xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Sky Liu <blackskygg@gmail.com>
To: Stefano Stabellini <sstabellini@kernel.org>
Cc: "xen-devel@lists.xenproject.org" <xen-devel@lists.xenproject.org>,
	Julien Grall <julien.grall@arm.com>,
	"andrew.cooper3@citrix.com" <andrew.cooper3@citrix.com>,
	Lars Kurth <lars.kurth@citrix.com>
Subject: [GSoC]about the task "Share a page in memory from the VM config file"
Date: Sun, 5 Mar 2017 12:58:11 +0800	[thread overview]
Message-ID: <CAHrd_jphaUSqHyYYkrF+UZMNyv79Ln1dSX5ymjmKbvNQaa1C5A@mail.gmail.com> (raw)
In-Reply-To: <alpine.DEB.2.10.1703031113520.17906@sstabellini-ThinkPad-X260>


[-- Attachment #1.1: Type: text/plain, Size: 2356 bytes --]

Thanks for your suggestions.
I think I'll try XEN-41.

Best Regards,
Zhongze Liu.

2017-03-04 3:25 GMT+08:00 Stefano Stabellini <sstabellini@kernel.org
<javascript:;>>:
> On Sat, 4 Mar 2017, Sky Liu wrote:
>> 2017-03-02 3:36 GMT+08:00 Stefano Stabellini <sstabellini@kernel.org
<javascript:;>>:
>> >
>> > Thank you for your interest in this project and Xen!
>> >
>> > Firstly, I would recommend to install Xen from source on your test
>> > machine. If you don't have a test machine, you could install it on your
>> > laptop. Alternatively, Xen on ARM works well on the Cubietruck, also
>> > known as Cubieboard 2 [1][2]. Finally, Xen works also well on top of
Xen
>> > or KVM virtual machines on x86 (nested virtualization), so that would
be
>> > another way to test it.
>> >
>> > I fully agree that the best way to get started is by submitting small
>> > patches.  We'll get back to you soon with some examples of potential
>> > small fixes to do. In the meantime, I encourage you to setup a dev and
>> > test environment.
>> >
>> >
>> > [1] https://wiki.xenproject.org/wiki/Xen_ARM_with_
Virtualization_Extensions/Allwinner
>> > [2] http://www.cubietruck.com/collections/frontpage/
products/cubietruck-cubieboard3-cortex-a7-dual-core-2gb-ram-8gb-flash-with-
wifi-bt-1
>>
>> Hi, Stefano Stabellini.
>>
>> Thanks for getting back to me and sorry for my late reply.
>>
>> I've already set up the development environment on my ArchLinux
>> laptop(ASUS A555L),
>>  with the following uname -a:
>>      Linux sky-arch 4.9.11-1-ARCH #1 SMP PREEMPT Sun Feb 19 13:45:52
>> UTC 2017 x86_64 GNU/Linux
>>
>> I've also installed and tested it out, and it works quite normally.
>> In order to make things work on ArchLinux,
>> I've written two scripts to assist the build and install process.
>> (See: https://gist.github.com/blackskygg/2c1f63de6b96f035976dd44aaa39170b
).
>>
>> Hope to hear back from you soon.
>
> That's good to hear. In terms of initial small contributions to get
> familiar with Xen, give a look at the list of open issues:
>
> https://xenproject.atlassian.net/projects/XEN/board
>
> most of them are large projects, but some of them are small enough for
> an initial contributions, for example, XEN-41 (Allow a default command
> line to be embedded in the hypervisor using Kconfig) and XEN-29 (Add
> -fstack-protector support to the hypervisor).

[-- Attachment #1.2: Type: text/html, Size: 3681 bytes --]

[-- Attachment #2: Type: text/plain, Size: 127 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

  reply	other threads:[~2017-03-05  4:58 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-01 11:54 [GSoC]about the task "Share a page in memory from the VM config file" Sky Liu
2017-03-01 19:36 ` Stefano Stabellini
2017-03-03 17:13   ` Sky Liu
2017-03-03 19:25     ` Stefano Stabellini
2017-03-05  4:58       ` Sky Liu [this message]
2017-03-23  0:13         ` Zhongze Liu
2017-03-23  1:00           ` Stefano Stabellini
2017-03-28 17:36             ` Stefano Stabellini
2017-03-29  0:15               ` Stefano Stabellini
2017-03-30  1:07                 ` Zhongze Liu
2017-03-30  2:33                   ` Zhongze Liu
2017-03-30 17:52                     ` Stefano Stabellini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAHrd_jphaUSqHyYYkrF+UZMNyv79Ln1dSX5ymjmKbvNQaa1C5A@mail.gmail.com \
    --to=blackskygg@gmail.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=julien.grall@arm.com \
    --cc=lars.kurth@citrix.com \
    --cc=sstabellini@kernel.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).