* xen 4.0 + DVFS
@ 2010-05-14 17:09 Vinicius Petrucci
0 siblings, 0 replies; only message in thread
From: Vinicius Petrucci @ 2010-05-14 17:09 UTC (permalink / raw)
To: xen-devel
[-- Attachment #1: Type: text/plain, Size: 1928 bytes --]
hi,
i'm having some problems on using dvfs in Xen 4.0.
i'm running Ubuntu Server 10.04 with Xen 4.0 and Linux 2.6.32.10
paravirt_ops dom0
(i just followed the install steps from
http://lists.xensource.com/archives/html/xen-users/2010-03/msg00878.html)
The CPU model is: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz
(with 4 cores)
When I type "xenpm get-cpufreq-para", it returns:
cpu id : 0
affected_cpus : *0
cpuinfo frequency : max [2793000] min [1197000] cur [1197000]
scaling_driver : acpi-cpufreq
scaling_avail_gov : userspace performance powersave ondemand
current_governor : ondemand
ondemand specific :
sampling_rate : max [10000000] min [10000] cur [20000]
up_threshold : 80
turbo mode : enabled
scaling_avail_freq : 2793000 2660000 2527000 2394000 2261000 2128000
1995000 1862000 1729000 1596000 1463000 1330000 *1197000
scaling frequency : max [2793000] min [1197000] cur [1197000]
cpu id : 1
affected_cpus : 1
cpuinfo frequency : max [2793000] min [1197000] cur [1197000]
scaling_driver : acpi-cpufreq
scaling_avail_gov : userspace performance powersave ondemand
current_governor : ondemand
ondemand specific :
sampling_rate : max [10000000] min [10000] cur [20000]
up_threshold : 80
turbo mode : enabled
scaling_avail_freq : 2793000 2660000 2527000 2394000 2261000 2128000
1995000 1862000 1729000 1596000 1463000 1330000 *1197000
scaling frequency : max [2793000] min [1197000] cur [1197000]
[CPU2] failed to get cpufreq parameter
[CPU3] failed to get cpufreq parameter
from "xm dmesg" (attached in the email msg) i noticed these two error lines:
(XEN) cpufreq fail to add CPU2:incorrect _PSD(254:0), expect(254/4)
(XEN) cpufreq fail to add CPU3:incorrect _PSD(254:0), expect(254/4)
does anyone know any solution or tips to address this issue?
thanks,
vinicius
[-- Attachment #2: dom0-msg.txt --]
[-- Type: text/plain, Size: 47867 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.10 (root@galvani) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #4 SMP Fri May 14 11:43:48 AMT 2010
[ 0.000000] Command line: root=/dev/sda1 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] xen_release_chunk: looking at area pfn d0000-f8000: 163840 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn fc000-fec00: 11264 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn fec01-fee00: 511 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn fee01-ffe00: 4095 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn 100000-100002: 2 pages freed
[ 0.000000] released 179712 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] Xen: 000000000008f000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 00000000cf671000 (usable)
[ 0.000000] Xen: 00000000cf671000 - 00000000cf6bf000 (reserved)
[ 0.000000] Xen: 00000000cf6bf000 - 00000000cf6e5000 (usable)
[ 0.000000] Xen: 00000000cf6e5000 - 00000000cf7bf000 (ACPI NVS)
[ 0.000000] Xen: 00000000cf7bf000 - 00000000cf7e8000 (usable)
[ 0.000000] Xen: 00000000cf7e8000 - 00000000cf7f2000 (ACPI data)
[ 0.000000] Xen: 00000000cf7f2000 - 00000000cf7f3000 (usable)
[ 0.000000] Xen: 00000000cf7f3000 - 00000000cf7ff000 (ACPI data)
[ 0.000000] Xen: 00000000cf7ff000 - 00000000cf800000 (usable)
[ 0.000000] Xen: 00000000cf800000 - 00000000d0000000 (reserved)
[ 0.000000] Xen: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100002000 - 00000001f1670000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0x1f1670 max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000008f000 (usable)
[ 0.000000] modified: 000000000008f000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cf671000 (usable)
[ 0.000000] modified: 00000000cf671000 - 00000000cf6bf000 (reserved)
[ 0.000000] modified: 00000000cf6bf000 - 00000000cf6e5000 (usable)
[ 0.000000] modified: 00000000cf6e5000 - 00000000cf7bf000 (ACPI NVS)
[ 0.000000] modified: 00000000cf7bf000 - 00000000cf7e8000 (usable)
[ 0.000000] modified: 00000000cf7e8000 - 00000000cf7f2000 (ACPI data)
[ 0.000000] modified: 00000000cf7f2000 - 00000000cf7f3000 (usable)
[ 0.000000] modified: 00000000cf7f3000 - 00000000cf7ff000 (ACPI data)
[ 0.000000] modified: 00000000cf7ff000 - 00000000cf800000 (usable)
[ 0.000000] modified: 00000000cf800000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100002000 - 00000001f1670000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf800000
[ 0.000000] 0000000000 - 00cf800000 page 4k
[ 0.000000] kernel direct mapping tables up to cf800000 @ 100000-781000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001f1670000
[ 0.000000] 0100000000 - 01f1670000 page 4k
[ 0.000000] kernel direct mapping tables up to 1f1670000 @ f6e1000-10676000
[ 0.000000] RAMDISK: 01a7e000 - 0e6d5000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 00000000cf7fd120 0006C (v01 INTEL WBIBX10J 0000007A 01000013)
[ 0.000000] ACPI: FACP 00000000cf7fc000 000F4 (v03 INTEL WBIBX10J 0000007A MSFT 0100000D)
[ 0.000000] ACPI: DSDT 00000000cf7f8000 03432 (v02 INTEL WBIBX10J 0000007A MSFT 0100000D)
[ 0.000000] ACPI: FACS 00000000cf76c000 00040
[ 0.000000] ACPI: APIC 00000000cf7f7000 000BC (v02 INTEL WBIBX10J 0000007A MSFT 0100000D)
[ 0.000000] ACPI: WDDT 00000000cf7f6000 00040 (v01 INTEL WBIBX10J 0000007A MSFT 0100000D)
[ 0.000000] ACPI: MCFG 00000000cf7f5000 0003C (v01 INTEL WBIBX10J 0000007A MSFT 0100000D)
[ 0.000000] ACPI: ASF! 00000000cf7f4000 000A5 (v32 INTEL WBIBX10J 0000007A MSFT 0100000D)
[ 0.000000] ACPI: HPET 00000000cf7f3000 00038 (v01 INTEL WBIBX10J 0000007A MSFT 0100000D)
[ 0.000000] ACPI: ASPT 00000000cf7f1000 00034 (v05 INTEL WBIBX10J 0000007A MSFT 0100000D)
[ 0.000000] ACPI: WDTT 00000000cf7f0000 00224 (v02 INTEL WBIBX10J 0000007A MSFT 0100000D)
[ 0.000000] ACPI: SSDT 00000000cf7e9000 06F74 (v01 INTEL SSDT PM 0000007A MSFT 0100000D)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001f1670000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000001f1670000
[ 0.000000] NODE_DATA [0000000000008000 - 000000000000cfff]
[ 0.000000] bootmap [000000000000d000 - 000000000004b2cf] pages 3f
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 01f1670000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [000f662000 - 000f6e1000] XEN PAGETABLES ==> [000f662000 - 000f6e1000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001a5d2a4] TEXT DATA BSS ==> [0001000000 - 0001a5d2a4]
[ 0.000000] #4 [0001a7e000 - 000e6d5000] RAMDISK ==> [0001a7e000 - 000e6d5000]
[ 0.000000] #5 [000e6d5000 - 000f662000] XEN START INFO ==> [000e6d5000 - 000f662000]
[ 0.000000] #6 [0001a5e000 - 0001a5e15e] BRK ==> [0001a5e000 - 0001a5e15e]
[ 0.000000] #7 [0000100000 - 00006ff000] PGTABLE ==> [0000100000 - 00006ff000]
[ 0.000000] #8 [000f6e1000 - 000fe71000] PGTABLE ==> [000f6e1000 - 000fe71000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001f1670
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[8] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000008f
[ 0.000000] 0: 0x00000100 -> 0x000cf671
[ 0.000000] 0: 0x000cf6bf -> 0x000cf6e5
[ 0.000000] 0: 0x000cf7bf -> 0x000cf7e8
[ 0.000000] 0: 0x000cf7f2 -> 0x000cf7f3
[ 0.000000] 0: 0x000cf7ff -> 0x000cf800
[ 0.000000] 0: 0x00100002 -> 0x001f1670
[ 0.000000] On node 0 totalpages: 1838266
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1538 pages reserved
[ 0.000000] DMA zone: 2384 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 831226 pages, LIFO batch:31
[ 0.000000] Normal zone: 13519 pages used for memmap
[ 0.000000] Normal zone: 975263 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 256
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf671000 - 00000000cf6bf000
[ 0.000000] PM: Registered nosave memory: 00000000cf6e5000 - 00000000cf7bf000
[ 0.000000] PM: Registered nosave memory: 00000000cf7e8000 - 00000000cf7f2000
[ 0.000000] PM: Registered nosave memory: 00000000cf7f3000 - 00000000cf7ff000
[ 0.000000] PM: Registered nosave memory: 00000000cf800000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100002000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:28000000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.0 (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880016295000 s91288 r8192 d23400 u122880
[ 0.000000] pcpu-alloc: s91288 r8192 d23400 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.422253] trying to map vcpu_info 0 at ffff8800162a0020, mfn 2241be, offset 32
[ 0.422257] cpu 0 using vcpu_info at ffff8800162a0020
[ 0.422259] trying to map vcpu_info 1 at ffff8800162be020, mfn 2241dc, offset 32
[ 0.422261] cpu 1 using vcpu_info at ffff8800162be020
[ 0.422263] trying to map vcpu_info 2 at ffff8800162dc020, mfn 2241fa, offset 32
[ 0.422265] cpu 2 using vcpu_info at ffff8800162dc020
[ 0.422267] trying to map vcpu_info 3 at ffff8800162fa020, mfn 223e18, offset 32
[ 0.422269] cpu 3 using vcpu_info at ffff8800162fa020
[ 0.422271] Xen: using vcpu_info placement
[ 0.422275] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1808873
[ 0.422277] Policy zone: Normal
[ 0.422280] Kernel command line: root=/dev/sda1 ro quiet
[ 0.422297] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.422673] Initializing CPU#0
[ 0.429385] DMA: Placing 64MB software IO TLB between ffff880016316000 - ffff88001a316000
[ 0.429389] DMA: software IO TLB at phys 0x16316000 - 0x1a316000
[ 0.429391] xen_swiotlb_fixup: buf=ffff880016316000 size=67108864
[ 0.450907] xen_swiotlb_fixup: buf=ffff88001a376000 size=32768
[ 0.474944] Memory: 6933700k/8149440k available (5518k kernel code, 796376k absent, 419364k reserved, 3185k data, 796k init)
[ 0.474969] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.474988] Hierarchical RCU implementation.
[ 0.474993] NR_IRQS:4352 nr_irqs:1280
[ 0.475055] xen: --> irq=0
[ 0.475060] xen: --> irq=1
[ 0.475064] xen: --> irq=2
[ 0.475068] xen: --> irq=3
[ 0.475072] xen: --> irq=4
[ 0.475075] xen: --> irq=5
[ 0.475079] xen: --> irq=6
[ 0.475082] xen: --> irq=7
[ 0.475086] xen: --> irq=8
[ 0.475090] xen: --> irq=9
[ 0.475093] xen: --> irq=10
[ 0.475097] xen: --> irq=11
[ 0.475101] xen: --> irq=12
[ 0.475104] xen: --> irq=13
[ 0.475108] xen: --> irq=14
[ 0.475112] xen: --> irq=15
[ 0.475124] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.475126] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.475128] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
[ 0.475131] xen: registering gsi 9 triggering 0 polarity 0
[ 0.475133] xen_allocate_pirq: returning irq 9 for gsi 9
[ 0.475134] xen: --> irq=9
[ 0.475143] xen: acpi sci 9
[ 0.476739] Console: colour VGA+ 80x25
[ 0.476840] console [tty0] enabled
[ 0.488698] allocated 74711040 bytes of page_cgroup
[ 0.488701] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.488729] Xen: using vcpuop timer interface
[ 0.488728] installing Xen timer for CPU 0
[ 0.488739] alloc irq_desc for 1279 on node 0
[ 0.488741] alloc kstat_irqs on node 0
[ 0.488757] Detected 2666.812 MHz processor.
[ 0.488764] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.62 BogoMIPS (lpj=26668120)
[ 0.488780] Security Framework initialized
[ 0.488785] SELinux: Disabled at boot.
[ 0.489987] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.491927] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.492659] Mount-cache hash table entries: 256
[ 0.492762] Initializing cgroup subsys ns
[ 0.492765] Initializing cgroup subsys cpuacct
[ 0.492768] Initializing cgroup subsys memory
[ 0.492775] Initializing cgroup subsys devices
[ 0.492778] Initializing cgroup subsys freezer
[ 0.492780] Initializing cgroup subsys net_cls
[ 0.492809] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.492811] CPU: L2 cache: 256K
[ 0.492813] CPU: L3 cache: 8192K
[ 0.492817] CPU 0/0x0 -> Node 0
[ 0.492819] CPU: Unsupported number of siblings 16
[ 0.492822] Performance Events: unsupported p6 CPU model 30 no PMU driver, software events only.
[ 0.492833] SMP alternatives: switching to UP code
[ 0.524387] ACPI: Core revision 20090903
[ 0.533321] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.533326] ftrace: allocating 21821 entries in 86 pages
[ 0.538768] alloc irq_desc for 1278 on node 0
[ 0.538770] alloc kstat_irqs on node 0
[ 0.538776] cpu 0 spinlock event irq 1278
[ 0.538779] alloc irq_desc for 1277 on node 0
[ 0.538780] alloc kstat_irqs on node 0
[ 0.538784] alloc irq_desc for 1276 on node 0
[ 0.538786] alloc kstat_irqs on node 0
[ 0.538790] alloc irq_desc for 1275 on node 0
[ 0.538791] alloc kstat_irqs on node 0
[ 0.538796] alloc irq_desc for 1274 on node 0
[ 0.538798] alloc kstat_irqs on node 0
[ 0.538932] installing Xen timer for CPU 1
[ 0.538936] alloc irq_desc for 1273 on node 0
[ 0.538938] alloc kstat_irqs on node 0
[ 0.538943] alloc irq_desc for 1272 on node 0
[ 0.538944] alloc kstat_irqs on node 0
[ 0.538948] cpu 1 spinlock event irq 1272
[ 0.538966] SMP alternatives: switching to SMP code
[ 0.568508] alloc irq_desc for 1271 on node 0
[ 0.568509] alloc kstat_irqs on node 0
[ 0.568521] alloc irq_desc for 1270 on node 0
[ 0.568523] alloc kstat_irqs on node 0
[ 0.568527] alloc irq_desc for 1269 on node 0
[ 0.568528] alloc kstat_irqs on node 0
[ 0.568532] alloc irq_desc for 1268 on node 0
[ 0.568534] alloc kstat_irqs on node 0
[ 0.000006] Initializing CPU#1
[ 0.000039] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000041] CPU: L2 cache: 256K
[ 0.000042] CPU: L3 cache: 8192K
[ 0.000045] CPU 1/0x0 -> Node 0
[ 0.000047] CPU: Unsupported number of siblings 16
[ 0.568656] installing Xen timer for CPU 2
[ 0.568660] alloc irq_desc for 1267 on node 0
[ 0.568662] alloc kstat_irqs on node 0
[ 0.568666] alloc irq_desc for 1266 on node 0
[ 0.568668] alloc kstat_irqs on node 0
[ 0.568671] cpu 2 spinlock event irq 1266
[ 0.568687] alloc irq_desc for 1265 on node 0
[ 0.568689] alloc kstat_irqs on node 0
[ 0.568693] alloc irq_desc for 1264 on node 0
[ 0.568695] alloc kstat_irqs on node 0
[ 0.568698] alloc irq_desc for 1263 on node 0
[ 0.568700] alloc kstat_irqs on node 0
[ 0.568703] alloc irq_desc for 1262 on node 0
[ 0.568705] alloc kstat_irqs on node 0
[ 0.000005] Initializing CPU#2
[ 0.000035] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000037] CPU: L2 cache: 256K
[ 0.000038] CPU: L3 cache: 8192K
[ 0.000041] CPU 2/0x0 -> Node 0
[ 0.000043] CPU: Unsupported number of siblings 16
[ 0.568817] installing Xen timer for CPU 3
[ 0.568821] alloc irq_desc for 1261 on node 0
[ 0.568823] alloc kstat_irqs on node 0
[ 0.568827] alloc irq_desc for 1260 on node 0
[ 0.568829] alloc kstat_irqs on node 0
[ 0.568832] cpu 3 spinlock event irq 1260
[ 0.568847] alloc irq_desc for 1259 on node 0
[ 0.568849] alloc kstat_irqs on node 0
[ 0.568853] alloc irq_desc for 1258 on node 0
[ 0.568854] alloc kstat_irqs on node 0
[ 0.568858] alloc irq_desc for 1257 on node 0
[ 0.568860] alloc kstat_irqs on node 0
[ 0.568863] alloc irq_desc for 1256 on node 0
[ 0.568865] alloc kstat_irqs on node 0
[ 0.000005] Initializing CPU#3
[ 0.000035] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000037] CPU: L2 cache: 256K
[ 0.000038] CPU: L3 cache: 8192K
[ 0.000041] CPU 3/0x0 -> Node 0
[ 0.000043] CPU: Unsupported number of siblings 16
[ 0.568927] Brought up 4 CPUs
[ 0.568937] CPU0 attaching sched-domain:
[ 0.568940] domain 0: span 0-3 level CPU
[ 0.568942] groups: 0 1 2 3
[ 0.568949] CPU1 attaching sched-domain:
[ 0.568951] domain 0: span 0-3 level CPU
[ 0.568953] groups: 1 2 3 0
[ 0.568960] CPU2 attaching sched-domain:
[ 0.568961] domain 0: span 0-3 level CPU
[ 0.568964] groups: 2 3 0 1
[ 0.568970] CPU3 attaching sched-domain:
[ 0.568972] domain 0: span 0-3 level CPU
[ 0.568974] groups: 3 0 1 2
[ 0.569130] devtmpfs: initialized
[ 0.570355] Grant table initialized
[ 0.570357] regulator: core version 0.5
[ 0.570395] Time: 16:39:00 Date: 05/14/10
[ 0.570432] NET: Registered protocol family 16
[ 0.570476] alloc irq_desc for 1255 on node 0
[ 0.570478] alloc kstat_irqs on node 0
[ 0.570576] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.570579] ACPI: bus type pci registered
[ 0.570678] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.570681] PCI: MCFG area at f8000000 reserved in E820
[ 0.580915] PCI: Using MMCONFIG at f8000000 - fbffffff
[ 0.580917] PCI: Using configuration type 1 for base access
[ 0.581803] bio: create slab <bio-0> at 0
[ 0.583071] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.583155] ACPI: EC: Look up EC in DSDT
[ 0.596271] ACPI: Interpreter enabled
[ 0.596275] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.596303] ACPI: Using IOAPIC for interrupt routing
[ 0.601057] ACPI: No dock devices found.
[ 0.601403] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.601632] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.601638] pci 0000:00:03.0: PME# disabled
[ 0.602428] pci 0000:00:19.0: reg 10 32bit mmio: [0xe3100000-0xe311ffff]
[ 0.602454] pci 0000:00:19.0: reg 14 32bit mmio: [0xe3124000-0xe3124fff]
[ 0.602481] pci 0000:00:19.0: reg 18 io port: [0x2020-0x203f]
[ 0.602699] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.602713] pci 0000:00:19.0: PME# disabled
[ 0.602952] pci 0000:00:1a.0: reg 10 32bit mmio: [0xe3125400-0xe31257ff]
[ 0.603217] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.603231] pci 0000:00:1a.0: PME# disabled
[ 0.603438] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe3120000-0xe3123fff]
[ 0.603674] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.603689] pci 0000:00:1b.0: PME# disabled
[ 0.604041] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.604056] pci 0000:00:1c.0: PME# disabled
[ 0.604430] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.604444] pci 0000:00:1c.4: PME# disabled
[ 0.604806] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.604820] pci 0000:00:1c.6: PME# disabled
[ 0.605077] pci 0000:00:1d.0: reg 10 32bit mmio: [0xe3125000-0xe31253ff]
[ 0.605339] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.605353] pci 0000:00:1d.0: PME# disabled
[ 0.606172] pci 0000:00:1f.2: reg 10 io port: [0x2098-0x209f]
[ 0.606199] pci 0000:00:1f.2: reg 14 io port: [0x20ac-0x20af]
[ 0.606225] pci 0000:00:1f.2: reg 18 io port: [0x2090-0x2097]
[ 0.606242] pci 0000:00:1f.2: reg 1c io port: [0x20a8-0x20ab]
[ 0.606268] pci 0000:00:1f.2: reg 20 io port: [0x2070-0x207f]
[ 0.606294] pci 0000:00:1f.2: reg 24 io port: [0x2060-0x206f]
[ 0.606550] pci 0000:00:1f.3: reg 10 64bit mmio: [0xe3125800-0xe31258ff]
[ 0.606614] pci 0000:00:1f.3: reg 20 io port: [0x2000-0x201f]
[ 0.606855] pci 0000:00:1f.5: reg 10 io port: [0x2088-0x208f]
[ 0.606873] pci 0000:00:1f.5: reg 14 io port: [0x20a4-0x20a7]
[ 0.606899] pci 0000:00:1f.5: reg 18 io port: [0x2080-0x2087]
[ 0.606924] pci 0000:00:1f.5: reg 1c io port: [0x20a0-0x20a3]
[ 0.606950] pci 0000:00:1f.5: reg 20 io port: [0x2050-0x205f]
[ 0.606976] pci 0000:00:1f.5: reg 24 io port: [0x2040-0x204f]
[ 0.607200] pci 0000:01:00.0: reg 10 32bit mmio: [0xe2000000-0xe2ffffff]
[ 0.607215] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.607230] pci 0000:01:00.0: reg 1c 64bit mmio: [0xe0000000-0xe1ffffff]
[ 0.607239] pci 0000:01:00.0: reg 24 io port: [0x1000-0x107f]
[ 0.607248] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfff80000-0xffffffff]
[ 0.607357] pci 0000:00:03.0: bridge io port: [0x1000-0x1fff]
[ 0.607362] pci 0000:00:03.0: bridge 32bit mmio: [0xe0000000-0xe2ffffff]
[ 0.607370] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.608293] pci 0000:05:03.0: reg 10 32bit mmio: [0xe3004000-0xe30047ff]
[ 0.608319] pci 0000:05:03.0: reg 14 32bit mmio: [0xe3000000-0xe3003fff]
[ 0.608511] pci 0000:05:03.0: supports D1 D2
[ 0.608513] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.608526] pci 0000:05:03.0: PME# disabled
[ 0.608728] pci 0000:00:1e.0: transparent bridge
[ 0.608750] pci 0000:00:1e.0: bridge 32bit mmio: [0xe3000000-0xe30fffff]
[ 0.608880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.609423] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.609613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.609697] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.609774] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[ 0.609875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT]
[ 0.618218] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.618341] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.618461] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.618589] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.618713] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.618830] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.618953] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.619072] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.619146] sync cpu 0 get result 1 max_id 3
[ 0.619154] sync cpu 1 get result 1 max_id 3
[ 0.619161] sync cpu 2 get result 1 max_id 3
[ 0.619167] sync cpu 3 get result 1 max_id 3
[ 0.619170] alloc irq_desc for 1254 on node 0
[ 0.619172] alloc kstat_irqs on node 0
[ 0.619195] xen_balloon: Initialising balloon driver with page order 0.
[ 0.619259] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.619262] vgaarb: loaded
[ 0.619350] SCSI subsystem initialized
[ 0.619432] libata version 3.00 loaded.
[ 0.619496] usbcore: registered new interface driver usbfs
[ 0.619507] usbcore: registered new interface driver hub
[ 0.619530] usbcore: registered new device driver usb
[ 0.619643] ACPI: WMI: Mapper loaded
[ 0.619645] PCI: Using ACPI for IRQ routing
[ 0.619917] NetLabel: Initializing
[ 0.619919] NetLabel: domain hash size = 128
[ 0.619921] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.619932] NetLabel: unlabeled traffic allowed by default
[ 0.619965] Switching to clocksource xen
[ 0.621616] pnp: PnP ACPI init
[ 0.621627] ACPI: bus type pnp registered
[ 0.622254] xen: registering gsi 8 triggering 1 polarity 0
[ 0.622257] xen_allocate_pirq: returning irq 8 for gsi 8
[ 0.622258] xen: --> irq=8
[ 0.622301] xen: registering gsi 13 triggering 1 polarity 0
[ 0.622303] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.622305] xen: --> irq=13
[ 0.622737] pnp: PnP ACPI: found 10 devices
[ 0.622739] ACPI: ACPI bus type pnp unregistered
[ 0.622747] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.622750] system 00:01: iomem range 0xfeb00000-0xfeb03fff has been reserved
[ 0.622752] system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
[ 0.622755] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.622758] system 00:01: iomem range 0xfed1b000-0xfed1bfff has been reserved
[ 0.622760] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.622763] system 00:01: iomem range 0xfed1a000-0xfed1afff has been reserved
[ 0.622765] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.622768] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.622770] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
[ 0.622773] system 00:01: iomem range 0xc0000-0xdffff could not be reserved
[ 0.622776] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[ 0.622779] system 00:01: iomem range 0xff000000-0xffffffff could not be reserved
[ 0.622785] system 00:06: ioport range 0x500-0x57f has been reserved
[ 0.622787] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.622790] system 00:06: ioport range 0x680-0x6ff has been reserved
[ 0.626731] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.626746] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfff80000-0xffffffff]
[ 0.626953] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
[ 0.626956] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
[ 0.626959] pci 0000:00:03.0: IO window: 0x1000-0x1fff
[ 0.626965] pci 0000:00:03.0: MEM window: 0xe0000000-0xe2ffffff
[ 0.626971] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.626979] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.626987] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.627006] pci 0000:00:1c.0: MEM window: 0xe3200000-0xe33fffff
[ 0.627020] pci 0000:00:1c.0: PREFETCH window: 0x000000e3400000-0x000000e35fffff
[ 0.627046] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.627054] pci 0000:00:1c.4: IO window: 0x4000-0x4fff
[ 0.627074] pci 0000:00:1c.4: MEM window: 0xe3600000-0xe37fffff
[ 0.627088] pci 0000:00:1c.4: PREFETCH window: 0x000000e3800000-0x000000e39fffff
[ 0.627110] pci 0000:00:1c.6: PCI bridge, secondary bus 0000:04
[ 0.627118] pci 0000:00:1c.6: IO window: 0x5000-0x5fff
[ 0.627138] pci 0000:00:1c.6: MEM window: 0xe3a00000-0xe3bfffff
[ 0.627153] pci 0000:00:1c.6: PREFETCH window: 0x000000e3c00000-0x000000e3dfffff
[ 0.627179] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.627180] pci 0000:00:1e.0: IO window: disabled
[ 0.627200] pci 0000:00:1e.0: MEM window: 0xe3000000-0xe30fffff
[ 0.627214] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.627243] xen: registering gsi 16 triggering 0 polarity 1
[ 0.627249] alloc irq_desc for 16 on node 0
[ 0.627250] alloc kstat_irqs on node 0
[ 0.627253] xen: --> irq=16
[ 0.627258] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.627263] pci 0000:00:03.0: setting latency timer to 64
[ 0.627292] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.627300] xen: registering gsi 17 triggering 0 polarity 1
[ 0.627304] alloc irq_desc for 17 on node 0
[ 0.627305] alloc kstat_irqs on node 0
[ 0.627308] xen: --> irq=17
[ 0.627311] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.627327] pci 0000:00:1c.0: setting latency timer to 64
[ 0.627360] pci 0000:00:1c.4: enabling device (0000 -> 0003)
[ 0.627368] xen: registering gsi 17 triggering 0 polarity 1
[ 0.627369] xen_allocate_pirq: returning irq 17 for gsi 17
[ 0.627371] xen: --> irq=17
[ 0.627373] Already setup the GSI :17
[ 0.627375] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.627395] pci 0000:00:1c.4: setting latency timer to 64
[ 0.627422] pci 0000:00:1c.6: enabling device (0000 -> 0003)
[ 0.627431] xen: registering gsi 18 triggering 0 polarity 1
[ 0.627434] alloc irq_desc for 18 on node 0
[ 0.627436] alloc kstat_irqs on node 0
[ 0.627438] xen: --> irq=18
[ 0.627442] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.627458] pci 0000:00:1c.6: setting latency timer to 64
[ 0.627484] pci 0000:00:1e.0: setting latency timer to 64
[ 0.627493] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.627495] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.627497] pci_bus 0000:01: resource 0 io: [0x1000-0x1fff]
[ 0.627500] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xe2ffffff]
[ 0.627502] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.627504] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
[ 0.627506] pci_bus 0000:02: resource 1 mem: [0xe3200000-0xe33fffff]
[ 0.627508] pci_bus 0000:02: resource 2 pref mem [0xe3400000-0xe35fffff]
[ 0.627511] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff]
[ 0.627513] pci_bus 0000:03: resource 1 mem: [0xe3600000-0xe37fffff]
[ 0.627515] pci_bus 0000:03: resource 2 pref mem [0xe3800000-0xe39fffff]
[ 0.627517] pci_bus 0000:04: resource 0 io: [0x5000-0x5fff]
[ 0.627519] pci_bus 0000:04: resource 1 mem: [0xe3a00000-0xe3bfffff]
[ 0.627521] pci_bus 0000:04: resource 2 pref mem [0xe3c00000-0xe3dfffff]
[ 0.627523] pci_bus 0000:05: resource 1 mem: [0xe3000000-0xe30fffff]
[ 0.627526] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.627528] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.627551] NET: Registered protocol family 2
[ 0.627909] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.629442] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.631839] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.632125] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.632128] TCP reno registered
[ 0.632203] NET: Registered protocol family 1
[ 0.670151] pci 0000:01:00.0: Boot video device
[ 0.670197] Trying to unpack rootfs image as initramfs...
[ 0.775049] Freeing initrd memory: 209244k freed
[ 0.808480] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.808485] DMA: Placing 64MB software IO TLB between ffff880016316000 - ffff88001a316000
[ 0.808487] DMA: software IO TLB at phys 0x16316000 - 0x1a316000
[ 0.239894] Scanning for low memory corruption every 60 seconds
[ 0.240035] audit: initializing netlink socket (disabled)
[ 0.240050] type=2000 audit(1273855140.758:1): initialized
[ 0.248195] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.249438] VFS: Disk quotas dquot_6.5.2
[ 0.249483] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.250003] fuse init (API version 7.13)
[ 0.250073] msgmni has been set to 13951
[ 0.819225] alg: No test for stdrng (krng)
[ 0.250345] io scheduler noop registered
[ 0.250347] io scheduler anticipatory registered
[ 0.250349] io scheduler deadline registered
[ 0.250384] io scheduler cfq registered (default)
[ 0.250561] alloc irq_desc for 1253 on node 0
[ 0.250563] alloc kstat_irqs on node 0
[ 0.250593] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.250930] alloc irq_desc for 1252 on node 0
[ 0.250932] alloc kstat_irqs on node 0
[ 0.250988] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.251489] alloc irq_desc for 1251 on node 0
[ 0.251491] alloc kstat_irqs on node 0
[ 0.251543] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.252037] alloc irq_desc for 1250 on node 0
[ 0.252039] alloc kstat_irqs on node 0
[ 0.252095] pcieport 0000:00:1c.6: setting latency timer to 64
[ 0.252567] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 0.252576] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.252584] Firmware did not grant requested _OSC control
[ 0.252598] Firmware did not grant requested _OSC control
[ 0.252609] Firmware did not grant requested _OSC control
[ 0.252633] Firmware did not grant requested _OSC control
[ 0.252644] Firmware did not grant requested _OSC control
[ 0.252655] Firmware did not grant requested _OSC control
[ 0.252667] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.252774] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.252790] ACPI: Sleep Button [SLPB]
[ 0.252833] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.252835] ACPI: Power Button [PWRF]
[ 0.253719] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.254171] [Firmware Bug]: ACPI: Invalid BIOS _PSS frequency: 0x80000000 MHz
[ 0.254220] [Firmware Bug]: BIOS needs update for CPU frequency support
[ 0.254225] processor: probe of LNXCPU:01 failed with error -14
[ 0.254805] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.255268] [Firmware Bug]: ACPI: Invalid BIOS _PSS frequency: 0x80000000 MHz
[ 0.255315] [Firmware Bug]: BIOS needs update for CPU frequency support
[ 0.255320] processor: probe of LNXCPU:03 failed with error -14
[ 0.255951] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.256399] [Firmware Bug]: ACPI: Invalid BIOS _PSS frequency: 0x80000000 MHz
[ 0.256446] [Firmware Bug]: BIOS needs update for CPU frequency support
[ 0.256451] processor: probe of LNXCPU:05 failed with error -14
[ 0.257090] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.257538] [Firmware Bug]: ACPI: Invalid BIOS _PSS frequency: 0x80000000 MHz
[ 0.257584] [Firmware Bug]: BIOS needs update for CPU frequency support
[ 0.257589] processor: probe of LNXCPU:07 failed with error -14
[ 0.260171] alloc irq_desc for 1249 on node 0
[ 0.260173] alloc kstat_irqs on node 0
[ 0.260398] hpet_acpi_add: no address or irqs in _CRS
[ 0.260409] Linux agpgart interface v0.103
[ 0.260412] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.261459] brd: module loaded
[ 0.261836] loop: module loaded
[ 0.261901] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.261995] ata_piix 0000:00:1f.2: version 2.13
[ 0.262028] xen: registering gsi 19 triggering 0 polarity 1
[ 0.262034] alloc irq_desc for 19 on node 0
[ 0.262035] alloc kstat_irqs on node 0
[ 0.262038] xen: --> irq=19
[ 0.262044] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.262054] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.262131] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.262377] scsi0 : ata_piix
[ 0.262485] scsi1 : ata_piix
[ 0.262691] ata1: SATA max UDMA/133 cmd 0x2098 ctl 0x20ac bmdma 0x2070 irq 19
[ 0.262707] ata2: SATA max UDMA/133 cmd 0x2090 ctl 0x20a8 bmdma 0x2078 irq 19
[ 0.262768] xen: registering gsi 19 triggering 0 polarity 1
[ 0.262770] xen_allocate_pirq: returning irq 19 for gsi 19
[ 0.262772] xen: --> irq=19
[ 0.262774] Already setup the GSI :19
[ 0.262777] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.262791] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.262840] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.263089] scsi2 : ata_piix
[ 0.263153] scsi3 : ata_piix
[ 0.263257] ata3: SATA max UDMA/133 cmd 0x2088 ctl 0x20a4 bmdma 0x2050 irq 19
[ 0.263266] ata4: SATA max UDMA/133 cmd 0x2080 ctl 0x20a0 bmdma 0x2058 irq 19
[ 0.263865] Fixed MDIO Bus: probed
[ 0.263888] PPP generic driver version 2.4.2
[ 0.263916] tun: Universal TUN/TAP device driver, 1.6
[ 0.263917] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.263974] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.264010] xen: registering gsi 16 triggering 0 polarity 1
[ 0.264011] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.264013] xen: --> irq=16
[ 0.264015] Already setup the GSI :16
[ 0.264017] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.264038] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.264046] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.264072] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.264163] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.268107] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 0.268128] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe3125400
[ 0.863409] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.863575] usb usb1: configuration #1 chosen from 1 choice
[ 0.863630] hub 1-0:1.0: USB hub found
[ 0.863726] hub 1-0:1.0: 2 ports detected
[ 0.863841] xen: registering gsi 23 triggering 0 polarity 1
[ 0.863850] alloc irq_desc for 23 on node 0
[ 0.863854] alloc kstat_irqs on node 0
[ 0.863860] xen: --> irq=23
[ 0.863870] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.863907] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.863919] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.863979] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.864080] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.867982] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 0.868012] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xe3125000
[ 0.889598] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.889756] usb usb2: configuration #1 chosen from 1 choice
[ 0.889807] hub 2-0:1.0: USB hub found
[ 0.889898] hub 2-0:1.0: 2 ports detected
[ 0.889992] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.890020] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.890085] PNP: No PS/2 controller found. Probing ports directly.
[ 0.891083] i8042.c: No controller found.
[ 0.891182] mice: PS/2 mouse device common for all mice
[ 0.891299] rtc_cmos 00:03: RTC can wake from S4
[ 0.891330] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.891385] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.891482] device-mapper: uevent: version 1.0.3
[ 0.891560] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.891701] device-mapper: multipath: version 1.1.0 loaded
[ 0.891704] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.892195] cpuidle: using governor ladder
[ 0.892200] cpuidle: using governor menu
[ 0.892840] TCP cubic registered
[ 0.893054] NET: Registered protocol family 10
[ 0.894000] lo: Disabled Privacy Extensions
[ 0.894514] NET: Registered protocol family 17
[ 0.894931] PM: Resume from disk failed.
[ 0.894948] registered taskstats version 1
[ 0.896519] Magic number: 10:873:691
[ 0.896854] rtc_cmos 00:03: setting system clock to 2010-05-14 16:39:00 UTC (1273855140)
[ 0.896860] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.896863] EDD information not available.
[ 1.196224] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.196720] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.340027] usb 1-1: configuration #1 chosen from 1 choice
[ 1.340161] hub 1-1:1.0: USB hub found
[ 1.340233] hub 1-1:1.0: 6 ports detected
[ 1.349535] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.369868] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN01, max UDMA/100
[ 1.409906] ata4.00: configured for UDMA/100
[ 1.459396] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 1.555694] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 1.555726] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.610137] usb 2-1: configuration #1 chosen from 1 choice
[ 1.610331] hub 2-1:1.0: USB hub found
[ 1.610407] hub 2-1:1.0: 8 ports detected
[ 1.699769] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.699851] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.719971] ata1.00: ATA-8: ST3500418AS, CC37, max UDMA/133
[ 1.719977] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.760216] ata1.00: configured for UDMA/133
[ 1.760375] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC37 PQ: 0 ANSI: 5
[ 1.760589] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.760868] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.760981] sd 0:0:0:0: [sda] Write Protect is off
[ 1.760986] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.761045] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.761326] sda:
[ 1.765812] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN01 PQ: 0 ANSI: 5
[ 1.785292] sda1 sda2 <sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.792288] Uniform CD-ROM driver Revision: 3.20
[ 1.792438] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.792514] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 1.810693] sda5 >
[ 1.811380] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.811555] Freeing unused kernel memory: 796k freed
[ 1.811756] Write protecting the kernel read-only data: 7876k
[ 1.285734] udev: starting version 151
[ 1.888801] usb 2-1.7: new low speed USB device using ehci_hcd and address 3
[ 1.926951] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 1.926954] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.927032] xen: registering gsi 20 triggering 0 polarity 1
[ 1.927039] alloc irq_desc for 20 on node 0
[ 1.927040] alloc kstat_irqs on node 0
[ 1.927044] xen: --> irq=20
[ 1.927050] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.927063] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.927308] alloc irq_desc for 1248 on node 0
[ 1.927309] alloc kstat_irqs on node 0
[ 1.936730] xen: registering gsi 19 triggering 0 polarity 1
[ 1.936733] xen_allocate_pirq: returning irq 19 for gsi 19
[ 1.936735] xen: --> irq=19
[ 1.936737] Already setup the GSI :19
[ 1.936739] ohci1394 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.988387] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e3004000-e30047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.015737] usb 2-1.7: configuration #1 chosen from 1 choice
[ 2.061180] usbcore: registered new interface driver hiddev
[ 2.064136] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input3
[ 2.064199] generic-usb 0003:046D:C315.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1.7/input0
[ 2.064215] usbcore: registered new interface driver usbhid
[ 2.064217] usbhid: v2.6:USB HID core driver
[ 1.496812] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:f7:59:33
[ 1.496814] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.496879] 0000:00:19.0: eth0: MAC: 9, PHY: 9, PBA No: ffffff-0ff
[ 2.205688] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 3.306073] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270002527ced]
[ 3.737391] Adding 19803128k swap on /dev/sda5. Priority:-1 extents:1 across:19803128k
[ 3.743793] udev: starting version 151
[ 4.697583] lp: driver loaded but no devices found
[ 5.601880] Event-channel device installed.
[ 5.676356] xen: registering gsi 22 triggering 0 polarity 1
[ 5.676368] alloc irq_desc for 22 on node 0
[ 5.676373] alloc kstat_irqs on node 0
[ 5.676380] xen: --> irq=22
[ 5.676391] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.676705] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.860009] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.109232] hda_codec: ALC888: BIOS auto-probing.
[ 6.110755] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[ 8.692963] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 8.695082] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 9.864470] Bridge firewalling registered
[ 9.340635] virbr0: starting userspace STP failed, starting kernel STP
[ 10.159829] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.466865] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 10.467043] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 10.467046] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 10.467047] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 13.044716] lo: Disabled Privacy Extensions
[ 14.201389] ADDRCONF(NETDEV_UP): peth0: link is not ready
[ 19.069035] e1000e: peth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 19.071083] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
[ 19.286963] device peth0 entered promiscuous mode
[ 19.312178] eth0: port 1(peth0) entering forwarding state
[ 19.263751] alloc irq_desc for 1247 on node 0
[ 19.263755] alloc kstat_irqs on node 0
[ 19.263790] alloc irq_desc for 1246 on node 0
[ 19.263792] alloc kstat_irqs on node 0
[ 19.854703] XENBUS: Unable to read cpu state
[ 19.855026] XENBUS: Unable to read cpu state
[ 19.855293] XENBUS: Unable to read cpu state
[ 19.855661] XENBUS: Unable to read cpu state
[ 19.419438] virbr0: no IPv6 routers present
[ 29.340946] peth0: no IPv6 routers present
[ 29.460943] eth0: no IPv6 routers present
[-- Attachment #3: xen-msg.txt --]
[-- Type: text/plain, Size: 4511 bytes --]
__ __ _ _ ___ ___
\ \/ /___ _ __ | || | / _ \ / _ \
\ // _ \ '_ \ | || |_| | | | | | |
/ \ __/ | | | |__ _| |_| | |_| |
/_/\_\___|_| |_| |_|(_)___(_)___/
(XEN) Xen version 4.0.0 (root@cluster) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) Thu May 13 17:18:12 AMT 2010
(XEN) Latest ChangeSet: unavailable
(XEN) Command line: dummy=dummy
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000008f000 (usable)
(XEN) 000000000008f000 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cf671000 (usable)
(XEN) 00000000cf671000 - 00000000cf6bf000 (reserved)
(XEN) 00000000cf6bf000 - 00000000cf6e5000 (usable)
(XEN) 00000000cf6e5000 - 00000000cf7bf000 (ACPI NVS)
(XEN) 00000000cf7bf000 - 00000000cf7e8000 (usable)
(XEN) 00000000cf7e8000 - 00000000cf7f2000 (ACPI data)
(XEN) 00000000cf7f2000 - 00000000cf7f3000 (usable)
(XEN) 00000000cf7f3000 - 00000000cf7ff000 (ACPI data)
(XEN) 00000000cf7ff000 - 00000000cf800000 (usable)
(XEN) 00000000cf800000 - 00000000d0000000 (reserved)
(XEN) 00000000f8000000 - 00000000fc000000 (reserved)
(XEN) 00000000ffe00000 - 0000000100000000 (reserved)
(XEN) 0000000100002000 - 0000000230000000 (usable)
(XEN) ACPI: RSDP 000FE020, 0024 (r2 INTEL )
(XEN) ACPI: XSDT CF7FD120, 006C (r1 INTEL WBIBX10J 7A 1000013)
(XEN) ACPI: FACP CF7FC000, 00F4 (r3 INTEL WBIBX10J 7A MSFT 100000D)
(XEN) ACPI: DSDT CF7F8000, 3432 (r2 INTEL WBIBX10J 7A MSFT 100000D)
(XEN) ACPI: FACS CF76C000, 0040
(XEN) ACPI: APIC CF7F7000, 00BC (r2 INTEL WBIBX10J 7A MSFT 100000D)
(XEN) ACPI: WDDT CF7F6000, 0040 (r1 INTEL WBIBX10J 7A MSFT 100000D)
(XEN) ACPI: MCFG CF7F5000, 003C (r1 INTEL WBIBX10J 7A MSFT 100000D)
(XEN) ACPI: ASF! CF7F4000, 00A5 (r32 INTEL WBIBX10J 7A MSFT 100000D)
(XEN) ACPI: HPET CF7F3000, 0038 (r1 INTEL WBIBX10J 7A MSFT 100000D)
(XEN) ACPI: ASPT CF7F1000, 0034 (r5 INTEL WBIBX10J 7A MSFT 100000D)
(XEN) ACPI: WDTT CF7F0000, 0224 (r2 INTEL WBIBX10J 7A MSFT 100000D)
(XEN) ACPI: SSDT CF7E9000, 6F74 (r1 INTEL SSDT PM 7A MSFT 100000D)
(XEN) System RAM: 7955MB (8146408kB)
(XEN) Domain heap initialised
(XEN) Processor #0 7:14 APIC version 21
(XEN) Processor #2 7:14 APIC version 21
(XEN) Processor #4 7:14 APIC version 21
(XEN) Processor #6 7:14 APIC version 21
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2666.813 MHz processor.
(XEN) Initing memory sharing.
(XEN) CPU0: VMX disabled by BIOS.
(XEN) VMX: failed to initialise.
(XEN) I/O virtualisation disabled
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) TSC is reliable, synchronization unnecessary
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 4 CPUs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1a7e000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000210000000->0000000220000000 (1971824 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81a7e000
(XEN) Init. ramdisk: ffffffff81a7e000->ffffffff8e6d5000
(XEN) Phys-Mach map: ffffffff8e6d5000->ffffffff8f660380
(XEN) Start info: ffffffff8f661000->ffffffff8f6614b4
(XEN) Page tables: ffffffff8f662000->ffffffff8f6e1000
(XEN) Boot stack: ffffffff8f6e1000->ffffffff8f6e2000
(XEN) TOTAL: ffffffff80000000->ffffffff8f800000
(XEN) ENTRY ADDRESS: ffffffff81899200
(XEN) Dom0 has maximum 4 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 164kB init memory.
(XEN) cpufreq fail to add CPU2:incorrect _PSD(254:0), expect(254/4)
(XEN) cpufreq fail to add CPU3:incorrect _PSD(254:0), expect(254/4)
[-- Attachment #4: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-05-14 17:09 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-05-14 17:09 xen 4.0 + DVFS Vinicius Petrucci
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).