xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: veerasena reddy <veeruyours@gmail.com>
To: xen-devel@lists.xensource.com
Subject: How to share a page between dom0 and Hypervisror
Date: Mon, 6 Jun 2011 18:58:46 +0530	[thread overview]
Message-ID: <BANLkTimXLrw8L0gXz3Yo-JtZE34HiE7BBA@mail.gmail.com> (raw)


[-- Attachment #1.1: Type: text/plain, Size: 3842 bytes --]

Hi,

In one of experiments, I need to map a page allocated in dom0 to hypervisor
and access/modify the page contents in hypervisor.
I tried this by adding a new hypercall, and pass the GPA of the page to its
handler in hypervisor which does the following:

==================== Hypercall handler  ================
DO(my_rd_wr)(int cmd, XEN_GUEST_HANDLE(void) arg)
{
        unsigned long dom0_gpa;
        unsigned long gmfn;
        unsigned long mfn;
        void *my_rd_wr_page;
        struct domain *d = current->domain;

        printk(XENLOG_G_DEBUG "%s:L%u: Entered\n", __FUNCTION__, __LINE__);
        switch( cmd )
        {
                case 0x1:
                        if ( copy_from_guest(&dom0_gpa, arg, 1) )
                                return -EFAULT;
                        printk(XENLOG_G_DEBUG "%s:L%u: GPA read 0x%lx\n",
                                                __FUNCTION__, __LINE__,
dom0_gpa);

                        gmfn = dom0_gpa >> 12;
                        mfn = gmfn_to_mfn(d, gmfn);
                        if ( !mfn_valid(mfn) ||
                             !get_page_and_type(mfn_to_page(mfn), d,
PGT_writable_page) )
                        {
                                printk(XENLOG_G_WARNING
                                        "Bad GMFN %lx (MFN %lx)\n", gmfn,
mfn);
                                return 0;
                        }

                        my_rd_wr_page = map_domain_page(mfn);

                        /* Do your initialization of the page here; just
write '2' in all bytes */
                        memset(my_rd_wr_page, 2, 1<<12);

                        unmap_domain_page(my_rd_wr_page);
                        put_page_and_type(mfn_to_page(mfn));
                        break;

                default:
                        printk(XENLOG_G_DEBUG "%s:L%u: unhandled\n",
                                                __FUNCTION__, __LINE__);
                        break;
        }

        return 0;
}
============================

I have allocated a page from a sample dom0 kernel module (using vmalloc()),
and passed the physical address of it to hypercall.

void my_rd_wr_page_setup(void)
{
    unsigned long my_gpa;
    int err;
    char *my_rd_wr_page = NULL;

    my_rd_wr_page     = __vmalloc(
                        1 * PAGE_SIZE,
                        GFP_KERNEL | __GFP_HIGHMEM,
                        __pgprot(__PAGE_KERNEL & ~_PAGE_NX));

    my_gpa = vmalloc_to_pfn((char *)&my_rd_wr_page) << PAGE_SHIFT;
    printk("%s: Before Hypercall; my_rd_wr_page=%p my_gpa=%lx\n",
__FUNCTION__, my_rd_wr_page, my_gpa);
    memset(my_rd_wr_page, 0, PAGE_SIZE);
    err = _hypercall2(int, my_rd_wr, 0x1, (void *)&my_gpa);
    printk("%s: Hypercall returned; errno-%d\n", __FUNCTION__, err);
}


When I loaded the module, the following error has been observed:

=============== On dom0 ===========
xen_features[0].writable_page_tables = 0
xen_features[0].writable_descriptor_tables = 0
xen_features[0].auto_translated_physmap = 0
xen_features[0].supervisor_mode_kernel = 0
xen_features[0].pae_pgdir_above_4gb = 1
my_rd_wr_page_setup: Before Hypercall; my_rd_wr_page=ffffc90010f7e000
my_gpa=d7cf000
my_rd_wr_page_setup: Hypercall returned; errno-0
=====================================
On hypervisor:
(XEN) do_my_rd_wr:L178: GPA read 0xd7cf000
(XEN) mm.c:2037:d0 Error pfn d7cf: rd=ffff8300773c0000, od=0000000000000000,
caf=180000000000000, taf=0000000000000000
(XEN) Bad GMFN d7cf (MFN d7cf)
====================================

>From the dom0 messages (where i read the features), it looks like
writable_page_tables is not set. Is it causing the issue in my case.

Could you please advice if i did something wrong here.
You are most welcome if you have completely different approach which works;

Thanks a lot in advance

Regards,
VSR.

[-- Attachment #1.2: Type: text/html, Size: 4302 bytes --]

[-- Attachment #2: Type: text/plain, Size: 138 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

             reply	other threads:[~2011-06-06 13:28 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-06 13:28 veerasena reddy [this message]
2011-06-06 13:53 ` How to share a page between dom0 and Hypervisror Ian Campbell
2011-06-06 14:18   ` veerasena reddy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=BANLkTimXLrw8L0gXz3Yo-JtZE34HiE7BBA@mail.gmail.com \
    --to=veeruyours@gmail.com \
    --cc=xen-devel@lists.xensource.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).