From: Keith Swett <swettk@gmail.com>
To: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xensource.com
Subject: Re: Trying to track down odd behavior, errors in xen dmesg
Date: Fri, 8 Apr 2011 08:40:10 -0500 [thread overview]
Message-ID: <BANLkTi==g14Na0XCBAC0zqOZ_xFU16YSCQ@mail.gmail.com> (raw)
In-Reply-To: <BANLkTim_Khsw=KCvHFqg1mzwQGtayQLRpQ@mail.gmail.com>
Another update:
Retested using Xen 4.0.1-2 (i386 install)
and Dom0 Kernel 2.6.32-5-xen-686
with the same kernel for the domU. The same strange behavior still
shows up when using iSCSI backing.
--Keith
On Thu, Apr 7, 2011 at 11:39 AM, Keith Swett <swettk@gmail.com> wrote:
> Here's a summary:
>
> All installs are Debian Squeeze
>
> These stay the same for all tests:
> Host is Xen 4.0.1-2 (AMD64 install)
> Dom0 Kernel is 2.6.32-5-xen-amd64
>
> Test procedure:
> Install Debian Distro via PXE boot using HVM.
> If successful, install xen version of kernel, reboot in non-HVM mode.
>
> DomUs:
>
> with iSCSI:
> debian pxe netboot installer i386 in HVM mode WORKS (disk detects as
> Qemu hard drive)
> FAIL after installing a xen kernel (linux-image-xen-686_2.6.32+29) and
> switching to builder=linux
>
> debian pxe netboot installer AMD64 in HVM mode FAIL (disk detects as
> Xen Virtual Hard drive)
>
> with AOE:
> debian pxe netboot installer AMD64 in HVM mode FAIL (disk detects as
> Xen Virtual Hard drive)
>
> with LVM:
> debian pxe netboot installer i386 in HVM mode WORKS (disk detects as
> Qemu hard drive)
> WORKS after installing a xen kernel (linux-image-xen-686_2.6.32+29)
> and switching to builder=linux
>
> debian pxe netboot installer AMD64 in HVM mode WORKS (disk detects as
> Xen Virtual hard drive)
> WORKS after installing a xen kernel
> (linux-image-2.6-xen-amd64_2.6.32+29) and switching to builder=linux
>
> the tests for physical drives are identical to the LVM tests.
>
> In all FAIL cases, similar messages appear in xm dmesg.
>
> --Keith
>
>
>
> On Thu, Apr 7, 2011 at 11:23 AM, Konrad Rzeszutek Wilk
> <konrad.wilk@oracle.com> wrote:
>> On Thu, Apr 07, 2011 at 11:02:55AM -0500, Keith Swett wrote:
>>> Local disk, partition, and LVM all work correctly.
>>
>> And you mentioned that at the end and I completly missed it. Ooops.
>> Sorry about that.
>>
>> You mentioned Xen 4.0.1... so when did this work? What kernel/hypervisor
>> did not exhibit this problem?
>>
>>
>>>
>>> --Keith
>>>
>>> On Thu, Apr 7, 2011 at 11:01 AM, Konrad Rzeszutek Wilk
>>> <konrad.wilk@oracle.com> wrote:
>>> > On Thu, Apr 07, 2011 at 10:52:37AM -0500, Keith Swett wrote:
>>> >> A bit more info to add, I just tested with AOE (ata over ethernet)
>>> >> instead of iSCSI and I see the same issue.
>>> >
>>> > Sure, but does it occur if you devices that are not using the network.
>>> > Like a local disk?
>>> >
>>> >>
>>> >> --Keith
>>> >>
>>> >> On Thu, Apr 7, 2011 at 8:54 AM, Konrad Rzeszutek Wilk
>>> >> <konrad.wilk@oracle.com> wrote:
>>> >> > On Wed, Apr 06, 2011 at 11:30:02AM -0500, Keith Swett wrote:
>>> >> >> Hi,
>>> >> >>
>>> >> >> I'm having a strange issue with Xen 4.0.1 AMD64 (debian squeeze).
>>> >> >> I am importing a iSCSI lun into dom0 from a storage array (using
>>> >> >> open-iscsi), this is used as the disk [phy:] for my domU.
>>> >> >
>>> >> >> If I use HVM, the install works correctly. As soon as I switch to pv
>>> >> >> for the disk drivers (after installing a xen kernel in the domU) I get
>>> >> >> a slew of messages in xm dmesg:
>>> >> > This problem does not occur if the phy is pointing to a local disk?
>>> >> >>
>>> >> >> (XEN) grant-table.c:1956:d0 Could not get src frame 3f3149
>>> >> >> (XEN) printk: 1851 messages suppressed.
>>> >> >> (XEN) grant-table.c:1956:d0 Could not get src frame 3f3728
>>> >> >> (XEN) printk: 1354 messages suppressed.
>>> >> >> (XEN) grant-table.c:1956:d0 Could not get src frame 3f3485
>>> >> >> (XEN) printk: 1890 messages suppressed.
>>> >> >> (XEN) grant-table.c:1956:d0 Could not get src frame 3f3e58
>>> >> >> (XEN) printk: 2153 messages suppressed.
>>> >> >> (XEN) grant-table.c:1956:d0 Could not get src frame 3f3c9c
>>> >> >> (XEN) printk: 1912 messages suppressed.
>>> >> >> (XEN) grant-table.c:1956:d0 Could not get src frame 3f4287
>>> >> >> (XEN) printk: 2287 messages suppressed.
>>> >> >> (XEN) grant-table.c:1956:d0 Could not get src frame 3f40dc
>>> >> >> Disk speed is very slow as well. Running DD in the domU to write a
>>> >> >> file to disk causes more error messages to appear. It also badly
>>> >> >> corrupts the disk in some cases.
>>> >> >> Testing from a local LVM works without error in all cases.
>>> >> >>
>>> >> >> Any suggestions?
>>> >> >> --Keith
>>> >> >>
>>> >> >> _______________________________________________
>>> >> >> Xen-devel mailing list
>>> >> >> Xen-devel@lists.xensource.com
>>> >> >> http://lists.xensource.com/xen-devel
>>> >> >
>>> >>
>>> >> _______________________________________________
>>> >> Xen-devel mailing list
>>> >> Xen-devel@lists.xensource.com
>>> >> http://lists.xensource.com/xen-devel
>>> >
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>
>
next prev parent reply other threads:[~2011-04-08 13:40 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-06 16:30 Trying to track down odd behavior, errors in xen dmesg Keith Swett
2011-04-07 13:54 ` Konrad Rzeszutek Wilk
2011-04-07 14:45 ` Keith Swett
2011-04-07 15:52 ` Keith Swett
2011-04-07 16:01 ` Konrad Rzeszutek Wilk
2011-04-07 16:02 ` Keith Swett
2011-04-07 16:23 ` Konrad Rzeszutek Wilk
2011-04-07 16:39 ` Keith Swett
2011-04-08 13:40 ` Keith Swett [this message]
2011-04-08 13:53 ` Konrad Rzeszutek Wilk
2011-04-08 13:59 ` Keith Swett
2011-04-12 10:20 ` Konrad Rzeszutek Wilk
2011-04-12 16:20 ` Keith Swett
2011-04-12 20:41 ` Konrad Rzeszutek Wilk
2011-04-12 20:59 ` Keith Swett
2011-04-12 21:08 ` Konrad Rzeszutek Wilk
2011-04-12 21:23 ` Keith Swett
2011-04-12 22:48 ` Konrad Rzeszutek Wilk
2011-04-12 23:02 ` Keith Swett
2011-04-13 13:05 ` Konrad Rzeszutek Wilk
2011-04-14 13:24 ` Konrad Rzeszutek Wilk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='BANLkTi==g14Na0XCBAC0zqOZ_xFU16YSCQ@mail.gmail.com' \
--to=swettk@gmail.com \
--cc=konrad.wilk@oracle.com \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).