* Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot [not found] <AANLkTim33Hbar2x0ey8R3hyQ97esu_C6ll7GuYQIb8i_@mail.gmail.com> @ 2010-07-02 15:19 ` ktckd 2010-07-06 14:15 ` Konrad Rzeszutek Wilk 0 siblings, 1 reply; 8+ messages in thread From: ktckd @ 2010-07-02 15:19 UTC (permalink / raw) To: xen-devel [-- Attachment #1.1: Type: text/plain, Size: 986 bytes --] ---------- Forwarded message ---------- From: ktckd <ktckd9@gmail.com> Date: Wed, Jun 30, 2010 at 4:49 PM Subject: Re: Xen4.0/FC8/Linux-2.6.31.13 hang on boot To: xen-users@lists.xensource.com Rebuilt Xen4.0 with linux-2.6.18 and have seen no problems during boot. So is it the linux kernel that caused the problem? Then why don't I see any problem when I try the 4th grub entry? ---------- Forwarded message ---------- From: ktckd <ktckd9@gmail.com> Date: Mon, Jun 28, 2010 at 1:23 PM Subject: Xen4.0/FC8/Linux-2.6.31.13 hang on boot To: xen-users@lists.xensource.com Hi list, I am seeing an issue on my notebook with Xen4.0/FC8/Linux-2.6.31.13. The unit has nVidia graphics and basically hangs at the point shown in the image. Not sure where I might be going wrong. Would appreciate if anyone can point me in some direction. The unit has no problem booting into 3rd (acpi=off) and 4th boot entry. I remember xen3.4.0 worked fine the last time I tried it on this unit. Regards [-- Attachment #1.2: Type: text/html, Size: 1412 bytes --] [-- Attachment #2: Xen4.0 Serial.TXT --] [-- Type: text/plain, Size: 10348 bytes --] \0^[[0m^[[37m^[[40m^[[2J^[[01;01H^[[=3h^[[2J^[[01;01H^[[2J^[[01;01H^[[=3h^[[2J^[[01;01H __ __ _ _ ___ ___ \ \/ /___ _ __ | || | / _ \ / _ \ \ // _ \ '_ \ | || |_| | | | | | | / \ __/ | | | |__ _| |_| | |_| | /_/\_\___|_| |_| |_|(_)___(_)___/ (XEN) Xen version 4.0.0 (root@localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) Fri Jun 25 15:26:18 CDT 2010 (XEN) Latest ChangeSet: unavailable (XEN) Command line: dom0_mem=512M iommu=required loglvl=all guest_loglvl=all com1=115200,8n1 console=com1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000ef000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000bbdd4000 (usable) (XEN) 00000000bbdd4000 - 00000000bbec2000 (reserved) (XEN) 00000000bbec2000 - 00000000bbfc2000 (ACPI NVS) (XEN) 00000000bbfc2000 - 00000000bbfff000 (ACPI data) (XEN) 00000000bbfff000 - 00000000bc000000 (usable) (XEN) 00000000bc000000 - 00000000c0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 00000000fec01000 (reserved) (XEN) 00000000fed10000 - 00000000fed14000 (reserved) (XEN) 00000000fed19000 - 00000000fed1a000 (reserved) (XEN) 00000000fed1b000 - 00000000fed20000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffd00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 00000001c0000000 (usable) (XEN) ACPI: RSDP 000F2AE0, 0024 (r2 HPQOEM) (XEN) ACPI: XSDT BBFFE120, 0094 (r1 HPQOEM SLIC-MPC F 1000013) (XEN) ACPI: FACP BBFFC000, 00F4 (r3 HPQOEM 1520 F HP 1) (XEN) ACPI: DSDT BBFDB000, 1BCEC (r2 HPQOEM 1520 1 INTL 20060912) (XEN) ACPI: FACS BBF41000, 0040 (XEN) ACPI: HPET BBFFB000, 0038 (r1 HPQOEM 1520 1 HP 1) (XEN) ACPI: APIC BBFFA000, 00BC (r1 HPQOEM 1520 1 HP 1) (XEN) ACPI: MCFG BBFF9000, 003C (r1 HPQOEM 1520 1 HP 1) (XEN) ACPI: TCPA BBFF7000, 0032 (r2 HPQOEM 1520 0 HP 1) (XEN) ACPI: SSDT BBFD8000, 0135 (r1 HPQOEM SataAhci 1000 INTL 20060912) (XEN) ACPI: SSDT BBFD7000, 0314 (r1 HPQOEM PtidDevc 1000 INTL 20060912) (XEN) ACPI: SLIC BBFD6000, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) (XEN) ACPI: SSDT BBFD2000, 2566 (r1 HPQOEM NVIDIAGF 1 INTL 20060912) (XEN) ACPI: DMAR BBFD1000, 0068 (r1 INTEL CP_FIELD 1 INTL 1) (XEN) ACPI: SSDT BBFD0000, 0A10 (r1 PmRef CpuPm 3000 INTL 20060912) (XEN) ACPI: SSDT BBFCF000, 0288 (r1 PmRef Cpu0Tst 3000 INTL 20060912) (XEN) ACPI: SSDT BBFCE000, 0225 (r1 PmRef ApTst 3000 INTL 20060912) (XEN) ACPI: ASF! BBFF8000, 00A0 (r32 HPQOEM 1520 1 HP 1) (XEN) System RAM: 6050MB (6196088kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-00000001c0000000 (XEN) Domain heap initialised (XEN) DMI 2.6 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x408 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0] (XEN) ACPI: wakeup_vec[bbf4100c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) (XEN) Processor #1 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) (XEN) Processor #2 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) (XEN) Processor #3 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) (XEN) Processor #4 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) (XEN) Processor #5 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) (XEN) Processor #6 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) (XEN) Processor #7 7:14 APIC version 21 (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000 (XEN) [VT-D]dmar.c:504: RMRR address range not in reserved memory base = 0 end = fff; iommu_inclusive_mapping=1 parameter may be needed. (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 1729.048 MHz processor. (XEN) Initing memory sharing. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs enabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging detected. (XEN) Intel machine check reporting enabled (XEN) Intel VT-d Snoop Control supported. (XEN) Intel VT-d DMA Passthrough not supported. (XEN) Intel VT-d Queued Invalidation supported. (XEN) Intel VT-d Interrupt Remapping not supported. (XEN) I/O virtualisation enabled (XEN) I/O virtualisation for PV guests disabled (XEN) Total of 8 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) TSC is reliable, synchronization unnecessary (XEN) Platform timer is 14.318MHz HPET ÿ(XEN) Allocated console ring of 64 KiB. (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) microcode.c:73:d32767 microcode: CPU2 resumed (XEN) microcode.c:73:d32767 microcode: CPU3 resumed (XEN) microcode.c:73:d32767 microcode: CPU4 resumed (XEN) microcode.c:73:d32767 microcode: CPU5 resumed (XEN) microcode.c:73:d32767 microcode: CPU6 resumed (XEN) Brought up 8 CPUs (XEN) microcode.c:73:d32767 microcode: CPU7 resumed (XEN) Turbo Mode detected! (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1884000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 00000001b4000000->00000001b8000000 (114688 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81884000 (XEN) Init. ramdisk: ffffffff81884000->ffffffff82051400 (XEN) Phys-Mach map: ffffffff82052000->ffffffff82152000 (XEN) Start info: ffffffff82152000->ffffffff821524b4 (XEN) Page tables: ffffffff82153000->ffffffff82168000 (XEN) Boot stack: ffffffff82168000->ffffffff82169000 (XEN) TOTAL: ffffffff80000000->ffffffff82400000 (XEN) ENTRY ADDRESS: ffffffff81666de0 (XEN) Dom0 has maximum 8 VCPUs (XEN) Scrubbing Free RAM: .......................................................done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 156kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... (XEN) io_apic.c:2290: (XEN) ioapic_guest_write: apic=0, pin=2, irq=0 (XEN) ioapic_guest_write: new_entry=000109f0 (XEN) ioapic_guest_write: old_entry=000009f0 pirq=0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) irq.c:1445: dom0: pirq 0 or irq 3 already mapped (XEN) io_apic.c:2290: (XEN) ioapic_guest_write: apic=0, pin=4, irq=4 (XEN) ioapic_guest_write: new_entry=000109f1 (XEN) ioapic_guest_write: old_entry=000009f1 pirq=0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) irq.c:1445: dom0: pirq 0 or irq 5 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 6 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 7 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 8 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 9 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 10 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 11 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 12 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 13 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 14 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 15 already mapped (XEN) allocated vector 21 for irq 16 (XEN) irq.c:1445: dom0: pirq 0 or irq 16 already mapped (XEN) allocated vector 29 for irq 20 (XEN) irq.c:1445: dom0: pirq 0 or irq 20 already mapped (XEN) allocated vector 31 for irq 21 (XEN) irq.c:1445: dom0: pirq 0 or irq 21 already mapped (XEN) allocated vector 39 for irq 22 (XEN) irq.c:1445: dom0: pirq 0 or irq 22 already mapped (XEN) allocated vector 41 for irq 23 (XEN) irq.c:1445: dom0: pirq 0 or irq 23 already mapped (XEN) io_apic.c:2290: (XEN) ioapic_guest_write: apic=0, pin=0, irq=0 (XEN) ioapic_guest_write: new_entry=000009f0 (XEN) ioapic_guest_write: old_entry=00010260 pirq=0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! [-- Attachment #3: photo.jpg --] [-- Type: image/jpeg, Size: 213480 bytes --] [-- Attachment #4: linux.config --] [-- Type: application/octet-stream, Size: 85164 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.31.13 # Fri Jun 25 14:32:52 2010 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y CONFIG_X86_TRAMPOLINE=y CONFIG_X86_VSYSCALL=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="-xen" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_TREE=y # # RCU Subsystem # # CONFIG_CLASSIC_RCU is not set CONFIG_TREE_RCU=y # CONFIG_PREEMPT_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=64 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y # CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_IPC_NS is not set CONFIG_USER_NS=y # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_COUNTERS=y # # Performance Counters # CONFIG_PERF_COUNTERS=y CONFIG_EVENT_PROFILE=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y CONFIG_MARKERS=y CONFIG_OPROFILE=m # CONFIG_OPROFILE_IBS is not set CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_KRETPROBES=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PREEMPT_NOTIFIERS=y CONFIG_FREEZER=y # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y # CONFIG_SPARSE_IRQ is not set CONFIG_X86_MPPARSE=y CONFIG_X86_EXTENDED_PLATFORM=y # CONFIG_X86_VSMP is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_PARAVIRT_GUEST=y CONFIG_XEN=y CONFIG_XEN_TIME_VSYSCALL=y CONFIG_XEN_MAX_DOMAIN_MEMORY=32 CONFIG_XEN_SAVE_RESTORE=y # CONFIG_XEN_DEBUG_FS is not set CONFIG_XEN_DOM0=y CONFIG_XEN_PRIVILEGED_GUEST=y CONFIG_XEN_DOM0_PCI=y CONFIG_XEN_PCI_PASSTHROUGH=y CONFIG_MICROCODE_XEN=y # CONFIG_KVM_CLOCK is not set # CONFIG_KVM_GUEST is not set CONFIG_PARAVIRT=y # CONFIG_PARAVIRT_SPINLOCKS is not set CONFIG_PARAVIRT_CLOCK=y CONFIG_PARAVIRT_CLOCK_VSYSCALL=y # CONFIG_PARAVIRT_DEBUG is not set # CONFIG_MEMTEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set CONFIG_GENERIC_CPU=y CONFIG_X86_CPU=y CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y # CONFIG_X86_DS is not set CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_GART_IOMMU=y CONFIG_CALGARY_IOMMU=y CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y # CONFIG_AMD_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y # CONFIG_IOMMU_API is not set # CONFIG_MAXSMP is not set CONFIG_NR_CPUS=64 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=y CONFIG_X86_NEW_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y CONFIG_X86_MCE_THRESHOLD=y # CONFIG_X86_MCE_INJECT is not set CONFIG_X86_THERMAL_VECTOR=y # CONFIG_I8K is not set CONFIG_MICROCODE=m CONFIG_MICROCODE_INTEL=y # CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y # CONFIG_X86_CPU_DEBUG is not set CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y CONFIG_NUMA=y CONFIG_K8_NUMA=y CONFIG_X86_64_ACPI_NUMA=y CONFIG_NODES_SPAN_OTHER_NODES=y # CONFIG_NUMA_EMU is not set CONFIG_NODES_SHIFT=6 CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y # # Memory hotplug is currently incompatible with Software Suspend # CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_MMU_NOTIFIER=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW_64K=y CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 # CONFIG_X86_PAT is not set # CONFIG_EFI is not set CONFIG_SECCOMP=y CONFIG_CC_STACKPROTECTOR_ALL=y CONFIG_CC_STACKPROTECTOR=y # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y # CONFIG_KEXEC_JUMP is not set CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y CONFIG_COMPAT_VDSO=y # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y # # Power management and ACPI options # CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_PM=y CONFIG_PM_DEBUG=y # CONFIG_PM_VERBOSE is not set CONFIG_CAN_PM_TRACE=y # CONFIG_PM_TRACE_RTC is not set CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION_NVS=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y CONFIG_ACPI_PROCFS_POWER=y CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=y CONFIG_ACPI_DOCK=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_NUMA=y # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set # CONFIG_ACPI_PCI_SLOT is not set CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y CONFIG_ACPI_SBS=m # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=m CONFIG_CPU_FREQ_STAT_DETAILS=y # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m # # CPUFreq processor drivers # CONFIG_X86_ACPI_CPUFREQ=m CONFIG_X86_POWERNOW_K8=y # CONFIG_X86_SPEEDSTEP_CENTRINO is not set # CONFIG_X86_P4_CLOCKMOD is not set # # shared options # # CONFIG_X86_SPEEDSTEP_LIB is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y # # Memory power savings # # CONFIG_I7300_IDLE is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_XEN=y CONFIG_PCI_DOMAINS=y # CONFIG_DMAR is not set # CONFIG_INTR_REMAP is not set CONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=m CONFIG_PCIEAER=y # CONFIG_PCIE_ECRC is not set # CONFIG_PCIEAER_INJECT is not set # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set CONFIG_XEN_PCIDEV_FRONTEND=y CONFIG_HT_IRQ=y # CONFIG_PCI_IOV is not set CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y CONFIG_PCMCIA_LOAD_CIS=y CONFIG_PCMCIA_IOCTL=y CONFIG_CARDBUS=y # # PC-card bridges # CONFIG_YENTA=y CONFIG_YENTA_O2=y CONFIG_YENTA_RICOH=y CONFIG_YENTA_TI=y CONFIG_YENTA_ENE_TUNE=y CONFIG_YENTA_TOSHIBA=y CONFIG_PD6729=m CONFIG_I82092=m CONFIG_PCCARD_NONSTATIC=y CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_FAKE=m CONFIG_HOTPLUG_PCI_ACPI=m CONFIG_HOTPLUG_PCI_ACPI_IBM=m # CONFIG_HOTPLUG_PCI_CPCI is not set CONFIG_HOTPLUG_PCI_SHPC=m # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y CONFIG_IA32_EMULATION=y # CONFIG_IA32_AOUT is not set CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y CONFIG_XFRM_SUB_POLICY=y CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_LRO=y CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=m CONFIG_TCP_CONG_CUBIC=y CONFIG_TCP_CONG_WESTWOOD=m CONFIG_TCP_CONG_HTCP=m CONFIG_TCP_CONG_HSTCP=m CONFIG_TCP_CONG_HYBLA=m CONFIG_TCP_CONG_VEGAS=m CONFIG_TCP_CONG_SCALABLE=m CONFIG_TCP_CONG_LP=m CONFIG_TCP_CONG_VENO=m CONFIG_TCP_CONG_YEAH=m CONFIG_TCP_CONG_ILLINOIS=m # CONFIG_DEFAULT_BIC is not set CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_HTCP is not set # CONFIG_DEFAULT_VEGAS is not set # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y CONFIG_IPV6_OPTIMISTIC_DAD=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_SIT=m CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y # CONFIG_IPV6_MROUTE is not set CONFIG_NETLABEL=y CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y CONFIG_BRIDGE_NETFILTER=y # # Core Netfilter Configuration # CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CT_ACCT=y CONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CT_PROTO_DCCP=m CONFIG_NF_CT_PROTO_GRE=m CONFIG_NF_CT_PROTO_SCTP=m CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m # CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_HL=m # CONFIG_NETFILTER_XT_TARGET_LED is not set # CONFIG_NETFILTER_XT_TARGET_IMQ is not set CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set # CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_HL=m # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m # CONFIG_NETFILTER_XT_MATCH_OWNER is not set CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set CONFIG_NETFILTER_XT_MATCH_REALM=m # CONFIG_NETFILTER_XT_MATCH_RECENT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_NETFILTER_XT_MATCH_TIME is not set CONFIG_NETFILTER_XT_MATCH_U32=m # CONFIG_NETFILTER_XT_MATCH_OSF is not set CONFIG_IP_VS=m # CONFIG_IP_VS_IPV6 is not set # CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12 # # IPVS transport protocol load balancing support # CONFIG_IP_VS_PROTO_TCP=y CONFIG_IP_VS_PROTO_UDP=y CONFIG_IP_VS_PROTO_AH_ESP=y CONFIG_IP_VS_PROTO_ESP=y CONFIG_IP_VS_PROTO_AH=y # # IPVS scheduler # CONFIG_IP_VS_RR=m CONFIG_IP_VS_WRR=m CONFIG_IP_VS_LC=m CONFIG_IP_VS_WLC=m CONFIG_IP_VS_LBLC=m CONFIG_IP_VS_LBLCR=m CONFIG_IP_VS_DH=m CONFIG_IP_VS_SH=m CONFIG_IP_VS_SED=m CONFIG_IP_VS_NQ=m # # IPVS application helper # CONFIG_IP_VS_FTP=m # # IP: Netfilter Configuration # CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m # CONFIG_NF_CONNTRACK_PROC_COMPAT is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_DCCP=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_UDPLITE=m CONFIG_NF_NAT_PROTO_SCTP=m CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m CONFIG_NF_NAT_TFTP=m CONFIG_NF_NAT_AMANDA=m CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m # CONFIG_IP_NF_SECURITY is not set CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # # IPv6: Netfilter Configuration # CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m # CONFIG_IP6_NF_SECURITY is not set # # DECnet: Netfilter Configuration # # CONFIG_DECNET_NF_GRABULATOR is not set CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m CONFIG_BRIDGE_EBT_T_NAT=m CONFIG_BRIDGE_EBT_802_3=m CONFIG_BRIDGE_EBT_AMONG=m CONFIG_BRIDGE_EBT_ARP=m CONFIG_BRIDGE_EBT_IP=m # CONFIG_BRIDGE_EBT_IP6 is not set CONFIG_BRIDGE_EBT_LIMIT=m CONFIG_BRIDGE_EBT_MARK=m CONFIG_BRIDGE_EBT_PKTTYPE=m CONFIG_BRIDGE_EBT_STP=m CONFIG_BRIDGE_EBT_VLAN=m CONFIG_BRIDGE_EBT_ARPREPLY=m CONFIG_BRIDGE_EBT_DNAT=m CONFIG_BRIDGE_EBT_MARK_T=m CONFIG_BRIDGE_EBT_REDIRECT=m CONFIG_BRIDGE_EBT_SNAT=m CONFIG_BRIDGE_EBT_LOG=m CONFIG_BRIDGE_EBT_ULOG=m # CONFIG_BRIDGE_EBT_NFLOG is not set CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m # # DCCP CCIDs Configuration (EXPERIMENTAL) # # CONFIG_IP_DCCP_CCID2_DEBUG is not set CONFIG_IP_DCCP_CCID3=y # CONFIG_IP_DCCP_CCID3_DEBUG is not set CONFIG_IP_DCCP_CCID3_RTO=100 CONFIG_IP_DCCP_TFRC_LIB=y # # DCCP Kernel Hacking # # CONFIG_IP_DCCP_DEBUG is not set CONFIG_NET_DCCPPROBE=m CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y # CONFIG_RDS is not set CONFIG_TIPC=m # CONFIG_TIPC_ADVANCED is not set # CONFIG_TIPC_DEBUG is not set CONFIG_ATM=m CONFIG_ATM_CLIP=m # CONFIG_ATM_CLIP_NO_ICMP is not set CONFIG_ATM_LANE=m # CONFIG_ATM_MPOA is not set CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_STP=m CONFIG_BRIDGE=m # CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m # CONFIG_VLAN_8021Q_GVRP is not set CONFIG_DECNET=m CONFIG_DECNET_ROUTER=y CONFIG_LLC=y # CONFIG_LLC2 is not set CONFIG_IPX=m # CONFIG_IPX_INTERN is not set CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set CONFIG_WAN_ROUTER=m # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # # Queueing/Scheduling # CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m # CONFIG_NET_SCH_MULTIQ is not set CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m # CONFIG_NET_SCH_DRR is not set CONFIG_NET_SCH_INGRESS=m # # Classification # CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m CONFIG_NET_CLS_ROUTE4=m CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m CONFIG_CLS_U32_PERF=y CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_CLS_FLOW is not set CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_STACK=32 CONFIG_NET_EMATCH_CMP=m CONFIG_NET_EMATCH_NBYTE=m CONFIG_NET_EMATCH_U32=m CONFIG_NET_EMATCH_META=m CONFIG_NET_EMATCH_TEXT=m CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=y CONFIG_NET_ACT_GACT=m CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=m CONFIG_NET_ACT_IPT=m # CONFIG_NET_ACT_NAT is not set CONFIG_NET_ACT_PEDIT=m CONFIG_NET_ACT_SIMP=m # CONFIG_NET_ACT_SKBEDIT is not set CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y # CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set # CONFIG_NET_DROP_MONITOR is not set CONFIG_HAMRADIO=y # # Packet Radio protocols # CONFIG_AX25=m CONFIG_AX25_DAMA_SLAVE=y CONFIG_NETROM=m CONFIG_ROSE=m # # AX.25 network device drivers # CONFIG_MKISS=m CONFIG_6PACK=m CONFIG_BPQETHER=m CONFIG_BAYCOM_SER_FDX=m CONFIG_BAYCOM_SER_HDX=m CONFIG_BAYCOM_PAR=m CONFIG_YAM=m # CONFIG_CAN is not set CONFIG_IRDA=m # # IrDA protocols # CONFIG_IRLAN=m CONFIG_IRNET=m CONFIG_IRCOMM=m # CONFIG_IRDA_ULTRA is not set # # IrDA options # CONFIG_IRDA_CACHE_LAST_LSAP=y CONFIG_IRDA_FAST_RR=y # CONFIG_IRDA_DEBUG is not set # # Infrared-port device drivers # # # SIR device drivers # CONFIG_IRTTY_SIR=m # # Dongle support # CONFIG_DONGLE=y CONFIG_ESI_DONGLE=m CONFIG_ACTISYS_DONGLE=m CONFIG_TEKRAM_DONGLE=m CONFIG_TOIM3232_DONGLE=m CONFIG_LITELINK_DONGLE=m CONFIG_MA600_DONGLE=m CONFIG_GIRBIL_DONGLE=m CONFIG_MCP2120_DONGLE=m CONFIG_OLD_BELKIN_DONGLE=m CONFIG_ACT200L_DONGLE=m CONFIG_KINGSUN_DONGLE=m # CONFIG_KSDAZZLE_DONGLE is not set # CONFIG_KS959_DONGLE is not set # # FIR device drivers # CONFIG_USB_IRDA=m CONFIG_SIGMATEL_FIR=m CONFIG_NSC_FIR=m CONFIG_WINBOND_FIR=m CONFIG_SMC_IRCC_FIR=m CONFIG_ALI_FIR=m CONFIG_VLSI_FIR=m CONFIG_VIA_FIR=m CONFIG_MCS_FIR=m CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_HIDP=m # # Bluetooth device drivers # # CONFIG_BT_HCIBTUSB is not set # CONFIG_BT_HCIBTSDIO is not set CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y # CONFIG_BT_HCIUART_LL is not set CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIDTL1=m CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y CONFIG_CFG80211=m # CONFIG_CFG80211_REG_DEBUG is not set # CONFIG_CFG80211_DEBUGFS is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=m CONFIG_LIB80211_CRYPT_WEP=m CONFIG_LIB80211_CRYPT_CCMP=m CONFIG_LIB80211_CRYPT_TKIP=m # CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=m CONFIG_MAC80211_DEFAULT_PS=y CONFIG_MAC80211_DEFAULT_PS_VALUE=1 # # Rate control algorithm selection # CONFIG_MAC80211_RC_MINSTREL=y # CONFIG_MAC80211_RC_DEFAULT_PID is not set CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y CONFIG_MAC80211_RC_DEFAULT="minstrel" CONFIG_MAC80211_LEDS=y # CONFIG_MAC80211_DEBUGFS is not set # CONFIG_MAC80211_DEBUG_MENU is not set # CONFIG_WIMAX is not set CONFIG_RFKILL=m CONFIG_RFKILL_LEDS=y CONFIG_RFKILL_INPUT=y CONFIG_NET_9P=m # CONFIG_NET_9P_RDMA is not set # CONFIG_NET_9P_DEBUG is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set CONFIG_DEBUG_DEVRES=y CONFIG_SYS_HYPERVISOR=y CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=m CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_TESTS is not set CONFIG_MTD_REDBOOT_PARTS=m CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set # CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=m CONFIG_MTD_BLKDEVS=m CONFIG_MTD_BLOCK=m CONFIG_MTD_BLOCK_RO=m CONFIG_FTL=m CONFIG_NFTL=m CONFIG_NFTL_RW=y CONFIG_INFTL=m CONFIG_RFD_FTL=m CONFIG_SSFDC=m # CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers # CONFIG_MTD_CFI=m CONFIG_MTD_JEDECPROBE=m CONFIG_MTD_GEN_PROBE=m # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set CONFIG_MTD_CFI_INTELEXT=m CONFIG_MTD_CFI_AMDSTD=m CONFIG_MTD_CFI_STAA=m CONFIG_MTD_CFI_UTIL=m CONFIG_MTD_RAM=m CONFIG_MTD_ROM=m CONFIG_MTD_ABSENT=m # # Mapping drivers for chip access # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_SC520CDP=m CONFIG_MTD_NETSC520=m CONFIG_MTD_TS5500=m # CONFIG_MTD_SBC_GXX is not set # CONFIG_MTD_AMD76XROM is not set # CONFIG_MTD_ICHXROM is not set CONFIG_MTD_ESB2ROM=m CONFIG_MTD_CK804XROM=m CONFIG_MTD_SCB2_FLASH=m # CONFIG_MTD_NETtel is not set # CONFIG_MTD_L440GX is not set CONFIG_MTD_PCI=m # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # CONFIG_MTD_PMC551=m # CONFIG_MTD_PMC551_BUGFIX is not set # CONFIG_MTD_PMC551_DEBUG is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set CONFIG_MTD_MTDRAM=m CONFIG_MTDRAM_TOTAL_SIZE=4096 CONFIG_MTDRAM_ERASE_SIZE=128 CONFIG_MTD_BLOCK2MTD=m # # Disk-On-Chip Device Drivers # # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set CONFIG_MTD_NAND=m # CONFIG_MTD_NAND_VERIFY_WRITE is not set CONFIG_MTD_NAND_ECC_SMC=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=m CONFIG_MTD_NAND_DISKONCHIP=m # CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 # CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set # CONFIG_MTD_NAND_CAFE is not set CONFIG_MTD_NAND_NANDSIM=m # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set # # UBI - Unsorted block images # CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_RESERVE=1 # CONFIG_MTD_UBI_GLUEBI is not set # # UBI debugging options # # CONFIG_MTD_UBI_DEBUG is not set CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_SERIAL=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set CONFIG_PARPORT_PC_PCMCIA=m # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y CONFIG_PARPORT_NOT_PC=y CONFIG_PNP=y CONFIG_PNP_DEBUG_MESSAGES=y # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=m CONFIG_PARIDE=m # # Parallel IDE high-level drivers # CONFIG_PARIDE_PD=m CONFIG_PARIDE_PCD=m CONFIG_PARIDE_PF=m CONFIG_PARIDE_PT=m CONFIG_PARIDE_PG=m # # Parallel IDE protocol modules # CONFIG_PARIDE_ATEN=m CONFIG_PARIDE_BPCK=m CONFIG_PARIDE_COMM=m CONFIG_PARIDE_DSTR=m CONFIG_PARIDE_FIT2=m CONFIG_PARIDE_FIT3=m CONFIG_PARIDE_EPAT=m CONFIG_PARIDE_EPATC8=y CONFIG_PARIDE_EPIA=m CONFIG_PARIDE_FRIQ=m CONFIG_PARIDE_FRPW=m CONFIG_PARIDE_KBIC=m CONFIG_PARIDE_KTTI=m CONFIG_PARIDE_ON20=m CONFIG_PARIDE_ON26=m CONFIG_BLK_CPQ_DA=m CONFIG_BLK_CPQ_CISS_DA=m CONFIG_CISS_SCSI_TAPE=y CONFIG_BLK_DEV_DAC960=m CONFIG_BLK_DEV_UMEM=m # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_SX8=m # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m CONFIG_XEN_BLKDEV_FRONTEND=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set CONFIG_SGI_IOC4=m CONFIG_TIFM_CORE=m CONFIG_TIFM_7XX1=m # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_DELL_LAPTOP is not set # CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # # EEPROM support # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set CONFIG_EEPROM_93CX6=m # CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_RAID_ATTRS=m CONFIG_SCSI=m CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=m CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=m CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m # CONFIG_SCSI_FC_TGT_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_SAS_LIBSAS=m CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_SAS_HOST_SMP=y # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set CONFIG_SCSI_SRP_ATTRS=m # CONFIG_SCSI_SRP_TGT_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m CONFIG_SCSI_CXGB3_ISCSI=m CONFIG_SCSI_BNX2_ISCSI=m CONFIG_BLK_DEV_3W_XXXX_RAID=m CONFIG_SCSI_3W_9XXX=m CONFIG_SCSI_ACARD=m CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=4 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_AIC7XXX_DEBUG_MASK=0 # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set CONFIG_SCSI_AIC7XXX_OLD=m CONFIG_SCSI_AIC79XX=m CONFIG_AIC79XX_CMDS_PER_DEVICE=4 CONFIG_AIC79XX_RESET_DELAY_MS=15000 # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set CONFIG_SCSI_AIC94XX=m # CONFIG_AIC94XX_DEBUG is not set CONFIG_SCSI_MVSAS=m CONFIG_SCSI_MVSAS_DEBUG=y CONFIG_SCSI_DPT_I2O=m CONFIG_SCSI_ADVANSYS=m CONFIG_SCSI_ARCMSR=m # CONFIG_SCSI_ARCMSR_AER is not set CONFIG_MEGARAID_NEWGEN=y CONFIG_MEGARAID_MM=m CONFIG_MEGARAID_MAILBOX=m CONFIG_MEGARAID_LEGACY=m CONFIG_MEGARAID_SAS=m CONFIG_SCSI_MPT2SAS=m CONFIG_SCSI_MPT2SAS_MAX_SGE=128 # CONFIG_SCSI_MPT2SAS_LOGGING is not set CONFIG_SCSI_HPTIOP=m CONFIG_SCSI_BUSLOGIC=m CONFIG_LIBFC=m CONFIG_LIBFCOE=m CONFIG_FCOE=m CONFIG_FCOE_FNIC=m CONFIG_SCSI_DMX3191D=m CONFIG_SCSI_EATA=m # CONFIG_SCSI_EATA_TAGGED_QUEUE is not set # CONFIG_SCSI_EATA_LINKED_COMMANDS is not set CONFIG_SCSI_EATA_MAX_TAGS=16 CONFIG_SCSI_FUTURE_DOMAIN=m CONFIG_SCSI_GDTH=m CONFIG_SCSI_IPS=m CONFIG_SCSI_INITIO=m CONFIG_SCSI_INIA100=m CONFIG_SCSI_PPA=m CONFIG_SCSI_IMM=m # CONFIG_SCSI_IZIP_EPP16 is not set # CONFIG_SCSI_IZIP_SLOW_CTR is not set CONFIG_SCSI_STEX=m CONFIG_SCSI_SYM53C8XX_2=m CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y CONFIG_SCSI_IPR=m CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y CONFIG_SCSI_QLOGIC_1280=m CONFIG_SCSI_QLA_FC=m CONFIG_SCSI_QLA_ISCSI=m CONFIG_SCSI_LPFC=m # CONFIG_SCSI_LPFC_DEBUG_FS is not set CONFIG_SCSI_DC395x=m CONFIG_SCSI_DC390T=m CONFIG_SCSI_DEBUG=m CONFIG_SCSI_SRP=m CONFIG_SCSI_LOWLEVEL_PCMCIA=y # CONFIG_PCMCIA_FDOMAIN is not set CONFIG_PCMCIA_QLOGIC=m CONFIG_PCMCIA_SYM53C500=m # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=m CONFIG_SATA_SIL24=m CONFIG_ATA_SFF=y CONFIG_SATA_SVW=m CONFIG_ATA_PIIX=m CONFIG_SATA_MV=m CONFIG_SATA_NV=m CONFIG_PDC_ADMA=m CONFIG_SATA_QSTOR=m CONFIG_SATA_PROMISE=m CONFIG_SATA_SX4=m CONFIG_SATA_SIL=m CONFIG_SATA_SIS=m CONFIG_SATA_ULI=m CONFIG_SATA_VIA=m CONFIG_SATA_VITESSE=m CONFIG_SATA_INIC162X=m # CONFIG_PATA_ACPI is not set CONFIG_PATA_ALI=m CONFIG_PATA_AMD=m CONFIG_PATA_ARTOP=m CONFIG_PATA_ATIIXP=m CONFIG_PATA_CMD640_PCI=m CONFIG_PATA_CMD64X=m CONFIG_PATA_CS5520=m CONFIG_PATA_CS5530=m CONFIG_PATA_CYPRESS=m CONFIG_PATA_EFAR=m CONFIG_ATA_GENERIC=m CONFIG_PATA_HPT366=m CONFIG_PATA_HPT37X=m CONFIG_PATA_HPT3X2N=m CONFIG_PATA_HPT3X3=m CONFIG_PATA_HPT3X3_DMA=y CONFIG_PATA_IT821X=m CONFIG_PATA_IT8213=m CONFIG_PATA_JMICRON=m CONFIG_PATA_TRIFLEX=m CONFIG_PATA_MARVELL=m CONFIG_PATA_MPIIX=m CONFIG_PATA_OLDPIIX=m CONFIG_PATA_NETCELL=m # CONFIG_PATA_NINJA32 is not set CONFIG_PATA_NS87410=m # CONFIG_PATA_NS87415 is not set CONFIG_PATA_OPTI=m CONFIG_PATA_OPTIDMA=m CONFIG_PATA_PCMCIA=m CONFIG_PATA_PDC_OLD=m # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set CONFIG_PATA_SERVERWORKS=m CONFIG_PATA_PDC2027X=m CONFIG_PATA_SIL680=m CONFIG_PATA_SIS=m CONFIG_PATA_VIA=m CONFIG_PATA_WINBOND=m # CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID456=m CONFIG_MD_RAID6_PQ=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=m CONFIG_DM_DEBUG=y CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m # CONFIG_DM_LOG_USERSPACE is not set CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m # CONFIG_DM_MULTIPATH_QL is not set # CONFIG_DM_MULTIPATH_ST is not set # CONFIG_DM_DELAY is not set # CONFIG_DM_UEVENT is not set CONFIG_FUSION=y CONFIG_FUSION_SPI=m CONFIG_FUSION_FC=m CONFIG_FUSION_SAS=m CONFIG_FUSION_MAX_SGE=40 CONFIG_FUSION_CTL=m CONFIG_FUSION_LAN=m CONFIG_FUSION_LOGGING=y # # IEEE 1394 (FireWire) support # # # You can enable one or both FireWire driver stacks. # # # See the help texts for more information. # CONFIG_FIREWIRE=m CONFIG_FIREWIRE_OHCI=m CONFIG_FIREWIRE_OHCI_DEBUG=y CONFIG_FIREWIRE_SBP2=m # CONFIG_FIREWIRE_NET is not set # CONFIG_IEEE1394 is not set CONFIG_I2O=m # CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set CONFIG_I2O_EXT_ADAPTEC=y CONFIG_I2O_EXT_ADAPTEC_DMA64=y CONFIG_I2O_CONFIG=m CONFIG_I2O_CONFIG_OLD_IOCTL=y CONFIG_I2O_BUS=m CONFIG_I2O_BLOCK=m CONFIG_I2O_SCSI=m CONFIG_I2O_PROC=m CONFIG_MACINTOSH_DRIVERS=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y CONFIG_IFB=m CONFIG_DUMMY=m CONFIG_BONDING=m CONFIG_MACVLAN=m CONFIG_EQUALIZER=m # CONFIG_IMQ is not set CONFIG_TUN=m # CONFIG_VETH is not set CONFIG_NET_SB1000=m # CONFIG_ARCNET is not set CONFIG_PHYLIB=m # # MII PHY device drivers # CONFIG_MARVELL_PHY=m CONFIG_DAVICOM_PHY=m CONFIG_QSEMI_PHY=m CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m CONFIG_BROADCOM_PHY=m CONFIG_ICPLUS_PHY=m # CONFIG_REALTEK_PHY is not set # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_HAPPYMEAL=m CONFIG_SUNGEM=m CONFIG_CASSINI=m CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=m CONFIG_TYPHOON=m # CONFIG_ETHOC is not set # CONFIG_DNET is not set CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_DE2104X_DSL=0 CONFIG_TULIP=m # CONFIG_TULIP_MWI is not set CONFIG_TULIP_MMIO=y # CONFIG_TULIP_NAPI is not set CONFIG_DE4X5=m CONFIG_WINBOND_840=m CONFIG_DM9102=m CONFIG_ULI526X=m CONFIG_PCMCIA_XIRCOM=m # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m CONFIG_AMD8111_ETH=m CONFIG_ADAPTEC_STARFIRE=m CONFIG_B44=m CONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=y CONFIG_FORCEDETH=m CONFIG_FORCEDETH_NAPI=y CONFIG_E100=m CONFIG_FEALNX=m CONFIG_NATSEMI=m CONFIG_NE2K_PCI=m CONFIG_8139CP=m CONFIG_8139TOO=m # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set CONFIG_8139TOO_8129=y # CONFIG_8139_OLD_RX_RESET is not set # CONFIG_R6040 is not set CONFIG_SIS900=m CONFIG_EPIC100=m # CONFIG_SMSC9420 is not set CONFIG_SUNDANCE=m # CONFIG_SUNDANCE_MMIO is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y CONFIG_SC92031=m CONFIG_NET_POCKET=y CONFIG_ATP=m CONFIG_DE600=m CONFIG_DE620=m # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=m CONFIG_E1000=m CONFIG_E1000E=m # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_IGBVF is not set CONFIG_NS83820=m CONFIG_HAMACHI=m CONFIG_YELLOWFIN=m CONFIG_R8169=m CONFIG_R8169_VLAN=y CONFIG_SIS190=m CONFIG_SKGE=m # CONFIG_SKGE_DEBUG is not set CONFIG_SKY2=m # CONFIG_SKY2_DEBUG is not set CONFIG_VIA_VELOCITY=m CONFIG_TIGON3=m CONFIG_BNX2=m CONFIG_CNIC=m CONFIG_QLA3XXX=m CONFIG_ATL1=m # CONFIG_ATL1E is not set # CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y CONFIG_MDIO=m CONFIG_CHELSIO_T1=m CONFIG_CHELSIO_T1_1G=y CONFIG_CHELSIO_T3_DEPENDS=y CONFIG_CHELSIO_T3=m # CONFIG_ENIC is not set # CONFIG_IXGBE is not set CONFIG_IXGB=m CONFIG_S2IO=m # CONFIG_VXGE is not set CONFIG_MYRI10GE=m CONFIG_NETXEN_NIC=m # CONFIG_NIU is not set # CONFIG_MLX4_EN is not set CONFIG_MLX4_CORE=m CONFIG_MLX4_DEBUG=y # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set CONFIG_TR=y CONFIG_IBMOL=m CONFIG_3C359=m # CONFIG_TMS380TR is not set # # Wireless LAN # CONFIG_WLAN_PRE80211=y # CONFIG_STRIP is not set CONFIG_PCMCIA_WAVELAN=m CONFIG_PCMCIA_NETWAVE=m CONFIG_WLAN_80211=y # CONFIG_PCMCIA_RAYCS is not set # CONFIG_LIBERTAS is not set # CONFIG_LIBERTAS_THINFIRM is not set CONFIG_AIRO=m CONFIG_ATMEL=m CONFIG_PCI_ATMEL=m CONFIG_PCMCIA_ATMEL=m # CONFIG_AT76C50X_USB is not set CONFIG_AIRO_CS=m CONFIG_PCMCIA_WL3501=m CONFIG_PRISM54=m CONFIG_USB_ZD1201=m # CONFIG_USB_NET_RNDIS_WLAN is not set # CONFIG_RTL8180 is not set CONFIG_RTL8187=m CONFIG_RTL8187_LEDS=y CONFIG_ADM8211=m # CONFIG_MAC80211_HWSIM is not set # CONFIG_MWL8K is not set CONFIG_P54_COMMON=m CONFIG_P54_USB=m CONFIG_P54_PCI=m CONFIG_P54_LEDS=y CONFIG_ATH_COMMON=m CONFIG_ATH5K=m # CONFIG_ATH5K_DEBUG is not set # CONFIG_ATH9K is not set # CONFIG_AR9170_USB is not set CONFIG_IPW2100=m CONFIG_IPW2100_MONITOR=y # CONFIG_IPW2100_DEBUG is not set CONFIG_IPW2200=m CONFIG_IPW2200_MONITOR=y CONFIG_IPW2200_RADIOTAP=y CONFIG_IPW2200_PROMISCUOUS=y CONFIG_IPW2200_QOS=y # CONFIG_IPW2200_DEBUG is not set CONFIG_LIBIPW=m # CONFIG_LIBIPW_DEBUG is not set CONFIG_IWLWIFI=m # CONFIG_IWLWIFI_LEDS is not set CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y CONFIG_IWLWIFI_DEBUG=y # CONFIG_IWLAGN is not set CONFIG_IWL3945=m # CONFIG_IWL3945_SPECTRUM_MEASUREMENT is not set CONFIG_HOSTAP=m CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y CONFIG_HOSTAP_PLX=m CONFIG_HOSTAP_PCI=m CONFIG_HOSTAP_CS=m CONFIG_B43=m CONFIG_B43_PCI_AUTOSELECT=y CONFIG_B43_PCICORE_AUTOSELECT=y CONFIG_B43_PCMCIA=y CONFIG_B43_PIO=y CONFIG_B43_LEDS=y CONFIG_B43_HWRNG=y CONFIG_B43_DEBUG=y # CONFIG_B43_FORCE_PIO is not set CONFIG_B43LEGACY=m CONFIG_B43LEGACY_PCI_AUTOSELECT=y CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y CONFIG_B43LEGACY_LEDS=y CONFIG_B43LEGACY_HWRNG=y CONFIG_B43LEGACY_DEBUG=y CONFIG_B43LEGACY_DMA=y CONFIG_B43LEGACY_PIO=y CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y # CONFIG_B43LEGACY_DMA_MODE is not set # CONFIG_B43LEGACY_PIO_MODE is not set # CONFIG_ZD1211RW is not set CONFIG_RT2X00=m CONFIG_RT2400PCI=m CONFIG_RT2500PCI=m CONFIG_RT61PCI=m CONFIG_RT2500USB=m CONFIG_RT73USB=m # CONFIG_RT2800USB is not set CONFIG_RT2X00_LIB_PCI=m CONFIG_RT2X00_LIB_USB=m CONFIG_RT2X00_LIB=m CONFIG_RT2X00_LIB_FIRMWARE=y CONFIG_RT2X00_LIB_CRYPTO=y CONFIG_RT2X00_LIB_RFKILL=y CONFIG_RT2X00_LIB_LEDS=y # CONFIG_RT2X00_DEBUG is not set CONFIG_HERMES=m CONFIG_HERMES_CACHE_FW_ON_INIT=y CONFIG_PLX_HERMES=m CONFIG_TMD_HERMES=m CONFIG_NORTEL_HERMES=m CONFIG_PCI_HERMES=m CONFIG_PCMCIA_HERMES=m CONFIG_PCMCIA_SPECTRUM=m # CONFIG_IWM is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # # USB Network Adapters # CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_CDCETHER=m # CONFIG_USB_NET_CDC_EEM is not set CONFIG_USB_NET_DM9601=m # CONFIG_USB_NET_SMSC95XX is not set CONFIG_USB_NET_GL620A=m CONFIG_USB_NET_NET1080=m CONFIG_USB_NET_PLUSB=m CONFIG_USB_NET_MCS7830=m CONFIG_USB_NET_RNDIS_HOST=m CONFIG_USB_NET_CDC_SUBSET=m CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y CONFIG_USB_BELKIN=y CONFIG_USB_ARMLINUX=y CONFIG_USB_EPSON2888=y CONFIG_USB_KC2190=y CONFIG_USB_NET_ZAURUS=m # CONFIG_USB_HSO is not set # CONFIG_USB_NET_INT51X1 is not set CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_3C589=m CONFIG_PCMCIA_3C574=m CONFIG_PCMCIA_FMVJ18X=m CONFIG_PCMCIA_PCNET=m CONFIG_PCMCIA_NMCLAN=m CONFIG_PCMCIA_SMC91C92=m CONFIG_PCMCIA_XIRC2PS=m CONFIG_PCMCIA_AXNET=m # CONFIG_PCMCIA_IBMTR is not set # CONFIG_WAN is not set CONFIG_ATM_DRIVERS=y # CONFIG_ATM_DUMMY is not set CONFIG_ATM_TCP=m CONFIG_ATM_LANAI=m CONFIG_ATM_ENI=m # CONFIG_ATM_ENI_DEBUG is not set # CONFIG_ATM_ENI_TUNE_BURST is not set CONFIG_ATM_FIRESTREAM=m # CONFIG_ATM_ZATM is not set CONFIG_ATM_IDT77252=m # CONFIG_ATM_IDT77252_DEBUG is not set # CONFIG_ATM_IDT77252_RCV_ALL is not set CONFIG_ATM_IDT77252_USE_SUNI=y CONFIG_ATM_AMBASSADOR=m # CONFIG_ATM_AMBASSADOR_DEBUG is not set CONFIG_ATM_HORIZON=m # CONFIG_ATM_HORIZON_DEBUG is not set # CONFIG_ATM_IA is not set # CONFIG_ATM_FORE200E is not set CONFIG_ATM_HE=m # CONFIG_ATM_HE_USE_SUNI is not set # CONFIG_ATM_SOLOS is not set CONFIG_XEN_NETDEV_FRONTEND=m # CONFIG_XEN_NETCHANNEL2 is not set CONFIG_FDDI=y # CONFIG_DEFXX is not set CONFIG_SKFP=m # CONFIG_HIPPI is not set CONFIG_PLIP=m CONFIG_PPP=m CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set CONFIG_PPP_MPPE=m CONFIG_PPPOE=m CONFIG_PPPOATM=m CONFIG_PPPOL2TP=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLHC=m CONFIG_SLIP_SMART=y # CONFIG_SLIP_MODE_SLIP6 is not set CONFIG_NET_FC=y CONFIG_NETCONSOLE=m # CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_POLLDEV=m # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set CONFIG_XEN_KBDDEV_FRONTEND=m # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_APPLETOUCH=m # CONFIG_MOUSE_BCM5974 is not set CONFIG_MOUSE_VSXXXAA=m # CONFIG_MOUSE_SYNAPTICS_I2C is not set CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=m CONFIG_JOYSTICK_A3D=m CONFIG_JOYSTICK_ADI=m CONFIG_JOYSTICK_COBRA=m CONFIG_JOYSTICK_GF2K=m CONFIG_JOYSTICK_GRIP=m CONFIG_JOYSTICK_GRIP_MP=m CONFIG_JOYSTICK_GUILLEMOT=m CONFIG_JOYSTICK_INTERACT=m CONFIG_JOYSTICK_SIDEWINDER=m CONFIG_JOYSTICK_TMDC=m CONFIG_JOYSTICK_IFORCE=m CONFIG_JOYSTICK_IFORCE_USB=y CONFIG_JOYSTICK_IFORCE_232=y CONFIG_JOYSTICK_WARRIOR=m CONFIG_JOYSTICK_MAGELLAN=m CONFIG_JOYSTICK_SPACEORB=m CONFIG_JOYSTICK_SPACEBALL=m CONFIG_JOYSTICK_STINGER=m CONFIG_JOYSTICK_TWIDJOY=m # CONFIG_JOYSTICK_ZHENHUA is not set CONFIG_JOYSTICK_DB9=m CONFIG_JOYSTICK_GAMECON=m CONFIG_JOYSTICK_TURBOGRAFX=m CONFIG_JOYSTICK_JOYDUMP=m CONFIG_JOYSTICK_XPAD=m CONFIG_JOYSTICK_XPAD_FF=y CONFIG_JOYSTICK_XPAD_LEDS=y # CONFIG_JOYSTICK_WALKERA0701 is not set CONFIG_INPUT_TABLET=y CONFIG_TABLET_USB_ACECAD=m CONFIG_TABLET_USB_AIPTEK=m CONFIG_TABLET_USB_GTCO=m CONFIG_TABLET_USB_KBTAB=m CONFIG_TABLET_USB_WACOM=m CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879_I2C is not set # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_EETI is not set CONFIG_TOUCHSCREEN_FUJITSU=m CONFIG_TOUCHSCREEN_GUNZE=m CONFIG_TOUCHSCREEN_ELO=m # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set CONFIG_TOUCHSCREEN_MTOUCH=m # CONFIG_TOUCHSCREEN_INEXIO is not set CONFIG_TOUCHSCREEN_MK712=m CONFIG_TOUCHSCREEN_PENMOUNT=m CONFIG_TOUCHSCREEN_TOUCHRIGHT=m CONFIG_TOUCHSCREEN_TOUCHWIN=m # CONFIG_TOUCHSCREEN_WM97XX is not set CONFIG_TOUCHSCREEN_USB_COMPOSITE=m CONFIG_TOUCHSCREEN_USB_EGALAX=y CONFIG_TOUCHSCREEN_USB_PANJIT=y CONFIG_TOUCHSCREEN_USB_3M=y CONFIG_TOUCHSCREEN_USB_ITM=y CONFIG_TOUCHSCREEN_USB_ETURBO=y CONFIG_TOUCHSCREEN_USB_GUNZE=y CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y CONFIG_TOUCHSCREEN_USB_IRTOUCH=y CONFIG_TOUCHSCREEN_USB_IDEALTEK=y CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y CONFIG_TOUCHSCREEN_USB_GOTOP=y # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_TOUCHSCREEN_W90X900 is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_APANEL is not set CONFIG_INPUT_ATLAS_BTNS=m CONFIG_INPUT_ATI_REMOTE=m CONFIG_INPUT_ATI_REMOTE2=m CONFIG_INPUT_KEYSPAN_REMOTE=m CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m # CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=m # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m CONFIG_GAMEPORT=m CONFIG_GAMEPORT_NS558=m CONFIG_GAMEPORT_L4=m CONFIG_GAMEPORT_EMU10K1=m CONFIG_GAMEPORT_FM801=m # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_DEVKMEM=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_COMPUTONE is not set CONFIG_ROCKETPORT=m CONFIG_CYCLADES=m # CONFIG_CYZ_INTR is not set # CONFIG_DIGIEPCA is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set CONFIG_SYNCLINK=m CONFIG_SYNCLINKMP=m CONFIG_SYNCLINK_GT=m CONFIG_N_HDLC=m # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set # CONFIG_STALDRV is not set # CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set CONFIG_PRINTER=m CONFIG_LP_CONSOLE=y CONFIG_PPDEV=m CONFIG_HVC_DRIVER=y CONFIG_HVC_IRQ=y CONFIG_HVC_XEN=y CONFIG_IPMI_HANDLER=m # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=m CONFIG_IPMI_SI=m CONFIG_IPMI_WATCHDOG=m CONFIG_IPMI_POWEROFF=m CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_HW_RANDOM_INTEL=m CONFIG_HW_RANDOM_AMD=m CONFIG_HW_RANDOM_VIA=y CONFIG_NVRAM=y CONFIG_RTC=y CONFIG_R3964=m # CONFIG_APPLICOM is not set # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set CONFIG_CARDMAN_4000=m CONFIG_CARDMAN_4040=m # CONFIG_IPWIRELESS is not set CONFIG_MWAVE=m CONFIG_PC8736x_GPIO=m CONFIG_NSC_GPIO=m # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_MMAP is not set CONFIG_HANGCHECK_TIMER=m CONFIG_TCG_TPM=m CONFIG_TCG_TIS=m CONFIG_TCG_NSC=m CONFIG_TCG_ATMEL=m CONFIG_TCG_INFINEON=m # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set CONFIG_I2C_AMD756=m CONFIG_I2C_AMD756_S4882=m CONFIG_I2C_AMD8111=m CONFIG_I2C_I801=m # CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set CONFIG_I2C_NFORCE2=m # CONFIG_I2C_NFORCE2_S4985 is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set CONFIG_I2C_SIS96X=m CONFIG_I2C_VIA=m CONFIG_I2C_VIAPRO=m # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_OCORES is not set CONFIG_I2C_SIMTEC=m # # External I2C/SMBus adapter drivers # CONFIG_I2C_PARPORT=m CONFIG_I2C_PARPORT_LIGHT=m # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set # # Graphics adapter I2C/DDC channel drivers # CONFIG_I2C_VOODOO3=m # # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set CONFIG_I2C_STUB=m # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set CONFIG_SENSORS_PCF8574=m # CONFIG_PCF8575 is not set CONFIG_SENSORS_PCA9539=m CONFIG_SENSORS_TSL2550=m # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # # PPS support # # CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_BATTERY_DS2782 is not set # CONFIG_BATTERY_BQ27x00 is not set # CONFIG_BATTERY_MAX17040 is not set CONFIG_HWMON=m CONFIG_HWMON_VID=m CONFIG_SENSORS_ABITUGURU=m CONFIG_SENSORS_ABITUGURU3=m # CONFIG_SENSORS_AD7414 is not set CONFIG_SENSORS_AD7418=m CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ADM1025=m CONFIG_SENSORS_ADM1026=m CONFIG_SENSORS_ADM1029=m CONFIG_SENSORS_ADM1031=m CONFIG_SENSORS_ADM9240=m # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set CONFIG_SENSORS_K8TEMP=m CONFIG_SENSORS_ASB100=m # CONFIG_SENSORS_ATK0110 is not set CONFIG_SENSORS_ATXP1=m CONFIG_SENSORS_DS1621=m # CONFIG_SENSORS_I5K_AMB is not set CONFIG_SENSORS_F71805F=m # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set CONFIG_SENSORS_FSCHER=m CONFIG_SENSORS_FSCPOS=m # CONFIG_SENSORS_FSCHMD is not set # CONFIG_SENSORS_G760A is not set CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m CONFIG_SENSORS_CORETEMP=m # CONFIG_SENSORS_IBMAEM is not set # CONFIG_SENSORS_IBMPEX is not set CONFIG_SENSORS_IT87=m CONFIG_SENSORS_LM63=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM80=m CONFIG_SENSORS_LM83=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_LM87=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_LM92=m CONFIG_SENSORS_LM93=m # CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_LM95241 is not set CONFIG_SENSORS_MAX1619=m CONFIG_SENSORS_MAX6650=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m CONFIG_SENSORS_PCF8591=m CONFIG_SENSORS_SIS5595=m CONFIG_SENSORS_DME1737=m CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_SMSC47M192=m CONFIG_SENSORS_SMSC47B397=m # CONFIG_SENSORS_ADS7828 is not set CONFIG_SENSORS_THMC50=m # CONFIG_SENSORS_TMP401 is not set CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_VT1211=m CONFIG_SENSORS_VT8231=m CONFIG_SENSORS_W83781D=m CONFIG_SENSORS_W83791D=m CONFIG_SENSORS_W83792D=m CONFIG_SENSORS_W83793=m CONFIG_SENSORS_W83L785TS=m # CONFIG_SENSORS_W83L786NG is not set CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83627EHF=m CONFIG_SENSORS_HDAPS=m # CONFIG_SENSORS_LIS3LV02D is not set CONFIG_SENSORS_APPLESMC=m # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=m # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set CONFIG_ALIM1535_WDT=m CONFIG_ALIM7101_WDT=m # CONFIG_SC520_WDT is not set # CONFIG_EUROTECH_WDT is not set # CONFIG_IB700_WDT is not set CONFIG_IBMASR=m # CONFIG_WAFER_WDT is not set CONFIG_I6300ESB_WDT=m CONFIG_ITCO_WDT=m CONFIG_ITCO_VENDOR_SUPPORT=y # CONFIG_IT8712F_WDT is not set # CONFIG_IT87_WDT is not set # CONFIG_HP_WATCHDOG is not set # CONFIG_SC1200_WDT is not set # CONFIG_PC87413_WDT is not set # CONFIG_60XX_WDT is not set # CONFIG_SBC8360_WDT is not set # CONFIG_CPU5_WDT is not set # CONFIG_SMSC_SCH311X_WDT is not set # CONFIG_SMSC37B787_WDT is not set CONFIG_W83627HF_WDT=m CONFIG_W83697HF_WDT=m # CONFIG_W83697UG_WDT is not set CONFIG_W83877F_WDT=m CONFIG_W83977F_WDT=m CONFIG_MACHZ_WDT=m # CONFIG_SBC_EPX_C3_WATCHDOG is not set # # PCI-based Watchdog Cards # CONFIG_PCIPCWATCHDOG=m CONFIG_WDTPCI=m # # USB-based Watchdog Cards # CONFIG_USBPCWATCHDOG=m CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # CONFIG_SSB=m CONFIG_SSB_SPROM=y CONFIG_SSB_BLOCKIO=y CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y CONFIG_SSB_B43_PCI_BRIDGE=y CONFIG_SSB_PCMCIAHOST_POSSIBLE=y CONFIG_SSB_PCMCIAHOST=y # CONFIG_SSB_DEBUG is not set CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y CONFIG_SSB_DRIVER_PCICORE=y # # Multifunction device drivers # # CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=m # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # CONFIG_AGP=y CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y CONFIG_AGP_SIS=y CONFIG_AGP_VIA=y CONFIG_DRM=m CONFIG_DRM_TDFX=m CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m CONFIG_DRM_I810=m CONFIG_DRM_I830=m CONFIG_DRM_I915=m # CONFIG_DRM_I915_KMS is not set CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m CONFIG_DRM_VIA=m CONFIG_DRM_SAVAGE=m CONFIG_VGASTATE=m CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set CONFIG_FB_DDC=m CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set CONFIG_FB_SYS_FILLRECT=m CONFIG_FB_SYS_COPYAREA=m CONFIG_FB_SYS_IMAGEBLIT=m # CONFIG_FB_FOREIGN_ENDIAN is not set CONFIG_FB_SYS_FOPS=m CONFIG_FB_DEFERRED_IO=y CONFIG_FB_SVGALIB=m # CONFIG_FB_MACMODES is not set CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # CONFIG_FB_CIRRUS=m # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_VGA16=m # CONFIG_FB_UVESA is not set CONFIG_FB_VESA=y # CONFIG_FB_N411 is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_NVIDIA=m CONFIG_FB_NVIDIA_I2C=y # CONFIG_FB_NVIDIA_DEBUG is not set CONFIG_FB_NVIDIA_BACKLIGHT=y CONFIG_FB_RIVA=m # CONFIG_FB_RIVA_I2C is not set # CONFIG_FB_RIVA_DEBUG is not set CONFIG_FB_RIVA_BACKLIGHT=y # CONFIG_FB_LE80578 is not set CONFIG_FB_MATROX=m CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y CONFIG_FB_MATROX_G=y CONFIG_FB_MATROX_I2C=m CONFIG_FB_MATROX_MAVEN=m CONFIG_FB_MATROX_MULTIHEAD=y CONFIG_FB_RADEON=m CONFIG_FB_RADEON_I2C=y CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_RADEON_DEBUG is not set CONFIG_FB_ATY128=m CONFIG_FB_ATY128_BACKLIGHT=y CONFIG_FB_ATY=m CONFIG_FB_ATY_CT=y CONFIG_FB_ATY_GENERIC_LCD=y CONFIG_FB_ATY_GX=y CONFIG_FB_ATY_BACKLIGHT=y CONFIG_FB_S3=m CONFIG_FB_SAVAGE=m CONFIG_FB_SAVAGE_I2C=y CONFIG_FB_SAVAGE_ACCEL=y # CONFIG_FB_SIS is not set # CONFIG_FB_VIA is not set CONFIG_FB_NEOMAGIC=m CONFIG_FB_KYRO=m CONFIG_FB_3DFX=m CONFIG_FB_3DFX_ACCEL=y CONFIG_FB_3DFX_I2C=y CONFIG_FB_VOODOO1=m # CONFIG_FB_VT8623 is not set CONFIG_FB_TRIDENT=m # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_GEODE is not set CONFIG_FB_SM501=m # CONFIG_FB_VIRTUAL is not set CONFIG_XEN_FBDEV_FRONTEND=m # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=y CONFIG_BACKLIGHT_PROGEAR=m # CONFIG_BACKLIGHT_MBP_NVIDIA is not set # CONFIG_BACKLIGHT_SAHARA is not set # # Display device support # CONFIG_DISPLAY_SUPPORT=m # # Display hardware drivers # # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_SEQUENCER=m CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_HRTIMER is not set CONFIG_SND_RTCTIMER=m CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y CONFIG_SND_DYNAMIC_MINORS=y # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y CONFIG_SND_RAWMIDI_SEQ=m CONFIG_SND_OPL3_LIB_SEQ=m # CONFIG_SND_OPL4_LIB_SEQ is not set # CONFIG_SND_SBAWE_SEQ is not set CONFIG_SND_EMU10K1_SEQ=m CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_VX_LIB=m CONFIG_SND_AC97_CODEC=m CONFIG_SND_DRIVERS=y # CONFIG_SND_PCSP is not set CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_MTS64=m # CONFIG_SND_SERIAL_U16550 is not set CONFIG_SND_MPU401=m CONFIG_SND_PORTMAN2X4=m CONFIG_SND_AC97_POWER_SAVE=y CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 CONFIG_SND_SB_COMMON=m CONFIG_SND_SB16_DSP=m CONFIG_SND_PCI=y CONFIG_SND_AD1889=m CONFIG_SND_ALS300=m CONFIG_SND_ALS4000=m CONFIG_SND_ALI5451=m CONFIG_SND_ATIIXP=m CONFIG_SND_ATIIXP_MODEM=m CONFIG_SND_AU8810=m CONFIG_SND_AU8820=m CONFIG_SND_AU8830=m # CONFIG_SND_AW2 is not set CONFIG_SND_AZT3328=m CONFIG_SND_BT87X=m # CONFIG_SND_BT87X_OVERCLOCK is not set CONFIG_SND_CA0106=m CONFIG_SND_CMIPCI=m # CONFIG_SND_OXYGEN is not set CONFIG_SND_CS4281=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y CONFIG_SND_CS5530=m # CONFIG_SND_CTXFI is not set CONFIG_SND_DARLA20=m CONFIG_SND_GINA20=m CONFIG_SND_LAYLA20=m CONFIG_SND_DARLA24=m CONFIG_SND_GINA24=m CONFIG_SND_LAYLA24=m CONFIG_SND_MONA=m CONFIG_SND_MIA=m CONFIG_SND_ECHO3G=m CONFIG_SND_INDIGO=m CONFIG_SND_INDIGOIO=m CONFIG_SND_INDIGODJ=m # CONFIG_SND_INDIGOIOX is not set # CONFIG_SND_INDIGODJX is not set CONFIG_SND_EMU10K1=m CONFIG_SND_EMU10K1X=m CONFIG_SND_ENS1370=m CONFIG_SND_ENS1371=m CONFIG_SND_ES1938=m CONFIG_SND_ES1968=m CONFIG_SND_FM801=m CONFIG_SND_HDA_INTEL=m CONFIG_SND_HDA_HWDEP=y # CONFIG_SND_HDA_RECONFIG is not set # CONFIG_SND_HDA_INPUT_BEEP is not set # CONFIG_SND_HDA_INPUT_JACK is not set CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_ATIHDMI=y CONFIG_SND_HDA_CODEC_NVHDMI=y CONFIG_SND_HDA_CODEC_INTELHDMI=y CONFIG_SND_HDA_ELD=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CA0110=y CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y CONFIG_SND_HDA_POWER_SAVE=y CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 CONFIG_SND_HDSP=m CONFIG_SND_HDSPM=m # CONFIG_SND_HIFIER is not set CONFIG_SND_ICE1712=m CONFIG_SND_ICE1724=m CONFIG_SND_INTEL8X0=m CONFIG_SND_INTEL8X0M=m CONFIG_SND_KORG1212=m # CONFIG_SND_LX6464ES is not set CONFIG_SND_MAESTRO3=m CONFIG_SND_MIXART=m CONFIG_SND_NM256=m CONFIG_SND_PCXHR=m CONFIG_SND_RIPTIDE=m CONFIG_SND_RME32=m CONFIG_SND_RME96=m CONFIG_SND_RME9652=m CONFIG_SND_SONICVIBES=m CONFIG_SND_TRIDENT=m CONFIG_SND_VIA82XX=m CONFIG_SND_VIA82XX_MODEM=m # CONFIG_SND_VIRTUOSO is not set CONFIG_SND_VX222=m CONFIG_SND_YMFPCI=m CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=m CONFIG_SND_USB_USX2Y=m CONFIG_SND_USB_CAIAQ=m CONFIG_SND_USB_CAIAQ_INPUT=y # CONFIG_SND_USB_US122L is not set CONFIG_SND_PCMCIA=y # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_PDAUDIOCF is not set # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y # # Special HID drivers # CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y CONFIG_HID_DRAGONRISE=y # CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y CONFIG_LOGITECH_FF=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y CONFIG_HID_NTRIG=y CONFIG_HID_PANTHERLORD=y CONFIG_PANTHERLORD_FF=y CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_HID_GREENASIA=y # CONFIG_GREENASIA_FF is not set CONFIG_HID_SMARTJOYPLUS=y # CONFIG_SMARTJOYPLUS_FF is not set CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_THRUSTMASTER_FF=y CONFIG_HID_WACOM=m CONFIG_HID_ZEROPLUS=y CONFIG_ZEROPLUS_FF=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set CONFIG_USB_MON=y # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_OXU210HP_HCD is not set CONFIG_USB_ISP116X_HCD=m # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_HCD_SSB is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m CONFIG_USB_U132_HCD=m CONFIG_USB_SL811_HCD=m # CONFIG_USB_SL811_CS is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=m CONFIG_USB_STORAGE_FREECOM=m # CONFIG_USB_STORAGE_ISD200 is not set CONFIG_USB_STORAGE_USBAT=m CONFIG_USB_STORAGE_SDDR09=m CONFIG_USB_STORAGE_SDDR55=m CONFIG_USB_STORAGE_JUMPSHOT=m CONFIG_USB_STORAGE_ALAUDA=m # CONFIG_USB_STORAGE_ONETOUCH is not set CONFIG_USB_STORAGE_KARMA=m # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m # # USB port drivers # CONFIG_USB_USS720=m CONFIG_USB_SERIAL=m CONFIG_USB_EZUSB=y CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_AIRCABLE=m CONFIG_USB_SERIAL_ARK3116=m CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_CH341 is not set CONFIG_USB_SERIAL_WHITEHEAT=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m # CONFIG_USB_SERIAL_CP210X is not set CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_FUNSOFT=m CONFIG_USB_SERIAL_VISOR=m CONFIG_USB_SERIAL_IPAQ=m CONFIG_USB_SERIAL_IR=m CONFIG_USB_SERIAL_EDGEPORT=m CONFIG_USB_SERIAL_EDGEPORT_TI=m CONFIG_USB_SERIAL_GARMIN=m CONFIG_USB_SERIAL_IPW=m # CONFIG_USB_SERIAL_IUU is not set CONFIG_USB_SERIAL_KEYSPAN_PDA=m CONFIG_USB_SERIAL_KEYSPAN=m CONFIG_USB_SERIAL_KEYSPAN_MPR=y CONFIG_USB_SERIAL_KEYSPAN_USA28=y CONFIG_USB_SERIAL_KEYSPAN_USA28X=y CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y CONFIG_USB_SERIAL_KEYSPAN_USA19=y CONFIG_USB_SERIAL_KEYSPAN_USA18X=y CONFIG_USB_SERIAL_KEYSPAN_USA19W=y CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y CONFIG_USB_SERIAL_KEYSPAN_USA49W=y CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_MOS7720=m CONFIG_USB_SERIAL_MOS7840=m # CONFIG_USB_SERIAL_MOTOROLA is not set CONFIG_USB_SERIAL_NAVMAN=m CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_OTI6858=m # CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set CONFIG_USB_SERIAL_HP4X=m CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y # CONFIG_USB_SERIAL_SIEMENS_MPI is not set CONFIG_USB_SERIAL_SIERRAWIRELESS=m # CONFIG_USB_SERIAL_SYMBOL is not set CONFIG_USB_SERIAL_TI=m CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_OPTION=m CONFIG_USB_SERIAL_OMNINET=m # CONFIG_USB_SERIAL_OPTICON is not set CONFIG_USB_SERIAL_DEBUG=m # # USB Miscellaneous drivers # CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m CONFIG_USB_ADUTUX=m # CONFIG_USB_SEVSEG is not set CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_BERRY_CHARGE=m CONFIG_USB_LED=m # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set CONFIG_USB_IDMOUSE=m CONFIG_USB_FTDI_ELAN=m CONFIG_USB_APPLEDISPLAY=m CONFIG_USB_SISUSBVGA=m CONFIG_USB_SISUSBVGA_CON=y CONFIG_USB_LD=m CONFIG_USB_TRANCEVIBRATOR=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set CONFIG_USB_ATM=m CONFIG_USB_SPEEDTOUCH=m CONFIG_USB_CXACRU=m CONFIG_USB_UEAGLEATM=m CONFIG_USB_XUSBATM=m # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # # CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # # MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set # CONFIG_MMC_TEST is not set # # MMC/SD/SDIO Host Controller Drivers # CONFIG_MMC_SDHCI=m # CONFIG_MMC_SDHCI_PCI is not set # CONFIG_MMC_SDHCI_PLTFM is not set CONFIG_MMC_WBSD=m CONFIG_MMC_TIFM_SD=m # CONFIG_MMC_SDRICOH_CS is not set # CONFIG_MMC_CB710 is not set # CONFIG_MMC_VIA_SDMMC is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # # CONFIG_LEDS_ALIX2 is not set # CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_CLEVO_MAIL is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_BD2802 is not set # # LED Triggers # CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_HEARTBEAT=m # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set # # iptables trigger is under Netfilter config (LED target) # # CONFIG_ACCESSIBILITY is not set CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_MAD=m CONFIG_INFINIBAND_USER_ACCESS=m CONFIG_INFINIBAND_USER_MEM=y CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_IPATH=m CONFIG_INFINIBAND_AMSO1100=m # CONFIG_INFINIBAND_AMSO1100_DEBUG is not set CONFIG_INFINIBAND_CXGB3=m # CONFIG_INFINIBAND_CXGB3_DEBUG is not set CONFIG_MLX4_INFINIBAND=m # CONFIG_INFINIBAND_NES is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_CM is not set CONFIG_INFINIBAND_IPOIB_DEBUG=y CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_ISER=m CONFIG_EDAC=y # # Reporting subsystems # # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=m # CONFIG_EDAC_AMD64 is not set CONFIG_EDAC_E752X=m CONFIG_EDAC_I82975X=m # CONFIG_EDAC_I3000 is not set # CONFIG_EDAC_X38 is not set # CONFIG_EDAC_I5400 is not set CONFIG_EDAC_I5000=m # CONFIG_EDAC_I5100 is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set CONFIG_AUXDISPLAY=y CONFIG_KS0108=m CONFIG_KS0108_PORT=0x378 CONFIG_KS0108_DELAY=2 CONFIG_CFAG12864B=m CONFIG_CFAG12864B_RATE=20 CONFIG_UIO=m CONFIG_UIO_CIF=m # CONFIG_UIO_PDRV is not set # CONFIG_UIO_PDRV_GENIRQ is not set # CONFIG_UIO_SMX is not set # CONFIG_UIO_AEC is not set # CONFIG_UIO_SERCOS3 is not set # # TI VLYNQ # CONFIG_XEN_BALLOON=y CONFIG_XEN_SCRUB_PAGES=y CONFIG_XEN_DEV_EVTCHN=y CONFIG_XEN_BACKEND=y CONFIG_XEN_BLKDEV_BACKEND=y CONFIG_XEN_BLKDEV_TAP=y CONFIG_XEN_BLKBACK_PAGEMAP=y CONFIG_XEN_NETDEV_BACKEND=y CONFIG_XEN_PCIDEV_BACKEND=y CONFIG_XEN_PCIDEV_BACKEND_VPCI=y # CONFIG_XEN_PCIDEV_BACKEND_PASS is not set # CONFIG_XEN_PCIDEV_BACKEND_SLOT is not set # CONFIG_XEN_PCIDEV_BACKEND_CONTROLLER is not set # CONFIG_XEN_PCIDEV_BE_DEBUG is not set CONFIG_XENFS=y CONFIG_XEN_COMPAT_XENFS=y CONFIG_XEN_SYS_HYPERVISOR=y CONFIG_XEN_XENBUS_FRONTEND=y CONFIG_XEN_S3=y # CONFIG_XEN_GNTDEV is not set CONFIG_XEN_MCE=y CONFIG_ACPI_PROCESSOR_XEN=y # CONFIG_STAGING is not set CONFIG_X86_PLATFORM_DEVICES=y # CONFIG_ACER_WMI is not set CONFIG_ASUS_LAPTOP=m # CONFIG_FUJITSU_LAPTOP is not set CONFIG_MSI_LAPTOP=m # CONFIG_PANASONIC_LAPTOP is not set # CONFIG_COMPAL_LAPTOP is not set CONFIG_SONY_LAPTOP=m CONFIG_SONYPI_COMPAT=y CONFIG_THINKPAD_ACPI=m # CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set # CONFIG_THINKPAD_ACPI_DEBUG is not set # CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set CONFIG_THINKPAD_ACPI_VIDEO=y CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y # CONFIG_INTEL_MENLOW is not set # CONFIG_EEEPC_LAPTOP is not set # CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set CONFIG_ACPI_TOSHIBA=m # # Firmware Drivers # CONFIG_EDD=m # CONFIG_EDD_OFF is not set CONFIG_FIRMWARE_MEMMAP=y CONFIG_DELL_RBU=m CONFIG_DCDBAS=m CONFIG_DMIID=y # CONFIG_ISCSI_IBFT_FIND is not set # # File systems # CONFIG_EXT2_FS=m CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XIP=y CONFIG_EXT3_FS=m # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4_FS is not set CONFIG_FS_XIP=y CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=m # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=y CONFIG_REISERFS_FS_XATTR=y CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y CONFIG_JFS_FS=m CONFIG_JFS_POSIX_ACL=y CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set # CONFIG_XFS_DEBUG is not set CONFIG_GFS2_FS=m # CONFIG_GFS2_FS_LOCKING_DLM is not set CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m CONFIG_OCFS2_FS_STATS=y # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set # CONFIG_OCFS2_FS_POSIX_ACL is not set # CONFIG_BTRFS_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y # CONFIG_QUOTA_NETLINK_INTERFACE is not set CONFIG_PRINT_QUOTA_WARNING=y CONFIG_QUOTA_TREE=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m # CONFIG_CUSE is not set CONFIG_GENERIC_ACL=y # # Caches # # CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="ascii" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=m CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_ECRYPT_FS=m CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_BEFS_FS=m # CONFIG_BEFS_DEBUG is not set CONFIG_BFS_FS=m CONFIG_EFS_FS=m CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_FS_WBUF_VERIFY is not set CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_FS_XATTR=y CONFIG_JFFS2_FS_POSIX_ACL=y CONFIG_JFFS2_FS_SECURITY=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_UBIFS_FS is not set CONFIG_CRAMFS=m CONFIG_SQUASHFS=m # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 CONFIG_VXFS_FS=m CONFIG_MINIX_FS=m # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set CONFIG_QNX4FS_FS=m CONFIG_ROMFS_FS=m CONFIG_ROMFS_BACKED_BY_BLOCK=y # CONFIG_ROMFS_BACKED_BY_MTD is not set # CONFIG_ROMFS_BACKED_BY_BOTH is not set CONFIG_ROMFS_ON_BLOCK=y CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set # CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y # CONFIG_NFS_V4_1 is not set CONFIG_NFSD=m CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_SUNRPC_XPRT_RDMA=m CONFIG_RPCSEC_GSS_KRB5=m CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set CONFIG_CIFS_WEAK_PW_HASH=y # CONFIG_CIFS_UPCALL is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_DFS_UPCALL is not set # CONFIG_CIFS_EXPERIMENTAL is not set CONFIG_NCP_FS=m CONFIG_NCPFS_PACKET_SIGNING=y CONFIG_NCPFS_IOCTL_LOCKING=y CONFIG_NCPFS_STRONG=y CONFIG_NCPFS_NFS_NS=y CONFIG_NCPFS_OS2_NS=y CONFIG_NCPFS_SMALLDOS=y CONFIG_NCPFS_NLS=y CONFIG_NCPFS_EXTRAS=y CONFIG_CODA_FS=m # CONFIG_AFS_FS is not set CONFIG_9P_FS=m # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set CONFIG_OSF_PARTITION=y CONFIG_AMIGA_PARTITION=y # CONFIG_ATARI_PARTITION is not set CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y # CONFIG_LDM_PARTITION is not set CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set CONFIG_SUN_PARTITION=y CONFIG_KARMA_PARTITION=y CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_CODEPAGE_1250=m CONFIG_NLS_CODEPAGE_1251=m CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_13=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m CONFIG_DLM=m CONFIG_DLM_DEBUG=y # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_DETECT_HUNG_TASK=y # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_VIRTUAL is not set # CONFIG_DEBUG_WRITECOUNT is not set CONFIG_DEBUG_MEMORY_INIT=y CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set CONFIG_ARCH_WANT_FRAME_POINTERS=y # CONFIG_FRAME_POINTER is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_FTRACE_SYSCALLS=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SYSPROF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_FTRACE_SYSCALLS is not set # CONFIG_BOOT_TRACER is not set CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_POWER_TRACER is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_MMIOTRACE is not set # CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set # CONFIG_BUILD_DOCSRC is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_HAVE_ARCH_KMEMCHECK=y # CONFIG_STRICT_DEVMEM is not set CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y # CONFIG_EARLY_PRINTK_DBGP is not set CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set # CONFIG_X86_PTDUMP is not set CONFIG_DEBUG_RODATA=y CONFIG_DEBUG_RODATA_TEST=y # CONFIG_DEBUG_NX_TEST is not set # CONFIG_IOMMU_DEBUG is not set # CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 # CONFIG_DEBUG_BOOT_PARAMS is not set # CONFIG_CPA_DEBUG is not set # CONFIG_OPTIMIZE_INLINING is not set # # Security options # CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y # CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_LSM_MMAP_MIN_ADDR=65536 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set # CONFIG_SECURITY_SMACK is not set # CONFIG_SECURITY_TOMOYO is not set # CONFIG_IMA is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m CONFIG_ASYNC_MEMCPY=m CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y # # Crypto core or helper # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_SEQIV is not set # # Block modes # CONFIG_CRYPTO_CBC=m # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_XTS is not set # # Hash modes # CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m # # Digest # CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_CRC32C_INTEL is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m # # Ciphers # CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_AES_X86_64=m # CONFIG_CRYPTO_AES_NI_INTEL is not set CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SALSA20_X86_64 is not set # CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_TWOFISH_X86_64=m # # Compression # CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_PADLOCK is not set # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=m CONFIG_KVM_INTEL=m CONFIG_KVM_AMD=m # CONFIG_KVM_TRACE is not set # CONFIG_VIRTIO_PCI is not set # CONFIG_VIRTIO_BALLOON is not set CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=m CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_GENERIC_ALLOCATOR=y CONFIG_REED_SOLOMON=m CONFIG_REED_SOLOMON_DEC16=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y CONFIG_NLATTR=y [-- Attachment #5: lspci.txt --] [-- Type: text/plain, Size: 32389 bytes --] 00:00.0 Host bridge: Intel Corporation Unknown device d132 (rev 11) Subsystem: Hewlett-Packard Company Unknown device 1520 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [40] #00 [0000] 00:03.0 PCI bridge: Intel Corporation Unknown device d138 (rev 11) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: d0000000-d2ffffff Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: [40] Subsystem: Hewlett-Packard Company Unknown device 1520 Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1 Enable+ Address: feeff00c Data: 4171 Masking: 00000002 Pending: 00000000 Capabilities: [90] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed unknown, Width x16, ASPM L0s L1, Port 3 Link: Latency L0s <512ns, L1 <4us Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x16 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 19, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd Off, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [e0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:08.0 System peripheral: Intel Corporation Unknown device d155 (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [40] Express Unknown type IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed unknown, Width x0, ASPM L0s, Port 0 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled CommClk- ExtSynch- Link: Speed unknown, Width x0 00:08.1 System peripheral: Intel Corporation Unknown device d156 (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [40] Express Unknown type IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed unknown, Width x0, ASPM L0s, Port 0 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled CommClk- ExtSynch- Link: Speed unknown, Width x0 00:08.2 System peripheral: Intel Corporation Unknown device d157 (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [40] Express Unknown type IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed unknown, Width x0, ASPM L0s, Port 0 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled CommClk- ExtSynch- Link: Speed unknown, Width x0 00:08.3 System peripheral: Intel Corporation Unknown device d158 (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:10.0 System peripheral: Intel Corporation Unknown device d150 (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:10.1 System peripheral: Intel Corporation Unknown device d151 (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:16.0 Communication controller: Intel Corporation Unknown device 3b64 (rev 06) Subsystem: Hewlett-Packard Company Unknown device 1520 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: Memory at d7424000 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 00:16.3 Serial controller: Intel Corporation Unknown device 3b67 (rev 06) (prog-if 02 [16550]) Subsystem: Hewlett-Packard Company Unknown device 1520 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 6050 [size=8] Region 1: Memory at d742b000 (32-bit, non-prefetchable) [size=4K] Capabilities: [c8] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 00:19.0 Ethernet controller: Intel Corporation Unknown device 10ea (rev 06) Subsystem: Hewlett-Packard Company Unknown device 1520 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 2297 Region 0: Memory at d7400000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at d742a000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 6020 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Address: 00000000fee8000c Data: 41c1 Capabilities: [e0] #13 [0306] 00:1a.0 USB Controller: Intel Corporation Unknown device 3b3c (rev 06) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Unknown device 1520 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d7429000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port Capabilities: [98] #13 [0306] 00:1b.0 Audio device: Intel Corporation Unknown device 3b56 (rev 06) Subsystem: Hewlett-Packard Company Unknown device 1520 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at d7420000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express Unknown type IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled CommClk- ExtSynch- Link: Speed unknown, Width x0 00:1c.0 PCI bridge: Intel Corporation Unknown device 3b42 (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: d7300000-d73fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1 Link: Latency L0s <1us, L1 <4us Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise+ Slot: Number 0, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: feeff00c Data: 4179 Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 1520 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1c.1 PCI bridge: Intel Corporation Unknown device 3b44 (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=43, sec-latency=0 I/O behind bridge: 00003000-00004fff Memory behind bridge: d3300000-d72fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 1, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: feeff00c Data: 4181 Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 1520 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1c.3 PCI bridge: Intel Corporation Unknown device 3b48 (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=44, subordinate=44, sec-latency=0 Memory behind bridge: d3200000-d32fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4 Link: Latency L0s <256ns, L1 <4us Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise+ Slot: Number 3, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: feeff00c Data: 4189 Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 1520 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1c.7 PCI bridge: Intel Corporation Unknown device 3b50 (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=45, subordinate=45, sec-latency=0 Memory behind bridge: d3100000-d31fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 8 Link: Latency L0s <256ns, L1 <4us Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise+ Slot: Number 7, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: feeff00c Data: 4191 Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 1520 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1d.0 USB Controller: Intel Corporation Unknown device 3b34 (rev 06) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Unknown device 1520 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at d7428000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ Capabilities: [58] Debug port Capabilities: [98] #13 [0306] 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=46, subordinate=4a, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: d3000000-d30fffff Prefetchable memory behind bridge: 00000000d8000000-00000000dbffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Subsystem: Hewlett-Packard Company Unknown device 1520 00:1f.0 ISA bridge: Intel Corporation Unknown device 3b07 (rev 06) Subsystem: Hewlett-Packard Company Unknown device 1520 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [e0] Vendor Specific Information 00:1f.2 SATA controller: Intel Corporation Unknown device 3b2f (rev 06) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Unknown device 1520 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 2298 Region 0: I/O ports at 6048 [size=8] Region 1: I/O ports at 605c [size=4] Region 2: I/O ports at 6040 [size=8] Region 3: I/O ports at 6058 [size=4] Region 4: I/O ports at 6000 [size=32] Region 5: Memory at d7427000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee3000c Data: 00a9 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] #12 [0010] Capabilities: [b0] #13 [0306] 01:00.0 VGA compatible controller: nVidia Corporation Unknown device 061f (rev a2) (prog-if 00 [VGA]) Subsystem: Hewlett-Packard Company Unknown device 1520 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at 5000 [size=128] Expansion ROM at <ignored> [disabled] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [78] Express Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <512ns, L1 <4us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 256 bytes Link: Supported Speed unknown, Width x16, ASPM L0s L1, Port 0 Link: Latency L0s <512ns, L1 <1us Link: ASPM L0s L1 Enabled RCB 128 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x16 44:00.0 Network controller: Intel Corporation Unknown device 4238 (rev 2c) Subsystem: Intel Corporation Unknown device 1111 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at d3200000 (64-bit, non-prefetchable) [size=8K] Capabilities: [c8] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [e0] Express Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 unlimited Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0 Link: Latency L0s <128ns, L1 <32us Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 45:00.0 USB Controller: NEC Corporation Unknown device 0194 (rev 03) (prog-if 30) Subsystem: Hewlett-Packard Company Unknown device 1520 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at d3100000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [90] MSI-X: Enable- Mask- TabSize=8 Vector table: BAR=0 offset=00001000 PBA: BAR=0 offset=00001080 Capabilities: [a0] Express Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed unknown, Width x1, ASPM L0s L1, Port 0 Link: Latency L0s <4us, L1 unlimited Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 46:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 06) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Unknown device 1520 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at d3001000 (32-bit, non-prefetchable) [size=2K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME+ 46:06.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 25) Subsystem: Hewlett-Packard Company Unknown device 1520 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 22 Region 0: Memory at d3005000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 46:06.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 14) Subsystem: Hewlett-Packard Company Unknown device 1520 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 11 Region 0: Memory at d3004000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 46:06.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 14) Subsystem: Hewlett-Packard Company Unknown device 1520 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 11 Region 0: Memory at d3003000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 46:06.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 14) Subsystem: Hewlett-Packard Company Unknown device 1520 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 11 Region 0: Memory at d3002000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 46:06.5 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev bb) Subsystem: Hewlett-Packard Company Unknown device 1520 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168 Interrupt: pin B routed to IRQ 22 Region 0: Memory at d3000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=46, secondary=47, subordinate=4a, sec-latency=176 Memory window 0: d8000000-dbfff000 (prefetchable) Memory window 1: dc000000-dffff000 I/O window 0: 00002000-000020ff I/O window 1: 00002400-000024ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 ff:00.0 Host bridge: Intel Corporation Unknown device 2c52 (rev 04) Subsystem: Intel Corporation Unknown device 8086 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 ff:00.1 Host bridge: Intel Corporation Unknown device 2c81 (rev 04) Subsystem: Intel Corporation Unknown device 8086 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 ff:02.0 Host bridge: Intel Corporation Unknown device 2c90 (rev 04) Subsystem: Intel Corporation Unknown device 8086 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 ff:02.1 Host bridge: Intel Corporation Unknown device 2c91 (rev 04) Subsystem: Intel Corporation Unknown device 8086 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 ff:03.0 Host bridge: Intel Corporation Unknown device 2c98 (rev 04) Subsystem: Intel Corporation Unknown device 8086 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 ff:03.1 Host bridge: Intel Corporation Unknown device 2c99 (rev 04) Subsystem: Intel Corporation Unknown device 8086 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 ff:03.4 Host bridge: Intel Corporation Unknown device 2c9c (rev 04) Subsystem: Intel Corporation Unknown device 8086 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 ff:04.0 Host bridge: Intel Corporation Unknown device 2ca0 (rev 04) Subsystem: Intel Corporation Unknown device 8086 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 ff:04.1 Host bridge: Intel Corporation Unknown device 2ca1 (rev 04) Subsystem: Intel Corporation Unknown device 8086 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 ff:04.2 Host bridge: Intel Corporation Unknown device 2ca2 (rev 04) Subsystem: Intel Corporation Unknown device 8086 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 ff:04.3 Host bridge: Intel Corporation Unknown device 2ca3 (rev 04) Subsystem: Intel Corporation Unknown device 8086 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 ff:05.0 Host bridge: Intel Corporation Unknown device 2ca8 (rev 04) Subsystem: Intel Corporation Unknown device 8086 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 ff:05.1 Host bridge: Intel Corporation Unknown device 2ca9 (rev 04) Subsystem: Intel Corporation Unknown device 8086 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 ff:05.2 Host bridge: Intel Corporation Unknown device 2caa (rev 04) Subsystem: Intel Corporation Unknown device 8086 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 ff:05.3 Host bridge: Intel Corporation Unknown device 2cab (rev 04) Subsystem: Intel Corporation Unknown device 8086 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 [-- Attachment #6: dmidecode.txt --] [-- Type: text/plain, Size: 9259 bytes --] # dmidecode 2.7 SMBIOS 2.6 present. 27 structures occupying 1301 bytes. Table at 0xBBE03000. Handle 0x000C, DMI type 0, 24 bytes. BIOS Information Vendor: Hewlett-Packard Version: 68CAD Ver. F.02 Release Date: 03/05/2010 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 3072 kB Characteristics: PCI is supported PC Card (PCMCIA) is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported EDD is supported Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) ACPI is supported USB legacy is supported Smart battery is supported BIOS boot specification is supported Function key-initiated network boot is supported Targeted content distribution is supported BIOS Revision: 15.2 Firmware Revision: 33.37 Handle 0x000D, DMI type 1, 27 bytes. System Information Manufacturer: Hewlett-Packard Product Name: HP EliteBook 8740w Version: Armani Serial Number: 1234567890 UUID: 9921DE3A-5C1A-DF11-9078-563412000026 Wake-up Type: Power Switch SKU Number: 123456#AB5 Family: 103C_5336AN Handle 0x000E, DMI type 2, 16 bytes. Base Board Information Manufacturer: Hewlett-Packard Product Name: 1520 Version: KBC Version 33.2A Serial Number: 1234567890 Asset Tag: Not Specified Features: Board is a hosting board Board is replaceable Location In Chassis: Chassis Handle: 0x000F Type: Unknown Contained Object Handles: 0 Handle 0x000F, DMI type 3, 17 bytes. Chassis Information Manufacturer: Hewlett-Packard Type: Notebook Lock: Not Present Version: Not Specified Serial Number: 1234567890 Asset Tag: Boot-up State: Safe Power Supply State: Safe Thermal State: Other Security Status: Other OEM Information: 0x00000000 Handle 0x0000, DMI type 4, 42 bytes. Processor Information Socket Designation: CPU 1 Type: Central Processor Family: Pentium M Manufacturer: Intel(R) Corporation ID: E5 06 01 00 FF FB EB BF Signature: Type 0, Family 6, Model 30, Stepping 5 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Hyper-threading technology) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz Voltage: 1.2 V External Clock: 133 MHz Max Speed: 1733 MHz Current Speed: 1731 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x0002 L2 Cache Handle: 0x0003 L3 Cache Handle: 0x0001 Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0001, DMI type 7, 19 bytes. Cache Information Socket Designation: Unknown Configuration: Enabled, Not Socketed, Level 3 Operational Mode: Write Back Location: Internal Installed Size: 8192 KB Maximum Size: 8192 KB Supported SRAM Types: Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 16-way Set-associative Handle 0x0003, DMI type 7, 19 bytes. Cache Information Socket Designation: Unknown Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 256 KB Maximum Size: 256 KB Supported SRAM Types: Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 8-way Set-associative Handle 0x0002, DMI type 7, 19 bytes. Cache Information Socket Designation: Unknown Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 KB Maximum Size: 32 KB Supported SRAM Types: Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Data Associativity: 8-way Set-associative Handle 0x0014, DMI type 9, 13 bytes. System Slot Information Designation: PCI SLOT1 Type: 32-bit PCI Current Usage: Available Length: Long ID: 1 Characteristics: 3.3 V is provided PME signal is supported SMBus signal is supported Handle 0x0013, DMI type 11, 5 bytes. OEM Strings String 1: ABS 70/71 79 7A 7B 7C String 2: CSM v01.44 String 3: HP_Mute_LED_0 String 4: www.hp.com Handle 0x0019, DMI type 13, 22 bytes. BIOS Language Information Installable Languages: 12 enUS daDK nlNL fiFI frFR deDE itIT jaJP noNO ptPT esES svSE Currently Installed Language: enUS Handle 0x0004, DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 16 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x0005, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0004 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: SODIMM Set: None Locator: Bottom-Slot 1(left) Bank Locator: BANK 0 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 1333 MHz (0.8 ns) Manufacturer: Samsung Serial Number: 633C04B0 Asset Tag: Unknown Part Number: M471B5673EH1-CH9 Handle 0x000A, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0004 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: Bottom-Slot 2(right) Bank Locator: BANK 3 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Unknown Part Number: Not Specified Handle 0x0008, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0004 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: SODIMM Set: None Locator: Top-Slot 1(top) Bank Locator: BANK 2 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 1333 MHz (0.8 ns) Manufacturer: Samsung Serial Number: 0610ED55 Asset Tag: Unknown Part Number: M471B5273BH1-CH9 Handle 0x0007, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0004 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: Top-Slot 2(under) Bank Locator: BANK 1 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Unknown Part Number: Not Specified Handle 0x000B, DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0017FFFFFFF Range Size: 6 GB Physical Array Handle: 0x0004 Partition Width: 0 Handle 0x0006, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x0005 Memory Array Mapped Address Handle: 0x000B Partition Row Position: 1 Interleave Position: 1 Interleaved Data Depth: 1 Handle 0x0009, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000FFFFFFFF Range Size: 4 GB Physical Device Handle: 0x0008 Memory Array Mapped Address Handle: 0x000B Partition Row Position: 1 Interleave Position: 2 Interleaved Data Depth: 1 Handle 0x0015, DMI type 22, 26 bytes. Portable Battery Location: Primary Manufacturer: 31LGLGC Name: AV08068 Design Capacity: 4720 mWh Design Voltage: 14400 mV SBDS Version: 1.1 Maximum Error: Unknown SBDS Serial Number: 000F SBDS Manufacture Date: 2009-11-12 SBDS Chemistry: LION OEM-specific Information: 0x00000000 Handle 0x0010, DMI type 32, 20 bytes. System Boot Information Status: No errors detected Handle 0x0011, DMI type 41, 11 bytes. Unknown Type Header and Data: 29 0B 11 00 01 83 01 00 00 01 00 Strings: 0 Handle 0x0012, DMI type 41, 11 bytes. Unknown Type Header and Data: 29 0B 12 00 02 85 01 00 00 44 00 Strings: WLAN WLAN Handle 0x0016, DMI type 129, 8 bytes. OEM-specific Type Header and Data: 81 08 16 00 01 01 02 01 Strings: Intel_ASF Intel_ASF_001 Handle 0x0017, DMI type 130, 20 bytes. OEM-specific Type Header and Data: 82 14 17 00 24 41 4D 54 01 01 01 01 01 A5 8B 02 00 00 01 00 Handle 0x0018, DMI type 131, 64 bytes. OEM-specific Type Header and Data: 83 40 18 00 3F 00 00 00 00 00 00 00 00 00 00 00 F8 00 07 3B 00 00 00 00 09 A0 00 00 00 00 06 00 AB 04 03 00 00 00 00 00 C8 00 EA 10 00 00 00 00 32 D1 00 00 36 00 00 00 76 50 72 6F 00 00 00 00 Handle 0xFFFD, DMI type 127, 4 bytes. End Of Table [-- Attachment #7: grub.conf --] [-- Type: application/octet-stream, Size: 1156 bytes --] # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) # kernel /vmlinuz-version ro root=/dev/sda5 # initrd /initrd-version.img #boot=/dev/sda default=2 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz title Fedora (2.6.23.1-42.fc8) root (hd0,0) kernel /vmlinuz-2.6.23.1-42.fc8 ro root=LABEL=/1 rhgb initrd /initrd-2.6.23.1-42.fc8.img title Fedora XEN 4.0 (2.6.31.13-xen) root (hd0,0) kernel /xen-4.0.gz iommu=required loglvl=all guest_loglvl=all com1=115200,8n1 console=com1 module /vmlinuz-2.6.31.13-xen ro root=LABEL=/1 console=tty0 console=ttyS0,115200,8n1 module /initrd-2.6.31.13-xen.img title Fedora XEN 4.0 (2.6.31.13-xen) root (hd0,0) kernel /xen-4.0.gz acpi=off module /vmlinuz-2.6.31.13-xen ro root=LABEL=/1 rhgb module /initrd-2.6.31.13-xen.img title Fedora (2.6.23.1-42.fc8) root (hd0,0) kernel /vmlinuz-2.6.31.13-xen ro root=LABEL=/1 rhgb initrd /initrd-2.6.31.13-xen.img [-- Attachment #8: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot 2010-07-02 15:19 ` Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot ktckd @ 2010-07-06 14:15 ` Konrad Rzeszutek Wilk 2010-07-07 16:59 ` ktckd 0 siblings, 1 reply; 8+ messages in thread From: Konrad Rzeszutek Wilk @ 2010-07-06 14:15 UTC (permalink / raw) To: ktckd; +Cc: xen-devel On Fri, Jul 02, 2010 at 10:19:02AM -0500, ktckd wrote: > ---------- Forwarded message ---------- > From: ktckd <ktckd9@gmail.com> > Date: Wed, Jun 30, 2010 at 4:49 PM > Subject: Re: Xen4.0/FC8/Linux-2.6.31.13 hang on boot > To: xen-users@lists.xensource.com > > > Rebuilt Xen4.0 with linux-2.6.18 and have seen no problems during boot. So > is it the linux kernel that caused the problem? Then why don't I see any > problem when I try the 4th grub entry? We need more than just the screenshots. You need to add these options to your Linux kernel line: "console=hvc0 debug initcall_debug" so that we can see where it happens. Also on the Xen line add 'sync_console console_to_ring'. > > > ---------- Forwarded message ---------- > From: ktckd <ktckd9@gmail.com> > Date: Mon, Jun 28, 2010 at 1:23 PM > Subject: Xen4.0/FC8/Linux-2.6.31.13 hang on boot > To: xen-users@lists.xensource.com > > > Hi list, > > I am seeing an issue on my notebook with Xen4.0/FC8/Linux-2.6.31.13. The > unit has nVidia graphics and basically hangs at the point shown in the > image. Not sure where I might be going wrong. Would appreciate if anyone can > point me in some direction. The unit has no problem booting into 3rd > (acpi=off) and 4th boot entry. I remember xen3.4.0 worked fine the last time > I tried it on this unit. Was that with the 2.6.31.13 kernel? Or did you use another kernel at that time? ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot 2010-07-06 14:15 ` Konrad Rzeszutek Wilk @ 2010-07-07 16:59 ` ktckd 2010-07-13 15:06 ` Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot - global_irq != irq for INT_SRC_OVR Konrad Rzeszutek Wilk 2010-07-13 18:22 ` Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot ktckd 0 siblings, 2 replies; 8+ messages in thread From: ktckd @ 2010-07-07 16:59 UTC (permalink / raw) To: Konrad Rzeszutek Wilk; +Cc: xen-devel [-- Attachment #1.1: Type: text/plain, Size: 1717 bytes --] Attaching the serial with the grub options mentioned below. Do let me know if you need any other information. I was using 2.6.18.8 when I tried xen 3.4.0 On Tue, Jul 6, 2010 at 9:15 AM, Konrad Rzeszutek Wilk < konrad.wilk@oracle.com> wrote: > On Fri, Jul 02, 2010 at 10:19:02AM -0500, ktckd wrote: > > ---------- Forwarded message ---------- > > From: ktckd <ktckd9@gmail.com> > > Date: Wed, Jun 30, 2010 at 4:49 PM > > Subject: Re: Xen4.0/FC8/Linux-2.6.31.13 hang on boot > > To: xen-users@lists.xensource.com > > > > > > Rebuilt Xen4.0 with linux-2.6.18 and have seen no problems during boot. > So > > is it the linux kernel that caused the problem? Then why don't I see any > > problem when I try the 4th grub entry? > > We need more than just the screenshots. You need to add these options to > your Linux kernel line: "console=hvc0 debug initcall_debug" so that we > can see where it happens. > > Also on the Xen line add 'sync_console console_to_ring'. > > > > > > > ---------- Forwarded message ---------- > > From: ktckd <ktckd9@gmail.com> > > Date: Mon, Jun 28, 2010 at 1:23 PM > > Subject: Xen4.0/FC8/Linux-2.6.31.13 hang on boot > > To: xen-users@lists.xensource.com > > > > > > Hi list, > > > > I am seeing an issue on my notebook with Xen4.0/FC8/Linux-2.6.31.13. The > > unit has nVidia graphics and basically hangs at the point shown in the > > image. Not sure where I might be going wrong. Would appreciate if anyone > can > > point me in some direction. The unit has no problem booting into 3rd > > (acpi=off) and 4th boot entry. I remember xen3.4.0 worked fine the last > time > > I tried it on this unit. > > Was that with the 2.6.31.13 kernel? Or did you use another kernel at > that time? > > [-- Attachment #1.2: Type: text/html, Size: 2442 bytes --] [-- Attachment #2: Serial2.TXT --] [-- Type: text/plain, Size: 62008 bytes --] __ __ _ _ ___ ___ \ \/ /___ _ __ | || | / _ \ / _ \ \ // _ \ '_ \ | || |_| | | | | | | / \ __/ | | | |__ _| |_| | |_| | /_/\_\___|_| |_| |_|(_)___(_)___/ (XEN) Xen version 4.0.0 (root@localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) Wed Jun 30 16:31:17 CDT 2010 (XEN) Latest ChangeSet: unavailable (XEN) Command line: iommu=required loglvl=all guest_loglvl=all com1=115200,8n1 console=com1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000ef000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000bbdd4000 (usable) (XEN) 00000000bbdd4000 - 00000000bbec2000 (reserved) (XEN) 00000000bbec2000 - 00000000bbfc2000 (ACPI NVS) (XEN) 00000000bbfc2000 - 00000000bbfff000 (ACPI data) (XEN) 00000000bbfff000 - 00000000bc000000 (usable) (XEN) 00000000bc000000 - 00000000c0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 00000000fec01000 (reserved) (XEN) 00000000fed10000 - 00000000fed14000 (reserved) (XEN) 00000000fed19000 - 00000000fed1a000 (reserved) (XEN) 00000000fed1b000 - 00000000fed20000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffd00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 00000001c0000000 (usable) (XEN) ACPI: RSDP 000F2AE0, 0024 (r2 HPQOEM) (XEN) ACPI: XSDT BBFFE120, 0094 (r1 HPQOEM SLIC-MPC F 1000013) (XEN) ACPI: FACP BBFFC000, 00F4 (r3 HPQOEM 1520 F HP 1) (XEN) ACPI: DSDT BBFDB000, 1BCEC (r2 HPQOEM 1520 1 INTL 20060912) (XEN) ACPI: FACS BBF41000, 0040 (XEN) ACPI: HPET BBFFB000, 0038 (r1 HPQOEM 1520 1 HP 1) (XEN) ACPI: APIC BBFFA000, 00BC (r1 HPQOEM 1520 1 HP 1) (XEN) ACPI: MCFG BBFF9000, 003C (r1 HPQOEM 1520 1 HP 1) (XEN) ACPI: TCPA BBFF7000, 0032 (r2 HPQOEM 1520 0 HP 1) (XEN) ACPI: SSDT BBFD8000, 0135 (r1 HPQOEM SataAhci 1000 INTL 20060912) (XEN) ACPI: SSDT BBFD7000, 0314 (r1 HPQOEM PtidDevc 1000 INTL 20060912) (XEN) ACPI: SLIC BBFD6000, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) (XEN) ACPI: SSDT BBFD2000, 2566 (r1 HPQOEM NVIDIAGF 1 INTL 20060912) (XEN) ACPI: DMAR BBFD1000, 0068 (r1 INTEL CP_FIELD 1 INTL 1) (XEN) ACPI: SSDT BBFD0000, 0A10 (r1 PmRef CpuPm 3000 INTL 20060912) (XEN) ACPI: SSDT BBFCF000, 0288 (r1 PmRef Cpu0Tst 3000 INTL 20060912) (XEN) ACPI: SSDT BBFCE000, 0225 (r1 PmRef ApTst 3000 INTL 20060912) (XEN) ACPI: ASF! BBFF8000, 00A0 (r32 HPQOEM 1520 1 HP 1) (XEN) System RAM: 6050MB (6196088kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-00000001c0000000 (XEN) Domain heap initialised (XEN) DMI 2.6 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x408 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0] (XEN) ACPI: wakeup_vec[bbf4100c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) (XEN) Processor #1 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) (XEN) Processor #2 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) (XEN) Processor #3 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) (XEN) Processor #4 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) (XEN) Processor #5 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) (XEN) Processor #6 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) (XEN) Processor #7 7:14 APIC version 21 (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000 (XEN) [VT-D]dmar.c:504: RMRR address range not in reserved memory base = 0 end = fff; iommu_inclusive_mapping=1 parameter may be needed. (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 1729.025 MHz processor. (XEN) Initing memory sharing. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs enabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging detected. (XEN) Intel machine check reporting enabled (XEN) Intel VT-d Snoop Control supported. (XEN) Intel VT-d DMA Passthrough not supported. (XEN) Intel VT-d Queued Invalidation supported. (XEN) Intel VT-d Interrupt Remapping not supported. (XEN) I/O virtualisation enabled (XEN) I/O virtualisation for PV guests disabled (XEN) Total of 8 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) TSC is reliable, synchronization unnecessary (XEN) Platform timer is 14.318MHz HPET ÿ(XEN) Allocated console ring of 64 KiB. (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) microcode.c:73:d32767 microcode: CPU2 resumed (XEN) microcode.c:73:d32767 microcode: CPU3 resumed (XEN) microcode.c:73:d32767 microcode: CPU4 resumed (XEN) microcode.c:73:d32767 microcode: CPU5 resumed (XEN) microcode.c:73:d32767 microcode: CPU6 resumed (XEN) Brought up 8 CPUs (XEN) microcode.c:73:d32767 microcode: CPU7 resumed (XEN) Turbo Mode detected! (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1884000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 00000001b4000000->00000001b8000000 (1484563 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81884000 (XEN) Init. ramdisk: ffffffff81884000->ffffffff82051400 (XEN) Phys-Mach map: ffffffff82052000->ffffffff82bc5898 (XEN) Start info: ffffffff82bc6000->ffffffff82bc64b4 (XEN) Page tables: ffffffff82bc7000->ffffffff82be2000 (XEN) Boot stack: ffffffff82be2000->ffffffff82be3000 (XEN) TOTAL: ffffffff80000000->ffffffff83000000 (XEN) ENTRY ADDRESS: ffffffff81666de0 (XEN) Dom0 has maximum 8 VCPUs (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 156kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... (XEN) io_apic.c:2290: (XEN) ioapic_guest_write: apic=0, pin=2, irq=0 (XEN) ioapic_guest_write: new_entry=000109f0 (XEN) ioapic_guest_write: old_entry=000009f0 pirq=0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) irq.c:1445: dom0: pirq 0 or irq 3 already mapped (XEN) io_apic.c:2290: (XEN) ioapic_guest_write: apic=0, pin=4, irq=4 (XEN) ioapic_guest_write: new_entry=000109f1 (XEN) ioapic_guest_write: old_entry=000009f1 pirq=0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) irq.c:1445: dom0: pirq 0 or irq 5 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 6 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 7 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 8 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 9 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 10 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 11 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 12 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 13 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 14 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 15 already mapped (XEN) allocated vector 21 for irq 16 (XEN) irq.c:1445: dom0: pirq 0 or irq 16 already mapped (XEN) allocated vector 29 for irq 21 (XEN) irq.c:1445: dom0: pirq 0 or irq 21 already mapped (XEN) allocated vector 31 for irq 22 (XEN) irq.c:1445: dom0: pirq 0 or irq 22 already mapped (XEN) allocated vector 39 for irq 23 (XEN) irq.c:1445: dom0: pirq 0 or irq 23 already mapped (XEN) io_apic.c:2290: (XEN) ioapic_guest_write: apic=0, pin=0, irq=0 (XEN) ioapic_guest_write: new_entry=000009f0 (XEN) ioapic_guest_write: old_entry=00010260 pirq=0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! ^[[0m^[[37m^[[40m^[[2J^[[01;01H^[[=3h^[[2J^[[01;01H^[[2J^[[01;01H^[[=3h^[[2J^[[01;01H __ __ _ _ ___ ___ \ \/ /___ _ __ | || | / _ \ / _ \ \ // _ \ '_ \ | || |_| | | | | | | / \ __/ | | | |__ _| |_| | |_| | /_/\_\___|_| |_| |_|(_)___(_)___/ (XEN) Xen version 4.0.0 (root@localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) Wed Jun 30 16:31:17 CDT 2010 (XEN) Latest ChangeSet: unavailable (XEN) Console output is synchronous. (XEN) Command line: iommu=required loglvl=all guest_loglvl=all sync_console console_to_ring com1=115200,8n1 console=com1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000ef000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000bbdd4000 (usable) (XEN) 00000000bbdd4000 - 00000000bbec2000 (reserved) (XEN) 00000000bbec2000 - 00000000bbfc2000 (ACPI NVS) (XEN) 00000000bbfc2000 - 00000000bbfff000 (ACPI data) (XEN) 00000000bbfff000 - 00000000bc000000 (usable) (XEN) 00000000bc000000 - 00000000c0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 00000000fec01000 (reserved) (XEN) 00000000fed10000 - 00000000fed14000 (reserved) (XEN) 00000000fed19000 - 00000000fed1a000 (reserved) (XEN) 00000000fed1b000 - 00000000fed20000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffd00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 00000001c0000000 (usable) (XEN) ACPI: RSDP 000F2AE0, 0024 (r2 HPQOEM) (XEN) ACPI: XSDT BBFFE120, 0094 (r1 HPQOEM SLIC-MPC F 1000013) (XEN) ACPI: FACP BBFFC000, 00F4 (r3 HPQOEM 1520 F HP 1) (XEN) ACPI: DSDT BBFDB000, 1BCEC (r2 HPQOEM 1520 1 INTL 20060912) (XEN) ACPI: FACS BBF41000, 0040 (XEN) ACPI: HPET BBFFB000, 0038 (r1 HPQOEM 1520 1 HP 1) (XEN) ACPI: APIC BBFFA000, 00BC (r1 HPQOEM 1520 1 HP 1) (XEN) ACPI: MCFG BBFF9000, 003C (r1 HPQOEM 1520 1 HP 1) (XEN) ACPI: TCPA BBFF7000, 0032 (r2 HPQOEM 1520 0 HP 1) (XEN) ACPI: SSDT BBFD8000, 0135 (r1 HPQOEM SataAhci 1000 INTL 20060912) (XEN) ACPI: SSDT BBFD7000, 0314 (r1 HPQOEM PtidDevc 1000 INTL 20060912) (XEN) ACPI: SLIC BBFD6000, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) (XEN) ACPI: SSDT BBFD2000, 2566 (r1 HPQOEM NVIDIAGF 1 INTL 20060912) (XEN) ACPI: DMAR BBFD1000, 0068 (r1 INTEL CP_FIELD 1 INTL 1) (XEN) ACPI: SSDT BBFD0000, 0A10 (r1 PmRef CpuPm 3000 INTL 20060912) (XEN) ACPI: SSDT BBFCF000, 0288 (r1 PmRef Cpu0Tst 3000 INTL 20060912) (XEN) ACPI: SSDT BBFCE000, 0225 (r1 PmRef ApTst 3000 INTL 20060912) (XEN) ACPI: ASF! BBFF8000, 00A0 (r32 HPQOEM 1520 1 HP 1) (XEN) System RAM: 6050MB (6196088kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-00000001c0000000 (XEN) Domain heap initialised (XEN) DMI 2.6 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x408 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0] (XEN) ACPI: wakeup_vec[bbf4100c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) (XEN) Processor #1 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) (XEN) Processor #2 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) (XEN) Processor #3 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) (XEN) Processor #4 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) (XEN) Processor #5 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) (XEN) Processor #6 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) (XEN) Processor #7 7:14 APIC version 21 (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000 (XEN) [VT-D]dmar.c:504: RMRR address range not in reserved memory base = 0 end = fff; iommu_inclusive_mapping=1 parameter may be needed. (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 1729.042 MHz processor. (XEN) Initing memory sharing. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs enabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging detected. (XEN) Intel machine check reporting enabled (XEN) Intel VT-d Snoop Control supported. (XEN) Intel VT-d DMA Passthrough not supported. (XEN) Intel VT-d Queued Invalidation supported. (XEN) Intel VT-d Interrupt Remapping not supported. (XEN) I/O virtualisation enabled (XEN) I/O virtualisation for PV guests disabled (XEN) Total of 8 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) TSC is reliable, synchronization unnecessary (XEN) Platform timer is 14.318MHz HPET ÿ(XEN) Allocated console ring of 64 KiB. (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) microcode.c:73:d32767 microcode: CPU6 resumed (XEN) microcode.c:73:d32767 microcode: CPU4 resumed (XEN) Brought up 8 CPUs (XEN) microcode.c:73:d32767 microcode: CPU3 resumed (XEN) microcode.c:73:d32767 microcode: CPU5 resumed (XEN) microcode.c:73:d32767 microcode: CPU2 resumed (XEN) microcode.c:73:d32767 microcode: CPU7 resumed (XEN) Turbo Mode detected! (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1884000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 00000001b4000000->00000001b8000000 (1484563 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81884000 (XEN) Init. ramdisk: ffffffff81884000->ffffffff82051400 (XEN) Phys-Mach map: ffffffff82052000->ffffffff82bc5898 (XEN) Start info: ffffffff82bc6000->ffffffff82bc64b4 (XEN) Page tables: ffffffff82bc7000->ffffffff82be2000 (XEN) Boot stack: ffffffff82be2000->ffffffff82be3000 (XEN) TOTAL: ffffffff80000000->ffffffff83000000 (XEN) ENTRY ADDRESS: ffffffff81666de0 (XEN) Dom0 has maximum 8 VCPUs (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) ********************************************** (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS (XEN) ******* This option is intended to aid debugging of Xen by ensuring (XEN) ******* that all output is synchronously delivered on the serial line. (XEN) ******* However it can introduce SIGNIFICANT latencies and affect (XEN) ******* timekeeping. It is NOT recommended for production use! (XEN) ********************************************** (XEN) 3... 2... 1... (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 156kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... (XEN) io_apic.c:2290: (XEN) ioapic_guest_write: apic=0, pin=2, irq=0 (XEN) ioapic_guest_write: new_entry=000109f0 (XEN) ioapic_guest_write: old_entry=000009f0 pirq=0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) irq.c:1445: dom0: pirq 0 or irq 3 already mapped (XEN) io_apic.c:2290: (XEN) ioapic_guest_write: apic=0, pin=4, irq=4 (XEN) ioapic_guest_write: new_entry=000109f1 (XEN) ioapic_guest_write: old_entry=000009f1 pirq=0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) irq.c:1445: dom0: pirq 0 or irq 5 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 6 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 7 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 8 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 9 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 10 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 11 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 12 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 13 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 14 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 15 already mapped (XEN) allocated vector 21 for irq 16 (XEN) irq.c:1445: dom0: pirq 0 or irq 16 already mapped (XEN) allocated vector 29 for irq 17 (XEN) irq.c:1445: dom0: pirq 0 or irq 17 already mapped (XEN) allocated vector 31 for irq 19 (XEN) irq.c:1445: dom0: pirq 0 or irq 19 already mapped (XEN) allocated vector 39 for irq 20 (XEN) irq.c:1445: dom0: pirq 0 or irq 20 already mapped (XEN) allocated vector 41 for irq 21 (XEN) irq.c:1445: dom0: pirq 0 or irq 21 already mapped (XEN) allocated vector 49 for irq 22 (XEN) irq.c:1445: dom0: pirq 0 or irq 22 already mapped (XEN) allocated vector 51 for irq 23 (XEN) irq.c:1445: dom0: pirq 0 or irq 23 already mapped (XEN) io_apic.c:2290: (XEN) ioapic_guest_write: apic=0, pin=0, irq=0 (XEN) ioapic_guest_write: new_entry=000009f0 (XEN) ioapic_guest_write: old_entry=00010260 pirq=0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! Linux version 2.6.31.13-xen (root@localhost.localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Wed Jul 7 11:17:17 CDT 2010 Command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed xen_release_chunk: looking at area pfn f0000-fec00: 60416 pages freed xen_release_chunk: looking at area pfn fec01-fed10: 271 pages freed xen_release_chunk: looking at area pfn fed14-fed19: 5 pages freed xen_release_chunk: looking at area pfn fed1a-fed1b: 1 pages freed xen_release_chunk: looking at area pfn fed20-fee00: 224 pages freed xen_release_chunk: looking at area pfn fee01-ffd00: 3839 pages freed released 195828 pages of unused memory BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009fc00 (usable) Xen: 000000000009fc00 - 0000000000100000 (reserved) Xen: 0000000000100000 - 00000000bbdd4000 (usable) Xen: 00000000bbdd4000 - 00000000bbec2000 (reserved) Xen: 00000000bbec2000 - 00000000bbfc2000 (ACPI NVS) Xen: 00000000bbfc2000 - 00000000bbfff000 (ACPI data) Xen: 00000000bbfff000 - 00000000bc000000 (usable) Xen: 00000000bc000000 - 00000000c0000000 (reserved) Xen: 00000000e0000000 - 00000000f0000000 (reserved) Xen: 00000000fec00000 - 00000000fec01000 (reserved) Xen: 00000000fed10000 - 00000000fed14000 (reserved) Xen: 00000000fed19000 - 00000000fed1a000 (reserved) Xen: 00000000fed1b000 - 00000000fed20000 (reserved) Xen: 00000000fee00000 - 00000000fee01000 (reserved) Xen: 00000000ffd00000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 000000016e713000 (usable) DMI 2.6 present. last_pfn = 0x16e713 max_arch_pfn = 0x400000000 last_pfn = 0xbc000 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bc000000 0000000000 - 00bc000000 page 4k kernel direct mapping tables up to bc000000 @ 100000-6e4000 init_memory_mapping: 0000000100000000-000000016e713000 0100000000 - 016e713000 page 4k kernel direct mapping tables up to 16e713000 @ 2be2000-375d000 RAMDISK: 01884000 - 02051400 ACPI: RSDP 00000000000f2ae0 00024 (v02 HPQOEM) ACPI: XSDT 00000000bbffe120 00094 (v01 HPQOEM SLIC-MPC 0000000F 01000013) ACPI: FACP 00000000bbffc000 000F4 (v03 HPQOEM 1520 0000000F HP 00000001) ACPI: DSDT 00000000bbfdb000 1BCEC (v02 HPQOEM 1520 00000001 INTL 20060912) ACPI: FACS 00000000bbf41000 00040 ACPI: HPET 00000000bbffb000 00038 (v01 HPQOEM 1520 00000001 HP 00000001) ACPI: APIC 00000000bbffa000 000BC (v01 HPQOEM 1520 00000001 HP 00000001) ACPI: MCFG 00000000bbff9000 0003C (v01 HPQOEM 1520 00000001 HP 00000001) ACPI: TCPA 00000000bbff7000 00032 (v02 HPQOEM 1520 00000000 HP 00000001) ACPI: SSDT 00000000bbfd8000 00135 (v01 HPQOEM SataAhci 00001000 INTL 20060912) ACPI: SSDT 00000000bbfd7000 00314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912) ACPI: SLIC 00000000bbfd6000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: SSDT 00000000bbfd2000 02566 (v01 HPQOEM NVIDIAGF 00000001 INTL 20060912) ACPI: 00000000bbfd1000 00068 (v01 INTEL CP_FIELD 00000001 INTL 00000001) ACPI: SSDT 00000000bbfd0000 00A10 (v01 PmRef CpuPm 00003000 INTL 20060912) ACPI: SSDT 00000000bbfcf000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912) ACPI: SSDT 00000000bbfce000 00225 (v01 PmRef ApTst 00003000 INTL 20060912) ACPI: ASF! 00000000bbff8000 000A0 (v32 HPQOEM 1520 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000016e713000 Bootmem setup node 0 0000000000000000-000000016e713000 NODE_DATA [0000000000001000 - 0000000000005fff] bootmap [0000000000008000 - 0000000000035ce7] pages 2e (9 early reservations) ==> bootmem [0000000000 - 016e713000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0002bc7000 - 0002be2000] XEN PAGETABLES ==> [0002bc7000 - 0002be2000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #3 [0001000000 - 0001863170] TEXT DATA BSS ==> [0001000000 - 0001863170] #4 [0001884000 - 0002051400] RAMDISK ==> [0001884000 - 0002051400] #5 [0002052000 - 0002bc7000] XEN START INFO ==> [0002052000 - 0002bc7000] #6 [0001864000 - 0001864229] BRK ==> [0001864000 - 0001864229] #7 [0000100000 - 00006c6000] PGTABLE ==> [0000100000 - 00006c6000] #8 [0002be2000 - 0002f58000] PGTABLE ==> [0002be2000 - 0002f58000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0016e713 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bbdd4 0: 0x000bbfff -> 0x000bc000 0: 0x00100000 -> 0x0016e713 On node 0 totalpages: 1221767 DMA zone: 56 pages used for memmap DMA zone: 1481 pages reserved DMA zone: 2462 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 751117 pages, LIFO batch:31 Normal zone: 6185 pages used for memmap Normal zone: 446186 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 00000000bbdd4000 - 00000000bbec2000 PM: Registered nosave memory: 00000000bbec2000 - 00000000bbfc2000 PM: Registered nosave memory: 00000000bbfc2000 - 00000000bbfff000 PM: Registered nosave memory: 00000000bc000000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 PM: Registered nosave memory: 00000000fed14000 - 00000000fed19000 PM: Registered nosave memory: 00000000fed19000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000 PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffd00000 PM: Registered nosave memory: 00000000ffd00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Allocated 22 4k pages, static data 89056 bytes trying to map vcpu_info 0 at ffffc9000000b020, mfn 192dc2, offset 32 cpu 0 using vcpu_info at ffffc9000000b020 trying to map vcpu_info 1 at ffffc90000023020, mfn 192dd8, offset 32 cpu 1 using vcpu_info at ffffc90000023020 trying to map vcpu_info 2 at ffffc9000003b020, mfn 192dee, offset 32 cpu 2 using vcpu_info at ffffc9000003b020 trying to map vcpu_info 3 at ffffc90000053020, mfn 192a04, offset 32 cpu 3 using vcpu_info at ffffc90000053020 trying to map vcpu_info 4 at ffffc9000006b020, mfn 192a1a, offset 32 cpu 4 using vcpu_info at ffffc9000006b020 trying to map vcpu_info 5 at ffffc90000083020, mfn 192a30, offset 32 cpu 5 using vcpu_info at ffffc90000083020 trying to map vcpu_info 6 at ffffc9000009b020, mfn 192a46, offset 32 cpu 6 using vcpu_info at ffffc9000009b020 trying to map vcpu_info 7 at ffffc900000b3020, mfn 192a5c, offset 32 cpu 7 using vcpu_info at ffffc900000b3020 Xen: using vcpu_info placement Built 1 zonelists in Node order, mobility grouping on. Total pages: 1199765 Policy zone: Normal Kernel command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1 PID hash table entries: 4096 (order: 12, 32768 bytes) Initializing CPU#0 PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB) xen_swiotlb_fixup: buf=ffff880020000000 size=67108864 xen_swiotlb_fixup: buf=ffff880024060000 size=32768 Placing 64MB Xen software IO TLB between ffff880020000000 - ffff880024000000 Xen software IO TLB at phys 0x20000000 - 0x24000000 Memory: 4714016k/6003788k available (3831k kernel code, 1116720k absent, 173052k reserved, 2628k data, 616k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. NR_IRQS:2304 xen: registering gsi 0 triggering 1 polarity 0 xen: --> irq=0 xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0 xen: registering gsi 1 triggering 1 polarity 0 xen: --> irq=1 xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0 xen: registering gsi 3 triggering 1 polarity 0 xen: --> irq=3 xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3 triggering 0 polarity 0 xen: registering gsi 4 triggering 1 polarity 0 xen: --> irq=4 xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0 xen: registering gsi 5 triggering 1 polarity 0 xen: --> irq=5 xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5 triggering 0 polarity 0 xen: registering gsi 6 triggering 1 polarity 0 xen: --> irq=6 xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0 xen: registering gsi 7 triggering 1 polarity 0 xen: --> irq=7 xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7 triggering 0 polarity 0 xen: registering gsi 8 triggering 1 polarity 0 xen: --> irq=8 xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0 xen: registering gsi 9 triggering 0 polarity 0 xen: --> irq=9 xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9 triggering 1 polarity 0 xen: registering gsi 10 triggering 1 polarity 0 xen: --> irq=10 xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin 10 triggering 0 polarity 0 xen: registering gsi 11 triggering 1 polarity 0 xen: --> irq=11 xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin 11 triggering 0 polarity 0 xen: registering gsi 12 triggering 1 polarity 0 xen: --> irq=12 xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0 xen: registering gsi 13 triggering 1 polarity 0 xen: --> irq=13 xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0 xen: registering gsi 14 triggering 1 polarity 0 xen: --> irq=14 xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin 14 triggering 0 polarity 0 xen: registering gsi 15 triggering 1 polarity 0 xen: --> irq=15 xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin 15 triggering 0 polarity 0 Detected 1729.042 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [hvc0] enabled console [ttyS0] enabled Linux version 2.6.31.13-xen (root@localhost.localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Wed Jul 7 11:17:17 CDT 2010 Command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed xen_release_chunk: looking at area pfn f0000-fec00: 60416 pages freed xen_release_chunk: looking at area pfn fec01-fed10: 271 pages freed xen_release_chunk: looking at area pfn fed14-fed19: 5 pages freed xen_release_chunk: looking at area pfn fed1a-fed1b: 1 pages freed xen_release_chunk: looking at area pfn fed20-fee00: 224 pages freed xen_release_chunk: looking at area pfn fee01-ffd00: 3839 pages freed released 195828 pages of unused memory BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009fc00 (usable) Xen: 000000000009fc00 - 0000000000100000 (reserved) Xen: 0000000000100000 - 00000000bbdd4000 (usable) Xen: 00000000bbdd4000 - 00000000bbec2000 (reserved) Xen: 00000000bbec2000 - 00000000bbfc2000 (ACPI NVS) Xen: 00000000bbfc2000 - 00000000bbfff000 (ACPI data) Xen: 00000000bbfff000 - 00000000bc000000 (usable) Xen: 00000000bc000000 - 00000000c0000000 (reserved) Xen: 00000000e0000000 - 00000000f0000000 (reserved) Xen: 00000000fec00000 - 00000000fec01000 (reserved) Xen: 00000000fed10000 - 00000000fed14000 (reserved) Xen: 00000000fed19000 - 00000000fed1a000 (reserved) Xen: 00000000fed1b000 - 00000000fed20000 (reserved) Xen: 00000000fee00000 - 00000000fee01000 (reserved) Xen: 00000000ffd00000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 000000016e713000 (usable) DMI 2.6 present. last_pfn = 0x16e713 max_arch_pfn = 0x400000000 last_pfn = 0xbc000 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bc000000 0000000000 - 00bc000000 page 4k kernel direct mapping tables up to bc000000 @ 100000-6e4000 init_memory_mapping: 0000000100000000-000000016e713000 0100000000 - 016e713000 page 4k kernel direct mapping tables up to 16e713000 @ 2be2000-375d000 RAMDISK: 01884000 - 02051400 ACPI: RSDP 00000000000f2ae0 00024 (v02 HPQOEM) ACPI: XSDT 00000000bbffe120 00094 (v01 HPQOEM SLIC-MPC 0000000F 01000013) ACPI: FACP 00000000bbffc000 000F4 (v03 HPQOEM 1520 0000000F HP 00000001) ACPI: DSDT 00000000bbfdb000 1BCEC (v02 HPQOEM 1520 00000001 INTL 20060912) ACPI: FACS 00000000bbf41000 00040 ACPI: HPET 00000000bbffb000 00038 (v01 HPQOEM 1520 00000001 HP 00000001) ACPI: APIC 00000000bbffa000 000BC (v01 HPQOEM 1520 00000001 HP 00000001) ACPI: MCFG 00000000bbff9000 0003C (v01 HPQOEM 1520 00000001 HP 00000001) ACPI: TCPA 00000000bbff7000 00032 (v02 HPQOEM 1520 00000000 HP 00000001) ACPI: SSDT 00000000bbfd8000 00135 (v01 HPQOEM SataAhci 00001000 INTL 20060912) ACPI: SSDT 00000000bbfd7000 00314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912) ACPI: SLIC 00000000bbfd6000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: SSDT 00000000bbfd2000 02566 (v01 HPQOEM NVIDIAGF 00000001 INTL 20060912) ACPI: 00000000bbfd1000 00068 (v01 INTEL CP_FIELD 00000001 INTL 00000001) ACPI: SSDT 00000000bbfd0000 00A10 (v01 PmRef CpuPm 00003000 INTL 20060912) ACPI: SSDT 00000000bbfcf000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912) ACPI: SSDT 00000000bbfce000 00225 (v01 PmRef ApTst 00003000 INTL 20060912) ACPI: ASF! 00000000bbff8000 000A0 (v32 HPQOEM 1520 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000016e713000 Bootmem setup node 0 0000000000000000-000000016e713000 NODE_DATA [0000000000001000 - 0000000000005fff] bootmap [0000000000008000 - 0000000000035ce7] pages 2e (9 early reservations) ==> bootmem [0000000000 - 016e713000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0002bc7000 - 0002be2000] XEN PAGETABLES ==> [0002bc7000 - 0002be2000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #3 [0001000000 - 0001863170] TEXT DATA BSS ==> [0001000000 - 0001863170] #4 [0001884000 - 0002051400] RAMDISK ==> [0001884000 - 0002051400] #5 [0002052000 - 0002bc7000] XEN START INFO ==> [0002052000 - 0002bc7000] #6 [0001864000 - 0001864229] BRK ==> [0001864000 - 0001864229] #7 [0000100000 - 00006c6000] PGTABLE ==> [0000100000 - 00006c6000] #8 [0002be2000 - 0002f58000] PGTABLE ==> [0002be2000 - 0002f58000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0016e713 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bbdd4 0: 0x000bbfff -> 0x000bc000 0: 0x00100000 -> 0x0016e713 On node 0 totalpages: 1221767 DMA zone: 56 pages used for memmap DMA zone: 1481 pages reserved DMA zone: 2462 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 751117 pages, LIFO batch:31 Normal zone: 6185 pages used for memmap Normal zone: 446186 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 00000000bbdd4000 - 00000000bbec2000 PM: Registered nosave memory: 00000000bbec2000 - 00000000bbfc2000 PM: Registered nosave memory: 00000000bbfc2000 - 00000000bbfff000 PM: Registered nosave memory: 00000000bc000000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 PM: Registered nosave memory: 00000000fed14000 - 00000000fed19000 PM: Registered nosave memory: 00000000fed19000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000 PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffd00000 PM: Registered nosave memory: 00000000ffd00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Allocated 22 4k pages, static data 89056 bytes trying to map vcpu_info 0 at ffffc9000000b020, mfn 192dc2, offset 32 cpu 0 using vcpu_info at ffffc9000000b020 trying to map vcpu_info 1 at ffffc90000023020, mfn 192dd8, offset 32 cpu 1 using vcpu_info at ffffc90000023020 trying to map vcpu_info 2 at ffffc9000003b020, mfn 192dee, offset 32 cpu 2 using vcpu_info at ffffc9000003b020 trying to map vcpu_info 3 at ffffc90000053020, mfn 192a04, offset 32 cpu 3 using vcpu_info at ffffc90000053020 trying to map vcpu_info 4 at ffffc9000006b020, mfn 192a1a, offset 32 cpu 4 using vcpu_info at ffffc9000006b020 trying to map vcpu_info 5 at ffffc90000083020, mfn 192a30, offset 32 cpu 5 using vcpu_info at ffffc90000083020 trying to map vcpu_info 6 at ffffc9000009b020, mfn 192a46, offset 32 cpu 6 using vcpu_info at ffffc9000009b020 trying to map vcpu_info 7 at ffffc900000b3020, mfn 192a5c, offset 32 cpu 7 using vcpu_info at ffffc900000b3020 Xen: using vcpu_info placement Built 1 zonelists in Node order, mobility grouping on. Total pages: 1199765 Policy zone: Normal Kernel command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1 PID hash table entries: 4096 (order: 12, 32768 bytes) Initializing CPU#0 PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB) xen_swiotlb_fixup: buf=ffff880020000000 size=67108864 xen_swiotlb_fixup: buf=ffff880024060000 size=32768 Placing 64MB Xen software IO TLB between ffff880020000000 - ffff880024000000 Xen software IO TLB at phys 0x20000000 - 0x24000000 Memory: 4714016k/6003788k available (3831k kernel code, 1116720k absent, 173052k reserved, 2628k data, 616k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. NR_IRQS:2304 xen: registering gsi 0 triggering 1 polarity 0 xen: --> irq=0 xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0 xen: registering gsi 1 triggering 1 polarity 0 xen: --> irq=1 xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0 xen: registering gsi 3 triggering 1 polarity 0 xen: --> irq=3 xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3 triggering 0 polarity 0 xen: registering gsi 4 triggering 1 polarity 0 xen: --> irq=4 xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0 xen: registering gsi 5 triggering 1 polarity 0 xen: --> irq=5 xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5 triggering 0 polarity 0 xen: registering gsi 6 triggering 1 polarity 0 xen: --> irq=6 xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0 xen: registering gsi 7 triggering 1 polarity 0 xen: --> irq=7 xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7 triggering 0 polarity 0 xen: registering gsi 8 triggering 1 polarity 0 xen: --> irq=8 xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0 xen: registering gsi 9 triggering 0 polarity 0 xen: --> irq=9 xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9 triggering 1 polarity 0 xen: registering gsi 10 triggering 1 polarity 0 xen: --> irq=10 xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin 10 triggering 0 polarity 0 xen: registering gsi 11 triggering 1 polarity 0 xen: --> irq=11 xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin 11 triggering 0 polarity 0 xen: registering gsi 12 triggering 1 polarity 0 xen: --> irq=12 xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0 xen: registering gsi 13 triggering 1 polarity 0 xen: --> irq=13 xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0 xen: registering gsi 14 triggering 1 polarity 0 xen: --> irq=14 xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin 14 triggering 0 polarity 0 xen: registering gsi 15 triggering 1 polarity 0 xen: --> irq=15 xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin 15 triggering 0 polarity 0 Detected 1729.042 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [hvc0] enabled console [ttyS0] enabled Xen: using vcpuop timer interface installing Xen timer for CPU 0 xen: vcpu_time_info placement not supported Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.08 BogoMIPS (lpj=1729042) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 0/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks Performance Counters: unsupported p6 CPU model 30 no PMU driver, software counters only. SMP alternatives: switching to UP code ACPI: Core revision 20090521 calling migration_init+0x0/0x80 @ 1 initcall migration_init+0x0/0x80 returned 1 after 976 usecs initcall migration_init+0x0/0x80 returned with error code 1 calling spawn_ksoftirqd+0x0/0x7a @ 1 initcall spawn_ksoftirqd+0x0/0x7a returned 0 after 976 usecs calling init_call_single_data+0x0/0xa8 @ 1 initcall init_call_single_data+0x0/0xa8 returned 0 after 0 usecs calling spawn_softlockup_task+0x0/0x96 @ 1 initcall spawn_softlockup_task+0x0/0x96 returned 0 after 976 usecs calling relay_init+0x0/0x3c @ 1 initcall relay_init+0x0/0x3c returned 0 after 0 usecs calling tracer_alloc_buffers+0x0/0x18c @ 1 initcall tracer_alloc_buffers+0x0/0x18c returned 0 after 0 usecs calling init_trace_printk+0x0/0x39 @ 1 initcall init_trace_printk+0x0/0x39 returned 0 after 0 usecs installing Xen timer for CPU 1 SMP alternatives: switching to SMP code Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 1/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks installing Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 2/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks installing Xen timer for CPU 3 Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 3/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks installing Xen timer for CPU 4 Initializing CPU#4 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 4/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks installing Xen timer for CPU 5 Initializing CPU#5 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 5/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks installing Xen timer for CPU 6 Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 6/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks installing Xen timer for CPU 7 Initializing CPU#7 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 7/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks Brought up 8 CPUs CPU0 attaching sched-domain: domain 0: span 0-7 level CPU groups: 0 1 2 3 4 5 6 7 CPU1 attaching sched-domain: domain 0: span 0-7 level CPU groups: 1 2 3 4 5 6 7 0 CPU2 attaching sched-domain: domain 0: span 0-7 level CPU groups: 2 3 4 5 6 7 0 1 CPU3 attaching sched-domain: domain 0: span 0-7 level CPU groups: 3 4 5 6 7 0 1 2 CPU4 attaching sched-domain: domain 0: span 0-7 level CPU groups: 4 5 6 7 0 1 2 3 CPU5 attaching sched-domain: domain 0: span 0-7 level CPU groups: 5 6 7 0 1 2 3 4 CPU6 attaching sched-domain: domain 0: span 0-7 level CPU groups: 6 7 0 1 2 3 4 5 CPU7 attaching sched-domain: domain 0: span 0-7 level CPU groups: 7 0 1 2 3 4 5 6 calling init_mmap_min_addr+0x0/0x4e @ 1 initcall init_mmap_min_addr+0x0/0x4e returned 0 after 0 usecs calling init_cpufreq_transition_notifier_list+0x0/0x43 @ 1 initcall init_cpufreq_transition_notifier_list+0x0/0x43 returned 0 after 976 usecs calling net_ns_init+0x0/0x162 @ 1 initcall net_ns_init+0x0/0x162 returned 0 after 0 usecs calling e820_mark_nvs_memory+0x0/0x65 @ 1 initcall e820_mark_nvs_memory+0x0/0x65 returned 0 after 976 usecs calling cpufreq_tsc+0x0/0x28 @ 1 initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs calling pci_reboot_init+0x0/0x3c @ 1 initcall pci_reboot_init+0x0/0x3c returned 0 after 0 usecs calling init_lapic_sysfs+0x0/0x67 @ 1 initcall init_lapic_sysfs+0x0/0x67 returned 0 after 976 usecs calling print_banner+0x0/0xe @ 1 Booting paravirtualized kernel on Xen Xen version: 4.0.0 (preserve-AD) (dom0) initcall print_banner+0x0/0xe returned 0 after 976 usecs calling alloc_frozen_cpus+0x0/0x2e @ 1 initcall alloc_frozen_cpus+0x0/0x2e returned 0 after 0 usecs calling sysctl_init+0x0/0x3e @ 1 initcall sysctl_init+0x0/0x3e returned 0 after 0 usecs calling ksysfs_init+0x0/0xe1 @ 1 initcall ksysfs_init+0x0/0xe1 returned 0 after 0 usecs calling async_init+0x0/0x80 @ 1 initcall async_init+0x0/0x80 returned 0 after 976 usecs calling init_jiffies_clocksource+0x0/0x39 @ 1 initcall init_jiffies_clocksource+0x0/0x39 returned 0 after 0 usecs calling pm_init+0x0/0x70 @ 1 initcall pm_init+0x0/0x70 returned 0 after 0 usecs calling pm_disk_init+0x0/0x40 @ 1 initcall pm_disk_init+0x0/0x40 returned 0 after 0 usecs calling swsusp_header_init+0x0/0x54 @ 1 initcall swsusp_header_init+0x0/0x54 returned 0 after 0 usecs calling filelock_init+0x0/0x56 @ 1 initcall filelock_init+0x0/0x56 returned 0 after 976 usecs calling init_misc_binfmt+0x0/0x64 @ 1 initcall init_misc_binfmt+0x0/0x64 returned 0 after 0 usecs calling init_script_binfmt+0x0/0x3b @ 1 initcall init_script_binfmt+0x0/0x3b returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x3b @ 1 initcall init_elf_binfmt+0x0/0x3b returned 0 after 0 usecs calling init_compat_elf_binfmt+0x0/0x3b @ 1 initcall init_compat_elf_binfmt+0x0/0x3b returned 0 after 0 usecs calling debugfs_init+0x0/0x7b @ 1 initcall debugfs_init+0x0/0x7b returned 0 after 0 usecs calling securityfs_init+0x0/0x72 @ 1 initcall securityfs_init+0x0/0x72 returned 0 after 0 usecs calling random32_init+0x0/0xf6 @ 1 initcall random32_init+0x0/0xf6 returned 0 after 0 usecs calling gnttab_init+0x0/0x1fa @ 1 Grant tables using version 2 layout. Grant table initialized initcall gnttab_init+0x0/0x1fa returned 0 after 1952 usecs calling cpufreq_core_init+0x0/0x98 @ 1 initcall cpufreq_core_init+0x0/0x98 returned 0 after 0 usecs calling cpuidle_init+0x0/0x61 @ 1 initcall cpuidle_init+0x0/0x61 returned 0 after 0 usecs calling sock_init+0x0/0x86 @ 1 initcall sock_init+0x0/0x86 returned 0 after 976 usecs calling netpoll_init+0x0/0x58 @ 1 initcall netpoll_init+0x0/0x58 returned 0 after 0 usecs calling netlink_proto_init+0x0/0x1ce @ 1 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x1ce returned 0 after 976 usecs calling bdi_class_init+0x0/0x69 @ 1 initcall bdi_class_init+0x0/0x69 returned 0 after 976 usecs calling kobject_uevent_init+0x0/0x7c @ 1 initcall kobject_uevent_init+0x0/0x7c returned 0 after 976 usecs calling pcibus_class_init+0x0/0x40 @ 1 initcall pcibus_class_init+0x0/0x40 returned 0 after 976 usecs calling pci_driver_init+0x0/0x39 @ 1 initcall pci_driver_init+0x0/0x39 returned 0 after 976 usecs calling backlight_class_init+0x0/0x85 @ 1 initcall backlight_class_init+0x0/0x85 returned 0 after 976 usecs calling xenbus_probe_init+0x0/0x27c @ 1 xenbus_probe_init ok initcall xenbus_probe_init+0x0/0x27c returned 0 after 976 usecs calling tty_class_init+0x0/0x59 @ 1 initcall tty_class_init+0x0/0x59 returned 0 after 976 usecs calling vtconsole_class_init+0x0/0xe5 @ 1 initcall vtconsole_class_init+0x0/0xe5 returned 0 after 976 usecs calling register_node_type+0x0/0x88 @ 1 initcall register_node_type+0x0/0x88 returned 0 after 976 usecs calling amd_postcore_init+0x0/0x83f @ 1 initcall amd_postcore_init+0x0/0x83f returned 0 after 0 usecs calling arch_kdebugfs_init+0x0/0x4c @ 1 initcall arch_kdebugfs_init+0x0/0x4c returned 0 after 0 usecs calling mtrr_if_init+0x0/0x8b @ 1 initcall mtrr_if_init+0x0/0x8b returned 0 after 0 usecs calling ffh_cstate_init+0x0/0x52 @ 1 initcall ffh_cstate_init+0x0/0x52 returned 0 after 976 usecs calling acpi_pci_init+0x0/0x7d @ 1 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered initcall acpi_pci_init+0x0/0x7d returned 0 after 976 usecs calling register_xen_pci_notifier+0x0/0x60 @ 1 initcall register_xen_pci_notifier+0x0/0x60 returned 0 after 0 usecs calling setup_vcpu_hotplug_event+0x0/0x4a @ 1 initcall setup_vcpu_hotplug_event+0x0/0x4a returned 0 after 0 usecs calling dmi_id_init+0x0/0x35e @ 1 initcall dmi_id_init+0x0/0x35e returned 0 after 976 usecs calling pci_arch_init+0x0/0x81 @ 1 PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access initcall pci_arch_init+0x0/0x81 returned 0 after 41985 usecs calling topology_init+0x0/0xa7 @ 1 initcall topology_init+0x0/0xa7 returned 0 after 976 usecs calling mtrr_init_finialize+0x0/0x65 @ 1 initcall mtrr_init_finialize+0x0/0x65 returned 0 after 0 usecs calling param_sysfs_init+0x0/0x22e @ 1 initcall param_sysfs_init+0x0/0x22e returned 0 after 5858 usecs calling pm_sysrq_init+0x0/0x41 @ 1 initcall pm_sysrq_init+0x0/0x41 returned 0 after 0 usecs calling audit_watch_init+0x0/0x57 @ 1 initcall audit_watch_init+0x0/0x57 returned 0 after 0 usecs calling init_slow_work+0x0/0x69 @ 1 initcall init_slow_work+0x0/0x69 returned 0 after 0 usecs calling default_bdi_init+0x0/0x5a @ 1 initcall default_bdi_init+0x0/0x5a returned 0 after 976 usecs calling init_bio+0x0/0x14f @ 1 bio: create slab <bio-0> at 0 initcall init_bio+0x0/0x14f returned 0 after 976 usecs calling fsnotify_init+0x0/0x39 @ 1 initcall fsnotify_init+0x0/0x39 returned 0 after 976 usecs calling fsnotify_notification_init+0x0/0x90 @ 1 initcall fsnotify_notification_init+0x0/0x90 returned 0 after 976 usecs calling cryptomgr_init+0x0/0x39 @ 1 initcall cryptomgr_init+0x0/0x39 returned 0 after 0 usecs calling blk_settings_init+0x0/0x52 @ 1 initcall blk_settings_init+0x0/0x52 returned 0 after 0 usecs calling blk_ioc_init+0x0/0x52 @ 1 initcall blk_ioc_init+0x0/0x52 returned 0 after 976 usecs calling blk_softirq_init+0x0/0x8f @ 1 initcall blk_softirq_init+0x0/0x8f returned 0 after 0 usecs calling genhd_device_init+0x0/0x9e @ 1 initcall genhd_device_init+0x0/0x9e returned 0 after 976 usecs calling pci_slot_init+0x0/0x6d @ 1 initcall pci_slot_init+0x0/0x6d returned 0 after 0 usecs calling fbmem_init+0x0/0xb9 @ 1 initcall fbmem_init+0x0/0xb9 returned 0 after 976 usecs calling acpi_init+0x0/0x27f @ 1 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8102f6cf>] add_pin_to_irq_node+0x24/0xaf PGD 0 Oops: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.31.13-xen #1 HP EliteBook 8740w RIP: e030:[<ffffffff8102f6cf>] [<ffffffff8102f6cf>] add_pin_to_irq_node+0x24/0xaf RSP: e02b:ffff88016d4b1d90 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000009 RCX: 0000000000000009 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 R10: 000000000000000f R11: 0000000000000002 R12: 0000000000000009 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000009 FS: 0000000000000000(0000) GS:ffffc90000000000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff88016d4b0000, task ffff88016d4a8000) Stack: ffff88016d688f50 ffffffff811699c1 0000000060629933 0000000000000009 <0> 0000000000000000 0000000000000001 ffffffff8156b900 ffffffff81030e36 <0> ffffffffffffffff 0000000000000049 0000000060629933 0000000000000009 Call Trace: [<ffffffff811699c1>] ? internal_create_group+0xf4/0x174 [<ffffffff81030e36>] ? setup_IO_APIC_irq_extra+0xcd/0x153 [<ffffffff8121c4ba>] ? acpi_ev_sci_xrupt_handler+0x0/0x4a [<ffffffff8102a863>] ? acpi_gsi_to_irq+0x24/0x40 [<ffffffff8120aa37>] ? acpi_os_install_interrupt_handler+0x36/0xbd [<ffffffff81694658>] ? acpi_init+0x0/0x27f [<ffffffff8121b89e>] ? acpi_ev_install_xrupt_handlers+0x1a/0x79 [<ffffffff81694658>] ? acpi_init+0x0/0x27f [<ffffffff816946d8>] ? acpi_init+0x80/0x27f [<ffffffff81694658>] ? acpi_init+0x0/0x27f [<ffffffff81076dd5>] ? ktime_get+0x1c/0x66 [<ffffffff81694658>] ? acpi_init+0x0/0x27f [<ffffffff8100a092>] ? do_one_initcall+0x64/0x17c [<ffffffff816677a8>] ? kernel_init+0x14f/0x1be [<ffffffff81014fea>] ? child_rip+0xa/0x20 [<ffffffff810141a7>] ? int_ret_from_sys_call+0x7/0x1b [<ffffffff8101495d>] ? retint_restore_args+0x5/0x6 [<ffffffff81014fe0>] ? child_rip+0x0/0x20 Code: 5b 5d 41 5c 41 5d c3 41 55 49 89 fd 89 f7 41 54 41 89 cc 55 89 d5 53 48 83 ec 18 65 48 8b 04 25 28 00 00 00 48 89 44 24 10 31 c0 <49> 8b 5d 00 48 85 db 75 4a e8 35 ff ff ff 48 85 c0 75 2d 48 8b RIP [<ffffffff8102f6cf>] add_pin_to_irq_node+0x24/0xaf RSP <ffff88016d4b1d90> CR2: 0000000000000000 ---[ end trace f17e946d22a56015 ]--- Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: swapper Tainted: G D 2.6.31.13-xen #1 Call Trace: [<ffffffff810581a2>] ? panic+0x96/0x153 [<ffffffff8100f2e2>] ? check_events+0x12/0x20 [<ffffffff813b6ebb>] ? _write_lock_irq+0x1b/0x43 [<ffffffff81064104>] ? exit_ptrace+0x9a/0x119 [<ffffffff813b6ebb>] ? _write_lock_irq+0x1b/0x43 [<ffffffff8105bb09>] ? do_exit+0x82/0x618 [<ffffffff813b8093>] ? oops_end+0xc4/0xe0 [<ffffffff81038d2c>] ? no_context+0x1fe/0x222 [<ffffffff813b73c5>] ? page_fault+0x25/0x30 [<ffffffff8102f6cf>] ? add_pin_to_irq_node+0x24/0xaf [<ffffffff811699c1>] ? internal_create_group+0xf4/0x174 [<ffffffff81030e36>] ? setup_IO_APIC_irq_extra+0xcd/0x153 [<ffffffff8121c4ba>] ? acpi_ev_sci_xrupt_handler+0x0/0x4a [<ffffffff8102a863>] ? acpi_gsi_to_irq+0x24/0x40 [<ffffffff8120aa37>] ? acpi_os_install_interrupt_handler+0x36/0xbd [<ffffffff81694658>] ? acpi_init+0x0/0x27f [<ffffffff8121b89e>] ? acpi_ev_install_xrupt_handlers+0x1a/0x79 [<ffffffff81694658>] ? acpi_init+0x0/0x27f [<ffffffff816946d8>] ? acpi_init+0x80/0x27f [<ffffffff81694658>] ? acpi_init+0x0/0x27f [<ffffffff81076dd5>] ? ktime_get+0x1c/0x66 [<ffffffff81694658>] ? acpi_init+0x0/0x27f [<ffffffff8100a092>] ? do_one_initcall+0x64/0x17c [<ffffffff816677a8>] ? kernel_init+0x14f/0x1be [<ffffffff81014fea>] ? child_rip+0xa/0x20 [<ffffffff810141a7>] ? int_ret_from_sys_call+0x7/0x1b [<ffffffff8101495d>] ? retint_restore_args+0x5/0x6 [<ffffffff81014fe0>] ? child_rip+0x0/0x20 [-- Attachment #3: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot - global_irq != irq for INT_SRC_OVR 2010-07-07 16:59 ` ktckd @ 2010-07-13 15:06 ` Konrad Rzeszutek Wilk 2010-07-13 18:22 ` Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot ktckd 1 sibling, 0 replies; 8+ messages in thread From: Konrad Rzeszutek Wilk @ 2010-07-13 15:06 UTC (permalink / raw) To: ktckd; +Cc: Jeremy Fitzhardinge, xen-devel On Wed, Jul 07, 2010 at 11:59:58AM -0500, ktckd wrote: > Attaching the serial with the grub options mentioned below. Do let me know > if you need any other information. > > I was using 2.6.18.8 when I tried xen 3.4.0 OK, that is an ancient Dom0. You can try to re-use this Dom0 (2.6.31.x) with that Xen 3.4.0 and see if it works.. but > BUG: unable to handle kernel NULL pointer dereference at (null) > IP: [<ffffffff8102f6cf>] add_pin_to_irq_node+0x24/0xaf > PGD 0 > Oops: 0000 [#1] SMP > last sysfs file: > CPU 0 > Modules linked in: > Pid: 1, comm: swapper Not tainted 2.6.31.13-xen #1 HP EliteBook 8740w > RIP: e030:[<ffffffff8102f6cf>] [<ffffffff8102f6cf>] add_pin_to_irq_node+0x24/0xaf > RSP: e02b:ffff88016d4b1d90 EFLAGS: 00010246 > RAX: 0000000000000000 RBX: 0000000000000009 RCX: 0000000000000009 > RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 > RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 > R10: 000000000000000f R11: 0000000000000002 R12: 0000000000000009 > R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000009 > FS: 0000000000000000(0000) GS:ffffc90000000000(0000) knlGS:0000000000000000 > CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b > CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002660 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process swapper (pid: 1, threadinfo ffff88016d4b0000, task ffff88016d4a8000) > Stack: > ffff88016d688f50 ffffffff811699c1 0000000060629933 0000000000000009 > <0> 0000000000000000 0000000000000001 ffffffff8156b900 ffffffff81030e36 > <0> ffffffffffffffff 0000000000000049 0000000060629933 0000000000000009 > Call Trace: > [<ffffffff811699c1>] ? internal_create_group+0xf4/0x174 > [<ffffffff81030e36>] ? setup_IO_APIC_irq_extra+0xcd/0x153 > [<ffffffff8121c4ba>] ? acpi_ev_sci_xrupt_handler+0x0/0x4a > [<ffffffff8102a863>] ? acpi_gsi_to_irq+0x24/0x40 > [<ffffffff8120aa37>] ? acpi_os_install_interrupt_handler+0x36/0xbd > [<ffffffff81694658>] ? acpi_init+0x0/0x27f > [<ffffffff8121b89e>] ? acpi_ev_install_xrupt_handlers+0x1a/0x79 > [<ffffffff81694658>] ? acpi_init+0x0/0x27f > [<ffffffff816946d8>] ? acpi_init+0x80/0x27f > [<ffffffff81694658>] ? acpi_init+0x0/0x27f .. looking at this stack trace and the source code and the serial output (thank you very much), this caught my eye: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. [ which looks to me that pin 0 and pin 2 of the IOAPIC are routed to the same spot ] and: xen: registering gsi 0 triggering 1 polarity 0 xen: --> irq=0 xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0 xen: registering gsi 1 triggering 1 polarity 0 xen: --> irq=1 xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0 xen: registering gsi 3 triggering 1 polarity 0 xen: --> irq=3 The lack of IRQ 2 is the worrying part. The reason for that is b/c the bus_irq (0) != for GSI IRQ 2 (2) so we end up in acpi_get_override_irq going over the 16 IRQs and return -1. Hence xen_setup_pirqs fails to setup an IRQ handler for IRQ 2. Which would explain why the 'add_pin_to_irq_node' would fail. In one part it tries to do "entry = cfg->irq_2_pin;" which would throw a NULL pointer exception as 'cfg' for IRQ 2 has not been defined. This is all just a speculation. But we can try testing this out with this hack patch: NOTE: You might need to change the polarity to zero instead of 1. diff --git a/arch/x86/xen/pci.c b/arch/x86/xen/pci.c index 1af81dd..1d3cc7f 100644 --- a/arch/x86/xen/pci.c +++ b/arch/x86/xen/pci.c @@ -77,6 +77,7 @@ int xen_register_gsi(u32 gsi, int triggering, int polarity) void __init xen_setup_pirqs(void) { int irq; + int rc; if (0 == nr_ioapics) { for (irq = 0; irq < NR_IRQS_LEGACY; irq++) @@ -88,9 +89,15 @@ void __init xen_setup_pirqs(void) for (irq = 0; irq < NR_IRQS_LEGACY; irq++) { int trigger, polarity; - if (acpi_get_override_irq(irq, &trigger, &polarity) == -1) - continue; + rc = acpi_get_override_irq(irq, &trigger, &polarity); + if (rc == -1) { + printk(KERN_INFO "%s: IRQ: %d bus_irq != global_irq!\n", __FUNCTION__, irq); + if (irq != 2) + continue; + trigger = 1; /* level */ + polarity = 1; /* low, not sure if should be high? */ + } xen_register_gsi(irq, trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE, polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH); ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot 2010-07-07 16:59 ` ktckd 2010-07-13 15:06 ` Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot - global_irq != irq for INT_SRC_OVR Konrad Rzeszutek Wilk @ 2010-07-13 18:22 ` ktckd 2010-07-13 20:06 ` Konrad Rzeszutek Wilk 1 sibling, 1 reply; 8+ messages in thread From: ktckd @ 2010-07-13 18:22 UTC (permalink / raw) To: Konrad Rzeszutek Wilk; +Cc: xen-devel [-- Attachment #1.1: Type: text/plain, Size: 1928 bytes --] Thanks for the suggestion. However I still see the hang with both 0 and 1 Polarity. On Wed, Jul 7, 2010 at 11:59 AM, ktckd <ktckd9@gmail.com> wrote: > Attaching the serial with the grub options mentioned below. Do let me know > if you need any other information. > > I was using 2.6.18.8 when I tried xen 3.4.0 > > > On Tue, Jul 6, 2010 at 9:15 AM, Konrad Rzeszutek Wilk < > konrad.wilk@oracle.com> wrote: > >> On Fri, Jul 02, 2010 at 10:19:02AM -0500, ktckd wrote: >> > ---------- Forwarded message ---------- >> > From: ktckd <ktckd9@gmail.com> >> > Date: Wed, Jun 30, 2010 at 4:49 PM >> > Subject: Re: Xen4.0/FC8/Linux-2.6.31.13 hang on boot >> > To: xen-users@lists.xensource.com >> > >> > >> > Rebuilt Xen4.0 with linux-2.6.18 and have seen no problems during boot. >> So >> > is it the linux kernel that caused the problem? Then why don't I see any >> > problem when I try the 4th grub entry? >> >> We need more than just the screenshots. You need to add these options to >> your Linux kernel line: "console=hvc0 debug initcall_debug" so that we >> can see where it happens. >> >> Also on the Xen line add 'sync_console console_to_ring'. >> >> > >> > >> > ---------- Forwarded message ---------- >> > From: ktckd <ktckd9@gmail.com> >> > Date: Mon, Jun 28, 2010 at 1:23 PM >> > Subject: Xen4.0/FC8/Linux-2.6.31.13 hang on boot >> > To: xen-users@lists.xensource.com >> > >> > >> > Hi list, >> > >> > I am seeing an issue on my notebook with Xen4.0/FC8/Linux-2.6.31.13. The >> > unit has nVidia graphics and basically hangs at the point shown in the >> > image. Not sure where I might be going wrong. Would appreciate if anyone >> can >> > point me in some direction. The unit has no problem booting into 3rd >> > (acpi=off) and 4th boot entry. I remember xen3.4.0 worked fine the last >> time >> > I tried it on this unit. >> >> Was that with the 2.6.31.13 kernel? Or did you use another kernel at >> that time? >> >> > [-- Attachment #1.2: Type: text/html, Size: 2968 bytes --] [-- Attachment #2: Pol0-H.TXT --] [-- Type: text/plain, Size: 52353 bytes --] ^[[0m^[[37m^[[40m^[[2J^[[01;01H^[[=3h^[[2J^[[01;01H^[[2J^[[01;01H^[[=3h^[[2J^[[01;01H __ __ _ _ ___ ___ \ \/ /___ _ __ | || | / _ \ / _ \ \ // _ \ '_ \ | || |_| | | | | | | / \ __/ | | | |__ _| |_| | |_| | /_/\_\___|_| |_| |_|(_)___(_)___/ (XEN) Xen version 4.0.0 (root@localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) Wed Jun 30 16:31:17 CDT 2010 (XEN) Latest ChangeSet: unavailable (XEN) Console output is synchronous. (XEN) Command line: iommu=required loglvl=all guest_loglvl=all sync_console console_to_ring com1=115200,8n1 console=com1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000ef000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000bbdd4000 (usable) (XEN) 00000000bbdd4000 - 00000000bbec2000 (reserved) (XEN) 00000000bbec2000 - 00000000bbfc2000 (ACPI NVS) (XEN) 00000000bbfc2000 - 00000000bbfff000 (ACPI data) (XEN) 00000000bbfff000 - 00000000bc000000 (usable) (XEN) 00000000bc000000 - 00000000c0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 00000000fec01000 (reserved) (XEN) 00000000fed10000 - 00000000fed14000 (reserved) (XEN) 00000000fed19000 - 00000000fed1a000 (reserved) (XEN) 00000000fed1b000 - 00000000fed20000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffd00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 00000001c0000000 (usable) (XEN) ACPI: RSDP 000F2AE0, 0024 (r2 HPQOEM) (XEN) ACPI: XSDT BBFFE120, 0094 (r1 HPQOEM SLIC-MPC F 1000013) (XEN) ACPI: FACP BBFFC000, 00F4 (r3 HPQOEM 1520 F HP 1) (XEN) ACPI: DSDT BBFDB000, 1BCEC (r2 HPQOEM 1520 1 INTL 20060912) (XEN) ACPI: FACS BBF41000, 0040 (XEN) ACPI: HPET BBFFB000, 0038 (r1 HPQOEM 1520 1 HP 1) (XEN) ACPI: APIC BBFFA000, 00BC (r1 HPQOEM 1520 1 HP 1) (XEN) ACPI: MCFG BBFF9000, 003C (r1 HPQOEM 1520 1 HP 1) (XEN) ACPI: TCPA BBFF7000, 0032 (r2 HPQOEM 1520 0 HP 1) (XEN) ACPI: SSDT BBFD8000, 0135 (r1 HPQOEM SataAhci 1000 INTL 20060912) (XEN) ACPI: SSDT BBFD7000, 0314 (r1 HPQOEM PtidDevc 1000 INTL 20060912) (XEN) ACPI: SLIC BBFD6000, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) (XEN) ACPI: SSDT BBFD2000, 2566 (r1 HPQOEM NVIDIAGF 1 INTL 20060912) (XEN) ACPI: DMAR BBFD1000, 0068 (r1 INTEL CP_FIELD 1 INTL 1) (XEN) ACPI: SSDT BBFD0000, 0A10 (r1 PmRef CpuPm 3000 INTL 20060912) (XEN) ACPI: SSDT BBFCF000, 0288 (r1 PmRef Cpu0Tst 3000 INTL 20060912) (XEN) ACPI: SSDT BBFCE000, 0225 (r1 PmRef ApTst 3000 INTL 20060912) (XEN) ACPI: ASF! BBFF8000, 00A0 (r32 HPQOEM 1520 1 HP 1) (XEN) System RAM: 6050MB (6196088kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-00000001c0000000 (XEN) Domain heap initialised (XEN) DMI 2.6 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x408 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0] (XEN) ACPI: wakeup_vec[bbf4100c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) (XEN) Processor #1 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) (XEN) Processor #2 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) (XEN) Processor #3 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) (XEN) Processor #4 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) (XEN) Processor #5 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) (XEN) Processor #6 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) (XEN) Processor #7 7:14 APIC version 21 (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000 (XEN) [VT-D]dmar.c:504: RMRR address range not in reserved memory base = 0 end = fff; iommu_inclusive_mapping=1 parameter may be needed. (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 1729.041 MHz processor. (XEN) Initing memory sharing. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs enabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging detected. (XEN) Intel machine check reporting enabled (XEN) Intel VT-d Snoop Control supported. (XEN) Intel VT-d DMA Passthrough not supported. (XEN) Intel VT-d Queued Invalidation supported. (XEN) Intel VT-d Interrupt Remapping not supported. (XEN) I/O virtualisation enabled (XEN) I/O virtualisation for PV guests disabled (XEN) Total of 8 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) TSC is reliable, synchronization unnecessary (XEN) Platform timer is 14.318MHz HPET ÿ(XEN) Allocated console ring of 64 KiB. (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) microcode.c:73:d32767 microcode: CPU4 resumed (XEN) Brought up 8 CPUs (XEN) microcode.c:73:d32767 microcode: CPU3 resumed (XEN) microcode.c:73:d32767 microcode: CPU5 resumed (XEN) microcode.c:73:d32767 microcode: CPU6 resumed (XEN) microcode.c:73:d32767 microcode: CPU2 resumed (XEN) microcode.c:73:d32767 microcode: CPU7 resumed (XEN) Turbo Mode detected! (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1884000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 00000001b4000000->00000001b8000000 (1484563 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81884000 (XEN) Init. ramdisk: ffffffff81884000->ffffffff82051400 (XEN) Phys-Mach map: ffffffff82052000->ffffffff82bc5898 (XEN) Start info: ffffffff82bc6000->ffffffff82bc64b4 (XEN) Page tables: ffffffff82bc7000->ffffffff82be2000 (XEN) Boot stack: ffffffff82be2000->ffffffff82be3000 (XEN) TOTAL: ffffffff80000000->ffffffff83000000 (XEN) ENTRY ADDRESS: ffffffff81666de0 (XEN) Dom0 has maximum 8 VCPUs (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) ********************************************** (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS (XEN) ******* This option is intended to aid debugging of Xen by ensuring (XEN) ******* that all output is synchronously delivered on the serial line. (XEN) ******* However it can introduce SIGNIFICANT latencies and affect (XEN) ******* timekeeping. It is NOT recommended for production use! (XEN) ********************************************** (XEN) 3... 2... 1... (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 156kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... (XEN) io_apic.c:2290: (XEN) ioapic_guest_write: apic=0, pin=2, irq=0 (XEN) ioapic_guest_write: new_entry=000109f0 (XEN) ioapic_guest_write: old_entry=000009f0 pirq=0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) irq.c:1445: dom0: pirq 0 or irq 3 already mapped (XEN) io_apic.c:2290: (XEN) ioapic_guest_write: apic=0, pin=4, irq=4 (XEN) ioapic_guest_write: new_entry=000109f1 (XEN) ioapic_guest_write: old_entry=000009f1 pirq=0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) irq.c:1445: dom0: pirq 0 or irq 5 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 6 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 7 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 8 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 9 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 10 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 11 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 12 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 13 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 14 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 15 already mapped (XEN) allocated vector 21 for irq 16 (XEN) irq.c:1445: dom0: pirq 0 or irq 16 already mapped (XEN) allocated vector 29 for irq 20 (XEN) irq.c:1445: dom0: pirq 0 or irq 20 already mapped (XEN) allocated vector 31 for irq 21 (XEN) irq.c:1445: dom0: pirq 0 or irq 21 already mapped (XEN) allocated vector 39 for irq 22 (XEN) irq.c:1445: dom0: pirq 0 or irq 22 already mapped (XEN) allocated vector 41 for irq 23 (XEN) irq.c:1445: dom0: pirq 0 or irq 23 already mapped (XEN) io_apic.c:2290: (XEN) ioapic_guest_write: apic=0, pin=0, irq=0 (XEN) ioapic_guest_write: new_entry=000009f0 (XEN) ioapic_guest_write: old_entry=00010260 pirq=0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) io_apic.c:2290: (XEN) ioapic_guest_write: apic=0, pin=2, irq=0 (XEN) ioapic_guest_write: new_entry=000189f0 (XEN) ioapic_guest_write: old_entry=000009f0 pirq=2 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! Linux version 2.6.31.13-xen (root@localhost.localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #3 SMP Tue Jul 13 12:30:31 CDT 2010 Command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed xen_release_chunk: looking at area pfn f0000-fec00: 60416 pages freed xen_release_chunk: looking at area pfn fec01-fed10: 271 pages freed xen_release_chunk: looking at area pfn fed14-fed19: 5 pages freed xen_release_chunk: looking at area pfn fed1a-fed1b: 1 pages freed xen_release_chunk: looking at area pfn fed20-fee00: 224 pages freed xen_release_chunk: looking at area pfn fee01-ffd00: 3839 pages freed released 195828 pages of unused memory BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009fc00 (usable) Xen: 000000000009fc00 - 0000000000100000 (reserved) Xen: 0000000000100000 - 00000000bbdd4000 (usable) Xen: 00000000bbdd4000 - 00000000bbec2000 (reserved) Xen: 00000000bbec2000 - 00000000bbfc2000 (ACPI NVS) Xen: 00000000bbfc2000 - 00000000bbfff000 (ACPI data) Xen: 00000000bbfff000 - 00000000bc000000 (usable) Xen: 00000000bc000000 - 00000000c0000000 (reserved) Xen: 00000000e0000000 - 00000000f0000000 (reserved) Xen: 00000000fec00000 - 00000000fec01000 (reserved) Xen: 00000000fed10000 - 00000000fed14000 (reserved) Xen: 00000000fed19000 - 00000000fed1a000 (reserved) Xen: 00000000fed1b000 - 00000000fed20000 (reserved) Xen: 00000000fee00000 - 00000000fee01000 (reserved) Xen: 00000000ffd00000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 000000016e713000 (usable) DMI 2.6 present. last_pfn = 0x16e713 max_arch_pfn = 0x400000000 last_pfn = 0xbc000 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bc000000 0000000000 - 00bc000000 page 4k kernel direct mapping tables up to bc000000 @ 100000-6e4000 init_memory_mapping: 0000000100000000-000000016e713000 0100000000 - 016e713000 page 4k kernel direct mapping tables up to 16e713000 @ 2be2000-375d000 RAMDISK: 01884000 - 02051400 ACPI: RSDP 00000000000f2ae0 00024 (v02 HPQOEM) ACPI: XSDT 00000000bbffe120 00094 (v01 HPQOEM SLIC-MPC 0000000F 01000013) ACPI: FACP 00000000bbffc000 000F4 (v03 HPQOEM 1520 0000000F HP 00000001) ACPI: DSDT 00000000bbfdb000 1BCEC (v02 HPQOEM 1520 00000001 INTL 20060912) ACPI: FACS 00000000bbf41000 00040 ACPI: HPET 00000000bbffb000 00038 (v01 HPQOEM 1520 00000001 HP 00000001) ACPI: APIC 00000000bbffa000 000BC (v01 HPQOEM 1520 00000001 HP 00000001) ACPI: MCFG 00000000bbff9000 0003C (v01 HPQOEM 1520 00000001 HP 00000001) ACPI: TCPA 00000000bbff7000 00032 (v02 HPQOEM 1520 00000000 HP 00000001) ACPI: SSDT 00000000bbfd8000 00135 (v01 HPQOEM SataAhci 00001000 INTL 20060912) ACPI: SSDT 00000000bbfd7000 00314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912) ACPI: SLIC 00000000bbfd6000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: SSDT 00000000bbfd2000 02566 (v01 HPQOEM NVIDIAGF 00000001 INTL 20060912) ACPI: 00000000bbfd1000 00068 (v01 INTEL CP_FIELD 00000001 INTL 00000001) ACPI: SSDT 00000000bbfd0000 00A10 (v01 PmRef CpuPm 00003000 INTL 20060912) ACPI: SSDT 00000000bbfcf000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912) ACPI: SSDT 00000000bbfce000 00225 (v01 PmRef ApTst 00003000 INTL 20060912) ACPI: ASF! 00000000bbff8000 000A0 (v32 HPQOEM 1520 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000016e713000 Bootmem setup node 0 0000000000000000-000000016e713000 NODE_DATA [0000000000001000 - 0000000000005fff] bootmap [0000000000008000 - 0000000000035ce7] pages 2e (9 early reservations) ==> bootmem [0000000000 - 016e713000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0002bc7000 - 0002be2000] XEN PAGETABLES ==> [0002bc7000 - 0002be2000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #3 [0001000000 - 0001863170] TEXT DATA BSS ==> [0001000000 - 0001863170] #4 [0001884000 - 0002051400] RAMDISK ==> [0001884000 - 0002051400] #5 [0002052000 - 0002bc7000] XEN START INFO ==> [0002052000 - 0002bc7000] #6 [0001864000 - 0001864229] BRK ==> [0001864000 - 0001864229] #7 [0000100000 - 00006c6000] PGTABLE ==> [0000100000 - 00006c6000] #8 [0002be2000 - 0002f58000] PGTABLE ==> [0002be2000 - 0002f58000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0016e713 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bbdd4 0: 0x000bbfff -> 0x000bc000 0: 0x00100000 -> 0x0016e713 On node 0 totalpages: 1221767 DMA zone: 56 pages used for memmap DMA zone: 1481 pages reserved DMA zone: 2462 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 751117 pages, LIFO batch:31 Normal zone: 6185 pages used for memmap Normal zone: 446186 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 00000000bbdd4000 - 00000000bbec2000 PM: Registered nosave memory: 00000000bbec2000 - 00000000bbfc2000 PM: Registered nosave memory: 00000000bbfc2000 - 00000000bbfff000 PM: Registered nosave memory: 00000000bc000000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 PM: Registered nosave memory: 00000000fed14000 - 00000000fed19000 PM: Registered nosave memory: 00000000fed19000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000 PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffd00000 PM: Registered nosave memory: 00000000ffd00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Allocated 22 4k pages, static data 89056 bytes trying to map vcpu_info 0 at ffffc9000000b020, mfn 192dc2, offset 32 cpu 0 using vcpu_info at ffffc9000000b020 trying to map vcpu_info 1 at ffffc90000023020, mfn 192dd8, offset 32 cpu 1 using vcpu_info at ffffc90000023020 trying to map vcpu_info 2 at ffffc9000003b020, mfn 192dee, offset 32 cpu 2 using vcpu_info at ffffc9000003b020 trying to map vcpu_info 3 at ffffc90000053020, mfn 192a04, offset 32 cpu 3 using vcpu_info at ffffc90000053020 trying to map vcpu_info 4 at ffffc9000006b020, mfn 192a1a, offset 32 cpu 4 using vcpu_info at ffffc9000006b020 trying to map vcpu_info 5 at ffffc90000083020, mfn 192a30, offset 32 cpu 5 using vcpu_info at ffffc90000083020 trying to map vcpu_info 6 at ffffc9000009b020, mfn 192a46, offset 32 cpu 6 using vcpu_info at ffffc9000009b020 trying to map vcpu_info 7 at ffffc900000b3020, mfn 192a5c, offset 32 cpu 7 using vcpu_info at ffffc900000b3020 Xen: using vcpu_info placement Built 1 zonelists in Node order, mobility grouping on. Total pages: 1199765 Policy zone: Normal Kernel command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1 PID hash table entries: 4096 (order: 12, 32768 bytes) Initializing CPU#0 PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB) xen_swiotlb_fixup: buf=ffff880020000000 size=67108864 xen_swiotlb_fixup: buf=ffff880024060000 size=32768 Placing 64MB Xen software IO TLB between ffff880020000000 - ffff880024000000 Xen software IO TLB at phys 0x20000000 - 0x24000000 Memory: 4714016k/6003788k available (3831k kernel code, 1116720k absent, 173052k reserved, 2628k data, 616k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. NR_IRQS:2304 xen: registering gsi 0 triggering 1 polarity 0 xen: --> irq=0 xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0 xen: registering gsi 1 triggering 1 polarity 0 xen: --> irq=1 xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0 xen_setup_pirqs: IRQ: 2 bus_irq != global_irq! xen: registering gsi 2 triggering 0 polarity 0 xen: --> irq=2 xen_set_ioapic_routing: irq 2 gsi 2 vector 2 ioapic 0 pin 2 triggering 1 polarity 0 xen: registering gsi 3 triggering 1 polarity 0 xen: --> irq=3 xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3 triggering 0 polarity 0 xen: registering gsi 4 triggering 1 polarity 0 xen: --> irq=4 xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0 xen: registering gsi 5 triggering 1 polarity 0 xen: --> irq=5 xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5 triggering 0 polarity 0 xen: registering gsi 6 triggering 1 polarity 0 xen: --> irq=6 xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0 xen: registering gsi 7 triggering 1 polarity 0 xen: --> irq=7 xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7 triggering 0 polarity 0 xen: registering gsi 8 triggering 1 polarity 0 xen: --> irq=8 xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0 xen: registering gsi 9 triggering 0 polarity 0 xen: --> irq=9 xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9 triggering 1 polarity 0 xen: registering gsi 10 triggering 1 polarity 0 xen: --> irq=10 xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin 10 triggering 0 polarity 0 xen: registering gsi 11 triggering 1 polarity 0 xen: --> irq=11 xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin 11 triggering 0 polarity 0 xen: registering gsi 12 triggering 1 polarity 0 xen: --> irq=12 xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0 xen: registering gsi 13 triggering 1 polarity 0 xen: --> irq=13 xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0 xen: registering gsi 14 triggering 1 polarity 0 xen: --> irq=14 xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin 14 triggering 0 polarity 0 xen: registering gsi 15 triggering 1 polarity 0 xen: --> irq=15 xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin 15 triggering 0 polarity 0 Detected 1729.041 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [hvc0] enabled console [ttyS0] enabled Linux version 2.6.31.13-xen (root@localhost.localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #3 SMP Tue Jul 13 12:30:31 CDT 2010 Command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed xen_release_chunk: looking at area pfn f0000-fec00: 60416 pages freed xen_release_chunk: looking at area pfn fec01-fed10: 271 pages freed xen_release_chunk: looking at area pfn fed14-fed19: 5 pages freed xen_release_chunk: looking at area pfn fed1a-fed1b: 1 pages freed xen_release_chunk: looking at area pfn fed20-fee00: 224 pages freed xen_release_chunk: looking at area pfn fee01-ffd00: 3839 pages freed released 195828 pages of unused memory BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009fc00 (usable) Xen: 000000000009fc00 - 0000000000100000 (reserved) Xen: 0000000000100000 - 00000000bbdd4000 (usable) Xen: 00000000bbdd4000 - 00000000bbec2000 (reserved) Xen: 00000000bbec2000 - 00000000bbfc2000 (ACPI NVS) Xen: 00000000bbfc2000 - 00000000bbfff000 (ACPI data) Xen: 00000000bbfff000 - 00000000bc000000 (usable) Xen: 00000000bc000000 - 00000000c0000000 (reserved) Xen: 00000000e0000000 - 00000000f0000000 (reserved) Xen: 00000000fec00000 - 00000000fec01000 (reserved) Xen: 00000000fed10000 - 00000000fed14000 (reserved) Xen: 00000000fed19000 - 00000000fed1a000 (reserved) Xen: 00000000fed1b000 - 00000000fed20000 (reserved) Xen: 00000000fee00000 - 00000000fee01000 (reserved) Xen: 00000000ffd00000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 000000016e713000 (usable) DMI 2.6 present. last_pfn = 0x16e713 max_arch_pfn = 0x400000000 last_pfn = 0xbc000 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bc000000 0000000000 - 00bc000000 page 4k kernel direct mapping tables up to bc000000 @ 100000-6e4000 init_memory_mapping: 0000000100000000-000000016e713000 0100000000 - 016e713000 page 4k kernel direct mapping tables up to 16e713000 @ 2be2000-375d000 RAMDISK: 01884000 - 02051400 ACPI: RSDP 00000000000f2ae0 00024 (v02 HPQOEM) ACPI: XSDT 00000000bbffe120 00094 (v01 HPQOEM SLIC-MPC 0000000F 01000013) ACPI: FACP 00000000bbffc000 000F4 (v03 HPQOEM 1520 0000000F HP 00000001) ACPI: DSDT 00000000bbfdb000 1BCEC (v02 HPQOEM 1520 00000001 INTL 20060912) ACPI: FACS 00000000bbf41000 00040 ACPI: HPET 00000000bbffb000 00038 (v01 HPQOEM 1520 00000001 HP 00000001) ACPI: APIC 00000000bbffa000 000BC (v01 HPQOEM 1520 00000001 HP 00000001) ACPI: MCFG 00000000bbff9000 0003C (v01 HPQOEM 1520 00000001 HP 00000001) ACPI: TCPA 00000000bbff7000 00032 (v02 HPQOEM 1520 00000000 HP 00000001) ACPI: SSDT 00000000bbfd8000 00135 (v01 HPQOEM SataAhci 00001000 INTL 20060912) ACPI: SSDT 00000000bbfd7000 00314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912) ACPI: SLIC 00000000bbfd6000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: SSDT 00000000bbfd2000 02566 (v01 HPQOEM NVIDIAGF 00000001 INTL 20060912) ACPI: 00000000bbfd1000 00068 (v01 INTEL CP_FIELD 00000001 INTL 00000001) ACPI: SSDT 00000000bbfd0000 00A10 (v01 PmRef CpuPm 00003000 INTL 20060912) ACPI: SSDT 00000000bbfcf000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912) ACPI: SSDT 00000000bbfce000 00225 (v01 PmRef ApTst 00003000 INTL 20060912) ACPI: ASF! 00000000bbff8000 000A0 (v32 HPQOEM 1520 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000016e713000 Bootmem setup node 0 0000000000000000-000000016e713000 NODE_DATA [0000000000001000 - 0000000000005fff] bootmap [0000000000008000 - 0000000000035ce7] pages 2e (9 early reservations) ==> bootmem [0000000000 - 016e713000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0002bc7000 - 0002be2000] XEN PAGETABLES ==> [0002bc7000 - 0002be2000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #3 [0001000000 - 0001863170] TEXT DATA BSS ==> [0001000000 - 0001863170] #4 [0001884000 - 0002051400] RAMDISK ==> [0001884000 - 0002051400] #5 [0002052000 - 0002bc7000] XEN START INFO ==> [0002052000 - 0002bc7000] #6 [0001864000 - 0001864229] BRK ==> [0001864000 - 0001864229] #7 [0000100000 - 00006c6000] PGTABLE ==> [0000100000 - 00006c6000] #8 [0002be2000 - 0002f58000] PGTABLE ==> [0002be2000 - 0002f58000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0016e713 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bbdd4 0: 0x000bbfff -> 0x000bc000 0: 0x00100000 -> 0x0016e713 On node 0 totalpages: 1221767 DMA zone: 56 pages used for memmap DMA zone: 1481 pages reserved DMA zone: 2462 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 751117 pages, LIFO batch:31 Normal zone: 6185 pages used for memmap Normal zone: 446186 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 00000000bbdd4000 - 00000000bbec2000 PM: Registered nosave memory: 00000000bbec2000 - 00000000bbfc2000 PM: Registered nosave memory: 00000000bbfc2000 - 00000000bbfff000 PM: Registered nosave memory: 00000000bc000000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 PM: Registered nosave memory: 00000000fed14000 - 00000000fed19000 PM: Registered nosave memory: 00000000fed19000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000 PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffd00000 PM: Registered nosave memory: 00000000ffd00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Allocated 22 4k pages, static data 89056 bytes trying to map vcpu_info 0 at ffffc9000000b020, mfn 192dc2, offset 32 cpu 0 using vcpu_info at ffffc9000000b020 trying to map vcpu_info 1 at ffffc90000023020, mfn 192dd8, offset 32 cpu 1 using vcpu_info at ffffc90000023020 trying to map vcpu_info 2 at ffffc9000003b020, mfn 192dee, offset 32 cpu 2 using vcpu_info at ffffc9000003b020 trying to map vcpu_info 3 at ffffc90000053020, mfn 192a04, offset 32 cpu 3 using vcpu_info at ffffc90000053020 trying to map vcpu_info 4 at ffffc9000006b020, mfn 192a1a, offset 32 cpu 4 using vcpu_info at ffffc9000006b020 trying to map vcpu_info 5 at ffffc90000083020, mfn 192a30, offset 32 cpu 5 using vcpu_info at ffffc90000083020 trying to map vcpu_info 6 at ffffc9000009b020, mfn 192a46, offset 32 cpu 6 using vcpu_info at ffffc9000009b020 trying to map vcpu_info 7 at ffffc900000b3020, mfn 192a5c, offset 32 cpu 7 using vcpu_info at ffffc900000b3020 Xen: using vcpu_info placement Built 1 zonelists in Node order, mobility grouping on. Total pages: 1199765 Policy zone: Normal Kernel command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1 PID hash table entries: 4096 (order: 12, 32768 bytes) Initializing CPU#0 PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB) xen_swiotlb_fixup: buf=ffff880020000000 size=67108864 xen_swiotlb_fixup: buf=ffff880024060000 size=32768 Placing 64MB Xen software IO TLB between ffff880020000000 - ffff880024000000 Xen software IO TLB at phys 0x20000000 - 0x24000000 Memory: 4714016k/6003788k available (3831k kernel code, 1116720k absent, 173052k reserved, 2628k data, 616k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. NR_IRQS:2304 xen: registering gsi 0 triggering 1 polarity 0 xen: --> irq=0 xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0 xen: registering gsi 1 triggering 1 polarity 0 xen: --> irq=1 xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0 xen_setup_pirqs: IRQ: 2 bus_irq != global_irq! xen: registering gsi 2 triggering 0 polarity 0 xen: --> irq=2 xen_set_ioapic_routing: irq 2 gsi 2 vector 2 ioapic 0 pin 2 triggering 1 polarity 0 xen: registering gsi 3 triggering 1 polarity 0 xen: --> irq=3 xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3 triggering 0 polarity 0 xen: registering gsi 4 triggering 1 polarity 0 xen: --> irq=4 xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0 xen: registering gsi 5 triggering 1 polarity 0 xen: --> irq=5 xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5 triggering 0 polarity 0 xen: registering gsi 6 triggering 1 polarity 0 xen: --> irq=6 xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0 xen: registering gsi 7 triggering 1 polarity 0 xen: --> irq=7 xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7 triggering 0 polarity 0 xen: registering gsi 8 triggering 1 polarity 0 xen: --> irq=8 xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0 xen: registering gsi 9 triggering 0 polarity 0 xen: --> irq=9 xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9 triggering 1 polarity 0 xen: registering gsi 10 triggering 1 polarity 0 xen: --> irq=10 xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin 10 triggering 0 polarity 0 xen: registering gsi 11 triggering 1 polarity 0 xen: --> irq=11 xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin 11 triggering 0 polarity 0 xen: registering gsi 12 triggering 1 polarity 0 xen: --> irq=12 xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0 xen: registering gsi 13 triggering 1 polarity 0 xen: --> irq=13 xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0 xen: registering gsi 14 triggering 1 polarity 0 xen: --> irq=14 xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin 14 triggering 0 polarity 0 xen: registering gsi 15 triggering 1 polarity 0 xen: --> irq=15 xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin 15 triggering 0 polarity 0 Detected 1729.041 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [hvc0] enabled console [ttyS0] enabled Xen: using vcpuop timer interface installing Xen timer for CPU 0 xen: vcpu_time_info placement not supported Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.08 BogoMIPS (lpj=1729041) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 0/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks Performance Counters: unsupported p6 CPU model 30 no PMU driver, software counters only. SMP alternatives: switching to UP code ACPI: Core revision 20090521 calling migration_init+0x0/0x80 @ 1 initcall migration_init+0x0/0x80 returned 1 after 976 usecs initcall migration_init+0x0/0x80 returned with error code 1 calling spawn_ksoftirqd+0x0/0x7a @ 1 initcall spawn_ksoftirqd+0x0/0x7a returned 0 after 976 usecs calling init_call_single_data+0x0/0xa8 @ 1 initcall init_call_single_data+0x0/0xa8 returned 0 after 0 usecs calling spawn_softlockup_task+0x0/0x96 @ 1 initcall spawn_softlockup_task+0x0/0x96 returned 0 after 976 usecs calling relay_init+0x0/0x3c @ 1 initcall relay_init+0x0/0x3c returned 0 after 0 usecs calling tracer_alloc_buffers+0x0/0x18c @ 1 initcall tracer_alloc_buffers+0x0/0x18c returned 0 after 0 usecs calling init_trace_printk+0x0/0x39 @ 1 initcall init_trace_printk+0x0/0x39 returned 0 after 0 usecs installing Xen timer for CPU 1 SMP alternatives: switching to SMP code Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 1/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks installing Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 2/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks installing Xen timer for CPU 3 Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 3/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks installing Xen timer for CPU 4 Initializing CPU#4 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 4/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks installing Xen timer for CPU 5 Initializing CPU#5 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 5/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks installing Xen timer for CPU 6 Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 6/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks installing Xen timer for CPU 7 Initializing CPU#7 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 7/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks Brought up 8 CPUs CPU0 attaching sched-domain: domain 0: span 0-7 level CPU groups: 0 1 2 3 4 5 6 7 CPU1 attaching sched-domain: domain 0: span 0-7 level CPU groups: 1 2 3 4 5 6 7 0 CPU2 attaching sched-domain: domain 0: span 0-7 level CPU groups: 2 3 4 5 6 7 0 1 CPU3 attaching sched-domain: domain 0: span 0-7 level CPU groups: 3 4 5 6 7 0 1 2 CPU4 attaching sched-domain: domain 0: span 0-7 level CPU groups: 4 5 6 7 0 1 2 3 CPU5 attaching sched-domain: domain 0: span 0-7 level CPU groups: 5 6 7 0 1 2 3 4 CPU6 attaching sched-domain: domain 0: span 0-7 level CPU groups: 6 7 0 1 2 3 4 5 CPU7 attaching sched-domain: domain 0: span 0-7 level CPU groups: 7 0 1 2 3 4 5 6 calling init_mmap_min_addr+0x0/0x4e @ 1 initcall init_mmap_min_addr+0x0/0x4e returned 0 after 0 usecs calling init_cpufreq_transition_notifier_list+0x0/0x43 @ 1 initcall init_cpufreq_transition_notifier_list+0x0/0x43 returned 0 after 976 usecs calling net_ns_init+0x0/0x162 @ 1 initcall net_ns_init+0x0/0x162 returned 0 after 0 usecs calling e820_mark_nvs_memory+0x0/0x65 @ 1 initcall e820_mark_nvs_memory+0x0/0x65 returned 0 after 976 usecs calling cpufreq_tsc+0x0/0x28 @ 1 initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs calling pci_reboot_init+0x0/0x3c @ 1 initcall pci_reboot_init+0x0/0x3c returned 0 after 0 usecs calling init_lapic_sysfs+0x0/0x67 @ 1 initcall init_lapic_sysfs+0x0/0x67 returned 0 after 976 usecs calling print_banner+0x0/0xe @ 1 Booting paravirtualized kernel on Xen Xen version: 4.0.0 (preserve-AD) (dom0) initcall print_banner+0x0/0xe returned 0 after 976 usecs calling alloc_frozen_cpus+0x0/0x2e @ 1 initcall alloc_frozen_cpus+0x0/0x2e returned 0 after 0 usecs calling sysctl_init+0x0/0x3e @ 1 initcall sysctl_init+0x0/0x3e returned 0 after 0 usecs calling ksysfs_init+0x0/0xe1 @ 1 initcall ksysfs_init+0x0/0xe1 returned 0 after 0 usecs calling async_init+0x0/0x80 @ 1 initcall async_init+0x0/0x80 returned 0 after 976 usecs calling init_jiffies_clocksource+0x0/0x39 @ 1 initcall init_jiffies_clocksource+0x0/0x39 returned 0 after 0 usecs calling pm_init+0x0/0x70 @ 1 initcall pm_init+0x0/0x70 returned 0 after 0 usecs calling pm_disk_init+0x0/0x40 @ 1 initcall pm_disk_init+0x0/0x40 returned 0 after 0 usecs calling swsusp_header_init+0x0/0x54 @ 1 initcall swsusp_header_init+0x0/0x54 returned 0 after 0 usecs calling filelock_init+0x0/0x56 @ 1 initcall filelock_init+0x0/0x56 returned 0 after 976 usecs calling init_misc_binfmt+0x0/0x64 @ 1 initcall init_misc_binfmt+0x0/0x64 returned 0 after 0 usecs calling init_script_binfmt+0x0/0x3b @ 1 initcall init_script_binfmt+0x0/0x3b returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x3b @ 1 initcall init_elf_binfmt+0x0/0x3b returned 0 after 0 usecs calling init_compat_elf_binfmt+0x0/0x3b @ 1 initcall init_compat_elf_binfmt+0x0/0x3b returned 0 after 0 usecs calling debugfs_init+0x0/0x7b @ 1 initcall debugfs_init+0x0/0x7b returned 0 after 0 usecs calling securityfs_init+0x0/0x72 @ 1 initcall securityfs_init+0x0/0x72 returned 0 after 0 usecs calling random32_init+0x0/0xf6 @ 1 initcall random32_init+0x0/0xf6 returned 0 after 0 usecs calling gnttab_init+0x0/0x1fa @ 1 Grant tables using version 2 layout. Grant table initialized initcall gnttab_init+0x0/0x1fa returned 0 after 1952 usecs calling cpufreq_core_init+0x0/0x98 @ 1 initcall cpufreq_core_init+0x0/0x98 returned 0 after 0 usecs calling cpuidle_init+0x0/0x61 @ 1 initcall cpuidle_init+0x0/0x61 returned 0 after 0 usecs calling sock_init+0x0/0x86 @ 1 initcall sock_init+0x0/0x86 returned 0 after 976 usecs calling netpoll_init+0x0/0x58 @ 1 initcall netpoll_init+0x0/0x58 returned 0 after 0 usecs calling netlink_proto_init+0x0/0x1ce @ 1 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x1ce returned 0 after 976 usecs calling bdi_class_init+0x0/0x69 @ 1 initcall bdi_class_init+0x0/0x69 returned 0 after 976 usecs calling kobject_uevent_init+0x0/0x7c @ 1 initcall kobject_uevent_init+0x0/0x7c returned 0 after 976 usecs calling pcibus_class_init+0x0/0x40 @ 1 initcall pcibus_class_init+0x0/0x40 returned 0 after 976 usecs calling pci_driver_init+0x0/0x39 @ 1 initcall pci_driver_init+0x0/0x39 returned 0 after 976 usecs calling backlight_class_init+0x0/0x85 @ 1 initcall backlight_class_init+0x0/0x85 returned 0 after 976 usecs calling xenbus_probe_init+0x0/0x27c @ 1 xenbus_probe_init ok initcall xenbus_probe_init+0x0/0x27c returned 0 after 976 usecs calling tty_class_init+0x0/0x59 @ 1 initcall tty_class_init+0x0/0x59 returned 0 after 976 usecs calling vtconsole_class_init+0x0/0xe5 @ 1 initcall vtconsole_class_init+0x0/0xe5 returned 0 after 976 usecs calling register_node_type+0x0/0x88 @ 1 initcall register_node_type+0x0/0x88 returned 0 after 976 usecs calling amd_postcore_init+0x0/0x83f @ 1 initcall amd_postcore_init+0x0/0x83f returned 0 after 0 usecs calling arch_kdebugfs_init+0x0/0x4c @ 1 initcall arch_kdebugfs_init+0x0/0x4c returned 0 after 0 usecs calling mtrr_if_init+0x0/0x8b @ 1 initcall mtrr_if_init+0x0/0x8b returned 0 after 0 usecs calling ffh_cstate_init+0x0/0x52 @ 1 initcall ffh_cstate_init+0x0/0x52 returned 0 after 976 usecs calling acpi_pci_init+0x0/0x7d @ 1 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered initcall acpi_pci_init+0x0/0x7d returned 0 after 976 usecs calling register_xen_pci_notifier+0x0/0x60 @ 1 initcall register_xen_pci_notifier+0x0/0x60 returned 0 after 0 usecs calling setup_vcpu_hotplug_event+0x0/0x4a @ 1 initcall setup_vcpu_hotplug_event+0x0/0x4a returned 0 after 0 usecs calling dmi_id_init+0x0/0x35e @ 1 initcall dmi_id_init+0x0/0x35e returned 0 after 976 usecs calling pci_arch_init+0x0/0x81 @ 1 PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access initcall pci_arch_init+0x0/0x81 returned 0 after 41985 usecs calling topology_init+0x0/0xa7 @ 1 initcall topology_init+0x0/0xa7 returned 0 after 976 usecs calling mtrr_init_finialize+0x0/0x65 @ 1 initcall mtrr_init_finialize+0x0/0x65 returned 0 after 0 usecs calling param_sysfs_init+0x0/0x22e @ 1 initcall param_sysfs_init+0x0/0x22e returned 0 after 5858 usecs calling pm_sysrq_init+0x0/0x41 @ 1 initcall pm_sysrq_init+0x0/0x41 returned 0 after 0 usecs calling audit_watch_init+0x0/0x57 @ 1 initcall audit_watch_init+0x0/0x57 returned 0 after 0 usecs calling init_slow_work+0x0/0x69 @ 1 initcall init_slow_work+0x0/0x69 returned 0 after 0 usecs calling default_bdi_init+0x0/0x5a @ 1 initcall default_bdi_init+0x0/0x5a returned 0 after 976 usecs calling init_bio+0x0/0x14f @ 1 bio: create slab <bio-0> at 0 initcall init_bio+0x0/0x14f returned 0 after 976 usecs calling fsnotify_init+0x0/0x39 @ 1 initcall fsnotify_init+0x0/0x39 returned 0 after 976 usecs calling fsnotify_notification_init+0x0/0x90 @ 1 initcall fsnotify_notification_init+0x0/0x90 returned 0 after 976 usecs calling cryptomgr_init+0x0/0x39 @ 1 initcall cryptomgr_init+0x0/0x39 returned 0 after 0 usecs calling blk_settings_init+0x0/0x52 @ 1 initcall blk_settings_init+0x0/0x52 returned 0 after 0 usecs calling blk_ioc_init+0x0/0x52 @ 1 initcall blk_ioc_init+0x0/0x52 returned 0 after 976 usecs calling blk_softirq_init+0x0/0x8f @ 1 initcall blk_softirq_init+0x0/0x8f returned 0 after 0 usecs calling genhd_device_init+0x0/0x9e @ 1 initcall genhd_device_init+0x0/0x9e returned 0 after 976 usecs calling pci_slot_init+0x0/0x6d @ 1 initcall pci_slot_init+0x0/0x6d returned 0 after 0 usecs calling fbmem_init+0x0/0xb9 @ 1 initcall fbmem_init+0x0/0xb9 returned 0 after 976 usecs calling acpi_init+0x0/0x27f @ 1 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8102f6cf>] add_pin_to_irq_node+0x24/0xaf PGD 0 Oops: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.31.13-xen #3 HP EliteBook 8740w RIP: e030:[<ffffffff8102f6cf>] [<ffffffff8102f6cf>] add_pin_to_irq_node+0x24/0xaf RSP: e02b:ffff88016d4b1d90 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000009 RCX: 0000000000000009 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 R10: 000000000000000f R11: 0000000000000002 R12: 0000000000000009 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000009 FS: 0000000000000000(0000) GS:ffffc90000000000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff88016d4b0000, task ffff88016d4a8000) Stack: ffff88016d688f50 ffffffff811699c1 000000006d1e3e68 0000000000000009 <0> 0000000000000000 0000000000000001 ffffffff8156b900 ffffffff81030e36 <0> ffffffffffffffff 0000000000000049 000000006d1e3e68 0000000000000009 Call Trace: [<ffffffff811699c1>] ? internal_create_group+0xf4/0x174 [<ffffffff81030e36>] ? setup_IO_APIC_irq_extra+0xcd/0x153 [<ffffffff8121c4ba>] ? acpi_ev_sci_xrupt_handler+0x0/0x4a [<ffffffff8102a863>] ? acpi_gsi_to_irq+0x24/0x40 [<ffffffff8120aa37>] ? acpi_os_install_interrupt_handler+0x36/0xbd [<ffffffff8169468b>] ? acpi_init+0x0/0x27f [<ffffffff8121b89e>] ? acpi_ev_install_xrupt_handlers+0x1a/0x79 [<ffffffff8169468b>] ? acpi_init+0x0/0x27f [<ffffffff8169470b>] ? acpi_init+0x80/0x27f [<ffffffff8169468b>] ? acpi_init+0x0/0x27f [<ffffffff81076dd5>] ? ktime_get+0x1c/0x66 [<ffffffff8169468b>] ? acpi_init+0x0/0x27f [<ffffffff8100a092>] ? do_one_initcall+0x64/0x17c [<ffffffff816677a8>] ? kernel_init+0x14f/0x1be [<ffffffff81014fea>] ? child_rip+0xa/0x20 [<ffffffff810141a7>] ? int_ret_from_sys_call+0x7/0x1b [<ffffffff8101495d>] ? retint_restore_args+0x5/0x6 [<ffffffff81014fe0>] ? child_rip+0x0/0x20 Code: 5b 5d 41 5c 41 5d c3 41 55 49 89 fd 89 f7 41 54 41 89 cc 55 89 d5 53 48 83 ec 18 65 48 8b 04 25 28 00 00 00 48 89 44 24 10 31 c0 <49> 8b 5d 00 48 85 db 75 4a e8 35 ff ff ff 48 85 c0 75 2d 48 8b RIP [<ffffffff8102f6cf>] add_pin_to_irq_node+0x24/0xaf RSP <ffff88016d4b1d90> CR2: 0000000000000000 ---[ end trace f17e946d22a56015 ]--- Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: swapper Tainted: G D 2.6.31.13-xen #3 Call Trace: [<ffffffff810581a2>] ? panic+0x96/0x153 [<ffffffff8100f2e2>] ? check_events+0x12/0x20 [<ffffffff813b6ebb>] ? _write_lock_irq+0x1b/0x43 [<ffffffff81064104>] ? exit_ptrace+0x9a/0x119 [<ffffffff813b6ebb>] ? _write_lock_irq+0x1b/0x43 [<ffffffff8105bb09>] ? do_exit+0x82/0x618 [<ffffffff813b8093>] ? oops_end+0xc4/0xe0 [<ffffffff81038d2c>] ? no_context+0x1fe/0x222 [<ffffffff813b73c5>] ? page_fault+0x25/0x30 [<ffffffff8102f6cf>] ? add_pin_to_irq_node+0x24/0xaf [<ffffffff811699c1>] ? internal_create_group+0xf4/0x174 [<ffffffff81030e36>] ? setup_IO_APIC_irq_extra+0xcd/0x153 [<ffffffff8121c4ba>] ? acpi_ev_sci_xrupt_handler+0x0/0x4a [<ffffffff8102a863>] ? acpi_gsi_to_irq+0x24/0x40 [<ffffffff8120aa37>] ? acpi_os_install_interrupt_handler+0x36/0xbd [<ffffffff8169468b>] ? acpi_init+0x0/0x27f [<ffffffff8121b89e>] ? acpi_ev_install_xrupt_handlers+0x1a/0x79 [<ffffffff8169468b>] ? acpi_init+0x0/0x27f [<ffffffff8169470b>] ? acpi_init+0x80/0x27f [<ffffffff8169468b>] ? acpi_init+0x0/0x27f [<ffffffff81076dd5>] ? ktime_get+0x1c/0x66 [<ffffffff8169468b>] ? acpi_init+0x0/0x27f [<ffffffff8100a092>] ? do_one_initcall+0x64/0x17c [<ffffffff816677a8>] ? kernel_init+0x14f/0x1be [<ffffffff81014fea>] ? child_rip+0xa/0x20 [<ffffffff810141a7>] ? int_ret_from_sys_call+0x7/0x1b [<ffffffff8101495d>] ? retint_restore_args+0x5/0x6 [<ffffffff81014fe0>] ? child_rip+0x0/0x20 [-- Attachment #3: Pol1-L.TXT --] [-- Type: text/plain, Size: 52543 bytes --] ^[[0m^[[37m^[[40m^[[2J^[[01;01H^[[=3h^[[2J^[[01;01H^[[2J^[[01;01H^[[=3h^[[2J^[[01;01H __ __ _ _ ___ ___ \ \/ /___ _ __ | || | / _ \ / _ \ \ // _ \ '_ \ | || |_| | | | | | | / \ __/ | | | |__ _| |_| | |_| | /_/\_\___|_| |_| |_|(_)___(_)___/ (XEN) Xen version 4.0.0 (root@localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) Wed Jun 30 16:31:17 CDT 2010 (XEN) Latest ChangeSet: unavailable (XEN) Console output is synchronous. (XEN) Command line: iommu=required loglvl=all guest_loglvl=all sync_console console_to_ring com1=115200,8n1 console=com1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000ef000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000bbdd4000 (usable) (XEN) 00000000bbdd4000 - 00000000bbec2000 (reserved) (XEN) 00000000bbec2000 - 00000000bbfc2000 (ACPI NVS) (XEN) 00000000bbfc2000 - 00000000bbfff000 (ACPI data) (XEN) 00000000bbfff000 - 00000000bc000000 (usable) (XEN) 00000000bc000000 - 00000000c0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 00000000fec01000 (reserved) (XEN) 00000000fed10000 - 00000000fed14000 (reserved) (XEN) 00000000fed19000 - 00000000fed1a000 (reserved) (XEN) 00000000fed1b000 - 00000000fed20000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffd00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 00000001c0000000 (usable) (XEN) ACPI: RSDP 000F2AE0, 0024 (r2 HPQOEM) (XEN) ACPI: XSDT BBFFE120, 0094 (r1 HPQOEM SLIC-MPC F 1000013) (XEN) ACPI: FACP BBFFC000, 00F4 (r3 HPQOEM 1520 F HP 1) (XEN) ACPI: DSDT BBFDB000, 1BCEC (r2 HPQOEM 1520 1 INTL 20060912) (XEN) ACPI: FACS BBF41000, 0040 (XEN) ACPI: HPET BBFFB000, 0038 (r1 HPQOEM 1520 1 HP 1) (XEN) ACPI: APIC BBFFA000, 00BC (r1 HPQOEM 1520 1 HP 1) (XEN) ACPI: MCFG BBFF9000, 003C (r1 HPQOEM 1520 1 HP 1) (XEN) ACPI: TCPA BBFF7000, 0032 (r2 HPQOEM 1520 0 HP 1) (XEN) ACPI: SSDT BBFD8000, 0135 (r1 HPQOEM SataAhci 1000 INTL 20060912) (XEN) ACPI: SSDT BBFD7000, 0314 (r1 HPQOEM PtidDevc 1000 INTL 20060912) (XEN) ACPI: SLIC BBFD6000, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) (XEN) ACPI: SSDT BBFD2000, 2566 (r1 HPQOEM NVIDIAGF 1 INTL 20060912) (XEN) ACPI: DMAR BBFD1000, 0068 (r1 INTEL CP_FIELD 1 INTL 1) (XEN) ACPI: SSDT BBFD0000, 0A10 (r1 PmRef CpuPm 3000 INTL 20060912) (XEN) ACPI: SSDT BBFCF000, 0288 (r1 PmRef Cpu0Tst 3000 INTL 20060912) (XEN) ACPI: SSDT BBFCE000, 0225 (r1 PmRef ApTst 3000 INTL 20060912) (XEN) ACPI: ASF! BBFF8000, 00A0 (r32 HPQOEM 1520 1 HP 1) (XEN) System RAM: 6050MB (6196088kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-00000001c0000000 (XEN) Domain heap initialised (XEN) DMI 2.6 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x408 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0] (XEN) ACPI: wakeup_vec[bbf4100c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) (XEN) Processor #1 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) (XEN) Processor #2 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) (XEN) Processor #3 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) (XEN) Processor #4 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) (XEN) Processor #5 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) (XEN) Processor #6 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) (XEN) Processor #7 7:14 APIC version 21 (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000 (XEN) [VT-D]dmar.c:504: RMRR address range not in reserved memory base = 0 end = fff; iommu_inclusive_mapping=1 parameter may be needed. (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 1729.032 MHz processor. (XEN) Initing memory sharing. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs enabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging detected. (XEN) Intel machine check reporting enabled (XEN) Intel VT-d Snoop Control supported. (XEN) Intel VT-d DMA Passthrough not supported. (XEN) Intel VT-d Queued Invalidation supported. (XEN) Intel VT-d Interrupt Remapping not supported. (XEN) I/O virtualisation enabled (XEN) I/O virtualisation for PV guests disabled (XEN) Total of 8 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) TSC is reliable, synchronization unnecessary (XEN) Platform timer is 14.318MHz HPET ÿ(XEN) Allocated console ring of 64 KiB. (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) microcode.c:73:d32767 microcode: CPU5 resumed (XEN) microcode.c:73:d32767 microcode: CPU4 resumed (XEN) Brought up 8 CPUs (XEN) microcode.c:73:d32767 microcode: CPU7 resumed (XEN) microcode.c:73:d32767 microcode: CPU2 resumed (XEN) microcode.c:73:d32767 microcode: CPU6 resumed (XEN) microcode.c:73:d32767 microcode: CPU3 resumed (XEN) Turbo Mode detected! (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1884000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 00000001b4000000->00000001b8000000 (1484563 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81884000 (XEN) Init. ramdisk: ffffffff81884000->ffffffff82051400 (XEN) Phys-Mach map: ffffffff82052000->ffffffff82bc5898 (XEN) Start info: ffffffff82bc6000->ffffffff82bc64b4 (XEN) Page tables: ffffffff82bc7000->ffffffff82be2000 (XEN) Boot stack: ffffffff82be2000->ffffffff82be3000 (XEN) TOTAL: ffffffff80000000->ffffffff83000000 (XEN) ENTRY ADDRESS: ffffffff81666de0 (XEN) Dom0 has maximum 8 VCPUs (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) ********************************************** (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS (XEN) ******* This option is intended to aid debugging of Xen by ensuring (XEN) ******* that all output is synchronously delivered on the serial line. (XEN) ******* However it can introduce SIGNIFICANT latencies and affect (XEN) ******* timekeeping. It is NOT recommended for production use! (XEN) ********************************************** (XEN) 3... 2... 1... (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 156kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... (XEN) io_apic.c:2290: (XEN) ioapic_guest_write: apic=0, pin=2, irq=0 (XEN) ioapic_guest_write: new_entry=000109f0 (XEN) ioapic_guest_write: old_entry=000009f0 pirq=0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) irq.c:1445: dom0: pirq 0 or irq 3 already mapped (XEN) io_apic.c:2290: (XEN) ioapic_guest_write: apic=0, pin=4, irq=4 (XEN) ioapic_guest_write: new_entry=000109f1 (XEN) ioapic_guest_write: old_entry=000009f1 pirq=0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) irq.c:1445: dom0: pirq 0 or irq 5 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 6 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 7 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 8 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 9 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 10 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 11 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 12 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 13 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 14 already mapped (XEN) irq.c:1445: dom0: pirq 0 or irq 15 already mapped (XEN) allocated vector 21 for irq 16 (XEN) irq.c:1445: dom0: pirq 0 or irq 16 already mapped (XEN) allocated vector 29 for irq 17 (XEN) irq.c:1445: dom0: pirq 0 or irq 17 already mapped (XEN) allocated vector 31 for irq 19 (XEN) irq.c:1445: dom0: pirq 0 or irq 19 already mapped (XEN) allocated vector 39 for irq 20 (XEN) irq.c:1445: dom0: pirq 0 or irq 20 already mapped (XEN) allocated vector 41 for irq 21 (XEN) irq.c:1445: dom0: pirq 0 or irq 21 already mapped (XEN) allocated vector 49 for irq 22 (XEN) irq.c:1445: dom0: pirq 0 or irq 22 already mapped (XEN) allocated vector 51 for irq 23 (XEN) irq.c:1445: dom0: pirq 0 or irq 23 already mapped (XEN) io_apic.c:2290: (XEN) ioapic_guest_write: apic=0, pin=0, irq=0 (XEN) ioapic_guest_write: new_entry=000009f0 (XEN) ioapic_guest_write: old_entry=00010260 pirq=0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) io_apic.c:2290: (XEN) ioapic_guest_write: apic=0, pin=2, irq=0 (XEN) ioapic_guest_write: new_entry=0001a9f0 (XEN) ioapic_guest_write: old_entry=000009f0 pirq=2 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! Linux version 2.6.31.13-xen (root@localhost.localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #4 SMP Tue Jul 13 13:00:24 CDT 2010 Command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed xen_release_chunk: looking at area pfn f0000-fec00: 60416 pages freed xen_release_chunk: looking at area pfn fec01-fed10: 271 pages freed xen_release_chunk: looking at area pfn fed14-fed19: 5 pages freed xen_release_chunk: looking at area pfn fed1a-fed1b: 1 pages freed xen_release_chunk: looking at area pfn fed20-fee00: 224 pages freed xen_release_chunk: looking at area pfn fee01-ffd00: 3839 pages freed released 195828 pages of unused memory BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009fc00 (usable) Xen: 000000000009fc00 - 0000000000100000 (reserved) Xen: 0000000000100000 - 00000000bbdd4000 (usable) Xen: 00000000bbdd4000 - 00000000bbec2000 (reserved) Xen: 00000000bbec2000 - 00000000bbfc2000 (ACPI NVS) Xen: 00000000bbfc2000 - 00000000bbfff000 (ACPI data) Xen: 00000000bbfff000 - 00000000bc000000 (usable) Xen: 00000000bc000000 - 00000000c0000000 (reserved) Xen: 00000000e0000000 - 00000000f0000000 (reserved) Xen: 00000000fec00000 - 00000000fec01000 (reserved) Xen: 00000000fed10000 - 00000000fed14000 (reserved) Xen: 00000000fed19000 - 00000000fed1a000 (reserved) Xen: 00000000fed1b000 - 00000000fed20000 (reserved) Xen: 00000000fee00000 - 00000000fee01000 (reserved) Xen: 00000000ffd00000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 000000016e713000 (usable) DMI 2.6 present. last_pfn = 0x16e713 max_arch_pfn = 0x400000000 last_pfn = 0xbc000 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bc000000 0000000000 - 00bc000000 page 4k kernel direct mapping tables up to bc000000 @ 100000-6e4000 init_memory_mapping: 0000000100000000-000000016e713000 0100000000 - 016e713000 page 4k kernel direct mapping tables up to 16e713000 @ 2be2000-375d000 RAMDISK: 01884000 - 02051400 ACPI: RSDP 00000000000f2ae0 00024 (v02 HPQOEM) ACPI: XSDT 00000000bbffe120 00094 (v01 HPQOEM SLIC-MPC 0000000F 01000013) ACPI: FACP 00000000bbffc000 000F4 (v03 HPQOEM 1520 0000000F HP 00000001) ACPI: DSDT 00000000bbfdb000 1BCEC (v02 HPQOEM 1520 00000001 INTL 20060912) ACPI: FACS 00000000bbf41000 00040 ACPI: HPET 00000000bbffb000 00038 (v01 HPQOEM 1520 00000001 HP 00000001) ACPI: APIC 00000000bbffa000 000BC (v01 HPQOEM 1520 00000001 HP 00000001) ACPI: MCFG 00000000bbff9000 0003C (v01 HPQOEM 1520 00000001 HP 00000001) ACPI: TCPA 00000000bbff7000 00032 (v02 HPQOEM 1520 00000000 HP 00000001) ACPI: SSDT 00000000bbfd8000 00135 (v01 HPQOEM SataAhci 00001000 INTL 20060912) ACPI: SSDT 00000000bbfd7000 00314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912) ACPI: SLIC 00000000bbfd6000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: SSDT 00000000bbfd2000 02566 (v01 HPQOEM NVIDIAGF 00000001 INTL 20060912) ACPI: 00000000bbfd1000 00068 (v01 INTEL CP_FIELD 00000001 INTL 00000001) ACPI: SSDT 00000000bbfd0000 00A10 (v01 PmRef CpuPm 00003000 INTL 20060912) ACPI: SSDT 00000000bbfcf000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912) ACPI: SSDT 00000000bbfce000 00225 (v01 PmRef ApTst 00003000 INTL 20060912) ACPI: ASF! 00000000bbff8000 000A0 (v32 HPQOEM 1520 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000016e713000 Bootmem setup node 0 0000000000000000-000000016e713000 NODE_DATA [0000000000001000 - 0000000000005fff] bootmap [0000000000008000 - 0000000000035ce7] pages 2e (9 early reservations) ==> bootmem [0000000000 - 016e713000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0002bc7000 - 0002be2000] XEN PAGETABLES ==> [0002bc7000 - 0002be2000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #3 [0001000000 - 0001863170] TEXT DATA BSS ==> [0001000000 - 0001863170] #4 [0001884000 - 0002051400] RAMDISK ==> [0001884000 - 0002051400] #5 [0002052000 - 0002bc7000] XEN START INFO ==> [0002052000 - 0002bc7000] #6 [0001864000 - 0001864229] BRK ==> [0001864000 - 0001864229] #7 [0000100000 - 00006c6000] PGTABLE ==> [0000100000 - 00006c6000] #8 [0002be2000 - 0002f58000] PGTABLE ==> [0002be2000 - 0002f58000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0016e713 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bbdd4 0: 0x000bbfff -> 0x000bc000 0: 0x00100000 -> 0x0016e713 On node 0 totalpages: 1221767 DMA zone: 56 pages used for memmap DMA zone: 1481 pages reserved DMA zone: 2462 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 751117 pages, LIFO batch:31 Normal zone: 6185 pages used for memmap Normal zone: 446186 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 00000000bbdd4000 - 00000000bbec2000 PM: Registered nosave memory: 00000000bbec2000 - 00000000bbfc2000 PM: Registered nosave memory: 00000000bbfc2000 - 00000000bbfff000 PM: Registered nosave memory: 00000000bc000000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 PM: Registered nosave memory: 00000000fed14000 - 00000000fed19000 PM: Registered nosave memory: 00000000fed19000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000 PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffd00000 PM: Registered nosave memory: 00000000ffd00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Allocated 22 4k pages, static data 89056 bytes trying to map vcpu_info 0 at ffffc9000000b020, mfn 192dc2, offset 32 cpu 0 using vcpu_info at ffffc9000000b020 trying to map vcpu_info 1 at ffffc90000023020, mfn 192dd8, offset 32 cpu 1 using vcpu_info at ffffc90000023020 trying to map vcpu_info 2 at ffffc9000003b020, mfn 192dee, offset 32 cpu 2 using vcpu_info at ffffc9000003b020 trying to map vcpu_info 3 at ffffc90000053020, mfn 192a04, offset 32 cpu 3 using vcpu_info at ffffc90000053020 trying to map vcpu_info 4 at ffffc9000006b020, mfn 192a1a, offset 32 cpu 4 using vcpu_info at ffffc9000006b020 trying to map vcpu_info 5 at ffffc90000083020, mfn 192a30, offset 32 cpu 5 using vcpu_info at ffffc90000083020 trying to map vcpu_info 6 at ffffc9000009b020, mfn 192a46, offset 32 cpu 6 using vcpu_info at ffffc9000009b020 trying to map vcpu_info 7 at ffffc900000b3020, mfn 192a5c, offset 32 cpu 7 using vcpu_info at ffffc900000b3020 Xen: using vcpu_info placement Built 1 zonelists in Node order, mobility grouping on. Total pages: 1199765 Policy zone: Normal Kernel command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1 PID hash table entries: 4096 (order: 12, 32768 bytes) Initializing CPU#0 PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB) xen_swiotlb_fixup: buf=ffff880020000000 size=67108864 xen_swiotlb_fixup: buf=ffff880024060000 size=32768 Placing 64MB Xen software IO TLB between ffff880020000000 - ffff880024000000 Xen software IO TLB at phys 0x20000000 - 0x24000000 Memory: 4714016k/6003788k available (3831k kernel code, 1116720k absent, 173052k reserved, 2628k data, 616k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. NR_IRQS:2304 xen: registering gsi 0 triggering 1 polarity 0 xen: --> irq=0 xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0 xen: registering gsi 1 triggering 1 polarity 0 xen: --> irq=1 xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0 xen_setup_pirqs: IRQ: 2 bus_irq != global_irq! xen: registering gsi 2 triggering 0 polarity 1 xen: --> irq=2 xen_set_ioapic_routing: irq 2 gsi 2 vector 2 ioapic 0 pin 2 triggering 1 polarity 1 xen: registering gsi 3 triggering 1 polarity 0 xen: --> irq=3 xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3 triggering 0 polarity 0 xen: registering gsi 4 triggering 1 polarity 0 xen: --> irq=4 xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0 xen: registering gsi 5 triggering 1 polarity 0 xen: --> irq=5 xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5 triggering 0 polarity 0 xen: registering gsi 6 triggering 1 polarity 0 xen: --> irq=6 xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0 xen: registering gsi 7 triggering 1 polarity 0 xen: --> irq=7 xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7 triggering 0 polarity 0 xen: registering gsi 8 triggering 1 polarity 0 xen: --> irq=8 xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0 xen: registering gsi 9 triggering 0 polarity 0 xen: --> irq=9 xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9 triggering 1 polarity 0 xen: registering gsi 10 triggering 1 polarity 0 xen: --> irq=10 xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin 10 triggering 0 polarity 0 xen: registering gsi 11 triggering 1 polarity 0 xen: --> irq=11 xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin 11 triggering 0 polarity 0 xen: registering gsi 12 triggering 1 polarity 0 xen: --> irq=12 xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0 xen: registering gsi 13 triggering 1 polarity 0 xen: --> irq=13 xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0 xen: registering gsi 14 triggering 1 polarity 0 xen: --> irq=14 xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin 14 triggering 0 polarity 0 xen: registering gsi 15 triggering 1 polarity 0 xen: --> irq=15 xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin 15 triggering 0 polarity 0 Detected 1729.032 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [hvc0] enabled console [ttyS0] enabled Linux version 2.6.31.13-xen (root@localhost.localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #4 SMP Tue Jul 13 13:00:24 CDT 2010 Command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed xen_release_chunk: looking at area pfn f0000-fec00: 60416 pages freed xen_release_chunk: looking at area pfn fec01-fed10: 271 pages freed xen_release_chunk: looking at area pfn fed14-fed19: 5 pages freed xen_release_chunk: looking at area pfn fed1a-fed1b: 1 pages freed xen_release_chunk: looking at area pfn fed20-fee00: 224 pages freed xen_release_chunk: looking at area pfn fee01-ffd00: 3839 pages freed released 195828 pages of unused memory BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009fc00 (usable) Xen: 000000000009fc00 - 0000000000100000 (reserved) Xen: 0000000000100000 - 00000000bbdd4000 (usable) Xen: 00000000bbdd4000 - 00000000bbec2000 (reserved) Xen: 00000000bbec2000 - 00000000bbfc2000 (ACPI NVS) Xen: 00000000bbfc2000 - 00000000bbfff000 (ACPI data) Xen: 00000000bbfff000 - 00000000bc000000 (usable) Xen: 00000000bc000000 - 00000000c0000000 (reserved) Xen: 00000000e0000000 - 00000000f0000000 (reserved) Xen: 00000000fec00000 - 00000000fec01000 (reserved) Xen: 00000000fed10000 - 00000000fed14000 (reserved) Xen: 00000000fed19000 - 00000000fed1a000 (reserved) Xen: 00000000fed1b000 - 00000000fed20000 (reserved) Xen: 00000000fee00000 - 00000000fee01000 (reserved) Xen: 00000000ffd00000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 000000016e713000 (usable) DMI 2.6 present. last_pfn = 0x16e713 max_arch_pfn = 0x400000000 last_pfn = 0xbc000 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bc000000 0000000000 - 00bc000000 page 4k kernel direct mapping tables up to bc000000 @ 100000-6e4000 init_memory_mapping: 0000000100000000-000000016e713000 0100000000 - 016e713000 page 4k kernel direct mapping tables up to 16e713000 @ 2be2000-375d000 RAMDISK: 01884000 - 02051400 ACPI: RSDP 00000000000f2ae0 00024 (v02 HPQOEM) ACPI: XSDT 00000000bbffe120 00094 (v01 HPQOEM SLIC-MPC 0000000F 01000013) ACPI: FACP 00000000bbffc000 000F4 (v03 HPQOEM 1520 0000000F HP 00000001) ACPI: DSDT 00000000bbfdb000 1BCEC (v02 HPQOEM 1520 00000001 INTL 20060912) ACPI: FACS 00000000bbf41000 00040 ACPI: HPET 00000000bbffb000 00038 (v01 HPQOEM 1520 00000001 HP 00000001) ACPI: APIC 00000000bbffa000 000BC (v01 HPQOEM 1520 00000001 HP 00000001) ACPI: MCFG 00000000bbff9000 0003C (v01 HPQOEM 1520 00000001 HP 00000001) ACPI: TCPA 00000000bbff7000 00032 (v02 HPQOEM 1520 00000000 HP 00000001) ACPI: SSDT 00000000bbfd8000 00135 (v01 HPQOEM SataAhci 00001000 INTL 20060912) ACPI: SSDT 00000000bbfd7000 00314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912) ACPI: SLIC 00000000bbfd6000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: SSDT 00000000bbfd2000 02566 (v01 HPQOEM NVIDIAGF 00000001 INTL 20060912) ACPI: 00000000bbfd1000 00068 (v01 INTEL CP_FIELD 00000001 INTL 00000001) ACPI: SSDT 00000000bbfd0000 00A10 (v01 PmRef CpuPm 00003000 INTL 20060912) ACPI: SSDT 00000000bbfcf000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912) ACPI: SSDT 00000000bbfce000 00225 (v01 PmRef ApTst 00003000 INTL 20060912) ACPI: ASF! 00000000bbff8000 000A0 (v32 HPQOEM 1520 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000016e713000 Bootmem setup node 0 0000000000000000-000000016e713000 NODE_DATA [0000000000001000 - 0000000000005fff] bootmap [0000000000008000 - 0000000000035ce7] pages 2e (9 early reservations) ==> bootmem [0000000000 - 016e713000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0002bc7000 - 0002be2000] XEN PAGETABLES ==> [0002bc7000 - 0002be2000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #3 [0001000000 - 0001863170] TEXT DATA BSS ==> [0001000000 - 0001863170] #4 [0001884000 - 0002051400] RAMDISK ==> [0001884000 - 0002051400] #5 [0002052000 - 0002bc7000] XEN START INFO ==> [0002052000 - 0002bc7000] #6 [0001864000 - 0001864229] BRK ==> [0001864000 - 0001864229] #7 [0000100000 - 00006c6000] PGTABLE ==> [0000100000 - 00006c6000] #8 [0002be2000 - 0002f58000] PGTABLE ==> [0002be2000 - 0002f58000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0016e713 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bbdd4 0: 0x000bbfff -> 0x000bc000 0: 0x00100000 -> 0x0016e713 On node 0 totalpages: 1221767 DMA zone: 56 pages used for memmap DMA zone: 1481 pages reserved DMA zone: 2462 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 751117 pages, LIFO batch:31 Normal zone: 6185 pages used for memmap Normal zone: 446186 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 00000000bbdd4000 - 00000000bbec2000 PM: Registered nosave memory: 00000000bbec2000 - 00000000bbfc2000 PM: Registered nosave memory: 00000000bbfc2000 - 00000000bbfff000 PM: Registered nosave memory: 00000000bc000000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 PM: Registered nosave memory: 00000000fed14000 - 00000000fed19000 PM: Registered nosave memory: 00000000fed19000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000 PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffd00000 PM: Registered nosave memory: 00000000ffd00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Allocated 22 4k pages, static data 89056 bytes trying to map vcpu_info 0 at ffffc9000000b020, mfn 192dc2, offset 32 cpu 0 using vcpu_info at ffffc9000000b020 trying to map vcpu_info 1 at ffffc90000023020, mfn 192dd8, offset 32 cpu 1 using vcpu_info at ffffc90000023020 trying to map vcpu_info 2 at ffffc9000003b020, mfn 192dee, offset 32 cpu 2 using vcpu_info at ffffc9000003b020 trying to map vcpu_info 3 at ffffc90000053020, mfn 192a04, offset 32 cpu 3 using vcpu_info at ffffc90000053020 trying to map vcpu_info 4 at ffffc9000006b020, mfn 192a1a, offset 32 cpu 4 using vcpu_info at ffffc9000006b020 trying to map vcpu_info 5 at ffffc90000083020, mfn 192a30, offset 32 cpu 5 using vcpu_info at ffffc90000083020 trying to map vcpu_info 6 at ffffc9000009b020, mfn 192a46, offset 32 cpu 6 using vcpu_info at ffffc9000009b020 trying to map vcpu_info 7 at ffffc900000b3020, mfn 192a5c, offset 32 cpu 7 using vcpu_info at ffffc900000b3020 Xen: using vcpu_info placement Built 1 zonelists in Node order, mobility grouping on. Total pages: 1199765 Policy zone: Normal Kernel command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1 PID hash table entries: 4096 (order: 12, 32768 bytes) Initializing CPU#0 PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB) xen_swiotlb_fixup: buf=ffff880020000000 size=67108864 xen_swiotlb_fixup: buf=ffff880024060000 size=32768 Placing 64MB Xen software IO TLB between ffff880020000000 - ffff880024000000 Xen software IO TLB at phys 0x20000000 - 0x24000000 Memory: 4714016k/6003788k available (3831k kernel code, 1116720k absent, 173052k reserved, 2628k data, 616k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. NR_IRQS:2304 xen: registering gsi 0 triggering 1 polarity 0 xen: --> irq=0 xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0 xen: registering gsi 1 triggering 1 polarity 0 xen: --> irq=1 xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0 xen_setup_pirqs: IRQ: 2 bus_irq != global_irq! xen: registering gsi 2 triggering 0 polarity 1 xen: --> irq=2 xen_set_ioapic_routing: irq 2 gsi 2 vector 2 ioapic 0 pin 2 triggering 1 polarity 1 xen: registering gsi 3 triggering 1 polarity 0 xen: --> irq=3 xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3 triggering 0 polarity 0 xen: registering gsi 4 triggering 1 polarity 0 xen: --> irq=4 xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0 xen: registering gsi 5 triggering 1 polarity 0 xen: --> irq=5 xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5 triggering 0 polarity 0 xen: registering gsi 6 triggering 1 polarity 0 xen: --> irq=6 xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0 xen: registering gsi 7 triggering 1 polarity 0 xen: --> irq=7 xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7 triggering 0 polarity 0 xen: registering gsi 8 triggering 1 polarity 0 xen: --> irq=8 xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0 xen: registering gsi 9 triggering 0 polarity 0 xen: --> irq=9 xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9 triggering 1 polarity 0 xen: registering gsi 10 triggering 1 polarity 0 xen: --> irq=10 xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin 10 triggering 0 polarity 0 xen: registering gsi 11 triggering 1 polarity 0 xen: --> irq=11 xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin 11 triggering 0 polarity 0 xen: registering gsi 12 triggering 1 polarity 0 xen: --> irq=12 xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0 xen: registering gsi 13 triggering 1 polarity 0 xen: --> irq=13 xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0 xen: registering gsi 14 triggering 1 polarity 0 xen: --> irq=14 xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin 14 triggering 0 polarity 0 xen: registering gsi 15 triggering 1 polarity 0 xen: --> irq=15 xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin 15 triggering 0 polarity 0 Detected 1729.032 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [hvc0] enabled console [ttyS0] enabled Xen: using vcpuop timer interface installing Xen timer for CPU 0 xen: vcpu_time_info placement not supported Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.06 BogoMIPS (lpj=1729032) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 0/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks Performance Counters: unsupported p6 CPU model 30 no PMU driver, software counters only. SMP alternatives: switching to UP code ACPI: Core revision 20090521 calling migration_init+0x0/0x80 @ 1 initcall migration_init+0x0/0x80 returned 1 after 976 usecs initcall migration_init+0x0/0x80 returned with error code 1 calling spawn_ksoftirqd+0x0/0x7a @ 1 initcall spawn_ksoftirqd+0x0/0x7a returned 0 after 976 usecs calling init_call_single_data+0x0/0xa8 @ 1 initcall init_call_single_data+0x0/0xa8 returned 0 after 0 usecs calling spawn_softlockup_task+0x0/0x96 @ 1 initcall spawn_softlockup_task+0x0/0x96 returned 0 after 976 usecs calling relay_init+0x0/0x3c @ 1 initcall relay_init+0x0/0x3c returned 0 after 0 usecs calling tracer_alloc_buffers+0x0/0x18c @ 1 initcall tracer_alloc_buffers+0x0/0x18c returned 0 after 0 usecs calling init_trace_printk+0x0/0x39 @ 1 initcall init_trace_printk+0x0/0x39 returned 0 after 0 usecs installing Xen timer for CPU 1 SMP alternatives: switching to SMP code Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 1/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks installing Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 2/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks installing Xen timer for CPU 3 Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 3/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks installing Xen timer for CPU 4 Initializing CPU#4 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 4/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks installing Xen timer for CPU 5 Initializing CPU#5 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 5/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks installing Xen timer for CPU 6 Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 6/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks installing Xen timer for CPU 7 Initializing CPU#7 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 7/0x0 -> Node 0 CPU: Unsupported number of siblings 16 mce: CPU supports 9 MCE banks Brought up 8 CPUs CPU0 attaching sched-domain: domain 0: span 0-7 level CPU groups: 0 1 2 3 4 5 6 7 CPU1 attaching sched-domain: domain 0: span 0-7 level CPU groups: 1 2 3 4 5 6 7 0 CPU2 attaching sched-domain: domain 0: span 0-7 level CPU groups: 2 3 4 5 6 7 0 1 CPU3 attaching sched-domain: domain 0: span 0-7 level CPU groups: 3 4 5 6 7 0 1 2 CPU4 attaching sched-domain: domain 0: span 0-7 level CPU groups: 4 5 6 7 0 1 2 3 CPU5 attaching sched-domain: domain 0: span 0-7 level CPU groups: 5 6 7 0 1 2 3 4 CPU6 attaching sched-domain: domain 0: span 0-7 level CPU groups: 6 7 0 1 2 3 4 5 CPU7 attaching sched-domain: domain 0: span 0-7 level CPU groups: 7 0 1 2 3 4 5 6 calling init_mmap_min_addr+0x0/0x4e @ 1 initcall init_mmap_min_addr+0x0/0x4e returned 0 after 0 usecs calling init_cpufreq_transition_notifier_list+0x0/0x43 @ 1 initcall init_cpufreq_transition_notifier_list+0x0/0x43 returned 0 after 976 usecs calling net_ns_init+0x0/0x162 @ 1 initcall net_ns_init+0x0/0x162 returned 0 after 0 usecs calling e820_mark_nvs_memory+0x0/0x65 @ 1 initcall e820_mark_nvs_memory+0x0/0x65 returned 0 after 976 usecs calling cpufreq_tsc+0x0/0x28 @ 1 initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs calling pci_reboot_init+0x0/0x3c @ 1 initcall pci_reboot_init+0x0/0x3c returned 0 after 0 usecs calling init_lapic_sysfs+0x0/0x67 @ 1 initcall init_lapic_sysfs+0x0/0x67 returned 0 after 976 usecs calling print_banner+0x0/0xe @ 1 Booting paravirtualized kernel on Xen Xen version: 4.0.0 (preserve-AD) (dom0) initcall print_banner+0x0/0xe returned 0 after 976 usecs calling alloc_frozen_cpus+0x0/0x2e @ 1 initcall alloc_frozen_cpus+0x0/0x2e returned 0 after 0 usecs calling sysctl_init+0x0/0x3e @ 1 initcall sysctl_init+0x0/0x3e returned 0 after 0 usecs calling ksysfs_init+0x0/0xe1 @ 1 initcall ksysfs_init+0x0/0xe1 returned 0 after 0 usecs calling async_init+0x0/0x80 @ 1 initcall async_init+0x0/0x80 returned 0 after 976 usecs calling init_jiffies_clocksource+0x0/0x39 @ 1 initcall init_jiffies_clocksource+0x0/0x39 returned 0 after 0 usecs calling pm_init+0x0/0x70 @ 1 initcall pm_init+0x0/0x70 returned 0 after 0 usecs calling pm_disk_init+0x0/0x40 @ 1 initcall pm_disk_init+0x0/0x40 returned 0 after 0 usecs calling swsusp_header_init+0x0/0x54 @ 1 initcall swsusp_header_init+0x0/0x54 returned 0 after 0 usecs calling filelock_init+0x0/0x56 @ 1 initcall filelock_init+0x0/0x56 returned 0 after 976 usecs calling init_misc_binfmt+0x0/0x64 @ 1 initcall init_misc_binfmt+0x0/0x64 returned 0 after 0 usecs calling init_script_binfmt+0x0/0x3b @ 1 initcall init_script_binfmt+0x0/0x3b returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x3b @ 1 initcall init_elf_binfmt+0x0/0x3b returned 0 after 0 usecs calling init_compat_elf_binfmt+0x0/0x3b @ 1 initcall init_compat_elf_binfmt+0x0/0x3b returned 0 after 0 usecs calling debugfs_init+0x0/0x7b @ 1 initcall debugfs_init+0x0/0x7b returned 0 after 0 usecs calling securityfs_init+0x0/0x72 @ 1 initcall securityfs_init+0x0/0x72 returned 0 after 0 usecs calling random32_init+0x0/0xf6 @ 1 initcall random32_init+0x0/0xf6 returned 0 after 0 usecs calling gnttab_init+0x0/0x1fa @ 1 Grant tables using version 2 layout. Grant table initialized initcall gnttab_init+0x0/0x1fa returned 0 after 1952 usecs calling cpufreq_core_init+0x0/0x98 @ 1 initcall cpufreq_core_init+0x0/0x98 returned 0 after 0 usecs calling cpuidle_init+0x0/0x61 @ 1 initcall cpuidle_init+0x0/0x61 returned 0 after 0 usecs calling sock_init+0x0/0x86 @ 1 initcall sock_init+0x0/0x86 returned 0 after 976 usecs calling netpoll_init+0x0/0x58 @ 1 initcall netpoll_init+0x0/0x58 returned 0 after 0 usecs calling netlink_proto_init+0x0/0x1ce @ 1 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x1ce returned 0 after 976 usecs calling bdi_class_init+0x0/0x69 @ 1 initcall bdi_class_init+0x0/0x69 returned 0 after 976 usecs calling kobject_uevent_init+0x0/0x7c @ 1 initcall kobject_uevent_init+0x0/0x7c returned 0 after 976 usecs calling pcibus_class_init+0x0/0x40 @ 1 initcall pcibus_class_init+0x0/0x40 returned 0 after 976 usecs calling pci_driver_init+0x0/0x39 @ 1 initcall pci_driver_init+0x0/0x39 returned 0 after 976 usecs calling backlight_class_init+0x0/0x85 @ 1 initcall backlight_class_init+0x0/0x85 returned 0 after 976 usecs calling xenbus_probe_init+0x0/0x27c @ 1 xenbus_probe_init ok initcall xenbus_probe_init+0x0/0x27c returned 0 after 976 usecs calling tty_class_init+0x0/0x59 @ 1 initcall tty_class_init+0x0/0x59 returned 0 after 976 usecs calling vtconsole_class_init+0x0/0xe5 @ 1 initcall vtconsole_class_init+0x0/0xe5 returned 0 after 976 usecs calling register_node_type+0x0/0x88 @ 1 initcall register_node_type+0x0/0x88 returned 0 after 976 usecs calling amd_postcore_init+0x0/0x83f @ 1 initcall amd_postcore_init+0x0/0x83f returned 0 after 0 usecs calling arch_kdebugfs_init+0x0/0x4c @ 1 initcall arch_kdebugfs_init+0x0/0x4c returned 0 after 0 usecs calling mtrr_if_init+0x0/0x8b @ 1 initcall mtrr_if_init+0x0/0x8b returned 0 after 0 usecs calling ffh_cstate_init+0x0/0x52 @ 1 initcall ffh_cstate_init+0x0/0x52 returned 0 after 976 usecs calling acpi_pci_init+0x0/0x7d @ 1 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered initcall acpi_pci_init+0x0/0x7d returned 0 after 976 usecs calling register_xen_pci_notifier+0x0/0x60 @ 1 initcall register_xen_pci_notifier+0x0/0x60 returned 0 after 0 usecs calling setup_vcpu_hotplug_event+0x0/0x4a @ 1 initcall setup_vcpu_hotplug_event+0x0/0x4a returned 0 after 0 usecs calling dmi_id_init+0x0/0x35e @ 1 initcall dmi_id_init+0x0/0x35e returned 0 after 976 usecs calling pci_arch_init+0x0/0x81 @ 1 PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access initcall pci_arch_init+0x0/0x81 returned 0 after 41985 usecs calling topology_init+0x0/0xa7 @ 1 initcall topology_init+0x0/0xa7 returned 0 after 976 usecs calling mtrr_init_finialize+0x0/0x65 @ 1 initcall mtrr_init_finialize+0x0/0x65 returned 0 after 0 usecs calling param_sysfs_init+0x0/0x22e @ 1 initcall param_sysfs_init+0x0/0x22e returned 0 after 5858 usecs calling pm_sysrq_init+0x0/0x41 @ 1 initcall pm_sysrq_init+0x0/0x41 returned 0 after 0 usecs calling audit_watch_init+0x0/0x57 @ 1 initcall audit_watch_init+0x0/0x57 returned 0 after 0 usecs calling init_slow_work+0x0/0x69 @ 1 initcall init_slow_work+0x0/0x69 returned 0 after 0 usecs calling default_bdi_init+0x0/0x5a @ 1 initcall default_bdi_init+0x0/0x5a returned 0 after 976 usecs calling init_bio+0x0/0x14f @ 1 bio: create slab <bio-0> at 0 initcall init_bio+0x0/0x14f returned 0 after 976 usecs calling fsnotify_init+0x0/0x39 @ 1 initcall fsnotify_init+0x0/0x39 returned 0 after 976 usecs calling fsnotify_notification_init+0x0/0x90 @ 1 initcall fsnotify_notification_init+0x0/0x90 returned 0 after 976 usecs calling cryptomgr_init+0x0/0x39 @ 1 initcall cryptomgr_init+0x0/0x39 returned 0 after 0 usecs calling blk_settings_init+0x0/0x52 @ 1 initcall blk_settings_init+0x0/0x52 returned 0 after 0 usecs calling blk_ioc_init+0x0/0x52 @ 1 initcall blk_ioc_init+0x0/0x52 returned 0 after 976 usecs calling blk_softirq_init+0x0/0x8f @ 1 initcall blk_softirq_init+0x0/0x8f returned 0 after 0 usecs calling genhd_device_init+0x0/0x9e @ 1 initcall genhd_device_init+0x0/0x9e returned 0 after 976 usecs calling pci_slot_init+0x0/0x6d @ 1 initcall pci_slot_init+0x0/0x6d returned 0 after 0 usecs calling fbmem_init+0x0/0xb9 @ 1 initcall fbmem_init+0x0/0xb9 returned 0 after 976 usecs calling acpi_init+0x0/0x27f @ 1 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8102f6cf>] add_pin_to_irq_node+0x24/0xaf PGD 0 Oops: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.31.13-xen #4 HP EliteBook 8740w RIP: e030:[<ffffffff8102f6cf>] [<ffffffff8102f6cf>] add_pin_to_irq_node+0x24/0xaf RSP: e02b:ffff88016d4b1d90 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000009 RCX: 0000000000000009 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 R10: 000000000000000f R11: 0000000000000002 R12: 0000000000000009 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000009 FS: 0000000000000000(0000) GS:ffffc90000000000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff88016d4b0000, task ffff88016d4a8000) Stack: ffff88016d688f50 ffffffff811699c1 000000001345139a 0000000000000009 <0> 0000000000000000 0000000000000001 ffffffff8156b900 ffffffff81030e36 <0> ffffffffffffffff 0000000000000049 000000001345139a 0000000000000009 Call Trace: [<ffffffff811699c1>] ? internal_create_group+0xf4/0x174 [<ffffffff81030e36>] ? setup_IO_APIC_irq_extra+0xcd/0x153 [<ffffffff8121c4ba>] ? acpi_ev_sci_xrupt_handler+0x0/0x4a [<ffffffff8102a863>] ? acpi_gsi_to_irq+0x24/0x40 [<ffffffff8120aa37>] ? acpi_os_install_interrupt_handler+0x36/0xbd [<ffffffff8169468b>] ? acpi_init+0x0/0x27f [<ffffffff8121b89e>] ? acpi_ev_install_xrupt_handlers+0x1a/0x79 [<ffffffff8169468b>] ? acpi_init+0x0/0x27f [<ffffffff8169470b>] ? acpi_init+0x80/0x27f [<ffffffff8169468b>] ? acpi_init+0x0/0x27f [<ffffffff81076dd5>] ? ktime_get+0x1c/0x66 [<ffffffff8169468b>] ? acpi_init+0x0/0x27f [<ffffffff8100a092>] ? do_one_initcall+0x64/0x17c [<ffffffff816677a8>] ? kernel_init+0x14f/0x1be [<ffffffff81014fea>] ? child_rip+0xa/0x20 [<ffffffff810141a7>] ? int_ret_from_sys_call+0x7/0x1b [<ffffffff8101495d>] ? retint_restore_args+0x5/0x6 [<ffffffff81014fe0>] ? child_rip+0x0/0x20 Code: 5b 5d 41 5c 41 5d c3 41 55 49 89 fd 89 f7 41 54 41 89 cc 55 89 d5 53 48 83 ec 18 65 48 8b 04 25 28 00 00 00 48 89 44 24 10 31 c0 <49> 8b 5d 00 48 85 db 75 4a e8 35 ff ff ff 48 85 c0 75 2d 48 8b RIP [<ffffffff8102f6cf>] add_pin_to_irq_node+0x24/0xaf RSP <ffff88016d4b1d90> CR2: 0000000000000000 ---[ end trace f17e946d22a56015 ]--- Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: swapper Tainted: G D 2.6.31.13-xen #4 Call Trace: [<ffffffff810581a2>] ? panic+0x96/0x153 [<ffffffff8100f2e2>] ? check_events+0x12/0x20 [<ffffffff813b6ebb>] ? _write_lock_irq+0x1b/0x43 [<ffffffff81064104>] ? exit_ptrace+0x9a/0x119 [<ffffffff813b6ebb>] ? _write_lock_irq+0x1b/0x43 [<ffffffff8105bb09>] ? do_exit+0x82/0x618 [<ffffffff813b8093>] ? oops_end+0xc4/0xe0 [<ffffffff81038d2c>] ? no_context+0x1fe/0x222 [<ffffffff813b73c5>] ? page_fault+0x25/0x30 [<ffffffff8102f6cf>] ? add_pin_to_irq_node+0x24/0xaf [<ffffffff811699c1>] ? internal_create_group+0xf4/0x174 [<ffffffff81030e36>] ? setup_IO_APIC_irq_extra+0xcd/0x153 [<ffffffff8121c4ba>] ? acpi_ev_sci_xrupt_handler+0x0/0x4a [<ffffffff8102a863>] ? acpi_gsi_to_irq+0x24/0x40 [<ffffffff8120aa37>] ? acpi_os_install_interrupt_handler+0x36/0xbd [<ffffffff8169468b>] ? acpi_init+0x0/0x27f [<ffffffff8121b89e>] ? acpi_ev_install_xrupt_handlers+0x1a/0x79 [<ffffffff8169468b>] ? acpi_init+0x0/0x27f [<ffffffff8169470b>] ? acpi_init+0x80/0x27f [<ffffffff8169468b>] ? acpi_init+0x0/0x27f [<ffffffff81076dd5>] ? ktime_get+0x1c/0x66 [<ffffffff8169468b>] ? acpi_init+0x0/0x27f [<ffffffff8100a092>] ? do_one_initcall+0x64/0x17c [<ffffffff816677a8>] ? kernel_init+0x14f/0x1be [<ffffffff81014fea>] ? child_rip+0xa/0x20 [<ffffffff810141a7>] ? int_ret_from_sys_call+0x7/0x1b [<ffffffff8101495d>] ? retint_restore_args+0x5/0x6 [<ffffffff81014fe0>] ? child_rip+0x0/0x20 [-- Attachment #4: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot 2010-07-13 18:22 ` Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot ktckd @ 2010-07-13 20:06 ` Konrad Rzeszutek Wilk 2010-07-14 20:47 ` ktckd 0 siblings, 1 reply; 8+ messages in thread From: Konrad Rzeszutek Wilk @ 2010-07-13 20:06 UTC (permalink / raw) To: ktckd; +Cc: xen-devel Oe Tue, Jul 13, 2010 at 01:22:06PM -0500, ktckd wrote: > Thanks for the suggestion. > > However I still see the hang with both 0 and 1 Polarity. > OK, then the next choice is to actually debug what the faulty instructions is. Here are some instructions: http://lists.xensource.com/archives/html/xen-devel/2009-01/msg00599.html Try to get the assmebler code above and below the faulty instruction. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot 2010-07-13 20:06 ` Konrad Rzeszutek Wilk @ 2010-07-14 20:47 ` ktckd 2010-07-15 13:31 ` Konrad Rzeszutek Wilk 0 siblings, 1 reply; 8+ messages in thread From: ktckd @ 2010-07-14 20:47 UTC (permalink / raw) To: Konrad Rzeszutek Wilk; +Cc: xen-devel [-- Attachment #1.1: Type: text/plain, Size: 620 bytes --] Hi Konrad, I am kinda lost with the link you gave me. Can you please give some more specifics? Regards On Tue, Jul 13, 2010 at 3:06 PM, Konrad Rzeszutek Wilk < konrad.wilk@oracle.com> wrote: > Oe Tue, Jul 13, 2010 at 01:22:06PM -0500, ktckd wrote: > > Thanks for the suggestion. > > > > However I still see the hang with both 0 and 1 Polarity. > > > > OK, then the next choice is to actually debug what the faulty > instructions is. > > Here are some instructions: > http://lists.xensource.com/archives/html/xen-devel/2009-01/msg00599.html > > Try to get the assmebler code above and below the faulty instruction. > [-- Attachment #1.2: Type: text/html, Size: 1072 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot 2010-07-14 20:47 ` ktckd @ 2010-07-15 13:31 ` Konrad Rzeszutek Wilk 0 siblings, 0 replies; 8+ messages in thread From: Konrad Rzeszutek Wilk @ 2010-07-15 13:31 UTC (permalink / raw) To: ktckd; +Cc: xen-devel On Wed, Jul 14, 2010 at 03:47:42PM -0500, ktckd wrote: > Hi Konrad, > > I am kinda lost with the link you gave me. Can you please give some more > specifics? Follow the whole thread and you will get an idea of how to debug the failing instruction. That is what I am looking for. ^ permalink raw reply [flat|nested] 8+ messages in thread
![[-- Attachment #3: photo.jpg --] [-- Type: image/jpeg, Size: 213480 bytes --]](../../AANLkTikfK9uhMyDLlix3E9HknQBALWsdt9LcCjsUYUy_@mail.gmail.com/3-photo.jpg){kind=link}
end of thread, other threads:[~2010-07-15 13:31 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <AANLkTim33Hbar2x0ey8R3hyQ97esu_C6ll7GuYQIb8i_@mail.gmail.com>
2010-07-02 15:19 ` Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot ktckd
2010-07-06 14:15 ` Konrad Rzeszutek Wilk
2010-07-07 16:59 ` ktckd
2010-07-13 15:06 ` Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot - global_irq != irq for INT_SRC_OVR Konrad Rzeszutek Wilk
2010-07-13 18:22 ` Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot ktckd
2010-07-13 20:06 ` Konrad Rzeszutek Wilk
2010-07-14 20:47 ` ktckd
2010-07-15 13:31 ` Konrad Rzeszutek Wilk
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).