* pvops Dom0 graphics doesnt work with Intel i915
@ 2010-09-29 18:12 sanjay kushwaha
2010-09-29 18:57 ` Jeremy Fitzhardinge
0 siblings, 1 reply; 19+ messages in thread
From: sanjay kushwaha @ 2010-09-29 18:12 UTC (permalink / raw)
To: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 852 bytes --]
Hi Folks,
I am trying to boot latest xen-unstable on my laptop which has Intel i915
graphics. PVOPS dom0 is 2.6.33.6 based (from branch xen/stable-2.6.33.x) and
the distro is fedora 13 64-bit. The graphics doesnt come up and it seems
that i915 driver is crashing multiple times. If I boot in run-level 3
(without X) dom0 boots fine.
I tried booting the dom0 kernel with nomodeset and nopat options without any
success. I searched on internet and found that multiple people have reported
similar problem but I could not find any solution.
Has anybody found a solution or workaround to this problem?
Thanks,
Sanjay
PS: I have another laptop with same version of xen and pvops dom0 but it has
ATI radeon graphics card. This laptop boots dom0 with graphics when I give
nomodeset and nopat options (but fails if I dont give either of those two
options).
[-- Attachment #1.2: Type: text/html, Size: 910 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: pvops Dom0 graphics doesnt work with Intel i915
2010-09-29 18:12 pvops Dom0 graphics doesnt work with Intel i915 sanjay kushwaha
@ 2010-09-29 18:57 ` Jeremy Fitzhardinge
2010-09-29 22:56 ` sanjay kushwaha
0 siblings, 1 reply; 19+ messages in thread
From: Jeremy Fitzhardinge @ 2010-09-29 18:57 UTC (permalink / raw)
To: sanjay kushwaha; +Cc: xen-devel
On 09/29/2010 11:12 AM, sanjay kushwaha wrote:
> Hi Folks,
> I am trying to boot latest xen-unstable on my laptop which has Intel
> i915 graphics. PVOPS dom0 is 2.6.33.6 based (from branch
> xen/stable-2.6.33.x)
Don't use that branch; it isn't supported (in fact, I deleted it a while
ago). Use xen/stable-2.6.32.x for now.
J
> and the distro is fedora 13 64-bit. The graphics doesnt come up and it
> seems that i915 driver is crashing multiple times. If I boot in
> run-level 3 (without X) dom0 boots fine.
> I tried booting the dom0 kernel with nomodeset and nopat options
> without any success. I searched on internet and found that multiple
> people have reported similar problem but I could not find any solution.
>
> Has anybody found a solution or workaround to this problem?
>
> Thanks,
> Sanjay
>
> PS: I have another laptop with same version of xen and pvops dom0 but
> it has ATI radeon graphics card. This laptop boots dom0 with graphics
> when I give nomodeset and nopat options (but fails if I dont give
> either of those two options).
>
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: pvops Dom0 graphics doesnt work with Intel i915
2010-09-29 18:57 ` Jeremy Fitzhardinge
@ 2010-09-29 22:56 ` sanjay kushwaha
2010-10-01 17:06 ` sanjay kushwaha
0 siblings, 1 reply; 19+ messages in thread
From: sanjay kushwaha @ 2010-09-29 22:56 UTC (permalink / raw)
To: Jeremy Fitzhardinge; +Cc: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 1940 bytes --]
Hi Jeremy,
I switched to stable-2.6.32.x branch (which is 2.6.32.21 based) but I get
the same problem. Attached is the Xorg.0.log file when I booted with
nomodeset option.
interestingly I did not see any kernel or driver crash messages in the dmesg
output. I do see these messages multiple times in /var/log/messages
*
Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING: GdmDisplay: display lasted
0.048984 seconds
Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING: GdmLocalDisplayFactory:
maximum number of X display failures reached: check X server log for errors*
Thanks,
Sanjay
On Wed, Sep 29, 2010 at 11:57 AM, Jeremy Fitzhardinge <jeremy@goop.org>wrote:
> On 09/29/2010 11:12 AM, sanjay kushwaha wrote:
> > Hi Folks,
> > I am trying to boot latest xen-unstable on my laptop which has Intel
> > i915 graphics. PVOPS dom0 is 2.6.33.6 based (from branch
> > xen/stable-2.6.33.x)
>
> Don't use that branch; it isn't supported (in fact, I deleted it a while
> ago). Use xen/stable-2.6.32.x for now.
>
> J
>
> > and the distro is fedora 13 64-bit. The graphics doesnt come up and it
> > seems that i915 driver is crashing multiple times. If I boot in
> > run-level 3 (without X) dom0 boots fine.
> > I tried booting the dom0 kernel with nomodeset and nopat options
> > without any success. I searched on internet and found that multiple
> > people have reported similar problem but I could not find any solution.
> >
> > Has anybody found a solution or workaround to this problem?
> >
> > Thanks,
> > Sanjay
> >
> > PS: I have another laptop with same version of xen and pvops dom0 but
> > it has ATI radeon graphics card. This laptop boots dom0 with graphics
> > when I give nomodeset and nopat options (but fails if I dont give
> > either of those two options).
> >
> >
> >
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xensource.com
> > http://lists.xensource.com/xen-devel
>
>
[-- Attachment #1.2: Type: text/html, Size: 2591 bytes --]
[-- Attachment #2: Xorg.0.log --]
[-- Type: application/octet-stream, Size: 8481 bytes --]
[ 28.198]
X.Org X Server 1.8.0
Release Date: 2010-04-02
[ 28.198] X Protocol Version 11, Revision 0
[ 28.198] Build Operating System: x86-02 2.6.18-164.15.1.el5
[ 28.198] Current Operating System: Linux vwifi0 2.6.32.21 #1 SMP Wed Sep 29 15:03:31 PDT 2010 x86_64
[ 28.198] Kernel command line: ro root=UUID=b61edcde-493d-484b-9a33-f736276bcf99 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us console=tty0 intel_iommu=off nomodeset
[ 28.198] Build Date: 02 May 2010 02:56:53PM
[ 28.198] Build ID: xorg-x11-server 1.8.0-12.fc13
[ 28.198] Current version of pixman: 0.18.0
[ 28.198] Before reporting problems, check http://bodhi.fedoraproject.org/
to make sure that you have the latest version.
[ 28.198] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 28.199] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 29 15:40:32 2010
[ 28.200] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 28.200] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 28.200] (==) No Layout section. Using the first Screen section.
[ 28.201] (==) No screen section available. Using defaults.
[ 28.201] (**) |-->Screen "Default Screen Section" (0)
[ 28.201] (**) | |-->Monitor "<default monitor>"
[ 28.201] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 28.201] (==) Automatically adding devices
[ 28.201] (==) Automatically enabling devices
[ 28.201] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 28.201] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 28.201] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 28.201] (II)
***************************************************************
***************************************************************
** Fedora switched to udev-based device detection with **
** xorg-x11-server-1.7.99.901-1. Custom HAL configuration **
** stored in /etc/hal/fdi/policy will not be seen by this **
** server version. If you have such configuration you will **
** need to update it to the new format. **
** For more information, see the Fedora wiki page **
** https://fedoraproject.org/wiki/Input_device_configuration **
***************************************************************
***************************************************************
[ 28.201] (II) Loader magic: 0x7ce560
[ 28.201] (II) Module ABI versions:
[ 28.201] X.Org ANSI C Emulation: 0.4
[ 28.201] X.Org Video Driver: 7.0
[ 28.201] X.Org XInput driver : 9.0
[ 28.202] X.Org Server Extension : 3.0
[ 28.217] (--) PCI:*(0:0:2:0) 8086:0046:17aa:215a Intel Corporation Core Processor Integrated Graphics Controller rev 2, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8, BIOS @ 0x????????/131072
[ 28.217] (II) LoadModule: "extmod"
[ 28.217] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 28.218] (II) Module extmod: vendor="X.Org Foundation"
[ 28.218] compiled for 1.8.0, module version = 1.0.0
[ 28.218] Module class: X.Org Server Extension
[ 28.218] ABI class: X.Org Server Extension, version 3.0
[ 28.218] (II) Loading extension SELinux
[ 28.218] (II) Loading extension MIT-SCREEN-SAVER
[ 28.218] (II) Loading extension XFree86-VidModeExtension
[ 28.218] (II) Loading extension XFree86-DGA
[ 28.218] (II) Loading extension DPMS
[ 28.218] (II) Loading extension XVideo
[ 28.218] (II) Loading extension XVideo-MotionCompensation
[ 28.218] (II) Loading extension X-Resource
[ 28.218] (II) LoadModule: "dbe"
[ 28.218] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 28.218] (II) Module dbe: vendor="X.Org Foundation"
[ 28.218] compiled for 1.8.0, module version = 1.0.0
[ 28.218] Module class: X.Org Server Extension
[ 28.218] ABI class: X.Org Server Extension, version 3.0
[ 28.218] (II) Loading extension DOUBLE-BUFFER
[ 28.219] (II) LoadModule: "glx"
[ 28.219] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 28.219] (II) Module glx: vendor="X.Org Foundation"
[ 28.219] compiled for 1.8.0, module version = 1.0.0
[ 28.219] ABI class: X.Org Server Extension, version 3.0
[ 28.219] (==) AIGLX enabled
[ 28.219] (II) Loading extension GLX
[ 28.219] (II) LoadModule: "record"
[ 28.219] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 28.219] (II) Module record: vendor="X.Org Foundation"
[ 28.219] compiled for 1.8.0, module version = 1.13.0
[ 28.219] Module class: X.Org Server Extension
[ 28.220] ABI class: X.Org Server Extension, version 3.0
[ 28.220] (II) Loading extension RECORD
[ 28.220] (II) LoadModule: "dri"
[ 28.220] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 28.220] (II) Module dri: vendor="X.Org Foundation"
[ 28.220] compiled for 1.8.0, module version = 1.0.0
[ 28.220] ABI class: X.Org Server Extension, version 3.0
[ 28.220] (II) Loading extension XFree86-DRI
[ 28.220] (II) LoadModule: "dri2"
[ 28.220] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 28.221] (II) Module dri2: vendor="X.Org Foundation"
[ 28.221] compiled for 1.8.0, module version = 1.2.0
[ 28.221] ABI class: X.Org Server Extension, version 3.0
[ 28.221] (II) Loading extension DRI2
[ 28.221] (==) Matched intel as autoconfigured driver 0
[ 28.221] (==) Matched vesa as autoconfigured driver 1
[ 28.221] (==) Matched fbdev as autoconfigured driver 2
[ 28.221] (==) Assigned the driver to the xf86ConfigLayout
[ 28.221] (II) LoadModule: "intel"
[ 28.221] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 28.221] (II) Module intel: vendor="X.Org Foundation"
[ 28.221] compiled for 1.8.0, module version = 2.11.0
[ 28.221] Module class: X.Org Video Driver
[ 28.221] ABI class: X.Org Video Driver, version 7.0
[ 28.221] (II) LoadModule: "vesa"
[ 28.222] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 28.222] (II) Module vesa: vendor="X.Org Foundation"
[ 28.222] compiled for 1.8.0, module version = 2.3.0
[ 28.222] Module class: X.Org Video Driver
[ 28.222] ABI class: X.Org Video Driver, version 7.0
[ 28.222] (II) LoadModule: "fbdev"
[ 28.222] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 28.222] (II) Module fbdev: vendor="X.Org Foundation"
[ 28.222] compiled for 1.7.99.3, module version = 0.4.1
[ 28.222] ABI class: X.Org Video Driver, version 7.0
[ 28.222] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 28.223] (II) VESA: driver for VESA chipsets: vesa
[ 28.223] (II) FBDEV: driver for framebuffer: fbdev
[ 28.223] (--) using VT number 7
[ 28.227] (II) Primary Device is: PCI 00@00:02:0
[ 28.227] (WW) Falling back to old probe method for vesa
[ 28.227] (WW) Falling back to old probe method for fbdev
[ 28.227] (II) Loading sub module "fbdevhw"
[ 28.227] (II) LoadModule: "fbdevhw"
[ 28.227] (II) Loading /usr/lib64/xorg/modules/linux/libfbdevhw.so
[ 28.227] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 28.227] compiled for 1.8.0, module version = 0.0.2
[ 28.227] ABI class: X.Org Video Driver, version 7.0
[ 28.227] (EE) open /dev/fb0: No such file or directory
[ 28.231] (EE) intel(0): No kernel modesetting driver detected.
[ 28.231] (II) UnloadModule: "intel"
[ 28.231] (EE) Screen(s) found, but none have a usable configuration.
[ 28.231]
Fatal server error:
[ 28.231] no screens found
[ 28.231]
Please consult the Fedora Project support
at http://bodhi.fedoraproject.org/
for help.
[ 28.231] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 28.231]
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: pvops Dom0 graphics doesnt work with Intel i915
2010-09-29 22:56 ` sanjay kushwaha
@ 2010-10-01 17:06 ` sanjay kushwaha
2010-10-01 17:57 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 19+ messages in thread
From: sanjay kushwaha @ 2010-10-01 17:06 UTC (permalink / raw)
To: Jeremy Fitzhardinge; +Cc: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 2309 bytes --]
When I dont use nomodeset option, dom0 boots fine X runs properly. So Fedora
13 (X86_64) distro with stable-2.6.32.x pvops kernel and xen-unstable works
fine for i915 without nomodeset option.
Thanks,
Sanjay
On Wed, Sep 29, 2010 at 3:56 PM, sanjay kushwaha
<sanjay.kushwaha@gmail.com>wrote:
> Hi Jeremy,
> I switched to stable-2.6.32.x branch (which is 2.6.32.21 based) but I get
> the same problem. Attached is the Xorg.0.log file when I booted with
> nomodeset option.
>
> interestingly I did not see any kernel or driver crash messages in the
> dmesg output. I do see these messages multiple times in /var/log/messages
> *
> Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING: GdmDisplay: display
> lasted 0.048984 seconds
> Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING: GdmLocalDisplayFactory:
> maximum number of X display failures reached: check X server log for errors
> *
>
> Thanks,
> Sanjay
>
>
> On Wed, Sep 29, 2010 at 11:57 AM, Jeremy Fitzhardinge <jeremy@goop.org>wrote:
>
>> On 09/29/2010 11:12 AM, sanjay kushwaha wrote:
>> > Hi Folks,
>> > I am trying to boot latest xen-unstable on my laptop which has Intel
>> > i915 graphics. PVOPS dom0 is 2.6.33.6 based (from branch
>> > xen/stable-2.6.33.x)
>>
>> Don't use that branch; it isn't supported (in fact, I deleted it a while
>> ago). Use xen/stable-2.6.32.x for now.
>>
>> J
>>
>> > and the distro is fedora 13 64-bit. The graphics doesnt come up and it
>> > seems that i915 driver is crashing multiple times. If I boot in
>> > run-level 3 (without X) dom0 boots fine.
>> > I tried booting the dom0 kernel with nomodeset and nopat options
>> > without any success. I searched on internet and found that multiple
>> > people have reported similar problem but I could not find any solution.
>> >
>> > Has anybody found a solution or workaround to this problem?
>> >
>> > Thanks,
>> > Sanjay
>> >
>> > PS: I have another laptop with same version of xen and pvops dom0 but
>> > it has ATI radeon graphics card. This laptop boots dom0 with graphics
>> > when I give nomodeset and nopat options (but fails if I dont give
>> > either of those two options).
>> >
>> >
>> >
>> > _______________________________________________
>> > Xen-devel mailing list
>> > Xen-devel@lists.xensource.com
>> > http://lists.xensource.com/xen-devel
>>
>>
>
[-- Attachment #1.2: Type: text/html, Size: 3255 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: pvops Dom0 graphics doesnt work with Intel i915
2010-10-01 17:06 ` sanjay kushwaha
@ 2010-10-01 17:57 ` Konrad Rzeszutek Wilk
2010-10-01 18:06 ` sanjay kushwaha
0 siblings, 1 reply; 19+ messages in thread
From: Konrad Rzeszutek Wilk @ 2010-10-01 17:57 UTC (permalink / raw)
To: sanjay kushwaha; +Cc: Jeremy Fitzhardinge, xen-devel
On Fri, Oct 01, 2010 at 10:06:48AM -0700, sanjay kushwaha wrote:
> When I dont use nomodeset option, dom0 boots fine X runs properly. So Fedora
> 13 (X86_64) distro with stable-2.6.32.x pvops kernel and xen-unstable works
> fine for i915 without nomodeset option.
Good to hear it works for you.
What about your radeon laptop?
>
> Thanks,
> Sanjay
>
> On Wed, Sep 29, 2010 at 3:56 PM, sanjay kushwaha
> <sanjay.kushwaha@gmail.com>wrote:
>
> > Hi Jeremy,
> > I switched to stable-2.6.32.x branch (which is 2.6.32.21 based) but I get
> > the same problem. Attached is the Xorg.0.log file when I booted with
> > nomodeset option.
> >
> > interestingly I did not see any kernel or driver crash messages in the
> > dmesg output. I do see these messages multiple times in /var/log/messages
> > *
> > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING: GdmDisplay: display
> > lasted 0.048984 seconds
> > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING: GdmLocalDisplayFactory:
> > maximum number of X display failures reached: check X server log for errors
> > *
> >
> > Thanks,
> > Sanjay
> >
> >
> > On Wed, Sep 29, 2010 at 11:57 AM, Jeremy Fitzhardinge <jeremy@goop.org>wrote:
> >
> >> On 09/29/2010 11:12 AM, sanjay kushwaha wrote:
> >> > Hi Folks,
> >> > I am trying to boot latest xen-unstable on my laptop which has Intel
> >> > i915 graphics. PVOPS dom0 is 2.6.33.6 based (from branch
> >> > xen/stable-2.6.33.x)
> >>
> >> Don't use that branch; it isn't supported (in fact, I deleted it a while
> >> ago). Use xen/stable-2.6.32.x for now.
> >>
> >> J
> >>
> >> > and the distro is fedora 13 64-bit. The graphics doesnt come up and it
> >> > seems that i915 driver is crashing multiple times. If I boot in
> >> > run-level 3 (without X) dom0 boots fine.
> >> > I tried booting the dom0 kernel with nomodeset and nopat options
> >> > without any success. I searched on internet and found that multiple
> >> > people have reported similar problem but I could not find any solution.
> >> >
> >> > Has anybody found a solution or workaround to this problem?
> >> >
> >> > Thanks,
> >> > Sanjay
> >> >
> >> > PS: I have another laptop with same version of xen and pvops dom0 but
> >> > it has ATI radeon graphics card. This laptop boots dom0 with graphics
> >> > when I give nomodeset and nopat options (but fails if I dont give
> >> > either of those two options).
> >> >
> >> >
> >> >
> >> > _______________________________________________
> >> > Xen-devel mailing list
> >> > Xen-devel@lists.xensource.com
> >> > http://lists.xensource.com/xen-devel
> >>
> >>
> >
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: pvops Dom0 graphics doesnt work with Intel i915
2010-10-01 17:57 ` Konrad Rzeszutek Wilk
@ 2010-10-01 18:06 ` sanjay kushwaha
2010-10-06 17:50 ` sanjay kushwaha
0 siblings, 1 reply; 19+ messages in thread
From: sanjay kushwaha @ 2010-10-01 18:06 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: Jeremy Fitzhardinge, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 3182 bytes --]
havent tried stable-2.6.32.x on Radeon. It works with nomodeset and nopat
options with stable-2.6.33.x branch.
On Fri, Oct 1, 2010 at 10:57 AM, Konrad Rzeszutek Wilk <
konrad.wilk@oracle.com> wrote:
> On Fri, Oct 01, 2010 at 10:06:48AM -0700, sanjay kushwaha wrote:
> > When I dont use nomodeset option, dom0 boots fine X runs properly. So
> Fedora
> > 13 (X86_64) distro with stable-2.6.32.x pvops kernel and xen-unstable
> works
> > fine for i915 without nomodeset option.
>
> Good to hear it works for you.
>
> What about your radeon laptop?
> >
> > Thanks,
> > Sanjay
> >
> > On Wed, Sep 29, 2010 at 3:56 PM, sanjay kushwaha
> > <sanjay.kushwaha@gmail.com>wrote:
> >
> > > Hi Jeremy,
> > > I switched to stable-2.6.32.x branch (which is 2.6.32.21 based) but I
> get
> > > the same problem. Attached is the Xorg.0.log file when I booted with
> > > nomodeset option.
> > >
> > > interestingly I did not see any kernel or driver crash messages in the
> > > dmesg output. I do see these messages multiple times in
> /var/log/messages
> > > *
> > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING: GdmDisplay: display
> > > lasted 0.048984 seconds
> > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> GdmLocalDisplayFactory:
> > > maximum number of X display failures reached: check X server log for
> errors
> > > *
> > >
> > > Thanks,
> > > Sanjay
> > >
> > >
> > > On Wed, Sep 29, 2010 at 11:57 AM, Jeremy Fitzhardinge <jeremy@goop.org
> >wrote:
> > >
> > >> On 09/29/2010 11:12 AM, sanjay kushwaha wrote:
> > >> > Hi Folks,
> > >> > I am trying to boot latest xen-unstable on my laptop which has Intel
> > >> > i915 graphics. PVOPS dom0 is 2.6.33.6 based (from branch
> > >> > xen/stable-2.6.33.x)
> > >>
> > >> Don't use that branch; it isn't supported (in fact, I deleted it a
> while
> > >> ago). Use xen/stable-2.6.32.x for now.
> > >>
> > >> J
> > >>
> > >> > and the distro is fedora 13 64-bit. The graphics doesnt come up and
> it
> > >> > seems that i915 driver is crashing multiple times. If I boot in
> > >> > run-level 3 (without X) dom0 boots fine.
> > >> > I tried booting the dom0 kernel with nomodeset and nopat options
> > >> > without any success. I searched on internet and found that multiple
> > >> > people have reported similar problem but I could not find any
> solution.
> > >> >
> > >> > Has anybody found a solution or workaround to this problem?
> > >> >
> > >> > Thanks,
> > >> > Sanjay
> > >> >
> > >> > PS: I have another laptop with same version of xen and pvops dom0
> but
> > >> > it has ATI radeon graphics card. This laptop boots dom0 with
> graphics
> > >> > when I give nomodeset and nopat options (but fails if I dont give
> > >> > either of those two options).
> > >> >
> > >> >
> > >> >
> > >> > _______________________________________________
> > >> > Xen-devel mailing list
> > >> > Xen-devel@lists.xensource.com
> > >> > http://lists.xensource.com/xen-devel
> > >>
> > >>
> > >
>
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xensource.com
> > http://lists.xensource.com/xen-devel
>
>
--
----------------------
Dr. Sanjay Kumar
Research Scientist
Intel Corporation
[-- Attachment #1.2: Type: text/html, Size: 4672 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: pvops Dom0 graphics doesnt work with Intel i915
2010-10-01 18:06 ` sanjay kushwaha
@ 2010-10-06 17:50 ` sanjay kushwaha
2010-10-06 20:12 ` Pasi Kärkkäinen
0 siblings, 1 reply; 19+ messages in thread
From: sanjay kushwaha @ 2010-10-06 17:50 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: Jeremy Fitzhardinge, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 4336 bytes --]
Hi,
I have run into more problems now. This time with VT-d.
When I enable VT-d on this laptop, graphics again stops working in dom0 with
pvops (linux 2.6.32.21). the screen starts showing garbage as soon as it
switches into graphics mode.this happens when I boot the pvops kernel both
as dom0 and native linux. However, when I try 2.6.33 based pvops kernel
(stable-2.6.33.x) graphics seems to work fine with VT-d when running native
but it doesnt work when running as Dom0.
so now the problem is:
with stable-2.6.32.x: graphics works in Dom0 without Vt-d but not with VT-d
(neither native nor Dom0).
with stable-2.6.33.x: graphics works with VT-d when running native but
doesnt work when running as Dom0 (with or without VT-d).
I am experiencing this problem both with Lenovo T410, and Dell latitude
E6410.
Has anybody experienced this problem?
Thanks,
Sanjay
On Fri, Oct 1, 2010 at 11:06 AM, sanjay kushwaha
<sanjay.kushwaha@gmail.com>wrote:
> havent tried stable-2.6.32.x on Radeon. It works with nomodeset and nopat
> options with stable-2.6.33.x branch.
>
>
>
>
> On Fri, Oct 1, 2010 at 10:57 AM, Konrad Rzeszutek Wilk <
> konrad.wilk@oracle.com> wrote:
>
>> On Fri, Oct 01, 2010 at 10:06:48AM -0700, sanjay kushwaha wrote:
>> > When I dont use nomodeset option, dom0 boots fine X runs properly. So
>> Fedora
>> > 13 (X86_64) distro with stable-2.6.32.x pvops kernel and xen-unstable
>> works
>> > fine for i915 without nomodeset option.
>>
>> Good to hear it works for you.
>>
>> What about your radeon laptop?
>> >
>> > Thanks,
>> > Sanjay
>> >
>> > On Wed, Sep 29, 2010 at 3:56 PM, sanjay kushwaha
>> > <sanjay.kushwaha@gmail.com>wrote:
>> >
>> > > Hi Jeremy,
>> > > I switched to stable-2.6.32.x branch (which is 2.6.32.21 based) but I
>> get
>> > > the same problem. Attached is the Xorg.0.log file when I booted with
>> > > nomodeset option.
>> > >
>> > > interestingly I did not see any kernel or driver crash messages in the
>> > > dmesg output. I do see these messages multiple times in
>> /var/log/messages
>> > > *
>> > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING: GdmDisplay: display
>> > > lasted 0.048984 seconds
>> > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
>> GdmLocalDisplayFactory:
>> > > maximum number of X display failures reached: check X server log for
>> errors
>> > > *
>> > >
>> > > Thanks,
>> > > Sanjay
>> > >
>> > >
>> > > On Wed, Sep 29, 2010 at 11:57 AM, Jeremy Fitzhardinge <
>> jeremy@goop.org>wrote:
>> > >
>> > >> On 09/29/2010 11:12 AM, sanjay kushwaha wrote:
>> > >> > Hi Folks,
>> > >> > I am trying to boot latest xen-unstable on my laptop which has
>> Intel
>> > >> > i915 graphics. PVOPS dom0 is 2.6.33.6 based (from branch
>> > >> > xen/stable-2.6.33.x)
>> > >>
>> > >> Don't use that branch; it isn't supported (in fact, I deleted it a
>> while
>> > >> ago). Use xen/stable-2.6.32.x for now.
>> > >>
>> > >> J
>> > >>
>> > >> > and the distro is fedora 13 64-bit. The graphics doesnt come up and
>> it
>> > >> > seems that i915 driver is crashing multiple times. If I boot in
>> > >> > run-level 3 (without X) dom0 boots fine.
>> > >> > I tried booting the dom0 kernel with nomodeset and nopat options
>> > >> > without any success. I searched on internet and found that multiple
>> > >> > people have reported similar problem but I could not find any
>> solution.
>> > >> >
>> > >> > Has anybody found a solution or workaround to this problem?
>> > >> >
>> > >> > Thanks,
>> > >> > Sanjay
>> > >> >
>> > >> > PS: I have another laptop with same version of xen and pvops dom0
>> but
>> > >> > it has ATI radeon graphics card. This laptop boots dom0 with
>> graphics
>> > >> > when I give nomodeset and nopat options (but fails if I dont give
>> > >> > either of those two options).
>> > >> >
>> > >> >
>> > >> >
>> > >> > _______________________________________________
>> > >> > Xen-devel mailing list
>> > >> > Xen-devel@lists.xensource.com
>> > >> > http://lists.xensource.com/xen-devel
>> > >>
>> > >>
>> > >
>>
>> > _______________________________________________
>> > Xen-devel mailing list
>> > Xen-devel@lists.xensource.com
>> > http://lists.xensource.com/xen-devel
>>
>>
>
>
> --
> ----------------------
> Dr. Sanjay Kumar
> Research Scientist
> Intel Corporation
>
--
----------------------
Dr. Sanjay Kumar
Research Scientist
Intel Corporation
[-- Attachment #1.2: Type: text/html, Size: 6197 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: pvops Dom0 graphics doesnt work with Intel i915
2010-10-06 17:50 ` sanjay kushwaha
@ 2010-10-06 20:12 ` Pasi Kärkkäinen
2010-10-06 23:02 ` sanjay kushwaha
0 siblings, 1 reply; 19+ messages in thread
From: Pasi Kärkkäinen @ 2010-10-06 20:12 UTC (permalink / raw)
To: sanjay kushwaha; +Cc: Jeremy Fitzhardinge, xen-devel, Konrad Rzeszutek Wilk
On Wed, Oct 06, 2010 at 10:50:57AM -0700, sanjay kushwaha wrote:
> Hi,
> I have run into more problems now. This time with VT-d.
> When I enable VT-d on this laptop, graphics again stops working in dom0
> with pvops (linux 2.6.32.21). the screen starts showing garbage as soon as
> it switches into graphics mode.this happens when I boot the pvops kernel
> both as dom0 and native linux. However, when I try 2.6.33 based pvops
> kernel (stable-2.6.33.x) graphics seems to work fine with VT-d when
> running native but it doesnt work when running as Dom0.
>
> so now the problem is:
>
> with stable-2.6.32.x: graphics works in Dom0 without Vt-d but not with
> VT-d (neither native nor Dom0).
> with stable-2.6.33.x: graphics works with VT-d when running native but
> doesnt work when running as Dom0 (with or without VT-d).
>
stable-2.6.33.x is not maintained, and you shouldn't use it.
I think Konrad has a backport of the 2.6.34 drm/dri drivers
to stable-2.6.32.x somewhere.. that might help.
http://wiki.xensource.com/xenwiki/XenPVOPSDRM
-- Pasi
> I am experiencing this problem both with Lenovo T410, and Dell latitude
> E6410.
> Has anybody experienced this problem?
>
> Thanks,
> Sanjay
>
> On Fri, Oct 1, 2010 at 11:06 AM, sanjay kushwaha
> <[1]sanjay.kushwaha@gmail.com> wrote:
>
> havent tried stable-2.6.32.x on Radeon. It works with nomodeset and
> nopat options with stable-2.6.33.x branch.
>
> On Fri, Oct 1, 2010 at 10:57 AM, Konrad Rzeszutek Wilk
> <[2]konrad.wilk@oracle.com> wrote:
>
> On Fri, Oct 01, 2010 at 10:06:48AM -0700, sanjay kushwaha wrote:
> > When I dont use nomodeset option, dom0 boots fine X runs properly.
> So Fedora
> > 13 (X86_64) distro with stable-2.6.32.x pvops kernel and
> xen-unstable works
> > fine for i915 without nomodeset option.
>
> Good to hear it works for you.
>
> What about your radeon laptop?
> >
> > Thanks,
> > Sanjay
> >
> > On Wed, Sep 29, 2010 at 3:56 PM, sanjay kushwaha
> > <[3]sanjay.kushwaha@gmail.com>wrote:
> >
> > > Hi Jeremy,
> > > I switched to stable-2.6.32.x branch (which is 2.6.32.21 based)
> but I get
> > > the same problem. Attached is the Xorg.0.log file when I booted
> with
> > > nomodeset option.
> > >
> > > interestingly I did not see any kernel or driver crash messages in
> the
> > > dmesg output. I do see these messages multiple times in
> /var/log/messages
> > > *
> > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING: GdmDisplay:
> display
> > > lasted 0.048984 seconds
> > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> GdmLocalDisplayFactory:
> > > maximum number of X display failures reached: check X server log
> for errors
> > > *
> > >
> > > Thanks,
> > > Sanjay
> > >
> > >
> > > On Wed, Sep 29, 2010 at 11:57 AM, Jeremy Fitzhardinge
> <[4]jeremy@goop.org>wrote:
> > >
> > >> On 09/29/2010 11:12 AM, sanjay kushwaha wrote:
> > >> > Hi Folks,
> > >> > I am trying to boot latest xen-unstable on my laptop which has
> Intel
> > >> > i915 graphics. PVOPS dom0 is 2.6.33.6 based (from branch
> > >> > xen/stable-2.6.33.x)
> > >>
> > >> Don't use that branch; it isn't supported (in fact, I deleted it
> a while
> > >> ago). Use xen/stable-2.6.32.x for now.
> > >>
> > >> J
> > >>
> > >> > and the distro is fedora 13 64-bit. The graphics doesnt come up
> and it
> > >> > seems that i915 driver is crashing multiple times. If I boot in
> > >> > run-level 3 (without X) dom0 boots fine.
> > >> > I tried booting the dom0 kernel with nomodeset and nopat
> options
> > >> > without any success. I searched on internet and found that
> multiple
> > >> > people have reported similar problem but I could not find any
> solution.
> > >> >
> > >> > Has anybody found a solution or workaround to this problem?
> > >> >
> > >> > Thanks,
> > >> > Sanjay
> > >> >
> > >> > PS: I have another laptop with same version of xen and pvops
> dom0 but
> > >> > it has ATI radeon graphics card. This laptop boots dom0 with
> graphics
> > >> > when I give nomodeset and nopat options (but fails if I dont
> give
> > >> > either of those two options).
> > >> >
> > >> >
> > >> >
> > >> > _______________________________________________
> > >> > Xen-devel mailing list
> > >> > [5]Xen-devel@lists.xensource.com
> > >> > [6]http://lists.xensource.com/xen-devel
> > >>
> > >>
> > >
>
> > _______________________________________________
> > Xen-devel mailing list
> > [7]Xen-devel@lists.xensource.com
> > [8]http://lists.xensource.com/xen-devel
>
> --
> ----------------------
> Dr. Sanjay Kumar
> Research Scientist
> Intel Corporation
>
> --
> ----------------------
> Dr. Sanjay Kumar
> Research Scientist
> Intel Corporation
>
> References
>
> Visible links
> 1. mailto:sanjay.kushwaha@gmail.com
> 2. mailto:konrad.wilk@oracle.com
> 3. mailto:sanjay.kushwaha@gmail.com
> 4. mailto:jeremy@goop.org
> 5. mailto:Xen-devel@lists.xensource.com
> 6. http://lists.xensource.com/xen-devel
> 7. mailto:Xen-devel@lists.xensource.com
> 8. http://lists.xensource.com/xen-devel
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: pvops Dom0 graphics doesnt work with Intel i915
2010-10-06 20:12 ` Pasi Kärkkäinen
@ 2010-10-06 23:02 ` sanjay kushwaha
2010-10-07 1:07 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 19+ messages in thread
From: sanjay kushwaha @ 2010-10-06 23:02 UTC (permalink / raw)
To: Pasi Kärkkäinen
Cc: Jeremy Fitzhardinge, xen-devel, Konrad Rzeszutek Wilk
[-- Attachment #1.1: Type: text/plain, Size: 7220 bytes --]
Thanks Pasi.
Hi Konrad,
Could you please let me know how to get these backported drivers as
indicated by Pasi? This is the tree that I have.
[evans@vwifi0 linux-2.6.32.x]$ git show
commit b297cdac0373625d3cd0e6f2b393570dcf2edba6
Merge: c6cfd01 64392f6
Author: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon Sep 13 14:27:24 2010 -0700
Merge branch 'xen/next' into xen/next-2.6.32
* xen/next:
xen/netfront: Fix another potential race condition
Revert "xen/netfront: default smartpoll to on"
[evans@vwifi0 linux-2.6.32.x]$
Thanks,
Sanjay
On Wed, Oct 6, 2010 at 1:12 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote:
> On Wed, Oct 06, 2010 at 10:50:57AM -0700, sanjay kushwaha wrote:
> > Hi,
> > I have run into more problems now. This time with VT-d.
> > When I enable VT-d on this laptop, graphics again stops working in
> dom0
> > with pvops (linux 2.6.32.21). the screen starts showing garbage as
> soon as
> > it switches into graphics mode.this happens when I boot the pvops
> kernel
> > both as dom0 and native linux. However, when I try 2.6.33 based pvops
> > kernel (stable-2.6.33.x) graphics seems to work fine with VT-d when
> > running native but it doesnt work when running as Dom0.
> >
> > so now the problem is:
> >
> > with stable-2.6.32.x: graphics works in Dom0 without Vt-d but not with
> > VT-d (neither native nor Dom0).
> > with stable-2.6.33.x: graphics works with VT-d when running native but
> > doesnt work when running as Dom0 (with or without VT-d).
> >
>
> stable-2.6.33.x is not maintained, and you shouldn't use it.
>
> I think Konrad has a backport of the 2.6.34 drm/dri drivers
> to stable-2.6.32.x somewhere.. that might help.
>
> http://wiki.xensource.com/xenwiki/XenPVOPSDRM
>
> -- Pasi
>
> > I am experiencing this problem both with Lenovo T410, and Dell
> latitude
> > E6410.
> > Has anybody experienced this problem?
> >
> > Thanks,
> > Sanjay
> >
> > On Fri, Oct 1, 2010 at 11:06 AM, sanjay kushwaha
> > <[1]sanjay.kushwaha@gmail.com> wrote:
> >
> > havent tried stable-2.6.32.x on Radeon. It works with nomodeset and
> > nopat options with stable-2.6.33.x branch.
> >
> > On Fri, Oct 1, 2010 at 10:57 AM, Konrad Rzeszutek Wilk
> > <[2]konrad.wilk@oracle.com> wrote:
> >
> > On Fri, Oct 01, 2010 at 10:06:48AM -0700, sanjay kushwaha wrote:
> > > When I dont use nomodeset option, dom0 boots fine X runs
> properly.
> > So Fedora
> > > 13 (X86_64) distro with stable-2.6.32.x pvops kernel and
> > xen-unstable works
> > > fine for i915 without nomodeset option.
> >
> > Good to hear it works for you.
> >
> > What about your radeon laptop?
> > >
> > > Thanks,
> > > Sanjay
> > >
> > > On Wed, Sep 29, 2010 at 3:56 PM, sanjay kushwaha
> > > <[3]sanjay.kushwaha@gmail.com>wrote:
> > >
> > > > Hi Jeremy,
> > > > I switched to stable-2.6.32.x branch (which is 2.6.32.21
> based)
> > but I get
> > > > the same problem. Attached is the Xorg.0.log file when I
> booted
> > with
> > > > nomodeset option.
> > > >
> > > > interestingly I did not see any kernel or driver crash
> messages in
> > the
> > > > dmesg output. I do see these messages multiple times in
> > /var/log/messages
> > > > *
> > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING: GdmDisplay:
> > display
> > > > lasted 0.048984 seconds
> > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> > GdmLocalDisplayFactory:
> > > > maximum number of X display failures reached: check X server
> log
> > for errors
> > > > *
> > > >
> > > > Thanks,
> > > > Sanjay
> > > >
> > > >
> > > > On Wed, Sep 29, 2010 at 11:57 AM, Jeremy Fitzhardinge
> > <[4]jeremy@goop.org>wrote:
> > > >
> > > >> On 09/29/2010 11:12 AM, sanjay kushwaha wrote:
> > > >> > Hi Folks,
> > > >> > I am trying to boot latest xen-unstable on my laptop which
> has
> > Intel
> > > >> > i915 graphics. PVOPS dom0 is 2.6.33.6 based (from branch
> > > >> > xen/stable-2.6.33.x)
> > > >>
> > > >> Don't use that branch; it isn't supported (in fact, I deleted
> it
> > a while
> > > >> ago). Use xen/stable-2.6.32.x for now.
> > > >>
> > > >> J
> > > >>
> > > >> > and the distro is fedora 13 64-bit. The graphics doesnt
> come up
> > and it
> > > >> > seems that i915 driver is crashing multiple times. If I
> boot in
> > > >> > run-level 3 (without X) dom0 boots fine.
> > > >> > I tried booting the dom0 kernel with nomodeset and nopat
> > options
> > > >> > without any success. I searched on internet and found that
> > multiple
> > > >> > people have reported similar problem but I could not find
> any
> > solution.
> > > >> >
> > > >> > Has anybody found a solution or workaround to this problem?
> > > >> >
> > > >> > Thanks,
> > > >> > Sanjay
> > > >> >
> > > >> > PS: I have another laptop with same version of xen and
> pvops
> > dom0 but
> > > >> > it has ATI radeon graphics card. This laptop boots dom0
> with
> > graphics
> > > >> > when I give nomodeset and nopat options (but fails if I
> dont
> > give
> > > >> > either of those two options).
> > > >> >
> > > >> >
> > > >> >
> > > >> > _______________________________________________
> > > >> > Xen-devel mailing list
> > > >> > [5]Xen-devel@lists.xensource.com
> > > >> > [6]http://lists.xensource.com/xen-devel
> > > >>
> > > >>
> > > >
> >
> > > _______________________________________________
> > > Xen-devel mailing list
> > > [7]Xen-devel@lists.xensource.com
> > > [8]http://lists.xensource.com/xen-devel
> >
> > --
> > ----------------------
> > Dr. Sanjay Kumar
> > Research Scientist
> > Intel Corporation
> >
> > --
> > ----------------------
> > Dr. Sanjay Kumar
> > Research Scientist
> > Intel Corporation
> >
> > References
> >
> > Visible links
> > 1. mailto:sanjay.kushwaha@gmail.com
> > 2. mailto:konrad.wilk@oracle.com
> > 3. mailto:sanjay.kushwaha@gmail.com
> > 4. mailto:jeremy@goop.org
> > 5. mailto:Xen-devel@lists.xensource.com
> > 6. http://lists.xensource.com/xen-devel
> > 7. mailto:Xen-devel@lists.xensource.com
> > 8. http://lists.xensource.com/xen-devel
>
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xensource.com
> > http://lists.xensource.com/xen-devel
>
>
--
----------------------
Dr. Sanjay Kumar
Research Scientist
Intel Corporation
[-- Attachment #1.2: Type: text/html, Size: 10229 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: pvops Dom0 graphics doesnt work with Intel i915
2010-10-06 23:02 ` sanjay kushwaha
@ 2010-10-07 1:07 ` Konrad Rzeszutek Wilk
2010-10-07 17:36 ` sanjay kushwaha
0 siblings, 1 reply; 19+ messages in thread
From: Konrad Rzeszutek Wilk @ 2010-10-07 1:07 UTC (permalink / raw)
To: sanjay kushwaha; +Cc: Jeremy Fitzhardinge, xen-devel
On Wed, Oct 06, 2010 at 04:02:51PM -0700, sanjay kushwaha wrote:
> Thanks Pasi.
>
> Hi Konrad,
> Could you please let me know how to get these backported drivers as
> indicated by Pasi? This is the tree that I have.
Just follow the Wiki. Oh, I need to update it.
Here do this:
git remote add konrad git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git
git pull konrad
git checkout konrad/devel/next.drm
make
>
> [evans@vwifi0 linux-2.6.32.x]$ git show
> commit b297cdac0373625d3cd0e6f2b393570dcf2edba6
> Merge: c6cfd01 64392f6
> Author: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
> Date: Mon Sep 13 14:27:24 2010 -0700
>
> Merge branch 'xen/next' into xen/next-2.6.32
>
> * xen/next:
> xen/netfront: Fix another potential race condition
> Revert "xen/netfront: default smartpoll to on"
>
> [evans@vwifi0 linux-2.6.32.x]$
>
>
> Thanks,
> Sanjay
>
> On Wed, Oct 6, 2010 at 1:12 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote:
>
> > On Wed, Oct 06, 2010 at 10:50:57AM -0700, sanjay kushwaha wrote:
> > > Hi,
> > > I have run into more problems now. This time with VT-d.
> > > When I enable VT-d on this laptop, graphics again stops working in
> > dom0
> > > with pvops (linux 2.6.32.21). the screen starts showing garbage as
> > soon as
> > > it switches into graphics mode.this happens when I boot the pvops
> > kernel
> > > both as dom0 and native linux. However, when I try 2.6.33 based pvops
> > > kernel (stable-2.6.33.x) graphics seems to work fine with VT-d when
> > > running native but it doesnt work when running as Dom0.
> > >
> > > so now the problem is:
> > >
> > > with stable-2.6.32.x: graphics works in Dom0 without Vt-d but not with
> > > VT-d (neither native nor Dom0).
> > > with stable-2.6.33.x: graphics works with VT-d when running native but
> > > doesnt work when running as Dom0 (with or without VT-d).
> > >
> >
> > stable-2.6.33.x is not maintained, and you shouldn't use it.
> >
> > I think Konrad has a backport of the 2.6.34 drm/dri drivers
> > to stable-2.6.32.x somewhere.. that might help.
> >
> > http://wiki.xensource.com/xenwiki/XenPVOPSDRM
> >
> > -- Pasi
> >
> > > I am experiencing this problem both with Lenovo T410, and Dell
> > latitude
> > > E6410.
> > > Has anybody experienced this problem?
> > >
> > > Thanks,
> > > Sanjay
> > >
> > > On Fri, Oct 1, 2010 at 11:06 AM, sanjay kushwaha
> > > <[1]sanjay.kushwaha@gmail.com> wrote:
> > >
> > > havent tried stable-2.6.32.x on Radeon. It works with nomodeset and
> > > nopat options with stable-2.6.33.x branch.
> > >
> > > On Fri, Oct 1, 2010 at 10:57 AM, Konrad Rzeszutek Wilk
> > > <[2]konrad.wilk@oracle.com> wrote:
> > >
> > > On Fri, Oct 01, 2010 at 10:06:48AM -0700, sanjay kushwaha wrote:
> > > > When I dont use nomodeset option, dom0 boots fine X runs
> > properly.
> > > So Fedora
> > > > 13 (X86_64) distro with stable-2.6.32.x pvops kernel and
> > > xen-unstable works
> > > > fine for i915 without nomodeset option.
> > >
> > > Good to hear it works for you.
> > >
> > > What about your radeon laptop?
> > > >
> > > > Thanks,
> > > > Sanjay
> > > >
> > > > On Wed, Sep 29, 2010 at 3:56 PM, sanjay kushwaha
> > > > <[3]sanjay.kushwaha@gmail.com>wrote:
> > > >
> > > > > Hi Jeremy,
> > > > > I switched to stable-2.6.32.x branch (which is 2.6.32.21
> > based)
> > > but I get
> > > > > the same problem. Attached is the Xorg.0.log file when I
> > booted
> > > with
> > > > > nomodeset option.
> > > > >
> > > > > interestingly I did not see any kernel or driver crash
> > messages in
> > > the
> > > > > dmesg output. I do see these messages multiple times in
> > > /var/log/messages
> > > > > *
> > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING: GdmDisplay:
> > > display
> > > > > lasted 0.048984 seconds
> > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> > > GdmLocalDisplayFactory:
> > > > > maximum number of X display failures reached: check X server
> > log
> > > for errors
> > > > > *
> > > > >
> > > > > Thanks,
> > > > > Sanjay
> > > > >
> > > > >
> > > > > On Wed, Sep 29, 2010 at 11:57 AM, Jeremy Fitzhardinge
> > > <[4]jeremy@goop.org>wrote:
> > > > >
> > > > >> On 09/29/2010 11:12 AM, sanjay kushwaha wrote:
> > > > >> > Hi Folks,
> > > > >> > I am trying to boot latest xen-unstable on my laptop which
> > has
> > > Intel
> > > > >> > i915 graphics. PVOPS dom0 is 2.6.33.6 based (from branch
> > > > >> > xen/stable-2.6.33.x)
> > > > >>
> > > > >> Don't use that branch; it isn't supported (in fact, I deleted
> > it
> > > a while
> > > > >> ago). Use xen/stable-2.6.32.x for now.
> > > > >>
> > > > >> J
> > > > >>
> > > > >> > and the distro is fedora 13 64-bit. The graphics doesnt
> > come up
> > > and it
> > > > >> > seems that i915 driver is crashing multiple times. If I
> > boot in
> > > > >> > run-level 3 (without X) dom0 boots fine.
> > > > >> > I tried booting the dom0 kernel with nomodeset and nopat
> > > options
> > > > >> > without any success. I searched on internet and found that
> > > multiple
> > > > >> > people have reported similar problem but I could not find
> > any
> > > solution.
> > > > >> >
> > > > >> > Has anybody found a solution or workaround to this problem?
> > > > >> >
> > > > >> > Thanks,
> > > > >> > Sanjay
> > > > >> >
> > > > >> > PS: I have another laptop with same version of xen and
> > pvops
> > > dom0 but
> > > > >> > it has ATI radeon graphics card. This laptop boots dom0
> > with
> > > graphics
> > > > >> > when I give nomodeset and nopat options (but fails if I
> > dont
> > > give
> > > > >> > either of those two options).
> > > > >> >
> > > > >> >
> > > > >> >
> > > > >> > _______________________________________________
> > > > >> > Xen-devel mailing list
> > > > >> > [5]Xen-devel@lists.xensource.com
> > > > >> > [6]http://lists.xensource.com/xen-devel
> > > > >>
> > > > >>
> > > > >
> > >
> > > > _______________________________________________
> > > > Xen-devel mailing list
> > > > [7]Xen-devel@lists.xensource.com
> > > > [8]http://lists.xensource.com/xen-devel
> > >
> > > --
> > > ----------------------
> > > Dr. Sanjay Kumar
> > > Research Scientist
> > > Intel Corporation
> > >
> > > --
> > > ----------------------
> > > Dr. Sanjay Kumar
> > > Research Scientist
> > > Intel Corporation
> > >
> > > References
> > >
> > > Visible links
> > > 1. mailto:sanjay.kushwaha@gmail.com
> > > 2. mailto:konrad.wilk@oracle.com
> > > 3. mailto:sanjay.kushwaha@gmail.com
> > > 4. mailto:jeremy@goop.org
> > > 5. mailto:Xen-devel@lists.xensource.com
> > > 6. http://lists.xensource.com/xen-devel
> > > 7. mailto:Xen-devel@lists.xensource.com
> > > 8. http://lists.xensource.com/xen-devel
> >
> > > _______________________________________________
> > > Xen-devel mailing list
> > > Xen-devel@lists.xensource.com
> > > http://lists.xensource.com/xen-devel
> >
> >
>
>
> --
> ----------------------
> Dr. Sanjay Kumar
> Research Scientist
> Intel Corporation
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: pvops Dom0 graphics doesnt work with Intel i915
2010-10-07 1:07 ` Konrad Rzeszutek Wilk
@ 2010-10-07 17:36 ` sanjay kushwaha
2010-10-07 18:05 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 19+ messages in thread
From: sanjay kushwaha @ 2010-10-07 17:36 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: Jeremy Fitzhardinge, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 8891 bytes --]
Hi Konrad,
I tried your tree. It created a 2.6.32.15 based pvops kernel but graphics
with VT-d still doesn't work. when I give iommu=0 on xen kernel command line
in grub menu, graphics works but with iommu=1 it doesnt work (The whole
screen is garbage).
On Wed, Oct 6, 2010 at 6:07 PM, Konrad Rzeszutek Wilk <
konrad.wilk@oracle.com> wrote:
> On Wed, Oct 06, 2010 at 04:02:51PM -0700, sanjay kushwaha wrote:
> > Thanks Pasi.
> >
> > Hi Konrad,
> > Could you please let me know how to get these backported drivers as
> > indicated by Pasi? This is the tree that I have.
>
> Just follow the Wiki. Oh, I need to update it.
>
> Here do this:
>
> git remote add konrad git://
> git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git
>
> git pull konrad
> git checkout konrad/devel/next.drm
>
> make
>
> >
> > [evans@vwifi0 linux-2.6.32.x]$ git show
> > commit b297cdac0373625d3cd0e6f2b393570dcf2edba6
> > Merge: c6cfd01 64392f6
> > Author: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
> > Date: Mon Sep 13 14:27:24 2010 -0700
> >
> > Merge branch 'xen/next' into xen/next-2.6.32
> >
> > * xen/next:
> > xen/netfront: Fix another potential race condition
> > Revert "xen/netfront: default smartpoll to on"
> >
> > [evans@vwifi0 linux-2.6.32.x]$
> >
> >
> > Thanks,
> > Sanjay
> >
> > On Wed, Oct 6, 2010 at 1:12 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote:
> >
> > > On Wed, Oct 06, 2010 at 10:50:57AM -0700, sanjay kushwaha wrote:
> > > > Hi,
> > > > I have run into more problems now. This time with VT-d.
> > > > When I enable VT-d on this laptop, graphics again stops working in
> > > dom0
> > > > with pvops (linux 2.6.32.21). the screen starts showing garbage as
> > > soon as
> > > > it switches into graphics mode.this happens when I boot the pvops
> > > kernel
> > > > both as dom0 and native linux. However, when I try 2.6.33 based
> pvops
> > > > kernel (stable-2.6.33.x) graphics seems to work fine with VT-d
> when
> > > > running native but it doesnt work when running as Dom0.
> > > >
> > > > so now the problem is:
> > > >
> > > > with stable-2.6.32.x: graphics works in Dom0 without Vt-d but not
> with
> > > > VT-d (neither native nor Dom0).
> > > > with stable-2.6.33.x: graphics works with VT-d when running native
> but
> > > > doesnt work when running as Dom0 (with or without VT-d).
> > > >
> > >
> > > stable-2.6.33.x is not maintained, and you shouldn't use it.
> > >
> > > I think Konrad has a backport of the 2.6.34 drm/dri drivers
> > > to stable-2.6.32.x somewhere.. that might help.
> > >
> > > http://wiki.xensource.com/xenwiki/XenPVOPSDRM
> > >
> > > -- Pasi
> > >
> > > > I am experiencing this problem both with Lenovo T410, and Dell
> > > latitude
> > > > E6410.
> > > > Has anybody experienced this problem?
> > > >
> > > > Thanks,
> > > > Sanjay
> > > >
> > > > On Fri, Oct 1, 2010 at 11:06 AM, sanjay kushwaha
> > > > <[1]sanjay.kushwaha@gmail.com> wrote:
> > > >
> > > > havent tried stable-2.6.32.x on Radeon. It works with nomodeset
> and
> > > > nopat options with stable-2.6.33.x branch.
> > > >
> > > > On Fri, Oct 1, 2010 at 10:57 AM, Konrad Rzeszutek Wilk
> > > > <[2]konrad.wilk@oracle.com> wrote:
> > > >
> > > > On Fri, Oct 01, 2010 at 10:06:48AM -0700, sanjay kushwaha
> wrote:
> > > > > When I dont use nomodeset option, dom0 boots fine X runs
> > > properly.
> > > > So Fedora
> > > > > 13 (X86_64) distro with stable-2.6.32.x pvops kernel and
> > > > xen-unstable works
> > > > > fine for i915 without nomodeset option.
> > > >
> > > > Good to hear it works for you.
> > > >
> > > > What about your radeon laptop?
> > > > >
> > > > > Thanks,
> > > > > Sanjay
> > > > >
> > > > > On Wed, Sep 29, 2010 at 3:56 PM, sanjay kushwaha
> > > > > <[3]sanjay.kushwaha@gmail.com>wrote:
> > > > >
> > > > > > Hi Jeremy,
> > > > > > I switched to stable-2.6.32.x branch (which is 2.6.32.21
> > > based)
> > > > but I get
> > > > > > the same problem. Attached is the Xorg.0.log file when I
> > > booted
> > > > with
> > > > > > nomodeset option.
> > > > > >
> > > > > > interestingly I did not see any kernel or driver crash
> > > messages in
> > > > the
> > > > > > dmesg output. I do see these messages multiple times in
> > > > /var/log/messages
> > > > > > *
> > > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> GdmDisplay:
> > > > display
> > > > > > lasted 0.048984 seconds
> > > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> > > > GdmLocalDisplayFactory:
> > > > > > maximum number of X display failures reached: check X
> server
> > > log
> > > > for errors
> > > > > > *
> > > > > >
> > > > > > Thanks,
> > > > > > Sanjay
> > > > > >
> > > > > >
> > > > > > On Wed, Sep 29, 2010 at 11:57 AM, Jeremy Fitzhardinge
> > > > <[4]jeremy@goop.org>wrote:
> > > > > >
> > > > > >> On 09/29/2010 11:12 AM, sanjay kushwaha wrote:
> > > > > >> > Hi Folks,
> > > > > >> > I am trying to boot latest xen-unstable on my laptop
> which
> > > has
> > > > Intel
> > > > > >> > i915 graphics. PVOPS dom0 is 2.6.33.6 based (from
> branch
> > > > > >> > xen/stable-2.6.33.x)
> > > > > >>
> > > > > >> Don't use that branch; it isn't supported (in fact, I
> deleted
> > > it
> > > > a while
> > > > > >> ago). Use xen/stable-2.6.32.x for now.
> > > > > >>
> > > > > >> J
> > > > > >>
> > > > > >> > and the distro is fedora 13 64-bit. The graphics doesnt
> > > come up
> > > > and it
> > > > > >> > seems that i915 driver is crashing multiple times. If I
> > > boot in
> > > > > >> > run-level 3 (without X) dom0 boots fine.
> > > > > >> > I tried booting the dom0 kernel with nomodeset and
> nopat
> > > > options
> > > > > >> > without any success. I searched on internet and found
> that
> > > > multiple
> > > > > >> > people have reported similar problem but I could not
> find
> > > any
> > > > solution.
> > > > > >> >
> > > > > >> > Has anybody found a solution or workaround to this
> problem?
> > > > > >> >
> > > > > >> > Thanks,
> > > > > >> > Sanjay
> > > > > >> >
> > > > > >> > PS: I have another laptop with same version of xen and
> > > pvops
> > > > dom0 but
> > > > > >> > it has ATI radeon graphics card. This laptop boots dom0
> > > with
> > > > graphics
> > > > > >> > when I give nomodeset and nopat options (but fails if I
> > > dont
> > > > give
> > > > > >> > either of those two options).
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> > _______________________________________________
> > > > > >> > Xen-devel mailing list
> > > > > >> > [5]Xen-devel@lists.xensource.com
> > > > > >> > [6]http://lists.xensource.com/xen-devel
> > > > > >>
> > > > > >>
> > > > > >
> > > >
> > > > > _______________________________________________
> > > > > Xen-devel mailing list
> > > > > [7]Xen-devel@lists.xensource.com
> > > > > [8]http://lists.xensource.com/xen-devel
> > > >
> > > > --
> > > > ----------------------
> > > > Dr. Sanjay Kumar
> > > > Research Scientist
> > > > Intel Corporation
> > > >
> > > > --
> > > > ----------------------
> > > > Dr. Sanjay Kumar
> > > > Research Scientist
> > > > Intel Corporation
> > > >
> > > > References
> > > >
> > > > Visible links
> > > > 1. mailto:sanjay.kushwaha@gmail.com
> > > > 2. mailto:konrad.wilk@oracle.com
> > > > 3. mailto:sanjay.kushwaha@gmail.com
> > > > 4. mailto:jeremy@goop.org
> > > > 5. mailto:Xen-devel@lists.xensource.com
> > > > 6. http://lists.xensource.com/xen-devel
> > > > 7. mailto:Xen-devel@lists.xensource.com
> > > > 8. http://lists.xensource.com/xen-devel
> > >
> > > > _______________________________________________
> > > > Xen-devel mailing list
> > > > Xen-devel@lists.xensource.com
> > > > http://lists.xensource.com/xen-devel
> > >
> > >
> >
> >
> > --
> > ----------------------
> > Dr. Sanjay Kumar
> > Research Scientist
> > Intel Corporation
>
--
----------------------
Dr. Sanjay Kumar
Research Scientist
Intel Corporation
[-- Attachment #1.2: Type: text/html, Size: 13186 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: pvops Dom0 graphics doesnt work with Intel i915
2010-10-07 17:36 ` sanjay kushwaha
@ 2010-10-07 18:05 ` Konrad Rzeszutek Wilk
2010-10-07 19:12 ` sanjay kushwaha
0 siblings, 1 reply; 19+ messages in thread
From: Konrad Rzeszutek Wilk @ 2010-10-07 18:05 UTC (permalink / raw)
To: sanjay kushwaha; +Cc: Jeremy Fitzhardinge, xen-devel
On Thu, Oct 07, 2010 at 10:36:34AM -0700, sanjay kushwaha wrote:
> Hi Konrad,
> I tried your tree. It created a 2.6.32.15 based pvops kernel but graphics
> with VT-d still doesn't work. when I give iommu=0 on xen kernel command line
> in grub menu, graphics works but with iommu=1 it doesnt work (The whole
> screen is garbage).
Are there any warnings/debug messages in the serial log? Please follow
the PVOPS Wiki on how to enable all the debug options.
>
>
> On Wed, Oct 6, 2010 at 6:07 PM, Konrad Rzeszutek Wilk <
> konrad.wilk@oracle.com> wrote:
>
> > On Wed, Oct 06, 2010 at 04:02:51PM -0700, sanjay kushwaha wrote:
> > > Thanks Pasi.
> > >
> > > Hi Konrad,
> > > Could you please let me know how to get these backported drivers as
> > > indicated by Pasi? This is the tree that I have.
> >
> > Just follow the Wiki. Oh, I need to update it.
> >
> > Here do this:
> >
> > git remote add konrad git://
> > git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git
> >
> > git pull konrad
> > git checkout konrad/devel/next.drm
> >
> > make
> >
> > >
> > > [evans@vwifi0 linux-2.6.32.x]$ git show
> > > commit b297cdac0373625d3cd0e6f2b393570dcf2edba6
> > > Merge: c6cfd01 64392f6
> > > Author: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
> > > Date: Mon Sep 13 14:27:24 2010 -0700
> > >
> > > Merge branch 'xen/next' into xen/next-2.6.32
> > >
> > > * xen/next:
> > > xen/netfront: Fix another potential race condition
> > > Revert "xen/netfront: default smartpoll to on"
> > >
> > > [evans@vwifi0 linux-2.6.32.x]$
> > >
> > >
> > > Thanks,
> > > Sanjay
> > >
> > > On Wed, Oct 6, 2010 at 1:12 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote:
> > >
> > > > On Wed, Oct 06, 2010 at 10:50:57AM -0700, sanjay kushwaha wrote:
> > > > > Hi,
> > > > > I have run into more problems now. This time with VT-d.
> > > > > When I enable VT-d on this laptop, graphics again stops working in
> > > > dom0
> > > > > with pvops (linux 2.6.32.21). the screen starts showing garbage as
> > > > soon as
> > > > > it switches into graphics mode.this happens when I boot the pvops
> > > > kernel
> > > > > both as dom0 and native linux. However, when I try 2.6.33 based
> > pvops
> > > > > kernel (stable-2.6.33.x) graphics seems to work fine with VT-d
> > when
> > > > > running native but it doesnt work when running as Dom0.
> > > > >
> > > > > so now the problem is:
> > > > >
> > > > > with stable-2.6.32.x: graphics works in Dom0 without Vt-d but not
> > with
> > > > > VT-d (neither native nor Dom0).
> > > > > with stable-2.6.33.x: graphics works with VT-d when running native
> > but
> > > > > doesnt work when running as Dom0 (with or without VT-d).
> > > > >
> > > >
> > > > stable-2.6.33.x is not maintained, and you shouldn't use it.
> > > >
> > > > I think Konrad has a backport of the 2.6.34 drm/dri drivers
> > > > to stable-2.6.32.x somewhere.. that might help.
> > > >
> > > > http://wiki.xensource.com/xenwiki/XenPVOPSDRM
> > > >
> > > > -- Pasi
> > > >
> > > > > I am experiencing this problem both with Lenovo T410, and Dell
> > > > latitude
> > > > > E6410.
> > > > > Has anybody experienced this problem?
> > > > >
> > > > > Thanks,
> > > > > Sanjay
> > > > >
> > > > > On Fri, Oct 1, 2010 at 11:06 AM, sanjay kushwaha
> > > > > <[1]sanjay.kushwaha@gmail.com> wrote:
> > > > >
> > > > > havent tried stable-2.6.32.x on Radeon. It works with nomodeset
> > and
> > > > > nopat options with stable-2.6.33.x branch.
> > > > >
> > > > > On Fri, Oct 1, 2010 at 10:57 AM, Konrad Rzeszutek Wilk
> > > > > <[2]konrad.wilk@oracle.com> wrote:
> > > > >
> > > > > On Fri, Oct 01, 2010 at 10:06:48AM -0700, sanjay kushwaha
> > wrote:
> > > > > > When I dont use nomodeset option, dom0 boots fine X runs
> > > > properly.
> > > > > So Fedora
> > > > > > 13 (X86_64) distro with stable-2.6.32.x pvops kernel and
> > > > > xen-unstable works
> > > > > > fine for i915 without nomodeset option.
> > > > >
> > > > > Good to hear it works for you.
> > > > >
> > > > > What about your radeon laptop?
> > > > > >
> > > > > > Thanks,
> > > > > > Sanjay
> > > > > >
> > > > > > On Wed, Sep 29, 2010 at 3:56 PM, sanjay kushwaha
> > > > > > <[3]sanjay.kushwaha@gmail.com>wrote:
> > > > > >
> > > > > > > Hi Jeremy,
> > > > > > > I switched to stable-2.6.32.x branch (which is 2.6.32.21
> > > > based)
> > > > > but I get
> > > > > > > the same problem. Attached is the Xorg.0.log file when I
> > > > booted
> > > > > with
> > > > > > > nomodeset option.
> > > > > > >
> > > > > > > interestingly I did not see any kernel or driver crash
> > > > messages in
> > > > > the
> > > > > > > dmesg output. I do see these messages multiple times in
> > > > > /var/log/messages
> > > > > > > *
> > > > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> > GdmDisplay:
> > > > > display
> > > > > > > lasted 0.048984 seconds
> > > > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> > > > > GdmLocalDisplayFactory:
> > > > > > > maximum number of X display failures reached: check X
> > server
> > > > log
> > > > > for errors
> > > > > > > *
> > > > > > >
> > > > > > > Thanks,
> > > > > > > Sanjay
> > > > > > >
> > > > > > >
> > > > > > > On Wed, Sep 29, 2010 at 11:57 AM, Jeremy Fitzhardinge
> > > > > <[4]jeremy@goop.org>wrote:
> > > > > > >
> > > > > > >> On 09/29/2010 11:12 AM, sanjay kushwaha wrote:
> > > > > > >> > Hi Folks,
> > > > > > >> > I am trying to boot latest xen-unstable on my laptop
> > which
> > > > has
> > > > > Intel
> > > > > > >> > i915 graphics. PVOPS dom0 is 2.6.33.6 based (from
> > branch
> > > > > > >> > xen/stable-2.6.33.x)
> > > > > > >>
> > > > > > >> Don't use that branch; it isn't supported (in fact, I
> > deleted
> > > > it
> > > > > a while
> > > > > > >> ago). Use xen/stable-2.6.32.x for now.
> > > > > > >>
> > > > > > >> J
> > > > > > >>
> > > > > > >> > and the distro is fedora 13 64-bit. The graphics doesnt
> > > > come up
> > > > > and it
> > > > > > >> > seems that i915 driver is crashing multiple times. If I
> > > > boot in
> > > > > > >> > run-level 3 (without X) dom0 boots fine.
> > > > > > >> > I tried booting the dom0 kernel with nomodeset and
> > nopat
> > > > > options
> > > > > > >> > without any success. I searched on internet and found
> > that
> > > > > multiple
> > > > > > >> > people have reported similar problem but I could not
> > find
> > > > any
> > > > > solution.
> > > > > > >> >
> > > > > > >> > Has anybody found a solution or workaround to this
> > problem?
> > > > > > >> >
> > > > > > >> > Thanks,
> > > > > > >> > Sanjay
> > > > > > >> >
> > > > > > >> > PS: I have another laptop with same version of xen and
> > > > pvops
> > > > > dom0 but
> > > > > > >> > it has ATI radeon graphics card. This laptop boots dom0
> > > > with
> > > > > graphics
> > > > > > >> > when I give nomodeset and nopat options (but fails if I
> > > > dont
> > > > > give
> > > > > > >> > either of those two options).
> > > > > > >> >
> > > > > > >> >
> > > > > > >> >
> > > > > > >> > _______________________________________________
> > > > > > >> > Xen-devel mailing list
> > > > > > >> > [5]Xen-devel@lists.xensource.com
> > > > > > >> > [6]http://lists.xensource.com/xen-devel
> > > > > > >>
> > > > > > >>
> > > > > > >
> > > > >
> > > > > > _______________________________________________
> > > > > > Xen-devel mailing list
> > > > > > [7]Xen-devel@lists.xensource.com
> > > > > > [8]http://lists.xensource.com/xen-devel
> > > > >
> > > > > --
> > > > > ----------------------
> > > > > Dr. Sanjay Kumar
> > > > > Research Scientist
> > > > > Intel Corporation
> > > > >
> > > > > --
> > > > > ----------------------
> > > > > Dr. Sanjay Kumar
> > > > > Research Scientist
> > > > > Intel Corporation
> > > > >
> > > > > References
> > > > >
> > > > > Visible links
> > > > > 1. mailto:sanjay.kushwaha@gmail.com
> > > > > 2. mailto:konrad.wilk@oracle.com
> > > > > 3. mailto:sanjay.kushwaha@gmail.com
> > > > > 4. mailto:jeremy@goop.org
> > > > > 5. mailto:Xen-devel@lists.xensource.com
> > > > > 6. http://lists.xensource.com/xen-devel
> > > > > 7. mailto:Xen-devel@lists.xensource.com
> > > > > 8. http://lists.xensource.com/xen-devel
> > > >
> > > > > _______________________________________________
> > > > > Xen-devel mailing list
> > > > > Xen-devel@lists.xensource.com
> > > > > http://lists.xensource.com/xen-devel
> > > >
> > > >
> > >
> > >
> > > --
> > > ----------------------
> > > Dr. Sanjay Kumar
> > > Research Scientist
> > > Intel Corporation
> >
>
>
>
> --
> ----------------------
> Dr. Sanjay Kumar
> Research Scientist
> Intel Corporation
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: pvops Dom0 graphics doesnt work with Intel i915
2010-10-07 18:05 ` Konrad Rzeszutek Wilk
@ 2010-10-07 19:12 ` sanjay kushwaha
2010-10-07 19:33 ` Pasi Kärkkäinen
2010-10-07 22:05 ` Kay, Allen M
0 siblings, 2 replies; 19+ messages in thread
From: sanjay kushwaha @ 2010-10-07 19:12 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: Jeremy Fitzhardinge, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 10805 bytes --]
Hi Konrad,
Unfortunately T410 doesnt have a serial port and neither does the docking
station. I havent had any success with USB-to-Serial port dongles in the
past. is there any way to get the serial port output?
Thanks,
Sanjay
On Thu, Oct 7, 2010 at 11:05 AM, Konrad Rzeszutek Wilk <
konrad.wilk@oracle.com> wrote:
> On Thu, Oct 07, 2010 at 10:36:34AM -0700, sanjay kushwaha wrote:
> > Hi Konrad,
> > I tried your tree. It created a 2.6.32.15 based pvops kernel but graphics
> > with VT-d still doesn't work. when I give iommu=0 on xen kernel command
> line
> > in grub menu, graphics works but with iommu=1 it doesnt work (The whole
> > screen is garbage).
>
> Are there any warnings/debug messages in the serial log? Please follow
> the PVOPS Wiki on how to enable all the debug options.
> >
> >
> > On Wed, Oct 6, 2010 at 6:07 PM, Konrad Rzeszutek Wilk <
> > konrad.wilk@oracle.com> wrote:
> >
> > > On Wed, Oct 06, 2010 at 04:02:51PM -0700, sanjay kushwaha wrote:
> > > > Thanks Pasi.
> > > >
> > > > Hi Konrad,
> > > > Could you please let me know how to get these backported drivers as
> > > > indicated by Pasi? This is the tree that I have.
> > >
> > > Just follow the Wiki. Oh, I need to update it.
> > >
> > > Here do this:
> > >
> > > git remote add konrad git://
> > > git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git
> > >
> > > git pull konrad
> > > git checkout konrad/devel/next.drm
> > >
> > > make
> > >
> > > >
> > > > [evans@vwifi0 linux-2.6.32.x]$ git show
> > > > commit b297cdac0373625d3cd0e6f2b393570dcf2edba6
> > > > Merge: c6cfd01 64392f6
> > > > Author: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
> > > > Date: Mon Sep 13 14:27:24 2010 -0700
> > > >
> > > > Merge branch 'xen/next' into xen/next-2.6.32
> > > >
> > > > * xen/next:
> > > > xen/netfront: Fix another potential race condition
> > > > Revert "xen/netfront: default smartpoll to on"
> > > >
> > > > [evans@vwifi0 linux-2.6.32.x]$
> > > >
> > > >
> > > > Thanks,
> > > > Sanjay
> > > >
> > > > On Wed, Oct 6, 2010 at 1:12 PM, Pasi Kärkkäinen <pasik@iki.fi>
> wrote:
> > > >
> > > > > On Wed, Oct 06, 2010 at 10:50:57AM -0700, sanjay kushwaha wrote:
> > > > > > Hi,
> > > > > > I have run into more problems now. This time with VT-d.
> > > > > > When I enable VT-d on this laptop, graphics again stops
> working in
> > > > > dom0
> > > > > > with pvops (linux 2.6.32.21). the screen starts showing
> garbage as
> > > > > soon as
> > > > > > it switches into graphics mode.this happens when I boot the
> pvops
> > > > > kernel
> > > > > > both as dom0 and native linux. However, when I try 2.6.33
> based
> > > pvops
> > > > > > kernel (stable-2.6.33.x) graphics seems to work fine with VT-d
> > > when
> > > > > > running native but it doesnt work when running as Dom0.
> > > > > >
> > > > > > so now the problem is:
> > > > > >
> > > > > > with stable-2.6.32.x: graphics works in Dom0 without Vt-d but
> not
> > > with
> > > > > > VT-d (neither native nor Dom0).
> > > > > > with stable-2.6.33.x: graphics works with VT-d when running
> native
> > > but
> > > > > > doesnt work when running as Dom0 (with or without VT-d).
> > > > > >
> > > > >
> > > > > stable-2.6.33.x is not maintained, and you shouldn't use it.
> > > > >
> > > > > I think Konrad has a backport of the 2.6.34 drm/dri drivers
> > > > > to stable-2.6.32.x somewhere.. that might help.
> > > > >
> > > > > http://wiki.xensource.com/xenwiki/XenPVOPSDRM
> > > > >
> > > > > -- Pasi
> > > > >
> > > > > > I am experiencing this problem both with Lenovo T410, and Dell
> > > > > latitude
> > > > > > E6410.
> > > > > > Has anybody experienced this problem?
> > > > > >
> > > > > > Thanks,
> > > > > > Sanjay
> > > > > >
> > > > > > On Fri, Oct 1, 2010 at 11:06 AM, sanjay kushwaha
> > > > > > <[1]sanjay.kushwaha@gmail.com> wrote:
> > > > > >
> > > > > > havent tried stable-2.6.32.x on Radeon. It works with
> nomodeset
> > > and
> > > > > > nopat options with stable-2.6.33.x branch.
> > > > > >
> > > > > > On Fri, Oct 1, 2010 at 10:57 AM, Konrad Rzeszutek Wilk
> > > > > > <[2]konrad.wilk@oracle.com> wrote:
> > > > > >
> > > > > > On Fri, Oct 01, 2010 at 10:06:48AM -0700, sanjay kushwaha
> > > wrote:
> > > > > > > When I dont use nomodeset option, dom0 boots fine X runs
> > > > > properly.
> > > > > > So Fedora
> > > > > > > 13 (X86_64) distro with stable-2.6.32.x pvops kernel and
> > > > > > xen-unstable works
> > > > > > > fine for i915 without nomodeset option.
> > > > > >
> > > > > > Good to hear it works for you.
> > > > > >
> > > > > > What about your radeon laptop?
> > > > > > >
> > > > > > > Thanks,
> > > > > > > Sanjay
> > > > > > >
> > > > > > > On Wed, Sep 29, 2010 at 3:56 PM, sanjay kushwaha
> > > > > > > <[3]sanjay.kushwaha@gmail.com>wrote:
> > > > > > >
> > > > > > > > Hi Jeremy,
> > > > > > > > I switched to stable-2.6.32.x branch (which is
> 2.6.32.21
> > > > > based)
> > > > > > but I get
> > > > > > > > the same problem. Attached is the Xorg.0.log file when
> I
> > > > > booted
> > > > > > with
> > > > > > > > nomodeset option.
> > > > > > > >
> > > > > > > > interestingly I did not see any kernel or driver crash
> > > > > messages in
> > > > > > the
> > > > > > > > dmesg output. I do see these messages multiple times
> in
> > > > > > /var/log/messages
> > > > > > > > *
> > > > > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> > > GdmDisplay:
> > > > > > display
> > > > > > > > lasted 0.048984 seconds
> > > > > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> > > > > > GdmLocalDisplayFactory:
> > > > > > > > maximum number of X display failures reached: check X
> > > server
> > > > > log
> > > > > > for errors
> > > > > > > > *
> > > > > > > >
> > > > > > > > Thanks,
> > > > > > > > Sanjay
> > > > > > > >
> > > > > > > >
> > > > > > > > On Wed, Sep 29, 2010 at 11:57 AM, Jeremy Fitzhardinge
> > > > > > <[4]jeremy@goop.org>wrote:
> > > > > > > >
> > > > > > > >> On 09/29/2010 11:12 AM, sanjay kushwaha wrote:
> > > > > > > >> > Hi Folks,
> > > > > > > >> > I am trying to boot latest xen-unstable on my
> laptop
> > > which
> > > > > has
> > > > > > Intel
> > > > > > > >> > i915 graphics. PVOPS dom0 is 2.6.33.6 based (from
> > > branch
> > > > > > > >> > xen/stable-2.6.33.x)
> > > > > > > >>
> > > > > > > >> Don't use that branch; it isn't supported (in fact, I
> > > deleted
> > > > > it
> > > > > > a while
> > > > > > > >> ago). Use xen/stable-2.6.32.x for now.
> > > > > > > >>
> > > > > > > >> J
> > > > > > > >>
> > > > > > > >> > and the distro is fedora 13 64-bit. The graphics
> doesnt
> > > > > come up
> > > > > > and it
> > > > > > > >> > seems that i915 driver is crashing multiple times.
> If I
> > > > > boot in
> > > > > > > >> > run-level 3 (without X) dom0 boots fine.
> > > > > > > >> > I tried booting the dom0 kernel with nomodeset and
> > > nopat
> > > > > > options
> > > > > > > >> > without any success. I searched on internet and
> found
> > > that
> > > > > > multiple
> > > > > > > >> > people have reported similar problem but I could
> not
> > > find
> > > > > any
> > > > > > solution.
> > > > > > > >> >
> > > > > > > >> > Has anybody found a solution or workaround to this
> > > problem?
> > > > > > > >> >
> > > > > > > >> > Thanks,
> > > > > > > >> > Sanjay
> > > > > > > >> >
> > > > > > > >> > PS: I have another laptop with same version of xen
> and
> > > > > pvops
> > > > > > dom0 but
> > > > > > > >> > it has ATI radeon graphics card. This laptop boots
> dom0
> > > > > with
> > > > > > graphics
> > > > > > > >> > when I give nomodeset and nopat options (but fails
> if I
> > > > > dont
> > > > > > give
> > > > > > > >> > either of those two options).
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> > _______________________________________________
> > > > > > > >> > Xen-devel mailing list
> > > > > > > >> > [5]Xen-devel@lists.xensource.com
> > > > > > > >> > [6]http://lists.xensource.com/xen-devel
> > > > > > > >>
> > > > > > > >>
> > > > > > > >
> > > > > >
> > > > > > > _______________________________________________
> > > > > > > Xen-devel mailing list
> > > > > > > [7]Xen-devel@lists.xensource.com
> > > > > > > [8]http://lists.xensource.com/xen-devel
> > > > > >
> > > > > > --
> > > > > > ----------------------
> > > > > > Dr. Sanjay Kumar
> > > > > > Research Scientist
> > > > > > Intel Corporation
> > > > > >
> > > > > > --
> > > > > > ----------------------
> > > > > > Dr. Sanjay Kumar
> > > > > > Research Scientist
> > > > > > Intel Corporation
> > > > > >
> > > > > > References
> > > > > >
> > > > > > Visible links
> > > > > > 1. mailto:sanjay.kushwaha@gmail.com
> > > > > > 2. mailto:konrad.wilk@oracle.com
> > > > > > 3. mailto:sanjay.kushwaha@gmail.com
> > > > > > 4. mailto:jeremy@goop.org
> > > > > > 5. mailto:Xen-devel@lists.xensource.com
> > > > > > 6. http://lists.xensource.com/xen-devel
> > > > > > 7. mailto:Xen-devel@lists.xensource.com
> > > > > > 8. http://lists.xensource.com/xen-devel
> > > > >
> > > > > > _______________________________________________
> > > > > > Xen-devel mailing list
> > > > > > Xen-devel@lists.xensource.com
> > > > > > http://lists.xensource.com/xen-devel
> > > > >
> > > > >
> > > >
> > > >
> > > > --
> > > > ----------------------
> > > > Dr. Sanjay Kumar
> > > > Research Scientist
> > > > Intel Corporation
> > >
> >
> >
> >
> > --
> > ----------------------
> > Dr. Sanjay Kumar
> > Research Scientist
> > Intel Corporation
>
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xensource.com
> > http://lists.xensource.com/xen-devel
>
>
--
----------------------
Dr. Sanjay Kumar
Research Scientist
Intel Corporation
[-- Attachment #1.2: Type: text/html, Size: 16917 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: pvops Dom0 graphics doesnt work with Intel i915
2010-10-07 19:12 ` sanjay kushwaha
@ 2010-10-07 19:33 ` Pasi Kärkkäinen
2010-10-07 22:05 ` Kay, Allen M
1 sibling, 0 replies; 19+ messages in thread
From: Pasi Kärkkäinen @ 2010-10-07 19:33 UTC (permalink / raw)
To: sanjay kushwaha; +Cc: Jeremy Fitzhardinge, xen-devel, Konrad Rzeszutek Wilk
On Thu, Oct 07, 2010 at 12:12:30PM -0700, sanjay kushwaha wrote:
> Hi Konrad,
> Unfortunately T410 doesnt have a serial port and neither does the docking
> station. I havent had any success with USB-to-Serial port dongles in the
> past. is there any way to get the serial port output?
>
Is that vPro laptop? If yes, then it should have Intel AMT (Active Management Technology),
which provides SOL (Serial Over Lan).
-- Pasi
> Thanks,
> Sanjay
>
> On Thu, Oct 7, 2010 at 11:05 AM, Konrad Rzeszutek Wilk
> <[1]konrad.wilk@oracle.com> wrote:
>
> On Thu, Oct 07, 2010 at 10:36:34AM -0700, sanjay kushwaha wrote:
> > Hi Konrad,
> > I tried your tree. It created a 2.6.32.15 based pvops kernel but
> graphics
> > with VT-d still doesn't work. when I give iommu=0 on xen kernel
> command line
> > in grub menu, graphics works but with iommu=1 it doesnt work (The
> whole
> > screen is garbage).
>
> Are there any warnings/debug messages in the serial log? Please follow
> the PVOPS Wiki on how to enable all the debug options.
> >
> >
> > On Wed, Oct 6, 2010 at 6:07 PM, Konrad Rzeszutek Wilk <
> > [2]konrad.wilk@oracle.com> wrote:
> >
> > > On Wed, Oct 06, 2010 at 04:02:51PM -0700, sanjay kushwaha wrote:
> > > > Thanks Pasi.
> > > >
> > > > Hi Konrad,
> > > > Could you please let me know how to get these backported drivers
> as
> > > > indicated by Pasi? This is the tree that I have.
> > >
> > > Just follow the Wiki. Oh, I need to update it.
> > >
> > > Here do this:
> > >
> > > git remote add konrad git://
> > > [3]git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git
> > >
> > > git pull konrad
> > > git checkout konrad/devel/next.drm
> > >
> > > make
> > >
> > > >
> > > > [evans@vwifi0 linux-2.6.32.x]$ git show
> > > > commit b297cdac0373625d3cd0e6f2b393570dcf2edba6
> > > > Merge: c6cfd01 64392f6
> > > > Author: Jeremy Fitzhardinge <[4]jeremy.fitzhardinge@citrix.com>
> > > > Date: Mon Sep 13 14:27:24 2010 -0700
> > > >
> > > > Merge branch 'xen/next' into xen/next-2.6.32
> > > >
> > > > * xen/next:
> > > > xen/netfront: Fix another potential race condition
> > > > Revert "xen/netfront: default smartpoll to on"
> > > >
> > > > [evans@vwifi0 linux-2.6.32.x]$
> > > >
> > > >
> > > > Thanks,
> > > > Sanjay
> > > >
> > > > On Wed, Oct 6, 2010 at 1:12 PM, Pasi Kärkkäinen <[5]pasik@iki.fi>
> wrote:
> > > >
> > > > > On Wed, Oct 06, 2010 at 10:50:57AM -0700, sanjay kushwaha wrote:
> > > > > > Hi,
> > > > > > I have run into more problems now. This time with VT-d.
> > > > > > When I enable VT-d on this laptop, graphics again stops
> working in
> > > > > dom0
> > > > > > with pvops (linux 2.6.32.21). the screen starts showing
> garbage as
> > > > > soon as
> > > > > > it switches into graphics mode.this happens when I boot the
> pvops
> > > > > kernel
> > > > > > both as dom0 and native linux. However, when I try 2.6.33
> based
> > > pvops
> > > > > > kernel (stable-2.6.33.x) graphics seems to work fine with
> VT-d
> > > when
> > > > > > running native but it doesnt work when running as Dom0.
> > > > > >
> > > > > > so now the problem is:
> > > > > >
> > > > > > with stable-2.6.32.x: graphics works in Dom0 without Vt-d
> but not
> > > with
> > > > > > VT-d (neither native nor Dom0).
> > > > > > with stable-2.6.33.x: graphics works with VT-d when running
> native
> > > but
> > > > > > doesnt work when running as Dom0 (with or without VT-d).
> > > > > >
> > > > >
> > > > > stable-2.6.33.x is not maintained, and you shouldn't use it.
> > > > >
> > > > > I think Konrad has a backport of the 2.6.34 drm/dri drivers
> > > > > to stable-2.6.32.x somewhere.. that might help.
> > > > >
> > > > > [6]http://wiki.xensource.com/xenwiki/XenPVOPSDRM
> > > > >
> > > > > -- Pasi
> > > > >
> > > > > > I am experiencing this problem both with Lenovo T410, and
> Dell
> > > > > latitude
> > > > > > E6410.
> > > > > > Has anybody experienced this problem?
> > > > > >
> > > > > > Thanks,
> > > > > > Sanjay
> > > > > >
> > > > > > On Fri, Oct 1, 2010 at 11:06 AM, sanjay kushwaha
> > > > > > <[1][7]sanjay.kushwaha@gmail.com> wrote:
> > > > > >
> > > > > > havent tried stable-2.6.32.x on Radeon. It works with
> nomodeset
> > > and
> > > > > > nopat options with stable-2.6.33.x branch.
> > > > > >
> > > > > > On Fri, Oct 1, 2010 at 10:57 AM, Konrad Rzeszutek Wilk
> > > > > > <[2][8]konrad.wilk@oracle.com> wrote:
> > > > > >
> > > > > > On Fri, Oct 01, 2010 at 10:06:48AM -0700, sanjay
> kushwaha
> > > wrote:
> > > > > > > When I dont use nomodeset option, dom0 boots fine X
> runs
> > > > > properly.
> > > > > > So Fedora
> > > > > > > 13 (X86_64) distro with stable-2.6.32.x pvops kernel
> and
> > > > > > xen-unstable works
> > > > > > > fine for i915 without nomodeset option.
> > > > > >
> > > > > > Good to hear it works for you.
> > > > > >
> > > > > > What about your radeon laptop?
> > > > > > >
> > > > > > > Thanks,
> > > > > > > Sanjay
> > > > > > >
> > > > > > > On Wed, Sep 29, 2010 at 3:56 PM, sanjay kushwaha
> > > > > > > <[3][9]sanjay.kushwaha@gmail.com>wrote:
> > > > > > >
> > > > > > > > Hi Jeremy,
> > > > > > > > I switched to stable-2.6.32.x branch (which is
> 2.6.32.21
> > > > > based)
> > > > > > but I get
> > > > > > > > the same problem. Attached is the Xorg.0.log file
> when I
> > > > > booted
> > > > > > with
> > > > > > > > nomodeset option.
> > > > > > > >
> > > > > > > > interestingly I did not see any kernel or driver
> crash
> > > > > messages in
> > > > > > the
> > > > > > > > dmesg output. I do see these messages multiple
> times in
> > > > > > /var/log/messages
> > > > > > > > *
> > > > > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> > > GdmDisplay:
> > > > > > display
> > > > > > > > lasted 0.048984 seconds
> > > > > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> > > > > > GdmLocalDisplayFactory:
> > > > > > > > maximum number of X display failures reached: check
> X
> > > server
> > > > > log
> > > > > > for errors
> > > > > > > > *
> > > > > > > >
> > > > > > > > Thanks,
> > > > > > > > Sanjay
> > > > > > > >
> > > > > > > >
> > > > > > > > On Wed, Sep 29, 2010 at 11:57 AM, Jeremy
> Fitzhardinge
> > > > > > <[4][10]jeremy@goop.org>wrote:
> > > > > > > >
> > > > > > > >> On 09/29/2010 11:12 AM, sanjay kushwaha wrote:
> > > > > > > >> > Hi Folks,
> > > > > > > >> > I am trying to boot latest xen-unstable on my
> laptop
> > > which
> > > > > has
> > > > > > Intel
> > > > > > > >> > i915 graphics. PVOPS dom0 is 2.6.33.6 based
> (from
> > > branch
> > > > > > > >> > xen/stable-2.6.33.x)
> > > > > > > >>
> > > > > > > >> Don't use that branch; it isn't supported (in
> fact, I
> > > deleted
> > > > > it
> > > > > > a while
> > > > > > > >> ago). Use xen/stable-2.6.32.x for now.
> > > > > > > >>
> > > > > > > >> J
> > > > > > > >>
> > > > > > > >> > and the distro is fedora 13 64-bit. The graphics
> doesnt
> > > > > come up
> > > > > > and it
> > > > > > > >> > seems that i915 driver is crashing multiple
> times. If I
> > > > > boot in
> > > > > > > >> > run-level 3 (without X) dom0 boots fine.
> > > > > > > >> > I tried booting the dom0 kernel with nomodeset
> and
> > > nopat
> > > > > > options
> > > > > > > >> > without any success. I searched on internet and
> found
> > > that
> > > > > > multiple
> > > > > > > >> > people have reported similar problem but I could
> not
> > > find
> > > > > any
> > > > > > solution.
> > > > > > > >> >
> > > > > > > >> > Has anybody found a solution or workaround to
> this
> > > problem?
> > > > > > > >> >
> > > > > > > >> > Thanks,
> > > > > > > >> > Sanjay
> > > > > > > >> >
> > > > > > > >> > PS: I have another laptop with same version of
> xen and
> > > > > pvops
> > > > > > dom0 but
> > > > > > > >> > it has ATI radeon graphics card. This laptop
> boots dom0
> > > > > with
> > > > > > graphics
> > > > > > > >> > when I give nomodeset and nopat options (but
> fails if I
> > > > > dont
> > > > > > give
> > > > > > > >> > either of those two options).
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> > _______________________________________________
> > > > > > > >> > Xen-devel mailing list
> > > > > > > >> > [5][11]Xen-devel@lists.xensource.com
> > > > > > > >> > [6][12]http://lists.xensource.com/xen-devel
> > > > > > > >>
> > > > > > > >>
> > > > > > > >
> > > > > >
> > > > > > > _______________________________________________
> > > > > > > Xen-devel mailing list
> > > > > > > [7][13]Xen-devel@lists.xensource.com
> > > > > > > [8][14]http://lists.xensource.com/xen-devel
> > > > > >
> > > > > > --
> > > > > > ----------------------
> > > > > > Dr. Sanjay Kumar
> > > > > > Research Scientist
> > > > > > Intel Corporation
> > > > > >
> > > > > > --
> > > > > > ----------------------
> > > > > > Dr. Sanjay Kumar
> > > > > > Research Scientist
> > > > > > Intel Corporation
> > > > > >
> > > > > > References
> > > > > >
> > > > > > Visible links
> > > > > > 1. mailto:[15]sanjay.kushwaha@gmail.com
> > > > > > 2. mailto:[16]konrad.wilk@oracle.com
> > > > > > 3. mailto:[17]sanjay.kushwaha@gmail.com
> > > > > > 4. mailto:[18]jeremy@goop.org
> > > > > > 5. mailto:[19]Xen-devel@lists.xensource.com
> > > > > > 6. [20]http://lists.xensource.com/xen-devel
> > > > > > 7. mailto:[21]Xen-devel@lists.xensource.com
> > > > > > 8. [22]http://lists.xensource.com/xen-devel
> > > > >
> > > > > > _______________________________________________
> > > > > > Xen-devel mailing list
> > > > > > [23]Xen-devel@lists.xensource.com
> > > > > > [24]http://lists.xensource.com/xen-devel
> > > > >
> > > > >
> > > >
> > > >
> > > > --
> > > > ----------------------
> > > > Dr. Sanjay Kumar
> > > > Research Scientist
> > > > Intel Corporation
> > >
> >
> >
> >
> > --
> > ----------------------
> > Dr. Sanjay Kumar
> > Research Scientist
> > Intel Corporation
>
> > _______________________________________________
> > Xen-devel mailing list
> > [25]Xen-devel@lists.xensource.com
> > [26]http://lists.xensource.com/xen-devel
>
> --
> ----------------------
> Dr. Sanjay Kumar
> Research Scientist
> Intel Corporation
>
> References
>
> Visible links
> 1. mailto:konrad.wilk@oracle.com
> 2. mailto:konrad.wilk@oracle.com
> 3. http://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git
> 4. mailto:jeremy.fitzhardinge@citrix.com
> 5. mailto:pasik@iki.fi
> 6. http://wiki.xensource.com/xenwiki/XenPVOPSDRM
> 7. mailto:sanjay.kushwaha@gmail.com
> 8. mailto:konrad.wilk@oracle.com
> 9. mailto:sanjay.kushwaha@gmail.com
> 10. mailto:jeremy@goop.org
> 11. mailto:Xen-devel@lists.xensource.com
> 12. http://lists.xensource.com/xen-devel
> 13. mailto:Xen-devel@lists.xensource.com
> 14. http://lists.xensource.com/xen-devel
> 15. mailto:sanjay.kushwaha@gmail.com
> 16. mailto:konrad.wilk@oracle.com
> 17. mailto:sanjay.kushwaha@gmail.com
> 18. mailto:jeremy@goop.org
> 19. mailto:Xen-devel@lists.xensource.com
> 20. http://lists.xensource.com/xen-devel
> 21. mailto:Xen-devel@lists.xensource.com
> 22. http://lists.xensource.com/xen-devel
> 23. mailto:Xen-devel@lists.xensource.com
> 24. http://lists.xensource.com/xen-devel
> 25. mailto:Xen-devel@lists.xensource.com
> 26. http://lists.xensource.com/xen-devel
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 19+ messages in thread
* RE: pvops Dom0 graphics doesnt work with Intel i915
2010-10-07 19:12 ` sanjay kushwaha
2010-10-07 19:33 ` Pasi Kärkkäinen
@ 2010-10-07 22:05 ` Kay, Allen M
2010-10-07 22:44 ` sanjay kushwaha
1 sibling, 1 reply; 19+ messages in thread
From: Kay, Allen M @ 2010-10-07 22:05 UTC (permalink / raw)
To: sanjay kushwaha, Konrad Rzeszutek Wilk; +Cc: Jeremy Fitzhardinge, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 11403 bytes --]
Sanjay,
Have you tried the latest xen-unstable staging tree? It has a workaround for T410 VT-d graphics issue caused by Lenovo BIOS. This might be the workaround you need:
http://xenbits.xensource.com/staging/xen-unstable.hg?rev/4beee5779122
Allen
From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of sanjay kushwaha
Sent: Thursday, October 07, 2010 12:13 PM
To: Konrad Rzeszutek Wilk
Cc: Jeremy Fitzhardinge; xen-devel
Subject: Re: [Xen-devel] pvops Dom0 graphics doesnt work with Intel i915
Hi Konrad,
Unfortunately T410 doesnt have a serial port and neither does the docking station. I havent had any success with USB-to-Serial port dongles in the past. is there any way to get the serial port output?
Thanks,
Sanjay
On Thu, Oct 7, 2010 at 11:05 AM, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com<mailto:konrad.wilk@oracle.com>> wrote:
On Thu, Oct 07, 2010 at 10:36:34AM -0700, sanjay kushwaha wrote:
> Hi Konrad,
> I tried your tree. It created a 2.6.32.15 based pvops kernel but graphics
> with VT-d still doesn't work. when I give iommu=0 on xen kernel command line
> in grub menu, graphics works but with iommu=1 it doesnt work (The whole
> screen is garbage).
Are there any warnings/debug messages in the serial log? Please follow
the PVOPS Wiki on how to enable all the debug options.
>
>
> On Wed, Oct 6, 2010 at 6:07 PM, Konrad Rzeszutek Wilk <
> konrad.wilk@oracle.com<mailto:konrad.wilk@oracle.com>> wrote:
>
> > On Wed, Oct 06, 2010 at 04:02:51PM -0700, sanjay kushwaha wrote:
> > > Thanks Pasi.
> > >
> > > Hi Konrad,
> > > Could you please let me know how to get these backported drivers as
> > > indicated by Pasi? This is the tree that I have.
> >
> > Just follow the Wiki. Oh, I need to update it.
> >
> > Here do this:
> >
> > git remote add konrad git://
> > git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git<http://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git>
> >
> > git pull konrad
> > git checkout konrad/devel/next.drm
> >
> > make
> >
> > >
> > > [evans@vwifi0 linux-2.6.32.x]$ git show
> > > commit b297cdac0373625d3cd0e6f2b393570dcf2edba6
> > > Merge: c6cfd01 64392f6
> > > Author: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com<mailto:jeremy.fitzhardinge@citrix.com>>
> > > Date: Mon Sep 13 14:27:24 2010 -0700
> > >
> > > Merge branch 'xen/next' into xen/next-2.6.32
> > >
> > > * xen/next:
> > > xen/netfront: Fix another potential race condition
> > > Revert "xen/netfront: default smartpoll to on"
> > >
> > > [evans@vwifi0 linux-2.6.32.x]$
> > >
> > >
> > > Thanks,
> > > Sanjay
> > >
> > > On Wed, Oct 6, 2010 at 1:12 PM, Pasi Kärkkäinen <pasik@iki.fi<mailto:pasik@iki.fi>> wrote:
> > >
> > > > On Wed, Oct 06, 2010 at 10:50:57AM -0700, sanjay kushwaha wrote:
> > > > > Hi,
> > > > > I have run into more problems now. This time with VT-d.
> > > > > When I enable VT-d on this laptop, graphics again stops working in
> > > > dom0
> > > > > with pvops (linux 2.6.32.21). the screen starts showing garbage as
> > > > soon as
> > > > > it switches into graphics mode.this happens when I boot the pvops
> > > > kernel
> > > > > both as dom0 and native linux. However, when I try 2.6.33 based
> > pvops
> > > > > kernel (stable-2.6.33.x) graphics seems to work fine with VT-d
> > when
> > > > > running native but it doesnt work when running as Dom0.
> > > > >
> > > > > so now the problem is:
> > > > >
> > > > > with stable-2.6.32.x: graphics works in Dom0 without Vt-d but not
> > with
> > > > > VT-d (neither native nor Dom0).
> > > > > with stable-2.6.33.x: graphics works with VT-d when running native
> > but
> > > > > doesnt work when running as Dom0 (with or without VT-d).
> > > > >
> > > >
> > > > stable-2.6.33.x is not maintained, and you shouldn't use it.
> > > >
> > > > I think Konrad has a backport of the 2.6.34 drm/dri drivers
> > > > to stable-2.6.32.x somewhere.. that might help.
> > > >
> > > > http://wiki.xensource.com/xenwiki/XenPVOPSDRM
> > > >
> > > > -- Pasi
> > > >
> > > > > I am experiencing this problem both with Lenovo T410, and Dell
> > > > latitude
> > > > > E6410.
> > > > > Has anybody experienced this problem?
> > > > >
> > > > > Thanks,
> > > > > Sanjay
> > > > >
> > > > > On Fri, Oct 1, 2010 at 11:06 AM, sanjay kushwaha
> > > > > <[1]sanjay.kushwaha@gmail.com<mailto:sanjay.kushwaha@gmail.com>> wrote:
> > > > >
> > > > > havent tried stable-2.6.32.x on Radeon. It works with nomodeset
> > and
> > > > > nopat options with stable-2.6.33.x branch.
> > > > >
> > > > > On Fri, Oct 1, 2010 at 10:57 AM, Konrad Rzeszutek Wilk
> > > > > <[2]konrad.wilk@oracle.com<mailto:konrad.wilk@oracle.com>> wrote:
> > > > >
> > > > > On Fri, Oct 01, 2010 at 10:06:48AM -0700, sanjay kushwaha
> > wrote:
> > > > > > When I dont use nomodeset option, dom0 boots fine X runs
> > > > properly.
> > > > > So Fedora
> > > > > > 13 (X86_64) distro with stable-2.6.32.x pvops kernel and
> > > > > xen-unstable works
> > > > > > fine for i915 without nomodeset option.
> > > > >
> > > > > Good to hear it works for you.
> > > > >
> > > > > What about your radeon laptop?
> > > > > >
> > > > > > Thanks,
> > > > > > Sanjay
> > > > > >
> > > > > > On Wed, Sep 29, 2010 at 3:56 PM, sanjay kushwaha
> > > > > > <[3]sanjay.kushwaha@gmail.com<mailto:sanjay.kushwaha@gmail.com>>wrote:
> > > > > >
> > > > > > > Hi Jeremy,
> > > > > > > I switched to stable-2.6.32.x branch (which is 2.6.32.21
> > > > based)
> > > > > but I get
> > > > > > > the same problem. Attached is the Xorg.0.log file when I
> > > > booted
> > > > > with
> > > > > > > nomodeset option.
> > > > > > >
> > > > > > > interestingly I did not see any kernel or driver crash
> > > > messages in
> > > > > the
> > > > > > > dmesg output. I do see these messages multiple times in
> > > > > /var/log/messages
> > > > > > > *
> > > > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> > GdmDisplay:
> > > > > display
> > > > > > > lasted 0.048984 seconds
> > > > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> > > > > GdmLocalDisplayFactory:
> > > > > > > maximum number of X display failures reached: check X
> > server
> > > > log
> > > > > for errors
> > > > > > > *
> > > > > > >
> > > > > > > Thanks,
> > > > > > > Sanjay
> > > > > > >
> > > > > > >
> > > > > > > On Wed, Sep 29, 2010 at 11:57 AM, Jeremy Fitzhardinge
> > > > > <[4]jeremy@goop.org<mailto:jeremy@goop.org>>wrote:
> > > > > > >
> > > > > > >> On 09/29/2010 11:12 AM, sanjay kushwaha wrote:
> > > > > > >> > Hi Folks,
> > > > > > >> > I am trying to boot latest xen-unstable on my laptop
> > which
> > > > has
> > > > > Intel
> > > > > > >> > i915 graphics. PVOPS dom0 is 2.6.33.6 based (from
> > branch
> > > > > > >> > xen/stable-2.6.33.x)
> > > > > > >>
> > > > > > >> Don't use that branch; it isn't supported (in fact, I
> > deleted
> > > > it
> > > > > a while
> > > > > > >> ago). Use xen/stable-2.6.32.x for now.
> > > > > > >>
> > > > > > >> J
> > > > > > >>
> > > > > > >> > and the distro is fedora 13 64-bit. The graphics doesnt
> > > > come up
> > > > > and it
> > > > > > >> > seems that i915 driver is crashing multiple times. If I
> > > > boot in
> > > > > > >> > run-level 3 (without X) dom0 boots fine.
> > > > > > >> > I tried booting the dom0 kernel with nomodeset and
> > nopat
> > > > > options
> > > > > > >> > without any success. I searched on internet and found
> > that
> > > > > multiple
> > > > > > >> > people have reported similar problem but I could not
> > find
> > > > any
> > > > > solution.
> > > > > > >> >
> > > > > > >> > Has anybody found a solution or workaround to this
> > problem?
> > > > > > >> >
> > > > > > >> > Thanks,
> > > > > > >> > Sanjay
> > > > > > >> >
> > > > > > >> > PS: I have another laptop with same version of xen and
> > > > pvops
> > > > > dom0 but
> > > > > > >> > it has ATI radeon graphics card. This laptop boots dom0
> > > > with
> > > > > graphics
> > > > > > >> > when I give nomodeset and nopat options (but fails if I
> > > > dont
> > > > > give
> > > > > > >> > either of those two options).
> > > > > > >> >
> > > > > > >> >
> > > > > > >> >
> > > > > > >> > _______________________________________________
> > > > > > >> > Xen-devel mailing list
> > > > > > >> > [5]Xen-devel@lists.xensource.com<mailto:Xen-devel@lists.xensource.com>
> > > > > > >> > [6]http://lists.xensource.com/xen-devel
> > > > > > >>
> > > > > > >>
> > > > > > >
> > > > >
> > > > > > _______________________________________________
> > > > > > Xen-devel mailing list
> > > > > > [7]Xen-devel@lists.xensource.com<mailto:Xen-devel@lists.xensource.com>
> > > > > > [8]http://lists.xensource.com/xen-devel
> > > > >
> > > > > --
> > > > > ----------------------
> > > > > Dr. Sanjay Kumar
> > > > > Research Scientist
> > > > > Intel Corporation
> > > > >
> > > > > --
> > > > > ----------------------
> > > > > Dr. Sanjay Kumar
> > > > > Research Scientist
> > > > > Intel Corporation
> > > > >
> > > > > References
> > > > >
> > > > > Visible links
> > > > > 1. mailto:sanjay.kushwaha@gmail.com<mailto:sanjay.kushwaha@gmail.com>
> > > > > 2. mailto:konrad.wilk@oracle.com<mailto:konrad.wilk@oracle.com>
> > > > > 3. mailto:sanjay.kushwaha@gmail.com<mailto:sanjay.kushwaha@gmail.com>
> > > > > 4. mailto:jeremy@goop.org<mailto:jeremy@goop.org>
> > > > > 5. mailto:Xen-devel@lists.xensource.com<mailto:Xen-devel@lists.xensource.com>
> > > > > 6. http://lists.xensource.com/xen-devel
> > > > > 7. mailto:Xen-devel@lists.xensource.com<mailto:Xen-devel@lists.xensource.com>
> > > > > 8. http://lists.xensource.com/xen-devel
> > > >
> > > > > _______________________________________________
> > > > > Xen-devel mailing list
> > > > > Xen-devel@lists.xensource.com<mailto:Xen-devel@lists.xensource.com>
> > > > > http://lists.xensource.com/xen-devel
> > > >
> > > >
> > >
> > >
> > > --
> > > ----------------------
> > > Dr. Sanjay Kumar
> > > Research Scientist
> > > Intel Corporation
> >
>
>
>
> --
> ----------------------
> Dr. Sanjay Kumar
> Research Scientist
> Intel Corporation
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com<mailto:Xen-devel@lists.xensource.com>
> http://lists.xensource.com/xen-devel
--
----------------------
Dr. Sanjay Kumar
Research Scientist
Intel Corporation
[-- Attachment #1.2: Type: text/html, Size: 23208 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: pvops Dom0 graphics doesnt work with Intel i915
2010-10-07 22:05 ` Kay, Allen M
@ 2010-10-07 22:44 ` sanjay kushwaha
2010-11-06 17:21 ` sanjay kushwaha
0 siblings, 1 reply; 19+ messages in thread
From: sanjay kushwaha @ 2010-10-07 22:44 UTC (permalink / raw)
To: Kay, Allen M; +Cc: Jeremy Fitzhardinge, xen-devel, Konrad Rzeszutek Wilk
[-- Attachment #1.1: Type: text/plain, Size: 11775 bytes --]
Hi Allen,
Indeed I needed this workaround. Now graphics works fine with VT-d with this
xen tree.
Thanks,
Sanjay
On Thu, Oct 7, 2010 at 3:05 PM, Kay, Allen M <allen.m.kay@intel.com> wrote:
> Sanjay,
>
>
>
> Have you tried the latest xen-unstable staging tree? It has a workaround
> for T410 VT-d graphics issue caused by Lenovo BIOS. This might be the
> workaround you need:
>
>
>
> http://xenbits.xensource.com/staging/xen-unstable.hg?rev/4beee5779122
>
>
>
> Allen
>
>
>
> *From:* xen-devel-bounces@lists.xensource.com [mailto:
> xen-devel-bounces@lists.xensource.com] *On Behalf Of *sanjay kushwaha
> *Sent:* Thursday, October 07, 2010 12:13 PM
> *To:* Konrad Rzeszutek Wilk
> *Cc:* Jeremy Fitzhardinge; xen-devel
> *Subject:* Re: [Xen-devel] pvops Dom0 graphics doesnt work with Intel i915
>
>
>
> Hi Konrad,
> Unfortunately T410 doesnt have a serial port and neither does the docking
> station. I havent had any success with USB-to-Serial port dongles in the
> past. is there any way to get the serial port output?
>
> Thanks,
> Sanjay
>
> On Thu, Oct 7, 2010 at 11:05 AM, Konrad Rzeszutek Wilk <
> konrad.wilk@oracle.com> wrote:
>
> On Thu, Oct 07, 2010 at 10:36:34AM -0700, sanjay kushwaha wrote:
> > Hi Konrad,
> > I tried your tree. It created a 2.6.32.15 based pvops kernel but graphics
> > with VT-d still doesn't work. when I give iommu=0 on xen kernel command
> line
> > in grub menu, graphics works but with iommu=1 it doesnt work (The whole
> > screen is garbage).
>
> Are there any warnings/debug messages in the serial log? Please follow
> the PVOPS Wiki on how to enable all the debug options.
>
> >
> >
> > On Wed, Oct 6, 2010 at 6:07 PM, Konrad Rzeszutek Wilk <
> > konrad.wilk@oracle.com> wrote:
> >
> > > On Wed, Oct 06, 2010 at 04:02:51PM -0700, sanjay kushwaha wrote:
> > > > Thanks Pasi.
> > > >
> > > > Hi Konrad,
> > > > Could you please let me know how to get these backported drivers as
> > > > indicated by Pasi? This is the tree that I have.
> > >
> > > Just follow the Wiki. Oh, I need to update it.
> > >
> > > Here do this:
> > >
> > > git remote add konrad git://
> > > git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git
> > >
> > > git pull konrad
> > > git checkout konrad/devel/next.drm
> > >
> > > make
> > >
> > > >
> > > > [evans@vwifi0 linux-2.6.32.x]$ git show
> > > > commit b297cdac0373625d3cd0e6f2b393570dcf2edba6
> > > > Merge: c6cfd01 64392f6
> > > > Author: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
> > > > Date: Mon Sep 13 14:27:24 2010 -0700
> > > >
> > > > Merge branch 'xen/next' into xen/next-2.6.32
> > > >
> > > > * xen/next:
> > > > xen/netfront: Fix another potential race condition
> > > > Revert "xen/netfront: default smartpoll to on"
> > > >
> > > > [evans@vwifi0 linux-2.6.32.x]$
> > > >
> > > >
> > > > Thanks,
> > > > Sanjay
> > > >
> > > > On Wed, Oct 6, 2010 at 1:12 PM, Pasi Kärkkäinen <pasik@iki.fi>
> wrote:
> > > >
> > > > > On Wed, Oct 06, 2010 at 10:50:57AM -0700, sanjay kushwaha wrote:
> > > > > > Hi,
> > > > > > I have run into more problems now. This time with VT-d.
> > > > > > When I enable VT-d on this laptop, graphics again stops
> working in
> > > > > dom0
> > > > > > with pvops (linux 2.6.32.21). the screen starts showing
> garbage as
> > > > > soon as
> > > > > > it switches into graphics mode.this happens when I boot the
> pvops
> > > > > kernel
> > > > > > both as dom0 and native linux. However, when I try 2.6.33
> based
> > > pvops
> > > > > > kernel (stable-2.6.33.x) graphics seems to work fine with VT-d
> > > when
> > > > > > running native but it doesnt work when running as Dom0.
> > > > > >
> > > > > > so now the problem is:
> > > > > >
> > > > > > with stable-2.6.32.x: graphics works in Dom0 without Vt-d but
> not
> > > with
> > > > > > VT-d (neither native nor Dom0).
> > > > > > with stable-2.6.33.x: graphics works with VT-d when running
> native
> > > but
> > > > > > doesnt work when running as Dom0 (with or without VT-d).
> > > > > >
> > > > >
> > > > > stable-2.6.33.x is not maintained, and you shouldn't use it.
> > > > >
> > > > > I think Konrad has a backport of the 2.6.34 drm/dri drivers
> > > > > to stable-2.6.32.x somewhere.. that might help.
> > > > >
> > > > > http://wiki.xensource.com/xenwiki/XenPVOPSDRM
> > > > >
> > > > > -- Pasi
> > > > >
> > > > > > I am experiencing this problem both with Lenovo T410, and Dell
> > > > > latitude
> > > > > > E6410.
> > > > > > Has anybody experienced this problem?
> > > > > >
> > > > > > Thanks,
> > > > > > Sanjay
> > > > > >
> > > > > > On Fri, Oct 1, 2010 at 11:06 AM, sanjay kushwaha
> > > > > > <[1]sanjay.kushwaha@gmail.com> wrote:
> > > > > >
> > > > > > havent tried stable-2.6.32.x on Radeon. It works with
> nomodeset
> > > and
> > > > > > nopat options with stable-2.6.33.x branch.
> > > > > >
> > > > > > On Fri, Oct 1, 2010 at 10:57 AM, Konrad Rzeszutek Wilk
> > > > > > <[2]konrad.wilk@oracle.com> wrote:
> > > > > >
> > > > > > On Fri, Oct 01, 2010 at 10:06:48AM -0700, sanjay kushwaha
> > > wrote:
> > > > > > > When I dont use nomodeset option, dom0 boots fine X runs
> > > > > properly.
> > > > > > So Fedora
> > > > > > > 13 (X86_64) distro with stable-2.6.32.x pvops kernel and
> > > > > > xen-unstable works
> > > > > > > fine for i915 without nomodeset option.
> > > > > >
> > > > > > Good to hear it works for you.
> > > > > >
> > > > > > What about your radeon laptop?
> > > > > > >
> > > > > > > Thanks,
> > > > > > > Sanjay
> > > > > > >
> > > > > > > On Wed, Sep 29, 2010 at 3:56 PM, sanjay kushwaha
> > > > > > > <[3]sanjay.kushwaha@gmail.com>wrote:
> > > > > > >
> > > > > > > > Hi Jeremy,
> > > > > > > > I switched to stable-2.6.32.x branch (which is
> 2.6.32.21
> > > > > based)
> > > > > > but I get
> > > > > > > > the same problem. Attached is the Xorg.0.log file when
> I
> > > > > booted
> > > > > > with
> > > > > > > > nomodeset option.
> > > > > > > >
> > > > > > > > interestingly I did not see any kernel or driver crash
> > > > > messages in
> > > > > > the
> > > > > > > > dmesg output. I do see these messages multiple times
> in
> > > > > > /var/log/messages
> > > > > > > > *
> > > > > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> > > GdmDisplay:
> > > > > > display
> > > > > > > > lasted 0.048984 seconds
> > > > > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> > > > > > GdmLocalDisplayFactory:
> > > > > > > > maximum number of X display failures reached: check X
> > > server
> > > > > log
> > > > > > for errors
> > > > > > > > *
> > > > > > > >
> > > > > > > > Thanks,
> > > > > > > > Sanjay
> > > > > > > >
> > > > > > > >
> > > > > > > > On Wed, Sep 29, 2010 at 11:57 AM, Jeremy Fitzhardinge
> > > > > > <[4]jeremy@goop.org>wrote:
> > > > > > > >
> > > > > > > >> On 09/29/2010 11:12 AM, sanjay kushwaha wrote:
> > > > > > > >> > Hi Folks,
> > > > > > > >> > I am trying to boot latest xen-unstable on my
> laptop
> > > which
> > > > > has
> > > > > > Intel
> > > > > > > >> > i915 graphics. PVOPS dom0 is 2.6.33.6 based (from
> > > branch
> > > > > > > >> > xen/stable-2.6.33.x)
> > > > > > > >>
> > > > > > > >> Don't use that branch; it isn't supported (in fact, I
> > > deleted
> > > > > it
> > > > > > a while
> > > > > > > >> ago). Use xen/stable-2.6.32.x for now.
> > > > > > > >>
> > > > > > > >> J
> > > > > > > >>
> > > > > > > >> > and the distro is fedora 13 64-bit. The graphics
> doesnt
> > > > > come up
> > > > > > and it
> > > > > > > >> > seems that i915 driver is crashing multiple times.
> If I
> > > > > boot in
> > > > > > > >> > run-level 3 (without X) dom0 boots fine.
> > > > > > > >> > I tried booting the dom0 kernel with nomodeset and
> > > nopat
> > > > > > options
> > > > > > > >> > without any success. I searched on internet and
> found
> > > that
> > > > > > multiple
> > > > > > > >> > people have reported similar problem but I could
> not
> > > find
> > > > > any
> > > > > > solution.
> > > > > > > >> >
> > > > > > > >> > Has anybody found a solution or workaround to this
> > > problem?
> > > > > > > >> >
> > > > > > > >> > Thanks,
> > > > > > > >> > Sanjay
> > > > > > > >> >
> > > > > > > >> > PS: I have another laptop with same version of xen
> and
> > > > > pvops
> > > > > > dom0 but
> > > > > > > >> > it has ATI radeon graphics card. This laptop boots
> dom0
> > > > > with
> > > > > > graphics
> > > > > > > >> > when I give nomodeset and nopat options (but fails
> if I
> > > > > dont
> > > > > > give
> > > > > > > >> > either of those two options).
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> > _______________________________________________
> > > > > > > >> > Xen-devel mailing list
> > > > > > > >> > [5]Xen-devel@lists.xensource.com
> > > > > > > >> > [6]http://lists.xensource.com/xen-devel
> > > > > > > >>
> > > > > > > >>
> > > > > > > >
> > > > > >
> > > > > > > _______________________________________________
> > > > > > > Xen-devel mailing list
> > > > > > > [7]Xen-devel@lists.xensource.com
> > > > > > > [8]http://lists.xensource.com/xen-devel
> > > > > >
> > > > > > --
> > > > > > ----------------------
> > > > > > Dr. Sanjay Kumar
> > > > > > Research Scientist
> > > > > > Intel Corporation
> > > > > >
> > > > > > --
> > > > > > ----------------------
> > > > > > Dr. Sanjay Kumar
> > > > > > Research Scientist
> > > > > > Intel Corporation
> > > > > >
> > > > > > References
> > > > > >
> > > > > > Visible links
> > > > > > 1. mailto:sanjay.kushwaha@gmail.com
> > > > > > 2. mailto:konrad.wilk@oracle.com
> > > > > > 3. mailto:sanjay.kushwaha@gmail.com
> > > > > > 4. mailto:jeremy@goop.org
> > > > > > 5. mailto:Xen-devel@lists.xensource.com
> > > > > > 6. http://lists.xensource.com/xen-devel
> > > > > > 7. mailto:Xen-devel@lists.xensource.com
> > > > > > 8. http://lists.xensource.com/xen-devel
> > > > >
> > > > > > _______________________________________________
> > > > > > Xen-devel mailing list
> > > > > > Xen-devel@lists.xensource.com
> > > > > > http://lists.xensource.com/xen-devel
> > > > >
> > > > >
> > > >
> > > >
> > > > --
> > > > ----------------------
> > > > Dr. Sanjay Kumar
> > > > Research Scientist
> > > > Intel Corporation
> > >
> >
> >
> >
> > --
> > ----------------------
> > Dr. Sanjay Kumar
> > Research Scientist
> > Intel Corporation
>
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xensource.com
> > http://lists.xensource.com/xen-devel
>
>
>
>
> --
> ----------------------
> Dr. Sanjay Kumar
> Research Scientist
> Intel Corporation
>
--
----------------------
Dr. Sanjay Kumar
Research Scientist
Intel Corporation
[-- Attachment #1.2: Type: text/html, Size: 19961 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: pvops Dom0 graphics doesnt work with Intel i915
2010-10-07 22:44 ` sanjay kushwaha
@ 2010-11-06 17:21 ` sanjay kushwaha
2010-11-07 6:22 ` Kay, Allen M
0 siblings, 1 reply; 19+ messages in thread
From: sanjay kushwaha @ 2010-11-06 17:21 UTC (permalink / raw)
To: Kay, Allen M; +Cc: Jeremy Fitzhardinge, xen-devel, Konrad Rzeszutek Wilk
[-- Attachment #1.1: Type: text/plain, Size: 12718 bytes --]
Hi Allen,
So this may not be the correct forum to ask this question but I am wondering
if a similar workaround has been developed for VT-d in Linux kernel for this
problem.
I am trying to boot pvops Linux as Native Linux (2.6.32.21) with VT-d on
Lenovo T410 and Intel graphics is not working.
Can someone please let me know?
Thanks,
Sanjay
On Thu, Oct 7, 2010 at 3:44 PM, sanjay kushwaha
<sanjay.kushwaha@gmail.com>wrote:
> Hi Allen,
> Indeed I needed this workaround. Now graphics works fine with VT-d with
> this xen tree.
>
> Thanks,
> Sanjay
>
>
> On Thu, Oct 7, 2010 at 3:05 PM, Kay, Allen M <allen.m.kay@intel.com>wrote:
>
>> Sanjay,
>>
>>
>>
>> Have you tried the latest xen-unstable staging tree? It has a workaround
>> for T410 VT-d graphics issue caused by Lenovo BIOS. This might be the
>> workaround you need:
>>
>>
>>
>> http://xenbits.xensource.com/staging/xen-unstable.hg?rev/4beee5779122
>>
>>
>>
>> Allen
>>
>>
>>
>> *From:* xen-devel-bounces@lists.xensource.com [mailto:
>> xen-devel-bounces@lists.xensource.com] *On Behalf Of *sanjay kushwaha
>> *Sent:* Thursday, October 07, 2010 12:13 PM
>> *To:* Konrad Rzeszutek Wilk
>> *Cc:* Jeremy Fitzhardinge; xen-devel
>> *Subject:* Re: [Xen-devel] pvops Dom0 graphics doesnt work with Intel
>> i915
>>
>>
>>
>> Hi Konrad,
>> Unfortunately T410 doesnt have a serial port and neither does the docking
>> station. I havent had any success with USB-to-Serial port dongles in the
>> past. is there any way to get the serial port output?
>>
>> Thanks,
>> Sanjay
>>
>> On Thu, Oct 7, 2010 at 11:05 AM, Konrad Rzeszutek Wilk <
>> konrad.wilk@oracle.com> wrote:
>>
>> On Thu, Oct 07, 2010 at 10:36:34AM -0700, sanjay kushwaha wrote:
>> > Hi Konrad,
>> > I tried your tree. It created a 2.6.32.15 based pvops kernel but
>> graphics
>> > with VT-d still doesn't work. when I give iommu=0 on xen kernel command
>> line
>> > in grub menu, graphics works but with iommu=1 it doesnt work (The whole
>> > screen is garbage).
>>
>> Are there any warnings/debug messages in the serial log? Please follow
>> the PVOPS Wiki on how to enable all the debug options.
>>
>> >
>> >
>> > On Wed, Oct 6, 2010 at 6:07 PM, Konrad Rzeszutek Wilk <
>> > konrad.wilk@oracle.com> wrote:
>> >
>> > > On Wed, Oct 06, 2010 at 04:02:51PM -0700, sanjay kushwaha wrote:
>> > > > Thanks Pasi.
>> > > >
>> > > > Hi Konrad,
>> > > > Could you please let me know how to get these backported drivers as
>> > > > indicated by Pasi? This is the tree that I have.
>> > >
>> > > Just follow the Wiki. Oh, I need to update it.
>> > >
>> > > Here do this:
>> > >
>> > > git remote add konrad git://
>> > > git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git
>> > >
>> > > git pull konrad
>> > > git checkout konrad/devel/next.drm
>> > >
>> > > make
>> > >
>> > > >
>> > > > [evans@vwifi0 linux-2.6.32.x]$ git show
>> > > > commit b297cdac0373625d3cd0e6f2b393570dcf2edba6
>> > > > Merge: c6cfd01 64392f6
>> > > > Author: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
>> > > > Date: Mon Sep 13 14:27:24 2010 -0700
>> > > >
>> > > > Merge branch 'xen/next' into xen/next-2.6.32
>> > > >
>> > > > * xen/next:
>> > > > xen/netfront: Fix another potential race condition
>> > > > Revert "xen/netfront: default smartpoll to on"
>> > > >
>> > > > [evans@vwifi0 linux-2.6.32.x]$
>> > > >
>> > > >
>> > > > Thanks,
>> > > > Sanjay
>> > > >
>> > > > On Wed, Oct 6, 2010 at 1:12 PM, Pasi Kärkkäinen <pasik@iki.fi>
>> wrote:
>> > > >
>> > > > > On Wed, Oct 06, 2010 at 10:50:57AM -0700, sanjay kushwaha wrote:
>> > > > > > Hi,
>> > > > > > I have run into more problems now. This time with VT-d.
>> > > > > > When I enable VT-d on this laptop, graphics again stops
>> working in
>> > > > > dom0
>> > > > > > with pvops (linux 2.6.32.21). the screen starts showing
>> garbage as
>> > > > > soon as
>> > > > > > it switches into graphics mode.this happens when I boot the
>> pvops
>> > > > > kernel
>> > > > > > both as dom0 and native linux. However, when I try 2.6.33
>> based
>> > > pvops
>> > > > > > kernel (stable-2.6.33.x) graphics seems to work fine with
>> VT-d
>> > > when
>> > > > > > running native but it doesnt work when running as Dom0.
>> > > > > >
>> > > > > > so now the problem is:
>> > > > > >
>> > > > > > with stable-2.6.32.x: graphics works in Dom0 without Vt-d but
>> not
>> > > with
>> > > > > > VT-d (neither native nor Dom0).
>> > > > > > with stable-2.6.33.x: graphics works with VT-d when running
>> native
>> > > but
>> > > > > > doesnt work when running as Dom0 (with or without VT-d).
>> > > > > >
>> > > > >
>> > > > > stable-2.6.33.x is not maintained, and you shouldn't use it.
>> > > > >
>> > > > > I think Konrad has a backport of the 2.6.34 drm/dri drivers
>> > > > > to stable-2.6.32.x somewhere.. that might help.
>> > > > >
>> > > > > http://wiki.xensource.com/xenwiki/XenPVOPSDRM
>> > > > >
>> > > > > -- Pasi
>> > > > >
>> > > > > > I am experiencing this problem both with Lenovo T410, and
>> Dell
>> > > > > latitude
>> > > > > > E6410.
>> > > > > > Has anybody experienced this problem?
>> > > > > >
>> > > > > > Thanks,
>> > > > > > Sanjay
>> > > > > >
>> > > > > > On Fri, Oct 1, 2010 at 11:06 AM, sanjay kushwaha
>> > > > > > <[1]sanjay.kushwaha@gmail.com> wrote:
>> > > > > >
>> > > > > > havent tried stable-2.6.32.x on Radeon. It works with
>> nomodeset
>> > > and
>> > > > > > nopat options with stable-2.6.33.x branch.
>> > > > > >
>> > > > > > On Fri, Oct 1, 2010 at 10:57 AM, Konrad Rzeszutek Wilk
>> > > > > > <[2]konrad.wilk@oracle.com> wrote:
>> > > > > >
>> > > > > > On Fri, Oct 01, 2010 at 10:06:48AM -0700, sanjay kushwaha
>> > > wrote:
>> > > > > > > When I dont use nomodeset option, dom0 boots fine X
>> runs
>> > > > > properly.
>> > > > > > So Fedora
>> > > > > > > 13 (X86_64) distro with stable-2.6.32.x pvops kernel
>> and
>> > > > > > xen-unstable works
>> > > > > > > fine for i915 without nomodeset option.
>> > > > > >
>> > > > > > Good to hear it works for you.
>> > > > > >
>> > > > > > What about your radeon laptop?
>> > > > > > >
>> > > > > > > Thanks,
>> > > > > > > Sanjay
>> > > > > > >
>> > > > > > > On Wed, Sep 29, 2010 at 3:56 PM, sanjay kushwaha
>> > > > > > > <[3]sanjay.kushwaha@gmail.com>wrote:
>> > > > > > >
>> > > > > > > > Hi Jeremy,
>> > > > > > > > I switched to stable-2.6.32.x branch (which is
>> 2.6.32.21
>> > > > > based)
>> > > > > > but I get
>> > > > > > > > the same problem. Attached is the Xorg.0.log file
>> when I
>> > > > > booted
>> > > > > > with
>> > > > > > > > nomodeset option.
>> > > > > > > >
>> > > > > > > > interestingly I did not see any kernel or driver
>> crash
>> > > > > messages in
>> > > > > > the
>> > > > > > > > dmesg output. I do see these messages multiple times
>> in
>> > > > > > /var/log/messages
>> > > > > > > > *
>> > > > > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
>> > > GdmDisplay:
>> > > > > > display
>> > > > > > > > lasted 0.048984 seconds
>> > > > > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
>> > > > > > GdmLocalDisplayFactory:
>> > > > > > > > maximum number of X display failures reached: check X
>> > > server
>> > > > > log
>> > > > > > for errors
>> > > > > > > > *
>> > > > > > > >
>> > > > > > > > Thanks,
>> > > > > > > > Sanjay
>> > > > > > > >
>> > > > > > > >
>> > > > > > > > On Wed, Sep 29, 2010 at 11:57 AM, Jeremy Fitzhardinge
>> > > > > > <[4]jeremy@goop.org>wrote:
>> > > > > > > >
>> > > > > > > >> On 09/29/2010 11:12 AM, sanjay kushwaha wrote:
>> > > > > > > >> > Hi Folks,
>> > > > > > > >> > I am trying to boot latest xen-unstable on my
>> laptop
>> > > which
>> > > > > has
>> > > > > > Intel
>> > > > > > > >> > i915 graphics. PVOPS dom0 is 2.6.33.6 based (from
>> > > branch
>> > > > > > > >> > xen/stable-2.6.33.x)
>> > > > > > > >>
>> > > > > > > >> Don't use that branch; it isn't supported (in fact,
>> I
>> > > deleted
>> > > > > it
>> > > > > > a while
>> > > > > > > >> ago). Use xen/stable-2.6.32.x for now.
>> > > > > > > >>
>> > > > > > > >> J
>> > > > > > > >>
>> > > > > > > >> > and the distro is fedora 13 64-bit. The graphics
>> doesnt
>> > > > > come up
>> > > > > > and it
>> > > > > > > >> > seems that i915 driver is crashing multiple times.
>> If I
>> > > > > boot in
>> > > > > > > >> > run-level 3 (without X) dom0 boots fine.
>> > > > > > > >> > I tried booting the dom0 kernel with nomodeset and
>> > > nopat
>> > > > > > options
>> > > > > > > >> > without any success. I searched on internet and
>> found
>> > > that
>> > > > > > multiple
>> > > > > > > >> > people have reported similar problem but I could
>> not
>> > > find
>> > > > > any
>> > > > > > solution.
>> > > > > > > >> >
>> > > > > > > >> > Has anybody found a solution or workaround to this
>> > > problem?
>> > > > > > > >> >
>> > > > > > > >> > Thanks,
>> > > > > > > >> > Sanjay
>> > > > > > > >> >
>> > > > > > > >> > PS: I have another laptop with same version of xen
>> and
>> > > > > pvops
>> > > > > > dom0 but
>> > > > > > > >> > it has ATI radeon graphics card. This laptop boots
>> dom0
>> > > > > with
>> > > > > > graphics
>> > > > > > > >> > when I give nomodeset and nopat options (but fails
>> if I
>> > > > > dont
>> > > > > > give
>> > > > > > > >> > either of those two options).
>> > > > > > > >> >
>> > > > > > > >> >
>> > > > > > > >> >
>> > > > > > > >> > _______________________________________________
>> > > > > > > >> > Xen-devel mailing list
>> > > > > > > >> > [5]Xen-devel@lists.xensource.com
>> > > > > > > >> > [6]http://lists.xensource.com/xen-devel
>> > > > > > > >>
>> > > > > > > >>
>> > > > > > > >
>> > > > > >
>> > > > > > > _______________________________________________
>> > > > > > > Xen-devel mailing list
>> > > > > > > [7]Xen-devel@lists.xensource.com
>> > > > > > > [8]http://lists.xensource.com/xen-devel
>> > > > > >
>> > > > > > --
>> > > > > > ----------------------
>> > > > > > Dr. Sanjay Kumar
>> > > > > > Research Scientist
>> > > > > > Intel Corporation
>> > > > > >
>> > > > > > --
>> > > > > > ----------------------
>> > > > > > Dr. Sanjay Kumar
>> > > > > > Research Scientist
>> > > > > > Intel Corporation
>> > > > > >
>> > > > > > References
>> > > > > >
>> > > > > > Visible links
>> > > > > > 1. mailto:sanjay.kushwaha@gmail.com
>> > > > > > 2. mailto:konrad.wilk@oracle.com
>> > > > > > 3. mailto:sanjay.kushwaha@gmail.com
>> > > > > > 4. mailto:jeremy@goop.org
>> > > > > > 5. mailto:Xen-devel@lists.xensource.com
>> > > > > > 6. http://lists.xensource.com/xen-devel
>> > > > > > 7. mailto:Xen-devel@lists.xensource.com
>> > > > > > 8. http://lists.xensource.com/xen-devel
>> > > > >
>> > > > > > _______________________________________________
>> > > > > > Xen-devel mailing list
>> > > > > > Xen-devel@lists.xensource.com
>> > > > > > http://lists.xensource.com/xen-devel
>> > > > >
>> > > > >
>> > > >
>> > > >
>> > > > --
>> > > > ----------------------
>> > > > Dr. Sanjay Kumar
>> > > > Research Scientist
>> > > > Intel Corporation
>> > >
>> >
>> >
>> >
>> > --
>> > ----------------------
>> > Dr. Sanjay Kumar
>> > Research Scientist
>> > Intel Corporation
>>
>> > _______________________________________________
>> > Xen-devel mailing list
>> > Xen-devel@lists.xensource.com
>> > http://lists.xensource.com/xen-devel
>>
>>
>>
>>
>> --
>> ----------------------
>> Dr. Sanjay Kumar
>> Research Scientist
>> Intel Corporation
>>
>
>
>
> --
> ----------------------
> Dr. Sanjay Kumar
> Research Scientist
> Intel Corporation
>
--
----------------------
Dr. Sanjay Kumar
Research Scientist
Intel Corporation
[-- Attachment #1.2: Type: text/html, Size: 20920 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 19+ messages in thread
* RE: pvops Dom0 graphics doesnt work with Intel i915
2010-11-06 17:21 ` sanjay kushwaha
@ 2010-11-07 6:22 ` Kay, Allen M
2010-11-07 18:57 ` sanjay kushwaha
0 siblings, 1 reply; 19+ messages in thread
From: Kay, Allen M @ 2010-11-07 6:22 UTC (permalink / raw)
To: sanjay kushwaha; +Cc: Jeremy Fitzhardinge, xen-devel, Konrad Rzeszutek Wilk
[-- Attachment #1.1: Type: text/plain, Size: 12898 bytes --]
Hi Sanjay,
The fix in Xen was derived from a similar fix in Linux kernel below. It is already part of the latest Linux kernel. Since it was checked in August, it is not in 2.6.32.21 pvops kernel you are using.
https://patchwork.kernel.org/patch/132771/
Allen
From: sanjay kushwaha [mailto:sanjay.kushwaha@gmail.com]
Sent: Saturday, November 06, 2010 10:22 AM
To: Kay, Allen M
Cc: Konrad Rzeszutek Wilk; Jeremy Fitzhardinge; xen-devel
Subject: Re: [Xen-devel] pvops Dom0 graphics doesnt work with Intel i915
Hi Allen,
So this may not be the correct forum to ask this question but I am wondering if a similar workaround has been developed for VT-d in Linux kernel for this problem.
I am trying to boot pvops Linux as Native Linux (2.6.32.21) with VT-d on Lenovo T410 and Intel graphics is not working.
Can someone please let me know?
Thanks,
Sanjay
On Thu, Oct 7, 2010 at 3:44 PM, sanjay kushwaha <sanjay.kushwaha@gmail.com<mailto:sanjay.kushwaha@gmail.com>> wrote:
Hi Allen,
Indeed I needed this workaround. Now graphics works fine with VT-d with this xen tree.
Thanks,
Sanjay
On Thu, Oct 7, 2010 at 3:05 PM, Kay, Allen M <allen.m.kay@intel.com<mailto:allen.m.kay@intel.com>> wrote:
Sanjay,
Have you tried the latest xen-unstable staging tree? It has a workaround for T410 VT-d graphics issue caused by Lenovo BIOS. This might be the workaround you need:
http://xenbits.xensource.com/staging/xen-unstable.hg?rev/4beee5779122
Allen
From: xen-devel-bounces@lists.xensource.com<mailto:xen-devel-bounces@lists.xensource.com> [mailto:xen-devel-bounces@lists.xensource.com<mailto:xen-devel-bounces@lists.xensource.com>] On Behalf Of sanjay kushwaha
Sent: Thursday, October 07, 2010 12:13 PM
To: Konrad Rzeszutek Wilk
Cc: Jeremy Fitzhardinge; xen-devel
Subject: Re: [Xen-devel] pvops Dom0 graphics doesnt work with Intel i915
Hi Konrad,
Unfortunately T410 doesnt have a serial port and neither does the docking station. I havent had any success with USB-to-Serial port dongles in the past. is there any way to get the serial port output?
Thanks,
Sanjay
On Thu, Oct 7, 2010 at 11:05 AM, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com<mailto:konrad.wilk@oracle.com>> wrote:
On Thu, Oct 07, 2010 at 10:36:34AM -0700, sanjay kushwaha wrote:
> Hi Konrad,
> I tried your tree. It created a 2.6.32.15 based pvops kernel but graphics
> with VT-d still doesn't work. when I give iommu=0 on xen kernel command line
> in grub menu, graphics works but with iommu=1 it doesnt work (The whole
> screen is garbage).
Are there any warnings/debug messages in the serial log? Please follow
the PVOPS Wiki on how to enable all the debug options.
>
>
> On Wed, Oct 6, 2010 at 6:07 PM, Konrad Rzeszutek Wilk <
> konrad.wilk@oracle.com<mailto:konrad.wilk@oracle.com>> wrote:
>
> > On Wed, Oct 06, 2010 at 04:02:51PM -0700, sanjay kushwaha wrote:
> > > Thanks Pasi.
> > >
> > > Hi Konrad,
> > > Could you please let me know how to get these backported drivers as
> > > indicated by Pasi? This is the tree that I have.
> >
> > Just follow the Wiki. Oh, I need to update it.
> >
> > Here do this:
> >
> > git remote add konrad git://
> > git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git<http://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git>
> >
> > git pull konrad
> > git checkout konrad/devel/next.drm
> >
> > make
> >
> > >
> > > [evans@vwifi0 linux-2.6.32.x]$ git show
> > > commit b297cdac0373625d3cd0e6f2b393570dcf2edba6
> > > Merge: c6cfd01 64392f6
> > > Author: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com<mailto:jeremy.fitzhardinge@citrix.com>>
> > > Date: Mon Sep 13 14:27:24 2010 -0700
> > >
> > > Merge branch 'xen/next' into xen/next-2.6.32
> > >
> > > * xen/next:
> > > xen/netfront: Fix another potential race condition
> > > Revert "xen/netfront: default smartpoll to on"
> > >
> > > [evans@vwifi0 linux-2.6.32.x]$
> > >
> > >
> > > Thanks,
> > > Sanjay
> > >
> > > On Wed, Oct 6, 2010 at 1:12 PM, Pasi Kärkkäinen <pasik@iki.fi<mailto:pasik@iki.fi>> wrote:
> > >
> > > > On Wed, Oct 06, 2010 at 10:50:57AM -0700, sanjay kushwaha wrote:
> > > > > Hi,
> > > > > I have run into more problems now. This time with VT-d.
> > > > > When I enable VT-d on this laptop, graphics again stops working in
> > > > dom0
> > > > > with pvops (linux 2.6.32.21). the screen starts showing garbage as
> > > > soon as
> > > > > it switches into graphics mode.this happens when I boot the pvops
> > > > kernel
> > > > > both as dom0 and native linux. However, when I try 2.6.33 based
> > pvops
> > > > > kernel (stable-2.6.33.x) graphics seems to work fine with VT-d
> > when
> > > > > running native but it doesnt work when running as Dom0.
> > > > >
> > > > > so now the problem is:
> > > > >
> > > > > with stable-2.6.32.x: graphics works in Dom0 without Vt-d but not
> > with
> > > > > VT-d (neither native nor Dom0).
> > > > > with stable-2.6.33.x: graphics works with VT-d when running native
> > but
> > > > > doesnt work when running as Dom0 (with or without VT-d).
> > > > >
> > > >
> > > > stable-2.6.33.x is not maintained, and you shouldn't use it.
> > > >
> > > > I think Konrad has a backport of the 2.6.34 drm/dri drivers
> > > > to stable-2.6.32.x somewhere.. that might help.
> > > >
> > > > http://wiki.xensource.com/xenwiki/XenPVOPSDRM
> > > >
> > > > -- Pasi
> > > >
> > > > > I am experiencing this problem both with Lenovo T410, and Dell
> > > > latitude
> > > > > E6410.
> > > > > Has anybody experienced this problem?
> > > > >
> > > > > Thanks,
> > > > > Sanjay
> > > > >
> > > > > On Fri, Oct 1, 2010 at 11:06 AM, sanjay kushwaha
> > > > > <[1]sanjay.kushwaha@gmail.com<mailto:sanjay.kushwaha@gmail.com>> wrote:
> > > > >
> > > > > havent tried stable-2.6.32.x on Radeon. It works with nomodeset
> > and
> > > > > nopat options with stable-2.6.33.x branch.
> > > > >
> > > > > On Fri, Oct 1, 2010 at 10:57 AM, Konrad Rzeszutek Wilk
> > > > > <[2]konrad.wilk@oracle.com<mailto:konrad.wilk@oracle.com>> wrote:
> > > > >
> > > > > On Fri, Oct 01, 2010 at 10:06:48AM -0700, sanjay kushwaha
> > wrote:
> > > > > > When I dont use nomodeset option, dom0 boots fine X runs
> > > > properly.
> > > > > So Fedora
> > > > > > 13 (X86_64) distro with stable-2.6.32.x pvops kernel and
> > > > > xen-unstable works
> > > > > > fine for i915 without nomodeset option.
> > > > >
> > > > > Good to hear it works for you.
> > > > >
> > > > > What about your radeon laptop?
> > > > > >
> > > > > > Thanks,
> > > > > > Sanjay
> > > > > >
> > > > > > On Wed, Sep 29, 2010 at 3:56 PM, sanjay kushwaha
> > > > > > <[3]sanjay.kushwaha@gmail.com<mailto:sanjay.kushwaha@gmail.com>>wrote:
> > > > > >
> > > > > > > Hi Jeremy,
> > > > > > > I switched to stable-2.6.32.x branch (which is 2.6.32.21
> > > > based)
> > > > > but I get
> > > > > > > the same problem. Attached is the Xorg.0.log file when I
> > > > booted
> > > > > with
> > > > > > > nomodeset option.
> > > > > > >
> > > > > > > interestingly I did not see any kernel or driver crash
> > > > messages in
> > > > > the
> > > > > > > dmesg output. I do see these messages multiple times in
> > > > > /var/log/messages
> > > > > > > *
> > > > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> > GdmDisplay:
> > > > > display
> > > > > > > lasted 0.048984 seconds
> > > > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> > > > > GdmLocalDisplayFactory:
> > > > > > > maximum number of X display failures reached: check X
> > server
> > > > log
> > > > > for errors
> > > > > > > *
> > > > > > >
> > > > > > > Thanks,
> > > > > > > Sanjay
> > > > > > >
> > > > > > >
> > > > > > > On Wed, Sep 29, 2010 at 11:57 AM, Jeremy Fitzhardinge
> > > > > <[4]jeremy@goop.org<mailto:jeremy@goop.org>>wrote:
> > > > > > >
> > > > > > >> On 09/29/2010 11:12 AM, sanjay kushwaha wrote:
> > > > > > >> > Hi Folks,
> > > > > > >> > I am trying to boot latest xen-unstable on my laptop
> > which
> > > > has
> > > > > Intel
> > > > > > >> > i915 graphics. PVOPS dom0 is 2.6.33.6 based (from
> > branch
> > > > > > >> > xen/stable-2.6.33.x)
> > > > > > >>
> > > > > > >> Don't use that branch; it isn't supported (in fact, I
> > deleted
> > > > it
> > > > > a while
> > > > > > >> ago). Use xen/stable-2.6.32.x for now.
> > > > > > >>
> > > > > > >> J
> > > > > > >>
> > > > > > >> > and the distro is fedora 13 64-bit. The graphics doesnt
> > > > come up
> > > > > and it
> > > > > > >> > seems that i915 driver is crashing multiple times. If I
> > > > boot in
> > > > > > >> > run-level 3 (without X) dom0 boots fine.
> > > > > > >> > I tried booting the dom0 kernel with nomodeset and
> > nopat
> > > > > options
> > > > > > >> > without any success. I searched on internet and found
> > that
> > > > > multiple
> > > > > > >> > people have reported similar problem but I could not
> > find
> > > > any
> > > > > solution.
> > > > > > >> >
> > > > > > >> > Has anybody found a solution or workaround to this
> > problem?
> > > > > > >> >
> > > > > > >> > Thanks,
> > > > > > >> > Sanjay
> > > > > > >> >
> > > > > > >> > PS: I have another laptop with same version of xen and
> > > > pvops
> > > > > dom0 but
> > > > > > >> > it has ATI radeon graphics card. This laptop boots dom0
> > > > with
> > > > > graphics
> > > > > > >> > when I give nomodeset and nopat options (but fails if I
> > > > dont
> > > > > give
> > > > > > >> > either of those two options).
> > > > > > >> >
> > > > > > >> >
> > > > > > >> >
> > > > > > >> > _______________________________________________
> > > > > > >> > Xen-devel mailing list
> > > > > > >> > [5]Xen-devel@lists.xensource.com<mailto:Xen-devel@lists.xensource.com>
> > > > > > >> > [6]http://lists.xensource.com/xen-devel
> > > > > > >>
> > > > > > >>
> > > > > > >
> > > > >
> > > > > > _______________________________________________
> > > > > > Xen-devel mailing list
> > > > > > [7]Xen-devel@lists.xensource.com<mailto:Xen-devel@lists.xensource.com>
> > > > > > [8]http://lists.xensource.com/xen-devel
> > > > >
> > > > > --
> > > > > ----------------------
> > > > > Dr. Sanjay Kumar
> > > > > Research Scientist
> > > > > Intel Corporation
> > > > >
> > > > > --
> > > > > ----------------------
> > > > > Dr. Sanjay Kumar
> > > > > Research Scientist
> > > > > Intel Corporation
> > > > >
> > > > > References
> > > > >
> > > > > Visible links
> > > > > 1. mailto:sanjay.kushwaha@gmail.com<mailto:sanjay.kushwaha@gmail.com>
> > > > > 2. mailto:konrad.wilk@oracle.com<mailto:konrad.wilk@oracle.com>
> > > > > 3. mailto:sanjay.kushwaha@gmail.com<mailto:sanjay.kushwaha@gmail.com>
> > > > > 4. mailto:jeremy@goop.org<mailto:jeremy@goop.org>
> > > > > 5. mailto:Xen-devel@lists.xensource.com<mailto:Xen-devel@lists.xensource.com>
> > > > > 6. http://lists.xensource.com/xen-devel
> > > > > 7. mailto:Xen-devel@lists.xensource.com<mailto:Xen-devel@lists.xensource.com>
> > > > > 8. http://lists.xensource.com/xen-devel
> > > >
> > > > > _______________________________________________
> > > > > Xen-devel mailing list
> > > > > Xen-devel@lists.xensource.com<mailto:Xen-devel@lists.xensource.com>
> > > > > http://lists.xensource.com/xen-devel
> > > >
> > > >
> > >
> > >
> > > --
> > > ----------------------
> > > Dr. Sanjay Kumar
> > > Research Scientist
> > > Intel Corporation
> >
>
>
>
> --
> ----------------------
> Dr. Sanjay Kumar
> Research Scientist
> Intel Corporation
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com<mailto:Xen-devel@lists.xensource.com>
> http://lists.xensource.com/xen-devel
--
----------------------
Dr. Sanjay Kumar
Research Scientist
Intel Corporation
--
----------------------
Dr. Sanjay Kumar
Research Scientist
Intel Corporation
--
----------------------
Dr. Sanjay Kumar
Research Scientist
Intel Corporation
[-- Attachment #1.2: Type: text/html, Size: 28014 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: pvops Dom0 graphics doesnt work with Intel i915
2010-11-07 6:22 ` Kay, Allen M
@ 2010-11-07 18:57 ` sanjay kushwaha
0 siblings, 0 replies; 19+ messages in thread
From: sanjay kushwaha @ 2010-11-07 18:57 UTC (permalink / raw)
To: Kay, Allen M; +Cc: Jeremy Fitzhardinge, xen-devel, Konrad Rzeszutek Wilk
[-- Attachment #1.1: Type: text/plain, Size: 13355 bytes --]
Thanks Allen,
Looking at this patch, I realized that I dont need the patch. using
intel_iommu=igfx_off on kernel command line gets the same job done in this
kernel.
Thanks,
Sanjay
On Sat, Nov 6, 2010 at 11:22 PM, Kay, Allen M <allen.m.kay@intel.com> wrote:
> Hi Sanjay,
>
>
>
> The fix in Xen was derived from a similar fix in Linux kernel below. It is
> already part of the latest Linux kernel. Since it was checked in August, it
> is not in 2.6.32.21 pvops kernel you are using.
>
>
>
> https://patchwork.kernel.org/patch/132771/
>
>
>
> Allen
>
>
>
> *From:* sanjay kushwaha [mailto:sanjay.kushwaha@gmail.com]
> *Sent:* Saturday, November 06, 2010 10:22 AM
> *To:* Kay, Allen M
> *Cc:* Konrad Rzeszutek Wilk; Jeremy Fitzhardinge; xen-devel
>
> *Subject:* Re: [Xen-devel] pvops Dom0 graphics doesnt work with Intel i915
>
>
>
> Hi Allen,
> So this may not be the correct forum to ask this question but I am
> wondering if a similar workaround has been developed for VT-d in Linux
> kernel for this problem.
> I am trying to boot pvops Linux as Native Linux (2.6.32.21) with VT-d on
> Lenovo T410 and Intel graphics is not working.
>
> Can someone please let me know?
>
> Thanks,
> Sanjay
>
> On Thu, Oct 7, 2010 at 3:44 PM, sanjay kushwaha <sanjay.kushwaha@gmail.com>
> wrote:
>
> Hi Allen,
> Indeed I needed this workaround. Now graphics works fine with VT-d with
> this xen tree.
>
> Thanks,
> Sanjay
>
>
>
> On Thu, Oct 7, 2010 at 3:05 PM, Kay, Allen M <allen.m.kay@intel.com>
> wrote:
>
> Sanjay,
>
>
>
> Have you tried the latest xen-unstable staging tree? It has a workaround
> for T410 VT-d graphics issue caused by Lenovo BIOS. This might be the
> workaround you need:
>
>
>
> http://xenbits.xensource.com/staging/xen-unstable.hg?rev/4beee5779122
>
>
>
> Allen
>
>
>
> *From:* xen-devel-bounces@lists.xensource.com [mailto:
> xen-devel-bounces@lists.xensource.com] *On Behalf Of *sanjay kushwaha
> *Sent:* Thursday, October 07, 2010 12:13 PM
> *To:* Konrad Rzeszutek Wilk
> *Cc:* Jeremy Fitzhardinge; xen-devel
> *Subject:* Re: [Xen-devel] pvops Dom0 graphics doesnt work with Intel i915
>
>
>
> Hi Konrad,
> Unfortunately T410 doesnt have a serial port and neither does the docking
> station. I havent had any success with USB-to-Serial port dongles in the
> past. is there any way to get the serial port output?
>
> Thanks,
> Sanjay
>
> On Thu, Oct 7, 2010 at 11:05 AM, Konrad Rzeszutek Wilk <
> konrad.wilk@oracle.com> wrote:
>
> On Thu, Oct 07, 2010 at 10:36:34AM -0700, sanjay kushwaha wrote:
> > Hi Konrad,
> > I tried your tree. It created a 2.6.32.15 based pvops kernel but graphics
> > with VT-d still doesn't work. when I give iommu=0 on xen kernel command
> line
> > in grub menu, graphics works but with iommu=1 it doesnt work (The whole
> > screen is garbage).
>
> Are there any warnings/debug messages in the serial log? Please follow
> the PVOPS Wiki on how to enable all the debug options.
>
> >
> >
> > On Wed, Oct 6, 2010 at 6:07 PM, Konrad Rzeszutek Wilk <
> > konrad.wilk@oracle.com> wrote:
> >
> > > On Wed, Oct 06, 2010 at 04:02:51PM -0700, sanjay kushwaha wrote:
> > > > Thanks Pasi.
> > > >
> > > > Hi Konrad,
> > > > Could you please let me know how to get these backported drivers as
> > > > indicated by Pasi? This is the tree that I have.
> > >
> > > Just follow the Wiki. Oh, I need to update it.
> > >
> > > Here do this:
> > >
> > > git remote add konrad git://
> > > git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git
> > >
> > > git pull konrad
> > > git checkout konrad/devel/next.drm
> > >
> > > make
> > >
> > > >
> > > > [evans@vwifi0 linux-2.6.32.x]$ git show
> > > > commit b297cdac0373625d3cd0e6f2b393570dcf2edba6
> > > > Merge: c6cfd01 64392f6
> > > > Author: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
> > > > Date: Mon Sep 13 14:27:24 2010 -0700
> > > >
> > > > Merge branch 'xen/next' into xen/next-2.6.32
> > > >
> > > > * xen/next:
> > > > xen/netfront: Fix another potential race condition
> > > > Revert "xen/netfront: default smartpoll to on"
> > > >
> > > > [evans@vwifi0 linux-2.6.32.x]$
> > > >
> > > >
> > > > Thanks,
> > > > Sanjay
> > > >
> > > > On Wed, Oct 6, 2010 at 1:12 PM, Pasi Kärkkäinen <pasik@iki.fi>
> wrote:
> > > >
> > > > > On Wed, Oct 06, 2010 at 10:50:57AM -0700, sanjay kushwaha wrote:
> > > > > > Hi,
> > > > > > I have run into more problems now. This time with VT-d.
> > > > > > When I enable VT-d on this laptop, graphics again stops
> working in
> > > > > dom0
> > > > > > with pvops (linux 2.6.32.21). the screen starts showing
> garbage as
> > > > > soon as
> > > > > > it switches into graphics mode.this happens when I boot the
> pvops
> > > > > kernel
> > > > > > both as dom0 and native linux. However, when I try 2.6.33
> based
> > > pvops
> > > > > > kernel (stable-2.6.33.x) graphics seems to work fine with VT-d
> > > when
> > > > > > running native but it doesnt work when running as Dom0.
> > > > > >
> > > > > > so now the problem is:
> > > > > >
> > > > > > with stable-2.6.32.x: graphics works in Dom0 without Vt-d but
> not
> > > with
> > > > > > VT-d (neither native nor Dom0).
> > > > > > with stable-2.6.33.x: graphics works with VT-d when running
> native
> > > but
> > > > > > doesnt work when running as Dom0 (with or without VT-d).
> > > > > >
> > > > >
> > > > > stable-2.6.33.x is not maintained, and you shouldn't use it.
> > > > >
> > > > > I think Konrad has a backport of the 2.6.34 drm/dri drivers
> > > > > to stable-2.6.32.x somewhere.. that might help.
> > > > >
> > > > > http://wiki.xensource.com/xenwiki/XenPVOPSDRM
> > > > >
> > > > > -- Pasi
> > > > >
> > > > > > I am experiencing this problem both with Lenovo T410, and Dell
> > > > > latitude
> > > > > > E6410.
> > > > > > Has anybody experienced this problem?
> > > > > >
> > > > > > Thanks,
> > > > > > Sanjay
> > > > > >
> > > > > > On Fri, Oct 1, 2010 at 11:06 AM, sanjay kushwaha
> > > > > > <[1]sanjay.kushwaha@gmail.com> wrote:
> > > > > >
> > > > > > havent tried stable-2.6.32.x on Radeon. It works with
> nomodeset
> > > and
> > > > > > nopat options with stable-2.6.33.x branch.
> > > > > >
> > > > > > On Fri, Oct 1, 2010 at 10:57 AM, Konrad Rzeszutek Wilk
> > > > > > <[2]konrad.wilk@oracle.com> wrote:
> > > > > >
> > > > > > On Fri, Oct 01, 2010 at 10:06:48AM -0700, sanjay kushwaha
> > > wrote:
> > > > > > > When I dont use nomodeset option, dom0 boots fine X runs
> > > > > properly.
> > > > > > So Fedora
> > > > > > > 13 (X86_64) distro with stable-2.6.32.x pvops kernel and
> > > > > > xen-unstable works
> > > > > > > fine for i915 without nomodeset option.
> > > > > >
> > > > > > Good to hear it works for you.
> > > > > >
> > > > > > What about your radeon laptop?
> > > > > > >
> > > > > > > Thanks,
> > > > > > > Sanjay
> > > > > > >
> > > > > > > On Wed, Sep 29, 2010 at 3:56 PM, sanjay kushwaha
> > > > > > > <[3]sanjay.kushwaha@gmail.com>wrote:
> > > > > > >
> > > > > > > > Hi Jeremy,
> > > > > > > > I switched to stable-2.6.32.x branch (which is
> 2.6.32.21
> > > > > based)
> > > > > > but I get
> > > > > > > > the same problem. Attached is the Xorg.0.log file when
> I
> > > > > booted
> > > > > > with
> > > > > > > > nomodeset option.
> > > > > > > >
> > > > > > > > interestingly I did not see any kernel or driver crash
> > > > > messages in
> > > > > > the
> > > > > > > > dmesg output. I do see these messages multiple times
> in
> > > > > > /var/log/messages
> > > > > > > > *
> > > > > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> > > GdmDisplay:
> > > > > > display
> > > > > > > > lasted 0.048984 seconds
> > > > > > > > Sep 29 15:40:32 vwifi0 gdm-binary[2244]: WARNING:
> > > > > > GdmLocalDisplayFactory:
> > > > > > > > maximum number of X display failures reached: check X
> > > server
> > > > > log
> > > > > > for errors
> > > > > > > > *
> > > > > > > >
> > > > > > > > Thanks,
> > > > > > > > Sanjay
> > > > > > > >
> > > > > > > >
> > > > > > > > On Wed, Sep 29, 2010 at 11:57 AM, Jeremy Fitzhardinge
> > > > > > <[4]jeremy@goop.org>wrote:
> > > > > > > >
> > > > > > > >> On 09/29/2010 11:12 AM, sanjay kushwaha wrote:
> > > > > > > >> > Hi Folks,
> > > > > > > >> > I am trying to boot latest xen-unstable on my
> laptop
> > > which
> > > > > has
> > > > > > Intel
> > > > > > > >> > i915 graphics. PVOPS dom0 is 2.6.33.6 based (from
> > > branch
> > > > > > > >> > xen/stable-2.6.33.x)
> > > > > > > >>
> > > > > > > >> Don't use that branch; it isn't supported (in fact, I
> > > deleted
> > > > > it
> > > > > > a while
> > > > > > > >> ago). Use xen/stable-2.6.32.x for now.
> > > > > > > >>
> > > > > > > >> J
> > > > > > > >>
> > > > > > > >> > and the distro is fedora 13 64-bit. The graphics
> doesnt
> > > > > come up
> > > > > > and it
> > > > > > > >> > seems that i915 driver is crashing multiple times.
> If I
> > > > > boot in
> > > > > > > >> > run-level 3 (without X) dom0 boots fine.
> > > > > > > >> > I tried booting the dom0 kernel with nomodeset and
> > > nopat
> > > > > > options
> > > > > > > >> > without any success. I searched on internet and
> found
> > > that
> > > > > > multiple
> > > > > > > >> > people have reported similar problem but I could
> not
> > > find
> > > > > any
> > > > > > solution.
> > > > > > > >> >
> > > > > > > >> > Has anybody found a solution or workaround to this
> > > problem?
> > > > > > > >> >
> > > > > > > >> > Thanks,
> > > > > > > >> > Sanjay
> > > > > > > >> >
> > > > > > > >> > PS: I have another laptop with same version of xen
> and
> > > > > pvops
> > > > > > dom0 but
> > > > > > > >> > it has ATI radeon graphics card. This laptop boots
> dom0
> > > > > with
> > > > > > graphics
> > > > > > > >> > when I give nomodeset and nopat options (but fails
> if I
> > > > > dont
> > > > > > give
> > > > > > > >> > either of those two options).
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> > _______________________________________________
> > > > > > > >> > Xen-devel mailing list
> > > > > > > >> > [5]Xen-devel@lists.xensource.com
> > > > > > > >> > [6]http://lists.xensource.com/xen-devel
> > > > > > > >>
> > > > > > > >>
> > > > > > > >
> > > > > >
> > > > > > > _______________________________________________
> > > > > > > Xen-devel mailing list
> > > > > > > [7]Xen-devel@lists.xensource.com
> > > > > > > [8]http://lists.xensource.com/xen-devel
> > > > > >
> > > > > > --
> > > > > > ----------------------
> > > > > > Dr. Sanjay Kumar
> > > > > > Research Scientist
> > > > > > Intel Corporation
> > > > > >
> > > > > > --
> > > > > > ----------------------
> > > > > > Dr. Sanjay Kumar
> > > > > > Research Scientist
> > > > > > Intel Corporation
> > > > > >
> > > > > > References
> > > > > >
> > > > > > Visible links
> > > > > > 1. mailto:sanjay.kushwaha@gmail.com
> > > > > > 2. mailto:konrad.wilk@oracle.com
> > > > > > 3. mailto:sanjay.kushwaha@gmail.com
> > > > > > 4. mailto:jeremy@goop.org
> > > > > > 5. mailto:Xen-devel@lists.xensource.com
> > > > > > 6. http://lists.xensource.com/xen-devel
> > > > > > 7. mailto:Xen-devel@lists.xensource.com
> > > > > > 8. http://lists.xensource.com/xen-devel
> > > > >
> > > > > > _______________________________________________
> > > > > > Xen-devel mailing list
> > > > > > Xen-devel@lists.xensource.com
> > > > > > http://lists.xensource.com/xen-devel
> > > > >
> > > > >
> > > >
> > > >
> > > > --
> > > > ----------------------
> > > > Dr. Sanjay Kumar
> > > > Research Scientist
> > > > Intel Corporation
> > >
> >
> >
> >
> > --
> > ----------------------
> > Dr. Sanjay Kumar
> > Research Scientist
> > Intel Corporation
>
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xensource.com
> > http://lists.xensource.com/xen-devel
>
>
>
>
> --
> ----------------------
> Dr. Sanjay Kumar
> Research Scientist
> Intel Corporation
>
>
>
> --
>
> ----------------------
> Dr. Sanjay Kumar
> Research Scientist
> Intel Corporation
>
>
>
>
> --
> ----------------------
> Dr. Sanjay Kumar
> Research Scientist
> Intel Corporation
>
--
----------------------
Dr. Sanjay Kumar
Research Scientist
Intel Corporation
[-- Attachment #1.2: Type: text/html, Size: 23416 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2010-11-07 18:57 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-09-29 18:12 pvops Dom0 graphics doesnt work with Intel i915 sanjay kushwaha
2010-09-29 18:57 ` Jeremy Fitzhardinge
2010-09-29 22:56 ` sanjay kushwaha
2010-10-01 17:06 ` sanjay kushwaha
2010-10-01 17:57 ` Konrad Rzeszutek Wilk
2010-10-01 18:06 ` sanjay kushwaha
2010-10-06 17:50 ` sanjay kushwaha
2010-10-06 20:12 ` Pasi Kärkkäinen
2010-10-06 23:02 ` sanjay kushwaha
2010-10-07 1:07 ` Konrad Rzeszutek Wilk
2010-10-07 17:36 ` sanjay kushwaha
2010-10-07 18:05 ` Konrad Rzeszutek Wilk
2010-10-07 19:12 ` sanjay kushwaha
2010-10-07 19:33 ` Pasi Kärkkäinen
2010-10-07 22:05 ` Kay, Allen M
2010-10-07 22:44 ` sanjay kushwaha
2010-11-06 17:21 ` sanjay kushwaha
2010-11-07 6:22 ` Kay, Allen M
2010-11-07 18:57 ` sanjay kushwaha
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).