From: kishore kumar <bodkekumar@gmail.com>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: xen-devel@lists.xensource.com, xen-users@lists.xensource.com
Subject: Re: Starting xend: grep: /proc/xen/capabilities: No such file or directory
Date: Tue, 30 Mar 2010 11:33:58 -0700 [thread overview]
Message-ID: <9f975f341003301133p79ed5954kf9010f719a352aef@mail.gmail.com> (raw)
In-Reply-To: <20100327095913.GS1878@reaktio.net>
[-- Attachment #1.1: Type: text/plain, Size: 64584 bytes --]
I disabled network-bridge in /etc/xen/xend-config.sxp file and rebooted the
system. Then I did below steps. After starting xen I manually started
network-bridge. But the network connection could not be established.
Am I doing something wrong here? Are there any other path that needs to be
set ??
Please let me know.
[root@kishore xen]# /etc/init.d/xend start
mount: xenfs already mounted or /proc/xen busy
mount: according to mtab, none is already mounted on /proc/xen
[root@kishore xen]# xm list
Name ID Mem VCPUs State Time(s)
Domain-0 0 1020 12 r----- 91.9
[root@kishore xen]# brctl show
bridge name bridge id STP enabled interfaces
[root@kishore xen]# cd /etc/xen/scripts/
[root@kishore scripts]# ls
blktap block-nbd network-bridge vif-common.sh vtpm vtpm-impl
xen-network-common.sh
block external-device-migrate network-nat vif-nat vtpm-common.sh
vtpm-migration.sh xen-script-common.sh
block-common.sh locking.sh network-route vif-route vtpm-delete
xen-hotplug-cleanup
block-enbd logging.sh vif-bridge vscsi vtpm-hotplug-common.sh
xen-hotplug-common.sh
[root@kishore scripts]# ./network-bridge start
Nothing to flush.
Waiting for peth0 to negotiate link...........(link isnt in running state)
Determining IP information for eth0...PING 192.168.1.1 (192.168.1.1) from
192.168.1.14 eth0: 56(84) bytes of data.
--- 192.168.1.1 ping statistics ---
4 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2999ms
, pipe 3
PING 192.168.1.1 (192.168.1.1) from 192.168.1.13 eth0: 56(84) bytes of data.
--- 192.168.1.1 ping statistics ---
4 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2999ms
, pipe 3
failed.
Nothing to flush.
[root@kishore scripts]#
[root@kishore scripts]#
[root@kishore scripts]# ./network-bridge status
============================================================
4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
link/ether 00:13:20:f7:83:d4 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.14/24 scope global eth0
inet6 fe80::213:20ff:fef7:83d4/64 scope link
valid_lft forever preferred_lft forever
4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
link/ether 00:13:20:f7:83:d4 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.14/24 scope global eth0
inet6 fe80::213:20ff:fef7:83d4/64 scope link
valid_lft forever preferred_lft forever
bridge name bridge id STP enabled interfaces
eth0 8000.001320f783d4 no peth0
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.14
default via 192.168.1.1 dev eth0 proto static
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
============================================================
[root@kishore scripts]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:13:20:F7:83:D4
inet addr:192.168.1.14 Bcast:0.0.0.0 Mask:255.255.255.0
inet6 addr: fe80::213:20ff:fef7:83d4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:160 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:26953 (26.3 KiB)
eth1 Link encap:Ethernet HWaddr 00:13:20:F7:83:D5
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Memory:b1900000-b1920000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:88 errors:0 dropped:0 overruns:0 frame:0
TX packets:88 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:8604 (8.4 KiB) TX bytes:8604 (8.4 KiB)
peth0 Link encap:Ethernet HWaddr 00:13:20:F7:83:D4
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:85 errors:0 dropped:0 overruns:0 frame:0
TX packets:125 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8413 (8.2 KiB) TX bytes:16922 (16.5 KiB)
Memory:b1920000-b1940000
[root@kishore scripts]# ping www.google.com
ping: unknown host www.google.com
[root@kishore scripts]#
On Sat, Mar 27, 2010 at 2:59 AM, Pasi Kärkkäinen <pasik@iki.fi> wrote:
> On Fri, Mar 26, 2010 at 03:04:36PM -0700, kishore kumar wrote:
> > Sure.
> > I think I have iproute but the path is not set.
> >
> > I did PATH=$PATH:/sbin
> >
> > then I did /etc/init.d/xend restart
> > It worked. It did not give me any error messages.
> >
> > Is my xen up and running??
>
> Run "xm info" to check Xen information, and "xm list" to verify running
> domains/guests.
>
> > But the problem is my network is down after I ran /etc/init.d/xend
> > restart.
> >
>
> When xend is started it executes network-script defined in
> /etc/xen/xend-config.sxp.
> As a default it's 'network-bridge', which does all kinds of magic and sets
> up
> a bridge for you, so you can attach guests to it and share the network
> connection with them.
>
> Maybe something goes wrong with that.
>
> You can try disabling (comment out) the network-script line from
> xend-config.sxp and
> reboot.
>
> Then set up the bridges manually, using the methods provided by your dom0
> distribution.
>
> -- Pasi
>
> >
> > On Fri, Mar 26, 2010 at 2:37 PM, Pasi Kärkkäinen <[1]pasik@iki.fi>
> wrote:
> >
> > On Fri, Mar 26, 2010 at 02:04:12PM -0700, kishore kumar wrote:
> > >
> > > OK.Now its giving me another problem. I did below steps.
> > >
> >
> > Ok, this thread doesn't belong to xen-devel at all.
> > Please continue only on xen-users after this.
> >
> > You're missing "ip" command, meaning you don't have iproute
> installed.
> >
> > -- Pasi
> >
> > > [root@localhost kishore]# mount -t xenfs none /proc/xen
> > >
> > > [root@localhost kishore]# mount
> > >
> > > /dev/mapper/VolGroup00-LogVol00 on / type ext3 (rw)
> > >
> > > proc on /proc type proc (rw)
> > >
> > > sysfs on /sys type sysfs (rw)
> > >
> > > devpts on /dev/pts type devpts (rw,gid=5,mode=620)
> > >
> > > /dev/sda1 on /boot type ext3 (rw)
> > >
> > > tmpfs on /dev/shm type tmpfs (rw)
> > >
> > > none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
> > >
> > > sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
> > >
> > > none on /proc/xen type xenfs (rw)
> > >
> > >
> > >
> > > [root@localhost xen]# /sbin/modprobe xen-evtchn
> > >
> > > [root@localhost kishore]# PATH=$PATH:/usr/sbin
> > >
> > > [root@localhost kishore]# /etc/init.d/xend start
> > >
> > > mount: xenfs already mounted or /proc/xen busy
> > >
> > > mount: according to mtab, none is already mounted on /proc/xen
> > >
> > > /etc/xen/scripts/network-bridge: line 87: ip: command not found
> > >
> > > /etc/xen/scripts/network-bridge: line 126: ip: command not
> found
> > >
> > > /etc/xen/scripts/network-bridge: line 132: ip: command not
> found
> > >
> > > /etc/xen/scripts/network-bridge: line 139: ip: command not
> found
> > >
> > > /etc/xen/scripts/network-bridge: line 104: ip: command not
> found
> > >
> > > /etc/xen/scripts/network-bridge: line 105: ip: command not
> found
> > >
> > > /etc/xen/scripts/network-bridge: line 233: ip: command not
> found
> > >
> > > /etc/xen/scripts/network-bridge: line 87: ip: command not found
> > >
> > > /etc/xen/scripts/network-bridge: line 126: ip: command not
> found
> > >
> > > /etc/xen/scripts/network-bridge: line 132: ip: command not
> found
> > >
> > > /etc/xen/scripts/network-bridge: line 139: ip: command not
> found
> > >
> > > /etc/xen/scripts/network-bridge: line 104: ip: command not
> found
> > >
> > > /etc/xen/scripts/network-bridge: line 105: ip: command not
> found
> > >
> > > /etc/xen/scripts/network-bridge: line 233: ip: command not
> found
> > >
> > >
> > >
> > > On Fri, Mar 26, 2010 at 11:17 AM, Pasi Kärkkäinen
> > <[1][2]pasik@iki.fi> wrote:
> > >
> > > On Fri, Mar 26, 2010 at 11:12:24AM -0700, kishore kumar
> wrote:
> > > > my SELINUX and Firewall both are disabled.
> > > >
> > > > I dont have /usr/sbin in my PATH.
> > >
> > > And that's the problem here.
> > > > should I add it in my $HOME/.bashrc??
> > > >
> > > > or do we need to edit /etc/bashrc or /etc/profile??
> > > >
> > >
> > > It's all up to you.
> > >
> > > -- Pasi
> > > > Please let me know.
> > > > Thanks
> > > >
> > > >
> > > >
> > > > On Fri, Mar 26, 2010 at 10:26 AM, Pasi Kärkkäinen
> > > <[1][2][3]pasik@iki.fi> wrote:
> > > >
> > > > On Fri, Mar 26, 2010 at 09:46:55AM -0700, kishore
> kumar
> > wrote:
> > > > > Does it means the Xen did not get installed
> > properly??
> > > > >
> > > > > I pulled 3.4-testing.hg and did
> > > > > make xen
> > > > > make tools
> > > > > make stubdom
> > > > > make install-xen
> > > > > make install-tools
> > > > > make install-stubdom
> > > > > Is there something that I am missing in compiling
> and
> > > installing
> > > > xen?
> > > > > where will the xend daemon binary be installed?
> > > > >
> > > > > I see it in /etc/init.d/xend
> > > > > and
> > > > > /usr/sbin/xend.
> > > > >
> > > >
> > > > Is /usr/sbin/ on your PATH?
> > > > /etc/init.d/xend was complaining that it can't find
> "xend"
> > > binary..
> > > >
> > > > Do you have selinux? Try turning it off and rebooting?
> > > >
> > > > -- Pasi
> > > > >
> > > > > On Thu, Mar 25, 2010 at 11:58 PM, Pasi Kärkkäinen
> > > > <[1][2][3][4]pasik@iki.fi> wrote:
> > > > >
> > > > > On Thu, Mar 25, 2010 at 07:38:31PM -0700,
> kishore
> > kumar
> > > wrote:
> > > > > > I could not get anything out of it.
> Attached
> > is the
> > > xend
> > > > file.
> > > > > >
> > > > > > can you please let me know?
> > > > > >
> > > > >
> > > > > Based on the errors and the xend you sent it
> looks
> > like
> > > you don't
> > > > > have the actual 'xend' daemon binary installed
> on
> > your
> > > system
> > > > path.
> > > > >
> > > > > -- Pasi
> > > > >
> > > > > > Thanks
> > > > > >
> > > > > >
> > > > > > On Wed, Mar 24, 2010 at 12:29 AM, Pasi
> > Kärkkäinen
> > > > > <[1][2][3][4][5]pasik@iki.fi> wrote:
> > > > > >
> > > > > > On Tue, Mar 23, 2010 at 03:46:15PM
> -0700,
> > kishore
> > > kumar
> > > > wrote:
> > > > > > > which init-script?
> > > > > > >
> > > > > >
> > > > > > /etc/init.d/xend
> > > > > >
> > > > > > -- Pasi
> > > > > > > On Tue, Mar 23, 2010 at 3:11 PM,
> Pasi
> > > Kärkkäinen
> > > > > > <[1][2][3][4][5][6]pasik@iki.fi> wrote:
> > > > > > >
> > > > > > > On Tue, Mar 23, 2010 at
> 02:42:32PM
> > -0700,
> > > kishore
> > > > kumar
> > > > > wrote:
> > > > > > > > Any suggestions on this
> please??
> > > > > > > >
> > > > > > >
> > > > > > > "xend: command not found" sounds
> like
> > > there's
> > > > something
> > > > > wrong
> > > > > > > with your xen tools installation.
> > > > > > >
> > > > > > > Do you actually have xend
> installed?
> > > > > > >
> > > > > > > Also please read the lines 53,
> 40,
> > and 45
> > > from the
> > > > > init-script
> > > > > > > to see what's on those lines.
> > > > > > >
> > > > > > > -- Pasi
> > > > > > >
> > > > > > > > On Tue, Mar 23, 2010 at 1:30
> PM,
> > > kishore kumar
> > > > > > >
> > <[1][2][3][4][5][6][7]bodkekumar@gmail.com>
> > > > > > > > wrote:
> > > > > > > >
> > > > > > > > cat /proc/xen/capabilities
> > gives me
> > > > > > > >
> > > > > > > > control_d
> > > > > > > > /etc/init.d/xend start
> gives
> > me
> > > > > > > >
> > > > > > > > mount: xenfs already
> mounted
> > or
> > > /proc/xen
> > > > busy
> > > > > > > > mount: according to mtab,
> none
> > is
> > > already
> > > > mounted
> > > > > on
> > > > > > /proc/xen
> > > > > > > > /etc/init.d/xend: line53:
> > xend:
> > > command not
> > > > found
> > > > > > > > /etc/init.d/xend: line40:
> > xend:
> > > command not
> > > > found
> > > > > > > > /etc/init.d/xend: line45:
> > xend:
> > > command not
> > > > found
> > > > > > > > On Tue, Mar 23, 2010 at
> 1:16
> > PM, Pasi
> > > > Kärkkäinen
> > > > > > > <[2][3][4][5][6][7][8]
> pasik@iki.fi>
> > > > > > > > wrote:
> > > > > > > >
> > > > > > > > On Tue, Mar 23, 2010 at
> > 01:11:14PM
> > > -0700,
> > > > kishore
> > > > > kumar
> > > > > > wrote:
> > > > > > > > > Yes. I see below
> in
> > /proc/xen
> > > after
> > > > mount
> > > > > > > > >
> > > > > > > > > capabilities
> > > > > > > > > privcmd
> > > > > > > > > xenbus
> > > > > > > > > xsd_kva
> > > > > > > > > xsd_port.
> > > > > > > > >
> > > > > > > >
> > > > > > > > Looks ok.. What does
> "cat
> > > > /proc/xen/capabilities"
> > > > > say ?
> > > > > > > >
> > > > > > > > Does "/etc/init.d/xend
> > start" work?
> > > > > > > >
> > > > > > > > -- Pasi
> > > > > > > > > On Tue, Mar 23,
> 2010 at
> > 1:05
> > > PM, Pasi
> > > > > Kärkkäinen
> > > > > > > >
> > <[1][3][4][5][6][7][8][9]pasik@iki.fi>
> > > wrote:
> > > > > > > > >
> > > > > > > > > On Tue, Mar 23,
> 2010
> > at
> > > 01:04:34PM
> > > > -0700,
> > > > > kishore
> > > > > > kumar
> > > > > > > wrote:
> > > > > > > > > > attached is
> the
> > screen
> > > shot.
> > > > > > > > > >
> > > > > > > > > > I did
> > > > > > > > > > cd
> > > > > > >
> > > > >
> > >
> > /lib/modules/[1][2][4][5][6][7][8][9][10]
> 2.6.32.10/kernel/drivers/xen
> > > > > > > > > > modprobe
> > xen-evtchn
> > > > > > > > > >
> > > > > > > > > > and then did
> > > > > > > > > >
> > > > > > > > > > mount -t
> xenfs
> > none
> > > > /proc/xen.
> > > > > > > > > >
> > > > > > > > > > But still
> the
> > same
> > > problem.
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > > Does the mount
> > succeed? Is
> > > there
> > > > anything
> > > > > under
> > > > > > > /proc/xen?
> > > > > > > > >
> > > > > > > > > -- Pasi
> > > > > > > > > > On Tue, Mar
> 23,
> > 2010 at
> > > 12:51
> > > > PM,
> > > > > Pasi
> > > > > > Kärkkäinen
> > > > > > > > >
> > > <[2][3][5][6][7][8][9][10][11]pasik@iki.fi>
> > > > wrote:
> > > > > > > > > >
> > > > > > > > > > On Tue,
> Mar
> > 23, 2010
> > > at
> > > > 12:43:16PM
> > > > > -0700,
> > > > > > kishore
> > > > > > > kumar
> > > > > > > > wrote:
> > > > > > > > > > > I
> have
> > the Xen
> > > > 3.4.3.rc4
> > > > > installed
> > > > > > alone
> > > > > > > with
> > > > > > > > > > >
> > > > > > > > > > > make
> xen
> > > > > > > > > > >
> > > > > > > > > > > make
> > stubdom,
> > > > > > > > > > >
> > > > > > > > > > > make
> > tools
> > > > > > > > > > >
> > > > > > > > > > > make
> > install-xen
> > > > > > > > > > > make
> > > install-tools
> > > > > > > > > > > make
> > > install-stubdom
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > and
> > pulled dom 0
> > > kernel
> > > > from
> > > > > > > > > > >
> > > > > > > > > > > git
> clone
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > git://[1][3][4][6][7][8][9][10][11][12]
> git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > > > > > and
> > compiled the
> > > > kernel.
> > > > > > > > > > >
> > > > > > > > > > >
> modified
> > the
> > > grub.conf
> > > > as
> > > > > below
> > > > > > > > > > >
> > > > > > > > > > > title
> > > xen/pvops
> > > > > (2.6.32.10)
> > > > > > > > > > > root
> > > (hd0,0)
> > > > > > > > > > >
> kernel
> > > /xen.gz
> > > > > loglvl=all
> > > > > > > guest_loglvl=all
> > > > > > > > > sync_console
> > > > > > > > > > >
> > console_to_ring
> > > > > com1=115200,8n1
> > > > > > > console=vga,com1
> > > > > > > > lapic=debug
> > > > > > > > > > >
> > > apic_verbosity=debug
> > > > > apic=debug
> > > > > > iommu=1
> > > > > > > msi=1
> > > > > > > > > > >
> module
> > > > > /vmlinuz-2.6.32.10 ro
> > > > > > > > >
> > > root=/dev/VolGroup01/LogVol00
> > > > > > > > > > >
> > console=hvc0
> > > > earlyprintk=xen
> > > > > > nomodeset
> > > > > > > > initcall_debug debug
> > > > > > > > > >
> loglevel=10
> > > > > > > > > > >
> module
> > > > > /initrd-2.6.32.10.img
> > > > > > > > > > >
> > > > > > > > > > > and
> > rebooted the
> > > > machine. I
> > > > > hope
> > > > > > this is a
> > > > > > > Xen+
> > > > > > > > dom0.
> > > > > > > > > Please
> > > > > > > > > > correct me
> > > > > > > > > > > if I
> am
> > wrong
> > > here.
> > > > > > > > > > >
> > > > > > > > > > > After
> > reboot I
> > > see
> > > > > > > > > > >
> Starting
> > xend:
> > > grep:
> > > > > > > /proc/xen/capabilities: No
> > > > > > > > such file
> > > > > > > > > or
> > > > > > > > > > directory
> > > > > > > > > > >
> > > > > > > > > > > I
> added
> > none
> > > /proc/xen
> > > > xenfs
> > > > > defaults
> > > > > > 0 0
> > > > > > > in
> > > > > > > > /etc/fstab
> > > > > > > > > file and
> > > > > > > > > > >
> rebooted.
> > still
> > > the
> > > > same
> > > > > problem.
> > > > > > > > > > >
> > > > > > > > > > > Is
> there
> > > anything else
> > > > that
> > > > > needs to
> > > > > > be
> > > > > > > done?
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > So is that
> > version of
> > > xend
> > > > > automatically
> > > > > > loading
> > > > > > > > xen-evtchn.ko
> > > > > > > > > driver
> > > > > > > > > > module?
> > > > > > > > > > Try
> loading
> > the
> > > module with
> > > > > "modprobe
> > > > > > xen-evtchn"
> > > > > > > and
> > > > > > > > then try
> > > > > > > > > mounting
> > > > > > > > > > the
> /proc/xen.
> > > > > > > > > > > Am I
> > booted with
> > > > Xen+dom0 or
> > > > > just the
> > > > > > linux
> > > > > > > kernel?
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Most
> probably
> > to
> > > Xen+dom0,
> > > > if you
> > > > > chose
> > > > > > the grub
> > > > > > > entry
> > > > > > > > you pasted
> > > > > > > > > above.
> > > > > > > > > >
> > > > > > > > > > -- Pasi
> > > > > > > > > > > My
> uname
> > -a is
> > > > > > > > > > >
> > > > > > > > > > > Linux
> > > > localhost.localdomain
> > > > > 2.6.32.10
> > > > > > > > > > >
> > > > > > > > > > >
> Thanks
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > On
> Tue,
> > Mar 23,
> > > 2010 at
> > > > 12:23
> > > > > AM,
> > > > > > Pasi
> > > > > > > Kärkkäinen
> > > > > > > > > >
> > > > > <[2][4][5][7][8][9][10][11][12][13]
> pasik@iki.fi>
> > wrote:
> > > > > > > > > > >
> > > > > > > > > > > On
> Mon,
> > Mar
> > > 22, 2010
> > > > at
> > > > > 05:00:41PM
> > > > > > -0700,
> > > > > > > kishore
> > > > > > > > kumar
> > > > > > > > > wrote:
> > > > > > > > > > > >
> Hi
> > all,
> > > > > > > > > > > >
> > > > > > > > > > > >
> I
> > see the
> > > below
> > > > message
> > > > > after
> > > > > > I
> > > > > > > install
> > > > > > > > xen3.4.3-rc4
> > > > > > > > > and
> > > > > > > > > > pvops dom
> > > > > > > > > > > 0
> > > > > > > > > > > >
> > kernel
> > > 2.6.32.10
> > > > and
> > > > > reboot
> > > > > > the
> > > > > > > machine.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > Starting
> > > xend:
> > > > grep:
> > > > > > > > /proc/xen/capabilities:
> No
> > such
> > > > > > > > > file
> > > > > > > > > > or
> > > > > > > > > > >
> > directory
> > > > > > > > > > > >
> > > > > > > > > > > >
> I
> > did
> > > below
> > > > steps too.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > step 1:
> > > insmod
> > > > > xen-evtchn.ko
> > > > > > > > > > > >
> > step 2:
> > > Added
> > > > none
> > > > > /proc/xen
> > > > > > xenfs
> > > > > > > defaults
> > > > > > > > 0 0 in
> > > > > > > > > > /etc/fstab
> > > > > > > > > > >
> file.
> > > > > > > > > > > >
> > > > > > > > > > > >
> Is
> > there
> > > > something that
> > > > > I am
> > > > > > missing
> > > > > > > here?
> > > > > > > > > > >
> > > > > > > > > > >
> Well
> > then
> > > actually
> > > > mount
> > > > > /proc/xen
> > > > > > :)
> > > > > > > > > > > (or
> > reboot).
> > > > > > > > > > >
> > > > > > > > > > >
> Also
> > did you
> > > verify
> > > > you've
> > > > > actually
> > > > > > > rebooted to
> > > > > > > > Xen+dom0?
> > > > > > > > > > > --
> Pasi
> > > > > > > > > > >
> > > > > > > > > > >
> References
> > > > > > > > > > >
> > > > > > > > > > >
> Visible
> > links
> > > > > > > > > > > 1.
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > [5][6][8][9][10][11][12][13][14]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > > > > > 2.
> > > > > >
> > mailto:[6][7][9][10][11][12][13][14][15]pasik@iki.fi
> > > > > > > > > >
> > > > > > > > > > References
> > > > > > > > > >
> > > > > > > > > > Visible
> links
> > > > > > > > > > 1.
> > > > > >
> > >
> > [8][10][11][12][13][14][15][16]http://2.6.32.10/kernel/drivers/xen
> > > > > > > > > > 2.
> > > > > mailto:[9][11][12][13][14][15][16][17]
> pasik@iki.fi
> > > > > > > > > > 3.
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > [10][12][13][14][15][16][17][18]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > > > > 4.
> > > > > mailto:[11][13][14][15][16][17][18][19]
> pasik@iki.fi
> > > > > > > > > > 5.
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > [12][14][15][16][17][18][19][20]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > > > > 6.
> > > > > mailto:[13][15][16][17][18][19][20][21]
> pasik@iki.fi
> > > > > > > > >
> > > > > > > > > References
> > > > > > > > >
> > > > > > > > > Visible links
> > > > > > > > > 1.
> > > > mailto:[16][17][18][19][20][21][22]pasik@iki.fi
> > > > > > > > > 2.
> > > > >
> > > [17][18][19][20][21][22][23]
> http://2.6.32.10/kernel/drivers/xen
> > > > > > > > > 3.
> > > > mailto:[18][19][20][21][22][23][24]pasik@iki.fi
> > > > > > > > > 4.
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > [19][20][21][22][23][24][25]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > > > 5.
> > > > mailto:[20][21][22][23][24][25][26]pasik@iki.fi
> > > > > > > > > 6.
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > [21][22][23][24][25][26][27]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > > > 7.
> > > > mailto:[22][23][24][25][26][27][28]pasik@iki.fi
> > > > > > > > > 8.
> > > > >
> > > [23][24][25][26][27][28][29]
> http://2.6.32.10/kernel/drivers/xen
> > > > > > > > > 9.
> > > > mailto:[24][25][26][27][28][29][30]pasik@iki.fi
> > > > > > > > > 10.
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > [25][26][27][28][29][30][31]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > > > 11.
> > > > mailto:[26][27][28][29][30][31][32]pasik@iki.fi
> > > > > > > > > 12.
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > [27][28][29][30][31][32][33]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > > > 13.
> > > > mailto:[28][29][30][31][32][33][34]pasik@iki.fi
> > > > > > > >
> > > > > > > > References
> > > > > > > >
> > > > > > > > Visible links
> > > > > > > > 1.
> > > mailto:[30][31][32][33][34][35]bodkekumar@gmail.com
> > > > > > > > 2.
> > > mailto:[31][32][33][34][35][36]pasik@iki.fi
> > > > > > > > 3.
> > > mailto:[32][33][34][35][36][37]pasik@iki.fi
> > > > > > > > 4.
> > > >
> > [33][34][35][36][37][38]http://2.6.32.10/kernel/drivers/xen
> > > > > > > > 5.
> > > mailto:[34][35][36][37][38][39]pasik@iki.fi
> > > > > > > > 6.
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > [35][36][37][38][39][40]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > > 7.
> > > mailto:[36][37][38][39][40][41]pasik@iki.fi
> > > > > > > > 8.
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > [37][38][39][40][41][42]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > > 9.
> > > mailto:[38][39][40][41][42][43]pasik@iki.fi
> > > > > > > > 10.
> > > >
> > [39][40][41][42][43][44]http://2.6.32.10/kernel/drivers/xen
> > > > > > > > 11.
> > > mailto:[40][41][42][43][44][45]pasik@iki.fi
> > > > > > > > 12.
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > [41][42][43][44][45][46]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > > 13.
> > > mailto:[42][43][44][45][46][47]pasik@iki.fi
> > > > > > > > 14.
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > [43][44][45][46][47][48]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > > 15.
> > > mailto:[44][45][46][47][48][49]pasik@iki.fi
> > > > > > > > 16.
> > > mailto:[45][46][47][48][49][50]pasik@iki.fi
> > > > > > > > 17.
> > > >
> > [46][47][48][49][50][51]http://2.6.32.10/kernel/drivers/xen
> > > > > > > > 18.
> > > mailto:[47][48][49][50][51][52]pasik@iki.fi
> > > > > > > > 19.
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > [48][49][50][51][52][53]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > > 20.
> > > mailto:[49][50][51][52][53][54]pasik@iki.fi
> > > > > > > > 21.
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > [50][51][52][53][54][55]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > > 22.
> > > mailto:[51][52][53][54][55][56]pasik@iki.fi
> > > > > > > > 23.
> > > >
> > [52][53][54][55][56][57]http://2.6.32.10/kernel/drivers/xen
> > > > > > > > 24.
> > > mailto:[53][54][55][56][57][58]pasik@iki.fi
> > > > > > > > 25.
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > [54][55][56][57][58][59]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > > 26.
> > > mailto:[55][56][57][58][59][60]pasik@iki.fi
> > > > > > > > 27.
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > [56][57][58][59][60][61]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > > 28.
> > > mailto:[57][58][59][60][61][62]pasik@iki.fi
> > > > > > >
> > > > > > > References
> > > > > > >
> > > > > > > Visible links
> > > > > > > 1.
> > mailto:[59][60][61][62][63]pasik@iki.fi
> > > > > > > 2.
> > mailto:[60][61][62][63][64]bodkekumar@gmail.com
> > > > > > > 3.
> > mailto:[61][62][63][64][65]pasik@iki.fi
> > > > > > > 4.
> > mailto:[62][63][64][65][66]pasik@iki.fi
> > > > > > > 5.
> > > [63][64][65][66][67]http://2.6.32.10/kernel/drivers/xen
> > > > > > > 6.
> > mailto:[64][65][66][67][68]pasik@iki.fi
> > > > > > > 7.
> > > > > >
> > > > >
> > > >
> > >
> > [65][66][67][68][69]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > 8.
> > mailto:[66][67][68][69][70]pasik@iki.fi
> > > > > > > 9.
> > > > > >
> > > > >
> > > >
> > >
> > [67][68][69][70][71]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > 10.
> > mailto:[68][69][70][71][72]pasik@iki.fi
> > > > > > > 11.
> > > [69][70][71][72][73]http://2.6.32.10/kernel/drivers/xen
> > > > > > > 12.
> > mailto:[70][71][72][73][74]pasik@iki.fi
> > > > > > > 13.
> > > > > >
> > > > >
> > > >
> > >
> > [71][72][73][74][75]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > 14.
> > mailto:[72][73][74][75][76]pasik@iki.fi
> > > > > > > 15.
> > > > > >
> > > > >
> > > >
> > >
> > [73][74][75][76][77]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > 16.
> > mailto:[74][75][76][77][78]pasik@iki.fi
> > > > > > > 17.
> > mailto:[75][76][77][78][79]pasik@iki.fi
> > > > > > > 18.
> > > [76][77][78][79][80]http://2.6.32.10/kernel/drivers/xen
> > > > > > > 19.
> > mailto:[77][78][79][80][81]pasik@iki.fi
> > > > > > > 20.
> > > > > >
> > > > >
> > > >
> > >
> > [78][79][80][81][82]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > 21.
> > mailto:[79][80][81][82][83]pasik@iki.fi
> > > > > > > 22.
> > > > > >
> > > > >
> > > >
> > >
> > [80][81][82][83][84]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > 23.
> > mailto:[81][82][83][84][85]pasik@iki.fi
> > > > > > > 24.
> > > [82][83][84][85][86]http://2.6.32.10/kernel/drivers/xen
> > > > > > > 25.
> > mailto:[83][84][85][86][87]pasik@iki.fi
> > > > > > > 26.
> > > > > >
> > > > >
> > > >
> > >
> > [84][85][86][87][88]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > 27.
> > mailto:[85][86][87][88][89]pasik@iki.fi
> > > > > > > 28.
> > > > > >
> > > > >
> > > >
> > >
> > [86][87][88][89][90]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > 29.
> > mailto:[87][88][89][90][91]pasik@iki.fi
> > > > > > > 30.
> > mailto:[88][89][90][91][92]bodkekumar@gmail.com
> > > > > > > 31.
> > mailto:[89][90][91][92][93]pasik@iki.fi
> > > > > > > 32.
> > mailto:[90][91][92][93][94]pasik@iki.fi
> > > > > > > 33.
> > > [91][92][93][94][95]http://2.6.32.10/kernel/drivers/xen
> > > > > > > 34.
> > mailto:[92][93][94][95][96]pasik@iki.fi
> > > > > > > 35.
> > > > > >
> > > > >
> > > >
> > >
> > [93][94][95][96][97]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > 36.
> > mailto:[94][95][96][97][98]pasik@iki.fi
> > > > > > > 37.
> > > > > >
> > > > >
> > > >
> > >
> > [95][96][97][98][99]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > 38.
> > mailto:[96][97][98][99][100]pasik@iki.fi
> > > > > > > 39.
> > > [97][98][99][100][101]http://2.6.32.10/kernel/drivers/xen
> > > > > > > 40.
> > mailto:[98][99][100][101][102]pasik@iki.fi
> > > > > > > 41.
> > > > > >
> > > > >
> > > >
> > >
> > [99][100][101][102][103]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > 42.
> > mailto:[100][101][102][103][104]pasik@iki.fi
> > > > > > > 43.
> > > > > >
> > > > >
> > > >
> > >
> > [101][102][103][104][105]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > 44.
> > mailto:[102][103][104][105][106]pasik@iki.fi
> > > > > > > 45.
> > mailto:[103][104][105][106][107]pasik@iki.fi
> > > > > > > 46.
> > > [104][105][106][107][108]http://2.6.32.10/kernel/drivers/xen
> > > > > > > 47.
> > mailto:[105][106][107][108][109]pasik@iki.fi
> > > > > > > 48.
> > > > > >
> > > > >
> > > >
> > >
> > [106][107][108][109][110]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > 49.
> > mailto:[107][108][109][110][111]pasik@iki.fi
> > > > > > > 50.
> > > > > >
> > > > >
> > > >
> > >
> > [108][109][110][111][112]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > 51.
> > mailto:[109][110][111][112][113]pasik@iki.fi
> > > > > > > 52.
> > > [110][111][112][113][114]http://2.6.32.10/kernel/drivers/xen
> > > > > > > 53.
> > mailto:[111][112][113][114][115]pasik@iki.fi
> > > > > > > 54.
> > > > > >
> > > > >
> > > >
> > >
> > [112][113][114][115][116]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > 55.
> > mailto:[113][114][115][116][117]pasik@iki.fi
> > > > > > > 56.
> > > > > >
> > > > >
> > > >
> > >
> > [114][115][116][117][118]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > 57.
> > mailto:[115][116][117][118][119]pasik@iki.fi
> > > > > >
> > > > > > References
> > > > > >
> > > > > > Visible links
> > > > > > 1. mailto:[117][118][119][120]
> pasik@iki.fi
> > > > > > 2. mailto:[118][119][120][121]
> pasik@iki.fi
> > > > > > 3.
> > mailto:[119][120][121][122]bodkekumar@gmail.com
> > > > > > 4. mailto:[120][121][122][123]
> pasik@iki.fi
> > > > > > 5. mailto:[121][122][123][124]
> pasik@iki.fi
> > > > > > 6.
> > [122][123][124][125]http://2.6.32.10/kernel/drivers/xen
> > > > > > 7. mailto:[123][124][125][126]
> pasik@iki.fi
> > > > > > 8.
> > > > >
> > > >
> > >
> > [124][125][126][127]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 9. mailto:[125][126][127][128]
> pasik@iki.fi
> > > > > > 10.
> > > > >
> > > >
> > >
> > [126][127][128][129]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 11. mailto:[127][128][129][130]
> pasik@iki.fi
> > > > > > 12.
> > [128][129][130][131]http://2.6.32.10/kernel/drivers/xen
> > > > > > 13. mailto:[129][130][131][132]
> pasik@iki.fi
> > > > > > 14.
> > > > >
> > > >
> > >
> > [130][131][132][133]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 15. mailto:[131][132][133][134]
> pasik@iki.fi
> > > > > > 16.
> > > > >
> > > >
> > >
> > [132][133][134][135]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 17. mailto:[133][134][135][136]
> pasik@iki.fi
> > > > > > 18. mailto:[134][135][136][137]
> pasik@iki.fi
> > > > > > 19.
> > [135][136][137][138]http://2.6.32.10/kernel/drivers/xen
> > > > > > 20. mailto:[136][137][138][139]
> pasik@iki.fi
> > > > > > 21.
> > > > >
> > > >
> > >
> > [137][138][139][140]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 22. mailto:[138][139][140][141]
> pasik@iki.fi
> > > > > > 23.
> > > > >
> > > >
> > >
> > [139][140][141][142]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 24. mailto:[140][141][142][143]
> pasik@iki.fi
> > > > > > 25.
> > [141][142][143][144]http://2.6.32.10/kernel/drivers/xen
> > > > > > 26. mailto:[142][143][144][145]
> pasik@iki.fi
> > > > > > 27.
> > > > >
> > > >
> > >
> > [143][144][145][146]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 28. mailto:[144][145][146][147]
> pasik@iki.fi
> > > > > > 29.
> > > > >
> > > >
> > >
> > [145][146][147][148]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 30. mailto:[146][147][148][149]
> pasik@iki.fi
> > > > > > 31.
> > mailto:[147][148][149][150]bodkekumar@gmail.com
> > > > > > 32. mailto:[148][149][150][151]
> pasik@iki.fi
> > > > > > 33. mailto:[149][150][151][152]
> pasik@iki.fi
> > > > > > 34.
> > [150][151][152][153]http://2.6.32.10/kernel/drivers/xen
> > > > > > 35. mailto:[151][152][153][154]
> pasik@iki.fi
> > > > > > 36.
> > > > >
> > > >
> > >
> > [152][153][154][155]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 37. mailto:[153][154][155][156]
> pasik@iki.fi
> > > > > > 38.
> > > > >
> > > >
> > >
> > [154][155][156][157]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 39. mailto:[155][156][157][158]
> pasik@iki.fi
> > > > > > 40.
> > [156][157][158][159]http://2.6.32.10/kernel/drivers/xen
> > > > > > 41. mailto:[157][158][159][160]
> pasik@iki.fi
> > > > > > 42.
> > > > >
> > > >
> > >
> > [158][159][160][161]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 43. mailto:[159][160][161][162]
> pasik@iki.fi
> > > > > > 44.
> > > > >
> > > >
> > >
> > [160][161][162][163]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 45. mailto:[161][162][163][164]
> pasik@iki.fi
> > > > > > 46. mailto:[162][163][164][165]
> pasik@iki.fi
> > > > > > 47.
> > [163][164][165][166]http://2.6.32.10/kernel/drivers/xen
> > > > > > 48. mailto:[164][165][166][167]
> pasik@iki.fi
> > > > > > 49.
> > > > >
> > > >
> > >
> > [165][166][167][168]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 50. mailto:[166][167][168][169]
> pasik@iki.fi
> > > > > > 51.
> > > > >
> > > >
> > >
> > [167][168][169][170]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 52. mailto:[168][169][170][171]
> pasik@iki.fi
> > > > > > 53.
> > [169][170][171][172]http://2.6.32.10/kernel/drivers/xen
> > > > > > 54. mailto:[170][171][172][173]
> pasik@iki.fi
> > > > > > 55.
> > > > >
> > > >
> > >
> > [171][172][173][174]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 56. mailto:[172][173][174][175]
> pasik@iki.fi
> > > > > > 57.
> > > > >
> > > >
> > >
> > [173][174][175][176]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 58. mailto:[174][175][176][177]
> pasik@iki.fi
> > > > > > 59. mailto:[175][176][177][178]
> pasik@iki.fi
> > > > > > 60.
> > mailto:[176][177][178][179]bodkekumar@gmail.com
> > > > > > 61. mailto:[177][178][179][180]
> pasik@iki.fi
> > > > > > 62. mailto:[178][179][180][181]
> pasik@iki.fi
> > > > > > 63.
> > [179][180][181][182]http://2.6.32.10/kernel/drivers/xen
> > > > > > 64. mailto:[180][181][182][183]
> pasik@iki.fi
> > > > > > 65.
> > > > >
> > > >
> > >
> > [181][182][183][184]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 66. mailto:[182][183][184][185]
> pasik@iki.fi
> > > > > > 67.
> > > > >
> > > >
> > >
> > [183][184][185][186]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 68. mailto:[184][185][186][187]
> pasik@iki.fi
> > > > > > 69.
> > [185][186][187][188]http://2.6.32.10/kernel/drivers/xen
> > > > > > 70. mailto:[186][187][188][189]
> pasik@iki.fi
> > > > > > 71.
> > > > >
> > > >
> > >
> > [187][188][189][190]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 72. mailto:[188][189][190][191]
> pasik@iki.fi
> > > > > > 73.
> > > > >
> > > >
> > >
> > [189][190][191][192]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 74. mailto:[190][191][192][193]
> pasik@iki.fi
> > > > > > 75. mailto:[191][192][193][194]
> pasik@iki.fi
> > > > > > 76.
> > [192][193][194][195]http://2.6.32.10/kernel/drivers/xen
> > > > > > 77. mailto:[193][194][195][196]
> pasik@iki.fi
> > > > > > 78.
> > > > >
> > > >
> > >
> > [194][195][196][197]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 79. mailto:[195][196][197][198]
> pasik@iki.fi
> > > > > > 80.
> > > > >
> > > >
> > >
> > [196][197][198][199]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 81. mailto:[197][198][199][200]
> pasik@iki.fi
> > > > > > 82.
> > [198][199][200][201]http://2.6.32.10/kernel/drivers/xen
> > > > > > 83. mailto:[199][200][201][202]
> pasik@iki.fi
> > > > > > 84.
> > > > >
> > > >
> > >
> > [200][201][202][203]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 85. mailto:[201][202][203][204]
> pasik@iki.fi
> > > > > > 86.
> > > > >
> > > >
> > >
> > [202][203][204][205]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 87. mailto:[203][204][205][206]
> pasik@iki.fi
> > > > > > 88.
> > mailto:[204][205][206][207]bodkekumar@gmail.com
> > > > > > 89. mailto:[205][206][207][208]
> pasik@iki.fi
> > > > > > 90. mailto:[206][207][208][209]
> pasik@iki.fi
> > > > > > 91.
> > [207][208][209][210]http://2.6.32.10/kernel/drivers/xen
> > > > > > 92. mailto:[208][209][210][211]
> pasik@iki.fi
> > > > > > 93.
> > > > >
> > > >
> > >
> > [209][210][211][212]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 94. mailto:[210][211][212][213]
> pasik@iki.fi
> > > > > > 95.
> > > > >
> > > >
> > >
> > [211][212][213][214]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 96. mailto:[212][213][214][215]
> pasik@iki.fi
> > > > > > 97.
> > [213][214][215][216]http://2.6.32.10/kernel/drivers/xen
> > > > > > 98. mailto:[214][215][216][217]
> pasik@iki.fi
> > > > > > 99.
> > > > >
> > > >
> > >
> > [215][216][217][218]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 100. mailto:[216][217][218][219]
> pasik@iki.fi
> > > > > > 101.
> > > > >
> > > >
> > >
> > [217][218][219][220]
> http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
[-- Attachment #1.2: Type: text/html, Size: 95734 bytes --]
[-- Attachment #2: Type: text/plain, Size: 137 bytes --]
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
next prev parent reply other threads:[~2010-03-30 18:33 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-23 0:00 Starting xend: grep: /proc/xen/capabilities: No such file or directory kishore kumar
2010-03-23 7:23 ` [Xen-users] " Pasi Kärkkäinen
2010-03-23 19:43 ` kishore kumar
2010-03-23 19:51 ` Pasi Kärkkäinen
2010-03-23 20:04 ` kishore kumar
2010-03-23 20:05 ` [Xen-users] " Pasi Kärkkäinen
2010-03-23 20:11 ` kishore kumar
2010-03-23 20:16 ` [Xen-users] " Pasi Kärkkäinen
2010-03-23 20:30 ` kishore kumar
2010-03-23 21:42 ` kishore kumar
2010-03-23 22:11 ` Pasi Kärkkäinen
2010-03-23 22:46 ` kishore kumar
2010-03-24 7:29 ` Pasi Kärkkäinen
2010-03-26 2:38 ` kishore kumar
2010-03-26 6:58 ` Pasi Kärkkäinen
2010-03-26 16:46 ` kishore kumar
2010-03-26 17:26 ` [Xen-users] " Pasi Kärkkäinen
2010-03-26 18:12 ` kishore kumar
2010-03-26 18:17 ` Pasi Kärkkäinen
2010-03-26 21:04 ` kishore kumar
[not found] ` <20100326213743.GR1878@reaktio.net>
[not found] ` <9f975f341003261504t30f400f0j5ee8401405f660cf@mail.gmail.com>
[not found] ` <20100327095913.GS1878@reaktio.net>
2010-03-30 18:33 ` kishore kumar [this message]
2010-03-30 19:51 ` Pasi Kärkkäinen
2010-03-30 21:09 ` kishore kumar
2010-03-29 16:57 ` [Xen-devel] " Pasi Kärkkäinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9f975f341003301133p79ed5954kf9010f719a352aef@mail.gmail.com \
--to=bodkekumar@gmail.com \
--cc=pasik@iki.fi \
--cc=xen-devel@lists.xensource.com \
--cc=xen-users@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).