* pvops Domain 0 Creased when boot Xen-unstable on Ubuntu10.04
@ 2011-05-16 17:42 Bei Guan
2011-05-16 17:53 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 14+ messages in thread
From: Bei Guan @ 2011-05-16 17:42 UTC (permalink / raw)
To: Xen Devel; +Cc: Andrei Warkentin
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1.1: Type: text/plain; charset=GB2312, Size: 8993 bytes --]
Hi All,
I try to install Xen-4.2-unstable with pvops dom0 kernel(2.6.32.28) on
Ubuntu10.04. But the kernel panic when I reboot. The message got with the
serial debugging is as the following. And the config file of dom0 kernel is
also attached. Can anyone give me some advice?
And what's the problem with my installation?
Many thanks,
Bei Guan
__ __ _ _ ____ _ _ _
\ \/ /___ _ __ | || | |___ \ _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ | || |_ __) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | |__ _| / __/|__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |_|(_)_____| \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 4.2-unstable (root@) (gcc version 4.4.3 (Ubuntu
4.4.3-4ubuntu5) ) Mon May 16 18:47:25 HKT 2011
(XEN) Latest ChangeSet: Thu May 12 16:42:54 2011 +0100 23339:f9bb0bbea7c2
(XEN) Bootloader: GRUB 1.98-1ubuntu12
(XEN) Command line: dummy=dummy dom0_mem=2048M com1=115200,8n1 console=com1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009dc00 (usable)
(XEN) 000000000009dc00 - 00000000000a0000 (reserved)
(XEN) 00000000000d2000 - 00000000000d4000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bfeb0000 (usable)
(XEN) 00000000bfeb0000 - 00000000bfecb000 (ACPI data)
(XEN) 00000000bfecb000 - 00000000bfece000 (ACPI NVS)
(XEN) 00000000bfece000 - 00000000c0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec10000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000134000000 (usable)
(XEN) ACPI: RSDP 000F61B0, 0014 (r0 PTLTD )
(XEN) ACPI: RSDT BFEC103B, 0048 (r1 LENOVO TC-2J 37 LTP 0)
(XEN) ACPI: FACP BFECAE2B, 0074 (r1 LENOVO TC-2J 37 PTL 1)
(XEN) ACPI: DSDT BFEC42E4, 6B47 (r1 LENOVO TC-2J 37 MSFT 100000E)
(XEN) ACPI: FACS BFECDFC0, 0040
(XEN) ACPI: TCPA BFECAE9F, 0032 (r2 LENOVO TC-2J 37 PTL 0)
(XEN) ACPI: ASF! BFECAED1, 0063 (r16 CETP 2JETP 37 PTL 1)
(XEN) ACPI: MCFG BFECAF34, 003C (r1 PTLTD M2JG 37 LTP 0)
(XEN) ACPI: APIC BFECAF70, 0068 (r1 PTLTD A2JC 37 LTP 0)
(XEN) ACPI: BOOT BFECAFD8, 0028 (r1 PTLTD $SB2JBL$ 37 LTP 1)
(XEN) ACPI: SSDT BFEC252E, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050228)
(XEN) ACPI: SSDT BFEC2488, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050228)
(XEN) ACPI: SSDT BFEC1083, 1405 (r1 PmRef CpuPm 3000 INTL 20050228)
(XEN) System RAM: 3902MB (3995956kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000134000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f6300
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x1008
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[fe10,0], pm1x_evt[1000,0]
(XEN) ACPI: wakeup_vec[bfecdfcc], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 6:15 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 9
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) Table is not found!
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) IRQ limits: 24 GSI, 376 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 1862.063 MHz processor.
(XEN) Initing memory sharing.
(XEN) mce_intel.c:1206: MCA Capability: BCAST 1 SER 0 CMCI 0 firstbank 1
extended MCE MSR 0
(XEN) CPU0: Thermal monitoring handled by SMI
(XEN) Intel machine check reporting enabled
(XEN) I/O virtualisation disabled
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 3.579MHz ACPI PM Timer
ÿ(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC TPR shadow
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs disabled.
(XEN) HVM: VMX enabled
(XEN) Brought up 2 CPUs
(XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'.
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x87c000
(XEN) elf_parse_binary: phdr: paddr=0x187c000 memsz=0xcc498
(XEN) elf_parse_binary: phdr: paddr=0x1949000 memsz=0x888
(XEN) elf_parse_binary: phdr: paddr=0x194a000 memsz=0x159d8
(XEN) elf_parse_binary: phdr: paddr=0x1960000 memsz=0x28b000
(XEN) elf_parse_binary: memory: 0x1000000 -> 0x1beb000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff81960200
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
(XEN) elf_xen_parse_note: FEATURES =
"!writable_page_tables|pae_pgdir_above_4gb"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xffffffff80000000
(XEN) elf_paddr_offset = 0x0
(XEN) virt_offset = 0xffffffff80000000
(XEN) virt_kstart = 0xffffffff81000000
(XEN) virt_kend = 0xffffffff81beb000
(XEN) virt_entry = 0xffffffff81960200
(XEN) p2m_base = 0xffffffffffffffff
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1beb000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000128000000->000000012c000000 (505970 pages to be
allocated)
(XEN) Init. ramdisk: 0000000133872000->0000000134000000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81beb000
(XEN) Init. ramdisk: ffffffff81beb000->ffffffff82379000
(XEN) Phys-Mach map: ffffffff82379000->ffffffff82779000
(XEN) Start info: ffffffff82779000->ffffffff827794b4
(XEN) Page tables: ffffffff8277a000->ffffffff82793000
(XEN) Boot stack: ffffffff82793000->ffffffff82794000
(XEN) TOTAL: ffffffff80000000->ffffffff82c00000
(XEN) ENTRY ADDRESS: ffffffff81960200
(XEN) Dom0 has maximum 2 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff8187c000
(XEN) elf_load_binary: phdr 1 at 0xffffffff8187c000 -> 0xffffffff81948498
(XEN) elf_load_binary: phdr 2 at 0xffffffff81949000 -> 0xffffffff81949888
(XEN) elf_load_binary: phdr 3 at 0xffffffff8194a000 -> 0xffffffff8195f9d8
(XEN) elf_load_binary: phdr 4 at 0xffffffff81960000 -> 0xffffffff819eb000
(XEN) Scrubbing Free RAM: ..................done.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen)
(XEN) Freed 232kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1a.1
(XEN) PCI add device 00:1a.7
(XEN) PCI add device 00:1b.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.4
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) PCI add device 00:1d.2
(XEN) PCI add device 00:1d.7
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 00:1f.5
(XEN) PCI add device 01:00.0
(XEN) PCI add device 03:00.0
(XEN) Domain 0 crashed: rebooting machine in 5 seconds.
[-- Attachment #1.2: Type: text/html, Size: 12439 bytes --]
[-- Attachment #2: config --]
[-- Type: application/octet-stream, Size: 68994 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.32.28
# Tue May 17 00:12:40 2011
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_EVENT_PROFILE=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_SPARSE_IRQ=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=128
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DEBUG_FS=y
CONFIG_SWIOTLB_XEN=y
CONFIG_MICROCODE_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_DOM0_PCI=y
CONFIG_XEN_PCI_PASSTHROUGH=y
CONFIG_KVM_CLOCK=y
# CONFIG_KVM_GUEST is not set
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_PARAVIRT_DEBUG=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
# CONFIG_X86_MCE_INJECT is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_POWER_METER is not set
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_HOTPLUG_MEMORY is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_XEN_PCIDEV_FRONTEND=y
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_SCH_PLUG is not set
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEFAULT_PS_VALUE=1
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
CONFIG_SYS_HYPERVISOR=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
CONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_XEN_BLKDEV_FRONTEND=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_BNX2=y
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set
CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH_COMMON is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
# CONFIG_HERMES is not set
# CONFIG_WL12XX is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_PCMCIA_IBMTR is not set
# CONFIG_WAN is not set
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
CONFIG_XEN_KBDDEV_FRONTEND=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_WINBOND_CIR is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
CONFIG_XEN_WDT=y
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=y
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XEN_BACKEND=y
CONFIG_XEN_NETDEV_BACKEND=y
CONFIG_XEN_BLKDEV_BACKEND=y
CONFIG_XEN_BLKDEV_TAP=y
CONFIG_XEN_BLKBACK_PAGEMAP=y
CONFIG_XEN_PCIDEV_BACKEND=y
CONFIG_XEN_PCIDEV_BACKEND_VPCI=y
# CONFIG_XEN_PCIDEV_BACKEND_PASS is not set
# CONFIG_XEN_PCIDEV_BACKEND_SLOT is not set
# CONFIG_XEN_PCIDEV_BACKEND_CONTROLLER is not set
# CONFIG_XEN_PCIDEV_BE_DEBUG is not set
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
CONFIG_XEN_S3=y
CONFIG_ACPI_PROCESSOR_XEN=y
CONFIG_XEN_PLATFORM_PCI=y
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
CONFIG_KVM_AMD=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: pvops Domain 0 Creased when boot Xen-unstable on Ubuntu10.04
2011-05-16 17:42 pvops Domain 0 Creased when boot Xen-unstable on Ubuntu10.04 Bei Guan
@ 2011-05-16 17:53 ` Konrad Rzeszutek Wilk
2011-05-17 14:39 ` Bei Guan
0 siblings, 1 reply; 14+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-05-16 17:53 UTC (permalink / raw)
To: Bei Guan; +Cc: Xen Devel, Andrei Warkentin
On Tue, May 17, 2011 at 01:42:15AM +0800, Bei Guan wrote:
> Hi All,
>
> I try to install Xen-4.2-unstable with pvops dom0 kernel(2.6.32.28) on
So from Jeremy's git tree?
> Ubuntu10.04. But the kernel panic when I reboot. The message got with the
> serial debugging is as the following. And the config file of dom0 kernel is
Take a look at the PVOPS wiki and follow the troubleshooting section. It will
explain to you how to ratchet up the debug/logging of Dom0.
> also attached. Can anyone give me some advice?
> And what's the problem with my installation?
No idea without more Linux kernel data.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: pvops Domain 0 Creased when boot Xen-unstable on Ubuntu10.04
2011-05-16 17:53 ` Konrad Rzeszutek Wilk
@ 2011-05-17 14:39 ` Bei Guan
2011-05-17 14:44 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 14+ messages in thread
From: Bei Guan @ 2011-05-17 14:39 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: Xen Devel, Andrei Warkentin
[-- Attachment #1.1: Type: text/plain, Size: 1969 bytes --]
Hi,
I did the following steps for PVOps dom 0 kernel (2.6.32.28) on Ubuntu10.04
x64. And debug of Dom0 is attached.
git clone git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.gitlinux-2.6-xen
make menuconfig
make bzImage
make modules
make modules_install
cp -a .config /boot/config-2.6.32.28
cp -a System.map /boot/System.map-2.6.32.28
cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.28
update-initramfs -c -k 2.6.32.28
update-grub
My xen entry in grub.cfg is as the following.
menuentry "Ubuntu_Xen 4.2 (2.6.32.28)" {
recordfail
insmod ext2
set root='(hd0,9)'
search --no-floppy --fs-uuid --set 59c64afa-47a8-4a5f-a4cf-dbe3be20cc15
multiboot /boot/xen.gz dom0_mem=1024M loglvl=all guest_loglvl=all
sync_console console_to_ring com1=115200,8n1 console=com1 lapic=debug
apic_verbosity=debug apic=debug iommu=off
module /boot/vmlinuz-2.6.32.28 nopat
root=UUID=59c64afa-47a8-4a5f-a4cf-dbe3be20cc15 ro console=tty0
console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug
debug loglevel=10
module /boot/initrd.img-2.6.32.28
}
In the debug, there is message like this:
Loading, please wait...
mount: mounting none on /dev failed: No such device
So, is there any error in the grub entry? What other log can I provide?
Thanks,
Bei Guan
2011/5/17 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> On Tue, May 17, 2011 at 01:42:15AM +0800, Bei Guan wrote:
> > Hi All,
> >
> > I try to install Xen-4.2-unstable with pvops dom0 kernel(2.6.32.28) on
>
> So from Jeremy's git tree?
> Ubuntu10.04. But the kernel panic when I reboot. The message got with the
> > serial debugging is as the following. And the config file of dom0 kernel
> is
>
> Take a look at the PVOPS wiki and follow the troubleshooting section. It
> will
> explain to you how to ratchet up the debug/logging of Dom0.
> > also attached. Can anyone give me some advice?
> > And what's the problem with my installation?
>
> No idea without more Linux kernel data.
>
[-- Attachment #1.2: Type: text/html, Size: 3652 bytes --]
[-- Attachment #2: boot_debug.txt --]
[-- Type: text/plain, Size: 172180 bytes --]
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.05.17 20:33:28 =~=~=~=~=~=~=~=~=~=~=~=
__ __ _ _ ____ _ _ _
\ \/ /___ _ __ | || | |___ \ _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ | || |_ __) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | |__ _| / __/|__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |_|(_)_____| \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 4.2-unstable (root@) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) Tue May 17 18:59:04 HKT 2011
(XEN) Latest ChangeSet: Thu May 12 16:42:54 2011 +0100 23339:f9bb0bbea7c2
(XEN) Console output is synchronous.
(XEN) Bootloader: GRUB 1.98-1ubuntu12
(XEN) Command line: dom0_mem=1024M loglvl=all guest_loglvl=all sync_console console_to_ring com1=115200,8n1 console=com1 lapic=debug apic_verbosity=debug apic=debug iommu=off
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009dc00 (usable)
(XEN) 000000000009dc00 - 00000000000a0000 (reserved)
(XEN) 00000000000d2000 - 00000000000d4000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bfeb0000 (usable)
(XEN) 00000000bfeb0000 - 00000000bfecb000 (ACPI data)
(XEN) 00000000bfecb000 - 00000000bfece000 (ACPI NVS)
(XEN) 00000000bfece000 - 00000000c0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec10000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000134000000 (usable)
(XEN) ACPI: RSDP 000F61B0, 0014 (r0 PTLTD )
(XEN) ACPI: RSDT BFEC103B, 0048 (r1 LENOVO TC-2J 37 LTP 0)
(XEN) ACPI: FACP BFECAE2B, 0074 (r1 LENOVO TC-2J 37 PTL 1)
(XEN) ACPI: DSDT BFEC42E4, 6B47 (r1 LENOVO TC-2J 37 MSFT 100000E)
(XEN) ACPI: FACS BFECDFC0, 0040
(XEN) ACPI: TCPA BFECAE9F, 0032 (r2 LENOVO TC-2J 37 PTL 0)
(XEN) ACPI: ASF! BFECAED1, 0063 (r16 CETP 2JETP 37 PTL 1)
(XEN) ACPI: MCFG BFECAF34, 003C (r1 PTLTD M2JG 37 LTP 0)
(XEN) ACPI: APIC BFECAF70, 0068 (r1 PTLTD A2JC 37 LTP 0)
(XEN) ACPI: BOOT BFECAFD8, 0028 (r1 PTLTD $SB2JBL$ 37 LTP 1)
(XEN) ACPI: SSDT BFEC252E, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050228)
(XEN) ACPI: SSDT BFEC2488, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050228)
(XEN) ACPI: SSDT BFEC1083, 1405 (r1 PmRef CpuPm 3000 INTL 20050228)
(XEN) System RAM: 3902MB (3995956kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000134000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f6300
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x1008
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[fe10,0], pm1x_evt[1000,0]
(XEN) ACPI: wakeup_vec[bfecdfcc], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 6:15 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 9
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) Table is not found!
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) mapped APIC to ffff82c3ffefe000 (fee00000)
(XEN) mapped IOAPIC to ffff82c3ffefd000 (fec00000)
(XEN) IRQ limits: 24 GSI, 376 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 1862.059 MHz processor.
(XEN) Initing memory sharing.
(XEN) mce_intel.c:1206: MCA Capability: BCAST 1 SER 0 CMCI 0 firstbank 1 extended MCE MSR 0
(XEN) CPU0: Thermal monitoring handled by SMI
(XEN) Intel machine check reporting enabled
(XEN) I/O virtualisation disabled
(XEN) Getting VERSION: 50014
(XEN) Getting VERSION: 50014
(XEN) Getting ID: 0
(XEN) Getting LVT0: 700
(XEN) Getting LVT1: 400
(XEN) enabled ExtINT on CPU#0
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) number of MP IRQ sources: 15.
(XEN) number of IO-APIC #2 registers: 24.
(XEN) testing the IO APIC.......................
(XEN) IO APIC #2......
(XEN) .... register #00: 02000000
(XEN) ....... : physical APIC id: 02
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00170020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 0
(XEN) ....... : IO APIC version: 0020
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 001 01 0 0 0 0 0 1 1 28
(XEN) 02 001 01 0 0 0 0 0 1 1 F0
(XEN) 03 001 01 0 0 0 0 0 1 1 30
(XEN) 04 001 01 0 0 0 0 0 1 1 F1
(XEN) 05 001 01 0 0 0 0 0 1 1 38
(XEN) 06 001 01 0 0 0 0 0 1 1 40
(XEN) 07 001 01 0 0 0 0 0 1 1 48
(XEN) 08 001 01 0 0 0 0 0 1 1 50
(XEN) 09 001 01 1 1 0 0 0 1 1 58
(XEN) 0a 001 01 0 0 0 0 0 1 1 60
(XEN) 0b 001 01 0 0 0 0 0 1 1 68
(XEN) 0c 001 01 0 0 0 0 0 1 1 70
(XEN) 0d 001 01 0 0 0 0 0 1 1 78
(XEN) 0e 001 01 0 0 0 0 0 1 1 88
(XEN) 0f 001 01 0 0 0 0 0 1 1 90
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) Using vector-based indexing
(XEN) IRQ to pin mappings:
(XEN) IRQ240 -> 0:2
(XEN) IRQ40 -> 0:1
(XEN) IRQ48 -> 0:3
(XEN) IRQ241 -> 0:4
(XEN) IRQ56 -> 0:5
(XEN) IRQ64 -> 0:6
(XEN) IRQ72 -> 0:7
(XEN) IRQ80 -> 0:8
(XEN) IRQ88 -> 0:9
(XEN) IRQ96 -> 0:10
(XEN) IRQ104 -> 0:11
(XEN) IRQ112 -> 0:12
(XEN) IRQ120 -> 0:13
(XEN) IRQ136 -> 0:14
(XEN) IRQ144 -> 0:15
(XEN) .................................... done.
(XEN) Using local APIC timer interrupts.
(XEN) calibrating APIC timer ...
(XEN) ..... CPU clock speed is 1862.0250 MHz.
(XEN) ..... host bus clock speed is 266.0034 MHz.
(XEN) ..... bus_scale = 0x00011069
(XEN) Platform timer is 3.579MHz ACPI PM Timer
я(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC TPR shadow
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs disabled.
(XEN) HVM: VMX enabled
(XEN) masked ExtINT on CPU#1
(XEN) Brought up 2 CPUs
(XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'.
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x87c000
(XEN) elf_parse_binary: phdr: paddr=0x187c000 memsz=0xcc498
(XEN) elf_parse_binary: phdr: paddr=0x1949000 memsz=0x888
(XEN) elf_parse_binary: phdr: paddr=0x194a000 memsz=0x159d8
(XEN) elf_parse_binary: phdr: paddr=0x1960000 memsz=0x28b000
(XEN) elf_parse_binary: memory: 0x1000000 -> 0x1beb000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff81960200
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
(XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xffffffff80000000
(XEN) elf_paddr_offset = 0x0
(XEN) virt_offset = 0xffffffff80000000
(XEN) virt_kstart = 0xffffffff81000000
(XEN) virt_kend = 0xffffffff81beb000
(XEN) virt_entry = 0xffffffff81960200
(XEN) p2m_base = 0xffffffffffffffff
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1beb000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000128000000->000000012c000000 (243826 pages to be allocated)
(XEN) Init. ramdisk: 0000000133872000->0000000134000000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81beb000
(XEN) Init. ramdisk: ffffffff81beb000->ffffffff82379000
(XEN) Phys-Mach map: ffffffff82379000->ffffffff82579000
(XEN) Start info: ffffffff82579000->ffffffff825794b4
(XEN) Page tables: ffffffff8257a000->ffffffff82591000
(XEN) Boot stack: ffffffff82591000->ffffffff82592000
(XEN) TOTAL: ffffffff80000000->ffffffff82800000
(XEN) ENTRY ADDRESS: ffffffff81960200
(XEN) Dom0 has maximum 2 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff8187c000
(XEN) elf_load_binary: phdr 1 at 0xffffffff8187c000 -> 0xffffffff81948498
(XEN) elf_load_binary: phdr 2 at 0xffffffff81949000 -> 0xffffffff81949888
(XEN) elf_load_binary: phdr 3 at 0xffffffff8194a000 -> 0xffffffff8195f9d8
(XEN) elf_load_binary: phdr 4 at 0xffffffff81960000 -> 0xffffffff819eb000
(XEN) Scrubbing Free RAM: ............................done.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 232kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.28 (root@gavinguan-desktop) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Tue May 17 19:27:52 HKT 2011
[ 0.000000] Command line: nopat root=UUID=59c64afa-47a8-4a5f-a4cf-dbe3be20cc15 ro console=tty0 console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] Xen: 000000000009dc00 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] Xen: 00000000bfeb0000 - 00000000bfecb000 (ACPI data)
[ 0.000000] Xen: 00000000bfecb000 - 00000000bfece000 (ACPI NVS)
[ 0.000000] Xen: 00000000bfece000 - 00000000c0000000 (reserved)
[ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 00000001b3eb0000 (usable)
[ 0.000000] PAT support disabled.
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x1b3eb0 max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009d000 (usable)
[ 0.000000] modified: 000000000009dc00 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] modified: 00000000bfeb0000 - 00000000bfecb000 (ACPI data)
[ 0.000000] modified: 00000000bfecb000 - 00000000bfece000 (ACPI NVS)
[ 0.000000] modified: 00000000bfece000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 00000001b3eb0000 (usable)
[ 0.000000] initial memory mapped : 0 - 02fff000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000
[ 0.000000] 0000000000 - 0040000000 page 4k
[ 0.000000] kernel direct mapping tables up to 40000000 @ 100000-302000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001b3eb0000
[ 0.000000] 0100000000 - 01b3eb0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1b3eb0000 @ 2591000-3339000
[ 0.000000] RAMDISK: 01beb000 - 02379000
[ 0.000000] ACPI: RSDP 00000000000f61b0 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 00000000bfec103b 00048 (v01 LENOVO TC-2J 00000037 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bfecae2b 00074 (v01 LENOVO TC-2J 00000037 PTL 00000001)
[ 0.000000] ACPI: DSDT 00000000bfec42e4 06B47 (v01 LENOVO TC-2J 00000037 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000bfecdfc0 00040
[ 0.000000] ACPI: TCPA 00000000bfecae9f 00032 (v02 LENOVO TC-2J 00000037 PTL 00000000)
[ 0.000000] ACPI: ASF! 00000000bfecaed1 00063 (v16 CETP 2JETP 00000037 PTL 00000001)
[ 0.000000] ACPI: MCFG 00000000bfecaf34 0003C (v01 PTLTD M2JG 00000037 LTP 00000000)
[ 0.000000] ACPI: APIC 00000000bfecaf70 00068 (v01 PTLTD ? A2JC 00000037 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfecafd8 00028 (v01 PTLTD $SB2JBL$ 00000037 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfec252e 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000bfec2488 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000bfec1083 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 01b3eb0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [000257a000 - 0002591000] XEN PAGETABLES ==> [000257a000 - 0002591000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001ac0054] TEXT DATA BSS ==> [0001000000 - 0001ac0054]
[ 0.000000] #4 [0001beb000 - 0002379000] RAMDISK ==> [0001beb000 - 0002379000]
[ 0.000000] #5 [0002379000 - 000257a000] XEN START INFO ==> [0002379000 - 000257a000]
[ 0.000000] #6 [0100000000 - 01b3eb0000] XEN EXTRA ==> [0100000000 - 01b3eb0000]
[ 0.000000] #7 [0001ac1000 - 0001acd100] BRK ==> [0001ac1000 - 0001acd100]
[ 0.000000] #8 [0000100000 - 00002e8000] PGTABLE ==> [0000100000 - 00002e8000]
[ 0.000000] #9 [0002591000 - 0002b34000] PGTABLE ==> [0002591000 - 0002b34000]
[ 0.000000] found SMP MP-table at [ffff8800000f6300] f6300
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001b3eb0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00040000
[ 0.000000] 0: 0x00100000 -> 0x001b3eb0
[ 0.000000] On node 0 totalpages: 998984
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 491 pages reserved
[ 0.000000] DMA zone: 3445 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 243768 pages, LIFO batch:31
[ 0.000000] Normal zone: 10076 pages used for memmap
[ 0.000000] Normal zone: 726868 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 256
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 00000000bfeb0000
[ 0.000000] PM: Registered nosave memory: 00000000bfeb0000 - 00000000bfecb000
[ 0.000000] PM: Registered nosave memory: 00000000bfecb000 - 00000000bfece000
[ 0.000000] PM: Registered nosave memory: 00000000bfece000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:7feb0000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.2-unstable (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88002804f000 s88536 r8192 d22056 u118784
[ 0.000000] pcpu-alloc: s88536 r8192 d22056 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 974081
[ 0.000000] Kernel command line: nopat root=UUID=59c64afa-47a8-4a5f-a4cf-dbe3be20cc15 ro console=tty0 console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] DMA: software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ffff880024060000 size=32768
[ 0.000000] Memory: 890524k/7142080k available (5805k kernel code, 3146144k absent, 3104708k reserved, 3700k data, 596k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:768
[ 0.000000] xen: --> irq=0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen: --> irq=2
[ 0.000000] xen: --> irq=3
[ 0.000000] xen: --> irq=4
[ 0.000000] xen: --> irq=5
[ 0.000000] xen: --> irq=6
[ 0.000000] xen: --> irq=7
[ 0.000000] xen: --> irq=8
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: --> irq=10
[ 0.000000] xen: --> irq=11
[ 0.000000] xen: --> irq=12
[ 0.000000] xen: --> irq=13
[ 0.000000] xen: --> irq=14
[ 0.000000] xen: --> irq=15
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 0
[ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[ 0.000000] xen: --> irq=9
(XEN) IOAPIC[0]: Set PCI routing entry (2-9 -> 0x58 -> IRQ 9 Mode:1 Active:0)
[ 0.000000] xen: acpi sci 9
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.28 (root@gavinguan-desktop) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Tue May 17 19:27:52 HKT 2011
[ 0.000000] Command line: nopat root=UUID=59c64afa-47a8-4a5f-a4cf-dbe3be20cc15 ro console=tty0 console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] Xen: 000000000009dc00 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] Xen: 00000000bfeb0000 - 00000000bfecb000 (ACPI data)
[ 0.000000] Xen: 00000000bfecb000 - 00000000bfece000 (ACPI NVS)
[ 0.000000] Xen: 00000000bfece000 - 00000000c0000000 (reserved)
[ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 00000001b3eb0000 (usable)
[ 0.000000] PAT support disabled.
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x1b3eb0 max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009d000 (usable)
[ 0.000000] modified: 000000000009dc00 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] modified: 00000000bfeb0000 - 00000000bfecb000 (ACPI data)
[ 0.000000] modified: 00000000bfecb000 - 00000000bfece000 (ACPI NVS)
[ 0.000000] modified: 00000000bfece000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 00000001b3eb0000 (usable)
[ 0.000000] initial memory mapped : 0 - 02fff000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000
[ 0.000000] 0000000000 - 0040000000 page 4k
[ 0.000000] kernel direct mapping tables up to 40000000 @ 100000-302000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001b3eb0000
[ 0.000000] 0100000000 - 01b3eb0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1b3eb0000 @ 2591000-3339000
[ 0.000000] RAMDISK: 01beb000 - 02379000
[ 0.000000] ACPI: RSDP 00000000000f61b0 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 00000000bfec103b 00048 (v01 LENOVO TC-2J 00000037 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bfecae2b 00074 (v01 LENOVO TC-2J 00000037 PTL 00000001)
[ 0.000000] ACPI: DSDT 00000000bfec42e4 06B47 (v01 LENOVO TC-2J 00000037 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000bfecdfc0 00040
[ 0.000000] ACPI: TCPA 00000000bfecae9f 00032 (v02 LENOVO TC-2J 00000037 PTL 00000000)
[ 0.000000] ACPI: ASF! 00000000bfecaed1 00063 (v16 CETP 2JETP 00000037 PTL 00000001)
[ 0.000000] ACPI: MCFG 00000000bfecaf34 0003C (v01 PTLTD M2JG 00000037 LTP 00000000)
[ 0.000000] ACPI: APIC 00000000bfecaf70 00068 (v01 PTLTD ? A2JC 00000037 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfecafd8 00028 (v01 PTLTD $SB2JBL$ 00000037 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfec252e 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000bfec2488 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000bfec1083 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 01b3eb0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [000257a000 - 0002591000] XEN PAGETABLES ==> [000257a000 - 0002591000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001ac0054] TEXT DATA BSS ==> [0001000000 - 0001ac0054]
[ 0.000000] #4 [0001beb000 - 0002379000] RAMDISK ==> [0001beb000 - 0002379000]
[ 0.000000] #5 [0002379000 - 000257a000] XEN START INFO ==> [0002379000 - 000257a000]
[ 0.000000] #6 [0100000000 - 01b3eb0000] XEN EXTRA ==> [0100000000 - 01b3eb0000]
[ 0.000000] #7 [0001ac1000 - 0001acd100] BRK ==> [0001ac1000 - 0001acd100]
[ 0.000000] #8 [0000100000 - 00002e8000] PGTABLE ==> [0000100000 - 00002e8000]
[ 0.000000] #9 [0002591000 - 0002b34000] PGTABLE ==> [0002591000 - 0002b34000]
[ 0.000000] found SMP MP-table at [ffff8800000f6300] f6300
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001b3eb0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00040000
[ 0.000000] 0: 0x00100000 -> 0x001b3eb0
[ 0.000000] On node 0 totalpages: 998984
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 491 pages reserved
[ 0.000000] DMA zone: 3445 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 243768 pages, LIFO batch:31
[ 0.000000] Normal zone: 10076 pages used for memmap
[ 0.000000] Normal zone: 726868 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 256
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 00000000bfeb0000
[ 0.000000] PM: Registered nosave memory: 00000000bfeb0000 - 00000000bfecb000
[ 0.000000] PM: Registered nosave memory: 00000000bfecb000 - 00000000bfece000
[ 0.000000] PM: Registered nosave memory: 00000000bfece000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:7feb0000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.2-unstable (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88002804f000 s88536 r8192 d22056 u118784
[ 0.000000] pcpu-alloc: s88536 r8192 d22056 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 974081
[ 0.000000] Kernel command line: nopat root=UUID=59c64afa-47a8-4a5f-a4cf-dbe3be20cc15 ro console=tty0 console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] DMA: software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ffff880024060000 size=32768
[ 0.000000] Memory: 890524k/7142080k available (5805k kernel code, 3146144k absent, 3104708k reserved, 3700k data, 596k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:768
[ 0.000000] xen: --> irq=0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen: --> irq=2
[ 0.000000] xen: --> irq=3
[ 0.000000] xen: --> irq=4
[ 0.000000] xen: --> irq=5
[ 0.000000] xen: --> irq=6
[ 0.000000] xen: --> irq=7
[ 0.000000] xen: --> irq=8
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: --> irq=10
[ 0.000000] xen: --> irq=11
[ 0.000000] xen: --> irq=12
[ 0.000000] xen: --> irq=13
[ 0.000000] xen: --> irq=14
[ 0.000000] xen: --> irq=15
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 0
[ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: acpi sci 9
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.28 (root@gavinguan-desktop) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Tue May 17 19:27:52 HKT 2011
[ 0.000000] Command line: nopat root=UUID=59c64afa-47a8-4a5f-a4cf-dbe3be20cc15 ro console=tty0 console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] Xen: 000000000009dc00 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] Xen: 00000000bfeb0000 - 00000000bfecb000 (ACPI data)
[ 0.000000] Xen: 00000000bfecb000 - 00000000bfece000 (ACPI NVS)
[ 0.000000] Xen: 00000000bfece000 - 00000000c0000000 (reserved)
[ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 00000001b3eb0000 (usable)
[ 0.000000] PAT support disabled.
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x1b3eb0 max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009d000 (usable)
[ 0.000000] modified: 000000000009dc00 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] modified: 00000000bfeb0000 - 00000000bfecb000 (ACPI data)
[ 0.000000] modified: 00000000bfecb000 - 00000000bfece000 (ACPI NVS)
[ 0.000000] modified: 00000000bfece000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 00000001b3eb0000 (usable)
[ 0.000000] initial memory mapped : 0 - 02fff000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000
[ 0.000000] 0000000000 - 0040000000 page 4k
[ 0.000000] kernel direct mapping tables up to 40000000 @ 100000-302000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001b3eb0000
[ 0.000000] 0100000000 - 01b3eb0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1b3eb0000 @ 2591000-3339000
[ 0.000000] RAMDISK: 01beb000 - 02379000
[ 0.000000] ACPI: RSDP 00000000000f61b0 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 00000000bfec103b 00048 (v01 LENOVO TC-2J 00000037 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bfecae2b 00074 (v01 LENOVO TC-2J 00000037 PTL 00000001)
[ 0.000000] ACPI: DSDT 00000000bfec42e4 06B47 (v01 LENOVO TC-2J 00000037 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000bfecdfc0 00040
[ 0.000000] ACPI: TCPA 00000000bfecae9f 00032 (v02 LENOVO TC-2J 00000037 PTL 00000000)
[ 0.000000] ACPI: ASF! 00000000bfecaed1 00063 (v16 CETP 2JETP 00000037 PTL 00000001)
[ 0.000000] ACPI: MCFG 00000000bfecaf34 0003C (v01 PTLTD M2JG 00000037 LTP 00000000)
[ 0.000000] ACPI: APIC 00000000bfecaf70 00068 (v01 PTLTD ? A2JC 00000037 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfecafd8 00028 (v01 PTLTD $SB2JBL$ 00000037 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfec252e 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000bfec2488 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000bfec1083 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 01b3eb0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [000257a000 - 0002591000] XEN PAGETABLES ==> [000257a000 - 0002591000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001ac0054] TEXT DATA BSS ==> [0001000000 - 0001ac0054]
[ 0.000000] #4 [0001beb000 - 0002379000] RAMDISK ==> [0001beb000 - 0002379000]
[ 0.000000] #5 [0002379000 - 000257a000] XEN START INFO ==> [0002379000 - 000257a000]
[ 0.000000] #6 [0100000000 - 01b3eb0000] XEN EXTRA ==> [0100000000 - 01b3eb0000]
[ 0.000000] #7 [0001ac1000 - 0001acd100] BRK ==> [0001ac1000 - 0001acd100]
[ 0.000000] #8 [0000100000 - 00002e8000] PGTABLE ==> [0000100000 - 00002e8000]
[ 0.000000] #9 [0002591000 - 0002b34000] PGTABLE ==> [0002591000 - 0002b34000]
[ 0.000000] found SMP MP-table at [ffff8800000f6300] f6300
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001b3eb0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00040000
[ 0.000000] 0: 0x00100000 -> 0x001b3eb0
[ 0.000000] On node 0 totalpages: 998984
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 491 pages reserved
[ 0.000000] DMA zone: 3445 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 243768 pages, LIFO batch:31
[ 0.000000] Normal zone: 10076 pages used for memmap
[ 0.000000] Normal zone: 726868 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 256
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 00000000bfeb0000
[ 0.000000] PM: Registered nosave memory: 00000000bfeb0000 - 00000000bfecb000
[ 0.000000] PM: Registered nosave memory: 00000000bfecb000 - 00000000bfece000
[ 0.000000] PM: Registered nosave memory: 00000000bfece000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:7feb0000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.2-unstable (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88002804f000 s88536 r8192 d22056 u118784
[ 0.000000] pcpu-alloc: s88536 r8192 d22056 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 974081
[ 0.000000] Kernel command line: nopat root=UUID=59c64afa-47a8-4a5f-a4cf-dbe3be20cc15 ro console=tty0 console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] DMA: software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ffff880024060000 size=32768
[ 0.000000] Memory: 890524k/7142080k available (5805k kernel code, 3146144k absent, 3104708k reserved, 3700k data, 596k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:768
[ 0.000000] xen: --> irq=0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen: --> irq=2
[ 0.000000] xen: --> irq=3
[ 0.000000] xen: --> irq=4
[ 0.000000] xen: --> irq=5
[ 0.000000] xen: --> irq=6
[ 0.000000] xen: --> irq=7
[ 0.000000] xen: --> irq=8
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: --> irq=10
[ 0.000000] xen: --> irq=11
[ 0.000000] xen: --> irq=12
[ 0.000000] xen: --> irq=13
[ 0.000000] xen: --> irq=14
[ 0.000000] xen: --> irq=15
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 0
[ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: acpi sci 9
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] alloc irq_desc for 767 on node -1
[ 0.000000] alloc kstat_irqs on node -1
[ 0.000000] Detected 1862.059 MHz processor.
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.11 BogoMIPS (lpj=1862059)
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Initializing.
[ 0.000999] SELinux: Starting in permissive mode
[ 0.000999] Mount-cache hash table entries: 256
[ 0.001338] Initializing cgroup subsys ns
[ 0.001999] Initializing cgroup subsys cpuacct
[ 0.001999] Initializing cgroup subsys freezer
[ 0.002038] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.002999] CPU: L2 cache: 2048K
[ 0.003010] CPU: Physical Processor ID: 0
[ 0.003999] CPU: Processor Core ID: 0
[ 0.004009] mce: CPU supports 6 MCE banks
[ 0.005025] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only.
[ 0.005999] SMP alternatives: switching to UP code
[ 0.005999] ACPI: Core revision 20090903
[ 0.020274] alloc irq_desc for 766 on node -1
[ 0.020996] alloc kstat_irqs on node -1
[ 0.021009] cpu 0 spinlock event irq 766
[ 0.021996] alloc irq_desc for 765 on node -1
[ 0.021996] alloc kstat_irqs on node -1
[ 0.022007] alloc irq_desc for 764 on node -1
[ 0.022996] alloc kstat_irqs on node -1
[ 0.023007] alloc irq_desc for 763 on node -1
[ 0.023996] alloc kstat_irqs on node -1
[ 0.024009] alloc irq_desc for 762 on node -1
[ 0.024996] alloc kstat_irqs on node -1
[ 0.025025] calling migration_init+0x0/0x59 @ 1
[ 0.026060] initcall migration_init+0x0/0x59 returned 0 after 976 usecs
[ 0.026995] calling spawn_ksoftirqd+0x0/0x59 @ 1
[ 0.027042] initcall spawn_ksoftirqd+0x0/0x59 returned 0 after 976 usecs
[ 0.027995] calling init_call_single_data+0x0/0x89 @ 1
[ 0.027995] initcall init_call_single_data+0x0/0x89 returned 0 after 0 usecs
[ 0.027995] calling relay_init+0x0/0x14 @ 1
[ 0.027995] initcall relay_init+0x0/0x14 returned 0 after 0 usecs
[ 0.027995] calling tracer_alloc_buffers+0x0/0x173 @ 1
[ 0.027995] initcall tracer_alloc_buffers+0x0/0x173 returned 0 after 0 usecs
[ 0.027995] calling init_trace_printk+0x0/0x12 @ 1
[ 0.027995] initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs
[ 0.027995] calling mce_amd_init+0x0/0x33 @ 1
[ 0.027995] initcall mce_amd_init+0x0/0x33 returned 0 after 0 usecs
[ 0.028096] installing Xen timer for CPU 1
[ 0.028995] alloc irq_desc for 761 on node -1
[ 0.028995] alloc kstat_irqs on node -1
[ 0.029009] alloc irq_desc for 760 on node -1
[ 0.029995] alloc kstat_irqs on node -1
[ 0.030006] cpu 1 spinlock event irq 760
[ 0.031027] SMP alternatives: switching to SMP code
[ 0.031995] alloc irq_desc for 759 on node -1
[ 0.031995] alloc kstat_irqs on node -1
[ 0.032009] alloc irq_desc for 758 on node -1
[ 0.032994] alloc kstat_irqs on node -1
[ 0.033007] alloc irq_desc for 757 on node -1
[ 0.033994] alloc kstat_irqs on node -1
[ 0.034007] alloc irq_desc for 756 on node -1
[ 0.034994] alloc kstat_irqs on node -1
[ 0.000999] Initializing CPU#1
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 2048K
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.035146] Brought up 2 CPUs
[ 0.043792] calling init_mmap_min_addr+0x0/0x26 @ 1
[ 0.043993] initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs
[ 0.043993] calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
[ 0.043993] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
[ 0.043993] calling net_ns_init+0x0/0xed @ 1
[ 0.044036] initcall net_ns_init+0x0/0xed returned 0 after 976 usecs
[ 0.044993] calling e820_mark_nvs_memory+0x0/0x40 @ 1
[ 0.044993] initcall e820_mark_nvs_memory+0x0/0x40 returned 0 after 0 usecs
[ 0.044993] calling cpufreq_tsc+0x0/0x28 @ 1
[ 0.044993] initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs
[ 0.044993] calling pci_reboot_init+0x0/0x14 @ 1
[ 0.044993] initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs
[ 0.044993] calling init_lapic_sysfs+0x0/0x2d @ 1
[ 0.045355] initcall init_lapic_sysfs+0x0/0x2d returned 0 after 976 usecs
[ 0.045993] calling alloc_frozen_cpus+0x0/0x8 @ 1
[ 0.045993] initcall alloc_frozen_cpus+0x0/0x8 returned 0 after 0 usecs
[ 0.045993] calling sysctl_init+0x0/0x32 @ 1
[ 0.045993] initcall sysctl_init+0x0/0x32 returned 0 after 0 usecs
[ 0.045993] calling ksysfs_init+0x0/0xc0 @ 1
[ 0.045993] initcall ksysfs_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.045993] calling async_init+0x0/0x60 @ 1
[ 0.046033] initcall async_init+0x0/0x60 returned 0 after 976 usecs
[ 0.046992] calling init_jiffies_clocksource+0x0/0x12 @ 1
[ 0.046992] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs
[ 0.046992] calling pm_init+0x0/0x34 @ 1
[ 0.046992] initcall pm_init+0x0/0x34 returned 0 after 0 usecs
[ 0.046992] calling pm_disk_init+0x0/0x19 @ 1
[ 0.046992] initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs
[ 0.046992] calling swsusp_header_init+0x0/0x2c @ 1
[ 0.046992] initcall swsusp_header_init+0x0/0x2c returned 0 after 0 usecs
[ 0.046992] calling init_zero_pfn+0x0/0x68 @ 1
[ 0.046992] initcall init_zero_pfn+0x0/0x68 returned 0 after 0 usecs
[ 0.046992] calling filelock_init+0x0/0x2e @ 1
[ 0.046992] initcall filelock_init+0x0/0x2e returned 0 after 0 usecs
[ 0.046992] calling init_misc_binfmt+0x0/0x44 @ 1
[ 0.046992] initcall init_misc_binfmt+0x0/0x44 returned 0 after 0 usecs
[ 0.046992] calling init_script_binfmt+0x0/0x14 @ 1
[ 0.046992] initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs
[ 0.046992] calling init_elf_binfmt+0x0/0x14 @ 1
[ 0.046992] initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
[ 0.046992] calling init_compat_elf_binfmt+0x0/0x14 @ 1
[ 0.046992] initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
[ 0.046992] calling debugfs_init+0x0/0x5c @ 1
[ 0.046992] initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs
[ 0.046992] calling random32_init+0x0/0xd8 @ 1
[ 0.046992] initcall random32_init+0x0/0xd8 returned 0 after 0 usecs
[ 0.046992] calling __gnttab_init+0x0/0x21 @ 1
[ 0.047059] Grant table initialized
[ 0.047992] initcall __gnttab_init+0x0/0x21 returned 0 after 976 usecs
[ 0.047992] calling early_resume_init+0x0/0x19e @ 1
[ 0.047992] Time: 20:34:15 Date: 05/17/11
[ 0.047992] initcall early_resume_init+0x0/0x19e returned 0 after 0 usecs
[ 0.047992] calling cpufreq_core_init+0x0/0x9b @ 1
[ 0.047992] initcall cpufreq_core_init+0x0/0x9b returned 0 after 0 usecs
[ 0.047992] calling cpuidle_init+0x0/0x40 @ 1
[ 0.048012] initcall cpuidle_init+0x0/0x40 returned 0 after 976 usecs
[ 0.048992] calling sock_init+0x0/0x5e @ 1
[ 0.049067] initcall sock_init+0x0/0x5e returned 0 after 976 usecs
[ 0.049992] calling net_inuse_init+0x0/0x26 @ 1
[ 0.049992] initcall net_inuse_init+0x0/0x26 returned 0 after 0 usecs
[ 0.049992] calling netpoll_init+0x0/0x31 @ 1
[ 0.049992] initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs
[ 0.049992] calling netlink_proto_init+0x0/0x143 @ 1
[ 0.049992] NET: Registered protocol family 16
[ 0.050006] initcall netlink_proto_init+0x0/0x143 returned 0 after 976 usecs
[ 0.050992] calling bdi_class_init+0x0/0x41 @ 1
[ 0.051088] initcall bdi_class_init+0x0/0x41 returned 0 after 976 usecs
[ 0.051992] calling kobject_uevent_init+0x0/0x54 @ 1
[ 0.052067] initcall kobject_uevent_init+0x0/0x54 returned 0 after 976 usecs
[ 0.052991] calling pcibus_class_init+0x0/0x19 @ 1
[ 0.053056] initcall pcibus_class_init+0x0/0x19 returned 0 after 976 usecs
[ 0.053991] calling pci_driver_init+0x0/0x12 @ 1
[ 0.054024] initcall pci_driver_init+0x0/0x12 returned 0 after 976 usecs
[ 0.054991] calling backlight_class_init+0x0/0x5d @ 1
[ 0.055055] initcall backlight_class_init+0x0/0x5d returned 0 after 976 usecs
[ 0.055991] calling video_output_class_init+0x0/0x19 @ 1
[ 0.056026] initcall video_output_class_init+0x0/0x19 returned 0 after 976 usecs
[ 0.056991] calling xenbus_init+0x0/0x2b6 @ 1
[ 0.057007] alloc irq_desc for 755 on node -1
[ 0.057991] alloc kstat_irqs on node -1
[ 0.058046] initcall xenbus_init+0x0/0x2b6 returned 0 after 1952 usecs
[ 0.058991] calling tty_class_init+0x0/0x38 @ 1
[ 0.059054] initcall tty_class_init+0x0/0x38 returned 0 after 976 usecs
[ 0.059990] calling vtconsole_class_init+0x0/0xc2 @ 1
[ 0.060102] initcall vtconsole_class_init+0x0/0xc2 returned 0 after 976 usecs
[ 0.060990] calling i2c_init+0x0/0x6a @ 1
[ 0.061081] initcall i2c_init+0x0/0x6a returned 0 after 976 usecs
[ 0.061990] calling amd_postcore_init+0x0/0x77 @ 1
[ 0.061990] initcall amd_postcore_init+0x0/0x77 returned 0 after 0 usecs
[ 0.061990] calling arch_kdebugfs_init+0x0/0x235 @ 1
[ 0.061990] initcall arch_kdebugfs_init+0x0/0x235 returned 0 after 0 usecs
[ 0.061990] calling mtrr_if_init+0x0/0x61 @ 1
[ 0.061990] initcall mtrr_if_init+0x0/0x61 returned 0 after 0 usecs
[ 0.061990] calling ffh_cstate_init+0x0/0x2a @ 1
[ 0.061990] initcall ffh_cstate_init+0x0/0x2a returned 0 after 0 usecs
[ 0.061990] calling acpi_pci_init+0x0/0x57 @ 1
[ 0.061990] ACPI: bus type pci registered
[ 0.061990] initcall acpi_pci_init+0x0/0x57 returned 0 after 0 usecs
[ 0.061990] calling xen_pcpu_init+0x0/0xa8 @ 1
[ 0.062081] sync cpu 0 get result 1 max_id 1
[ 0.063058] sync cpu 1 get result 1 max_id 1
[ 0.063990] alloc irq_desc for 754 on node -1
[ 0.063990] alloc kstat_irqs on node -1
[ 0.064022] initcall xen_pcpu_init+0x0/0xa8 returned 754 after 2929 usecs
[ 0.064990] initcall xen_pcpu_init+0x0/0xa8 returned with error code 754
[ 0.064990] calling register_xen_pci_notifier+0x0/0x24 @ 1
[ 0.064990] initcall register_xen_pci_notifier+0x0/0x24 returned 0 after 0 usecs
[ 0.064990] calling setup_vcpu_hotplug_event+0x0/0x22 @ 1
[ 0.064990] initcall setup_vcpu_hotplug_event+0x0/0x22 returned 0 after 0 usecs
[ 0.064990] calling dmi_id_init+0x0/0x319 @ 1
[ 0.065097] initcall dmi_id_init+0x0/0x319 returned 0 after 976 usecs
[ 0.065989] calling pci_arch_init+0x0/0x60 @ 1
[ 0.066027] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 9
[ 0.066989] PCI: MCFG area at e0000000 reserved in E820
[ 0.068426] PCI: Using MMCONFIG at e0000000 - e09fffff
[ 0.068989] PCI: Using configuration type 1 for base access
[ 0.068989] initcall pci_arch_init+0x0/0x60 returned 0 after 2929 usecs
[ 0.068989] calling topology_init+0x0/0x40 @ 1
[ 0.069081] initcall topology_init+0x0/0x40 returned 0 after 976 usecs
[ 0.069989] calling mtrr_init_finialize+0x0/0x3d @ 1
[ 0.069989] initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs
[ 0.069989] calling param_sysfs_init+0x0/0x224 @ 1
[ 0.098103] initcall param_sysfs_init+0x0/0x224 returned 0 after 28315 usecs
[ 0.098984] calling pm_sysrq_init+0x0/0x19 @ 1
[ 0.098984] initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs
[ 0.098984] calling audit_watch_init+0x0/0x2f @ 1
[ 0.098984] initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs
[ 0.098984] calling default_bdi_init+0x0/0xb2 @ 1
[ 0.099329] initcall default_bdi_init+0x0/0xb2 returned 0 after 976 usecs
[ 0.099984] calling init_bio+0x0/0xda @ 1
[ 0.099984] bio: create slab <bio-0> at 0
[ 0.099984] initcall init_bio+0x0/0xda returned 0 after 0 usecs
[ 0.099984] calling fsnotify_init+0x0/0x12 @ 1
[ 0.099984] initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs
[ 0.099984] calling fsnotify_notification_init+0x0/0xf0 @ 1
[ 0.099984] initcall fsnotify_notification_init+0x0/0xf0 returned 0 after 0 usecs
[ 0.099984] calling cryptomgr_init+0x0/0x12 @ 1
[ 0.099984] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
[ 0.099984] calling blk_settings_init+0x0/0x2a @ 1
[ 0.099984] initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
[ 0.099984] calling blk_ioc_init+0x0/0x2a @ 1
[ 0.099984] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
[ 0.099984] calling blk_softirq_init+0x0/0x6e @ 1
[ 0.099984] initcall blk_softirq_init+0x0/0x6e returned 0 after 0 usecs
[ 0.099984] calling blk_iopoll_setup+0x0/0x6e @ 1
[ 0.099984] initcall blk_iopoll_setup+0x0/0x6e returned 0 after 0 usecs
[ 0.099984] calling genhd_device_init+0x0/0x7b @ 1
[ 0.100094] initcall genhd_device_init+0x0/0x7b returned 0 after 976 usecs
[ 0.100984] calling pci_slot_init+0x0/0x46 @ 1
[ 0.100984] initcall pci_slot_init+0x0/0x46 returned 0 after 0 usecs
[ 0.100984] calling fbmem_init+0x0/0x98 @ 1
[ 0.101011] initcall fbmem_init+0x0/0x98 returned 0 after 976 usecs
[ 0.101984] calling acpi_init+0x0/0x130 @ 1
[ 0.103126] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.103996] ACPI: EC: Look up EC in DSDT
[ 0.111322] ACPI: Interpreter enabled
[ 0.111982] ACPI: (supports S0 S3 S4 S5)
[ 0.111982] ACPI: Using IOAPIC for interrupt routing
[ 0.135040] initcall acpi_init+0x0/0x130 returned 0 after 33198 usecs
[ 0.135979] calling dock_init+0x0/0x8d @ 1
[ 0.135979] ACPI: No dock devices found.
[ 0.135979] initcall dock_init+0x0/0x8d returned 0 after 0 usecs
[ 0.135979] calling acpi_pci_root_init+0x0/0x28 @ 1
[ 0.137360] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
[ 0.137978] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.138479] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.138978] pci 0000:00:01.0: PME# disabled
[ 0.139150] pci 0000:00:1a.0: reg 20 io port: [0x3000-0x301f]
[ 0.139978] pci 0000:00:1a.1: reg 20 io port: [0x3020-0x303f]
[ 0.139978] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd2304000-0xd23043ff]
[ 0.139978] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.139978] pci 0000:00:1a.7: PME# disabled
[ 0.139978] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd2300000-0xd2303fff]
[ 0.139978] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.139978] pci 0000:00:1b.0: PME# disabled
[ 0.139978] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.139978] pci 0000:00:1c.0: PME# disabled
[ 0.139978] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.139978] pci 0000:00:1c.4: PME# disabled
[ 0.139978] pci 0000:00:1d.0: reg 20 io port: [0x3040-0x305f]
[ 0.139978] pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f]
[ 0.139978] pci 0000:00:1d.2: reg 20 io port: [0x3080-0x309f]
[ 0.139978] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd2304400-0xd23047ff]
[ 0.139978] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.139978] pci 0000:00:1d.7: PME# disabled
[ 0.139978] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.139978] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.139978] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
[ 0.139978] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at c800 (mask 00ff)
[ 0.139978] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.139978] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.139978] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.139978] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.139978] pci 0000:00:1f.2: reg 20 io port: [0x30d0-0x30df]
[ 0.139978] pci 0000:00:1f.2: reg 24 io port: [0x30c0-0x30cf]
[ 0.139978] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.139978] pci 0000:00:1f.2: PME# disabled
[ 0.139978] pci 0000:00:1f.3: reg 10 32bit mmio: [0xd2304800-0xd23048ff]
[ 0.139978] pci 0000:00:1f.3: reg 20 io port: [0x30a0-0x30bf]
[ 0.139978] pci 0000:00:1f.5: reg 10 io port: [0x3428-0x342f]
[ 0.139978] pci 0000:00:1f.5: reg 14 io port: [0x341c-0x341f]
[ 0.139978] pci 0000:00:1f.5: reg 18 io port: [0x3420-0x3427]
[ 0.139978] pci 0000:00:1f.5: reg 1c io port: [0x3418-0x341b]
[ 0.139978] pci 0000:00:1f.5: reg 20 io port: [0x30f0-0x30ff]
[ 0.139978] pci 0000:00:1f.5: reg 24 io port: [0x30e0-0x30ef]
[ 0.139978] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.139978] pci 0000:00:1f.5: PME# disabled
[ 0.139978] pci 0000:01:00.0: reg 10 32bit mmio: [0xd1000000-0xd1ffffff]
[ 0.139978] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.139978] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd0ffffff]
[ 0.139978] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.139978] pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd1ffffff]
[ 0.139978] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.139978] pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
[ 0.140145] pci 0000:03:00.0: reg 10 64bit mmio: [0xd2000000-0xd200ffff]
[ 0.140978] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.140978] pci 0000:03:00.0: PME# disabled
[ 0.140978] pci 0000:00:1c.4: bridge 32bit mmio: [0xd2000000-0xd20fffff]
[ 0.140978] pci 0000:00:1e.0: transparent bridge
[ 0.140978] pci_bus 0000:00: on NUMA node 0
[ 0.140978] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.141497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
[ 0.141978] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.141978] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.141978] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.141978] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1a.1
(XEN) PCI add device 00:1a.7
(XEN) PCI add device 00:1b.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.4
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) PCI add device 00:1d.2
(XEN) PCI add device 00:1d.7
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 00:1f.5
(XEN) PCI add device 01:00.0
(XEN) PCI add device 03:00.0
[ 0.171116] initcall acpi_pci_root_init+0x0/0x28 returned 0 after 35150 usecs
[ 0.171973] calling acpi_pci_link_init+0x0/0x43 @ 1
[ 0.171973] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.171973] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.171973] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.171973] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.171973] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.171973] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.171973] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.171973] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.172107] initcall acpi_pci_link_init+0x0/0x43 returned 0 after 976 usecs
[ 0.172973] calling pnp_init+0x0/0x12 @ 1
[ 0.173014] initcall pnp_init+0x0/0x12 returned 0 after 976 usecs
[ 0.173973] calling __setup_shutdown_event+0x0/0x21 @ 1
[ 0.173973] initcall __setup_shutdown_event+0x0/0x21 returned 0 after 0 usecs
[ 0.173973] calling xenbus_probe_backend_init+0x0/0x2d @ 1
[ 0.174017] initcall xenbus_probe_backend_init+0x0/0x2d returned 0 after 976 usecs
[ 0.174973] calling xenbus_probe_frontend_init+0x0/0x2d @ 1
[ 0.175054] initcall xenbus_probe_frontend_init+0x0/0x2d returned 0 after 976 usecs
[ 0.175973] calling balloon_init+0x0/0x268 @ 1
[ 0.175973] xen_balloon: Initialising balloon driver with page order 0.
[ 0.176062] last_pfn = 0x1b3eb0 max_arch_pfn = 0x400000000
[ 0.193436] initcall balloon_init+0x0/0x268 returned 0 after 17575 usecs
[ 0.193970] calling xen_acpi_processor_extcntl_init+0x0/0x4f @ 1
[ 0.193970] initcall xen_acpi_processor_extcntl_init+0x0/0x4f returned 0 after 0 usecs
[ 0.193970] calling misc_init+0x0/0xb7 @ 1
[ 0.194097] initcall misc_init+0x0/0xb7 returned 0 after 976 usecs
[ 0.194970] calling vga_arb_device_init+0x0/0x80 @ 1
[ 0.195061] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.195970] vgaarb: loaded
[ 0.195970] initcall vga_arb_device_init+0x0/0x80 returned 0 after 976 usecs
[ 0.195970] calling cn_init+0x0/0x9e @ 1
[ 0.196002] initcall cn_init+0x0/0x9e returned 0 after 976 usecs
[ 0.196969] calling init_scsi+0x0/0x91 @ 1
[ 0.197117] SCSI subsystem initialized
[ 0.197969] initcall init_scsi+0x0/0x91 returned 0 after 976 usecs
[ 0.197969] calling ata_init+0x0/0x351 @ 1
[ 0.198078] libata version 3.00 loaded.
[ 0.198969] initcall ata_init+0x0/0x351 returned 0 after 976 usecs
[ 0.198969] calling phy_init+0x0/0x2e @ 1
[ 0.199080] initcall phy_init+0x0/0x2e returned 0 after 976 usecs
[ 0.199969] calling init_pcmcia_cs+0x0/0x36 @ 1
[ 0.200033] initcall init_pcmcia_cs+0x0/0x36 returned 0 after 976 usecs
[ 0.200969] calling usb_init+0x0/0x1a9 @ 1
[ 0.201101] usbcore: registered new interface driver usbfs
[ 0.202031] usbcore: registered new interface driver hub
[ 0.203037] usbcore: registered new device driver usb
[ 0.203968] initcall usb_init+0x0/0x1a9 returned 0 after 2929 usecs
[ 0.203968] calling serio_init+0x0/0x86 @ 1
[ 0.204029] initcall serio_init+0x0/0x86 returned 0 after 976 usecs
[ 0.204968] calling input_init+0x0/0x13c @ 1
[ 0.205029] initcall input_init+0x0/0x13c returned 0 after 976 usecs
[ 0.205968] calling rtc_init+0x0/0x71 @ 1
[ 0.206032] initcall rtc_init+0x0/0x71 returned 0 after 976 usecs
[ 0.206968] calling power_supply_class_init+0x0/0x38 @ 1
[ 0.207032] initcall power_supply_class_init+0x0/0x38 returned 0 after 976 usecs
[ 0.207968] calling hwmon_init+0x0/0x106 @ 1
[ 0.207994] initcall hwmon_init+0x0/0x106 returned 0 after 976 usecs
[ 0.208968] calling thermal_init+0x0/0x3f @ 1
[ 0.208994] initcall thermal_init+0x0/0x3f returned 0 after 976 usecs
[ 0.209967] calling md_init+0x0/0xd0 @ 1
[ 0.209967] initcall md_init+0x0/0xd0 returned 0 after 0 usecs
[ 0.209967] calling leds_init+0x0/0x40 @ 1
[ 0.210032] initcall leds_init+0x0/0x40 returned 0 after 976 usecs
[ 0.210967] calling pci_subsys_init+0x0/0x107 @ 1
[ 0.210967] PCI: Using ACPI for IRQ routing
[ 0.210967] pci 0000:00:1c.0: BAR 7: can't allocate resource
[ 0.210967] initcall pci_subsys_init+0x0/0x107 returned 0 after 0 usecs
[ 0.210967] calling proto_init+0x0/0x12 @ 1
[ 0.210967] initcall proto_init+0x0/0x12 returned 0 after 0 usecs
[ 0.210967] calling net_dev_init+0x0/0x175 @ 1
[ 0.211170] initcall net_dev_init+0x0/0x175 returned 0 after 976 usecs
[ 0.211967] calling neigh_init+0x0/0x71 @ 1
[ 0.211967] initcall neigh_init+0x0/0x71 returned 0 after 0 usecs
[ 0.211967] calling fib_rules_init+0x0/0xa6 @ 1
[ 0.211967] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs
[ 0.211967] calling pktsched_init+0x0/0xd0 @ 1
[ 0.211967] initcall pktsched_init+0x0/0xd0 returned 0 after 0 usecs
[ 0.211967] calling tc_filter_init+0x0/0x4c @ 1
[ 0.211967] initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs
[ 0.211967] calling tc_action_init+0x0/0x4c @ 1
[ 0.211967] initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs
[ 0.211967] calling genl_init+0x0/0x8f @ 1
[ 0.211999] initcall genl_init+0x0/0x8f returned 0 after 976 usecs
[ 0.212967] calling cipso_v4_init+0x0/0x61 @ 1
[ 0.212967] initcall cipso_v4_init+0x0/0x61 returned 0 after 0 usecs
[ 0.212967] calling wireless_nlevent_init+0x0/0x12 @ 1
[ 0.212967] initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs
[ 0.212967] calling cfg80211_init+0x0/0x92 @ 1
[ 0.213122] cfg80211: Using static regulatory domain info
[ 0.213967] cfg80211: Regulatory domain: US
[ 0.213967] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.213967] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.213967] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.213967] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.213967] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.213967] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.213967] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.214005] cfg80211: Calling CRDA for country: US
[ 0.215045] initcall cfg80211_init+0x0/0x92 returned 0 after 2929 usecs
[ 0.215967] calling ieee80211_init+0x0/0xb @ 1
[ 0.215967] initcall ieee80211_init+0x0/0xb returned 0 after 0 usecs
[ 0.215967] calling netlbl_init+0x0/0x81 @ 1
[ 0.215967] NetLabel: Initializing
[ 0.215967] NetLabel: domain hash size = 128
[ 0.215967] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.215967] NetLabel: unlabeled traffic allowed by default
[ 0.215967] initcall netlbl_init+0x0/0x81 returned 0 after 0 usecs
[ 0.215967] calling rfkill_init+0x0/0x79 @ 1
[ 0.216034] initcall rfkill_init+0x0/0x79 returned 0 after 976 usecs
[ 0.216966] calling sysctl_init+0x0/0x48 @ 1
[ 0.216966] initcall sysctl_init+0x0/0x48 returned 0 after 0 usecs
[ 0.216966] calling xen_mc_debugfs+0x0/0x118 @ 1
[ 0.216966] initcall xen_mc_debugfs+0x0/0x118 returned 0 after 0 usecs
[ 0.216966] calling xen_mmu_debugfs+0x0/0x2be @ 1
[ 0.217133] initcall xen_mmu_debugfs+0x0/0x2be returned 0 after 976 usecs
[ 0.217966] calling xen_spinlock_debugfs+0x0/0x24e @ 1
[ 0.218063] initcall xen_spinlock_debugfs+0x0/0x24e returned 0 after 976 usecs
[ 0.218966] calling print_all_ICs+0x0/0x51b @ 1
[ 0.218977] initcall print_all_ICs+0x0/0x51b returned 0 after 976 usecs
[ 0.219966] calling hpet_late_init+0x0/0xc5 @ 1
[ 0.219966] initcall hpet_late_init+0x0/0xc5 returned -19 after 0 usecs
[ 0.219966] calling init_k8_nbs+0x0/0x28 @ 1
[ 0.219966] initcall init_k8_nbs+0x0/0x28 returned 0 after 0 usecs
[ 0.219966] calling clocksource_done_booting+0x0/0x5a @ 1
[ 0.219966] Switching to clocksource xen
[ 0.220081] initcall clocksource_done_booting+0x0/0x5a returned 0 after 1068 usecs
[ 0.221021] calling rb_init_debugfs+0x0/0x2f @ 1
[ 0.233279] initcall rb_init_debugfs+0x0/0x2f returned 0 after 53 usecs
[ 0.234229] calling tracer_init_debugfs+0x0/0x2d1 @ 1
[ 0.246054] initcall tracer_init_debugfs+0x0/0x2d1 returned 0 after 349 usecs
[ 0.246776] calling init_trace_printk_function_export+0x0/0x2f @ 1
[ 0.246776] initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 8 usecs
[ 0.246776] calling event_trace_init+0x0/0x1f7 @ 1
[ 0.281020] initcall event_trace_init+0x0/0x1f7 returned 0 after 6811 usecs
[ 0.281304] calling init_pipe_fs+0x0/0x4c @ 1
[ 0.281304] initcall init_pipe_fs+0x0/0x4c returned 0 after 23 usecs
[ 0.281304] calling eventpoll_init+0x0/0xba @ 1
[ 0.281304] initcall eventpoll_init+0x0/0xba returned 0 after 5 usecs
[ 0.281304] calling anon_inode_init+0x0/0x125 @ 1
[ 0.281304] initcall anon_inode_init+0x0/0x125 returned 0 after 16 usecs
[ 0.281304] calling blk_scsi_ioctl_init+0x0/0x289 @ 1
[ 0.281304] initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 0 usecs
[ 0.281304] calling acpi_event_init+0x0/0x81 @ 1
[ 0.341488] initcall acpi_event_init+0x0/0x81 returned 0 after 31 usecs
[ 0.342463] calling pnpacpi_init+0x0/0x8c @ 1
[ 0.342463] pnp: PnP ACPI init
[ 0.356535] ACPI: bus type pnp registered
[ 0.363561] xen: registering gsi 1 triggering 1 polarity 0
[ 0.364305] xen_allocate_pirq: returning irq 1 for gsi 1
[ 0.364305] xen: --> irq=1
(XEN) IOAPIC[0]: Set PCI routing entry (2-1 -> 0x28 -> IRQ 1 Mode:0 Active:0)
[ 0.384933] xen: registering gsi 12 triggering 1 polarity 0
[ 0.385922] xen_allocate_pirq: returning irq 12 for gsi 12
[ 0.385922] xen: --> irq=12
(XEN) IOAPIC[0]: Set PCI routing entry (2-12 -> 0x70 -> IRQ 12 Mode:0 Active:0)
[ 0.407338] xen: registering gsi 13 triggering 1 polarity 0
[ 0.408304] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.408304] xen: --> irq=13
(XEN) IOAPIC[0]: Set PCI routing entry (2-13 -> 0x78 -> IRQ 13 Mode:0 Active:0)
[ 0.429350] xen: registering gsi 8 triggering 1 polarity 0
[ 0.430173] xen_allocate_pirq: returning irq 8 for gsi 8
[ 0.430173] xen: --> irq=8
(XEN) IOAPIC[0]: Set PCI routing entry (2-8 -> 0x50 -> IRQ 8 Mode:0 Active:0)
[ 0.452371] xen: registering gsi 4 triggering 1 polarity 0
[ 0.453305] xen_allocate_pirq: returning irq 4 for gsi 4
[ 0.453305] xen: --> irq=4
[ 0.466769] Already setup the GSI :4
[ 0.471870] xen: registering gsi 6 triggering 1 polarity 0
[ 0.472305] xen_allocate_pirq: returning irq 6 for gsi 6
[ 0.472305] xen: --> irq=6
(XEN) IOAPIC[0]: Set PCI routing entry (2-6 -> 0x40 -> IRQ 6 Mode:0 Active:0)
[ 0.494591] xen: registering gsi 7 triggering 1 polarity 0
[ 0.495305] xen_allocate_pirq: returning irq 7 for gsi 7
[ 0.495305] xen: --> irq=7
(XEN) IOAPIC[0]: Set PCI routing entry (2-7 -> 0x48 -> IRQ 7 Mode:0 Active:0)
[ 0.517359] pnp: PnP ACPI: found 11 devices
[ 0.517814] ACPI: ACPI bus type pnp unregistered
[ 0.517814] initcall pnpacpi_init+0x0/0x8c returned 0 after 169492 usecs
[ 0.517814] calling pnp_system_init+0x0/0x12 @ 1
[ 0.517814] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.517814] system 00:01: ioport range 0x500-0x57f has been reserved
[ 0.517814] system 00:01: ioport range 0x800-0x80f has been reserved
[ 0.517814] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.517814] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 0.517814] system 00:01: ioport range 0xc800-0xc87f has been reserved
[ 0.517814] system 00:01: ioport range 0xc880-0xc8ff has been reserved
[ 0.517814] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 0.517814] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.517814] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.517814] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.517814] system 00:01: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.517814] system 00:01: iomem range 0xfef00000-0xfeffffff has been reserved
[ 0.636632] initcall pnp_system_init+0x0/0x12 returned 0 after 95530 usecs
[ 0.637607] calling pcistub_init+0x0/0x1d7 @ 1
[ 0.649161] initcall pcistub_init+0x0/0x1d7 returned 0 after 457 usecs
[ 0.650118] calling chr_dev_init+0x0/0xc3 @ 1
[ 0.662214] initcall chr_dev_init+0x0/0xc3 returned 0 after 1401 usecs
[ 0.663188] calling firmware_class_init+0x0/0x79 @ 1
[ 0.674574] initcall firmware_class_init+0x0/0x79 returned 0 after 117 usecs
[ 0.675547] calling init_pcmcia_bus+0x0/0x74 @ 1
[ 0.687207] initcall init_pcmcia_bus+0x0/0x74 returned 0 after 214 usecs
[ 0.688154] calling cpufreq_gov_performance_init+0x0/0x12 @ 1
[ 0.688154] initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 1 usecs
[ 0.688154] calling cpufreq_gov_userspace_init+0x0/0x12 @ 1
[ 0.688154] initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 usecs
[ 0.688154] calling init_acpi_pm_clocksource+0x0/0xf6 @ 1
[ 0.735403] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.736303] initcall init_acpi_pm_clocksource+0x0/0xf6 returned -19 after 13534 usecs
[ 0.736303] calling pcibios_assign_resources+0x0/0x74 @ 1
[ 0.736303] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
[ 0.736303] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.736303] pci 0000:00:01.0: IO window: disabled
[ 0.736303] pci 0000:00:01.0: MEM window: 0xd0000000-0xd1ffffff
[ 0.736303] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.736303] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.736303] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.736303] pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff
[ 0.736303] pci 0000:00:1c.0: PREFETCH window: 0x00000040200000-0x000000403fffff
[ 0.736303] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.736303] pci 0000:00:1c.4: IO window: 0x4000-0x4fff
[ 0.736303] pci 0000:00:1c.4: MEM window: 0xd2000000-0xd20fffff
[ 0.736303] pci 0000:00:1c.4: PREFETCH window: 0x00000040400000-0x000000405fffff
[ 0.736303] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 0.736303] pci 0000:00:1e.0: IO window: disabled
[ 0.736303] pci 0000:00:1e.0: MEM window: disabled
[ 0.736303] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.736303] xen: registering gsi 16 triggering 0 polarity 1
[ 0.736303] alloc irq_desc for 16 on node 0
[ 0.736303] alloc kstat_irqs on node 0
[ 0.881677] xen: --> irq=16
(XEN) IOAPIC[0]: Set PCI routing entry (2-16 -> 0x98 -> IRQ 16 Mode:1 Active:1)
[ 0.891871] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.892860] pci 0000:00:01.0: setting latency timer to 64
[ 0.892860] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.892860] xen: registering gsi 16 triggering 0 polarity 1
[ 0.892860] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.892860] xen: --> irq=16
[ 0.925569] Already setup the GSI :16
[ 0.926559] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.926559] pci 0000:00:1c.0: setting latency timer to 64
[ 0.926559] xen: registering gsi 16 triggering 0 polarity 1
[ 0.926559] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.926559] xen: --> irq=16
[ 0.957060] Already setup the GSI :16
[ 0.958049] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.958049] pci 0000:00:1c.4: setting latency timer to 64
[ 0.958049] pci 0000:00:1e.0: setting latency timer to 64
[ 0.958049] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.958049] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.958049] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd1ffffff]
[ 0.958049] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.958049] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.958049] pci_bus 0000:02: resource 1 mem: [0x40000000-0x401fffff]
[ 0.958049] pci_bus 0000:02: resource 2 pref mem [0x40200000-0x403fffff]
[ 0.958049] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff]
[ 0.958049] pci_bus 0000:03: resource 1 mem: [0xd2000000-0xd20fffff]
[ 0.958049] pci_bus 0000:03: resource 2 pref mem [0x40400000-0x405fffff]
[ 0.958049] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 0.958049] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.958049] initcall pcibios_assign_resources+0x0/0x74 returned 0 after 295096 usecs
[ 0.958049] calling sysctl_core_init+0x0/0x38 @ 1
[ 0.958049] initcall sysctl_core_init+0x0/0x38 returned 0 after 75 usecs
[ 0.958049] calling inet_init+0x0/0x20a @ 1
[ 0.958049] NET: Registered protocol family 2
[ 1.088851] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.098099] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.098460] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.098460] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.098460] TCP reno registered
[ 1.098460] initcall inet_init+0x0/0x20a returned 0 after 41844 usecs
[ 1.098460] calling af_unix_init+0x0/0x55 @ 1
[ 1.098460] NET: Registered protocol family 1
[ 1.098460] initcall af_unix_init+0x0/0x55 returned 0 after 4578 usecs
[ 1.098460] calling init_sunrpc+0x0/0x5d @ 1
[ 1.155160] RPC: Registered udp transport module.
[ 1.160064] RPC: Registered tcp transport module.
[ 1.165063] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.171994] initcall init_sunrpc+0x0/0x5d returned 0 after 16855 usecs
[ 1.172981] calling pci_apply_final_quirks+0x0/0x36 @ 1
[ 1.172981] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x003b
[ 1.172981] pci 0000:00:1a.0: Performing full reset
[ 1.196746] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 1.197615] pci 0000:00:1a.1: Performing full reset
[ 1.208935] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b
[ 1.209816] pci 0000:00:1d.0: Performing full reset
[ 1.221044] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 1.222006] pci 0000:00:1d.1: Performing full reset
[ 1.233178] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 1.234112] pci 0000:00:1d.2: Performing full reset
[ 1.245400] pci 0000:01:00.0: Boot video device
[ 1.246246] initcall pci_apply_final_quirks+0x0/0x36 returned 0 after 64182 usecs
[ 1.246246] calling populate_rootfs+0x0/0xd7 @ 1
[ 1.263429] Trying to unpack rootfs image as initramfs...
[ 1.286206] Freeing initrd memory: 7736k freed
[ 1.294092] initcall populate_rootfs+0x0/0xd7 returned 0 after 30842 usecs
[ 1.294092] calling pci_iommu_init+0x0/0x3a @ 1
[ 1.294092] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.294092] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 1.294092] DMA: software IO TLB at phys 0x20000000 - 0x24000000
[ 1.294092] initcall pci_iommu_init+0x0/0x3a returned 0 after 21388 usecs
[ 1.294092] calling irqfd_module_init+0x0/0x31 @ 1
[ 1.341595] initcall irqfd_module_init+0x0/0x31 returned 0 after 288 usecs
[ 1.342571] calling vmx_init+0x0/0x1ff @ 1
[ 1.353398] kvm: no hardware support
[ 1.354317] initcall vmx_init+0x0/0x1ff returned -95 after 3853 usecs
[ 1.354317] initcall vmx_init+0x0/0x1ff returned with error code -95
[ 1.354317] calling svm_init+0x0/0x19 @ 1
[ 1.354317] has_svm: not amd
[ 1.354317] kvm: no hardware support
[ 1.354317] initcall svm_init+0x0/0x19 returned -95 after 6809 usecs
[ 1.354317] initcall svm_init+0x0/0x19 returned with error code -95
[ 1.354317] calling i8259A_init_sysfs+0x0/0x22 @ 1
[ 1.401127] initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 364 usecs
[ 1.402112] calling vsyscall_init+0x0/0x6c @ 1
[ 1.413248] initcall vsyscall_init+0x0/0x6c returned 0 after 58 usecs
[ 1.414226] calling sbf_init+0x0/0xe9 @ 1
[ 1.414226] Simple Boot Flag at 0x44 set to 0x1
[ 1.414226] initcall sbf_init+0x0/0xe9 returned 0 after 4719 usecs
[ 1.414226] calling i8237A_init_sysfs+0x0/0x22 @ 1
[ 1.441220] initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 262 usecs
[ 1.442136] calling add_rtc_cmos+0x0/0xa9 @ 1
[ 1.442136] initcall add_rtc_cmos+0x0/0xa9 returned 0 after 3 usecs
[ 1.442136] calling cache_sysfs_init+0x0/0x64 @ 1
[ 1.466002] initcall cache_sysfs_init+0x0/0x64 returned 0 after 1076 usecs
[ 1.466937] calling mce_init_device+0x0/0xff @ 1
[ 1.478801] initcall mce_init_device+0x0/0xff returned 0 after 551 usecs
[ 1.479734] calling msr_init+0x0/0x14a @ 1
[ 1.490748] initcall msr_init+0x0/0x14a returned 0 after 404 usecs
[ 1.491681] calling cpuid_init+0x0/0x14a @ 1
[ 1.502323] initcall cpuid_init+0x0/0x14a returned 0 after 394 usecs
[ 1.503255] calling ioapic_init_sysfs+0x0/0xb3 @ 1
[ 1.514437] initcall ioapic_init_sysfs+0x0/0xb3 returned 0 after 224 usecs
[ 1.515372] calling add_pcspkr+0x0/0x28 @ 1
[ 1.526381] initcall add_pcspkr+0x0/0x28 returned 0 after 146 usecs
[ 1.527362] calling microcode_init+0x0/0x132 @ 1
[ 1.538288] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.539224] initcall microcode_init+0x0/0x132 returned 0 after 8509 usecs
[ 1.539224] calling start_periodic_check_for_corruption+0x0/0x37 @ 1
[ 1.539224] Scanning for low memory corruption every 60 seconds
[ 1.539224] initcall start_periodic_check_for_corruption+0x0/0x37 returned 0 after 6111 usecs
[ 1.539224] calling audit_classes_init+0x0/0xaf @ 1
[ 1.539224] initcall audit_classes_init+0x0/0xaf returned 0 after 3 usecs
[ 1.539224] calling init_vdso_vars+0x0/0x241 @ 1
[ 1.593501] initcall init_vdso_vars+0x0/0x241 returned 0 after 36 usecs
[ 1.594482] calling ia32_binfmt_init+0x0/0x14 @ 1
[ 1.605659] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 93 usecs
[ 1.606571] calling sysenter_setup+0x0/0x2f1 @ 1
[ 1.606571] initcall sysenter_setup+0x0/0x2f1 returned 0 after 3 usecs
[ 1.606571] calling proc_schedstat_init+0x0/0x22 @ 1
[ 1.606571] initcall proc_schedstat_init+0x0/0x22 returned 0 after 8 usecs
[ 1.606571] calling proc_execdomains_init+0x0/0x22 @ 1
[ 1.606571] initcall proc_execdomains_init+0x0/0x22 returned 0 after 4 usecs
[ 1.606571] calling ioresources_init+0x0/0x3c @ 1
[ 1.606571] initcall ioresources_init+0x0/0x3c returned 0 after 8 usecs
[ 1.606571] calling uid_cache_init+0x0/0xb1 @ 1
[ 1.667171] initcall uid_cache_init+0x0/0xb1 returned 0 after 26 usecs
[ 1.668154] calling init_posix_timers+0x0/0x17a @ 1
[ 1.668154] initcall init_posix_timers+0x0/0x17a returned 0 after 2 usecs
[ 1.668154] calling init_posix_cpu_timers+0x0/0xe5 @ 1
[ 1.668154] initcall init_posix_cpu_timers+0x0/0xe5 returned 0 after 0 usecs
[ 1.668154] calling nsproxy_cache_init+0x0/0x2d @ 1
[ 1.668154] initcall nsproxy_cache_init+0x0/0x2d returned 0 after 0 usecs
[ 1.668154] calling create_proc_profile+0x0/0x283 @ 1
[ 1.668154] initcall create_proc_profile+0x0/0x283 returned 0 after 0 usecs
[ 1.668154] calling timekeeping_init_device+0x0/0x22 @ 1
[ 1.735910] initcall timekeeping_init_device+0x0/0x22 returned 0 after 231 usecs
[ 1.736896] calling init_clocksource_sysfs+0x0/0x50 @ 1
[ 1.749745] initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 228 usecs
[ 1.750676] calling init_timer_list_procfs+0x0/0x2c @ 1
[ 1.750676] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 5 usecs
[ 1.750676] calling init_tstats_procfs+0x0/0x2c @ 1
[ 1.750676] initcall init_tstats_procfs+0x0/0x2c returned 0 after 5 usecs
[ 1.750676] calling futex_init+0x0/0x68 @ 1
[ 1.787794] initcall futex_init+0x0/0x68 returned 0 after 47 usecs
[ 1.788751] calling proc_dma_init+0x0/0x22 @ 1
[ 1.788751] initcall proc_dma_init+0x0/0x22 returned 0 after 4 usecs
[ 1.788751] calling proc_modules_init+0x0/0x22 @ 1
[ 1.788751] initcall proc_modules_init+0x0/0x22 returned 0 after 4 usecs
[ 1.788751] calling kallsyms_init+0x0/0x25 @ 1
[ 1.788751] initcall kallsyms_init+0x0/0x25 returned 0 after 4 usecs
[ 1.788751] calling snapshot_device_init+0x0/0x12 @ 1
[ 1.835229] initcall snapshot_device_init+0x0/0x12 returned 0 after 157 usecs
[ 1.836160] calling crash_save_vmcoreinfo_init+0x0/0x4a5 @ 1
[ 1.836160] initcall crash_save_vmcoreinfo_init+0x0/0x4a5 returned 0 after 26 usecs
[ 1.836160] calling crash_notes_memory_init+0x0/0x37 @ 1
[ 1.836160] initcall crash_notes_memory_init+0x0/0x37 returned 0 after 2 usecs
[ 1.836160] calling pid_namespaces_init+0x0/0x2d @ 1
[ 1.836160] initcall pid_namespaces_init+0x0/0x2d returned 0 after 3 usecs
[ 1.836160] calling audit_init+0x0/0x133 @ 1
[ 1.836160] audit: initializing netlink socket (disabled)
[ 1.893605] type=2000 audit(1305664457.145:1): initialized
[ 1.894561] initcall audit_init+0x0/0x133 returned 0 after 11340 usecs
[ 1.894561] calling audit_tree_init+0x0/0x49 @ 1
[ 1.894561] initcall audit_tree_init+0x0/0x49 returned 0 after 1 usecs
[ 1.894561] calling init_kprobes+0x0/0x148 @ 1
[ 1.933808] initcall init_kprobes+0x0/0x148 returned 0 after 10519 usecs
[ 1.934055] calling utsname_sysctl_init+0x0/0x14 @ 1
[ 1.946346] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 114 usecs
[ 1.947233] calling init_tracepoints+0x0/0x12 @ 1
[ 1.947233] initcall init_tracepoints+0x0/0x12 returned 0 after 0 usecs
[ 1.947233] calling init_events+0x0/0x64 @ 1
[ 1.947233] initcall init_events+0x0/0x64 returned 0 after 2 usecs
[ 1.947233] calling init_sched_switch_trace+0x0/0x12 @ 1
[ 1.947233] initcall init_sched_switch_trace+0x0/0x12 returned 0 after 1 usecs
[ 1.947233] calling init_blk_tracer+0x0/0x55 @ 1
[ 1.947233] initcall init_blk_tracer+0x0/0x55 returned 0 after 1 usecs
[ 1.947233] calling perf_event_sysfs_init+0x0/0x19 @ 1
[ 1.947233] initcall perf_event_sysfs_init+0x0/0x19 returned 0 after 8 usecs
[ 1.947233] calling init_per_zone_wmark_min+0x0/0x67 @ 1
[ 1.947233] initcall init_per_zone_wmark_min+0x0/0x67 returned 0 after 213 usecs
[ 1.947233] calling kswapd_init+0x0/0x20 @ 1
[ 2.034028] initcall kswapd_init+0x0/0x20 returned 0 after 124 usecs
[ 2.035000] calling setup_vmstat+0x0/0xc5 @ 1
[ 2.035000] initcall setup_vmstat+0x0/0xc5 returned 0 after 24 usecs
[ 2.035000] calling mm_sysfs_init+0x0/0x29 @ 1
[ 2.035000] initcall mm_sysfs_init+0x0/0x29 returned 0 after 5 usecs
[ 2.035000] calling proc_vmalloc_init+0x0/0x25 @ 1
[ 2.035000] initcall proc_vmalloc_init+0x0/0x25 returned 0 after 4 usecs
[ 2.035000] calling procswaps_init+0x0/0x22 @ 1
[ 2.035000] initcall procswaps_init+0x0/0x22 returned 0 after 4 usecs
[ 2.035000] calling hugetlb_init+0x0/0x3b0 @ 1
[ 2.035000] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.035000] initcall hugetlb_init+0x0/0x3b0 returned 0 after 6559 usecs
[ 2.035000] calling slab_proc_init+0x0/0x25 @ 1
[ 2.035000] initcall slab_proc_init+0x0/0x25 returned 0 after 5 usecs
[ 2.035000] calling slab_sysfs_init+0x0/0xee @ 1
[ 2.132122] initcall slab_sysfs_init+0x0/0xee returned 0 after 9001 usecs
[ 2.133056] calling fasync_init+0x0/0x2a @ 1
[ 2.133056] initcall fasync_init+0x0/0x2a returned 0 after 7 usecs
[ 2.133056] calling proc_filesystems_init+0x0/0x22 @ 1
[ 2.133056] initcall proc_filesystems_init+0x0/0x22 returned 0 after 6 usecs
[ 2.133056] calling dnotify_init+0x0/0x80 @ 1
[ 2.133056] initcall dnotify_init+0x0/0x80 returned 0 after 13 usecs
[ 2.133056] calling inotify_setup+0x0/0x12 @ 1
[ 2.133056] initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs
[ 2.133056] calling inotify_user_setup+0x0/0xbe @ 1
[ 2.191867] initcall inotify_user_setup+0x0/0xbe returned 0 after 203 usecs
[ 2.192676] calling aio_setup+0x0/0x71 @ 1
[ 2.203939] initcall aio_setup+0x0/0x71 returned 0 after 272 usecs
[ 2.204917] calling proc_locks_init+0x0/0x22 @ 1
[ 2.204917] initcall proc_locks_init+0x0/0x22 returned 0 after 5 usecs
[ 2.204917] calling init_sys32_ioctl+0x0/0x83 @ 1
[ 2.204917] initcall init_sys32_ioctl+0x0/0x83 returned 0 after 13 usecs
[ 2.204917] calling init_mbcache+0x0/0x14 @ 1
[ 2.204917] initcall init_mbcache+0x0/0x14 returned 0 after 0 usecs
[ 2.204917] calling dquot_init+0x0/0xf9 @ 1
[ 2.204917] VFS: Disk quotas dquot_6.5.2
[ 2.255006] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.255930] initcall dquot_init+0x0/0xf9 returned 0 after 11119 usecs
[ 2.255930] calling init_v2_quota_format+0x0/0x12 @ 1
[ 2.255930] initcall init_v2_quota_format+0x0/0x12 returned 0 after 0 usecs
[ 2.255930] calling proc_cmdline_init+0x0/0x22 @ 1
[ 2.255930] initcall proc_cmdline_init+0x0/0x22 returned 0 after 5 usecs
[ 2.255930] calling proc_cpuinfo_init+0x0/0x22 @ 1
[ 2.255930] initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 4 usecs
[ 2.255930] calling proc_devices_init+0x0/0x22 @ 1
[ 2.255930] initcall proc_devices_init+0x0/0x22 returned 0 after 4 usecs
[ 2.255930] calling proc_interrupts_init+0x0/0x22 @ 1
[ 2.255930] initcall proc_interrupts_init+0x0/0x22 returned 0 after 4 usecs
[ 2.255930] calling proc_loadavg_init+0x0/0x22 @ 1
[ 2.255930] initcall proc_loadavg_init+0x0/0x22 returned 0 after 4 usecs
[ 2.255930] calling proc_meminfo_init+0x0/0x22 @ 1
[ 2.255930] initcall proc_meminfo_init+0x0/0x22 returned 0 after 4 usecs
[ 2.255930] calling proc_stat_init+0x0/0x22 @ 1
[ 2.255930] initcall proc_stat_init+0x0/0x22 returned 0 after 4 usecs
[ 2.255930] calling proc_uptime_init+0x0/0x22 @ 1
[ 2.255930] initcall proc_uptime_init+0x0/0x22 returned 0 after 4 usecs
[ 2.255930] calling proc_version_init+0x0/0x22 @ 1
[ 2.255930] initcall proc_version_init+0x0/0x22 returned 0 after 6 usecs
[ 2.255930] calling proc_softirqs_init+0x0/0x22 @ 1
[ 2.255930] initcall proc_softirqs_init+0x0/0x22 returned 0 after 4 usecs
[ 2.255930] calling proc_kcore_init+0x0/0xb5 @ 1
[ 2.255930] initcall proc_kcore_init+0x0/0xb5 returned 0 after 10 usecs
[ 2.255930] calling vmcore_init+0x0/0x333 @ 1
[ 2.255930] initcall vmcore_init+0x0/0x333 returned 0 after 0 usecs
[ 2.255930] calling proc_kmsg_init+0x0/0x25 @ 1
[ 2.255930] initcall proc_kmsg_init+0x0/0x25 returned 0 after 4 usecs
[ 2.255930] calling proc_page_init+0x0/0x42 @ 1
[ 2.255930] initcall proc_page_init+0x0/0x42 returned 0 after 8 usecs
[ 2.255930] calling init_devpts_fs+0x0/0x4c @ 1
[ 2.255930] initcall init_devpts_fs+0x0/0x4c returned 0 after 18 usecs
[ 2.255930] calling init_ext3_fs+0x0/0x71 @ 1
[ 2.467494] initcall init_ext3_fs+0x0/0x71 returned 0 after 394 usecs
[ 2.468426] calling journal_init+0x0/0x99 @ 1
[ 2.479775] initcall journal_init+0x0/0x99 returned 0 after 735 usecs
[ 2.480700] calling init_ramfs_fs+0x0/0x12 @ 1
[ 2.480700] initcall init_ramfs_fs+0x0/0x12 returned 0 after 1 usecs
[ 2.480700] calling init_hugetlbfs_fs+0x0/0x98 @ 1
[ 2.503471] initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 193 usecs
[ 2.504429] calling init_fat_fs+0x0/0x4f @ 1
[ 2.515754] initcall init_fat_fs+0x0/0x4f returned 0 after 389 usecs
[ 2.516687] calling init_vfat_fs+0x0/0x12 @ 1
[ 2.516687] initcall init_vfat_fs+0x0/0x12 returned 0 after 1 usecs
[ 2.516687] calling init_msdos_fs+0x0/0x12 @ 1
[ 2.516687] initcall init_msdos_fs+0x0/0x12 returned 0 after 1 usecs
[ 2.516687] calling init_iso9660_fs+0x0/0x71 @ 1
[ 2.550555] initcall init_iso9660_fs+0x0/0x71 returned 0 after 217 usecs
[ 2.551462] calling init_nfs_fs+0x0/0x148 @ 1
[ 2.563108] initcall init_nfs_fs+0x0/0x148 returned 0 after 739 usecs
[ 2.564056] calling init_nlm+0x0/0x22 @ 1
[ 2.564056] initcall init_nlm+0x0/0x22 returned 0 after 114 usecs
[ 2.564056] calling init_nls_cp437+0x0/0x12 @ 1
[ 2.564056] initcall init_nls_cp437+0x0/0x12 returned 0 after 1 usecs
[ 2.564056] calling init_nls_ascii+0x0/0x12 @ 1
[ 2.564056] initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs
[ 2.564056] calling init_nls_iso8859_1+0x0/0x12 @ 1
[ 2.564056] initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 usecs
[ 2.564056] calling init_nls_utf8+0x0/0x29 @ 1
[ 2.564056] initcall init_nls_utf8+0x0/0x29 returned 0 after 1 usecs
[ 2.564056] calling init_autofs4_fs+0x0/0x26 @ 1
[ 2.633309] initcall init_autofs4_fs+0x0/0x26 returned 0 after 135 usecs
[ 2.634293] calling ipc_init+0x0/0x2f @ 1
[ 2.634293] msgmni has been set to 1755
[ 2.634293] initcall ipc_init+0x0/0x2f returned 0 after 4034 usecs
[ 2.634293] calling ipc_sysctl_init+0x0/0x14 @ 1
[ 2.634293] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 150 usecs
[ 2.634293] calling init_mqueue_fs+0x0/0xb4 @ 1
[ 2.672858] initcall init_mqueue_fs+0x0/0xb4 returned 0 after 323 usecs
[ 2.673679] calling key_proc_init+0x0/0x59 @ 1
[ 2.673679] initcall key_proc_init+0x0/0x59 returned 0 after 9 usecs
[ 2.673679] calling selinux_nf_ip_init+0x0/0x62 @ 1
[ 2.673679] SELinux: Registering netfilter hooks
[ 2.673679] initcall selinux_nf_ip_init+0x0/0x62 returned 0 after 4886 usecs
[ 2.673679] calling init_sel_fs+0x0/0x68 @ 1
[ 2.714069] initcall init_sel_fs+0x0/0x68 returned 0 after 360 usecs
[ 2.715055] calling selnl_init+0x0/0x4d @ 1
[ 2.725353] initcall selnl_init+0x0/0x4d returned 0 after 24 usecs
[ 2.726336] calling sel_netif_init+0x0/0x66 @ 1
[ 2.726336] initcall sel_netif_init+0x0/0x66 returned 0 after 4 usecs
[ 2.726336] calling sel_netnode_init+0x0/0x74 @ 1
[ 2.726336] initcall sel_netnode_init+0x0/0x74 returned 0 after 2 usecs
[ 2.726336] calling sel_netport_init+0x0/0x74 @ 1
[ 2.726336] initcall sel_netport_init+0x0/0x74 returned 0 after 2 usecs
[ 2.726336] calling aurule_init+0x0/0x37 @ 1
[ 2.726336] initcall aurule_init+0x0/0x37 returned 0 after 0 usecs
[ 2.726336] calling crypto_wq_init+0x0/0x2e @ 1
[ 2.789317] initcall crypto_wq_init+0x0/0x2e returned 0 after 178 usecs
[ 2.790294] calling crypto_algapi_init+0x0/0xd @ 1
[ 2.790294] initcall crypto_algapi_init+0x0/0xd returned 0 after 6 usecs
[ 2.790294] calling skcipher_module_init+0x0/0x39 @ 1
[ 2.790294] initcall skcipher_module_init+0x0/0x39 returned 0 after 0 usecs
[ 2.790294] calling chainiv_module_init+0x0/0x12 @ 1
[ 2.790294] initcall chainiv_module_init+0x0/0x12 returned 0 after 1 usecs
[ 2.790294] calling eseqiv_module_init+0x0/0x12 @ 1
[ 2.790294] initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.790294] calling hmac_module_init+0x0/0x12 @ 1
[ 2.790294] initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.790294] calling md5_mod_init+0x0/0x12 @ 1
[ 2.863247] initcall md5_mod_init+0x0/0x12 returned 0 after 133 usecs
[ 2.864234] calling sha1_generic_mod_init+0x0/0x12 @ 1
[ 2.875715] initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 135 usecs
[ 2.876701] calling crypto_ecb_module_init+0x0/0x12 @ 1
[ 2.876701] initcall crypto_ecb_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.876701] calling crypto_cbc_module_init+0x0/0x12 @ 1
[ 2.876701] initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.876701] calling des_generic_mod_init+0x0/0x3f @ 1
[ 2.915524] initcall des_generic_mod_init+0x0/0x3f returned 0 after 266 usecs
[ 2.916510] calling aes_init+0x0/0x12 @ 1
[ 2.927557] initcall aes_init+0x0/0x12 returned 0 after 147 usecs
[ 2.928544] calling arc4_init+0x0/0x12 @ 1
[ 2.938610] initcall arc4_init+0x0/0x12 returned 0 after 147 usecs
[ 2.939596] calling crypto_authenc_module_init+0x0/0x12 @ 1
[ 2.939596] initcall crypto_authenc_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.939596] calling krng_mod_init+0x0/0x12 @ 1
[ 2.964098] alg: No test for stdrng (krng)
[ 2.968502] initcall krng_mod_init+0x0/0x12 returned 0 after 4392 usecs
[ 2.969487] calling proc_genhd_init+0x0/0x3c @ 1
[ 2.969487] initcall proc_genhd_init+0x0/0x3c returned 0 after 10 usecs
[ 2.969487] calling bsg_init+0x0/0x12e @ 1
[ 2.992230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.993157] initcall bsg_init+0x0/0x12e returned 0 after 8091 usecs
[ 2.993157] calling noop_init+0x0/0x14 @ 1
[ 2.993157] io scheduler noop registered
[ 2.993157] initcall noop_init+0x0/0x14 returned 0 after 4104 usecs
[ 2.993157] calling as_init+0x0/0x14 @ 1
[ 2.993157] io scheduler anticipatory registered
[ 2.993157] initcall as_init+0x0/0x14 returned 0 after 4798 usecs
[ 2.993157] calling deadline_init+0x0/0x14 @ 1
[ 2.993157] io scheduler deadline registered
[ 2.993157] initcall deadline_init+0x0/0x14 returned 0 after 4449 usecs
[ 2.993157] calling cfq_init+0x0/0x94 @ 1
[ 3.058675] io scheduler cfq registered (default)
[ 3.059596] initcall cfq_init+0x0/0x94 returned 0 after 5094 usecs
[ 3.059596] calling percpu_counter_startup+0x0/0x3c @ 1
[ 3.059596] initcall percpu_counter_startup+0x0/0x3c returned 0 after 1 usecs
[ 3.059596] calling pci_proc_init+0x0/0x6a @ 1
[ 3.059596] initcall pci_proc_init+0x0/0x6a returned 0 after 159 usecs
[ 3.059596] calling pcie_portdrv_init+0x0/0x4c @ 1
[ 3.100752] alloc irq_desc for 753 on node -1
[ 3.101476] alloc kstat_irqs on node -1
[ 3.109944] pcieport 0000:00:01.0: setting latency timer to 64
[ 3.116704] alloc irq_desc for 752 on node -1
[ 3.117326] alloc kstat_irqs on node -1
[ 3.125880] pcieport 0000:00:1c.0: setting latency timer to 64
[ 3.132755] alloc irq_desc for 751 on node -1
[ 3.133389] alloc kstat_irqs on node -1
[ 3.141952] pcieport 0000:00:1c.4: setting latency timer to 64
[ 3.148803] initcall pcie_portdrv_init+0x0/0x4c returned 0 after 47289 usecs
[ 3.149733] calling aer_service_init+0x0/0x2b @ 1
[ 3.161435] initcall aer_service_init+0x0/0x2b returned 0 after 123 usecs
[ 3.162421] calling pci_hotplug_init+0x0/0x1d @ 1
[ 3.162421] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.162421] initcall pci_hotplug_init+0x0/0x1d returned 0 after 5755 usecs
[ 3.162421] calling pcifront_init+0x0/0x4f @ 1
[ 3.191755] initcall pcifront_init+0x0/0x4f returned 0 after 126 usecs
[ 3.192740] calling fb_console_init+0x0/0x11d @ 1
[ 3.203897] initcall fb_console_init+0x0/0x11d returned 0 after 166 usecs
[ 3.204821] calling genericbl_init+0x0/0x12 @ 1
[ 3.216074] initcall genericbl_init+0x0/0x12 returned 0 after 113 usecs
[ 3.217060] calling xenfb_init+0x0/0x5d @ 1
[ 3.217060] initcall xenfb_init+0x0/0x5d returned -19 after 0 usecs
[ 3.217060] calling efifb_init+0x0/0x1f5 @ 1
[ 3.217060] initcall efifb_init+0x0/0x1f5 returned -19 after 4 usecs
[ 3.217060] calling acpi_reserve_resources+0x0/0xeb @ 1
[ 3.217060] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 4 usecs
[ 3.217060] calling irqrouter_init_sysfs+0x0/0x38 @ 1
[ 3.264370] initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 221 usecs
[ 3.265302] calling acpi_ac_init+0x0/0x45 @ 1
[ 3.276807] initcall acpi_ac_init+0x0/0x45 returned 0 after 193 usecs
[ 3.277740] calling acpi_button_init+0x0/0x56 @ 1
[ 3.288999] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0
[ 3.289930] ACPI: Power Button [PWRB]
[ 3.303128] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.304067] ACPI: Power Button [PWRF]
[ 3.315200] initcall acpi_button_init+0x0/0x56 returned 0 after 25886 usecs
[ 3.316132] calling acpi_fan_init+0x0/0x56 @ 1
[ 3.327531] initcall acpi_fan_init+0x0/0x56 returned 0 after 173 usecs
[ 3.328465] calling acpi_video_init+0x0/0x76 @ 1
[ 3.339695] initcall acpi_video_init+0x0/0x76 returned 0 after 272 usecs
[ 3.340680] calling acpi_processor_init+0x0/0x136 @ 1
[ 3.353384] ACPI: SSDT 00000000bfec278d 001DD (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 3.364599] ACPI: SSDT 00000000bfec296a 0016E (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 3.375217] initcall acpi_processor_init+0x0/0x136 returned 0 after 22474 usecs
[ 3.376085] calling acpi_container_init+0x0/0x42 @ 1
[ 3.394865] initcall acpi_container_init+0x0/0x42 returned 0 after 6245 usecs
[ 3.395055] calling acpi_thermal_init+0x0/0x7b @ 1
[ 3.407757] initcall acpi_thermal_init+0x0/0x7b returned 0 after 199 usecs
[ 3.408689] calling acpi_battery_init+0x0/0x16 @ 1
[ 3.419312] initcall acpi_battery_init+0x0/0x16 returned 0 after 8 usecs
[ 3.420251] calling 1_acpi_battery_init_async+0x0/0x3c @ 610
[ 3.420441] initcall 1_acpi_battery_init_async+0x0/0x3c returned 0 after 178 usecs
[ 3.420389] calling xenbus_probe_initcall+0x0/0x37 @ 1
[ 3.420389] initcall xenbus_probe_initcall+0x0/0x37 returned 0 after 0 usecs
[ 3.420389] calling evtchn_init+0x0/0x6e @ 1
[ 3.459247] Event-channel device installed.
[ 3.460178] initcall evtchn_init+0x0/0x6e returned 0 after 4548 usecs
[ 3.460178] calling gntdev_init+0x0/0x3d @ 1
[ 3.475289] initcall gntdev_init+0x0/0x3d returned 0 after 127 usecs
[ 3.476273] calling pciback_init+0x0/0x151 @ 1
[ 3.487090] initcall pciback_init+0x0/0x151 returned 0 after 264 usecs
[ 3.489314] calling blkif_init+0x0/0x17b @ 1
[ 3.503011] initcall blkif_init+0x0/0x17b returned 0 after 4280 usecs
[ 3.503992] calling blktap_init+0x0/0xf1 @ 1
[ 3.503992] blktap_device_init: blktap device major 253
[ 3.503992] blktap_ring_init: blktap ring major: 251
[ 3.526117] initcall blktap_init+0x0/0xf1 returned 0 after 11379 usecs
[ 3.527054] calling netback_init+0x0/0x3d7 @ 1
[ 3.540593] registering netback
[ 3.544544] initcall netback_init+0x0/0x3d7 returned 0 after 6555 usecs
[ 3.545508] calling xenfs_init+0x0/0x6a @ 1
[ 3.545508] initcall xenfs_init+0x0/0x6a returned 0 after 18 usecs
[ 3.545508] calling hypervisor_subsys_init+0x0/0x25 @ 1
[ 3.545508] initcall hypervisor_subsys_init+0x0/0x25 returned 0 after 0 usecs
[ 3.545508] calling hyper_sysfs_init+0x0/0xfb @ 1
[ 3.580869] initcall hyper_sysfs_init+0x0/0xfb returned 0 after 55 usecs
[ 3.581833] calling platform_pci_module_init+0x0/0x29 @ 1
[ 3.581833] initcall platform_pci_module_init+0x0/0x29 returned -19 after 0 usecs
[ 3.581833] calling rand_initialize+0x0/0x2c @ 1
[ 3.581833] initcall rand_initialize+0x0/0x2c returned 0 after 18 usecs
[ 3.581833] calling tty_init+0x0/0xf5 @ 1
[ 3.628008] initcall tty_init+0x0/0xf5 returned 0 after 9635 usecs
[ 3.628932] calling pty_init+0x0/0x336 @ 1
[ 3.639254] initcall pty_init+0x0/0x336 returned 0 after 251 usecs
[ 3.640227] calling sysrq_init+0x0/0x25 @ 1
[ 3.640227] initcall sysrq_init+0x0/0x25 returned 0 after 16 usecs
[ 3.640227] calling xen_hvc_init+0x0/0xde @ 1
[ 3.640227] alloc irq_desc for 750 on node -1
[ 3.640227] alloc kstat_irqs on node -1
[ 3.671857] initcall xen_hvc_init+0x0/0xde returned 0 after 10021 usecs
[ 3.672830] calling hpet_init+0x0/0x6a @ 1
[ 3.683673] initcall hpet_init+0x0/0x6a returned 0 after 377 usecs
[ 3.684648] calling nvram_init+0x0/0x82 @ 1
[ 3.694892] Non-volatile memory driver v1.3
[ 3.695862] initcall nvram_init+0x0/0x82 returned 0 after 4507 usecs
[ 3.695862] calling mod_init+0x0/0x220 @ 1
[ 3.711018] initcall mod_init+0x0/0x220 returned -19 after 480 usecs
[ 3.711649] calling mod_init+0x0/0xba @ 1
[ 3.711649] initcall mod_init+0x0/0xba returned -19 after 57 usecs
[ 3.711649] calling mod_init+0x0/0x4d @ 1
[ 3.711649] initcall mod_init+0x0/0x4d returned -19 after 0 usecs
[ 3.711649] calling agp_init+0x0/0x26 @ 1
[ 3.711649] Linux agpgart interface v0.103
[ 3.711649] initcall agp_init+0x0/0x26 returned 0 after 4275 usecs
[ 3.711649] calling agp_intel_init+0x0/0x29 @ 1
[ 3.759887] initcall agp_intel_init+0x0/0x29 returned 0 after 222 usecs
[ 3.760858] calling drm_core_init+0x0/0x12d @ 1
[ 3.771915] [drm] Initialized drm 1.1.0 20060810
[ 3.772867] initcall drm_core_init+0x0/0x12d returned 0 after 4949 usecs
[ 3.772867] calling i915_init+0x0/0x52 @ 1
[ 3.772867] initcall i915_init+0x0/0x52 returned 0 after 407 usecs
[ 3.772867] calling cn_proc_init+0x0/0x3d @ 1
[ 3.772867] initcall cn_proc_init+0x0/0x3d returned 0 after 2 usecs
[ 3.772867] calling serial8250_init+0x0/0x143 @ 1
[ 3.772867] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.824600] initcall serial8250_init+0x0/0x143 returned 0 after 7358 usecs
[ 3.825574] calling serial8250_pnp_init+0x0/0x12 @ 1
[ 3.837816] initcall serial8250_pnp_init+0x0/0x12 returned 0 after 612 usecs
[ 3.838791] calling serial8250_pci_init+0x0/0x1b @ 1
[ 3.850760] initcall serial8250_pci_init+0x0/0x1b returned 0 after 174 usecs
[ 3.851730] calling topology_sysfs_init+0x0/0x50 @ 1
[ 3.851730] initcall topology_sysfs_init+0x0/0x50 returned 0 after 28 usecs
[ 3.851730] calling brd_init+0x0/0x1a6 @ 1
[ 3.881325] brd: module loaded
[ 3.882304] initcall brd_init+0x0/0x1a6 returned 0 after 9077 usecs
[ 3.882304] calling loop_init+0x0/0x1b3 @ 1
[ 3.898900] loop: module loaded
[ 3.899855] initcall loop_init+0x0/0x1b3 returned 0 after 6348 usecs
[ 3.899855] calling xlblk_init+0x0/0x7a @ 1
[ 3.913693] initcall xlblk_init+0x0/0x7a returned 0 after 136 usecs
[ 3.914667] calling mac_hid_init+0x0/0x8e @ 1
[ 3.925240] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 3.926215] initcall mac_hid_init+0x0/0x8e returned 0 after 8421 usecs
[ 3.926215] calling spi_transport_init+0x0/0x79 @ 1
[ 3.946039] initcall spi_transport_init+0x0/0x79 returned 0 after 230 usecs
[ 3.947014] calling init_sd+0x0/0x142 @ 1
[ 3.958004] initcall init_sd+0x0/0x142 returned 0 after 259 usecs
[ 3.958949] calling init_sr+0x0/0x46 @ 1
[ 3.968852] initcall init_sr+0x0/0x46 returned 0 after 130 usecs
[ 3.969828] calling init_sg+0x0/0x125 @ 1
[ 3.979735] initcall init_sg+0x0/0x125 returned 0 after 163 usecs
[ 3.980668] calling ahci_init+0x0/0x1b @ 1
[ 3.990810] initcall ahci_init+0x0/0x1b returned 0 after 175 usecs
[ 3.991780] calling piix_init+0x0/0x29 @ 1
[ 3.991780] ata_piix 0000:00:1f.2: version 2.13
[ 3.991780] xen: registering gsi 17 triggering 0 polarity 1
[ 3.991780] alloc irq_desc for 17 on node 0
[ 3.991780] alloc kstat_irqs on node 0
[ 4.021448] xen: --> irq=17
(XEN) IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb8 -> IRQ 17 Mode:1 Active:1)
[ 4.031386] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.032375] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 4.195149] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 4.201557] scsi0 : ata_piix
[ 4.205170] scsi1 : ata_piix
[ 4.211151] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30d0 irq 14
[ 4.211305] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30d8 irq 15
[ 4.225963] c(XEN) IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc0 -> IRQ 18 Mode:1 Active:1)
alling 2_async_port_probe+0x0/0xb3 @ 782
[ 4.225979] xen: registering gsi 18 triggering 0 polarity 1
[ 4.225988] alloc irq_desc for 18 on node 0
[ 4.225992] alloc kstat_irqs on node 0
[ 4.225999] xen: --> irq=18
[ 4.234229] ata_piix 0000:00:1f.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.234248] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 4.234332] calling 3_async_port_probe+0x0/0xb3 @ 610
[ 4.376142] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 4.382524] scsi2 : ata_piix
[ 4.386115] scsi3 : ata_piix
[ 4.390577] ata3: SATA max UDMA/133 cmd 0x3428 ctl 0x341c bmdma 0x30f0 irq 18
[ 4.390577] ata4: SATA max UDMA/133 cmd 0x3420 ctl 0x3418 bmdma 0x30f8 irq 18
[ 4.406326] calling 4_async_port_probe+0x0/0xb3 @ 789
[ 4.406398] initcall piix_init+0x0/0x29 returned 0 after 395120 usecs
[ 4.406403] calling amd_init+0x0/0x1b @ 1
[ 4.406562] initcall amd_init+0x0/0x1b returned 0 after 149 usecs
[ 4.406567] calling mpiix_init+0x0/0x1b @ 1
[ 4.406715] initcall mpiix_init+0x0/0x1b returned 0 after 139 usecs
[ 4.406720] calling oldpiix_init+0x0/0x1b @ 1
[ 4.406865] initcall oldpiix_init+0x0/0x1b returned 0 after 135 usecs
[ 4.406870] calling sch_init+0x0/0x1b @ 1
[ 4.407015] initcall sch_init+0x0/0x1b returned 0 after 136 usecs
[ 4.407020] calling ata_generic_init+0x0/0x1b @ 1
[ 4.407171] initcall ata_generic_init+0x0/0x1b returned 0 after 141 usecs
[ 4.407176] calling e1000_init_module+0x0/0x87 @ 1
[ 4.407180] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 4.407184] Copyright (c) 1999-2006 Intel Corporation.
[ 4.407356] initcall e1000_init_module+0x0/0x87 returned 0 after 169 usecs
[ 4.407361] calling e1000_init_module+0x0/0x6b @ 1
[ 4.407365] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 4.407368] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 4.407529] initcall e1000_init_module+0x0/0x6b returned 0 after 158 usecs
[ 4.407534] calling ne2k_pci_init+0x0/0x1b @ 1
[ 4.407684] initcall ne2k_pci_init+0x0/0x1b returned 0 after 140 usecs
[ 4.407689] calling e100_init_module+0x0/0x5d @ 1
[ 4.407692] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 4.407696] e100: Copyright(c) 1999-2006 Intel Corporation
[ 4.407842] initcall e100_init_module+0x0/0x5d returned 0 after 143 usecs
[ 4.407847] calling tg3_init+0x0/0x1b @ 1
[ 4.407892] tg3.c:v3.102 (September 1, 2009)
[ 4.407926] xen: registering gsi 16 triggering 0 polarity 1
[ 4.407930] xen_allocate_pirq: returning irq 16 for gsi 16
[ 4.407934] xen: --> irq=16
[ 4.407939] Already setup the GSI :16
[ 4.407944] tg3 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.407962] tg3 0000:03:00.0: setting latency timer to 64
[ 4.601050] calling 5_async_port_probe+0x0/0xb3 @ 790
[ 4.611846] eth0: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:1b:fc:80:39:53
[ 4.612304] eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 4.612304] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 4.612304] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.641770] initcall tg3_init+0x0/0x1b returned 0 after 228434 usecs
[ 4.642740] calling bnx2_init+0x0/0x1b @ 1
[ 4.653122] initcall bnx2_init+0x0/0x1b returned 0 after 185 usecs
[ 4.654092] calling sky2_init_module+0x0/0x29 @ 1
[ 4.654092] sky2 driver version 1.25
[ 4.668738] initcall sky2_init_module+0x0/0x29 returned 0 after 3915 usecs
[ 4.669708] calling net_olddevs_init+0x0/0x9e @ 1
[ 4.669708] initcall net_olddevs_init+0x0/0x9e returned 0 after 4 usecs
[ 4.669708] calling init_nic+0x0/0x1b @ 1
[ 4.692562] initcall init_nic+0x0/0x1b returned 0 after 157 usecs
[ 4.693532] calling netif_init+0x0/0x66 @ 1
[ 4.693532] initcall netif_init+0x0/0x66 returned 0 after 0 usecs
[ 4.693532] calling rtl8139_init_module+0x0/0x1b @ 1
[ 4.715507] initcall rtl8139_init_module+0x0/0x1b returned 0 after 176 usecs
[ 4.716477] calling tun_init+0x0/0x93 @ 1
[ 4.716477] tun: Universal TUN/TAP device driver, 1.6
[ 4.716477] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 4.739314] initcall tun_init+0x0/0x93 returned 0 after 11740 usecs
[ 4.740287] calling rtl8169_init_module+0x0/0x1b @ 1
[ 4.751439] initcall rtl8169_init_module+0x0/0x1b returned 0 after 158 usecs
[ 4.752410] calling init_netconsole+0x0/0x22d @ 1
[ 4.752410] console [netcon0] enabled
[ 4.752410] netconsole: network logging started
[ 4.752410] initcall init_netconsole+0x0/0x22d returned 0 after 8554 usecs
[ 4.752410] calling cdrom_init+0x0/0x6a @ 1
[ 4.752410] initcall cdrom_init+0x0/0x6a returned 0 after 153 usecs
[ 4.752410] calling nonstatic_sysfs_init+0x0/0x12 @ 1
[ 4.752410] initcall nonstatic_sysfs_init+0x0/0x12 returned 0 after 1 usecs
[ 4.752410] calling yenta_socket_init+0x0/0x1b @ 1
[ 4.809363] initcall yenta_socket_init+0x0/0x1b returned 0 after 171 usecs
[ 4.810333] calling mon_init+0x0/0x104 @ 1
[ 4.821382] initcall mon_init+0x0/0x104 returned 0 after 313 usecs
[ 4.822306] calling ehci_hcd_init+0x0/0xe7 @ 1
[ 4.822306] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.822306] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 4.822306] xen: registering gsi 16 triggering 0 polarity 1
[ 4.822306] xen_allocate_pirq: returning irq 16 for gsi 16
[ 4.822306] xen: --> irq=16
[ 4.860727] Already setup the GSI :16
[ 4.861713] ehci_hcd 0000:00:1a.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.872192] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.873173] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.883936] /root/Xen/xen-4.2-unstable/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file 'devices'
[ 4.884913] /root/Xen/xen-4.2-unstable/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 4.904723] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.905655] ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4
[ 4.905655] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 4.912056] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.922956] async_waiting @ 789
[ 4.905655] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.905655] ehci_hcd 0000:00:1a.7: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
[ 4.959857] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.960371] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 4.960371] ehci_hcd 0000:00:1a.7: irq 16, io mem 0xd2304000
[ 4.960371] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 4.992435] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 5.007078] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 5.023740] ata2.01: SATA link down (SStatus 4 SControl 300)
[ 5.024328] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 5.024404] usb usb1: default language 0x0409
[ 5.024430] usb usb1: udev 1, busnum 1, minor = 0
[ 5.024434] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.024438] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.024442] usb usb1: Product: EHCI Host Controller
[ 5.024446] usb usb1: Manufacturer: Linux 2.6.32.28 ehci_hcd
[ 5.024449] usb usb1: SerialNumber: 0000:00:1a.7
[ 5.024655] usb usb1: usb_probe_device
[ 5.024660] usb usb1: configuration #1 chosen from 1 choice
[ 5.024677] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 5.024830] hub 1-0:1.0: usb_probe_interface
[ 5.024834] hub 1-0:1.0: usb_probe_interface - got id
[ 5.024838] hub 1-0:1.0: USB hub found
[ 5.025000] hub 1-0:1.0: 4 ports detected
[ 5.025005] hub 1-0:1.0: standalone hub
[ 5.025009] hub 1-0:1.0: no power switching (usb 1.0)
[ 5.025013] hub 1-0:1.0: individual port over-current protection
[ 5.025017] hub 1-0:1.0: power on to power good time: 20ms
[ 5.025037] hub 1-0:1.0: local power source is good
[ 5.025042] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 5.025135] /root/Xen/xen-4.2-unstable/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 5.025250] xen: registering gsi 16 triggering 0 polarity 1
[ 5.025255] xen_allocate_pirq: returning irq 16 for gsi 16
[ 5.025259] xen: --> irq=16
[ 5.025265] Already setup the GSI :16
[ 5.025271] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.025303] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.025305] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.025343] /root/Xen/xen-4.2-unstable/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002'
[ 5.025546] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 5.025558] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 5.025565] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 5.026321] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.026321] ehci_hcd 0000:00:1d.7: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
[ 5.033077] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 5.033080] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 5.033111] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xd2304400
[ 5.033118] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 5.036992] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 5.287809] async_waiting @ 610
[ 5.287896] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.291579] ata4.00: ATAPI: HL-DT-STDVD-RAM GSA-H30L, 1.06, max UDMA/100
[ 5.297528] ata4.00: configured for UDMA/100
[ 5.298021] async_waiting @ 790
[ 5.312828] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT
[ 5.321760] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.328580] ata1.01: SATA link down (SStatus 4 SControl 300)
[ 5.334740] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.341126] hub 1-0:1.0: port 2: status 0501 change 0001
[ 5.346803] usb usb2: default language 0x0409
[ 5.351608] usb usb2: udev 1, busnum 2, minor = 128
[ 5.351741] ata1.00: ATA-7: Hitachi HDS721616PLA380, P22OABBA, max UDMA/100
[ 5.351746] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.352455] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.352455] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.352455] usb usb2: Product: EHCI Host Controller
[ 5.352455] usb usb2: Manufacturer: Linux 2.6.32.28 ehci_hcd
[ 5.352455] usb usb2: SerialNumber: 0000:00:1d.7
[ 5.402362] usb usb2: usb_probe_device
[ 5.403324] usb usb2: configuration #1 chosen from 1 choice
[ 5.406787] ata1.00: configured for UDMA/100
[ 5.406808] async_waiting @ 782
[ 5.406813] async_continuing @ 782 after 0 usec
[ 5.406995] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
[ 5.407824] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.408000] initcall 2_async_port_probe+0x0/0xb3 returned 0 after 1106866 usecs
[ 5.408017] calling 6_sd_probe_async+0x0/0x1db @ 782
[ 5.408142] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 5.408321] sd 0:0:0:0: [sda] Write Protect is off
[ 5.408326] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.408419] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.480791] async_continuing @ 610 after 164096 usec
[ 5.481133] sda:
[ 5.481317] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 5.481467] hub 2-0:1.0: usb_probe_interface
[ 5.481471] hub 2-0:1.0: usb_probe_interface - got id
[ 5.481475] hub 2-0:1.0: USB hub found
[ 5.482035] hub 2-0:1.0: 6 ports detected
[ 5.482039] hub 2-0:1.0: standalone hub
[ 5.482042] hub 2-0:1.0: no power switching (usb 1.0)
[ 5.482046] hub 2-0:1.0: individual port over-current protection
[ 5.482049] hub 2-0:1.0: power on to power good time: 20ms
[ 5.482085] hub 2-0:1.0: local power source is good
[ 5.482090] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 5.482187] /root/Xen/xen-4.2-unstable/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 5.482396] initcall ehci_hcd_init+0x0/0xe7 returned 0 after 634441 usecs
[ 5.482402] calling ohci_hcd_mod_init+0x0/0xba @ 1
[ 5.482405] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.482409] ohci_hcd: block sizes: ed 80 td 96
[ 5.482576] initcall ohci_hcd_mod_init+0x0/0xba returned 0 after 164 usecs
[ 5.482581] calling uhci_hcd_init+0x0/0x11d @ 1
[ 5.482585] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.482821] xen: registering gsi 16 triggering 0 polarity 1
[ 5.482826] xen_allocate_pirq: returning irq 16 for gsi 16
[ 5.482829] xen: --> irq=16
[ 5.482835] Already setup the GSI :16
[ 5.482840] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.482859] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5.482870] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 5.482879] /root/Xen/xen-4.2-unstable/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003'
[ 5.483078] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 5.483093] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 5.483105] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 5.483109] uhci_hcd 0000:00:1a.0: Performing full reset
[ 5.483135] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 5.483149] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003000
[ 5.485735] usb usb3: default language 0x0409
[ 5.485761] usb usb3: udev 1, busnum 3, minor = 256
[ 5.485765] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.485769] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.485773] usb usb3: Product: UHCI Host Controller
[ 5.485777] usb usb3: Manufacturer: Linux 2.6.32.28 uhci_hcd
[ 5.485781] usb usb3: SerialNumber: 0000:00:1a.0
[ 5.486002] usb usb3: usb_probe_device
[ 5.486007] usb usb3: configuration #1 chosen from 1 choice
[ 5.486022] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 5.486203] hub 3-0:1.0: usb_probe_interface
[ 5.486207] hub 3-0:1.0: usb_probe_interface - got id
[ 5.486211] hub 3-0:1.0: USB hub found
[ 5.487319] hub 3-0:1.0: 2 ports detected
[ 5.487323] hub 3-0:1.0: standalone hub
[ 5.487327] hub 3-0:1.0: no power switching (usb 1.0)
[ 5.487330] hub 3-0:1.0: individual port over-current protection
[ 5.487334] hub 3-0:1.0: power on to power good time: 2ms
[ 5.487350] hub 3-0:1.0: local power source is good
[ 5.487354] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 5.487409] /root/Xen/xen-4.2-unstable/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 5.487502] xen: registering gsi 17 triggering 0 polarity 1
[ 5.487506] xen_allocate_pirq: returning irq 17 for gsi 17
[ 5.487510] xen: --> irq=17
[ 5.487515] Already setup the GSI :17
[ 5.487519] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.487537] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 5.487547] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 5.487557] /root/Xen/xen-4.2-unstable/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '004'
[ 5.487742] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 5.487755] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 5.487768] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 5.487772] uhci_hcd 0000:00:1a.1: Performing full reset
[ 5.487798] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[ 5.487841] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00003020
[ 5.487988] usb usb4: default language 0x0409
[ 5.488014] usb usb4: udev 1, busnum 4, minor = 384
[ 5.488018] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.488022] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.488026] usb usb4: Product: UHCI Host Controller
[ 5.488030] usb usb4: Manufacturer: Linux 2.6.32.28 uhci_hcd
[ 5.488033] usb usb4: SerialNumber: 0000:00:1a.1
[ 5.488266] usb usb4: usb_probe_device
[ 5.488271] usb usb4: configuration #1 chosen from 1 choice
[ 5.488287] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 5.488443] hub 4-0:1.0: usb_probe_interface
[ 5.488447] hub 4-0:1.0: usb_probe_interface - got id
[ 5.488451] hub 4-0:1.0: USB hub found
[ 5.489471] hub 4-0:1.0: 2 ports detected
[ 5.489474] hub 4-0:1.0: standalone hub
[ 5.489478] hub 4-0:1.0: no power switching (usb 1.0)
[ 5.489481] hub 4-0:1.0: individual port over-current protection
[ 5.489485] hub 4-0:1.0: power on to power good time: 2ms
[ 5.489501] hub 4-0:1.0: local power source is good
[ 5.489506] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 5.489557] /root/Xen/xen-4.2-unstable/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 5.489654] xen: registering gsi 16 triggering 0 polarity 1
[ 5.489658] xen_allocate_pirq: returning irq 16 for gsi 16
[ 5.489662] xen: --> irq=16
[ 5.489667] Already setup the GSI :16
[ 5.489671] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.489689] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.489699] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.489709] /root/Xen/xen-4.2-unstable/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '005'
[ 5.489883] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 5.489896] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 5.489910] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 5.489913] uhci_hcd 0000:00:1d.0: Performing full reset
[ 5.489941] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 5.489954] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003040
[ 5.493675] usb usb5: default language 0x0409
[ 5.493701] usb usb5: udev 1, busnum 5, minor = 512
[ 5.493705] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.493709] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.493713] usb usb5: Product: UHCI Host Controller
[ 5.493716] usb usb5: Manufacturer: Linux 2.6.32.28 uhci_hcd
[ 5.493720] usb usb5: SerialNumber: 0000:00:1d.0
[ 5.493935] usb usb5: usb_probe_device
[ 5.493939] usb usb5: configuration #1 chosen from 1 choice
[ 5.493955] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 5.494138] hub 5-0:1.0: usb_probe_interface
[ 5.494142] hub 5-0:1.0: usb_probe_interface - got id
[ 5.494145] hub 5-0:1.0: USB hub found
[ 5.494173] hub 5-0:1.0: 2 ports detected
[ 5.494177] hub 5-0:1.0: standalone hub
[ 5.494180] hub 5-0:1.0: no power switching (usb 1.0)
[ 5.494184] hub 5-0:1.0: individual port over-current protection
[ 5.494187] hub 5-0:1.0: power on to power good time: 2ms
[ 5.494204] hub 5-0:1.0: local power source is good
[ 5.494208] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 5.494263] /root/Xen/xen-4.2-unstable/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 5.494387] xen: registering gsi 17 triggering 0 polarity 1
[ 5.494392] xen_allocate_pirq: returning irq 17 for gsi 17
[ 5.494395] xen: --> irq=17
[ 5.494401] Already setup the GSI :17
[ 5.494405] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.494423] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.494433] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.494444] /root/Xen/xen-4.2-unstable/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '006'
[ 5.494623] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 5.494637] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 5.494651] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 5.494655] uhci_hcd 0000:00:1d.1: Performing full reset
[ 5.494682] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 5.494695] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00003060
[ 5.498360] usb usb6: default language 0x0409
[ 5.498386] usb usb6: udev 1, busnum 6, minor = 640
[ 5.498390] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.498394] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.498398] usb usb6: Product: UHCI Host Controller
[ 5.498402] usb usb6: Manufacturer: Linux 2.6.32.28 uhci_hcd
[ 5.498405] usb usb6: SerialNumber: 0000:00:1d.1
[ 5.498631] usb usb6: usb_probe_device
[ 5.498635] usb usb6: configuration #1 chosen from 1 choice
[ 5.498651] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 5.498825] sda1 sda2 <
[ 5.498980] hub 6-0:1.0: usb_probe_interface
[ 5.498984] hub 6-0:1.0: usb_probe_interface - got id
[ 5.498988] hub 6-0:1.0: USB hub found
[ 5.500100] hub 6-0:1.0: 2 ports detected
[ 5.500104] hub 6-0:1.0: standalone hub
[ 5.500107] hub 6-0:1.0: no power switching (usb 1.0)
[ 5.500111] hub 6-0:1.0: individual port over-current protection
[ 5.500114] hub 6-0:1.0: power on to power good time: 2ms
[ 5.500131] hub 6-0:1.0: local power source is good
[ 5.500135] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 5.500189] /root/Xen/xen-4.2-unstable/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 5.500288] xen: registering gsi 18 triggering 0 polarity 1
[ 5.500292] xen_allocate_pirq: returning irq 18 for gsi 18
[ 5.500295] xen: --> irq=18
[ 5.500301] Already setup the GSI :18
[ 5.500305] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.500323] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.500333] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.500343] /root/Xen/xen-4.2-unstable/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '007'
[ 5.500522] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 5.500536] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 5.500549] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 5.500553] uhci_hcd 0000:00:1d.2: Performing full reset
[ 5.500581] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 5.500594] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003080
[ 5.503865] usb usb7: default language 0x0409
[ 5.503890] usb usb7: udev 1, busnum 7, minor = 768
[ 5.503894] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.503898] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.503902] usb usb7: Product: UHCI Host Controller
[ 5.503906] usb usb7: Manufacturer: Linux 2.6.32.28 uhci_hcd
[ 5.503910] usb usb7: SerialNumber: 0000:00:1d.2
[ 5.504151] usb usb7: usb_probe_device
[ 5.504156] usb usb7: configuration #1 chosen from 1 choice
[ 5.504172] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 5.504329] hub 7-0:1.0: usb_probe_interface
[ 5.504333] hub 7-0:1.0: usb_probe_interface - got id
[ 5.504336] hub 7-0:1.0: USB hub found
[ 5.505452] hub 7-0:1.0: 2 ports detected
[ 5.505456] hub 7-0:1.0: standalone hub
[ 5.505460] hub 7-0:1.0: no power switching (usb 1.0)
[ 5.505463] hub 7-0:1.0: individual port over-current protection
[ 5.505467] hub 7-0:1.0: power on to power good time: 2ms
[ 5.505483] hub 7-0:1.0: local power source is good
[ 5.505487] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 5.505539] /root/Xen/xen-4.2-unstable/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 5.505754] initcall uhci_hcd_init+0x0/0x11d returned 0 after 22621 usecs
[ 5.505759] calling usblp_init+0x0/0x1b @ 1
[ 5.505901] usbcore: registered new interface driver usblp
[ 5.505909] initcall usblp_init+0x0/0x1b returned 0 after 141 usecs
[ 5.505914] calling usb_stor_init+0x0/0x50 @ 1
[ 5.505917] Initializing USB Mass Storage driver...
[ 5.506094] usbcore: registered new interface driver usb-storage
[ 5.506101] USB Mass Storage support registered.
[ 5.506107] initcall usb_stor_init+0x0/0x50 returned 0 after 183 usecs
[ 5.506112] calling usb_usual_init+0x0/0x3d @ 1
[ 5.506270] usbcore: registered new interface driver libusual
[ 5.506278] initcall usb_usual_init+0x0/0x3d returned 0 after 156 usecs
[ 5.506283] calling i8042_init+0x0/0x3a7 @ 1
[ 5.506776] PNP: No PS/2 controller found. Probing ports directly.
[ 5.509610] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.509623] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.509943] initcall i8042_init+0x0/0x3a7 returned 0 after 3567 usecs
[ 5.509948] calling serport_init+0x0/0x34 @ 1
[ 5.509954] initcall serport_init+0x0/0x34 returned 0 after 1 usecs
[ 5.509959] calling mousedev_init+0x0/0x62 @ 1
[ 5.510321] mice: PS/2 mouse device common for all mice
[ 5.510328] initcall mousedev_init+0x0/0x62 returned 0 after 354 usecs
[ 5.510332] calling evdev_init+0x0/0x12 @ 1
[ 5.510737] initcall evdev_init+0x0/0x12 returned 0 after 388 usecs
[ 5.510742] calling atkbd_init+0x0/0x27 @ 1
[ 5.510874] initcall atkbd_init+0x0/0x27 returned 0 after 123 usecs
[ 5.510879] calling psmouse_init+0x0/0x6f @ 1
[ 5.511123] initcall psmouse_init+0x0/0x6f returned 0 after 232 usecs
[ 5.511128] calling xenkbd_init+0x0/0x5d @ 1
[ 5.511133] initcall xenkbd_init+0x0/0x5d returned -19 after 0 usecs
[ 5.511138] calling cmos_init+0x0/0x6a @ 1
[ 5.511190] rtc_cmos 00:04: RTC can wake from S4
[ 5.511378] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 5.511433] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 5.511554] initcall cmos_init+0x0/0x6a returned 0 after 400 usecs
[ 5.511559] calling i2c_i801_init+0x0/0x1b @ 1
[ 5.511620] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 5.511631] xen: registering gsi 17 triggering 0 polarity 1
[ 5.511636] xen_allocate_pirq: returning irq 17 for gsi 17
[ 5.511639] xen: --> irq=17
[ 5.511645] Already setup the GSI :17
[ 5.511649] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.511952] initcall i2c_i801_init+0x0/0x1b returned 0 after 377 usecs
[ 5.511958] calling xen_wdt_init_module+0x0/0x74 @ 1
[ 5.511961] wdt: Xen WatchDog Timer Driver v0.01
[ 5.512375] wdt: initialized (timeout=60s, nowayout=0)
[ 5.512386] initcall xen_wdt_init_module+0x0/0x74 returned 0 after 412 usecs
[ 5.512391] calling dm_init+0x0/0x46 @ 1
[ 5.513135] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 5.513141] initcall dm_init+0x0/0x46 returned 0 after 727 usecs
[ 5.513146] calling dm_mirror_init+0x0/0x79 @ 1
[ 5.513322] initcall dm_mirror_init+0x0/0x79 returned 0 after 166 usecs
[ 5.513328] calling dm_dirty_log_init+0x0/0x59 @ 1
[ 5.513335] initcall dm_dirty_log_init+0x0/0x59 returned 0 after 2 usecs
[ 5.513340] calling dm_zero_init+0x0/0x31 @ 1
[ 5.513345] initcall dm_zero_init+0x0/0x31 returned 0 after 0 usecs
[ 5.513350] calling cpufreq_gov_dbs_init+0x0/0xab @ 1
[ 5.513467] initcall cpufreq_gov_dbs_init+0x0/0xab returned 0 after 109 usecs
[ 5.513473] calling init_ladder+0x0/0x12 @ 1
[ 5.513478] cpuidle: using governor ladder
[ 5.513483] initcall init_ladder+0x0/0x12 returned 0 after 4 usecs
[ 5.513487] calling init_menu+0x0/0x12 @ 1
[ 5.513491] cpuidle: using governor menu
[ 5.513496] initcall init_menu+0x0/0x12 returned 0 after 3 usecs
[ 5.513500] calling efivars_init+0x0/0x1ef @ 1
[ 5.513506] initcall efivars_init+0x0/0x1ef returned -19 after 0 usecs
[ 5.513510] calling hid_init+0x0/0x66 @ 1
[ 5.513739] initcall hid_init+0x0/0x66 returned 0 after 216 usecs
[ 5.513744] calling a4_init+0x0/0x1b @ 1
[ 5.513866] initcall a4_init+0x0/0x1b returned 0 after 113 usecs
[ 5.513871] calling apple_init+0x0/0x39 @ 1
[ 5.514004] initcall apple_init+0x0/0x39 returned 0 after 123 usecs
[ 5.514009] calling belkin_init+0x0/0x1b @ 1
[ 5.514153] initcall belkin_init+0x0/0x1b returned 0 after 135 usecs
[ 5.514159] calling ch_init+0x0/0x1b @ 1
[ 5.514276] initcall ch_init+0x0/0x1b returned 0 after 109 usecs
[ 5.514281] calling ch_init+0x0/0x1b @ 1
[ 5.514405] initcall ch_init+0x0/0x1b returned 0 after 115 usecs
[ 5.514410] calling cp_init+0x0/0x1b @ 1
[ 5.514530] initcall cp_init+0x0/0x1b returned 0 after 111 usecs
[ 5.514535] calling dr_init+0x0/0x1b @ 1
[ 5.514653] initcall dr_init+0x0/0x1b returned 0 after 109 usecs
[ 5.514658] calling ez_init+0x0/0x1b @ 1
[ 5.514775] initcall ez_init+0x0/0x1b returned 0 after 109 usecs
[ 5.514780] calling gyration_init+0x0/0x1b @ 1
[ 5.514899] initcall gyration_init+0x0/0x1b returned 0 after 109 usecs
[ 5.514904] calling ks_init+0x0/0x1b @ 1
[ 5.515024] initcall ks_init+0x0/0x1b returned 0 after 112 usecs
[ 5.515029] calling kye_init+0x0/0x1b @ 1
[ 5.515166] initcall kye_init+0x0/0x1b returned 0 after 127 usecs
[ 5.515171] calling lg_init+0x0/0x1b @ 1
[ 5.515289] initcall lg_init+0x0/0x1b returned 0 after 109 usecs
[ 5.515294] calling ms_init+0x0/0x1b @ 1
[ 5.515412] initcall ms_init+0x0/0x1b returned 0 after 109 usecs
[ 5.515417] calling mr_init+0x0/0x1b @ 1
[ 5.515540] sda5initcall mr_init+0x0/0x1b returned 0 after 289 usecs
[ 5.515723] calling ntrig_init+0x0/0x1b @ 1
[ 5.515846] initcall ntrig_init+0x0/0x1b returned 0 after 114 usecs
[ 5.515851] calling pl_init+0x0/0x1b @ 1
[ 5.515968] initcall pl_init+0x0/0x1b returned 0 after 109 usecs
[ 5.515973] calling pl_init+0x0/0x1b @ 1
[ 5.516110] initcall pl_init+0x0/0x1b returned 0 after 127 usecs
[ 5.516115] calling samsung_init+0x0/0x1b @ 1
[ 5.516234] initcall samsung_init+0x0/0x1b returned 0 after 110 usecs
[ 5.516239] calling sjoy_init+0x0/0x1b @ 1
[ 5.516360] initcall sjoy_init+0x0/0x1b returned 0 after 112 usecs
[ 5.516366] calling sony_init+0x0/0x1b @ 1
[ 5.516497] initcall sony_init+0x0/0x1b returned 0 after 121 usecs
[ 5.516502] calling sp_init+0x0/0x1b @ 1
[ 5.516631] initcall sp_init+0x0/0x1b returned 0 after 120 usecs
[ 5.516636] calling ga_init+0x0/0x1b @ 1
[ 5.516755] initcall ga_init+0x0/0x1b returned 0 after 110 usecs
[ 5.516760] calling tm_init+0x0/0x1b @ 1
[ 5.516881] initcall tm_init+0x0/0x1b returned 0 after 111 usecs
[ 5.516886] calling ts_init+0x0/0x1b @ 1
[ 5.517008] initcall ts_init+0x0/0x1b returned 0 after 113 usecs
[ 5.517013] calling twinhan_init+0x0/0x1b @ 1
[ 5.517156] initcall twinhan_init+0x0/0x1b returned 0 after 133 usecs
[ 5.517161] calling zp_init+0x0/0x1b @ 1
[ 5.517279] initcall zp_init+0x0/0x1b returned 0 after 109 usecs
[ 5.517284] calling hid_init+0x0/0xc7 @ 1
[ 5.517604] usbcore: registered new interface driver hiddev
[ 5.517742] usbcore: registered new interface driver usbhid
[ 5.517748] usbhid: v2.6:USB HID core driver
[ 5.517754] initcall hid_init+0x0/0xc7 returned 0 after 453 usecs
[ 5.517759] calling eeepc_laptop_init+0x0/0x41 @ 1
[ 5.518078] initcall eeepc_laptop_init+0x0/0x41 returned -19 after 305 usecs
[ 5.518083] calling init_soundcore+0x0/0x95 @ 1
[ 5.518205] initcall init_soundcore+0x0/0x95 returned 0 after 112 usecs
[ 5.518210] calling alsa_sound_init+0x0/0x95 @ 1
[ 5.518263] Advanced Linux Sound Architecture Driver Version 1.0.21.
[ 5.518269] initcall alsa_sound_init+0x0/0x95 returned 0 after 52 usecs
[ 5.518274] calling alsa_hwdep_init+0x0/0x64 @ 1
[ 5.518289] initcall alsa_hwdep_init+0x0/0x64 returned 0 after 9 usecs
[ 5.518294] calling alsa_timer_init+0x0/0x15c @ 1
[ 5.518451] initcall alsa_timer_init+0x0/0x15c returned 0 after 147 usecs
[ 5.518456] calling snd_hrtimer_init+0x0/0xf7 @ 1
[ 5.518466] initcall snd_hrtimer_init+0x0/0xf7 returned 0 after 4 usecs
[ 5.518471] calling alsa_pcm_init+0x0/0x6c @ 1
[ 5.518482] initcall alsa_pcm_init+0x0/0x6c returned 0 after 6 usecs
[ 5.518487] calling snd_mem_init+0x0/0x2c @ 1
[ 5.518498] initcall snd_mem_init+0x0/0x2c returned 0 after 5 usecs
[ 5.518503] calling alsa_mixer_oss_init+0x0/0x3c @ 1
[ 5.518508] initcall alsa_mixer_oss_init+0x0/0x3c returned 0 after 0 usecs
[ 5.518513] calling alsa_pcm_oss_init+0x0/0x87 @ 1
[ 5.518519] initcall alsa_pcm_oss_init+0x0/0x87 returned 0 after 0 usecs
[ 5.518524] calling alsa_seq_init+0x0/0x4c @ 1
[ 5.518687] initcall alsa_seq_init+0x0/0x4c returned 0 after 153 usecs
[ 5.518693] calling alsa_seq_device_init+0x0/0x5b @ 1
[ 5.518703] initcall alsa_seq_device_init+0x0/0x5b returned 0 after 5 usecs
[ 5.518709] calling alsa_seq_midi_event_init+0x0/0x8 @ 1
[ 5.518714] initcall alsa_seq_midi_event_init+0x0/0x8 returned 0 after 0 usecs
[ 5.518719] calling alsa_seq_oss_init+0x0/0x167 @ 1
[ 5.528503] initcall alsa_seq_oss_init+0x0/0x167 returned 0 after 9546 usecs
[ 5.528510] calling alsa_seq_dummy_init+0x0/0xbd @ 1
[ 5.528529] initcall alsa_seq_dummy_init+0x0/0xbd returned 0 after 13 usecs
[ 5.528534] calling patch_realtek_init+0x0/0x12 @ 1
[ 5.528540] initcall patch_realtek_init+0x0/0x12 returned 0 after 0 usecs
[ 5.528545] calling patch_cmedia_init+0x0/0x12 @ 1
[ 5.528551] initcall patch_cmedia_init+0x0/0x12 returned 0 after 0 usecs
[ 5.528556] calling patch_analog_init+0x0/0x12 @ 1
[ 5.528561] initcall patch_analog_init+0x0/0x12 returned 0 after 0 usecs
[ 5.528566] calling patch_sigmatel_init+0x0/0x12 @ 1
[ 5.528572] initcall patch_sigmatel_init+0x0/0x12 returned 0 after 0 usecs
[ 5.528577] calling patch_si3054_init+0x0/0x12 @ 1
[ 5.528582] initcall patch_si3054_init+0x0/0x12 returned 0 after 0 usecs
[ 5.528587] calling patch_atihdmi_init+0x0/0x12 @ 1
[ 5.528593] initcall patch_atihdmi_init+0x0/0x12 returned 0 after 0 usecs
[ 5.528598] calling patch_cirrus_init+0x0/0x12 @ 1
[ 5.528603] initcall patch_cirrus_init+0x0/0x12 returned 0 after 0 usecs
[ 5.528608] calling patch_ca0110_init+0x0/0x12 @ 1
[ 5.528614] initcall patch_ca0110_init+0x0/0x12 returned 0 after 0 usecs
[ 5.528619] calling patch_conexant_init+0x0/0x12 @ 1
[ 5.528624] initcall patch_conexant_init+0x0/0x12 returned 0 after 0 usecs
[ 5.528629] calling patch_via_init+0x0/0x12 @ 1
[ 5.528634] initcall patch_via_init+0x0/0x12 returned 0 after 0 usecs
[ 5.528638] calling patch_nvhdmi_init+0x0/0x12 @ 1
[ 5.528643] initcall patch_nvhdmi_init+0x0/0x12 returned 0 after 0 usecs
[ 5.528648] calling patch_intelhdmi_init+0x0/0x12 @ 1
[ 5.528652] initcall patch_intelhdmi_init+0x0/0x12 returned 0 after 0 usecs
[ 5.528657] calling alsa_card_azx_init+0x0/0x1b @ 1
[ 5.528743] xen: registering gsi 16 triggering 0 polarity 1
[ 5.528747] xen_allocate_pirq: returning irq 16 for gsi 16
[ 5.528751] xen: --> irq=16
[ 5.528758] Already setup the GSI :16
[ 5.528763] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.528822] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.534237] sda6 sda7 sda8
[ 5.582135] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
[ 5.582144] hub 2-0:1.0: port 6: status 0501 change 0001
[ 5.587111] uhci_hcd 0000:00:1a.0: port 2 portsc 008a,00
[ 5.589127] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 5.594125] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 5.600126] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 5.600288] sda9 >
[ 6.704075] usb usb3: suspend_rh (auto-stop)
[ 6.704111] usb usb4: suspend_rh (auto-stop)
[ 6.704148] usb usb5: suspend_rh (auto-stop)
[ 6.704185] usb usb6: suspend_rh (auto-stop)
[ 7.704079] initcall 3_async_port_probe+0x0/0xb3 returned 0 after 3453637 usecs
[ 7.778825] async_continuing @ 789 after 2788929 usec
[ 7.778853] hub 1-0:1.0: state 7 ports 4 chg 0004 evt 0000
[ 7.778870] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 7.778884] ehci_hcd 0000:00:1a.7: port 2 low speed --> companion
[ 7.778912] hub 4-0:1.0: hub_suspend
[ 7.778922] usb usb4: bus auto-suspend
[ 7.778927] usb usb4: suspend_rh
[ 7.778954] hub 5-0:1.0: hub_suspend
[ 7.778963] usb usb5: bus auto-suspend
[ 7.778967] usb usb5: suspend_rh
[ 7.778992] hub 6-0:1.0: hub_suspend
[ 7.779001] usb usb6: bus auto-suspend
[ 7.779005] usb usb6: suspend_rh
[ 7.779054] initcall 4_async_port_probe+0x0/0xb3 returned 0 after 3160292 usecs
[ 7.844958] async_continuing @ 790 after 2487238 usec
[ 7.845011] usb usb3: wakeup_rh (auto-start)
[ 7.845075] uhci_hcd 0000:00:1d.2: port 2 portsc 008a,00
[ 7.846618] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.846626] initcall 6_sd_probe_async+0x0/0x1db returned 0 after 2381447 usecs
[ 7.853104] initcall alsa_card_azx_init+0x0/0x1b returned 0 after 2269960 usecs
[ 7.853110] calling alsa_sound_last_init+0x0/0x6f @ 1
[ 7.853113] ALSA device list:
[ 7.853116] #0: HDA Intel at 0xd2300000 irq 16
[ 7.853121] initcall alsa_sound_last_init+0x0/0x6f returned 0 after 6 usecs
[ 7.853126] calling flow_cache_init+0x0/0x1a7 @ 1
[ 7.853172] initcall flow_cache_init+0x0/0x1a7 returned 0 after 39 usecs
[ 7.853176] calling llc_init+0x0/0x20 @ 1
[ 7.853183] initcall llc_init+0x0/0x20 returned 0 after 2 usecs
[ 7.853187] calling snap_init+0x0/0x39 @ 1
[ 7.853193] initcall snap_init+0x0/0x39 returned 0 after 1 usecs
[ 7.853197] calling rif_init+0x0/0x85 @ 1
[ 7.853274] initcall rif_init+0x0/0x85 returned 0 after 69 usecs
[ 7.853278] calling blackhole_module_init+0x0/0x12 @ 1
[ 7.853284] initcall blackhole_module_init+0x0/0x12 returned 0 after 0 usecs
[ 7.853289] calling nfnetlink_init+0x0/0x60 @ 1
[ 7.853293] Netfilter messages via NETLINK v0.30.
[ 7.853308] initcall nfnetlink_init+0x0/0x60 returned 0 after 13 usecs
[ 7.853312] calling nfnetlink_log_init+0x0/0xd6 @ 1
[ 7.853332] initcall nfnetlink_log_init+0x0/0xd6 returned 0 after 14 usecs
[ 7.853337] calling nf_conntrack_standalone_init+0x0/0x12 @ 1
[ 7.853342] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 7.854097] initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after 736 usecs
[ 7.854103] calling ctnetlink_init+0x0/0x76 @ 1
[ 7.854106] ctnetlink v0.93: registering with nfnetlink.
[ 7.854112] initcall ctnetlink_init+0x0/0x76 returned 0 after 4 usecs
[ 7.854116] calling nf_conntrack_ftp_init+0x0/0x1dc @ 1
[ 7.854124] initcall nf_conntrack_ftp_init+0x0/0x1dc returned 0 after 2 usecs
[ 7.854129] calling nf_conntrack_irc_init+0x0/0x1a8 @ 1
[ 7.854135] initcall nf_conntrack_irc_init+0x0/0x1a8 returned 0 after 1 usecs
[ 7.854140] calling nf_conntrack_sip_init+0x0/0x183 @ 1
[ 7.854146] initcall nf_conntrack_sip_init+0x0/0x183 returned 0 after 0 usecs
[ 7.854150] calling xt_init+0x0/0x13b @ 1
[ 7.854157] initcall xt_init+0x0/0x13b returned 0 after 1 usecs
[ 7.854161] calling tcpudp_mt_init+0x0/0x17 @ 1
[ 7.854167] initcall tcpudp_mt_init+0x0/0x17 returned 0 after 1 usecs
[ 7.854172] calling connsecmark_tg_init+0x0/0x12 @ 1
[ 7.854177] initcall connsecmark_tg_init+0x0/0x12 returned 0 after 0 usecs
[ 7.854182] calling mark_tg_init+0x0/0x12 @ 1
[ 7.854186] initcall mark_tg_init+0x0/0x12 returned 0 after 0 usecs
[ 7.854191] calling nflog_tg_init+0x0/0x12 @ 1
[ 7.854196] initcall nflog_tg_init+0x0/0x12 returned 0 after 0 usecs
[ 7.854200] calling secmark_tg_init+0x0/0x12 @ 1
[ 7.854205] initcall secmark_tg_init+0x0/0x12 returned 0 after 0 usecs
[ 7.854210] calling tcpmss_tg_init+0x0/0x17 @ 1
[ 7.854215] initcall tcpmss_tg_init+0x0/0x17 returned 0 after 0 usecs
[ 7.854220] calling conntrack_mt_init+0x0/0x17 @ 1
[ 7.854225] initcall conntrack_mt_init+0x0/0x17 returned 0 after 0 usecs
[ 7.854229] calling mark_mt_init+0x0/0x12 @ 1
[ 7.854234] initcall mark_mt_init+0x0/0x12 returned 0 after 0 usecs
[ 7.854239] calling policy_mt_init+0x0/0x17 @ 1
[ 7.854244] initcall policy_mt_init+0x0/0x17 returned 0 after 0 usecs
[ 7.854248] calling state_mt_init+0x0/0x17 @ 1
[ 7.854253] initcall state_mt_init+0x0/0x17 returned 0 after 0 usecs
[ 7.854258] calling sysctl_ipv4_init+0x0/0x4e @ 1
[ 7.856300] initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 1988 usecs
[ 7.856305] calling init_syncookies+0x0/0x19 @ 1
[ 7.856350] initcall init_syncookies+0x0/0x19 returned 0 after 38 usecs
[ 7.856355] calling tunnel4_init+0x0/0x66 @ 1
[ 7.856361] initcall tunnel4_init+0x0/0x66 returned 0 after 1 usecs
[ 7.856368] calling ipv4_netfilter_init+0x0/0x12 @ 1
[ 7.856374] initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 0 usecs
[ 7.856379] calling nf_conntrack_l3proto_ipv4_init+0x0/0x14b @ 1
[ 7.857664] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x14b returned 0 after 1249 usecs
[ 7.857669] calling nf_nat_init+0x0/0x118 @ 1
[ 7.857697] initcall nf_nat_init+0x0/0x118 returned 0 after 21 usecs
[ 7.857701] calling nf_defrag_init+0x0/0x17 @ 1
[ 7.857707] initcall nf_defrag_init+0x0/0x17 returned 0 after 0 usecs
[ 7.857711] calling nf_nat_ftp_init+0x0/0x21 @ 1
[ 7.857716] initcall nf_nat_ftp_init+0x0/0x21 returned 0 after 0 usecs
[ 7.857721] calling nf_nat_irc_init+0x0/0x21 @ 1
[ 7.857726] initcall nf_nat_irc_init+0x0/0x21 returned 0 after 0 usecs
[ 7.857730] calling nf_nat_sip_init+0x0/0x9e @ 1
[ 7.857735] initcall nf_nat_sip_init+0x0/0x9e returned 0 after 0 usecs
[ 7.857740] calling ip_tables_init+0x0/0xb8 @ 1
[ 7.857760] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.857765] initcall ip_tables_init+0x0/0xb8 returned 0 after 19 usecs
[ 7.857770] calling iptable_filter_init+0x0/0x69 @ 1
[ 7.857782] initcall iptable_filter_init+0x0/0x69 returned 0 after 7 usecs
[ 7.857787] calling iptable_mangle_init+0x0/0x41 @ 1
[ 7.857798] initcall iptable_mangle_init+0x0/0x41 returned 0 after 5 usecs
[ 7.857803] calling nf_nat_standalone_init+0x0/0x82 @ 1
[ 7.857814] initcall nf_nat_standalone_init+0x0/0x82 returned 0 after 5 usecs
[ 7.857818] calling log_tg_init+0x0/0x29 @ 1
[ 7.857824] initcall log_tg_init+0x0/0x29 returned 0 after 0 usecs
[ 7.857828] calling masquerade_tg_init+0x0/0x39 @ 1
[ 7.857837] initcall masquerade_tg_init+0x0/0x39 returned 0 after 3 usecs
[ 7.857841] calling reject_tg_init+0x0/0x12 @ 1
[ 7.857846] initcall reject_tg_init+0x0/0x12 returned 0 after 0 usecs
[ 7.857851] calling ulog_tg_init+0x0/0xf4 @ 1
[ 7.857865] initcall ulog_tg_init+0x0/0xf4 returned 0 after 8 usecs
[ 7.857869] calling cubictcp_register+0x0/0x5c @ 1
[ 7.857874] TCP cubic registered
[ 7.857879] initcall cubictcp_register+0x0/0x5c returned 0 after 4 usecs
[ 7.857884] calling xfrm_user_init+0x0/0x4a @ 1
[ 7.857887] Initializing XFRM netlink socket
[ 7.857898] initcall xfrm_user_init+0x0/0x4a returned 0 after 8 usecs
[ 7.857903] calling inet6_init+0x0/0x2a6 @ 1
[ 7.858778] NET: Registered protocol family 10
[ 7.866296] initcall inet6_init+0x0/0x2a6 returned 0 after 8189 usecs
[ 7.866302] calling ah6_init+0x0/0x66 @ 1
[ 7.866308] initcall ah6_init+0x0/0x66 returned 0 after 1 usecs
[ 7.866313] calling esp6_init+0x0/0x66 @ 1
[ 7.866318] initcall esp6_init+0x0/0x66 returned 0 after 0 usecs
[ 7.866323] calling xfrm6_transport_init+0x0/0x17 @ 1
[ 7.866329] initcall xfrm6_transport_init+0x0/0x17 returned 0 after 0 usecs
[ 7.866334] calling xfrm6_mode_tunnel_init+0x0/0x17 @ 1
[ 7.866339] initcall xfrm6_mode_tunnel_init+0x0/0x17 returned 0 after 0 usecs
[ 7.866344] calling xfrm6_beet_init+0x0/0x17 @ 1
[ 7.866349] initcall xfrm6_beet_init+0x0/0x17 returned 0 after 0 usecs
[ 7.866354] calling ip6_tables_init+0x0/0xb8 @ 1
[ 7.866376] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.866381] initcall ip6_tables_init+0x0/0xb8 returned 0 after 21 usecs
[ 7.866386] calling ip6table_filter_init+0x0/0x69 @ 1
[ 7.866400] initcall ip6table_filter_init+0x0/0x69 returned 0 after 8 usecs
[ 7.866404] calling ip6table_mangle_init+0x0/0x41 @ 1
[ 7.866417] initcall ip6table_mangle_init+0x0/0x41 returned 0 after 6 usecs
[ 7.866422] calling nf_conntrack_l3proto_ipv6_init+0x0/0x11a @ 1
[ 7.866621] initcall nf_conntrack_l3proto_ipv6_init+0x0/0x11a returned 0 after 188 usecs
[ 7.866627] calling ipv6header_mt6_init+0x0/0x12 @ 1
[ 7.866632] initcall ipv6header_mt6_init+0x0/0x12 returned 0 after 0 usecs
[ 7.866637] calling log_tg6_init+0x0/0x29 @ 1
[ 7.866642] initcall log_tg6_init+0x0/0x29 returned 0 after 0 usecs
[ 7.866647] calling reject_tg6_init+0x0/0x12 @ 1
[ 7.866652] initcall reject_tg6_init+0x0/0x12 returned 0 after 0 usecs
[ 7.866657] calling sit_init+0x0/0x71 @ 1
[ 7.866660] IPv6 over IPv4 tunneling driver
[ 7.870364] initcall sit_init+0x0/0x71 returned 0 after 3614 usecs
[ 7.870370] calling packet_init+0x0/0x47 @ 1
[ 7.870374] NET: Registered protocol family 17
[ 7.870387] initcall packet_init+0x0/0x47 returned 0 after 11 usecs
[ 7.870392] calling br_init+0x0/0xad @ 1
[ 7.870418] initcall br_init+0x0/0xad returned 0 after 20 usecs
[ 7.870423] calling init_rpcsec_gss+0x0/0x4d @ 1
[ 7.870463] initcall init_rpcsec_gss+0x0/0x4d returned 0 after 33 usecs
[ 7.870468] calling init_kerberos_module+0x0/0x2f @ 1
[ 7.870480] initcall init_kerberos_module+0x0/0x2f returned 0 after 6 usecs
[ 7.870485] calling mce_debugfs_init+0x0/0x3c @ 1
[ 7.870516] initcall mce_debugfs_init+0x0/0x3c returned 0 after 25 usecs
[ 7.870520] calling severities_debugfs_init+0x0/0x3c @ 1
[ 7.870533] initcall severities_debugfs_init+0x0/0x3c returned 0 after 7 usecs
[ 7.870538] calling acpi_cpufreq_init+0x0/0x10d @ 1
[ 7.870568] initcall acpi_cpufreq_init+0x0/0x10d returned -19 after 25 usecs
[ 7.870573] calling hpet_insert_resource+0x0/0x23 @ 1
[ 7.870578] initcall hpet_insert_resource+0x0/0x23 returned 1 after 0 usecs
[ 7.870583] initcall hpet_insert_resource+0x0/0x23 returned with error code 1
[ 7.870588] calling update_mp_table+0x0/0x5f9 @ 1
[ 7.870594] initcall update_mp_table+0x0/0x5f9 returned 0 after 0 usecs
[ 7.870599] calling lapic_insert_resource+0x0/0x3f @ 1
[ 7.870604] initcall lapic_insert_resource+0x0/0x3f returned -1 after 0 usecs
[ 7.870609] initcall lapic_insert_resource+0x0/0x3f returned with error code -1
[ 7.870614] calling init_lapic_nmi_sysfs+0x0/0x39 @ 1
[ 7.870619] initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 0 usecs
[ 7.870624] calling io_apic_bug_finalize+0x0/0x1b @ 1
[ 7.870629] initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs
[ 7.870635] calling check_early_ioremap_leak+0x0/0x65 @ 1
[ 7.870640] initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs
[ 7.870645] calling pat_memtype_list_init+0x0/0x29 @ 1
[ 7.870659] initcall pat_memtype_list_init+0x0/0x29 returned 0 after 8 usecs
[ 7.870665] calling init_oops_id+0x0/0x31 @ 1
[ 7.870676] initcall init_oops_id+0x0/0x31 returned 0 after 6 usecs
[ 7.870682] calling disable_boot_consoles+0x0/0x45 @ 1
[ 7.870687] initcall disable_boot_consoles+0x0/0x45 returned 0 after 0 usecs
[ 7.870692] calling pm_qos_power_init+0x0/0xca @ 1
[ 7.871136] initcall pm_qos_power_init+0x0/0xca returned 0 after 427 usecs
[ 7.871143] calling software_resume+0x0/0x1fc @ 1
[ 7.871147] PM: Resume from disk failed.
[ 7.871152] initcall software_resume+0x0/0x1fc returned -2 after 3 usecs
[ 7.871158] initcall software_resume+0x0/0x1fc returned with error code -2
[ 7.871164] calling debugfs_kprobe_init+0x0/0x8a @ 1
[ 7.871192] initcall debugfs_kprobe_init+0x0/0x8a returned 0 after 23 usecs
[ 7.871198] calling taskstats_init+0x0/0x95 @ 1
[ 7.871209] registered taskstats version 1
[ 7.871214] initcall taskstats_init+0x0/0x95 returned 0 after 11 usecs
[ 7.871219] calling clear_boot_tracer+0x0/0x2d @ 1
[ 7.871224] initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs
[ 7.871229] calling max_swapfiles_check+0x0/0x8 @ 1
[ 7.871234] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
[ 7.871240] calling random32_reseed+0x0/0xb3 @ 1
[ 7.871262] initcall random32_reseed+0x0/0xb3 returned 0 after 17 usecs
[ 7.871267] calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
[ 7.871277] initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 4 usecs
[ 7.871282] calling pci_sysfs_init+0x0/0x51 @ 1
[ 7.872641] initcall pci_sysfs_init+0x0/0x51 returned 0 after 1322 usecs
[ 7.872647] calling boot_wait_for_devices+0x0/0x30 @ 1
[ 7.872655] initcall boot_wait_for_devices+0x0/0x30 returned 0 after 2 usecs
[ 7.872660] calling seqgen_init+0x0/0xf @ 1
[ 7.872683] initcall seqgen_init+0x0/0xf returned 0 after 17 usecs
[ 7.872690] calling late_resume_init+0x0/0x11f @ 1
[ 7.872694] Magic number: 11:422:599
[ 7.872736] serial8250 serial8250: hash matches
[ 7.872789] initcall late_resume_init+0x0/0x11f returned 0 after 90 usecs
[ 7.872795] calling scsi_complete_async_scans+0x0/0x167 @ 1
[ 7.872801] initcall scsi_complete_async_scans+0x0/0x167 returned 0 after 0 usecs
[ 7.872806] calling memmap_init+0x0/0xa3 @ 1
[ 7.872924] initcall memmap_init+0x0/0xa3 returned 0 after 110 usecs
[ 7.872929] calling pci_mmcfg_late_insert_resources+0x0/0x15f @ 1
[ 7.872938] initcall pci_mmcfg_late_insert_resources+0x0/0x15f returned 0 after 3 usecs
[ 7.872943] calling tcp_congestion_default+0x0/0x12 @ 1
[ 7.872949] initcall tcp_congestion_default+0x0/0x12 returned 0 after 1 usecs
[ 7.872954] calling ip_auto_config+0x0/0xd55 @ 1
[ 7.872966] initcall ip_auto_config+0x0/0xd55 returned 0 after 7 usecs
[ 7.872971] calling initialize_hashrnd+0x0/0x19 @ 1
[ 7.872982] initcall initialize_hashrnd+0x0/0x19 returned 0 after 6 usecs
[ 7.872993] async_waiting @ 1
[ 8.954100] usb usb7: suspend_rh (auto-stop)
[ 9.123828] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
[ 9.133794] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0004
[ 9.139686] scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H30L 1.06 PQ: 0 ANSI: 5
[ 9.140161] hub 2-0:1.0: state 7 ports 6 chg 0040 evt 0000
[ 9.140177] hub 2-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
[ 9.140190] ehci_hcd 0000:00:1d.7: port 6 low speed --> companion
[ 9.140220] usb usb7: wakeup_rh (auto-start)
[ 9.191097] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
[ 9.200146] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 9.206050] uhci_hcd 0000:00:1a.0: port 2 portsc 01a3,00
[ 9.211735] hub 3-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[ 9.302701] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 9.303629] Uniform CD-ROM driver Revision: 3.20
[ 9.316234] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 9.321540] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 9.327261] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[ 9.328428] initcall 5_async_port_probe+0x0/0xb3 returned 0 after 4611252 usecs
[ 9.328449] async_continuing @ 1 after 1421339 usec
[ 9.328697] Freeing unused kernel memory: 596k freed
[ 9.328910] Write protecting the kernel read-only data: 8652k
Loading, please wait...
mount: mounting none on /dev failed: No such device
[ 9.461118] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 9.652150] usb 3-2: skipped 1 descriptor after interface
[ 9.670981] usb 3-2: default language 0x0409
[ 9.741811] usb 3-2: udev 2, busnum 3, minor = 257
[ 9.746601] usb 3-2: New USB device found, idVendor=093a, idProduct=2510
[ 9.746601] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.746601] usb 3-2: Product: USB OPTICAL MOUSE
[ 9.746601] usb 3-2: Manufacturer: PIXART
[ 9.811383] usb 3-2: usb_probe_device
[ 9.813366] usb 3-2: configuration #1 chosen from 1 choice
[ 9.855124] usb 3-2: adding 3-2:1.0 (config #1, interface 0)
[ 9.861431] usbhid 3-2:1.0: usb_probe_interface
[ 9.866100] usbhid 3-2:1.0: usb_probe_interface - got id
[ 9.886712] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input3
[ 9.897593] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.0-2/input0
[ 9.902133] /root/Xen/xen-4.2-unstable/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002'
[ 9.920751] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 9.926603] uhci_hcd 0000:00:1d.2: port 2 portsc 01a3,00
[ 9.933074] hub 7-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[ 10.043109] hub 7-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[ 10.154109] usb 7-2: new low speed USB device using uhci_hcd and address 2
[ 10.315266] usb 7-2: skipped 1 descriptor after interface
[ 10.325256] usb 7-2: default language 0x0409
[ 10.349257] usb 7-2: udev 2, busnum 7, minor = 769
[ 10.350056] usb 7-2: New USB device found, idVendor=04b3, idProduct=3025
[ 10.350056] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.350056] usb 7-2: Product: USB NetVista Full Width Keyboard
[ 10.350056] usb 7-2: Manufacturer: CHICONY
[ 10.400874] usb 7-2: usb_probe_device
[ 10.401681] usb 7-2: configuration #1 chosen from 1 choice
[ 10.413267] usb 7-2: adding 7-2:1.0 (config #1, interface 0)
[ 10.414247] usbhid 7-2:1.0: usb_probe_interface
[ 10.414247] usbhid 7-2:1.0: usb_probe_interface - got id
[ 10.444740] input: CHICONY USB NetVista Full Width Keyboard as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input4
[ 10.445305] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 10.465218] generic-usb 0003:04B3:3025.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY USB NetVista Full Width Keyboard] on usb-0000:00:1d.2-2/input0
[ 10.480111] /root/Xen/xen-4.2-unstable/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002'
[ 10.490342] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 10.496199] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 10.502060] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0004
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs) [ 11.704133] hub 1-0:1.0: hub_suspend
[ 11.708029] usb usb1: bus auto-suspend
[ 11.709001] ehci_hcd 0000:00:1a.7: suspend root hub
[ 12.701109] hub 2-0:1.0: hub_suspend
[ 12.704995] usb usb2: bus auto-suspend
[ 12.705977] ehci_hcd 0000:00:1d.7: suspend root hub
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: pvops Domain 0 Creased when boot Xen-unstable on Ubuntu10.04
2011-05-17 14:39 ` Bei Guan
@ 2011-05-17 14:44 ` Konrad Rzeszutek Wilk
2011-05-17 15:27 ` Bei Guan
0 siblings, 1 reply; 14+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-05-17 14:44 UTC (permalink / raw)
To: Bei Guan; +Cc: Xen Devel, Andrei Warkentin
> menuentry "Ubuntu_Xen 4.2 (2.6.32.28)" {
> recordfail
> insmod ext2
> set root='(hd0,9)'
> search --no-floppy --fs-uuid --set 59c64afa-47a8-4a5f-a4cf-dbe3be20cc15
> multiboot /boot/xen.gz dom0_mem=1024M loglvl=all guest_loglvl=all
> sync_console console_to_ring com1=115200,8n1 console=com1 lapic=debug
> apic_verbosity=debug apic=debug iommu=off
> module /boot/vmlinuz-2.6.32.28 nopat
> root=UUID=59c64afa-47a8-4a5f-a4cf-dbe3be20cc15 ro console=tty0
> console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug
> debug loglevel=10
> module /boot/initrd.img-2.6.32.28
> }
>
> In the debug, there is message like this:
>
> Loading, please wait...
> mount: mounting none on /dev failed: No such device
So your /dev/sda is being seen. Not sure why the UUID hasn't been read, but
you could do 'root=/dev/sdaX' where X is the correct root partition.
This would replace the 'UUID=59...'.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: pvops Domain 0 Creased when boot Xen-unstable on Ubuntu10.04
2011-05-17 14:44 ` Konrad Rzeszutek Wilk
@ 2011-05-17 15:27 ` Bei Guan
2011-05-17 15:34 ` Ian Campbell
0 siblings, 1 reply; 14+ messages in thread
From: Bei Guan @ 2011-05-17 15:27 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: Xen Devel, Andrei Warkentin
[-- Attachment #1.1: Type: text/plain, Size: 1722 bytes --]
2011/5/17 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> > menuentry "Ubuntu_Xen 4.2 (2.6.32.28)" {
> > recordfail
> > insmod ext2
> > set root='(hd0,9)'
> > search --no-floppy --fs-uuid --set 59c64afa-47a8-4a5f-a4cf-dbe3be20cc15
> > multiboot /boot/xen.gz dom0_mem=1024M loglvl=all guest_loglvl=all
> > sync_console console_to_ring com1=115200,8n1 console=com1 lapic=debug
> > apic_verbosity=debug apic=debug iommu=off
> > module /boot/vmlinuz-2.6.32.28 nopat
> > root=UUID=59c64afa-47a8-4a5f-a4cf-dbe3be20cc15 ro console=tty0
> > console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset
> initcall_debug
> > debug loglevel=10
> > module /boot/initrd.img-2.6.32.28
> > }
> >
> > In the debug, there is message like this:
> >
> > Loading, please wait...
> > mount: mounting none on /dev failed: No such device
>
>
> So your /dev/sda is being seen. Not sure why the UUID hasn't been read, but
> you could do 'root=/dev/sdaX' where X is the correct root partition.
>
> This would replace the 'UUID=59...'.
>
I just tried this. Because the /dev/sda9 is the root fs, so I used
'root=/dev/sda9' to replace the original one. But it also the same error as
the following. Detailed is also attached.
Loading, please wait...
mount: mounting none on /dev failed: No such device
The fs in my pc.
root@gavinguan-desktop:~# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda9 31G 14G 16G 47% /
none 1.9G 288K 1.9G 1% /dev
none 1.9G 24K 1.9G 1% /dev/shm
none 1.9G 92K 1.9G 1% /var/run
none 1.9G 0 1.9G 0% /var/lock
none 1.9G 0 1.9G 0% /lib/init/rw
Thanks,
Bei Guan
[-- Attachment #1.2: Type: text/html, Size: 2401 bytes --]
[-- Attachment #2: boot_log_2.txt --]
[-- Type: text/plain, Size: 168132 bytes --]
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.05.17 23:18:01 =~=~=~=~=~=~=~=~=~=~=~=
__ __ _ _ ____ _ _ _
\ \/ /___ _ __ | || | |___ \ _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ | || |_ __) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | |__ _| / __/|__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |_|(_)_____| \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 4.2-unstable (root@) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) Tue May 17 18:59:04 HKT 2011
(XEN) Latest ChangeSet: Thu May 12 16:42:54 2011 +0100 23339:f9bb0bbea7c2
(XEN) Console output is synchronous.
(XEN) Bootloader: GRUB 1.98-1ubuntu12
(XEN) Command line: dom0_mem=1024M loglvl=all guest_loglvl=all sync_console console_to_ring com1=115200,8n1 console=com1 lapic=debug apic_verbosity=debug apic=debug iommu=off
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009dc00 (usable)
(XEN) 000000000009dc00 - 00000000000a0000 (reserved)
(XEN) 00000000000d2000 - 00000000000d4000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bfeb0000 (usable)
(XEN) 00000000bfeb0000 - 00000000bfecb000 (ACPI data)
(XEN) 00000000bfecb000 - 00000000bfece000 (ACPI NVS)
(XEN) 00000000bfece000 - 00000000c0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec10000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000134000000 (usable)
(XEN) ACPI: RSDP 000F61B0, 0014 (r0 PTLTD )
(XEN) ACPI: RSDT BFEC103B, 0048 (r1 LENOVO TC-2J 37 LTP 0)
(XEN) ACPI: FACP BFECAE2B, 0074 (r1 LENOVO TC-2J 37 PTL 1)
(XEN) ACPI: DSDT BFEC42E4, 6B47 (r1 LENOVO TC-2J 37 MSFT 100000E)
(XEN) ACPI: FACS BFECDFC0, 0040
(XEN) ACPI: TCPA BFECAE9F, 0032 (r2 LENOVO TC-2J 37 PTL 0)
(XEN) ACPI: ASF! BFECAED1, 0063 (r16 CETP 2JETP 37 PTL 1)
(XEN) ACPI: MCFG BFECAF34, 003C (r1 PTLTD M2JG 37 LTP 0)
(XEN) ACPI: APIC BFECAF70, 0068 (r1 PTLTD A2JC 37 LTP 0)
(XEN) ACPI: BOOT BFECAFD8, 0028 (r1 PTLTD $SB2JBL$ 37 LTP 1)
(XEN) ACPI: SSDT BFEC252E, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050228)
(XEN) ACPI: SSDT BFEC2488, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050228)
(XEN) ACPI: SSDT BFEC1083, 1405 (r1 PmRef CpuPm 3000 INTL 20050228)
(XEN) System RAM: 3902MB (3995956kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000134000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f6300
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x1008
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[fe10,0], pm1x_evt[1000,0]
(XEN) ACPI: wakeup_vec[bfecdfcc], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 6:15 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 9
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) Table is not found!
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) mapped APIC to ffff82c3ffefe000 (fee00000)
(XEN) mapped IOAPIC to ffff82c3ffefd000 (fec00000)
(XEN) IRQ limits: 24 GSI, 376 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 1862.032 MHz processor.
(XEN) Initing memory sharing.
(XEN) mce_intel.c:1206: MCA Capability: BCAST 1 SER 0 CMCI 0 firstbank 1 extended MCE MSR 0
(XEN) CPU0: Thermal monitoring handled by SMI
(XEN) Intel machine check reporting enabled
(XEN) ..... CPU clock speed is 1862.0408 MHz.
(XEN) ..... host bus clock speed is 266.0056 MHz.
(XEN) ..... bus_scale = 0x00011069
(XEN) Platform timer is 3.579MHz ACPI PM Timer
ÿ(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC TPR shadow
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs disabled.
(XEN) HVM: VMX enabled
(XEN) masked ExtINT on CPU#1
(XEN) Brought up 2 CPUs
(XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'.
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x874000
(XEN) elf_parse_binary: phdr: paddr=0x1874000 memsz=0xcc498
(XEN) elf_parse_binary: phdr: paddr=0x1941000 memsz=0x888
(XEN) elf_parse_binary: phdr: paddr=0x1942000 memsz=0x159d8
(XEN) elf_parse_binary: phdr: paddr=0x1958000 memsz=0x28b000
(XEN) elf_parse_binary: memory: 0x1000000 -> 0x1be3000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff81958200
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
(XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xffffffff80000000
(XEN) elf_paddr_offset = 0x0
(XEN) virt_offset = 0xffffffff80000000
(XEN) virt_kstart = 0xffffffff81000000
(XEN) virt_kend = 0xffffffff81be3000
(XEN) virt_entry = 0xffffffff81958200
(XEN) p2m_base = 0xffffffffffffffff
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1be3000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000128000000->000000012c000000 (243826 pages to be allocated)
(XEN) Init. ramdisk: 0000000133872000->0000000133fffe00
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81be3000
(XEN) Init. ramdisk: ffffffff81be3000->ffffffff82370e00
(XEN) Phys-Mach map: ffffffff82371000->ffffffff82571000
(XEN) Start info: ffffffff82571000->ffffffff825714b4
(XEN) Page tables: ffffffff82572000->ffffffff82589000
(XEN) Boot stack: ffffffff82589000->ffffffff8258a000
(XEN) TOTAL: ffffffff80000000->ffffffff82800000
(XEN) ENTRY ADDRESS: ffffffff81958200
(XEN) Dom0 has maximum 2 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81874000
(XEN) elf_load_binary: phdr 1 at 0xffffffff81874000 -> 0xffffffff81940498
(XEN) elf_load_binary: phdr 2 at 0xffffffff81941000 -> 0xffffffff81941888
(XEN) elf_load_binary: phdr 3 at 0xffffffff81942000 -> 0xffffffff819579d8
(XEN) elf_load_binary: phdr 4 at 0xffffffff81958000 -> 0xffffffff819e3000
(XEN) Scrubbing Free RAM: ............................done.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 232kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.28 (root@gavinguan-desktop) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Tue May 17 22:17:12 HKT 2011
[ 0.000000] Command line: nopat root=/dev/sda9 ro console=tty0 console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] Xen: 000000000009dc00 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] Xen: 00000000bfeb0000 - 00000000bfecb000 (ACPI data)
[ 0.000000] Xen: 00000000bfecb000 - 00000000bfece000 (ACPI NVS)
[ 0.000000] Xen: 00000000bfece000 - 00000000c0000000 (reserved)
[ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 00000001b3eb0000 (usable)
[ 0.000000] PAT support disabled.
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x1b3eb0 max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009d000 (usable)
[ 0.000000] modified: 000000000009dc00 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] modified: 00000000bfeb0000 - 00000000bfecb000 (ACPI data)
[ 0.000000] modified: 00000000bfecb000 - 00000000bfece000 (ACPI NVS)
[ 0.000000] modified: 00000000bfece000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 00000001b3eb0000 (usable)
[ 0.000000] initial memory mapped : 0 - 02fff000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000
[ 0.000000] 0000000000 - 0040000000 page 4k
[ 0.000000] kernel direct mapping tables up to 40000000 @ 100000-302000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001b3eb0000
[ 0.000000] 0100000000 - 01b3eb0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1b3eb0000 @ 2589000-3331000
[ 0.000000] RAMDISK: 01be3000 - 02370e00
[ 0.000000] ACPI: RSDP 00000000000f61b0 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 00000000bfec103b 00048 (v01 LENOVO TC-2J 00000037 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bfecae2b 00074 (v01 LENOVO TC-2J 00000037 PTL 00000001)
[ 0.000000] ACPI: DSDT 00000000bfec42e4 06B47 (v01 LENOVO TC-2J 00000037 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000bfecdfc0 00040
[ 0.000000] ACPI: TCPA 00000000bfecae9f 00032 (v02 LENOVO TC-2J 00000037 PTL 00000000)
[ 0.000000] ACPI: ASF! 00000000bfecaed1 00063 (v16 CETP 2JETP 00000037 PTL 00000001)
[ 0.000000] ACPI: MCFG 00000000bfecaf34 0003C (v01 PTLTD M2JG 00000037 LTP 00000000)
[ 0.000000] ACPI: APIC 00000000bfecaf70 00068 (v01 PTLTD ? A2JC 00000037 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfecafd8 00028 (v01 PTLTD $SB2JBL$ 00000037 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfec252e 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000bfec2488 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000bfec1083 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 01b3eb0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0002572000 - 0002589000] XEN PAGETABLES ==> [0002572000 - 0002589000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001ab8054] TEXT DATA BSS ==> [0001000000 - 0001ab8054]
[ 0.000000] #4 [0001be3000 - 0002370e00] RAMDISK ==> [0001be3000 - 0002370e00]
[ 0.000000] #5 [0002371000 - 0002572000] XEN START INFO ==> [0002371000 - 0002572000]
[ 0.000000] #6 [0100000000 - 01b3eb0000] XEN EXTRA ==> [0100000000 - 01b3eb0000]
[ 0.000000] #7 [0001ab9000 - 0001ac5100] BRK ==> [0001ab9000 - 0001ac5100]
[ 0.000000] #8 [0000100000 - 00002e8000] PGTABLE ==> [0000100000 - 00002e8000]
[ 0.000000] #9 [0002589000 - 0002b2c000] PGTABLE ==> [0002589000 - 0002b2c000]
[ 0.000000] found SMP MP-table at [ffff8800000f6300] f6300
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001b3eb0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00040000
[ 0.000000] 0: 0x00100000 -> 0x001b3eb0
[ 0.000000] On node 0 totalpages: 998984
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 491 pages reserved
[ 0.000000] DMA zone: 3445 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 243768 pages, LIFO batch:31
[ 0.000000] Normal zone: 10076 pages used for memmap
[ 0.000000] Normal zone: 726868 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 256
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 00000000bfeb0000
[ 0.000000] PM: Registered nosave memory: 00000000bfeb0000 - 00000000bfecb000
[ 0.000000] PM: Registered nosave memory: 00000000bfecb000 - 00000000bfece000
[ 0.000000] PM: Registered nosave memory: 00000000bfece000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:7feb0000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.2-unstable (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88002804f000 s88536 r8192 d22056 u118784
[ 0.000000] pcpu-alloc: s88536 r8192 d22056 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 974081
[ 0.000000] Kernel command line: nopat root=/dev/sda9 ro console=tty0 console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] DMA: software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ffff880024060000 size=32768
[ 0.000000] Memory: 890524k/7142080k available (5805k kernel code, 3146144k absent, 3104676k reserved, 3668k data, 596k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:768
[ 0.000000] xen: --> irq=0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen: --> irq=2
[ 0.000000] xen: --> irq=3
[ 0.000000] xen: --> irq=4
[ 0.000000] xen: --> irq=5
[ 0.000000] xen: --> irq=6
[ 0.000000] xen: --> irq=7
[ 0.000000] xen: --> irq=8
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: --> irq=10
[ 0.000000] xen: --> irq=11
[ 0.000000] xen: --> irq=12
[ 0.000000] xen: --> irq=13
[ 0.000000] xen: --> irq=14
[ 0.000000] xen: --> irq=15
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 0
[ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[ 0.000000] xen: --> irq=9
(XEN) IOAPIC[0]: Set PCI routing entry (2-9 -> 0x58 -> IRQ 9 Mode:1 Active:0)
[ 0.000000] xen: acpi sci 9
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.28 (root@gavinguan-desktop) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Tue May 17 22:17:12 HKT 2011
[ 0.000000] Command line: nopat root=/dev/sda9 ro console=tty0 console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] Xen: 000000000009dc00 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] Xen: 00000000bfeb0000 - 00000000bfecb000 (ACPI data)
[ 0.000000] Xen: 00000000bfecb000 - 00000000bfece000 (ACPI NVS)
[ 0.000000] Xen: 00000000bfece000 - 00000000c0000000 (reserved)
[ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 00000001b3eb0000 (usable)
[ 0.000000] PAT support disabled.
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x1b3eb0 max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009d000 (usable)
[ 0.000000] modified: 000000000009dc00 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] modified: 00000000bfeb0000 - 00000000bfecb000 (ACPI data)
[ 0.000000] modified: 00000000bfecb000 - 00000000bfece000 (ACPI NVS)
[ 0.000000] modified: 00000000bfece000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 00000001b3eb0000 (usable)
[ 0.000000] initial memory mapped : 0 - 02fff000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000
[ 0.000000] 0000000000 - 0040000000 page 4k
[ 0.000000] kernel direct mapping tables up to 40000000 @ 100000-302000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001b3eb0000
[ 0.000000] 0100000000 - 01b3eb0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1b3eb0000 @ 2589000-3331000
[ 0.000000] RAMDISK: 01be3000 - 02370e00
[ 0.000000] ACPI: RSDP 00000000000f61b0 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 00000000bfec103b 00048 (v01 LENOVO TC-2J 00000037 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bfecae2b 00074 (v01 LENOVO TC-2J 00000037 PTL 00000001)
[ 0.000000] ACPI: DSDT 00000000bfec42e4 06B47 (v01 LENOVO TC-2J 00000037 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000bfecdfc0 00040
[ 0.000000] ACPI: TCPA 00000000bfecae9f 00032 (v02 LENOVO TC-2J 00000037 PTL 00000000)
[ 0.000000] ACPI: ASF! 00000000bfecaed1 00063 (v16 CETP 2JETP 00000037 PTL 00000001)
[ 0.000000] ACPI: MCFG 00000000bfecaf34 0003C (v01 PTLTD M2JG 00000037 LTP 00000000)
[ 0.000000] ACPI: APIC 00000000bfecaf70 00068 (v01 PTLTD ? A2JC 00000037 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfecafd8 00028 (v01 PTLTD $SB2JBL$ 00000037 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfec252e 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000bfec2488 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000bfec1083 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 01b3eb0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0002572000 - 0002589000] XEN PAGETABLES ==> [0002572000 - 0002589000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001ab8054] TEXT DATA BSS ==> [0001000000 - 0001ab8054]
[ 0.000000] #4 [0001be3000 - 0002370e00] RAMDISK ==> [0001be3000 - 0002370e00]
[ 0.000000] #5 [0002371000 - 0002572000] XEN START INFO ==> [0002371000 - 0002572000]
[ 0.000000] #6 [0100000000 - 01b3eb0000] XEN EXTRA ==> [0100000000 - 01b3eb0000]
[ 0.000000] #7 [0001ab9000 - 0001ac5100] BRK ==> [0001ab9000 - 0001ac5100]
[ 0.000000] #8 [0000100000 - 00002e8000] PGTABLE ==> [0000100000 - 00002e8000]
[ 0.000000] #9 [0002589000 - 0002b2c000] PGTABLE ==> [0002589000 - 0002b2c000]
[ 0.000000] found SMP MP-table at [ffff8800000f6300] f6300
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001b3eb0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00040000
[ 0.000000] 0: 0x00100000 -> 0x001b3eb0
[ 0.000000] On node 0 totalpages: 998984
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 491 pages reserved
[ 0.000000] DMA zone: 3445 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 243768 pages, LIFO batch:31
[ 0.000000] Normal zone: 10076 pages used for memmap
[ 0.000000] Normal zone: 726868 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 256
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 00000000bfeb0000
[ 0.000000] PM: Registered nosave memory: 00000000bfeb0000 - 00000000bfecb000
[ 0.000000] PM: Registered nosave memory: 00000000bfecb000 - 00000000bfece000
[ 0.000000] PM: Registered nosave memory: 00000000bfece000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:7feb0000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.2-unstable (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88002804f000 s88536 r8192 d22056 u118784
[ 0.000000] pcpu-alloc: s88536 r8192 d22056 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 974081
[ 0.000000] Kernel command line: nopat root=/dev/sda9 ro console=tty0 console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] DMA: software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ffff880024060000 size=32768
[ 0.000000] Memory: 890524k/7142080k available (5805k kernel code, 3146144k absent, 3104676k reserved, 3668k data, 596k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:768
[ 0.000000] xen: --> irq=0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen: --> irq=2
[ 0.000000] xen: --> irq=3
[ 0.000000] xen: --> irq=4
[ 0.000000] xen: --> irq=5
[ 0.000000] xen: --> irq=6
[ 0.000000] xen: --> irq=7
[ 0.000000] xen: --> irq=8
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: --> irq=10
[ 0.000000] xen: --> irq=11
[ 0.000000] xen: --> irq=12
[ 0.000000] xen: --> irq=13
[ 0.000000] xen: --> irq=14
[ 0.000000] xen: --> irq=15
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 0
[ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: acpi sci 9
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.28 (root@gavinguan-desktop) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Tue May 17 22:17:12 HKT 2011
[ 0.000000] Command line: nopat root=/dev/sda9 ro console=tty0 console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] Xen: 000000000009dc00 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] Xen: 00000000bfeb0000 - 00000000bfecb000 (ACPI data)
[ 0.000000] Xen: 00000000bfecb000 - 00000000bfece000 (ACPI NVS)
[ 0.000000] Xen: 00000000bfece000 - 00000000c0000000 (reserved)
[ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 00000001b3eb0000 (usable)
[ 0.000000] PAT support disabled.
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x1b3eb0 max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009d000 (usable)
[ 0.000000] modified: 000000000009dc00 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] modified: 00000000bfeb0000 - 00000000bfecb000 (ACPI data)
[ 0.000000] modified: 00000000bfecb000 - 00000000bfece000 (ACPI NVS)
[ 0.000000] modified: 00000000bfece000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 00000001b3eb0000 (usable)
[ 0.000000] initial memory mapped : 0 - 02fff000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000
[ 0.000000] 0000000000 - 0040000000 page 4k
[ 0.000000] kernel direct mapping tables up to 40000000 @ 100000-302000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001b3eb0000
[ 0.000000] 0100000000 - 01b3eb0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1b3eb0000 @ 2589000-3331000
[ 0.000000] RAMDISK: 01be3000 - 02370e00
[ 0.000000] ACPI: RSDP 00000000000f61b0 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 00000000bfec103b 00048 (v01 LENOVO TC-2J 00000037 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bfecae2b 00074 (v01 LENOVO TC-2J 00000037 PTL 00000001)
[ 0.000000] ACPI: DSDT 00000000bfec42e4 06B47 (v01 LENOVO TC-2J 00000037 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000bfecdfc0 00040
[ 0.000000] ACPI: TCPA 00000000bfecae9f 00032 (v02 LENOVO TC-2J 00000037 PTL 00000000)
[ 0.000000] ACPI: ASF! 00000000bfecaed1 00063 (v16 CETP 2JETP 00000037 PTL 00000001)
[ 0.000000] ACPI: MCFG 00000000bfecaf34 0003C (v01 PTLTD M2JG 00000037 LTP 00000000)
[ 0.000000] ACPI: APIC 00000000bfecaf70 00068 (v01 PTLTD ? A2JC 00000037 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfecafd8 00028 (v01 PTLTD $SB2JBL$ 00000037 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfec252e 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000bfec2488 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000bfec1083 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 01b3eb0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0002572000 - 0002589000] XEN PAGETABLES ==> [0002572000 - 0002589000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001ab8054] TEXT DATA BSS ==> [0001000000 - 0001ab8054]
[ 0.000000] #4 [0001be3000 - 0002370e00] RAMDISK ==> [0001be3000 - 0002370e00]
[ 0.000000] #5 [0002371000 - 0002572000] XEN START INFO ==> [0002371000 - 0002572000]
[ 0.000000] #6 [0100000000 - 01b3eb0000] XEN EXTRA ==> [0100000000 - 01b3eb0000]
[ 0.000000] #7 [0001ab9000 - 0001ac5100] BRK ==> [0001ab9000 - 0001ac5100]
[ 0.000000] #8 [0000100000 - 00002e8000] PGTABLE ==> [0000100000 - 00002e8000]
[ 0.000000] #9 [0002589000 - 0002b2c000] PGTABLE ==> [0002589000 - 0002b2c000]
[ 0.000000] found SMP MP-table at [ffff8800000f6300] f6300
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001b3eb0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00040000
[ 0.000000] 0: 0x00100000 -> 0x001b3eb0
[ 0.000000] On node 0 totalpages: 998984
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 491 pages reserved
[ 0.000000] DMA zone: 3445 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 243768 pages, LIFO batch:31
[ 0.000000] Normal zone: 10076 pages used for memmap
[ 0.000000] Normal zone: 726868 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 256
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 00000000bfeb0000
[ 0.000000] PM: Registered nosave memory: 00000000bfeb0000 - 00000000bfecb000
[ 0.000000] PM: Registered nosave memory: 00000000bfecb000 - 00000000bfece000
[ 0.000000] PM: Registered nosave memory: 00000000bfece000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:7feb0000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.2-unstable (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88002804f000 s88536 r8192 d22056 u118784
[ 0.000000] pcpu-alloc: s88536 r8192 d22056 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 974081
[ 0.000000] Kernel command line: nopat root=/dev/sda9 ro console=tty0 console=ttyS0,115200n8 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] DMA: software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ffff880024060000 size=32768
[ 0.000000] Memory: 890524k/7142080k available (5805k kernel code, 3146144k absent, 3104676k reserved, 3668k data, 596k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:768
[ 0.000000] xen: --> irq=0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen: --> irq=2
[ 0.000000] xen: --> irq=3
[ 0.000000] xen: --> irq=4
[ 0.000000] xen: --> irq=5
[ 0.000000] xen: --> irq=6
[ 0.000000] xen: --> irq=7
[ 0.000000] xen: --> irq=8
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: --> irq=10
[ 0.000000] xen: --> irq=11
[ 0.000000] xen: --> irq=12
[ 0.000000] xen: --> irq=13
[ 0.000000] xen: --> irq=14
[ 0.000000] xen: --> irq=15
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 0
[ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: acpi sci 9
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] alloc irq_desc for 767 on node -1
[ 0.000000] alloc kstat_irqs on node -1
[ 0.000000] Detected 1862.032 MHz processor.
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.06 BogoMIPS (lpj=1862032)
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Initializing.
[ 0.000999] SELinux: Starting in permissive mode
[ 0.000999] Mount-cache hash table entries: 256
[ 0.001337] Initializing cgroup subsys ns
[ 0.001999] Initializing cgroup subsys cpuacct
[ 0.001999] Initializing cgroup subsys freezer
[ 0.002037] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.002999] CPU: L2 cache: 2048K
[ 0.003010] CPU: Physical Processor ID: 0
[ 0.003999] CPU: Processor Core ID: 0
[ 0.004009] mce: CPU supports 6 MCE banks
[ 0.005025] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only.
[ 0.005999] SMP alternatives: switching to UP code
[ 0.005999] ACPI: Core revision 20090903
[ 0.021273] alloc irq_desc for 766 on node -1
[ 0.021996] alloc kstat_irqs on node -1
[ 0.022009] cpu 0 spinlock event irq 766
[ 0.022996] alloc irq_desc for 765 on node -1
[ 0.022996] alloc kstat_irqs on node -1
[ 0.023007] alloc irq_desc for 764 on node -1
[ 0.023996] alloc kstat_irqs on node -1
[ 0.024007] alloc irq_desc for 763 on node -1
[ 0.024996] alloc kstat_irqs on node -1
[ 0.025009] alloc irq_desc for 762 on node -1
[ 0.025996] alloc kstat_irqs on node -1
[ 0.026026] calling migration_init+0x0/0x59 @ 1
[ 0.027060] initcall migration_init+0x0/0x59 returned 0 after 976 usecs
[ 0.027995] calling spawn_ksoftirqd+0x0/0x59 @ 1
[ 0.028041] initcall spawn_ksoftirqd+0x0/0x59 returned 0 after 976 usecs
[ 0.028995] calling init_call_single_data+0x0/0x89 @ 1
[ 0.028995] initcall init_call_single_data+0x0/0x89 returned 0 after 0 usecs
[ 0.028995] calling relay_init+0x0/0x14 @ 1
[ 0.028995] initcall relay_init+0x0/0x14 returned 0 after 0 usecs
[ 0.028995] calling tracer_alloc_buffers+0x0/0x173 @ 1
[ 0.028995] initcall tracer_alloc_buffers+0x0/0x173 returned 0 after 0 usecs
[ 0.028995] calling init_trace_printk+0x0/0x12 @ 1
[ 0.028995] initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs
[ 0.028995] calling mce_amd_init+0x0/0x33 @ 1
[ 0.028995] initcall mce_amd_init+0x0/0x33 returned 0 after 0 usecs
[ 0.029096] installing Xen timer for CPU 1
[ 0.029995] alloc irq_desc for 761 on node -1
[ 0.029995] alloc kstat_irqs on node -1
[ 0.030009] alloc irq_desc for 760 on node -1
[ 0.030995] alloc kstat_irqs on node -1
[ 0.031006] cpu 1 spinlock event irq 760
[ 0.032028] SMP alternatives: switching to SMP code
[ 0.032994] alloc irq_desc for 759 on node -1
[ 0.032994] alloc kstat_irqs on node -1
[ 0.033008] alloc irq_desc for 758 on node -1
[ 0.033994] alloc kstat_irqs on node -1
[ 0.034007] alloc irq_desc for 757 on node -1
[ 0.034994] alloc kstat_irqs on node -1
[ 0.035007] alloc irq_desc for 756 on node -1
[ 0.035994] alloc kstat_irqs on node -1
[ 0.000999] Initializing CPU#1
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 2048K
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.036146] Brought up 2 CPUs
[ 0.044467] calling init_mmap_min_addr+0x0/0x26 @ 1
[ 0.044993] initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs
[ 0.044993] calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
[ 0.044993] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
[ 0.044993] calling net_ns_init+0x0/0xed @ 1
[ 0.045036] initcall net_ns_init+0x0/0xed returned 0 after 976 usecs
[ 0.045993] calling e820_mark_nvs_memory+0x0/0x40 @ 1
[ 0.045993] initcall e820_mark_nvs_memory+0x0/0x40 returned 0 after 0 usecs
[ 0.045993] calling cpufreq_tsc+0x0/0x28 @ 1
[ 0.045993] initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs
[ 0.045993] calling pci_reboot_init+0x0/0x14 @ 1
[ 0.045993] initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs
[ 0.045993] calling init_lapic_sysfs+0x0/0x2d @ 1
[ 0.046361] initcall init_lapic_sysfs+0x0/0x2d returned 0 after 976 usecs
[ 0.046992] calling alloc_frozen_cpus+0x0/0x8 @ 1
[ 0.046992] initcall alloc_frozen_cpus+0x0/0x8 returned 0 after 0 usecs
[ 0.046992] calling sysctl_init+0x0/0x32 @ 1
[ 0.046992] initcall sysctl_init+0x0/0x32 returned 0 after 0 usecs
[ 0.046992] calling ksysfs_init+0x0/0xc0 @ 1
[ 0.046992] initcall ksysfs_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.046992] calling async_init+0x0/0x60 @ 1
[ 0.047033] initcall async_init+0x0/0x60 returned 0 after 976 usecs
[ 0.047992] calling init_jiffies_clocksource+0x0/0x12 @ 1
[ 0.047992] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs
[ 0.047992] calling pm_init+0x0/0x34 @ 1
[ 0.047992] initcall pm_init+0x0/0x34 returned 0 after 0 usecs
[ 0.047992] calling pm_disk_init+0x0/0x19 @ 1
[ 0.047992] initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs
[ 0.047992] calling swsusp_header_init+0x0/0x2c @ 1
[ 0.047992] initcall swsusp_header_init+0x0/0x2c returned 0 after 0 usecs
[ 0.047992] calling init_zero_pfn+0x0/0x68 @ 1
[ 0.047992] initcall init_zero_pfn+0x0/0x68 returned 0 after 0 usecs
[ 0.047992] calling filelock_init+0x0/0x2e @ 1
[ 0.047992] initcall filelock_init+0x0/0x2e returned 0 after 0 usecs
[ 0.047992] calling init_misc_binfmt+0x0/0x44 @ 1
[ 0.047992] initcall init_misc_binfmt+0x0/0x44 returned 0 after 0 usecs
[ 0.047992] calling init_script_binfmt+0x0/0x14 @ 1
[ 0.047992] initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs
[ 0.047992] calling init_elf_binfmt+0x0/0x14 @ 1
[ 0.047992] initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
[ 0.047992] calling init_compat_elf_binfmt+0x0/0x14 @ 1
[ 0.047992] initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
[ 0.047992] calling debugfs_init+0x0/0x5c @ 1
[ 0.047992] initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs
[ 0.047992] calling random32_init+0x0/0xd8 @ 1
[ 0.047992] initcall random32_init+0x0/0xd8 returned 0 after 0 usecs
[ 0.047992] calling __gnttab_init+0x0/0x21 @ 1
[ 0.048060] Grant table initialized
[ 0.048992] initcall __gnttab_init+0x0/0x21 returned 0 after 976 usecs
[ 0.048992] calling early_resume_init+0x0/0x19e @ 1
[ 0.048992] Time: 23:18:48 Date: 05/17/11
[ 0.048992] initcall early_resume_init+0x0/0x19e returned 0 after 0 usecs
[ 0.048992] calling cpufreq_core_init+0x0/0x9b @ 1
[ 0.048992] initcall cpufreq_core_init+0x0/0x9b returned 0 after 0 usecs
[ 0.048992] calling cpuidle_init+0x0/0x40 @ 1
[ 0.049012] initcall cpuidle_init+0x0/0x40 returned 0 after 976 usecs
[ 0.049992] calling sock_init+0x0/0x5e @ 1
[ 0.050069] initcall sock_init+0x0/0x5e returned 0 after 976 usecs
[ 0.050992] calling net_inuse_init+0x0/0x26 @ 1
[ 0.050992] initcall net_inuse_init+0x0/0x26 returned 0 after 0 usecs
[ 0.050992] calling netpoll_init+0x0/0x31 @ 1
[ 0.050992] initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs
[ 0.050992] calling netlink_proto_init+0x0/0x143 @ 1
[ 0.050992] NET: Registered protocol family 16
[ 0.051006] initcall netlink_proto_init+0x0/0x143 returned 0 after 976 usecs
[ 0.051992] calling bdi_class_init+0x0/0x41 @ 1
[ 0.052088] initcall bdi_class_init+0x0/0x41 returned 0 after 976 usecs
[ 0.052991] calling kobject_uevent_init+0x0/0x54 @ 1
[ 0.053067] initcall kobject_uevent_init+0x0/0x54 returned 0 after 976 usecs
[ 0.053991] calling pcibus_class_init+0x0/0x19 @ 1
[ 0.054056] initcall pcibus_class_init+0x0/0x19 returned 0 after 976 usecs
[ 0.054991] calling pci_driver_init+0x0/0x12 @ 1
[ 0.055024] initcall pci_driver_init+0x0/0x12 returned 0 after 976 usecs
[ 0.055991] calling backlight_class_init+0x0/0x5d @ 1
[ 0.056055] initcall backlight_class_init+0x0/0x5d returned 0 after 976 usecs
[ 0.056991] calling video_output_class_init+0x0/0x19 @ 1
[ 0.057026] initcall video_output_class_init+0x0/0x19 returned 0 after 976 usecs
[ 0.057991] calling xenbus_init+0x0/0x2b6 @ 1
[ 0.058006] alloc irq_desc for 755 on node -1
[ 0.058991] alloc kstat_irqs on node -1
[ 0.059046] initcall xenbus_init+0x0/0x2b6 returned 0 after 1952 usecs
[ 0.059990] calling tty_class_init+0x0/0x38 @ 1
[ 0.060055] initcall tty_class_init+0x0/0x38 returned 0 after 976 usecs
[ 0.060990] calling vtconsole_class_init+0x0/0xc2 @ 1
[ 0.061102] initcall vtconsole_class_init+0x0/0xc2 returned 0 after 976 usecs
[ 0.061990] calling i2c_init+0x0/0x6a @ 1
[ 0.062054] initcall i2c_init+0x0/0x6a returned 0 after 976 usecs
[ 0.062990] calling amd_postcore_init+0x0/0x77 @ 1
[ 0.062990] initcall amd_postcore_init+0x0/0x77 returned 0 after 0 usecs
[ 0.062990] calling arch_kdebugfs_init+0x0/0x235 @ 1
[ 0.062990] initcall arch_kdebugfs_init+0x0/0x235 returned 0 after 0 usecs
[ 0.062990] calling mtrr_if_init+0x0/0x61 @ 1
[ 0.062990] initcall mtrr_if_init+0x0/0x61 returned 0 after 0 usecs
[ 0.062990] calling ffh_cstate_init+0x0/0x2a @ 1
[ 0.062990] initcall ffh_cstate_init+0x0/0x2a returned 0 after 0 usecs
[ 0.062990] calling acpi_pci_init+0x0/0x57 @ 1
[ 0.062990] ACPI: bus type pci registered
[ 0.062990] initcall acpi_pci_init+0x0/0x57 returned 0 after 0 usecs
[ 0.062990] calling xen_pcpu_init+0x0/0xa8 @ 1
[ 0.063082] sync cpu 0 get result 1 max_id 1
[ 0.064057] sync cpu 1 get result 1 max_id 1
[ 0.064990] alloc irq_desc for 754 on node -1
[ 0.064990] alloc kstat_irqs on node -1
[ 0.065023] initcall xen_pcpu_init+0x0/0xa8 returned 754 after 2929 usecs
[ 0.065989] initcall xen_pcpu_init+0x0/0xa8 returned with error code 754
[ 0.065989] calling register_xen_pci_notifier+0x0/0x24 @ 1
[ 0.065989] initcall register_xen_pci_notifier+0x0/0x24 returned 0 after 0 usecs
[ 0.065989] calling setup_vcpu_hotplug_event+0x0/0x22 @ 1
[ 0.065989] initcall setup_vcpu_hotplug_event+0x0/0x22 returned 0 after 0 usecs
[ 0.065989] calling dmi_id_init+0x0/0x319 @ 1
[ 0.066096] initcall dmi_id_init+0x0/0x319 returned 0 after 976 usecs
[ 0.066989] calling pci_arch_init+0x0/0x60 @ 1
[ 0.067026] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 9
[ 0.067989] PCI: MCFG area at e0000000 reserved in E820
[ 0.069420] PCI: Using MMCONFIG at e0000000 - e09fffff
[ 0.069989] PCI: Using configuration type 1 for base access
[ 0.069989] initcall pci_arch_init+0x0/0x60 returned 0 after 2929 usecs
[ 0.069989] calling topology_init+0x0/0x40 @ 1
[ 0.070081] initcall topology_init+0x0/0x40 returned 0 after 976 usecs
[ 0.070989] calling mtrr_init_finialize+0x0/0x3d @ 1
[ 0.070989] initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs
[ 0.070989] calling param_sysfs_init+0x0/0x224 @ 1
[ 0.098100] initcall param_sysfs_init+0x0/0x224 returned 0 after 27339 usecs
[ 0.098984] calling pm_sysrq_init+0x0/0x19 @ 1
[ 0.098984] initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs
[ 0.098984] calling audit_watch_init+0x0/0x2f @ 1
[ 0.098984] initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs
[ 0.098984] calling default_bdi_init+0x0/0xb2 @ 1
[ 0.099215] initcall default_bdi_init+0x0/0xb2 returned 0 after 976 usecs
[ 0.099984] calling init_bio+0x0/0xda @ 1
[ 0.099984] bio: create slab <bio-0> at 0
[ 0.099984] initcall init_bio+0x0/0xda returned 0 after 0 usecs
[ 0.099984] calling fsnotify_init+0x0/0x12 @ 1
[ 0.099984] initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs
[ 0.099984] calling fsnotify_notification_init+0x0/0xf0 @ 1
[ 0.100051] initcall fsnotify_notification_init+0x0/0xf0 returned 0 after 976 usecs
[ 0.100984] calling cryptomgr_init+0x0/0x12 @ 1
[ 0.100984] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
[ 0.100984] calling blk_settings_init+0x0/0x2a @ 1
[ 0.100984] initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
[ 0.100984] calling blk_ioc_init+0x0/0x2a @ 1
[ 0.100984] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
[ 0.100984] calling blk_softirq_init+0x0/0x6e @ 1
[ 0.100984] initcall blk_softirq_init+0x0/0x6e returned 0 after 0 usecs
[ 0.100984] calling blk_iopoll_setup+0x0/0x6e @ 1
[ 0.100984] initcall blk_iopoll_setup+0x0/0x6e returned 0 after 0 usecs
[ 0.100984] calling genhd_device_init+0x0/0x7b @ 1
[ 0.101206] initcall genhd_device_init+0x0/0x7b returned 0 after 976 usecs
[ 0.101984] calling pci_slot_init+0x0/0x46 @ 1
[ 0.101984] initcall pci_slot_init+0x0/0x46 returned 0 after 0 usecs
[ 0.101984] calling fbmem_init+0x0/0x98 @ 1
[ 0.102048] initcall fbmem_init+0x0/0x98 returned 0 after 976 usecs
[ 0.102984] calling acpi_init+0x0/0x130 @ 1
[ 0.104125] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.105016] ACPI: EC: Look up EC in DSDT
[ 0.114319] ACPI: Interpreter enabled
[ 0.114982] ACPI: (supports S0 S3 S4 S5)
[ 0.114982] ACPI: Using IOAPIC for interrupt routing
[ 0.137209] initcall acpi_init+0x0/0x130 returned 0 after 34174 usecs
[ 0.137978] calling dock_init+0x0/0x8d @ 1
[ 0.137978] ACPI: No dock devices found.
[ 0.137978] initcall dock_init+0x0/0x8d returned 0 after 0 usecs
[ 0.137978] calling acpi_pci_root_init+0x0/0x28 @ 1
[ 0.139406] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
[ 0.139978] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.140480] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.140978] pci 0000:00:01.0: PME# disabled
[ 0.141136] pci 0000:00:1a.0: reg 20 io port: [0x3000-0x301f]
[ 0.141978] pci 0000:00:1a.1: reg 20 io port: [0x3020-0x303f]
[ 0.141978] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd2304000-0xd23043ff]
[ 0.141978] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.141978] pci 0000:00:1a.7: PME# disabled
[ 0.141978] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd2300000-0xd2303fff]
[ 0.141978] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.141978] pci 0000:00:1b.0: PME# disabled
[ 0.141978] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.141978] pci 0000:00:1c.0: PME# disabled
[ 0.141978] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.141978] pci 0000:00:1c.4: PME# disabled
[ 0.141978] pci 0000:00:1d.0: reg 20 io port: [0x3040-0x305f]
[ 0.141978] pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f]
[ 0.141978] pci 0000:00:1d.2: reg 20 io port: [0x3080-0x309f]
[ 0.141978] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd2304400-0xd23047ff]
[ 0.141978] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.141978] pci 0000:00:1d.7: PME# disabled
[ 0.141978] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.141978] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.141978] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
[ 0.141978] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at c800 (mask 00ff)
[ 0.141978] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.141978] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.141978] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.141978] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.141978] pci 0000:00:1f.2: reg 20 io port: [0x30d0-0x30df]
[ 0.141978] pci 0000:00:1f.2: reg 24 io port: [0x30c0-0x30cf]
[ 0.141978] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.141978] pci 0000:00:1f.2: PME# disabled
[ 0.141978] pci 0000:00:1f.3: reg 10 32bit mmio: [0xd2304800-0xd23048ff]
[ 0.141978] pci 0000:00:1f.3: reg 20 io port: [0x30a0-0x30bf]
[ 0.141978] pci 0000:00:1f.5: reg 10 io port: [0x3428-0x342f]
[ 0.141978] pci 0000:00:1f.5: reg 14 io port: [0x341c-0x341f]
[ 0.141978] pci 0000:00:1f.5: reg 18 io port: [0x3420-0x3427]
[ 0.141978] pci 0000:00:1f.5: reg 1c io port: [0x3418-0x341b]
[ 0.141978] pci 0000:00:1f.5: reg 20 io port: [0x30f0-0x30ff]
[ 0.141978] pci 0000:00:1f.5: reg 24 io port: [0x30e0-0x30ef]
[ 0.141978] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.141978] pci 0000:00:1f.5: PME# disabled
[ 0.141978] pci 0000:01:00.0: reg 10 32bit mmio: [0xd1000000-0xd1ffffff]
[ 0.141978] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.141978] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd0ffffff]
[ 0.141978] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.141978] pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd1ffffff]
[ 0.141978] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.141978] pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
[ 0.142145] pci 0000:03:00.0: reg 10 64bit mmio: [0xd2000000-0xd200ffff]
[ 0.142978] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.142978] pci 0000:03:00.0: PME# disabled
[ 0.142978] pci 0000:00:1c.4: bridge 32bit mmio: [0xd2000000-0xd20fffff]
[ 0.142978] pci 0000:00:1e.0: transparent bridge
[ 0.142978] pci_bus 0000:00: on NUMA node 0
[ 0.142978] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.143498] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
[ 0.143978] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.143978] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.143978] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.143978] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1a.1
(XEN) PCI add device 00:1a.7
(XEN) PCI add device 00:1b.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.4
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) PCI add device 00:1d.2
(XEN) PCI add device 00:1d.7
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 00:1f.5
(XEN) PCI add device 01:00.0
(XEN) PCI add device 03:00.0
[ 0.171116] initcall acpi_pci_root_init+0x0/0x28 returned 0 after 33198 usecs
[ 0.171973] calling acpi_pci_link_init+0x0/0x43 @ 1
[ 0.172183] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.172973] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.172973] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.172973] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.172973] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.172973] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.172973] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.172973] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.173040] initcall acpi_pci_link_init+0x0/0x43 returned 0 after 1952 usecs
[ 0.173973] calling pnp_init+0x0/0x12 @ 1
[ 0.174111] initcall pnp_init+0x0/0x12 returned 0 after 976 usecs
[ 0.174973] calling __setup_shutdown_event+0x0/0x21 @ 1
[ 0.174973] initcall __setup_shutdown_event+0x0/0x21 returned 0 after 0 usecs
[ 0.174973] calling xenbus_probe_backend_init+0x0/0x2d @ 1
[ 0.175012] initcall xenbus_probe_backend_init+0x0/0x2d returned 0 after 976 usecs
[ 0.175973] calling xenbus_probe_frontend_init+0x0/0x2d @ 1
[ 0.176054] initcall xenbus_probe_frontend_init+0x0/0x2d returned 0 after 976 usecs
[ 0.176973] calling balloon_init+0x0/0x268 @ 1
[ 0.176973] xen_balloon: Initialising balloon driver with page order 0.
[ 0.177062] last_pfn = 0x1b3eb0 max_arch_pfn = 0x400000000
[ 0.194082] initcall balloon_init+0x0/0x268 returned 0 after 17575 usecs
[ 0.194970] calling xen_acpi_processor_extcntl_init+0x0/0x4f @ 1
[ 0.194970] initcall xen_acpi_processor_extcntl_init+0x0/0x4f returned 0 after 0 usecs
[ 0.194970] calling misc_init+0x0/0xb7 @ 1
[ 0.195097] initcall misc_init+0x0/0xb7 returned 0 after 976 usecs
[ 0.195970] calling vga_arb_device_init+0x0/0x80 @ 1
[ 0.196060] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.196969] vgaarb: loaded
[ 0.196969] initcall vga_arb_device_init+0x0/0x80 returned 0 after 976 usecs
[ 0.196969] calling cn_init+0x0/0x9e @ 1
[ 0.197002] initcall cn_init+0x0/0x9e returned 0 after 976 usecs
[ 0.197969] calling init_scsi+0x0/0x91 @ 1
[ 0.198081] SCSI subsystem initialized
[ 0.198969] initcall init_scsi+0x0/0x91 returned 0 after 976 usecs
[ 0.198969] calling ata_init+0x0/0x351 @ 1
[ 0.199025] libata version 3.00 loaded.
[ 0.199969] initcall ata_init+0x0/0x351 returned 0 after 976 usecs
[ 0.199969] calling phy_init+0x0/0x2e @ 1
[ 0.200080] initcall phy_init+0x0/0x2e returned 0 after 976 usecs
[ 0.200969] calling init_pcmcia_cs+0x0/0x36 @ 1
[ 0.201033] initcall init_pcmcia_cs+0x0/0x36 returned 0 after 976 usecs
[ 0.201969] calling usb_init+0x0/0x1a9 @ 1
[ 0.202100] usbcore: registered new interface driver usbfs
[ 0.203030] usbcore: registered new interface driver hub
[ 0.204039] usbcore: registered new device driver usb
[ 0.204968] initcall usb_init+0x0/0x1a9 returned 0 after 2929 usecs
[ 0.204968] calling serio_init+0x0/0x86 @ 1
[ 0.205077] initcall serio_init+0x0/0x86 returned 0 after 976 usecs
[ 0.205968] calling input_init+0x0/0x13c @ 1
[ 0.206051] initcall input_init+0x0/0x13c returned 0 after 976 usecs
[ 0.206968] calling rtc_init+0x0/0x71 @ 1
[ 0.207030] initcall rtc_init+0x0/0x71 returned 0 after 976 usecs
[ 0.207968] calling power_supply_class_init+0x0/0x38 @ 1
[ 0.207995] initcall power_supply_class_init+0x0/0x38 returned 0 after 976 usecs
[ 0.208968] calling hwmon_init+0x0/0x106 @ 1
[ 0.209006] initcall hwmon_init+0x0/0x106 returned 0 after 976 usecs
[ 0.209967] calling thermal_init+0x0/0x3f @ 1
[ 0.210031] initcall thermal_init+0x0/0x3f returned 0 after 976 usecs
[ 0.210967] calling md_init+0x0/0xd0 @ 1
[ 0.210967] initcall md_init+0x0/0xd0 returned 0 after 0 usecs
[ 0.210967] calling leds_init+0x0/0x40 @ 1
[ 0.211033] initcall leds_init+0x0/0x40 returned 0 after 976 usecs
[ 0.211967] calling pci_subsys_init+0x0/0x107 @ 1
[ 0.211967] PCI: Using ACPI for IRQ routing
[ 0.211967] pci 0000:00:1c.0: BAR 7: can't allocate resource
[ 0.211967] initcall pci_subsys_init+0x0/0x107 returned 0 after 0 usecs
[ 0.211967] calling proto_init+0x0/0x12 @ 1
[ 0.211967] initcall proto_init+0x0/0x12 returned 0 after 0 usecs
[ 0.211967] calling net_dev_init+0x0/0x175 @ 1
[ 0.212171] initcall net_dev_init+0x0/0x175 returned 0 after 976 usecs
[ 0.212967] calling neigh_init+0x0/0x71 @ 1
[ 0.212967] initcall neigh_init+0x0/0x71 returned 0 after 0 usecs
[ 0.212967] calling fib_rules_init+0x0/0xa6 @ 1
[ 0.212967] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs
[ 0.212967] calling pktsched_init+0x0/0xd0 @ 1
[ 0.212967] initcall pktsched_init+0x0/0xd0 returned 0 after 0 usecs
[ 0.212967] calling tc_filter_init+0x0/0x4c @ 1
[ 0.212967] initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs
[ 0.212967] calling tc_action_init+0x0/0x4c @ 1
[ 0.212967] initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs
[ 0.212967] calling genl_init+0x0/0x8f @ 1
[ 0.212999] initcall genl_init+0x0/0x8f returned 0 after 976 usecs
[ 0.213967] calling cipso_v4_init+0x0/0x61 @ 1
[ 0.213967] initcall cipso_v4_init+0x0/0x61 returned 0 after 0 usecs
[ 0.213967] calling wireless_nlevent_init+0x0/0x12 @ 1
[ 0.213967] initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs
[ 0.213967] calling cfg80211_init+0x0/0x92 @ 1
[ 0.214122] cfg80211: Using static regulatory domain info
[ 0.214967] cfg80211: Regulatory domain: US
[ 0.214967] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.214967] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.214967] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.214967] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.214967] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.214967] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.214967] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.215008] cfg80211: Calling CRDA for country: US
[ 0.216044] initcall cfg80211_init+0x0/0x92 returned 0 after 2929 usecs
[ 0.216966] calling ieee80211_init+0x0/0xb @ 1
[ 0.216966] initcall ieee80211_init+0x0/0xb returned 0 after 0 usecs
[ 0.216966] calling netlbl_init+0x0/0x81 @ 1
[ 0.216966] NetLabel: Initializing
[ 0.216966] NetLabel: domain hash size = 128
[ 0.216966] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.216966] NetLabel: unlabeled traffic allowed by default
[ 0.216966] initcall netlbl_init+0x0/0x81 returned 0 after 0 usecs
[ 0.216966] calling rfkill_init+0x0/0x79 @ 1
[ 0.217033] initcall rfkill_init+0x0/0x79 returned 0 after 976 usecs
[ 0.217966] calling sysctl_init+0x0/0x48 @ 1
[ 0.217966] initcall sysctl_init+0x0/0x48 returned 0 after 0 usecs
[ 0.217966] calling xen_mc_debugfs+0x0/0x118 @ 1
[ 0.217966] initcall xen_mc_debugfs+0x0/0x118 returned 0 after 0 usecs
[ 0.217966] calling xen_mmu_debugfs+0x0/0x2be @ 1
[ 0.218133] initcall xen_mmu_debugfs+0x0/0x2be returned 0 after 976 usecs
[ 0.218966] calling xen_spinlock_debugfs+0x0/0x24e @ 1
[ 0.219062] initcall xen_spinlock_debugfs+0x0/0x24e returned 0 after 976 usecs
[ 0.219966] calling print_all_ICs+0x0/0x51b @ 1
[ 0.219977] initcall print_all_ICs+0x0/0x51b returned 0 after 976 usecs
[ 0.220966] calling hpet_late_init+0x0/0xc5 @ 1
[ 0.220966] initcall hpet_late_init+0x0/0xc5 returned -19 after 0 usecs
[ 0.220966] calling init_k8_nbs+0x0/0x28 @ 1
[ 0.220966] initcall init_k8_nbs+0x0/0x28 returned 0 after 0 usecs
[ 0.220966] calling clocksource_done_booting+0x0/0x5a @ 1
[ 0.220966] Switching to clocksource xen
[ 0.221083] initcall clocksource_done_booting+0x0/0x5a returned 0 after 1067 usecs
[ 0.222021] calling rb_init_debugfs+0x0/0x2f @ 1
[ 0.234285] initcall rb_init_debugfs+0x0/0x2f returned 0 after 54 usecs
[ 0.235234] calling tracer_init_debugfs+0x0/0x2d1 @ 1
[ 0.247061] initcall tracer_init_debugfs+0x0/0x2d1 returned 0 after 350 usecs
[ 0.247781] calling init_trace_printk_function_export+0x0/0x2f @ 1
[ 0.247781] initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 8 usecs
[ 0.247781] calling event_trace_init+0x0/0x1f7 @ 1
[ 0.281995] initcall event_trace_init+0x0/0x1f7 returned 0 after 6779 usecs
[ 0.282304] calling init_pipe_fs+0x0/0x4c @ 1
[ 0.282304] initcall init_pipe_fs+0x0/0x4c returned 0 after 23 usecs
[ 0.282304] calling eventpoll_init+0x0/0xba @ 1
[ 0.282304] initcall eventpoll_init+0x0/0xba returned 0 after 6 usecs
[ 0.282304] calling anon_inode_init+0x0/0x125 @ 1
[ 0.282304] initcall anon_inode_init+0x0/0x125 returned 0 after 16 usecs
[ 0.282304] calling blk_scsi_ioctl_init+0x0/0x289 @ 1
[ 0.282304] initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 0 usecs
[ 0.282304] calling acpi_event_init+0x0/0x81 @ 1
[ 0.342830] initcall acpi_event_init+0x0/0x81 returned 0 after 32 usecs
[ 0.343806] calling pnpacpi_init+0x0/0x8c @ 1
[ 0.343806] pnp: PnP ACPI init
[ 0.357878] ACPI: bus type pnp registered
[ 0.364882] xen: registering gsi 1 triggering 1 polarity 0
[ 0.365348] xen_allocate_pirq: returning irq 1 for gsi 1
[ 0.365348] xen: --> irq=1
(XEN) IOAPIC[0]: Set PCI routing entry (2-1 -> 0x28 -> IRQ 1 Mode:0 Active:0)
[ 0.386001] xen: registering gsi 12 triggering 1 polarity 0
[ 0.386990] xen_allocate_pirq: returning irq 12 for gsi 12
[ 0.386990] xen: --> irq=12
(XEN) IOAPIC[0]: Set PCI routing entry (2-12 -> 0x70 -> IRQ 12 Mode:0 Active:0)
[ 0.408401] xen: registering gsi 13 triggering 1 polarity 0
[ 0.409346] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.409346] xen: --> irq=13
(XEN) IOAPIC[0]: Set PCI routing entry (2-13 -> 0x78 -> IRQ 13 Mode:0 Active:0)
[ 0.430441] xen: registering gsi 8 triggering 1 polarity 0
[ 0.431304] xen_allocate_pirq: returning irq 8 for gsi 8
[ 0.431304] xen: --> irq=8
(XEN) IOAPIC[0]: Set PCI routing entry (2-8 -> 0x50 -> IRQ 8 Mode:0 Active:0)
[ 0.453452] xen: registering gsi 4 triggering 1 polarity 0
[ 0.454305] xen_allocate_pirq: returning irq 4 for gsi 4
[ 0.454305] xen: --> irq=4
[ 0.467857] Already setup the GSI :4
[ 0.472925] xen: registering gsi 6 triggering 1 polarity 0
[ 0.473305] xen_allocate_pirq: returning irq 6 for gsi 6
[ 0.473305] xen: --> irq=6
(XEN) IOAPIC[0]: Set PCI routing entry (2-6 -> 0x40 -> IRQ 6 Mode:0 Active:0)
[ 0.495642] xen: registering gsi 7 triggering 1 polarity 0
[ 0.496305] xen_allocate_pirq: returning irq 7 for gsi 7
[ 0.496305] xen: --> irq=7
(XEN) IOAPIC[0]: Set PCI routing entry (2-7 -> 0x48 -> IRQ 7 Mode:0 Active:0)
[ 0.518393] pnp: PnP ACPI: found 11 devices
[ 0.518865] ACPI: ACPI bus type pnp unregistered
[ 0.518865] initcall pnpacpi_init+0x0/0x8c returned 0 after 169191 usecs
[ 0.518865] calling pnp_system_init+0x0/0x12 @ 1
[ 0.518865] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.518865] system 00:01: ioport range 0x500-0x57f has been reserved
[ 0.518865] system 00:01: ioport range 0x800-0x80f has been reserved
[ 0.518865] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.518865] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 0.518865] system 00:01: ioport range 0xc800-0xc87f has been reserved
[ 0.518865] system 00:01: ioport range 0xc880-0xc8ff has been reserved
[ 0.518865] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 0.518865] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.518865] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.518865] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.518865] system 00:01: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.518865] system 00:01: iomem range 0xfef00000-0xfeffffff has been reserved
[ 0.637697] initcall pnp_system_init+0x0/0x12 returned 0 after 95556 usecs
[ 0.638672] calling pcistub_init+0x0/0x1d7 @ 1
[ 0.650225] initcall pcistub_init+0x0/0x1d7 returned 0 after 453 usecs
[ 0.651182] calling chr_dev_init+0x0/0xc3 @ 1
[ 0.663288] initcall chr_dev_init+0x0/0xc3 returned 0 after 1410 usecs
[ 0.664262] calling firmware_class_init+0x0/0x79 @ 1
[ 0.675649] initcall firmware_class_init+0x0/0x79 returned 0 after 118 usecs
[ 0.676622] calling init_pcmcia_bus+0x0/0x74 @ 1
[ 0.688225] initcall init_pcmcia_bus+0x0/0x74 returned 0 after 152 usecs
[ 0.689171] calling cpufreq_gov_performance_init+0x0/0x12 @ 1
[ 0.689171] initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 1 usecs
[ 0.689171] calling cpufreq_gov_userspace_init+0x0/0x12 @ 1
[ 0.689171] initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 usecs
[ 0.689171] calling init_acpi_pm_clocksource+0x0/0xf6 @ 1
[ 0.736428] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.737303] initcall init_acpi_pm_clocksource+0x0/0xf6 returned -19 after 13531 usecs
[ 0.737303] calling pcibios_assign_resources+0x0/0x74 @ 1
[ 0.737303] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
[ 0.737303] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.737303] pci 0000:00:01.0: IO window: disabled
[ 0.737303] pci 0000:00:01.0: MEM window: 0xd0000000-0xd1ffffff
[ 0.737303] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.737303] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.737303] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.737303] pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff
[ 0.737303] pci 0000:00:1c.0: PREFETCH window: 0x00000040200000-0x000000403fffff
[ 0.737303] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.737303] pci 0000:00:1c.4: IO window: 0x4000-0x4fff
[ 0.737303] pci 0000:00:1c.4: MEM window: 0xd2000000-0xd20fffff
[ 0.737303] pci 0000:00:1c.4: PREFETCH window: 0x00000040400000-0x000000405fffff
[ 0.737303] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 0.737303] pci 0000:00:1e.0: IO window: disabled
[ 0.737303] pci 0000:00:1e.0: MEM window: disabled
[ 0.737303] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.737303] xen: registering gsi 16 triggering 0 polarity 1
[ 0.737303] alloc irq_desc for 16 on node 0
[ 0.737303] alloc kstat_irqs on node 0
[ 0.882949] xen: --> irq=16
(XEN) IOAPIC[0]: Set PCI routing entry (2-16 -> 0x98 -> IRQ 16 Mode:1 Active:1)
[ 0.892886] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.893876] pci 0000:00:01.0: setting latency timer to 64
[ 0.893876] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.893876] xen: registering gsi 16 triggering 0 polarity 1
[ 0.893876] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.893876] xen: --> irq=16
[ 0.926579] Already setup the GSI :16
[ 0.927569] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.927569] pci 0000:00:1c.0: setting latency timer to 64
[ 0.927569] xen: registering gsi 16 triggering 0 polarity 1
[ 0.927569] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.927569] xen: --> irq=16
[ 0.958073] Already setup the GSI :16
[ 0.959062] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.959062] pci 0000:00:1c.4: setting latency timer to 64
[ 0.959062] pci 0000:00:1e.0: setting latency timer to 64
[ 0.959062] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.959062] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.959062] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd1ffffff]
[ 0.959062] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.959062] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.959062] pci_bus 0000:02: resource 1 mem: [0x40000000-0x401fffff]
[ 0.959062] pci_bus 0000:02: resource 2 pref mem [0x40200000-0x403fffff]
[ 0.959062] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff]
[ 0.959062] pci_bus 0000:03: resource 1 mem: [0xd2000000-0xd20fffff]
[ 0.959062] pci_bus 0000:03: resource 2 pref mem [0x40400000-0x405fffff]
[ 0.959062] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 0.959062] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.959062] initcall pcibios_assign_resources+0x0/0x74 returned 0 after 295091 usecs
[ 0.959062] calling sysctl_core_init+0x0/0x38 @ 1
[ 0.959062] initcall sysctl_core_init+0x0/0x38 returned 0 after 75 usecs
[ 0.959062] calling inet_init+0x0/0x20a @ 1
[ 0.959062] NET: Registered protocol family 2
[ 1.090136] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.099394] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.109774] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.110308] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.110308] TCP reno registered
[ 1.110308] initcall inet_init+0x0/0x20a returned 0 after 41903 usecs
[ 1.110308] calling af_unix_init+0x0/0x55 @ 1
[ 1.110308] NET: Registered protocol family 1
[ 1.110308] initcall af_unix_init+0x0/0x55 returned 0 after 4578 usecs
[ 1.110308] calling init_sunrpc+0x0/0x5d @ 1
[ 1.156241] RPC: Registered udp transport module.
[ 1.158063] RPC: Registered tcp transport module.
[ 1.166063] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.173200] initcall init_sunrpc+0x0/0x5d returned 0 after 16976 usecs
[ 1.174058] calling pci_apply_final_quirks+0x0/0x36 @ 1
[ 1.174058] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x003b
[ 1.174058] pci 0000:00:1a.0: Performing full reset
[ 1.197881] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 1.198823] pci 0000:00:1a.1: Performing full reset
[ 1.210073] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b
[ 1.210953] pci 0000:00:1d.0: Performing full reset
[ 1.222182] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 1.223144] pci 0000:00:1d.1: Performing full reset
[ 1.234320] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 1.235252] pci 0000:00:1d.2: Performing full reset
[ 1.246520] pci 0000:01:00.0: Boot video device
[ 1.247389] initcall pci_apply_final_quirks+0x0/0x36 returned 0 after 64098 usecs
[ 1.247389] calling populate_rootfs+0x0/0xd7 @ 1
[ 1.264548] Trying to unpack rootfs image as initramfs...
[ 1.287342] Freeing initrd memory: 7735k freed
[ 1.288055] initcall populate_rootfs+0x0/0xd7 returned 0 after 30737 usecs
[ 1.288055] calling pci_iommu_init+0x0/0x3a @ 1
[ 1.288055] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.288055] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 1.288055] DMA: software IO TLB at phys 0x20000000 - 0x24000000
[ 1.288055] initcall pci_iommu_init+0x0/0x3a returned 0 after 21393 usecs
[ 1.288055] calling irqfd_module_init+0x0/0x31 @ 1
[ 1.342604] initcall irqfd_module_init+0x0/0x31 returned 0 after 286 usecs
[ 1.343580] calling vmx_init+0x0/0x1ff @ 1
[ 1.354414] kvm: no hardware support
[ 1.355330] initcall vmx_init+0x0/0x1ff returned -95 after 3857 usecs
[ 1.355330] initcall vmx_init+0x0/0x1ff returned with error code -95
[ 1.355330] calling svm_init+0x0/0x19 @ 1
[ 1.355330] has_svm: not amd
[ 1.355330] kvm: no hardware support
[ 1.355330] initcall svm_init+0x0/0x19 returned -95 after 6813 usecs
[ 1.355330] initcall svm_init+0x0/0x19 returned with error code -95
[ 1.355330] calling i8259A_init_sysfs+0x0/0x22 @ 1
[ 1.402148] initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 365 usecs
[ 1.403133] calling vsyscall_init+0x0/0x6c @ 1
[ 1.414271] initcall vsyscall_init+0x0/0x6c returned 0 after 56 usecs
[ 1.415250] calling sbf_init+0x0/0xe9 @ 1
[ 1.415250] Simple Boot Flag at 0x44 set to 0x1
[ 1.415250] initcall sbf_init+0x0/0xe9 returned 0 after 4720 usecs
[ 1.415250] calling i8237A_init_sysfs+0x0/0x22 @ 1
[ 1.442221] initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 238 usecs
[ 1.443207] calling add_rtc_cmos+0x0/0xa9 @ 1
[ 1.443207] initcall add_rtc_cmos+0x0/0xa9 returned 0 after 3 usecs
[ 1.443207] calling cache_sysfs_init+0x0/0x64 @ 1
[ 1.467027] initcall cache_sysfs_init+0x0/0x64 returned 0 after 1096 usecs
[ 1.468011] calling mce_init_device+0x0/0xff @ 1
[ 1.479837] initcall mce_init_device+0x0/0xff returned 0 after 552 usecs
[ 1.480770] calling msr_init+0x0/0x14a @ 1
[ 1.491781] initcall msr_init+0x0/0x14a returned 0 after 407 usecs
[ 1.492715] calling cpuid_init+0x0/0x14a @ 1
[ 1.503371] initcall cpuid_init+0x0/0x14a returned 0 after 407 usecs
[ 1.504357] calling ioapic_init_sysfs+0x0/0xb3 @ 1
[ 1.515507] initcall ioapic_init_sysfs+0x0/0xb3 returned 0 after 241 usecs
[ 1.516440] calling add_pcspkr+0x0/0x28 @ 1
[ 1.527437] initcall add_pcspkr+0x0/0x28 returned 0 after 130 usecs
[ 1.528419] calling microcode_init+0x0/0x132 @ 1
[ 1.539357] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.540344] initcall microcode_init+0x0/0x132 returned 0 after 8524 usecs
[ 1.540344] calling start_periodic_check_for_corruption+0x0/0x37 @ 1
[ 1.540344] Scanning for low memory corruption every 60 seconds
[ 1.540344] initcall start_periodic_check_for_corruption+0x0/0x37 returned 0 after 6111 usecs
[ 1.540344] calling audit_classes_init+0x0/0xaf @ 1
[ 1.582436] initcall audit_classes_init+0x0/0xaf returned 0 after 54 usecs
[ 1.583384] calling init_vdso_vars+0x0/0x241 @ 1
[ 1.594726] initcall init_vdso_vars+0x0/0x241 returned 0 after 48 usecs
[ 1.595696] calling ia32_binfmt_init+0x0/0x14 @ 1
[ 1.595696] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 32 usecs
[ 1.595696] calling sysenter_setup+0x0/0x2f1 @ 1
[ 1.595696] initcall sysenter_setup+0x0/0x2f1 returned 0 after 4 usecs
[ 1.595696] calling proc_schedstat_init+0x0/0x22 @ 1
[ 1.595696] initcall proc_schedstat_init+0x0/0x22 returned 0 after 8 usecs
[ 1.595696] calling proc_execdomains_init+0x0/0x22 @ 1
[ 1.595696] initcall proc_execdomains_init+0x0/0x22 returned 0 after 4 usecs
[ 1.595696] calling ioresources_init+0x0/0x3c @ 1
[ 1.595696] initcall ioresources_init+0x0/0x3c returned 0 after 9 usecs
[ 1.595696] calling uid_cache_init+0x0/0xb1 @ 1
[ 1.668335] initcall uid_cache_init+0x0/0xb1 returned 0 after 26 usecs
[ 1.669320] calling init_posix_timers+0x0/0x17a @ 1
[ 1.669320] initcall init_posix_timers+0x0/0x17a returned 0 after 2 usecs
[ 1.669320] calling init_posix_cpu_timers+0x0/0xe5 @ 1
[ 1.669320] initcall init_posix_cpu_timers+0x0/0xe5 returned 0 after 0 usecs
[ 1.669320] calling nsproxy_cache_init+0x0/0x2d @ 1
[ 1.669320] initcall nsproxy_cache_init+0x0/0x2d returned 0 after 0 usecs
[ 1.669320] calling create_proc_profile+0x0/0x283 @ 1
[ 1.669320] initcall create_proc_profile+0x0/0x283 returned 0 after 0 usecs
[ 1.669320] calling timekeeping_init_device+0x0/0x22 @ 1
[ 1.737080] initcall timekeeping_init_device+0x0/0x22 returned 0 after 236 usecs
[ 1.738063] calling init_clocksource_sysfs+0x0/0x50 @ 1
[ 1.750912] initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 225 usecs
[ 1.751844] calling init_timer_list_procfs+0x0/0x2c @ 1
[ 1.751844] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 4 usecs
[ 1.751844] calling init_tstats_procfs+0x0/0x2c @ 1
[ 1.751844] initcall init_tstats_procfs+0x0/0x2c returned 0 after 4 usecs
[ 1.751844] calling futex_init+0x0/0x68 @ 1
[ 1.788960] initcall futex_init+0x0/0x68 returned 0 after 48 usecs
[ 1.789914] calling proc_dma_init+0x0/0x22 @ 1
[ 1.800349] initcall proc_dma_init+0x0/0x22 returned 0 after 42 usecs
[ 1.801312] calling proc_modules_init+0x0/0x22 @ 1
[ 1.801312] initcall proc_modules_init+0x0/0x22 returned 0 after 4 usecs
[ 1.801312] calling kallsyms_init+0x0/0x25 @ 1
[ 1.801312] initcall kallsyms_init+0x0/0x25 returned 0 after 4 usecs
[ 1.801312] calling snapshot_device_init+0x0/0x12 @ 1
[ 1.836496] initcall snapshot_device_init+0x0/0x12 returned 0 after 134 usecs
[ 1.837429] calling crash_save_vmcoreinfo_init+0x0/0x4a5 @ 1
[ 1.837429] initcall crash_save_vmcoreinfo_init+0x0/0x4a5 returned 0 after 25 usecs
[ 1.837429] calling crash_notes_memory_init+0x0/0x37 @ 1
[ 1.837429] initcall crash_notes_memory_init+0x0/0x37 returned 0 after 2 usecs
[ 1.837429] calling pid_namespaces_init+0x0/0x2d @ 1
[ 1.837429] initcall pid_namespaces_init+0x0/0x2d returned 0 after 3 usecs
[ 1.837429] calling audit_init+0x0/0x133 @ 1
[ 1.837429] audit: initializing netlink socket (disabled)
[ 1.894854] type=2000 audit(1305674330.317:1): initialized
[ 1.895825] initcall audit_init+0x0/0x133 returned 0 after 11295 usecs
[ 1.895825] calling audit_tree_init+0x0/0x49 @ 1
[ 1.895825] initcall audit_tree_init+0x0/0x49 returned 0 after 1 usecs
[ 1.895825] calling init_kprobes+0x0/0x148 @ 1
[ 1.935037] initcall init_kprobes+0x0/0x148 returned 0 after 10518 usecs
[ 1.935055] calling utsname_sysctl_init+0x0/0x14 @ 1
[ 1.947563] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 104 usecs
[ 1.948460] calling init_tracepoints+0x0/0x12 @ 1
[ 1.948460] initcall init_tracepoints+0x0/0x12 returned 0 after 0 usecs
[ 1.948460] calling init_events+0x0/0x64 @ 1
[ 1.948460] initcall init_events+0x0/0x64 returned 0 after 2 usecs
[ 1.948460] calling init_sched_switch_trace+0x0/0x12 @ 1
[ 1.948460] initcall init_sched_switch_trace+0x0/0x12 returned 0 after 1 usecs
[ 1.948460] calling init_blk_tracer+0x0/0x55 @ 1
[ 1.948460] initcall init_blk_tracer+0x0/0x55 returned 0 after 1 usecs
[ 1.948460] calling perf_event_sysfs_init+0x0/0x19 @ 1
[ 1.948460] initcall perf_event_sysfs_init+0x0/0x19 returned 0 after 9 usecs
[ 1.948460] calling init_per_zone_wmark_min+0x0/0x67 @ 1
[ 1.948460] initcall init_per_zone_wmark_min+0x0/0x67 returned 0 after 213 usecs
[ 1.948460] calling kswapd_init+0x0/0x20 @ 1
[ 2.035235] initcall kswapd_init+0x0/0x20 returned 0 after 124 usecs
[ 2.036207] calling setup_vmstat+0x0/0xc5 @ 1
[ 2.036207] initcall setup_vmstat+0x0/0xc5 returned 0 after 24 usecs
[ 2.036207] calling mm_sysfs_init+0x0/0x29 @ 1
[ 2.036207] initcall mm_sysfs_init+0x0/0x29 returned 0 after 5 usecs
[ 2.036207] calling proc_vmalloc_init+0x0/0x25 @ 1
[ 2.036207] initcall proc_vmalloc_init+0x0/0x25 returned 0 after 4 usecs
[ 2.036207] calling procswaps_init+0x0/0x22 @ 1
[ 2.036207] initcall procswaps_init+0x0/0x22 returned 0 after 4 usecs
[ 2.036207] calling hugetlb_init+0x0/0x3b0 @ 1
[ 2.036207] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.036207] initcall hugetlb_init+0x0/0x3b0 returned 0 after 6557 usecs
[ 2.036207] calling slab_proc_init+0x0/0x25 @ 1
[ 2.036207] initcall slab_proc_init+0x0/0x25 returned 0 after 6 usecs
[ 2.036207] calling slab_sysfs_init+0x0/0xee @ 1
[ 2.133347] initcall slab_sysfs_init+0x0/0xee returned 0 after 9021 usecs
[ 2.134056] calling fasync_init+0x0/0x2a @ 1
[ 2.134056] initcall fasync_init+0x0/0x2a returned 0 after 7 usecs
[ 2.134056] calling proc_filesystems_init+0x0/0x22 @ 1
[ 2.134056] initcall proc_filesystems_init+0x0/0x22 returned 0 after 5 usecs
[ 2.134056] calling dnotify_init+0x0/0x80 @ 1
[ 2.134056] initcall dnotify_init+0x0/0x80 returned 0 after 13 usecs
[ 2.134056] calling inotify_setup+0x0/0x12 @ 1
[ 2.134056] initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs
[ 2.134056] calling inotify_user_setup+0x0/0xbe @ 1
[ 2.193025] initcall inotify_user_setup+0x0/0xbe returned 0 after 136 usecs
[ 2.193902] calling aio_setup+0x0/0x71 @ 1
[ 2.205050] initcall aio_setup+0x0/0x71 returned 0 after 227 usecs
[ 2.206028] calling proc_locks_init+0x0/0x22 @ 1
[ 2.206028] initcall proc_locks_init+0x0/0x22 returned 0 after 5 usecs
[ 2.206028] calling init_sys32_ioctl+0x0/0x83 @ 1
[ 2.206028] initcall init_sys32_ioctl+0x0/0x83 returned 0 after 13 usecs
[ 2.206028] calling init_mbcache+0x0/0x14 @ 1
[ 2.206028] initcall init_mbcache+0x0/0x14 returned 0 after 0 usecs
[ 2.206028] calling dquot_init+0x0/0xf9 @ 1
[ 2.206028] VFS: Disk quotas dquot_6.5.2
[ 2.256133] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.257057] initcall dquot_init+0x0/0xf9 returned 0 after 11129 usecs
[ 2.257057] calling init_v2_quota_format+0x0/0x12 @ 1
[ 2.257057] initcall init_v2_quota_format+0x0/0x12 returned 0 after 0 usecs
[ 2.257057] calling proc_cmdline_init+0x0/0x22 @ 1
[ 2.257057] initcall proc_cmdline_init+0x0/0x22 returned 0 after 5 usecs
[ 2.257057] calling proc_cpuinfo_init+0x0/0x22 @ 1
[ 2.257057] initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 4 usecs
[ 2.257057] calling proc_devices_init+0x0/0x22 @ 1
[ 2.257057] initcall proc_devices_init+0x0/0x22 returned 0 after 4 usecs
[ 2.257057] calling proc_interrupts_init+0x0/0x22 @ 1
[ 2.257057] initcall proc_interrupts_init+0x0/0x22 returned 0 after 4 usecs
[ 2.257057] calling proc_loadavg_init+0x0/0x22 @ 1
[ 2.257057] initcall proc_loadavg_init+0x0/0x22 returned 0 after 4 usecs
[ 2.257057] calling proc_meminfo_init+0x0/0x22 @ 1
[ 2.257057] initcall proc_meminfo_init+0x0/0x22 returned 0 after 4 usecs
[ 2.257057] calling proc_stat_init+0x0/0x22 @ 1
[ 2.257057] initcall proc_stat_init+0x0/0x22 returned 0 after 4 usecs
[ 2.257057] calling proc_uptime_init+0x0/0x22 @ 1
[ 2.257057] initcall proc_uptime_init+0x0/0x22 returned 0 after 4 usecs
[ 2.257057] calling proc_version_init+0x0/0x22 @ 1
[ 2.257057] initcall proc_version_init+0x0/0x22 returned 0 after 4 usecs
[ 2.257057] calling proc_softirqs_init+0x0/0x22 @ 1
[ 2.257057] initcall proc_softirqs_init+0x0/0x22 returned 0 after 4 usecs
[ 2.257057] calling proc_kcore_init+0x0/0xb5 @ 1
[ 2.257057] initcall proc_kcore_init+0x0/0xb5 returned 0 after 9 usecs
[ 2.257057] calling vmcore_init+0x0/0x333 @ 1
[ 2.257057] initcall vmcore_init+0x0/0x333 returned 0 after 0 usecs
[ 2.257057] calling proc_kmsg_init+0x0/0x25 @ 1
[ 2.257057] initcall proc_kmsg_init+0x0/0x25 returned 0 after 4 usecs
[ 2.257057] calling proc_page_init+0x0/0x42 @ 1
[ 2.257057] initcall proc_page_init+0x0/0x42 returned 0 after 8 usecs
[ 2.257057] calling init_devpts_fs+0x0/0x4c @ 1
[ 2.257057] initcall init_devpts_fs+0x0/0x4c returned 0 after 17 usecs
[ 2.257057] calling init_ext3_fs+0x0/0x71 @ 1
[ 2.468529] initcall init_ext3_fs+0x0/0x71 returned 0 after 391 usecs
[ 2.469461] calling journal_init+0x0/0x99 @ 1
[ 2.480806] initcall journal_init+0x0/0x99 returned 0 after 733 usecs
[ 2.481786] calling init_ramfs_fs+0x0/0x12 @ 1
[ 2.481786] initcall init_ramfs_fs+0x0/0x12 returned 0 after 1 usecs
[ 2.481786] calling init_hugetlbfs_fs+0x0/0x98 @ 1
[ 2.504505] initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 188 usecs
[ 2.505463] calling init_fat_fs+0x0/0x4f @ 1
[ 2.516787] initcall init_fat_fs+0x0/0x4f returned 0 after 388 usecs
[ 2.517722] calling init_vfat_fs+0x0/0x12 @ 1
[ 2.517722] initcall init_vfat_fs+0x0/0x12 returned 0 after 1 usecs
[ 2.517722] calling init_msdos_fs+0x0/0x12 @ 1
[ 2.517722] initcall init_msdos_fs+0x0/0x12 returned 0 after 1 usecs
[ 2.517722] calling init_iso9660_fs+0x0/0x71 @ 1
[ 2.551591] initcall init_iso9660_fs+0x0/0x71 returned 0 after 219 usecs
[ 2.552496] calling init_nfs_fs+0x0/0x148 @ 1
[ 2.564133] initcall init_nfs_fs+0x0/0x148 returned 0 after 733 usecs
[ 2.565056] calling init_nlm+0x0/0x22 @ 1
[ 2.565056] initcall init_nlm+0x0/0x22 returned 0 after 112 usecs
[ 2.565056] calling init_nls_cp437+0x0/0x12 @ 1
[ 2.565056] initcall init_nls_cp437+0x0/0x12 returned 0 after 1 usecs
[ 2.565056] calling init_nls_ascii+0x0/0x12 @ 1
[ 2.565056] initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs
[ 2.565056] calling init_nls_iso8859_1+0x0/0x12 @ 1
[ 2.565056] initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 usecs
[ 2.565056] calling init_nls_utf8+0x0/0x29 @ 1
[ 2.565056] initcall init_nls_utf8+0x0/0x29 returned 0 after 1 usecs
[ 2.565056] calling init_autofs4_fs+0x0/0x26 @ 1
[ 2.634395] initcall init_autofs4_fs+0x0/0x26 returned 0 after 192 usecs
[ 2.635327] calling ipc_init+0x0/0x2f @ 1
[ 2.635327] msgmni has been set to 1755
[ 2.635327] initcall ipc_init+0x0/0x2f returned 0 after 4033 usecs
[ 2.635327] calling ipc_sysctl_init+0x0/0x14 @ 1
[ 2.635327] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 150 usecs
[ 2.635327] calling init_mqueue_fs+0x0/0xb4 @ 1
[ 2.673945] initcall init_mqueue_fs+0x0/0xb4 returned 0 after 320 usecs
[ 2.674770] calling key_proc_init+0x0/0x59 @ 1
[ 2.674770] initcall key_proc_init+0x0/0x59 returned 0 after 9 usecs
[ 2.674770] calling selinux_nf_ip_init+0x0/0x62 @ 1
[ 2.674770] SELinux: Registering netfilter hooks
[ 2.674770] initcall selinux_nf_ip_init+0x0/0x62 returned 0 after 4885 usecs
[ 2.674770] calling init_sel_fs+0x0/0x68 @ 1
[ 2.715172] initcall init_sel_fs+0x0/0x68 returned 0 after 378 usecs
[ 2.716056] calling selnl_init+0x0/0x4d @ 1
[ 2.726456] initcall selnl_init+0x0/0x4d returned 0 after 25 usecs
[ 2.727439] calling sel_netif_init+0x0/0x66 @ 1
[ 2.727439] initcall sel_netif_init+0x0/0x66 returned 0 after 3 usecs
[ 2.727439] calling sel_netnode_init+0x0/0x74 @ 1
[ 2.727439] initcall sel_netnode_init+0x0/0x74 returned 0 after 2 usecs
[ 2.727439] calling sel_netport_init+0x0/0x74 @ 1
[ 2.727439] initcall sel_netport_init+0x0/0x74 returned 0 after 2 usecs
[ 2.727439] calling aurule_init+0x0/0x37 @ 1
[ 2.727439] initcall aurule_init+0x0/0x37 returned 0 after 0 usecs
[ 2.727439] calling crypto_wq_init+0x0/0x2e @ 1
[ 2.790420] initcall crypto_wq_init+0x0/0x2e returned 0 after 181 usecs
[ 2.791399] calling crypto_algapi_init+0x0/0xd @ 1
[ 2.791399] initcall crypto_algapi_init+0x0/0xd returned 0 after 5 usecs
[ 2.791399] calling skcipher_module_init+0x0/0x39 @ 1
[ 2.791399] initcall skcipher_module_init+0x0/0x39 returned 0 after 0 usecs
[ 2.791399] calling chainiv_module_init+0x0/0x12 @ 1
[ 2.791399] initcall chainiv_module_init+0x0/0x12 returned 0 after 1 usecs
[ 2.791399] calling eseqiv_module_init+0x0/0x12 @ 1
[ 2.791399] initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.791399] calling hmac_module_init+0x0/0x12 @ 1
[ 2.791399] initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.791399] calling md5_mod_init+0x0/0x12 @ 1
[ 2.864367] initcall md5_mod_init+0x0/0x12 returned 0 after 145 usecs
[ 2.865354] calling sha1_generic_mod_init+0x0/0x12 @ 1
[ 2.876834] initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 134 usecs
[ 2.877820] calling crypto_ecb_module_init+0x0/0x12 @ 1
[ 2.877820] initcall crypto_ecb_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.877820] calling crypto_cbc_module_init+0x0/0x12 @ 1
[ 2.877820] initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.877820] calling des_generic_mod_init+0x0/0x3f @ 1
[ 2.916598] initcall des_generic_mod_init+0x0/0x3f returned 0 after 250 usecs
[ 2.917584] calling aes_init+0x0/0x12 @ 1
[ 2.928660] initcall aes_init+0x0/0x12 returned 0 after 158 usecs
[ 2.929641] calling arc4_init+0x0/0x12 @ 1
[ 2.939719] initcall arc4_init+0x0/0x12 returned 0 after 153 usecs
[ 2.940701] calling crypto_authenc_module_init+0x0/0x12 @ 1
[ 2.940701] initcall crypto_authenc_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.940701] calling krng_mod_init+0x0/0x12 @ 1
[ 2.965210] alg: No test for stdrng (krng)
[ 2.969618] initcall krng_mod_init+0x0/0x12 returned 0 after 4402 usecs
[ 2.970598] calling proc_genhd_init+0x0/0x3c @ 1
[ 2.970598] initcall proc_genhd_init+0x0/0x3c returned 0 after 9 usecs
[ 2.970598] calling bsg_init+0x0/0x12e @ 1
[ 2.993252] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.994185] initcall bsg_init+0x0/0x12e returned 0 after 8085 usecs
[ 2.994185] calling noop_init+0x0/0x14 @ 1
[ 2.994185] io scheduler noop registered
[ 2.994185] initcall noop_init+0x0/0x14 returned 0 after 4107 usecs
[ 2.994185] calling as_init+0x0/0x14 @ 1
[ 2.994185] io scheduler anticipatory registered
[ 2.994185] initcall as_init+0x0/0x14 returned 0 after 4799 usecs
[ 2.994185] calling deadline_init+0x0/0x14 @ 1
[ 2.994185] io scheduler deadline registered
[ 2.994185] initcall deadline_init+0x0/0x14 returned 0 after 4450 usecs
[ 2.994185] calling cfq_init+0x0/0x94 @ 1
[ 3.059694] io scheduler cfq registered (default)
[ 3.060614] initcall cfq_init+0x0/0x94 returned 0 after 5089 usecs
[ 3.060614] calling percpu_counter_startup+0x0/0x3c @ 1
[ 3.060614] initcall percpu_counter_startup+0x0/0x3c returned 0 after 1 usecs
[ 3.060614] calling pci_proc_init+0x0/0x6a @ 1
[ 3.060614] initcall pci_proc_init+0x0/0x6a returned 0 after 160 usecs
[ 3.060614] calling pcie_portdrv_init+0x0/0x4c @ 1
[ 3.101775] alloc irq_desc for 753 on node -1
[ 3.102499] alloc kstat_irqs on node -1
[ 3.110966] pcieport 0000:00:01.0: setting latency timer to 64
[ 3.117725] alloc irq_desc for 752 on node -1
[ 3.118345] alloc kstat_irqs on node -1
[ 3.126905] pcieport 0000:00:1c.0: setting latency timer to 64
[ 3.133786] alloc irq_desc for 751 on node -1
[ 3.134473] alloc kstat_irqs on node -1
[ 3.142984] pcieport 0000:00:1c.4: setting latency timer to 64
[ 3.149823] initcall pcie_portdrv_init+0x0/0x4c returned 0 after 47285 usecs
[ 3.150752] calling aer_service_init+0x0/0x2b @ 1
[ 3.162452] initcall aer_service_init+0x0/0x2b returned 0 after 119 usecs
[ 3.163438] calling pci_hotplug_init+0x0/0x1d @ 1
[ 3.163438] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.163438] initcall pci_hotplug_init+0x0/0x1d returned 0 after 5756 usecs
[ 3.163438] calling pcifront_init+0x0/0x4f @ 1
[ 3.192773] initcall pcifront_init+0x0/0x4f returned 0 after 125 usecs
[ 3.193758] calling fb_console_init+0x0/0x11d @ 1
[ 3.204915] initcall fb_console_init+0x0/0x11d returned 0 after 166 usecs
[ 3.205839] calling genericbl_init+0x0/0x12 @ 1
[ 3.217092] initcall genericbl_init+0x0/0x12 returned 0 after 114 usecs
[ 3.218078] calling xenfb_init+0x0/0x5d @ 1
[ 3.218078] initcall xenfb_init+0x0/0x5d returned -19 after 0 usecs
[ 3.218078] calling efifb_init+0x0/0x1f5 @ 1
[ 3.218078] initcall efifb_init+0x0/0x1f5 returned -19 after 4 usecs
[ 3.218078] calling acpi_reserve_resources+0x0/0xeb @ 1
[ 3.218078] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 4 usecs
[ 3.218078] calling irqrouter_init_sysfs+0x0/0x38 @ 1
[ 3.265406] initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 236 usecs
[ 3.266340] calling acpi_ac_init+0x0/0x45 @ 1
[ 3.277841] initcall acpi_ac_init+0x0/0x45 returned 0 after 189 usecs
[ 3.278776] calling acpi_button_init+0x0/0x56 @ 1
[ 3.289986] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0
[ 3.290970] ACPI: Power Button [PWRB]
[ 3.304112] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.305054] ACPI: Power Button [PWRF]
[ 3.316175] initcall acpi_button_init+0x0/0x56 returned 0 after 25830 usecs
[ 3.317108] calling acpi_fan_init+0x0/0x56 @ 1
[ 3.328507] initcall acpi_fan_init+0x0/0x56 returned 0 after 175 usecs
[ 3.329441] calling acpi_video_init+0x0/0x76 @ 1
[ 3.340666] initcall acpi_video_init+0x0/0x76 returned 0 after 270 usecs
[ 3.341652] calling acpi_processor_init+0x0/0x136 @ 1
[ 3.354356] ACPI: SSDT 00000000bfec278d 001DD (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 3.365512] ACPI: SSDT 00000000bfec296a 0016E (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 3.376150] initcall acpi_processor_init+0x0/0x136 returned 0 after 22437 usecs
[ 3.380313] calling acpi_container_init+0x0/0x42 @ 1
[ 3.395708] initcall acpi_container_init+0x0/0x42 returned 0 after 6158 usecs
[ 3.396055] calling acpi_thermal_init+0x0/0x7b @ 1
[ 3.408600] initcall acpi_thermal_init+0x0/0x7b returned 0 after 200 usecs
[ 3.409531] calling acpi_battery_init+0x0/0x16 @ 1
[ 3.420312] initcall acpi_battery_init+0x0/0x16 returned 0 after 8 usecs
[ 3.421096] calling 1_acpi_battery_init_async+0x0/0x3c @ 610
[ 3.421268] initcall 1_acpi_battery_init_async+0x0/0x3c returned 0 after 160 usecs
[ 3.421215] calling xenbus_probe_initcall+0x0/0x37 @ 1
[ 3.421215] initcall xenbus_probe_initcall+0x0/0x37 returned 0 after 0 usecs
[ 3.421215] calling evtchn_init+0x0/0x6e @ 1
[ 3.460080] Event-channel device installed.
[ 3.463313] initcall evtchn_init+0x0/0x6e returned 0 after 4552 usecs
[ 3.463313] calling gntdev_init+0x0/0x3d @ 1
[ 3.476181] initcall gntdev_init+0x0/0x3d returned 0 after 181 usecs
[ 3.477156] calling pciback_init+0x0/0x151 @ 1
[ 3.487971] initcall pciback_init+0x0/0x151 returned 0 after 256 usecs
[ 3.488904] calling blkif_init+0x0/0x17b @ 1
[ 3.503897] initcall blkif_init+0x0/0x17b returned 0 after 4288 usecs
[ 3.504825] calling blktap_init+0x0/0xf1 @ 1
[ 3.504825] blktap_device_init: blktap device major 253
[ 3.504825] blktap_ring_init: blktap ring major: 251
[ 3.526977] initcall blktap_init+0x0/0xf1 returned 0 after 11354 usecs
[ 3.527571] calling netback_init+0x0/0x3d7 @ 1
[ 3.541457] registering netback
[ 3.545542] initcall netback_init+0x0/0x3d7 returned 0 after 6689 usecs
[ 3.546508] calling xenfs_init+0x0/0x6a @ 1
[ 3.546508] initcall xenfs_init+0x0/0x6a returned 0 after 19 usecs
[ 3.546508] calling hypervisor_subsys_init+0x0/0x25 @ 1
[ 3.546508] initcall hypervisor_subsys_init+0x0/0x25 returned 0 after 0 usecs
[ 3.546508] calling hyper_sysfs_init+0x0/0xfb @ 1
[ 3.581928] initcall hyper_sysfs_init+0x0/0xfb returned 0 after 51 usecs
[ 3.582895] calling platform_pci_module_init+0x0/0x29 @ 1
[ 3.582895] initcall platform_pci_module_init+0x0/0x29 returned -19 after 0 usecs
[ 3.582895] calling rand_initialize+0x0/0x2c @ 1
[ 3.582895] initcall rand_initialize+0x0/0x2c returned 0 after 18 usecs
[ 3.582895] calling tty_init+0x0/0xf5 @ 1
[ 3.629047] initcall tty_init+0x0/0xf5 returned 0 after 9615 usecs
[ 3.629969] calling pty_init+0x0/0x336 @ 1
[ 3.640297] initcall pty_init+0x0/0x336 returned 0 after 251 usecs
[ 3.641271] calling sysrq_init+0x0/0x25 @ 1
[ 3.641271] initcall sysrq_init+0x0/0x25 returned 0 after 14 usecs
[ 3.641271] calling xen_hvc_init+0x0/0xde @ 1
[ 3.641271] alloc irq_desc for 750 on node -1
[ 3.641271] alloc kstat_irqs on node -1
[ 3.673104] initcall xen_hvc_init+0x0/0xde returned 0 after 10224 usecs
[ 3.674077] calling hpet_init+0x0/0x6a @ 1
[ 3.684918] initcall hpet_init+0x0/0x6a returned 0 after 374 usecs
[ 3.685894] calling nvram_init+0x0/0x82 @ 1
[ 3.696145] Non-volatile memory driver v1.3
[ 3.697115] initcall nvram_init+0x0/0x82 returned 0 after 4513 usecs
[ 3.697115] calling mod_init+0x0/0x220 @ 1
[ 3.697115] initcall mod_init+0x0/0x220 returned -19 after 445 usecs
[ 3.697115] calling mod_init+0x0/0xba @ 1
[ 3.697115] initcall mod_init+0x0/0xba returned -19 after 57 usecs
[ 3.697115] calling mod_init+0x0/0x4d @ 1
[ 3.697115] initcall mod_init+0x0/0x4d returned -19 after 0 usecs
[ 3.697115] calling agp_init+0x0/0x26 @ 1
[ 3.697115] Linux agpgart interface v0.103
[ 3.697115] initcall agp_init+0x0/0x26 returned 0 after 4277 usecs
[ 3.697115] calling agp_intel_init+0x0/0x29 @ 1
[ 3.761259] initcall agp_intel_init+0x0/0x29 returned 0 after 376 usecs
[ 3.762229] calling drm_core_init+0x0/0x12d @ 1
[ 3.773290] [drm] Initialized drm 1.1.0 20060810
[ 3.774241] initcall drm_core_init+0x0/0x12d returned 0 after 4950 usecs
[ 3.774241] calling i915_init+0x0/0x52 @ 1
[ 3.774241] initcall i915_init+0x0/0x52 returned 0 after 413 usecs
[ 3.774241] calling cn_proc_init+0x0/0x3d @ 1
[ 3.774241] initcall cn_proc_init+0x0/0x3d returned 0 after 2 usecs
[ 3.774241] calling serial8250_init+0x0/0x143 @ 1
[ 3.774241] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.825959] initcall serial8250_init+0x0/0x143 returned 0 after 7329 usecs
[ 3.826934] calling serial8250_pnp_init+0x0/0x12 @ 1
[ 3.839178] initcall serial8250_pnp_init+0x0/0x12 returned 0 after 618 usecs
[ 3.840153] calling serial8250_pci_init+0x0/0x1b @ 1
[ 3.852121] initcall serial8250_pci_init+0x0/0x1b returned 0 after 176 usecs
[ 3.853092] calling topology_sysfs_init+0x0/0x50 @ 1
[ 3.853092] initcall topology_sysfs_init+0x0/0x50 returned 0 after 28 usecs
[ 3.853092] calling brd_init+0x0/0x1a6 @ 1
[ 3.882651] brd: module loaded
[ 3.883606] initcall brd_init+0x0/0x1a6 returned 0 after 9042 usecs
[ 3.883606] calling loop_init+0x0/0x1b3 @ 1
[ 3.900238] loop: module loaded
[ 3.901194] initcall loop_init+0x0/0x1b3 returned 0 after 6358 usecs
[ 3.901194] calling xlblk_init+0x0/0x7a @ 1
[ 3.915028] initcall xlblk_init+0x0/0x7a returned 0 after 136 usecs
[ 3.916003] calling mac_hid_init+0x0/0x8e @ 1
[ 3.926584] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 3.927559] initcall mac_hid_init+0x0/0x8e returned 0 after 8413 usecs
[ 3.927559] calling spi_transport_init+0x0/0x79 @ 1
[ 3.947384] initcall spi_transport_init+0x0/0x79 returned 0 after 234 usecs
[ 3.948359] calling init_sd+0x0/0x142 @ 1
[ 3.959363] initcall init_sd+0x0/0x142 returned 0 after 275 usecs
[ 3.960307] calling init_sr+0x0/0x46 @ 1
[ 3.970214] initcall init_sr+0x0/0x46 returned 0 after 130 usecs
[ 3.971189] calling init_sg+0x0/0x125 @ 1
[ 3.981101] initcall init_sg+0x0/0x125 returned 0 after 163 usecs
[ 3.982030] calling ahci_init+0x0/0x1b @ 1
[ 3.992182] initcall ahci_init+0x0/0x1b returned 0 after 180 usecs
[ 3.993152] calling piix_init+0x0/0x29 @ 1
[ 3.993152] ata_piix 0000:00:1f.2: version 2.13
[ 3.993152] xen: registering gsi 17 triggering 0 polarity 1
[ 3.993152] alloc irq_desc for 17 on node 0
[ 3.993152] alloc kstat_irqs on node 0
[ 4.022817] xen: --> irq=17
(XEN) IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb8 -> IRQ 17 Mode:1 Active:1)
[ 4.032755] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.033745] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 4.196149] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 4.202560] scsi0 : ata_piix
[ 4.206169] scsi1 : ata_piix
[ 4.212151] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30d0 irq 14
[ 4.212305] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30d8 irq 15
[ 4.226906] c(XEN) IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc0 -> IRQ 18 Mode:1 Active:1)
alling 2_async_port_probe+0x0/0xb3 @ 782
[ 4.226922] xen: registering gsi 18 triggering 0 polarity 1
[ 4.226931] alloc irq_desc for 18 on node 0
[ 4.226935] alloc kstat_irqs on node 0
[ 4.226942] xen: --> irq=18
[ 4.235170] ata_piix 0000:00:1f.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.235189] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 4.235270] calling 3_async_port_probe+0x0/0xb3 @ 610
[ 4.377143] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 4.383525] scsi2 : ata_piix
[ 4.387115] scsi3 : ata_piix
[ 4.391576] ata3: SATA max UDMA/133 cmd 0x3428 ctl 0x341c bmdma 0x30f0 irq 18
[ 4.391576] ata4: SATA max UDMA/133 cmd 0x3420 ctl 0x3418 bmdma 0x30f8 irq 18
[ 4.407300] calling 4_async_port_probe+0x0/0xb3 @ 789
[ 4.407367] initcall piix_init+0x0/0x29 returned 0 after 394728 usecs
[ 4.407374] calling amd_init+0x0/0x1b @ 1
[ 4.407533] initcall amd_init+0x0/0x1b returned 0 after 149 usecs
[ 4.407538] calling mpiix_init+0x0/0x1b @ 1
[ 4.407686] initcall mpiix_init+0x0/0x1b returned 0 after 138 usecs
[ 4.407691] calling oldpiix_init+0x0/0x1b @ 1
[ 4.407835] initcall oldpiix_init+0x0/0x1b returned 0 after 135 usecs
[ 4.407840] calling sch_init+0x0/0x1b @ 1
[ 4.407987] initcall sch_init+0x0/0x1b returned 0 after 137 usecs
[ 4.407991] calling ata_generic_init+0x0/0x1b @ 1
[ 4.408143] initcall ata_generic_init+0x0/0x1b returned 0 after 142 usecs
[ 4.408148] calling e1000_init_module+0x0/0x87 @ 1
[ 4.408152] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 4.408156] Copyright (c) 1999-2006 Intel Corporation.
[ 4.408328] initcall e1000_init_module+0x0/0x87 returned 0 after 169 usecs
[ 4.408333] calling e1000_init_module+0x0/0x6b @ 1
[ 4.408337] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 4.408340] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 4.408504] initcall e1000_init_module+0x0/0x6b returned 0 after 160 usecs
[ 4.408509] calling ne2k_pci_init+0x0/0x1b @ 1
[ 4.408659] initcall ne2k_pci_init+0x0/0x1b returned 0 after 141 usecs
[ 4.408664] calling e100_init_module+0x0/0x5d @ 1
[ 4.408668] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 4.408672] e100: Copyright(c) 1999-2006 Intel Corporation
[ 4.408818] initcall e100_init_module+0x0/0x5d returned 0 after 144 usecs
[ 4.408823] calling tg3_init+0x0/0x1b @ 1
[ 4.408868] tg3.c:v3.102 (September 1, 2009)
[ 4.408902] xen: registering gsi 16 triggering 0 polarity 1
[ 4.408906] xen_allocate_pirq: returning irq 16 for gsi 16
[ 4.408910] xen: --> irq=16
[ 4.408915] Already setup the GSI :16
[ 4.408920] tg3 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.408940] tg3 0000:03:00.0: setting latency timer to 64
[ 4.602023] calling 5_async_port_probe+0x0/0xb3 @ 790
[ 4.612890] eth0: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:1b:fc:80:39:53
[ 4.613304] eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 4.613304] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 4.613304] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.642877] initcall tg3_init+0x0/0x1b returned 0 after 228562 usecs
[ 4.643847] calling bnx2_init+0x0/0x1b @ 1
[ 4.654215] initcall bnx2_init+0x0/0x1b returned 0 after 169 usecs
[ 4.655185] calling sky2_init_module+0x0/0x29 @ 1
[ 4.655185] sky2 driver version 1.25
[ 4.669829] initcall sky2_init_module+0x0/0x29 returned 0 after 3915 usecs
[ 4.670800] calling net_olddevs_init+0x0/0x9e @ 1
[ 4.670800] initcall net_olddevs_init+0x0/0x9e returned 0 after 4 usecs
[ 4.670800] calling init_nic+0x0/0x1b @ 1
[ 4.693657] initcall init_nic+0x0/0x1b returned 0 after 157 usecs
[ 4.694627] calling netif_init+0x0/0x66 @ 1
[ 4.694627] initcall netif_init+0x0/0x66 returned 0 after 0 usecs
[ 4.694627] calling rtl8139_init_module+0x0/0x1b @ 1
[ 4.716603] initcall rtl8139_init_module+0x0/0x1b returned 0 after 176 usecs
[ 4.717573] calling tun_init+0x0/0x93 @ 1
[ 4.717573] tun: Universal TUN/TAP device driver, 1.6
[ 4.717573] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 4.740411] initcall tun_init+0x0/0x93 returned 0 after 11739 usecs
[ 4.741385] calling rtl8169_init_module+0x0/0x1b @ 1
[ 4.752535] initcall rtl8169_init_module+0x0/0x1b returned 0 after 159 usecs
[ 4.753503] calling init_netconsole+0x0/0x22d @ 1
[ 4.753503] console [netcon0] enabled
[ 4.753503] netconsole: network logging started
[ 4.753503] initcall init_netconsole+0x0/0x22d returned 0 after 8554 usecs
[ 4.753503] calling cdrom_init+0x0/0x6a @ 1
[ 4.753503] initcall cdrom_init+0x0/0x6a returned 0 after 152 usecs
[ 4.753503] calling nonstatic_sysfs_init+0x0/0x12 @ 1
[ 4.753503] initcall nonstatic_sysfs_init+0x0/0x12 returned 0 after 1 usecs
[ 4.753503] calling yenta_socket_init+0x0/0x1b @ 1
[ 4.810463] initcall yenta_socket_init+0x0/0x1b returned 0 after 172 usecs
[ 4.811433] calling mon_init+0x0/0x104 @ 1
[ 4.822466] initcall mon_init+0x0/0x104 returned 0 after 295 usecs
[ 4.823439] calling ehci_hcd_init+0x0/0xe7 @ 1
[ 4.823439] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.823439] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 4.823439] xen: registering gsi 16 triggering 0 polarity 1
[ 4.823439] xen_allocate_pirq: returning irq 16 for gsi 16
[ 4.823439] xen: --> irq=16
[ 4.861811] Already setup the GSI :16
[ 4.862799] ehci_hcd 0000:00:1a.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.873272] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.874253] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.885017] drivers/usb/core/inode.c: creating file 'devices'
[ 4.885993] drivers/usb/core/inode.c: creating file '001'
[ 4.896991] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.897965] ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4
[ 4.897965] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 4.897965] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.913056] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.924693] async_waiting @ 789
[ 4.897965] ehci_hcd 0000:00:1a.7: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
[ 4.952159] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.952303] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 4.952303] ehci_hcd 0000:00:1a.7: irq 16, io mem 0xd2304000
[ 4.952303] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 4.952303] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 4.999350] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 5.005507] usb usb1: default language 0x0409
[ 5.010199] usb usb1: udev 1, busnum 1, minor = 0
[ 5.011168] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.009056] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 5.019787] ata2.01: SATA link down (SStatus 4 SControl 300)
[ 5.019968] async_waiting @ 610
[ 5.019961] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.019961] usb usb1: Product: EHCI Host Controller
[ 5.019961] usb usb1: Manufacturer: Linux 2.6.32.28 ehci_hcd
[ 5.019961] usb usb1: SerialNumber: 0000:00:1a.7
[ 5.061770] usb usb1: usb_probe_device
[ 5.062736] usb usb1: configuration #1 chosen from 1 choice
[ 5.071713] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 5.075162] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.078621] ata4.00: ATAPI: HL-DT-STDVD-RAM GSA-H30L, 1.06, max UDMA/100
[ 5.084605] ata4.00: configured for UDMA/100
[ 5.085541] async_waiting @ 790
[ 5.099525] hub 1-0:1.0: usb_probe_interface
[ 5.100490] hub 1-0:1.0: usb_probe_interface - got id
[ 5.100490] hub 1-0:1.0: USB hub found
[ 5.118855] hub 1-0:1.0: 4 ports detected
[ 5.119836] hub 1-0:1.0: standalone hub
[ 5.119836] hub 1-0:1.0: no power switching (usb 1.0)
[ 5.119836] hub 1-0:1.0: individual port over-current protection
[ 5.119836] hub 1-0:1.0: power on to power good time: 20ms
[ 5.144770] hub 1-0:1.0: local power source is good
[ 5.145748] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 5.157259] drivers/usb/core/inode.c: creating file '001'
[ 5.163075] xen: registering gsi 16 triggering 0 polarity 1
[ 5.164012] xen_allocate_pirq: returning irq 16 for gsi 16
[ 5.170208] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.170243] ata1.01: SATA link down (SStatus 4 SControl 300)
[ 5.173866] ata1.00: ATA-7: Hitachi HDS721616PLA380, P22OABBA, max UDMA/100
[ 5.173871] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.179889] ata1.00: configured for UDMA/100
[ 5.179910] async_waiting @ 782
[ 5.179915] async_continuing @ 782 after 0 usec
[ 5.180101] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
[ 5.180934] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.181125] initcall 2_async_port_probe+0x0/0xb3 returned 0 after 884363 usecs
[ 5.181143] calling 6_sd_probe_async+0x0/0x1db @ 782
[ 5.181180] async_continuing @ 610 after 157429 usec
[ 5.181186] initcall 3_async_port_probe+0x0/0xb3 returned 0 after 923741 usecs
[ 5.181203] async_continuing @ 789 after 250494 usec
[ 5.181209] initcall 4_async_port_probe+0x0/0xb3 returned 0 after 565743 usecs
[ 5.181238] async_continuing @ 790 after 93449 usec
[ 5.181459] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 5.181641] sd 0:0:0:0: [sda] Write Protect is off
[ 5.181646] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.181738] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.180677] xen: --> irq=16
[ 5.304484] Already setup the GSI :16
[ 5.305467] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.315958] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT
[ 5.316445] sda:
[ 5.316638] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.316649] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.316660] drivers/usb/core/inode.c: creating file '002'
[ 5.316841] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 5.316852] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 5.316902] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 5.320002] scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H30L 1.06 PQ: 0 ANSI: 5
[ 5.320119] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.320129] ehci_hcd 0000:00:1d.7: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
[ 5.320968] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 5.320968] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 5.320968] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xd2304400
[ 5.320968] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 5.327943] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 5.331654] sda1 sda2 <
[ 5.333089] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.441462] hub 1-0:1.0: port 2: status 0501 change 0001
[ 5.441574] sda5sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.441681] Uniform CD-ROM driver Revision: 3.20
[ 5.441870] usb usb2: default language 0x0409
[ 5.441896] usb usb2: udev 1, busnum 2, minor = 128
[ 5.441900] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.441905] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.441909] usb usb2: Product: EHCI Host Controller
[ 5.441913] usb usb2: Manufacturer: Linux 2.6.32.28 ehci_hcd
[ 5.441916] usb usb2: SerialNumber: 0000:00:1d.7
[ 5.442320] usb usb2: usb_probe_device
[ 5.442325] usb usb2: configuration #1 chosen from 1 choice
[ 5.442342] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 5.442501] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 5.442648] hub 2-0:1.0: usb_probe_interface
[ 5.442652] hub 2-0:1.0: usb_probe_interface - got id
[ 5.442656] hub 2-0:1.0: USB hub found
[ 5.442706] hub 2-0:1.0: 6 ports detected
[ 5.442710] hub 2-0:1.0: standalone hub
[ 5.442713] hub 2-0:1.0: no power switching (usb 1.0)
[ 5.442716] hub 2-0:1.0: individual port over-current protection
[ 5.442720] hub 2-0:1.0: power on to power good time: 20ms
[ 5.442737] hub 2-0:1.0: local power source is good
[ 5.442741] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 5.442839] drivers/usb/core/inode.c: creating file '001'
[ 5.443188] initcall ehci_hcd_init+0x0/0xe7 returned 0 after 595093 usecs
[ 5.443194] calling ohci_hcd_mod_init+0x0/0xba @ 1
[ 5.443198] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.443201] ohci_hcd: block sizes: ed 80 td 96
[ 5.443365] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 5.443513] initcall ohci_hcd_mod_init+0x0/0xba returned 0 after 305 usecs
[ 5.443519] calling uhci_hcd_init+0x0/0x11d @ 1
[ 5.443522] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.443708] initcall 5_async_port_probe+0x0/0xb3 returned 0 after 816633 usecs
[ 5.443825] xen: registering gsi 16 triggering 0 polarity 1
[ 5.443829] xen_allocate_pirq: returning irq 16 for gsi 16
[ 5.443833] xen: --> irq=16
[ 5.443839] Already setup the GSI :16
[ 5.443843] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.443862] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5.443872] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 5.443885] drivers/usb/core/inode.c: creating file '003'
[ 5.444078] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 5.444092] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 5.444105] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 5.444109] uhci_hcd 0000:00:1a.0: Performing full reset
[ 5.444135] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 5.444149] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003000
[ 5.446762] usb usb3: default language 0x0409
[ 5.446788] usb usb3: udev 1, busnum 3, minor = 256
[ 5.446792] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.446796] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.446800] usb usb3: Product: UHCI Host Controller
[ 5.446804] usb usb3: Manufacturer: Linux 2.6.32.28 uhci_hcd
[ 5.446807] usb usb3: SerialNumber: 0000:00:1a.0
[ 5.447035] usb usb3: usb_probe_device
[ 5.447040] usb usb3: configuration #1 chosen from 1 choice
[ 5.447072] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 5.447233] hub 3-0:1.0: usb_probe_interface
[ 5.447237] hub 3-0:1.0: usb_probe_interface - got id
[ 5.447241] hub 3-0:1.0: USB hub found
[ 5.448345] hub 3-0:1.0: 2 ports detected
[ 5.448349] hub 3-0:1.0: standalone hub
[ 5.448352] hub 3-0:1.0: no power switching (usb 1.0)
[ 5.448355] hub 3-0:1.0: individual port over-current protection
[ 5.448359] hub 3-0:1.0: power on to power good time: 2ms
[ 5.448376] hub 3-0:1.0: local power source is good
[ 5.448380] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 5.448432] drivers/usb/core/inode.c: creating file '001'
[ 5.448526] xen: registering gsi 17 triggering 0 polarity 1
[ 5.448530] xen_allocate_pirq: returning irq 17 for gsi 17
[ 5.448534] xen: --> irq=17
[ 5.448539] Already setup the GSI :17
[ 5.448544] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.448561] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 5.448571] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 5.448581] drivers/usb/core/inode.c: creating file '004'
[ 5.448768] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 5.448781] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 5.448795] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 5.448799] uhci_hcd 0000:00:1a.1: Performing full reset
[ 5.448825] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[ 5.448870] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00003020
[ 5.452557] usb usb4: default language 0x0409
[ 5.452582] usb usb4: udev 1, busnum 4, minor = 384
[ 5.452586] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.452590] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.452594] usb usb4: Product: UHCI Host Controller
[ 5.452598] usb usb4: Manufacturer: Linux 2.6.32.28 uhci_hcd
[ 5.452602] usb usb4: SerialNumber: 0000:00:1a.1
[ 5.452861] usb usb4: usb_probe_device
[ 5.452865] usb usb4: configuration #1 chosen from 1 choice
[ 5.452881] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 5.453032] hub 4-0:1.0: usb_probe_interface
[ 5.453036] hub 4-0:1.0: usb_probe_interface - got id
[ 5.453040] hub 4-0:1.0: USB hub found
[ 5.453883] hub 4-0:1.0: 2 ports detected
[ 5.453887] hub 4-0:1.0: standalone hub
[ 5.453890] hub 4-0:1.0: no power switching (usb 1.0)
[ 5.453894] hub 4-0:1.0: individual port over-current protection
[ 5.453897] hub 4-0:1.0: power on to power good time: 2ms
[ 5.453914] hub 4-0:1.0: local power source is good
[ 5.453918] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 5.453970] drivers/usb/core/inode.c: creating file '001'
[ 5.454073] xen: registering gsi 16 triggering 0 polarity 1
[ 5.454077] xen_allocate_pirq: returning irq 16 for gsi 16
[ 5.454081] xen: --> irq=16
[ 5.454134] Already setup the GSI :16
[ 5.454138] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.454157] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.454167] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.454177] drivers/usb/core/inode.c: creating file '005'
[ 5.454362] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 5.454375] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 5.454389] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 5.454393] uhci_hcd 0000:00:1d.0: Performing full reset
[ 5.454420] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 5.454433] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003040
[ 5.454979] usb usb5: default language 0x0409
[ 5.455004] usb usb5: udev 1, busnum 5, minor = 512
[ 5.455008] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.455012] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.455016] usb usb5: Product: UHCI Host Controller
[ 5.455020] usb usb5: Manufacturer: Linux 2.6.32.28 uhci_hcd
[ 5.455023] usb usb5: SerialNumber: 0000:00:1d.0
[ 5.455269] usb usb5: usb_probe_device
[ 5.455274] usb usb5: configuration #1 chosen from 1 choice
[ 5.455289] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 5.455443] hub 5-0:1.0: usb_probe_interface
[ 5.455447] hub 5-0:1.0: usb_probe_interface - got id
[ 5.455450] hub 5-0:1.0: USB hub found
[ 5.455477] hub 5-0:1.0: 2 ports detected
[ 5.455481] hub 5-0:1.0: standalone hub
[ 5.455485] hub 5-0:1.0: no power switching (usb 1.0)
[ 5.455488] hub 5-0:1.0: individual port over-current protection
[ 5.455492] hub 5-0:1.0: power on to power good time: 2ms
[ 5.455508] hub 5-0:1.0: local power source is good
[ 5.455512] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 5.455567] drivers/usb/core/inode.c: creating file '001'
[ 5.455659] xen: registering gsi 17 triggering 0 polarity 1
[ 5.455663] xen_allocate_pirq: returning irq 17 for gsi 17
[ 5.455666] xen: --> irq=17
[ 5.455672] Already setup the GSI :17
[ 5.455676] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.455694] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.455703] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.455715] drivers/usb/core/inode.c: creating file '006'
[ 5.455902] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 5.455916] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 5.455929] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 5.455933] uhci_hcd 0000:00:1d.1: Performing full reset
[ 5.455961] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 5.455974] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00003060
[ 5.459644] sda6
[ 5.459784] usb usb6: default language 0x0409
[ 5.459809] usb usb6: udev 1, busnum 6, minor = 640
[ 5.459813] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.459818] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.459822] usb usb6: Product: UHCI Host Controller
[ 5.459825] usb usb6: Manufacturer: Linux 2.6.32.28 uhci_hcd
[ 5.459829] usb usb6: SerialNumber: 0000:00:1d.1
[ 5.460063] usb usb6: usb_probe_device
[ 5.460067] usb usb6: configuration #1 chosen from 1 choice
[ 5.460101] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 5.460251] hub 6-0:1.0: usb_probe_interface
[ 5.460255] hub 6-0:1.0: usb_probe_interface - got id
[ 5.460259] hub 6-0:1.0: USB hub found
[ 5.460299] hub 6-0:1.0: 2 ports detected
[ 5.460303] hub 6-0:1.0: standalone hub
[ 5.460306] hub 6-0:1.0: no power switching (usb 1.0)
[ 5.460309] hub 6-0:1.0: individual port over-current protection
[ 5.460313] hub 6-0:1.0: power on to power good time: 2ms
[ 5.460329] hub 6-0:1.0: local power source is good
[ 5.460333] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 5.460388] drivers/usb/core/inode.c: creating file '001'
[ 5.460480] xen: registering gsi 18 triggering 0 polarity 1
[ 5.460484] xen_allocate_pirq: returning irq 18 for gsi 18
[ 5.460488] xen: --> irq=18
[ 5.460493] Already setup the GSI :18
[ 5.460498] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.460515] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.460526] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.460535] drivers/usb/core/inode.c: creating file '007'
[ 5.460717] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 5.460731] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 5.460745] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 5.460749] uhci_hcd 0000:00:1d.2: Performing full reset
[ 5.460777] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 5.460790] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003080
[ 5.464587] usb usb7: default language 0x0409
[ 5.464612] usb usb7: udev 1, busnum 7, minor = 768
[ 5.464616] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.464620] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.464624] usb usb7: Product: UHCI Host Controller
[ 5.464628] usb usb7: Manufacturer: Linux 2.6.32.28 uhci_hcd
[ 5.464632] usb usb7: SerialNumber: 0000:00:1d.2
[ 5.464856] usb usb7: usb_probe_device
[ 5.464860] usb usb7: configuration #1 chosen from 1 choice
[ 5.464876] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 5.465037] hub 7-0:1.0: usb_probe_interface
[ 5.465041] hub 7-0:1.0: usb_probe_interface - got id
[ 5.465045] hub 7-0:1.0: USB hub found
[ 5.465089] hub 7-0:1.0: 2 ports detected
[ 5.465093] hub 7-0:1.0: standalone hub
[ 5.465096] hub 7-0:1.0: no power switching (usb 1.0)
[ 5.465099] hub 7-0:1.0: individual port over-current protection
[ 5.465103] hub 7-0:1.0: power on to power good time: 2ms
[ 5.465120] hub 7-0:1.0: local power source is good
[ 5.465124] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 5.465177] drivers/usb/core/inode.c: creating file '001'
[ 5.465394] initcall uhci_hcd_init+0x0/0x11d returned 0 after 21354 usecs
[ 5.465400] calling usblp_init+0x0/0x1b @ 1
[ 5.465545] usbcore: registered new interface driver usblp
[ 5.465553] initcall usblp_init+0x0/0x1b returned 0 after 144 usecs
[ 5.465558] calling usb_stor_init+0x0/0x50 @ 1
[ 5.465561] Initializing USB Mass Storage driver...
[ 5.465722] usbcore: registered new interface driver usb-storage
[ 5.465728] USB Mass Storage support registered.
[ 5.465735] initcall usb_stor_init+0x0/0x50 returned 0 after 167 usecs
[ 5.465740] calling usb_usual_init+0x0/0x3d @ 1
[ 5.465902] usbcore: registered new interface driver libusual
[ 5.465910] initcall usb_usual_init+0x0/0x3d returned 0 after 161 usecs
[ 5.465915] calling i8042_init+0x0/0x3a7 @ 1
[ 5.466430] PNP: No PS/2 controller found. Probing ports directly.
[ 5.469340] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.469340] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.469589] initcall i8042_init+0x0/0x3a7 returned 0 after 3581 usecs
[ 5.469594] calling serport_init+0x0/0x34 @ 1
[ 5.469600] initcall serport_init+0x0/0x34 returned 0 after 1 usecs
[ 5.469605] calling mousedev_init+0x0/0x62 @ 1
[ 5.469879] mice: PS/2 mouse device common for all mice
[ 5.469885] initcall mousedev_init+0x0/0x62 returned 0 after 268 usecs
[ 5.469890] calling evdev_init+0x0/0x12 @ 1
[ 5.470322] initcall evdev_init+0x0/0x12 returned 0 after 415 usecs
[ 5.470327] calling atkbd_init+0x0/0x27 @ 1
[ 5.470456] initcall atkbd_init+0x0/0x27 returned 0 after 120 usecs
[ 5.470461] calling psmouse_init+0x0/0x6f @ 1
[ 5.470659] initcall psmouse_init+0x0/0x6f returned 0 after 186 usecs
[ 5.470664] calling xenkbd_init+0x0/0x5d @ 1
[ 5.470669] initcall xenkbd_init+0x0/0x5d returned -19 after 0 usecs
[ 5.470673] calling cmos_init+0x0/0x6a @ 1
[ 5.470726] rtc_cmos 00:04: RTC can wake from S4
[ 5.470910] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 5.470964] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 5.471101] initcall cmos_init+0x0/0x6a returned 0 after 411 usecs
[ 5.471106] calling i2c_i801_init+0x0/0x1b @ 1
[ 5.471164] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 5.471175] xen: registering gsi 17 triggering 0 polarity 1
[ 5.471180] xen_allocate_pirq: returning irq 17 for gsi 17
[ 5.471183] xen: --> irq=17
[ 5.471189] Already setup the GSI :17
[ 5.471193] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.471498] initcall i2c_i801_init+0x0/0x1b returned 0 after 377 usecs
[ 5.471504] calling xen_wdt_init_module+0x0/0x74 @ 1
[ 5.471507] wdt: Xen WatchDog Timer Driver v0.01
[ 5.471893] wdt: initialized (timeout=60s, nowayout=0)
[ 5.471903] initcall xen_wdt_init_module+0x0/0x74 returned 0 after 384 usecs
[ 5.471908] calling dm_init+0x0/0x46 @ 1
[ 5.472658] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 5.472665] initcall dm_init+0x0/0x46 returned 0 after 733 usecs
[ 5.472670] calling dm_mirror_init+0x0/0x79 @ 1
[ 5.472849] initcall dm_mirror_init+0x0/0x79 returned 0 after 168 usecs
[ 5.472854] calling dm_dirty_log_init+0x0/0x59 @ 1
[ 5.472861] initcall dm_dirty_log_init+0x0/0x59 returned 0 after 2 usecs
[ 5.472866] calling dm_zero_init+0x0/0x31 @ 1
[ 5.472871] initcall dm_zero_init+0x0/0x31 returned 0 after 0 usecs
[ 5.472876] calling cpufreq_gov_dbs_init+0x0/0xab @ 1
[ 5.472996] initcall cpufreq_gov_dbs_init+0x0/0xab returned 0 after 111 usecs
[ 5.473001] calling init_ladder+0x0/0x12 @ 1
[ 5.473006] cpuidle: using governor ladder
[ 5.473011] initcall init_ladder+0x0/0x12 returned 0 after 4 usecs
[ 5.473016] calling init_menu+0x0/0x12 @ 1
[ 5.473019] cpuidle: using governor menu
[ 5.473024] initcall init_menu+0x0/0x12 returned 0 after 3 usecs
[ 5.473029] calling efivars_init+0x0/0x1ef @ 1
[ 5.473034] initcall efivars_init+0x0/0x1ef returned -19 after 0 usecs
[ 5.473039] calling hid_init+0x0/0x66 @ 1
[ 5.473289] initcall hid_init+0x0/0x66 returned 0 after 238 usecs
[ 5.473294] calling a4_init+0x0/0x1b @ 1
[ 5.473417] initcall a4_init+0x0/0x1b returned 0 after 114 usecs
[ 5.473422] calling apple_init+0x0/0x39 @ 1
[ 5.473552] initcall apple_init+0x0/0x39 returned 0 after 120 usecs
[ 5.473557] calling belkin_init+0x0/0x1b @ 1
[ 5.473681] initcall belkin_init+0x0/0x1b returned 0 after 115 usecs
[ 5.473686] calling ch_init+0x0/0x1b @ 1
[ 5.473804] initcall ch_init+0x0/0x1b returned 0 after 109 usecs
[ 5.473809] calling ch_init+0x0/0x1b @ 1
[ 5.473927] initcall ch_init+0x0/0x1b returned 0 after 109 usecs
[ 5.473931] calling cp_init+0x0/0x1b @ 1
[ 5.474049] initcall cp_init+0x0/0x1b returned 0 after 109 usecs
[ 5.474056] calling dr_init+0x0/0x1b @ 1
[ 5.474187] initcall dr_init+0x0/0x1b returned 0 after 122 usecs
[ 5.474192] calling ez_init+0x0/0x1b @ 1
[ 5.474310] initcall ez_init+0x0/0x1b returned 0 after 109 usecs
[ 5.474315] calling gyration_init+0x0/0x1b @ 1
[ 5.474434] initcall gyration_init+0x0/0x1b returned 0 after 109 usecs
[ 5.474439] calling ks_init+0x0/0x1b @ 1
[ 5.474560] initcall ks_init+0x0/0x1b returned 0 after 112 usecs
[ 5.474565] calling kye_init+0x0/0x1b @ 1
[ 5.474687] initcall kye_init+0x0/0x1b returned 0 after 112 usecs
[ 5.474692] calling lg_init+0x0/0x1b @ 1
[ 5.474812] initcall lg_init+0x0/0x1b returned 0 after 111 usecs
[ 5.474817] calling ms_init+0x0/0x1b @ 1
[ 5.474938] initcall ms_init+0x0/0x1b returned 0 after 112 usecs
[ 5.474943] calling mr_init+0x0/0x1b @ 1
[ 5.475076] initcall mr_init+0x0/0x1b returned 0 after 123 usecs
[ 5.475081] calling ntrig_init+0x0/0x1b @ 1
[ 5.475202] initcall ntrig_init+0x0/0x1b returned 0 after 112 usecs
[ 5.475207] calling pl_init+0x0/0x1b @ 1
[ 5.475328] initcall pl_init+0x0/0x1b returned 0 after 112 usecs
[ 5.475333] calling pl_init+0x0/0x1b @ 1
[ 5.475451] initcall pl_init+0x0/0x1b returned 0 after 109 usecs
[ 5.475456] calling samsung_init+0x0/0x1b @ 1
[ 5.475574] initcall samsung_init+0x0/0x1b returned 0 after 109 usecs
[ 5.475579] calling sjoy_init+0x0/0x1b @ 1
[ 5.475700] initcall sjoy_init+0x0/0x1b returned 0 after 111 usecs
[ 5.475705] calling sony_init+0x0/0x1b @ 1
[ 5.475826] initcall sony_init+0x0/0x1b returned 0 after 112 usecs
[ 5.475831] calling sp_init+0x0/0x1b @ 1
[ 5.475956] initcall sp_init+0x0/0x1b returned 0 after 116 usecs
[ 5.475961] calling ga_init+0x0/0x1b @ 1
[ 5.476097] initcall ga_init+0x0/0x1b returned 0 after 126 usecs
[ 5.476102] calling tm_init+0x0/0x1b @ 1
[ 5.476221] initcall tm_init+0x0/0x1b returned 0 after 110 usecs
[ 5.476226] calling ts_init+0x0/0x1b @ 1
[ 5.476347] initcall ts_init+0x0/0x1b returned 0 after 112 usecs
[ 5.476352] calling twinhan_init+0x0/0x1b @ 1
[ 5.476470] initcall twinhan_init+0x0/0x1b returned 0 after 109 usecs
[ 5.476475] calling zp_init+0x0/0x1b @ 1
[ 5.476594] initcall zp_init+0x0/0x1b returned 0 after 109 usecs
[ 5.476599] calling hid_init+0x0/0xc7 @ 1
[ 5.476919] usbcore: registered new interface driver hiddev
[ 5.477080] usbcore: registered new interface driver usbhid
[ 5.477086] usbhid: v2.6:USB HID core driver
[ 5.477092] initcall hid_init+0x0/0xc7 returned 0 after 476 usecs
[ 5.477097] calling eeepc_laptop_init+0x0/0x41 @ 1
[ 5.477408] initcall eeepc_laptop_init+0x0/0x41 returned -19 after 297 usecs
[ 5.477414] calling init_soundcore+0x0/0x95 @ 1
[ 5.477531] initcall init_soundcore+0x0/0x95 returned 0 after 108 usecs
[ 5.477536] calling alsa_sound_init+0x0/0x95 @ 1
[ 5.477589] Advanced Linux Sound Architecture Driver Version 1.0.21.
[ 5.477595] initcall alsa_sound_init+0x0/0x95 returned 0 after 51 usecs
[ 5.477600] calling alsa_hwdep_init+0x0/0x64 @ 1
[ 5.477612] initcall alsa_hwdep_init+0x0/0x64 returned 0 after 6 usecs
[ 5.477617] calling alsa_timer_init+0x0/0x15c @ 1
[ 5.477771] initcall alsa_timer_init+0x0/0x15c returned 0 after 144 usecs
[ 5.477776] calling snd_hrtimer_init+0x0/0xf7 @ 1
[ 5.477783] initcall snd_hrtimer_init+0x0/0xf7 returned 0 after 1 usecs
[ 5.477788] calling alsa_pcm_init+0x0/0x6c @ 1
[ 5.477799] initcall alsa_pcm_init+0x0/0x6c returned 0 after 6 usecs
[ 5.477804] calling snd_mem_init+0x0/0x2c @ 1
[ 5.477815] initcall snd_mem_init+0x0/0x2c returned 0 after 5 usecs
[ 5.477820] calling alsa_mixer_oss_init+0x0/0x3c @ 1
[ 5.477825] initcall alsa_mixer_oss_init+0x0/0x3c returned 0 after 0 usecs
[ 5.477830] calling alsa_pcm_oss_init+0x0/0x87 @ 1
[ 5.477837] initcall alsa_pcm_oss_init+0x0/0x87 returned 0 after 1 usecs
[ 5.477842] calling alsa_seq_init+0x0/0x4c @ 1
[ 5.478001] initcall alsa_seq_init+0x0/0x4c returned 0 after 149 usecs
[ 5.478006] calling alsa_seq_device_init+0x0/0x5b @ 1
[ 5.478017] initcall alsa_seq_device_init+0x0/0x5b returned 0 after 5 usecs
[ 5.478022] calling alsa_seq_midi_event_init+0x0/0x8 @ 1
[ 5.478028] initcall alsa_seq_midi_event_init+0x0/0x8 returned 0 after 0 usecs
[ 5.478033] calling alsa_seq_oss_init+0x0/0x167 @ 1
[ 5.482886] sda7initcall alsa_seq_oss_init+0x0/0x167 returned 0 after 12326 usecs
[ 5.490669] calling alsa_seq_dummy_init+0x0/0xbd @ 1
[ 5.490691] initcall alsa_seq_dummy_init+0x0/0xbd returned 0 after 15 usecs
[ 5.490696] calling patch_realtek_init+0x0/0x12 @ 1
[ 5.490702] initcall patch_realtek_init+0x0/0x12 returned 0 after 0 usecs
[ 5.490707] calling patch_cmedia_init+0x0/0x12 @ 1
[ 5.490712] initcall patch_cmedia_init+0x0/0x12 returned 0 after 0 usecs
[ 5.490717] calling patch_analog_init+0x0/0x12 @ 1
[ 5.490723] initcall patch_analog_init+0x0/0x12 returned 0 after 0 usecs
[ 5.490728] calling patch_sigmatel_init+0x0/0x12 @ 1
[ 5.490733] initcall patch_sigmatel_init+0x0/0x12 returned 0 after 0 usecs
[ 5.490739] calling patch_si3054_init+0x0/0x12 @ 1
[ 5.490744] initcall patch_si3054_init+0x0/0x12 returned 0 after 0 usecs
[ 5.490749] calling patch_atihdmi_init+0x0/0x12 @ 1
[ 5.490754] initcall patch_atihdmi_init+0x0/0x12 returned 0 after 0 usecs
[ 5.490759] calling patch_cirrus_init+0x0/0x12 @ 1
[ 5.490765] initcall patch_cirrus_init+0x0/0x12 returned 0 after 0 usecs
[ 5.490770] calling patch_ca0110_init+0x0/0x12 @ 1
[ 5.490775] initcall patch_ca0110_init+0x0/0x12 returned 0 after 0 usecs
[ 5.490780] calling patch_conexant_init+0x0/0x12 @ 1
[ 5.490786] initcall patch_conexant_init+0x0/0x12 returned 0 after 0 usecs
[ 5.490790] calling patch_via_init+0x0/0x12 @ 1
[ 5.490795] initcall patch_via_init+0x0/0x12 returned 0 after 0 usecs
[ 5.490800] calling patch_nvhdmi_init+0x0/0x12 @ 1
[ 5.490804] initcall patch_nvhdmi_init+0x0/0x12 returned 0 after 0 usecs
[ 5.490809] calling patch_intelhdmi_init+0x0/0x12 @ 1
[ 5.490814] initcall patch_intelhdmi_init+0x0/0x12 returned 0 after 0 usecs
[ 5.490818] calling alsa_card_azx_init+0x0/0x1b @ 1
[ 5.490903] xen: registering gsi 16 triggering 0 polarity 1
[ 5.490907] xen_allocate_pirq: returning irq 16 for gsi 16
[ 5.490911] xen: --> irq=16
[ 5.490917] Already setup the GSI :16
[ 5.490922] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.490982] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.502051] sda8 sda9 >
[ 6.454092] usb usb4: suspend_rh (auto-stop)
[ 6.704091] usb usb5: suspend_rh (auto-stop)
[ 6.704129] usb usb6: suspend_rh (auto-stop)
[ 7.720754] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
[ 7.722239] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.722249] initcall 6_sd_probe_async+0x0/0x1db returned 0 after 2481539 usecs
[ 7.742302] hub 2-0:1.0: port 6: status 0501 change 0001
[ 7.747995] uhci_hcd 0000:00:1a.0: port 2 portsc 008a,00
[ 7.753742] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 7.760069] initcall alsa_card_azx_init+0x0/0x1b returned 0 after 2216057 usecs
[ 7.760793] uhci_hcd 0000:00:1d.2: port 2 portsc 008a,00
[ 7.760841] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 7.760849] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 7.764520] calling alsa_sound_last_init+0x0/0x6f @ 1
[ 7.764520] ALSA device list:
[ 7.764520] #0: HDA Intel at 0xd2300000 irq 16
[ 7.764520] initcall alsa_sound_last_init+0x0/0x6f returned 0 after 7940 usecs
[ 7.764520] calling flow_cache_init+0x0/0x1a7 @ 1
[ 7.764520] initcall flow_cache_init+0x0/0x1a7 returned 0 after 40 usecs
[ 7.764520] calling llc_init+0x0/0x20 @ 1
[ 7.764520] initcall llc_init+0x0/0x20 returned 0 after 1 usecs
[ 7.764520] calling snap_init+0x0/0x39 @ 1
[ 7.764520] initcall snap_init+0x0/0x39 returned 0 after 1 usecs
[ 7.764520] calling rif_init+0x0/0x85 @ 1
[ 7.764520] initcall rif_init+0x0/0x85 returned 0 after 69 usecs
[ 7.847093] hub 2-0:1.0: state 7 ports 6 chg 0040 evt 0000
[ 7.847110] hub 2-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
[ 7.847123] ehci_hcd 0000:00:1d.7: port 6 low speed --> companion
[ 7.764520] calling blackhole_module_init+0x0/0x12 @ 1
[ 7.764520] initcall blackhole_module_init+0x0/0x12 returned 0 after 0 usecs
[ 7.764520] calling nfnetlink_init+0x0/0x60 @ 1
[ 7.764520] Netfilter messages via NETLINK v0.30.
[ 7.892864] initcall nfnetlink_init+0x0/0x60 returned 0 after 5147 usecs
[ 7.898084] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
[ 7.898134] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 7.898151] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 7.898160] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 7.898175] uhci_hcd 0000:00:1d.2: port 2 portsc 01a3,00
[ 7.898194] hub 7-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[ 7.893602] calling nfnetlink_log_init+0x0/0xd6 @ 1
[ 7.893602] initcall nfnetlink_log_init+0x0/0xd6 returned 0 after 14 usecs
[ 7.893602] calling nf_conntrack_standalone_init+0x0/0x12 @ 1
[ 7.893602] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 7.964045] initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after 6927 usecs
[ 7.964762] calling ctnetlink_init+0x0/0x76 @ 1
[ 7.964762] ctnetlink v0.93: registering with nfnetlink.
[ 7.964762] initcall ctnetlink_init+0x0/0x76 returned 0 after 5491 usecs
[ 7.964762] calling nf_conntrack_ftp_init+0x0/0x1dc @ 1
[ 7.964762] initcall nf_conntrack_ftp_init+0x0/0x1dc returned 0 after 2 usecs
[ 8.002091] hub 7-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[ 7.964762] calling nf_conntrack_irc_init+0x0/0x1a8 @ 1
[ 7.964762] initcall nf_conntrack_irc_init+0x0/0x1a8 returned 0 after 1 usecs
[ 7.964762] calling nf_conntrack_sip_init+0x0/0x183 @ 1
[ 7.964762] initcall nf_conntrack_sip_init+0x0/0x183 returned 0 after 0 usecs
[ 7.964762] calling xt_init+0x0/0x13b @ 1
[ 7.964762] initcall xt_init+0x0/0x13b returned 0 after 1 usecs
[ 7.964762] calling tcpudp_mt_init+0x0/0x17 @ 1
[ 7.964762] initcall tcpudp_mt_init+0x0/0x17 returned 0 after 1 usecs
[ 7.964762] calling connsecmark_tg_init+0x0/0x12 @ 1
[ 7.964762] initcall connsecmark_tg_init+0x0/0x12 returned 0 after 0 usecs
[ 7.964762] calling mark_tg_init+0x0/0x12 @ 1
[ 7.964762] initcall mark_tg_init+0x0/0x12 returned 0 after 0 usecs
[ 7.964762] calling nflog_tg_init+0x0/0x12 @ 1
[ 7.964762] initcall nflog_tg_init+0x0/0x12 returned 0 after 0 usecs
[ 7.964762] calling secmark_tg_init+0x0/0x12 @ 1
[ 8.104084] usb 7-2: new low speed USB device using uhci_hcd and address 2
[ 7.964762] initcall secmark_tg_init+0x0/0x12 returned 0 after 0 usecs
[ 7.964762] calling tcpmss_tg_init+0x0/0x17 @ 1
[ 7.964762] initcall tcpmss_tg_init+0x0/0x17 returned 0 after 0 usecs
[ 7.964762] calling conntrack_mt_init+0x0/0x17 @ 1
[ 7.964762] initcall conntrack_mt_init+0x0/0x17 returned 0 after 0 usecs
[ 7.964762] calling mark_mt_init+0x0/0x12 @ 1
[ 7.964762] initcall mark_mt_init+0x0/0x12 returned 0 after 0 usecs
[ 7.964762] calling policy_mt_init+0x0/0x17 @ 1
[ 7.964762] initcall policy_mt_init+0x0/0x17 returned 0 after 0 usecs
[ 7.964762] calling state_mt_init+0x0/0x17 @ 1
[ 7.964762] initcall state_mt_init+0x0/0x17 returned 0 after 0 usecs
[ 7.964762] calling sysctl_ipv4_init+0x0/0x4e @ 1
[ 7.964762] initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 1970 usecs
[ 7.964762] calling init_syncookies+0x0/0x19 @ 1
[ 7.964762] initcall init_syncookies+0x0/0x19 returned 0 after 35 usecs
[ 7.964762] calling tunnel4_init+0x0/0x66 @ 1
[ 7.964762] initcall tunnel4_init+0x0/0x66 returned 0 after 1 usecs
[ 7.964762] calling ipv4_netfilter_init+0x0/0x12 @ 1
[ 7.964762] initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 0 usecs
[ 7.964762] calling nf_conntrack_l3proto_ipv4_init+0x0/0x14b @ 1
[ 8.236200] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x14b returned 0 after 1312 usecs
[ 8.236881] calling nf_nat_init+0x0/0x118 @ 1
[ 8.245602] usb 7-2: skipped 1 descriptor after interface
[ 8.250596] usb 7-2: default language 0x0409
[ 8.236881] initcall nf_nat_init+0x0/0x118 returned 0 after 23 usecs
[ 8.236881] calling nf_defrag_init+0x0/0x17 @ 1
[ 8.270594] usb 7-2: udev 2, busnum 7, minor = 769
[ 8.270598] usb 7-2: New USB device found, idVendor=04b3, idProduct=3025
[ 8.270603] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.270607] usb 7-2: Product: USB NetVista Full Width Keyboard
[ 8.270611] usb 7-2: Manufacturer: CHICONY
[ 8.270835] usb 7-2: usb_probe_device
[ 8.270841] usb 7-2: configuration #1 chosen from 1 choice
[ 8.273597] usb 7-2: adding 7-2:1.0 (config #1, interface 0)
[ 8.273757] usbhid 7-2:1.0: usb_probe_interface
[ 8.273761] usbhid 7-2:1.0: usb_probe_interface - got id
[ 8.290792] input: CHICONY USB NetVista Full Width Keyboard as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input3
[ 8.290813] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 8.291122] generic-usb 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB NetVista Full Width Keyboard] on usb-0000:00:1d.2-2/input0
[ 8.291197] drivers/usb/core/inode.c: creating file '002'
[ 8.291247] hub 1-0:1.0: state 7 ports 4 chg 0004 evt 0000
[ 8.291264] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 8.291277] ehci_hcd 0000:00:1a.7: port 2 low speed --> companion
[ 8.342081] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
[ 8.342130] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0004
[ 8.401812] initcall nf_defrag_init+0x0/0x17 returned 0 after 46 usecs
[ 8.402766] calling nf_nat_ftp_init+0x0/0x21 @ 1
[ 8.402766] initcall nf_nat_ftp_init+0x0/0x21 returned 0 after 0 usecs
[ 8.402766] calling nf_nat_irc_init+0x0/0x21 @ 1
[ 8.402766] initcall nf_nat_irc_init+0x0/0x21 returned 0 after 0 usecs
[ 8.402766] calling nf_nat_sip_init+0x0/0x9e @ 1
[ 8.402766] initcall nf_nat_sip_init+0x0/0x9e returned 0 after 0 usecs
[ 8.402766] calling ip_tables_init+0x0/0xb8 @ 1
[ 8.402766] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.454117] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 8.454133] uhci_hcd 0000:00:1a.0: port 2 portsc 01a3,00
[ 8.454153] hub 3-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[ 8.402766] initcall ip_tables_init+0x0/0xb8 returned 0 after 23093 usecs
[ 8.402766] calling iptable_filter_init+0x0/0x69 @ 1
[ 8.402766] initcall iptable_filter_init+0x0/0x69 returned 0 after 7 usecs
[ 8.402766] calling iptable_mangle_init+0x0/0x41 @ 1
[ 8.402766] initcall iptable_mangle_init+0x0/0x41 returned 0 after 5 usecs
[ 8.402766] calling nf_nat_standalone_init+0x0/0x82 @ 1
[ 8.402766] initcall nf_nat_standalone_init+0x0/0x82 returned 0 after 5 usecs
[ 8.402766] calling log_tg_init+0x0/0x29 @ 1
[ 8.402766] initcall log_tg_init+0x0/0x29 returned 0 after 1 usecs
[ 8.402766] calling masquerade_tg_init+0x0/0x39 @ 1
[ 8.402766] initcall masquerade_tg_init+0x0/0x39 returned 0 after 3 usecs
[ 8.402766] calling reject_tg_init+0x0/0x12 @ 1
[ 8.402766] initcall reject_tg_init+0x0/0x12 returned 0 after 0 usecs
[ 8.402766] calling ulog_tg_init+0x0/0xf4 @ 1
[ 8.558089] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[ 8.566310] initcall ulog_tg_init+0x0/0xf4 returned 0 after 25 usecs
[ 8.567292] calling cubictcp_register+0x0/0x5c @ 1
[ 8.567292] TCP cubic registered
[ 8.567292] initcall cubictcp_register+0x0/0x5c returned 0 after 3405 usecs
[ 8.567292] calling xfrm_user_init+0x0/0x4a @ 1
[ 8.567292] Initializing XFRM netlink socket
[ 8.598476] initcall xfrm_user_init+0x0/0x4a returned 0 after 4466 usecs
[ 8.599462] calling inet6_init+0x0/0x2a6 @ 1
[ 8.611075] NET: Registered protocol family 10
[ 8.622104] initcall inet6_init+0x0/0x2a6 returned 0 after 11648 usecs
[ 8.622304] calling ah6_init+0x0/0x66 @ 1
[ 8.622304] initcall ah6_init+0x0/0x66 returned 0 after 1 usecs
[ 8.622304] calling esp6_init+0x0/0x66 @ 1
[ 8.622304] initcall esp6_init+0x0/0x66 returned 0 after 1 usecs
[ 8.622304] calling xfrm6_transport_init+0x0/0x17 @ 1
[ 8.622304] initcall xfrm6_transport_init+0x0/0x17 returned 0 after 0 usecs
[ 8.660086] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 8.622304] calling xfrm6_mode_tunnel_init+0x0/0x17 @ 1
[ 8.622304] initcall xfrm6_mode_tunnel_init+0x0/0x17 returned 0 after 0 usecs
[ 8.622304] calling xfrm6_beet_init+0x0/0x17 @ 1
[ 8.622304] initcall xfrm6_beet_init+0x0/0x17 returned 0 after 0 usecs
[ 8.622304] calling ip6_tables_init+0x0/0xb8 @ 1
[ 8.622304] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.622304] initcall ip6_tables_init+0x0/0xb8 returned 0 after 5595 usecs
[ 8.622304] calling ip6table_filter_init+0x0/0x69 @ 1
[ 8.622304] initcall ip6table_filter_init+0x0/0x69 returned 0 after 7 usecs
[ 8.622304] calling ip6table_mangle_init+0x0/0x41 @ 1
[ 8.622304] initcall ip6table_mangle_init+0x0/0x41 returned 0 after 7 usecs
[ 8.622304] calling nf_conntrack_l3proto_ipv6_init+0x0/0x11a @ 1
[ 8.622304] initcall nf_conntrack_l3proto_ipv6_init+0x0/0x11a returned 0 after 191 usecs
[ 8.622304] calling ipv6header_mt6_init+0x0/0x12 @ 1
[ 8.622304] initcall ipv6header_mt6_init+0x0/0x12 returned 0 after 0 usecs
[ 8.622304] calling log_tg6_init+0x0/0x29 @ 1
[ 8.622304] initcall log_tg6_init+0x0/0x29 returned 0 after 0 usecs
[ 8.622304] calling reject_tg6_init+0x0/0x12 @ 1
[ 8.622304] initcall reject_tg6_init+0x0/0x12 returned 0 after 0 usecs
[ 8.622304] calling sit_init+0x0/0x71 @ 1
[ 8.622304] IPv6 over IPv4 tunneling driver
[ 8.801788] usb 3-2: skipped 1 descriptor after interface
[ 8.802655] initcall sit_init+0x0/0x71 returned 0 after 8145 usecs
[ 8.802661] calling packet_init+0x0/0x47 @ 1
[ 8.802665] NET: Registered protocol family 17
[ 8.802679] initcall packet_init+0x0/0x47 returned 0 after 12 usecs
[ 8.802683] calling br_init+0x0/0xad @ 1
[ 8.802713] initcall br_init+0x0/0xad returned 0 after 23 usecs
[ 8.802717] calling init_rpcsec_gss+0x0/0x4d @ 1
[ 8.802755] initcall init_rpcsec_gss+0x0/0x4d returned 0 after 32 usecs
[ 8.802760] calling init_kerberos_module+0x0/0x2f @ 1
[ 8.802773] initcall init_kerberos_module+0x0/0x2f returned 0 after 7 usecs
[ 8.802778] calling mce_debugfs_init+0x0/0x3c @ 1
[ 8.802808] initcall mce_debugfs_init+0x0/0x3c returned 0 after 24 usecs
[ 8.802813] calling severities_debugfs_init+0x0/0x3c @ 1
[ 8.802826] initcall severities_debugfs_init+0x0/0x3c returned 0 after 7 usecs
[ 8.802830] calling acpi_cpufreq_init+0x0/0x10d @ 1
[ 8.802860] initcall acpi_cpufreq_init+0x0/0x10d returned -19 after 24 usecs
[ 8.802865] calling hpet_insert_resource+0x0/0x23 @ 1
[ 8.802870] initcall hpet_insert_resource+0x0/0x23 returned 1 after 0 usecs
[ 8.802875] initcall hpet_insert_resource+0x0/0x23 returned with error code 1
[ 8.802880] calling update_mp_table+0x0/0x5f9 @ 1
[ 8.802885] initcall update_mp_table+0x0/0x5f9 returned 0 after 0 usecs
[ 8.802890] calling lapic_insert_resource+0x0/0x3f @ 1
[ 8.802895] initcall lapic_insert_resource+0x0/0x3f returned -1 after 0 usecs
[ 8.802901] initcall lapic_insert_resource+0x0/0x3f returned with error code -1
[ 8.802906] calling init_lapic_nmi_sysfs+0x0/0x39 @ 1
[ 8.802911] initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 0 usecs
[ 8.802916] calling io_apic_bug_finalize+0x0/0x1b @ 1
[ 8.802921] initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs
[ 8.802926] calling check_early_ioremap_leak+0x0/0x65 @ 1
[ 8.802932] initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs
[ 8.802937] calling pat_memtype_list_init+0x0/0x29 @ 1
[ 8.802951] initcall pat_memtype_list_init+0x0/0x29 returned 0 after 8 usecs
[ 8.802957] calling init_oops_id+0x0/0x31 @ 1
[ 8.802968] initcall init_oops_id+0x0/0x31 returned 0 after 6 usecs
[ 8.802973] calling disable_boot_consoles+0x0/0x45 @ 1
[ 8.802979] initcall disable_boot_consoles+0x0/0x45 returned 0 after 0 usecs
[ 8.802983] calling pm_qos_power_init+0x0/0xca @ 1
[ 9.039271] initcall pm_qos_power_init+0x0/0xca returned 0 after 230743 usecs
[ 9.043780] usb 3-2: default language 0x0409
[ 9.040203] calling software_resume+0x0/0x1fc @ 1
[ 9.040203] PM: Resume from disk failed.
[ 9.058782] usb 3-2: udev 2, busnum 3, minor = 257
[ 9.058786] usb 3-2: New USB device found, idVendor=093a, idProduct=2510
[ 9.058790] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.058795] usb 3-2: Product: USB OPTICAL MOUSE
[ 9.058798] usb 3-2: Manufacturer: PIXART
[ 9.059021] usb 3-2: usb_probe_device
[ 9.059026] usb 3-2: configuration #1 chosen from 1 choice
[ 9.071784] usb 3-2: adding 3-2:1.0 (config #1, interface 0)
[ 9.071959] usbhid 3-2:1.0: usb_probe_interface
[ 9.071963] usbhid 3-2:1.0: usb_probe_interface - got id
[ 9.088473] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input4
[ 9.088914] generic-usb 0003:093A:2510.0002: input,hidraw1: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.0-2/input0
[ 9.088988] drivers/usb/core/inode.c: creating file '002'
[ 9.089036] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 9.088859] initcall software_resume+0x0/0x1fc returned -2 after 96982 usecs
[ 9.088859] initcall software_resume+0x0/0x1fc returned with error code -2
[ 9.088859] calling debugfs_kprobe_init+0x0/0x8a @ 1
[ 9.175909] initcall debugfs_kprobe_init+0x0/0x8a returned 0 after 67 usecs
[ 9.176843] calling taskstats_init+0x0/0x95 @ 1
[ 9.176843] registered taskstats version 1
[ 9.176843] initcall taskstats_init+0x0/0x95 returned 0 after 4281 usecs
[ 9.176843] calling clear_boot_tracer+0x0/0x2d @ 1
[ 9.176843] initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs
[ 9.176843] calling max_swapfiles_check+0x0/0x8 @ 1
[ 9.176843] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
[ 9.176843] calling random32_reseed+0x0/0xb3 @ 1
[ 9.176843] initcall random32_reseed+0x0/0xb3 returned 0 after 16 usecs
[ 9.176843] calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
[ 9.176843] initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 4 usecs
[ 9.176843] calling pci_sysfs_init+0x0/0x51 @ 1
[ 9.257325] initcall pci_sysfs_init+0x0/0x51 returned 0 after 905 usecs
[ 9.257977] calling boot_wait_for_devices+0x0/0x30 @ 1
[ 9.257977] initcall boot_wait_for_devices+0x0/0x30 returned 0 after 2 usecs
[ 9.257977] calling seqgen_init+0x0/0xf @ 1
[ 9.257977] initcall seqgen_init+0x0/0xf returned 0 after 16 usecs
[ 9.257977] calling late_resume_init+0x0/0x11f @ 1
[ 9.257977] Magic number: 11:981:352
[ 9.257977] initcall late_resume_init+0x0/0x11f returned 0 after 4007 usecs
[ 9.257977] calling scsi_complete_async_scans+0x0/0x167 @ 1
[ 9.257977] initcall scsi_complete_async_scans+0x0/0x167 returned 0 after 0 usecs
[ 9.257977] calling memmap_init+0x0/0xa3 @ 1
[ 9.323726] initcall memmap_init+0x0/0xa3 returned 0 after 115 usecs
[ 9.324660] calling pci_mmcfg_late_insert_resources+0x0/0x15f @ 1
[ 9.324660] initcall pci_mmcfg_late_insert_resources+0x0/0x15f returned 0 after 3 usecs
[ 9.324660] calling tcp_congestion_default+0x0/0x12 @ 1
[ 9.324660] initcall tcp_congestion_default+0x0/0x12 returned 0 after 1 usecs
[ 9.324660] calling ip_auto_config+0x0/0xd55 @ 1
[ 9.324660] initcall ip_auto_config+0x0/0xd55 returned 0 after 8 usecs
[ 9.324660] calling initialize_hashrnd+0x0/0x19 @ 1
[ 9.324660] initcall initialize_hashrnd+0x0/0x19 returned 0 after 5 usecs
[ 9.382966] async_waiting @ 1
[ 9.383949] async_continuing @ 1 after 0 usec
[ 9.383949] Freeing unused kernel memory: 596k freed
[ 9.383949] Write protecting the kernel read-only data: 8620k
Loading, please wait...
mount: mounting none on /dev failed: No such device
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs) [ 10.704146] hub 4-0:1.0: hub_suspend
[ 10.708047] usb usb4: bus auto-suspend
[ 10.709019] usb usb4: suspend_rh
[ 10.715657] hub 5-0:1.0: hub_suspend
[ 10.719542] usb usb5: bus auto-suspend
[ 10.720525] usb usb5: suspend_rh
[ 10.727128] hub 6-0:1.0: hub_suspend
[ 10.731012] usb usb6: bus auto-suspend
[ 10.731995] usb usb6: suspend_rh
[ 10.738575] hub 2-0:1.0: hub_suspend
[ 10.742440] usb usb2: bus auto-suspend
[ 10.743426] ehci_hcd 0000:00:1d.7: suspend root hub
[ 10.751686] hub 1-0:1.0: hub_suspend
[ 10.755550] usb usb1: bus auto-suspend
[ 10.756535] ehci_hcd 0000:00:1a.7: suspend root hub
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: pvops Domain 0 Creased when boot Xen-unstable on Ubuntu10.04
2011-05-17 15:27 ` Bei Guan
@ 2011-05-17 15:34 ` Ian Campbell
2011-05-17 15:48 ` Bei Guan
0 siblings, 1 reply; 14+ messages in thread
From: Ian Campbell @ 2011-05-17 15:34 UTC (permalink / raw)
To: Bei Guan; +Cc: Xen Devel, Andrei Warkentin, Konrad Rzeszutek Wilk
On Tue, 2011-05-17 at 16:27 +0100, Bei Guan wrote:
>
>
> 2011/5/17 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> > menuentry "Ubuntu_Xen 4.2 (2.6.32.28)" {
> > recordfail
> > insmod ext2
> > set root='(hd0,9)'
> > search --no-floppy --fs-uuid --set
> 59c64afa-47a8-4a5f-a4cf-dbe3be20cc15
> > multiboot /boot/xen.gz dom0_mem=1024M loglvl=all
> guest_loglvl=all
> > sync_console console_to_ring com1=115200,8n1 console=com1
> lapic=debug
> > apic_verbosity=debug apic=debug iommu=off
> > module /boot/vmlinuz-2.6.32.28 nopat
> > root=UUID=59c64afa-47a8-4a5f-a4cf-dbe3be20cc15 ro
> console=tty0
> > console=ttyS0,115200n8 console=hvc0 earlyprintk=xen
> nomodeset initcall_debug
> > debug loglevel=10
> > module /boot/initrd.img-2.6.32.28
> > }
> >
> > In the debug, there is message like this:
> >
> > Loading, please wait...
> > mount: mounting none on /dev failed: No such device
>
>
>
> So your /dev/sda is being seen. Not sure why the UUID hasn't
> been read, but
> you could do 'root=/dev/sdaX' where X is the correct root
> partition.
>
> This would replace the 'UUID=59...'.
>
> I just tried this. Because the /dev/sda9 is the root fs, so I used
> 'root=/dev/sda9' to replace the original one. But it also the same
> error as the following. Detailed is also attached.
>
>
> Loading, please wait...
> mount: mounting none on /dev failed: No such device
This is trying to mount something on /dev, presumably a TMPFS or
DEVTMPFS or similar, this fails which apparently cascades into not
finding the disk.
I suggest you have a dig into your initramfs and try and figure out what
specifically it is trying to do and what requirements your distro has
put on the kernel configuration.
You appear to be getting dumped into a debug shell within the initramfs
so you can quite easily have a poke around and see what's going on I
think.
Ian.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: pvops Domain 0 Creased when boot Xen-unstable on Ubuntu10.04
2011-05-17 15:34 ` Ian Campbell
@ 2011-05-17 15:48 ` Bei Guan
2011-05-17 15:49 ` Ian Campbell
0 siblings, 1 reply; 14+ messages in thread
From: Bei Guan @ 2011-05-17 15:48 UTC (permalink / raw)
To: Ian Campbell; +Cc: Xen Devel, Andrei Warkentin, Konrad Rzeszutek Wilk
[-- Attachment #1.1: Type: text/plain, Size: 2357 bytes --]
2011/5/17 Ian Campbell <Ian.Campbell@citrix.com>
> On Tue, 2011-05-17 at 16:27 +0100, Bei Guan wrote:
> >
> >
> > 2011/5/17 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> > > menuentry "Ubuntu_Xen 4.2 (2.6.32.28)" {
> > > recordfail
> > > insmod ext2
> > > set root='(hd0,9)'
> > > search --no-floppy --fs-uuid --set
> > 59c64afa-47a8-4a5f-a4cf-dbe3be20cc15
> > > multiboot /boot/xen.gz dom0_mem=1024M loglvl=all
> > guest_loglvl=all
> > > sync_console console_to_ring com1=115200,8n1 console=com1
> > lapic=debug
> > > apic_verbosity=debug apic=debug iommu=off
> > > module /boot/vmlinuz-2.6.32.28 nopat
> > > root=UUID=59c64afa-47a8-4a5f-a4cf-dbe3be20cc15 ro
> > console=tty0
> > > console=ttyS0,115200n8 console=hvc0 earlyprintk=xen
> > nomodeset initcall_debug
> > > debug loglevel=10
> > > module /boot/initrd.img-2.6.32.28
> > > }
> > >
> > > In the debug, there is message like this:
> > >
> > > Loading, please wait...
> > > mount: mounting none on /dev failed: No such device
> >
> >
> >
> > So your /dev/sda is being seen. Not sure why the UUID hasn't
> > been read, but
> > you could do 'root=/dev/sdaX' where X is the correct root
> > partition.
> >
> > This would replace the 'UUID=59...'.
> >
> > I just tried this. Because the /dev/sda9 is the root fs, so I used
> > 'root=/dev/sda9' to replace the original one. But it also the same
> > error as the following. Detailed is also attached.
> >
> >
> > Loading, please wait...
> > mount: mounting none on /dev failed: No such device
>
> This is trying to mount something on /dev, presumably a TMPFS or
> DEVTMPFS or similar, this fails which apparently cascades into not
> finding the disk.
>
> I suggest you have a dig into your initramfs and try and figure out what
> specifically it is trying to do and what requirements your distro has
> put on the kernel configuration.
>
> You appear to be getting dumped into a debug shell within the initramfs
> so you can quite easily have a poke around and see what's going on I
> think.
>
Sorry, can you give me more detail about how to do this? What command or
what others? Many thanks.
>
> Ian.
>
>
>
[-- Attachment #1.2: Type: text/html, Size: 3309 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: pvops Domain 0 Creased when boot Xen-unstable on Ubuntu10.04
2011-05-17 15:48 ` Bei Guan
@ 2011-05-17 15:49 ` Ian Campbell
2011-05-17 16:43 ` Bei Guan
0 siblings, 1 reply; 14+ messages in thread
From: Ian Campbell @ 2011-05-17 15:49 UTC (permalink / raw)
To: Bei Guan; +Cc: Xen Devel, Andrei Warkentin, Konrad Rzeszutek Wilk
On Tue, 2011-05-17 at 16:48 +0100, Bei Guan wrote:
>
>
> 2011/5/17 Ian Campbell <Ian.Campbell@citrix.com>
>
> On Tue, 2011-05-17 at 16:27 +0100, Bei Guan wrote:
> >
> >
> > 2011/5/17 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> > > menuentry "Ubuntu_Xen 4.2 (2.6.32.28)" {
> > > recordfail
> > > insmod ext2
> > > set root='(hd0,9)'
> > > search --no-floppy --fs-uuid --set
> > 59c64afa-47a8-4a5f-a4cf-dbe3be20cc15
> > > multiboot /boot/xen.gz dom0_mem=1024M
> loglvl=all
> > guest_loglvl=all
> > > sync_console console_to_ring com1=115200,8n1
> console=com1
> > lapic=debug
> > > apic_verbosity=debug apic=debug iommu=off
> > > module /boot/vmlinuz-2.6.32.28 nopat
> > > root=UUID=59c64afa-47a8-4a5f-a4cf-dbe3be20cc15 ro
> > console=tty0
> > > console=ttyS0,115200n8 console=hvc0
> earlyprintk=xen
> > nomodeset initcall_debug
> > > debug loglevel=10
> > > module /boot/initrd.img-2.6.32.28
> > > }
> > >
> > > In the debug, there is message like this:
> > >
> > > Loading, please wait...
> > > mount: mounting none on /dev failed: No such
> device
> >
> >
> >
> > So your /dev/sda is being seen. Not sure why the
> UUID hasn't
> > been read, but
> > you could do 'root=/dev/sdaX' where X is the correct
> root
> > partition.
> >
> > This would replace the 'UUID=59...'.
> >
> > I just tried this. Because the /dev/sda9 is the root fs, so
> I used
> > 'root=/dev/sda9' to replace the original one. But it also
> the same
> > error as the following. Detailed is also attached.
> >
> >
> > Loading, please wait...
> > mount: mounting none on /dev failed: No such device
>
>
> This is trying to mount something on /dev, presumably a TMPFS
> or
> DEVTMPFS or similar, this fails which apparently cascades into
> not
> finding the disk.
>
> I suggest you have a dig into your initramfs and try and
> figure out what
> specifically it is trying to do and what requirements your
> distro has
> put on the kernel configuration.
>
> You appear to be getting dumped into a debug shell within the
> initramfs
> so you can quite easily have a poke around and see what's
> going on I
> think.
>
>
> Sorry, can you give me more detail about how to do this? What command
> or what others? Many thanks.
It's a minimal Linux environment, you should have e.g. "ls" and "cat".
Try and find the mount command which is failing.
Ian.
>
>
>
>
> Ian.
>
>
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: pvops Domain 0 Creased when boot Xen-unstable on Ubuntu10.04
2011-05-17 15:49 ` Ian Campbell
@ 2011-05-17 16:43 ` Bei Guan
2011-05-17 21:40 ` Todd Deshane
0 siblings, 1 reply; 14+ messages in thread
From: Bei Guan @ 2011-05-17 16:43 UTC (permalink / raw)
To: Ian Campbell; +Cc: Xen Devel, Andrei Warkentin, Konrad Rzeszutek Wilk
[-- Attachment #1.1: Type: text/plain, Size: 3882 bytes --]
2011/5/17 Ian Campbell <Ian.Campbell@eu.citrix.com>
> On Tue, 2011-05-17 at 16:48 +0100, Bei Guan wrote:
> >
> >
> > 2011/5/17 Ian Campbell <Ian.Campbell@citrix.com>
> >
> > On Tue, 2011-05-17 at 16:27 +0100, Bei Guan wrote:
> > >
> > >
> > > 2011/5/17 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> > > > menuentry "Ubuntu_Xen 4.2 (2.6.32.28)" {
> > > > recordfail
> > > > insmod ext2
> > > > set root='(hd0,9)'
> > > > search --no-floppy --fs-uuid --set
> > > 59c64afa-47a8-4a5f-a4cf-dbe3be20cc15
> > > > multiboot /boot/xen.gz dom0_mem=1024M
> > loglvl=all
> > > guest_loglvl=all
> > > > sync_console console_to_ring com1=115200,8n1
> > console=com1
> > > lapic=debug
> > > > apic_verbosity=debug apic=debug iommu=off
> > > > module /boot/vmlinuz-2.6.32.28 nopat
> > > > root=UUID=59c64afa-47a8-4a5f-a4cf-dbe3be20cc15 ro
> > > console=tty0
> > > > console=ttyS0,115200n8 console=hvc0
> > earlyprintk=xen
> > > nomodeset initcall_debug
> > > > debug loglevel=10
> > > > module /boot/initrd.img-2.6.32.28
> > > > }
> > > >
> > > > In the debug, there is message like this:
> > > >
> > > > Loading, please wait...
> > > > mount: mounting none on /dev failed: No such
> > device
> > >
> > >
> > >
> > > So your /dev/sda is being seen. Not sure why the
> > UUID hasn't
> > > been read, but
> > > you could do 'root=/dev/sdaX' where X is the correct
> > root
> > > partition.
> > >
> > > This would replace the 'UUID=59...'.
> > >
> > > I just tried this. Because the /dev/sda9 is the root fs, so
> > I used
> > > 'root=/dev/sda9' to replace the original one. But it also
> > the same
> > > error as the following. Detailed is also attached.
> > >
> > >
> > > Loading, please wait...
> > > mount: mounting none on /dev failed: No such device
> >
> >
> > This is trying to mount something on /dev, presumably a TMPFS
> > or
> > DEVTMPFS or similar, this fails which apparently cascades into
> > not
> > finding the disk.
> >
> > I suggest you have a dig into your initramfs and try and
> > figure out what
> > specifically it is trying to do and what requirements your
> > distro has
> > put on the kernel configuration.
> >
> > You appear to be getting dumped into a debug shell within the
> > initramfs
> > so you can quite easily have a poke around and see what's
> > going on I
> > think.
> >
> >
> > Sorry, can you give me more detail about how to do this? What command
> > or what others? Many thanks.
>
> It's a minimal Linux environment, you should have e.g. "ls" and "cat".
> Try and find the mount command which is failing.
>
I did the following command to find the failed mount command. But, it seems
can't find that. So, is there any problem with my steps and what other work
can I do?
(initramfs) dmeg | grep mount
(initramfs)
(initramfs) cat /proc/mounts
rootfs / rootfs rw 0 0
none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
none /proc proc rw,nosuid,nodev,noexec,relatime 0 0
none /dev tmpfs rw,relatime,mode=755 0 0
none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620 0 0
(initramfs)
Thanks,
Bei Guan
>
> Ian.
> >
> >
> >
> >
> > Ian.
> >
> >
> >
>
>
>
[-- Attachment #1.2: Type: text/html, Size: 5424 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: pvops Domain 0 Creased when boot Xen-unstable on Ubuntu10.04
2011-05-17 16:43 ` Bei Guan
@ 2011-05-17 21:40 ` Todd Deshane
2011-05-18 7:13 ` Bei Guan
0 siblings, 1 reply; 14+ messages in thread
From: Todd Deshane @ 2011-05-17 21:40 UTC (permalink / raw)
To: Bei Guan; +Cc: Ian Campbell, Xen Devel, Andrei Warkentin, Konrad Rzeszutek Wilk
On Tue, May 17, 2011 at 12:43 PM, Bei Guan <gbtju85@gmail.com> wrote:
>
>> > You appear to be getting dumped into a debug shell within the
>> > initramfs
>> > so you can quite easily have a poke around and see what's
>> > going on I
>> > think.
>> >
>> >
>> > Sorry, can you give me more detail about how to do this? What command
>> > or what others? Many thanks.
>>
>> It's a minimal Linux environment, you should have e.g. "ls" and "cat".
>> Try and find the mount command which is failing.
>
> I did the following command to find the failed mount command. But, it seems
> can't find that. So, is there any problem with my steps and what other work
> can I do?
When you get dropped into the minimal (initramfs) prompt it gives you
some good suggestions.
For example. You can do "ls /dev" and "cat /proc/modules" and you can
probably even try to run a mount command maybe. You can also
double-check things like "cat /proc/cmdline", etc.
See if you can determine what devices in /dev are actually available,
such as your sda, hda, or xvda devices.
Hope that helps.
Thanks,
Todd
> (initramfs) dmeg | grep mount
> (initramfs)
> (initramfs) cat /proc/mounts
> rootfs / rootfs rw 0 0
> none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
> none /proc proc rw,nosuid,nodev,noexec,relatime 0 0
> none /dev tmpfs rw,relatime,mode=755 0 0
> none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620 0 0
> (initramfs)
>
> Thanks,
> Bei Guan
>
>>
>> Ian.
>> >
>> >
>> >
>> >
>> > Ian.
>> >
>> >
>> >
>>
>>
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
>
--
Todd Deshane
http://www.linkedin.com/in/deshantm
http://www.xen.org/products/cloudxen.html
http://runningxen.com/
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: pvops Domain 0 Creased when boot Xen-unstable on Ubuntu10.04
2011-05-17 21:40 ` Todd Deshane
@ 2011-05-18 7:13 ` Bei Guan
2011-05-18 7:25 ` Ian Campbell
0 siblings, 1 reply; 14+ messages in thread
From: Bei Guan @ 2011-05-18 7:13 UTC (permalink / raw)
To: Todd Deshane
Cc: Ian Campbell, Xen Devel, Andrei Warkentin, Konrad Rzeszutek Wilk
[-- Attachment #1.1: Type: text/plain, Size: 5978 bytes --]
2011/5/18 Todd Deshane <todd.deshane@xen.org>
> On Tue, May 17, 2011 at 12:43 PM, Bei Guan <gbtju85@gmail.com> wrote:
> >
> >> > You appear to be getting dumped into a debug shell within the
> >> > initramfs
> >> > so you can quite easily have a poke around and see what's
> >> > going on I
> >> > think.
> >> >
> >> >
> >> > Sorry, can you give me more detail about how to do this? What command
> >> > or what others? Many thanks.
> >>
> >> It's a minimal Linux environment, you should have e.g. "ls" and "cat".
> >> Try and find the mount command which is failing.
> >
> > I did the following command to find the failed mount command. But, it
> seems
> > can't find that. So, is there any problem with my steps and what other
> work
> > can I do?
>
> When you get dropped into the minimal (initramfs) prompt it gives you
> some good suggestions.
>
> For example. You can do "ls /dev" and "cat /proc/modules" and you can
> probably even try to run a mount command maybe. You can also
> double-check things like "cat /proc/cmdline", etc.
>
> See if you can determine what devices in /dev are actually available,
> such as your sda, hda, or xvda devices.
>
Some boot information got from initramfs is list below. It seems that the
/dev/sda9 is available, but there no drivers module in /proc/modules. I also
can't mount /dev/sda9 to other directory. So, what's the problem with it?
And if a device that need to be mount can't be found in the /dev, what
should I do to make it available?
(initramfs) cat /proc/cmdline
nopat root=/dev/sda9 ro console=tty0 console=ttyS0,115200n8 console=hvc0
earlyprintk=xen nomodeset initcall_debug debug loglevel=10
(initramfs) ls /dev
console ttyS1 hvc6 tty41
null ttyS2 hvc7 tty44
pts ttyS3 ptmx tty43
loop0 rtc0 tty bsg
block rtc tty0 sg1
loop1 hidraw0 tty1 tty46
loop3 ttyS0 tty10 tty45
loop4 cpu tty11 tty47
loop5 sda tty12 tty48
loop2 disk tty13 tty49
loop7 full tty14 tty5
ram10 kmem tty15 tty50
ram7 kmsg tty16 tty51
loop6 mem tty17 tty52
ram1 oldmem tty18 tty53
ram0 port tty19 tty54
ram13 random tty2 tty55
ram11 urandom tty20 tty56
ram3 zero tty21 tty57
ram12 autofs tty22 tty58
ram15 blktap-control tty23 tty59
ram14 cpu_dma_latency tty24 tty6
ram9 mapper tty26 tty60
ram2 mcelog tty27 tty62
ram5 hpet tty28 tty61
ram4 network_latency tty29 tty7
ram8 network_throughput tty3 tty63
ram6 rfkill tty30 tty9
input snapshot tty32 tty8
char net tty31 vcs
usbmon3 vga_arbiter tty25 usbmon0
bus watchdog sr0 vcsa
adsp nvram scd0 vcs1
audio xen tty35 vcsa1
dsp sequencer tty36 sda8
snd sequencer2 tty34 sda2
mixer hvc0 tty37 sda7
usbmon1 hvc1 tty33 sda5
usbmon4 hvc2 tty39 sda6
usbmon5 hidraw1 tty38 sda9
usbmon6 hvc3 tty4 sda1
usbmon7 hvc4 tty42
usbmon2 hvc5 tty40
(initramfs) cat /proc/modules
(initramfs)
(initramfs) mount -o /dev/sda9 /root
mount: cannot read /etc/fstab: No such file or directory
(initramfs) ls /etc
modprobe.d default lvm console-setup udev
(initramfs) fstype /dev/sda\b9
FSTYPE=ext4dev
FSSIZE=33738981376
(initramfs) ls /
dev lib64 var init conf scripts proc
root lib bin etc sbin sys tmp
Thanks
Bei Guan
>
> Hope that helps.
>
> Thanks,
> Todd
>
> > (initramfs) dmeg | grep mount
> > (initramfs)
> > (initramfs) cat /proc/mounts
> > rootfs / rootfs rw 0 0
> > none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
> > none /proc proc rw,nosuid,nodev,noexec,relatime 0 0
> > none /dev tmpfs rw,relatime,mode=755 0 0
> > none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620 0 0
> > (initramfs)
> >
> > Thanks,
> > Bei Guan
> >
> >>
> >> Ian.
> >> >
> >> >
> >> >
> >> >
> >> > Ian.
> >> >
> >> >
> >> >
> >>
> >>
> >
> >
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xensource.com
> > http://lists.xensource.com/xen-devel
> >
> >
>
>
>
> --
> Todd Deshane
> http://www.linkedin.com/in/deshantm
> http://www.xen.org/products/cloudxen.html
> http://runningxen.com/
>
[-- Attachment #1.2: Type: text/html, Size: 7977 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: pvops Domain 0 Creased when boot Xen-unstable on Ubuntu10.04
2011-05-18 7:13 ` Bei Guan
@ 2011-05-18 7:25 ` Ian Campbell
2011-05-18 7:43 ` Bei Guan
0 siblings, 1 reply; 14+ messages in thread
From: Ian Campbell @ 2011-05-18 7:25 UTC (permalink / raw)
To: Bei Guan; +Cc: Todd Deshane, Xen Devel, Andrei Warkentin, Konrad Rzeszutek Wilk
On Wed, 2011-05-18 at 08:13 +0100, Bei Guan wrote:
>
> Some boot information got from initramfs is list below. It seems that
> the /dev/sda9 is available, but there no drivers module
> in /proc/modules. I also can't mount /dev/sda9 to other directory. So,
> what's the problem with it? And if a device that need to be mount
> can't be found in the /dev, what should I do to make it available?
Do you have the appropriate filesystem support either configured
statically into your kernel or configured a module which has been placed
in the initramfs and is loaded as necessary?
Ian.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: pvops Domain 0 Creased when boot Xen-unstable on Ubuntu10.04
2011-05-18 7:25 ` Ian Campbell
@ 2011-05-18 7:43 ` Bei Guan
2011-05-18 8:11 ` Ian Campbell
0 siblings, 1 reply; 14+ messages in thread
From: Bei Guan @ 2011-05-18 7:43 UTC (permalink / raw)
To: Ian Campbell
Cc: Todd Deshane, Xen Devel, Andrei Warkentin, Konrad Rzeszutek Wilk
[-- Attachment #1.1: Type: text/plain, Size: 825 bytes --]
2011/5/18 Ian Campbell <Ian.Campbell@eu.citrix.com>
> On Wed, 2011-05-18 at 08:13 +0100, Bei Guan wrote:
> >
> > Some boot information got from initramfs is list below. It seems that
> > the /dev/sda9 is available, but there no drivers module
> > in /proc/modules. I also can't mount /dev/sda9 to other directory. So,
> > what's the problem with it? And if a device that need to be mount
> > can't be found in the /dev, what should I do to make it available?
>
> Do you have the appropriate filesystem support either configured
> statically into your kernel or configured a module which has been placed
> in the initramfs and is loaded as necessary?
>
Do you mean that the initramfs needs a configure file or module to load the
filesystem? And I need to give the configure file or module?
Thanks,
Bei Guan
>
> Ian.
>
>
[-- Attachment #1.2: Type: text/html, Size: 1390 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: pvops Domain 0 Creased when boot Xen-unstable on Ubuntu10.04
2011-05-18 7:43 ` Bei Guan
@ 2011-05-18 8:11 ` Ian Campbell
0 siblings, 0 replies; 14+ messages in thread
From: Ian Campbell @ 2011-05-18 8:11 UTC (permalink / raw)
To: Bei Guan; +Cc: Todd Deshane, Xen Devel, Andrei Warkentin, Konrad Rzeszutek Wilk
On Wed, 2011-05-18 at 08:43 +0100, Bei Guan wrote:
>
>
> 2011/5/18 Ian Campbell <Ian.Campbell@eu.citrix.com>
> On Wed, 2011-05-18 at 08:13 +0100, Bei Guan wrote:
> >
> > Some boot information got from initramfs is list below. It
> seems that
> > the /dev/sda9 is available, but there no drivers module
> > in /proc/modules. I also can't mount /dev/sda9 to other
> directory. So,
> > what's the problem with it? And if a device that need to be
> mount
> > can't be found in the /dev, what should I do to make it
> available?
>
>
> Do you have the appropriate filesystem support either
> configured
> statically into your kernel or configured a module which has
> been placed
> in the initramfs and is loaded as necessary?
> Do you mean that the initramfs needs a configure file or module to
> load the filesystem? And I need to give the configure file or module?
We are really getting into xen-users@ territory here since this is
clearly a user level configuration/understanding issue and not a Xen, or
even Linux, code problem.
You need to make sure that your kernel's .config includes support for
the your root filesystem. If that support is =m then you also need to
ensure the module is loaded by the initramfs, perhaps this will happen
automatically once your kernel config is correct otherwise you need to
consult your distro documentation.
Ian.
>
>
>
>
> Thanks,
> Bei Guan
>
>
>
>
> Ian.
>
>
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2011-05-18 8:11 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-05-16 17:42 pvops Domain 0 Creased when boot Xen-unstable on Ubuntu10.04 Bei Guan
2011-05-16 17:53 ` Konrad Rzeszutek Wilk
2011-05-17 14:39 ` Bei Guan
2011-05-17 14:44 ` Konrad Rzeszutek Wilk
2011-05-17 15:27 ` Bei Guan
2011-05-17 15:34 ` Ian Campbell
2011-05-17 15:48 ` Bei Guan
2011-05-17 15:49 ` Ian Campbell
2011-05-17 16:43 ` Bei Guan
2011-05-17 21:40 ` Todd Deshane
2011-05-18 7:13 ` Bei Guan
2011-05-18 7:25 ` Ian Campbell
2011-05-18 7:43 ` Bei Guan
2011-05-18 8:11 ` Ian Campbell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).