xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
* GSoC Introduction: Add Xen PV block device support to SeaBIOS
@ 2011-05-06 10:25 Daniel Castro
  2011-05-06 10:36 ` [Xen-devel] " Ian Campbell
  0 siblings, 1 reply; 2+ messages in thread
From: Daniel Castro @ 2011-05-06 10:25 UTC (permalink / raw)
  To: xen-devel

Good Day to all,

My Name is Daniel Castro I am going to be your google coder for this summer in:

Add Xen PV block device support to SeaBIOS

About Me:
This is my first time in Google Summer of Code and my first time
contributing to an open source project. I hope I will keep
contributing for many years to come to Xen Hypervisor. I was born and
raised in Colombia and currently a PhD candidate in South Korea. I
worked with Citrix XenServer for several years, but never worked with
the open source version, and I have big expectations for Xen.

The Project:
Currently Xen is using for HVM Virtual machines a version of BIOS
called  ROMBIOS. Xen is going to introduce SeaBIOS (and upstream
qemu), which happens to also be the qemu upstream and KVM BIOS of
Choice. Then a modification to SeaBIOS hard drive abstract layer will
be done to use the PV Drivers instead of the emulated device used in
qemu-dm.
Once SeaBIOS is in place my work starts as follows:
We are going to provide PV frontend drivers for SeaBIOS in order to
discourage the use of the emulated device. Removing the emulated
device also removes the subtle confusion that can arise from booting
from one device (emulated) but (apparently) running from another (PV
frontend).  Around July we will present the community with a patch(s)
that will enable to test this new functionality. Test for each kind of
VM  (Windows HVM VMs) will be done and a compatibility matrix will be
presented as part of the usual documentation.
All activities and reports will be posted on:
http://wiki.xensource.com/xenwiki/SeaBIOS

All questions or/and suggestions are very welcome,
Thank you,
Daniel

-- 
+-=====---------------------------+
| +---------------------------------+ | This space intentionally blank
for notetaking.
| |   | Daniel Castro,                |
| |   | Consultant/Programmer.|
| |   | U Andes                         |
+-------------------------------------+

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [Xen-devel] GSoC Introduction: Add Xen PV block device support to SeaBIOS
  2011-05-06 10:25 GSoC Introduction: Add Xen PV block device support to SeaBIOS Daniel Castro
@ 2011-05-06 10:36 ` Ian Campbell
  0 siblings, 0 replies; 2+ messages in thread
From: Ian Campbell @ 2011-05-06 10:36 UTC (permalink / raw)
  To: Daniel Castro
  Cc: xen-devel@lists.xensource.com, seabios, qemu-devel@nongnu.org


On Fri, 2011-05-06 at 11:25 +0100, Daniel Castro wrote:
> Good Day to all,
> 
> My Name is Daniel Castro I am going to be your google coder for this summer in:
> 
> Add Xen PV block device support to SeaBIOS

Thanks Daniel and Welcome!

I'll be mentoring Daniel in this project.

(I've taken the liberty of CCing the SeaBIOS and qemu lists for their
information).

Cheers,
Ian.

> 
> About Me:
> This is my first time in Google Summer of Code and my first time
> contributing to an open source project. I hope I will keep
> contributing for many years to come to Xen Hypervisor. I was born and
> raised in Colombia and currently a PhD candidate in South Korea. I
> worked with Citrix XenServer for several years, but never worked with
> the open source version, and I have big expectations for Xen.
> 
> The Project:
> Currently Xen is using for HVM Virtual machines a version of BIOS
> called  ROMBIOS. Xen is going to introduce SeaBIOS (and upstream
> qemu), which happens to also be the qemu upstream and KVM BIOS of
> Choice. Then a modification to SeaBIOS hard drive abstract layer will
> be done to use the PV Drivers instead of the emulated device used in
> qemu-dm.
> Once SeaBIOS is in place my work starts as follows:
> We are going to provide PV frontend drivers for SeaBIOS in order to
> discourage the use of the emulated device. Removing the emulated
> device also removes the subtle confusion that can arise from booting
> from one device (emulated) but (apparently) running from another (PV
> frontend).  Around July we will present the community with a patch(s)
> that will enable to test this new functionality. Test for each kind of
> VM  (Windows HVM VMs) will be done and a compatibility matrix will be
> presented as part of the usual documentation.
> All activities and reports will be posted on:
> http://wiki.xensource.com/xenwiki/SeaBIOS
> 
> All questions or/and suggestions are very welcome,
> Thank you,
> Daniel
> 

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2011-05-06 10:36 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-05-06 10:25 GSoC Introduction: Add Xen PV block device support to SeaBIOS Daniel Castro
2011-05-06 10:36 ` [Xen-devel] " Ian Campbell

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).