xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Shriram Rajagopalan <rshriram@cs.ubc.ca>
To: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: linux-pm@lists.linux-foundation.org, xen-devel@lists.xensource.com
Subject: Re: [linux-pm] [PATCH v3 4/5] PM: Add visible HIBERNATION_INTERFACE and hide HIBERNATION
Date: Fri, 25 Mar 2011 15:41:09 -0700	[thread overview]
Message-ID: <AANLkTinVNXHiVD9_MBHCJ2sSHPQV_UKpAH=2WeeOzmHX@mail.gmail.com> (raw)
In-Reply-To: <201103252335.43131.rjw@sisk.pl>


[-- Attachment #1.1: Type: text/plain, Size: 8214 bytes --]

2011/3/25 Rafael J. Wysocki <rjw@sisk.pl>

> On Friday, March 25, 2011, Shriram Rajagopalan wrote:
> > On Sat, Mar 19, 2011 at 6:25 PM, Shriram Rajagopalan <rshriram@cs.ubc.ca
> >wrote:
> >
> > > On Fri, Mar 18, 2011 at 2:36 PM, Rafael J. Wysocki <rjw@sisk.pl>
> wrote:
> > >
> > >> On Wednesday, March 16, 2011, Rafael J. Wysocki wrote:
> > >> > On Tuesday, March 15, 2011, Shriram Rajagopalan wrote:
> > >> > > 2011/3/15 Rafael J. Wysocki <rjw@sisk.pl>:
> > >> ...
> > >> >
> > >> > Basically, I can do the patch for you, but that'll take some time.
> > >> > Stay tuned. :-)
> > >>
> > >> The patch below appears to work for me, please check if it works
> > >> for you when you put the Xen patch selecting HIBERNATION on top
> > >> of it.
> > >>
> > >> Thanks,
> > >> Rafael
> > >>
> > >> ---
> > >>  arch/x86/power/Makefile |    3 ++-
> > >>  include/linux/suspend.h |   15 +++++----------
> > >>  kernel/power/Kconfig    |    4 ++++
> > >>  kernel/power/Makefile   |    4 ++--
> > >>  kernel/power/main.c     |    2 +-
> > >>  kernel/power/power.h    |    6 +++---
> > >>  6 files changed, 17 insertions(+), 17 deletions(-)
> > >>
> > >> Index: linux-2.6/kernel/power/Kconfig
> > >> ===================================================================
> > >> --- linux-2.6.orig/kernel/power/Kconfig
> > >> +++ linux-2.6/kernel/power/Kconfig
> > >> @@ -19,8 +19,12 @@ config SUSPEND_FREEZER
> > >>           Turning OFF this setting is NOT recommended! If in doubt,
> say Y.
> > >>
> > >>  config HIBERNATION
> > >> +       bool
> > >> +
> > >> +config HIBERNATE_INTERFACE
> > >>         bool "Hibernation (aka 'suspend to disk')"
> > >>         depends on SWAP && ARCH_HIBERNATION_POSSIBLE
> > >> +       select HIBERNATION
> > >>         select LZO_COMPRESS
> > >>        select LZO_DECOMPRESS
> > >>         ---help---
> > >> Index: linux-2.6/kernel/power/Makefile
> > >> ===================================================================
> > >> --- linux-2.6.orig/kernel/power/Makefile
> > >> +++ linux-2.6/kernel/power/Makefile
> > >> @@ -5,7 +5,7 @@ obj-$(CONFIG_PM_SLEEP)          += console.o
> > >>  obj-$(CONFIG_FREEZER)          += process.o
> > >>  obj-$(CONFIG_SUSPEND)          += suspend.o
> > >>  obj-$(CONFIG_PM_TEST_SUSPEND)  += suspend_test.o
> > >> -obj-$(CONFIG_HIBERNATION)      += hibernate.o snapshot.o swap.o
> user.o \
> > >> -                                  block_io.o
> > >> +obj-$(CONFIG_HIBERNATE_INTERFACE)      += hibernate.o snapshot.o
> swap.o \
> > >> +                                               user.o block_io.o
> > >>
> > >>  obj-$(CONFIG_MAGIC_SYSRQ)      += poweroff.o
> > >> Index: linux-2.6/include/linux/suspend.h
> > >> ===================================================================
> > >> --- linux-2.6.orig/include/linux/suspend.h
> > >> +++ linux-2.6/include/linux/suspend.h
> > >> @@ -229,7 +229,7 @@ struct platform_hibernation_ops {
> > >>        void (*recover)(void);
> > >>  };
> > >>
> > >> -#ifdef CONFIG_HIBERNATION
> > >> +#ifdef CONFIG_HIBERNATE_INTERFACE
> > >>  /* kernel/power/snapshot.c */
> > >>  extern void __register_nosave_region(unsigned long b, unsigned long
> e,
> > >> int km);
> > >>  static inline void __init register_nosave_region(unsigned long b,
> > >> unsigned long e)
> > >> @@ -248,7 +248,9 @@ extern unsigned long get_safe_page(gfp_t
> > >>  extern void hibernation_set_ops(const struct platform_hibernation_ops
> > >> *ops);
> > >>  extern int hibernate(void);
> > >>  extern bool system_entering_hibernation(void);
> > >> -#else /* CONFIG_HIBERNATION */
> > >> +#else /* !CONFIG_HIBERNATE_INTERFACE */
> > >> +static inline void register_nosave_region(unsigned long b, unsigned
> long
> > >> e) {}
> > >> +static inline void register_nosave_region_late(unsigned long b,
> unsigned
> > >> long e) {}
> > >>  static inline int swsusp_page_is_forbidden(struct page *p) { return
> 0; }
> > >>  static inline void swsusp_set_page_free(struct page *p) {}
> > >>  static inline void swsusp_unset_page_free(struct page *p) {}
> > >> @@ -256,7 +258,7 @@ static inline void swsusp_unset_page_fre
> > >>  static inline void hibernation_set_ops(const struct
> > >> platform_hibernation_ops *ops) {}
> > >>  static inline int hibernate(void) { return -ENOSYS; }
> > >>  static inline bool system_entering_hibernation(void) { return false;
> }
> > >> -#endif /* CONFIG_HIBERNATION */
> > >> +#endif /* !CONFIG_HIBERNATE_INTERFACE */
> > >>
> > >>  #ifdef CONFIG_PM_SLEEP
> > >>  void save_processor_state(void);
> > >> @@ -298,13 +300,6 @@ static inline bool pm_wakeup_pending(voi
> > >>  extern struct mutex pm_mutex;
> > >>
> > >>  #ifndef CONFIG_HIBERNATION
> > >> -static inline void register_nosave_region(unsigned long b, unsigned
> long
> > >> e)
> > >> -{
> > >> -}
> > >> -static inline void register_nosave_region_late(unsigned long b,
> unsigned
> > >> long e)
> > >> -{
> > >> -}
> > >> -
> > >>  static inline void lock_system_sleep(void) {}
> > >>  static inline void unlock_system_sleep(void) {}
> > >>
> > >> Index: linux-2.6/arch/x86/power/Makefile
> > >> ===================================================================
> > >> --- linux-2.6.orig/arch/x86/power/Makefile
> > >> +++ linux-2.6/arch/x86/power/Makefile
> > >> @@ -4,4 +4,5 @@ nostackp := $(call cc-option, -fno-stack
> > >>  CFLAGS_cpu.o   := $(nostackp)
> > >>
> > >>  obj-$(CONFIG_PM_SLEEP)         += cpu.o
> > >> -obj-$(CONFIG_HIBERNATION)      += hibernate_$(BITS).o
> > >> hibernate_asm_$(BITS).o
> > >> +obj-$(CONFIG_HIBERNATE_INTERFACE)      += hibernate_$(BITS).o \
> > >> +
> hibernate_asm_$(BITS).o
> > >> Index: linux-2.6/kernel/power/main.c
> > >> ===================================================================
> > >> --- linux-2.6.orig/kernel/power/main.c
> > >> +++ linux-2.6/kernel/power/main.c
> > >> @@ -156,7 +156,7 @@ static ssize_t state_show(struct kobject
> > >>                         s += sprintf(s,"%s ", pm_states[i]);
> > >>        }
> > >>  #endif
> > >> -#ifdef CONFIG_HIBERNATION
> > >> +#ifdef CONFIG_HIBERNATE_INTERFACE
> > >>         s += sprintf(s, "%s\n", "disk");
> > >>  #else
> > >>        if (s != buf)
> > >> Index: linux-2.6/kernel/power/power.h
> > >> ===================================================================
> > >> --- linux-2.6.orig/kernel/power/power.h
> > >> +++ linux-2.6/kernel/power/power.h
> > >> @@ -13,7 +13,7 @@ struct swsusp_info {
> > >>        unsigned long           size;
> > >>  } __attribute__((aligned(PAGE_SIZE)));
> > >>
> > >> -#ifdef CONFIG_HIBERNATION
> > >> +#ifdef CONFIG_HIBERNATE_INTERFACE
> > >>  /* kernel/power/snapshot.c */
> > >>  extern void __init hibernate_image_size_init(void);
> > >>
> > >> @@ -53,10 +53,10 @@ extern int hibernation_snapshot(int plat
> > >>  extern int hibernation_restore(int platform_mode);
> > >>  extern int hibernation_platform_enter(void);
> > >>
> > >> -#else /* !CONFIG_HIBERNATION */
> > >> +#else /* !CONFIG_HIBERNATE_INTERFACE */
> > >>
> > >>  static inline void hibernate_image_size_init(void) {}
> > >> -#endif /* !CONFIG_HIBERNATION */
> > >> +#endif /* !CONFIG_HIBERNATE_INTERFACE */
> > >>
> > >>  extern int pfn_is_nosave(unsigned long);
> > >>
> > >>
> > >> The code compiles perfectly. However, I am not able to test it
> > > in my installation (cant seem to boot a PV kernel - nothing to do
> > > with your patch).
> > > Will respond once I get the boot issue sorted.
> > >
> > > shriram
> > >
> > Hi,
> > sorry for the delay. I finally managed to get my system back in
> > one piece.
> >
> > So the patch you sent works perfectly. I tested xen save/restore with
> > both HIBERNATE_INTERFACE enabled and disabled. When disabled,
> > I dont see sys/power/disk.. (as expected).
>
> Cool. :-)
>
> > so how do you want to go about these two patches? I am ok with you
> > pushing "4/5 Add visible HIBERNATE_INTERFACE..." under your own
> > authorship (as you did the refactoring anyway :) ). That way, you would
> > just have to take "5/5 fix XEN_SAVE_RESTORE Kconfig dependencies".
>
> I will push my patch to Linus, but quite likely after -rc1, since I've just
> prepared a pull request I'm going to send later today.
>
> I'll add your Tested-by to the patch if you don't mind.
>
> Thanks,
> Rafael
>
> yep. sure

[-- Attachment #1.2: Type: text/html, Size: 10961 bytes --]

[-- Attachment #2: Type: text/plain, Size: 138 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

      reply	other threads:[~2011-03-25 22:41 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-12  5:07 [PATCH v3 4/5] PM: Add visible HIBERNATION_INTERFACE and hide HIBERNATION Shriram Rajagopalan
2011-03-15 21:25 ` Shriram Rajagopalan
2011-03-15 21:39   ` Rafael J. Wysocki
2011-03-15 21:38 ` Rafael J. Wysocki
2011-03-15 22:16   ` Shriram Rajagopalan
2011-03-16  0:53     ` Rafael J. Wysocki
2011-03-18 21:36       ` [linux-pm] " Rafael J. Wysocki
2011-03-20  1:25         ` Shriram Rajagopalan
2011-03-25  7:23           ` Shriram Rajagopalan
2011-03-25 22:35             ` Rafael J. Wysocki
2011-03-25 22:41               ` Shriram Rajagopalan [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='AANLkTinVNXHiVD9_MBHCJ2sSHPQV_UKpAH=2WeeOzmHX@mail.gmail.com' \
    --to=rshriram@cs.ubc.ca \
    --cc=linux-pm@lists.linux-foundation.org \
    --cc=rjw@sisk.pl \
    --cc=xen-devel@lists.xensource.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).