > irq 18, io > >>> base > >>> > 0x00002040 > >>> > > usb > >>> > > > usb8: New > >>> > > > > USB > >>> > > > > > device found, > idVendor=1d6b, > >>> idProduct=0001 > >>> > usb > >>> > > usb8: New > >>> > > > USB > >>> > > > > device > >>> > > > > > strings: Mfr=3, > Product=2, > >>> SerialNumber=1 > >>> > usb usb8: > >>> > > > Product: UHCI > >>> > > > > Host > >>> > > > > >>> > > > >>> > > References > >>> > > > >>> > > Visible links > >>> > > 1. mailto:[20][21][22]pasik@iki.fi > >>> > > 2. mailto:[21][22][23]pasik@iki.fi > >>> > > 3. mailto:[22][23][24]pasik@iki.fi > >>> > > 4. mailto:[23][24][25]pasik@iki.fi > >>> > > 5. mailto:[24][25][26]pasik@iki.fi > >>> > > 6. > >>> > > >>> > [25][26][27]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > > 7. > >>> > > >>> > [26][27][28]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > > 8. mailto:[27][28][29]pasik@iki.fi > >>> > > 9. > >>> > > >>> > [28][29][30]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > > 10. > >>> > > >>> > [29][30][31]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > > 11. mailto:[30][31][32]pasik@iki.fi > >>> > > 12. mailto:[31][32][33]pasik@iki.fi > >>> > > 13. > >>> > > >>> > [32][33][34]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > > 14. > >>> > > >>> > [33][34][35]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > > 15. mailto:[34][35][36]pasik@iki.fi > >>> > > 16. > >>> > > >>> > [35][36][37]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > > 17. > >>> > > >>> > [36][37][38]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > > 18. mailto:[37][38][39]pasik@iki.fi > >>> > > >>> > References > >>> > > >>> > Visible links > >>> > 1. mailto:[39][40]pasik@iki.fi > >>> > 2. mailto:[40][41]pasik@iki.fi > >>> > 3. mailto:[41][42]pasik@iki.fi > >>> > 4. mailto:[42][43]pasik@iki.fi > >>> > 5. mailto:[43][44]pasik@iki.fi > >>> > 6. mailto:[44][45]pasik@iki.fi > >>> > 7. > >>> > [45][46]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > 8. > >>> > [46][47]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > 9. mailto:[47][48]pasik@iki.fi > >>> > 10. > >>> > [48][49]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > 11. > >>> > [49][50]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > 12. mailto:[50][51]pasik@iki.fi > >>> > 13. mailto:[51][52]pasik@iki.fi > >>> > 14. > >>> > [52][53]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > 15. > >>> > [53][54]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > 16. mailto:[54][55]pasik@iki.fi > >>> > 17. > >>> > [55][56]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > 18. > >>> > [56][57]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > 19. mailto:[57][58]pasik@iki.fi > >>> > 20. mailto:[58][59]pasik@iki.fi > >>> > 21. mailto:[59][60]pasik@iki.fi > >>> > 22. mailto:[60][61]pasik@iki.fi > >>> > 23. mailto:[61][62]pasik@iki.fi > >>> > 24. mailto:[62][63]pasik@iki.fi > >>> > 25. > >>> > [63][64]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > 26. > >>> > [64][65]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > 27. mailto:[65][66]pasik@iki.fi > >>> > 28. > >>> > [66][67]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > 29. > >>> > [67][68]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > 30. mailto:[68][69]pasik@iki.fi > >>> > 31. mailto:[69][70]pasik@iki.fi > >>> > 32. > >>> > [70][71]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > 33. > >>> > [71][72]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > 34. mailto:[72][73]pasik@iki.fi > >>> > 35. > >>> > [73][74]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> > 36. > >>> > [74][75]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> > 37. mailto:[75][76]pasik@iki.fi > >>> > >>> References > >>> > >>> Visible links > >>> 1. mailto:[77]pasik@iki.fi > >>> 2. mailto:[78]pasik@iki.fi > >>> 3. mailto:[79]pasik@iki.fi > >>> 4. mailto:[80]pasik@iki.fi > >>> 5. mailto:[81]pasik@iki.fi > >>> 6. mailto:[82]pasik@iki.fi > >>> 7. mailto:[83]pasik@iki.fi > >>> 8. > [84]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 9. > [85]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 10. mailto:[86]pasik@iki.fi > >>> 11. > [87]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 12. > [88]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 13. mailto:[89]pasik@iki.fi > >>> 14. mailto:[90]pasik@iki.fi > >>> 15. > [91]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 16. > [92]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 17. mailto:[93]pasik@iki.fi > >>> 18. > [94]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 19. > [95]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 20. mailto:[96]pasik@iki.fi > >>> 21. mailto:[97]pasik@iki.fi > >>> 22. mailto:[98]pasik@iki.fi > >>> 23. mailto:[99]pasik@iki.fi > >>> 24. mailto:[100]pasik@iki.fi > >>> 25. mailto:[101]pasik@iki.fi > >>> 26. > [102]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 27. > [103]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 28. mailto:[104]pasik@iki.fi > >>> 29. > [105]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 30. > [106]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 31. mailto:[107]pasik@iki.fi > >>> 32. mailto:[108]pasik@iki.fi > >>> 33. > [109]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 34. > [110]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 35. mailto:[111]pasik@iki.fi > >>> 36. > [112]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 37. > [113]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 38. mailto:[114]pasik@iki.fi > >>> 39. mailto:[115]pasik@iki.fi > >>> 40. mailto:[116]pasik@iki.fi > >>> 41. mailto:[117]pasik@iki.fi > >>> 42. mailto:[118]pasik@iki.fi > >>> 43. mailto:[119]pasik@iki.fi > >>> 44. mailto:[120]pasik@iki.fi > >>> 45. > [121]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 46. > [122]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 47. mailto:[123]pasik@iki.fi > >>> 48. > [124]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 49. > [125]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 50. mailto:[126]pasik@iki.fi > >>> 51. mailto:[127]pasik@iki.fi > >>> 52. > [128]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 53. > [129]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 54. mailto:[130]pasik@iki.fi > >>> 55. > [131]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 56. > [132]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 57. mailto:[133]pasik@iki.fi > >>> 58. mailto:[134]pasik@iki.fi > >>> 59. mailto:[135]pasik@iki.fi > >>> 60. mailto:[136]pasik@iki.fi > >>> 61. mailto:[137]pasik@iki.fi > >>> 62. mailto:[138]pasik@iki.fi > >>> 63. > [139]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 64. > [140]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 65. mailto:[141]pasik@iki.fi > >>> 66. > [142]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 67. > [143]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 68. mailto:[144]pasik@iki.fi > >>> 69. mailto:[145]pasik@iki.fi > >>> 70. > [146]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 71. > [147]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 72. mailto:[148]pasik@iki.fi > >>> 73. > [149]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > >>> 74. > [150]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > >>> 75. mailto:[151]pasik@iki.fi > >>> > >> > >> > > > > References > > Visible links > 1. mailto:pasik@iki.fi > 2. mailto:pasik@iki.fi > 3. mailto:pasik@iki.fi > 4. mailto:pasik@iki.fi > 5. mailto:pasik@iki.fi > 6. mailto:pasik@iki.fi > 7. mailto:pasik@iki.fi > 8. mailto:pasik@iki.fi > 9. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 10. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 11. mailto:pasik@iki.fi > 12. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 13. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 14. mailto:pasik@iki.fi > 15. mailto:pasik@iki.fi > 16. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 17. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 18. mailto:pasik@iki.fi > 19. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 20. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 21. mailto:pasik@iki.fi > 22. mailto:pasik@iki.fi > 23. mailto:pasik@iki.fi > 24. mailto:pasik@iki.fi > 25. mailto:pasik@iki.fi > 26. mailto:pasik@iki.fi > 27. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 28. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 29. mailto:pasik@iki.fi > 30. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 31. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 32. mailto:pasik@iki.fi > 33. mailto:pasik@iki.fi > 34. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 35. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 36. mailto:pasik@iki.fi > 37. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 38. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 39. mailto:pasik@iki.fi > 40. mailto:pasik@iki.fi > 41. mailto:pasik@iki.fi > 42. mailto:pasik@iki.fi > 43. mailto:pasik@iki.fi > 44. mailto:pasik@iki.fi > 45. mailto:pasik@iki.fi > 46. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 47. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 48. mailto:pasik@iki.fi > 49. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 50. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 51. mailto:pasik@iki.fi > 52. mailto:pasik@iki.fi > 53. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 54. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 55. mailto:pasik@iki.fi > 56. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 57. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 58. mailto:pasik@iki.fi > 59. mailto:pasik@iki.fi > 60. mailto:pasik@iki.fi > 61. mailto:pasik@iki.fi > 62. mailto:pasik@iki.fi > 63. mailto:pasik@iki.fi > 64. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 65. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 66. mailto:pasik@iki.fi > 67. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 68. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 69. mailto:pasik@iki.fi > 70. mailto:pasik@iki.fi > 71. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 72. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 73. mailto:pasik@iki.fi > 74. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 75. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 76. mailto:pasik@iki.fi > 77. mailto:pasik@iki.fi > 78. mailto:pasik@iki.fi > 79. mailto:pasik@iki.fi > 80. mailto:pasik@iki.fi > 81. mailto:pasik@iki.fi > 82. mailto:pasik@iki.fi > 83. mailto:pasik@iki.fi > 84. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 85. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 86. mailto:pasik@iki.fi > 87. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 88. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 89. mailto:pasik@iki.fi > 90. mailto:pasik@iki.fi > 91. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 92. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 93. mailto:pasik@iki.fi > 94. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 95. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 96. mailto:pasik@iki.fi > 97. mailto:pasik@iki.fi > 98. mailto:pasik@iki.fi > 99. mailto:pasik@iki.fi > 100. mailto:pasik@iki.fi > 101. mailto:pasik@iki.fi > 102. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 103. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 104. mailto:pasik@iki.fi > 105. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 106. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 107. mailto:pasik@iki.fi > 108. mailto:pasik@iki.fi > 109. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 110. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 111. mailto:pasik@iki.fi > 112. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 113. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 114. mailto:pasik@iki.fi > 115. mailto:pasik@iki.fi > 116. mailto:pasik@iki.fi > 117. mailto:pasik@iki.fi > 118. mailto:pasik@iki.fi > 119. mailto:pasik@iki.fi > 120. mailto:pasik@iki.fi > 121. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 122. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 123. mailto:pasik@iki.fi > 124. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 125. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 126. mailto:pasik@iki.fi > 127. mailto:pasik@iki.fi > 128. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 129. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 130. mailto:pasik@iki.fi > 131. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 132. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 133. mailto:pasik@iki.fi > 134. mailto:pasik@iki.fi > 135. mailto:pasik@iki.fi > 136. mailto:pasik@iki.fi > 137. mailto:pasik@iki.fi > 138. mailto:pasik@iki.fi > 139. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 140. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 141. mailto:pasik@iki.fi > 142. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 143. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 144. mailto:pasik@iki.fi > 145. mailto:pasik@iki.fi > 146. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 147. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 148. mailto:pasik@iki.fi > 149. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 150. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 151. mailto:pasik@iki.fi ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: crash in print_all_ICs() 2010-03-19 20:03 ` Pasi Kärkkäinen @ 2010-03-22 20:23 ` kishore kumar 2010-03-22 20:31 ` Pasi Kärkkäinen 0 siblings, 1 reply; 32+ messages in thread From: kishore kumar @ 2010-03-22 20:23 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users [-- Attachment #1.1: Type: text/plain, Size: 211190 bytes --] xend was not running so I did below steps and rebooted. The system did not boot up. SO I removed the line added in /proc/fstab and again rebooted. Attached is the captured file. Can you please let me know what is going wrong again? step 1. I loaded the xen-evtchn.ko by insmod. step 2: And added the below line in /proc/fstab. none /proc/xen xenfs defaults 0 0 Thanks On Fri, Mar 19, 2010 at 1:03 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote: > On Fri, Mar 19, 2010 at 12:57:58PM -0700, kishore kumar wrote: > > Attached is the captured file. > > > > Now the machine booted up. :) 2.6.32.10 is booted. > > > > But I dont see xen up and running. > > > > Whe I open Virtual Machine Manager I dont see xen running. (ATTACHED > IS > > THE SCREEN SHOT). > > > > - Do you have /proc/xen (xenfs) mounted? > - Do you have xen-evtchn driver module loaded in dom0? > - Do you have xend running? > > Please see and read this wiki page: > http://wiki.xensource.com/xenwiki/XenParavirtOps > > It explains the other configurations you need to do for Xen/xend to > actually work. > > Anyway, the problem for you was wrong grub.conf root= option for the dom0 > kernel. > > -- Pasi > > > On Fri, Mar 19, 2010 at 12:05 PM, Pasi Kärkkäinen <[1]pasik@iki.fi> > wrote: > > > > On Fri, Mar 19, 2010 at 11:22:54AM -0700, Jeremy Fitzhardinge wrote: > > > On 03/19/2010 10:59 AM, Pasi Kärkkäinen wrote: > > >> On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar wrote: > > >> > > >>> Attached is the capture log after changing the grub.conf to > > >>> > > >>> ro root=/dev/VolGroup01/LogVol00 console=hvc0 > earlyprintk=xen > > nomodeset > > >>> initcall_debug debug swiotlb=force apic=debug loglevel=10 > > >>> > > >>> for the dom 0 kernel command line. > > >>> > > >>> > > >> Hmm, interesting. Now it seems to crash in a different place. > > >> > > >> Jeremy: Have you seen this one earlier? > > >> > > > > > > No, but it looks like the result of "apic=debug" on the kernel > command > > > line. That won't do anything useful (the kernel has no APICs, > they > > all > > > belong to Xen), and can only cause harm. As it appears to have > done. > > > > > > > Ok, my bad. > > > > So please remove the "apic=debug" from the dom0 kernel cmdline and > try > > again. > > It should look like this: > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen > nomodeset > > initcall_debug debug loglevel=10 > > > > -- Pasi > > > > > J > > > > > >> .... IRQ redirection table: > > >> NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: > > >> 00 000 0 0 0 0 0 0 0 00 > > >> IRQ to pin mappings: > > >> BUG: unable to handle kernel NULL pointer dereference at (null) > > >> IP: [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 > > >> PGD 0 > > >> Oops: 0000 [#1] SMP > > >> last sysfs file: > > >> CPU 0 > > >> Modules linked in: > > >> Pid: 1, comm: swapper Not tainted 2.6.32.10 #2 > > >> RIP: e030:[<ffffffff819bf0e0>] [<ffffffff819bf0e0>] > > print_all_ICs+0x487/0x500 > > >> RSP: e02b:ffff880064edbe20 EFLAGS: 00010286 > > >> RAX: ffffffff816ed2c0 RBX: 0000000000000000 RCX: 000000000f640f01 > > >> RDX: ffff880066808000 RSI: ffff880064edbd40 RDI: 0000000000000000 > > >> RBP: ffff880064edbea0 R08: 0000000000000002 R09: 0000000000000000 > > >> R10: 0000000000000000 R11: ffff880064edbce0 R12: 0000000000000000 > > >> R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 > > >> FS: 0000000000000000(0000) GS:ffff880005ec8000(0000) > > knlGS:0000000000000000 > > >> CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b > > >> CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002660 > > >> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > > >> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > > >> Process swapper (pid: 1, threadinfo ffff880064eda000, task > > ffff880064ee0000) > > >> Stack: > > >> ffff880000000000 ffffffff00000000 ffff880000000000 > ffffffff811ebee8 > > >> <0> ffff880064edbe60 0000000181083e7c 000000ff00000002 > > 0000000000000002 > > >> <0> ffff880000000000 ffffffff810846f0 ffffffff817ce660 > > 00000000291fd332 > > >> Call Trace: > > >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e > > >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93 > > >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 > > >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc > > >> [<ffffffff81013eaa>] child_rip+0xa/0x20 > > >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > > >> [<ffffffff81013810>] ? restore_args+0x0/0x30 > > >> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 > > >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20 > > >> Code: 45 b0 0f 8c 5b fd ff ff 48 c7 c7 34 40 60 81 31 c0 45 31 e4 > e8 > > 11 d5 69 ff 31 ff e8 67 b5 6f ff eb 5a 48 85 c0 74 4a 48 8b 58 > 40<48> > > 83 3b 00 74 40 44 89 e6 48 c7 c7 4d 40 60 81 31 c0 e8 e8 d4 > > >> RIP [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 > > >> RSP<ffff880064edbe20> > > >> CR2: 0000000000000000 > > >> ---[ end trace 0007ad9d59420718 ]--- > > >> swapper used greatest stack depth: 4168 bytes left > > >> Kernel panic - not syncing: Attempted to kill init! > > >> Pid: 1, comm: swapper Tainted: G D 2.6.32.10 #2 > > >> Call Trace: > > >> [<ffffffff8105b747>] panic+0xa5/0x167 > > >> [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf > > >> [<ffffffff8105f2b3>] ? do_exit+0x38a/0x701 > > >> [<ffffffff8100f43f>] ? xen_restore_fl_direct_end+0x0/0x1 > > >> [<ffffffff8108f823>] ? lock_release+0x179/0x184 > > >> [<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf > > >> [<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c > > >> [<ffffffff8105efa7>] do_exit+0x7e/0x701 > > >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef > > >> [<ffffffff8147764c>] oops_end+0xbf/0xc7 > > >> [<ffffffff81038a02>] no_context+0x1f1/0x200 > > >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef > > >> [<ffffffff81038c61>] __bad_area_nosemaphore+0x191/0x1b4 > > >> [<ffffffff8100f452>] ? check_events+0x12/0x20 > > >> [<ffffffff81038d0e>] bad_area_nosemaphore+0x13/0x15 > > >> [<ffffffff81478b20>] do_page_fault+0x16d/0x2a2 > > >> [<ffffffff814769d5>] page_fault+0x25/0x30 > > >> [<ffffffff819bf0e0>] ? print_all_ICs+0x487/0x500 > > >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e > > >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93 > > >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 > > >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc > > >> [<ffffffff81013eaa>] child_rip+0xa/0x20 > > >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > > >> [<ffffffff81013810>] ? restore_args+0x0/0x30 > > >> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 > > >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20 > > >> > > >> > > >> -- Pasi > > >> > > >> > > >> > > >>> > > >>> On Thu, Mar 18, 2010 at 2:27 PM, Pasi > > Kärkkäinen<[1][2]pasik@iki.fi> wrote: > > >>> > > >>> On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar > wrote: > > >>> > pvdisplay does not work in my RHEL machine. > > >>> > > > >>> > I did pvscan. > > >>> > below is the output. > > >>> > > > >>> > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free] > > >>> > > > >>> > Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no > VG: > > 0 [0 ] > > >>> > > > >>> > > >>> Ok so /dev/sda2 is the correct device holding the > VolGroup01. > > >>> > > >>> Looking at your latest capture.doc I see this: > > >>> > > >>> Command line: ro root=/dev/vg00/lv01 console=hvc0 > > earlyprintk=xen > > >>> nomodeset initcall_debug debug swiotlb=force apic=debug > > loglevel=10 > > >>> > > >>> So your root= parameter is wrong! Edit grub.conf and > replace > > it with the > > >>> actual root device: > > >>> root=/dev/VolGroup01/LogVol00 > > >>> > > >>> -- Pasi > > >>> > > >>> > On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen > > >>> <[1][2][3]pasik@iki.fi> wrote: > > >>> > > > >>> > On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore > > kumar wrote: > > >>> > > I did the below steps for pvops dom 0 > kernel. > > >>> > > > > >>> > > make menuconfig > > >>> > > make bzImage > > >>> > > make modules > > >>> > > make modules_install > > >>> > > cp -a .config /boot/config-2.6.32.10 > > >>> > > cp -a System.map /boot/System.map-2.6.32.10 > > >>> > > cp -a arch/x86/boot/bzImage > > /boot/vmlinuz-2.6.32.10 > > >>> > > /sbin/mkinitrd -f --builtin=ahci > > /boot/initrd-2.6.32.10.img > > >>> > 2.6.32.10 > > >>> > > I tried root=/dev/VolGroup01/LogVol00 . > > >>> > > > > >>> > > > >>> > Ok. > > >>> > > > >>> > Please run "pvdisplay" to see which actual > partition > > is the LVM > > >>> PV for > > >>> > your > > >>> > volume group. > > >>> > > > >>> > Also if you're running Fedora 12 you could try > > generating an > > >>> initrd > > >>> > image > > >>> > with dracut instead of mkinitrd. > > >>> > > > >>> > -- Pasi > > >>> > > > >>> > > > > >>> > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi > Kärkkäinen > > >>> > <[1][2][3][4]pasik@iki.fi> wrote: > > >>> > > > > >>> > > On Wed, Mar 17, 2010 at 03:20:13PM -0700, > > kishore kumar > > >>> wrote: > > >>> > > > Here is the output of df -h and cat > > /etc/fstab of my > > >>> > machine. > > >>> > > > > > >>> > > > > >>> > > Did you try both > > root=/dev/mapper/VolGroup01-LogVol00 and > > >>> > > root=/dev/VolGroup01/LogVol00 arguments > for > > the dom0 > > >>> kernel? > > >>> > > > > >>> > > How did you generate the initrd image for > the > > dom0 kernel? > > >>> > > > > >>> > > Anyway this sounds like a grub.conf or > initrd > > problem, not > > >>> Xen or > > >>> > pvops > > >>> > > dom0 kernel kernel problem. > > >>> > > > > >>> > > -- Pasi > > >>> > > > > >>> > > > Please let me know your thoughts. > > >>> > > > > > >>> > > > [root@localhost kishore]# df -h > > >>> > > > > > >>> > > > Filesystem Size Used Avail Use% > Mounted > > on > > >>> > > > > > >>> > > > /dev/mapper/VolGroup01-LogVol00 > > >>> > > > > > >>> > > > > 223G > > 29G 182G 14% > > >>> / > > >>> > > > > > >>> > > > /dev/sda1 99M 81M 13M 87% /boot > > >>> > > > > > >>> > > > tmpfs 757M 0 757M 0% /dev/shm > > >>> > > > > > >>> > > > [root@localhost kishore]# cat > /etc/fstab > > >>> > > > > > >>> > > > /dev/VolGroup01/LogVol00 / ext3 > defaults > > 1 1 > > >>> > > > > > >>> > > > LABEL=/boot /boot ext3 defaults 1 2 > > >>> > > > > > >>> > > > tmpfs /dev/shm tmpfs defaults 0 0 > > >>> > > > > > >>> > > > devpts /dev/pts devpts > gid=5,mode=620 0 > > 0 > > >>> > > > > > >>> > > > sysfs /sys sysfs defaults 0 0 > > >>> > > > > > >>> > > > proc /proc proc defaults 0 0 > > >>> > > > > > >>> > > > /dev/VolGroup01/LogVol01 swap swap > > defaults 0 0 > > >>> > > > > > >>> > > > [root@localhost kishore]# > > >>> > > > > > >>> > > > On Tue, Mar 16, 2010 at 4:18 PM, > Pasi > > Kärkkäinen > > >>> > > <[1][2][3][4][5]pasik@iki.fi> wrote: > > >>> > > > > > >>> > > > On Tue, Mar 16, 2010 at 03:40:46PM > > -0700, kishore > > >>> kumar > > >>> > wrote: > > >>> > > > > I am not sure. Can you > please > > let me know how > > >>> to > > >>> > check > > >>> > > this? any > > >>> > > > command > > >>> > > > > ?? > > >>> > > > > > >>> > > > well simple "df -h" will show it. > and > > also "cat > > >>> > /etc/fstab". > > >>> > > > You can also check it from your > grub > > >>> configuration.. from > > >>> > the > > >>> > > working > > >>> > > > baremetal (non-Xen) entry. > > >>> > > > > > >>> > > > -- Pasi > > >>> > > > > > > >>> > > > > On Tue, Mar 16, 2010 at 3:29 > PM, > > Pasi > > >>> Kärkkäinen > > >>> > > > <[1][2][3][4][5][6]pasik@iki.fi> > > wrote: > > >>> > > > > > > >>> > > > > On Tue, Mar 16, 2010 at > > 03:22:50PM -0700, > > >>> kishore > > >>> > kumar > > >>> > > wrote: > > >>> > > > > > attached is the log > > captured in with > > >>> the word > > >>> > > document . > > >>> > > > > > > > >>> > > > > > > >>> > > > > Scanning logical volumes > > >>> > > > > Reading all physical > volumes. > > This may > > >>> take a > > >>> > while... > > >>> > > > > Activating logical volumes > > >>> > > > > Volume group "VolGroup01" > not > > found > > >>> > > > > Trying to resume from > > >>> /dev/VolGroup01/LogVol01 > > >>> > > > > Unable to access resume > device > > >>> > (/dev/VolGroup01/LogVol01) > > >>> > > > > Creating root device. > > >>> > > > > Mounting root filesystem. > > >>> > > > > mount: could not find > > filesystem '/dev/root' > > >>> > > > > Setting up other > filesystems. > > >>> > > > > Setting up new root fs > > >>> > > > > setuproot: moving /dev > failed: > > No such file > > >>> or > > >>> > directory > > >>> > > > > no fstab.sys, mounting > > internal defaults > > >>> > > > > setuproot: error mounting > > /proc: No such > > >>> file or > > >>> > directory > > >>> > > > > setuproot: error mounting > > /sys: No such file > > >>> or > > >>> > directory > > >>> > > > > Switching to new root and > > running init. > > >>> > > > > unmounting old /dev > > >>> > > > > unmounting old /proc > > >>> > > > > unmounting old /sys > > >>> > > > > switchroot: mount failed: > No > > such file or > > >>> directory > > >>> > > > > init used greatest stack > > depth: 4088 bytes > > >>> left > > >>> > > > > Kernel panic - not > syncing: > > Attempted to > > >>> kill init! > > >>> > > > > > > >>> > > > > So it seems it gets all > the > > way to executing > > >>> the > > >>> > initrd > > >>> > > image, > > >>> > > > > which then fails to mount > the > > root fs. > > >>> > > > > > > >>> > > > > Earlier in the log: > > >>> > > > > ata1: SATA link up 3.0 > Gbps > > (SStatus 123 > > >>> SControl > > >>> > 300) > > >>> > > > > ata1.00: ATA-8: Hitachi > > HDT721025SLA380, > > >>> STBOA3AA, > > >>> > max > > >>> > > UDMA/133 > > >>> > > > > ata1.00: 488397168 > sectors, > > multi 0: LBA48 > > >>> NCQ > > >>> > (depth > > >>> > > 31/32), AA > > >>> > > > > ata1.00: configured for > > UDMA/133 > > >>> > > > > scsi 0:0:0:0: > Direct-Access > > ATA > > >>> Hitachi > > >>> > HDT72102 > > >>> > > STBO > > >>> > > > PQ: 0 > > >>> > > > > ANSI: 5 > > >>> > > > > sd 0:0:0:0: Attached scsi > > generic sg0 type 0 > > >>> > > > > sd 0:0:0:0: [sda] > 488397168 > > 512-byte logical > > >>> > blocks: (250 > > >>> > > GB/232 > > >>> > > > GiB) > > >>> > > > > sd 0:0:0:0: [sda] Write > > Protect is off > > >>> > > > > sd 0:0:0:0: [sda] Mode > Sense: > > 00 3a 00 00 > > >>> > > > > sd 0:0:0:0: [sda] Write > cache: > > enabled, read > > >>> cache: > > >>> > > enabled, > > >>> > > > doesn't > > >>> > > > > support DPO or FUA > > >>> > > > > sda: sda1 sda2 > > >>> > > > > sd 0:0:0:0: [sda] Attached > > SCSI disk > > >>> > > > > > > >>> > > > > so /dev/sda was detected. > Is > > your root lvm > > >>> volume > > >>> > on > > >>> > > /dev/sda ? > > >>> > > > > Is > /dev/VolGroup01/LogVol01 > > really your root > > >>> fs? > > >>> > > > > > > >>> > > > > -- Pasi > > >>> > > > > > > >>> > > > > > > > >>> > > > > > > > >>> > > > > > On Tue, Mar 16, 2010 > at > > 3:03 PM, Pasi > > >>> > Kärkkäinen > > >>> > > > > > > <[1][2][3][4][5][6][7]pasik@iki.fi> wrote: > > >>> > > > > > > > >>> > > > > > On Tue, Mar 16, > 2010 > > at 02:56:06PM > > >>> -0700, > > >>> > kishore > > >>> > > kumar > > >>> > > > wrote: > > >>> > > > > > > Please find > the > > attached log > > >>> file after > > >>> > fixing > > >>> > > the > > >>> > > > dom 0 > > >>> > > > > kernel cmd > > >>> > > > > > line > > >>> > > > > > > as below > > >>> > > > > > > > > >>> > > > > > > ro > > root=/dev/VolGroup01/LogVol00 > > >>> > console=hvc0 > > >>> > > > > earlyprintk=xen > > >>> > > > > > nomodeset > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > There's something > > wrong with the log, > > >>> the > > >>> > dom0 > > >>> > > kernel > > >>> > > > parts are > > >>> > > > > all on > > >>> > > > > > one line.. > > >>> > > > > > It's really > difficult > > to read it. > > >>> > > > > > > > >>> > > > > > -- Pasi > > >>> > > > > > > > >>> > > > > > > Thanks > > >>> > > > > > > > > >>> > > > > > > > > >>> > > > > > > On Tue, Mar > 16, > > 2010 at 2:29 PM, > > >>> Pasi > > >>> > > Kärkkäinen > > >>> > > > > > > > <[1][2][3][4][5][6][7][8]pasik@iki.fi> > > >>> wrote: > > >>> > > > > > > > > >>> > > > > > > On Tue, > Mar > > 16, 2010 at > > >>> 02:16:22PM > > >>> > -0700, > > >>> > > kishore > > >>> > > > kumar > > >>> > > > > wrote: > > >>> > > > > > > > I > did > > below steps. > > >>> > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > > I > > pulled DOM 0 kernel > > >>> from > > >>> > > > > > > > git > > clone > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > git://[1][2][3][4][5][6][7][8][9] > git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > > > > > > > > linux-2.6-xen > > >>> > > > > > > > > > >>> > > > > > > > cd > > linux-2.6-xen > > >>> > > > > > > > > > >>> > > > > > > > make > > clean > > >>> > > > > > > > > > >>> > > > > > > > cp > -a > > .config .config-old > > >>> > > > > > > > > > >>> > > > > > > > wget > -O > > .config > > >>> > > > > > > > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > [2][3][4][5][6][7][8][9][10] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > > > > > > > > >>> > > > > > > > make > > oldconfig > > >>> > > > > > > > > > >>> > > > > > > > make > > bzImage > > >>> > > > > > > > > > >>> > > > > > > > make > > modules > > >>> > > > > > > > > > >>> > > > > > > > make > > modules_install > > >>> > > > > > > > > > >>> > > > > > > > cp > -a > > .config > > >>> > /boot/config-2.6.32.9 > > >>> > > > > > > > > > >>> > > > > > > > cp > -a > > System.map > > >>> > > /boot/System.map-2.6.32.9 > > >>> > > > > > > > > > >>> > > > > > > > cp > -a > > >>> arch/x86/boot/bzImage > > >>> > > > /boot/vmlinuz-2.6.32.9 > > >>> > > > > > > > > > >>> > > > > > > > and > > modified the > > >>> grub.conf as > > >>> > below > > >>> > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > > > > Root(hd0,0) > > >>> > > > > > > > > > >>> > > > > > > > > kernel > > /xen.gz > > >>> console=vga,com1 > > >>> > > > com1=115200,8n1 > > >>> > > > > msi=1 > > >>> > > > > > iommu=1 > > >>> > > > > > > > > > >>> > > > > > > > > module > > /vmlinuz-2.6.32.9 > > >>> ro > > >>> > > > > > root=/dev/VolGroup01/LogVo100 > > >>> > > > > > rhgb > > >>> > > > > > > quiet > > >>> > > > > > > > > > >>> > > > > > > > > module > > >>> /initrd-2.6.32.9.img > > >>> > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > > and > > rebooted the machine. > > >>> Then > > >>> > It > > >>> > > booted with > > >>> > > > some > > >>> > > > > xen > > >>> > > > > > messages > > >>> > > > > > > and > > >>> > > > > > > > > stopped. > > Those were the > > >>> > messages > > >>> > > captured > > >>> > > > from > > >>> > > > > serial > > >>> > > > > > console. > > >>> > > > > > > > > > >>> > > > > > > > > Please > > let me know if I > > >>> did > > >>> > something > > >>> > > wrong > > >>> > > > here. > > >>> > > > > > > > > > >>> > > > > > > > > >>> > > > > > > Please fix > the > > kernel cmdline > > >>> based > > >>> > on my > > >>> > > earlier > > >>> > > > email, > > >>> > > > > and > > >>> > > > > > capture and > > >>> > > > > > > post the > > >>> > > > > > > serial > console > > log again! > > >>> > > > > > > > > >>> > > > > > > -- Pasi > > >>> > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > > On > Tue, > > Mar 16, 2010 at > > >>> 1:20 PM, > > >>> > Pasi > > >>> > > > Kärkkäinen > > >>> > > > > > > > > >>> <[3][4][5][6][7][8][9][10][11]pasik@iki.fi> > > >>> > wrote: > > >>> > > > > > > > > > >>> > > > > > > > On > > Tue, Mar 16, 2010 at > > >>> > 01:16:28PM > > >>> > > -0700, > > >>> > > > Jeremy > > >>> > > > > > Fitzhardinge > > >>> > > > > > > wrote: > > >>> > > > > > > > > > On > > 03/16/2010 12:48 > > >>> PM, Pasi > > >>> > > Kärkkäinen > > >>> > > > wrote: > > >>> > > > > > > > >> > On > > Tue, Mar 16, 2010 > > >>> at > > >>> > 09:43:44PM > > >>> > > +0200, > > >>> > > > Pasi > > >>> > > > > > Kärkkäinen > > >>> > > > > > > wrote: > > >>> > > > > > > > >> > > >>> > > > > > > > > >>> > > On Tue, Mar 16, > > >>> 2010 at > > >>> > > 10:32:17AM > > >>> > > > -0700, > > >>> > > > > kishore > > >>> > > > > > kumar > > >>> > > > > > > wrote: > > >>> > > > > > > > > >>> > > >>> > > > > > > > > >>>> > > Attached is > > >>> the > > >>> > output > > >>> > > captured > > >>> > > > from > > >>> > > > > serial > > >>> > > > > > console. > > >>> > > > > > > > > >>>> > > >>> > > > > > > > > >>>> > > Machine does > > >>> not boot > > >>> > after > > >>> > > > compiling xen > > >>> > > > > 3.4.3 > > >>> > > > > > with > > >>> > > > > > > pv_ops dom > > >>> > > > > > > > 0 > > kernel. > > >>> > > > > > > > > >>>> > > >>> > > > > > > > > >>>> > > Please let me > > >>> know > > >>> > what is > > >>> > > going > > >>> > > > wrong > > >>> > > > > here. > > >>> > > > > > > > > >>>> > > >>> > > > > > > > > >>>> > > >>> > > > > > > > > >>> > > Ok this looks like > > >>> a bug > > >>> > that is > > >>> > > already > > >>> > > > being > > >>> > > > > sorted > > >>> > > > > > out on > > >>> > > > > > > > > > xen-devel mailinglist. > > >>> > > > > > > > > >>> I > > added CC to > > >>> xen-devel. > > >>> > > > > > > > > >>> > > >>> > > > > > > > > >>> > > >>> > > > > > > > >> > > >>> > > > > > > > > > > >>> > > > > > > > > > > Those messages are > > >>> not a > > >>> > problem in > > >>> > > > themselves, > > >>> > > > > but the > > >>> > > > > > related > > >>> > > > > > > > > > problem > > >>> > > > > > > > > > is > > believed to be > > >>> fixed in > > >>> > current > > >>> > > > > xen/stable-2.6.32.x. > > >>> > > > > > It > > >>> > > > > > > looks like > > >>> > > > > > > > > > the > > output stops > > >>> there > > >>> > because the > > >>> > > Xen > > >>> > > > console > > >>> > > > > isn't set > > >>> > > > > > up > > >>> > > > > > > properly > > >>> > > > > > > > > for > > >>> > > > > > > > > > > some reason. > > >>> > > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > > > Yeah, > > remove "rhgb > > >>> quiet" from > > >>> > the > > >>> > > options.. > > >>> > > > the > > >>> > > > > dom0 > > >>> > > > > > kernel > > >>> > > > > > > cmdline > > >>> > > > > > > > > should > > be like this: > > >>> > > > > > > > ro > > >>> > root=/dev/VolGroup01/LogVol00 > > >>> > > > console=hvc0 > > >>> > > > > > earlyprintk=xen > > >>> > > > > > > nomodeset > > >>> > > > > > > > -- > > Pasi > > >>> > > > > > > > > > >>> > > > > > > > > References > > >>> > > > > > > > > > >>> > > > > > > > > Visible > > links > > >>> > > > > > > > 1. > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > [5][6][7][8][9][10][11][12] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > > > > > > 2. > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > [6][7][8][9][10][11][12][13] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > > > > > > 3. > > >>> > mailto:[7][8][9][10][11][12][13][14]pasik@iki.fi > > >>> > > > > > > > > >>> > > > > > > References > > >>> > > > > > > > > >>> > > > > > > Visible > links > > >>> > > > > > > 1. > > >>> > mailto:[9][10][11][12][13][14][15]pasik@iki.fi > > >>> > > > > > > 2. > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > [10][11][12][13][14][15][16] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > > > > > 3. > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > [11][12][13][14][15][16][17] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > > > > > 4. > > >>> > mailto:[12][13][14][15][16][17][18]pasik@iki.fi > > >>> > > > > > > 5. > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > [13][14][15][16][17][18][19] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > > > > > 6. > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > [14][15][16][17][18][19][20] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > > > > > 7. > > >>> > mailto:[15][16][17][18][19][20][21]pasik@iki.fi > > >>> > > > > > > Asserting Post > > complete GPIO!!! > > >>> > > > > > > Transfer > control to > > CSM 16-bit > > >>> binary for > > >>> > legacy > > >>> > > boot > > >>> > > > > > > __ __ > > _____ _ _ > > >>> _____ > > >>> > > _ _ > > >>> > > > > > > \ \/ /___ _ __ > > |___ /| || | > > >>> |___ / > > >>> > _ __ > > >>> > > ___| || | > > >>> > > > _ > > >>> > > > > __ _ > > >>> > > > > > __ ___ > > >>> > > > > > > \ // _ \ '_ > \ > > |_ \| || |_ > > >>> |_ \ __| > > >>> > '__/ > > >>> > > __| || > > >>> > > > |_ __| > > >>> > > > > '_ \| > > >>> > > > > > '__/ _ \ > > >>> > > > > > > / \ __/ | | > | > > ___) |__ _| > > >>> ___) |__| > > >>> > | | > > >>> > > (__|__ > > >>> > > > _|__| > > >>> > > > > |_) | | > > >>> > > > > > | __/ > > >>> > > > > > > /_/\_\___|_| > |_| > > |____(_) > > >>> |_|(_)____/ > > >>> > |_| > > >>> > > \___| |_| > > >>> > > > | > > >>> > > > > .__/|_| > > >>> > > > > > \___| > > >>> > > > > > > > > >>> > > > |_| > > >>> > > > > > > (XEN) Xen > version > > 3.4.3-rc4-pre > > >>> > > (kishore@localdomain) > > >>> > > > (gcc > > >>> > > > > version > > >>> > > > > > 4.1.2 20080704 > (Red > > Hat 4.1.2-46)) > > >>> Mon Mar > > >>> > 15 > > >>> > > 13:44:31 PDT > > >>> > > > 2010 > > >>> > > > > > > (XEN) Latest > > ChangeSet: Tue Mar 09 > > >>> > 18:15:52 2010 > > >>> > > +0000 > > >>> > > > > > 19924:6e72f8c3c017 > > >>> > > > > > > (XEN) Command > line: > > >>> console=vga,com1 > > >>> > > com1=115200,8n1 > > >>> > > > msi=1 > > >>> > > > > iommu=1 > > >>> > > > > > > (XEN) Video > > information: > > >>> > > > > > > (XEN) VGA is > text > > mode 80x25, font > > >>> 8x16 > > >>> > > > > > > (XEN) VBE/DDC > > methods: none; EDID > > >>> > transfer time: > > >>> > > 0 > > >>> > > > seconds > > >>> > > > > > > (XEN) EDID > info > > not retrieved > > >>> because no > > >>> > DDC > > >>> > > retrieval > > >>> > > > method > > >>> > > > > > detected > > >>> > > > > > > (XEN) Disc > > information: > > >>> > > > > > > (XEN) Found 1 > MBR > > signatures > > >>> > > > > > > (XEN) Found 1 > EDD > > information > > >>> structures > > >>> > > > > > > (XEN) Xen-e820 > RAM > > map: > > >>> > > > > > > (XEN) > > 0000000000000000 - > > >>> 000000000009d000 > > >>> > > (usable) > > >>> > > > > > > (XEN) > > 000000000009d000 - > > >>> 00000000000a0000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 00000000000e0000 - > > >>> 0000000000100000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 0000000000100000 - > > >>> 000000006d597000 > > >>> > > (usable) > > >>> > > > > > > (XEN) > > 000000006d597000 - > > >>> 000000006d686000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 000000006d686000 - > > >>> 000000006f598000 > > >>> > > (usable) > > >>> > > > > > > (XEN) > > 000000006f598000 - > > >>> 000000006f59a000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 000000006f59a000 - > > >>> 000000006f5af000 > > >>> > (ACPI > > >>> > > NVS) > > >>> > > > > > > (XEN) > > 000000006f5af000 - > > >>> 000000006f5d9000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 000000006f5d9000 - > > >>> 000000006f5f9000 > > >>> > (ACPI > > >>> > > data) > > >>> > > > > > > (XEN) > > 000000006f5f9000 - > > >>> 000000006f6df000 > > >>> > (ACPI > > >>> > > NVS) > > >>> > > > > > > (XEN) > > 000000006f6df000 - > > >>> 000000006f700000 > > >>> > (ACPI > > >>> > > data) > > >>> > > > > > > (XEN) > > 000000006f700000 - > > >>> 0000000080000000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 00000000a0000000 - > > >>> 00000000b0000000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 00000000fc000000 - > > >>> 00000000fd000000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 00000000fed1c000 - > > >>> 00000000fed20000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 00000000ffc00000 - > > >>> 0000000100000000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) System > RAM: > > 1780MB > > >>> (1823000kB) > > >>> > > > > > > (XEN) ACPI: > RSDP > > 000F03F0, 0024 (r2 > > >>> INTEL > > >>> > ) > > >>> > > > > > > (XEN) ACPI: > XSDT > > 6F6FE120, 0064 (r1 > > >>> INTEL > > >>> > THRLY > > >>> > > > 0 > > >>> > > > > > 1000013) > > >>> > > > > > > (XEN) ACPI: > FACP > > 6F6FD000, 00F4 (r4 > > >>> INTEL > > >>> > THRLY > > >>> > > > 0 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > DSDT > > 6F6F5000, 74F1 (r2 > > >>> INTEL > > >>> > THRLY > > >>> > > > 3 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > FACS > > 6F5F9000, 0040 > > >>> > > > > > > (XEN) ACPI: > APIC > > 6F6F4000, 01CC (r2 > > >>> INTEL > > >>> > THRLY > > >>> > > > 0 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > MCFG > > 6F6F3000, 003C (r1 > > >>> INTEL > > >>> > THRLY > > >>> > > > 1 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > HPET > > 6F6F2000, 0038 (r1 > > >>> INTEL > > >>> > THRLY > > >>> > > > 1 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > SLIT > > 6F6F1000, 0030 (r1 > > >>> INTEL > > >>> > THRLY > > >>> > > > 1 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > WDDT > > 6F6F0000, 0040 (r1 > > >>> INTEL > > >>> > THRLY > > >>> > > > 0 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > SSDT > > 6F5D9000, 1FDDC > > >>> (r1 > > >>> > INTEL SSDT > > >>> > > PM > > >>> > > > 4000 > > >>> > > > > INTL > > >>> > > > > > 20061109) > > >>> > > > > > > (XEN) ACPI: > DMAR > > 6F6EE000, 01D0 (r1 > > >>> INTEL > > >>> > THRLY > > >>> > > > 1 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) Domain > heap > > initialised > > >>> > > > > > > (XEN) Processor > #0 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) Processor > #2 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) Processor > #4 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) Processor > #16 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) Processor > #18 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) Processor > #20 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) Processor > #1 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) Processor > #3 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) Processor > #5 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) Processor > #17 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) Processor > #19 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) Processor > #21 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > IOAPIC[0]: > > apic_id 8, version > > >>> 32, > > >>> > address > > >>> > > > 0xfec00000, GSI > > >>> > > > > 0-23 > > >>> > > > > > > (XEN) > IOAPIC[1]: > > apic_id 9, version > > >>> 32, > > >>> > address > > >>> > > > 0xfec90000, GSI > > >>> > > > > 24-47 > > >>> > > > > > > (XEN) Enabling > APIC > > mode: Phys. > > >>> Using 2 > > >>> > I/O > > >>> > > APICs > > >>> > > > > > > (XEN) Intel > VT-d > > DMAR tables have > > >>> been > > >>> > parsed. > > >>> > > > > > > (XEN) Using > > scheduler: SMP Credit > > >>> > Scheduler > > >>> > > (credit) > > >>> > > > > > > (XEN) Detected > > 3200.207 MHz > > >>> processor. > > >>> > > > > > > (XEN) VMX: > > Supported advanced > > >>> features: > > >>> > > > > > > (XEN) - APIC > MMIO > > access > > >>> virtualisation > > >>> > > > > > > (XEN) - APIC > TPR > > shadow > > >>> > > > > > > (XEN) - > Extended > > Page Tables (EPT) > > >>> > > > > > > (XEN) - > > Virtual-Processor > > >>> Identifiers > > >>> > (VPID) > > >>> > > > > > > (XEN) - > Virtual > > NMI > > >>> > > > > > > (XEN) - MSR > > direct-access bitmap > > >>> > > > > > > (XEN) VMX: EPT > is > > available. > > >>> > > > > > > (XEN) VMX: VPID > is > > available. > > >>> > > > > > > (XEN) HVM: VMX > > enabled > > >>> > > > > > > (XEN) HVM: > Hardware > > Assisted Paging > > >>> > detected. > > >>> > > > > > > (XEN) CPU0: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) Booting > > processor 1/2 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU1: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) Booting > > processor 2/4 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU2: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) Booting > > processor 3/16 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU3: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) Booting > > processor 4/18 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU4: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) Booting > > processor 5/20 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU5: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) Booting > > processor 6/1 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU6: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) Booting > > processor 7/3 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU7: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) Booting > > processor 8/5 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU8: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) Booting > > processor 9/17 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU9: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) Booting > > processor 10/19 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU10: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) Booting > > processor 11/21 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU11: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) Total of > 12 > > processors > > >>> activated. > > >>> > > > > > > (XEN) ENABLING > > IO-APIC IRQs > > >>> > > > > > > (XEN) -> > Using > > new ACK method > > >>> > > > > > > (XEN) checking > TSC > > synchronization > > >>> across > > >>> > 12 > > >>> > > CPUs: > > >>> > > > passed. > > >>> > > > > > > (XEN) Platform > > timer is 14.318MHz > > >>> HPET > > >>> > > > > > > ?(XEN) Brought > up > > 12 CPUs > > >>> > > > > > > (XEN) Intel > VT-d > > Snoop Control > > >>> supported. > > >>> > > > > > > (XEN) Intel > VT-d > > DMA Passthrough > > >>> not > > >>> > supported. > > >>> > > > > > > (XEN) Intel > VT-d > > Queued > > >>> Invalidation > > >>> > supported. > > >>> > > > > > > (XEN) Intel > VT-d > > Interrupt > > >>> Remapping > > >>> > supported. > > >>> > > > > > > (XEN) I/O > > virtualisation enabled > > >>> > > > > > > (XEN) I/O > > virtualisation for PV > > >>> guests > > >>> > disabled > > >>> > > > > > > (XEN) xenoprof: > > Initialization > > >>> failed. > > >>> > Intel > > >>> > > processor > > >>> > > > model 44 > > >>> > > > > for P6 > > >>> > > > > > class family is > not > > supported > > >>> > > > > > > (XEN) *** > LOADING > > DOMAIN 0 *** > > >>> > > > > > > (XEN) Xen > kernel: > > 64-bit, lsb, > > >>> compat32 > > >>> > > > > > > (XEN) Dom0 > kernel: > > 64-bit, PAE, > > >>> lsb, > > >>> > paddr > > >>> > > 0x1000000 -> > > >>> > > > > 0x26bb000 > > >>> > > > > > > (XEN) PHYSICAL > > MEMORY ARRANGEMENT: > > >>> > > > > > > (XEN) Dom0 > alloc.: > > >>> > > 0000000064000000->0000000068000000 > > >>> > > > > (404490 pages > > >>> > > > > > to be allocated) > > >>> > > > > > > (XEN) VIRTUAL > > MEMORY ARRANGEMENT: > > >>> > > > > > > (XEN) Loaded > > kernel: > > >>> > > ffffffff81000000->ffffffff826bb000 > > >>> > > > > > > (XEN) Init. > > ramdisk: > > >>> > > ffffffff826bb000->ffffffff82d0d800 > > >>> > > > > > > (XEN) > Phys-Mach > > map: > > >>> > > ffffffff82d0e000->ffffffff83044050 > > >>> > > > > > > (XEN) Start > info: > > >>> > > ffffffff83045000->ffffffff830454b4 > > >>> > > > > > > (XEN) Page > tables: > > >>> > > ffffffff83046000->ffffffff83063000 > > >>> > > > > > > (XEN) Boot > stack: > > >>> > > ffffffff83063000->ffffffff83064000 > > >>> > > > > > > (XEN) TOTAL: > > >>> > > ffffffff80000000->ffffffff83400000 > > >>> > > > > > > (XEN) ENTRY > > ADDRESS: > > >>> ffffffff819c1200 > > >>> > > > > > > (XEN) Dom0 has > > maximum 12 VCPUs > > >>> > > > > > > (XEN) Scrubbing > > Free RAM: .done. > > >>> > > > > > > (XEN) Xen trace > > buffers: disabled > > >>> > > > > > > (XEN) Std. > > Loglevel: Errors and > > >>> warnings > > >>> > > > > > > (XEN) Guest > > Loglevel: Nothing > > >>> > (Rate-limited: > > >>> > > Errors and > > >>> > > > > warnings) > > >>> > > > > > > (XEN) Xen is > > relinquishing VGA > > >>> console. > > >>> > > > > > > (XEN) *** > Serial > > input -> DOM0 > > >>> (type > > >>> > 'CTRL-a' > > >>> > > three > > >>> > > > times to > > >>> > > > > switch > > >>> > > > > > input to Xen) > > >>> > > > > > > (XEN) Freed > 128kB > > init memory. > > >>> > > > > > > mapping kernel > into > > physical memory > > >>> > > > > > > Xen: setup ISA > > identity maps > > >>> > > > > > > about to get > > started... > > >>> > > > > > > Initializing > cgroup > > subsys cpuset > > >>> > > > > > > Initializing > cgroup > > subsys cpu > > >>> > > > > > > Linux version > > 2.6.32.9 > > >>> > > (kishore@localhost.localdomain) > > >>> > > > (gcc > > >>> > > > > version > > >>> > > > > > 4.1.2 20080704 > (Red > > Hat 4.1.2-46)) #1 > > >>> SMP > > >>> > Mon Mar > > >>> > > 15 > > >>> > > > 15:16:28 PDT > > >>> > > > > 2010 > > >>> > > > > > > Command line: > ro > > >>> > root=/dev/VolGroup01/LogVol00 > > >>> > > > console=hvc0 > > >>> > > > > > earlyprintk=xen > > nomodeset > > >>> > > > > > > KERNEL > supported > > cpus: > > >>> > > > > > > Intel > > GenuineIntel > > >>> > > > > > > AMD > AuthenticAMD > > >>> > > > > > > Centaur > > CentaurHauls > > >>> > > > > > > BIOS-provided > > physical RAM map: > > >>> > > > > > > Xen: > > 0000000000000000 - > > >>> 000000000009d000 > > >>> > > (usable) > > >>> > > > > > > Xen: > > 000000000009d000 - > > >>> 0000000000100000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 0000000000100000 - > > >>> 0000000066c0a000 > > >>> > > (usable) > > >>> > > > > > > Xen: > > 000000006d597000 - > > >>> 000000006d686000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 000000006f598000 - > > >>> 000000006f59a000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 000000006f59a000 - > > >>> 000000006f5af000 > > >>> > (ACPI > > >>> > > NVS) > > >>> > > > > > > Xen: > > 000000006f5af000 - > > >>> 000000006f5d9000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 000000006f5d9000 - > > >>> 000000006f5f9000 > > >>> > (ACPI > > >>> > > data) > > >>> > > > > > > Xen: > > 000000006f5f9000 - > > >>> 000000006f6df000 > > >>> > (ACPI > > >>> > > NVS) > > >>> > > > > > > Xen: > > 000000006f6df000 - > > >>> 000000006f700000 > > >>> > (ACPI > > >>> > > data) > > >>> > > > > > > Xen: > > 000000006f700000 - > > >>> 0000000080000000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 00000000a0000000 - > > >>> 00000000b0000000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 00000000fc000000 - > > >>> 00000000fd000000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 00000000fed1c000 - > > >>> 00000000fed20000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 00000000ffc00000 - > > >>> 0000000100000000 > > >>> > > (reserved) > > >>> > > > > > > bootconsole > > [xenboot0] enabled > > >>> > > > > > > DMI 2.4 > present. > > >>> > > > > > > last_pfn = > 0x66c0a > > max_arch_pfn = > > >>> > 0x400000000 > > >>> > > > > > > > > init_memory_mapping: > > >>> > > 0000000000000000-0000000066c0a000 > > >>> > > > > > > RAMDISK: > 026bb000 - > > 02d0d800 > > >>> > > > > > > ACPI: RSDP > > 00000000000f03f0 00024 > > >>> (v02 > > >>> > INTEL ) > > >>> > > > > > > ACPI: XSDT > > 000000006f6fe120 00064 > > >>> (v01 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000000 > > >>> > > > > > 01000013) > > >>> > > > > > > ACPI: FACP > > 000000006f6fd000 000F4 > > >>> (v04 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000000 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: DSDT > > 000000006f6f5000 074F1 > > >>> (v02 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000003 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: FACS > > 000000006f5f9000 00040 > > >>> > > > > > > ACPI: APIC > > 000000006f6f4000 001CC > > >>> (v02 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000000 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: MCFG > > 000000006f6f3000 0003C > > >>> (v01 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000001 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: HPET > > 000000006f6f2000 00038 > > >>> (v01 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000001 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: SLIT > > 000000006f6f1000 00030 > > >>> (v01 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000001 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: WDDT > > 000000006f6f0000 00040 > > >>> (v01 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000000 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: SSDT > > 000000006f5d9000 1FDDC > > >>> (v01 > > >>> > INTEL > > >>> > > SSDT PM > > >>> > > > 00004000 > > >>> > > > > INTL > > >>> > > > > > 20061109) > > >>> > > > > > > ACPI: > > 000000006f6ee000 001D0 > > >>> (v01 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000001 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > No NUMA > > configuration found > > >>> > > > > > > Faking a node > at > > >>> > > 0000000000000000-0000000066c0a000 > > >>> > > > > > > Bootmem setup > node > > 0 > > >>> > > 0000000000000000-0000000066c0a000 > > >>> > > > > > > NODE_DATA > > [0000000000008000 - > > >>> > 000000000001ffff] > > >>> > > > > > > bootmap > > [0000000000020000 - > > >>> > 000000000002cd87] > > >>> > > pages d > > >>> > > > > > > (9 early > > reservations) ==> bootmem > > >>> > [0000000000 - > > >>> > > > 0066c0a000] > > >>> > > > > > > #0 > [0000000000 - > > 0000001000] > > >>> BIOS data > > >>> > page > > >>> > > ==> > > >>> > > > [0000000000 > > >>> > > > > - > > >>> > > > > > 0000001000] > > >>> > > > > > > #1 > [0003046000 - > > 0003063000] > > >>> XEN > > >>> > PAGETABLES > > >>> > > ==> > > >>> > > > [0003046000 > > >>> > > > > - > > >>> > > > > > 0003063000] > > >>> > > > > > > #2 > [0000006000 - > > 0000008000] > > >>> > TRAMPOLINE > > >>> > > ==> > > >>> > > > [0000006000 > > >>> > > > > - > > >>> > > > > > 0000008000] > > >>> > > > > > > #3 > [0001000000 - > > 000269ae98] > > >>> TEXT > > >>> > DATA BSS > > >>> > > ==> > > >>> > > > [0001000000 > > >>> > > > > - > > >>> > > > > > 000269ae98] > > >>> > > > > > > #4 > [00026bb000 - > > 0002d0d800] > > >>> > RAMDISK > > >>> > > ==> > > >>> > > > [00026bb000 > > >>> > > > > - > > >>> > > > > > 0002d0d800] > > >>> > > > > > > #5 > [0002d0e000 - > > 0003046000] > > >>> XEN START > > >>> > INFO > > >>> > > ==> > > >>> > > > [0002d0e000 > > >>> > > > > - > > >>> > > > > > 0003046000] > > >>> > > > > > > #6 > [000269b000 - > > 000269b011] > > >>> > BRK > > >>> > > ==> > > >>> > > > [000269b000 > > >>> > > > > - > > >>> > > > > > 000269b011] > > >>> > > > > > > #7 > [0000100000 - > > 000041a000] > > >>> > PGTABLE > > >>> > > ==> > > >>> > > > [0000100000 > > >>> > > > > - > > >>> > > > > > 000041a000] > > >>> > > > > > > #8 > [0000001000 - > > 0000001030] > > >>> ACPI > > >>> > SLIT > > >>> > > ==> > > >>> > > > [0000001000 > > >>> > > > > - > > >>> > > > > > 0000001030] > > >>> > > > > > > found SMP > MP-table > > at > > >>> [ffff8800000fd750] > > >>> > fd750 > > >>> > > > > > > Zone PFN > ranges: > > >>> > > > > > > DMA > > 0x00000000 -> 0x00001000 > > >>> > > > > > > DMA32 > > 0x00001000 -> 0x00100000 > > >>> > > > > > > Normal > > 0x00100000 -> 0x00100000 > > >>> > > > > > > Movable zone > start > > PFN for each > > >>> node > > >>> > > > > > > > early_node_map[2] > > active PFN ranges > > >>> > > > > > > 0: > 0x00000000 > > -> 0x0000009d > > >>> > > > > > > 0: > 0x00000100 > > -> 0x00066c0a > > >>> > > > > > > ACPI: PM-Timer > IO > > Port: 0x408 > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x00] > > >>> lapic_id[0x00] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x01] > > >>> lapic_id[0x02] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x02] > > >>> lapic_id[0x04] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x03] > > >>> lapic_id[0x10] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x04] > > >>> lapic_id[0x12] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x05] > > >>> lapic_id[0x14] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x06] > > >>> lapic_id[0x01] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x07] > > >>> lapic_id[0x03] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x08] > > >>> lapic_id[0x05] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x09] > > >>> lapic_id[0x11] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x0a] > > >>> lapic_id[0x13] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x0b] > > >>> lapic_id[0x15] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x0c] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x0d] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x0e] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x0f] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x10] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x11] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x12] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x13] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x14] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x15] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x16] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x17] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x00] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x01] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x02] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x03] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x04] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x05] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x06] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x07] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x08] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x09] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x0a] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x0b] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x0c] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x0d] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x0e] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x0f] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x10] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x11] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x12] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x13] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x14] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x15] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x16] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: LAPIC_NMI > > (acpi_id[0x17] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: IOAPIC > > (id[0x08] > > >>> address[0xfec00000] > > >>> > > gsi_base[0]) > > >>> > > > > > > IOAPIC[0]: > apic_id > > 8, version 0, > > >>> address > > >>> > > 0xfec00000, GSI > > >>> > > > 0-0 > > >>> > > > > > > ACPI: IOAPIC > > (id[0x09] > > >>> address[0xfec90000] > > >>> > > gsi_base[24]) > > >>> > > > > > > IOAPIC[1]: > apic_id > > 9, version 0, > > >>> address > > >>> > > 0xfec90000, GSI > > >>> > > > 24-24 > > >>> > > > > > > ACPI: > INT_SRC_OVR > > (bus 0 bus_irq 0 > > >>> > global_irq 2 > > >>> > > dfl dfl) > > >>> > > > > > > ERROR: Unable > to > > locate IOAPIC for > > >>> GSI 2 > > >>> > > > > > > ACPI: > INT_SRC_OVR > > (bus 0 bus_irq 9 > > >>> > global_irq 9 > > >>> > > high > > >>> > > > level) > > >>> > > > > > > ERROR: Unable > to > > locate IOAPIC for > > >>> GSI 9 > > >>> > > > > > > Using ACPI > (MADT) > > for SMP > > >>> configuration > > >>> > > information > > >>> > > > > > > ACPI: HPET id: > > 0x8086a401 base: > > >>> 0xfed00000 > > >>> > > > > > > SMP: Allowing > 12 > > CPUs, 0 hotplug > > >>> CPUs > > >>> > > > > > > PM: Registered > > nosave memory: > > >>> > 000000000009d000 - > > >>> > > > > 0000000000100000 > > >>> > > > > > > Allocating PCI > > resources starting > > >>> at > > >>> > b0000000 > > >>> > > (gap: > > >>> > > > > b0000000:4c000000) > > >>> > > > > > > Booting > > paravirtualized kernel on > > >>> Xen > > >>> > > > > > > Xen version: > > 3.4.3-rc4-pre > > >>> (preserve-AD) > > >>> > (dom0) > > >>> > > > > > > NR_CPUS:512 > > nr_cpumask_bits:512 > > >>> > nr_cpu_ids:12 > > >>> > > > nr_node_ids:1 > > >>> > > > > > > PERCPU: > Embedded > > 478 pages/cpu > > >>> > @ffff880005ebc000 > > >>> > > > s1928024 r8192 > > >>> > > > > d21672 > > >>> > > > > > u1957888 > > >>> > > > > > > pcpu-alloc: > > s1928024 r8192 d21672 > > >>> u1957888 > > >>> > > > alloc=478*4096 > > >>> > > > > > > pcpu-alloc: [0] > 00 > > [0] 01 [0] 02 > > >>> [0] 03 > > >>> > [0] 04 > > >>> > > [0] 05 > > >>> > > > [0] 06 > > >>> > > > > [0] 07 > > >>> > > > > > > pcpu-alloc: [0] > 08 > > [0] 09 [0] 10 > > >>> [0] 11 > > >>> > > > > > > Xen: using > > vcpu_info placement > > >>> > > > > > > Built 1 > zonelists > > in Node order, > > >>> mobility > > >>> > > grouping on. > > >>> > > > Total > > >>> > > > > pages: > > >>> > > > > > 409291 > > >>> > > > > > > Policy zone: > DMA32 > > >>> > > > > > > Kernel command > > line: ro > > >>> > > root=/dev/VolGroup01/LogVol00 > > >>> > > > > console=hvc0 > > >>> > > > > > earlyprintk=xen > > nomodeset > > >>> > > > > > > PID hash table > > entries: 4096 > > >>> (order: 3, > > >>> > 32768 > > >>> > > bytes) > > >>> > > > > > > Initializing > CPU#0 > > >>> > > > > > > DMA: Placing > 64MB > > software IO TLB > > >>> between > > >>> > > > ffff880007525000 - > > >>> > > > > > ffff88000b525000 > > >>> > > > > > > DMA: software > IO > > TLB at phys > > >>> 0x7525000 - > > >>> > > 0xb525000 > > >>> > > > > > > > xen_swiotlb_fixup: > > >>> buf=ffff880007525000 > > >>> > > size=67108864 > > >>> > > > > > > > xen_swiotlb_fixup: > > >>> buf=ffff88000b585000 > > >>> > > size=32768 > > >>> > > > > > > Memory: > > 1514268k/1683496k available > > >>> (4654k > > >>> > kernel > > >>> > > code, > > >>> > > > 396k > > >>> > > > > absent, > > >>> > > > > > 168832k reserved, > > 3443k data, 3396k > > >>> init) > > >>> > > > > > > SLUB: > Genslabs=14, > > HWalign=64, > > >>> Order=0-3, > > >>> > > MinObjects=0, > > >>> > > > > CPUs=12, > > >>> > > > > > Nodes=1 > > >>> > > > > > > Hierarchical > RCU > > implementation. > > >>> > > > > > > NR_IRQS:4352 > > nr_irqs:3072 > > >>> > > > > > > Already setup > the > > GSI :0 > > >>> > > > > > > Already setup > the > > GSI :1 > > >>> > > > > > > Already setup > the > > GSI :2 > > >>> > > > > > > Already setup > the > > GSI :3 > > >>> > > > > > > Already setup > the > > GSI :4 > > >>> > > > > > > Already setup > the > > GSI :5 > > >>> > > > > > > Already setup > the > > GSI :6 > > >>> > > > > > > Already setup > the > > GSI :7 > > >>> > > > > > > Already setup > the > > GSI :8 > > >>> > > > > > > Already setup > the > > GSI :9 > > >>> > > > > > > Already setup > the > > GSI :10 > > >>> > > > > > > Already setup > the > > GSI :11 > > >>> > > > > > > Already setup > the > > GSI :12 > > >>> > > > > > > Already setup > the > > GSI :13 > > >>> > > > > > > Already setup > the > > GSI :14 > > >>> > > > > > > Already setup > the > > GSI :15 > > >>> > > > > > > ACPI: > INT_SRC_OVR > > (bus 0 bus_irq 0 > > >>> > global_irq 2 > > >>> > > dfl dfl) > > >>> > > > > > > ACPI: > INT_SRC_OVR > > (bus 0 bus_irq 9 > > >>> > global_irq 9 > > >>> > > high > > >>> > > > level) > > >>> > > > > > > xen: sci > override: > > source_irq=9 > > >>> > global_irq=9 > > >>> > > trigger=c > > >>> > > > > polarity=1 > > >>> > > > > > > > xen_allocate_pirq: > > returning irq 9 > > >>> for gsi > > >>> > 9 > > >>> > > > > > > Already setup > the > > GSI :9 > > >>> > > > > > > xen: acpi sci 9 > > >>> > > > > > > Console: colour > > VGA+ 80x25 > > >>> > > > > > > console [hvc0] > > enabled, bootconsole > > >>> > disabled > > >>> > > console > > >>> > > > [hvc0] > > >>> > > > > enabled, > > >>> > > > > > bootconsole > disabled > > >>> > > > > > > Lock dependency > > validator: > > >>> Copyright (c) > > >>> > 2006 Red > > >>> > > Hat, > > >>> > > > Inc., > > >>> > > > > Ingo > > >>> > > > > > Molnar ... > > MAX_LOCKDEP_SUBCLASSES: 8 > > >>> ... > > >>> > > MAX_LOCK_DEPTH: > > >>> > > > > 48 > > >>> > > > > > ... > MAX_LOCKDEP_KEYS: > > 8191 ... > > >>> > > CLASSHASH_SIZE: > > >>> > > > > 4096 ... > > >>> > > > > > > MAX_LOCKDEP_ENTRIES: > > 16384 ... > > >>> > > MAX_LOCKDEP_CHAINS: > > >>> > > > 32768 > > >>> > > > > ... > > >>> > > > > > CHAINHASH_SIZE: > > 16384 > > >>> memory used > > >>> > by lock > > >>> > > > dependency > > >>> > > > > info: > > >>> > > > > > 6367 kB per > > task-struct memory > > >>> footprint: > > >>> > 2688 > > >>> > > bytes > > >>> > > > allocated > > >>> > > > > 17039360 > > >>> > > > > > bytes of > page_cgroup > > please try > > >>> > > 'cgroup_disable=memory' > > >>> > > > option if > > >>> > > > > you > > >>> > > > > > don't want memory > > cgroups installing > > >>> Xen > > >>> > timer for > > >>> > > CPU 0 > > >>> > > > Detected > > >>> > > > > > 3200.206 MHz > > processor. Calibrating > > >>> delay > > >>> > loop > > >>> > > (skipped), > > >>> > > > value > > >>> > > > > > calculated using > timer > > frequency.. > > >>> 6400.41 > > >>> > BogoMIPS > > >>> > > > (lpj=3200206) > > >>> > > > > > Security Framework > > initialized > > >>> SELinux: > > >>> > > Initializing. > > >>> > > > Dentry > > >>> > > > > cache hash > > >>> > > > > > table entries: > 262144 > > (order: 9, > > >>> 2097152 > > >>> > bytes) > > >>> > > > Inode-cache hash > > >>> > > > > table > > >>> > > > > > entries: 131072 > > (order: 8, 1048576 > > >>> bytes) > > >>> > > Mount-cache hash > > >>> > > > table > > >>> > > > > > entries: 256 > > Initializing cgroup > > >>> subsys ns > > >>> > > Initializing > > >>> > > > cgroup > > >>> > > > > subsys > > >>> > > > > > cpuacct > Initializing > > cgroup subsys > > >>> memory > > >>> > > Initializing > > >>> > > > cgroup > > >>> > > > > subsys > > >>> > > > > > devices > Initializing > > cgroup subsys > > >>> freezer > > >>> > > Initializing > > >>> > > > cgroup > > >>> > > > > subsys > > >>> > > > > > net_cls CPU: L1 I > > cache: 32K, L1 D > > >>> cache: > > >>> > 32K CPU: > > >>> > > L2 > > >>> > > > cache: 256K > > >>> > > > > CPU: > > >>> > > > > > L3 cache: 12288K > CPU > > 0/0x0 -> Node 0 > > >>> CPU: > > >>> > > Unsupported > > >>> > > > number of > > >>> > > > > siblings > > >>> > > > > > 32 Performance > Events: > > unsupported p6 > > >>> CPU > > >>> > model 44 > > >>> > > no PMU > > >>> > > > driver, > > >>> > > > > > software events > only. > > lockdep: fixing > > >>> up > > >>> > > alternatives. SMP > > >>> > > > > alternatives: > > >>> > > > > > switching to UP > code > > ACPI: Core > > >>> revision > > >>> > 20090903 > > >>> > > ftrace: > > >>> > > > > converting > > >>> > > > > > mcount calls to 0f > 1f > > 44 00 00 > > >>> ftrace: > > >>> > allocating > > >>> > > 27971 > > >>> > > > entries > > >>> > > > > in 110 > > >>> > > > > > pages installing > Xen > > timer for CPU 1 > > >>> > lockdep: > > >>> > > fixing up > > >>> > > > > alternatives. > > >>> > > > > > SMP alternatives: > > switching to SMP > > >>> code > > >>> > > Initializing CPU#1 > > >>> > > > CPU: > > >>> > > > > L1 I > > >>> > > > > > cache: 32K, L1 D > > cache: 32K CPU: L2 > > >>> cache: > > >>> > 256K > > >>> > > CPU: L3 > > >>> > > > cache: > > >>> > > > > 12288K > > >>> > > > > > CPU 1/0x0 -> Node > 0 > > CPU: Unsupported > > >>> number > > >>> > of > > >>> > > siblings 32 > > >>> > > > > installing > > >>> > > > > > Xen timer for CPU > 2 > > Initializing > > >>> CPU#2 CPU: > > >>> > L1 I > > >>> > > cache: > > >>> > > > 32K, L1 D > > >>> > > > > cache: > > >>> > > > > > 32K CPU: L2 cache: > > 256K CPU: L3 > > >>> cache: > > >>> > 12288K CPU > > >>> > > 2/0x0 -> > > >>> > > > Node 0 > > >>> > > > > CPU: > > >>> > > > > > Unsupported number > of > > siblings 32 > > >>> installing > > >>> > Xen > > >>> > > timer for > > >>> > > > CPU 3 > > >>> > > > > > Initializing CPU#3 > > CPU: L1 I cache: > > >>> 32K, L1 > > >>> > D > > >>> > > cache: 32K > > >>> > > > CPU: L2 > > >>> > > > > cache: > > >>> > > > > > 256K CPU: L3 > cache: > > 12288K CPU 3/0x0 > > >>> -> Node > > >>> > 0 CPU: > > >>> > > > Unsupported > > >>> > > > > number > > >>> > > > > > of siblings 32 > > installing Xen timer > > >>> for CPU > > >>> > 4 > > >>> > > Initializing > > >>> > > > CPU#4 > > >>> > > > > CPU: L1 > > >>> > > > > > I cache: 32K, L1 D > > cache: 32K CPU: L2 > > >>> cache: > > >>> > 256K > > >>> > > CPU: L3 > > >>> > > > cache: > > >>> > > > > 12288K > > >>> > > > > > CPU 4/0x0 -> Node > 0 > > CPU: Unsupported > > >>> number > > >>> > of > > >>> > > siblings 32 > > >>> > > > > installing > > >>> > > > > > Xen timer for CPU > 5 > > Initializing > > >>> CPU#5 CPU: > > >>> > L1 I > > >>> > > cache: > > >>> > > > 32K, L1 D > > >>> > > > > cache: > > >>> > > > > > 32K CPU: L2 cache: > > 256K CPU: L3 > > >>> cache: > > >>> > 12288K CPU > > >>> > > 5/0x0 -> > > >>> > > > Node 0 > > >>> > > > > CPU: > > >>> > > > > > Unsupported number > of > > siblings 32 > > >>> installing > > >>> > Xen > > >>> > > timer for > > >>> > > > CPU 6 > > >>> > > > > > Initializing CPU#6 > > CPU: L1 I cache: > > >>> 32K, L1 > > >>> > D > > >>> > > cache: 32K > > >>> > > > CPU: L2 > > >>> > > > > cache: > > >>> > > > > > 256K CPU: L3 > cache: > > 12288K CPU 6/0x0 > > >>> -> Node > > >>> > 0 CPU: > > >>> > > > Unsupported > > >>> > > > > number > > >>> > > > > > of siblings 32 > > installing Xen timer > > >>> for CPU > > >>> > 7 > > >>> > > Initializing > > >>> > > > CPU#7 > > >>> > > > > CPU: L1 > > >>> > > > > > I cache: 32K, L1 D > > cache: 32K CPU: L2 > > >>> cache: > > >>> > 256K > > >>> > > CPU: L3 > > >>> > > > cache: > > >>> > > > > 12288K > > >>> > > > > > CPU 7/0x0 -> Node > 0 > > CPU: Unsupported > > >>> number > > >>> > of > > >>> > > siblings 32 > > >>> > > > > installing > > >>> > > > > > Xen timer for CPU > 8 > > Initializing > > >>> CPU#8 CPU: > > >>> > L1 I > > >>> > > cache: > > >>> > > > 32K, L1 D > > >>> > > > > cache: > > >>> > > > > > 32K CPU: L2 cache: > > 256K CPU: L3 > > >>> cache: > > >>> > 12288K CPU > > >>> > > 8/0x0 -> > > >>> > > > Node 0 > > >>> > > > > CPU: > > >>> > > > > > Unsupported number > of > > siblings 32 > > >>> installing > > >>> > Xen > > >>> > > timer for > > >>> > > > CPU 9 > > >>> > > > > > Initializing CPU#9 > > CPU: L1 I cache: > > >>> 32K, L1 > > >>> > D > > >>> > > cache: 32K > > >>> > > > CPU: L2 > > >>> > > > > cache: > > >>> > > > > > 256K CPU: L3 > cache: > > 12288K CPU 9/0x0 > > >>> -> Node > > >>> > 0 CPU: > > >>> > > > Unsupported > > >>> > > > > number > > >>> > > > > > of siblings 32 > > installing Xen timer > > >>> for CPU > > >>> > 10 > > >>> > > > Initializing > > >>> > > > > CPU#10 CPU: > > >>> > > > > > L1 I cache: 32K, > L1 D > > cache: 32K CPU: > > >>> L2 > > >>> > cache: > > >>> > > 256K CPU: > > >>> > > > L3 > > >>> > > > > cache: > > >>> > > > > > 12288K CPU 10/0x0 > -> > > Node 0 CPU: > > >>> Unsupported > > >>> > number > > >>> > > of > > >>> > > > siblings > > >>> > > > > 32 > > >>> > > > > > installing Xen > timer > > for CPU 11 > > >>> Initializing > > >>> > CPU#11 > > >>> > > CPU: > > >>> > > > L1 I > > >>> > > > > cache: > > >>> > > > > > 32K, L1 D cache: > 32K > > CPU: L2 cache: > > >>> 256K > > >>> > CPU: L3 > > >>> > > cache: > > >>> > > > 12288K > > >>> > > > > CPU > > >>> > > > > > 11/0x0 -> Node 0 > CPU: > > Unsupported > > >>> number of > > >>> > > siblings 32 > > >>> > > > Brought > > >>> > > > > up 12 > > >>> > > > > > CPUs Grant table > > initialized > > >>> regulator: core > > >>> > > version 0.5 > > >>> > > > Time: > > >>> > > > > 14:45:00 > > >>> > > > > > Date: 03/16/10 > NET: > > Registered > > >>> protocol > > >>> > family 16 > > >>> > > > > xenbus_probe_init ok > > >>> > > > > > ACPI FADT declares > the > > system doesn't > > >>> > support PCIe > > >>> > > ASPM, > > >>> > > > so > > >>> > > > > disable it > > >>> > > > > > ACPI: bus type pci > > registered PCI: > > >>> MCFG > > >>> > > configuration 0: > > >>> > > > base > > >>> > > > > a0000000 > > >>> > > > > > segment 0 buses 0 > - > > 255 PCI: MCFG > > >>> area at > > >>> > a0000000 > > >>> > > > reserved in > > >>> > > > > E820 PCI: > > >>> > > > > > Using MMCONFIG at > > a0000000 - afffffff > > >>> PCI: > > >>> > Using > > >>> > > > configuration > > >>> > > > > type 1 > > >>> > > > > > for base access > bio: > > create slab > > >>> <bio-0> at > > >>> > 0 ACPI > > >>> > > Error: > > >>> > > > Field > > >>> > > > > [CPB3] > > >>> > > > > > at 96 exceeds > Buffer > > [NULL] size 64 > > >>> (bits) > > >>> > > > > (20090903/dsopcode-596) > ACPI > > >>> > > > > > Error > (psparse-0537): > > Method > > >>> parse/execution > > >>> > failed > > >>> > > > [\_SB_._OSC] > > >>> > > > > (Node > > >>> > > > > > ffff880064e00c98), > > >>> AE_AML_BUFFER_LIMIT ACPI: > > >>> > > Interpreter > > >>> > > > enabled > > >>> > > > > ACPI: > > >>> > > > > > (supports S0 S1 S3 > S4 > > S5) ACPI: Using > > >>> IOAPIC > > >>> > for > > >>> > > interrupt > > >>> > > > > routing ACPI > > >>> > > > > > Warning: Incorrect > > checksum in table > > >>> [ ] > > >>> > - 97, > > >>> > > should > > >>> > > > be DB > > >>> > > > > > > (20090903/tbutils-314) > > ACPI: No dock > > >>> devices > > >>> > found. > > >>> > > ACPI: > > >>> > > > PCI > > >>> > > > > Root > > >>> > > > > > Bridge [PCI0] > > (0000:00) pci > > >>> 0000:00:01.0: > > >>> > PME# > > >>> > > supported > > >>> > > > from D0 > > >>> > > > > D3hot > > >>> > > > > > D3cold pci > > 0000:00:01.0: PME# > > >>> disabled pci > > >>> > > 0000:00:02.0: > > >>> > > > PME# > > >>> > > > > supported > > >>> > > > > > from D0 D3hot > D3cold > > pci > > >>> 0000:00:02.0: PME# > > >>> > > disabled pci > > >>> > > > > 0000:00:03.0: > > >>> > > > > > PME# supported > from D0 > > D3hot D3cold > > >>> pci > > >>> > > 0000:00:03.0: PME# > > >>> > > > > disabled pci > > >>> > > > > > 0000:00:04.0: PME# > > supported from D0 > > >>> D3hot > > >>> > D3cold > > >>> > > pci > > >>> > > > > 0000:00:04.0: PME# > > >>> > > > > > disabled pci > > 0000:00:05.0: PME# > > >>> supported > > >>> > from D0 > > >>> > > D3hot > > >>> > > > D3cold > > >>> > > > > pci > > >>> > > > > > 0000:00:05.0: PME# > > disabled pci > > >>> > 0000:00:06.0: PME# > > >>> > > > supported from > > >>> > > > > D0 > > >>> > > > > > D3hot D3cold pci > > 0000:00:06.0: PME# > > >>> disabled > > >>> > pci > > >>> > > > 0000:00:07.0: > > >>> > > > > PME# > > >>> > > > > > supported from D0 > > D3hot D3cold pci > > >>> > 0000:00:07.0: > > >>> > > PME# > > >>> > > > disabled > > >>> > > > > pci > > >>> > > > > > 0000:00:08.0: PME# > > supported from D0 > > >>> D3hot > > >>> > D3cold > > >>> > > pci > > >>> > > > > 0000:00:08.0: PME# > > >>> > > > > > disabled pci > > 0000:00:09.0: PME# > > >>> supported > > >>> > from D0 > > >>> > > D3hot > > >>> > > > D3cold > > >>> > > > > pci > > >>> > > > > > 0000:00:09.0: PME# > > disabled pci > > >>> > 0000:00:0a.0: PME# > > >>> > > > supported from > > >>> > > > > D0 > > >>> > > > > > D3hot D3cold pci > > 0000:00:0a.0: PME# > > >>> disabled > > >>> > pci > > >>> > > > 0000:00:13.0: > > >>> > > > > PME# > > >>> > > > > > supported from D0 > > D3hot D3cold pci > > >>> > 0000:00:13.0: > > >>> > > PME# > > >>> > > > disabled > > >>> > > > > pci > > >>> > > > > > 0000:00:1a.7: PME# > > supported from D0 > > >>> D3hot > > >>> > D3cold > > >>> > > pci > > >>> > > > > 0000:00:1a.7: PME# > > >>> > > > > > disabled pci > > 0000:00:1c.0: PME# > > >>> supported > > >>> > from D0 > > >>> > > D3hot > > >>> > > > D3cold > > >>> > > > > pci > > >>> > > > > > 0000:00:1c.0: PME# > > disabled pci > > >>> > 0000:00:1c.4: PME# > > >>> > > > supported from > > >>> > > > > D0 > > >>> > > > > > D3hot D3cold pci > > 0000:00:1c.4: PME# > > >>> disabled > > >>> > pci > > >>> > > > 0000:00:1c.5: > > >>> > > > > PME# > > >>> > > > > > supported from D0 > > D3hot D3cold pci > > >>> > 0000:00:1c.5: > > >>> > > PME# > > >>> > > > disabled > > >>> > > > > pci > > >>> > > > > > 0000:00:1d.7: PME# > > supported from D0 > > >>> D3hot > > >>> > D3cold > > >>> > > pci > > >>> > > > > 0000:00:1d.7: PME# > > >>> > > > > > disabled pci > > 0000:00:1f.0: quirk: > > >>> region > > >>> > 0400-047f > > >>> > > claimed > > >>> > > > by > > >>> > > > > ICH6 > > >>> > > > > > ACPI/GPIO/TCO pci > > 0000:00:1f.0: > > >>> quirk: > > >>> > region > > >>> > > 0500-053f > > >>> > > > claimed > > >>> > > > > by ICH6 > > >>> > > > > > GPIO pci > 0000:00:1f.0: > > ICH7 LPC > > >>> Generic IO > > >>> > decode 1 > > >>> > > PIO at > > >>> > > > 0680 > > >>> > > > > (mask > > >>> > > > > > 000f) pci > > 0000:00:1f.0: ICH7 LPC > > >>> Generic IO > > >>> > decode > > >>> > > 2 PIO > > >>> > > > at 0ca0 > > >>> > > > > (mask > > >>> > > > > > 000f) pci > > 0000:00:1f.0: ICH7 LPC > > >>> Generic IO > > >>> > decode > > >>> > > 3 PIO > > >>> > > > at 0600 > > >>> > > > > (mask > > >>> > > > > > 001f) pci > > 0000:00:1f.2: PME# > > >>> supported from > > >>> > D3hot > > >>> > > pci > > >>> > > > > 0000:00:1f.2: PME# > > >>> > > > > > disabled pci > > 0000:01:00.0: PME# > > >>> supported > > >>> > from D0 > > >>> > > D3hot > > >>> > > > D3cold > > >>> > > > > pci > > >>> > > > > > 0000:01:00.0: PME# > > disabled pci > > >>> > 0000:01:00.1: PME# > > >>> > > > supported from > > >>> > > > > D0 > > >>> > > > > > D3hot D3cold pci > > 0000:01:00.1: PME# > > >>> disabled > > >>> > pci > > >>> > > > 0000:0c:00.0: > > >>> > > > > disabling > > >>> > > > > > ASPM on pre-1.1 > PCIe > > device. You can > > >>> enable > > >>> > it > > >>> > > with > > >>> > > > > 'pcie_aspm=force' > > >>> > > > > > pci 0000:00:1e.0: > > transparent bridge > > >>> ACPI: > > >>> > PCI Root > > >>> > > Bridge > > >>> > > > [PCI1] > > >>> > > > > > (0000:fe) ACPI: > PCI > > Root Bridge > > >>> [PCI2] > > >>> > (0000:ff) > > >>> > > ACPI: PCI > > >>> > > > > Interrupt > > >>> > > > > > Link [LNKA] (IRQs > 3 4 > > 5 6 7 9 10 *11 > > >>> 12 14 > > >>> > 15) > > >>> > > ACPI: PCI > > >>> > > > > Interrupt Link > > >>> > > > > > [LNKB] (IRQs 3 4 5 > 6 7 > > 9 *10 11 12 14 > > >>> 15) > > >>> > ACPI: PCI > > >>> > > > Interrupt > > >>> > > > > Link > > >>> > > > > > [LNKC] (IRQs 3 4 5 > 6 7 > > *9 10 11 12 14 > > >>> 15) > > >>> > ACPI: PCI > > >>> > > > Interrupt > > >>> > > > > Link > > >>> > > > > > [LNKD] (IRQs 3 4 > *5 6 > > 7 9 10 11 12 14 > > >>> 15) > > >>> > ACPI: PCI > > >>> > > > Interrupt > > >>> > > > > Link > > >>> > > > > > [LNKE] (IRQs 3 4 5 > 6 7 > > 9 10 11 12 14 > > >>> 15) *0, > > >>> > > disabled. > > >>> > > > ACPI: PCI > > >>> > > > > > Interrupt Link > [LNKF] > > (IRQs 3 4 5 6 7 > > >>> 9 10 > > >>> > *11 12 > > >>> > > 14 15) > > >>> > > > ACPI: > > >>> > > > > PCI > > >>> > > > > > Interrupt Link > [LNKG] > > (IRQs 3 4 5 6 7 > > >>> 9 10 > > >>> > 11 12 14 > > >>> > > 15) > > >>> > > > *0, > > >>> > > > > disabled. > > >>> > > > > > ACPI: PCI > Interrupt > > Link [LNKH] (IRQs > > >>> 3 4 5 > > >>> > 6 7 9 > > >>> > > *10 11 > > >>> > > > 12 14 > > >>> > > > > 15) > > >>> > > > > > > > xenbus_probe_backend_init bus > > >>> registered ok > > >>> > > > > xenbus_probe_frontend_init > > >>> > > > > > bus registered ok > > xen_balloon: > > >>> Initialising > > >>> > balloon > > >>> > > driver > > >>> > > > with > > >>> > > > > page > > >>> > > > > > order 0. vgaarb: > > device added: > > >>> > > > > > > > >>> > > > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none > > >>> > > > vgaarb: > > >>> > > > > loaded > > >>> > > > > > SCSI subsystem > > initialized usbcore: > > >>> > registered new > > >>> > > > interface > > >>> > > > > driver > > >>> > > > > > usbfs usbcore: > > registered new > > >>> interface > > >>> > driver hub > > >>> > > > usbcore: > > >>> > > > > registered > > >>> > > > > > new device driver > usb > > PCI: Using ACPI > > >>> for > > >>> > IRQ > > >>> > > routing > > >>> > > > NetLabel: > > >>> > > > > > Initializing > NetLabel: > > domain hash > > >>> size = > > >>> > 128 > > >>> > > NetLabel: > > >>> > > > > protocols = > > >>> > > > > > UNLABELED CIPSOv4 > > NetLabel: > > >>> unlabeled > > >>> > traffic > > >>> > > allowed by > > >>> > > > default > > >>> > > > > > Switching to > > clocksource xen kstop/0 > > >>> used > > >>> > greatest > > >>> > > stack > > >>> > > > depth: > > >>> > > > > 6568 > > >>> > > > > > bytes left kstop/1 > > used greatest > > >>> stack > > >>> > depth: 6536 > > >>> > > bytes > > >>> > > > left > > >>> > > > > pnp: PnP > > >>> > > > > > ACPI init ACPI: > bus > > type pnp > > >>> registered > > >>> > > xen_allocate_pirq: > > >>> > > > > returning irq > > >>> > > > > > 8 for gsi 8 > Already > > setup the GSI :8 > > >>> > > xen_allocate_pirq: > > >>> > > > returning > > >>> > > > > irq 13 > > >>> > > > > > for gsi 13 Already > > setup the GSI :13 > > >>> pnp: > > >>> > PnP ACPI: > > >>> > > found > > >>> > > > 13 > > >>> > > > > devices > > >>> > > > > > ACPI: ACPI bus > type > > pnp unregistered > > >>> system > > >>> > 00:07: > > >>> > > ioport > > >>> > > > range > > >>> > > > > > 0x500-0x53f has > been > > reserved system > > >>> 00:07: > > >>> > ioport > > >>> > > range > > >>> > > > > 0x400-0x47f has > > >>> > > > > > been reserved > system > > 00:07: ioport > > >>> range > > >>> > > 0x800-0x81f has > > >>> > > > been > > >>> > > > > reserved > > >>> > > > > > system 00:07: > ioport > > range > > >>> 0x2f8-0x2ff has > > >>> > been > > >>> > > reserved > > >>> > > > system > > >>> > > > > 00:07: > > >>> > > > > > iomem range > > 0xfed1c000-0xfed8bffe > > >>> could not > > >>> > be > > >>> > > reserved > > >>> > > > system > > >>> > > > > 00:07: > > >>> > > > > > iomem range > > 0xff000000-0xffffffff > > >>> could not > > >>> > be > > >>> > > reserved > > >>> > > > system > > >>> > > > > 00:07: > > >>> > > > > > iomem range > > 0xfee00000-0xfeefffff has > > >>> been > > >>> > reserved > > >>> > > system > > >>> > > > 00:07: > > >>> > > > > iomem > > >>> > > > > > range > > 0xfe900000-0xfe90001f has been > > >>> > reserved > > >>> > > system > > >>> > > > 00:07: iomem > > >>> > > > > range > > >>> > > > > > > 0xfea00000-0xfea0001f > > has been > > >>> reserved > > >>> > system > > >>> > > 00:07: > > >>> > > > iomem range > > >>> > > > > > > 0xfed1b000-0xfed1bfff > > has been > > >>> reserved pci > > >>> > > 0000:0c:00.0: > > >>> > > > BAR 6: > > >>> > > > > no > > >>> > > > > > parent found for > of > > device > > >>> > [0xffff0000-0xffffffff] > > >>> > > pci > > >>> > > > > 0000:00:01.0: PCI > > >>> > > > > > bridge, secondary > bus > > 0000:01 pci > > >>> > 0000:00:01.0: > > >>> > > IO > > >>> > > > window: > > >>> > > > > > 0x1000-0x1fff pci > > 0000:00:01.0: MEM > > >>> > window: > > >>> > > > > 0xb1900000-0xb19fffff pci > > >>> > > > > > 0000:00:01.0: > > PREFETCH window: > > >>> disabled > > >>> > pci > > >>> > > > 0000:00:02.0: PCI > > >>> > > > > bridge, > > >>> > > > > > secondary bus > 0000:02 > > pci > > >>> 0000:00:02.0: IO > > >>> > > window: > > >>> > > > disabled pci > > >>> > > > > > 0000:00:02.0: > MEM > > window: disabled > > >>> pci > > >>> > > 0000:00:02.0: > > >>> > > > PREFETCH > > >>> > > > > > window: disabled > pci > > 0000:00:03.0: > > >>> PCI > > >>> > bridge, > > >>> > > secondary > > >>> > > > bus > > >>> > > > > 0000:03 pci > > >>> > > > > > 0000:00:03.0: IO > > window: disabled > > >>> pci > > >>> > > 0000:00:03.0: > > >>> > > > MEM > > >>> > > > > window: > > >>> > > > > > disabled pci > > 0000:00:03.0: PREFETCH > > >>> > window: > > >>> > > disabled pci > > >>> > > > > 0000:00:04.0: > > >>> > > > > > PCI bridge, > secondary > > bus 0000:04 pci > > >>> > 0000:00:04.0: > > >>> > > IO > > >>> > > > window: > > >>> > > > > > disabled pci > > 0000:00:04.0: MEM > > >>> window: > > >>> > disabled > > >>> > > pci > > >>> > > > > 0000:00:04.0: > > >>> > > > > > PREFETCH window: > > disabled pci > > >>> 0000:00:05.0: > > >>> > PCI > > >>> > > bridge, > > >>> > > > secondary > > >>> > > > > bus > > >>> > > > > > 0000:05 pci > > 0000:00:05.0: IO > > >>> window: > > >>> > disabled pci > > >>> > > > 0000:00:05.0: > > >>> > > > > MEM > > >>> > > > > > window: disabled > pci > > 0000:00:05.0: > > >>> > PREFETCH > > >>> > > window: > > >>> > > > disabled > > >>> > > > > pci > > >>> > > > > > 0000:00:06.0: PCI > > bridge, secondary > > >>> bus > > >>> > 0000:06 pci > > >>> > > > 0000:00:06.0: > > >>> > > > > IO > > >>> > > > > > window: disabled > pci > > 0000:00:06.0: > > >>> MEM > > >>> > window: > > >>> > > disabled > > >>> > > > pci > > >>> > > > > > 0000:00:06.0: > > PREFETCH window: > > >>> disabled > > >>> > pci > > >>> > > > 0000:00:07.0: PCI > > >>> > > > > bridge, > > >>> > > > > > secondary bus > 0000:07 > > pci > > >>> 0000:00:07.0: IO > > >>> > > window: > > >>> > > > disabled pci > > >>> > > > > > 0000:00:07.0: > MEM > > window: disabled > > >>> pci > > >>> > > 0000:00:07.0: > > >>> > > > PREFETCH > > >>> > > > > > window: disabled > pci > > 0000:00:08.0: > > >>> PCI > > >>> > bridge, > > >>> > > secondary > > >>> > > > bus > > >>> > > > > 0000:08 pci > > >>> > > > > > 0000:00:08.0: IO > > window: disabled > > >>> pci > > >>> > > 0000:00:08.0: > > >>> > > > MEM > > >>> > > > > window: > > >>> > > > > > disabled pci > > 0000:00:08.0: PREFETCH > > >>> > window: > > >>> > > disabled pci > > >>> > > > > 0000:00:09.0: > > >>> > > > > > PCI bridge, > secondary > > bus 0000:09 pci > > >>> > 0000:00:09.0: > > >>> > > IO > > >>> > > > window: > > >>> > > > > > 0x3000-0x3fff pci > > 0000:00:09.0: MEM > > >>> > window: > > >>> > > > > 0xb1b00000-0xb1cfffff pci > > >>> > > > > > 0000:00:09.0: > > PREFETCH window: > > >>> > > > > > > 0x000000b1d00000-0x000000b1efffff pci > > >>> > > > > > 0000:00:0a.0: PCI > > bridge, secondary > > >>> bus > > >>> > 0000:0a pci > > >>> > > > 0000:00:0a.0: > > >>> > > > > IO > > >>> > > > > > window: disabled > pci > > 0000:00:0a.0: > > >>> MEM > > >>> > window: > > >>> > > disabled > > >>> > > > pci > > >>> > > > > > 0000:00:0a.0: > > PREFETCH window: > > >>> disabled > > >>> > pci > > >>> > > > 0000:00:1c.0: PCI > > >>> > > > > bridge, > > >>> > > > > > secondary bus > 0000:0b > > pci > > >>> 0000:00:1c.0: IO > > >>> > > window: > > >>> > > > disabled pci > > >>> > > > > > 0000:00:1c.0: > MEM > > window: disabled > > >>> pci > > >>> > > 0000:00:1c.0: > > >>> > > > PREFETCH > > >>> > > > > > window: disabled > pci > > 0000:00:1c.4: > > >>> PCI > > >>> > bridge, > > >>> > > secondary > > >>> > > > bus > > >>> > > > > 0000:0c pci > > >>> > > > > > 0000:00:1c.4: IO > > window: disabled > > >>> pci > > >>> > > 0000:00:1c.4: > > >>> > > > MEM > > >>> > > > > window: > > >>> > > > > > > 0xb1000000-0xb18fffff > > pci > > >>> 0000:00:1c.4: > > >>> > PREFETCH > > >>> > > window: > > >>> > > > > > > > 0x000000b0000000-0x000000b0ffffff pci > > >>> > 0000:00:1c.5: > > >>> > > PCI > > >>> > > > bridge, > > >>> > > > > > secondary bus > 0000:0d > > pci > > >>> 0000:00:1c.5: IO > > >>> > > window: > > >>> > > > disabled pci > > >>> > > > > > 0000:00:1c.5: > MEM > > window: disabled > > >>> pci > > >>> > > 0000:00:1c.5: > > >>> > > > PREFETCH > > >>> > > > > > window: disabled > pci > > 0000:00:1e.0: > > >>> PCI > > >>> > bridge, > > >>> > > secondary > > >>> > > > bus > > >>> > > > > 0000:0e pci > > >>> > > > > > 0000:00:1e.0: IO > > window: disabled > > >>> pci > > >>> > > 0000:00:1e.0: > > >>> > > > MEM > > >>> > > > > window: > > >>> > > > > > disabled pci > > 0000:00:1e.0: PREFETCH > > >>> > window: > > >>> > > disabled pci > > >>> > > > > 0000:00:01.0: > > >>> > > > > > PCI INT A -> GSI > 28 > > (level, low) -> > > >>> IRQ 28 > > >>> > pci > > >>> > > > 0000:00:02.0: PCI > > >>> > > > > INT A > > >>> > > > > > -> GSI 29 (level, > > low) -> IRQ 29 pci > > >>> > 0000:00:03.0: > > >>> > > PCI INT > > >>> > > > A -> > > >>> > > > > GSI 24 > > >>> > > > > > (level, low) -> > IRQ > > 24 pci > > >>> 0000:00:04.0: PCI > > >>> > INT A > > >>> > > -> GSI > > >>> > > > 25 > > >>> > > > > (level, > > >>> > > > > > low) -> IRQ 25 > pci > > 0000:00:05.0: PCI > > >>> INT A > > >>> > -> GSI > > >>> > > 26 > > >>> > > > (level, low) > > >>> > > > > -> IRQ > > >>> > > > > > 26 pci > 0000:00:06.0: > > PCI INT A -> GSI > > >>> 27 > > >>> > (level, > > >>> > > low) -> > > >>> > > > IRQ 27 > > >>> > > > > pci > > >>> > > > > > 0000:00:07.0: PCI > INT > > A -> GSI 30 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 30 > > >>> > > > pci > > >>> > > > > > 0000:00:08.0: PCI > INT > > A -> GSI 31 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 31 > > >>> > > > pci > > >>> > > > > > 0000:00:09.0: PCI > INT > > A -> GSI 32 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 32 > > >>> > > > pci > > >>> > > > > > 0000:00:0a.0: PCI > INT > > A -> GSI 33 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 33 > > >>> > > > pci > > >>> > > > > > 0000:00:1c.0: PCI > INT > > A -> GSI 16 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 16 > > >>> > > > > > xen_allocate_pirq: > > returning irq 16 > > >>> for gsi > > >>> > 16 > > >>> > > Already > > >>> > > > setup the > > >>> > > > > GSI :16 > > >>> > > > > > pci 0000:00:1c.4: > PCI > > INT A -> GSI 16 > > >>> > (level, low) > > >>> > > -> IRQ > > >>> > > > 16 pci > > >>> > > > > > 0000:00:1c.5: PCI > INT > > B -> GSI 17 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 17 > > >>> > > > NET: > > >>> > > > > Registered > > >>> > > > > > protocol family 2 > IP > > route cache hash > > >>> table > > >>> > > entries: 65536 > > >>> > > > > (order: 7, > > >>> > > > > > 524288 bytes) TCP > > established hash > > >>> table > > >>> > entries: > > >>> > > 262144 > > >>> > > > (order: > > >>> > > > > 10, > > >>> > > > > > 4194304 bytes) TCP > > bind hash table > > >>> entries: > > >>> > 65536 > > >>> > > (order: > > >>> > > > 10, > > >>> > > > > 4718592 > > >>> > > > > > bytes) TCP: Hash > > tables configured > > >>> > (established > > >>> > > 262144 > > >>> > > > bind > > >>> > > > > 65536) TCP > > >>> > > > > > reno registered > NET: > > Registered > > >>> protocol > > >>> > family 1 > > >>> > > pci > > >>> > > > > 0000:01:00.0: > > >>> > > > > > Disabling L0s pci > > 0000:01:00.1: > > >>> Disabling > > >>> > L0s > > >>> > > Trying to > > >>> > > > unpack > > >>> > > > > rootfs > > >>> > > > > > image as > initramfs... > > Freeing initrd > > >>> memory: > > >>> > 6474k > > >>> > > freed > > >>> > > > DMA-API: > > >>> > > > > > preallocated 32768 > > debug entries > > >>> DMA-API: > > >>> > debugging > > >>> > > > enabled by > > >>> > > > > kernel > > >>> > > > > > config PCI-DMA: > Using > > software bounce > > >>> > buffering for > > >>> > > IO > > >>> > > > (SWIOTLB) > > >>> > > > > DMA: > > >>> > > > > > Placing 64MB > software > > IO TLB between > > >>> > > ffff880007525000 - > > >>> > > > > ffff88000b525000 > > >>> > > > > > DMA: software IO > TLB > > at phys > > >>> 0x7525000 - > > >>> > 0xb525000 > > >>> > > audit: > > >>> > > > > initializing > > >>> > > > > > netlink socket > > (disabled) type=2000 > > >>> > > > audit(1268750702.035:1): > > >>> > > > > initialized > > >>> > > > > > HugeTLB registered > 2 > > MB page size, > > >>> > pre-allocated 0 > > >>> > > pages > > >>> > > > VFS: > > >>> > > > > Disk > > >>> > > > > > quotas dquot_6.5.2 > > Dquot-cache hash > > >>> table > > >>> > entries: > > >>> > > 512 > > >>> > > > (order 0, > > >>> > > > > 4096 > > >>> > > > > > bytes) msgmni has > been > > set to 2970 > > >>> > cryptomgr_test > > >>> > > used > > >>> > > > greatest > > >>> > > > > stack > > >>> > > > > > depth: 5864 bytes > left > > cryptomgr_test > > >>> used > > >>> > greatest > > >>> > > stack > > >>> > > > depth: > > >>> > > > > 5816 > > >>> > > > > > bytes left alg: No > > test for stdrng > > >>> (krng) > > >>> > Block > > >>> > > layer SCSI > > >>> > > > > generic (bsg) > > >>> > > > > > driver version 0.4 > > loaded (major 252) > > >>> io > > >>> > scheduler > > >>> > > noop > > >>> > > > > registered io > > >>> > > > > > scheduler > anticipatory > > registered io > > >>> > scheduler > > >>> > > deadline > > >>> > > > > registered io > > >>> > > > > > scheduler cfq > > registered (default) > > >>> > pci_hotplug: PCI > > >>> > > Hot > > >>> > > > Plug PCI > > >>> > > > > Core > > >>> > > > > > version: 0.5 > pciehp > > >>> 0000:00:09.0:pcie04: HPC > > >>> > > vendor_id > > >>> > > > 8086 > > >>> > > > > device_id > > >>> > > > > > 3410 ss_vid 0 > ss_did 0 > > pciehp: PCI > > >>> Express > > >>> > Hot Plug > > >>> > > > Controller > > >>> > > > > Driver > > >>> > > > > > version: 0.4 > acpiphp: > > ACPI Hot Plug > > >>> PCI > > >>> > Controller > > >>> > > Driver > > >>> > > > > version: 0.5 > > >>> > > > > > acpiphp_glue: Slot > 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: Slot > 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: Slot > 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: Slot > 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: Slot > 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: Slot > 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: Slot > 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: Slot > 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > pci-stub: invalid > id > > string "" input: > > >>> Sleep > > >>> > Button > > >>> > > as > > >>> > > > > > > > >>> > > > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 > > >>> > > > ACPI: > > >>> > > > > Sleep > > >>> > > > > > Button [SLPB] > input: > > Power Button as > > >>> > > > > > > > >>> > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > ACPI: > > >>> > > Power > > >>> > > > Button > > >>> > > > > [PWRF] > > >>> > > > > > registering > netback > > hpet_acpi_add: no > > >>> > address or > > >>> > > irqs in > > >>> > > > _CRS > > >>> > > > > > Non-volatile > memory > > driver v1.3 Linux > > >>> > agpgart > > >>> > > interface > > >>> > > > v0.103 > > >>> > > > > Serial: > > >>> > > > > > 8250/16550 driver, > 4 > > ports, IRQ > > >>> sharing > > >>> > enabled > > >>> > > > serial8250: ttyS1 > > >>> > > > > at I/O > > >>> > > > > > 0x2f8 (irq = 3) is > a > > 16550A brd: > > >>> module > > >>> > loaded > > >>> > > loop: > > >>> > > > module > > >>> > > > > loaded > > >>> > > > > > input: Macintosh > mouse > > button > > >>> emulation as > > >>> > > > > > /devices/virtual/input/input2 > > >>> > > > > > ahci 0000:00:1f.2: > PCI > > INT A -> GSI > > >>> 19 > > >>> > (level, low) > > >>> > > -> IRQ > > >>> > > > 19 > > >>> > > > > ahci > > >>> > > > > > 0000:00:1f.2: AHCI > > 0001.0200 32 slots > > >>> 6 > > >>> > ports 3 > > >>> > > Gbps 0x3f > > >>> > > > impl > > >>> > > > > SATA mode > > >>> > > > > > ahci 0000:00:1f.2: > > flags: 64bit ncq > > >>> sntf pm > > >>> > led clo > > >>> > > pio > > >>> > > > slum part > > >>> > > > > ccc > > >>> > > > > > ems scsi0 : ahci > > scsi1 : ahci scsi2 > > >>> : ahci > > >>> > scsi3 : > > >>> > > ahci > > >>> > > > scsi4 : > > >>> > > > > ahci > > >>> > > > > > scsi5 : ahci ata1: > > SATA max UDMA/133 > > >>> > irq_stat > > >>> > > 0x00400040, > > >>> > > > > connection > > >>> > > > > > status changed irq > > 2996 ata2: SATA > > >>> max > > >>> > UDMA/133 > > >>> > > abar > > >>> > > > > m2048@0xb1a00000 > > >>> > > > > > port 0xb1a00180 > irq > > 2996 ata3: SATA > > >>> max > > >>> > UDMA/133 > > >>> > > abar > > >>> > > > > m2048@0xb1a00000 > > >>> > > > > > port 0xb1a00200 > irq > > 2996 ata4: SATA > > >>> max > > >>> > UDMA/133 > > >>> > > abar > > >>> > > > > m2048@0xb1a00000 > > >>> > > > > > port 0xb1a00280 > irq > > 2996 ata5: SATA > > >>> max > > >>> > UDMA/133 > > >>> > > abar > > >>> > > > > m2048@0xb1a00000 > > >>> > > > > > port 0xb1a00300 > irq > > 2996 ata6: SATA > > >>> max > > >>> > UDMA/133 > > >>> > > abar > > >>> > > > > m2048@0xb1a00000 > > >>> > > > > > port 0xb1a00380 > irq > > 2996 Fixed MDIO > > >>> Bus: > > >>> > probed > > >>> > > ehci_hcd: > > >>> > > > USB 2.0 > > >>> > > > > > 'Enhanced' Host > > Controller (EHCI) > > >>> Driver > > >>> > ehci_hcd > > >>> > > > 0000:00:1a.7: > > >>> > > > > PCI INT > > >>> > > > > > C -> GSI 18 > (level, > > low) -> IRQ 18 > > >>> ehci_hcd > > >>> > > 0000:00:1a.7: > > >>> > > > EHCI > > >>> > > > > Host > > >>> > > > > > Controller > ehci_hcd > > 0000:00:1a.7: new > > >>> USB > > >>> > bus > > >>> > > registered, > > >>> > > > > assigned bus > > >>> > > > > > number 1 ehci_hcd > > 0000:00:1a.7: debug > > >>> port 1 > > >>> > > ehci_hcd > > >>> > > > > 0000:00:1a.7: irq > > >>> > > > > > 18, io mem > 0xb1a02000 > > ehci_hcd > > >>> 0000:00:1a.7: > > >>> > USB > > >>> > > 2.0 > > >>> > > > started, > > >>> > > > > EHCI 1.00 > > >>> > > > > > usb usb1: New USB > > device found, > > >>> > idVendor=1d6b, > > >>> > > > idProduct=0002 usb > > >>> > > > > usb1: > > >>> > > > > > New USB device > > strings: Mfr=3, > > >>> Product=2, > > >>> > > SerialNumber=1 > > >>> > > > usb > > >>> > > > > usb1: > > >>> > > > > > Product: EHCI Host > > Controller usb > > >>> usb1: > > >>> > > Manufacturer: > > >>> > > > Linux > > >>> > > > > 2.6.32.9 > > >>> > > > > > ehci_hcd usb usb1: > > SerialNumber: > > >>> > 0000:00:1a.7 usb > > >>> > > usb1: > > >>> > > > > configuration #1 > > >>> > > > > > chosen from 1 > choice > > hub 1-0:1.0: USB > > >>> hub > > >>> > found hub > > >>> > > > 1-0:1.0: 6 > > >>> > > > > ports > > >>> > > > > > detected ehci_hcd > > 0000:00:1d.7: PCI > > >>> INT A -> > > >>> > GSI 23 > > >>> > > > (level, low) > > >>> > > > > -> IRQ > > >>> > > > > > 23 ehci_hcd > > 0000:00:1d.7: EHCI Host > > >>> > Controller > > >>> > > ehci_hcd > > >>> > > > > 0000:00:1d.7: > > >>> > > > > > new USB bus > > registered, assigned bus > > >>> number > > >>> > 2 > > >>> > > ehci_hcd > > >>> > > > > 0000:00:1d.7: > > >>> > > > > > debug port 1 > ehci_hcd > > 0000:00:1d.7: > > >>> irq 23, > > >>> > io mem > > >>> > > > 0xb1a01000 > > >>> > > > > ehci_hcd > > >>> > > > > > 0000:00:1d.7: USB > 2.0 > > started, EHCI > > >>> 1.00 usb > > >>> > usb2: > > >>> > > New USB > > >>> > > > device > > >>> > > > > found, > > >>> > > > > > idVendor=1d6b, > > idProduct=0002 usb > > >>> usb2: New > > >>> > USB > > >>> > > device > > >>> > > > strings: > > >>> > > > > Mfr=3, > > >>> > > > > > Product=2, > > SerialNumber=1 usb usb2: > > >>> Product: > > >>> > EHCI > > >>> > > Host > > >>> > > > Controller > > >>> > > > > usb > > >>> > > > > > usb2: > Manufacturer: > > Linux 2.6.32.9 > > >>> ehci_hcd > > >>> > usb > > >>> > > usb2: > > >>> > > > > SerialNumber: > > >>> > > > > > 0000:00:1d.7 usb > usb2: > > configuration > > >>> #1 > > >>> > chosen from > > >>> > > 1 > > >>> > > > choice hub > > >>> > > > > > 2-0:1.0: USB hub > found > > hub 2-0:1.0: 6 > > >>> ports > > >>> > > detected > > >>> > > > ohci_hcd: > > >>> > > > > USB 1.1 > > >>> > > > > > 'Open' Host > Controller > > (OHCI) Driver > > >>> > uhci_hcd: USB > > >>> > > > Universal Host > > >>> > > > > > Controller > Interface > > driver > > >>> > xen_allocate_pirq: > > >>> > > returning > > >>> > > > irq 16 > > >>> > > > > for gsi > > >>> > > > > > 16 Already setup > the > > GSI :16 uhci_hcd > > >>> > 0000:00:1a.0: > > >>> > > PCI > > >>> > > > INT A -> > > >>> > > > > GSI 16 > > >>> > > > > > (level, low) -> > IRQ > > 16 uhci_hcd > > >>> > 0000:00:1a.0: UHCI > > >>> > > Host > > >>> > > > > Controller > > >>> > > > > > uhci_hcd > 0000:00:1a.0: > > new USB bus > > >>> > registered, > > >>> > > assigned > > >>> > > > bus > > >>> > > > > number 3 > > >>> > > > > > uhci_hcd > 0000:00:1a.0: > > irq 16, io > > >>> base > > >>> > 0x000020e0 > > >>> > > usb > > >>> > > > usb3: New > > >>> > > > > USB > > >>> > > > > > device found, > > idVendor=1d6b, > > >>> idProduct=0001 > > >>> > usb > > >>> > > usb3: New > > >>> > > > USB > > >>> > > > > device > > >>> > > > > > strings: Mfr=3, > > Product=2, > > >>> SerialNumber=1 > > >>> > usb usb3: > > >>> > > > Product: UHCI > > >>> > > > > Host > > >>> > > > > > Controller usb > usb3: > > Manufacturer: > > >>> Linux > > >>> > 2.6.32.9 > > >>> > > uhci_hcd > > >>> > > > usb > > >>> > > > > usb3: > > >>> > > > > > SerialNumber: > > 0000:00:1a.0 usb usb3: > > >>> > configuration > > >>> > > #1 > > >>> > > > chosen from > > >>> > > > > 1 > > >>> > > > > > choice hub > 3-0:1.0: > > USB hub found hub > > >>> > 3-0:1.0: 2 > > >>> > > ports > > >>> > > > detected > > >>> > > > > uhci_hcd > > >>> > > > > > 0000:00:1a.1: PCI > INT > > B -> GSI 21 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 21 > > >>> > > > uhci_hcd > > >>> > > > > > 0000:00:1a.1: UHCI > > Host Controller > > >>> uhci_hcd > > >>> > > 0000:00:1a.1: > > >>> > > > new USB > > >>> > > > > bus > > >>> > > > > > registered, > assigned > > bus number 4 > > >>> uhci_hcd > > >>> > > 0000:00:1a.1: > > >>> > > > irq 21, > > >>> > > > > io base > > >>> > > > > > 0x000020c0 usb > usb4: > > New USB device > > >>> found, > > >>> > > idVendor=1d6b, > > >>> > > > > idProduct=0001 > > >>> > > > > > usb usb4: New USB > > device strings: > > >>> Mfr=3, > > >>> > Product=2, > > >>> > > > > SerialNumber=1 usb > > >>> > > > > > usb4: Product: > UHCI > > Host Controller > > >>> usb > > >>> > usb4: > > >>> > > > Manufacturer: Linux > > >>> > > > > > 2.6.32.9 uhci_hcd > usb > > usb4: > > >>> SerialNumber: > > >>> > > 0000:00:1a.1 usb > > >>> > > > usb4: > > >>> > > > > > configuration #1 > > chosen from 1 choice > > >>> hub > > >>> > 4-0:1.0: > > >>> > > USB hub > > >>> > > > found > > >>> > > > > hub > > >>> > > > > > 4-0:1.0: 2 ports > > detected > > >>> xen_allocate_pirq: > > >>> > > returning irq > > >>> > > > 19 for > > >>> > > > > gsi 19 > > >>> > > > > > Already setup the > GSI > > :19 uhci_hcd > > >>> > 0000:00:1a.2: > > >>> > > PCI INT D > > >>> > > > -> GSI > > >>> > > > > 19 > > >>> > > > > > (level, low) -> > IRQ > > 19 uhci_hcd > > >>> > 0000:00:1a.2: UHCI > > >>> > > Host > > >>> > > > > Controller > > >>> > > > > > uhci_hcd > 0000:00:1a.2: > > new USB bus > > >>> > registered, > > >>> > > assigned > > >>> > > > bus > > >>> > > > > number 5 > > >>> > > > > > uhci_hcd > 0000:00:1a.2: > > irq 19, io > > >>> base > > >>> > 0x000020a0 > > >>> > > usb > > >>> > > > usb5: New > > >>> > > > > USB > > >>> > > > > > device found, > > idVendor=1d6b, > > >>> idProduct=0001 > > >>> > usb > > >>> > > usb5: New > > >>> > > > USB > > >>> > > > > device > > >>> > > > > > strings: Mfr=3, > > Product=2, > > >>> SerialNumber=1 > > >>> > usb usb5: > > >>> > > > Product: UHCI > > >>> > > > > Host > > >>> > > > > > Controller usb > usb5: > > Manufacturer: > > >>> Linux > > >>> > 2.6.32.9 > > >>> > > uhci_hcd > > >>> > > > usb > > >>> > > > > usb5: > > >>> > > > > > SerialNumber: > > 0000:00:1a.2 usb usb5: > > >>> > configuration > > >>> > > #1 > > >>> > > > chosen from > > >>> > > > > 1 > > >>> > > > > > choice hub > 5-0:1.0: > > USB hub found hub > > >>> > 5-0:1.0: 2 > > >>> > > ports > > >>> > > > detected > > >>> > > > > > xen_allocate_pirq: > > returning irq 23 > > >>> for gsi > > >>> > 23 > > >>> > > Already > > >>> > > > setup the > > >>> > > > > GSI :23 > > >>> > > > > > uhci_hcd > 0000:00:1d.0: > > PCI INT A -> > > >>> GSI 23 > > >>> > (level, > > >>> > > low) -> > > >>> > > > IRQ 23 > > >>> > > > > > uhci_hcd > 0000:00:1d.0: > > UHCI Host > > >>> Controller > > >>> > > uhci_hcd > > >>> > > > > 0000:00:1d.0: new > > >>> > > > > > USB bus > registered, > > assigned bus > > >>> number 6 > > >>> > uhci_hcd > > >>> > > > 0000:00:1d.0: > > >>> > > > > irq 23, > > >>> > > > > > io base 0x00002080 > usb > > usb6: New USB > > >>> device > > >>> > found, > > >>> > > > idVendor=1d6b, > > >>> > > > > > idProduct=0001 usb > > usb6: New USB > > >>> device > > >>> > strings: > > >>> > > Mfr=3, > > >>> > > > > Product=2, > > >>> > > > > > SerialNumber=1 usb > > usb6: Product: > > >>> UHCI Host > > >>> > > Controller usb > > >>> > > > usb6: > > >>> > > > > > Manufacturer: > Linux > > 2.6.32.9 uhci_hcd > > >>> usb > > >>> > usb6: > > >>> > > > SerialNumber: > > >>> > > > > > 0000:00:1d.0 usb > usb6: > > configuration > > >>> #1 > > >>> > chosen from > > >>> > > 1 > > >>> > > > choice hub > > >>> > > > > > 6-0:1.0: USB hub > found > > hub 6-0:1.0: 2 > > >>> ports > > >>> > > detected > > >>> > > > > xen_allocate_pirq: > > >>> > > > > > returning irq 19 > for > > gsi 19 Already > > >>> setup > > >>> > the GSI > > >>> > > :19 > > >>> > > > uhci_hcd > > >>> > > > > > 0000:00:1d.1: PCI > INT > > B -> GSI 19 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 19 > > >>> > > > uhci_hcd > > >>> > > > > > 0000:00:1d.1: UHCI > > Host Controller > > >>> uhci_hcd > > >>> > > 0000:00:1d.1: > > >>> > > > new USB > > >>> > > > > bus > > >>> > > > > > registered, > assigned > > bus number 7 > > >>> uhci_hcd > > >>> > > 0000:00:1d.1: > > >>> > > > irq 19, > > >>> > > > > io base > > >>> > > > > > 0x00002060 usb > usb7: > > New USB device > > >>> found, > > >>> > > idVendor=1d6b, > > >>> > > > > idProduct=0001 > > >>> > > > > > usb usb7: New USB > > device strings: > > >>> Mfr=3, > > >>> > Product=2, > > >>> > > > > SerialNumber=1 usb > > >>> > > > > > usb7: Product: > UHCI > > Host Controller > > >>> usb > > >>> > usb7: > > >>> > > > Manufacturer: Linux > > >>> > > > > > 2.6.32.9 uhci_hcd > usb > > usb7: > > >>> SerialNumber: > > >>> > > 0000:00:1d.1 usb > > >>> > > > usb7: > > >>> > > > > > configuration #1 > > chosen from 1 choice > > >>> hub > > >>> > 7-0:1.0: > > >>> > > USB hub > > >>> > > > found > > >>> > > > > hub > > >>> > > > > > 7-0:1.0: 2 ports > > detected > > >>> xen_allocate_pirq: > > >>> > > returning irq > > >>> > > > 18 for > > >>> > > > > gsi 18 > > >>> > > > > > Already setup the > GSI > > :18 uhci_hcd > > >>> > 0000:00:1d.2: > > >>> > > PCI INT C > > >>> > > > -> GSI > > >>> > > > > 18 > > >>> > > > > > (level, low) -> > IRQ > > 18 uhci_hcd > > >>> > 0000:00:1d.2: UHCI > > >>> > > Host > > >>> > > > > Controller > > >>> > > > > > uhci_hcd > 0000:00:1d.2: > > new USB bus > > >>> > registered, > > >>> > > assigned > > >>> > > > bus > > >>> > > > > number 8 > > >>> > > > > > uhci_hcd > 0000:00:1d.2: > > irq 18, io > > >>> base > > >>> > 0x00002040 > > >>> > > usb > > >>> > > > usb8: New > > >>> > > > > USB > > >>> > > > > > device found, > > idVendor=1d6b, > > >>> idProduct=0001 > > >>> > usb > > >>> > > usb8: New > > >>> > > > USB > > >>> > > > > device > > >>> > > > > > strings: Mfr=3, > > Product=2, > > >>> SerialNumber=1 > > >>> > usb usb8: > > >>> > > > Product: UHCI > > >>> > > > > Host > > >>> > > > > > >>> > > > > >>> > > References > > >>> > > > > >>> > > Visible links > > >>> > > 1. mailto:[20][21][22]pasik@iki.fi > > >>> > > 2. mailto:[21][22][23]pasik@iki.fi > > >>> > > 3. mailto:[22][23][24]pasik@iki.fi > > >>> > > 4. mailto:[23][24][25]pasik@iki.fi > > >>> > > 5. mailto:[24][25][26]pasik@iki.fi > > >>> > > 6. > > >>> > > > >>> > > [25][26][27] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > 7. > > >>> > > > >>> > > [26][27][28] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > 8. mailto:[27][28][29]pasik@iki.fi > > >>> > > 9. > > >>> > > > >>> > > [28][29][30] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > 10. > > >>> > > > >>> > > [29][30][31] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > 11. mailto:[30][31][32]pasik@iki.fi > > >>> > > 12. mailto:[31][32][33]pasik@iki.fi > > >>> > > 13. > > >>> > > > >>> > > [32][33][34] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > 14. > > >>> > > > >>> > > [33][34][35] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > 15. mailto:[34][35][36]pasik@iki.fi > > >>> > > 16. > > >>> > > > >>> > > [35][36][37] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > 17. > > >>> > > > >>> > > [36][37][38] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > 18. mailto:[37][38][39]pasik@iki.fi > > >>> > > > >>> > References > > >>> > > > >>> > Visible links > > >>> > 1. mailto:[39][40]pasik@iki.fi > > >>> > 2. mailto:[40][41]pasik@iki.fi > > >>> > 3. mailto:[41][42]pasik@iki.fi > > >>> > 4. mailto:[42][43]pasik@iki.fi > > >>> > 5. mailto:[43][44]pasik@iki.fi > > >>> > 6. mailto:[44][45]pasik@iki.fi > > >>> > 7. > > >>> > > [45][46] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 8. > > >>> > > [46][47] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 9. mailto:[47][48]pasik@iki.fi > > >>> > 10. > > >>> > > [48][49] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 11. > > >>> > > [49][50] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 12. mailto:[50][51]pasik@iki.fi > > >>> > 13. mailto:[51][52]pasik@iki.fi > > >>> > 14. > > >>> > > [52][53] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 15. > > >>> > > [53][54] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 16. mailto:[54][55]pasik@iki.fi > > >>> > 17. > > >>> > > [55][56] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 18. > > >>> > > [56][57] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 19. mailto:[57][58]pasik@iki.fi > > >>> > 20. mailto:[58][59]pasik@iki.fi > > >>> > 21. mailto:[59][60]pasik@iki.fi > > >>> > 22. mailto:[60][61]pasik@iki.fi > > >>> > 23. mailto:[61][62]pasik@iki.fi > > >>> > 24. mailto:[62][63]pasik@iki.fi > > >>> > 25. > > >>> > > [63][64] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 26. > > >>> > > [64][65] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 27. mailto:[65][66]pasik@iki.fi > > >>> > 28. > > >>> > > [66][67] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 29. > > >>> > > [67][68] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 30. mailto:[68][69]pasik@iki.fi > > >>> > 31. mailto:[69][70]pasik@iki.fi > > >>> > 32. > > >>> > > [70][71] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 33. > > >>> > > [71][72] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 34. mailto:[72][73]pasik@iki.fi > > >>> > 35. > > >>> > > [73][74] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 36. > > >>> > > [74][75] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 37. mailto:[75][76]pasik@iki.fi > > >>> > > >>> References > > >>> > > >>> Visible links > > >>> 1. mailto:[77]pasik@iki.fi > > >>> 2. mailto:[78]pasik@iki.fi > > >>> 3. mailto:[79]pasik@iki.fi > > >>> 4. mailto:[80]pasik@iki.fi > > >>> 5. mailto:[81]pasik@iki.fi > > >>> 6. mailto:[82]pasik@iki.fi > > >>> 7. mailto:[83]pasik@iki.fi > > >>> 8. > > [84]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 9. > > [85] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 10. mailto:[86]pasik@iki.fi > > >>> 11. > > [87]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 12. > > [88] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 13. mailto:[89]pasik@iki.fi > > >>> 14. mailto:[90]pasik@iki.fi > > >>> 15. > > [91]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 16. > > [92] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 17. mailto:[93]pasik@iki.fi > > >>> 18. > > [94]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 19. > > [95] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 20. mailto:[96]pasik@iki.fi > > >>> 21. mailto:[97]pasik@iki.fi > > >>> 22. mailto:[98]pasik@iki.fi > > >>> 23. mailto:[99]pasik@iki.fi > > >>> 24. mailto:[100]pasik@iki.fi > > >>> 25. mailto:[101]pasik@iki.fi > > >>> 26. > > [102]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 27. > > [103] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 28. mailto:[104]pasik@iki.fi > > >>> 29. > > [105]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 30. > > [106] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 31. mailto:[107]pasik@iki.fi > > >>> 32. mailto:[108]pasik@iki.fi > > >>> 33. > > [109]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 34. > > [110] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 35. mailto:[111]pasik@iki.fi > > >>> 36. > > [112]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 37. > > [113] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 38. mailto:[114]pasik@iki.fi > > >>> 39. mailto:[115]pasik@iki.fi > > >>> 40. mailto:[116]pasik@iki.fi > > >>> 41. mailto:[117]pasik@iki.fi > > >>> 42. mailto:[118]pasik@iki.fi > > >>> 43. mailto:[119]pasik@iki.fi > > >>> 44. mailto:[120]pasik@iki.fi > > >>> 45. > > [121]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 46. > > [122] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 47. mailto:[123]pasik@iki.fi > > >>> 48. > > [124]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 49. > > [125] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 50. mailto:[126]pasik@iki.fi > > >>> 51. mailto:[127]pasik@iki.fi > > >>> 52. > > [128]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 53. > > [129] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 54. mailto:[130]pasik@iki.fi > > >>> 55. > > [131]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 56. > > [132] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 57. mailto:[133]pasik@iki.fi > > >>> 58. mailto:[134]pasik@iki.fi > > >>> 59. mailto:[135]pasik@iki.fi > > >>> 60. mailto:[136]pasik@iki.fi > > >>> 61. mailto:[137]pasik@iki.fi > > >>> 62. mailto:[138]pasik@iki.fi > > >>> 63. > > [139]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 64. > > [140] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 65. mailto:[141]pasik@iki.fi > > >>> 66. > > [142]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 67. > > [143] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 68. mailto:[144]pasik@iki.fi > > >>> 69. mailto:[145]pasik@iki.fi > > >>> 70. > > [146]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 71. > > [147] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 72. mailto:[148]pasik@iki.fi > > >>> 73. > > [149]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 74. > > [150] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 75. mailto:[151]pasik@iki.fi > > >>> > > >> > > >> > > > > > > > References > > > > Visible links > > 1. mailto:pasik@iki.fi > > 2. mailto:pasik@iki.fi > > 3. mailto:pasik@iki.fi > > 4. mailto:pasik@iki.fi > > 5. mailto:pasik@iki.fi > > 6. mailto:pasik@iki.fi > > 7. mailto:pasik@iki.fi > > 8. mailto:pasik@iki.fi > > 9. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 10. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 11. mailto:pasik@iki.fi > > 12. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 13. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 14. mailto:pasik@iki.fi > > 15. mailto:pasik@iki.fi > > 16. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 17. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 18. mailto:pasik@iki.fi > > 19. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 20. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 21. mailto:pasik@iki.fi > > 22. mailto:pasik@iki.fi > > 23. mailto:pasik@iki.fi > > 24. mailto:pasik@iki.fi > > 25. mailto:pasik@iki.fi > > 26. mailto:pasik@iki.fi > > 27. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 28. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 29. mailto:pasik@iki.fi > > 30. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 31. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 32. mailto:pasik@iki.fi > > 33. mailto:pasik@iki.fi > > 34. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 35. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 36. mailto:pasik@iki.fi > > 37. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 38. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 39. mailto:pasik@iki.fi > > 40. mailto:pasik@iki.fi > > 41. mailto:pasik@iki.fi > > 42. mailto:pasik@iki.fi > > 43. mailto:pasik@iki.fi > > 44. mailto:pasik@iki.fi > > 45. mailto:pasik@iki.fi > > 46. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 47. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 48. mailto:pasik@iki.fi > > 49. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 50. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 51. mailto:pasik@iki.fi > > 52. mailto:pasik@iki.fi > > 53. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 54. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 55. mailto:pasik@iki.fi > > 56. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 57. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 58. mailto:pasik@iki.fi > > 59. mailto:pasik@iki.fi > > 60. mailto:pasik@iki.fi > > 61. mailto:pasik@iki.fi > > 62. mailto:pasik@iki.fi > > 63. mailto:pasik@iki.fi > > 64. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 65. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 66. mailto:pasik@iki.fi > > 67. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 68. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 69. mailto:pasik@iki.fi > > 70. mailto:pasik@iki.fi > > 71. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 72. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 73. mailto:pasik@iki.fi > > 74. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 75. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 76. mailto:pasik@iki.fi > > 77. mailto:pasik@iki.fi > > 78. mailto:pasik@iki.fi > > 79. mailto:pasik@iki.fi > > 80. mailto:pasik@iki.fi > > 81. mailto:pasik@iki.fi > > 82. mailto:pasik@iki.fi > > 83. mailto:pasik@iki.fi > > 84. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 85. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 86. mailto:pasik@iki.fi > > 87. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 88. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 89. mailto:pasik@iki.fi > > 90. mailto:pasik@iki.fi > > 91. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 92. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 93. mailto:pasik@iki.fi > > 94. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 95. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 96. mailto:pasik@iki.fi > > 97. mailto:pasik@iki.fi > > 98. mailto:pasik@iki.fi > > 99. mailto:pasik@iki.fi > > 100. mailto:pasik@iki.fi > > 101. mailto:pasik@iki.fi > > 102. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 103. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 104. mailto:pasik@iki.fi > > 105. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 106. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 107. mailto:pasik@iki.fi > > 108. mailto:pasik@iki.fi > > 109. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 110. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 111. mailto:pasik@iki.fi > > 112. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 113. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 114. mailto:pasik@iki.fi > > 115. mailto:pasik@iki.fi > > 116. mailto:pasik@iki.fi > > 117. mailto:pasik@iki.fi > > 118. mailto:pasik@iki.fi > > 119. mailto:pasik@iki.fi > > 120. mailto:pasik@iki.fi > > 121. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 122. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 123. mailto:pasik@iki.fi > > 124. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 125. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 126. mailto:pasik@iki.fi > > 127. mailto:pasik@iki.fi > > 128. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 129. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 130. mailto:pasik@iki.fi > > 131. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 132. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 133. mailto:pasik@iki.fi > > 134. mailto:pasik@iki.fi > > 135. mailto:pasik@iki.fi > > 136. mailto:pasik@iki.fi > > 137. mailto:pasik@iki.fi > > 138. mailto:pasik@iki.fi > > 139. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 140. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 141. mailto:pasik@iki.fi > > 142. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 143. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 144. mailto:pasik@iki.fi > > 145. mailto:pasik@iki.fi > > 146. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 147. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 148. mailto:pasik@iki.fi > > 149. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 150. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 151. mailto:pasik@iki.fi > > > > [-- Attachment #1.2: Type: text/html, Size: 303346 bytes --] [-- Attachment #2: mar_22.doc --] [-- Type: application/msword, Size: 154813 bytes --] [-- Attachment #3: Type: text/plain, Size: 137 bytes --] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: crash in print_all_ICs() 2010-03-22 20:23 ` kishore kumar @ 2010-03-22 20:31 ` Pasi Kärkkäinen 2010-03-22 21:48 ` kishore kumar 0 siblings, 1 reply; 32+ messages in thread From: Pasi Kärkkäinen @ 2010-03-22 20:31 UTC (permalink / raw) To: kishore kumar; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users On Mon, Mar 22, 2010 at 01:23:24PM -0700, kishore kumar wrote: > xend was not running so I did below steps and rebooted. The system did > not boot up. SO I removed the line added in /proc/fstab and again > rebooted. Attached is the captured file. Can you please let me know what > is going wrong again? > Please send the logs as text files, not word documents! Mounting root filesystem. mount: could not find filesystem '/dev/root' Setting up other filesystems. Setting up new root fs setuproot: moving /dev failed: No such file or directory no fstab.sys, mounting internal defaults setuproot: error mounting /proc: No such file or directory setuproot: error mounting /sys: No such file or directory Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys switchroot: mount failed: No such file or directory Looks like wrong root= parameter again.. Command line: ro root=/dev/VolGroup01/Logvol00 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10 Was "/dev/VolGroup01/Logvol00" your root device? -- Pasi > step 1. I loaded the xen-evtchn.ko by insmod. > > > > step 2: And added the below line in /proc/fstab. > > > > none /proc/xen xenfs defaults 0 0 > > > Thanks > > On Fri, Mar 19, 2010 at 1:03 PM, Pasi Kärkkäinen <[1]pasik@iki.fi> wrote: > > On Fri, Mar 19, 2010 at 12:57:58PM -0700, kishore kumar wrote: > > Attached is the captured file. > > > > Now the machine booted up. :) 2.6.32.10 is booted. > > > > But I dont see xen up and running. > > > > Whe I open Virtual Machine Manager I dont see xen running. > (ATTACHED IS > > THE SCREEN SHOT). > > > > - Do you have /proc/xen (xenfs) mounted? > - Do you have xen-evtchn driver module loaded in dom0? > - Do you have xend running? > > Please see and read this wiki page: > [2]http://wiki.xensource.com/xenwiki/XenParavirtOps > > It explains the other configurations you need to do for Xen/xend to > actually work. > > Anyway, the problem for you was wrong grub.conf root= option for the > dom0 kernel. > > -- Pasi > > > On Fri, Mar 19, 2010 at 12:05 PM, Pasi Kärkkäinen > <[1][3]pasik@iki.fi> wrote: > > > > On Fri, Mar 19, 2010 at 11:22:54AM -0700, Jeremy Fitzhardinge > wrote: > > > On 03/19/2010 10:59 AM, Pasi Kärkkäinen wrote: > > >> On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar wrote: > > >> > > >>> Attached is the capture log after changing the grub.conf > to > > >>> > > >>> ro root=/dev/VolGroup01/LogVol00 console=hvc0 > earlyprintk=xen > > nomodeset > > >>> initcall_debug debug swiotlb=force apic=debug loglevel=10 > > >>> > > >>> for the dom 0 kernel command line. > > >>> > > >>> > > >> Hmm, interesting. Now it seems to crash in a different place. > > >> > > >> Jeremy: Have you seen this one earlier? > > >> > > > > > > No, but it looks like the result of "apic=debug" on the kernel > command > > > line. That won't do anything useful (the kernel has no APICs, > they > > all > > > belong to Xen), and can only cause harm. As it appears to have > done. > > > > > > > Ok, my bad. > > > > So please remove the "apic=debug" from the dom0 kernel cmdline > and try > > again. > > It should look like this: > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen > nomodeset > > initcall_debug debug loglevel=10 > > > > -- Pasi > > > > > J > > > > > >> .... IRQ redirection table: > > >> NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: > > >> 00 000 0 0 0 0 0 0 0 00 > > >> IRQ to pin mappings: > > >> BUG: unable to handle kernel NULL pointer dereference at > (null) > > >> IP: [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 > > >> PGD 0 > > >> Oops: 0000 [#1] SMP > > >> last sysfs file: > > >> CPU 0 > > >> Modules linked in: > > >> Pid: 1, comm: swapper Not tainted 2.6.32.10 #2 > > >> RIP: e030:[<ffffffff819bf0e0>] [<ffffffff819bf0e0>] > > print_all_ICs+0x487/0x500 > > >> RSP: e02b:ffff880064edbe20 EFLAGS: 00010286 > > >> RAX: ffffffff816ed2c0 RBX: 0000000000000000 RCX: > 000000000f640f01 > > >> RDX: ffff880066808000 RSI: ffff880064edbd40 RDI: > 0000000000000000 > > >> RBP: ffff880064edbea0 R08: 0000000000000002 R09: > 0000000000000000 > > >> R10: 0000000000000000 R11: ffff880064edbce0 R12: > 0000000000000000 > > >> R13: 0000000000000000 R14: 0000000000000000 R15: > 0000000000000000 > > >> FS: 0000000000000000(0000) GS:ffff880005ec8000(0000) > > knlGS:0000000000000000 > > >> CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b > > >> CR2: 0000000000000000 CR3: 0000000001001000 CR4: > 0000000000002660 > > >> DR0: 0000000000000000 DR1: 0000000000000000 DR2: > 0000000000000000 > > >> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: > 0000000000000400 > > >> Process swapper (pid: 1, threadinfo ffff880064eda000, task > > ffff880064ee0000) > > >> Stack: > > >> ffff880000000000 ffffffff00000000 ffff880000000000 > ffffffff811ebee8 > > >> <0> ffff880064edbe60 0000000181083e7c 000000ff00000002 > > 0000000000000002 > > >> <0> ffff880000000000 ffffffff810846f0 ffffffff817ce660 > > 00000000291fd332 > > >> Call Trace: > > >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e > > >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93 > > >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 > > >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc > > >> [<ffffffff81013eaa>] child_rip+0xa/0x20 > > >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > > >> [<ffffffff81013810>] ? restore_args+0x0/0x30 > > >> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 > > >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20 > > >> Code: 45 b0 0f 8c 5b fd ff ff 48 c7 c7 34 40 60 81 31 c0 45 31 > e4 e8 > > 11 d5 69 ff 31 ff e8 67 b5 6f ff eb 5a 48 85 c0 74 4a 48 8b 58 > 40<48> > > 83 3b 00 74 40 44 89 e6 48 c7 c7 4d 40 60 81 31 c0 e8 e8 d4 > > >> RIP [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 > > >> RSP<ffff880064edbe20> > > >> CR2: 0000000000000000 > > >> ---[ end trace 0007ad9d59420718 ]--- > > >> swapper used greatest stack depth: 4168 bytes left > > >> Kernel panic - not syncing: Attempted to kill init! > > >> Pid: 1, comm: swapper Tainted: G D 2.6.32.10 #2 > > >> Call Trace: > > >> [<ffffffff8105b747>] panic+0xa5/0x167 > > >> [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf > > >> [<ffffffff8105f2b3>] ? do_exit+0x38a/0x701 > > >> [<ffffffff8100f43f>] ? xen_restore_fl_direct_end+0x0/0x1 > > >> [<ffffffff8108f823>] ? lock_release+0x179/0x184 > > >> [<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf > > >> [<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c > > >> [<ffffffff8105efa7>] do_exit+0x7e/0x701 > > >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef > > >> [<ffffffff8147764c>] oops_end+0xbf/0xc7 > > >> [<ffffffff81038a02>] no_context+0x1f1/0x200 > > >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef > > >> [<ffffffff81038c61>] __bad_area_nosemaphore+0x191/0x1b4 > > >> [<ffffffff8100f452>] ? check_events+0x12/0x20 > > >> [<ffffffff81038d0e>] bad_area_nosemaphore+0x13/0x15 > > >> [<ffffffff81478b20>] do_page_fault+0x16d/0x2a2 > > >> [<ffffffff814769d5>] page_fault+0x25/0x30 > > >> [<ffffffff819bf0e0>] ? print_all_ICs+0x487/0x500 > > >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e > > >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93 > > >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 > > >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc > > >> [<ffffffff81013eaa>] child_rip+0xa/0x20 > > >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > > >> [<ffffffff81013810>] ? restore_args+0x0/0x30 > > >> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 > > >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20 > > >> > > >> > > >> -- Pasi > > >> > > >> > > >> > > >>> > > >>> On Thu, Mar 18, 2010 at 2:27 PM, Pasi > > Kärkkäinen<[1][2][4]pasik@iki.fi> wrote: > > >>> > > >>> On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar > wrote: > > >>> > pvdisplay does not work in my RHEL machine. > > >>> > > > >>> > I did pvscan. > > >>> > below is the output. > > >>> > > > >>> > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 > free] > > >>> > > > >>> > Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in > no VG: > > 0 [0 ] > > >>> > > > >>> > > >>> Ok so /dev/sda2 is the correct device holding the > VolGroup01. > > >>> > > >>> Looking at your latest capture.doc I see this: > > >>> > > >>> Command line: ro root=/dev/vg00/lv01 console=hvc0 > > earlyprintk=xen > > >>> nomodeset initcall_debug debug swiotlb=force apic=debug > > loglevel=10 > > >>> > > >>> So your root= parameter is wrong! Edit grub.conf and > replace > > it with the > > >>> actual root device: > > >>> root=/dev/VolGroup01/LogVol00 > > >>> > > >>> -- Pasi > > >>> > > >>> > On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen > > >>> <[1][2][3][5]pasik@iki.fi> wrote: > > >>> > > > >>> > On Thu, Mar 18, 2010 at 11:16:26AM -0700, > kishore > > kumar wrote: > > >>> > > I did the below steps for pvops dom 0 > kernel. > > >>> > > > > >>> > > make menuconfig > > >>> > > make bzImage > > >>> > > make modules > > >>> > > make modules_install > > >>> > > cp -a .config /boot/config-2.6.32.10 > > >>> > > cp -a System.map > /boot/System.map-2.6.32.10 > > >>> > > cp -a arch/x86/boot/bzImage > > /boot/vmlinuz-2.6.32.10 > > >>> > > /sbin/mkinitrd -f --builtin=ahci > > /boot/initrd-2.6.32.10.img > > >>> > 2.6.32.10 > > >>> > > I tried root=/dev/VolGroup01/LogVol00 . > > >>> > > > > >>> > > > >>> > Ok. > > >>> > > > >>> > Please run "pvdisplay" to see which actual > partition > > is the LVM > > >>> PV for > > >>> > your > > >>> > volume group. > > >>> > > > >>> > Also if you're running Fedora 12 you could try > > generating an > > >>> initrd > > >>> > image > > >>> > with dracut instead of mkinitrd. > > >>> > > > >>> > -- Pasi > > >>> > > > >>> > > > > >>> > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi > Kärkkäinen > > >>> > <[1][2][3][4][6]pasik@iki.fi> wrote: > > >>> > > > > >>> > > On Wed, Mar 17, 2010 at 03:20:13PM > -0700, > > kishore kumar > > >>> wrote: > > >>> > > > Here is the output of df -h and > cat > > /etc/fstab of my > > >>> > machine. > > >>> > > > > > >>> > > > > >>> > > Did you try both > > root=/dev/mapper/VolGroup01-LogVol00 and > > >>> > > root=/dev/VolGroup01/LogVol00 arguments > for > > the dom0 > > >>> kernel? > > >>> > > > > >>> > > How did you generate the initrd image > for the > > dom0 kernel? > > >>> > > > > >>> > > Anyway this sounds like a grub.conf or > initrd > > problem, not > > >>> Xen or > > >>> > pvops > > >>> > > dom0 kernel kernel problem. > > >>> > > > > >>> > > -- Pasi > > >>> > > > > >>> > > > Please let me know your thoughts. > > >>> > > > > > >>> > > > [root@localhost kishore]# df -h > > >>> > > > > > >>> > > > Filesystem Size Used Avail Use% > Mounted > > on > > >>> > > > > > >>> > > > /dev/mapper/VolGroup01-LogVol00 > > >>> > > > > > >>> > > > > 223G > > 29G 182G 14% > > >>> / > > >>> > > > > > >>> > > > /dev/sda1 99M 81M 13M 87% /boot > > >>> > > > > > >>> > > > tmpfs 757M 0 757M 0% /dev/shm > > >>> > > > > > >>> > > > [root@localhost kishore]# cat > /etc/fstab > > >>> > > > > > >>> > > > /dev/VolGroup01/LogVol00 / ext3 > defaults > > 1 1 > > >>> > > > > > >>> > > > LABEL=/boot /boot ext3 defaults 1 > 2 > > >>> > > > > > >>> > > > tmpfs /dev/shm tmpfs defaults 0 0 > > >>> > > > > > >>> > > > devpts /dev/pts devpts > gid=5,mode=620 0 > > 0 > > >>> > > > > > >>> > > > sysfs /sys sysfs defaults 0 0 > > >>> > > > > > >>> > > > proc /proc proc defaults 0 0 > > >>> > > > > > >>> > > > /dev/VolGroup01/LogVol01 swap > swap > > defaults 0 0 > > >>> > > > > > >>> > > > [root@localhost kishore]# > > >>> > > > > > >>> > > > On Tue, Mar 16, 2010 at 4:18 PM, > Pasi > > Kärkkäinen > > >>> > > <[1][2][3][4][5][7]pasik@iki.fi> > wrote: > > >>> > > > > > >>> > > > On Tue, Mar 16, 2010 at > 03:40:46PM > > -0700, kishore > > >>> kumar > > >>> > wrote: > > >>> > > > > I am not sure. Can you > please > > let me know how > > >>> to > > >>> > check > > >>> > > this? any > > >>> > > > command > > >>> > > > > ?? > > >>> > > > > > >>> > > > well simple "df -h" will show > it. and > > also "cat > > >>> > /etc/fstab". > > >>> > > > You can also check it from your > grub > > >>> configuration.. from > > >>> > the > > >>> > > working > > >>> > > > baremetal (non-Xen) entry. > > >>> > > > > > >>> > > > -- Pasi > > >>> > > > > > > >>> > > > > On Tue, Mar 16, 2010 at > 3:29 PM, > > Pasi > > >>> Kärkkäinen > > >>> > > > > <[1][2][3][4][5][6][8]pasik@iki.fi> > > wrote: > > >>> > > > > > > >>> > > > > On Tue, Mar 16, 2010 at > > 03:22:50PM -0700, > > >>> kishore > > >>> > kumar > > >>> > > wrote: > > >>> > > > > > attached is the > log > > captured in with > > >>> the word > > >>> > > document . > > >>> > > > > > > > >>> > > > > > > >>> > > > > Scanning logical > volumes > > >>> > > > > Reading all physical > volumes. > > This may > > >>> take a > > >>> > while... > > >>> > > > > Activating logical > volumes > > >>> > > > > Volume group > "VolGroup01" not > > found > > >>> > > > > Trying to resume from > > >>> /dev/VolGroup01/LogVol01 > > >>> > > > > Unable to access resume > device > > >>> > (/dev/VolGroup01/LogVol01) > > >>> > > > > Creating root device. > > >>> > > > > Mounting root > filesystem. > > >>> > > > > mount: could not find > > filesystem '/dev/root' > > >>> > > > > Setting up other > filesystems. > > >>> > > > > Setting up new root fs > > >>> > > > > setuproot: moving /dev > failed: > > No such file > > >>> or > > >>> > directory > > >>> > > > > no fstab.sys, mounting > > internal defaults > > >>> > > > > setuproot: error > mounting > > /proc: No such > > >>> file or > > >>> > directory > > >>> > > > > setuproot: error > mounting > > /sys: No such file > > >>> or > > >>> > directory > > >>> > > > > Switching to new root > and > > running init. > > >>> > > > > unmounting old /dev > > >>> > > > > unmounting old /proc > > >>> > > > > unmounting old /sys > > >>> > > > > switchroot: mount > failed: No > > such file or > > >>> directory > > >>> > > > > init used greatest > stack > > depth: 4088 bytes > > >>> left > > >>> > > > > Kernel panic - not > syncing: > > Attempted to > > >>> kill init! > > >>> > > > > > > >>> > > > > So it seems it gets all > the > > way to executing > > >>> the > > >>> > initrd > > >>> > > image, > > >>> > > > > which then fails to > mount the > > root fs. > > >>> > > > > > > >>> > > > > Earlier in the log: > > >>> > > > > ata1: SATA link up 3.0 > Gbps > > (SStatus 123 > > >>> SControl > > >>> > 300) > > >>> > > > > ata1.00: ATA-8: Hitachi > > HDT721025SLA380, > > >>> STBOA3AA, > > >>> > max > > >>> > > UDMA/133 > > >>> > > > > ata1.00: 488397168 > sectors, > > multi 0: LBA48 > > >>> NCQ > > >>> > (depth > > >>> > > 31/32), AA > > >>> > > > > ata1.00: configured for > > UDMA/133 > > >>> > > > > scsi 0:0:0:0: > Direct-Access > > ATA > > >>> Hitachi > > >>> > HDT72102 > > >>> > > STBO > > >>> > > > PQ: 0 > > >>> > > > > ANSI: 5 > > >>> > > > > sd 0:0:0:0: Attached > scsi > > generic sg0 type 0 > > >>> > > > > sd 0:0:0:0: [sda] > 488397168 > > 512-byte logical > > >>> > blocks: (250 > > >>> > > GB/232 > > >>> > > > GiB) > > >>> > > > > sd 0:0:0:0: [sda] Write > > Protect is off > > >>> > > > > sd 0:0:0:0: [sda] Mode > Sense: > > 00 3a 00 00 > > >>> > > > > sd 0:0:0:0: [sda] Write > cache: > > enabled, read > > >>> cache: > > >>> > > enabled, > > >>> > > > doesn't > > >>> > > > > support DPO or FUA > > >>> > > > > sda: sda1 sda2 > > >>> > > > > sd 0:0:0:0: [sda] > Attached > > SCSI disk > > >>> > > > > > > >>> > > > > so /dev/sda was > detected. Is > > your root lvm > > >>> volume > > >>> > on > > >>> > > /dev/sda ? > > >>> > > > > Is > /dev/VolGroup01/LogVol01 > > really your root > > >>> fs? > > >>> > > > > > > >>> > > > > -- Pasi > > >>> > > > > > > >>> > > > > > > > >>> > > > > > > > >>> > > > > > On Tue, Mar 16, > 2010 at > > 3:03 PM, Pasi > > >>> > Kärkkäinen > > >>> > > > > > > <[1][2][3][4][5][6][7][9]pasik@iki.fi> wrote: > > >>> > > > > > > > >>> > > > > > On Tue, Mar 16, > 2010 > > at 02:56:06PM > > >>> -0700, > > >>> > kishore > > >>> > > kumar > > >>> > > > wrote: > > >>> > > > > > > Please > find the > > attached log > > >>> file after > > >>> > fixing > > >>> > > the > > >>> > > > dom 0 > > >>> > > > > kernel cmd > > >>> > > > > > line > > >>> > > > > > > as below > > >>> > > > > > > > > >>> > > > > > > ro > > root=/dev/VolGroup01/LogVol00 > > >>> > console=hvc0 > > >>> > > > > earlyprintk=xen > > >>> > > > > > nomodeset > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > There's > something > > wrong with the log, > > >>> the > > >>> > dom0 > > >>> > > kernel > > >>> > > > parts are > > >>> > > > > all on > > >>> > > > > > one line.. > > >>> > > > > > It's really > difficult > > to read it. > > >>> > > > > > > > >>> > > > > > -- Pasi > > >>> > > > > > > > >>> > > > > > > Thanks > > >>> > > > > > > > > >>> > > > > > > > > >>> > > > > > > On Tue, > Mar 16, > > 2010 at 2:29 PM, > > >>> Pasi > > >>> > > Kärkkäinen > > >>> > > > > > > > <[1][2][3][4][5][6][7][8][10]pasik@iki.fi> > > >>> wrote: > > >>> > > > > > > > > >>> > > > > > > On Tue, > Mar > > 16, 2010 at > > >>> 02:16:22PM > > >>> > -0700, > > >>> > > kishore > > >>> > > > kumar > > >>> > > > > wrote: > > >>> > > > > > > > I > did > > below steps. > > >>> > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > > > I > > pulled DOM 0 kernel > > >>> from > > >>> > > > > > > > > git > > clone > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > > git://[1][2][3][4][5][6][7][8][9][11]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > > > > > > > > linux-2.6-xen > > >>> > > > > > > > > > >>> > > > > > > > > cd > > linux-2.6-xen > > >>> > > > > > > > > > >>> > > > > > > > > make > > clean > > >>> > > > > > > > > > >>> > > > > > > > > cp -a > > .config .config-old > > >>> > > > > > > > > > >>> > > > > > > > > wget -O > > .config > > >>> > > > > > > > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > > [2][3][4][5][6][7][8][9][10][12]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > > > > > > > > >>> > > > > > > > > make > > oldconfig > > >>> > > > > > > > > > >>> > > > > > > > > make > > bzImage > > >>> > > > > > > > > > >>> > > > > > > > > make > > modules > > >>> > > > > > > > > > >>> > > > > > > > > make > > modules_install > > >>> > > > > > > > > > >>> > > > > > > > > cp -a > > .config > > >>> > /boot/config-2.6.32.9 > > >>> > > > > > > > > > >>> > > > > > > > > cp -a > > System.map > > >>> > > /boot/System.map-2.6.32.9 > > >>> > > > > > > > > > >>> > > > > > > > > cp -a > > >>> arch/x86/boot/bzImage > > >>> > > > /boot/vmlinuz-2.6.32.9 > > >>> > > > > > > > > > >>> > > > > > > > > and > > modified the > > >>> grub.conf as > > >>> > below > > >>> > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > > > > Root(hd0,0) > > >>> > > > > > > > > > >>> > > > > > > > > kernel > > /xen.gz > > >>> console=vga,com1 > > >>> > > > com1=115200,8n1 > > >>> > > > > msi=1 > > >>> > > > > > iommu=1 > > >>> > > > > > > > > > >>> > > > > > > > > module > > /vmlinuz-2.6.32.9 > > >>> ro > > >>> > > > > > root=/dev/VolGroup01/LogVo100 > > >>> > > > > > rhgb > > >>> > > > > > > quiet > > >>> > > > > > > > > > >>> > > > > > > > > module > > >>> /initrd-2.6.32.9.img > > >>> > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > > > and > > rebooted the machine. > > >>> Then > > >>> > It > > >>> > > booted with > > >>> > > > some > > >>> > > > > xen > > >>> > > > > > messages > > >>> > > > > > > and > > >>> > > > > > > > > stopped. > > Those were the > > >>> > messages > > >>> > > captured > > >>> > > > from > > >>> > > > > serial > > >>> > > > > > console. > > >>> > > > > > > > > > >>> > > > > > > > > Please > > let me know if I > > >>> did > > >>> > something > > >>> > > wrong > > >>> > > > here. > > >>> > > > > > > > > > >>> > > > > > > > > >>> > > > > > > Please > fix the > > kernel cmdline > > >>> based > > >>> > on my > > >>> > > earlier > > >>> > > > email, > > >>> > > > > and > > >>> > > > > > capture and > > >>> > > > > > > post > the > > >>> > > > > > > serial > console > > log again! > > >>> > > > > > > > > >>> > > > > > > -- Pasi > > >>> > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > > > On Tue, > > Mar 16, 2010 at > > >>> 1:20 PM, > > >>> > Pasi > > >>> > > > Kärkkäinen > > >>> > > > > > > > > >>> <[3][4][5][6][7][8][9][10][11][13]pasik@iki.fi> > > >>> > wrote: > > >>> > > > > > > > > > >>> > > > > > > > > On > > Tue, Mar 16, 2010 at > > >>> > 01:16:28PM > > >>> > > -0700, > > >>> > > > Jeremy > > >>> > > > > > Fitzhardinge > > >>> > > > > > > wrote: > > >>> > > > > > > > > > On > > 03/16/2010 12:48 > > >>> PM, Pasi > > >>> > > Kärkkäinen > > >>> > > > wrote: > > >>> > > > > > > > > >> On > > Tue, Mar 16, 2010 > > >>> at > > >>> > 09:43:44PM > > >>> > > +0200, > > >>> > > > Pasi > > >>> > > > > > Kärkkäinen > > >>> > > > > > > wrote: > > >>> > > > > > > > > >> > > >>> > > > > > > > > >>> > > On Tue, Mar 16, > > >>> 2010 at > > >>> > > 10:32:17AM > > >>> > > > -0700, > > >>> > > > > kishore > > >>> > > > > > kumar > > >>> > > > > > > wrote: > > >>> > > > > > > > > >>> > > >>> > > > > > > > > >>>> > > Attached is > > >>> the > > >>> > output > > >>> > > captured > > >>> > > > from > > >>> > > > > serial > > >>> > > > > > console. > > >>> > > > > > > > > >>>> > > >>> > > > > > > > > >>>> > > Machine does > > >>> not boot > > >>> > after > > >>> > > > compiling xen > > >>> > > > > 3.4.3 > > >>> > > > > > with > > >>> > > > > > > pv_ops > dom > > >>> > > > > > > > > 0 > > kernel. > > >>> > > > > > > > > >>>> > > >>> > > > > > > > > >>>> > > Please let me > > >>> know > > >>> > what is > > >>> > > going > > >>> > > > wrong > > >>> > > > > here. > > >>> > > > > > > > > >>>> > > >>> > > > > > > > > >>>> > > >>> > > > > > > > > >>> > > Ok this looks like > > >>> a bug > > >>> > that is > > >>> > > already > > >>> > > > being > > >>> > > > > sorted > > >>> > > > > > out on > > >>> > > > > > > > > > xen-devel mailinglist. > > >>> > > > > > > > > >>> I > > added CC to > > >>> xen-devel. > > >>> > > > > > > > > >>> > > >>> > > > > > > > > >>> > > >>> > > > > > > > > >> > > >>> > > > > > > > > > > > >>> > > > > > > > > > > > Those messages are > > >>> not a > > >>> > problem in > > >>> > > > themselves, > > >>> > > > > but the > > >>> > > > > > related > > >>> > > > > > > > > > problem > > >>> > > > > > > > > > is > > believed to be > > >>> fixed in > > >>> > current > > >>> > > > > xen/stable-2.6.32.x. > > >>> > > > > > It > > >>> > > > > > > looks > like > > >>> > > > > > > > > > the > > output stops > > >>> there > > >>> > because the > > >>> > > Xen > > >>> > > > console > > >>> > > > > isn't set > > >>> > > > > > up > > >>> > > > > > > > properly > > >>> > > > > > > > > for > > >>> > > > > > > > > > > > some reason. > > >>> > > > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > > > Yeah, > > remove "rhgb > > >>> quiet" from > > >>> > the > > >>> > > options.. > > >>> > > > the > > >>> > > > > dom0 > > >>> > > > > > kernel > > >>> > > > > > > cmdline > > >>> > > > > > > > > should > > be like this: > > >>> > > > > > > > > ro > > >>> > root=/dev/VolGroup01/LogVol00 > > >>> > > > console=hvc0 > > >>> > > > > > earlyprintk=xen > > >>> > > > > > > > nomodeset > > >>> > > > > > > > > -- > > Pasi > > >>> > > > > > > > > > >>> > > > > > > > > References > > >>> > > > > > > > > > >>> > > > > > > > > Visible > > links > > >>> > > > > > > > > 1. > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > > [5][6][7][8][9][10][11][12][14]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > > > > > > > 2. > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > > [6][7][8][9][10][11][12][13][15]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > > > > > > > 3. > > >>> > > mailto:[7][8][9][10][11][12][13][14][16]pasik@iki.fi > > >>> > > > > > > > > >>> > > > > > > References > > >>> > > > > > > > > >>> > > > > > > Visible > links > > >>> > > > > > > 1. > > >>> > > mailto:[9][10][11][12][13][14][15][17]pasik@iki.fi > > >>> > > > > > > 2. > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > > [10][11][12][13][14][15][16][18]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > > > > > 3. > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > > [11][12][13][14][15][16][17][19]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > > > > > 4. > > >>> > > mailto:[12][13][14][15][16][17][18][20]pasik@iki.fi > > >>> > > > > > > 5. > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > > [13][14][15][16][17][18][19][21]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > > > > > 6. > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > > [14][15][16][17][18][19][20][22]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > > > > > 7. > > >>> > > mailto:[15][16][17][18][19][20][21][23]pasik@iki.fi > > >>> > > > > > > Asserting > Post > > complete GPIO!!! > > >>> > > > > > > Transfer > control to > > CSM 16-bit > > >>> binary for > > >>> > legacy > > >>> > > boot > > >>> > > > > > > __ __ > > _____ _ _ > > >>> _____ > > >>> > > _ _ > > >>> > > > > > > \ \/ /___ _ > __ > > |___ /| || | > > >>> |___ / > > >>> > _ __ > > >>> > > ___| || | > > >>> > > > _ > > >>> > > > > __ _ > > >>> > > > > > __ ___ > > >>> > > > > > > \ // _ \ > '_ \ > > |_ \| || |_ > > >>> |_ \ __| > > >>> > '__/ > > >>> > > __| || > > >>> > > > |_ __| > > >>> > > > > '_ \| > > >>> > > > > > '__/ _ \ > > >>> > > > > > > / \ __/ > | | | > > ___) |__ _| > > >>> ___) |__| > > >>> > | | > > >>> > > (__|__ > > >>> > > > _|__| > > >>> > > > > |_) | | > > >>> > > > > > | __/ > > >>> > > > > > > > /_/\_\___|_| |_| > > |____(_) > > >>> |_|(_)____/ > > >>> > |_| > > >>> > > \___| |_| > > >>> > > > | > > >>> > > > > .__/|_| > > >>> > > > > > \___| > > >>> > > > > > > > > >>> > > > |_| > > >>> > > > > > > (XEN) Xen > version > > 3.4.3-rc4-pre > > >>> > > (kishore@localdomain) > > >>> > > > (gcc > > >>> > > > > version > > >>> > > > > > 4.1.2 20080704 > (Red > > Hat 4.1.2-46)) > > >>> Mon Mar > > >>> > 15 > > >>> > > 13:44:31 PDT > > >>> > > > 2010 > > >>> > > > > > > (XEN) Latest > > ChangeSet: Tue Mar 09 > > >>> > 18:15:52 2010 > > >>> > > +0000 > > >>> > > > > > > 19924:6e72f8c3c017 > > >>> > > > > > > (XEN) > Command line: > > >>> console=vga,com1 > > >>> > > com1=115200,8n1 > > >>> > > > msi=1 > > >>> > > > > iommu=1 > > >>> > > > > > > (XEN) Video > > information: > > >>> > > > > > > (XEN) VGA > is text > > mode 80x25, font > > >>> 8x16 > > >>> > > > > > > (XEN) > VBE/DDC > > methods: none; EDID > > >>> > transfer time: > > >>> > > 0 > > >>> > > > seconds > > >>> > > > > > > (XEN) EDID > info > > not retrieved > > >>> because no > > >>> > DDC > > >>> > > retrieval > > >>> > > > method > > >>> > > > > > detected > > >>> > > > > > > (XEN) Disc > > information: > > >>> > > > > > > (XEN) Found > 1 MBR > > signatures > > >>> > > > > > > (XEN) Found > 1 EDD > > information > > >>> structures > > >>> > > > > > > (XEN) > Xen-e820 RAM > > map: > > >>> > > > > > > (XEN) > > 0000000000000000 - > > >>> 000000000009d000 > > >>> > > (usable) > > >>> > > > > > > (XEN) > > 000000000009d000 - > > >>> 00000000000a0000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 00000000000e0000 - > > >>> 0000000000100000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 0000000000100000 - > > >>> 000000006d597000 > > >>> > > (usable) > > >>> > > > > > > (XEN) > > 000000006d597000 - > > >>> 000000006d686000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 000000006d686000 - > > >>> 000000006f598000 > > >>> > > (usable) > > >>> > > > > > > (XEN) > > 000000006f598000 - > > >>> 000000006f59a000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 000000006f59a000 - > > >>> 000000006f5af000 > > >>> > (ACPI > > >>> > > NVS) > > >>> > > > > > > (XEN) > > 000000006f5af000 - > > >>> 000000006f5d9000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 000000006f5d9000 - > > >>> 000000006f5f9000 > > >>> > (ACPI > > >>> > > data) > > >>> > > > > > > (XEN) > > 000000006f5f9000 - > > >>> 000000006f6df000 > > >>> > (ACPI > > >>> > > NVS) > > >>> > > > > > > (XEN) > > 000000006f6df000 - > > >>> 000000006f700000 > > >>> > (ACPI > > >>> > > data) > > >>> > > > > > > (XEN) > > 000000006f700000 - > > >>> 0000000080000000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 00000000a0000000 - > > >>> 00000000b0000000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 00000000fc000000 - > > >>> 00000000fd000000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 00000000fed1c000 - > > >>> 00000000fed20000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 00000000ffc00000 - > > >>> 0000000100000000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) System > RAM: > > 1780MB > > >>> (1823000kB) > > >>> > > > > > > (XEN) ACPI: > RSDP > > 000F03F0, 0024 (r2 > > >>> INTEL > > >>> > ) > > >>> > > > > > > (XEN) ACPI: > XSDT > > 6F6FE120, 0064 (r1 > > >>> INTEL > > >>> > THRLY > > >>> > > > 0 > > >>> > > > > > 1000013) > > >>> > > > > > > (XEN) ACPI: > FACP > > 6F6FD000, 00F4 (r4 > > >>> INTEL > > >>> > THRLY > > >>> > > > 0 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > DSDT > > 6F6F5000, 74F1 (r2 > > >>> INTEL > > >>> > THRLY > > >>> > > > 3 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > FACS > > 6F5F9000, 0040 > > >>> > > > > > > (XEN) ACPI: > APIC > > 6F6F4000, 01CC (r2 > > >>> INTEL > > >>> > THRLY > > >>> > > > 0 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > MCFG > > 6F6F3000, 003C (r1 > > >>> INTEL > > >>> > THRLY > > >>> > > > 1 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > HPET > > 6F6F2000, 0038 (r1 > > >>> INTEL > > >>> > THRLY > > >>> > > > 1 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > SLIT > > 6F6F1000, 0030 (r1 > > >>> INTEL > > >>> > THRLY > > >>> > > > 1 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > WDDT > > 6F6F0000, 0040 (r1 > > >>> INTEL > > >>> > THRLY > > >>> > > > 0 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > SSDT > > 6F5D9000, 1FDDC > > >>> (r1 > > >>> > INTEL SSDT > > >>> > > PM > > >>> > > > 4000 > > >>> > > > > INTL > > >>> > > > > > 20061109) > > >>> > > > > > > (XEN) ACPI: > DMAR > > 6F6EE000, 01D0 (r1 > > >>> INTEL > > >>> > THRLY > > >>> > > > 1 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) Domain > heap > > initialised > > >>> > > > > > > (XEN) > Processor #0 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #2 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #4 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #16 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #18 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #20 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #1 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #3 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #5 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #17 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #19 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #21 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > IOAPIC[0]: > > apic_id 8, version > > >>> 32, > > >>> > address > > >>> > > > 0xfec00000, GSI > > >>> > > > > 0-23 > > >>> > > > > > > (XEN) > IOAPIC[1]: > > apic_id 9, version > > >>> 32, > > >>> > address > > >>> > > > 0xfec90000, GSI > > >>> > > > > 24-47 > > >>> > > > > > > (XEN) > Enabling APIC > > mode: Phys. > > >>> Using 2 > > >>> > I/O > > >>> > > APICs > > >>> > > > > > > (XEN) Intel > VT-d > > DMAR tables have > > >>> been > > >>> > parsed. > > >>> > > > > > > (XEN) Using > > scheduler: SMP Credit > > >>> > Scheduler > > >>> > > (credit) > > >>> > > > > > > (XEN) > Detected > > 3200.207 MHz > > >>> processor. > > >>> > > > > > > (XEN) VMX: > > Supported advanced > > >>> features: > > >>> > > > > > > (XEN) - > APIC MMIO > > access > > >>> virtualisation > > >>> > > > > > > (XEN) - > APIC TPR > > shadow > > >>> > > > > > > (XEN) - > Extended > > Page Tables (EPT) > > >>> > > > > > > (XEN) - > > Virtual-Processor > > >>> Identifiers > > >>> > (VPID) > > >>> > > > > > > (XEN) - > Virtual > > NMI > > >>> > > > > > > (XEN) - MSR > > direct-access bitmap > > >>> > > > > > > (XEN) VMX: > EPT is > > available. > > >>> > > > > > > (XEN) VMX: > VPID is > > available. > > >>> > > > > > > (XEN) HVM: > VMX > > enabled > > >>> > > > > > > (XEN) HVM: > Hardware > > Assisted Paging > > >>> > detected. > > >>> > > > > > > (XEN) CPU0: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 1/2 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU1: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 2/4 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU2: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 3/16 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU3: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 4/18 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU4: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 5/20 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU5: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 6/1 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU6: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 7/3 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU7: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 8/5 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU8: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 9/17 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU9: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 10/19 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU10: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 11/21 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU11: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) Total > of 12 > > processors > > >>> activated. > > >>> > > > > > > (XEN) > ENABLING > > IO-APIC IRQs > > >>> > > > > > > (XEN) -> > Using > > new ACK method > > >>> > > > > > > (XEN) > checking TSC > > synchronization > > >>> across > > >>> > 12 > > >>> > > CPUs: > > >>> > > > passed. > > >>> > > > > > > (XEN) > Platform > > timer is 14.318MHz > > >>> HPET > > >>> > > > > > > ?(XEN) > Brought up > > 12 CPUs > > >>> > > > > > > (XEN) Intel > VT-d > > Snoop Control > > >>> supported. > > >>> > > > > > > (XEN) Intel > VT-d > > DMA Passthrough > > >>> not > > >>> > supported. > > >>> > > > > > > (XEN) Intel > VT-d > > Queued > > >>> Invalidation > > >>> > supported. > > >>> > > > > > > (XEN) Intel > VT-d > > Interrupt > > >>> Remapping > > >>> > supported. > > >>> > > > > > > (XEN) I/O > > virtualisation enabled > > >>> > > > > > > (XEN) I/O > > virtualisation for PV > > >>> guests > > >>> > disabled > > >>> > > > > > > (XEN) > xenoprof: > > Initialization > > >>> failed. > > >>> > Intel > > >>> > > processor > > >>> > > > model 44 > > >>> > > > > for P6 > > >>> > > > > > class family is > not > > supported > > >>> > > > > > > (XEN) *** > LOADING > > DOMAIN 0 *** > > >>> > > > > > > (XEN) Xen > kernel: > > 64-bit, lsb, > > >>> compat32 > > >>> > > > > > > (XEN) Dom0 > kernel: > > 64-bit, PAE, > > >>> lsb, > > >>> > paddr > > >>> > > 0x1000000 -> > > >>> > > > > 0x26bb000 > > >>> > > > > > > (XEN) > PHYSICAL > > MEMORY ARRANGEMENT: > > >>> > > > > > > (XEN) Dom0 > alloc.: > > >>> > > 0000000064000000->0000000068000000 > > >>> > > > > (404490 pages > > >>> > > > > > to be > allocated) > > >>> > > > > > > (XEN) > VIRTUAL > > MEMORY ARRANGEMENT: > > >>> > > > > > > (XEN) > Loaded > > kernel: > > >>> > > ffffffff81000000->ffffffff826bb000 > > >>> > > > > > > (XEN) Init. > > ramdisk: > > >>> > > ffffffff826bb000->ffffffff82d0d800 > > >>> > > > > > > (XEN) > Phys-Mach > > map: > > >>> > > ffffffff82d0e000->ffffffff83044050 > > >>> > > > > > > (XEN) Start > info: > > >>> > > ffffffff83045000->ffffffff830454b4 > > >>> > > > > > > (XEN) Page > tables: > > >>> > > ffffffff83046000->ffffffff83063000 > > >>> > > > > > > (XEN) Boot > stack: > > >>> > > ffffffff83063000->ffffffff83064000 > > >>> > > > > > > (XEN) > TOTAL: > > >>> > > ffffffff80000000->ffffffff83400000 > > >>> > > > > > > (XEN) ENTRY > > ADDRESS: > > >>> ffffffff819c1200 > > >>> > > > > > > (XEN) Dom0 > has > > maximum 12 VCPUs > > >>> > > > > > > (XEN) > Scrubbing > > Free RAM: .done. > > >>> > > > > > > (XEN) Xen > trace > > buffers: disabled > > >>> > > > > > > (XEN) Std. > > Loglevel: Errors and > > >>> warnings > > >>> > > > > > > (XEN) Guest > > Loglevel: Nothing > > >>> > (Rate-limited: > > >>> > > Errors and > > >>> > > > > warnings) > > >>> > > > > > > (XEN) Xen is > > relinquishing VGA > > >>> console. > > >>> > > > > > > (XEN) *** > Serial > > input -> DOM0 > > >>> (type > > >>> > 'CTRL-a' > > >>> > > three > > >>> > > > times to > > >>> > > > > switch > > >>> > > > > > input to Xen) > > >>> > > > > > > (XEN) Freed > 128kB > > init memory. > > >>> > > > > > > mapping > kernel into > > physical memory > > >>> > > > > > > Xen: setup > ISA > > identity maps > > >>> > > > > > > about to get > > started... > > >>> > > > > > > Initializing > cgroup > > subsys cpuset > > >>> > > > > > > Initializing > cgroup > > subsys cpu > > >>> > > > > > > Linux > version > > 2.6.32.9 > > >>> > > (kishore@localhost.localdomain) > > >>> > > > (gcc > > >>> > > > > version > > >>> > > > > > 4.1.2 20080704 > (Red > > Hat 4.1.2-46)) #1 > > >>> SMP > > >>> > Mon Mar > > >>> > > 15 > > >>> > > > 15:16:28 PDT > > >>> > > > > 2010 > > >>> > > > > > > Command > line: ro > > >>> > root=/dev/VolGroup01/LogVol00 > > >>> > > > console=hvc0 > > >>> > > > > > earlyprintk=xen > > nomodeset > > >>> > > > > > > KERNEL > supported > > cpus: > > >>> > > > > > > Intel > > GenuineIntel > > >>> > > > > > > AMD > AuthenticAMD > > >>> > > > > > > Centaur > > CentaurHauls > > >>> > > > > > > > BIOS-provided > > physical RAM map: > > >>> > > > > > > Xen: > > 0000000000000000 - > > >>> 000000000009d000 > > >>> > > (usable) > > >>> > > > > > > Xen: > > 000000000009d000 - > > >>> 0000000000100000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 0000000000100000 - > > >>> 0000000066c0a000 > > >>> > > (usable) > > >>> > > > > > > Xen: > > 000000006d597000 - > > >>> 000000006d686000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 000000006f598000 - > > >>> 000000006f59a000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 000000006f59a000 - > > >>> 000000006f5af000 > > >>> > (ACPI > > >>> > > NVS) > > >>> > > > > > > Xen: > > 000000006f5af000 - > > >>> 000000006f5d9000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 000000006f5d9000 - > > >>> 000000006f5f9000 > > >>> > (ACPI > > >>> > > data) > > >>> > > > > > > Xen: > > 000000006f5f9000 - > > >>> 000000006f6df000 > > >>> > (ACPI > > >>> > > NVS) > > >>> > > > > > > Xen: > > 000000006f6df000 - > > >>> 000000006f700000 > > >>> > (ACPI > > >>> > > data) > > >>> > > > > > > Xen: > > 000000006f700000 - > > >>> 0000000080000000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 00000000a0000000 - > > >>> 00000000b0000000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 00000000fc000000 - > > >>> 00000000fd000000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 00000000fed1c000 - > > >>> 00000000fed20000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 00000000ffc00000 - > > >>> 0000000100000000 > > >>> > > (reserved) > > >>> > > > > > > bootconsole > > [xenboot0] enabled > > >>> > > > > > > DMI 2.4 > present. > > >>> > > > > > > last_pfn = > 0x66c0a > > max_arch_pfn = > > >>> > 0x400000000 > > >>> > > > > > > > > init_memory_mapping: > > >>> > > 0000000000000000-0000000066c0a000 > > >>> > > > > > > RAMDISK: > 026bb000 - > > 02d0d800 > > >>> > > > > > > ACPI: RSDP > > 00000000000f03f0 00024 > > >>> (v02 > > >>> > INTEL ) > > >>> > > > > > > ACPI: XSDT > > 000000006f6fe120 00064 > > >>> (v01 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000000 > > >>> > > > > > 01000013) > > >>> > > > > > > ACPI: FACP > > 000000006f6fd000 000F4 > > >>> (v04 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000000 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: DSDT > > 000000006f6f5000 074F1 > > >>> (v02 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000003 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: FACS > > 000000006f5f9000 00040 > > >>> > > > > > > ACPI: APIC > > 000000006f6f4000 001CC > > >>> (v02 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000000 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: MCFG > > 000000006f6f3000 0003C > > >>> (v01 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000001 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: HPET > > 000000006f6f2000 00038 > > >>> (v01 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000001 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: SLIT > > 000000006f6f1000 00030 > > >>> (v01 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000001 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: WDDT > > 000000006f6f0000 00040 > > >>> (v01 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000000 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: SSDT > > 000000006f5d9000 1FDDC > > >>> (v01 > > >>> > INTEL > > >>> > > SSDT PM > > >>> > > > 00004000 > > >>> > > > > INTL > > >>> > > > > > 20061109) > > >>> > > > > > > ACPI: > > 000000006f6ee000 001D0 > > >>> (v01 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000001 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > No NUMA > > configuration found > > >>> > > > > > > Faking a > node at > > >>> > > 0000000000000000-0000000066c0a000 > > >>> > > > > > > Bootmem > setup node > > 0 > > >>> > > 0000000000000000-0000000066c0a000 > > >>> > > > > > > NODE_DATA > > [0000000000008000 - > > >>> > 000000000001ffff] > > >>> > > > > > > bootmap > > [0000000000020000 - > > >>> > 000000000002cd87] > > >>> > > pages d > > >>> > > > > > > (9 early > > reservations) ==> bootmem > > >>> > [0000000000 - > > >>> > > > 0066c0a000] > > >>> > > > > > > #0 > [0000000000 - > > 0000001000] > > >>> BIOS data > > >>> > page > > >>> > > ==> > > >>> > > > [0000000000 > > >>> > > > > - > > >>> > > > > > 0000001000] > > >>> > > > > > > #1 > [0003046000 - > > 0003063000] > > >>> XEN > > >>> > PAGETABLES > > >>> > > ==> > > >>> > > > [0003046000 > > >>> > > > > - > > >>> > > > > > 0003063000] > > >>> > > > > > > #2 > [0000006000 - > > 0000008000] > > >>> > TRAMPOLINE > > >>> > > ==> > > >>> > > > [0000006000 > > >>> > > > > - > > >>> > > > > > 0000008000] > > >>> > > > > > > #3 > [0001000000 - > > 000269ae98] > > >>> TEXT > > >>> > DATA BSS > > >>> > > ==> > > >>> > > > [0001000000 > > >>> > > > > - > > >>> > > > > > 000269ae98] > > >>> > > > > > > #4 > [00026bb000 - > > 0002d0d800] > > >>> > RAMDISK > > >>> > > ==> > > >>> > > > [00026bb000 > > >>> > > > > - > > >>> > > > > > 0002d0d800] > > >>> > > > > > > #5 > [0002d0e000 - > > 0003046000] > > >>> XEN START > > >>> > INFO > > >>> > > ==> > > >>> > > > [0002d0e000 > > >>> > > > > - > > >>> > > > > > 0003046000] > > >>> > > > > > > #6 > [000269b000 - > > 000269b011] > > >>> > BRK > > >>> > > ==> > > >>> > > > [000269b000 > > >>> > > > > - > > >>> > > > > > 000269b011] > > >>> > > > > > > #7 > [0000100000 - > > 000041a000] > > >>> > PGTABLE > > >>> > > ==> > > >>> > > > [0000100000 > > >>> > > > > - > > >>> > > > > > 000041a000] > > >>> > > > > > > #8 > [0000001000 - > > 0000001030] > > >>> ACPI > > >>> > SLIT > > >>> > > ==> > > >>> > > > [0000001000 > > >>> > > > > - > > >>> > > > > > 0000001030] > > >>> > > > > > > found SMP > MP-table > > at > > >>> [ffff8800000fd750] > > >>> > fd750 > > >>> > > > > > > Zone PFN > ranges: > > >>> > > > > > > DMA > > 0x00000000 -> 0x00001000 > > >>> > > > > > > DMA32 > > 0x00001000 -> 0x00100000 > > >>> > > > > > > Normal > > 0x00100000 -> 0x00100000 > > >>> > > > > > > Movable zone > start > > PFN for each > > >>> node > > >>> > > > > > > > early_node_map[2] > > active PFN ranges > > >>> > > > > > > 0: > 0x00000000 > > -> 0x0000009d > > >>> > > > > > > 0: > 0x00000100 > > -> 0x00066c0a > > >>> > > > > > > ACPI: > PM-Timer IO > > Port: 0x408 > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x00] > > >>> lapic_id[0x00] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x01] > > >>> lapic_id[0x02] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x02] > > >>> lapic_id[0x04] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x03] > > >>> lapic_id[0x10] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x04] > > >>> lapic_id[0x12] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x05] > > >>> lapic_id[0x14] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x06] > > >>> lapic_id[0x01] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x07] > > >>> lapic_id[0x03] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x08] > > >>> lapic_id[0x05] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x09] > > >>> lapic_id[0x11] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x0a] > > >>> lapic_id[0x13] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x0b] > > >>> lapic_id[0x15] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x0c] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x0d] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x0e] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x0f] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x10] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x11] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x12] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x13] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x14] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x15] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x16] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x17] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x00] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x01] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x02] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x03] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x04] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x05] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x06] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x07] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x08] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x09] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x0a] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x0b] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x0c] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x0d] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x0e] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x0f] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x10] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x11] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x12] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x13] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x14] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x15] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x16] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x17] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: IOAPIC > > (id[0x08] > > >>> address[0xfec00000] > > >>> > > gsi_base[0]) > > >>> > > > > > > IOAPIC[0]: > apic_id > > 8, version 0, > > >>> address > > >>> > > 0xfec00000, GSI > > >>> > > > 0-0 > > >>> > > > > > > ACPI: IOAPIC > > (id[0x09] > > >>> address[0xfec90000] > > >>> > > gsi_base[24]) > > >>> > > > > > > IOAPIC[1]: > apic_id > > 9, version 0, > > >>> address > > >>> > > 0xfec90000, GSI > > >>> > > > 24-24 > > >>> > > > > > > ACPI: > INT_SRC_OVR > > (bus 0 bus_irq 0 > > >>> > global_irq 2 > > >>> > > dfl dfl) > > >>> > > > > > > ERROR: > Unable to > > locate IOAPIC for > > >>> GSI 2 > > >>> > > > > > > ACPI: > INT_SRC_OVR > > (bus 0 bus_irq 9 > > >>> > global_irq 9 > > >>> > > high > > >>> > > > level) > > >>> > > > > > > ERROR: > Unable to > > locate IOAPIC for > > >>> GSI 9 > > >>> > > > > > > Using ACPI > (MADT) > > for SMP > > >>> configuration > > >>> > > information > > >>> > > > > > > ACPI: HPET > id: > > 0x8086a401 base: > > >>> 0xfed00000 > > >>> > > > > > > SMP: > Allowing 12 > > CPUs, 0 hotplug > > >>> CPUs > > >>> > > > > > > PM: > Registered > > nosave memory: > > >>> > 000000000009d000 - > > >>> > > > > 0000000000100000 > > >>> > > > > > > Allocating > PCI > > resources starting > > >>> at > > >>> > b0000000 > > >>> > > (gap: > > >>> > > > > b0000000:4c000000) > > >>> > > > > > > Booting > > paravirtualized kernel on > > >>> Xen > > >>> > > > > > > Xen version: > > 3.4.3-rc4-pre > > >>> (preserve-AD) > > >>> > (dom0) > > >>> > > > > > > NR_CPUS:512 > > nr_cpumask_bits:512 > > >>> > nr_cpu_ids:12 > > >>> > > > nr_node_ids:1 > > >>> > > > > > > PERCPU: > Embedded > > 478 pages/cpu > > >>> > @ffff880005ebc000 > > >>> > > > s1928024 r8192 > > >>> > > > > d21672 > > >>> > > > > > u1957888 > > >>> > > > > > > pcpu-alloc: > > s1928024 r8192 d21672 > > >>> u1957888 > > >>> > > > alloc=478*4096 > > >>> > > > > > > pcpu-alloc: > [0] 00 > > [0] 01 [0] 02 > > >>> [0] 03 > > >>> > [0] 04 > > >>> > > [0] 05 > > >>> > > > [0] 06 > > >>> > > > > [0] 07 > > >>> > > > > > > pcpu-alloc: > [0] 08 > > [0] 09 [0] 10 > > >>> [0] 11 > > >>> > > > > > > Xen: using > > vcpu_info placement > > >>> > > > > > > Built 1 > zonelists > > in Node order, > > >>> mobility > > >>> > > grouping on. > > >>> > > > Total > > >>> > > > > pages: > > >>> > > > > > 409291 > > >>> > > > > > > Policy zone: > DMA32 > > >>> > > > > > > Kernel > command > > line: ro > > >>> > > root=/dev/VolGroup01/LogVol00 > > >>> > > > > console=hvc0 > > >>> > > > > > earlyprintk=xen > > nomodeset > > >>> > > > > > > PID hash > table > > entries: 4096 > > >>> (order: 3, > > >>> > 32768 > > >>> > > bytes) > > >>> > > > > > > Initializing > CPU#0 > > >>> > > > > > > DMA: Placing > 64MB > > software IO TLB > > >>> between > > >>> > > > ffff880007525000 - > > >>> > > > > > > ffff88000b525000 > > >>> > > > > > > DMA: > software IO > > TLB at phys > > >>> 0x7525000 - > > >>> > > 0xb525000 > > >>> > > > > > > > xen_swiotlb_fixup: > > >>> buf=ffff880007525000 > > >>> > > size=67108864 > > >>> > > > > > > > xen_swiotlb_fixup: > > >>> buf=ffff88000b585000 > > >>> > > size=32768 > > >>> > > > > > > Memory: > > 1514268k/1683496k available > > >>> (4654k > > >>> > kernel > > >>> > > code, > > >>> > > > 396k > > >>> > > > > absent, > > >>> > > > > > 168832k > reserved, > > 3443k data, 3396k > > >>> init) > > >>> > > > > > > SLUB: > Genslabs=14, > > HWalign=64, > > >>> Order=0-3, > > >>> > > MinObjects=0, > > >>> > > > > CPUs=12, > > >>> > > > > > Nodes=1 > > >>> > > > > > > Hierarchical > RCU > > implementation. > > >>> > > > > > > NR_IRQS:4352 > > nr_irqs:3072 > > >>> > > > > > > Already > setup the > > GSI :0 > > >>> > > > > > > Already > setup the > > GSI :1 > > >>> > > > > > > Already > setup the > > GSI :2 > > >>> > > > > > > Already > setup the > > GSI :3 > > >>> > > > > > > Already > setup the > > GSI :4 > > >>> > > > > > > Already > setup the > > GSI :5 > > >>> > > > > > > Already > setup the > > GSI :6 > > >>> > > > > > > Already > setup the > > GSI :7 > > >>> > > > > > > Already > setup the > > GSI :8 > > >>> > > > > > > Already > setup the > > GSI :9 > > >>> > > > > > > Already > setup the > > GSI :10 > > >>> > > > > > > Already > setup the > > GSI :11 > > >>> > > > > > > Already > setup the > > GSI :12 > > >>> > > > > > > Already > setup the > > GSI :13 > > >>> > > > > > > Already > setup the > > GSI :14 > > >>> > > > > > > Already > setup the > > GSI :15 > > >>> > > > > > > ACPI: > INT_SRC_OVR > > (bus 0 bus_irq 0 > > >>> > global_irq 2 > > >>> > > dfl dfl) > > >>> > > > > > > ACPI: > INT_SRC_OVR > > (bus 0 bus_irq 9 > > >>> > global_irq 9 > > >>> > > high > > >>> > > > level) > > >>> > > > > > > xen: sci > override: > > source_irq=9 > > >>> > global_irq=9 > > >>> > > trigger=c > > >>> > > > > polarity=1 > > >>> > > > > > > > xen_allocate_pirq: > > returning irq 9 > > >>> for gsi > > >>> > 9 > > >>> > > > > > > Already > setup the > > GSI :9 > > >>> > > > > > > xen: acpi > sci 9 > > >>> > > > > > > Console: > colour > > VGA+ 80x25 > > >>> > > > > > > console > [hvc0] > > enabled, bootconsole > > >>> > disabled > > >>> > > console > > >>> > > > [hvc0] > > >>> > > > > enabled, > > >>> > > > > > bootconsole > disabled > > >>> > > > > > > Lock > dependency > > validator: > > >>> Copyright (c) > > >>> > 2006 Red > > >>> > > Hat, > > >>> > > > Inc., > > >>> > > > > Ingo > > >>> > > > > > Molnar ... > > MAX_LOCKDEP_SUBCLASSES: 8 > > >>> ... > > >>> > > MAX_LOCK_DEPTH: > > >>> > > > > 48 > > >>> > > > > > ... > MAX_LOCKDEP_KEYS: > > 8191 ... > > >>> > > CLASSHASH_SIZE: > > >>> > > > > 4096 ... > > >>> > > > > > > MAX_LOCKDEP_ENTRIES: > > 16384 ... > > >>> > > MAX_LOCKDEP_CHAINS: > > >>> > > > 32768 > > >>> > > > > ... > > >>> > > > > > CHAINHASH_SIZE: > > 16384 > > >>> memory used > > >>> > by lock > > >>> > > > dependency > > >>> > > > > info: > > >>> > > > > > 6367 kB per > > task-struct memory > > >>> footprint: > > >>> > 2688 > > >>> > > bytes > > >>> > > > allocated > > >>> > > > > 17039360 > > >>> > > > > > bytes of > page_cgroup > > please try > > >>> > > 'cgroup_disable=memory' > > >>> > > > option if > > >>> > > > > you > > >>> > > > > > don't want > memory > > cgroups installing > > >>> Xen > > >>> > timer for > > >>> > > CPU 0 > > >>> > > > Detected > > >>> > > > > > 3200.206 MHz > > processor. Calibrating > > >>> delay > > >>> > loop > > >>> > > (skipped), > > >>> > > > value > > >>> > > > > > calculated > using timer > > frequency.. > > >>> 6400.41 > > >>> > BogoMIPS > > >>> > > > (lpj=3200206) > > >>> > > > > > Security > Framework > > initialized > > >>> SELinux: > > >>> > > Initializing. > > >>> > > > Dentry > > >>> > > > > cache hash > > >>> > > > > > table entries: > 262144 > > (order: 9, > > >>> 2097152 > > >>> > bytes) > > >>> > > > Inode-cache hash > > >>> > > > > table > > >>> > > > > > entries: 131072 > > (order: 8, 1048576 > > >>> bytes) > > >>> > > Mount-cache hash > > >>> > > > table > > >>> > > > > > entries: 256 > > Initializing cgroup > > >>> subsys ns > > >>> > > Initializing > > >>> > > > cgroup > > >>> > > > > subsys > > >>> > > > > > cpuacct > Initializing > > cgroup subsys > > >>> memory > > >>> > > Initializing > > >>> > > > cgroup > > >>> > > > > subsys > > >>> > > > > > devices > Initializing > > cgroup subsys > > >>> freezer > > >>> > > Initializing > > >>> > > > cgroup > > >>> > > > > subsys > > >>> > > > > > net_cls CPU: L1 > I > > cache: 32K, L1 D > > >>> cache: > > >>> > 32K CPU: > > >>> > > L2 > > >>> > > > cache: 256K > > >>> > > > > CPU: > > >>> > > > > > L3 cache: > 12288K CPU > > 0/0x0 -> Node 0 > > >>> CPU: > > >>> > > Unsupported > > >>> > > > number of > > >>> > > > > siblings > > >>> > > > > > 32 Performance > Events: > > unsupported p6 > > >>> CPU > > >>> > model 44 > > >>> > > no PMU > > >>> > > > driver, > > >>> > > > > > software events > only. > > lockdep: fixing > > >>> up > > >>> > > alternatives. SMP > > >>> > > > > alternatives: > > >>> > > > > > switching to UP > code > > ACPI: Core > > >>> revision > > >>> > 20090903 > > >>> > > ftrace: > > >>> > > > > converting > > >>> > > > > > mcount calls to > 0f 1f > > 44 00 00 > > >>> ftrace: > > >>> > allocating > > >>> > > 27971 > > >>> > > > entries > > >>> > > > > in 110 > > >>> > > > > > pages > installing Xen > > timer for CPU 1 > > >>> > lockdep: > > >>> > > fixing up > > >>> > > > > alternatives. > > >>> > > > > > SMP > alternatives: > > switching to SMP > > >>> code > > >>> > > Initializing CPU#1 > > >>> > > > CPU: > > >>> > > > > L1 I > > >>> > > > > > cache: 32K, L1 > D > > cache: 32K CPU: L2 > > >>> cache: > > >>> > 256K > > >>> > > CPU: L3 > > >>> > > > cache: > > >>> > > > > 12288K > > >>> > > > > > CPU 1/0x0 -> > Node 0 > > CPU: Unsupported > > >>> number > > >>> > of > > >>> > > siblings 32 > > >>> > > > > installing > > >>> > > > > > Xen timer for > CPU 2 > > Initializing > > >>> CPU#2 CPU: > > >>> > L1 I > > >>> > > cache: > > >>> > > > 32K, L1 D > > >>> > > > > cache: > > >>> > > > > > 32K CPU: L2 > cache: > > 256K CPU: L3 > > >>> cache: > > >>> > 12288K CPU > > >>> > > 2/0x0 -> > > >>> > > > Node 0 > > >>> > > > > CPU: > > >>> > > > > > Unsupported > number of > > siblings 32 > > >>> installing > > >>> > Xen > > >>> > > timer for > > >>> > > > CPU 3 > > >>> > > > > > Initializing > CPU#3 > > CPU: L1 I cache: > > >>> 32K, L1 > > >>> > D > > >>> > > cache: 32K > > >>> > > > CPU: L2 > > >>> > > > > cache: > > >>> > > > > > 256K CPU: L3 > cache: > > 12288K CPU 3/0x0 > > >>> -> Node > > >>> > 0 CPU: > > >>> > > > Unsupported > > >>> > > > > number > > >>> > > > > > of siblings 32 > > installing Xen timer > > >>> for CPU > > >>> > 4 > > >>> > > Initializing > > >>> > > > CPU#4 > > >>> > > > > CPU: L1 > > >>> > > > > > I cache: 32K, > L1 D > > cache: 32K CPU: L2 > > >>> cache: > > >>> > 256K > > >>> > > CPU: L3 > > >>> > > > cache: > > >>> > > > > 12288K > > >>> > > > > > CPU 4/0x0 -> > Node 0 > > CPU: Unsupported > > >>> number > > >>> > of > > >>> > > siblings 32 > > >>> > > > > installing > > >>> > > > > > Xen timer for > CPU 5 > > Initializing > > >>> CPU#5 CPU: > > >>> > L1 I > > >>> > > cache: > > >>> > > > 32K, L1 D > > >>> > > > > cache: > > >>> > > > > > 32K CPU: L2 > cache: > > 256K CPU: L3 > > >>> cache: > > >>> > 12288K CPU > > >>> > > 5/0x0 -> > > >>> > > > Node 0 > > >>> > > > > CPU: > > >>> > > > > > Unsupported > number of > > siblings 32 > > >>> installing > > >>> > Xen > > >>> > > timer for > > >>> > > > CPU 6 > > >>> > > > > > Initializing > CPU#6 > > CPU: L1 I cache: > > >>> 32K, L1 > > >>> > D > > >>> > > cache: 32K > > >>> > > > CPU: L2 > > >>> > > > > cache: > > >>> > > > > > 256K CPU: L3 > cache: > > 12288K CPU 6/0x0 > > >>> -> Node > > >>> > 0 CPU: > > >>> > > > Unsupported > > >>> > > > > number > > >>> > > > > > of siblings 32 > > installing Xen timer > > >>> for CPU > > >>> > 7 > > >>> > > Initializing > > >>> > > > CPU#7 > > >>> > > > > CPU: L1 > > >>> > > > > > I cache: 32K, > L1 D > > cache: 32K CPU: L2 > > >>> cache: > > >>> > 256K > > >>> > > CPU: L3 > > >>> > > > cache: > > >>> > > > > 12288K > > >>> > > > > > CPU 7/0x0 -> > Node 0 > > CPU: Unsupported > > >>> number > > >>> > of > > >>> > > siblings 32 > > >>> > > > > installing > > >>> > > > > > Xen timer for > CPU 8 > > Initializing > > >>> CPU#8 CPU: > > >>> > L1 I > > >>> > > cache: > > >>> > > > 32K, L1 D > > >>> > > > > cache: > > >>> > > > > > 32K CPU: L2 > cache: > > 256K CPU: L3 > > >>> cache: > > >>> > 12288K CPU > > >>> > > 8/0x0 -> > > >>> > > > Node 0 > > >>> > > > > CPU: > > >>> > > > > > Unsupported > number of > > siblings 32 > > >>> installing > > >>> > Xen > > >>> > > timer for > > >>> > > > CPU 9 > > >>> > > > > > Initializing > CPU#9 > > CPU: L1 I cache: > > >>> 32K, L1 > > >>> > D > > >>> > > cache: 32K > > >>> > > > CPU: L2 > > >>> > > > > cache: > > >>> > > > > > 256K CPU: L3 > cache: > > 12288K CPU 9/0x0 > > >>> -> Node > > >>> > 0 CPU: > > >>> > > > Unsupported > > >>> > > > > number > > >>> > > > > > of siblings 32 > > installing Xen timer > > >>> for CPU > > >>> > 10 > > >>> > > > Initializing > > >>> > > > > CPU#10 CPU: > > >>> > > > > > L1 I cache: > 32K, L1 D > > cache: 32K CPU: > > >>> L2 > > >>> > cache: > > >>> > > 256K CPU: > > >>> > > > L3 > > >>> > > > > cache: > > >>> > > > > > 12288K CPU > 10/0x0 -> > > Node 0 CPU: > > >>> Unsupported > > >>> > number > > >>> > > of > > >>> > > > siblings > > >>> > > > > 32 > > >>> > > > > > installing Xen > timer > > for CPU 11 > > >>> Initializing > > >>> > CPU#11 > > >>> > > CPU: > > >>> > > > L1 I > > >>> > > > > cache: > > >>> > > > > > 32K, L1 D > cache: 32K > > CPU: L2 cache: > > >>> 256K > > >>> > CPU: L3 > > >>> > > cache: > > >>> > > > 12288K > > >>> > > > > CPU > > >>> > > > > > 11/0x0 -> Node > 0 CPU: > > Unsupported > > >>> number of > > >>> > > siblings 32 > > >>> > > > Brought > > >>> > > > > up 12 > > >>> > > > > > CPUs Grant > table > > initialized > > >>> regulator: core > > >>> > > version 0.5 > > >>> > > > Time: > > >>> > > > > 14:45:00 > > >>> > > > > > Date: 03/16/10 > NET: > > Registered > > >>> protocol > > >>> > family 16 > > >>> > > > > xenbus_probe_init ok > > >>> > > > > > ACPI FADT > declares the > > system doesn't > > >>> > support PCIe > > >>> > > ASPM, > > >>> > > > so > > >>> > > > > disable it > > >>> > > > > > ACPI: bus type > pci > > registered PCI: > > >>> MCFG > > >>> > > configuration 0: > > >>> > > > base > > >>> > > > > a0000000 > > >>> > > > > > segment 0 buses > 0 - > > 255 PCI: MCFG > > >>> area at > > >>> > a0000000 > > >>> > > > reserved in > > >>> > > > > E820 PCI: > > >>> > > > > > Using MMCONFIG > at > > a0000000 - afffffff > > >>> PCI: > > >>> > Using > > >>> > > > configuration > > >>> > > > > type 1 > > >>> > > > > > for base access > bio: > > create slab > > >>> <bio-0> at > > >>> > 0 ACPI > > >>> > > Error: > > >>> > > > Field > > >>> > > > > [CPB3] > > >>> > > > > > at 96 exceeds > Buffer > > [NULL] size 64 > > >>> (bits) > > >>> > > > > (20090903/dsopcode-596) > ACPI > > >>> > > > > > Error > (psparse-0537): > > Method > > >>> parse/execution > > >>> > failed > > >>> > > > [\_SB_._OSC] > > >>> > > > > (Node > > >>> > > > > > > ffff880064e00c98), > > >>> AE_AML_BUFFER_LIMIT ACPI: > > >>> > > Interpreter > > >>> > > > enabled > > >>> > > > > ACPI: > > >>> > > > > > (supports S0 S1 > S3 S4 > > S5) ACPI: Using > > >>> IOAPIC > > >>> > for > > >>> > > interrupt > > >>> > > > > routing ACPI > > >>> > > > > > Warning: > Incorrect > > checksum in table > > >>> [ ] > > >>> > - 97, > > >>> > > should > > >>> > > > be DB > > >>> > > > > > > (20090903/tbutils-314) > > ACPI: No dock > > >>> devices > > >>> > found. > > >>> > > ACPI: > > >>> > > > PCI > > >>> > > > > Root > > >>> > > > > > Bridge [PCI0] > > (0000:00) pci > > >>> 0000:00:01.0: > > >>> > PME# > > >>> > > supported > > >>> > > > from D0 > > >>> > > > > D3hot > > >>> > > > > > D3cold pci > > 0000:00:01.0: PME# > > >>> disabled pci > > >>> > > 0000:00:02.0: > > >>> > > > PME# > > >>> > > > > supported > > >>> > > > > > from D0 D3hot > D3cold > > pci > > >>> 0000:00:02.0: PME# > > >>> > > disabled pci > > >>> > > > > 0000:00:03.0: > > >>> > > > > > PME# supported > from D0 > > D3hot D3cold > > >>> pci > > >>> > > 0000:00:03.0: PME# > > >>> > > > > disabled pci > > >>> > > > > > 0000:00:04.0: > PME# > > supported from D0 > > >>> D3hot > > >>> > D3cold > > >>> > > pci > > >>> > > > > 0000:00:04.0: PME# > > >>> > > > > > disabled pci > > 0000:00:05.0: PME# > > >>> supported > > >>> > from D0 > > >>> > > D3hot > > >>> > > > D3cold > > >>> > > > > pci > > >>> > > > > > 0000:00:05.0: > PME# > > disabled pci > > >>> > 0000:00:06.0: PME# > > >>> > > > supported from > > >>> > > > > D0 > > >>> > > > > > D3hot D3cold > pci > > 0000:00:06.0: PME# > > >>> disabled > > >>> > pci > > >>> > > > 0000:00:07.0: > > >>> > > > > PME# > > >>> > > > > > supported from > D0 > > D3hot D3cold pci > > >>> > 0000:00:07.0: > > >>> > > PME# > > >>> > > > disabled > > >>> > > > > pci > > >>> > > > > > 0000:00:08.0: > PME# > > supported from D0 > > >>> D3hot > > >>> > D3cold > > >>> > > pci > > >>> > > > > 0000:00:08.0: PME# > > >>> > > > > > disabled pci > > 0000:00:09.0: PME# > > >>> supported > > >>> > from D0 > > >>> > > D3hot > > >>> > > > D3cold > > >>> > > > > pci > > >>> > > > > > 0000:00:09.0: > PME# > > disabled pci > > >>> > 0000:00:0a.0: PME# > > >>> > > > supported from > > >>> > > > > D0 > > >>> > > > > > D3hot D3cold > pci > > 0000:00:0a.0: PME# > > >>> disabled > > >>> > pci > > >>> > > > 0000:00:13.0: > > >>> > > > > PME# > > >>> > > > > > supported from > D0 > > D3hot D3cold pci > > >>> > 0000:00:13.0: > > >>> > > PME# > > >>> > > > disabled > > >>> > > > > pci > > >>> > > > > > 0000:00:1a.7: > PME# > > supported from D0 > > >>> D3hot > > >>> > D3cold > > >>> > > pci > > >>> > > > > 0000:00:1a.7: PME# > > >>> > > > > > disabled pci > > 0000:00:1c.0: PME# > > >>> supported > > >>> > from D0 > > >>> > > D3hot > > >>> > > > D3cold > > >>> > > > > pci > > >>> > > > > > 0000:00:1c.0: > PME# > > disabled pci > > >>> > 0000:00:1c.4: PME# > > >>> > > > supported from > > >>> > > > > D0 > > >>> > > > > > D3hot D3cold > pci > > 0000:00:1c.4: PME# > > >>> disabled > > >>> > pci > > >>> > > > 0000:00:1c.5: > > >>> > > > > PME# > > >>> > > > > > supported from > D0 > > D3hot D3cold pci > > >>> > 0000:00:1c.5: > > >>> > > PME# > > >>> > > > disabled > > >>> > > > > pci > > >>> > > > > > 0000:00:1d.7: > PME# > > supported from D0 > > >>> D3hot > > >>> > D3cold > > >>> > > pci > > >>> > > > > 0000:00:1d.7: PME# > > >>> > > > > > disabled pci > > 0000:00:1f.0: quirk: > > >>> region > > >>> > 0400-047f > > >>> > > claimed > > >>> > > > by > > >>> > > > > ICH6 > > >>> > > > > > ACPI/GPIO/TCO > pci > > 0000:00:1f.0: > > >>> quirk: > > >>> > region > > >>> > > 0500-053f > > >>> > > > claimed > > >>> > > > > by ICH6 > > >>> > > > > > GPIO pci > 0000:00:1f.0: > > ICH7 LPC > > >>> Generic IO > > >>> > decode 1 > > >>> > > PIO at > > >>> > > > 0680 > > >>> > > > > (mask > > >>> > > > > > 000f) pci > > 0000:00:1f.0: ICH7 LPC > > >>> Generic IO > > >>> > decode > > >>> > > 2 PIO > > >>> > > > at 0ca0 > > >>> > > > > (mask > > >>> > > > > > 000f) pci > > 0000:00:1f.0: ICH7 LPC > > >>> Generic IO > > >>> > decode > > >>> > > 3 PIO > > >>> > > > at 0600 > > >>> > > > > (mask > > >>> > > > > > 001f) pci > > 0000:00:1f.2: PME# > > >>> supported from > > >>> > D3hot > > >>> > > pci > > >>> > > > > 0000:00:1f.2: PME# > > >>> > > > > > disabled pci > > 0000:01:00.0: PME# > > >>> supported > > >>> > from D0 > > >>> > > D3hot > > >>> > > > D3cold > > >>> > > > > pci > > >>> > > > > > 0000:01:00.0: > PME# > > disabled pci > > >>> > 0000:01:00.1: PME# > > >>> > > > supported from > > >>> > > > > D0 > > >>> > > > > > D3hot D3cold > pci > > 0000:01:00.1: PME# > > >>> disabled > > >>> > pci > > >>> > > > 0000:0c:00.0: > > >>> > > > > disabling > > >>> > > > > > ASPM on pre-1.1 > PCIe > > device. You can > > >>> enable > > >>> > it > > >>> > > with > > >>> > > > > 'pcie_aspm=force' > > >>> > > > > > pci > 0000:00:1e.0: > > transparent bridge > > >>> ACPI: > > >>> > PCI Root > > >>> > > Bridge > > >>> > > > [PCI1] > > >>> > > > > > (0000:fe) ACPI: > PCI > > Root Bridge > > >>> [PCI2] > > >>> > (0000:ff) > > >>> > > ACPI: PCI > > >>> > > > > Interrupt > > >>> > > > > > Link [LNKA] > (IRQs 3 4 > > 5 6 7 9 10 *11 > > >>> 12 14 > > >>> > 15) > > >>> > > ACPI: PCI > > >>> > > > > Interrupt Link > > >>> > > > > > [LNKB] (IRQs 3 > 4 5 6 7 > > 9 *10 11 12 14 > > >>> 15) > > >>> > ACPI: PCI > > >>> > > > Interrupt > > >>> > > > > Link > > >>> > > > > > [LNKC] (IRQs 3 > 4 5 6 7 > > *9 10 11 12 14 > > >>> 15) > > >>> > ACPI: PCI > > >>> > > > Interrupt > > >>> > > > > Link > > >>> > > > > > [LNKD] (IRQs 3 > 4 *5 6 > > 7 9 10 11 12 14 > > >>> 15) > > >>> > ACPI: PCI > > >>> > > > Interrupt > > >>> > > > > Link > > >>> > > > > > [LNKE] (IRQs 3 > 4 5 6 7 > > 9 10 11 12 14 > > >>> 15) *0, > > >>> > > disabled. > > >>> > > > ACPI: PCI > > >>> > > > > > Interrupt Link > [LNKF] > > (IRQs 3 4 5 6 7 > > >>> 9 10 > > >>> > *11 12 > > >>> > > 14 15) > > >>> > > > ACPI: > > >>> > > > > PCI > > >>> > > > > > Interrupt Link > [LNKG] > > (IRQs 3 4 5 6 7 > > >>> 9 10 > > >>> > 11 12 14 > > >>> > > 15) > > >>> > > > *0, > > >>> > > > > disabled. > > >>> > > > > > ACPI: PCI > Interrupt > > Link [LNKH] (IRQs > > >>> 3 4 5 > > >>> > 6 7 9 > > >>> > > *10 11 > > >>> > > > 12 14 > > >>> > > > > 15) > > >>> > > > > > > > xenbus_probe_backend_init bus > > >>> registered ok > > >>> > > > > > xenbus_probe_frontend_init > > >>> > > > > > bus registered > ok > > xen_balloon: > > >>> Initialising > > >>> > balloon > > >>> > > driver > > >>> > > > with > > >>> > > > > page > > >>> > > > > > order 0. > vgaarb: > > device added: > > >>> > > > > > > > >>> > > > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none > > >>> > > > vgaarb: > > >>> > > > > loaded > > >>> > > > > > SCSI subsystem > > initialized usbcore: > > >>> > registered new > > >>> > > > interface > > >>> > > > > driver > > >>> > > > > > usbfs usbcore: > > registered new > > >>> interface > > >>> > driver hub > > >>> > > > usbcore: > > >>> > > > > registered > > >>> > > > > > new device > driver usb > > PCI: Using ACPI > > >>> for > > >>> > IRQ > > >>> > > routing > > >>> > > > NetLabel: > > >>> > > > > > Initializing > NetLabel: > > domain hash > > >>> size = > > >>> > 128 > > >>> > > NetLabel: > > >>> > > > > protocols = > > >>> > > > > > UNLABELED > CIPSOv4 > > NetLabel: > > >>> unlabeled > > >>> > traffic > > >>> > > allowed by > > >>> > > > default > > >>> > > > > > Switching to > > clocksource xen kstop/0 > > >>> used > > >>> > greatest > > >>> > > stack > > >>> > > > depth: > > >>> > > > > 6568 > > >>> > > > > > bytes left > kstop/1 > > used greatest > > >>> stack > > >>> > depth: 6536 > > >>> > > bytes > > >>> > > > left > > >>> > > > > pnp: PnP > > >>> > > > > > ACPI init ACPI: > bus > > type pnp > > >>> registered > > >>> > > xen_allocate_pirq: > > >>> > > > > returning irq > > >>> > > > > > 8 for gsi 8 > Already > > setup the GSI :8 > > >>> > > xen_allocate_pirq: > > >>> > > > returning > > >>> > > > > irq 13 > > >>> > > > > > for gsi 13 > Already > > setup the GSI :13 > > >>> pnp: > > >>> > PnP ACPI: > > >>> > > found > > >>> > > > 13 > > >>> > > > > devices > > >>> > > > > > ACPI: ACPI bus > type > > pnp unregistered > > >>> system > > >>> > 00:07: > > >>> > > ioport > > >>> > > > range > > >>> > > > > > 0x500-0x53f has > been > > reserved system > > >>> 00:07: > > >>> > ioport > > >>> > > range > > >>> > > > > 0x400-0x47f has > > >>> > > > > > been reserved > system > > 00:07: ioport > > >>> range > > >>> > > 0x800-0x81f has > > >>> > > > been > > >>> > > > > reserved > > >>> > > > > > system 00:07: > ioport > > range > > >>> 0x2f8-0x2ff has > > >>> > been > > >>> > > reserved > > >>> > > > system > > >>> > > > > 00:07: > > >>> > > > > > iomem range > > 0xfed1c000-0xfed8bffe > > >>> could not > > >>> > be > > >>> > > reserved > > >>> > > > system > > >>> > > > > 00:07: > > >>> > > > > > iomem range > > 0xff000000-0xffffffff > > >>> could not > > >>> > be > > >>> > > reserved > > >>> > > > system > > >>> > > > > 00:07: > > >>> > > > > > iomem range > > 0xfee00000-0xfeefffff has > > >>> been > > >>> > reserved > > >>> > > system > > >>> > > > 00:07: > > >>> > > > > iomem > > >>> > > > > > range > > 0xfe900000-0xfe90001f has been > > >>> > reserved > > >>> > > system > > >>> > > > 00:07: iomem > > >>> > > > > range > > >>> > > > > > > 0xfea00000-0xfea0001f > > has been > > >>> reserved > > >>> > system > > >>> > > 00:07: > > >>> > > > iomem range > > >>> > > > > > > 0xfed1b000-0xfed1bfff > > has been > > >>> reserved pci > > >>> > > 0000:0c:00.0: > > >>> > > > BAR 6: > > >>> > > > > no > > >>> > > > > > parent found > for of > > device > > >>> > [0xffff0000-0xffffffff] > > >>> > > pci > > >>> > > > > 0000:00:01.0: PCI > > >>> > > > > > bridge, > secondary bus > > 0000:01 pci > > >>> > 0000:00:01.0: > > >>> > > IO > > >>> > > > window: > > >>> > > > > > 0x1000-0x1fff > pci > > 0000:00:01.0: MEM > > >>> > window: > > >>> > > > > 0xb1900000-0xb19fffff > pci > > >>> > > > > > 0000:00:01.0: > > PREFETCH window: > > >>> disabled > > >>> > pci > > >>> > > > 0000:00:02.0: PCI > > >>> > > > > bridge, > > >>> > > > > > secondary bus > 0000:02 > > pci > > >>> 0000:00:02.0: IO > > >>> > > window: > > >>> > > > disabled pci > > >>> > > > > > 0000:00:02.0: > MEM > > window: disabled > > >>> pci > > >>> > > 0000:00:02.0: > > >>> > > > PREFETCH > > >>> > > > > > window: > disabled pci > > 0000:00:03.0: > > >>> PCI > > >>> > bridge, > > >>> > > secondary > > >>> > > > bus > > >>> > > > > 0000:03 pci > > >>> > > > > > 0000:00:03.0: > IO > > window: disabled > > >>> pci > > >>> > > 0000:00:03.0: > > >>> > > > MEM > > >>> > > > > window: > > >>> > > > > > disabled pci > > 0000:00:03.0: PREFETCH > > >>> > window: > > >>> > > disabled pci > > >>> > > > > 0000:00:04.0: > > >>> > > > > > PCI bridge, > secondary > > bus 0000:04 pci > > >>> > 0000:00:04.0: > > >>> > > IO > > >>> > > > window: > > >>> > > > > > disabled pci > > 0000:00:04.0: MEM > > >>> window: > > >>> > disabled > > >>> > > pci > > >>> > > > > 0000:00:04.0: > > >>> > > > > > PREFETCH > window: > > disabled pci > > >>> 0000:00:05.0: > > >>> > PCI > > >>> > > bridge, > > >>> > > > secondary > > >>> > > > > bus > > >>> > > > > > 0000:05 pci > > 0000:00:05.0: IO > > >>> window: > > >>> > disabled pci > > >>> > > > 0000:00:05.0: > > >>> > > > > MEM > > >>> > > > > > window: > disabled pci > > 0000:00:05.0: > > >>> > PREFETCH > > >>> > > window: > > >>> > > > disabled > > >>> > > > > pci > > >>> > > > > > 0000:00:06.0: > PCI > > bridge, secondary > > >>> bus > > >>> > 0000:06 pci > > >>> > > > 0000:00:06.0: > > >>> > > > > IO > > >>> > > > > > window: > disabled pci > > 0000:00:06.0: > > >>> MEM > > >>> > window: > > >>> > > disabled > > >>> > > > pci > > >>> > > > > > 0000:00:06.0: > > PREFETCH window: > > >>> disabled > > >>> > pci > > >>> > > > 0000:00:07.0: PCI > > >>> > > > > bridge, > > >>> > > > > > secondary bus > 0000:07 > > pci > > >>> 0000:00:07.0: IO > > >>> > > window: > > >>> > > > disabled pci > > >>> > > > > > 0000:00:07.0: > MEM > > window: disabled > > >>> pci > > >>> > > 0000:00:07.0: > > >>> > > > PREFETCH > > >>> > > > > > window: > disabled pci > > 0000:00:08.0: > > >>> PCI > > >>> > bridge, > > >>> > > secondary > > >>> > > > bus > > >>> > > > > 0000:08 pci > > >>> > > > > > 0000:00:08.0: > IO > > window: disabled > > >>> pci > > >>> > > 0000:00:08.0: > > >>> > > > MEM > > >>> > > > > window: > > >>> > > > > > disabled pci > > 0000:00:08.0: PREFETCH > > >>> > window: > > >>> > > disabled pci > > >>> > > > > 0000:00:09.0: > > >>> > > > > > PCI bridge, > secondary > > bus 0000:09 pci > > >>> > 0000:00:09.0: > > >>> > > IO > > >>> > > > window: > > >>> > > > > > 0x3000-0x3fff > pci > > 0000:00:09.0: MEM > > >>> > window: > > >>> > > > > 0xb1b00000-0xb1cfffff > pci > > >>> > > > > > 0000:00:09.0: > > PREFETCH window: > > >>> > > > > > > 0x000000b1d00000-0x000000b1efffff pci > > >>> > > > > > 0000:00:0a.0: > PCI > > bridge, secondary > > >>> bus > > >>> > 0000:0a pci > > >>> > > > 0000:00:0a.0: > > >>> > > > > IO > > >>> > > > > > window: > disabled pci > > 0000:00:0a.0: > > >>> MEM > > >>> > window: > > >>> > > disabled > > >>> > > > pci > > >>> > > > > > 0000:00:0a.0: > > PREFETCH window: > > >>> disabled > > >>> > pci > > >>> > > > 0000:00:1c.0: PCI > > >>> > > > > bridge, > > >>> > > > > > secondary bus > 0000:0b > > pci > > >>> 0000:00:1c.0: IO > > >>> > > window: > > >>> > > > disabled pci > > >>> > > > > > 0000:00:1c.0: > MEM > > window: disabled > > >>> pci > > >>> > > 0000:00:1c.0: > > >>> > > > PREFETCH > > >>> > > > > > window: > disabled pci > > 0000:00:1c.4: > > >>> PCI > > >>> > bridge, > > >>> > > secondary > > >>> > > > bus > > >>> > > > > 0000:0c pci > > >>> > > > > > 0000:00:1c.4: > IO > > window: disabled > > >>> pci > > >>> > > 0000:00:1c.4: > > >>> > > > MEM > > >>> > > > > window: > > >>> > > > > > > 0xb1000000-0xb18fffff > > pci > > >>> 0000:00:1c.4: > > >>> > PREFETCH > > >>> > > window: > > >>> > > > > > > > 0x000000b0000000-0x000000b0ffffff pci > > >>> > 0000:00:1c.5: > > >>> > > PCI > > >>> > > > bridge, > > >>> > > > > > secondary bus > 0000:0d > > pci > > >>> 0000:00:1c.5: IO > > >>> > > window: > > >>> > > > disabled pci > > >>> > > > > > 0000:00:1c.5: > MEM > > window: disabled > > >>> pci > > >>> > > 0000:00:1c.5: > > >>> > > > PREFETCH > > >>> > > > > > window: > disabled pci > > 0000:00:1e.0: > > >>> PCI > > >>> > bridge, > > >>> > > secondary > > >>> > > > bus > > >>> > > > > 0000:0e pci > > >>> > > > > > 0000:00:1e.0: > IO > > window: disabled > > >>> pci > > >>> > > 0000:00:1e.0: > > >>> > > > MEM > > >>> > > > > window: > > >>> > > > > > disabled pci > > 0000:00:1e.0: PREFETCH > > >>> > window: > > >>> > > disabled pci > > >>> > > > > 0000:00:01.0: > > >>> > > > > > PCI INT A -> > GSI 28 > > (level, low) -> > > >>> IRQ 28 > > >>> > pci > > >>> > > > 0000:00:02.0: PCI > > >>> > > > > INT A > > >>> > > > > > -> GSI 29 > (level, > > low) -> IRQ 29 pci > > >>> > 0000:00:03.0: > > >>> > > PCI INT > > >>> > > > A -> > > >>> > > > > GSI 24 > > >>> > > > > > (level, low) -> > IRQ > > 24 pci > > >>> 0000:00:04.0: PCI > > >>> > INT A > > >>> > > -> GSI > > >>> > > > 25 > > >>> > > > > (level, > > >>> > > > > > low) -> IRQ 25 > pci > > 0000:00:05.0: PCI > > >>> INT A > > >>> > -> GSI > > >>> > > 26 > > >>> > > > (level, low) > > >>> > > > > -> IRQ > > >>> > > > > > 26 pci > 0000:00:06.0: > > PCI INT A -> GSI > > >>> 27 > > >>> > (level, > > >>> > > low) -> > > >>> > > > IRQ 27 > > >>> > > > > pci > > >>> > > > > > 0000:00:07.0: > PCI INT > > A -> GSI 30 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 30 > > >>> > > > pci > > >>> > > > > > 0000:00:08.0: > PCI INT > > A -> GSI 31 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 31 > > >>> > > > pci > > >>> > > > > > 0000:00:09.0: > PCI INT > > A -> GSI 32 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 32 > > >>> > > > pci > > >>> > > > > > 0000:00:0a.0: > PCI INT > > A -> GSI 33 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 33 > > >>> > > > pci > > >>> > > > > > 0000:00:1c.0: > PCI INT > > A -> GSI 16 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 16 > > >>> > > > > > > xen_allocate_pirq: > > returning irq 16 > > >>> for gsi > > >>> > 16 > > >>> > > Already > > >>> > > > setup the > > >>> > > > > GSI :16 > > >>> > > > > > pci > 0000:00:1c.4: PCI > > INT A -> GSI 16 > > >>> > (level, low) > > >>> > > -> IRQ > > >>> > > > 16 pci > > >>> > > > > > 0000:00:1c.5: > PCI INT > > B -> GSI 17 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 17 > > >>> > > > NET: > > >>> > > > > Registered > > >>> > > > > > protocol family > 2 IP > > route cache hash > > >>> table > > >>> > > entries: 65536 > > >>> > > > > (order: 7, > > >>> > > > > > 524288 bytes) > TCP > > established hash > > >>> table > > >>> > entries: > > >>> > > 262144 > > >>> > > > (order: > > >>> > > > > 10, > > >>> > > > > > 4194304 bytes) > TCP > > bind hash table > > >>> entries: > > >>> > 65536 > > >>> > > (order: > > >>> > > > 10, > > >>> > > > > 4718592 > > >>> > > > > > bytes) TCP: > Hash > > tables configured > > >>> > (established > > >>> > > 262144 > > >>> > > > bind > > >>> > > > > 65536) TCP > > >>> > > > > > reno registered > NET: > > Registered > > >>> protocol > > >>> > family 1 > > >>> > > pci > > >>> > > > > 0000:01:00.0: > > >>> > > > > > Disabling L0s > pci > > 0000:01:00.1: > > >>> Disabling > > >>> > L0s > > >>> > > Trying to > > >>> > > > unpack > > >>> > > > > rootfs > > >>> > > > > > image as > initramfs... > > Freeing initrd > > >>> memory: > > >>> > 6474k > > >>> > > freed > > >>> > > > DMA-API: > > >>> > > > > > preallocated > 32768 > > debug entries > > >>> DMA-API: > > >>> > debugging > > >>> > > > enabled by > > >>> > > > > kernel > > >>> > > > > > config PCI-DMA: > Using > > software bounce > > >>> > buffering for > > >>> > > IO > > >>> > > > (SWIOTLB) > > >>> > > > > DMA: > > >>> > > > > > Placing 64MB > software > > IO TLB between > > >>> > > ffff880007525000 - > > >>> > > > > ffff88000b525000 > > >>> > > > > > DMA: software > IO TLB > > at phys > > >>> 0x7525000 - > > >>> > 0xb525000 > > >>> > > audit: > > >>> > > > > initializing > > >>> > > > > > netlink socket > > (disabled) type=2000 > > >>> > > > audit(1268750702.035:1): > > >>> > > > > initialized > > >>> > > > > > HugeTLB > registered 2 > > MB page size, > > >>> > pre-allocated 0 > > >>> > > pages > > >>> > > > VFS: > > >>> > > > > Disk > > >>> > > > > > quotas > dquot_6.5.2 > > Dquot-cache hash > > >>> table > > >>> > entries: > > >>> > > 512 > > >>> > > > (order 0, > > >>> > > > > 4096 > > >>> > > > > > bytes) msgmni > has been > > set to 2970 > > >>> > cryptomgr_test > > >>> > > used > > >>> > > > greatest > > >>> > > > > stack > > >>> > > > > > depth: 5864 > bytes left > > cryptomgr_test > > >>> used > > >>> > greatest > > >>> > > stack > > >>> > > > depth: > > >>> > > > > 5816 > > >>> > > > > > bytes left alg: > No > > test for stdrng > > >>> (krng) > > >>> > Block > > >>> > > layer SCSI > > >>> > > > > generic (bsg) > > >>> > > > > > driver version > 0.4 > > loaded (major 252) > > >>> io > > >>> > scheduler > > >>> > > noop > > >>> > > > > registered io > > >>> > > > > > scheduler > anticipatory > > registered io > > >>> > scheduler > > >>> > > deadline > > >>> > > > > registered io > > >>> > > > > > scheduler cfq > > registered (default) > > >>> > pci_hotplug: PCI > > >>> > > Hot > > >>> > > > Plug PCI > > >>> > > > > Core > > >>> > > > > > version: 0.5 > pciehp > > >>> 0000:00:09.0:pcie04: HPC > > >>> > > vendor_id > > >>> > > > 8086 > > >>> > > > > device_id > > >>> > > > > > 3410 ss_vid 0 > ss_did 0 > > pciehp: PCI > > >>> Express > > >>> > Hot Plug > > >>> > > > Controller > > >>> > > > > Driver > > >>> > > > > > version: 0.4 > acpiphp: > > ACPI Hot Plug > > >>> PCI > > >>> > Controller > > >>> > > Driver > > >>> > > > > version: 0.5 > > >>> > > > > > acpiphp_glue: > Slot 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: > Slot 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: > Slot 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: > Slot 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: > Slot 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: > Slot 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: > Slot 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: > Slot 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > pci-stub: > invalid id > > string "" input: > > >>> Sleep > > >>> > Button > > >>> > > as > > >>> > > > > > > > >>> > > > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 > > >>> > > > ACPI: > > >>> > > > > Sleep > > >>> > > > > > Button [SLPB] > input: > > Power Button as > > >>> > > > > > > > >>> > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > ACPI: > > >>> > > Power > > >>> > > > Button > > >>> > > > > [PWRF] > > >>> > > > > > registering > netback > > hpet_acpi_add: no > > >>> > address or > > >>> > > irqs in > > >>> > > > _CRS > > >>> > > > > > Non-volatile > memory > > driver v1.3 Linux > > >>> > agpgart > > >>> > > interface > > >>> > > > v0.103 > > >>> > > > > Serial: > > >>> > > > > > 8250/16550 > driver, 4 > > ports, IRQ > > >>> sharing > > >>> > enabled > > >>> > > > serial8250: ttyS1 > > >>> > > > > at I/O > > >>> > > > > > 0x2f8 (irq = 3) > is a > > 16550A brd: > > >>> module > > >>> > loaded > > >>> > > loop: > > >>> > > > module > > >>> > > > > loaded > > >>> > > > > > input: > Macintosh mouse > > button > > >>> emulation as > > >>> > > > > > /devices/virtual/input/input2 > > >>> > > > > > ahci > 0000:00:1f.2: PCI > > INT A -> GSI > > >>> 19 > > >>> > (level, low) > > >>> > > -> IRQ > > >>> > > > 19 > > >>> > > > > ahci > > >>> > > > > > 0000:00:1f.2: > AHCI > > 0001.0200 32 slots > > >>> 6 > > >>> > ports 3 > > >>> > > Gbps 0x3f > > >>> > > > impl > > >>> > > > > SATA mode > > >>> > > > > > ahci > 0000:00:1f.2: > > flags: 64bit ncq > > >>> sntf pm > > >>> > led clo > > >>> > > pio > > >>> > > > slum part > > >>> > > > > ccc > > >>> > > > > > ems scsi0 : > ahci > > scsi1 : ahci scsi2 > > >>> : ahci > > >>> > scsi3 : > > >>> > > ahci > > >>> > > > scsi4 : > > >>> > > > > ahci > > >>> > > > > > scsi5 : ahci > ata1: > > SATA max UDMA/133 > > >>> > irq_stat > > >>> > > 0x00400040, > > >>> > > > > connection > > >>> > > > > > status changed > irq > > 2996 ata2: SATA > > >>> max > > >>> > UDMA/133 > > >>> > > abar > > >>> > > > > m2048@0xb1a00000 > > >>> > > > > > port 0xb1a00180 > irq > > 2996 ata3: SATA > > >>> max > > >>> > UDMA/133 > > >>> > > abar > > >>> > > > > m2048@0xb1a00000 > > >>> > > > > > port 0xb1a00200 > irq > > 2996 ata4: SATA > > >>> max > > >>> > UDMA/133 > > >>> > > abar > > >>> > > > > m2048@0xb1a00000 > > >>> > > > > > port 0xb1a00280 > irq > > 2996 ata5: SATA > > >>> max > > >>> > UDMA/133 > > >>> > > abar > > >>> > > > > m2048@0xb1a00000 > > >>> > > > > > port 0xb1a00300 > irq > > 2996 ata6: SATA > > >>> max > > >>> > UDMA/133 > > >>> > > abar > > >>> > > > > m2048@0xb1a00000 > > >>> > > > > > port 0xb1a00380 > irq > > 2996 Fixed MDIO > > >>> Bus: > > >>> > probed > > >>> > > ehci_hcd: > > >>> > > > USB 2.0 > > >>> > > > > > 'Enhanced' Host > > Controller (EHCI) > > >>> Driver > > >>> > ehci_hcd > > >>> > > > 0000:00:1a.7: > > >>> > > > > PCI INT > > >>> > > > > > C -> GSI 18 > (level, > > low) -> IRQ 18 > > >>> ehci_hcd > > >>> > > 0000:00:1a.7: > > >>> > > > EHCI > > >>> > > > > Host > > >>> > > > > > Controller > ehci_hcd > > 0000:00:1a.7: new > > >>> USB > > >>> > bus > > >>> > > registered, > > >>> > > > > assigned bus > > >>> > > > > > number 1 > ehci_hcd > > 0000:00:1a.7: debug > > >>> port 1 > > >>> > > ehci_hcd > > >>> > > > > 0000:00:1a.7: irq > > >>> > > > > > 18, io mem > 0xb1a02000 > > ehci_hcd > > >>> 0000:00:1a.7: > > >>> > USB > > >>> > > 2.0 > > >>> > > > started, > > >>> > > > > EHCI 1.00 > > >>> > > > > > usb usb1: New > USB > > device found, > > >>> > idVendor=1d6b, > > >>> > > > idProduct=0002 usb > > >>> > > > > usb1: > > >>> > > > > > New USB device > > strings: Mfr=3, > > >>> Product=2, > > >>> > > SerialNumber=1 > > >>> > > > usb > > >>> > > > > usb1: > > >>> > > > > > Product: EHCI > Host > > Controller usb > > >>> usb1: > > >>> > > Manufacturer: > > >>> > > > Linux > > >>> > > > > 2.6.32.9 > > >>> > > > > > ehci_hcd usb > usb1: > > SerialNumber: > > >>> > 0000:00:1a.7 usb > > >>> > > usb1: > > >>> > > > > configuration #1 > > >>> > > > > > chosen from 1 > choice > > hub 1-0:1.0: USB > > >>> hub > > >>> > found hub > > >>> > > > 1-0:1.0: 6 > > >>> > > > > ports > > >>> > > > > > detected > ehci_hcd > > 0000:00:1d.7: PCI > > >>> INT A -> > > >>> > GSI 23 > > >>> > > > (level, low) > > >>> > > > > -> IRQ > > >>> > > > > > 23 ehci_hcd > > 0000:00:1d.7: EHCI Host > > >>> > Controller > > >>> > > ehci_hcd > > >>> > > > > 0000:00:1d.7: > > >>> > > > > > new USB bus > > registered, assigned bus > > >>> number > > >>> > 2 > > >>> > > ehci_hcd > > >>> > > > > 0000:00:1d.7: > > >>> > > > > > debug port 1 > ehci_hcd > > 0000:00:1d.7: > > >>> irq 23, > > >>> > io mem > > >>> > > > 0xb1a01000 > > >>> > > > > ehci_hcd > > >>> > > > > > 0000:00:1d.7: > USB 2.0 > > started, EHCI > > >>> 1.00 usb > > >>> > usb2: > > >>> > > New USB > > >>> > > > device > > >>> > > > > found, > > >>> > > > > > idVendor=1d6b, > > idProduct=0002 usb > > >>> usb2: New > > >>> > USB > > >>> > > device > > >>> > > > strings: > > >>> > > > > Mfr=3, > > >>> > > > > > Product=2, > > SerialNumber=1 usb usb2: > > >>> Product: > > >>> > EHCI > > >>> > > Host > > >>> > > > Controller > > >>> > > > > usb > > >>> > > > > > usb2: > Manufacturer: > > Linux 2.6.32.9 > > >>> ehci_hcd > > >>> > usb > > >>> > > usb2: > > >>> > > > > SerialNumber: > > >>> > > > > > 0000:00:1d.7 > usb usb2: > > configuration > > >>> #1 > > >>> > chosen from > > >>> > > 1 > > >>> > > > choice hub > > >>> > > > > > 2-0:1.0: USB > hub found > > hub 2-0:1.0: 6 > > >>> ports > > >>> > > detected > > >>> > > > ohci_hcd: > > >>> > > > > USB 1.1 > > >>> > > > > > 'Open' Host > Controller > > (OHCI) Driver > > >>> > uhci_hcd: USB > > >>> > > > Universal Host > > >>> > > > > > Controller > Interface > > driver > > >>> > xen_allocate_pirq: > > >>> > > returning > > >>> > > > irq 16 > > >>> > > > > for gsi > > >>> > > > > > 16 Already > setup the > > GSI :16 uhci_hcd > > >>> > 0000:00:1a.0: > > >>> > > PCI > > >>> > > > INT A -> > > >>> > > > > GSI 16 > > >>> > > > > > (level, low) -> > IRQ > > 16 uhci_hcd > > >>> > 0000:00:1a.0: UHCI > > >>> > > Host > > >>> > > > > Controller > > >>> > > > > > uhci_hcd > 0000:00:1a.0: > > new USB bus > > >>> > registered, > > >>> > > assigned > > >>> > > > bus > > >>> > > > > number 3 > > >>> > > > > > uhci_hcd > 0000:00:1a.0: > > irq 16, io > > >>> base > > >>> > 0x000020e0 > > >>> > > usb > > >>> > > > usb3: New > > >>> > > > > USB > > >>> > > > > > device found, > > idVendor=1d6b, > > >>> idProduct=0001 > > >>> > usb > > >>> > > usb3: New > > >>> > > > USB > > >>> > > > > device > > >>> > > > > > strings: Mfr=3, > > Product=2, > > >>> SerialNumber=1 > > >>> > usb usb3: > > >>> > > > Product: UHCI > > >>> > > > > Host > > >>> > > > > > Controller usb > usb3: > > Manufacturer: > > >>> Linux > > >>> > 2.6.32.9 > > >>> > > uhci_hcd > > >>> > > > usb > > >>> > > > > usb3: > > >>> > > > > > SerialNumber: > > 0000:00:1a.0 usb usb3: > > >>> > configuration > > >>> > > #1 > > >>> > > > chosen from > > >>> > > > > 1 > > >>> > > > > > choice hub > 3-0:1.0: > > USB hub found hub > > >>> > 3-0:1.0: 2 > > >>> > > ports > > >>> > > > detected > > >>> > > > > uhci_hcd > > >>> > > > > > 0000:00:1a.1: > PCI INT > > B -> GSI 21 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 21 > > >>> > > > uhci_hcd > > >>> > > > > > 0000:00:1a.1: > UHCI > > Host Controller > > >>> uhci_hcd > > >>> > > 0000:00:1a.1: > > >>> > > > new USB > > >>> > > > > bus > > >>> > > > > > registered, > assigned > > bus number 4 > > >>> uhci_hcd > > >>> > > 0000:00:1a.1: > > >>> > > > irq 21, > > >>> > > > > io base > > >>> > > > > > 0x000020c0 usb > usb4: > > New USB device > > >>> found, > > >>> > > idVendor=1d6b, > > >>> > > > > idProduct=0001 > > >>> > > > > > usb usb4: New > USB > > device strings: > > >>> Mfr=3, > > >>> > Product=2, > > >>> > > > > SerialNumber=1 usb > > >>> > > > > > usb4: Product: > UHCI > > Host Controller > > >>> usb > > >>> > usb4: > > >>> > > > Manufacturer: Linux > > >>> > > > > > 2.6.32.9 > uhci_hcd usb > > usb4: > > >>> SerialNumber: > > >>> > > 0000:00:1a.1 usb > > >>> > > > usb4: > > >>> > > > > > configuration > #1 > > chosen from 1 choice > > >>> hub > > >>> > 4-0:1.0: > > >>> > > USB hub > > >>> > > > found > > >>> > > > > hub > > >>> > > > > > 4-0:1.0: 2 > ports > > detected > > >>> xen_allocate_pirq: > > >>> > > returning irq > > >>> > > > 19 for > > >>> > > > > gsi 19 > > >>> > > > > > Already setup > the GSI > > :19 uhci_hcd > > >>> > 0000:00:1a.2: > > >>> > > PCI INT D > > >>> > > > -> GSI > > >>> > > > > 19 > > >>> > > > > > (level, low) -> > IRQ > > 19 uhci_hcd > > >>> > 0000:00:1a.2: UHCI > > >>> > > Host > > >>> > > > > Controller > > >>> > > > > > uhci_hcd > 0000:00:1a.2: > > new USB bus > > >>> > registered, > > >>> > > assigned > > >>> > > > bus > > >>> > > > > number 5 > > >>> > > > > > uhci_hcd > 0000:00:1a.2: > > irq 19, io > > >>> base > > >>> > 0x000020a0 > > >>> > > usb > > >>> > > > usb5: New > > >>> > > > > USB > > >>> > > > > > device found, > > idVendor=1d6b, > > >>> idProduct=0001 > > >>> > usb > > >>> > > usb5: New > > >>> > > > USB > > >>> > > > > device > > >>> > > > > > strings: Mfr=3, > > Product=2, > > >>> SerialNumber=1 > > >>> > usb usb5: > > >>> > > > Product: UHCI > > >>> > > > > Host > > >>> > > > > > Controller usb > usb5: > > Manufacturer: > > >>> Linux > > >>> > 2.6.32.9 > > >>> > > uhci_hcd > > >>> > > > usb > > >>> > > > > usb5: > > >>> > > > > > SerialNumber: > > 0000:00:1a.2 usb usb5: > > >>> > configuration > > >>> > > #1 > > >>> > > > chosen from > > >>> > > > > 1 > > >>> > > > > > choice hub > 5-0:1.0: > > USB hub found hub > > >>> > 5-0:1.0: 2 > > >>> > > ports > > >>> > > > detected > > >>> > > > > > > xen_allocate_pirq: > > returning irq 23 > > >>> for gsi > > >>> > 23 > > >>> > > Already > > >>> > > > setup the > > >>> > > > > GSI :23 > > >>> > > > > > uhci_hcd > 0000:00:1d.0: > > PCI INT A -> > > >>> GSI 23 > > >>> > (level, > > >>> > > low) -> > > >>> > > > IRQ 23 > > >>> > > > > > uhci_hcd > 0000:00:1d.0: > > UHCI Host > > >>> Controller > > >>> > > uhci_hcd > > >>> > > > > 0000:00:1d.0: new > > >>> > > > > > USB bus > registered, > > assigned bus > > >>> number 6 > > >>> > uhci_hcd > > >>> > > > 0000:00:1d.0: > > >>> > > > > irq 23, > > >>> > > > > > io base > 0x00002080 usb > > usb6: New USB > > >>> device > > >>> > found, > > >>> > > > idVendor=1d6b, > > >>> > > > > > idProduct=0001 > usb > > usb6: New USB > > >>> device > > >>> > strings: > > >>> > > Mfr=3, > > >>> > > > > Product=2, > > >>> > > > > > SerialNumber=1 > usb > > usb6: Product: > > >>> UHCI Host > > >>> > > Controller usb > > >>> > > > usb6: > > >>> > > > > > Manufacturer: > Linux > > 2.6.32.9 uhci_hcd > > >>> usb > > >>> > usb6: > > >>> > > > SerialNumber: > > >>> > > > > > 0000:00:1d.0 > usb usb6: > > configuration > > >>> #1 > > >>> > chosen from > > >>> > > 1 > > >>> > > > choice hub > > >>> > > > > > 6-0:1.0: USB > hub found > > hub 6-0:1.0: 2 > > >>> ports > > >>> > > detected > > >>> > > > > xen_allocate_pirq: > > >>> > > > > > returning irq > 19 for > > gsi 19 Already > > >>> setup > > >>> > the GSI > > >>> > > :19 > > >>> > > > uhci_hcd > > >>> > > > > > 0000:00:1d.1: > PCI INT > > B -> GSI 19 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 19 > > >>> > > > uhci_hcd > > >>> > > > > > 0000:00:1d.1: > UHCI > > Host Controller > > >>> uhci_hcd > > >>> > > 0000:00:1d.1: > > >>> > > > new USB > > >>> > > > > bus > > >>> > > > > > registered, > assigned > > bus number 7 > > >>> uhci_hcd > > >>> > > 0000:00:1d.1: > > >>> > > > irq 19, > > >>> > > > > io base > > >>> > > > > > 0x00002060 usb > usb7: > > New USB device > > >>> found, > > >>> > > idVendor=1d6b, > > >>> > > > > idProduct=0001 > > >>> > > > > > usb usb7: New > USB > > device strings: > > >>> Mfr=3, > > >>> > Product=2, > > >>> > > > > SerialNumber=1 usb > > >>> > > > > > usb7: Product: > UHCI > > Host Controller > > >>> usb > > >>> > usb7: > > >>> > > > Manufacturer: Linux > > >>> > > > > > 2.6.32.9 > uhci_hcd usb > > usb7: > > >>> SerialNumber: > > >>> > > 0000:00:1d.1 usb > > >>> > > > usb7: > > >>> > > > > > configuration > #1 > > chosen from 1 choice > > >>> hub > > >>> > 7-0:1.0: > > >>> > > USB hub > > >>> > > > found > > >>> > > > > hub > > >>> > > > > > 7-0:1.0: 2 > ports > > detected > > >>> xen_allocate_pirq: > > >>> > > returning irq > > >>> > > > 18 for > > >>> > > > > gsi 18 > > >>> > > > > > Already setup > the GSI > > :18 uhci_hcd > > >>> > 0000:00:1d.2: > > >>> > > PCI INT C > > >>> > > > -> GSI > > >>> > > > > 18 > > >>> > > > > > (level, low) -> > IRQ > > 18 uhci_hcd > > >>> > 0000:00:1d.2: UHCI > > >>> > > Host > > >>> > > > > Controller > > >>> > > > > > uhci_hcd > 0000:00:1d.2: > > new USB bus > > >>> > registered, > > >>> > > assigned > > >>> > > > bus > > >>> > > > > number 8 > > >>> > > > > > uhci_hcd > 0000:00:1d.2: > > irq 18, io > > >>> base > > >>> > 0x00002040 > > >>> > > usb > > >>> > > > usb8: New > > >>> > > > > USB > > >>> > > > > > device found, > > idVendor=1d6b, > > >>> idProduct=0001 > > >>> > usb > > >>> > > usb8: New > > >>> > > > USB > > >>> > > > > device > > >>> > > > > > strings: Mfr=3, > > Product=2, > > >>> SerialNumber=1 > > >>> > usb usb8: > > >>> > > > Product: UHCI > > >>> > > > > Host > > >>> > > > > > >>> > > > > >>> > > References > > >>> > > > > >>> > > Visible links > > >>> > > 1. mailto:[20][21][22][24]pasik@iki.fi > > >>> > > 2. mailto:[21][22][23][25]pasik@iki.fi > > >>> > > 3. mailto:[22][23][24][26]pasik@iki.fi > > >>> > > 4. mailto:[23][24][25][27]pasik@iki.fi > > >>> > > 5. mailto:[24][25][26][28]pasik@iki.fi > > >>> > > 6. > > >>> > > > >>> > > > [25][26][27][29]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > 7. > > >>> > > > >>> > > > [26][27][28][30]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > 8. mailto:[27][28][29][31]pasik@iki.fi > > >>> > > 9. > > >>> > > > >>> > > > [28][29][30][32]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > 10. > > >>> > > > >>> > > > [29][30][31][33]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > 11. mailto:[30][31][32][34]pasik@iki.fi > > >>> > > 12. mailto:[31][32][33][35]pasik@iki.fi > > >>> > > 13. > > >>> > > > >>> > > > [32][33][34][36]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > 14. > > >>> > > > >>> > > > [33][34][35][37]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > 15. mailto:[34][35][36][38]pasik@iki.fi > > >>> > > 16. > > >>> > > > >>> > > > [35][36][37][39]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > 17. > > >>> > > > >>> > > > [36][37][38][40]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > 18. mailto:[37][38][39][41]pasik@iki.fi > > >>> > > > >>> > References > > >>> > > > >>> > Visible links > > >>> > 1. mailto:[39][40][42]pasik@iki.fi > > >>> > 2. mailto:[40][41][43]pasik@iki.fi > > >>> > 3. mailto:[41][42][44]pasik@iki.fi > > >>> > 4. mailto:[42][43][45]pasik@iki.fi > > >>> > 5. mailto:[43][44][46]pasik@iki.fi > > >>> > 6. mailto:[44][45][47]pasik@iki.fi > > >>> > 7. > > >>> > > > [45][46][48]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 8. > > >>> > > > [46][47][49]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 9. mailto:[47][48][50]pasik@iki.fi > > >>> > 10. > > >>> > > > [48][49][51]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 11. > > >>> > > > [49][50][52]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 12. mailto:[50][51][53]pasik@iki.fi > > >>> > 13. mailto:[51][52][54]pasik@iki.fi > > >>> > 14. > > >>> > > > [52][53][55]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 15. > > >>> > > > [53][54][56]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 16. mailto:[54][55][57]pasik@iki.fi > > >>> > 17. > > >>> > > > [55][56][58]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 18. > > >>> > > > [56][57][59]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 19. mailto:[57][58][60]pasik@iki.fi > > >>> > 20. mailto:[58][59][61]pasik@iki.fi > > >>> > 21. mailto:[59][60][62]pasik@iki.fi > > >>> > 22. mailto:[60][61][63]pasik@iki.fi > > >>> > 23. mailto:[61][62][64]pasik@iki.fi > > >>> > 24. mailto:[62][63][65]pasik@iki.fi > > >>> > 25. > > >>> > > > [63][64][66]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 26. > > >>> > > > [64][65][67]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 27. mailto:[65][66][68]pasik@iki.fi > > >>> > 28. > > >>> > > > [66][67][69]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 29. > > >>> > > > [67][68][70]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 30. mailto:[68][69][71]pasik@iki.fi > > >>> > 31. mailto:[69][70][72]pasik@iki.fi > > >>> > 32. > > >>> > > > [70][71][73]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 33. > > >>> > > > [71][72][74]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 34. mailto:[72][73][75]pasik@iki.fi > > >>> > 35. > > >>> > > > [73][74][76]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 36. > > >>> > > > [74][75][77]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 37. mailto:[75][76][78]pasik@iki.fi > > >>> > > >>> References > > >>> > > >>> Visible links > > >>> 1. mailto:[77][79]pasik@iki.fi > > >>> 2. mailto:[78][80]pasik@iki.fi > > >>> 3. mailto:[79][81]pasik@iki.fi > > >>> 4. mailto:[80][82]pasik@iki.fi > > >>> 5. mailto:[81][83]pasik@iki.fi > > >>> 6. mailto:[82][84]pasik@iki.fi > > >>> 7. mailto:[83][85]pasik@iki.fi > > >>> 8. > > > [84][86]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 9. > > > [85][87]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 10. mailto:[86][88]pasik@iki.fi > > >>> 11. > > > [87][89]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 12. > > > [88][90]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 13. mailto:[89][91]pasik@iki.fi > > >>> 14. mailto:[90][92]pasik@iki.fi > > >>> 15. > > > [91][93]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 16. > > > [92][94]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 17. mailto:[93][95]pasik@iki.fi > > >>> 18. > > > [94][96]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 19. > > > [95][97]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 20. mailto:[96][98]pasik@iki.fi > > >>> 21. mailto:[97][99]pasik@iki.fi > > >>> 22. mailto:[98][100]pasik@iki.fi > > >>> 23. mailto:[99][101]pasik@iki.fi > > >>> 24. mailto:[100][102]pasik@iki.fi > > >>> 25. mailto:[101][103]pasik@iki.fi > > >>> 26. > > > [102][104]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 27. > > > [103][105]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 28. mailto:[104][106]pasik@iki.fi > > >>> 29. > > > [105][107]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 30. > > > [106][108]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 31. mailto:[107][109]pasik@iki.fi > > >>> 32. mailto:[108][110]pasik@iki.fi > > >>> 33. > > > [109][111]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 34. > > > [110][112]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 35. mailto:[111][113]pasik@iki.fi > > >>> 36. > > > [112][114]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 37. > > > [113][115]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 38. mailto:[114][116]pasik@iki.fi > > >>> 39. mailto:[115][117]pasik@iki.fi > > >>> 40. mailto:[116][118]pasik@iki.fi > > >>> 41. mailto:[117][119]pasik@iki.fi > > >>> 42. mailto:[118][120]pasik@iki.fi > > >>> 43. mailto:[119][121]pasik@iki.fi > > >>> 44. mailto:[120][122]pasik@iki.fi > > >>> 45. > > > [121][123]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 46. > > > [122][124]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 47. mailto:[123][125]pasik@iki.fi > > >>> 48. > > > [124][126]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 49. > > > [125][127]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 50. mailto:[126][128]pasik@iki.fi > > >>> 51. mailto:[127][129]pasik@iki.fi > > >>> 52. > > > [128][130]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 53. > > > [129][131]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 54. mailto:[130][132]pasik@iki.fi > > >>> 55. > > > [131][133]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 56. > > > [132][134]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 57. mailto:[133][135]pasik@iki.fi > > >>> 58. mailto:[134][136]pasik@iki.fi > > >>> 59. mailto:[135][137]pasik@iki.fi > > >>> 60. mailto:[136][138]pasik@iki.fi > > >>> 61. mailto:[137][139]pasik@iki.fi > > >>> 62. mailto:[138][140]pasik@iki.fi > > >>> 63. > > > [139][141]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 64. > > > [140][142]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 65. mailto:[141][143]pasik@iki.fi > > >>> 66. > > > [142][144]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 67. > > > [143][145]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 68. mailto:[144][146]pasik@iki.fi > > >>> 69. mailto:[145][147]pasik@iki.fi > > >>> 70. > > > [146][148]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 71. > > > [147][149]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 72. mailto:[148][150]pasik@iki.fi > > >>> 73. > > > [149][151]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 74. > > > [150][152]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 75. mailto:[151][153]pasik@iki.fi > > >>> > > >> > > >> > > > > > > > References > > > > Visible links > > 1. mailto:[154]pasik@iki.fi > > 2. mailto:[155]pasik@iki.fi > > 3. mailto:[156]pasik@iki.fi > > 4. mailto:[157]pasik@iki.fi > > 5. mailto:[158]pasik@iki.fi > > 6. mailto:[159]pasik@iki.fi > > 7. mailto:[160]pasik@iki.fi > > 8. mailto:[161]pasik@iki.fi > > 9. > [162]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 10. > [163]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 11. mailto:[164]pasik@iki.fi > > 12. > [165]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 13. > [166]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 14. mailto:[167]pasik@iki.fi > > 15. mailto:[168]pasik@iki.fi > > 16. > [169]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 17. > [170]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 18. mailto:[171]pasik@iki.fi > > 19. > [172]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 20. > [173]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 21. mailto:[174]pasik@iki.fi > > 22. mailto:[175]pasik@iki.fi > > 23. mailto:[176]pasik@iki.fi > > 24. mailto:[177]pasik@iki.fi > > 25. mailto:[178]pasik@iki.fi > > 26. mailto:[179]pasik@iki.fi > > 27. > [180]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 28. > [181]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 29. mailto:[182]pasik@iki.fi > > 30. > [183]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 31. > [184]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 32. mailto:[185]pasik@iki.fi > > 33. mailto:[186]pasik@iki.fi > > 34. > [187]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 35. > [188]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 36. mailto:[189]pasik@iki.fi > > 37. > [190]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 38. > [191]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 39. mailto:[192]pasik@iki.fi > > 40. mailto:[193]pasik@iki.fi > > 41. mailto:[194]pasik@iki.fi > > 42. mailto:[195]pasik@iki.fi > > 43. mailto:[196]pasik@iki.fi > > 44. mailto:[197]pasik@iki.fi > > 45. mailto:[198]pasik@iki.fi > > 46. > [199]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 47. > [200]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 48. mailto:[201]pasik@iki.fi > > 49. > [202]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 50. > [203]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 51. mailto:[204]pasik@iki.fi > > 52. mailto:[205]pasik@iki.fi > > 53. > [206]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 54. > [207]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 55. mailto:[208]pasik@iki.fi > > 56. > [209]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 57. > [210]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 58. mailto:[211]pasik@iki.fi > > 59. mailto:[212]pasik@iki.fi > > 60. mailto:[213]pasik@iki.fi > > 61. mailto:[214]pasik@iki.fi > > 62. mailto:[215]pasik@iki.fi > > 63. mailto:[216]pasik@iki.fi > > 64. > [217]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 65. > [218]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 66. mailto:[219]pasik@iki.fi > > 67. > [220]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 68. > [221]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 69. mailto:[222]pasik@iki.fi > > 70. mailto:[223]pasik@iki.fi > > 71. > [224]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 72. > [225]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 73. mailto:[226]pasik@iki.fi > > 74. > [227]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 75. > [228]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 76. mailto:[229]pasik@iki.fi > > 77. mailto:[230]pasik@iki.fi > > 78. mailto:[231]pasik@iki.fi > > 79. mailto:[232]pasik@iki.fi > > 80. mailto:[233]pasik@iki.fi > > 81. mailto:[234]pasik@iki.fi > > 82. mailto:[235]pasik@iki.fi > > 83. mailto:[236]pasik@iki.fi > > 84. > [237]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 85. > [238]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 86. mailto:[239]pasik@iki.fi > > 87. > [240]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 88. > [241]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 89. mailto:[242]pasik@iki.fi > > 90. mailto:[243]pasik@iki.fi > > 91. > [244]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 92. > [245]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 93. mailto:[246]pasik@iki.fi > > 94. > [247]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 95. > [248]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 96. mailto:[249]pasik@iki.fi > > 97. mailto:[250]pasik@iki.fi > > 98. mailto:[251]pasik@iki.fi > > 99. mailto:[252]pasik@iki.fi > > 100. mailto:[253]pasik@iki.fi > > 101. mailto:[254]pasik@iki.fi > > 102. > [255]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 103. > [256]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 104. mailto:[257]pasik@iki.fi > > 105. > [258]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 106. > [259]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 107. mailto:[260]pasik@iki.fi > > 108. mailto:[261]pasik@iki.fi > > 109. > [262]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 110. > [263]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 111. mailto:[264]pasik@iki.fi > > 112. > [265]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 113. > [266]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 114. mailto:[267]pasik@iki.fi > > 115. mailto:[268]pasik@iki.fi > > 116. mailto:[269]pasik@iki.fi > > 117. mailto:[270]pasik@iki.fi > > 118. mailto:[271]pasik@iki.fi > > 119. mailto:[272]pasik@iki.fi > > 120. mailto:[273]pasik@iki.fi > > 121. > [274]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 122. > [275]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 123. mailto:[276]pasik@iki.fi > > 124. > [277]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 125. > [278]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 126. mailto:[279]pasik@iki.fi > > 127. mailto:[280]pasik@iki.fi > > 128. > [281]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 129. > [282]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 130. mailto:[283]pasik@iki.fi > > 131. > [284]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 132. > [285]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 133. mailto:[286]pasik@iki.fi > > 134. mailto:[287]pasik@iki.fi > > 135. mailto:[288]pasik@iki.fi > > 136. mailto:[289]pasik@iki.fi > > 137. mailto:[290]pasik@iki.fi > > 138. mailto:[291]pasik@iki.fi > > 139. > [292]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 140. > [293]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 141. mailto:[294]pasik@iki.fi > > 142. > [295]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 143. > [296]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 144. mailto:[297]pasik@iki.fi > > 145. mailto:[298]pasik@iki.fi > > 146. > [299]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 147. > [300]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 148. mailto:[301]pasik@iki.fi > > 149. > [302]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 150. > [303]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 151. mailto:[304]pasik@iki.fi > > References > > Visible links > 1. mailto:pasik@iki.fi > 2. http://wiki.xensource.com/xenwiki/XenParavirtOps > 3. mailto:pasik@iki.fi > 4. mailto:pasik@iki.fi > 5. mailto:pasik@iki.fi > 6. mailto:pasik@iki.fi > 7. mailto:pasik@iki.fi > 8. mailto:pasik@iki.fi > 9. mailto:pasik@iki.fi > 10. mailto:pasik@iki.fi > 11. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 12. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 13. mailto:pasik@iki.fi > 14. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 15. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 16. mailto:pasik@iki.fi > 17. mailto:pasik@iki.fi > 18. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 19. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 20. mailto:pasik@iki.fi > 21. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 22. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 23. mailto:pasik@iki.fi > 24. mailto:pasik@iki.fi > 25. mailto:pasik@iki.fi > 26. mailto:pasik@iki.fi > 27. mailto:pasik@iki.fi > 28. mailto:pasik@iki.fi > 29. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 30. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 31. mailto:pasik@iki.fi > 32. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 33. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 34. mailto:pasik@iki.fi > 35. mailto:pasik@iki.fi > 36. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 37. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 38. mailto:pasik@iki.fi > 39. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 40. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 41. mailto:pasik@iki.fi > 42. mailto:pasik@iki.fi > 43. mailto:pasik@iki.fi > 44. mailto:pasik@iki.fi > 45. mailto:pasik@iki.fi > 46. mailto:pasik@iki.fi > 47. mailto:pasik@iki.fi > 48. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 49. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 50. mailto:pasik@iki.fi > 51. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 52. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 53. mailto:pasik@iki.fi > 54. mailto:pasik@iki.fi > 55. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 56. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 57. mailto:pasik@iki.fi > 58. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 59. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 60. mailto:pasik@iki.fi > 61. mailto:pasik@iki.fi > 62. mailto:pasik@iki.fi > 63. mailto:pasik@iki.fi > 64. mailto:pasik@iki.fi > 65. mailto:pasik@iki.fi > 66. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 67. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 68. mailto:pasik@iki.fi > 69. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 70. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 71. mailto:pasik@iki.fi > 72. mailto:pasik@iki.fi > 73. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 74. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 75. mailto:pasik@iki.fi > 76. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 77. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 78. mailto:pasik@iki.fi > 79. mailto:pasik@iki.fi > 80. mailto:pasik@iki.fi > 81. mailto:pasik@iki.fi > 82. mailto:pasik@iki.fi > 83. mailto:pasik@iki.fi > 84. mailto:pasik@iki.fi > 85. mailto:pasik@iki.fi > 86. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 87. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 88. mailto:pasik@iki.fi > 89. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 90. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 91. mailto:pasik@iki.fi > 92. mailto:pasik@iki.fi > 93. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 94. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 95. mailto:pasik@iki.fi > 96. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 97. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 98. mailto:pasik@iki.fi > 99. mailto:pasik@iki.fi > 100. mailto:pasik@iki.fi > 101. mailto:pasik@iki.fi > 102. mailto:pasik@iki.fi > 103. mailto:pasik@iki.fi > 104. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 105. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 106. mailto:pasik@iki.fi > 107. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 108. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 109. mailto:pasik@iki.fi > 110. mailto:pasik@iki.fi > 111. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 112. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 113. mailto:pasik@iki.fi > 114. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 115. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 116. mailto:pasik@iki.fi > 117. mailto:pasik@iki.fi > 118. mailto:pasik@iki.fi > 119. mailto:pasik@iki.fi > 120. mailto:pasik@iki.fi > 121. mailto:pasik@iki.fi > 122. mailto:pasik@iki.fi > 123. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 124. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 125. mailto:pasik@iki.fi > 126. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 127. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 128. mailto:pasik@iki.fi > 129. mailto:pasik@iki.fi > 130. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 131. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 132. mailto:pasik@iki.fi > 133. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 134. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 135. mailto:pasik@iki.fi > 136. mailto:pasik@iki.fi > 137. mailto:pasik@iki.fi > 138. mailto:pasik@iki.fi > 139. mailto:pasik@iki.fi > 140. mailto:pasik@iki.fi > 141. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 142. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 143. mailto:pasik@iki.fi > 144. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 145. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 146. mailto:pasik@iki.fi > 147. mailto:pasik@iki.fi > 148. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 149. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 150. mailto:pasik@iki.fi > 151. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 152. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 153. mailto:pasik@iki.fi > 154. mailto:pasik@iki.fi > 155. mailto:pasik@iki.fi > 156. mailto:pasik@iki.fi > 157. mailto:pasik@iki.fi > 158. mailto:pasik@iki.fi > 159. mailto:pasik@iki.fi > 160. mailto:pasik@iki.fi > 161. mailto:pasik@iki.fi > 162. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 163. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 164. mailto:pasik@iki.fi > 165. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 166. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 167. mailto:pasik@iki.fi > 168. mailto:pasik@iki.fi > 169. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 170. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 171. mailto:pasik@iki.fi > 172. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 173. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 174. mailto:pasik@iki.fi > 175. mailto:pasik@iki.fi > 176. mailto:pasik@iki.fi > 177. mailto:pasik@iki.fi > 178. mailto:pasik@iki.fi > 179. mailto:pasik@iki.fi > 180. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 181. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 182. mailto:pasik@iki.fi > 183. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 184. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 185. mailto:pasik@iki.fi > 186. mailto:pasik@iki.fi > 187. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 188. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 189. mailto:pasik@iki.fi > 190. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 191. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 192. mailto:pasik@iki.fi > 193. mailto:pasik@iki.fi > 194. mailto:pasik@iki.fi > 195. mailto:pasik@iki.fi > 196. mailto:pasik@iki.fi > 197. mailto:pasik@iki.fi > 198. mailto:pasik@iki.fi > 199. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 200. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 201. mailto:pasik@iki.fi > 202. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 203. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 204. mailto:pasik@iki.fi > 205. mailto:pasik@iki.fi > 206. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 207. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 208. mailto:pasik@iki.fi > 209. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 210. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 211. mailto:pasik@iki.fi > 212. mailto:pasik@iki.fi > 213. mailto:pasik@iki.fi > 214. mailto:pasik@iki.fi > 215. mailto:pasik@iki.fi > 216. mailto:pasik@iki.fi > 217. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 218. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 219. mailto:pasik@iki.fi > 220. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 221. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 222. mailto:pasik@iki.fi > 223. mailto:pasik@iki.fi > 224. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 225. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 226. mailto:pasik@iki.fi > 227. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 228. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 229. mailto:pasik@iki.fi > 230. mailto:pasik@iki.fi > 231. mailto:pasik@iki.fi > 232. mailto:pasik@iki.fi > 233. mailto:pasik@iki.fi > 234. mailto:pasik@iki.fi > 235. mailto:pasik@iki.fi > 236. mailto:pasik@iki.fi > 237. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 238. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 239. mailto:pasik@iki.fi > 240. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 241. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 242. mailto:pasik@iki.fi > 243. mailto:pasik@iki.fi > 244. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 245. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 246. mailto:pasik@iki.fi > 247. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 248. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 249. mailto:pasik@iki.fi > 250. mailto:pasik@iki.fi > 251. mailto:pasik@iki.fi > 252. mailto:pasik@iki.fi > 253. mailto:pasik@iki.fi > 254. mailto:pasik@iki.fi > 255. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 256. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 257. mailto:pasik@iki.fi > 258. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 259. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 260. mailto:pasik@iki.fi > 261. mailto:pasik@iki.fi > 262. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 263. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 264. mailto:pasik@iki.fi > 265. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 266. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 267. mailto:pasik@iki.fi > 268. mailto:pasik@iki.fi > 269. mailto:pasik@iki.fi > 270. mailto:pasik@iki.fi > 271. mailto:pasik@iki.fi > 272. mailto:pasik@iki.fi > 273. mailto:pasik@iki.fi > 274. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 275. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 276. mailto:pasik@iki.fi > 277. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 278. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 279. mailto:pasik@iki.fi > 280. mailto:pasik@iki.fi > 281. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 282. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 283. mailto:pasik@iki.fi > 284. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 285. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 286. mailto:pasik@iki.fi > 287. mailto:pasik@iki.fi > 288. mailto:pasik@iki.fi > 289. mailto:pasik@iki.fi > 290. mailto:pasik@iki.fi > 291. mailto:pasik@iki.fi > 292. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 293. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 294. mailto:pasik@iki.fi > 295. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 296. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 297. mailto:pasik@iki.fi > 298. mailto:pasik@iki.fi > 299. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 300. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 301. mailto:pasik@iki.fi > 302. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 303. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 304. mailto:pasik@iki.fi ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: crash in print_all_ICs() 2010-03-22 20:31 ` Pasi Kärkkäinen @ 2010-03-22 21:48 ` kishore kumar 2010-03-23 7:04 ` Re: [Xen-users] " Pasi Kärkkäinen 0 siblings, 1 reply; 32+ messages in thread From: kishore kumar @ 2010-03-22 21:48 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users [-- Attachment #1.1: Type: text/plain, Size: 64643 bytes --] Command line: ro root=/dev/VolGroup01/Logvol00 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10 If I change the Logvol00 to LovVol00 then it booted up. (lower case v to upper case V) Is the command line case sensitive?? On Mon, Mar 22, 2010 at 1:31 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote: > On Mon, Mar 22, 2010 at 01:23:24PM -0700, kishore kumar wrote: > > xend was not running so I did below steps and rebooted. The system > did > > not boot up. SO I removed the line added in /proc/fstab and again > > rebooted. Attached is the captured file. Can you please let me know > what > > is going wrong again? > > > > Please send the logs as text files, not word documents! > > Mounting root filesystem. > mount: could not find filesystem '/dev/root' > Setting up other filesystems. > Setting up new root fs > setuproot: moving /dev failed: No such file or directory > no fstab.sys, mounting internal defaults > setuproot: error mounting /proc: No such file or directory > setuproot: error mounting /sys: No such file or directory > Switching to new root and running init. > unmounting old /dev > unmounting old /proc > unmounting old /sys > switchroot: mount failed: No such file or directory > > Looks like wrong root= parameter again.. > > Command line: ro root=/dev/VolGroup01/Logvol00 console=hvc0 earlyprintk=xen > nomodeset initcall_debug debug loglevel=10 > > Was "/dev/VolGroup01/Logvol00" your root device? > > -- Pasi > > > step 1. I loaded the xen-evtchn.ko by insmod. > > > > > > > > step 2: And added the below line in /proc/fstab. > > > > > > > > none /proc/xen xenfs defaults 0 0 > > > > > > Thanks > > > > On Fri, Mar 19, 2010 at 1:03 PM, Pasi Kärkkäinen <[1]pasik@iki.fi> > wrote: > > > > On Fri, Mar 19, 2010 at 12:57:58PM -0700, kishore kumar wrote: > > > Attached is the captured file. > > > > > > Now the machine booted up. :) 2.6.32.10 is booted. > > > > > > But I dont see xen up and running. > > > > > > Whe I open Virtual Machine Manager I dont see xen running. > > (ATTACHED IS > > > THE SCREEN SHOT). > > > > > > > - Do you have /proc/xen (xenfs) mounted? > > - Do you have xen-evtchn driver module loaded in dom0? > > - Do you have xend running? > > > > Please see and read this wiki page: > > [2]http://wiki.xensource.com/xenwiki/XenParavirtOps > > > > It explains the other configurations you need to do for Xen/xend to > > actually work. > > > > Anyway, the problem for you was wrong grub.conf root= option for the > > dom0 kernel. > > > > -- Pasi > > > > > On Fri, Mar 19, 2010 at 12:05 PM, Pasi Kärkkäinen > > <[1][3]pasik@iki.fi> wrote: > > > > > > On Fri, Mar 19, 2010 at 11:22:54AM -0700, Jeremy Fitzhardinge > > wrote: > > > > On 03/19/2010 10:59 AM, Pasi Kärkkäinen wrote: > > > >> On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar > wrote: > > > >> > > > >>> Attached is the capture log after changing the > grub.conf > > to > > > >>> > > > >>> ro root=/dev/VolGroup01/LogVol00 console=hvc0 > > earlyprintk=xen > > > nomodeset > > > >>> initcall_debug debug swiotlb=force apic=debug > loglevel=10 > > > >>> > > > >>> for the dom 0 kernel command line. > > > >>> > > > >>> > > > >> Hmm, interesting. Now it seems to crash in a different > place. > > > >> > > > >> Jeremy: Have you seen this one earlier? > > > >> > > > > > > > > No, but it looks like the result of "apic=debug" on the > kernel > > command > > > > line. That won't do anything useful (the kernel has no > APICs, > > they > > > all > > > > belong to Xen), and can only cause harm. As it appears to > have > > done. > > > > > > > > > > Ok, my bad. > > > > > > So please remove the "apic=debug" from the dom0 kernel > cmdline > > and try > > > again. > > > It should look like this: > > > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen > > nomodeset > > > initcall_debug debug loglevel=10 > > > > > > -- Pasi > > > > > > > J > > > > > > > >> .... IRQ redirection table: > > > >> NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: > > > >> 00 000 0 0 0 0 0 0 0 00 > > > >> IRQ to pin mappings: > > > >> BUG: unable to handle kernel NULL pointer dereference at > > (null) > > > >> IP: [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 > > > >> PGD 0 > > > >> Oops: 0000 [#1] SMP > > > >> last sysfs file: > > > >> CPU 0 > > > >> Modules linked in: > > > >> Pid: 1, comm: swapper Not tainted 2.6.32.10 #2 > > > >> RIP: e030:[<ffffffff819bf0e0>] [<ffffffff819bf0e0>] > > > print_all_ICs+0x487/0x500 > > > >> RSP: e02b:ffff880064edbe20 EFLAGS: 00010286 > > > >> RAX: ffffffff816ed2c0 RBX: 0000000000000000 RCX: > > 000000000f640f01 > > > >> RDX: ffff880066808000 RSI: ffff880064edbd40 RDI: > > 0000000000000000 > > > >> RBP: ffff880064edbea0 R08: 0000000000000002 R09: > > 0000000000000000 > > > >> R10: 0000000000000000 R11: ffff880064edbce0 R12: > > 0000000000000000 > > > >> R13: 0000000000000000 R14: 0000000000000000 R15: > > 0000000000000000 > > > >> FS: 0000000000000000(0000) GS:ffff880005ec8000(0000) > > > knlGS:0000000000000000 > > > >> CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b > > > >> CR2: 0000000000000000 CR3: 0000000001001000 CR4: > > 0000000000002660 > > > >> DR0: 0000000000000000 DR1: 0000000000000000 DR2: > > 0000000000000000 > > > >> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: > > 0000000000000400 > > > >> Process swapper (pid: 1, threadinfo ffff880064eda000, task > > > ffff880064ee0000) > > > >> Stack: > > > >> ffff880000000000 ffffffff00000000 ffff880000000000 > > ffffffff811ebee8 > > > >> <0> ffff880064edbe60 0000000181083e7c 000000ff00000002 > > > 0000000000000002 > > > >> <0> ffff880000000000 ffffffff810846f0 ffffffff817ce660 > > > 00000000291fd332 > > > >> Call Trace: > > > >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e > > > >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93 > > > >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 > > > >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > > >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc > > > >> [<ffffffff81013eaa>] child_rip+0xa/0x20 > > > >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > > > >> [<ffffffff81013810>] ? restore_args+0x0/0x30 > > > >> [<ffffffff8108ae5b>] ? > trace_hardirqs_off_caller+0x2f/0x89 > > > >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20 > > > >> Code: 45 b0 0f 8c 5b fd ff ff 48 c7 c7 34 40 60 81 31 c0 > 45 31 > > e4 e8 > > > 11 d5 69 ff 31 ff e8 67 b5 6f ff eb 5a 48 85 c0 74 4a 48 8b > 58 > > 40<48> > > > 83 3b 00 74 40 44 89 e6 48 c7 c7 4d 40 60 81 31 c0 e8 e8 d4 > > > >> RIP [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 > > > >> RSP<ffff880064edbe20> > > > >> CR2: 0000000000000000 > > > >> ---[ end trace 0007ad9d59420718 ]--- > > > >> swapper used greatest stack depth: 4168 bytes left > > > >> Kernel panic - not syncing: Attempted to kill init! > > > >> Pid: 1, comm: swapper Tainted: G D 2.6.32.10 #2 > > > >> Call Trace: > > > >> [<ffffffff8105b747>] panic+0xa5/0x167 > > > >> [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf > > > >> [<ffffffff8105f2b3>] ? do_exit+0x38a/0x701 > > > >> [<ffffffff8100f43f>] ? xen_restore_fl_direct_end+0x0/0x1 > > > >> [<ffffffff8108f823>] ? lock_release+0x179/0x184 > > > >> [<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf > > > >> [<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c > > > >> [<ffffffff8105efa7>] do_exit+0x7e/0x701 > > > >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef > > > >> [<ffffffff8147764c>] oops_end+0xbf/0xc7 > > > >> [<ffffffff81038a02>] no_context+0x1f1/0x200 > > > >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef > > > >> [<ffffffff81038c61>] __bad_area_nosemaphore+0x191/0x1b4 > > > >> [<ffffffff8100f452>] ? check_events+0x12/0x20 > > > >> [<ffffffff81038d0e>] bad_area_nosemaphore+0x13/0x15 > > > >> [<ffffffff81478b20>] do_page_fault+0x16d/0x2a2 > > > >> [<ffffffff814769d5>] page_fault+0x25/0x30 > > > >> [<ffffffff819bf0e0>] ? print_all_ICs+0x487/0x500 > > > >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e > > > >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93 > > > >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 > > > >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > > >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc > > > >> [<ffffffff81013eaa>] child_rip+0xa/0x20 > > > >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > > > >> [<ffffffff81013810>] ? restore_args+0x0/0x30 > > > >> [<ffffffff8108ae5b>] ? > trace_hardirqs_off_caller+0x2f/0x89 > > > >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20 > > > >> > > > >> > > > >> -- Pasi > > > >> > > > >> > > > >> > > > >>> > > > >>> On Thu, Mar 18, 2010 at 2:27 PM, Pasi > > > Kärkkäinen<[1][2][4]pasik@iki.fi> wrote: > > > >>> > > > >>> On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore > kumar > > wrote: > > > >>> > pvdisplay does not work in my RHEL machine. > > > >>> > > > > >>> > I did pvscan. > > > >>> > below is the output. > > > >>> > > > > >>> > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / > 0 > > free] > > > >>> > > > > >>> > Total: 1 [232.78 GB] / in use: 1 [232.78 GB] > / in > > no VG: > > > 0 [0 ] > > > >>> > > > > >>> > > > >>> Ok so /dev/sda2 is the correct device holding the > > VolGroup01. > > > >>> > > > >>> Looking at your latest capture.doc I see this: > > > >>> > > > >>> Command line: ro root=/dev/vg00/lv01 console=hvc0 > > > earlyprintk=xen > > > >>> nomodeset initcall_debug debug swiotlb=force > apic=debug > > > loglevel=10 > > > >>> > > > >>> So your root= parameter is wrong! Edit grub.conf > and > > replace > > > it with the > > > >>> actual root device: > > > >>> root=/dev/VolGroup01/LogVol00 > > > >>> > > > >>> -- Pasi > > > >>> > > > >>> > On Thu, Mar 18, 2010 at 12:31 PM, Pasi > Kärkkäinen > > > >>> <[1][2][3][5]pasik@iki.fi> wrote: > > > >>> > > > > >>> > On Thu, Mar 18, 2010 at 11:16:26AM -0700, > > kishore > > > kumar wrote: > > > >>> > > I did the below steps for pvops dom 0 > > kernel. > > > >>> > > > > > >>> > > make menuconfig > > > >>> > > make bzImage > > > >>> > > make modules > > > >>> > > make modules_install > > > >>> > > cp -a .config /boot/config-2.6.32.10 > > > >>> > > cp -a System.map > > /boot/System.map-2.6.32.10 > > > >>> > > cp -a arch/x86/boot/bzImage > > > /boot/vmlinuz-2.6.32.10 > > > >>> > > /sbin/mkinitrd -f --builtin=ahci > > > /boot/initrd-2.6.32.10.img > > > >>> > 2.6.32.10 > > > >>> > > I tried root=/dev/VolGroup01/LogVol00 > . > > > >>> > > > > > >>> > > > > >>> > Ok. > > > >>> > > > > >>> > Please run "pvdisplay" to see which actual > > partition > > > is the LVM > > > >>> PV for > > > >>> > your > > > >>> > volume group. > > > >>> > > > > >>> > Also if you're running Fedora 12 you could > try > > > generating an > > > >>> initrd > > > >>> > image > > > >>> > with dracut instead of mkinitrd. > > > >>> > > > > >>> > -- Pasi > > > >>> > > > > >>> > > > > > >>> > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi > > Kärkkäinen > > > >>> > <[1][2][3][4][6]pasik@iki.fi> wrote: > > > >>> > > > > > >>> > > On Wed, Mar 17, 2010 at 03:20:13PM > > -0700, > > > kishore kumar > > > >>> wrote: > > > >>> > > > Here is the output of df -h > and > > cat > > > /etc/fstab of my > > > >>> > machine. > > > >>> > > > > > > >>> > > > > > >>> > > Did you try both > > > root=/dev/mapper/VolGroup01-LogVol00 and > > > >>> > > root=/dev/VolGroup01/LogVol00 > arguments > > for > > > the dom0 > > > >>> kernel? > > > >>> > > > > > >>> > > How did you generate the initrd > image > > for the > > > dom0 kernel? > > > >>> > > > > > >>> > > Anyway this sounds like a grub.conf > or > > initrd > > > problem, not > > > >>> Xen or > > > >>> > pvops > > > >>> > > dom0 kernel kernel problem. > > > >>> > > > > > >>> > > -- Pasi > > > >>> > > > > > >>> > > > Please let me know your > thoughts. > > > >>> > > > > > > >>> > > > [root@localhost kishore]# df > -h > > > >>> > > > > > > >>> > > > Filesystem Size Used Avail > Use% > > Mounted > > > on > > > >>> > > > > > > >>> > > > > /dev/mapper/VolGroup01-LogVol00 > > > >>> > > > > > > >>> > > > > > 223G > > > 29G 182G 14% > > > >>> / > > > >>> > > > > > > >>> > > > /dev/sda1 99M 81M 13M 87% > /boot > > > >>> > > > > > > >>> > > > tmpfs 757M 0 757M 0% /dev/shm > > > >>> > > > > > > >>> > > > [root@localhost kishore]# > cat > > /etc/fstab > > > >>> > > > > > > >>> > > > /dev/VolGroup01/LogVol00 / > ext3 > > defaults > > > 1 1 > > > >>> > > > > > > >>> > > > LABEL=/boot /boot ext3 > defaults 1 > > 2 > > > >>> > > > > > > >>> > > > tmpfs /dev/shm tmpfs defaults > 0 0 > > > >>> > > > > > > >>> > > > devpts /dev/pts devpts > > gid=5,mode=620 0 > > > 0 > > > >>> > > > > > > >>> > > > sysfs /sys sysfs defaults 0 0 > > > >>> > > > > > > >>> > > > proc /proc proc defaults 0 0 > > > >>> > > > > > > >>> > > > /dev/VolGroup01/LogVol01 swap > > swap > > > defaults 0 0 > > > >>> > > > > > > >>> > > > [root@localhost kishore]# > > > >>> > > > > > > >>> > > > On Tue, Mar 16, 2010 at 4:18 > PM, > > Pasi > > > Kärkkäinen > > > >>> > > <[1][2][3][4][5][7]pasik@iki.fi> > > wrote: > > > >>> > > > > > > >>> > > > On Tue, Mar 16, 2010 at > > 03:40:46PM > > > -0700, kishore > > > >>> kumar > > > >>> > wrote: > > > >>> > > > > I am not sure. Can > you > > please > > > let me know how > > > >>> to > > > >>> > check > > > >>> > > this? any > > > >>> > > > command > > > >>> > > > > ?? > > > >>> > > > > > > >>> > > > well simple "df -h" will > show > > it. and > > > also "cat > > > >>> > /etc/fstab". > > > >>> > > > You can also check it from > your > > grub > > > >>> configuration.. from > > > >>> > the > > > >>> > > working > > > >>> > > > baremetal (non-Xen) entry. > > > >>> > > > > > > >>> > > > -- Pasi > > > >>> > > > > > > > >>> > > > > On Tue, Mar 16, 2010 > at > > 3:29 PM, > > > Pasi > > > >>> Kärkkäinen > > > >>> > > > > > <[1][2][3][4][5][6][8]pasik@iki.fi> > > > wrote: > > > >>> > > > > > > > >>> > > > > On Tue, Mar 16, > 2010 at > > > 03:22:50PM -0700, > > > >>> kishore > > > >>> > kumar > > > >>> > > wrote: > > > >>> > > > > > attached is > the > > log > > > captured in with > > > >>> the word > > > >>> > > document . > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > Scanning logical > > volumes > > > >>> > > > > Reading all > physical > > volumes. > > > This may > > > >>> take a > > > >>> > while... > > > >>> > > > > Activating logical > > volumes > > > >>> > > > > Volume group > > "VolGroup01" not > > > found > > > >>> > > > > Trying to resume > from > > > >>> /dev/VolGroup01/LogVol01 > > > >>> > > > > Unable to access > resume > > device > > > >>> > (/dev/VolGroup01/LogVol01) > > > >>> > > > > Creating root > device. > > > >>> > > > > Mounting root > > filesystem. > > > >>> > > > > mount: could not > find > > > filesystem '/dev/root' > > > >>> > > > > Setting up other > > filesystems. > > > >>> > > > > Setting up new root > fs > > > >>> > > > > setuproot: moving > /dev > > failed: > > > No such file > > > >>> or > > > >>> > directory > > > >>> > > > > no fstab.sys, > mounting > > > internal defaults > > > >>> > > > > setuproot: error > > mounting > > > /proc: No such > > > >>> file or > > > >>> > directory > > > >>> > > > > setuproot: error > > mounting > > > /sys: No such file > > > >>> or > > > >>> > directory > > > >>> > > > > Switching to new > root > > and > > > running init. > > > >>> > > > > unmounting old /dev > > > >>> > > > > unmounting old > /proc > > > >>> > > > > unmounting old /sys > > > >>> > > > > switchroot: mount > > failed: No > > > such file or > > > >>> directory > > > >>> > > > > init used greatest > > stack > > > depth: 4088 bytes > > > >>> left > > > >>> > > > > Kernel panic - not > > syncing: > > > Attempted to > > > >>> kill init! > > > >>> > > > > > > > >>> > > > > So it seems it gets > all > > the > > > way to executing > > > >>> the > > > >>> > initrd > > > >>> > > image, > > > >>> > > > > which then fails to > > mount the > > > root fs. > > > >>> > > > > > > > >>> > > > > Earlier in the log: > > > >>> > > > > ata1: SATA link up > 3.0 > > Gbps > > > (SStatus 123 > > > >>> SControl > > > >>> > 300) > > > >>> > > > > ata1.00: ATA-8: > Hitachi > > > HDT721025SLA380, > > > >>> STBOA3AA, > > > >>> > max > > > >>> > > UDMA/133 > > > >>> > > > > ata1.00: 488397168 > > sectors, > > > multi 0: LBA48 > > > >>> NCQ > > > >>> > (depth > > > >>> > > 31/32), AA > > > >>> > > > > ata1.00: configured > for > > > UDMA/133 > > > >>> > > > > scsi 0:0:0:0: > > Direct-Access > > > ATA > > > >>> Hitachi > > > >>> > HDT72102 > > > >>> > > STBO > > > >>> > > > PQ: 0 > > > >>> > > > > ANSI: 5 > > > >>> > > > > sd 0:0:0:0: > Attached > > scsi > > > generic sg0 type 0 > > > >>> > > > > sd 0:0:0:0: [sda] > > 488397168 > > > 512-byte logical > > > >>> > blocks: (250 > > > >>> > > GB/232 > > > >>> > > > GiB) > > > >>> > > > > sd 0:0:0:0: [sda] > Write > > > Protect is off > > > >>> > > > > sd 0:0:0:0: [sda] > Mode > > Sense: > > > 00 3a 00 00 > > > >>> > > > > sd 0:0:0:0: [sda] > Write > > cache: > > > enabled, read > > > >>> cache: > > > >>> > > enabled, > > > >>> > > > doesn't > > > >>> > > > > support DPO or FUA > > > >>> > > > > sda: sda1 sda2 > > > >>> > > > > sd 0:0:0:0: [sda] > > Attached > > > SCSI disk > > > >>> > > > > > > > >>> > > > > so /dev/sda was > > detected. Is > > > your root lvm > > > >>> volume > > > >>> > on > > > >>> > > /dev/sda ? > > > >>> > > > > Is > > /dev/VolGroup01/LogVol01 > > > really your root > > > >>> fs? > > > >>> > > > > > > > >>> > > > > -- Pasi > > > >>> > > > > > > > >>> > > > > > > > > >>> > > > > > > > > >>> > > > > > On Tue, Mar > 16, > > 2010 at > > > 3:03 PM, Pasi > > > >>> > Kärkkäinen > > > >>> > > > > > > > <[1][2][3][4][5][6][7][9]pasik@iki.fi> wrote: > > > >>> > > > > > > > > >>> > > > > > On Tue, Mar > 16, > > 2010 > > > at 02:56:06PM > > > >>> -0700, > > > >>> > kishore > > > >>> > > kumar > > > >>> > > > wrote: > > > >>> > > > > > > > Please > > find the > > > attached log > > > >>> file after > > > >>> > fixing > > > >>> > > the > > > >>> > > > dom 0 > > > >>> > > > > kernel cmd > > > >>> > > > > > line > > > >>> > > > > > > as > below > > > >>> > > > > > > > > > >>> > > > > > > ro > > > root=/dev/VolGroup01/LogVol00 > > > >>> > console=hvc0 > > > >>> > > > > earlyprintk=xen > > > >>> > > > > > nomodeset > > > >>> > > > > > > > > > >>> > > > > > > > > >>> > > > > > There's > > something > > > wrong with the log, > > > >>> the > > > >>> > dom0 > > > >>> > > kernel > > > >>> > > > parts are > > > >>> > > > > all on > > > >>> > > > > > one line.. > > > >>> > > > > > It's really > > difficult > > > to read it. > > > >>> > > > > > > > > >>> > > > > > -- Pasi > > > >>> > > > > > > > > >>> > > > > > > > Thanks > > > >>> > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > On > Tue, > > Mar 16, > > > 2010 at 2:29 PM, > > > >>> Pasi > > > >>> > > Kärkkäinen > > > >>> > > > > > > > > <[1][2][3][4][5][6][7][8][10]pasik@iki.fi> > > > >>> wrote: > > > >>> > > > > > > > > > >>> > > > > > > On > Tue, > > Mar > > > 16, 2010 at > > > >>> 02:16:22PM > > > >>> > -0700, > > > >>> > > kishore > > > >>> > > > kumar > > > >>> > > > > wrote: > > > >>> > > > > > > > > I > > did > > > below steps. > > > >>> > > > > > > > > > > >>> > > > > > > > > > > >>> > > > > > > > > > I > > > pulled DOM 0 kernel > > > >>> from > > > >>> > > > > > > > > > git > > > clone > > > >>> > > > > > > > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > > > git://[1][2][3][4][5][6][7][8][9][11] > git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > >>> > > > > > > > > > > linux-2.6-xen > > > >>> > > > > > > > > > > >>> > > > > > > > > > cd > > > linux-2.6-xen > > > >>> > > > > > > > > > > >>> > > > > > > > > > make > > > clean > > > >>> > > > > > > > > > > >>> > > > > > > > > > cp -a > > > .config .config-old > > > >>> > > > > > > > > > > >>> > > > > > > > > > wget -O > > > .config > > > >>> > > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > > > [2][3][4][5][6][7][8][9][10][12] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > >>> > > > > > > > > > > >>> > > > > > > > > > make > > > oldconfig > > > >>> > > > > > > > > > > >>> > > > > > > > > > make > > > bzImage > > > >>> > > > > > > > > > > >>> > > > > > > > > > make > > > modules > > > >>> > > > > > > > > > > >>> > > > > > > > > > make > > > modules_install > > > >>> > > > > > > > > > > >>> > > > > > > > > > cp -a > > > .config > > > >>> > /boot/config-2.6.32.9 > > > >>> > > > > > > > > > > >>> > > > > > > > > > cp -a > > > System.map > > > >>> > > /boot/System.map-2.6.32.9 > > > >>> > > > > > > > > > > >>> > > > > > > > > > cp -a > > > >>> arch/x86/boot/bzImage > > > >>> > > > /boot/vmlinuz-2.6.32.9 > > > >>> > > > > > > > > > > >>> > > > > > > > > > and > > > modified the > > > >>> grub.conf as > > > >>> > below > > > >>> > > > > > > > > > > >>> > > > > > > > > > > >>> > > > > > > > > > > Root(hd0,0) > > > >>> > > > > > > > > > > >>> > > > > > > > > > kernel > > > /xen.gz > > > >>> console=vga,com1 > > > >>> > > > com1=115200,8n1 > > > >>> > > > > msi=1 > > > >>> > > > > > iommu=1 > > > >>> > > > > > > > > > > >>> > > > > > > > > > module > > > /vmlinuz-2.6.32.9 > > > >>> ro > > > >>> > > > > > > root=/dev/VolGroup01/LogVo100 > > > >>> > > > > > rhgb > > > >>> > > > > > > > quiet > > > >>> > > > > > > > > > > >>> > > > > > > > > > module > > > >>> /initrd-2.6.32.9.img > > > >>> > > > > > > > > > > >>> > > > > > > > > > > >>> > > > > > > > > > and > > > rebooted the machine. > > > >>> Then > > > >>> > It > > > >>> > > booted with > > > >>> > > > some > > > >>> > > > > xen > > > >>> > > > > > messages > > > >>> > > > > > > and > > > >>> > > > > > > > > > stopped. > > > Those were the > > > >>> > messages > > > >>> > > captured > > > >>> > > > from > > > >>> > > > > serial > > > >>> > > > > > console. > > > >>> > > > > > > > > > > >>> > > > > > > > > > Please > > > let me know if I > > > >>> did > > > >>> > something > > > >>> > > wrong > > > >>> > > > here. > > > >>> > > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > > Please > > fix the > > > kernel cmdline > > > >>> based > > > >>> > on my > > > >>> > > earlier > > > >>> > > > email, > > > >>> > > > > and > > > >>> > > > > > capture and > > > >>> > > > > > > > post > > the > > > >>> > > > > > > > serial > > console > > > log again! > > > >>> > > > > > > > > > >>> > > > > > > -- > Pasi > > > >>> > > > > > > > > > > >>> > > > > > > > > > > >>> > > > > > > > > > On Tue, > > > Mar 16, 2010 at > > > >>> 1:20 PM, > > > >>> > Pasi > > > >>> > > > Kärkkäinen > > > >>> > > > > > > > > > >>> <[3][4][5][6][7][8][9][10][11][13]pasik@iki.fi> > > > >>> > wrote: > > > >>> > > > > > > > > > > >>> > > > > > > > > > On > > > Tue, Mar 16, 2010 at > > > >>> > 01:16:28PM > > > >>> > > -0700, > > > >>> > > > Jeremy > > > >>> > > > > > > Fitzhardinge > > > >>> > > > > > > > wrote: > > > >>> > > > > > > > > > > On > > > 03/16/2010 12:48 > > > >>> PM, Pasi > > > >>> > > Kärkkäinen > > > >>> > > > wrote: > > > >>> > > > > > > > > > >> On > > > Tue, Mar 16, 2010 > > > >>> at > > > >>> > 09:43:44PM > > > >>> > > +0200, > > > >>> > > > Pasi > > > >>> > > > > > Kärkkäinen > > > >>> > > > > > > > wrote: > > > >>> > > > > > > > > > >> > > > >>> > > > > > > > > > >>> > > > On Tue, Mar 16, > > > >>> 2010 at > > > >>> > > 10:32:17AM > > > >>> > > > -0700, > > > >>> > > > > kishore > > > >>> > > > > > kumar > > > >>> > > > > > > > wrote: > > > >>> > > > > > > > > > >>> > > > >>> > > > > > > > > > >>>> > > > Attached is > > > >>> the > > > >>> > output > > > >>> > > captured > > > >>> > > > from > > > >>> > > > > serial > > > >>> > > > > > console. > > > >>> > > > > > > > > > >>>> > > > >>> > > > > > > > > > >>>> > > > Machine does > > > >>> not boot > > > >>> > after > > > >>> > > > compiling xen > > > >>> > > > > 3.4.3 > > > >>> > > > > > with > > > >>> > > > > > > > pv_ops > > dom > > > >>> > > > > > > > > > 0 > > > kernel. > > > >>> > > > > > > > > > >>>> > > > >>> > > > > > > > > > >>>> > > > Please let me > > > >>> know > > > >>> > what is > > > >>> > > going > > > >>> > > > wrong > > > >>> > > > > here. > > > >>> > > > > > > > > > >>>> > > > >>> > > > > > > > > > >>>> > > > >>> > > > > > > > > > >>> > > > Ok this looks like > > > >>> a bug > > > >>> > that is > > > >>> > > already > > > >>> > > > being > > > >>> > > > > sorted > > > >>> > > > > > out on > > > >>> > > > > > > > > > > xen-devel mailinglist. > > > >>> > > > > > > > > > >>> I > > > added CC to > > > >>> xen-devel. > > > >>> > > > > > > > > > >>> > > > >>> > > > > > > > > > >>> > > > >>> > > > > > > > > > >> > > > >>> > > > > > > > > > > > > > >>> > > > > > > > > > > > > > Those messages are > > > >>> not a > > > >>> > problem in > > > >>> > > > themselves, > > > >>> > > > > but the > > > >>> > > > > > related > > > >>> > > > > > > > > > > problem > > > >>> > > > > > > > > > > is > > > believed to be > > > >>> fixed in > > > >>> > current > > > >>> > > > > > xen/stable-2.6.32.x. > > > >>> > > > > > It > > > >>> > > > > > > > looks > > like > > > >>> > > > > > > > > > > the > > > output stops > > > >>> there > > > >>> > because the > > > >>> > > Xen > > > >>> > > > console > > > >>> > > > > isn't set > > > >>> > > > > > up > > > >>> > > > > > > > > properly > > > >>> > > > > > > > > > for > > > >>> > > > > > > > > > > > > > some reason. > > > >>> > > > > > > > > > > > > > >>> > > > > > > > > > > >>> > > > > > > > > > Yeah, > > > remove "rhgb > > > >>> quiet" from > > > >>> > the > > > >>> > > options.. > > > >>> > > > the > > > >>> > > > > dom0 > > > >>> > > > > > kernel > > > >>> > > > > > > > cmdline > > > >>> > > > > > > > > > should > > > be like this: > > > >>> > > > > > > > > > ro > > > >>> > root=/dev/VolGroup01/LogVol00 > > > >>> > > > console=hvc0 > > > >>> > > > > > > earlyprintk=xen > > > >>> > > > > > > > > nomodeset > > > >>> > > > > > > > > > -- > > > Pasi > > > >>> > > > > > > > > > > >>> > > > > > > > > > References > > > >>> > > > > > > > > > > >>> > > > > > > > > > Visible > > > links > > > >>> > > > > > > > > > 1. > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > > > [5][6][7][8][9][10][11][12][14] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > >>> > > > > > > > > > 2. > > > >>> > > > > > > > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > > > [6][7][8][9][10][11][12][13][15] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > >>> > > > > > > > > > 3. > > > >>> > > > mailto:[7][8][9][10][11][12][13][14][16]pasik@iki.fi > > > >>> > > > > > > > > > >>> > > > > > > > References > > > >>> > > > > > > > > > >>> > > > > > > > Visible > > links > > > >>> > > > > > > 1. > > > >>> > > > mailto:[9][10][11][12][13][14][15][17]pasik@iki.fi > > > >>> > > > > > > 2. > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > > > [10][11][12][13][14][15][16][18] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > >>> > > > > > > 3. > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > > > [11][12][13][14][15][16][17][19] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > >>> > > > > > > 4. > > > >>> > > > mailto:[12][13][14][15][16][17][18][20]pasik@iki.fi > > > >>> > > > > > > 5. > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > > > [13][14][15][16][17][18][19][21] > http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > >>> > > > > > > 6. > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > > > [14][15][16][17][18][19][20][22] > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > >>> > > > > > > 7. > > > >>> > > > mailto:[15][16][17][18][19][20][21][23]pasik@iki.fi > > > >>> > > > > > > > Asserting > > Post > > > complete GPIO!!! > > > >>> > > > > > > Transfer > > control to > > > CSM 16-bit > > > >>> binary for > > > >>> > legacy > > > >>> > > boot > > > >>> > > > > > > __ __ > > > _____ _ _ > > > >>> _____ > > > >>> > > _ _ > > > >>> > > > > > > \ \/ > /___ _ > > __ > > > |___ /| || | > > > >>> |___ / > > > >>> > _ __ > > > >>> > > ___| || | > > > >>> > > > _ > > > >>> > > > > __ _ > > > >>> > > > > > __ ___ > > > >>> > > > > > > \ // > _ \ > > '_ \ > > > |_ \| || |_ > > > >>> |_ \ __| > > > >>> > '__/ > > > >>> > > __| || > > > >>> > > > |_ __| > > > >>> > > > > '_ \| > > > >>> > > > > > '__/ _ \ > > > >>> > > > > > > / \ > __/ > > | | | > > > ___) |__ _| > > > >>> ___) |__| > > > >>> > | | > > > >>> > > (__|__ > > > >>> > > > _|__| > > > >>> > > > > |_) | | > > > >>> > > > > > | __/ > > > >>> > > > > > > > > /_/\_\___|_| |_| > > > |____(_) > > > >>> |_|(_)____/ > > > >>> > |_| > > > >>> > > \___| |_| > > > >>> > > > | > > > >>> > > > > .__/|_| > > > >>> > > > > > \___| > > > >>> > > > > > > > > > >>> > > > |_| > > > >>> > > > > > > (XEN) > Xen > > version > > > 3.4.3-rc4-pre > > > >>> > > (kishore@localdomain) > > > >>> > > > (gcc > > > >>> > > > > version > > > >>> > > > > > 4.1.2 > 20080704 > > (Red > > > Hat 4.1.2-46)) > > > >>> Mon Mar > > > >>> > 15 > > > >>> > > 13:44:31 PDT > > > >>> > > > 2010 > > > >>> > > > > > > (XEN) > Latest > > > ChangeSet: Tue Mar 09 > > > >>> > 18:15:52 2010 > > > >>> > > +0000 > > > >>> > > > > > > > 19924:6e72f8c3c017 > > > >>> > > > > > > (XEN) > > Command line: > > > >>> console=vga,com1 > > > >>> > > com1=115200,8n1 > > > >>> > > > msi=1 > > > >>> > > > > iommu=1 > > > >>> > > > > > > (XEN) > Video > > > information: > > > >>> > > > > > > (XEN) > VGA > > is text > > > mode 80x25, font > > > >>> 8x16 > > > >>> > > > > > > (XEN) > > VBE/DDC > > > methods: none; EDID > > > >>> > transfer time: > > > >>> > > 0 > > > >>> > > > seconds > > > >>> > > > > > > (XEN) > EDID > > info > > > not retrieved > > > >>> because no > > > >>> > DDC > > > >>> > > retrieval > > > >>> > > > method > > > >>> > > > > > detected > > > >>> > > > > > > (XEN) > Disc > > > information: > > > >>> > > > > > > (XEN) > Found > > 1 MBR > > > signatures > > > >>> > > > > > > (XEN) > Found > > 1 EDD > > > information > > > >>> structures > > > >>> > > > > > > (XEN) > > Xen-e820 RAM > > > map: > > > >>> > > > > > > (XEN) > > > 0000000000000000 - > > > >>> 000000000009d000 > > > >>> > > (usable) > > > >>> > > > > > > (XEN) > > > 000000000009d000 - > > > >>> 00000000000a0000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > > > 00000000000e0000 - > > > >>> 0000000000100000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > > > 0000000000100000 - > > > >>> 000000006d597000 > > > >>> > > (usable) > > > >>> > > > > > > (XEN) > > > 000000006d597000 - > > > >>> 000000006d686000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > > > 000000006d686000 - > > > >>> 000000006f598000 > > > >>> > > (usable) > > > >>> > > > > > > (XEN) > > > 000000006f598000 - > > > >>> 000000006f59a000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > > > 000000006f59a000 - > > > >>> 000000006f5af000 > > > >>> > (ACPI > > > >>> > > NVS) > > > >>> > > > > > > (XEN) > > > 000000006f5af000 - > > > >>> 000000006f5d9000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > > > 000000006f5d9000 - > > > >>> 000000006f5f9000 > > > >>> > (ACPI > > > >>> > > data) > > > >>> > > > > > > (XEN) > > > 000000006f5f9000 - > > > >>> 000000006f6df000 > > > >>> > (ACPI > > > >>> > > NVS) > > > >>> > > > > > > (XEN) > > > 000000006f6df000 - > > > >>> 000000006f700000 > > > >>> > (ACPI > > > >>> > > data) > > > >>> > > > > > > (XEN) > > > 000000006f700000 - > > > >>> 0000000080000000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > > > 00000000a0000000 - > > > >>> 00000000b0000000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > > > 00000000fc000000 - > > > >>> 00000000fd000000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > > > 00000000fed1c000 - > > > >>> 00000000fed20000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > > > 00000000ffc00000 - > > > >>> 0000000100000000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > System > > RAM: > > > 1780MB > > > >>> (1823000kB) > > > >>> > > > > > > (XEN) > ACPI: > > RSDP > > > 000F03F0, 0024 (r2 > > > >>> INTEL > > > >>> > ) > > > >>> > > > > > > (XEN) > ACPI: > > XSDT > > > 6F6FE120, 0064 (r1 > > > >>> INTEL > > > >>> > THRLY > > > >>> > > > 0 > > > >>> > > > > > 1000013) > > > >>> > > > > > > (XEN) > ACPI: > > FACP > > > 6F6FD000, 00F4 (r4 > > > >>> INTEL > > > >>> > THRLY > > > >>> > > > 0 > > > >>> > > > > MSFT > > > >>> > > > > > 100000D) > > > >>> > > > > > > (XEN) > ACPI: > > DSDT > > > 6F6F5000, 74F1 (r2 > > > >>> INTEL > > > >>> > THRLY > > > >>> > > > 3 > > > >>> > > > > MSFT > > > >>> > > > > > 100000D) > > > >>> > > > > > > (XEN) > ACPI: > > FACS > > > 6F5F9000, 0040 > > > >>> > > > > > > (XEN) > ACPI: > > APIC > > > 6F6F4000, 01CC (r2 > > > >>> INTEL > > > >>> > THRLY > > > >>> > > > 0 > > > >>> > > > > MSFT > > > >>> > > > > > 100000D) > > > >>> > > > > > > (XEN) > ACPI: > > MCFG > > > 6F6F3000, 003C (r1 > > > >>> INTEL > > > >>> > THRLY > > > >>> > > > 1 > > > >>> > > > > MSFT > > > >>> > > > > > 100000D) > > > >>> > > > > > > (XEN) > ACPI: > > HPET > > > 6F6F2000, 0038 (r1 > > > >>> INTEL > > > >>> > THRLY > > > >>> > > > 1 > > > >>> > > > > MSFT > > > >>> > > > > > 100000D) > > > >>> > > > > > > (XEN) > ACPI: > > SLIT > > > 6F6F1000, 0030 (r1 > > > >>> INTEL > > > >>> > THRLY > > > >>> > > > 1 > > > >>> > > > > MSFT > > > >>> > > > > > 100000D) > > > >>> > > > > > > (XEN) > ACPI: > > WDDT > > > 6F6F0000, 0040 (r1 > > > >>> INTEL > > > >>> > THRLY > > > >>> > > > 0 > > > >>> > > > > MSFT > > > >>> > > > > > 100000D) > > > >>> > > > > > > (XEN) > ACPI: > > SSDT > > > 6F5D9000, 1FDDC > > > >>> (r1 > > > >>> > INTEL SSDT > > > >>> > > PM > > > >>> > > > 4000 > > > >>> > > > > INTL > > > >>> > > > > > 20061109) > > > >>> > > > > > > (XEN) > ACPI: > > DMAR > > > 6F6EE000, 01D0 (r1 > > > >>> INTEL > > [-- Attachment #1.2: Type: text/html, Size: 89464 bytes --] [-- Attachment #2: Type: text/plain, Size: 137 bytes --] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs() 2010-03-22 21:48 ` kishore kumar @ 2010-03-23 7:04 ` Pasi Kärkkäinen 0 siblings, 0 replies; 32+ messages in thread From: Pasi Kärkkäinen @ 2010-03-23 7:04 UTC (permalink / raw) To: kishore kumar; +Cc: Jeremy Fitzhardinge, xen-devel, xen-users On Mon, Mar 22, 2010 at 02:48:18PM -0700, kishore kumar wrote: > Command line: ro root=/dev/VolGroup01/Logvol00 console=hvc0 > earlyprintk=xen nomodeset initcall_debug debug loglevel=10 > > If I change the Logvol00 to LovVol00 then it booted up. (lower case v > to upper case V) > > Is the command line case sensitive?? > Yes, it is case sensitive, just like 99% of the things in Linux/Unix world. -- Pasi > On Mon, Mar 22, 2010 at 1:31 PM, Pasi Kärkkäinen <[1]pasik@iki.fi> wrote: > > On Mon, Mar 22, 2010 at 01:23:24PM -0700, kishore kumar wrote: > > xend was not running so I did below steps and rebooted. The system > did > > not boot up. SO I removed the line added in /proc/fstab and again > > rebooted. Attached is the captured file. Can you please let me > know what > > is going wrong again? > > > > Please send the logs as text files, not word documents! > > Mounting root filesystem. > mount: could not find filesystem '/dev/root' > Setting up other filesystems. > Setting up new root fs > setuproot: moving /dev failed: No such file or directory > no fstab.sys, mounting internal defaults > setuproot: error mounting /proc: No such file or directory > setuproot: error mounting /sys: No such file or directory > Switching to new root and running init. > unmounting old /dev > unmounting old /proc > unmounting old /sys > switchroot: mount failed: No such file or directory > > Looks like wrong root= parameter again.. > > Command line: ro root=/dev/VolGroup01/Logvol00 console=hvc0 > earlyprintk=xen nomodeset initcall_debug debug loglevel=10 > > Was "/dev/VolGroup01/Logvol00" your root device? > > -- Pasi > > > step 1. I loaded the xen-evtchn.ko by insmod. > > > > > > > > step 2: And added the below line in /proc/fstab. > > > > > > > > none /proc/xen xenfs defaults 0 0 > > > > > > Thanks > > > > On Fri, Mar 19, 2010 at 1:03 PM, Pasi Kärkkäinen > <[1][2]pasik@iki.fi> wrote: > > > > On Fri, Mar 19, 2010 at 12:57:58PM -0700, kishore kumar wrote: > > > Attached is the captured file. > > > > > > Now the machine booted up. :) 2.6.32.10 is booted. > > > > > > But I dont see xen up and running. > > > > > > Whe I open Virtual Machine Manager I dont see xen running. > > (ATTACHED IS > > > THE SCREEN SHOT). > > > > > > > - Do you have /proc/xen (xenfs) mounted? > > - Do you have xen-evtchn driver module loaded in dom0? > > - Do you have xend running? > > > > Please see and read this wiki page: > > [2][3]http://wiki.xensource.com/xenwiki/XenParavirtOps > > > > It explains the other configurations you need to do for Xen/xend > to > > actually work. > > > > Anyway, the problem for you was wrong grub.conf root= option for > the > > dom0 kernel. > > > > -- Pasi > > > > > On Fri, Mar 19, 2010 at 12:05 PM, Pasi Kärkkäinen > > <[1][3][4]pasik@iki.fi> wrote: > > > > > > On Fri, Mar 19, 2010 at 11:22:54AM -0700, Jeremy > Fitzhardinge > > wrote: > > > > On 03/19/2010 10:59 AM, Pasi Kärkkäinen wrote: > > > >> On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar > wrote: > > > >> > > > >>> Attached is the capture log after changing the > grub.conf > > to > > > >>> > > > >>> ro root=/dev/VolGroup01/LogVol00 console=hvc0 > > earlyprintk=xen > > > nomodeset > > > >>> initcall_debug debug swiotlb=force apic=debug > loglevel=10 > > > >>> > > > >>> for the dom 0 kernel command line. > > > >>> > > > >>> > > > >> Hmm, interesting. Now it seems to crash in a different > place. > > > >> > > > >> Jeremy: Have you seen this one earlier? > > > >> > > > > > > > > No, but it looks like the result of "apic=debug" on the > kernel > > command > > > > line. That won't do anything useful (the kernel has no > APICs, > > they > > > all > > > > belong to Xen), and can only cause harm. As it appears > to have > > done. > > > > > > > > > > Ok, my bad. > > > > > > So please remove the "apic=debug" from the dom0 kernel > cmdline > > and try > > > again. > > > It should look like this: > > > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 > earlyprintk=xen > > nomodeset > > > initcall_debug debug loglevel=10 > > > > > > -- Pasi > > > > > > > J > > > > > > > >> .... IRQ redirection table: > > > >> NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: > > > >> 00 000 0 0 0 0 0 0 0 00 > > > >> IRQ to pin mappings: > > > >> BUG: unable to handle kernel NULL pointer dereference > at > > (null) > > > >> IP: [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 > > > >> PGD 0 > > > >> Oops: 0000 [#1] SMP > > > >> last sysfs file: > > > >> CPU 0 > > > >> Modules linked in: > > > >> Pid: 1, comm: swapper Not tainted 2.6.32.10 #2 > > > >> RIP: e030:[<ffffffff819bf0e0>] [<ffffffff819bf0e0>] > > > print_all_ICs+0x487/0x500 > > > >> RSP: e02b:ffff880064edbe20 EFLAGS: 00010286 > > > >> RAX: ffffffff816ed2c0 RBX: 0000000000000000 RCX: > > 000000000f640f01 > > > >> RDX: ffff880066808000 RSI: ffff880064edbd40 RDI: > > 0000000000000000 > > > >> RBP: ffff880064edbea0 R08: 0000000000000002 R09: > > 0000000000000000 > > > >> R10: 0000000000000000 R11: ffff880064edbce0 R12: > > 0000000000000000 > > > >> R13: 0000000000000000 R14: 0000000000000000 R15: > > 0000000000000000 > > > >> FS: 0000000000000000(0000) GS:ffff880005ec8000(0000) > > > knlGS:0000000000000000 > > > >> CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b > > > >> CR2: 0000000000000000 CR3: 0000000001001000 CR4: > > 0000000000002660 > > > >> DR0: 0000000000000000 DR1: 0000000000000000 DR2: > > 0000000000000000 > > > >> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: > > 0000000000000400 > > > >> Process swapper (pid: 1, threadinfo ffff880064eda000, > task > > > ffff880064ee0000) > > > >> Stack: > > > >> ffff880000000000 ffffffff00000000 ffff880000000000 > > ffffffff811ebee8 > > > >> <0> ffff880064edbe60 0000000181083e7c 000000ff00000002 > > > 0000000000000002 > > > >> <0> ffff880000000000 ffffffff810846f0 ffffffff817ce660 > > > 00000000291fd332 > > > >> Call Trace: > > > >> [<ffffffff811ebee8>] ? > debugfs_create_file+0x239/0x28e > > > >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93 > > > >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 > > > >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > > >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc > > > >> [<ffffffff81013eaa>] child_rip+0xa/0x20 > > > >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > > > >> [<ffffffff81013810>] ? restore_args+0x0/0x30 > > > >> [<ffffffff8108ae5b>] ? > trace_hardirqs_off_caller+0x2f/0x89 > > > >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20 > > > >> Code: 45 b0 0f 8c 5b fd ff ff 48 c7 c7 34 40 60 81 31 > c0 45 31 > > e4 e8 > > > 11 d5 69 ff 31 ff e8 67 b5 6f ff eb 5a 48 85 c0 74 4a 48 > 8b 58 > > 40<48> > > > 83 3b 00 74 40 44 89 e6 48 c7 c7 4d 40 60 81 31 c0 e8 e8 > d4 > > > >> RIP [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 > > > >> RSP<ffff880064edbe20> > > > >> CR2: 0000000000000000 > > > >> ---[ end trace 0007ad9d59420718 ]--- > > > >> swapper used greatest stack depth: 4168 bytes left > > > >> Kernel panic - not syncing: Attempted to kill init! > > > >> Pid: 1, comm: swapper Tainted: G D 2.6.32.10 #2 > > > >> Call Trace: > > > >> [<ffffffff8105b747>] panic+0xa5/0x167 > > > >> [<ffffffff8100ed81>] ? > xen_force_evtchn_callback+0xd/0xf > > > >> [<ffffffff8105f2b3>] ? do_exit+0x38a/0x701 > > > >> [<ffffffff8100f43f>] ? > xen_restore_fl_direct_end+0x0/0x1 > > > >> [<ffffffff8108f823>] ? lock_release+0x179/0x184 > > > >> [<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf > > > >> [<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c > > > >> [<ffffffff8105efa7>] do_exit+0x7e/0x701 > > > >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef > > > >> [<ffffffff8147764c>] oops_end+0xbf/0xc7 > > > >> [<ffffffff81038a02>] no_context+0x1f1/0x200 > > > >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef > > > >> [<ffffffff81038c61>] > __bad_area_nosemaphore+0x191/0x1b4 > > > >> [<ffffffff8100f452>] ? check_events+0x12/0x20 > > > >> [<ffffffff81038d0e>] bad_area_nosemaphore+0x13/0x15 > > > >> [<ffffffff81478b20>] do_page_fault+0x16d/0x2a2 > > > >> [<ffffffff814769d5>] page_fault+0x25/0x30 > > > >> [<ffffffff819bf0e0>] ? print_all_ICs+0x487/0x500 > > > >> [<ffffffff811ebee8>] ? > debugfs_create_file+0x239/0x28e > > > >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93 > > > >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 > > > >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > > >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc > > > >> [<ffffffff81013eaa>] child_rip+0xa/0x20 > > > >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > > > >> [<ffffffff81013810>] ? restore_args+0x0/0x30 > > > >> [<ffffffff8108ae5b>] ? > trace_hardirqs_off_caller+0x2f/0x89 > > > >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20 > > > >> > > > >> > > > >> -- Pasi > > > >> > > > >> > > > >> > > > >>> > > > >>> On Thu, Mar 18, 2010 at 2:27 PM, Pasi > > > Kärkkäinen<[1][2][4][5]pasik@iki.fi> wrote: > > > >>> > > > >>> On Thu, Mar 18, 2010 at 01:23:41PM -0700, > kishore kumar > > wrote: > > > >>> > pvdisplay does not work in my RHEL > machine. > > > >>> > > > > >>> > I did pvscan. > > > >>> > below is the output. > > > >>> > > > > >>> > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB > / 0 > > free] > > > >>> > > > > >>> > Total: 1 [232.78 GB] / in use: 1 [232.78 > GB] / in > > no VG: > > > 0 [0 ] > > > >>> > > > > >>> > > > >>> Ok so /dev/sda2 is the correct device holding > the > > VolGroup01. > > > >>> > > > >>> Looking at your latest capture.doc I see this: > > > >>> > > > >>> Command line: ro root=/dev/vg00/lv01 > console=hvc0 > > > earlyprintk=xen > > > >>> nomodeset initcall_debug debug swiotlb=force > apic=debug > > > loglevel=10 > > > >>> > > > >>> So your root= parameter is wrong! Edit grub.conf > and > > replace > > > it with the > > > >>> actual root device: > > > >>> root=/dev/VolGroup01/LogVol00 > > > >>> > > > >>> -- Pasi > > > >>> > > > >>> > On Thu, Mar 18, 2010 at 12:31 PM, Pasi > Kärkkäinen > > > >>> <[1][2][3][5][6]pasik@iki.fi> wrote: > > > >>> > > > > >>> > On Thu, Mar 18, 2010 at 11:16:26AM > -0700, > > kishore > > > kumar wrote: > > > >>> > > I did the below steps for pvops > dom 0 > > kernel. > > > >>> > > > > > >>> > > make menuconfig > > > >>> > > make bzImage > > > >>> > > make modules > > > >>> > > make modules_install > > > >>> > > cp -a .config > /boot/config-2.6.32.10 > > > >>> > > cp -a System.map > > /boot/System.map-2.6.32.10 > > > >>> > > cp -a arch/x86/boot/bzImage > > > /boot/vmlinuz-2.6.32.10 > > > >>> > > /sbin/mkinitrd -f --builtin=ahci > > > /boot/initrd-2.6.32.10.img > > > >>> > 2.6.32.10 > > > >>> > > I tried > root=/dev/VolGroup01/LogVol00 . > > > >>> > > > > > >>> > > > > >>> > Ok. > > > >>> > > > > >>> > Please run "pvdisplay" to see which > actual > > partition > > > is the LVM > > > >>> PV for > > > >>> > your > > > >>> > volume group. > > > >>> > > > > >>> > Also if you're running Fedora 12 you > could try > > > generating an > > > >>> initrd > > > >>> > image > > > >>> > with dracut instead of mkinitrd. > > > >>> > > > > >>> > -- Pasi > > > >>> > > > > >>> > > > > > >>> > > On Thu, Mar 18, 2010 at 9:15 AM, > Pasi > > Kärkkäinen > > > >>> > <[1][2][3][4][6][7]pasik@iki.fi> wrote: > > > >>> > > > > > >>> > > On Wed, Mar 17, 2010 at > 03:20:13PM > > -0700, > > > kishore kumar > > > >>> wrote: > > > >>> > > > Here is the output of df > -h and > > cat > > > /etc/fstab of my > > > >>> > machine. > > > >>> > > > > > > >>> > > > > > >>> > > Did you try both > > > root=/dev/mapper/VolGroup01-LogVol00 and > > > >>> > > root=/dev/VolGroup01/LogVol00 > arguments > > for > > > the dom0 > > > >>> kernel? > > > >>> > > > > > >>> > > How did you generate the initrd > image > > for the > > > dom0 kernel? > > > >>> > > > > > >>> > > Anyway this sounds like a > grub.conf or > > initrd > > > problem, not > > > >>> Xen or > > > >>> > pvops > > > >>> > > dom0 kernel kernel problem. > > > >>> > > > > > >>> > > -- Pasi > > > >>> > > > > > >>> > > > Please let me know your > thoughts. > > > >>> > > > > > > >>> > > > [root@localhost kishore]# > df -h > > > >>> > > > > > > >>> > > > Filesystem Size Used Avail > Use% > > Mounted > > > on > > > >>> > > > > > > >>> > > > > /dev/mapper/VolGroup01-LogVol00 > > > >>> > > > > > > >>> > > > > > 223G > > > 29G 182G 14% > > > >>> / > > > >>> > > > > > > >>> > > > /dev/sda1 99M 81M 13M 87% > /boot > > > >>> > > > > > > >>> > > > tmpfs 757M 0 757M 0% > /dev/shm > > > >>> > > > > > > >>> > > > [root@localhost kishore]# > cat > > /etc/fstab > > > >>> > > > > > > >>> > > > /dev/VolGroup01/LogVol00 / > ext3 > > defaults > > > 1 1 > > > >>> > > > > > > >>> > > > LABEL=/boot /boot ext3 > defaults 1 > > 2 > > > >>> > > > > > > >>> > > > tmpfs /dev/shm tmpfs > defaults 0 0 > > > >>> > > > > > > >>> > > > devpts /dev/pts devpts > > gid=5,mode=620 0 > > > 0 > > > >>> > > > > > > >>> > > > sysfs /sys sysfs defaults > 0 0 > > > >>> > > > > > > >>> > > > proc /proc proc defaults 0 > 0 > > > >>> > > > > > > >>> > > > /dev/VolGroup01/LogVol01 > swap > > swap > > > defaults 0 0 > > > >>> > > > > > > >>> > > > [root@localhost kishore]# > > > >>> > > > > > > >>> > > > On Tue, Mar 16, 2010 at > 4:18 PM, > > Pasi > > > Kärkkäinen > > > >>> > > > <[1][2][3][4][5][7][8]pasik@iki.fi> > > wrote: > > > >>> > > > > > > >>> > > > On Tue, Mar 16, 2010 at > > 03:40:46PM > > > -0700, kishore > > > >>> kumar > > > >>> > wrote: > > > >>> > > > > I am not sure. > Can you > > please > > > let me know how > > > >>> to > > > >>> > check > > > >>> > > this? any > > > >>> > > > command > > > >>> > > > > ?? > > > >>> > > > > > > >>> > > > well simple "df -h" will > show > > it. and > > > also "cat > > > >>> > /etc/fstab". > > > >>> > > > You can also check it > from your > > grub > > > >>> configuration.. from > > > >>> > the > > > >>> > > working > > > >>> > > > baremetal (non-Xen) > entry. > > > >>> > > > > > > >>> > > > -- Pasi > > > >>> > > > > > > > >>> > > > > On Tue, Mar 16, > 2010 at > > 3:29 PM, > > > Pasi > > > >>> Kärkkäinen > > > >>> > > > > > <[1][2][3][4][5][6][8][9]pasik@iki.fi> > > > wrote: > > > >>> > > > > > > > >>> > > > > On Tue, Mar 16, > 2010 at > > > 03:22:50PM -0700, > > > >>> kishore > > > >>> > kumar > > > >>> > > wrote: > > > >>> > > > > > attached > is the > > log > > > captured in with > > > >>> the word > > > >>> > > document . > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > Scanning logical > > volumes > > > >>> > > > > Reading all > physical > > volumes. > > > This may > > > >>> take a > > > >>> > while... > > > >>> > > > > Activating > logical > > volumes > > > >>> > > > > Volume group > > "VolGroup01" not > > > found > > > >>> > > > > Trying to resume > from > > > >>> /dev/VolGroup01/LogVol01 > > > >>> > > > > Unable to access > resume > > device > > > >>> > (/dev/VolGroup01/LogVol01) > > > >>> > > > > Creating root > device. > > > >>> > > > > Mounting root > > filesystem. > > > >>> > > > > mount: could not > find > > > filesystem '/dev/root' > > > >>> > > > > Setting up other > > filesystems. > > > >>> > > > > Setting up new > root fs > > > >>> > > > > setuproot: > moving /dev > > failed: > > > No such file > > > >>> or > > > >>> > directory > > > >>> > > > > no fstab.sys, > mounting > > > internal defaults > > > >>> > > > > setuproot: error > > mounting > > > /proc: No such > > > >>> file or > > > >>> > directory > > > >>> > > > > setuproot: error > > mounting > > > /sys: No such file > > > >>> or > > > >>> > directory > > > >>> > > > > Switching to new > root > > and > > > running init. > > > >>> > > > > unmounting old > /dev > > > >>> > > > > unmounting old > /proc > > > >>> > > > > unmounting old > /sys > > > >>> > > > > switchroot: > mount > > failed: No > > > such file or > > > >>> directory > > > >>> > > > > init used > greatest > > stack > > > depth: 4088 bytes > > > >>> left > > > >>> > > > > Kernel panic - > not > > syncing: > > > Attempted to > > > >>> kill init! > > > >>> > > > > > > > >>> > > > > So it seems it > gets all > > the > > > way to executing > > > >>> the > > > >>> > initrd > > > >>> > > image, > > > >>> > > > > which then fails > to > > mount the > > > root fs. > > > >>> > > > > > > > >>> > > > > Earlier in the > log: > > > >>> > > > > ata1: SATA link > up 3.0 > > Gbps > > > (SStatus 123 > > > >>> SControl > > > >>> > 300) > > > >>> > > > > ata1.00: ATA-8: > Hitachi > > > HDT721025SLA380, > > > >>> STBOA3AA, > > > >>> > max > > > >>> > > UDMA/133 > > > >>> > > > > ata1.00: > 488397168 > > sectors, > > > multi 0: LBA48 > > > >>> NCQ > > > >>> > (depth > > > >>> > > 31/32), AA > > > >>> > > > > ata1.00: > configured for > > > UDMA/133 > > > >>> > > > > scsi 0:0:0:0: > > Direct-Access > > > ATA > > > >>> Hitachi > > > >>> > HDT72102 > > > >>> > > STBO > > > >>> > > > PQ: 0 > > > >>> > > > > ANSI: 5 > > > >>> > > > > sd 0:0:0:0: > Attached > > scsi > > > generic sg0 type 0 > > > >>> > > > > sd 0:0:0:0: > [sda] > > 488397168 > > > 512-byte logical > > > >>> > blocks: (250 > > > >>> > > GB/232 > > > >>> > > > GiB) > > > >>> > > > > sd 0:0:0:0: > [sda] Write > > > Protect is off > > > >>> > > > > sd 0:0:0:0: > [sda] Mode > > Sense: > > > 00 3a 00 00 > > > >>> > > > > sd 0:0:0:0: > [sda] Write > > cache: > > > enabled, read > > > >>> cache: > > > >>> > > enabled, > > > >>> > > > doesn't > > > >>> > > > > support DPO or > FUA > > > >>> > > > > sda: sda1 sda2 > > > >>> > > > > sd 0:0:0:0: > [sda] > > Attached > > > SCSI disk > > > >>> > > > > > > > >>> > > > > so /dev/sda was > > detected. Is > > > your root lvm > > > >>> volume > > > >>> > on > > > >>> > > /dev/sda ? > > > >>> > > > > Is > > /dev/VolGroup01/LogVol01 > > > really your root > > > >>> fs? > > > >>> > > > > > > > >>> > > > > -- Pasi > > > >>> > > > > > > > >>> > > > > > > > > >>> > > > > > > > > >>> > > > > > On Tue, > Mar 16, > > 2010 at > > > 3:03 PM, Pasi > > > >>> > Kärkkäinen > > > >>> > > > > > > > <[1][2][3][4][5][6][7][9][10]pasik@iki.fi> wrote: > > > >>> > > > > > > > > >>> > > > > > On Tue, > Mar 16, > > 2010 > > > at 02:56:06PM > > > >>> -0700, > > > >>> > kishore > > > >>> > > kumar > > > >>> > > > wrote: > > > >>> > > > > > > > Please > > find the > > > attached log > > > >>> file after > > > >>> > fixing > > > >>> > > the > > > >>> > > > dom 0 > > > >>> > > > > kernel cmd > > > >>> > > > > > line > > > >>> > > > > > > as > below > > > >>> > > > > > > > > > >>> > > > > > > ro > > > root=/dev/VolGroup01/LogVol00 > > > >>> > console=hvc0 > > > >>> > > > > earlyprintk=xen > > > >>> > > > > > > nomodeset > > > >>> > > > > > > > > > >>> > > > > > > > > >>> > > > > > There's > > something > > > wrong with the log, > > > >>> the > > > >>> > dom0 > > > >>> > > kernel > > > >>> > > > parts are > > > >>> > > > > all on > > > >>> > > > > > one > line.. > > > >>> > > > > > It's > really > > difficult > > > to read it. > > > >>> > > > > > > > > >>> > > > > > -- Pasi > > > >>> > > > > > > > > >>> > > > > > > > Thanks > > > >>> > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > On > Tue, > > Mar 16, > > > 2010 at 2:29 PM, > > > >>> Pasi > > > >>> > > Kärkkäinen > > > >>> > > > > > > > > <[1][2][3][4][5][6][7][8][10][11]pasik@iki.fi> > > > >>> wrote: > > > >>> > > > > > > > > > >>> > > > > > > > On Tue, > > Mar > > > 16, 2010 at > > > >>> 02:16:22PM > > > >>> > -0700, > > > >>> > > kishore > > > >>> > > > kumar > > > >>> > > > > wrote: > > > >>> > > > > > > > > I > > did > > > below steps. > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > I > > > pulled DOM 0 kernel > > > >>> from > > > >>> > > > > > > > > > > git > > > clone > > > >>> > > > > > > > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > > > > git://[1][2][3][4][5][6][7][8][9][11][12]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > >>> > > > > > > > > > > > linux-2.6-xen > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > cd > > > linux-2.6-xen > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > make > > > clean > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > cp -a > > > .config .config-old > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > wget -O > > > .config > > > >>> > > > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > > > > [2][3][4][5][6][7][8][9][10][12][13]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > make > > > oldconfig > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > make > > > bzImage > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > make > > > modules > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > make > > > modules_install > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > cp -a > > > .config > > > >>> > /boot/config-2.6.32.9 > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > cp -a > > > System.map > > > >>> > > /boot/System.map-2.6.32.9 > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > cp -a > > > >>> arch/x86/boot/bzImage > > > >>> > > > /boot/vmlinuz-2.6.32.9 > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > and > > > modified the > > > >>> grub.conf as > > > >>> > below > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > > Root(hd0,0) > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > kernel > > > /xen.gz > > > >>> console=vga,com1 > > > >>> > > > com1=115200,8n1 > > > >>> > > > > msi=1 > > > >>> > > > > > iommu=1 > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > module > > > /vmlinuz-2.6.32.9 > > > >>> ro > > > >>> > > > > > > root=/dev/VolGroup01/LogVo100 > > > >>> > > > > > rhgb > > > >>> > > > > > > > quiet > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > module > > > >>> /initrd-2.6.32.9.img > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > and > > > rebooted the machine. > > > >>> Then > > > >>> > It > > > >>> > > booted with > > > >>> > > > some > > > >>> > > > > xen > > > >>> > > > > > messages > > > >>> > > > > > > > and > > > >>> > > > > > > > > > > stopped. > > > Those were the > > > >>> > messages > > > >>> > > captured > > > >>> > > > from > > > >>> > > > > serial > > > >>> > > > > > console. > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > Please > > > let me know if I > > > >>> did > > > >>> > something > > > >>> > > wrong > > > >>> > > > here. > > > >>> > > > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > > Please > > fix the > > > kernel cmdline > > > >>> based > > > >>> > on my > > > >>> > > earlier > > > >>> > > > email, > > > >>> > > > > and > > > >>> > > > > > capture > and > > > >>> > > > > > > > post > > the > > > >>> > > > > > > > serial > > console > > > log again! > > > >>> > > > > > > > > > >>> > > > > > > > -- Pasi > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > On Tue, > > > Mar 16, 2010 at > > > >>> 1:20 PM, > > > >>> > Pasi > > > >>> > > > Kärkkäinen > > > >>> > > > > > > > > > >>> > <[3][4][5][6][7][8][9][10][11][13][14]pasik@iki.fi> > > > >>> > wrote: > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > On > > > Tue, Mar 16, 2010 at > > > >>> > 01:16:28PM > > > >>> > > -0700, > > > >>> > > > Jeremy > > > >>> > > > > > > Fitzhardinge > > > >>> > > > > > > > wrote: > > > >>> > > > > > > > > > > > On > > > 03/16/2010 12:48 > > > >>> PM, Pasi > > > >>> > > Kärkkäinen > > > >>> > > > wrote: > > > >>> > > > > > > > > > > >> On > > > Tue, Mar 16, 2010 > > > >>> at > > > >>> > 09:43:44PM > > > >>> > > +0200, > > > >>> > > > Pasi > > > >>> > > > > > > Kärkkäinen > > > >>> > > > > > > > wrote: > > > >>> > > > > > > > > > > >> > > > >>> > > > > > > > > > > >>> > > > On Tue, Mar 16, > > > >>> 2010 at > > > >>> > > 10:32:17AM > > > >>> > > > -0700, > > > >>> > > > > kishore > > > >>> > > > > > kumar > > > >>> > > > > > > > wrote: > > > >>> > > > > > > > > > > >>> > > > >>> > > > > > > > > > > >>>> > > > Attached is > > > >>> the > > > >>> > output > > > >>> > > captured > > > >>> > > > from > > > >>> > > > > serial > > > >>> > > > > > console. > > > >>> > > > > > > > > > > >>>> > > > >>> > > > > > > > > > > >>>> > > > Machine does > > > >>> not boot > > > >>> > after > > > >>> > > > compiling xen > > > >>> > > > > 3.4.3 > > > >>> > > > > > with > > > >>> > > > > > > > pv_ops > > dom > > > >>> > > > > > > > > > > 0 > > > kernel. > > > >>> > > > > > > > > > > >>>> > > > >>> > > > > > > > > > > >>>> > > > Please let me > > > >>> know > > > >>> > what is > > > >>> > > going > > > >>> > > > wrong > > > >>> > > > > here. > > > >>> > > > > > > > > > > >>>> > > > >>> > > > > > > > > > > >>>> > > > >>> > > > > > > > > > > >>> > > > Ok this looks like > > > >>> a bug > > > >>> > that is > > > >>> > > already > > > >>> > > > being > > > >>> > > > > sorted > > > >>> > > > > > out on > > > >>> > > > > > > > > > > > xen-devel mailinglist. > > > >>> > > > > > > > > > > >>> I > > > added CC to > > > >>> xen-devel. > > > >>> > > > > > > > > > > >>> > > > >>> > > > > > > > > > > >>> > > > >>> > > > > > > > > > > >> > > > >>> > > > > > > > > > > > > > > >>> > > > > > > > > > > > > > > Those messages are > > > >>> not a > > > >>> > problem in > > > >>> > > > themselves, > > > >>> > > > > but the > > > >>> > > > > > related > > > >>> > > > > > > > > > > > problem > > > >>> > > > > > > > > > > > is > > > believed to be > > > >>> fixed in > > > >>> > current > > > >>> > > > > > xen/stable-2.6.32.x. > > > >>> > > > > > It > > > >>> > > > > > > > looks > > like > > > >>> > > > > > > > > > > > the > > > output stops > > > >>> there > > > >>> > because the > > > >>> > > Xen > > > >>> > > > console > > > >>> > > > > isn't set > > > >>> > > > > > up > > > >>> > > > > > > > > properly > > > >>> > > > > > > > > > > for > > > >>> > > > > > > > > > > > > > > some reason. > > > >>> > > > > > > > > > > > > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > Yeah, > > > remove "rhgb > > > >>> quiet" from > > > >>> > the > > > >>> > > options.. > > > >>> > > > the > > > >>> > > > > dom0 > > > >>> > > > > > kernel > > > >>> > > > > > > > cmdline > > > >>> > > > > > > > > > > should > > > be like this: > > > >>> > > > > > > > > > > ro > > > >>> > root=/dev/VolGroup01/LogVol00 > > > >>> > > > console=hvc0 > > > >>> > > > > > > earlyprintk=xen > > > >>> > > > > > > > > nomodeset > > > >>> > > > > > > > > > > -- > > > Pasi > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > References > > > >>> > > > > > > > > > > > >>> > > > > > > > > > > Visible > > > links > > > >>> > > > > > > > > > > 1. > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > > > > [5][6][7][8][9][10][11][12][14][15]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > >>> > > > > > > > > > > 2. > > > >>> > > > > > > > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > > > > [6][7][8][9][10][11][12][13][15][16]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > >>> > > > > > > > > > > 3. > > > >>> > > > mailto:[7][8][9][10][11][12][13][14][16][17]pasik@iki.fi > > > >>> > > > > > > > > > >>> > > > > > > > References > > > >>> > > > > > > > > > >>> > > > > > > > Visible > > links > > > >>> > > > > > > 1. > > > >>> > > > mailto:[9][10][11][12][13][14][15][17][18]pasik@iki.fi > > > >>> > > > > > > 2. > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > > > > [10][11][12][13][14][15][16][18][19]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > >>> > > > > > > 3. > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > > > > [11][12][13][14][15][16][17][19][20]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > >>> > > > > > > 4. > > > >>> > > > mailto:[12][13][14][15][16][17][18][20][21]pasik@iki.fi > > > >>> > > > > > > 5. > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > > > > [13][14][15][16][17][18][19][21][22]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > >>> > > > > > > 6. > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > > > > [14][15][16][17][18][19][20][22][23]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > >>> > > > > > > 7. > > > >>> > > > mailto:[15][16][17][18][19][20][21][23][24]pasik@iki.fi > > > >>> > > > > > > > Asserting > > Post > > > complete GPIO!!! > > > >>> > > > > > > > Transfer > > control to > > > CSM 16-bit > > > >>> binary for > > > >>> > legacy > > > >>> > > boot > > > >>> > > > > > > __ > __ > > > _____ _ _ > > > >>> _____ > > > >>> > > _ _ > > > >>> > > > > > > \ \/ > /___ _ > > __ > > > |___ /| || | > > > >>> |___ / > > > >>> > _ __ > > > >>> > > ___| || | > > > >>> > > > _ > > > >>> > > > > __ _ > > > >>> > > > > > __ ___ > > > >>> > > > > > > \ > // _ \ > > '_ \ > > > |_ \| || |_ > > > >>> |_ \ __| > > > >>> > '__/ > > > >>> > > __| || > > > >>> > > > |_ __| > > > >>> > > > > '_ \| > > > >>> > > > > > '__/ _ \ > > > >>> > > > > > > / > \ __/ > > | | | > > > ___) |__ _| > > > >>> ___) |__| > > > >>> > | | > > > >>> > > (__|__ > > > >>> > > > _|__| > > > >>> > > > > |_) | | > > > >>> > > > > > | __/ > > > >>> > > > > > > > > /_/\_\___|_| |_| > > > |____(_) > > > >>> |_|(_)____/ > > > >>> > |_| > > > >>> > > \___| |_| > > > >>> > > > | > > > >>> > > > > .__/|_| > > > >>> > > > > > \___| > > > >>> > > > > > > > > > >>> > > > |_| > > > >>> > > > > > > (XEN) > Xen > > version > > > 3.4.3-rc4-pre > > > >>> > > (kishore@localdomain) > > > >>> > > > (gcc > > > >>> > > > > version > > > >>> > > > > > 4.1.2 > 20080704 > > (Red > > > Hat 4.1.2-46)) > > > >>> Mon Mar > > > >>> > 15 > > > >>> > > 13:44:31 PDT > > > >>> > > > 2010 > > > >>> > > > > > > (XEN) > Latest > > > ChangeSet: Tue Mar 09 > > > >>> > 18:15:52 2010 > > > >>> > > +0000 > > > >>> > > > > > > > 19924:6e72f8c3c017 > > > >>> > > > > > > (XEN) > > Command line: > > > >>> console=vga,com1 > > > >>> > > com1=115200,8n1 > > > >>> > > > msi=1 > > > >>> > > > > iommu=1 > > > >>> > > > > > > (XEN) > Video > > > information: > > > >>> > > > > > > (XEN) > VGA > > is text > > > mode 80x25, font > > > >>> 8x16 > > > >>> > > > > > > (XEN) > > VBE/DDC > > > methods: none; EDID > > > >>> > transfer time: > > > >>> > > 0 > > > >>> > > > seconds > > > >>> > > > > > > (XEN) > EDID > > info > > > not retrieved > > > >>> because no > > > >>> > DDC > > > >>> > > retrieval > > > >>> > > > method > > > >>> > > > > > detected > > > >>> > > > > > > (XEN) > Disc > > > information: > > > >>> > > > > > > (XEN) > Found > > 1 MBR > > > signatures > > > >>> > > > > > > (XEN) > Found > > 1 EDD > > > information > > > >>> structures > > > >>> > > > > > > (XEN) > > Xen-e820 RAM > > > map: > > > >>> > > > > > > (XEN) > > > 0000000000000000 - > > > >>> 000000000009d000 > > > >>> > > (usable) > > > >>> > > > > > > (XEN) > > > 000000000009d000 - > > > >>> 00000000000a0000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > > > 00000000000e0000 - > > > >>> 0000000000100000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > > > 0000000000100000 - > > > >>> 000000006d597000 > > > >>> > > (usable) > > > >>> > > > > > > (XEN) > > > 000000006d597000 - > > > >>> 000000006d686000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > > > 000000006d686000 - > > > >>> 000000006f598000 > > > >>> > > (usable) > > > >>> > > > > > > (XEN) > > > 000000006f598000 - > > > >>> 000000006f59a000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > > > 000000006f59a000 - > > > >>> 000000006f5af000 > > > >>> > (ACPI > > > >>> > > NVS) > > > >>> > > > > > > (XEN) > > > 000000006f5af000 - > > > >>> 000000006f5d9000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > > > 000000006f5d9000 - > > > >>> 000000006f5f9000 > > > >>> > (ACPI > > > >>> > > data) > > > >>> > > > > > > (XEN) > > > 000000006f5f9000 - > > > >>> 000000006f6df000 > > > >>> > (ACPI > > > >>> > > NVS) > > > >>> > > > > > > (XEN) > > > 000000006f6df000 - > > > >>> 000000006f700000 > > > >>> > (ACPI > > > >>> > > data) > > > >>> > > > > > > (XEN) > > > 000000006f700000 - > > > >>> 0000000080000000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > > > 00000000a0000000 - > > > >>> 00000000b0000000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > > > 00000000fc000000 - > > > >>> 00000000fd000000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > > > 00000000fed1c000 - > > > >>> 00000000fed20000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > > > 00000000ffc00000 - > > > >>> 0000000100000000 > > > >>> > > (reserved) > > > >>> > > > > > > (XEN) > System > > RAM: > > > 1780MB > > > >>> (1823000kB) > > > >>> > > > > > > (XEN) > ACPI: > > RSDP > > > 000F03F0, 0024 (r2 > > > >>> INTEL > > > >>> > ) > > > >>> > > > > > > (XEN) > ACPI: > > XSDT > > > 6F6FE120, 0064 (r1 > > > >>> INTEL > > > >>> > THRLY > > > >>> > > > 0 > > > >>> > > > > > 1000013) > > > >>> > > > > > > (XEN) > ACPI: > > FACP > > > 6F6FD000, 00F4 (r4 > > > >>> INTEL > > > >>> > THRLY > > > >>> > > > 0 > > > >>> > > > > MSFT > > > >>> > > > > > > 100000D) > > > >>> > > > > > > (XEN) > ACPI: > > DSDT > > > 6F6F5000, 74F1 (r2 > > > >>> INTEL > > > >>> > THRLY > > > >>> > > > 3 > > > >>> > > > > MSFT > > > >>> > > > > > > 100000D) > > > >>> > > > > > > (XEN) > ACPI: > > FACS > > > 6F5F9000, 0040 > > > >>> > > > > > > (XEN) > ACPI: > > APIC > > > 6F6F4000, 01CC (r2 > > > >>> INTEL > > > >>> > THRLY > > > >>> > > > 0 > > > >>> > > > > MSFT > > > >>> > > > > > > 100000D) > > > >>> > > > > > > (XEN) > ACPI: > > MCFG > > > 6F6F3000, 003C (r1 > > > >>> INTEL > > > >>> > THRLY > > > >>> > > > 1 > > > >>> > > > > MSFT > > > >>> > > > > > > 100000D) > > > >>> > > > > > > (XEN) > ACPI: > > HPET > > > 6F6F2000, 0038 (r1 > > > >>> INTEL > > > >>> > THRLY > > > >>> > > > 1 > > > >>> > > > > MSFT > > > >>> > > > > > > 100000D) > > > >>> > > > > > > (XEN) > ACPI: > > SLIT > > > 6F6F1000, 0030 (r1 > > > >>> INTEL > > > >>> > THRLY > > > >>> > > > 1 > > > >>> > > > > MSFT > > > >>> > > > > > > 100000D) > > > >>> > > > > > > (XEN) > ACPI: > > WDDT > > > 6F6F0000, 0040 (r1 > > > >>> INTEL > > > >>> > THRLY > > > >>> > > > 0 > > > >>> > > > > MSFT > > > >>> > > > > > > 100000D) > > > >>> > > > > > > (XEN) > ACPI: > > SSDT > > > 6F5D9000, 1FDDC > > > >>> (r1 > > > >>> > INTEL SSDT > > > >>> > > PM > > > >>> > > > 4000 > > > >>> > > > > INTL > > > >>> > > > > > > 20061109) > > > >>> > > > > > > (XEN) > ACPI: > > DMAR > > > 6F6EE000, 01D0 (r1 > > > >>> INTEL > > > > References > > Visible links > 1. mailto:pasik@iki.fi > 2. mailto:pasik@iki.fi > 3. http://wiki.xensource.com/xenwiki/XenParavirtOps > 4. mailto:pasik@iki.fi > 5. mailto:pasik@iki.fi > 6. mailto:pasik@iki.fi > 7. mailto:pasik@iki.fi > 8. mailto:pasik@iki.fi > 9. mailto:pasik@iki.fi > 10. mailto:pasik@iki.fi > 11. mailto:pasik@iki.fi > 12. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 13. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 14. mailto:pasik@iki.fi > 15. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 16. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 17. mailto:pasik@iki.fi > 18. mailto:pasik@iki.fi > 19. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 20. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 21. mailto:pasik@iki.fi > 22. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 23. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 24. mailto:pasik@iki.fi ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs() 2010-03-19 17:59 ` [Xen-devel] Re: pvops dom0 kernel: crash in print_all_ICs() Pasi Kärkkäinen 2010-03-19 18:22 ` Re: [Xen-users] " Jeremy Fitzhardinge @ 2010-03-19 20:07 ` Konrad Rzeszutek Wilk 2010-03-19 20:45 ` [Xen-devel] " Pasi Kärkkäinen 1 sibling, 1 reply; 32+ messages in thread From: Konrad Rzeszutek Wilk @ 2010-03-19 20:07 UTC (permalink / raw) To: Pasi Kärkkäinen Cc: Jeremy Fitzhardinge, xen-devel, xen-users, kishore kumar On Fri, Mar 19, 2010 at 07:59:00PM +0200, Pasi Kärkkäinen wrote: > On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar wrote: > > Attached is the capture log after changing the grub.conf to > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset > > initcall_debug debug swiotlb=force apic=debug loglevel=10 > > > > for the dom 0 kernel command line. > > > > Hmm, interesting. Now it seems to crash in a different place. > > Jeremy: Have you seen this one earlier? Yeah. I've seen it. This bug disappears once the IOAPIC reads are in place, but that won't happen yet. I think it makes sense to remove the 'apic=debug' from the kernel command line (thought keep it in Xen command line) for debug purposes until this gets sorted out. ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Xen-devel] Re: pvops dom0 kernel: crash in print_all_ICs() 2010-03-19 20:07 ` Konrad Rzeszutek Wilk @ 2010-03-19 20:45 ` Pasi Kärkkäinen 0 siblings, 0 replies; 32+ messages in thread From: Pasi Kärkkäinen @ 2010-03-19 20:45 UTC (permalink / raw) To: Konrad Rzeszutek Wilk Cc: Jeremy Fitzhardinge, xen-devel, xen-users, kishore kumar On Fri, Mar 19, 2010 at 04:07:39PM -0400, Konrad Rzeszutek Wilk wrote: > On Fri, Mar 19, 2010 at 07:59:00PM +0200, Pasi Kärkkäinen wrote: > > On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar wrote: > > > Attached is the capture log after changing the grub.conf to > > > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset > > > initcall_debug debug swiotlb=force apic=debug loglevel=10 > > > > > > for the dom 0 kernel command line. > > > > > > > Hmm, interesting. Now it seems to crash in a different place. > > > > Jeremy: Have you seen this one earlier? > > Yeah. I've seen it. This bug disappears once the IOAPIC reads are in > place, but that won't happen yet. > > I think it makes sense to remove the 'apic=debug' from the kernel > command line (thought keep it in Xen command line) for debug purposes > until this gets sorted out. > Yeah, I just fixed the XenParavirtOps wiki page and removed apic=debug from the dom0 kernel cmdline. Btw should I add any acpi related debug options there? -- Pasi ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-18 21:27 ` Pasi Kärkkäinen 2010-03-18 23:56 ` kishore kumar @ 2010-03-23 15:23 ` Tobias Geiger 2010-03-23 17:00 ` Jeremy Fitzhardinge 1 sibling, 1 reply; 32+ messages in thread From: Tobias Geiger @ 2010-03-23 15:23 UTC (permalink / raw) To: xen-devel; +Cc: Jeremy Fitzhardinge, kishore kumar, xen-users Hi, after having almost no issues with hiccups anymore (HPET was disabled in BIOS - my fault) i also notices the GSI ERRORs regarding GSI 2 and 9 in my dmesg xen dmesg: http://pastebin.ca/1850372 dom0 dmesg: http://pastebin.ca/1850373 is this somehow related with the fact that "xenpm get-cpufreq-states" results in no output at all, and "xenpm set-scaling-governor ondemand" results in: [CPU0] failed to set governor name [CPU1] failed to set governor name [CPU2] failed to set governor name [CPU3] failed to set governor name [CPU4] failed to set governor name [CPU5] failed to set governor name [CPU6] failed to set governor name [CPU7] failed to set governor name - i know this (cpufreq) already worked with a 2.6.33 "xenified" dom0-Kernel... Greetings Tobias Am Donnerstag 18 März 2010 22:27:00 schrieb Pasi Kärkkäinen: > On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar wrote: > > pvdisplay does not work in my RHEL machine. > > > > I did pvscan. > > below is the output. > > > > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free] > > > > Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no VG: 0 [0 ] > > Ok so /dev/sda2 is the correct device holding the VolGroup01. > > Looking at your latest capture.doc I see this: > > Command line: ro root=/dev/vg00/lv01 console=hvc0 earlyprintk=xen > nomodeset initcall_debug debug swiotlb=force apic=debug loglevel=10 > > So your root= parameter is wrong! Edit grub.conf and replace it with the > actual root device: root=/dev/VolGroup01/LogVol00 > > -- Pasi > > > On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen <[1]pasik@iki.fi> > > wrote: > > > > On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore kumar wrote: > > > I did the below steps for pvops dom 0 kernel. > > > > > > make menuconfig > > > make bzImage > > > make modules > > > make modules_install > > > cp -a .config /boot/config-2.6.32.10 > > > cp -a System.map /boot/System.map-2.6.32.10 > > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10 > > > /sbin/mkinitrd -f --builtin=ahci /boot/initrd-2.6.32.10.img > > > > 2.6.32.10 > > > > > I tried root=/dev/VolGroup01/LogVol00 . > > > > Ok. > > > > Please run "pvdisplay" to see which actual partition is the LVM PV > > for your > > volume group. > > > > Also if you're running Fedora 12 you could try generating an initrd > > image > > with dracut instead of mkinitrd. > > > > -- Pasi > > > > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen > > > > <[1][2]pasik@iki.fi> wrote: > > > On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore kumar wrote: > > > > Here is the output of df -h and cat /etc/fstab of my > > > > machine. > > > > > Did you try both root=/dev/mapper/VolGroup01-LogVol00 and > > > root=/dev/VolGroup01/LogVol00 arguments for the dom0 kernel? > > > > > > How did you generate the initrd image for the dom0 kernel? > > > > > > Anyway this sounds like a grub.conf or initrd problem, not > > > Xen or > > > > pvops > > > > > dom0 kernel kernel problem. > > > > > > -- Pasi > > > > > > > Please let me know your thoughts. > > > > > > > > [root@localhost kishore]# df -h > > > > > > > > Filesystem Size Used Avail Use% Mounted on > > > > > > > > /dev/mapper/VolGroup01-LogVol00 > > > > > > > > 223G 29G 182G 14% / > > > > > > > > /dev/sda1 99M 81M 13M 87% /boot > > > > > > > > tmpfs 757M 0 757M 0% /dev/shm > > > > > > > > [root@localhost kishore]# cat /etc/fstab > > > > > > > > /dev/VolGroup01/LogVol00 / ext3 defaults 1 1 > > > > > > > > LABEL=/boot /boot ext3 defaults 1 2 > > > > > > > > tmpfs /dev/shm tmpfs defaults 0 0 > > > > > > > > devpts /dev/pts devpts gid=5,mode=620 0 0 > > > > > > > > sysfs /sys sysfs defaults 0 0 > > > > > > > > proc /proc proc defaults 0 0 > > > > > > > > /dev/VolGroup01/LogVol01 swap swap defaults 0 0 > > > > > > > > [root@localhost kishore]# > > > > > > > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen > > > > > > <[1][2][3]pasik@iki.fi> wrote: > > > > On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore > > > > kumar > > > > wrote: > > > > > I am not sure. Can you please let me know how to > > > > check > > > > > this? any > > > > > > > command > > > > > > > > > ?? > > > > > > > > well simple "df -h" will show it. and also "cat > > > > /etc/fstab". > > > > > > You can also check it from your grub configuration.. > > > > from > > > > the > > > > > working > > > > > > > baremetal (non-Xen) entry. > > > > > > > > -- Pasi > > > > > > > > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi Kärkkäinen > > > > > > > > <[1][2][3][4]pasik@iki.fi> wrote: > > > > > On Tue, Mar 16, 2010 at 03:22:50PM -0700, > > > > > kishore > > > > kumar > > > > > wrote: > > > > > > attached is the log captured in with the > > > > > > word > > > > > > document . > > > > > > > > Scanning logical volumes > > > > > Reading all physical volumes. This may take a > > > > while... > > > > > > > Activating logical volumes > > > > > Volume group "VolGroup01" not found > > > > > Trying to resume from /dev/VolGroup01/LogVol01 > > > > > Unable to access resume device > > > > (/dev/VolGroup01/LogVol01) > > > > > > > Creating root device. > > > > > Mounting root filesystem. > > > > > mount: could not find filesystem '/dev/root' > > > > > Setting up other filesystems. > > > > > Setting up new root fs > > > > > setuproot: moving /dev failed: No such file or > > > > directory > > > > > > > no fstab.sys, mounting internal defaults > > > > > setuproot: error mounting /proc: No such file > > > > > or > > > > directory > > > > > > > setuproot: error mounting /sys: No such file or > > > > directory > > > > > > > Switching to new root and running init. > > > > > unmounting old /dev > > > > > unmounting old /proc > > > > > unmounting old /sys > > > > > switchroot: mount failed: No such file or > > > > > directory init used greatest stack depth: 4088 bytes > > > > > left Kernel panic - not syncing: Attempted to kill > > > > > init! > > > > > > > > > > So it seems it gets all the way to executing > > > > > the > > > > initrd > > > > > image, > > > > > > > > which then fails to mount the root fs. > > > > > > > > > > Earlier in the log: > > > > > ata1: SATA link up 3.0 Gbps (SStatus 123 > > > > > SControl > > > > 300) > > > > > > > ata1.00: ATA-8: Hitachi HDT721025SLA380, > > > > > STBOA3AA, > > > > max > > > > > UDMA/133 > > > > > > > > ata1.00: 488397168 sectors, multi 0: LBA48 NCQ > > > > (depth > > > > > 31/32), AA > > > > > > > > ata1.00: configured for UDMA/133 > > > > > scsi 0:0:0:0: Direct-Access ATA > > > > > Hitachi > > > > HDT72102 > > > > > STBO > > > > > > > PQ: 0 > > > > > > > > > ANSI: 5 > > > > > sd 0:0:0:0: Attached scsi generic sg0 type 0 > > > > > sd 0:0:0:0: [sda] 488397168 512-byte logical > > > > blocks: (250 > > > > > GB/232 > > > > > > > GiB) > > > > > > > > > sd 0:0:0:0: [sda] Write Protect is off > > > > > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > > > > sd 0:0:0:0: [sda] Write cache: enabled, read > > > > > cache: > > > > > > enabled, > > > > > > > doesn't > > > > > > > > > support DPO or FUA > > > > > sda: sda1 sda2 > > > > > sd 0:0:0:0: [sda] Attached SCSI disk > > > > > > > > > > so /dev/sda was detected. Is your root lvm > > > > > volume > > > > on > > > > > /dev/sda ? > > > > > > > > Is /dev/VolGroup01/LogVol01 really your root > > > > > fs? > > > > > > > > > > -- Pasi > > > > > > > > > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi > > > > Kärkkäinen > > > > > > > <[1][2][3][4][5]pasik@iki.fi> wrote: > > > > > > On Tue, Mar 16, 2010 at 02:56:06PM > > > > > > -0700, > > > > kishore > > > > > kumar > > > > > > > wrote: > > > > > > > Please find the attached log file > > > > > > > after > > > > fixing > > > > > the > > > > > > > dom 0 > > > > > > > > > kernel cmd > > > > > > > > > > > line > > > > > > > > > > > > > as below > > > > > > > > > > > > > > ro root=/dev/VolGroup01/LogVol00 > > > > console=hvc0 > > > > > > > earlyprintk=xen > > > > > > > > > > > nomodeset > > > > > > > > > > > > > > > > > > There's something wrong with the log, > > > > > > the > > > > dom0 > > > > > kernel > > > > > > > parts are > > > > > > > > > all on > > > > > > > > > > > one line.. > > > > > > It's really difficult to read it. > > > > > > > > > > > > -- Pasi > > > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 2:29 PM, > > > > > > > Pasi > > > > > > Kärkkäinen > > > > > > > > > <[1][2][3][4][5][6]pasik@iki.fi> wrote: > > > > > > > On Tue, Mar 16, 2010 at > > > > > > > 02:16:22PM > > > > -0700, > > > > > kishore > > > > > > > kumar > > > > > > > > > wrote: > > > > > > > > I did below steps. > > > > > > > > > > > > > > > > > > > > > > > > I pulled DOM 0 kernel from > > > > > > > > git clone > > > > > > git://[1][2][3][4][5][6][7]git.kernel.org/pub/scm/linux/kernel/git/jeremy > >/xen.git > > > > > > > > > > linux-2.6-xen > > > > > > > > > > > > > > > > cd linux-2.6-xen > > > > > > > > > > > > > > > > make clean > > > > > > > > > > > > > > > > cp -a .config .config-old > > > > > > > > > > > > > > > > wget -O .config > > > > > > [2][3][4][5][6][7][8]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/confi > >g-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > > > make oldconfig > > > > > > > > > > > > > > > > make bzImage > > > > > > > > > > > > > > > > make modules > > > > > > > > > > > > > > > > make modules_install > > > > > > > > > > > > > > > > cp -a .config > > > > /boot/config-2.6.32.9 > > > > > > > > > > cp -a System.map > > > > > > /boot/System.map-2.6.32.9 > > > > > > > > > > > cp -a arch/x86/boot/bzImage > > > > > > > > /boot/vmlinuz-2.6.32.9 > > > > > > > > > > > > and modified the grub.conf > > > > > > > > as > > > > below > > > > > > > > > > Root(hd0,0) > > > > > > > > > > > > > > > > kernel /xen.gz > > > > > > > > console=vga,com1 > > > > > > > > com1=115200,8n1 > > > > > > > > > msi=1 > > > > > > > > > > > iommu=1 > > > > > > > > > > > > > > module /vmlinuz-2.6.32.9 ro > > > > > > > > > > root=/dev/VolGroup01/LogVo100 > > > > > > > > > > > rhgb > > > > > > > > > > > > > quiet > > > > > > > > > > > > > > > module /initrd-2.6.32.9.img > > > > > > > > > > > > > > > > > > > > > > > > and rebooted the machine. > > > > > > > > Then > > > > It > > > > > booted with > > > > > > > some > > > > > > > > > xen > > > > > > > > > > > messages > > > > > > > > > > > > > and > > > > > > > > > > > > > > > stopped. Those were the > > > > messages > > > > > captured > > > > > > > from > > > > > > > > > serial > > > > > > > > > > > console. > > > > > > > > > > > > > > Please let me know if I did > > > > something > > > > > wrong > > > > > > > here. > > > > > > > > > > > Please fix the kernel cmdline > > > > > > > based > > > > on my > > > > > earlier > > > > > > > email, > > > > > > > > > and > > > > > > > > > > > capture and > > > > > > > > > > > > > post the > > > > > > > serial console log again! > > > > > > > > > > > > > > -- Pasi > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 1:20 > > > > > > > > PM, > > > > Pasi > > > > > > Kärkkäinen > > > > > > > > > > > > > > > > > > <[3][4][5][6][7][8][9]pasik@iki.fi> > > > > wrote: > > > > > > > > On Tue, Mar 16, 2010 at > > > > 01:16:28PM > > > > > -0700, > > > > > > > Jeremy > > > > > > > > > > Fitzhardinge > > > > > > > > > > > > > wrote: > > > > > > > > > On 03/16/2010 12:48 PM, > > > > > > > > > Pasi > > > > > > Kärkkäinen > > > > > > > wrote: > > > > > > > > >> On Tue, Mar 16, 2010 at > > > > 09:43:44PM > > > > > +0200, > > > > > > > Pasi > > > > > > > > > > Kärkkäinen > > > > > > > > > > > > > wrote: > > > > > > > > >>> On Tue, Mar 16, 2010 > > > > > > > > >>> at > > > > > > 10:32:17AM > > > > > > > -0700, > > > > > > > > > kishore > > > > > > > > > > > kumar > > > > > > > > > > > > > wrote: > > > > > > > > >>>> Attached is the > > > > output > > > > > captured > > > > > > > from > > > > > > > > > serial > > > > > > > > > > > console. > > > > > > > > > > > > > > >>>> Machine does not > > > > > > > > >>>> boot > > > > after > > > > > > compiling xen > > > > > > > > > 3.4.3 > > > > > > > > > > > with > > > > > > > > > > > > > pv_ops dom > > > > > > > > > > > > > > > 0 kernel. > > > > > > > > > > > > > > > > >>>> Please let me > > > > > > > > >>>> know > > > > what is > > > > > going > > > > > > > wrong > > > > > > > > > here. > > > > > > > > > > > > > >>> Ok this looks like a > > > > > > > > >>> bug > > > > that is > > > > > already > > > > > > > being > > > > > > > > > sorted > > > > > > > > > > > out on > > > > > > > > > > > > > > xen-devel mailinglist. > > > > > > > > > > > > > > > > >>> I added CC to > > > > > > > > >>> xen-devel. > > > > > > > > > > > > > > > > > > Those messages are not a > > > > problem in > > > > > > themselves, > > > > > > > > > but the > > > > > > > > > > > related > > > > > > > > > > > > > > problem > > > > > > > > > > > > > > > > > is believed to be fixed > > > > > > > > > in > > > > current > > > > > > > xen/stable-2.6.32.x. > > > > > > > > > > > It > > > > > > > > > > > > > looks like > > > > > > > > > > > > > > > > the output stops there > > > > because the > > > > > Xen > > > > > > > console > > > > > > > > > isn't set > > > > > > > > > > > up > > > > > > > > > > > > > properly > > > > > > > > > > > > > > > for > > > > > > > > > > > > > > > > > some reason. > > > > > > > > > > > > > > > > Yeah, remove "rhgb quiet" > > > > > > > > from > > > > the > > > > > options.. > > > > > > > the > > > > > > > > > dom0 > > > > > > > > > > > kernel > > > > > > > > > > > > > cmdline > > > > > > > > > > > > > > > should be like this: > > > > > > > > ro > > > > root=/dev/VolGroup01/LogVol00 > > > > > > console=hvc0 > > > > > > > > > > earlyprintk=xen > > > > > > > > > > > > > nomodeset > > > > > > > > > > > > > > > -- Pasi > > > > > > > > > > > > > > > > References > > > > > > > > > > > > > > > > Visible links > > > > > > > > 1. > > > > > > [5][6][7][8][9][10]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/ > >xen.git > > > > > > > > > > 2. > > > > > > [6][7][8][9][10][11]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config > >-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > > > 3. > > > > mailto:[7][8][9][10][11][12]pasik@iki.fi > > > > > > > > > References > > > > > > > > > > > > > > Visible links > > > > > > > 1. > > > > mailto:[9][10][11][12][13]pasik@iki.fi > > > > > > > > > 2. > > > > > > [10][11][12][13][14]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy > >/xen.git > > > > > > > > > 3. > > > > > > [11][12][13][14][15]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config > >-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > > 4. > > > > mailto:[12][13][14][15][16]pasik@iki.fi > > > > > > > > > 5. > > > > > > [13][14][15][16][17]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy > >/xen.git > > > > > > > > > 6. > > > > > > [14][15][16][17][18]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config > >-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > > 7. > > > > mailto:[15][16][17][18][19]pasik@iki.fi > > > > > > > > > Asserting Post complete GPIO!!! > > > > > > > Transfer control to CSM 16-bit binary > > > > > > > for > > > > legacy > > > > > boot > > > > > > > > > > __ __ _____ _ _ _____ > > > > > > _ _ > > > > > > > > > > \ \/ /___ _ __ |___ /| || | |___ / > > > > _ __ > > > > > ___| || | > > > > > > > _ > > > > > > > > > __ _ > > > > > > > > > > > __ ___ > > > > > > > > > > > > > \ // _ \ '_ \ |_ \| || |_ |_ \ > > > > > > > __| > > > > '__/ > > > > > __| || > > > > > > > |_ __| > > > > | > > > > > '_ \| > > > > > > > > > > > '__/ _ \ > > > > > > > > > > > > > / \ __/ | | | ___) |__ _| ___) > > > > > > > |__| > > > > > > (__|__ > > > > > > > _|__| > > > > > > > > > |_) | | > > > > > | > > > > > > | __/ > > > > > > | > > > > > > > /_/\_\___|_| |_| |____(_) |_|(_)____/ > > | > > |_| > > | > > > \___| |_| > > > > > > > > .__/|_| > > > > > > > > > > > \___| > > > > | > > > > |_| > > > > | > > > > > > > (XEN) Xen version 3.4.3-rc4-pre > > > > > > (kishore@localdomain) > > > > > > > (gcc > > > > > > > > > version > > > > > > > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon > > > > > > Mar > > > > 15 > > > > > 13:44:31 PDT > > > > > > > 2010 > > > > > > > > > > > (XEN) Latest ChangeSet: Tue Mar 09 > > > > 18:15:52 2010 > > > > > +0000 > > > > > > > > > 19924:6e72f8c3c017 > > > > > > > > > > > > > (XEN) Command line: console=vga,com1 > > > > > > com1=115200,8n1 > > > > > > > msi=1 > > > > > > > > > iommu=1 > > > > > > > > > > > > (XEN) Video information: > > > > > > > (XEN) VGA is text mode 80x25, font > > > > > > > 8x16 (XEN) VBE/DDC methods: none; > > > > > > > EDID > > > > transfer time: > > > 0 > > > > > > > seconds > > > > > > > > > > > (XEN) EDID info not retrieved because > > > > > > > no > > > > DDC > > > > > retrieval > > > > > > > method > > > > > > > > > > detected > > > > > > > > > > > > > (XEN) Disc information: > > > > > > > (XEN) Found 1 MBR signatures > > > > > > > (XEN) Found 1 EDD information > > > > > > > structures (XEN) Xen-e820 RAM map: > > > > > > > (XEN) 0000000000000000 - > > > > > > > 000000000009d000 > > > > > > (usable) > > > > > > > > > > (XEN) 000000000009d000 - > > > > > > > 00000000000a0000 > > > > > > (reserved) > > > > > > > > > > (XEN) 00000000000e0000 - > > > > > > > 0000000000100000 > > > > > > (reserved) > > > > > > > > > > (XEN) 0000000000100000 - > > > > > > > 000000006d597000 > > > > > > (usable) > > > > > > > > > > (XEN) 000000006d597000 - > > > > > > > 000000006d686000 > > > > > > (reserved) > > > > > > > > > > (XEN) 000000006d686000 - > > > > > > > 000000006f598000 > > > > > > (usable) > > > > > > > > > > (XEN) 000000006f598000 - > > > > > > > 000000006f59a000 > > > > > > (reserved) > > > > > > > > > > (XEN) 000000006f59a000 - > > > > > > > 000000006f5af000 > > > > (ACPI > > > > > NVS) > > > > > > > > > > (XEN) 000000006f5af000 - > > > > > > > 000000006f5d9000 > > > > > > (reserved) > > > > > > > > > > (XEN) 000000006f5d9000 - > > > > > > > 000000006f5f9000 > > > > (ACPI > > > > > data) > > > > > > > > > > (XEN) 000000006f5f9000 - > > > > > > > 000000006f6df000 > > > > (ACPI > > > > > NVS) > > > > > > > > > > (XEN) 000000006f6df000 - > > > > > > > 000000006f700000 > > > > (ACPI > > > > > data) > > > > > > > > > > (XEN) 000000006f700000 - > > > > > > > 0000000080000000 > > > > > > (reserved) > > > > > > > > > > (XEN) 00000000a0000000 - > > > > > > > 00000000b0000000 > > > > > > (reserved) > > > > > > > > > > (XEN) 00000000fc000000 - > > > > > > > 00000000fd000000 > > > > > > (reserved) > > > > > > > > > > (XEN) 00000000fed1c000 - > > > > > > > 00000000fed20000 > > > > > > (reserved) > > > > > > > > > > (XEN) 00000000ffc00000 - > > > > > > > 0000000100000000 > > > > > > (reserved) > > > > > > > > > > (XEN) System RAM: 1780MB (1823000kB) > > > > > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 > > > > > > > INTEL > > > > ) > > > > > > > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 > > > > > > > INTEL > > > > THRLY > > > > > > 0 > > > > > > > > > > 1000013) > > > > > > > > > > > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 > > > > > > > INTEL > > > > THRLY > > > > > > 0 > > > > > > > > > MSFT > > > > > > > > > > > 100000D) > > > > > > > > > > > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 > > > > > > > INTEL > > > > THRLY > > > > > > 3 > > > > > > > > > MSFT > > > > > > > > > > > 100000D) > > > > > > > > > > > > > (XEN) ACPI: FACS 6F5F9000, 0040 > > > > > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 > > > > > > > INTEL > > > > THRLY > > > > > > 0 > > > > > > > > > MSFT > > > > > > > > > > > 100000D) > > > > > > > > > > > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 > > > > > > > INTEL > > > > THRLY > > > > > > 1 > > > > > > > > > MSFT > > > > > > > > > > > 100000D) > > > > > > > > > > > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 > > > > > > > INTEL > > > > THRLY > > > > > > 1 > > > > > > > > > MSFT > > > > > > > > > > > 100000D) > > > > > > > > > > > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 > > > > > > > INTEL > > > > THRLY > > > > > > 1 > > > > > > > > > MSFT > > > > > > > > > > > 100000D) > > > > > > > > > > > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 > > > > > > > INTEL > > > > THRLY > > > > > > 0 > > > > > > > > > MSFT > > > > > > > > > > > 100000D) > > > > > > > > > > > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 > > > > INTEL SSDT > > > > > PM > > > > > > > 4000 > > > > > > > > > INTL > > > > > > > > > > > 20061109) > > > > > > > > > > > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 > > > > > > > INTEL > > > > THRLY > > > > > > 1 > > > > > > > > > MSFT > > > > > > > > > > > 100000D) > > > > > > > > > > > > > (XEN) Domain heap initialised > > > > > > > (XEN) Processor #0 6:12 APIC version > > > > > > > 21 (XEN) Processor #2 6:12 APIC > > > > > > > version 21 (XEN) Processor #4 6:12 > > > > > > > APIC version 21 (XEN) Processor #16 > > > > > > > 6:12 APIC version 21 (XEN) Processor > > > > > > > #18 6:12 APIC version 21 (XEN) > > > > > > > Processor #20 6:12 APIC version 21 > > > > > > > (XEN) Processor #1 6:12 APIC version > > > > > > > 21 (XEN) Processor #3 6:12 APIC > > > > > > > version 21 (XEN) Processor #5 6:12 > > > > > > > APIC version 21 (XEN) Processor #17 > > > > > > > 6:12 APIC version 21 (XEN) Processor > > > > > > > #19 6:12 APIC version 21 (XEN) > > > > > > > Processor #21 6:12 APIC version 21 > > > > > > > (XEN) IOAPIC[0]: apic_id 8, version > > > > > > > 32, > > > > address > > > > > > 0xfec00000, GSI > > > > > > > > > 0-23 > > > > > > > > > > > > (XEN) IOAPIC[1]: apic_id 9, version > > > > > > > 32, > > > > address > > > > > > 0xfec90000, GSI > > > > > > > > > 24-47 > > > > > > > > > > > > (XEN) Enabling APIC mode: Phys. > > > > > > > Using 2 > > > > I/O > > > > > APICs > > > > > > > > > > (XEN) Intel VT-d DMAR tables have been > > > > parsed. > > > > > > > > > (XEN) Using scheduler: SMP Credit > > > > Scheduler > > > > > (credit) > > > > > > > > > > (XEN) Detected 3200.207 MHz processor. > > > > > > > (XEN) VMX: Supported advanced > > > > > > > features: (XEN) - APIC MMIO access > > > > > > > virtualisation (XEN) - APIC TPR > > > > > > > shadow > > > > > > > (XEN) - Extended Page Tables (EPT) > > > > > > > (XEN) - Virtual-Processor Identifiers > > > > (VPID) > > > > > > > > > (XEN) - Virtual NMI > > > > > > > (XEN) - MSR direct-access bitmap > > > > > > > (XEN) VMX: EPT is available. > > > > > > > (XEN) VMX: VPID is available. > > > > > > > (XEN) HVM: VMX enabled > > > > > > > (XEN) HVM: Hardware Assisted Paging > > > > detected. > > > > > > > > > (XEN) CPU0: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 1/2 eip 88000 > > > > > > > (XEN) CPU1: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 2/4 eip 88000 > > > > > > > (XEN) CPU2: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 3/16 eip 88000 > > > > > > > (XEN) CPU3: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 4/18 eip 88000 > > > > > > > (XEN) CPU4: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 5/20 eip 88000 > > > > > > > (XEN) CPU5: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 6/1 eip 88000 > > > > > > > (XEN) CPU6: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 7/3 eip 88000 > > > > > > > (XEN) CPU7: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 8/5 eip 88000 > > > > > > > (XEN) CPU8: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 9/17 eip 88000 > > > > > > > (XEN) CPU9: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 10/19 eip > > > > > > > 88000 (XEN) CPU10: Intel Genuine > > > > > > > Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 11/21 eip > > > > > > > 88000 (XEN) CPU11: Intel Genuine > > > > > > > Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Total of 12 processors > > > > > > > activated. (XEN) ENABLING IO-APIC IRQs > > > > > > > (XEN) -> Using new ACK method > > > > > > > (XEN) checking TSC synchronization > > > > > > > across > > > > 12 > > > > > CPUs: > > > > passed. > > > > > > > > > > > (XEN) Platform timer is 14.318MHz HPET > > > > > > > ?(XEN) Brought up 12 CPUs > > > > > > > (XEN) Intel VT-d Snoop Control > > > > > > > supported. (XEN) Intel VT-d DMA > > > > > > > Passthrough not > > > > supported. > > > > > > > > > (XEN) Intel VT-d Queued Invalidation > > > > supported. > > > > > > > > > (XEN) Intel VT-d Interrupt Remapping > > > > supported. > > > > > > > > > (XEN) I/O virtualisation enabled > > > > > > > (XEN) I/O virtualisation for PV guests > > > > disabled > > > > > > > > > (XEN) xenoprof: Initialization failed. > > > > Intel > > > > > processor > > > > > > > model 44 > > > > > > > > > for P6 > > > > > > > > > > > class family is not supported > > > > > > > > > > > > > (XEN) *** LOADING DOMAIN 0 *** > > > > > > > (XEN) Xen kernel: 64-bit, lsb, > > > > > > > compat32 (XEN) Dom0 kernel: 64-bit, > > > > > > > PAE, lsb, > > > > paddr > > > > > 0x1000000 -> > > > > > > > > 0x26bb000 > > > > > > > > > > > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > > > > > > (XEN) Dom0 alloc.: > > > > > > 0000000064000000->0000000068000000 > > > > > > > > (404490 pages > > > > > > > > > > > to be allocated) > > > > > > > > > > > > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > > > > > > (XEN) Loaded kernel: > > > > > > ffffffff81000000->ffffffff826bb000 > > > > > > > > > > (XEN) Init. ramdisk: > > > > > > ffffffff826bb000->ffffffff82d0d800 > > > > > > > > > > (XEN) Phys-Mach map: > > > > > > ffffffff82d0e000->ffffffff83044050 > > > > > > > > > > (XEN) Start info: > > > > > > ffffffff83045000->ffffffff830454b4 > > > > > > > > > > (XEN) Page tables: > > > > > > ffffffff83046000->ffffffff83063000 > > > > > > > > > > (XEN) Boot stack: > > > > > > ffffffff83063000->ffffffff83064000 > > > > > > > > > > (XEN) TOTAL: > > > > > > ffffffff80000000->ffffffff83400000 > > > > > > > > > > (XEN) ENTRY ADDRESS: ffffffff819c1200 > > > > > > > (XEN) Dom0 has maximum 12 VCPUs > > > > > > > (XEN) Scrubbing Free RAM: .done. > > > > > > > (XEN) Xen trace buffers: disabled > > > > > > > (XEN) Std. Loglevel: Errors and > > > > > > > warnings (XEN) Guest Loglevel: Nothing > > > > (Rate-limited: > > > Errors and > > > > > > > > warnings) > > > > > > > > > > > > (XEN) Xen is relinquishing VGA > > > > > > > console. (XEN) *** Serial input -> > > > > > > > DOM0 (type > > > > 'CTRL-a' > > > > > three > > > > > > > times to > > > > > > > > > switch > > > > > > > > > > > input to Xen) > > > > > > > > > > > > > (XEN) Freed 128kB init memory. > > > > > > > mapping kernel into physical memory > > > > > > > Xen: setup ISA identity maps > > > > > > > about to get started... > > > > > > > Initializing cgroup subsys cpuset > > > > > > > Initializing cgroup subsys cpu > > > > > > > Linux version 2.6.32.9 > > > > > > (kishore@localhost.localdomain) > > > > > > > (gcc > > > > > > > > > version > > > > > > > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 > > > > > > SMP > > > > Mon Mar > > > > > 15 > > > > > > > 15:16:28 PDT > > > > > > > > > 2010 > > > > > > > > > > > > Command line: ro > > > > root=/dev/VolGroup01/LogVol00 > > > > > > console=hvc0 > > > > > > > > > > earlyprintk=xen nomodeset > > > > > > > > > > > > > KERNEL supported cpus: > > > > > > > Intel GenuineIntel > > > > > > > AMD AuthenticAMD > > > > > > > Centaur CentaurHauls > > > > > > > BIOS-provided physical RAM map: > > > > > > > Xen: 0000000000000000 - > > > > > > > 000000000009d000 > > > > > > (usable) > > > > > > > > > > Xen: 000000000009d000 - > > > > > > > 0000000000100000 > > > > > > (reserved) > > > > > > > > > > Xen: 0000000000100000 - > > > > > > > 0000000066c0a000 > > > > > > (usable) > > > > > > > > > > Xen: 000000006d597000 - > > > > > > > 000000006d686000 > > > > > > (reserved) > > > > > > > > > > Xen: 000000006f598000 - > > > > > > > 000000006f59a000 > > > > > > (reserved) > > > > > > > > > > Xen: 000000006f59a000 - > > > > > > > 000000006f5af000 > > > > (ACPI > > > > > NVS) > > > > > > > > > > Xen: 000000006f5af000 - > > > > > > > 000000006f5d9000 > > > > > > (reserved) > > > > > > > > > > Xen: 000000006f5d9000 - > > > > > > > 000000006f5f9000 > > > > (ACPI > > > > > data) > > > > > > > > > > Xen: 000000006f5f9000 - > > > > > > > 000000006f6df000 > > > > (ACPI > > > > > NVS) > > > > > > > > > > Xen: 000000006f6df000 - > > > > > > > 000000006f700000 > > > > (ACPI > > > > > data) > > > > > > > > > > Xen: 000000006f700000 - > > > > > > > 0000000080000000 > > > > > > (reserved) > > > > > > > > > > Xen: 00000000a0000000 - > > > > > > > 00000000b0000000 > > > > > > (reserved) > > > > > > > > > > Xen: 00000000fc000000 - > > > > > > > 00000000fd000000 > > > > > > (reserved) > > > > > > > > > > Xen: 00000000fed1c000 - > > > > > > > 00000000fed20000 > > > > > > (reserved) > > > > > > > > > > Xen: 00000000ffc00000 - > > > > > > > 0000000100000000 > > > > > > (reserved) > > > > > > > > > > bootconsole [xenboot0] enabled > > > > > > > DMI 2.4 present. > > > > > > > last_pfn = 0x66c0a max_arch_pfn = > > > > 0x400000000 > > > > > > > > > init_memory_mapping: > > > > > > 0000000000000000-0000000066c0a000 > > > > > > > > > > RAMDISK: 026bb000 - 02d0d800 > > > > > > > ACPI: RSDP 00000000000f03f0 00024 (v02 > > > > INTEL ) > > > > > > > > > ACPI: XSDT 000000006f6fe120 00064 (v01 > > > > INTEL > > > > > THRLY > > > > > > > 00000000 > > > > > > > > > > 01000013) > > > > > > > > > > > > > ACPI: FACP 000000006f6fd000 000F4 (v04 > > > > INTEL > > > > > THRLY > > > > > > > 00000000 > > > > > > > > > MSFT > > > > > > > > > > > 0100000D) > > > > > > > > > > > > > ACPI: DSDT 000000006f6f5000 074F1 (v02 > > > > INTEL > > > > > THRLY > > > > > > > 00000003 > > > > > > > > > MSFT > > > > > > > > > > > 0100000D) > > > > > > > > > > > > > ACPI: FACS 000000006f5f9000 00040 > > > > > > > ACPI: APIC 000000006f6f4000 001CC (v02 > > > > INTEL > > > > > THRLY > > > > > > > 00000000 > > > > > > > > > MSFT > > > > > > > > > > > 0100000D) > > > > > > > > > > > > > ACPI: MCFG 000000006f6f3000 0003C (v01 > > > > INTEL > > > > > THRLY > > > > > > > 00000001 > > > > > > > > > MSFT > > > > > > > > > > > 0100000D) > > > > > > > > > > > > > ACPI: HPET 000000006f6f2000 00038 (v01 > > > > INTEL > > > > > THRLY > > > > > > > 00000001 > > > > > > > > > MSFT > > > > > > > > > > > 0100000D) > > > > > > > > > > > > > ACPI: SLIT 000000006f6f1000 00030 (v01 > > > > INTEL > > > > > THRLY > > > > > > > 00000001 > > > > > > > > > MSFT > > > > > > > > > > > 0100000D) > > > > > > > > > > > > > ACPI: WDDT 000000006f6f0000 00040 (v01 > > > > INTEL > > > > > THRLY > > > > > > > 00000000 > > > > > > > > > MSFT > > > > > > > > > > > 0100000D) > > > > > > > > > > > > > ACPI: SSDT 000000006f5d9000 1FDDC (v01 > > > > INTEL > > > > > SSDT PM > > > > > > > 00004000 > > > > > > > > > INTL > > > > > > > > > > > 20061109) > > > > > > > > > > > > > ACPI: 000000006f6ee000 001D0 (v01 > > > > INTEL > > > > > THRLY > > > > > > > 00000001 > > > > > > > > > MSFT > > > > > > > > > > > 0100000D) > > > > > > > > > > > > > No NUMA configuration found > > > > > > > Faking a node at > > > > > > 0000000000000000-0000000066c0a000 > > > > > > > > > > Bootmem setup node 0 > > > > > > 0000000000000000-0000000066c0a000 > > > > > > > > > > NODE_DATA [0000000000008000 - > > > > 000000000001ffff] > > > > > > > > > bootmap [0000000000020000 - > > > > 000000000002cd87] > > > > > pages d > > > > > > > > > > (9 early reservations) ==> bootmem > > > > [0000000000 - > > > > > > 0066c0a000] > > > > > > > > > > > #0 [0000000000 - 0000001000] BIOS > > > > > > > data > > > > page > > > > > ==> > > > > > > > [0000000000 > > > > > > > > > - > > > > > > > > > > > 0000001000] > > > > > > > > > > > > > #1 [0003046000 - 0003063000] XEN > > > > PAGETABLES > > > > > ==> > > > > > > > [0003046000 > > > > > > > > > - > > > > > > > > > > > 0003063000] > > > > > > > > > > > > > #2 [0000006000 - 0000008000] > > > > TRAMPOLINE > > > > > ==> > > > > > > > [0000006000 > > > > > > > > > - > > > > > > > > > > > 0000008000] > > > > > > > > > > > > > #3 [0001000000 - 000269ae98] TEXT > > > > DATA BSS > > > > > ==> > > > > > > > [0001000000 > > > > > > > > > - > > > > > > > > > > > 000269ae98] > > > > > > > > > > > > > #4 [00026bb000 - 0002d0d800] > > > > RAMDISK > > > > > ==> > > > > > > > [00026bb000 > > > > > > > > > - > > > > > > > > > > > 0002d0d800] > > > > > > > > > > > > > #5 [0002d0e000 - 0003046000] XEN > > > > > > > START > > > > INFO > > > > > ==> > > > > > > > [0002d0e000 > > > > > > > > > - > > > > > > > > > > > 0003046000] > > > > > > > > > > > > > #6 [000269b000 - 000269b011] > > > > BRK > > > > > ==> > > > > > > > [000269b000 > > > > > > > > > - > > > > > > > > > > > 000269b011] > > > > > > > > > > > > > #7 [0000100000 - 000041a000] > > > > PGTABLE > > > > > ==> > > > > > > > [0000100000 > > > > > > > > > - > > > > > > > > > > > 000041a000] > > > > > > > > > > > > > #8 [0000001000 - 0000001030] > > > > > > > ACPI > > > > SLIT > > > > > ==> > > > > > > > [0000001000 > > > > > > > > > - > > > > > > > > > > > 0000001030] > > > > > > > > > > > > > found SMP MP-table at > > > > > > > [ffff8800000fd750] > > > > fd750 > > > > > > > > > Zone PFN ranges: > > > > > > > DMA 0x00000000 -> 0x00001000 > > > > > > > DMA32 0x00001000 -> 0x00100000 > > > > > > > Normal 0x00100000 -> 0x00100000 > > > > > > > Movable zone start PFN for each node > > > > > > > early_node_map[2] active PFN ranges > > > > > > > 0: 0x00000000 -> 0x0000009d > > > > > > > 0: 0x00000100 -> 0x00066c0a > > > > > > > ACPI: PM-Timer IO Port: 0x408 > > > > > > > ACPI: LAPIC (acpi_id[0x00] > > > > > > > lapic_id[0x00] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x01] > > > > > > > lapic_id[0x02] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x02] > > > > > > > lapic_id[0x04] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x03] > > > > > > > lapic_id[0x10] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x04] > > > > > > > lapic_id[0x12] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x05] > > > > > > > lapic_id[0x14] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x06] > > > > > > > lapic_id[0x01] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x07] > > > > > > > lapic_id[0x03] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x08] > > > > > > > lapic_id[0x05] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x09] > > > > > > > lapic_id[0x11] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x0a] > > > > > > > lapic_id[0x13] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x0b] > > > > > > > lapic_id[0x15] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x0c] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x0d] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x0e] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x0f] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x10] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x11] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x12] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x13] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x14] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x15] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x16] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x17] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x00] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x01] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x02] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x03] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x04] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x05] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x06] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x07] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x08] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x09] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x10] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x11] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x12] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x13] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x14] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x15] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x16] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x17] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: IOAPIC (id[0x08] > > > > > > > address[0xfec00000] > > > > > > gsi_base[0]) > > > > > > > > > > IOAPIC[0]: apic_id 8, version 0, > > > > > > > address > > > > > > 0xfec00000, GSI > > > > > > > 0-0 > > > > > > > > > > > ACPI: IOAPIC (id[0x09] > > > > > > > address[0xfec90000] > > > > > > gsi_base[24]) > > > > > > > > > > IOAPIC[1]: apic_id 9, version 0, > > > > > > > address > > > > > > 0xfec90000, GSI > > > > > > > 24-24 > > > > > > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 > > > > global_irq 2 > > > > > dfl dfl) > > > > > > > > > > ERROR: Unable to locate IOAPIC for GSI > > > > > > > 2 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 > > > > global_irq 9 > > > > > high > > > > > > > level) > > > > > > > > > > > ERROR: Unable to locate IOAPIC for GSI > > > > > > > 9 Using ACPI (MADT) for SMP > > > > > > > configuration > > > > > > information > > > > > > > > > > ACPI: HPET id: 0x8086a401 base: > > > > > > > 0xfed00000 SMP: Allowing 12 CPUs, 0 > > > > > > > hotplug CPUs PM: Registered nosave > > > > > > > memory: > > > > 000000000009d000 - > > > > > > > 0000000000100000 > > > > > > > > > > > > Allocating PCI resources starting at > > > > b0000000 > > > > > (gap: > > > > > b0000000:4c000000) > > > > > > > > > > > > Booting paravirtualized kernel on Xen > > > > > > > Xen version: 3.4.3-rc4-pre > > > > > > > (preserve-AD) > > > > (dom0) > > > > > > > > > NR_CPUS:512 nr_cpumask_bits:512 > > > > nr_cpu_ids:12 > > > > > > nr_node_ids:1 > > > > > > > > > > > PERCPU: Embedded 478 pages/cpu > > > > @ffff880005ebc000 > > > > > > s1928024 r8192 > > > > > > > > > d21672 > > > > > > > > > > > u1957888 > > > > > > > > > > > > > pcpu-alloc: s1928024 r8192 d21672 > > > > > > > u1957888 > > > > > > > > alloc=478*4096 > > > > > > > > > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] > > > > > > > 03 > > > > [0] 04 > > > > > [0] 05 > > > > > > > [0] 06 > > > > > > > > > [0] 07 > > > > > > > > > > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] > > > > > > > 11 Xen: using vcpu_info placement > > > > > > > Built 1 zonelists in Node order, > > > > > > > mobility > > > > > > grouping on. > > > > > > > Total > > > > > > > > > pages: > > > > > > 409291 > > > > > > > > > > > > > Policy zone: DMA32 > > > > > > > Kernel command line: ro > > > > > > root=/dev/VolGroup01/LogVol00 > > > > > > > > console=hvc0 > > > > > > > > > > > earlyprintk=xen nomodeset > > > > > > > > > > > > > PID hash table entries: 4096 (order: > > > > > > > 3, > > > > 32768 > > > > > bytes) > > > > > > > > > > Initializing CPU#0 > > > > > > > DMA: Placing 64MB software IO TLB > > > > > > > between > > > > > > > > ffff880007525000 - > > > > > > > > > > ffff88000b525000 > > > > > > > > > > > > > DMA: software IO TLB at phys 0x7525000 > > > > > > > - > > > > > > 0xb525000 > > > > > > > > > > xen_swiotlb_fixup: > > > > > > > buf=ffff880007525000 > > > > > > size=67108864 > > > > > > > > > > xen_swiotlb_fixup: > > > > > > > buf=ffff88000b585000 > > > > > > size=32768 > > > > > > > > > > Memory: 1514268k/1683496k available > > > > > > > (4654k > > > > kernel > > > > > code, > > > > > > > 396k > > > > > > > > > absent, > > > > > > > > > > > 168832k reserved, 3443k data, 3396k > > > > > > init) > > > > > > > > > > > > > SLUB: Genslabs=14, HWalign=64, > > > > > > > Order=0-3, > > > > > > MinObjects=0, > > > > > > > > CPUs=12, > > > > > > > > > > > Nodes=1 > > > > > > > > > > > > > Hierarchical RCU implementation. > > > > > > > NR_IRQS:4352 nr_irqs:3072 > > > > > > > Already setup the GSI :0 > > > > > > > Already setup the GSI :1 > > > > > > > Already setup the GSI :2 > > > > > > > Already setup the GSI :3 > > > > > > > Already setup the GSI :4 > > > > > > > Already setup the GSI :5 > > > > > > > Already setup the GSI :6 > > > > > > > Already setup the GSI :7 > > > > > > > Already setup the GSI :8 > > > > > > > Already setup the GSI :9 > > > > > > > Already setup the GSI :10 > > > > > > > Already setup the GSI :11 > > > > > > > Already setup the GSI :12 > > > > > > > Already setup the GSI :13 > > > > > > > Already setup the GSI :14 > > > > > > > Already setup the GSI :15 > > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 > > > > global_irq 2 > > > > > dfl dfl) > > > > > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 > > > > global_irq 9 > > > > > high > > > > > > > level) > > > > > > > > > > > xen: sci override: source_irq=9 > > > > global_irq=9 > > > > > trigger=c > > > > > > > > polarity=1 > > > > > > > > > > > > xen_allocate_pirq: returning irq 9 for > > > > > > > gsi > > > > 9 > > > > > > > > > Already setup the GSI :9 > > > > > > > xen: acpi sci 9 > > > > > > > Console: colour VGA+ 80x25 > > > > > > > console [hvc0] enabled, bootconsole > > > > disabled > > > > > console > > > > > > > [hvc0] > > > > > > > > > enabled, > > > > > > > > > > > bootconsole disabled > > > > > > > > > > > > > Lock dependency validator: Copyright > > > > > > > (c) > > > > 2006 Red > > > > > Hat, > > > > > > > Inc., > > > > > > > > > Ingo > > > > > > > > > > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 > > > > > > ... > > > > > > MAX_LOCK_DEPTH: > > > > > 48 > > > > > > > > > > > ... MAX_LOCKDEP_KEYS: 8191 ... > > > > > > CLASSHASH_SIZE: > > > > > 4096 ... > > > > > > > > > > > MAX_LOCKDEP_ENTRIES: 16384 ... > > > > > > MAX_LOCKDEP_CHAINS: > > > > 32768 > > > > > > > > > ... > > > > > > > > > > > CHAINHASH_SIZE: 16384 memory > > > > > > used > > > > by lock > > > > > > dependency > > > > > > > > > info: > > > > > > 6367 kB per task-struct memory > > > > > > footprint: > > > > 2688 > > > > > bytes > > > > > > > allocated > > > > > > > > > 17039360 > > > > > > > > > > > bytes of page_cgroup please try > > > > > > 'cgroup_disable=memory' > > > > > > > option if > > > > > > > > > you > > > > > > > > > > > don't want memory cgroups installing Xen > > > > timer for > > > > > CPU 0 > > > > > > > Detected > > > > > > > > > > 3200.206 MHz processor. Calibrating > > > > > > delay > > > > loop > > > > > (skipped), > > > > > > > value > > > > > > > > > > calculated using timer frequency.. > > > > > > 6400.41 > > > > BogoMIPS > > > > > > (lpj=3200206) > > > > > > > > > > Security Framework initialized SELinux: > > > > > > Initializing. > > > > > > > Dentry > > > > > > > > > cache hash > > > > > > > > > > > table entries: 262144 (order: 9, 2097152 > > > > bytes) > > > > > > Inode-cache hash > > > > > > > > > table > > > > > > > > > > > entries: 131072 (order: 8, 1048576 > > > > > > bytes) > > > > > > Mount-cache hash > > > > > > > table > > > > > > > > > > entries: 256 Initializing cgroup subsys > > > > > > ns > > > > > > Initializing > > > > > > > cgroup > > > > > > > > > subsys > > > > > > > > > > > cpuacct Initializing cgroup subsys > > > > > > memory > > > > > > Initializing > > > > > > > cgroup > > > > > > > > > subsys > > > > > > > > > > > devices Initializing cgroup subsys > > > > > > freezer > > > > > > Initializing > > > > > > > cgroup > > > > > > > > > subsys > > > > > > > > > > > net_cls CPU: L1 I cache: 32K, L1 D > > > > > > cache: > > > > 32K CPU: > > > L2 > > > > > > > cache: 256K > > > > > > > > > CPU: > > > > > > L3 cache: 12288K CPU 0/0x0 -> Node 0 > > > > > > CPU: > > > > > > Unsupported > > > > > > > number of > > > > > > > > > siblings > > > > > > > > > > > 32 Performance Events: unsupported p6 > > > > > > CPU > > > > model 44 > > > > > no PMU > > > > > > > driver, > > > > > > > > > > software events only. lockdep: fixing up > > > > > > alternatives. SMP > > > > > > > > alternatives: > > > > > > switching to UP code ACPI: Core revision > > > > 20090903 > > > > > ftrace: > > > > > converting > > > > > > > > > > > mcount calls to 0f 1f 44 00 00 ftrace: > > > > allocating > > > > > 27971 > > > > > > > entries > > > > > > > > > in 110 > > > > > > > > > > > pages installing Xen timer for CPU 1 > > > > lockdep: > > > fixing up > > > > > > > > alternatives. > > > > > > > > > > > SMP alternatives: switching to SMP code > > > > > > Initializing CPU#1 > > > > > > > CPU: > > > > > L1 I > > > > > > > > > > > cache: 32K, L1 D cache: 32K CPU: L2 > > > > > > cache: > > > > 256K > > > > > CPU: L3 > > > > > > > cache: > > > > > 12288K > > > > > > > > > > > CPU 1/0x0 -> Node 0 CPU: Unsupported > > > > > > number > > > > of > > > > > siblings 32 > > > > > > > > installing > > > > > > > > > > > Xen timer for CPU 2 Initializing CPU#2 > > > > > > CPU: > > > > L1 I > > > > > cache: > > > > 32K, L1 D > > > > > > > > > cache: > > > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: > > > > 12288K CPU > > > > > 2/0x0 -> > > > > > > > Node 0 > > > > > > > > > CPU: > > > > > > Unsupported number of siblings 32 > > > > > > installing > > > > Xen > > > > > timer for > > > > > > > CPU 3 > > > > > > > > > > Initializing CPU#3 CPU: L1 I cache: 32K, > > > > > > L1 > > > > D > > > > > cache: 32K > > > > > > > CPU: L2 > > > > > > > > > cache: > > > > > > 256K CPU: L3 cache: 12288K CPU 3/0x0 -> > > > > > > Node > > > > 0 CPU: > > > > Unsupported > > > > > > > > > number > > > > > > > > > > > of siblings 32 installing Xen timer for > > > > > > CPU > > > > 4 > > > > > Initializing > > > > > > > CPU#4 > > > > > > > > > CPU: L1 > > > > > > > > > > > I cache: 32K, L1 D cache: 32K CPU: L2 > > > > > > cache: > > > > 256K > > > > > CPU: L3 > > > > > > > cache: > > > > > 12288K > > > > > > > > > > > CPU 4/0x0 -> Node 0 CPU: Unsupported > > > > > > number > > > > of > > > > > siblings 32 > > > > > > > > installing > > > > > > > > > > > Xen timer for CPU 5 Initializing CPU#5 > > > > > > CPU: > > > > L1 I > > > > > cache: > > > > 32K, L1 D > > > > > > > > > cache: > > > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: > > > > 12288K CPU > > > > > 5/0x0 -> > > > > > > > Node 0 > > > > > > > > > CPU: > > > > > > Unsupported number of siblings 32 > > > > > > installing > > > > Xen > > > > > timer for > > > > > > > CPU 6 > > > > > > > > > > Initializing CPU#6 CPU: L1 I cache: 32K, > > > > > > L1 > > > > D > > > > > cache: 32K > > > > > > > CPU: L2 > > > > > > > > > cache: > > > > > > 256K CPU: L3 cache: 12288K CPU 6/0x0 -> > > > > > > Node > > > > 0 CPU: > > > > Unsupported > > > > > > > > > number > > > > > > > > > > > of siblings 32 installing Xen timer for > > > > > > CPU > > > > 7 > > > > > Initializing > > > > > > > CPU#7 > > > > > > > > > CPU: L1 > > > > > > > > > > > I cache: 32K, L1 D cache: 32K CPU: L2 > > > > > > cache: > > > > 256K > > > > > CPU: L3 > > > > > > > cache: > > > > > 12288K > > > > > > > > > > > CPU 7/0x0 -> Node 0 CPU: Unsupported > > > > > > number > > > > of > > > > > siblings 32 > > > > > > > > installing > > > > > > > > > > > Xen timer for CPU 8 Initializing CPU#8 > > > > > > CPU: > > > > L1 I > > > > > cache: > > > > 32K, L1 D > > > > > > > > > cache: > > > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: > > > > 12288K CPU > > > > > 8/0x0 -> > > > > > > > Node 0 > > > > > > > > > CPU: > > > > > > Unsupported number of siblings 32 > > > > > > installing > > > > Xen > > > > > timer for > > > > > > > CPU 9 > > > > > > > > > > Initializing CPU#9 CPU: L1 I cache: 32K, > > > > > > L1 > > > > D > > > > > cache: 32K > > > > > > > CPU: L2 > > > > > > > > > cache: > > > > > > 256K CPU: L3 cache: 12288K CPU 9/0x0 -> > > > > > > Node > > > > 0 CPU: > > > > Unsupported > > > > > > > > > number > > > > > > > > > > > of siblings 32 installing Xen timer for > > > > > > CPU > > > > 10 > > > > > > Initializing > > > > > > > > > CPU#10 CPU: > > > > > > L1 I cache: 32K, L1 D cache: 32K CPU: L2 > > > > cache: > > > 256K CPU: > > > > L3 > > > > > > > > > cache: > > > > > > 12288K CPU 10/0x0 -> Node 0 CPU: > > > > > > Unsupported > > > > number > > > > > of > > > > > > > siblings > > > > > > > > > 32 > > > > > > > > > > > installing Xen timer for CPU 11 > > > > > > Initializing > > > > CPU#11 > > > > > CPU: > > > > L1 I > > > > > > > > > cache: > > > > > > 32K, L1 D cache: 32K CPU: L2 cache: 256K > > > > CPU: L3 > > > > > cache: > > > > 12288K > > > > > > > > > CPU > > > > > > > > > > > 11/0x0 -> Node 0 CPU: Unsupported number > > > > > > of > > > > > > siblings 32 > > > > > > > Brought > > > > > > > > > up 12 > > > > > > > > > > > CPUs Grant table initialized regulator: > > > > > > core > > > > > > version 0.5 > > > > > > > Time: > > > > > 14:45:00 > > > > > > > > > > > Date: 03/16/10 NET: Registered protocol > > > > family 16 > > > > > > > xenbus_probe_init ok > > > > > > > > > > > ACPI FADT declares the system doesn't > > > > support PCIe > > > > > ASPM, > > > > > > > so > > > > > > > > > disable it > > > > > > > > > > > ACPI: bus type pci registered PCI: MCFG > > > > > > configuration 0: > > > > base > > > > > > > > > a0000000 > > > > > > > > > > > segment 0 buses 0 - 255 PCI: MCFG area > > > > > > at > > > > a0000000 > > > > > > reserved in > > > > > > > > > E820 PCI: > > > > > > Using MMCONFIG at a0000000 - afffffff > > > > > > PCI: > > > > Using > > > > > > configuration > > > > > > > > > type 1 > > > > > > > > > > > for base access bio: create slab <bio-0> > > > > > > at > > > > 0 ACPI > > > > > Error: > > > > Field > > > > > > > > > [CPB3] > > > > > > > > > > > at 96 exceeds Buffer [NULL] size 64 > > > > > > (bits) > > > > > > > > > > (20090903/dsopcode-596) ACPI > > > > > > > > > > > Error (psparse-0537): Method > > > > > > parse/execution > > > > failed > > > > > > [\_SB_._OSC] > > > > > > > > > (Node > > > > > > > > > > > ffff880064e00c98), AE_AML_BUFFER_LIMIT > > > > > > ACPI: > > > > > > Interpreter > > > > > > > enabled > > > > > > > > > ACPI: > > > > > > (supports S0 S1 S3 S4 S5) ACPI: Using > > > > > > IOAPIC > > > > for > > > > > interrupt > > > > > > > > routing ACPI > > > > > > > > > > > Warning: Incorrect checksum in table [ > > > > > > ] > > > > - 97, > > > > > should > > > > > > > be DB > > > > > > > > > > (20090903/tbutils-314) ACPI: No dock > > > > > > devices > > > > found. > > > > > ACPI: > > > > PCI > > > > > > > > > Root > > > > > > > > > > > Bridge [PCI0] (0000:00) pci > > > > > > 0000:00:01.0: > > > > PME# > > > > > supported > > > > > > > from D0 > > > > > > > > > D3hot > > > > > > > > > > > D3cold pci 0000:00:01.0: PME# disabled > > > > > > pci > > > > > > 0000:00:02.0: > > > > PME# > > > > > > > > > supported > > > > > > > > > > > from D0 D3hot D3cold pci 0000:00:02.0: > > > > > > PME# > > > > > > disabled pci > > > > > > > > 0000:00:03.0: > > > > > > PME# supported from D0 D3hot D3cold pci > > > > > > 0000:00:03.0: PME# > > > > > > > > disabled pci > > > > > > > > > > > 0000:00:04.0: PME# supported from D0 > > > > > > D3hot > > > > D3cold > > > > > pci > > > > > > > > 0000:00:04.0: PME# > > > > > > > > > > > disabled pci 0000:00:05.0: PME# > > > > > > supported > > > > from D0 > > > > > D3hot > > > > > > > D3cold > > > > > > > > > pci > > > > > > > > > > > 0000:00:05.0: PME# disabled pci > > > > 0000:00:06.0: PME# > > > > > > supported from > > > > > > > > > D0 > > > > > > > > > > > D3hot D3cold pci 0000:00:06.0: PME# > > > > > > disabled > > > > pci > > > > > > 0000:00:07.0: > > > > > PME# > > > > > > > > > > > supported from D0 D3hot D3cold pci > > > > 0000:00:07.0: > > > PME# > > > > > > > disabled > > > > > > > > > pci > > > > > > > > > > > 0000:00:08.0: PME# supported from D0 > > > > > > D3hot > > > > D3cold > > > > > pci > > > > > > > > 0000:00:08.0: PME# > > > > > > > > > > > disabled pci 0000:00:09.0: PME# > > > > > > supported > > > > from D0 > > > > > D3hot > > > > > > > D3cold > > > > > > > > > pci > > > > > > > > > > > 0000:00:09.0: PME# disabled pci > > > > 0000:00:0a.0: PME# > > > > > > supported from > > > > > > > > > D0 > > > > > > > > > > > D3hot D3cold pci 0000:00:0a.0: PME# > > > > > > disabled > > > > pci > > > > > > 0000:00:13.0: > > > > > PME# > > > > > > > > > > > supported from D0 D3hot D3cold pci > > > > 0000:00:13.0: > > > PME# > > > > > > > disabled > > > > > > > > > pci > > > > > > > > > > > 0000:00:1a.7: PME# supported from D0 > > > > > > D3hot > > > > D3cold > > > > > pci > > > > > > > > 0000:00:1a.7: PME# > > > > > > > > > > > disabled pci 0000:00:1c.0: PME# > > > > > > supported > > > > from D0 > > > > > D3hot > > > > > > > D3cold > > > > > > > > > pci > > > > > > > > > > > 0000:00:1c.0: PME# disabled pci > > > > 0000:00:1c.4: PME# > > > > > > supported from > > > > > > > > > D0 > > > > > > > > > > > D3hot D3cold pci 0000:00:1c.4: PME# > > > > > > disabled > > > > pci > > > > > > 0000:00:1c.5: > > > > > PME# > > > > > > > > > > > supported from D0 D3hot D3cold pci > > > > 0000:00:1c.5: > > > PME# > > > > > > > disabled > > > > > > > > > pci > > > > > > > > > > > 0000:00:1d.7: PME# supported from D0 > > > > > > D3hot > > > > D3cold > > > > > pci > > > > > > > > 0000:00:1d.7: PME# > > > > > > > > > > > disabled pci 0000:00:1f.0: quirk: region > > > > 0400-047f > > > > > claimed > > > > > > > by > > > > > > > > > ICH6 > > > > > > > > > > > ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: > > > > region > > > > > 0500-053f > > > > > > > claimed > > > > > > > > > by ICH6 > > > > > > > > > > > GPIO pci 0000:00:1f.0: ICH7 LPC Generic > > > > > > IO > > > > decode 1 > > > > > PIO at > > > > > > > 0680 > > > > > > > > > (mask > > > > > > > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic > > > > > > IO > > > > decode > > > > > 2 PIO > > > > > > > at 0ca0 > > > > > > > > > (mask > > > > > > > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic > > > > > > IO > > > > decode > > > > > 3 PIO > > > > > > > at 0600 > > > > > > > > > (mask > > > > > > > > > > > 001f) pci 0000:00:1f.2: PME# supported > > > > > > from > > > > D3hot > > > > > pci > > > > > > > > 0000:00:1f.2: PME# > > > > > > > > > > > disabled pci 0000:01:00.0: PME# > > > > > > supported > > > > from D0 > > > > > D3hot > > > > > > > D3cold > > > > > > > > > pci > > > > > > > > > > > 0000:01:00.0: PME# disabled pci > > > > 0000:01:00.1: PME# > > > > > > supported from > > > > > > > > > D0 > > > > > > > > > > > D3hot D3cold pci 0000:01:00.1: PME# > > > > > > disabled > > > > pci > > > > > > 0000:0c:00.0: > > > > > disabling > > > > > > > > > > > ASPM on pre-1.1 PCIe device. You can > > > > > > enable > > > > it > > > > > with > > > > > > > > 'pcie_aspm=force' > > > > > > > > > > > pci 0000:00:1e.0: transparent bridge > > > > > > ACPI: > > > > PCI Root > > > > > Bridge > > > > > > > [PCI1] > > > > > > > > > > (0000:fe) ACPI: PCI Root Bridge [PCI2] > > > > (0000:ff) > > > > > ACPI: PCI > > > > > > > > Interrupt > > > > > > > > > > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 > > > > > > 14 > > > > 15) > > > > > ACPI: PCI > > > > > > > > Interrupt Link > > > > > > > > > > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 > > > > > > 15) > > > > ACPI: PCI > > > > > > Interrupt > > > > > > > > > Link > > > > > > > > > > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 > > > > > > 15) > > > > ACPI: PCI > > > > > > Interrupt > > > > > > > > > Link > > > > > > > > > > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 > > > > > > 15) > > > > ACPI: PCI > > > > > > Interrupt > > > > > > > > > Link > > > > > > > > > > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) > > > > > > *0, > > > > > > disabled. > > > > > > > ACPI: PCI > > > > > > > > > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 > > > > > > 10 > > > > *11 12 > > > > > 14 15) > > > > > > > ACPI: > > > > > PCI > > > > > > > > > > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 > > > > > > 10 > > > > 11 12 14 > > > > > 15) > > > > > > > *0, > > > > > > > > > disabled. > > > > > > > > > > > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 > > > > > > 4 5 > > > > 6 7 9 > > > > > *10 11 > > > > > > > 12 14 > > > > > > > > > 15) > > > > > > > > > > > xenbus_probe_backend_init bus registered > > > > > > ok > > > > > > > > > > xenbus_probe_frontend_init > > > > > > > > > > > bus registered ok xen_balloon: > > > > > > Initialising > > > > balloon > > > > > driver > > > > > > > with > > > > > > > > > page > > > > > > > > > > > order 0. vgaarb: device added: > > > > > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none > > > > > > > vgaarb: > > > > > loaded > > > > > > > > > > > SCSI subsystem initialized usbcore: > > > > registered new > > > > > > interface > > > > > > > > > driver > > > > > > > > > > > usbfs usbcore: registered new interface > > > > driver hub > > > > > > usbcore: > > > > > registered > > > > > > > > > > > new device driver usb PCI: Using ACPI > > > > > > for > > > > IRQ > > > > > routing > > > > > > > NetLabel: > > > > > > Initializing NetLabel: domain hash size > > > > > > = > > > > 128 > > > > > NetLabel: > > > > > protocols = > > > > > > > > > > > UNLABELED CIPSOv4 NetLabel: unlabeled > > > > traffic > > > > > allowed by > > > > > > > default > > > > > > > > > > Switching to clocksource xen kstop/0 > > > > > > used > > > > greatest > > > > > stack > > > > > > > depth: > > > > > 6568 > > > > > > > > > > > bytes left kstop/1 used greatest stack > > > > depth: 6536 > > > > > bytes > > > > > > > left > > > > > > > > > pnp: PnP > > > > > > > > > > > ACPI init ACPI: bus type pnp registered > > > > > > xen_allocate_pirq: > > > > > returning irq > > > > > > > > > > > 8 for gsi 8 Already setup the GSI :8 > > > > > > xen_allocate_pirq: > > > > returning > > > > > > > > > irq 13 > > > > > > > > > > > for gsi 13 Already setup the GSI :13 > > > > > > pnp: > > > > PnP ACPI: > > > found > > > > > > > 13 > > > > > > > > > devices > > > > > > > > > > > ACPI: ACPI bus type pnp unregistered > > > > > > system > > > > 00:07: > > > ioport > > > > > > > range > > > > > > > > > > 0x500-0x53f has been reserved system > > > > > > 00:07: > > > > ioport > > > > > range > > > > > > > > 0x400-0x47f has > > > > > > > > > > > been reserved system 00:07: ioport range > > > > > > 0x800-0x81f has > > > > > > > been > > > > > > > > > reserved > > > > > > > > > > > system 00:07: ioport range 0x2f8-0x2ff > > > > > > has > > > > been > > > > > reserved > > > > > > > system > > > > > > > > > 00:07: > > > > > > iomem range 0xfed1c000-0xfed8bffe could > > > > > > not > > > > be > > > > > reserved > > > > > > > system > > > > > > > > > 00:07: > > > > > > iomem range 0xff000000-0xffffffff could > > > > > > not > > > > be > > > > > reserved > > > > > > > system > > > > > > > > > 00:07: > > > > > > iomem range 0xfee00000-0xfeefffff has > > > > > > been > > > > reserved > > > > > system > > > > > > > 00:07: > > > > > iomem > > > > > > > > > > > range 0xfe900000-0xfe90001f has been > > > > reserved > > > > > system > > > > > > > 00:07: iomem > > > > > > > > > range > > > > > > > > > > > 0xfea00000-0xfea0001f has been reserved > > > > system > > > > > 00:07: > > > > iomem range > > > > > > > > > > 0xfed1b000-0xfed1bfff has been reserved > > > > > > pci > > > > > > 0000:0c:00.0: > > > > BAR 6: > > > > > no > > > > > > > > > > > parent found for of device > > > > [0xffff0000-0xffffffff] > > > > > pci > > > > > > > > 0000:00:01.0: PCI > > > > > > > > > > > bridge, secondary bus 0000:01 pci > > > > 0000:00:01.0: > > > IO > > > > > > > window: > > > > > > 0x1000-0x1fff pci 0000:00:01.0: MEM > > > > window: > > > > > 0xb1900000-0xb19fffff pci > > > > > > > > > > > 0000:00:01.0: PREFETCH window: > > > > > > disabled > > > > pci > > > > > > 0000:00:02.0: PCI > > > > > > > > > bridge, > > > > > > > > > > > secondary bus 0000:02 pci 0000:00:02.0: > > > > > > IO > > > > > > window: > > > > disabled pci > > > > > > > > > > 0000:00:02.0: MEM window: disabled pci > > > > > > 0000:00:02.0: > > > > PREFETCH > > > > > > > > > > window: disabled pci 0000:00:03.0: PCI > > > > bridge, > > > > > secondary > > > > > > > bus > > > > > > > > > 0000:03 pci > > > > > > > > > > > 0000:00:03.0: IO window: disabled pci > > > > > > 0000:00:03.0: > > > > MEM > > > > > > > > > window: > > > > > > disabled pci 0000:00:03.0: PREFETCH > > > > window: > > > disabled pci > > > > > > > > 0000:00:04.0: > > > > > > PCI bridge, secondary bus 0000:04 pci > > > > 0000:00:04.0: > > > IO > > > > > > > window: > > > > > > disabled pci 0000:00:04.0: MEM window: > > > > disabled > > > > > pci > > > > > > > > 0000:00:04.0: > > > > > > PREFETCH window: disabled pci > > > > > > 0000:00:05.0: > > > > PCI > > > > > bridge, > > > > > > > secondary > > > > > > > > > bus > > > > > > > > > > > 0000:05 pci 0000:00:05.0: IO window: > > > > disabled pci > > > > > > 0000:00:05.0: > > > > > MEM > > > > > > > > > > > window: disabled pci 0000:00:05.0: > > > > PREFETCH > > > > > window: > > > > disabled > > > > > > > > > pci > > > > > > > > > > > 0000:00:06.0: PCI bridge, secondary bus > > > > 0000:06 pci > > > > > > 0000:00:06.0: > > > > > IO > > > > > > > > > > > window: disabled pci 0000:00:06.0: MEM > > > > window: > > > disabled > > > > > > > pci > > > > > > > > > > 0000:00:06.0: PREFETCH window: > > > > > > disabled > > > > pci > > > > > > 0000:00:07.0: PCI > > > > > > > > > bridge, > > > > > > > > > > > secondary bus 0000:07 pci 0000:00:07.0: > > > > > > IO > > > > > > window: > > > > disabled pci > > > > > > > > > > 0000:00:07.0: MEM window: disabled pci > > > > > > 0000:00:07.0: > > > > PREFETCH > > > > > > > > > > window: disabled pci 0000:00:08.0: PCI > > > > bridge, > > > > > secondary > > > > > > > bus > > > > > > > > > 0000:08 pci > > > > > > > > > > > 0000:00:08.0: IO window: disabled pci > > > > > > 0000:00:08.0: > > > > MEM > > > > > > > > > window: > > > > > > disabled pci 0000:00:08.0: PREFETCH > > > > window: > > > disabled pci > > > > > > > > 0000:00:09.0: > > > > > > PCI bridge, secondary bus 0000:09 pci > > > > 0000:00:09.0: > > > IO > > > > > > > window: > > > > > > 0x3000-0x3fff pci 0000:00:09.0: MEM > > > > window: > > > > > 0xb1b00000-0xb1cfffff pci > > > > > > > > > > > 0000:00:09.0: PREFETCH window: > > > > > > > > > > 0x000000b1d00000-0x000000b1efffff pci > > > > > > > > > > > 0000:00:0a.0: PCI bridge, secondary bus > > > > 0000:0a pci > > > > > > 0000:00:0a.0: > > > > > IO > > > > > > > > > > > window: disabled pci 0000:00:0a.0: MEM > > > > window: > > > disabled > > > > > > > pci > > > > > > > > > > 0000:00:0a.0: PREFETCH window: > > > > > > disabled > > > > pci > > > > > > 0000:00:1c.0: PCI > > > > > > > > > bridge, > > > > > > > > > > > secondary bus 0000:0b pci 0000:00:1c.0: > > > > > > IO > > > > > > window: > > > > disabled pci > > > > > > > > > > 0000:00:1c.0: MEM window: disabled pci > > > > > > 0000:00:1c.0: > > > > PREFETCH > > > > > > > > > > window: disabled pci 0000:00:1c.4: PCI > > > > bridge, > > > > > secondary > > > > > > > bus > > > > > > > > > 0000:0c pci > > > > > > > > > > > 0000:00:1c.4: IO window: disabled pci > > > > > > 0000:00:1c.4: > > > > MEM > > > > > > > > > window: > > > > > > 0xb1000000-0xb18fffff pci 0000:00:1c.4: > > > > PREFETCH > > > > > window: > > > > > > 0x000000b0000000-0x000000b0ffffff pci > > > > 0000:00:1c.5: > > > PCI > > > > > > > bridge, > > > > > > > > > > secondary bus 0000:0d pci 0000:00:1c.5: > > > > > > IO > > > > > > window: > > > > disabled pci > > > > > > > > > > 0000:00:1c.5: MEM window: disabled pci > > > > > > 0000:00:1c.5: > > > > PREFETCH > > > > > > > > > > window: disabled pci 0000:00:1e.0: PCI > > > > bridge, > > > > > secondary > > > > > > > bus > > > > > > > > > 0000:0e pci > > > > > > > > > > > 0000:00:1e.0: IO window: disabled pci > > > > > > 0000:00:1e.0: > > > > MEM > > > > > > > > > window: > > > > > > disabled pci 0000:00:1e.0: PREFETCH > > > > window: > > > disabled pci > > > > > > > > 0000:00:01.0: > > > > > > PCI INT A -> GSI 28 (level, low) -> IRQ > > > > > > 28 > > > > pci > > > > > > 0000:00:02.0: PCI > > > > > > > > > INT A > > > > > > > > > > > -> GSI 29 (level, low) -> IRQ 29 pci > > > > 0000:00:03.0: > > > PCI INT > > > > > > > A -> > > > > > > > > > GSI 24 > > > > > > > > > > > (level, low) -> IRQ 24 pci 0000:00:04.0: > > > > > > PCI > > > > INT A > > > > > -> GSI > > > > > > > 25 > > > > > > > > > (level, > > > > > > > > > > > low) -> IRQ 25 pci 0000:00:05.0: PCI INT > > > > > > A > > > > -> GSI > > > > > 26 > > > > > > > (level, low) > > > > > > > > > -> IRQ > > > > > > > > > > > 26 pci 0000:00:06.0: PCI INT A -> GSI 27 > > > > (level, > > > > > low) -> > > > > > > > IRQ 27 > > > > > > > > > pci > > > > > > > > > > > 0000:00:07.0: PCI INT A -> GSI 30 > > > > > > (level, > > > > low) -> > > > > > IRQ 30 > > > > > > > pci > > > > > > > > > > 0000:00:08.0: PCI INT A -> GSI 31 > > > > > > (level, > > > > low) -> > > > > > IRQ 31 > > > > > > > pci > > > > > > > > > > 0000:00:09.0: PCI INT A -> GSI 32 > > > > > > (level, > > > > low) -> > > > > > IRQ 32 > > > > > > > pci > > > > > > > > > > 0000:00:0a.0: PCI INT A -> GSI 33 > > > > > > (level, > > > > low) -> > > > > > IRQ 33 > > > > > > > pci > > > > > > > > > > 0000:00:1c.0: PCI INT A -> GSI 16 > > > > > > (level, > > > > low) -> > > > > > IRQ 16 > > > > > > > > > xen_allocate_pirq: returning irq 16 for > > > > > > gsi > > > > 16 > > > > > Already > > > > > > > setup the > > > > > > > > > GSI :16 > > > > > > > > > > > pci 0000:00:1c.4: PCI INT A -> GSI 16 > > > > (level, low) > > > > > -> IRQ > > > > > > > 16 pci > > > > > > > > > > 0000:00:1c.5: PCI INT B -> GSI 17 > > > > > > (level, > > > > low) -> > > > > > IRQ 17 > > > > > > > NET: > > > > > Registered > > > > > > > > > > > protocol family 2 IP route cache hash > > > > > > table > > > > > > entries: 65536 > > > > > > > > (order: 7, > > > > > > > > > > > 524288 bytes) TCP established hash table > > > > entries: > > > 262144 > > > > > > > (order: > > > > > 10, > > > > > > > > > > > 4194304 bytes) TCP bind hash table > > > > > > entries: > > > > 65536 > > > > > (order: > > > > 10, > > > > > > > > > 4718592 > > > > > > > > > > > bytes) TCP: Hash tables configured > > > > (established > > > > > 262144 > > > > > > > bind > > > > > > > > > 65536) TCP > > > > > > > > > > > reno registered NET: Registered protocol > > > > family 1 > > > > > pci > > > > > > > > 0000:01:00.0: > > > > > > Disabling L0s pci 0000:01:00.1: > > > > > > Disabling > > > > L0s > > > > > Trying to > > > > > > > unpack > > > > > > > > > rootfs > > > > > > > > > > > image as initramfs... Freeing initrd > > > > > > memory: > > > > 6474k > > > > > freed > > > > > > > DMA-API: > > > > > > preallocated 32768 debug entries > > > > > > DMA-API: > > > > debugging > > > > > > enabled by > > > > > > > > > kernel > > > > > > > > > > > config PCI-DMA: Using software bounce > > > > buffering for > > > > > IO > > > > > > > (SWIOTLB) > > > > > > > > > DMA: > > > > > > Placing 64MB software IO TLB between > > > > > > ffff880007525000 - > > > > > > > > ffff88000b525000 > > > > > > > > > > > DMA: software IO TLB at phys 0x7525000 - > > > > 0xb525000 > > > > > audit: > > > > > initializing > > > > > > > > > > > netlink socket (disabled) type=2000 > > > > > > > > audit(1268750702.035:1): > > > > > initialized > > > > > > > > > > > HugeTLB registered 2 MB page size, > > > > pre-allocated 0 > > > > > pages > > > > > > > VFS: > > > > > Disk > > > > > > > > > > > quotas dquot_6.5.2 Dquot-cache hash > > > > > > table > > > > entries: > > > 512 > > > > > > > (order 0, > > > > > > > > > 4096 > > > > > > > > > > > bytes) msgmni has been set to 2970 > > > > cryptomgr_test > > > > > used > > > > > > > greatest > > > > > > > > > stack > > > > > > > > > > > depth: 5864 bytes left cryptomgr_test > > > > > > used > > > > greatest > > > > > stack > > > > > > > depth: > > > > > 5816 > > > > > > > > > > > bytes left alg: No test for stdrng > > > > > > (krng) > > > > Block > > > > > layer SCSI > > > > > > > > generic (bsg) > > > > > > > > > > > driver version 0.4 loaded (major 252) io > > > > scheduler > > > > > noop > > > > > > > > registered io > > > > > > > > > > > scheduler anticipatory registered io > > > > scheduler > > > > > deadline > > > > > > > > registered io > > > > > > > > > > > scheduler cfq registered (default) > > > > pci_hotplug: PCI > > > > > Hot > > > > > > > Plug PCI > > > > > > > > > Core > > > > > > > > > > > version: 0.5 pciehp 0000:00:09.0:pcie04: > > > > > > HPC > > > > > > vendor_id > > > > > > > 8086 > > > > > > > > > device_id > > > > > > > > > > > 3410 ss_vid 0 ss_did 0 pciehp: PCI > > > > > > Express > > > > Hot Plug > > > > > > Controller > > > > > > > > > Driver > > > > > > > > > > > version: 0.4 acpiphp: ACPI Hot Plug PCI > > > > Controller > > > > > Driver > > > > > > > > version: 0.5 > > > > > > > > > > > acpiphp_glue: Slot 2 already registered > > > > > > by > > > > another > > > > > hotplug > > > > > > > driver > > > > > > > > > > acpiphp_glue: Slot 2 already registered > > > > > > by > > > > another > > > > > hotplug > > > > > > > driver > > > > > > > > > > acpiphp_glue: Slot 2 already registered > > > > > > by > > > > another > > > > > hotplug > > > > > > > driver > > > > > > > > > > acpiphp_glue: Slot 2 already registered > > > > > > by > > > > another > > > > > hotplug > > > > > > > driver > > > > > > > > > > acpiphp_glue: Slot 2 already registered > > > > > > by > > > > another > > > > > hotplug > > > > > > > driver > > > > > > > > > > acpiphp_glue: Slot 2 already registered > > > > > > by > > > > another > > > > > hotplug > > > > > > > driver > > > > > > > > > > acpiphp_glue: Slot 2 already registered > > > > > > by > > > > another > > > > > hotplug > > > > > > > driver > > > > > > > > > > acpiphp_glue: Slot 2 already registered > > > > > > by > > > > another > > > > > hotplug > > > > > > > driver > > > > > > > > > > pci-stub: invalid id string "" input: > > > > > > Sleep > > > > Button > > > > > as > > > > > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 > > > > > > > ACPI: > > > > > Sleep > > > > > > > > > > > Button [SLPB] input: Power Button as > > > > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: > > > Power > > > > > > > Button > > > > > > > > > [PWRF] > > > > > > > > > > > registering netback hpet_acpi_add: no > > > > address or > > > > > irqs in > > > > > > > _CRS > > > > > > > > > > Non-volatile memory driver v1.3 Linux > > > > agpgart > > > > > interface > > > > > > > v0.103 > > > > > > > > > Serial: > > > > > > 8250/16550 driver, 4 ports, IRQ sharing > > > > enabled > > > > > > serial8250: ttyS1 > > > > > > > > > at I/O > > > > > > > > > > > 0x2f8 (irq = 3) is a 16550A brd: module > > > > loaded > > > > > loop: > > > > module > > > > > > > > > loaded > > > > > > > > > > > input: Macintosh mouse button emulation > > > > > > as > > > > > > > > > > /devices/virtual/input/input2 > > > > > > > > > > > ahci 0000:00:1f.2: PCI INT A -> GSI 19 > > > > (level, low) > > > > > -> IRQ > > > > > > > 19 > > > > > > > > > ahci > > > > > > > > > > > 0000:00:1f.2: AHCI 0001.0200 32 slots 6 > > > > ports 3 > > > > > Gbps 0x3f > > > > > > > impl > > > > > > > > > SATA mode > > > > > > > > > > > ahci 0000:00:1f.2: flags: 64bit ncq sntf > > > > > > pm > > > > led clo > > > > > pio > > > > > > > slum part > > > > > > > > > ccc > > > > > > > > > > > ems scsi0 : ahci scsi1 : ahci scsi2 : > > > > > > ahci > > > > scsi3 : > > > ahci > > > > > > > scsi4 : > > > > > ahci > > > > > > > > > > > scsi5 : ahci ata1: SATA max UDMA/133 > > > > irq_stat > > > > > 0x00400040, > > > > > > > > connection > > > > > > > > > > > status changed irq 2996 ata2: SATA max > > > > UDMA/133 > > > > > abar > > > > > > > > m2048@0xb1a00000 > > > > > > > > > > > port 0xb1a00180 irq 2996 ata3: SATA max > > > > UDMA/133 > > > > > abar > > > > > > > > m2048@0xb1a00000 > > > > > > > > > > > port 0xb1a00200 irq 2996 ata4: SATA max > > > > UDMA/133 > > > > > abar > > > > > > > > m2048@0xb1a00000 > > > > > > > > > > > port 0xb1a00280 irq 2996 ata5: SATA max > > > > UDMA/133 > > > > > abar > > > > > > > > m2048@0xb1a00000 > > > > > > > > > > > port 0xb1a00300 irq 2996 ata6: SATA max > > > > UDMA/133 > > > > > abar > > > > > > > > m2048@0xb1a00000 > > > > > > > > > > > port 0xb1a00380 irq 2996 Fixed MDIO Bus: > > > > probed > > > > > ehci_hcd: > > > > USB 2.0 > > > > > > > > > > 'Enhanced' Host Controller (EHCI) Driver > > > > ehci_hcd > > > > > > 0000:00:1a.7: > > > > > PCI INT > > > > > > > > > > > C -> GSI 18 (level, low) -> IRQ 18 > > > > > > ehci_hcd > > > > > > 0000:00:1a.7: > > > > EHCI > > > > > > > > > Host > > > > > > > > > > > Controller ehci_hcd 0000:00:1a.7: new > > > > > > USB > > > > bus > > > > > registered, > > > > > > > > assigned bus > > > > > > > > > > > number 1 ehci_hcd 0000:00:1a.7: debug > > > > > > port 1 > > > > > > ehci_hcd > > > > > > > > 0000:00:1a.7: irq > > > > > > > > > > > 18, io mem 0xb1a02000 ehci_hcd > > > > > > 0000:00:1a.7: > > > > USB > > > > > 2.0 > > > > > > > started, > > > > > > > > > EHCI 1.00 > > > > > > > > > > > usb usb1: New USB device found, > > > > idVendor=1d6b, > > > > > > idProduct=0002 usb > > > > > > > > > usb1: > > > > > > New USB device strings: Mfr=3, > > > > > > Product=2, > > > > > > SerialNumber=1 > > > > > > > usb > > > > > > > > > usb1: > > > > > > Product: EHCI Host Controller usb usb1: > > > > > > Manufacturer: > > > > Linux > > > > > > > > > 2.6.32.9 > > > > > > > > > > > ehci_hcd usb usb1: SerialNumber: > > > > 0000:00:1a.7 usb > > > > > usb1: > > > > > configuration #1 > > > > > > > > > > > chosen from 1 choice hub 1-0:1.0: USB > > > > > > hub > > > > found hub > > > > > > 1-0:1.0: 6 > > > > > > > > > ports > > > > > > > > > > > detected ehci_hcd 0000:00:1d.7: PCI INT > > > > > > A -> > > > > GSI 23 > > > > > > (level, low) > > > > > > > > > -> IRQ > > > > > > > > > > > 23 ehci_hcd 0000:00:1d.7: EHCI Host > > > > Controller > > > > > ehci_hcd > > > > > > > > 0000:00:1d.7: > > > > > > new USB bus registered, assigned bus > > > > > > number > > > > 2 > > > > > ehci_hcd > > > > > > > > 0000:00:1d.7: > > > > > > debug port 1 ehci_hcd 0000:00:1d.7: irq > > > > > > 23, > > > > io mem > > > > > > 0xb1a01000 > > > > > > > > > ehci_hcd > > > > > > > > > > > 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > > > > > > usb > > > > usb2: > > > New USB > > > > > > > device > > > > > > > > > found, > > > > > > > > > > > idVendor=1d6b, idProduct=0002 usb usb2: > > > > > > New > > > > USB > > > > > device > > > > > > > strings: > > > > > Mfr=3, > > > > > > > > > > > Product=2, SerialNumber=1 usb usb2: > > > > > > Product: > > > > EHCI > > > > > Host > > > > > > > Controller > > > > > > > > > usb > > > > > > > > > > > usb2: Manufacturer: Linux 2.6.32.9 > > > > > > ehci_hcd > > > > usb > > > > > usb2: > > > > > SerialNumber: > > > > > > 0000:00:1d.7 usb usb2: configuration #1 > > > > chosen from > > > > > 1 > > > > > > > choice hub > > > > > > > > > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 > > > > > > ports > > > > > > detected > > > > > > > ohci_hcd: > > > > > USB 1.1 > > > > > > > > > > > 'Open' Host Controller (OHCI) Driver > > > > uhci_hcd: USB > > > > > > Universal Host > > > > > > > > > > Controller Interface driver > > > > xen_allocate_pirq: > > > returning > > > > > > > irq 16 > > > > > > > > > for gsi > > > > > > > > > > > 16 Already setup the GSI :16 uhci_hcd > > > > 0000:00:1a.0: > > > PCI > > > > > > > INT A -> > > > > > > > > > GSI 16 > > > > > > > > > > > (level, low) -> IRQ 16 uhci_hcd > > > > 0000:00:1a.0: UHCI > > > > > Host > > > > > > > > Controller > > > > > > > > > > > uhci_hcd 0000:00:1a.0: new USB bus > > > > registered, > > > > > assigned > > > > > > > bus > > > > > > > > > number 3 > > > > > > > > > > > uhci_hcd 0000:00:1a.0: irq 16, io base > > > > 0x000020e0 > > > > > usb > > > > > > > usb3: New > > > > > > > > > USB > > > > > > > > > > > device found, idVendor=1d6b, > > > > > > idProduct=0001 > > > > usb > > > > > usb3: New > > > > > > > USB > > > > > > > > > device > > > > > > > > > > > strings: Mfr=3, Product=2, > > > > > > SerialNumber=1 > > > > usb usb3: > > > > Product: UHCI > > > > > > > > > Host > > > > > > > > > > > Controller usb usb3: Manufacturer: Linux > > > > 2.6.32.9 > > > > > uhci_hcd > > > > > > > usb > > > > > > > > > usb3: > > > > > > SerialNumber: 0000:00:1a.0 usb usb3: > > > > configuration > > > > > #1 > > > > > > > chosen from > > > > > > > > > 1 > > > > > > > > > > > choice hub 3-0:1.0: USB hub found hub > > > > 3-0:1.0: 2 > > > > > ports > > > > > > > detected > > > > > > > > > uhci_hcd > > > > > > > > > > > 0000:00:1a.1: PCI INT B -> GSI 21 > > > > > > (level, > > > > low) -> > > > > > IRQ 21 > > > > > > > uhci_hcd > > > > > > > > > > 0000:00:1a.1: UHCI Host Controller > > > > > > uhci_hcd > > > > > > 0000:00:1a.1: > > > > new USB > > > > > > > > > bus > > > > > > > > > > > registered, assigned bus number 4 > > > > > > uhci_hcd > > > > > > 0000:00:1a.1: > > > > irq 21, > > > > > > > > > io base > > > > > > > > > > > 0x000020c0 usb usb4: New USB device > > > > > > found, > > > > > > idVendor=1d6b, > > > > > > > > idProduct=0001 > > > > > > > > > > > usb usb4: New USB device strings: Mfr=3, > > > > Product=2, > > > > > > > SerialNumber=1 usb > > > > > > > > > > > usb4: Product: UHCI Host Controller usb > > > > usb4: > > > > Manufacturer: Linux > > > > > > > > > > 2.6.32.9 uhci_hcd usb usb4: > > > > > > SerialNumber: > > > > > > 0000:00:1a.1 usb > > > > > > > usb4: > > > > > > configuration #1 chosen from 1 choice > > > > > > hub > > > > 4-0:1.0: > > > USB hub > > > > > > > found > > > > > > > > > hub > > > > > > > > > > > 4-0:1.0: 2 ports detected > > > > > > xen_allocate_pirq: > > > > > > returning irq > > > > > > > 19 for > > > > > > > > > gsi 19 > > > > > > > > > > > Already setup the GSI :19 uhci_hcd > > > > 0000:00:1a.2: > > > PCI INT D > > > > > > > -> GSI > > > > > > > > > 19 > > > > > > > > > > > (level, low) -> IRQ 19 uhci_hcd > > > > 0000:00:1a.2: UHCI > > > > > Host > > > > > > > > Controller > > > > > > > > > > > uhci_hcd 0000:00:1a.2: new USB bus > > > > registered, > > > > > assigned > > > > > > > bus > > > > > > > > > number 5 > > > > > > > > > > > uhci_hcd 0000:00:1a.2: irq 19, io base > > > > 0x000020a0 > > > > > usb > > > > > > > usb5: New > > > > > > > > > USB > > > > > > > > > > > device found, idVendor=1d6b, > > > > > > idProduct=0001 > > > > usb > > > > > usb5: New > > > > > > > USB > > > > > > > > > device > > > > > > > > > > > strings: Mfr=3, Product=2, > > > > > > SerialNumber=1 > > > > usb usb5: > > > > Product: UHCI > > > > > > > > > Host > > > > > > > > > > > Controller usb usb5: Manufacturer: Linux > > > > 2.6.32.9 > > > > > uhci_hcd > > > > > > > usb > > > > > > > > > usb5: > > > > > > SerialNumber: 0000:00:1a.2 usb usb5: > > > > configuration > > > > > #1 > > > > > > > chosen from > > > > > > > > > 1 > > > > > > > > > > > choice hub 5-0:1.0: USB hub found hub > > > > 5-0:1.0: 2 > > > > > ports > > > > > > > detected > > > > > > > > > > xen_allocate_pirq: returning irq 23 for > > > > > > gsi > > > > 23 > > > > > Already > > > > > > > setup the > > > > > > > > > GSI :23 > > > > > > > > > > > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI > > > > > > 23 > > > > (level, > > > > > low) -> > > > > > > > IRQ 23 > > > > > > > > > > uhci_hcd 0000:00:1d.0: UHCI Host > > > > > > Controller > > > > > > uhci_hcd > > > > > > > > 0000:00:1d.0: new > > > > > > > > > > > USB bus registered, assigned bus number > > > > > > 6 > > > > uhci_hcd > > > > > > 0000:00:1d.0: > > > > > irq 23, > > > > > > > > > > > io base 0x00002080 usb usb6: New USB > > > > > > device > > > > found, > > > > > > idVendor=1d6b, > > > > > > > > > > idProduct=0001 usb usb6: New USB device > > > > strings: > > > Mfr=3, > > > > > > > > Product=2, > > > > > > > > > > > SerialNumber=1 usb usb6: Product: UHCI > > > > > > Host > > > > > > Controller usb > > > > > > > usb6: > > > > > > Manufacturer: Linux 2.6.32.9 uhci_hcd > > > > > > usb > > > > usb6: > > > > SerialNumber: > > > > > > 0000:00:1d.0 usb usb6: configuration #1 > > > > chosen from > > > > > 1 > > > > > > > choice hub > > > > > > > > > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 > > > > > > ports > > > > > > detected > > > > > > > > xen_allocate_pirq: > > > > > > returning irq 19 for gsi 19 Already > > > > > > setup > > > > the GSI > > > > > :19 > > > : > > > > uhci_hcd > > > > > > > > > > 0000:00:1d.1: PCI INT B -> GSI 19 > > > > > > (level, > > > > low) -> > > > > > IRQ 19 > > > > > > > uhci_hcd > > > > > > > > > > 0000:00:1d.1: UHCI Host Controller > > > > > > uhci_hcd > > > > > > 0000:00:1d.1: > > > > new USB > > > > > > > > > bus > > > > > > > > > > > registered, assigned bus number 7 > > > > > > uhci_hcd > > > > > > 0000:00:1d.1: > > > > irq 19, > > > > > > > > > io base > > > > > > > > > > > 0x00002060 usb usb7: New USB device > > > > > > found, > > > > > > idVendor=1d6b, > > > > > > > > idProduct=0001 > > > > > > > > > > > usb usb7: New USB device strings: Mfr=3, > > > > Product=2, > > > > > > > SerialNumber=1 usb > > > > > > > > > > > usb7: Product: UHCI Host Controller usb > > > > usb7: > > > > Manufacturer: Linux > > > > > > > > > > 2.6.32.9 uhci_hcd usb usb7: > > > > > > SerialNumber: > > > > > > 0000:00:1d.1 usb > > > > > > > usb7: > > > > > > configuration #1 chosen from 1 choice > > > > > > hub > > > > 7-0:1.0: > > > USB hub > > > > > > > found > > > > > > > > > hub > > > > > > > > > > > 7-0:1.0: 2 ports detected > > > > > > xen_allocate_pirq: > > > > > > returning irq > > > > > > > 18 for > > > > > > > > > gsi 18 > > > > > > > > > > > Already setup the GSI :18 uhci_hcd > > > > 0000:00:1d.2: > > > PCI INT C > > > > > > > -> GSI > > > > > > > > > 18 > > > > > > > > > > > (level, low) -> IRQ 18 uhci_hcd > > > > 0000:00:1d.2: UHCI > > > > > Host > > > > > > > > Controller > > > > > > > > > > > uhci_hcd 0000:00:1d.2: new USB bus > > > > registered, > > > > > assigned > > > > > > > bus > > > > > > > > > number 8 > > > > > > > > > > > uhci_hcd 0000:00:1d.2: irq 18, io base > > > > 0x00002040 > > > > > usb > > > > > > > usb8: New > > > > > > > > > USB > > > > > > > > > > > device found, idVendor=1d6b, > > > > > > idProduct=0001 > > > > usb > > > > > usb8: New > > > > > > > USB > > > > > > > > > device > > > > > > > > > > > strings: Mfr=3, Product=2, > > > > > > SerialNumber=1 > > > > usb usb8: > > > > Product: UHCI > > > > > > > > > Host > > > > > > References > > > > > > Visible links > > > 1. mailto:[20]pasik@iki.fi > > > 2. mailto:[21]pasik@iki.fi > > > 3. mailto:[22]pasik@iki.fi > > > 4. mailto:[23]pasik@iki.fi > > > 5. mailto:[24]pasik@iki.fi > > > 6. > > > > [25]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > 7. > > > > > > [26]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops- > >dom0-xen-stable-x86_64 > > > > > 8. mailto:[27]pasik@iki.fi > > > 9. > > > > [28]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > 10. > > > > > > [29]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops- > >dom0-xen-stable-x86_64 > > > > > 11. mailto:[30]pasik@iki.fi > > > 12. mailto:[31]pasik@iki.fi > > > 13. > > > > [32]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > 14. > > > > > > [33]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops- > >dom0-xen-stable-x86_64 > > > > > 15. mailto:[34]pasik@iki.fi > > > 16. > > > > [35]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > 17. > > > > > > [36]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops- > >dom0-xen-stable-x86_64 > > > > > 18. mailto:[37]pasik@iki.fi > > > > References > > > > Visible links > > 1. mailto:pasik@iki.fi > > 2. mailto:pasik@iki.fi > > 3. mailto:pasik@iki.fi > > 4. mailto:pasik@iki.fi > > 5. mailto:pasik@iki.fi > > 6. mailto:pasik@iki.fi > > 7. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 8. > > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0 > >-xen-stable-x86_64 9. mailto:pasik@iki.fi > > 10. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 11. > > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0 > >-xen-stable-x86_64 12. mailto:pasik@iki.fi > > 13. mailto:pasik@iki.fi > > 14. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 15. > > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0 > >-xen-stable-x86_64 16. mailto:pasik@iki.fi > > 17. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 18. > > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0 > >-xen-stable-x86_64 19. mailto:pasik@iki.fi > > 20. mailto:pasik@iki.fi > > 21. mailto:pasik@iki.fi > > 22. mailto:pasik@iki.fi > > 23. mailto:pasik@iki.fi > > 24. mailto:pasik@iki.fi > > 25. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 26. > > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0 > >-xen-stable-x86_64 27. mailto:pasik@iki.fi > > 28. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 29. > > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0 > >-xen-stable-x86_64 30. mailto:pasik@iki.fi > > 31. mailto:pasik@iki.fi > > 32. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 33. > > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0 > >-xen-stable-x86_64 34. mailto:pasik@iki.fi > > 35. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 36. > > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0 > >-xen-stable-x86_64 37. mailto:pasik@iki.fi > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > ^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 2010-03-23 15:23 ` Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 Tobias Geiger @ 2010-03-23 17:00 ` Jeremy Fitzhardinge 0 siblings, 0 replies; 32+ messages in thread From: Jeremy Fitzhardinge @ 2010-03-23 17:00 UTC (permalink / raw) To: Tobias Geiger; +Cc: xen-devel, kishore kumar, xen-users On 03/23/2010 08:23 AM, Tobias Geiger wrote: > Hi, > > after having almost no issues with hiccups anymore (HPET was disabled in BIOS > - my fault) i also notices the GSI ERRORs regarding GSI 2 and 9 in my dmesg > > xen dmesg: http://pastebin.ca/1850372 > dom0 dmesg: http://pastebin.ca/1850373 > > is this somehow related with the fact that "xenpm get-cpufreq-states" results > in no output at all, and "xenpm set-scaling-governor ondemand" results in: > > [CPU0] failed to set governor name > [CPU1] failed to set governor name > [CPU2] failed to set governor name > [CPU3] failed to set governor name > [CPU4] failed to set governor name > [CPU5] failed to set governor name > [CPU6] failed to set governor name > [CPU7] failed to set governor name > > - i know this (cpufreq) already worked with a 2.6.33 "xenified" dom0-Kernel... > The 2.6.32 based dom0 trees don't have power management yet. J ^ permalink raw reply [flat|nested] 32+ messages in thread
![[-- Attachment #3: Screenshot.png --] [-- Type: image/png, Size: 392691 bytes --]](../../9f975f341003191257h502b6fc8if933ded8107fa96d@mail.gmail.com/3-Screenshot.png){kind=link}
end of thread, other threads:[~2010-03-23 17:00 UTC | newest]
Thread overview: 32+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <9f975f341003121546m7042e458i67822a037076b828@mail.gmail.com>
[not found] ` <20100313001842.GO1878@reaktio.net>
[not found] ` <9f975f341003121641m17e7398cnd2398a3f50a1c78a@mail.gmail.com>
[not found] ` <20100313004730.GR1878@reaktio.net>
[not found] ` <9f975f341003151701u4e8da890ve2c11f5e66a44a93@mail.gmail.com>
[not found] ` <9f975f341003161032p423b5c7cs5bc9bcfb36620033@mail.gmail.com>
[not found] ` <20100316194344.GW1878@reaktio.net>
2010-03-16 19:48 ` pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 Pasi Kärkkäinen
2010-03-16 20:16 ` [Xen-devel] " Jeremy Fitzhardinge
2010-03-16 20:20 ` Re: [Xen-users] " Pasi Kärkkäinen
2010-03-16 21:16 ` [Xen-devel] " kishore kumar
2010-03-16 21:29 ` Re: [Xen-users] " Pasi Kärkkäinen
2010-03-16 21:56 ` [SPAM] Re: [Xen-devel] " kishore kumar
2010-03-16 22:03 ` Pasi Kärkkäinen
2010-03-16 22:22 ` kishore kumar
2010-03-16 22:29 ` Re: [Xen-users] " Pasi Kärkkäinen
2010-03-16 22:40 ` [Xen-devel] " kishore kumar
2010-03-16 23:18 ` Pasi Kärkkäinen
2010-03-17 22:20 ` kishore kumar
2010-03-18 0:34 ` kishore kumar
2010-03-18 16:15 ` Pasi Kärkkäinen
2010-03-18 18:16 ` kishore kumar
2010-03-18 19:31 ` Pasi Kärkkäinen
2010-03-18 20:23 ` kishore kumar
2010-03-18 21:27 ` Pasi Kärkkäinen
2010-03-18 23:56 ` kishore kumar
2010-03-19 17:59 ` [Xen-devel] Re: pvops dom0 kernel: crash in print_all_ICs() Pasi Kärkkäinen
2010-03-19 18:22 ` Re: [Xen-users] " Jeremy Fitzhardinge
2010-03-19 19:05 ` Pasi Kärkkäinen
2010-03-19 19:57 ` [Xen-devel] " kishore kumar
2010-03-19 20:03 ` Pasi Kärkkäinen
2010-03-22 20:23 ` kishore kumar
2010-03-22 20:31 ` Pasi Kärkkäinen
2010-03-22 21:48 ` kishore kumar
2010-03-23 7:04 ` Re: [Xen-users] " Pasi Kärkkäinen
2010-03-19 20:07 ` Konrad Rzeszutek Wilk
2010-03-19 20:45 ` [Xen-devel] " Pasi Kärkkäinen
2010-03-23 15:23 ` Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9 Tobias Geiger
2010-03-23 17:00 ` Jeremy Fitzhardinge
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).