From: ktckd <ktckd9@gmail.com>
To: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xensource.com
Subject: Re: Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot
Date: Tue, 13 Jul 2010 13:22:06 -0500 [thread overview]
Message-ID: <AANLkTimPMNqtSmPdG20AL2Rsp106LstJkns3KkT0w91L@mail.gmail.com> (raw)
In-Reply-To: <AANLkTimrkcGIpe1Hzy0BkbBFAoENgLkFwAcTsUkE4m5q@mail.gmail.com>
[-- Attachment #1.1: Type: text/plain, Size: 1928 bytes --]
Thanks for the suggestion.
However I still see the hang with both 0 and 1 Polarity.
On Wed, Jul 7, 2010 at 11:59 AM, ktckd <ktckd9@gmail.com> wrote:
> Attaching the serial with the grub options mentioned below. Do let me know
> if you need any other information.
>
> I was using 2.6.18.8 when I tried xen 3.4.0
>
>
> On Tue, Jul 6, 2010 at 9:15 AM, Konrad Rzeszutek Wilk <
> konrad.wilk@oracle.com> wrote:
>
>> On Fri, Jul 02, 2010 at 10:19:02AM -0500, ktckd wrote:
>> > ---------- Forwarded message ----------
>> > From: ktckd <ktckd9@gmail.com>
>> > Date: Wed, Jun 30, 2010 at 4:49 PM
>> > Subject: Re: Xen4.0/FC8/Linux-2.6.31.13 hang on boot
>> > To: xen-users@lists.xensource.com
>> >
>> >
>> > Rebuilt Xen4.0 with linux-2.6.18 and have seen no problems during boot.
>> So
>> > is it the linux kernel that caused the problem? Then why don't I see any
>> > problem when I try the 4th grub entry?
>>
>> We need more than just the screenshots. You need to add these options to
>> your Linux kernel line: "console=hvc0 debug initcall_debug" so that we
>> can see where it happens.
>>
>> Also on the Xen line add 'sync_console console_to_ring'.
>>
>> >
>> >
>> > ---------- Forwarded message ----------
>> > From: ktckd <ktckd9@gmail.com>
>> > Date: Mon, Jun 28, 2010 at 1:23 PM
>> > Subject: Xen4.0/FC8/Linux-2.6.31.13 hang on boot
>> > To: xen-users@lists.xensource.com
>> >
>> >
>> > Hi list,
>> >
>> > I am seeing an issue on my notebook with Xen4.0/FC8/Linux-2.6.31.13. The
>> > unit has nVidia graphics and basically hangs at the point shown in the
>> > image. Not sure where I might be going wrong. Would appreciate if anyone
>> can
>> > point me in some direction. The unit has no problem booting into 3rd
>> > (acpi=off) and 4th boot entry. I remember xen3.4.0 worked fine the last
>> time
>> > I tried it on this unit.
>>
>> Was that with the 2.6.31.13 kernel? Or did you use another kernel at
>> that time?
>>
>>
>
[-- Attachment #1.2: Type: text/html, Size: 2968 bytes --]
[-- Attachment #2: Pol0-H.TXT --]
[-- Type: text/plain, Size: 52353 bytes --]
^[[0m^[[37m^[[40m^[[2J^[[01;01H^[[=3h^[[2J^[[01;01H^[[2J^[[01;01H^[[=3h^[[2J^[[01;01H __ __ _ _ ___ ___
\ \/ /___ _ __ | || | / _ \ / _ \
\ // _ \ '_ \ | || |_| | | | | | |
/ \ __/ | | | |__ _| |_| | |_| |
/_/\_\___|_| |_| |_|(_)___(_)___/
(XEN) Xen version 4.0.0 (root@localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) Wed Jun 30 16:31:17 CDT 2010
(XEN) Latest ChangeSet: unavailable
(XEN) Console output is synchronous.
(XEN) Command line: iommu=required loglvl=all guest_loglvl=all sync_console console_to_ring com1=115200,8n1 console=com1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 000000000009fc00 - 00000000000a0000 (reserved)
(XEN) 00000000000ef000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bbdd4000 (usable)
(XEN) 00000000bbdd4000 - 00000000bbec2000 (reserved)
(XEN) 00000000bbec2000 - 00000000bbfc2000 (ACPI NVS)
(XEN) 00000000bbfc2000 - 00000000bbfff000 (ACPI data)
(XEN) 00000000bbfff000 - 00000000bc000000 (usable)
(XEN) 00000000bc000000 - 00000000c0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fed10000 - 00000000fed14000 (reserved)
(XEN) 00000000fed19000 - 00000000fed1a000 (reserved)
(XEN) 00000000fed1b000 - 00000000fed20000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ffd00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 00000001c0000000 (usable)
(XEN) ACPI: RSDP 000F2AE0, 0024 (r2 HPQOEM)
(XEN) ACPI: XSDT BBFFE120, 0094 (r1 HPQOEM SLIC-MPC F 1000013)
(XEN) ACPI: FACP BBFFC000, 00F4 (r3 HPQOEM 1520 F HP 1)
(XEN) ACPI: DSDT BBFDB000, 1BCEC (r2 HPQOEM 1520 1 INTL 20060912)
(XEN) ACPI: FACS BBF41000, 0040
(XEN) ACPI: HPET BBFFB000, 0038 (r1 HPQOEM 1520 1 HP 1)
(XEN) ACPI: APIC BBFFA000, 00BC (r1 HPQOEM 1520 1 HP 1)
(XEN) ACPI: MCFG BBFF9000, 003C (r1 HPQOEM 1520 1 HP 1)
(XEN) ACPI: TCPA BBFF7000, 0032 (r2 HPQOEM 1520 0 HP 1)
(XEN) ACPI: SSDT BBFD8000, 0135 (r1 HPQOEM SataAhci 1000 INTL 20060912)
(XEN) ACPI: SSDT BBFD7000, 0314 (r1 HPQOEM PtidDevc 1000 INTL 20060912)
(XEN) ACPI: SLIC BBFD6000, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1)
(XEN) ACPI: SSDT BBFD2000, 2566 (r1 HPQOEM NVIDIAGF 1 INTL 20060912)
(XEN) ACPI: DMAR BBFD1000, 0068 (r1 INTEL CP_FIELD 1 INTL 1)
(XEN) ACPI: SSDT BBFD0000, 0A10 (r1 PmRef CpuPm 3000 INTL 20060912)
(XEN) ACPI: SSDT BBFCF000, 0288 (r1 PmRef Cpu0Tst 3000 INTL 20060912)
(XEN) ACPI: SSDT BBFCE000, 0225 (r1 PmRef ApTst 3000 INTL 20060912)
(XEN) ACPI: ASF! BBFF8000, 00A0 (r32 HPQOEM 1520 1 HP 1)
(XEN) System RAM: 6050MB (6196088kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-00000001c0000000
(XEN) Domain heap initialised
(XEN) DMI 2.6 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x408
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0]
(XEN) ACPI: wakeup_vec[bbf4100c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
(XEN) Processor #3 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
(XEN) Processor #4 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
(XEN) Processor #5 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
(XEN) Processor #6 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
(XEN) Processor #7 7:14 APIC version 21
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) [VT-D]dmar.c:504: RMRR address range not in reserved memory base = 0 end = fff; iommu_inclusive_mapping=1 parameter may be needed.
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 1729.041 MHz processor.
(XEN) Initing memory sharing.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Intel machine check reporting enabled
(XEN) Intel VT-d Snoop Control supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation supported.
(XEN) Intel VT-d Interrupt Remapping not supported.
(XEN) I/O virtualisation enabled
(XEN) I/O virtualisation for PV guests disabled
(XEN) Total of 8 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) TSC is reliable, synchronization unnecessary
(XEN) Platform timer is 14.318MHz HPET
ÿ(XEN) Allocated console ring of 64 KiB.
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) microcode.c:73:d32767 microcode: CPU4 resumed
(XEN) Brought up 8 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
(XEN) microcode.c:73:d32767 microcode: CPU5 resumed
(XEN) microcode.c:73:d32767 microcode: CPU6 resumed
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) microcode.c:73:d32767 microcode: CPU7 resumed
(XEN) Turbo Mode detected!
(XEN) HPET: 8 timers in total, 8 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1884000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 00000001b4000000->00000001b8000000 (1484563 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81884000
(XEN) Init. ramdisk: ffffffff81884000->ffffffff82051400
(XEN) Phys-Mach map: ffffffff82052000->ffffffff82bc5898
(XEN) Start info: ffffffff82bc6000->ffffffff82bc64b4
(XEN) Page tables: ffffffff82bc7000->ffffffff82be2000
(XEN) Boot stack: ffffffff82be2000->ffffffff82be3000
(XEN) TOTAL: ffffffff80000000->ffffffff83000000
(XEN) ENTRY ADDRESS: ffffffff81666de0
(XEN) Dom0 has maximum 8 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 156kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
(XEN) io_apic.c:2290:
(XEN) ioapic_guest_write: apic=0, pin=2, irq=0
(XEN) ioapic_guest_write: new_entry=000109f0
(XEN) ioapic_guest_write: old_entry=000009f0 pirq=0
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) irq.c:1445: dom0: pirq 0 or irq 3 already mapped
(XEN) io_apic.c:2290:
(XEN) ioapic_guest_write: apic=0, pin=4, irq=4
(XEN) ioapic_guest_write: new_entry=000109f1
(XEN) ioapic_guest_write: old_entry=000009f1 pirq=0
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) irq.c:1445: dom0: pirq 0 or irq 5 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 6 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 7 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 8 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 9 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 10 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 11 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 12 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 13 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 14 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 15 already mapped
(XEN) allocated vector 21 for irq 16
(XEN) irq.c:1445: dom0: pirq 0 or irq 16 already mapped
(XEN) allocated vector 29 for irq 20
(XEN) irq.c:1445: dom0: pirq 0 or irq 20 already mapped
(XEN) allocated vector 31 for irq 21
(XEN) irq.c:1445: dom0: pirq 0 or irq 21 already mapped
(XEN) allocated vector 39 for irq 22
(XEN) irq.c:1445: dom0: pirq 0 or irq 22 already mapped
(XEN) allocated vector 41 for irq 23
(XEN) irq.c:1445: dom0: pirq 0 or irq 23 already mapped
(XEN) io_apic.c:2290:
(XEN) ioapic_guest_write: apic=0, pin=0, irq=0
(XEN) ioapic_guest_write: new_entry=000009f0
(XEN) ioapic_guest_write: old_entry=00010260 pirq=0
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2290:
(XEN) ioapic_guest_write: apic=0, pin=2, irq=0
(XEN) ioapic_guest_write: new_entry=000189f0
(XEN) ioapic_guest_write: old_entry=000009f0 pirq=2
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
Linux version 2.6.31.13-xen (root@localhost.localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #3 SMP Tue Jul 13 12:30:31 CDT 2010
Command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed
xen_release_chunk: looking at area pfn f0000-fec00: 60416 pages freed
xen_release_chunk: looking at area pfn fec01-fed10: 271 pages freed
xen_release_chunk: looking at area pfn fed14-fed19: 5 pages freed
xen_release_chunk: looking at area pfn fed1a-fed1b: 1 pages freed
xen_release_chunk: looking at area pfn fed20-fee00: 224 pages freed
xen_release_chunk: looking at area pfn fee01-ffd00: 3839 pages freed
released 195828 pages of unused memory
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000000009fc00 (usable)
Xen: 000000000009fc00 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 00000000bbdd4000 (usable)
Xen: 00000000bbdd4000 - 00000000bbec2000 (reserved)
Xen: 00000000bbec2000 - 00000000bbfc2000 (ACPI NVS)
Xen: 00000000bbfc2000 - 00000000bbfff000 (ACPI data)
Xen: 00000000bbfff000 - 00000000bc000000 (usable)
Xen: 00000000bc000000 - 00000000c0000000 (reserved)
Xen: 00000000e0000000 - 00000000f0000000 (reserved)
Xen: 00000000fec00000 - 00000000fec01000 (reserved)
Xen: 00000000fed10000 - 00000000fed14000 (reserved)
Xen: 00000000fed19000 - 00000000fed1a000 (reserved)
Xen: 00000000fed1b000 - 00000000fed20000 (reserved)
Xen: 00000000fee00000 - 00000000fee01000 (reserved)
Xen: 00000000ffd00000 - 0000000100000000 (reserved)
Xen: 0000000100000000 - 000000016e713000 (usable)
DMI 2.6 present.
last_pfn = 0x16e713 max_arch_pfn = 0x400000000
last_pfn = 0xbc000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bc000000
0000000000 - 00bc000000 page 4k
kernel direct mapping tables up to bc000000 @ 100000-6e4000
init_memory_mapping: 0000000100000000-000000016e713000
0100000000 - 016e713000 page 4k
kernel direct mapping tables up to 16e713000 @ 2be2000-375d000
RAMDISK: 01884000 - 02051400
ACPI: RSDP 00000000000f2ae0 00024 (v02 HPQOEM)
ACPI: XSDT 00000000bbffe120 00094 (v01 HPQOEM SLIC-MPC 0000000F 01000013)
ACPI: FACP 00000000bbffc000 000F4 (v03 HPQOEM 1520 0000000F HP 00000001)
ACPI: DSDT 00000000bbfdb000 1BCEC (v02 HPQOEM 1520 00000001 INTL 20060912)
ACPI: FACS 00000000bbf41000 00040
ACPI: HPET 00000000bbffb000 00038 (v01 HPQOEM 1520 00000001 HP 00000001)
ACPI: APIC 00000000bbffa000 000BC (v01 HPQOEM 1520 00000001 HP 00000001)
ACPI: MCFG 00000000bbff9000 0003C (v01 HPQOEM 1520 00000001 HP 00000001)
ACPI: TCPA 00000000bbff7000 00032 (v02 HPQOEM 1520 00000000 HP 00000001)
ACPI: SSDT 00000000bbfd8000 00135 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
ACPI: SSDT 00000000bbfd7000 00314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
ACPI: SLIC 00000000bbfd6000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: SSDT 00000000bbfd2000 02566 (v01 HPQOEM NVIDIAGF 00000001 INTL 20060912)
ACPI: 00000000bbfd1000 00068 (v01 INTEL CP_FIELD 00000001 INTL 00000001)
ACPI: SSDT 00000000bbfd0000 00A10 (v01 PmRef CpuPm 00003000 INTL 20060912)
ACPI: SSDT 00000000bbfcf000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
ACPI: SSDT 00000000bbfce000 00225 (v01 PmRef ApTst 00003000 INTL 20060912)
ACPI: ASF! 00000000bbff8000 000A0 (v32 HPQOEM 1520 00000001 HP 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000016e713000
Bootmem setup node 0 0000000000000000-000000016e713000
NODE_DATA [0000000000001000 - 0000000000005fff]
bootmap [0000000000008000 - 0000000000035ce7] pages 2e
(9 early reservations) ==> bootmem [0000000000 - 016e713000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0002bc7000 - 0002be2000] XEN PAGETABLES ==> [0002bc7000 - 0002be2000]
#2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#3 [0001000000 - 0001863170] TEXT DATA BSS ==> [0001000000 - 0001863170]
#4 [0001884000 - 0002051400] RAMDISK ==> [0001884000 - 0002051400]
#5 [0002052000 - 0002bc7000] XEN START INFO ==> [0002052000 - 0002bc7000]
#6 [0001864000 - 0001864229] BRK ==> [0001864000 - 0001864229]
#7 [0000100000 - 00006c6000] PGTABLE ==> [0000100000 - 00006c6000]
#8 [0002be2000 - 0002f58000] PGTABLE ==> [0002be2000 - 0002f58000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0016e713
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x000bbdd4
0: 0x000bbfff -> 0x000bc000
0: 0x00100000 -> 0x0016e713
On node 0 totalpages: 1221767
DMA zone: 56 pages used for memmap
DMA zone: 1481 pages reserved
DMA zone: 2462 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 751117 pages, LIFO batch:31
Normal zone: 6185 pages used for memmap
Normal zone: 446186 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000bbdd4000 - 00000000bbec2000
PM: Registered nosave memory: 00000000bbec2000 - 00000000bbfc2000
PM: Registered nosave memory: 00000000bbfc2000 - 00000000bbfff000
PM: Registered nosave memory: 00000000bc000000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed19000
PM: Registered nosave memory: 00000000fed19000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffd00000
PM: Registered nosave memory: 00000000ffd00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Allocated 22 4k pages, static data 89056 bytes
trying to map vcpu_info 0 at ffffc9000000b020, mfn 192dc2, offset 32
cpu 0 using vcpu_info at ffffc9000000b020
trying to map vcpu_info 1 at ffffc90000023020, mfn 192dd8, offset 32
cpu 1 using vcpu_info at ffffc90000023020
trying to map vcpu_info 2 at ffffc9000003b020, mfn 192dee, offset 32
cpu 2 using vcpu_info at ffffc9000003b020
trying to map vcpu_info 3 at ffffc90000053020, mfn 192a04, offset 32
cpu 3 using vcpu_info at ffffc90000053020
trying to map vcpu_info 4 at ffffc9000006b020, mfn 192a1a, offset 32
cpu 4 using vcpu_info at ffffc9000006b020
trying to map vcpu_info 5 at ffffc90000083020, mfn 192a30, offset 32
cpu 5 using vcpu_info at ffffc90000083020
trying to map vcpu_info 6 at ffffc9000009b020, mfn 192a46, offset 32
cpu 6 using vcpu_info at ffffc9000009b020
trying to map vcpu_info 7 at ffffc900000b3020, mfn 192a5c, offset 32
cpu 7 using vcpu_info at ffffc900000b3020
Xen: using vcpu_info placement
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1199765
Policy zone: Normal
Kernel command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1
PID hash table entries: 4096 (order: 12, 32768 bytes)
Initializing CPU#0
PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB)
xen_swiotlb_fixup: buf=ffff880020000000 size=67108864
xen_swiotlb_fixup: buf=ffff880024060000 size=32768
Placing 64MB Xen software IO TLB between ffff880020000000 - ffff880024000000
Xen software IO TLB at phys 0x20000000 - 0x24000000
Memory: 4714016k/6003788k available (3831k kernel code, 1116720k absent, 173052k reserved, 2628k data, 616k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304
xen: registering gsi 0 triggering 1 polarity 0
xen: --> irq=0
xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0
xen: registering gsi 1 triggering 1 polarity 0
xen: --> irq=1
xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0
xen_setup_pirqs: IRQ: 2 bus_irq != global_irq!
xen: registering gsi 2 triggering 0 polarity 0
xen: --> irq=2
xen_set_ioapic_routing: irq 2 gsi 2 vector 2 ioapic 0 pin 2 triggering 1 polarity 0
xen: registering gsi 3 triggering 1 polarity 0
xen: --> irq=3
xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3 triggering 0 polarity 0
xen: registering gsi 4 triggering 1 polarity 0
xen: --> irq=4
xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0
xen: registering gsi 5 triggering 1 polarity 0
xen: --> irq=5
xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5 triggering 0 polarity 0
xen: registering gsi 6 triggering 1 polarity 0
xen: --> irq=6
xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0
xen: registering gsi 7 triggering 1 polarity 0
xen: --> irq=7
xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7 triggering 0 polarity 0
xen: registering gsi 8 triggering 1 polarity 0
xen: --> irq=8
xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0
xen: registering gsi 9 triggering 0 polarity 0
xen: --> irq=9
xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9 triggering 1 polarity 0
xen: registering gsi 10 triggering 1 polarity 0
xen: --> irq=10
xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin 10 triggering 0 polarity 0
xen: registering gsi 11 triggering 1 polarity 0
xen: --> irq=11
xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin 11 triggering 0 polarity 0
xen: registering gsi 12 triggering 1 polarity 0
xen: --> irq=12
xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0
xen: registering gsi 13 triggering 1 polarity 0
xen: --> irq=13
xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0
xen: registering gsi 14 triggering 1 polarity 0
xen: --> irq=14
xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin 14 triggering 0 polarity 0
xen: registering gsi 15 triggering 1 polarity 0
xen: --> irq=15
xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin 15 triggering 0 polarity 0
Detected 1729.041 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [hvc0] enabled
console [ttyS0] enabled
Linux version 2.6.31.13-xen (root@localhost.localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #3 SMP Tue Jul 13 12:30:31 CDT 2010
Command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed
xen_release_chunk: looking at area pfn f0000-fec00: 60416 pages freed
xen_release_chunk: looking at area pfn fec01-fed10: 271 pages freed
xen_release_chunk: looking at area pfn fed14-fed19: 5 pages freed
xen_release_chunk: looking at area pfn fed1a-fed1b: 1 pages freed
xen_release_chunk: looking at area pfn fed20-fee00: 224 pages freed
xen_release_chunk: looking at area pfn fee01-ffd00: 3839 pages freed
released 195828 pages of unused memory
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000000009fc00 (usable)
Xen: 000000000009fc00 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 00000000bbdd4000 (usable)
Xen: 00000000bbdd4000 - 00000000bbec2000 (reserved)
Xen: 00000000bbec2000 - 00000000bbfc2000 (ACPI NVS)
Xen: 00000000bbfc2000 - 00000000bbfff000 (ACPI data)
Xen: 00000000bbfff000 - 00000000bc000000 (usable)
Xen: 00000000bc000000 - 00000000c0000000 (reserved)
Xen: 00000000e0000000 - 00000000f0000000 (reserved)
Xen: 00000000fec00000 - 00000000fec01000 (reserved)
Xen: 00000000fed10000 - 00000000fed14000 (reserved)
Xen: 00000000fed19000 - 00000000fed1a000 (reserved)
Xen: 00000000fed1b000 - 00000000fed20000 (reserved)
Xen: 00000000fee00000 - 00000000fee01000 (reserved)
Xen: 00000000ffd00000 - 0000000100000000 (reserved)
Xen: 0000000100000000 - 000000016e713000 (usable)
DMI 2.6 present.
last_pfn = 0x16e713 max_arch_pfn = 0x400000000
last_pfn = 0xbc000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bc000000
0000000000 - 00bc000000 page 4k
kernel direct mapping tables up to bc000000 @ 100000-6e4000
init_memory_mapping: 0000000100000000-000000016e713000
0100000000 - 016e713000 page 4k
kernel direct mapping tables up to 16e713000 @ 2be2000-375d000
RAMDISK: 01884000 - 02051400
ACPI: RSDP 00000000000f2ae0 00024 (v02 HPQOEM)
ACPI: XSDT 00000000bbffe120 00094 (v01 HPQOEM SLIC-MPC 0000000F 01000013)
ACPI: FACP 00000000bbffc000 000F4 (v03 HPQOEM 1520 0000000F HP 00000001)
ACPI: DSDT 00000000bbfdb000 1BCEC (v02 HPQOEM 1520 00000001 INTL 20060912)
ACPI: FACS 00000000bbf41000 00040
ACPI: HPET 00000000bbffb000 00038 (v01 HPQOEM 1520 00000001 HP 00000001)
ACPI: APIC 00000000bbffa000 000BC (v01 HPQOEM 1520 00000001 HP 00000001)
ACPI: MCFG 00000000bbff9000 0003C (v01 HPQOEM 1520 00000001 HP 00000001)
ACPI: TCPA 00000000bbff7000 00032 (v02 HPQOEM 1520 00000000 HP 00000001)
ACPI: SSDT 00000000bbfd8000 00135 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
ACPI: SSDT 00000000bbfd7000 00314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
ACPI: SLIC 00000000bbfd6000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: SSDT 00000000bbfd2000 02566 (v01 HPQOEM NVIDIAGF 00000001 INTL 20060912)
ACPI: 00000000bbfd1000 00068 (v01 INTEL CP_FIELD 00000001 INTL 00000001)
ACPI: SSDT 00000000bbfd0000 00A10 (v01 PmRef CpuPm 00003000 INTL 20060912)
ACPI: SSDT 00000000bbfcf000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
ACPI: SSDT 00000000bbfce000 00225 (v01 PmRef ApTst 00003000 INTL 20060912)
ACPI: ASF! 00000000bbff8000 000A0 (v32 HPQOEM 1520 00000001 HP 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000016e713000
Bootmem setup node 0 0000000000000000-000000016e713000
NODE_DATA [0000000000001000 - 0000000000005fff]
bootmap [0000000000008000 - 0000000000035ce7] pages 2e
(9 early reservations) ==> bootmem [0000000000 - 016e713000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0002bc7000 - 0002be2000] XEN PAGETABLES ==> [0002bc7000 - 0002be2000]
#2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#3 [0001000000 - 0001863170] TEXT DATA BSS ==> [0001000000 - 0001863170]
#4 [0001884000 - 0002051400] RAMDISK ==> [0001884000 - 0002051400]
#5 [0002052000 - 0002bc7000] XEN START INFO ==> [0002052000 - 0002bc7000]
#6 [0001864000 - 0001864229] BRK ==> [0001864000 - 0001864229]
#7 [0000100000 - 00006c6000] PGTABLE ==> [0000100000 - 00006c6000]
#8 [0002be2000 - 0002f58000] PGTABLE ==> [0002be2000 - 0002f58000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0016e713
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x000bbdd4
0: 0x000bbfff -> 0x000bc000
0: 0x00100000 -> 0x0016e713
On node 0 totalpages: 1221767
DMA zone: 56 pages used for memmap
DMA zone: 1481 pages reserved
DMA zone: 2462 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 751117 pages, LIFO batch:31
Normal zone: 6185 pages used for memmap
Normal zone: 446186 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000bbdd4000 - 00000000bbec2000
PM: Registered nosave memory: 00000000bbec2000 - 00000000bbfc2000
PM: Registered nosave memory: 00000000bbfc2000 - 00000000bbfff000
PM: Registered nosave memory: 00000000bc000000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed19000
PM: Registered nosave memory: 00000000fed19000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffd00000
PM: Registered nosave memory: 00000000ffd00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Allocated 22 4k pages, static data 89056 bytes
trying to map vcpu_info 0 at ffffc9000000b020, mfn 192dc2, offset 32
cpu 0 using vcpu_info at ffffc9000000b020
trying to map vcpu_info 1 at ffffc90000023020, mfn 192dd8, offset 32
cpu 1 using vcpu_info at ffffc90000023020
trying to map vcpu_info 2 at ffffc9000003b020, mfn 192dee, offset 32
cpu 2 using vcpu_info at ffffc9000003b020
trying to map vcpu_info 3 at ffffc90000053020, mfn 192a04, offset 32
cpu 3 using vcpu_info at ffffc90000053020
trying to map vcpu_info 4 at ffffc9000006b020, mfn 192a1a, offset 32
cpu 4 using vcpu_info at ffffc9000006b020
trying to map vcpu_info 5 at ffffc90000083020, mfn 192a30, offset 32
cpu 5 using vcpu_info at ffffc90000083020
trying to map vcpu_info 6 at ffffc9000009b020, mfn 192a46, offset 32
cpu 6 using vcpu_info at ffffc9000009b020
trying to map vcpu_info 7 at ffffc900000b3020, mfn 192a5c, offset 32
cpu 7 using vcpu_info at ffffc900000b3020
Xen: using vcpu_info placement
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1199765
Policy zone: Normal
Kernel command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1
PID hash table entries: 4096 (order: 12, 32768 bytes)
Initializing CPU#0
PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB)
xen_swiotlb_fixup: buf=ffff880020000000 size=67108864
xen_swiotlb_fixup: buf=ffff880024060000 size=32768
Placing 64MB Xen software IO TLB between ffff880020000000 - ffff880024000000
Xen software IO TLB at phys 0x20000000 - 0x24000000
Memory: 4714016k/6003788k available (3831k kernel code, 1116720k absent, 173052k reserved, 2628k data, 616k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304
xen: registering gsi 0 triggering 1 polarity 0
xen: --> irq=0
xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0
xen: registering gsi 1 triggering 1 polarity 0
xen: --> irq=1
xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0
xen_setup_pirqs: IRQ: 2 bus_irq != global_irq!
xen: registering gsi 2 triggering 0 polarity 0
xen: --> irq=2
xen_set_ioapic_routing: irq 2 gsi 2 vector 2 ioapic 0 pin 2 triggering 1 polarity 0
xen: registering gsi 3 triggering 1 polarity 0
xen: --> irq=3
xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3 triggering 0 polarity 0
xen: registering gsi 4 triggering 1 polarity 0
xen: --> irq=4
xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0
xen: registering gsi 5 triggering 1 polarity 0
xen: --> irq=5
xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5 triggering 0 polarity 0
xen: registering gsi 6 triggering 1 polarity 0
xen: --> irq=6
xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0
xen: registering gsi 7 triggering 1 polarity 0
xen: --> irq=7
xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7 triggering 0 polarity 0
xen: registering gsi 8 triggering 1 polarity 0
xen: --> irq=8
xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0
xen: registering gsi 9 triggering 0 polarity 0
xen: --> irq=9
xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9 triggering 1 polarity 0
xen: registering gsi 10 triggering 1 polarity 0
xen: --> irq=10
xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin 10 triggering 0 polarity 0
xen: registering gsi 11 triggering 1 polarity 0
xen: --> irq=11
xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin 11 triggering 0 polarity 0
xen: registering gsi 12 triggering 1 polarity 0
xen: --> irq=12
xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0
xen: registering gsi 13 triggering 1 polarity 0
xen: --> irq=13
xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0
xen: registering gsi 14 triggering 1 polarity 0
xen: --> irq=14
xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin 14 triggering 0 polarity 0
xen: registering gsi 15 triggering 1 polarity 0
xen: --> irq=15
xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin 15 triggering 0 polarity 0
Detected 1729.041 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [hvc0] enabled
console [ttyS0] enabled
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
xen: vcpu_time_info placement not supported
Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.08 BogoMIPS (lpj=1729041)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 0/0x0 -> Node 0
CPU: Unsupported number of siblings 16
mce: CPU supports 9 MCE banks
Performance Counters: unsupported p6 CPU model 30 no PMU driver, software counters only.
SMP alternatives: switching to UP code
ACPI: Core revision 20090521
calling migration_init+0x0/0x80 @ 1
initcall migration_init+0x0/0x80 returned 1 after 976 usecs
initcall migration_init+0x0/0x80 returned with error code 1
calling spawn_ksoftirqd+0x0/0x7a @ 1
initcall spawn_ksoftirqd+0x0/0x7a returned 0 after 976 usecs
calling init_call_single_data+0x0/0xa8 @ 1
initcall init_call_single_data+0x0/0xa8 returned 0 after 0 usecs
calling spawn_softlockup_task+0x0/0x96 @ 1
initcall spawn_softlockup_task+0x0/0x96 returned 0 after 976 usecs
calling relay_init+0x0/0x3c @ 1
initcall relay_init+0x0/0x3c returned 0 after 0 usecs
calling tracer_alloc_buffers+0x0/0x18c @ 1
initcall tracer_alloc_buffers+0x0/0x18c returned 0 after 0 usecs
calling init_trace_printk+0x0/0x39 @ 1
initcall init_trace_printk+0x0/0x39 returned 0 after 0 usecs
installing Xen timer for CPU 1
SMP alternatives: switching to SMP code
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 1/0x0 -> Node 0
CPU: Unsupported number of siblings 16
mce: CPU supports 9 MCE banks
installing Xen timer for CPU 2
Initializing CPU#2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 2/0x0 -> Node 0
CPU: Unsupported number of siblings 16
mce: CPU supports 9 MCE banks
installing Xen timer for CPU 3
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 3/0x0 -> Node 0
CPU: Unsupported number of siblings 16
mce: CPU supports 9 MCE banks
installing Xen timer for CPU 4
Initializing CPU#4
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 4/0x0 -> Node 0
CPU: Unsupported number of siblings 16
mce: CPU supports 9 MCE banks
installing Xen timer for CPU 5
Initializing CPU#5
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 5/0x0 -> Node 0
CPU: Unsupported number of siblings 16
mce: CPU supports 9 MCE banks
installing Xen timer for CPU 6
Initializing CPU#6
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 6/0x0 -> Node 0
CPU: Unsupported number of siblings 16
mce: CPU supports 9 MCE banks
installing Xen timer for CPU 7
Initializing CPU#7
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 7/0x0 -> Node 0
CPU: Unsupported number of siblings 16
mce: CPU supports 9 MCE banks
Brought up 8 CPUs
CPU0 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 0 1 2 3 4 5 6 7
CPU1 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 1 2 3 4 5 6 7 0
CPU2 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 2 3 4 5 6 7 0 1
CPU3 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 3 4 5 6 7 0 1 2
CPU4 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 4 5 6 7 0 1 2 3
CPU5 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 5 6 7 0 1 2 3 4
CPU6 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 6 7 0 1 2 3 4 5
CPU7 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 7 0 1 2 3 4 5 6
calling init_mmap_min_addr+0x0/0x4e @ 1
initcall init_mmap_min_addr+0x0/0x4e returned 0 after 0 usecs
calling init_cpufreq_transition_notifier_list+0x0/0x43 @ 1
initcall init_cpufreq_transition_notifier_list+0x0/0x43 returned 0 after 976 usecs
calling net_ns_init+0x0/0x162 @ 1
initcall net_ns_init+0x0/0x162 returned 0 after 0 usecs
calling e820_mark_nvs_memory+0x0/0x65 @ 1
initcall e820_mark_nvs_memory+0x0/0x65 returned 0 after 976 usecs
calling cpufreq_tsc+0x0/0x28 @ 1
initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs
calling pci_reboot_init+0x0/0x3c @ 1
initcall pci_reboot_init+0x0/0x3c returned 0 after 0 usecs
calling init_lapic_sysfs+0x0/0x67 @ 1
initcall init_lapic_sysfs+0x0/0x67 returned 0 after 976 usecs
calling print_banner+0x0/0xe @ 1
Booting paravirtualized kernel on Xen
Xen version: 4.0.0 (preserve-AD) (dom0)
initcall print_banner+0x0/0xe returned 0 after 976 usecs
calling alloc_frozen_cpus+0x0/0x2e @ 1
initcall alloc_frozen_cpus+0x0/0x2e returned 0 after 0 usecs
calling sysctl_init+0x0/0x3e @ 1
initcall sysctl_init+0x0/0x3e returned 0 after 0 usecs
calling ksysfs_init+0x0/0xe1 @ 1
initcall ksysfs_init+0x0/0xe1 returned 0 after 0 usecs
calling async_init+0x0/0x80 @ 1
initcall async_init+0x0/0x80 returned 0 after 976 usecs
calling init_jiffies_clocksource+0x0/0x39 @ 1
initcall init_jiffies_clocksource+0x0/0x39 returned 0 after 0 usecs
calling pm_init+0x0/0x70 @ 1
initcall pm_init+0x0/0x70 returned 0 after 0 usecs
calling pm_disk_init+0x0/0x40 @ 1
initcall pm_disk_init+0x0/0x40 returned 0 after 0 usecs
calling swsusp_header_init+0x0/0x54 @ 1
initcall swsusp_header_init+0x0/0x54 returned 0 after 0 usecs
calling filelock_init+0x0/0x56 @ 1
initcall filelock_init+0x0/0x56 returned 0 after 976 usecs
calling init_misc_binfmt+0x0/0x64 @ 1
initcall init_misc_binfmt+0x0/0x64 returned 0 after 0 usecs
calling init_script_binfmt+0x0/0x3b @ 1
initcall init_script_binfmt+0x0/0x3b returned 0 after 0 usecs
calling init_elf_binfmt+0x0/0x3b @ 1
initcall init_elf_binfmt+0x0/0x3b returned 0 after 0 usecs
calling init_compat_elf_binfmt+0x0/0x3b @ 1
initcall init_compat_elf_binfmt+0x0/0x3b returned 0 after 0 usecs
calling debugfs_init+0x0/0x7b @ 1
initcall debugfs_init+0x0/0x7b returned 0 after 0 usecs
calling securityfs_init+0x0/0x72 @ 1
initcall securityfs_init+0x0/0x72 returned 0 after 0 usecs
calling random32_init+0x0/0xf6 @ 1
initcall random32_init+0x0/0xf6 returned 0 after 0 usecs
calling gnttab_init+0x0/0x1fa @ 1
Grant tables using version 2 layout.
Grant table initialized
initcall gnttab_init+0x0/0x1fa returned 0 after 1952 usecs
calling cpufreq_core_init+0x0/0x98 @ 1
initcall cpufreq_core_init+0x0/0x98 returned 0 after 0 usecs
calling cpuidle_init+0x0/0x61 @ 1
initcall cpuidle_init+0x0/0x61 returned 0 after 0 usecs
calling sock_init+0x0/0x86 @ 1
initcall sock_init+0x0/0x86 returned 0 after 976 usecs
calling netpoll_init+0x0/0x58 @ 1
initcall netpoll_init+0x0/0x58 returned 0 after 0 usecs
calling netlink_proto_init+0x0/0x1ce @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x1ce returned 0 after 976 usecs
calling bdi_class_init+0x0/0x69 @ 1
initcall bdi_class_init+0x0/0x69 returned 0 after 976 usecs
calling kobject_uevent_init+0x0/0x7c @ 1
initcall kobject_uevent_init+0x0/0x7c returned 0 after 976 usecs
calling pcibus_class_init+0x0/0x40 @ 1
initcall pcibus_class_init+0x0/0x40 returned 0 after 976 usecs
calling pci_driver_init+0x0/0x39 @ 1
initcall pci_driver_init+0x0/0x39 returned 0 after 976 usecs
calling backlight_class_init+0x0/0x85 @ 1
initcall backlight_class_init+0x0/0x85 returned 0 after 976 usecs
calling xenbus_probe_init+0x0/0x27c @ 1
xenbus_probe_init ok
initcall xenbus_probe_init+0x0/0x27c returned 0 after 976 usecs
calling tty_class_init+0x0/0x59 @ 1
initcall tty_class_init+0x0/0x59 returned 0 after 976 usecs
calling vtconsole_class_init+0x0/0xe5 @ 1
initcall vtconsole_class_init+0x0/0xe5 returned 0 after 976 usecs
calling register_node_type+0x0/0x88 @ 1
initcall register_node_type+0x0/0x88 returned 0 after 976 usecs
calling amd_postcore_init+0x0/0x83f @ 1
initcall amd_postcore_init+0x0/0x83f returned 0 after 0 usecs
calling arch_kdebugfs_init+0x0/0x4c @ 1
initcall arch_kdebugfs_init+0x0/0x4c returned 0 after 0 usecs
calling mtrr_if_init+0x0/0x8b @ 1
initcall mtrr_if_init+0x0/0x8b returned 0 after 0 usecs
calling ffh_cstate_init+0x0/0x52 @ 1
initcall ffh_cstate_init+0x0/0x52 returned 0 after 976 usecs
calling acpi_pci_init+0x0/0x7d @ 1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x7d returned 0 after 976 usecs
calling register_xen_pci_notifier+0x0/0x60 @ 1
initcall register_xen_pci_notifier+0x0/0x60 returned 0 after 0 usecs
calling setup_vcpu_hotplug_event+0x0/0x4a @ 1
initcall setup_vcpu_hotplug_event+0x0/0x4a returned 0 after 0 usecs
calling dmi_id_init+0x0/0x35e @ 1
initcall dmi_id_init+0x0/0x35e returned 0 after 976 usecs
calling pci_arch_init+0x0/0x81 @ 1
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
initcall pci_arch_init+0x0/0x81 returned 0 after 41985 usecs
calling topology_init+0x0/0xa7 @ 1
initcall topology_init+0x0/0xa7 returned 0 after 976 usecs
calling mtrr_init_finialize+0x0/0x65 @ 1
initcall mtrr_init_finialize+0x0/0x65 returned 0 after 0 usecs
calling param_sysfs_init+0x0/0x22e @ 1
initcall param_sysfs_init+0x0/0x22e returned 0 after 5858 usecs
calling pm_sysrq_init+0x0/0x41 @ 1
initcall pm_sysrq_init+0x0/0x41 returned 0 after 0 usecs
calling audit_watch_init+0x0/0x57 @ 1
initcall audit_watch_init+0x0/0x57 returned 0 after 0 usecs
calling init_slow_work+0x0/0x69 @ 1
initcall init_slow_work+0x0/0x69 returned 0 after 0 usecs
calling default_bdi_init+0x0/0x5a @ 1
initcall default_bdi_init+0x0/0x5a returned 0 after 976 usecs
calling init_bio+0x0/0x14f @ 1
bio: create slab <bio-0> at 0
initcall init_bio+0x0/0x14f returned 0 after 976 usecs
calling fsnotify_init+0x0/0x39 @ 1
initcall fsnotify_init+0x0/0x39 returned 0 after 976 usecs
calling fsnotify_notification_init+0x0/0x90 @ 1
initcall fsnotify_notification_init+0x0/0x90 returned 0 after 976 usecs
calling cryptomgr_init+0x0/0x39 @ 1
initcall cryptomgr_init+0x0/0x39 returned 0 after 0 usecs
calling blk_settings_init+0x0/0x52 @ 1
initcall blk_settings_init+0x0/0x52 returned 0 after 0 usecs
calling blk_ioc_init+0x0/0x52 @ 1
initcall blk_ioc_init+0x0/0x52 returned 0 after 976 usecs
calling blk_softirq_init+0x0/0x8f @ 1
initcall blk_softirq_init+0x0/0x8f returned 0 after 0 usecs
calling genhd_device_init+0x0/0x9e @ 1
initcall genhd_device_init+0x0/0x9e returned 0 after 976 usecs
calling pci_slot_init+0x0/0x6d @ 1
initcall pci_slot_init+0x0/0x6d returned 0 after 0 usecs
calling fbmem_init+0x0/0xb9 @ 1
initcall fbmem_init+0x0/0xb9 returned 0 after 976 usecs
calling acpi_init+0x0/0x27f @ 1
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff8102f6cf>] add_pin_to_irq_node+0x24/0xaf
PGD 0
Oops: 0000 [#1] SMP
last sysfs file:
CPU 0
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.31.13-xen #3 HP EliteBook 8740w
RIP: e030:[<ffffffff8102f6cf>] [<ffffffff8102f6cf>] add_pin_to_irq_node+0x24/0xaf
RSP: e02b:ffff88016d4b1d90 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000009 RCX: 0000000000000009
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001
R10: 000000000000000f R11: 0000000000000002 R12: 0000000000000009
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000009
FS: 0000000000000000(0000) GS:ffffc90000000000(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002660
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff88016d4b0000, task ffff88016d4a8000)
Stack:
ffff88016d688f50 ffffffff811699c1 000000006d1e3e68 0000000000000009
<0> 0000000000000000 0000000000000001 ffffffff8156b900 ffffffff81030e36
<0> ffffffffffffffff 0000000000000049 000000006d1e3e68 0000000000000009
Call Trace:
[<ffffffff811699c1>] ? internal_create_group+0xf4/0x174
[<ffffffff81030e36>] ? setup_IO_APIC_irq_extra+0xcd/0x153
[<ffffffff8121c4ba>] ? acpi_ev_sci_xrupt_handler+0x0/0x4a
[<ffffffff8102a863>] ? acpi_gsi_to_irq+0x24/0x40
[<ffffffff8120aa37>] ? acpi_os_install_interrupt_handler+0x36/0xbd
[<ffffffff8169468b>] ? acpi_init+0x0/0x27f
[<ffffffff8121b89e>] ? acpi_ev_install_xrupt_handlers+0x1a/0x79
[<ffffffff8169468b>] ? acpi_init+0x0/0x27f
[<ffffffff8169470b>] ? acpi_init+0x80/0x27f
[<ffffffff8169468b>] ? acpi_init+0x0/0x27f
[<ffffffff81076dd5>] ? ktime_get+0x1c/0x66
[<ffffffff8169468b>] ? acpi_init+0x0/0x27f
[<ffffffff8100a092>] ? do_one_initcall+0x64/0x17c
[<ffffffff816677a8>] ? kernel_init+0x14f/0x1be
[<ffffffff81014fea>] ? child_rip+0xa/0x20
[<ffffffff810141a7>] ? int_ret_from_sys_call+0x7/0x1b
[<ffffffff8101495d>] ? retint_restore_args+0x5/0x6
[<ffffffff81014fe0>] ? child_rip+0x0/0x20
Code: 5b 5d 41 5c 41 5d c3 41 55 49 89 fd 89 f7 41 54 41 89 cc 55 89 d5 53 48 83 ec 18 65 48 8b 04 25 28 00 00 00 48 89 44 24 10 31 c0 <49> 8b 5d 00 48 85 db 75 4a e8 35 ff ff ff 48 85 c0 75 2d 48 8b
RIP [<ffffffff8102f6cf>] add_pin_to_irq_node+0x24/0xaf
RSP <ffff88016d4b1d90>
CR2: 0000000000000000
---[ end trace f17e946d22a56015 ]---
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: swapper Tainted: G D 2.6.31.13-xen #3
Call Trace:
[<ffffffff810581a2>] ? panic+0x96/0x153
[<ffffffff8100f2e2>] ? check_events+0x12/0x20
[<ffffffff813b6ebb>] ? _write_lock_irq+0x1b/0x43
[<ffffffff81064104>] ? exit_ptrace+0x9a/0x119
[<ffffffff813b6ebb>] ? _write_lock_irq+0x1b/0x43
[<ffffffff8105bb09>] ? do_exit+0x82/0x618
[<ffffffff813b8093>] ? oops_end+0xc4/0xe0
[<ffffffff81038d2c>] ? no_context+0x1fe/0x222
[<ffffffff813b73c5>] ? page_fault+0x25/0x30
[<ffffffff8102f6cf>] ? add_pin_to_irq_node+0x24/0xaf
[<ffffffff811699c1>] ? internal_create_group+0xf4/0x174
[<ffffffff81030e36>] ? setup_IO_APIC_irq_extra+0xcd/0x153
[<ffffffff8121c4ba>] ? acpi_ev_sci_xrupt_handler+0x0/0x4a
[<ffffffff8102a863>] ? acpi_gsi_to_irq+0x24/0x40
[<ffffffff8120aa37>] ? acpi_os_install_interrupt_handler+0x36/0xbd
[<ffffffff8169468b>] ? acpi_init+0x0/0x27f
[<ffffffff8121b89e>] ? acpi_ev_install_xrupt_handlers+0x1a/0x79
[<ffffffff8169468b>] ? acpi_init+0x0/0x27f
[<ffffffff8169470b>] ? acpi_init+0x80/0x27f
[<ffffffff8169468b>] ? acpi_init+0x0/0x27f
[<ffffffff81076dd5>] ? ktime_get+0x1c/0x66
[<ffffffff8169468b>] ? acpi_init+0x0/0x27f
[<ffffffff8100a092>] ? do_one_initcall+0x64/0x17c
[<ffffffff816677a8>] ? kernel_init+0x14f/0x1be
[<ffffffff81014fea>] ? child_rip+0xa/0x20
[<ffffffff810141a7>] ? int_ret_from_sys_call+0x7/0x1b
[<ffffffff8101495d>] ? retint_restore_args+0x5/0x6
[<ffffffff81014fe0>] ? child_rip+0x0/0x20
[-- Attachment #3: Pol1-L.TXT --]
[-- Type: text/plain, Size: 52543 bytes --]
^[[0m^[[37m^[[40m^[[2J^[[01;01H^[[=3h^[[2J^[[01;01H^[[2J^[[01;01H^[[=3h^[[2J^[[01;01H __ __ _ _ ___ ___
\ \/ /___ _ __ | || | / _ \ / _ \
\ // _ \ '_ \ | || |_| | | | | | |
/ \ __/ | | | |__ _| |_| | |_| |
/_/\_\___|_| |_| |_|(_)___(_)___/
(XEN) Xen version 4.0.0 (root@localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) Wed Jun 30 16:31:17 CDT 2010
(XEN) Latest ChangeSet: unavailable
(XEN) Console output is synchronous.
(XEN) Command line: iommu=required loglvl=all guest_loglvl=all sync_console console_to_ring com1=115200,8n1 console=com1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 000000000009fc00 - 00000000000a0000 (reserved)
(XEN) 00000000000ef000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bbdd4000 (usable)
(XEN) 00000000bbdd4000 - 00000000bbec2000 (reserved)
(XEN) 00000000bbec2000 - 00000000bbfc2000 (ACPI NVS)
(XEN) 00000000bbfc2000 - 00000000bbfff000 (ACPI data)
(XEN) 00000000bbfff000 - 00000000bc000000 (usable)
(XEN) 00000000bc000000 - 00000000c0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fed10000 - 00000000fed14000 (reserved)
(XEN) 00000000fed19000 - 00000000fed1a000 (reserved)
(XEN) 00000000fed1b000 - 00000000fed20000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ffd00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 00000001c0000000 (usable)
(XEN) ACPI: RSDP 000F2AE0, 0024 (r2 HPQOEM)
(XEN) ACPI: XSDT BBFFE120, 0094 (r1 HPQOEM SLIC-MPC F 1000013)
(XEN) ACPI: FACP BBFFC000, 00F4 (r3 HPQOEM 1520 F HP 1)
(XEN) ACPI: DSDT BBFDB000, 1BCEC (r2 HPQOEM 1520 1 INTL 20060912)
(XEN) ACPI: FACS BBF41000, 0040
(XEN) ACPI: HPET BBFFB000, 0038 (r1 HPQOEM 1520 1 HP 1)
(XEN) ACPI: APIC BBFFA000, 00BC (r1 HPQOEM 1520 1 HP 1)
(XEN) ACPI: MCFG BBFF9000, 003C (r1 HPQOEM 1520 1 HP 1)
(XEN) ACPI: TCPA BBFF7000, 0032 (r2 HPQOEM 1520 0 HP 1)
(XEN) ACPI: SSDT BBFD8000, 0135 (r1 HPQOEM SataAhci 1000 INTL 20060912)
(XEN) ACPI: SSDT BBFD7000, 0314 (r1 HPQOEM PtidDevc 1000 INTL 20060912)
(XEN) ACPI: SLIC BBFD6000, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1)
(XEN) ACPI: SSDT BBFD2000, 2566 (r1 HPQOEM NVIDIAGF 1 INTL 20060912)
(XEN) ACPI: DMAR BBFD1000, 0068 (r1 INTEL CP_FIELD 1 INTL 1)
(XEN) ACPI: SSDT BBFD0000, 0A10 (r1 PmRef CpuPm 3000 INTL 20060912)
(XEN) ACPI: SSDT BBFCF000, 0288 (r1 PmRef Cpu0Tst 3000 INTL 20060912)
(XEN) ACPI: SSDT BBFCE000, 0225 (r1 PmRef ApTst 3000 INTL 20060912)
(XEN) ACPI: ASF! BBFF8000, 00A0 (r32 HPQOEM 1520 1 HP 1)
(XEN) System RAM: 6050MB (6196088kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-00000001c0000000
(XEN) Domain heap initialised
(XEN) DMI 2.6 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x408
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0]
(XEN) ACPI: wakeup_vec[bbf4100c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
(XEN) Processor #3 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
(XEN) Processor #4 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
(XEN) Processor #5 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
(XEN) Processor #6 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
(XEN) Processor #7 7:14 APIC version 21
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) [VT-D]dmar.c:504: RMRR address range not in reserved memory base = 0 end = fff; iommu_inclusive_mapping=1 parameter may be needed.
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 1729.032 MHz processor.
(XEN) Initing memory sharing.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Intel machine check reporting enabled
(XEN) Intel VT-d Snoop Control supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation supported.
(XEN) Intel VT-d Interrupt Remapping not supported.
(XEN) I/O virtualisation enabled
(XEN) I/O virtualisation for PV guests disabled
(XEN) Total of 8 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) TSC is reliable, synchronization unnecessary
(XEN) Platform timer is 14.318MHz HPET
ÿ(XEN) Allocated console ring of 64 KiB.
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) microcode.c:73:d32767 microcode: CPU5 resumed
(XEN) microcode.c:73:d32767 microcode: CPU4 resumed
(XEN) Brought up 8 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU7 resumed
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) microcode.c:73:d32767 microcode: CPU6 resumed
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
(XEN) Turbo Mode detected!
(XEN) HPET: 8 timers in total, 8 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1884000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 00000001b4000000->00000001b8000000 (1484563 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81884000
(XEN) Init. ramdisk: ffffffff81884000->ffffffff82051400
(XEN) Phys-Mach map: ffffffff82052000->ffffffff82bc5898
(XEN) Start info: ffffffff82bc6000->ffffffff82bc64b4
(XEN) Page tables: ffffffff82bc7000->ffffffff82be2000
(XEN) Boot stack: ffffffff82be2000->ffffffff82be3000
(XEN) TOTAL: ffffffff80000000->ffffffff83000000
(XEN) ENTRY ADDRESS: ffffffff81666de0
(XEN) Dom0 has maximum 8 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 156kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
(XEN) io_apic.c:2290:
(XEN) ioapic_guest_write: apic=0, pin=2, irq=0
(XEN) ioapic_guest_write: new_entry=000109f0
(XEN) ioapic_guest_write: old_entry=000009f0 pirq=0
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) irq.c:1445: dom0: pirq 0 or irq 3 already mapped
(XEN) io_apic.c:2290:
(XEN) ioapic_guest_write: apic=0, pin=4, irq=4
(XEN) ioapic_guest_write: new_entry=000109f1
(XEN) ioapic_guest_write: old_entry=000009f1 pirq=0
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) irq.c:1445: dom0: pirq 0 or irq 5 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 6 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 7 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 8 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 9 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 10 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 11 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 12 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 13 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 14 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 15 already mapped
(XEN) allocated vector 21 for irq 16
(XEN) irq.c:1445: dom0: pirq 0 or irq 16 already mapped
(XEN) allocated vector 29 for irq 17
(XEN) irq.c:1445: dom0: pirq 0 or irq 17 already mapped
(XEN) allocated vector 31 for irq 19
(XEN) irq.c:1445: dom0: pirq 0 or irq 19 already mapped
(XEN) allocated vector 39 for irq 20
(XEN) irq.c:1445: dom0: pirq 0 or irq 20 already mapped
(XEN) allocated vector 41 for irq 21
(XEN) irq.c:1445: dom0: pirq 0 or irq 21 already mapped
(XEN) allocated vector 49 for irq 22
(XEN) irq.c:1445: dom0: pirq 0 or irq 22 already mapped
(XEN) allocated vector 51 for irq 23
(XEN) irq.c:1445: dom0: pirq 0 or irq 23 already mapped
(XEN) io_apic.c:2290:
(XEN) ioapic_guest_write: apic=0, pin=0, irq=0
(XEN) ioapic_guest_write: new_entry=000009f0
(XEN) ioapic_guest_write: old_entry=00010260 pirq=0
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2290:
(XEN) ioapic_guest_write: apic=0, pin=2, irq=0
(XEN) ioapic_guest_write: new_entry=0001a9f0
(XEN) ioapic_guest_write: old_entry=000009f0 pirq=2
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
Linux version 2.6.31.13-xen (root@localhost.localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #4 SMP Tue Jul 13 13:00:24 CDT 2010
Command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed
xen_release_chunk: looking at area pfn f0000-fec00: 60416 pages freed
xen_release_chunk: looking at area pfn fec01-fed10: 271 pages freed
xen_release_chunk: looking at area pfn fed14-fed19: 5 pages freed
xen_release_chunk: looking at area pfn fed1a-fed1b: 1 pages freed
xen_release_chunk: looking at area pfn fed20-fee00: 224 pages freed
xen_release_chunk: looking at area pfn fee01-ffd00: 3839 pages freed
released 195828 pages of unused memory
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000000009fc00 (usable)
Xen: 000000000009fc00 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 00000000bbdd4000 (usable)
Xen: 00000000bbdd4000 - 00000000bbec2000 (reserved)
Xen: 00000000bbec2000 - 00000000bbfc2000 (ACPI NVS)
Xen: 00000000bbfc2000 - 00000000bbfff000 (ACPI data)
Xen: 00000000bbfff000 - 00000000bc000000 (usable)
Xen: 00000000bc000000 - 00000000c0000000 (reserved)
Xen: 00000000e0000000 - 00000000f0000000 (reserved)
Xen: 00000000fec00000 - 00000000fec01000 (reserved)
Xen: 00000000fed10000 - 00000000fed14000 (reserved)
Xen: 00000000fed19000 - 00000000fed1a000 (reserved)
Xen: 00000000fed1b000 - 00000000fed20000 (reserved)
Xen: 00000000fee00000 - 00000000fee01000 (reserved)
Xen: 00000000ffd00000 - 0000000100000000 (reserved)
Xen: 0000000100000000 - 000000016e713000 (usable)
DMI 2.6 present.
last_pfn = 0x16e713 max_arch_pfn = 0x400000000
last_pfn = 0xbc000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bc000000
0000000000 - 00bc000000 page 4k
kernel direct mapping tables up to bc000000 @ 100000-6e4000
init_memory_mapping: 0000000100000000-000000016e713000
0100000000 - 016e713000 page 4k
kernel direct mapping tables up to 16e713000 @ 2be2000-375d000
RAMDISK: 01884000 - 02051400
ACPI: RSDP 00000000000f2ae0 00024 (v02 HPQOEM)
ACPI: XSDT 00000000bbffe120 00094 (v01 HPQOEM SLIC-MPC 0000000F 01000013)
ACPI: FACP 00000000bbffc000 000F4 (v03 HPQOEM 1520 0000000F HP 00000001)
ACPI: DSDT 00000000bbfdb000 1BCEC (v02 HPQOEM 1520 00000001 INTL 20060912)
ACPI: FACS 00000000bbf41000 00040
ACPI: HPET 00000000bbffb000 00038 (v01 HPQOEM 1520 00000001 HP 00000001)
ACPI: APIC 00000000bbffa000 000BC (v01 HPQOEM 1520 00000001 HP 00000001)
ACPI: MCFG 00000000bbff9000 0003C (v01 HPQOEM 1520 00000001 HP 00000001)
ACPI: TCPA 00000000bbff7000 00032 (v02 HPQOEM 1520 00000000 HP 00000001)
ACPI: SSDT 00000000bbfd8000 00135 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
ACPI: SSDT 00000000bbfd7000 00314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
ACPI: SLIC 00000000bbfd6000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: SSDT 00000000bbfd2000 02566 (v01 HPQOEM NVIDIAGF 00000001 INTL 20060912)
ACPI: 00000000bbfd1000 00068 (v01 INTEL CP_FIELD 00000001 INTL 00000001)
ACPI: SSDT 00000000bbfd0000 00A10 (v01 PmRef CpuPm 00003000 INTL 20060912)
ACPI: SSDT 00000000bbfcf000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
ACPI: SSDT 00000000bbfce000 00225 (v01 PmRef ApTst 00003000 INTL 20060912)
ACPI: ASF! 00000000bbff8000 000A0 (v32 HPQOEM 1520 00000001 HP 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000016e713000
Bootmem setup node 0 0000000000000000-000000016e713000
NODE_DATA [0000000000001000 - 0000000000005fff]
bootmap [0000000000008000 - 0000000000035ce7] pages 2e
(9 early reservations) ==> bootmem [0000000000 - 016e713000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0002bc7000 - 0002be2000] XEN PAGETABLES ==> [0002bc7000 - 0002be2000]
#2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#3 [0001000000 - 0001863170] TEXT DATA BSS ==> [0001000000 - 0001863170]
#4 [0001884000 - 0002051400] RAMDISK ==> [0001884000 - 0002051400]
#5 [0002052000 - 0002bc7000] XEN START INFO ==> [0002052000 - 0002bc7000]
#6 [0001864000 - 0001864229] BRK ==> [0001864000 - 0001864229]
#7 [0000100000 - 00006c6000] PGTABLE ==> [0000100000 - 00006c6000]
#8 [0002be2000 - 0002f58000] PGTABLE ==> [0002be2000 - 0002f58000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0016e713
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x000bbdd4
0: 0x000bbfff -> 0x000bc000
0: 0x00100000 -> 0x0016e713
On node 0 totalpages: 1221767
DMA zone: 56 pages used for memmap
DMA zone: 1481 pages reserved
DMA zone: 2462 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 751117 pages, LIFO batch:31
Normal zone: 6185 pages used for memmap
Normal zone: 446186 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000bbdd4000 - 00000000bbec2000
PM: Registered nosave memory: 00000000bbec2000 - 00000000bbfc2000
PM: Registered nosave memory: 00000000bbfc2000 - 00000000bbfff000
PM: Registered nosave memory: 00000000bc000000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed19000
PM: Registered nosave memory: 00000000fed19000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffd00000
PM: Registered nosave memory: 00000000ffd00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Allocated 22 4k pages, static data 89056 bytes
trying to map vcpu_info 0 at ffffc9000000b020, mfn 192dc2, offset 32
cpu 0 using vcpu_info at ffffc9000000b020
trying to map vcpu_info 1 at ffffc90000023020, mfn 192dd8, offset 32
cpu 1 using vcpu_info at ffffc90000023020
trying to map vcpu_info 2 at ffffc9000003b020, mfn 192dee, offset 32
cpu 2 using vcpu_info at ffffc9000003b020
trying to map vcpu_info 3 at ffffc90000053020, mfn 192a04, offset 32
cpu 3 using vcpu_info at ffffc90000053020
trying to map vcpu_info 4 at ffffc9000006b020, mfn 192a1a, offset 32
cpu 4 using vcpu_info at ffffc9000006b020
trying to map vcpu_info 5 at ffffc90000083020, mfn 192a30, offset 32
cpu 5 using vcpu_info at ffffc90000083020
trying to map vcpu_info 6 at ffffc9000009b020, mfn 192a46, offset 32
cpu 6 using vcpu_info at ffffc9000009b020
trying to map vcpu_info 7 at ffffc900000b3020, mfn 192a5c, offset 32
cpu 7 using vcpu_info at ffffc900000b3020
Xen: using vcpu_info placement
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1199765
Policy zone: Normal
Kernel command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1
PID hash table entries: 4096 (order: 12, 32768 bytes)
Initializing CPU#0
PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB)
xen_swiotlb_fixup: buf=ffff880020000000 size=67108864
xen_swiotlb_fixup: buf=ffff880024060000 size=32768
Placing 64MB Xen software IO TLB between ffff880020000000 - ffff880024000000
Xen software IO TLB at phys 0x20000000 - 0x24000000
Memory: 4714016k/6003788k available (3831k kernel code, 1116720k absent, 173052k reserved, 2628k data, 616k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304
xen: registering gsi 0 triggering 1 polarity 0
xen: --> irq=0
xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0
xen: registering gsi 1 triggering 1 polarity 0
xen: --> irq=1
xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0
xen_setup_pirqs: IRQ: 2 bus_irq != global_irq!
xen: registering gsi 2 triggering 0 polarity 1
xen: --> irq=2
xen_set_ioapic_routing: irq 2 gsi 2 vector 2 ioapic 0 pin 2 triggering 1 polarity 1
xen: registering gsi 3 triggering 1 polarity 0
xen: --> irq=3
xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3 triggering 0 polarity 0
xen: registering gsi 4 triggering 1 polarity 0
xen: --> irq=4
xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0
xen: registering gsi 5 triggering 1 polarity 0
xen: --> irq=5
xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5 triggering 0 polarity 0
xen: registering gsi 6 triggering 1 polarity 0
xen: --> irq=6
xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0
xen: registering gsi 7 triggering 1 polarity 0
xen: --> irq=7
xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7 triggering 0 polarity 0
xen: registering gsi 8 triggering 1 polarity 0
xen: --> irq=8
xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0
xen: registering gsi 9 triggering 0 polarity 0
xen: --> irq=9
xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9 triggering 1 polarity 0
xen: registering gsi 10 triggering 1 polarity 0
xen: --> irq=10
xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin 10 triggering 0 polarity 0
xen: registering gsi 11 triggering 1 polarity 0
xen: --> irq=11
xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin 11 triggering 0 polarity 0
xen: registering gsi 12 triggering 1 polarity 0
xen: --> irq=12
xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0
xen: registering gsi 13 triggering 1 polarity 0
xen: --> irq=13
xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0
xen: registering gsi 14 triggering 1 polarity 0
xen: --> irq=14
xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin 14 triggering 0 polarity 0
xen: registering gsi 15 triggering 1 polarity 0
xen: --> irq=15
xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin 15 triggering 0 polarity 0
Detected 1729.032 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [hvc0] enabled
console [ttyS0] enabled
Linux version 2.6.31.13-xen (root@localhost.localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #4 SMP Tue Jul 13 13:00:24 CDT 2010
Command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed
xen_release_chunk: looking at area pfn f0000-fec00: 60416 pages freed
xen_release_chunk: looking at area pfn fec01-fed10: 271 pages freed
xen_release_chunk: looking at area pfn fed14-fed19: 5 pages freed
xen_release_chunk: looking at area pfn fed1a-fed1b: 1 pages freed
xen_release_chunk: looking at area pfn fed20-fee00: 224 pages freed
xen_release_chunk: looking at area pfn fee01-ffd00: 3839 pages freed
released 195828 pages of unused memory
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000000009fc00 (usable)
Xen: 000000000009fc00 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 00000000bbdd4000 (usable)
Xen: 00000000bbdd4000 - 00000000bbec2000 (reserved)
Xen: 00000000bbec2000 - 00000000bbfc2000 (ACPI NVS)
Xen: 00000000bbfc2000 - 00000000bbfff000 (ACPI data)
Xen: 00000000bbfff000 - 00000000bc000000 (usable)
Xen: 00000000bc000000 - 00000000c0000000 (reserved)
Xen: 00000000e0000000 - 00000000f0000000 (reserved)
Xen: 00000000fec00000 - 00000000fec01000 (reserved)
Xen: 00000000fed10000 - 00000000fed14000 (reserved)
Xen: 00000000fed19000 - 00000000fed1a000 (reserved)
Xen: 00000000fed1b000 - 00000000fed20000 (reserved)
Xen: 00000000fee00000 - 00000000fee01000 (reserved)
Xen: 00000000ffd00000 - 0000000100000000 (reserved)
Xen: 0000000100000000 - 000000016e713000 (usable)
DMI 2.6 present.
last_pfn = 0x16e713 max_arch_pfn = 0x400000000
last_pfn = 0xbc000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bc000000
0000000000 - 00bc000000 page 4k
kernel direct mapping tables up to bc000000 @ 100000-6e4000
init_memory_mapping: 0000000100000000-000000016e713000
0100000000 - 016e713000 page 4k
kernel direct mapping tables up to 16e713000 @ 2be2000-375d000
RAMDISK: 01884000 - 02051400
ACPI: RSDP 00000000000f2ae0 00024 (v02 HPQOEM)
ACPI: XSDT 00000000bbffe120 00094 (v01 HPQOEM SLIC-MPC 0000000F 01000013)
ACPI: FACP 00000000bbffc000 000F4 (v03 HPQOEM 1520 0000000F HP 00000001)
ACPI: DSDT 00000000bbfdb000 1BCEC (v02 HPQOEM 1520 00000001 INTL 20060912)
ACPI: FACS 00000000bbf41000 00040
ACPI: HPET 00000000bbffb000 00038 (v01 HPQOEM 1520 00000001 HP 00000001)
ACPI: APIC 00000000bbffa000 000BC (v01 HPQOEM 1520 00000001 HP 00000001)
ACPI: MCFG 00000000bbff9000 0003C (v01 HPQOEM 1520 00000001 HP 00000001)
ACPI: TCPA 00000000bbff7000 00032 (v02 HPQOEM 1520 00000000 HP 00000001)
ACPI: SSDT 00000000bbfd8000 00135 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
ACPI: SSDT 00000000bbfd7000 00314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
ACPI: SLIC 00000000bbfd6000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: SSDT 00000000bbfd2000 02566 (v01 HPQOEM NVIDIAGF 00000001 INTL 20060912)
ACPI: 00000000bbfd1000 00068 (v01 INTEL CP_FIELD 00000001 INTL 00000001)
ACPI: SSDT 00000000bbfd0000 00A10 (v01 PmRef CpuPm 00003000 INTL 20060912)
ACPI: SSDT 00000000bbfcf000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
ACPI: SSDT 00000000bbfce000 00225 (v01 PmRef ApTst 00003000 INTL 20060912)
ACPI: ASF! 00000000bbff8000 000A0 (v32 HPQOEM 1520 00000001 HP 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000016e713000
Bootmem setup node 0 0000000000000000-000000016e713000
NODE_DATA [0000000000001000 - 0000000000005fff]
bootmap [0000000000008000 - 0000000000035ce7] pages 2e
(9 early reservations) ==> bootmem [0000000000 - 016e713000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0002bc7000 - 0002be2000] XEN PAGETABLES ==> [0002bc7000 - 0002be2000]
#2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#3 [0001000000 - 0001863170] TEXT DATA BSS ==> [0001000000 - 0001863170]
#4 [0001884000 - 0002051400] RAMDISK ==> [0001884000 - 0002051400]
#5 [0002052000 - 0002bc7000] XEN START INFO ==> [0002052000 - 0002bc7000]
#6 [0001864000 - 0001864229] BRK ==> [0001864000 - 0001864229]
#7 [0000100000 - 00006c6000] PGTABLE ==> [0000100000 - 00006c6000]
#8 [0002be2000 - 0002f58000] PGTABLE ==> [0002be2000 - 0002f58000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0016e713
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x000bbdd4
0: 0x000bbfff -> 0x000bc000
0: 0x00100000 -> 0x0016e713
On node 0 totalpages: 1221767
DMA zone: 56 pages used for memmap
DMA zone: 1481 pages reserved
DMA zone: 2462 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 751117 pages, LIFO batch:31
Normal zone: 6185 pages used for memmap
Normal zone: 446186 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000bbdd4000 - 00000000bbec2000
PM: Registered nosave memory: 00000000bbec2000 - 00000000bbfc2000
PM: Registered nosave memory: 00000000bbfc2000 - 00000000bbfff000
PM: Registered nosave memory: 00000000bc000000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed19000
PM: Registered nosave memory: 00000000fed19000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffd00000
PM: Registered nosave memory: 00000000ffd00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Allocated 22 4k pages, static data 89056 bytes
trying to map vcpu_info 0 at ffffc9000000b020, mfn 192dc2, offset 32
cpu 0 using vcpu_info at ffffc9000000b020
trying to map vcpu_info 1 at ffffc90000023020, mfn 192dd8, offset 32
cpu 1 using vcpu_info at ffffc90000023020
trying to map vcpu_info 2 at ffffc9000003b020, mfn 192dee, offset 32
cpu 2 using vcpu_info at ffffc9000003b020
trying to map vcpu_info 3 at ffffc90000053020, mfn 192a04, offset 32
cpu 3 using vcpu_info at ffffc90000053020
trying to map vcpu_info 4 at ffffc9000006b020, mfn 192a1a, offset 32
cpu 4 using vcpu_info at ffffc9000006b020
trying to map vcpu_info 5 at ffffc90000083020, mfn 192a30, offset 32
cpu 5 using vcpu_info at ffffc90000083020
trying to map vcpu_info 6 at ffffc9000009b020, mfn 192a46, offset 32
cpu 6 using vcpu_info at ffffc9000009b020
trying to map vcpu_info 7 at ffffc900000b3020, mfn 192a5c, offset 32
cpu 7 using vcpu_info at ffffc900000b3020
Xen: using vcpu_info placement
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1199765
Policy zone: Normal
Kernel command line: ro root=LABEL=/1 console=hvc0 debug initcall_debug console=tty0 console=ttyS0,115200,8n1
PID hash table entries: 4096 (order: 12, 32768 bytes)
Initializing CPU#0
PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB)
xen_swiotlb_fixup: buf=ffff880020000000 size=67108864
xen_swiotlb_fixup: buf=ffff880024060000 size=32768
Placing 64MB Xen software IO TLB between ffff880020000000 - ffff880024000000
Xen software IO TLB at phys 0x20000000 - 0x24000000
Memory: 4714016k/6003788k available (3831k kernel code, 1116720k absent, 173052k reserved, 2628k data, 616k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304
xen: registering gsi 0 triggering 1 polarity 0
xen: --> irq=0
xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0
xen: registering gsi 1 triggering 1 polarity 0
xen: --> irq=1
xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0
xen_setup_pirqs: IRQ: 2 bus_irq != global_irq!
xen: registering gsi 2 triggering 0 polarity 1
xen: --> irq=2
xen_set_ioapic_routing: irq 2 gsi 2 vector 2 ioapic 0 pin 2 triggering 1 polarity 1
xen: registering gsi 3 triggering 1 polarity 0
xen: --> irq=3
xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3 triggering 0 polarity 0
xen: registering gsi 4 triggering 1 polarity 0
xen: --> irq=4
xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0
xen: registering gsi 5 triggering 1 polarity 0
xen: --> irq=5
xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5 triggering 0 polarity 0
xen: registering gsi 6 triggering 1 polarity 0
xen: --> irq=6
xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0
xen: registering gsi 7 triggering 1 polarity 0
xen: --> irq=7
xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7 triggering 0 polarity 0
xen: registering gsi 8 triggering 1 polarity 0
xen: --> irq=8
xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0
xen: registering gsi 9 triggering 0 polarity 0
xen: --> irq=9
xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9 triggering 1 polarity 0
xen: registering gsi 10 triggering 1 polarity 0
xen: --> irq=10
xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin 10 triggering 0 polarity 0
xen: registering gsi 11 triggering 1 polarity 0
xen: --> irq=11
xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin 11 triggering 0 polarity 0
xen: registering gsi 12 triggering 1 polarity 0
xen: --> irq=12
xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0
xen: registering gsi 13 triggering 1 polarity 0
xen: --> irq=13
xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0
xen: registering gsi 14 triggering 1 polarity 0
xen: --> irq=14
xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin 14 triggering 0 polarity 0
xen: registering gsi 15 triggering 1 polarity 0
xen: --> irq=15
xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin 15 triggering 0 polarity 0
Detected 1729.032 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [hvc0] enabled
console [ttyS0] enabled
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
xen: vcpu_time_info placement not supported
Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.06 BogoMIPS (lpj=1729032)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 0/0x0 -> Node 0
CPU: Unsupported number of siblings 16
mce: CPU supports 9 MCE banks
Performance Counters: unsupported p6 CPU model 30 no PMU driver, software counters only.
SMP alternatives: switching to UP code
ACPI: Core revision 20090521
calling migration_init+0x0/0x80 @ 1
initcall migration_init+0x0/0x80 returned 1 after 976 usecs
initcall migration_init+0x0/0x80 returned with error code 1
calling spawn_ksoftirqd+0x0/0x7a @ 1
initcall spawn_ksoftirqd+0x0/0x7a returned 0 after 976 usecs
calling init_call_single_data+0x0/0xa8 @ 1
initcall init_call_single_data+0x0/0xa8 returned 0 after 0 usecs
calling spawn_softlockup_task+0x0/0x96 @ 1
initcall spawn_softlockup_task+0x0/0x96 returned 0 after 976 usecs
calling relay_init+0x0/0x3c @ 1
initcall relay_init+0x0/0x3c returned 0 after 0 usecs
calling tracer_alloc_buffers+0x0/0x18c @ 1
initcall tracer_alloc_buffers+0x0/0x18c returned 0 after 0 usecs
calling init_trace_printk+0x0/0x39 @ 1
initcall init_trace_printk+0x0/0x39 returned 0 after 0 usecs
installing Xen timer for CPU 1
SMP alternatives: switching to SMP code
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 1/0x0 -> Node 0
CPU: Unsupported number of siblings 16
mce: CPU supports 9 MCE banks
installing Xen timer for CPU 2
Initializing CPU#2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 2/0x0 -> Node 0
CPU: Unsupported number of siblings 16
mce: CPU supports 9 MCE banks
installing Xen timer for CPU 3
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 3/0x0 -> Node 0
CPU: Unsupported number of siblings 16
mce: CPU supports 9 MCE banks
installing Xen timer for CPU 4
Initializing CPU#4
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 4/0x0 -> Node 0
CPU: Unsupported number of siblings 16
mce: CPU supports 9 MCE banks
installing Xen timer for CPU 5
Initializing CPU#5
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 5/0x0 -> Node 0
CPU: Unsupported number of siblings 16
mce: CPU supports 9 MCE banks
installing Xen timer for CPU 6
Initializing CPU#6
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 6/0x0 -> Node 0
CPU: Unsupported number of siblings 16
mce: CPU supports 9 MCE banks
installing Xen timer for CPU 7
Initializing CPU#7
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 7/0x0 -> Node 0
CPU: Unsupported number of siblings 16
mce: CPU supports 9 MCE banks
Brought up 8 CPUs
CPU0 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 0 1 2 3 4 5 6 7
CPU1 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 1 2 3 4 5 6 7 0
CPU2 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 2 3 4 5 6 7 0 1
CPU3 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 3 4 5 6 7 0 1 2
CPU4 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 4 5 6 7 0 1 2 3
CPU5 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 5 6 7 0 1 2 3 4
CPU6 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 6 7 0 1 2 3 4 5
CPU7 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 7 0 1 2 3 4 5 6
calling init_mmap_min_addr+0x0/0x4e @ 1
initcall init_mmap_min_addr+0x0/0x4e returned 0 after 0 usecs
calling init_cpufreq_transition_notifier_list+0x0/0x43 @ 1
initcall init_cpufreq_transition_notifier_list+0x0/0x43 returned 0 after 976 usecs
calling net_ns_init+0x0/0x162 @ 1
initcall net_ns_init+0x0/0x162 returned 0 after 0 usecs
calling e820_mark_nvs_memory+0x0/0x65 @ 1
initcall e820_mark_nvs_memory+0x0/0x65 returned 0 after 976 usecs
calling cpufreq_tsc+0x0/0x28 @ 1
initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs
calling pci_reboot_init+0x0/0x3c @ 1
initcall pci_reboot_init+0x0/0x3c returned 0 after 0 usecs
calling init_lapic_sysfs+0x0/0x67 @ 1
initcall init_lapic_sysfs+0x0/0x67 returned 0 after 976 usecs
calling print_banner+0x0/0xe @ 1
Booting paravirtualized kernel on Xen
Xen version: 4.0.0 (preserve-AD) (dom0)
initcall print_banner+0x0/0xe returned 0 after 976 usecs
calling alloc_frozen_cpus+0x0/0x2e @ 1
initcall alloc_frozen_cpus+0x0/0x2e returned 0 after 0 usecs
calling sysctl_init+0x0/0x3e @ 1
initcall sysctl_init+0x0/0x3e returned 0 after 0 usecs
calling ksysfs_init+0x0/0xe1 @ 1
initcall ksysfs_init+0x0/0xe1 returned 0 after 0 usecs
calling async_init+0x0/0x80 @ 1
initcall async_init+0x0/0x80 returned 0 after 976 usecs
calling init_jiffies_clocksource+0x0/0x39 @ 1
initcall init_jiffies_clocksource+0x0/0x39 returned 0 after 0 usecs
calling pm_init+0x0/0x70 @ 1
initcall pm_init+0x0/0x70 returned 0 after 0 usecs
calling pm_disk_init+0x0/0x40 @ 1
initcall pm_disk_init+0x0/0x40 returned 0 after 0 usecs
calling swsusp_header_init+0x0/0x54 @ 1
initcall swsusp_header_init+0x0/0x54 returned 0 after 0 usecs
calling filelock_init+0x0/0x56 @ 1
initcall filelock_init+0x0/0x56 returned 0 after 976 usecs
calling init_misc_binfmt+0x0/0x64 @ 1
initcall init_misc_binfmt+0x0/0x64 returned 0 after 0 usecs
calling init_script_binfmt+0x0/0x3b @ 1
initcall init_script_binfmt+0x0/0x3b returned 0 after 0 usecs
calling init_elf_binfmt+0x0/0x3b @ 1
initcall init_elf_binfmt+0x0/0x3b returned 0 after 0 usecs
calling init_compat_elf_binfmt+0x0/0x3b @ 1
initcall init_compat_elf_binfmt+0x0/0x3b returned 0 after 0 usecs
calling debugfs_init+0x0/0x7b @ 1
initcall debugfs_init+0x0/0x7b returned 0 after 0 usecs
calling securityfs_init+0x0/0x72 @ 1
initcall securityfs_init+0x0/0x72 returned 0 after 0 usecs
calling random32_init+0x0/0xf6 @ 1
initcall random32_init+0x0/0xf6 returned 0 after 0 usecs
calling gnttab_init+0x0/0x1fa @ 1
Grant tables using version 2 layout.
Grant table initialized
initcall gnttab_init+0x0/0x1fa returned 0 after 1952 usecs
calling cpufreq_core_init+0x0/0x98 @ 1
initcall cpufreq_core_init+0x0/0x98 returned 0 after 0 usecs
calling cpuidle_init+0x0/0x61 @ 1
initcall cpuidle_init+0x0/0x61 returned 0 after 0 usecs
calling sock_init+0x0/0x86 @ 1
initcall sock_init+0x0/0x86 returned 0 after 976 usecs
calling netpoll_init+0x0/0x58 @ 1
initcall netpoll_init+0x0/0x58 returned 0 after 0 usecs
calling netlink_proto_init+0x0/0x1ce @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x1ce returned 0 after 976 usecs
calling bdi_class_init+0x0/0x69 @ 1
initcall bdi_class_init+0x0/0x69 returned 0 after 976 usecs
calling kobject_uevent_init+0x0/0x7c @ 1
initcall kobject_uevent_init+0x0/0x7c returned 0 after 976 usecs
calling pcibus_class_init+0x0/0x40 @ 1
initcall pcibus_class_init+0x0/0x40 returned 0 after 976 usecs
calling pci_driver_init+0x0/0x39 @ 1
initcall pci_driver_init+0x0/0x39 returned 0 after 976 usecs
calling backlight_class_init+0x0/0x85 @ 1
initcall backlight_class_init+0x0/0x85 returned 0 after 976 usecs
calling xenbus_probe_init+0x0/0x27c @ 1
xenbus_probe_init ok
initcall xenbus_probe_init+0x0/0x27c returned 0 after 976 usecs
calling tty_class_init+0x0/0x59 @ 1
initcall tty_class_init+0x0/0x59 returned 0 after 976 usecs
calling vtconsole_class_init+0x0/0xe5 @ 1
initcall vtconsole_class_init+0x0/0xe5 returned 0 after 976 usecs
calling register_node_type+0x0/0x88 @ 1
initcall register_node_type+0x0/0x88 returned 0 after 976 usecs
calling amd_postcore_init+0x0/0x83f @ 1
initcall amd_postcore_init+0x0/0x83f returned 0 after 0 usecs
calling arch_kdebugfs_init+0x0/0x4c @ 1
initcall arch_kdebugfs_init+0x0/0x4c returned 0 after 0 usecs
calling mtrr_if_init+0x0/0x8b @ 1
initcall mtrr_if_init+0x0/0x8b returned 0 after 0 usecs
calling ffh_cstate_init+0x0/0x52 @ 1
initcall ffh_cstate_init+0x0/0x52 returned 0 after 976 usecs
calling acpi_pci_init+0x0/0x7d @ 1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x7d returned 0 after 976 usecs
calling register_xen_pci_notifier+0x0/0x60 @ 1
initcall register_xen_pci_notifier+0x0/0x60 returned 0 after 0 usecs
calling setup_vcpu_hotplug_event+0x0/0x4a @ 1
initcall setup_vcpu_hotplug_event+0x0/0x4a returned 0 after 0 usecs
calling dmi_id_init+0x0/0x35e @ 1
initcall dmi_id_init+0x0/0x35e returned 0 after 976 usecs
calling pci_arch_init+0x0/0x81 @ 1
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
initcall pci_arch_init+0x0/0x81 returned 0 after 41985 usecs
calling topology_init+0x0/0xa7 @ 1
initcall topology_init+0x0/0xa7 returned 0 after 976 usecs
calling mtrr_init_finialize+0x0/0x65 @ 1
initcall mtrr_init_finialize+0x0/0x65 returned 0 after 0 usecs
calling param_sysfs_init+0x0/0x22e @ 1
initcall param_sysfs_init+0x0/0x22e returned 0 after 5858 usecs
calling pm_sysrq_init+0x0/0x41 @ 1
initcall pm_sysrq_init+0x0/0x41 returned 0 after 0 usecs
calling audit_watch_init+0x0/0x57 @ 1
initcall audit_watch_init+0x0/0x57 returned 0 after 0 usecs
calling init_slow_work+0x0/0x69 @ 1
initcall init_slow_work+0x0/0x69 returned 0 after 0 usecs
calling default_bdi_init+0x0/0x5a @ 1
initcall default_bdi_init+0x0/0x5a returned 0 after 976 usecs
calling init_bio+0x0/0x14f @ 1
bio: create slab <bio-0> at 0
initcall init_bio+0x0/0x14f returned 0 after 976 usecs
calling fsnotify_init+0x0/0x39 @ 1
initcall fsnotify_init+0x0/0x39 returned 0 after 976 usecs
calling fsnotify_notification_init+0x0/0x90 @ 1
initcall fsnotify_notification_init+0x0/0x90 returned 0 after 976 usecs
calling cryptomgr_init+0x0/0x39 @ 1
initcall cryptomgr_init+0x0/0x39 returned 0 after 0 usecs
calling blk_settings_init+0x0/0x52 @ 1
initcall blk_settings_init+0x0/0x52 returned 0 after 0 usecs
calling blk_ioc_init+0x0/0x52 @ 1
initcall blk_ioc_init+0x0/0x52 returned 0 after 976 usecs
calling blk_softirq_init+0x0/0x8f @ 1
initcall blk_softirq_init+0x0/0x8f returned 0 after 0 usecs
calling genhd_device_init+0x0/0x9e @ 1
initcall genhd_device_init+0x0/0x9e returned 0 after 976 usecs
calling pci_slot_init+0x0/0x6d @ 1
initcall pci_slot_init+0x0/0x6d returned 0 after 0 usecs
calling fbmem_init+0x0/0xb9 @ 1
initcall fbmem_init+0x0/0xb9 returned 0 after 976 usecs
calling acpi_init+0x0/0x27f @ 1
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff8102f6cf>] add_pin_to_irq_node+0x24/0xaf
PGD 0
Oops: 0000 [#1] SMP
last sysfs file:
CPU 0
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.31.13-xen #4 HP EliteBook 8740w
RIP: e030:[<ffffffff8102f6cf>] [<ffffffff8102f6cf>] add_pin_to_irq_node+0x24/0xaf
RSP: e02b:ffff88016d4b1d90 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000009 RCX: 0000000000000009
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001
R10: 000000000000000f R11: 0000000000000002 R12: 0000000000000009
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000009
FS: 0000000000000000(0000) GS:ffffc90000000000(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002660
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff88016d4b0000, task ffff88016d4a8000)
Stack:
ffff88016d688f50 ffffffff811699c1 000000001345139a 0000000000000009
<0> 0000000000000000 0000000000000001 ffffffff8156b900 ffffffff81030e36
<0> ffffffffffffffff 0000000000000049 000000001345139a 0000000000000009
Call Trace:
[<ffffffff811699c1>] ? internal_create_group+0xf4/0x174
[<ffffffff81030e36>] ? setup_IO_APIC_irq_extra+0xcd/0x153
[<ffffffff8121c4ba>] ? acpi_ev_sci_xrupt_handler+0x0/0x4a
[<ffffffff8102a863>] ? acpi_gsi_to_irq+0x24/0x40
[<ffffffff8120aa37>] ? acpi_os_install_interrupt_handler+0x36/0xbd
[<ffffffff8169468b>] ? acpi_init+0x0/0x27f
[<ffffffff8121b89e>] ? acpi_ev_install_xrupt_handlers+0x1a/0x79
[<ffffffff8169468b>] ? acpi_init+0x0/0x27f
[<ffffffff8169470b>] ? acpi_init+0x80/0x27f
[<ffffffff8169468b>] ? acpi_init+0x0/0x27f
[<ffffffff81076dd5>] ? ktime_get+0x1c/0x66
[<ffffffff8169468b>] ? acpi_init+0x0/0x27f
[<ffffffff8100a092>] ? do_one_initcall+0x64/0x17c
[<ffffffff816677a8>] ? kernel_init+0x14f/0x1be
[<ffffffff81014fea>] ? child_rip+0xa/0x20
[<ffffffff810141a7>] ? int_ret_from_sys_call+0x7/0x1b
[<ffffffff8101495d>] ? retint_restore_args+0x5/0x6
[<ffffffff81014fe0>] ? child_rip+0x0/0x20
Code: 5b 5d 41 5c 41 5d c3 41 55 49 89 fd 89 f7 41 54 41 89 cc 55 89 d5 53 48 83 ec 18 65 48 8b 04 25 28 00 00 00 48 89 44 24 10 31 c0 <49> 8b 5d 00 48 85 db 75 4a e8 35 ff ff ff 48 85 c0 75 2d 48 8b
RIP [<ffffffff8102f6cf>] add_pin_to_irq_node+0x24/0xaf
RSP <ffff88016d4b1d90>
CR2: 0000000000000000
---[ end trace f17e946d22a56015 ]---
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: swapper Tainted: G D 2.6.31.13-xen #4
Call Trace:
[<ffffffff810581a2>] ? panic+0x96/0x153
[<ffffffff8100f2e2>] ? check_events+0x12/0x20
[<ffffffff813b6ebb>] ? _write_lock_irq+0x1b/0x43
[<ffffffff81064104>] ? exit_ptrace+0x9a/0x119
[<ffffffff813b6ebb>] ? _write_lock_irq+0x1b/0x43
[<ffffffff8105bb09>] ? do_exit+0x82/0x618
[<ffffffff813b8093>] ? oops_end+0xc4/0xe0
[<ffffffff81038d2c>] ? no_context+0x1fe/0x222
[<ffffffff813b73c5>] ? page_fault+0x25/0x30
[<ffffffff8102f6cf>] ? add_pin_to_irq_node+0x24/0xaf
[<ffffffff811699c1>] ? internal_create_group+0xf4/0x174
[<ffffffff81030e36>] ? setup_IO_APIC_irq_extra+0xcd/0x153
[<ffffffff8121c4ba>] ? acpi_ev_sci_xrupt_handler+0x0/0x4a
[<ffffffff8102a863>] ? acpi_gsi_to_irq+0x24/0x40
[<ffffffff8120aa37>] ? acpi_os_install_interrupt_handler+0x36/0xbd
[<ffffffff8169468b>] ? acpi_init+0x0/0x27f
[<ffffffff8121b89e>] ? acpi_ev_install_xrupt_handlers+0x1a/0x79
[<ffffffff8169468b>] ? acpi_init+0x0/0x27f
[<ffffffff8169470b>] ? acpi_init+0x80/0x27f
[<ffffffff8169468b>] ? acpi_init+0x0/0x27f
[<ffffffff81076dd5>] ? ktime_get+0x1c/0x66
[<ffffffff8169468b>] ? acpi_init+0x0/0x27f
[<ffffffff8100a092>] ? do_one_initcall+0x64/0x17c
[<ffffffff816677a8>] ? kernel_init+0x14f/0x1be
[<ffffffff81014fea>] ? child_rip+0xa/0x20
[<ffffffff810141a7>] ? int_ret_from_sys_call+0x7/0x1b
[<ffffffff8101495d>] ? retint_restore_args+0x5/0x6
[<ffffffff81014fe0>] ? child_rip+0x0/0x20
[-- Attachment #4: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
next prev parent reply other threads:[~2010-07-13 18:22 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <AANLkTim33Hbar2x0ey8R3hyQ97esu_C6ll7GuYQIb8i_@mail.gmail.com>
2010-07-02 15:19 ` Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot ktckd
2010-07-06 14:15 ` Konrad Rzeszutek Wilk
2010-07-07 16:59 ` ktckd
2010-07-13 15:06 ` Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot - global_irq != irq for INT_SRC_OVR Konrad Rzeszutek Wilk
2010-07-13 18:22 ` ktckd [this message]
2010-07-13 20:06 ` Fwd: Xen4.0/FC8/Linux-2.6.31.13 hang on boot Konrad Rzeszutek Wilk
2010-07-14 20:47 ` ktckd
2010-07-15 13:31 ` Konrad Rzeszutek Wilk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AANLkTimPMNqtSmPdG20AL2Rsp106LstJkns3KkT0w91L@mail.gmail.com \
--to=ktckd9@gmail.com \
--cc=konrad.wilk@oracle.com \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).