From: Bruce Edge <bruce.edge@gmail.com>
To: xen-devel@lists.xensource.com
Subject: domU boot time Oops: 0000 [#1] SMP with backtrace
Date: Sat, 19 Jun 2010 07:19:32 -0700 [thread overview]
Message-ID: <AANLkTilBp47tW1Iz3McfIGhrHbMzudbvDeV7wwuvb8Fw@mail.gmail.com> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 10170 bytes --]
This is a 2.6.32x pv-ops with essentially pasi's config, modified enough to
get past the
http://old.nabble.com/Re:--Xen-users--xen-stable-2.6.32.x-compilation-failure-in-do_hvm_suspend()-td28550826.html
problem
Started domain dpm (id=15)
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32.15 (root@kaan) (gcc version 4.3.3 (Ubuntu
4.3.3-5ubuntu4) ) #1 SMP Fri Jun 18 17:01:34 PDT 2010
Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.15
root=UUID=4d2c0dbc-296e-40be-bdbc-955437414fcb ro bigphysarea=128000 kdb=on
nmi_watchdog=1 init_cpus=0 console=ttyS0,115200n8 selinux=0
cgroup_disable=memory
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000080000000 (usable)
BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x80000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping: 0000000000000000-0000000080000000
RAMDISK: 3469c000 - 37fef46b
ACPI: RSDP 00000000000ea020 00024 (v02 Xen)
ACPI: XSDT 00000000fc012cb0 00034 (v01 Xen HVM 00000000 HVML
00000000)
ACPI: FACP 00000000fc012ad0 000F4 (v04 Xen HVM 00000000 HVML
00000000)
ACPI: DSDT 00000000fc002c40 0FE0B (v02 Xen HVM 00000000 INTL
20081204)
ACPI: FACS 00000000fc002c00 00040
ACPI: APIC 00000000fc012bd0 000D8 (v02 Xen HVM 00000000 HVML
00000000)
No NUMA configuration found
Faking a node at 0000000000000000-0000000080000000
Bootmem setup node 0 0000000000000000-0000000080000000
NODE_DATA [0000000000009000 - 0000000000020fff]
bootmap [0000000000021000 - 0000000000030fff] pages 10
(7 early reservations) ==> bootmem [0000000000 - 0080000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 -
0000008000]
#2 [0001000000 - 00027308b8] TEXT DATA BSS ==> [0001000000 -
00027308b8]
#3 [003469c000 - 0037fef46b] RAMDISK ==> [003469c000 -
0037fef46b]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 -
0000100000]
#5 [0002731000 - 00027310a1] BRK ==> [0002731000 -
00027310a1]
#6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 -
0000009000]
found SMP MP-table at [ffff8800000fbc40] fbc40
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x00080000
ACPI: PM-Timer IO Port: 0x1f48
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 15 CPUs, 14 hotplug CPUs
Xen version 4.0.
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7c000000)
Booting paravirtualized kernel on Xen
NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:15 nr_node_ids:1
PERCPU: Embedded 478 pages/cpu @ffff880006000000 s1927128 r8192 d22568
u2097152
pcpu-alloc: s1927128 r8192 d22568 u2097152 alloc=1*2097152
pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14
Built 1 zonelists in Node order, mobility grouping on. Total pages: 510779
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.15
root=UUID=4d2c0dbc-296e-40be-bdbc-955437414fcb ro bigphysarea=128000 kdb=on
nmi_watchdog=1 init_cpus=0 console=ttyS0,115200n8 selinux=0
cgroup_disable=memory
init_cpus[0]=1
setting init process cpumask to 81769470
Disabling memory control group subsystem
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Memory: 1932012k/2097152k available (4878k kernel code, 388k absent, 164752k
reserved, 3489k data, 3392k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:936
xen map irq failed -38
xen map irq failed -38
xen map irq failed -38
xen map irq failed -38
xen map irq failed -38
xen map irq failed -38
xen map irq failed -38
xen map irq failed -38
xen map irq failed -38
xen map irq failed -38
xen map irq failed -38
xen map irq failed -38
xen map irq failed -38
xen map irq failed -38
xen map irq failed -38
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
Console: colour VGA+ 80x25
console [ttyS0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 16384
... MAX_LOCKDEP_CHAINS: 32768
... CHAINHASH_SIZE: 16384
memory used by lock dependency info: 6367 kB
per task-struct memory footprint: 2688 bytes
Fast TSC calibration using PIT
Detected 2533.594 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency..
5067.18 BogoMIPS (lpj=2533594)
kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights
Reserved
kdb_cmd[0]: defcmd archkdb First line arch debugging
kdb_cmd[8]: defcmd archkdbcpu archkdb with only tasks on cpus
kdb_cmd[15]: defcmd archkdbshort archkdb with less detailed backtrace
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 0/0x0 -> Node 0
CPU: Unsupported number of siblings 32
mce: CPU supports 9 MCE banks
Performance Events: unsupported p6 CPU model 26 no PMU driver, software
events only.
lockdep: fixing up alternatives.
SMP alternatives: switching to UP code
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 24649 entries in 97 pages
Setting APIC routing to physical flat
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff8102ba2e>] add_pin_to_irq_node_nopanic+0x10/0x81
PGD 0
Oops: 0000 [#1] SMP
last sysfs file:
Entering kdb (current=0xffff88007f4c0000, pid 1) on processor 0 Oops: <NULL>
due to oops @ 0xffffffff8102ba2e
r15 = 0x0000000000000000 r14 = 0x0000000000000001
r13 = 0x0000000000000001 r12 = 0xffffffff81747480
bp = 0xffff88007f4bbe00 bx = 0x0000000000000005
r11 = 0xffff88007f4bbe00 r10 = 0xffff88007f4c0000
r9 = 0x0000000000000046 r8 = 0xffff88007f4bbe00
ax = 0xffffffff81747480 cx = 0x0000000000000001
dx = 0x0000000000000000 si = 0x0000000000000000
di = 0x0000000000000000 orig_ax = 0xffffffffffffffff
ip = 0xffffffff8102ba2e cs = 0x0000000000000010
flags = 0x0000000000010282 sp = 0xffff88007f4bbdd0
ss = 0x0000000000000018 ®s = 0xffff88007f4bbd38
[0]kdb>
[0]kdb>
[0]kdb>
[0]kdb> bt
Stack traceback for pid 1
0xffff88007f4c0000 1 0 1 0 R 0xffff88007f4c0560
*swapper
sp ip Function (args)
bb_parse_opcode: no match at [kernel]kdb_save_running 0xffffffff8124668f -
'push'
bb_parse_opcode: no match at [kernel]kdb_save_running 0xffffffff81246690 -
'mov'
bb_parse_opcode: no match at [kernel]kdb_save_running 0xffffffff81246693 -
'nop'
bb_parse_opcode: no match at [kernel]kdb_save_running 0xffffffff81246695 -
'add'
bb_parse_opcode: no match at [kernel]kdb_save_running 0xffffffff81246698 -
'mov'
kdb_bb: address 0xffff88007f4bba48 not recognised
Using old style backtrace, unreliable with no arguments
sp ip Function (args)
0xffff88007f4bbdb8 0xffffffff8102ba2e add_pin_to_irq_node_nopanic+0x10
0xffff88007f4bbe08 0xffffffff8102c9a1 add_pin_to_irq_node+0xe
0xffff88007f4bbe18 0xffffffff81a162fb setup_IO_APIC_irqs+0x1a4
0xffff88007f4bbe68 0xffffffff81a163c7 setup_IO_APIC+0x43
0xffff88007f4bbe88 0xffffffff81a11a74 native_smp_prepare_cpus+0x1d7
0xffff88007f4bbed8 0xffffffff81a048a6 kernel_init+0x75
0xffff88007f4bbf48 0xffffffff81013faa child_rip+0xa
[0]kdb>
[0]kdb>
[0]kdb>
[0]kdb>
This domU works with bare-metal kernels, this is the first time I've
attempted to use pv-ops kernel for this domU.
-Bruce
[-- Attachment #1.2: Type: text/html, Size: 12674 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
next reply other threads:[~2010-06-19 14:19 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-19 14:19 Bruce Edge [this message]
2010-06-19 15:37 ` domU boot time Oops: 0000 [#1] SMP with backtrace Pasi Kärkkäinen
2010-06-19 23:19 ` Bruce Edge
2010-06-20 8:53 ` Pasi Kärkkäinen
2010-06-20 14:21 ` Bruce Edge
2010-06-20 15:44 ` Pasi Kärkkäinen
[not found] ` <AANLkTimfw1tGMQ0vLbhQhSmHiBcddq9r-J-zWSgx3qGZ@mail.gmail.com>
2010-06-20 16:11 ` Fwd: " Bruce Edge
2010-06-21 14:44 ` Konrad Rzeszutek Wilk
2010-06-21 15:43 ` Stefano Stabellini
2010-06-21 16:50 ` Bruce Edge
2010-06-21 17:06 ` Bruce Edge
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AANLkTilBp47tW1Iz3McfIGhrHbMzudbvDeV7wwuvb8Fw@mail.gmail.com \
--to=bruce.edge@gmail.com \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).