* IRQs, move_in_progress, -EBUSY &c
@ 2010-08-11 14:56 George Dunlap
2010-08-11 15:04 ` Keir Fraser
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: George Dunlap @ 2010-08-11 14:56 UTC (permalink / raw)
To: xen-devel, Keir Fraser, Jeremy Fitzhardinge,
Konrad Rzeszutek Wilk
[-- Attachment #1: Type: text/plain, Size: 1423 bytes --]
I have a machine on which the pvops kernel boots fine in bare metal,
but when running under Xen, times out waiting for the root device.
The console log (with some additional messages added to track back the
root problem) is attached.
Going backwards to the root of the problem: The root device times out
even though the device driver successfully loads and sees the device
-- it complains about missing interrupts. It misses interrupts
because the PHYSDEVOP_setup_gsi returns -16, EBUSY, and the pvops
kernel doesn't retry; so the gsi is never set up.
PHYSDEVOP_setup_gsi returns -EBUSY because the IRQ in question is
marked move_in_progress. It was marked move_in_progress earlier when
one of the serial drivers remapped the first 15 IRQs. (At least, I
presume it's the serial driver, since it happens immediately after the
serial driver is loaded; I could be wrong.)
I have a simple work-around, which is to set dom0_max_vcpus=0 on the
Xen command line; the guest successfully boots after that. (So I
should be able to test those p2m patches that have been queued up for
a few weeks now.)
However, it seems that moving IRQs is not handled properly. Either
the pvops kernel should retry if it gets an -EBUSY, or the hypercall
should not fail, but wait until it can return success.
I discovered all this by adding debug statements to the IRQ path; the
patch is attached, if anyone else wants to use it.
-George
[-- Attachment #2: exile.006.log --]
[-- Type: text/x-log, Size: 74505 bytes --]
__ __ _ _ _ _ _ _
\ \/ /___ _ __ | || | / | _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ | || |_ | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | |__ _|| |__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |_|(_)_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 4.1-unstable (gdunlap@uk.xensource.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) Mon Aug 9 12:45:42 EDT 2010
(XEN) Latest ChangeSet: unavailable
(XEN) Console output is synchronous.
(XEN) Bootloader: COM32 Multiboot loader v0.2
(XEN) Command line: com1=115200,8n1 console=com1,tty sync_console console_to_ring dom0_mem=768M loglvl=all
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 2 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009c400 (usable)
(XEN) 000000000009c400 - 00000000000a0000 (reserved)
(XEN) 00000000000ce000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cfee0000 (usable)
(XEN) 00000000cfee0000 - 00000000cfee5000 (ACPI data)
(XEN) 00000000cfee5000 - 00000000cfef1000 (ACPI NVS)
(XEN) 00000000cfef1000 - 00000000d0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec03000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000fff80000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000130000000 (usable)
(XEN) ACPI: RSDP 000F8080, 0024 (r2 PTLTD )
(XEN) ACPI: XSDT CFEE01FE, 005C (r1 BRCM EXPLOSN 6040000 PTL 2000001)
(XEN) ACPI: FACP CFEE02CE, 00F4 (r3 BRCM EXPLOSN 6040000 MSFT 2000001)
(XEN) ACPI Warning (tbfadt-0444): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/C [20070126]
(XEN) ACPI: DSDT CFEE03C2, 4949 (r2 BRCM EXPLOSN 6040000 MSFT 3000000)
(XEN) ACPI: FACS CFEF0FC0, 0040
(XEN) ACPI: TCPA CFEE4D0B, 0032 (r1 BRCM EXPLOSN 6040000 PTL 20000001)
(XEN) ACPI: SRAT CFEE4D3D, 0128 (r1 AMD FAM_F_10 6040000 AMD 1)
(XEN) ACPI: HPET CFEE4E65, 0038 (r1 BRCM EXPLOSN 6040000 BRCM 2000001)
(XEN) ACPI: SSDT CFEE4E9D, 0049 (r1 BRCM PRT0 6040000 BRCM 2000001)
(XEN) ACPI: SPCR CFEE4EE6, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
(XEN) ACPI: APIC CFEE4F36, 00CA (r1 BRCM EXPLOSN 6040000 PTL 2000001)
(XEN) System RAM: 4094MB (4192752kB)
(XEN) SRAT: PXM 0 -> APIC 0 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 1 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 2 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 3 -> Node 0
(XEN) SRAT: PXM 1 -> APIC 4 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 5 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 6 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 7 -> Node 1
(XEN) SRAT: Node 0 PXM 0 0-a0000
(XEN) SRAT: Node 0 PXM 0 100000-d0000000
(XEN) SRAT: Node 0 PXM 0 100000000-130000000
(XEN) NUMA: Allocated memnodemap from 12fdfd000 - 12fdff000
(XEN) NUMA: Using 8 for the hash shift.
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f80b0
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x508
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[544,504], pm1x_evt[500,540]
(XEN) ACPI: wakeup_vec[cfef0fcc], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
(XEN) Processor #3 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
(XEN) Processor #4 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
(XEN) Processor #5 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
(XEN) Processor #6 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
(XEN) Processor #7 0:4 APIC version 16
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15
(XEN) ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16])
(XEN) IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31
(XEN) ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32])
(XEN) IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) Enabling APIC mode: Flat. Using 3 I/O APICs
(XEN) ACPI: HPET id: 0x1166a201 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 1995.068 MHz processor.
(XEN) Initing memory sharing.
(XEN) AMD Fam10h machine check reporting enabled
(XEN) AMD-Vi: IOMMU not found!
(XEN) I/O virtualisation disabled
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) irq 1 vec 40
(XEN) irq 3 vec 48
(XEN) irq 5 vec 56
(XEN) irq 6 vec 64
(XEN) irq 7 vec 72
(XEN) irq 8 vec 80
(XEN) irq 9 vec 88
(XEN) irq 10 vec 96
(XEN) irq 11 vec 104
(XEN) irq 12 vec 112
(XEN) irq 13 vec 120
(XEN) irq 14 vec 136
(XEN) irq 15 vec 144
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 14.318MHz HPET
XEN) Allocated console ring of 64 KiB.
(XEN) HVM: ASIDs enabled.
(XEN) HVM: SVM enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Brought up 8 CPUs
(XEN) tmem: initialized comp=0 dedup=0 tze=0 global-lock=0
(XEN) HPET: 3 timers in total, 0 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) MCA: Use hw thresholding to adjust polling frequency
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) Xenoprofile: Failed to setup IBS LVT offset, IBSCTL = 0xffffffff*** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x1000000 -> 0x1a04000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000012a000000->000000012c000000 (188416 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: 00000000c1000000->00000000c1a04000
(XEN) Init. ramdisk: 00000000c1a04000->00000000c1d1ae00
(XEN) Phys-Mach map: 00000000c1d1b000->00000000c1ddb000
(XEN) Start info: 00000000c1ddb000->00000000c1ddb4b4
(XEN) Page tables: 00000000c1ddc000->00000000c1df2000
(XEN) Boot stack: 00000000c1df2000->00000000c1df3000
(XEN) TOTAL: 00000000c0000000->00000000c2000000
(XEN) ENTRY ADDRESS: 00000000c17a6000
(XEN) Dom0 has maximum 8 VCPUs
(XEN) Scrubbing Free RAM: ................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 176kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Reserving virtual address space above 0xff800000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.17 (root@exile) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #4 SMP Fri Aug 6 17:19:19 BST 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009c400 (usable)
[ 0.000000] Xen: 000000000009c400 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000030000000 (usable)
[ 0.000000] Xen: 00000000cfee0000 - 00000000cfee5000 (ACPI data)
[ 0.000000] Xen: 00000000cfee5000 - 00000000cfef1000 (ACPI NVS)
[ 0.000000] Xen: 00000000cfef1000 - 00000000d0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec03000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x30000 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009c400 (usable)
[ 0.000000] modified: 000000000009c400 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000030000000 (usable)
[ 0.000000] modified: 00000000cfee0000 - 00000000cfee5000 (ACPI data)
[ 0.000000] modified: 00000000cfee5000 - 00000000cfef1000 (ACPI NVS)
[ 0.000000] modified: 00000000cfef1000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec03000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 027ff000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000030000000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0030000000 page 4k
[ 0.000000] kernel direct mapping tables up to 30000000 @ 100000-284000
[ 0.000000] RAMDISK: 01a04000 - 01d1ae00
[ 0.000000] ACPI: RSDP 000f8080 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT cfee01fe 0005C (v01 BRCM EXPLOSN 06040000 PTL 02000001)
[ 0.000000] ACPI: FACP cfee02ce 000F4 (v03 BRCM EXPLOSN 06040000 MSFT 02000001)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/C (20090903/tbfadt-557)
[ 0.000000] ACPI: DSDT cfee03c2 04949 (v02 BRCM EXPLOSN 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS cfef0fc0 00040
[ 0.000000] ACPI: TCPA cfee4d0b 00032 (v01 BRCM EXPLOSN 06040000 PTL 20000001)
[ 0.000000] ACPI: SRAT cfee4d3d 00128 (v01 AMD FAM_F_10 06040000 AMD 00000001)
[ 0.000000] ACPI: HPET cfee4e65 00038 (v01 BRCM EXPLOSN 06040000 BRCM 02000001)
[ 0.000000] ACPI: SSDT cfee4e9d 00049 (v01 BRCM PRT0 06040000 BRCM 02000001)
[ 0.000000] ACPI: SPCR cfee4ee6 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
[ 0.000000] ACPI: APIC cfee4f36 000CA (v01 BRCM EXPLOSN 06040000 PTL 02000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 768MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 30000000
[ 0.000000] low ram: 0 - 30000000
[ 0.000000] node 0 low ram: 00000000 - 30000000
[ 0.000000] node 0 bootmap 00010000 - 00016000
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 0030000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0001dde000 - 0001df4000] XEN PAGETABLES ==> [0001dde000 - 0001df4000]
[ 0.000000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #4 [0001000000 - 00018de9a4] TEXT DATA BSS ==> [0001000000 - 00018de9a4]
[ 0.000000] #5 [0001a04000 - 0001d1ae00] RAMDISK ==> [0001a04000 - 0001d1ae00]
[ 0.000000] #6 [0001d1b000 - 0001dde000] XEN START INFO ==> [0001d1b000 - 0001dde000]
[ 0.000000] #7 [00018df000 - 00018df18c] BRK ==> [00018df000 - 00018df18c]
[ 0.000000] #8 [0000100000 - 000026d000] PGTABLE ==> [0000100000 - 000026d000]
[ 0.000000] #9 [0000010000 - 0000016000] BOOTMAP ==> [0000010000 - 0000016000]
[ 0.000000] found SMP MP-table at [c00f80b0] f80b0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00030000
[ 0.000000] HighMem 0x00030000 -> 0x00030000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x00030000
[ 0.000000] On node 0 totalpages: 196492
[ 0.000000] free_area_init_node: node 0, pgdat c1798b60, node_mem_map c1df4200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3948 pages, LIFO batch:0
[ 0.000000] Normal zone: 1504 pages used for memmap
[ 0.000000] Normal zone: 191008 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16])
[ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec01000, GSI 16-16
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32])
[ 0.000000] IOAPIC[2]: apic_id 10, version 0, address 0xfec02000, GSI 32-32
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x1166a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 288
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:9fee0000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.1-unstable (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @c23fa000 s37048 r0 d24392 u65536
[ 0.000000] pcpu-alloc: s37048 r0 d24392 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] trying to map vcpu_info 0 at c23fb028, mfn 12c886, offset 40
[ 0.000000] cpu 0 using vcpu_info at c23fb028
[ 0.000000] trying to map vcpu_info 1 at c240b028, mfn 12c896, offset 40
[ 0.000000] cpu 1 using vcpu_info at c240b028
[ 0.000000] trying to map vcpu_info 2 at c241b028, mfn 12c8a6, offset 40
[ 0.000000] cpu 2 using vcpu_info at c241b028
[ 0.000000] trying to map vcpu_info 3 at c242b028, mfn 12c8b6, offset 40
[ 0.000000] cpu 3 using vcpu_info at c242b028
[ 0.000000] trying to map vcpu_info 4 at c243b028, mfn 12c8c6, offset 40
[ 0.000000] cpu 4 using vcpu_info at c243b028
[ 0.000000] trying to map vcpu_info 5 at c244b028, mfn 12c8d6, offset 40
[ 0.000000] cpu 5 using vcpu_info at c244b028
[ 0.000000] trying to map vcpu_info 6 at c245b028, mfn 12c8e6, offset 40
[ 0.000000] cpu 6 using vcpu_info at c245b028
[ 0.000000] trying to map vcpu_info 7 at c246b028, mfn 12c8f6, offset 40
[ 0.000000] cpu 7 using vcpu_info at c246b028
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194956
[ 0.000000] Kernel command line: root=/dev/sdb1 ro console=hvc0 earlyprintk=xen nomodeset loglevel=10 debug
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between c253d000 - c653d000
[ 0.000000] DMA: software IO TLB at phys 0x253d000 - 0x653d000
[ 0.000000] xen_swiotlb_fixup: buf=c253d000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=c659d000 size=32768
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 697580k/786432k available (4910k kernel code, 88008k reserved, 2921k data, 460k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xff71d000 - 0xff7ff000 ( 904 kB)
[ 0.000000] pkmap : 0xff200000 - 0xff400000 (2048 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff1fe000 ( 233 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] .init : 0xc17a6000 - 0xc1819000 ( 460 kB)
[ 0.000000] .data : 0xc14cb98a - 0xc17a5f4c (2921 kB)
[ 0.000000] .text : 0xc1000000 - 0xc14cb98a (4910 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:2304
[ 0.000000] xen: --> irq=0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen: --> irq=2
[ 0.000000] xen: --> irq=3
[ 0.000000] xen: --> irq=4
[ 0.000000] xen: --> irq=5
[ 0.000000] xen: --> irq=6
[ 0.000000] xen: --> irq=7
[ 0.000000] xen: --> irq=8
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: --> irq=10
[ 0.000000] xen: --> irq=11
[ 0.000000] xen: --> irq=12
[ 0.000000] xen: --> irq=13
[ 0.000000] xen: --> irq=14
[ 0.000000] xen: --> irq=15
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] xen_acpi_parse_int_src_ovr: intsrc->source_irq == acpi_gbl_FADT.sci_interrupt failed, not registering (0 9)
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] alloc irq_desc for 2303 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] Detected 1995.068 MHz processor.
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.13 BogoMIPS (lpj=1995068)
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Initializing.
[ 0.000999] SELinux: Starting in permissive mode
[ 0.000999] Mount-cache hash table entries: 512
[ 0.001263] Initializing cgroup subsys ns
[ 0.001999] Initializing cgroup subsys cpuacct
[ 0.001999] Initializing cgroup subsys freezer
[ 0.002043] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003019] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003999] CPU: Physical Processor ID: 0
[ 0.003999] CPU: Processor Core ID: 0
[ 0.004023] mce: CPU supports 6 MCE banks
[ 0.005043] Performance Events: AMD PMU driver.
[ 0.005999] ------------[ cut here ]------------
[ 0.005999] WARNING: at /root/xen-unstable.hg/linux-2.6-pvops.git/arch/x86/xen/enlighten.c:742 xen_apic_write+0x12/0x14()
[ 0.005999] Hardware name: empty
[ 0.005999] Modules linked in:
[ 0.005999] Pid: 0, comm: swapper Not tainted 2.6.32.17 #4
[ 0.005999] Call Trace:
[ 0.005999] [<c10622e9>] warn_slowpath_common+0x60/0x90
[ 0.005999] [<c1062326>] warn_slowpath_null+0xd/0x10
[ 0.005999] [<c1029c86>] xen_apic_write+0x12/0x14
[ 0.005999] [<c1038e53>] perf_events_lapic_init+0x2b/0x2d
[ 0.005999] [<c17b0285>] init_hw_perf_events+0x2e5/0x37f
[ 0.005999] [<c17afdf1>] identify_boot_cpu+0x21/0x23
[ 0.005999] [<c17afe9c>] check_bugs+0xb/0x10f
[ 0.005999] [<c10a5c5d>] ? delayacct_init+0x42/0x45
[ 0.005999] [<c17a685e>] start_kernel+0x30b/0x31a
[ 0.005999] [<c17a60a2>] i386_start_kernel+0x91/0x96
[ 0.005999] [<c17a9ef6>] xen_start_kernel+0x5d4/0x5dc
[ 0.005999] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.005999] ... version: 0
[ 0.005999] ... bit width: 48
[ 0.005999] ... generic registers: 4
[ 0.005999] ... value mask: 0000ffffffffffff
[ 0.005999] ... max period: 00007fffffffffff
[ 0.005999] ... fixed-purpose events: 0
[ 0.005999] ... event mask: 000000000000000f
[ 0.007193] SMP alternatives: switching to UP code
[ 0.009874] ACPI: Core revision 20090903
[ 0.022172] alloc irq_desc for 2302 on node 0
[ 0.022996] alloc kstat_irqs on node 0
[ 0.023023] alloc irq_desc for 2301 on node 0
[ 0.023996] alloc kstat_irqs on node 0
[ 0.024021] alloc irq_desc for 2300 on node 0
[ 0.024996] alloc kstat_irqs on node 0
[ 0.024996] alloc irq_desc for 2299 on node 0
[ 0.024996] alloc kstat_irqs on node 0
[ 0.025400] installing Xen timer for CPU 1
[ 0.026013] alloc irq_desc for 2298 on node 0
[ 0.026995] alloc kstat_irqs on node 0
[ 0.027064] SMP alternatives: switching to SMP code
[ 0.028995] alloc irq_desc for 2297 on node 0
[ 0.028995] alloc kstat_irqs on node 0
[ 0.029022] alloc irq_desc for 2296 on node 0
[ 0.029995] alloc kstat_irqs on node 0
[ 0.030021] alloc irq_desc for 2295 on node 0
[ 0.030995] alloc kstat_irqs on node 0
[ 0.030995] alloc irq_desc for 2294 on node 0
[ 0.030995] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#1
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.031401] installing Xen timer for CPU 2
[ 0.032013] alloc irq_desc for 2293 on node 0
[ 0.032994] alloc kstat_irqs on node 0
[ 0.033076] alloc irq_desc for 2292 on node 0
[ 0.033994] alloc kstat_irqs on node 0
[ 0.034020] alloc irq_desc for 2291 on node 0
[ 0.034994] alloc kstat_irqs on node 0
[ 0.035020] alloc irq_desc for 2290 on node 0
[ 0.035994] alloc kstat_irqs on node 0
[ 0.035994] alloc irq_desc for 2289 on node 0
[ 0.035994] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#2
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 2
[ 0.036387] installing Xen timer for CPU 3
[ 0.037011] alloc irq_desc for 2288 on node 0
[ 0.037994] alloc kstat_irqs on node 0
[ 0.038074] alloc irq_desc for 2287 on node 0
[ 0.038994] alloc kstat_irqs on node 0
[ 0.039019] alloc irq_desc for 2286 on node 0
[ 0.039993] alloc kstat_irqs on node 0
[ 0.040019] alloc irq_desc for 2285 on node 0
[ 0.040993] alloc kstat_irqs on node 0
[ 0.040993] alloc irq_desc for 2284 on node 0
[ 0.040993] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#3
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 3
[ 0.041386] installing Xen timer for CPU 4
[ 0.042011] alloc irq_desc for 2283 on node 0
[ 0.042993] alloc kstat_irqs on node 0
[ 0.043072] alloc irq_desc for 2282 on node 0
[ 0.043993] alloc kstat_irqs on node 0
[ 0.044019] alloc irq_desc for 2281 on node 0
[ 0.044993] alloc kstat_irqs on node 0
[ 0.045019] alloc irq_desc for 2280 on node 0
[ 0.045993] alloc kstat_irqs on node 0
[ 0.046023] alloc irq_desc for 2279 on node 0
[ 0.046992] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#4
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 1
[ 0.000999] CPU: Processor Core ID: 0
[ 0.047367] installing Xen timer for CPU 5
[ 0.048011] alloc irq_desc for 2278 on node 0
[ 0.048992] alloc kstat_irqs on node 0
[ 0.049072] alloc irq_desc for 2277 on node 0
[ 0.049992] alloc kstat_irqs on node 0
[ 0.050019] alloc irq_desc for 2276 on node 0
[ 0.050992] alloc kstat_irqs on node 0
[ 0.051019] alloc irq_desc for 2275 on node 0
[ 0.051992] alloc kstat_irqs on node 0
[ 0.051992] alloc irq_desc for 2274 on node 0
[ 0.051992] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#5
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 1
[ 0.000999] CPU: Processor Core ID: 1
[ 0.052360] installing Xen timer for CPU 6
[ 0.053010] alloc irq_desc for 2273 on node 0
[ 0.053991] alloc kstat_irqs on node 0
[ 0.054071] alloc irq_desc for 2272 on node 0
[ 0.054991] alloc kstat_irqs on node 0
[ 0.055018] alloc irq_desc for 2271 on node 0
[ 0.055991] alloc kstat_irqs on node 0
[ 0.056018] alloc irq_desc for 2270 on node 0
[ 0.056991] alloc kstat_irqs on node 0
[ 0.056991] alloc irq_desc for 2269 on node 0
[ 0.056991] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#6
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 1
[ 0.000999] CPU: Processor Core ID: 2
[ 0.057372] installing Xen timer for CPU 7
[ 0.058033] alloc irq_desc for 2268 on node 0
[ 0.058991] alloc kstat_irqs on node 0
[ 0.059116] alloc irq_desc for 2267 on node 0
[ 0.059990] alloc kstat_irqs on node 0
[ 0.060035] alloc irq_desc for 2266 on node 0
[ 0.060990] alloc kstat_irqs on node 0
[ 0.061034] alloc irq_desc for 2265 on node 0
[ 0.061990] alloc kstat_irqs on node 0
[ 0.061990] alloc irq_desc for 2264 on node 0
[ 0.061990] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#7
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 1
[ 0.000999] CPU: Processor Core ID: 3
[ 0.062990] Brought up 8 CPUs
[ 0.065210] Grant table initialized
[ 0.065989] Time: 16:53:09 Date: 08/09/10
[ 0.066106] NET: Registered protocol family 16
[ 0.067075] alloc irq_desc for 2263 on node 0
[ 0.067989] alloc kstat_irqs on node 0
[ 0.068183] ACPI: bus type pci registered
[ 0.069428] PCI: BIOS BUG #32[0000014a] found
[ 0.069989] PCI: Using configuration type 1 for base access
[ 0.069989] PCI: Using configuration type 1 for extended access
[ 0.096045] bio: create slab <bio-0> at 0
[ 0.099694] ERROR: Unable to locate IOAPIC for GSI 9
(XEN) irq 9 vec 152
(XEN) irq 9 moving vector 88
[ 0.109074] ACPI: EC: Look up EC in DSDT
[ 0.123900] ACPI: Interpreter enabled
[ 0.123981] ACPI: (supports S0 S1 S4 S5)
[ 0.123981] ACPI: Using IOAPIC for interrupt routing
[ 0.160629] ACPI: No dock devices found.
[ 0.166974] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.172206] pci 0000:00:01.0: Enabling HT MSI Mapping
[ 0.172973] pci 0000:00:02.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.172973] pci 0000:00:02.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.172973] pci 0000:00:02.1: reg 18 io port: [0x170-0x177]
[ 0.172973] pci 0000:00:02.1: reg 1c io port: [0x374-0x377]
[ 0.172973] pci 0000:00:02.1: reg 20 io port: [0x4800-0x480f]
[ 0.172973] pci 0000:00:03.0: reg 10 32bit mmio: [0xd8510000-0xd8510fff]
[ 0.172973] pci 0000:00:03.0: reg 14 io port: [0x4c00-0x4cff]
[ 0.172973] pci 0000:00:03.1: reg 10 32bit mmio: [0xd8511000-0xd8511fff]
[ 0.172973] pci 0000:00:03.1: reg 14 io port: [0x5000-0x50ff]
[ 0.172973] pci 0000:00:03.2: reg 10 32bit mmio: [0xd8512000-0xd8512fff]
[ 0.172973] pci 0000:00:03.2: reg 14 io port: [0x5400-0x54ff]
[ 0.172973] pci 0000:00:03.2: supports D1 D2
[ 0.172973] pci 0000:00:03.2: PME# supported from D0 D1 D2 D3hot
[ 0.172973] pci 0000:00:03.2: PME# disabled
[ 0.172973] pci 0000:00:04.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.172973] pci 0000:00:04.0: reg 14 io port: [0x5800-0x58ff]
[ 0.172973] pci 0000:00:04.0: reg 18 32bit mmio: [0xd8500000-0xd850ffff]
[ 0.172973] pci 0000:00:04.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.172973] pci 0000:00:04.0: supports D1 D2
[ 0.172973] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.172973] pci 0000:00:06.0: PME# disabled
[ 0.172973] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.172973] pci 0000:00:07.0: PME# disabled
[ 0.172973] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
[ 0.172973] pci 0000:00:08.0: PME# disabled
[ 0.172973] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.172973] pci 0000:00:09.0: PME# disabled
[ 0.172973] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.172973] pci 0000:00:0a.0: PME# disabled
[ 0.335150] pci 0000:01:0e.0: reg 10 io port: [0x6040-0x6047]
[ 0.335951] pci 0000:01:0e.0: reg 14 io port: [0x6034-0x6037]
[ 0.335951] pci 0000:01:0e.0: reg 18 io port: [0x6038-0x603f]
[ 0.335951] pci 0000:01:0e.0: reg 1c io port: [0x6030-0x6033]
[ 0.335951] pci 0000:01:0e.0: reg 20 io port: [0x6000-0x600f]
[ 0.335951] pci 0000:01:0e.0: reg 24 32bit mmio: [0xd8300000-0xd8301fff]
[ 0.335951] pci 0000:01:0e.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.335951] pci 0000:01:0e.1: reg 10 io port: [0x6058-0x605f]
[ 0.335951] pci 0000:01:0e.1: reg 14 io port: [0x604c-0x604f]
[ 0.335951] pci 0000:01:0e.1: reg 18 io port: [0x6050-0x6057]
[ 0.335951] pci 0000:01:0e.1: reg 1c io port: [0x6048-0x604b]
[ 0.335951] pci 0000:01:0e.1: reg 20 io port: [0x6020-0x602f]
[ 0.335951] pci 0000:00:01.0: bridge io port: [0x6000-0x6fff]
[ 0.335951] pci 0000:00:01.0: bridge 32bit mmio: [0xd8300000-0xd83fffff]
[ 0.335951] pci 0000:06:00.0: reg 10 io port: [0x7000-0x70ff]
[ 0.335951] pci 0000:06:00.0: reg 14 64bit mmio: [0xd8210000-0xd8213fff]
[ 0.335951] pci 0000:06:00.0: reg 1c 64bit mmio: [0xd8200000-0xd820ffff]
[ 0.335951] pci 0000:06:00.0: reg 30 32bit mmio pref: [0x000000-0x0fffff]
[ 0.335951] pci 0000:06:00.0: supports D1 D2
[ 0.335951] pci 0000:00:09.0: bridge io port: [0x7000-0x7fff]
[ 0.335951] pci 0000:00:09.0: bridge 32bit mmio: [0xd8200000-0xd82fffff]
[ 0.335951] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.335951] pci 0000:07:00.0: PME# disabled
[ 0.335951] pci 0000:00:0a.0: bridge 32bit mmio: [0xd8400000-0xd84fffff]
[ 0.335951] pci 0000:08:04.0: reg 10 64bit mmio: [0xd8410000-0xd841ffff]
[ 0.335951] pci 0000:08:04.0: reg 18 64bit mmio: [0xd8400000-0xd840ffff]
[ 0.335951] pci 0000:08:04.0: PME# supported from D3hot D3cold
[ 0.335951] pci 0000:08:04.0: PME# disabled
[ 0.335951] pci 0000:08:04.1: reg 10 64bit mmio: [0xd8430000-0xd843ffff]
[ 0.335951] pci 0000:08:04.1: reg 18 64bit mmio: [0xd8420000-0xd842ffff]
[ 0.335951] pci 0000:08:04.1: PME# supported from D3hot D3cold
[ 0.335951] pci 0000:08:04.1: PME# disabled
[ 0.335951] pci 0000:07:00.0: bridge 32bit mmio: [0xd8400000-0xd84fffff]
[ 0.335951] pci_bus 0000:00: on NUMA node 0
[ 0.335951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.522264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXB_._PRT]
[ 0.528999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXB_.PPBX._PRT]
[ 0.529951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB0._PRT]
[ 0.529951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB1._PRT]
[ 0.529951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB2._PRT]
[ 0.529951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB3._PRT]
[ 0.529951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB4._PRT]
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:02.0
(XEN) PCI add device 00:02.1
(XEN) PCI add device 00:02.2
(XEN) PCI add device 00:03.0
(XEN) PCI add device 00:03.1
(XEN) PCI add device 00:03.2
(XEN) PCI add device 00:04.0
(XEN) PCI add device 00:06.0
(XEN) PCI add device 00:07.0
(XEN) PCI add device 00:08.0
(XEN) PCI add device 00:09.0
(XEN) PCI add device 00:0a.0
(XEN) PCI add device 00:18.0
(XEN) PCI add device 00:18.1
(XEN) PCI add device 00:18.2
(XEN) PCI add device 00:18.3
(XEN) PCI add device 00:18.4
(XEN) PCI add device 00:19.0
(XEN) PCI add device 00:19.1
(XEN) PCI add device 00:19.2
(XEN) PCI add device 00:19.3
(XEN) PCI add device 00:19.4
(XEN) PCI add device 01:0d.0
(XEN) PCI add device 01:0e.0
(XEN) PCI add device 01:0e.1
(XEN) PCI add device 06:00.0
(XEN) PCI add device 07:00.0
(XEN) PCI add device 08:04.0
(XEN) PCI add device 08:04.1
[ 0.656224] ACPI: PCI Interrupt Link [LNKU] (IRQs *10 11)
[ 0.662020] ACPI: PCI Interrupt Link [LNKW] (IRQs 10 11) *0, disabled.
[ 0.667983] ACPI: PCI Interrupt Link [LNKS] (IRQs 5 *7 11)
[ 0.674010] ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.681019] ACPI: PCI Interrupt Link [LN01] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.689021] ACPI: PCI Interrupt Link [LN02] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.696018] ACPI: PCI Interrupt Link [LN03] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.704031] ACPI: PCI Interrupt Link [LN04] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.711018] ACPI: PCI Interrupt Link [LN05] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.719023] ACPI: PCI Interrupt Link [LN06] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.726006] ACPI: PCI Interrupt Link [LN07] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.734005] ACPI: PCI Interrupt Link [LN08] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.741013] ACPI: PCI Interrupt Link [LN09] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.749009] ACPI: PCI Interrupt Link [LN0A] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.756017] ACPI: PCI Interrupt Link [LN0B] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.764006] ACPI: PCI Interrupt Link [LN0C] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.771017] ACPI: PCI Interrupt Link [LN0D] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.779030] ACPI: PCI Interrupt Link [LN0E] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.786018] ACPI: PCI Interrupt Link [LN0F] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.793975] ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 7 *11 12 14 15)
[ 0.800014] ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.808013] ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.814962] ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 *5 7 11 12 14 15)
[ 0.821969] ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 5 7 *11 12 14 15)
[ 0.828004] ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.835012] ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.842012] ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.849018] ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.857012] ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.864012] ACPI: PCI Interrupt Link [LN1A] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.871060] ACPI: PCI Interrupt Link [LN1B] (IRQs 3 4 *5 7 11 12 14 15)
[ 0.877004] ACPI: PCI Interrupt Link [LN1C] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.884004] ACPI: PCI Interrupt Link [LN1D] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.892012] ACPI: PCI Interrupt Link [LN1E] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.899012] ACPI: PCI Interrupt Link [LN1F] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.907013] sync cpu 0 get result 1 max_id 7
[ 0.911028] sync cpu 1 get result 1 max_id 7
[ 0.915029] sync cpu 2 get result 1 max_id 7
[ 0.919034] sync cpu 3 get result 1 max_id 7
[ 0.923982] sync cpu 4 get result 1 max_id 7
[ 0.928030] sync cpu 5 get result 1 max_id 7
[ 0.932030] sync cpu 6 get result 1 max_id 7
[ 0.936030] sync cpu 7 get result 1 max_id 7
[ 0.939976] alloc irq_desc for 2262 on node 0
[ 0.940951] alloc kstat_irqs on node 0
[ 0.948993] xen_balloon: Initialising balloon driver with page order 0.
[ 0.955010] vgaarb: device added: PCI:0000:00:04.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.955951] vgaarb: loaded
[ 0.966098] SCSI subsystem initialized
[ 0.970087] libata version 3.00 loaded.
[ 0.975017] usbcore: registered new interface driver usbfs
[ 0.979984] usbcore: registered new interface driver hub
[ 0.985016] usbcore: registered new device driver usb
[ 0.991050] PCI: Using ACPI for IRQ routing
[ 1.003004] NetLabel: Initializing
[ 1.003951] NetLabel: domain hash size = 128
[ 1.003951] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.003951] NetLabel: unlabeled traffic allowed by default
[ 1.020133] Switching to clocksource xen
[ 1.029089] pnp: PnP ACPI init
[ 1.029380] ACPI: bus type pnp registered
[ 1.039091] xen: registering gsi 8 triggering 1 polarity 0
[ 1.039955] xen_allocate_pirq: returning irq 8 for gsi 8
[ 1.039955] xen: --> irq=8
[ 1.055388] xen: registering gsi 1 triggering 1 polarity 0
[ 1.055974] xen_allocate_pirq: returning irq 1 for gsi 1
[ 1.055974] xen: --> irq=1
[ 1.070027] xen: registering gsi 13 triggering 1 polarity 0
[ 1.070914] xen_allocate_pirq: returning irq 13 for gsi 13
[ 1.070914] xen: --> irq=13
[ 1.084609] xen: registering gsi 12 triggering 1 polarity 0
[ 1.085572] xen_allocate_pirq: returning irq 12 for gsi 12
[ 1.085572] xen: --> irq=12
[ 1.099980] xen: registering gsi 4 triggering 1 polarity 0
[ 1.100564] xen_allocate_pirq: returning irq 4 for gsi 4
[ 1.100564] xen: --> irq=4
(XEN) PHYSDEVOP_setup_gsi: mp_register_gsi returned -17
[ 1.118618] Already setup the GSI :4
[ 1.123001] xen: registering gsi 3 triggering 1 polarity 0
[ 1.123579] xen_allocate_pirq: returning irq 3 for gsi 3
[ 1.123579] xen: --> irq=3
[ 1.137269] xen: registering gsi 6 triggering 1 polarity 0
[ 1.138011] xen_allocate_pirq: returning irq 6 for gsi 6
[ 1.138011] xen: --> irq=6
[ 1.151582] pnp: PnP ACPI: found 16 devices
[ 1.152489] ACPI: ACPI bus type pnp unregistered
[ 1.152489] system 00:00: iomem range 0xfed08000-0xfed08007 has been reserved
[ 1.152489] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.152489] system 00:0b: ioport range 0x40b-0x40b has been reserved
[ 1.152489] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 1.152489] system 00:0b: ioport range 0x4d6-0x4d6 has been reserved
[ 1.152489] system 00:0b: ioport range 0x500-0x560 has been reserved
[ 1.152489] system 00:0b: ioport range 0x558-0x55b has been reserved
[ 1.152489] system 00:0b: ioport range 0x580-0x58f has been reserved
[ 1.152489] system 00:0b: ioport range 0x590-0x593 has been reserved
[ 1.152489] system 00:0b: ioport range 0x600-0x61f has been reserved
[ 1.152489] system 00:0b: ioport range 0x620-0x623 has been reserved
[ 1.152489] system 00:0b: ioport range 0x700-0x703 has been reserved
[ 1.152489] system 00:0b: ioport range 0xc00-0xc01 has been reserved
[ 1.152489] system 00:0b: ioport range 0xc06-0xc08 has been reserved
[ 1.152489] system 00:0b: ioport range 0xc14-0xc14 has been reserved
[ 1.152489] system 00:0b: ioport range 0xc49-0xc4a has been reserved
[ 1.152489] system 00:0b: ioport range 0xc50-0xc53 has been reserved
[ 1.152489] system 00:0b: ioport range 0xc6c-0xc6c has been reserved
[ 1.152489] system 00:0b: ioport range 0xc6f-0xc6f has been reserved
[ 1.152489] system 00:0b: ioport range 0xcd6-0xcd7 has been reserved
[ 1.152489] system 00:0b: ioport range 0xcf9-0xcf9 could not be reserved
[ 1.152489] system 00:0b: ioport range 0xf50-0xf58 has been reserved
[ 1.303725] pciback 0000:00:01.0: probing...
[ 1.304684] pciback 0000:00:02.0: probing...
[ 1.304684] pciback 0000:00:02.1: probing...
[ 1.304684] pciback 0000:00:02.2: probing...
[ 1.304684] pciback 0000:00:03.0: probing...
[ 1.304684] pciback 0000:00:03.1: probing...
[ 1.304684] pciback 0000:00:03.2: probing...
[ 1.304684] pciback 0000:00:04.0: probing...
[ 1.304684] pciback 0000:00:06.0: probing...
[ 1.304684] pciback 0000:00:07.0: probing...
[ 1.304684] pciback 0000:00:08.0: probing...
[ 1.304684] pciback 0000:00:09.0: probing...
[ 1.304684] pciback 0000:00:0a.0: probing...
[ 1.304684] pciback 0000:00:18.0: probing...
[ 1.304684] pciback 0000:00:18.1: probing...
[ 1.304684] pciback 0000:00:18.2: probing...
[ 1.304684] pciback 0000:00:18.3: probing...
[ 1.304684] pciback 0000:00:18.4: probing...
[ 1.304684] pciback 0000:00:19.0: probing...
[ 1.304684] pciback 0000:00:19.1: probing...
[ 1.304684] pciback 0000:00:19.2: probing...
[ 1.304684] pciback 0000:00:19.3: probing...
[ 1.304684] pciback 0000:00:19.4: probing...
[ 1.304684] pciback 0000:01:0d.0: probing...
[ 1.304684] pciback 0000:01:0e.0: probing...
[ 1.304684] pciback 0000:01:0e.1: probing...
[ 1.304684] pciback 0000:06:00.0: probing...
[ 1.304684] pciback 0000:07:00.0: probing...
[ 1.304684] pciback 0000:08:04.0: probing...
[ 1.304684] pciback 0000:08:04.1: probing...
[ 1.439291] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 1.439386] pci 0000:01:0d.0: PCI bridge, secondary bus 0000:02
[ 1.439386] pci 0000:01:0d.0: IO window: disabled
[ 1.439386] pci 0000:01:0d.0: MEM window: disabled
[ 1.439386] pci 0000:01:0d.0: PREFETCH window: disabled
[ 1.439386] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.439386] pci 0000:00:01.0: IO window: 0x6000-0x6fff
[ 1.439386] pci 0000:00:01.0: MEM window: 0xd8300000-0xd83fffff
[ 1.439386] pci 0000:00:01.0: PREFETCH window: 0x30000000-0x300fffff
[ 1.439386] pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
[ 1.439386] pci 0000:00:06.0: IO window: disabled
[ 1.439386] pci 0000:00:06.0: MEM window: disabled
[ 1.439386] pci 0000:00:06.0: PREFETCH window: disabled
[ 1.439386] pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
[ 1.439386] pci 0000:00:07.0: IO window: disabled
[ 1.439386] pci 0000:00:07.0: MEM window: disabled
[ 1.439386] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.439386] pci 0000:00:08.0: PCI bridge, secondary bus 0000:05
[ 1.439386] pci 0000:00:08.0: IO window: disabled
[ 1.439386] pci 0000:00:08.0: MEM window: disabled
[ 1.439386] pci 0000:00:08.0: PREFETCH window: disabled
[ 1.439386] pci 0000:00:09.0: PCI bridge, secondary bus 0000:06
[ 1.439386] pci 0000:00:09.0: IO window: 0x7000-0x7fff
[ 1.439386] pci 0000:00:09.0: MEM window: 0xd8200000-0xd82fffff
[ 1.439386] pci 0000:00:09.0: PREFETCH window: 0x30100000-0x301fffff
[ 1.579936] pci 0000:07:00.0: PCI bridge, secondary bus 0000:08
[ 1.580905] pci 0000:07:00.0: IO window: disabled
[ 1.580905] pci 0000:07:00.0: MEM window: 0xd8400000-0xd84fffff
[ 1.580905] pci 0000:07:00.0: PREFETCH window: disabled
[ 1.580905] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:07
[ 1.580905] pci 0000:00:0a.0: IO window: disabled
[ 1.580905] pci 0000:00:0a.0: MEM window: 0xd8400000-0xd84fffff
[ 1.580905] pci 0000:00:0a.0: PREFETCH window: disabled
[ 1.580905] xen: registering gsi 32 triggering 0 polarity 1
[ 1.580905] alloc irq_desc for 32 on node 0
[ 1.580905] alloc kstat_irqs on node 0
[ 1.639106] xen: --> irq=32
(XEN) irq 32 vec 160
[ 1.643869] pci 0000:00:06.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 1.644847] pci 0000:00:06.0: setting latency timer to 64
[ 1.644847] xen: registering gsi 32 triggering 0 polarity 1
[ 1.644847] xen_allocate_pirq: returning irq 32 for gsi 32
[ 1.644847] xen: --> irq=32
(XEN) PHYSDEVOP_setup_gsi: mp_register_gsi returned -17
[ 1.675061] Already setup the GSI :32
[ 1.676044] pci 0000:00:07.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 1.676044] pci 0000:00:07.0: setting latency timer to 64
[ 1.676044] xen: registering gsi 32 triggering 0 polarity 1
[ 1.676044] xen_allocate_pirq: returning irq 32 for gsi 32
[ 1.676044] xen: --> irq=32
(XEN) PHYSDEVOP_setup_gsi: mp_register_gsi returned -17
[ 1.709987] Already setup the GSI :32
[ 1.710970] pci 0000:00:08.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 1.710970] pci 0000:00:08.0: setting latency timer to 64
[ 1.710970] xen: registering gsi 32 triggering 0 polarity 1
[ 1.710970] xen_allocate_pirq: returning irq 32 for gsi 32
[ 1.710970] xen: --> irq=32
(XEN) PHYSDEVOP_setup_gsi: mp_register_gsi returned -17
[ 1.744913] Already setup the GSI :32
[ 1.745897] pci 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 1.745897] pci 0000:00:09.0: setting latency timer to 64
[ 1.745897] xen: registering gsi 32 triggering 0 polarity 1
[ 1.745897] xen_allocate_pirq: returning irq 32 for gsi 32
[ 1.745897] xen: --> irq=32
(XEN) PHYSDEVOP_setup_gsi: mp_register_gsi returned -17
[ 1.779837] Already setup the GSI :32
[ 1.780821] pci 0000:00:0a.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 1.780821] pci 0000:00:0a.0: setting latency timer to 64
[ 1.780821] pci 0000:07:00.0: setting latency timer to 64
[ 1.780821] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.780821] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.780821] pci_bus 0000:01: resource 0 io: [0x6000-0x6fff]
[ 1.780821] pci_bus 0000:01: resource 1 mem: [0xd8300000-0xd83fffff]
[ 1.780821] pci_bus 0000:01: resource 2 pref mem [0x30000000-0x300fffff]
[ 1.780821] pci_bus 0000:06: resource 0 io: [0x7000-0x7fff]
[ 1.780821] pci_bus 0000:06: resource 1 mem: [0xd8200000-0xd82fffff]
[ 1.780821] pci_bus 0000:06: resource 2 pref mem [0x30100000-0x301fffff]
[ 1.780821] pci_bus 0000:07: resource 1 mem: [0xd8400000-0xd84fffff]
[ 1.780821] pci_bus 0000:08: resource 1 mem: [0xd8400000-0xd84fffff]
[ 1.864430] NET: Registered protocol family 2
[ 1.865330] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.876630] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.877441] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.877441] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.877441] TCP reno registered
[ 1.877441] NET: Registered protocol family 1
[ 1.906862] RPC: Registered udp transport module.
[ 1.907747] RPC: Registered tcp transport module.
[ 1.907747] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.923077] pci 0000:00:02.0: disabled boot interrupts on device [1166:0205]
[ 1.930589] pci 0000:00:04.0: Boot video device
[ 1.935457] Trying to unpack rootfs image as initramfs...
[ 1.949326] Freeing initrd memory: 3163k freed
[ 1.955508] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.956072] DMA: Placing 64MB software IO TLB between c253d000 - c653d000
[ 1.956072] DMA: software IO TLB at phys 0x253d000 - 0x653d000
[ 1.974963] kvm: no hardware support
[ 1.978712] has_svm: svm not available
[ 1.979627] kvm: no hardware support
[ 1.996672] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.997660] Scanning for low memory corruption every 60 seconds
[ 2.012172] audit: initializing netlink socket (disabled)
[ 2.018006] type=2000 audit(1281372790.464:1): initialized
[ 2.034412] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.048911] VFS: Disk quotas dquot_6.5.2
[ 2.053148] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.062008] msgmni has been set to 1369
[ 2.066684] SELinux: Registering netfilter hooks
[ 2.073211] alg: No test for stdrng (krng)
[ 2.077888] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.078875] io scheduler noop registered
[ 2.078875] io scheduler anticipatory registered
[ 2.078875] io scheduler deadline registered
[ 2.098500] io scheduler cfq registered (default)
[ 2.103894] alloc irq_desc for 2261 on node 0
[ 2.104569] alloc kstat_irqs on node 0
(XEN) irq 48 vec 168
[ 2.114479] pcieport 0000:00:06.0: setting latency timer to 64
[ 2.120911] alloc irq_desc for 2260 on node 0
[ 2.121562] alloc kstat_irqs on node 0
(XEN) irq 49 vec 176
[ 2.131478] pcieport 0000:00:07.0: setting latency timer to 64
[ 2.137947] alloc irq_desc for 2259 on node 0
[ 2.138676] alloc kstat_irqs on node 0
(XEN) irq 50 vec 184
[ 2.148475] pcieport 0000:00:08.0: setting latency timer to 64
[ 2.154944] alloc irq_desc for 2258 on node 0
[ 2.155660] alloc kstat_irqs on node 0
(XEN) irq 51 vec 192
[ 2.165505] pcieport 0000:00:09.0: setting latency timer to 64
[ 2.172079] alloc irq_desc for 2257 on node 0
[ 2.173067] alloc kstat_irqs on node 0
(XEN) irq 52 vec 200
[ 2.182665] pcieport 0000:00:0a.0: setting latency timer to 64
[ 2.189294] aer 0000:00:06.0:pcie02: AER service couldn't init device: no _OSC support
[ 2.197405] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 2.205464] aer 0000:00:08.0:pcie02: AER service couldn't init device: no _OSC support
[ 2.213546] aer 0000:00:09.0:pcie02: AER service couldn't init device: no _OSC support
[ 2.221639] aer 0000:00:0a.0:pcie02: AER service couldn't init device: no _OSC support
[ 2.229855] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.236563] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input0
[ 2.237549] ACPI: Power Button [PWRB]
[ 2.250027] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.250937] ACPI: Power Button [PWRF]
[ 2.261655] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input2
[ 2.262564] ACPI: Sleep Button [SLPF]
[ 2.281298] Event-channel device installed.
[ 2.285809] pciback: pcistub_init_devices_late
[ 2.299475] blktap_device_init: blktap device major 253
[ 2.300069] blktap_ring_init: blktap ring major: 251
[ 2.321893] registering netback
[ 2.335114] alloc irq_desc for 2256 on node 0
[ 2.336078] alloc kstat_irqs on node 0
[ 2.345165] hpet_acpi_add: no address or irqs in _CRS
[ 2.350590] Non-volatile memory driver v1.3
[ 2.351568] Linux agpgart interface v0.103
[ 2.360245] [drm] Initialized drm 1.1.0 20060810
[ 2.361194] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
(XEN) irq 15 vec 208
(XEN) irq 15 moving vector 144
(XEN) irq 14 vec 216
(XEN) irq 14 moving vector 136
(XEN) irq 13 vec 33
(XEN) irq 13 moving vector 120
(XEN) irq 12 vec 41
(XEN) irq 12 moving vector 112
(XEN) irq 11 vec 49
(XEN) irq 11 moving vector 104
(XEN) irq 10 vec 57
(XEN) irq 10 moving vector 96
(XEN) irq 8 vec 65
(XEN) irq 8 moving vector 80
(XEN) irq 7 vec 73
(XEN) irq 7 moving vector 72
(XEN) irq 6 vec 81
(XEN) irq 6 moving vector 64
(XEN) irq 5 vec 89
(XEN) irq 5 moving vector 56
(XEN) irq 3 vec 97
(XEN) irq 3 moving vector 48
(XEN) irq 1 vec 105
(XEN) irq 1 moving vector 40
(XEN) irq 15 v208: move_in_progress
(XEN) irq 14 v216: move_in_progress
(XEN) irq 13 v33: move_in_progress
(XEN) irq 12 v41: move_in_progress
(XEN) irq 11 v49: move_in_progress
(XEN) irq 10 v57: move_in_progress
(XEN) irq 8 v65: move_in_progress
(XEN) irq 7 v73: move_in_progress
(XEN) irq 6 v81: move_in_progress
(XEN) irq 5 v89: move_in_progress
(XEN) irq 3 v97: move_in_progress
(XEN) irq 1 v105: move_in_progress
(XEN) send_cleanup_vector: Done moving vec 97
[ 2.710273] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.717574] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.728058] brd: module loaded
[ 2.733382] loop: module loaded
[ 2.736931] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 2.746989] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 2.747967] Copyright (c) 1999-2006 Intel Corporation.
[ 2.758893] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 2.759868] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 2.771063] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.772041] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.783004] tg3.c:v3.102 (September 1, 2009)
[ 2.783945] xen: registering gsi 36 triggering 0 polarity 1
[ 2.783945] alloc irq_desc for 36 on node 0
[ 2.783945] alloc kstat_irqs on node 0
[ 2.801391] xen: --> irq=36
(XEN) irq 36 vec 113
[ 2.806163] tg3 0000:08:04.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[ 2.821813] eth0: Tigon3 [partno(BCM95715) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:e0:81:80:1d:a0
[ 2.822573] eth0: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 2.822573] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.822573] eth0: dma_rwctrl[76148000] dma_mask[64-bit]
[ 2.822573] xen: registering gsi 36 triggering 0 polarity 1
[ 2.822573] xen_allocate_pirq: returning irq 36 for gsi 36
[ 2.822573] xen: --> irq=36
(XEN) PHYSDEVOP_setup_gsi: mp_register_gsi returned -17
[ 2.869586] Already setup the GSI :36
[ 2.870568] tg3 0000:08:04.1: PCI INT B -> GSI 36 (level, low) -> IRQ 36
[ 2.890194] eth1: Tigon3 [partno(BCM95715) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:e0:81:80:1d:a1
[ 2.891068] eth1: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 2.891068] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.891068] eth1: dma_rwctrl[76148000] dma_mask[64-bit]
[ 2.919250] sky2 driver version 1.25
[ 2.923297] tun: Universal TUN/TAP device driver, 1.6
[ 2.924277] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.934968] console [netcon0] enabled
[ 2.935940] netconsole: network logging started
[ 2.935940] Fusion MPT base driver 3.04.12
[ 2.935940] Copyright (c) 1999-2008 LSI Corporation
[ 2.935940] Fusion MPT SPI Host driver 3.04.12
[ 2.957084] Fusion MPT FC Host driver 3.04.12
[ 2.961705] Fusion MPT SAS Host driver 3.04.12
[ 2.962681] xen: registering gsi 35 triggering 0 polarity 1
[ 2.962681] alloc irq_desc for 35 on node 0
[ 2.962681] alloc kstat_irqs on node 0
[ 2.980299] xen: --> irq=35
(XEN) irq 35 vec 121
[ 2.985070] mptsas 0000:06:00.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35
[ 2.992335] mptbase: ioc0: Initiating bringup
[ 3.276038] ioc0: LSISAS1064E B1: Capabilities={Initiator}
[ 3.277016] mptsas 0000:06:00.0: setting latency timer to 64
[ 8.329836] scsi0 : ioc0: LSISAS1064E B1, FwRev=010a0000h, Ports=1, MaxQ=511, IRQ=35
[ 8.359755] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.360732] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[ 8.372712] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
[ 8.373398] xen: registering gsi 10 triggering 0 polarity 1
[ 8.373398] xen_allocate_pirq: returning irq 10 for gsi 10
[ 8.373398] xen: --> irq=10
(XEN) irq 10 v57: move_in_progress
(XEN) assign_irq_vector: __asign_irq_vector returned -16
(XEN) io_apic_set_pci_routing: assign_irq_vector returned -16
(XEN) PHYSDEVOP_setup_gsi: mp_register_gsi returned -16
[ 8.411121] Failed to setup GSI :10, err_code:-16
[ 8.412102] ehci_hcd 0000:00:03.2: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
[ 8.412102] ehci_hcd 0000:00:03.2: EHCI Host Controller
[ 8.412102] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file 'devices'
[ 8.412102] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 8.448446] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
[ 8.449423] ehci_hcd 0000:00:03.2: reset hcs_params 0x2214 dbg=0 cc=2 pcc=2 ordered ports=4
[ 8.449423] ehci_hcd 0000:00:03.2: reset hcc_params a010 thresh 1 uframes 1024
[ 8.449423] ehci_hcd 0000:00:03.2: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
[ 8.449423] ehci_hcd 0000:00:03.2: ...powerup ports...
[ 8.507050] ehci_hcd 0000:00:03.2: MWI active
[ 8.508019] ehci_hcd 0000:00:03.2: supports USB remote wakeup
(XEN) irq 10 v57: move_in_progress
[ 8.508019] ehci_hcd 0000:00:03.2: irq 10, io mem 0xd8512000
[ 8.508019] ehci_hcd 0000:00:03.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 8.508019] ehci_hcd 0000:00:03.2: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 8.543332] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
[ 8.549215] usb usb1: default language 0x0409
[ 8.553657] usb usb1: udev 1, busnum 1, minor = 0
[ 8.554622] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.554622] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.554622] usb usb1: Product: EHCI Host Controller
[ 8.554622] usb usb1: Manufacturer: Linux 2.6.32.17 ehci_hcd
[ 8.554622] usb usb1: SerialNumber: 0000:00:03.2
[ 8.588189] usb usb1: usb_probe_device
[ 8.589161] usb usb1: configuration #1 chosen from 1 choice
[ 8.597656] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 8.603662] hub 1-0:1.0: usb_probe_interface
[ 8.604633] hub 1-0:1.0: usb_probe_interface - got id
[ 8.604633] hub 1-0:1.0: USB hub found
[ 8.616973] hub 1-0:1.0: 4 ports detected
[ 8.617949] hub 1-0:1.0: standalone hub
[ 8.617949] hub 1-0:1.0: individual port power switching
[ 8.617949] hub 1-0:1.0: individual port over-current protection
[ 8.617949] hub 1-0:1.0: power on to power good time: 20ms
[ 8.641961] hub 1-0:1.0: local power source is good
[ 8.642935] hub 1-0:1.0: enabling power on all ports
[ 8.652006] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 8.661421] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.662395] ohci_hcd: block sizes: ed 64 td 64
[ 8.662395] xen: registering gsi 10 triggering 0 polarity 1
[ 8.662395] xen_allocate_pirq: returning irq 10 for gsi 10
[ 8.662395] xen: --> irq=10
(XEN) PHYSDEVOP_setup_gsi: mp_register_gsi returned -17
[ 8.691199] Already setup the GSI :10
[ 8.692182] ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
[ 8.692182] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 8.692182] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002'
[ 8.717992] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 8.718969] ohci_hcd 0000:00:03.0: created debug files
[ 8.718969] ohci_hcd 0000:00:03.0: supports USB remote wakeup
[ 8.718969] ohci_hcd 0000:00:03.0: irq 10, io mem 0xd8510000
[ 8.751062] ehci_hcd 0000:00:03.2: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT
[ 8.759309] hub 1-0:1.0: port 2: status 0501 change 0001
[ 8.793058] ohci_hcd 0000:00:03.0: OHCI controller state
[ 8.794020] ohci_hcd 0000:00:03.0: OHCI 1.0, NO legacy support registers
[ 8.794020] ohci_hcd 0000:00:03.0: control 0x283 RWC HCFS=operational CBSR=3
[ 8.794020] ohci_hcd 0000:00:03.0: cmdstatus 0x00000 SOC=0
[ 8.794020] ohci_hcd 0000:00:03.0: intrstatus 0x00000044 RHSC SF
[ 8.794020] ohci_hcd 0000:00:03.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 8.794020] ohci_hcd 0000:00:03.0: hcca frame #0026
[ 8.794020] ohci_hcd 0000:00:03.0: roothub.a 00000202 POTPGT=0 NPS NDP=2(2)
[ 8.794020] ohci_hcd 0000:00:03.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 8.794020] ohci_hcd 0000:00:03.0: roothub.status 00008000 DRWE
[ 8.794020] ohci_hcd 0000:00:03.0: roothub.portstatus [0] 0x00000100 PPS
[ 8.794020] ohci_hcd 0000:00:03.0: roothub.portstatus [1] 0x00000100 PPS
[ 8.869145] usb usb2: default language 0x0409
[ 8.869155] hub 1-0:1.0: state 7 ports 4 chg 0004 evt 0000
[ 8.869185] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 8.869206] ehci_hcd 0000:00:03.2: port 2 low speed --> companion
[ 8.891645] usb usb2: udev 1, busnum 2, minor = 128
[ 8.892610] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.892610] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.892610] usb usb2: Product: OHCI Host Controller
[ 8.892610] usb usb2: Manufacturer: Linux 2.6.32.17 ohci_hcd
[ 8.892610] usb usb2: SerialNumber: 0000:00:03.0
[ 8.926344] usb usb2: usb_probe_device
[ 8.927098] ehci_hcd 0000:00:03.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
[ 8.927317] usb usb2: configuration #1 chosen from 1 choice
[ 8.944065] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 8.950075] hub 2-0:1.0: usb_probe_interface
[ 8.951047] hub 2-0:1.0: usb_probe_interface - got id
[ 8.951047] hub 2-0:1.0: USB hub found
[ 8.963379] hub 2-0:1.0: 2 ports detected
[ 8.964354] hub 2-0:1.0: standalone hub
[ 8.964354] hub 2-0:1.0: no power switching (usb 1.0)
[ 8.964354] hub 2-0:1.0: global over-current protection
[ 8.964354] hub 2-0:1.0: power on to power good time: 0ms
[ 8.987234] hub 2-0:1.0: local power source is good
[ 8.988206] hub 2-0:1.0: no over-current condition exists
[ 8.988206] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 9.004629] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 9.013843] xen: registering gsi 10 triggering 0 polarity 1
[ 9.014774] xen_allocate_pirq: returning irq 10 for gsi 10
[ 9.014774] xen: --> irq=10
(XEN) PHYSDEVOP_setup_gsi: mp_register_gsi returned -17
[ 9.032820] Already setup the GSI :10
[ 9.033802] ohci_hcd 0000:00:03.1: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
[ 9.033802] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 9.033802] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003'
[ 9.059651] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 9.067203] ohci_hcd 0000:00:03.1: created debug files
[ 9.068168] ohci_hcd 0000:00:03.1: supports USB remote wakeup
[ 9.068168] ohci_hcd 0000:00:03.1: irq 10, io mem 0xd8511000
[ 9.104062] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
[ 9.112996] hub 2-0:1.0: port 2: status 0301 change 0001
[ 9.134060] ohci_hcd 0000:00:03.1: OHCI controller state
[ 9.135019] ohci_hcd 0000:00:03.1: OHCI 1.0, NO legacy support registers
[ 9.135019] ohci_hcd 0000:00:03.1: control 0x283 RWC HCFS=operational CBSR=3
[ 9.135019] ohci_hcd 0000:00:03.1: cmdstatus 0x00000 SOC=0
[ 9.135019] ohci_hcd 0000:00:03.1: intrstatus 0x00000044 RHSC SF
[ 9.135019] ohci_hcd 0000:00:03.1: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 9.135019] ohci_hcd 0000:00:03.1: hcca frame #0026
[ 9.135019] ohci_hcd 0000:00:03.1: roothub.a 00000202 POTPGT=0 NPS NDP=2(2)
[ 9.135019] ohci_hcd 0000:00:03.1: roothub.b 00000000 PPCM=0000 DR=0000
[ 9.135019] ohci_hcd 0000:00:03.1: roothub.status 00008000 DRWE
[ 9.135019] ohci_hcd 0000:00:03.1: roothub.portstatus [0] 0x00000100 PPS
[ 9.135019] ohci_hcd 0000:00:03.1: roothub.portstatus [1] 0x00000100 PPS
[ 9.210163] usb usb3: default language 0x0409
[ 9.214607] usb usb3: udev 1, busnum 3, minor = 256
[ 9.215571] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.215571] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.215571] usb usb3: Product: OHCI Host Controller
[ 9.215571] usb usb3: Manufacturer: Linux 2.6.32.17 ohci_hcd
[ 9.215571] usb usb3: SerialNumber: 0000:00:03.1
[ 9.249145] hub 2-0:1.0: stat(XEN) send_cleanup_vector: Done moving vec 105
e 7 ports 2 chg (XEN) send_cleanup_vector: Done moving vec 41
0004 evt 0000
[ 9.249375] usb usb3: usb_pro(XEN) irq 8 v65: move_in_progress
be_device
[ 9.249379] usb usb3: configuration #1 chosen from 1 choice
[ 9.249390] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 9.249495] hub 3-0:1.0: usb_probe_interface
[ 9.249498] hub 3-0:1.0: usb_probe_interface - got id
[ 9.249502] hub 3-0:1.0: USB hub found
[ 9.250488] hub 3-0:1.0: 2 ports detected
[ 9.250491] hub 3-0:1.0: standalone hub
[ 9.250493] hub 3-0:1.0: no power switching (usb 1.0)
[ 9.250496] hub 3-0:1.0: global over-current protection
[ 9.250498] hub 3-0:1.0: power on to power good time: 0ms
[ 9.250508] hub 3-0:1.0: local power source is good
[ 9.250511] hub 3-0:1.0: no over-current condition exists
[ 9.250514] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 9.250543] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 9.250747] uhci_hcd: USB Universal Host Controller Interface driver
[ 9.251006] usbcore: registered new interface driver usblp
[ 9.251011] Initializing USB Mass Storage driver...
[ 9.251125] usbcore: registered new interface driver usb-storage
[ 9.251129] USB Mass Storage support registered.
[ 9.251254] usbcore: registered new interface driver libusual
[ 9.251475] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 9.263675] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.263675] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 9.264554] mice: PS/2 mouse device common for all mice
[ 9.265360] rtc_cmos 00:06: RTC can wake from S4
[ 9.265504] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 9.266474] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 9.269522] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 9.270231] cpuidle: using governor ladder
[ 9.270235] cpuidle: using governor menu
[ 9.273001] usbcore: registered new interface driver hiddev
[ 9.273098] usbcore: registered new interface driver usbhid
[ 9.273103] usbhid: v2.6:USB HID core driver
[ 9.273435] Advanced Linux Sound Architecture Driver Version 1.0.21.
[ 9.456555] hmodprobe: FATAL: Could not load /lib/modules/2.6.32.17/modules.dep: No such file or directoryub 2-0:1.0: port
2, status 0301,\r change 0000, 1.
5 Mb/s
[ 9.472346] ALSA device list:
[ 9.473325] No soundcards found.
[ 9.473325] Netfilter messages via NETLINK v0.30.
[ 9.483760] nf_conntrack version 0.5.0 (12072 buckets, 48288 max)
[ 9.490592] ctnetlink v0.93: registering with nfnetlink.
[ 9.491468] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.502923] TCP cubic registered
[ 9.503170] Initializing XFRM netlink socket
[ 9.511359] NET: Registered protocol family 10
[ 9.517762] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 9.518161] IPv6 over IPv4 tunneling driver
[ 9.528974] NET: Registered protocol family 17
[ 9.533718] Using IPI No-Shortcut mode
[ 9.537919] PM: Resume from disk failed.
[ 9.538908] registered taskstats version 1
[ 9.547340] Magic number: 6:723:893
[ 9.551361] Freeing unused kernel memory: 460k freed
[ 9.559724] Write protecting the kernel text: 4912k
[ 9.566214] Write protecting the kernel read-only data: 2364k
Loading, please wait...
[ 9.577045] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 9.637104] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 10.453126] ohci_hcd 0000:00:03.1: auto-stop root hub
[ 10.607670] sata_svw 0000:01:0e.0: version 2.3
[ 10.612751] ACPI: PCI Interrupt Link [LNKS] enabled at IRQ 11
[ 10.613420] xen: registering (XEN) send_cleanup_vector: Done moving vec 216
gsi 11 triggerin(XEN) irq 15 v208: move_in_progress
g 0 polarity 1
[ 10.630482] scsi1 : pata_serverworks
[ 10.630975] scsi2 : pata_serverworks
[ 10.631769] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0x4800 irq 14
[ 10.631776] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0x4808 irq 15
[ 10.653669] xen_allocate_pirq: returning irq 11 for gsi 11
[ 10.654476] xen: --> irq=11
(XEN) irq 11 v49: move_in_progress
(XEN) assign_irq_vector: __asign_irq_vector returned -16
(XEN) io_apic_set_pci_routing: assign_irq_vector returned -16
(XEN) PHYSDEVOP_setup_gsi: mp_register_gsi returned -16
[ 10.681308] Failed to setup GSI :11, err_code:-16
[ 10.682290] sata_svw 0000:01:0e.0: PCI INT A -> Link[LNKS] -> GSI 11 (level, low) -> IRQ 11
(XEN) irq 11 v49: move_in_progress
[ 10.699430] scsi3 : sata_svw
[ 10.702837] scsi4 : sata_svw
[ 10.706053] scsi5 : sata_svw
[ 10.709352] scsi6 : sata_svw
[ 10.712642] ata3: SATA max UDMA/133 mmio m8192@0xd8300000 port 0xd8300000 irq 11
[ 10.720163] ata4: SATA max UDMA/133 mmio m8192@0xd8300000 port 0xd8300100 irq 11
[ 10.727712] ata5: SATA max UDMA/133 mmio m8192@0xd8300000 port 0xd8300200 irq 11
[ 10.728676] ata6: SATA max UDMA/133 mmio m8192@0xd8300000 port 0xd8300300 irq 11
[ 10.743016] xen: registering gsi 11 triggering 0 polarity 1
[ 10.743840] xen_allocate_pirq: returning irq 11 for gsi 11
[ 10.743840] xen: --> irq=11
(XEN) PHYSDEVOP_setup_gsi: mp_register_gsi returned -17
[ 10.762089] Already setup the GSI :11
[ 10.763050] sata_svw 0000:01:0e.1: PCI INT A -> Link[LNKS] -> GSI 11 (level, low) -> IRQ 11
[ 10.802627] ata1.01: ATAPI: DV-28E-R, 1.8A, max UDMA/33
[ 10.830728] ata1.01: configured for UDMA/33
[ 10.839913] scsi 1:0:1:0: CD-ROM TEAC DV-28E-R 1.8A PQ: 0 ANSI: 5
[ 10.858661] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 10.859474] Uniform CD-ROM driver Revision: 3.20
[ 10.870112] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 10.875198] sr 1:0:1:0: Attached scsi generic sg0 type 5
[ 11.049146] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 11.700066] hub 1-0:1.0: hub_suspend
[ 11.703747] usb usb1: bus auto-suspend
[ 11.704688] ehci_hcd 0000:00:03.2: suspend root hub
[ 14.643048] ohci_hcd 0000:00:03.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
(XEN) send_cleanup_vector: Done moving vec 49
[ 16.058128] a(XEN) irq 11 v49: move_cleanup_count
ta3.00: qc timeout (cmd 0x27)
[ 16.059019] ata3.00: failed to read native max address (err_mask=0x4)
[ 16.059019] ata3.00: HPA support seems broken, skipping HPA handling
[ 16.385071] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 16.394249] ata3.00: ATA-7: ST3160815AS, 3.AAC, max UDMA/133
[ 16.395019] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 16.412274] ata3.00: configured for UDMA/133
[ 16.416799] scsi 3:0:0:0: Direct-Access ATA ST3160815AS 3.AA PQ: 0 ANSI: 5
[ 16.425359] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 16.425550] sd 3:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 16.425656] sd 3:0:0:0: [sda] Write Protect is off
[ 16.425660] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 16.425709] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 16.426055] sda:
[ 16.764072] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 21.773066] ata4.00: qc timeout (cmd 0x27)
[ 21.774017] ata4.00: failed to read native max address (err_mask=0x4)
[ 21.774017] ata4.00: HPA support seems broken, skipping HPA handling
[ 22.093067] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 22.102274] ata4.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[ 22.103019] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 22.119298] ata4.00: configured for UDMA/133
[ 22.123906] scsi 4:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5
[ 22.132453] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 22.132485] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 22.132581] sd 4:0:0:0: [sdb] Write Protect is off
[ 22.132584] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 22.132633] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.132922] sdb:
[ 22.472017] ata5: SATA link down (SStatus 4 SControl 300)
[ 22.793017] ata6: SATA link down (SStatus 4 SControl 300)
[-- Attachment #3: interrupt-bug-hunt.diff --]
[-- Type: text/x-diff, Size: 2715 bytes --]
diff -r fe930e1b2ce8 xen/arch/x86/io_apic.c
--- a/xen/arch/x86/io_apic.c Fri Aug 06 18:35:02 2010 +0100
+++ b/xen/arch/x86/io_apic.c Tue Aug 10 14:36:14 2010 +0100
@@ -446,6 +446,7 @@
genapic->send_IPI_mask(&cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
cfg->move_in_progress = 0;
+ printk("%s: Done moving vec %d\n", __func__, cfg->vector);
}
void irq_complete_move(struct irq_desc **descp)
@@ -2266,7 +2267,10 @@
vector = assign_irq_vector(irq);
if (vector < 0)
+ {
+ printk("%s: assign_irq_vector returned %d\n", __func__, vector);
return vector;
+ }
entry.vector = vector;
apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry "
diff -r fe930e1b2ce8 xen/arch/x86/irq.c
--- a/xen/arch/x86/irq.c Fri Aug 06 18:35:02 2010 +0100
+++ b/xen/arch/x86/irq.c Tue Aug 10 14:36:14 2010 +0100
@@ -201,6 +201,7 @@
}
cfg->move_in_progress = 0;
+ printk("Done moving irq %d v %d\n", irq, cfg->vector);
}
void clear_irq_vector(int irq)
@@ -349,7 +350,13 @@
cpumask_t tmp_mask;
if ((cfg->move_in_progress) || cfg->move_cleanup_count)
+ {
+ if (cfg->move_in_progress)
+ printk("irq %d v%d: move_in_progress\n", irq, cfg->vector);
+ if (cfg->move_cleanup_count)
+ printk("irq %d v%d: move_cleanup_count\n", irq, cfg->vector);
return -EBUSY;
+ }
old_vector = irq_to_vector(irq);
if (old_vector) {
@@ -391,9 +398,11 @@
if (per_cpu(vector_irq, new_cpu)[vector] != -1)
goto next;
/* Found one! */
+ printk("irq %d vec %d\n", irq, vector);
current_vector = vector;
current_offset = offset;
if (old_vector) {
+ printk("irq %d moving vector %u\n", irq, old_vector);
cfg->move_in_progress = 1;
cpus_copy(cfg->old_domain, cfg->domain);
}
@@ -422,7 +431,9 @@
spin_lock_irqsave(&vector_lock, flags);
ret = __assign_irq_vector(irq, cfg, TARGET_CPUS);
- if (!ret) {
+ if ( ret < 0 )
+ printk("%s: __asign_irq_vector returned %d\n", __func__, ret);
+ else if (ret == 0) {
ret = cfg->vector;
cpus_copy(desc->affinity, cfg->domain);
}
diff -r fe930e1b2ce8 xen/arch/x86/physdev.c
--- a/xen/arch/x86/physdev.c Fri Aug 06 18:35:02 2010 +0100
+++ b/xen/arch/x86/physdev.c Tue Aug 10 14:36:14 2010 +0100
@@ -478,6 +478,8 @@
break;
ret = mp_register_gsi(setup_gsi.gsi, setup_gsi.triggering,
setup_gsi.polarity);
+ if ( ret < 0 )
+ printk("PHYSDEVOP_setup_gsi: mp_register_gsi returned %d\n", (int)ret);
break;
}
default:
[-- Attachment #4: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: IRQs, move_in_progress, -EBUSY &c
2010-08-11 14:56 IRQs, move_in_progress, -EBUSY &c George Dunlap
@ 2010-08-11 15:04 ` Keir Fraser
2010-08-11 15:38 ` Jeremy Fitzhardinge
2010-08-11 15:59 ` Keir Fraser
2 siblings, 0 replies; 10+ messages in thread
From: Keir Fraser @ 2010-08-11 15:04 UTC (permalink / raw)
To: George Dunlap, xen-devel@lists.xensource.com, Jeremy Fitzhardinge,
Konrad Rzeszutek Wilk <konrad.wilk>
On 11/08/2010 15:56, "George Dunlap" <George.Dunlap@eu.citrix.com> wrote:
> However, it seems that moving IRQs is not handled properly. Either
> the pvops kernel should retry if it gets an -EBUSY, or the hypercall
> should not fail, but wait until it can return success.
Move_in_progress is a private hypervisor implementation detail. We shouldn't
make it visible to the guest via EBUSY. Worst case we should be turning the
retry into a hypercall continuation. Even better if we don't need to make
the IRQ bind request wait at all... Not sure why that needs to happen at
all.
-- Keir
> I discovered all this by adding debug statements to the IRQ path; the
> patch is attached, if anyone else wants to use it.
>
> -George
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: IRQs, move_in_progress, -EBUSY &c
2010-08-11 14:56 IRQs, move_in_progress, -EBUSY &c George Dunlap
2010-08-11 15:04 ` Keir Fraser
@ 2010-08-11 15:38 ` Jeremy Fitzhardinge
2010-08-11 15:59 ` Keir Fraser
2 siblings, 0 replies; 10+ messages in thread
From: Jeremy Fitzhardinge @ 2010-08-11 15:38 UTC (permalink / raw)
To: George Dunlap; +Cc: xen-devel, Keir Fraser, Konrad Rzeszutek Wilk
On 08/11/2010 07:56 AM, George Dunlap wrote:
> Going backwards to the root of the problem: The root device times out
> even though the device driver successfully loads and sees the device
> -- it complains about missing interrupts. It misses interrupts
> because the PHYSDEVOP_setup_gsi returns -16, EBUSY, and the pvops
> kernel doesn't retry; so the gsi is never set up.
Aside from any of the other issues, EBUSY doesn't generally suggest that
the caller should try again. That would be EAGAIN.
J
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: IRQs, move_in_progress, -EBUSY &c
2010-08-11 14:56 IRQs, move_in_progress, -EBUSY &c George Dunlap
2010-08-11 15:04 ` Keir Fraser
2010-08-11 15:38 ` Jeremy Fitzhardinge
@ 2010-08-11 15:59 ` Keir Fraser
2010-08-11 17:49 ` George Dunlap
2 siblings, 1 reply; 10+ messages in thread
From: Keir Fraser @ 2010-08-11 15:59 UTC (permalink / raw)
To: George Dunlap, xen-devel@lists.xensource.com, Jeremy Fitzhardinge,
Konrad Rzeszutek Wilk <konrad.wilk>
[-- Attachment #1: Type: text/plain, Size: 463 bytes --]
On 11/08/2010 15:56, "George Dunlap" <George.Dunlap@eu.citrix.com> wrote:
> However, it seems that moving IRQs is not handled properly. Either
> the pvops kernel should retry if it gets an -EBUSY, or the hypercall
> should not fail, but wait until it can return success.
Can you try the attached patch?
Thanks,
Keir
> I discovered all this by adding debug statements to the IRQ path; the
> patch is attached, if anyone else wants to use it.
>
> -George
[-- Attachment #2: 00-gsi-retry --]
[-- Type: application/octet-stream, Size: 526 bytes --]
diff -r f45026ec8db5 xen/arch/x86/physdev.c
--- a/xen/arch/x86/physdev.c Mon Aug 09 18:29:50 2010 +0100
+++ b/xen/arch/x86/physdev.c Wed Aug 11 16:58:14 2010 +0100
@@ -478,6 +478,9 @@
break;
ret = mp_register_gsi(setup_gsi.gsi, setup_gsi.triggering,
setup_gsi.polarity);
+ if ( ret == -EBUSY ) /* IRQ is being moved */
+ ret = hypercall_create_continuation(
+ __HYPERVISOR_physdev_op, "ih", cmd, arg);
break;
}
default:
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Re: IRQs, move_in_progress, -EBUSY &c
2010-08-11 15:59 ` Keir Fraser
@ 2010-08-11 17:49 ` George Dunlap
2010-08-11 18:18 ` Keir Fraser
0 siblings, 1 reply; 10+ messages in thread
From: George Dunlap @ 2010-08-11 17:49 UTC (permalink / raw)
To: Keir Fraser
Cc: Jeremy Fitzhardinge, xen-devel@lists.xensource.com,
Konrad Rzeszutek Wilk
[-- Attachment #1: Type: text/plain, Size: 1190 bytes --]
Seems to work about 50/50.
Attached is a log of a successful boot (exile.008.log), and a failed
boot (exile.009.log). Suspicious things about the failed case: the
usb code starts to initialize before the SATA code finishes
initializing, and complains that "Controller is probably using the
wrong IRQ".
Keir: the machine in question (as you may have guessed) is exile; let
me know if you want to grab it and use it directly.
-George
On Wed, Aug 11, 2010 at 4:59 PM, Keir Fraser <keir.fraser@eu.citrix.com> wrote:
> On 11/08/2010 15:56, "George Dunlap" <George.Dunlap@eu.citrix.com> wrote:
>
>> However, it seems that moving IRQs is not handled properly. Either
>> the pvops kernel should retry if it gets an -EBUSY, or the hypercall
>> should not fail, but wait until it can return success.
>
> Can you try the attached patch?
>
> Thanks,
> Keir
>
>> I discovered all this by adding debug statements to the IRQ path; the
>> patch is attached, if anyone else wants to use it.
>>
>> -George
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
>
[-- Attachment #2: exile.008.log --]
[-- Type: text/x-log, Size: 77691 bytes --]
__ __ _ _ _ _ _ _
\ \/ /___ _ __ | || | / | _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ | || |_ | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | |__ _|| |__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |_|(_)_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 4.1-unstable (gdunlap@uk.xensource.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) Wed Aug 11 13:18:32 EDT 2010
(XEN) Latest ChangeSet: unavailable
(XEN) Console output is synchronous.
(XEN) Bootloader: COM32 Multiboot loader v0.2
(XEN) Command line: com1=115200,8n1 console=com1,tty sync_console console_to_ring dom0_mem=768M loglvl=all
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 2 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009c400 (usable)
(XEN) 000000000009c400 - 00000000000a0000 (reserved)
(XEN) 00000000000ce000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cfee0000 (usable)
(XEN) 00000000cfee0000 - 00000000cfee5000 (ACPI data)
(XEN) 00000000cfee5000 - 00000000cfef1000 (ACPI NVS)
(XEN) 00000000cfef1000 - 00000000d0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec03000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000fff80000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000130000000 (usable)
(XEN) ACPI: RSDP 000F8080, 0024 (r2 PTLTD )
(XEN) ACPI: XSDT CFEE01FE, 005C (r1 BRCM EXPLOSN 6040000 PTL 2000001)
(XEN) ACPI: FACP CFEE02CE, 00F4 (r3 BRCM EXPLOSN 6040000 MSFT 2000001)
(XEN) ACPI Warning (tbfadt-0444): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/C [20070126]
(XEN) ACPI: DSDT CFEE03C2, 4949 (r2 BRCM EXPLOSN 6040000 MSFT 3000000)
(XEN) ACPI: FACS CFEF0FC0, 0040
(XEN) ACPI: TCPA CFEE4D0B, 0032 (r1 BRCM EXPLOSN 6040000 PTL 20000001)
(XEN) ACPI: SRAT CFEE4D3D, 0128 (r1 AMD FAM_F_10 6040000 AMD 1)
(XEN) ACPI: HPET CFEE4E65, 0038 (r1 BRCM EXPLOSN 6040000 BRCM 2000001)
(XEN) ACPI: SSDT CFEE4E9D, 0049 (r1 BRCM PRT0 6040000 BRCM 2000001)
(XEN) ACPI: SPCR CFEE4EE6, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
(XEN) ACPI: APIC CFEE4F36, 00CA (r1 BRCM EXPLOSN 6040000 PTL 2000001)
(XEN) System RAM: 4094MB (4192752kB)
(XEN) SRAT: PXM 0 -> APIC 0 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 1 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 2 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 3 -> Node 0
(XEN) SRAT: PXM 1 -> APIC 4 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 5 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 6 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 7 -> Node 1
(XEN) SRAT: Node 0 PXM 0 0-a0000
(XEN) SRAT: Node 0 PXM 0 100000-d0000000
(XEN) SRAT: Node 0 PXM 0 100000000-130000000
(XEN) NUMA: Allocated memnodemap from 12fdfd000 - 12fdff000
(XEN) NUMA: Using 8 for the hash shift.
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f80b0
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x508
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[544,504], pm1x_evt[500,540]
(XEN) ACPI: wakeup_vec[cfef0fcc], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
(XEN) Processor #3 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
(XEN) Processor #4 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
(XEN) Processor #5 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
(XEN) Processor #6 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
(XEN) Processor #7 0:4 APIC version 16
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15
(XEN) ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16])
(XEN) IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31
(XEN) ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32])
(XEN) IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) Enabling APIC mode: Flat. Using 3 I/O APICs
(XEN) ACPI: HPET id: 0x1166a201 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 1995.057 MHz processor.
(XEN) Initing memory sharing.
(XEN) AMD Fam10h machine check reporting enabled
(XEN) AMD-Vi: IOMMU not found!
(XEN) I/O virtualisation disabled
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 14.318MHz HPET
XEN) Allocated console ring of 64 KiB.
(XEN) HVM: ASIDs enabled.
(XEN) HVM: SVM enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Brought up 8 CPUs
(XEN) tmem: initialized comp=0 dedup=0 tze=0 global-lock=0
(XEN) HPET: 3 timers in total, 0 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) MCA: Use hw thresholding to adjust polling frequency
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) Xenoprofile: Failed to setup IBS LVT offset, IBSCTL = 0xffffffff*** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x1000000 -> 0x1a04000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000012a000000->000000012c000000 (188416 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: 00000000c1000000->00000000c1a04000
(XEN) Init. ramdisk: 00000000c1a04000->00000000c1d1ae00
(XEN) Phys-Mach map: 00000000c1d1b000->00000000c1ddb000
(XEN) Start info: 00000000c1ddb000->00000000c1ddb4b4
(XEN) Page tables: 00000000c1ddc000->00000000c1df2000
(XEN) Boot stack: 00000000c1df2000->00000000c1df3000
(XEN) TOTAL: 00000000c0000000->00000000c2000000
(XEN) ENTRY ADDRESS: 00000000c17a6000
(XEN) Dom0 has maximum 8 VCPUs
(XEN) Scrubbing Free RAM: ................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 176kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Reserving virtual address space above 0xff800000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.17 (root@exile) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #4 SMP Fri Aug 6 17:19:19 BST 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009c400 (usable)
[ 0.000000] Xen: 000000000009c400 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000030000000 (usable)
[ 0.000000] Xen: 00000000cfee0000 - 00000000cfee5000 (ACPI data)
[ 0.000000] Xen: 00000000cfee5000 - 00000000cfef1000 (ACPI NVS)
[ 0.000000] Xen: 00000000cfef1000 - 00000000d0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec03000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x30000 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009c400 (usable)
[ 0.000000] modified: 000000000009c400 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000030000000 (usable)
[ 0.000000] modified: 00000000cfee0000 - 00000000cfee5000 (ACPI data)
[ 0.000000] modified: 00000000cfee5000 - 00000000cfef1000 (ACPI NVS)
[ 0.000000] modified: 00000000cfef1000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec03000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 027ff000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000030000000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0030000000 page 4k
[ 0.000000] kernel direct mapping tables up to 30000000 @ 100000-284000
[ 0.000000] RAMDISK: 01a04000 - 01d1ae00
[ 0.000000] ACPI: RSDP 000f8080 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT cfee01fe 0005C (v01 BRCM EXPLOSN 06040000 PTL 02000001)
[ 0.000000] ACPI: FACP cfee02ce 000F4 (v03 BRCM EXPLOSN 06040000 MSFT 02000001)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/C (20090903/tbfadt-557)
[ 0.000000] ACPI: DSDT cfee03c2 04949 (v02 BRCM EXPLOSN 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS cfef0fc0 00040
[ 0.000000] ACPI: TCPA cfee4d0b 00032 (v01 BRCM EXPLOSN 06040000 PTL 20000001)
[ 0.000000] ACPI: SRAT cfee4d3d 00128 (v01 AMD FAM_F_10 06040000 AMD 00000001)
[ 0.000000] ACPI: HPET cfee4e65 00038 (v01 BRCM EXPLOSN 06040000 BRCM 02000001)
[ 0.000000] ACPI: SSDT cfee4e9d 00049 (v01 BRCM PRT0 06040000 BRCM 02000001)
[ 0.000000] ACPI: SPCR cfee4ee6 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
[ 0.000000] ACPI: APIC cfee4f36 000CA (v01 BRCM EXPLOSN 06040000 PTL 02000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 768MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 30000000
[ 0.000000] low ram: 0 - 30000000
[ 0.000000] node 0 low ram: 00000000 - 30000000
[ 0.000000] node 0 bootmap 00010000 - 00016000
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 0030000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0001dde000 - 0001df4000] XEN PAGETABLES ==> [0001dde000 - 0001df4000]
[ 0.000000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #4 [0001000000 - 00018de9a4] TEXT DATA BSS ==> [0001000000 - 00018de9a4]
[ 0.000000] #5 [0001a04000 - 0001d1ae00] RAMDISK ==> [0001a04000 - 0001d1ae00]
[ 0.000000] #6 [0001d1b000 - 0001dde000] XEN START INFO ==> [0001d1b000 - 0001dde000]
[ 0.000000] #7 [00018df000 - 00018df18c] BRK ==> [00018df000 - 00018df18c]
[ 0.000000] #8 [0000100000 - 000026d000] PGTABLE ==> [0000100000 - 000026d000]
[ 0.000000] #9 [0000010000 - 0000016000] BOOTMAP ==> [0000010000 - 0000016000]
[ 0.000000] found SMP MP-table at [c00f80b0] f80b0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00030000
[ 0.000000] HighMem 0x00030000 -> 0x00030000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x00030000
[ 0.000000] On node 0 totalpages: 196492
[ 0.000000] free_area_init_node: node 0, pgdat c1798b60, node_mem_map c1df4200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3948 pages, LIFO batch:0
[ 0.000000] Normal zone: 1504 pages used for memmap
[ 0.000000] Normal zone: 191008 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16])
[ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec01000, GSI 16-16
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32])
[ 0.000000] IOAPIC[2]: apic_id 10, version 0, address 0xfec02000, GSI 32-32
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x1166a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 288
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:9fee0000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.1-unstable (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @c23fa000 s37048 r0 d24392 u65536
[ 0.000000] pcpu-alloc: s37048 r0 d24392 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] trying to map vcpu_info 0 at c23fb028, mfn 12c886, offset 40
[ 0.000000] cpu 0 using vcpu_info at c23fb028
[ 0.000000] trying to map vcpu_info 1 at c240b028, mfn 12c896, offset 40
[ 0.000000] cpu 1 using vcpu_info at c240b028
[ 0.000000] trying to map vcpu_info 2 at c241b028, mfn 12c8a6, offset 40
[ 0.000000] cpu 2 using vcpu_info at c241b028
[ 0.000000] trying to map vcpu_info 3 at c242b028, mfn 12c8b6, offset 40
[ 0.000000] cpu 3 using vcpu_info at c242b028
[ 0.000000] trying to map vcpu_info 4 at c243b028, mfn 12c8c6, offset 40
[ 0.000000] cpu 4 using vcpu_info at c243b028
[ 0.000000] trying to map vcpu_info 5 at c244b028, mfn 12c8d6, offset 40
[ 0.000000] cpu 5 using vcpu_info at c244b028
[ 0.000000] trying to map vcpu_info 6 at c245b028, mfn 12c8e6, offset 40
[ 0.000000] cpu 6 using vcpu_info at c245b028
[ 0.000000] trying to map vcpu_info 7 at c246b028, mfn 12c8f6, offset 40
[ 0.000000] cpu 7 using vcpu_info at c246b028
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194956
[ 0.000000] Kernel command line: root=/dev/sdb1 ro console=hvc0 earlyprintk=xen nomodeset loglevel=10 debug
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between c253d000 - c653d000
[ 0.000000] DMA: software IO TLB at phys 0x253d000 - 0x653d000
[ 0.000000] xen_swiotlb_fixup: buf=c253d000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=c659d000 size=32768
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 697580k/786432k available (4910k kernel code, 88008k reserved, 2921k data, 460k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xff71d000 - 0xff7ff000 ( 904 kB)
[ 0.000000] pkmap : 0xff200000 - 0xff400000 (2048 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff1fe000 ( 233 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] .init : 0xc17a6000 - 0xc1819000 ( 460 kB)
[ 0.000000] .data : 0xc14cb98a - 0xc17a5f4c (2921 kB)
[ 0.000000] .text : 0xc1000000 - 0xc14cb98a (4910 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:2304
[ 0.000000] xen: --> irq=0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen: --> irq=2
[ 0.000000] xen: --> irq=3
[ 0.000000] xen: --> irq=4
[ 0.000000] xen: --> irq=5
[ 0.000000] xen: --> irq=6
[ 0.000000] xen: --> irq=7
[ 0.000000] xen: --> irq=8
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: --> irq=10
[ 0.000000] xen: --> irq=11
[ 0.000000] xen: --> irq=12
[ 0.000000] xen: --> irq=13
[ 0.000000] xen: --> irq=14
[ 0.000000] xen: --> irq=15
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] xen_acpi_parse_int_src_ovr: intsrc->source_irq == acpi_gbl_FADT.sci_interrupt failed, not registering (0 9)
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] alloc irq_desc for 2303 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] Detected 1995.057 MHz processor.
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.11 BogoMIPS (lpj=1995057)
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Initializing.
[ 0.000999] SELinux: Starting in permissive mode
[ 0.000999] Mount-cache hash table entries: 512
[ 0.001263] Initializing cgroup subsys ns
[ 0.001999] Initializing cgroup subsys cpuacct
[ 0.001999] Initializing cgroup subsys freezer
[ 0.002042] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003019] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003999] CPU: Physical Processor ID: 0
[ 0.003999] CPU: Processor Core ID: 0
[ 0.004023] mce: CPU supports 6 MCE banks
[ 0.005042] Performance Events: AMD PMU driver.
[ 0.005999] ------------[ cut here ]------------
[ 0.005999] WARNING: at /root/xen-unstable.hg/linux-2.6-pvops.git/arch/x86/xen/enlighten.c:742 xen_apic_write+0x12/0x14()
[ 0.005999] Hardware name: empty
[ 0.005999] Modules linked in:
[ 0.005999] Pid: 0, comm: swapper Not tainted 2.6.32.17 #4
[ 0.005999] Call Trace:
[ 0.005999] [<c10622e9>] warn_slowpath_common+0x60/0x90
[ 0.005999] [<c1062326>] warn_slowpath_null+0xd/0x10
[ 0.005999] [<c1029c86>] xen_apic_write+0x12/0x14
[ 0.005999] [<c1038e53>] perf_events_lapic_init+0x2b/0x2d
[ 0.005999] [<c17b0285>] init_hw_perf_events+0x2e5/0x37f
[ 0.005999] [<c17afdf1>] identify_boot_cpu+0x21/0x23
[ 0.005999] [<c17afe9c>] check_bugs+0xb/0x10f
[ 0.005999] [<c10a5c5d>] ? delayacct_init+0x42/0x45
[ 0.005999] [<c17a685e>] start_kernel+0x30b/0x31a
[ 0.005999] [<c17a60a2>] i386_start_kernel+0x91/0x96
[ 0.005999] [<c17a9ef6>] xen_start_kernel+0x5d4/0x5dc
[ 0.005999] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.005999] ... version: 0
[ 0.005999] ... bit width: 48
[ 0.005999] ... generic registers: 4
[ 0.005999] ... value mask: 0000ffffffffffff
[ 0.005999] ... max period: 00007fffffffffff
[ 0.005999] ... fixed-purpose events: 0
[ 0.005999] ... event mask: 000000000000000f
[ 0.007190] SMP alternatives: switching to UP code
[ 0.007998] ACPI: Core revision 20090903
[ 0.020172] alloc irq_desc for 2302 on node 0
[ 0.020996] alloc kstat_irqs on node 0
[ 0.021024] alloc irq_desc for 2301 on node 0
[ 0.021996] alloc kstat_irqs on node 0
[ 0.022021] alloc irq_desc for 2300 on node 0
[ 0.022996] alloc kstat_irqs on node 0
[ 0.022996] alloc irq_desc for 2299 on node 0
[ 0.022996] alloc kstat_irqs on node 0
[ 0.023402] installing Xen timer for CPU 1
[ 0.024013] alloc irq_desc for 2298 on node 0
[ 0.024996] alloc kstat_irqs on node 0
[ 0.025063] SMP alternatives: switching to SMP code
[ 0.030995] alloc irq_desc for 2297 on node 0
[ 0.030995] alloc kstat_irqs on node 0
[ 0.031021] alloc irq_desc for 2296 on node 0
[ 0.031995] alloc kstat_irqs on node 0
[ 0.032021] alloc irq_desc for 2295 on node 0
[ 0.032994] alloc kstat_irqs on node 0
[ 0.032994] alloc irq_desc for 2294 on node 0
[ 0.032994] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#1
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.033403] installing Xen timer for CPU 2
[ 0.034012] alloc irq_desc for 2293 on node 0
[ 0.034994] alloc kstat_irqs on node 0
[ 0.035075] alloc irq_desc for 2292 on node 0
[ 0.035994] alloc kstat_irqs on node 0
[ 0.036020] alloc irq_desc for 2291 on node 0
[ 0.036994] alloc kstat_irqs on node 0
[ 0.037020] alloc irq_desc for 2290 on node 0
[ 0.037994] alloc kstat_irqs on node 0
[ 0.037994] alloc irq_desc for 2289 on node 0
[ 0.037994] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#2
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 2
[ 0.038387] installing Xen timer for CPU 3
[ 0.039011] alloc irq_desc for 2288 on node 0
[ 0.039993] alloc kstat_irqs on node 0
[ 0.040072] alloc irq_desc for 2287 on node 0
[ 0.040993] alloc kstat_irqs on node 0
[ 0.041019] alloc irq_desc for 2286 on node 0
[ 0.041993] alloc kstat_irqs on node 0
[ 0.042019] alloc irq_desc for 2285 on node 0
[ 0.042993] alloc kstat_irqs on node 0
[ 0.042993] alloc irq_desc for 2284 on node 0
[ 0.042993] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#3
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 3
[ 0.043383] installing Xen timer for CPU 4
[ 0.044010] alloc irq_desc for 2283 on node 0
[ 0.044993] alloc kstat_irqs on node 0
[ 0.045071] alloc irq_desc for 2282 on node 0
[ 0.045993] alloc kstat_irqs on node 0
[ 0.046018] alloc irq_desc for 2281 on node 0
[ 0.046992] alloc kstat_irqs on node 0
[ 0.047018] alloc irq_desc for 2280 on node 0
[ 0.047992] alloc kstat_irqs on node 0
[ 0.048023] alloc irq_desc for 2279 on node 0
[ 0.048992] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#4
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 1
[ 0.000999] CPU: Processor Core ID: 0
[ 0.049363] installing Xen timer for CPU 5
[ 0.050010] alloc irq_desc for 2278 on node 0
[ 0.050992] alloc kstat_irqs on node 0
[ 0.051070] alloc irq_desc for 2277 on node 0
[ 0.051992] alloc kstat_irqs on node 0
[ 0.052019] alloc irq_desc for 2276 on node 0
[ 0.052991] alloc kstat_irqs on node 0
[ 0.053019] alloc irq_desc for 2275 on node 0
[ 0.053991] alloc kstat_irqs on node 0
[ 0.053991] alloc irq_desc for 2274 on node 0
[ 0.053991] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#5
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 1
[ 0.000999] CPU: Processor Core ID: 1
[ 0.054357] installing Xen timer for CPU 6
[ 0.055010] alloc irq_desc for 2273 on node 0
[ 0.055991] alloc kstat_irqs on node 0
[ 0.056069] alloc irq_desc for 2272 on node 0
[ 0.056991] alloc kstat_irqs on node 0
[ 0.057018] alloc irq_desc for 2271 on node 0
[ 0.057991] alloc kstat_irqs on node 0
[ 0.058018] alloc irq_desc for 2270 on node 0
[ 0.058991] alloc kstat_irqs on node 0
[ 0.058991] alloc irq_desc for 2269 on node 0
[ 0.058991] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#6
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 1
[ 0.000999] CPU: Processor Core ID: 2
[ 0.059366] installing Xen timer for CPU 7
[ 0.060009] alloc irq_desc for 2268 on node 0
[ 0.060990] alloc kstat_irqs on node 0
[ 0.061068] alloc irq_desc for 2267 on node 0
[ 0.061990] alloc kstat_irqs on node 0
[ 0.062017] alloc irq_desc for 2266 on node 0
[ 0.062990] alloc kstat_irqs on node 0
[ 0.063017] alloc irq_desc for 2265 on node 0
[ 0.063990] alloc kstat_irqs on node 0
[ 0.063990] alloc irq_desc for 2264 on node 0
[ 0.063990] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#7
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 1
[ 0.000999] CPU: Processor Core ID: 3
[ 0.064295] Brought up 8 CPUs
[ 0.067129] Grant table initialized
[ 0.067989] Time: 17:38:11 Date: 08/11/10
[ 0.068090] NET: Registered protocol family 16
[ 0.069161] alloc irq_desc for 2263 on node 0
[ 0.069989] alloc kstat_irqs on node 0
[ 0.070210] ACPI: bus type pci registered
[ 0.071340] PCI: BIOS BUG #32[0000014a] found
[ 0.071989] PCI: Using configuration type 1 for base access
[ 0.071989] PCI: Using configuration type 1 for extended access
[ 0.092043] bio: create slab <bio-0> at 0
[ 0.095985] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.096012] ACPI: EC: Look up EC in DSDT
[ 0.107475] ACPI: Interpreter enabled
[ 0.107983] ACPI: (supports S0 S1 S4 S5)
[ 0.107983] ACPI: Using IOAPIC for interrupt routing
[ 0.145256] ACPI: No dock devices found.
[ 0.145977] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.146128] pci 0000:00:01.0: Enabling HT MSI Mapping
[ 0.147154] pci 0000:00:02.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.147977] pci 0000:00:02.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.147977] pci 0000:00:02.1: reg 18 io port: [0x170-0x177]
[ 0.147977] pci 0000:00:02.1: reg 1c io port: [0x374-0x377]
[ 0.147977] pci 0000:00:02.1: reg 20 io port: [0x4800-0x480f]
[ 0.147977] pci 0000:00:03.0: reg 10 32bit mmio: [0xd8510000-0xd8510fff]
[ 0.147977] pci 0000:00:03.0: reg 14 io port: [0x4c00-0x4cff]
[ 0.147977] pci 0000:00:03.1: reg 10 32bit mmio: [0xd8511000-0xd8511fff]
[ 0.147977] pci 0000:00:03.1: reg 14 io port: [0x5000-0x50ff]
[ 0.147977] pci 0000:00:03.2: reg 10 32bit mmio: [0xd8512000-0xd8512fff]
[ 0.147977] pci 0000:00:03.2: reg 14 io port: [0x5400-0x54ff]
[ 0.147977] pci 0000:00:03.2: supports D1 D2
[ 0.147977] pci 0000:00:03.2: PME# supported from D0 D1 D2 D3hot
[ 0.147977] pci 0000:00:03.2: PME# disabled
[ 0.147977] pci 0000:00:04.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.147977] pci 0000:00:04.0: reg 14 io port: [0x5800-0x58ff]
[ 0.147977] pci 0000:00:04.0: reg 18 32bit mmio: [0xd8500000-0xd850ffff]
[ 0.147977] pci 0000:00:04.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.147977] pci 0000:00:04.0: supports D1 D2
[ 0.147977] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.147977] pci 0000:00:06.0: PME# disabled
[ 0.147977] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.147977] pci 0000:00:07.0: PME# disabled
[ 0.147977] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
[ 0.147977] pci 0000:00:08.0: PME# disabled
[ 0.147977] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.147977] pci 0000:00:09.0: PME# disabled
[ 0.147977] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.147977] pci 0000:00:0a.0: PME# disabled
[ 0.147977] pci 0000:01:0e.0: reg 10 io port: [0x6040-0x6047]
[ 0.147977] pci 0000:01:0e.0: reg 14 io port: [0x6034-0x6037]
[ 0.147977] pci 0000:01:0e.0: reg 18 io port: [0x6038-0x603f]
[ 0.147977] pci 0000:01:0e.0: reg 1c io port: [0x6030-0x6033]
[ 0.147977] pci 0000:01:0e.0: reg 20 io port: [0x6000-0x600f]
[ 0.147977] pci 0000:01:0e.0: reg 24 32bit mmio: [0xd8300000-0xd8301fff]
[ 0.147977] pci 0000:01:0e.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.147977] pci 0000:01:0e.1: reg 10 io port: [0x6058-0x605f]
[ 0.147977] pci 0000:01:0e.1: reg 14 io port: [0x604c-0x604f]
[ 0.147977] pci 0000:01:0e.1: reg 18 io port: [0x6050-0x6057]
[ 0.147977] pci 0000:01:0e.1: reg 1c io port: [0x6048-0x604b]
[ 0.147977] pci 0000:01:0e.1: reg 20 io port: [0x6020-0x602f]
[ 0.147977] pci 0000:00:01.0: bridge io port: [0x6000-0x6fff]
[ 0.147977] pci 0000:00:01.0: bridge 32bit mmio: [0xd8300000-0xd83fffff]
[ 0.147977] pci 0000:06:00.0: reg 10 io port: [0x7000-0x70ff]
[ 0.147977] pci 0000:06:00.0: reg 14 64bit mmio: [0xd8210000-0xd8213fff]
[ 0.147977] pci 0000:06:00.0: reg 1c 64bit mmio: [0xd8200000-0xd820ffff]
[ 0.147977] pci 0000:06:00.0: reg 30 32bit mmio pref: [0x000000-0x0fffff]
[ 0.147977] pci 0000:06:00.0: supports D1 D2
[ 0.147977] pci 0000:00:09.0: bridge io port: [0x7000-0x7fff]
[ 0.147977] pci 0000:00:09.0: bridge 32bit mmio: [0xd8200000-0xd82fffff]
[ 0.148113] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.148977] pci 0000:07:00.0: PME# disabled
[ 0.148977] pci 0000:00:0a.0: bridge 32bit mmio: [0xd8400000-0xd84fffff]
[ 0.148977] pci 0000:08:04.0: reg 10 64bit mmio: [0xd8410000-0xd841ffff]
[ 0.148977] pci 0000:08:04.0: reg 18 64bit mmio: [0xd8400000-0xd840ffff]
[ 0.148977] pci 0000:08:04.0: PME# supported from D3hot D3cold
[ 0.148977] pci 0000:08:04.0: PME# disabled
[ 0.148977] pci 0000:08:04.1: reg 10 64bit mmio: [0xd8430000-0xd843ffff]
[ 0.148977] pci 0000:08:04.1: reg 18 64bit mmio: [0xd8420000-0xd842ffff]
[ 0.148977] pci 0000:08:04.1: PME# supported from D3hot D3cold
[ 0.148977] pci 0000:08:04.1: PME# disabled
[ 0.148977] pci 0000:07:00.0: bridge 32bit mmio: [0xd8400000-0xd84fffff]
[ 0.148977] pci_bus 0000:00: on NUMA node 0
[ 0.148977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.149520] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXB_._PRT]
[ 0.149977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXB_.PPBX._PRT]
[ 0.149977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB0._PRT]
[ 0.149977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB1._PRT]
[ 0.149977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB2._PRT]
[ 0.149977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB3._PRT]
[ 0.149977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB4._PRT]
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:02.0
(XEN) PCI add device 00:02.1
(XEN) PCI add device 00:02.2
(XEN) PCI add device 00:03.0
(XEN) PCI add device 00:03.1
(XEN) PCI add device 00:03.2
(XEN) PCI add device 00:04.0
(XEN) PCI add device 00:06.0
(XEN) PCI add device 00:07.0
(XEN) PCI add device 00:08.0
(XEN) PCI add device 00:09.0
(XEN) PCI add device 00:0a.0
(XEN) PCI add device 00:18.0
(XEN) PCI add device 00:18.1
(XEN) PCI add device 00:18.2
(XEN) PCI add device 00:18.3
(XEN) PCI add device 00:18.4
(XEN) PCI add device 00:19.0
(XEN) PCI add device 00:19.1
(XEN) PCI add device 00:19.2
(XEN) PCI add device 00:19.3
(XEN) PCI add device 00:19.4
(XEN) PCI add device 01:0d.0
(XEN) PCI add device 01:0e.0
(XEN) PCI add device 01:0e.1
(XEN) PCI add device 06:00.0
(XEN) PCI add device 07:00.0
(XEN) PCI add device 08:04.0
(XEN) PCI add device 08:04.1
[ 0.179195] ACPI: PCI Interrupt Link [LNKU] (IRQs *10 11)
[ 0.180036] ACPI: PCI Interrupt Link [LNKW] (IRQs 10 11) *0, disabled.
[ 0.181092] ACPI: PCI Interrupt Link [LNKS] (IRQs 5 *7 11)
[ 0.182034] ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.183034] ACPI: PCI Interrupt Link [LN01] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.184032] ACPI: PCI Interrupt Link [LN02] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.185033] ACPI: PCI Interrupt Link [LN03] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.186032] ACPI: PCI Interrupt Link [LN04] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.187062] ACPI: PCI Interrupt Link [LN05] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.188033] ACPI: PCI Interrupt Link [LN06] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.189033] ACPI: PCI Interrupt Link [LN07] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.190032] ACPI: PCI Interrupt Link [LN08] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.191032] ACPI: PCI Interrupt Link [LN09] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.192032] ACPI: PCI Interrupt Link [LN0A] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.193023] ACPI: PCI Interrupt Link [LN0B] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.194044] ACPI: PCI Interrupt Link [LN0C] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.195031] ACPI: PCI Interrupt Link [LN0D] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.196035] ACPI: PCI Interrupt Link [LN0E] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.197024] ACPI: PCI Interrupt Link [LN0F] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.198116] ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 7 *11 12 14 15)
[ 0.199032] ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.200032] ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.201096] ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 *5 7 11 12 14 15)
[ 0.202091] ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 5 7 *11 12 14 15)
[ 0.203032] ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.204031] ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.205033] ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.206031] ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.207031] ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.208030] ACPI: PCI Interrupt Link [LN1A] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.209093] ACPI: PCI Interrupt Link [LN1B] (IRQs 3 4 *5 7 11 12 14 15)
[ 0.210032] ACPI: PCI Interrupt Link [LN1C] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.211030] ACPI: PCI Interrupt Link [LN1D] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.212031] ACPI: PCI Interrupt Link [LN1E] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.213021] ACPI: PCI Interrupt Link [LN1F] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.214008] sync cpu 0 get result 1 max_id 7
[ 0.215049] sync cpu 1 get result 1 max_id 7
[ 0.216043] sync cpu 2 get result 1 max_id 7
[ 0.217042] sync cpu 3 get result 1 max_id 7
[ 0.218042] sync cpu 4 get result 1 max_id 7
[ 0.219042] sync cpu 5 get result 1 max_id 7
[ 0.220042] sync cpu 6 get result 1 max_id 7
[ 0.221041] sync cpu 7 get result 1 max_id 7
[ 0.221991] alloc irq_desc for 2262 on node 0
[ 0.222966] alloc kstat_irqs on node 0
[ 0.223005] xen_balloon: Initialising balloon driver with page order 0.
[ 0.224021] vgaarb: device added: PCI:0000:00:04.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.224965] vgaarb: loaded
[ 0.225180] SCSI subsystem initialized
[ 0.226041] libata version 3.00 loaded.
[ 0.227052] usbcore: registered new interface driver usbfs
[ 0.227986] usbcore: registered new interface driver hub
[ 0.229033] usbcore: registered new device driver usb
[ 0.230035] PCI: Using ACPI for IRQ routing
[ 0.231074] NetLabel: Initializing
[ 0.231964] NetLabel: domain hash size = 128
[ 0.231964] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.231964] NetLabel: unlabeled traffic allowed by default
[ 0.232214] Switching to clocksource xen
[ 0.237190] pnp: PnP ACPI init
[ 0.238006] ACPI: bus type pnp registered
[ 0.247322] xen: registering gsi 8 triggering 1 polarity 0
[ 0.248166] xen_allocate_pirq: returning irq 8 for gsi 8
[ 0.248166] xen: --> irq=8
[ 0.263750] xen: registering gsi 1 triggering 1 polarity 0
[ 0.264251] xen_allocate_pirq: returning irq 1 for gsi 1
[ 0.264251] xen: --> irq=1
[ 0.278364] xen: registering gsi 13 triggering 1 polarity 0
[ 0.279238] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.279238] xen: --> irq=13
[ 0.292971] xen: registering gsi 12 triggering 1 polarity 0
[ 0.293931] xen_allocate_pirq: returning irq 12 for gsi 12
[ 0.293931] xen: --> irq=12
[ 0.308374] xen: registering gsi 4 triggering 1 polarity 0
[ 0.309056] xen_allocate_pirq: returning irq 4 for gsi 4
[ 0.309056] xen: --> irq=4
[ 0.322061] Already setup the GSI :4
[ 0.326415] xen: registering gsi 3 triggering 1 polarity 0
[ 0.327009] xen_allocate_pirq: returning irq 3 for gsi 3
[ 0.327009] xen: --> irq=3
[ 0.340699] xen: registering gsi 6 triggering 1 polarity 0
[ 0.341427] xen_allocate_pirq: returning irq 6 for gsi 6
[ 0.341427] xen: --> irq=6
[ 0.355065] pnp: PnP ACPI: found 16 devices
[ 0.355957] ACPI: ACPI bus type pnp unregistered
[ 0.355957] system 00:00: iomem range 0xfed08000-0xfed08007 has been reserved
[ 0.355957] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.355957] system 00:0b: ioport range 0x40b-0x40b has been reserved
[ 0.355957] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.355957] system 00:0b: ioport range 0x4d6-0x4d6 has been reserved
[ 0.355957] system 00:0b: ioport range 0x500-0x560 has been reserved
[ 0.355957] system 00:0b: ioport range 0x558-0x55b has been reserved
[ 0.355957] system 00:0b: ioport range 0x580-0x58f has been reserved
[ 0.355957] system 00:0b: ioport range 0x590-0x593 has been reserved
[ 0.355957] system 00:0b: ioport range 0x600-0x61f has been reserved
[ 0.355957] system 00:0b: ioport range 0x620-0x623 has been reserved
[ 0.355957] system 00:0b: ioport range 0x700-0x703 has been reserved
[ 0.355957] system 00:0b: ioport range 0xc00-0xc01 has been reserved
[ 0.355957] system 00:0b: ioport range 0xc06-0xc08 has been reserved
[ 0.355957] system 00:0b: ioport range 0xc14-0xc14 has been reserved
[ 0.355957] system 00:0b: ioport range 0xc49-0xc4a has been reserved
[ 0.355957] system 00:0b: ioport range 0xc50-0xc53 has been reserved
[ 0.355957] system 00:0b: ioport range 0xc6c-0xc6c has been reserved
[ 0.355957] system 00:0b: ioport range 0xc6f-0xc6f has been reserved
[ 0.355957] system 00:0b: ioport range 0xcd6-0xcd7 has been reserved
[ 0.355957] system 00:0b: ioport range 0xcf9-0xcf9 could not be reserved
[ 0.355957] system 00:0b: ioport range 0xf50-0xf58 has been reserved
[ 0.507385] pciback 0000:00:01.0: probing...
[ 0.508332] pciback 0000:00:02.0: probing...
[ 0.508332] pciback 0000:00:02.1: probing...
[ 0.508332] pciback 0000:00:02.2: probing...
[ 0.508332] pciback 0000:00:03.0: probing...
[ 0.508332] pciback 0000:00:03.1: probing...
[ 0.508332] pciback 0000:00:03.2: probing...
[ 0.508332] pciback 0000:00:04.0: probing...
[ 0.508332] pciback 0000:00:06.0: probing...
[ 0.508332] pciback 0000:00:07.0: probing...
[ 0.508332] pciback 0000:00:08.0: probing...
[ 0.508332] pciback 0000:00:09.0: probing...
[ 0.508332] pciback 0000:00:0a.0: probing...
[ 0.508332] pciback 0000:00:18.0: probing...
[ 0.508332] pciback 0000:00:18.1: probing...
[ 0.508332] pciback 0000:00:18.2: probing...
[ 0.508332] pciback 0000:00:18.3: probing...
[ 0.508332] pciback 0000:00:18.4: probing...
[ 0.508332] pciback 0000:00:19.0: probing...
[ 0.508332] pciback 0000:00:19.1: probing...
[ 0.508332] pciback 0000:00:19.2: probing...
[ 0.508332] pciback 0000:00:19.3: probing...
[ 0.508332] pciback 0000:00:19.4: probing...
[ 0.508332] pciback 0000:01:0d.0: probing...
[ 0.508332] pciback 0000:01:0e.0: probing...
[ 0.508332] pciback 0000:01:0e.1: probing...
[ 0.508332] pciback 0000:06:00.0: probing...
[ 0.508332] pciback 0000:07:00.0: probing...
[ 0.508332] pciback 0000:08:04.0: probing...
[ 0.508332] pciback 0000:08:04.1: probing...
[ 0.643704] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.644011] pci 0000:01:0d.0: PCI bridge, secondary bus 0000:02
[ 0.644011] pci 0000:01:0d.0: IO window: disabled
[ 0.644011] pci 0000:01:0d.0: MEM window: disabled
[ 0.644011] pci 0000:01:0d.0: PREFETCH window: disabled
[ 0.644011] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.644011] pci 0000:00:01.0: IO window: 0x6000-0x6fff
[ 0.644011] pci 0000:00:01.0: MEM window: 0xd8300000-0xd83fffff
[ 0.644011] pci 0000:00:01.0: PREFETCH window: 0x30000000-0x300fffff
[ 0.644011] pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
[ 0.644011] pci 0000:00:06.0: IO window: disabled
[ 0.644011] pci 0000:00:06.0: MEM window: disabled
[ 0.644011] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.644011] pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
[ 0.644011] pci 0000:00:07.0: IO window: disabled
[ 0.644011] pci 0000:00:07.0: MEM window: disabled
[ 0.644011] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.644011] pci 0000:00:08.0: PCI bridge, secondary bus 0000:05
[ 0.644011] pci 0000:00:08.0: IO window: disabled
[ 0.644011] pci 0000:00:08.0: MEM window: disabled
[ 0.644011] pci 0000:00:08.0: PREFETCH window: disabled
[ 0.644011] pci 0000:00:09.0: PCI bridge, secondary bus 0000:06
[ 0.644011] pci 0000:00:09.0: IO window: 0x7000-0x7fff
[ 0.644011] pci 0000:00:09.0: MEM window: 0xd8200000-0xd82fffff
[ 0.644011] pci 0000:00:09.0: PREFETCH window: 0x30100000-0x301fffff
[ 0.644011] pci 0000:07:00.0: PCI bridge, secondary bus 0000:08
[ 0.644011] pci 0000:07:00.0: IO window: disabled
[ 0.644011] pci 0000:07:00.0: MEM window: 0xd8400000-0xd84fffff
[ 0.644011] pci 0000:07:00.0: PREFETCH window: disabled
[ 0.644011] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:07
[ 0.644011] pci 0000:00:0a.0: IO window: disabled
[ 0.644011] pci 0000:00:0a.0: MEM window: 0xd8400000-0xd84fffff
[ 0.644011] pci 0000:00:0a.0: PREFETCH window: disabled
[ 0.644011] xen: registering gsi 32 triggering 0 polarity 1
[ 0.644011] alloc irq_desc for 32 on node 0
[ 0.644011] alloc kstat_irqs on node 0
[ 0.843494] xen: --> irq=32
[ 0.846386] pci 0000:00:06.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 0.847351] pci 0000:00:06.0: setting latency timer to 64
[ 0.847351] xen: registering gsi 32 triggering 0 polarity 1
[ 0.847351] xen_allocate_pirq: returning irq 32 for gsi 32
[ 0.847351] xen: --> irq=32
[ 0.872664] Already setup the GSI :32
[ 0.873643] pci 0000:00:07.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 0.873643] pci 0000:00:07.0: setting latency timer to 64
[ 0.873643] xen: registering gsi 32 triggering 0 polarity 1
[ 0.873643] xen_allocate_pirq: returning irq 32 for gsi 32
[ 0.873643] xen: --> irq=32
[ 0.902683] Already setup the GSI :32
[ 0.903645] pci 0000:00:08.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 0.903645] pci 0000:00:08.0: setting latency timer to 64
[ 0.903645] xen: registering gsi 32 triggering 0 polarity 1
[ 0.903645] xen_allocate_pirq: returning irq 32 for gsi 32
[ 0.903645] xen: --> irq=32
[ 0.932686] Already setup the GSI :32
[ 0.933666] pci 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 0.933666] pci 0000:00:09.0: setting latency timer to 64
[ 0.933666] xen: registering gsi 32 triggering 0 polarity 1
[ 0.933666] xen_allocate_pirq: returning irq 32 for gsi 32
[ 0.933666] xen: --> irq=32
[ 0.962698] Already setup the GSI :32
[ 0.963678] pci 0000:00:0a.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 0.963678] pci 0000:00:0a.0: setting latency timer to 64
[ 0.963678] pci 0000:07:00.0: setting latency timer to 64
[ 0.963678] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.963678] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.963678] pci_bus 0000:01: resource 0 io: [0x6000-0x6fff]
[ 0.963678] pci_bus 0000:01: resource 1 mem: [0xd8300000-0xd83fffff]
[ 0.963678] pci_bus 0000:01: resource 2 pref mem [0x30000000-0x300fffff]
[ 0.963678] pci_bus 0000:06: resource 0 io: [0x7000-0x7fff]
[ 0.963678] pci_bus 0000:06: resource 1 mem: [0xd8200000-0xd82fffff]
[ 0.963678] pci_bus 0000:06: resource 2 pref mem [0x30100000-0x301fffff]
[ 0.963678] pci_bus 0000:07: resource 1 mem: [0xd8400000-0xd84fffff]
[ 0.963678] pci_bus 0000:08: resource 1 mem: [0xd8400000-0xd84fffff]
[ 0.963678] NET: Registered protocol family 2
[ 0.963678] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.059645] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.067886] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.068414] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.068414] TCP reno registered
[ 1.085095] NET: Registered protocol family 1
[ 1.090327] RPC: Registered udp transport module.
[ 1.091201] RPC: Registered tcp transport module.
[ 1.091201] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.106604] pci 0000:00:02.0: disabled boot interrupts on device [1166:0205]
[ 1.114212] pci 0000:00:04.0: Boot video device
[ 1.115038] Trying to unpack rootfs image as initramfs...
[ 1.133029] Freeing initrd memory: 3163k freed
[ 1.139213] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.140016] DMA: Placing 64MB software IO TLB between c253d000 - c653d000
[ 1.140016] DMA: software IO TLB at phys 0x253d000 - 0x653d000
[ 1.158755] kvm: no hardware support
[ 1.162526] has_svm: svm not available
[ 1.164416] kvm: no hardware support
[ 1.180212] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.181198] Scanning for low memory corruption every 60 seconds
[ 1.195149] audit: initializing netlink socket (disabled)
[ 1.200700] type=2000 audit(1281548292.144:1): initialized
[ 1.216783] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.231029] VFS: Disk quotas dquot_6.5.2
[ 1.235318] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.244670] msgmni has been set to 1369
[ 1.248918] SELinux: Registering netfilter hooks
[ 1.255805] alg: No test for stdrng (krng)
[ 1.260386] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.261368] io scheduler noop registered
[ 1.261368] io scheduler anticipatory registered
[ 1.261368] io scheduler deadline registered
[ 1.281116] io scheduler cfq registered (default)
[ 1.286407] alloc irq_desc for 2261 on node 0
[ 1.287185] alloc kstat_irqs on node 0
[ 1.295028] pcieport 0000:00:06.0: setting latency timer to 64
[ 1.301406] alloc irq_desc for 2260 on node 0
[ 1.302163] alloc kstat_irqs on node 0
[ 1.310021] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.316431] alloc irq_desc for 2259 on node 0
[ 1.317198] alloc kstat_irqs on node 0
[ 1.325048] pcieport 0000:00:08.0: setting latency timer to 64
[ 1.331405] alloc irq_desc for 2258 on node 0
[ 1.332172] alloc kstat_irqs on node 0
[ 1.340022] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.346382] alloc irq_desc for 2257 on node 0
[ 1.347149] alloc kstat_irqs on node 0
[ 1.354997] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.361469] aer 0000:00:06.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.362430] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.362430] aer 0000:00:08.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.362430] aer 0000:00:09.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.362430] aer 0000:00:0a.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.401474] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.407979] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input0
[ 1.408965] ACPI: Power Button [PWRB]
[ 1.421346] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.422332] ACPI: Power Button [PWRF]
[ 1.432795] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input2
[ 1.433781] ACPI: Sleep Button [SLPF]
[ 1.452346] Event-channel device installed.
[ 1.456742] pciback: pcistub_init_devices_late
[ 1.469914] blktap_device_init: blktap device major 253
[ 1.470021] blktap_ring_init: blktap ring major: 251
[ 1.491699] registering netback
[ 1.504209] alloc irq_desc for 2256 on node 0
[ 1.505169] alloc kstat_irqs on node 0
[ 1.514285] hpet_acpi_add: no address or irqs in _CRS
[ 1.519692] Non-volatile memory driver v1.3
[ 1.520669] Linux agpgart interface v0.103
[ 1.529077] [drm] Initialized drm 1.1.0 20060810
[ 1.530027] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.784180] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.791459] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.802130] brd: module loaded
[ 1.807623] loop: module loaded
[ 1.811152] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.821102] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 1.822086] Copyright (c) 1999-2006 Intel Corporation.
[ 1.832953] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 1.833932] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.845077] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.846062] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.856948] tg3.c:v3.102 (September 1, 2009)
[ 1.857887] xen: registering gsi 36 triggering 0 polarity 1
[ 1.857887] alloc irq_desc for 36 on node 0
[ 1.857887] alloc kstat_irqs on node 0
[ 1.875322] xen: --> irq=36
[ 1.878189] tg3 0000:08:04.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[ 1.892855] eth0: Tigon3 [partno(BCM95715) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:e0:81:80:1d:a0
[ 1.893606] eth0: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.893606] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.893606] eth0: dma_rwctrl[76148000] dma_mask[64-bit]
[ 1.893606] xen: registering gsi 36 triggering 0 polarity 1
[ 1.893606] xen_allocate_pirq: returning irq 36 for gsi 36
[ 1.893606] xen: --> irq=36
[ 1.935694] Already setup the GSI :36
[ 1.936675] tg3 0000:08:04.1: PCI INT B -> GSI 36 (level, low) -> IRQ 36
[ 1.956280] eth1: Tigon3 [partno(BCM95715) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:e0:81:80:1d:a1
[ 1.957043] eth1: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.957043] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.957043] eth1: dma_rwctrl[76148000] dma_mask[64-bit]
[ 1.985325] sky2 driver version 1.25
[ 1.989357] tun: Universal TUN/TAP device driver, 1.6
[ 1.990343] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.000991] console [netcon0] enabled
[ 2.001969] netconsole: network logging started
[ 2.001969] Fusion MPT base driver 3.04.12
[ 2.001969] Copyright (c) 1999-2008 LSI Corporation
[ 2.001969] Fusion MPT SPI Host driver 3.04.12
[ 2.023073] Fusion MPT FC Host driver 3.04.12
[ 2.027634] Fusion MPT SAS Host driver 3.04.12
[ 2.028616] xen: registering gsi 35 triggering 0 polarity 1
[ 2.028616] alloc irq_desc for 35 on node 0
[ 2.028616] alloc kstat_irqs on node 0
[ 2.046218] xen: --> irq=35
[ 2.049095] mptsas 0000:06:00.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35
[ 2.056303] mptbase: ioc0: Initiating bringup
[ 2.340030] ioc0: LSISAS1064E B1: Capabilities={Initiator}
[ 2.341006] mptsas 0000:06:00.0: setting latency timer to 64
[ 7.394886] scsi0 : ioc0: LSISAS1064E B1, FwRev=010a0000h, Ports=1, MaxQ=511, IRQ=35
[ 7.425059] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.426043] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[ 7.438062] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
[ 7.439004] xen: registering gsi 10 triggering 0 polarity 1
[ 7.439004] xen_allocate_pirq: returning irq 10 for gsi 10
[ 7.439004] xen: --> irq=10
[ 7.457919] ehci_hcd 0000:00:03.2: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
[ 7.458893] ehci_hcd 0000:00:03.2: EHCI Host Controller
[ 7.458893] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file 'devices'
[ 7.458893] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 7.490379] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
[ 7.491362] ehci_hcd 0000:00:03.2: reset hcs_params 0x2214 dbg=0 cc=2 pcc=2 ordered ports=4
[ 7.491362] ehci_hcd 0000:00:03.2: reset hcc_params a010 thresh 1 uframes 1024
[ 7.491362] ehci_hcd 0000:00:03.2: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
[ 7.491362] ehci_hcd 0000:00:03.2: ...powerup ports...
[ 7.549052] ehci_hcd 0000:00:03.2: MWI active
[ 7.550019] ehci_hcd 0000:00:03.2: supports USB remote wakeup
[ 7.550019] ehci_hcd 0000:00:03.2: irq 10, io mem 0xd8512000
[ 7.550019] ehci_hcd 0000:00:03.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 7.550019] ehci_hcd 0000:00:03.2: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 7.582205] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
[ 7.588092] usb usb1: default language 0x0409
[ 7.592532] usb usb1: udev 1, busnum 1, minor = 0
[ 7.593497] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.593497] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.593497] usb usb1: Product: EHCI Host Controller
[ 7.593497] usb usb1: Manufacturer: Linux 2.6.32.17 ehci_hcd
[ 7.593497] usb usb1: SerialNumber: 0000:00:03.2
[ 7.627041] usb usb1: usb_probe_device
[ 7.628012] usb usb1: configuration #1 chosen from 1 choice
[ 7.636512] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 7.642459] hub 1-0:1.0: usb_probe_interface
[ 7.643436] hub 1-0:1.0: usb_probe_interface - got id
[ 7.643436] hub 1-0:1.0: USB hub found
[ 7.655768] hub 1-0:1.0: 4 ports detected
[ 7.656745] hub 1-0:1.0: standalone hub
[ 7.656745] hub 1-0:1.0: individual port power switching
[ 7.656745] hub 1-0:1.0: individual port over-current protection
[ 7.656745] hub 1-0:1.0: power on to power good time: 20ms
[ 7.680760] hub 1-0:1.0: local power source is good
[ 7.681722] hub 1-0:1.0: enabling power on all ports
[ 7.690817] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 7.700256] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.701241] ohci_hcd: block sizes: ed 64 td 64
[ 7.701241] xen: registering gsi 10 triggering 0 polarity 1
[ 7.701241] xen_allocate_pirq: returning irq 10 for gsi 10
[ 7.701241] xen: --> irq=10
[ 7.725128] Already setup the GSI :10
[ 7.727147] ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
[ 7.737396] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 7.742798] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002'
[ 7.752287] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 7.759912] ohci_hcd 0000:00:03.0: created debug files
[ 7.760794] ohci_hcd 0000:00:03.0: supports USB remote wakeup
[ 7.760794] ohci_hcd 0000:00:03.0: irq 10, io mem 0xd8510000
[ 7.790120] ehci_hcd 0000:00:03.2: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT
[ 7.798367] hub 1-0:1.0: port 2: status 0501 change 0001
[ 7.810082] ohci_hcd 0000:00:03.0: OHCI controller state
[ 7.811033] ohci_hcd 0000:00:03.0: OHCI 1.0, NO legacy support registers
[ 7.811033] ohci_hcd 0000:00:03.0: control 0x283 RWC HCFS=operational CBSR=3
[ 7.811033] ohci_hcd 0000:00:03.0: cmdstatus 0x00000 SOC=0
[ 7.811033] ohci_hcd 0000:00:03.0: intrstatus 0x00000004 SF
[ 7.811033] ohci_hcd 0000:00:03.0: intrenable 0x8000001a MIE UE RD WDH
[ 7.811033] ohci_hcd 0000:00:03.0: hcca frame #0026
[ 7.811033] ohci_hcd 0000:00:03.0: roothub.a 00000202 POTPGT=0 NPS NDP=2(2)
[ 7.811033] ohci_hcd 0000:00:03.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 7.811033] ohci_hcd 0000:00:03.0: roothub.status 00008000 DRWE
[ 7.811033] ohci_hcd 0000:00:03.0: roothub.portstatus [0] 0x00000100 PPS
[ 7.811033] ohci_hcd 0000:00:03.0: roothub.portstatus [1] 0x00000100 PPS
[ 7.885326] usb usb2: default language 0x0409
[ 7.889764] usb usb2: udev 1, busnum 2, minor = 128
[ 7.890729] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.890729] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.890729] usb usb2: Product: OHCI Host Controller
[ 7.890729] usb usb2: Manufacturer: Linux 2.6.32.17 ohci_hcd
[ 7.890729] usb usb2: SerialNumber: 0000:00:03.0
[ 7.924326] hub 1-0:1.0: state 7 ports 4 chg 0004 evt 0000
[ 7.924537] usb usb2: usb_probe_device
[ 7.924542] usb usb2: configuration #1 chosen from 1 choice
[ 7.924554] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 7.924681] hub 2-0:1.0: usb_probe_interface
[ 7.924685] hub 2-0:1.0: usb_probe_interface - got id
[ 7.924688] hub 2-0:1.0: USB hub found
[ 7.925673] hub 2-0:1.0: 2 ports detected
[ 7.925676] hub 2-0:1.0: standalone hub
[ 7.925678] hub 2-0:1.0: no power switching (usb 1.0)
[ 7.925681] hub 2-0:1.0: global over-current protection
[ 7.925683] hub 2-0:1.0: power on to power good time: 0ms
[ 7.925696] hub 2-0:1.0: local power source is good
[ 7.925699] hub 2-0:1.0: no over-current condition exists
[ 7.925703] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 7.925729] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 7.925837] xen: registering gsi 10 triggering 0 polarity 1
[ 7.925841] xen_allocate_pirq: returning irq 10 for gsi 10
[ 7.925844] xen: --> irq=10
[ 7.925848] Already setup the GSI :10
[ 7.925853] ohci_hcd 0000:00:03.1: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
[ 7.925893] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 7.925901] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003'
[ 7.926116] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 7.927056] ohci_hcd 0000:00:03.1: created debug files
[ 7.927058] ohci_hcd 0000:00:03.1: supports USB remote wakeup
[ 7.927069] ohci_hcd 0000:00:03.1: irq 10, io mem 0xd8511000
[ 7.977092] ohci_hcd 0000:00:03.1: OHCI controller state
[ 7.977098] ohci_hcd 0000:00:03.1: OHCI 1.0, NO legacy support registers
[ 7.977108] ohci_hcd 0000:00:03.1: control 0x283 RWC HCFS=operational CBSR=3
[ 7.977113] ohci_hcd 0000:00:03.1: cmdstatus 0x00000 SOC=0
[ 7.977119] ohci_hcd 0000:00:03.1: intrstatus 0x00000000
[ 7.977127] ohci_hcd 0000:00:03.1: intrenable 0x8000001a MIE UE RD WDH
[ 7.977146] ohci_hcd 0000:00:03.1: hcca frame #0000
[ 7.977153] ohci_hcd 0000:00:03.1: roothub.a 00000202 POTPGT=0 NPS NDP=2(2)
[ 7.977159] ohci_hcd 0000:00:03.1: roothub.b 00000000 PPCM=0000 DR=0000
[ 7.977167] ohci_hcd 0000:00:03.1: roothub.status 00008000 DRWE
[ 7.977173] ohci_hcd 0000:00:03.1: roothub.portstatus [0] 0x00000100 PPS
[ 7.977179] ohci_hcd 0000:00:03.1: roothub.portstatus [1] 0x00000100 PPS
[ 7.977198] usb usb3: default language 0x0409
[ 7.977212] usb usb3: udev 1, busnum 3, minor = 256
[ 7.977218] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.977222] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.977225] usb usb3: Product: OHCI Host Controller
[ 7.977227] usb usb3: Manufacturer: Linux 2.6.32.17 ohci_hcd
[ 7.977230] usb usb3: SerialNumber: 0000:00:03.1
[ 7.977398] usb usb3: usb_probe_device
[ 7.977402] usb usb3: configuration #1 chosen from 1 choice
[ 7.977411] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 7.977539] hub 3-0:1.0: usb_probe_interface
[ 7.977542] hub 3-0:1.0: usb_probe_interface - got id
[ 7.977545] hub 3-0:1.0: USB hub found
[ 7.978135] hub 3-0:1.0: 2 ports detected
[ 7.978138] hub 3-0:1.0: standalone hub
[ 7.978140] hub 3-0:1.0: no power switching (usb 1.0)
[ 7.978143] hub 3-0:1.0: global over-current protection
[ 7.978146] hub 3-0:1.0: power on to power good time: 0ms
[ 7.978156] hub 3-0:1.0: local power source is good
[ 7.978159] hub 3-0:1.0: no over-current condition exists
[ 7.978162] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 7.978185] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 7.978408] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.978696] usbcore: registered new interface driver usblp
[ 7.978701] Initializing USB Mass Storage driver...
[ 7.978816] usbcore: registered new interface driver usb-storage
[ 7.978820] USB Mass Storage support registered.
[ 7.978943] usbcore: registered new interface driver libusual
[ 7.979189] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 7.982141] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.982141] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 7.982869] mice: PS/2 mouse device common for all mice
[ 7.983831] rtc_cmos 00:06: RTC can wake from S4
[ 7.983989] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 7.984058] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 7.984829] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 7.985547] cpuidle: using governor ladder
[ 7.985551] cpuidle: using governor menu
[ 7.988533] usbcore: registered new interface driver hiddev
[ 7.988640] usbcore: registered new interface driver usbhid
[ 7.988645] usbhid: v2.6:USB HID core driver
[ 7.988999] Advanced Linux Sound Architecture Driver Version 1.0.21.
modprobe: FATAL: Could not load /lib/modules/2.6.32.17/modules.dep: No such file or directory[ 8.377831] h
ub 1-0:1.0: port\r 2, status 0501,
change 0000, 480 Mb/s
[ 8.392891] ehci_hcd 0000:00:03.2: port 2 low speed --> companion
[ 8.393598] ALSA device list:
[ 8.393601] No soundcards found.
[ 8.393713] Netfilter messages via NETLINK v0.30.
[ 8.393748] nf_conntrack version 0.5.0 (12072 buckets, 48288 max)
[ 8.394294] ctnetlink v0.93: registering with nfnetlink.
[ 8.395063] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.395123] TCP cubic registered
[ 8.395126] Initializing XFRM netlink socket
[ 8.395821] NET: Registered protocol family 10
[ 8.397574] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.397671] IPv6 over IPv4 tunneling driver
[ 8.398686] NET: Registered protocol family 17
[ 8.398859] Using IPI No-Shortcut mode
[ 8.399240] PM: Resume from disk failed.
[ 8.399265] registered taskstats version 1
[ 8.400217] Magic number: 6:223:643
[ 8.400614] Freeing unused kernel memory: 460k freed
[ 8.474351] Write protecting the kernel text: 4912k
[ 8.480854] Write protecting the kernel read-only data: 2364k
Loading, please wait...
[ 8.526190] ehci_hcd 0000:00:03.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
[ 8.534468] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 8.540037] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
[ 8.549009] hub 2-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[ 8.659099] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[ 8.773043] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 8.833059] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 8.950093] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 9.032165] usb 2-2: skipped 1 descriptor after interface
[ 9.033060] usb 2-2: skipped 1 descriptor after interface
[ 9.044153] usb 2-2: default language 0x0409
[ 9.053160] usb 2-2: udev 2, busnum 2, minor = 129
[ 9.054059] usb 2-2: New USB device found, idVendor=0624, idProduct=0294
[ 9.054059] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.054059] usb 2-2: Product: Dell 03R874
[ 9.054059] usb 2-2: Manufacturer: Avocent
[ 9.080514] usb 2-2: usb_probe_device
[ 9.084309] usb 2-2: configuration #1 chosen from 1 choice
[ 9.094191] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
[ 9.102367] usbhid 2-2:1.0: usb_probe_interface
[ 9.103180] usbhid 2-2:1.0: usb_probe_interface - got id
[ 9.117995] input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input4
[ 9.127948] generic-usb 0003:0624:0294.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent Dell 03R874] on usb-0000:00:03.0-2/input0
[ 9.140143] usb 2-2: adding 2-2:1.1 (config #1, interface 1)
[ 9.148314] usbhid 2-2:1.1: usb_probe_interface
[ 9.149176] usbhid 2-2:1.1: usb_probe_interface - got id
[ 9.165943] input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.1/input/input5
[ 9.175928] generic-usb 0003:0624:0294.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent Dell 03R874] on usb-0000:00:03.0-2/input1
[ 9.187868] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002'
[ 9.197217] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 9.202869] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0004
[ 9.205112] ohci_hcd 0000:00:03.1: auto-stop root hub
[ 9.213644] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 9.734641] sata_svw 0000:01:0e.0: version 2.3
[ 9.739559] ACPI: PCI Interrupt Link [LNKS] enabled at IRQ 11
[ 9.740280] xen: registering gsi 11 triggering 0 polarity 1
[ 9.745497] scsi1 : pata_serverworks
[ 9.745914] scsi2 : pata_serverworks
[ 9.746614] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0x4800 irq 14
[ 9.746618] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0x4808 irq 15
[ 9.740280] xen_allocate_pirq: returning irq 11 for gsi 11
[ 9.740280] xen: --> irq=11
[ 9.780568] sata_svw 0000:01:0e.0: PCI INT A -> Link[LNKS] -> GSI 11 (level, low) -> IRQ 11
[ 9.789434] scsi3 : sata_svw
[ 9.792934] scsi4 : sata_svw
[ 9.796298] scsi5 : sata_svw
[ 9.799501] scsi6 : sata_svw
[ 9.800477] ata3: SATA max UDMA/133 mmio m8192@0xd8300000 port 0xd8300000 irq 11
[ 9.800477] ata4: SATA max UDMA/133 mmio m8192@0xd8300000 port 0xd8300100 irq 11
[ 9.800477] ata5: SATA max UDMA/133 mmio m8192@0xd8300000 port 0xd8300200 irq 11
[ 9.800477] ata6: SATA max UDMA/133 mmio m8192@0xd8300000 port 0xd8300300 irq 11
[ 9.832310] xen: registering gsi 11 triggering 0 polarity 1
[ 9.832310] xen_allocate_pirq: returning irq 11 for gsi 11
[ 9.832310] xen: --> irq=11
[ 9.846539] Already setup the GSI :11
[ 9.847500] sata_svw 0000:01:0e.1: PCI INT A -> Link[LNKS] -> GSI 11 (level, low) -> IRQ 11
[ 9.902550] ata1.01: ATAPI: DV-28E-R, 1.8A, max UDMA/33
[ 9.931537] ata1.01: configured for UDMA/33
[ 9.940802] scsi 1:0:1:0: CD-ROM TEAC DV-28E-R 1.8A PQ: 0 ANSI: 5
[ 9.959005] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 9.965362] Uniform CD-ROM driver Revision: 3.20
[ 9.970576] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 9.975586] sr 1:0:1:0: Attached scsi generic sg0 type 5
[ 10.138152] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 10.191658] ata3.00: ATA-7: ST3160815AS, 3.AAC, max UDMA/133
[ 10.192563] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 10.258231] ata3.00: configured for UDMA/133
[ 10.262886] scsi 3:0:0:0: Direct-Access ATA ST3160815AS 3.AA PQ: 0 ANSI: 5
[ 10.271699] sd 3:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 10.271735] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 10.284845] sd 3:0:0:0: [sda] Write Protect is off
[ 10.285655] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 10.294922] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.304446] sda:
[ 10.324076] sd 3:0:0:0: [sda] Attached SCSI disk
[ 10.577143] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 10.588033] ata4.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[ 10.589011] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 10.607186] ata4.00: configured for UDMA/133
[ 10.611845] scsi 4:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5
[ 10.621083] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 10.621163] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 10.621266] sd 4:0:0:0: [sdb] Write Protect is off
[ 10.621270] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 10.621319] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.621642] sdb: sdb1 sdb2
[ 10.656643] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 10.962017] ata5: SATA link down (SStatus 4 SControl 300)
[ 11.283017] ata6: SATA link down (SStatus 4 SControl 300)
[ 11.312440] Uniform Multi-Platform E-IDE driver
[ 11.698218] hub 3-0:1.0: hub_suspend
[ 11.701933] usb usb3: bus auto-suspend
[ 11.705846] ohci_hcd 0000:00:03.1: suspend root hub
[ 11.710894] hub 1-0:1.0: hub_suspend
[ 11.714719] usb usb1: bus auto-suspend
[ 11.718649] ehci_hcd 0000:00:03.2: suspend root hub
[ 11.767744] PM: Starting manual resume from disk
[ 11.768413] PM: Resume from partition 8:18
[ 11.768413] PM: Checking hibernation image.
[ 11.781259] PM: Error -22 checking image file
[ 11.782153] PM: Resume from disk failed.
[ 11.821896] kjournald starting. Commit interval 5 seconds
[ 11.821915] EXT3-fs: mounted filesystem with writeback data mode.
SELinux: Could not open policy file <= /etc/selinux/targeted/policy/policy.24: No such file or directory
\rINIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd[ 12.821635] udevd version 125 started
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 13.829483] piix4_smbus 0000:00:02.0: SMBus Host Controller at 0x580, revision 0
done.
Setting the system clock.
Activating swap...[ 15.507379] Adding 3903784k swap on /dev/sdb2. Priority:-1 extents:1 across:3903784k
done.
Checking root file system...fsck 1.41.3 (12-Oct-2008)
/dev/sdb1: clean, 89248/488640 files, 598379/1953897 blocks (check in 3 mounts)
done.
[ 15.854311] EXT3 FS on sdb1, internal journal
Setting the system clock.
Cleaning up ifupdown....
Loading kernel modules...done.
Checking file systems...fsck 1.41.3 (12-Oct-2008)
done.
Setting kernel variables (/etc/sysctl.conf)...done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...done.
Starting portmap daemon....
Starting NFS common utilities: statd.
Setting console screen modes and fonts.
^[]Rcannot (un)set powersave mode
^[[9;30]^[[14;30][ 18.340446] alloc irq_desc for 2255 on node 0
[ 18.341269] alloc kstat_irqs on node 0
[ 18.387575] ADDRCONF(NETDEV_UP): eth0: link is not ready
\rINIT: Entering runlevel: 2
Starting enhanced syslogd: rsyslogd.
Starting ACPI services....
Starting OpenBSD Secure Shell server: sshd.
Starting MTA: exim4.
Starting NFS common utilities: statd.
Not starting internet superserver: no services enabled.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: crond.
[ 21.112723] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[ 21.112998] tg3: eth0: Flow control is on for TX and on for RX.
[ 21.112998] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Debian GNU/Linux 5.0 exile /dev/hvc0
exile login: [ 31.705024] eth0: no IPv6 routers present
\rINIT: Switching to runlevel: 6
\rINIT: Sending processes the TERM signal
Stopping deferred execution scheduler: atd.
Stopping MTA: exim4_listener.
Stopping NFS common utilities: statd.
Stopping internet superserver: inetd.
Stopping rsync daemon: rsync.
Saving the system clock.
Stopping enhanced syslogd: rsyslogd.
Asking all remaining processes to terminate...acpid: exiting
done.
All processes ended within 2 seconds....done.
Stopping portmap daemon....
Deconfiguring network interfaces...There is already a pid file /var/run/dhclient.eth0.pid with pid 3721
removed stale PID file
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Listening on LPF/eth0/00:e0:81:80:1d:a0
Sending on LPF/eth0/00:e0:81:80:1d:a0
Sending on Socket/fallback
DHCPRELEASE on eth0 to 10.80.16.125 port 67
[ 60.667272] tg3 0000:08:04.0: PME# enabled
done.
Cleaning up ifupdown....
Deactivating swap...done.
Unmounting local filesystems...done.
Will now restart.
[ 62.908507] md: stopping all md devices.
[ 63.914741] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[ 63.920250] sd 3:0:0:0: [sda] Synchronizing SCSI cache
[ 63.926502] Restarting system.
(XEN) Domain 0 shutdown: rebooting machine.
[-- Attachment #3: exile.009.log --]
[-- Type: text/x-log, Size: 75142 bytes --]
__ __ _ _ _ _ _ _
\ \/ /___ _ __ | || | / | _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ | || |_ | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | |__ _|| |__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |_|(_)_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 4.1-unstable (gdunlap@uk.xensource.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) Wed Aug 11 13:18:32 EDT 2010
(XEN) Latest ChangeSet: unavailable
(XEN) Console output is synchronous.
(XEN) Bootloader: COM32 Multiboot loader v0.2
(XEN) Command line: com1=115200,8n1 console=com1,tty sync_console console_to_ring dom0_mem=768M loglvl=all
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 2 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009c400 (usable)
(XEN) 000000000009c400 - 00000000000a0000 (reserved)
(XEN) 00000000000ce000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cfee0000 (usable)
(XEN) 00000000cfee0000 - 00000000cfee5000 (ACPI data)
(XEN) 00000000cfee5000 - 00000000cfef1000 (ACPI NVS)
(XEN) 00000000cfef1000 - 00000000d0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec03000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000fff80000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000130000000 (usable)
(XEN) ACPI: RSDP 000F8080, 0024 (r2 PTLTD )
(XEN) ACPI: XSDT CFEE01FE, 005C (r1 BRCM EXPLOSN 6040000 PTL 2000001)
(XEN) ACPI: FACP CFEE02CE, 00F4 (r3 BRCM EXPLOSN 6040000 MSFT 2000001)
(XEN) ACPI Warning (tbfadt-0444): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/C [20070126]
(XEN) ACPI: DSDT CFEE03C2, 4949 (r2 BRCM EXPLOSN 6040000 MSFT 3000000)
(XEN) ACPI: FACS CFEF0FC0, 0040
(XEN) ACPI: TCPA CFEE4D0B, 0032 (r1 BRCM EXPLOSN 6040000 PTL 20000001)
(XEN) ACPI: SRAT CFEE4D3D, 0128 (r1 AMD FAM_F_10 6040000 AMD 1)
(XEN) ACPI: HPET CFEE4E65, 0038 (r1 BRCM EXPLOSN 6040000 BRCM 2000001)
(XEN) ACPI: SSDT CFEE4E9D, 0049 (r1 BRCM PRT0 6040000 BRCM 2000001)
(XEN) ACPI: SPCR CFEE4EE6, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
(XEN) ACPI: APIC CFEE4F36, 00CA (r1 BRCM EXPLOSN 6040000 PTL 2000001)
(XEN) System RAM: 4094MB (4192752kB)
(XEN) SRAT: PXM 0 -> APIC 0 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 1 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 2 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 3 -> Node 0
(XEN) SRAT: PXM 1 -> APIC 4 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 5 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 6 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 7 -> Node 1
(XEN) SRAT: Node 0 PXM 0 0-a0000
(XEN) SRAT: Node 0 PXM 0 100000-d0000000
(XEN) SRAT: Node 0 PXM 0 100000000-130000000
(XEN) NUMA: Allocated memnodemap from 12fdfd000 - 12fdff000
(XEN) NUMA: Using 8 for the hash shift.
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f80b0
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x508
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[544,504], pm1x_evt[500,540]
(XEN) ACPI: wakeup_vec[cfef0fcc], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
(XEN) Processor #3 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
(XEN) Processor #4 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
(XEN) Processor #5 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
(XEN) Processor #6 0:4 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
(XEN) Processor #7 0:4 APIC version 16
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15
(XEN) ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16])
(XEN) IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31
(XEN) ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32])
(XEN) IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) Enabling APIC mode: Flat. Using 3 I/O APICs
(XEN) ACPI: HPET id: 0x1166a201 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 1995.082 MHz processor.
(XEN) Initing memory sharing.
(XEN) AMD Fam10h machine check reporting enabled
(XEN) AMD-Vi: IOMMU not found!
(XEN) I/O virtualisation disabled
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 14.318MHz HPET
XEN) Allocated console ring of 64 KiB.
(XEN) HVM: ASIDs enabled.
(XEN) HVM: SVM enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Brought up 8 CPUs
(XEN) tmem: initialized comp=0 dedup=0 tze=0 global-lock=0
(XEN) HPET: 3 timers in total, 0 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) MCA: Use hw thresholding to adjust polling frequency
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) Xenoprofile: Failed to setup IBS LVT offset, IBSCTL = 0xffffffff*** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x1000000 -> 0x1a04000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000012a000000->000000012c000000 (188416 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: 00000000c1000000->00000000c1a04000
(XEN) Init. ramdisk: 00000000c1a04000->00000000c1d1ae00
(XEN) Phys-Mach map: 00000000c1d1b000->00000000c1ddb000
(XEN) Start info: 00000000c1ddb000->00000000c1ddb4b4
(XEN) Page tables: 00000000c1ddc000->00000000c1df2000
(XEN) Boot stack: 00000000c1df2000->00000000c1df3000
(XEN) TOTAL: 00000000c0000000->00000000c2000000
(XEN) ENTRY ADDRESS: 00000000c17a6000
(XEN) Dom0 has maximum 8 VCPUs
(XEN) Scrubbing Free RAM: ................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 176kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Reserving virtual address space above 0xff800000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.17 (root@exile) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #4 SMP Fri Aug 6 17:19:19 BST 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009c400 (usable)
[ 0.000000] Xen: 000000000009c400 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000030000000 (usable)
[ 0.000000] Xen: 00000000cfee0000 - 00000000cfee5000 (ACPI data)
[ 0.000000] Xen: 00000000cfee5000 - 00000000cfef1000 (ACPI NVS)
[ 0.000000] Xen: 00000000cfef1000 - 00000000d0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec03000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x30000 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009c400 (usable)
[ 0.000000] modified: 000000000009c400 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000030000000 (usable)
[ 0.000000] modified: 00000000cfee0000 - 00000000cfee5000 (ACPI data)
[ 0.000000] modified: 00000000cfee5000 - 00000000cfef1000 (ACPI NVS)
[ 0.000000] modified: 00000000cfef1000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec03000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 027ff000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000030000000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0030000000 page 4k
[ 0.000000] kernel direct mapping tables up to 30000000 @ 100000-284000
[ 0.000000] RAMDISK: 01a04000 - 01d1ae00
[ 0.000000] ACPI: RSDP 000f8080 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT cfee01fe 0005C (v01 BRCM EXPLOSN 06040000 PTL 02000001)
[ 0.000000] ACPI: FACP cfee02ce 000F4 (v03 BRCM EXPLOSN 06040000 MSFT 02000001)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/C (20090903/tbfadt-557)
[ 0.000000] ACPI: DSDT cfee03c2 04949 (v02 BRCM EXPLOSN 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS cfef0fc0 00040
[ 0.000000] ACPI: TCPA cfee4d0b 00032 (v01 BRCM EXPLOSN 06040000 PTL 20000001)
[ 0.000000] ACPI: SRAT cfee4d3d 00128 (v01 AMD FAM_F_10 06040000 AMD 00000001)
[ 0.000000] ACPI: HPET cfee4e65 00038 (v01 BRCM EXPLOSN 06040000 BRCM 02000001)
[ 0.000000] ACPI: SSDT cfee4e9d 00049 (v01 BRCM PRT0 06040000 BRCM 02000001)
[ 0.000000] ACPI: SPCR cfee4ee6 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
[ 0.000000] ACPI: APIC cfee4f36 000CA (v01 BRCM EXPLOSN 06040000 PTL 02000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 768MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 30000000
[ 0.000000] low ram: 0 - 30000000
[ 0.000000] node 0 low ram: 00000000 - 30000000
[ 0.000000] node 0 bootmap 00010000 - 00016000
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 0030000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0001dde000 - 0001df4000] XEN PAGETABLES ==> [0001dde000 - 0001df4000]
[ 0.000000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #4 [0001000000 - 00018de9a4] TEXT DATA BSS ==> [0001000000 - 00018de9a4]
[ 0.000000] #5 [0001a04000 - 0001d1ae00] RAMDISK ==> [0001a04000 - 0001d1ae00]
[ 0.000000] #6 [0001d1b000 - 0001dde000] XEN START INFO ==> [0001d1b000 - 0001dde000]
[ 0.000000] #7 [00018df000 - 00018df18c] BRK ==> [00018df000 - 00018df18c]
[ 0.000000] #8 [0000100000 - 000026d000] PGTABLE ==> [0000100000 - 000026d000]
[ 0.000000] #9 [0000010000 - 0000016000] BOOTMAP ==> [0000010000 - 0000016000]
[ 0.000000] found SMP MP-table at [c00f80b0] f80b0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00030000
[ 0.000000] HighMem 0x00030000 -> 0x00030000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x00030000
[ 0.000000] On node 0 totalpages: 196492
[ 0.000000] free_area_init_node: node 0, pgdat c1798b60, node_mem_map c1df4200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3948 pages, LIFO batch:0
[ 0.000000] Normal zone: 1504 pages used for memmap
[ 0.000000] Normal zone: 191008 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16])
[ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec01000, GSI 16-16
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32])
[ 0.000000] IOAPIC[2]: apic_id 10, version 0, address 0xfec02000, GSI 32-32
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x1166a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 288
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:9fee0000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.1-unstable (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @c23fa000 s37048 r0 d24392 u65536
[ 0.000000] pcpu-alloc: s37048 r0 d24392 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] trying to map vcpu_info 0 at c23fb028, mfn 12c886, offset 40
[ 0.000000] cpu 0 using vcpu_info at c23fb028
[ 0.000000] trying to map vcpu_info 1 at c240b028, mfn 12c896, offset 40
[ 0.000000] cpu 1 using vcpu_info at c240b028
[ 0.000000] trying to map vcpu_info 2 at c241b028, mfn 12c8a6, offset 40
[ 0.000000] cpu 2 using vcpu_info at c241b028
[ 0.000000] trying to map vcpu_info 3 at c242b028, mfn 12c8b6, offset 40
[ 0.000000] cpu 3 using vcpu_info at c242b028
[ 0.000000] trying to map vcpu_info 4 at c243b028, mfn 12c8c6, offset 40
[ 0.000000] cpu 4 using vcpu_info at c243b028
[ 0.000000] trying to map vcpu_info 5 at c244b028, mfn 12c8d6, offset 40
[ 0.000000] cpu 5 using vcpu_info at c244b028
[ 0.000000] trying to map vcpu_info 6 at c245b028, mfn 12c8e6, offset 40
[ 0.000000] cpu 6 using vcpu_info at c245b028
[ 0.000000] trying to map vcpu_info 7 at c246b028, mfn 12c8f6, offset 40
[ 0.000000] cpu 7 using vcpu_info at c246b028
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194956
[ 0.000000] Kernel command line: root=/dev/sdb1 ro console=hvc0 earlyprintk=xen nomodeset loglevel=10 debug
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between c253d000 - c653d000
[ 0.000000] DMA: software IO TLB at phys 0x253d000 - 0x653d000
[ 0.000000] xen_swiotlb_fixup: buf=c253d000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=c659d000 size=32768
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 697580k/786432k available (4910k kernel code, 88008k reserved, 2921k data, 460k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xff71d000 - 0xff7ff000 ( 904 kB)
[ 0.000000] pkmap : 0xff200000 - 0xff400000 (2048 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff1fe000 ( 233 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] .init : 0xc17a6000 - 0xc1819000 ( 460 kB)
[ 0.000000] .data : 0xc14cb98a - 0xc17a5f4c (2921 kB)
[ 0.000000] .text : 0xc1000000 - 0xc14cb98a (4910 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:2304
[ 0.000000] xen: --> irq=0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen: --> irq=2
[ 0.000000] xen: --> irq=3
[ 0.000000] xen: --> irq=4
[ 0.000000] xen: --> irq=5
[ 0.000000] xen: --> irq=6
[ 0.000000] xen: --> irq=7
[ 0.000000] xen: --> irq=8
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: --> irq=10
[ 0.000000] xen: --> irq=11
[ 0.000000] xen: --> irq=12
[ 0.000000] xen: --> irq=13
[ 0.000000] xen: --> irq=14
[ 0.000000] xen: --> irq=15
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] xen_acpi_parse_int_src_ovr: intsrc->source_irq == acpi_gbl_FADT.sci_interrupt failed, not registering (0 9)
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] alloc irq_desc for 2303 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] Detected 1995.082 MHz processor.
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.16 BogoMIPS (lpj=1995082)
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Initializing.
[ 0.000999] SELinux: Starting in permissive mode
[ 0.000999] Mount-cache hash table entries: 512
[ 0.001260] Initializing cgroup subsys ns
[ 0.001999] Initializing cgroup subsys cpuacct
[ 0.001999] Initializing cgroup subsys freezer
[ 0.002043] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003020] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003999] CPU: Physical Processor ID: 0
[ 0.003999] CPU: Processor Core ID: 0
[ 0.004022] mce: CPU supports 6 MCE banks
[ 0.005041] Performance Events: AMD PMU driver.
[ 0.005999] ------------[ cut here ]------------
[ 0.005999] WARNING: at /root/xen-unstable.hg/linux-2.6-pvops.git/arch/x86/xen/enlighten.c:742 xen_apic_write+0x12/0x14()
[ 0.005999] Hardware name: empty
[ 0.005999] Modules linked in:
[ 0.005999] Pid: 0, comm: swapper Not tainted 2.6.32.17 #4
[ 0.005999] Call Trace:
[ 0.005999] [<c10622e9>] warn_slowpath_common+0x60/0x90
[ 0.005999] [<c1062326>] warn_slowpath_null+0xd/0x10
[ 0.005999] [<c1029c86>] xen_apic_write+0x12/0x14
[ 0.005999] [<c1038e53>] perf_events_lapic_init+0x2b/0x2d
[ 0.005999] [<c17b0285>] init_hw_perf_events+0x2e5/0x37f
[ 0.005999] [<c17afdf1>] identify_boot_cpu+0x21/0x23
[ 0.005999] [<c17afe9c>] check_bugs+0xb/0x10f
[ 0.005999] [<c10a5c5d>] ? delayacct_init+0x42/0x45
[ 0.005999] [<c17a685e>] start_kernel+0x30b/0x31a
[ 0.005999] [<c17a60a2>] i386_start_kernel+0x91/0x96
[ 0.005999] [<c17a9ef6>] xen_start_kernel+0x5d4/0x5dc
[ 0.005999] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.005999] ... version: 0
[ 0.005999] ... bit width: 48
[ 0.005999] ... generic registers: 4
[ 0.005999] ... value mask: 0000ffffffffffff
[ 0.005999] ... max period: 00007fffffffffff
[ 0.005999] ... fixed-purpose events: 0
[ 0.005999] ... event mask: 000000000000000f
[ 0.007188] SMP alternatives: switching to UP code
[ 0.008998] ACPI: Core revision 20090903
[ 0.021172] alloc irq_desc for 2302 on node 0
[ 0.021996] alloc kstat_irqs on node 0
[ 0.022023] alloc irq_desc for 2301 on node 0
[ 0.022996] alloc kstat_irqs on node 0
[ 0.023021] alloc irq_desc for 2300 on node 0
[ 0.023996] alloc kstat_irqs on node 0
[ 0.023996] alloc irq_desc for 2299 on node 0
[ 0.023996] alloc kstat_irqs on node 0
[ 0.024403] installing Xen timer for CPU 1
[ 0.025013] alloc irq_desc for 2298 on node 0
[ 0.025996] alloc kstat_irqs on node 0
[ 0.026063] SMP alternatives: switching to SMP code
[ 0.028995] alloc irq_desc for 2297 on node 0
[ 0.028995] alloc kstat_irqs on node 0
[ 0.029021] alloc irq_desc for 2296 on node 0
[ 0.029995] alloc kstat_irqs on node 0
[ 0.030021] alloc irq_desc for 2295 on node 0
[ 0.030995] alloc kstat_irqs on node 0
[ 0.030995] alloc irq_desc for 2294 on node 0
[ 0.030995] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#1
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.031405] installing Xen timer for CPU 2
[ 0.032013] alloc irq_desc for 2293 on node 0
[ 0.032994] alloc kstat_irqs on node 0
[ 0.033075] alloc irq_desc for 2292 on node 0
[ 0.033994] alloc kstat_irqs on node 0
[ 0.034020] alloc irq_desc for 2291 on node 0
[ 0.034994] alloc kstat_irqs on node 0
[ 0.035021] alloc irq_desc for 2290 on node 0
[ 0.035994] alloc kstat_irqs on node 0
[ 0.035994] alloc irq_desc for 2289 on node 0
[ 0.035994] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#2
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 2
[ 0.036388] installing Xen timer for CPU 3
[ 0.037011] alloc irq_desc for 2288 on node 0
[ 0.037994] alloc kstat_irqs on node 0
[ 0.038073] alloc irq_desc for 2287 on node 0
[ 0.038994] alloc kstat_irqs on node 0
[ 0.039019] alloc irq_desc for 2286 on node 0
[ 0.039993] alloc kstat_irqs on node 0
[ 0.040020] alloc irq_desc for 2285 on node 0
[ 0.040993] alloc kstat_irqs on node 0
[ 0.040993] alloc irq_desc for 2284 on node 0
[ 0.040993] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#3
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 3
[ 0.041386] installing Xen timer for CPU 4
[ 0.042011] alloc irq_desc for 2283 on node 0
[ 0.042993] alloc kstat_irqs on node 0
[ 0.043071] alloc irq_desc for 2282 on node 0
[ 0.043993] alloc kstat_irqs on node 0
[ 0.044019] alloc irq_desc for 2281 on node 0
[ 0.044993] alloc kstat_irqs on node 0
[ 0.045019] alloc irq_desc for 2280 on node 0
[ 0.045993] alloc kstat_irqs on node 0
[ 0.046024] alloc irq_desc for 2279 on node 0
[ 0.046992] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#4
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 1
[ 0.000999] CPU: Processor Core ID: 0
[ 0.047362] installing Xen timer for CPU 5
[ 0.048011] alloc irq_desc for 2278 on node 0
[ 0.048992] alloc kstat_irqs on node 0
[ 0.049070] alloc irq_desc for 2277 on node 0
[ 0.049992] alloc kstat_irqs on node 0
[ 0.050019] alloc irq_desc for 2276 on node 0
[ 0.050992] alloc kstat_irqs on node 0
[ 0.051019] alloc irq_desc for 2275 on node 0
[ 0.051992] alloc kstat_irqs on node 0
[ 0.051992] alloc irq_desc for 2274 on node 0
[ 0.051992] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#5
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 1
[ 0.000999] CPU: Processor Core ID: 1
[ 0.052355] installing Xen timer for CPU 6
[ 0.053010] alloc irq_desc for 2273 on node 0
[ 0.053991] alloc kstat_irqs on node 0
[ 0.054068] alloc irq_desc for 2272 on node 0
[ 0.054991] alloc kstat_irqs on node 0
[ 0.055018] alloc irq_desc for 2271 on node 0
[ 0.055991] alloc kstat_irqs on node 0
[ 0.056018] alloc irq_desc for 2270 on node 0
[ 0.056991] alloc kstat_irqs on node 0
[ 0.056991] alloc irq_desc for 2269 on node 0
[ 0.056991] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#6
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 1
[ 0.000999] CPU: Processor Core ID: 2
[ 0.057370] installing Xen timer for CPU 7
[ 0.058010] alloc irq_desc for 2268 on node 0
[ 0.058991] alloc kstat_irqs on node 0
[ 0.059068] alloc irq_desc for 2267 on node 0
[ 0.059990] alloc kstat_irqs on node 0
[ 0.060018] alloc irq_desc for 2266 on node 0
[ 0.060990] alloc kstat_irqs on node 0
[ 0.061018] alloc irq_desc for 2265 on node 0
[ 0.061990] alloc kstat_irqs on node 0
[ 0.061990] alloc irq_desc for 2264 on node 0
[ 0.061990] alloc kstat_irqs on node 0
[ 0.000999] Initializing CPU#7
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 1
[ 0.000999] CPU: Processor Core ID: 3
[ 0.062293] Brought up 8 CPUs
[ 0.065147] Grant table initialized
[ 0.065989] Time: 17:40:20 Date: 08/11/10
[ 0.066091] NET: Registered protocol family 16
[ 0.067126] alloc irq_desc for 2263 on node 0
[ 0.067989] alloc kstat_irqs on node 0
[ 0.068151] ACPI: bus type pci registered
[ 0.069338] PCI: BIOS BUG #32[0000014a] found
[ 0.069989] PCI: Using configuration type 1 for base access
[ 0.069989] PCI: Using configuration type 1 for extended access
[ 0.094089] bio: create slab <bio-0> at 0
[ 0.098180] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.099018] ACPI: EC: Look up EC in DSDT
[ 0.110957] ACPI: Interpreter enabled
[ 0.110983] ACPI: (supports S0 S1 S4 S5)
[ 0.110983] ACPI: Using IOAPIC for interrupt routing
[ 0.137019] ACPI: No dock devices found.
[ 0.140345] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.141140] pci 0000:00:01.0: Enabling HT MSI Mapping
[ 0.141978] pci 0000:00:02.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.141978] pci 0000:00:02.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.141978] pci 0000:00:02.1: reg 18 io port: [0x170-0x177]
[ 0.141978] pci 0000:00:02.1: reg 1c io port: [0x374-0x377]
[ 0.141978] pci 0000:00:02.1: reg 20 io port: [0x4800-0x480f]
[ 0.141978] pci 0000:00:03.0: reg 10 32bit mmio: [0xd8510000-0xd8510fff]
[ 0.141978] pci 0000:00:03.0: reg 14 io port: [0x4c00-0x4cff]
[ 0.141978] pci 0000:00:03.1: reg 10 32bit mmio: [0xd8511000-0xd8511fff]
[ 0.141978] pci 0000:00:03.1: reg 14 io port: [0x5000-0x50ff]
[ 0.141978] pci 0000:00:03.2: reg 10 32bit mmio: [0xd8512000-0xd8512fff]
[ 0.141978] pci 0000:00:03.2: reg 14 io port: [0x5400-0x54ff]
[ 0.141978] pci 0000:00:03.2: supports D1 D2
[ 0.141978] pci 0000:00:03.2: PME# supported from D0 D1 D2 D3hot
[ 0.141978] pci 0000:00:03.2: PME# disabled
[ 0.141978] pci 0000:00:04.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.141978] pci 0000:00:04.0: reg 14 io port: [0x5800-0x58ff]
[ 0.141978] pci 0000:00:04.0: reg 18 32bit mmio: [0xd8500000-0xd850ffff]
[ 0.142001] pci 0000:00:04.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.142978] pci 0000:00:04.0: supports D1 D2
[ 0.143115] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.143978] pci 0000:00:06.0: PME# disabled
[ 0.143978] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.143978] pci 0000:00:07.0: PME# disabled
[ 0.144121] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
[ 0.144977] pci 0000:00:08.0: PME# disabled
[ 0.145126] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.145977] pci 0000:00:09.0: PME# disabled
[ 0.145977] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.145977] pci 0000:00:0a.0: PME# disabled
[ 0.145977] pci 0000:01:0e.0: reg 10 io port: [0x6040-0x6047]
[ 0.145977] pci 0000:01:0e.0: reg 14 io port: [0x6034-0x6037]
[ 0.145977] pci 0000:01:0e.0: reg 18 io port: [0x6038-0x603f]
[ 0.145977] pci 0000:01:0e.0: reg 1c io port: [0x6030-0x6033]
[ 0.145977] pci 0000:01:0e.0: reg 20 io port: [0x6000-0x600f]
[ 0.145977] pci 0000:01:0e.0: reg 24 32bit mmio: [0xd8300000-0xd8301fff]
[ 0.145977] pci 0000:01:0e.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.145977] pci 0000:01:0e.1: reg 10 io port: [0x6058-0x605f]
[ 0.145977] pci 0000:01:0e.1: reg 14 io port: [0x604c-0x604f]
[ 0.145977] pci 0000:01:0e.1: reg 18 io port: [0x6050-0x6057]
[ 0.145977] pci 0000:01:0e.1: reg 1c io port: [0x6048-0x604b]
[ 0.145977] pci 0000:01:0e.1: reg 20 io port: [0x6020-0x602f]
[ 0.145977] pci 0000:00:01.0: bridge io port: [0x6000-0x6fff]
[ 0.145977] pci 0000:00:01.0: bridge 32bit mmio: [0xd8300000-0xd83fffff]
[ 0.146065] pci 0000:06:00.0: reg 10 io port: [0x7000-0x70ff]
[ 0.146977] pci 0000:06:00.0: reg 14 64bit mmio: [0xd8210000-0xd8213fff]
[ 0.146977] pci 0000:06:00.0: reg 1c 64bit mmio: [0xd8200000-0xd820ffff]
[ 0.146977] pci 0000:06:00.0: reg 30 32bit mmio pref: [0x000000-0x0fffff]
[ 0.146977] pci 0000:06:00.0: supports D1 D2
[ 0.146977] pci 0000:00:09.0: bridge io port: [0x7000-0x7fff]
[ 0.146977] pci 0000:00:09.0: bridge 32bit mmio: [0xd8200000-0xd82fffff]
[ 0.146977] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.146977] pci 0000:07:00.0: PME# disabled
[ 0.146977] pci 0000:00:0a.0: bridge 32bit mmio: [0xd8400000-0xd84fffff]
[ 0.146977] pci 0000:08:04.0: reg 10 64bit mmio: [0xd8410000-0xd841ffff]
[ 0.146977] pci 0000:08:04.0: reg 18 64bit mmio: [0xd8400000-0xd840ffff]
[ 0.146977] pci 0000:08:04.0: PME# supported from D3hot D3cold
[ 0.146977] pci 0000:08:04.0: PME# disabled
[ 0.146977] pci 0000:08:04.1: reg 10 64bit mmio: [0xd8430000-0xd843ffff]
[ 0.146977] pci 0000:08:04.1: reg 18 64bit mmio: [0xd8420000-0xd842ffff]
[ 0.146977] pci 0000:08:04.1: PME# supported from D3hot D3cold
[ 0.146977] pci 0000:08:04.1: PME# disabled
[ 0.146977] pci 0000:07:00.0: bridge 32bit mmio: [0xd8400000-0xd84fffff]
[ 0.146977] pci_bus 0000:00: on NUMA node 0
[ 0.146977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.147592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXB_._PRT]
[ 0.148157] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXB_.PPBX._PRT]
[ 0.149126] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB0._PRT]
[ 0.150125] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB1._PRT]
[ 0.150977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB2._PRT]
[ 0.151141] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB3._PRT]
[ 0.152139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB4._PRT]
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:02.0
(XEN) PCI add device 00:02.1
(XEN) PCI add device 00:02.2
(XEN) PCI add device 00:03.0
(XEN) PCI add device 00:03.1
(XEN) PCI add device 00:03.2
(XEN) PCI add device 00:04.0
(XEN) PCI add device 00:06.0
(XEN) PCI add device 00:07.0
(XEN) PCI add device 00:08.0
(XEN) PCI add device 00:09.0
(XEN) PCI add device 00:0a.0
(XEN) PCI add device 00:18.0
(XEN) PCI add device 00:18.1
(XEN) PCI add device 00:18.2
(XEN) PCI add device 00:18.3
(XEN) PCI add device 00:18.4
(XEN) PCI add device 00:19.0
(XEN) PCI add device 00:19.1
(XEN) PCI add device 00:19.2
(XEN) PCI add device 00:19.3
(XEN) PCI add device 00:19.4
(XEN) PCI add device 01:0d.0
(XEN) PCI add device 01:0e.0
(XEN) PCI add device 01:0e.1
(XEN) PCI add device 06:00.0
(XEN) PCI add device 07:00.0
(XEN) PCI add device 08:04.0
(XEN) PCI add device 08:04.1
[ 0.183206] ACPI: PCI Interrupt Link [LNKU] (IRQs *10 11)
[ 0.184161] ACPI: PCI Interrupt Link [LNKW] (IRQs 10 11) *0, disabled.
[ 0.185221] ACPI: PCI Interrupt Link [LNKS] (IRQs 5 *7 11)
[ 0.186152] ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.187150] ACPI: PCI Interrupt Link [LN01] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.188153] ACPI: PCI Interrupt Link [LN02] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.189146] ACPI: PCI Interrupt Link [LN03] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.190167] ACPI: PCI Interrupt Link [LN04] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.191159] ACPI: PCI Interrupt Link [LN05] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.192180] ACPI: PCI Interrupt Link [LN06] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.193158] ACPI: PCI Interrupt Link [LN07] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.194160] ACPI: PCI Interrupt Link [LN08] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.195160] ACPI: PCI Interrupt Link [LN09] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.196162] ACPI: PCI Interrupt Link [LN0A] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.197150] ACPI: PCI Interrupt Link [LN0B] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.198162] ACPI: PCI Interrupt Link [LN0C] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.199157] ACPI: PCI Interrupt Link [LN0D] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.200163] ACPI: PCI Interrupt Link [LN0E] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.201156] ACPI: PCI Interrupt Link [LN0F] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.202235] ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 7 *11 12 14 15)
[ 0.203141] ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.204147] ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.205233] ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 *5 7 11 12 14 15)
[ 0.206237] ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 5 7 *11 12 14 15)
[ 0.207153] ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.208157] ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.209149] ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.210146] ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.211153] ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.212156] ACPI: PCI Interrupt Link [LN1A] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.213103] ACPI: PCI Interrupt Link [LN1B] (IRQs 3 4 *5 7 11 12 14 15)
[ 0.214022] ACPI: PCI Interrupt Link [LN1C] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.215029] ACPI: PCI Interrupt Link [LN1D] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.216029] ACPI: PCI Interrupt Link [LN1E] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.217023] ACPI: PCI Interrupt Link [LN1F] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.218080] sync cpu 0 get result 1 max_id 7
[ 0.219063] sync cpu 1 get result 1 max_id 7
[ 0.220062] sync cpu 2 get result 1 max_id 7
[ 0.221061] sync cpu 3 get result 1 max_id 7
[ 0.222062] sync cpu 4 get result 1 max_id 7
[ 0.223061] sync cpu 5 get result 1 max_id 7
[ 0.224063] sync cpu 6 get result 1 max_id 7
[ 0.225073] sync cpu 7 get result 1 max_id 7
[ 0.225996] alloc irq_desc for 2262 on node 0
[ 0.226965] alloc kstat_irqs on node 0
[ 0.227006] xen_balloon: Initialising balloon driver with page order 0.
[ 0.228033] vgaarb: device added: PCI:0000:00:04.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.228965] vgaarb: loaded
[ 0.229225] SCSI subsystem initialized
[ 0.230059] libata version 3.00 loaded.
[ 0.231069] usbcore: registered new interface driver usbfs
[ 0.231989] usbcore: registered new interface driver hub
[ 0.233049] usbcore: registered new device driver usb
[ 0.234057] PCI: Using ACPI for IRQ routing
[ 0.235081] NetLabel: Initializing
[ 0.235964] NetLabel: domain hash size = 128
[ 0.235964] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.235964] NetLabel: unlabeled traffic allowed by default
[ 0.236300] Switching to clocksource xen
[ 0.241486] pnp: PnP ACPI init
[ 0.242008] ACPI: bus type pnp registered
[ 0.251789] xen: registering gsi 8 triggering 1 polarity 0
[ 0.252639] xen_allocate_pirq: returning irq 8 for gsi 8
[ 0.252639] xen: --> irq=8
[ 0.268412] xen: registering gsi 1 triggering 1 polarity 0
[ 0.269009] xen_allocate_pirq: returning irq 1 for gsi 1
[ 0.269009] xen: --> irq=1
[ 0.283132] xen: registering gsi 13 triggering 1 polarity 0
[ 0.284029] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.284029] xen: --> irq=13
[ 0.297808] xen: registering gsi 12 triggering 1 polarity 0
[ 0.298767] xen_allocate_pirq: returning irq 12 for gsi 12
[ 0.298767] xen: --> irq=12
[ 0.313361] xen: registering gsi 4 triggering 1 polarity 0
[ 0.314010] xen_allocate_pirq: returning irq 4 for gsi 4
[ 0.314010] xen: --> irq=4
[ 0.327069] Already setup the GSI :4
[ 0.331501] xen: registering gsi 3 triggering 1 polarity 0
[ 0.332065] xen_allocate_pirq: returning irq 3 for gsi 3
[ 0.332065] xen: --> irq=3
[ 0.345891] xen: registering gsi 6 triggering 1 polarity 0
[ 0.346604] xen_allocate_pirq: returning irq 6 for gsi 6
[ 0.346604] xen: --> irq=6
[ 0.360307] pnp: PnP ACPI: found 16 devices
[ 0.361211] ACPI: ACPI bus type pnp unregistered
[ 0.361211] system 00:00: iomem range 0xfed08000-0xfed08007 has been reserved
[ 0.361211] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.361211] system 00:0b: ioport range 0x40b-0x40b has been reserved
[ 0.361211] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.361211] system 00:0b: ioport range 0x4d6-0x4d6 has been reserved
[ 0.361211] system 00:0b: ioport range 0x500-0x560 has been reserved
[ 0.361211] system 00:0b: ioport range 0x558-0x55b has been reserved
[ 0.361211] system 00:0b: ioport range 0x580-0x58f has been reserved
[ 0.361211] system 00:0b: ioport range 0x590-0x593 has been reserved
[ 0.361211] system 00:0b: ioport range 0x600-0x61f has been reserved
[ 0.361211] system 00:0b: ioport range 0x620-0x623 has been reserved
[ 0.361211] system 00:0b: ioport range 0x700-0x703 has been reserved
[ 0.361211] system 00:0b: ioport range 0xc00-0xc01 has been reserved
[ 0.361211] system 00:0b: ioport range 0xc06-0xc08 has been reserved
[ 0.361211] system 00:0b: ioport range 0xc14-0xc14 has been reserved
[ 0.361211] system 00:0b: ioport range 0xc49-0xc4a has been reserved
[ 0.361211] system 00:0b: ioport range 0xc50-0xc53 has been reserved
[ 0.361211] system 00:0b: ioport range 0xc6c-0xc6c has been reserved
[ 0.361211] system 00:0b: ioport range 0xc6f-0xc6f has been reserved
[ 0.361211] system 00:0b: ioport range 0xcd6-0xcd7 has been reserved
[ 0.361211] system 00:0b: ioport range 0xcf9-0xcf9 could not be reserved
[ 0.361211] system 00:0b: ioport range 0xf50-0xf58 has been reserved
[ 0.512572] pciback 0000:00:01.0: probing...
[ 0.513527] pciback 0000:00:02.0: probing...
[ 0.513527] pciback 0000:00:02.1: probing...
[ 0.513527] pciback 0000:00:02.2: probing...
[ 0.513527] pciback 0000:00:03.0: probing...
[ 0.513527] pciback 0000:00:03.1: probing...
[ 0.513527] pciback 0000:00:03.2: probing...
[ 0.513527] pciback 0000:00:04.0: probing...
[ 0.513527] pciback 0000:00:06.0: probing...
[ 0.513527] pciback 0000:00:07.0: probing...
[ 0.513527] pciback 0000:00:08.0: probing...
[ 0.513527] pciback 0000:00:09.0: probing...
[ 0.513527] pciback 0000:00:0a.0: probing...
[ 0.513527] pciback 0000:00:18.0: probing...
[ 0.513527] pciback 0000:00:18.1: probing...
[ 0.513527] pciback 0000:00:18.2: probing...
[ 0.513527] pciback 0000:00:18.3: probing...
[ 0.513527] pciback 0000:00:18.4: probing...
[ 0.513527] pciback 0000:00:19.0: probing...
[ 0.513527] pciback 0000:00:19.1: probing...
[ 0.513527] pciback 0000:00:19.2: probing...
[ 0.513527] pciback 0000:00:19.3: probing...
[ 0.513527] pciback 0000:00:19.4: probing...
[ 0.513527] pciback 0000:01:0d.0: probing...
[ 0.513527] pciback 0000:01:0e.0: probing...
[ 0.513527] pciback 0000:01:0e.1: probing...
[ 0.513527] pciback 0000:06:00.0: probing...
[ 0.513527] pciback 0000:07:00.0: probing...
[ 0.513527] pciback 0000:08:04.0: probing...
[ 0.513527] pciback 0000:08:04.1: probing...
[ 0.648300] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.649011] pci 0000:01:0d.0: PCI bridge, secondary bus 0000:02
[ 0.649011] pci 0000:01:0d.0: IO window: disabled
[ 0.649011] pci 0000:01:0d.0: MEM window: disabled
[ 0.649011] pci 0000:01:0d.0: PREFETCH window: disabled
[ 0.649011] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.649011] pci 0000:00:01.0: IO window: 0x6000-0x6fff
[ 0.649011] pci 0000:00:01.0: MEM window: 0xd8300000-0xd83fffff
[ 0.649011] pci 0000:00:01.0: PREFETCH window: 0x30000000-0x300fffff
[ 0.649011] pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
[ 0.649011] pci 0000:00:06.0: IO window: disabled
[ 0.649011] pci 0000:00:06.0: MEM window: disabled
[ 0.649011] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.649011] pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
[ 0.649011] pci 0000:00:07.0: IO window: disabled
[ 0.649011] pci 0000:00:07.0: MEM window: disabled
[ 0.649011] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.649011] pci 0000:00:08.0: PCI bridge, secondary bus 0000:05
[ 0.649011] pci 0000:00:08.0: IO window: disabled
[ 0.649011] pci 0000:00:08.0: MEM window: disabled
[ 0.649011] pci 0000:00:08.0: PREFETCH window: disabled
[ 0.649011] pci 0000:00:09.0: PCI bridge, secondary bus 0000:06
[ 0.649011] pci 0000:00:09.0: IO window: 0x7000-0x7fff
[ 0.649011] pci 0000:00:09.0: MEM window: 0xd8200000-0xd82fffff
[ 0.649011] pci 0000:00:09.0: PREFETCH window: 0x30100000-0x301fffff
[ 0.649011] pci 0000:07:00.0: PCI bridge, secondary bus 0000:08
[ 0.649011] pci 0000:07:00.0: IO window: disabled
[ 0.649011] pci 0000:07:00.0: MEM window: 0xd8400000-0xd84fffff
[ 0.649011] pci 0000:07:00.0: PREFETCH window: disabled
[ 0.649011] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:07
[ 0.649011] pci 0000:00:0a.0: IO window: disabled
[ 0.649011] pci 0000:00:0a.0: MEM window: 0xd8400000-0xd84fffff
[ 0.649011] pci 0000:00:0a.0: PREFETCH window: disabled
[ 0.649011] xen: registering gsi 32 triggering 0 polarity 1
[ 0.649011] alloc irq_desc for 32 on node 0
[ 0.649011] alloc kstat_irqs on node 0
[ 0.848196] xen: --> irq=32
[ 0.851064] pci 0000:00:06.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 0.852036] pci 0000:00:06.0: setting latency timer to 64
[ 0.852036] xen: registering gsi 32 triggering 0 polarity 1
[ 0.852036] xen_allocate_pirq: returning irq 32 for gsi 32
[ 0.852036] xen: --> irq=32
[ 0.877337] Already setup the GSI :32
[ 0.878320] pci 0000:00:07.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 0.878320] pci 0000:00:07.0: setting latency timer to 64
[ 0.878320] xen: registering gsi 32 triggering 0 polarity 1
[ 0.878320] xen_allocate_pirq: returning irq 32 for gsi 32
[ 0.878320] xen: --> irq=32
[ 0.907427] Already setup the GSI :32
[ 0.908410] pci 0000:00:08.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 0.908410] pci 0000:00:08.0: setting latency timer to 64
[ 0.908410] xen: registering gsi 32 triggering 0 polarity 1
[ 0.908410] xen_allocate_pirq: returning irq 32 for gsi 32
[ 0.908410] xen: --> irq=32
[ 0.937506] Already setup the GSI :32
[ 0.938490] pci 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 0.938490] pci 0000:00:09.0: setting latency timer to 64
[ 0.938490] xen: registering gsi 32 triggering 0 polarity 1
[ 0.938490] xen_allocate_pirq: returning irq 32 for gsi 32
[ 0.938490] xen: --> irq=32
[ 0.967603] Already setup the GSI :32
[ 0.968586] pci 0000:00:0a.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 0.968586] pci 0000:00:0a.0: setting latency timer to 64
[ 0.968586] pci 0000:07:00.0: setting latency timer to 64
[ 0.968586] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.968586] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.968586] pci_bus 0000:01: resource 0 io: [0x6000-0x6fff]
[ 0.968586] pci_bus 0000:01: resource 1 mem: [0xd8300000-0xd83fffff]
[ 0.968586] pci_bus 0000:01: resource 2 pref mem [0x30000000-0x300fffff]
[ 0.968586] pci_bus 0000:06: resource 0 io: [0x7000-0x7fff]
[ 0.968586] pci_bus 0000:06: resource 1 mem: [0xd8200000-0xd82fffff]
[ 0.968586] pci_bus 0000:06: resource 2 pref mem [0x30100000-0x301fffff]
[ 0.968586] pci_bus 0000:07: resource 1 mem: [0xd8400000-0xd84fffff]
[ 0.968586] pci_bus 0000:08: resource 1 mem: [0xd8400000-0xd84fffff]
[ 0.968586] NET: Registered protocol family 2
[ 0.968586] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.064543] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.072669] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.073401] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.073401] TCP reno registered
[ 1.089732] NET: Registered protocol family 1
[ 1.094819] RPC: Registered udp transport module.
[ 1.095708] RPC: Registered tcp transport module.
[ 1.095708] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.111062] pci 0000:00:02.0: disabled boot interrupts on device [1166:0205]
[ 1.118584] pci 0000:00:04.0: Boot video device
[ 1.123435] Trying to unpack rootfs image as initramfs...
[ 1.137098] Freeing initrd memory: 3163k freed
[ 1.138069] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.138069] DMA: Placing 64MB software IO TLB between c253d000 - c653d000
[ 1.138069] DMA: software IO TLB at phys 0x253d000 - 0x653d000
[ 1.162480] kvm: no hardware support
[ 1.166164] has_svm: svm not available
[ 1.167136] kvm: no hardware support
[ 1.182094] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.183075] Scanning for low memory corruption every 60 seconds
[ 1.196735] audit: initializing netlink socket (disabled)
[ 1.202243] type=2000 audit(1281548421.211:1): initialized
[ 1.218096] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.231108] VFS: Disk quotas dquot_6.5.2
[ 1.235351] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.243971] msgmni has been set to 1369
[ 1.248179] SELinux: Registering netfilter hooks
[ 1.254377] alg: No test for stdrng (krng)
[ 1.258875] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.259857] io scheduler noop registered
[ 1.259857] io scheduler anticipatory registered
[ 1.259857] io scheduler deadline registered
[ 1.279543] io scheduler cfq registered (default)
[ 1.284745] alloc irq_desc for 2261 on node 0
[ 1.285534] alloc kstat_irqs on node 0
[ 1.293376] pcieport 0000:00:06.0: setting latency timer to 64
[ 1.299727] alloc irq_desc for 2260 on node 0
[ 1.300496] alloc kstat_irqs on node 0
[ 1.308342] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.314696] alloc irq_desc for 2259 on node 0
[ 1.315460] alloc kstat_irqs on node 0
[ 1.323316] pcieport 0000:00:08.0: setting latency timer to 64
[ 1.329654] alloc irq_desc for 2258 on node 0
[ 1.330423] alloc kstat_irqs on node 0
[ 1.338261] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.344603] alloc irq_desc for 2257 on node 0
[ 1.345374] alloc kstat_irqs on node 0
[ 1.353221] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.359875] aer 0000:00:06.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.360824] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.360824] aer 0000:00:08.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.360824] aer 0000:00:09.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.360824] aer 0000:00:0a.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.399995] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.406542] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input0
[ 1.407527] ACPI: Power Button [PWRB]
[ 1.419928] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.420913] ACPI: Power Button [PWRF]
[ 1.431494] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input2
[ 1.432477] ACPI: Sleep Button [SLPF]
[ 1.450802] Event-channel device installed.
[ 1.455218] pciback: pcistub_init_devices_late
[ 1.468502] blktap_device_init: blktap device major 253
[ 1.469322] blktap_ring_init: blktap ring major: 251
[ 1.490229] registering netback
[ 1.502921] alloc irq_desc for 2256 on node 0
[ 1.503885] alloc kstat_irqs on node 0
[ 1.513040] hpet_acpi_add: no address or irqs in _CRS
[ 1.518452] Non-volatile memory driver v1.3
[ 1.519430] Linux agpgart interface v0.103
[ 1.527991] [drm] Initialized drm 1.1.0 20060810
[ 1.528923] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.783200] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.851613] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.862385] brd: module loaded
[ 1.867964] loop: module loaded
[ 1.871509] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.881515] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 1.882497] Copyright (c) 1999-2006 Intel Corporation.
[ 1.893432] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 1.894409] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.905632] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.906616] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.917539] tg3.c:v3.102 (September 1, 2009)
[ 1.918477] xen: registering gsi 36 triggering 0 polarity 1
[ 1.918477] alloc irq_desc for 36 on node 0
[ 1.918477] alloc kstat_irqs on node 0
[ 1.935983] xen: --> irq=36
[ 1.938871] tg3 0000:08:04.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[ 1.954020] eth0: Tigon3 [partno(BCM95715) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:e0:81:80:1d:a0
[ 1.955007] eth0: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.955007] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.955007] eth0: dma_rwctrl[76148000] dma_mask[64-bit]
[ 1.955007] xen: registering gsi 36 triggering 0 polarity 1
[ 1.955007] xen_allocate_pirq: returning irq 36 for gsi 36
[ 1.955007] xen: --> irq=36
[ 1.996966] Already setup the GSI :36
[ 1.997945] tg3 0000:08:04.1: PCI INT B -> GSI 36 (level, low) -> IRQ 36
[ 2.017354] eth1: Tigon3 [partno(BCM95715) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:e0:81:80:1d:a1
[ 2.018103] eth1: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 2.018103] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.018103] eth1: dma_rwctrl[76148000] dma_mask[64-bit]
[ 2.046432] sky2 driver version 1.25
[ 2.050489] tun: Universal TUN/TAP device driver, 1.6
[ 2.051472] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.062242] console [netcon0] enabled
[ 2.063216] netconsole: network logging started
[ 2.063216] Fusion MPT base driver 3.04.12
[ 2.063216] Copyright (c) 1999-2008 LSI Corporation
[ 2.063216] Fusion MPT SPI Host driver 3.04.12
[ 2.084336] Fusion MPT FC Host driver 3.04.12
[ 2.088936] Fusion MPT SAS Host driver 3.04.12
[ 2.089915] xen: registering gsi 35 triggering 0 polarity 1
[ 2.089915] alloc irq_desc for 35 on node 0
[ 2.089915] alloc kstat_irqs on node 0
[ 2.107620] xen: --> irq=35
[ 2.110504] mptsas 0000:06:00.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35
[ 2.117842] mptbase: ioc0: Initiating bringup
[ 2.400035] ioc0: LSISAS1064E B1: Capabilities={Initiator}
[ 2.401017] mptsas 0000:06:00.0: setting latency timer to 64
[ 7.454909] scsi0 : ioc0: LSISAS1064E B1, FwRev=010a0000h, Ports=1, MaxQ=511, IRQ=35
[ 7.485256] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.486238] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[ 7.498278] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
[ 7.499028] xen: registering gsi 10 triggering 0 polarity 1
[ 7.499028] xen_allocate_pirq: returning irq 10 for gsi 10
[ 7.499028] xen: --> irq=10
[ 7.518161] Already setup the GSI :10
[ 7.519139] ehci_hcd 0000:00:03.2: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
[ 7.519139] ehci_hcd 0000:00:03.2: EHCI Host Controller
[ 7.535734] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file 'devices'
[ 7.545239] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 7.554552] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
[ 7.555533] ehci_hcd 0000:00:03.2: reset hcs_params 0x2214 dbg=0 cc=2 pcc=2 ordered ports=4
[ 7.555533] ehci_hcd 0000:00:03.2: reset hcc_params a010 thresh 1 uframes 1024
[ 7.577840] ehci_hcd 0000:00:03.2: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
[ 7.578771] ehci_hcd 0000:00:03.2: ...powerup ports...
[ 7.614066] ehci_hcd 0000:00:03.2: MWI active
[ 7.615020] ehci_hcd 0000:00:03.2: supports USB remote wakeup
[ 7.615020] ehci_hcd 0000:00:03.2: irq 10, io mem 0xd8512000
[ 7.615020] ehci_hcd 0000:00:03.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 7.615020] ehci_hcd 0000:00:03.2: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 7.647262] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
[ 7.653193] usb usb1: default language 0x0409
[ 7.657663] usb usb1: udev 1, busnum 1, minor = 0
[ 7.658620] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.658620] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.658620] usb usb1: Product: EHCI Host Controller
[ 7.658620] usb usb1: Manufacturer: Linux 2.6.32.17 ehci_hcd
[ 7.658620] usb usb1: SerialNumber: 0000:00:03.2
[ 7.692319] usb usb1: usb_probe_device
[ 7.693294] usb usb1: configuration #1 chosen from 1 choice
[ 7.701810] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 7.707805] hub 1-0:1.0: usb_probe_interface
[ 7.708781] hub 1-0:1.0: usb_probe_interface - got id
[ 7.708781] hub 1-0:1.0: USB hub found
[ 7.721140] hub 1-0:1.0: 4 ports detected
[ 7.722111] hub 1-0:1.0: standalone hub
[ 7.722111] hub 1-0:1.0: individual port power switching
[ 7.722111] hub 1-0:1.0: individual port over-current protection
[ 7.722111] hub 1-0:1.0: power on to power good time: 20ms
[ 7.746136] hub 1-0:1.0: local power source is good
[ 7.747104] hub 1-0:1.0: enabling power on all ports
[ 7.756207] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 7.765667] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.766637] ohci_hcd: block sizes: ed 64 td 64
[ 7.766637] xen: registering gsi 10 triggering 0 polarity 1
[ 7.766637] xen_allocate_pirq: returning irq 10 for gsi 10
[ 7.766637] xen: --> irq=10
[ 7.790625] Already setup the GSI :10
[ 7.791605] ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
[ 7.791605] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 7.791605] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002'
[ 7.817418] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 7.818401] ohci_hcd 0000:00:03.0: created debug files
[ 7.818401] ohci_hcd 0000:00:03.0: supports USB remote wakeup
[ 7.818401] ohci_hcd 0000:00:03.0: irq 10, io mem 0xd8510000
[ 7.856074] ehci_hcd 0000:00:03.2: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT
[ 7.864341] hub 1-0:1.0: port 2: status 0501 change 0001
[ 7.892063] ohci_hcd 0000:00:03.0: OHCI controller state
[ 7.893020] ohci_hcd 0000:00:03.0: OHCI 1.0, NO legacy support registers
[ 7.893020] ohci_hcd 0000:00:03.0: control 0x283 RWC HCFS=operational CBSR=3
[ 7.893020] ohci_hcd 0000:00:03.0: cmdstatus 0x00000 SOC=0
[ 7.893020] ohci_hcd 0000:00:03.0: intrstatus 0x00000044 RHSC SF
[ 7.893020] ohci_hcd 0000:00:03.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 7.893020] ohci_hcd 0000:00:03.0: hcca frame #0026
[ 7.893020] ohci_hcd 0000:00:03.0: roothub.a 00000202 POTPGT=0 NPS NDP=2(2)
[ 7.893020] ohci_hcd 0000:00:03.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 7.893020] ohci_hcd 0000:00:03.0: roothub.status 00008000 DRWE
[ 7.893020] ohci_hcd 0000:00:03.0: roothub.portstatus [0] 0x00000100 PPS
[ 7.893020] ohci_hcd 0000:00:03.0: roothub.portstatus [1] 0x00000100 PPS
[ 7.968178] usb usb2: default language 0x0409
[ 7.972710] hub 1-0:1.0: state 7 ports 4 chg 0004 evt 0000
[ 7.972717] usb usb2: udev 1, busnum 2, minor = 128
[ 7.972722] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.972725] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.972729] usb usb2: Product: OHCI Host Controller
[ 7.972733] usb usb2: Manufacturer: Linux 2.6.32.17 ohci_hcd
[ 7.972736] usb usb2: SerialNumber: 0000:00:03.0
[ 7.973055] usb usb2: usb_probe_device
[ 7.973059] usb usb2: configuration #1 chosen from 1 choice
[ 7.973070] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 7.973192] hub 2-0:1.0: usb_probe_interface
[ 7.973195] hub 2-0:1.0: usb_probe_interface - got id
[ 7.973199] hub 2-0:1.0: USB hub found
[ 7.974055] hub 2-0:1.0: 2 ports detected
[ 7.974059] hub 2-0:1.0: standalone hub
[ 7.974061] hub 2-0:1.0: no power switching (usb 1.0)
[ 7.974064] hub 2-0:1.0: global over-current protection
[ 7.974066] hub 2-0:1.0: power on to power good time: 0ms
[ 7.974080] hub 2-0:1.0: local power source is good
[ 7.974083] hub 2-0:1.0: no over-current condition exists
[ 7.974087] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 7.974117] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 7.974221] xen: registering gsi 10 triggering 0 polarity 1
[ 7.974226] xen_allocate_pirq: returning irq 10 for gsi 10
[ 7.974229] xen: --> irq=10
[ 7.974232] Already setup the GSI :10
[ 7.974237] ohci_hcd 0000:00:03.1: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
[ 7.974281] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 7.974288] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003'
[ 7.974492] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 7.975451] ohci_hcd 0000:00:03.1: created debug files
[ 7.975454] ohci_hcd 0000:00:03.1: supports USB remote wakeup
[ 7.975466] ohci_hcd 0000:00:03.1: irq 10, io mem 0xd8511000
[ 8.026069] ohci_hcd 0000:00:03.1: OHCI controller state
[ 8.026076] ohci_hcd 0000:00:03.1: OHCI 1.0, NO legacy support registers
[ 8.026082] ohci_hcd 0000:00:03.1: control 0x283 RWC HCFS=operational CBSR=3
[ 8.026090] ohci_hcd 0000:00:03.1: cmdstatus 0x00000 SOC=0
[ 8.026097] ohci_hcd 0000:00:03.1: intrstatus 0x00000040 RHSC
[ 8.026106] ohci_hcd 0000:00:03.1: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 8.026128] ohci_hcd 0000:00:03.1: hcca frame #0000
[ 8.026141] ohci_hcd 0000:00:03.1: roothub.a 00000202 POTPGT=0 NPS NDP=2(2)
[ 8.026146] ohci_hcd 0000:00:03.1: roothub.b 00000000 PPCM=0000 DR=0000
[ 8.026152] ohci_hcd 0000:00:03.1: roothub.status 00008000 DRWE
[ 8.026161] ohci_hcd 0000:00:03.1: roothub.portstatus [0] 0x00000100 PPS
[ 8.026167] ohci_hcd 0000:00:03.1: roothub.portstatus [1] 0x00000100 PPS
[ 8.026188] usb usb3: default language 0x0409
[ 8.026201] usb usb3: udev 1, busnum 3, minor = 256
[ 8.026204] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.026207] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.026211] usb usb3: Product: OHCI Host Controller
[ 8.026213] usb usb3: Manufacturer: Linux 2.6.32.17 ohci_hcd
[ 8.026216] usb usb3: SerialNumber: 0000:00:03.1
[ 8.026409] usb usb3: usb_probe_device
[ 8.026413] usb usb3: configuration #1 chosen from 1 choice
[ 8.026422] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 8.026544] hub 3-0:1.0: usb_probe_interface
[ 8.026547] hub 3-0:1.0: usb_probe_interface - got id
[ 8.026550] hub 3-0:1.0: USB hub found
[ 8.027637] hub 3-0:1.0: 2 ports detected
[ 8.027641] hub 3-0:1.0: standalone hub
[ 8.027643] hub 3-0:1.0: no power switching (usb 1.0)
[ 8.027646] hub 3-0:1.0: global over-current protection
[ 8.027649] hub 3-0:1.0: power on to power good time: 0ms
[ 8.027662] hub 3-0:1.0: local power source is good
[ 8.027665] hub 3-0:1.0: no over-current condition exists
[ 8.027668] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 8.027690] /root/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 8.027909] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.028227] usbcore: registered new interface driver usblp
[ 8.028234] Initializing USB Mass Storage driver...
[ 8.028357] usbcore: registered new interface driver usb-storage
[ 8.028362] USB Mass Storage support registered.
[ 8.028485] usbcore: registered new interface driver libusual
[ 8.028736] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 8.031878] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.031878] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 8.032782] mice: PS/2 mouse device common for all mice
[ 8.033659] rtc_cmos 00:06: RTC can wake from S4
[ 8.033826] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 8.033898] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 8.034678] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 8.035324] cpuidle: using governor ladder
[ 8.035329] cpuidle: using governor menu
[ 8.038392] usbcore: registered new interface driver hiddev
[ 8.038504] usbcore: registered new interface driver usbhid
[ 8.038509] usbhid: v2.6:USB HID core driver
[ 8.038910] Advanced Linux Sound Architecture Driver Version 1.0.21.
modprobe: FATAL: Could not load /lib/modules/2.6.32.17/modules.dep: No such file or directory[ 8.461457] h
ub 1-0:1.0: port\r 2, status 0501,
change 0000, 480 Mb/s
[ 8.476510] ehci_hcd 0000:00:03.2: port 2 low speed --> companion
[ 8.477233] ALSA device list:
[ 8.477237] No soundcards found.
[ 8.477383] Netfilter messages via NETLINK v0.30.
[ 8.477430] nf_conntrack version 0.5.0 (12072 buckets, 48288 max)
[ 8.477966] ctnetlink v0.93: registering with nfnetlink.
[ 8.478763] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.478836] TCP cubic registered
[ 8.478840] Initializing XFRM netlink socket
[ 8.479598] NET: Registered protocol family 10
[ 8.482664] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.482776] IPv6 over IPv4 tunneling driver
[ 8.483821] NET: Registered protocol family 17
[ 8.484045] Using IPI No-Shortcut mode
[ 8.484430] PM: Resume from disk failed.
[ 8.484457] registered taskstats version 1
[ 8.485709] Magic number: 6:773:693
[ 8.485996] Freeing unused kernel memory: 460k freed
[ 8.557949] Write protecting the kernel text: 4912k
[ 8.564776] Write protecting the kernel read-only data: 2364k
Loading, please wait...
[ 8.609131] ehci_hcd 0000:00:03.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
[ 8.617451] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 8.623050] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 8.704179] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 8.709805] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
[ 8.718844] hub 2-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[ 8.828127] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[ 8.941133] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 9.002128] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 9.204157] ohci_hcd 0000:00:03.1: auto-stop root hub
[ 9.639073] sata_svw 0000:01:0e.0: version 2.3
[ 9.644030] ACPI: PCI Interrupt Link [LNKS] enabled at IRQ 11
[ 9.645008] xen: registering gsi 11 triggering 0 polarity 1
[ 9.654371] scsi1 : pata_serverworks
[ 9.654571] scsi2 : pata_serverworks
[ 9.655259] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0x4800 irq 14
[ 9.655263] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0x4808 irq 15
[ 9.654195] xen_allocate_pirq: returning irq 11 for gsi 11
[ 9.654195] xen: --> irq=11
[ 9.685090] Already setup the GSI :11
[ 9.688927] sata_svw 0000:01:0e.0: PCI INT A -> Link[LNKS] -> GSI 11 (level, low) -> IRQ 11
[ 9.698066] scsi3 : sata_svw
[ 9.701396] scsi4 : sata_svw
[ 9.704785] scsi5 : sata_svw
[ 9.708230] scsi6 : sata_svw
[ 9.711438] ata3: SATA max UDMA/133 mmio m8192@0xd8300000 port 0xd8300000 irq 11
[ 9.712260] ata4: SATA max UDMA/133 mmio m8192@0xd8300000 port 0xd8300100 irq 11
[ 9.726436] ata5: SATA max UDMA/133 mmio m8192@0xd8300000 port 0xd8300200 irq 11
[ 9.727391] ata6: SATA max UDMA/133 mmio m8192@0xd8300000 port 0xd8300300 irq 11
[ 9.741488] xen: registering gsi 11 triggering 0 polarity 1
[ 9.741488] xen_allocate_pirq: returning irq 11 for gsi 11
[ 9.741488] xen: --> irq=11
[ 9.755768] Already setup the GSI :11
[ 9.759637] sata_svw 0000:01:0e.1: PCI INT A -> Link[LNKS] -> GSI 11 (level, low) -> IRQ 11
[ 9.810554] ata1.01: ATAPI: DV-28E-R, 1.8A, max UDMA/33
[ 9.838708] ata1.01: configured for UDMA/33
[ 9.848372] scsi 1:0:1:0: CD-ROM TEAC DV-28E-R 1.8A PQ: 0 ANSI: 5
[ 9.866425] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 9.867365] Uniform CD-ROM driver Revision: 3.20
[ 9.877566] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 9.882507] sr 1:0:1:0: Attached scsi generic sg0 type 5
[ 10.051237] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 10.700123] hub 1-0:1.0: hub_suspend
[ 10.703826] usb usb1: bus auto-suspend
[ 10.704766] ehci_hcd 0000:00:03.2: suspend root hub
[ 10.713453] hub 3-0:1.0: hub_suspend
[ 10.717138] usb usb3: bus auto-suspend
[ 10.718094] ohci_hcd 0000:00:03.1: suspend root hub
[ 14.009056] ohci_hcd 0000:00:03.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
[ 15.061078] ata3.00: qc timeout (cmd 0x27)
[ 15.062017] ata3.00: failed to read native max address (err_mask=0x4)
[ 15.062017] ata3.00: HPA support seems broken, skipping HPA handling
[ 15.381079] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 15.390261] ata3.00: ATA-7: ST3160815AS, 3.AAC, max UDMA/133
[ 15.391018] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 15.408285] ata3.00: configured for UDMA/133
[ 15.412857] scsi 3:0:0:0: Direct-Access ATA ST3160815AS 3.AA PQ: 0 ANSI: 5
[ 15.421556] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 15.421712] sd 3:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 15.421811] sd 3:0:0:0: [sda] Write Protect is off
[ 15.421815] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 15.421864] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.422159] sda:
[ 15.760084] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 20.769058] ata4.00: qc timeout (cmd 0x27)
[ 20.770021] ata4.00: failed to read native max address (err_mask=0x4)
[ 20.770021] ata4.00: HPA support seems broken, skipping HPA handling
[ 21.089079] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 21.098261] ata4.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[ 21.099018] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 21.115289] ata4.00: configured for UDMA/133
[ 21.119756] scsi 4:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5
[ 21.128260] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 21.128450] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 21.128545] sd 4:0:0:0: [sdb] Write Protect is off
[ 21.128549] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 21.128597] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.128915] sdb:
[ 21.468017] ata5: SATA link down (SStatus 4 SControl 300)
[ 21.789017] ata6: SATA link down (SStatus 4 SControl 300)
[ 45.685107] ata3: lost interrupt (Status 0x50)
[ 45.686075] sd 3:0:0:0: [sda] Unhandled error code
[ 45.686075] sd 3:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 45.686075] sd 3:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 45.686075] end_request: I/O error, dev sda, sector 0
[ 45.686075] Buffer I/O error on device sda, logical block 0
[ 51.682105] ata4: lost interrupt (Status 0x50)
[ 51.683087] sd 4:0:0:0: [sdb] Unhandled error code
[ 51.683087] sd 4:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 51.683087] sd 4:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 51.683087] end_request: I/O error, dev sdb, sector 0
[ 51.683087] Buffer I/O error on device sdb, logical block 0
[ 76.685075] ata3: lost interrupt (Status 0x50)
[ 76.686054] sd 3:0:0:0: [sda] Unhandled error code
[ 76.686054] sd 3:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 76.686054] sd 3:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 76.686054] end_request: I/O error, dev sda, sector 0
[ 76.686054] Buffer I/O error on device sda, logical block 0
[ 82.685107] ata4: lost interrupt (Status 0x50)
[ 82.686088] sd 4:0:0:0: [sdb] Unhandled error code
[ 82.686088] sd 4:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 82.686088] sd 4:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 82.686088] end_request: I/O error, dev sdb, sector 0
[ 82.686088] Buffer I/O error on device sdb, logical block 0
[ 107.685055] ata3: lost interrupt (Status 0x50)
[ 107.686032] sd 3:0:0:0: [sda] Unhandled error code
[ 107.686032] sd 3:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 107.686032] sd 3:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 107.686032] end_request: I/O error, dev sda, sector 0
[ 107.686032] Buffer I/O error on device sda, logical block 0
[ 113.685093] ata4: lost interrupt (Status 0x50)
[ 113.686073] sd 4:0:0:0: [sdb] Unhandled error code
[ 113.686073] sd 4:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 113.686073] sd 4:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 113.703026] end_request: I/O error, dev sdb, sector 0
[ 113.703026] Buffer I/O error on device sdb, logical block 0
[-- Attachment #4: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Re: IRQs, move_in_progress, -EBUSY &c
2010-08-11 17:49 ` George Dunlap
@ 2010-08-11 18:18 ` Keir Fraser
2010-08-11 19:06 ` George Dunlap
0 siblings, 1 reply; 10+ messages in thread
From: Keir Fraser @ 2010-08-11 18:18 UTC (permalink / raw)
To: George Dunlap
Cc: Fitzhardinge, xen-devel@lists.xensource.com, Jeremy,
Zhang, Xiantao, Konrad Rzeszutek Wilk
On 11/08/2010 18:49, "George Dunlap" <George.Dunlap@eu.citrix.com> wrote:
> Seems to work about 50/50.
>
> Attached is a log of a successful boot (exile.008.log), and a failed
> boot (exile.009.log). Suspicious things about the failed case: the
> usb code starts to initialize before the SATA code finishes
> initializing, and complains that "Controller is probably using the
> wrong IRQ".
Cc'ing Xiantao Zhang, who submitted the per-CPU IDT patches. Perhaps he has
some ideas how to fix this. The only other simple thing I can think to try
is to modify my patch so that it loops in the hypervisor. Something like:
do{ ret = mp_register_gsi(...}; } while (ret == -EBUSY);
Since the condition being EBUSYed on is cleared in hardirq context, that
should be safe.
Apart from that, it is possible that greater surgery is neede don the
per-CPU IDT and IRQ migration logic, and I think we need Xiantao's help for
that.
-- Keir
> Keir: the machine in question (as you may have guessed) is exile; let
> me know if you want to grab it and use it directly.
>
> -George
>
> On Wed, Aug 11, 2010 at 4:59 PM, Keir Fraser <keir.fraser@eu.citrix.com>
> wrote:
>> On 11/08/2010 15:56, "George Dunlap" <George.Dunlap@eu.citrix.com> wrote:
>>
>>> However, it seems that moving IRQs is not handled properly. Either
>>> the pvops kernel should retry if it gets an -EBUSY, or the hypercall
>>> should not fail, but wait until it can return success.
>>
>> Can you try the attached patch?
>>
>> Thanks,
>> Keir
>>
>>> I discovered all this by adding debug statements to the IRQ path; the
>>> patch is attached, if anyone else wants to use it.
>>>
>>> -George
>>
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Re: IRQs, move_in_progress, -EBUSY &c
2010-08-11 18:18 ` Keir Fraser
@ 2010-08-11 19:06 ` George Dunlap
2010-08-11 19:12 ` Keir Fraser
2010-08-11 19:28 ` George Dunlap
0 siblings, 2 replies; 10+ messages in thread
From: George Dunlap @ 2010-08-11 19:06 UTC (permalink / raw)
To: Keir Fraser
Cc: Fitzhardinge, xen-devel@lists.xensource.com, Zhang, Xiantao,
Konrad Rzeszutek Wilk
Looks like there are other callers of __assign_irq_vector() which also
don't handle the -EBUSY return value, namely
xen/arch/x86/io_apic.c:set_desc_affinity().
Unfortunately, set_desc_affinity() cannot simply loop until it stops
getting -EBUSY, as it is almost always called with irqs disabled -- so
the very IPI which will call the function to make it not busy anymore
is blocked. And it only returns one value (a cpu mask), and the
function which calls it returns no value at all; so we can's pass the
"loop and retry" up one more level; we'd have to do a ton more code
rewriting to be able to handle retries.
Can we just call the cleanup function directly if we get -EBUSY?
-George
On Wed, Aug 11, 2010 at 7:18 PM, Keir Fraser <keir.fraser@eu.citrix.com> wrote:
> On 11/08/2010 18:49, "George Dunlap" <George.Dunlap@eu.citrix.com> wrote:
>
>> Seems to work about 50/50.
>>
>> Attached is a log of a successful boot (exile.008.log), and a failed
>> boot (exile.009.log). Suspicious things about the failed case: the
>> usb code starts to initialize before the SATA code finishes
>> initializing, and complains that "Controller is probably using the
>> wrong IRQ".
>
> Cc'ing Xiantao Zhang, who submitted the per-CPU IDT patches. Perhaps he has
> some ideas how to fix this. The only other simple thing I can think to try
> is to modify my patch so that it loops in the hypervisor. Something like:
> do{ ret = mp_register_gsi(...}; } while (ret == -EBUSY);
> Since the condition being EBUSYed on is cleared in hardirq context, that
> should be safe.
>
> Apart from that, it is possible that greater surgery is neede don the
> per-CPU IDT and IRQ migration logic, and I think we need Xiantao's help for
> that.
>
> -- Keir
>
>> Keir: the machine in question (as you may have guessed) is exile; let
>> me know if you want to grab it and use it directly.
>>
>> -George
>>
>> On Wed, Aug 11, 2010 at 4:59 PM, Keir Fraser <keir.fraser@eu.citrix.com>
>> wrote:
>>> On 11/08/2010 15:56, "George Dunlap" <George.Dunlap@eu.citrix.com> wrote:
>>>
>>>> However, it seems that moving IRQs is not handled properly. Either
>>>> the pvops kernel should retry if it gets an -EBUSY, or the hypercall
>>>> should not fail, but wait until it can return success.
>>>
>>> Can you try the attached patch?
>>>
>>> Thanks,
>>> Keir
>>>
>>>> I discovered all this by adding debug statements to the IRQ path; the
>>>> patch is attached, if anyone else wants to use it.
>>>>
>>>> -George
>>>
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>>
>>>
>
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Re: IRQs, move_in_progress, -EBUSY &c
2010-08-11 19:06 ` George Dunlap
@ 2010-08-11 19:12 ` Keir Fraser
2010-08-11 19:52 ` George Dunlap
2010-08-11 19:28 ` George Dunlap
1 sibling, 1 reply; 10+ messages in thread
From: Keir Fraser @ 2010-08-11 19:12 UTC (permalink / raw)
To: George Dunlap
Cc: Fitzhardinge, xen-devel@lists.xensource.com, Zhang, Xiantao,
Konrad Rzeszutek Wilk
On 11/08/2010 20:06, "George Dunlap" <George.Dunlap@eu.citrix.com> wrote:
> Looks like there are other callers of __assign_irq_vector() which also
> don't handle the -EBUSY return value, namely
> xen/arch/x86/io_apic.c:set_desc_affinity().
Looks like its callers do the same as on native Linux though -- namely
silently bail on error. I think the set_affinity type callers are pretty
benign if they fail-as-noop. In all of this, where possible I think we just
have to stay close to what Linux does.
-- Keir
> Unfortunately, set_desc_affinity() cannot simply loop until it stops
> getting -EBUSY, as it is almost always called with irqs disabled -- so
> the very IPI which will call the function to make it not busy anymore
> is blocked. And it only returns one value (a cpu mask), and the
> function which calls it returns no value at all; so we can's pass the
> "loop and retry" up one more level; we'd have to do a ton more code
> rewriting to be able to handle retries.
>
> Can we just call the cleanup function directly if we get -EBUSY?
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Re: IRQs, move_in_progress, -EBUSY &c
2010-08-11 19:06 ` George Dunlap
2010-08-11 19:12 ` Keir Fraser
@ 2010-08-11 19:28 ` George Dunlap
1 sibling, 0 replies; 10+ messages in thread
From: George Dunlap @ 2010-08-11 19:28 UTC (permalink / raw)
To: Keir Fraser
Cc: Fitzhardinge, xen-devel@lists.xensource.com, Zhang, Xiantao,
Konrad Rzeszutek Wilk
On Wed, Aug 11, 2010 at 8:06 PM, George Dunlap
<George.Dunlap@eu.citrix.com> wrote:
> Can we just call the cleanup function directly if we get -EBUSY?
If anyone is curious about the answer to this one, it's "No... at
least, not simply." I tried it, and it hangs; probably waiting to
grab a spinlock held by someone who disabled IRQs to make sure this
didn't happen.
-George
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Re: IRQs, move_in_progress, -EBUSY &c
2010-08-11 19:12 ` Keir Fraser
@ 2010-08-11 19:52 ` George Dunlap
0 siblings, 0 replies; 10+ messages in thread
From: George Dunlap @ 2010-08-11 19:52 UTC (permalink / raw)
To: Keir Fraser
Cc: Fitzhardinge, xen-devel@lists.xensource.com, Zhang, Xiantao,
Konrad Rzeszutek Wilk
On Wed, Aug 11, 2010 at 8:12 PM, Keir Fraser <keir.fraser@eu.citrix.com> wrote:
> Looks like its callers do the same as on native Linux though -- namely
> silently bail on error. I think the set_affinity type callers are pretty
> benign if they fail-as-noop. In all of this, where possible I think we just
> have to stay close to what Linux does.
Hmm... maybe the failed affinity set is a red herring, then, as I'm
seeing them also in successful boots.
-George
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2010-08-11 19:52 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-08-11 14:56 IRQs, move_in_progress, -EBUSY &c George Dunlap
2010-08-11 15:04 ` Keir Fraser
2010-08-11 15:38 ` Jeremy Fitzhardinge
2010-08-11 15:59 ` Keir Fraser
2010-08-11 17:49 ` George Dunlap
2010-08-11 18:18 ` Keir Fraser
2010-08-11 19:06 ` George Dunlap
2010-08-11 19:12 ` Keir Fraser
2010-08-11 19:52 ` George Dunlap
2010-08-11 19:28 ` George Dunlap
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).